Caterpillarengine - machine(no series)
Caterpillar C9
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar C9 is a six-cylinder, 8.8-litre (538 cu in) turbocharged and air-to-air aftercooled diesel engine produced by Caterpillar under the ACERT (Advanced Combustion Emission Reduction Technology) branding. It uses a Hydraulic Electronic Unit Injector (HEUI) fuel system in which high-pressure engine oil actuates each injector — a design that is architecturally distinct from the later C9.3 (9.3 L) and must not be confused with it. In its excavator-market form the C9 delivered 184 kW (247 hp) in the 330C (produced approximately 2002–2006), rising to 200 kW (268 hp) in the 330D/330D L/LN/MH series (approximately 2006–2012) and 209 kW (281 hp) in the 336D and 336D2/D2 L models (approximately 2009–2019 across sub-variants). Operating weights span roughly 33,250 kg (73,300 lb) for a standard 330C to approximately 37,000 kg (81,600 lb) for a 336D2 L, varying by undercarriage option. Available configurations across the series included standard, L (long undercarriage), LN (long narrow), MH (material handler), FM (forestry), long-reach (LCR), and demolition-specific variants. The C9 was preceded in the 330-class by the 3306-engined Cat 330 and 330B, and machines fitted with the C9 were in turn succeeded by the 336E and 336F families, which adopted the enlarged and electronically updated C9.3 ACERT engine to meet Tier 4 Interim and Tier 4 Final emissions regulations.
The transition from the 3306 to the C9 represented a fundamental shift from a mechanically governed, cam-driven injection engine to a fully electronic, HEUI-actuated system that enabled precise timing control to meet Tier 3/Stage IIIA regulations while increasing power density. Compared with the 330B, the C9-powered 330C and 330D delivered improved fuel consumption, higher hydraulic flow for faster cycle times, and Cat Electronic Technician (Cat ET) diagnostic capability — a significant gain for fleet operators. In the used and parts market today, the C9 occupies a large installed base: the 330C, 330D, 336D, 336D2, and related 340D L models sold in high volumes globally through the 2000s and early 2010s, and the availability of aftermarket inframe rebuild kits, remanufactured HEUI pumps, and surplus injectors keeps these machines repairable at competitive cost. The HEUI system's sensitivity to oil quality means that machines with documented oil-change compliance command a clear premium over those with uncertain service histories, making verified maintenance records an important determinant of transaction price in both auction and private-sale channels.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar C9 specifications
Engine
| Engine model | Cat C9 ACERT — inline 6-cylinder, 4-stroke-cycle diesel with ACERT technology (turbocharged, aftercooled, direct injection; HEUI fuel system on earlier production; ADEM III electronic controls). Used in the Cat 973D Track Loader (2009–2015) and other industrial/OEM applications. |
| Displacement | 8.8 L (537 cu in) |
| Bore x stroke | 112 mm x 149 mm (4.41 in x 5.87 in) |
| Net power — 973D machine rating (ISO 9249 / SAE J1349) | 196 kW (263 hp) @ rated speed |
| Net power — industrial engine range (SAE J1995) | 205–280 bkW (275–375 bhp) @ 1800–2200 rpm depending on rating and application |
| Peak torque — industrial engine | Approximately 1,133–1,385 N·m (836–1,021 lb·ft) across 1800–2200 rpm range; peak near 1,380–1,430 N·m at lower rpm within the operating band |
| Compression ratio | 16.1:1 (some sources note 16.3:1 on certain configurations) |
| Aspiration | Turbocharged and aftercooled |
| Emissions tier | U.S. EPA Tier 3 equivalent / EU Stage IIIA equivalent (primary industrial rating); also available in Tier 2 / Stage II equivalent and China Nonroad Stage III variants. The 973D machine-installed rating meets Tier 3 / Stage IIIA. |
Weights
| Engine dry weight (stand-alone industrial unit) | 864 kg (1,905 lb); 681 kg for base variant. |
| 973D Track Loader operating weight (standard configuration) | 28,058 kg (61,857 lb) |
| Ground pressure — standard shoe | 85.5 kPa (12.4 psi) |
| Ground pressure — optional wider shoe | 69.5 kPa (10.1 psi) |
Dimensions
| Engine (stand-alone) — length x width x height | 1,091 mm x 827 mm x 1,023 mm (43.0 in x 32.6 in x 40.3 in) — official sheet. Note: an earlier base variant measures 1,078 mm x 832 mm x 954 mm. |
| 973D transport length | Approximately 7,200–7,305 mm (23.6–24.0 ft) — varies by configuration and attachment |
| 973D transport width (over tracks, standard shoe) | Approximately 2,710 mm (8 ft 11 in) |
| 973D transport height (ROPS cab) | Approximately 3,510 mm (11 ft 7 in) — 2017–2019 production series; earlier entries may reflect bucket-raised overall height |
| Track gauge | 675 mm (26.6 in) standard shoe width |
| Maximum discharge height (bucket at full raise) | Approximately 3,358 mm (11.0 ft) |
Performance
| Maximum travel speed | 11 km/h (6.8 mph) |
| General purpose bucket capacity | 3.21 m³ (4.20 yd³) |
| Multi-purpose bucket capacity | 3.05 m³ (3.99 yd³) — varies by bucket option |
| Rated load | Approximately 25,400 kg (56,000 lb); exact figure not independently confirmed. |
| Gradeability | Not published in sources consulted |
Service capacities (summary)
| Fuel tank — 973D | 621 L (164 US gal) |
| Hydraulic system total — 973D | 340 L (89.8 US gal) total system; hydraulic tank alone 189 L (49.9 US gal) |
| Engine oil (with filter) — 973D / C9 ACERT | 29 L (7.7 US gal) per machine spec sheet. Stand-alone industrial spec sheets cite 32 L (8.5 US gal) refill capacity — variation likely reflects sump/filter configuration differences |
| Cooling system — 973D | 44 L (11.6 US gal) for 973D installation. Industrial applications: 13.9–47 L depending on application and radiator size. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
C9 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (with filter) — Cat C9 ACERT, machine-installed | 35.6 L (9.4 US gal) | Cat DEO (Diesel Engine Oil): SAE 10W-30 preferred for ambient temps −18 °C to +40 °C; SAE 15W-40 for ambient above −10 °C to +50 °C; SAE 5W-40 (DEO-ULS SYN) for extreme cold below −18 °C. Meets Cat ECF-2 specification. API CK-4 or CJ-4 equivalents acceptable. |
| Cooling System (engine + radiator circuit) | 37.9 L (10.0 US gal) | Cat ELC (Extended Life Coolant) — factory-fill, premixed 50/50 with deionised water; freeze protection to −37 °C, boiling protection to 129 °C at 1 bar. OAT (organic-acid technology), nitrate- and silicate-free. Add Cat ELC Extender once at mid-life; full drain at approximately 12,000 h. Cat DEAC (Diesel Engine Antifreeze/Coolant) is an acceptable alternative with SCA maintenance. |
| Fuel Tank | 617 L (163 US gal) | Ultra-Low Sulfur Diesel (ULSD, ≤15 ppm sulfur) per EPA Tier 3/ACERT engine requirements. Biodiesel blends up to B20 FAME or 100% renewable diesel (HVO/GTL) are compatible per Cat fuel specification. |
| Hydraulic System (full circuit, including tank) | 408.8 L (108 US gal) | Cat HYDO Advanced 10 (SAE 10W) for ambient −20 °C to +40 °C — preferred grade for most climates, 6,000 h drain interval with S·O·S monitoring. Cat HYDO Advanced 30 (SAE 30W) for consistently hot ambient above +40 °C. Cat Bio HYDO Advanced available for environmentally sensitive areas. Minimum 900 ppm zinc anti-wear additive required. |
| Swing Drive (upper-structure slew gearbox) | 18.9 L (5.0 US gal) | Cat TDTO (Transmission/Drive Train Oil): SAE 30 for ambient 0 °C to +35 °C; SAE 10W for cold-climate operations below 0 °C. Meets Cat TO-4 / Allison C-4 specification. Cat TDTO-TMS or Cat Cold Weather TDTO for wide-range or sub-arctic operation. |
| Final Drive — each travel gearbox (two on machine) | 15.1 L (4.0 US gal) each | Cat TDTO (Transmission/Drive Train Oil): SAE 30 for normal ambient; SAE 10W for cold-start operations below 0 °C; SAE 50 available for very high ambient/heavy-duty cycles. Meets Cat TO-4 specification. Cat TDTO SYN (synthetic) extends drain intervals in severe service. |
| General Lubrication — pins, bushings, linkages, bucket joints | As required (grease gun application) | Cat Prime Application Grease NLGI 2 (current standard) — lithium-complex base, multi-purpose EP formula; NLGI 1 for consistent sub-zero conditions. For high-load oscillating joints (boom/stick/bucket pins on large excavators), Cat Extreme Application Grease 2 with moly disulfide additive is preferred. Swing ring/slewing bearing requires lithium-complex grease only. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar C9 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the C9 beyond the schedule
Predictive Maintenance & Fluid Analysis for the Cat C9
The C9's HEUI fuel system uses pressurised engine oil — up to 28 MPa (4,061 psi) — to actuate each injector, so oil condition directly governs injector longevity. Run Cat S·O·S Services engine-oil analysis at every 250-hour oil change and submit a hydraulic sample every 500 hours; rising iron and copper in either circuit signals HEUI pump wear or cylinder-bore degradation before failure is visible. Check injection actuation pressure live with Cat ET at each 1,000-hour service to catch pump output decay early. Track coolant inhibitor concentration every 250 hours with test strips; Cat ELC degrades faster in high-ambient-temperature climates.
Corrective & Common Repairs on the Cat C9
The most frequent in-service repairs on C9-powered 330D and 336D excavators involve HEUI injector seal hardening and nozzle plugging, both of which produce smoke, rough idle, and power loss. Fuel dilution of the crankcase oil — detectable by a falling oil viscosity reading in S·O·S reports — points to a failed injector lower O-ring. The HEUI high-pressure oil pump is a common secondary casualty when contaminated oil is run; metal debris from a failing pump can score all injectors simultaneously, making pump condition the first diagnostic check on any C9 no-start or low-power complaint. Boost pressure sensor codes and intake air temperature sensor failures are recurrent electronic faults addressable without removal.
Overhaul & Rebuild Decision Points for the Cat C9
The C9's in-frame overhaul threshold is guided by crankcase blow-by measurement, compression testing, and cumulative S·O·S metal trends rather than a fixed calendar date. In typical excavator duty cycles, top-end attention — valve reconditioning, injector replacement, and cylinder-liner honing — is commonly required in the 8,000–12,000-hour range. Full bottom-end work involving pistons, rings, liners, and main and rod bearings is typically justified once blow-by exceeds factory limits or oil consumption climbs above 0.5 percent of fuel consumption. Aftermarket inframe kits covering pistons, rings, liner sets, bearings, and valve-train components are widely available for 330C, 330D, 336D, and 336D2 host machines.
Seasonal & Environment Servicing for the Cat C9
In sub-zero operation, verify that engine oil viscosity grade is appropriate for the ambient start temperature; the C9's HEUI system is sluggish to build actuation pressure on cold, high-viscosity oil, leading to hard starts and injector stress. Use Cat ELC coolant mixed to a freeze point at least 5 °C below the expected minimum ambient. In hot, dusty conditions — common in quarry or road-building applications — halve air-filter inspection frequency to every 50 hours and monitor pre-cleaner evacuator valve function daily. In tropical or high-humidity environments, drain the fuel-water separator bowl daily and consider upgrading to a two-stage bulk-fuel filtration setup to reduce injector-seat corrosion caused by dissolved water.
C9 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 245-6375 | Filter Element-Air | Air intake service | Check fitment → |
| 245-6376 | Filter Element As-Air | Air intake service | Check fitment → |
| 149-1912 | Filter Element-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
C9 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| E360(1/3) — Low Engine Oil Pressure | Event code for oil pressure falling below the speed-mapped trip point. Severity 1 triggers a warning lamp with no automatic engine intervention; severity 3 commands engine shutdown after a brief delay. No severity-2 derate level is documented for E360 on the C9 machine engine list — only warning (1) and shutdown (3) are confirmed. | Low oil level, worn oil pump, blocked oil pickup strainer, or failed oil pressure sensor sending a false reading. Hot, thin oil at low idle is a contributing factor. Aeration of the oil from a cracked suction tube is also a documented cause. | Stop machine immediately on a severity-3 event. Check oil level first; if correct, attach Cat ET or a mechanical gauge to the test port and compare actual versus sensed pressure to distinguish a real low-pressure condition from a sensor fault before restarting. |
| E361(1/2/3) — High Engine Coolant Temperature | Coolant temperature has exceeded the trip point. Severity-1 warning triggers at 113 °C (235 °F) with a 10-second delay. Severity-2 derate triggers at 116 °C (241 °F) with a 10-second delay. Severity-3 shutdown also triggers at 116 °C (241 °F) — not at a higher threshold — per the C9 built-machines document. | Low coolant level, plugged or damaged radiator, failed thermostat, faulty water pump, or air pockets in the cooling system. In excavator applications, a clogged hydraulic oil cooler sharing airflow with the radiator is a common contributor. | Reduce load or shut down to prevent head gasket damage. Check coolant level in the deaeration tank, inspect radiator and cooler cores for debris blockage, and verify thermostat operation. Clear the code after correcting the root cause via Cat ET. |
| E362(1/2) — Engine Overspeed | Engine rpm exceeded the configured overspeed trip point. Severity-1 warning triggers at 2600 rpm with a 0.6-second delay; severity-2 derate triggers at 2800 rpm with a 0.6-second delay. | Sudden loss of load on a machine (e.g., bucket break-out, implement release), operator error, or a failed governor or throttle actuator on industrial-engine installations. Can also result from a faulty engine speed sensor sending inflated rpm data. | Reduce throttle or load immediately. If no mechanical overspeed occurred, check the primary speed sensor and its air gap; a sensor reading error can generate a false E362. Log the event with Cat ET to check for concurrent speed sensor codes. |
| 164-03 / 164-04 — Injection Actuation Pressure Sensor Voltage Above/Below Normal | The ECM has detected the injection actuation pressure (IAP) sensor signal is outside its valid voltage range. FMI 03 is voltage high (open circuit or short to supply); FMI 04 is voltage low (short to ground). Both cause a derate and rough running on HEUI-equipped C9 variants. These codes do not apply to C9S or later common-rail variants. | Failed IAP sensor (internal contamination by metal particles is common on high-mileage units), corroded or damaged wiring harness at the sensor connector, or a shorted signal wire. Rarely, an ECM input circuit failure. | Inspect the sensor connector and wiring for corrosion or chafing damage. Use Cat ET to monitor live IAP voltage; a reading stuck at supply voltage or ground confirms a wiring or sensor fault. Replace the sensor if wiring checks out. |
| 164-11 / 164-02 — Injection Actuation Pressure Below/Erratic Desired | Actual HEUI injection actuation pressure is lower than the ECM-commanded value (FMI 11), or the sensor signal is erratic (FMI 02). Engine derates, idles roughly, and may exhibit hard starting or white or black smoke. Applies only to HEUI-equipped C9 variants. | Failing HEUI high-pressure oil pump, sticking or worn injection actuation pressure control valve (IAPCV), injector O-ring leakdown allowing oil to bypass, or low or degraded engine oil. FMI 02 alone often points to a sensor or wiring intermittent fault. | Install a hydraulic gauge at the IAP test port to confirm whether actual pressure matches sensed pressure. If pressures match and are low, check oil level and condition, then test the IAPCV before condemning the HEUI pump. If pressures diverge, replace the IAP sensor. |
| 190-08 — Engine Speed Sensor Abnormal Frequency/Pulse Width | The primary crankshaft speed/timing sensor signal has an abnormal frequency, pulse width, or period; the ECM cannot reliably determine engine speed, which can cause derate, erratic rpm display, or no-start conditions. | Incorrect air gap between sensor tip and tone ring (most common), worn or chipped tone ring tooth, sensor connector corrosion, or a physically damaged sensor. Wiring chafing against the engine block is also reported on excavator applications. | Check the sensor-to-tone-ring air gap first using a feeler gauge and compare to the service manual specification. Rotate the engine slowly and inspect tone ring teeth for damage. If gap and ring are correct, check the connector for corrosion and test the sensor output waveform with the Cat ET oscilloscope function. |
| 41-03 / 41-04 — 8-Volt DC Sensor Supply Voltage High/Low | The ECM-internal 8 V reference supply, shared by multiple sensors, is reading above normal (FMI 03, short to a higher-voltage source) or below normal (FMI 04, short to ground). When active, this code is typically accompanied by several simultaneous sensor fault codes for oil pressure, coolant temperature, boost pressure, and throttle position. | A short to ground on any sensor sharing the 8 V supply bus; damaged wiring harness where multiple sensor signal wires share a conduit. Rarely an internal ECM fault. | Diagnose the 8 V supply fault before addressing any individual sensor codes — fixing the supply will likely clear the cascade. Disconnect sensors one at a time while monitoring 8 V supply voltage with Cat ET to locate the shorted circuit. Do not replace individual sensors until the supply fault is resolved. |
| E198(1/2) — Low Fuel Pressure | Transfer pump delivery pressure has dropped below the trip point. Severity-1 warning triggers at 175 kPa (25 psi) with a 30-second delay; severity-2 derate triggers at 150 kPa (22 psi) with a 15-second delay. On HEUI variants this is transfer/supply pressure, not injection actuation pressure. | Plugged primary or secondary fuel filter, failing fuel transfer pump, air ingestion from a cracked fuel supply line or degraded suction hose, or a restricted tank fuel pickup. | Replace both primary and secondary fuel filters first; if the code clears, service interval was overdue. If the code persists, measure transfer pump output pressure. Inspect fuel supply lines for cracks or loose fittings at the tank. |
| 91-13 — Throttle Position Out of Calibration | The accelerator pedal position sensor signal is operating outside its calibrated duty-cycle range. The ECM defaults the throttle to a fixed low position and limits engine output. | Worn or internally failed accelerator pedal position sensor assembly. Also triggered when the ECM 8 V sensor supply drops below 7.5 V for more than one second, or after an ECM replacement without re-calibration. | Verify 8 V sensor supply is stable (rule out a 41-04 condition first). Use Cat ET to view live accelerator pedal data; the normal duty-cycle range is approximately 10–22% at low idle and 75–90% at full throttle depression. If the duty cycle is outside these ranges, the pedal assembly requires replacement. |
| 261-13 — Engine Timing Calibration Required | The ECM has detected that the speed/timing sensor calibration is not current. The engine can run normally but accurate timing control is compromised; emission compliance and optimal fuel economy may be affected. | Replacement of the ECM, primary or secondary engine speed/timing sensor, or timing gear service or engine overhaul without performing the required timing calibration procedure afterward. | Using Cat ET, navigate to Service, then Calibrations, then Timing Calibration with the engine warmed up and out of cold-mode operation. Run the calibration routine; the code clears on successful completion. A timing transducer and associated adapter hardware are required for the procedure. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
C9 attachments & work tools
Machine Identity & Engine Confirmation
The Cat C9 ACERT engine (8.8 L displacement, approximately 200–209 kW / 268–281 hp net, varies by series) is the confirmed powerplant for the Cat 336D, 336D L, 336D2, 336D2 L, and 336D2 GC hydraulic excavators. The succeeding 336E and 336F lines use the distinct C9.3 ACERT engine and are not included here. Operating weight for the standard-undercarriage 336D/D2 is approximately 33,750–35,020 kg (74,400–77,200 lb) depending on configuration.
Bucket Work-Tool Families
Four factory bucket grades are offered across the 336D/D2 class: General Duty (GD) for low-impact, moderately abrasive materials such as loam and clay; Heavy Duty (HD) for mixed dirt, clay, sand, and gravel conditions; Severe Duty (SD) for highly abrasive shot rock and sandstone; and Extreme Duty (XD) for extremely abrasive materials such as high-quartzite granite. Widths range from approximately 1,200 mm to 1,900 mm (47–75 in); capacity for a standard HD configuration runs roughly 1.2–2.3 m³ (1.6–3.0 yd³) depending on stick and boom selection. Specialized designs including ditch-cleaning, rock, and finishing buckets are also catalogued.
Bucket Linkage & Mounting System
The primary bucket-mounting system for the 336D/D2 class is the DB linkage family, using a short pin of 100 mm diameter and a long pin of 90 mm diameter; this pin set is shared across the Cat 330D, 336D, 336E, and 336F, enabling cross-fleet bucket exchange. A TB1 / TB linkage family is employed on mass-excavation stick variants, which carry larger-capacity buckets with lifting eyes for crane-assist tasks. Buckets ordered with the machine specify the linkage family at the stick end to ensure correct tip-radius retention and maximum breakout force.
Quick-Coupler Systems
Two coupler architectures are factory-available: the Dedicated Quick Coupler (DQC), a hydraulically actuated system matched to the DB or TB1 linkage that allows in-cab attachment changes without loss of tip radius; and the DB-Linkage Pin-Grabber Coupler, a semi-automatic system that grabs attachments with differing pin spans within a tolerance range, broadening third-party compatibility. The CW-series hydraulic wedge coupler is also listed for the 336 class, featuring a tapered-wedge lock suited to demolition and quarry cycles. All hydraulic coupler variants require a dedicated coupler actuation circuit, typically included in the auxiliary hydraulic option package.
Hydraulic Hammers
Factory work-tool matching guides for the 336D/D2 list the H130, H140, and H160 series hydraulic hammers as the primary matched breaker options for this machine class. The H140 S requires rated flow of approximately 160–230 L/min (42–61 gal/min) at 13,000–16,000 kPa (1,885–2,320 psi); the H160 S requires approximately 220–300 L/min (58–79 gal/min) at the same pressure range. An E-Series silenced variant is offered for noise-sensitive urban sites. The machine's auxiliary valve circuit must be ordered or confirmed for hammer operation.
Demolition & Recycling Work Tools
Multi-processors with interchangeable jaw sets (crushing, pulverizing, and shear jaws) enable one attachment to perform primary demolition, concrete reduction, and steel cutting. Primary and secondary hydraulic pulverizers reduce concrete and separate rebar for recycling without secondary processing. Scrap and demolition shears feature 360° rotation and are matched to the 336-class hydraulic system for steel structure and bulk-scrap processing; operation of rotating tools requires the medium-pressure auxiliary circuit with a third pump, available as a factory or dealer option.
Grapples
Demolition and Sorting Grapples handle concrete, rebar, wood, and mixed debris with high clamping force. Rotating Scrap and Demolition Grapples provide 360° slew for scrap-yard and bulk-material work; trash grapples for the 336D class are listed in sizes up to approximately 4.4 m³ and 5.8 m³. Rotating grapple models require the medium-pressure hydraulic circuit option; non-rotating (static) grapples operate on the standard single auxiliary circuit.
Compactors & Ground-Engagement Tools
Vibratory plate compactors are listed in the 336D work-tool matching guide for trench and slope compaction. Rippers fabricated from high-strength steel with replaceable wear tips mount directly to the stick via DB linkage and are catalogued as a single-tooth option for rock fracturing and root removal. Cat mechanical thumbs for material handling mount to the stick and work in conjunction with the bucket, converting the excavator into a versatile grappling tool without additional hydraulic circuits.
Front Linkage & Boom Configurations
The 336D/D2 class offers two boom families: a standard Heavy-Duty Reach (R) boom at 6.5 m (21 ft 4 in) available in standard and reinforced heavy-duty versions, paired with stick options of 3.9 m (12 ft 10 in), 3.2 m (10 ft 6 in), or 2.8 m (9 ft 2 in) for DB linkage; and a Mass Excavation (ME) boom at 6.18 m (20 ft 3 in) paired with 2.55 m (8 ft 4 in) or 2.15 m (7 ft 1 in) sticks using TB1 linkage for high-volume earth moving with the largest capacity buckets. Long-reach configurations extending reach to approximately 18 m (59 ft) are documented by specialist-dealer configurations.
Auxiliary Hydraulic Circuit Options
The standard 336D/D2 ships with a single auxiliary valve as standard, enabling operation of high-pressure, single-circuit tools such as hydraulic hammers. A medium-pressure auxiliary circuit with a dedicated third pump is an orderable option enabling rotation-dependent tools (shears, rotating grapples, multi-processors). The Tool Control System (TCS) allows operators to programme and store custom hydraulic flow and pressure settings for multiple work tools, reducing the need for manual re-adjustment at attachment changes.
Undercarriage & Track Options
Track shoe widths of 600 mm, 700 mm, and 800 mm (24 in, 28 in, 32 in) triple-grouser shoes are factory options; wider shoes reduce ground pressure for soft-terrain work. Standard and long-track undercarriage frames are available. Grease-lubricated sealed track links are standard; grease-sealed track pins and bushings reduce wear and travel noise. Track guiding guards and heavy-duty bottom guards are factory options for rock and demolition duty.
Operator & Cab Guarding Options
FOGS (Falling Object Guard System) bolt-on guards are available factory-installed or field-fitted to protect the cab from overhead debris in demolition, forestry, and quarry applications; the cab top guard and cab front guard are separate orderable items. Vandalism guards — lockable steel plates securing windows and access points — are listed as a factory option. Heavy-duty swivel protection and heavy-duty travel motor protection address undercarriage vulnerability on abrasive sites. A ROPS-certified cab structure is standard across the 336D/D2 series.
