Caterpillarengine - machine(no series)
Caterpillar C-12
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar C-12 is a 12.0 liter (732 cu in) inline six-cylinder, four-stroke diesel engine, not a self-propelled machine but a power unit built for on-highway trucks, industrial equipment, and marine propulsion. It uses a cast iron block and cylinder head, direct fuel injection, and a turbocharged, air-to-air aftercooled induction system, with electronically controlled unit injectors on later ratings. Bore and stroke measure 130 mm x 140 mm (5.10 in x 5.90 in). Net dry weight for the base long block runs close to 940 kg (2,070 lb), though marine and industrial packages with heat exchangers, marine gears, or auxiliary drives add mass beyond that baseline. Caterpillar built the C-12 from the mid-1990s through the late 2000s, offering ratings from roughly 305 hp up to 505 hp (227 kW to 377 kW) depending on governed speed, aspiration, and duty cycle, with peak torque on the higher outputs reaching around 1,650 lb-ft (2,237 N·m) at 1,200 rpm; exact figures vary by configuration and model year. It arrived in Caterpillar's on-highway lineup alongside the larger 3406E and took over mid-range duty-cycle work, and Caterpillar offered it as a straight truck engine, an industrial and generator-set power unit, and a marine propulsion engine with keel-cooled or heat-exchanger-cooled variants.
Caterpillar reworked the C-12 significantly over its production run. Early ratings used mechanically timed unit injection; from 2003 the on-highway version adopted ACERT technology, adding variable valve actuation and a diesel oxidation catalyst to meet tightening emissions rules, which changed idle behavior, cooling demands, and parts commonality with earlier units. On-highway production wound down as Caterpillar shifted mid-range duty to the C-13, while the C-15 continued the role the 3406E had held at the top of the range; Caterpillar kept supporting marine and industrial C-12 packages afterward with their own service literature even as on-highway output ended. In the used market, the C-12 remains common in Class 8 daycabs, vocational trucks, motorhomes, and workboats built through the 2000s, valued for a lighter block than the 3406E or C-15 and for parts and service knowledge that overlaps with the wider C-series lineup. Buyers still need to match the specific rating plate, injector hardware, and emissions configuration before assuming interchangeability, since power, torque, and fuel system components shifted across the engine's run.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar C-12 specifications
Engine
| Model / family | Cat C-12 (C12), 12.0 L inline-6 diesel. On-highway truck version built Nov 1994 to Sept 2009 (~138,000 units). Same base engine continues as a marine commercial propulsion and industrial power unit; ACERT electronic controls added from 2003, diesel particulate filter and regeneration system added for 2007 on-highway emissions. |
| Configuration | Inline-6, 4-stroke-cycle diesel, cast-iron block and head, 2 valves per cylinder (12 total) |
| Displacement | 12.0 L (732 in3) |
| Bore x stroke | 130 x 150 mm (5.1 x 5.9 in) |
| Aspiration | Turbocharged, air-to-air aftercooled (on-highway); turbocharged-aftercooled on marine/industrial builds |
| Fuel system | Electronically controlled unit injection; HEUI (hydraulically actuated) on original design, changed to cam-driven MEUI on later (2007-era) on-highway builds |
| Gross power - on-highway truck ratings | Multiple factory ratings from about 335 hp (250 kW) up to 505 hp (377 kW), commonly quoted top rating 430-445 hp (321-332 kW) at 1600-1800 rpm |
| Gross power - marine commercial propulsion | 340-490 bhp (254-366 kW) at 1800-2300 rpm, continuous to maximum continuous duty |
| Gross power - marine high-performance rating | Up to about 705 bhp / 715 mhp (526 kW) at 2300 rpm on the high-output propulsion rating |
| Cylinders | 6 |
| Emissions tier | On-highway: pre-ACERT through the 1990s/2002, ACERT electronic controls from 2003, diesel particulate filter and regen system added for 2007 EPA on-highway compliance. Marine/industrial ratings certified to EPA Tier 2 commercial and IMO I/II, varies by specific rating and duty cycle. |
Weights
| Dry weight - on-highway/industrial configuration | About 939 kg (2,070 lb) |
| Dry weight - marine propulsion configuration | Minimum dry weight about 1,174 kg (2,588 lb); heavier with marine gear and ancillaries fitted |
| Note | Weight varies by configuration - truck/industrial base engine is packaged lighter than marine propulsion builds with reduction gear and raw-water cooling |
Dimensions
| Length x width x height - on-highway/industrial base engine | 1,285 x 906 x 1,063 mm (50.6 x 35.7 x 41.9 in) |
| Length x width x height - marine propulsion package | 1,574 x 968 x 1,003 mm (62.0 x 38.1 x 39.5 in) |
| Note | Dimensions vary by configuration/accessory package; marine and industrial builds add gear housings and mounting brackets not present on the bare truck engine |
Performance
| Operating speed range | 1,200-2,100 rpm on-highway rating; governed/rated speed 1,800-2,300 rpm on marine and industrial duty ratings |
| Peak torque | Ranges roughly 1,250-1,650 lb-ft (1,695-2,237 Nm) depending on factory rating; top on-highway rating is about 1,650 lb-ft (2,237 Nm) at 1,200 rpm |
| Torque rise | Up to about 53 percent on the higher on-highway ratings |
| Rotation | Counterclockwise from the flywheel end |
Service capacities (summary)
| Fuel tank | Not applicable - engine only, fuel tank is supplied by the chassis/vessel/equipment builder, not the engine package |
| Engine oil system | About 36 L (9.4 US gal) refill capacity on the on-highway configuration |
| Cooling system | About 10.2 L (2.7 US gal) coolant capacity on the on-highway configuration; marine keel/heat-exchanger cooled versions vary by installation |
| Hydraulic system | Not applicable - the C-12 is a power source, not a hydraulic machine; any hydraulic circuit belongs to the host equipment |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
C-12 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 30 to 34 L (32 to 36 US qt) depending on oil pan style (deep, shallow, or center sump); add about 2.5 L (2.6 US qt) if an auxiliary bypass oil filter is fitted | Cat DEO (Diesel Engine Oil) multigrade is preferred. Acceptable alternates are API CH-4, CG-4, or CF-4 multigrade oil, or an oil meeting the EMA LRG-1 guideline. Do not use single-grade oil. Select viscosity by expected ambient temperature at cold start: SAE 0W20 for -40C to 10C, 0W30 for -40C to 30C, 0W40 for -40C to 40C, 5W30 for -30C to 30C, 5W40 for -30C to 40C, 10W30 for -20C to 40C, and 15W40 for -15C to 50C. Shorten the oil change interval where fuel sulfur is high, altitude exceeds 1830 m, or load factor is severe. |
| Cooling system (engine jacket) | about 10.2 L (10.8 US qt) for the engine block alone; total system volume depends on the radiator, aftercooler, and piping fitted by the machine builder and is not fixed by the engine factory | Cat ELC (Extended Life Coolant) is preferred, used as a 1:1 premix with water; service life is 6000 hours or six years with one ELC Extender addition at the midpoint of that interval. Cat DEAC (Diesel Engine Antifreeze/Coolant) is an acceptable alternative on a 3000 hour or three year service life, with periodic supplemental coolant additive (SCA) testing and topping. A minimum 30 percent glycol concentration is required on air-to-air aftercooled versions of this engine to prevent water pump cavitation. |
| Fuel tank | not fixed by the engine builder; this is a bare industrial engine and the fuel tank is sized and supplied by the machine builder | No. 1-D or No. 2-D distillate diesel fuel of at least 40 cetane for the direct-injection fuel system. In cold climates use No. 1 diesel or a No. 1/No. 2 blend, and add a fuel heater, to control cloud point and pour point down to about -54C where extreme-cold distillate fuels are used. |
| Grease (chassis and bearing points) | not applicable; grease is applied fitting by fitting, no reservoir capacity is specified | General-purpose points: Multipurpose Lithium Complex Grease (MPGL). Heavily loaded pin joints and journal bearings: Multipurpose Lithium Complex Grease with Molybdenum (MPGM). High-temperature bearings such as starters, alternators, and fan drives: Special Purpose Grease (SPG). For extreme cold or extreme heat, use the premium synthetic grease lines rated for those ranges. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar C-12 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 15,000 h |
|
Servicing the C-12 beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S oil sampling at every oil change to track soot loading and wear metals across the C-12's cast iron main and rod bearings before failure shows up as low oil pressure. Pair it with coolant sampling; the C-12's cooling passages and aftercooler core scale quickly if supplemental coolant additive or Cat ELC concentration drifts. Watch turbocharger boost and exhaust temperature trends, since a slow compressor wheel imbalance on this engine shows up as a fuel economy loss well before a bearing failure.
Corrective & Common Repairs
Fuel injector wiring harness chafe and injector solenoid failures are common wear points on ACERT-era C-12 units, showing up as misfire or hard start. Check the primary fuel filter/water separator first on any low-power complaint; water contamination degrades the unit injectors quickly. Turbocharger oil seal leaks and a sticking aftercooler condensate drain valve both mimic power loss symptoms, so inspect boost hardware before pulling the head. Water pump seal weep is normal in small amounts and should not be mistaken for a head gasket leak.
Overhaul & Rebuild Points
A C-12 rebuild replaces main and rod bearings, piston rings, crankshaft seals, camshaft and gear-train bushings, and the electronic unit injectors as a set. Measure crankshaft journal taper and out-of-round before deciding between a regrind and an exchange crank, and magnetic-particle inspect the crankshaft and camshaft any time they come out. Reuse of the block and cylinder head is common on this engine when journals and liner bores check within Caterpillar's reusability limits, keeping overhaul cost well under a full engine replacement.
Seasonal & Environment Servicing
Cold starts stress the C-12's turbocharger and valve train; use the correct cold-weather fuel blend and let oil pressure stabilize before applying load. In hot, dusty vocational or off-highway duty, shorten air cleaner and aftercooler core cleaning intervals, since restricted airflow drives up exhaust temperature and boost on this engine faster than on naturally aspirated designs. Marine-packaged C-12s need sea water strainer and zinc anode checks on a set schedule to protect the heat exchanger from salt and silt fouling.
C-12 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1R-0762 | Filter As-Fuel | Fuel system service | Check fitment → |
| 129-0375 | Bowl As-Water Collection | Fuel system service | Check fitment → |
| 133-5673 | Element | Fuel system service | Check fitment → |
| 203-2423 | Kit-Heating Element | Air intake service | Check fitment → |
| 231-4486 | Filter Element As-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
C-12 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 21 (5V Sensor Supply) | ECM 5-volt sensor reference supply reading below normal. | Shorted sensor supply wire, corroded connector, or a failed sensor pulling down the shared 5V circuit (boost, throttle, or coolant level sensors share this supply). | Check active/logged status on the diagnostic tool, then disconnect sensors on the 5V circuit one at a time to isolate the short; inspect connectors for corrosion. |
| 24 (CID 100, FMI 3/4) | Engine oil pressure sensor circuit reading voltage above or below the normal range. | Open or shorted sensor wiring, corroded connector pins, or a failed oil pressure sensor. | Inspect wiring and connector at the oil pressure sensor, verify sensor supply voltage, replace sensor if the circuit tests bad. |
| 27 (CID 110, FMI 3/4) | Engine coolant temperature sensor circuit reading voltage above or below the normal range. | Open or shorted sensor circuit, corroded connector pins at the ECM, or a failed coolant temperature sensor. | Inspect sensor wiring and connector, test sensor resistance against spec, replace sensor if out of range. |
| 34 (CID 190 or 320, FMI 2/11) | Loss of signal from the primary or secondary engine speed/timing sensor. | Damaged or misadjusted speed/timing sensor, broken harness between sensor and ECM, or excessive sensor air gap. | Check sensor air gap and mounting, inspect harness for chafe or breaks, reset gap to spec and clear the code. |
| 46 (Low Oil Pressure Warning/Derate/Shutdown) | Engine oil pressure has dropped below the calibrated warning, derate, or shutdown threshold for current rpm. | Low oil level, worn oil pump, plugged filter or pickup screen, or a failing pressure sensor giving a false low reading. | Stop the engine, check oil level and filter condition, verify actual pressure with a mechanical gauge before returning to service. |
| 25 (CID 102 or 273) | Boost/intake manifold pressure reading out of range or above the calibrated limit. | Faulty boost pressure sensor, plugged or leaking sense line, or a genuine intake/turbo restriction driving high boost. | Inspect the pressure sensor sense line for kinks or leaks, check charge air piping for restriction, verify sensor reading against a shop gauge. |
| 111 (Coolant Level, FMI 2/3) | Coolant level sensor signal erratic or reading voltage above normal. | Low coolant level, a failing coolant level sensor/probe in the surge tank, or a wiring fault at the sensor connector. | Check coolant level and top off if low, inspect the level sensor and connector, bleed the cooling system if air is trapped. |
| 53 (CID 254, FMI 12) | Electronic Control Module internal fault detected during self-check. | Internal ECM hardware failure or corrupted personality module data. | Cycle key power and recheck; if the code stays active, the ECM likely needs reflashing or dealer replacement. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
C-12 attachments & work tools
Flywheel & clutch coupling (truck arrangement)
On-highway installations use an SAE No.1 flywheel (113-tooth ring gear) with an SAE No.1 flywheel housing on a 10-degree slant pad, standard SAE rotation. This size accepts single- or twin-plate pull-type clutches in the 380-395 mm (15-15.5 in) class paired with Eaton Fuller manual transmissions; some truck OEM specs use a 356 mm (14 in) clutch instead, so match clutch diameter to the chassis builder's spec, not the engine alone.
Industrial PTO / auxiliary pump drive
Industrial arrangements offer an SAE A auxiliary drive pad with an 11-tooth spline, rated to roughly 77 N·m (57 lb-ft), turning at about 1.41x engine speed, counterclockwise viewed from the rear looking into the drive. This pad is the standard mounting point for a hydraulic pump or similar accessory drive on pump, compressor, and other stationary industrial builds.
Rear engine power take-off (REPTO)
A factory rear-engine-PTO (REPTO) flywheel-housing arrangement is offered on this engine family so a rear-mounted pump, winch, or auxiliary drive can be added without swapping to a special housing after the fact. Confirm the REPTO housing was ordered on the specific arrangement, since not all built units include it.
Marine propulsion cooling packages
Marine ratings are offered with two cooling circuits: a heat-exchanger circuit (integral heat exchanger/expansion tank, removable copper-nickel tube bundle, gear-driven raw-water pump with rubber impeller) for open-circuit raw-water cooling, and a keel-cooled combined-circuit option with a pipe-thread flange kit for closed-loop cooling on commercial vessels that avoid raw-water intake. Cooling-package choice is tied to the vessel installation, not interchangeable in the field without the matching kit.
Generator set (genset) packaging
This engine has been packaged into stationary and trailer-mounted generator sets in the mid-continuous-power class, valued for load response and fuel efficiency under continuous duty. Genset kW/frequency ratings (50 Hz vs 60 Hz, prime vs standby) are set by the specific generator-set arrangement and control package rather than the bare engine rating, so confirm current package availability and output with the dealer since newer Cat electric-power lineups have moved to later engine families for new-build sets.
Accessory drive & cooling fan options
A front accessory-drive bracket carries the alternator, A/C compressor pad, and fan hub as a combined mounting point; a compatible bracket from the sibling C13 industrial engine has also been adapted onto this front-end for the same accessory group. Fan drive is offered with a single-speed or two-speed (Horton-type) fan clutch depending on the cooling-package spec, and truck arrangements use an air-to-air aftercooled charge-air circuit as standard.
Truck vs. industrial vs. marine arrangement differences
The same 12.0 L (732 cu in) inline-six base engine is factory-built into distinct arrangements for on-highway trucks (air-to-air aftercooled, electronic control via ADEM III/IV), industrial/pump-drive units (auxiliary PTO pads, REPTO housings), and marine propulsion (heat-exchanger or keel-cooled, with high-output marine ratings reaching roughly 520 kW/700 hp at 2300 rpm on some performance ratings). Attachment and accessory compatibility is specific to the ordered arrangement number, so parts are not automatically interchangeable across truck, industrial, and marine builds.
