Caterpillarengine - machine(no series)
Caterpillar C2.2
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar C2.2 is a standalone industrial diesel engine, not a complete machine - a 2.2 L (135 in3), inline 4-cylinder, cast-iron-block unit sold to OEMs for pumps, generator sets, compressors, and similar equipment. It ships in two distinct generations under the same C2.2 designation: an earlier mechanical, indirect-injection engine offered naturally aspirated, turbocharged, or turbocharged-aftercooled, and a later electronic common-rail, direct-injection engine offered turbocharged or turbocharged-aftercooled only. Bare net dry weight runs roughly 184-194 kg (406-428 lb) on the mechanical generation and about 230 kg (507 lb) on the electronic generation, before any OEM-fitted radiator, tank, or mounting hardware is added. The C2.2 name carries forward Caterpillar's earlier 3024C engine architecture into the Tier 4 Final/Stage V emissions era, and Cat continues to list the C2.2 as a current product in its industrial diesel engine lineup.
Across the two generations, the main change is the fuel system and emissions hardware. The mechanical generation runs a jerk-type injection pump with no electronic controls or fault codes at all, while the common-rail generation adds a roughly 2000-bar rail, an engine control module on a CAN bus, and, depending on rating, either a diesel particulate filter or a regeneration-free oxidation-catalyst-only setup. Compression ratio drops from 23.3:1 on the mechanical generation to 18:1 on the common-rail generation, and rated speed moves from a 2200-3000 rpm range down to a fixed 2800 rpm. The same C2.2 engine, in its later electronic form, is also the fitted powerplant in Caterpillar's own 216B3, 226B3, 226D3, 232D3, and 239D3 compact track loaders and skid steer loaders - which is why C2.2 parts and service demand runs heavy in that used-machine and OEM-equipment market. This page covers the engine itself; the weight, dimensions, and lift specs of those host machines belong to their own model pages.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar C2.2 specifications
Engine
| Engine family | Cat C2.2 industrial diesel, in-line 4-cylinder, 4-stroke-cycle, cast iron block. Two distinct fuel-system generations exist under the same C2.2 designation - a mechanical/indirect-injection generation and a later electronic common-rail/direct-injection generation. Not to be confused with the 3-cylinder C1.7, which shares the same OMM book but is a different engine. |
| Bore x stroke | 84 mm x 100 mm (3.3 in x 3.9 in) - same on both generations |
| Displacement | 2.2 L / 2.216 L (135 in3) |
| Compression ratio - mechanical/indirect-injection generation | 23.3:1, naturally aspirated (NA), turbocharged (T) or turbocharged-aftercooled (TA) |
| Compression ratio - electronic common-rail generation | 18:1, turbocharged (T) or turbocharged-aftercooled (TA) only - no naturally aspirated option offered on this generation |
| Power - mechanical/indirect-injection generation | 31-45.5 bkW (41.6-61 bhp) at a rated-speed range of 2200-3000 rpm, depending on the selected rating |
| Power - electronic common-rail generation | 36.4-50 bkW (48.8-67.1 bhp) at a fixed rated speed of 2800 rpm, depending on the selected rating |
| Torque | Around 208 Nm (153 lb-ft) at 1800 rpm is reported for the higher-output ratings. Cat's own factory spec sheets publish power only, not a torque figure, so treat this as approximate and confirm against the specific rating code. |
| Fuel system - mechanical generation | Jerk-type fuel injection pump, indirect injection, spin-on fuel filter, electronic shut-off solenoid |
| Fuel system - electronic generation | High-pressure common rail, roughly 2000 bar, direct injection, chassis-mounted electronic control unit, SAE J1939 CAN bus interface, water-in-fuel detection |
| Emissions - mechanical generation | U.S. EPA Tier 4 Final; EU Stage IIIA or EU Stage IIIB depending on the rating selected |
| Emissions - electronic generation | U.S. EPA Tier 4 Final, EU Stage IIIB |
| Aftertreatment - mechanical/Stage IIIB ratings | Diesel Particulate Filter (DPF, wall-flow) plus Diesel Oxidation Catalyst (DOC, through-flow); passive regeneration under most cycles with automatic active regeneration backup |
| Aftertreatment - electronic/Stage IIIB ratings | Diesel Oxidation Catalyst (DOC) only, regeneration-free design |
| Cold-start capability | Glow-plug starting aid; rated to start down to -20 degC (-4 degF) |
| Rotation | Counterclockwise, viewed from the flywheel end |
Weights
| Net dry weight (basic engine, no optional attachments) - mechanical generation | 184-194 kg (406-428 lb), varies with aspiration and accessory selection |
| Net dry weight (basic engine, no optional attachments) - electronic generation | About 230 kg (507 lb) |
| Aftertreatment add-on weight - mechanical/DPF+DOC ratings | About 16 kg (35 lb) |
| Aftertreatment add-on weight - electronic/DOC-only ratings | About 5.8 kg (12.8 lb) |
| Shipping weight / ground pressure | Not published. This is a bare industrial engine sold for OEM integration, not a complete machine, so a crated shipping weight and ground pressure figure are not part of the factory spec sheet. |
Dimensions
| Overall engine envelope - mechanical generation | Length 660 mm (26 in), width 459-531 mm (18-20.9 in) depending on options, height 725 mm (28.5 in) - approximate, final dimensions depend on selected accessories |
| Overall engine envelope - electronic generation | Length 764 mm (30.1 in), width 545 mm (21.5 in), height 736 mm (28.9 in) - approximate, final dimensions depend on selected accessories |
| Aftertreatment package - mechanical/DPF+DOC ratings | Length about 449 mm (17.6 in), diameter about 198 mm (7.8 in) |
| Aftertreatment package - electronic/DOC-only ratings | Length about 408 mm (16.1 in), diameter about 155 mm (6.1 in) |
| Wheelbase, track gauge, ground clearance | Not applicable. The C2.2 is a bare engine, not a rolling chassis; those figures belong to the machine it is installed in. |
Performance
| Rated speed range | 2200-3000 rpm on the mechanical/indirect-injection generation; fixed at 2800 rpm on the electronic common-rail generation |
| Gradeability | 35 degrees continuous, per the factory spec sheet (engine mounting/operating angle limit, not a machine climbing grade) |
| Service interval | Standard 500-hour service interval; DPF ash service interval about 3000 hours minimum on ratings fitted with a particulate filter |
| Travel speed, drawbar pull, lift/dig/dump capacity | Not applicable. The C2.2 is supplied as a bare industrial engine for pumps, compressors, generator sets, and similar OEM equipment - it has no travel, lift, or dig performance of its own. Those figures are set by the equipment builder that installs the engine. |
Service capacities (summary)
| Engine oil (crankcase, with filter) | 8.9-10.6 L (9.4-11.2 US qt) between the low and full dipstick marks, standard filter included; range covers both Turbocharged and Turbocharged-Aftercooled configurations. Recommended: Cat DEO-ULS diesel engine oil, SAE 10W-30 or 15W-40 by climate. |
| Cooling system - engine only (no factory radiator) | 3.6-4.3 L (3.8-4.5 qt) for the engine jacket alone, depending on generation/configuration. External radiator, hoses, and expansion tank add more, per the equipment builder's design. |
| Cooling system - total (with factory-installed radiator) | 8.3 L (2.2 US gal) on Turbocharged ratings; 9.3 L (2.45 US gal) on Turbocharged-Aftercooled ratings. Recommended: Cat ELC preferred or Cat DEAC/commercial heavy-duty antifreeze meeting ASTM D6210, mixed 1:1 water to glycol. |
| Fuel tank | Not specified by Cat for this engine. The C2.2 is a bare industrial engine and the fuel tank is supplied by the equipment builder; capacity varies by application. Fuel must be ultra-low sulfur diesel, 15 ppm sulfur or less. |
| Hydraulic system | Not applicable. The C2.2 has no onboard hydraulic system of its own; any hydraulic circuit belongs to the machine it powers. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
C2.2 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 8.9-10.6 L (9.4-11.2 US qt) between the low and full marks on the dipstick, standard factory-installed oil filter included; auxiliary or remote filter systems need extra oil per the equipment builder's spec. Same range covers both the Turbocharged and Turbocharged Aftercooled C2.2 variants. | Cat DEO-ULS multigrade diesel engine oil, SAE 10W-30 or SAE 15W-40 depending on climate. The viscosity chart spans 0W-40 through 15W-40 for ambient temperatures from about -40 to 50 degC (-40 to 122 degF); use the highest viscosity that still meets the cold-start temperature. Typical oil pressure on SAE 10W-30 runs 207-413 kPa (30-60 psi) at rated rpm. |
| Cooling system - engine only (no factory-installed radiator) | 3.9 L (1.03 US gal) for the engine jacket alone. External/OEM cooling system components (radiator, hoses, expansion tank) add more - capacity varies by application, add per the equipment builder's spec to get the total system fill. | Cat ELC (Extended Life Coolant) preferred, or a commercial extended-life coolant meeting the Cat EC-1 spec. Cat DEAC (Diesel Engine Antifreeze/Coolant) or a commercial heavy-duty antifreeze meeting ASTM D6210 is acceptable. Mix 1:1 water to glycol - this ratio is required for the NOx reduction system to operate correctly at high ambient temperature. Do not use an antifreeze that only meets the light-duty automotive ASTM D3306 spec. |
| Cooling system - total system (factory-installed radiator) | 8.3 L (2.2 US gal) on the Turbocharged variant; 9.3 L (2.45 US gal) on the Turbocharged Aftercooled (charge-air-cooled) variant - varies by configuration. Radiator filler cap relief pressure is 110 kPa (15.9 psi) on the four-cylinder engine. | Same fluid as the engine-only cooling system: Cat ELC preferred, Cat DEAC acceptable, 1:1 water-to-glycol mix. Coolant service life: Cat ELC runs 12,000 hours or six years (add ELC Extender at 6,000 hours or half the service life); Cat DEAC or a commercial ASTM D6210 heavy-duty antifreeze runs 3,000 hours or three years (add an extender at half the service life). |
| Fuel tank | Not specified by Cat for this engine - the C2.2 is sold as a bare industrial engine for OEM integration and the fuel tank is supplied by the equipment builder; capacity varies by application. | Ultra-low sulfur diesel only, sulfur content 15 mg/kg (15 ppm) or less - the engine is certified only on this fuel. Fuel blends above 20 percent biodiesel are not recommended. A fuel system cleaner treatment around every 3,000 hours is suggested if a power loss from injector deposits is observed. |
| Grease (general lubrication points, spec only) | Not published for this engine - no factory grease-point fill volumes are listed in the OMM. | Use a Caterpillar grease that meets or exceeds the equipment builder's performance requirement for the application and climate; consult your Cat dealer for the specific product and viscosity/consistency grade. All Cat-branded greases are compatible with each other, but purge the joint when switching grease brand or type. |
| Transmission, hydraulic system, final drives, axles | Not applicable | The C2.2 is a bare four-cylinder industrial engine (Turbocharged or Turbocharged Aftercooled) built for OEM integration into pumps, generator sets, compressors and similar equipment. Cat does not supply a transmission, hydraulic system, final drives, or axles with this engine - refer to the equipment builder's manual for those systems where fitted downstream of the engine. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar C2.2 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 12,000 h |
|
Servicing the C2.2 beyond the schedule
Predictive maintenance & fluid analysis
Run S.O.S oil sampling on every scheduled oil change, especially on the mechanical-pump generation where a worn injection pump plunger or delivery valve raises fuel dilution in the oil before it shows on a dipstick. Track coolant condition against Cat ELC or DEAC service-life limits rather than assuming a fixed interval. On common-rail units, log rail-pressure sensor readings and watch for chafed harness connectors at the sensor, a common early flag for rough-running complaints before a real fuel-system fault develops.
Corrective & common repairs
Fuel weeping at the delivery valves and black smoke that clears when a line is cracked open point to a sticking delivery valve or worn pump plunger on the mechanical generation, not bad fuel. After any injection-pump teardown, verify governor and shutoff-linkage engagement before returning the engine to service - a misaligned linkage can leave it unable to shut off at the key. On common-rail units, chase regen-warning complaints as a fuel-spec or intake-leak issue before swapping the rail-pressure sensor.
Overhaul & rebuild points
Confirm which fuel-system generation is fitted before ordering a long block, head, or injector set - mechanical-pump and common-rail parts don't interchange despite the shared C2.2 badge. Early production carried a head gasket prone to premature failure and an oil pickup tube that could starve pressure at low sump level; both were later running changes, so check pressure with a gauge on an older unit rather than assume it's fixed. White smoke with hard, prolonged cranking signals worn rings - confirm with a compression or leak-down test before pulling it.
Seasonal & environment servicing
Cold-start aid is a glow-plug system rated to about -20 degC (-4 degF); verify glow-plug function before winter layup rather than after a no-start call. Match coolant mix to climate at 1:1 water-to-glycol minimum, since the ratio also governs NOx-reduction performance on the electronic generation, not just freeze protection. In hot, dusty OEM installations (pumps, gensets, compressors), check the air filter restriction indicator more often than the standard interval and confirm the radiator core and charge-air cooler stay clear of debris.
C2.2 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1G-7206 | Filter-Fuel | Fuel system service | Check fitment → |
| 231-0167 | Filter Element As-Air | Air intake service | Check fitment → |
| 231-0168 | Filter Element As-Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
| 220-1523 | Filter As-Engine Oil | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
C2.2 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| No CID/FMI code (mechanical/indirect-injection generation) | Early naturally aspirated, indirect-injection C2.2 variants run a mechanical governor and jerk-type fuel system with no engine control module, so there is no electronic fault code to read. | Not applicable — abnormal running conditions show up as an out-of-range gauge reading or a warning lamp (oil pressure, coolant temperature, charge/alternator), not a stored code. | Diagnose with gauges, pressure switches, and a visual/mechanical inspection; a code reader or Cat ET session has nothing to report on this generation. |
| 100-3 / 100-4 | Engine Oil Pressure sensor circuit voltage is outside the expected range (open circuit reads high, short to ground reads low), separate from an actual low-pressure condition. | Corroded or damaged sensor connector, chafed harness wiring, or a failed oil pressure sensor. | Confirm actual oil level and pressure first, then inspect the sensor connector and wiring for corrosion or damage before replacing the sensor. |
| 110-3 | Engine Coolant Temperature sensor circuit reads an open circuit or short to a high-voltage source, distinct from a genuine overheat condition. | Damaged or corroded sensor wiring/connector, or a failed coolant temperature sensor. | Check coolant level and radiator/fin condition, then inspect the sensor and its wiring before condemning the sensor. |
| 168-1 | Electrical System (battery/charging) voltage is below the normal operating range. | Weak or discharged battery, loose or corroded battery/ground connections, worn or slipping alternator belt, or a failing alternator. | Load-test the battery, clean and tighten all battery and ground connections, then check alternator output under load. |
| 190-8 | Engine Speed/Timing sensor signal is abnormal in frequency, pulse width, or period rather than simply missing. | Incorrect sensor-to-tone-ring air gap, a damaged tone-ring tooth, or a corroded sensor connector. | Check and reset the sensor air gap, inspect the tone ring for damage, and clean or reseat the connector before replacing the sensor. |
| 102-3 / 102-4 | Boost/intake manifold pressure sensor circuit reads outside the expected voltage range; applies only to turbocharged and turbocharged-aftercooled C2.2 builds. | Restricted or dirty air filter skewing the reading, damaged sensor wiring, or a failed boost pressure sensor. | Check air filter and intake tract for restriction, inspect sensor wiring and connector, replace the sensor if wiring tests good. |
| 157 (fuel/injection rail pressure — FMI varies) | Common-rail fuel pressure reads above or below the commanded target; applies only to the later electronic common-rail/direct-injection C2.2, not the mechanical generation. | Restricted or clogged fuel filter, air drawn into the low-pressure fuel circuit, a faulty rail pressure sensor, or a worn high-pressure pump. | Change fuel filters and bleed the low-pressure system first, then verify rail pressure sensor readings before inspecting the high-pressure pump. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
C2.2 attachments & work tools
Buckets
General-purpose, multipurpose (clamshell-jaw), low-profile, and utility/grapple buckets are offered for this size class. Widths and capacities run in the roughly 0.4-0.65 m3 (0.5-0.85 cu yd) range for standard general-purpose buckets on this frame size, with multipurpose and grapple buckets trading some capacity for the added clamp structure.
Pallet forks
Mount on the same Class II skid-steer coupler as the buckets. Carriage width is a fixed roughly 1270 mm (50 in) sized to fit the full machine range, with tine lengths offered at about 900 mm and 1070 mm (36 in and 42 in). Rated capacity is set to the top end of the machine class, so lift capacity is governed by the carrier, not the fork.
