Caterpillarengine - generator setgenerator set
Caterpillar C3.3
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar C3.3 is a compact diesel generator set (genset) built around Cat's own C3.3 engine, a 3-cylinder, 3.3-liter (201 cu in) inline four-stroke diesel derived from the Perkins 1103 platform that Cat inherited when it acquired Perkins in 1997. The line spans roughly 24 to 65 kVA (about 19 to 52 kW at 0.8 power factor) across 50 Hz and 60 Hz models, offered in standby and prime ratings. Dry weight runs from about 750 kg (1650 lb) on the smallest open-skid, naturally aspirated 33 kVA-class units up to roughly 1030 kg (2270 lb) on the largest turbocharged, canopied 65 kVA units; exact weight varies by kVA rating, aspiration, and enclosure. No single documented predecessor or successor model carries the C3.3 name forward; it sits below Cat's larger-displacement C4.4 genset family in the compact power range and has stayed in production across multiple emissions tiers for different regional markets. Configurations include open skid-mounted sets, weather-protective and sound-attenuated canopy enclosures, mechanical-governor control, and rental-spec packages with an integral base fuel tank, all built around a single-bearing, self-excited alternator.
Within the C3.3 family the main variation is aspiration and output tier: naturally aspirated versions cover the lower end of the kVA range with a higher compression ratio, while turbocharged versions with a lower compression ratio cover the upper end near 65 kVA. Packaging has broadened to include rental-oriented trailer and skid packages that share a maintenance manual with the sibling C4.4 rental gensets, sound-attenuated enclosures for noise-sensitive sites, and digital monitoring options layered onto the base mechanical-governor design. In the used and parts market the C3.3 matters because it is one of Cat's highest-volume compact gensets, deployed heavily in telecom backup, construction-site power, rental fleets, and remote or prime applications, and because its Perkins 1103 engine architecture shares design lineage and serviceable-parts commonality with the wider Perkins 1103 family, which keeps aftermarket support and rebuild parts relatively accessible for a machine of this size.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar C3.3 specifications
Engine
| Engine model | Cat C3.3, in-line 3-cylinder, 4-stroke diesel. Naturally aspirated on lower-output packages (approx. 24-33 kVA class); turbocharged on higher-output packages (approx. 37.5-75 kVA class). |
| Displacement | 3.3 L (201.4 cu in) |
| Bore x stroke | 105.0 mm x 127.0 mm (4.1 in x 5.0 in) |
| Compression ratio | 19.25:1 (naturally aspirated packages) or 17.25:1 (turbocharged packages) |
| Governor | Mechanical, ISO 8528 load acceptance class G2 |
| Gross engine power - naturally aspirated package (1500/1800 rpm) | Standby 31.0 kW (42 hp) at 1500 rpm, 36.5 kW (49 hp) at 1800 rpm; Prime 28.2 kW (38 hp) at 1500 rpm, 33.1 kW (44 hp) at 1800 rpm |
| Gross engine power - mid turbocharged package (1500/1800 rpm) | Standby 46.5 kW (62 hp) at 1500 rpm, 55.6 kW (75 hp) at 1800 rpm; Prime 42.2 kW (57 hp) at 1500 rpm, 50.5 kW (68 hp) at 1800 rpm |
| Gross engine power - high-output turbocharged package (1500/1800 rpm) | Standby 60.5 kW (81 hp) at 1500 rpm, 69.6 kW (93 hp) at 1800 rpm; Prime 55.0 kW (74 hp) at 1500 rpm, 63.3 kW (85 hp) at 1800 rpm |
| Emissions strategy | European-market spec sheets list a non-certified emissions strategy, R96/EU Stage IIIA equivalent. North American dealer listings also show EPA Tier 3 certified C3.3 genset packages for the domestic market - emissions certification varies by market and package. |
Weights
| Net weight (with lube oil) | 814-874 kg (1795-1926 lb), varies by generator package/output class |
| Wet weight (with lube oil and coolant) | 826-887 kg (1821-1955 lb), varies by generator package/output class |
| Shipping weight (with fuel, lube oil and coolant) | 949 to 1072 kg (2092-2364 lb), varies by generator package/output class |
| Ground pressure | Not published - stationary skid-mounted generator set, no undercarriage |
Dimensions
| Transport length | 1540-1925 mm (60.6-75.8 in), varies by generator package/output class |
| Transport width | 760 to 1120 mm (29.9-44.1 in), varies by generator package/output class |
| Transport height | 1333-1361 mm (52.5-53.6 in), varies by generator package/output class |
| Wheelbase / track gauge / ground clearance | Not applicable - stationary skid-mounted package, no undercarriage or running gear |
Performance
| Engine speed | 1500 rpm (50 Hz) or 1800 rpm (60 Hz) |
| Standby power range | 33.0-75.0 kVA (26.4-60.0 kW), depending on voltage and package configuration |
| Prime power range | 30.0-71.5 kVA (24.0-57.2 kW), depending on voltage and package configuration |
| Motor starting capability | 55-158 kVA depending on voltage configuration (based on 30% voltage dip at 0.6 power factor) |
| Voltage regulation (steady state) | ±0.5% to ±1.0%, varies by alternator frame/AVR |
| Generator overspeed trip | 2250 rpm |
| Short circuit capacity | 300% (higher-output packages, with optional permanent magnet generator) |
| Travel speed / gradeability | Not applicable - stationary generator set with no travel or traction system |
Service capacities (summary)
| Fuel tank (sub-base) | 161 L (42.5 US gal) on lower-output packages up to 219 L (57.9 US gal) on higher-output packages - varies by configuration |
| Cooling system capacity | 10.2 L (2.7 US gal), consistent across documented packages |
| Engine oil, total (with filter) | 8.3 L (2.2 US gal); oil pan capacity 7.8 L (2.1 US gal) |
| Hydraulic system | Not applicable - diesel generator set has no hydraulic system |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
C3.3 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | approx. 7.6 L (2.0 US gal) — figure not published on Cat's genset spec sheets; confirm against the dipstick/nameplate for the exact package, since sump size can shift slightly with oil pan and filter configuration | Cat DEO-ULS or Cat DEO diesel engine oil, SAE 15W-40 as the standard grade. Colder climates step down to Cat DEO-ULS SYN (SAE 5W-40) or Cat DEO Cold Weather (SAE 0W-40); SAE 10W-30 covers a broader cold-to-moderate band. Oil must meet Cat ECF-3 / API CJ-4 or equivalent performance level. |
| Cooling system | 10.2 L (2.7 US gal) total coolant capacity — consistent across C3.3 genset packages spanning the naturally aspirated and turbocharged variants (roughly 24-65 kVA range) | Cat ELC (Extended Life Coolant), premixed, fill to within 13 mm (0.5 in) of the filler neck or sight glass. Cat DEAC (Diesel Engine Antifreeze/Coolant) or a commercial heavy-duty coolant meeting the Cat EC-1 specification is an accepted alternative; do not mix ELC with conventional supplemental coolant additives (SCA). |
| Fuel tank | 161 L (42.5 US gal) base-mounted tank on the smaller (30/33 kVA) package; larger kVA packages and sound-attenuated enclosures use bigger sub-base tanks — capacity varies by configuration, verify against the specific model's spec sheet | Ultra-low-sulfur No. 2-D diesel meeting ASTM D975, or Class A2 diesel meeting EN590 for European-spec units. Biodiesel blends are supported but Cat recommends capping standby/seasonal-use generator sets at B5 unless fuel quality and turnover are closely managed. |
| Grease — generator bearing(s) | spec only; regrease volume is small (on the order of tens of grams per bearing) and depends on frame/bearing size | Cat-specified NLGI 2 multipurpose bearing lubricant for standard ball-bearing frames, regreased every 2000 service hours or 12 months. Larger roller-bearing frames use a synthetic grease equivalent to Mobilith SHC 220 on a 250-hour interval. Sealed, non-regreasable bearings are packed for life with a lithium-complex grease equivalent to Unirex N3. Do not mix grease types. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar C3.3 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
| Every 12,000 h |
|
Servicing the C3.3 beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S oil analysis every engine oil change to track wear metals and catch bearing or injector problems early. Sample coolant at Level 1 intervals on conventional DEAC coolant, or rely on the annual Level 2 test if the system runs Cat ELC. Watch the fuel filter and oil filter for rising differential pressure as an early plugging signal. Log generator bearing temperature and vibration trend data at each 2000-hour interval so a drifting reading, not a failure, triggers the repair.
Corrective & Common Repairs
Most field repairs trace back to fuel quality: injector tip wear, hard starting, and black smoke mean water or dirt got past the primary filter/water separator, so drain it daily and replace elements on schedule. A weeping water pump seal beyond a light film calls for seal or pump replacement before overheating cracks the head. Loose or glazed alternator belts cause charging faults; retension or replace them to spec. A failed rotating rectifier diode shows up as loss of excitation or unstable voltage and is confirmed with a diode check.
Overhaul & Rebuild Points
Valve lash needs inspection and adjustment at the first oil change on a new, rebuilt, or overhauled engine, then again at scheduled intervals as parts wear in. Fuel injection nozzles get tested and exchanged as a set once tip wear affects spray pattern rather than one cylinder at a time. Generator bearings come out for inspection and, if worn or corroded, replacement at every major engine overhaul. Track oil consumption against the original baseline; once it triples, plan the overhaul before a bearing or ring failure forces an unplanned teardown.
Seasonal & Environment Servicing
Cold climates call for battery electrolyte checks and a full charge before start-up season, since a weak battery cranks poorly and freezes faster; keep coolant at the correct ELC or DEAC concentration for the expected low temperature. Hot, dusty sites shorten air cleaner element life and load the radiator with debris, so inspect the service indicator and clean the core more often than standard. Humid or coastal sites accelerate generator winding insulation breakdown; run space heaters when the set sits idle and step up insulation resistance testing.
C3.3 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1R-1803 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 207-2757 | Seal | Fuel system service | Check fitment → |
| 266-2793 | Filter Element-Air | Air intake service | Check fitment → |
| 264-6375 | Element As-Engine Oil Heater | Lubrication service | Check fitment → |
| 7W-2327 | Filter As-Engine Oil | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
C3.3 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 100 FMI 01 | Engine oil pressure low | Low oil level, worn or clogged oil pump/filter, failing oil pressure sensor or wiring | Check oil level and condition first, then verify pressure with a mechanical gauge before condemning the sensor |
| CID 110 FMI 00 | Engine coolant temperature high | Low coolant, blocked radiator core, slipping or failed fan drive, stuck thermostat, overload | Check coolant level and radiator for debris, confirm fan operation, verify sender reading against a manual thermometer |
| CID 190 FMI 00 | Engine overspeed shutdown | Governor linkage binding or maladjusted, sudden loss of load (load rejection), faulty magnetic pickup signal | Inspect mechanical governor linkage for binding, check load history for rejection events, verify speed sensor air gap and wiring |
| CID 190 FMI 02 | Engine/magnetic pickup speed signal erratic or lost | Damaged or fouled magnetic pickup (MPU), incorrect sensor air gap, chafed harness | Reset air gap per spec, inspect MPU and connector for damage or debris, check harness continuity |
| CID 111 FMI 01 | Coolant level low | External coolant leak, low initial fill, failed level sensor/float | Inspect hoses, water pump and radiator for leaks, top off coolant to correct level, verify sensor operation |
| CID 168 FMI 04 | Battery/charging system voltage low | Weak or discharged starting battery, failed charging alternator, corroded or loose battery connections | Load-test the battery, check charging alternator output and belt, clean and tighten terminals |
| CID 96 FMI 01 | Fuel level low | Tank running low, faulty fuel level sender | Refuel and confirm level reading, check sender/float if reading does not match actual tank level |
| Emergency Stop (E-Stop) alarm | Genset shut down by the hardwired emergency stop circuit | E-stop button pressed, stuck or faulty E-stop switch, open circuit in the E-stop loop | Confirm no button is latched, inspect E-stop wiring loop for continuity, reset per control panel procedure |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
C3.3 attachments & work tools
Machine type note
The C3.3 in this size class is a diesel generator set (genset), not an excavator or loader. It has no bucket, hammer, or coupler-type work tools. "Attachments" here means factory enclosure, fuel, control, and cooling configurations offered for the set.
Power range and speed
C3.3 gensets are offered from about 24 to 65 kVA at 50 Hz and roughly 27 to 60 kW at 60 Hz, running at 1500 rpm (50 Hz) or the corresponding 60 Hz speed. Exact top-end rating varies by configuration/series and emissions level.
Enclosure options
Open (skid) sets are the base configuration. Weather-protective and sound-attenuated enclosures are offered in at least two acoustic levels, with galvanized-steel construction on the standard sound-attenuated version and a higher-spec version for CE markets. A rental-pack enclosure variant is offered in some regions.
Fuel system and base/tank configurations
Standard open sets use a formed-steel base with an integral single-wall fuel tank sized for roughly 8 hours running at rated load. A bunded (double-wall, containment) fuel tank option is offered for spill compliance, along with a compact skidbase for open sets and a separate skidbase suited to enclosed sets. Low-fuel and high-fuel level alarms/shutdowns are optional.
Control panel / switchgear
The set is fitted standard with the Cat GCCP 1.3 generator control panel, a compact controller for this power class rather than the larger EMCP panels used on bigger Cat gensets. Options include speed/voltage adjustment potentiometers, battery charger, panel heater, earth-fault/leakage detection, audible alarm packages, and emergency-stop with key isolation.
Circuit breaker
Standard breaker is an IEC-rated 3-pole unit mounted in the control tower panel. An optional 4-pole breaker rated up to 250A with a padlockable (lockout) breaker device is available for installations needing neutral switching or added lockout safety.
Cooling package
Standard cooling is a radiator and engine-driven fan with guarding fitted as part of the base package. Optional coolant heater (for cold-start readiness), low-coolant-level shutdown, and low-coolant-temperature alarm are available.
Handling and mounting provisions
Base packages include lifting/lug provisions and drag (tow) points for site placement; enclosed sets add a single-point external lift option. No trailer-mounted mobile version is documented specifically for the C3.3 class — mobile trailer gensets are a larger-kW Cat product line.
Guarding and safety options
Enclosed and open sets can be specified with rotating-part and exhaust guarding as part of the enclosure/canopy package, plus the padlockable breaker and key-isolated emergency stop noted above for lockout-tagout compliance on site.