All C-12 assemblies by section
Every catalogued assembly group for the Caterpillar C-12. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
185-1893 Aftercooler & Mounting Gp
| 10***92 | Washer; (4.8x25x2-mm Thk) | 5 |
| 12***27 | Seal; (95-cm Each) | 0 |
| 13***85 | Rivet-Pop | 5 |
212-5958 Air Cleaner Gp
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 17***12 | Air Cleaner Group | 1 |
| 17***13 | Bracket As | 1 |
174-1612 Air Cleaner Gp
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 17***12 | Air Cleaner Group | 1 |
| 1N***03 | Clip Assem. | 1 |
177-2202 Elbow Gp-Air Inlet -Aftercooler
| 10***25 | Gasket; (Air Inlet Manifold)(Intake Manifold Inlet) | 1 |
| 17***02 | Elbow | 1 |
| 17***02 | Elbow Group-Air Inlet; -Aftercooler | 1 |
184-1671 Lines Gp-Aftercooler Air
| 12***29 | Clamp; (V-Band) | 1 |
| 12***00 | Adapter | 1 |
| 17***81 | Hose | 2 |
148-2142 Manifold Gp-Exhaust
| 10***13 | Gasket | 6 |
| 11***15 | Stud-Taperlock; (M10x85-mm Oal) | 12 |
| 14***42 | Manifold Group-Exhaust | 1 |
116-5405 Manifold Gp-Inlet
| 11***05 | Manifold Group-Inlet | 1 |
| 11***06 | Manifold; (Inlet) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
212-5959 Muffler & Mounting Gp
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 1 |
| 14***80 | Clamp Assem. | 1 |
| 19***92 | Clip As | 1 |
226-1187 Precleaner Gp
| 11***05 | Adapter Group-Air Cleaner | 1 |
| 13***80 | Precleaner As; (Air) | 1 |
| 17***15 | Clamp | 1 |
214-6091 Turbocharger Gp
| 11***87 | Bolt; (M6x0.04x10.4-mm)(6mm X 0.04 Thd) | 1 |
| 12***53 | Clamp As; (Turbine) | 1 |
| 13***30 | Cover As-Compressor | 1 |
208-5871 Turbocharger Gp
| 1S***95 | Gasket-Turbocharger To Manifold; Gasket Turbocharger To Manifold | 1 |
| 20***71 | Turbocharger Group | 1 |
| 21***91 | Turbocharger Group | 1 |
Basic Engine
133-7031 Air Compressor Gp
| 00***43 | Elbow; (12.7mm Id) | 1 |
| 00***58 | Elbow-Flared | 1 |
| 03***31 | Elbow-To Tube As | 1 |
234-2413 Air Compressor Gp
| 00***43 | Elbow; (12.7mm Id) | 1 |
| 00***58 | Elbow-Flared | 1 |
| 03***31 | Elbow-To Tube As | 1 |
131-6679 Air Compressor Gp
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 6 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 12 |
| 10***16 | Key-Woodruff | 1 |
167-0017 Belt Tensioner Gp
| 12***37 | Seal-O-Ring (Id=10.8mm); (Id=10.80mm) | 2 |
| 12***64 | Stud; (M12x1.75x86.3-mm Oal) | 2 |
| 12***90 | Pulley; (8-Groove)(Alternator) | 1 |
234-2412 Belt Tensioner Gp
| 12***37 | Seal-O-Ring (Id=10.8mm); (Id=10.80mm) | 1 |
| 12***64 | Stud; (M12x1.75x86.3-mm Oal) | 2 |
| 14***11 | Pulley Group-Idler | 1 |
171-3062 Camshaft Gp
| 11***59 | Cover | 1 |
| 12***11 | Journal | 1 |
| 13***68 | Gasket; (Camshaft Cover) | 1 |
174-1762 Cover Gp-Cylinder Block
| 06***55 | Seal-O-Ring (Id=47.22mm) | 3 |
| 10***69 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 13***16 | Cover | 1 |
132-3212 Crankshaft Gp
| 12***82 | Bearing-Main; (0.51-mm Us)(.51mm U.S.) | 0 |
| 12***83 | Bearing-Main; (0.76-mm Us)(.76mm U.S.) | 0 |
| 12***84 | Bearing-Main; (0.51-mm Os)(.51mm O.S.) | 0 |
200-2054 Cylinder Block As
| 11***66 | Cap; (Bearing) | 7 |
| 17***54 | Bolt-Hex Head; (M16x160mm) | 14 |
| 20***54 | Cylinder Block As | 1 |
204-3449 Cylinder Block As
| 10***60 | Seal; (Liner) | 6 |
| 16***63 | Shim-Liner; -Cylinder | 0 |
| 16***64 | Shim-Liner; -Cylinder | 0 |
115-2983 Cylinder Block Gp
| 11***83 | Cylinder Block Group | 1 |
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 20***49 | Cylinder Block As | 1 |
179-9462 Cylinder Head As
| 10***50 | Guide-Valve; (Standard) | 24 |
| 10***34 | Guide-Valve; (0.127-mm Os Od) | 0 |
| 10***35 | Guide-Valve; (0.508-mm Os Od) | 0 |
179-9459 Cylinder Head As
| 11***02 | Sleeve; (Injector) | 6 |
| 13***06 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
| 14***52 | Insert-Valve Seat; (0.508-mm Os Od)(0.508-mm Os Od) | 12 |
148-2149 Cylinder Head Gp
| 10***50 | Guide-Valve; (Standard) | 24 |
| 10***34 | Guide-Valve; (0.127-mm Os Od) | 0 |
| 10***35 | Guide-Valve; (0.508-mm Os Od) | 0 |
116-1085 Cylinder Head Gp
| 11***85 | Cylinder Head Group | 1 |
| 14***49 | Cylinder Head Group | 1 |
| 18***07 | Gasket As-Cylinder Head | 1 |
174-1639 Drive Gp-Accessory
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 8 |
| 16***25 | Damper Assem. | 1 |
| 17***93 | Adapter | 1 |
116-1083 Fastener Gp-Cylinder Head
| 11***83 | Fastener Group-Cylinder Head; (Cylinder Head) | 1 |
| 12***84 | Bolt; (Hex Head) (M16x2x160mm) | 26 |
| 2S***58 | Washer-Hard; (17x29x3-mm Thk)(Engine Brake) | 26 |
174-1766 Flywheel Gp
| 17***66 | Flywheel Group | 1 |
| 22***41 | Flywheel As | 1 |
| 4N***14 | Gear; (113-Teeth)(Flywheel Starter) | 1 |
117-2750 Gear Gp-Front
| 11***50 | Gear Group-Front | 1 |
| 13***83 | Shaft | 1 |
| 13***86 | Gear As; (Idler) (71 Teeth) | 1 |
208-3730 Housing Gp-Flywheel
| 09***49 | Bolt; (M8x1.25x40-mm) | 2 |
| 19***51 | Cover; (1/2-20) | 1 |
| 1H***28 | Seal 6.3 cm(2.484 In.) I.D.; Seal--To Seal Pumps To Case | 1 |
133-7075 Housing Gp-Front
| 11***24 | Gear; (Pump Drive) (34 Teeth) | 1 |
| 13***75 | Housing Group-Front | 1 |
| 16***66 | Seal Group-Crankshaft; (Front) | 1 |
148-2063 Lifter Gp-Valve -Mechanism
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 2 |
| 12***93 | Dowel | 1 |
| 14***63 | Lifter Group-Valve; -Mechanism | 1 |
117-2748 Lifting Gp-Engine
| 11***05 | Plate; (Lifting Eye) | 2 |
| 11***48 | Lifting Group-Engine | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
161-2316 Mounting Gp-Engine
| 16***16 | Mounting Group-Engine | 1 |
| 18***66 | Shim; (0.8mm Thk) | 16 |
| 18***67 | Shim; (0.4mm Thk) | 16 |
138-2550 Mounting Gp-Fan Drive
| 12***64 | Stud; (M12x1.75x86.3-mm Oal) | 2 |
| 13***50 | Mounting Group-Fan Drive; (Short) | 1 |
| 5R***37 | Washer; (Seal) (1.27mm Thk) | 2 |
116-5408 Mounting Gp-Valve Mechanism
| 11***83 | Fastener Group-Cylinder Head; (Cylinder Head) | 1 |
| 11***08 | Mounting Group-Valve Mechanism | 1 |
| 17***68 | Bridge As-Valve; (Intake) | 12 |
174-1574 Pan Gp-Oil
| 10***08 | Gasket; (Oil Pan) | 1 |
| 12***55 | Bell As-Suction | 1 |
| 17***74 | Pan Group-Oil | 1 |
252-8692 Pan Gp-Oil -Engine
| 12***55 | Bell As-Suction | 1 |
| 14***08 | Plug As. | 1 |
| 19***16 | Adapter-Drain | 1 |
130-0863 Piston & Rod Gp
| 11***99 | Plug-Pin | 2 |
| 11***16 | Rod Assem. | 1 |
| 11***72 | Bearing-Connecting Rod | 1 |
265-3855 Plug Gp-Cylinder Block
| 26***55 | Plug Group-Cylinder Block | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
138-2028 Plug Gp-Cylinder Block
| 13***28 | Plug Group-Cylinder Block | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
174-1760 Plug Gp-Engine
| 11***35 | Connector | 1 |
| 17***60 | Plug Group-Engine | 1 |
| 3B***23 | Core Plug--Flywheel Housing Pinion Shaft Hole | 1 |
142-2011 Pulley Gp-Idler
| 12***37 | Seal-O-Ring (Id=10.8mm); (Id=10.80mm) | 1 |
| 14***11 | Pulley Group-Idler | 1 |
| 14***11 | Pulley As-Idler | 1 |
115-9397 Rocker Arm Gp
| 09***14 | Pin; (Spring) | 1 |
| 11***97 | Rocker Arm Group | 1 |
| 11***98 | Arm; (Valve Rocker) (Exhaust) | 2 |
116-1091 Seal Gp-Crankshaft
| 10***80 | Seal-O-Ring (Id=177.17mm) | 1 |
| 11***91 | Seal Group-Crankshaft; -Single Lip | 1 |
| 16***23 | Cover | 1 |
174-1625 Support Gp-Engine
| 17***25 | Support Group-Engine | 1 |
| 23***55 | Support | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 8 |
207-5900 Suppression Gp-Sound -Engine Enclosure
| 20***00 | Suppression Group-Sound; -Engine Enclosure | 1 |
| 20***01 | Panel; (Rh) | 1 |
| 20***02 | Panel; (Lh) | 1 |
117-2749 Valve Mechanism Gp -Engine
| 10***42 | Base-Valve Mechanism Cover | 1 |
| 10***67 | Pushrod; (Valve) | 12 |
| 10***68 | Pushrod-Injector | 6 |
Braking System
102-9004 Actuator Gp-Brake -Parking
| 10***04 | Actuator Group-Brake; -Parking | 1 |
| 20***14 | Air Dryer Group; -Cold Weather Operation | 1 |
| 20***25 | Hose As | 1 |
215-3005 Air Dryer Gp
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 2 |
| 10***04 | Actuator Group-Brake; -Parking | 1 |
| 11***21 | Plate As | 1 |
208-0014 Air Dryer Gp -Cold Weather Operation
| 20***89 | Kit-Cartridge; (Desiccant)(Air Dryer) | 1 |
| 20***90 | Kit-Valve; (Cutoff)(Turbo Cutoff) | 1 |
| 20***91 | Kit-Check Valve | 1 |
211-0981 Air Dryer Gp
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Actuator Group-Brake; -Parking | 1 |
8d-1690 Brake Gp-Service
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 2 |
| 10***04 | Actuator Group-Brake; -Parking | 1 |
| 11***21 | Plate As | 1 |
188-7062 Control Gp-Parking Brake
| 11***46 | Bracket As | 1 |
| 12***73 | Bolt-12 Point Head; (3/8-16x1.25-In)(3/8-16thd) | 1 |
| 15***13 | Hose As | 1 |
171-2866 Control Gp-Service Brake
| 11***91 | Adapter | 2 |
| 13***22 | Boss | 1 |
| 16***43 | Hose As | 1 |
209-9285 Lines Gp-Air Tank
| 11***37 | Valve-Quick-Release | 1 |
| 20***85 | Lines Group-Air Tank | 1 |
207-0625 Tank Gp-Air
| 16***13 | Accumulator Group-Hydraulic | 2 |
| 16***49 | Clamp | 2 |
| 18***08 | Plate As | 1 |
5d-0470 Valve Gp-Quick-Release
| 17***93 | Kit-Seal; (Hydraulic Accumulator) | 1 |
| 19***50 | Core | 1 |
| 22***67 | Valve Group-Accumulator Charging | 1 |
Cooling System
262-7138 Cooler Gp-Engine & Xmsn Oil
| 06***40 | Seal-O-Ring (Id=37.69mm) | 2 |
| 10***25 | Gasket | 1 |
| 11***17 | Core As-Engine Oil Cooler | 1 |
163-9322 Cooler Gp-Engine & Xmsn Oil
| 06***40 | Seal-O-Ring (Id=37.69mm) | 2 |
| 10***25 | Gasket | 1 |
| 11***17 | Core As-Engine Oil Cooler | 1 |
201-1054 Cooling Ar
| 17***83 | Lines Group-Hydraulic Fan; -Radiator | 1 |
| 17***61 | Fan & Motor Group | 1 |
| 18***93 | Aftercooler & Mounting Group | 1 |
184-1670 Cooling Ar
| 17***83 | Lines Group-Hydraulic Fan; -Radiator | 1 |
| 17***61 | Fan & Motor Group | 1 |
| 18***70 | Cooling Ar | 1 |
179-3261 Fan & Motor Gp
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 2 |
| 15***37 | Elbow Group | 2 |
| 17***04 | Bracket As | 1 |
230-5840 Fastener Gp-Radiator
| 23***40 | Fastener Group-Radiator | 1 |
| 3E***56 | Washer-Hard; (17.5x30x6-mm Thk) | 8 |
| 8T***40 | Bolt-Plt; (M16 X 2.0 X 60) | 8 |
215-2062 Housing & Regulator Gp
| 11***00 | Housing As-Regulator | 1 |
| 12***11 | Stud; (M8x1.25-Thd)(M8x1.25 Thd Both Ends) | 2 |
| 21***62 | Housing & Regulator Group | 1 |
262-7139 Housing & Regulator Gp
| 12***11 | Stud; (M8x1.25-Thd)(M8x1.25 Thd Both Ends) | 2 |
| 24***33 | Regulator-Water Temperature; (98-Deg C)(Water, Coolant) | 1 |
| 25***62 | Manifold | 1 |
215-2063 Housing & Regulator Gp-Mtg
| 11***97 | Gasket | 4 |
| 21***63 | Housing & Regulator Group-Mtg; -Housing, Regulator | 1 |
| 26***39 | Housing & Regulator Group | 1 |
206-0400 Lines Gp-Power Train Cooler
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
| 14***05 | Adapter Group | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
116-5460 Lines Gp-Water -Bypass
| 10***08 | Flange | 1 |
| 10***95 | Tube | 1 |
| 11***60 | Lines Group-Water; -Bypass | 1 |
255-5307 Lines Gp-Water -Inlet Elbow
| 10***35 | Gasket | 1 |
| 25***77 | Elbow-Water Pump | 1 |
| 25***07 | Lines Group-Water; -Inlet Elbow | 1 |
118-2808 Lines Gp-Water -Water Pump Inlet Elbow
| 10***35 | Gasket | 1 |
| 10***85 | Elbow; (Water Pump) | 1 |
| 11***08 | Lines Group-Water; -Water Pump Inlet Elbow-Pump | 1 |
186-4156 Lines Gp-Water
| 00***14 | Coupling-Pipe | 1 |
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 1 |
| 15***25 | Valve-Fluid Sampling | 1 |
176-7000 Pump Gp-Water
| 10***10 | Gasket | 1 |
| 14***88 | Seal As; (Water Pump) | 1 |
| 17***95 | Cover-Pump | 1 |
117-2674 Pump Gp-Water
| 11***74 | Pump Group-Water | 1 |
| 17***00 | Pump Group-Water | 1 |
| 6V***21 | Bolt; (M8x1.25x80-mm) | 2 |
221-8000 Radiator & Mounting Gp
| 10***92 | Washer; (4.8x25x2-mm Thk) | 17 |
| 12***27 | Seal; (95-cm Each) | 0 |
| 13***85 | Rivet-Pop | 17 |
211-9028 Radiator Gp
| 00***14 | Coupling-Pipe | 1 |
| 1P***97 | Valve-Drain; (Radiator) | 1 |
| 21***71 | Radiator Group; -Folded Core | 1 |
211-3471 Radiator Gp -Folded Core
| 21***70 | Tank As | 1 |
| 21***71 | Radiator Group; -Folded Core | 1 |
| 21***72 | Tank As-Radiator | 1 |
Electrical And Starting System
3e-6328 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
123-6449 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***49 | Alarm Group | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
233-0712 Alternator Gp-Charging
| 12***90 | Pulley; (8-Groove)(Alternator) | 1 |
| 19***59 | Guard As | 1 |
| 20***32 | Alternator Group-Charging | 1 |
233-0713 Alternator Gp-Charging
| 22***83 | Alternator Group-Charging | 1 |
| 23***13 | Alternator Group-Charging | 1 |
| 23***98 | Circuit Breaker Group; -Alternator | 1 |
200-2232 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
212-0615 Alternator Gp-Charging
| 16***57 | Bracket | 1 |
| 19***59 | Guard As | 1 |
| 20***32 | Alternator Group-Charging | 1 |
226-7683 Alternator Gp-Charging
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***44 | Coil Assem. | 1 |
260-7647 Application Gp-Power Train
| 26***47 | Application Group-Power Train | 1 |
| 30***87 | Control Group-Unprogrammed; (Transmission) | 1 |
188-5131 Battery Gp
| 15***10 | Battery; (12-Volt, 1400-Cca) | 2 |
| 17***07 | Clip | 2 |
| 18***31 | Battery Group | 1 |
9w-0742 Block Gp-Junction -Battery
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
| 8C***58 | Block Group-Junction; (Battery) | 1 |
272-2286 Bracket Gp-Mounting -Mast
| 24***03 | Bracket Group-Mounting | 1 |
| 25***44 | Film-Warning; (Blade, Do Not Climb, Read Omm) | 1 |
| 25***36 | Cable-Coiled; (Receiver) | 1 |
236-5498 Circuit Breaker Gp -Alternator
| 17***12 | Circuit Breaker As; (105-Ampere) | 1 |
| 23***98 | Circuit Breaker Group; -Alternator | 1 |
| 25***11 | Lockwasher | 2 |
201-1036 Circuit Breaker Gp -Dual
| 19***97 | Wire As | 1 |
| 20***36 | Circuit Breaker Group; -Dual-Headlights, Lightbar | 1 |
| 20***24 | Strap | 1 |
201-1038 Circuit Breaker Gp -Single
| 20***38 | Circuit Breaker Group; -Single | 1 |
| 20***24 | Strap | 1 |
| 3K***06 | Screw-Machine-Relay To Bracket | 2 |
168-4490 Control & Mtg Gp-Engine Elek
| 16***90 | Control & Mtg Group-Engine Elek | 1 |
| 16***94 | Spacer; (8.5x12.7x54.1-mm) | 2 |
| 21***49 | Control Group-Engine Electronic | 1 |
232-5990 Control & Mtg Gp-Engine Elek
| 20***88 | Control Group-Engine Electronic | 1 |
| 23***90 | Control & Mtg Group-Engine Elek | 1 |
| 6I***18 | Spacer; (8.2x12.7x28.7-mm Thk) | 4 |
209-9588 Control Gp-Engine Electronic
| 20***88 | Control Group-Engine Electronic | 1 |
| 24***07 | Control Group-Unprogrammed; -Engine | 1 |
322-3604 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 32***04 | Control Group-Engine Electronic | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
210-0849 Control Gp-Engine Electronic
| 21***49 | Control Group-Engine Electronic | 1 |
| 24***04 | Control Group-Engine Electronic | 1 |
210-0848 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 21***48 | Control Group-Engine Electronic | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
348-2379 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 2L***75 | Terminal; (14-Ga To 16-Ga, No. 8 Screw)(Relay Switch "B" & "S") | 1 |
| 2L***78 | Terminal-Ring; (14-Ga To 16-Ga, 5/16-In Screw) | 1 |
209-9587 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 20***87 | Control Group-Engine Electronic | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
240-5304 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 24***04 | Control Group-Engine Electronic | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
132-6640 Control Gp-Secondary Steering
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***40 | Control Group-Secondary Steering | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 11 |
240-5307 Control Gp-Unprogrammed
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 24***07 | Control Group-Unprogrammed; -Engine | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
230-7490 Control Gp-Unprogrammed
| 23***90 | Control Group-Unprogrammed; -Power Train | 1 |
161-0777 Converter Ar-Electrical -High Profile
| 16***77 | Converter Ar-Electrical; -High Profile | 1 |
| 17***86 | Accessory Group-Cab; -High Profile | 1 |
| 18***43 | Converter Group-Electrical | 1 |
161-0776 Converter Ar-Electrical -Low Profile
| 16***76 | Converter Ar-Electrical; -Low Profile | 1 |
| 17***85 | Accessory Group-Cab; -Low Profile | 1 |
| 18***43 | Converter Group-Electrical | 1 |
233-6659 Converter Gp-Electrical
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***33 | Plate | 1 |
| 16***35 | Plate As | 1 |
145-1297 Converter Gp-Electrical -Radio
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 14***97 | Converter Group-Electrical; -Radio | 1 |
| 20***85 | Converter Group-Electrical; (24-Volt To 12-Volt)(Air Conditioner, Heater) | 1 |
180-4643 Converter Gp-Electrical
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 18***43 | Converter Group-Electrical | 1 |
| 20***85 | Converter Group-Electrical; (24-Volt To 12-Volt)(Air Conditioner, Heater) | 1 |
167-8382 Converter Gp-Electrical
