Caterpillarasphalt paver
Caterpillar BG500E
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar BG500E is a mid-range asphalt paver, introduced in 2011 as part of Caterpillar's revamped E-series paving line alongside the AP500E, AP555E, and BG555E. It runs a Cat C4.4 ACERT four-cylinder turbocharged diesel rated at 106 kW (142 hp, 144 metric hp), built to U.S. EPA Tier 3 / EU Stage IIIA emissions. Operating weight runs roughly 15.3 to 16.1 tonnes (about 33,700 to 35,600 lb) depending on the screed fitted: the vibratory AS2252C, the wider rear-extender AS3251C, or the tamper-bar AS4252C, each taking bolt-on or hydraulic extensions for wider mats. No confirmed direct predecessor model is documented under the BG500E badge; it was succeeded by a Tier 4 Final/Stage V generation marketed under the bare AP500/BG500 name, a higher-output C4.4 paired with the newer SE47-series screeds, later joined by the AP500F with quick-heating electric screed technology. Undercarriage configuration for this exact badge is not settled by available documentation; confirm wheel or track configuration off the data plate before ordering undercarriage-specific parts.
The E-series update brought more screed choices, a fumes-management system that draws exhaust away from both the paver and screed operators, and independent hydraulic circuits for the auger and conveyor sides so mix delivery can be metered separately left to right. The Tier 4 Final/Stage V generation that followed added exhaust aftertreatment and a DEF system alongside its higher-output engine, a real jump in service complexity over this Tier 3 machine. In the used and parts market, BG500E units stay attractive because the simpler Tier 3-era engine has no DEF system or aftertreatment to service, and parts commonality with the AP500E, AP555E, and BG555E siblings, same engine family, similar screed and hydraulic components, keeps replacement parts easier to source than a single-badge orphan model. Thin public documentation under the BG500E badge specifically is normal for this family and not a sign of a rare or troubled machine; it shares its driveline and catalog family with better-documented siblings.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar BG500E specifications
Engine
| Engine model | Cat C4.4 with ACERT Technology, 4-cylinder turbocharged diesel, common rail fuel system |
| Gross power | 106 kW (142 hp imperial, 144 hp metric) |
| Displacement | 4.4 L (269 in3) |
| Cylinders | 4 |
| Emissions tier | U.S. EPA Tier 3 / EU Stage IIIA |
| Oil change interval | 500 hours |
| Note on engine identity | BG500E is documented in the same operator/parts document group as the wheel-undercarriage AP500E and shares its C4.4 ACERT engine rating. A separate aftermarket starter-motor cross-reference groups BG500E with the older BG225C/BG230D models on a mechanical 3054C 4.4L engine; this looks like a generic parts-compatibility bundling rather than a second confirmed engine for BG500E, so treat the C4.4 ACERT rating as the primary figure and the 3054C reference as unconfirmed. |
Weights
| Tractor only | 12 590 kg (27,760 lb) |
| Tractor with hard-top canopy | 12 945 kg (28,539 lb) |
| Operating weight w/vibratory screed (narrow front-extender type) | 15 290 kg (33,715 lb) |
| Operating weight w/vibratory screed (rear-extender type) | 15 520 kg (34,220 lb) |
| Operating weight w/tamper-bar screed (with canopy) | 16 145 kg (35,594 lb) |
| Data source note | Figures come from the shared paver platform this model is cataloged under; a standalone BG500E factory weight table was not located, so treat these as representative of the platform pending data-plate/dealer confirmation for a specific unit. |
Dimensions
| Tractor length w/push roller | 4.38 m (14 ft 4 in) |
| Length w/push roller and narrow vibratory screed, walkway up | 5.46 m (17 ft 11 in) |
| Length w/push roller and narrow vibratory screed, walkway down | 5.80 m (19 ft) |
| Length w/push roller and rear-extender vibratory screed | 6.11 m (20 ft) |
| Length w/push roller and tamper-bar screed | 5.75 m (18 ft 10 in) |
| Wheel gauge width (outside to outside) | 2.49 m (8 ft 2 in) |
| Transport width with screed end gates (hopper raised) | 2.72 m (8 ft 11 in) |
| Transport width without screed end gates (hopper raised) | 2.50 m (8 ft 2 in) |
| Tractor operating width (hopper lowered) | 3.31 m (10 ft 10 in) |
| Operating height | 3.84 m (12 ft 7 in) |
| Transport height (fumes stack and seat lowered) | 2.82 m (9 ft 3 in) |
| Truck entry height (apron) | 545 mm (21 in) |
| Truck entry width | 3.20 m (10 ft 6 in) |
| Hopper length | 1.96 m (6 ft 5 in) |
| Deck height | 1.78 m (5 ft 10 in) |
| Undercarriage configuration | Not independently confirmed by a standalone BG500E spec sheet. The model number pairing pattern within this paver family (the 500-class number carries a wheel undercarriage, the 555-class number carries a track/Mobil-trac undercarriage) points to BG500E being wheel-mounted, matching its 500-class sibling. Confirm undercarriage type against the data plate for a specific unit. |
Performance
| Paving speed | 61 mpm (200 fpm) |
| Paving speed with tamper-bar screed | 25 mpm (82 fpm) |
| Travel speed | 0-16 km/h (0-10 mph) |
| Inside turning radius (maneuver mode) | 0.75 m (2.5 ft) |
| Max paving depth | 305 mm (12 in) |
| Max paving width, narrow vibratory screed | 1.88-5.60 m (6 ft 2 in-18 ft 5 in), standard range with bolt-on extensions |
| Max paving width, rear-extender vibratory screed | 1.83-6.15 m (6 ft-20 ft 2 in) |
| Max paving width, tamper-bar screed | 2.55-7.00 m (8 ft 2 in-23 ft) |
| Max material throughput | 1087 tonnes/h (1,198 tons/h) |
| Hopper capacity | 6.2 m3 (219 ft3), includes tunnels |
| Drive options | Front wheel assist or all-wheel drive optional for added traction pushing trucks or working on soft base |
Service capacities (summary)
| Fuel tank | 189 L (50 gal) |
| Electrical system | 24V, 75A alternator |
| Screed heat generator | 25 kW tractor-mounted generator (engine speed 1275 rpm or higher); 7 kW auxiliary power available |
| Hydraulic system | Not published in the platform literature reviewed; confirm capacity with your Cat dealer before service |
| Engine oil | Not confirmed for this paver installation specifically; the C4.4 engine family generally lists a refill capacity near 11 L (11.6 qt), sump-dependent |
| Cooling system | Not confirmed for this paver installation specifically; C4.4 engine data generally shows a range near 7-11 L (7.4-11.4 qt) depending on configuration |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
BG500E fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | Not confirmed for this Tier 3 configuration in available documentation — verify with OMM or dealer (Cat lists a 500-hour oil change interval for this C4.4 engine) | Cat DEO or DEO-ULS diesel engine oil. SAE 15W-40 for normal ambient range; SAE 10W-30 down to about -18C (0F); full-synthetic Cat DEO Cold Weather or DEO-SYN 5W-40 for sub-zero climates. Match viscosity grade to expected ambient temperature per the OMM cold-weather chart. |
| Cooling system | Not confirmed for this Tier 3 configuration in available documentation — verify with OMM or dealer | Cat ELC (Extended Life Coolant) or Cat DEAC (Diesel Engine Antifreeze/Coolant), 50:50 water/glycol premix. Do not top off ELC with conventional coolant; this shortens the extended service life. |
| Fuel tank | 189 L (50 gal) | Ultra-low sulfur diesel (ULSD) meeting Cat fuel specifications; biodiesel blends up to B20 are acceptable per Cat guidance for this engine generation. |
| Transmission / powertrain | Not applicable — propulsion is hydrostatic. Wheel and Mobil-Trac (track) drive motors are powered directly off the machine hydraulic system; there is no separate mechanical transmission fluid compartment. | See hydraulic system entry. |
| Final drives (wheel bogies / track drive motors) | Not applicable / not separately documented — drive is via hydraulic motors at each bogie/wheel station, not a geared final drive with its own oil sump. | See hydraulic system entry. |
| Hydraulic system and tank | Not confirmed for this Tier 3 BG500E/AP500E-family configuration in available sources. A commonly cited 121 L (32 gal) figure traces to the later Tier 4 Final bare-badge AP500/AP555 reissue (which also carries a DEF tank) and should not be assumed for this Tier 3 machine — verify tank capacity against the OMM or the machine's sight gauge. | Cat HYDO Advanced hydraulic oil (10W or 30 grade by climate); Cat Bio HYDO Advanced biodegradable hydraulic oil is also offered as an option on this paver family. |
| Axles / differentials | Not applicable — no mechanical differential; wheel/track propulsion is hydrostatic (hydraulic drive motors), confirmed by the machine's own literature. | Not applicable. |
| Grease (chassis pins, bushings, bearings) | Spec only — no fill volume applies | Cat Advanced 3Moly Grease (lithium-complex, 3% moly) for normal chassis, pin, and bushing points across -20C to 40C (-4F to 104F) ambient. Cat Multipurpose Grease is an acceptable lighter-duty alternative where extreme-pressure protection is not required. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar BG500E maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the BG500E beyond the schedule
Predictive Maintenance & Fluid Analysis
Run scheduled S.O.S oil sampling on the C4.4 ACERT to catch bearing and ring wear before it forces a rebuild, and sample hydraulic oil at the same interval since the auger and conveyor each run their own pump circuit under continuous paving load. Track coolant condition rather than blind-changing it. Watch screed heat sensor readings on the AS2252C, AS3251C, and AS4252C screeds; the heating logic holds the last known reading if one sensor drops out, so a single cold zone usually means one failed sensor, not a harness-wide fault.
Corrective & Common Repairs
Expect the engine speed sensor to be the most common ACERT-generation nuisance fault, alongside hard starting and white smoke when the fuel lift pump weakens or loses prime. Milky oil or vanishing coolant points to the oil cooler core or head gasket; pressure-test the cooler before condemning the head. Screed plate wears fastest; measure all four corners, since uneven thickness usually means alignment wear from heavy-nose operation, not just normal wear. A one-sided feed slowdown traces to a single weak auger or conveyor pump, not the whole hydraulic system.
Overhaul & Rebuild Points
High-hour BG500E units typically need auger and conveyor gearbox and pump rebuilds first, since the independent per-side feed circuits take the most continuous load in the paver. Screed extension slides, wear plates, and tamper bar bushings need periodic renewal to hold crown and cross-slope accuracy on the AS4252C. Whichever undercarriage a given unit carries, propel-side bearings, drive motors, and bogie or track components wear next; judge these off the data plate configuration, not assumption. The C4.4 ACERT stays low-maintenance at this displacement; valve and injector work is the usual top-end job.
Seasonal & Environment Servicing
Cold-weather startups on the C4.4 ACERT need block-heater use and a coolant freeze-point check; confirm hydraulic oil is rated for ambient temperature so the auger, conveyor, and propel circuits are not starved on a cold, thick fill. In hot climates, clean the radiator and hydraulic cooler of baked-on asphalt dust often; restricted airflow is the top cause of overheating on paving crews. Wash cured mix from the hopper, augers, conveyor tunnel, and screed plates every shift with the onboard release-agent washdown tank, since overnight buildup is far harder to remove and accelerates wear.
