Caterpillarpaving compactorvibratory compactor
Caterpillar CB-434D
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar CB-434D is a tandem vibratory smooth-drum compactor built for asphalt and paving compaction work, sized in the 7 to 7.5 metric ton class. It runs a Cat 3054C 4-cylinder turbocharged diesel, 4.4 L displacement, mechanically governed with mechanical fuel injection, rated at about 62 kW (83 hp) gross and 59 kW (79.2 hp) net, meeting Tier 2 / Stage II emissions. Operating weight runs 7,380-7,570 kg (16,270-16,689 lb) on the standard-drum machine depending on configuration; the extra-wide XW variant, with a 1.70 m (67 in) drum versus the standard 1.50 m (59 in), runs close to 7,700 kg (16,979 lb). Cat built the D-series roughly from 2004 into the early 2010s under a single CNH serial-prefix range covering both drum widths. It replaced the earlier CB-434 (no D suffix), a different and older chassis generation from the 1990s, and was eventually succeeded by the CB44, later folded into the CB4.4 tandem vibratory roller line in roughly the same size class.
The D-series update over the prior generation added automatic speed control with an impact-spacing indicator, a redesigned operator's station, and a vertical-yoke articulation frame carrying a 50/50 front-rear weight split for steadier mat contact through the turn. Vibratory control also expanded: depending on how a given unit was ordered, it left the factory with a single-frequency multi-amplitude system, a dual-amplitude system, or a dual-amplitude/dual-frequency system switching between roughly 53 Hz and 70 Hz. The engine itself did not change in kind: the 3054C stayed mechanically governed with mechanical injection and no engine ECM, which keeps diagnostics simple but also means no dashboard warning light or aftertreatment system masks a history of skipped service. In the used and parts market, the CB-434D remains a common find on municipal and commercial paving fleets. Its size, hydrostatic direct-drive drums, and the single CNH serial prefix spanning both standard and XW builds keep parts identification straightforward on a model now out of production, though the exact factory vibratory configuration on any given unit should be checked against its compliance plate rather than assumed from a sale listing.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar CB-434D specifications
Engine
| Engine model | Cat 3054C, inline 4-cylinder turbocharged diesel |
| Gross power | 62 kW (83 hp) |
| Net power | 59 kW (79.2 hp) |
| Displacement | 4.4 L / 4,402 cc (268.6 cu in) |
| Emissions tier | U.S. EPA Tier 2 and E.U. Stage II |
Weights
| Operating weight | 7,380-7,570 kg (16,270-16,689 lb) for the standard-drum machine, depending on configuration; the wide-drum XW variant runs about 7,700 kg (16,979 lb) |
| Drum static linear load | approx. 2.5 kg/cm (140 lb/in) on the standard drum; some published figures run as high as 6.4 kg/cm (360 lb/in) - treat as a class range and confirm against the specific spec sheet |
Dimensions
| Transport length | 4.20 m (165 in / 13 ft 9 in) |
| Transport width (overall) | 1.67 m (66 in); wide-drum XW variant up to 1.70 m (67 in) |
| Transport height | 3.01 m (119 in / 9 ft 11 in) |
| Wheelbase | 3.10 m (10.2 ft) |
| Drum width | 1.50 m (59 in) standard; 1.70 m (67 in) on the XW wide-drum variant |
| Drum diameter | 1.07-1.10 m (42-43.4 in), figure varies slightly by source |
| Ground clearance | 0.26-0.27 m (0.84-0.9 ft) |
Performance
| Maximum travel speed | 11.6-11.8 km/h (7.0-7.3 mph) |
| Vibration frequency | dual-frequency system: 70 Hz / 53 Hz (4,200/3,200 vpm); the standard single-frequency system runs at 53 Hz with a choice of five amplitude settings |
| Vibration amplitude | dual-frequency system: 0.69 mm (0.027 in) high / 0.25 mm (0.01 in) low |
| Centrifugal force | approx. 78 kN (17,550 lbf) maximum; approx. 29 kN (6,525 lbf) minimum |
Service capacities (summary)
| Fuel tank | 132 L (34.9 US gal) |
| Hydraulic system | 50.3 L (13.3 US gal) |
| Engine oil | 9.1 L (2.4 US gal) |
| Cooling system | 18.2 L (4.8 US gal) |
| Water spray tank | 800 L (211 US gal), for the drum water/dust-suppression system |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
CB-434D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 9 L (2.4 US gal) | Cat DEO (Diesel Engine Oil), API CG-4/CH-4 performance level for the Cat 3054C 4-cylinder diesel. SAE 15W-40 covers most ambient ranges; drop to SAE 10W-30 in cold-weather service for easier cold starts. |
| Cooling system | 18 L (4.8 US gal) | Cat ELC (Extended Life Coolant), premix or 50/50 concentrate-to-water blend. Cat DEAC is an accepted service-fill alternative for this machine generation. |
| Fuel tank | 132 L (35 US gal) | No. 2-D diesel fuel at the sulfur grade matching the engine's emissions certification. Switch to a No. 1-D or winter-blend fuel in cold climates to prevent fuel gelling and filter plugging. |
| Hydraulic system (tank) | 50 L (13.3 US gal) | Cat TDTO (Transmission/Drive Train Oil), a single reservoir feeding both the hydrostatic propel drive and the vibratory circuit through a 10-micron charge filter. Use SAE 10W in cold weather, SAE 30 for temperate ranges, SAE 50 in sustained heat. Cat HYDO Advanced is an accepted alternative fill. |
| Vibratory bearing compartment (each drum) | 20 L (5.3 US gal) | Cat Compactor Oil, an ISO VG 220 gear-type oil built for the eccentric-weight bearings inside the drum housing, rated for roughly -20C to 50C service. Cat GO gear oil SAE 80W-90 is an accepted substitute; do not fill this compartment with TO-4 hydraulic oil. |
| Water spray (drum wetting) tank | 800 L (211 US gal) | Clean water for the drum anti-stick spray system. Drain the tank and lines before freezing weather, or dose with a compatible non-corrosive antifreeze agent to prevent freeze damage to the pump and lines. |
| Grease (chassis, articulation joint, drum bearings) | Not a refill volume - applied per grease point at scheduled intervals | Cat multipurpose grease, NLGI grade 2 lithium-complex (Cat MPGM), for general chassis and articulation points. Cat Advanced 3Moly or Cat Desert Duty grease for high-load pivot points or extreme hot/cold service. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar CB-434D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
Servicing the CB-434D beyond the schedule
Predictive Maintenance & Fluid Analysis
Watch the 3054C's oil pressure and boost behavior closely: this engine family has a documented pattern of turbocharger failures that repeat if the real cause (oil supply, filter condition, a sticking wastegate) isn't fixed instead of swapping the turbo. Sample engine and hydraulic oil at scheduled drains, and treat high or erratic oil pressure as a stuck relief valve, not a healthy pump. Check drum-end seals for oil weep periodically, since exciter bearing wear shows up as lost vibration only after the seal has already started leaking.
Corrective & Common Repairs
The most common complaint on this machine is water-spray nozzle and strainer clogging from sediment in the tank, often mistaken for a failed pump. The articulation joint is the highest-wear pivot point; a clunk on direction change or noticeable play there needs attention. A machine that creeps on a grade in neutral, or won't hold on an incline, points to a worn propel pump, motor, or a parking brake not fully applying; treat that as a safety issue. Also check for lost vibration signaling exciter or coupling wear.
Overhaul & Rebuild Points
At teardown, technicians commonly find worn ring lands or thin cylinder liners in the 3054C, along with the turbocharger wear this engine family is known for. Inside the exciter housings, watch for cracked welds, broken spring retainers, or unevenly seated springs, an early sign usually missed until vibration is gone. A worn splined coupling can let the vibratory motor spin without turning the eccentric weight shaft. Drum-end bearing seals are hour-rated wear items due at major rebuild, along with the hydrostatic propel pump and drum drive motors.
Seasonal & Environment Servicing
Drain the water-spray tank, pump, and lines completely before freezing weather; a frozen pump or line looks like a burned-out one until it thaws. Clean water and a seasonal tank rinse cut down the nozzle and strainer clogging that is this machine's most common complaint. Never use starting fluid on the 3054C for cold starts; work through glow/intake heat, fuel condition, and battery health instead. In hot paving conditions, watch hydraulic oil temperature and coolant level given the added heat load from sustained vibratory compaction.
CB-434D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 067-6897 | Element Kit, Fuel Filter | Fuel system service | Check fitment → |
| 1R-1804 | Filter Element-Wtr Sep & Fuel | Fuel system service | Check fitment → |
| 207-2757 | Seal | Fuel system service | Check fitment → |
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
CB-434D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-01 | Engine oil pressure circuit reading below the normal range for current engine speed. | Low oil level, worn oil pump, plugged oil filter, or a faulty pressure sensor/wiring. | Shut down safely, check oil level and filter condition, and inspect sensor wiring before restart. |
| 110-00 | Engine coolant temperature above the normal operating range. | Low coolant level, debris-blocked radiator core, failed thermostat, or a slipping/failed fan drive. | Idle down and shut off once safe, check coolant level, clean radiator fins, and verify fan operation. |
| 168-02 | Charging/electrical system voltage erratic or outside the normal range. | Failed or weak alternator, loose or worn drive belt, or corroded battery terminals and ground straps. | Check belt tension and alternator output, inspect battery terminals and grounds, and load-test the battery. |
| 600-00 | Hydraulic tank oil temperature above the normal operating range (this circuit is numbered differently across Cat monitoring platforms, so treat the exact CID as varying by configuration/series). | Low hydraulic fluid level, oil cooler fins clogged with debris, extended heavy vibratory compaction in hot ambient conditions, or a faulty temperature sensor. | Shut down and let the system cool, check hydraulic fluid level, clean cooler fins, and check the sensor if the fault persists after cooling. |
| 283 | Air intake filter restriction indicator; the differential-pressure switch has tripped, showing the filter element is restricting airflow. | Clogged or dirty air filter element, a collapsed/leaking intake hose, or a missing or damaged filter seal. | Inspect and service or replace the air filter element, and check the intake hose and seals for damage. |
| 96-03 | Fuel level sender circuit signal outside the expected range; fuel gauge reads inaccurately (pegged full, empty, or fluctuating). | Faulty fuel level sending unit, a corroded connector, or damaged wiring to the gauge/monitoring module. | Verify actual tank level visually, check the sender connector and wiring, and replace the sending unit if the fault persists. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
CB-434D attachments & work tools
Edge cutter / sidecutter kit
A hydraulically actuated edge (side) cutter disc mounts to one end of a drum to trim and square the unrolled asphalt mat edge as the roller passes. Cutter height and offset are cylinder-adjusted, with dedicated relief and control valving and, on some builds, a height-adjust control folded into the propel lever. It bolts to the drum end frame as a factory or dealer-fit arrangement rather than through a universal quick-coupler, since tandem rollers do not swap front-end work tools the way a loader or excavator does.
Drum scraper system
Self-adjusting, spring-loaded scraper blades ride against each drum to clear picked-up asphalt and wear evenly, and are serviced at ground level. Blades retract for transport (roading). A wider scraper set is fitted on the Extra Wide (XW) chassis to match the wider drum.