All C3.3 assemblies by section
Every catalogued assembly group for the Caterpillar C3.3. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
275-2158 Elbow Gp-Air Inlet
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
| 11***22 | Bolt; (M8x16-mm) | 4 |
| 11***79 | Gasket | 1 |
266-5732 Filter Gp-Air -Primary
| 14***90 | Band-Mounting | 1 |
| 15***66 | Valve | 1 |
| 25***08 | Indicator-Air Filter Change | 1 |
263-1285 Filter Gp-Air -Cleaner
| 14***90 | Band-Mounting | 1 |
| 15***66 | Valve | 1 |
| 26***85 | Filter Group-Air; -Cleaner | 1 |
282-4987 Filter Gp-Air
| 12***65 | Clamp-Hose | 1 |
| 25***23 | Bracket As | 1 |
| 26***73 | Bolt; (M10x1.5x65-mm) | 2 |
266-5733 Filter Gp-Air
| 25***23 | Bracket As | 1 |
| 26***73 | Bolt; (M10x1.5x65-mm) | 2 |
| 26***78 | Bolt; (M8x1.25x30-mm)(Marked Y) | 2 |
268-4788 Fitting Gp-Exhaust
| 03***25 | Clamp As | 1 |
| 26***11 | Bracket-Support | 1 |
| 26***88 | Fitting Group-Exhaust | 1 |
268-4786 Fitting Gp-Exhaust
| 03***25 | Clamp As | 3 |
| 06***07 | Cap-Rain | 1 |
| 26***35 | Connector-Tube | 1 |
268-4785 Fitting Gp-Exhaust
| 03***25 | Clamp As | 3 |
| 26***37 | Bellows | 1 |
| 26***10 | Elbow-Tube | 1 |
268-4787 Fitting Gp-Exhaust
| 03***25 | Clamp As | 1 |
| 26***35 | Connector-Tube | 1 |
| 26***87 | Fitting Group-Exhaust | 1 |
268-4789 Fitting Gp-Exhaust
| 03***25 | Clamp As | 1 |
| 26***37 | Bellows | 1 |
| 26***10 | Elbow-Tube | 1 |
275-2191 Manifold Gp-Exhaust
| 17***38 | Bolt | 6 |
| 27***45 | Manifold-Exhaust | 1 |
| 27***46 | Gasket | 1 |
275-2267 Mounting Gp-Exhaust
| 27***47 | Gasket | 1 |
| 27***67 | Mounting Group-Exhaust | 1 |
| 6I***63 | Nut; (M10x1.15-Thd) | 3 |
268-4821 Silencer As
| 26***21 | Silencer As | 1 |
268-4822 Silencer As
| 26***22 | Silencer As | 1 |
269-5713 Silencer Gp
| 03***25 | Clamp As | 4 |
| 08***89 | Clamp-Exhaust Pipe | 2 |
| 23***54 | Nut; (M10x1.15-Thd) | 8 |
302-7114 Silencer Gp
| 03***25 | Clamp As | 3 |
| 26***40 | Bellows | 1 |
| 26***88 | Tube-Exhaust | 1 |
280-0806 Silencer Gp-Inlet
| 03***25 | Clamp As | 3 |
| 08***89 | Clamp-Exhaust Pipe | 5 |
| 21***08 | Bolt; (M8x1.25x25-mm) | 6 |
266-5738 Silencer Gp-Inlet
| 03***25 | Clamp As | 3 |
| 08***89 | Clamp-Exhaust Pipe | 1 |
| 25***08 | Silencer As | 1 |
269-5691 Silencer Gp-Inlet
| 03***25 | Clamp As | 6 |
| 06***07 | Cap-Rain | 1 |
| 25***97 | Silencer As | 1 |
266-5750 Silencer Gp-Inlet
| 03***25 | Clamp As | 3 |
| 08***89 | Clamp-Exhaust Pipe | 6 |
| 11***85 | Spacer; (10.5x19x11.5-mm Thk) | 4 |
Basic Engine
289-0489 Camshaft Gp
| 06***95 | Rod | 6 |
| 13***53 | Tappet | 6 |
| 1B***36 | Key-Woodruff | 1 |
267-9604 Coupling Gp
| 26***04 | Coupling Group | 1 |
| 27***83 | Plate | 4 |
| 6F***30 | Bolt-- Starting Engine Fuel Tank Bracket To Tank | 8 |
273-1610 Cover Gp-Engine Lifting Eye
| 13***40 | Locknut; (M8x1.25-Thd) | 1 |
| 26***87 | Bolt; (M8x1.25x50-mm) | 1 |
| 27***10 | Cover Group-Engine Lifting Eye | 1 |
275-1198 Cover Gp-Valve Mechanism
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 13***08 | Cap As; (Engine Oil Filler) | 1 |
| 19***45 | Screw | 4 |
275-1197 Cover Gp-Valve Mechanism
| 10***38 | Bolt; (M6x20-mm) | 2 |
| 15***32 | Seal-O-Ring | 1 |
| 22***22 | Plug-Cup | 1 |
320-2863 Cover Gp-Valve Mechanism
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 13***08 | Cap As; (Engine Oil Filler) | 2 |
| 19***45 | Screw | 4 |
273-9335 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 0 |
275-0169 Cylinder Block Gp
| 20***19 | Bolt; (M8x1.25x16-mm) | 10 |
| 23***49 | Housing As | 1 |
| 27***01 | Cylinder Block Group | 1 |
274-4701 Cylinder Block Gp
| 03***63 | Plug | 1 |
| 03***68 | Bolt; (5/8-18x3.75-In) | 8 |
| 06***02 | Dowel | 8 |
303-8483 Cylinder Head As
| 06***06 | Plug | 3 |
| 14***79 | Retainer-Valve Spring | 12 |
| 18***82 | Guide-Valve | 6 |
273-9327 Cylinder Head Gp
| 27***27 | Cylinder Head Group | 1 |
| 27***75 | Gasket-Cylinder Head | 1 |
| 30***83 | Cylinder Head As | 1 |
268-2602 Drain Gp-Engine Oil
| 15***04 | Adapter | 1 |
| 15***50 | Nut-Bulkhead; (1/2-In Bsp) | 1 |
| 17***52 | Washer; (Sealing) | 1 |
274-0019 Drive Gp-Fan
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 13***79 | Pulley-Fan Drive | 1 |
| 23***65 | Spring Extension, Housing As | 1 |
275-1055 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 6 |
| 27***78 | Flywheel As | 1 |
317-9291 Housing Gp-Flywheel
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 28***97 | Dowel | 2 |
| 31***91 | Housing Group-Flywheel | 1 |
275-1046 Housing Gp-Flywheel
| 06***23 | Dowel | 2 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
284-6533 Housing Gp-Flywheel
| 10***17 | Plug | 3 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
275-2035 Housing Gp-Front
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 9 |
275-2451 Lifting Gp-Engine
| 10***30 | Bolt; (M10x1.5x20-mm) | 4 |
| 22***48 | Plate-Lifting | 1 |
| 27***51 | Lifting Group-Engine | 1 |
263-0393 Lifting Gp-Engine
| 12***80 | Locknut; (M12x1.75-Thd) | 8 |
| 26***01 | Washer; (25x60x0.32-mm Thk) | 1 |
| 26***32 | Lifting As | 1 |
275-2610 Mounting Gp-Engine
| 11***12 | Nut; (M160x2-Thd) | 2 |
| 27***89 | Bracket | 1 |
| 27***90 | Bracket | 1 |
269-5580 Mounting Gp-Engine
| 26***31 | Mount As | 4 |
| 26***80 | Mounting Group-Engine | 1 |
| 7X***52 | Bolt-Plt; (M16 X 2.0 X 30) | 4 |
262-2707 Mounting Gp-Engine
| 26***06 | Mount As | 4 |
| 26***07 | Mounting Group-Engine | 1 |
| 8T***39 | Capscrew; (Hex Hd) (M12 X 1.75 X 30l Gr 10.9) | 8 |
263-0386 Mounting Gp-Engine
| 26***30 | Mount As | 4 |
| 26***86 | Mounting Group-Engine | 1 |
| 7X***52 | Bolt-Plt; (M16 X 2.0 X 30) | 4 |
269-5579 Mounting Gp-Engine
| 26***29 | Mount As | 4 |
| 26***79 | Mounting Group-Engine | 1 |
| 8T***89 | Locknut; (M10x1.15-Thd) | 8 |
266-5736 Mounting Gp-Engine
| 26***19 | Mount As | 4 |
| 26***36 | Mounting Group-Engine | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 4 |
266-5680 Mounting Gp-Engine & Generator
| 25***99 | Beam-Support; (Engine) | 1 |
| 26***04 | Beam As | 1 |
| 26***80 | Mounting Group-Engine & Generator | 1 |
262-2704 Mounting Gp-Engine & Generator
| 25***98 | Beam As; (Alternator) | 1 |
| 25***99 | Beam-Support; (Engine) | 1 |
| 26***04 | Mounting Group-Engine & Generator | 1 |
275-7539 Mounting Gp-Engine & Generator
| 27***35 | Support As-Generator | 1 |
| 27***39 | Mounting Group-Engine & Generator | 1 |
| 27***18 | Support-Engine | 1 |
275-7617 Mounting Gp-Engine & Generator
| 27***34 | Beam-Support | 1 |
| 27***16 | Beam As-Support | 1 |
| 27***17 | Mounting Group-Engine & Generator | 1 |
263-0319 Mounting Gp-Engine & Generator
| 25***60 | Beam-Support | 1 |
| 25***15 | Plate-Packing | 4 |
| 26***19 | Mounting Group-Engine & Generator | 1 |
275-7548 Mounting Gp-Engine & Generator
| 27***46 | Beam As-Support | 1 |
| 27***48 | Mounting Group-Engine & Generator | 1 |
| 27***18 | Support-Engine | 1 |
271-8225 Mounting Gp-Engine & Generator
| 27***64 | Beam As | 1 |
| 27***25 | Mounting Group-Engine & Generator | 1 |
| 27***34 | Beam-Support | 1 |
282-6123 Mounting Gp-Engine & Generator
| 28***23 | Mounting Group-Engine & Generator | 1 |
| 28***26 | Beam As; (Generator) | 1 |
| 28***27 | Beam; (Engine) | 1 |
263-0389 Mounting Gp-Engine & Generator
| 25***91 | Beam As | 1 |
| 25***60 | Beam-Support | 1 |
| 26***89 | Mounting Group-Engine & Generator | 1 |
274-4691 Pan Gp-Oil
| 06***13 | Gasket | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 4 |
| 12***02 | Tube As | 1 |
275-1182 Pan Gp-Oil
| 06***13 | Gasket | 1 |
| 10***51 | Bolt; (M8x1.25x130-mm) | 2 |
| 12***02 | Tube As | 1 |
275-0898 Piston Gp
| 12***36 | Ring-Retaining | 2 |
| 22***38 | Bushing | 1 |
| 22***39 | Bolt-Special; (Connecting Rod) | 2 |
275-2620 Plug Gp-Engine
| 27***20 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 2 |
| 7W***69 | Adapter; (Lubricating Oil Cooler) | 1 |
274-4712 Plug Gp-Engine
| 27***12 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
289-3329 Plug Gp-Engine
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 28***29 | Plug Group-Engine | 1 |
289-3272 Plug Gp-Engine
| 03***63 | Plug | 1 |
| 19***67 | Seal-O-Ring | 1 |
| 23***61 | Plug; (Blanking) | 1 |
289-2130 Plug Gp-Engine
| 21***03 | Washer; (Sealing) | 1 |
| 28***30 | Plug Group-Engine | 1 |
| 6I***46 | Bolt; (M10x1.5x14-mm) | 1 |
275-1264 Pulley Gp-Crankshaft
| 27***64 | Pulley Group-Crankshaft | 1 |
| 6I***01 | Block | 1 |
| 7W***34 | Bolt; (7/16-20x1.5-In) | 3 |
273-9288 Rocker Arm Gp
| 18***46 | Screw | 2 |
| 22***25 | Lever As | 3 |
| 22***29 | Plug | 2 |
274-0005 Valve Mechanism Gp
| 27***88 | Rocker Arm Group | 1 |
| 27***05 | Valve Mechanism Group | 1 |
Cooling System
258-5310 Bracket Gp-Radiator
| 23***54 | Nut; (M10x1.15-Thd) | 2 |
| 25***07 | Bracket-Radiator | 1 |
| 25***09 | Bracket Group-Radiator | 1 |
275-1280 Connection Gp-Water
| 25***67 | Regulator Group-Temperature; (Includes Connector)(Water) | 1 |
| 25***70 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
| 27***80 | Connection Group-Water | 1 |
289-3983 Cooler Gp-Fltr Base & Eng Oil
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 12***81 | Clip | 1 |
| 22***41 | Plug | 1 |
274-4703 Cooler Gp-Fltr Base & Eng Oil
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 12***81 | Clip | 1 |
| 12***30 | Hose | 1 |
266-5786 Drain Gp-Coolant
| 15***30 | Adapter | 1 |
| 26***02 | Connector | 1 |
| 26***03 | Adapter | 2 |
266-5731 Drain Gp-Coolant
| 15***30 | Adapter | 1 |
| 26***02 | Connector | 1 |
| 26***03 | Adapter | 2 |
266-5797 Drain Gp-Coolant
| 25***22 | Hose As | 1 |
| 26***51 | Adapter-Pipe; (Bulkhead) | 1 |
| 26***02 | Connector | 1 |
266-5767 Flange Gp-Radiator
| 14***14 | Screw-Self-Tapping; (No 8x0.5-In) | 20 |
| 26***61 | Strap | 2 |
| 26***62 | Strap | 2 |
258-5293 Guard Gp-Fan
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 7 |
| 25***93 | Guard Group-Fan | 1 |
| 28***65 | Guard As; (Lh) | 1 |
268-6170 Guard Gp-Radiator
| 26***40 | Cover | 1 |
| 26***70 | Guard Group-Radiator | 1 |
258-5354 Hose Gp-Radiator
| 12***65 | Clamp-Hose | 2 |
| 14***67 | Clamp-Hose | 2 |
| 25***54 | Hose Group-Radiator | 1 |
289-1626 Mounting Gp-Fan
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 4 |
| 13***68 | Stud | 4 |
| 13***69 | Extension-Fan | 1 |
272-0482 Mounting Gp-Radiator
| 26***78 | Bolt; (M8x1.25x30-mm)(Marked Y) | 4 |
| 27***81 | Frame As-Radiator | 1 |
| 27***82 | Mounting Group-Radiator | 1 |
343-4602 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 2 |
| 22***38 | Seal-O-Ring | 1 |
274-4767 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 2 |
| 22***38 | Seal-O-Ring | 1 |
274-4715 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 2 |
| 22***38 | Seal-O-Ring | 1 |
271-8306 Radiator Gp
| 21***74 | Cap-Pressure; (16-Psi)(Radiator) | 0 |
| 26***91 | Radiator As | 1 |
| 26***96 | Fan | 1 |
266-5734 Radiator Gp
| 26***73 | Radiator As | 1 |
| 26***96 | Fan | 1 |
| 26***34 | Radiator Group | 1 |
277-6481 Support Gp-Radiator
| 26***78 | Bolt; (M8x1.25x30-mm)(Marked Y) | 4 |
| 26***94 | Lockwasher | 4 |
| 27***81 | Frame As-Radiator | 1 |
277-6482 Support Gp-Radiator
| 25***15 | Frame As-Radiator | 1 |
| 26***32 | Mount As | 2 |
| 26***39 | Bolt-Self-Locking; (M8x1.25x12-mm) | 4 |
268-5284 Tank Gp-Water
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 26***89 | Clamp; (Hose) | 2 |
Electrical And Starting System
289-2012 Alternator Gp-Charging
| 06***66 | Washer | 1 |
| 10***51 | Bolt; (M8x1.25x130-mm) | 1 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 1 |
271-1311 Battery & Mounting Gp
| 14***59 | Bolt; (M6x1x275-mm) | 2 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 2 |
| 26***54 | Plate-Fixing | 1 |
266-9668 Battery Charger
| 26***68 | Battery Charger | 1 |
260-1011 Battery Charger
| 26***11 | Battery Charger | 1 |
266-5726 Battery Gp
| 14***59 | Bolt; (M6x1x275-mm) | 2 |
| 26***54 | Plate-Fixing | 1 |
| 26***26 | Battery Group | 1 |
266-5717 Battery Gp
| 26***78 | Bolt; (M8x1.25x30-mm)(Marked Y) | 2 |
| 26***34 | Bracket | 2 |
| 26***17 | Battery Group | 1 |
266-5769 Battery Gp
| 14***59 | Bolt; (M6x1x275-mm) | 2 |
| 26***53 | Support-Battery | 1 |
| 26***69 | Battery Group | 1 |
268-1432 Box & Mounting Gp
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 2 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 2 |
| 09***92 | Washer, Tooth | 4 |
282-4975 Box As-Control
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 2 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 2 |
| 09***92 | Washer, Tooth | 8 |
274-6373 Box Gp-Control -Communication
| 14***14 | Screw-Self-Tapping; (No 8x0.5-In) | 4 |
| 27***71 | Control Group-Communication; -Common Control-Panel | 1 |
| 27***73 | Box Group-Control; -Communication | 1 |
270-3045 Cable As -Alternator, Circuit Breaker
| 15***50 | Cable; (00-Ga, Black)(183-cm Each) | 0 |
| 21***42 | Wire-Electrical; (Blue)(228-cm) | 0 |
| 21***90 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 4 |
270-3043 Cable As -Alternator, Circuit Breaker
| 27***40 | Sleeve; (80-cm) | 0 |