BG500E common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 299-8229 | Filter-Fuel | Fuel system service | Check fitment → |
| 343-7104 | Filter As-Fuel | Fuel system service | Check fitment → |
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 311-1110 | Filter As-Fuel | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
BG500E fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| MID 036 - CID 0110 - FMI 03 | Engine Coolant Temperature Sensor: voltage above normal range | Open circuit or short to a higher-voltage supply on the coolant temperature sensor wiring | Check sensor connector and harness for corrosion or an open circuit, then verify sensor resistance against spec before replacing |
| MID 036 - CID 0110 - FMI 04 | Engine Coolant Temperature Sensor: voltage below normal range | Short to ground on the sensor signal wire or a failed sensor | Inspect harness for chafing/grounding, disconnect and test sensor resistance, replace sensor if out of spec |
| MID 036 - CID 0100 - FMI 03 | Engine Oil Pressure Sensor: voltage above normal range | Open circuit or short to a higher-voltage supply on the oil pressure sensor circuit | Check sensor wiring and connector for damage, confirm supply voltage, replace sensor if circuit tests good but reading stays abnormal |
| MID 036 - CID 0100 - FMI 04 | Engine Oil Pressure Sensor: voltage below normal range, often paired with a low oil pressure warning | Short to ground on the sensor circuit, or genuinely low oil pressure from level/pump/filter issues | Stop and check oil level and filter condition first, then test sensor wiring; do not run the engine on a confirmed low-pressure condition |
| MID 036 - CID 0102 - FMI 03 | Boost Pressure Sensor: voltage above normal range | Open circuit or chafed harness on the intake manifold boost pressure sensor | Inspect sensor connector and wiring, test supply voltage, replace sensor if wiring checks out |
| MID 036 - CID 0094 - FMI 04 | Fuel Delivery Pressure Sensor: voltage below normal range | Short to ground on the fuel pressure sensor circuit or a failed sensor | Check wiring harness for damage near the fuel filter housing, test sensor resistance, replace sensor if faulty |
| MID 036 - CID 0111 - FMI 01 | Engine Coolant Level Sensor: data valid but below normal operating range | Low coolant level in the recovery bottle or a failed level sensor float | Check coolant level and top off, inspect for external leaks, then verify sensor operation if level is correct and code persists |
| MID 036 - CID 0172 - FMI 03 | Intake Manifold Air Temperature Sensor: voltage above normal range | Open circuit or short to supply on the intake air temperature sensor wiring | Inspect connector and harness routing near the intake manifold, test sensor resistance, replace if out of spec |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
BG500E attachments & work tools
AS2252C narrow front-mount screed
Vibratory screed with front-mounted hydraulic extenders using 229 mm (9") wide extender plates against a 457 mm (18") main plate. Built for commercial-width jobs where quick width changes with minimal handwork matter. Power berm forms a 305 mm (12") or 457 mm (18") wide berm with hydraulically adjustable end-berm height up to 152 mm (6").
AS3251C rear-mount Extend-A-Mat screed
Vibratory screed with hydraulically driven, rear-mounted extenders on heavy-duty support tubes that resist frame flex under wide-width paving. Main and extender screed plates are 457 mm (18") wide (front to back). Suited to highway and wider commercial work versus the narrower AS2252C.
AS4252C high-output tamper/vibratory screed
Double-width extenders, variable-frequency tamper bar plus vibratory plate compaction, and electric heat on tamper bars, screed plates, and optional end gates. Main and extender plates run 330 mm (13") wide. Standard extendable range is about 2.5-5.0 m (8'4"-16'4"); with extensions the wheeled paver reaches roughly 7.0 m (23'), a track-mounted sibling in the same paver line is cited wider still - treat max widths as varying by configuration/series.
Screed wear plates
Screed plates are modular, roughly 300 mm (12") sections that can be swapped across the screed width to even out wear rather than replacing the full plate.
Grade and slope control
Factory-offered option using elevation and cross-slope sensors (sonic/ski style) that can run independently or paired for automatic mat-thickness and profile control. Treat as an add-on kit rather than standard equipment.
Operator environment package
Standard and optional operator items include a canopy, tractor and screed umbrellas, heated seat, dual sliding operator consoles, a deceleration pedal, and a steering guide. These are factory configuration choices, not aftermarket attachments.
Washdown / ecology system
Onboard spray tank of about 32 L (8.5 gal) for release agent, with single-touch activation from the main operator display alongside screed heat, vibratory, and ventilation controls.
Ventilation / fume extraction
Factory ventilation system draws fumes away from both the conveyor tunnel and the auger chamber, keeping tractor and screed operators clear of exhaust and asphalt fumes.
Feeder system (auger/conveyor)
Independent auger and conveyor controls feed the screed through 355 mm (14") diameter feed screws, paired with hopper wings sized to reduce material segregation at the hopper.
Screed mounting / coupler arrangement
Screeds attach to the tractor through a fixed, pinned tow-arm and frame-extension connection rather than a quick-coupler plate as used on earthmoving attachments. Width, crown, and extender-height functions are powered from the tractor's own hydraulic circuit; electric-heat screeds additionally draw off a tractor-mounted generator rather than needing a separate hydraulic kit.
All BG500E assemblies by section
Every catalogued assembly group for the Caterpillar BG500E. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
328-5455 Air Cleaner Gp
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 1P***86 | Adapter | 1 |
| 27***57 | Air Cleaner Group | 1 |
270-8357 Air Cleaner Gp
| 21***81 | Cover As | 1 |
| 22***63 | Valve As-Air | 1 |
| 25***02 | Filter Element As-Air; (Primary) | 1 |
323-5667 Exhaust Gp-Flexible
| 13***99 | Clamp As | 1 |
| 17***92 | Lanyard | 2 |
| 28***75 | Cover | 1 |
333-4788 Manifold Gp-Inlet
| 11***79 | Gasket | 2 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 8 |
| 18***27 | Plate | 2 |
305-2168 Mounting Gp-Exhaust
| 30***68 | Mounting Group-Exhaust | 1 |
| 6I***63 | Nut; (M10x1.15-Thd) | 3 |
| 6I***12 | Stud | 3 |
333-4785 Turbocharger Gp
| 03***47 | Ferrule | 3 |
| 03***91 | Nut | 2 |
| 03***14 | Nut; (7/16-In) | 1 |
Basic Engine
298-5090 Camshaft Gp
| 1B***36 | Key-Woodruff | 1 |
| 27***26 | Rod-Push | 8 |
| 29***90 | Camshaft Group | 1 |
298-5111 Cover Gp-Engine
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 21***03 | Washer; (Sealing) | 1 |
323-6222 Cover Gp-Valve Mechanism
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 13***08 | Cap As; (Engine Oil Filler) | 1 |
| 16***65 | Spring; (Crankcase Breather Hose) | 1 |
330-1736 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 0 |
298-5086 Crankshaft Gp
| 27***94 | Bolt | 3 |
| 29***86 | Crankshaft Group | 1 |
| 33***36 | Crankshaft Group | 1 |
330-4789 Cylinder Block Gp
| 03***63 | Plug | 1 |
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 06***02 | Dowel | 10 |
298-5085 Cylinder Block Gp
| 20***19 | Bolt; (M8x1.25x16-mm) | 10 |
| 23***49 | Housing As | 1 |
| 29***85 | Cylinder Block Group | 1 |
298-4526 Cylinder Head As
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 27***16 | Plug-Core | 4 |
298-5088 Cylinder Head Gp
| 22***01 | Bolt; (M15x1.5x137-mm) | 10 |
| 29***26 | Cylinder Head As | 1 |
| 29***88 | Cylinder Head Group | 1 |
328-5480 Drain Gp-Engine Oil
| 10***97 | Valve-Ball | 1 |
| 14***42 | Connector Group | 2 |
| 14***11 | Plug Group | 1 |
323-9874 Drive Gp-Fan
| 11***59 | Bolt; (M10x1.5x35-mm) | 5 |
| 26***28 | Pulley As-Idler | 1 |
| 26***20 | Pulley | 1 |
344-4714 Drive Gp-Fan
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 28***26 | Pulley | 1 |
| 28***27 | Belt-Serpentine | 1 |
306-2314 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 10 |
| 10***31 | Flywheel As | 1 |
298-5110 Gear Gp-Front
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
299-5057 Housing Gp-Flywheel
| 10***57 | Plate | 1 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 14***76 | Housing-Flywheel | 1 |
299-5033 Lifting Gp-Engine
| 29***24 | Bracket | 1 |
| 29***26 | Bracket | 1 |
| 29***33 | Lifting Group-Engine | 1 |
333-4789 Mounting Gp-Engine
| 13***07 | Bracket | 1 |
| 14***81 | Spacer | 1 |
| 18***43 | Stud | 4 |
323-4650 Mounting Gp-Engine Flexible
| 12***28 | Spacer; (11x20x10-mm Thk) | 1 |
| 30***08 | Guard As-Belt | 1 |
| 30***25 | Mount As | 1 |
299-5082 Mounting Gp-Fan
| 17***71 | Bolt; (M8x1.25x20-mm) | 4 |
| 29***82 | Mounting Group-Fan | 1 |
322-8424 Pan Gp-Oil
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 4 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
298-5087 Piston & Rod Gp
| 12***36 | Ring-Retaining | 2 |
| 22***38 | Bushing | 1 |
| 22***39 | Bolt-Special; (Connecting Rod) | 2 |
298-5129 Plug Gp-Cylinder Head
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 29***29 | Plug Group-Cylinder Head | 1 |
298-5131 Plug Gp-Engine
| 29***31 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
298-5098 Plug Gp-Engine
| 22***22 | Plug-Cup | 1 |
| 29***98 | Plug Group-Engine | 1 |
298-5101 Pulley Gp-Crankshaft
| 10***41 | Bolt; (M12x1.75x25-mm) | 3 |
| 27***31 | Pulley | 1 |
| 29***01 | Pulley Group-Crankshaft | 1 |
298-5089 Rocker Arm Gp
| 29***33 | Rocker Arm Group | 1 |
| 29***89 | Rocker Arm Group | 1 |
| 33***97 | Link | 8 |
298-4533 Rocker Arm Gp
| 27***00 | Plug-Shaft End | 2 |
| 27***01 | Circlip | 1 |
| 27***06 | Spring-Shaft | 3 |
Braking System
193-8539 Pump & Valve Gp-Brake -Manual Release
| 19***39 | Pump & Valve Group-Brake; -Manual Release | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
229-9476 Pump Gp-Hand -Manual Brake Release
| 22***76 | Pump Group-Hand; -Manual Brake Release | 1 |
| 23***43 | Knob | 1 |
| 31***34 | Kit-Seal; (Check Valve) | 1 |
Controls
276-4579 Adjuster Gp-Height
| 10***03 | Adjuster Group-Height; -Manual | 2 |
| 10***04 | Bolt-Shoulder | 2 |
| 10***24 | Tube As; (Vertical) | 4 |
253-4752 Adjuster Gp-Height
| 10***24 | Tube As; (Vertical) | 4 |
| 10***39 | Key-Square | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
102-2703 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 1 |
| 10***47 | Gear-Worm | 1 |
| 10***50 | Guide-Bushing | 1 |
