Caterpillarasphalt paver
Caterpillar BG555E
Maintenance schedule, common problems & OEM parts breakdown
The Cat BG555E is a mid-size asphalt paver in Caterpillar's Barber-Greene-badged paving line, sharing its tractor platform with the AP555E as a badge-twin configuration variant. Both run the same Cat C4.4 ACERT four-cylinder turbocharged diesel rated 106 kW (142 hp SAE) at Tier 3/Stage IIIA emissions, mated to a Mobil-Trac rubber-track undercarriage. Operating weight spans roughly 12,590-17,710 kg (27,760-39,050 lb) depending on screed model and hydraulic-extension equipment fitted. Caterpillar introduced this E-series 500/555 size class around 2010 as the paver line moved to Tier 3 ACERT power; no confirmed lettered (D-suffix) predecessor is documented for this specific size class, which filled a slot between Cat's larger 600-and-up pavers and its compact mini-paver models. The BG555E paired with the SE47 screed family (V, VT and FM variants), giving a standard hydraulic-extending paving width of 2.4-4.7 m (7'10"-15'5") and bolt-on extensions out to roughly 6.1-6.2 m (20'-20'4") maximum, with paving depths to 250 mm (10 in). Dual operator stations with the Advisor Monitoring System, tilting consoles, an onboard fumes-extraction system and independent auger/conveyor material-handling controls were standard across the configuration range.
Caterpillar carried the same C4.4 ACERT powertrain and Mobil-Trac undercarriage through the whole E-series run before replacing it with the Tier 4 Final AP555F (and wheeled AP500F) generation in the mid-2010s, which stepped up to roughly 110 kW (148 hp) and swapped the fuel-fired screed heater for a quick-heating electric screed reaching paving temperature in about 15 minutes versus 30-45 minutes on the E-series. That heating-system change is the main practical dividing line for anyone sourcing parts or screeds secondhand: E-series burner, igniter and fuel-fired heater-control components do not interchange with F-series electric elements. In the used and parts market, BG555E/AP555E units remain common on resale lots as an affordable, mechanically simple mid-size track paver. The Tier 3 fuel system with no DEF or aftertreatment, combined with a paver-and-screed combined weight in the 15-17 t range, keeps both acquisition and running costs low relative to Tier 4 Final replacements, while the shared C4.4 engine and Mobil-Trac driveline mean maintenance parts and service knowledge carry over cleanly across Caterpillar's broader compact-paver family.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar BG555E specifications
Engine
| Engine model | Cat C4.4 with ACERT Technology (4.4 L / 269 in³, 4-cylinder turbocharged diesel, common rail fuel system) |
| Gross power | 106 kW (142 hp SAE gross / 144 hp DIN/metric gross) |
| Net power | Not published in factory literature for this generation |
| Displacement | 4.4 L (269 in³) |
| Emissions tier | U.S. EPA Tier 3 / EU Stage IIIA |
| Generation note | BG555E is the bare C4.4-powered tractor sold without a screed; AP555E is the same tractor factory-paired with a screed (AS2252C/AS3251C/AS4251C/AS4252C). Each carries its own distinct serial-prefix range in Cat parts records. A later Tier 4 Final generation marketed as bare 'AP555'/'AP555F' rates closer to 110 kW (148 hp) — that is a different, newer engine calibration and should not be applied to the E-series BG555E/AP555E. |
Weights
| Operating weight, tractor only (BG555E base unit) | 12 590 kg (27,760 lb) |
| Operating weight, tractor with canopy | 12 945 kg (28,539 lb) |
| Operating weight, complete paver with screed installed (AS2252C) | 16 005 kg (35,290 lb) — configuration becomes AP555E once a screed is fitted |
| Operating weight, complete paver with screed installed (AS3251C) | 16 240 kg (35,810 lb) |
| Operating weight, complete paver with screed installed (AS4251C, w/canopy) | 17 710 kg (39,044 lb) |
| Operating weight, complete paver with screed installed (AS4252C, w/canopy) | 16 745 kg (36,916 lb) |
| Ground pressure | Not published for the Mobil-Trac undercarriage |
Dimensions
| Tractor length with push roller (transport length, bare unit) | 4.38 m (14' 4") |
| Track gauge width (outside to outside) | 2.22 m (8' 3") |
| Transport width without screed end gates, hopper raised | 2.50 m (8' 2") |
| Transport width with screed end gates, hopper raised | 2.72 m (8' 11") — screed-dependent, applies once a screed is fitted |
| Tractor operating width, hopper lowered | 3.31 m (10' 10") |
| Operating height | 3.84 m (12' 7") |
| Transport height, fumes stack and seat lowered | 2.82 m (9' 3") |
| Truck entry height (apron) | 576 mm (23") |
| Truck entry width | 3.20 m (10' 6") |
| Hopper length | 1.96 m (6' 5") |
| Deck height | 1.78 m (5' 10") |
| Ground clearance | Not published for this model |
Performance
| Travel speed (Mobil-Trac undercarriage) | 0 - 11 km/h (0 - 7 mph) |
| Paving speed | 61 m/min (200 fpm) |
| Paving speed with tamper bar screed | 25 m/min (82 fpm) |
| Maximum throughput capacity | 1087 tonnes/h (1,198 tons/h) |
| Maximum paving depth | 305 mm (12") |
| Hopper capacity (incl. tunnels) | 6.2 m³ (219 ft³) |
| Paving width range (varies by screed fitted) | 1.83 - 8.00 m (6' - 26' 4") overall span across AS2252C, AS3251C, AS4251C and AS4252C screed options; each screed has its own standard and bolt-on-extension maximum — consult screed-specific chart |
| Gradeability | Not applicable / not published for this self-propelled paving-train machine class |
Service capacities (summary)
| Fuel tank | 189 L (50 gal) |
| Hydraulic system | Not documented in available factory literature — verify with dealer |
| Engine oil | Not documented in available factory literature — verify with dealer |
| Cooling system | Not documented in available factory literature — verify with dealer |
| On-board generator (screed heat / auxiliary power) | 25 kW at 60 Hz, engine speed 1275 rpm or higher |
| Electrical system | 24V, 75A alternator |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
BG555E fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat C4.4 ACERT | About 11 L (11.6 US qt / 2.9 US gal), per the C4.4 engine's own published refill spec; this base crankcase figure is common to the engine platform and is not expected to change across the E-series or later Tier 4 Final reissue of this paver. | Cat DEO or Cat DEO-ULS multigrade diesel engine oil, SAE 15W-40 for typical/warm ambient use, SAE 10W-30 for moderate/cooler climates. For cold-start regions use Cat DEO SYN (SAE 5W-40) or Cat Arctic DEO SYN (SAE 0W-30). Select viscosity by the coldest expected start-up temperature, not just average ambient. |
| Cooling system | Not documented in factory literature reviewed for the Tier 3 BG555E/AP555E specifically - verify against the dataplate or dealer. A later Tier 4 Final bare 'AP555'/AP555F reissue (different cooling package sized for exhaust aftertreatment) lists a total system capacity of 24 L (6.3 US gal); do not apply that figure to the E-series machine without confirming the generation. | Cat ELC (Extended Life Coolant), factory premixed 50/50 with distilled water. Rated for 6 years / 12,000 service hours before Cat ELC Extender is required at the half-life point. Use ethylene-glycol-based ELC (not propylene) unless the machine was specifically filled with a propylene-glycol variant; keep glycol concentration at 50-60% for freeze/boil protection, never below 40%. |
| Fuel tank | 189 L (50 US gal) for the BG555E/AP555E, Tier 3/Stage IIIA. A later Tier 4 Final bare 'AP555'/AP555F reissue lists 200 L (53 US gal) plus a separate DEF tank - that DEF tank alone is the tell that those figures belong to the newer generation, not this one. | Ultra-low-sulfur diesel (ULSD) meeting Cat's diesel fuel specification. No DEF/exhaust fluid used on this Tier 3 engine generation. |
| Hydraulic system / tank | Not confirmed specifically for the BG555E/AP555E in factory literature reviewed. Secondary sources for the current-generation bare AP555 (same chassis family, later Tier 4 Final reissue) list a 121 L (32 US gal) hydraulic tank; treat as approximate only and verify with a dealer or the dataplate before relying on it for this E-series machine. | Cat HYDO Advanced 10 (SAE 10W) is preferred for most hydraulic and hydrostatic-drive systems between -20 degC and 40 degC (-4 degF to 104 degF). Cat HYDO is the standard-formulation alternative. Outside that ambient band, Cat DEO/DEO-ULS, Cat TDTO, or Cat Arctic TDTO may be used per the viscosity-for-ambient-temperature guidance in the machine's lubricant chart. |
| Track drive / powertrain (Mobil-Trac undercarriage) and auger/conveyor gearboxes | Not separately published as a refill-capacity line item in the factory literature reviewed for this paver; treat as spec-only guidance rather than a missing data point. | Cat TDTO (Transmission/Drive Train Oil) for drive and gearbox compartments. Cat Arctic TDTO (synthetic blend, SAE 0W-20) for cold-climate operation, or Cat TDTO-TMS as a multi-season synthetic-blend alternative. |
| Grease (spec only) | Not applicable - lubricated by scheduled grease-point application per the machine's lubrication chart, no reservoir capacity. | Cat Multipurpose Grease (NLGI 2) for general chassis, pivot, and linkage points. Cat Advanced 3Moly or Cat Ultra 5Moly grease for heavily loaded pins and bushings. Cat Desert Gold Grease for sustained high ambient heat; Cat Arctic Platinum Grease for extreme cold climates. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar BG555E maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
Servicing the BG555E beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S sampling on engine oil, hydraulic oil and coolant at every scheduled interval to catch C4.4 ACERT turbocharger wear, injector drift or Mobil-Trac drive-motor contamination before failure. Track hydraulic oil cleanliness closely - the propel, auger, conveyor and screed circuits share one tank, so a single contaminated component can spread wear across the whole machine. Trend coolant sample results against the ACERT's tighter cooling tolerances, and log fuel filter differential pressure to catch injector-damaging water or sediment early.
Corrective & Common Repairs
Typical BG555E repairs center on Mobil-Trac rubber-track wear (segment cracking, drive-sprocket tooth wear, track tension loss), screed-heater burner faults (clogged nozzles, failed igniters, thermostat drift - not electric-element faults), and auger/conveyor drive-chain stretch from abrasive mix contact. Hydraulic hose and cylinder seal leaks around the screed extension and leveling cylinders are common after years of thermal cycling near the heated screed. C4.4 ACERT boost-leak diagnosis and fuel-system cleaning round out the frequent corrective work on this Tier 3 platform.
Overhaul & Rebuild Points
Plan undercarriage rebuilds around Mobil-Trac roller, idler and drive-sprocket wear limits, typically the first major overhaul point on a heavily used BG555E. Engine overhaul at the C4.4 ACERT's top end (valve train, turbocharger, injectors) follows standard Tier 3 wear curves once oil-sample trends show rising metal content. Screed rebuild work focuses on tamper shaft bushings, vibrator bearings and extension slide wear strips, while the propel and material-handling hydraulic pumps and motors warrant flow testing before committing to a full hydraulic system rebuild.
Seasonal & Environment Servicing
Before cold-weather paving, verify screed burner ignition and fuel supply, since a fuel-fired heater (not an electric element) brings the SE47 screed to temperature on this series, and confirm coolant is rated for the expected low. In hot, dusty paving seasons, service the C4.4 ACERT's air intake and radiator fins more often, and clear accumulated asphalt fines from Mobil-Trac track components and rollers to prevent premature wear. Store the machine with screed heaters purged and the hydraulic tank topped off to limit condensation.
BG555E common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 299-8229 | Filter-Fuel | Fuel system service | Check fitment → |
| 311-1110 | Filter As-Fuel | Fuel system service | Check fitment → |
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 343-7104 | Filter As-Fuel | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
BG555E fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 0100 FMI 03/04 | Engine Oil Pressure Sensor circuit reading out of normal range (voltage above or below normal). | Damaged sensor, corroded or loose connector, or chafed wiring between the sensor and the engine ECM. | Inspect the oil pressure sensor connector and harness for damage or corrosion before replacing the sensor; confirm actual oil pressure with a mechanical gauge. |
| CID 0110 FMI 03/04 | Engine Coolant Temperature Sensor circuit reading out of normal range. | Open or shorted sensor circuit, failed sensor, or connector corrosion. | Check connector pins and harness continuity, then verify the sensor reading against a known-good coolant temperature. |
| CID 0102 FMI 03/04 | Boost (intake manifold) Pressure Sensor circuit reading out of normal range. | Sensor failure, a pinched or disconnected sense line, or a wiring fault. | Inspect the sensor and its air line for damage, check the wiring, then verify sensor output against engine speed and load. |
| CID 0094 FMI 03/04 | Fuel Delivery Pressure Sensor circuit reading out of normal range. | Failed sensor, a contaminated connector, or damaged harness on the low-pressure fuel circuit. | Inspect the fuel pressure sensor wiring and connector, check for a restricted fuel supply such as a plugged filter, then test sensor output. |
| CID 0091 FMI 08 | Throttle/engine speed control (accelerator) position sensor signal abnormal. | Erratic or out-of-range signal from the position sensor, often a worn sensor or a loose linkage or connector. | Check the sensor connector and calibration, then verify the signal with Cat Electronic Technician before replacing the sensor. |
| CID 0190 FMI 02/08 | Engine Speed/Timing Sensor signal erratic or intermittent. | Sensor air gap out of adjustment, a damaged timing-wheel signal, or a wiring/connector fault. | Check sensor mounting and air gap, inspect the wiring for chafing, then confirm signal quality with Cat Electronic Technician. |
| CID 0168 FMI 02 | Electrical system (battery) voltage abnormal or erratic. | Weak or failing battery, loose ground or charging connections, or a faulty alternator/charging circuit. | Check battery state of charge, clean and tighten ground and charging connections, then test alternator output. |
| CID 0247 FMI 09 | SAE J1939 data link abnormal update rate, indicating a loss of communication between the engine ECM and other machine control modules. | Damaged CAN data-link wiring, a loose connector, or a module that has stopped broadcasting. | Check data-link wiring and connectors for damage, then confirm all control modules are powered and communicating using Cat Electronic Technician. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
BG555E attachments & work tools
Screed family (SE47)
The SE47 V (vibratory) and SE47 VT (vibratory plus tamper bar) screeds are the paired screeds for this 8-ft size class, with an SE47 FM front-mount variant also listed. Standard hydraulic-extending range is 2.4-4.7 m (8'-15'6"); simple bolt-on extensions carry it to a 6.1-6.2 m (20'-20'6") maximum. A few listings pair this chassis with a larger AS4252C screed reaching 7-8 m (23'-26'4"); that belongs to a bigger paver size class and should not be assumed without confirming the exact serial range.
Screed heating and tamper bars
Screed plates and tamper bars are electrically heated for fast warm-up and even mat temperature at the joint. The VT tamper-bar version adds a reciprocating tamper bar for extra pre-compaction on stiffer mixes; heated end gates are an option to keep material flowing evenly at the screed edges.
Screed width extension mounting
Width is added with simple bolt-on extension sections rather than a separate hydraulic quick-coupler; the core screed still hydraulically telescopes through its standard range before the bolt-on pieces are fitted for maximum width. Double-width extenders and foldable end gates are documented options on this paver family.
