Caterpillarasphalt paver
Caterpillar BG-260D
Maintenance schedule, common problems & OEM parts breakdown
The Cat BG-260D is a 10 ft (3.05 m) class rubber-tired highway paver built under Caterpillar's Barber-Greene brand for asphalt highway and commercial paving work. Power comes from a Cat C7 ACERT turbocharged six-cylinder diesel with HEUI fuel injection, rated at a gross 167 kW (224 hp) at 2200 rpm with 872 N·m of torque. Operating weight is published in a range of roughly 17,850-18,100 kg (39,300-40,000 lb) with a standard screed fitted; weight varies with screed and heat-system choice. The BG-260D reached the market in the mid-2000s and stayed in production into the early 2010s, following the earlier Barber-Greene BG-260C. It shares its chassis, engine, and hydraulic architecture with the Cat-channel AP-1000D, and buyers could spec a gateless feeder system, dual fully-equipped operator consoles, and a choice of Extend-A-Mat or AS2301 screeds in electric- or diesel-heat form.
The D-series update over the BG-260C added ACERT emissions technology, independent left/right feeder and auger controls, a closed-loop hydrostatic propel system with steering assist, and dual operator stations, replacing the simpler gated-feeder, single-console layout of the C-series. Because the BG-260D and AP-1000D share the same C7 platform, hydraulics, and screed lineup, engine, hydraulic, and screed wear parts cross reference broadly between the two nameplates and across both Cat and Barber-Greene dealer channels. The related 2455-family (AP-1055D/BG-2455D) rides the same base engine but is a smaller-capacity variant and should not be treated as identical. In the used market this generation holds value for its straightforward Tier III/ACERT engine without the filter-based aftertreatment of later pavers, its proven gateless-feeder and hydrostatic-propel design, and its wide dealer parts support, making it a common shop-friendly paver for contractors looking to avoid newer emissions-system complexity.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar BG-260D specifications
Engine
| Engine model | Cat C7 with ACERT Technology — turbocharged, air-to-air aftercooled, inline 6-cylinder diesel |
| Gross power | 167 kW (224 hp) at 2200 rpm (SAE J1995 gross rating) |
| Net (flywheel) power | 166 kW (223 hp) |
| Peak torque | 872 N·m |
| Displacement | 7.2 L (442 in³), inline 6-cylinder — standard figure for the C7 platform at this power rating |
| Emissions tier | Not stated on published spec sheets for this rating. C7 ACERT engines from this production era (mid-to-late 2000s) are generally certified to U.S. EPA Tier 3 / EU Stage IIIA nonroad emissions standards — verify against the engine emissions label on the specific unit |
Weights
| Operating weight | 39,320 lb (17,851 kg) with a standard screed fitted |
| Operating weight (alternate/base configuration) | A lower figure of 32,470 lb (14,728 kg) is also published, most likely reflecting the base tractor without a full screed. Operating weight varies by screed and extension configuration |
| Shipping weight | Not separately published; the lighter base-configuration weight above is the closest available reference for transport planning |
| Ground pressure | Not published |
Dimensions
| Overall length (ground) | 23.75 ft (7,240 mm) |
| Wheelbase | 8.3 ft (2,560 mm) |
| Paving width | 10 ft (3,050 mm) standard/base screed. Marketed as a 10-ft-class paver; with bolt-on or hydraulic screed extensions the working width can range from roughly 8 ft to 24 ft (2.44-7.38 m), screed-model dependent |
| Transport width | Not published for this model |
| Transport height | Not published for this model |
| Ground clearance | Not published for this model |
Performance
| Maximum speed | 300 ft/min (91 m/min) maximum travel speed; the same figure is sometimes published as paving speed |
| Travel (transport) speed | Not published separately from the maximum-speed figure above |
| Gradeability | Not published |
| Tires | Drive tires 18.00 x 25 sand-rib; steering tires 16 in x 22 in solid rubber |
Service capacities (summary)
| Fuel tank | 446 L (118 gal US) |
| Hydraulic system | Not published for this rating — confirm against the operator’s manual for this unit |
| Engine oil (refill) | Not published for this specific engine rating |
| Cooling system | Not published for this specific engine rating |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
BG-260D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (Cat C7 ACERT, with filter) | approx. 26 L (6.8 US gal) in the deep-sump paver installation; shallow-sump C7 industrial variants run 18 L (19 qt) — varies by sump configuration | Cat DEO diesel engine oil. SAE 10W-30 covers -18C to 40C (0F to 104F), the typical year-round grade for this engine. SAE 15W-40 for sustained warm ambient, SAE 5W-30 down to -30C (-22F), SAE 0W-30 or 0W-20 for arctic cold starts. Use an oil meeting Cat's diesel engine oil performance requirements for this engine family. |
| Cooling System | approx. 36 L (9.5 gal) for the high-capacity cooling package on this engine; verify against the tractor’s own sight gauge for the exact fill | Cat ELC (Extended Life Coolant), organic acid technology (OAT), premixed 50/50 or concentrate mixed 1:1 with water. Extended-life formula; no supplemental coolant additive needed until the scheduled extender treatment. |
| Fuel Tank | approx. 447 L (118 US gal); dual-tank configurations in this paver family run up to about 462 L (122 gal) — varies by configuration/series | No. 2-D ultra-low sulfur diesel for normal service. No. 1-D or a winter-blend diesel in cold ambient conditions to prevent fuel waxing. |
| Hydraulic System and Tank | approx. 149 L (39.4 gal); confirm against the tractor’s own dipstick/sight gauge for the exact fill | Cat HYDO Advanced all-season mineral hydraulic oil is the factory-preferred fill. Where the propel and implement circuits share one reservoir, Cat TDTO is the accepted alternative fluid. Select viscosity by ambient temperature per the machine's cold-weather chart. |
| Grease (all chassis and undercarriage fittings) | spec only — no reservoir capacity; applied per lubrication interval at each grouped or remote grease fitting | Cat Advanced 3Moly Grease (lithium-complex, NLGI 2, 3% molybdenum disulfide) for chassis pivots, feeder/auger bearings, and wheel-end/undercarriage points, rated -20C to 40C (-4F to 104F). Switch to an arctic-grade Cat grease for sustained sub-zero service. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar BG-260D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the BG-260D beyond the schedule
Predictive Maintenance & Fluid Analysis
Run scheduled oil sampling on the C7 ACERT HEUI engine; rising iron or copper flags injector or bearing wear before it causes a shutdown. Sample the closed-loop hydrostatic propel circuit separately -- contamination trends there show up as steering-assist drift or slow response long before a pump fails outright. Track coolant condition on the extended-life fill; the screed and hopper area put the cooling system through more heat cycling than typical earthmoving duty. Check fuel filters and the water separator often -- the HEUI system is unusually sensitive to water and dirt in the fuel supply.
Corrective & Common Repairs
Expect wear at the gateless feeder chains and sprockets, which run continuously and take the brunt of mix delivery. Auger flights and center bearings wear from abrasive mix contact and need regular inspection. Tamper bar shoes and vibrator eccentrics loosen with hours and cause mat streaking if ignored. Steering-assist calibration on the hydrostatic propel system drifts over time and needs periodic reset for straight tracking. Screed heater elements, on either the electric or diesel-heat variant, fail individually and are best checked and swapped before paving season, not mid-mat.
Overhaul & Rebuild Points
At higher hours, plan on rebuilding the propel pumps and motors driving the tandem wheel stations, plus the hub reduction gearing they feed. Screed extension slides and wear plates thin out and should be replaced as a set to keep mat thickness even across the paving width. The auger and conveyor drive gearboxes warrant a teardown inspection once chain stretch or sprocket wear shows up. Time the C7's top-end work -- injectors, turbocharger, valve train -- off oil-analysis trends rather than a fixed hour figure.
Seasonal & Environment Servicing
Before cold-weather starts, check the HEUI fuel system for gelling risk and confirm coolant heaters and starting aids work; a hydrostatic wheel paver won't forgive a sluggish cold start on a job with a hot-mix delivery schedule. Verify screed heat output ahead of paving season on both electric and diesel-fired setups. Check tire inflation as temperatures swing -- this is a rubber-tired machine, not tracked. At layup, strip hardened asphalt from the hopper, augers, and screed before it locks the tamper bar and conveyor chains solid.
BG-260D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 119-0073 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 132-7165 | Filter Element As-Air | Air intake service | Check fitment → |
| 077-5232 | Filter Element-Breather | Hydraulic service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
| 054-1719 | Filter Element As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
BG-260D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-1 | Engine oil pressure reading is below the safe operating threshold for current engine speed; this is the most severe (shutdown) level of the low oil pressure event. | Low oil level, worn oil pump, plugged suction screen or filter, or a failed oil pressure sensor/wiring. | Stop the engine immediately, check oil level and condition, inspect for external leaks, then verify sensor wiring before restarting. |
| 110-0 | Engine coolant temperature has reached the shutdown threshold, the most severe level of the high coolant temperature event. | Low coolant level, blocked radiator core or fan drive fault, failed thermostat, or water pump failure. | Shut the engine down safely, let it cool, check coolant level and radiator/fan for debris, then inspect the thermostat and water pump before restart. |
| 111-1 | Coolant level sensor reads below the normal operating range, indicating the cooling system is low on coolant. | Coolant loss from a leak at a hose, radiator, or head gasket, or a failed level sensor/float. | Check coolant level and top off with the correct coolant, inspect hoses and radiator for leaks, then test the level sensor if the code persists after refilling. |
| 168-1 | Electrical/charging system voltage supplied to the engine ECM is below the normal range. | Weak or discharged battery, loose or corroded battery cable, or a failing alternator/charging circuit. | Test battery voltage and charging output, clean and tighten battery connections, then check alternator output under load. |
| 190-8 | Engine speed/timing sensor signal has an abnormal frequency, pulse width, or period, so the ECM cannot read engine rpm reliably. | Incorrect air gap between the sensor and the timing wheel, a damaged tooth on the timing wheel, or a corroded/loose sensor connector. | Inspect and reset the sensor air gap to spec, check the connector for corrosion, and inspect the timing wheel for damage. |
| 102-10 | Boost (intake manifold) pressure sensor signal is changing faster than physically possible, pointing to a signal or wiring fault rather than a real boost swing. | Damaged sensor wiring or connector, an intermittent sensor ground, or a failing boost pressure sensor. | Inspect sensor wiring and connector for damage or corrosion, then test or replace the boost pressure sensor if wiring checks out good. |
| 94-17 | Fuel delivery pressure is below normal at the least severe (warning) level. | Plugged fuel filter, restricted fuel line, failing lift pump, or air in the fuel system. | Check fuel filter condition and change if due, inspect fuel lines for restriction, and purge air from the fuel system before testing lift pump output. |
| 173-11 | Exhaust gas temperature is very high, triggering an engine power derate to protect the turbocharger and exhaust components. | Turbocharger fault, restricted air intake or exhaust, an injection timing/fueling problem, or sustained engine overload. | Check air filter and exhaust for restriction, inspect the turbocharger, and reduce engine load; have injection timing checked if the code repeats. |
| 1-5 | Cylinder #1 injector solenoid circuit current is below normal, indicating an open circuit at the injector or its wiring. | Failed injector solenoid, broken or disconnected injector wiring, or a corroded connector. | Check the injector wiring harness and connector for continuity and damage, then test or replace the injector solenoid if wiring is good. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
BG-260D attachments & work tools
Screed – Extend-A-Mat 10-20B (power-extending)
Cat's variable-width power-extending screed pairs with the BG-260D tractor. Base paving width runs 3.05-5.94 m (10'-19'6"); with bolt-on cutoff shoes and extensions the full working range is 2.44-7.37 m (8'-24'2"). Power-adjustable main-screed crown, extender slope and extender height are standard on this screed.
Screed – Pavemaster (fixed-width)
A heavy-duty fixed 3.05 m (10') screed is also offered on this Cat wheel-paver platform for simpler, lower-cost operation. With cutoff shoes and bolt-on extensions the working range can reach roughly 2.44-9.14 m (8'-30'); optional hydraulic strike-offs widen each side further. Availability varies by configuration/series.
Screed extensions & cutoff shoes
Bolt-on screed extensions are available in increments from about 150 mm to 900 mm (6" to 3') per side. One-foot and two-foot cutoff shoes trim paving width down in roughly 76 mm (3") steps. Larger extensions carry their own vibration and heat; smaller ones heat by convection from the main screed.
Screed heating – electric plate heat
Standard screed heat on the BG-260D is an electric plate-heating system that replaces diesel or propane burners used on earlier BG-260 screeds. Multi-zone, thermostatically controlled elements (including the extenders) bring the plate to about 122°C (220°F) in 30 minutes or less when ambient temperature is 22°C (40°F) or higher, powered by a tractor-mounted single-phase generator.
Bevel end plates & berm extensions
Bolt-on bevel end plates shape the mat edge for common lift thicknesses in the roughly 38-76 mm (1.5"-3") range. Left- and right-hand berm extensions, offered in a few lengths, add their own screed plate and an adjustable outer-edge slope for forming a shoulder or berm in the same pass.