197-9844 Chain Gp-Screed
| 10***87 | Link-Connecting | 1 |
| 19***33 | Link-Offset | 1 |
| 19***44 | Chain Group-Screed | 1 |
287-0326 Control Gp-Thickness -Acme, Cw
| 27***84 | Film-Instruction; (Mat Thickness, Cw To Increase) | 2 |
| 28***26 | Control Group-Thickness; -Lh Thread | 1 |
| 28***26 | Shaft As | 2 |
277-9935 Control Gp-Thickness -Acme, Ccw
| 27***83 | Film-Instruction; (Mat Thickness, Ccw To Increase) | 2 |
| 27***35 | Control Group-Thickness; -Rh Thread | 1 |
| 28***94 | Shaft As | 2 |
287-0327 Control Gp-Thickness -Acme, Ccw
| 27***83 | Film-Instruction; (Mat Thickness, Ccw To Increase) | 2 |
| 28***27 | Control Group-Thickness; -Rh Thread | 1 |
| 28***24 | Shaft As | 2 |
165-4721 Control Gp-Thickness -Acme, Ccw
| 13***22 | Rod-Threaded; (1-5-Acme Thd) | 2 |
| 13***25 | Sleeve As-Adjustment | 2 |
| 16***21 | Control Group-Thickness; -Rh Thread | 1 |
277-9934 Control Gp-Thickness -Acme, Cw
| 27***84 | Film-Instruction; (Mat Thickness, Cw To Increase) | 2 |
| 27***34 | Control Group-Thickness; -Lh Thread | 1 |
| 28***90 | Shaft As | 2 |
253-4739 Control Gp-Thickness -Ccw
| 1J***36 | Pin-Spring; (Spring) | 2 |
| 25***39 | Control Group-Thickness; -Counterclockwise Rotation | 1 |
| 25***63 | Rod-Threaded; (1-8-Acme Thd) | 2 |
165-4720 Control Gp-Thickness -Acme, Cw
| 13***21 | Rod-Threaded; (1-5-Acme Thd, Lh) | 2 |
| 13***24 | Sleeve As-Adjustment | 2 |
| 16***20 | Control Group-Thickness; -Lh Thread | 1 |
253-4738 Control Gp-Thickness -Acme, Cw
| 1J***36 | Pin-Spring; (Spring) | 2 |
| 25***38 | Control Group-Thickness; -Lh Thread | 1 |
| 25***56 | Sleeve As-Adjustment; (Lh Thread) | 2 |
276-4590 Crown Gp-Power
| 10***01 | .. Roller, Bearing | 2 |
| 10***38 | Pointer | 1 |
| 10***39 | Key-Square | 1 |
290-1628 Crown Gp-Power
| 10***39 | Key-Square | 1 |
| 11***50 | Sprocket; (12-Teeth) | 1 |
| 18***45 | Boss; (12.7x25.4x15.7-mm Thk) | 2 |
196-2503 Jack Gp-Height Adjuster
| 10***64 | Bearing-Thrust | 2 |
| 11***49 | Worm | 1 |
| 19***03 | Jack Group-Height Adjuster | 1 |
102-2699 Jack Gp-Sloper
| 10***99 | Jack Group-Sloper | 1 |
| 10***46 | Gear-Worm | 1 |
| 10***49 | Guide-Bushing | 1 |
277-2004 Motor Gp-Power Adjuster
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
277-2005 Motor Gp-Power Adjuster
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
277-2006 Motor Gp-Power Adjuster
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
197-9850 Shaft Gp-Drive -Front
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***12 | Spindle As | 1 |
282-7961 Shaft Gp-Drive -Non-Actuated
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 28***61 | Shaft Group-Drive; -Non-Actuated | 1 |
197-9849 Shaft Gp-Drive -Rear
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***45 | Spindle As | 1 |
276-4573 Sloper Gp-Power
| 06***93 | Lockwasher-Bearing | 2 |
| 10***99 | Jack Group-Sloper | 2 |
| 10***00 | . Axle, Rod End | 2 |
Cooling System
299-5078 Connection Gp-Water
| 10***87 | Bolt; (M10x1.5x85-mm) | 1 |
| 12***99 | Bolt; (M10x1.5x40-mm) | 1 |
| 28***44 | Gasket-Water Regulator; (Temperature) | 1 |
353-7717 Cooler Gp-Engine Oil
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 35***14 | Cooler-Oil | 1 |
| 35***15 | Gasket | 1 |
333-4784 Cooler Gp-Engine Oil
| 22***44 | Gasket; (Engine Oil Filter Base) | 2 |
| 23***51 | Plate; (Blanking) | 1 |
| 24***60 | Head As | 1 |
298-5105 Pump Gp-Water
| 11***29 | Bolt; (M8x1.25x75-mm) | 7 |
| 22***38 | Seal-O-Ring | 1 |
| 22***19 | Gasket | 1 |
323-6980 Radiator & Hyd Oil Cooler Gp
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 00***64 | End; (Hose) | 1 |
| 00***70 | Tee-Pipe | 1 |
Electrical And Starting System
3e-6328 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
306-8856 Alternator Gp-Charging
| 10***51 | Bolt; (M8x1.25x130-mm) | 1 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 1 |
| 14***83 | Bolt; (M10x1.5x45-mm)(Starter Motor) | 2 |
327-5326 Battery & Wiring Gp
| 10***03 | Plate-Cover | 8 |
| 10***04 | Plate As | 1 |
| 10***05 | Plate | 1 |
328-9946 Box Gp-Control
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
| 27***74 | Box; (Lh) | 1 |
289-5816 Box Gp-Junction
| 28***16 | Box Group-Junction | 1 |
| 29***80 | Terminal | 1 |
| 30***01 | Terminal | 10 |
304-6436 Control Gp-Engine Electronic
| 27***01 | Connection | 2 |
| 27***02 | Seal-O-Ring | 2 |
| 30***36 | Bearing Spacer, Control Group-Engine Electronic | 1 |
321-2415 Electrical Ar
| 32***15 | Electrical Ar | 1 |
| 32***65 | Generator & Mounting Group; -Belt Drive | 1 |
| 32***24 | Console Group-Operator | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
351-5775 Electronics Gp-Implement
| 35***75 | Electronics Group-Implement | 1 |
| 35***89 | Software Group-Implement | 1 |
| 35***90 | Service Group-Implement | 1 |
351-8709 Electronics Gp-Machine
| 31***96 | Software Group-Machine | 1 |
| 35***09 | Electronics Group-Machine | 1 |
321-2465 Generator & Mounting Gp -Belt Drive
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 10***54 | Bolt; (M12x1.75x35-mm) | 3 |
| 12***96 | Seal; (1.084m) | 0 |
299-5075 Glow Plug Gp
| 29***81 | Glow Plug; (24-Volt) | 4 |
| 29***72 | Bar | 1 |
| 29***75 | Glow Plug Group | 1 |
324-6845 Installation Gp-Communication -Product Link
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***74 | Cover-Connector; (Wire Router) | 1 |
234-4323 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***23 | Lamp Group-Flood; -Vertical Mount | 1 |
283-8145 Lamp Gp-Flood -Hid
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 22***74 | Bezel; (Hid) | 1 |
| 27***82 | Lens As; (Hid) | 1 |
238-2797 Lamp Gp-Head & Signal -Rh
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 2 |
344-3456 Lamp Gp-Head & Signal -Lh
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 2 |
238-2798 Lamp Gp-Head & Signal -Lh
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 2 |
259-0134 Lamp Gp-Registration Plate
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***34 | Lamp Group-Registration Plate; -European Market | 1 |
235-3937 Lamp Gp-Warning Beacon -Amber, Rotating
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***37 | Lamp Group-Warning Beacon; -Amber, Rotating | 1 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
290-6022 Lighting Gp-Flood
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
288-6925 Lighting Gp-Flood
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 2 |
321-2440 Lighting Gp-Roading
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
354-1436 Lighting Gp-Roading
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 10***58 | Flasher As; (24-Volt) | 1 |
276-1832 Lighting Gp-Warning Beacon
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
198-8284 Lighting Gp-Warning Beacon
| 03***14 | Screw; (10-32x1-In) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
258-6918 Mounting Gp-Sensor -Sonic Sensor
| 25***18 | Mounting Group-Sensor; -Sonic Sensor | 1 |
| 28***75 | Collar | 4 |
| 28***79 | Washer; (32.5x63.5x7.1-mm Thk) | 2 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 33***45 | Radio Group-Communication; -Product Link 121sr | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
330-6085 Sensor & Mounting Gp
| 10***49 | Plate | 2 |
| 13***21 | Handle | 4 |
| 14***10 | Collar | 2 |
198-8279 Sensor Gp-Auger
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 11***07 | Knob | 2 |
| 12***44 | Paddle As | 2 |
219-2385 Sensor Gp-Position
| 12***50 | Receptacle As | 1 |
| 12***51 | Bushing | 1 |
| 12***52 | Clamp As-Cable | 1 |
160-2443 Sensor Gp-Position -Rotary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
294-0112 Sensor Gp-Position
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***24 | Clamp | 2 |
| 16***41 | Support-Sensor | 2 |
278-3428 Sensor Gp-Position
| 11***24 | Clamp | 4 |
| 16***41 | Support-Sensor | 2 |
| 19***38 | Sensor Group-Sonic; (Position) | 4 |
301-0071 Sensor Gp-Position -2 Sensor
| 11***24 | Clamp | 2 |
| 19***38 | Sensor Group-Sonic; (Position) | 2 |
| 1G***11 | Shaft-Governor Control | 2 |
266-1467 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 26***67 | Sensor Group-Position; -Brake Pedal | 1 |
284-8876 Sensor Gp-Position
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 28***76 | Sensor Group-Position | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
195-8090 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 19***90 | Sensor Group-Position; -Steering | 1 |
334-7882 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
145-7028 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***28 | Sensor Group-Temperature; -Hydraulic Oil Temp | 1 |
| 15***43 | Sleeve; (2.8-Dm) | 0 |
322-9153 Sensor Gp-Temperature
| 1F***13 | Locknut; (3/4-In) | 2 |
| 23***80 | Fitting; (Pipe) | 1 |
| 32***51 | Fitting | 1 |
322-9152 Sensor Gp-Temperature
| 18***55 | Fitting-Pipe | 1 |
| 1F***13 | Locknut; (3/4-In) | 2 |
| 32***51 | Fitting | 1 |
296-1288 Electronics Gp-Machine
| 29***88 | Software Group-Implement | 1 |
| 34***21 | Software Group-Machine | 1 |
| 34***22 | Service Group-Machine | 1 |
299-5067 Starting Motor Gp-Electric
| 22***50 | Starting Motor Group-Electric | 1 |
| 29***67 | Starting Motor Group-Electric; -24-Volt | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
237-7602 Switch Gp-Disconnect -Battery
| 23***02 | Switch Group-Disconnect; -Battery | 1 |
| 31***59 | Cover As | 1 |
172-8660 Switch Gp-Liquid Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
333-4791 Switch Gp-Pressure
| 03***63 | Plug | 1 |
| 33***91 | Switch Group-Pressure | 1 |
165-5970 Switch Gp-Toggle
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
327-5330 Wiring Gp-Electronic Control
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
298-5130 Wiring Gp-Engine
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 21***39 | Strap-Cable | 3 |
| 23***39 | Clip | 1 |
293-6541 Wiring Gp-Heater
| 10***05 | Plate | 10 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
276-4607 Wiring Gp-Heater
| 10***05 | Plate | 4 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
327-5328 Wiring Gp-Machine -Rh
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
327-5329 Wiring Gp-Machine -Rear
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
327-5327 Wiring Gp-Machine -Lh
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
333-8385 Wiring Gp-Panel -240-Vac
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 13***00 | Clip; (Tab) | 1 |
333-8384 Wiring Gp-Panel -120-Vac
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 13***00 | Clip; (Tab) | 1 |
321-2447 Wiring Gp-Power Receptacle -120-Vac
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 1 |
| 2L***69 | Terminal-Ring; (2-Ga To 10-Ga, 3/8-In Screw) | 1 |