Dozer/grader (angling) blades
This catalog's own work-tool listing includes angling-blade assemblies with bolt-on edge guards in roughly 1700-1800 mm (66-72 in) classes, consistent with a small/mid-frame loader host. Wider grader-blade work tools for this size class run up to about 2400 mm (96 in) with optional wing extensions; current-generation hosts with electronic work-tool recognition add joystick-based angle and tilt control from the cab.
Material-handling arm / grapple
A clamp-jaw arm group pairs with the multipurpose bucket (or mounts standalone) for handling irregular loads such as pipe, bales, or brush. It uses the same coupler and standard auxiliary-hydraulic circuit as the buckets, no separate hydraulic kit required.
Coupler/mounting system
Standard mounting across this class is a mechanical Class II skid-steer quick-coupler, changed from outside the cab. Current-generation hosts in this size class offer a factory electric (in-cab) coupler option so tools can be swapped without the operator leaving the seat.
Auxiliary hydraulics / flow packages
Standard auxiliary flow for machines in this class runs roughly 59-83 L/min (15.6-22 gpm) depending on model size within the range; figures vary by configuration/series. A high-flow hydraulic package is offered for flow-demanding tools (mulchers, snow blowers, cold planers, power brooms), and later-generation hosts can auto-detect a high-flow tool and switch circuits via the machine ECM.
Guarding options
Blade edge guards are standard on the angling and grading blades in this catalog's own work-tool section. Lift-arm and cylinder guards are offered for demolition or forestry-type duty, and cab screens (polycarbonate or wire mesh, front/top/rear) are available as factory or dealer-installed protection when running brush cutters, grapples, or mulching heads.
Seasonal / specialty tools
Snow blades, snow blowers, angle brooms, augers, and trenchers are all offered for this size class and mount through the same Class II coupler. Higher-draw tools in this group (blowers, planers, mulchers) call for the optional high-flow hydraulic package rather than the standard circuit.
All C2.2 assemblies by section
Every catalogued assembly group for the Caterpillar C2.2. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
228-1773 Air Cleaner Gp
| 16***00 | Washer-Hard; (8x16x2-mm Thk) | 5 |
| 21***48 | Spacer; (8.8x16x4-mm Thk) | 1 |
| 22***73 | Air Cleaner Group | 1 |
242-0171 Air Cleaner Gp
| 22***35 | Hose-Air | 1 |
| 24***71 | Air Cleaner Group | 1 |
| 5P***97 | Clamp Fumes Disposal | 1 |
265-4419 Kit-Debris Guard -Turbocharger, Exhaust Manifold
| 15***92 | Nut | 2 |
| 15***26 | Manifold-Exhaust | 1 |
| 15***27 | Gasket-Exhaust | 1 |
218-0944 Lines Gp-Air
| 15***92 | Nut | 2 |
| 15***26 | Manifold-Exhaust | 1 |
| 15***27 | Gasket-Exhaust | 1 |
160-3568 Manifold Gp-Exhaust
| 14***18 | Clamp-Pipe | 1 |
| 15***20 | Gasket | 1 |
| 16***68 | Manifold Group-Exhaust | 1 |
309-6724 Manifold Gp-Exhaust
| 25***77 | Pin As-Spring | 1 |
| 28***70 | End-Yoke Rod | 1 |
| 30***24 | Manifold Group-Exhaust | 1 |
272-3049 Muffler Gp
| 21***65 | Pedal Group-Governor; -Includes Lever | 1 |
| 23***96 | Screw-Flat Head; (M6x1x35-mm) | 4 |
| 26***80 | Bracket-Stop | 1 |
Basic Engine
322-7958 Camshaft Gp
| 15***92 | Key-Woodruff | 1 |
| 15***38 | Bolt | 2 |
| 15***80 | Plate | 1 |
217-7143 Camshaft Gp
| 15***92 | Key-Woodruff | 1 |
| 15***05 | Bearing | 1 |
| 15***08 | Gear-Camshaft; (66-Teeth) | 1 |
309-6722 Cover Gp-Valve Mechanism
| 15***39 | Gauze; (Crankcase Breather) | 1 |
| 15***62 | Bolt | 3 |
| 15***40 | Bolt | 2 |
217-5867 Cover Gp-Valve Mechanism
| 15***39 | Gauze; (Crankcase Breather) | 1 |
| 15***62 | Bolt | 3 |
| 15***40 | Bolt | 2 |
322-8395 Crankshaft Gp
| 15***02 | Dowel | 8 |
| 15***18 | Key | 1 |
| 15***81 | Cap As-Bearing | 1 |
217-1447 Crankshaft Gp
| 15***02 | Dowel | 8 |
| 15***18 | Key | 1 |
| 15***81 | Cap As-Bearing | 1 |
217-7395 Cylinder Block Gp
| 15***87 | Plug | 3 |
| 15***91 | Plug | 1 |
| 15***94 | Dowel | 2 |
322-8394 Cylinder Block Gp
| 23***15 | Plug; (Sealing) | 2 |
| 23***16 | Plug; (Sealing) | 5 |
| 32***94 | Cylinder Block Group | 1 |
319-7269 Cylinder Head As
| 15***87 | Plug | 3 |
| 15***91 | Plug | 1 |
| 15***94 | Dowel | 2 |
321-4061 Cylinder Head Gp
| 15***61 | Bolt | 2 |
| 15***88 | Nut | 4 |
| 15***46 | Stud | 4 |
322-8396 Cylinder Head Gp
| 15***54 | Seal | 4 |
| 15***56 | Pin-Cotter | 8 |
| 15***57 | Cap | 8 |
293-2086 Cylinder Head Gp
| 15***54 | Seal | 4 |
| 15***56 | Pin-Cotter | 16 |
| 15***57 | Cap | 8 |
229-8730 Drain Gp-Engine Oil
| 15***88 | Bolt | 14 |
| 15***89 | Bolt | 4 |
| 18***13 | Stud | 2 |
315-5252 Drain Gp-Engine Oil
| 15***05 | Gear-Starter; (126-Teeth) | 1 |
| 15***06 | Bolt | 6 |
| 31***52 | Drain Group-Engine Oil | 1 |
308-2291 Flywheel Gp
| 14***94 | Bracket As | 1 |
| 20***44 | Guard-Belt | 1 |
| 22***53 | Bracket As | 1 |
217-7221 Flywheel Gp
| 15***05 | Gear-Starter; (126-Teeth) | 1 |
| 15***06 | Bolt | 6 |
| 21***21 | Flywheel Group | 1 |
280-8396 Guard Gp-Belt
| 15***60 | Nut | 1 |
| 15***62 | Bolt | 3 |
| 15***38 | Bolt | 4 |
246-8723 Guard Gp-Belt
| 11***59 | Bolt; (M10x1.5x35-mm) | 1 |
| 12***99 | Bolt; (M10x1.5x40-mm) | 1 |
| 13***62 | Bolt; (M10x1.5x30-mm) | 4 |
316-7030 Housing Gp-Flywheel
| 15***60 | Nut | 1 |
| 15***62 | Bolt | 4 |
| 15***73 | Pin | 1 |
322-7771 Housing Gp-Front
| 15***75 | Bolt | 2 |
| 19***73 | Plate; (Front) | 1 |
| 19***74 | Plate; (Rear) | 1 |
217-7118 Housing Gp-Front
| 15***75 | Bolt | 2 |
| 19***73 | Plate; (Front) | 1 |
| 19***74 | Plate; (Rear) | 1 |
339-3017 Kit-Front Gear
| 14***53 | Bolt; (M14x1.5x30-mm) | 8 |
| 20***85 | Bracket As | 1 |
| 23***19 | Bracket As | 1 |
154-1877 Lifting Gp-Engine
| 15***77 | Lifting Group-Engine | 1 |
| 16***95 | Washer; (16.5x71.5x3-mm Thk) | 6 |
| 21***61 | Mount As | 3 |
316-6895 Lifting Gp-Engine
| 15***40 | Bolt | 4 |
| 15***33 | Plate | 1 |
| 31***95 | Lifting Group-Engine | 1 |
241-5789 Mounting Gp-Engine -Hardware
| 11***45 | Connector | 1 |
| 15***33 | Seal; (Engine Oil Filler Cap) | 1 |
| 15***36 | Washer | 2 |
228-1764 Mounting Gp-Engine -Supports
| 15***40 | Bolt | 4 |
| 15***33 | Plate | 1 |
| 22***64 | Mounting Group-Engine; -Supports | 1 |
154-2435 Mounting Gp-Fan
| 15***33 | Bolt | 31 |
| 15***35 | Seal-O-Ring | 1 |
| 15***38 | Bolt | 4 |
315-7813 Mounting Gp-Fan
| 14***08 | Kit-Bearing; (Rod) | 1 |
| 15***67 | Rod As-Connecting | 4 |
| 15***69 | Bushing | 1 |
311-2345 Pan Gp-Oil
| 15***67 | Rod As-Connecting | 4 |
| 15***69 | Bushing | 1 |
| 15***70 | Bolt | 2 |
316-6997 Pan Gp-Oil
| 16***68 | Bolt; (M10x1.5x95-mm) | 2 |
| 31***97 | Pan Group-Oil | 1 |
| 33***81 | Cover | 1 |
217-1480 Piston & Rod Gp
| 15***12 | Washer | 2 |
| 21***80 | Piston & Rod Group | 1 |
| 21***34 | Plug-Drain; (Engine Oil Pan) | 1 |
322-8401 Piston & Rod Gp
| 15***92 | Nut | 4 |
| 15***92 | Key-Woodruff | 1 |
| 15***94 | Gasket | 1 |
322-4924 Plate Gp-Cover -Blanking
| 15***92 | Key-Woodruff | 1 |
| 15***80 | Nut | 1 |
| 32***38 | Pulley-Crankshaft | 1 |
308-2300 Pulley Gp-Crankshaft
| 15***22 | Pulley-Water Pump | 1 |
| 30***00 | Pulley Group-Crankshaft, Pipe (Refg1) | 1 |
217-2777 Pulley Gp-Crankshaft
| 15***22 | Pulley-Water Pump | 1 |
| 21***77 | Pulley Group-Crankshaft | 1 |
| 25***89 | V-Belt; (Water Pump) | 1 |
308-2294 Pulley Gp-Water Pump
| 15***87 | Screw-Adjustment | 8 |
| 15***90 | Nut | 8 |
| 15***35 | Seal-O-Ring | 1 |
251-6791 Pulley Gp-Water Pump
| 21***72 | V-Belt; (Water Pump) | 1 |
| 25***91 | Pulley Group-Water Pump | 1 |
308-2306 V-Belt Gp -Fan Drive
| 15***61 | Bolt | 2 |
| 15***88 | Nut | 4 |
| 15***46 | Stud | 4 |
293-2167 Valve Mechanism Gp
| 11***45 | Connector | 1 |
| 15***79 | Stud-Hollow | 1 |
| 16***19 | Seal-O-Ring | 1 |
322-8397 Valve Mechanism Gp
| 15***33 | Seal; (Engine Oil Filler Cap) | 1 |
| 21***58 | Cap-Oil Filler; (Engine) | 1 |
| 28***93 | Seal; (Engine Oil Fill Cap) | 1 |
Cooling System
317-0980 Housing Gp-Water Regulator
| 12***64 | Clamp-Hose; (.76mm Id) | 1 |
| 15***60 | Nut | 5 |
| 15***61 | Bolt | 4 |
218-0934 Mounting Gp-Rad & Oil Cooler
| 15***60 | Nut | 3 |
| 15***61 | Bolt | 4 |
| 15***17 | Plug | 1 |
309-6721 Pump Gp-Water
| 12***64 | Clamp-Hose; (.76mm Id) | 1 |
| 14***35 | Clip-2 Piece | 1 |
| 14***36 | Clip-2 Piece | 1 |
217-7384 Pump Gp-Water
| 03***65 | Cap As-Radiator; (Sea Water Heat Exchanger) | 1 |
| 06***80 | Fitting | 1 |
| 20***27 | Fan As | 1 |
236-5375 Radiator & Hyd Oil Cooler Gp
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 2 |
| 23***75 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 24***71 | Air Cleaner Group | 1 |
218-0925 Radiator & Oil Cooler Mtg Gp
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
| 21***25 | Radiator & Oil Cooler Mtg Group | 1 |
| 23***67 | Filter Element As-Air; (Primary) | 1 |
Electrical And Starting System
3e-7584 Lamp Gp-Head & Signal -Rh
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***26 | Switch As-Rocker; (Rear Working Lamp) | 1 |
| 19***37 | Insert-Threaded; (M8x1.25-Thd) | 2 |
247-9912 Alternator Gp-Charging
| 19***29 | Clamp | 1 |
| 23***68 | Battery | 1 |
| 24***12 | Alternator Group-Charging | 1 |
316-6963 Alternator Gp-Charging
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 31***63 | Alternator Group-Charging | 1 |
225-7952 Battery Gp -Heavy-Duty
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***71 | Puller-Minifuse | 1 |
| 16***65 | Retainer | 2 |
225-7950 Battery Gp -Standard
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***90 | Panel Ar-Instrument; -Nacd | 1 |
| 22***50 | Battery Group; -Standard | 1 |
154-4233 Control Gp-Interlock
| 12***97 | Screw-Pan Head; (No 8-32x0.375-In) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***33 | Control Group-Interlock | 1 |
233-5670 Conversion Ar-Non-Roading -Nacd
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***55 | Control Group-Unprogrammed; -Machine Security System | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
216-4755 Cover Gp-Fuse Panel
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 4 |
| 19***07 | Screw-Truss Head; (M6x1x35-mm) | 4 |
225-8000 Electronics Gp-Implement -Work Tool
| 15***76 | Nut | 1 |
| 15***77 | Washer | 1 |
| 17***85 | Glow Plug | 4 |
207-5262 Electronics Gp-Machine -Security
| 15***76 | Nut | 1 |
| 15***77 | Washer | 1 |
| 17***85 | Glow Plug | 4 |
216-4750 Fastener Gp-Wiring Harness
| 13***17 | Cap As-Dust | 1 |
| 14***99 | Element As-Jacket Water Heater | 1 |
| 15***27 | Heater Group-Jacket Water | 1 |
192-0104 Glow Plug Gp
| 12***09 | Cord As-Heater Element; -240-Volt | 1 |
| 13***17 | Cap As-Dust | 1 |
| 15***94 | Element As-Jacket Water Heater | 11 |
316-6896 Glow Plug Gp
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
172-4445 Heater Gp-Jacket Water
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
172-4446 Heater Gp-Jacket Water
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***46 | Heater Group-Jacket Water | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
154-3927 Heater Gp-Jacket Water
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
154-3928 Heater Gp-Jacket Water
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
239-5010 Installation Gp-Security -Kit
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
225-7991 Installation Gp-Security -Machine Security System
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***11 | Lens As | 1 |
| 22***91 | Installation Group-Security; -Machine Security System | 1 |
233-5706 Kit-Work Tool Control & Wiring -Radial Lift
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 16***95 | Lens | 1 |
218-6741 Kit-Work Tool Wiring -Radial Lift
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***38 | Lens; (Rear) | 1 |
234-4328 Lamp Gp-Flood -Front
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***34 | Lamp Group-Stop & Tail; -Stop, Tail | 2 |
| 14***31 | Switch As-Rocker; (Hazard Warning Lights) | 1 |
234-7727 Lamp Gp-Flood -Rear
| 17***34 | Plug As; (Warning Beacon) | 1 |
| 23***27 | Lamp Group-Flood; -Rear | 1 |
| 9R***42 | Plug As | 1 |
340-7721 Lamp Gp-Stop & Tail -Rear Door
| 14***03 | Lamp Group-Stop & Tail; -12-Volt | 2 |
| 34***21 | Lamp Group-Stop & Tail; -Rear Door | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
142-7503 Lamp Gp-Stop & Tail
| 14***03 | Lamp Group-Stop & Tail; -12-Volt | 1 |
| 23***28 | Lamp Group-Flood; -Front, Rear, Wide Range | 2 |
| 5P***39 | Grommet | 2 |
142-8634 Lamp Gp-Stop & Tail
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
309-1325 Lamp Gp-Warning Beacon -Amber
| 15***12 | Washer | 1 |
| 30***25 | Lamp Group-Warning Beacon; -12-Volt, Amber | 1 |
| 32***29 | Lever-Throttle | 1 |
128-6985 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 2 |
| 14***27 | Switch As-Rocker; (Warning Beacon) | 1 |
216-4746 Lighting Gp-Flood -Rear
| 21***46 | Lighting Group-Flood; -Rear | 1 |
| 24***70 | Bushing | 1 |
| 24***71 | Solenoid; (Starting Motor) | 1 |
218-6425 Lighting Gp-Flood -Front
| 15***99 | Washer | 2 |
| 15***03 | Washer | 2 |
| 16***61 | Starting Motor Group-Electric | 1 |
216-4715 Lighting Gp-Roading
| 21***15 | Lighting Group-Roading | 1 |
| 32***14 | Starter-Motor | 1 |
142-8652 Lighting Gp-Stop & Tail
| 14***83 | Bolt; (M10x1.5x45-mm)(Starter Motor) | 2 |
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 33***03 | Kit-Terminal | 1 |
142-8653 Lighting Gp-Warning Beacon
| 14***53 | Lighting Group-Warning Beacon; -12-Volt | 1 |
| 15***36 | Washer | 2 |
| 29***65 | Switch-Pressure; (Engine Oil) | 1 |
322-4928 Solenoid Gp-Shutoff
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 32***28 | Solenoid Group-Shutoff | 1 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
163-3361 Starting Motor Gp-Electric
| 15***36 | Washer | 2 |
| 16***61 | Starting Motor Group-Electric | 1 |
| 18***65 | Plug | 1 |
322-4917 Starting Motor Gp-Electric
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***39 | Alarm As | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
307-8201 Starting Motor Gp-Electric
| 30***01 | Nut, Hex, Tappet Top Stop Lock Nut, Starting Motor Group-Electric | 1 |
| 34***00 | Switch-Temperature; (Coolant) | 1 |
333-5930 Starting Motor Gp-Electric
| 09***34 | Spacer; (9x20x10-mm Thk) | 3 |
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
339-2900 Starting Motor Gp-Electric
| 09***34 | Spacer; (9x20x10-mm Thk) | 3 |
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
247-0323 Switch Gp-Press & Temp
| 09***34 | Spacer; (9x20x10-mm Thk) | 3 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
184-1564 Switch Gp-Pressure -Brake Light
| 09***34 | Spacer; (9x20x10-mm Thk) | 3 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
316-6890 Switch Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 12***68 | Socket-Connector; (14-Ga) | 2 |
308-2317 Switch Gp-Temperature -Coolant
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
225-7969 Warning Gp-Backup
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