Grade & slope control kit
Proportional automatic grade and slope control is offered as a factory/dealer-installed kit on this paver class: a base package of screed-mounted control units and a slope sensor, with wand or sonic grade sensors, rigid ski, mobile stringline, and outboard/inboard leveler references (roughly 9-12 m / 30'-40' lengths) as add-ons. Exact package content varies by configuration/series.
Material handling – feeder/auger system
Left and right feeders and left and right augers run on independent variable-speed drives with a material-handling controller, holding a constant mix head without feeder gates. The auger assembly can be hydraulically raised roughly 170 mm (6.75") to clear large-stone mix or ease loading. Paddle or sonic auger/feeder sensors are available to automate material-level control.
Hopper
Power-tilt hopper with heavy-duty flashing limits spillage during dumping. Rated capacity for this size class runs about 6 m³ (roughly 215 cu ft) heaped, commonly quoted near 12 metric tons of mix depending on material density; truck-entry opening is about 3.2 m (10'5") wide.
Truck-handling equipment – push rollers & hitch
Oscillating push rollers center the delivery truck against the hopper and assist steering during loading. A hydraulically actuated truck hitch, run from the operator's console, locks the paver to the truck body while unloading.
Tires & front-wheel-assist option
Standard fitment is 18.00x25 sand-rib drive tires with 406x559 mm (16"x22") solid-rubber steering tires. A front-wheel-assist option adds hydrostatic drive to the front steering wheels for roughly 20 percent more rimpull in soft or wet base conditions, and a more aggressive-tread radial drive tire is offered where extra traction is needed. Confirm exact assist configuration with the dealer, as it can vary by series.
Lighting & hazard package
An optional work-light package adds variable-position sealed-beam floodlights front and rear for night paving, plus a rotating amber beacon for jobsite visibility.
Fumes evacuation system
A fumes evacuation system – shrouding around the auger chamber, a hydraulic-driven exhaust fan and ducting to a stack – vents asphalt fumes away from the operator's station and screed area; offered as a guarding/operator-protection option on this paver class.
All BG-260D assemblies by section
Every catalogued assembly group for the Caterpillar BG-260D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
233-2784 Aftercooler Gp -Air
| 23***82 | Sleeve-Rubber | 4 |
| 23***84 | Aftercooler Group; -Air | 1 |
310-9669 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
183-8087 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
231-8007 Air Cleaner Gp
| 18***87 | Air Cleaner Group | 1 |
| 1P***86 | Adapter | 1 |
| 1S***37 | Cap As-Air Cleaner | 1 |
189-8780 Cover Gp-Air Inlet -Includes Heater
| 18***80 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 29***75 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
288-0973 Cover Gp-Air Inlet -Starting Aid Heater
| 24***95 | Insulator; (Air Inlet Heater) | 1 |
| 28***73 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
294-7675 Cover Gp-Air Inlet -Starting Aid Heater
| 24***95 | Insulator; (Air Inlet Heater) | 1 |
| 29***75 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
222-7970 Elbow Gp-Air Inlet
| 15***09 | Elbow; (Air Inlet) | 1 |
| 1U***46 | Sealant (For Locations A) | 1 |
| 22***70 | Elbow Group-Air Inlet | 1 |
231-8008 Exhaust Gp-Flexible
| 06***93 | Clamp-Tubing | 1 |
| 1W***31 | Clamp-Band; -Turbo Exhaust-Exhaust | 1 |
| 23***08 | Exhaust Group-Flexible | 1 |
219-5840 Manifold Gp-Exhaust
| 21***64 | Manifold-Exhaust; (End) | 2 |
| 21***40 | Manifold Group-Exhaust | 1 |
| 21***55 | Manifold-Exhaust; (Center) | 1 |
200-4508 Manifold Gp-Exhaust
| 17***98 | Bolt-Flange Head; (M10x1.5-Thd) | 12 |
| 18***72 | Spacer; (11x16x35-mm Thk) | 12 |
| 20***08 | Manifold Group-Exhaust; (Exhaust) | 1 |
151-0864 Plug Gp-Air Inlet Manifold
| 15***64 | Plug Group-Air Inlet Manifold | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 9S***05 | Plug-O-Ring; (Straight Thread O-Ring) | 1 |
231-8010 Shield Gp-Manifold
| 23***10 | Shield Group-Manifold | 1 |
| 24***73 | Insulation | 1 |
| 5P***25 | Lockwire; (110 Dm-Sold By The Meter) | 0 |
201-9635 Turbocharger Gp
| 20***35 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
| 7C***31 | Gasket-Turbocharger | 1 |
281-4202 Turbocharger Gp
| 25***99 | Turbocharger Group | 1 |
| 25***24 | Sleeve; (46-cm) | 0 |
| 28***02 | Turbocharger Group | 1 |
197-4998 Turbocharger Gp -Basic
| 13***24 | Plate-Clamp; (Turbine)(Turbine) | 2 |
| 15***72 | Clamp As; (Compressor) | 1 |
| 16***63 | Clamp | 2 |
250-7699 Turbocharger Gp
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 15***72 | Clamp As; (Compressor) | 1 |
| 16***63 | Clamp | 2 |
Basic Engine
110-0361 Belt Tensioner Gp
| 11***61 | Belt Tensioner Group | 1 |
| 13***42 | Belt Tightener; (Auxiliary Drive) | 1 |
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 1 |
212-4289 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 21***88 | Camshaft As | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
222-5947 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 3 |
| 17***67 | Spacer; (8.8x16x10-mm Thk)(Marked X) | 8 |
| 1U***46 | Sealant (For Locations A) | 0 |
118-1727 Cover Gp-Front Housing -Accessory Drive
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 4W***26 | Cover | 1 |
211-9120 Cover Gp-Front Housing
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
| 13***22 | Stud | 2 |
| 16***76 | Cover As-Front | 1 |
172-8732 Cover Gp-Front Housing
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 17***32 | Cover Group-Front Housing | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
261-3722 Cover Gp-Valve Mechanism
| 09***49 | Bolt; (M8x1.25x40-mm) | 13 |
| 22***31 | Cap As-Filler; (Engine Oil) | 1 |
| 26***22 | Cover Group-Valve Mechanism | 1 |
210-5590 Crankshaft Gp
| 10***08 | Bearing-Main; (Standard) | 6 |
| 14***62 | Bearing; (0.25mm Undersize) | 0 |
| 14***64 | Bearing; (0.5mm Undersize) | 0 |
221-4482 Cylinder Block Gp
| 1W***07 | Sleeve | 2 |
| 22***82 | Cylinder Block Group | 1 |
| 30***41 | Cylinder Block Group | 1 |
305-8141 Cylinder Block Gp
| 10***04 | Sleeve-Cylinder | 0 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
| 26***74 | Cylinder Block Group | 1 |
263-3774 Cylinder Block Gp
| 26***74 | Cylinder Block Group | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 14 |
| 7E***68 | Cap-Crankshaft Bearing | 7 |
314-4184 Cylinder Head As
| 22***00 | Sleeve-Injector | 6 |
| 23***85 | Insert-Valve Seat; (Standard)(Exhaust) | 6 |
| 26***57 | Insert-Valve Seat; (Standard)(Inlet) | 12 |
300-9550 Cylinder Head Gp
| 13***83 | Retainer-Spring | 6 |
| 13***15 | Seat-Valve Spring | 6 |
| 13***18 | Spring-Valve; (Exhaust) | 6 |
219-5849 Cylinder Head Gp
| 13***95 | Gasket-Cylinder Head | 1 |
| 13***52 | Bolt-12 Point Head; (M20x2.5x170mm) | 1 |
| 14***89 | Fastener Group-Cylinder Head | 14 |
219-5847 Cylinder Head Gp
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 21***47 | Cylinder Head Group | 1 |
241-4101 Damper Gp
| 16***21 | Damper Assem. | 1 |
| 22***21 | Spacer; (101.5x167x8-mm Thk) | 1 |
| 24***01 | Damper Group | 1 |
246-1571 Drain Gp-Engine Oil
| 16***35 | Plug As | 1 |
| 20***28 | Hose As | 1 |
| 24***71 | Drain Group-Engine Oil | 1 |
231-8006 Drive & Mtg Gp-Pump
| 09***19 | Plug-Pipe | 1 |
| 14***12 | Adapter As | 2 |
| 14***81 | Elbow Group | 1 |
267-6486 Drive Gp-Accessory -Hydraulic Fan Pump
| 13***19 | Seal-Integral; (Integral) | 1 |
| 26***86 | Drive Group-Accessory; -Hydraulic Fan Pump | 1 |
| 3E***68 | Seal-Lip Type | 1 |
258-8723 Fastener Gp-Cylinder Head
| 22***44 | Clip | 3 |
| 24***00 | Spring | 11 |
| 25***23 | Fastener Group-Cylinder Head; -Valve Cover Base | 1 |
213-1630 Fastener Gp-Front Cover
| 21***30 | Fastener Group-Front Cover | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 12 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 2 |
116-4556 Fastener Gp-Front Housing
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***36 | Bolt; (M12x1.75x70-mm) | 6 |
113-6170 Fastener Gp-Lifting -Engine, Rear
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
| 8T***36 | Capscrew; (Hex Hd) (M10 X 1.50 X 25l Gr 10.9) | 3 |
186-5892 Flywheel Gp
| 18***92 | Flywheel Group | 1 |
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
273-2716 Flywheel Gp
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
| 27***16 | Flywheel Group | 1 |
205-1321 Gear Gp-Front
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
| 11***19 | Plate-Retaining | 1 |
132-2106 Housing Gp-Flywheel
| 13***06 | Housing Group-Flywheel | 1 |
| 6V***42 | Bolt (M10x1.50x40mm) | 2 |
| 7C***33 | Housing-Flywheel | 1 |
165-4446 Housing Gp-Front
| 16***46 | Housing Group-Front | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 24***59 | Housing-Front | 1 |
139-4081 Lifter Gp-Valve -Mechanism
| 13***81 | Lifter Group-Valve; -Mechanism | 1 |
| 13***84 | Spacer; (15.9x24x6-mm Thk) | 2 |
| 13***76 | Shaft As-Lifter | 1 |
153-5417 Lifting Gp-Engine
| 15***17 | Lifting Group-Engine | 1 |
| 15***96 | Plate-Lifting; (Rear) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
169-3130 Mounting Gp-Alternator
| 12***40 | Support-Alternator | 1 |
| 13***82 | Support-Alternator | 1 |
| 16***30 | Mounting Group-Alternator | 1 |
231-8005 Mounting Gp-Engine -Flexible
| 15***12 | Mount As | 2 |
| 23***05 | Mounting Group-Engine; -Flexible | 1 |
| 23***43 | Support As | 2 |
152-5013 Mounting Gp-Fan Drive
| 15***13 | Mounting Group-Fan Drive | 1 |
| 25***23 | Support As; (Fan) | 1 |
| 7E***13 | Bracket | 1 |
226-1799 Pan Gp-Oil -Engine
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 21***36 | Pan; (Oil)(Engine) | 1 |
| 22***99 | Pan Group-Oil; -Engine | 1 |
212-3652 Piston & Rod Gp
| 19***53 | Ring-Piston; (Intermediate) | 1 |
| 19***71 | Pin-Piston | 1 |
| 19***72 | Retainer-Pin | 2 |
159-0303 Plug Gp-Cylinder Block
| 15***03 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 6F***62 | Washer,Flat Transmission Oil Cooler | 1 |
162-8068 Plug Gp-Engine -Engine Oil
| 14***95 | Plug As | 1 |
| 16***68 | Plug Group-Engine; -Oil Gallery | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
121-0802 Plug Gp-Flywheel Housing
| 12***02 | Plug Group-Flywheel Housing | 1 |
| 2P***94 | Plug-Sealing | 1 |
206-2044 Pulley Gp-Crankshaft
| 20***75 | Pulley; (8-Groove) | 1 |
| 20***44 | Pulley Group-Crankshaft | 1 |
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
130-5871 Pulley Gp-Engine
| 12***37 | Support-Compressor | 1 |
| 13***71 | Pulley Group-Engine | 1 |
| 17***23 | Pulley Group-Idler; (8 Groove) | 1 |
143-4927 Pulley Gp-Fan Drive
| 11***38 | Plate; (Thrust) | 1 |
| 14***27 | Pulley Group-Fan Drive | 1 |
| 19***56 | Pulley; (8-Groove) | 1 |
175-3223 Pulley Gp-Idler
| 12***90 | Bolt; (M10x1.5) | 1 |
| 12***91 | Cover-Dust | 1 |
| 12***92 | Pulley As-Idler; (8-Groove) | 1 |
256-3834 Rocker Arm Gp -Inlet
| 25***34 | Rocker Arm Group; -Inlet | 1 |
| 25***35 | Rocker Arm As; (Inlet) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
256-3831 Rocker Arm Gp -Exhaust
| 25***31 | Rocker Arm Group; -Exhaust | 1 |
| 25***32 | Rocker Arm As; (Exhaust) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
122-8929 Seal Gp-Crankshaft
| 12***29 | Seal Group-Crankshaft | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
| 7C***71 | Seal Group-Crankshaft; (Rear)(Rear) | 1 |