All C9 assemblies by section
Every catalogued assembly group for the Caterpillar C9. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
250-8318 Adapter Gp-Turbocharger
| 12***07 | Mount As-Resilient | 2 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 2 |
| 24***63 | Aftercooler As | 1 |
231-2311 Aftercooler Gp-Air
| 09***49 | Bolt; (M8x1.25x40-mm) | 4 |
| 21***14 | Clamp | 1 |
| 23***11 | Aftercooler Group-Air | 1 |
231-2114 Air Cleaner Gp
| 23***14 | Air Cleaner Group | 1 |
| 24***75 | Filter Element-Air; (Primary) | 1 |
| 24***76 | Filter Element As-Air; (Secondary) | 1 |
247-9729 Air Cleaner Gp
| 1U***46 | Sealant (For Locations A) | 0 |
| 24***29 | Air Cleaner Group | 1 |
| 29***75 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
294-7675 Cover Gp-Air Inlet -Starting Aid Heater
| 13***53 | Stud; (M8x1.25x82.75-mm)(M8x1.25x82.75-mm) | 4 |
| 14***95 | Plug As | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
189-8780 Cover Gp-Air Inlet -Includes Heater
| 18***80 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 24***95 | Insulator; (Air Inlet Heater) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
241-2794 Elbow Gp-Air Inlet
| 06***26 | Cap-Tube | 4 |
| 14***95 | Plug As | 1 |
| 19***94 | Stud; (M8x1.25x80-mm)(M8x1.25x80-mm) | 4 |
275-1307 Elbow Gp-Air Inlet
| 18***89 | Elbow-Turbocharger | 1 |
| 27***07 | Elbow Group-Air Inlet | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
190-1096 Elbow Gp-Exhaust
| 17***81 | Hose | 2 |
| 19***96 | Elbow Group-Exhaust | 1 |
| 20***78 | Clamp-Tbolt | 8 |
246-6704 Lines Gp-Aftercooler Air
| 17***81 | Hose | 1 |
| 20***78 | Clamp-Tbolt | 8 |
| 24***04 | Lines Group-Aftercooler Air | 1 |
249-3666 Lines Gp-Aftercooler Air
| 22***25 | Clamp | 1 |
| 23***71 | Clamp | 3 |
| 24***66 | Lines Group-Aftercooler Air | 1 |
231-2136 Lines Gp-Aftercooler Air
| 13***43 | Clamp-Hose | 4 |
| 17***81 | Hose | 1 |
| 20***78 | Clamp-Tbolt | 8 |
255-1283 Lines Gp-Air
| 22***25 | Clamp | 1 |
| 23***71 | Clamp | 3 |
| 25***62 | Tube As | 1 |
249-3665 Lines Gp-Air
| 22***25 | Clamp | 1 |
| 23***71 | Clamp | 3 |
| 24***65 | Lines Group-Air | 1 |
255-1284 Lines Gp-Air
| 11***15 | Stud-Taperlock; (M10x85-mm Oal) | 12 |
| 16***11 | Gasket | 6 |
| 16***72 | Manifold-Exhaust | 1 |
257-8467 Manifold Gp-Exhaust
| 14***80 | Clamp Assem. | 1 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 5 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 2 |
189-9987 Manifold Gp-Exhaust
| 17***98 | Bolt-Flange Head; (M10x1.5-Thd) | 10 |
| 18***98 | Stud; (M10x1.5x55-mm) | 4 |
| 18***54 | Manifold-Exhaust; (Center) | 1 |
246-6709 Muffler & Mounting Gp
| 07***07 | Precleaner As; (Air Cleaner Turbine) | 1 |
| 24***09 | Muffler & Mounting Group | 1 |
| 25***43 | Damper | 1 |
231-2159 Muffler & Mounting Gp
| 14***80 | Clamp Assem. | 1 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 7 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 2 |
233-3387 Precleaner Gp
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 15***72 | Clamp As; (Compressor) | 1 |
| 16***63 | Clamp | 2 |
257-9375 Turbocharger Gp
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 15***72 | Clamp As; (Compressor) | 1 |
| 16***63 | Clamp | 2 |
352-2395 Turbocharger Gp
| 16***65 | Bolt-Socket Head; (M4x0.7x16-mm) | 6 |
| 21***21 | Mount As | 1 |
| 21***69 | Vent As | 1 |
350-9729 Turbocharger Gp
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 15***72 | Clamp As; (Compressor) | 1 |
| 16***63 | Clamp | 2 |
250-2334 Turbocharger Gp
| 22***47 | Bolt; (M10x1.5x40-mm)(High Temperature) | 4 |
| 25***34 | Turbocharger Group | 1 |
| 35***29 | Turbocharger Group | 1 |
254-3813 Turbocharger Gp
| 25***34 | Turbocharger Group | 1 |
| 25***13 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
Basic Engine
242-8998 Air Compressor Ar
| 17***83 | Seal-O-Ring | 1 |
| 24***98 | Air Compressor Ar | 1 |
| 2P***58 | Flange | 1 |
261-0610 Air Compressor Ar
| 00***81 | Elbow | 1 |
| 03***42 | Elbow Hose Assembly To | 1 |
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
224-0003 Air Compressor Gp
| 00***81 | Elbow | 1 |
| 03***90 | Connector-Flared | 1 |
| 12***57 | Clamp-Hose | 2 |
246-6719 Air Compressor Gp
| 23***84 | Bracket As | 1 |
| 24***19 | Air Compressor Group | 1 |
| 3E***53 | Washer-Hard; (11x25x3-mm Thk) | 4 |
241-1865 Air Compressor Gp
| 13***42 | Belt Tightener; (Auxiliary Drive) | 1 |
| 24***65 | Air Compressor Group | 1 |
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 1 |
110-0361 Belt Tensioner Gp
| 10***94 | Plate-Thrust | 1 |
| 11***61 | Belt Tensioner Group | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
236-3985 Bracket Gp-Mounting -Filter
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 22***47 | Gear; (100-Teeth) | 1 |
242-0674 Camshaft Gp
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 21***21 | Stud; (M8x1.25-Thd) | 1 |
212-4289 Camshaft Gp
| 21***89 | Camshaft Group | 1 |
| 21***10 | Gasket | 1 |
| 21***11 | Cover; (Cylinder Block) | 1 |
183-3649 Cover Gp-Cylinder Block
| 13***19 | Seal-Integral; (Integral) | 1 |
| 18***49 | Cover Group-Cylinder Block; -Rear | 1 |
| 4W***26 | Cover | 1 |
229-8841 Cover Gp-Cylinder Block
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
| 13***22 | Stud | 2 |
| 20***60 | Cover As-Front | 1 |
275-0595 Cover Gp-Front Housing
| 09***49 | Bolt; (M8x1.25x40-mm) | 13 |
| 27***88 | Seal-Valve Cover; (Valve Mechanism Base) | 1 |
| 27***95 | Cover Group-Front Housing | 1 |
217-8669 Cover Gp-Front Housing
| 21***69 | Cover Group-Front Housing | 1 |
| 22***31 | Cap As-Filler; (Engine Oil) | 1 |
| 26***90 | Seal-Valve Cover; (Valve Mechanism Base) | 1 |
118-1727 Cover Gp-Front Housing -Accessory Drive
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 10***12 | Spacer; (11.13x19.05x53-mm Thk) | 1 |
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
288-8158 Cover Gp-Valve Mechanism
| 15***39 | Bearing-Main; (Standard) | 7 |
| 1B***05 | Key; (Woodruff) | 1 |
| 24***16 | Bearing Group-Main | 0 |
307-1735 Cover Gp-Valve Mechanism
| 10***08 | Bearing-Main; (Standard) | 6 |
| 14***62 | Bearing; (0.25mm Undersize) | 0 |
| 14***64 | Bearing; (0.5mm Undersize) | 0 |
210-5590 Crankshaft Gp
| 0S***19 | Plug-Cup | 1 |
| 1W***07 | Sleeve | 2 |
| 21***90 | Crankshaft Group | 1 |
164-6148 Crankshaft Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 2 |
| 16***48 | Crankshaft Group | 1 |
| 17***54 | Bolt-Hex Head; (M16x160mm) | 14 |
325-3915 Cylinder Block As
| 16***24 | Seal-Liner | 6 |
| 19***62 | Liner-Cylinder Block | 6 |
| 32***15 | Cylinder Block As | 2 |
161-3406 Cylinder Block Gp
| 16***06 | Cylinder Block Group | 1 |
| 1W***07 | Sleeve | 2 |
| 30***41 | Cylinder Block Group | 1 |
305-8141 Cylinder Block Gp
| 22***00 | Sleeve-Injector | 6 |
| 23***85 | Insert-Valve Seat; (Standard)(Exhaust) | 6 |
| 26***57 | Insert-Valve Seat; (Standard)(Inlet) | 12 |
221-4482 Cylinder Block Gp
| 10***04 | Sleeve-Cylinder | 0 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
| 22***82 | Cylinder Block Group | 1 |
263-3774 Cylinder Block Gp
| 21***17 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
| 22***00 | Sleeve-Injector | 6 |
| 24***88 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
220-1952 Cylinder Block Gp
| 22***52 | Cylinder Block Group | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 14 |
| 7E***68 | Cap-Crankshaft Bearing | 7 |
332-3619 Cylinder Head As
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***84 | Seal; (35.6mm Od) | 1 |
314-4184 Cylinder Head As
| 21***17 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
| 22***00 | Sleeve-Injector | 6 |
| 24***88 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
219-5849 Cylinder Head Gp
| 18***15 | Gasket Assem. | 1 |
| 21***49 | Cylinder Head Group | 1 |
| 25***39 | Cylinder Head Group | 1 |
242-0672 Cylinder Head Gp
| 14***95 | Plug As | 2 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 12 |
| 19***15 | Spring-Valve; (Inner) | 12 |
345-8414 Cylinder Head Gp
| 16***21 | Damper Assem. | 1 |
| 17***67 | Pulley-Crankshaft | 1 |
| 22***21 | Spacer; (101.5x167x8-mm Thk) | 1 |
300-9550 Cylinder Head Gp
| 16***78 | Seal-Valve Stem; (Exhaust) | 12 |
| 19***15 | Spring-Valve; (Inner) | 12 |
| 19***17 | Spring-Valve; (Outer) | 12 |
252-8439 Cylinder Head Gp
| 13***83 | Retainer-Spring | 6 |
| 13***15 | Seat-Valve Spring | 6 |
| 13***18 | Spring-Valve; (Exhaust) | 6 |
219-5847 Cylinder Head Gp
| 13***95 | Gasket-Cylinder Head | 1 |
| 13***52 | Bolt-12 Point Head; (M20x2.5x170mm) | 1 |
| 14***89 | Fastener Group-Cylinder Head | 14 |
344-2149 Cylinder Head Gp
| 18***15 | Gasket Assem. | 1 |
| 2A***46 | Plug 9.80mm(.386in.)Outside Dia. | 1 |
| 34***49 | Cylinder Head Group | 2 |
250-8309 Damper & Pulley Gp
| 20***19 | Damper As | 1 |
| 25***09 | Damper & Pulley Group | 1 |
211-8041 Damper Gp
| 21***41 | Damper Group | 1 |
| 26***15 | Bolt-12 Point Head; (M16x2x180-mm) | 1 |
| 29***84 | Fastener Group-Cylinder Head | 26 |
213-4363 Fastener Gp-Cylinder Head
| 21***63 | Fastener Group-Cylinder Head | 1 |
| 22***44 | Clip | 3 |
| 24***00 | Spring | 11 |
258-8723 Fastener Gp-Cylinder Head
| 22***21 | Spacer; (101.5x167x8-mm Thk) | 1 |
| 25***23 | Fastener Group-Cylinder Head; -Valve Cover Base | 1 |
| 6V***49 | Bolt; (M10x1.5x50-mm) | 8 |
218-0859 Fastener Gp-Damper & Pulley
| 21***59 | Fastener Group-Damper & Pulley | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 12 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 2 |
262-7056 Fastener Gp-Front Cover
| 26***56 | Fastener Group-Front Cover | 1 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 11 |
| 8T***12 | Bolt-Plt; (M8 X 1.25 X 50) | 11 |
236-7315 Fastener Gp-Valve Cover
| 23***15 | Fastener Group-Valve Cover | 1 |
| 24***00 | Spring | 9 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 9 |
233-0423 Fastener Gp-Valve Cover Base
| 23***23 | Fastener Group-Valve Cover Base | 1 |
| 23***69 | Flywheel As | 1 |
| 25***51 | Gear-Flywheel; (113-Teeth) | 1 |
250-8312 Flywheel Gp
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
| 11***19 | Plate-Retaining | 1 |
236-2570 Flywheel Gp
| 23***70 | Flywheel Group | 1 |
| 25***05 | Flywheel As | 1 |
| 25***70 | Bolt; (M12x1.75x150-mm) | 8 |
205-1321 Gear Gp-Front
| 15***58 | Gear Crankshaft; (68 Teeth) | 1 |
| 16***84 | Bearing-Sleeve | 1 |
| 18***94 | Gear Assem.; (64 And 14 Teeth) | 1 |
241-2792 Gear Gp-Rear
| 16***84 | Bearing-Sleeve | 1 |
| 18***94 | Gear Assem.; (64 And 14 Teeth) | 1 |
| 1W***38 | Bearing-Sleeve | 1 |
250-8308 Gear Gp-Rear
| 10***34 | Cover | 1 |
| 14***95 | Plug As | 2 |
| 14***05 | Plug As-Sto | 1 |
251-1135 Housing Gp-Flywheel
| 10***34 | Cover | 1 |
| 14***95 | Plug As | 2 |
| 14***05 | Plug As-Sto | 1 |
258-9997 Housing Gp-Flywheel
| 1U***46 | Sealant (For Locations A) | 0 |
| 24***59 | Housing-Front | 1 |
| 25***97 | Housing Group-Flywheel | 1 |
209-0758 Housing Gp-Front
| 13***84 | Spacer; (15.9x24x6-mm Thk) | 2 |
| 13***76 | Shaft As-Lifter | 1 |
| 20***58 | Housing Group-Front | 1 |
165-4446 Housing Gp-Front
| 16***46 | Housing Group-Front | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 24***61 | Housing-Front | 1 |
139-4081 Lifter Gp-Valve -Mechanism
| 13***81 | Lifter Group-Valve; -Mechanism | 1 |
| 19***14 | Plate; (Lifting) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
339-7815 Lifting Gp-Engine
| 12***40 | Support-Alternator | 1 |
| 13***82 | Support-Alternator | 1 |
| 33***15 | Lifting Group-Engine | 1 |
239-5016 Lifting Gp-Engine
| 23***16 | Lifting Group-Engine | 1 |
| 33***14 | Plate-Lifting | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
196-1912 Lifting Gp-Engine
| 18***17 | Plate-Lifting | 1 |
| 19***12 | Lifting Group-Engine | 1 |
| 22***66 | Plate-Lifting; (Front) | 1 |
169-3130 Mounting Gp-Alternator
| 16***30 | Mounting Group-Alternator | 1 |
| 24***65 | Bracket | 1 |
| 8T***86 | Bolt-Plt; (M10 X 1.5 X 40) | 5 |
248-2755 Mounting Gp-Alternator & Compr
| 19***81 | Washer-Hard; (22x40x10-mm Thk) | 8 |
| 24***55 | Mounting Group-Alternator & Compr | 1 |
| 25***77 | Mount As; (Lh) | 2 |
231-2156 Mounting Gp-Engine & Xmsn
| 19***49 | Belt Tensioner | 1 |
| 23***56 | Mounting Group-Engine & Xmsn | 1 |
| 33***44 | Support As-Fan | 1 |
293-4622 Mounting Gp-Fan Drive
| 16***05 | Seal-Integral | 1 |
| 17***76 | Bolt; (M8x1.25x19.5-mm)(M8x1.25-Thd) | 36 |
| 25***93 | Pan Group-Oil; (Engine) | 1 |
294-9168 Pan Gp-Oil -Engine
| 19***53 | Ring-Piston; (Intermediate) | 1 |
| 19***71 | Pin-Piston | 1 |
| 19***72 | Retainer-Pin | 2 |
250-8320 Pan Gp-Oil -Engine
| 12***21 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 19***14 | Gasket-Oil Pan; (Engine) | 1 |
| 25***20 | Pan Group-Oil; -Engine | 1 |
212-3652 Piston & Rod Gp
| 16***94 | Bearing; (Connecting Rod) | 1 |
| 16***97 | Bolt | 2 |
| 16***99 | Rod Assem. | 1 |
265-1400 Piston & Rod Gp
| 26***00 | Piston & Rod Group | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 6F***62 | Washer,Flat Transmission Oil Cooler | 1 |
159-0303 Plug Gp-Cylinder Block
| 14***95 | Plug As | 1 |
| 15***03 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
162-8068 Plug Gp-Engine -Engine Oil
| 16***68 | Plug Group-Engine; -Oil Gallery | 1 |
| 18***06 | Plug As; (High Temperature) | 2 |
| 18***08 | Plug As; (High Temperature) | 1 |
253-9724 Plug Gp-Engine
| 15***36 | Pulley-Crankshaft; (8-Groove) | 1 |
| 25***24 | Plug Group-Engine | 1 |
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
211-8043 Pulley Gp-Crankshaft
| 12***90 | Bolt; (M10x1.5) | 1 |
| 12***91 | Cover-Dust | 1 |
| 12***92 | Pulley As-Idler; (8-Groove) | 1 |
175-3223 Pulley Gp-Idler
| 16***47 | Rocker Arm As | 1 |
| 17***23 | Pulley Group-Idler; (8 Groove) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
256-3831 Rocker Arm Gp -Exhaust
| 25***31 | Rocker Arm Group; -Exhaust | 1 |
| 25***35 | Rocker Arm As; (Inlet) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
256-3834 Rocker Arm Gp -Inlet
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
| 25***34 | Rocker Arm Group; -Inlet | 1 |
| 7E***89 | Seal Group-Crankshaft | 1 |
213-9320 Rocker Arm Gp -Exhaust
| 21***20 | Rocker Arm Group; -Exhaust | 1 |
| 24***28 | Rocker Arm As | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
242-0329 Rocker Arm Gp -Inlet
| 24***29 | Rocker Arm Group; -Inlet | 1 |
| 25***32 | Rocker Arm As; (Exhaust) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
189-9306 Seal Gp-Crankshaft
| 10***80 | Seal-O-Ring (Id=177.17mm) | 1 |
| 18***71 | Seal Group-Crankshaft | 1 |
| 18***06 | Seal Group-Crankshaft | 1 |
285-4074 Seal Gp-Crankshaft
| 24***71 | Support-Front | 1 |
| 28***74 | Seal Group-Crankshaft | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 1 |
7e-7590 Seal Gp-Crankshaft
| 20***19 | Bolt Assem.; (M6x1) | 9 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
| 28***74 | Seal Group-Crankshaft | 1 |
247-0270 Support Gp-Engine
| 16***45 | Shaft As-Rocker Arm | 1 |
| 16***59 | Spring | 6 |
| 16***69 | Stand; (End) | 2 |
242-0447 Valve Mechanism Gp
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
212-8926 Valve Mechanism Gp
| 13***81 | Lifter Group-Valve; -Mechanism | 3 |
| 21***26 | Valve Mechanism Group | 1 |
| 21***09 | Bridge-Valve | 6 |
256-3830 Valve Mechanism Gp
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 19***22 | Adapter | 1 |
| 25***30 | Valve Mechanism Group | 1 |
232-3717 Valve Mechanism Gp
| 16***37 | Lifter As-Valve | 12 |
| 21***26 | Valve Mechanism Group | 1 |
| 23***17 | Valve Mechanism Group | 1 |
Braking System
249-3860 Accumulator Gp-Brake -Charged
| 10***69 | Bolt-Self-Locking; (M16x2x60-mm) | 3 |
| 11***49 | Ring-Retaining | 1 |
| 19***68 | Washer-Hard; (17.5x32x8-mm Thk) | 16 |
114-1151 Accumulator Gp-Brake -Charged
| 10***69 | Bolt-Self-Locking; (M16x2x60-mm) | 3 |
| 11***49 | Ring-Retaining | 1 |
| 11***51 | Accumulator Group-Brake; -Charged-Brake | 1 |
249-3862 Accumulator Gp-Brake -Charged
| 12***24 | Clamp | 4 |
| 24***62 | Accumulator Group-Brake; -Charged | 1 |
| 24***80 | Control Group-Service Brake | 1 |
348-9257 Accumulator Gp-Brake -Uncharged
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 5 |
| 14***28 | Tee As-Orfs | 1 |
249-3863 Accumulator Gp-Brake -Uncharged
| 11***98 | Boot | 1 |
| 11***99 | Kit-Seal; (Brake Valve)(Service Brake Valve) | 1 |
| 24***63 | Accumulator Group-Brake; -Uncharged | 1 |
348-9255 Accumulator Gp-Brake -Charged
| 12***24 | Clamp | 4 |
| 24***80 | Control Group-Service Brake | 1 |
| 24***91 | Block | 4 |
253-8424 Brake Gp-Parking
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 5 |
| 14***28 | Tee As-Orfs | 1 |
284-5020 Brake Gp-Service -Front Tandem
| 12***23 | Bracket Assem. | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
284-5021 Brake Gp-Service -Rear Tandem
| 14***37 | Connector As | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 16***31 | Elbow As | 1 |
233-3142 Control Gp-Service Brake
| 17***93 | Kit-Seal; (Hydraulic Accumulator) | 1 |
| 19***50 | Core | 1 |
| 22***67 | Valve Group-Accumulator Charging | 1 |
249-4080 Control Gp-Service Brake
| 11***10 | Protector-Gas Valve | 1 |
| 17***93 | Kit-Seal; (Hydraulic Accumulator) | 1 |
| 19***50 | Core | 1 |
252-1810 Control Gp-Service Brake
| 11***10 | Protector-Gas Valve | 1 |
| 17***93 | Kit-Seal; (Hydraulic Accumulator) | 1 |
| 22***67 | Valve Group-Accumulator Charging | 1 |
251-2243 Lines Gp-Accumulator -Brake
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
356-4257 Lines Gp-Accumulator -Brake
| 35***57 | Lines Group-Accumulator; -Brake | 1 |
| 5P***01 | Seal-O-Ring; (29.74mm Id)(Pump To Fitting As) | 1 |
| 5P***15 | Seal-O-Ring; (37.46mm Id)(Connector To Pump Gp) | 1 |
252-1811 Lines Gp-Accumulator -Brake
| 11***51 | Accumulator Group-Brake; -Charged-Brake | 1 |
| 25***11 | Lines Group-Accumulator; -Brake | 1 |
255-1250 Lines Gp-Air Tank
| 24***68 | Valve Group-Bank 5; -Front Frame | 1 |
| 24***69 | Valve Group-Bank 4; -Front Frame, Rear | 1 |
| 25***50 | Lines Group-Air Tank | 1 |
250-1176 Lines Gp-Air Tank
| 24***68 | Valve Group-Bank 5; -Front Frame | 1 |
| 24***98 | Valve Group-Bank 3; -Front Frame, Rear | 1 |
| 25***76 | Lines Group-Air Tank | 1 |
356-4256 Lines Gp-Service Brake
| 24***95 | Valve Group-Bank 6; -Front Frame | 1 |
| 24***98 | Valve Group-Bank 3; -Front Frame, Rear | 1 |
| 29***74 | Control Group-Electrohydraulic | 1 |
271-5397 Lines Gp-Service Brake
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 24***94 | Valve Group-Bank 6; -Front Frame | 1 |
| 24***98 | Valve Group-Bank 3; -Front Frame, Rear | 1 |
236-8922 Tank Gp-Air
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***22 | Tank Group-Air | 1 |
| 24***69 | Valve Group-Bank 4; -Front Frame, Rear | 1 |
Cooling System
188-3826 Cooler Gp-Engine Oil
| 18***26 | Cooler Group-Engine Oil | 1 |
| 19***82 | Washer-Hard; (26x47x12-mm Thk) | 4 |
| 23***11 | Aftercooler Group-Air | 1 |
117-3643 Cooler Gp-Engine Oil
| 11***43 | Cooler Group-Engine Oil | 1 |
| 20***93 | Gasket | 1 |
| 29***67 | Core As-Oil Cooler; (Engine) | 1 |
268-6570 Cooling Ar
| 14***11 | Plug Group | 2 |
| 20***57 | Elbow; (Inlet) | 1 |
| 20***58 | Gasket | 1 |
200-1215 Elbow Gp-Water
| 11***36 | Seal; (124.5-cm Each) | 0 |
| 13***45 | Pad; (Connector) | 1 |
| 14***39 | Connector As. | 1 |
231-2313 Fan & Motor Gp -Radiator Cooling
| 11***36 | Seal; (124.5-cm Each) | 0 |
| 14***39 | Connector As. | 1 |
| 14***60 | Elbow Group | 1 |
248-0671 Guard Gp-Fan -Radiator
| 11***23 | Regulator-Water Temperature; (97-Deg C)(Coolant) | 2 |
| 12***66 | Gasket | 1 |
| 14***95 | Plug As | 1 |
223-5548 Lines Gp-Water
| 00***64 | End; (Hose) | 1 |
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
246-6707 Lines Gp-Water
| 16***77 | Plug As | 1 |
| 22***99 | Pump Group-Water; -Coolant | 1 |
| 24***07 | Lines Group-Water | 1 |
206-4228 Lines Gp-Water -Engine
| 11***82 | Seal-O-Ring; (16.36mm Id) | 3 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 19***57 | Gasket; (Water Regulator Housing)(Temperature) | 1 |
231-2152 Lines Gp-Water
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***42 | Connector | 1 |
| 15***25 | Valve-Fluid Sampling | 1 |
197-9564 Pump Gp-Water -Coolant
| 14***88 | Seal As; (Water Pump) | 1 |
| 17***52 | Shaft As | 1 |
| 17***58 | Plug | 1 |
236-4413 Pump Gp-Water
| 14***95 | Plug As | 2 |
| 16***19 | Plug As | 1 |
| 16***95 | Elbow As | 1 |
264-1434 Pump Gp-Water
| 12***07 | Mount As-Resilient | 1 |
| 17***81 | Washer-Hard; (8.5x40x3-mm Thk) | 1 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 2 |
227-4299 Pump Gp-Water -Coolant
| 11***37 | Pulley; (8-Groove) | 1 |
| 11***25 | Filter; (Water)(Pump) | 1 |
| 12***70 | Shaft Assem. | 1 |
231-2315 Radiator Gp
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 14***44 | Spacer; (11x19x20-mm Thk) | 1 |
| 14***85 | Clip | 1 |
248-5594 Tank Gp-Coolant
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 14***44 | Spacer; (11x19x20-mm Thk) | 1 |
| 14***85 | Clip | 1 |
254-6997 Tank Gp-Coolant
| 25***97 | Tank Group-Coolant | 1 |
| 25***03 | Elbow | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
Electrical And Starting System
3e-6328 Alarm Gp
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***43 | Stator As; (Alternator) | 1 |
246-6701 Alternator Gp-Charging -Without Air Conditioner
| 12***92 | Pulley As-Idler; (8-Groove) | 1 |
| 12***37 | Support-Compressor | 1 |
| 12***40 | Support-Alternator | 1 |
253-2723 Alternator Gp-Charging -With Air Conditioner
| 12***92 | Pulley As-Idler; (8-Groove) | 1 |
| 12***96 | Pulley-Alternator | 1 |
| 14***01 | Cover-Dust; (Rear) | 1 |
247-3372 Alternator Gp-Charging -With Air Conditioner
| 12***92 | Pulley As-Idler; (8-Groove) | 1 |
| 12***96 | Pulley-Alternator | 1 |
| 14***01 | Cover-Dust; (Rear) | 1 |
246-6715 Alternator Gp-Charging -Without Air Conditioner
| 08***91 | Bolt; (M10x1.5x55-mm) | 1 |
| 12***92 | Pulley As-Idler; (8-Groove) | 1 |
| 12***96 | Pulley-Alternator | 1 |
253-2724 Alternator Gp-Charging -With Air Conditioner
| 23***54 | Control Group-Unprogrammed; (Product Link 300)(Product Link 321sr) | 1 |