225-8001 Wiring Gp-Chassis
| 14***23 | Housing-Axle | 1 |
| 14***24 | Spindle-Wheel | 1 |
| 14***29 | Spacer; (50.8x63.5x32-mm Thk) | 1 |
309-6855 Wiring Gp-Chassis
| 14***58 | Axle Group | 4 |
| 30***55 | Wiring Group-Chassis | 1 |
225-8010 Wiring Gp-Engine
| 14***15 | Connector As | 1 |
| 14***28 | Connector Assem. | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
230-3743 Wiring Gp-Horn -With Mounting
| 14***41 | Hose As | 2 |
| 14***22 | Adapter; (-10orb/-12orfs) | 4 |
| 14***27 | Connector Group | 4 |
225-7964 Wiring Gp-Rear Lighting
| 10***93 | Poppet | 1 |
| 14***18 | Connector As | 1 |
| 14***27 | Connector Group | 2 |
225-7960 Wiring Gp-Work Tool -Radial Lift
| 20***43 | Bolt; (M12x1.75x42.5-mm) | 20 |
| 22***60 | Wiring Group-Work Tool; -Radial Lift | 1 |
| 28***54 | Motor Group-Piston; -Hydrostatic | 2 |
Engine Arrangement
295-7122 Engine Ar
| 29***22 | Engine Ar | 1 |
| 30***05 | Engine Ar-Primary | 1 |
295-7022 Engine Ar
| 29***18 | Engine Ar-Primary | 1 |
| 29***22 | Engine Ar | 1 |
300-5205 Engine Ar-Primary
| 15***77 | Lifting Group-Engine | 1 |
| 15***35 | Mounting Group-Fan | 1 |
| 16***68 | Manifold Group-Exhaust | 1 |
292-5718 Engine Ar-Primary
| 29***18 | Engine Ar-Primary | 1 |
| 30***91 | Flywheel Group | 1 |
| 30***94 | Pulley Group-Water Pump, Pipe (Rlb1) | 1 |
278-1218 Installation Ar-Engine
| 21***25 | Radiator & Oil Cooler Mtg Group | 1 |
| 21***34 | Mounting Group-Rad & Oil Cooler | 1 |
| 21***44 | Lines Group-Air | 1 |
Frame And Body
218-5650 Bumper Gp -Rear
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
233-5672 Conversion Ar-Roading -Germany
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
| 12***55 | Fastener-Hook; (18-cm Each) | 0 |
257-5727 Conversion Ar-Roading -Italy
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***10 | Plate As | 1 |
| 14***23 | Gasket | 2 |
257-5718 Conversion Ar-Roading -United Kingdom, Cosa
| 18***23 | Block; (Lh)(Counterweight)(33.70 Kg) | 1 |
| 18***24 | Block; (Rh)(Counterweight)(33.70 Kg) | 1 |
| 18***31 | Block; (16.90 Kg) | 2 |
233-5674 Conversion Ar-Roading -Outside Nacd
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
| 12***55 | Fastener-Hook; (18-cm Each) | 0 |
233-5673 Conversion Ar-Roading -Italy
| 11***34 | Film-Warning; (Steering) | 1 |
| 17***15 | Bracket As | 1 |
| 17***16 | Chock | 1 |
257-5726 Conversion Ar-Roading -Germany
| 11***85 | Bumper | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 3 |
| 14***01 | Hood As | 1 |
233-5671 Conversion Ar-Roading -Outside Nacd
| 11***34 | Film-Warning; (Steering) | 1 |
| 15***42 | Plate-Information; (Maximum Weight) | 1 |
| 16***89 | Tack-Fastener | 4 |
257-5716 Conversion Ar-Roading -Germany, Italy
| 18***23 | Block; (Lh)(Counterweight)(33.70 Kg) | 1 |
| 18***24 | Block; (Rh)(Counterweight)(33.70 Kg) | 1 |
| 18***31 | Block; (16.90 Kg) | 2 |
278-1292 Conversion Gp-Roading -Germany
| 12***43 | Seal; (70-cm) | 0 |
| 27***92 | Conversion Group-Roading; -Germany | 1 |
| 29***85 | Grill As | 1 |
278-1293 Conversion Gp-Roading -Italy
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
234-0793 Conversion Gp-Roading -Italy
| 22***15 | Plate As | 1 |
| 23***93 | Conversion Group-Roading; -Italy | 1 |
| 24***77 | Bolt; (M8x1.25x12-mm) | 1 |
234-0792 Conversion Gp-Roading -Germany
| 15***56 | Bearing-Sleeve | 2 |
| 21***96 | Plate As; (Rh) | 1 |
| 21***98 | Arm As-Lift | 1 |
183-7122 Counterweight Gp
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
185-9940 Counterweight Gp -Kit
| 11***34 | Film-Warning; (Steering) | 1 |
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 16***62 | Plate As | 1 |
218-5803 Enclosure Gp-Engine
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
295-7075 Frame Gp-Loader
| 14***26 | Plate-Lift | 4 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 21***11 | Plate As | 1 |
295-7026 Frame Gp-Machine
| 09***25 | Pin-Clevis | 1 |
| 15***54 | Bracket As-Lift | 1 |
| 15***56 | Plate | 4 |
156-9809 Guide Gp-Lines -Auxiliary Hydraulic
| 13***66 | Mirror Group-Rear View | 2 |
| 14***71 | Clamp; (Top)(Top) | 1 |
| 14***72 | Clamp; (Bottom)(Bottom) | 1 |
290-9911 Kit-Engine Enclosure Seal -Debris Barrier
| 17***36 | Plate | 1 |
| 19***62 | Lamp Group-Registration Plate | 1 |
| 20***65 | Plate | 1 |
340-7722 Kit-Roading Conversion -Italy, Lights, Switches
| 17***79 | Insulation | 2 |
| 23***88 | Insulation | 1 |
| 24***48 | Insulation | 1 |
277-0650 Kit-Roading Conversion -Lights, Mirrors
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
340-7725 Kit-Roading Conversion -Italy, Lights, Mirrors
| 34***25 | Kit-Roading Conversion; -Italy, Lights, Mirrors | 1 |
257-5730 Kit-Roading Conversion -Outside Nacd
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
340-7724 Kit-Roading Conversion -Germany
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
| 19***31 | Elbow; (45-Deg) | 1 |
| 19***32 | Elbow As | 1 |
218-6708 Lifting Gp-Machine
| 17***02 | Adapter Assem. | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 21***08 | Lifting Group-Machine | 1 |
218-6709 Lifting Gp-Machine
| 06***43 | Ring-Snap | 1 |
| 21***55 | Pin As | 1 |
| 21***43 | Bushing | 1 |
238-7671 Mirror & Mtg Gp-Rear View -With Roading Light Mount
| 23***66 | Pin As | 6 |
| 23***99 | Spacer; (25.4x28.4x13-mm Thk) | 12 |
| 23***71 | Mirror & Mtg Group-Rear View; -With Roading Light Mount | 1 |
173-3021 Mounting Gp-Registration -With Wiring & Lights
| 14***89 | Support-Loader | 1 |
| 14***90 | Pin As | 4 |
| 14***91 | Pin As | 2 |
225-7963 Mounting Gp-Registration
| 22***63 | Mounting Group-Registration | 1 |
| 26***41 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
175-4228 Mounting Gp-Roading Lights -Rear
| 17***85 | Kit-Seal | 1 |
| 17***28 | Mounting Group-Roading Lights; -Rear | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
233-5616 Suppression Gp-Sound
| 23***16 | Suppression Group-Sound | 1 |
| 25***97 | Bearing-Sleeve | 1 |
| 28***91 | Kit-Seal | 1 |
Fuel System
218-5566 Cable Gp-Governor Control
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
218-5602 Control Gp-Governor
| 13***11 | Cap; (Tamper Resistant) | 1 |
| 15***60 | Nut | 1 |
| 15***83 | Pin | 1 |
144-9962 Filter Gp-Water Sep & Fuel
| 14***28 | Cap As-Filler; (Fuel) | 1 |
| 14***28 | Elbow | 1 |
| 14***62 | Filter Group-Water Sep & Fuel | 1 |
322-7957 Governor Gp
| 15***73 | Bolt | 2 |
| 29***70 | Pump As-Fuel Transfer | 1 |
| 32***57 | Governor Group | 1 |
231-5129 Governor Gp
| 14***28 | Elbow | 1 |
| 17***54 | Pump Group-Fuel Prm & Prim Filter; -Water Separator | 1 |
| 18***07 | Clamp-Hose | 1 |
228-1781 Lines Gp-Fuel Prm & Filter
| 10***79 | Bolt; (M8x1.25x20-mm) | 2 |
| 15***92 | Nut | 3 |
| 15***60 | Nut | 3 |
176-7711 Pump & Mtg Gp-Fuel Transfer
| 17***11 | Pump & Mtg Group-Fuel Transfer | 1 |
| 20***26 | Bolt-Special; (Banjo) | 1 |
| 20***27 | Washer | 2 |
315-7814 Pump & Mtg Gp-Fuel Transfer
| 10***79 | Bolt; (M8x1.25x20-mm) | 2 |
| 15***92 | Nut | 3 |
| 15***60 | Nut | 3 |
302-7821 Pump Gp-Fuel Injection
| 10***51 | Bolt; (M8x1.25x130-mm) | 1 |
| 15***75 | Bolt | 5 |
| 15***84 | Washer | 2 |
311-1683 Pump Gp-Fuel Injection
| 10***51 | Bolt; (M8x1.25x130-mm) | 1 |
| 15***92 | Nut | 1 |
| 15***84 | Washer | 1 |
295-8181 Pump Gp-Fuel Injection
| 12***59 | Pump Group-Fuel Priming | 1 |
| 12***62 | Bladder | 1 |
| 14***62 | Filter Group-Water Sep & Fuel | 1 |
176-9954 Pump Gp-Fuel Prm & Prim Filter -Water Separator
| 15***56 | Battery; (12-Volt, Maintenance Free)(24 V) | 1 |
| 17***54 | Pump Group-Fuel Prm & Prim Filter; -Water Separator | 1 |
| 19***29 | Clamp | 1 |
Hydraulic System
193-0447 Accumulator & Mtg Gp-Hydraulic
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 25***97 | Bearing-Sleeve | 1 |
| 25***42 | Bearing-Sleeve | 1 |
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 17***58 | Kit-Seal | 1 |
| 21***55 | Rod End As | 1 |
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
149-0686 Accumulator Gp-Hydraulic -Charged
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
179-7001 Adapter Gp-Oil Line -Pilot Oil Lines
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 17***01 | Adapter Group-Oil Line; -Unit Injector Pump | 1 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
230-5406 Cylinder & Mtg Gp-Angle Blade
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 23***06 | Cylinder & Mtg Group-Angle Blade | 1 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
231-5274 Cylinder & Mtg Gp-Angle Blade
| 23***74 | Cylinder & Mtg Group-Angle Blade | 1 |
| 25***97 | Bearing-Sleeve | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
218-6799 Cylinder & Mtg Gp-Lift Arm
| 21***99 | Cylinder & Mtg Group-Lift Arm | 1 |
| 21***25 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
293-6264 Cylinder Gp-Bucket
| 21***25 | Kit-Seal | 1 |
| 29***64 | Cylinder Group-Bucket | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
164-9295 Cylinder Gp-Grapple
| 16***95 | Cylinder Group-Grapple | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
278-1975 Cylinder Gp-Grapple -Industrial
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***16 | Switch Group-Rocker; -Work Tool Positioner | 1 |
| 15***53 | Manifold & Mtg Group-Control; -Work Tool Positioner | 1 |
255-0943 Cylinder Gp-Grapple
| 21***19 | Lines Group-Tilt Cylinder; -Without Work Tool Positioner | 1 |
| 21***07 | Lines Group-Lift Cylinder | 1 |
| 25***43 | Cylinder Group-Grapple | 1 |
278-1969 Cylinder Gp-Hydraulic
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
192-2640 Cylinder Gp-Hydraulic -Coupler
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***78 | Lines Group-Pilot; -Direction, Speed | 1 |
274-9931 Cylinder Gp-Hydraulic -Angle Blade
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 26***04 | Bracket | 1 |
| 27***16 | Bracket | 1 |
225-9521 Cylinder Gp-Hydraulic -Angle Blade
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***78 | Lines Group-Pilot; -Direction, Speed | 1 |
| 21***89 | Lines Group-Hydrostatic | 1 |
274-9930 Cylinder Gp-Hydraulic -Angle Blade
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***78 | Lines Group-Pilot; -Direction, Speed | 1 |
| 21***89 | Lines Group-Hydrostatic | 1 |
293-5706 Cylinder Gp-Lift -Lh
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
230-3683 Cylinder Gp-Lift -Lh
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
230-3693 Cylinder Gp-Lift -Rh
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
293-5705 Cylinder Gp-Lift -Rh
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
293-5708 Cylinder Gp-Tilt
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
230-3694 Cylinder Gp-Tilt -Rh
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
293-5707 Cylinder Gp-Tilt -Rh
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
230-3684 Cylinder Gp-Tilt -Lh
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
9u-6995 Fitting Gp-Hydraulic
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
295-7266 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
327-5766 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
218-6180 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
295-7056 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
218-6181 Hydraulic Ar
| 14***15 | Connector As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 6 |
| 14***42 | Connector Group | 2 |
306-8888 Kit-Lowering Control Lines -Manual
| 14***15 | Connector As | 1 |
| 14***16 | Connector Group | 1 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
218-6757 Kit-Quick Coupler Conversion -Hydraulic
| 10***15 | Elbow Group | 2 |
| 12***52 | Spacer; (10.5x20x28-mm Thk) | 1 |
| 17***20 | Strap-Dual Clamp | 2 |
279-5412 Lines Gp-Bucket -Industrial
| 14***16 | Connector Group | 2 |
| 14***25 | Connector As. | 5 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 2 |
279-5414 Lines Gp-Bucket -Multipurpose
| 14***15 | Connector As | 1 |
| 14***60 | Elbow Group | 1 |
| 15***40 | Hose; (30cm) | 1 |
279-5413 Lines Gp-Bucket -Multipurpose
| 12***50 | Valve-Check; (Quick Coupler Solenoid) | 1 |
| 14***25 | Connector As. | 9 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
285-6113 Lines Gp-Bucket -Utility
| 10***29 | Stud; (M10x1.5-Thd) | 2 |
| 10***03 | Plate-Cover | 2 |
| 11***83 | Connector | 1 |
279-5415 Lines Gp-Bucket -Multipurpose
| 11***15 | Plate-Cover | 2 |
| 14***98 | Clip | 2 |
| 14***34 | Hose As | 4 |
293-0140 Lines Gp-Bucket -Multipurpose
| 10***03 | Plate-Cover | 2 |
| 19***34 | Fitting As; (Quick Disconnect, Male) | 1 |
| 19***35 | Fitting As; (Quick Disconnect, Female) | 1 |
154-5052 Lines Gp-Bucket
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 15***52 | Lines Group-Bucket; -Multipurpose | 1 |
154-5051 Lines Gp-Bucket
| 14***97 | Block | 2 |
| 14***41 | Connector Group | 2 |
| 15***51 | Lines Group-Bucket | 1 |
154-5019 Lines Gp-Bucket
| 14***97 | Block | 2 |
| 14***15 | Connector As | 2 |
| 14***41 | Connector Group | 2 |
279-5416 Lines Gp-Bucket -Multipurpose
| 11***15 | Plate-Cover | 2 |
| 14***98 | Clip | 2 |
| 14***34 | Hose As | 4 |
231-5273 Lines Gp-Connecting
| 10***30 | Hose Assem. | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
177-1986 Lines Gp-Connecting
| 10***30 | Hose Assem. | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
165-8733 Lines Gp-Grapple
| 16***33 | Lines Group-Grapple | 1 |
| 23***79 | Cover | 1 |
| 25***11 | Manifold Group-Control; -Angling Blade | 1 |
161-0187 Lines Gp-Grapple
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
| 22***18 | Manifold & Solenoid Group-Control; -Work Tool Positioner | 1 |
| 7X***35 | Bolt; (M6x1x60-mm) | 2 |
286-9279 Lines Gp-Grapple
| 25***94 | Valve Group-Solenoid; -Parking Brake | 1 |
| 25***95 | Manifold | 1 |
| 28***79 | Lines Group-Grapple | 1 |
286-9250 Lines Gp-Grapple
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***79 | Kit-Seal; (Relief Valve, Conveyor Cont) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
218-6059 Lines Gp-Hydraulic Fan -Without A/C
| 21***59 | Lines Group-Hydraulic Fan; -Without A/C | 1 |
| 25***94 | Valve Group-Solenoid; -Parking Brake | 1 |
218-6143 Lines Gp-Hydraulic Oil Cooler
| 10***08 | Kit-Seal; (Solenoid Valve, Quick Steer) | 1 |
| 21***43 | Lines Group-Hydraulic Oil Cooler | 1 |
| 23***26 | Coil As | 2 |
218-5851 Lines Gp-Lift Cylinder
| 18***51 | Washer-Hard; (5.3x8.8x2-mm Thk) | 8 |
| 19***08 | Seal-O-Ring | 1 |
| 21***14 | Seal-O-Ring | 1 |
218-6207 Lines Gp-Lift Cylinder
| 21***07 | Lines Group-Lift Cylinder | 1 |
| 28***74 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
218-6211 Lines Gp-Lowering Control -Manual
| 21***11 | Lines Group-Lowering Control; -Manual | 1 |
| 30***36 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
218-6099 Lines Gp-Pilot -Work Tool
| 21***77 | Seal-O-Ring | 1 |
| 21***99 | Lines Group-Pilot; -Work Tool | 1 |
| 22***40 | Valve Group-Relief; (Gear Motor) | 1 |
218-5978 Lines Gp-Pilot -Direction, Speed
| 21***77 | Seal-O-Ring | 1 |
| 21***78 | Lines Group-Pilot; -Direction, Speed | 1 |
