Caterpillarasphalt paver
Caterpillar BG-655D
Maintenance schedule, common problems & OEM parts breakdown
The Cat BG-655D is a rubber-tracked, highway-class asphalt paver built around a Cat C6.6 ACERT turbocharged diesel meeting Tier 3/Stage IIIA emissions, rated around 130 kW (174 hp). Operating weight with screed fitted runs about 19,165 kg (42,252 lb), varying with the screed and options installed. It rides on a Mobil-trac rubber-belted track undercarriage with hydrostatic propel, pairing crawler flotation and traction with wheel-paver ride quality. Production spanned roughly the late 2000s into the mid-2010s. The BG-655D is a badge-twin of the AP-655D paver, sharing the same chassis, C6.6 ACERT engine, Mobil-trac undercarriage, and operating weight under a different model nameplate rather than as a separate design. It was offered with a range of screeds from the AS2252C, AS3251C, and AS4251C family to match paving-width and hopper-capacity requirements.
Within this generation the core driveline stayed consistent, but screed pairing and control/electronics packages varied by market and dealer configuration, and buyers will find machines badged either BG-655D or AP-655D covering the same hardware. Later Cat pavers reissued the bare AP655/AP655F designation on a Tier IV C4.4/C7.1 platform, a separate later generation rather than a direct, unhedged successor to the BG-655D/AP-655D pair. In the used and parts market, the BG-655D matters because its Mobil-trac belts, hydrostatic propel components, and integrated screed-heating generator are the highest-wear, highest-value service items, and because its dual model nameplate means parts lookups and service history should be cross-checked under both BG-655D and AP-655D to avoid missing compatible components.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar BG-655D specifications
Engine
| Engine model | Cat C6.6 with ACERT, 6-cylinder inline diesel |
| Displacement | 6.6 L (403 cu in), bore 105 mm (4.13 in) x stroke 127 mm (5.00 in) |
| Gross power | 130 kW (174 hp) |
| Emissions tier | U.S. EPA Tier 3, EU Stage IIIA, Japan MOC Step 3 |
Weights
| Operating weight with screed | 19,165 kg (42,252 lb); some spec compilations show up to 19.89 t (43,780 lb) depending on screed and options fitted |
| Shipping weight | Not published in available spec sheets — verify with dealer for a specific serial/configuration |
| Ground pressure | Not published for this model |
Dimensions
| Transport width | 3.31-3.32 m (10.86-10.90 ft) |
| Transport height | 2.92-2.93 m (9.58-9.60 ft) |
| Transport length | 6.16-6.80 m (20.2-22.3 ft), varies with push roller and screed size fitted |
| Tractor operating width | 3.31 m (10.83 ft) |
| Ground clearance | Not published for this model |
Performance
| Maximum travel speed | 14.5 km/h (9 mph) |
| Paving speed | Up to 77.7 m/min (255 ft/min) |
| Standard paving width | 2.55-5.0 m (8.17-16.40 ft) |
| Paving width range (with extensions) | 1.83-8.02 m (6-26.3 ft) minimum to maximum |
| Hopper capacity | Approx. 6.5 m3 (13.4 t) per factory spec sheet — treat as approximate, not cross-verified across multiple independent sources |
Service capacities (summary)
| Fuel tank | 291-291.5 L (76.9-77 gal) |
| Hydraulic system | Not published in available spec sheets |
| Engine oil | Not published in available spec sheets |
| Cooling system | Not published in available spec sheets |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
BG-655D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat C6.6 ACERT turbo diesel | Not documented for this exact machine in the sources found; the C6.6 ACERT engine family typically fills at roughly 17.5-19 L (4.6-5 gal) with filter - confirm against the data plate/OMM before servicing | Cat DEO (Diesel Engine Oil) or equivalent heavy-duty diesel oil meeting API CI-4/CJ-4. Use a lighter multigrade (10W-30) in cold climates and 15W-40 in temperate to hot climates per the standard Cat viscosity-by-ambient-temperature chart. |
| Cooling system | Not documented for this exact machine in the sources found - verify with dealer/OMM | Cat ELC (Extended Life Coolant) or equivalent heavy-duty glycol-based antifreeze/coolant, standard fill for the C6.6 ACERT engine. |
| Fuel tank | approximately 291 L (77 US gal); one source lists 278 L (73 US gal) - varies by configuration/series, treat as a range | Ultra-low sulfur diesel (ULSD) fuel only. |
| Hydraulic system / hydraulic tank | 239 L (63 US gal) tank | Cat TDTO (Transmission/Drive Train Oil) or Cat HYDO Advanced meeting the Cat TO-4 specification, shared hydraulic/propel circuit. Viscosity by climate: lighter SAE 10W grade in cold ambient conditions, SAE 30 in temperate ranges, SAE 50 or 15W-40 in hot climates - match to the Cat TDTO viscosity-by-temperature chart for exact cutoffs. |
| Transmission / hydrostatic propel drive | Shares the hydraulic reservoir on this hydrostatic-propel paver; no separate transmission sump is documented | Same Cat TO-4 spec fluid as the hydraulic system (Cat TDTO); also compatible with Allison C4 spec equipment. |
| Final drives (each side, steel-track/Mobil-trac undercarriage) | approximately 4.3 L (1.1 US gal) each, per a lubrication cross-reference guide - not confirmed against the factory OMM, verify before service | Cat TO-4 Transmission/Drive Train Oil (TDTO), same product family used in the hydraulic/transmission circuit. |
| Grease (all fittings, spec only) | N/A - grease-gun application, no reservoir capacity | NLGI Grade 2 multipurpose lithium-complex EP grease, equivalent to Cat MPGM (Multipurpose Grease). |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar BG-655D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the BG-655D beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S oil sampling on the C6.6 ACERT at every oil change to catch bearing or injector wear before failure. Sample hydraulic oil regularly since the single tank feeds both hydrostatic propel and screed functions, so contamination affects steering and paving quality together. Track coolant condition on the ELC system rather than changing on a fixed guess. Log Mobil-trac belt tension and tracking trends at each interval; drift often precedes a torn or de-tracked belt.
Corrective & Common Repairs
Hydrostatic propel motor seal leaks and uneven tracking speed are the most common drivetrain complaints on this chassis. Mobil-trac belts lose tension and wander when idler or tensioning cylinders wear, so check tracking before blaming the belt itself. Screed heating generator brush wear causes uneven mat temperature and slow heat-up. Fuel filters clog faster than average on paving sites due to ambient dust and asphalt fume residue, so check them more often than the base interval suggests.
Overhaul & Rebuild Points
Plan hydrostatic pump and drive motor rebuilds around efficiency loss rather than a fixed hour number; declining propel response under load is the trigger. Mobil-trac drive sprockets, bogie wheels, and idlers wear as a set and are best rebuilt together rather than piecemeal. The C6.6 ACERT turbocharger and screed heating generator (bearings, brushes, slip rings) are the other major overhaul items on machines working past the 6,000-hour mark.
Seasonal & Environment Servicing
Cold climates demand block heater use and cold-weather fuel conditioning for the C6.6 ACERT, plus closer monitoring of the screed heating generator load during warm-up. Mobil-trac rubber belts stiffen in sub-freezing temperatures and soften in extreme heat, so adjust tension checks seasonally rather than on a fixed schedule. Hot, dusty paving sites shorten engine air filter and fuel filter life, and tank condensation checks matter most across seasonal temperature swings between the fuel and hydraulic tanks.
BG-655D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 271-9385 | Filter-Fuel | Fuel system service | Check fitment → |
| 276-3905 | Filter As-Fuel | Fuel system service | Check fitment → |
| 299-8229 | Filter-Fuel | Fuel system service | Check fitment → |
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
BG-655D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| E360 | Low Engine Oil Pressure event | Oil pressure at the sensor drops below the engine's programmed trip point for the current rpm; usually low oil level, worn oil pump, plugged filter, or a failing pressure sensor. | Stop the engine, check oil level and filter condition first, then verify sensor wiring before condemning the pump. |
| E361 | High Engine Coolant Temperature event | Coolant temperature exceeds the ECM's normal operating trip point; commonly low coolant, a blocked radiator or fan drive, a stuck thermostat, or a failing water pump. | Shut down safely, let the engine cool, then check coolant level and clear debris from the radiator and fan before restarting. |
| E2143 | Low Engine Coolant Level event | Coolant level sensor in the recovery tank reads below the safe threshold; typically an external leak, a blown hose, or a failed level sensor. | Inspect for visible coolant leaks and top off with the correct coolant spec; replace the level sensor if the level checks full but the code persists. |
| E96 | High Fuel Pressure event, rail pressure above roughly 650 kPa (94 psi) trip point | Fuel pressure regulator stuck closed, or the rail pressure sensor reading incorrectly high. | Check for a sticking regulator and confirm rail pressure sensor wiring and calibration before replacing the regulator. |
| E198 | Low Fuel Pressure event, rail pressure below roughly 140 kPa (20 psi) trip point | Restricted or clogged fuel filter, air in the fuel system, a weak low-pressure transfer pump, or a failing rail pressure sensor. | Replace fuel filters, bleed air from the system, and check transfer pump output before condemning the sensor. |
| CID 0100 FMI 03/04 (MID 036) | Engine Oil Pressure Sensor circuit, voltage above (03) or below (04) normal | Open or shorted wiring at the oil pressure sensor connector, or a failed sensor. | Inspect the sensor connector and harness for corrosion or damage, test sensor supply voltage, replace the sensor if wiring checks good. |
| CID 0110 FMI 03/04 (MID 036) | Engine Coolant Temperature Sensor circuit, voltage above or below normal | Damaged sensor wiring, corroded connector pins, or a failed coolant temperature sensor. | Check connector and harness continuity, verify sensor resistance against spec, replace the sensor if out of range. |
| CID 0168 FMI 02 (MID 036) | Electrical System Voltage, erratic or intermittent supply | Loose or corroded battery terminals, a failing alternator, or a bad ground connection feeding the ECM. | Check battery terminals and main ground straps, load-test the battery, verify alternator charging output. |
| CID 0190 FMI 08 (MID 036) | Engine Speed/Timing Sensor, abnormal frequency or pulse signal | Incorrect sensor air gap, a damaged timing ring tooth, or a corroded sensor connector. | Check and reset sensor air gap to spec, inspect the timing ring for damage, clean and inspect the connector. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
BG-655D attachments & work tools
Screed family (AS-series)
BG-655D/AP-655D (D-series, Tier 3, GNN/GNZ prefixes) pairs with the AS-family vibratory screed line: AS2252C, AS3251C, and AS4251C. These are bolt-on/pinned tow-arm screeds, not the newer SE-series screeds used on the later F-series AP655F/AP600F refresh — do not cross-mix screed lines between generations.
AS2252C screed
Base extending screed with narrow front-mounted extenders using 229 mm (9 in) wide plates. Positioned as the commercial/lighter-duty option in the class, reducing handwork on width changes.
AS3251C screed
Rear-mounted, hydraulically driven extenders with heavy-duty support tubes for stable material flow. Aimed at highway and street work where wider consistent mats are needed.
AS4251C screed
Double-width, hydraulic power-extending screed with 400 mm (15 in) main and extender plates. Offered with variable-frequency tamper and vibrator, and with a choice of LPG or electric heat. Standard paving range runs roughly 2.55-5.0 m, extendable toward 7.0 m depending on heat/extender configuration — varies by configuration.