Water spray system
A drum-mounted spray bar with multiple nozzles wets both drums to stop material pickup, with constant or variable intermittent spray selectable from the operator's station to stretch runtime between tank fills. An inline water filter and tank level gauge protect the circuit. The Extra Wide chassis uses a longer spray bar with more nozzles to cover the wider drum; exact nozzle counts vary by width configuration.
Vibratory / amplitude arrangement
Standard machines run a single-amplitude vibratory system with several selectable amplitude steps at one frequency, roughly 53 Hz (about 3,200 vpm). An optional dual-amplitude arrangement adds a second eccentric-weight housing plus matching vibratory hydraulic and valve group so the operator can switch between a low setting (about 3,200 vpm) and a high setting (about 4,200 vpm) to suit mix type and lift thickness. This is a factory hydraulic/weight-housing option, not a control-panel-only change; exact vpm figures vary by amplitude setting and source.
Operator protection — ROPS/canopy vs enclosed cab
Offered with either an open ROPS canopy station or a fully enclosed, sound-attenuated cab with heater, air conditioning, and front and rear wipers. Cab-equipped machines pair with a suspension seat and instrument console arrangement not used on canopy-only builds.
Drum width configuration — standard vs Extra Wide (XW)
Built in a standard drum width and a wider Extra Wide (XW) chassis variant, with matching wider compactor drum, bumper, drum scraper set, and spray bar carried as a linked arrangement rather than an individual swap. Drum width for this class runs around 1.5 m (59 in); confirm the exact figure for standard versus XW build, since published widths vary by configuration.
Sound suppression / regional certification package
A sound-suppression package (added hood and engine-enclosure insulation and cover panels) is available to meet lower job-site noise limits, and pairs with a separate certification conversion arrangement used for region-specific emissions and noise compliance builds. Both are factory-fit options tied to destination market rather than field-installed kits.
Auxiliary hydraulics for work-tool functions
Edge-cutter and offset-drum functions draw off an auxiliary hydraulic arrangement with their own relief valve and control valve group, separate from the main propel and vibratory circuits. Because there is no universal quick-coupler circuit on this machine type, these functions are ordered as factory arrangements rather than swapped in the field like loader or excavator attachments.
All CB-434D assemblies by section
Every catalogued assembly group for the Caterpillar CB-434D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
244-5996 Air Cleaner Gp -Installation
| 07***08 | Cover, . Ring; Slide | 1 |
| 14***56 | Air Cleaner Group; -Inlet, Exhaust | 1 |
| 1P***86 | Adapter | 1 |
186-5157 Air Cleaner Gp -Installation
141-0056 Air Cleaner Gp -Inlet, Exhaust
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
244-3501 Connection Gp-Inlet
| 11***79 | Gasket | 3 |
| 11***62 | Plate | 3 |
| 23***88 | Gasket-Inlet | 1 |
231-0292 Manifold Gp-Exhaust
| 17***38 | Bolt | 8 |
| 22***36 | Gasket; (Exhaust Manifold) | 1 |
| 23***92 | Manifold Group-Exhaust | 1 |
186-5166 Muffler Gp
| 10***04 | Plate As | 1 |
| 18***66 | Muffler Group | 1 |
| 22***20 | Tube As | 1 |
Basic Engine
233-7236 Camshaft Gp
| 1B***36 | Key-Woodruff | 1 |
| 23***36 | Camshaft Group | 1 |
| 35***46 | Camshaft As | 1 |
230-9151 Cover Gp-Valve Mechanism
| 10***38 | Bolt; (M6x20-mm) | 2 |
| 11***04 | Seal-O-Ring | 1 |
| 13***88 | Cap-Oil Filler; (Engine) | 1 |
232-7400 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 0 |
233-7027 Crankshaft Gp
| 1B***36 | Key-Woodruff | 1 |
| 21***14 | Gear-Crankshaft; (34-Teeth) | 1 |
| 23***00 | Crankshaft Group | 1 |
232-7604 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 06***02 | Dowel | 10 |
| 06***06 | Plug | 1 |
233-7007 Cylinder Block Gp
| 20***19 | Bolt; (M8x1.25x16-mm) | 10 |
| 23***49 | Housing As | 1 |
| 23***04 | Cylinder Block Group | 1 |
232-7519 Cylinder Head Gp
| 06***06 | Plug | 4 |
| 14***79 | Retainer-Valve Spring | 16 |
| 18***82 | Guide-Valve | 8 |
233-7234 Cylinder Head Gp
| 22***01 | Bolt; (M15x1.5x137-mm) | 7 |
| 22***02 | Bolt; (M15x1.5x162-mm) | 3 |
| 23***19 | Cylinder Head Group | 1 |
303-6366 Drain Gp-Engine Oil
| 15***55 | Adapter | 1 |
| 16***73 | Valve Group-Shutoff | 1 |
| 30***66 | Drain Group-Engine Oil | 1 |
7c-4532 Drain Gp-Engine Oil
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
| 7C***32 | Drain Group-Oil Pan; Oil Pan Drain Group | 1 |
231-0055 Drive Gp-Accessory
| 10***73 | Seal-O-Ring | 1 |
| 10***75 | Bearing | 1 |
| 10***76 | Clip | 1 |
186-5160 Drive Gp-Pump
| 0T***24 | Bolt 9.525 mm(.375 In.) Dia. N. C. | 8 |
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 18***60 | Drive Group-Pump | 1 |
230-7286 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 10 |
| 16***89 | Flywheel As | 1 |
206-0314 Guard Gp-Belt -Alternator
| 20***14 | Guard Group-Belt; -Alternator | 1 |
| 21***16 | Guard As | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 3 |
223-7825 Housing Gp-Flywheel
| 10***57 | Plate | 1 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 14***76 | Housing-Flywheel | 1 |
232-6179 Housing Gp-Front
| 06***79 | Dowel | 1 |
| 06***97 | Element Kit, Fuel Filter | 1 |
| 06***00 | Plate-Retaining | 1 |
233-7432 Lifting Gp-Engine
| 10***30 | Bolt; (M10x1.5x20-mm) | 4 |
| 22***48 | Plate-Lifting | 2 |
| 23***32 | Lifting Group-Engine | 1 |
232-6206 Mounting Gp-Engine
| 18***43 | Stud | 4 |
| 23***06 | Mounting Group-Engine | 1 |
| 6H***16 | Plug-Protective | 10 |
186-5165 Mounting Gp-Engine
| 18***65 | Mounting Group-Engine | 1 |
| 19***33 | Mount-Engine | 1 |
| 8T***32 | Nut (M16 X 2 Thd); (M16x2.00 Thd) | 3 |
230-8144 Pan Gp-Oil -Engine
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
| 12***02 | Tube As | 1 |
233-7233 Piston & Rod Gp
| 12***36 | Ring-Retaining | 2 |
| 22***38 | Bushing | 1 |
| 22***39 | Bolt-Special; (Connecting Rod) | 2 |
253-2479 Plug Gp-Engine -Cylinder Block
| 03***63 | Plug | 1 |
| 19***67 | Seal-O-Ring | 1 |
| 23***61 | Plug; (Blanking) | 1 |
225-4317 Plug Gp-Engine
| 22***17 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
232-6204 Plug Gp-Engine
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 23***04 | Plug Group-Engine | 1 |
230-7353 Pulley Gp-Crankshaft
| 23***53 | Pulley Group-Crankshaft | 1 |
| 6I***01 | Block | 1 |
| 6I***02 | Pulley | 1 |
233-7235 Valve Mechanism Gp
| 06***95 | Rod | 8 |
| 13***53 | Tappet | 8 |
| 18***46 | Screw | 2 |
Braking System
187-2892 Lines Gp-Brake & Shift -Propel
| 10***03 | Plate-Cover | 4 |
| 14***76 | Hose As | 2 |
| 14***84 | Elbow As | 2 |
265-5849 Lines Gp-Brake & Shift -Extra Wide
| 15***52 | Union As | 2 |
| 17***15 | Strap; (Dual Clamp) | 4 |
| 26***49 | Lines Group-Brake & Shift; -Extra Wide | 1 |
275-0483 Lines Gp-Brake & Shift -Propel
| 10***03 | Plate-Cover | 4 |
| 15***90 | Bolt-Stacking; (M8x1.25x33-mm) | 1 |
| 15***18 | Clamp-Half | 2 |
267-6554 Lines Gp-Brake & Shift -Power Train
| 14***76 | Hose As | 2 |
| 14***84 | Elbow As | 2 |
| 17***15 | Strap; (Dual Clamp) | 4 |
Cooling System
230-8086 Connection Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 1 |
| 23***86 | Connection Group-Water | 1 |
| 25***68 | Regulator As-Water Temperature; (Connector Included) | 1 |
253-2472 Cooler Gp-Fltr Base & Eng Oil
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 22***18 | Seal | 2 |
| 22***41 | Plug | 1 |
297-0103 Lines Gp-Coolant
| 00***99 | Tee To Bushing | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 11***86 | Cap; (Coolant Tank) | 1 |
297-0104 Lines Gp-Coolant
| 00***99 | Tee To Bushing | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 11***86 | Cap; (Coolant Tank) | 1 |
297-0102 Lines Gp-Coolant
| 00***99 | Tee To Bushing | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 11***86 | Cap; (Coolant Tank) | 1 |
198-3208 Mounting Gp-Rad & Oil Cooler
| 13***96 | Washer; (10.2x39.6x2.3-mm Thk) | 6 |
| 15***24 | Valve Group-Fluid Sampling; (3/8-18 Nptf Thd) | 1 |
| 15***70 | Cap-Dust; (Engine Coolant) | 1 |
230-7355 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 2 |
| 22***38 | Seal-O-Ring | 1 |
187-3598 Radiator & Hyd Oil Cooler Gp
| 03***65 | Cap As-Radiator; (Sea Water Heat Exchanger) | 1 |
| 06***80 | Fitting | 1 |
| 09***79 | Setscrew-Socket | 2 |
198-3372 Recovery Gp-Coolant
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 14***11 | Cap-Vented; (Coolant Recovery) | 1 |
| 14***94 | Recovery Group-Coolant | 1 |
Electrical And Starting System
196-9583 Alternator Gp-Charging -Engine
| 10***13 | Alternator Group-Charging | 1 |
| 11***42 | Strap | 1 |
| 12***28 | Spacer; (11x20x10-mm Thk) | 1 |
105-2813 Alternator Gp-Charging
| 10***13 | Alternator Group-Charging | 1 |
| 11***57 | Pulley-Alternator | 1 |
| 11***59 | Frame As-Alternator | 1 |
190-5580 Battery & Wiring Gp
| 03***05 | Terminal-Cable; (00-Ga, 5/16-In Screw) | 2 |
| 03***25 | Terminal-Ring; (For 3/8" Fastener) | 1 |
| 10***03 | Plate-Cover | 6 |
183-4754 Electrical Ar