| 22***40 | Valve Group-Relief; (Gear Motor) | 1 |
218-6132 Lines Gp-Pump
| 15***12 | Pin | 2 |
| 15***13 | Pin | 2 |
| 21***32 | Lines Group-Pump | 1 |
218-5852 Lines Gp-Tilt Cylinder
| 15***13 | Pin | 2 |
| 21***52 | Lines Group-Tilt Cylinder; -Work Tool Positioner | 1 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
218-5819 Lines Gp-Tilt Cylinder -Without Work Tool Positioner
| 15***13 | Plate | 1 |
| 15***41 | Pin | 2 |
| 15***42 | Pin | 2 |
327-5937 Lines Gp-Work Tool
| 26***27 | Pump Group-Gear; -Work Tool | 1 |
| 32***37 | Lines Group-Work Tool | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
327-5767 Lines Gp-Work Tool
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
| 32***67 | Lines Group-Work Tool | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
218-6197 Lines Gp-Work Tool
| 15***41 | Pin | 2 |
| 15***42 | Pin | 2 |
| 21***97 | Lines Group-Work Tool | 1 |
218-6235 Manifold & Lines Gp-Control -Parking Brake
| 21***35 | Manifold & Lines Group-Control; -Parking Brake | 1 |
| 26***62 | Pump Group-Gear | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
159-5753 Manifold & Mtg Gp-Control -Work Tool Positioner
| 15***53 | Manifold & Mtg Group-Control; -Work Tool Positioner | 1 |
| 30***50 | Pipe, Pump Group-Gear | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
231-5278 Manifold & Mtg Gp-Control -Angling Blade
| 23***57 | Seal-Shaft | 2 |
| 23***78 | Manifold & Mtg Group-Control; -Angling Blade | 1 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
233-7131 Manifold & Solenoid Gp-Control -Parking Brake
| 23***57 | Seal-Shaft | 2 |
| 23***31 | Manifold & Solenoid Group-Control; -Parking Brake | 1 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
224-9418 Manifold & Solenoid Gp-Control -Work Tool Positioner
| 09***94 | Ring-Retaining | 1 |
| 22***18 | Manifold & Solenoid Group-Control; -Work Tool Positioner | 1 |
| 23***26 | Seal-Shaft | 1 |
248-1268 Manifold & Solenoid Gp-Control -Parking Brake
| 23***57 | Seal-Shaft | 2 |
| 24***68 | Manifold & Solenoid Group-Control; -Parking Brake | 1 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
258-9011 Manifold Gp-Control -Angling Blade
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***56 | Seal-O-Ring | 1 |
233-7128 Manifold Gp-Control -Quick Coupler
| 15***14 | Bracket | 1 |
| 20***91 | Tank Group-Hydraulic | 1 |
| 20***29 | Breather; (Inline)(Breather)(Hydraulic Oil) | 1 |
295-7267 Motor & Mtg Gp-Hydraulic Fan
| 21***67 | Valve Group-Control; -Work Tool | 1 |
| 21***61 | Bracket | 1 |
| 29***67 | Motor & Mtg Group-Hydraulic Fan | 1 |
218-6758 Motor & Mtg Gp-Hydraulic Fan
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 14***25 | Connector As. | 4 |
289-6374 Motor Gp-Gear -Hydraulic Fan
| 00***82 | Spring | 3 |
| 12***16 | Bolt-Shoulder | 1 |
| 14***31 | Valve-Check | 3 |
307-3036 Motor Gp-Gear -Hydraulic Fan
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 20***71 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
| 20***73 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
286-9248 Mounting Gp-Cylinder -Grapple Bucket
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 16***78 | Kit-Pilot Valve; (Spring)(Pilot Valve Lift & Dump) | 1 |
| 17***70 | Coil As | 1 |
165-8731 Mounting Gp-Cylinder -Utility
| 15***65 | Kit-Seal; (Pilot Valve) | 1 |
| 16***78 | Kit-Pilot Valve; (Spring)(Pilot Valve Lift & Dump) | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
156-0891 Mounting Gp-Cylinder -Industrial
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***78 | Kit-Pilot Valve; (Spring)(Pilot Valve Lift & Dump) | 1 |
154-5011 Mounting Gp-Cylinder
| 12***04 | Plate | 1 |
| 15***65 | Kit-Seal; (Pilot Valve) | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
142-8714 Plug Gp-Pilot Valve
| 13***76 | Seal-O-Ring | 1 |
| 14***14 | Plug Group-Pilot Valve | 1 |
295-7268 Pump & Mtg Gp-Work Tool
| 21***44 | Bracket As | 1 |
| 29***68 | Pump & Mtg Group-Work Tool | 1 |
218-6175 Pump & Mtg Gp-Work Tool -Standard Flow
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
| 21***75 | Pump & Mtg Group-Work Tool; -Standard Flow | 1 |
261-6094 Pump & Mtg Gp-Work Tool
| 23***26 | Coil As | 1 |
| 26***94 | Pump & Mtg Group-Work Tool | 1 |
269-9427 Pump Gp-Gear -Work Tool
| 13***86 | Edge Group-Cutting | 1 |
| 17***81 | Blade Group-Angling | 1 |
| 17***83 | Spring Group-Blade | 1 |
307-3050 Pump Gp-Gear
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
269-9462 Pump Gp-Gear
| 14***41 | Edge Group-Cutting | 1 |
| 17***82 | Blade Group-Angling | 1 |
| 17***83 | Spring Group-Blade | 1 |
236-5106 Pump Gp-Gear -Work Tool
| 15***62 | Film-Information; (Tie-Down Location) | 2 |
| 18***33 | Step Group-Material Handling Arm | 1 |
| 21***50 | Arm As | 1 |
233-5980 Tank & Mtg Gp-Hydraulic
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
204-1491 Tank Gp-Hydraulic
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
| 16***68 | Film-Warning; (No Clearance, Stay Back) | 2 |
218-6240 Valve & Lines Gp-Coupler
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
| 16***68 | Film-Warning; (No Clearance, Stay Back) | 2 |
218-6781 Valve & Mtg Gp-Control
| 16***89 | Tack-Fastener | 4 |
| 21***81 | Valve & Mtg Group-Control | 1 |
| 22***12 | Blade As-Angling | 1 |
336-1317 Valve Gp-Control
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
216-6167 Valve Gp-Control -Work Tool
| 15***77 | Edge | 1 |
| 21***67 | Valve Group-Control; -Work Tool | 1 |
112-1817 Valve Gp-Manual -Lowering Control
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
218-6119 Valve Gp-Pilot -Direction, Speed
| 15***37 | Edge | 1 |
| 21***19 | Valve Group-Pilot; -Direction, Speed | 1 |
343-0868 Valve Gp-Pilot -Direction, Speed
| 19***16 | Edge | 1 |
| 34***68 | Valve Group-Pilot; -Direction, Speed | 1 |
299-9119 Valve Gp-Pilot -Work Tool
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***06 | Blade Group-Multipurpose Bucket | 1 |
228-9228 Valve Gp-Pilot -Work Tool
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 22***28 | Valve Group-Pilot; -Work Tool | 1 |
299-9116 Valve Gp-Pilot -Direction, Speed
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***95 | Blade Group-Multipurpose Bucket | 1 |
298-1309 Valve Gp-Relief -Main
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 29***43 | Blade As | 1 |
185-4254 Valve Gp-Solenoid
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***54 | Valve Group-Solenoid; -Auxiliary | 1 |
259-8194 Valve Gp-Solenoid -Parking Brake
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***94 | Valve Group-Solenoid; -Parking Brake | 1 |
195-9700 Valve Gp-Solenoid -12-Volt
| 15***37 | Edge | 1 |
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 1 |
| 32***34 | Guard As; (60-In) | 1 |
Implements
222-5695 Bracket Gp-Support
| 15***59 | Edge | 1 |
| 22***95 | Bracket Group-Support | 1 |
| 32***44 | Guard As; (66-In) | 1 |
Lubrication System
316-6975 Base Gp-Oil Filter
| 22***23 | Filter As-Engine Oil | 1 |
| 31***75 | Base Group-Oil Filter | 1 |
308-2297 Filler Gp-Engine Oil
| 10***02 | Clip; (Ladder) | 1 |
| 11***27 | Fitting; (Quick Disconnect, Male) | 1 |
| 11***68 | Nut-Bulkhead; (1-7/8-12-Thd) | 1 |
308-2298 Filter Gp-Engine Oil
| 15***36 | Washer | 2 |
| 15***49 | Spring | 1 |
| 15***50 | Collar | 1 |
323-8458 Kit-High Speed Oil Change
| 15***28 | Gasket-Cover; (Water Temperature Regulator) | 1 |
| 16***01 | Bolt | 2 |
| 21***79 | Housing | 1 |
322-8399 Pump Gp-Engine Oil
| 14***12 | Support As | 1 |
| 14***32 | Pin As | 1 |
| 16***47 | Latch As | 1 |
Machine Arrangement
295-7110 Chassis Ar
| 15***09 | Guide Group-Lines; -Auxiliary Hydraulic | 1 |
| 21***02 | Control Group-Governor | 1 |
| 21***50 | Bumper Group; -Rear | 1 |
327-5765 Chassis Ar
| 21***02 | Control Group-Governor | 1 |
| 21***50 | Bumper Group; -Rear | 1 |
| 21***03 | Enclosure Group-Engine | 1 |
295-7217 Common Ar
| 21***46 | Lighting Group-Flood; -Rear | 1 |
| 21***00 | Power Train Ar | 1 |
| 22***69 | Warning Group-Backup | 1 |
295-7216 Common Ar
| 21***46 | Lighting Group-Flood; -Rear | 1 |
| 21***01 | Floor Mat | 1 |
| 21***50 | Cab Ar-Enclosed Rops | 1 |
327-5762 Configuration Ar
| 21***01 | Floor Mat | 1 |
| 21***50 | Cab Ar-Enclosed Rops | 1 |
| 29***10 | Chassis Ar | 1 |
295-7493 Control Ar-Machine -Aux Proportional Flow
| 21***18 | Control Group-Pilot Operated Hydraulic; -Work Tool | 1 |
| 21***32 | Control Group-Pilot Operated Hydraulic; -Hydrostatic | 1 |
| 29***93 | Control Ar-Machine; -Auxiliary Proportional Flow | 1 |
342-5001 Control Ar-Machine -Aux Proportional Flow
| 21***18 | Control Group-Pilot Operated Hydraulic; -Work Tool | 1 |
| 21***33 | Control Group-Pilot Operated Hydraulic | 1 |
| 34***01 | Control Ar-Machine; -Auxiliary Proportional Flow | 1 |
295-7491 Control Ar-Machine -On, Off Auxiliary Control
| 21***11 | Control Group-Pilot Operated Hydraulic; -Work Tool | 1 |
| 21***31 | Control Group-Pilot Operated Hydraulic; -Hydrostatic | 1 |
| 29***91 | Control Ar-Machine; -On, Off Auxiliary Control | 1 |
295-7037 Conversion Ar-Machine -Germany, Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***15 | Lighting Group-Roading | 1 |
295-7287 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***46 | Box Group-Storage | 1 |
| 21***91 | Panel Ar-Instrument; -Eame | 1 |
295-7161 Conversion Ar-Machine -Germany
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
278-5347 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 19***84 | Film Group; -Clearance | 1 |
| 21***46 | Box Group-Storage | 1 |
295-7290 Conversion Ar-Machine -Germany
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
295-7289 Conversion Ar-Machine -Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***15 | Lighting Group-Roading | 1 |
278-5413 Conversion Ar-Machine -Germany
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
340-7714 Conversion Ar-Machine -Outside Nacd
| 21***46 | Box Group-Storage | 1 |
| 21***91 | Panel Ar-Instrument; -Eame | 1 |
| 21***08 | Lifting Group-Machine | 1 |
295-7148 Conversion Ar-Machine -Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***15 | Lighting Group-Roading | 1 |
295-7288 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 19***84 | Film Group; -Clearance | 1 |
| 21***46 | Box Group-Storage | 1 |
295-7286 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***46 | Box Group-Storage | 1 |
| 21***91 | Panel Ar-Instrument; -Eame | 1 |
278-5369 Conversion Ar-Machine -Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***15 | Lighting Group-Roading | 1 |
252-0449 Conversion Ar-Machine -Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***90 | Panel Ar-Instrument; -Nacd | 1 |
| 21***75 | Pump & Mtg Group-Work Tool; -Standard Flow | 1 |
295-7048 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***46 | Box Group-Storage | 1 |
| 21***91 | Panel Ar-Instrument; -Eame | 1 |
295-7058 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***46 | Box Group-Storage | 1 |
| 21***91 | Panel Ar-Instrument; -Eame | 1 |
295-7065 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 19***84 | Film Group; -Clearance | 1 |
| 21***46 | Box Group-Storage | 1 |
295-7285 Conversion Ar-Machine -Germany, Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***15 | Lighting Group-Roading | 1 |
261-6155 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***46 | Box Group-Storage | 1 |
| 21***01 | Floor Mat | 1 |
327-5763 Machine Ar-Special
| 32***63 | Machine Ar-Special | 1 |
| 32***64 | Cab Ar-Enclosed Rops | 1 |
| 32***65 | Chassis Ar | 1 |
Operator Station
320-1389 Arm Gp-Window Wiper
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 9 |
| 23***06 | Gasket | 1 |
236-4830 Armrest & Mounting Gp
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 23***30 | Armrest & Mounting Group | 1 |
236-4833 Armrest Gp
| 15***78 | Mount As | 2 |
| 15***81 | Mount | 2 |
| 15***90 | Bracket | 1 |
218-6420 Box Gp-Storage -Literature
| 14***05 | Seat Group; -Suspension | 1 |
| 21***71 | Installation Group-Cover & Lines; -Without Heater Or A/C | 1 |
| 21***00 | Handhold Group | 1 |
216-6146 Box Gp-Storage
| 21***46 | Box Group-Storage | 1 |
| 21***62 | Seat Group; -Static | 1 |
| 21***71 | Installation Group-Cover & Lines; -Without Heater Or A/C | 1 |
327-5764 Cab Ar-Enclosed Rops
| 22***98 | Panel Group-Instrument; -Nacd | 1 |
| 32***64 | Cab Ar-Enclosed Rops | 1 |
218-6350 Cab Ar-Enclosed Rops
| 14***05 | Seat Group; -Suspension | 1 |
| 21***72 | Heater Ar-Cab | 1 |
| 21***50 | Cab Ar-Enclosed Rops | 1 |
218-6367 Cab Gp-Enclosed Rops
| 21***51 | Panel Group-Instrument; -Eame | 1 |
| 21***67 | Cab Group-Enclosed Rops | 1 |
322-5614 Cab Gp-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 57 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
327-5935 Cab Gp-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 44 |
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 3 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
276-0074 Cable Gp-Control
| 13***43 | Bolt-Round Head; (M6x1-6g-Thd) | 5 |
| 19***85 | Plate; (Rh) | 1 |
| 21***23 | Plate; (Lh) | 1 |
298-7198 Cable Gp-Control -Manual Lowering
| 21***66 | Cable Group-Governor Control | 1 |
| 23***74 | Lever Group-Governor | 1 |
| 26***88 | Pedal Group-Governor | 1 |
231-4257 Control Gp-Handle -Rh
| 19***54 | Sleeve | 1 |
| 23***57 | Control Group-Handle; -Rh | 1 |
218-6485 Control Gp-Handle -Direction, Speed
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 12***43 | Seal; (70-cm) | 0 |
| 21***16 | Plate As | 1 |
231-4258 Control Gp-Handle -Lh
| 12***37 | Seal | 0 |
| 18***11 | Plate As | 1 |
| 18***12 | Plate | 1 |
218-6480 Control Gp-Handle -Direction, Speed
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***54 | Kit-Service; (Pedal) | 1 |
231-4256 Control Gp-Handle -Lh
| 19***54 | Sleeve | 1 |
| 23***56 | Control Group-Handle; -Lh | 1 |
231-4260 Control Gp-Handle -Rh
| 0T***44 | Bolt (1.25" Long) | 2 |
| 23***60 | Control Group-Handle; -Rh | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
218-6490 Control Gp-Handle -Work Tool
| 19***54 | Sleeve | 1 |
| 21***90 | Control Group-Handle; -Work Tool | 1 |
342-5018 Control Gp-Pilot Operated Hyd -Work Tool
| 16***00 | Film-Warning; (Clearance) | 1 |
| 34***18 | Control Group-Pilot Operated Hydraulic; -Work Tool | 1 |
218-5611 Control Gp-Pilot Operated Hyd
| 0T***44 | Bolt (1.25" Long) | 2 |
| 21***11 | Control Group-Pilot Operated Hydraulic; -Work Tool | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
218-5618 Control Gp-Pilot Operated Hyd
| 15***85 | Wire As | 1 |
| 15***86 | Switch As; (Seat) | 1 |
| 15***11 | Kit-Spring; (Adjustable Seat) | 1 |
343-5542 Control Gp-Pilot Operated Hyd
| 25***15 | Film-Identification; (Un)(Front) | 1 |
| 25***16 | Film-Identification; (Un)(Side) | 2 |
| 25***17 | Film-Identification; (Un)(Rear) | 2 |
343-5543 Control Gp-Pilot Operated Hyd
| 25***23 | Film-Identification; (Caterpillar) | 1 |
| 25***24 | Film-Identification; (Cat, Lh) | 1 |
| 25***25 | Film-Identification; (Cat, Rh) | 1 |
218-5612 Control Gp-Pilot Operated Hyd