| 32***47 | Wiring Group-Power Receptacle; -120-Vac | 1 |
336-0225 Wiring Gp-Power Receptacle -110-Vac
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
321-2449 Wiring Gp-Power Receptacle -Nacd
| 2L***69 | Terminal-Ring; (2-Ga To 10-Ga, 3/8-In Screw) | 1 |
| 32***49 | Wiring Group-Power Receptacle; -Nacd | 1 |
| 33***25 | Wiring Group-Power Receptacle; -110-Vac | 1 |
321-2446 Wiring Gp-Power Receptacle -220-Vac
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 1 |
| 2L***69 | Terminal-Ring; (2-Ga To 10-Ga, 3/8-In Screw) | 1 |
| 32***46 | Wiring Group-Power Receptacle; -220-Vac | 1 |
327-5331 Wiring Gp-Power Train
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
293-6625 Wiring Gp-Screed
| 06***44 | Grommet | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
306-6660 Wiring Gp-Screed -Extension, Rh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
351-2797 Wiring Gp-Screed -Extension
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 10 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
306-8868 Wiring Gp-Screed -250-Mm Extension
| 30***60 | Wiring Group-Screed; -Extension, Rh | 1 |
| 30***61 | Wiring Group-Screed; -Extension, Lh | 1 |
| 30***68 | Wiring Group-Screed; -250-mm Extension | 1 |
306-6661 Wiring Gp-Screed -Extension, Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
276-4552 Wiring Gp-Screed -Extension
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 8 |
| 24***12 | Switch As-Toggle; (Right Extender Width Sw) | 3 |
276-4606 Wiring Gp-Screed -24-Volt
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 24 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
293-7187 Wiring Gp-Screed Heater -750-Mm Extension, Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 2 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 1 |
319-7152 Wiring Gp-Screed Heater -250-Mm Extension, Rh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 4 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
321-2437 Wiring Gp-Screed Heater
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
| 17***53 | Kit-Receptacle; (4-Pin) | 2 |
321-2444 Wiring Gp-Screed Heater
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
| 17***53 | Kit-Receptacle; (4-Pin) | 2 |
| 17***56 | Kit-Connecting Plug; (4-Pin) | 2 |
328-9591 Wiring Gp-Screed Heater -750-Mm Extension
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 3 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
306-8869 Wiring Gp-Screed Heater -250-Mm Extension
| 30***69 | Wiring Group-Screed Heater; -250-mm Extension, Cover | 1 |
| 31***52 | Wiring Group-Screed Heater; -250-mm Extension, Rh | 1 |
| 31***53 | Wiring Group-Screed Heater; -250-mm Extension, Lh | 1 |
293-7258 Wiring Gp-Screed Heater -750-Mm Extension, Rh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 2 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
319-7153 Wiring Gp-Screed Heater -250-Mm Extension, Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 4 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
Electrical System
294-8231 Box Gp-Screed Control -Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 21 |
294-8232 Box Gp-Screed Control -Lh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 18 |
289-3576 Box Gp-Screed Control -Lh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 1 |
348-7769 Box Gp-Screed Control
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 12 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 13***00 | Clip; (Tab) | 6 |
289-3575 Box Gp-Screed Control -Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 1 |
Engine Arrangement
285-3201 Engine Ar-Primary
| 28***01 | Engine Ar-Primary | 1 |
| 29***23 | Cylinder Block Group-Short | 1 |
| 29***85 | Cylinder Block Group | 1 |
321-2420 Installation Ar-Engine
| 28***01 | Engine Ar-Primary | 1 |
| 32***20 | Installation Ar-Engine | 1 |
| 32***50 | Mounting Group-Engine Flexible | 1 |
Feeder Drag And Auger Conveyors
352-4611 Auger Gp
| 09***69 | Bolt | 4 |
| 10***55 | Plate | 1 |
| 17***24 | Bar | 2 |
106-9718 Bearing Gp-Auger
| 01***41 | Setscrew-Socket | 3 |
| 10***18 | Bearing Group-Auger | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
116-9509 Bearing Gp-Auger
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***09 | Bearing Group-Auger | 1 |
201-5584 Bearing Gp-Auger
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
| 20***84 | Bearing Group-Auger | 1 |
321-2419 Conveyor Ar-Drag & Auger
| 21***70 | Footshaft Group | 2 |
| 32***19 | Conveyor Ar-Drag & Auger | 1 |
| 32***44 | Guard Group-Conveyor | 1 |
352-4610 Conveyor Gp-Auger
| 10***85 | Plate | 2 |
| 10***91 | Pipe | 2 |
| 10***96 | Plate | 1 |
323-5568 Conveyor Gp-Drag
| 05***20 | Pin-Spring | 100 |
| 12***46 | Bar-Feeder | 50 |
| 32***68 | Conveyor Group-Drag | 1 |
334-7637 Door Gp-Access
| 33***37 | Door Group-Access | 1 |
| 33***39 | Panel As | 1 |
| 33***40 | Louver As | 1 |
322-9721 Door Gp-Access
| 10***56 | Rod; (Prop) | 4 |
| 11***77 | Bumper-Rubber | 4 |
| 12***27 | Spacer; (9x14x3.5-mm Thk) | 1 |
352-4622 Drive Gp-Conveyor
| 10***99 | Sprocket As; (12-Teeth) | 2 |
| 13***92 | Key-Square | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
198-8287 Extension Gp-Auger -12-In, Rh
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
199-4206 Extension Gp-Auger -12-In, Lh
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
231-2042 Extension Gp-Auger -24-In, Rh
| 23***42 | Extension Group-Auger; -24-In, Rh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
231-3532 Extension Gp-Auger -6-In
| 23***32 | Extension Group-Auger; -6-In | 1 |
| 31***84 | Tube | 2 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 2 |
231-2043 Extension Gp-Auger -24-In, Lh
| 23***43 | Extension Group-Auger; -24-In, Lh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
243-0329 Extension Gp-Auger -18-In
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 23***32 | Extension Group-Auger; -6-In | 1 |
215-1870 Footshaft Gp
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
322-7244 Guard Gp-Conveyor
| 12***54 | Screw-Flat Head; (M12x1.75x35-mm) | 48 |
| 19***40 | Plate | 2 |
| 21***33 | Plate | 2 |
323-8177 Hydraulic Ar-Conveyor
| 32***77 | Hydraulic Ar-Conveyor | 1 |
| 32***85 | Pump & Mtg Group-Conveyor | 1 |
| 32***86 | Motor & Mtg Group-Conveyor | 1 |
323-8186 Motor & Mtg Gp-Conveyor
| 10***20 | Seal-O-Ring | 2 |
| 11***80 | Elbow | 1 |
| 14***27 | Connector Group | 3 |
323-8185 Pump & Mtg Gp-Conveyor
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***25 | Connector As. | 11 |
| 14***27 | Connector Group | 2 |
263-6003 Shaft Gp-Feeder Drive
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 4 |
| 10***30 | Bearing-Flange | 2 |
| 10***70 | Key-Square | 2 |
Frame And Body
300-9991 Arm Gp-Drop
| 13***20 | Shaft | 2 |
| 13***77 | Lockout | 2 |
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
276-4589 Arm Gp-Drop
| 10***68 | Nipple-Pipe | 2 |
| 11***99 | Pin As-Pivot | 2 |
| 13***77 | Lockout | 4 |
321-2433 Arm Gp-Tow
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 19***19 | Roller | 4 |
| 19***20 | Shaft | 2 |
356-5146 Ballast & Mounting Gp -6-Plate
| 35***40 | Plate | 4 |
| 35***99 | Plate | 2 |
| 35***46 | Ballast & Mounting Group; -6-Plate | 1 |
316-1659 Ballast & Mounting Gp -2-Plate
| 31***59 | Ballast & Mounting Group; -2-Plate | 1 |
| 35***40 | Plate | 2 |
| 7X***75 | Bolt-Plt; (M16 X 2.0 X 130) | 4 |
356-4739 Ballast & Mounting Gp -4-Plate
| 35***39 | Ballast & Mounting Group; -4-Plate | 1 |
| 35***40 | Plate | 4 |
| 7X***75 | Bolt-Plt; (M16 X 2.0 X 130) | 4 |
315-1101 Brace Gp
| 1A***68 | Nut | 1 |
| 31***01 | Brace Group | 1 |
| 31***02 | Plate As | 1 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
350-6039 Brace Gp
| 1A***68 | Nut | 1 |
| 31***02 | Plate As | 1 |
| 35***39 | Brace Group | 1 |
350-5664 Brace Gp
| 1A***68 | Nut | 2 |
| 35***64 | Brace Group | 1 |
| 35***88 | Tube As-Brace | 1 |
232-1107 Bracket Gp-Support
| 22***51 | Bracket | 1 |
| 23***07 | Bracket Group-Support | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
282-8500 Bracket Gp-Support
| 12***73 | Extension As | 2 |
| 12***20 | Shim; (1.65-mm Thk) | 8 |
| 24***82 | Plate | 2 |
295-3079 Carriage Gp-Extender
| 16***39 | Bolt; (5/8-11x3.5-In) | 6 |
| 18***25 | Scraper; (Brass) | 6 |
| 19***57 | Scraper As | 6 |
321-2462 Conversion Gp-Roading
| 10***49 | Reflector-Yellow | 8 |
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 13***82 | Arm-Mirror | 2 |
321-2461 Conversion Gp-Roading
| 10***16 | Cover-Work Light | 2 |
| 13***82 | Arm-Mirror | 2 |
| 13***83 | Mirror-Convex | 2 |
272-2384 Cover Gp-Platform
| 27***43 | Cover | 2 |
| 27***84 | Cover Group-Platform | 1 |
| 9X***42 | Screw-Truss Head (M6x1.0x12mm); (M6x1.00x12mm) | 6 |
328-9585 Cover Gp-Screed
| 09***22 | Ring-Retaining | 4 |
| 11***33 | Washer; (11x50x6-mm Thk) | 8 |
| 25***67 | Nut; (M20x1.5-Thd) | 4 |
276-4582 Deflector Gp
| 10***31 | Nut-Spring | 8 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 8 |
| 12***80 | Locknut; (M12x1.75-Thd) | 18 |
231-1982 Extension Gp-Main Frame -12-In
| 10***88 | Extension As | 1 |
| 23***82 | Extension Group-Main Frame; -12-In | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
349-1450 Extension Gp-Main Frame
| 12***09 | Screw-Flat Head; (M10x1.5x20-mm) | 8 |
| 17***11 | Locknut; (M16x2-Thd) | 4 |
| 18***99 | Connector As | 2 |
215-7553 Extension Gp-Main Frame
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
231-1983 Extension Gp-Main Frame -24-In
| 10***90 | Extension As | 1 |
| 23***83 | Extension Group-Main Frame; -24-In | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
346-1707 Flashing Gp -Belting
| 27***42 | Plate | 2 |
| 28***01 | Screw-Button Head; (M10x1.5x40-mm) | 14 |
| 30***72 | Nut-Weld; (M10x1.5-Thd) | 21 |
346-1708 Flashing Gp -Plastic-Manual Fold
| 15***74 | Bolt-Round Head; (M12x1.75x60-mm) | 5 |
| 25***07 | Bolt-Round Head; (M12x1.75x65-mm) | 12 |
| 27***62 | Flashing | 1 |
346-1709 Flashing Gp -Belting
| 15***74 | Bolt-Round Head; (M12x1.75x60-mm) | 5 |
| 25***07 | Bolt-Round Head; (M12x1.75x65-mm) | 12 |
| 27***48 | Plate | 1 |
346-1706 Flashing Gp -Plastic-Hydraulic Fold
| 27***42 | Plate | 2 |
| 28***01 | Screw-Button Head; (M10x1.5x40-mm) | 14 |
| 30***84 | Plate | 1 |
338-7260 Frame Gp-Main
| 33***60 | Frame Group-Main | 1 |
| 33***66 | Frame As | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 6 |
276-4604 Frame Gp-Screed
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
295-3080 Frame Gp-Screed
| 19***12 | Plate | 2 |
| 1D***06 | Nut 13.89 mm (.546 In.) | 4 |
| 20***59 | Pin-Lock | 2 |
276-4603 Gate Gp-End
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***47 | Washer | 2 |
| 24***16 | Actuator Group | 4 |
253-4735 Gate Gp-End