235-5528 Valve Mechanism Gp
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
232-3717 Valve Mechanism Gp
| 13***79 | Rod-Valve Push; (Valve Push) | 12 |
| 13***81 | Lifter Group-Valve; -Mechanism | 3 |
| 21***09 | Bridge-Valve | 6 |
256-3830 Valve Mechanism Gp
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
Braking System
193-8539 Pump & Valve Gp-Brake -Manual Release
| 19***39 | Pump & Valve Group-Brake; -Manual Release | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
229-9476 Pump Gp-Hand -Manual Brake Release
| 22***76 | Pump Group-Hand; -Manual Brake Release | 1 |
| 23***43 | Knob | 1 |
| 31***34 | Kit-Seal; (Check Valve) | 1 |
Controls
102-2703 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 1 |
| 10***47 | Gear-Worm | 1 |
| 10***50 | Guide-Bushing | 1 |
197-5296 Adjuster Gp-Height
| 10***24 | Tube As; (Vertical) | 4 |
| 10***39 | Key-Square | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
8i-0257 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 2 |
| 10***04 | Bolt-Shoulder | 2 |
| 10***24 | Tube As; (Vertical) | 4 |
197-9844 Chain Gp-Screed
| 10***87 | Link-Connecting | 1 |
| 19***33 | Link-Offset | 1 |
| 19***44 | Chain Group-Screed | 1 |
197-5288 Crown Gp
| 10***39 | Key-Square | 1 |
| 11***50 | Sprocket; (12-Teeth) | 1 |
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 1 |
120-5898 Crown Gp-Manual
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 05***09 | Bolt-Socket Head | 4 |
| 10***87 | Link-Connecting | 1 |
276-4590 Crown Gp-Power
| 10***01 | .. Roller, Bearing | 2 |
| 10***38 | Pointer | 1 |
| 10***39 | Key-Square | 1 |
196-2503 Jack Gp-Height Adjuster
| 10***64 | Bearing-Thrust | 2 |
| 11***49 | Worm | 1 |
| 19***03 | Jack Group-Height Adjuster | 1 |
102-2699 Jack Gp-Sloper
| 10***99 | Jack Group-Sloper | 1 |
| 10***46 | Gear-Worm | 1 |
| 10***49 | Guide-Bushing | 1 |
277-2004 Motor Gp-Power Adjuster
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
197-9850 Shaft Gp-Drive -Front
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***12 | Spindle As | 1 |
197-9849 Shaft Gp-Drive -Rear
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***45 | Spindle As | 1 |
282-7961 Shaft Gp-Drive -Non-Actuated
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 28***61 | Shaft Group-Drive; -Non-Actuated | 1 |
8i-0214 Sloper Gp-Manual
| 06***93 | Lockwasher-Bearing | 2 |
| 10***99 | Jack Group-Sloper | 2 |
| 10***00 | . Axle, Rod End | 2 |
Cooling System
117-3643 Cooler Gp-Engine Oil
| 11***43 | Cooler Group-Engine Oil | 1 |
| 23***55 | Gasket | 1 |
| 26***43 | Core As-Engine Oil Cooler | 1 |
206-4228 Lines Gp-Water -Engine
| 11***23 | Regulator-Water Temperature; (97-Deg C)(Coolant) | 2 |
| 12***66 | Gasket | 1 |
| 14***95 | Plug As | 1 |
236-4413 Pump Gp-Water
| 11***37 | Pulley; (8-Groove) | 1 |
| 11***25 | Filter; (Water)(Pump) | 1 |
| 12***70 | Shaft Assem. | 1 |
189-2232 Pump Gp-Water
| 14***95 | Plug As | 2 |
| 14***09 | Plug As-Sto | 2 |
| 16***19 | Plug As | 1 |
231-8004 Radiator & Hyd Oil Cooler Gp
| 03***19 | Cap As-Radiator | 1 |
| 06***69 | Stem | 1 |
| 12***02 | Tape; (900-cm) | 0 |
233-2785 Radiator & Hyd Oil Cooler Gp
| 23***85 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 28***98 | Radiator | 1 |
| 28***99 | Cooler-Oil | 1 |
Electrical And Starting System
3e-6328 Alarm Gp -Caterpillar Monitoring System
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
232-1714 Alternator Gp-Charging
| 12***96 | Pulley-Alternator | 1 |
| 20***99 | Spacer | 1 |
| 20***29 | Belt-Serpentine; (Fan Drive) | 1 |
200-8277 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
316-7251 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
229-4951 Battery & Wiring Gp
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 09***92 | Clip | 1 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 3 |
9w-0742 Block Gp-Junction -Battery
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
| 8C***58 | Block Group-Junction; (Battery) | 1 |
328-9946 Box Gp-Control
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
| 27***74 | Box; (Lh) | 1 |
122-9303 Buffer Gp-Sensor -Material Height-Propel Forward, Reverse-Propel Speed Dial
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
122-9309 Buffer Gp-Sensor -5000-Hz Pwm
| 12***09 | Buffer Group-Sensor; -5000-Hz Pwm-Conveyor Speed | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
246-9345 Control & Mtg Gp-Engine Elek
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 14***92 | Stud; (M8x1.25-Thd) | 4 |
| 22***73 | Control Group-Engine Electronic | 1 |
226-7473 Control Gp-Engine Electronic
| 22***73 | Control Group-Engine Electronic | 1 |
| 26***78 | Control Group-Unprogrammed; (Engine) | 1 |
189-0077 Control Gp-Unprogrammed
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 18***77 | Control Group-Unprogrammed; -Tractor Xmsn Control | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
222-2599 Electrical Ar
| 22***99 | Electrical Ar | 1 |
| 22***51 | Battery & Wiring Group | 1 |
| 22***49 | Wiring Group-Power Train | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
351-5791 Electronics Gp-Machine
| 35***11 | Software Group-Machine | 1 |
| 35***91 | Electronics Group-Machine | 1 |
245-6573 Electronics Gp-Machine
| 24***73 | Electronics Group-Machine | 1 |
| 35***63 | Software Group-Machine | 1 |
| 35***64 | Service Group-Machine | 1 |
351-8709 Electronics Gp-Machine
| 31***96 | Software Group-Machine | 1 |
| 35***09 | Electronics Group-Machine | 1 |
245-6571 Electronics Gp-Monitor
| 24***71 | Electronics Group-Monitor | 1 |
| 28***39 | Software Group-Monitor | 1 |
| 28***40 | Service Group-Monitor | 1 |
142-8333 Fastener Gp-Ground Stud
| 14***33 | Fastener Group-Ground Stud | 1 |
| 5P***70 | Nut-Hard; (M8 X 1.25) | 1 |
| 6V***64 | Washer-Hard; (8.8x25.5x5-mm Thk) | 1 |
234-9176 Generator & Mtg Gp-Hydraulic
| 11***33 | Washer; (11x50x6-mm Thk) | 4 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
241-8414 Generator Ar
| 23***57 | Pump & Mtg Group-Generator | 1 |
| 23***58 | Valve & Mtg Group-Control; -Generator | 1 |
| 23***59 | Motor & Mtg Group-Generator | 1 |
231-1332 Generator Gp
| 23***32 | Generator Group | 1 |
318-7418 Installation Gp-Communication
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***74 | Cover-Connector; (Wire Router) | 1 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
162-3294 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
241-8232 Lighting Gp-Flood
| 24***69 | Bracket-Light | 2 |
| 24***32 | Lighting Group-Flood | 1 |
| 5D***35 | Grommet | 2 |
198-8284 Lighting Gp-Warning Beacon
| 03***14 | Screw; (10-32x1-In) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
170-7071 Motor Gp-Electric -Fuel Transfer Pump
| 09***47 | Brush As | 1 |
| 11***94 | Bell; (Rear) | 1 |
| 11***61 | Bearing | 2 |
258-6918 Mounting Gp-Sensor -Sonic Sensor
| 25***18 | Mounting Group-Sensor; -Sonic Sensor | 1 |
| 28***75 | Collar | 4 |
| 28***79 | Washer; (32.5x63.5x7.1-mm Thk) | 2 |
232-6362 Panel Gp-Power -Generator
| 19***06 | Strip-Terminal | 1 |
| 19***80 | Circuit Breaker As; (20-Ampere)(240-Volt Receptacle) | 2 |
| 19***75 | Receptacle | 2 |
306-7612 Panel Gp-Power
| 19***06 | Strip-Terminal | 1 |
| 19***80 | Circuit Breaker As; (20-Ampere)(240-Volt Receptacle) | 1 |
| 19***75 | Receptacle | 2 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 33***45 | Radio Group-Communication; -Product Link 121sr | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
198-8279 Sensor Gp-Auger
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 11***07 | Knob | 2 |
| 12***44 | Paddle As | 2 |
145-8519 Sensor Gp-Auger
| 11***24 | Clamp | 2 |
| 14***19 | Sensor Group-Auger | 1 |
| 16***41 | Support-Sensor | 2 |
231-1977 Sensor Gp-Engine
| 16***61 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
| 18***63 | Plug Group | 1 |
297-5355 Sensor Gp-Engine
| 16***61 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
| 18***63 | Plug Group | 1 |
330-6038 Sensor Gp-Engine
| 16***61 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
| 18***63 | Plug Group | 1 |
214-4863 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
| 21***63 | Sensor Group-Position; -Rotary-Tc Impeller Clutch, Lh Pedal | 1 |
266-1467 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 26***67 | Sensor Group-Position; -Brake Pedal | 1 |
160-2443 Sensor Gp-Position -Rotary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
266-1484 Sensor Gp-Position -Rotary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 26***84 | Sensor Group-Position; -Rotary | 1 |
219-2385 Sensor Gp-Position -Auger
| 12***50 | Receptacle As | 1 |
| 12***51 | Bushing | 1 |
| 12***52 | Clamp As-Cable | 1 |
284-8876 Sensor Gp-Position
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 28***76 | Sensor Group-Position | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
161-8904 Sensor Gp-Position -Rear Steer
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***04 | Sensor Group-Position; -Rear Steer-Lift | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
168-3551 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***51 | Sensor Group-Position; -Steering | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
276-9067 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 27***19 | Sensor Group-Pressure; (Engine Block Oil Inlet) | 1 |
| 27***67 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
224-4536 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***27 | Harness As-Sensor; (14-Ga Wire)(Engine Oil Temperature) | 3 |
197-8393 Sensor Gp-Pressure
| 16***03 | Sensor Group-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
236-6220 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 23***20 | Sensor Group-Pressure; -Injection Actuation | 1 |
266-8650 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 26***50 | Sensor Group-Pressure; -Intake Manifold Air | 1 |
| 27***93 | Sensor Group-Pressure; (Water Jacket Outlet) | 1 |
303-3357 Sensor Gp-Pressure
| 29***60 | Sensor Group-Pressure | 1 |
| 30***57 | Sensor Group-Pressure; -Atmospheric, . Spring | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
210-1747 Sensor Gp-Pressure
| 16***04 | Sensor Group-Pressure; (Turbocharger Outlet) | 1 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
267-1402 Sensor Gp-Pressure -Injection Actuation
| 21***67 | Seal-O-Ring | 1 |
| 24***69 | Sensor Group-Pressure | 1 |
| 26***02 | Sensor Group-Pressure; -Injection Actuation | 1 |
197-8394 Sensor Gp-Pressure
| 16***05 | Sensor As-Pressure; (Unfiltered Engine Oil) | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
236-6221 Sensor Gp-Speed -Engine Timing
| 23***21 | Sensor Group-Speed; -Engine Timing | 1 |
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
234-5013 Sensor Gp-Temperature
| 23***13 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
145-7028 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***28 | Sensor Group-Temperature; -Hydraulic Oil Temp | 1 |
| 15***43 | Sleeve; (2.8-Dm) | 0 |
274-7396 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
| 27***96 | Sensor Group-Temperature; -Engine Coolant | 1 |
197-8392 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 0 |
| 19***92 | Sensor Group-Temperature; -Coolant, Water | 1 |
234-5012 Sensor Gp-Temperature
| 23***12 | Sensor Group-Temperature; -Coolant, Water | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
| 6V***09 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
197-8391 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