| 16***82 | Converter Group-Electrical; -Cab | 1 |
| 23***59 | Converter Group-Electrical | 1 |
| 9W***41 | Fuse; (15-Ampere) | 1 |
253-2697 Electronics Gp-Implement
| 25***97 | Electronics Group-Implement; -Grade Control | 1 |
| 31***03 | Software Group-Implement | 1 |
| 33***83 | Service Group-Implement; (Grade Control) | 1 |
198-7332 Electronics Gp-Monitor -Cat Monitoring System
| 19***32 | Electronics Group-Monitor; -Cat Monitoring System | 1 |
| 25***01 | Electronic Control Group; (Caterpillar Monitoring System)(Electronic) | 1 |
| 30***51 | Software Group-Monitor | 1 |
247-6452 Grade Control Ar
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***00 | Clip; (Tab) | 4 |
| 15***24 | Knob As; (Blade Lift, Rh) | 1 |
249-7803 Grade Control Ar-Laser -Accugrade, Advanced Tracking System
| 21***82 | Kit-Laser Target; -Grade Control | 1 |
| 22***33 | Mast Group; -Laser Receiver | 1 |
| 23***49 | Cable-Coiled; (Mast) | 1 |
249-7802 Grade Control Ar-Satellite -Accugrade, Dual Gps
| 16***02 | Mounting Group-Radio | 1 |
| 24***02 | Riser; (Angle) | 2 |
| 24***91 | Receiver Group-Satellite; -Single Gps, Ms980-Accugrade | 2 |
250-3028 Grade Control Ar-Satellite -Single Gnss
| 16***02 | Mounting Group-Radio | 1 |
| 24***02 | Riser; (Angle) | 1 |
| 24***91 | Receiver Group-Satellite; -Single Gps, Ms980-Accugrade | 1 |
131-8126 Heater Gp-Jacket Water
| 13***26 | Heater Group-Jacket Water; -120 Volt | 1 |
| 13***27 | Element As-Jacket Water Heater; (120-Volt, 1250-Watt) | 1 |
| 13***17 | Cap As-Dust | 1 |
154-7246 Heater Gp-Jacket Water
| 12***09 | Cord As-Heater Element; -240-Volt | 1 |
| 13***17 | Cap As-Dust | 1 |
| 15***81 | Element As-Jacket Water Heater; (240-Volt, 1250-Watt) | 1 |
249-5516 Heater Gp-Jacket Water
| 13***17 | Cap As-Dust | 1 |
| 23***42 | Element As-Jacket Water Heater; (120-Volt, 1250-Watt) | 1 |
| 24***16 | Heater Group-Jacket Water | 1 |
249-5511 Heater Gp-Jacket Water
| 12***09 | Cord As-Heater Element; -240-Volt | 1 |
| 13***17 | Cap As-Dust | 1 |
| 24***08 | Element As-Jacket Water Heater; (240-Volt, 1250-Watt) | 1 |
239-9362 Installation Gp-Warning Beacon
| 10***62 | Switch As; (Warning Beacon) | 1 |
| 10***32 | Plate As | 1 |
| 13***00 | Clip; (Tab) | 1 |
216-0182 Kit-Laser Target -Accugrade
| 21***82 | Kit-Laser Target; -Grade Control | 1 |
| 24***22 | Target As-Laser | 1 |
| 24***98 | Case-Plastic | 1 |
3e-6389 Lamp Gp-Dome -With Switch
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 3E***89 | Lamp Group-Dome; -With Switch-Cab, Rh, Lh | 1 |
234-4323 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***23 | Lamp Group-Flood; -Vertical Mount | 1 |
234-4324 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***11 | Lens As | 1 |
| 23***24 | Lamp Group-Flood; -24-Volt, Vertical Mount | 1 |
153-2073 Lamp Gp-Flood
| 15***73 | Lamp Group-Flood; -Cab-Extended Bolster-Rear-Blade-Moldboard | 1 |
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
234-4325 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***25 | Lamp Group-Flood; -Suspended Mount | 1 |
234-4326 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***11 | Lens As | 1 |
| 23***26 | Lamp Group-Flood; -Low | 1 |
161-3509 Lamp Gp-Head -Low Beam
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
| 16***09 | Lamp Group-Head; -Low Beam | 1 |
180-1300 Lamp Gp-Head -High Beam
| 15***49 | Lens As; (Headlight, High Beam) | 1 |
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
157-0305 Lamp Gp-Head -High Beam
| 15***05 | Lamp Group-Head; -High Beam | 1 |
| 15***49 | Lens As; (Headlight, High Beam) | 1 |
| 15***50 | Body As-Lamp | 1 |
161-0908 Lamp Gp-Head
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
| 16***08 | Lamp Group-Head; -Fog Light | 1 |
105-4849 Lamp Gp-Head & Signal -Lh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
105-4850 Lamp Gp-Head & Signal -Rh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
203-7626 Lamp Gp-Head & Signal -Rh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***49 | Lens As; (Headlight) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
203-7625 Lamp Gp-Head & Signal -Lh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***49 | Lens As; (Headlight) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
199-3368 Lamp Gp-Signal
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 19***68 | Lamp Group-Signal; -Turn | 1 |
135-0427 Lamp Gp-Signal -Park, Turn
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***27 | Lamp Group-Signal; -Park, Turn | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
135-0426 Lamp Gp-Signal -Stop, Tail
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***26 | Lamp Group-Signal; (24-Volt, Stop, Tail)(Stop/Tail) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
334-5410 Lamp Gp-Signal -Turn
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 33***10 | Lamp Group-Signal; -Turn | 1 |
235-3937 Lamp Gp-Warning Beacon -Amber, Rotating
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***37 | Lamp Group-Warning Beacon; -Amber, Rotating | 1 |
128-6983 Lamp Gp-Warning Beacon -Rotating
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***83 | Lamp Group-Warning Beacon; -Rotating, Amber | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
205-7261 Lighting Ar-Flood -Front & Rear Mounted Flood
| 16***78 | Lighting Group-Flood; -Moldboard | 1 |
| 20***61 | Lighting Ar-Flood; -Front & Rear Mounted Flood | 1 |
| 20***62 | Lighting Group-Flood; -Rear | 1 |
204-6109 Lighting Ar-Flood -Moldboard-Eu
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
206-6538 Lighting Ar-Flood -Rear
| 20***51 | Wiring Group-Cab; -Moldboard-Snow | 1 |
| 20***35 | Lighting Group-Flood; -Moldboard-Rear | 1 |
| 20***38 | Lighting Ar-Flood; -Rear | 1 |
161-0770 Lighting Ar-Flood & Signal
| 16***70 | Lighting Ar-Flood & Signal; -Turn | 1 |
| 16***72 | Lighting Group-Flood; -Cab, Front | 1 |
| 16***18 | Switch Group-Light | 1 |
161-1924 Lighting Ar-Flood & Signal -Cab-Bolster
| 16***72 | Lighting Group-Flood; -Cab, Front | 1 |
| 16***24 | Lighting Ar-Flood & Signal; -Cab-Bolster | 1 |
| 18***60 | Lighting Group-Flood; -Bolster | 1 |
186-4957 Lighting Ar-Flood & Signal -Cab-Extended Bolster
| 16***72 | Lighting Group-Flood; -Cab, Front | 1 |
| 18***70 | Lighting Group-Flood; -Extended Bolster | 1 |
| 18***57 | Lighting Ar-Flood & Signal; -Cab-Extended Bolster | 1 |
188-9329 Lighting Ar-Flood & Signal -Bolster
| 16***22 | Lighting Group-Flood; -Bolster-Double Worklamps | 1 |
| 18***29 | Lighting Ar-Flood & Signal; -Bolster | 1 |
| 18***31 | Lighting Group-Signal; -Rear Turn Lamps | 1 |
197-1744 Lighting Gp-Backup
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
171-7096 Lighting Gp-Backup
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
196-8532 Lighting Gp-Flood
| 03***48 | Clip; (11.11mm .437in Id) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
185-6660 Lighting Gp-Flood -Bolster
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***78 | Switch As-Rotary; (Headlights-High/Low) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
161-1922 Lighting Gp-Flood -Bolster-Double Worklamps
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***92 | Plate | 2 |
| 10***78 | Switch As-Rotary; (Headlights-High/Low) | 1 |
192-0229 Lighting Gp-Flood -Bolster-Eu
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***78 | Switch As-Rotary; (Headlights-High/Low) | 1 |
| 10***49 | Lamp Group-Head & Signal; -Lh | 1 |
196-8559 Lighting Gp-Flood
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
204-3435 Lighting Gp-Flood -Moldboard-Rear
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
161-0772 Lighting Gp-Flood
| 11***10 | Grommet | 2 |
| 13***00 | Clip; (Tab) | 2 |
| 13***27 | Lamp Group-Signal; -Park, Turn | 2 |
205-7262 Lighting Gp-Flood -Rear
| 11***10 | Grommet | 2 |
| 15***73 | Lamp Group-Flood; -Cab-Extended Bolster-Rear-Blade-Moldboard | 2 |
| 17***67 | Bracket As | 2 |
161-1021 Lighting Gp-Flood
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 4 |
203-7620 Lighting Gp-Flood
| 20***20 | Lighting Group-Flood; -Bolster | 1 |
| 20***25 | Lamp Group-Head & Signal; -Lh Mount | 1 |
| 20***26 | . Housing, Lamp Group-Head & Signal; -Rh Mount | 1 |
183-4070 Lighting Gp-Flood -Extended Bolster
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***78 | Switch As-Rotary; (Headlights-High/Low) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
161-0778 Lighting Gp-Flood
| 11***08 | Clip | 2 |
| 15***73 | Lamp Group-Flood; -Cab-Extended Bolster-Rear-Blade-Moldboard | 2 |
| 16***78 | Lighting Group-Flood; -Moldboard | 1 |
188-9331 Lighting Gp-Signal -Turn
| 18***31 | Lighting Group-Signal; -Rear Turn Lamps | 1 |
| 19***68 | Lamp Group-Signal; -Turn | 2 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 6 |
233-4253 Lighting Gp-Warning
| 10***62 | Switch As; (Warning Beacon) | 1 |
| 10***32 | Plate As | 1 |
| 13***00 | Clip; (Tab) | 1 |
161-0773 Lighting Gp-Warning -Warning Beacon
| 16***73 | Lighting Group-Warning; -Warning Beacon | 1 |
| 23***53 | Lighting Group-Warning | 1 |
| 9W***42 | Fuse; (10-Ampere) | 1 |
239-9354 Lighting Gp-Warning -Rotating
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***62 | Switch As; (Warning Beacon) | 1 |
| 10***32 | Plate As | 1 |
161-0774 Lighting Gp-Warning -Warning Beacon
| 16***74 | Lighting Group-Warning; -Warning Beacon | 1 |
| 23***54 | Lighting Group-Warning; -Rotating | 1 |
| 9W***42 | Fuse; (10-Ampere) | 1 |
226-2333 Mast Gp -Laser Receiver
| 22***33 | Mast Group; -Laser Receiver | 1 |
| 24***47 | Kit-Adapter; (Mast)(Grade Control) | 1 |
| 25***79 | Screw As | 1 |
292-0907 Mast Gp -Satellite Receiver
| 24***02 | Riser; (Angle) | 1 |
| 27***73 | Mast As; (Grade Control) | 1 |
| 27***86 | Bracket Group-Mounting; -Mast | 1 |
292-0281 Mast Gp -Laser Receiver
| 22***33 | Mast Group; -Laser Receiver | 1 |
| 23***70 | Mounting Group-Receiver; -Mast | 1 |
| 29***81 | Mast Group; -Laser Receiver | 1 |
170-5335 Motor Gp-Electric -Circulating Fan
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***35 | Motor Group-Electric; -Circulating Fan | 1 |
| 9W***52 | Pin-Connector; (14-Ga To 16-Ga) | 2 |
117-3915 Motor Gp-Electric
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
| 7X***08 | Washer-Hard; (10.2x16x2-mm Thk) | 2 |
179-8725 Motor Gp-Electric -24 Volt
| 10***41 | Starting Motor Group-Electric | 1 |
| 10***28 | Wire As | 1 |
| 17***25 | Motor Group-Electric; -24 Volt | 1 |
254-0084 Mounting Gp-Grade Control -Blade
| 25***31 | Bracket | 2 |
| 25***84 | Mounting Group-Grade Control; -Blade | 1 |
254-5961 Mounting Gp-Grade Control -Circle
| 15***39 | Nut-Weld; (M6x1-Thd)(M6x1-6h Thd) | 2 |
| 18***38 | Washer-Hard; (21x36.5x3.5-mm Thk) | 2 |
| 25***82 | Boss | 1 |
252-9228 Mounting Gp-Grade Control -Blade
| 24***00 | Bracket | 2 |
| 25***28 | Mounting Group-Grade Control; -Blade | 1 |
254-0083 Mounting Gp-Grade Control -Blade
| 24***00 | Bracket | 1 |
| 25***31 | Bracket | 1 |
| 25***83 | Mounting Group-Grade Control; -Blade | 1 |
292-0908 Mounting Gp-Mast -Laser Receiver
| 23***49 | Cable-Coiled; (Mast) | 1 |
| 24***96 | Riser As; (Mast) | 1 |
| 24***03 | Bracket Group-Mounting | 1 |
292-0302 Mounting Gp-Mast -Laser Receiver
| 23***52 | Film-Warning; (Laser Transmitter) | 3 |
| 25***44 | Film-Warning; (Blade, Do Not Climb, Read Omm) | 1 |
| 29***02 | Mounting Group-Mast; -Laser Receiver | 1 |
234-9970 Mounting Gp-Receiver -Mast
| 23***70 | Mounting Group-Receiver; -Mast | 1 |
| 23***32 | Mount-Flexible | 4 |
| 23***33 | Gasket | 2 |
245-7404 Mounting Gp-Sensor -Sonic
| 24***04 | Mounting Group-Sensor; -Sonic | 1 |
| 24***05 | Bracket As | 1 |
| 24***06 | Clamp | 1 |
250-1934 Mounting Gp-Sensor -Sonic
| 24***04 | Mounting Group-Sensor; -Sonic | 1 |
| 25***34 | Mounting Group-Sensor; -Sonic-Accugrade | 1 |
249-7804 Receiver Ar-Laser -Dual
| 23***87 | Case-Plastic | 1 |
| 23***52 | Film-Warning; (Laser Transmitter) | 3 |
| 24***96 | Riser As; (Mast) | 2 |
292-0301 Receiver Ar-Laser -Accugrade, Single
| 23***87 | Case-Plastic | 1 |
| 29***81 | Mast Group; -Laser Receiver | 1 |
| 29***85 | Receiver Group-Laser; -Accugrade, Dual | 1 |
249-7795 Receiver Ar-Laser -Single
| 23***87 | Case-Plastic | 1 |
| 23***52 | Film-Warning; (Laser Transmitter) | 3 |
| 24***96 | Riser As; (Mast) | 1 |
292-0310 Receiver Ar-Laser -Accugrade, Dual
| 22***33 | Mast Group; -Laser Receiver | 2 |
| 23***49 | Cable-Coiled; (Mast) | 2 |
| 23***70 | Mounting Group-Receiver; -Mast | 2 |
292-7972 Receiver Ar-Satellite -Accugrade, Dual Gnss, Ms992
| 24***02 | Riser; (Angle) | 1 |
| 27***73 | Mast As; (Grade Control) | 1 |
| 27***86 | Bracket Group-Mounting; -Mast | 1 |
292-0315 Receiver Ar-Satellite -Dual Gps, Ms980
| 28***37 | Receiver Group-Satellite; -Dual Gps, Ms980-Accugrade | 1 |
| 29***15 | Receiver Ar-Satellite; -Dual Gps, Ms980-Accugrade | 1 |
| 29***07 | Mast Group; -Satellite Receiver | 2 |
292-7971 Receiver Ar-Satellite -Accugrade, Single Gnss, Ms992
| 24***02 | Riser; (Angle) | 1 |
| 27***73 | Mast As; (Grade Control) | 1 |
| 27***86 | Bracket Group-Mounting; -Mast | 1 |
292-0314 Receiver Ar-Satellite -Single Gps, Ms980
| 28***36 | Receiver Group-Satellite; -Single Gps, Ms980-Accugrade | 1 |
| 29***14 | Receiver Ar-Satellite; -Single Gps, Ms980-Accugrade | 1 |
| 29***07 | Mast Group; -Satellite Receiver | 1 |
292-0285 Receiver Gp-Laser -Accugrade, Dual
| 27***64 | Cable-Coiled; (Laser Receiver) | 1 |
| 29***85 | Receiver Group-Laser; -Accugrade, Dual | 1 |
| 34***59 | Receiver As-Laser | 1 |
249-7793 Receiver Gp-Laser -Single
| 22***33 | Mast Group; -Laser Receiver | 1 |
| 22***34 | Receiver Group-Laser; (Lr400c) | 1 |
| 22***67 | Adapter; (Receiver) | 1 |
249-7791 Receiver Gp-Satellite -Single Gps, Ms980
| 24***17 | Receiver As-Satellite; (Gps, Ms980) | 1 |
| 24***03 | Bracket Group-Mounting | 1 |
| 24***91 | Receiver Group-Satellite; -Single Gps, Ms980-Accugrade | 1 |
292-0291 Receiver Gp-Satellite -Accugrade, Dual Gnss, Ms992
| 11***93 | Lockwasher | 5 |
| 25***28 | Mounting Group-Receiver; -Target | 2 |
| 25***39 | Case-Plastic; (Receiver) | 1 |
292-0292 Receiver Gp-Satellite -Accugrade, Single Gnss, Ms992
| 11***93 | Lockwasher | 5 |
| 25***28 | Mounting Group-Receiver; -Target | 1 |
| 25***39 | Case-Plastic; (Receiver) | 1 |
286-0136 Receiver Gp-Satellite -Single Gps, Ms980
| 11***93 | Lockwasher | 5 |
| 24***17 | Receiver As-Satellite; (Gps, Ms980) | 1 |
| 25***28 | Mounting Group-Receiver; -Target | 1 |
286-0137 Receiver Gp-Satellite -Dual Gps, Ms980
| 11***93 | Lockwasher | 5 |
| 24***17 | Receiver As-Satellite; (Gps, Ms980) | 2 |
| 25***28 | Mounting Group-Receiver; -Target | 2 |
249-7789 Sensor & Mounting Gp
| 24***14 | Sensor Group-Position; (Blade Rotation) | 1 |
| 24***89 | Sensor & Mounting Group; -Cross Slope | 1 |
| 25***72 | Kit-Bracket | 1 |
185-7967 Sensor & Mtg Gp-Ground Speed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***33 | Sensor Group-Ground Speed; (Radar) | 1 |
| 18***67 | Sensor & Mtg Group-Ground Speed | 1 |
262-2018 Sensor Ar-Grade -Single Sonic
| 24***84 | Fastener Group-Sensor; -Sonic | 2 |
| 24***93 | Case-Plastic | 1 |
| 24***92 | Sensor Group-Sonic | 1 |
250-3027 Sensor Ar-Grade -Cross Slope B
| 22***69 | Module As-Power Supply | 1 |
| 24***89 | Sensor & Mounting Group; -Cross Slope | 1 |
| 25***33 | Wiring Group-Sensor; -Cross Slope | 1 |
249-7801 Sensor Ar-Grade -Single Sonic
| 24***84 | Fastener Group-Sensor; -Sonic | 2 |
| 24***93 | Case-Plastic | 1 |
| 24***92 | Sensor Group-Sonic | 1 |
262-2019 Sensor Ar-Grade -Dual Sonic
| 24***84 | Fastener Group-Sensor; -Sonic | 2 |
| 24***93 | Case-Plastic | 1 |
| 24***92 | Sensor Group-Sonic | 2 |
249-7806 Sensor Ar-Grade -Dual Sonic
| 24***84 | Fastener Group-Sensor; -Sonic | 2 |
| 24***93 | Case-Plastic | 1 |
| 24***92 | Sensor Group-Sonic | 2 |
266-1467 Sensor Gp-Position -Rotary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 26***67 | Sensor Group-Position; -Brake Pedal | 1 |
167-1709 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***09 | Sensor Group-Pressure; -Injection Actuation Oil | 1 |
| 9X***13 | Sleeve (Order By cm)(Use As Required) | 0 |
194-6724 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***24 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
197-8395 Sensor Gp-Pressure -Inlet Manifold
| 19***24 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 19***95 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
197-8393 Sensor Gp-Pressure
| 16***03 | Sensor Group-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
197-8394 Sensor Gp-Pressure
| 16***05 | Sensor As-Pressure; (Unfiltered Engine Oil) | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
321-1455 Sensor Gp-Sonic
| 24***97 | Cable-Coiled; (Sensor) | 1 |
| 25***30 | Sensor As-Sonic; (St400) | 1 |
| 25***44 | Case-Carrying | 1 |
249-7792 Sensor Gp-Sonic
| 09***36 | Pin-Cotter | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 24***15 | Sensor As-Sonic; (St300) | 1 |
272-5451 Sensor Gp-Sonic -Dual