| 24***16 | Actuator Group | 4 |
| 25***35 | Gate Group-End | 1 |
| 25***29 | Support As; (Lh) | 1 |
273-9969 Guide Gp-Steering
| 19***54 | Chain | 1 |
| 27***69 | Guide Group-Steering | 1 |
| 27***65 | Bar | 1 |
327-5709 Handrail Gp
| 31***20 | Handrail As; (Rh) | 1 |
| 32***09 | Handrail Group | 1 |
| 33***78 | Handrail As; (Lh) | 1 |
301-1468 Hitch Gp-Oscillating
| 19***08 | Bar | 2 |
| 19***09 | Pin As | 1 |
| 30***68 | Hitch Group-Oscillating | 1 |
343-3000 Hopper Gp -Hydraulic
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 1 |
| 26***33 | Pin As | 1 |
| 27***32 | Plate As | 1 |
345-8116 Hopper Gp
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
| 16***85 | Pin As | 2 |
273-7452 Lines Gp-Grease
| 14***20 | Connector As | 2 |
| 14***85 | Elbow; (45°) | 8 |
| 14***89 | Elbow As | 6 |
263-5961 Lock Gp-Transport
| 25***97 | Bar | 2 |
| 26***61 | Lock Group-Transport | 1 |
| 31***09 | Plate | 2 |
316-1660 Mounting Gp-Ballast
| 31***60 | Mounting Group-Ballast | 1 |
| 31***62 | Plate | 2 |
| 7X***56 | Bolt-Plt; (M16 X 2.0 X 100) | 4 |
276-4605 Plate & Heater Gp-Screed -Electric Heat
| 26***54 | Shim; (2-mm Thk) | 4 |
| 27***05 | Plate & Heater Group-Screed; -Electric Heat | 1 |
| 29***23 | Nut-Adjustment; (1-1/4-12-Thd) | 44 |
328-9579 Plate & Heater Gp-Screed -750-Mm Extension
| 03***57 | Washer; (13x26x6-mm Thk) | 16 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
295-3084 Plate & Heater Gp-Screed -Electric Heat
| 18***31 | Bolt-Special; (1 1/4-12-2athd) | 4 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 21***69 | Stud | 4 |
273-1160 Plate Gp
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 1 |
| 26***33 | Pin As | 1 |
| 27***45 | Bar | 1 |
308-3130 Plate Gp-Screed -Electric Heat, Main
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***37 | Bracket; (Rh) | 16 |
| 25***01 | Plate-Main | 1 |
311-6561 Plate Gp-Screed -Electric Heat, Main
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***75 | Bracket | 16 |
| 25***44 | Spacer; (14.86x19.05x12.5-mm Thk) | 8 |
295-2942 Plate Gp-Screed
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 13***89 | Clip; (Ladder) | 6 |
| 25***44 | Spacer; (14.86x19.05x12.5-mm Thk) | 4 |
308-3132 Plate Gp-Screed -Electric Heat, Extender, Lh
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***37 | Bracket; (Rh) | 8 |
| 25***13 | Plate; (Lh Extender) | 1 |
308-3131 Plate Gp-Screed -Electric Heat, Extender, Rh
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***37 | Bracket; (Rh) | 8 |
| 25***06 | Plate; (Extender, Rh) | 1 |
245-9078 Plate Gp-Screed -Electric Heat, 28-In
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 2 |
245-9077 Plate Gp-Screed -Electric Heat, 12-In
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 1 |
302-3944 Step Gp
| 30***44 | Step Group | 1 |
| 32***85 | Step As | 1 |
| 7F***88 | Pin | 2 |
321-2422 Structural Ar
| 26***61 | Lock Group-Transport | 1 |
| 32***22 | Structural Ar | 1 |
| 32***33 | Arm Group-Tow | 1 |
350-6038 Support Gp-Frame
| 23***07 | Bracket Group-Support | 2 |
| 35***64 | Brace Group | 1 |
| 35***38 | Support Group-Frame | 1 |
231-1956 Support Gp-Frame
| 10***89 | Brace Group | 1 |
| 23***56 | Support Group-Frame | 1 |
| 23***07 | Bracket Group-Support | 1 |
322-9331 Suppression Gp-Sound
| 32***31 | Suppression Group-Sound | 1 |
| 32***32 | Insulation-Sound Suppression | 1 |
| 32***33 | Insulation-Sound Suppression | 1 |
321-2436 Ventilation Gp-Paver
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***04 | Housing As-Blower | 1 |
329-8222 Walkway Gp
| 03***69 | Tube | 4 |
| 25***07 | Spacer; (8.4x14x17-mm Thk) | 4 |
| 32***22 | Walkway Group | 1 |
Fuel System
276-0079 Control Gp-Decelerator
| 26***48 | Pedal Group-Governor; -Electronic | 2 |
| 27***36 | Spacer | 2 |
| 27***79 | Control Group-Decelerator | 1 |
201-7654 Cover Gp-Fuel Tank
| 20***53 | Plate | 1 |
| 20***54 | Cover Group-Fuel Tank | 1 |
| 6V***98 | Bolt; (M5x0.8x16-mm) | 5 |
298-5123 Filter Gp-Primary Fuel
| 27***38 | Protection Group-Fuel System; (Line, Low Pressure) | 1 |
| 29***23 | Filter Group-Primary Fuel | 1 |
| 29***29 | Filter-Fuel; (Ultra High Efficiency)(Secondary) | 1 |
174-9570 Filter Gp-Water Sep & Fuel
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
320-0680 Injector Gp-Fuel
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
| 32***80 | Injector Group-Fuel | 1 |
324-9680 Lines Gp-Fuel
| 12***09 | Valve-Ball; (Hydraulic Tank Drain) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***45 | Connector As | 2 |
311-2271 Lines Gp-Fuel Filter
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
| 23***15 | Clip-Pipe | 3 |
324-0532 Pump Gp-Fuel Injection
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***72 | Fitting-Fuel | 2 |
| 22***00 | Seal-O-Ring | 3 |
352-6584 Pump Gp-Fuel Injection
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***72 | Fitting-Fuel | 1 |
| 22***00 | Seal-O-Ring | 3 |
333-4782 Pump Gp-Fuel Injection
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 4 |
212-3657 Pump Gp-Fuel Prm & Water Sep -Electric
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 17***00 | Seal; (Fuel) | 2 |
| 21***57 | Pump Group-Fuel Prm & Water Sep; -Electric-Primary Filter | 1 |
324-9679 Tank Gp-Fuel
| 16***00 | Connector As | 1 |
| 2S***40 | Clamp-Hose To Nipple | 1 |
| 32***79 | Tank Group-Fuel | 1 |
Grade References
109-5622 Leveler Gp -40-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5623 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5625 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 7 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5627 Leveler Gp -40-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5628 Leveler Gp -30-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5624 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5626 Leveler Gp -Outboard
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***04 | Tube; (1.1-M) | 1 |
Hydraulic System
334-3260 Cover Gp
| 14***11 | Plug Group | 1 |
| 29***10 | Plate-Cover | 1 |
| 33***60 | Cover Group | 1 |
338-9562 Cover Gp
| 03***06 | Seal (Use As Required) | 1 |
| 16***80 | Plug As. | 1 |
| 20***72 | Plug As | 1 |
338-7261 Cover Gp
| 19***64 | Plate | 2 |
| 20***04 | Plate | 2 |
| 23***62 | Plate | 2 |
270-7226 Cylinder & Mtg Gp-Auger
| 14***68 | Elbow Group | 4 |
| 17***51 | Pin-Clevis | 2 |
| 19***59 | Cylinder Group-Hydraulic; -Auger, Rh | 1 |
276-5032 Cylinder & Mtg Gp-Hopper
| 14***68 | Elbow Group | 2 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 2 |
| 27***60 | Cylinder Group-Hydraulic; -Screed Hoist | 2 |
323-8196 Cylinder & Mtg Gp-Hopper
| 10***44 | Elbow | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 20***00 | Elbow As | 2 |
270-7224 Cylinder & Mtg Gp-Screed Hoist
| 14***74 | Elbow As | 2 |
| 16***88 | Elbow; (90-Deg) | 1 |
| 17***51 | Pin-Clevis | 4 |
333-0274 Cylinder & Mtg Gp-Tow Point
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 14***18 | Connector As | 2 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 2 |
194-7260 Cylinder Gp-Hydraulic -Auger, Lh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 19***60 | Cylinder Group-Hydraulic; -Auger, Lh | 1 |
| 23***18 | Kit-Seal; (Auger Cylinder, Lh) | 1 |
275-0895 Cylinder Gp-Hydraulic
| 26***92 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 27***95 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 29***49 | Cylinder Group-Hydraulic; -Hopper | 1 |
197-9766 Cylinder Gp-Hydraulic -Slope
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 14***61 | Plug | 2 |
| 14***62 | Seal-Washer | 2 |
292-8449 Cylinder Gp-Hydraulic
| 29***49 | Cylinder Group-Hydraulic; -Hopper | 1 |
270-3560 Cylinder Gp-Hydraulic
| 25***75 | Ring-Retaining | 1 |
| 27***60 | Cylinder Group-Hydraulic; -Screed Hoist | 1 |
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 1 |
268-1692 Cylinder Gp-Hydraulic
| 26***92 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 27***79 | Kit-Seal; (Hydraulic Cylinder) | 1 |
| 2K***71 | Locknut; (1-14-Thd) | 1 |
135-0218 Cylinder Gp-Hydraulic -Extender
| 03***39 | Ring-Back-Up | 1 |
| 12***75 | Ring-Wear | 2 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 1 |
194-7259 Cylinder Gp-Hydraulic
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 19***59 | Cylinder Group-Hydraulic; -Auger, Rh | 1 |
| 23***20 | Kit-Plug; (Auger Cylinder) | 1 |
325-1854 Drive Gp-Pump
| 14***53 | Hose; (272.2-cm) | 0 |
| 14***12 | Adapter As | 2 |
| 14***52 | Union As | 1 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 17***15 | Filter Group-Oil; -Hydraulic Tank | 1 |
343-3001 Hydraulic Ar
| 32***94 | Valve & Mtg Group-Truck Hitch | 1 |
| 34***99 | Lines Group-Hitch | 1 |
| 34***01 | Hydraulic Ar | 1 |
321-2452 Hydraulic Ar
| 32***52 | Hydraulic Ar | 1 |
| 32***77 | Hydraulic Ar-Conveyor | 1 |
| 32***78 | Hydraulic Ar-Vibratory | 1 |
336-7931 Hydraulic Ar-Auxiliary
| 27***24 | Cylinder & Mtg Group-Screed Hoist | 1 |
| 27***26 | Cylinder & Mtg Group-Auger | 1 |
| 32***92 | Valve & Mtg Group-Control; -Brake Release | 1 |
323-8179 Hydraulic Ar-Fan
| 28***51 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 32***79 | Hydraulic Ar-Fan | 1 |
| 32***50 | Pump & Mtg Group-Hydraulic Fan | 1 |
321-2438 Hydraulic Ar-Tamper
| 32***38 | Hydraulic Ar-Tamper | 1 |
| 32***14 | Lines Group-Tamper | 1 |
| 32***15 | Pump & Mtg Group-Auxiliary | 1 |
323-8178 Hydraulic Ar-Vibratory
| 32***78 | Hydraulic Ar-Vibratory | 1 |
| 32***89 | Valve & Mtg Group-Vibratory | 1 |
| 32***90 | Lines Group-Vibratory | 1 |
324-3243 Lines Gp-Auger
| 10***05 | Plate | 2 |
| 10***45 | Clamp | 4 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
339-8115 Lines Gp-Brake & Shift
| 10***03 | Plate-Cover | 1 |
| 10***05 | Plate | 2 |
| 14***77 | Elbow As. | 2 |
323-8188 Lines Gp-Conveyor
| 10***05 | Plate | 2 |
| 14***75 | Elbow Group | 1 |
| 14***55 | Union As | 2 |
295-3078 Lines Gp-Extender
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***36 | Elbow As. | 2 |
| 16***32 | Pin | 2 |
350-1624 Lines Gp-Extender
| 10***03 | Plate-Cover | 3 |
| 10***05 | Plate | 2 |
| 14***28 | Connector Assem. | 1 |
276-4585 Lines Gp-Extension
| 10***05 | Plate | 1 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 2 |
| 14***27 | Connector Group | 1 |
343-2999 Lines Gp-Hitch
| 10***03 | Plate-Cover | 5 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
| 15***90 | Bolt-Stacking; (M8x1.25x33-mm) | 4 |
343-2998 Lines Gp-Hopper
| 10***36 | Clip | 2 |
| 10***03 | Plate-Cover | 5 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
324-3242 Lines Gp-Hopper
| 31***03 | Hose As | 2 |
| 32***42 | Lines Group-Hopper | 1 |
| 34***20 | Hose As | 2 |
324-3252 Lines Gp-Hydraulic Fan
| 14***49 | Hose As | 1 |