274-7395 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
249-9223 Starting Aid Gp -Wiring
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 13***43 | Boot; (Red)(Red) | 1 |
| 20***77 | Bolt-Flange Head; (M8x1x25-mm) | 2 |
231-3949 Starting Aid Gp -Air Inlet Heater
| 11***32 | Wire As | 1 |
| 19***41 | Cover-Terminal | 2 |
| 22***77 | Switch Group-Magnetic; -Air Inlet Heater Relay | 1 |
339-7782 Starting Aid Gp-Ether
| 13***00 | Clip; (Tab) | 2 |
| 17***69 | Tube; (250 cm) | 0 |
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
339-7783 Starting Aid Gp-Ether
| 33***14 | Wiring Group-Ether Starting Aid | 1 |
| 33***82 | Starting Aid Group-Ether | 1 |
| 33***83 | Starting Aid Group-Ether | 1 |
132-1418 Starting Motor Gp-Electric
| 10***08 | Bolt (M10x1.5x35mm); (M10x1.5x35-mm) | 3 |
| 13***18 | Starting Motor Group-Electric | 1 |
| 13***30 | Wire As | 1 |
128-5626 Starting Motor Gp-Electric -Cold Weather
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
| 12***26 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
207-1541 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***02 | Housing As | 1 |
| 20***41 | Starting Motor Group-Electric | 1 |
207-1551 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***02 | Housing As | 1 |
| 19***70 | Solenoid As-Starting Motor; (24-Volt)(Starting Motor) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
8n-0694 Switch As-Toggle
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 6T***31 | Nut-Hexagon-(15/32-32 Thd) | 2 |
| 6T***32 | Lockwasher 15.08mm(.59in.)O.D. | 1 |
172-8660 Switch Gp-Liquid Level -Hydraulic Tank
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
223-7577 Switch Gp-Magnetic -Air Inlet Heater
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 20***77 | Bolt-Flange Head; (M8x1x25-mm) | 2 |
118-3534 Switch Gp-Magnetic
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
| 17***09 | Switch Group-Magnetic; -24-Volt-Start Relay | 1 |
167-0138 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
209-5582 Switch Gp-Magnetic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 2 |
175-2308 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
175-2309 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***81 | Switch As-Magnetic; (Start Relay) | 1 |
241-8368 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
254-3783 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
258-0883 Switch Gp-Pressure -Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Pressure; -Fuel Filter, Differential-Fuel Filter | 1 |
239-1134 Valve Gp-Ether Starting
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***34 | Valve Group-Ether Starting | 1 |
191-2846 Wiring Gp-Console -Auxiliary Steering
| 19***46 | Wiring Group-Console; -Auxiliary Steering | 1 |
| 19***70 | Harness As; (Auxiliary Steering) | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 6 |
198-2714 Wiring Gp-Engine
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
330-6022 Wiring Gp-Engine
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
339-3814 Wiring Gp-Ether Starting Aid
| 17***15 | Strap; (Dual Clamp) | 4 |
| 33***23 | Harness As-Solenoid | 1 |
| 33***14 | Wiring Group-Ether Starting Aid | 1 |
250-4373 Wiring Gp-Machine -Rear
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***18 | Clip | 1 |
| 13***40 | Resistor As-Connection; (3-Pin) | 1 |
249-3293 Wiring Gp-Machine -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***01 | Plate-Face | 1 |
| 11***29 | Cap-Dust | 1 |
249-3291 Wiring Gp-Machine -Lh
| 11***01 | Plate-Face | 2 |
| 11***29 | Cap-Dust | 1 |
| 11***18 | Clip | 6 |
235-3549 Wiring Gp-Panel
| 13***89 | Clip; (Ladder) | 1 |
| 19***81 | Circuit Breaker As; (35-Ampere)(Generator) | 1 |
| 1M***43 | Grommet | 1 |
229-8249 Wiring Gp-Power Train
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
229-3118 Wiring Gp-Screed -Diesel Heat
| 19***98 | Panel Group-Electronic; -Material Height-Rh | 1 |
| 19***99 | Panel Group-Electronic; -Material Height-Lh | 1 |
| 22***18 | Wiring Group-Screed; -Diesel Heat | 1 |
229-3119 Wiring Gp-Screed -Electric Heat
| 17***65 | Plug As-Connector | 2 |
| 19***99 | Panel Group-Electronic; -Material Height-Lh | 2 |
| 22***19 | Wiring Group-Screed; -Electric Heat | 1 |
235-3547 Wiring Gp-Screed -Electric Heat
| 23***47 | Wiring Group-Screed; -Electric Heat | 1 |
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 4 |
| 28***80 | Harness As-Screed | 1 |
Electrical System
196-1299 Panel Gp-Electronic -Material Height-Lh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 13***48 | Potentiometer As; (Rh Conveyor Speed Dial) | 1 |
196-1298 Panel Gp-Electronic -Material Height-Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***83 | Relay-Time Delay; (Electric Heat) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
Engine Arrangement
223-7844 Engine Ar-Complete
| 11***61 | Belt Tensioner Group | 1 |
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
223-9994 Engine Ar-Core
| 11***43 | Cooler Group-Engine Oil | 1 |
| 16***46 | Housing Group-Front | 1 |
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
222-2602 Installation Ar-Engine
| 22***02 | Installation Ar-Engine | 1 |
| 22***44 | Engine Ar-Complete | 1 |
| 23***04 | Radiator & Hydraulic Oil Cooler Group | 1 |
Feeder Drag And Auger Conveyors
106-9718 Bearing Gp-Auger
| 01***41 | Setscrew-Socket | 3 |
| 10***18 | Bearing Group-Auger | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
116-9509 Bearing Gp-Auger
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***09 | Bearing Group-Auger | 1 |
201-5584 Bearing Gp-Auger
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
| 20***84 | Bearing Group-Auger | 1 |
280-9922 Chain Gp-Conveyor
| 28***22 | Chain Group-Conveyor | 1 |
| 28***79 | Bar-Side | 244 |
| 28***80 | Foam Insulation; 40 X 60 X 644 mm, Bar-Side | 122 |
134-6432 Chain Gp-Conveyor -Lh
| 13***32 | Chain Group-Conveyor; -Lh | 1 |
| 8I***14 | Bar-Side | 61 |
| 8I***15 | Bar-Side | 31 |
119-6653 Chain Gp-Conveyor -Rh
| 11***53 | Chain Group-Conveyor; -Rh | 1 |
| 8I***14 | Bar-Side | 61 |
| 8I***15 | Bar-Side | 31 |
119-6652 Chain Gp-Conveyor
| 11***52 | Chain Group-Conveyor | 1 |
| 11***53 | Chain Group-Conveyor; -Rh | 1 |
| 13***32 | Chain Group-Conveyor; -Lh | 1 |
224-5776 Conveyor & Mtg Gp-Auger
| 09***69 | Bolt | 4 |
| 10***55 | Plate | 1 |
| 11***15 | Step As | 1 |
222-2600 Conveyor Ar-Drag & Auger
| 10***77 | Footshaft Group | 2 |
| 11***46 | Conveyor Group-Drag | 2 |
| 22***00 | Conveyor Ar-Drag & Auger | 1 |
230-5481 Conveyor Gp-Auger
| 10***85 | Plate | 2 |
| 10***91 | Pipe | 2 |
| 10***96 | Plate | 1 |
115-8346 Conveyor Gp-Drag
| 05***20 | Pin-Spring | 60 |
| 11***46 | Conveyor Group-Drag | 1 |
| 12***59 | Bar-Feeder; (Conveyor) | 30 |
243-1149 Door Gp-Access
| 10***56 | Rod; (Prop) | 1 |
| 11***77 | Bumper-Rubber | 12 |
| 14***03 | Screw-Button Head; (M10x1.5x30-mm) | 24 |
228-6808 Drive Gp-Conveyor
| 10***99 | Sprocket As; (12-Teeth) | 2 |
| 13***92 | Key-Square | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
199-4206 Extension Gp-Auger -12-In, Lh
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
231-3532 Extension Gp-Auger -6-In
| 23***32 | Extension Group-Auger; -6-In | 1 |
| 31***84 | Tube | 2 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 2 |
231-2042 Extension Gp-Auger -24-In, Rh
| 23***42 | Extension Group-Auger; -24-In, Rh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
231-2043 Extension Gp-Auger -24-In, Lh
| 23***43 | Extension Group-Auger; -24-In, Lh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
198-8287 Extension Gp-Auger -12-In, Rh
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
243-0329 Extension Gp-Auger -18-In
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 23***32 | Extension Group-Auger; -6-In | 1 |
104-7477 Footshaft Gp
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
228-6807 Guard Gp-Conveyor
| 12***30 | Plate | 2 |
| 12***54 | Screw-Flat Head; (M12x1.75x35-mm) | 64 |
| 19***32 | Guard As | 4 |
241-3280 Hydraulic Ar-Conveyor
| 23***95 | Pump & Mtg Group-Conveyor | 1 |
| 23***96 | Motor & Mtg Group-Conveyor | 1 |
| 23***97 | Motor & Mtg Group-Auger | 1 |
230-9596 Motor & Mtg Gp-Conveyor
| 11***80 | Elbow | 1 |
| 14***72 | Elbow Group | 4 |
| 14***09 | Plug As-Sto | 2 |
341-9466 Planetary Gp-Auger -Conveyor
| 09***92 | Pin-Spring | 2 |
| 13***16 | Kit-Washer; (Planetary) | 1 |
| 13***30 | Plug-Magnetic; (Planetary) | 1 |
192-7962 Planetary Gp-Conveyor
341-9467 Planetary Gp-Conveyor -Drag
| 09***92 | Pin-Spring | 2 |
| 23***88 | Pin-Spring | 2 |
| 24***79 | Plug-Magnetic; (Planetary) | 1 |
190-6345 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 15***84 | Cone | 2 |
| 15***85 | Cup | 2 |
272-7275 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 15***84 | Cone | 2 |
| 15***85 | Cup | 2 |
351-4455 Pump & Mtg Gp-Conveyor
| 14***15 | Connector As | 2 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
230-9595 Pump & Mtg Gp-Conveyor
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 14***15 | Connector As | 1 |
| 14***39 | Connector As. | 5 |
228-6806 Shaft Gp-Feeder Drive
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 4 |
| 10***30 | Bearing-Flange | 2 |
| 10***70 | Key-Square | 2 |
Frame And Body
225-2317 Arm Gp-Drop
| 11***99 | Pin As-Pivot | 2 |
| 13***20 | Shaft | 2 |
| 13***77 | Lockout | 2 |
253-1002 Arm Gp-Drop
| 10***68 | Nipple-Pipe | 2 |
| 11***99 | Pin As-Pivot | 2 |
| 25***02 | Arm Group-Drop | 1 |
241-4248 Arm Gp-Tow
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 19***19 | Roller | 4 |
| 19***20 | Shaft | 2 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
315-1101 Brace Gp
| 1A***68 | Nut | 1 |
| 31***01 | Brace Group | 1 |
| 31***02 | Plate As | 1 |
232-1107 Bracket Gp-Support
| 22***51 | Bracket | 1 |
| 23***07 | Bracket Group-Support | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
239-5628 Carriage Gp-Extender
| 18***25 | Scraper; (Brass) | 4 |
| 19***57 | Scraper As | 4 |
| 1A***68 | Nut | 6 |
243-0992 Cover Gp-Access
| 20***04 | Plate | 2 |
| 23***62 | Plate | 2 |
| 24***84 | Plate | 1 |
197-5297 Deflector Gp
| 16***24 | Rod-Threaded | 4 |
| 16***25 | Rod-Threaded | 4 |
| 16***26 | Turnbuckle | 4 |
8i-0292 Deflector Gp
| 10***31 | Nut-Spring | 8 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 8 |
| 16***59 | Plate As; (Lh) | 1 |
231-1982 Extension Gp-Main Frame -12-In
| 10***88 | Extension As | 1 |
| 23***82 | Extension Group-Main Frame; -12-In | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
215-7553 Extension Gp-Main Frame
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
241-9358 Extension Gp-Main Frame
| 12***73 | Extension As | 2 |
| 12***79 | Bar | 2 |
| 12***20 | Shim; (1.65-mm Thk) | 4 |
231-1983 Extension Gp-Main Frame -24-In
| 10***90 | Extension As | 1 |
| 23***83 | Extension Group-Main Frame; -24-In | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
222-2613 Frame Gp-Main
| 22***13 | Frame Group-Main | 1 |
| 22***14 | Frame As | 1 |
| 22***68 | Frame As | 1 |
286-9444 Frame Gp-Screed
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
120-5905 Frame Gp-Screed
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
197-5287 Frame Gp-Screed
| 10***68 | Grip-Handle | 2 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 6 |
| 16***62 | Cover-Inspection | 2 |
145-9438 Gate Gp-End
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***68 | Grip-Handle | 2 |
| 10***70 | Support As | 2 |
216-6989 Gate Gp-End
| 10***68 | Grip-Handle | 2 |
| 10***35 | Support As | 2 |