| 24***87 | Rod | 2 |
| 24***88 | Bracket Group-Mounting; -Sonic Sensor | 2 |
| 27***51 | Sensor Group-Sonic; -Dual | 1 |
321-1456 Sensor Gp-Sonic
| 24***97 | Cable-Coiled; (Sensor) | 2 |
| 25***30 | Sensor As-Sonic; (St400) | 2 |
| 25***44 | Case-Carrying | 1 |
272-5450 Sensor Gp-Sonic -Single Sonic
| 24***87 | Rod | 1 |
| 24***88 | Bracket Group-Mounting; -Sonic Sensor | 1 |
| 27***50 | Sensor Group-Sonic; -Single Sonic | 1 |
197-8397 Sensor Gp-Speed -Timing, Camshaft
| 18***01 | Sensor Group-Speed; (Camshaft Timing) | 1 |
| 19***97 | Sensor Group-Speed; -Timing, Camshaft | 1 |
| 20***40 | Seal-O-Ring; (13.94mm Id) | 1 |
197-8396 Sensor Gp-Speed -Timing, Crankshaft
| 18***11 | Sensor Group-Speed; (Crankshaft Timing) | 1 |
| 19***96 | Sensor Group-Speed; -Timing, Crankshaft | 1 |
| 20***40 | Seal-O-Ring; (13.94mm Id) | 1 |
197-8391 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 23***80 | Seal-O-Ring | 1 |
197-8392 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 0 |
| 19***92 | Sensor Group-Temperature; -Coolant, Water | 1 |
186-1728 Starting Aid Gp-Ether
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
197-0580 Starting Aid Gp-Ether -Engine
| 17***67 | Spacer; (8.8x16x10-mm Thk)(Marked X) | 2 |
| 17***91 | Tube | 1 |
| 19***80 | Starting Aid Group-Ether; -Engine | 1 |
6v-5539 Starting Motor Gp-Electric
| 10***54 | Starting Motor Group-Electric; (Delco Remy) | 1 |
| 6V***39 | Starting Motor Group-Electric; (24-Volt) | 1 |
| 6V***82 | Starting Motor Group-Electric; (Nippondenso) | 1 |
104-7041 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***41 | Starting Motor Group-Electric | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
106-8554 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 5 |
| 10***54 | Starting Motor Group-Electric; (Delco Remy) | 1 |
6v-5582 Starting Motor Gp-Electric
| 3E***25 | Cover As; (Starting Motor) | 1 |
| 3E***27 | Kit-Bearing; (Starting Motor)(Incl Bearing Seals & Spacers) | 1 |
| 3E***28 | Kit; (Brush) (Includes O-Rings, Screw, Spring, & Brush) | 1 |
207-1556 Starting Motor Gp-Electric
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 5 |
| 20***56 | Starting Motor Group-Electric; (24-Volt) | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
161-1018 Switch Gp-Light
| 10***78 | Switch As-Rotary; (Headlights-High/Low) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
| 16***18 | Switch Group-Light | 1 |
175-2309 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***81 | Switch As-Magnetic; (Start Relay) | 1 |
3e-0154 Switch Gp-Magnetic
| 3E***54 | Switch Group-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
| 6V***78 | Nut; (10-32-Thd) | 2 |
254-3783 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
167-0138 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
241-8368 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
118-3534 Switch Gp-Magnetic
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
| 17***09 | Switch Group-Magnetic; -24-Volt-Start Relay | 1 |
175-2308 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
275-7741 Switch Gp-Wiper -Intermittent
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 27***41 | Switch Group-Wiper; -Intermittent-Front, Rear | 1 |
3e-0155 Switch Gp-Wiper -Intermittent
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***86 | Wiper Switch Assembly; (24-Volt)(Front/Intermittent) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
161-1930 Wiring Gp-Blade Cushion
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
159-5878 Wiring Gp-Cab
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 9 |
247-6437 Wiring Gp-Cab
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 13***00 | Clip; (Tab) | 4 |
| 15***75 | Ladder Clip | 2 |
203-6551 Wiring Gp-Cab -Moldboard
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
204-6127 Wiring Gp-Cab -Moldboard
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
161-1921 Wiring Gp-Cab -Warning Beacon
| 16***21 | Wiring Group-Cab; -Warning Beacon | 1 |
| 23***62 | Installation Group-Warning Beacon | 1 |
| 9W***42 | Fuse; (10-Ampere) | 1 |
159-5843 Wiring Gp-Console
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
171-1103 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***89 | Clip; (Ladder) | 1 |
159-5867 Wiring Gp-Front
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
247-6436 Wiring Gp-Grade Control
| 12***90 | Plate-Information; (Engine) | 1 |
| 13***89 | Clip; (Ladder) | 2 |
| 24***73 | Wire As | 1 |
233-4648 Wiring Gp-Grade Control
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
252-5709 Wiring Gp-Grade Control -Cab, Indicator Lamp
| 11***48 | Lamp; (24-Volt, 3-Watt)(Clear)(Fuel Level Gauge) | 1 |
| 24***57 | Wiring As; (Accugrade) | 1 |
| 25***09 | Wiring Group-Grade Control; -Cab, Indicator Lamp | 1 |
251-9569 Wiring Gp-Monitor
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
250-1930 Wiring Gp-Monitor
| 15***02 | Knob | 1 |
| 24***04 | Mounting Group-Monitor; -Cb420 Display | 1 |
| 24***09 | Bracket As | 1 |
250-1919 Wiring Gp-Monitor
| 24***04 | Mounting Group-Monitor; -Cb420 Display | 1 |
| 25***19 | Wiring Group-Monitor | 1 |
| 25***69 | Wiring Group-Monitor | 1 |
249-8901 Wiring Gp-Radio
| 03***48 | Clip; (11.11mm .437in Id) | 8 |
| 19***14 | Kit-Receptacle; (12-Pin) | 0 |
| 24***47 | Harness As-Radio | 1 |
254-1561 Wiring Gp-Radio
| 24***01 | Wiring Group-Radio | 1 |
| 25***61 | Wiring Group-Radio | 1 |
161-1929 Wiring Gp-Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
205-3110 Wiring Gp-Rear -Service Center-Rh
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
230-1384 Wiring Gp-Rear
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
200-4983 Wiring Gp-Rear -Eu
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 11***55 | Rod | 2 |
194-7982 Wiring Gp-Rear Lighting -Radiator
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 11***10 | Grommet | 2 |
318-1141 Wiring Gp-Rear Lighting
| 29***49 | Plate | 1 |
| 30***46 | Harness As-Rear; (Brake Pressure) | 1 |
| 31***41 | Wiring Group-Rear Lighting | 1 |
184-6045 Wiring Gp-Secondary Steering
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 13***40 | Control Group-Secondary Steering | 1 |
250-1933 Wiring Gp-Sensor -Cross Slope
| 25***33 | Wiring Group-Sensor; -Cross Slope | 1 |
| 25***40 | Wiring Group-Sensor; -Cross Slope | 1 |
251-2140 Wiring Gp-Sensor -Cross Slope
| 06***65 | Bolt; (1/2-13x1.25-In) | 2 |
| 08***60 | Washer; (5.3x25x1.6-mm Thk) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
159-5855 Wiring Gp-Steering Console
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***83 | Plate | 1 |
117-2760 Wiring Gp-Unit Injector
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 0 |
| 11***60 | Wiring Group-Unit Injector | 1 |
| 2V***16 | Clip; (9.52mm Id) | 4 |
Engine Arrangement
204-7983 Engine Ar
| 11***83 | Cylinder Block Group | 1 |
| 11***85 | Cylinder Head Group | 1 |
| 11***91 | Seal Group-Crankshaft; -Single Lip | 1 |
Frame And Body
339-9374 Axle Gp-Front
| 09***36 | Pin-Cotter | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 28***87 | Handle As | 1 |
110-7720 Axle Gp-Front
| 0S***92 | Bolt--Cover To Flywheel Housing | 2 |
| 0V***75 | Screw,Cap,Hexagon H Shaft Mtg,Accessory Drive | 6 |
| 11***20 | Axle Group-Front | 1 |
248-1488 Bracket Gp-Mounting -Sonic Sensor
| 11***93 | Lockwasher | 5 |
| 11***73 | Screw-Button Head; (10-32x0.75-In) | 2 |
| 24***88 | Bracket Group-Mounting; -Sonic Sensor | 1 |
252-5237 Bracket Gp-Mounting -Laser Target
| 00***62 | Seal-O-Ring; (63.17mm Id) | 1 |
| 18***82 | Case & Frame As | 1 |
| 19***98 | Valve-Drain; (Fuel Sump) | 1 |
161-1130 Case & Frame Gp
| 12***49 | Bracket As | 4 |
| 16***30 | Case & Frame Group | 1 |
| 22***12 | Bracket | 2 |
261-4183 Cover Gp-Protection
| 12***68 | Lock As | 1 |
| 12***38 | Screw-Machine; (M6x1x16-mm) | 16 |
| 12***78 | Locknut; (M6x1-Thd) | 16 |
206-3900 Enclosure Gp-Engine
| 20***00 | Enclosure Group-Engine | 1 |
| 3E***56 | Washer-Hard; (17.5x30x6-mm Thk) | 4 |
| 8T***40 | Bolt-Plt; (M16 X 2.0 X 60) | 4 |
230-7570 Fastener Gp-Grease Lines -Central Lubrication Mounting
| 23***70 | Fastener Group-Grease Lines; -Central Lubrication Mounting | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 2 |
| 5S***85 | Lockwasher | 2 |
248-1484 Fastener Gp-Sensor
| 24***05 | Bracket As | 2 |
| 24***06 | Clamp | 2 |
| 24***07 | Bracket As | 2 |
321-1457 Fastener Gp-Sensor -Sonic
| 11***00 | Cover; (Rh) | 1 |
| 11***01 | Cover; (Lh) | 1 |
| 11***47 | Cover | 1 |
161-1181 Frame Gp-Front
| 12***59 | Step As | 1 |
| 13***71 | Clip | 8 |
| 16***81 | Frame Group-Front | 1 |
221-2349 Guard & Support Gp-Radiator
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 4 |
| 22***49 | Guard & Support Group-Radiator | 1 |
| 5P***52 | Washer 6.35 mm(.25 In.) Thick | 4 |
8x-4146 Guard Gp-Bottom
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 8 |
| 5P***28 | Capscrew; (Hex Hd) (1/2-13 Unc X 1.00, Gd 8 Z) | 4 |
| 6G***19 | Shield As; (Rh) | 1 |
166-7064 Guard Gp-Platform -Open
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***72 | Clip As-Connector; (8-Pin) | 1 |
166-7065 Guard Gp-Platform -Non-Rops
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 4 |
106-4886 Hitch Gp-Articulating
| 10***86 | Hitch Group-Articulating | 1 |
| 1A***63 | Bolt, Hex, Hd., 3/4"-10 N.C. X 2 1/2" | 2 |
| 20***26 | Hitch As | 1 |
194-2838 Hitch Gp-Towing
| 14***36 | Tie Rod Group; (Steering) | 1 |
| 14***37 | Tie Rod Group; (Steering) | 1 |
| 14***41 | Clamp | 2 |
128-2522 Lines Gp-Lubrication
| 12***22 | Lines Group-Lubrication | 1 |
| 18***28 | Starting Aid Group-Ether | 1 |
| 18***31 | Battery Group | 1 |
141-6145 Link Gp-Steering
| 12***98 | Plate; (Rh) | 2 |
| 12***99 | Plate; (Lh) | 2 |
| 14***43 | Support-Step; (Rubber)(Step Access) | 4 |
288-6307 Mounting Gp-Axle -Front
| 1D***66 | Bolt, Rd. Hd. Sq Neck, 1/2" N.C. X 2" | 26 |
| 25***22 | Plate | 6 |
| 25***23 | Plate | 6 |
204-7938 Service Center Ar
| 19***47 | Bracket | 2 |
| 19***79 | Bracket; (Rh) | 1 |
| 19***95 | Bracket As; (Lh) | 1 |
6g-6900 Guard Gp-Drive Shaft
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***72 | Clip As-Connector; (8-Pin) | 1 |
255-2314 Step Gp
| 20***02 | Platform As | 1 |
| 25***14 | Step Group | 1 |
| 8T***40 | Bolt-Plt; (M16 X 2.0 X 60) | 4 |
8x-1035 Step Gp -Belted
| 19***47 | Bracket | 2 |
| 19***95 | Bracket As; (Lh) | 1 |
| 19***68 | Bracket As | 2 |
206-0335 Support Gp-Fuel Tank
| 0A***21 | Clip | 1 |
| 17***79 | Hose As | 1 |
| 19***45 | Reservoir | 1 |
206-6580 Support Gp-Platform
| 20***80 | Support Group-Platform | 1 |
| 20***14 | Air Dryer Group; -Cold Weather Operation | 1 |
| 20***25 | Hose As | 1 |
Fuel System
204-9756 Adapter Gp-Fast Fill Fuel
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 2 |
| 12***63 | Adapter Group-Fast Fill Fuel; (Auto Shutoff) | 1 |
| 12***71 | Clamp-Hose | 1 |
288-2738 Cap Gp-Fuel Filler -Extreme Service, Lockable
| 16***58 | Cap Group-Fuel Filler; -Extreme Service, Lockable | 1 |
| 19***75 | Cover As-Filter; (Fuel Cap) | 1 |
| 28***38 | Cap Group-Fuel Filler; -Extreme Service, Lockable, Engine Brake Slave Piston | 1 |
164-4858 Cap Gp-Fuel Filler -Extreme Service, Lockable
| 16***58 | Cap Group-Fuel Filler; -Extreme Service, Lockable | 1 |
| 19***75 | Cover As-Filter; (Fuel Cap) | 1 |
| 9X***00 | Seal-O-Ring | 1 |
159-5935 Control Gp-Governor
| 00***08 | Setscrew-Socket; (3/8-16x0.5-In) | 1 |
| 11***10 | Grommet | 1 |
| 12***73 | Bolt-12 Point Head; (3/8-16x1.25-In)(3/8-16thd) | 1 |
230-4617 Fastener Gp-Fuel Tank
| 17***92 | Spacer; (13.87x21.33x28-mm Thk) | 4 |
| 23***17 | Fastener Group-Fuel Tank | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 14 |
116-5436 Filter Gp-Fuel
| 11***36 | Filter Group-Fuel; -Secondary | 1 |
| 1R***62 | Filter As-Fuel; (Advanced Efficiency)(Secondary) | 1 |
133-5671 Filter Gp-Water Sep & Fuel
| 12***75 | Bowl As-Water Collection; (Water Separator, Fuel Filter) | 1 |
| 13***71 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 13***73 | Element; (Filter) (Fuel/Water Separator) (Primary) | 1 |
350-7555 Injector Gp-Fuel
| 11***84 | Seal-O-Ring; (32.99mm Id) | 1 |
| 21***98 | Seal-O-Ring; (34.56mm Id) | 1 |
| 35***55 | Injector Group-Fuel | 1 |
203-7685 Injector Gp-Fuel
| 11***84 | Seal-O-Ring; (32.99mm Id) | 1 |
| 20***85 | Injector Group-Fuel | 1 |
| 21***98 | Seal-O-Ring; (34.56mm Id) | 1 |
233-6663 Lines Gp-Fuel
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 12***79 | Manifold; (Fuel) | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
184-1479 Lines Gp-Fuel
| 13***71 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 14***18 | Connector As | 1 |
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 1 |
222-6417 Lines Gp-Fuel -Crossover
| 16***23 | Grommet | 2 |
| 19***37 | Fitting; (Quick) | 1 |
| 19***38 | Coupler; (Quick) | 1 |
204-0638 Lines Gp-Fuel Injection
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 11***16 | Hose Assem. | 1 |
| 11***18 | Hose As | 1 |
222-9203 Manifold Gp-Fuel
| 16***55 | Valve As-Shutoff; (Fast Fill Fuel) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 21***71 | Manifold As | 1 |
116-5428 Pump & Mtg Gp-Fuel Transfer
| 09***70 | Washer-Sealing | 2 |
| 11***28 | Pump & Mtg Group-Fuel Transfer; (Fuel Transfer) | 1 |
| 19***82 | Tube As | 1 |
189-0351 Pump Gp-Fuel Injection
| 15***01 | Bolt; (8x1.25x7-mm)(M8x1.25x70mm) | 1 |
| 18***51 | Pump Group-Fuel Injection | 1 |
| 20***85 | Injector Group-Fuel | 1 |
116-5438 Pump Gp-Fuel Priming
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 11***38 | Pump Group-Fuel Priming; (Fuel Priming) | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
263-8506 Pump Gp-Fuel Priming
| 06***39 | Seal-O-Ring | 1 |
| 13***41 | Pump Group-Fuel Priming; (Hand) | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
219-0702 Tank Gp-Fuel
| 11***57 | Rod | 2 |
| 17***92 | Spacer; (13.87x21.33x28-mm Thk) | 4 |
| 19***07 | Strainer-Fuel | 1 |
161-1126 Tank Gp-Fuel
| 11***57 | Rod | 2 |
| 16***26 | Tank Group-Fuel | 1 |
| 17***92 | Spacer; (13.87x21.33x28-mm Thk) | 4 |
219-1128 Tank Gp-Fuel -Lh
| 00***54 | Nipple-Pipe | 1 |
| 11***45 | Clamp-Hose | 1 |
| 17***18 | Sender As-Fuel Level | 1 |
208-0802 Tank Gp-Fuel -Rh
| 00***54 | Nipple-Pipe | 1 |
| 11***45 | Clamp-Hose | 1 |
| 19***12 | Coupler | 1 |
208-0801 Tank Gp-Fuel -Lh
| 00***54 | Nipple-Pipe | 1 |
| 11***45 | Clamp-Hose | 1 |
| 17***18 | Sender As-Fuel Level | 1 |
2g-9000 Valve As-Tank -Fast Fill Fuel
| 2G***00 | Valve As-Tank | 1 |
156-5783 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 15***83 | Valve Group-Check; -Fuel | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
238-0296 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 23***96 | Valve Group-Check; -Fuel Filter | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
233-6742 Valve Gp-Check -Fuel
| 23***42 | Valve Group-Check; -Fuel Filter | 1 |
| 23***81 | Seal-O-Ring | 1 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
281-2725 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
Hydraulic System
166-3367 Accumulator & Mtg Gp-Hydraulic
| 11***10 | Protector-Gas Valve | 1 |
| 13***23 | Piston | 1 |
| 16***67 | Accumulator & Mtg Group-Hydraulic | 1 |
219-8035 Accumulator Gp-Blade Cushion -Charged
| 16***49 | Clamp | 2 |
| 18***08 | Plate As | 1 |
| 21***35 | Accumulator Group-Blade Cushion; -Charged | 3 |
219-8064 Accumulator Gp-Blade Cushion -Uncharged
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 21***64 | Accumulator Group-Blade Cushion; -Uncharged | 1 |
| 22***32 | Cap; (Gas Valve) | 1 |
221-2800 Accumulator Gp-Hydraulic -Eu
| 16***06 | Lines Group-Ripper | 1 |
| 22***00 | Accumulator Group-Hydraulic; -Eu | 1 |
| 7I***72 | Valve & Linkage Group; -Bank 4-Rh-Bank 5-Lh | 1 |
160-9413 Accumulator Gp-Hydraulic
| 16***13 | Accumulator Group-Hydraulic | 1 |
248-6251 Accumulator Gp-Steering -Charged
| 12***99 | Valve & Linkage Group; -6-Bank, Rh; 7-Bank, Lh | 1 |
| 16***08 | Lines Group-Ripper; -Hydraulic Control | 1 |
| 24***51 | Accumulator Group-Steering; -Charged | 1 |
248-6252 Accumulator Gp-Steering -Uncharged
| 12***97 | Valve & Linkage Group; -5-Bank, Rh, Lh | 1 |
| 16***08 | Lines Group-Ripper; -Hydraulic Control | 1 |
| 24***52 | Accumulator Group-Steering; -Uncharged | 1 |
184-7308 Control Ar-Hydraulic
| 16***06 | Lines Group-Ripper | 1 |
| 18***08 | Control Ar-Hydraulic; -Eu | 1 |
| 25***43 | Valve & Linkage Group | 1 |
254-0218 Control Ar-Hydraulic
| 16***06 | Lines Group-Ripper | 1 |
| 25***18 | Control Ar-Hydraulic | 1 |
| 25***46 | Valve & Linkage Group | 1 |
254-0220 Control Ar-Hydraulic -Plow,Dozer,Ripper
| 16***06 | Lines Group-Ripper | 1 |
| 25***20 | Control Ar-Hydraulic; -Plow,Dozer,Ripper | 1 |
| 25***48 | Valve & Linkage Group | 1 |
254-0223 Control Ar-Hydraulic
| 1B***64 | Bolt (2.125"Long) | 2 |
| 1D***10 | Bolt 82.55 mm (3.25 In.) Long) | 2 |
| 1K***81 | Washer | 14 |
184-7305 Control Ar-Hydraulic -Eu