| 27***43 | Cable As; -Alternator, Circuit Breaker | 1 |
| 5P***54 | Terminal-Ring; (4-Ga, 5/16-In Screw) | 5 |
270-3042 Cable As -Alternator, Circuit Breaker
| 27***40 | Sleeve; (80-cm) | 0 |
| 27***42 | Cable As; -Alternator, Circuit Breaker | 1 |
| 5P***55 | Terminal-Ring; (8-Ga, 5/16-In Screw) | 5 |
270-3041 Cable As -Alternator, Circuit Breaker
| 27***40 | Sleeve; (80-cm) | 0 |
| 27***41 | Cable As; -Alternator, Circuit Breaker | 1 |
| 5P***55 | Terminal-Ring; (8-Ga, 5/16-In Screw) | 2 |
270-3044 Cable As -Alternator, Circuit Breaker
| 27***40 | Sleeve; (80-cm) | 0 |
| 27***44 | Cable As; -Alternator, Circuit Breaker | 1 |
| 5P***97 | Cable; (1-Ga)(183-cm Each) | 0 |
266-5681 Cable Gp-Battery
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 1 |
| 26***51 | Terminal As-Battery; (Positive)(2 Awg) | 1 |
268-4825 Cable Gp-Battery
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 1 |
268-4818 Cable Gp-Battery
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 1 |
| 26***51 | Terminal As-Battery; (Positive)(2 Awg) | 1 |
268-4824 Cable Gp-Battery
| 26***24 | Cable Group-Battery | 1 |
| 26***25 | Cable Group-Battery | 1 |
| 26***26 | Cable Group-Battery | 1 |
273-4346 Cable Gp-Battery
| 03***11 | Terminal-Ring; (2-Ga, 5/16-In Screw) | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 1 |
268-4826 Cable Gp-Battery
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 1 |
| 26***53 | Terminal As-Battery; (Negative)(2 Awg) | 1 |
311-1095 Circuit Breaker As
| 26***79 | Screw-Machine; (M4x0.7x70-mm) | 2 |
| 31***95 | Circuit Breaker As | 1 |
| 5C***12 | Nut (M4x0.7 Thd) | 2 |
311-1093 Circuit Breaker As
| 26***79 | Screw-Machine; (M4x0.7x70-mm) | 2 |
| 31***93 | Circuit Breaker As | 1 |
| 5C***12 | Nut (M4x0.7 Thd) | 2 |
281-7002 Circuit Breaker Gp -400-Ampere
| 26***13 | Circuit Breaker As; (400-Ampere) | 1 |
| 26***25 | Terminal-Circuit Breaker; (S5) | 1 |
| 28***02 | Circuit Breaker Group; -400-Ampere | 1 |
266-4301 Circuit Breaker Gp -150 Ampere
| 26***94 | Link; (Breaker) | 3 |
| 26***11 | Circuit Breaker As; (150-Ampere) | 1 |
| 26***24 | Terminal; (Breaker) | 1 |
266-4309 Circuit Breaker Gp -250-Ampere
| 26***12 | Circuit Breaker As; (250-Ampere) | 1 |
| 26***24 | Terminal; (Breaker) | 1 |
| 26***09 | Circuit Breaker Group; -250-Ampere | 1 |
266-4303 Circuit Breaker Gp -40 Ampere
| 26***05 | Circuit Breaker As; (40-Ampere) | 1 |
| 26***24 | Terminal; (Breaker) | 1 |
| 26***03 | Circuit Breaker Group; -40-Ampere | 1 |
281-6998 Circuit Breaker Gp -400-Ampere
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 1 |
| 26***13 | Circuit Breaker As; (400-Ampere) | 1 |
| 26***25 | Terminal-Circuit Breaker; (S5) | 1 |
266-3241 Circuit Breaker Gp -40-Ampere
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 16***16 | Insulator | 2 |
| 26***27 | Circuit Breaker As; (40-Ampere) | 1 |
266-4305 Circuit Breaker Gp -60-Ampere
| 26***07 | Circuit Breaker As; (60-Ampere) | 1 |
| 26***24 | Terminal; (Breaker) | 1 |
| 26***05 | Circuit Breaker Group; -60-Ampere | 1 |
266-4298 Circuit Breaker Gp -80 Ampere
| 26***64 | Link; (Breaker) | 3 |
| 26***08 | Circuit Breaker As; (80-Ampere) | 1 |
| 26***24 | Terminal; (Breaker) | 1 |
268-1451 Circuit Breaker Gp
| 12***46 | Lockwasher | 8 |
| 14***56 | Insulator | 4 |
| 26***03 | Plate | 1 |
266-4307 Circuit Breaker Gp -100-Ampere
| 26***09 | Circuit Breaker As; (100-Ampere) | 1 |
| 26***24 | Terminal; (Breaker) | 1 |
| 26***07 | Circuit Breaker Group; -100-Ampere | 1 |
268-1438 Circuit Breaker Gp
| 14***89 | Block-Terminal | 1 |
| 20***59 | Rail; (4.4-Dm Each) | 0 |
| 24***07 | Screw-Machine; (M6x1x12-mm)(European Sourced) | 3 |
266-3242 Circuit Breaker Gp
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 16***16 | Insulator | 2 |
| 26***28 | Circuit Breaker As; (50-Ampere) | 1 |
266-4295 Circuit Breaker Gp -50 Ampere
| 26***63 | Link; (Breaker) | 3 |
| 26***06 | Circuit Breaker As; (50-Ampere) | 1 |
| 26***24 | Terminal; (Breaker) | 1 |
266-4300 Circuit Breaker Gp -125-Ampere
| 26***94 | Link; (Breaker) | 3 |
| 26***10 | Circuit Breaker As; (125-Ampere) | 1 |
| 26***24 | Terminal; (Breaker) | 1 |
266-4302 Circuit Breaker Gp -250-Ampere
| 26***01 | Link | 3 |
| 26***12 | Circuit Breaker As; (250-Ampere) | 1 |
| 26***24 | Terminal; (Breaker) | 1 |
266-4308 Circuit Breaker Gp -150 Ampere
| 26***11 | Circuit Breaker As; (150-Ampere) | 1 |
| 26***24 | Terminal; (Breaker) | 1 |
| 26***08 | Circuit Breaker Group; -150-Ampere | 1 |
266-3457 Circuit Breaker Gp -125-Ampere
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 16***16 | Insulator | 2 |
| 20***98 | Insert-Threaded; (M5x0.8-Thd)(Threated M6) | 6 |
266-4299 Circuit Breaker Gp -100 Ampere
| 26***64 | Link; (Breaker) | 3 |
| 26***09 | Circuit Breaker As; (100-Ampere) | 1 |
| 26***24 | Terminal; (Breaker) | 1 |
266-4304 Circuit Breaker Gp -50-Ampere
| 26***06 | Circuit Breaker As; (50-Ampere) | 1 |
| 26***24 | Terminal; (Breaker) | 1 |
| 26***04 | Circuit Breaker Group; -50-Ampere | 1 |
266-3245 Circuit Breaker Gp
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 16***16 | Insulator | 2 |
| 26***96 | Bar; (Neutral Copper) | 1 |
266-4292 Circuit Breaker Gp -40-Ampere
| 26***63 | Link; (Breaker) | 3 |
| 26***05 | Circuit Breaker As; (40-Ampere) | 1 |
| 26***24 | Terminal; (Breaker) | 1 |
266-3246 Circuit Breaker Gp
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 16***16 | Insulator | 2 |
| 26***04 | Circuit Breaker As; (90-Ampere) | 1 |
266-4297 Circuit Breaker Gp -60 Ampere
| 26***64 | Link; (Breaker) | 3 |
| 26***07 | Circuit Breaker As; (60-Ampere) | 1 |
| 26***24 | Terminal; (Breaker) | 1 |
266-3247 Circuit Breaker Gp
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 16***16 | Insulator | 2 |
| 26***96 | Bar; (Neutral Copper) | 1 |
266-4306 Circuit Breaker Gp -80-Ampere
| 26***08 | Circuit Breaker As; (80-Ampere) | 1 |
| 26***24 | Terminal; (Breaker) | 1 |
| 26***06 | Circuit Breaker Group; -80-Ampere | 1 |
266-3458 Circuit Breaker Gp -150-Ampere
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 20***98 | Insert-Threaded; (M5x0.8-Thd)(Threated M6) | 6 |
| 26***11 | Circuit Breaker As; (150-Ampere) | 1 |
273-1635 Circuit Breaker Gp -125-Ampere
| 26***10 | Circuit Breaker As; (125-Ampere) | 1 |
| 26***24 | Terminal; (Breaker) | 1 |
| 27***35 | Circuit Breaker Group; -125-Ampere | 1 |
286-5502 Conduit Gp-Electrical
| 21***64 | Tee; (Conduit) | 1 |
| 26***80 | Connector-Electrical | 1 |
| 26***04 | Sleeve | 1 |
286-5504 Conduit Gp-Electrical
| 21***64 | Tee; (Conduit) | 1 |
| 26***80 | Connector-Electrical | 1 |
| 26***04 | Sleeve | 1 |
286-5503 Conduit Gp-Electrical
| 26***80 | Connector-Electrical | 1 |
| 26***04 | Sleeve | 1 |
| 28***03 | Conduit Group-Electrical | 1 |
262-6951 Connection Gp-Electrical
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 6 |
| 26***92 | Block-Terminal | 1 |
| 26***51 | Connection Group-Electrical | 1 |
262-6949 Connection Gp-Electrical
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 8 |
| 26***92 | Block-Terminal | 1 |
| 26***93 | Link; (Terminal) | 1 |
262-6952 Connection Gp-Electrical
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 6 |
| 26***92 | Block-Terminal | 1 |
| 26***93 | Link; (Terminal) | 1 |
262-6950 Connection Gp-Electrical
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 6 |
| 26***92 | Block-Terminal | 1 |
| 26***93 | Link; (Terminal) | 2 |
297-5403 Connection Gp-Electrical
| 29***02 | Kit-Connection; (Alternator) | 1 |
| 29***03 | Connection Group-Electrical | 1 |
227-2842 Contactor As
| 22***42 | Contactor As | 1 |
267-9879 Contactor Gp -220-Volt
| 26***22 | Contactor | 1 |
| 26***79 | Contactor Group; -220-Volt | 1 |
267-9878 Contactor Gp -110-Volt
| 26***52 | Contactor | 1 |
| 26***78 | Contactor Group; -110-Volt | 1 |
274-6371 Control Gp-Communication -Common Control-Panel
| 09***26 | Lockwasher-Tooth; (M4 Id) | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 26***84 | Nut; (M4x0.7-Thd) | 4 |
266-8857 Control Gp-Relay -Over Voltage
| 14***90 | Relay; (Over Voltage) | 1 |
| 26***37 | Harness As-Wiring; (Control) | 1 |
| 26***57 | Control Group-Relay; -Over Voltage | 1 |
284-8837 Control Gp-Relay -12-Volt
| 20***30 | Relay; (12-Volt Dc) | 1 |
| 28***37 | Control Group-Relay; -12-Volt | 1 |
281-6995 Cover Gp-Circuit Breaker
| 20***74 | Bolt; (M6x1x12-mm) | 5 |
| 27***36 | Plate; (Top) | 1 |
| 28***95 | Cover Group-Circuit Breaker | 1 |
281-6993 Cover Gp-Circuit Breaker
| 26***71 | Bolt; (M6x1x12-mm) | 5 |
| 28***93 | Cover Group-Circuit Breaker | 1 |
| 28***94 | Plate; (Top) | 1 |
281-6992 Cover Gp-Circuit Breaker
| 26***71 | Bolt; (M6x1x12-mm) | 4 |
| 26***64 | Plate; (Top) | 1 |
| 28***92 | Cover Group-Circuit Breaker | 1 |
266-2946 Cover Gp-Circuit Breaker -Dual Breaker-Panel
| 26***46 | Cover Group-Circuit Breaker; -Dual Breaker-Panel | 1 |
| 26***59 | Plate-Cover | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 6 |
281-6996 Cover Gp-Circuit Breaker
| 20***74 | Bolt; (M6x1x12-mm) | 5 |
| 28***96 | Cover Group-Circuit Breaker | 1 |
| 28***97 | Plate; (Top) | 1 |
266-2942 Cover Gp-Circuit Breaker
| 26***42 | Cover Group-Circuit Breaker | 1 |
| 26***56 | Cover-Front | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 6 |
268-0861 Fastener Gp-Ground Stud
| 21***89 | Washer-Spring; (8.5x15.5-mm) | 2 |
| 26***61 | Fastener Group-Ground Stud | 1 |
| 6V***89 | Nut-Plt; (M8 X 1.25) | 2 |
269-3873 Fastener Gp-Junction Box
| 26***73 | Fastener Group-Junction Box | 1 |
| 6V***89 | Nut-Plt; (M8 X 1.25) | 1 |
| 7H***37 | Lockwasher, External Tooth (5/16); W/O Freespool Qty Is 0 | 1 |
288-8608 Fastener Gp-Wiring Harness
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 28***08 | Fastener Group-Wiring Harness | 1 |
268-0864 Fastener Gp-Wiring Harness
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 26***64 | Fastener Group-Wiring Harness | 1 |
| 28***88 | Clip-Cable | 1 |
266-8834 Fuse Gp
| 14***71 | Fuse; (2-Ampere)(European Sourced) | 2 |
| 15***10 | Fuse; (16-Ampere)(European Sourced) | 1 |
| 23***55 | Fuse; (4-Ampere)(European Sourced) | 1 |
285-4988 Fuse Gp
| 14***71 | Fuse; (2-Ampere)(European Sourced) | 1 |
| 28***88 | Fuse Group | 1 |
285-4979 Fuse Gp
| 16***02 | Holder-Fuse | 3 |
| 16***72 | Fuse; (6-Ampere) | 3 |
| 20***59 | Rail; (4.4-Dm Each) | 1 |
285-4989 Fuse Gp
| 16***70 | Fuse; (2-Ampere) | 1 |
| 28***89 | Fuse Group | 1 |
266-8847 Fuse Gp
| 12***52 | Fuse; (10-Ampere) | 1 |
| 16***70 | Fuse; (2-Ampere) | 3 |
| 26***47 | Fuse Group | 1 |
266-8844 Fuse Gp
| 16***70 | Fuse; (2-Ampere) | 2 |
| 16***71 | Fuse; (4-Ampere) | 1 |
| 26***44 | Fuse Group | 1 |
266-8836 Fuse Gp
| 14***71 | Fuse; (2-Ampere)(European Sourced) | 3 |
| 14***80 | Fuse; (10-Ampere)(European Sourced) | 1 |
| 26***36 | Fuse Group | 1 |
285-4987 Fuse Gp
| 16***72 | Fuse; (6-Ampere) | 1 |
| 28***87 | Fuse Group | 1 |
269-3868 Fuse Gp
| 26***19 | Holder-Fuse | 3 |
| 26***68 | Fuse Group | 1 |
| 26***74 | Fuse; (6.3-Ampere) | 3 |
266-8843 Fuse Gp
| 12***52 | Fuse; (10-Ampere) | 1 |
| 16***70 | Fuse; (2-Ampere) | 2 |
| 16***71 | Fuse; (4-Ampere) | 1 |
266-8833 Fuse Gp
| 14***71 | Fuse; (2-Ampere)(European Sourced) | 2 |
| 14***80 | Fuse; (10-Ampere)(European Sourced) | 1 |
| 23***55 | Fuse; (4-Ampere)(European Sourced) | 1 |
285-4986 Fuse Gp
| 14***72 | Fuse; (6-Ampere)(European Sourced) | 1 |
| 28***86 | Fuse Group | 1 |
275-2427 Glow Plug Gp
| 10***16 | Bolt; (M6x16-mm) | 1 |
| 23***62 | Glow Plug; (12-Volt) | 3 |
| 27***27 | Glow Plug Group | 1 |
304-8543 Harness As
| 30***43 | Harness As | 1 |
266-2146 Harness As
| 26***46 | Harness As | 1 |
266-2147 Harness As
| 26***47 | Harness As | 1 |
315-0299 Harness As-Engine
| 31***99 | Harness As-Engine | 1 |
266-0584 Harness As-Lighting
| 26***84 | Harness As-Lighting | 1 |
| 8L***13 | Strap-Cable(Tie 5.50" Long) | 13 |
266-2143 Harness As-Power
| 26***43 | Harness As-Power | 1 |
266-2142 Harness As-Power
| 26***42 | Harness As-Power | 1 |
266-2138 Harness As-Power
| 26***38 | Harness As-Power | 1 |
266-2139 Harness As-Power
| 26***39 | Harness As-Power | 1 |
313-6855 Harness As-Sensor
| 2L***77 | Terminal; (14-Ga To 16-Ga, 1/4-In Screw)(14-16 Gage, 6.4mm Screw) | 7 |
| 31***55 | Harness As-Sensor | 1 |
| 8L***13 | Strap-Cable(Tie 5.50" Long) | 8 |
264-8812 Harness As-Wiring -Jumper
| 26***12 | Harness As-Wiring; -Jumper | 1 |
277-5643 Harness As-Wiring
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 6 |
| 27***43 | Harness As-Wiring | 1 |
287-8087 Harness As-Wiring
| 28***87 | Harness As-Wiring | 1 |
| 2L***77 | Terminal; (14-Ga To 16-Ga, 1/4-In Screw)(14-16 Gage, 6.4mm Screw) | 1 |
| 6T***80 | Terminal | 1 |
287-8086 Harness As-Wiring
| 26***00 | Clamp As | 1 |
| 26***80 | Connector-Electrical | 1 |
| 26***19 | Plug As-Connector | 1 |
271-0361 Harness As-Wiring -Canopy, Emergency Stop
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 14***79 | Gasket | 1 |
294-4836 Harness As-Wiring -Voltage Adjustment
| 29***36 | Harness As-Wiring; -Voltage Adjustment | 1 |
268-3059 Heater Gp-Battery -240-Volt