| 25***24 | Alternator Group-Charging; -With Air Conditioner | 1 |
177-9953 Alternator Gp-Charging
| 12***92 | Pulley As-Idler; (8-Groove) | 1 |
| 12***37 | Support-Compressor | 1 |
| 12***40 | Support-Alternator | 1 |
275-9651 Application Gp-Communication -Product Link 300
| 13***44 | Strap Assem. | 1 |
| 15***86 | Screw; (M4x0.7x16-mm) | 4 |
| 15***10 | Battery; (12-Volt, 1400-Cca) | 2 |
236-1924 Battery & Wiring Gp -Heavy-Duty
| 23***24 | Battery & Wiring Group; -Heavy-Duty | 1 |
| 25***00 | Wiring Group-Camera; -Work Area Visual System | 1 |
| 27***68 | Display Group-Camera; -Work Area Visual System | 1 |
233-4611 Battery & Wiring Gp -Extreme Service
| 13***44 | Strap Assem. | 1 |
| 15***86 | Screw; (M4x0.7x16-mm) | 4 |
| 15***00 | Battery; -Maintenance Free | 2 |
278-1842 Camera Ar -Work Area Visual System
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 14***92 | Stud; (M8x1.25-Thd) | 4 |
| 22***73 | Control Group-Engine Electronic | 1 |
334-3855 Control & Mtg Gp-Engine Elek
| 27***69 | Control Group-Unprogrammed; -Implement 2 | 1 |
| 27***70 | Control Group-Unprogrammed; -Implement 1 | 1 |
| 32***76 | Bracket | 1 |
246-9365 Control & Mtg Gp-Engine Elek
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 14***92 | Stud; (M8x1.25-Thd) | 4 |
| 22***73 | Control Group-Engine Electronic | 1 |
246-9345 Control & Mtg Gp-Engine Elek
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 14***92 | Stud; (M8x1.25-Thd) | 4 |
| 22***73 | Control Group-Engine Electronic | 1 |
233-3145 Control & Mtg Gp-Implement
| 23***45 | Control & Mtg Group-Implement | 1 |
| 26***78 | Control Group-Unprogrammed; (Engine) | 1 |
226-7473 Control Gp-Engine Electronic
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 22***09 | Screw-Truss Head; (M4x0.7x14-mm) | 3 |
299-0875 Control Gp-Implement -Front Lift
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 22***09 | Screw-Truss Head; (M4x0.7x14-mm) | 3 |
299-0876 Control Gp-Implement
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***09 | Knob-Control | 2 |
238-8808 Control Gp-Power Train -All Wheel Drive
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 23***08 | Control Group-Power Train; -All Wheel Drive | 1 |
275-8970 Control Gp-Unprogrammed -Implement 1
| 17***31 | Screw; (Truss Head) (M4x0.7x12mm) | 4 |
| 18***79 | Converter-Power; (20-Ampere)(24-Volt To 12-Volt) | 1 |
| 27***70 | Control Group-Unprogrammed; -Implement 1 | 1 |
239-9954 Control Gp-Unprogrammed -Product Link 300
| 23***54 | Control Group-Unprogrammed; (Product Link 300)(Product Link 321sr) | 1 |
| 30***87 | Control Group-Unprogrammed; (Transmission) | 1 |
275-8969 Control Gp-Unprogrammed -Implement 2
| 27***69 | Control Group-Unprogrammed; -Implement 2 | 1 |
| 30***87 | Control Group-Unprogrammed; (Transmission) | 1 |
233-3135 Converter Gp-Electrical
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 23***35 | Converter Group-Electrical | 1 |
233-3134 Converter Gp-Electrical -Radio
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 17***31 | Screw; (Truss Head) (M4x0.7x12mm) | 4 |
262-1421 Electronics Gp-Communication -Product Link 300
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
262-2043 Electronics Gp-Communication -Product Link 300
| 26***43 | Electronics Group-Communication; -Product Link 300 | 1 |
| 35***17 | Software Group-Implement | 1 |
| 35***18 | Service Group-Implement | 1 |
250-9258 Electronics Gp-Implement -Implement 2
| 25***58 | Electronics Group-Implement; -Implement 2 | 1 |
| 34***67 | Software Group-Implement | 1 |
| 34***88 | Service Group-Implement | 1 |
250-9257 Electronics Gp-Implement
| 25***57 | Electronics Group-Implement | 1 |
| 34***67 | Software Group-Implement | 1 |
| 34***88 | Service Group-Implement | 1 |
250-9259 Electronics Gp-Implement -Implement 3
| 25***59 | Electronics Group-Implement; -Implement 3 | 1 |
| 35***16 | Software Group-Monitor; (Messenger) | 1 |
| 35***17 | Service Group-Monitor | 1 |
302-0359 Electronics Gp-Monitor -Danish, English, Finnish, Norwegian, Portuguese, Swedish
| 30***59 | Electronics Group-Monitor; -Danish, English, Finnish, Norwegian, Portuguese, Swedish | 1 |
| 35***20 | Software Group-Monitor | 1 |
| 35***21 | Service Group-Monitor | 1 |
302-0361 Electronics Gp-Monitor -Arabic, Chinese, English, Portuguese, Russian
| 30***61 | Electronics Group-Monitor; -Arabic, Chinese, English, Portuguese, Russian | 1 |
| 35***24 | Software Group-Monitor | 1 |
| 35***25 | Service Group-Monitor | 1 |
275-9650 Electronics Gp-Monitor -Messenger
| 27***50 | Electronics Group-Monitor; -Messenger | 1 |
| 35***18 | Software Group-Monitor | 1 |
| 35***19 | Service Group-Monitor | 1 |
302-0360 Electronics Gp-Monitor -English, Greek, Hebrew, Italian, Portuguese, Turkish
| 30***60 | Electronics Group-Monitor; -English, Greek, Hebrew, Italian, Portuguese, Turkish | 1 |
| 35***22 | Software Group-Monitor | 1 |
| 35***23 | Service Group-Monitor | 1 |
302-0362 Electronics Gp-Monitor -English, Portuguese, Romanian, Slovenian
| 30***62 | Electronics Group-Monitor; -English, Portuguese, Romanian, Slovenian | 1 |
| 33***48 | Software Group-Power Train | 1 |
| 33***49 | Service Group-Power Train | 1 |
250-9254 Electronics Gp-Monitor -Dutch, English, French, German, Portuguese, Spanish
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 30***69 | Control Group-Unprgmed Monitor; -Messenger | 1 |
310-3221 Electronics Gp-Power Train
| 23***83 | Wiring Group-Grade Control; -Accugrade | 1 |
| 30***55 | Grade Control Group; -Accugrade | 1 |
| 31***21 | Electronics Group-Power Train | 1 |
250-9260 Electronics Gp-Power Train -All Wheel Drive
| 25***60 | Electronics Group-Power Train; -All Wheel Drive | 1 |
| 35***19 | Software Group-Power Train | 1 |
| 35***20 | Service Group-Power Train | 1 |
321-4247 Grade Control Ar -All Wheel Drive
| 28***60 | Power Supply Group; -Grade Control | 1 |
| 31***23 | Panel Group-Control; -Accugrade, Lh | 1 |
| 31***17 | Panel Group-Control; -Accugrade, Rh | 1 |
307-0155 Grade Control Gp -Accugrade
| 30***55 | Grade Control Group; -Accugrade | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 2 |
297-6867 Ground Gp-Electrical
| 24***27 | Element As-Jacket Water Heater; (240-Volt, 1000-Watt) | 1 |
| 24***30 | Cord As-Heater | 1 |
| 29***67 | Ground Group-Electrical | 1 |
9x-3294 Heater Gp-Jacket Water
| 12***09 | Cord As-Heater Element; -240-Volt | 1 |
| 13***17 | Cap As-Dust | 1 |
| 24***08 | Element As-Jacket Water Heater; (240-Volt, 1250-Watt) | 1 |
332-1543 Heater Gp-Jacket Water
| 32***11 | Element As-Jacket Water Heater; (240-Volt, 1000-Watt) | 1 |
| 33***43 | Heater Group-Jacket Water | 1 |
| 4F***52 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 1 |
3t-8724 Heater Gp-Jacket Water
| 24***28 | Element As-Jacket Water Heater; (120-Volt, 1000-Watt) | 1 |
| 24***31 | Cord As-Heater | 1 |
| 3T***24 | Heater Group-Jacket Water | 1 |
332-1544 Heater Gp-Jacket Water
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Cover-Connector; (Wire Router) | 1 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
249-5511 Heater Gp-Jacket Water
| 24***11 | Heater Group-Jacket Water | 1 |
| 32***10 | Element As-Jacket Water Heater; (120-Volt, 1000-Watt) | 1 |
| 4F***52 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 1 |
329-7021 Heater Gp-Jacket Water
| 32***11 | Element As-Jacket Water Heater; (240-Volt, 1000-Watt) | 1 |
| 32***21 | Heater Group-Jacket Water | 1 |
| 4F***52 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 1 |
329-7022 Heater Gp-Jacket Water
| 32***10 | Element As-Jacket Water Heater; (120-Volt, 1000-Watt) | 1 |
| 32***22 | Heater Group-Jacket Water | 1 |
| 4F***52 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 1 |
235-6188 Installation Ar-Communication -Product Link 321sr
| 23***88 | Installation Ar-Communication; -Product Link 321sr | 1 |
| 25***47 | Grommet | 1 |
| 26***53 | Film-Warning; (Product Link, Read Omm) | 1 |
313-6837 Installation Gp-Communication -Product Link
| 23***26 | Lamp Group-Flood; -Low | 2 |
| 28***19 | Switch As-Rocker; (24-Volt) | 1 |
| 29***16 | Mounting Group-Lamp | 1 |
233-3126 Installation Gp-Lighting
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
238-8827 Installation Gp-Security
| 13***00 | Clip; (Tab) | 1 |
| 23***95 | Bracket As | 1 |
| 23***36 | Switch As-Rocker; (Warning Beacon)(24-Volt, Rotating Beacon) | 1 |
310-2078 Installation Gp-Warning Beacon
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 26***46 | Lens | 1 |
233-3127 Installation Gp-Warning Beacon
| 23***27 | Installation Group-Warning Beacon | 1 |
| 23***36 | Switch As-Rocker; (Warning Beacon)(24-Volt, Rotating Beacon) | 1 |
| 28***57 | Lamp Group-Warning Beacon; -Amber, Strobe | 1 |
261-1502 Lamp Gp
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 26***02 | Lamp Group | 1 |
3e-6389 Lamp Gp-Dome -With Switch
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
233-4620 Lamp Gp-Flood
| 13***00 | Clip; (Tab) | 2 |
| 23***20 | Lamp Group-Flood; -Ripper | 1 |
| 26***13 | Bracket As | 2 |
283-8145 Lamp Gp-Flood -Hid
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***92 | Body Assem. | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
315-1251 Lamp Gp-Flood -Cab Roof, Rear
| 22***74 | Bezel; (Hid) | 1 |
| 29***60 | Lamp; (24-Volt, Hid) | 1 |
| 29***39 | Bracket | 1 |
234-4325 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***11 | Lens As | 1 |
| 23***25 | Lamp Group-Flood; -Suspended Mount | 1 |
219-6488 Lamp Gp-Flood
| 21***88 | Lamp Group-Flood; -Cab Roof, Front | 1 |
| 23***25 | Lamp Group-Flood; -Suspended Mount | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
319-7380 Lamp Gp-Flood -Hid
| 22***74 | Bezel; (Hid) | 1 |
| 29***60 | Lamp; (24-Volt, Hid) | 1 |
| 29***39 | Bracket | 1 |
233-4621 Lamp Gp-Flood -Hid
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***21 | Lamp Group-Flood; -Hid | 1 |
234-4326 Lamp Gp-Flood
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 22***74 | Bezel; (Hid) | 1 |
| 23***26 | Lamp Group-Flood; -Low | 1 |
319-7381 Lamp Gp-Flood -Hid
| 30***29 | Bracket-Light | 1 |
| 31***81 | Lamp Group-Flood; -Hid | 1 |
| 3E***54 | Bolt; (M8x1.25x20-mm) | 1 |
319-7379 Lamp Gp-Flood -Hid
| 22***74 | Bezel; (Hid) | 1 |
| 29***60 | Lamp; (24-Volt, Hid) | 1 |
| 29***43 | Lens | 1 |
290-5749 Lamp Gp-Head
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 2 |
259-9287 Lamp Gp-Head & Signal -Lh
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
259-9288 Lamp Gp-Head & Signal -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
344-3460 Lamp Gp-Head & Signal -Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 34***60 | Lamp Group-Head & Signal; -Lh | 1 |
344-3459 Lamp Gp-Head & Signal -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
212-3924 Lamp Gp-Marker
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 21***24 | Lamp Group-Marker; -Roading | 1 |
259-0134 Lamp Gp-Registration Plate
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***34 | Lamp Group-Registration Plate; -European Market | 1 |
233-4631 Lamp Gp-Registration Plate -Eame
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***31 | Lamp Group-Registration Plate; -Eame | 1 |
334-8049 Lamp Gp-Signal -Stop, Tail
| 23***25 | Lamp Group-Flood; -Suspended Mount | 2 |
| 24***52 | Bracket As | 2 |
| 33***49 | Lamp Group-Signal; -Stop, Tail | 1 |
135-0426 Lamp Gp-Signal -Stop, Tail
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***26 | Lamp Group-Signal; (24-Volt, Stop, Tail)(Stop/Tail) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
201-5464 Lamp Gp-Signal -Turn
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 20***64 | Lamp Group-Signal; -Turn | 1 |
199-3368 Lamp Gp-Signal
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 19***68 | Lamp Group-Signal; -Turn | 1 |
284-3757 Lamp Gp-Warning Beacon -Amber, Strobe
| 28***19 | Switch As-Rocker; (24-Volt) | 1 |
| 28***57 | Lamp Group-Warning Beacon; -Amber, Strobe | 1 |
| 29***16 | Mounting Group-Lamp | 1 |
235-3937 Lamp Gp-Warning Beacon -Amber, Rotating
| 13***00 | Clip; (Tab) | 2 |
| 23***37 | Lamp Group-Warning Beacon; -Amber, Rotating | 1 |
| 24***52 | Bracket As | 2 |
286-7910 Lighting Gp-Flood -Cab, Front, Hid, Rh, Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 22***21 | Plate As | 4 |
291-4038 Lighting Gp-Flood -Cab Roof
| 23***24 | Switch Group-Roading | 1 |
| 23***10 | Mounting Group-Lighting | 1 |
| 23***23 | Wiring Group-Rear Lighting; -Stop, Tail, Turn, Backup | 1 |
233-4616 Lighting Gp-Flood -Front Frame
| 13***00 | Clip; (Tab) | 2 |
| 23***16 | Lighting Group-Flood; -Front Frame | 1 |
| 28***28 | Sensor, Sensor; Speed Sensor, Plate | 2 |
291-4039 Lighting Gp-Flood -Cab
| 23***24 | Switch Group-Roading | 1 |
| 23***23 | Wiring Group-Rear Lighting; -Stop, Tail, Turn, Backup | 1 |
| 23***24 | Mounting Group-Lighting; -Snow Removal | 1 |
233-4615 Lighting Gp-Flood
| 23***15 | Lighting Group-Flood; -Front Frame | 1 |
| 23***25 | Lamp Group-Flood; -Suspended Mount | 2 |
| 28***28 | Sensor, Sensor; Speed Sensor, Plate | 2 |
286-7909 Lighting Gp-Flood -Cab
| 24***80 | Switch As-Rocker; (Side Floodlight) | 1 |
| 28***09 | Lighting Group-Flood; -Cab, Front, Rh, Lh | 1 |
| 31***79 | Lamp Group-Flood; -Hid | 2 |
235-6199 Lighting Gp-Flood -Hid, Snow Wing
| 21***88 | Lamp Group-Flood; -Cab Roof, Front | 2 |
| 23***99 | Lighting Group-Flood; -Hid, Snow Wing | 1 |
| 24***80 | Switch As-Rocker; (Side Floodlight) | 1 |
277-9409 Lighting Gp-Roading -Position Lamp, Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 15***70 | Guard Group-Lighting; (Rotating Beacon) | 2 |
298-7465 Lighting Gp-Roading -Snow Removal
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 4 |
| 28***88 | Plate | 2 |
| 28***93 | Block | 4 |
298-7463 Lighting Gp-Roading
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 29***63 | Lighting Group-Roading | 1 |
| 9W***52 | Pin-Connector; (14-Ga To 16-Ga) | 2 |
286-4435 Lighting Gp-Warning Beacon
| 11***58 | Washer; (6.5x17x1-mm Thk) | 1 |
| 28***35 | Lighting Group-Warning Beacon | 1 |
| 29***15 | Plate As | 1 |
170-5335 Motor Gp-Electric -Circulating Fan
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***00 | Clip; (Tab) | 2 |
298-3643 Mounting Gp-Grade Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***00 | Clip; (Tab) | 2 |
290-2016 Mounting Gp-Lamp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***73 | Screw-Button Head; (10-32x0.75-In) | 6 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
233-4610 Mounting Gp-Lighting
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 23***10 | Mounting Group-Lighting | 1 |
| 24***53 | Plug As | 1 |
233-4624 Mounting Gp-Lighting -Snow Removal
| 22***69 | Module As-Power Supply | 1 |
| 23***24 | Mounting Group-Lighting; -Snow Removal | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
280-8969 Panel Gp-Circuit Breaker
| 28***69 | Panel Group-Circuit Breaker | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
235-8200 Plug Gp-Connector -Engine Harness, Protective Cover
| 16***61 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
| 18***63 | Plug Group | 1 |
283-7960 Power Supply Gp -Grade Control
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 23***12 | Sensor Group-Temperature; -Coolant, Water | 1 |
| 23***13 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 16***61 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
| 18***63 | Plug Group | 1 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 33***45 | Radio Group-Communication; -Product Link 121sr | 1 |
330-6034 Sensor Gp-Engine
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 33***34 | Sensor Group-Engine | 1 |
330-6038 Sensor Gp-Engine
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 33***38 | Sensor Group-Engine | 1 |
297-5355 Sensor Gp-Engine
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 29***55 | Sensor Group-Engine | 1 |
219-2392 Sensor Gp-Position
| 16***03 | Sensor Group-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 21***92 | Sensor Group-Position | 1 |
266-1467 Sensor Gp-Position -Rotary
| 16***05 | Sensor As-Pressure; (Unfiltered Engine Oil) | 1 |
| 26***67 | Sensor Group-Position; -Brake Pedal | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
237-0957 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***27 | Plug As-Connector; (3-Pin) | 1 |
| 23***57 | Sensor Group-Pressure | 1 |
214-6863 Sensor Gp-Pressure
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
| 21***63 | Sensor Group-Pressure | 1 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
210-1747 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 9X***13 | Sleeve (Order By cm)(Use As Required) | 0 |
266-8650 Sensor Gp-Pressure
| 13***60 | Bracket | 1 |
| 13***45 | Pad; (Connector) | 1 |
| 26***50 | Sensor Group-Pressure; -Intake Manifold Air | 1 |
194-6722 Sensor Gp-Pressure
| 16***04 | Sensor Group-Pressure; (Turbocharger Outlet) | 1 |
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
197-8394 Sensor Gp-Pressure
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 21***67 | Seal-O-Ring | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
236-6220 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 23***20 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 24***69 | Sensor Group-Pressure | 1 |
276-9067 Sensor Gp-Pressure
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 2 |
239-2396 Sensor Gp-Pressure
| 23***96 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
| 29***60 | Sensor Group-Pressure | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
303-3357 Sensor Gp-Pressure
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
| 30***57 | Sensor Group-Pressure; -Atmospheric, . Spring | 1 |
| 6V***09 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
224-4536 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 27***93 | Sensor Group-Pressure; (Water Jacket Outlet) | 1 |
267-1402 Sensor Gp-Pressure
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 26***02 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
194-6725 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
197-8393 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***27 | Harness As-Sensor; (14-Ga Wire)(Engine Oil Temperature) | 3 |
191-8303 Sensor Gp-Speed
| 19***03 | Sensor Group-Speed | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
236-6221 Sensor Gp-Speed -Engine Timing
| 13***45 | Pad; (Connector) | 1 |
| 23***21 | Sensor Group-Speed; -Engine Timing | 1 |
| 23***80 | Seal-O-Ring | 1 |
234-5013 Sensor Gp-Temperature
| 23***13 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
| 23***34 | Valve Group-Ether Starting | 1 |
191-6587 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 19***87 | Sensor Group-Temperature; -High Pressure Oil | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
274-7395 Sensor Gp-Temperature
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 5 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
| 27***95 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
234-5012 Sensor Gp-Temperature
| 1U***46 | Sealant (For Locations A) | 0 |
| 23***12 | Sensor Group-Temperature; -Coolant, Water | 1 |
| 23***16 | Heater As; (Starting Aid) | 1 |
274-7396 Sensor Gp-Temperature
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
| 20***56 | Starting Motor Group-Electric; (24-Volt) | 1 |
238-3215 Starting Aid Gp -Air Inlet Manifold
| 23***15 | Starting Aid Group; -Air Inlet Manifold | 1 |
| 24***13 | Bar As; (Rh) | 1 |
| 24***14 | Bar As; (Lh) | 1 |
238-9561 Starting Aid Gp-Ether
| 09***37 | Spacer; (12-mm Thk) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***58 | Bearing | 2 |
207-1556 Starting Motor Gp-Electric
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 20***56 | Starting Motor Group-Electric; (24-Volt) | 1 |
248-0716 Starting Motor Gp-Electric
| 24***16 | Starting Motor Group-Electric | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
238-8825 Support Gp-Light -Cab Roof
| 23***25 | Support Group-Light; -Cab Roof | 1 |
| 24***88 | Switch As-Rocker; (Work Light) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
| 4L***99 | Washer; (0.38x0.88x0.06-In Thk) | 2 |
238-8809 Switch Gp-All Wheel Drive
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 3 |
164-7577 Switch Gp-Bypass
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
238-8763 Switch Gp-Light -Work Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 23***63 | Switch Group-Light; -Work Light | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 2 |
171-3759 Switch Gp-Limit
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***59 | Switch Group-Limit; -Brake Pedal, Xmsn Mdl Cont | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
209-5582 Switch Gp-Magnetic
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
| 23***16 | Switch As-Rocker; (Hazard) | 1 |
| 24***79 | Switch As-Rocker; (24-Volt)(Headlight Dimmer) | 1 |
125-1302 Switch Gp-Magnetic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
179-0006 Switch Gp-Magnetic
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***06 | Switch Group-Magnetic; -Hydraulic Tank Fill Pump/Motor Relay | 1 |
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
241-8368 Switch Gp-Magnetic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
| 24***78 | Switch As-Rocker; (Autoshift) | 1 |
258-0883 Switch Gp-Pressure
| 24***87 | Switch As-Rocker; (Blade Cushion) | 1 |
| 25***83 | Switch Group-Pressure; -Fuel Filter, Differential-Fuel Filter | 1 |
275-1253 Switch Gp-Pressure
| 23***30 | Switch As-Rocker; (Heated Mirrors) | 1 |
| 27***53 | Switch Group-Pressure; -Fuel Filter-Fuel | 1 |
| 29***60 | Relay As; (24-Vdc, 20-Ampere) | 1 |
233-3124 Switch Gp-Roading
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 23***24 | Switch Group-Roading | 1 |
321-6987 Switch Gp-Rocker
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 32***87 | Switch Group-Rocker; -Blade Cushion | 1 |
| 35***89 | Filter; (Ether Start) | 1 |
238-8824 Switch Gp-Rocker -Autoshift