Screed heating system
Screed plates are electrically heated off a tractor-mounted generator (documented around 25 kW at 60 Hz for this class) or, on the AS4251C, an LPG-fired alternative. Heat source is a factory-order option tied to the screed selection, not a field retrofit.
Screed mounting / extender actuation
Extenders are not a universal quick-coupler system: front extenders on AS2252C bolt to the main screed rails, while rear extenders on AS3251C/AS4251C are hydraulic-cylinder actuated and slide on support tubes for on-the-fly width changes. The screed itself pins to the tractor's leveling/pull arms.
Grade and slope control
Factory-compatible with Cat Grade Control sensing: sonic averaging beam and rigid mechanical ski, offered in 9.15 m (30 ft) and 12.2 m (40 ft) lengths. Sensors mount via a standard mounting cup or a snap-connector bracket; sonic and contact-type feed sensors are also used for automatic material-level control at the hopper.
Material feed system (augers/conveyors)
Left and right conveyors and left and right augers are each independently controlled, removing the need for mechanical feeder gates. Auger assemblies are hydraulically height-adjustable (roughly 215 mm / 8.5 in of travel) and bolt-on auger extensions are used for wider paving passes; conveyor drive motors and reducers are outboard-mounted to keep the tunnel area clear and limit segregation.
Push rollers
Standard equipment is an oscillating push roller with several pivot positions to line up with different truck fleets. A hydraulic push roller with roughly 203 mm (8 in) of powered adjustment is offered as an option for tight or mixed-fleet truck spacing.
Operator platform
Twin (left/right) operating stations with three working heights — hopper-level for loading visibility, mid-level for auger-chamber/screed view, and screed-level for fine control. Rear walkway folds for transport and can take optional sliding extensions for better sightlines; an operator-presence interlock is used to enable travel/paving functions.
Undercarriage
Runs on the Mobil-trac rubber-belted track system (steel-cable-reinforced rubber belt), offered with smooth or tread-bar belt patterns. This is the defining chassis feature separating the BG-655D/AP-655D from the wheeled AP600-class pavers in the same broader lineup.
Telematics
Factory-fit basic Product Link control group (unprogrammed at the factory, dealer-activated) is documented in the parts breakdown for this model — consistent with the base cellular telematics offered on this Tier 3-era generation rather than later Product Link Elite hardware.
Ancillary options
Class-typical dealer-order options for this paver size include a truck hitch, washdown tank and pump/reel kit, and front ballast weights. These are common across the D-series large-paver family; confirm exact availability with a dealer for a specific serial range.
All BG-655D assemblies by section
Every catalogued assembly group for the Caterpillar BG-655D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
270-8357 Air Cleaner Gp
| 21***81 | Cover As | 1 |
| 22***63 | Valve As-Air | 1 |
| 25***02 | Filter Element As-Air; (Primary) | 1 |
270-4254 Air Cleaner Gp
| 06***93 | Clamp-Tubing | 1 |
| 10***05 | Elbow; (90 Degree) | 1 |
| 14***11 | Adapter-Filter | 1 |
270-4255 Exhaust Gp-Flexible
| 06***93 | Clamp-Tubing | 2 |
| 13***49 | Cable As | 2 |
| 24***93 | Muffler | 1 |
288-3582 Manifold Gp-Inlet
| 23***88 | Gasket-Inlet | 1 |
| 27***02 | Dowel | 2 |
| 27***74 | Elbow As-Air Inlet | 1 |
285-3414 Turbocharger Gp
| 03***47 | Ferrule | 3 |
| 03***14 | Nut; (7/16-In) | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
Basic Engine
279-8837 Camshaft Gp
| 1B***36 | Key-Woodruff | 1 |
| 27***25 | Tappet | 12 |
| 27***26 | Rod-Push | 12 |
282-2827 Cover Gp-Cylinder Block
| 22***22 | Plug-Cup | 1 |
| 27***74 | Plate As-Blk | 1 |
| 27***75 | Seal-O-Ring | 1 |
277-4224 Cover Gp-Engine -Auxiliary Drive
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 27***23 | Plug | 1 |
282-2825 Cover Gp-Valve Mechanism
| 03***20 | Clip | 2 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 12***81 | Clip | 1 |
279-8762 Crankshaft Gp
| 1B***36 | Key-Woodruff | 1 |
| 22***39 | Dowel | 1 |
| 27***87 | Crankshaft Kt | 1 |
279-8711 Cylinder Block Gp
| 20***19 | Bolt; (M8x1.25x16-mm) | 8 |
| 27***11 | Cylinder Block Group | 1 |
| 29***86 | Housing-Rear | 1 |
306-6845 Cylinder Block Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 5 |
| 10***41 | Bolt; (M6x1x10-mm) | 6 |
| 18***84 | Dowel | 2 |
309-6663 Cylinder Head As
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 27***16 | Plug-Core | 6 |
279-8821 Cylinder Head Gp
| 17***41 | Head-Gasket | 1 |
| 27***34 | Bolt-Special; (Cylinder Head) | 14 |
| 27***21 | Cylinder Head Group | 1 |
270-4259 Drain Gp-Engine Oil
| 15***55 | Adapter | 1 |
| 16***35 | Plug As | 1 |
| 20***28 | Hose As | 1 |
291-2513 Drain Gp-Engine Oil
| 27***83 | Seal; (Sump Drain Plug) | 1 |
| 29***13 | Drain Group-Engine Oil | 1 |
| 7C***51 | Plug-Drain; (Engine Oil) | 1 |
289-3265 Drive Gp-Fan
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 28***26 | Pulley | 1 |
| 28***60 | Belt-Serpentine | 1 |
285-2000 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 12 |
| 10***31 | Flywheel As | 1 |
284-0892 Housing Gp-Flywheel
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 19***09 | Plug | 1 |
277-3014 Housing Gp-Front
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
279-9653 Lifting Gp-Engine
| 27***51 | Plate-Lifting | 1 |
| 27***52 | Plate-Lifting | 1 |
| 27***53 | Lifting Group-Engine | 1 |
300-4431 Mounting Gp-Engine
| 27***90 | Bracket-Mounting | 2 |
| 28***01 | Bolt | 2 |
| 28***02 | Bolt | 6 |
270-4250 Mounting Gp-Engine Flexible
| 15***12 | Mount As | 2 |
| 23***44 | Support As | 1 |
| 23***45 | Support As | 1 |
300-4439 Pan Gp-Oil
| 10***90 | Plug | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 27***83 | Seal; (Sump Drain Plug) | 1 |
279-8780 Piston & Rod Gp
| 12***36 | Ring-Retaining | 2 |
| 22***39 | Bolt-Special; (Connecting Rod) | 2 |
| 27***75 | Piston As | 6 |
277-5007 Plug Gp-Engine
| 27***07 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
291-4135 Pulley Gp-Crankshaft
| 27***30 | Damper | 1 |
| 27***31 | Pulley | 1 |
| 27***32 | Hub | 1 |
291-4136 Pulley Gp-Fan
| 27***31 | Pulley | 1 |
| 29***36 | Pulley Group-Fan | 1 |
| 29***47 | Adaptor | 1 |
280-1911 Rocker Arm Gp
| 27***00 | Plug-Shaft End | 1 |
| 27***01 | Circlip | 1 |
| 27***06 | Spring-Shaft | 5 |
279-8825 Valve Mechanism Gp
| 27***27 | Link | 12 |
| 27***25 | Valve Mechanism Group | 1 |
| 28***11 | Rocker Arm Group | 1 |
Braking System
276-5455 Accumulator Gp-Brake -Charged
| 11***87 | Screw | 1 |
| 11***88 | Seal; (O-Ring) | 1 |
| 11***89 | Cap | 1 |
193-8539 Pump & Valve Gp-Brake -Manual Release
| 19***39 | Pump & Valve Group-Brake; -Manual Release | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
229-9476 Pump Gp-Hand -Manual Brake Release
| 22***15 | Kit-Seal; (Check Valve)(Manual Brake Release Hand Pump) | 1 |
| 22***76 | Pump Group-Hand; -Manual Brake Release | 1 |
| 23***43 | Knob | 1 |
Controls
102-2703 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 1 |
| 10***47 | Gear-Worm | 1 |
| 10***50 | Guide-Bushing | 1 |
253-4752 Adjuster Gp-Height
| 10***24 | Tube As; (Vertical) | 4 |
| 10***39 | Key-Square | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
276-4579 Adjuster Gp-Height
| 10***03 | Adjuster Group-Height; -Manual | 2 |
| 10***04 | Bolt-Shoulder | 2 |
| 10***24 | Tube As; (Vertical) | 4 |
197-9844 Chain Gp-Screed
| 10***87 | Link-Connecting | 1 |
| 19***33 | Link-Offset | 1 |
| 19***44 | Chain Group-Screed | 1 |
277-9935 Control Gp-Thickness -Ccw, Acme
| 27***83 | Film-Instruction; (Mat Thickness, Ccw To Increase) | 2 |
| 27***35 | Control Group-Thickness; -Rh Thread | 1 |
| 28***94 | Shaft As | 2 |
277-9934 Control Gp-Thickness -Cw, Acme
| 27***84 | Film-Instruction; (Mat Thickness, Cw To Increase) | 2 |
| 27***34 | Control Group-Thickness; -Lh Thread | 1 |
| 28***90 | Shaft As | 2 |
287-0326 Control Gp-Thickness -Cw, Acme
| 27***84 | Film-Instruction; (Mat Thickness, Cw To Increase) | 2 |
| 28***26 | Control Group-Thickness; -Lh Thread | 1 |
| 28***26 | Shaft As | 2 |
287-0327 Control Gp-Thickness -Ccw, Acme
| 27***83 | Film-Instruction; (Mat Thickness, Ccw To Increase) | 2 |
| 28***27 | Control Group-Thickness; -Rh Thread | 1 |
| 28***24 | Shaft As | 2 |
290-1628 Crown Gp-Power
| 10***39 | Key-Square | 1 |
| 11***50 | Sprocket; (12-Teeth) | 1 |
| 18***45 | Boss; (12.7x25.4x15.7-mm Thk) | 2 |
276-4590 Crown Gp -Basic
| 10***01 | .. Roller, Bearing | 2 |
| 10***38 | Pointer | 1 |
| 10***39 | Key-Square | 1 |
196-2503 Jack Gp-Height Adjuster
| 10***64 | Bearing-Thrust | 2 |
| 11***49 | Worm | 1 |
| 19***03 | Jack Group-Height Adjuster | 1 |
102-2699 Jack Gp-Sloper
| 10***99 | Jack Group-Sloper | 1 |
| 10***46 | Gear-Worm | 1 |
| 10***49 | Guide-Bushing | 1 |
277-2006 Motor Gp-Power Adjuster
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
277-2004 Motor Gp-Power Adjuster
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
277-2005 Motor Gp-Power Adjuster
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
197-9850 Shaft Gp-Drive
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***12 | Spindle As | 1 |
197-9849 Shaft Gp-Drive
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***45 | Spindle As | 1 |
282-7961 Shaft Gp-Drive -Non-Actuated
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 28***61 | Shaft Group-Drive; -Non-Actuated | 1 |
276-4573 Sloper Gp-Power