| 14***76 | Elbow As | 2 |
| 14***93 | Elbow Group | 1 |
336-2034 Lines Gp-Pressure Test
| 13***89 | Clip; (Ladder) | 1 |
| 17***35 | Ring-Retaining | 12 |
| 18***50 | Fitting As; (Quick) | 12 |
339-8150 Lines Gp-Pump -Auxiliary
| 14***52 | Elbow As. | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***25 | Tee As | 1 |
324-3247 Lines Gp-Return
| 17***15 | Strap; (Dual Clamp) | 1 |
| 20***45 | Mount; (Dual Swivel) | 4 |
| 20***65 | Elbow As | 2 |
324-3241 Lines Gp-Screed
| 10***05 | Plate | 4 |
| 11***71 | Hose As | 1 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
324-3248 Lines Gp-Slope
| 10***36 | Clip | 1 |
| 10***05 | Plate | 1 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 1 |
253-4756 Lines Gp-Slope
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***84 | Pin As | 4 |
| 14***74 | Elbow As | 10 |
338-2660 Lines Gp-Steering
| 10***03 | Plate-Cover | 11 |
| 10***05 | Plate | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
325-8414 Lines Gp-Tamper
| 03***06 | Seal (Use As Required) | 1 |
| 12***95 | Elbow | 0 |
| 13***89 | Clip; (Ladder) | 1 |
276-4584 Lines Gp-Vibratory
| 10***03 | Plate-Cover | 1 |
| 10***05 | Plate | 3 |
| 10***22 | Support As; (Lh) | 1 |
295-3083 Lines Gp-Vibratory
| 10***05 | Plate | 4 |
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***09 | Adapter As | 3 |
323-8190 Lines Gp-Vibratory
| 10***81 | Hose As | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***66 | Elbow Group | 1 |
323-8187 Motor & Mtg Gp-Auger
| 10***20 | Seal-O-Ring | 2 |
| 11***80 | Elbow | 1 |
| 14***27 | Connector Group | 4 |
283-0351 Motor & Mtg Gp-Hydraulic Fan
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 2 |
| 14***15 | Connector As | 1 |
| 14***16 | Connector Group | 1 |
338-2668 Motor & Mtg Gp-Propel
| 12***47 | Elbow | 1 |
| 14***28 | Connector Assem. | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
332-6606 Motor & Mtg Gp-Ventilation
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 14***28 | Tee As-Orfs | 1 |
| 15***11 | Elbow | 1 |
308-2125 Motor Gp-Gear
| 30***25 | Motor Group-Gear; -Vibratory | 1 |
| 31***08 | Kit-Seal | 1 |
266-9833 Motor Gp-Gear -Paver Ventilation
| 26***11 | Kit-Seal; (Paver Ventilation Motor) | 1 |
| 26***33 | Motor Group-Gear; -Paver Ventilation | 1 |
269-0530 Motor Gp-Piston -Propel
| 07***53 | Pin; (Spring) | 2 |
| 13***95 | Orifice | 2 |
| 13***57 | Plug | 1 |
230-9384 Motor Gp-Piston -Conveyor
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
294-2887 Motor Gp-Piston
| 13***84 | Nut; (M14x1.5-Thd) | 10 |
| 14***02 | Spring | 9 |
| 14***49 | Bearing | 1 |
190-8789 Motor Gp-Piston
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
339-8155 Pump & Mtg Gp-Auxiliary
| 10***20 | Seal-O-Ring | 1 |
| 14***45 | Connector As | 1 |
| 14***57 | Elbow As. | 1 |
325-8415 Pump & Mtg Gp-Auxiliary
| 14***25 | Connector As. | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 32***15 | Pump & Mtg Group-Auxiliary | 1 |
324-3250 Pump & Mtg Gp-Hydraulic Fan
| 32***50 | Pump & Mtg Group-Hydraulic Fan | 1 |
| 32***06 | Pump Group-Gear; (Hydraulic Fan) | 1 |
| 8T***56 | Bolt-Plt; (M12 X 1.75 X 35) | 2 |
338-2669 Pump & Mtg Gp-Propel
| 10***15 | Elbow Group | 1 |
| 12***88 | Flange-Split | 8 |
| 14***38 | Elbow | 1 |
230-9385 Pump Gp-Piston -Auxiliary
| 00***91 | Cup-Roller Bearing | 1 |
| 07***35 | Kit-Bearing; (Auxiliary Pump) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
269-0533 Pump Gp-Piston
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 12 |
| 26***60 | Dowel | 4 |
| 26***33 | Pump Group-Piston; -Conveyor | 1 |
323-8180 Tank & Mtg Gp-Hydraulic
| 08***56 | 90 Degrees Elbow | 1 |
| 12***57 | Clamp-Hose | 1 |
| 13***74 | Tube As-Drain | 1 |
324-3253 Tank Gp-Hydraulic
| 00***39 | Adapter-Pipe | 1 |
| 03***06 | Seal (Use As Required) | 1 |
| 13***00 | Clip; (Tab) | 2 |
325-9374 Valve & Mtg Gp
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 3 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
343-7765 Valve & Mtg Gp
| 13***89 | Clip; (Ladder) | 1 |
| 14***18 | Connector As | 2 |
| 14***19 | Connector As | 1 |
323-8193 Valve & Mtg Gp-Auxiliary -Cooler
| 10***03 | Manifold; (Forward Return,Rear Return) | 2 |
| 14***81 | Elbow | 1 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 2 |
339-8160 Valve & Mtg Gp-Auxiliary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***78 | Union | 1 |
| 12***47 | Elbow | 1 |
323-8192 Valve & Mtg Gp-Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***16 | Connector Group | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
323-8195 Valve & Mtg Gp-Counterbalance -Hopper Hoist, Tow Point
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 7 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 4 |
332-6607 Valve & Mtg Gp-Flow Control -Ventilation
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 15***43 | Connector As. | 1 |
338-2665 Valve & Mtg Gp-Steering
| 14***91 | Steering Wheel As | 2 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***25 | Connector As. | 3 |
328-2194 Valve & Mtg Gp-Truck Hitch
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***61 | Elbow Group | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
323-8189 Valve & Mtg Gp-Vibratory
| 11***80 | Elbow | 1 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 2 |
| 15***59 | Tee Group | 1 |
270-3549 Valve Gp-Control
| 26***51 | Kit-Solenoid Valve; (Auger Raise, Lower) | 2 |
| 26***26 | Kit-Check Valve; (Apron Fold) | 2 |
| 27***49 | Valve Group-Control; -2-Bank | 1 |
269-0535 Valve Gp-Control
| 22***84 | Coil As; (24-Volt) | 1 |
| 23***82 | Nut-Special | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
230-9160 Valve Gp-Control -Truck Hitch
| 23***82 | Nut-Special | 1 |
| 23***60 | Valve Group-Control; -Truck Hitch | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
292-9094 Valve Gp-Counterbalance -Hopper Hoist, Tow Point
| 26***51 | Kit-Solenoid Valve; (Auger Raise, Lower) | 2 |
| 29***94 | Valve Group-Counterbalance; -Hopper Hoist, Tow Point | 1 |
| 30***43 | Cap, Main Bearing, Main Bearing Cap, Kit-Valve; (Control) | 2 |
332-6609 Valve Gp-Flow Control -Ventilation
| 33***56 | Kit-Seal | 1 |
| 33***09 | Valve Group-Flow Control; -Ventilation | 1 |
| 35***86 | Valve Group-Solenoid; (Ventilation) | 1 |
336-7936 Valve Gp-Flow Divider -Front Wheel Assist
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 2 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
326-6532 Valve Gp-Flow Divider
| 22***90 | Nut | 1 |
| 22***91 | Seal-O-Ring | 1 |
| 25***57 | Kit-Seal; (Check Valve) | 1 |
310-8017 Valve Gp-Solenoid
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 31***17 | Valve Group-Solenoid; -Piston Pump | 1 |
| 31***18 | Valve-Servo | 2 |
332-1453 Valve Gp-Solenoid
| 33***53 | Valve Group-Solenoid | 1 |
325-7582 Valve Gp-Solenoid
| 22***80 | Seal-O-Ring | 1 |
| 22***82 | Seal-O-Ring | 1 |
| 22***83 | Nut-Knurl; (1/2-20-Thd) | 1 |
276-4572 Vibratory Gp
| 09***99 | Fitting-Grease; (Hydraulic) | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***33 | Key-Square; (1/4in X 3/4in Lg) | 4 |
295-3082 Vibratory Gp
| 00***39 | Adapter-Pipe | 4 |
| 10***95 | Bearing | 4 |
| 10***39 | Key-Square | 4 |
Implements
328-9581 Blade & Heater Gp-Tamper -750-Mm Extension
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 27***35 | Clamp | 8 |
| 30***09 | Heater As | 2 |
350-1625 Extension Ar -Power Main Frame Extension
| 34***65 | Valve & Mtg Group; -Main Frame Extension | 1 |
| 34***50 | Extension Group-Main Frame | 1 |
| 35***24 | Lines Group-Extender | 1 |
241-9103 Extension Ar-Auger
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
| 21***53 | Extension Group-Main Frame | 1 |
339-9631 Extension Ar-Screed -Electric Heat, 5.5-M
| 24***03 | Extension Ar-Auger | 1 |
| 24***18 | Tube As; (1.8-M) | 1 |
| 32***70 | Extension Ar-Screed; -Electric Heat, 5.5-M | 1 |
328-9606 Extension Ar-Screed -Electric Heat, 7-M
| 29***20 | Extension Group-Screed | 1 |
| 29***33 | Extension Group-Screed; -6.5-M | 1 |
| 29***44 | Conversion Ar-Screed; -Electric Heat, 250-mm Extension | 1 |
328-9593 Extension Ar-Screed -Electric Heat, 6.5-M
| 29***33 | Extension Group-Screed; -6.5-M | 1 |
| 32***85 | Cover Group-Screed | 1 |
| 32***92 | Conversion Ar-Screed; -Electric Heat, 750-mm Extension | 1 |
350-6036 Extension Ar-Screed -Electric Heat, 6.5-M
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
328-9570 Extension Ar-Screed -Electric Heat, 5.5-M
| 29***20 | Extension Group-Screed | 1 |
| 29***44 | Conversion Ar-Screed; -Electric Heat, 250-mm Extension | 1 |
| 30***69 | Wiring Group-Screed Heater; -250-mm Extension, Cover | 1 |
350-6037 Extension Ar-Screed -Electric Heat, 7-M
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
253-4744 Extension Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
282-8506 Extension Gp-Screed -16-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
291-8020 Extension Gp-Screed
| 09***22 | Ring-Retaining | 2 |
| 09***85 | Locknut; (M16x2-Thd) | 2 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 4 |
350-6033 Extension Gp-Screed -6.2-M
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
292-8833 Extension Gp-Screed -6.5-M
| 09***85 | Locknut; (M16x2-Thd) | 4 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 8 |
| 13***82 | Bolt; (M16x2x100-mm) | 4 |
282-8504 Extension Gp-Screed -5.3-M
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 21***53 | Extension Group-Main Frame | 1 |
350-6035 Extension Gp-Screed -5.5-M
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
287-0329 Extension Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 28***29 | Extension Group-Screed | 1 |
| 29***74 | Extension Group-Screed | 1 |
287-0328 Extension Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 28***28 | Extension Group-Screed | 1 |
| 29***73 | Extension Group-Screed | 1 |
292-0674 Extension Gp-Screed
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***31 | Bar-Spacer | 1 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
282-8505 Extension Gp-Screed -20-Ft, 2-In
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
282-8507 Extension Gp-Screed -18-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
253-4745 Extension Gp-Screed -Electric Heat, 24-In
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
292-0673 Extension Gp-Screed
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
350-6034 Extension Gp-Screed -4.9-M
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
301-1469 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
327-4620 Indicator Gp-Tow Point
| 19***29 | Bolt-Shoulder; (M8x1.25-Thd) | 2 |
| 32***20 | Indicator Group-Tow Point | 1 |
| 33***62 | Rod As | 2 |
275-2449 Roller Ar-Push