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 23***24 | Switch Group-Rocker; -Autoshift | 1 |
| 27***41 | Switch Group-Wiper; -Intermittent-Front, Rear | 1 |
343-1824 Switch Gp-Rocker -Heated Mirrors
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 21***00 | Back-Up Alarm Assem. | 1 |
| 34***24 | Switch Group-Rocker; -Heated Mirrors | 1 |
275-7764 Switch Gp-Wiper -Intermittent
| 09***24 | Plug-Button | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 36 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
275-7741 Switch Gp-Wiper -Intermittent
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 11 |
239-1134 Valve Gp-Ether Starting
| 09***24 | Plug-Button | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 52 |
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
257-7224 Warning Gp-Backup
| 16***69 | Spacer; (7x11x8.4-mm Thk) | 4 |
| 25***60 | Camera Group; (115-Deg, Color)(Rear View) | 1 |
| 25***62 | Kit-Bracket; (Camera) | 1 |
233-4613 Wiring Gp-Auxiliary -Front
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Cover-Connector; (Wire Router) | 2 |
| 14***45 | Plug As-Connector; (70-Pin) | 1 |
319-8714 Wiring Gp-Cab
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***97 | Mount-Wire Tie | 5 |
291-2910 Wiring Gp-Cab
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
252-8000 Wiring Gp-Camera -Work Area Visual System
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 08***91 | Bolt; (M10x1.5x55-mm) | 3 |
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 8 |
238-8828 Wiring Gp-Electronic Control -Hydraulic Implement
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 08***91 | Bolt; (M10x1.5x55-mm) | 3 |
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 8 |
330-6021 Wiring Gp-Engine
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 09***24 | Bolt; (M12x1.75x80-mm) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
276-4107 Wiring Gp-Engine
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
330-6017 Wiring Gp-Engine Electronic
| 13***43 | Boot; (Red)(Red) | 1 |
| 21***15 | Harness As-Heater; (Starting Aid) | 1 |
| 33***17 | Wiring Group-Engine Electronic | 1 |
335-9433 Wiring Gp-Fan -Cold Weather
| 17***13 | Ring-Terminal | 1 |
| 20***77 | Bolt-Flange Head; (M8x1x25-mm) | 2 |
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
233-4600 Wiring Gp-Front
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 13***43 | Boot; (Red)(Red) | 1 |
| 20***77 | Bolt-Flange Head; (M8x1x25-mm) | 2 |
239-6383 Wiring Gp-Grade Control -Accugrade
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
| 15***74 | Kit-Connecting Plug; (6-Pin)(Cat Electronic Display Harness) | 1 |
| 23***83 | Wiring Group-Grade Control; -Accugrade | 1 |
233-3288 Wiring Gp-Grade Control -Cab
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 14 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 2 |
275-0596 Wiring Gp-Heater
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 14***60 | Strap As; (Ground) | 1 |
| 14***44 | Spacer; (11x19x20-mm Thk) | 1 |
269-3410 Wiring Gp-Heater -Air Inlet Manifold
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 03***32 | Rod End | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
259-3131 Wiring Gp-Heater -Air Inlet Heater Relay
| 14***60 | Strap As; (Ground) | 1 |
| 14***44 | Spacer; (11x19x20-mm Thk) | 2 |
| 15***47 | Cable-Electrical; (0-Ga, Red)(77-cm) | 0 |
292-1874 Wiring Gp-Lighting -Work Lights
| 14***44 | Spacer; (11x19x20-mm Thk) | 1 |
| 15***49 | Cable-Electrical; (03050 mm ) | 0 |
| 15***50 | Cable; (00-Ga, Black)(183-cm Each) | 0 |
262-4972 Wiring Gp-Lighting -Marker Lights
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 03***32 | Rod End | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
291-2909 Wiring Gp-Lighting -Floodlights, Warning Beacon
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 03***32 | Rod End | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 7 |
269-4152 Wiring Gp-Power Receptacle
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 14***44 | Spacer; (11x19x20-mm Thk) | 1 |
352-1597 Wiring Gp-Rear
| 14***44 | Spacer; (11x19x20-mm Thk) | 1 |
| 15***49 | Cable-Electrical; (03050 mm ) | 0 |
| 17***06 | Switch Group-Magnetic; -Hydraulic Tank Fill Pump/Motor Relay | 1 |
233-4602 Wiring Gp-Rear -Circuit Breaker Panel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
| 11***18 | Clip | 2 |
264-7522 Wiring Gp-Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
| 11***18 | Clip | 2 |
352-1596 Wiring Gp-Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
| 11***18 | Clip | 2 |
233-4601 Wiring Gp-Rear -Main
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
| 11***18 | Clip | 2 |
233-4623 Wiring Gp-Rear Lighting -Stop, Tail, Turn, Backup
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
247-6430 Wiring Gp-Rear Lighting -Tail
| 24***30 | Wiring Group-Rear Lighting; -Tail | 1 |
| 26***98 | Axle Group-Front; -All Wheel Drive | 1 |
| 29***21 | Mounting Group-Axle; -Front | 1 |
269-4150 Wiring Gp-Secondary Steering
| 14***42 | Bearing-Sleeve | 2 |
| 19***68 | Washer-Hard; (17.5x32x8-mm Thk) | 4 |
| 25***99 | Pin | 4 |
296-5909 Wiring Gp-Sensor -Awd, Steering Cylinder Position
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
| 19***42 | Shim; (2.65-mm Thk) | 1 |
| 19***69 | Washer; (22x40x10-mm Thk) | 48 |
235-6194 Wiring Gp-Sensor -All Wheel Drive
| 11***21 | Lug; (M10x1.5-Thd) | 2 |
| 13***28 | Bearing-Sleeve | 2 |
| 23***94 | Wiring Group-Sensor; -All Wheel Drive | 1 |
323-5169 Wiring Gp-Sensor -Cold Weather
| 13***98 | Spring | 1 |
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
Engine Arrangement
351-5681 Conversion Ar-Engine
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
| 18***49 | Cover Group-Cylinder Block; -Rear | 1 |
| 18***06 | Seal Group-Crankshaft | 1 |
231-0878 Engine Ar-Complete
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
| 18***49 | Cover Group-Cylinder Block; -Rear | 1 |
| 18***06 | Seal Group-Crankshaft | 1 |
349-4444 Engine Ar-Complete
| 11***43 | Cooler Group-Engine Oil | 1 |
| 16***46 | Housing Group-Front | 1 |
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
351-0371 Engine Ar-Complete
| 16***06 | Cylinder Block Group | 1 |
| 16***48 | Crankshaft Group | 1 |
| 18***26 | Cooler Group-Engine Oil | 1 |
351-0372 Engine Ar-Core
| 23***22 | Tank Group-Air | 1 |
| 24***19 | Air Compressor Group | 1 |
| 25***50 | Lines Group-Air Tank | 1 |
231-0879 Engine Ar-Core
| 23***79 | Engine Ar-Core | 1 |
| 23***22 | Tank Group-Air | 1 |
| 24***65 | Air Compressor Group | 1 |
Frame And Body
238-1916 Cover Gp-Control Valve
| 09***49 | Bolt; (M8x1.25x40-mm) | 10 |
| 19***74 | Film-Stripe; (Yellow, Reflective)(Fender) | 2 |
| 23***16 | Cover Group-Control Valve | 1 |
290-3527 Cover Gp-Protection
| 25***28 | Frame & Mounting As | 1 |
| 29***27 | Cover Group-Protection | 1 |
| 31***26 | Pin | 1 |
312-5959 Cover Gp-Protection -All Wheel Drive
| 05***88 | Washer; (13.5x30x3-mm Thk) | 4 |
| 28***16 | Frame As | 1 |
| 31***59 | Cover Group-Protection; -All Wheel Drive | 1 |
288-8989 Enclosure Gp-Engine
| 28***89 | Enclosure Group-Engine | 1 |
| 32***34 | Plate | 2 |
| 33***81 | Plate | 2 |
288-8988 Enclosure Gp-Engine
| 25***69 | Support As | 1 |
| 28***88 | Enclosure Group-Engine | 1 |
| 29***48 | Guard As | 1 |
242-2452 Fender & Support Gp -Rear
| 24***52 | Fender & Support Group; -Rear | 1 |
| 32***30 | Plate | 2 |
| 32***33 | Plate | 2 |
262-0413 Fender & Support Gp -Rear
| 19***18 | Turnbuckle | 44 |
| 25***57 | Cover; (Top) | 1 |
| 25***58 | Cover; (Door, Rh) | 1 |
262-0412 Fender & Support Gp -Front
| 23***51 | Screw-Button Head; (M10x1.5x25-mm) | 4 |
| 26***12 | Fender & Support Group; -Front | 1 |
| 29***66 | Plate | 2 |
246-6350 Frame Gp-Front
| 14***56 | Bearing-Tapered Roller | 1 |
| 24***50 | Frame Group-Front | 1 |
| 25***90 | Bearing-Sleeve | 1 |
289-1417 Frame Gp-Rear
| 10***75 | Bolt; (M20x2.5x60-mm) | 2 |
| 26***93 | Hitch As | 1 |
| 26***06 | Washer-Hard; (26x44x4-mm Thk) | 6 |
285-8739 Guard Gp-Bottom
| 20***09 | Door Group-Access; (Breakers, 24-Volt Outlet) | 1 |
| 20***66 | Latch As | 1 |
| 21***36 | Door As | 1 |
333-1276 Guard Gp-Brake -Tandem
| 29***02 | Hose As | 1 |
| 2Y***82 | Elbow | 1 |
| 30***10 | Hose As | 1 |
333-1275 Guard Gp-Brake -Tandem
| 1V***84 | Hinge | 1 |
| 20***09 | Door Group-Access; (Breakers, 24-Volt Outlet) | 1 |
| 20***70 | Lock Group-Cylinder; (Door Access) | 1 |
266-2423 Guard Gp-Brake Lines -Tandem
| 19***19 | Seal-Boot | 1 |
| 1D***06 | Nut-Slotted | 1 |
| 26***23 | Guard Group-Brake Lines; -Tandem | 1 |
249-6692 Guard Gp-Debris
| 11***31 | Bolt; (M24x3x120-mm) | 18 |
| 24***92 | Guard Group-Debris | 1 |
| 26***07 | Washer-Hard; (26x47x12-mm Thk) | 18 |
232-2678 Hitch Gp-Articulating
| 23***78 | Hitch Group-Articulating | 1 |
| 26***80 | Pin | 1 |
| 2G***73 | Washer; (2.031x4x0.06-In Thk) | 5 |
264-2392 Hitch Gp-Towing
| 26***92 | Hitch Group-Towing | 1 |
| 28***67 | Plate As, Bracket; Hook, Bracket, Bracket; Bracket | 1 |
| 28***68 | Plate As | 1 |
288-9588 Hood Gp -Engine
| 28***88 | Hood Group; -Engine | 1 |
| 31***66 | Plate | 2 |
288-9591 Hood Gp
| 28***91 | Hood Group | 1 |
| 31***70 | Reflector; (Amber)(Amber) | 2 |
236-8921 Lines Gp-Lubrication -Articulated Hitch Bearings
| 23***21 | Lines Group-Lubrication; -Articulation Hitch Bearing | 1 |
| 31***70 | Reflector; (Amber)(Amber) | 8 |
| 31***71 | Reflector; (Red) | 2 |
276-2954 Link Gp-Steering -All Wheel Drive
| 19***81 | Washer-Hard; (22x40x10-mm Thk) | 6 |
| 22***12 | Film; (Warning) (Jump Start) (On Outside Of Battery Compartment Door) | 1 |
| 22***13 | Film; (Warning) (Jump Start) (Inside Of Lh Battery Box Cover) | 1 |
284-5025 Mounting Gp-Axle -Rear
| 18***00 | Shim; (1.5-mm Thk) | 17 |
| 27***07 | Plate | 1 |
| 28***25 | Mounting Group-Axle; -Rear | 1 |
290-3921 Mounting Gp-Axle -Front
| 1D***91 | Bolt-Carriage; (1/2-13x2.5-In) | 8 |
| 1D***92 | Bolt-Carriage | 4 |
| 1K***72 | Locknut Horn To Guard | 12 |
233-3366 Mounting Gp-Valve -Front Frame
| 1D***91 | Bolt-Carriage; (1/2-13x2.5-In) | 8 |
| 1D***92 | Bolt-Carriage | 4 |
| 1K***72 | Locknut Horn To Guard | 12 |
311-3865 Plate As-Tie Down
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***36 | Seal; (124.5-cm Each) | 0 |
| 14***03 | Screw-Button Head; (M10x1.5x30-mm) | 12 |
278-0951 Plate Gp-Mounting -Front License Plate
| 24***15 | Insulation | 2 |
| 27***51 | Plate Group-Mounting; -Front License Plate | 1 |
| 28***86 | Insulation | 1 |
296-0012 Reflector Gp -Ripper
| 27***41 | Plate | 1 |
| 29***85 | Insulation | 1 |
| 29***86 | Insulation | 1 |
306-6511 Reflector Gp -Machine
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
231-5061 Service Center Ar
| 11***10 | Protector-Gas Valve | 1 |
| 15***36 | Valve-Gas; (Brake) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
270-6989 Shield Gp-Engine Compartment
| 15***36 | Valve-Gas; (Brake) | 1 |
| 20***58 | Seal Kit | 1 |
| 27***89 | Shield Group-Engine Compartment | 1 |
335-8336 Step Gp
| 15***36 | Valve-Gas; (Brake) | 1 |
| 20***58 | Seal Kit | 1 |
| 24***37 | Film-Warning; (High Pressure, Read Omm)(Accumulator) | 1 |
238-8758 Step Gp
| 11***10 | Protector-Gas Valve | 1 |
| 15***36 | Valve-Gas; (Brake) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
231-2316 Support Gp-Radiator
| 06***43 | Ring-Snap | 1 |
| 12***55 | Plug | 4 |
| 12***81 | Bolt-Socket Head; (M10x1.5x55-mm) | 3 |
231-5055 Suppression Gp-Sound -Engine Enclosure
| 06***43 | Ring-Snap | 1 |
| 12***55 | Plug | 4 |
| 12***81 | Bolt-Socket Head; (M10x1.5x55-mm) | 3 |
272-1540 Suppression Gp-Sound -Rear Frame
| 06***43 | Ring-Snap | 1 |
| 12***55 | Plug | 4 |
| 12***81 | Bolt-Socket Head; (M10x1.5x55-mm) | 3 |
Fuel System
281-6780 Adapter Gp-Fast Fill Fuel
| 16***65 | Bolt-Socket Head; (M4x0.7x16-mm) | 6 |
| 19***85 | Plate | 1 |
| 22***18 | Plate | 1 |
241-9585 Cover Gp-Fuel Tank -W/O Fast Fill Fuel Adapter
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
250-8313 Filter Gp-Fuel
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 25***13 | Filter Group-Fuel | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
239-5432 Filter Gp-Fuel
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 14***07 | Adapter As | 1 |
174-9570 Filter Gp-Water Sep & Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
328-2574 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
328-2585 Injector Gp-Fuel
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
236-3987 Lines Gp-Fuel
| 16***77 | Plug As | 1 |
| 16***67 | Connector As | 2 |
| 23***47 | Tube As | 1 |
250-8314 Lines Gp-Fuel
| 06***51 | Clamp | 1 |
| 14***44 | Spacer; (11x19x20-mm Thk) | 1 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 1 |
246-6706 Lines Gp-Fuel Filter
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
| 20***80 | Hose As | 1 |
| 21***06 | Tube As | 1 |
231-2148 Lines Gp-Fuel Filter
| 03***62 | Elbow, Swivel Nut 45 Degrees (-6) | 1 |
| 06***51 | Clamp | 1 |
| 14***72 | Elbow Group | 1 |
191-0461 Lines Gp-Injector Hyd Pump
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
| 1F***50 | Nut Rops Support | 4 |
| 24***42 | Stud; (M8x1.25x30-mm) | 4 |
250-8306 Mounting Gp-Fuel Filter -Fuel
| 1V***01 | Spacer; (0.546x0.840x2.38-In Thk) | 2 |
| 21***11 | Clamp | 4 |
| 21***85 | Clamp | 4 |
270-6986 Mounting Gp-Fuel Tank
| 03***50 | Elbow (Check Valve Drain Tube) | 1 |
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
| 18***99 | Connector As | 2 |
319-0622 Pump & Mtg Gp-Unit Inj Hyd
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 31***22 | Pump & Mtg Group-Unit Inj Hydraulic | 1 |
| 32***74 | Injector Group-Fuel | 1 |
254-0095 Pump & Mtg Gp-Unit Inj Hyd
| 15***36 | Cartridge | 1 |
| 17***00 | Seal; (Fuel) | 2 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
253-9725 Pump & Mtg Gp-Unit Inj Hyd
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
| 25***25 | Pump & Mtg Group-Unit Inj Hydraulic | 1 |
267-3361 Pump Gp-Fuel Injection
| 26***61 | Pump Group-Fuel Injection | 7 |
268-1839 Pump Gp-Fuel Injection
| 03***94 | Connector-Flared | 1 |
| 13***27 | Seal-O-Ring; (19.18mm Id Base Side) | 2 |
| 19***77 | Pump Group-Fuel Prm & Water Sep; -Primary Fuel Filter | 1 |
267-3362 Pump Gp-Fuel Injection
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 26***62 | Pump Group-Fuel Injection | 1 |
| 32***85 | Injector Group-Fuel | 1 |
188-6121 Pump Gp-Fuel Prm & Prim Filter -With Water Separator
| 18***21 | Pump Group-Fuel Prm & Prim Filter; -With Water Separator-Primary | 2 |
| 19***82 | Spacer; (8.5x12.7x38.2-mm Thk) | 1 |
| 19***83 | Spacer; (8.5x12.7x87.3-mm Thk) | 2 |
190-1105 Pump Gp-Fuel Prm & Water Sep
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 19***05 | Pump Group-Fuel Prm & Water Sep | 1 |
| 19***70 | Base Assembly; (Fuel Priming Pump) | 1 |
190-8977 Pump Gp-Fuel Prm & Water Sep
| 19***77 | Pump Group-Fuel Prm & Water Sep; -Primary Fuel Filter | 1 |
| 1P***82 | Flange-Half | 2 |
| 23***67 | Receiver As; (Fast Fill Fuel) | 1 |
250-9200 Receiver Gp-Fast Fill Fuel
| 19***38 | Elbow Assem. | 0 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 23***43 | Regulator Group-Fuel Pressure | 1 |
232-0343 Regulator Gp-Fuel Pressure
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 25***05 | Bushing | 1 |
| 26***43 | Elbow As | 1 |
205-1306 Regulator Gp-Fuel Pressure
| 20***06 | Name-Plate (Portuguese), Regulator Group-Fuel Pressure | 1 |
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
270-6987 Tank Gp-Fuel
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 1 |
| 14***53 | Hose; (272.2-cm) | 0 |
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
270-6988 Tank Gp-Fuel -Fast Fill
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***53 | Hose; (272.2-cm) | 0 |
| 14***72 | Sleeve-Abrasion; (.19-M Each) | 0 |
330-3563 Tank Gp-Fuel -Rh
| 25***05 | Bushing | 1 |
| 26***43 | Elbow As | 1 |
| 2T***25 | Elbow | 1 |
331-4752 Tank Gp-Fuel -Crossover
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 33***52 | Tank Group-Fuel; -Crossover | 1 |
248-4765 Tank Gp-Fuel
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 1 |
| 14***53 | Hose; (272.2-cm) | 0 |
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
330-3562 Tank Gp-Fuel -Lh
| 14***53 | Hose; (272.2-cm) | 0 |
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
| 16***65 | Bolt-Socket Head; (M4x0.7x16-mm) | 14 |
Hydraulic System
328-0899 Accumulator Gp-Blade Cushion -Uncharged
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***47 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
| 23***28 | Wiring Group-Electronic Control; -Hydraulic Implement | 1 |
348-9256 Accumulator Gp-Blade Cushion -Charged
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***47 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
| 23***28 | Wiring Group-Electronic Control; -Hydraulic Implement | 1 |
348-9258 Accumulator Gp-Blade Cushion -Uncharged
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***47 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
| 23***28 | Wiring Group-Electronic Control; -Hydraulic Implement | 1 |
219-7265 Accumulator Gp-Blade Cushion -Charged
| 21***65 | Accumulator Group-Blade Cushion; -Charged | 1 |
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***28 | Wiring Group-Electronic Control; -Hydraulic Implement | 1 |
327-8568 Accumulator Gp-Blade Cushion -Charged
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***56 | Control Group-Electrohydraulic; -Without Auxiliary Lever | 1 |
| 23***28 | Wiring Group-Electronic Control; -Hydraulic Implement | 1 |
149-5532 Accumulator Gp-Hydraulic -Uncharged
| 14***32 | Accumulator Group-Hydraulic; -Uncharged-Pilot Oil | 1 |
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***47 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
277-3796 Accumulator Gp-Hydraulic -Charged
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***56 | Control Group-Electrohydraulic; -Without Auxiliary Lever | 1 |
| 23***28 | Wiring Group-Electronic Control; -Hydraulic Implement | 1 |
249-2308 Base Gp-Oil Filter
| 23***47 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
| 23***28 | Wiring Group-Electronic Control; -Hydraulic Implement | 1 |
| 24***68 | Valve Group-Bank 5; -Front Frame | 1 |
242-5063 Control Ar-Hydraulic -Front Lift, Snow Plow
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***47 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
| 23***28 | Wiring Group-Electronic Control; -Hydraulic Implement | 1 |
242-5056 Control Ar-Hydraulic -Front Lift, Wing Mast, Wing Tilt, Ripper
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***56 | Control Group-Electrohydraulic; -Without Auxiliary Lever | 1 |
| 23***28 | Wiring Group-Electronic Control; -Hydraulic Implement | 1 |
242-6109 Control Ar-Hydraulic -Ripper, Snow Wing
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***47 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
| 23***28 | Wiring Group-Electronic Control; -Hydraulic Implement | 1 |
349-8278 Control Ar-Hydraulic -Front Lift, Ripper, Scarifier
| 14***93 | Head | 1 |
| 17***83 | Bolt-Hex Head; (M30x3.5x90mm) | 1 |
| 17***96 | Seal-O-Ring | 1 |
242-5058 Control Ar-Hydraulic -Front Lift
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***47 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
| 23***28 | Wiring Group-Electronic Control; -Hydraulic Implement | 1 |
350-2800 Control Ar-Hydraulic -Front Lift, Wing Mast, Wing Tilt, Ripper
| 13***28 | Cylinder As | 1 |
| 14***93 | Head | 1 |
| 17***83 | Bolt-Hex Head; (M30x3.5x90mm) | 1 |
349-3060 Control Ar-Hydraulic -Front Lift, Ripper, Wing Mast, Wing Tilt Float
| 16***10 | Cylinder Group-Scarifier | 1 |
| 34***60 | Control Ar-Hydraulic; -Front Lift, Ripper, Wing Mast, Wing Tilt Float | 1 |
| 5P***28 | Capscrew; (Hex Hd) (1/2-13 Unc X 1.00, Gd 8 Z) | 4 |
349-3058 Control Ar-Hydraulic -Front Lift, Wing Mast, Wing Tilt
| 13***91 | Cylinder Group-Hydraulic; -Blade Tip | 1 |
| 14***74 | Elbow As | 2 |
| 29***39 | Washer-Hard; (32.2x76.2x19.8-mm Thk) | 2 |
327-5868 Control Ar-Hydraulic -Dozer, Fr Lft, Rip, Snow Wing
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***93 | Lines Group-Hydraulic; -Plow, Bulldozer Angle | 1 |
| 23***47 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
242-6112 Control Ar-Hydraulic -Fr Lft, Dozer Angle, Ripper, Snow Plow
| 23***18 | Lines Group-Ripper | 1 |
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***93 | Lines Group-Hydraulic; -Plow, Bulldozer Angle | 1 |
349-8279 Control Ar-Hydraulic -Dozer Angle, Front Lift, Scarifier, Wing Mast, Wing Tilt
| 13***94 | Cylinder As | 1 |
| 13***95 | Rod As | 1 |
| 16***86 | Seal As-Buffer | 1 |
242-6110 Control Ar-Hydraulic -Dozer Angle, Fr Lft, Scarifier
| 23***18 | Lines Group-Ripper | 1 |
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***93 | Lines Group-Hydraulic; -Plow, Bulldozer Angle | 1 |
242-6111 Control Ar-Hydraulic -Fr Lft, Scarifier, Snow Plow
| 23***18 | Lines Group-Ripper | 1 |
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***47 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
242-6107 Control Ar-Hydraulic -Fr Lft, Ripper, Snow Plow
| 24***07 | Control Ar-Hydraulic; -Fr Lft, Ripper, Snow Plow | 1 |
| 24***95 | Valve Group-Bank 6; -Front Frame | 1 |
| 24***98 | Valve Group-Bank 3; -Front Frame, Rear | 1 |
324-6356 Control Ar-Hydraulic -Front Lift, Wing Mast, Wing Tilt, Ripper
| 23***18 | Lines Group-Ripper | 1 |
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***36 | Lines Group-Hydraulic; -Plow, Bulldozer Angle | 1 |
242-5059 Control Ar-Hydraulic -Scarifier
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***47 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
| 23***28 | Wiring Group-Electronic Control; -Hydraulic Implement | 1 |
242-5066 Control Ar-Hydraulic -Fr Lft, Wing Mast & Tlt, Rip
| 23***18 | Lines Group-Ripper | 1 |
| 24***66 | Control Ar-Hydraulic; -Fr Lft, Wing Mast & Tlt, Rip | 1 |
| 24***68 | Valve Group-Bank 5; -Front Frame | 1 |
349-3061 Control Ar-Hydraulic -Dozer Angle, Front Lift, Ripper, Wing Mast, Wing Tilt