| 06***93 | Lockwasher-Bearing | 2 |
| 10***99 | Jack Group-Sloper | 2 |
| 10***00 | . Axle, Rod End | 2 |
Cooling System
281-8748 Connection Gp-Water
| 10***87 | Bolt; (M10x1.5x85-mm) | 1 |
| 12***99 | Bolt; (M10x1.5x40-mm) | 1 |
| 28***44 | Gasket-Water Regulator; (Temperature) | 1 |
326-7401 Cooler Gp-Engine Oil
| 27***00 | Gasket-Housing | 1 |
| 28***39 | Cooler-Oil; (Engine) | 1 |
| 28***40 | Gasket | 1 |
281-7381 Cooler Gp-Engine Oil
| 22***44 | Gasket; (Engine Oil Filter Base) | 3 |
| 23***51 | Plate; (Blanking) | 2 |
| 27***38 | Gasket | 2 |
277-2939 Pump Gp-Water
| 11***29 | Bolt; (M8x1.25x75-mm) | 7 |
| 22***38 | Seal-O-Ring | 1 |
| 22***19 | Gasket | 1 |
270-4257 Radiator & Hyd Oil Cooler Gp
| 00***64 | End; (Hose) | 1 |
| 00***70 | Tee-Pipe | 1 |
| 03***39 | Connector | 1 |
333-7770 Radiator & Hyd Oil Cooler Gp
| 31***15 | Radiator As | 1 |
| 31***16 | Cooler As-Oil; (Hydraulic) | 1 |
| 33***70 | Radiator & Hydraulic Oil Cooler Group | 1 |
Electrical And Starting System
3e-6328 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
285-3080 Alternator Gp-Charging
| 10***51 | Bolt; (M8x1.25x130-mm) | 1 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 1 |
| 14***83 | Bolt; (M10x1.5x45-mm)(Starter Motor) | 2 |
269-8366 Battery & Wiring Gp
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***03 | Plate-Cover | 7 |
| 10***00 | Terminal As-Battery; (Remote Jump Start, Positive) | 1 |
262-4101 Electrical Ar
| 26***01 | Electrical Ar | 1 |
| 26***65 | Console Group-Operator | 1 |
| 26***66 | Battery & Wiring Group | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
316-2543 Electronics Gp-Machine
| 31***43 | Electronics Group-Machine; -Operator Control | 1 |
| 32***19 | Software Group-Machine; (Master Operator Station Ecm) | 1 |
| 32***20 | Service Group-Machine; (Master Operator Station Ecm) | 1 |
316-2544 Electronics Gp-Machine
| 31***44 | Electronics Group-Machine | 1 |
| 32***59 | Software Group-Machine | 1 |
| 32***61 | Service Group-Machine | 1 |
316-3351 Electronics Gp-Monitor
| 31***51 | Electronics Group-Monitor | 1 |
| 32***83 | Software Group-Monitor | 1 |
| 32***84 | Service Group-Monitor | 1 |
231-1332 Generator Gp
| 23***32 | Generator Group | 1 |
289-5220 Generator Gp
| 23***32 | Generator Group | 1 |
| 27***63 | Plate | 1 |
| 28***20 | Generator Group; -Hydraulic | 1 |
270-5315 Generator Gp
| 14***11 | Plug Group | 1 |
| 16***80 | Plug As. | 1 |
| 16***16 | Plug As | 1 |
277-4410 Glow Plug Gp
| 10***38 | Bolt; (M6x20-mm) | 1 |
| 27***28 | Insulator | 1 |
| 27***08 | Cable As | 1 |
294-8412 Harness As-Engine
| 21***39 | Strap-Cable | 4 |
| 26***41 | Harness As-Engine | 1 |
| 27***09 | Bracket | 1 |
311-6865 Installation Gp-Communication -Product Link
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
| 30***89 | Antenna; (Flexible), Captive Washer Cap Screw; 1/2 - 13 X 4 3/4 In., Captive Washer Cap Screw, Screw, Captive Washe; 1/2-13 X 4 3/4" | 1 |
234-4323 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***23 | Lamp Group-Flood; -Vertical Mount | 1 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
276-1830 Lighting Gp-Flood
| 23***23 | Lamp Group-Flood; -Vertical Mount | 4 |
| 27***30 | Lighting Group-Flood | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 2 |
198-8284 Lighting Gp-Warning Beacon
| 03***14 | Screw; (10-32x1-In) | 3 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 11***20 | Tube As | 1 |
258-6918 Mounting Gp-Sensor -Sonic Sensor
| 25***18 | Mounting Group-Sensor; -Sonic Sensor | 1 |
| 28***75 | Collar | 4 |
| 28***79 | Washer; (32.5x63.5x7.1-mm Thk) | 2 |
326-6194 Panel Gp-Circuit Breaker
| 11***18 | Clip | 3 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 2 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
292-7947 Panel Gp-Circuit Breaker
| 10***84 | Relay As; (24-Volt) | 1 |
| 22***00 | Circuit Breaker As; (25-Ampere)(Heated Mirror) | 1 |
| 23***72 | Strap As | 13 |
306-7612 Panel Gp-Power
| 19***06 | Strip-Terminal | 1 |
| 19***80 | Circuit Breaker As; (20-Ampere)(240-Volt Receptacle) | 1 |
| 19***75 | Receptacle | 2 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
330-6085 Sensor & Mounting Gp
| 10***49 | Plate | 2 |
| 13***21 | Handle | 4 |
| 14***10 | Collar | 2 |
198-8279 Sensor Gp-Auger
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 11***07 | Knob | 2 |
| 12***44 | Paddle As | 2 |
195-8090 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 19***90 | Sensor Group-Position; -Steering | 1 |
294-0112 Sensor Gp-Position
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***24 | Clamp | 2 |
| 16***41 | Support-Sensor | 2 |
219-2385 Sensor Gp-Position
| 12***50 | Receptacle As | 1 |
| 12***51 | Bushing | 1 |
| 12***52 | Clamp As-Cable | 1 |
160-2443 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
| 3E***71 | Wedge; (Receptacle Lock) (3 Pin) | 1 |
284-8876 Sensor Gp-Position
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 28***76 | Sensor Group-Position | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
145-7028 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***28 | Sensor Group-Temperature; -Hydraulic Oil Temp | 1 |
| 15***43 | Sleeve; (2.8-Dm) | 0 |
322-9153 Sensor Gp-Temperature
| 1F***13 | Locknut; (3/4-In) | 2 |
| 23***80 | Fitting; (Pipe) | 1 |
| 32***51 | Fitting | 1 |
322-9152 Sensor Gp-Temperature
| 18***55 | Fitting-Pipe | 1 |
| 1F***13 | Locknut; (3/4-In) | 2 |
| 32***51 | Fitting | 1 |
334-7882 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
296-1288 Electronics Gp-Machine
| 29***88 | Software Group-Implement | 1 |
| 32***35 | Software Group-Machine | 1 |
| 33***58 | Service Group-Machine | 1 |
292-7884 Starting Motor Gp-Electric
| 10***78 | Bolt; (M10x1.5x55-mm) | 2 |
| 29***59 | Starting Motor-Electric | 1 |
| 29***60 | Bolt | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
8n-0694 Switch As-Toggle
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 6T***31 | Nut-Hexagon-(15/32-32 Thd) | 2 |
| 6T***32 | Lockwasher 15.08mm(.59in.)O.D. | 1 |
172-8660 Switch Gp-Liquid Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
175-2309 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***81 | Switch As-Magnetic; (Start Relay) | 1 |
167-0138 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
175-2308 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
118-3534 Switch Gp-Magnetic
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
| 17***09 | Switch Group-Magnetic; -24-Volt-Start Relay | 1 |
165-5970 Switch Gp-Toggle
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
269-8370 Wiring Gp-Electronic Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 2 |
| 12***74 | Cover-Connector; (Wire Router) | 2 |
293-6541 Wiring Gp-Heater
| 10***05 | Plate | 10 |
| 15***83 | Clamp-Half | 4 |
| 17***15 | Strap; (Dual Clamp) | 2 |
276-4607 Wiring Gp-Heater
| 10***05 | Plate | 4 |
| 15***83 | Clamp-Half | 8 |
| 17***15 | Strap; (Dual Clamp) | 3 |
297-1002 Wiring Gp-Hydraulic Generator
| 13***00 | Clip; (Tab) | 1 |
| 29***02 | Wiring Group-Hydraulic Generator | 1 |
| 29***04 | Harness As-Solenoid | 1 |
269-8367 Wiring Gp-Machine -Lh
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 0L***07 | Grommet | 1 |
| 11***01 | Plate-Face | 2 |
269-8369 Wiring Gp-Machine -Rear
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 7 |
| 13***40 | Resistor As-Connection; (3-Pin) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
269-8368 Wiring Gp-Machine -Rh
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***01 | Plate-Face | 1 |
283-4417 Wiring Gp-Panel
| 19***81 | Circuit Breaker As; (35-Ampere)(Generator) | 1 |
| 24***09 | Plate | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
306-7603 Wiring Gp-Panel
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 12 |
| 25***11 | Relay As; (24-Volt)(Screed Control) | 4 |
| 27***12 | Plate As | 1 |
302-3912 Wiring Gp-Power Receptacle
| 19***81 | Circuit Breaker As; (35-Ampere)(Generator) | 1 |
| 24***09 | Plate | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
269-8371 Wiring Gp-Power Train
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 13***00 | Clip; (Tab) | 1 |
| 13***01 | Clip | 5 |
276-4552 Wiring Gp-Screed -Screed Extension
| 24***12 | Switch As-Toggle; (Right Extender Width Sw) | 3 |
| 26***84 | Bracket | 1 |
| 27***42 | Film-Identification; (Screed Extension) | 1 |
276-4606 Wiring Gp-Screed -24-Volt
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 24 |
| 13***00 | Clip; (Tab) | 10 |
| 13***89 | Clip; (Ladder) | 2 |
277-5772 Wiring Gp-Screed
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 4 |
| 27***72 | Wiring Group-Screed | 1 |
| 29***69 | Plate | 1 |
293-6625 Wiring Gp-Screed
| 06***44 | Grommet | 2 |
| 13***00 | Clip; (Tab) | 7 |
| 13***72 | Cover | 4 |
Electrical System
294-8232 Box Gp-Screed Control -Basic, Left
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
289-3575 Box Gp-Screed Control -Basic, Right
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***01 | Clip | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
294-8231 Box Gp-Screed Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
289-3576 Box Gp-Screed Control -Basic, Left
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***01 | Clip | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
Engine Arrangement
242-1319 Engine Ar-Primary
| 24***19 | Engine Ar-Primary | 1 |
| 27***12 | Filter Group-Engine Oil; -Engine | 1 |
| 27***39 | Pump Group-Water | 1 |
262-4106 Installation Ar-Engine
| 24***19 | Engine Ar-Primary | 1 |
| 26***06 | Installation Ar-Engine | 1 |
| 27***50 | Mounting Group-Engine Flexible | 1 |