| 18***54 | Electrical Ar | 1 |
| 19***80 | Battery & Wiring Group | 1 |
| 19***17 | Warning Group-Backup | 1 |
232-6661 Glow Plug Gp
| 23***26 | Clip | 1 |
| 23***61 | Glow Plug Group | 1 |
| 23***62 | Glow Plug; (12-Volt) | 4 |
3e-7301 Lamp Gp-Dome -With Switch
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 3E***01 | Lamp Group-Dome; -With Switch | 1 |
206-1311 Lamp Gp-Flood
| 20***11 | Lamp Group-Flood | 1 |
| 20***38 | Lamp-Halogen; (12/24-Volt, 35-Watt) | 1 |
| 21***82 | Lens; (Floodlight) | 1 |
9x-9484 Lamp Gp-Flood -Roading Lights
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
9x-7779 Lamp Gp-Flood -Roading Lights
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
| 10***53 | Lens As; (Floodlight) | 1 |
151-2457 Lamp Gp-Head
| 15***57 | Lamp Group-Head; -Floodlight | 1 |
| 17***24 | Lamp; (12-Volt, 55-Watt, Hid)(Warning Beacon Lamp) | 1 |
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
144-9933 Lamp Gp-Panel Illumination -Backlight
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***33 | Lamp Group-Panel Illumination; -Backlight | 1 |
| 18***10 | Lamp; (12-Volt)(Miniature) | 2 |
256-0042 Lamp Gp-Registration Plate
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Lamp; (12-Volt, 5-Watt)(Registration Plate) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
185-7016 Lamp Gp-Warning Beacon -Magnetic Mount
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***16 | Lamp Group-Warning Beacon; -Magnetic Mount | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
219-9883 Lighting Gp-Cab
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 20***38 | Lamp-Halogen; (12/24-Volt, 35-Watt) | 1 |
226-1745 Lighting Gp-Flood -Hid
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Clip | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
289-9149 Lighting Gp-Flood
| 11***18 | Clip | 5 |
| 13***47 | Harness As-Lighting; (Floodlights) | 4 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
265-7350 Lighting Gp-Flood -Cab
| 11***18 | Clip | 4 |
| 13***47 | Harness As-Lighting; (Floodlights) | 4 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
204-4287 Lighting Gp-Flood -High Intensity
| 11***18 | Clip | 1 |
| 15***84 | Clamp-Half | 16 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
236-1796 Lighting Gp-Flood
| 23***96 | Lighting Group-Flood | 1 |
| 6V***44 | Nut - Self Locking (2nd Type) | 4 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
237-0829 Lighting Gp-Roading
| 08***51 | Lamp; (12-Volt, 15-Watt)(Roading Lights) | 4 |
| 09***26 | Lockwasher-Tooth; (M4 Id) | 8 |
| 10***05 | Lamp; (12-Volt, 5-Watt)(Registration Plate) | 4 |
210-0162 Lighting Gp-Warning Beacon -Platform
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 15***84 | Clamp-Half | 4 |
210-0161 Lighting Gp-Warning Beacon -Rops
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***16 | Lamp Group-Warning Beacon; -Magnetic Mount | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
205-5805 Lighting Gp-Warning Beacon -Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***16 | Lamp Group-Warning Beacon; -Magnetic Mount | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
323-6678 Starting Motor Gp-Electric
| 31***39 | Starting Motor Group-Electric | 1 |
| 32***78 | Starting Motor Group-Electric | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
328-6009 Starting Motor Gp-Electric
| 31***39 | Starting Motor Group-Electric | 1 |
| 32***09 | Starting Motor Group-Electric | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
225-8542 Switch Gp-Position -Offset Cylinder
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***75 | Block | 1 |
| 17***24 | Locknut; (M5x0.8-Thd) | 2 |
195-0717 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***18 | Clip | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
283-4450 Wiring Gp-Console
| 15***93 | Screw-Button Head; (M4x0.7x12-mm) | 1 |
| 18***20 | Relay As-Timer; (12-Volt) | 1 |
| 23***92 | Horn | 1 |
291-1829 Wiring Gp-Console
| 13***40 | Resistor As-Connection; (3-Pin) | 1 |
| 17***00 | Suppressor-Arc | 1 |
| 29***94 | Harness As-Console | 1 |
284-9412 Wiring Gp-Console
| 28***74 | Harness As-Platform | 1 |
| 28***75 | Harness As-Rear; (Console) | 1 |
| 28***12 | Wiring Group-Console | 1 |
230-5466 Wiring Gp-Engine
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***14 | Switch As-Pressure; (Oil) | 1 |
226-9307 Wiring Gp-Machine
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***18 | Clip | 5 |
| 13***89 | Clip; (Ladder) | 3 |
265-5806 Wiring Gp-Platform
| 11***90 | Fuse; (10 Amp) | 7 |
| 11***91 | Fuse; (15-Ampere) | 5 |
| 11***92 | Fuse; (20 Amp) | 4 |
202-0030 Wiring Gp-Platform -Console
| 11***90 | Fuse; (10 Amp) | 7 |
| 11***91 | Fuse; (15-Ampere) | 5 |
| 11***92 | Fuse; (20 Amp) | 4 |
300-0531 Wiring Gp-Platform
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***90 | Fuse; (10 Amp) | 7 |
| 11***91 | Fuse; (15-Ampere) | 5 |
291-2596 Wiring Gp-Platform
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
283-2455 Wiring Gp-Rear
| 13***89 | Clip; (Ladder) | 1 |
| 17***15 | Strap; (Dual Clamp) | 6 |
| 18***58 | Suppressor-Arc | 1 |
Engine Arrangement
318-4346 Engine Ar
| 17***89 | Engine Ar-Primary | 1 |
| 18***59 | Installation Ar-Engine | 1 |
| 31***46 | Engine Ar | 1 |
331-0141 Engine Ar
| 18***59 | Installation Ar-Engine | 1 |
| 32***96 | Engine Ar-Primary | 1 |
| 33***41 | Engine Ar | 1 |
318-4347 Engine Ar
| 18***59 | Installation Ar-Engine | 1 |
| 29***49 | Engine Ar-Primary | 1 |
| 31***47 | Engine Ar | 1 |
318-4348 Engine Ar
| 18***59 | Installation Ar-Engine | 1 |
| 30***37 | Engine Ar-Primary | 1 |
| 31***48 | Engine Ar | 1 |
318-4349 Engine Ar
| 18***59 | Installation Ar-Engine | 1 |
| 30***30 | Engine Ar-Primary | 1 |
| 31***49 | Engine Ar | 1 |
309-0730 Engine Ar-Primary
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
| 23***86 | Flywheel Group | 1 |
309-0737 Engine Ar-Primary
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
| 23***86 | Flywheel Group | 1 |
329-2196 Engine Ar-Primary
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
| 23***86 | Flywheel Group | 1 |
297-4049 Engine Ar-Primary
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
| 23***86 | Flywheel Group | 1 |
179-1789 Engine Ar-Primary
| 17***89 | Engine Ar-Primary | 1 |
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
183-4759 Installation Ar-Engine
| 18***59 | Installation Ar-Engine | 1 |
| 18***57 | Air Cleaner Group; -Installation | 1 |
| 18***60 | Drive Group-Pump | 1 |
Frame And Body
270-6907 Bumper Gp -Extra Wide
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 2 |
| 24***02 | Bumper As | 1 |
| 27***07 | Bumper Group; -Extra Wide | 1 |
330-2261 Cover Gp
| 32***87 | Cover As | 1 |
| 33***61 | Cover Group | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 5 |
291-2276 Cover Gp
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
| 13***25 | Bumper | 2 |
| 16***06 | Rod | 1 |
219-4198 Cover Gp
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
| 21***14 | Latch | 2 |
| 21***98 | Cover Group | 1 |
290-9934 Cover Gp-Sound Suppression
| 29***34 | Cover Group-Sound Suppression | 1 |
| 29***35 | Plate | 1 |
| 29***36 | Spacer; (11x19x40-mm Thk) | 2 |
263-4988 Enclosure Gp
| 11***63 | Striker As | 1 |
| 19***18 | Plate | 1 |
| 19***27 | Bracket | 1 |
190-6066 Enclosure Gp-Engine
| 11***63 | Striker As | 1 |
| 19***66 | Enclosure Group-Engine | 1 |
| 19***18 | Plate | 1 |
184-3492 Frame Gp
| 10***06 | Plate As | 2 |
| 18***92 | Frame Group | 1 |
| 19***61 | Support As | 1 |
262-5051 Guard Gp-Bottom
| 25***01 | Plate | 12 |
| 26***51 | Guard Group-Bottom | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 84 |
191-5241 Guard Gp-Bottom -Plate
| 18***84 | Plate | 8 |
| 19***41 | Guard Group-Bottom; -Plate | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 80 |
273-3831 Guard Gp-Lines -Extra Wide
| 26***88 | Guard As-Hose | 2 |
| 27***31 | Guard Group-Lines; -Extra Wide | 1 |
| 3S***64 | Clip-To Harness As On Rh Side Of Engine | 3 |
233-7679 Handrail Gp
| 20***77 | Lever | 2 |
| 22***13 | Handle As | 1 |
| 22***15 | Handle As | 1 |
197-6199 Hitch Ar -Standard
| 19***08 | Lines Group-Steering | 1 |
| 19***99 | Hitch Ar; -Standard | 1 |
| 21***46 | Hitch Group-Articulating | 1 |
196-7293 Hitch Ar -Offset
| 18***92 | Cylinder & Mtg Group-Offset | 1 |
| 18***93 | Lines Group-Steering; -Hitch | 1 |
| 18***94 | Valve & Mtg Group-Control | 1 |
217-6446 Hitch Gp-Articulating
| 21***46 | Hitch Group-Articulating | 1 |
| 23***20 | Hitch As; (Articulated) | 1 |
| 23***65 | Shaft | 1 |
217-6445 Hitch Gp-Articulating -Offset
| 18***46 | Sleeve | 2 |
| 19***84 | Plate | 2 |
| 19***28 | Shaft | 1 |
217-6444 Hitch Gp-Articulating -Chassis
| 07***27 | Screw-Drive; (No.12x12.7-mm) | 2 |
| 18***46 | Sleeve | 2 |
| 19***84 | Plate | 1 |
262-9181 Hood Gp -Latching
| 10***71 | Clevis | 1 |
| 11***49 | Handle As | 1 |
| 14***56 | Pin As | 38 |
198-9151 Hood Gp -Enclosure
| 10***71 | Clevis | 1 |
| 11***49 | Handle As | 1 |
| 19***48 | Bracket; (Latch) | 1 |
258-1545 Mounting Gp-Registration -Italian
| 08***51 | Lamp; (12-Volt, 15-Watt)(Roading Lights) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
267-3712 Panel Gp-Enclosure