| 0T***44 | Bolt (1.25" Long) | 2 |
| 21***12 | Control Group-Pilot Operated Hydraulic; -Work Tool | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
218-5931 Control Gp-Pilot Operated Hyd
| 10***57 | Strip; (Locking) (275cm) | 0 |
| 10***56 | Seal; (275cm) | 0 |
| 14***19 | Window; (Rear) | 1 |
218-5933 Control Gp-Pilot Operated Hyd
| 20***39 | Seal; (138-cm) | 0 |
| 20***73 | Seal; (220-cm) | 0 |
| 21***33 | Control Group-Pilot Operated Hydraulic | 1 |
218-5932 Control Gp-Pilot Operated Hyd
| 21***32 | Control Group-Pilot Operated Hydraulic; -Hydrostatic | 1 |
| 22***57 | Window Group-Cab; -Upper,Lh | 1 |
| 22***58 | Window Group-Cab; -Upper, Rh | 1 |
218-5930 Control Gp-Pilot Operated Hyd
| 09***25 | Pin-Clevis | 1 |
| 15***82 | Spring-Gas; (Non-Locking) | 1 |
| 17***05 | Pin | 1 |
218-6419 Cover Gp-Console -Without Air Conditioner, Heater
| 21***19 | Cover Group-Console; -Without Air Conditioner, Heater | 1 |
| 29***33 | Film-Information; (Power) | 1 |
142-9118 Cover Gp-Instrument Panel -Service Meter
| 14***18 | Cover Group-Instrument Panel; -Service Meter | 1 |
| 15***75 | Bolt | 5 |
| 15***84 | Washer | 1 |
218-6440 Door & Mtg Gp-Cab -Polycarbonate
| 19***10 | Film-Identification; (Synthetic Hydraulic Oil, Read Omm) | 1 |
| 21***40 | Door & Mtg Group-Cab; -Polycarbonate | 1 |
223-0600 Door & Mtg Gp-Cab -Glass
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
223-0616 Door Gp-Cab -Glass
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 1 |
| 22***16 | Door Group-Cab; -Glass | 1 |
276-3615 Door Gp-Cab -Polycarbonate
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
218-6431 Door Gp-Cab -Glass
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
276-3440 Door Gp-Cab -Polycarbonate
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
218-6394 Duct Gp-Cab Air
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***94 | Duct Group-Cab Air | 1 |
231-7327 Frame Gp-Window -Lh
| 23***27 | Frame Group-Window; -Lh | 1 |
231-7325 Frame Gp-Window -Rh
| 19***10 | Film-Identification; (Synthetic Hydraulic Oil, Read Omm) | 1 |
| 23***25 | Frame Group-Window; -Rh | 1 |
216-4712 Gauge & Warning Gp -Lh
| 21***12 | Gauge & Warning Group; -Lh | 1 |
216-4713 Gauge & Warning Gp -Rh
| 21***13 | Gauge & Warning Group; -Rh | 1 |
233-5632 Guard Gp-Rops/Fops
| 23***32 | Guard Group-Rops/Fops | 1 |
218-6400 Handhold Gp
| 21***00 | Handhold Group | 1 |
298-7197 Handle Gp
| 29***97 | Handle Group | 1 |
218-6118 Handle Gp-Modular
| 21***18 | Handle Group-Modular | 1 |
218-6117 Handle Gp-Modular
| 21***17 | Handle Group-Modular | 1 |
229-8746 Heater & Mtg Gp-Cab
| 22***46 | Heater & Mtg Group-Cab | 1 |
218-6272 Heater Ar-Cab
| 21***72 | Heater Ar-Cab | 1 |
218-6746 Heater Gp-Cab -Kit
| 21***46 | Heater Group-Cab; -Kit | 1 |
218-6393 Heater Gp-Cab
| 21***93 | Heater Group-Cab | 1 |
245-6811 Holder-Cup
| 24***11 | Holder-Cup | 1 |
231-8122 Housing As-Side -Air Conditioner, Heater
| 23***22 | Housing As-Side; -Air Conditioner, Heater | 1 |
218-6271 Installation Gp-Cover & Lines -Without Heater Or A/C
| 21***71 | Installation Group-Cover & Lines; -Without Heater Or A/C | 1 |
218-6744 Kit-Cab Door & Mounting -Glass
| 21***44 | Kit-Cab Door & Mounting; -Glass | 1 |
218-6743 Kit-Cab Door & Mounting -Polycarbonate
| 21***43 | Kit-Cab Door & Mounting; -Polycarbonate | 1 |
233-5864 Kit-Cab Seal -Debris Barrier
| 23***64 | Kit-Cab Seal; -Debris Barrier | 1 |
234-0774 Lever Gp-Governor
| 23***74 | Lever Group-Governor | 1 |
218-6356 Liner Gp-Cab
| 21***56 | Liner Group-Cab | 1 |
142-9311 Liner-Cab -Gray
| 14***11 | Liner-Cab; -Gray | 1 |
218-6086 Lines Gp-Heater
| 21***86 | Lines Group-Heater | 1 |
6v-1970 Literature Gp
| 6V***70 | Literature Group; (Literature Compartment) | 1 |
258-4230 Mirror Gp-Rear View
| 25***30 | Mirror Group-Rear View | 1 |
218-6395 Mirror Gp-Rear View
| 21***95 | Mirror Group-Rear View | 1 |
223-6537 Module Gp-Warning Indicator
| 22***37 | Module Group-Warning Indicator | 1 |
249-2910 Module Gp-Warning Indicator
| 24***10 | Module Group-Warning Indicator | 1 |
330-5012 Motor Gp-Window Wiper
| 33***12 | Motor Group-Window Wiper | 1 |
218-6370 Mounting Gp-Rops
| 21***70 | Mounting Group-Rops | 1 |
295-7301 Option Ar-Cab
| 29***01 | Option Ar-Cab | 1 |
295-7311 Option Ar-Cab
| 29***11 | Option Ar-Cab | 1 |
295-7321 Option Ar-Cab
| 29***21 | Option Ar-Cab | 1 |
218-5791 Panel Ar-Instrument -Eame
| 21***91 | Panel Ar-Instrument; -Eame | 1 |
218-5790 Panel Ar-Instrument
| 21***90 | Panel Ar-Instrument; -Nacd | 1 |
216-4751 Panel Gp-Instrument
| 21***51 | Panel Group-Instrument; -Eame | 1 |
225-7998 Panel Gp-Instrument
| 22***98 | Panel Group-Instrument; -Nacd | 1 |
229-8744 Panel Gp-Side -Without Heater Or A/C
| 22***44 | Panel Group-Side; -Without Heater Or A/C | 1 |
218-6430 Panel Gp-Side
| 21***30 | Panel Group-Side | 1 |
325-8382 Pedal Gp-Governor
| 32***82 | Pedal Group-Governor | 1 |
218-5565 Pedal Gp-Governor -Includes Lever
| 21***65 | Pedal Group-Governor; -Includes Lever | 1 |
327-8939 Pedal Gp-Governor
| 32***39 | Pedal Group-Governor | 1 |
218-6360 Platform Gp-Operator
| 21***60 | Platform Group-Operator | 1 |
284-8955 Radio Gp -Am/Fm/Wb/Sirius/ Cd Player
| 28***55 | Radio Group; -Am/Fm/Wb/Sirius/ Cd Player | 1 |
284-8953 Radio Gp -Am/Fm/Wb/Cd Player
| 28***53 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
284-8954 Radio Gp -Am/Fm/Wb/Xm/ Cd Player
| 28***54 | Radio Group; -Am/Fm/Wb/Xm/ Cd Player | 1 |
218-6407 Seal Gp-Cab -Debris Barrier
| 21***07 | Seal Group-Cab; -Debris Barrier | 1 |
276-7277 Seat Belt Gp
| 27***77 | Seat Belt Group | 1 |
276-7276 Seat Belt Gp
| 27***76 | Seat Belt Group; -Suspension | 1 |
276-6020 Seat Belt Gp
| 27***20 | Seat Belt Group | 1 |
276-6019 Seat Belt Gp
| 27***19 | Seat Belt Group | 1 |
218-5562 Seat Gp -Static
| 21***62 | Seat Group; -Static | 1 |
142-9305 Seat Gp -Suspension
| 14***05 | Seat Group; -Suspension | 1 |
219-4380 Seat Gp-Adjustable
| 21***80 | Seat Group-Adjustable | 1 |
218-6380 Spring Gp-Gas -Cab, Door
| 21***80 | Spring Group-Gas; -Cab, Door | 1 |
166-2569 Visor Gp-Cab
| 16***69 | Visor Group-Cab | 1 |
173-3022 Visor Gp-Cab
| 17***22 | Visor Group-Cab | 1 |
218-6411 Window Gp-Cab -Side
| 21***11 | Window Group-Cab; -Side | 1 |
218-6745 Window Gp-Cab -Kit, Side
| 21***45 | Window Group-Cab; -Kit, Side | 1 |
224-7057 Window Gp-Cab -Upper,Lh
| 22***57 | Window Group-Cab; -Upper,Lh | 1 |
224-7058 Window Gp-Cab -Upper, Rh
| 22***58 | Window Group-Cab; -Upper, Rh | 1 |
195-6723 Window Gp-Cab -Rear
| 19***23 | Window Group-Cab; -Rear | 1 |
Power Train
142-8758 Axle Gp
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 09***17 | Seal-O-Ring (Id=13.80mm) | 1 |
| 14***90 | Ring-Split | 1 |
261-6255 Axle Gp
| 14***62 | Flange-Nylon | 1 |
| 14***19 | Plate-Adapter | 1 |
| 26***55 | Axle Group | 1 |
142-8760 Drive Gp-Tandem
| 14***60 | Drive Group-Tandem | 2 |
| 19***50 | Motor & Mtg Group-Hydrostatic | 1 |
| 21***19 | Pump & Mtg Group-Hydrostatic | 1 |
218-6624 Filter & Lines Gp-Hydraulic
| 09***94 | Ring-Retaining | 1 |
| 16***42 | Washer-Hard; (14.8x27x3-mm Thk) | 2 |
| 16***39 | Bolt; (M14x2x40-mm) | 2 |
223-9974 Filter Gp-Oil -Hydraulic
| 09***94 | Ring-Retaining | 1 |
| 16***42 | Washer-Hard; (14.8x27x3-mm Thk) | 2 |
| 16***39 | Bolt; (M14x2x40-mm) | 2 |
218-6089 Lines Gp-Hydrostatic
| 08***98 | Bearing | 2 |
| 10***65 | Circlip | 2 |
| 12***59 | Bearing-Roller | 2 |
308-0421 Manifold Gp-Return
| 10***09 | Bearing | 2 |
| 10***65 | Circlip | 2 |
| 12***59 | Bearing-Roller | 2 |
191-9650 Motor & Mtg Gp-Hydrostatic
| 14***85 | Wheel As | 1 |
| 14***86 | Tire; (10-16.5) | 1 |
| 15***99 | Valve As-Tire | 1 |
280-7854 Motor Gp-Piston -Hydrostatic
| 14***85 | Wheel As | 1 |
| 14***86 | Tire; (10-16.5) | 1 |
| 15***99 | Valve As-Tire | 1 |
228-1763 Mounting Gp-Pump
| 14***90 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***08 | Tire; (10-16.5) | 1 |
218-6500 Power Train Ar
| 14***90 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***08 | Tire; (10-16.5) | 1 |
218-5719 Pump & Mtg Gp-Hydrostatic
| 14***85 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***08 | Tire; (10-16.5) | 1 |
307-3062 Pump Gp-Piston
| 15***99 | Valve As-Tire | 1 |
| 18***68 | Wheel As | 1 |
| 18***34 | Tire; (265-521) | 1 |
289-6340 Pump Gp-Piston
| 15***99 | Valve As-Tire | 1 |
| 18***68 | Wheel As | 1 |
| 18***34 | Tire; (265-521) | 1 |
238-7739 Tire & Rim Gp -Rh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***09 | Tire & Rim Group; -Lh | 2 |
| 16***10 | Tire & Rim Group; -Rh | 2 |
142-7484 Tire & Rim Gp -Lh
| 14***84 | Tire & Rim Group; -Lh | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***69 | Wheel As | 1 |
185-8678 Tire & Rim Gp -Lh
| 14***90 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***78 | Tire & Rim Group; -Lh | 1 |
185-9927 Tire & Rim Gp -Rh
| 14***85 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***27 | Tire & Rim Group; -Rh | 1 |
199-5434 Tire & Rim Gp -Lh
| 14***84 | Tire & Rim Group; -Lh | 2 |
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***92 | Tire & Rim Group; -Rh | 2 |
165-2610 Tire & Rim Gp -Rh
| 14***90 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***10 | Tire & Rim Group; -Rh | 1 |
165-2609 Tire & Rim Gp -Lh
| 14***90 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***09 | Tire & Rim Group; -Lh | 1 |
185-8673 Tire & Rim Gp -Rh
| 14***81 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***73 | Tire & Rim Group; -Rh | 1 |
185-8670 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 17***70 | Wheel As | 1 |
| 18***70 | Tire & Rim Group; -Lh | 1 |
265-2894 Tire & Rim Gp -Lh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***70 | Tire & Rim Group; -Lh | 2 |
| 18***71 | Tire & Rim Group; -Rh | 2 |
165-2605 Tire & Rim Gp -Lh
| 14***85 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***05 | Tire & Rim Group; -Lh | 1 |
185-8679 Tire & Rim Gp -Rh
| 14***90 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***79 | Tire & Rim Group; -Rh | 1 |
185-8672 Tire & Rim Gp -Lh
| 14***81 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***72 | Tire & Rim Group; -Lh | 1 |
150-8592 Tire & Rim Gp -Rh
| 15***92 | Tire & Rim Group; -Rh | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***69 | Wheel As | 1 |
165-2606 Tire & Rim Gp -Rh
| 14***85 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***06 | Tire & Rim Group; -Rh | 1 |
238-7738 Tire & Rim Gp -Lh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***05 | Tire & Rim Group; -Lh | 2 |
| 16***06 | Tire & Rim Group; -Rh | 2 |
185-9926 Tire & Rim Gp -Lh
| 14***85 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***26 | Tire & Rim Group; -Lh | 1 |
265-2896 Tire & Rim Gp -Lh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***78 | Tire & Rim Group; -Lh | 2 |
| 18***79 | Tire & Rim Group; -Rh | 2 |
265-2895 Tire & Rim Gp -Rh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***72 | Tire & Rim Group; -Lh | 2 |
| 18***73 | Tire & Rim Group; -Rh | 2 |
185-8671 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 17***70 | Wheel As | 1 |
| 18***71 | Tire & Rim Group; -Rh | 1 |
199-5435 Tire & Rim Gp -Rh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 19***34 | Tire & Rim Group; -Lh | 2 |
| 19***35 | Tire & Rim Group; -Rh | 3 |
265-2897 Tire & Rim Gp -Rh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***26 | Tire & Rim Group; -Lh | 2 |
| 18***27 | Tire & Rim Group; -Rh | 2 |
165-2602 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***02 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 26***96 | Tire & Rim Group; -Lh | 2 |
185-8661 Wheel & Tire Ar -Low Side Wall
| 18***61 | Wheel & Tire Ar; -Low Side Wall | 1 |
| 31***26 | Tire; (31x5x9) | 4 |
165-4891 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***91 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 22***36 | Tire-Solid; (31x6x10) | 2 |
252-0378 Wheel & Tire Ar -Solid
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***46 | Box Group-Storage | 1 |
| 21***01 | Floor Mat | 1 |
185-8660 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***60 | Wheel & Tire Ar; -Low Side Wall | 1 |
| 22***36 | Tire-Solid; (31x6x10) | 2 |
185-8664 Wheel & Tire Ar -Heavy Duty
| 18***64 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 21***47 | Spacer | 2 |
| 21***51 | Bumper As | 1 |
252-0367 Wheel & Tire Ar -Solid
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***15 | Lighting Group-Roading | 1 |
252-0344 Wheel & Tire Ar
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***15 | Lighting Group-Roading | 1 |
142-8666 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***66 | Wheel & Tire Ar | 1 |
| 23***38 | Tire & Rim Group; -Lh | 2 |
185-8665 Wheel & Tire Ar -Heavy Duty
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 18***65 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 21***46 | Box Group-Storage | 1 |
238-7737 Wheel & Tire Ar
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
252-0345 Wheel & Tire Ar
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 19***84 | Film Group; -Clearance | 1 |
| 21***46 | Box Group-Storage | 1 |
142-9121 Wheel & Tire Ar -High Flotation
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***21 | Wheel & Tire Ar; -High Flotation | 1 |
| 26***94 | Tire & Rim Group; -Lh | 2 |
317-0690 Wheel & Tire Gp
| 11***34 | Film-Warning; (Steering) | 1 |
| 16***62 | Plate As | 1 |
| 16***69 | Visor Group-Cab | 1 |
Service Equipment And Supplies
295-7116 Film Gp
| 29***16 | Film Group | 1 |
191-9684 Film Gp -Clearance
| 19***84 | Film Group; -Clearance | 1 |
238-7734 Film Gp -Un
| 23***34 | Film Group; -Un | 1 |
295-7143 Film Gp
| 29***43 | Film Group | 1 |
322-7811 Parts Gp-Miscellaneous
| 32***11 | Parts Group-Miscellaneous | 1 |
295-7195 Plate & Film Gp
| 29***95 | Plate & Film Group | 1 |
295-7191 Plate & Film Gp
| 29***91 | Plate & Film Group | 1 |
218-6291 Plate & Film Gp
| 21***91 | Plate & Film Group | 1 |
218-5951 Plate & Film Gp
| 21***51 | Plate & Film Group | 1 |
247-0678 Plate & Film Gp
| 24***78 | Plate & Film Group | 1 |
308-5206 Plate & Film Gp
| 30***06 | Plate & Film Group | 1 |
286-9251 Plate & Film Gp
| 28***51 | Plate & Film Group | 1 |
195-6740 Plate & Film Gp
| 19***40 | Plate & Film Group | 1 |
Work Tools
216-8756 Arm Gp-Material Handling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***56 | Arm Group-Material Handling | 1 |
177-1989 Blade Ar -Angling
| 15***77 | Edge | 1 |
| 17***89 | Blade Ar; -Angling | 1 |
| 32***54 | Guard As; (72-In) | 1 |
231-5275 Blade Ar -Angling
| 19***16 | Edge | 1 |
| 23***75 | Blade Ar; -Angling | 1 |
| 32***64 | Guard As; (78-In) | 1 |
177-1990 Blade Ar -Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***90 | Blade Ar; -Angling | 1 |
231-5277 Blade Ar -Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 23***77 | Blade Ar; -Angling | 1 |
177-1988 Blade As-Angling
| 13***87 | Edge Group-Cutting | 1 |
| 17***88 | Blade As-Angling | 1 |
| 26***84 | Bucket Group-Dirt | 1 |