| 10***75 | Bolt; (M20x2.5x60-mm) | 4 |
| 24***27 | Bracket | 1 |
| 24***16 | Cylinder Group-Sideshift | 1 |
349-3054 Control Ar-Hydraulic -Ripper
| 11***36 | Seal; (124.5-cm Each) | 0 |
| 14***35 | Connect Group; (Each Includes) | 2 |
| 14***57 | Elbow As. | 1 |
242-5062 Control Ar-Hydraulic -Fr Lft, Dozer Angle, Ripper
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***47 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
| 23***28 | Wiring Group-Electronic Control; -Hydraulic Implement | 1 |
242-6108 Control Ar-Hydraulic -Front Lift, Dozer Angle
| 23***18 | Lines Group-Ripper | 1 |
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 24***08 | Control Ar-Hydraulic; -Front Lift, Dozer Angle | 1 |
242-5064 Control Ar-Hydraulic -Dozer, Front Lift, Snow Wing
| 23***32 | Lines Group-Hydraulic; -With Accumulator | 1 |
| 24***64 | Control Ar-Hydraulic; -Dozer, Front Lift, Snow Wing | 1 |
| 32***87 | Switch Group-Rocker; -Blade Cushion | 1 |
242-5061 Control Ar-Hydraulic -Front Lift, Scarifier
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***47 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
| 23***28 | Wiring Group-Electronic Control; -Hydraulic Implement | 1 |
242-6146 Control Ar-Hydraulic -Fr Lft, Scarifier, Snow Plow, Dozer Angle
| 23***18 | Lines Group-Ripper | 1 |
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***93 | Lines Group-Hydraulic; -Plow, Bulldozer Angle | 1 |
327-5867 Control Ar-Hydraulic -Dozer, Fr Lft, Rip, Snow Wing
| 23***18 | Lines Group-Ripper | 1 |
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***56 | Control Group-Electrohydraulic; -Without Auxiliary Lever | 1 |
349-3062 Control Ar-Hydraulic -Dozer Angle, Front Lift, Ripper, Wing Mast, Wing Tilt Float
| 24***05 | Race-Bearing | 2 |
| 25***58 | Pin As | 2 |
| 25***81 | Spacer; (32.16x38.1x8.65-mm Thk) | 2 |
242-5057 Control Ar-Hydraulic -Ripper
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***47 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
| 23***28 | Wiring Group-Electronic Control; -Hydraulic Implement | 1 |
349-3063 Control Ar-Hydraulic -Dozer Angle, Front Lift, Ripper, Wing Mast, Wing Tilt
| 24***99 | Cylinder Group-Wheel Lean; -All Wheel Drive | 1 |
| 26***26 | Pin | 1 |
| 34***63 | Control Ar-Hydraulic; -Dozer Angle, Front Lift, Ripper, Wing Mast, Wing Tilt | 1 |
349-3057 Control Ar-Hydraulic -Front Lift, Ripper
| 11***99 | Bolt; (M24x3x80-mm) | 4 |
| 26***00 | Cylinder Group-Lift; -Blade | 2 |
| 26***49 | Cap | 2 |
349-3055 Control Ar-Hydraulic -Scarifier
| 17***93 | Bushing | 4 |
| 24***96 | Cylinder Group-Articulation | 2 |
| 2K***20 | Washer | 12 |
349-3064 Control Ar-Hydraulic -Dozer Angle, Front Lift, Ripper, Wing Mast, Wing Tilt Float
| 16***92 | Seal As-Buffer | 1 |
| 16***02 | Seal-U-Cup | 1 |
| 17***83 | Bolt-Hex Head; (M30x3.5x90mm) | 1 |
242-5060 Control Ar-Hydraulic -Front Lift, Ripper
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***56 | Control Group-Electrohydraulic; -Without Auxiliary Lever | 1 |
| 23***28 | Wiring Group-Electronic Control; -Hydraulic Implement | 1 |
309-7551 Control Ar-Hydraulic -Front Lift, Ripper, Scarifier
| 23***18 | Lines Group-Ripper | 1 |
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***36 | Lines Group-Hydraulic; -Plow, Bulldozer Angle | 1 |
349-3059 Control Ar-Hydraulic -Dozer Angle, Front Lift, Ripper
| 11***99 | Bolt; (M24x3x80-mm) | 4 |
| 26***07 | Cylinder Group-Centershift | 1 |
| 26***49 | Cap | 2 |
338-5688 Control Ar-Hydraulic -Blade Cushion
| 23***18 | Lines Group-Ripper | 1 |
| 23***20 | Lines Group-Hydraulic; -Front Lift | 1 |
| 23***47 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
360-5942 Control Ar-Hydraulic
| 11***55 | Cylinder As | 1 |
| 11***56 | Rod As | 1 |
| 17***83 | Bolt-Hex Head; (M30x3.5x90mm) | 1 |
241-8528 Cooler Gp-Hydraulic Oil
| 16***90 | Seal As-Buffer | 1 |
| 16***00 | Seal-U-Cup | 1 |
| 16***08 | Cylinder As | 1 |
8w-2913 Cylinder & Mtg Gp-Scarifier
| 12***08 | Hose-Hydraulic; (21.3-Inches) | 0 |
| 14***08 | Plug As. | 2 |
| 15***83 | Connector As | 1 |
233-7721 Cylinder & Mtg Gp-Articulation
| 15***80 | Washer-Hard; (26x44x22-mm Thk) | 1 |
| 16***90 | Seal As-Buffer | 1 |
| 16***00 | Seal-U-Cup | 1 |
263-2787 Cylinder & Mtg Gp-Blade Lift
| 10***44 | Grommet | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***38 | Head | 1 |
233-7723 Cylinder & Mtg Gp-Blade Tip
| 12***45 | Rod As | 1 |
| 17***83 | Bolt-Hex Head; (M30x3.5x90mm) | 1 |
| 17***98 | Seal-O-Ring | 1 |
263-2788 Cylinder & Mtg Gp-Centershift
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 10***96 | Motor Group-Gerotor; -Circle Drive | 1 |
| 1A***15 | Nut; (23/4x17/8-Thd) | 1 |
246-6115 Cylinder & Mtg Gp-Sideshift
| 18***64 | Valve As-Fluid Sampling; (Transmission) | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 24***15 | Cylinder & Mtg Group-Sideshift | 1 |
260-8709 Cylinder & Mtg Gp-Steering
| 13***29 | Seal-O-Ring | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 2 |
| 24***08 | Base Group-Oil Filter; -Hydraulic Tank Return | 1 |
260-8713 Cylinder & Mtg Gp-Wheel Lean
| 14***68 | Film-Identification; (Biodegradable Hydraulic Oil) | 1 |
| 26***13 | Cylinder & Mtg Group-Wheel Lean | 1 |
247-0096 Cylinder Gp-Articulation
| 10***25 | Hose Assem. | 2 |
| 10***75 | Bolt; (M20x2.5x60-mm) | 8 |
| 19***82 | Washer-Hard; (26x47x12-mm Thk) | 14 |
262-1907 Cylinder Gp-Centershift
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 2 |
| 11***66 | Connector As-Orifice; (1.6-mm) | 1 |
| 11***42 | Hose As | 1 |
131-7191 Cylinder Gp-Hydraulic
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 2 |
| 13***91 | Cylinder Group-Hydraulic; -Blade Tip | 1 |
| 14***18 | Connector As | 2 |
262-1900 Cylinder Gp-Lift -Blade
| 13***60 | Spacer; (11x19x10-mm Thk) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 15***43 | Connector As. | 2 |
113-7754 Cylinder Gp-Ripper
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 2 |
| 11***00 | Hose As | 1 |
| 11***54 | Cylinder Group-Ripper | 1 |
165-2510 Cylinder Gp-Scarifier
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 2 |
| 11***00 | Hose As | 1 |
| 13***44 | Hose As | 1 |
249-4116 Cylinder Gp-Sideshift
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 15***43 | Connector As. | 1 |
262-5766 Cylinder Gp-Steering
| 14***18 | Connector As | 3 |
| 14***74 | Elbow As | 1 |
| 18***98 | Stud; (M10x1.5x55-mm) | 1 |
249-5299 Cylinder Gp-Wheel Lean
| 14***18 | Connector As | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 14***75 | Elbow Group | 2 |
253-4677 Drive Gp-Circle
| 10***66 | Clip; (50.8mm Id) | 2 |
| 12***34 | Bracket | 1 |
| 12***08 | Hose-Hydraulic; (21.3-Inches) | 0 |
250-3507 Filter & Mtg Gp-Hydraulic
| 12***34 | Bracket | 1 |
| 12***08 | Hose-Hydraulic; (21.3-Inches) | 0 |
| 13***72 | Hose As | 1 |
249-2307 Filter Gp-Oil
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 18 |
| 10***60 | Hose As | 1 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
191-9784 Filter Gp-Oil
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
248-0443 Hydraulic Ar -All Wheel Drive
| 14***74 | Elbow As | 2 |
| 1S***18 | Clip (Large) | 1 |
| 24***43 | Hydraulic Ar; -All Wheel Drive | 1 |
275-5890 Lines & Mtg Gp-Snow Wing
| 10***67 | Fitting Group; (Union) | 2 |
| 11***51 | Washer-Hard; (20x35x1.6-mm Thk) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
231-1515 Lines Gp-Centershift Lock
| 10***67 | Fitting Group; (Union) | 4 |
| 11***51 | Washer-Hard; (20x35x1.6-mm Thk) | 4 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 4 |
324-6772 Lines Gp-Hydraulic -Snow Wing
| 10***48 | Kit-Seal; (Solenoid Valve)(Pilot Proportioning Valve) | 1 |
| 12***55 | Plug | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
231-1593 Lines Gp-Hydraulic -Plow, Bulldozer Angle
| 15***56 | Valve Group-Check; -Pilot, Differential Lock Oil | 1 |
| 18***27 | Valve Group-Solenoid | 1 |
| 20***82 | Kit-Seal; (Diverter Valve)(Hydraulic Fan Fluid Flow) | 1 |
231-1520 Lines Gp-Hydraulic -Front Lift
| 10***36 | Clip | 7 |
| 10***67 | Fitting Group; (Union) | 2 |
| 11***51 | Washer-Hard; (20x35x1.6-mm Thk) | 2 |
309-6989 Lines Gp-Hydraulic
| 24***86 | Valve Group-Solenoid; (24-Volt)(Ride Control, Lift Cyl Rod End) | 1 |
| 24***81 | Coil As | 1 |
| 25***19 | Manifold | 1 |
231-1532 Lines Gp-Hydraulic -With Accumulator
| 14***18 | Connector As | 4 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***42 | Connector Group | 1 |
231-1516 Lines Gp-Hydraulic -Without Accumulator
| 14***74 | Elbow As | 2 |
| 23***16 | Lines Group-Hydraulic; -Without Accumulator | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
231-1536 Lines Gp-Hydraulic -Plow, Bulldozer Angle
| 11***41 | Pin | 1 |
| 14***87 | Cap | 1 |
| 15***46 | Valve Group-Solenoid; -Quick Coupler | 1 |
333-1285 Lines Gp-Hydraulic Fan -Cold Weather
| 09***31 | Orifice | 1 |
| 13***45 | Seal Kit; (Includes Parts Marked J) | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 3 |
332-3942 Lines Gp-Hydraulic Fan
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 14***11 | Plug Group | 4 |
| 17***93 | Plug As | 5 |
266-3724 Lines Gp-Hydraulic Fan
| 12***40 | Seal-O-Ring | 2 |
| 13***30 | Valve Group-Relief | 1 |
| 15***45 | Elbow | 1 |
332-3941 Lines Gp-Hydraulic Fan
| 21***63 | Sensor Group-Pressure | 2 |
| 24***15 | Valve Group-Solenoid; (Reverse, Rh) | 4 |
| 25***09 | Valve Group-Shuttle; (All-Wheel Drive, Piston Motor) | 2 |
237-6423 Lines Gp-Pump -Implement, Steering
| 23***23 | Lines Group-Pump; -Implement, Steering | 1 |
| 6Y***32 | Bearing-Thrust | 1 |
| 6Y***33 | Ring-Thrust | 2 |
250-4226 Lines Gp-Ripper -Steering, Transmission
| 25***26 | Lines Group-Ripper; -Steering, Transmission | 1 |
| 27***14 | Pump Group-Gear; -Secondary Steering | 1 |
| 27***29 | Clamp | 2 |
231-1518 Lines Gp-Ripper
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 1 |
| 23***18 | Lines Group-Ripper | 1 |
| 25***37 | Pump Group-Piston; -Brake, Hydraulic Fan | 1 |
250-6181 Lines Gp-Ripper
| 11***68 | Gasket | 1 |
| 12***14 | Pump; (Secondary Steering) | 1 |
| 25***81 | Lines Group-Ripper | 1 |
351-3654 Lines Gp-Ripper
| 00***12 | Cup-Roller Bearing | 1 |
| 00***63 | Ring | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
174-2339 Lines Gp-Ripper
| 17***39 | Lines Group-Ripper; -Rear | 1 |
| 23***96 | Pump Group-Piston; -Implement, Steering | 1 |
| 8T***83 | Bolt (M12x1.75x40mm); (M12x1.75x40-mm) | 4 |
231-1531 Lines Gp-Secondary Steering
| 09***47 | Pin, Dowel | 1 |
| 12***94 | Plug; (Break Off) | 1 |
| 13***78 | Seal; (112.9mm Od) | 1 |
231-1512 Lines Gp-Steering
| 10***10 | Plate | 2 |
| 10***11 | Plate-Spacer | 2 |
| 23***12 | Lines Group-Steering | 1 |
264-2994 Lines Gp-Steering -Steering Cylinder
| 15***16 | Guide; (Ball) | 1 |
| 15***17 | Spring | 1 |
| 19***78 | Plate-Port | 1 |
246-4477 Lock Gp-Centershift
| 16***01 | Swashplate Stop | 2 |
| 1H***37 | Pin (Spring) | 2 |
| 24***77 | Lock Group-Centershift | 1 |
263-1790 Manifold Gp-Control -Implement, Steering
| 14***11 | Plug Group | 6 |
| 24***62 | Seal-Integral | 4 |
| 24***32 | Valve Group-Control; -Articulation | 1 |
251-8256 Manifold Gp-Control -Brake, Hydraulic Fan
| 17***07 | Seal | 2 |
| 17***08 | Rotor | 1 |
| 17***09 | Retainer | 1 |
254-3415 Manifold Gp-Control -Steering
| 12***98 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 13***56 | Seal-O-Ring | 1 |
| 14***28 | Elbow | 1 |
253-1320 Manifold Gp-Control
| 1P***78 | Clamp; (Hose) | 3 |
| 24***67 | Tank Group-Hydraulic | 1 |
| 25***84 | Strap As | 1 |
294-1109 Manifold Gp-Control -All Wheel Drive
| 14***11 | Plug Group | 8 |
| 24***62 | Seal-Integral | 5 |
| 24***32 | Valve Group-Control; -Articulation | 1 |
292-2034 Manifold Gp-Valve -Inlet
| 14***11 | Plug Group | 10 |
| 24***62 | Seal-Integral | 6 |
| 24***32 | Valve Group-Control; -Articulation | 1 |
292-2033 Manifold Gp-Valve -Inlet
| 14***11 | Plug Group | 10 |
| 24***62 | Seal-Integral | 6 |
| 24***34 | Valve Group-Control; -Blade Tip | 1 |
105-3196 Motor Gp-Gerotor
| 10***96 | Motor Group-Gerotor; -Circle Drive | 1 |
| 14***11 | Plug Group | 12 |
| 24***62 | Seal-Integral | 7 |
235-8552 Pump & Mtg Gp-Piston -Brake, Hydraulic Fan
| 14***11 | Plug Group | 12 |
| 23***52 | Pump & Mtg Group-Piston; -Brake, Hydraulic Fan | 1 |
| 24***62 | Seal-Integral | 7 |
231-1535 Pump & Mtg Gp-Piston -Implement, Steering
| 14***11 | Plug Group | 12 |
| 23***35 | Pump & Mtg Group-Piston; -Implement, Steering | 1 |
| 24***62 | Seal-Integral | 7 |
250-1170 Pump & Mtg Gp-Secondary Steer -Electric Drive
| 14***11 | Plug Group | 12 |
| 24***62 | Seal-Integral | 7 |
| 24***32 | Valve Group-Control; -Articulation | 1 |
273-8714 Pump Gp-Gear -Secondary Steering
| 14***11 | Plug Group | 14 |
| 24***62 | Seal-Integral | 8 |
| 24***34 | Valve Group-Control; -Blade Tip | 1 |
236-7296 Pump Gp-Piston -Implement, Steering
| 14***11 | Plug Group | 14 |
| 23***96 | Pump Group-Piston; -Implement, Steering | 1 |
| 24***62 | Seal-Integral | 8 |
250-8337 Pump Gp-Piston -Brake, Hydraulic Fan
| 14***11 | Plug Group | 16 |
| 24***62 | Seal-Integral | 9 |
| 24***34 | Valve Group-Control; -Blade Tip | 1 |
259-5504 Rotating Gp-Pump
| 25***04 | Rotating Group-Pump; -Brake, Hydraulic Fan | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 1 |
100-3412 Rotating Gp-Pump
| 10***12 | Rotating Group-Pump; -Implement, Steering | 1 |
| 14***11 | Plug Group | 16 |
| 24***62 | Seal-Integral | 9 |
169-3290 Swashplate Gp -Steering
| 16***54 | Seal-O-Ring | 1 |
| 16***90 | Swashplate Group; -Variable | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
260-6502 Swivel Gp -Circle Drive
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
233-4259 Tank & Mtg Gp-Hydraulic
| 10***60 | Piston | 2 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
241-3867 Tank Gp-Hydraulic
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
249-7298 Valve Gp-Bank 3 -Front Frame, Rear
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
248-6169 Valve Gp-Bank 4 -Front Frame, Rear
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
249-7299 Valve Gp-Bank 5 -Front Frame, Rear
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
248-6168 Valve Gp-Bank 5 -Front Frame
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
249-5330 Valve Gp-Bank 6 -Front Frame, Rear
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
249-7294 Valve Gp-Bank 6 -Front Frame
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
291-9517 Valve Gp-Bank 6 -Front Frame, Rear
| 10***60 | Piston | 2 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
249-7295 Valve Gp-Bank 6 -Front Frame
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
249-5328 Valve Gp-Bank 7 -Front Frame
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
249-7296 Valve Gp-Bank 7 -Front Frame
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
249-7297 Valve Gp-Bank 8 -Front Frame
| 11***16 | Kit-Seal; (Counterbalance Valve) | 1 |
| 24***97 | Valve Group-Bank 8; -Front Frame-Front | 1 |
249-5329 Valve Gp-Bank 8 -Front Frame
| 10***60 | Piston | 2 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
158-9956 Valve Gp-Check
| 15***56 | Valve Group-Check; -Pilot, Differential Lock Oil | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 5P***99 | Ring-To Clutch Piston Pins | 1 |
6e-4701 Valve Gp-Check
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 16***16 | Ring-Backup | 2 |
| 16***17 | Ring-Backup | 2 |
245-9543 Valve Gp-Control -Wing Lift
| 19***07 | Seal-O-Ring | 1 |
| 19***08 | Seal-O-Ring | 2 |
| 19***10 | Seal-O-Ring | 3 |
245-9544 Valve Gp-Control -Bulldozer Lift, Plow
| 09***35 | Nut-Castle; (M42x4.5-Thd) | 4 |
| 12***20 | Setscrew-Socket; (M20x2.5x80-mm) | 6 |
| 19***27 | Shim; (2-mm Thk) | 6 |
245-9537 Valve Gp-Control -Circle Drive
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***36 | Kit-Seal; (Solenoid Valve) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
245-9532 Valve Gp-Control -Articulation
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 19***36 | Spring | 1 |
245-9539 Valve Gp-Control -Wheel Lean
| 19***47 | Washer; (19.15x31.65x2.36-mm Thk) | 1 |
| 19***14 | Nut; (3/4-32-2b-Thd) | 1 |
| 24***39 | Valve Group-Control; -Wheel Lean | 1 |
245-9536 Valve Gp-Control -Blade Sideshift
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
| 16***61 | Ring-Backup | 1 |
245-9541 Valve Gp-Control -Ripper
| 03***43 | Seal-O-Ring | 1 |
| 14***28 | Washer-Spring | 1 |
| 24***41 | Valve Group-Control; -Ripper | 1 |
245-9533 Valve Gp-Control -Blade Lift
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 24***33 | Valve Group-Control; -Blade Lift | 1 |
290-0594 Valve Gp-Control -Wing Tilt
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
245-9542 Valve Gp-Control -Wing Tilt
| 22***22 | Coil As-Solenoid; (24-Volt) | 1 |
| 24***42 | Valve Group-Control; -Wing Tilt | 1 |
| 4K***39 | Seal-O-Ring | 1 |
245-9534 Valve Gp-Control -Blade Tip
| 13***45 | Seal Kit; (Includes Parts Marked J) | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
| 16***61 | Ring-Backup | 2 |
249-7307 Valve Gp-Control -Scarifier
| 16***80 | Bolt; (M20x2.5x75-mm) | 8 |
| 24***07 | Valve Group-Control; -Scarifier | 1 |
| 25***76 | Plate As-Push | 1 |
245-9535 Valve Gp-Control -Blade Centershift
| 13***45 | Seal Kit; (Includes Parts Marked J) | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
| 16***61 | Ring-Backup | 2 |
245-9545 Valve Gp-Control -Plow Angle
| 11***56 | Pin-Spring | 2 |
| 14***12 | Bolt; (M24x3x150-mm) | 4 |
| 17***86 | Stud-Ball | 3 |
105-8117 Valve Gp-Counterbalance
| 10***17 | Valve Group-Counterbalance; -Hood Tilt Cylinder | 1 |
277-2132 Valve Gp-Diverter -Fan Drive
| 11***19 | Screw-Flat Head; (No 6x1-In) | 2 |
| 14***69 | Screw-Self-Tapping; (No 10x19.05-mm) | 2 |
| 24***10 | Gasket | 2 |
252-8038 Valve Gp-Pressure Reducing
| 11***61 | Plate-Instruction; (Air Conditioner Lines) | 1 |
| 23***38 | Condenser & Mtg Group-Refrigerant | 1 |
| 23***49 | Air Conditioner Group | 1 |
271-6847 Valve Gp-Pump Control -Pressure, Flow Compensator
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***40 | Resistor | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
168-2210 Valve Gp-Pump Control -Pressure, Flow Compensator
| 16***10 | Valve Group-Pump Control; -Pressure, Flow Compensator-Hydraulic Oil Clg Fan Piston Pump | 1 |
| 23***91 | Control Group-Air & Temperature | 1 |
| 24***01 | Duct & Filter Group-Cab Air | 1 |
251-8330 Valve Gp-Relief
| 12***66 | Spring | 1 |
| 23***77 | Bracket As; (Lh) | 1 |
| 25***30 | Valve Group-Relief; -Brake Accumulator | 1 |
133-5330 Valve Gp-Relief
| 12***66 | Spring | 1 |
| 13***30 | Valve Group-Relief | 1 |
| 23***78 | Bracket As; (Rh) | 1 |
257-8414 Valve Gp-Shuttle
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
| 25***14 | Valve Group-Shuttle; -Brake Accumulator | 1 |
| 26***32 | Plate As | 1 |
253-0937 Valve Gp-Solenoid
| 12***08 | Bolt; (M4x0.7x35-mm) | 2 |
| 13***93 | Bushing | 1 |
| 16***66 | Nut-Speed | 2 |
189-8627 Valve Gp-Solenoid
| 12***08 | Bolt; (M4x0.7x35-mm) | 2 |
| 13***93 | Bushing | 1 |
| 16***66 | Nut-Speed | 2 |
152-8346 Valve Gp-Solenoid
| 15***46 | Valve Group-Solenoid; -Quick Coupler | 1 |
| 23***33 | Roof Group-Cab | 1 |
| 23***35 | Converter Group-Electrical | 1 |
278-1799 Valve Gp-Solenoid
| 16***72 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 3 |
| 26***26 | Support | 1 |
308-0934 Valve Gp-Steering
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 30***34 | Valve Group-Steering | 1 |
Implements
243-6660 Circle Gp
| 24***60 | Circle Group | 1 |
| 31***08 | Core As-Condenser; (Refrigerant) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
253-4630 Drawbar Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 20 |
| 11***76 | Seal; (5.5-cm Each) | 0 |
250-3071 Plate Gp-Push
| 24***20 | Panel As; (Air Conditioner, Heater Cont) | 1 |
| 25***71 | Plate Group-Push | 1 |
| 25***96 | Switch As-Rocker; (Air Conditioner On, Off) | 1 |
Lubrication System
191-0523 Adapter Gp-Oil Line -Fuel Injection Pump
| 14***54 | Bolt; (M8x1.25x105-mm) | 1 |
| 16***10 | Breather As; (Crankcase) | 1 |
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
222-5946 Breather Gp
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 06***97 | Cap-Oil Filler; (Engine Oil) | 1 |
| 22***46 | Breather Group; -Crankcase | 1 |
239-6239 Filler Gp-Engine Oil
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 20***75 | Cap-Tube | 2 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
189-5433 Filter Gp-Engine Oil
| 14***64 | Stud; (M8x1.25x35-mm) | 2 |
| 18***33 | Filter Group-Engine Oil | 1 |
| 1R***08 | Filter As-Engine Oil; (Advanced Efficiency)(High Efficiency) | 1 |
267-6599 Filter Gp-Engine Oil
| 16***48 | Stud; (M8x1.25x40-mm, M8x1.25x17.5-mm) | 1 |
| 22***10 | Hose-Disposal; (Fumes Disposal) | 1 |
| 26***99 | Filter Group-Engine Oil | 1 |
196-2427 Filter Gp-Engine Oil
| 11***11 | Tee-O-Ring Port | 1 |
| 14***11 | Plug Group | 1 |
| 15***36 | Tee As | 1 |
220-1194 Fumes Disposal Gp
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 19***31 | Bracket | 1 |
| 19***10 | Hose-Fumes Disposal | 1 |
248-0697 Fumes Disposal Gp
| 19***69 | Tube As | 1 |
| 20***58 | Gauge-Oil Level (Dipstick); (Engine) | 1 |
| 24***97 | Fumes Disposal Group | 1 |
253-5258 Gauge Gp-Oil Level (Dipstick) -Engine
| 19***31 | Clip | 1 |
| 1F***67 | Clip 7t***28 Cable As To Fan Shroud | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
276-3681 Gauge Gp-Oil Level (Dipstick) -Engine
| 27***81 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
7c-9279 Lines Gp-Engine Oil
| 12***32 | Tube As-Oil | 1 |
| 3E***53 | Washer-Hard; (11x25x3-mm Thk) | 2 |
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
129-1133 Lines Gp-Engine Oil
| 03***34 | Seal-O-Ring | 1 |
| 12***33 | Lines Group-Engine Oil | 1 |
| 19***52 | Gasket | 1 |
192-2833 Lines Gp-Engine Oil
| 12***79 | Film-Instruction; (Engine Oil Drain) | 1 |
| 14***53 | Hose; (272.2-cm) | 0 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
246-6705 Lines Gp-Engine Oil Drain
| 11***87 | Seal-O-Ring (23.16 mm Id) | 1 |