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
| 13***25 | Bumper | 2 |
| 21***14 | Latch | 2 |
290-9947 Scraper Gp-Drum
| 09***12 | Spring | 4 |
| 20***94 | Bracket As | 2 |
| 23***88 | Clamp-Half | 8 |
219-4475 Scraper Gp-Drum
| 09***12 | Spring | 4 |
| 17***05 | Plate As | 6 |
| 19***75 | Scraper As | 2 |
262-3931 Scraper Gp-Drum -Extra Wide
| 09***12 | Spring | 8 |
| 20***94 | Bracket As | 2 |
| 23***88 | Clamp-Half | 8 |
222-2775 Support Gp-Hood
| 07***27 | Screw-Drive; (No.12x12.7-mm) | 1 |
| 11***06 | Stud-Ball | 4 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
254-3787 Suppression Gp-Sound
| 11***62 | Washer | 38 |
| 25***87 | Suppression Group-Sound | 1 |
| 25***88 | Insulation-Hood | 1 |
Fuel System
164-4858 Cap Gp-Fuel Filler -Extreme Service, Lockable
| 16***58 | Cap Group-Fuel Filler; -Extreme Service, Lockable | 1 |
| 19***75 | Cover As-Filter; (Fuel Cap) | 1 |
| 9X***00 | Seal-O-Ring | 1 |
197-5332 Control Gp-Governor
| 06***78 | Rod-Control | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 11***18 | Clip | 2 |
186-5163 Lines Gp-Fuel
| 00***64 | End; (Hose) | 2 |
| 10***03 | Plate-Cover | 2 |
| 10***05 | Plate | 1 |
345-3701 Pump Gp-Fuel Injection
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 14***14 | Clip | 1 |
266-3715 Pump Gp-Fuel Injection
| 20***29 | Valve Group-Solenoid; (12-Volt)(Fuel Shutoff) | 1 |
| 26***15 | Pump Group-Fuel Injection | 1 |
267-9413 Pump Gp-Fuel Injection
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 14***14 | Clip | 1 |
233-7425 Pump Gp-Fuel Prm & Prim Filter
| 12***72 | Bolt | 3 |
| 1R***04 | Filter Element-Wtr Sep & Fuel | 1 |
| 20***57 | Seal; (Fuel Filter) | 1 |
299-9265 Pump Gp-Fuel Prm & Prim Filter
| 1R***04 | Filter Element-Wtr Sep & Fuel | 1 |
| 20***57 | Seal; (Fuel Filter) | 1 |
| 22***14 | Bowl As | 1 |
195-5010 Tank & Mtg Gp-Fuel
| 19***10 | Tank Group-Fuel | 1 |
| 19***29 | Strap | 1 |
| 19***10 | Tank & Mtg Group-Fuel | 1 |
194-2510 Tank Gp-Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***40 | Plate As | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
Hydraulic System
187-3292 Cylinder & Mtg Gp-Offset
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
| 11***83 | Connector | 1 |
| 15***32 | Adapter As | 2 |
206-6339 Cylinder Gp-Hydraulic -Steering
| 12***57 | Kit-Seal; (Hydraulic Cylinder)(Serta) | 1 |
| 20***39 | Cylinder Group-Hydraulic; -Steering | 1 |
164-6402 Cylinder Gp-Hydraulic -Steering
| 16***02 | Cylinder Group-Hydraulic; -Steering | 1 |
| 25***87 | Kit-Seal; (Steering Cylinder) | 1 |
204-2135 Cylinder Gp-Hydraulic -Steering
| 20***35 | Cylinder Group-Hydraulic; -Steering | 1 |
| 24***72 | Kit-Seal; (Hydraulic Cylinder)(Texas) | 1 |
| 24***73 | Ring-Retaining | 1 |
206-7017 Cylinder Gp-Hydraulic -Steering
| 20***35 | Cylinder Group-Hydraulic; -Steering | 1 |
| 20***39 | Cylinder Group-Hydraulic; -Steering | 1 |
| 20***17 | Cylinder Group-Hydraulic; -Steering | 1 |
187-3276 Filter & Mtg Gp-Hydraulic
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Tee-Swivel | 1 |
| 14***28 | Connector Assem. | 1 |
192-0717 Filter Gp-Oil -Hydraulic
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 19***17 | Filter Group-Oil; -Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
247-4470 Head Gp-Pump -Vibratory
| 08***72 | Plug-O-Ring | 1 |
| 11***28 | Screw | 2 |
| 12***59 | Bearing-Roller | 1 |
243-2348 Head Gp-Pump -Propel
| 03***39 | Seal-O-Ring (Id=9.25mm) | 1 |
| 08***72 | Plug-O-Ring | 1 |
| 10***20 | Seal-O-Ring | 1 |
276-8437 Head Gp-Pump -Propel
| 08***72 | Plug-O-Ring | 1 |
| 10***20 | Seal-O-Ring | 1 |
| 11***28 | Screw | 2 |
290-7918 Hydraulic Ar -Propel
| 18***94 | Motor & Mtg Group-Propel | 2 |
| 18***98 | Valve & Mtg Group-Control; -Brake | 1 |
| 26***73 | Lines Group-Propel; -Hydraulic | 1 |
282-9671 Hydraulic Ar
| 18***94 | Motor & Mtg Group-Propel | 2 |
| 18***97 | Pump & Mtg Group-Propel | 1 |
| 18***98 | Valve & Mtg Group-Control; -Brake | 1 |
183-4757 Hydraulic Ar-Auxiliary
| 18***57 | Hydraulic Ar-Auxiliary | 1 |
| 18***76 | Filter & Mtg Group-Hydraulic | 1 |
| 18***78 | Lines Group-Filter | 1 |
187-3665 Lines Gp-Auxiliary Hydraulic
| 17***15 | Strap; (Dual Clamp) | 3 |
| 18***65 | Lines Group-Auxiliary Hydraulic | 1 |
| 1P***74 | Flange-Half | 2 |
187-3278 Lines Gp-Filter
| 10***05 | Plate | 1 |
| 10***43 | Hose As | 1 |
| 11***36 | Hose As | 1 |
187-3279 Lines Gp-Hydraulic Oil Cooler
| 13***18 | Hose As | 1 |
| 18***79 | Lines Group-Hydraulic Oil Cooler | 1 |
| 19***90 | Hose As | 1 |
224-4874 Motor Gp-Gear -Hydraulic Fan-Radiator
| 20***41 | Kit-Seal; (Relief Valve) | 1 |
| 22***74 | Motor Group-Gear; -Hydraulic Fan-Radiator | 1 |
| 24***87 | Kit-Seal; (Hydraulic Fan Motor) | 1 |
255-0109 Motor Gp-Gear -Hydraulic Fan-Radiator
| 25***09 | Motor Group-Gear; -Hydraulic Fan-Radiator | 1 |
| 26***92 | Kit-Seal; (Hydraulic Fan Motor) | 1 |
187-3095 Motor Gp-Piston -Vibratory
| 12***94 | Plug; (Break Off) | 1 |
| 12***17 | Bearing | 1 |
| 18***26 | Bolt-Socket Head; (M12x1.75x30-mm) | 4 |
263-6122 Motor Gp-Piston -Propel
| 10***00 | Ring-Retaining | 2 |
| 13***07 | Bearing As-Tapered Roller | 1 |
| 14***55 | Roller | 10 |
187-2899 Motor Gp-Piston -Propel
| 10***00 | Ring-Retaining | 2 |
| 13***07 | Bearing As-Tapered Roller | 1 |
| 14***55 | Roller | 10 |
187-3282 Pump Gp-Gear -Steering
| 18***82 | Pump Group-Gear; -Steering | 1 |
| 24***23 | Kit-Repair; (Steering Pump) | 1 |
| 24***67 | Kit-Valve; (Flow Divider)(Steering Gear Pump) | 1 |
255-0108 Pump Gp-Gear -Steering
| 24***67 | Kit-Valve; (Flow Divider)(Steering Gear Pump) | 1 |
| 25***08 | Pump Group-Gear; -Steering | 1 |
| 26***71 | Kit-Seal; (Steering Gear Pump) | 1 |
187-3098 Pump Gp-Piston -Vibratory
| 11***28 | Screw | 3 |
| 16***05 | Pin | 2 |
| 17***58 | Ring-Seal | 2 |
285-3597 Pump Gp-Piston -Propel
| 11***28 | Screw | 4 |
| 11***73 | Seal-O-Ring | 2 |
| 12***74 | Screw-Lock | 3 |
269-3125 Pump Gp-Piston -Propel
| 11***28 | Screw | 4 |
| 11***73 | Seal-O-Ring | 2 |
| 12***74 | Screw-Lock | 3 |
194-1539 Pump Gp-Piston -Vibratory
| 11***28 | Screw | 3 |
| 16***58 | Ring | 2 |
| 16***05 | Pin | 2 |
187-2900 Pump Gp-Piston -Propel, Hydraulic
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 11***28 | Screw | 4 |
| 11***73 | Seal-O-Ring | 2 |
269-7186 Pump Gp-Piston
| 11***28 | Screw | 3 |
| 16***05 | Pin | 2 |
| 17***58 | Ring-Seal | 2 |
280-3454 Pump Gp-Piston -Propel
| 11***28 | Screw | 4 |
| 11***73 | Seal-O-Ring | 2 |
| 12***74 | Screw-Lock | 3 |
251-1687 Rotating Gp-Motor -Vibratory
| 10***65 | Seal-Shaft | 1 |
| 11***63 | Roller-Bearing | 1 |
| 11***65 | Ring-Retaining | 1 |
276-8206 Rotating Gp-Pump -Propel
| 10***65 | Circlip | 1 |
| 11***51 | Bearing | 1 |
| 19***83 | Seal-Shaft | 1 |
247-4469 Rotating Gp-Pump -Vibratory
| 08***98 | Bearing | 1 |
| 10***65 | Circlip | 1 |
| 19***63 | Kit-Pump; (Rotating) | 1 |
212-4487 Rotating Gp-Pump -Piston
| 10***65 | Circlip | 1 |
| 11***51 | Bearing | 1 |
| 11***52 | Cage | 1 |
195-5012 Tank & Mtg Gp-Hydraulic
| 00***14 | Coupling-Pipe | 1 |
| 14***46 | Insert-Nylon | 1 |
| 17***86 | Breather; (Governor) | 1 |
262-2820 Tank Gp-Hydraulic -Chassis
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***14 | Seal-O-Ring (Id=9.80mm) | 4 |
| 09***17 | Seal-O-Ring (Id=13.80mm) | 4 |
190-5167 Tank Gp-Hydraulic -Chassis
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***14 | Seal-O-Ring (Id=9.80mm) | 4 |
| 09***17 | Seal-O-Ring (Id=13.80mm) | 4 |
283-1159 Valve & Mtg Gp-Auxiliary
| 11***18 | Clip | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 23***55 | Hose As | 1 |
187-3669 Valve & Mtg Gp-Bypass -Hydraulic Oil Cooler
| 14***18 | Connector As | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
187-3294 Valve & Mtg Gp-Control
| 14***19 | Connector As | 1 |
| 14***25 | Connector As. | 2 |
| 14***72 | Elbow Group | 2 |
187-2898 Valve & Mtg Gp-Control -Brake
| 08***35 | Tee | 1 |
| 14***65 | Elbow | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
230-6226 Valve & Mtg Gp-Relief -Sidecutter
| 11***16 | Kit-Seal; (Counterbalance Valve) | 1 |
| 14***25 | Connector As. | 2 |
| 14***68 | Elbow Group | 2 |
259-1876 Valve & Mtg Gp-Sidecutter
| 14***19 | Connector As | 1 |
| 14***25 | Connector As. | 1 |
| 14***51 | Elbow Group | 1 |
279-6525 Valve & Mtg Gp-Solenoid -Auxiliary
| 24***81 | Flange | 1 |
| 27***66 | Manifold | 1 |
| 27***23 | Valve Group-Solenoid; -Auxiliary | 1 |
162-2453 Valve Gp-Bypass -Hydraulic Oil Cooler
| 12***34 | Valve Group-Bypass; (Hydraulic Oil Cooler) | 1 |
| 16***53 | Valve Group-Bypass; -Hydraulic Oil Cooler | 1 |
| 19***64 | Body-Valve | 1 |
205-7186 Valve Gp-Control -Offset Drum
| 12***56 | Cap | 1 |
| 20***86 | Valve Group-Control; -Offset Drum | 1 |
| 24***34 | Kit-Seal; (Sidecutter Valve) | 1 |
243-2953 Valve Gp-Flushing -Propel Pump
| 10***17 | Seal-O-Ring | 2 |
| 24***53 | Valve Group-Flushing; -Propel Pump | 1 |
| 4J***67 | Packing,Preformed; Tube To Cylinder Uoc:Bsv,Bsx | 2 |
237-9603 Valve Gp-Pump Control -Pressure-Vibratory
| 03***43 | Seal-O-Ring | 2 |
| 20***48 | Solenoid | 1 |
| 20***65 | Seal | 1 |
275-4106 Valve Gp-Pump Control -Piston
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 16***57 | Plug | 2 |