Feeder Drag And Auger Conveyors
263-6001 Auger Gp
| 10***55 | Plate | 1 |
| 16***89 | Bolt-Hex Head; (M16x2x55mm) | 4 |
| 17***24 | Bar | 2 |
116-9509 Bearing Gp-Auger
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***09 | Bearing Group-Auger | 1 |
106-9718 Bearing Gp-Auger
| 01***41 | Setscrew-Socket | 3 |
| 10***18 | Bearing Group-Auger | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
201-5584 Bearing Gp-Auger
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
| 20***84 | Bearing Group-Auger | 1 |
280-9921 Chain Gp-Conveyor
| 28***21 | Chain Group-Conveyor | 1 |
| 28***79 | Bar-Side | 232 |
| 28***80 | Foam Insulation; 40 X 60 X 644 mm, Bar-Side | 116 |
262-4105 Conveyor Ar-Drag & Auger
| 19***48 | Conveyor Group-Drag | 2 |
| 21***70 | Footshaft Group | 2 |
| 26***05 | Conveyor Ar-Drag & Auger | 1 |
191-4421 Conveyor Gp-Auger
| 10***85 | Plate | 2 |
| 10***91 | Pipe | 2 |
| 10***96 | Plate | 1 |
192-5448 Conveyor Gp-Drag
| 05***20 | Pin-Spring | 58 |
| 12***46 | Bar-Feeder | 29 |
| 19***48 | Conveyor Group-Drag | 1 |
263-6007 Door Gp-Access
| 10***56 | Rod; (Prop) | 3 |
| 11***77 | Bumper-Rubber | 4 |
| 12***27 | Spacer; (9x14x3.5-mm Thk) | 2 |
263-6000 Drive Gp-Conveyor
| 10***99 | Sprocket As; (12-Teeth) | 2 |
| 13***92 | Key-Square | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
231-2042 Extension Gp-Auger -24-In, Rh
| 23***42 | Extension Group-Auger; -24-In, Rh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
243-0329 Extension Gp-Auger -18-In
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 23***32 | Extension Group-Auger; -6-In | 1 |
231-3532 Extension Gp-Auger -6-In
| 23***32 | Extension Group-Auger; -6-In | 1 |
| 31***84 | Tube | 2 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 2 |
198-8287 Extension Gp-Auger -12-In, Rh
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
231-2043 Extension Gp-Auger -24-In, Lh
| 23***43 | Extension Group-Auger; -24-In, Lh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
199-4206 Extension Gp-Auger -12-In, Lh
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
215-1870 Footshaft Gp
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
263-6002 Guard Gp-Conveyor
| 12***54 | Screw-Flat Head; (M12x1.75x35-mm) | 64 |
| 19***39 | Plate | 4 |
| 19***40 | Plate | 2 |
269-7123 Hydraulic Ar-Conveyor
| 23***97 | Motor & Mtg Group-Auger | 1 |
| 26***23 | Hydraulic Ar-Conveyor | 1 |
| 27***14 | Pump & Mtg Group-Conveyor | 1 |
270-7215 Motor & Mtg Gp-Conveyor
| 11***80 | Elbow | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***58 | Elbow As | 2 |
191-4411 Planetary Gp-Auger
| 09***92 | Pin-Spring | 2 |
| 13***16 | Kit-Washer; (Planetary) | 1 |
| 13***30 | Plug-Magnetic; (Planetary) | 1 |
192-7962 Planetary Gp-Conveyor
| 09***92 | Pin-Spring | 2 |
| 13***63 | Bearing | 1 |
| 16***54 | Seal | 1 |
270-7214 Pump & Mtg Gp-Conveyor
| 08***56 | 90 Degrees Elbow | 1 |
| 14***27 | Connector Group | 2 |
| 14***39 | Connector As. | 8 |
263-6003 Shaft Gp-Feeder Drive
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 4 |
| 10***30 | Bearing-Flange | 2 |
| 10***70 | Key-Square | 2 |
Frame And Body
300-9991 Arm Gp-Drop
| 13***20 | Shaft | 2 |
| 13***77 | Lockout | 2 |
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
276-4589 Arm Gp-Drop
| 10***68 | Nipple-Pipe | 2 |
| 11***99 | Pin As-Pivot | 2 |
| 13***77 | Lockout | 4 |
271-2815 Arm Gp-Tow
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 19***19 | Roller | 4 |
| 19***20 | Shaft | 2 |
263-5955 Arm Gp-Tow
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 19***19 | Roller | 4 |
| 19***20 | Shaft | 2 |
315-1101 Brace Gp
| 1A***68 | Nut | 1 |
| 31***01 | Brace Group | 1 |
| 31***02 | Plate As | 1 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
282-8500 Bracket Gp-Support
| 12***73 | Extension As | 2 |
| 12***20 | Shim; (1.65-mm Thk) | 4 |
| 24***82 | Plate | 4 |
232-1107 Bracket Gp-Support
| 22***51 | Bracket | 1 |
| 23***07 | Bracket Group-Support | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
263-6006 Bracket Gp-Support
| 13***49 | Cable As | 2 |
| 26***06 | Bracket Group-Support | 1 |
| 31***59 | Plate | 2 |
295-3079 Carriage Gp-Extender
| 16***39 | Bolt; (5/8-11x3.5-In) | 6 |
| 18***25 | Scraper; (Brass) | 6 |
| 19***57 | Scraper As | 6 |
272-2384 Cover Gp-Platform
| 27***43 | Cover | 2 |
| 27***84 | Cover Group-Platform | 1 |
| 9X***42 | Screw-Truss Head (M6x1.0x12mm); (M6x1.00x12mm) | 6 |
276-4582 Deflector Gp
| 10***31 | Nut-Spring | 8 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 8 |
| 12***80 | Locknut; (M12x1.75-Thd) | 18 |
231-1982 Extension Gp-Main Frame -12-In
| 10***88 | Extension As | 1 |
| 23***82 | Extension Group-Main Frame; -12-In | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
231-1983 Extension Gp-Main Frame -24-In
| 10***90 | Extension As | 1 |
| 23***83 | Extension Group-Main Frame; -24-In | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
215-7553 Extension Gp-Main Frame
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
279-2577 Flashing Gp
| 27***90 | Flashing | 2 |
| 27***42 | Plate | 2 |
| 27***50 | Flashing | 2 |
279-2576 Flashing Gp
| 15***74 | Bolt-Round Head; (M12x1.75x60-mm) | 5 |
| 25***07 | Bolt-Round Head; (M12x1.75x65-mm) | 1 |
| 27***62 | Flashing | 1 |
263-5949 Frame Gp-Main
| 26***49 | Frame Group-Main | 1 |
| 26***52 | Frame As | 1 |
273-4076 Frame Gp-Main
| 14***93 | Bolt; (M12x1.75x40-mm) | 8 |
| 27***76 | Frame Group-Main | 1 |
| 27***20 | Frame As; (Paver) | 1 |
295-3080 Frame Gp-Screed
| 19***12 | Plate | 2 |
| 1D***06 | Nut 13.89 mm (.546 In.) | 4 |
| 20***59 | Pin-Lock | 2 |
276-4604 Frame Gp-Screed
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
253-4735 Gate Gp-End
| 24***16 | Actuator Group | 4 |
| 25***35 | Gate Group-End | 1 |
| 25***29 | Support As; (Lh) | 1 |
276-4603 Gate Gp-End
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***47 | Washer | 2 |
| 24***16 | Actuator Group | 4 |
273-9969 Guide Gp-Steering
| 19***54 | Chain | 1 |
| 27***69 | Guide Group-Steering | 1 |
| 27***65 | Bar | 1 |
301-1468 Hitch Gp-Oscillating
| 19***08 | Bar | 2 |
| 19***09 | Pin As | 1 |
| 30***68 | Hitch Group-Oscillating | 1 |
272-2320 Hopper Gp
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 1 |
| 26***33 | Pin As | 1 |
| 27***32 | Plate As | 1 |
278-8234 Hopper Gp
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 1 |
| 26***33 | Pin As | 1 |
| 27***32 | Plate As | 1 |
263-6004 Hopper Gp
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
| 16***85 | Pin As | 2 |
270-2104 Lines Gp-Grease
| 14***20 | Connector As | 2 |
| 14***85 | Elbow; (45°) | 8 |
| 14***89 | Elbow As | 6 |
273-7452 Lines Gp-Grease
| 14***20 | Connector As | 2 |
| 14***85 | Elbow; (45°) | 8 |
| 14***89 | Elbow As | 6 |
263-5961 Lock Gp-Transport
| 25***97 | Bar | 2 |
| 26***61 | Lock Group-Transport | 1 |
| 31***09 | Plate | 2 |
276-4605 Plate Gp-Screed
| 26***54 | Shim; (2-mm Thk) | 4 |
| 27***05 | Plate & Heater Group-Screed; -Electric Heat | 1 |
| 29***23 | Nut-Adjustment; (1-1/4-12-Thd) | 44 |
295-3084 Plate Gp-Screed
| 18***31 | Bolt-Special; (1 1/4-12-2athd) | 4 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 21***69 | Stud | 4 |
273-1160 Plate Gp
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 1 |
| 26***33 | Pin As | 1 |
| 27***45 | Bar | 1 |
308-3130 Plate Gp-Screed
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***37 | Bracket; (Rh) | 16 |
| 25***01 | Plate-Main | 1 |
245-9077 Plate Gp-Screed -Electric Heat, 12-In
| 13***89 | Clip; (Ladder) | 1 |
| 24***57 | Plate | 1 |
| 24***77 | Plate Group-Screed; -Electric Heat, 12-In | 1 |
311-6561 Plate Gp-Screed
| 12***64 | Receptacle As-Connector; (1-Pin) | 1 |
| 25***75 | Bracket | 16 |
| 25***44 | Spacer; (14.86x19.05x12.5-mm Thk) | 8 |
308-3132 Plate Gp-Screed
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***37 | Bracket; (Rh) | 8 |
| 25***13 | Plate; (Lh Extender) | 1 |
308-3131 Plate Gp-Screed
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***37 | Bracket; (Rh) | 8 |
| 25***06 | Plate; (Extender, Rh) | 1 |
245-9078 Plate Gp-Screed -Electric Heat, 28-In
| 13***89 | Clip; (Ladder) | 2 |
| 24***60 | Plate | 1 |
| 24***78 | Plate Group-Screed; -Electric Heat, 28-In | 1 |
302-3944 Step Gp
| 30***44 | Step Group | 1 |
| 32***85 | Step As | 1 |
| 7F***88 | Pin | 2 |
269-9213 Structural Ar
| 26***55 | Arm Group-Tow | 1 |
| 26***61 | Lock Group-Transport | 1 |
| 26***13 | Structural Ar | 1 |
262-4108 Structural Ar
| 26***08 | Structural Ar | 1 |
| 26***61 | Lock Group-Transport | 1 |
| 27***15 | Arm Group-Tow | 1 |
231-1956 Support Gp-Frame
| 10***89 | Brace Group | 1 |
| 23***56 | Support Group-Frame | 1 |
| 23***07 | Bracket Group-Support | 1 |
263-6008 Suppression Gp-Sound
| 26***08 | Suppression Group-Sound | 1 |
| 27***51 | Insulation-Sound Suppression | 1 |
| 27***52 | Insulation-Sound Suppression | 1 |
270-6763 Ventilation Gp-Paver
| 12***96 | Seal; (1.084m) | 0 |
| 12***23 | Seal; (32-cm) | 0 |
| 14***00 | Inlet-Blower | 1 |
Fuel System
276-0079 Control Gp-Decelerator
| 26***48 | Pedal Group-Governor; -Electronic | 2 |
| 27***36 | Spacer | 2 |
| 27***79 | Control Group-Decelerator | 1 |
201-7654 Cover Gp-Fuel Tank
| 20***53 | Plate | 1 |
| 20***54 | Cover Group-Fuel Tank | 1 |
| 6V***98 | Bolt; (M5x0.8x16-mm) | 5 |
280-1394 Filter Gp-Secondary Fuel
| 27***85 | Filter-Fuel; (Element) | 1 |
| 27***05 | Filter As-Fuel; (Filter Head) | 1 |
| 28***94 | Filter Group-Secondary Fuel | 1 |
174-9570 Filter Gp-Water Sep & Fuel
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 27***20 | Bowl As; (Fuel, Water Separator) | 1 |
320-0677 Injector Gp-Fuel