| 09***61 | Strap; (Cable) | 2 |
| 21***65 | Tee | 1 |
| 26***79 | Element; (240-Volt)(Battery Heater) | 1 |
270-7785 Heater Gp-Battery
| 09***26 | Lockwasher-Tooth; (M4 Id) | 8 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
| 21***18 | Heater As-Space | 2 |
268-2611 Heater Gp-Battery
| 09***26 | Lockwasher-Tooth; (M4 Id) | 8 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
| 21***17 | Heater As; (110-Volt) | 2 |
268-3060 Heater Gp-Battery -120-Volt
| 09***61 | Strap; (Cable) | 2 |
| 21***65 | Tee | 1 |
| 26***78 | Element; (120-Volt)(Battery Heater) | 1 |
268-3062 Heater Gp-Coolant & Engine Oil -240-Volt
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 26***49 | Adapter-Pipe | 1 |
| 26***64 | Bracket-Mounting | 1 |
268-3063 Heater Gp-Coolant & Engine Oil -120-Volt
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 26***49 | Adapter-Pipe | 1 |
| 26***64 | Bracket-Mounting | 1 |
265-4869 Heater Gp-Engine Oil -120-Volt
| 09***61 | Strap; (Cable) | 2 |
| 21***65 | Tee | 1 |
| 26***74 | Heater-Electric | 1 |
265-4751 Heater Gp-Engine Oil
| 09***61 | Strap; (Cable) | 2 |
| 21***64 | Tee; (Conduit) | 1 |
| 26***75 | Element As-Engine Oil Heater | 1 |
268-1446 Mounting Gp -Socket
| 09***26 | Lockwasher-Tooth; (M4 Id) | 17 |
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 17 |
| 19***26 | Insert-Threaded; (M4x0.7-Thd)(M4x0.7 Thd) | 9 |
287-6005 Mounting Gp-Battery Charger
| 28***04 | Bracket As | 1 |
| 28***05 | Mounting Group-Battery Charger | 1 |
| 3E***04 | Insert-Threaded; (M6x1-Thd)(M6x1-6 Thd) | 4 |
268-6180 Mounting Gp-Battery Charger
| 26***61 | Bracket As-Mounting | 1 |
| 26***80 | Mounting Group-Battery Charger | 1 |
| 3E***04 | Insert-Threaded; (M6x1-Thd)(M6x1-6 Thd) | 12 |
268-6181 Mounting Gp-Battery Charger
| 26***62 | Bracket As-Mount | 1 |
| 26***81 | Mounting Group-Battery Charger | 1 |
| 3E***04 | Insert-Threaded; (M6x1-Thd)(M6x1-6 Thd) | 12 |
270-6794 Mounting Gp-Battery Charger
| 27***94 | Mounting Group-Battery Charger | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 4 |
| 9X***56 | Washer; (6.6x12x2-mm Thk) | 4 |
281-6999 Mounting Gp-Circuit Breaker
| 14***99 | Insulator | 2 |
| 28***99 | Mounting Group-Circuit Breaker | 1 |
| 28***00 | Bracket As | 1 |
281-6989 Mounting Gp-Circuit Breaker
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 14 |
| 26***71 | Bolt; (M6x1x12-mm) | 4 |
| 26***78 | Bolt; (M8x1.25x30-mm)(Marked Y) | 1 |
278-0938 Mounting Gp-Circuit Breaker
| 12***46 | Lockwasher | 3 |
| 15***54 | Bolt; (M10x1.5x40-mm) | 3 |
| 23***43 | Washer; (10.5x21x1.25-mm Thk) | 6 |
274-3858 Mounting Gp-Control
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 27***56 | Strip Group-Terminal | 1 |
| 27***58 | Mounting Group-Control | 1 |
274-3859 Mounting Gp-Control
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 27***57 | Strip Group-Terminal | 1 |
| 27***59 | Mounting Group-Control | 1 |
304-7711 Mounting Gp-Panel
| 12***46 | Lockwasher | 1 |
| 25***58 | Bracket | 1 |
| 30***59 | Panel As | 1 |
266-2726 Mounting Gp-Panel
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 6 |
| 20***74 | Bolt; (M6x1x12-mm) | 8 |
| 26***78 | Bolt; (M8x1.25x30-mm)(Marked Y) | 1 |
267-9634 Mounting Gp-Panel
| 14***38 | Pin | 4 |
| 14***47 | Collar | 4 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 2 |
274-6372 Mounting Gp-Panel
| 14***14 | Screw-Self-Tapping; (No 8x0.5-In) | 4 |
| 27***69 | Plate-Cover | 1 |
| 27***72 | Mounting Group-Panel | 1 |
274-8984 Mounting Gp-Panel
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 6 |
| 20***74 | Bolt; (M6x1x12-mm) | 8 |
| 26***78 | Bolt; (M8x1.25x30-mm)(Marked Y) | 1 |
268-1449 Mounting Gp-Panel
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 18 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 18 |
| 26***08 | Bracket As-Hinge | 1 |
268-3104 Mounting Gp-Panel
| 26***85 | Washer; (9x25x1.6-mm Thk) | 6 |
| 26***94 | Lockwasher | 6 |
| 26***04 | Mounting Group-Panel | 1 |
266-8854 Mounting Gp-Terminal Strip
| 26***71 | Bolt; (M6x1x12-mm) | 4 |
| 26***54 | Mounting Group-Terminal Strip | 1 |
| 29***40 | Panel Group-Electrical | 1 |
268-1442 Plug Gp-Connector
| 09***26 | Lockwasher-Tooth; (M4 Id) | 4 |
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 4 |
| 19***26 | Insert-Threaded; (M4x0.7-Thd)(M4x0.7 Thd) | 4 |
285-4969 Relay Gp -Overcurrent
| 28***99 | Relay; (Overcurrent) | 1 |
| 28***69 | Relay Group; -Overcurrent | 1 |
258-5304 Relay Gp -12-Volt
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 12***18 | Fuse; (25-Ampere) | 1 |
| 25***04 | Relay Group; -12-Volt | 1 |
285-4970 Relay Gp -Overcurrent
| 23***25 | Link; (Terminal) | 2 |
| 28***00 | Relay; (Overcurrent) | 1 |
| 28***70 | Relay Group; -Overcurrent | 1 |
258-5322 Relay Gp -12-Volt
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 12***18 | Fuse; (25-Ampere) | 1 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 1 |
269-3871 Seal Gp-Connector
| 26***71 | Grommet | 1 |
| 26***71 | Seal Group-Connector | 1 |
269-3872 Seal Gp-Connector
| 26***71 | Grommet | 3 |
| 26***72 | Seal Group-Connector | 1 |
277-0041 Sender Gp
| 26***71 | Sender; (Oil Pressure Switch) | 1 |
| 26***03 | Sender; (Water Temperature Switch) | 1 |
| 27***41 | Sender Group | 1 |
267-9603 Sender Gp -Temperature, Pressure
| 26***71 | Sender; (Oil Pressure Switch) | 1 |
| 26***03 | Sender; (Water Temperature Switch) | 1 |
| 26***03 | Sender Group; -Temperature, Pressure | 1 |
267-9599 Sensor Gp-Coolant Level
| 26***99 | Sensor Group-Coolant Level | 1 |
| 35***59 | Sensor Group-Liquid Level; (Low Level) | 1 |
| 8T***14 | Sealant-Silicone; (Clear) | 0 |
296-5034 Sensor Gp-Temperature
| 29***14 | Sensor-Temperature; (Oil) | 1 |
| 29***34 | Sensor Group-Temperature | 1 |
328-0675 Starting Motor Gp-Electric
| 31***39 | Starting Motor Group-Electric | 1 |
| 32***75 | Starting Motor Group-Electric | 1 |
| 6I***94 | Nut; (M10x1.15-Thd) | 3 |
289-1068 Starting Motor Gp-Electric
| 22***48 | Starting Motor Group-Electric; (12-Volt) | 1 |
| 28***68 | Starting Motor Group-Electric | 1 |
| 6I***94 | Nut; (M10x1.15-Thd) | 3 |
266-3201 Strip Gp-Terminal
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 2 |
| 14***89 | Block-Terminal | 2 |
| 20***59 | Rail; (4.4-Dm Each) | 0 |
285-4985 Strip Gp-Terminal
| 14***89 | Block-Terminal | 1 |
| 23***09 | Terminal; (3-Contact, 10-Ga To 22-Ga) | 2 |
| 23***23 | Terminal; (Ground) | 1 |
304-8754 Strip Gp-Terminal
| 14***89 | Block-Terminal | 2 |
| 20***59 | Rail; (4.4-Dm Each) | 0 |
| 30***11 | Block-Terminal; (800-Volt, 24-Ampere) | 7 |
284-8844 Strip Gp-Terminal
| 14***90 | Diode As | 1 |
| 14***89 | Block-Terminal | 1 |
| 16***02 | Holder-Fuse | 1 |
285-4981 Strip Gp-Terminal
| 14***89 | Block-Terminal | 1 |
| 20***59 | Rail; (4.4-Dm Each) | 0 |
| 23***09 | Terminal; (3-Contact, 10-Ga To 22-Ga) | 4 |
266-8831 Strip Gp-Terminal
| 14***90 | Diode As | 1 |
| 14***89 | Block-Terminal | 2 |
| 16***02 | Holder-Fuse | 1 |
274-3856 Strip Gp-Terminal
| 14***90 | Diode As | 1 |
| 14***89 | Block-Terminal | 1 |
| 16***02 | Holder-Fuse | 4 |
285-4973 Strip Gp-Terminal
| 14***90 | Diode As | 1 |
| 14***89 | Block-Terminal | 1 |
| 16***02 | Holder-Fuse | 1 |
285-4971 Strip Gp-Terminal
| 14***90 | Diode As | 1 |
| 14***89 | Block-Terminal | 1 |
| 16***02 | Holder-Fuse | 1 |
284-8843 Strip Gp-Terminal
| 14***70 | Holder-Fuse | 1 |
| 14***90 | Diode As | 1 |
| 14***89 | Block-Terminal | 1 |
274-3857 Strip Gp-Terminal
| 14***90 | Diode As | 1 |
| 14***89 | Block-Terminal | 1 |
| 16***02 | Holder-Fuse | 4 |
284-8845 Strip Gp-Terminal
| 14***90 | Diode As | 1 |
| 14***89 | Block-Terminal | 1 |
| 16***02 | Holder-Fuse | 1 |
265-4888 Switch Gp-Liquid Level -Fuel
| 26***88 | Switch Group-Liquid Level; -Fuel | 1 |
| 26***26 | Switch As-Liquid Level; (Fuel) | 1 |
261-7822 Switch Gp-Push Button -Emergency Stop
| 26***03 | Plate | 1 |
| 26***22 | Switch Group-Push Button; -Emergency Stop-Stop | 1 |
| 26***23 | Key; (Emergency Stop) | 2 |
301-5669 Switch Gp-Rotary -Fuel Priming
| 26***03 | Plate | 1 |
| 30***67 | Switch-Rotary; (Fuel Priming) | 1 |
| 30***69 | Switch Group-Rotary; -Fuel Priming | 1 |
269-0453 Transformer As-Current -100-Ampere
| 09***61 | Strap; (Cable) | 6 |
| 21***71 | Transformer | 3 |
| 26***53 | Transformer As-Current; -100-Ampere | 1 |
269-0460 Transformer Gp-Current -100-Ampere
| 09***61 | Strap; (Cable) | 2 |
| 21***71 | Transformer | 1 |
| 26***60 | Transformer Group-Current; -100-Ampere | 1 |
269-0454 Transformer Gp-Current -150-Ampere
| 09***61 | Strap; (Cable) | 6 |
| 26***82 | Transformer; (Ratio 150:5) | 3 |
| 26***54 | Transformer Group-Current; -150-Ampere | 1 |
269-0461 Transformer Gp-Current -150-Ampere
| 09***61 | Strap; (Cable) | 2 |
| 26***82 | Transformer; (Ratio 150:5) | 1 |
| 26***61 | Transformer Group-Current; -150-Ampere | 1 |
274-8965 Wire As-Alternator
| 03***05 | Terminal-Cable; (00-Ga, 5/16-In Screw) | 2 |
| 21***90 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 8 |
| 26***80 | Connector-Electrical | 2 |
269-8063 Wiring Gp-Electronic Control
| 1S***93 | Strap; (Cable) (0.62in Dia) | 8 |
| 26***00 | Clamp As | 1 |
| 26***19 | Plug As-Connector | 1 |
300-7034 Wiring Gp-Engine
| 11***91 | Fuse; (15-Ampere) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 10 |
| 21***66 | Tee; (9-9-9) | 1 |
272-9639 Wiring Gp-Engine
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 6 |
| 09***61 | Strap; (Cable) | 6 |
| 22***57 | Sensor As-Speed; (Magnetic) | 2 |
272-9637 Wiring Gp-Generator
| 09***61 | Strap; (Cable) | 14 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***85 | Plug As-Connector; (1-Pin) | 1 |
269-8065 Wiring Gp-Panel -Ac Sensing, Interconnect
| 1S***93 | Strap; (Cable) (0.62in Dia) | 6 |
| 26***80 | Connector-Electrical | 2 |
| 26***42 | Harness As-Wiring; (Ac Sensing, Interconnect) | 1 |
269-8064 Wiring Gp-Panel -Ac Sensing Loom
| 1S***93 | Strap; (Cable) (0.62in Dia) | 8 |
| 26***00 | Clamp As | 1 |
| 26***80 | Connector-Electrical | 1 |
272-9638 Wiring Gp-Sensor
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 6 |
| 09***61 | Strap; (Cable) | 20 |
| 09***92 | Washer, Tooth | 3 |
Enclosures, Guards And Bases
282-6324 Baffle Gp-Air Flow
| 13***40 | Locknut; (M8x1.25-Thd) | 3 |
| 28***24 | Baffle Group-Air Flow | 1 |
| 29***51 | Plate-Baffle | 1 |
263-0385 Base Gp-Engine & Generator
| 25***90 | Base As-Engine & Generator | 1 |
| 25***58 | Bracket | 1 |
| 26***85 | Base Group-Engine & Generator | 1 |
266-5730 Base Gp-Engine & Generator
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 4 |
| 25***83 | Base As | 1 |
| 26***30 | Base Group-Engine & Generator | 1 |
263-0384 Base Gp-Engine & Generator
| 25***82 | Base As-Fuel Tank | 1 |
| 25***58 | Bracket | 1 |
| 26***84 | Base Group-Engine & Generator | 1 |
258-5386 Base Gp-Engine & Generator
| 25***86 | Base Group-Engine & Generator | 1 |
261-2537 Door As -Enclosure
| 12***78 | Locknut; (M6x1-Thd) | 6 |
| 14***94 | Rivet | 6 |
| 21***50 | Stay | 1 |
261-2542 Door As -Enclosure
| 12***78 | Locknut; (M6x1-Thd) | 6 |
| 14***94 | Rivet | 6 |
| 21***50 | Stay | 1 |
263-0214 Door As-Rear
| 12***78 | Locknut; (M6x1-Thd) | 10 |
| 14***94 | Rivet | 2 |
| 26***55 | Seal | 1 |
261-2547 Door As-Rear -Enclosure
| 14***94 | Rivet | 2 |
| 23***71 | Seal; (16.5-Dm) | 0 |
| 23***72 | Seal; (16.5-Dm) | 0 |
263-0208 Door As-Rear
| 12***78 | Locknut; (M6x1-Thd) | 6 |
| 14***94 | Rivet | 6 |
| 21***50 | Stay | 1 |
263-0204 Door As-Rear
| 12***78 | Locknut; (M6x1-Thd) | 6 |
| 14***94 | Rivet | 6 |
| 21***50 | Stay | 1 |
301-8185 Enclosure As
| 06***07 | Cap-Rain | 1 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 8 |
| 12***78 | Locknut; (M6x1-Thd) | 8 |
268-4953 Enclosure Gp-Generator
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 14***01 | Screw; (M10x1.5x20-mm) | 4 |
254-3602 Enclosure Gp-Generator
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 11***81 | Adhesive; (All Joints To Be Sealed) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 4 |
268-4967 Enclosure Gp-Generator
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 14***01 | Screw; (M10x1.5x20-mm) | 4 |
266-5751 Enclosure Gp-Generator
| 12***80 | Locknut; (M12x1.75-Thd) | 4 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 14***99 | Lockwasher | 3 |
266-5720 Enclosure Gp-Generator
| 25***02 | Enclosure Group-Generator | 1 |
| 25***26 | Plate | 1 |
| 26***93 | Washer; (10.5x21x2-mm Thk) | 6 |
266-5781 Enclosure Gp-Generator
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 13***40 | Locknut; (M8x1.25-Thd) | 8 |
257-6014 Enclosure Gp-Generator
| 14***38 | Pin | 21 |
| 14***47 | Collar | 21 |
| 25***33 | Bolt-Flange Head; (M6x1x16-mm, Self Locking) | 8 |
266-5778 Enclosure Gp-Generator
| 25***26 | Plate | 1 |
| 26***93 | Washer; (10.5x21x2-mm Thk) | 6 |
| 26***06 | Bolt-Socket Head; (M10x1.5x20-mm) | 3 |
268-4937 Enclosure Gp-Generator
| 26***37 | Enclosure Group-Generator | 1 |
| 26***39 | Enclosure Group-Generator | 1 |
| 26***46 | Enclosure Group-Generator | 1 |
266-5776 Enclosure Gp-Generator