| 10***09 | Chain; (14-In Each) | 0 |
273-9969 Guide Gp-Steering
| 19***54 | Chain | 1 |
| 27***69 | Guide Group-Steering | 1 |
| 27***65 | Bar | 1 |
199-4196 Guide Gp-Steering
| 03***74 | Keeper | 1 |
| 10***39 | Tube As | 1 |
| 10***78 | Block | 1 |
230-5042 Hopper Gp
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 10***23 | Round | 2 |
| 12***35 | Flashing | 2 |
252-5007 Lines Gp-Grease
| 14***20 | Connector As | 2 |
| 14***85 | Elbow; (45°) | 8 |
| 14***89 | Elbow As | 6 |
253-7898 Lock Gp-Transport
| 16***89 | Bolt-Hex Head; (M16x2x55mm) | 2 |
| 25***97 | Bar | 2 |
| 25***98 | Lock Group-Transport | 1 |
245-9080 Plate Gp-Screed -Electric Heat, 24-In
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 2 |
245-9078 Plate Gp-Screed -Electric Heat, 28-In
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 2 |
245-9077 Plate Gp-Screed -Electric Heat, 12-In
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 1 |
245-9079 Plate Gp-Screed -Electric Heat, 12-In
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 1 |
231-1956 Support Gp-Frame
| 10***89 | Brace Group | 1 |
| 23***56 | Support Group-Frame | 1 |
| 23***07 | Bracket Group-Support | 1 |
243-2052 Suppression Gp-Sound
| 20***48 | Panel-Foam | 1 |
| 23***90 | Foam | 1 |
| 23***91 | Foam | 1 |
241-8415 Ventilation Gp-Paver
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***04 | Housing As-Blower | 1 |
292-9232 Ventilation Gp-Paver
| 10***25 | Hinge Assem. | 1 |
| 15***02 | Gauge-Differential Pressure; (Paver Ventilation) | 1 |
| 15***03 | Bracket-Gauge | 1 |
Fuel System
233-5034 Control Gp-Decelerator
| 09***12 | Spring | 2 |
| 11***18 | Clip | 2 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 2 |
226-7515 Filter & Lines Gp-Fuel
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
295-1410 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
268-1835 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 1 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
328-2585 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
249-5162 Lines Gp-Fuel
| 10***09 | Cap As-Filler; (Fast Fill Fuel) | 1 |
| 11***98 | Hose Assem. | 1 |
| 12***85 | Hose As | 1 |
191-0461 Lines Gp-Injector Hyd Pump
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
| 20***80 | Hose As | 1 |
247-7116 Plug Gp-Fuel Tank
| 14***11 | Plug Group | 2 |
| 24***16 | Plug Group-Fuel Tank | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
222-5900 Pump & Mtg Gp-Unit Inj Hyd
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 22***00 | Pump & Mtg Group-Unit Inj Hydraulic | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
192-4302 Pump Gp-Fuel
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
| 13***76 | Strainer; (Fuel Pump) | 1 |
268-1839 Pump Gp-Fuel Injection
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 26***39 | Pump Group-Fuel Injection | 1 |
| 32***85 | Injector Group-Fuel | 1 |
222-5958 Pump Gp-Fuel Injection
| 22***58 | Pump Group-Fuel Injection | 1 |
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 29***10 | Injector Group-Fuel | 1 |
249-6644 Pump Gp-Fuel Transfer
| 10***87 | Connector | 1 |
| 10***05 | Plate | 3 |
| 11***72 | Filter Group-Fuel; (Fuel) | 1 |
304-0677 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
254-4357 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
319-0677 Pump Gp-Unit Injector Hyd
| 15***36 | Cartridge | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 1F***60 | Washer Roll-Over Group To Deck | 1 |
295-4777 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
312-0677 Pump Gp-Unit Injector Hyd
| 16***36 | Bolt-Socket Head; (M5x0.8x18-mm) | 3 |
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
232-0343 Regulator Gp-Fuel Pressure
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
205-1306 Regulator Gp-Fuel Pressure
| 19***38 | Elbow Assem. | 0 |
| 20***06 | Name-Plate (Portuguese), Regulator Group-Fuel Pressure | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
149-2683 Separator Gp-Water
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
Grade References
109-5624 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5622 Leveler Gp -40-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5626 Leveler Gp -Outboard
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5627 Leveler Gp -40-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5623 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5625 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 7 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5628 Leveler Gp -30-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
Hydraulic System
077-3951 Cap Gp-Hydraulic Oil Filler
| 07***51 | Cap As-Filler Breather | 1 |
| 07***32 | Filter Element-Breather; (Hydraulic Oil Filter) | 1 |
| 07***26 | Gasket | 2 |
236-2087 Cover Gp -Without Ventilation
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
| 20***34 | Plate-Cover | 1 |
| 23***87 | Cover Group; -Without Ventilation | 1 |
236-2088 Cover Gp -Without Generator
| 14***11 | Plug Group | 1 |
| 16***16 | Plug As | 1 |
| 23***88 | Cover Group; -Without Generator | 1 |
230-9611 Cylinder & Mtg Gp-Auger
| 14***68 | Elbow Group | 4 |
| 17***51 | Pin-Clevis | 4 |
| 20***75 | Cylinder Group-Hydraulic; -Auger Hoist, Rh | 1 |
230-9608 Cylinder & Mtg Gp-Hopper
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 10***44 | Elbow | 1 |
| 13***06 | Pin As | 2 |
249-6635 Cylinder & Mtg Gp-Screed Hoist
| 14***74 | Elbow As | 2 |
| 16***88 | Elbow; (90-Deg) | 1 |
| 17***51 | Pin-Clevis | 4 |
249-6637 Cylinder & Mtg Gp-Steering
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 1A***68 | Nut | 1 |
249-6636 Cylinder & Mtg Gp-Tow Point
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 14***74 | Elbow As | 4 |
| 17***51 | Pin-Clevis | 2 |
203-4276 Cylinder Gp-Hydraulic -Auger Hoist, Lh
| 20***76 | Cylinder Group-Hydraulic; -Auger Hoist, Lh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 25***75 | Kit-Seal; (Auger Hoist) | 1 |
235-8826 Cylinder Gp-Hydraulic -Screed Hoist
| 23***05 | Kit-Seal; (Screed Hoist Cylinder) | 1 |
| 23***26 | Cylinder Group-Hydraulic; -Screed Hoist | 1 |
| 24***73 | Ring-Retaining | 1 |
197-9766 Cylinder Gp-Hydraulic -Slope
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 14***61 | Plug | 2 |
| 14***62 | Seal-Washer | 2 |
338-9798 Cylinder Gp-Hydraulic -Steering
| 33***98 | Cylinder Group-Hydraulic; -Steering | 1 |
203-4275 Cylinder Gp-Hydraulic -Auger Hoist, Rh
| 20***75 | Cylinder Group-Hydraulic; -Auger Hoist, Rh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 24***14 | Kit-Seal; (Auger Hoist) | 1 |
135-0220 Cylinder Gp-Hydraulic -Hopper
| 13***20 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 13***21 | Kit-Seal; (Hopper Cylinder) | 1 |
| 5E***32 | Ring | 1 |
195-2884 Cylinder Gp-Hydraulic -Tow Point
| 19***84 | Cylinder Group-Hydraulic; -Tow Point | 1 |
| 23***82 | Kit-Seal; (Tow Point Cylinder) | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
135-0217 Cylinder Gp-Hydraulic -Extender
| 03***39 | Ring-Back-Up | 1 |
| 12***75 | Ring-Wear | 2 |
| 13***17 | Cylinder Group-Hydraulic; -Extender | 1 |
146-3166 Cylinder Gp-Hydraulic -Steering
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 14***66 | Cylinder Group-Hydraulic; -Steering | 1 |
| 15***88 | Seal-Crown | 1 |
278-0616 Cylinder Gp-Hydraulic
| 20***62 | Kit-Seal; (Extender Cylinder) | 1 |
| 27***16 | Cylinder Group-Hydraulic | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
230-9601 Filter & Mtg Gp-Hydraulic -Vibratory
| 14***41 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***82 | Elbow As | 1 |
230-9594 Filter & Mtg Gp-Hydraulic -Charge, Propel
| 14***82 | Elbow As | 3 |
| 15***32 | Elbow As | 1 |
| 16***31 | Elbow As | 2 |
196-7614 Filter Gp-Oil -Hydraulic
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 19***14 | Filter Group-Oil; -Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 17***15 | Filter Group-Oil; -Hydraulic Tank | 1 |
192-0717 Filter Gp-Oil -Hydraulic
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 19***17 | Filter Group-Oil; -Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
255-4800 Hydraulic Ar -Truck Hitch
| 25***89 | Valve & Mtg Group-Truck Hitch | 1 |
| 25***90 | Lines Group-Truck Hitch | 1 |
| 25***00 | Hydraulic Ar; -Truck Hitch | 1 |
222-2601 Hydraulic Ar
| 22***01 | Hydraulic Ar | 1 |
| 23***86 | Hydraulic Ar-Fan | 1 |
| 23***87 | Tank & Mtg Group-Hydraulic | 1 |
241-3282 Hydraulic Ar-Auxiliary
| 23***02 | Pump & Mtg Group-Auxiliary | 1 |
| 23***03 | Valve & Mtg Group-Auxiliary | 1 |
| 23***04 | Valve & Mtg Group-Control; -Parking Brake Manual Release | 1 |
230-9586 Hydraulic Ar-Fan
| 23***86 | Hydraulic Ar-Fan | 1 |
| 23***22 | Lines Group-Hydraulic Fan | 1 |
| 23***23 | Pump & Mtg Group-Hydraulic Fan | 1 |
241-3281 Hydraulic Ar-Vibratory
| 23***99 | Valve & Mtg Group-Vibratory; -Vibratory Bypass | 1 |
| 23***01 | Filter & Mtg Group-Hydraulic; -Vibratory | 1 |
| 24***81 | Hydraulic Ar-Vibratory | 1 |
249-6640 Lines Gp-Brake & Shift
| 10***05 | Plate | 2 |
| 12***56 | Hose As | 4 |
| 14***67 | Elbow Group; (Each Includes) | 5 |
249-6632 Lines Gp-Conveyor
| 11***79 | Hose As | 1 |
| 11***87 | Hose As | 1 |
| 12***49 | Hose As | 1 |
249-6639 Lines Gp-Cylinder -Auger Hoist
| 10***03 | Plate-Cover | 5 |
| 10***05 | Plate | 2 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
311-4879 Lines Gp-Extender
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***36 | Elbow As. | 2 |
| 16***32 | Pin | 2 |
112-3469 Lines Gp-Extender
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 11***69 | Lines Group-Extender | 1 |
| 13***17 | Cylinder Group-Hydraulic; -Extender | 2 |
197-5289 Lines Gp-Extender
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 14***18 | Connector As | 2 |
| 14***74 | Elbow As | 2 |
251-2000 Lines Gp-Generator
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 13***75 | Hose As | 1 |
| 14***77 | Hose Assem. | 1 |
249-7691 Lines Gp-Grade & Slope
| 10***05 | Plate | 4 |
| 14***30 | Hose As | 4 |
| 14***30 | Hose As | 2 |
249-6638 Lines Gp-Hopper
| 10***05 | Plate | 7 |
| 10***06 | Plate As | 2 |
| 11***18 | Hose Assem. | 2 |
251-2087 Lines Gp-Hydraulic -Front Wheel Assist
| 10***03 | Plate-Cover | 1 |
| 11***35 | Hose As | 1 |
| 14***21 | Connector As | 2 |
230-9622 Lines Gp-Hydraulic Fan
| 10***21 | Hose As | 1 |
| 11***76 | Hose As | 1 |
| 14***12 | Reducer As-Orfs | 1 |
251-5853 Lines Gp-Paver Ventilation
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***17 | Reducer As-Orfs | 1 |
| 17***15 | Strap; (Dual Clamp) | 1 |
249-6641 Lines Gp-Pump -Auxiliary
| 11***66 | Hose Assem. | 1 |
| 14***44 | Plate-Retainer | 1 |
| 14***55 | Elbow As. | 1 |
249-6642 Lines Gp-Return
| 14***88 | Hose As | 1 |
| 17***15 | Strap; (Dual Clamp) | 1 |
| 19***07 | Bolt-Stacking; (M6x1x73-mm) | 2 |
230-9613 Lines Gp-Screed
| 10***05 | Plate | 4 |
| 14***09 | Hose As | 1 |
| 14***66 | Elbow Group | 2 |
311-1959 Lines Gp-Slope
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***84 | Pin As | 4 |
| 14***13 | Adapter Group | 1 |
197-5285 Lines Gp-Slope
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***84 | Pin As | 4 |
249-6643 Lines Gp-Steering
| 10***03 | Plate-Cover | 15 |
| 10***02 | Hose As | 1 |
| 14***88 | Hose As | 1 |
251-2090 Lines Gp-Truck Hitch
| 10***03 | Plate-Cover | 2 |
| 10***05 | Plate | 2 |
| 10***84 | Hose As | 2 |
230-7543 Lines Gp-Vibratory
| 10***05 | Plate | 7 |
| 14***09 | Adapter As | 2 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