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
| 32***77 | Injector Group-Fuel | 1 |
306-9380 Injector Gp-Fuel
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
| 30***80 | Injector Group-Fuel | 1 |
292-3780 Injector Gp-Fuel
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
| 29***80 | Injector Group-Fuel | 1 |
321-3600 Injector Gp-Fuel
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
| 32***00 | Injector Group-Fuel | 1 |
308-6532 Lines Gp-Fuel
| 10***16 | Bolt; (M6x16-mm) | 2 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 2 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
270-4256 Lines Gp-Fuel
| 10***05 | Plate | 3 |
| 10***54 | Connector-Orfs | 1 |
| 12***09 | Valve-Ball; (Hydraulic Tank Drain) | 1 |
303-2928 Pump Gp-Fuel Injection
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 15***76 | Mount-Isolation | 8 |
317-8021 Pump Gp-Fuel
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***72 | Fitting-Fuel | 1 |
| 22***00 | Seal-O-Ring | 2 |
291-5919 Pump & Mtg Gp-Unit Inj Hyd
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***72 | Fitting-Fuel | 1 |
| 22***00 | Seal-O-Ring | 3 |
323-3939 Pump Gp-Fuel Injection
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 15***76 | Mount-Isolation | 8 |
276-8398 Pump Gp-Fuel Injection
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***00 | Seal-O-Ring | 1 |
| 23***20 | Sensor Group-Speed; (Secondary, Timing) | 1 |
278-5319 Pump Gp-Fuel Injection
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 15***76 | Mount-Isolation | 8 |
212-3657 Pump Gp-Fuel Prm & Water Sep -Electric
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 21***57 | Pump Group-Fuel Prm & Water Sep; -Electric-Primary Filter | 1 |
| 21***39 | Filter Base Assembly; (24-Volt) | 1 |
305-6376 Tank Gp-Fuel
| 29***35 | Bulkhead | 1 |
| 29***36 | Nut-Bulkhead; (1-12-Thd, Lh) | 1 |
| 30***76 | Tank Group-Fuel | 1 |
Grade References
109-5624 Leveler Gp -30 Ft Over Screed
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5627 Leveler Gp -40 Ft Grade
| 10***04 | Tube; (1.1-M) | 1 |
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5628 Leveler Gp -30 Ft Grade
| 10***04 | Tube; (1.1-M) | 1 |
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5622 Leveler Gp -40 Ft Outboard
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5625 Leveler Gp -30 Ft Over Screed
| 08***09 | Bracket | 7 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5626 Leveler Gp -Outboard
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5623 Leveler Gp -30 Ft Outboard
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
Hydraulic System
303-4148 Cover Gp
| 14***11 | Plug Group | 1 |
| 16***80 | Plug As. | 1 |
| 16***16 | Plug As | 1 |
263-6005 Cover Gp
| 10***14 | Knob | 3 |
| 20***04 | Plate | 2 |
| 23***62 | Plate | 2 |
270-6764 Cover Gp
| 14***10 | Plug As; (16.36mm Id) | 1 |
| 20***34 | Plate-Cover | 1 |
| 27***64 | Cover Group | 1 |
273-9915 Cover Gp
| 10***14 | Knob | 3 |
| 20***04 | Plate | 2 |
| 23***62 | Plate | 2 |
270-7226 Cylinder & Mtg Gp-Auger
| 14***68 | Elbow Group | 4 |
| 17***51 | Pin-Clevis | 2 |
| 19***59 | Cylinder Group-Hydraulic; -Auger, Rh | 1 |
270-7223 Cylinder & Mtg Gp-Hopper
| 10***44 | Elbow | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
| 20***00 | Elbow As | 2 |
276-5032 Cylinder & Mtg Gp-Screed Hoist
| 14***68 | Elbow Group | 2 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 2 |
| 27***60 | Cylinder Group-Hydraulic; -Screed Hoist | 2 |
270-7224 Cylinder & Mtg Gp-Screed Hoist
| 14***74 | Elbow As | 2 |
| 16***88 | Elbow; (90-Deg) | 1 |
| 17***51 | Pin-Clevis | 4 |
270-7227 Cylinder & Mtg Gp-Tow Point
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 14***74 | Elbow As | 4 |
| 17***51 | Pin-Clevis | 2 |
8c-9493 Cylinder Gp-Hydraulic -Track Tension
| 2K***68 | Locknut | 1 |
| 4B***06 | Setscrew-Socket; (1/4-20x0.25-In) | 1 |
| 4K***86 | Seal (1.114" Inside Diameter) | 1 |
270-3560 Cylinder Gp-Hydraulic
| 25***75 | Ring-Retaining | 1 |
| 27***60 | Cylinder Group-Hydraulic; -Screed Hoist | 1 |
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 1 |
275-0895 Cylinder Gp-Hydraulic -Hopper
| 27***95 | Cylinder Group-Hydraulic; -Hopper | 1 |
135-0218 Cylinder Gp-Hydraulic -Extender
| 03***39 | Ring-Back-Up | 1 |
| 12***75 | Ring-Wear | 2 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 1 |
195-2884 Cylinder Gp-Hydraulic -Tow Point
| 19***84 | Cylinder Group-Hydraulic; -Tow Point | 1 |
| 23***82 | Kit-Seal; (Tow Point Cylinder) | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
194-7260 Cylinder Gp-Hydraulic -Auger, Lh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 19***60 | Cylinder Group-Hydraulic; -Auger, Lh | 1 |
| 23***18 | Kit-Seal; (Auger Cylinder, Lh) | 1 |
197-9766 Cylinder Gp-Hydraulic -Slope
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 14***61 | Plug | 2 |
| 14***62 | Seal-Washer | 2 |
194-7259 Cylinder Gp-Hydraulic
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 19***59 | Cylinder Group-Hydraulic; -Auger, Rh | 1 |
| 23***20 | Kit-Plug; (Auger Cylinder) | 1 |
270-4253 Drive Gp-Pump
| 00***46 | Elbow; (45 Degree Pipe) | 1 |
| 09***19 | Plug-Pipe | 1 |
| 14***12 | Adapter As | 2 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 17***15 | Filter Group-Oil; -Hydraulic Tank | 1 |
302-0421 Hydraulic Ar
| 27***62 | Lines Group-Truck Hitch | 1 |
| 27***65 | Valve & Mtg Group-Truck Hitch | 1 |
| 30***21 | Hydraulic Ar | 1 |
291-9138 Hydraulic Ar
| 25***27 | Cylinder & Mtg Group-Tensioner; -Track Tension | 1 |
| 27***30 | Valve & Mtg Group-Auxiliary | 1 |
| 27***40 | Valve & Mtg Group-Track Tensioner | 1 |
262-4112 Hydraulic Ar
| 24***85 | Plug As | 1 |
| 26***12 | Hydraulic Ar | 1 |
| 26***23 | Hydraulic Ar-Conveyor | 1 |
262-4102 Hydraulic Ar
| 26***02 | Hydraulic Ar | 1 |
| 26***22 | Hydraulic Ar-Propel | 1 |
| 26***23 | Hydraulic Ar-Conveyor | 1 |
270-6766 Hydraulic Ar
| 27***66 | Hydraulic Ar | 1 |
| 27***63 | Lines Group-Truck Hitch | 1 |
| 27***65 | Valve & Mtg Group-Truck Hitch | 1 |
269-7125 Hydraulic Ar-Auxiliary
| 26***25 | Hydraulic Ar-Auxiliary | 1 |
| 27***30 | Valve & Mtg Group-Auxiliary | 1 |
| 27***18 | Pump & Mtg Group-Auxiliary | 1 |
269-7126 Hydraulic Ar-Fan
| 26***26 | Hydraulic Ar-Fan | 1 |
| 27***50 | Pump & Mtg Group-Hydraulic Fan | 1 |
| 27***51 | Motor & Mtg Group-Hydraulic Fan | 1 |
269-7124 Hydraulic Ar-Vibratory
| 26***24 | Hydraulic Ar-Vibratory | 1 |
| 27***31 | Lines Group-Vibratory | 1 |
| 27***32 | Valve & Mtg Group-Vibratory | 1 |
270-7237 Lines Gp-Brake & Shift
| 10***05 | Plate | 4 |
| 11***47 | Hose As | 1 |
| 13***17 | Hose As | 1 |
270-3543 Lines Gp-Brake & Shift
| 10***05 | Plate | 3 |
| 11***47 | Hose As | 1 |
| 13***17 | Hose As | 1 |
270-7217 Lines Gp-Conveyor
| 10***43 | Hose As | 1 |
| 10***79 | Hose Assem. | 1 |
| 10***63 | Hose As | 1 |
270-7233 Lines Gp-Cylinder
| 10***05 | Plate | 3 |
| 10***45 | Clamp | 6 |
| 13***90 | Hose As | 1 |
295-3078 Lines Gp-Extender
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***36 | Elbow As. | 2 |
| 16***32 | Pin | 2 |
276-4585 Lines Gp-Extension
| 10***05 | Plate | 1 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 2 |
| 14***27 | Connector Group | 1 |
289-5222 Lines Gp-Generator
| 13***48 | Hose As; (Labeled F) | 1 |
| 14***09 | Hose As | 1 |
| 14***60 | Elbow Group | 1 |
270-7231 Lines Gp-Hopper
| 27***31 | Lines Group-Hopper | 1 |
| 27***51 | Hose As | 2 |
| 6R***28 | Hose As | 2 |
278-7739 Lines Gp-Hopper
| 10***03 | Plate-Cover | 5 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***77 | Elbow As. | 1 |
274-5856 Lines Gp-Hopper
| 10***03 | Plate-Cover | 5 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***77 | Elbow As. | 1 |
270-7253 Lines Gp-Hydraulic Fan
| 14***38 | Elbow | 1 |
| 14***12 | Reducer As-Orfs | 1 |
| 14***29 | Tee As-Orfs | 1 |
278-1868 Lines Gp-Paver Ventilation
| 14***58 | Elbow As | 1 |
| 17***15 | Strap; (Dual Clamp) | 1 |
| 19***35 | Hose As | 1 |
270-7242 Lines Gp-Pump
| 10***23 | Hose As | 1 |
| 17***20 | Strap-Dual Clamp | 2 |
| 27***42 | Lines Group-Pump | 1 |
270-3544 Lines Gp-Pump
| 10***23 | Hose As | 1 |
| 17***20 | Strap-Dual Clamp | 2 |
| 27***44 | Lines Group-Pump | 1 |
270-7244 Lines Gp-Return
| 15***36 | Hose As | 1 |
| 19***06 | Bolt-Stacking; (M6x1x64-mm) | 2 |
| 1P***82 | Flange-Half | 2 |
270-7229 Lines Gp-Screed
| 10***05 | Plate | 8 |
| 10***95 | Hose As | 1 |
| 14***57 | Clamp-Double | 4 |
270-7246 Lines Gp-Slope
| 10***05 | Plate | 3 |
| 15***28 | Union | 1 |
| 15***46 | Tee As | 2 |
253-4756 Lines Gp-Slope
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***84 | Pin As | 4 |
| 14***74 | Elbow As | 10 |
270-7236 Lines Gp-Track Tension
| 20***02 | Hose As | 1 |
| 21***56 | Hose As | 1 |
| 27***36 | Lines Group-Track Tension | 1 |
270-3542 Lines Gp-Track Tension
| 10***03 | Plate-Cover | 9 |
| 14***25 | Connector As. | 1 |
| 14***63 | Elbow Group | 1 |
273-2462 Lines Gp-Truck Hitch
| 10***03 | Plate-Cover | 5 |
| 10***05 | Plate | 1 |
| 13***18 | Tube As | 2 |
273-2463 Lines Gp-Hitch
| 10***03 | Plate-Cover | 5 |
| 10***05 | Plate | 1 |
| 13***18 | Tube As | 2 |
270-3531 Lines Gp-Vibratory
| 11***05 | Hose As; (Main Auxiliary Valve) | 1 |
| 14***26 | Hose As; (Vibe Valve Outlet) | 1 |
| 14***80 | Elbow As | 1 |
276-4584 Lines Gp-Vibratory
| 10***03 | Plate-Cover | 1 |
| 10***05 | Plate | 3 |
| 11***60 | Strap | 1 |
295-3083 Lines Gp-Vibratory
| 10***05 | Plate | 4 |
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***09 | Adapter As | 3 |
270-7249 Manifold Gp-Control