| 11***81 | Adhesive; (All Joints To Be Sealed) | 0 |
| 13***40 | Locknut; (M8x1.25-Thd) | 24 |
| 16***81 | Hinge As | 1 |
271-8294 Enclosure Gp-Generator
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 11***81 | Adhesive; (All Joints To Be Sealed) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 4 |
263-0277 Enclosure Gp-Generator
| 14***83 | Ring-Retaining | 8 |
| 20***16 | Handle; (Pull) | 1 |
| 20***48 | Screw-Flat Head; (M6x1x25-mm) | 4 |
268-4969 Enclosure Gp-Generator
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 11***81 | Adhesive; (All Joints To Be Sealed) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 4 |
263-0194 Enclosure Gp-Generator
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 12 |
| 11***81 | Adhesive; (All Joints To Be Sealed) | 0 |
| 12***78 | Locknut; (M6x1-Thd) | 12 |
266-5782 Enclosure Gp-Generator
| 26***81 | Enclosure Group-Generator | 1 |
| 26***82 | Enclosure Group-Generator | 1 |
266-5784 Enclosure Gp-Generator
| 12***80 | Locknut; (M12x1.75-Thd) | 4 |
| 13***40 | Locknut; (M8x1.25-Thd) | 8 |
| 14***99 | Lockwasher | 3 |
268-4968 Enclosure Gp-Generator
| 26***46 | Enclosure Group-Generator | 1 |
| 26***68 | Enclosure Group-Generator | 1 |
| 26***69 | Enclosure Group-Generator | 1 |
268-4946 Enclosure Gp-Generator
| 14***38 | Pin | 21 |
| 14***47 | Collar | 21 |
| 25***29 | Panel-Cover | 1 |
258-5202 Enclosure Gp-Generator
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 6 |
| 11***81 | Adhesive; (All Joints To Be Sealed) | 0 |
| 12***78 | Locknut; (M6x1-Thd) | 6 |
271-8296 Enclosure Gp-Generator
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 14***01 | Screw; (M10x1.5x20-mm) | 4 |
| 15***54 | Bolt; (M10x1.5x40-mm) | 2 |
271-8295 Enclosure Gp-Generator
| 25***14 | Enclosure Group-Generator | 1 |
| 27***94 | Enclosure Group-Generator | 1 |
| 27***95 | Enclosure Group-Generator | 1 |
268-4939 Enclosure Gp-Generator
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 11***81 | Adhesive; (All Joints To Be Sealed) | 0 |
| 12***78 | Locknut; (M6x1-Thd) | 4 |
254-3641 Enclosure Gp-Genset
| 14***94 | Rivet | 16 |
| 14***56 | Washer | 3 |
| 25***41 | Enclosure Group-Genset | 1 |
301-8186 Enclosure Gp-Genset
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 26***54 | Cover; (Cable) | 1 |
| 29***11 | Enclosure Group-Genset | 1 |
301-8233 Enclosure Gp-Genset
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 26***54 | Cover; (Cable) | 1 |
| 30***85 | Enclosure As | 1 |
280-0838 Enclosure Gp-Genset
| 12***80 | Locknut; (M12x1.75-Thd) | 4 |
| 13***40 | Locknut; (M8x1.25-Thd) | 18 |
| 20***16 | Handle; (Pull) | 2 |
266-5783 Enclosure Gp-Genset
| 26***82 | Enclosure Group-Generator | 1 |
| 26***83 | Enclosure Group-Genset | 1 |
254-3642 Enclosure Gp-Genset
| 11***81 | Adhesive; (All Joints To Be Sealed) | 1 |
| 14***94 | Rivet | 19 |
| 25***42 | Enclosure Group-Genset | 1 |
266-5604 Enclosure Gp-Genset
| 25***02 | Enclosure Group-Generator | 1 |
| 25***53 | Insulation Group-Weather | 1 |
| 26***04 | Enclosure Group-Genset | 1 |
254-3654 Enclosure Gp-Genset
| 14***56 | Washer | 10 |
| 25***54 | Enclosure Group-Genset | 1 |
| 25***55 | Enclosure Group-Genset | 1 |
254-3640 Enclosure Gp-Genset
| 25***40 | Enclosure Group-Genset | 1 |
| 25***41 | Enclosure Group-Genset | 1 |
| 25***54 | Enclosure Group-Genset | 1 |
258-5380 Enclosure Gp-Genset
| 25***80 | Enclosure Group-Genset | 1 |
| 26***94 | Enclosure Group-Generator | 1 |
| 26***77 | Enclosure Group-Generator | 2 |
254-3655 Enclosure Gp-Genset
| 11***81 | Adhesive; (All Joints To Be Sealed) | 1 |
| 14***99 | Lockwasher | 4 |
| 14***01 | Screw; (M10x1.5x20-mm) | 4 |
295-2811 Enclosure Gp-Genset
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 8 |
| 12***78 | Locknut; (M6x1-Thd) | 8 |
| 13***40 | Locknut; (M8x1.25-Thd) | 8 |
263-0317 Guard Gp
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 4 |
| 26***17 | Guard Group | 1 |
| 26***77 | Plate As | 1 |
263-0316 Guard Gp
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 4 |
| 26***16 | Guard Group | 1 |
| 26***60 | Plate As | 1 |
263-0315 Guard Gp -Skid
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 4 |
| 26***15 | Guard Group; -Skid | 1 |
| 26***41 | Plate As | 1 |
266-5671 Guard Gp -Skid
| 25***33 | Bolt-Flange Head; (M6x1x16-mm, Self Locking) | 8 |
| 26***70 | Plate As; (Closing) | 1 |
| 26***71 | Guard Group; -Skid | 1 |
271-8212 Mounting Gp-Beam
| 25***83 | Beam; (Engine) | 1 |
| 27***12 | Mounting Group-Beam | 1 |
| 27***15 | Beam As | 1 |
271-8230 Mounting Gp-Generator Base -Engine Mount
| 26***51 | Adapter-Pipe; (Bulkhead) | 2 |
| 26***18 | Adapter | 2 |
| 26***01 | Plug | 2 |
271-8269 Panel As-Enclosure -Rear
| 14***94 | Rivet | 2 |
| 14***38 | Pin | 4 |
| 14***47 | Collar | 4 |
257-6005 Panel As-Enclosure
| 14***94 | Rivet | 4 |
| 14***12 | Bracket | 2 |
| 25***05 | Panel As-Enclosure | 1 |
257-6003 Panel As-Enclosure -Front
| 14***94 | Rivet | 2 |
| 14***38 | Pin | 4 |
| 14***47 | Collar | 4 |
268-1447 Panel Gp-Enclosure
| 09***92 | Washer, Tooth | 1 |
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 1 |
| 20***98 | Insert-Threaded; (M5x0.8-Thd)(Threated M6) | 1 |
268-4823 Panel Gp-Screen -Skid
| 26***55 | Plate As | 1 |
| 26***23 | Panel Group-Screen; -Skid | 1 |
| 3E***04 | Insert-Threaded; (M6x1-Thd)(M6x1-6 Thd) | 4 |
266-5721 Panel Gp-Screen -Rodent
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 8 |
| 21***08 | Bolt; (M8x1.25x25-mm) | 8 |
| 26***89 | Handle | 1 |
265-4853 Plate Gp-Stop
| 14***94 | Rivet | 4 |
| 26***53 | Plate Group-Stop | 1 |
| 26***41 | Plate-Mounting | 1 |
Engine Arrangement
291-0356 Engine Ar-Primary
| 27***27 | Cylinder Head Group | 1 |
| 27***35 | Crankshaft Group | 1 |
| 27***05 | Valve Mechanism Group | 1 |
266-4537 Engine Ar-Primary
| 26***37 | Engine Ar-Primary | 1 |
| 27***27 | Cylinder Head Group | 1 |
| 27***35 | Crankshaft Group | 1 |
292-7767 Engine Ar-Primary
| 27***27 | Cylinder Head Group | 1 |
| 27***35 | Crankshaft Group | 1 |
| 27***05 | Valve Mechanism Group | 1 |
266-4536 Engine Ar-Primary
| 26***36 | Engine Ar-Primary | 1 |
| 27***27 | Cylinder Head Group | 1 |
| 27***35 | Crankshaft Group | 1 |
293-3721 General Ar-Genset
| 26***37 | Engine Ar-Primary | 1 |
| 29***21 | General Ar-Genset | 1 |
293-3720 General Ar-Genset
| 26***36 | Engine Ar-Primary | 1 |
| 29***20 | General Ar-Genset | 1 |
292-7977 General Ar-Genset
| 29***67 | Engine Ar-Primary | 1 |
| 29***77 | General Ar-Genset | 1 |
293-0585 General Ar-Genset
| 29***56 | Engine Ar-Primary | 1 |
| 29***85 | General Ar-Genset | 1 |
284-0608 General Ar-Genset
| 26***37 | Engine Ar-Primary | 1 |
| 28***08 | General Ar-Genset | 1 |
291-1761 General Ar-Genset
| 29***56 | Engine Ar-Primary | 1 |
| 29***61 | General Ar-Genset | 1 |
284-0607 General Ar-Genset
| 26***36 | Engine Ar-Primary | 1 |
| 28***07 | Clamshell Bucket; 1m³; L=2100mm With Cutting Edge, General Ar-Genset | 1 |
293-1932 General Ar-Genset
| 29***67 | Engine Ar-Primary | 1 |
| 29***32 | General Ar-Genset | 1 |
Fuel System
266-5794 Base Gp-Fuel Tank
| 14***51 | Pipe-Fuel Filler | 1 |
| 14***53 | Cap As-Fuel Filler; (Fuel Tank) | 1 |
| 14***55 | Plug | 1 |
275-7529 Base Gp-Fuel Tank
| 14***58 | Plug | 1 |
| 14***51 | Pipe-Fuel Filler | 1 |
| 14***53 | Cap As-Fuel Filler; (Fuel Tank) | 1 |
268-2596 Base Gp-Fuel Tank
| 14***53 | Cap As-Fuel Filler; (Fuel Tank) | 1 |
| 14***55 | Plug | 1 |
| 14***56 | Plug | 2 |
277-6519 Base Gp-Fuel Tank
| 14***51 | Pipe-Fuel Filler | 1 |
| 14***53 | Cap As-Fuel Filler; (Fuel Tank) | 1 |
| 14***55 | Plug | 1 |
275-2390 Filter Gp-Fuel
| 1R***03 | Filter Element-Fuel; (Water Separator) | 1 |
| 20***57 | Seal; (Fuel Filter) | 1 |
| 21***08 | Fitting; (Quick Disconnect, Male) | 1 |
266-5793 Lines Gp-Fuel
| 00***86 | Connector-Hose (1/4-18nptf Thd) | 2 |
| 09***61 | Strap; (Cable) | 6 |
| 25***42 | Hose; (154.1-cm) | 0 |
266-5773 Lines Gp-Fuel
| 09***61 | Strap; (Cable) | 6 |
| 25***42 | Hose; (154.1-cm) | 0 |
| 26***90 | Clamp; (Hose) | 4 |
266-5795 Lines Gp-Fuel
| 00***86 | Connector-Hose (1/4-18nptf Thd) | 2 |
| 09***61 | Strap; (Cable) | 6 |
| 25***42 | Hose; (154.1-cm) | 0 |
266-5792 Lines Gp-Fuel
| 09***61 | Strap; (Cable) | 6 |
| 25***42 | Hose; (154.1-cm) | 0 |
| 26***90 | Clamp; (Hose) | 4 |
266-5799 Lines Gp-Fuel
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 15***30 | Adapter | 5 |
| 21***08 | Bolt; (M8x1.25x25-mm) | 4 |
275-1020 Pump Gp-Fuel Injection
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 14***18 | Washer | 1 |
| 16***26 | Switch-Temperature; (Engine Coolant Temperature) | 1 |
275-0883 Pump Gp-Fuel Injection
| 11***22 | Nut | 1 |
| 11***23 | Washer | 1 |
| 15***68 | Seal-O-Ring | 1 |
297-4084 Pump Gp-Fuel Injection
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 14***18 | Washer | 1 |
| 16***26 | Switch-Temperature; (Engine Coolant Temperature) | 1 |
274-4702 Pump Gp-Fuel Injection
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 14***18 | Washer | 1 |
| 14***00 | Bolt | 1 |
269-5529 Valve & Mtg Gp-Fuel
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 14***49 | Fitting | 1 |
| 26***10 | Valve; (Actuator) | 1 |
Generators
267-9619 Cable Gp-Generator Ground
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
266-2141 Connection Gp-Generator Leads
| 26***41 | Connection Group-Generator Leads | 1 |
277-3405 Connection Gp-Generator Leads
| 27***05 | Connection Group-Generator Leads | 1 |
277-3406 Connection Gp-Generator Leads
| 27***06 | Connection Group-Generator Leads | 1 |
266-2140 Connection Gp-Generator Leads
| 26***40 | Connection Group-Generator Leads | 1 |
266-2144 Connection Gp-Generator Leads
| 26***44 | Connection Group-Generator Leads | 1 |
277-3404 Connection Gp-Generator Leads
| 27***04 | Connection Group-Generator Leads | 1 |
277-3403 Connection Gp-Generator Leads
| 27***03 | Connection Group-Generator Leads | 1 |
277-3402 Connection Gp-Generator Leads
| 27***02 | Connection Group-Generator Leads | 1 |
277-3401 Connection Gp-Generator Leads
| 27***01 | Connection Group-Generator Leads | 1 |
266-2150 Connection Gp-Generator Leads
| 26***50 | Connection Group-Generator Leads | 1 |
268-1450 Connection Gp-Terminal Strip
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 12 |
| 17***49 | Bolt; (1/2-13x2.75-In) | 10 |
| 21***10 | Lockwasher; (13.5x20.5x1-mm Thk) | 20 |
268-7886 Exciter Gp -Permanent Magnet
| 26***93 | Kit-Exciter; (Permanent Magnet) | 1 |
| 26***86 | Exciter Group; -Permanent Magnet | 1 |
282-4989 Fastener Gp-Generator
| 28***89 | Fastener Group-Generator | 1 |
| 7K***36 | Rivet (Short); Rivet (Short) | 4 |
277-5666 Fastener Gp-Generator
| 14***94 | Rivet | 4 |
| 27***66 | Fastener Group-Generator; -Panel | 1 |
270-0075 Generator Ar
| 26***75 | Generator Group | 1 |
| 27***75 | Generator Ar | 1 |
265-2634 Generator Ar
| 26***66 | Generator Group | 1 |
| 26***34 | Generator Ar | 1 |
287-8066 Generator Ar
| 28***64 | Generator Group | 1 |
| 28***66 | Generator Ar | 1 |
265-2640 Generator Ar
| 26***74 | Generator Group | 1 |
| 26***40 | Generator Ar | 1 |
265-2644 Generator Ar
| 26***73 | Generator Group | 1 |
| 26***44 | Generator Ar | 1 |
321-5084 Generator Ar
| 30***73 | Generator Group | 1 |
| 32***84 | Generator Ar | 1 |
265-2645 Generator Ar
| 26***45 | Generator Ar | 1 |
| 27***56 | Generator Group | 1 |
265-2652 Generator Ar
| 26***67 | Generator Group | 1 |
| 26***52 | Generator Ar | 1 |
270-4823 Generator Ar
| 27***15 | Generator Group | 1 |
| 27***23 | Generator Ar | 1 |
321-5083 Generator Ar
| 30***72 | Generator Group | 1 |
| 32***83 | Generator Ar | 1 |
287-8062 Generator Ar
| 28***60 | Generator Group | 1 |
| 28***62 | Generator Ar | 1 |
321-5081 Generator Ar
| 30***08 | Generator Group | 1 |
| 32***81 | Generator Ar | 1 |
287-8061 Generator Ar
| 28***59 | Generator Group | 1 |
| 28***61 | Generator Ar | 1 |
287-8065 Generator Ar
| 28***63 | Generator Group | 1 |
| 28***65 | Generator Ar | 1 |
270-4824 Generator Ar
| 27***16 | Generator Group | 1 |
| 27***24 | Generator Ar | 1 |
265-2635 Generator Ar
| 26***68 | Generator Group | 1 |
| 26***35 | Generator Ar | 1 |
265-2653 Generator Ar
| 26***53 | Generator Ar | 1 |
| 27***01 | Generator Group | 1 |
265-2654 Generator Ar
| 26***54 | Generator Ar | 1 |
| 27***02 | Generator Group | 1 |
265-2637 Generator Ar
| 26***37 | Generator Ar | 1 |
| 26***41 | Generator Group | 1 |
347-4608 Generator Ar
| 34***08 | Generator Ar | 1 |
| 35***28 | Generator Group | 1 |
265-2664 Generator Ar
| 26***64 | Generator Ar | 1 |
| 26***24 | Generator Group | 1 |
265-2639 Generator Ar
| 26***72 | Generator Group | 1 |
| 26***39 | Generator Ar | 1 |
265-2647 Generator Ar
| 26***47 | Generator Ar | 1 |
| 27***57 | Generator Group | 1 |
265-2638 Generator Ar
| 26***70 | Generator Group | 1 |
| 26***38 | Generator Ar | 1 |
265-2636 Generator Ar
| 26***70 | Generator Group | 1 |
| 26***36 | Generator Ar | 1 |
265-2648 Generator Ar
| 26***69 | Generator Group | 1 |
| 26***48 | Generator Ar | 1 |
265-2643 Generator Ar