112-3467 Lines Gp-Vibratory
| 07***84 | Clamp | 6 |
| 08***86 | Clamp | 2 |
| 10***84 | Hose As | 1 |
311-4878 Lines Gp-Vibratory
| 07***84 | Clamp | 3 |
| 08***86 | Clamp | 2 |
| 11***60 | Strap | 1 |
249-6633 Lines Gp-Vibratory
| 10***29 | Hose As | 1 |
| 14***80 | Elbow As | 1 |
| 14***55 | Union As | 2 |
251-8207 Manifold Gp-Control -Auxiliary
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***38 | Elbow | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
230-9605 Manifold Gp-Cooling -Return, Oil Cooler Bypass
| 14***09 | Adapter As | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
| 14***81 | Elbow Group | 1 |
230-9597 Motor & Mtg Gp-Auger
| 11***80 | Elbow | 1 |
| 14***27 | Connector Group | 4 |
| 14***72 | Elbow Group | 4 |
230-9659 Motor & Mtg Gp-Generator
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 15***37 | Elbow Group | 1 |
| 20***92 | Elbow As; (90-Deg) | 1 |
230-9624 Motor & Mtg Gp-Hydraulic Fan
| 14***23 | Connector As. | 2 |
| 14***65 | Elbow | 1 |
| 23***24 | Motor & Mtg Group-Hydraulic Fan | 1 |
241-8178 Motor & Mtg Gp-Propel
| 14***58 | Elbow As | 2 |
| 23***81 | Motor Group-Piston; -Propel | 2 |
| 24***78 | Motor & Mtg Group-Propel | 1 |
235-4847 Motor & Mtg Gp-Ventilation
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***74 | Elbow As | 1 |
| 15***50 | Elbow As | 1 |
230-9627 Motor Gp-Gear -Hydraulic Fan
| 14***15 | Dowel | 2 |
| 19***10 | Key-Woodruff | 1 |
| 23***27 | Motor Group-Gear; -Hydraulic Fan | 1 |
235-4849 Motor Gp-Gear -Paver Ventilation
| 23***49 | Motor Group-Gear; -Paver Ventilation | 1 |
| 26***11 | Kit-Seal; (Paver Ventilation Motor) | 1 |
308-2125 Motor Gp-Gear -Vibratory
| 30***25 | Motor Group-Gear; -Vibratory | 1 |
| 31***08 | Kit-Seal | 1 |
8i-0721 Motor Gp-Gerotor -Vibratory
| 06***39 | Seal-O-Ring | 1 |
| 16***21 | Kit-Bearing; (Vibratory Motor) | 1 |
| 4D***86 | Seal--Bushing To Selector Valve Group | 1 |
291-9243 Motor Gp-Piston
| 10***84 | Piston | 9 |
| 11***87 | Kit-Overhaul Seal | 1 |
| 11***34 | Bolt | 6 |
230-9384 Motor Gp-Piston -Conveyor
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
230-9381 Motor Gp-Piston -Propel
| 10***84 | Piston | 9 |
| 11***85 | Retainer-Guide | 1 |
| 11***86 | Shim-Retainer | 1 |
190-8789 Motor Gp-Piston -Auger
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
227-5104 Motor Gp-Piston -Generator
| 10***78 | Bearing-Roller | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
253-1397 Motor Gp-Piston -Front Wheel Assist, Lh
| 09***44 | Ring-Retaining | 1 |
| 10***19 | Ring-Retaining | 1 |
| 15***09 | Kit-Seal; (Front Wheel Assist Motor) | 1 |
253-1396 Motor Gp-Piston -Front Wheel Assist, Rh
| 09***44 | Ring-Retaining | 1 |
| 10***19 | Ring-Retaining | 1 |
| 15***09 | Kit-Seal; (Front Wheel Assist Motor) | 1 |
230-9602 Pump & Mtg Gp-Auxiliary
| 10***20 | Seal-O-Ring | 1 |
| 15***56 | Elbow As | 1 |
| 20***15 | Elbow As | 1 |
230-9657 Pump & Mtg Gp-Generator
| 11***01 | Seal (Rear Pump To Center Pump) | 1 |
| 14***16 | Connector Group | 1 |
| 14***90 | Elbow Group | 1 |
230-9623 Pump & Mtg Gp-Hydraulic Fan
| 14***55 | Elbow As. | 1 |
| 14***29 | Tee As-Orfs | 1 |
| 22***86 | Elbow | 1 |
241-8132 Pump & Mtg Gp-Propel
| 12***88 | Flange-Split | 6 |
| 13***53 | Union | 1 |
| 13***96 | Elbow | 1 |
245-1145 Pump Gp-Gear -Hydraulic Fan
| 10***73 | Nut-Track | 1 |
| 13***98 | Seal-Lip Type | 1 |
| 15***33 | Key | 1 |
333-3638 Pump Gp-Gear
| 23***03 | Kit-Seal; (Gear Pump)(Charge, Conveyor) | 1 |
| 33***38 | Pump Group-Gear | 1 |
232-1533 Pump Gp-Gear -Charge, Conveyor
| 23***33 | Pump Group-Gear; -Charge, Conveyor | 1 |
| 23***03 | Kit-Seal; (Gear Pump)(Charge, Conveyor) | 1 |
294-0857 Pump Gp-Gear
| 10***73 | Nut-Track | 1 |
| 13***98 | Seal-Lip Type | 1 |
| 15***33 | Key | 1 |
269-0533 Pump Gp-Piston
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 12 |
| 26***60 | Dowel | 4 |
| 26***33 | Pump Group-Piston; -Conveyor | 1 |
230-9378 Pump Gp-Piston -Propel, Lh
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 10***96 | Kit-Manifold | 1 |
| 10***01 | Swashplate | 1 |
333-7609 Pump Gp-Piston
| 33***09 | Pump Group-Piston | 1 |
333-7607 Pump Gp-Piston
| 33***07 | Pump Group-Piston | 1 |
230-9550 Pump Gp-Piston -Generator
| 00***54 | Cup-Roller Bearing | 1 |
| 03***48 | Cone-Bearing | 1 |
| 1P***72 | Cup-Roller Bearing | 1 |
230-9382 Pump Gp-Piston -Auger Conveyor, Drag Conveyor, Lh
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 07***53 | Pin; (Spring) | 2 |
| 11***30 | Link | 2 |
230-9385 Pump Gp-Piston -Auxiliary
| 00***91 | Cup-Roller Bearing | 1 |
| 07***35 | Kit-Bearing; (Auxiliary Pump) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
285-4088 Pump Gp-Piston -Propel, Rh
| 03***39 | Seal-O-Ring (Id=9.25mm) | 4 |
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
230-9383 Pump Gp-Piston -Auger Conveyor, Drag Conveyor, Rh
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 07***53 | Pin; (Spring) | 2 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 2 |
230-9379 Pump Gp-Piston -Propel, Rh
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 10***96 | Kit-Manifold | 1 |
| 10***01 | Swashplate | 1 |
285-4087 Pump Gp-Piston -Propel, Lh
| 03***39 | Seal-O-Ring (Id=9.25mm) | 4 |
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
230-9587 Tank & Mtg Gp-Hydraulic
| 03***06 | Seal (Use As Required) | 1 |
| 10***05 | Plate | 1 |
| 12***13 | Film-Instruction; (Hydraulic Oil Level) | 1 |
230-9588 Tank Gp-Hydraulic
| 07***51 | Cap As-Filler Breather | 1 |
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***14 | Seal-O-Ring (Id=9.80mm) | 4 |
230-9603 Valve & Mtg Gp-Auxiliary
| 09***86 | Coupling | 1 |
| 14***25 | Connector As. | 2 |
| 14***28 | Connector Assem. | 1 |
230-9604 Valve & Mtg Gp-Control -Parking Brake Manual Release
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***61 | Elbow Group | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
249-6634 Valve & Mtg Gp-Control -Steering
| 00***21 | Nut; (13/16-20-Thd) | 2 |
| 07***43 | Steering Column Group | 2 |
| 10***12 | Bracket As-Motor | 2 |
230-9658 Valve & Mtg Gp-Control -Generator
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***27 | Connector Group | 2 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
251-2083 Valve & Mtg Gp-Flow Divider -Front Wheel Assist
| 12***88 | Tee | 1 |
| 14***15 | Connector As | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
230-9625 Valve & Mtg Gp-Hydraulic Fan
| 11***20 | Elbow | 1 |
| 15***30 | Connector As | 1 |
| 23***25 | Valve & Mtg Group-Hydraulic Fan | 1 |
230-9607 Valve & Mtg Gp-Tow Point
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
| 14***74 | Elbow As | 4 |
251-2089 Valve & Mtg Gp-Truck Hitch
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***61 | Elbow Group | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
230-9599 Valve & Mtg Gp-Vibratory -Vibratory Bypass
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 1 |
| 15***59 | Tee Group | 1 |
| 16***74 | Tee Group | 1 |
230-9160 Valve Gp-Control -Truck Hitch
| 23***82 | Nut-Special | 1 |
| 23***60 | Valve Group-Control; -Truck Hitch | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
208-1632 Valve Gp-Control -Vibratory
| 19***47 | Valve Group-Control; (Vibratory) | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
251-4844 Valve Gp-Control -Generator
| 25***44 | Valve Group-Control; -Generator | 1 |
| 25***77 | Kit-Seal; (Generator Control Valve) | 1 |
| 25***79 | Valve As-Needle | 1 |
284-3559 Valve Gp-Control -Auxiliary
| 11***29 | Ring-Backup | 6 |
| 23***82 | Nut-Special | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
230-9628 Valve Gp-Control
| 22***81 | Coil | 1 |
| 22***82 | Seal-O-Ring | 1 |
| 22***83 | Nut-Knurl; (1/2-20-Thd) | 1 |
190-8803 Valve Gp-Control -Vibratory Bypass
| 19***03 | Valve Group-Control; -Vibratory Bypass | 1 |
| 22***80 | Valve Group-Control; (Vibratory Bypass) | 1 |
| 22***83 | Coil | 1 |
272-1594 Valve Gp-Control -Auxiliary
| 11***29 | Ring-Backup | 6 |
| 23***82 | Nut-Special | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
195-2880 Valve Gp-Counterbalance -Tow Point
| 03***53 | Seal-O-Ring; (08.92mm Id) | 2 |
| 11***16 | Kit-Seal; (Counterbalance Valve) | 1 |
| 19***77 | Valve Group-Counterbalance; (Tow Point) | 2 |
230-9389 Valve Gp-Flow Divider -Front Wheel Assist
| 22***90 | Nut | 1 |
| 22***91 | Seal-O-Ring | 1 |
| 23***89 | Valve Group-Flow Divider; -Front Wheel Assist | 1 |
276-6041 Valve Gp-Pump Control -Propel
| 03***39 | Seal-O-Ring (Id=9.25mm) | 4 |
| 12***42 | Gasket | 1 |
| 27***41 | Valve Group-Pump Control; -Generator | 1 |
276-6042 Valve Gp-Solenoid -Pump Control
| 26***51 | Kit-Seal; (Solenoid Valve)(Solenoid Valve) | 1 |
| 26***45 | Nut; (1/2-32-Thd) | 1 |
| 27***42 | Valve Group-Solenoid; -Pump Control | 1 |
103-3602 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 1 |
| 11***21 | Coil | 2 |
300-0504 Valve Gp-Solenoid -Extender, Slope
| 25***57 | Kit-Seal; (Check Valve) | 1 |
| 25***37 | Valve Group-Solenoid; (24-Volt) | 1 |
| 27***10 | Coil-Solenoid | 2 |
332-1453 Valve Gp-Solenoid
| 33***53 | Valve Group-Solenoid | 1 |
300-0505 Valve Gp-Solenoid
| 25***57 | Kit-Seal; (Check Valve) | 1 |
| 25***37 | Valve Group-Solenoid; (24-Volt) | 2 |
| 27***10 | Coil-Solenoid | 2 |
310-8017 Valve Gp-Solenoid
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 31***17 | Valve Group-Solenoid; -Piston Pump | 1 |
| 31***18 | Valve-Servo | 2 |
8i-0143 Vibratory Gp
| 09***99 | Fitting-Grease; (Hydraulic) | 3 |
| 10***95 | Bearing | 8 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
197-5294 Vibratory Gp
| 10***90 | Coupling | 4 |
| 10***95 | Bearing | 8 |
| 10***39 | Key-Square | 4 |
Implements
242-3916 Extension Ar -24-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 18***08 | Extension Group-Screed; -Diesel Heat, 24-In | 2 |
| 18***19 | Extension Group-Screed; -Diesel Heat, 12-In | 2 |
242-3911 Extension Ar
| 10***83 | Extension Ar; -Diesel Heat, 28-In | 2 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
106-3483 Extension Ar -Diesel Heat, 28-In
| 10***52 | Harness As-Screed; (Extension) | 1 |
| 10***83 | Extension Ar; -Diesel Heat, 28-In | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 8 |
242-3915 Extension Ar -22-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 18***08 | Extension Group-Screed; -Diesel Heat, 24-In | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
242-3914 Extension Ar -20-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 18***19 | Extension Group-Screed; -Diesel Heat, 12-In | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
106-3482 Extension Ar -Diesel Heat, 12-In
| 10***51 | Harness As-Screed; (Extension) | 1 |
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 5 |
241-9103 Extension Ar-Auger
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
| 21***53 | Extension Group-Main Frame | 1 |
242-3909 Extension Ar-Screed
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
253-4760 Extension Ar-Screed
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
253-4761 Extension Ar-Screed
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
253-4745 Extension Gp-Screed -Electric Heat, 24-In
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
245-9082 Extension Gp-Screed -Electric Heat With Vibration, 28-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***31 | Bar-Spacer | 1 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
245-9083 Extension Gp-Screed -Electric Heat, 12-In
| 1A***68 | Nut | 4 |