| 19***50 | Spacer | 2 |
290-0724 Valve Gp-Pump Control -Propel
| 19***53 | Gasket | 1 |
| 19***45 | Bolt-Socket Head; (M6x1x45-mm) | 1 |
| 20***35 | Pin | 2 |
215-7328 Valve Gp-Pump Control -Propel
| 19***50 | Spacer | 2 |
| 19***51 | Cover | 1 |
| 19***52 | Spring | 1 |
215-6861 Valve Gp-Relief -Piston
| 11***14 | Spring | 1 |
| 12***34 | Ring-Backup | 1 |
| 17***25 | Pin-Threaded | 1 |
152-1811 Valve Gp-Relief -Pressure Override
| 12***63 | Kit-Seal; (Contains Parts Marked J) | 1 |
| 15***11 | Valve Group-Relief; -Pressure Override-Hydrostatic Pump | 1 |
| 6E***07 | Locknut-Sealing | 1 |
209-6806 Valve Gp-Sidecutter
| 20***06 | Valve Group-Sidecutter | 1 |
| 24***34 | Kit-Seal; (Sidecutter Valve) | 1 |
| 24***35 | Kit-Seal; (Sidecutter Valve) | 1 |
294-8638 Valve Gp-Solenoid -Basic
| 03***43 | Seal-O-Ring | 2 |
| 20***48 | Solenoid | 1 |
| 20***65 | Seal | 1 |
279-6523 Valve Gp-Solenoid -Auxiliary
| 24***81 | Flange | 1 |
| 24***12 | Kit-Seal; (Solenoid Valve) | 1 |
| 27***23 | Valve Group-Solenoid; -Auxiliary | 1 |
187-2975 Valve Gp-Solenoid -Solenoid Valve
| 18***75 | Valve Group-Solenoid; -Solenoid Valve | 1 |
| 21***13 | Seal-O-Ring | 1 |
| 24***52 | Kit-Seal; (Brake Valve) | 1 |
Implements
260-0726 Sidecutter Ar -Edge
| 23***26 | Valve & Mtg Group-Relief; -Sidecutter | 1 |
| 23***37 | Panel Group-Control; -Sidecutter | 1 |
| 25***87 | Sidecutter Group; -Offset | 1 |
273-2560 Sidecutter Ar -Edge
| 23***26 | Valve & Mtg Group-Relief; -Sidecutter | 1 |
| 23***37 | Panel Group-Control; -Sidecutter | 1 |
| 25***76 | Valve & Mtg Group-Sidecutter | 1 |
258-6687 Sidecutter Gp -Offset
| 10***03 | Plate-Cover | 4 |
| 12***07 | Roller As | 1 |
| 12***08 | Disc-Cutter | 1 |
273-2558 Sidecutter Gp -Offset
| 10***03 | Plate-Cover | 4 |
| 12***07 | Roller As | 1 |
| 12***08 | Disc-Cutter | 1 |
256-9769 Sidecutter Gp
| 08***11 | Plug; (Grease) | 2 |
| 13***86 | Nut | 2 |
| 13***87 | Washer | 2 |
Lubrication System
232-7378 Filter Gp-Engine Oil
| 23***78 | Filter Group-Engine Oil | 1 |
| 7W***26 | Filter As-Engine Oil | 1 |
230-7578 Pump Gp-Engine Oil
| 10***61 | Bolt; (M10x1.50x50-mm) | 5 |
| 22***29 | Pump As-Engine Oil | 1 |
| 23***78 | Pump Group-Engine Oil | 1 |
205-8479 Valve Gp-Fluid Sampling
| 16***90 | Valve As-Fluid Sampling; (Coolant) | 1 |
| 20***79 | Valve Group-Fluid Sampling; -Engine Oil | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
Machine Arrangement
270-4432 Chassis Ar
| 18***92 | Frame Group | 1 |
| 19***10 | Tank & Mtg Group-Fuel | 1 |
| 19***12 | Tank & Mtg Group-Hydraulic | 1 |
183-4753 Chassis Ar
| 18***53 | Chassis Ar | 1 |
| 18***92 | Frame Group | 1 |
| 19***66 | Enclosure Group-Engine | 1 |
183-4752 Common Ar
| 17***89 | Engine Ar-Primary | 1 |
| 18***52 | Common Ar | 1 |
| 18***53 | Chassis Ar | 1 |
318-4329 Common Ar
| 18***54 | Electrical Ar | 1 |
| 18***57 | Hydraulic Ar-Auxiliary | 1 |
| 27***32 | Chassis Ar | 1 |
272-6511 Common Ar
| 17***89 | Engine Ar-Primary | 1 |
| 18***54 | Electrical Ar | 1 |
| 18***57 | Hydraulic Ar-Auxiliary | 1 |
254-3869 Conversion Ar-Certification
| 23***80 | Plate & Film Group; -Certification | 1 |
| 25***87 | Suppression Group-Sound | 1 |
| 25***69 | Conversion Ar-Certification | 1 |
Operator Station
249-7136 Air Conditioner Gp -Cab
| 20***21 | Resistor As | 1 |
| 20***98 | Knob-Control; (Temperature Select) | 3 |
| 24***59 | Cable As | 2 |
239-3473 Arm Gp-Window Wiper -Rear
| 13***89 | Clip | 3 |
| 19***71 | Hose; (116-cm) | 0 |
| 22***51 | Nozzle As | 1 |
255-6293 Arm Gp-Window Wiper -Front
| 19***71 | Hose; (116-cm) | 0 |
| 22***28 | Nozzle As | 1 |
| 25***93 | Arm Group-Window Wiper; -Front | 1 |
268-5472 Cab Ar
| 19***62 | Seat Group-Suspension; -Cloth | 1 |
| 21***19 | Cab Group | 1 |
| 21***21 | Floor Mat Group-Cab | 1 |
211-2319 Cab Gp
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 4 |
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 3 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
216-7861 Console Gp-Instrument
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***38 | Knob-Control | 1 |
| 11***60 | Kit-Service Meter; (Panel) | 1 |
266-0348 Console Gp-Instrument
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 3 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
215-3651 Console Gp-Operator -Side
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***18 | Clip | 1 |
| 11***59 | Base | 1 |
266-0331 Console Gp-Operator -Side
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***18 | Clip | 2 |
| 11***59 | Base | 1 |
266-0274 Control Gp-Direction & Speed
| 11***18 | Clip | 1 |
| 21***43 | Film; (Direction And Speed Control) | 1 |
| 26***74 | Control Group-Direction & Speed | 1 |
190-4204 Control Gp-Direction & Speed -Electronic
| 19***04 | Control Group-Direction & Speed; -Electronic | 1 |
| 21***43 | Film; (Direction And Speed Control) | 1 |
| 26***64 | Control Group-Handle; -Direction, Speed | 1 |
291-6663 Control Gp-Direction & Speed
| 11***18 | Clip | 1 |
| 21***43 | Film; (Direction And Speed Control) | 1 |
| 26***10 | Plate As-Cover | 1 |
285-3596 Control Gp-Direction & Speed
| 11***18 | Clip | 1 |
| 21***43 | Film; (Direction And Speed Control) | 1 |
| 26***10 | Plate As-Cover | 1 |
262-7164 Control Gp-Handle -Direction, Speed
| 03***43 | Nut; (5/16-18 Thd) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***74 | Washer; (5.2x11.2x1.6-mm Thk)(5.2x11.2x1.5mm Thk) | 4 |
284-0971 Control Gp-Handle
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***84 | Tube-Heat Shrink; (3.2-mm Dia)(6.5-cm Each) | 0 |
| 23***82 | Screw-Flat Head; (4-40x12.7-mm) | 1 |
285-3590 Control Gp-Handle -Direction, Speed
| 03***43 | Nut; (5/16-18 Thd) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***84 | Tube-Heat Shrink; (3.2-mm Dia)(6.5-cm Each) | 0 |
234-9723 Control Gp-Handle
| 03***43 | Nut; (5/16-18 Thd) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***74 | Washer; (5.2x11.2x1.6-mm Thk)(5.2x11.2x1.5mm Thk) | 4 |
214-0631 Control Gp-Speed -Direction
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 13***09 | Tube-Heat Shrink; (32-mm Dia)(16-cm) | 0 |
266-2405 Control Gp-Speed
| 26***05 | Control Group-Speed | 1 |
| 27***84 | Potentiometer As; (Conveyor Control, Rh) | 1 |
| 31***17 | Knob As; (Potentiometer) | 1 |
197-5581 Floor Mat Gp
| 19***86 | Floor Mat; (Lh) | 1 |
| 19***87 | Floor Mat; (Rh) | 1 |
| 19***88 | Floor Mat-Rear | 1 |
211-2321 Floor Mat Gp-Cab
| 19***90 | Floor Mat | 2 |
| 20***40 | Floor Mat-Rear | 1 |
| 20***41 | Floor Mat-Front | 1 |
205-5249 Gauge Gp-Vibratory -Vpm
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***80 | Sensor As-Speed; (Engine) | 2 |
190-4199 Guard Gp-Vandalism
| 15***93 | Screw-Button Head; (M4x0.7x12-mm) | 4 |
| 19***99 | Guard Group-Vandalism | 1 |
| 20***63 | Cover | 1 |
221-4467 Lines Gp-Cab Heater
| 10***05 | Plate | 3 |
| 15***16 | Clamp-Half | 7 |
| 17***15 | Strap; (Dual Clamp) | 5 |
190-4201 Lock Gp-Rotation
| 10***76 | Clamp-Half | 4 |
| 17***15 | Bearing | 2 |
| 17***28 | Knob | 1 |
267-8553 Mirror Gp-Rear View -Interior
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 16***52 | Mirror | 2 |
| 26***29 | Bracket | 2 |
230-7282 Mirror Gp-Rear View -Exterior
| 11***90 | Washer; (11.1x37.9x3.3-mm Thk) | 2 |
| 13***83 | Mirror-Convex | 2 |
| 13***09 | Bracket As-Mirror | 1 |
210-5940 Module Gp-Speed & Vibratory
| 08***37 | Nut | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
260-9322 Module Gp-Speed & Vibratory
| 00***73 | Terminal (To Horns) | 1 |
| 08***37 | Nut | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
223-6539 Module Gp-Warning Indicator -With Alarm
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 10 |
| 22***39 | Module Group-Warning Indicator; -With Alarm | 1 |
144-9930 Module Gp-Warning Indicator -With Alarm, Function Lights
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***30 | Module Group-Warning Indicator; -With Alarm, Function Lights | 1 |
| 14***34 | Gasket; (Indicator Module) | 1 |
330-5061 Motor Gp-Window Wiper
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 19***10 | Cap-Wiper | 2 |
330-5029 Motor Gp-Window Wiper -Rear
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 26***23 | Cap-Wiper | 1 |
239-3475 Motor Gp-Window Wiper
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 19***10 | Cap-Wiper | 2 |
239-3474 Motor Gp-Window Wiper
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 23***74 | Motor Group-Window Wiper | 1 |
234-2021 Mounting Gp-Cab
| 09***10 | Setscrew-Socket; (M14x2x14-mm) | 4 |
| 23***21 | Mounting Group-Cab | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 2 |
190-4209 Mounting Gp-Platform
| 15***41 | Mount As | 2 |
| 19***09 | Mounting Group-Platform | 1 |
| 3E***83 | Sleeve | 2 |
190-4208 Mounting Gp-Platform -Operator
| 15***41 | Mount As | 2 |
| 19***08 | Mounting Group-Platform; -Operator | 1 |
| 3E***83 | Sleeve | 2 |
350-3502 Operator Ar
| 15***80 | Steering Wheel Group | 1 |
| 18***00 | Control Group-Steering | 1 |
| 19***01 | Lock Group-Rotation | 1 |
190-4192 Operator Ar -Basic
| 15***80 | Steering Wheel Group | 1 |
| 18***00 | Control Group-Steering | 1 |
| 19***92 | Operator Ar; -Basic | 1 |
268-5473 Operator Ar -Italian Roading