| 26***43 | Generator Ar | 1 |
| 27***55 | Generator Group | 1 |
265-2646 Generator Ar
| 26***71 | Generator Group | 1 |
| 26***46 | Generator Ar | 1 |
265-2663 Generator Ar
| 26***79 | Generator Group | 1 |
| 26***63 | Generator Ar | 1 |
321-5082 Generator Ar
| 30***09 | Generator Group | 1 |
| 32***82 | Generator Ar | 1 |
268-3595 Generator Ar
| 26***95 | Generator Ar | 1 |
| 26***96 | Generator Group | 1 |
270-2302 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***38 | Bracket | 1 |
265-2641 Generator Gp
| 26***34 | Stator | 1 |
| 26***35 | Rotor | 1 |
| 26***36 | Fan | 1 |
270-1255 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***39 | Screen; (Air Inlet) | 1 |
308-4773 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***39 | Screen; (Air Inlet) | 1 |
268-4224 Generator Gp
| 24***95 | Transformer | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***43 | Bolt Package; (Term-Box) | 20 |
269-8096 Generator Gp
| 26***37 | Terminal; (Ground) | 1 |
| 26***43 | Bolt Package; (Term-Box) | 20 |
| 26***55 | Bolt; (M10x1.5x30-mm)(Fixing Disc) | 6 |
270-3016 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***39 | Screen; (Air Inlet) | 1 |
287-8059 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***39 | Screen; (Air Inlet) | 1 |
262-7375 Generator Gp
| 26***37 | Terminal; (Ground) | 1 |
| 26***43 | Bolt Package; (Term-Box) | 20 |
| 26***55 | Bolt; (M10x1.5x30-mm)(Fixing Disc) | 6 |
262-7066 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***38 | Bracket | 1 |
262-7370 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***38 | Bracket | 1 |
270-3015 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***39 | Screen; (Air Inlet) | 1 |
262-7371 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***38 | Bracket | 1 |
270-1256 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***39 | Screen; (Air Inlet) | 1 |
270-1257 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***39 | Screen; (Air Inlet) | 1 |
262-7069 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***38 | Bracket | 1 |
287-8064 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***39 | Screen; (Air Inlet) | 1 |
262-7070 Generator Gp
| 26***34 | Stator | 1 |
| 26***35 | Rotor | 1 |
| 26***36 | Fan | 1 |
351-7928 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***39 | Screen; (Air Inlet) | 1 |
262-7068 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***38 | Bracket | 1 |
270-2301 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***38 | Bracket | 1 |
262-7374 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***38 | Bracket | 1 |
308-4308 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***39 | Screen; (Air Inlet) | 1 |
308-4309 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***39 | Screen; (Air Inlet) | 1 |
262-7372 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***38 | Bracket | 1 |
287-8063 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***39 | Screen; (Air Inlet) | 1 |
287-8060 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***39 | Screen; (Air Inlet) | 1 |
262-7067 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***38 | Bracket | 1 |
262-7379 Generator Gp
| 26***37 | Terminal; (Ground) | 1 |
| 26***43 | Bolt Package; (Term-Box) | 20 |
| 26***55 | Bolt; (M10x1.5x30-mm)(Fixing Disc) | 6 |
308-4772 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***39 | Screen; (Air Inlet) | 1 |
262-7373 Generator Gp
| 26***36 | Fan | 1 |
| 26***37 | Terminal; (Ground) | 1 |
| 26***38 | Bracket | 1 |
267-9586 Heater Gp-Space -Generator
| 09***26 | Lockwasher-Tooth; (M4 Id) | 8 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
| 21***18 | Heater As-Space | 2 |
267-9587 Heater Gp-Space -Generator
| 09***26 | Lockwasher-Tooth; (M4 Id) | 8 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
| 21***17 | Heater As; (110-Volt) | 2 |
263-0284 Insulation Gp-Weather
| 26***65 | Insulation As | 1 |
| 26***66 | Insulation As | 1 |
| 26***67 | Insulation As | 1 |
257-6053 Insulation Gp-Weather
| 25***10 | Insulation As | 1 |
| 25***53 | Insulation Group-Weather | 1 |
| 25***54 | Insulation As | 1 |
263-0391 Lifting Gp-Generator
| 09***61 | Strap; (Cable) | 3 |
| 12***80 | Locknut; (M12x1.75-Thd) | 6 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 4 |
263-0390 Lifting Gp-Generator
| 09***61 | Strap; (Cable) | 3 |
| 12***80 | Locknut; (M12x1.75-Thd) | 6 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 4 |
269-0449 Mounting Gp-Generator
| 26***49 | Mounting Group-Generator | 1 |
| 26***05 | Plate | 1 |
| 26***71 | Grommet | 4 |
269-0444 Mounting Gp-Generator
| 15***49 | Terminal-Blade | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 6 |
| 26***19 | Holder-Fuse | 3 |
269-0451 Mounting Gp-Generator
| 26***51 | Mounting Group-Generator | 1 |
| 26***01 | Plate | 1 |
269-0445 Mounting Gp-Generator
| 26***45 | Mounting Group-Generator | 1 |
| 26***00 | Plate | 1 |
| 26***71 | Grommet | 4 |
274-7231 Mounting Gp-Generator
| 15***49 | Terminal-Blade | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 6 |
| 26***19 | Holder-Fuse | 3 |
274-7227 Mounting Gp-Generator
| 15***49 | Terminal-Blade | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 6 |
| 26***19 | Holder-Fuse | 3 |
274-7226 Mounting Gp-Generator
| 15***49 | Terminal-Blade | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 6 |
| 26***19 | Holder-Fuse | 3 |
272-5311 Regulator Gp-Voltage
| 26***79 | Regulator As-Voltage; (Automatic) | 1 |
| 27***11 | Regulator Group-Voltage | 1 |
| 29***49 | Fuse; (8-Ampere) | 1 |
299-5884 Regulator Gp-Voltage
| 09***92 | Washer, Tooth | 4 |
| 09***91 | Screw-Machine; (M5x0.8x35-mm) | 4 |
| 26***92 | Nut; (M5x0.8-Thd) | 4 |
305-7259 Regulator Gp-Voltage
| 09***92 | Washer, Tooth | 8 |
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 8 |
| 20***98 | Insert-Threaded; (M5x0.8-Thd)(Threated M6) | 4 |
Lubrication System
266-5791 Drain Gp-Oil -Engine
| 15***04 | Adapter | 1 |
| 15***50 | Nut-Bulkhead; (1/2-In Bsp) | 1 |
| 17***52 | Washer; (Sealing) | 1 |
266-5756 Drain Gp-Oil -Engine
| 15***04 | Adapter | 1 |
| 15***50 | Nut-Bulkhead; (1/2-In Bsp) | 1 |
| 25***78 | Cap; (Pipe) | 1 |
268-4984 Drain Gp-Oil -Engine
| 25***41 | Pump; (Engine Oil Drain) | 1 |
| 25***42 | Adapter | 2 |
| 26***56 | Adapter | 1 |
274-4705 Filter Gp-Engine Oil
| 27***05 | Filter Group-Engine Oil | 1 |
| 7W***27 | Filter As-Engine Oil | 1 |
271-8217 Lines Gp-Lubrication
| 09***87 | Clamp, Hose | 4 |
| 12***87 | Hose; (59.1-In) | 0 |
| 12***90 | Hose-Hydraulic; (101.2-In) | 0 |
289-2483 Pump Gp-Gerotor
| 10***61 | Bolt; (M10x1.50x50-mm) | 5 |
| 23***41 | Pump As-Engine Oil | 1 |
| 28***83 | Pump Group-Gerotor | 1 |
Operator Station
269-9046 Alarm Gp -Coolant Temperature
| 26***87 | Sensor-Temperature; (Water, Coolant) | 1 |
| 26***46 | Alarm Group; -Coolant Temperature | 1 |
295-0278 Box Gp-Control Panel
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 26***79 | Grommet | 2 |
| 26***80 | Grommet | 6 |
295-0281 Box Gp-Control Panel -Oil Temperature
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 26***79 | Grommet | 2 |
| 26***80 | Grommet | 6 |
295-8224 Box Gp-Control Panel
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 29***15 | Box Group-Control Panel | 1 |
| 29***24 | Box Group-Control Panel | 1 |
295-0279 Box Gp-Control Panel
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 26***37 | Film-Identification; (Panel) | 1 |
| 26***79 | Grommet | 2 |
295-0280 Box Gp-Control Panel -Oil Temperature
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 26***79 | Grommet | 2 |
| 26***80 | Grommet | 6 |
294-7316 Box Gp-Control Panel
| 16***81 | Hinge As | 2 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 4 |
| 26***69 | Key; (Control Panel) | 1 |
294-7315 Box Gp-Control Panel
| 16***81 | Hinge As | 2 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 4 |
| 26***69 | Key; (Control Panel) | 1 |
294-7317 Box Gp-Control Panel -Oil Temperature
| 16***81 | Hinge As | 2 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 4 |
| 26***69 | Key; (Control Panel) | 1 |
267-1226 Control Gp-Generator Set -Annunciator
| 23***59 | Module Group-Alarm; -Annunciator | 1 |
| 26***26 | Control Group-Generator Set; -Annunciator | 1 |
266-1427 Control Gp-Generator Set -Emcp 3.1
| 09***26 | Lockwasher-Tooth; (M4 Id) | 6 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 6 |
| 23***42 | Screw; (M4x0.7x7-mm) | 1 |
261-5132 Control Gp-Generator Set -Emcp 3.2
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 6 |
| 23***42 | Screw; (M4x0.7x7-mm) | 1 |
300-7645 Control Gp-Generator Set -Emcp 3.1
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 8 |
| 16***77 | Screw-Button Head; (M6x1x28-mm) | 6 |
| 26***57 | Film-Certification; (Emcp 3) | 1 |
300-7646 Control Gp-Generator Set -Emcp 3.2
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 8 |
| 16***77 | Screw-Button Head; (M6x1x28-mm) | 6 |
| 26***57 | Film-Certification; (Emcp 3) | 1 |
269-3865 Cover Gp-Access -Panel
| 26***57 | Plate | 1 |
| 26***65 | Cover Group-Access; -Emulsion | 1 |
| 6V***73 | Screw; (Machine) (M5x0.8x12mm) | 4 |
281-6990 Cover Gp-Access -Circuit Breaker-Panel
| 26***71 | Bolt; (M6x1x12-mm) | 6 |
| 28***90 | Cover Group-Access; -Circuit Breaker-Panel | 1 |
| 28***91 | Plate-Cover | 1 |
266-3197 Cover Gp-Access -Dual Breaker-Panel
| 26***71 | Bolt; (M6x1x12-mm) | 4 |
| 26***09 | Plate; (Top) | 1 |
| 26***97 | Cover Group-Access; -Dual Breaker-Panel | 1 |
269-3864 Cover Gp-Access -Panel
| 20***98 | Insert-Threaded; (M5x0.8-Thd)(Threated M6) | 4 |
| 26***56 | Plate As | 1 |
| 26***64 | Cover Group-Access; -Panel | 1 |
266-3196 Cover Gp-Access -Dual Breaker Single-Panel
| 26***71 | Bolt; (M6x1x12-mm) | 4 |
| 26***06 | Plate; (Top) | 1 |
| 26***96 | Cover Group-Access; -Dual Breaker Single-Panel | 1 |
300-9618 Door As-Access
| 14***94 | Rivet | 4 |
| 14***12 | Bracket | 2 |
| 14***38 | Pin | 4 |
300-9617 Door As-Access
| 14***94 | Rivet | 4 |
| 14***12 | Bracket | 2 |
| 14***38 | Pin | 4 |
271-8286 Door As-Access -Enclosure
| 14***94 | Rivet | 4 |
| 14***12 | Bracket | 2 |
| 14***38 | Pin | 10 |
257-6011 Door As-Access -Enclosure
| 14***94 | Rivet | 4 |
| 14***12 | Bracket | 2 |
| 14***38 | Pin | 16 |
266-8851 Door Gp -Common Control
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 16***81 | Hinge As | 2 |
| 26***71 | Lock As | 1 |
266-8846 Door Gp -Common Control
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 16***81 | Hinge As | 2 |
| 26***71 | Lock As | 1 |
266-8845 Door Gp-Access -Control Panel
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 16***81 | Hinge As | 2 |
| 26***69 | Key; (Control Panel) | 1 |
284-8827 Door Gp-Access -Control Panel
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 16***81 | Hinge As | 2 |
| 26***69 | Key; (Control Panel) | 1 |
284-8826 Door Gp-Access -Control Panel
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 16***81 | Hinge As | 2 |
| 26***69 | Key; (Control Panel) | 1 |
268-1419 Door Gp-Access -Distribution Panel
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 8 |
| 09***92 | Washer, Tooth | 2 |
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 2 |
267-9609 Gauge Gp -Engine Oil
| 17***52 | Washer; (Sealing) | 1 |
| 26***96 | Washer-Copper; (14x22x2.4-mm Thk) | 1 |
| 26***72 | Sensor-Temperature; (Engine Oil) | 1 |
284-8835 Gauge Gp-Oil Temperature -Engine
| 23***53 | Terminal; (Spring) | 1 |
| 28***76 | Harness As-Wiring | 1 |
| 28***29 | Gauge Group-Oil Temperature; (24-Volt)(Engine) | 1 |
284-8834 Gauge Gp-Oil Temperature -Engine
| 23***53 | Terminal; (Spring) | 1 |
| 28***76 | Harness As-Wiring | 1 |
| 28***28 | Gauge Group-Oil Temperature; (12-Volt)(Engine) | 1 |
296-5033 Gauge Gp-Oil Temperature
| 29***15 | Adapter | 1 |
| 29***16 | Switch-Temperature; (Engine Oil) | 1 |
| 29***33 | Gauge Group-Oil Temperature | 1 |
236-1159 Module Gp-Alarm -Annunciator
| 16***77 | Screw-Button Head; (M6x1x28-mm) | 4 |
| 23***58 | Module Group-Alarm | 1 |
| 23***59 | Module Group-Alarm; -Annunciator | 1 |
272-7852 Mounting Gp-Control Panel
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 24 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 3 |
| 26***64 | Panel As; (Lh) | 1 |
268-1414 Panel As-Electrical
| 09***92 | Washer, Tooth | 4 |
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 4 |
| 26***92 | Nut; (M5x0.8-Thd) | 4 |
267-9645 Panel Gp-Control
| 21***89 | Washer-Spring; (8.5x15.5-mm) | 4 |
| 21***10 | Lockwasher; (13.5x20.5x1-mm Thk) | 4 |
| 26***94 | Lockwasher | 8 |
275-2020 Panel Gp-Control
| 12***46 | Lockwasher | 1 |
| 25***58 | Bracket | 1 |
| 26***78 | Bolt; (M8x1.25x30-mm)(Marked Y) | 2 |
267-9646 Panel Gp-Control
| 21***10 | Lockwasher; (13.5x20.5x1-mm Thk) | 4 |
| 26***78 | Bolt; (M8x1.25x30-mm)(Marked Y) | 2 |
| 26***31 | Panel As-Control | 1 |
272-7856 Panel Gp-Control -Control Panel
| 09***73 | Screw-Machine; (M4x0.7x25-mm) | 5 |
| 14***58 | Washer; (4.4x7.3x1-mm Thk) | 5 |
| 14***89 | Spacer; (4.6x9.4x6.4-mm Thk) | 5 |
282-4981 Panel Gp-Control