| 12***35 | Valve & Linkage Group; -4-Bank, Rh; 7-Bank, Lh | 1 |
| 16***08 | Lines Group-Ripper; -Hydraulic Control | 1 |
| 18***05 | Control Ar-Hydraulic; -Eu | 1 |
265-7821 Control Ar-Hydraulic
| 1D***15 | Bolt 139.70 mm(5.50 In.) Long | 8 |
| 1D***30 | Bolt 101.6 mm(4 In.) Long | 4 |
| 26***21 | Control Ar-Hydraulic | 1 |
194-7985 Control Ar-Hydraulic -Eu
| 16***06 | Lines Group-Ripper | 1 |
| 19***85 | Control Ar-Hydraulic; -Eu | 1 |
| 25***45 | Valve & Linkage Group | 1 |
194-4020 Control Ar-Hydraulic
| 16***06 | Lines Group-Ripper | 1 |
| 19***20 | Control Ar-Hydraulic | 1 |
| 25***44 | Valve & Linkage Group | 1 |
254-0221 Control Ar-Hydraulic
| 16***06 | Lines Group-Ripper | 1 |
| 25***21 | Control Ar-Hydraulic | 1 |
| 26***24 | Valve & Linkage Group | 1 |
254-0222 Control Ar-Hydraulic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***57 | Plate | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
254-0219 Control Ar-Hydraulic
| 16***06 | Lines Group-Ripper | 1 |
| 25***19 | Control Ar-Hydraulic | 1 |
| 25***47 | Valve & Linkage Group | 1 |
184-7307 Control Ar-Hydraulic
| 12***20 | Valve & Linkage Group; -Bank 4-Rh-Bank 5-Lh | 1 |
| 16***06 | Lines Group-Ripper | 1 |
| 18***07 | Control Ar-Hydraulic | 1 |
166-3405 Control Ar-Hydraulic
| 12***90 | Valve & Linkage Group; -4-Bank, Rh; 5-Bank, Lh | 1 |
| 16***08 | Lines Group-Ripper; -Hydraulic Control | 1 |
| 16***05 | Control Ar-Hydraulic | 1 |
173-7375 Control Gp-Centershift Lock
| 17***75 | Control Group-Centershift Lock | 1 |
| 5P***28 | Capscrew; (Hex Hd) (1/2-13 Unc X 1.00, Gd 8 Z) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
8w-3258 Cylinder & Mtg Gp-Articulation
| 24***37 | Spacer; (39x75x20-mm Thk) | 2 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 2 |
| 8T***92 | Capscrew; (Hex Hd) (M12 X 1.75 X 25, Gr10.9, Z) | 2 |
8w-3261 Cylinder & Mtg Gp-Blade Lift
| 1D***30 | Bolt 101.6 mm(4 In.) Long | 4 |
| 2G***01 | Cap | 2 |
| 2G***06 | Shim; (0.5-mm Thk) | 8 |
260-3646 Cylinder & Mtg Gp-Blade Tip
| 14***36 | Tie Rod Group; (Steering) | 2 |
| 16***06 | Cylinder Group-Steering; -Rh | 1 |
| 16***07 | Cylinder Group-Steering | 1 |
8w-3255 Cylinder & Mtg Gp-Blade Tip
| 1D***26 | Bolt 6.99 cm(2.75 In.) Long | 4 |
| 1H***78 | Pin | 1 |
| 1K***72 | Locknut Horn To Guard | 1 |
8w-3262 Cylinder & Mtg Gp-Centershift
| 0S***92 | Bolt--Cover To Flywheel Housing | 1 |
| 12***44 | Cylinder Group-Wheel Lean | 1 |
| 2G***67 | Retainer | 1 |
8w-3257 Cylinder & Mtg Gp-Sideshift
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
| 17***81 | Head | 1 |
8w-3260 Cylinder & Mtg Gp-Steering
| 17***83 | Bolt-Hex Head; (M30x3.5x90mm) | 1 |
| 17***00 | Seal-O-Ring | 1 |
| 22***82 | Seal-Wiper | 0 |
8w-3259 Cylinder & Mtg Gp-Wheel Lean
| 12***97 | Head | 1 |
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
9t-3050 Cylinder Gp-Articulation
| 12***97 | Head | 1 |
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
9t-8944 Cylinder Gp-Blade Tip
| 11***76 | Cylinder As | 1 |
| 11***81 | Rod As | 1 |
| 12***95 | Head | 1 |
9t-3312 Cylinder Gp-Centershift
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
| 17***81 | Head | 1 |
9t-3106 Cylinder Gp-Lift
| 15***49 | Head | 1 |
| 16***91 | Seal As-Buffer | 1 |
| 16***00 | Seal-U-Cup | 1 |
113-5264 Cylinder Gp-Ripper
| 11***64 | Cylinder Group-Ripper | 1 |
| 15***49 | Head | 1 |
| 16***91 | Seal As-Buffer | 1 |
9t-3206 Cylinder Gp-Sideshift
| 12***47 | Rod As | 1 |
| 12***77 | Cylinder As | 1 |
| 16***00 | Seal Assem. | 1 |
165-2507 Cylinder Gp-Steering
| 10***74 | Retainer | 1 |
| 12***87 | Piston | 1 |
| 12***88 | Retainer | 1 |
165-2506 Cylinder Gp-Steering -Rh
| 10***74 | Retainer | 1 |
| 10***75 | Retainer | 1 |
| 10***23 | Spring | 1 |
121-9244 Cylinder Gp-Wheel Lean
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 11 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***44 | Cylinder Group-Wheel Lean | 1 |
108-4916 Detent Gp-Control Valve
| 10***10 | Clamp | 7 |
| 10***16 | Detent Group-Control Valve; -Plow, Bulldozer Lift | 1 |
| 11***40 | Valve & Mounting Group; -Blade Cushion | 1 |
130-3535 Detent Gp-Control Valve
| 10***10 | Clamp | 7 |
| 11***40 | Valve & Mounting Group; -Blade Cushion | 1 |
| 11***87 | Hose As; (Lift Cylinder) | 1 |
5t-1740 Drive Gp-Circle
| 10***05 | Hose As | 1 |
| 10***09 | Hose As | 1 |
| 10***10 | Clamp | 5 |
188-7194 Lines Gp-Hydraulic -Lh
| 13***79 | Hose As | 1 |
| 14***13 | Adapter Group | 1 |
| 14***25 | Connector As. | 1 |
188-7195 Lines Gp-Hydraulic -Rh
| 18***95 | Lines Group-Hydraulic; -Rh | 1 |
| 20***04 | Hose As | 1 |
| 24***77 | Hose As | 1 |
188-7254 Lines Gp-Hydraulic Fan
| 08***91 | Bolt; (M10x1.5x55-mm) | 4 |
| 10***15 | Elbow Group | 1 |
| 11***34 | Hose Assem. | 1 |
175-6983 Lines Gp-Hydraulic Fan -Radiator
| 08***91 | Bolt; (M10x1.5x55-mm) | 4 |
| 10***15 | Elbow Group | 1 |
| 11***34 | Hose Assem. | 1 |
243-0420 Lines Gp-Hydraulic Fan
| 08***91 | Bolt; (M10x1.5x55-mm) | 4 |
| 10***15 | Elbow Group | 1 |
| 11***34 | Hose Assem. | 1 |
188-0756 Lines Gp-Pump
| 08***91 | Bolt; (M10x1.5x55-mm) | 4 |
| 10***15 | Elbow Group | 1 |
| 10***05 | Tee-O-Ring | 1 |
243-0427 Lines Gp-Pump
| 14***46 | Elbow, 90, -8 Orb / Orfs | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 18***44 | Union | 1 |
166-3406 Lines Gp-Ripper
| 10***02 | Hose As | 2 |
| 12***06 | Tee-O-Ring | 1 |
| 13***30 | Seal; (12.7mm Id) | 1 |
166-3308 Lines Gp-Ripper
| 10***12 | Hose As | 1 |
| 10***13 | Hose As | 1 |
| 11***89 | Hose As | 1 |
207-3736 Lines Gp-Ripper
| 10***02 | Hose As | 2 |
| 12***06 | Tee-O-Ring | 1 |
| 13***30 | Seal; (12.7mm Id) | 1 |
166-3333 Lines Gp-Secondary Steering
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0T***29 | Locking Plate,Nut A Pump Mtg Part Of Kit P/N 5r***25 | 1 |
| 16***33 | Lines Group-Secondary Steering; -Outside Nacd | 1 |
188-7196 Lines Gp-Steering
| 14***10 | Valve Group-Solenoid; -Axle Oil Cooler-Hydraulic Lockout | 1 |
| 18***96 | Lines Group-Steering | 1 |
| 8C***62 | Manifold | 1 |
9d-5715 Lock Gp-Centershift
| 24***89 | Valve Group-Shuttle | 1 |
| 24***51 | Valve Group-Control | 1 |
| 26***99 | Valve Group-Solenoid & Manifold | 1 |
193-5765 Manifold Gp-Control -Hydraulic Fan
| 09***95 | Pin, Dowel | 4 |
| 17***55 | Seal-Shaft | 1 |
| 19***65 | Manifold Group-Control; -Hydraulic Fan | 1 |
239-9893 Manifold Gp-Valve -Lh
| 23***93 | Manifold Group-Valve; -Lh | 1 |
| 6Y***32 | Bearing-Thrust | 1 |
| 6Y***33 | Ring-Thrust | 2 |
239-9894 Manifold Gp-Valve -Rh
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 12***14 | Pump; (Secondary Steering) | 1 |
| 1A***09 | Capscrew (3/8 - 24 Nf X 1 1/4 Gd8, Hex) | 2 |
224-7040 Motor Gp-Gear
| 17***17 | Pump Group-Piston; -Hydraulic Steering | 1 |
| 18***48 | Pump Group-Piston; -Hydraulic Fan | 1 |
| 18***18 | Plate As | 1 |
9t-5977 Motor Gp-Gerotor
| 10***04 | Coupling-Shaft | 1 |
| 18***18 | Plate As | 1 |
| 23***57 | Pump Group-Piston | 1 |
123-8915 Pump & Motor Gp -Secondary Steering
| 10***04 | Coupling-Shaft | 1 |
| 12***15 | Pump & Motor Group; -Engine Prelubrication | 1 |
| 17***17 | Pump Group-Piston; -Hydraulic Steering | 1 |
237-7627 Pump & Mtg Gp-Piston
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 03***36 | Seal-O-Ring | 1 |
180-5446 Pump & Mtg Gp-Piston
| 12***15 | Pump & Motor Group; -Engine Prelubrication | 1 |
| 18***46 | Pump & Mtg Group-Piston | 1 |
7i-4756 Pump & Mtg Gp-Secondary Steer
| 09***47 | Pin, Dowel | 1 |
| 13***78 | Seal; (112.9mm Od) | 1 |
| 13***23 | Plug-Break Off | 1 |
111-0491 Pump Gp-Metering
| 11***91 | Pump Group-Metering | 1 |
| 11***16 | Seal-O-Ring | 4 |
| 12***94 | Plug; (Break Off) | 1 |
184-7448 Pump Gp-Piston -Hydraulic Fan
| 18***48 | Pump Group-Piston; -Hydraulic Fan | 1 |
| 6E***17 | Plate-Limiter | 2 |
| 6E***18 | Plate-Spacer | 2 |
241-0165 Pump Gp-Piston
| 15***12 | Piston Assem. | 9 |
| 15***15 | Plate | 1 |
| 15***16 | Guide; (Ball) | 1 |
177-7517 Pump Gp-Piston -Hydraulic Steering
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 03***36 | Seal-O-Ring | 1 |
235-4257 Pump Gp-Piston
| 18***24 | Kit-Piston | 1 |
| 18***25 | Barrel | 1 |
| 18***26 | Plate | 1 |
194-9453 Rotating Gp-Pump
| 16***01 | Swashplate Stop | 2 |
| 19***53 | Rotating Group-Pump; -Brake, Hydraulic Fan | 1 |
| 1H***37 | Pin (Spring) | 2 |
189-4710 Rotating Gp-Pump
| 16***33 | Lines Group-Secondary Steering; -Outside Nacd | 1 |
| 18***45 | Wiring Group-Secondary Steering | 1 |
| 18***10 | Rotating Group-Pump; -Hydraulic | 1 |
6e-4216 Rotating Gp-Pump -Hydraulic Steering
| 0S***84 | Cap Screw (2 1/4" Long) | 12 |
| 18***99 | Slip Joint Group | 1 |
| 18***97 | Yoke As | 1 |
180-3491 Shaft Gp-Pump Drive
| 17***07 | Seal | 2 |
| 17***08 | Rotor | 1 |
| 17***09 | Retainer | 1 |
166-3310 Steering Ar-Secondary
| 16***10 | Steering Ar-Secondary | 1 |
| 17***07 | Seal | 2 |
| 17***08 | Rotor | 1 |
184-1527 Swashplate Gp
| 08***07 | Pin | 1 |
| 14***61 | Spacer; (20x128x6-mm Thk) | 1 |
| 18***27 | Swashplate Group; -Implement Pump | 1 |
260-6502 Swivel Gp -Circle Drive
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 1 |
| 10***19 | Plate As; (Rh) | 1 |
173-1011 Swivel Gp -Circle Drive
| 17***11 | Swivel Group; -Circle Drive | 1 |
| 20***10 | Tank & Filter Group-Hydraulic | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
207-2410 Tank & Filter Gp-Hydraulic
| 10***57 | Lever; (Plow, Bulldozer Angle) | 1 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 1 |
| 10***19 | Plate As; (Rh) | 1 |
207-2409 Tank & Mtg Gp-Hydraulic
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 1 |
| 10***19 | Plate As; (Rh) | 1 |
112-2240 Manifold Gp-Control
| 11***40 | Valve & Mounting Group; -Blade Cushion | 1 |
| 24***89 | Valve Group-Shuttle | 1 |
| 24***51 | Valve Group-Control | 1 |
121-4097 Valve & Linkage Gp -5-Bank, Rh, Lh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 1 |
| 10***19 | Plate As; (Rh) | 1 |
7i-4872 Valve & Linkage Gp -Bank 4-Rh-Bank 5-Lh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 2 |
| 10***19 | Plate As; (Rh) | 1 |
254-0247 Valve & Linkage Gp
| 10***57 | Lever; (Plow, Bulldozer Angle) | 1 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 2 |
| 10***19 | Plate As; (Rh) | 1 |
254-0243 Valve & Linkage Gp
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 2 |
| 10***19 | Plate As; (Rh) | 1 |
254-0244 Valve & Linkage Gp
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 2 |
| 10***97 | Lever; (Plow, Bulldozer Angle) | 1 |
254-0245 Valve & Linkage Gp
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 3 |
| 10***97 | Lever; (Plow, Bulldozer Angle) | 1 |
121-4099 Valve & Linkage Gp -6-Bank, Rh; 7-Bank, Lh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 2 |
| 10***97 | Lever; (Plow, Bulldozer Angle) | 1 |
121-4090 Valve & Linkage Gp -4-Bank, Rh; 5-Bank, Lh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 1 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 1 |
| 10***19 | Plate As; (Rh) | 1 |
265-7824 Valve & Linkage Gp
| 10***09 | Seal-Integral, . Gear; Ring | 5 |
| 10***46 | Cover | 1 |
| 10***38 | Manifold | 1 |
125-2235 Valve & Linkage Gp -4-Bank, Rh; 7-Bank, Lh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 2 |
| 10***19 | Plate As; (Rh) | 1 |
265-7823 Valve & Linkage Gp
| 10***09 | Seal-Integral, . Gear; Ring | 5 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
254-0246 Valve & Linkage Gp
| 10***57 | Lever; (Plow, Bulldozer Angle) | 1 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 1 |
| 10***19 | Plate As; (Rh) | 1 |
124-4220 Valve & Linkage Gp -Bank 4-Rh-Bank 5-Lh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 1 |
| 10***19 | Plate As; (Rh) | 1 |
8x-4144 Valve & Linkage Gp -Bank4-Lh,Rh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 3 |
| 10***97 | Lever; (Plow, Bulldozer Angle) | 2 |
254-0248 Valve & Linkage Gp
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 3 |
| 10***97 | Lever; (Plow, Bulldozer Angle) | 1 |
254-0254 Valve & Linkage Gp
| 10***57 | Lever; (Plow, Bulldozer Angle) | 1 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 1 |
| 10***19 | Plate As; (Rh) | 1 |
124-4211 Valve & Linkage Gp -Bank 4-Lh,Rh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 1 |
| 10***19 | Plate As; (Rh) | 1 |
270-5006 Valve & Linkage Gp
| 10***09 | Seal-Integral, . Gear; Ring | 5 |
| 10***46 | Cover | 1 |
| 10***38 | Manifold | 1 |
130-3135 Valve Gp-Bank 4 -Rh
| 10***09 | Seal-Integral, . Gear; Ring | 5 |
| 10***38 | Manifold | 1 |
| 10***60 | Valve Group-Control; -Articulation | 1 |
254-3378 Valve Gp-Bank 4
| 10***09 | Seal-Integral, . Gear; Ring | 6 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
104-8658 Valve Gp-Bank 4 -Lh
| 10***09 | Seal-Integral, . Gear; Ring | 5 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
130-3116 Valve Gp-Bank 4 -Rh
| 10***09 | Seal-Integral, . Gear; Ring | 5 |
| 10***38 | Manifold | 1 |
| 10***60 | Valve Group-Control; -Articulation | 1 |
254-3374 Valve Gp-Bank 4
| 10***09 | Seal-Integral, . Gear; Ring | 5 |
| 10***85 | Manifold | 1 |
| 10***54 | Valve Group-Control; -Blade Tilt | 1 |
130-3133 Valve Gp-Bank 4 -Lh
| 10***09 | Seal-Integral, . Gear; Ring | 5 |
| 10***85 | Manifold | 1 |
| 10***54 | Valve Group-Control; -Blade Tilt | 1 |
263-6440 Valve Gp-Bank 4
| 10***09 | Seal-Integral, . Gear; Ring | 6 |
| 10***46 | Cover | 1 |
| 10***38 | Manifold | 1 |
104-8676 Valve Gp-Bank 4 -Rh
| 10***09 | Seal-Integral, . Gear; Ring | 5 |
| 10***46 | Cover | 1 |
| 10***38 | Manifold | 1 |
254-3375 Valve Gp-Bank 4
| 10***09 | Seal-Integral, . Gear; Ring | 6 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
104-8660 Valve Gp-Bank 5 -Lh
| 10***09 | Seal-Integral, . Gear; Ring | 6 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
254-3377 Valve Gp-Bank 5
| 10***09 | Seal-Integral, . Gear; Ring | 7 |
| 10***46 | Cover | 1 |
| 10***38 | Manifold | 1 |
254-3381 Valve Gp-Bank 5
| 10***09 | Seal-Integral, . Gear; Ring | 8 |
| 10***85 | Manifold | 1 |
| 10***54 | Valve Group-Control; -Blade Tilt | 1 |
130-3134 Valve Gp-Bank 5 -Lh
| 10***09 | Seal-Integral, . Gear; Ring | 6 |
| 10***38 | Manifold | 1 |
| 10***47 | Valve Group-Control; -Bulldozer Lift, Plow | 1 |
130-3118 Valve Gp-Bank 5 -Lh
| 10***09 | Seal-Integral, . Gear; Ring | 6 |
| 10***85 | Manifold | 1 |
| 10***54 | Valve Group-Control; -Blade Tilt | 1 |
130-3123 Valve Gp-Bank 5 -Rh
| 10***09 | Seal-Integral, . Gear; Ring | 6 |
| 10***85 | Manifold | 1 |
| 10***54 | Valve Group-Control; -Blade Tilt | 1 |
254-3373 Valve Gp-Bank 5
| 10***09 | Seal-Integral, . Gear; Ring | 6 |
| 10***38 | Manifold | 1 |
| 10***60 | Valve Group-Control; -Articulation | 1 |
254-3379 Valve Gp-Bank 5
| 10***09 | Seal-Integral, . Gear; Ring | 8 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
130-3124 Valve Gp-Bank 6 -Rh
| 10***09 | Seal-Integral, . Gear; Ring | 8 |
| 10***85 | Manifold | 1 |
| 10***54 | Valve Group-Control; -Blade Tilt | 1 |
254-3380 Valve Gp-Bank 7 -Lh
| 10***21 | Valve Group-Relief; -Direct Operated | 1 |
| 13***50 | Valve Group-Purge; -Hydraulic Steering-Implement Signal | 1 |
| 14***08 | Plug As. | 3 |
130-3122 Valve Gp-Bank 7 -Lh
| 13***22 | Valve Group-Bank 7; -Lh | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 1 |
263-6439 Valve Gp-Bank 7
| 10***21 | Valve Group-Relief; -Direct Operated | 1 |
| 13***50 | Valve Group-Purge; -Hydraulic Steering-Implement Signal | 1 |
| 14***08 | Plug As. | 3 |
171-6470 Valve Gp-Check
| 10***48 | Stem | 1 |
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
9t-5957 Valve Gp-Combination
| 10***49 | Stem | 1 |
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
229-7155 Valve Gp-Combination
| 10***54 | Stem | 1 |
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
107-0565 Valve Gp-Control -Blade Lift
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
119-9550 Valve Gp-Control -Ripper
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***82 | Lever As; (Blade Lift) | 1 |
6e-3028 Valve Gp-Control -Articulation
| 10***55 | Stem | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
115-1007 Valve Gp-Control -Bulldozer Angle, Plow, Rh
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
107-0547 Valve Gp-Control -Bulldozer Lift, Plow
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
128-8647 Valve Gp-Control -Blade Lift, Rh
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***84 | Body | 1 |
107-0555 Valve Gp-Control -Circle Drive
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***80 | Housing | 1 |
107-0560 Valve Gp-Control -Articulation
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
6e-3035 Valve Gp-Control -Circle Drive
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
107-0562 Valve Gp-Control -Centershift
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
130-3110 Valve Gp-Control -Blade Lift, Lh
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***72 | Detent | 1 |
130-3114 Valve Gp-Control -Blade Lift
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***72 | Detent | 1 |
| 10***73 | Retainer | 4 |