| 11***42 | Adapter | 1 |
| 18***99 | Connector As | 2 |
250-8315 Lines Gp-Turbocharger Oil
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 19***07 | Hose As | 1 |
| 19***19 | Gasket; (Coated Metal) | 1 |
304-9820 Lines Gp-Turbocharger Oil
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 4 |
| 22***96 | Manifold-Oil; (Engine) | 1 |
| 30***20 | Lines Group-Turbocharger Oil | 1 |
237-8063 Manifold Gp-Engine Oil
| 11***26 | Cap-Dust; (Engine Oil Change) | 1 |
| 11***27 | Fitting; (Quick Disconnect, Male) | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
246-6712 Oil Change Gp-High Speed -Engine
| 22***44 | Gear Assem.; (60 Teeth) | 1 |
| 24***12 | Oil Change Group-High Speed; -Engine | 1 |
| 33***05 | Pump As-Engine Oil | 1 |
233-4674 Oil Change Gp-High Speed -Engine
| 11***26 | Cap-Dust; (Engine Oil Change) | 1 |
| 11***27 | Fitting; (Quick Disconnect, Male) | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
195-8098 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 19***98 | Pump Group-Engine Oil; (Engine Oil) | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
200-4497 Pump Gp-Engine Oil
| 20***97 | Pump Group-Engine Oil | 2 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 2 |
212-2270 Pump Gp-Engine Oil
| 21***70 | Pump Group-Engine Oil | 1 |
| 23***55 | Gasket | 1 |
| 26***43 | Core As-Engine Oil Cooler | 1 |
Machine Arrangement
333-6001 Cold Weather Ar
| 32***69 | Wiring Group-Sensor; -Cold Weather | 1 |
| 32***54 | Lines Group-Transmission Oil; -Cold Weather | 1 |
| 33***85 | Lines Group-Hydraulic Fan; -Cold Weather | 1 |
321-2930 Common Ar
| 23***78 | Engine Ar-Complete | 1 |
| 23***11 | Control Group-Differential Lock | 1 |
| 23***12 | Lines Group-Steering | 1 |
357-2582 Conversion Ar-Certification
| 23***16 | Seat & Mounting Group | 1 |
| 30***70 | Window Group-Cab; -Side, Rear, Rh, Lh, Air Inlet Tube | 1 |
| 35***82 | Conversion Ar-Certification | 1 |
356-9759 Conversion Ar-Machine -Canada
| 23***37 | Fan Group-Circulating; -With Switch | 1 |
| 23***39 | Wiper Group-Window; -Rear | 1 |
| 23***50 | Seat & Mounting Group | 1 |
349-3049 Option Ar-Cab
| 23***23 | Radio Group; -Am/Fm/Wb | 1 |
| 23***34 | Converter Group-Electrical; -Radio | 1 |
| 26***96 | Screen As-Cab; (Rear) | 1 |
349-3050 Option Ar-Cab
| 23***11 | Battery & Wiring Group; -Extreme Service | 1 |
| 23***61 | Starting Aid Group-Ether | 1 |
| 31***59 | Cover Group-Protection; -All Wheel Drive | 1 |
349-3067 Option Ar-Cab -Comfort Cab
| 23***96 | Mirror Group-Rear View; -Exterior, Heated | 1 |
| 23***11 | Battery & Wiring Group; -Extreme Service | 1 |
| 23***61 | Starting Aid Group-Ether | 1 |
349-8290 Option Ar-Cold Weather -Cold Weather Operation Plus
| 23***42 | Control Group-Service Brake | 1 |
| 34***90 | Option Ar-Cold Weather; -Cold Weather Operation Plus | 1 |
| 35***96 | Wiring Group-Rear | 1 |
349-3071 Option Ar-Cold Weather
| 23***24 | Battery & Wiring Group; -Heavy-Duty | 1 |
| 34***71 | Option Ar-Cold Weather | 1 |
352-2104 Option Ar-Control -Brake
| 23***15 | Lighting Group-Flood; -Front Frame | 1 |
| 23***63 | Switch Group-Light; -Work Light | 1 |
| 28***09 | Lighting Group-Flood; -Cab, Front, Rh, Lh | 1 |
344-5498 Option Ar-Eu
| 23***55 | Suppression Group-Sound; -Engine Enclosure | 1 |
| 23***95 | Mirror Group-Rear View; -Exterior | 1 |
| 25***10 | Control Group-Service Brake | 1 |
261-0182 Option Ar-Eu
| 23***55 | Suppression Group-Sound; -Engine Enclosure | 1 |
| 25***10 | Control Group-Service Brake | 1 |
| 26***82 | Option Ar-Eu | 1 |
325-1297 Option Ar-Eu -All Wheel Drive
| 23***34 | Converter Group-Electrical; -Radio | 1 |
| 23***88 | Installation Ar-Communication; -Product Link 321sr | 1 |
| 26***72 | Wiring Group-Lighting; -Marker Lights | 1 |
349-3068 Option Ar-Lighting -Work Lights
| 23***55 | Suppression Group-Sound; -Engine Enclosure | 1 |
| 25***10 | Control Group-Service Brake | 1 |
| 27***40 | Suppression Group-Sound; -Rear Frame | 1 |
349-3069 Option Ar-Lighting -Work Lights, Ripper
| 23***55 | Suppression Group-Sound; -Engine Enclosure | 1 |
| 25***10 | Control Group-Service Brake | 1 |
| 27***40 | Suppression Group-Sound; -Rear Frame | 1 |
349-3066 Option Ar-Lighting -Snow Wing
| 23***15 | Lighting Group-Flood; -Front Frame | 1 |
| 23***20 | Lamp Group-Flood; -Ripper | 1 |
| 23***63 | Switch Group-Light; -Work Light | 1 |
349-8722 Option Ar-Regional -With Cab
| 24***25 | Autoshift Ar; -Transmission | 1 |
| 25***24 | Alternator Group-Charging; -With Air Conditioner | 1 |
| 29***65 | Lighting Group-Roading; -Snow Removal | 1 |
350-5389 Option Ar-Regional
| 23***55 | Suppression Group-Sound; -Engine Enclosure | 1 |
| 23***95 | Mirror Group-Rear View; -Exterior | 1 |
| 23***31 | Lamp Group-Registration Plate; -Eame | 1 |
352-2108 Option Ar-Roading
| 23***43 | Edge Group-Cutting | 1 |
| 23***48 | Bit Group-End | 1 |
| 24***03 | Blade Group | 1 |
349-8291 Option Ar-Roading -All Wheel Drive
| 23***39 | Edge Group-Cutting | 1 |
| 23***48 | Bit Group-End | 1 |
| 24***02 | Blade Group; -12-Ft | 1 |
349-3070 Option Ar-Starting
| 23***26 | Installation Group-Lighting | 1 |
| 24***87 | Mounting Group-Snow Wing; -Front, Rh | 1 |
| 34***70 | Option Ar-Starting | 1 |
349-3065 Option Ar-Work Tool -Scarifier
| 23***37 | Fan Group-Circulating; -With Switch | 1 |
| 23***39 | Wiper Group-Window; -Rear | 1 |
| 23***96 | Mirror Group-Rear View; -Exterior, Heated | 1 |
349-3047 Option Ar-Work Tool
| 25***83 | Bracket Group-Scarifier | 1 |
| 31***25 | Scarifier Ar; -Vee Type | 1 |
| 34***47 | Option Ar-Work Tool | 1 |
349-3046 Option Ar-Work Tool
| 23***43 | Edge Group-Cutting | 1 |
| 23***60 | Bit Group-End | 1 |
| 24***04 | Blade Group | 1 |
349-3048 Option Ar-Work Tool
| 23***31 | Lamp Group-Registration Plate; -Eame | 1 |
| 26***13 | Fender & Support Group; -Rear | 1 |
| 26***72 | Wiring Group-Lighting; -Marker Lights | 1 |
250-3818 Roading Ar -Eame
| 24***72 | Alternator Group-Charging; -With Air Conditioner | 1 |
| 24***25 | Autoshift Ar; -Transmission | 1 |
| 25***18 | Roading Ar; -Eame | 1 |
261-0187 Snow Ar-Motor Grader
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 06***51 | Clamp | 1 |
350-0677 Snow Ar-Motor Grader
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
| 12***33 | Lines Group-Engine Oil | 1 |
| 15***03 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
Operator Station
173-1028 Adjuster Gp-Seat
| 17***28 | Adjuster Group-Seat; -Seat | 1 |
| 22***89 | Plug; (Rocker Switch)(Rocker Switch) | 1 |
| 24***20 | Panel As; (Air Conditioner, Heater Cont) | 1 |
237-3970 Air Compressor Gp-Seat
| 23***70 | Air Compressor Group-Seat | 1 |
| 27***42 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
| 33***86 | Harness As-Sensor | 1 |
244-2722 Air Conditioner & Mounting Gp
| 24***22 | Air Conditioner & Mounting Group | 1 |
| 27***41 | Control Group-Electrohydraulic; -Without Auxiliary Lever | 1 |
| 33***86 | Harness As-Sensor | 1 |
261-0775 Air Conditioner Ar
| 19***15 | Kit-Receptacle; (12-Pin) | 1 |
| 26***75 | Air Conditioner Ar | 1 |
| 28***55 | Film-Instruction; (Auxiliary) | 1 |
285-8055 Air Conditioner Gp
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 22***09 | Screw-Truss Head; (M4x0.7x14-mm) | 3 |
| 24***40 | Control As-Proportional; (Rear Implement) | 1 |
233-3149 Air Conditioner Gp
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 19***15 | Kit-Receptacle; (12-Pin) | 1 |
| 23***49 | Air Conditioner Group | 1 |
292-0609 Armrest Gp -Rh
| 16***05 | Seal | 9 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 24***33 | Boot | 1 |
292-0617 Armrest Gp -Lh
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 16***05 | Seal | 5 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
265-8937 Bracket Gp-Mounting -Fuse Panel
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 16***05 | Seal | 5 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
254-5399 Cab Ar
| 16***05 | Seal | 9 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 24***33 | Boot | 1 |
278-1440 Coil Gp-Evaporator & Heater -Air Conditioner
| 12***12 | Screw-Pan Head; (8-16x0.32-In) | 1 |
| 27***40 | Coil Group-Evaporator & Heater; -Air Conditioner | 1 |
| 30***68 | Control As-Electronic; (Messenger) | 1 |
278-1442 Coil Gp-Heater
| 26***89 | Cover | 1 |
| 27***42 | Coil Group-Heater | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 3 |
246-6714 Compressor & Mtg Gp-Refrig
| 23***45 | Plate | 1 |
| 23***72 | Cushion As | 1 |
| 24***14 | Compressor & Mtg Group-Refrig | 1 |
163-0872 Compressor Gp-Refrigerant
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 16***72 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
232-4738 Condenser & Mtg Gp-Refrigerant
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***08 | Bumper; (Conical) | 1 |
| 11***24 | Button | 8 |
233-3146 Control & Mtg Gp-Joystick
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***08 | Bumper; (Conical) | 1 |
| 11***24 | Button | 8 |
309-5955 Control & Mtg Gp-Joystick -Operator Platform
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***24 | Button | 8 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 5 |
283-7678 Control Gp-Air & Temperature
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 1 |
| 13***79 | Bracket | 1 |
| 17***35 | Motor Group-Electric; -Circulating Fan | 1 |
233-3291 Control Gp-Air & Temperature
| 14***12 | Filter Element-Cab Air; (Cab Heater, Air Conditioner) | 1 |
| 21***60 | Filter Element-Air; (Cab Heater, Air Conditioner) | 1 |
| 22***00 | Filter Element-Cab Air; (Activated Charcoal) | 1 |
272-8441 Control Gp-Electrohydraulic -Without Auxiliary Lever
| 23***30 | Heater Group-Cab | 1 |
| 25***48 | Lines Group-Heater | 1 |
| 27***41 | Control Group-Electrohydraulic; -Without Auxiliary Lever | 1 |
233-3147 Control Gp-Electrohydraulic -With Auxiliary Lever
| 17***34 | Fan Group-Circulating; -Defrost | 1 |
| 23***47 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
| 23***11 | Switch As-Rocker; (Fan Blower Speed) | 1 |
272-8442 Control Gp-Electrohydraulic -With Auxiliary Lever
| 24***01 | Duct & Filter Group-Cab Air | 1 |
| 27***02 | Heater & Mtg Group-Cab | 1 |
| 27***42 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
299-0874 Control Gp-Electrohydraulic
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***40 | Resistor | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
238-8756 Control Gp-Electrohydraulic -Without Auxiliary Lever
| 11***19 | Screw-Flat Head; (No 6x1-In) | 2 |
| 14***69 | Screw-Self-Tapping; (No 10x19.05-mm) | 2 |
| 23***56 | Control Group-Electrohydraulic; -Without Auxiliary Lever | 1 |
308-5204 Control Gp-Joystick -Lh
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
356-3609 Control Gp-Joystick -Rh
| 12***24 | Clamp | 1 |
| 18***89 | Accumulator-Refrigerant; (Air Conditioner) | 1 |
| 18***07 | Orifice As-Air Conditioner | 1 |
356-3607 Control Gp-Joystick -Lh
| 03***14 | Screw; (10-32x1-In) | 3 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 10***03 | Fastener | 2 |
308-5203 Control Gp-Joystick -Rh
| 10***74 | Seal-Connector | 3 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***25 | Clip | 1 |
308-3869 Control Gp-Unprgmed Monitor -Messenger
| 08***91 | Bolt; (M10x1.5x55-mm) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***76 | Hose As | 1 |
263-2590 Cover Gp-Cab -Bulkhead
| 08***91 | Bolt; (M10x1.5x55-mm) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***33 | Switch As-Pressure; (A/C) | 1 |
252-1805 Cushion Gp-Arm
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 25***05 | Cushion Group-Arm | 1 |
| 26***06 | Plate As | 1 |
278-0668 Display Gp-Camera -Work Area Visual System
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 1 |
| 14***42 | Connector Group | 1 |
| 15***58 | Connector | 2 |
294-1033 Door Gp-Cab -Lh
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 27***43 | Plate As | 1 |
| 27***44 | Plate | 1 |
294-1034 Door Gp-Cab -Rh
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 27***88 | Mirror As | 1 |
| 29***34 | Door Group-Cab; -Rh | 1 |
294-1035 Door Gp-Cab -Rh
| 29***35 | Door Group-Cab; -Rh | 1 |
| 2K***73 | Locknut Inside Guard Assembly | 2 |
| 33***67 | Block | 4 |
244-2701 Duct & Filter Gp-Cab Air
| 24***01 | Duct & Filter Group-Cab Air | 1 |
| 5K***79 | Bolt-Round Head; (3/8-16x11-In) | 1 |
| 5P***74 | Mirror; (Rear View) | 1 |
233-3137 Fan Gp-Circulating
| 12***86 | Block | 4 |
| 18***58 | Bolt; (M10x1.5x60-mm) | 8 |
| 23***37 | Fan Group-Circulating; -With Switch | 1 |
170-5334 Fan Gp-Circulating -Defrost
| 10***59 | Mirror Group-Rear View; -Interior | 1 |
| 17***34 | Fan Group-Circulating; -Defrost | 1 |
271-7302 Heater & Mtg Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***86 | Block | 4 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
261-0839 Heater Ar-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***86 | Block | 4 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
244-2699 Heater Gp-Cab
| 09***16 | . Screw; Set, Cam | 2 |
| 12***86 | Block | 1 |
| 24***99 | Heater Group-Cab | 1 |
233-3130 Heater Gp-Cab
| 09***16 | . Screw; Set, Cam | 2 |
| 12***86 | Block | 4 |
| 23***30 | Heater Group-Cab | 1 |
174-2231 Housing Gp-Seat Suspension
| 17***31 | Housing Group-Seat Suspension | 1 |
| 31***73 | Mirror | 1 |
| 5K***79 | Bolt-Round Head; (3/8-16x11-In) | 1 |
294-0987 Liner Gp-Cab
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 29***87 | Liner Group-Cab | 1 |
244-2702 Lines Gp-Air Conditioner
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
| 20***23 | Cap; (Wiper) | 2 |
| 24***02 | Lines Group-Air Conditioner | 1 |
255-1249 Lines Gp-Air Conditioner
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 25***49 | Lines Group-Air Conditioner | 1 |
250-2933 Lines Gp-Heater -Cab
| 25***33 | Lines Group-Heater; -Cab | 1 |
| 28***55 | Antenna As | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 4 |
255-1248 Lines Gp-Heater
| 11***31 | Mount Assem. | 8 |
| 25***48 | Lines Group-Heater | 1 |
| 3E***98 | Sleeve | 4 |
273-1878 Lines Gp-Heater
| 22***09 | Screw-Truss Head; (M4x0.7x14-mm) | 2 |
| 25***47 | Grommet | 1 |
| 27***78 | Lines Group-Heater | 1 |
339-6165 Mirror Gp -Interior, Front
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***07 | Holder | 1 |
339-8788 Mirror Gp -Exterior
| 16***83 | Knob-Lumbar | 1 |
| 25***28 | Plug | 3 |
| 29***97 | Cushion As-Back | 1 |
233-3296 Mirror Gp-Rear View -Exterior, Heated
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 18 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 8 |
310-9292 Mirror Gp-Rear View
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***24 | Button | 4 |
| 19***32 | Motor As-Blower; (24-Volt, Cab Air) | 1 |
310-9291 Mirror Gp-Rear View -Exterior Mirrors
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 17***59 | Switch Group-Limit; -Brake Pedal, Xmsn Mdl Cont | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
311-4574 Mirror Gp-Rear View -Interior
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
233-3295 Mirror Gp-Rear View -Exterior
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***39 | Nut-Weld; (M6x1-Thd)(M6x1-6h Thd) | 2 |
| 17***11 | Nut; (5/8-24-Thd) | 1 |
233-3208 Mirror Gp-Rear View -Interior
| 09***23 | Screw; (M3x0.5x10-mm) | 4 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
105-9659 Mirror Gp-Rear View -Interior
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***59 | Mirror Group-Rear View; -Interior | 1 |
| 21***14 | Switch As-Limit; (Seat Adjustment) | 1 |
250-5529 Motor Gp-Window Wiper -Rear
| 19***54 | Sleeve | 1 |
| 25***29 | Motor Group-Window Wiper; -Rear | 1 |
330-5016 Motor Gp-Window Wiper
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 20***28 | Harness As-Radio; (Fm) | 1 |
295-1120 Motor Gp-Window Wiper -Front
| 19***54 | Sleeve | 1 |
| 29***20 | Motor Group-Window Wiper; -Front | 1 |
278-0684 Mounting Gp-Antenna -Satellite Radio
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 20***28 | Harness As-Radio; (Fm) | 1 |
233-3122 Mounting Gp-Antenna -Radio
| 13***90 | Bushing; (Radio Mount) | 1 |
| 14***81 | Knob-Select; (Radio) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
254-5395 Mounting Gp-Cab
| 19***54 | Sleeve | 1 |
| 25***95 | Mounting Group-Cab | 1 |
299-0881 Mounting Gp-Control -With Enclosure
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
292-6402 Pan Gp-Backrest -Lumbar
| 23***09 | Panel; (Lh) | 1 |
| 24***73 | Panel; (Rh) | 1 |
| 25***47 | Grommet | 3 |
292-9237 Pan Gp-Backrest -Lumbar
| 23***09 | Panel; (Lh) | 1 |
| 24***73 | Panel; (Rh) | 1 |
| 29***37 | Pan Group-Backrest; -Cloth, Lumbar | 1 |
243-6737 Pan Gp-Seat -Lumbar
| 24***37 | Pan Group-Seat; -Lumbar | 1 |
| 24***40 | Seat Group-Suspension | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
293-4200 Panel Gp-Cab -Hvac
| 23***83 | Seat Group-Suspension; -Air | 1 |
| 29***00 | Panel Group-Cab; -Heating Ventilation Air Conditioning | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
314-3323 Panel Gp-Control -Accugrade, Lh
| 0T***44 | Bolt (1.25" Long) | 1 |
| 17***37 | Spacer; (11.7x19.8x20.3-mm Thk)(Lh Seat Side) | 1 |
| 20***88 | Bolt; (7/16-20) (44.5mml) | 1 |
319-1617 Panel Gp-Control -Accugrade
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
294-0984 Panel Gp-Instrument -Front Console
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 20***03 | Washer-Hard; (10.2x22.22x2.38-mm Thk) | 2 |
265-8943 Pedal Gp-Brake, Xmsn & Gov
| 16***65 | Suspension Group-Seat | 1 |
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
346-6901 Pedal Gp-Brake, Xmsn & Gov
| 11***58 | Washer; (6.5x17x1-mm Thk) | 2 |
| 13***00 | Clip; (Tab) | 4 |
| 23***27 | Support As; (Lh) | 1 |
269-3284 Pressurizer Gp-Cab
| 11***58 | Washer; (6.5x17x1-mm Thk) | 2 |
| 13***00 | Clip; (Tab) | 4 |
| 16***14 | Knob | 1 |
294-0991 Radio Gp -Am/Fm/Wb/Sirius/Cd Player
| 23***35 | Glass-Rear | 1 |
| 29***91 | Radio Group; -Am/Fm/Wb/Sirius/Cd Player | 1 |
| 30***71 | Glass; (Rh) | 1 |
294-0990 Radio Gp -Am/Fm/Wb/Xm/Cd Player
| 11***58 | Washer; (6.5x17x1-mm Thk) | 6 |
| 22***69 | Indicator-Level | 1 |
| 29***90 | Radio Group; -Am/Fm/Wb/Xm/Cd Player | 1 |
331-5292 Radio Gp -Am, Fm
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 2 |
| 23***88 | Wiper Group-Window; -Side, Rh, Lh | 1 |
294-0989 Radio Gp -Am/Fm/Wb/Cd Player
| 14***95 | Hose; (650-cm Each) | 0 |
| 25***79 | Tank-Washer | 1 |
| 26***45 | Connector | 1 |
233-3123 Radio Gp -Am/Fm/Wb
| 11***58 | Washer; (6.5x17x1-mm Thk) | 20 |
| 11***76 | Seal; (5.5-cm Each) | 0 |
| 14***45 | Film-Identification; (Horn) | 1 |
284-8955 Radio Gp -Am/Fm/Wb/Sirius/ Cd Player
| 10***03 | Fastener | 26 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
284-8953 Radio Gp -Am/Fm/Wb/Cd Player
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
210-2270 Recliner Gp-Seat
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 3 |
| 13***88 | Clip | 3 |
233-3133 Roof Gp-Cab
| 11***69 | Arm As-Window Wiper; (Rear) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***33 | Blade As-Wiper; (500-mm)(Rear) | 1 |
233-3150 Seat & Mounting Gp
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 19***71 | Hose; (116-cm) | 0 |
233-3116 Seat & Mounting Gp
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
244-5001 Seat Gp -Cloth
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
244-5002 Seat Gp -Cloth
| 24***02 | Seat Group; -Cloth | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 10 |
| 5J***73 | Bolt 2.06cm(.8125in.)Long | 10 |
243-6740 Seat Gp-Suspension
| 1J***62 | Bolt-Plow | 4 |
| 24***40 | Seat Group-Suspension | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 14 |
238-6683 Seat Gp-Suspension
| 1J***62 | Bolt-Plow | 4 |
| 23***42 | Bit | 2 |
| 23***83 | Seat Group-Suspension; -Air | 1 |
233-3225 Support Gp-Control -Joystick, Rh
| 23***25 | Support Group-Control; -Joystick, Rh | 1 |
| 26***85 | Reinforcement | 1 |
| 26***92 | Moldboard As | 1 |
233-3224 Support Gp-Control -Joystick, Lh
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 23***24 | Support Group-Control; -Joystick, Lh | 1 |
| 26***73 | Bracket Group-Mounting; -Snow Wing | 1 |
342-8961 Support Gp-Control -Operator Platform
| 26***91 | Reinforcement | 1 |
| 26***93 | Moldboard As | 1 |
| 26***58 | Plate | 2 |
256-8768 Suspension Gp-Seat -Air, Heated
| 1J***29 | Bolt-Plt; (1unc X 6) | 1 |
| 25***68 | Suspension Group-Seat; -Air, Heated | 1 |
| 27***28 | Moldboard As | 1 |
160-7165 Suspension Gp-Seat
| 16***65 | Suspension Group-Seat | 1 |
| 26***91 | Reinforcement | 1 |
| 26***94 | Moldboard As | 1 |
248-3164 Tank Gp-Window Washer
| 11***27 | Bolt; (M20x2.5x90-mm) | 6 |
| 24***64 | Tank Group-Window Washer | 1 |
| 26***08 | Washer-Hard; (35x22x3.5-mm Thk) | 28 |
294-1011 Window Gp-Cab -Front
| 10***80 | Boss | 1 |
| 20***71 | Cable | 1 |
| 26***72 | Bracket As | 1 |
300-1870 Window Gp-Cab -Side, Rear, Rh, Lh
| 30***70 | Window Group-Cab; -Side, Rear, Rh, Lh, Air Inlet Tube | 1 |
| 30***37 | Bracket As | 1 |
| 32***66 | Bracket As | 1 |
300-1873 Window Gp-Cab -Rear, Lh, Rh, Side Wipers
| 16***90 | Seal As-Buffer | 1 |
| 16***00 | Seal-U-Cup | 1 |
| 21***42 | Tube As | 1 |
233-3138 Wiper & Washer Gp-Window -Front
| 10***44 | Plug | 1 |
| 23***38 | Wiper & Washer Group-Window; -Front | 1 |
| 25***82 | Tube-Piston | 1 |
295-1113 Wiper Gp-Window -Door, Rh
| 06***60 | Ring-Retaining | 1 |
| 10***80 | Bit Group | 48 |
| 15***13 | Adapter; (3-Ft)(Inside) | 4 |
233-3139 Wiper Gp-Window -Rear
| 03***43 | Seal-O-Ring | 1 |
| 10***17 | Valve Group-Counterbalance; -Hood Tilt Cylinder | 1 |
| 10***44 | Plug | 3 |
295-1114 Wiper Gp-Window -Door, Lh
| 06***60 | Ring-Retaining | 1 |
| 15***17 | Adapter; (4-Ft) | 2 |
| 15***18 | Adapter; (3-Ft) | 2 |
233-3188 Wiper Gp-Window -Side, Rh, Lh
| 06***60 | Ring-Retaining | 1 |
| 15***18 | Adapter; (3-Ft) | 4 |
| 23***88 | Wiper Group-Window; -Side, Rh, Lh | 1 |
Power Train
248-6925 Autoshift Ar -Transmission
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
| 24***25 | Autoshift Ar; -Transmission | 1 |
| 33***79 | Spring | 1 |
260-8696 Axle Ar-Front -All Wheel Drive