| 19***99 | Guard Group-Vandalism | 1 |
| 19***03 | Platform Group-Operator | 1 |
| 19***08 | Mounting Group-Platform; -Operator | 1 |
268-4742 Operator Ar -Italian Roading
| 15***80 | Steering Wheel Group | 1 |
| 18***00 | Control Group-Steering | 1 |
| 19***01 | Lock Group-Rotation | 1 |
268-5476 Operator Ar -Italian Roading
| 19***99 | Guard Group-Vandalism | 1 |
| 19***03 | Platform Group-Operator | 1 |
| 19***09 | Mounting Group-Platform | 1 |
190-4191 Operator Ar -Open
| 19***91 | Operator Ar; -Open | 1 |
| 19***92 | Operator Ar; -Basic | 1 |
| 19***99 | Guard Group-Vandalism | 1 |
190-4193 Operator Ar-Open Rops
| 19***92 | Operator Ar; -Basic | 1 |
| 19***93 | Operator Ar-Open Rops | 1 |
| 19***99 | Guard Group-Vandalism | 1 |
231-3537 Panel Gp-Control -Sidecutter
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 11***15 | Grommet | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
213-9092 Platform Gp-Operator -Steering
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 15***69 | Knob Group-Steering | 1 |
| 19***92 | Indicator As; (Water Level) | 1 |
190-4203 Platform Gp-Operator
| 14***64 | Seal; (142-cm) | 0 |
| 18***82 | Platform As | 1 |
| 18***85 | Cover | 2 |
237-2721 Platform Gp-Operator -Cab
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 10 |
| 19***96 | Plate | 2 |
| 20***96 | Support As | 2 |
190-4206 Platform Gp-Slide
| 16***26 | Ball Bearing | 8 |
| 18***72 | Bearing-Pivot | 1 |
| 19***06 | Platform Group-Slide | 1 |
218-2815 Rops Gp
| 21***15 | Rops Group | 1 |
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
| 23***15 | Rops As | 1 |
322-7608 Seat Gp-Suspension -Vinyl
| 23***30 | Cover-Seat; (Back, Vinyl) | 1 |
| 23***32 | Cover-Seat; (Bottom, Vinyl) | 1 |
| 23***33 | Foam-Seat; (Bottom) | 1 |
191-6162 Seat Gp-Suspension -Cloth
| 19***61 | Seat Group-Suspension; -Fabric | 1 |
| 19***62 | Seat Group-Suspension; -Cloth | 1 |
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 1 |
191-5350 Seat Gp-Suspension -Vinyl
| 19***50 | Seat Group-Suspension; -Vinyl | 1 |
| 23***30 | Cover-Seat; (Back, Vinyl) | 1 |
| 23***32 | Cover-Seat; (Bottom, Vinyl) | 1 |
191-5351 Seat Gp-Suspension -Vinyl-Literature Lanyard
| 19***50 | Seat Group-Suspension; -Vinyl | 1 |
| 19***51 | Seat Group-Suspension; -Vinyl-Literature Lanyard | 1 |
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 1 |
191-6161 Seat Gp-Suspension -Cloth
| 19***61 | Seat Group-Suspension; -Fabric | 1 |
| 23***33 | Foam-Seat; (Bottom) | 1 |
| 23***37 | Armrest; (Lh) | 1 |
321-9752 Seat Gp-Suspension -Cloth
| 23***33 | Foam-Seat; (Bottom) | 1 |
| 23***37 | Armrest; (Lh) | 1 |
| 23***38 | Armrest; (Rh) | 1 |
231-3436 Speedometer Gp
| 11***48 | Lamp; (24-Volt, 3-Watt)(Clear)(Fuel Level Gauge) | 1 |
| 13***24 | Seal | 1 |
| 16***11 | Plug | 1 |
254-0162 Tank Gp-Window Washer
| 15***77 | Reservoir | 1 |
| 25***62 | Tank Group-Window Washer | 1 |
| 25***58 | Pump As-Washer; (Windshield) | 2 |
243-2456 Visor Gp-Cab
| 13***06 | Visor As-Window | 1 |
| 23***71 | Bushing | 4 |
| 24***56 | Visor Group-Cab | 1 |
Power Train
262-4451 Drum Gp-Compactor -Extra Wide
| 22***72 | Mount | 12 |
| 25***99 | Plate | 1 |
| 25***00 | Plate | 1 |
185-3498 Drum Gp-Smooth
| 18***55 | Plate | 1 |
| 18***98 | Drum Group-Smooth | 1 |
| 18***99 | Drum As | 1 |
275-0482 Hydraulic Ar-Propel
| 18***94 | Motor & Mtg Group-Propel | 2 |
| 18***97 | Pump & Mtg Group-Propel | 1 |
| 18***98 | Valve & Mtg Group-Control; -Brake | 1 |
183-4756 Hydraulic Ar-Propel
| 18***56 | Hydraulic Ar-Propel | 1 |
| 18***92 | Lines Group-Brake & Shift; -Propel | 1 |
| 18***93 | Lines Group-Propel; -Hydraulic | 1 |
280-3460 Hydraulic Ar-Propel -Italy
| 18***94 | Motor & Mtg Group-Propel | 2 |
| 18***98 | Valve & Mtg Group-Control; -Brake | 1 |
| 26***73 | Lines Group-Propel; -Hydraulic | 1 |
262-9110 Installation Gp-Drum
| 26***10 | Installation Group-Drum | 1 |
| 27***31 | Plate | 4 |
| 27***32 | Plate | 4 |
302-5207 Kit-Repair
| 17***00 | Suppressor-Arc | 1 |
| 29***24 | Valve Group-Pump Control; -Propel | 1 |
| 29***57 | Harness As-Switch | 1 |
187-2893 Lines Gp-Propel -Hydraulic
| 10***49 | Plate | 3 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 4 |
| 14***52 | Union As | 2 |
275-0484 Lines Gp-Propel -Hydraulic
| 10***49 | Plate | 3 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 4 |
267-6673 Lines Gp-Propel -Hydraulic
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 4 |
| 14***55 | Union As | 4 |
| 14***52 | Union As | 2 |
265-5848 Lines Gp-Propel -Power Train
| 14***55 | Union As | 4 |
| 14***52 | Union As | 2 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 4 |
187-2894 Motor & Mtg Gp-Propel
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 1 |
| 15***41 | Elbow As. | 1 |
| 16***08 | Connector Group | 1 |
185-3497 Power Train Ar
| 18***97 | Power Train Ar | 1 |
| 18***98 | Drum Group-Smooth | 2 |
| 18***16 | Support Group-Motor; -Propel | 2 |
280-3462 Power Train Ar
| 18***98 | Drum Group-Smooth | 2 |
| 18***74 | Cylinder & Mtg Group-Steering | 1 |
| 18***16 | Support Group-Motor; -Propel | 2 |
285-3832 Power Train Ar
| 18***98 | Drum Group-Smooth | 2 |
| 18***74 | Cylinder & Mtg Group-Steering | 1 |
| 18***16 | Support Group-Motor; -Propel | 2 |
271-8527 Power Train Ar -Extra Wide
| 26***31 | Scraper Group-Drum; -Extra Wide | 2 |
| 26***51 | Drum Group-Compactor; -Extra Wide | 2 |
| 26***10 | Installation Group-Drum | 1 |
271-8526 Power Train Ar
| 18***98 | Drum Group-Smooth | 2 |
| 18***74 | Cylinder & Mtg Group-Steering | 1 |
| 18***16 | Support Group-Motor; -Propel | 2 |
187-2897 Pump & Mtg Gp-Propel
| 11***01 | Orifice | 2 |
| 12***01 | Hub As-Coupling; (Propel Pump) | 1 |
| 14***81 | Elbow Group | 1 |
280-3458 Pump & Mtg Gp-Propel
| 12***01 | Hub As-Coupling; (Propel Pump) | 1 |
| 14***81 | Elbow Group | 1 |
| 14***28 | Tee As-Orfs | 1 |
285-3592 Pump & Mtg Gp-Propel
| 12***01 | Hub As-Coupling; (Propel Pump) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***81 | Elbow Group | 1 |
270-9268 Shaft Gp-Drive
| 11***02 | Shaft-Drive; (Eccentric Weight) | 1 |
| 1G***27 | Indicator-Blade | 1 |
| 20***90 | Coupling | 1 |
270-8684 Shaft Gp-Drive
| 19***45 | Shaft Group-Drive | 1 |
| 1G***27 | Indicator-Blade | 1 |
| 20***90 | Coupling | 1 |
190-9845 Shaft Gp-Drive
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 11***80 | Kit-Dust Cap; (Drive Shaft)(Drive Shaft) | 1 |
| 12***45 | Kit-Universal Joint; (Drive Shaft) | 2 |
189-6317 Support Gp-Motor -Vibratory
| 18***22 | Bearing As; (Drum) | 1 |
| 18***17 | Support Group-Motor; -Vibratory | 1 |
| 19***70 | Support | 1 |
270-8393 Support Gp-Motor -Extra Wide
| 19***03 | Support | 1 |
| 21***20 | Cover | 1 |
| 27***93 | Support Group-Motor; -Extra Wide | 1 |
270-8394 Support Gp-Motor
| 18***22 | Bearing As; (Drum) | 1 |
| 19***70 | Support | 1 |
| 21***19 | Cover | 1 |
189-6316 Support Gp-Motor -Propel
| 18***16 | Support Group-Motor; -Propel | 1 |
| 19***03 | Support | 1 |
| 21***20 | Cover | 1 |
Service Equipment And Supplies
267-3485 Film Gp -Cb-434d
| 26***85 | Film Group; -Cb-434d | 1 |
| 29***65 | Film-Identification; (Caterpillar) | 2 |
| 30***65 | Film-Identification; (Cb434d) | 2 |
308-0818 Film Gp
| 30***69 | Film-Identification; (Cat, Lh)(Lh-Cat) | 1 |
| 30***70 | Film-Identification; (Cat, Rh)(Rh-Cat) | 1 |
| 30***18 | Rocker Lever Assembly, Rocker Lever, Film Group | 1 |
231-3811 Film Gp -Round Red Reflective
| 19***86 | Film; (Safety) (To Right And Left Of Fuel Tank) | 2 |
| 23***11 | Film Group; -Round Red Reflective | 1 |
308-0817 Film Gp -Cab
| 30***71 | Film-Identification; (Cat, Lh) | 1 |
| 30***72 | Film-Identification; (Cat, Rh) | 1 |
| 30***17 | Film Group; -Cab | 1 |
294-0582 Film Gp
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***04 | Film; (Variable Speed Control) | 1 |
| 22***45 | Film-Warning; (Seat Belt, International) | 1 |
267-3487 Film Gp
| 26***87 | Film Group | 1 |
| 29***65 | Film-Identification; (Caterpillar) | 2 |
| 30***65 | Film-Identification; (Cb434d) | 2 |
208-3546 Plate & Film Gp -English
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 20***46 | Plate & Film Group; -English | 1 |
| 21***03 | Film; (Variable Speed Control) | 1 |
192-8835 Plate & Film Gp -Chassis
| 12***10 | Film-Stripe; (165-cm Each) | 0 |
| 15***97 | Film-Identification; (Water For Water Spray) | 1 |
| 15***33 | Film-Identification; (12-Volt) | 1 |
270-4233 Plate & Film Gp -Body
| 12***10 | Film-Stripe; (165-cm Each) | 0 |
| 15***97 | Film-Identification; (Water For Water Spray) | 1 |
| 15***33 | Film-Identification; (12-Volt) | 1 |
208-3549 Plate & Film Gp -Portuguese
| 16***99 | Plate-Warning; (Read Operation Manual) | 1 |
| 20***49 | Plate & Film Group; -Portuguese | 1 |
| 21***31 | Film-Notice; (Engine Starting) | 1 |
208-3550 Plate & Film Gp -Spanish
| 16***75 | Plate-Warning; (Read Operation Manual) | 1 |
| 20***50 | Plate & Film Group; -Spanish | 1 |
| 21***32 | Film-Notice; (Engine Starting) | 1 |
239-7180 Plate & Film Gp -Certification
| 17***41 | Film-Caution; (Lift Eye, Tie-Down Location) | 1 |
| 20***37 | Film; (Exterior) | 1 |
| 23***80 | Plate & Film Group; -Certification | 1 |
208-3548 Plate & Film Gp -German
| 16***00 | Plate-Warning; (Read Operation Manual) | 1 |