222-7412 Blade As-Angling
| 13***83 | Edge Group-Cutting | 1 |
| 22***12 | Blade As-Angling | 1 |
| 27***34 | Bucket As-Dirt | 1 |
230-4596 Blade As-Angling
| 13***84 | Edge Group-Cutting | 1 |
| 23***96 | Blade As-Angling | 1 |
| 27***37 | Bucket As-Dirt | 1 |
177-1987 Blade As-Angling
| 17***87 | Blade As-Angling | 1 |
| 29***44 | Edge | 1 |
| 32***74 | Guard As; (84-In) | 1 |
222-7724 Blade Gp-Angling
| 13***84 | Edge Group-Cutting | 1 |
| 22***24 | Blade Group-Angling | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
177-1982 Blade Gp-Angling
| 13***86 | Edge Group-Cutting | 1 |
| 17***82 | Blade Group-Angling | 1 |
| 28***89 | Bucket As-Dirt | 1 |
231-5276 Blade Gp-Angling
| 14***99 | Tooth Group-Uni | 8 |
| 23***76 | Blade Group-Angling | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
177-1981 Blade Gp-Angling
| 13***85 | Edge Group-Cutting | 1 |
| 17***81 | Blade Group-Angling | 1 |
| 27***40 | Bucket As-Dirt | 1 |
279-5385 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
| 27***85 | Blade Group-Multipurpose Bucket | 1 |
325-7048 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 21***29 | Bucket Ar-Grapple | 1 |
| 32***48 | Blade Group-Multipurpose Bucket | 1 |
325-7068 Blade Gp-Multipurpose Bucket
| 28***01 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 32***68 | Blade Group-Multipurpose Bucket | 1 |
279-5405 Blade Gp-Multipurpose Bucket
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
325-7079 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 27***21 | Bucket As-Light Material | 1 |
| 32***79 | Blade Group-Multipurpose Bucket | 1 |
325-7078 Blade Gp-Multipurpose Bucket
| 28***44 | Bucket Group-Grapple | 1 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 28***50 | Lines Group-Grapple | 1 |
325-7049 Blade Gp-Multipurpose Bucket
| 28***99 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 32***49 | Blade Group-Multipurpose Bucket | 1 |
325-7058 Blade Gp-Multipurpose Bucket
| 28***02 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 32***58 | Blade Group-Multipurpose Bucket | 1 |
279-5396 Blade Gp-Multipurpose Bucket
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
279-5388 Blade Gp-Multipurpose Bucket
| 19***24 | Edge Group-Cutting | 1 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
293-0142 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 15***24 | Bucket Ar-Grapple | 1 |
| 29***42 | Blade Group-Multipurpose Bucket | 1 |
325-7039 Blade Gp-Multipurpose Bucket
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
| 21***28 | Bucket Group-Grapple | 1 |
279-5384 Blade Gp-Multipurpose Bucket
| 14***99 | Tooth Group-Uni | 8 |
| 27***72 | Bucket As-General Purpose | 1 |
| 27***84 | Blade Group-Multipurpose Bucket | 1 |
325-7069 Blade Gp-Multipurpose Bucket
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 28***51 | Plate & Film Group | 1 |
| 28***78 | Bucket Group-Grapple | 1 |
159-5347 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
| 27***72 | Bucket As-General Purpose | 1 |
159-5345 Blade Gp-Multipurpose Bucket
| 14***99 | Tooth Group-Uni | 8 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
| 27***68 | Bucket As-General Purpose | 1 |
154-5080 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 27***68 | Bucket As-General Purpose | 1 |
325-7059 Blade Gp-Multipurpose Bucket
| 28***00 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 32***59 | Blade Group-Multipurpose Bucket | 1 |
279-5387 Blade Gp-Multipurpose Bucket
| 14***99 | Tooth Group-Uni | 9 |
| 27***76 | Bucket As-General Purpose | 1 |
| 27***87 | Blade Group-Multipurpose Bucket | 1 |
325-7038 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
| 32***38 | Blade Group-Multipurpose Bucket, Protective Cover | 1 |
279-5406 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 15***23 | Bucket Ar-Grapple | 1 |
| 27***06 | Blade Group-Multipurpose Bucket | 1 |
279-5395 Blade Gp-Multipurpose Bucket
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
279-5438 Bucket Ar-Dirt
| 27***38 | Bucket Ar-Dirt | 1 |
| 29***23 | Bucket As-Light Material, Wheel Disc | 1 |
| 29***80 | Edge Group-Cutting | 1 |
268-4083 Bucket Ar-Dirt
| 13***87 | Edge Group-Cutting | 1 |
| 26***83 | Bucket Ar-Dirt | 1 |
| 27***24 | Bucket As-Light Material | 1 |
285-6090 Bucket Ar-Dirt
| 14***99 | Tooth Group-Uni | 8 |
| 27***82 | Bucket Ar-Multipurpose | 1 |
| 28***90 | Bucket Ar-Dirt, Turbocharger | 1 |
279-5435 Bucket Ar-Dirt
| 19***24 | Edge Group-Cutting | 1 |
| 27***29 | Bucket As-Light Material | 1 |
| 27***35 | Bucket Ar-Dirt | 1 |
279-5441 Bucket Ar-Dirt
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***52 | Lines Group-Bucket; -Multipurpose | 1 |
279-5369 Bucket Ar-General Purpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5374 Bucket Ar-General Purpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5370 Bucket Ar-General Purpose
| 13***85 | Edge Group-Cutting | 1 |
| 27***70 | Bucket Ar-General Purpose | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
279-5377 Bucket Ar-General Purpose
| 13***86 | Edge Group-Cutting | 1 |
| 27***77 | Bucket Ar-General Purpose | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
296-8192 Bucket Ar-General Purpose
| 14***99 | Tooth Group-Uni | 9 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
| 29***92 | Bucket Ar-General Purpose | 1 |
279-5373 Bucket Ar-General Purpose
| 14***99 | Tooth Group-Uni | 8 |
| 27***73 | Bucket Ar-General Purpose | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
279-5378 Bucket Ar-General Purpose
| 14***99 | Tooth Group-Uni | 8 |
| 27***78 | Bucket Ar-General Purpose | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
279-5366 Bucket Ar-General Purpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5365 Bucket Ar-General Purpose
| 13***84 | Edge Group-Cutting | 1 |
| 27***65 | Bucket Ar-General Purpose | 1 |
| 27***82 | Bucket Ar-Multipurpose | 1 |
217-6230 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 21***30 | Bucket Ar-Grapple | 1 |
157-7227 Bucket Ar-Grapple
| 15***27 | Bucket Ar-Grapple; -Industrial | 1 |
| 19***24 | Edge Group-Cutting | 1 |
| 29***39 | Engine; - Assembly, Bucket Ar-Multipurpose | 1 |
217-6229 Bucket Ar-Grapple
| 14***99 | Tooth Group-Uni | 8 |
| 21***29 | Bucket Ar-Grapple | 1 |
| 32***46 | Bucket Ar-Multipurpose | 1 |
157-7226 Bucket Ar-Grapple
| 14***99 | Tooth Group-Uni | 9 |
| 15***26 | Bucket Ar-Grapple; -Industrial | 1 |
| 29***39 | Engine; - Assembly, Bucket Ar-Multipurpose | 1 |
158-6095 Bucket Ar-Grapple
| 14***99 | Tooth Group-Uni | 8 |
| 15***95 | Bucket Ar-Grapple; -Industrial | 1 |
| 32***36 | Bucket Ar-Multipurpose, Protective Cover | 1 |
157-7225 Bucket Ar-Grapple -Industrial
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
| 16***36 | Cover Group-Lines | 1 |
157-7224 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***24 | Bucket Ar-Grapple | 1 |
| 16***36 | Cover Group-Lines | 1 |
165-8780 Bucket Ar-Grapple -Utility
| 13***84 | Edge Group-Cutting | 1 |
| 16***80 | Bucket Ar-Grapple; -Utility | 1 |
| 32***36 | Bucket Ar-Multipurpose, Protective Cover | 1 |
286-9300 Bucket Ar-Grapple
| 14***99 | Tooth Group-Uni | 9 |
| 28***00 | Bucket Ar-Grapple | 1 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
285-6111 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
165-8779 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 16***79 | Bucket Ar-Grapple | 1 |
285-6104 Bucket Ar-Grapple
| 14***99 | Tooth Group-Uni | 8 |
| 28***04 | Bucket Ar-Grapple | 1 |
| 32***56 | Bucket Ar-Multipurpose | 1 |
285-6093 Bucket Ar-Grapple
| 13***85 | Edge Group-Cutting | 1 |
| 28***93 | Bucket Ar-Grapple | 1 |
| 32***46 | Bucket Ar-Multipurpose | 1 |
285-6112 Bucket Ar-Grapple
| 13***86 | Edge Group-Cutting | 1 |
| 28***12 | Bucket Ar-Grapple | 1 |
| 32***56 | Bucket Ar-Multipurpose | 1 |
157-7223 Bucket Ar-Grapple
| 13***87 | Edge Group-Cutting | 1 |
| 15***23 | Bucket Ar-Grapple | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
286-9301 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5425 Bucket Ar-Light Material
| 14***99 | Tooth Group-Uni | 9 |
| 27***25 | Bucket Ar-Light Material | 1 |
| 32***76 | Bucket Ar-Multipurpose | 1 |
279-5420 Bucket Ar-Light Material
| 13***87 | Edge Group-Cutting | 1 |
| 27***20 | Bucket Ar-Light Material | 1 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
279-5430 Bucket Ar-Light Material
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
296-7597 Bucket Ar-Light Material
| 19***24 | Edge Group-Cutting | 1 |
| 29***97 | Bucket Ar-Light Material | 1 |
| 32***76 | Bucket Ar-Multipurpose | 1 |
279-5401 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 27***01 | Bucket Ar-Multipurpose | 1 |
279-5382 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***82 | Bucket Ar-Multipurpose | 1 |
279-5400 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***67 | Bucket As-General Purpose | 1 |
325-7065 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 32***65 | Bucket Ar-Multipurpose | 1 |
296-8055 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 29***71 | Bucket As-General Purpose, Cap | 1 |
325-7045 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
| 16***89 | Tack-Fastener | 4 |
154-5004 Bucket Ar-Multipurpose
| 13***84 | Edge Group-Cutting | 1 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
| 28***96 | Bucket Group-Utility | 1 |
154-5045 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***45 | Bucket Ar-Multipurpose | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5403 Bucket Ar-Multipurpose
| 19***22 | Edge | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
325-7056 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***26 | Bucket As-Grapple | 1 |
325-7080 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 29***24 | Bucket As-Light Material, Tyre/Tire, Tyre/Tire; Tire | 1 |
325-7060 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***22 | Bucket As-Light Material | 1 |
279-5392 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 27***92 | Bucket Ar-Multipurpose | 1 |
325-7035 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 32***35 | Bucket Ar-Multipurpose | 1 |
325-7040 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 32***40 | Bucket Ar-Multipurpose | 1 |
325-7076 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***28 | Bucket As-Light Material | 1 |
279-5380 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***80 | Bucket Ar-Multipurpose | 1 |
325-7050 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***89 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5381 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 27***81 | Bucket Ar-Multipurpose | 1 |
279-5391 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***91 | Bucket Ar-Multipurpose | 1 |
279-5399 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 27***99 | Bucket Ar-Multipurpose | 1 |
154-5046 Bucket Ar-Multipurpose
| 14***34 | Edge | 1 |
| 15***46 | Bucket Ar-Multipurpose | 1 |
279-5390 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
154-5008 Bucket Ar-Multipurpose
| 13***85 | Edge Group-Cutting | 1 |
| 15***08 | Bucket Ar-Multipurpose | 1 |
| 28***99 | Bucket Group-Utility | 1 |
325-7036 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 32***36 | Bucket Ar-Multipurpose, Protective Cover | 1 |
325-7066 Bucket Ar-Multipurpose
| 19***22 | Edge | 1 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
325-7046 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***88 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
154-5048 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 15***48 | Bucket Ar-Multipurpose | 1 |
279-5402 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***71 | Bucket As-General Purpose | 1 |
325-7055 Bucket Ar-Multipurpose
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***22 | Edge | 1 |
| 32***55 | Bucket Ar-Multipurpose | 1 |
325-7075 Bucket Ar-Multipurpose
| 22***82 | Edge | 1 |
| 32***75 | Bucket Ar-Multipurpose | 1 |
296-8057 Bucket Ar-Multipurpose
| 22***32 | Edge | 1 |
| 29***57 | Bucket Ar-Multipurpose | 1 |
154-5047 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***47 | Bucket Ar-Multipurpose | 1 |
| 16***89 | Tack-Fastener | 4 |
293-0139 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***75 | Bucket As-General Purpose | 1 |
279-5398 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***63 | Bucket As-General Purpose | 1 |
325-7070 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***23 | Bucket As-Light Material | 1 |
154-5010 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 28***02 | Bucket Group-Utility | 1 |
285-6100 Bucket Ar-Utility
| 14***36 | Edge | 1 |
| 28***00 | Bucket Ar-Utility | 1 |
285-6101 Bucket Ar-Utility
| 14***37 | Edge | 1 |
| 28***01 | Bucket Ar-Utility | 1 |
285-6095 Bucket Ar-Utility
| 28***95 | Bucket Ar-Utility | 1 |
| 29***57 | Edge | 1 |
188-2716 Bucket As-Dirt
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***42 | Bucket As-Grapple; -Industrial | 1 |
285-6089 Bucket As-Dirt
| 15***12 | Pin | 2 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 27***05 | Blade Group-Multipurpose Bucket | 1 |
165-6156 Bucket As-Dirt
| 14***99 | Tooth Group-Uni | 9 |
| 16***56 | Bucket As-Dirt | 1 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
285-6088 Bucket As-Dirt
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 27***96 | Blade Group-Multipurpose Bucket | 1 |
188-3526 Bucket As-Dirt
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***43 | Bucket As-Grapple | 1 |
141-6704 Bucket As-Dirt
| 13***86 | Edge Group-Cutting | 1 |
| 14***04 | Bucket As-Dirt | 1 |
| 18***26 | Bucket As-Dirt | 1 |
279-5440 Bucket As-Dirt
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
268-4089 Bucket As-Dirt
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 21***27 | Bucket As-Grapple | 1 |
279-5437 Bucket As-Dirt
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
279-5439 Bucket As-Dirt
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 27***84 | Blade Group-Multipurpose Bucket | 1 |
279-5434 Bucket As-Dirt
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 27***34 | Bucket As-Dirt | 1 |
165-6157 Bucket As-Dirt
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***57 | Bucket As-Dirt | 1 |
152-0227 Bucket As-Dirt
| 15***27 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5433 Bucket As-Dirt
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
279-5436 Bucket As-Dirt
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 27***36 | Bucket As-Dirt | 1 |
165-6152 Bucket As-General Purpose
| 15***12 | Pin | 2 |
| 16***52 | Bucket As-General Purpose; -0.36 Cu M | 1 |
| 29***42 | Blade Group-Multipurpose Bucket | 1 |
279-5367 Bucket As-General Purpose
| 15***12 | Pin | 2 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 27***67 | Bucket As-General Purpose | 1 |
279-5368 Bucket As-General Purpose
| 15***12 | Pin | 2 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 27***68 | Bucket As-General Purpose | 1 |