| 19***08 | Bar | 2 |
| 19***09 | Pin As | 1 |
| 27***49 | Roller Ar-Push | 1 |
292-0983 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 10***64 | Shaft As | 2 |
| 16***17 | Roller | 2 |
112-1276 Shaft Gp-Drive -Eccentric Weight
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 11***76 | Shaft Group-Drive; -Eccentric Weight | 1 |
| 24***28 | Seal | 1 |
292-4010 Tamper Gp-Screed -Lh
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
292-4011 Tamper Gp-Screed -Rh
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
Lubrication System
329-9440 Filter Gp-Engine Oil
| 10***81 | Bracket | 1 |
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
| 14***88 | Elbow Group | 1 |
332-6608 Lines Gp-Fan Drive
| 14***93 | Elbow Group | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 1 |
| 20***45 | Mount; (Dual Swivel) | 1 |
298-5112 Pump Gp-Engine Oil
| 10***61 | Bolt; (M10x1.50x50-mm) | 5 |
| 22***29 | Pump As-Engine Oil | 1 |
| 29***12 | Pump Group-Engine Oil | 1 |
Machine Arrangement
321-2453 Chassis Ar
| 27***52 | Lines Group-Grease | 1 |
| 27***69 | Guide Group-Steering | 1 |
| 32***53 | Chassis Ar | 1 |
321-2450 Common Ar
| 32***15 | Electrical Ar | 1 |
| 32***19 | Conveyor Ar-Drag & Auger | 1 |
| 32***20 | Installation Ar-Engine | 1 |
355-7313 Common Ar
| 32***15 | Electrical Ar | 1 |
| 32***19 | Conveyor Ar-Drag & Auger | 1 |
| 32***20 | Installation Ar-Engine | 1 |
328-9592 Conversion Ar-Screed -Electric Heat, 750-Mm Extension
| 32***79 | Plate & Heater Group-Screed; -750-mm Extension | 1 |
| 32***81 | Blade & Heater Group-Tamper; -750-mm Extension | 1 |
| 32***91 | Wiring Group-Screed Heater; -750-mm Extension | 1 |
299-7244 Conversion Ar-Screed -Electric Heat, 250-Mm Extension
| 03***57 | Washer; (13x26x6-mm Thk) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
356-4007 Distribution Ar
| 19***79 | Sensor Group-Auger | 1 |
| 27***49 | Roller Ar-Push | 1 |
| 27***34 | Control Group-Thickness; -Lh Thread | 1 |
356-4005 Distribution Ar
| 16***20 | Control Group-Thickness; -Lh Thread | 1 |
| 27***49 | Roller Ar-Push | 1 |
| 28***25 | Lighting Group-Flood | 1 |
356-4006 Distribution Ar
| 16***20 | Control Group-Thickness; -Lh Thread | 1 |
| 27***49 | Roller Ar-Push | 1 |
| 28***25 | Lighting Group-Flood | 1 |
327-4619 Kit-Maintenance
| 10***84 | Relay As; (24-Volt) | 1 |
| 10***87 | Switch As-Toggle; (Screed Raise/Hld/Float) | 1 |
| 11***90 | Fuse; (10 Amp) | 2 |
354-8206 Option Ar-Hopper -Apron Fold
| 34***00 | Hopper Group; -Hydraulic | 1 |
| 34***06 | Flashing Group; -Plastic-Hydraulic Fold | 1 |
| 35***06 | Option Ar-Hopper; -Apron Fold | 1 |
354-8220 Option Ar-Hopper -Manual Fold
| 27***60 | Plate Group | 1 |
| 34***08 | Flashing Group; -Plastic-Manual Fold | 1 |
| 35***20 | Option Ar-Hopper; -Manual Fold | 1 |
354-8221 Option Ar-Hopper -Manual Fold, Eame
| 27***60 | Plate Group | 1 |
| 34***09 | Flashing Group; -Belting-Manual Fold | 1 |
| 35***21 | Option Ar-Hopper; -Manual Fold, Eame | 1 |
354-8207 Option Ar-Hopper -Apron Fold
| 34***00 | Hopper Group; -Hydraulic | 1 |
| 34***07 | Flashing Group; -Belting-Hydraulic Fold | 1 |
| 35***07 | Option Ar-Hopper; -Apron Fold | 1 |
354-8223 Option Ar-Machine
| 27***84 | Cover Group-Platform | 1 |
| 32***36 | Ventilation Group-Paver | 1 |
| 32***22 | Walkway Group | 1 |
354-8222 Option Ar-Machine
| 27***79 | Control Group-Decelerator | 1 |
| 32***36 | Ventilation Group-Paver | 1 |
| 32***22 | Walkway Group | 1 |
354-8224 Option Ar-Machine
| 27***79 | Control Group-Decelerator | 1 |
| 32***36 | Ventilation Group-Paver | 1 |
| 33***23 | Canopy Group | 1 |
354-8227 Option Ar-Machine
| 27***79 | Control Group-Decelerator | 1 |
| 33***23 | Canopy Group | 1 |
| 33***60 | Cover Group | 1 |
354-8226 Option Ar-Machine
| 27***84 | Cover Group-Platform | 1 |
| 32***22 | Walkway Group | 1 |
| 33***60 | Cover Group | 1 |
354-8228 Option Ar-Machine
| 27***84 | Cover Group-Platform | 1 |
| 33***23 | Canopy Group | 1 |
| 33***60 | Cover Group | 1 |
354-8225 Option Ar-Machine
| 27***79 | Control Group-Decelerator | 1 |
| 32***22 | Walkway Group | 1 |
| 33***60 | Cover Group | 1 |
354-8232 Option Ar-Screed -Tamper, Vibratory Adapter
| 32***37 | Wiring Group-Screed Heater | 1 |
| 32***38 | Hydraulic Ar-Tamper | 1 |
| 35***32 | Option Ar-Screed; -Tamper, Vibratory Adapter | 1 |
354-8233 Option Ar-Screed -Tamper, Viberatory Adptr, Eame
| 32***38 | Hydraulic Ar-Tamper | 1 |
| 32***44 | Wiring Group-Screed Heater | 1 |
| 35***33 | Option Ar-Screed; -Tamper, Viberatory Adptr, Eame | 1 |
354-8231 Option Ar-Screed -Vibratory Adapter
| 32***37 | Wiring Group-Screed Heater | 1 |
| 32***66 | Option Ar-Screed | 1 |
| 35***31 | Option Ar-Screed; -Vibratory Adapter | 1 |
321-2466 Option Ar-Screed
| 32***66 | Option Ar-Screed | 1 |
| 33***62 | Cover Group | 1 |
354-8229 Option Ar-Washdown -Diesel
| 27***58 | Lines Group-Spray Down | 1 |
| 32***67 | Washdown Group; -Diesel Fuel | 1 |
| 35***29 | Option Ar-Washdown; -Diesel | 1 |
354-8209 Option Ar-Washdown -Ecology Tank, Reel
| 27***57 | Reel Group-Washdown Hose | 1 |
| 32***34 | Washdown Group-Ecology | 1 |
| 35***09 | Option Ar-Washdown; -Ecology Tank, Reel | 1 |
354-8230 Option Ar-Washdown -Diesel, Reel
| 27***57 | Reel Group-Washdown Hose | 1 |
| 32***67 | Washdown Group; -Diesel Fuel | 1 |
| 35***30 | Option Ar-Washdown; -Diesel, Reel | 1 |
354-8208 Option Ar-Washdown -Ecology Tank, Wand
| 27***58 | Lines Group-Spray Down | 1 |
| 32***34 | Washdown Group-Ecology | 1 |
| 35***08 | Option Ar-Washdown; -Ecology Tank, Wand | 1 |
294-0947 Screed Ar
276-4539 Screed Ar -As3251c
| 27***39 | Screed Ar; -As3251c, U.S. | 1 |
| 27***72 | Vibratory Group | 1 |
| 27***73 | Sloper Group-Power | 1 |
Operator Station
330-9923 Canopy Gp
| 03***69 | Tube | 4 |
| 17***55 | Pin | 2 |
| 24***14 | Rod | 2 |
327-5324 Console Gp-Operator
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***87 | Start Switch Assembly; (Key)(Engine) | 1 |
| 12***74 | Cover-Connector; (Wire Router) | 4 |
274-8748 Control Gp-Unprgmed Monitor -Advisor
| 23***00 | Cover-Switch | 1 |
| 23***01 | Cover-Switch | 1 |
| 23***03 | Cover-Switch | 2 |
284-8905 Control Gp-Unprgmed Monitor -Advisor
| 27***48 | Control Group-Unprgmed Monitor; -Advisor | 1 |
| 28***05 | Control Group-Unprgmed Monitor; -Advisor | 1 |
348-3782 Display Gp-Monitor
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 10 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
330-6558 Display Gp-Monitor
| 15***62 | Knob | 2 |
| 2M***19 | Ring-Retaining | 2 |
| 32***46 | Box Group-Control | 1 |
330-6089 Display Gp-Monitor -Unprogrammed
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 14***44 | Plug As-Connector; (70-Pin) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
327-5718 Floor Mat Gp
| 23***39 | Floor Mat | 2 |
| 27***57 | Floor Mat | 1 |
| 27***26 | Floor Mat | 1 |
321-2435 Guard Gp-Vandalism
| 10***14 | Knob | 2 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 2 |
| 15***93 | Screw-Button Head; (M4x0.7x12-mm) | 2 |
250-2297 Meter Gp-Service -White Backlight
| 25***97 | Meter Group-Service; -White Backlight | 1 |
| 4B***43 | Nut,Plain,Hexagon Plate Mtg | 1 |
| 6V***07 | Seal-Rectangular | 1 |
321-2421 Operator Ar
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 32***21 | Operator Ar | 1 |
| 32***35 | Guard Group-Vandalism | 2 |
327-5333 Panel Gp-Control -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
327-5332 Panel Gp-Control -Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
261-7148 Pedal Gp-Governor -Electronic
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
332-8951 Platform Gp-Operator -Lh
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 13***64 | Bushing | 2 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
276-4588 Platform Gp-Operator
| 08***97 | Washer; (13x50x6-mm Thk) | 3 |
| 10***38 | Collar | 1 |
| 14***74 | Extension As-Platform | 2 |
295-3087 Platform Gp-Operator
| 11***33 | Washer; (11x50x6-mm Thk) | 2 |
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 2 |
| 19***01 | Bracket | 2 |
332-8950 Platform Gp-Operator -Rh
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 13***00 | Clip; (Tab) | 4 |
| 13***64 | Bushing | 2 |
199-4298 Seat Gp-Suspension -Vinyl
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 2 |
235-3151 Seat Gp-Suspension -Vinyl
| 19***32 | Kit-Foam Back | 1 |
| 20***36 | Kit-Damper | 1 |
| 20***37 | Kit-Seat; (Indicators) | 1 |
288-3856 Steering Column Gp -Basic
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 16***61 | Nut; (M18x1.5-Thd) | 1 |
| 21***55 | Kit-Tilt Lever; (Steering Column) | 1 |
106-8541 Umbrella Gp
| 10***41 | Umbrella Group; -Bg-225c | 1 |
187-6649 Umbrella Gp
| 18***49 | Umbrella Group; -Ap-650b | 1 |
Power Train
321-2460 Assist Gp-Front Wheel -4-Wheel Drive
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
321-2459 Assist Gp-Front Wheel -2-Wheel Drive
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
343-5939 Drive Ar-Final
| 34***39 | Drive Ar-Final | 1 |
| 34***40 | Drive Group-Final | 1 |
343-5940 Drive Gp-Final
| 16***69 | Adapter; (Str Thd (-6) Orfs/0) | 2 |
| 31***01 | Housing-Planetary | 2 |
| 31***55 | Planetary Group-Final Drive | 2 |
352-2524 Drive Gp-Hydrostatic
| 27***40 | Kit-Seal; (Pump Drive) | 1 |
| 27***41 | Kit-Bearing | 1 |
| 32***90 | Gauge-Sight; (Oil Level) | 1 |
336-7929 Hydraulic Ar-Propel
| 33***29 | Hydraulic Ar-Propel | 1 |
| 33***67 | Lines Group-Propel | 1 |
| 33***68 | Motor & Mtg Group-Propel | 1 |
338-2667 Lines Gp-Propel
| 13***97 | Hose Assem. | 1 |
| 14***38 | Elbow | 1 |
| 14***75 | Elbow Group | 1 |
338-2655 Lines Gp-Propel -Front Wheel Assist
| 08***56 | 90 Degrees Elbow | 1 |
| 10***03 | Plate-Cover | 1 |
| 10***05 | Plate | 3 |
336-7937 Lines Gp-Propel -Front Wheel Assist
| 08***56 | 90 Degrees Elbow | 1 |
| 10***03 | Plate-Cover | 1 |
| 10***05 | Plate | 3 |
340-5456 Wheel & Tire Gp
| 07***95 | Cap, Valve Stem | 1 |
| 07***92 | Valve | 1 |
| 10***35 | Tire; (17.5-R25) | 1 |
340-5455 Wheel & Tire Gp
| 07***95 | Cap, Valve Stem | 1 |
| 07***92 | Valve | 1 |
| 24***26 | Tire; (17.5-R25) | 1 |
340-4801 Wheel Ar
| 34***01 | Wheel Ar | 1 |
| 34***55 | Wheel & Tire Group | 2 |
321-2439 Wheel Ar
| 32***39 | Wheel Ar | 1 |
| 34***56 | Wheel & Tire Group | 2 |
Service Equipment And Supplies
7r-4741 Lines Gp-Spray Down
| 08***77 | Adapter | 1 |
| 1G***70 | Extension-Curve | 1 |
| 1G***79 | Hose As | 1 |
278-0358 Lines Gp-Spray Down
| 27***58 | Lines Group-Spray Down | 1 |
| 28***78 | Connector | 1 |
| 28***79 | Connector As | 1 |
295-3081 Plate & Film Gp
| 15***79 | Film-Instruction; (Grease)(Instructions) | 8 |
| 16***89 | Tack-Fastener | 4 |
| 18***68 | Plate-Serial Number | 1 |
333-2711 Plate & Film Gp -U.S.