| 20***48 | Plate & Film Group; -German | 1 |
| 21***30 | Film-Notice; (Engine Starting) | 1 |
208-3547 Plate & Film Gp -French
| 16***74 | Plate-Warning; (Read Operation Manual) | 1 |
| 20***47 | Plate & Film Group; -French | 1 |
| 21***29 | Film-Notice; (Engine Starting) | 1 |
Steering System
187-3300 Control Gp-Steering
| 14***63 | Elbow Group | 2 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
| 14***74 | Elbow As | 2 |
297-1018 Cylinder & Mtg Gp-Steering
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
| 12***57 | Kit-Seal; (Hydraulic Cylinder)(Serta) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
187-3274 Cylinder & Mtg Gp-Steering
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
153-7369 Knob Gp-Steering
| 15***69 | Knob Group-Steering | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 1 |
344-6191 Lines Gp-Steering
| 10***05 | Plate | 1 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 3 |
| 14***75 | Elbow Group | 2 |
187-3280 Lines Gp-Steering -Auxiliary
| 10***05 | Plate | 2 |
| 10***06 | Plate As | 1 |
| 13***70 | Hose Assem. | 1 |
187-3293 Lines Gp-Steering -Hitch
| 10***03 | Plate-Cover | 3 |
| 10***49 | Plate | 1 |
| 13***65 | Hose As | 1 |
202-0028 Lines Gp-Steering -Operator
| 10***05 | Plate | 1 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 2 |
| 14***75 | Elbow Group | 2 |
195-0708 Lines Gp-Steering
| 19***08 | Lines Group-Steering | 1 |
| 1P***74 | Flange-Half | 2 |
| 22***50 | Hose As | 1 |
187-3281 Pump & Mtg Gp-Steering -Auxiliary
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 1 |
| 14***25 | Connector As. | 1 |
| 14***28 | Connector Assem. | 1 |
187-3299 Pump Gp-Metering -Hmu
| 18***99 | Pump Group-Metering; -Hmu | 1 |
| 24***67 | Kit-Seal; (Steering Pump) | 1 |
280-6841 Steering Column Gp
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 21***55 | Kit-Tilt Lever; (Steering Column) | 1 |
| 28***41 | Steering Column Group | 1 |
153-9580 Steering Wheel Gp
| 14***91 | Steering Wheel As | 1 |
| 15***68 | Plug | 1 |
| 15***80 | Steering Wheel Group | 1 |
Vibratory System
270-8588 Housing Gp-Eccentric Weight
| 08***47 | Key-Woodruff | 1 |
| 18***02 | Fan; (Eccentric Weight) | 1 |
| 20***09 | Lever | 1 |
223-5394 Housing Gp-Eccentric Weight -5-Ampere
| 08***47 | Key-Woodruff | 1 |
| 11***02 | Shaft-Drive; (Eccentric Weight) | 1 |
| 18***02 | Fan; (Eccentric Weight) | 1 |
283-9282 Housing Gp-Eccentric Weight
| 18***02 | Fan; (Eccentric Weight) | 1 |
| 22***21 | Hub-Coupling | 1 |
| 28***81 | Weight Group-Eccentric | 1 |
186-4927 Housing Gp-Eccentric Weight -2-Ampere
| 11***02 | Shaft-Drive; (Eccentric Weight) | 1 |
| 18***02 | Fan; (Eccentric Weight) | 1 |
| 18***27 | Housing Group-Eccentric Weight; -2-Ampere | 1 |
270-8586 Housing Gp-Eccentric Weight
| 18***02 | Fan; (Eccentric Weight) | 1 |
| 18***30 | Weight Group-Eccentric | 1 |
| 22***21 | Hub-Coupling | 1 |
275-0487 Hydraulic Ar-Vibratory
| 18***93 | Valve & Mtg Group-Vibratory | 1 |
| 27***87 | Hydraulic Ar-Vibratory | 1 |
| 27***88 | Lines Group-Vibratory; -Hydraulic | 1 |
183-4758 Hydraulic Ar-Vibratory
| 18***58 | Hydraulic Ar-Vibratory | 1 |
| 18***86 | Lines Group-Vibratory; -Hydraulic Lines | 1 |
| 18***93 | Valve & Mtg Group-Vibratory | 1 |
275-0488 Lines Gp-Vibratory -Hydraulic
| 10***04 | Plate As | 2 |
| 10***49 | Plate | 2 |
| 11***79 | Hose As | 1 |
266-3568 Lines Gp-Vibratory
| 14***55 | Union As | 4 |
| 14***52 | Union As | 4 |
| 17***15 | Strap; (Dual Clamp) | 2 |
187-3086 Lines Gp-Vibratory -Hydraulic Lines
| 10***04 | Plate As | 2 |
| 10***49 | Plate | 2 |
| 11***79 | Hose As | 1 |
267-6675 Lines Gp-Vibratory
| 14***85 | Hose As | 2 |
| 14***77 | Elbow As. | 4 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 4 |
187-3088 Motor & Mtg Gp-Vibratory
| 14***47 | Elbow; (-12 Orb/Orfs) | 2 |
| 14***63 | Elbow Group | 1 |
| 14***74 | Elbow As | 1 |
194-1537 Pump & Mtg Gp-Vibratory
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
| 14***72 | Elbow Group | 1 |
| 19***37 | Pump & Mtg Group-Vibratory | 1 |
272-1010 Pump & Mtg Gp-Vibratory
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
| 14***72 | Elbow Group | 1 |
| 22***88 | Switch As-Rocker; (Vibratory Amplitude)(Vibratory, Select High/Low) | 1 |
342-7932 Pump & Mtg Gp-Vibratory
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
| 14***72 | Elbow Group | 1 |
| 19***39 | Pump Group-Piston; -Vibratory | 1 |
187-3092 Pump & Mtg Gp-Vibratory
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
| 14***72 | Elbow Group | 1 |
| 18***92 | Pump & Mtg Group-Vibratory | 1 |
186-4931 Shaft Gp-Eccentric Weight
| 18***33 | Shot; (Steel)(10-Kg) | 0 |
| 18***31 | Shaft Group-Eccentric Weight | 1 |
| 18***32 | Shaft As | 1 |
187-3093 Valve & Mtg Gp-Vibratory
| 14***18 | Connector As | 1 |
| 14***27 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
236-7614 Valve Gp-Vibratory -Hydraulic Control
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 21***75 | Seal-O-Ring | 1 |
| 23***14 | Valve Group-Vibratory; -Hydraulic Control | 1 |
311-6358 Valve Gp-Vibratory
| 16***80 | Kit-Service; (Counterbalance Valve) | 2 |
| 20***53 | Kit-Seal; (Valve)(Line, Boom) | 1 |
| 25***85 | Valve-Relief; (Hydraulic Control) | 1 |
283-9281 Weight Gp-Eccentric
| 08***92 | Pin | 2 |
| 08***64 | Seal-O-Ring | 2 |
| 08***53 | Seal-O-Ring | 1 |
270-8587 Weight Gp-Eccentric -5-Ampere
| 18***88 | Motor & Mtg Group-Vibratory | 2 |
| 19***37 | Pump & Mtg Group-Vibratory | 1 |
| 27***87 | Weight Group-Eccentric; -5-Ampere | 1 |
223-5411 Weight Gp-Eccentric -5-Ampere
| 18***88 | Motor & Mtg Group-Vibratory | 2 |
| 19***37 | Pump & Mtg Group-Vibratory | 1 |
| 22***94 | Housing Group-Eccentric Weight; -5-Ampere | 2 |
270-8585 Weight Gp-Eccentric -2-Ampere
| 18***88 | Motor & Mtg Group-Vibratory | 2 |
| 18***92 | Pump & Mtg Group-Vibratory | 1 |
| 27***85 | Weight Group-Eccentric; -2-Ampere | 1 |
283-9283 Weight Gp-Eccentric
| 18***88 | Motor & Mtg Group-Vibratory | 2 |
| 27***10 | Pump & Mtg Group-Vibratory | 1 |
| 28***82 | Housing Group-Eccentric Weight | 2 |
192-3667 Weight Gp-Eccentric -2-Ampere
| 18***27 | Housing Group-Eccentric Weight; -2-Ampere | 1 |
| 18***88 | Motor & Mtg Group-Vibratory | 2 |
| 18***92 | Pump & Mtg Group-Vibratory | 1 |
186-4930 Weight Gp-Eccentric
| 08***92 | Pin | 2 |
| 08***64 | Seal-O-Ring | 2 |
| 08***53 | Seal-O-Ring | 1 |
223-5391 Weight Gp-Eccentric
| 08***92 | Pin | 2 |
| 08***64 | Seal-O-Ring | 2 |
| 08***27 | Bushing-Terminal | 2 |
Water System
268-2780 Bar Gp-Spray -Extra Wide
| 08***65 | Seal | 1 |
| 14***38 | Strainer; (Water Spray Nozzle) | 9 |
| 14***39 | Cap; (Water Spray) | 10 |
195-4553 Bar Gp-Spray
| 08***65 | Seal | 1 |
| 14***38 | Strainer; (Water Spray Nozzle) | 7 |
| 14***39 | Cap; (Water Spray) | 8 |
194-4164 Filter Gp-Water
| 19***64 | Filter Group-Water | 1 |
| 25***80 | Filter Element-Water; (Water Spray Filter) | 1 |
| 7H***44 | Seal | 1 |
195-5773 Filter Gp-Water -Water Spray
| 01***24 | Bushing To Supply Port | 2 |
| 19***64 | Filter Group-Water | 1 |
| 19***73 | Filter Group-Water; -Water Spray | 1 |
194-3426 Gauge Gp-Water Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 19***26 | Gauge Group-Water Level | 1 |
259-6320 Lines Gp-Water Spray -Sidecutter
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***68 | Connector | 1 |
| 10***69 | Seal; (27.5mm Id) | 1 |
229-1673 Lines Gp-Water Spray -Cold Weather
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 11***86 | Cap; (Coolant Tank) | 1 |
195-4554 Lines Gp-Water Spray
| 00***70 | Tee-Pipe | 1 |
| 14***44 | Plate-Retainer | 4 |
| 14***46 | Insert-Nylon | 2 |
273-2557 Lines Gp-Water Spray
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***68 | Connector | 1 |
| 14***46 | Insert-Nylon | 2 |
229-1576 Lines Gp-Water Spray -Cold Weather
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 11***86 | Cap; (Coolant Tank) | 1 |
275-0593 Lines Gp-Water Spray
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 2 |
| 11***86 | Cap; (Coolant Tank) | 1 |
200-2997 Mat & Mtg Gp-Water
| 09***92 | Locknut; (M6x1-Thd) | 24 |
| 20***56 | Support-Mat | 2 |
| 20***97 | Mat & Mtg Group-Water | 1 |
263-6069 Mat & Mtg Gp-Water -Cocoa
| 09***92 | Locknut; (M6x1-Thd) | 12 |
| 19***01 | Support | 2 |
| 1G***09 | Mat-Water; (Cocoa) | 4 |
263-6070 Mat & Mtg Gp-Water -Distribution
| 09***92 | Locknut; (M6x1-Thd) | 28 |
| 21***25 | Support As | 4 |
| 25***14 | Support-Mat | 2 |
200-2998 Mat & Mtg Gp-Water -Cocoa
| 09***92 | Locknut; (M6x1-Thd) | 12 |
| 20***56 | Support-Mat | 2 |
| 20***98 | Mat & Mtg Group-Water; -Cocoa | 1 |
276-2528 Nozzle Gp-Water -Plastic
| 19***22 | Nozzle | 14 |
| 27***28 | Nozzle Group-Water; -Plastic | 1 |
276-2524 Nozzle Gp-Water -Brass
| 27***23 | Nozzle | 14 |
| 27***24 | Nozzle Group-Water; -Brass | 1 |
294-5275 Nozzle Gp-Water
| 28***29 | Nozzle; (Water) | 18 |
| 29***75 | Nozzle Group-Water | 1 |
286-1032 Nozzle Gp-Water
| 28***29 | Nozzle; (Water) | 14 |
| 28***32 | Nozzle Group-Water | 1 |
294-5278 Nozzle Gp-Water
| 19***22 | Nozzle | 18 |
| 29***78 | Nozzle Group-Water | 1 |
195-4555 Pump Gp-Water Spray
| 10***05 | Plate | 2 |
| 12***04 | Clamp-Half | 4 |
| 13***77 | Bolt; (M6x1x120-mm) | 4 |