Material feed system - auger and conveyor
Independent auger and conveyor controls feed material out to the screed. The auger assembly is hydraulically height-adjustable, with roughly 215 mm (8.5") of travel, and the tunnel/auger geometry is shaped to cut voids and segregation under the chain case.
Traction and drive
The BG555E runs Cat's Mobil-Trac rubber-track undercarriage, with oscillating bogies and hydraulic accumulators that keep the belts in ground contact and cushion tow-point loads over irregular base material for steady mat quality.
Grade and slope control
Factory grade-control packages (a basic package and a full Cat Grade Control package) run on sonic position sensors that can reference the ground, a stringline, or a tensioned wire. Sensor mounting on this paver class is also compatible with common third-party paving automation gear (sonic-ski and stringline sensor setups) from other grade-control suppliers, not just factory sensors.
Fume management system
A fume-management arrangement pulls fumes from the auger chamber and conveyor tunnel and routes them out through the exhaust stack, with a front-mounted cooling fan pushing residual fumes away from both the paver and screed operator stations.
Operator stations and guarding
Dual operating stations with tilting consoles and an Advisor Monitoring System (AMS) display are standard on this paver family. Walkways and screed-heater components carry factory guarding, and a position sensor in the steering circuit helps hold a steady travel speed through turns.
Tow point / pull system
The paver pulls material trucks or material transfer vehicles through a tow-point arrangement, with hydraulic accumulators cushioning tow-point movement over surface irregularities so bumps are not transmitted into the mat while pushing.
All BG555E assemblies by section
Every catalogued assembly group for the Caterpillar BG555E. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
270-8357 Air Cleaner Gp
| 27***57 | Air Cleaner Group | 1 |
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
328-5455 Air Cleaner Gp
| 12***09 | Valve-Ball; (Hydraulic Tank Drain) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***45 | Connector As | 2 |
207-8264 Bracket Gp-Mounting
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
| 20***64 | Bracket Group-Mounting | 1 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
323-5667 Exhaust Gp-Flexible
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***72 | Fitting-Fuel | 2 |
| 22***00 | Seal-O-Ring | 3 |
333-4788 Manifold Gp-Inlet
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 4 |
305-2168 Mounting Gp-Exhaust
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***72 | Fitting-Fuel | 1 |
| 22***00 | Seal-O-Ring | 3 |
333-4785 Turbocharger Gp
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 17***00 | Seal; (Fuel) | 2 |
| 21***39 | Filter Base Assembly; (24-Volt) | 1 |
Basic Engine
298-5090 Camshaft Gp
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 21***03 | Washer; (Sealing) | 1 |
298-5111 Cover Gp-Engine
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 13***08 | Cap As; (Engine Oil Filler) | 1 |
| 16***65 | Spring; (Crankcase Breather Hose) | 1 |
298-5097 Cover Gp-Valve Mechanism
| 27***94 | Bolt | 3 |
| 29***97 | Cover Group-Valve Mechanism | 1 |
| 33***36 | Crankshaft Group | 1 |
323-6222 Cover Gp-Valve Mechanism
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 0 |
298-5086 Crankshaft Gp
| 03***63 | Plug | 1 |
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 06***02 | Dowel | 10 |
359-0716 Crankshaft Gp
| 22***01 | Bolt; (M15x1.5x137-mm) | 10 |
| 29***26 | Cylinder Head As | 1 |
| 31***20 | Gasket-Cylinder Head | 1 |
330-1736 Crankshaft Gp
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 27***16 | Plug-Core | 4 |
364-2829 Crankshaft Gp
| 10***97 | Valve-Ball | 1 |
| 14***42 | Connector Group | 2 |
| 14***11 | Plug Group | 1 |
298-5085 Cylinder Block Gp
| 11***59 | Bolt; (M10x1.5x35-mm) | 5 |
| 26***28 | Pulley As-Idler | 1 |
| 26***20 | Pulley | 1 |
330-4789 Cylinder Block Gp
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 28***26 | Pulley | 1 |
| 28***27 | Belt-Serpentine | 1 |
298-4526 Cylinder Head As
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 10 |
| 10***31 | Flywheel As | 1 |
298-5088 Cylinder Head Gp
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
328-5480 Drain Gp-Engine Oil
| 10***57 | Plate | 1 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 14***76 | Housing-Flywheel | 1 |
323-9874 Drive Gp-Fan
| 29***24 | Bracket | 1 |
| 29***26 | Bracket | 1 |
| 32***74 | Drive Group-Fan | 1 |
344-4714 Drive Gp-Fan
| 13***07 | Bracket | 1 |
| 14***81 | Spacer | 1 |
| 18***43 | Stud | 4 |
306-2314 Flywheel Gp
| 12***28 | Spacer; (11x20x10-mm Thk) | 1 |
| 30***08 | Guard As-Belt | 1 |
| 30***25 | Mount As | 1 |
298-5110 Gear Gp-Front
| 17***71 | Bolt; (M8x1.25x20-mm) | 4 |
| 29***10 | Gear Group-Front | 1 |
299-5057 Housing Gp-Flywheel
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 4 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
299-5033 Lifting Gp-Engine
| 12***36 | Ring-Retaining | 2 |
| 22***38 | Bushing | 1 |
| 22***39 | Bolt-Special; (Connecting Rod) | 2 |
333-4789 Mounting Gp-Engine
| 22***22 | Plug-Cup | 1 |
| 33***89 | Mounting Group-Engine | 1 |
304-8763 Mounting Gp-Engine
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 30***63 | Mounting Group-Engine | 1 |
323-4650 Mounting Gp-Engine Flexible
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
| 32***50 | Mounting Group-Engine Flexible | 1 |
299-5082 Mounting Gp-Fan
| 10***41 | Bolt; (M12x1.75x25-mm) | 3 |
| 27***31 | Pulley | 1 |
| 29***82 | Mounting Group-Fan | 1 |
322-8424 Pan Gp-Oil
| 27***00 | Plug-Shaft End | 2 |
| 27***01 | Circlip | 1 |
| 27***06 | Spring-Shaft | 3 |
298-5087 Piston & Rod Gp
| 10***81 | Bracket | 1 |
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
| 14***88 | Elbow Group | 1 |
298-5129 Plug Gp-Cylinder Head
| 14***93 | Elbow Group | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 1 |
| 20***45 | Mount; (Dual Swivel) | 1 |
298-5098 Plug Gp-Engine
| 10***61 | Bolt; (M10x1.50x50-mm) | 5 |
| 22***29 | Pump As-Engine Oil | 1 |
| 29***98 | Plug Group-Engine | 1 |
298-5131 Plug Gp-Engine
| 10***87 | Bolt; (M10x1.5x85-mm) | 1 |
| 12***99 | Bolt; (M10x1.5x40-mm) | 1 |
| 28***44 | Gasket-Water Regulator; (Temperature) | 1 |
298-5101 Pulley Gp-Crankshaft
| 22***44 | Gasket; (Engine Oil Filter Base) | 2 |
| 23***51 | Plate; (Blanking) | 1 |
| 24***60 | Head As | 1 |
360-7346 Pulley Gp-Crankshaft
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 35***14 | Cooler-Oil | 1 |
| 35***15 | Gasket | 1 |
298-5089 Rocker Arm Gp
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 00***64 | End; (Hose) | 1 |
| 00***70 | Tee-Pipe | 1 |
298-4533 Rocker Arm Gp
| 11***29 | Bolt; (M8x1.25x75-mm) | 7 |
| 22***38 | Seal-O-Ring | 1 |
| 22***19 | Gasket | 1 |
Braking System
276-5455 Accumulator Gp-Brake -Charged
| 09***59 | Pin-Cotter | 4 |
| 09***19 | Ring-Retaining | 8 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
193-8539 Pump & Valve Gp-Brake -Manual Release
| 10***06 | Plate As | 3 |
| 15***86 | Plate As | 2 |
| 17***08 | Plate As | 2 |
229-9476 Pump Gp-Hand -Manual Brake Release
| 15***86 | Plate As | 1 |
| 17***08 | Plate As | 3 |
| 22***76 | Pump Group-Hand; -Manual Brake Release | 1 |
Controls
276-4579 Adjuster Gp-Height
| 27***79 | Adjuster Group-Height | 1 |
| 27***83 | Film-Instruction; (Mat Thickness, Ccw To Increase) | 2 |
| 28***24 | Shaft As | 2 |
320-3021 Adjuster Gp-Height -Lh
| 10***39 | Key-Square | 1 |
| 11***50 | Sprocket; (12-Teeth) | 1 |
| 18***45 | Boss; (12.7x25.4x15.7-mm Thk) | 2 |
350-6011 Adjuster Gp-Height
| 10***64 | Bearing-Thrust | 2 |
| 11***49 | Worm | 1 |
| 19***44 | Cap | 1 |
350-6007 Adjuster Gp-Height
| 10***41 | Locknut-Bearing; (M30x1.5-Thd) | 4 |
| 17***35 | Ring-Retaining | 2 |
| 24***10 | Stopper-Rubber | 1 |
102-2703 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 1 |
| 27***83 | Film-Instruction; (Mat Thickness, Ccw To Increase) | 2 |
| 28***94 | Shaft As | 2 |
253-4752 Adjuster Gp-Height
| 25***52 | Adjuster Group-Height | 1 |
| 27***84 | Film-Instruction; (Mat Thickness, Cw To Increase) | 2 |
| 28***26 | Shaft As | 2 |
320-3019 Adjuster Gp-Height -Rh
| 10***01 | .. Roller, Bearing | 2 |
| 10***38 | Pointer | 1 |
| 10***39 | Key-Square | 1 |
242-2785 Adjuster Gp-Manual -Gate
| 10***46 | Gear-Worm | 1 |
| 10***49 | Guide-Bushing | 1 |
| 10***64 | Bearing-Thrust | 2 |
350-6009 Adjuster Gp-Manual
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
250-3368 Adjuster Gp-Manual
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
197-9844 Chain Gp-Screed
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
277-9935 Control Gp-Thickness -Rh Thread
| 08***34 | Screw-Button Head | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
287-0326 Control Gp-Thickness -Lh Thread
| 08***34 | Screw-Button Head | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
287-0327 Control Gp-Thickness -Rh Thread
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
| 27***74 | Box; (Lh) | 1 |
253-4739 Control Gp-Thickness -Counterclockwise Rotation
| 06***93 | Lockwasher-Bearing | 2 |
| 10***99 | Jack Group-Sloper | 2 |
| 10***00 | . Axle, Rod End | 2 |
165-4720 Control Gp-Thickness -Lh Thread
| 16***20 | Control Group-Thickness; -Lh Thread | 1 |
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
277-9934 Control Gp-Thickness -Lh Thread
| 27***34 | Control Group-Thickness; -Lh Thread | 1 |
165-4721 Control Gp-Thickness -Rh Thread
| 16***21 | Control Group-Thickness; -Rh Thread | 1 |
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
253-4738 Control Gp-Thickness -Lh Thread
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 25***38 | Control Group-Thickness; -Lh Thread | 1 |
276-4590 Crown Gp-Power
| 08***34 | Screw-Button Head | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 5 |
351-0186 Crown Gp-Power
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 1 |
290-1628 Crown Gp-Power
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
| 27***74 | Box; (Lh) | 1 |
299-7235 Crown Gp-Power
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 1 |
196-2503 Jack Gp-Height Adjuster
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 21 |
102-2699 Jack Gp-Sloper
| 10***99 | Jack Group-Sloper | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
277-2006 Motor Gp-Power Adjuster
| 10***51 | Bolt; (M8x1.25x130-mm) | 1 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 1 |
| 14***83 | Bolt; (M10x1.5x45-mm)(Starter Motor) | 2 |
277-2004 Motor Gp-Power Adjuster
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 12 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 13***00 | Clip; (Tab) | 6 |
277-2005 Motor Gp-Power Adjuster
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 27***05 | Motor Group-Power Adjuster | 1 |
197-9849 Shaft Gp-Drive -Rear-Actuated
| 10***03 | Plate-Cover | 8 |
| 10***04 | Plate As | 1 |
| 10***05 | Plate | 1 |
282-7961 Shaft Gp-Drive -Non-Actuated
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
| 27***74 | Box; (Lh) | 1 |
334-2654 Shaft Gp-Drive -Non-Actuated
| 29***80 | Terminal | 1 |
| 30***01 | Terminal | 10 |
| 30***91 | Terminal | 1 |
197-9850 Shaft Gp-Drive -Front-Non-Actuated
| 19***50 | Shaft Group-Drive; -Front-Non-Actuated | 1 |
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
276-4573 Sloper Gp-Power
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
276-5635 Universal Joint Gp
| 27***35 | Universal Joint Group | 1 |
| 27***01 | Connection | 2 |
| 27***02 | Seal-O-Ring | 2 |
Cooling System
299-5078 Connection Gp-Water
| 29***78 | Connection Group-Water | 1 |
| 6I***63 | Nut; (M10x1.15-Thd) | 3 |
| 6I***12 | Stud | 3 |
353-7717 Cooler Gp-Engine Oil
| 26***48 | Pedal Group-Governor; -Electronic | 2 |
| 27***36 | Spacer | 2 |
| 35***17 | Cooler Group-Engine Oil | 1 |
333-4784 Cooler Gp-Engine Oil
| 03***47 | Ferrule | 3 |
| 03***91 | Nut | 2 |
| 03***14 | Nut; (7/16-In) | 1 |
298-5105 Pump Gp-Water
| 20***53 | Plate | 1 |
| 29***05 | Pump Group-Water | 1 |
| 6V***98 | Bolt; (M5x0.8x16-mm) | 5 |
323-6980 Radiator & Hyd Oil Cooler Gp
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 32***80 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
Electrical And Starting System
3e-6328 Alarm Gp
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 2 |
306-2320 Alternator Gp-Charging
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 30***20 | Manifold, Oil, Alternator Group-Charging; -24-Volt | 1 |