| 20***59 | Plate | 1 |
| 20***63 | Frame As | 1 |
259-2392 Extension Gp-Screed -24-Ft, 2-In
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
253-4744 Extension Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
259-2394 Extension Gp-Screed -22-Ft
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
185-5419 Extension Gp-Screed -Diesel Heat, 12-In
| 18***19 | Extension Group-Screed; -Diesel Heat, 12-In | 1 |
| 1A***68 | Nut | 4 |
| 20***59 | Plate | 1 |
185-5408 Extension Gp-Screed -Diesel Heat, 24-In
| 10***95 | Bearing | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
8i-0521 Extension Gp-Screed -Diesel Heat With Vibration, 28-In
| 10***95 | Bearing | 2 |
| 10***12 | Shaft As-Vibratory | 1 |
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
259-2391 Extension Gp-Screed -21-Ft, 6-In
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
259-2393 Extension Gp-Screed -20-Ft
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
245-9081 Extension Gp-Screed -Electric Heat, 12-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
259-2395 Extension Gp-Screed -24-Ft
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
245-9084 Extension Gp-Screed -Electric Heat With Vibration, 24-In
| 10***95 | Bearing | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
8i-0520 Extension Gp-Screed -Diesel Heat, 12-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
251-2088 Hitch Ar-Truck
| 25***88 | Hitch Ar-Truck | 1 |
| 25***89 | Valve & Mtg Group-Truck Hitch | 1 |
| 25***90 | Lines Group-Truck Hitch | 1 |
166-7676 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
276-3178 Hitch Gp-Truck
| 16***76 | Hitch Group-Truck; -Oscillating | 1 |
| 19***08 | Bar | 1 |
| 19***09 | Pin As | 1 |
256-2162 Roller Ar-Push
| 11***58 | Screw; 12-Point Screw, Screw, Roller Group-Push | 1 |
| 19***08 | Bar | 1 |
| 19***09 | Pin As | 1 |
118-8358 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 10 |
| 11***57 | Roller As | 1 |
| 11***58 | Screw; 12-Point Screw, Screw, Roller Group-Push | 1 |
112-1276 Shaft Gp-Drive -Eccentric Weight
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 11***76 | Shaft Group-Drive; -Eccentric Weight | 1 |
| 24***28 | Seal | 1 |
Lubrication System
191-0523 Adapter Gp-Oil Line -Fuel Injection Pump
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 19***22 | Adapter | 1 |
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
222-5946 Breather Gp
| 14***54 | Bolt; (M8x1.25x105-mm) | 1 |
| 16***10 | Breather As; (Crankcase) | 1 |
| 22***46 | Breather Group; -Crankcase | 1 |
233-9849 Filter Gp-Engine Oil
| 14***29 | Connector As | 1 |
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
220-1194 Fumes Disposal Gp
| 16***48 | Stud; (M8x1.25x40-mm, M8x1.25x17.5-mm) | 1 |
| 22***94 | Fumes Disposal Group | 1 |
| 22***10 | Hose-Disposal; (Fumes Disposal) | 1 |
280-7443 Gauge Gp-Oil Level (Dipstick) -Engine
| 14***50 | Tube As | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 28***70 | Gauge-Oil Level; (Dipstick)(Engine) | 1 |
223-9984 Gauge Gp-Oil Level (Dipstick) -Engine
| 14***50 | Tube As | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 22***84 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
117-5125 Lines Gp-Engine Oil
| 11***25 | Lines Group-Engine Oil | 1 |
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
159-0285 Lines Gp-Turbocharger Oil
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 15***85 | Lines Group-Turbocharger Oil; (Turbocharger Oil) | 1 |
| 15***18 | Tube As-Oil Drain | 1 |
237-8063 Manifold Gp-Engine Oil
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 4 |
| 22***96 | Manifold-Oil; (Engine) | 1 |
| 23***63 | Manifold Group-Engine Oil | 1 |
246-1569 Mounting Gp-Engine Oil Filter
| 17***20 | Strap-Dual Clamp | 3 |
| 24***69 | Mounting Group-Engine Oil Filter | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
247-2022 Mounting Gp-Oil Level Gauge
| 03***80 | Spacer; (9x16x36-mm) | 1 |
| 24***22 | Mounting Group-Oil Level Gauge | 1 |
| 8M***70 | Clip .5 In. (1.27 cm) I.D. Hole | 1 |
192-2981 Pump Gp-Engine Oil
| 19***81 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
200-4497 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
Machine Arrangement
222-2598 Chassis Ar -Ap-1000d
| 19***96 | Guide Group-Steering | 1 |
| 22***98 | Chassis Ar; -Ap-1000d | 1 |
| 22***13 | Frame Group-Main | 1 |
262-0721 Chassis Ar -Bg-260d
| 19***96 | Guide Group-Steering | 1 |
| 22***13 | Frame Group-Main | 1 |
| 23***42 | Hopper Group | 1 |
222-2596 General Ar -Ap-1000d
| 22***78 | Operator Ar | 1 |
| 22***96 | General Ar; -Ap-1000d | 1 |
| 22***97 | Drive Ar-Final | 1 |
262-0720 General Ar -Bg-260d
| 22***78 | Operator Ar | 1 |
| 22***97 | Drive Ar-Final | 1 |
| 22***99 | Electrical Ar | 1 |
222-2603 Installation Ar-Screed
| 22***03 | Installation Ar-Screed | 1 |
| 23***66 | Beam Group-Transverse | 1 |
| 24***48 | Arm Group-Tow | 1 |
195-9753 Kit-Maintenance
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
| 10***87 | Switch As-Toggle; (Screed Raise/Hld/Float) | 1 |
229-3115 Screed Ar -10-20b
| 11***67 | Lines Group-Vibratory | 1 |
| 11***69 | Lines Group-Extender | 1 |
| 11***39 | Platform Group | 1 |
231-4642 Screed Ar
| 19***85 | Lines Group-Slope | 1 |
| 19***87 | Frame Group-Screed | 1 |
| 19***88 | Crown Group | 1 |
Operator Station
291-2145 Console Gp-Instrument
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 46 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
230-3640 Console Gp-Instrument -Center
| 22***67 | Support As | 1 |
| 23***40 | Console Group-Instrument; -Center | 1 |
| 31***13 | Console Group-Instrument | 1 |
235-3509 Console Gp-Instrument -Center
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 46 |
| 10***84 | Relay As; (24-Volt) | 1 |
| 11***18 | Clip | 6 |
318-7413 Console Gp-Instrument
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 46 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
250-3397 Console Gp-Operator
| 10***05 | Cap-Receptacle | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 11***18 | Clip | 14 |
160-6567 Control Gp-Unprgmed Monitor -Caterpillar Monitoring System
| 16***67 | Control Group-Unprgmed Monitor; -Caterpillar Monitoring System | 1 |
| 25***03 | Control Group-Unprogrammed; (Caterpillar Monitoring System)(Caterpillar Monitoring System) | 1 |
330-6089 Display Gp-Monitor -Unprogrammed
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 14***44 | Plug As-Connector; (70-Pin) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
348-3782 Display Gp-Monitor -Accugrade
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 10 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
330-6558 Display Gp-Monitor -Accugrade
| 15***62 | Knob | 2 |
| 2M***19 | Ring-Retaining | 2 |
| 32***46 | Box Group-Control | 1 |
243-1782 Floor Mat Gp
| 20***00 | Floor Mat; (Operator Station Floor) | 1 |
| 20***02 | Floor Mat; (Operator Station Floor) | 1 |
| 23***93 | Tread | 1 |
233-3564 Guard Gp-Vandalism
| 21***13 | Handle | 4 |
| 23***64 | Guard Group-Vandalism | 1 |
| 24***68 | Cover | 1 |
132-3090 Lever Gp-Propel
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
101-9559 Lock Gp-Rotation
| 10***59 | Lock Group-Rotate | 1 |
| 10***60 | Plate | 1 |
| 13***64 | Bushing | 2 |
166-6943 Module Gp-Quad Gauge
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 16***43 | Module Group-Quad Gauge; -Fuel Level-Engine Coolant Temperature-Hydraulic Oil Temp-Engine Oil Pressure | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
222-2578 Operator Ar
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 22***78 | Operator Ar | 1 |
| 23***57 | Platform Group-Operator; -Lh | 1 |
228-9128 Panel Gp-Instrument -Operator Console
| 08***41 | Switch As-Toggle; (Lh Feeder Auto/Manual Control) | 1 |
| 08***12 | Lens-Clear; (Hazard Warning Lights) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
235-3511 Panel Gp-Instrument -Center Console
| 10***66 | Bezel | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***87 | Start Switch Assembly; (Key)(Engine) | 1 |
197-5295 Platform Gp
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 2 |
| 19***01 | Bracket | 2 |
| 19***03 | Platform As; (Extender) | 2 |
118-4339 Platform Gp
| 11***14 | Platform As-Top | 1 |
| 11***39 | Platform Group | 1 |
| 12***51 | Support As-Platform; (Rh Outer) | 1 |
231-7162 Platform Gp-Operator -Rh
| 10***59 | Lock Group-Rotate | 1 |
| 16***22 | Screw-Button Head; (M8x1.25x30-mm) | 2 |
| 19***45 | Cover As-Console; (Operator) | 1 |
231-7157 Platform Gp-Operator -Lh
| 10***59 | Lock Group-Rotate | 1 |
| 16***22 | Screw-Button Head; (M8x1.25x30-mm) | 2 |
| 19***45 | Cover As-Console; (Operator) | 1 |
247-1873 Platform Gp-Operator
| 24***73 | Platform Group-Operator | 1 |
| 24***03 | Platform As; (Rh) | 1 |
| 24***04 | Platform As; (Lh) | 1 |
235-3151 Seat Gp-Suspension -Vinyl
| 19***32 | Kit-Foam Back | 1 |
| 20***36 | Kit-Damper | 1 |
| 20***37 | Kit-Seat; (Indicators) | 1 |
199-4298 Seat Gp-Suspension -Vinyl
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 2 |
187-6649 Umbrella Gp
| 18***49 | Umbrella Group; -Ap-650b | 1 |
106-8541 Umbrella Gp
| 10***41 | Umbrella Group; -Bg-225c | 1 |
Power Train
251-2178 Assist Gp-Front Wheel
| 00***31 | Cup-Bearing | 4 |
| 00***43 | Nut | 2 |
| 03***01 | Screw; (5/16-18x1.56-In) | 4 |
222-2597 Drive Ar-Final
| 22***97 | Drive Ar-Final | 1 |
| 24***73 | Drive Group-Final | 2 |
241-4273 Drive Gp-Final
| 0T***56 | Bolt (2 1/2" Long) | 20 |
| 13***48 | Mount-Planetary | 1 |
| 14***06 | Shim; (0.05-mm Thk) | 6 |
352-2524 Drive Gp-Hydrostatic
| 27***40 | Kit-Seal; (Pump Drive) | 1 |
| 27***41 | Kit-Bearing | 1 |
| 32***90 | Gauge-Sight; (Oil Level) | 1 |
241-3279 Hydraulic Ar-Propel
| 23***94 | Filter & Mtg Group-Hydraulic; -Charge, Propel | 1 |
| 24***79 | Hydraulic Ar-Propel | 1 |
| 24***32 | Pump & Mtg Group-Propel | 1 |
249-6631 Lines Gp-Propel
| 11***72 | Hose As | 1 |
| 11***13 | Hose As | 1 |
| 12***01 | Hose As | 1 |
325-4687 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 13***67 | Piston-Brake | 1 |
| 15***84 | Cone | 2 |
321-9805 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 15***84 | Cone | 2 |
| 15***85 | Cup | 2 |
119-8698 Wheel & Tire Gp
| 10***34 | Extension-Valve | 1 |
| 10***35 | Valve-Rim | 1 |
| 10***52 | Tire; (Tire 18.00 X 25-36 Ply) | 1 |
344-7092 Wheel & Tire Gp -Driven
| 12***11 | Tire-Solid; (8in) | 2 |
| 34***91 | Wheel As | 1 |
| 34***92 | Wheel & Tire Group; -Driven | 1 |
119-8107 Wheel & Tire Gp
| 11***05 | Wheel As | 1 |
| 11***07 | Wheel & Tire Group | 1 |
| 12***11 | Tire-Solid; (8in) | 2 |
277-7809 Wheel & Tire Gp
| 10***34 | Extension-Valve | 1 |
| 10***35 | Valve-Rim | 1 |
| 11***84 | Tire; (16-R25)(16x25 Xgc) | 1 |
124-3042 Wheel & Tire Gp
| 08***24 | Tire; (Tubeless 18x25-16ply) | 1 |
| 12***42 | Wheel & Tire Group | 1 |
| 18***59 | Wheel Group | 1 |
124-3041 Wheel Ar
| 12***41 | Wheel Ar | 1 |
| 12***42 | Wheel & Tire Group | 2 |
119-8102 Wheel Ar
| 11***02 | Wheel Ar | 1 |
| 11***98 | Wheel & Tire Group | 2 |
277-7810 Wheel Ar
| 27***09 | Wheel & Tire Group | 2 |
| 27***10 | Wheel Ar | 1 |
277-7808 Wheel Gp
| 27***07 | Wheel As | 1 |
| 27***08 | Wheel Group | 1 |
| 2D***43 | Seal-O-Ring | 1 |
183-1160 Wheel Gp
| 11***25 | Wheel As | 1 |
| 18***60 | Wheel Group | 1 |
| 1J***87 | Flange | 2 |
180-8059 Wheel Gp
| 12***43 | Wheel As | 1 |
| 18***59 | Wheel Group | 1 |
| 4K***79 | Seal-O-Ring | 1 |
Service Equipment And Supplies
254-1564 Film Gp -English
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