330-2260 Pump Gp-Water Spray
| 10***05 | Plate | 2 |
| 12***04 | Clamp-Half | 4 |
| 13***77 | Bolt; (M6x1x120-mm) | 4 |
245-7712 Pump Gp-Water Spray
| 24***12 | Pump Group-Water Spray | 1 |
199-4393 Pump Gp-Water Spray
| 19***93 | Pump Group-Water Spray | 1 |
270-4454 Spray Ar-Water
| 19***76 | Tank Group-Water | 1 |
| 19***54 | Lines Group-Water Spray | 1 |
| 19***55 | Pump Group-Water Spray | 1 |
183-4763 Spray Ar-Water
| 18***63 | Spray Ar-Water | 1 |
| 19***76 | Tank Group-Water | 1 |
| 19***53 | Bar Group-Spray | 2 |
194-1939 Tank Gp-Water -Basic
| 19***39 | Tank Group-Water; -Basic | 1 |
| 19***03 | Cap; (Water Tank Fill) | 1 |
194-2176 Tank Gp-Water
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 08***49 | Gasket | 1 |
CB-434D serial number reference
The machine PIN plate is a riveted metal tag mounted on the frame (commonly near the articulation joint or on the frame rail under the operator's platform), separate from the engine serial tag bolted to the engine block itself — the two numbers are not the same. Read the plate as a 3-character prefix that identifies the model/build series, followed by a running sequence number; a plate reading CNH00588 is unit 588 in the CNH series. Always confirm which plate you are reading (machine PIN vs. engine serial) before ordering parts or looking up build year.
| Prefix | Identifies | Notes |
|---|---|---|
| CNH | CB-434D and CB-434D XW (extra-wide drum) vibratory compactor — one prefix covers both configurations | Sole PIN prefix documented for this family, starting at CNH1-up. Covers the standard-width CB-434D and the wider XW drum configuration built on the same base machine. Powered by the 3054C engine across the range. Rollout is placed in the mid-2000s; the exact closing serial and final build year are not consistently reported — confirm the production-year cutoff for a specific unit with your dealer. |
Frequently asked questions
What engine powers the Caterpillar CB-434D?
A Cat 3054C 4-cylinder turbocharged diesel, 4.4 L displacement, mechanically governed with mechanical fuel injection and no engine ECM. Gross power is about 62 kW (83 hp), net power about 59 kW (79.2 hp), meeting Tier 2 / Stage II emissions.
What is the operating weight of the CB-434D?
7,380-7,570 kg (16,270-16,689 lb) on the standard-drum machine, depending on configuration. The extra-wide XW variant, with a 1.70 m (67 in) drum versus the standard 1.50 m (59 in), runs close to 7,700 kg (16,979 lb).
What replaced the Caterpillar CB-434D?
Cat moved this size class to the CB44, later folded into the CB4.4 tandem vibratory roller line, continuing the same roughly 7 to 7.5-ton class with a comparable drum width. The CB-434D itself had replaced the earlier CB-434 (no D suffix), an older chassis generation from the 1990s.
What CB-434D owners discuss
What engine is in the CB-434D, and how has it held up for owners?
The CB-434D is built around the Cat 3054C diesel, rated at roughly 62 kW (83 hp) at 2,200 rpm, with a mechanically-injected fuel system rather than electronic common rail. Exact rating and calibration can vary by configuration/series, so treat this as a baseline, not a guarantee for every serial range. Properly maintained units run a long service life, but the 3054/3054C family has a known history of turbocharger failures that repeat if the root cause (oil supply, filter condition, a sticking wastegate) isn't fixed the first time rather than just swapping the turbo. Some owners also report thin cylinder liners or worn ring lands surfacing at teardown, and high oil pressure traced to a stuck or fouled relief valve rather than the pump itself. One consistent piece of field advice: do not use starting fluid on this engine for cold starts, chase hard-starting through glow/intake heat, fuel condition, and battery health instead.
How does the vibratory system work on the CB-434D, and does the amplitude/frequency setup affect wear?
Depending on how the machine was ordered, the CB-434D shipped with one of a few factory vibratory setups: a single-frequency, multi-amplitude system running about 53 Hz (roughly 3,200 vpm), a dual-amplitude system offering a high setting (about 4,200 vpm) and a low setting (about 3,200 vpm), or on some builds a dual-amplitude/dual-frequency system switching between 53 Hz and 70 Hz. Actual setup varies by configuration/series, so verify the specific arrangement on a given machine before comparing it to another unit. Vibration engages automatically once the propel lever comes off neutral and stops when it returns to neutral, with a manual override also fitted. Field experience across this class of tandem roller is that running high amplitude on a thin lift sends shock into the frame and drum bearings instead of into the mat, one of the more common causes of premature exciter and bearing wear. Match amplitude to lift thickness rather than defaulting to the highest setting.
What wear patterns show up in the drums and exciter housings on this type of compactor?
Loss or reduction of vibration is usually the first symptom of exciter trouble, followed in worse cases by oil weeping from a drum-end seal, a seized exciter gearbox, or a worn splined coupling that lets the vibratory motor spin without turning the eccentric weight shaft. Before a full failure, technicians report finding cracked welds, broken spring retainers, or unevenly seated springs inside the exciter housing at teardown, an early warning sign that is often missed until vibration is already gone. Drum-end bearing seals are hour-rated wear items; oil showing up on the drum shell or mixed into water spray residue means a seal has already started leaking and contamination is following it in. Keep drum bearings and pivot points greased on schedule and pull a drum end cover periodically rather than waiting for a vibration complaint to investigate.
What propel and articulation issues come up on the CB-434D?
This series carries 50/50 articulation on a vertical steering yoke frame, along with automatic speed control and an impact-spacing indicator. The articulation joint is the highest-wear pivot point on the machine; a clunk on direction change or noticeable play at the joint is worth checking before it is felt through the seat. On the hydrostatic propel side, a machine that creeps on a grade with the control lever in neutral, or does not hold when parked on an incline, points to worn propel pump or motor internals, or a parking brake that is not fully applying, not just a control adjustment. Treat that as a safety issue, not an operating nuisance. Have your dealer verify parking-brake holding force and propel-neutral behavior before returning the machine to grade work.
What electrical or sensor problems get reported for this compactor?
Detailed owner writeups specific to this exact model are thin compared with larger Cat compactors. What does surface for machines of this control-panel generation is mostly routine: corroded or loose battery terminals, a blown accessory fuse, or a telematics/monitoring module slowly drawing the battery down if the machine sits over a weekend without the master disconnect switch pulled. Rule those out in that order on a no-start with a dead dash before chasing anything deeper in the wiring harness.
What issues come up with the water spray system on the drums?
The most common complaint on any asphalt roller of this size and era is nozzle or strainer clogging from sediment in the tank water, which gets mistaken for a failed spray pump. Cleaning the inline strainer and nozzle screens resolves most of it. Running clean water, rinsing the tank between seasons, and fully draining the spray system ahead of a freeze prevents the other common failure mode: a pump or line seized by ice that looks identical to a burned-out pump until it is thawed and retested.
What should a buyer check before purchasing a used CB-434D?
Confirm the actual factory configuration against the compliance plate rather than the sale listing: single-frequency multi-amplitude vibratory, dual-amplitude, or dual-amplitude/dual-frequency, and standard drum versus the wider XW variant, since all were sold under the same model line and specs vary by configuration/series. Run the engine and watch for smoke, slow boost buildup, or high or erratic oil pressure given the 3054C's known turbo and liner history. Cycle the vibratory system through every amplitude setting and listen for exciter bearing noise or a setting that will not engage. Check the articulation joint for play and the drum-end seals for oil weep or water intrusion. Confirm the parking brake holds on a grade and the machine does not creep in neutral. Pull service records for oil and filter change intervals; this engine generation predates diesel particulate filters, so there is no aftertreatment to mask a history of neglect, but also no warning light forcing regular service. Have your dealer run a full pre-purchase inspection, particularly engine compression/turbo condition and propel-brake holding force, before finalizing a price.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific CB-434D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.