306-8856 Alternator Gp-Charging
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 2U***22 | Bulb (Indicator) 24v 21w Scc | 1 |
| 30***56 | Alternator Group-Charging | 1 |
327-5326 Battery & Wiring Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
| 19***15 | Tube-Flash; (8 Prong Connection)(Warning Beacon) | 1 |
352-0657 Box Gp-Control -Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
328-9946 Box Gp-Control
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 2 |
360-5623 Box Gp-Control
| 03***14 | Screw; (10-32x1-In) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
352-0659 Box Gp-Control -Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
288-1013 Box Gp-Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
360-5622 Box Gp-Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 10***58 | Flasher As; (24-Volt) | 1 |
360-5620 Box Gp-Control
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
352-0658 Box Gp-Control -Lh
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 35***58 | Box Group-Control; -Lh | 1 |
| 5C***64 | Lamp Group-Signal; (Turn, Rh)(Turn Signal) | 1 |
289-5816 Box Gp-Junction
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
353-0442 Box Gp-Relay
| 25***48 | Gearbox | 1 |
| 29***39 | Motor-Electric | 1 |
| 35***42 | Box Group-Relay | 1 |
304-6436 Control Gp-Engine Electronic
| 28***75 | Collar | 4 |
| 28***79 | Washer; (32.5x63.5x7.1-mm Thk) | 2 |
| 28***81 | Handle | 2 |
321-2415 Electrical Ar
| 32***15 | Electrical Ar | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 10***49 | Plate | 2 |
| 13***21 | Handle | 4 |
| 14***10 | Collar | 2 |
351-5775 Electronics Gp-Implement
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 35***75 | Electronics Group-Implement | 1 |
351-8709 Electronics Gp-Machine
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 35***09 | Electronics Group-Machine | 1 |
328-7027 Electronics Gp-Machine -Operator Control
| 12***50 | Receptacle As | 1 |
| 12***51 | Bushing | 1 |
| 12***52 | Clamp As-Cable | 1 |
328-7026 Electronics Gp-Machine
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 32***26 | Electronics Group-Machine | 1 |
328-7028 Electronics Gp-Monitor
| 11***24 | Clamp | 4 |
| 16***41 | Support-Sensor | 2 |
| 19***38 | Sensor Group-Sonic; (Position) | 4 |
321-2465 Generator & Mounting Gp -Belt Drive
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 32***65 | Generator & Mounting Group; -Belt Drive | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
299-5075 Glow Plug Gp
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***24 | Clamp | 2 |
| 16***41 | Support-Sensor | 2 |
286-3624 Heater Ar-Screed -Electric
| 11***24 | Clamp | 2 |
| 19***38 | Sensor Group-Sonic; (Position) | 2 |
| 1G***11 | Shaft-Governor Control | 2 |
324-6845 Installation Gp-Communication -Product Link
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
234-4323 Lamp Gp-Flood
| 18***55 | Fitting-Pipe | 1 |
| 1F***13 | Locknut; (3/4-In) | 2 |
| 23***23 | Lamp Group-Flood; -Vertical Mount | 1 |
283-8145 Lamp Gp-Flood -Hid
| 1F***13 | Locknut; (3/4-In) | 2 |
| 23***80 | Fitting; (Pipe) | 1 |
| 28***45 | Lamp Group-Flood; -24-Volt, 35-Watt, Hid-Cab Guard | 1 |
238-2797 Lamp Gp-Head & Signal -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
238-2798 Lamp Gp-Head & Signal -Lh
| 22***50 | Starting Motor Group-Electric | 1 |
| 23***98 | Lamp Group-Head & Signal; -Lh | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
344-3455 Lamp Gp-Head & Signal -Rh
| 31***59 | Cover As | 1 |
| 34***55 | Lamp Group-Head & Signal; -Rh | 1 |
344-3456 Lamp Gp-Head & Signal -Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 34***56 | Lamp Group-Head & Signal; -Lh | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
259-0134 Lamp Gp-Registration Plate
| 03***63 | Plug | 1 |
| 25***34 | Lamp Group-Registration Plate; -European Market | 1 |
291-3698 Lamp Gp-Signal -Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 29***98 | Lamp Group-Signal; -Rh | 1 |
284-3757 Lamp Gp-Warning Beacon -Amber, Strobe
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 21***39 | Strap-Cable | 3 |
| 23***39 | Clip | 1 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 3 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 13***00 | Clip; (Tab) | 2 |
338-1132 Lamp Gp-Warning Beacon -Amber, Strobe
| 10***05 | Plate | 4 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
235-3937 Lamp Gp-Warning Beacon -Amber, Rotating
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
288-6925 Lighting Gp-Flood
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***18 | Clip | 31 |
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
290-6022 Lighting Gp-Flood -Hid
| 10***05 | Plate | 10 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
354-1435 Lighting Gp-Roading
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
293-5354 Lighting Gp-Roading -Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
354-1436 Lighting Gp-Roading
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
321-2440 Lighting Gp-Roading
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
198-8284 Lighting Gp-Warning Beacon
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
276-1832 Lighting Gp-Warning Beacon
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
299-7245 Motor Gp-Electric
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
258-6918 Mounting Gp-Sensor -Sonic Sensor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 13***00 | Clip; (Tab) | 1 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 13***00 | Clip; (Tab) | 1 |
330-6085 Sensor & Mounting Gp -Contact
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 1 |
| 2L***69 | Terminal-Ring; (2-Ga To 10-Ga, 3/8-In Screw) | 1 |
| 33***85 | Sensor & Mounting Group; -Contact | 1 |
198-8279 Sensor Gp-Auger
| 19***79 | Sensor Group-Auger | 1 |
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 1 |
| 2L***69 | Terminal-Ring; (2-Ga To 10-Ga, 3/8-In Screw) | 1 |
301-0071 Sensor Gp-Position -2 Sensor
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***88 | Gasket-Connector | 1 |
| 15***98 | Screw-Button Head; (M3x0.5x1-mm) | 4 |
294-0112 Sensor Gp-Position
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***88 | Gasket-Connector | 1 |
| 15***98 | Screw-Button Head; (M3x0.5x1-mm) | 4 |
195-8090 Sensor Gp-Position
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
278-3428 Sensor Gp-Position
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 24 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
160-2443 Sensor Gp-Position
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
| 2L***69 | Terminal-Ring; (2-Ga To 10-Ga, 3/8-In Screw) | 1 |
| 33***25 | Wiring Group-Power Receptacle; -110-Vac | 1 |
284-8876 Sensor Gp-Position
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 3 |
219-2385 Sensor Gp-Position
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
266-1467 Sensor Gp-Position -Rotary
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 8 |
| 24***12 | Switch As-Toggle; (Right Extender Width Sw) | 3 |
322-9152 Sensor Gp-Temperature
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 3 |
| 12***66 | Socket-Connector; (14-Ga To 18-Ga) | 24 |
322-9153 Sensor Gp-Temperature
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 3 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
145-7028 Sensor Gp-Temperature
| 06***44 | Grommet | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
334-7882 Sensor Gp-Temperature
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
296-1288 Electronics Gp-Implement
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 11***07 | Knob | 2 |
| 12***44 | Paddle As | 2 |
362-3935 Starting Motor Gp-Electric
| 30***60 | Wiring Group-Screed; -Extension, Rh | 1 |
| 30***61 | Wiring Group-Screed; -Extension, Lh | 1 |
| 36***35 | Starting Motor Group-Electric | 1 |
299-5067 Starting Motor Gp-Electric
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
237-7602 Switch Gp-Disconnect -Battery
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 10 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
172-8660 Switch Gp-Liquid Level -Hydraulic Tank
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 2 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 1 |
333-4791 Switch Gp-Pressure
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 2 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
1v-6652 Switch Gp-Toggle
| 1V***52 | Switch Group-Toggle | 1 |
| 31***52 | Wiring Group-Screed Heater; -250-mm Extension, Rh | 1 |
| 31***53 | Wiring Group-Screed Heater; -250-mm Extension, Lh | 1 |
165-5970 Switch Gp-Toggle
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 4 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
299-7223 Wiring Gp-Crown
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 4 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
327-5330 Wiring Gp-Electronic Control
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
| 17***53 | Kit-Receptacle; (4-Pin) | 2 |
298-5130 Wiring Gp-Engine
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
| 17***53 | Kit-Receptacle; (4-Pin) | 2 |
| 17***56 | Kit-Connecting Plug; (4-Pin) | 2 |
286-3633 Wiring Gp-Heater
| 24***59 | Adapter | 1 |
| 24***15 | Seal-O-Ring | 1 |
| 28***33 | Wiring Group-Heater | 1 |
293-6541 Wiring Gp-Heater
| 24***15 | Seal-O-Ring | 1 |
| 25***63 | Adapter | 1 |
| 29***41 | Wiring Group-Heater | 1 |
276-4607 Wiring Gp-Heater
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 3 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
304-9107 Wiring Gp-Heater -Rh
| 03***06 | Seal (Use As Required) | 1 |
| 16***80 | Plug As. | 1 |
| 20***72 | Plug As | 1 |
304-9102 Wiring Gp-Heater -Rh
| 12***28 | Spacer; (11x20x10-mm Thk) | 2 |
| 20***04 | Plate | 2 |
| 23***62 | Plate | 2 |
304-9103 Wiring Gp-Heater -Lh
| 14***11 | Plug Group | 1 |
| 29***10 | Plate-Cover | 1 |
| 30***03 | Wiring Group-Heater; -Lh | 1 |
304-9108 Wiring Gp-Heater -Lh
| 14***68 | Elbow Group | 4 |
| 17***51 | Pin-Clevis | 2 |
| 19***59 | Cylinder Group-Hydraulic; -Auger, Rh | 1 |
327-5328 Wiring Gp-Machine -Rh
| 10***44 | Elbow | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 20***00 | Elbow As | 2 |
327-5327 Wiring Gp-Machine -Lh
| 14***68 | Elbow Group | 2 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 2 |
| 27***60 | Cylinder Group-Hydraulic; -Screed Hoist | 2 |
327-5329 Wiring Gp-Machine -Rear
| 14***74 | Elbow As | 2 |
| 16***88 | Elbow; (90-Deg) | 1 |
| 17***51 | Pin-Clevis | 4 |
333-8385 Wiring Gp-Panel -240-Vac
| 03***39 | Ring-Back-Up | 1 |
| 12***75 | Ring-Wear | 2 |
| 13***19 | Kit-Seal; (Extender Cylinder) | 1 |
333-8384 Wiring Gp-Panel -120-Vac
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 14***18 | Connector As | 2 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 2 |
321-2446 Wiring Gp-Power Receptacle -220-Vac
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 23***20 | Kit-Plug; (Auger Cylinder) | 1 |
| 23***21 | Kit-Seal; (Auger Cylinder, Rh) | 1 |
321-2449 Wiring Gp-Power Receptacle -Nacd
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 14***61 | Plug | 2 |
| 14***62 | Seal-Washer | 2 |
321-2447 Wiring Gp-Power Receptacle -120-Vac
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 23***18 | Kit-Seal; (Auger Cylinder, Lh) | 1 |
| 23***19 | Wire-Lock | 1 |
336-0225 Wiring Gp-Power Receptacle -110-Vac
| 25***60 | Kit-Seal; (Hydraulic Cylinder) | 1 |
| 33***25 | Wiring Group-Power Receptacle; -110-Vac | 1 |
| 5W***19 | Fitting-Grease | 2 |
327-5331 Wiring Gp-Power Train
| 27***79 | Kit-Seal; (Hydraulic Cylinder) | 1 |
| 2K***71 | Locknut; (1-14-Thd) | 1 |
| 32***31 | Wiring Group-Power Train | 1 |
289-5815 Wiring Gp-Screed
| 28***15 | Wiring Group-Screed | 1 |
293-6625 Wiring Gp-Screed
| 14***75 | Elbow Group | 1 |
| 14***57 | Union Bulkhead; (Orfs) | 3 |
| 14***52 | Union As | 1 |
351-2797 Wiring Gp-Screed -Extension
| 28***51 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 32***50 | Pump & Mtg Group-Hydraulic Fan | 1 |
| 32***52 | Lines Group-Hydraulic Fan | 1 |
306-8868 Wiring Gp-Screed -250-Mm Extension
| 30***68 | Wiring Group-Screed; -250-mm Extension | 1 |
| 32***94 | Valve & Mtg Group-Truck Hitch | 1 |
| 32***95 | Lines Group-Truck Hitch | 1 |
359-1035 Wiring Gp-Screed
| 32***14 | Lines Group-Tamper | 1 |
| 32***15 | Pump & Mtg Group-Auxiliary | 1 |
| 35***35 | Wiring Group-Screed | 1 |
306-6660 Wiring Gp-Screed -Extension, Rh
| 16***50 | Sleeve-Abrasion; (100-In Each) | 0 |
| 25***63 | Fitting & Mtg Group-Hydraulic; -Front, Lh Frame | 1 |
| 25***64 | Fitting & Mtg Group-Hydraulic; -Front, Rh Frame | 1 |