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 40 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 40 |
| 09***92 | Washer, Tooth | 18 |
272-7855 Panel Gp-Control -Control Panel
| 09***73 | Screw-Machine; (M4x0.7x25-mm) | 5 |
| 14***58 | Washer; (4.4x7.3x1-mm Thk) | 5 |
| 14***89 | Spacer; (4.6x9.4x6.4-mm Thk) | 5 |
282-4986 Panel Gp-Control
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 24 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 3 |
| 26***78 | Panel As-Bottom | 1 |
266-8856 Panel Gp-Control
| 26***55 | Panel Group-Electrical | 1 |
| 26***56 | Panel Group-Control | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 4 |
272-7851 Panel Gp-Control
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 18 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 22 |
| 12***46 | Lockwasher | 4 |
267-9635 Panel Gp-Control -Skid, B-Series
| 14***38 | Pin | 4 |
| 14***47 | Collar | 4 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 2 |
266-8870 Panel Gp-Electrical
| 23***09 | Terminal; (3-Contact, 10-Ga To 22-Ga) | 2 |
| 26***85 | Harness As-Wiring; (Speed Adjust) | 1 |
| 26***27 | Potentiometer; (Voltage Adjust) | 1 |
266-8868 Panel Gp-Electrical
| 23***09 | Terminal; (3-Contact, 10-Ga To 22-Ga) | 2 |
| 26***20 | Potentiometer; (Electrical Panel) | 1 |
| 26***80 | Harness As-Wiring; (Voltage Adjust) | 1 |
266-8876 Panel Gp-Electrical
| 09***92 | Washer, Tooth | 4 |
| 14***72 | Fuse; (6-Ampere)(European Sourced) | 2 |
| 14***79 | Socket-Relay; (European Sourced) | 1 |
284-8851 Panel Gp-Electrical
| 20***98 | Insert-Threaded; (M5x0.8-Thd)(Threated M6) | 4 |
| 20***59 | Rail; (4.4-Dm Each) | 0 |
| 26***38 | Plate & Mounting As | 1 |
285-4982 Panel Gp-Electrical
| 16***02 | Holder-Fuse | 1 |
| 25***18 | Terminal-Blade; (14-Ga To 16-Ga) | 3 |
| 26***55 | Link; (Copper) | 1 |
266-8869 Panel Gp-Electrical
| 23***09 | Terminal; (3-Contact, 10-Ga To 22-Ga) | 2 |
| 26***80 | Harness As-Wiring; (Voltage Adjust) | 1 |
| 26***69 | Panel Group-Electrical | 1 |
266-8852 Panel Gp-Electrical
| 24***14 | Horn | 1 |
| 26***81 | Harness As-Alarm | 1 |
| 26***52 | Panel Group-Electrical | 1 |
266-5577 Panel Gp-Electrical
| 14***38 | Pin | 4 |
| 14***47 | Collar | 4 |
| 26***78 | Bolt; (M8x1.25x30-mm)(Marked Y) | 4 |
266-8864 Panel Gp-Electrical
| 20***30 | Relay; (12-Volt Dc) | 1 |
| 26***64 | Panel Group-Electrical | 1 |
| 26***31 | Marker-Terminal; (4)(Identification) | 1 |
267-9882 Panel Gp-Electrical
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
| 14***72 | Fuse; (6-Ampere)(European Sourced) | 1 |
| 16***02 | Holder-Fuse | 6 |
266-8859 Panel Gp-Electrical
| 14***94 | Relay; (Over Voltage) | 1 |
| 26***37 | Harness As-Wiring; (Control) | 1 |
| 26***59 | Panel Group-Electrical | 1 |
266-8850 Panel Gp-Electrical
| 20***12 | Contact | 1 |
| 22***35 | Block-Contact | 3 |
| 26***22 | Switch Group-Push Button; -Emergency Stop-Stop | 1 |
266-8848 Panel Gp-Electrical
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
| 16***02 | Holder-Fuse | 4 |
| 23***32 | Link; (Terminal)(2.5-mm, 3-Way) | 1 |
299-5940 Panel Gp-Electrical
| 19***37 | Screw; (8-32x1/2-In) | 6 |
| 20***98 | Insert-Threaded; (M5x0.8-Thd)(Threated M6) | 4 |
| 20***59 | Rail; (4.4-Dm Each) | 0 |
266-8879 Panel Gp-Electrical
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
| 16***02 | Holder-Fuse | 4 |
| 23***09 | Terminal; (3-Contact, 10-Ga To 22-Ga) | 5 |
266-8872 Panel Gp-Electrical
| 09***92 | Washer, Tooth | 4 |
| 14***72 | Fuse; (6-Ampere)(European Sourced) | 2 |
| 14***79 | Socket-Relay; (European Sourced) | 1 |
267-9885 Panel Gp-Electrical
| 09***92 | Washer, Tooth | 4 |
| 14***79 | Socket-Relay; (European Sourced) | 1 |
| 16***02 | Holder-Fuse | 5 |
268-0854 Panel Gp-Electrical
| 14***79 | Socket-Relay; (European Sourced) | 1 |
| 16***02 | Holder-Fuse | 4 |
| 20***30 | Relay; (12-Volt Dc) | 1 |
273-4862 Panel Gp-Electrical
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 8 |
| 09***57 | Screw-Machine; (M6x1x8.6-mm) | 4 |
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
268-0852 Panel Gp-Electrical
| 14***79 | Socket-Relay; (European Sourced) | 1 |
| 16***02 | Holder-Fuse | 4 |
| 20***30 | Relay; (12-Volt Dc) | 1 |
266-8860 Panel Gp-Electrical
| 14***95 | Relay; (480-Volt, Over Voltage) | 1 |
| 26***37 | Harness As-Wiring; (Control) | 1 |
| 26***60 | Panel Group-Electrical | 1 |
266-8875 Panel Gp-Electrical
| 09***92 | Washer, Tooth | 4 |
| 14***72 | Fuse; (6-Ampere)(European Sourced) | 2 |
| 14***79 | Socket-Relay; (European Sourced) | 1 |
266-8874 Panel Gp-Electrical
| 21***91 | Switch As-Rotary; (Battery Charger) | 1 |
| 22***35 | Block-Contact | 1 |
| 25***18 | Terminal-Blade; (14-Ga To 16-Ga) | 2 |
266-8863 Panel Gp-Electrical
| 20***30 | Relay; (12-Volt Dc) | 1 |
| 26***63 | Panel Group-Electrical | 1 |
| 26***28 | Marker-Terminal; (Identification) | 1 |
268-0860 Panel Gp-Electrical
| 09***92 | Washer, Tooth | 4 |
| 14***79 | Socket-Relay; (European Sourced) | 1 |
| 16***02 | Holder-Fuse | 6 |
266-5605 Panel Gp-Electrical
| 12***46 | Lockwasher | 1 |
| 25***58 | Bracket | 1 |
| 26***05 | Panel Group-Electrical | 1 |
284-8836 Panel Gp-Electrical
| 09***92 | Washer, Tooth | 4 |
| 26***10 | Battery Charger; (220-Volt) | 1 |
| 28***36 | Panel Group-Electrical | 1 |
266-8866 Panel Gp-Electrical
| 14***79 | Socket-Relay; (European Sourced) | 1 |
| 20***30 | Relay; (12-Volt Dc) | 1 |
| 23***09 | Terminal; (3-Contact, 10-Ga To 22-Ga) | 6 |
268-0850 Panel Gp-Electrical
| 09***92 | Washer, Tooth | 4 |
| 14***79 | Socket-Relay; (European Sourced) | 1 |
| 16***02 | Holder-Fuse | 6 |
266-8853 Panel Gp-Electrical
| 26***21 | Ammeter; (Alarm Module) | 1 |
| 26***79 | Harness As-Wiring | 1 |
| 26***53 | Panel Group-Electrical | 1 |
268-0849 Panel Gp-Electrical
| 09***92 | Washer, Tooth | 4 |
| 14***79 | Socket-Relay; (European Sourced) | 1 |
| 16***02 | Holder-Fuse | 5 |
268-1453 Panel Gp-Electrical
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 42 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 42 |
| 09***92 | Washer, Tooth | 20 |
269-3754 Panel Gp-Electrical
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 2 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 4 |
| 20***98 | Insert-Threaded; (M5x0.8-Thd)(Threated M6) | 22 |
266-8873 Panel Gp-Electrical
| 09***92 | Washer, Tooth | 4 |
| 14***72 | Fuse; (6-Ampere)(European Sourced) | 2 |
| 14***79 | Socket-Relay; (European Sourced) | 1 |
266-8849 Panel Gp-Electrical
| 20***12 | Contact | 1 |
| 22***46 | Switch As-Push Button; (Emergency Stop) | 1 |
| 22***35 | Block-Contact | 3 |
266-8871 Panel Gp-Electrical
| 26***71 | Panel Group-Electrical | 1 |
| 26***23 | Switch; (Speed Adjust) | 1 |
| 30***12 | Block-Terminal; (800-Volt, 24-Ampere) | 2 |
266-8865 Panel Gp-Electrical
| 14***79 | Socket-Relay; (European Sourced) | 1 |
| 20***30 | Relay; (12-Volt Dc) | 1 |
| 23***09 | Terminal; (3-Contact, 10-Ga To 22-Ga) | 6 |
266-8877 Panel Gp-Electrical
| 09***92 | Washer, Tooth | 4 |
| 26***18 | Charger-Battery; (12-Volt) | 1 |
| 26***77 | Panel Group-Electrical | 1 |
266-8855 Panel Gp-Electrical
| 14***90 | Diode As | 1 |
| 14***89 | Block-Terminal | 1 |
| 16***02 | Holder-Fuse | 1 |
268-0847 Panel Gp-Electrical
| 09***92 | Washer, Tooth | 4 |
| 14***79 | Socket-Relay; (European Sourced) | 1 |
| 16***02 | Holder-Fuse | 6 |
285-4975 Panel Gp-Electronic
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 12***95 | Screw-Pan Head; (M2.5x0.45x12-mm) | 4 |
| 16***12 | Washer-Hard; (2.7x6x0.5-mm Thk) | 4 |
275-5681 Panel Gp-Electronic
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 12***95 | Screw-Pan Head; (M2.5x0.45x12-mm) | 4 |
| 12***68 | Socket-Connector; (14-Ga) | 53 |
274-6362 Panel Gp-Electronic
| 09***26 | Lockwasher-Tooth; (M4 Id) | 6 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
274-6361 Panel Gp-Electronic
| 09***26 | Lockwasher-Tooth; (M4 Id) | 6 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
274-3854 Panel Gp-Electronic
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 09***61 | Strap; (Cable) | 1 |
| 12***95 | Screw-Pan Head; (M2.5x0.45x12-mm) | 4 |
274-3855 Panel Gp-Electronic
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 09***61 | Strap; (Cable) | 0 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
266-8828 Panel Gp-Electronic
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 09***61 | Strap; (Cable) | 1 |
| 12***95 | Screw-Pan Head; (M2.5x0.45x12-mm) | 4 |
274-6363 Panel Gp-Electronic
| 09***26 | Lockwasher-Tooth; (M4 Id) | 6 |
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
285-4977 Panel Gp-Electronic
| 09***26 | Lockwasher-Tooth; (M4 Id) | 1 |
| 09***61 | Strap; (Cable) | 1 |
| 12***95 | Screw-Pan Head; (M2.5x0.45x12-mm) | 4 |
274-3863 Panel Gp-Electronic
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 4 |
| 20***98 | Insert-Threaded; (M5x0.8-Thd)(Threated M6) | 8 |
| 27***61 | Panel As | 1 |
282-4978 Plate Gp-Cover
| 09***92 | Washer, Tooth | 4 |
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 4 |
| 26***92 | Nut; (M5x0.8-Thd) | 4 |
321-6705 Plate Gp-Cover
| 19***42 | Lock As | 1 |
| 32***05 | Plate Group-Cover | 1 |
| 32***07 | Plate-Cover | 1 |
254-3619 Plate Gp-Cover -Enclosure
| 19***42 | Lock As | 1 |
| 25***19 | Plate Group-Cover; -Enclosure | 1 |
| 25***20 | Plate-Cover | 1 |
275-7558 Plate Gp-Cover
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 4 |
| 19***39 | Seal; (Each Includes 44-Dm) | 0 |
| 21***08 | Bolt; (M8x1.25x25-mm) | 4 |
275-5577 Seal Gp-Enclosure
| 24***70 | Grommet; (European Sourced) | 1 |
| 27***77 | Seal Group-Enclosure | 1 |
271-8326 Support Gp-Control
| 14***38 | Pin | 4 |
| 14***47 | Collar | 4 |
| 26***78 | Bolt; (M8x1.25x30-mm)(Marked Y) | 4 |
270-2915 Support Gp-Control -C Series Standard
| 12***46 | Lockwasher | 1 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 2 |
| 25***58 | Bracket | 1 |
266-5582 Support Gp-Control
| 14***38 | Pin | 4 |
| 14***47 | Collar | 4 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 2 |
266-5606 Support Gp-Control
| 12***46 | Lockwasher | 1 |
| 25***58 | Bracket | 1 |
| 26***06 | Support Group-Control | 1 |
270-2908 Support Gp-Control -C Series Ul Charger
| 12***46 | Lockwasher | 1 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 2 |
| 25***58 | Bracket | 1 |
271-8328 Support Gp-Control
| 14***38 | Pin | 4 |
| 14***47 | Collar | 4 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 2 |
271-8318 Support Gp-Control
| 14***38 | Pin | 4 |
| 14***47 | Collar | 4 |
| 26***75 | Panel As | 1 |
270-2933 Support Gp-Control
| 12***46 | Lockwasher | 1 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 2 |
| 26***78 | Bolt; (M8x1.25x30-mm)(Marked Y) | 2 |
Prime Package
266-5758 Mounting Gp-Heater
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 26***49 | Adapter-Pipe | 1 |
| 26***94 | Clamp | 4 |
266-2876 Mounting Gp-Panel -Dual Breaker
| 12***46 | Lockwasher | 1 |
| 14***56 | Insulator | 2 |
| 18***48 | Insert-Threaded; (M8x1.25-Thd) | 4 |
258-5208 Panel Gp-Rear -Enclosure
| 25***33 | Bolt-Flange Head; (M6x1x16-mm, Self Locking) | 9 |
| 25***08 | Panel Group-Rear; -Enclosure | 1 |
| 25***09 | Panel-Rear; (Rh) | 1 |
Service Equipment And Supplies
6l-4502 Chart-Plate & Film
| 26***95 | Film Group | 1 |
| 26***97 | Film Group | 1 |
| 26***99 | Film Group | 1 |
264-6895 Film Gp
| 26***95 | Film Group | 1 |
| 30***29 | Film-Identification; (Cat) | 1 |
| 30***33 | . Washer, Film-Identification; (Caterpillar) | 1 |
268-0829 Film Gp
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 14***43 | Film-Information; (Diesel Fuel Fill)(Info Diesel Fuel Fill) | 1 |
| 14***48 | Film-Information; (Positive, Negative) | 1 |
266-2463 Film Gp
| 26***63 | Film Group | 1 |
| 30***29 | Film-Identification; (Cat) | 1 |
| 30***33 | . Washer, Film-Identification; (Caterpillar) | 1 |
271-8301 Film Gp
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 14***43 | Film-Information; (Diesel Fuel Fill)(Info Diesel Fuel Fill) | 1 |
| 14***75 | Film-Information; (Oil Drain)(Oil Drain) | 1 |
271-8302 Film Gp
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 14***43 | Film-Information; (Diesel Fuel Fill)(Info Diesel Fuel Fill) | 1 |
| 14***75 | Film-Information; (Oil Drain)(Oil Drain) | 1 |
271-8303 Film Gp
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 14***43 | Film-Information; (Diesel Fuel Fill)(Info Diesel Fuel Fill) | 1 |
| 14***75 | Film-Information; (Oil Drain)(Oil Drain) | 1 |
268-2593 Film Gp
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 14***43 | Film-Information; (Diesel Fuel Fill)(Info Diesel Fuel Fill) | 1 |
| 14***75 | Film-Information; (Oil Drain)(Oil Drain) | 1 |
264-6897 Film Gp
| 26***97 | Film Group | 1 |
| 29***45 | Film-Identification; (Cat)(Cat) | 2 |
| 30***29 | Film-Identification; (Cat) | 1 |
268-0830 Film Gp
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 14***43 | Film-Information; (Diesel Fuel Fill)(Info Diesel Fuel Fill) | 1 |
| 14***75 | Film-Information; (Oil Drain)(Oil Drain) | 1 |
273-7594 Film Gp