137-8104 Valve Gp-Control -Wing Tilt, Lh
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 10***16 | Pin-Spring Stop | 1 |
107-0554 Valve Gp-Control -Blade Tilt
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
6e-3036 Valve Gp-Control -Sideshift
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
107-0558 Valve Gp-Control -Blade Lift
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
130-3111 Valve Gp-Control -Bulldozer Lift, Plow, Rh
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***84 | Body | 1 |
107-0563 Valve Gp-Control -Wheel Lean
| 10***48 | Stem | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
137-8106 Valve Gp-Control -Wing Lift, Lh
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 13***06 | Valve Group-Control; -Wing Lift, Lh | 1 |
124-3455 Valve Gp-Control -Ripper-Lh
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
6e-3034 Valve Gp-Control -Blade Tip
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
6e-3030 Valve Gp-Control -Wheel Lean
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
130-3115 Valve Gp-Control -Blade Lift
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
150-6649 Valve Gp-Control -Wing Lift, Lh
| 10***44 | Valve | 1 |
| 13***70 | Sleeve | 1 |
| 15***49 | Valve Group-Control; -Wing Lift, Lh | 1 |
107-0559 Valve Gp-Control -Ripper-Lh
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
6e-3029 Valve Gp-Control -Centershift
| 10***55 | Stem | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
107-0556 Valve Gp-Control -Sideshift
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
104-3122 Valve Gp-Pump Control -Pressure, Flow Compensator
| 10***22 | Valve Group-Pump Control; -Pressure, Flow Compensator-Implement, Steering | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***42 | Spring | 1 |
168-2210 Valve Gp-Pump Control -Pressure, Flow Compensator
| 16***10 | Valve Group-Pump Control; -Pressure, Flow Compensator-Hydraulic Oil Clg Fan Piston Pump | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
131-8350 Valve Gp-Purge -Implement
| 13***50 | Valve Group-Purge; -Hydraulic Steering-Implement Signal | 1 |
| 1N***02 | Seal Plug On Manifold Assembly | 4 |
| 3G***44 | Valve; (Crossover Steering) | 2 |
222-7774 Valve Gp-Relief
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
6e-4703 Valve Gp-Relief -Implement Signal
| 13***77 | Valve | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 4D***97 | Seal 15.6 mm(.614 In.) I.D. | 1 |
9t-6129 Valve Gp-Relief -Steering
| 11***35 | Retainer As | 1 |
| 13***77 | Valve | 1 |
| 2A***11 | Washer; (5.5x12.3x0.8-mm Thk) | 1 |
346-3799 Valve Gp-Relief
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 21***94 | Coil As; (24-Volt) | 1 |
116-0375 Valve Gp-Relief
| 11***75 | Valve Group-Relief; -Direct Operated | 1 |
| 13***77 | Valve | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
4t-4935 Valve Gp-Relief -Main
| 10***57 | Valve | 1 |
| 12***61 | Housing | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
139-8476 Valve Gp-Relief
| 11***35 | Retainer As | 1 |
| 13***77 | Valve | 1 |
| 13***76 | Valve Group-Relief | 1 |
139-8477 Valve Gp-Relief
| 13***77 | Valve Group-Relief | 1 |
| 14***03 | Seal-O-Ring | 1 |
| 14***04 | Ring-Backup | 2 |
100-6021 Valve Gp-Relief -Steering
| 10***21 | Valve Group-Relief; -Direct Operated | 1 |
| 13***77 | Valve | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
139-8472 Valve Gp-Relief
| 13***72 | Valve Group-Relief; -Ripper | 1 |
| 34***99 | Valve Group-Relief | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
131-0753 Valve Gp-Shuttle
| 13***53 | Valve Group-Shuttle; -Swing Piston Pump | 1 |
| 9C***95 | Boss-Tapped; (M10x1.5-Thd) | 5 |
4t-1860 Valve Gp-Shuttle -Implement Signal
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 18***24 | Adapter As | 1 |
149-2610 Valve Gp-Solenoid
| 10***38 | Plate | 8 |
| 14***10 | Valve Group-Solenoid; -Axle Oil Cooler-Hydraulic Lockout | 1 |
| 1K***72 | Locknut Horn To Guard | 12 |
183-7595 Valve Gp-Solenoid -Demand Fan
| 12***54 | Strip-Wear | 10 |
| 12***55 | Strip-Wear | 6 |
| 15***10 | Shim; (0.12-mm Thk) | 1 |
Implements
247-6445 Boss Gp-Drawbar
| 1D***43 | Bolt (5-1/2 In. Long 1 In. Dia.); Platform To Support Assembly | 10 |
| 24***45 | Boss Group-Drawbar | 1 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 10 |
6g-4975 Circle Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 2 |
6g-4980 Drawbar Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 2 |
8x-6330 Plate Gp-Push
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
Lubrication System
166-1329 Base Gp-Oil Filter -Engine
| 11***45 | Valve-Pump Bypass; (Engine Oil Filter) | 1 |
| 16***28 | Base Assem. | 1 |
| 16***29 | Base Group-Oil Filter; -Engine | 1 |
174-1579 Filler Gp-Engine Oil
| 17***79 | Filler Group-Engine Oil | 1 |
| 17***80 | Tube As-Filler | 1 |
| 18***54 | Bracket As | 1 |
164-2490 Filter Gp-Engine Oil
| 10***28 | Cover | 1 |
| 10***29 | Name-Plate (Lubrication), Adapter | 1 |
| 10***95 | Base Group-Oil Filter; -Engine | 1 |
174-1576 Gauge Gp-Oil Level (Dipstick) -Engine
| 17***76 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
| 17***77 | Gauge As; (Dipstick)(Engine) | 1 |
| 17***78 | Tube As-Oil | 1 |
203-2204 Lines Gp-Engine Oil Drain
| 15***37 | Elbow Group | 1 |
| 1P***19 | Coupler (Use With .75 In Hose) | 1 |
| 20***04 | Lines Group-Engine Oil Drain | 1 |
199-1096 Lines Gp-Turbocharger Oil
| 11***87 | Seal-O-Ring (23.16 mm Id) | 1 |
| 11***42 | Adapter | 1 |
| 16***79 | Tube As | 1 |
233-5220 Pump Gp-Engine Oil
| 23***20 | Pump Group-Engine Oil | 1 |
| 6D***46 | Seal-O-Ring (Id=101.27mm) | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 4 |
117-2746 Pump Gp-Engine Oil
| 06***61 | Seal-O-Ring (Id=40.87mm) | 1 |
| 11***03 | Tube Assem. | 1 |
| 11***46 | Pump Group-Engine Oil | 1 |
Machine Arrangement
211-1771 Conversion Ar-Certification
| 12***11 | Valve & Linkage Group; -Bank 4-Lh,Rh | 1 |
| 15***03 | Control Group-Hydraulic Lockout | 1 |
| 16***10 | Steering Ar-Secondary | 1 |
211-1772 Conversion Ar-Certification
| 12***11 | Valve & Linkage Group; -Bank 4-Lh,Rh | 1 |
| 15***03 | Control Group-Hydraulic Lockout | 1 |
| 16***10 | Steering Ar-Secondary | 1 |
162-5607 General Ar
| 10***86 | Hitch Group-Articulating | 1 |
| 11***20 | Axle Group-Front | 1 |
| 12***22 | Lines Group-Lubrication | 1 |
Operator Station
171-7185 Accessory Gp-Cab -Low Profile
| 17***85 | Accessory Group-Cab; -Low Profile | 1 |
171-7186 Accessory Gp-Cab -High Profile
| 12***72 | Pad; (1035mm X 150mm) | 1 |
| 17***86 | Accessory Group-Cab; -High Profile | 1 |
| 17***48 | Air Conditioner Group; -Snow | 1 |
173-1028 Adjuster Gp-Seat
| 16***03 | Lines Group-Air Conditioner | 1 |
| 16***99 | Lines Group-Heater | 1 |
| 17***28 | Adjuster Group-Seat; -Seat | 1 |
237-3970 Air Compressor Gp-Seat
| 03***38 | Clamp | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
173-5313 Air Conditioner & Mounting Gp
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 11***40 | Bracket As-Lh | 1 |
| 17***13 | Air Conditioner & Mounting Group; -Snow | 1 |
167-8069 Air Conditioner Ar
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 11***43 | Bracket As-Rh | 1 |
| 16***69 | Air Conditioner Ar | 1 |
174-4548 Air Conditioner Gp
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***14 | Bracket As | 1 |
| 17***48 | Air Conditioner Group; -Snow | 1 |
202-7666 Armrest Gp -Rh
| 16***72 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
| 19***41 | Guard; (Air Conditioner Compr Pulley) | 1 |
| 19***69 | Bracket-Mounting | 1 |
113-4242 Armrest Gp -Lh
| 11***42 | Armrest Group; -Lh | 1 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***13 | Bracket As | 1 |
202-7668 Armrest Gp -Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 20***68 | Armrest Group; -Lh | 1 |
| 31***18 | Valve As-Pressure Relief; (Refrigerant Compressor) | 1 |
113-4245 Armrest Gp -Rh
| 11***45 | Armrest Group; -Rh | 1 |
| 29***66 | Bracket As | 1 |
| 30***36 | Handle-Screw | 1 |
294-5260 Bracket Gp-Mounting -Monitor
| 22***46 | Plate As; (Lh) | 1 |
| 22***29 | Plate As; (Rh) | 1 |
| 25***79 | Core As-Condenser; (Air Conditioner) | 1 |
197-4568 Compressor & Mtg Gp-Refrig
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 1 |
| 03***66 | Rod | 1 |
| 03***94 | Pin | 1 |
163-0872 Compressor Gp-Refrigerant
| 09***90 | Ring-Retaining | 1 |
| 10***04 | Bracket As | 1 |
| 11***30 | Retainer | 1 |
208-5568 Condenser & Mtg Gp-Refrigerant -A/C
| 09***90 | Ring-Retaining | 1 |
| 10***04 | Bracket As | 1 |
| 11***30 | Retainer | 1 |
167-9004 Console Gp-Operator
| 09***18 | Setscrew-Socket; (M4x0.7x6-mm) | 12 |
| 10***14 | Knob | 4 |
| 15***30 | Block | 4 |
167-8053 Console Gp-Operator
| 12***73 | Bolt-12 Point Head; (3/8-16x1.25-In)(3/8-16thd) | 1 |
| 16***65 | Bracket As | 1 |
| 16***53 | Console Group-Operator | 1 |
172-5717 Control Gp-Clutch
| 09***00 | Steering Wheel | 1 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 4 |
| 14***95 | Nut; (13/16-20-Thd) | 1 |
152-7903 Control Gp-Hydraulic Lockout
| 15***03 | Control Group-Hydraulic Lockout | 1 |
| 25***03 | Control Group-Unprogrammed; (Caterpillar Monitoring System)(Caterpillar Monitoring System) | 1 |
7i-4720 Control Gp-Steering
| 16***65 | Guard Group-Platform; -Non-Rops | 1 |
| 19***55 | Panel Group-Instrument; -High Profile | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
160-6567 Control Gp-Unprgmed Monitor -Caterpillar Monitoring System
| 16***67 | Control Group-Unprgmed Monitor; -Caterpillar Monitoring System | 1 |
| 24***87 | Display Group-Monitor; -Display, Light Bar | 1 |
| 25***30 | Wiring Group-Monitor | 1 |
203-6643 Conversion Ar-Non-Rops
| 16***02 | Mounting Group-Radio | 1 |
| 20***43 | Conversion Ar-Non-Rops | 1 |
| 24***20 | Monitor As; (Light Bar) | 3 |
249-7783 Display Ar-Monitor -Cb420
| 22***98 | Kit-Bracket; (Grade Control) | 1 |
| 24***83 | Display Ar-Monitor; -Cb420 | 1 |
| 25***95 | Control Group-Unprogrammed; (Cb420) | 1 |
249-7786 Display Ar-Monitor -Cd550
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 19***31 | Adapter; (Compact) | 1 |
292-7974 Display Ar-Monitor -Cd700
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 19***31 | Adapter; (Compact) | 1 |
| 24***16 | Display Group-Monitor; (Cd700) | 1 |
249-7785 Display Gp-Monitor -Cb420
| 10***41 | Plate As | 1 |
| 10***50 | Latch As-Rh | 1 |
| 10***52 | Link-Tag-Rh | 1 |
286-0134 Display Gp-Monitor -Cd700c
| 10***53 | Bumper-Conical | 4 |
| 10***13 | Plate As | 2 |
| 12***28 | Seal; (17.2-cm Each) | 0 |
249-7787 Display Gp-Monitor -Display, Light Bar
| 10***41 | Plate As | 1 |
| 10***49 | Latch As; (Lh) | 1 |
| 10***51 | Link-Tag-Lh | 1 |
8x-4317 Door Gp-Cab -Rh
| 06***88 | Seal; (Use As Required) | 0 |
| 10***41 | Plate As | 1 |
| 10***50 | Latch As-Rh | 1 |
8x-4527 Door Gp-Cab -Low Profile
| 8X***27 | Door Group-Cab; -Low Profile | 1 |
| 8Y***77 | Pan As-Extension | 1 |
| 8Y***43 | Cushion Kit; (Consists Of Fastener, Cushion Assem.) | 1 |
8x-4526 Door Gp-Cab -Lh
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 10***96 | Bracket As | 6 |
| 12***54 | Duct | 1 |
8x-4318 Door Gp-Cab -Lh
| 06***88 | Seal; (Use As Required) | 0 |
| 10***41 | Plate As | 1 |
| 10***49 | Latch As; (Lh) | 1 |
8x-4413 Door Gp-Cab -High Profile
| 10***53 | Bumper-Conical | 4 |
| 10***13 | Plate As | 2 |
| 12***28 | Seal; (17.2-cm Each) | 0 |
8x-4525 Door Gp-Cab -Rh
| 13***95 | Panel As | 1 |
| 16***74 | Louver As-Vent | 2 |
| 7K***01 | Nut-Speed; (44.5mm Oal) | 2 |
177-7891 Duct & Control Gp -A/C, Heater Distributor
| 17***91 | Duct & Control Group; -A/C, Heater Distributor | 1 |
| 8Y***77 | Pan As-Extension | 1 |
| 8Y***47 | Fastener | 2 |
7i-5015 Duct Gp-Cab Air -Air Conditioner, Heater
| 17***35 | Motor Group-Electric; -Circulating Fan | 1 |
| 1B***13 | Bolt,Machine Governor And Decelerator Control | 1 |
| 1M***30 | Nut And Lock Assem.; (No. 10-32) | 2 |
8y-5959 Extension Gp-Backrest -Vinyl
| 17***34 | Fan Group-Circulating; -Defrost | 1 |
| 3E***21 | Actuator-Rocker; (Defroster) | 1 |
| 3E***25 | Lamp; (24-Volt) | 1 |
8y-5874 Extension Gp-Backrest -Cloth
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 1 |
| 13***79 | Bracket | 1 |
| 17***35 | Motor Group-Electric; -Circulating Fan | 1 |
172-6835 Fan Gp-Circulating -Rear Defroster
| 10***12 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 15***98 | Screw-Button Head; (M3x0.5x1-mm) | 4 |
| 17***35 | Fan Group-Circulating; -Rear Defroster | 1 |
170-5334 Fan Gp-Circulating -Defrost
| 11***55 | Spring-Filter | 4 |
| 13***92 | Retainer-Captive | 2 |
| 17***34 | Fan Group-Circulating; -Defrost | 1 |
172-6834 Fan Gp-Circulating -Front Defroster
| 10***12 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 15***98 | Screw-Button Head; (M3x0.5x1-mm) | 4 |
| 17***34 | Fan Group-Circulating; -Front Defroster | 1 |
170-4820 Fan Gp-Circulating
| 17***20 | Fan Group-Circulating; -Defroster, Rear-Rear | 2 |
| 3E***21 | Actuator-Rocker; (Defroster) | 1 |
| 3E***25 | Lamp; (24-Volt) | 1 |
8x-2925 Filter Gp-Cab Air
| 12***72 | Pad; (1035mm X 150mm) | 1 |
| 17***22 | Heater Group-Cab | 1 |
| 19***36 | Pad | 1 |
199-2585 Hammer & Mounting Gp -Low Profile
| 16***99 | Lines Group-Heater | 1 |
| 17***52 | Heater & Mtg Group-Cab | 1 |
| 17***91 | Duct & Control Group; -A/C, Heater Distributor | 1 |
200-7934 Hammer & Mounting Gp -High Profile
| 03***38 | Clamp | 2 |
| 10***26 | Wheel As-Blower | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
174-4552 Heater & Mtg Gp-Cab
| 15***87 | Cover | 2 |
| 17***52 | Heater & Mtg Group-Cab | 1 |
| 2G***64 | Kit-Diaphragm; (Air Horn) | 2 |
167-8395 Heater Ar-Cab
| 00***84 | Spring-Horn | 4 |
| 00***85 | Brush-Horn | 4 |
| 09***71 | Seal-Horn Button | 1 |
173-5322 Heater Gp-Cab
| 00***84 | Spring-Horn | 4 |
| 00***85 | Brush-Horn | 4 |
| 09***71 | Seal-Horn Button | 1 |
5d-6998 Horn Gp-Air
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
173-5307 Horn Gp-Air
| 17***07 | Horn Group-Air | 1 |
| 2A***84 | Bracket | 1 |
| 2G***67 | Washer; (10.5x60x3-mm Thk) | 1 |
113-5808 Housing Gp-Seat Suspension
| 11***08 | Housing Group-Seat Suspension | 1 |
| 17***41 | Module Group-Speedometer & Tach; -Cold Weather | 1 |
| 18***67 | Sensor & Mtg Group-Ground Speed | 1 |
145-1300 Installation Ar-Radio
| 11***64 | Boot | 8 |
| 14***00 | Installation Ar-Radio | 1 |
| 17***65 | Duct | 2 |
130-9432 Installation Gp-Radio
| 10***55 | Cover-Speaker | 2 |
| 10***25 | Screw-Machine; (8-32x1-In) | 8 |
| 10***14 | Knob | 4 |
185-7968 Instrument Ar -Speedometer/Tach-Eu
| 10***55 | Cover-Speaker | 2 |
| 10***25 | Screw-Machine; (8-32x1-In) | 8 |
| 10***14 | Knob | 4 |
172-5378 Insulation Gp-Weather
| 11***07 | Plate | 1 |
| 11***10 | Insulation | 1 |
| 13***09 | Pin | 2 |
191-8695 Liner Gp-Cab -High Profile
| 19***95 | Liner Group-Cab; -Open-High Profile | 1 |
| 1P***78 | Cap | 2 |
| 2G***41 | Clamp | 2 |
172-5376 Liner Gp-Cab -Enclosed Rops
| 08***91 | Bolt; (M10x1.5x55-mm) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
177-8781 Liner Gp-Cab -High Profile
| 09***44 | Elbow | 1 |
| 11***30 | Spacer; (11.3x19.05x90-mm Thk) | 1 |
| 13***96 | Valve-Ball | 1 |
167-8103 Lines Gp-Air Conditioner
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
167-8399 Lines Gp-Heater
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
191-9413 Mirror Gp-Rear View -Exterior, Heated
| 19***13 | Mirror Group-Rear View; -Exterior, Heated | 1 |
| 1P***78 | Cap | 4 |
| 20***80 | Mirror | 1 |
197-2066 Mirror Gp-Rear View -Dual Interior
| 19***82 | Module Group-Speedometer & Tach | 1 |
| 19***66 | Mirror Group-Rear View; -Dual Interior | 1 |
| 7N***76 | Lamp; (24-Volt, 0.2-Ampere)(Panel) | 2 |
193-8212 Mirror Gp-Rear View -Exterior, Heated
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
231-6524 Mirror Gp-Rear View -Exterior, Heated
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 23***24 | Mirror Group-Rear View; -Exterior, Heated | 1 |
197-2064 Mirror Gp-Rear View -Exterior, Enclosed Rops
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 19***64 | Mirror Group-Rear View; -Exterior, Enclosed Rops | 1 |
8x-2795 Mirror Gp-Rear View -Inside
| 11***18 | Arm | 2 |
| 12***86 | Block | 4 |
| 12***87 | Bracket | 4 |
180-9285 Module Gp-Quad Gauge
| 18***85 | Module Group-Quad Gauge | 1 |
| 24***01 | Plate As | 1 |
| 24***02 | Bracket As | 1 |
177-9741 Module Gp-Speedometer & Tach -Cold Weather
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 17***41 | Module Group-Speedometer & Tach; -Cold Weather | 1 |
190-3482 Module Gp-Speedometer & Tach
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 14***11 | Bolt-Socket Head; (M6x1x16-mm) | 4 |
| 19***82 | Module Group-Speedometer & Tach | 1 |
244-1904 Mounting Gp-Monitor -Cb420 Display
| 10***72 | Boss | 3 |
| 14***80 | Bracket-Mounting | 1 |
| 14***96 | Plate | 1 |
294-5261 Mounting Gp-Monitor -Cb420 Display
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 2 |
| 10***71 | Pin As | 2 |