306-6661 Wiring Gp-Screed -Extension, Lh
| 30***61 | Wiring Group-Screed; -Extension, Lh | 1 |
| 32***98 | Hydraulic Ar-Auxiliary | 1 |
| 32***76 | Hydraulic Ar-Propel | 1 |
297-2488 Wiring Gp-Screed
| 14***75 | Elbow Group | 2 |
| 14***57 | Union Bulkhead; (Orfs) | 2 |
| 14***52 | Union As | 1 |
359-1042 Wiring Gp-Screed
| 32***89 | Valve & Mtg Group-Vibratory | 1 |
| 32***90 | Lines Group-Vibratory | 1 |
| 35***42 | Wiring Group-Screed | 1 |
276-4552 Wiring Gp-Screed -Extension
| 25***75 | Ring-Retaining | 1 |
| 27***52 | Wiring Group-Screed; -Screed Extension | 1 |
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 1 |
291-3697 Wiring Gp-Screed -Lh
| 14***53 | Hose; (272.2-cm) | 0 |
| 14***12 | Adapter As | 2 |
| 14***52 | Union As | 1 |
351-0903 Wiring Gp-Screed
| 27***24 | Cylinder & Mtg Group-Screed Hoist | 1 |
| 27***26 | Cylinder & Mtg Group-Auger | 1 |
| 32***91 | Pump & Mtg Group-Auxiliary | 1 |
276-4606 Wiring Gp-Screed
| 26***92 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 27***06 | Wiring Group-Screed; -24-Volt | 1 |
| 29***49 | Cylinder Group-Hydraulic; -Hopper | 1 |
293-5341 Wiring Gp-Screed -Rh
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 18***60 | Head | 1 |
304-9104 Wiring Gp-Screed
| 14***75 | Elbow Group | 2 |
| 14***57 | Union Bulkhead; (Orfs) | 2 |
| 14***52 | Union As | 1 |
293-7187 Wiring Gp-Screed Heater -750-Mm Extension, Lh
| 10***05 | Plate | 2 |
| 10***45 | Clamp | 4 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
321-2444 Wiring Gp-Screed Heater
| 10***03 | Plate-Cover | 3 |
| 10***05 | Plate | 2 |
| 14***28 | Connector Assem. | 1 |
321-2437 Wiring Gp-Screed Heater
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***36 | Elbow As. | 2 |
| 16***32 | Pin | 2 |
319-7152 Wiring Gp-Screed Heater -250-Mm Extension, Rh
| 10***05 | Plate | 2 |
| 14***75 | Elbow Group | 1 |
| 14***55 | Union As | 2 |
293-7258 Wiring Gp-Screed Heater -750-Mm Extension, Rh
| 10***03 | Plate-Cover | 1 |
| 10***05 | Plate | 4 |
| 14***77 | Elbow As. | 2 |
319-7153 Wiring Gp-Screed Heater -250-Mm Extension, Lh
| 14***68 | Elbow Group | 1 |
| 14***84 | Elbow As | 4 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 3 |
351-0901 Wiring Gp-Screed Heater
| 31***03 | Hose As | 2 |
| 34***20 | Hose As | 2 |
| 35***01 | Wiring Group-Screed Heater | 1 |
306-8869 Wiring Gp-Screed Heater -250-Mm Extension
| 14***27 | Connector Group | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***39 | Connector As. | 1 |
328-9591 Wiring Gp-Screed Heater -750-Mm Extension
| 10***05 | Plate | 1 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 2 |
| 14***27 | Connector Group | 1 |
Electrical System
288-6122 Box Gp-Screed Control -Rh
| 28***22 | Box Group-Screed Control; -Rh | 1 |
| 35***89 | Software Group-Implement | 1 |
| 35***90 | Service Group-Implement | 1 |
288-6124 Box Gp-Screed Control -Electronic
| 28***24 | Box Group-Screed Control; -Electronic | 1 |
| 34***21 | Software Group-Machine | 1 |
| 34***22 | Service Group-Machine | 1 |
352-0667 Box Gp-Screed Control
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 2 |
294-8232 Box Gp-Screed Control -Lh
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 22***74 | Bezel; (Hid) | 1 |
| 27***82 | Lens As; (Hid) | 1 |
289-3575 Box Gp-Screed Control -Rh
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 10***54 | Bolt; (M12x1.75x35-mm) | 3 |
| 12***96 | Seal; (1.084m) | 0 |
289-3576 Box Gp-Screed Control -Lh
| 28***76 | Box Group-Screed Control; -Basic, Left | 1 |
| 29***81 | Glow Plug; (24-Volt) | 4 |
| 29***72 | Bar | 1 |
348-7769 Box Gp-Screed Control
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 2 |
286-5562 Box Gp-Screed Control -Rh
| 28***62 | Box Group-Screed Control; -Rh | 1 |
| 32***65 | Generator & Mounting Group; -Belt Drive | 1 |
| 32***24 | Console Group-Operator | 1 |
288-1014 Box Gp-Screed Control -Lh
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 28***14 | Box Group-Screed Control; -Lh | 1 |
288-6125 Box Gp-Screed Control -Lh
| 28***25 | Box Group-Screed Control; -Lh | 1 |
| 31***96 | Software Group-Machine | 1 |
294-8231 Box Gp-Screed Control -Rh
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***74 | Cover-Connector; (Wire Router) | 1 |
Engine Arrangement
285-3201 Engine Ar-Primary
| 28***01 | Engine Ar-Primary | 2 |
| 32***50 | Mounting Group-Engine Flexible | 1 |
| 32***67 | Exhaust Group-Flexible | 1 |
321-2420 Installation Ar-Engine
| 1B***36 | Key-Woodruff | 1 |
| 27***26 | Rod-Push | 8 |
| 30***30 | Camshaft As | 1 |
Feeder Drag And Auger Conveyors
352-4611 Auger Gp
| 09***85 | Locknut; (M16x2-Thd) | 4 |
| 13***82 | Bolt; (M16x2x100-mm) | 4 |
| 15***49 | Screw-Flat Head; (M10x1.5x25-mm) | 8 |
201-5584 Bearing Gp-Auger
| 20***84 | Bearing Group-Auger | 1 |
| 27***22 | Bushing | 2 |
| 32***50 | Plate Group-Slide | 1 |
116-9509 Bearing Gp-Auger
| 11***09 | Bearing Group-Auger | 1 |
| 27***22 | Bushing | 2 |
| 32***50 | Plate Group-Slide | 1 |
106-9718 Bearing Gp-Auger
| 10***18 | Bearing Group-Auger | 1 |
| 19***12 | Plate | 2 |
| 1D***06 | Nut 13.89 mm (.546 In.) | 4 |
321-2419 Conveyor Ar-Drag & Auger
| 24***16 | Actuator Group | 4 |
| 25***29 | Support As; (Lh) | 1 |
| 25***36 | Support As; (Rh) | 4 |
352-4610 Conveyor Gp-Auger
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***47 | Washer | 2 |
| 24***16 | Actuator Group | 4 |
323-5568 Conveyor Gp-Drag
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 17***11 | Locknut; (M16x2-Thd) | 4 |
322-9721 Door Gp-Access
| 08***07 | Pin | 2 |
| 09***79 | Setscrew-Socket | 4 |
| 09***76 | Nut; (M14x2-Thd) | 2 |
334-7637 Door Gp-Access
| 19***54 | Chain | 1 |
| 27***65 | Bar | 1 |
| 27***66 | Tube As | 1 |
352-4622 Drive Gp-Conveyor
| 31***20 | Handrail As; (Rh) | 1 |
| 33***78 | Handrail As; (Lh) | 1 |
| 33***79 | Handrail As; (Rh) | 1 |
231-2042 Extension Gp-Auger -24-In, Rh
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
| 16***85 | Pin As | 2 |
231-3532 Extension Gp-Auger -6-In
| 14***20 | Connector As | 2 |
| 14***85 | Elbow; (45°) | 8 |
| 14***89 | Elbow As | 6 |
199-4206 Extension Gp-Auger -12-In, Lh
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 26***33 | Pin As | 1 |
198-8287 Extension Gp-Auger -12-In, Rh
| 19***08 | Bar | 2 |
| 19***09 | Pin As | 1 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
231-2043 Extension Gp-Auger -24-In, Lh
| 23***43 | Extension Group-Auger; -24-In, Lh | 1 |
| 24***87 | Connector | 16 |
| 26***34 | Hose As-Grease | 10 |
243-0329 Extension Gp-Auger -18-In
| 24***29 | Extension Group-Auger; -18-In | 1 |
| 25***97 | Bar | 2 |
| 31***09 | Plate | 2 |
215-1870 Footshaft Gp
| 21***70 | Footshaft Group | 1 |
| 31***62 | Plate | 2 |
| 7X***56 | Bolt-Plt; (M16 X 2.0 X 100) | 4 |
322-7244 Guard Gp-Conveyor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 22***38 | Sensor Group-Temperature; (Screed Heat) | 2 |
323-8177 Hydraulic Ar-Conveyor
| 26***54 | Shim; (2-mm Thk) | 4 |
| 29***23 | Nut-Adjustment; (1-1/4-12-Thd) | 44 |
| 29***24 | Stud; (1/2-13x4.52-In) | 44 |
323-8186 Motor & Mtg Gp-Conveyor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 22***38 | Sensor Group-Temperature; (Screed Heat) | 2 |
| 24***90 | Plate | 2 |
323-8185 Pump & Mtg Gp-Conveyor
| 18***31 | Bolt-Special; (1 1/4-12-2athd) | 4 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 21***69 | Stud | 4 |
263-6003 Shaft Gp-Feeder Drive
| 03***57 | Washer; (13x26x6-mm Thk) | 16 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
Frame And Body
286-3634 Arm Gp-Drop
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 1 |
300-9991 Arm Gp-Drop
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 2 |
276-4589 Arm Gp-Drop
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 1 |
| 26***33 | Pin As | 1 |
| 27***45 | Bar | 1 |
351-0178 Arm Gp-Drop
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 22***38 | Sensor Group-Temperature; (Screed Heat) | 4 |
321-2433 Arm Gp-Tow
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 13***89 | Clip; (Ladder) | 6 |
| 25***44 | Spacer; (14.86x19.05x12.5-mm Thk) | 4 |
356-5097 Ballast & Mounting Gp -6-Plate
| 09***22 | Ring-Retaining | 2 |
| 25***79 | Gate As | 1 |
| 31***19 | Guide As; (Lh) | 1 |
316-1658 Ballast & Mounting Gp -2-Plate
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***37 | Bracket; (Rh) | 16 |
| 25***01 | Plate-Main | 1 |
356-5146 Ballast & Mounting Gp -6-Plate
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***75 | Bracket | 16 |
| 25***44 | Spacer; (14.86x19.05x12.5-mm Thk) | 8 |
356-5096 Ballast & Mounting Gp -4-Plate
| 09***22 | Ring-Retaining | 2 |
| 25***79 | Gate As | 1 |
| 31***18 | Guide As; (Rh) | 1 |
356-4739 Ballast & Mounting Gp -4-Plate
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***37 | Bracket; (Rh) | 8 |
| 25***13 | Plate; (Lh Extender) | 1 |
316-1659 Ballast & Mounting Gp -2-Plate
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***37 | Bracket; (Rh) | 8 |
| 25***06 | Plate; (Extender, Rh) | 1 |
315-1101 Brace Gp
| 26***61 | Lock Group-Transport | 1 |
| 31***01 | Brace Group | 1 |
| 32***33 | Arm Group-Tow | 1 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 32***85 | Step As | 1 |
| 7F***88 | Pin | 2 |
350-5664 Brace Gp
| 10***89 | Brace Group | 1 |
| 23***07 | Bracket Group-Support | 1 |
| 35***64 | Brace Group | 1 |
350-6039 Brace Gp
| 23***07 | Bracket Group-Support | 2 |
| 35***64 | Brace Group | 1 |
| 35***39 | Brace Group | 1 |
263-6006 Bracket Gp-Support
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***04 | Housing As-Blower | 1 |
282-8500 Bracket Gp-Support
| 14***93 | Bogie Group | 1 |
| 17***26 | Shaft | 2 |
| 19***38 | Roller Group-Track | 4 |
232-1107 Bracket Gp-Support
| 23***07 | Bracket Group-Support | 1 |
| 32***32 | Insulation-Sound Suppression | 1 |
| 32***33 | Insulation-Sound Suppression | 1 |
295-3079 Carriage Gp-Extender
| 18***27 | Plate | 1 |
| 19***77 | Shim; (6.35-mm Thk) | 2 |
| 19***78 | Shim; (3-mm Thk) | 2 |
321-2430 Conversion Gp-Roading -Italy
| 18***27 | Plate | 1 |
| 19***77 | Shim; (6.35-mm Thk) | 2 |
| 19***78 | Shim; (3-mm Thk) | 2 |
321-2431 Conversion Gp-Roading -Germany
| 10***59 | Bearing-Sleeve | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 1 |
| 17***81 | Cover | 1 |
295-2114 Cover Gp-Access
| 10***59 | Bearing-Sleeve | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 1 |
| 17***81 | Cover | 1 |
272-2384 Cover Gp-Platform
| 05***03 | Washer; (40.46x69.85x7.37-mm Thk) | 1 |
| 10***79 | Cover As | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
350-5927 Cover Gp-Screed
| 35***27 | Cover Group-Screed | 1 |
| 35***26 | Track-Rubber | 2 |
358-6583 Cover Gp-Screed -Rh
| 29***43 | Frame Group-Track Roller; -Lh | 1 |
| 29***44 | Frame Group-Track Roller; -Rh | 1 |
| 29***45 | Drive Group-Final | 1 |
328-9585 Cover Gp-Screed
| 32***92 | Fuel Connector Adapter, Track-Rubber | 2 |
| 32***85 | Cover Group-Screed | 1 |
286-3493 Cover Gp-Screed
| 03***53 | Ring-Retaining | 2 |
| 10***59 | Bearing-Sleeve | 2 |
| 10***18 | Plate | 2 |
276-4582 Deflector Gp
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 27***35 | Clamp | 8 |
| 27***82 | Deflector Group | 1 |
350-5906 Deflector Gp
| 27***88 | Plate & Heater Group-Screed | 1 |
| 27***35 | Universal Joint Group | 2 |
| 29***01 | Conversion Ar-Screed; -Electric Heat | 1 |
250-3366 Deflector Gp
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***66 | Deflector Group | 1 |
| 27***35 | Clamp | 8 |
215-7553 Extension Gp-Main Frame
| 21***53 | Extension Group-Main Frame | 1 |
| 34***65 | Valve & Mtg Group; -Main Frame Extension | 1 |
| 34***50 | Extension Group-Main Frame | 1 |
339-1636 Extension Gp-Main Frame
| 29***33 | Extension Group-Screed; -6.5-M | 1 |
| 32***85 | Cover Group-Screed | 1 |
| 32***92 | Conversion Ar-Screed; -Electric Heat, 750-mm Extension | 1 |
231-1983 Extension Gp-Main Frame -24-In
| 23***83 | Extension Group-Main Frame; -24-In | 1 |
| 27***88 | Plate & Heater Group-Screed | 1 |
| 29***36 | Extension Group-Main Frame | 1 |
339-1628 Extension Gp-Main Frame
| 29***20 | Extension Group-Screed | 1 |
| 29***44 | Conversion Ar-Screed; -Electric Heat, 250-mm Extension | 1 |
| 30***69 | Wiring Group-Screed Heater; -250-mm Extension, Cover | 1 |
231-1982 Extension Gp-Main Frame -12-In
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
| 21***53 | Extension Group-Main Frame | 1 |
349-1450 Extension Gp-Main Frame
| 29***20 | Extension Group-Screed | 1 |
| 29***33 | Extension Group-Screed; -6.5-M | 1 |
| 29***44 | Conversion Ar-Screed; -Electric Heat, 250-mm Extension | 1 |
299-7236 Extension Gp-Main Frame