| 26***39 | Film-Certification | 1 |
| 27***94 | Film Group | 1 |
265-6538 Film Gp
| 26***70 | Film Group; (Fuel Tank) | 1 |
| 26***77 | Film-Information | 1 |
| 26***84 | Film-Information | 1 |
264-6899 Film Gp
| 22***70 | Film | 2 |
| 26***13 | Film-Caterpillar | 1 |
| 26***99 | Film Group | 1 |
268-2597 Film Gp
| 26***70 | Film Group; (Fuel Tank) | 1 |
| 26***97 | Film Group | 1 |
| 30***86 | Film-Warning; (Fuel Tank Capacity) | 1 |
264-6900 Film Gp
| 23***42 | Film-Information; (Phone, Internet Contact)(Cat) | 2 |
| 23***44 | Film-Identification; (Xq30) | 1 |
| 26***00 | Film Group | 1 |
205-7860 Film Gp -Product Identification
| 20***60 | Film Group; -Product Identification | 1 |
| 23***86 | Plate-Identification; (Machine)(17-Pin) | 1 |
271-8300 Film Gp
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 14***43 | Film-Information; (Diesel Fuel Fill)(Info Diesel Fuel Fill) | 1 |
| 14***48 | Film-Information; (Positive, Negative) | 1 |
286-5505 Parts Gp-Miscellaneous
| 13***77 | Splice-Wire | 3 |
| 24***05 | Terminal-Blade; (14-Ga To 16-Ga) | 3 |
| 28***05 | Parts Group-Miscellaneous | 1 |
C3.3 serial number reference
The C3.3 serial/PIN plate sits on the engine block near the front right side by the fuel injection pump on standalone industrial engines, and on a nameplate mounted to the generator set frame or control panel enclosure on factory-built gensets. The plate carries the full Product Identification Number; the first three characters are the serial number prefix identifying the specific engine or genset arrangement, and the digits after that are the sequential unit number built under that arrangement. Match only the 3-character prefix against the arrangement list, not the full PIN, to confirm parts commonality.
| Prefix | Identifies | Notes |
|---|---|---|
| N3C | C3.3 generator set engine arrangement, non-turbocharged | Non-turbo C3.3 genset engine serial. Grouped with NCC, N3X and X3B as the naturally aspirated genset family, Tier 3 genset emissions rating. In-line 3-cylinder, 105 mm bore x 127 mm stroke, 3.3 L displacement. Used in Olympian-branded genset models sharing this engine arrangement. |
| NCC | C3.3 generator set engine arrangement, non-turbocharged | Non-turbo C3.3 genset engine serial in the same family as N3C/N3X/X3B, same Tier 3 genset rating and 105 mm x 127 mm 3.3 L specification. Documented on more than one engine-parts and manual reference, but not on Caterpillar's own parts catalog directly - confirm with dealer. |
| N3X | C3.3 generator set engine arrangement, non-turbocharged | Non-turbo C3.3 genset engine serial, same family and specification as N3C/NCC/X3B. Also appears in a factory operation and maintenance manual covering C3.3 and C4.4 rental generator sets, listed as its own C3.3 serial break separate from the C4.4 serials in that same manual. |
| X3B | C3.3 generator set engine arrangement, non-turbocharged | Non-turbo genset engine serial in the same family as N3C/NCC/N3X. Also carries its own standalone operation and maintenance manual serial break for the C3.3 generator set, and appears alongside N3X in the combined C3.3/C4.4 rental generator set manual as the C3.3-specific break. |
| EC3 | C3.3DE33E0 generator set arrangement | Serial break EC300001-up covers the C3.3DE33E0 configuration, a lower-output C3.3 genset arrangement. Confirmed against Caterpillar's own parts catalog for this arrangement, including electronic control panel and air cleaner attachment listings tied to the EC3 serial break. |
| EC5 | C3.3 DE50E0 / DE55E0 / DE65E0 / DE50E2 generator set arrangement | Serial break EC500001-up covers the higher-output C3.3 genset configurations, confirmed against Caterpillar's own parts catalog for this arrangement group. Cat's own spec sheets place the overall C3.3 genset range at roughly 24-65 kVA (50 Hz) or 27-60 kW (60 Hz), varying by configuration within that family. Engine-level components within this genset serial break carry the E3G/E3S engine serial prefixes. |
| E3G | C3.3 turbocharged engine arrangement used inside EC5-prefixed generator sets | Turbocharged C3.3 engine serial. Tied to the C3.3 DE50E0-family generator set arrangement in Caterpillar parts catalog listings and dedicated turbo engine-parts references. Confirm exact production/cutoff years with dealer. |
| E3S | C3.3 turbocharged engine arrangement used inside EC5-prefixed generator sets | Paired with E3G as a turbocharged engine serial prefix inside the C3.3 DE50E0-family generator set parts catalog. Confirm exact production/cutoff years with dealer. |
| E3J | C3.3 industrial engine, turbocharged | Industrial (non Cat-branded genset) turbocharged C3.3 engine arrangement, confirmed on a dedicated turbo engine-parts reference. Also documented as the engine fitted to Olympian-brand generator set models in parts application charts, and covered by standalone industrial engine service literature. |
| E3K | C3.3 industrial engine | Second industrial engine serial prefix for the C3.3, covered by its own standalone industrial engine service manual. Turbo/non-turbo status not clearly documented for this prefix - confirm with dealer. |
Frequently asked questions
What engine does the Caterpillar C3.3 generator set use?
A Cat C3.3 engine: a 3-cylinder, 3.3-liter (201 cu in) inline four-stroke diesel built on the Perkins 1103 platform, with a mechanical governor and inline fuel injection. Lower-kVA models run naturally aspirated at a higher compression ratio; models toward the top of the kVA range run turbocharged at a lower compression ratio. This is the Perkins-1103-based genset engine, distinct from the unrelated Kubota-based C3.3B used in Cat compact track loaders and skid steers.
What is the operating weight of the C3.3 generator set?
It varies by configuration/series. Dry weight runs from roughly 750-830 kg (1650-1830 lb) on the smallest open-skid, naturally aspirated units (around 33 kVA standby) up to about 1030 kg (2270 lb) on the largest turbocharged, canopied 65 kVA units. Operating weight with coolant, oil, and a partial fuel load runs somewhat higher than the published dry figure; check the specific model's spec sheet for an exact number.
What replaced the Caterpillar C3.3 generator set?
No single documented successor model is confirmed. Cat has kept the C3.3 in production across multiple emissions tiers for different regional markets, and for higher power needs the compact genset lineup steps up to the larger-displacement C4.4 family. Verify current availability and any regional replacement with a Cat dealer. Note this is distinct from the unrelated C3.3B, a Kubota-based engine used in Cat compact track loaders and skid steers, not in this generator set.
What C3.3 owners discuss
What engine actually powers the Cat C3.3 generator set, and is it the same C3.3 found in Cat skid steers and compact track loaders?
No. Genset spec sheets list the C3.3 as an inline-3, 4-stroke, 3.3 L diesel (105 mm x 127 mm bore x stroke), offered naturally aspirated or turbocharged depending on rating. It's built on the Perkins 1103 platform and shows up on some engine tags as 1103D-33 series, which makes sense since Perkins supplies Caterpillar's small-displacement industrial and genset engines. That's a different sourcing path than the C3.3B fitted to compact track loaders and skid steers of the same era, which uses a Kubota-built block. Owners chasing parts or a troubleshooting bulletin for "C3.3" sometimes pull the wrong procedure because the naming overlaps. Have your dealer verify which block and rating plate you actually have, by serial number, before ordering major components or applying a service bulletin.
What's the most common hard-start or rough-running complaint on these units?
Fuel injection pump wear or timing drift is the recurring theme on this engine family - it uses a distributor-type (Bosch VE-style) injection pump on many ratings, and as it wears, owners report hard cold starts, excess smoke, and rough idle. Clogged fuel filters, water in the fuel, and restricted air filters are named as common contributors that mimic pump failure, so those get checked first. For isolating a single misfiring cylinder, the field technique is loosening each high-pressure fuel line in turn with the engine running; if every cylinder is affected instead of one, the fault points upstream to fuel supply or filtration rather than an injector. Injection timing and pump calibration are safety- and performance-critical adjustments - have your dealer verify and reset timing rather than adjusting it by feel.
What typically causes these gensets to run hot, and how do people diagnose it in the field?
The same short list comes up repeatedly: low coolant, a fin-clogged radiator, a stuck thermostat, or a failing water pump, in roughly that order of likelihood. A quick field check is comparing upper and lower radiator hose temperature by hand - if the upper hose gets very hot while the lower hose stays cold, the thermostat is suspected of sticking closed. Radiator fins clogged with dust or debris (common on standby sets that sit outdoors or in dusty enclosures) get cleaned with low-pressure air or water from the engine side outward, not the front, to avoid packing debris deeper into the core. Total coolant system capacity is documented around 10.2 L (2.7 US gal) on Cat's factory spec sheet, though this varies by radiator/enclosure configuration.
Is it bad to run one of these generators lightly loaded for long periods?
Yes, and this is a recurring theme in generator maintenance guides generally, applied here to the C3.3: standby sets that idle along under roughly 30% of rated load for extended stretches are prone to wet stacking - unburned fuel, oil, soot, and condensed moisture building up in the exhaust and combustion chamber instead of burning off. The fix guides converge on is periodic higher-load exercise runs, or a load bank test, rather than letting a standby unit run indefinitely near idle. If a set has a documented history of light-duty or exercise-only running, budget for an inspection of the turbo, exhaust, and injectors even if it looks low-hours on paper.
What electrical or sensor issues come up most with the control panel on these sets?
C3.3 gensets typically pair with a Cat EMCP 3-series control panel, and a chunk of the reported "sensor fault" or nuisance-shutdown complaints trace back to wiring or voltage-drop problems between the engine ECM and the EMCP rather than an actual failed sensor - the ECM can show good voltage while the EMCP panel itself is starved, which triggers a shutdown that looks like a sensor fault. On older EMCP3 firmware, some major faults reportedly only clear with a full battery disconnect/reconnect rather than a panel reset. Because a false coolant-temperature or oil-pressure shutdown can mask a real problem underneath it, have your dealer pull the actual sensor reading with a diagnostic tool before writing off a shutdown as a nuisance fault.
Are all C3.3 generator sets the same engine internally, or does output rating change the hardware?
It varies by rating and emissions strategy, not just by displacement. The naturally aspirated versions top out in the low-to-mid 30s kVA standby (up to roughly 37.5 kVA at 60 Hz on some emissions strategies), while turbocharged versions extend the same base engine up to roughly 55-75 kVA standby depending on 50 Hz or 60 Hz and emissions certification (EU IIIA, Low BSFC, or non-certified). Compression ratio and the presence of a turbo therefore differ across the lineup even though every version is marketed as "C3.3." Confirm the exact model/rating code on the nameplate before assuming parts, filters, or a service bulletin carry over between two C3.3 units.
What should a buyer check before purchasing a used Cat C3.3 generator set?
Get the run-hour count and full maintenance log, and specifically ask whether the set has a history of extended light-load or standby-only duty, since that raises the odds of wet-stacking-related wear in the exhaust and turbo. Ask for a load bank test report or video showing the set holding its rated output without excessive smoke or a temperature climb. Physically inspect the radiator core and coolant condition, fuel tank and lines for rust or contamination, and the control panel's alarm/fault history for repeat codes rather than one-off events. Check the generator end for bearing noise and confirm insulation resistance if possible. Because the C3.3 name covers multiple engine ratings and at least one differently-sourced platform under related model codes, confirm the exact engine variant and rating plate against the paperwork. Have your dealer pull the ECM fault history and verify hours against the engine serial number before finalizing the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar C3.3. Related factory variants of the same model family:
C3.3
Need a specific C3.3 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.