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***08 | Adapter As | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
230-9597 Motor & Mtg Gp-Auger
| 11***80 | Elbow | 1 |
| 14***27 | Connector Group | 4 |
| 14***72 | Elbow Group | 4 |
289-5224 Motor & Mtg Gp-Generator
| 14***19 | Connector As | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 20***11 | Valve-Check | 1 |
270-7251 Motor & Mtg Gp-Hydraulic Fan
| 14***17 | Adapter, -12 Orb / -16 Orfs | 2 |
| 14***65 | Elbow | 1 |
| 27***51 | Motor & Mtg Group-Hydraulic Fan | 1 |
270-7212 Motor & Mtg Gp-Propel
| 12***88 | Flange-Split | 4 |
| 12***47 | Elbow | 1 |
| 13***96 | Elbow | 1 |
255-4488 Motor & Mtg Gp-Propel
| 10***93 | Flange | 4 |
| 14***28 | Connector Assem. | 2 |
| 14***52 | Elbow As. | 4 |
278-0492 Motor & Mtg Gp-Ventilation
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***74 | Elbow As | 1 |
| 15***50 | Elbow As | 1 |
235-4849 Motor Gp-Gear
| 23***49 | Motor Group-Gear; -Paver Ventilation | 1 |
| 26***11 | Kit-Seal; (Paver Ventilation Motor) | 1 |
308-2125 Motor Gp-Gear
| 30***25 | Motor Group-Gear; -Vibratory | 1 |
| 31***08 | Kit-Seal | 1 |
190-8789 Motor Gp-Piston
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
285-2212 Motor Gp-Piston
| 07***53 | Pin; (Spring) | 2 |
| 11***34 | Bolt | 4 |
| 14***16 | Tube | 1 |
230-9384 Motor Gp-Piston -Conveyor
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
227-5104 Motor Gp-Piston -Generator
| 10***78 | Bearing-Roller | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
270-7218 Pump & Mtg Gp-Auxiliary
| 10***20 | Seal-O-Ring | 1 |
| 12***33 | Elbow | 1 |
| 14***45 | Connector As | 1 |
289-5221 Pump & Mtg Gp-Generator
| 10***20 | Seal-O-Ring | 1 |
| 14***72 | Elbow Group | 1 |
| 14***85 | Elbow; (45°) | 1 |
270-7250 Pump & Mtg Gp-Hydraulic Fan
| 27***50 | Pump & Mtg Group-Hydraulic Fan | 1 |
| 29***05 | Pump Group-Gear; (Hydraulic Fan) | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
270-7210 Pump & Mtg Gp-Propel
| 12***88 | Flange-Split | 8 |
| 14***15 | Connector As | 3 |
| 14***23 | Connector As. | 2 |
289-5227 Pump Gp-Piston
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
| 14***11 | Bolt-Socket Head; (M6x1x16-mm) | 1 |
| 23***60 | Pin-Slotted | 1 |
230-9385 Pump Gp-Piston -Auxiliary
| 00***91 | Cup-Roller Bearing | 1 |
| 07***35 | Kit-Bearing; (Auxiliary Pump) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
269-0533 Pump Gp-Piston
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 12 |
| 26***60 | Dowel | 4 |
| 26***33 | Pump Group-Piston; -Conveyor | 1 |
285-4088 Pump Gp-Piston
| 03***39 | Seal-O-Ring (Id=9.25mm) | 4 |
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
317-9349 Pump Gp-Piston
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 09***39 | Washer; (8.33x15x2.12-mm Thk) | 1 |
269-7127 Tank & Mtg Gp-Hydraulic
| 08***56 | 90 Degrees Elbow | 1 |
| 14***34 | Connector Group | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
270-7254 Tank Gp-Hydraulic
| 00***39 | Adapter-Pipe | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 14***28 | Sensor Group-Temperature; -Hydraulic Oil Temp | 1 |
274-5857 Valve & Mtg Gp
| 13***89 | Clip; (Ladder) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 3 |
270-3530 Valve & Mtg Gp-Auxiliary
| 08***56 | 90 Degrees Elbow | 1 |
| 14***19 | Connector As | 1 |
| 14***28 | Connector Assem. | 2 |
270-7220 Valve & Mtg Gp-Auxiliary
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
270-7219 Valve & Mtg Gp-Control
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
| 14***67 | Elbow Group; (Each Includes) | 2 |
| 15***81 | Tee As | 1 |
289-5223 Valve & Mtg Gp-Control -Generator
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***27 | Connector Group | 1 |
| 14***41 | Connector Group | 1 |
270-7222 Valve & Mtg Gp-Counterbalance
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 10 |
| 14***68 | Elbow Group | 1 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 2 |
270-3559 Valve Gp-Check
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 26***55 | Kit-Flow Control Valve | 1 |
270-7221 Valve & Mtg Gp-Track Tensioner
| 08***56 | 90 Degrees Elbow | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***00 | Clip; (Tab) | 2 |
270-3540 Valve & Mtg Gp-Track Tensioner
| 14***16 | Connector Group | 4 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 2 |
| 15***68 | Tee Group | 2 |
273-2465 Valve & Mtg Gp-Truck Hitch
| 13***89 | Clip; (Ladder) | 1 |
| 14***61 | Elbow Group | 2 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
270-3532 Valve & Mtg Gp-Vibratory
| 11***80 | Elbow | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***13 | Reducer As.-Orfs | 1 |
215-3511 Valve Gp-Accumulator Charging
| 21***11 | Valve Group-Accumulator Charging | 1 |
| 21***56 | Cartridge As-Valve | 1 |
| 21***57 | Kit-Seal | 1 |
269-0536 Valve Gp-Control
| 23***82 | Nut-Special | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
| 25***57 | Kit-Seal; (Check Valve) | 1 |
248-1348 Valve Gp-Control
| 23***73 | Seal-O-Ring | 4 |
| 24***48 | Valve Group-Control; -Piston Pump | 1 |
| 30***49 | Plug-Adjustment, Pipe | 1 |
276-2261 Valve Gp-Control
| 25***77 | Kit-Seal; (Generator Control Valve) | 1 |
| 25***79 | Valve As-Needle | 1 |
| 25***80 | Kit-Seal; (Needle Valve) | 1 |
230-9160 Valve Gp-Control -Truck Hitch
| 23***82 | Nut-Special | 1 |
| 23***60 | Valve Group-Control; -Truck Hitch | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
229-8395 Valve Gp-Pump Control -Propel
| 03***39 | Seal-O-Ring (Id=9.25mm) | 4 |
| 12***42 | Gasket | 1 |
| 22***95 | Valve Group-Pump Control; -Propel | 1 |
276-6041 Valve Gp-Pump Control
| 03***39 | Seal-O-Ring (Id=9.25mm) | 4 |
| 12***42 | Gasket | 1 |
| 27***41 | Valve Group-Pump Control; -Generator | 1 |
300-0504 Valve Gp-Solenoid
| 25***57 | Kit-Seal; (Check Valve) | 1 |
| 25***37 | Valve Group-Solenoid; (24-Volt) | 1 |
| 27***10 | Coil-Solenoid | 2 |
332-1453 Valve Gp-Solenoid
| 33***53 | Valve Group-Solenoid | 1 |
300-0505 Valve Gp-Solenoid
| 25***57 | Kit-Seal; (Check Valve) | 1 |
| 25***37 | Valve Group-Solenoid; (24-Volt) | 2 |
| 27***10 | Coil-Solenoid | 2 |
310-8017 Valve Gp-Solenoid
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 31***17 | Valve Group-Solenoid; -Piston Pump | 1 |
| 31***18 | Valve-Servo | 2 |
276-6042 Valve Gp-Solenoid
| 26***51 | Kit-Seal; (Solenoid Valve)(Solenoid Valve) | 1 |
| 26***45 | Nut; (1/2-32-Thd) | 1 |
| 27***42 | Valve Group-Solenoid; -Pump Control | 1 |
236-2580 Valve Gp-Track Tensioner
| 23***80 | Valve Group-Track Tensioner | 1 |
| 25***56 | Kit-Seal; (Relief Valve) | 1 |
| 25***57 | Kit-Seal; (Check Valve) | 1 |
276-4572 Vibratory Gp
| 09***99 | Fitting-Grease; (Hydraulic) | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***33 | Key-Square; (1/4in X 3/4in Lg) | 4 |
295-3082 Vibratory Gp
| 00***39 | Adapter-Pipe | 4 |
| 10***95 | Bearing | 4 |
| 10***39 | Key-Square | 4 |
Implements
241-9103 Extension Ar-Auger
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
| 21***53 | Extension Group-Main Frame | 1 |
322-6285 Extension Gp-Screed -Electric Heat, 1-Ft
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***89 | Clip; (Ladder) | 4 |
| 16***14 | Clip | 1 |
322-6286 Extension Gp-Screed -Electric Heat, 2-Ft
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***89 | Clip; (Ladder) | 6 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
287-0329 Extension Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***11 | Relay As; (24-Volt)(Screed Control) | 1 |
292-0673 Extension Gp-Screed
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
282-8507 Extension Gp-Screed
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
287-0328 Extension Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***11 | Relay As; (24-Volt)(Screed Control) | 1 |
292-0674 Extension Gp-Screed
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***31 | Bar-Spacer | 1 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
282-8504 Extension Gp-Screed
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 21***53 | Extension Group-Main Frame | 1 |
282-8505 Extension Gp-Screed
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
282-8506 Extension Gp-Screed
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
270-6765 Hitch Ar-Truck
| 27***65 | Hitch Ar-Truck | 1 |
| 27***63 | Lines Group-Truck Hitch | 1 |
| 27***65 | Valve & Mtg Group-Truck Hitch | 1 |
270-3556 Hitch Ar-Truck
| 27***56 | Hitch Ar-Truck | 1 |
| 27***62 | Lines Group-Truck Hitch | 1 |
| 27***65 | Valve & Mtg Group-Truck Hitch | 1 |
301-1469 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
306-6518 Indicator Gp-Tow Point
| 19***29 | Bolt-Shoulder; (M8x1.25-Thd) | 2 |
| 30***50 | Plate | 2 |
| 30***52 | Plate As | 2 |
275-2449 Roller Ar-Push
| 19***08 | Bar | 2 |
| 19***09 | Pin As | 1 |
| 27***49 | Roller Ar-Push | 1 |
292-0983 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 10***64 | Shaft As | 2 |
| 16***17 | Roller | 2 |
112-1276 Shaft Gp-Drive -Eccentric Weight
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 11***76 | Shaft Group-Drive; -Eccentric Weight | 1 |
| 24***28 | Seal | 1 |
283-5617 Shoe Gp-Cutoff
| 10***82 | Shoe As-Cutoff; (1 Foot) | 1 |
| 10***88 | Shoe As-Cutoff; (2 Foot) | 1 |
| 28***17 | Shoe Group-Cutoff | 1 |
Lubrication System
277-2912 Filter Gp-Engine Oil
| 26***25 | Filter-Engine Oil | 1 |
| 27***12 | Filter Group-Engine Oil; -Engine | 1 |
277-4262 Pump Gp-Engine Oil
| 27***62 | Pump Group-Engine Oil | 1 |
| 31***45 | Pump-Oil; (Engine) | 1 |
| 6I***90 | Bolt; (M8x1.25x40-mm) | 4 |
277-4694 Valve Gp-Fluid Sampling -Engine Oil
| 19***67 | Seal-O-Ring | 1 |