| 27***35 | Universal Joint Group | 2 |
| 29***01 | Conversion Ar-Screed; -Electric Heat | 1 |
| 29***02 | Screed Ar | 1 |
265-6509 Fitting Gp-Grease
| 24***03 | Extension Ar-Auger | 1 |
| 24***18 | Tube As; (1.8-M) | 1 |
| 26***09 | Fitting Group-Grease | 1 |
346-1707 Flashing Gp -Belting-Hydraulic Fold
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
346-1709 Flashing Gp -Belting-Manual Fold
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
346-1708 Flashing Gp -Plastic-Manual Fold
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
346-1706 Flashing Gp -Plastic-Hydraulic Fold
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
322-4975 Frame Gp-Main
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
353-9489 Frame Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 29***74 | Extension Group-Screed | 1 |
| 35***89 | Frame Group-Screed | 1 |
295-3080 Frame Gp-Screed
| 24***03 | Extension Ar-Auger | 1 |
| 24***18 | Tube As; (1.8-M) | 1 |
| 28***22 | Extension Ar-Screed; -Electric Heat, 5.5-M | 1 |
286-3492 Frame Gp-Screed -Lh
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
276-4604 Frame Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
350-7789 Frame Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 29***73 | Extension Group-Screed | 1 |
| 35***89 | Frame Group-Screed | 1 |
286-3490 Frame Gp-Screed -Lh
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 21***53 | Extension Group-Main Frame | 1 |
286-3491 Frame Gp-Screed -Rh
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
295-2113 Frame Gp-Screed
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
292-8813 Frame Gp-Sliding -Lh
| 09***22 | Ring-Retaining | 2 |
| 09***85 | Locknut; (M16x2-Thd) | 2 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 4 |
292-8814 Frame Gp-Sliding -Rh
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
276-4603 Gate Gp-End
| 09***85 | Locknut; (M16x2-Thd) | 4 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 8 |
| 13***82 | Bolt; (M16x2x100-mm) | 4 |
253-4735 Gate Gp-End
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***31 | Bar-Spacer | 1 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
350-9518 Gate Gp-End
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
311-4480 Gate Gp-End -Folding
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
311-4470 Gate Gp-End
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
273-9969 Guide Gp-Steering
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
327-5709 Handrail Gp
| 09***41 | Ring-Retaining | 1 |
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
| 24***06 | Shaft As | 1 |
301-1468 Hitch Gp-Oscillating
| 09***41 | Ring-Retaining | 1 |
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
| 24***07 | Shaft As | 1 |
345-8116 Hopper Gp
| 19***29 | Bolt-Shoulder; (M8x1.25-Thd) | 2 |
| 33***62 | Rod As | 2 |
| 33***63 | Plate | 2 |
325-9373 Hopper Gp -Hydraulic
| 08***36 | Clip-Internal; (Water Temperature Regulator) | 1 |
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
| 24***09 | Shaft As | 1 |
250-3370 Lines Gp-Grease
| 25***70 | Lines Group-Grease | 1 |
| 32***47 | Support As | 1 |
| 32***52 | Pad | 2 |
350-5975 Lines Gp-Grease
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 10***64 | Shaft As | 2 |
| 16***17 | Roller | 2 |
270-2104 Lines Gp-Grease
| 19***08 | Bar | 2 |
| 19***09 | Pin As | 1 |
| 27***04 | Lines Group-Grease | 1 |
263-5961 Lock Gp-Transport
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 24***28 | Seal | 1 |
| 24***41 | Kit-Bearing; (Drive Shaft) | 2 |
316-1660 Mounting Gp-Ballast
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
270-8888 Plate & Heater Gp-Screed
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
276-4605 Plate & Heater Gp-Screed -Electric Heat
| 09***76 | Nut; (M14x2-Thd) | 8 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 22 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
295-2111 Plate & Heater Gp-Screed
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 27***35 | Clamp | 22 |
| 28***11 | Blade; (Main, Lh) | 1 |
359-1034 Plate & Heater Gp-Screed
| 26***41 | Wall As | 1 |
| 33***85 | Tube As | 1 |
| 35***34 | Plate & Heater Group-Screed | 1 |
328-9579 Plate & Heater Gp-Screed -750-Mm Extension
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
351-0075 Plate & Heater Gp-Screed -Electric Heat
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
| 24***88 | Seal; (100x112x12-mm) | 1 |
| 24***89 | Seal; (140x155x16-mm) | 1 |
359-1041 Plate & Heater Gp-Screed -Electric Heat
| 26***44 | Wall As | 1 |
| 33***85 | Tube As | 1 |
| 35***41 | Plate & Heater Group-Screed; -Electric Heat | 1 |
295-3084 Plate & Heater Gp-Screed -Electric Heat
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
273-1160 Plate Gp
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 19***78 | Pad | 2 |
| 27***60 | Plate Group | 1 |
311-6561 Plate Gp-Screed -Electric Heat, Main
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
245-9077 Plate Gp-Screed -Electric Heat, 12-In
| 10***63 | Clamp | 1 |
| 11***98 | Plug | 1 |
| 11***08 | Bushing | 2 |
310-9817 Plate Gp-Screed -Lh
| 27***73 | Clip | 2 |
| 31***17 | Plate Group-Screed; -Lh | 1 |
| 31***97 | Sensor-Angle; (As200c)(Grade Control) | 1 |
310-9816 Plate Gp-Screed -Rh
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
308-3130 Plate Gp-Screed -Electric Heat, Main
| 20***30 | Control Group-Grade & Slope | 1 |
| 23***08 | Link; (6-Pin) | 2 |
| 25***30 | Mount As | 2 |
308-3132 Plate Gp-Screed -Electric Heat, Extender, Lh
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
295-2942 Plate Gp-Screed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
308-3131 Plate Gp-Screed -Electric Heat, Extender, Rh
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***33 | Wire; (30-cm) | 0 |
287-0269 Plate Gp-Screed
| 11***10 | Screw-Pan Head | 8 |
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
245-9078 Plate Gp-Screed -Electric Heat, 28-In
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***08 | Bushing | 2 |
302-3944 Step Gp
| 10***49 | Plate | 2 |
| 13***21 | Handle | 4 |
| 14***10 | Collar | 2 |
300-3564 Step Gp
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
321-2422 Structural Ar
| 09***49 | Bolt; (M8x1.25x40-mm) | 4 |
| 13***39 | Screw-Flat Head; (M8x1.25x30-mm) | 4 |
| 27***73 | Clip | 2 |
360-9843 Support Gp-Frame
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
360-9844 Support Gp-Frame
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
350-6038 Support Gp-Frame
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
231-1956 Support Gp-Frame
| 23***56 | Support Group-Frame | 1 |
| 25***29 | Mount As | 2 |
| 25***30 | Mount As | 2 |
322-9331 Suppression Gp-Sound
| 08***09 | Bracket | 7 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
321-2436 Ventilation Gp-Paver
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***04 | Tube; (1.1-M) | 1 |
329-8222 Walkway Gp
| 10***04 | Tube; (1.1-M) | 1 |
| 10***34 | Tube As | 1 |
| 10***49 | Collar | 2 |
Fuel System
276-0079 Control Gp-Decelerator
| 16***00 | Connector As | 1 |
| 27***79 | Control Group-Decelerator | 1 |
| 2S***40 | Clamp-Hose To Nipple | 1 |
201-7654 Cover Gp-Fuel Tank
| 10***47 | Gear-Worm | 1 |
| 10***50 | Guide-Bushing | 1 |
| 11***81 | Worm | 1 |
298-5123 Filter Gp-Primary Fuel
| 10***24 | Tube As; (Vertical) | 4 |
| 10***39 | Key-Square | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
174-9570 Filter Gp-Water Sep & Fuel
| 10***03 | Adjuster Group-Height; -Manual | 2 |
| 10***04 | Bolt-Shoulder | 2 |
| 10***24 | Tube As; (Vertical) | 4 |
320-0680 Injector Gp-Fuel
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 1 |
| 11***95 | Pin-Spring | 1 |
| 17***11 | Locknut; (M16x2-Thd) | 1 |
324-9680 Lines Gp-Fuel
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 1 |
| 17***11 | Locknut; (M16x2-Thd) | 1 |
| 21***21 | Locknut | 2 |
311-2271 Lines Gp-Fuel Filter
| 24***58 | Tube As | 1 |
| 24***73 | Tube As | 1 |
| 24***77 | Tube As | 1 |
333-4782 Pump Gp-Fuel Injection
| 13***21 | Rod-Threaded; (1-5-Acme Thd, Lh) | 2 |
| 13***24 | Sleeve As-Adjustment | 2 |
| 1J***36 | Pin-Spring; (Spring) | 2 |
324-0532 Pump Gp-Fuel Injection
| 24***58 | Plate-Gauge | 4 |
| 32***19 | Adjuster Group-Height; -Rh | 2 |
| 32***21 | Adjuster Group-Height; -Lh | 2 |
352-6584 Pump Gp-Fuel Injection
| 13***22 | Rod-Threaded; (1-5-Acme Thd) | 2 |
| 13***25 | Sleeve As-Adjustment | 2 |
| 1J***36 | Pin-Spring; (Spring) | 2 |
212-3657 Pump Gp-Fuel Prm & Water Sep -Electric
| 1J***36 | Pin-Spring; (Spring) | 2 |
| 21***57 | Pump Group-Fuel Prm & Water Sep; -Electric-Primary Filter | 1 |
| 25***56 | Sleeve As-Adjustment; (Lh Thread) | 2 |
358-6633 Rail Gp-Fuel
| 1J***36 | Pin-Spring; (Spring) | 2 |
| 25***63 | Rod-Threaded; (1-8-Acme Thd) | 2 |
| 25***64 | Sleeve As-Adjustment; (Rh Thread) | 2 |
324-9679 Tank Gp-Fuel
| 27***84 | Film-Instruction; (Mat Thickness, Cw To Increase) | 2 |
| 28***90 | Shaft As | 2 |
| 29***65 | Trunnion | 2 |
Grade References
109-5622 Leveler Gp -40-Ft Grade Reference
| 10***22 | Leveler Group; -40-Ft Grade Reference | 1 |
109-5628 Leveler Gp -30-Ft Grade Reference
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
109-5626 Leveler Gp -Outboard
| 10***26 | Leveler Group; -Outboard | 1 |
109-5627 Leveler Gp -40-Ft Grade Reference
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
109-5624 Leveler Gp -30-Ft Grade Reference
| 10***24 | Leveler Group; -30-Ft Grade Reference | 1 |
109-5623 Leveler Gp -30-Ft Grade Reference
| 10***23 | Leveler Group; -30-Ft Grade Reference | 1 |
109-5625 Leveler Gp -30-Ft Grade Reference
| 10***25 | Leveler Group; -30-Ft Grade Reference | 1 |
Hydraulic System
258-7161 Adapter Gp-Motor
| 14***49 | Hose As | 1 |
| 14***76 | Elbow As | 2 |
| 14***93 | Elbow Group | 1 |
242-2749 Adapter Gp-Motor
| 10***36 | Clip | 2 |
| 10***03 | Plate-Cover | 5 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
334-3260 Cover Gp
| 14***52 | Union As | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 2 |
| 24***53 | Nut-Special; (M6x1-Thd) | 2 |
323-6351 Cover Gp
| 13***89 | Clip; (Ladder) | 1 |
| 17***35 | Ring-Retaining | 12 |
| 18***50 | Fitting As; (Quick) | 12 |
270-7226 Cylinder & Mtg Gp-Auger
| 17***15 | Strap; (Dual Clamp) | 1 |
| 20***45 | Mount; (Dual Swivel) | 4 |
| 20***65 | Elbow As | 2 |
323-8196 Cylinder & Mtg Gp-Hopper
| 10***05 | Plate | 4 |
| 11***71 | Hose As | 1 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
270-7224 Cylinder & Mtg Gp-Screed Hoist
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***84 | Pin As | 4 |
| 14***74 | Elbow As | 10 |
333-0274 Cylinder & Mtg Gp-Tow Point
| 10***36 | Clip | 1 |
| 10***05 | Plate | 1 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 1 |
270-3560 Cylinder Gp-Hydraulic
| 10***05 | Plate | 4 |
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***09 | Adapter As | 3 |
197-9766 Cylinder Gp-Hydraulic -Slope
| 10***03 | Plate-Cover | 5 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
| 15***90 | Bolt-Stacking; (M8x1.25x33-mm) | 4 |
135-0218 Cylinder Gp-Hydraulic -Extender
| 10***05 | Plate | 4 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 1 |
| 14***45 | Connector As | 8 |
268-1692 Cylinder Gp-Hydraulic
| 10***03 | Plate-Cover | 1 |
| 10***05 | Plate | 3 |
| 10***22 | Support As; (Lh) | 1 |
251-0781 Cylinder Gp-Hydraulic
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 6 |
| 14***72 | Elbow Group | 4 |
270-2436 Cylinder Gp-Hydraulic -Screed Hoist
| 10***05 | Plate | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***45 | Connector As | 2 |
275-0895 Cylinder Gp-Hydraulic
| 10***81 | Hose As | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***66 | Elbow Group | 1 |
292-8449 Cylinder Gp-Hydraulic
| 14***24 | Connector Group | 1 |
| 14***27 | Connector Group | 1 |
| 14***29 | Connector As | 1 |
194-7260 Cylinder Gp-Hydraulic -Auger, Lh
| 12***67 | Hose As | 1 |
| 14***68 | Elbow Group | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
194-7259 Cylinder Gp-Hydraulic
| 03***06 | Seal (Use As Required) | 1 |
| 12***95 | Elbow | 0 |
| 13***89 | Clip; (Ladder) | 1 |
325-1854 Drive Gp-Pump
| 10***20 | Seal-O-Ring | 2 |
| 11***80 | Elbow | 1 |
| 14***27 | Connector Group | 4 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 14***28 | Connector Assem. | 2 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 2 |
258-4664 Fitting & Mtg Gp-Hydraulic -Front, Rh Frame
| 17***39 | Bolt-Socket Head; (M8x1.25x30-mm) | 4 |
| 24***12 | Ring | 1 |
| 24***85 | Coupling | 1 |
258-4663 Fitting & Mtg Gp-Hydraulic -Front, Lh Frame