| 10***53 | Mounting | 4 |
286-5697 Mounting Gp-Monitor -Cd700 Display
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 2 |
| 03***87 | Washer; (16.75x50.8x4.76-mm Thk) | 2 |
| 10***71 | Pin As | 2 |
167-8602 Mounting Gp-Radio
| 16***02 | Mounting Group-Radio | 1 |
| 4M***82 | Cap Screw; (Hex Head) (1/4-20x1 1/2 G 8) | 4 |
| 8C***07 | Mount; (Isolation) | 8 |
191-8692 Mounting Gp-Rops -High Profile
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***07 | Holder | 1 |
2a-6985 Mounting Gp-Rops -Enclosed
| 10***23 | Shaft As-Lumbar | 1 |
| 10***24 | Pan-Lumbar | 1 |
| 2A***85 | Mounting Group-Rops; -Enclosed | 1 |
150-1893 Mounting Gp-Vibration Isolator
| 15***93 | Mounting Group-Vibration Isolator | 1 |
| 16***83 | Knob-Lumbar | 1 |
| 16***24 | Cushion As-Back | 1 |
292-6402 Pan Gp-Backrest -Lumbar
| 00***81 | Ring-Retaining | 2 |
| 11***09 | Pan As-Seat | 1 |
| 11***67 | Kit-Back Tilt; (Includes Parts Marked N) | 1 |
178-0605 Pan Gp-Backrest -Lumbar
| 16***83 | Knob-Lumbar | 1 |
| 17***05 | Pan Group-Backrest; -Lumbar | 1 |
| 25***28 | Plug | 3 |
180-7307 Pan Gp-Backrest -Cloth
| 13***43 | Plate As-Lumbar | 1 |
| 16***83 | Knob-Lumbar | 1 |
| 18***07 | Pan Group-Backrest; -Cloth | 1 |
292-9239 Pan Gp-Backrest -Cloth
| 10***81 | Glass; (Low Profile/Rear) | 1 |
| 11***57 | Glass; (Side) | 2 |
| 14***09 | Glass; (Lower Front) | 2 |
108-8421 Pan Gp-Backrest -Lumbar
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
301-4173 Pan Gp-Backrest
| 10***72 | Glass; (Rear)(High Profile) | 1 |
| 11***06 | Glass; (Side) | 2 |
| 14***09 | Glass; (Lower Front) | 2 |
113-5810 Pan Gp-Seat
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
8x-2375 Panel Gp-Cab
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
8x-2385 Panel Gp-Cab -High Profile
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 2 |
| 13***63 | Harness As-Radio; (Radio) | 1 |
| 13***65 | Bumper | 1 |
187-3188 Panel Gp-Instrument
| 13***66 | Lead-Antenna | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***17 | Support-Radio | 1 |
197-7155 Panel Gp-Instrument -High Profile
| 19***54 | Sleeve | 1 |
| 19***55 | Panel Group-Instrument; -High Profile | 1 |
146-3090 Radio Gp -Am/Fm Cassette
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 14***90 | Radio Group; -Am/Fm Cassette | 1 |
331-5291 Radio Gp -Am/Fm/Wb/Cd Player
| 17***77 | Rops Group; -Low Profile | 1 |
| 17***78 | Insulation Group-Weather | 1 |
| 33***91 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
262-9163 Radio Gp -Am/Fm Cassette
| 17***78 | Insulation Group-Weather | 1 |
| 17***79 | Rops Group; -High Profile | 1 |
| 26***63 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
210-2270 Recliner Gp-Seat
| 16***64 | Guard Group-Platform; -Open-High Profile | 1 |
| 17***51 | Rops Group; -High Profile | 1 |
| 19***55 | Panel Group-Instrument; -High Profile | 1 |
161-1141 Rops Ar -High Profile
| 15***12 | Plate-Warning; (Ops Certification, Read Omm) | 1 |
| 16***41 | Rops Ar; -High Profile | 1 |
| 18***56 | Plate Group-Certification | 1 |
203-6642 Rops Ar -High Profile
| 10***72 | Glass; (Rear)(High Profile) | 1 |
| 11***98 | Rops Group; -High Profile, Open | 1 |
| 15***59 | Film-Instruction; (Do Not Drill, Weld Rops) | 2 |
179-3581 Rops Ar -Low Profile
| 15***12 | Plate-Warning; (Ops Certification, Read Omm) | 1 |
| 15***59 | Film-Instruction; (Do Not Drill, Weld Rops) | 2 |
| 17***76 | Liner Group-Cab; -Enclosed Rops | 1 |
173-6756 Rops Gp -High Profile
| 17***56 | Rops Group; -Enclosed, High Profile | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 1L***80 | Bolt; (7/16-20x1.5-In) | 1 |
173-2751 Rops Gp
| 13***03 | Screen Group-Sun | 1 |
| 13***05 | Plate As | 1 |
| 17***51 | Rops Group; -High Profile | 1 |
177-8779 Rops Gp -High Profile
| 0T***44 | Bolt (1.25" Long) | 1 |
| 17***79 | Rops Group; -High Profile | 1 |
| 20***88 | Bolt; (7/16-20) (44.5mml) | 1 |
172-5377 Rops Gp -Low Profile
| 15***59 | Film-Instruction; (Do Not Drill, Weld Rops) | 2 |
| 17***77 | Rops Group; -Low Profile | 1 |
| 17***31 | Wiper Group-Window; -Front-High Profile | 1 |
117-4698 Rops Gp -High Profile
| 11***98 | Rops Group; -High Profile, Open | 1 |
| 15***12 | Plate-Warning; (Ops Certification, Read Omm) | 1 |
| 18***56 | Plate Group-Certification | 1 |
139-4612 Screen Gp-Sun -Rear
| 09***78 | Pin-Spring | 1 |
| 09***14 | Pin, Clevis | 1 |
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
156-1148 Seat Belt Gp -Retractable
| 09***78 | Pin-Spring | 1 |
| 09***14 | Pin, Clevis | 1 |
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
222-0345 Seat Belt Gp -Retractable
| 0T***44 | Bolt (1.25" Long) | 1 |
| 17***84 | Extension Group-Backrest; (Cloth) | 1 |
| 17***37 | Spacer; (11.7x19.8x20.3-mm Thk)(Lh Seat Side) | 1 |
175-1504 Seat Gp -Cloth
| 09***43 | Pin-Cotter | 1 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 16***25 | Cushion As | 1 |
301-4174 Seat Gp -Cloth
| 11***42 | Armrest Group; -Lh | 1 |
| 11***45 | Armrest Group; -Rh | 1 |
| 11***00 | Suspension Group-Seat; -Cloth | 1 |
180-7306 Seat Gp -Cloth
| 11***04 | Seat Group-Suspension; -Cloth | 1 |
| 18***06 | Seat Group; -Cloth | 1 |
| 9X***41 | Screw-Truss Head (M10x1.50x20mm); (Truss Head) (M10x1.5x20mm) | 6 |
114-1185 Seat Gp -Vinyl, Lumbar
| 09***43 | Pin-Cotter | 2 |
| 11***85 | Seat Group; -Vinyl, Lumbar | 1 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
114-1183 Seat Gp -Cloth, Lumbar
| 0T***44 | Bolt (1.25" Long) | 1 |
| 11***83 | Seat Group; -Cloth, Lumbar | 1 |
| 17***84 | Extension Group-Backrest; (Cloth) | 1 |
112-9104 Seat Gp-Suspension -Cloth
| 11***04 | Seat Group-Suspension; -Cloth | 1 |
| 15***58 | Seat Group-Suspension; -Cloth, Lumbar | 1 |
| 16***25 | Kit-Slider Block; (Seat) | 1 |
112-9105 Seat Gp-Suspension -Vinyl
| 11***05 | Seat Group-Suspension; -Vinyl | 1 |
| 11***42 | Armrest Group; -Lh | 1 |
| 11***45 | Armrest Group; -Rh | 1 |
154-5732 Seat Gp-Suspension -Cloth
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 1 |
| 15***32 | Seat Group-Suspension; -Cloth | 2 |
| 15***29 | Grommet | 1 |
200-3814 Seat Gp-Suspension -Cloth, Air
| 10***17 | Bumper | 4 |
| 12***57 | Shaft | 2 |
| 12***28 | Kit-Roller; (Incls Parts Marked S) | 1 |
8y-4951 Seat Gp-Suspension -Vinyl
| 15***58 | Seat Group-Suspension; -Cloth, Lumbar | 1 |
| 15***59 | Suspension Group-Seat; -Air | 1 |
| 16***25 | Kit-Slider Block; (Seat) | 1 |
156-7778 Seat Gp-Suspension -Cloth, Lumbar
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
8y-4194 Seat Gp-Suspension -Cloth
| 11***42 | Armrest Group; -Lh | 1 |
| 11***45 | Armrest Group; -Rh | 1 |
| 11***00 | Suspension Group-Seat; -Cloth | 1 |
155-5958 Seat Gp-Suspension -Cloth, Lumbar
| 12***18 | Cover | 1 |
| 12***01 | Seal | 1 |
| 12***08 | Tube As | 2 |
174-4546 Support Gp-Seat
| 10***03 | Fastener | 26 |
| 14***26 | Film-Instruction; (Seat Adjustment) | 1 |
| 16***35 | Spring | 1 |
273-2820 Suspension Gp-Seat
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 27***20 | Suspension Group-Seat | 1 |
155-5959 Suspension Gp-Seat -Air
| 12***21 | Bolt | 3 |
| 15***59 | Suspension Group-Seat; -Air | 1 |
| 2D***06 | Pin | 1 |
113-5800 Suspension Gp-Seat
| 11***00 | Suspension Group-Seat; -Cloth | 1 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 1 |
| 4D***35 | Seat-Spring | 1 |
5d-4382 Valve Gp-Air Control -Parking Brake
| 10***45 | Cover | 1 |
| 10***65 | Pad; (Round) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
8x-2650 Valve Gp-Air Control
| 14***95 | Hose; (650-cm Each) | 0 |
| 3V***16 | Nozzle As; (Rear) | 1 |
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
188-9250 Valve Gp-Solenoid
| 10***58 | Nut; (10x32-mm) | 2 |
| 10***46 | Stop-Slide | 2 |
| 13***32 | Latch As | 1 |
185-0008 Valve Gp-Solenoid
| 10***58 | Nut; (10x32-mm) | 2 |
| 10***46 | Stop-Slide | 2 |
| 13***32 | Latch As | 1 |
8x-9680 Washer Gp-Window -Rear
| 13***32 | Window Group-Cab; -Side Sliding-High Profile | 2 |
| 8X***80 | Washer Group-Window; -Rear | 1 |
8x-9675 Washer Gp-Window -Front
| 13***33 | Window Group-Cab; -Side Sliding-Low Profile | 2 |
| 8X***75 | Washer Group-Window; -Front-Low Profile | 1 |
139-6128 Window Gp-Cab -Side Sliding
| 13***28 | Window Group-Cab; -Side Sliding-Low Profile | 1 |
| 15***06 | Window Group-Cab; -Rh | 1 |
| 15***07 | Window Group-Cab; -Lh | 1 |
134-8232 Window Gp-Cab -Side Sliding High Profile
| 12***08 | Spacer; (10.31x17.45x50.8-mm Thk) | 1 |
| 12***09 | Plate | 1 |
| 12***10 | Plate | 1 |
139-6129 Window Gp-Cab -Side Sliding High Profile
| 13***29 | Window Group-Cab; -Side Sliding High Profile | 1 |
| 17***20 | Wiper Group-Window; -Rear-Low Profile | 1 |
| 8X***80 | Washer Group-Window; -Rear | 1 |
150-5107 Window Gp-Cab -Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
| 15***07 | Window Group-Cab; -Lh | 1 |
150-5106 Window Gp-Cab -Rh
| 15***06 | Window Group-Cab; -Rh | 1 |
| 17***21 | Wiper Group-Window; -Rear-High Profile | 1 |
| 8X***80 | Washer Group-Window; -Rear | 1 |
134-8233 Window Gp-Cab
| 12***08 | Spacer; (10.31x17.45x50.8-mm Thk) | 1 |
| 12***09 | Plate | 1 |
| 12***10 | Plate | 1 |
126-0961 Window Gp-Vent -Vent
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***85 | Wiper Group-Window | 1 |
| 12***54 | Arm-Window Wiper; (Front, Lower) | 2 |
177-8831 Wiper Ar-Window -Rear
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***85 | Wiper Group-Window | 1 |
| 12***54 | Arm-Window Wiper; (Front, Lower) | 2 |
177-8830 Wiper Ar-Window -Rear
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***54 | Arm-Window Wiper; (Front, Lower) | 2 |
| 12***55 | Blade As-Wiper; (335-mm)(High Profile Front Lower) | 2 |
173-5321 Wiper Gp-Window -Rear
| 17***21 | Wiper Group-Window; -Rear-High Profile | 1 |
| 1J***62 | Bolt-Plow | 20 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 42 |
177-8784 Wiper Gp-Window -Intermittent, Front
| 17***84 | Wiper Group-Window; -Intermittent, Front | 1 |
| 4T***11 | Edge-Cutting | 2 |
172-6831 Wiper Gp-Window -Front
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***85 | Knob-Wiper Switch; (Rear) | 1 |
172-6830 Wiper Gp-Window -Front
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***85 | Knob-Wiper Switch; (Rear) | 1 |
173-5320 Wiper Gp-Window -Rear
| 06***60 | Ring-Retaining | 1 |
| 15***14 | Adapter; (4-Ft)(Outside) | 4 |
| 17***20 | Wiper Group-Window; -Rear-Low Profile | 1 |
114-6685 Wiper Gp-Window
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***85 | Wiper Group-Window | 1 |
| 12***54 | Arm-Window Wiper; (Front, Lower) | 2 |
Power Train
2p-6899 Case Gp-Transmission
| 0L***61 | Pin-Dowel; (9.4mm X 22mm) | 2 |
| 1P***94 | Sleeve | 4 |
| 2P***19 | Tube | 1 |
6g-1740 Chain Gp-Drive
| 6G***01 | Chain Group | 4 |
| 6G***02 | Link-Connecting; (Master) | 1 |
| 6G***40 | Chain Group | 1 |
173-5334 Control Gp-Differential Lock
| 13***72 | Hose As | 1 |
| 17***34 | Control Group-Differential Lock | 1 |
| 17***05 | Valve & Mtg Group-Diff Lock | 1 |
8e-4132 Control Gp-Transmission Hyd
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 4 |
| 11***75 | Valve Group-Relief; -Main | 1 |
| 1T***16 | Bolt; (5/16-18x0.75-In)(12 Point Hd) | 1 |
231-6018 Coupling Gp-Torsional
| 0S***79 | Bolt 5.08 cm(2 In.) Long | 1 |
| 20***56 | Coupling; (Flywheel) | 1 |
| 23***18 | Coupling Group-Torsional | 1 |
227-2564 Cover Gp-Shipping
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 6 |
| 19***41 | Cover-Shipping | 1 |
8d-4290 Differential & Bevel Gear Gp
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 6 |
8d-4300 Differential Gp
| 11***09 | Spider | 1 |
| 17***21 | Bearing-Sleeve | 1 |
| 1A***51 | Bolt,Machine Hydraulic Tank Mtg | 8 |
204-5851 Filler Gp-Power Train Oil
| 20***51 | Filler Group-Power Train Oil | 1 |
| 20***06 | Tube As | 1 |
| 20***07 | Tube As | 1 |
172-4662 Filter Gp-Oil -Transmission
| 17***62 | Filter Group-Oil; -Transmission | 1 |
| 1R***19 | Filter Element As-Oil; (Standard Efficiency)(Power Train) | 1 |
| 2J***56 | Ring-Retaining | 1 |
5t-7158 Drive Gp-Final
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 16 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 10 |
| 1D***09 | Bolt Canopy Assembly To Mounting Brackets; Bolt-Canopy Assembly To Mounting Brackets | 40 |
186-4872 Gear & Case Gp-Transfer
| 0L***15 | Bolt 88.90 mm(3.50 In.) N.F. | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 7 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 11 |
6i-9851 Lines Gp-Power Train Oil
| 0S***73 | Bolt (102mm Long); (1/2-13x4-In) | 2 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
142-6206 Mounting Gp-Wheel
| 14***06 | Mounting Group-Wheel | 1 |
| 5D***64 | Washer-Hard; (34x57x8-mm Thk) | 60 |
| 5D***65 | Nut-Full; (1-5/16-12-Thd) | 60 |
2p-5800 Planetary Gp-Transmission
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 8 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 30 |
178-9178 Pump Gp-Gear -2 Section
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 4 |
| 17***75 | Cover | 1 |
194-5867 Tandem & Cover Gp
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 2 |
| 10***36 | Cover | 2 |
| 19***67 | Tandem & Cover Group | 1 |
183-6616 Transmission Ar
| 17***62 | Filter Group-Oil; -Transmission | 1 |
| 17***78 | Pump Group-Gear; -2 Section | 1 |
| 18***16 | Transmission Ar | 1 |
231-6016 Transmission Ar
| 18***16 | Transmission Ar | 1 |
| 23***16 | Transmission Ar | 1 |
| 23***18 | Coupling Group-Torsional | 1 |
174-3705 Valve & Mtg Gp-Diff Lock
| 14***16 | Manifold | 1 |
| 15***64 | Valve Group-Solenoid | 1 |
| 17***05 | Valve & Mtg Group-Diff Lock | 1 |
2p-4548 Valve Gp-Control
| 1P***74 | Pin-Valve Spring | 1 |
| 2P***48 | Valve As | 1 |
| 3H***56 | Pin | 1 |
2p-5814 Valve Gp-Selector & Press Cont -Direction
| 1P***85 | Spool | 1 |
| 1T***16 | Bolt; (5/16-18x0.75-In)(12 Point Hd) | 4 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 1 |
2p-5816 Valve Gp-Selector & Press Cont -Modulating Reducing-Speed
| 1L***69 | Ring-Retaining | 1 |
| 1S***36 | Retainer | 1 |
| 1S***38 | Ring-Retaining | 1 |
8e-4130 Valve Gp-Pilot -Speed Select
| 2H***65 | Pin (Spring) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 3P***62 | Stop | 1 |
244-4120 Valve Gp-Pilot -Pressure, Flow Compensator
| 24***20 | Valve Group-Pilot; -Pressure, Flow Compensator | 1 |
| 8T***42 | Bolt-Socket Hd; (M6 X 1.0 X 30) | 4 |
| 9X***80 | Seal-O-Ring | 3 |
115-1375 Valve Gp-Relief -Main
| 11***24 | Body-Relief Valve | 1 |
| 11***75 | Valve Group-Relief; -Main | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 10 |
8p-1100 Valve Gp-Selector & Press Cont -Manual Modulating-Differential-Speed
| 1P***61 | Spool-Differential Safety | 1 |
| 1T***16 | Bolt; (5/16-18x0.75-In)(12 Point Hd) | 7 |
| 2H***32 | Seal--To Bottom Cover On Selector Valve | 1 |
154-3064 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 14***50 | Cartridge As | 1 |
8e-4131 Valve Gp-Transmission Control
| 0A***64 | Clip Diode Uoc:Bsv,Bsx | 1 |
| 2P***14 | Valve Group; -Direction | 1 |
| 2P***16 | Valve Group; -Modulating Reducing-Speed | 1 |
163-6129 Wheel & Tire Ar
| 13***37 | Tire; (23.5-25) | 1 |
| 16***29 | Wheel & Tire Ar | 1 |
| 16***30 | Wheel & Tire Group | 6 |
152-3974 Wheel & Tire Ar
| 14***22 | Wheel & Tire Group | 6 |
| 15***74 | Wheel & Tire Ar | 1 |
191-2313 Wheel & Tire Ar
| 19***12 | Wheel & Tire Group | 6 |
| 19***13 | Wheel & Tire Ar | 1 |
157-1739 Wheel & Tire Ar
| 15***38 | Wheel & Tire Group | 6 |
| 15***39 | Wheel & Tire Ar | 1 |
152-3971 Wheel & Tire Ar
| 14***19 | Wheel & Tire Group | 6 |
| 15***71 | Wheel & Tire Ar | 1 |
258-6477 Wheel & Tire Ar
| 25***77 | Wheel & Tire Ar | 1 |
| 25***41 | Wheel & Tire Group | 6 |
152-3988 Wheel & Tire Ar
| 14***33 | Wheel & Tire Group | 6 |
| 15***88 | Wheel & Tire Ar | 1 |
258-6491 Wheel & Tire Ar
| 25***91 | Wheel & Tire Ar | 1 |
| 25***42 | Wheel & Tire Group | 6 |
152-3977 Wheel & Tire Ar
| 14***24 | Wheel & Tire Group | 6 |
| 15***77 | Wheel & Tire Ar | 1 |
173-0978 Wheel & Tire Ar
| 17***78 | Wheel & Tire Ar | 1 |
| 17***80 | Wheel & Tire Group | 6 |
268-9657 Wheel & Tire Ar
| 26***57 | Wheel & Tire Ar | 1 |
| 26***59 | Wheel & Tire Group | 6 |
152-3975 Wheel & Tire Ar
| 14***23 | Wheel & Tire Group | 6 |
| 15***75 | Wheel & Tire Ar | 1 |
252-0559 Wheel & Tire Ar
| 25***58 | Wheel & Tire Group | 6 |
| 25***59 | Wheel & Tire Ar | 1 |
152-3979 Wheel & Tire Ar
| 14***26 | Wheel & Tire Group | 6 |
| 15***79 | Wheel & Tire Ar | 1 |
171-4714 Wheel & Tire Ar
| 17***13 | Wheel & Tire Group | 6 |
| 17***14 | Wheel & Tire Ar | 1 |
169-8566 Wheel & Tire Ar
| 16***66 | Wheel & Tire Ar | 1 |
| 17***38 | Wheel & Tire Group | 6 |
152-3967 Wheel & Tire Ar
| 14***18 | Wheel & Tire Group | 6 |
| 15***67 | Wheel & Tire Ar | 1 |
152-4008 Wheel & Tire Ar
| 14***38 | Wheel & Tire Group | 6 |
| 15***08 | Wheel & Tire Ar | 1 |
196-4928 Wheel & Tire Ar
| 19***27 | Wheel & Tire Group | 6 |
| 19***28 | Wheel & Tire Ar | 1 |
197-7918 Wheel & Tire Ar
| 19***16 | Wheel & Tire Group | 6 |
| 19***18 | Wheel & Tire Ar | 1 |
167-0694 Wheel & Tire Ar