165-6153 Bucket As-General Purpose
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 16***53 | Bucket As-General Purpose | 1 |
279-5376 Bucket As-General Purpose
| 19***43 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
279-5363 Bucket As-General Purpose
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 27***63 | Bucket As-General Purpose | 1 |
292-9270 Bucket As-General Purpose -High Capacity
| 19***42 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
279-5372 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***72 | Bucket As-General Purpose | 1 |
279-5364 Bucket As-General Purpose
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
292-9271 Bucket As-General Purpose
| 19***45 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 29***71 | Bucket As-General Purpose, Cap | 1 |
279-5375 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***75 | Bucket As-General Purpose | 1 |
279-5371 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***71 | Bucket As-General Purpose | 1 |
217-6226 Bucket As-Grapple
| 14***05 | Bearing-Sleeve | 4 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 21***26 | Bucket As-Grapple | 1 |
169-8942 Bucket As-Grapple
| 14***05 | Bearing-Sleeve | 4 |
| 14***37 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
169-8941 Bucket As-Grapple
| 14***05 | Bearing-Sleeve | 4 |
| 14***36 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
156-0888 Bucket As-Grapple
| 15***88 | Bucket As-Grapple | 1 |
| 26***81 | Carriage Group-Fork | 6 |
156-0889 Bucket As-Grapple
| 14***05 | Bearing-Sleeve | 4 |
| 14***35 | Edge | 1 |
| 15***89 | Bucket As-Grapple | 1 |
156-0887 Bucket As-Grapple
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
217-6227 Bucket As-Grapple
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
169-8943 Bucket As-Grapple
| 14***05 | Bearing-Sleeve | 4 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***30 | Plate-Identification; (Cat) | 2 |
279-5424 Bucket As-Light Material
| 16***28 | Plate | 1 |
| 27***24 | Bucket As-Light Material | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 5 |
279-5428 Bucket As-Light Material
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
279-5422 Bucket As-Light Material
| 12***01 | Plate-Retainer | 2 |
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 2 |
164-7414 Bucket As-Light Material
| 16***14 | Bucket As-Light Material | 1 |
| 20***20 | Coupler Group-Quick; -Mechanical | 1 |
| 21***11 | Lines Group-Lowering Control; -Manual | 1 |
164-7416 Bucket As-Light Material
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 16***16 | Bucket As-Light Material | 1 |
| 20***21 | Coupler Group-Quick; -Hydraulic | 1 |
292-9223 Bucket As-Light Material
| 14***14 | Edge-Cutting | 1 |
| 29***23 | Bucket As-Light Material, Wheel Disc | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 10 |
279-5429 Bucket As-Light Material
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
279-5421 Bucket As-Light Material
| 12***01 | Plate-Retainer | 2 |
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 2 |
292-9224 Bucket As-Light Material
| 14***88 | Edge-Cutting | 1 |
| 29***24 | Bucket As-Light Material, Tyre/Tire, Tyre/Tire; Tire | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 13 |
279-5423 Bucket As-Light Material
| 12***01 | Plate-Retainer | 2 |
| 20***85 | Pin | 2 |
| 21***62 | Cylinder & Link Group-Coupler; -Lh | 1 |
285-6097 Bucket As-Utility
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 19***24 | Edge-Cutting | 1 |
| 28***97 | Bucket As-Utility | 1 |
165-8833 Bucket As-Utility
| 13***96 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 16***33 | Bucket As-Utility | 1 |
165-8835 Bucket As-Utility
| 13***97 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 16***35 | Bucket As-Utility | 1 |
165-8832 Bucket As-Utility
| 13***95 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 16***32 | Bucket As-Utility | 1 |
285-6103 Bucket As-Utility
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 9 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 2 |
285-6098 Bucket As-Utility
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 13 |
| 28***98 | Bucket As-Utility, Fuel Injection Pump; - Assembly | 1 |
| 29***02 | Edge-Cutting | 1 |
165-8747 Bucket As-Utility
| 13***94 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 16***47 | Bucket As-Utility | 1 |
165-8746 Bucket As-Utility
| 13***93 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 6 |
| 16***46 | Bucket As-Utility | 1 |
165-8837 Bucket As-Utility
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 7 |
| 16***37 | Bucket As-Utility | 1 |
| 19***24 | Edge-Cutting | 1 |
268-4084 Bucket Gp-Dirt
| 16***54 | Tine | 1 |
| 26***84 | Bucket Group-Dirt | 1 |
| 3E***70 | Pin; (Spring) | 1 |
152-0231 Bucket Gp-Dirt
| 15***31 | Bucket Group-Dirt | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 2 |
188-2719 Bucket Gp-Dirt
| 18***19 | Bucket Group-Dirt | 1 |
| 28***10 | Fork Group-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
152-0232 Bucket Gp-Dirt
| 15***32 | Bucket Group-Dirt | 1 |
| 28***05 | Fork Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
152-0223 Bucket Gp-General Purpose
| 15***23 | Bucket Group-General Purpose | 1 |
| 15***40 | Pin | 4 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
296-8191 Bucket Gp-General Purpose
| 22***29 | Positioner Group-Fork | 1 |
| 29***91 | Bucket Group-General Purpose | 1 |
152-0224 Bucket Gp-General Purpose
| 15***24 | Bucket Group-General Purpose | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
152-0226 Bucket Gp-General Purpose
| 15***26 | Bucket Group-General Purpose | 1 |
| 22***29 | Positioner Group-Fork | 1 |
152-0225 Bucket Gp-General Purpose
| 15***25 | Bucket Group-General Purpose | 1 |
| 22***29 | Positioner Group-Fork | 1 |
156-0886 Bucket Gp-Grapple
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 19***45 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
286-9278 Bucket Gp-Grapple
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 28***78 | Bucket Group-Grapple | 1 |
156-0884 Bucket Gp-Grapple
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 19***43 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
286-9244 Bucket Gp-Grapple
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 16***45 | Fork As; (Utility) | 1 |
| 28***44 | Bucket Group-Grapple | 1 |
279-5359 Bucket Gp-Grapple -Industrial
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 16***39 | Fork Group-Utility | 1 |
217-6228 Bucket Gp-Grapple
| 16***41 | Tine | 1 |
| 21***28 | Bucket Group-Grapple | 1 |
| 9R***59 | Clip | 1 |
156-0885 Bucket Gp-Grapple
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 19***42 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
164-7412 Bucket Gp-Light Material
| 16***12 | Bucket Group-Light Material | 1 |
| 17***14 | Pin As | 1 |
| 17***55 | Shim; (1-mm Thk) | 1 |
154-5007 Bucket Gp-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***07 | Bucket Group-Multipurpose | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5404 Bucket Gp-Multipurpose
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 21***59 | Handle Group-Coupler; -Rh | 1 |
154-5009 Bucket Gp-Multipurpose
| 15***09 | Bucket Group-Multipurpose | 1 |
| 16***95 | Cylinder Group-Grapple | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
325-7037 Bucket Gp-Multipurpose
| 19***37 | Plate | 1 |
| 19***45 | Spring | 1 |
| 19***54 | Pin-Spring | 2 |
293-0141 Bucket Gp-Multipurpose
| 19***37 | Plate | 1 |
| 19***45 | Spring | 1 |
| 19***54 | Pin-Spring | 2 |
325-7067 Bucket Gp-Multipurpose
| 03***57 | Washer; (13x26x6-mm Thk) | 2 |
| 17***53 | Plate | 2 |
| 18***97 | Plate Group-Roading; -Lh | 1 |
325-7077 Bucket Gp-Multipurpose
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
279-5397 Bucket Gp-Multipurpose
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 21***58 | Handle Group-Coupler; -Lh | 1 |
325-7047 Bucket Gp-Multipurpose
| 19***37 | Plate | 1 |
| 19***54 | Pin-Spring | 2 |
| 23***93 | Spring | 1 |
279-5389 Bucket Gp-Multipurpose
| 15***11 | Pin | 4 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***43 | Arm As | 1 |
279-5383 Bucket Gp-Multipurpose
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***40 | Grapple Group-Utility | 1 |
| 17***36 | Bolt; (M12x1.75x35-mm) | 4 |
325-7057 Bucket Gp-Multipurpose
| 19***37 | Plate | 1 |
| 19***54 | Pin-Spring | 2 |
| 23***93 | Spring | 1 |
154-5005 Bucket Gp-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***05 | Bucket Group-Multipurpose | 1 |
| 16***89 | Tack-Fastener | 4 |
165-8777 Bucket Gp-Utility
| 16***77 | Bucket Group-Utility | 1 |
| 19***37 | Plate | 1 |
| 19***38 | Bracket | 1 |
285-6102 Bucket Gp-Utility
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
| 17***50 | Plate As; (Lh) | 1 |
165-8836 Bucket Gp-Utility
| 16***36 | Bucket Group-Utility | 1 |
| 17***47 | Pin | 1 |
| 9R***01 | Pin-Cotter | 1 |
285-6096 Bucket Gp-Utility
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 25***36 | Handle & Pin Group-Coupler; -Rh | 1 |
165-8778 Bucket Gp-Utility
| 16***78 | Bucket Group-Utility | 1 |
| 19***45 | Spring | 1 |
| 30***68 | Pin-Spring | 1 |
285-6099 Bucket Gp-Utility
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 25***38 | Handle & Pin Group-Coupler; -Lh | 1 |
353-1696 Carriage & Fork Ar
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 2 |
| 09***12 | Clip | 2 |
353-1694 Carriage & Fork Ar
| 11***14 | Screen; (Water Tank) | 1 |
| 11***15 | Gasket | 1 |
| 35***94 | Carriage & Fork Ar | 1 |
293-9428 Carriage & Fork Ar
| 17***41 | Spring | 4 |
| 17***73 | Plate As | 1 |
| 29***28 | Carriage & Fork Ar | 1 |
293-9427 Carriage & Fork Ar
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
| 17***51 | Plate As; (Rh) | 1 |
293-9429 Carriage & Fork Ar
| 18***86 | Step As | 1 |
| 29***29 | Carriage & Fork Ar | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
353-1693 Carriage & Fork Ar
| 2S***08 | Washer-Retaining; (0.531x3.25x0.438-In Thk) | 2 |
| 35***93 | Carriage & Fork Ar | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 1 |
353-1697 Carriage & Fork Ar
| 19***06 | Cap As; (Water Tank) | 1 |
| 19***07 | Fitting-Drain | 1 |
| 35***97 | Carriage & Fork Ar | 1 |
261-6681 Carriage Gp-Fork
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
| 26***81 | Carriage Group-Fork | 1 |
293-9426 Carriage Gp-Fork
| 13***91 | Nozzle As-Washer | 1 |
| 19***71 | Hose; (116-cm) | 0 |
| 24***66 | Clip-Washer Hose | 2 |
351-9371 Carriage Gp-Fork
| 19***37 | Insert-Threaded; (M8x1.25-Thd) | 2 |
| 19***39 | Stud | 4 |
| 21***42 | Plate | 2 |
293-0148 Clam As-Multipurpose Bucket
| 19***23 | Window Group-Cab; -Rear | 1 |
| 21***50 | Fastener Group-Wiring Harness | 1 |
| 21***70 | Mounting Group-Rops | 1 |
154-5070 Clam As-Multipurpose Bucket
| 15***71 | Compartment As | 1 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 19***35 | Insert-Threaded; (M6x1-Thd) | 4 |
199-8308 Clam As-Multipurpose Bucket
| 19***23 | Window Group-Cab; -Rear | 1 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 21***50 | Fastener Group-Wiring Harness | 1 |
154-5053 Clam As-Multipurpose Bucket
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 21***45 | Box As-Storage | 1 |
| 22***91 | Latch As | 1 |
149-4232 Clam As-Multipurpose Bucket
| 10***62 | Screw-Machine; (4-40x0.63-In) | 4 |
| 13***16 | Stud-Ball | 2 |
| 14***28 | Locknut; (4-40-Thd) | 4 |
296-0582 Conversion Gp-Work Tool -Kit, High Flow
| 29***82 | Conversion Group-Work Tool; -Kit, High Flow | 1 |
218-6321 Coupler Ar-Quick -Manual
| 21***86 | Button | 7 |
| 21***21 | Coupler Ar-Quick; -Manual | 1 |
| 21***67 | Cab Group-Enclosed Rops | 1 |
218-6322 Coupler Ar-Quick -Hydraulic
| 21***22 | Coupler Ar-Quick; -Hydraulic | 1 |
| 21***67 | Cab Group-Enclosed Rops | 1 |
206-3820 Coupler Gp-Quick
| 20***20 | Coupler Group-Quick; -Mechanical | 1 |
| 27***74 | Cable Group-Control | 1 |
| 29***97 | Handle Group | 1 |
206-3821 Coupler Gp-Quick
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 17***02 | Boot | 1 |
| 20***21 | Coupler Group-Quick; -Hydraulic | 1 |
162-5236 Cover Gp-Lines
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 17***02 | Boot | 1 |
215-3962 Cylinder & Link Gp-Coupler -Lh
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 17***03 | Boot | 1 |
| 21***62 | Cylinder & Link Group-Coupler; -Lh | 1 |
215-3963 Cylinder & Link Gp-Coupler -Rh
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
222-7546 Edge Gp-Bit & Cutting
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
222-7545 Edge Gp-Bit & Cutting
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
135-9387 Edge Gp-Cutting
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
135-9384 Edge Gp-Cutting
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***60 | Strap | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
195-7124 Edge Gp-Cutting
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
135-9383 Edge Gp-Cutting
| 13***83 | Edge Group-Cutting | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
149-5741 Edge Gp-Cutting
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***60 | Strap | 1 |
296-7680 Edge Gp-Cutting
| 11***60 | Strap | 1 |
| 21***19 | Valve Group-Pilot; -Direction, Speed | 1 |
| 21***22 | Bracket As | 1 |
135-9386 Edge Gp-Cutting
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***60 | Strap | 1 |
135-9385 Edge Gp-Cutting
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 8 |
279-5350 Fork Ar-Grapple -Industrial
| 21***22 | Bracket As | 1 |
| 21***80 | Control Group-Handle; -Direction, Speed | 1 |
| 23***31 | Film-Instruction; (Machine Control, Read Omm) | 1 |
279-5360 Fork Ar-Grapple -Industrial
| 11***60 | Strap | 1 |
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
| 21***19 | Valve Group-Pilot; -Direction, Speed | 1 |
285-6115 Fork Ar-Grapple -Utility
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 11***60 | Strap | 1 |
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
285-6114 Fork Ar-Grapple -Utility
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
| 21***22 | Bracket As | 1 |
| 21***85 | Control Group-Handle; -Direction, Speed | 1 |
164-9614 Fork Gp-Grapple
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 1 |
279-5351 Fork Gp-Grapple -Industrial
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 11***60 | Strap | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
285-6110 Fork Gp-Grapple
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
| 21***22 | Bracket As | 1 |
195-6942 Fork Gp-Pallet
| 17***05 | Screw-Button Head; (M6 X 1.0 X) | 8 |
| 19***42 | Fork Group-Pallet | 1 |
| 21***89 | Console; (Rh) | 1 |
243-0002 Fork Gp-Pallet -Kit
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
195-8545 Fork Gp-Pallet
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 2 |
| 10***04 | Suppressor As-Arc | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
195-6943 Fork Gp-Pallet
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