| 17***39 | Bolt-Socket Head; (M8x1.25x30-mm) | 4 |
| 24***48 | Coupling As | 1 |
| 25***63 | Fitting & Mtg Group-Hydraulic; -Front, Lh Frame | 1 |
258-7190 Fitting & Mtg Gp-Hydraulic -Rear, Rh Frame
| 09***32 | Ring-Retaining | 1 |
| 17***39 | Bolt-Socket Head; (M8x1.25x30-mm) | 4 |
| 24***49 | Adapter Group-Motor | 1 |
258-7194 Fitting & Mtg Gp-Hydraulic -Rear, Lh Frame
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 14***28 | Tee As-Orfs | 1 |
| 15***11 | Elbow | 1 |
286-3620 Hydraulic Ar
| 09***32 | Ring-Retaining | 1 |
| 17***39 | Bolt-Socket Head; (M8x1.25x30-mm) | 4 |
| 24***49 | Adapter Group-Motor | 1 |
340-5640 Hydraulic Ar
| 31***08 | Kit-Seal | 1 |
| 34***40 | Hydraulic Ar | 1 |
321-2416 Hydraulic Ar
| 26***11 | Kit-Seal; (Paver Ventilation Motor) | 1 |
| 32***16 | Hydraulic Ar | 1 |
323-2198 Hydraulic Ar-Auxiliary
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
323-8179 Hydraulic Ar-Fan
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
321-2438 Hydraulic Ar-Tamper
| 07***53 | Pin; (Spring) | 2 |
| 13***95 | Orifice | 2 |
| 13***57 | Plug | 1 |
323-8178 Hydraulic Ar-Vibratory
| 10***20 | Seal-O-Ring | 1 |
| 14***45 | Connector As | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
324-3243 Lines Gp-Auger
| 14***25 | Connector As. | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 32***43 | Lines Group-Auger | 1 |
324-3245 Lines Gp-Brake & Shift
| 32***45 | Lines Group-Brake & Shift | 1 |
| 32***06 | Pump Group-Gear; (Hydraulic Fan) | 1 |
| 8T***56 | Bolt-Plt; (M12 X 1.75 X 35) | 2 |
286-3635 Lines Gp-Connecting
| 10***15 | Elbow Group | 1 |
| 12***88 | Flange-Split | 8 |
| 13***38 | Connector | 1 |
323-8188 Lines Gp-Conveyor
| 00***91 | Cup-Roller Bearing | 1 |
| 07***35 | Kit-Bearing; (Auxiliary Pump) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
350-5979 Lines Gp-Extender
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 3 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
295-3078 Lines Gp-Extender
| 08***56 | 90 Degrees Elbow | 1 |
| 12***57 | Clamp-Hose | 1 |
| 13***74 | Tube As-Drain | 1 |
286-3629 Lines Gp-Extender
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 12 |
| 26***60 | Dowel | 4 |
| 27***38 | Kit-Piston | 2 |
350-1624 Lines Gp-Extender
| 00***39 | Adapter-Pipe | 1 |
| 03***06 | Seal (Use As Required) | 1 |
| 13***00 | Clip; (Tab) | 2 |
276-4585 Lines Gp-Extension
| 13***89 | Clip; (Ladder) | 1 |
| 14***18 | Connector As | 2 |
| 14***19 | Connector As | 1 |
324-3242 Lines Gp-Hopper
| 10***03 | Manifold; (Forward Return,Rear Return) | 2 |
| 14***81 | Elbow | 1 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 2 |
325-9375 Lines Gp-Hopper
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***78 | Union | 1 |
| 12***47 | Elbow | 1 |
351-0904 Lines Gp-Hydraulic
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 25***67 | Valve Group-Bank 2; -Control | 1 |
324-3252 Lines Gp-Hydraulic Fan
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***16 | Connector Group | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
336-2034 Lines Gp-Pressure Test
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 7 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 4 |
324-3246 Lines Gp-Pump -Auxiliary
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 15***43 | Connector As. | 1 |
324-3247 Lines Gp-Return
| 08***56 | 90 Degrees Elbow | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***00 | Clip; (Tab) | 2 |
324-3241 Lines Gp-Screed
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***61 | Elbow Group | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
253-4756 Lines Gp-Slope
| 11***80 | Elbow | 1 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 2 |
| 15***59 | Tee Group | 1 |
324-3248 Lines Gp-Slope
| 21***56 | Cartridge As-Valve | 1 |
| 21***57 | Kit-Seal | 1 |
| 21***58 | Knob; (Hand) | 1 |
286-3627 Lines Gp-Tamper
| 27***83 | Seal-O-Ring | 4 |
| 27***88 | Valve Group-Check; (Pilot Operated)(Screed Extension) | 2 |
| 28***27 | Lines Group-Tamper | 1 |
350-5989 Lines Gp-Tamper
| 22***84 | Coil As; (24-Volt) | 1 |
| 23***82 | Nut-Special | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
325-8414 Lines Gp-Tamper
| 23***82 | Nut-Special | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
| 25***59 | Kit-Seal | 1 |
324-3244 Lines Gp-Track Tension
| 26***51 | Kit-Solenoid Valve; (Auger Raise, Lower) | 2 |
| 26***26 | Kit-Check Valve; (Apron Fold) | 2 |
| 32***44 | Lines Group-Track Tension | 1 |
328-2195 Lines Gp-Truck Hitch
| 26***51 | Kit-Solenoid Valve; (Auger Raise, Lower) | 2 |
| 30***43 | Cap, Main Bearing, Main Bearing Cap, Kit-Valve; (Control) | 2 |
| 30***61 | Kit-Valve; (Pressure) | 1 |
286-3628 Lines Gp-Vibratory
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 28***28 | Lines Group-Vibratory | 1 |
| 31***18 | Valve-Servo | 2 |
276-4584 Lines Gp-Vibratory
| 21***14 | Seal-O-Ring | 1 |
| 21***74 | Seal & Retainer As | 2 |
| 21***75 | Seal-O-Ring | 1 |
323-8190 Lines Gp-Vibratory
| 1T***43 | Ball Bearing | 2 |
| 24***43 | Plug | 1 |
| 24***63 | Shaft As-Drive | 1 |
350-9317 Lines Gp-Vibratory
| 09***01 | Bolt-Socket Head; (M8x1.25x40-mm) | 6 |
| 1T***43 | Ball Bearing | 2 |
| 24***43 | Plug | 1 |
359-0123 Lines Gp-Vibratory
| 1T***43 | Ball Bearing | 2 |
| 24***43 | Plug | 1 |
| 24***80 | Shaft As-Drive | 1 |
295-3083 Lines Gp-Vibratory
| 29***83 | Lines Group-Vibratory | 1 |
265-7799 Lines Gp-Vibratory
| 26***99 | Lines Group-Vibratory | 1 |
| 33***56 | Kit-Seal | 1 |
| 35***86 | Valve Group-Solenoid; (Ventilation) | 1 |
354-1626 Lines Gp-Vibratory
| 1T***43 | Ball Bearing | 2 |
| 24***43 | Plug | 1 |
| 24***80 | Shaft As-Drive | 1 |
286-3630 Manifold Gp-Control -Screed
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 24***05 | Shaft Group-Vibratory | 1 |
| 26***49 | Housing Group-Eccentric Weight; -Main, Lh | 1 |
323-8187 Motor & Mtg Gp-Auger
| 26***49 | Housing Group-Eccentric Weight; -Main, Lh | 2 |
| 32***87 | Motor & Mtg Group-Auger | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 8 |
283-0351 Motor & Mtg Gp-Hydraulic Fan
| 09***99 | Fitting-Grease; (Hydraulic) | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***33 | Key-Square; (1/4in X 3/4in Lg) | 4 |
323-8183 Motor & Mtg Gp-Propel
| 00***39 | Adapter-Pipe | 4 |
| 10***95 | Bearing | 4 |
| 10***39 | Key-Square | 4 |
258-7185 Motor & Mtg Gp-Tamper -Main, Lh
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***87 | Start Switch Assembly; (Key)(Engine) | 1 |
| 12***74 | Cover-Connector; (Wire Router) | 4 |
258-7162 Motor & Mtg Gp-Tamper -Main, Rh
| 03***69 | Tube | 4 |
| 17***55 | Pin | 2 |
| 24***14 | Rod | 2 |
258-7186 Motor & Mtg Gp-Tamper
| 09***03 | Key; (Square) | 2 |
| 14***91 | Steering Wheel As | 2 |
| 15***68 | Plug | 2 |
332-6606 Motor & Mtg Gp-Ventilation
| 08***11 | Ring | 2 |
| 09***33 | Key-Square | 1 |
| 16***32 | Block As-Mounting | 1 |
263-5148 Motor & Mtg Gp-Vibratory -Screed
| 08***11 | Ring | 2 |
| 09***33 | Key-Square | 1 |
| 19***90 | Sensor Group-Position; -Steering | 1 |
308-2125 Motor Gp-Gear
| 27***48 | Control Group-Unprgmed Monitor; -Advisor | 1 |
| 30***25 | Motor Group-Gear; -Vibratory | 1 |
266-9833 Motor Gp-Gear -Paver Ventilation
| 23***00 | Cover-Switch | 1 |
| 23***01 | Cover-Switch | 1 |
| 23***03 | Cover-Switch | 2 |
190-8789 Motor Gp-Piston -Auger
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 14***44 | Plug As-Connector; (70-Pin) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
230-9384 Motor Gp-Piston -Conveyor
| 15***62 | Knob | 2 |
| 23***84 | Motor Group-Piston; -Conveyor | 1 |
| 2M***19 | Ring-Retaining | 2 |
269-0530 Motor Gp-Piston -Propel
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 10 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
325-8415 Pump & Mtg Gp-Auxiliary
| 10***14 | Knob | 2 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 2 |
| 15***93 | Screw-Button Head; (M4x0.7x12-mm) | 2 |
323-8191 Pump & Mtg Gp-Auxiliary
| 23***39 | Floor Mat | 2 |
| 27***57 | Floor Mat | 1 |
| 27***26 | Floor Mat | 1 |
324-3250 Pump & Mtg Gp-Hydraulic Fan
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 32***35 | Guard Group-Vandalism | 2 |
| 32***50 | Pump & Mtg Group-Hydraulic Fan | 1 |
323-8182 Pump & Mtg Gp-Propel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
230-9385 Pump Gp-Piston -Auxiliary
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
348-8146 Pump Gp-Piston -Tamper
| 28***93 | Cover Group-Screed | 1 |
| 31***00 | Platform Group-Operator; -Slide | 1 |
| 34***46 | Pump Group-Piston; -Tamper | 1 |
269-0533 Pump Gp-Piston
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
339-3533 Pump Gp-Piston -Propel
| 08***97 | Washer; (13x50x6-mm Thk) | 3 |
| 10***38 | Collar | 1 |
| 14***74 | Extension As-Platform | 2 |
355-9786 Rotating Gp-Pump -Tamper
| 11***33 | Washer; (11x50x6-mm Thk) | 2 |
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 2 |
| 19***01 | Bracket | 2 |
323-8180 Tank & Mtg Gp-Hydraulic
| 17***11 | Locknut; (M16x2-Thd) | 4 |
| 24***09 | Damper | 8 |
| 25***38 | Pad | 4 |
324-3253 Tank Gp-Hydraulic
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 13***00 | Clip; (Tab) | 4 |
| 13***64 | Bushing | 2 |
343-7765 Valve & Mtg Gp -Main Frame Extension
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 2 |
| 23***51 | Seat Group-Suspension; -Vinyl | 2 |
325-9374 Valve & Mtg Gp -Apron Fold
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 13***64 | Bushing | 2 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
323-8193 Valve & Mtg Gp-Auxiliary -Cooler
| 19***32 | Kit-Foam Back | 1 |
| 20***36 | Kit-Damper | 1 |
| 20***37 | Kit-Seat; (Indicators) | 1 |
325-8413 Valve & Mtg Gp-Auxiliary
| 32***13 | Valve & Mtg Group-Auxiliary | 1 |
323-8192 Valve & Mtg Gp-Control -Brake Release
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 2 |
| 14***67 | Elbow Group; (Each Includes) | 2 |
| 32***92 | Valve & Mtg Group-Control; -Brake Release | 1 |
256-2539 Valve & Mtg Gp-Control -Screed Extension
| 25***39 | Valve & Mtg Group-Control; -Screed Extension | 1 |
323-8195 Valve & Mtg Gp-Counterbalance -Hopper Hoist, Tow Point
| 27***40 | Kit-Seal; (Pump Drive) | 1 |
| 27***41 | Kit-Bearing | 1 |
| 32***90 | Gauge-Sight; (Oil Level) | 1 |
332-6607 Valve & Mtg Gp-Flow Control -Ventilation
| 14***75 | Elbow Group | 1 |
| 15***26 | Union Assembly | 2 |
| 17***15 | Strap; (Dual Clamp) | 2 |
323-8194 Valve & Mtg Gp-Track Tensioner
| 11***87 | Screw | 1 |
| 11***88 | Seal; (O-Ring) | 1 |
| 11***89 | Cap | 1 |
328-2194 Valve & Mtg Gp-Truck Hitch
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
| 22***76 | Pump Group-Hand; -Manual Brake Release | 1 |
323-8189 Valve & Mtg Gp-Vibratory
| 23***43 | Knob | 1 |
| 31***34 | Kit-Seal; (Check Valve) | 1 |
| 32***89 | Valve & Mtg Group-Vibratory | 1 |
215-3511 Valve Gp-Accumulator Charging
| 09***69 | Bolt | 4 |
| 10***55 | Plate | 1 |
| 17***24 | Bar | 2 |
252-9467 Valve Gp-Bank 2 -Control
| 01***41 | Setscrew-Socket | 3 |
| 25***67 | Valve Group-Bank 2; -Control | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
270-3549 Valve Gp-Control
| 21***70 | Footshaft Group | 2 |
| 27***49 | Valve Group-Control; -2-Bank | 1 |
| 32***44 | Guard Group-Conveyor | 1 |
269-0535 Valve Gp-Control
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
| 21***04 | Bolt-Socket Head; (7/16-20x4.5-In) | 2 |
230-9160 Valve Gp-Control -Truck Hitch
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***47 | Tube As | 1 |
292-9094 Valve Gp-Counterbalance -Hopper Hoist, Tow Point
| 10***85 | Plate | 2 |
| 10***91 | Pipe | 2 |
| 10***96 | Plate | 1 |
332-6609 Valve Gp-Flow Control -Ventilation
| 05***20 | Pin-Spring | 100 |
| 12***46 | Bar-Feeder | 50 |
| 33***09 | Valve Group-Flow Control; -Ventilation | 1 |
276-6041 Valve Gp-Pump Control
| 10***56 | Rod; (Prop) | 4 |
| 11***77 | Bumper-Rubber | 4 |
| 12***27 | Spacer; (9x14x3.5-mm Thk) | 1 |
356-6895 Valve Gp-Pump Control -Pressure, Flow Compensator-Tamper
| 33***39 | Panel As | 1 |
| 33***40 | Louver As | 1 |
| 35***95 | Valve Group-Pump Control; -Pressure, Flow Compensator-Tamper | 1 |
346-9504 Valve Gp-Solenoid
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 4 |
294-0802 Valve Gp-Solenoid
| 29***02 | Valve Group-Solenoid | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
276-6042 Valve Gp-Solenoid
| 10***99 | Sprocket As; (12-Teeth) | 2 |
| 13***92 | Key-Square | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
310-8017 Valve Gp-Solenoid
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 2 |
357-8869 Valve Gp-Solenoid
| 31***84 | Tube | 2 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 2 |