| 21***33 | Valve As-Fluid Sampling | 1 |
| 23***61 | Plug; (Blanking) | 1 |
Machine Arrangement
335-8377 Chassis Ar
| 26***04 | Hopper Group | 1 |
| 26***07 | Door Group-Access | 1 |
| 26***08 | Suppression Group-Sound | 1 |
335-8376 Chassis Ar
| 26***49 | Frame Group-Main | 1 |
| 26***04 | Hopper Group | 1 |
| 26***05 | Cover Group | 1 |
335-8373 Common Ar
| 26***01 | Electrical Ar | 1 |
| 26***02 | Hydraulic Ar | 1 |
| 26***05 | Conveyor Ar-Drag & Auger | 1 |
335-8374 Common Ar
| 26***01 | Electrical Ar | 1 |
| 26***05 | Conveyor Ar-Drag & Auger | 1 |
| 26***06 | Installation Ar-Engine | 1 |
270-6762 Generator Ar-Hydraulic
| 27***62 | Generator Ar-Hydraulic | 1 |
| 28***20 | Generator Group; -Hydraulic | 1 |
| 28***21 | Pump & Mtg Group-Generator | 1 |
276-4539 Screed Ar
| 27***39 | Screed Ar; -As3251c, U.S. | 1 |
| 27***72 | Vibratory Group | 1 |
| 27***73 | Sloper Group-Power | 1 |
294-0947 Screed Ar
| 25***35 | Gate Group-End | 1 |
| 25***52 | Adjuster Group-Height | 1 |
| 25***56 | Lines Group-Slope | 1 |
Operator Station
269-8365 Console Gp-Operator
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***87 | Start Switch Assembly; (Key)(Engine) | 1 |
| 12***74 | Cover-Connector; (Wire Router) | 4 |
282-1792 Steering Gp
| 08***11 | Ring | 1 |
| 11***18 | Clip | 1 |
| 16***32 | Block As-Mounting | 1 |
282-9651 Control Gp-Steering
| 09***03 | Key; (Square) | 2 |
| 28***51 | Control Group-Steering | 1 |
| 30***76 | Control Group-Steering | 2 |
305-0776 Steering Gp
| 08***11 | Ring | 2 |
| 09***33 | Key-Square | 1 |
| 19***90 | Sensor Group-Position; -Steering | 1 |
282-9650 Control Gp-Steering
| 09***03 | Key; (Square) | 2 |
| 28***92 | Control Group-Steering | 2 |
| 28***50 | Control Group-Steering | 1 |
263-6011 Floor Mat Gp
| 23***39 | Floor Mat | 2 |
| 26***11 | Floor Mat Group | 1 |
| 27***41 | Floor Mat | 1 |
278-4175 Guard Gp-Vandalism
| 10***14 | Knob | 2 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 2 |
| 15***93 | Screw-Button Head; (M4x0.7x12-mm) | 2 |
132-3090 Lever Gp-Propel
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
250-2297 Meter Gp-Service
| 25***97 | Meter Group-Service; -White Backlight | 1 |
| 4B***43 | Nut,Plain,Hexagon Plate Mtg | 1 |
| 6V***07 | Seal-Rectangular | 1 |
262-4107 Operator Ar
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 26***07 | Operator Ar | 1 |
| 26***54 | Platform Group-Operator; -Rh | 1 |
326-6141 Panel Gp-Control -Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***87 | Switch As-Toggle; (Screed Raise/Hld/Float) | 1 |
| 11***48 | Lamp; (24-Volt, 3-Watt)(Clear)(Fuel Level Gauge) | 1 |
326-6139 Panel Gp-Control -Lh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***87 | Switch As-Toggle; (Screed Raise/Hld/Float) | 1 |
| 11***18 | Clip | 2 |
261-7148 Pedal Gp-Governor
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
272-1764 Platform Gp-Operator
| 03***69 | Tube | 4 |
| 25***07 | Spacer; (8.4x14x17-mm Thk) | 4 |
| 27***64 | Platform Group-Operator | 1 |
276-4588 Platform Gp-Operator
| 08***97 | Washer; (13x50x6-mm Thk) | 2 |
| 10***38 | Collar | 1 |
| 14***74 | Extension As-Platform | 2 |
295-3087 Platform Gp-Operator
| 11***33 | Washer; (11x50x6-mm Thk) | 2 |
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 2 |
| 19***01 | Bracket | 2 |
268-1854 Platform Gp-Operator -Rh
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 13***64 | Bushing | 2 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
268-1855 Platform Gp-Operator -Lh
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 13***64 | Bushing | 2 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
235-3151 Seat Gp-Suspension -Vinyl
| 19***32 | Kit-Foam Back | 1 |
| 20***36 | Kit-Damper | 1 |
| 20***37 | Kit-Seat; (Indicators) | 1 |
199-4298 Seat Gp-Suspension -Vinyl
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 2 |
106-8541 Umbrella Gp -Bg-225c
| 10***41 | Umbrella Group; -Bg-225c | 1 |
Power Train
256-6085 Drive Gp-Final
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 2 |
| 25***85 | Drive Group-Final | 1 |
190-6473 Drive Gp-Final
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
| 18***43 | Shield | 2 |
265-7279 Drive Gp-Hydrostatic
| 26***79 | Drive Group-Hydrostatic; -Pump | 1 |
| 27***40 | Kit-Seal; (Pump Drive) | 1 |
| 27***41 | Kit-Bearing | 1 |
270-3533 Hydraulic Ar-Propel
| 25***88 | Motor & Mtg Group-Propel | 1 |
| 27***33 | Hydraulic Ar-Propel | 1 |
| 27***34 | Pump Group-Dual Propel | 1 |
269-7122 Hydraulic Ar-Propel
| 26***22 | Hydraulic Ar-Propel | 1 |
| 27***10 | Pump & Mtg Group-Propel | 1 |
| 27***12 | Motor & Mtg Group-Propel | 1 |
244-3759 Bearing Gp-Axle
| 13***63 | Bearing | 2 |
| 24***25 | Kit-Shim; (Axle Bearing) | 1 |
| 24***59 | Kit-Housing | 1 |
270-3536 Lines Gp-Propel
| 10***60 | Hose As | 1 |
| 11***95 | Hose As | 1 |
| 12***09 | Valve-Ball; (Hydraulic Tank Drain) | 1 |
270-7213 Lines Gp-Propel
| 11***35 | Hose As | 1 |
| 11***95 | Hose As | 1 |
| 12***09 | Valve-Ball; (Hydraulic Tank Drain) | 1 |
325-4689 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 13***67 | Piston-Brake | 1 |
| 15***84 | Cone | 2 |
270-3534 Pump Gp-Dual Propel
| 12***88 | Flange-Split | 8 |
| 14***15 | Connector As | 3 |
| 14***30 | Connector As | 1 |
Service Equipment And Supplies
303-8783 Box Gp-Tool
| 29***58 | Hinge As | 2 |
| 30***81 | Door | 1 |
| 30***82 | Tool Box | 1 |
286-9968 Film Gp
| 22***30 | Film; (Warning) (High Pressure Cyl) (Platform) | 2 |
| 22***45 | Film-Warning; (Do Not Use Ether, U.S) | 1 |
| 22***28 | Film-Warning; (Shock Hazard) | 1 |
290-2116 Film Gp
| 22***45 | Film-Warning; (Shock Hazard) | 1 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
| 22***72 | Film; (Warning) (High Pressure Cyl) (Hydraulic Service Center) | 2 |
306-5155 Kit-Maintenance
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
| 10***86 | Switch Group-Toggle; (Parking Brake Override Control) | 1 |
7r-4741 Lines Gp-Spray Down
| 08***77 | Adapter | 1 |
| 1G***70 | Extension-Curve | 1 |
| 1G***79 | Hose As | 1 |
278-0358 Lines Gp-Spray Down
| 27***58 | Lines Group-Spray Down | 1 |
| 28***78 | Connector | 1 |
| 28***79 | Connector As | 1 |
276-4609 Plate & Film Gp
| 10***14 | Handle | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***68 | Plate-Serial Number | 1 |
295-3081 Plate & Film Gp
| 15***79 | Film-Instruction; (Grease)(Instructions) | 8 |
| 16***89 | Tack-Fastener | 4 |
| 18***68 | Plate-Serial Number | 1 |
333-2713 Plate & Film Gp
| 11***73 | Film-Stripe; (450-cm Each) | 0 |
| 11***75 | Film-Identification; (Barber-Greene)(Barber-Greene) | 3 |
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
266-4529 Pump & Motor Gp-Washdown -Water
| 26***29 | Pump & Motor Group-Washdown; -Water-Emulsion-Diesel Fuel | 1 |
| 31***68 | Kit-Diaphragm | 1 |
| 31***69 | Kit-Valve | 1 |
278-0357 Reel Gp-Washdown Hose
| 15***02 | Spacer; (11x20x15-mm Thk) | 2 |
| 16***00 | Connector As | 1 |
| 19***88 | Clip | 2 |
270-6875 Washdown Gp
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 09***12 | Clip | 1 |
270-4461 Washdown Gp
| 00***14 | Coupling-Pipe | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 09***12 | Clip | 1 |
Slope And Grade Control
272-0697 Beam Gp-Transverse
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 19***78 | Pad | 2 |
| 27***97 | Beam Group-Transverse | 1 |
209-3130 Control Gp-Grade & Slope
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
| 14***76 | Plug-Connector | 1 |
279-2461 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***64 | Cable; (302-cm) | 0 |
298-0642 Sensor Gp-Grade
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
282-8520 Sensor Gp-Sonic
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
330-6084 Sensor Gp-Sonic
| 10***49 | Plate | 2 |
| 13***21 | Handle | 4 |
| 14***10 | Collar | 2 |
258-6580 Sensor Gp-Sonic -Averaging Ski
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
257-6255 Ski Gp-Averaging
| 25***29 | Mount As | 2 |
| 25***30 | Mount As | 2 |
| 25***55 | Ski Group-Averaging | 1 |
Undercarriage
187-3073 Bogie Gp
| 14***93 | Bogie Group | 1 |
| 17***26 | Shaft | 2 |
| 18***73 | Bogie Group | 1 |
269-2213 Bogie Gp-Center
| 00***31 | Cup-Bearing | 4 |
| 00***32 | Cone-Bearing | 2 |
| 10***58 | Shim; (1.5-mm Thk) | 4 |
269-2216 Bogie Gp-Front
| 00***31 | Cup-Bearing | 4 |
| 00***32 | Cone-Bearing | 2 |
| 10***58 | Shim; (1.5-mm Thk) | 4 |
269-0294 Bogie Gp
| 10***56 | Bearing-Sleeve | 2 |
| 10***85 | Cap | 1 |
| 10***52 | Cap | 1 |
256-5327 Cylinder & Mtg Gp-Tensioner -Track Tension
| 10***93 | Pin | 2 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 4 |
| 25***27 | Cylinder & Mtg Group-Tensioner; -Track Tension | 1 |
270-7599 Frame Gp-Track Roller -Rh
| 16***13 | Bolt-Hex; (M36 X 4 X 80) | 1 |
| 18***27 | Plate | 1 |
| 18***08 | Frame Group-Track Roller; -Rear, Rh | 1 |
270-7596 Frame Gp-Track Roller -Front, Lh
| 10***59 | Bearing-Sleeve | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 1 |
| 17***81 | Cover | 1 |
270-7598 Frame Gp-Track Roller -Front, Rh
| 10***59 | Bearing-Sleeve | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 1 |
| 17***81 | Cover | 1 |
270-7597 Frame Gp-Track Roller -Lh
| 16***13 | Bolt-Hex; (M36 X 4 X 80) | 1 |
| 18***27 | Plate | 1 |
| 18***13 | Frame Group-Track Roller; -Rear, Lh | 1 |
187-3613 Frame Gp-Track Roller -Lh Rear
| 14***76 | Bearing | 2 |
| 17***26 | Shaft | 1 |
| 17***89 | Plate As | 1 |
180-5708 Frame Gp-Track Roller -Rh Rear
| 14***76 | Bearing | 2 |
| 17***26 | Shaft | 1 |
| 17***89 | Plate As | 1 |
269-6159 Idler Gp-Front
| 00***31 | Cup-Bearing | 2 |
| 00***32 | Cone-Bearing | 1 |
| 10***91 | Pin | 2 |