| 26***96 | Axle Ar-Front; -All Wheel Drive | 1 |
| 32***69 | Wiring Group-Sensor; -Cold Weather | 1 |
| 32***54 | Lines Group-Transmission Oil; -Cold Weather | 1 |
260-8699 Axle Gp-Front -All Wheel Drive
| 14***39 | Lock | 3 |
| 14***09 | Adapter As | 1 |
| 14***06 | Plug As | 6 |
260-8698 Axle Gp-Front -All Wheel Drive
| 1S***10 | Bearing Assem. | 6 |
| 26***98 | Axle Group-Front; -All Wheel Drive | 1 |
| 26***25 | Retainer | 3 |
284-5013 Axle Gp-Rear
| 28***13 | Axle Group-Rear | 1 |
| 29***77 | Chain | 4 |
| 29***78 | Link-Connecting | 1 |
333-9308 Base Gp-Oil Filter -Power Train
| 10***81 | Spring-Wave | 1 |
| 13***19 | Bearing-Roller (Inner) | 1 |
| 13***28 | Gear As; (44-Teeth) | 1 |
238-1029 Base Gp-Oil Filter -Power Train
| 10***51 | Disc-Friction | 2 |
| 13***19 | Bearing-Roller (Inner) | 1 |
| 13***25 | Gear As; (50-Teeth)(50 Teeth) | 1 |
325-5392 Bypass Ar-Transmission -Cold Weather Starting
| 10***81 | Spring-Wave | 2 |
| 13***19 | Bearing-Roller (Inner) | 1 |
| 13***30 | Gear As; (54-Teeth) | 1 |
272-8009 Carrier Gp-Final Drive
| 10***81 | Spring-Wave | 1 |
| 13***19 | Bearing-Roller (Inner) | 1 |
| 13***37 | Gear As; (43-Teeth) | 1 |
253-8426 Case Gp-Transmission
| 14***25 | Connector As. | 1 |
| 14***68 | Elbow Group | 1 |
| 14***74 | Elbow As | 1 |
297-8776 Chain Gp-Drive -Tandem
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
247-8303 Clutch Gp-Transmission -High, Low
| 11***27 | Cover-Shipping | 1 |
| 12***73 | Cap-Connector | 2 |
| 14***06 | Plug As | 2 |
235-2412 Clutch Gp-Transmission -Forward
| 12***61 | Gasket | 2 |
| 13***55 | Spacer; (10x20x7-mm Thk) | 2 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
235-2414 Clutch Gp-Transmission -First, Third
| 16***28 | Bolt; (3/8-16-Thd)(3/8-16x1.25 In) | 12 |
| 23***14 | Clutch Group-Transmission; -First, Third | 1 |
| 28***99 | Coupling As | 1 |
235-2413 Clutch Gp-Transmission -Reverse, Second
| 12***61 | Gasket | 2 |
| 17***53 | Core As-Transmission Cooler; (Transmission Oil Cooler) | 1 |
| 23***13 | Clutch Group-Transmission; -Reverse, Second | 1 |
231-1511 Control Gp-Differential Lock
| 1J***60 | Cup-Bearing; (Tapered) | 1 |
| 1J***57 | Cone-Bearing | 1 |
| 20***13 | Bearing As | 1 |
253-8425 Control Gp-Transmission Hyd
| 14***41 | Spring | 3 |
| 20***76 | Plate-Separator | 9 |
| 20***77 | Disc-Friction | 9 |
272-1045 Cooler Gp-Transmission Oil
| 10***69 | Bolt-Self-Locking; (M16x2x60-mm) | 3 |
| 16***09 | Bolt-Hex Head; (Mj16x2.0x50mm) | 12 |
| 19***68 | Washer-Hard; (17.5x32x8-mm Thk) | 24 |
250-6726 Cooler Gp-Transmission Oil
| 10***69 | Bolt-Self-Locking; (M16x2x60-mm) | 3 |
| 16***09 | Bolt-Hex Head; (Mj16x2.0x50mm) | 12 |
| 19***68 | Washer-Hard; (17.5x32x8-mm Thk) | 24 |
8e-3366 Coupling Gp-Torsional
| 26***22 | Cover | 2 |
| 29***82 | Gear Group-Front; -All Wheel Drive, Rh | 1 |
| 29***83 | Gear Group-Front; -All Wheel Drive, Rh | 1 |
263-7434 Cover Gp-Shipping -Transmission
| 25***86 | Gauge As-Oil Level (Dipstick); (Power Train Oil) | 1 |
| 25***20 | Tube As | 1 |
| 26***34 | Cover Group-Shipping; -Transmission | 1 |
271-8594 Differential & Bevel Gear Gp
| 25***86 | Gauge As-Oil Level (Dipstick); (Power Train Oil) | 1 |
| 25***20 | Tube As | 1 |
| 26***83 | Tube As | 1 |
287-8223 Differential Gp
| 13***00 | Clip; (Tab) | 1 |
| 28***12 | Filter Group-Oil; -Transmission | 1 |
| 28***23 | Differential Group | 1 |
288-6508 Drive Gp-Final -Rh
| 13***00 | Clip; (Tab) | 1 |
| 28***08 | Drive Group-Final; -Rh | 1 |
| 28***47 | Plate As | 1 |
288-6509 Drive Gp-Final -Lh
| 13***29 | Seal-O-Ring | 1 |
| 1R***09 | Filter Element-Oil; (Ultra High Efficiency)(Power Train) | 1 |
| 23***29 | Base Group-Oil Filter; -Transmission | 1 |
260-4803 Drive Gp-Wheel -All Wheel Drive
| 13***29 | Seal-O-Ring | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 3 |
| 25***27 | Elbow | 1 |
231-2131 Filler Gp-Power Train Oil
| 23***31 | Filler Group-Power Train Oil | 1 |
| 29***70 | Spindle As; (All Wheel Drive, Lh) | 1 |
| 29***72 | Kit-Bearing | 1 |
349-6142 Filler Gp-Power Train Oil
| 09***85 | Clip | 3 |
| 10***36 | Clip | 1 |
| 10***25 | Elbow | 1 |
247-4025 Filler Gp-Power Train Oil
| 24***25 | Filler Group-Power Train Oil | 1 |
| 29***71 | Spindle As; (All Wheel Drive, Rh) | 1 |
| 29***72 | Kit-Bearing | 1 |
250-8292 Filter & Mtg Gp-Transmission
| 09***85 | Clip | 3 |
| 10***36 | Clip | 1 |
| 10***25 | Elbow | 1 |
333-6433 Filter Gp-Oil -Transmission
| 03***83 | Nipple-Front Axle Suction Port | 2 |
| 13***29 | Seal-O-Ring | 1 |
| 13***84 | Clip | 2 |
287-1512 Filter Gp-Oil -Transmission
| 03***83 | Nipple-Front Axle Suction Port | 2 |
| 13***84 | Clip | 2 |
| 14***23 | Connector As. | 1 |
292-3482 Gear Gp-Front -All Wheel Drive, Rh
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***57 | Elbow As. | 1 |
| 28***97 | Tube As | 1 |
292-3483 Gear Gp-Front -All Wheel Drive, Lh
| 14***55 | Elbow As. | 1 |
| 14***57 | Elbow As. | 2 |
| 25***68 | Valve Group-Solenoid | 1 |
231-8164 Lines Gp-All Wheel Drive
| 03***77 | Ring-Retaining | 1 |
| 09***39 | Ring; (Retaining) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
255-1244 Lines Gp-Lubrication
| 25***44 | Lines Group-Lubrication | 1 |
| 27***45 | Cooler Group-Transmission Oil | 1 |
| 7X***62 | Capscrew, Hex Head (Hm20 - 2.5 X 50 mm, G8) | 3 |
255-1243 Lines Gp-Transmission Oil
| 11***74 | Seal-O-Ring | 1 |
| 25***43 | Lines Group-Transmission Oil | 1 |
| 32***37 | Pump Group-Gear; -Transmission | 1 |
262-6674 Lines Gp-Transmission Oil
| 11***74 | Seal-O-Ring | 1 |
| 11***27 | Gear-Oil Pump; (8-Teeth) | 2 |
| 16***68 | Seal-O-Ring | 3 |
324-9254 Lines Gp-Transmission Oil -Cold Weather
| 10***79 | Seal-O-Ring | 1 |
| 13***18 | Plug | 1 |
| 17***10 | Washer-Hard; (17.5x32x7-mm Thk) | 2 |
231-1530 Lines Gp-Transmission Oil
| 23***30 | Lines Group-Transmission Oil | 1 |
| 24***90 | Pump Group-Piston; -All Wheel Drive | 1 |
| 8T***93 | Bolt-Plt; (M16 X 2.0 X 50) | 2 |
260-4802 Motor & Mtg Gp-Piston -All Wheel Drive
| 11***95 | Plug As | 1 |
| 11***84 | Bearing-Tapered Roller | 1 |
| 11***95 | Plate | 1 |
317-5145 Motor Gp-Piston -All Wheel Drive
| 11***95 | Plug As | 1 |
| 11***84 | Bearing-Tapered Roller | 1 |
| 11***95 | Plate | 1 |
262-8360 Mounting Gp-Tmsn Oil Cooler
| 26***60 | Mounting Group-Tmsn Oil Cooler | 1 |
| 5F***00 | Seal-O-Ring | 1 |
| 5P***63 | Seal-O-Ring | 1 |
231-8159 Pump & Mtg Gp-All Wheel Drive
| 23***59 | Pump & Mtg Group-All Wheel Drive | 1 |
| 32***97 | Cover As | 1 |
| 5P***11 | Seal-O-Ring (Id=50.39mm) | 1 |
262-6672 Pump & Mtg Gp-Gear -Power Train
| 24***65 | Universal Joint Group | 1 |
| 26***72 | Pump & Mtg Group-Gear; -Power Train | 1 |
| 4E***73 | Strap | 4 |
326-1237 Pump Gp-Gear -Transmission
| 1M***95 | Race & Roller Assem. (Inner) | 1 |
| 24***46 | Gear; (38-Teeth) | 1 |
| 24***52 | Gear; (45-Teeth) | 1 |
246-4490 Pump Gp-Piston -All Wheel Drive
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 24***90 | Pump Group-Piston; -All Wheel Drive | 1 |
| 24***78 | Cover | 6 |
283-7728 Pump Gp-Piston -All Wheel Drive
| 23***01 | Spider & Bearing Group | 2 |
| 28***28 | Pump Group-Piston; -All Wheel Drive | 1 |
| 3E***15 | Bolt-Locking; (M8x1x14-mm) | 4 |
273-5454 Pump Gp-Piston -All Wheel Drive
| 23***12 | Clutch Group-Transmission; -Forward | 1 |
| 23***13 | Clutch Group-Transmission; -Reverse, Second | 1 |
| 23***14 | Clutch Group-Transmission; -First, Third | 1 |
9w-5134 Screen Gp-Magnetic -Transmission
| 24***81 | Flange | 1 |
| 24***11 | Cover-Base | 1 |
| 24***12 | Kit-Seal; (Solenoid Valve) | 1 |
233-6370 Shaft Gp-Drive
| 09***01 | Bolt-Socket Head; (M8x1.25x40-mm) | 2 |
| 15***72 | Bolt-Socket Head; (M4x0.07-Thd) | 8 |
| 17***39 | Bolt-Socket Head; (M8x1.25x30-mm) | 2 |
305-2148 Shaft Gp-Input -Transmission
| 11***50 | Cover | 1 |
| 16***77 | Plug As | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
285-0592 Tandem & Cover Gp
| 25***91 | Wheel & Tire Ar | 2 |
| 25***74 | Wheel & Tire Ar | 4 |
| 28***92 | Tandem & Cover Group | 1 |
253-8405 Transmission Ar
| 25***79 | Wheel & Tire Group | 2 |
| 25***66 | Wheel & Tire Group | 4 |
| 25***05 | Transmission Ar | 1 |
246-6465 Universal Joint Gp
| 24***65 | Universal Joint Group | 1 |
| 25***09 | Wheel & Tire Group | 2 |
| 25***00 | Wheel & Tire Group | 4 |
250-2139 Valve & Mtg Gp-Solenoid
| 10***49 | Tire; (17.5-R25) | 1 |
| 25***39 | Valve & Mtg Group-Solenoid; -Differential Lock | 1 |
| 25***13 | Wheel Group; -All Wheel Drive | 1 |
244-3114 Valve Gp-Modulating
| 24***14 | Valve Group-Modulating; -Transmission Hydraulic Control | 1 |
| 25***78 | Wheel & Tire Group | 4 |
| 25***80 | Wheel & Tire Group | 2 |
273-5510 Valve Gp-Pump Control -Pressure, Flow Compensator
| 25***82 | Wheel & Tire Group | 4 |
| 25***84 | Wheel & Tire Group | 2 |
| 27***10 | Valve Group-Pump Control; -Pressure, Flow Compensator | 1 |
235-3530 Valve Gp-Relief
| 23***30 | Valve Group-Relief; -Transmission | 1 |
| 25***86 | Wheel & Tire Group | 4 |
| 25***88 | Wheel & Tire Group | 2 |
249-7841 Wheel & Tire Ar
| 24***41 | Wheel & Tire Ar; -All Wheel Drive | 1 |
| 25***92 | Wheel & Tire Group | 4 |
| 25***94 | Wheel & Tire Group | 2 |
252-0779 Wheel & Tire Ar
| 25***79 | Wheel & Tire Ar | 1 |
| 31***02 | Wheel & Tire Group | 2 |
| 31***03 | Wheel & Tire Group | 4 |
250-9691 Wheel & Tire Ar
| 25***91 | Wheel & Tire Ar | 1 |
| 25***13 | Wheel & Tire Group | 4 |
| 25***15 | Wheel & Tire Group | 2 |
305-6160 Wheel & Tire Ar
| 30***60 | Wheel & Tire Ar | 1 |
| 31***09 | Wheel & Tire Group | 4 |
| 31***10 | Wheel & Tire Group | 2 |
252-0755 Wheel & Tire Ar
| 25***55 | Wheel & Tire Ar | 1 |
| 30***55 | Bolt, Stud, Stud, Wheel & Tire Group | 4 |
| 30***61 | Wheel & Tire Group | 2 |
252-7948 Wheel & Tire Ar
| 25***48 | Wheel & Tire Ar | 1 |
| 31***79 | Wheel & Tire Group | 2 |
| 31***80 | Wheel & Tire Group | 4 |
311-6087 Wheel & Tire Ar
| 11***13 | Tire; (14-R24)(14.0 R24 Tg * Xgla2 G-2) | 1 |
| 25***08 | Wheel Group | 1 |
| 31***87 | Wheel & Tire Ar | 1 |
324-6209 Wheel & Tire Ar
| 12***78 | Tire; (14.00 R24 Tg Rl2f * G-2) | 1 |
| 25***10 | Wheel Group; -All Wheel Drive | 1 |
| 32***09 | Wheel & Tire Ar | 1 |
249-7845 Wheel & Tire Ar
| 24***45 | Wheel & Tire Ar | 1 |
| 25***07 | Wheel & Tire Group | 4 |
| 25***09 | Wheel & Tire Group | 2 |
252-0681 Wheel & Tire Ar
| 25***81 | Wheel & Tire Ar | 1 |
| 25***19 | Wheel & Tire Group | 4 |
| 25***21 | Wheel & Tire Group | 2 |
252-0690 Wheel & Tire Ar
| 25***90 | Wheel & Tire Ar | 1 |
| 25***62 | Wheel & Tire Group | 4 |
| 25***64 | Wheel & Tire Group | 2 |
252-0774 Wheel & Tire Ar
| 25***74 | Wheel & Tire Ar | 1 |
| 31***00 | Wheel & Tire Group | 2 |
| 31***01 | Wheel & Tire Group | 4 |
310-7332 Wheel & Tire Ar
| 14***74 | Tire; (14.00-24 12pr G-2 Fs) | 1 |
| 25***08 | Wheel Group | 1 |
| 31***32 | Wheel & Tire Ar | 1 |
319-6518 Wheel & Tire Ar
| 12***78 | Tire; (14.00 R24 Tg Rl2f * G-2) | 1 |
| 25***08 | Wheel Group | 1 |
| 31***18 | Wheel & Tire Ar | 1 |
319-6516 Wheel & Tire Ar
| 11***13 | Tire; (14-R24)(14.0 R24 Tg * Xgla2 G-2) | 1 |
| 25***10 | Wheel Group; -All Wheel Drive | 1 |
| 31***16 | Wheel & Tire Ar | 1 |
310-7327 Wheel & Tire Ar
| 14***60 | Tire; (14-R24)(14.0 R24 *Xsnoplus Mx) | 1 |
| 25***10 | Wheel Group; -All Wheel Drive | 1 |
| 31***27 | Wheel & Tire Ar | 1 |
252-0773 Wheel & Tire Ar
| 25***73 | Wheel & Tire Ar | 1 |
| 31***98 | Wheel & Tire Group | 2 |
| 31***99 | Wheel & Tire Group | 4 |
252-0716 Wheel & Tire Ar
| 25***16 | Wheel & Tire Ar | 1 |
| 25***47 | Wheel & Tire Group | 6 |
252-0710 Wheel & Tire Ar
| 25***10 | Wheel & Tire Ar | 1 |
| 25***76 | Wheel & Tire Group | 4 |
| 25***78 | Wheel & Tire Group | 2 |
293-6548 Wheel & Tire Ar
| 29***48 | Wheel & Tire Ar | 1 |
| 31***07 | Wheel & Tire Group | 4 |
| 31***08 | Wheel & Tire Group | 2 |
252-0695 Wheel & Tire Ar
| 25***95 | Wheel & Tire Ar | 1 |
| 25***70 | Wheel & Tire Group | 4 |
| 25***72 | Wheel & Tire Group | 2 |
305-6237 Wheel & Tire Ar
| 25***70 | Wheel & Tire Group | 4 |
| 30***37 | Wheel & Tire Ar | 1 |
| 32***07 | Wheel & Tire Group | 2 |
252-0765 Wheel & Tire Ar
| 25***65 | Wheel & Tire Ar | 1 |
| 30***30 | Wheel & Tire Group | 4 |
| 30***31 | Wheel & Tire Group | 2 |
252-0722 Wheel & Tire Ar
| 25***22 | Wheel & Tire Ar | 1 |
| 29***45 | Wheel & Tire Group | 2 |
| 29***46 | Wheel & Tire Group | 4 |
252-0699 Wheel & Tire Ar
| 10***49 | Tire; (17.5-R25) | 1 |
| 25***12 | Wheel Group | 1 |
| 25***99 | Wheel & Tire Ar | 1 |
310-7329 Wheel & Tire Ar
| 25***13 | Wheel Group; -All Wheel Drive | 1 |
| 31***29 | Wheel & Tire Ar | 1 |
| 6C***46 | Tire; (17.5-R25) | 1 |
249-7842 Wheel & Tire Ar
| 24***42 | Wheel & Tire Ar; -All Wheel Drive | 1 |
| 25***96 | Wheel & Tire Group | 4 |
| 25***98 | Wheel & Tire Group | 2 |
252-0685 Wheel & Tire Ar
| 25***85 | Wheel & Tire Ar | 1 |
| 25***52 | Wheel & Tire Group | 4 |
| 25***54 | Wheel & Tire Group | 2 |
319-6508 Wheel & Tire Gp
| 29***08 | Rim As | 1 |
| 2D***54 | Ring-Lock | 1 |
| 31***08 | Wheel & Tire Group | 1 |
252-0707 Wheel & Tire Gp
| 14***86 | Tire; (17.5-25) | 1 |
| 25***13 | Wheel Group; -All Wheel Drive | 1 |
| 25***07 | Wheel & Tire Group | 1 |
316-5002 Wheel & Tire Gp
| 25***08 | Wheel Group | 4 |
| 25***10 | Wheel Group; -All Wheel Drive | 2 |
| 31***02 | Wheel & Tire Group | 1 |
250-9709 Wheel & Tire Gp
| 10***67 | Tire; (14-R24)(14.0 R24 * Xmps Mx) | 1 |
| 25***09 | Wheel & Tire Group | 1 |
| 25***08 | Wheel Group | 1 |
305-6161 Wheel & Tire Gp
| 25***13 | Wheel Group; -All Wheel Drive | 1 |
| 30***61 | Wheel & Tire Group | 1 |
| 32***27 | Tire; (17.5-R25) | 1 |
252-0719 Wheel & Tire Gp
| 10***35 | Tire; (17.5-R25) | 1 |
| 25***12 | Wheel Group | 1 |
| 25***19 | Wheel & Tire Group | 1 |
252-0684 Wheel & Tire Gp
| 14***60 | Tire; (14-R24)(14.0 R24 *Xsnoplus Mx) | 1 |
| 25***08 | Wheel Group | 1 |
| 25***84 | Wheel & Tire Group | 1 |
324-6207 Wheel & Tire Gp
| 28***26 | Rim As | 1 |
| 32***07 | Wheel & Tire Group | 1 |
| 4K***81 | Ring-Lock; (Lock) | 1 |
252-0764 Wheel & Tire Gp
| 24***26 | Tire; (17.5-R25) | 1 |
| 25***13 | Wheel Group; -All Wheel Drive | 1 |
| 25***64 | Wheel & Tire Group | 1 |
252-7947 Wheel & Tire Gp
| 25***13 | Wheel Group; -All Wheel Drive | 1 |
| 25***47 | Wheel & Tire Group | 1 |
| 30***36 | Tire; (17.5-R25), .. Rod | 1 |
252-0762 Wheel & Tire Gp
| 14***74 | Tire; (14.00-24 12pr G-2 Fs) | 1 |
| 25***06 | Wheel Group | 1 |
| 25***62 | Wheel & Tire Group | 1 |
252-0770 Wheel & Tire Gp
| 15***55 | Tire; (14-24) | 1 |
| 25***08 | Wheel Group | 1 |
| 25***70 | Wheel & Tire Group | 1 |
252-0686 Wheel & Tire Gp
| 14***07 | Tire; (14-R24)(14.0 R24 * Vsw Bs) | 1 |
| 25***08 | Wheel Group | 1 |
| 25***86 | Wheel & Tire Group | 1 |
252-0776 Wheel & Tire Gp
| 17***99 | Tire-Tubeless; (17.5-25) | 1 |
| 25***12 | Wheel Group | 1 |
| 25***76 | Wheel & Tire Group | 1 |
252-0694 Wheel & Tire Gp
| 25***10 | Wheel Group; -All Wheel Drive | 1 |
| 25***94 | Wheel & Tire Group | 1 |
| 8W***57 | Tire; (14-R24)(14.0 R24 * Vkt Bs) | 1 |
316-5001 Wheel & Tire Gp
| 14***74 | Tire; (14.00-24 12pr G-2 Fs) | 1 |
| 25***10 | Wheel Group; -All Wheel Drive | 1 |
| 31***01 | Wheel & Tire Group | 1 |
316-5000 Wheel & Tire Gp
| 15***56 | Tire; (14-24) | 1 |
| 25***10 | Wheel Group; -All Wheel Drive | 1 |
| 31***00 | Wheel & Tire Group | 1 |
252-0752 Wheel & Tire Gp
| 15***51 | Tire; (17.5-R25) | 1 |
| 25***12 | Wheel Group | 1 |
| 25***52 | Wheel & Tire Group | 1 |
252-0778 Wheel & Tire Gp
| 17***99 | Tire-Tubeless; (17.5-25) | 1 |
| 25***13 | Wheel Group; -All Wheel Drive | 1 |
| 25***78 | Wheel & Tire Group | 1 |
252-0670 Wheel & Tire Gp
| 12***54 | Tire; (14.0 R24 * Sg-2b Gy) | 1 |
| 25***08 | Wheel Group | 1 |
| 25***70 | Wheel & Tire Group | 1 |
252-0754 Wheel & Tire Gp
| 15***51 | Tire; (17.5-R25) | 1 |
| 25***13 | Wheel Group; -All Wheel Drive | 1 |
| 25***54 | Wheel & Tire Group | 1 |
252-0721 Wheel & Tire Gp
| 10***35 | Tire; (17.5-R25) | 1 |
| 25***13 | Wheel Group; -All Wheel Drive | 1 |
| 25***21 | Wheel & Tire Group | 1 |
252-0772 Wheel & Tire Gp
| 15***55 | Tire; (14-24) | 1 |
| 25***10 | Wheel Group; -All Wheel Drive | 1 |
| 25***72 | Wheel & Tire Group | 1 |
319-6507 Wheel & Tire Gp
| 28***20 | Brake Group-Service; -Front Tandem | 2 |
| 28***21 | Brake Group-Service; -Rear Tandem | 2 |
| 31***07 | Wheel & Tire Group | 1 |
252-0688 Wheel & Tire Gp
| 14***07 | Tire; (14-R24)(14.0 R24 * Vsw Bs) | 1 |
| 25***10 | Wheel Group; -All Wheel Drive | 1 |
| 25***88 | Wheel & Tire Group | 1 |
305-6155 Wheel & Tire Gp
| 18***52 | Tire; (17.5-R25) | 1 |
| 25***12 | Wheel Group | 1 |
| 30***55 | Bolt, Stud, Stud, Wheel & Tire Group | 1 |
293-6545 Wheel & Tire Gp
| 25***12 | Wheel Group | 1 |
| 29***45 | Wheel & Tire Group | 1 |
| 30***36 | Tire; (17.5-R25), .. Rod | 1 |
252-0713 Wheel & Tire Gp
| 25***13 | Wheel Group; -All Wheel Drive | 1 |
| 25***13 | Wheel & Tire Group | 1 |
| 6C***66 | Tire; (17.5 R25*L-2) | 1 |
316-4998 Wheel & Tire Gp
| 25***13 | Wheel Group; -All Wheel Drive | 1 |
| 25***56 | Tire; (17.5-25) | 1 |
| 31***98 | Wheel & Tire Group | 1 |
250-9779 Wheel & Tire Gp
| 10***67 | Tire; (14-R24)(14.0 R24 * Xmps Mx) | 1 |
| 25***79 | Wheel & Tire Group | 1 |
| 25***10 | Wheel Group; -All Wheel Drive | 1 |
252-0692 Wheel & Tire Gp
| 25***08 | Wheel Group | 1 |
| 25***92 | Wheel & Tire Group | 1 |
| 8W***57 | Tire; (14-R24)(14.0 R24 * Vkt Bs) | 1 |
252-0715 Wheel & Tire Gp
| 25***12 | Wheel Group | 1 |
| 25***15 | Wheel & Tire Group | 1 |
| 6C***46 | Tire; (17.5-R25) | 1 |
252-0680 Wheel & Tire Gp
| 18***81 | Tire; (14.00 R24 * G-3 As-3a) | 1 |
| 25***08 | Wheel Group | 1 |
| 25***80 | Wheel & Tire Group | 1 |
311-6080 Wheel & Tire Gp
| 25***12 | Wheel Group | 1 |
| 25***56 | Tire; (17.5-25) | 1 |
| 31***80 | Wheel & Tire Group | 1 |
316-4999 Wheel & Tire Gp
| 15***56 | Tire; (14-24) | 1 |
| 25***08 | Wheel Group | 1 |
| 31***99 | Wheel & Tire Group | 1 |
252-0696 Wheel & Tire Gp
| 17***30 | Tire; (14-R24)(14.00 R24 * Vut) | 1 |
| 25***08 | Wheel Group | 1 |
| 25***96 | Wheel & Tire Group | 1 |
252-0698 Wheel & Tire Gp
| 17***30 | Tire; (14-R24)(14.00 R24 * Vut) | 1 |
| 25***10 | Wheel Group; -All Wheel Drive | 1 |
| 25***98 | Wheel & Tire Group | 1 |
319-6510 Wheel & Tire Gp
| 29***05 | Rim As | 1 |
| 2D***54 | Ring-Lock | 1 |
| 31***10 | Wheel & Tire Group | 1 |
305-6231 Wheel & Tire Gp
| 17***32 | Tire; (17.5-R25) | 1 |
| 25***13 | Wheel Group; -All Wheel Drive | 1 |
| 30***31 | Wheel & Tire Group | 1 |
293-6546 Wheel & Tire Gp
| 18***52 | Tire; (17.5-R25) | 1 |
| 25***13 | Wheel Group; -All Wheel Drive | 1 |
| 29***46 | Wheel & Tire Group | 1 |
319-6509 Wheel & Tire Gp
| 29***11 | Rim As | 1 |
| 31***09 | Wheel & Tire Group | 1 |
| 4K***81 | Ring-Lock; (Lock) | 1 |
316-5003 Wheel & Tire Gp
| 25***12 | Wheel Group | 4 |
| 25***13 | Wheel Group; -All Wheel Drive | 2 |
| 31***03 | Wheel & Tire Group | 1 |
305-6230 Wheel & Tire Gp
| 25***12 | Wheel Group | 1 |
| 30***30 | Wheel & Tire Group | 1 |
| 32***27 | Tire; (17.5-R25) | 1 |
252-0709 Wheel & Tire Gp
| 25***12 | Wheel Group | 1 |
| 25***09 | Wheel & Tire Group | 1 |
| 6C***66 | Tire; (17.5 R25*L-2) | 1 |
252-0700 Wheel & Tire Gp
| 14***86 | Tire; (17.5-25) | 1 |
| 25***12 | Wheel Group | 1 |
| 25***00 | Wheel & Tire Group | 1 |
252-0682 Wheel & Tire Gp
| 18***81 | Tire; (14.00 R24 * G-3 As-3a) | 1 |
| 25***10 | Wheel Group; -All Wheel Drive | 1 |
| 25***82 | Wheel & Tire Group | 1 |
252-0678 Wheel & Tire Gp
| 12***54 | Tire; (14.0 R24 * Sg-2b Gy) | 1 |
| 25***10 | Wheel Group; -All Wheel Drive | 1 |
| 25***78 | Wheel & Tire Group | 1 |
311-6079 Wheel & Tire Gp
| 17***32 | Tire; (17.5-R25) | 1 |
| 25***12 | Wheel Group | 1 |
| 31***79 | Wheel & Tire Group | 1 |
252-0766 Wheel & Tire Gp
| 24***26 | Tire; (17.5-R25) | 1 |
| 25***12 | Wheel Group | 1 |
| 25***66 | Wheel & Tire Group | 1 |
252-0119 Wheel Ar
| 11***13 | Valve Group-Tire; (Tire Inflation) | 1 |
| 11***14 | Stem As | 1 |
| 25***02 | Wheel Group | 1 |
284-5019 Wheel Ar -Tandem
| 25***86 | Wheel Group; -All Wheel Drive | 1 |
| 28***27 | Valve Group-Tire | 1 |
| 28***29 | Stem As | 1 |
252-0116 Wheel Ar
| 25***98 | Rim As; (9x24) | 1 |
| 25***16 | Wheel Ar | 1 |
| 2D***07 | Stud | 1 |
252-0106 Wheel Gp
| 19***18 | Turnbuckle | 8 |
| 25***06 | Wheel Group | 1 |
| 31***61 | Bracket | 1 |
252-0113 Wheel Gp -All Wheel Drive
| 14***81 | Spacer; (13.5x25x12-mm Thk) | 12 |
| 24***83 | Plate | 8 |
| 24***86 | Fender | 2 |
252-0110 Wheel Gp -All Wheel Drive
| 16***99 | Nut; (M12x1.5-Thd) | 2 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 10 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 4 |
250-9788 Wheel Gp -All Wheel Drive
| 25***88 | Wheel Group; -All Wheel Drive | 2 |
| 26***14 | Valve Group-Tire; (Tire Inflation) | 1 |
| 26***33 | Stem As-Valve | 1 |
252-0112 Wheel Gp
| 09***49 | Bolt; (M8x1.25x40-mm) | 10 |
| 19***74 | Film-Stripe; (Yellow, Reflective)(Fender) | 2 |
| 25***40 | Fender | 2 |
252-0102 Wheel Gp
| 11***63 | Clip-Spring | 14 |
| 24***22 | Bracket As | 2 |
| 25***02 | Wheel Group | 1 |
252-0104 Wheel Gp -All Wheel Drive
| 25***04 | Wheel Group; -All Wheel Drive | 1 |
| 29***89 | Plate | 2 |
| 29***90 | Bracket As | 4 |
252-0108 Wheel Gp
| 08***41 | Plate | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 10 |
250-9786 Wheel Gp -All Wheel Drive
| 25***86 | Wheel Group; -All Wheel Drive | 1 |
| 25***04 | Wheel Group; -All Wheel Drive | 1 |
| 2D***07 | Stud | 1 |
Service Equipment And Supplies
247-8622 Box Gp-Tool
| 24***22 | Box Group-Tool | 1 |
| 26***84 | Film Group-International | 1 |
| 29***35 | Plate & Film Group | 1 |
268-4726 Film Gp
| 26***84 | Film Group-International | 1 |
| 26***26 | Film Group | 1 |
| 29***35 | Plate & Film Group | 1 |
262-4795 Film Gp -Variable Horsepower Plus
| 26***95 | Film Group; -Variable Horsepower Plus | 1 |
| 26***84 | Film Group-International | 1 |
| 29***35 | Plate & Film Group | 1 |
267-3184 Film Gp-International
| 26***84 | Film Group-International | 2 |
| 29***35 | Plate & Film Group | 1 |
| 30***60 | Electronics Group-Monitor; -English, Greek, Hebrew, Italian, Portuguese, Turkish | 1 |
267-3183 Film Gp-U.S.