| 34***66 | Segment-Quarter Auger; (Lh Inner/Rh Outer) | 2 |
332-1453 Valve Gp-Solenoid
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 4 |
242-2753 Vibratory Gp -Rear, Rh
| 24***53 | Vibratory Group; -Rear, Rh | 1 |
| 32***85 | Pump & Mtg Group-Conveyor | 1 |
| 32***86 | Motor & Mtg Group-Conveyor | 1 |
242-2751 Vibratory Gp -Front, Rh
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
265-0684 Vibratory Gp
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***25 | Connector As. | 11 |
| 14***27 | Connector Group | 2 |
263-2536 Vibratory Gp -Hydraulic
| 10***20 | Seal-O-Ring | 2 |
| 11***80 | Elbow | 1 |
| 14***27 | Connector Group | 3 |
276-4572 Vibratory Gp
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 4 |
| 10***30 | Bearing-Flange | 2 |
| 10***70 | Key-Square | 2 |
295-3082 Vibratory Gp
| 10***68 | Nipple-Pipe | 2 |
| 11***99 | Pin As-Pivot | 2 |
| 13***77 | Lockout | 4 |
350-5959 Vibratory Gp
| 22***36 | Bolt; (M24x2x85-mm) | 2 |
| 25***53 | Washer; (25x55x8-mm Thk) | 2 |
| 27***48 | Pin | 2 |
242-2752 Vibratory Gp -Rear, Lh
| 12***54 | Screw-Flat Head; (M12x1.75x35-mm) | 48 |
| 19***40 | Plate | 2 |
| 21***33 | Plate | 2 |
242-2750 Vibratory Gp -Front, Lh
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 23***32 | Extension Group-Auger; -6-In | 1 |
Implements
287-2280 Blade & Heater Gp-Tamper
| 11***73 | Film-Stripe; (450-cm Each) | 0 |
| 11***75 | Film-Identification; (Barber-Greene)(Barber-Greene) | 3 |
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
339-1646 Blade & Heater Gp-Tamper
| 15***02 | Spacer; (11x20x15-mm Thk) | 2 |
| 19***88 | Clip | 2 |
| 1G***70 | Extension-Curve | 1 |
295-2112 Blade & Heater Gp-Tamper
| 29***12 | Blade & Heater Group-Tamper | 1 |
| 31***68 | Kit-Diaphragm | 1 |
| 31***69 | Kit-Valve | 1 |
328-9581 Blade & Heater Gp-Tamper -750-Mm Extension
| 15***02 | Spacer; (11x20x15-mm Thk) | 2 |
| 16***00 | Connector As | 1 |
| 19***88 | Clip | 2 |
339-1673 Blade & Heater Gp-Tamper
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 10***90 | Hose As | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
276-5032 Cylinder & Mtg Gp-Apron
| 00***14 | Coupling-Pipe | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
288-9424 Extension Ar -Electric Heat, 7-M
| 28***24 | Extension Ar; -Electric Heat, 7-M | 1 |
350-1625 Extension Ar -Power Main Frame Extension
| 35***25 | Extension Ar; -Power Main Frame Extension | 1 |
241-9103 Extension Ar-Auger
| 24***03 | Extension Ar-Auger | 1 |
288-9422 Extension Ar-Screed -Electric Heat, 5.5-M
| 28***22 | Extension Ar-Screed; -Electric Heat, 5.5-M | 1 |
339-9631 Extension Ar-Screed -Electric Heat, 5.5-M
| 33***31 | Extension Ar-Screed; -Electric Heat, 5.5-M | 1 |
359-1030 Extension Ar-Screed -Electric Heat, 6.5-M
| 35***30 | Extension Ar-Screed; -Electric Heat, 6.5-M | 1 |
366-6858 Extension Ar-Screed -Electric Heat, 6.5-M
| 36***58 | Extension Ar-Screed; -Electric Heat, 6.5-M | 1 |
350-6037 Extension Ar-Screed -Electric Heat, 7-M
| 35***37 | Extension Ar-Screed; -Electric Heat, 7-M | 1 |
350-6036 Extension Ar-Screed -Electric Heat, 6.5-M
| 35***36 | Extension Ar-Screed; -Electric Heat, 6.5-M | 1 |
366-6675 Extension Ar-Screed -Electric Heat, 6.5-M
| 36***75 | Extension Ar-Screed; -Electric Heat, 6.5-M | 1 |
328-9593 Extension Ar-Screed -Electric Heat, 6.5-M
| 32***93 | Extension Ar-Screed; -Electric Heat, 6.5-M | 1 |
341-2289 Extension Ar-Screed -Electric Heat, 6.5-M
| 34***89 | Extension Ar-Screed; -Electric Heat, 6.5-M | 1 |
359-1040 Extension Ar-Screed -Electric Heat, 8-M
| 35***40 | Extension Ar-Screed; -Electric Heat, 8-M | 1 |
328-9570 Extension Ar-Screed -Electric Heat, 5.5-M
| 32***70 | Extension Ar-Screed; -Electric Heat, 5.5-M | 1 |
360-3420 Extension Ar-Screed -8-M
| 36***20 | Extension Ar-Screed; -8-M | 1 |
288-9426 Extension Ar-Screed -Electric Heat, 6.5-M
| 28***26 | Extension Ar-Screed; -Electric Heat, 6.5-M | 1 |
328-9606 Extension Ar-Screed -Electric Heat, 7-M
| 32***06 | Extension Ar-Screed; -Electric Heat, 7-M | 1 |
341-2290 Extension Ar-Screed -Electric Heat, 7-M
| 34***90 | Extension Ar-Screed; -Electric Heat, 7-M | 1 |
292-8833 Extension Gp-Screed -6.5-M
| 29***33 | Extension Group-Screed; -6.5-M | 1 |
282-8506 Extension Gp-Screed -16-Ft
| 28***06 | Extension Group-Screed; -16-Ft | 1 |
282-8505 Extension Gp-Screed -20-Ft, 2-In
| 28***05 | Extension Group-Screed; -20-Ft, 2-In | 1 |
282-8507 Extension Gp-Screed -18-Ft
| 28***07 | Extension Group-Screed; -18-Ft | 1 |
287-0329 Extension Gp-Screed
| 28***29 | Extension Group-Screed | 1 |
292-0674 Extension Gp-Screed
| 29***74 | Extension Group-Screed | 1 |
350-6035 Extension Gp-Screed -5.5-M
| 35***35 | Extension Group-Screed; -5.5-M | 1 |
282-8509 Extension Gp-Screed
| 28***09 | Extension Group-Screed; -5.5-M | 1 |
282-8504 Extension Gp-Screed -5.3-M
| 28***04 | Extension Group-Screed; -5.3-M | 1 |
350-6034 Extension Gp-Screed -4.9-M
| 35***34 | Extension Group-Screed; -4.9-M | 1 |
350-6033 Extension Gp-Screed -6.2-M
| 35***33 | Extension Group-Screed; -6.2-M | 1 |
253-4745 Extension Gp-Screed -Electric Heat, 24-In
| 25***45 | Extension Group-Screed; -Electric Heat, 24-In | 1 |
253-4744 Extension Gp-Screed
| 25***44 | Extension Group-Screed | 1 |
292-0673 Extension Gp-Screed
| 29***73 | Extension Group-Screed | 1 |
291-8020 Extension Gp-Screed
| 29***20 | Extension Group-Screed | 1 |
287-0328 Extension Gp-Screed
| 28***28 | Extension Group-Screed | 1 |
301-1469 Hitch Gp-Truck
| 30***69 | Hitch Group-Truck | 1 |
285-9947 Housing Gp-Eccentric Weight
| 28***47 | Housing Group-Eccentric Weight | 1 |
263-5150 Housing Gp-Eccentric Weight -Main, Rh
| 26***50 | Housing Group-Eccentric Weight; -Main, Rh | 1 |
263-5151 Housing Gp-Eccentric Weight -Extension
| 26***51 | Housing Group-Eccentric Weight; -Extension | 1 |
263-5149 Housing Gp-Eccentric Weight -Main, Lh
| 26***49 | Housing Group-Eccentric Weight; -Main, Lh | 1 |
327-4620 Indicator Gp-Tow Point
| 32***20 | Indicator Group-Tow Point | 1 |
325-4950 Plate Gp-Slide
| 32***50 | Plate Group-Slide | 1 |
301-7385 Roller Ar-Push
| 30***85 | Roller Ar-Push | 1 |
301-6988 Roller Gp-Push
| 30***88 | Roller Group-Push | 1 |
112-1276 Shaft Gp-Drive -Eccentric Weight
| 11***76 | Shaft Group-Drive; -Eccentric Weight | 1 |
296-9358 Shaft Gp-Vibratory -Eccentric, Lh
| 29***58 | Shaft Group-Vibratory; -Eccentric, Lh | 1 |
296-9357 Shaft Gp-Vibratory -Eccentric, Rh
| 29***57 | Shaft Group-Vibratory; -Eccentric, Rh | 1 |
350-9125 Tamper Gp-Screed -Front, Rh
| 35***25 | Tamper Group-Screed; -Front, Rh | 1 |
251-0764 Tamper Gp-Screed
| 25***64 | Tamper Group-Screed | 1 |
359-1038 Tamper Gp-Screed
| 35***38 | Tamper Group-Screed | 1 |
292-4011 Tamper Gp-Screed -Rh
| 29***11 | Tamper Group-Screed; -Rh | 1 |
292-4010 Tamper Gp-Screed -Lh
| 29***10 | Tamper Group-Screed; -Lh | 1 |
350-9126 Tamper Gp-Screed -Rear, Lh
| 35***26 | Tamper Group-Screed; -Rear, Lh | 1 |
350-9127 Tamper Gp-Screed -Rear, Rh
| 35***27 | Tamper Group-Screed; -Rear, Rh | 1 |
350-9124 Tamper Gp-Screed -Front, Lh
| 35***24 | Tamper Group-Screed; -Front, Lh | 1 |
359-1033 Tamper Gp-Screed
| 35***33 | Tamper Group-Screed | 1 |
350-9123 Tamper Gp-Screed
| 35***23 | Tamper Group-Screed | 1 |
340-0125 Tube Gp-Extension -Sliding
| 34***25 | Tube Group-Extension; -Sliding | 1 |
339-9762 Tube Gp-Extension -Sliding
| 33***62 | Tube Group-Extension; -Sliding | 1 |
251-0767 Tube Gp-Extension -Telescoping
| 25***67 | Tube Group-Extension; -Telescoping | 1 |
Lubrication System
329-9440 Filter Gp-Engine Oil
| 21***81 | Cover As | 1 |
| 22***63 | Valve As-Air | 1 |
| 25***02 | Filter Element As-Air; (Primary) | 1 |
332-6608 Lines Gp-Fan Drive
| 13***99 | Clamp As | 1 |
| 17***92 | Lanyard | 2 |
| 28***75 | Cover | 1 |
298-5112 Pump Gp-Engine Oil
| 11***79 | Gasket | 2 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 8 |
| 18***27 | Plate | 2 |
Machine Arrangement
321-2417 Chassis Ar
| 27***04 | Lines Group-Grease | 1 |
| 27***69 | Guide Group-Steering | 1 |
| 32***17 | Chassis Ar | 1 |
321-2414 Common Ar
| 29***41 | Undercarriage Ar | 1 |
| 32***14 | Common Ar | 1 |
| 32***15 | Electrical Ar | 1 |
355-7312 Common Ar
| 29***41 | Undercarriage Ar | 1 |
| 32***15 | Electrical Ar | 1 |
| 32***16 | Hydraulic Ar | 1 |
328-9592 Conversion Ar-Screed -Electric Heat, 750-Mm Extension
| 32***79 | Plate & Heater Group-Screed; -750-mm Extension | 1 |
| 32***81 | Blade & Heater Group-Tamper; -750-mm Extension | 1 |
| 32***91 | Wiring Group-Screed Heater; -750-mm Extension | 1 |
295-2101 Conversion Ar-Screed -Electric Heat
| 29***01 | Conversion Ar-Screed; -Electric Heat | 1 |
| 29***11 | Plate & Heater Group-Screed | 1 |
| 29***12 | Blade & Heater Group-Tamper | 1 |
299-7244 Conversion Ar-Screed -Electric Heat, 250-Mm Extension
| 03***57 | Washer; (13x26x6-mm Thk) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
356-4008 Distribution Ar
| 16***20 | Control Group-Thickness; -Lh Thread | 1 |
| 28***25 | Lighting Group-Flood | 1 |
| 29***12 | Sensor Group-Position | 1 |
356-4010 Distribution Ar
| 19***79 | Sensor Group-Auger | 1 |
| 27***34 | Control Group-Thickness; -Lh Thread | 1 |
| 28***25 | Lighting Group-Flood | 1 |
356-4009 Distribution Ar
| 27***34 | Control Group-Thickness; -Lh Thread | 1 |
| 28***25 | Lighting Group-Flood | 1 |
| 29***12 | Sensor Group-Position | 1 |
327-4619 Kit-Maintenance
| 10***84 | Relay As; (24-Volt) | 1 |
| 10***87 | Switch As-Toggle; (Screed Raise/Hld/Float) | 1 |
| 11***90 | Fuse; (10 Amp) | 2 |
354-8217 Option Ar-Hopper
| 32***73 | Hopper Group; -Hydraulic | 1 |
| 34***07 | Flashing Group; -Belting-Hydraulic Fold | 1 |
| 35***17 | Option Ar-Hopper | 1 |
354-8216 Option Ar-Hopper
| 32***73 | Hopper Group; -Hydraulic | 1 |
| 34***06 | Flashing Group; -Plastic-Hydraulic Fold | 1 |
| 35***16 | Option Ar-Hopper | 1 |
354-8220 Option Ar-Hopper -Manual Fold
| 27***60 | Plate Group | 1 |
| 34***08 | Flashing Group; -Plastic-Manual Fold | 1 |
| 35***20 | Option Ar-Hopper; -Manual Fold | 1 |
354-8221 Option Ar-Hopper -Manual Fold, Eame
| 27***60 | Plate Group | 1 |
| 34***09 | Flashing Group; -Belting-Manual Fold | 1 |
| 35***21 | Option Ar-Hopper; -Manual Fold, Eame | 1 |
354-8224 Option Ar-Machine
| 27***79 | Control Group-Decelerator | 1 |
| 32***36 | Ventilation Group-Paver | 1 |
| 33***23 | Canopy Group | 1 |
354-8223 Option Ar-Machine
| 27***84 | Cover Group-Platform | 1 |
| 32***36 | Ventilation Group-Paver | 1 |
| 32***22 | Walkway Group | 1 |
354-8227 Option Ar-Machine
| 27***79 | Control Group-Decelerator | 1 |
| 33***23 | Canopy Group | 1 |
| 33***60 | Cover Group | 1 |
354-8225 Option Ar-Machine
| 27***79 | Control Group-Decelerator | 1 |
| 32***22 | Walkway Group | 1 |
| 33***60 | Cover Group | 1 |
354-8228 Option Ar-Machine
| 27***84 | Cover Group-Platform | 1 |
| 33***23 | Canopy Group | 1 |
| 33***60 | Cover Group | 1 |
354-8222 Option Ar-Machine
| 27***79 | Control Group-Decelerator | 1 |
| 32***36 | Ventilation Group-Paver | 1 |
| 32***22 | Walkway Group | 1 |
354-8226 Option Ar-Machine
| 27***84 | Cover Group-Platform | 1 |
| 32***22 | Walkway Group | 1 |
| 33***60 | Cover Group | 1 |
354-8232 Option Ar-Screed -Tamper, Vibratory Adapter
| 32***37 | Wiring Group-Screed Heater | 1 |
| 32***66 | Option Ar-Screed | 1 |
| 35***32 | Option Ar-Screed; -Tamper, Vibratory Adapter | 1 |
354-8231 Option Ar-Screed -Vibratory Adapter
| 33***62 | Cover Group | 1 |
| 35***31 | Option Ar-Screed; -Vibratory Adapter | 1 |
354-8233 Option Ar-Screed -Tamper, Viberatory Adptr, Eame
| 32***37 | Wiring Group-Screed Heater | 1 |
| 32***38 | Hydraulic Ar-Tamper | 1 |
| 35***33 | Option Ar-Screed; -Tamper, Viberatory Adptr, Eame | 1 |
354-8229 Option Ar-Washdown -Diesel
| 27***57 | Reel Group-Washdown Hose | 1 |
| 33***57 | Washdown Group-Ecology | 1 |
| 35***29 | Option Ar-Washdown; -Diesel | 1 |
354-8218 Option Ar-Washdown -Ecology Tank-Ecology Tank, Wand
| 32***38 | Hydraulic Ar-Tamper | 1 |
| 32***44 | Wiring Group-Screed Heater | 1 |
| 35***18 | Option Ar-Washdown; -Ecology Tank-Ecology Tank, Wand | 1 |
354-8219 Option Ar-Washdown -Ecology Tank-Ecology Tank, Reel
| 27***58 | Lines Group-Spray Down | 1 |
| 33***57 | Washdown Group-Ecology | 1 |
| 35***19 | Option Ar-Washdown; -Ecology Tank-Ecology Tank, Reel | 1 |
354-8230 Option Ar-Washdown -Diesel
| 27***58 | Lines Group-Spray Down | 1 |
| 32***67 | Washdown Group; -Diesel Fuel | 1 |
| 35***30 | Option Ar-Washdown; -Diesel, Reel | 1 |
281-6251 Screed Ar -As4251c, International
| 27***72 | Vibratory Group | 1 |
| 27***73 | Sloper Group-Power | 1 |
| 27***79 | Adjuster Group-Height | 1 |
276-4539 Screed Ar -As3251c, U.S.