| 08***52 | Decal-Caution, Hopper Support | 2 |
| 19***40 | Film-Warning; (Grade Limit) | 1 |
279-7132 Film Gp -Portuguese
| 17***92 | Film-Warning; (Mounting) | 2 |
| 17***93 | Film-Warning; (Hopper Support) | 2 |
| 21***64 | Plate-Warning; (Shutdown) | 1 |
279-7130 Film Gp -French
| 15***15 | Film-Warning; (Hopper Support) | 2 |
| 15***34 | Film-Warning; (Mounting) | 2 |
| 21***62 | Plate-Warning; (Starting, Shutdown) | 1 |
279-7129 Film Gp -Spanish
| 17***80 | Film-Warning; (Mounting Machine) | 2 |
| 17***81 | Film-Warning; (Hopper Support) | 2 |
| 21***63 | Plate-Warning; (Starting, Shutdown) | 1 |
243-5024 Plate & Film Gp
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 2 |
| 12***13 | Film; (Tow Point Cylinder) | 2 |
262-0722 Plate & Film Gp
| 11***73 | Film-Stripe; (450-cm Each) | 0 |
| 11***75 | Film-Identification; (Barber-Greene)(Barber-Greene) | 3 |
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
254-0056 Plate & Film Gp
| 08***54 | Film-Notice; (Screed Retract) | 2 |
| 10***08 | Film; (Screed Adjustment)(Extender Screed) | 1 |
| 10***14 | Handle | 1 |
254-0054 Plate & Film Gp
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 2 |
| 15***79 | Film-Instruction; (Grease)(Instructions) | 2 |
| 16***89 | Tack-Fastener | 4 |
201-7598 Pump & Motor Gp-Washdown -Fuel Transfer
| 08***68 | Spacer | 1 |
| 17***71 | Motor Group-Electric; -Fuel Transfer Pump | 1 |
| 19***02 | Pump Group-Fuel | 1 |
266-4529 Pump & Motor Gp-Washdown -Water
| 26***29 | Pump & Motor Group-Washdown; -Water-Emulsion-Diesel Fuel | 1 |
| 31***68 | Kit-Diaphragm | 1 |
| 31***69 | Kit-Valve | 1 |
262-3878 Tank Gp-Emulsion
| 26***70 | Tank As | 1 |
| 26***78 | Tank Group-Emulsion | 1 |
| 4B***82 | Ball; (9.52mm) | 1 |
263-2205 Washdown Gp-Ecology
| 00***14 | Coupling-Pipe | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Hose As | 1 |
Slope And Grade Control
233-3566 Beam Gp-Transverse
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 19***78 | Pad | 2 |
| 23***66 | Beam Group-Transverse | 1 |
168-6500 Cable Gp-Control -Grade
| 10***63 | Clamp | 1 |
| 11***95 | Plug | 1 |
| 11***63 | Cable; (Coiled) | 1 |
239-3467 Control Gp-Grade & Slope
| 12***36 | Bracket-Mounting | 2 |
| 13***85 | Mount As | 2 |
| 13***87 | Plate | 2 |
209-3130 Control Gp-Grade & Slope
| 11***10 | Screw-Pan Head | 8 |
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
336-1300 Control Gp-Grade & Slope -Accugrade
| 09***49 | Bolt; (M8x1.25x40-mm) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
209-3125 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***97 | Plug | 1 |
209-3126 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***97 | Plug | 1 |
168-5031 Control Gp-Grade & Slope
| 14***22 | Cover | 1 |
| 14***25 | Seal-Bushing | 1 |
| 14***26 | Gasket | 1 |
122-0094 Sensor Gp-Grade
| 11***29 | Cap-Dust | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
122-0095 Sensor Gp-Grade -Sonic
| 11***29 | Cap-Dust | 1 |
| 12***95 | Sensor Group-Grade; -Sonic | 1 |
| 14***16 | Faceplate | 1 |
209-3132 Sensor Gp-Grade -Averaging Ski
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
122-0090 Sensor Gp-Grade -Averaging Ski
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 12***99 | Arm-Follower | 1 |
197-7848 Sensor Gp-Grade -Sonic
| 12***91 | Sensor Group-Sonic; -Grade | 1 |
| 19***48 | Sensor Group-Grade; -Sonic | 1 |
| 19***54 | Tube As | 1 |
209-3131 Sensor Gp-Grade -Sonic
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
197-7847 Sensor Gp-Grade -Averaging Ski
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 19***47 | Sensor Group-Grade; -Averaging Ski | 1 |
| 19***54 | Tube As | 1 |
348-3783 Sensor Gp-Sonic
| 09***49 | Bolt; (M8x1.25x40-mm) | 4 |
| 13***39 | Screw-Flat Head; (M8x1.25x30-mm) | 4 |
| 27***73 | Clip | 2 |
122-0091 Sensor Gp-Sonic -Grade
| 12***91 | Sensor Group-Sonic; -Grade | 1 |
| 12***95 | Sensor Group-Grade; -Sonic | 1 |
| 13***83 | Cable As | 1 |
258-6580 Sensor Gp-Sonic -Averaging Ski
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
257-6255 Ski Gp-Averaging
| 25***29 | Mount As | 2 |
| 25***30 | Mount As | 2 |
| 25***55 | Ski Group-Averaging | 1 |
Undercarriage
251-2085 Bogie Gp
| 00***31 | Cup-Bearing | 8 |
| 00***43 | Nut | 4 |
| 03***01 | Screw; (5/16-18x1.56-In) | 4 |
BG-260D serial number reference
The PIN plate on a Cat wheel paver is a riveted metal tag on the main frame of the tractor unit, usually near the operator's platform on the right-hand side; a separate plate on the engine gives the engine serial number. The first three characters of the PIN are the prefix, which identifies the specific model and build series; the digits that follow are the sequential unit number within that prefix.
| Prefix | Identifies | Notes |
|---|---|---|
| BPW | BG-260D wheel-type asphalt paver, all configurations | Single serial prefix documented for this model, starting at BPW00001-up. Machine carries the C7 turbocharged diesel with ACERT, rated about 167 kW (224 hp) at 2200 rpm. A unit at BPW00124 is documented as a 2008 build, so the prefix was active in production that year; exact introduction and end-of-production years are not confirmed in public sources. Internal running-change breakpoints exist within this same prefix (for example on the propel pump around BPW102-up and the radiator/oil cooler group around BPW131-up) but these are mid-run component updates, not separate PIN prefixes. |
Frequently asked questions
What engine powers the Caterpillar BG-260D asphalt paver?
A Cat C7 ACERT turbocharged six-cylinder diesel with HEUI fuel injection, rated at a gross 167 kW (224 hp) at 2200 rpm with 872 N·m of torque. The same engine and chassis platform powers the Cat-channel AP-1000D.
What is the operating weight of the BG-260D?
Published figures run roughly 17,850-18,100 kg (39,300-40,000 lb) with a standard screed fitted; some spec sheets list a lower base figure near 14,730 kg (32,470 lb) without a screed attached. Exact weight varies by screed and heat-system configuration.
What replaced the Caterpillar BG-260D?
It followed the earlier Barber-Greene BG-260C. Caterpillar's later wheel-paver line moved to the smaller, C6.6-powered AP600D, while the same-era, C7-powered AP-1000D sold alongside the BG-260D through Cat-branded dealers.
What BG-260D owners discuss
What engine powers the BG-260D, and does it carry over from the older Barber-Greene BG-260C?
The BG-260D runs a Cat C7 ACERT turbocharged inline-six diesel. Full gross rating is 167 kW (224 hp) at 2200 rpm, peak torque about 872 N·m (643 lb-ft), fed by a HEUI (hydraulic electronic unit injector) system rather than mechanical injection. The D designation marks Caterpillar's reworked material handling platform - feeders, conveyors, and controls were redone alongside the engine change from the earlier BG-260C. Confirm the engine arrangement on the dataplate of any individual machine, since ACERT-era emissions calibrations changed more than once across the model's production run.
What are the known weak points on the C7 ACERT in this application?
Injectors and the HEUI injection pump are the parts mechanics flag first. A well-documented failure is the fuel pressure regulator on the back of the cylinder head sticking open on the return side - injection pressure won't build, and the engine loses power or runs rough with no fault code logged. Turbo inlets can also foul and choke performance over time. None of this is specific to the paver; it's the same C7 ACERT behavior reported across Cat truck and machine platforms of the same era. Budget for injector and HEUI pump inspection at major services. Have your dealer pull fuel pressure data if power loss shows up without a code.
Why do these pavers spin their tires pushing trucks or on soft ground, and is that normal?
Yes, and it's a design tradeoff, not a fault. As a wheel (rubber-tire) paver, most of the hopper's load sits over the front bogie wheels, not the rear drive wheels - filling the hopper doesn't add drive traction the way it does on a tracked paver where the load rides over the tracks. Operators report spin on soft subgrade, grades, and when dragging or pushing through stone or loose material. Keep drive tire pressure and tread within spec, and don't force extra head of material against the screed - the gateless feeder system on this generation is built to run full without that.
What causes a torn or dragging mat behind the screed, and how do you troubleshoot it?
A torn, dragging, or shiny mat almost always traces to a cold screed plate - either the crew didn't give it a full warm-up cycle, or one or more heating zones isn't reaching temperature. Check each zone with a multimeter for continuity and correct resistance, inspect harness connectors for heat damage (a hot connector becomes a burnt one over time), and check for tripped breakers. On propane-heated Extend-A-Mat screeds, also check the igniter and gas supply line before condemning an element. Propane fuel systems are safety-critical - have your dealer or a qualified technician verify any repair to the gas train or igniter circuit.
What electrical faults show up most on this generation of Cat paver controls?
Mostly wiring, not sensors. Corrosion, chafed insulation, and loose connector pins account for the bulk of intermittent fault codes - clean and reseat connectors and run a wiggle test on the harness before swapping a sensor. On the grade control side, ultrasonic ski sensors time a sound-wave echo to read surface height, and they're sensitive to ambient temperature swings from wind or radiant heat off fresh mat. Let the system settle and recalibrate rather than chasing a sensor replacement on a symptom that's really a temperature-compensation lag. Have your dealer confirm ECM fault history with the factory diagnostic tool before replacing components.
Anything specific to watch on the hydraulic side?
Standard for Cat machines of this era: a clogged oil cooler core is the most common overheating cause, along with running the tank low and aerating the pump inlet. Keep the cooler blown out and free of mix debris, and don't let fluid level drop below spec. Propel complaints on comparable wheel pavers usually trace to the large hoses between the drive motor and propel pump, or a park brake not fully releasing on one side, before the pump itself is at fault. Because propel and park brake circuits are safety-related, have your dealer verify any repair before returning the machine to service.
What should I check before buying a used BG-260D?
Pull the hour meter and cross-check it against engine and hydraulic service records - a C7 ACERT with well over a thousand hours and no documented injector, HEUI pump, or turbo work is worth a harder look. Run the screed through a full heat cycle (electric or propane, depending on how the unit is equipped) and watch for zones that won't come up to temperature. Check bogie and drive wheel tread and bearing play, since this is a rubber-tire paver with no tracks to inspect - uneven wear usually points to alignment or overload history. Run the auger and conveyor chains under load and listen for slap or gearbox whine. Confirm both operator stations' controls and speed dials match side to side. Have your dealer pull ECM fault history before you commit - a clean-looking machine can still be hiding recurring codes that were cleared, not fixed.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific BG-260D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.