| 16***93 | Wheel & Tire Group | 6 |
| 16***94 | Wheel & Tire Ar | 1 |
200-2675 Wheel & Tire Ar
| 20***74 | Wheel & Tire Group | 6 |
| 20***75 | Wheel & Tire Ar | 1 |
205-2197 Wheel & Tire Ar
| 20***97 | Wheel & Tire Ar | 1 |
| 20***98 | Wheel & Tire Group | 6 |
152-4000 Wheel & Tire Ar
| 14***34 | Wheel & Tire Group | 6 |
| 15***00 | Wheel & Tire Ar | 1 |
295-0033 Wheel & Tire Ar
| 29***32 | Wheel & Tire Group | 6 |
| 29***33 | Wheel & Tire Ar | 1 |
152-3965 Wheel & Tire Ar
| 14***17 | Wheel & Tire Group | 6 |
| 15***65 | Wheel & Tire Ar | 1 |
152-3987 Wheel & Tire Ar
| 14***32 | Wheel & Tire Group | 6 |
| 15***87 | Wheel & Tire Ar | 1 |
167-0693 Wheel & Tire Gp
| 10***11 | Tire; (18-R25) | 1 |
| 14***33 | Wheel Group | 1 |
| 16***93 | Wheel & Tire Group | 1 |
163-6130 Wheel & Tire Gp
| 13***37 | Tire; (23.5-25) | 1 |
| 16***30 | Wheel & Tire Group | 1 |
| 22***85 | Wheel Group | 1 |
171-4713 Wheel & Tire Gp
| 12***31 | Tire; (23.5-25) | 1 |
| 17***13 | Wheel & Tire Group | 1 |
| 22***85 | Wheel Group | 1 |
170-0438 Wheel & Tire Gp
| 17***38 | Wheel & Tire Group | 1 |
| 17***39 | Tire; (25.5 R25 * Egl-4) | 1 |
| 22***85 | Wheel Group | 1 |
142-6418 Wheel & Tire Gp
| 14***52 | Tire; (18.00-25 12pr E-2 404-799) | 1 |
| 14***33 | Wheel Group | 1 |
| 14***18 | Wheel & Tire Group | 1 |
252-0558 Wheel & Tire Gp
| 20***32 | Tire; (23.5-R25) | 1 |
| 22***85 | Wheel Group | 1 |
| 25***58 | Wheel & Tire Group | 1 |
142-6438 Wheel & Tire Gp
| 14***36 | Tire; (23.5-R25) | 1 |
| 14***38 | Wheel & Tire Group | 1 |
| 22***85 | Wheel Group | 1 |
142-6423 Wheel & Tire Gp
| 12***25 | Tire; (23.5-25)(23.50-25 12pr D/L-2a) | 1 |
| 14***23 | Wheel & Tire Group | 1 |
| 22***85 | Wheel Group | 1 |
173-0980 Wheel & Tire Gp
| 14***33 | Wheel Group | 1 |
| 17***80 | Wheel & Tire Group | 1 |
| 17***83 | Tire; (18.00-25 16pr E/L2) | 1 |
142-6432 Wheel & Tire Gp
| 14***32 | Wheel & Tire Group | 1 |
| 22***85 | Wheel Group | 1 |
| 22***86 | Flange As | 1 |
142-6419 Wheel & Tire Gp
| 14***53 | Tire; (18.00-25 12pr E-2) | 1 |
| 14***33 | Wheel Group | 1 |
| 14***19 | Wheel & Tire Group | 1 |
142-6417 Wheel & Tire Gp
| 14***38 | Tire; (18-25) | 1 |
| 14***33 | Wheel Group | 1 |
| 14***17 | Wheel & Tire Group | 1 |
142-6433 Wheel & Tire Gp
| 14***33 | Wheel & Tire Group | 1 |
| 22***85 | Wheel Group | 1 |
| 2D***43 | Seal-O-Ring | 1 |
142-6434 Wheel & Tire Gp
| 14***34 | Wheel & Tire Group | 1 |
| 22***85 | Wheel Group | 1 |
| 2D***43 | Seal-O-Ring | 1 |
258-6541 Wheel & Tire Gp
| 22***85 | Wheel Group | 1 |
| 25***83 | Tire; (23.5-R25) | 1 |
| 25***41 | Wheel & Tire Group | 1 |
268-9659 Wheel & Tire Gp
| 14***33 | Wheel Group | 1 |
| 26***87 | Tire; (23.5-25) | 1 |
| 26***59 | Wheel & Tire Group | 1 |
142-6422 Wheel & Tire Gp
| 12***27 | Tire; (23.5-25)(23.50-25 12pr D/L-2a) | 1 |
| 14***22 | Wheel & Tire Group | 1 |
| 22***85 | Wheel Group | 1 |
205-2198 Wheel & Tire Gp
| 20***36 | Tire; (23.5-25 20pr L-5) | 1 |
| 20***98 | Wheel & Tire Group | 1 |
| 22***85 | Wheel Group | 1 |
196-4927 Wheel & Tire Gp
| 10***59 | Tire; (23.5-R25) | 1 |
| 19***27 | Wheel & Tire Group | 1 |
| 22***85 | Wheel Group | 1 |
191-2312 Wheel & Tire Gp
| 16***62 | Tire; (23.5-R25) | 1 |
| 19***12 | Wheel & Tire Group | 1 |
| 22***85 | Wheel Group | 1 |
157-1738 Wheel & Tire Gp
| 11***63 | Tire; (23.5-R25) | 1 |
| 15***38 | Wheel & Tire Group | 1 |
| 22***85 | Wheel Group | 1 |
142-6426 Wheel & Tire Gp
| 12***28 | Tire; (23.50-25 12pr D/L-3a) | 1 |
| 14***26 | Wheel & Tire Group | 1 |
| 22***85 | Wheel Group | 1 |
142-6424 Wheel & Tire Gp
| 12***26 | Tire; (23.50-25 12pr D/L-2a) | 1 |
| 14***24 | Wheel & Tire Group | 1 |
| 22***85 | Wheel Group | 1 |
200-2674 Wheel & Tire Gp
| 14***34 | Wheel Group | 1 |
| 1J***87 | Flange | 2 |
| 20***74 | Wheel & Tire Group | 1 |
295-0032 Wheel & Tire Gp
| 14***92 | Tire; (23.5-25) | 1 |
| 22***85 | Wheel Group | 1 |
| 29***32 | Wheel & Tire Group | 1 |
258-6542 Wheel & Tire Gp
| 22***85 | Wheel Group | 1 |
| 25***84 | Tire; (23.5-R25) | 1 |
| 25***42 | Wheel & Tire Group | 1 |
197-7916 Wheel & Tire Gp
| 19***16 | Wheel & Tire Group | 1 |
| 19***68 | Tire; (23.5-R25) | 1 |
| 22***85 | Wheel Group | 1 |
142-6425 Wheel & Tire Gp
| 12***30 | Tire; (23.5-25)(23.50-25 12pr D/L-3a) | 1 |
| 14***25 | Wheel & Tire Group | 1 |
| 22***85 | Wheel Group | 1 |
150-5143 Wheel Ar
| 15***42 | Wheel Group | 6 |
| 15***43 | Wheel Ar | 1 |
151-0288 Wheel Ar
| 15***44 | Wheel Group | 6 |
| 15***88 | Wheel Ar | 1 |
150-5144 Wheel Gp
| 15***44 | Wheel Group | 1 |
| 22***85 | Wheel Group | 1 |
| 2D***43 | Seal-O-Ring | 1 |
150-5142 Wheel Gp
| 14***33 | Wheel Group | 1 |
| 15***42 | Wheel Group | 1 |
| 2D***43 | Seal-O-Ring | 1 |
226-1885 Wheel Gp
| 22***85 | Wheel Group | 1 |
| 22***86 | Flange As | 1 |
| 22***02 | Rim As; (19.5x25) | 1 |
142-6233 Wheel Gp
| 14***33 | Wheel Group | 1 |
| 1J***87 | Flange | 2 |
| 7D***69 | Ring-Lock | 1 |
Service Equipment And Supplies
136-4832 Box Gp-Tool
| 13***32 | Box Group-Tool | 1 |
| 19***68 | Coupler-Grease | 1 |
| 19***69 | Hose As | 1 |
207-1980 Film Gp -Non Vhp
| 15***20 | Plate-Rops/Fops | 1 |
| 20***26 | Plate-Warning; (No Clearance) | 2 |
| 20***80 | Film Group; -Non Vhp | 1 |
207-1764 Film Gp -Vhp
| 19***86 | Film; (Safety) (To Right And Left Of Fuel Tank) | 2 |
| 19***74 | Film-Stripe; (Yellow, Reflective)(Fender) | 6 |
| 19***67 | Plate | 2 |
183-5812 Film Gp
| 18***12 | Film Group | 2 |
| 19***38 | Film; (Warning) (Coolant) (To Right Side Of Radiator Fill Cover) | 1 |
| 19***86 | Film; (Safety) (To Right And Left Of Fuel Tank) | 2 |
8f-9866 Grease Gun Gp
| 15***26 | Plate-Warning-Rops/Fops; (Rops, Fops) | 1 |
| 20***33 | Plate-Warning; (No Clearance) | 2 |
| 21***37 | Film-Warning; (Cable Connection) | 1 |
206-1407 Plate & Film Gp -German
| 20***07 | Plate & Film Group; -German | 1 |
249-6529 Plate & Film Gp -Turkish
| 24***29 | Plate & Film Group; -Turkish | 1 |
206-1404 Plate & Film Gp -French
| 20***21 | Plate-Main Frame; (Do Not Drill Or Weld) | 1 |
| 20***29 | Film-Warning; (Hazard, Read Omm) | 1 |
| 20***32 | Film-Warning; (Spring Loaded Pin, Read Manual) | 1 |
206-1406 Plate & Film Gp -Portuguese
| 20***06 | Plate & Film Group; -Portuguese | 1 |
206-1405 Plate & Film Gp -Spanish
| 18***30 | Strap Wrench Assem. | 1 |
| 1P***45 | Gauge Group-Pressure | 1 |
| 1S***59 | Socket Wrench (1/2 Inch Opening) | 1 |
171-5838 Plate & Film Gp
| 15***24 | Plate-Rops/Fops | 1 |
| 17***38 | Plate & Film Group | 1 |
| 20***31 | Plate-Warning; (No Clearance) | 2 |
192-1434 Plate & Film Gp -Reflector
| 15***21 | Plate-Rops/Fops | 1 |
| 19***34 | Plate & Film Group; -Reflector-Eu | 1 |
| 20***27 | Plate-Warning; (No Clearance) | 2 |
211-0617 Tool Gp-Hand
| 21***17 | Tool Group-Hand | 1 |
Work Tools
107-3414 Bit Gp
| 10***14 | Bit Group | 1 |
| 2A***38 | Bolt-(3/4" X 2-1/4")-Rops Mounting Bracket To Fender | 4 |
| 2B***15 | Bolt 165 mm(6.5 In.)Long; 165.1mm(6.5 In.)Long | 4 |
8w-8424 Blade Gp
| 12***75 | Cam As | 2 |
| 12***73 | Link As | 2 |
| 1K***72 | Locknut Horn To Guard | 2 |
107-3423 Edge Gp-Cutting
| 10***23 | Edge Group-Cutting | 1 |
| 1D***12 | Bolt 4 In. (102.0 mm) Long Rear Bracket Assembly To Frame | 4 |
| 25***50 | Plate | 1 |
107-3429 Edge Gp-Cutting
| 10***29 | Edge Group-Cutting | 1 |
| 11***64 | Cylinder Group-Ripper | 1 |
| 20***01 | Mounting Group-Ripper | 1 |
8d-4885 Lift Gp-Blade
| 19***86 | Film; (Safety) (To Right And Left Of Fuel Tank) | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
| 2K***03 | Washer (Bar) | 1 |
207-2801 Mounting Gp-Ripper
| 11***58 | Pin; (G.E.T.) | 1 |
| 11***59 | Retainer Assembly; (G.E.T.) | 1 |
| 20***01 | Mounting Group-Ripper | 1 |
258-8447 Mounting Gp-Snow Wing
| 25***47 | Mounting Group-Snow Wing | 1 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 4 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 4 |
207-2428 Ripper Ar
| 20***28 | Ripper Ar | 1 |
| 20***26 | Film-Stripe | 2 |
| 20***28 | Film-Caterpillar | 1 |
8j-5274 Ripper Gp
| 11***24 | Film-Vhp; (On Both Sides Of Platform) | 2 |
| 11***52 | Plate & Film Group; -Engine Information | 1 |
| 23***21 | Software Group-Power Train; (Variable Horsepower) | 1 |
8j-2189 Tooth Gp-Ripper
| 11***52 | Plate & Film Group; -Engine Information | 1 |
| 8J***89 | Tooth Group-Ripper; -Straight | 1 |
C-12 serial number reference
The engine serial number (ESN) plate sits on the C-12 intake manifold/valve cover area, or is stamped into the lower right (exhaust) side of the block near the rear, above the oil pan; clean off grease and paint to read it. The number reads as a 3-character alpha-numeric prefix followed by a sequential build number, e.g. 2KS12345 — the prefix identifies the specific engine build lot (truck, marine, industrial, or genset rating) rather than the calendar year, so match it against a Caterpillar prefix chart or have a dealer decode it. On-highway C-12 production ran from the mid-1990s through the early-to-mid 2000s before the C-13 succeeded it; Caterpillar exited on-highway diesel production entirely by around 2009-2010.
| Prefix | Identifies | Notes |
|---|---|---|
| 1YN | C-12 on-highway truck engine | Early-production truck engine build lot from the mid-1990s truck engine lineup. |
| 2KS | C-12 on-highway truck engine | Truck engine build lot, later production run than 1YN. |
| 8YF | C-12 on-highway truck engine | Truck engine build lot. |
| 9NS | C-12 on-highway truck engine | Truck engine build lot. |
| 9SM | C-12 on-highway truck engine | Truck engine build lot. |
| CPD | C-12 on-highway truck engine | Truck engine build lot. |
| MBL | C-12 on-highway truck engine | Truck engine build lot. |
| TME | C-12 on-highway truck engine | Truck engine build lot, later production run. |
| ALS | C-12 on-highway truck engine | Truck engine build lot; also seen on factory reman/exchange C-12 long blocks carrying this prefix. |
| GEP | C-12 on-highway truck engine | Truck engine build lot; thinner documentation than the core prefixes. Confirm with dealer. |
| C1Z | C-12 marine propulsion engine | Marine-rated C-12. |
| 9HP | C-12 marine propulsion engine | Marine-rated C-12. |
| BDL | C-12 industrial engine | Stationary/industrial-duty C-12, non-generator application. |
| BCY | C-12 generator set engine | Genset-rated C-12 for standby/prime power packages, seen on new-engine stock carrying this prefix. |
Frequently asked questions
What engine does the Caterpillar C-12 use?
The C-12 is the engine itself, not a machine that carries a separate power unit. It is a 12.0 liter (732 cu in) inline-six diesel with direct fuel injection and turbocharged, air-to-air aftercooled induction. On-highway ratings from 2003 onward added ACERT technology with variable valve actuation and a diesel oxidation catalyst to meet tightening emissions rules.
What is the operating weight of the Caterpillar C-12?
As an engine rather than a self-propelled machine, the closest figure is net dry weight, which runs close to 940 kg (2,070 lb) for the base long block with standard equipment. Marine and industrial packages with a heat exchanger, marine transmission, or added accessories weigh more than that baseline, so treat this as a starting figure and confirm against the specific rating plate.
What replaced the Caterpillar C-12?
Caterpillar replaced the C-12 in its on-highway lineup with the C-13 as part of a mid-2000s, emissions-driven overhaul of the engine range, while the larger C-15 continued the role the 3406E had held at the top of the lineup. Caterpillar kept supporting marine and industrial C-12 packages afterward through its own service literature even as on-highway production wound down.
What C-12 owners discuss
What's the biggest recurring complaint about the C-12's charge air cooler?
Owners and shops consistently flag the charge air cooler (intercooler) as this engine's weak point. Early- and mid-production coolers trap condensation and corrode internally, eventually dumping water or oil into the intake tract, which can bend a rod or hydraulic-lock a cylinder. The cooler design went through several revisions from the mid-1990s into the mid-2000s before a version considered reliable was settled on. On any C-12 built before roughly 2007, pressure-test the charge air cooler for leaks and check the intake elbow for water or oil residue as part of routine service. Have your dealer verify cooler condition before it fails catastrophically.
Why do C-12 head gaskets get singled out as a weak spot?
Shops that see a lot of C-12 work report head gasket failure as one of the more common repairs on this engine, more so than on related Cat platforms of the era. The consensus points to a clamping/sealing issue at the head-to-block joint that shows up under sustained high load or high horsepower ratings, and it worsens if the engine has ever run hot enough to warp a head. Watch for coolant loss with no external leak, discolored oil, or overheating with no obvious cause. Have your dealer verify with a combustion leak test before condemning the head.
Engine cranks fine but won't start, or shuts down on its own while running - what's the usual sensor culprit?
The engine speed/timing sensor pair near the front cover and timing gear area is the common suspect. The ECM needs a valid signal from both sensors; lose both while running and the ECM cuts fuel injection and shuts the engine down, lose both at cranking and it won't start at all. Owners report the wiring harness in this area gets soaked in oil residue and metal debris over time, corroding connectors and pins. Cleaning and inspecting the sensor harness for oil contamination and corrosion is the first troubleshooting step before swapping sensors. Have your dealer verify sensor calibration and wiring integrity, since misdiagnosis here often leads to needless parts-swapping.
What wear pattern shows up around the front cover and oil pump on higher-hour C-12s?
Oil seepage at the front structure-to-block joint and around the external oil pump's O-rings is a recognized pattern on engines with meaningful hours or mileage. Left alone, a leaking pump O-ring can let the pump pull air and drop oil pressure at idle. Metal debris generated by normal wear tends to migrate to this area and stick to the timing sensors, which compounds the sensor problems owners describe separately. Regular inspection of this area during oil changes catches it before it turns into a low oil pressure complaint.
Truck or unit runs fine at idle but misses or loses power under load - what do owners check first?
Consensus on the trucking and equipment boards is to check fuel supply pressure before assuming injector failure. Spec is roughly 448-620 kPa (65-90 psi) at the rail; anything low points to a clogged inlet line, a weak fuel transfer pump, or a failing pressure regulator, and any of those can mimic a bad injector under load. A single failing injector can also cause a load-only miss on its own. Rule out fuel supply pressure and air intrusion on the suction side before pulling injectors.
Does the C-12 carry the same emissions-system headaches people complain about on Cat's ACERT engines?
No, and this gets confused often. On-highway C-12 production wound down by roughly 2002-2003, before Caterpillar's ACERT emissions architecture (EGR, regeneration aftertreatment) arrived on the C13/C15 that followed it. The C-12 is a simpler single-turbo, non-EGR design, so it doesn't carry the aftertreatment failures and shutdown complaints tied to later ACERT-era lawsuits. Reliability discussion around the C-12 centers on the charge air cooler and head gasket issues, not emissions-system faults. This holds across on-highway, industrial, and marine versions of the engine, which share the same 12.0-liter inline-six base.
What should a buyer check before purchasing a used C-12?
Community checklist: pull maintenance records and confirm valve lash was checked at recommended intervals (first service, then roughly every 1,000-3,000 hours); pressure-test the charge air cooler and look for water or oil residue in the intake piping; check for coolant-in-oil or oil-in-coolant signs of head gasket trouble; verify oil pressure with a mechanical test gauge rather than trusting the dash light or sender, since sending units are a known source of false low readings; inspect the front cover area for oil seepage and check timing-sensor wiring for oil contamination and corrosion; and ask where the engine sits relative to its inframe interval, since owners commonly report roughly 1,370,000-1,610,000 km (850,000-1,000,000 mi) before a rebuild becomes likely, though this varies by application and duty cycle. Have your dealer verify overall engine health with a full inspection and oil analysis before final purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar C-12. Related factory variants of the same model family:
C12C-12C-12C-12C-12C-12
Need a specific C-12 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.