222-3058 Link As-Track
| 11***22 | Bushing-Track | 50 |
| 22***58 | Link As-Track | 1 |
| 25***02 | Seal As | 100 |
193-2438 Roller Gp-Track
| 05***03 | Washer; (40.46x69.85x7.37-mm Thk) | 1 |
| 10***79 | Cover As | 1 |
| 19***38 | Roller Group-Track | 1 |
269-0296 Roller Gp-Track Carrier
| 26***96 | Roller Group-Track Carrier | 1 |
| 6S***09 | Roller Group-Track Carrier; Track Carrier Roller Group | 2 |
| 7X***56 | Bolt-Plt; (M16 X 2.0 X 100) | 2 |
6s-3609 Roller Gp-Track Carrier
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 5 |
| 17***60 | Roller As | 1 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
281-8339 Roller Gp-Track-Single Flange
| 21***56 | Ring-Toric | 2 |
| 21***57 | Seal Group-Duo-Cone | 2 |
| 28***39 | Roller Group-Track-Single Flange | 1 |
188-0535 Tensioner Gp-Track -Idler Hub
| 03***53 | Ring-Retaining | 2 |
| 10***59 | Bearing-Sleeve | 2 |
| 10***18 | Plate | 2 |
297-9687 Track Gp
| 28***93 | Track; (Smooth) | 2 |
| 29***87 | Track Group | 1 |
105-6644 Track Gp
| 10***44 | Track Group | 1 |
| 13***98 | Pad As-Track | 50 |
| 13***90 | Plate-Backing | 49 |
293-9075 Track Gp
| 29***75 | Track Group | 1 |
| 29***01 | Track-Rubber | 2 |
270-7600 Undercarriage Ar
| 19***73 | Drive Group-Final | 1 |
| 27***97 | Frame Group-Track Roller; -Lh | 1 |
| 27***99 | Frame Group-Track Roller; -Rh | 1 |
262-4114 Undercarriage Ar
| 10***44 | Track Group | 1 |
| 25***85 | Drive Group-Final | 1 |
| 26***14 | Undercarriage Ar | 1 |
BG-655D serial number reference
The PIN plate sits on the paver frame near the operator's station, typically on the right-hand console riser or frame rail below it; on this generation it is a stamped/riveted metal plate carrying the full Product Identification Number. Read the first 3 characters as the prefix (identifies model and chassis configuration), followed by the sequential unit number - e.g. BPA00512 or B5D00512. BG-655D and AP-655D are separate model badges with their own PIN prefix ranges; always confirm the exact machine identity against the plate rather than the model decal.
| Prefix | Identifies | Notes |
|---|---|---|
| BPA | BG-655D Steel Track Asphalt Paver | Listed as BPA1-UP alongside B5D1-UP on the same parts-catalog machine line for the BG-655D Asphalt Paver, operator platform group. Powered by the C6.6 engine. Corresponds to the steel-track-chassis build within the BG-655D range. Exact production years not documented in available sources - confirm with dealer. |
| B5D | BG-655D Mobile Track System (MTS) Asphalt Paver | Listed as B5D1-UP (also shown as B5D00001-UP) alongside BPA1-UP for the BG-655D. Powered by the C6.6 engine. Parts-catalog machine header groups this prefix under the Mobile Track System (rubber-belt undercarriage) variant of the BG-655D chassis. Exact production years not documented in available sources - confirm with dealer. |
Frequently asked questions
What engine powers the Cat BG-655D asphalt paver?
A Cat C6.6 ACERT turbocharged diesel meeting Tier 3/Stage IIIA emissions, rated at approximately 130 kW (174 hp).
What is the operating weight of the Cat BG-655D?
Approximately 19,165 kg (42,252 lb) with screed fitted, varying somewhat with the screed and options installed.
What replaced the Cat BG-655D?
The BG-655D was a badge-twin of the AP-655D on the same chassis, not a predecessor to it. Cat later reissued the bare AP655/AP655F name on a separate Tier IV C4.4/C7.1 platform, but that is a later-generation machine rather than a confirmed direct successor to the BG-655D.
What BG-655D owners discuss
What's the reputation of the C6.6 ACERT engine in the BG-655D, and what should I watch for?
This is the Tier 3 / Stage IIIA C6.6 ACERT diesel, so there's no DPF or regen cycle to manage — mechanically simpler than the later Tier 4 C6.6 ratings. Most recurring complaints trace back to fuel system health: contaminated fuel or water intrusion is the leading cause of hard starts and rough running, so keep water separators drained and run clean fuel. Cold-weather hard starting has also been linked to the cold-start-assist circuit acting up; if that happens, have it checked along with the ECM software level. Some oil weeping at seals and gaskets is normal as hours climb and isn't a red flag by itself unless the volume increases. Have your dealer verify any turbo boost or fuel pressure fault code before assuming a major engine failure.
How does the Mobil-trac undercarriage hold up, and what wears first?
The rubber belt track combines crawler flotation with wheel-paver ride quality, and the belt itself — thick rubber with internal steel cable reinforcement — generally outlasts the steel hardware that drives and guides it. Owners report the drive wheel teeth, idlers, and center guide blocks wear faster than the belt and should be inspected on the same interval; swapping a belt without checking that hardware shortens the new belt's service life. Correct belt tension matters too — this design self-tensions via an accumulator, and a belt run loose or over-tight wears unevenly and can walk off track. Smooth vs. tread-bar belt choice changes how much the belt disturbs soft base material, but reported wear life is comparable between the two styles.
Any known hydrostatic propel or tracking issues owners report on this generation of Cat paver?
A machine pulling to one side or not tracking straight is a recurring complaint on Cat's hydrostatically-propelled pavers generally. Cited causes include propel pump or motor calibration drift, a sticking swash plate on one side, or small leakage in the pilot circuit letting the straight-travel spool creep off center. Before assuming a pump rebuild is needed, check the hydraulic filters for fine metal (an early sign of internal pump or motor wear) and re-run the pump, joystick, and throttle calibration through the Advisor system — many drift complaints trace back to calibration rather than hardware. If filter debris turns up, have your dealer verify pump and motor condition before putting the machine back to work.
What electrical or sensor problems come up most with the Advisor monitoring system?
Advisor logs and displays fault codes for engine and machine functions, and most owner-reported trouble traces to sensors and wiring rather than the controller itself. Common complaints: the material/feed height sensor going intermittent or reading false after asphalt buildup or vibration damage, an alternator fuse blowing repeatedly (usually points to a chafed harness or a failing alternator overloading the circuit), and turbo boost or fuel pressure fault codes that turn out to be a connector or harness issue rather than a bad sensor. Standard first steps: clean the material sensor face and check its mount for vibration damage, inspect harnesses for heat and abrasion damage from asphalt exposure, and pull codes before replacing parts. Have your dealer verify a suspect sensor with a scan tool before swapping it.
What causes uneven mat texture or screed heat complaints on this class of paver?
Uneven screed temperature is the most cited cause of mat texture defects — cold spots let the mix stick and tear, hot spots scorch and discolor it. Owners trace most heat complaints to the burner and ignition side (fuel delivery problems or soot buildup in the burner) or damaged heating elements, more often than a bad thermostat. Screed frames also take repeated fatigue from heat-up/cool-down cycling over the years, so on an older machine check the frame for cracking around the heater boxes, not just the heating elements. Daily inspection of the heating system for clogs and uneven flame distribution is the standard preventive step cited by paver operators across brands, not unique to this model.
What do owners say about parts availability and long-term rebuild economics for this machine?
Consensus among used-equipment buyers is that Cat pavers are modular enough to recondition major wear items — undercarriage, screed plates, auger and conveyor flight — rather than requiring a full machine replacement, and dealer parts support is seen as a strength relative to some competing paver brands. That said, this is a lower-volume machine than Cat's wheel-type pavers, so lead time on undercarriage-specific components can run longer than for high-volume parts. Worth confirming parts lead times with your dealer before committing to a purchase if the machine needs undercarriage work.
What should I inspect specifically when buying a used BG-655D?
Pull the Advisor fault log and history first — active or recently-cleared codes are the fastest way to spot chronic sensor or electrical trouble. Physically check the Mobil-trac belt condition and tension, plus the drive wheel, idlers, and guide blocks for wear, since those steel components typically go before the belt does. Check hours against screed frame condition around the heater boxes — cracking from heat cycling signals a hard-worked or older unit — and confirm the burner lights with a clean, even flame. Run the propel system through its full range to confirm the machine tracks straight with no drift, a known complaint area on hydrostatic Cat pavers when calibration hasn't been kept up. Get engine oil and coolant sampled and ask about any history of fuel contamination, since that's the top-cited cause of C6.6 driveability complaints. Have your dealer verify hydraulic pump and motor condition and check Mobil-trac undercarriage wear against factory limits before finalizing the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific BG-655D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.