| 11***73 | Film-Stripe; (450-cm Each) | 0 |
| 11***75 | Film-Identification; (Barber-Greene)(Barber-Greene) | 3 |
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
321-2463 Plate & Film Gp -U.S.
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
276-4609 Plate & Film Gp
| 10***14 | Handle | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***68 | Plate-Serial Number | 1 |
343-3067 Plate & Film Gp -International
| 11***73 | Film-Stripe; (450-cm Each) | 0 |
| 11***75 | Film-Identification; (Barber-Greene)(Barber-Greene) | 3 |
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
321-2464 Plate & Film Gp -International
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
266-4529 Pump & Motor Gp-Washdown -Water
| 26***29 | Pump & Motor Group-Washdown; -Water-Emulsion-Diesel Fuel | 1 |
| 31***68 | Kit-Diaphragm | 1 |
| 31***69 | Kit-Valve | 1 |
278-0357 Reel Gp-Washdown Hose
| 15***02 | Spacer; (11x20x15-mm Thk) | 2 |
| 19***88 | Clip | 2 |
| 1G***70 | Extension-Curve | 1 |
321-2467 Washdown Gp
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 10***90 | Hose As | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
321-2434 Washdown Gp-Ecology
| 00***14 | Coupling-Pipe | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
Slope And Grade Control
333-1224 Beam Gp-Transverse
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 19***78 | Pad | 2 |
| 2G***67 | Washer; (10.5x60x3-mm Thk) | 7 |
298-0648 Cable Gp-Control
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***08 | Bushing | 2 |
298-0647 Cable Gp-Control
| 10***63 | Clamp | 1 |
| 11***98 | Plug | 1 |
| 11***08 | Bushing | 2 |
330-6083 Control Gp-Grade & Slope -Accugrade
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***33 | Wire; (30-cm) | 0 |
337-9988 Control Gp-Grade & Slope -Accugrade
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
279-2461 Control Gp-Grade & Slope
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
298-0645 Control Gp-Grade & Slope
| 20***30 | Control Group-Grade & Slope | 1 |
| 23***08 | Link; (6-Pin) | 2 |
| 25***30 | Mount As | 2 |
209-3130 Control Gp-Grade & Slope
| 11***10 | Screw-Pan Head | 8 |
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
357-8491 Sensor Gp-Grade
| 27***73 | Clip | 2 |
| 31***97 | Sensor-Angle; (As200c)(Grade Control) | 1 |
| 33***46 | Cap-Connector | 2 |
298-0642 Sensor Gp-Grade
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
348-3783 Sensor Gp-Sonic
| 09***49 | Bolt; (M8x1.25x40-mm) | 4 |
| 13***39 | Screw-Flat Head; (M8x1.25x30-mm) | 4 |
| 27***73 | Clip | 2 |
258-6580 Sensor Gp-Sonic -Averaging Ski
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
330-6084 Sensor Gp-Sonic
| 10***49 | Plate | 2 |
| 13***21 | Handle | 4 |
| 14***10 | Collar | 2 |
282-8520 Sensor Gp-Sonic
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
257-6255 Ski Gp-Averaging
| 25***29 | Mount As | 2 |
| 25***30 | Mount As | 2 |
| 25***55 | Ski Group-Averaging | 1 |
Undercarriage
331-9826 Bogie Gp -Rh
| 00***31 | Cup-Bearing | 4 |
| 00***43 | Nut | 2 |
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
339-8130 Bogie Gp -Lh
| 00***31 | Cup-Bearing | 2 |
| 00***43 | Nut | 1 |
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
339-8131 Bogie Gp -Rh
| 00***31 | Cup-Bearing | 2 |
| 00***43 | Nut | 1 |
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
331-9825 Bogie Gp -Lh
| 00***31 | Cup-Bearing | 4 |
| 00***43 | Nut | 2 |
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
331-9824 Bogie Gp -2-Wheel Drive
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
339-8132 Bogie Gp -Lh
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
| 08***52 | Tire; (22x6x17.75) | 1 |
| 08***77 | Plate-Locking | 2 |
339-8133 Bogie Gp -Lh
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
| 08***52 | Tire; (22x6x17.75) | 1 |
| 08***77 | Plate-Locking | 2 |
BG500E serial number reference
The PIN plate on the BG500E is a riveted metal tag mounted on the machine frame, typically at the rear of the tractor unit near the operator platform steps or lower frame rail below the console. Read the first 3 characters as the serial number prefix (identifies model and plant), followed by the sequence number; on the newer 17-character PIN format the same prefix and sequence sit within the full string. Clean the plate and check it against the paver's own documentation rather than a sibling model's, since wheel and track versions in this family share catalog pages.
| Prefix | Identifies | Notes |
|---|---|---|
| B5E | BG500E wheel asphalt paver, badge-twin of the wheeled AP500E on the same B5E-coded chassis/parts platform | Effective B5E1-up. Powered by the Cat C4.4 engine, 106 kW (142 hp), meeting Tier 3 / Stage IIIA emissions. Shares its parts book and major components with the wheeled AP500E; BG500E and AP500E badge the same platform for different markets, with B5E as the machine's own prefix. The Mobil-trac tracked member of this family is the separate 555E line (AP555E/BG555E, own prefix, higher-output engine); do not carry its rubber-track undercarriage or power figures onto this model. No second series or later prefix confirmed for BG500E; treat as a single generation, but confirm undercarriage type against the physical unit or dealer since no standalone BG500E spec sheet independent of the AP500E parts grouping was found. |
Frequently asked questions
What engine does the Caterpillar BG500E use?
The BG500E runs a Cat C4.4 ACERT four-cylinder turbocharged diesel rated at 106 kW (142 hp, 144 metric hp), built to U.S. EPA Tier 3 / EU Stage IIIA emissions. That is a different tune from the later Tier 4 Final/Stage V generation marketed under the bare AP500/BG500 name, which uses a higher-output C4.4 with exhaust aftertreatment.
What is the operating weight of the Caterpillar BG500E?
Operating weight runs roughly 15.3 to 16.1 tonnes (about 33,700 to 35,600 lb) depending on the screed fitted, lighter with the vibratory AS2252C, heavier with the tamper-bar AS4252C. These figures come from the shared paver platform this model is cataloged under; check the data plate for your exact configuration.
What replaced the Caterpillar BG500E?
Caterpillar followed the BG500E with a Tier 4 Final/Stage V generation marketed under the bare AP500/BG500 name, using a higher-output C4.4 with DEF aftertreatment and the newer SE47-series screeds. That generation was later joined by the AP500F, which added quick-heating electric screed technology.
What BG500E owners discuss
What engine does the BG500E run, and are there known quirks with it?
The BG500E carries a Cat C4.4 ACERT, Tier 3/Stage IIIA rated, turbocharged 4-cylinder diesel around 106 kW (142 hp). Common complaints on this ACERT generation center on the engine speed sensor throwing a no-engine-speed fault, and hard starting with heavy white smoke when the fuel system loses prime or the lift pump weakens. Oil turning milky or coolant disappearing points to the oil cooler core, head gasket, or cylinder head, so pressure-test the cooler before condemning the head. Have your dealer verify fault codes against the ECM before swapping parts.
How does the hydraulic feed system behave day to day?
The feed side runs each auger and each conveyor off its own pump circuit rather than one shared circuit, so mix delivery can be metered independently side to side. That gives even mat delivery on wide pulls, but it also means a single weak pump or plugged screen shows up as one-sided material starvation instead of an overall slowdown. Chase uneven feed pump by pump rather than condemning the whole hydraulic system at once.
What wears fastest on this size of paver and how do you judge it?
Screed plate is the first thing to check. New plate runs about half an inch thick, and anything worn down near a quarter inch is nearing replacement. Measure all four corners; if thickness differs side to side or front to back, that is an alignment problem, often from a previous operator running heavy on the nose, not just normal wear. Floor plates, auger flights, and conveyor chain and bar sets take the next heaviest abuse from hot abrasive mix, so check for warped plates, pointed flights, and chain sag.
Wheel or track undercarriage, and what wears on it?
Documentation on this exact badge is thin and inconsistent on whether a given BG500E runs a rubber-tracked or a wheeled undercarriage, so confirm off the data plate and serial number before ordering undercarriage parts. Community discussion of pavers this size generally frames it as the classic tracks-versus-tires tradeoff: tracked machines carry more wear points (bogies, drive and idler wheels, track band, bearings) and get punished hard by roading between jobs, while wheeled machines wear through solid rear drive tires and front bogie wheels but have fewer total wear items overall. Either way, front bogie wheel wear from turning under load is the main visual tell of undercarriage age.
Any known electrical or sensor issues on this era of Cat mid-size paver?
Screed heat circuits are the most reported nuisance across this generation: corroded or loose heater-element connections and out-of-calibration screed temperature sensors cause uneven mat heat before paving starts. The heating control logic is built to keep paving if a single screed temperature sensor drops out, holding the last known reading for that zone, so a no-heat complaint on only one section usually traces to one sensor or connector rather than the whole harness. Have your dealer verify sensor readings against a handheld pyrometer before replacing heater elements.
What should you check specifically before buying a used BG500E?
Confirm the C4.4 ACERT starts cold without excessive smoke and pulls clean on the dealer diagnostic tool with no stored fault codes. Measure screed plate thickness at all four corners and compare side to side for alignment wear. Check auger and conveyor bearings by hand for play, and inspect flights and chain for pointing or sag from abrasive wear. Confirm whichever undercarriage the machine actually has off the data plate, then inspect bogie and tire or track wear accordingly. Cross-check total hours against how much is idle time versus actual paving time, since pavers commonly log heavy idle hours that inflate the meter relative to real wear. Have your dealer pull full service history and verify hydraulic pressure on all feed circuits before final offer.
Is thin community documentation for this exact model a red flag?
No. The BG500E shares its C4.4 ACERT driveline and B5E serial-prefix family with sibling badges that get most of the public specalog and brochure attention, so BG500E-specific write-ups are scarce online. That mirrors other Cat badge-twin pavers where one badge carries the marketing push while a twin rides the same chassis with thinner published coverage, not evidence of a rare or troubled machine.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific BG500E part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.