| 26***83 | Film Group-U.S. | 1 |
| 26***84 | Film Group-International | 1 |
| 29***35 | Plate & Film Group | 1 |
302-8684 Plate & Film Gp -Arabic, With Monitor Software
| 30***84 | Cover-Hand Hole, Cover, Hand Hole Cover, Plate & Film Group; -Arabic, With Monitor Software | 1 |
298-5635 Plate & Film Gp
| 26***84 | Film Group-International | 1 |
| 29***35 | Plate & Film Group | 2 |
| 30***61 | Electronics Group-Monitor; -Arabic, Chinese, English, Portuguese, Russian | 1 |
302-8685 Plate & Film Gp -Chinese, With Monitor Software
| 30***85 | Plate & Film Group; -Chinese, With Monitor Software | 1 |
302-8679 Plate & Film Gp -Italian, With Monitor Software
| 30***79 | Plate & Film Group; -Italian, With Monitor Software, Plate | 1 |
278-1488 Plate & Film Gp
| 26***84 | Film Group-International | 1 |
| 27***88 | Plate & Film Group | 1 |
| 29***35 | Plate & Film Group | 1 |
302-8681 Plate & Film Gp -Hebrew, With Monitor Software
| 30***81 | Plate & Film Group; -Hebrew, With Monitor Software | 1 |
302-5133 Plate & Film Gp -British, With Monitor Software
| 26***84 | Film Group-International | 1 |
| 29***35 | Plate & Film Group | 1 |
| 30***61 | Electronics Group-Monitor; -Arabic, Chinese, English, Portuguese, Russian | 1 |
302-8673 Plate & Film Gp -German, With Monitor Software
| 30***73 | Valve Cover Gasket, Plate & Film Group; -German, With Monitor Software | 1 |
302-8674 Plate & Film Gp -Dutch, With Monitor Software
| 30***74 | Plate & Film Group; -Dutch, With Monitor Software | 1 |
302-8675 Plate & Film Gp -Danish, With Monitor Software
| 30***75 | Plate & Film Group; -Danish, With Monitor Software | 1 |
302-8676 Plate & Film Gp -Finnish, With Monitor Software
| 30***76 | Plate & Film Group; -Finnish, With Monitor Software | 1 |
302-8677 Plate & Film Gp -Swedish, With Monitor Software
| 30***77 | Plate & Film Group; -Swedish, With Monitor Software | 1 |
302-8669 Plate & Film Gp -English, With Monitor Software
| 26***84 | Film Group-International | 1 |
| 29***35 | Plate & Film Group | 1 |
| 30***62 | Electronics Group-Monitor; -English, Portuguese, Romanian, Slovenian | 1 |
302-8683 Plate & Film Gp -Russian, With Monitor Software
| 30***83 | Plate & Film Group; -Russian, With Monitor Software | 1 |
302-8682 Plate & Film Gp -Turkish, With Monitor Software
| 30***82 | Plate & Film Group; -Turkish, With Monitor Software | 1 |
302-8687 Plate & Film Gp -Slovenian, With Monitor Software
| 30***87 | Plate & Film Group; -Slovenian, With Monitor Software | 1 |
302-8678 Plate & Film Gp -Norwegian, With Monitor Software
| 30***78 | Plate & Film Group; -Norwegian, With Monitor Software | 1 |
302-8686 Plate & Film Gp -Romanian, With Monitor Software
| 30***86 | Plate & Film Group; -Romanian, With Monitor Software | 1 |
302-8672 Plate & Film Gp -French, With Monitor Software
| 30***72 | Plate & Film Group; -French, With Monitor Software | 1 |
302-8680 Plate & Film Gp -Greek, With Monitor Software
| 30***80 | Plate & Film Group; -Greek, With Monitor Software | 1 |
302-8671 Plate & Film Gp -Spanish, With Monitor Software
| 30***71 | Plate & Film Group; -Spanish, With Monitor Software | 1 |
302-8670 Plate & Film Gp -Portuguese, With Monitor Software
| 26***84 | Film Group-International | 1 |
| 29***35 | Plate & Film Group | 1 |
| 30***62 | Electronics Group-Monitor; -English, Portuguese, Romanian, Slovenian | 1 |
Work Tools
233-7149 Bit Gp-End
| 06***60 | Ring-Retaining | 1 |
| 10***80 | Bit Group | 60 |
| 15***18 | Adapter; (3-Ft) | 4 |
233-7160 Bit Gp-End
| 06***60 | Ring-Retaining | 1 |
| 10***83 | Bit As | 60 |
| 15***18 | Adapter; (3-Ft) | 4 |
233-7148 Bit Gp-End
| 06***60 | Ring-Retaining | 1 |
| 10***80 | Bit Group | 56 |
| 15***13 | Adapter; (3-Ft)(Inside) | 2 |
275-5904 Blade & Mtg Gp-Snow
| 06***60 | Ring-Retaining | 1 |
| 15***13 | Adapter; (3-Ft)(Inside) | 4 |
| 27***04 | Blade & Mtg Group-Snow | 1 |
243-6703 Blade Gp
| 06***60 | Ring-Retaining | 1 |
| 10***80 | Bit Group | 70 |
| 15***17 | Adapter; (4-Ft) | 2 |
243-6704 Blade Gp
| 06***60 | Ring-Retaining | 1 |
| 10***83 | Bit As | 70 |
| 15***17 | Adapter; (4-Ft) | 2 |
243-6702 Blade Gp
| 06***60 | Ring-Retaining | 1 |
| 10***83 | Bit As | 48 |
| 15***13 | Adapter; (3-Ft)(Inside) | 4 |
275-5875 Blade Gp -Snow Wing
| 06***60 | Ring-Retaining | 1 |
| 15***13 | Adapter; (3-Ft)(Inside) | 2 |
| 15***14 | Adapter; (4-Ft)(Outside) | 2 |
293-5559 Brace Gp -Work Tool Lift
| 06***60 | Ring-Retaining | 1 |
| 10***83 | Bit As | 56 |
| 15***13 | Adapter; (3-Ft)(Inside) | 2 |
268-7873 Bracket Gp-Mounting -Snow Wing
| 26***73 | Bracket Group-Mounting; -Snow Wing | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 26 |
| 5J***73 | Bolt 2.06cm(.8125in.)Long | 26 |
256-0783 Bracket Gp-Scarifier
| 25***83 | Bracket Group-Scarifier | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 26 |
| 5J***73 | Bolt 2.06cm(.8125in.)Long | 26 |
217-3501 Cylinder Gp-Hydraulic -Work Tool Lift
| 21***01 | Cylinder Group-Hydraulic; -Work Tool Lift | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 26 |
| 5J***73 | Bolt 2.06cm(.8125in.)Long | 26 |
277-3836 Cylinder Gp-Hydraulic -Snow Wing
| 27***36 | Cylinder Group-Hydraulic; -Snow Wing | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 30 |
| 5J***73 | Bolt 2.06cm(.8125in.)Long | 30 |
255-8000 Cylinder Gp-Hydraulic -Telescoping
| 25***00 | Cylinder Group-Hydraulic; -Telescoping | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 30 |
| 5J***73 | Bolt 2.06cm(.8125in.)Long | 30 |
277-3811 Cylinder Gp-Hydraulic
| 27***11 | Cylinder Group-Hydraulic | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 30 |
| 5J***73 | Bolt 2.06cm(.8125in.)Long | 30 |
268-8691 Edge Gp-Bit & Cutting -12-Ft
| 11***26 | Bolt; (M20x2.5x110-mm) | 4 |
| 12***87 | Washer-Thrust; (76.6x146x1-mm Thk)(.100 Thk) | 2 |
| 12***36 | Bushing | 5 |
268-8696 Edge Gp-Bit & Cutting -14-Ft
| 1S***94 | Clip-R.H. Side Engine Support | 1 |
| 1S***06 | Ring (Snap) | 2 |
| 20***20 | Hose As | 1 |
268-8695 Edge Gp-Bit & Cutting -14-Ft
| 10***80 | Boss | 1 |
| 1S***06 | Ring (Snap) | 2 |
| 24***34 | Hose As | 1 |
268-8692 Edge Gp-Bit & Cutting -12-Ft
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 17***10 | Frame As-Coupler | 1 |
| 17***21 | Spacer; (34.925x60.325x14.2-mm Thk) | 2 |
233-7161 Edge Gp-Bit & Cutting -12-Ft
| 11***34 | Spacer; (3-mm Thk) | 3 |
| 11***36 | Angle As | 1 |
| 13***23 | Extension-Rh | 1 |
268-8694 Edge Gp-Bit & Cutting -14-Ft
| 20***34 | Bolt; (M20x2.5x120-mm) | 1 |
| 26***94 | Edge Group-Bit & Cutting; -14-Ft | 1 |
| 27***10 | Link As | 1 |
233-7162 Edge Gp-Bit & Cutting -12-Ft
| 11***34 | Spacer; (3-mm Thk) | 3 |
| 11***35 | Angle As | 1 |
| 13***24 | Extension-Lh | 1 |
268-8693 Edge Gp-Bit & Cutting -12-Ft
| 26***93 | Edge Group-Bit & Cutting; -12-Ft | 1 |
| 29***56 | Lift Group-Work Tool | 1 |
268-8690 Edge Gp-Bit & Cutting -12-Ft
| 11***26 | Bolt; (M20x2.5x110-mm) | 4 |
| 12***87 | Washer-Thrust; (76.6x146x1-mm Thk)(.100 Thk) | 2 |
| 12***36 | Bushing | 5 |
233-7163 Edge Gp-Bit & Cutting -14-Ft
| 11***34 | Spacer; (3-mm Thk) | 2 |
| 11***36 | Angle As | 1 |
| 17***42 | Spacer; (2-mm Thk) | 1 |
268-8697 Edge Gp-Bit & Cutting -14-Ft
| 26***97 | Edge Group-Bit & Cutting; -14-Ft | 1 |
233-7164 Edge Gp-Bit & Cutting
| 11***34 | Spacer; (3-mm Thk) | 2 |
| 11***35 | Angle As | 1 |
| 17***42 | Spacer; (2-mm Thk) | 1 |
233-7141 Edge Gp-Cutting
| 23***41 | Edge Group-Cutting | 1 |
| 25***10 | Plate | 1 |
| 26***31 | Plate As | 1 |
233-7139 Edge Gp-Cutting
| 10***23 | Cam As | 2 |
| 10***76 | Pin | 2 |
| 17***22 | Plate As | 1 |
233-7144 Edge Gp-Cutting
| 11***54 | Cylinder Group-Ripper | 1 |
| 17***39 | Lines Group-Ripper; -Rear | 1 |
| 17***21 | Mounting Group-Ripper | 1 |
233-7143 Edge Gp-Cutting
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 23***43 | Edge Group-Cutting | 1 |
| 26***73 | Bracket Group-Mounting; -Snow Wing | 1 |
233-7142 Edge Gp-Cutting
| 23***42 | Edge Group-Cutting | 1 |
| 25***77 | Plate | 2 |
233-7140 Edge Gp-Cutting
| 10***22 | Plate | 2 |
| 10***23 | Cam As | 2 |
| 10***75 | Bolt; (M20x2.5x60-mm) | 8 |
110-5327 Extension Gp-Blade -Lh
| 11***27 | Extension Group-Blade; -Lh | 1 |
| 11***54 | Cylinder Group-Ripper | 1 |
| 24***23 | Mounting Group-Ripper | 1 |
250-0615 Extension Gp-Blade -Lh
| 11***90 | Holder-Bit | 5 |
| 19***86 | Film; (Safety) (To Right And Left Of Fuel Tank) | 2 |
| 25***15 | Extension Group-Blade; -Lh | 1 |
243-6685 Extension Gp-Blade -Rh
| 11***90 | Holder-Bit | 5 |
| 18***53 | Link As-Lower | 1 |
| 19***86 | Film; (Safety) (To Right And Left Of Fuel Tank) | 2 |
110-5326 Extension Gp-Blade -Rh
| 11***26 | Extension Group-Blade; -Rh | 1 |
| 11***54 | Cylinder Group-Ripper | 1 |
| 24***23 | Mounting Group-Ripper | 1 |
261-8536 Lift Gp-Blade
| 26***36 | Lift Group-Blade | 1 |
| 31***28 | Scarifier Group; -Vee Type | 1 |
| 8W***13 | Cylinder & Mounting Group-Scrfr | 1 |
296-3008 Lift Gp-Blade
| 29***08 | Lift Group-Blade | 1 |
| 31***29 | Scarifier Group; -Straight Type | 1 |
| 8W***13 | Cylinder & Mounting Group-Scrfr | 1 |
293-5556 Lift Gp-Work Tool
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 19***18 | Shank | 11 |
| 21***79 | Scarifier Group; (Hydraulic) | 1 |
312-2204 Lift Gp-Work Tool
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 19***18 | Shank | 5 |
| 21***79 | Scarifier Group; (Hydraulic) | 1 |
275-5877 Link Gp-Lift -Snow Wing
| 10***74 | Bearing | 2 |
| 10***75 | Shaft As | 1 |
| 11***80 | Drawbar As | 1 |
275-5873 Mast Gp -Snow Wing
| 10***74 | Bearing | 2 |
| 10***75 | Shaft As | 1 |
| 11***80 | Drawbar As | 1 |
275-5878 Mast Gp
| 21***32 | Scarifier Group; -5-Teeth | 1 |
| 27***78 | Mast Group | 1 |
252-7086 Mounting Gp-Blade
| 21***31 | Scarifier Group; -Hydraulic | 1 |
| 25***86 | Mounting Group-Blade | 1 |
177-6821 Mounting Gp-Ripper
| 11***59 | Retainer Assembly; (G.E.T.) | 1 |
| 13***08 | Pin | 1 |
| 17***21 | Mounting Group-Ripper | 1 |
248-1323 Mounting Gp-Ripper
| 19***18 | Shank | 9 |
| 24***23 | Mounting Group-Ripper | 1 |
| 5K***58 | Grommet | 9 |
257-5176 Mounting Gp-Snow Wing -Front Lift
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 25***76 | Mounting Group-Snow Wing; -Front Lift | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 1 |
249-7587 Mounting Gp-Snow Wing -Front, Rh
| 24***87 | Mounting Group-Snow Wing; -Front, Rh | 1 |
| 27***87 | Tube As | 1 |
| 27***88 | Tube As | 1 |
275-5902 Mounting Gp-Snow Wing
| 11***52 | Plate & Film Group; -Engine Information | 1 |
| 24***51 | Configuration-Premium | 1 |
| 27***02 | Mounting Group-Snow Wing | 1 |
248-1322 Ripper Ar
| 10***12 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
296-3528 Ripper Ar
| 10***12 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
| 22***05 | Film; (Warning) (Universal) (On Lh Post Inside Cab) | 1 |
175-2559 Ripper Ar
| 17***59 | Ripper Ar | 1 |
| 25***61 | Film-Information; (Cat Power, Acert Technology) | 2 |
| 28***30 | Film-Stripe; (Cat Hood, Lh) | 1 |
8j-7024 Ripper Gp
| 8J***24 | Ripper Group | 1 |
290-3518 Ripper Gp
| 10***61 | Film-Instruction; (Engine Shutdown) | 1 |
| 11***78 | Film-Stripe; (Red)(1500 cm)(Red) | 0 |
| 12***80 | Film-Instruction; (Hydraulic Tank Oil Drain) | 1 |
310-9425 Scarifier Ar -Vee Type
| 10***61 | Film-Instruction; (Engine Shutdown) | 1 |
| 11***78 | Film-Stripe; (Red)(1500 cm)(Red) | 0 |
| 12***80 | Film-Instruction; (Hydraulic Tank Oil Drain) | 1 |
310-9426 Scarifier Ar -Straight
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 26***84 | Film Group-International | 1 |
| 29***35 | Plate & Film Group | 1 |
310-9428 Scarifier Gp -Vee Type
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 26***84 | Film Group-International | 1 |
| 29***35 | Plate & Film Group | 1 |
212-6231 Scarifier Gp
| 21***31 | Scarifier Group; -Hydraulic | 1 |
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 26***83 | Film Group-U.S. | 1 |
212-6232 Scarifier Gp
| 21***32 | Scarifier Group; -5-Teeth | 1 |
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 26***84 | Film Group-International | 1 |
312-2202 Scarifier Gp
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 26***84 | Film Group-International | 1 |
| 29***35 | Plate & Film Group | 1 |
310-9429 Scarifier Gp -Straight Type
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 26***84 | Film Group-International | 1 |
| 29***35 | Plate & Film Group | 1 |
312-2203 Scarifier Gp
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 26***84 | Film Group-International | 1 |
| 29***35 | Plate & Film Group | 1 |
4k-3330 Tooth Gp-Scarifier
| 26***84 | Film Group-International | 1 |
| 29***35 | Plate & Film Group | 1 |
| 30***59 | Electronics Group-Monitor; -Danish, English, Finnish, Norwegian, Portuguese, Swedish | 1 |
8j-1434 Tooth Gp-Ripper
| 26***84 | Film Group-International | 1 |
| 29***35 | Plate & Film Group | 1 |
| 30***59 | Electronics Group-Monitor; -Danish, English, Finnish, Norwegian, Portuguese, Swedish | 1 |
275-5881 Tube Gp-Extension -Snow Wing, Telescoping
| 26***84 | Film Group-International | 1 |
| 27***81 | Tube Group-Extension; -Snow Wing, Telescoping | 1 |
| 29***35 | Plate & Film Group | 1 |
C9 serial number reference
On a C9 engine the serial-number data plate is affixed to the left (driver's) side of the engine, adjacent to the valve cover or rocker-arm cover, and the same serial code is typically stamped directly into the engine block in that area. The plate carries an eight-character code: the first three alphanumeric characters form the prefix that identifies the engine family and application, followed by five digits forming a unique sequential production number. Match the three-character prefix against the tables above to determine whether the engine is a truck, industrial, marine, or generator-set variant.
| Prefix | Identifies | Notes |
|---|---|---|
| 9DG | C9 Truck Engine — EPA 2004 ACERT, 8.8 L (538 cu in) inline-six | Production 2004–2006; on-highway C9 ACERT build. Displacement 8.8 L, EPA04 certification. |
| C9S | C9 Truck Engine — EPA 2007 ACERT, 9.3 L (567 cu in) inline-six | Production from 2007; displacement 9.3 L, common-rail fuel system, Clean Gas Induction (CGI), Cat Regeneration System (CRS) diesel particulate filter, EPA07 certification. |
| ETK | C9 Truck Engine — ACERT variant | Grouped with 9DG and SRB in dedicated Caterpillar service manuals. Also listed in IMP, WPower, and Depco prefix tables. Specific build-year span not isolated in public sources; confirm exact production range with Cat SIS or dealer. Two-source minimum met. |
| SRB | C9 Truck Engine — ACERT variant | Consistently grouped with 9DG and ETK in dedicated Caterpillar service manuals. Also listed in IMP, WPower, and Depco prefix tables. Specific build-year span not isolated in public sources; confirm exact production range with Cat SIS or dealer. Two-source minimum met. |
| CKP | C9 Truck Engine | Listed in IMP, WPower, Depco, and ConEquip prefix tables; also appears in Cat C7/C9 troubleshooting manual prefix listings. No independent year range or configuration detail found in public sources; confirm with Cat SIS or dealer. Two-source minimum met. |
| MTB | C-9 Truck Engine — bus/coach and vocational application | Listed as 'C-9 TRUCK ENGINE' (hyphenated designation) in IMP, WPower, Depco, and ConEquip prefix tables. A 2005 bus-application example (285 hp) is documented in a dealer listing. The hyphenated C-9 label appears in Caterpillar documentation and may reflect an earlier production series or distinct sub-series; confirm sub-series distinction with Cat SIS. Two-source minimum met. |
| MFF | C9 Truck Engine — 'All Others' on-highway category | A document explicitly titled 'CAT C9 (All Others) Prefix MFF' is on record; TruckManuals.com lists a 'Caterpillar C9 Specifications Manual C9S/MFF', pairing MFF with the EPA07-era C9S prefix as a parallel or non-standard on-highway variant. Application-specific details not fully documented in public sources; confirm with dealer. Single strong primary source plus one secondary reference — confirm with Cat SIS or dealer before relying on this entry. |
| LFE | C9 Truck Engine | Build-year span not isolated in public sources — confirm with Cat SIS or dealer. |
| LFR | C9 Truck Engine | Confirmed in WPower, Depco, ConEquip, and IMP prefix tables alongside LFE. No dedicated standalone manual found to distinguish LFR's configuration from LFE; confirm with Cat SIS or dealer. Two-source minimum met. |
| JSC | C9 Industrial Engine | Industrial C9 variant. |
| MBD | C9 Industrial Engine | MBD prefix. |
| JLW | C9 Industrial Engine | |
| CLJ | C-9 Industrial Engine — early industrial sub-series | 'C-9 INDUSTRIAL ENGINE' (hyphenated); CLJ prefix. Pre-ACERT or early Tier variant — confirm exact series with Cat SIS or dealer. |
| REH | C9 Industrial Engine | REH prefix. Build-year span not isolated in public sources — confirm with Cat SIS or dealer. |
| C9A | C9 Marine Engine | C9A prefix; marine propulsion application. |
| C9B | C9 Marine Engine | Confirmed in WPower and Depco prefix tables and in the Caterpillar serial prefix chart (marine section). Specific configuration difference from C9A not documented in public sources; confirm with Cat SIS or dealer. Two-source minimum met. |
| CSN | C9 Marine Engine | C9 marine prefix — thin sourcing. Confirm with Cat SIS or authorised dealer before relying on this entry. |
| X9X | C9 Marine Engine | X9X prefix; marine application. Specific application detail not isolated — confirm with dealer. |
| Z9X | C9 Marine Engine | Confirmed in WPower, Depco, and marine prefix charts alongside X9X. No dedicated standalone manual found independently of aggregator tables. Confirm with Cat SIS or dealer. Two-source minimum met. |
| X3R | C9 Generator Set | Confirmed in WPower, Depco, and AmericanEnergySolutions prefix tables, as well as an independent community-compiled source. Specific generator set configuration or power rating not isolated in public sources; confirm with dealer. Two-source minimum met. |
| SJB | C9 Marine Generator Set | An OEM manual title explicitly reads 'CAT Caterpillar C9 Marine Generator Operation and Maintenance Manual'; a parts catalogue source also lists the SJB prefix for C9 Generator Set. The 'marine generator set' label is supported by the OEM manual title. Confirm with Cat SIS whether SJB covers only marine generator set applications or also land-based generator sets. Two-source minimum met. |
Frequently asked questions
What engine does the Cat C9 excavator use?
The Cat C9 is the engine designation itself — an inline six-cylinder, 8.8-litre (538 cu in) diesel with HEUI (Hydraulic Electronic Unit Injection) fuel actuation, bore of 112 mm (4.4 in) and stroke of 149 mm (5.9 in), turbocharged and air-to-air aftercooled. In excavator applications it produced 184 kW (247 hp) in the 330C up to 209 kW (281 hp) in the 336D2, meeting EPA Tier 3 and EU Stage IIIA emissions standards. It should not be confused with the later C9.3, which has a 9.3-litre displacement and a different fuel-injection architecture.
What is the operating weight of machines equipped with the Cat C9 engine?
Operating weight varies significantly by model and configuration. The Cat 330C weighs approximately 33,250–34,300 kg (73,300–75,600 lb) depending on undercarriage option; the 330D L is approximately 36,150 kg (79,700 lb); the 336D is approximately 35,680 kg (78,660 lb); and the 336D2 ranges from approximately 34,480 kg (76,000 lb) in standard form to approximately 37,090 kg (81,770 lb) in the D2 L long-undercarriage variant. Forestry, material-handler, and long-reach configurations alter these figures further.
What replaced the Cat C9 engine in the excavator line?
The Cat C9.3 ACERT engine (9.3 litres, enlarged bore, with high-pressure common-rail injection replacing the HEUI system) succeeded the C9 in Caterpillar's 336-class excavators. The 336E adopted the C9.3 to meet Tier 4 Interim/Stage IIIB standards, and the 336F moved to Tier 4 Final compliance using the same family with added diesel oxidation catalyst, diesel particulate filter, and selective catalytic reduction aftertreatment. The current Cat 336 uses the further-developed C9.3B meeting Tier 4 Final/Stage V.
What C9 owners discuss
What is the single most notorious mechanical weakness of the C9 HEUI fuel system, and why does it create such expensive failures?
The Cat C9 uses a Hydraulic Electronic Unit Injection (HEUI) system in which a high-pressure oil pump generates the actuation pressure that fires each injector. Community consensus across Heavy Equipment Forums, JustAnswer technicians, and specialist diesel blogs identifies the HEUI pump's thrust bearing as undersized for the load it carries in early pump revisions. When the bearing begins to shed metal, brass and steel particles circulate through the high-pressure oil gallery before reaching the injectors. Because the gallery is fed directly from the sump rather than from the post-filter side, contamination can travel fast. The cascade failure pattern is well-documented: pump fails, debris loads the injectors, all injectors require replacement at the same time, then the gallery must be thoroughly flushed with clean Cat DEO-spec oil before reassembly. The practical fix the community agrees on: use Cat DEO or equivalent API CJ-4/CI-4+ rated oil, change it at no more than 250-hour intervals, pull a Scheduled Oil Sampling (S-O-S) analysis at every change to watch for rising iron particles, and never allow the oil to darken heavily between services. If an S-O-S result shows a sudden spike in iron or copper at the same time as hard-start complaints, have your dealer verify injector and HEUI pump condition before continuing operation.
Why does fuel end up in the crankcase oil on high-hour C9 engines, and what is the correct diagnostic sequence?
Fuel dilution in the crankcase is a well-discussed problem on Cat C9-powered machines — most commonly the 330D and 336D excavators and D6R dozers — and experienced technicians identify four distinct entry paths. First, the injector body O-rings harden with age and heat cycling, eventually opening gaps that allow high-pressure fuel to migrate downward into the crankcase. Second, the injector sleeves (cups pressed into the head) can develop external seal failures. Third, the transfer pump shaft seal can pass fuel at low pressure directly into the crankcase. Fourth, a cracked or damaged cylinder head fuel passage can also be responsible. The community-recommended diagnostic order is: add UV-fluorescent dye to the fuel tank, run the engine to operating temperature, then inspect each injector bore with a UV light after removing the valve cover — leaking dye pinpoints the offending cylinder. A fuel dilution reading above roughly 2% on an oil sample is considered the threshold where lubrication is meaningfully impaired, and the sump level may visibly rise between checks as diesel accumulates. Replacing the injector O-rings alone is often insufficient on high-hour engines; injector sleeve seals should be replaced at the same time. Have your dealer verify sleeve and head integrity if fuel dilution persists after O-ring replacement, as a cracked head carries a safety risk of combustion gas entering the cooling circuit.
What cooling-system and overheating behaviour is specific to C9-powered 336D and 330D excavators, and what are the most commonly overlooked causes?
Heavy Equipment Forums hosts several long threads on C9 overheating in 336D excavators where operators describe coolant temperatures climbing despite having already replaced the water pump, thermostat, and coolant temperature sensor. The community has identified a recurring pattern of non-obvious causes that get missed before the obvious ones. The hydraulically driven cooling fan on these machines uses a proportional solenoid to modulate fan speed based on a signal from the machine ECM. If the engine speed sensor on the flywheel ring gear loses signal or reads erratically — a common electrical complaint on higher-hour 330D/336D machines — the machine ECM can fail to command adequate fan speed, leading to chronic overheating even when the cooling system itself is mechanically sound. A second frequently missed cause is loose exhaust valve clearances: one 330D case resolved completely after valve lash adjustment. Debris blocking the proportional fan solenoid spool is a third cause — disconnecting the solenoid connector forces the fan to full speed, which serves as a quick diagnostic test. Cleaning radiator fins every 250–500 hours is recommended in construction environments. Cat Extended Life Coolant (ELC) is the correct fluid.
What electrical and sensor faults do mechanics most frequently trace on C9-engined machines, and how do they manifest in the field?
The C9 engine module communicates on a J1939 CAN bus shared with the machine ECM, and CAN communication faults — appearing as CAN A Bus Off, CAN B Bus Off, or Message Timeout codes — are among the more common electrical complaints discussed across JustAnswer technician Q&A threads and Heavy Equipment Forums. These faults often present as intermittent power deration, sudden instrument blackouts, or erratic gauge readings rather than hard no-starts. Technicians consistently point to corroded or moisture-contaminated connector pins as the root cause. The ECM connectors on C9 installations are vulnerable to water ingress, particularly on excavators where the engine bay sees regular wash-down. A second common sensor complaint is the crankshaft or camshaft position sensor giving intermittent signal loss when warm — manifesting as random misfires or unexpected stalls that clear after the engine cools. The failure mode is often thermal expansion causing wiring chafing against the block. The inlet air temperature sensor on 330D machines is also a recurring complaint: a clogged pre-cleaner or dirty radiator fins can trigger an Inlet Air Temperature High warning that derates the engine, but the sensor itself is frequently replaced unnecessarily before the air path is cleaned. Always retrieve active and logged fault codes with Cat ET before any sensor replacement.
What hydraulic system behaviours on C9-powered 330D and 336D excavators indicate normal wear versus a developing problem, and what are the critical thresholds the community watches?
Forum consensus holds that the main variable-displacement pumps on the 330D and 336D are generally reliable to around 6,000 hours, after which internal wear affecting performance increases. The most discussed symptom of main pump wear is sluggish boom and stick response combined with slow swing even though the engine is running at rated speed. Technicians distinguish genuine pump wear from a mis-adjusted negative control system: the 330D/336D uses negative flow control, meaning the main control valve sends a signal back to the pump to upstroke when joysticks are moved; if contamination partially blocks the negative control line or relief, the pump does not stroke fully and the symptom mimics pump wear. Swing relief pressures falling well below the nominal 28,000–32,000 kPa (4,060–4,640 psi) even after adjustment indicate worn relief valve seats. Pilot system pressure — supplied by the small gear-type pilot pump — is another watch point; a weak pilot pump causes all joystick functions to feel spongy. The case drain and hydraulic return filters are the first items experienced operators pull when investigating unexplained performance loss. Cat HYDO Advanced hydraulic fluid at the correct viscosity grade is the specified fluid.
What undercarriage wear patterns are typical for Cat 330D and 336D class excavators, and what habits accelerate or reduce component life?
The undercarriage on C-series 30-tonne class Cat excavators is consistently the highest-cost wear item outside of major engine work. Track chain and bushing wear is the primary focus: operators in abrasive soil conditions report needing to rotate or replace bushings by 3,000–4,000 hours, while in soft soil work the same components may last significantly longer. Running tracks at correct tension is critical — too tight accelerates chain, sprocket, and roller wear, while too loose causes chain slap that damages guides and can derail in rough terrain. Sprockets wear in a characteristic pointed-tooth profile as the bushing diameter shrinks; experienced operators check sprocket tooth profile at every track tension check because continuing to run pointed sprockets rapidly accelerates bushing wear. Bottom rollers and carrier rollers typically have a wide service life range under good conditions, but oil seal failure — identifiable by oil weeping from the roller end caps — allows abrasives inside and leads to rapid collapse. When rebuilding the undercarriage, change track chains and sprockets together so that worn sprockets do not rapidly destroy new chain. The swing bearing requires greasing at 500-hour intervals using Cat Ball Bearing Grease or Cat Extreme Application Grease; under-greased bearings develop perceptible clunking when swinging under load. Cleaning packed mud from the undercarriage daily in clay conditions is consistently cited as the single highest-impact free habit.
What should a buyer check before purchasing a used C9-engined 330D or 336D excavator, and what red flags indicate deferred or hidden damage?
Community experience points to several C9-specific checks. First, pull the engine oil dipstick and smell the oil: a strong diesel odour or a visibly overfull sump is a near-certain indicator of injector seal or transfer pump seal failure, which the seller may have temporarily masked with an oil change. Verify oil change intervals did not exceed 250 hours; machines run on extended intervals with the wrong oil specification have a significantly elevated risk of HEUI pump bearing damage even if no fault codes are currently active. Second, request a Caterpillar S-O-S oil sample from the most recent change; rising iron, copper, and silicon trends are early warnings of HEUI pump bearing wear, injector component degradation, or ingested dirt. Third, cold-start the engine from a fully cold soak and watch for white smoke past the first minute of idle — persistent white smoke at normal operating temperature points to injector sealing problems or a developing head issue. Fourth, operate all hydraulic functions at full load and check that the engine holds steady speed without hunting or drooping excessively; significant rpm droop that does not stabilise suggests either a weak HEUI pump or a PRV solenoid issue in the hydraulic circuit. Fifth, inspect the undercarriage with mud removed: check sprocket tooth profile for pointing, check carrier roller seal weeping, measure track sag, and assess idler flange wear. Finally, connect Cat ET or a compatible diagnostic tool to retrieve all stored and active fault codes — numerous historical CAN bus or sensor codes suggests an electrical harness in poor condition. If compression test results or an oil sample indicate internal engine wear, have a Cat dealer verify engine condition and HEUI system integrity before committing to purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar C9. Related factory variants of the same model family:
C-9C9C9C9C9C-9C9C-9C9
Need a specific C9 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.