| 12***43 | Seal; (70-cm) | 0 |
| 19***43 | Fork Group-Pallet | 1 |
243-0003 Fork Gp-Pallet -Kit
| 22***09 | Glass-Cab; (Door) | 1 |
| 22***10 | Glass-Cab; (Door) | 1 |
| 22***12 | Glass-Cab; (Door) | 1 |
243-0001 Fork Gp-Pallet -Kit
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
165-8737 Fork Gp-Utility
| 03***28 | Grommet | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
165-8739 Fork Gp-Utility
| 03***28 | Grommet | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
165-8732 Fork Gp-Utility
| 03***28 | Grommet | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
285-6105 Fork Gp-Utility
| 03***28 | Grommet | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
230-5670 Frame Gp-Blade
| 23***70 | Frame Group-Blade | 1 |
| 27***32 | Seal | 1 |
| 28***59 | Frame As | 1 |
279-5358 Frame Gp-Fork -Industrial
| 23***26 | Frame As-Window; (Rh) | 1 |
| 23***29 | Kit-Latch | 1 |
| 23***01 | Hinge | 1 |
279-5352 Frame Gp-Fork -Industrial
| 14***71 | Louver As | 6 |
| 17***05 | Screw-Button Head; (M6 X 1.0 X) | 8 |
| 21***96 | Duct; (Crossover) | 1 |
285-6116 Grapple & Cylinder Gp-Utility
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 2 |
| 11***87 | Start Switch Assembly; (Key)(Engine) | 1 |
165-8734 Grapple & Cylinder Gp-Utility
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 23***28 | Frame As-Window; (Lh) | 1 |
| 23***29 | Kit-Latch | 1 |
165-8740 Grapple Gp-Utility
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 2 |
| 15***97 | Panel | 1 |
215-3960 Handle & Pin Gp-Coupler -Lh
| 15***61 | Plate As-Fops | 1 |
| 15***83 | Spring As-Gas; (Locking) | 1 |
| 21***60 | Handle & Pin Group-Coupler; -Lh | 1 |
258-2536 Handle & Pin Gp-Coupler -Rh
| 25***36 | Handle & Pin Group-Coupler; -Rh | 1 |
| 28***14 | Handle | 1 |
| 29***37 | Nut | 1 |
215-3961 Handle & Pin Gp-Coupler -Rh
| 21***61 | Handle & Pin Group-Coupler; -Rh | 1 |
| 21***77 | Handle | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
258-2538 Handle & Pin Gp-Coupler -Lh
| 15***53 | Grommet | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
215-3958 Handle Gp-Coupler -Lh
| 15***53 | Grommet | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
215-3959 Handle Gp-Coupler -Rh
| 21***59 | Handle Group-Coupler; -Rh | 1 |
| 21***93 | Heater Group-Cab | 1 |
| 7X***37 | Bolt-Plt; (M8 X 1.25 X 35) | 4 |
319-9480 Kit-Roading Plate & Mounting -Bucket
| 18***15 | Clip | 10 |
| 20***98 | Knob-Control; (Temperature Select) | 1 |
| 21***99 | Seal | 1 |
177-9152 Kit-Roading Plate & Mounting -Bucket
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***59 | Lines Group-Hydraulic Fan; -Without A/C | 1 |
| 21***86 | Lines Group-Heater | 1 |
215-3957 Link Gp-Coupler
| 00***10 | Elbow | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 14***71 | Louver As | 6 |
258-2535 Lock Gp-Quick Coupler -Rh
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 23***29 | Lockwasher | 2 |
258-2537 Lock Gp-Quick Coupler -Lh
| 21***59 | Lines Group-Hydraulic Fan; -Without A/C | 1 |
| 21***19 | Cover Group-Console; -Without Air Conditioner, Heater | 1 |
| 22***44 | Panel Group-Side; -Without Heater Or A/C | 1 |
175-4238 Lock Gp-Quick Coupler -Mechanical
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
184-6097 Plate Gp-Roading -Lh
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
184-6098 Plate Gp-Roading -Rh
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
177-1983 Spring Gp-Blade
| 12***37 | Seal | 0 |
| 17***83 | Spring Group-Blade | 1 |
| 18***11 | Plate As | 1 |
188-7733 Step Gp-Material Handling Arm
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 18***33 | Step Group-Material Handling Arm | 1 |
| 19***63 | Lever Group-Hand Control; (Governor) | 1 |
173-7407 Stop Gp-Bucket -Utility
| 17***07 | Stop Group-Bucket; -Utility | 1 |
| 21***57 | Insulation | 1 |
| 21***59 | Liner-Rear Wall | 1 |
116-2001 Strainer Gp-Water
| 11***01 | Strainer Group-Water | 1 |
346-1834 Tank & Mtg Gp-Water -Kit
| 21***84 | Mirror As | 1 |
| 34***34 | Tank & Mtg Group-Water; -Kit | 1 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 1 |
252-0386 Tank & Mtg Gp-Water -Kit
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 15***68 | Adapter | 1 |
| 17***20 | Strap-Dual Clamp | 1 |
166-2551 Tank Gp-Water
| 16***51 | Tank Group-Water | 1 |
| 28***70 | Mirror As; (Rear View) | 1 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 1 |
141-4999 Tooth Gp-Uni
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***99 | Tooth Group-Uni | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 10 |
C2.2 serial number reference
On a bare C2.2 industrial engine the ID/serial plate sits on the engine block or valve cover near the fuel system, in the same general spot used across Cat's small industrial-engine line; on a packaged generator set, a separate package-serial plate is mounted on the generator end or control skid rather than the engine itself. Either way the serial number opens with a three-character prefix (for example G7M) followed by a five-digit sequence number stamped right after it (G7M00001); that prefix is what a dealer parts/service lookup uses to pull the correct build book and confirm exact engine spec, generator pairing, and coverage dates.
| Prefix | Identifies | Notes |
|---|---|---|
| C4M | Industrial engine | Build-book prefix for the C2.2 industrial diesel. Confirmed against an independent serial-prefix lookup table plus a parts-catalog listing (fuel filter/lines group) scoped to C2.2 Industrial Engine C4M00001-UP. Used on OEM/pump/compressor/welder-set applications, not a specific machine chassis. |
| G7M | Industrial engine | Serial range starts at G7M00001 and up. The factory service manual for this prefix is a combined small-engine book that also spans C0.5, C0.7, C1.1, C1.5 and C1.6 industrial engines (C2.2 covers the 3024C/3024CT variants) - confirm displacement/cylinder count against the engine nameplate before assuming C2.2. |
| JAW | Generator set, marine | Marine generator-set package serial prefix for C2.2-powered units (JAW00001-UP), confirmed on a parts catalog scoped to "C2.2 Marine-Generator Set Engine, powered by C2.2 Engine." Cat's C2.2 marine genset line spans roughly 18-21.5 ekW (50/60 Hz) naturally aspirated, with a turbocharged C2.2T variant rated higher; confirm exact rating against the nameplate. |
| JK8 | Generator set | Genset package prefix tied to a C2.2-powered unit on a parts-catalog listing. Exact kW rating, region and years not documented - confirm with dealer. |
| TY2 | Generator set | Genset package prefix with parts-catalog coverage for a C2.2-powered unit. Exact kW rating, region and years not documented - confirm with dealer. |
| NCB | Generator set | Parts-catalog serial range (NCB00001-UP) for a C2.2-powered generator set, listed across multiple kVA ratings. Confirm with dealer for the exact kVA/voltage build on a given unit. |
| GBE | Generator set | Parts-catalog serial range (GBE00001-UP) for a C2.2-powered generator set, confirmed on a parts listing scoped to "C2.2 Generator Set." Exact kW rating and years not documented beyond the prefix-to-model mapping - confirm with dealer. |
| SMF | Generator set | Parts-catalog serial range (SMF00001-UP) tied to a C2.2-powered generator set in roughly the 18-22 ekW class. Single-source coverage - confirm with dealer. |
| C8Z | Industrial engine | Prefix appears on an electrical-and-hydraulic schematic manual scoped to the C2.2 industrial engine (C8Z00001-UP), and separately on a parts-catalog water-pump/V-belt group listing for the same range. Configuration and years not documented beyond that - confirm with dealer. |
Frequently asked questions
What engine is the Caterpillar C2.2?
It's a standalone Cat industrial diesel, not a machine - a 2.2 L (135 in3), 4-cylinder, inline, cast-iron-block engine built for OEM integration into pumps, generator sets, compressors, and similar equipment. Two generations exist under the same C2.2 name: an earlier mechanical/indirect-injection engine offered naturally aspirated, turbocharged, or turbocharged-aftercooled, and a later electronic common-rail/direct-injection engine offered turbocharged or turbocharged-aftercooled only, with Tier 4 Final/Stage V emissions hardware.
What is the C2.2's operating weight?
The C2.2 has no operating weight in the machine sense - it's a bare engine, not a rolling chassis, so there's no travel, dig, or lift spec tied to it. Net dry weight for the basic engine alone runs about 184-194 kg (406-428 lb) on the mechanical generation and about 230 kg (507 lb) on the electronic generation, before any OEM-added radiator, aftertreatment, or mounting hardware. If you need a specific host machine's operating weight - for example a 226D3 or 239D3 that happens to run this engine - that figure belongs to that machine's own spec sheet, not to the engine.
What replaced the Caterpillar C2.2?
No publicly documented successor designation was found for the C2.2 as a standalone industrial engine - Cat's own product pages still list it as a current model in the industrial diesel lineup. Where it's fitted as a machine powerplant, current-generation hosts such as the 226D3 and 239D3 continue to run the same C2.2 engine family, just the later electronic common-rail generation, rather than switching to a different engine number. Confirm with your Cat dealer before assuming any newer-numbered engine is a direct replacement.
What C2.2 owners discuss
What's the practical difference between the earlier C2.2 and the later common-rail C2.2?
Field techs split this engine into two eras by fuel system, not by badge alone. Early production ran a mechanical injection pump (the same architecture sold under the older 3024C designation before Cat carried it forward as C2.2), feeding a direct-injection cylinder set. The later generation moved to a full electronic common-rail system with its own ECM, meeting Tier 4 Final/Stage V-equivalent emissions and, on some installations, a diesel particulate filter. Power ratings vary by application and emissions certification even within one generation, so don't assume two machines with the same badge share the same output. Before ordering a long block or a rebuild kit, confirm which fuel system is actually fitted — mechanical-pump and common-rail parts are not interchangeable.
What fuel-system problems come up most with the mechanical-pump generation, and is any of it safety-critical?
Owners report fuel weeping around the delivery valves, usually traced to hardened O-rings, and black smoke that eases when a line is cracked open at speed — both point to a sticking delivery valve or worn pump plunger rather than bad fuel. The safety item: after any injection pump teardown, some engines have come back refusing to shut off at the key, running at high idle regardless of the shutoff control. That's a misaligned governor linkage or shutoff-solenoid arm reassembled wrong, not a fuel-quality fault, and it will not resolve itself. Have your dealer or a qualified diesel fuel shop verify governor and shutoff-linkage engagement after any pump service before returning the machine to work.
Are there known factory-era quirks worth checking on an older unit?
Early production of this engine family shipped with two issues later addressed as running changes: a head gasket prone to premature failure, and an oil pickup tube that could starve oil pressure at low sump levels. Both were corrected years into the production run. On an older unit, don't assume the fix is already in place — if oil pressure reads marginal at idle or the coolant needs frequent topping off, check the pressure with a mechanical gauge and pull an oil sample before ruling out these older-era faults.
What electrical or sensor issues show up on the later emissions-regulated generation?
On the common-rail, filter-equipped generation, rough running and fuel-knock symptoms often trace back to the rail pressure sensor circuit — chafed or corroded harness connections at the sensor are a frequent find, not a bad sensor itself. Regeneration cycles bring their own complaints: idle speed hanging high during a regen, or regen warnings that won't clear. Both usually come down to fuel or oil that doesn't meet the low-sulfur spec, or an air or oil leak feeding into the exhaust system upstream of the filter. Chase the leak or the fluid spec first; swapping the sensor rarely fixes a regen complaint on its own.
What causes overheating, turbo smoke, or hard starting on this engine?
Overheating is usually simple — low coolant, a plugged radiator core, or a failing water pump — but left running it will warp the head and take the gasket with it, so it's worth chasing early rather than topping off and hoping. Heavy black smoke under load points first to a failing turbocharger (check for shaft play, oil weeping at the compressor housing, or nicked blades) or a dirty air filter, before the fuel system gets blamed. White smoke paired with an oily smell and hard, prolonged cranking is the classic sign of worn piston rings and blow-by; a compression or cylinder leak-down test confirms it quickly rather than guessing at glow plugs first.
Does this engine get swapped for a different brand, and is the swap straightforward?
Yes — because of the shared design heritage, a same-displacement engine from the original architecture's other badge is a documented drop-in path when sourcing a replacement for an older mechanical-pump unit, and it's a common enough job that mechanics discuss it openly. The catch is mechanical, not electrical: seating the replacement against the driveline spline can be fussy, and techs describe carefully rocking and turning the crank by hand to walk the spline together rather than forcing it. Budget real shop time for this step rather than assuming it seats in minutes.
What should I check when buying a used C2.2, whether it's a standalone engine or fitted in a machine?
Pull hours from the mechanical meter or the ECM on common-rail units and cross-check against oil and coolant condition — heavy soot in the oil or a milky coolant sheen tells a longer story than the hour meter alone. Confirm which fuel system is actually fitted, since that decides what diagnostic tools and parts you'll need going forward, and ask directly about injection pump or turbo history; a recent pump reseal with no mention of a follow-up shutoff-linkage check is worth a second look. If it's an installed unit, ask about any overheating events and check for a warped head or chronic coolant top-ups, and pull a fluid sample if the seller can't produce recent service records. Have your dealer verify governor/shutoff function and, on common-rail units, rail pressure readings before you rely on the machine for daily work.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar C2.2. Related factory variants of the same model family:
C2.2C2.2C2.2
Need a specific C2.2 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.