| 27***39 | Screed Ar; -As3251c, U.S. | 1 |
| 27***57 | Reel Group-Washdown Hose | 1 |
| 32***67 | Washdown Group; -Diesel Fuel | 1 |
339-1637 Screed Ar
| 26***84 | Vibratory Group | 1 |
| 26***99 | Lines Group-Vibratory | 1 |
| 29***13 | Frame Group-Screed | 1 |
294-0947 Screed Ar
| 25***66 | Deflector Group | 1 |
| 25***68 | Adjuster Group-Manual | 1 |
| 25***70 | Lines Group-Grease | 1 |
351-0900 Screed Ar
| 28***24 | Heater Ar-Screed; -Electric | 1 |
| 28***24 | Box Group-Screed Control; -Electronic | 1 |
| 29***35 | Crown Group-Power | 1 |
295-2102 Screed Ar
| 25***35 | Gate Group-End | 1 |
| 25***52 | Adjuster Group-Height | 1 |
| 25***56 | Lines Group-Slope | 1 |
356-8830 Special Ar-Screed
| 28***24 | Heater Ar-Screed; -Electric | 1 |
| 28***24 | Box Group-Screed Control; -Electronic | 1 |
| 29***35 | Crown Group-Power | 1 |
356-8831 Special Ar-Screed -Folding Endgate
| 29***23 | Cylinder Block Group-Short | 1 |
| 29***85 | Cylinder Block Group | 1 |
| 29***86 | Crankshaft Group | 1 |
Operator Station
330-9923 Canopy Gp
| 13***20 | Shaft | 2 |
| 13***77 | Lockout | 2 |
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
327-5324 Console Gp-Operator
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 19***19 | Roller | 4 |
| 19***20 | Shaft | 2 |
347-1976 Control Gp-Steering
| 30***87 | Bar-Ballast | 1 |
| 34***76 | Control Group-Steering | 1 |
| 35***40 | Plate | 4 |
347-1851 Control Gp-Steering
| 34***51 | Control Group-Steering | 1 |
| 35***40 | Plate | 2 |
| 7X***75 | Bolt-Plt; (M16 X 2.0 X 130) | 4 |
347-1972 Control Gp-Steering
| 34***72 | Control Group-Steering | 1 |
| 35***40 | Plate | 4 |
| 7X***75 | Bolt-Plt; (M16 X 2.0 X 130) | 4 |
343-7125 Control Gp-Steering
| 30***87 | Bar-Ballast | 1 |
| 34***25 | Control Group-Steering | 1 |
| 35***40 | Plate | 2 |
284-8905 Control Gp-Unprgmed Monitor -Advisor
| 28***05 | Control Group-Unprgmed Monitor; -Advisor | 1 |
| 35***40 | Plate | 4 |
| 35***99 | Plate | 2 |
274-8748 Control Gp-Unprgmed Monitor -Advisor
| 27***48 | Control Group-Unprgmed Monitor; -Advisor | 1 |
| 30***87 | Bar-Ballast | 1 |
| 35***40 | Plate | 4 |
330-6558 Display Gp-Monitor
| 1A***68 | Nut | 1 |
| 31***02 | Plate As | 1 |
| 31***03 | Tube As | 1 |
348-3782 Display Gp-Monitor
| 1A***68 | Nut | 1 |
| 31***02 | Plate As | 1 |
| 34***82 | Display Group-Monitor; -Accugrade | 1 |
330-6089 Display Gp-Monitor -Unprogrammed
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
| 1A***68 | Nut | 2 |
327-5718 Floor Mat Gp
| 22***51 | Bracket | 1 |
| 32***18 | Floor Mat Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
321-2435 Guard Gp-Vandalism
| 13***49 | Cable As | 2 |
| 31***59 | Plate | 2 |
| 31***60 | Flashing | 2 |
250-2297 Meter Gp-Service -White Backlight
| 12***73 | Extension As | 2 |
| 12***20 | Shim; (1.65-mm Thk) | 8 |
| 24***82 | Plate | 2 |
321-2421 Operator Ar
| 16***39 | Bolt; (5/8-11x3.5-In) | 6 |
| 18***25 | Scraper; (Brass) | 6 |
| 19***57 | Scraper As | 6 |
327-5332 Panel Gp-Control -Lh
| 10***16 | Cover-Work Light | 2 |
| 13***82 | Arm-Mirror | 2 |
| 13***83 | Mirror-Convex | 2 |
327-5333 Panel Gp-Control -Rh
| 10***49 | Reflector-Yellow | 8 |
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 13***82 | Arm-Mirror | 2 |
261-7148 Pedal Gp-Governor -Electronic
| 09***22 | Ring-Retaining | 4 |
| 26***48 | Pedal Group-Governor; -Electronic | 1 |
| 31***16 | Plate Group-Screed; -Rh | 1 |
315-3700 Platform Gp-Operator -Slide
| 09***85 | Locknut; (M16x2-Thd) | 8 |
| 15***49 | Screw-Flat Head; (M10x1.5x25-mm) | 28 |
| 19***84 | Locknut; (M10x1.5-Thd) | 28 |
295-3087 Platform Gp-Operator
| 09***22 | Ring-Retaining | 4 |
| 11***33 | Washer; (11x50x6-mm Thk) | 8 |
| 25***67 | Nut; (M20x1.5-Thd) | 4 |
332-8951 Platform Gp-Operator -Lh
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
276-4588 Platform Gp-Operator
| 27***43 | Cover | 2 |
| 27***88 | Platform Group-Operator | 1 |
| 9X***42 | Screw-Truss Head (M6x1.0x12mm); (M6x1.00x12mm) | 6 |
286-3618 Platform Gp-Operator
| 09***49 | Bolt; (M8x1.25x40-mm) | 14 |
| 13***40 | Locknut; (M8x1.25-Thd) | 6 |
| 23***06 | Bumper | 1 |
350-5949 Platform Gp-Operator
332-8950 Platform Gp-Operator -Rh
| 10***31 | Nut-Spring | 8 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 8 |
| 12***80 | Locknut; (M12x1.75-Thd) | 18 |
235-3151 Seat Gp-Suspension -Vinyl
199-4298 Seat Gp-Suspension -Vinyl
106-8541 Umbrella Gp
187-6649 Umbrella Gp
Power Train
297-8145 Drive Gp-Final
352-2524 Drive Gp-Hydrostatic
323-8176 Hydraulic Ar-Propel
323-8184 Lines Gp-Propel
| 32***87 | Frame As | 1 |
| 32***84 | Lines Group-Propel | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 6 |
356-6905 Solenoid Gp-Proportional
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
Service Equipment And Supplies
7r-4741 Lines Gp-Spray Down
| 7R***41 | Lines Group-Spray Down | 1 |
278-0358 Lines Gp-Spray Down
| 27***58 | Lines Group-Spray Down | 1 |
276-4609 Plate & Film Gp
| 27***09 | Plate & Film Group | 1 |
321-2441 Plate & Film Gp -U.S.
| 32***41 | Plate & Film Group; -U.S. | 1 |
295-3081 Plate & Film Gp
| 29***81 | Plate & Film Group | 1 |
321-2442 Plate & Film Gp -International
| 32***42 | Plate & Film Group; -International | 1 |
351-0902 Plate & Film Gp
| 35***02 | Plate & Film Group | 1 |
340-4328 Plate & Film Gp -International
| 34***28 | Plate & Film Group; -International | 1 |
333-2710 Plate & Film Gp -U.S.
| 33***10 | Plate & Film Group; -U.S. | 1 |
309-1496 Plate & Film Gp
| 30***96 | Plate & Film Group | 1 |
286-3619 Plate & Film Gp
| 28***19 | Plate & Film Group | 1 |
266-4529 Pump & Motor Gp-Washdown -Water-Emulsion-Diesel Fuel
| 26***29 | Pump & Motor Group-Washdown; -Water-Emulsion-Diesel Fuel | 1 |
278-0357 Reel Gp-Washdown Hose
| 27***57 | Reel Group-Washdown Hose | 1 |
321-2467 Washdown Gp -Diesel Fuel
| 32***67 | Washdown Group; -Diesel Fuel | 1 |
330-5957 Washdown Gp-Ecology
| 33***57 | Washdown Group-Ecology | 1 |
Slope And Grade Control
333-1224 Beam Gp-Transverse
| 33***24 | Beam Group-Transverse | 1 |
298-0648 Cable Gp-Control
| 29***48 | Cable Group-Control | 1 |
298-0647 Cable Gp-Control
| 29***47 | Cable Group-Control | 1 |
330-6083 Control Gp-Grade & Slope -Accugrade
| 33***83 | Control Group-Grade & Slope; -Accugrade | 1 |
279-2461 Control Gp-Grade & Slope
| 27***61 | Control Group-Grade & Slope | 1 |
337-9988 Control Gp-Grade & Slope -Accugrade
| 33***88 | Control Group-Grade & Slope; -Accugrade | 1 |
298-0645 Control Gp-Grade & Slope
| 29***45 | Control Group-Grade & Slope | 1 |
207-8265 Control Gp-Grade & Slope
| 20***65 | Control Group-Grade & Slope | 1 |
209-3130 Control Gp-Grade & Slope
| 20***30 | Control Group-Grade & Slope | 1 |
357-8491 Sensor Gp-Grade
| 35***91 | Sensor Group-Grade | 1 |
298-0642 Sensor Gp-Grade
| 29***42 | Sensor Group-Grade | 1 |
348-3783 Sensor Gp-Sonic
| 34***83 | Sensor Group-Sonic | 1 |
282-8520 Sensor Gp-Sonic
| 28***20 | Sensor Group-Sonic | 1 |
330-6084 Sensor Gp-Sonic
| 33***84 | Sensor Group-Sonic | 1 |
258-6580 Sensor Gp-Sonic -Averaging Ski
| 25***80 | Sensor Group-Sonic; -Averaging Ski | 1 |
257-6255 Ski Gp-Averaging
| 25***55 | Ski Group-Averaging | 1 |
Undercarriage
187-3073 Bogie Gp
| 10***04 | Tube; (1.1-M) | 1 |
| 10***34 | Tube As | 1 |
| 10***49 | Collar | 2 |
297-8144 Frame Gp-Track Roller -Rh
| 28***78 | Connector | 1 |
| 28***79 | Connector As | 1 |
| 29***79 | Rod-Threaded | 2 |
299-0578 Frame Gp-Track Roller -Rh
| 18***68 | Plate-Serial Number | 1 |
| 1P***07 | Film-Symbol; 2 On Bottom Of Upper Frame Below Engine. 2 On Front Of Upper Frame Above Boom Articulation | 2 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
299-0575 Frame Gp-Track Roller -Lh
| 10***14 | Handle | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***68 | Plate-Serial Number | 1 |
297-8143 Frame Gp-Track Roller -Lh
| 08***77 | Adapter | 1 |
| 1G***70 | Extension-Curve | 1 |
| 1G***79 | Hose As | 1 |
193-2438 Roller Gp-Track
| 15***79 | Film-Instruction; (Grease)(Instructions) | 8 |
| 16***89 | Tack-Fastener | 4 |
| 18***68 | Plate-Serial Number | 1 |
188-0535 Tensioner Gp-Track -Idler Hub
| 18***35 | Tensioner Group-Track; -Idler Hub | 1 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
| 29***22 | Film-Danger; (Shock, Electrocution Hazard) | 7 |
321-2429 Track Gp
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
321-2443 Track Gp
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
297-8141 Undercarriage Ar
| 11***73 | Film-Stripe; (450-cm Each) | 0 |
| 11***75 | Film-Identification; (Barber-Greene)(Barber-Greene) | 3 |
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
BG555E serial number reference
The PIN/serial plate is a riveted metal tag on the machine frame, on Cat track pavers typically found on the right side of the tractor frame near the engine compartment or under the operator's platform. Read the 17-character PIN left to right; the serial number is the last 8 characters, made up of the 3-letter prefix (identifies model/build) followed by a 5-6 digit sequence number unique to that unit.
| Prefix | Identifies | Notes |
|---|---|---|
| B5P | BG555E track asphalt paver, all built configurations | Range B5P00001-UP. Powered by the C4.4 engine. This is the sole serial prefix tied to the BG555E in factory parts catalog data; no separate letter-suffix generation (BG555E2, BG555F, etc.) is documented for this badge. Not to be confused with AP555E (screed-equipped badge-twin on the same C4.4 chassis), which carries its own A5D prefix in the same combined parts manual - engine and driveline data legitimately overlaps but keep the two prefixes scoped to their own badge. |
Frequently asked questions
What engine powers the Cat BG555E?
A Cat C4.4 ACERT four-cylinder turbocharged diesel rated 106 kW (142 hp SAE), meeting Tier 3/Stage IIIA emissions - the same engine used in the badge-twin AP555E on the shared tractor platform.
What is the BG555E's operating weight?
Roughly 12,590-17,710 kg (27,760-39,050 lb); the exact figure varies by configuration, screed model and hydraulic-extension equipment fitted.
What replaced the Cat BG555E?
Caterpillar succeeded the E-series with the Tier 4 Final AP555F/AP500F generation, introduced in the mid-2010s, which added roughly 110 kW (148 hp) and a quick-heating electric screed in place of the earlier fuel-fired burner heater.
What BG555E owners discuss
What powertrain behavior do owners and mechanics flag most on the BG555E's C4.4 ACERT engine?
Reported quirks center on intermittent rough idle and unstable fuel rail pressure with no fault code set, usually traced to a weak lift pump or a fuel pressure sensor drifting out of calibration rather than the injectors themselves. A restriction or small leak on the high-pressure common rail side produces the same rough-idle symptom, so pressure testing is the recommended first step before parts get swapped. A separate reported fault is a no-start condition that mimics a dead engine but is actually a blown ECM fuse. Have your dealer verify fuel rail pressure and ECM fuse continuity before condemning the injection system.
What undercarriage wear pattern is typical for the BG555E's Mobil-trac chassis?
The BG555E runs Cat's rubber Mobil-trac undercarriage rather than steel track or wheels, and the consensus wear items are the rubber pads and bogie wheels, not the drivetrain. Asphalt left to cure on the pads overnight accelerates cracking and pad separation, so daily scraping and washdown before it hardens is treated as routine, not optional. Track tension on a daily-use machine needs checking more often than the long factory interval implies. Keep fuel, solvents, and standing puddles of hydraulic oil off the rubber, they shorten compound life noticeably faster than normal wear.
Is there a known C4.4 ACERT sensor fault that causes a crank-no-start on this engine series?
A recurring complaint on this engine series is the crankshaft reluctor ring's retaining screws working loose with running hours. Once a screw backs out, the two engine speed signals reaching the ECM disagree, and the ECM withholds fuel injection entirely, so the engine cranks but never catches. Techs say to check reluctor ring integrity and speed sensor wiring before chasing an ECM or injector problem on a sudden no-start. Have your dealer verify engine speed sensor correlation before replacing electronic components.
What electrical or sensor issues come up most in the field on this paver?
The most common electrical complaint is corrosion or loosened terminals at the screed heating element connections, causing uneven heat or a dead heat zone, often traced back to moisture working into the heater terminal housing over a season of exposure. On the feed side, material sensor wiring gets stretched or pinched where it routes between the tow arm and tractor frame, and buildup on the sensor face throws off height readings if it isn't wiped down at shift end. Have your dealer verify heater circuit wiring and insulation, this runs at higher voltage and current than a routine low-voltage splice.
What wear parts take the most abuse on the feeder and auger system?
Floor plates, auger flights, and conveyor chains absorb the worst abrasive wear on this class of paver: floor plates warp under heat and load, auger flights wear from square edges down to a point, and conveyor chains start to sag as pins and bushings wear. Mechanics check auger bearing condition by hand, grabbing the shaft to feel for play, since any movement means a bearing needs replacing before the shaft comes loose entirely. This wear pattern is considered universal across tracked and wheeled asphalt pavers in this size class rather than specific to this model, so it should be budgeted for on any used unit with real working hours.
What hydraulic behavior should an owner expect over time on the BG555E?
The most common hydraulic complaint reported by techs servicing pavers this size is seepage or leaks at propel pump and motor fittings as seals age and harden, more a function of hours and heat cycling than a design flaw. Pavers in general are built tight enough that reaching some fittings for a repair means real disassembly, which shows up in shop-time complaints. On any propel sluggishness or drift complaint, the standard troubleshooting order is to check charge pressure and control linkage adjustment before condemning a pump as worn out. Have your dealer verify hydraulic pump and charge pressures against spec before authorizing a pump rebuild or replacement.
What should a buyer check when looking at a used BG555E?
Experienced buyers start with a walk-around for abuse clues: cracked or missing panels, torn seats, and rough-handled controls often track with poor maintenance history. Pull the engine dipstick and look for coolant contamination in the oil, a sign of a head gasket problem, and check hoses at their fittings for dryness or bulging. Measure screed thickness at all four corners; uneven wear side to side means the machine has been running out of alignment. Check auger and conveyor chain play by hand for looseness or sag, and inspect the rubber Mobil-trac pads and bogies closely since undercarriage replacement is a major cost item. Finally, cycle every function under power, propel, screed heat, augers, conveyors, hopper, before agreeing on a price, and have your dealer verify hour meter accuracy and pull any stored fault history the ECM retains.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific BG555E part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.