Caterpillarasphalt paver
Caterpillar BG-260C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar BG-260C is a rubber-tired, hydrostatic-propel asphalt paver badge-shared with the Cat AP-1000B on the same chassis, engine, and dual-path propel hardware. Power comes from the Cat 3116TA, a turbocharged and aftercooled 6-cylinder diesel of 6.6L displacement rated 130 kW (174 hp) gross and 118 kW (158 hp) net at 2200 rpm. Operating weight runs 17,330 kg (38,200 lb) with the Pavemaster 10B screed up to 18,940 kg (41,750 lb) with the Extend-A-Mat 10-20B screed, the two factory screed configurations offered on this model. Serial prefixes 8GN and BYG cover its production, roughly the mid-to-late 1990s into the early 2000s based on observed unit model years, placing it as a successor generation within the Barber-Greene wheeled-paver line and a predecessor to the BG-260D, which carried the line forward on a different engine and chassis generation.
Within the C-series run, Caterpillar issued running updates concentrated around the 8GN535-and-up production block, refining propel and screed-heat controls rather than changing the core driveline. Because the BG-260C and AP-1000B share an identical chassis, 3116TA engine, and hydrostatic propel system under two badges, parts and major components interchange between them, which widens the used supply pool for buyers today. In the current used and parts market the BG-260C remains a relevant, affordable wheeled-paver option for contractors who want a proven mechanical-injection diesel and straightforward hydrostatic drivetrain without the cost and complexity of later electronically governed engines, though buyers should budget for age-related wear in wheel bearings, the screed burner, and the analog wiring and sensors typical of this control generation.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar BG-260C specifications
Engine
| Engine model | Cat 3116TA, turbocharged and aftercooled, four-stroke six-cylinder diesel |
| Cylinders | 6 |
| Gross power | 130 kW (174 hp) @ 2200 rpm |
| Net power | 118 kW (158 hp) @ 2200 rpm; 164 Ps per DIN 70020 |
| Displacement | 6.6 L (403 cu in); bore 105 mm (4.12 in), stroke 127 mm (5.0 in) |
| Emissions | Meets EPA and CARB low-emissions engine regulations for its era; no numeric tier published |
Weights
| Operating weight, with Extend-A-Mat 10-20B screed | 18,940 kg (41,750 lb) |
| Operating weight, with Pavemaster 10B screed | 17,330 kg (38,200 lb) |
| Ground pressure | Not published as a figure; front suspension uses tandem bogey axles (two wheels per side) to equalize ground pressure |
| Shipping weight | Not documented separately from operating weight in factory literature |
Dimensions
| Transport length, with truck hitch (Extend-A-Mat screed) | 7264 mm (23 ft 10 in) |
| Transport length, with truck hitch (Pavemaster screed) | 6756 mm (22 ft 2 in) |
| Length with push roller (Extend-A-Mat / Pavemaster) | 6783 mm (22 ft 3 in) / 6285 mm (20 ft 7 in) |
| Operating width | 3327 mm (10 ft 11 in) |
| Overall height | 3378 mm (11 ft 1 in) |
| Transport height (muffler removed) | 2769 mm (9 ft 1 in) |
| Transport width, hoppers raised, with end gates | 3327 mm (10 ft 11 in) |
| Transport width, hoppers raised, without end gates | 3048 mm (10 ft) |
| Wheelbase | 2540 mm (100 in) |
| Front wheel gauge | 2491 mm (98 in) |
| Rear wheel gauge | 2284 mm (90 in) |
| Inside turning radius | 2.9 m (9 ft 6 in) |
| Standard paving width | 3.05 m (10 ft) |
| Maximum paving range, Extend-A-Mat 10-20B screed | 2.44-7.37 m (8 ft to 24 ft 2 in) |
| Maximum paving range, Pavemaster 10B screed | 2.44-9.14 m (8 ft to 30 ft) |
| Hopper capacity | 6.1 cu m (215 cu ft) |
| Truck entry width | 3182 mm (10 ft 5 in) |
Performance
| Paving speed, low range | 0-68.5 m/min (0-224 ft/min) |
| Paving speed, high range | 0-114 m/min (0-374 ft/min) |
| Travel speed, low range | 0-17 km/h (0-10.5 mph) |
| Travel speed, high range | 0-23.5 km/h (0-14.5 mph) |
| Drive system | Closed-loop dual-path hydrostatic propel, two-speed variable displacement motors giving four speed ranges; speeds vary slightly with tire type fitted |
| Gradeability | Not published for this model |
Service capacities (summary)
| Fuel tank | 265 L (70 gal) |
| Hydraulic oil tank | 189 L (50 gal) |
| Cooling system | 37 L (9.78 gal) |
| Engine oil | Not published in factory literature reviewed |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
BG-260C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - 3116TA turbocharged diesel | Not separately published for the paver installation; comparable 3116TA industrial installs run roughly 20-24 L (21-25 US qt) with filter - varies by oil pan/application, confirm exact figure against the OMM refill chart for your serial range | Cat DEO / DEO-ULS diesel engine oil. SAE 15W-40 for general/warm-climate use; step down to SAE 10W-30 for cold-weather starts below freezing, per Cat's multi-viscosity engine oil guidance |
| Cooling system | 37 L (9.8 US gal) | Cat ELC (Extended Life Coolant) preferred, premixed or mixed 50/50 with water; Cat DEAC (Diesel Engine Antifreeze/Coolant) acceptable as a service-fill alternative. Do not mix ELC and DEAC in the same system |
| Fuel tank | 265 L (70.1 US gal) | No. 2-D diesel fuel meeting standard diesel specification; low-sulfur fuel where required by engine emissions configuration |
| Hydraulic system (tank and circuit, incl. closed-loop hydrostatic propel) | 189 L (50 US gal) system total, including tank | Cat TDTO (Transmission and Drive Train Oil), SAE 10W in cold conditions stepping up to SAE 30 or SAE 50 in hot conditions per Cat's multi-viscosity chart; some service literature for this paver family also lists Cat HYDO Advanced as an accepted hydraulic-circuit fill |
| Propel drive / transaxle-differential (wheel drive) | Not separately documented in public sources for this model - the BG-260C uses a closed-loop hydrostatic propel system, so drive-motor fluid is commonly drawn from the main hydraulic reservoir rather than a standalone gearcase; confirm against the OMM whether your serial range has an isolated differential/transaxle sump | Where a separate wheel-drive gearcase exists, Cat TDTO is the standard Cat recommendation for final drives, differentials, and wet-brake components on machines of this generation |
| Grease (chassis, screed, and linkage points) | Spec only - no reservoir capacity applies | Cat multipurpose grease (NLGI 2), e.g. Cat Advanced 3Moly Grease, for pins, bushings, and screed extension/linkage points; reapply per the OMM's scheduled interval |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar BG-260C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the BG-260C beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S oil sampling on the 3116TA at every oil change to catch bearing and liner wear early. Watch for the documented 3116TA soft-block casting issue that has shown up as early as 150-200 hours in some engines; track oil pressure and coolant condition closely through that window on any unit with unknown history. Sample hydrostatic transmission and hydraulic oil on schedule to flag pump and drive-motor wear before seal failure, and monitor coolant condition given the turbocharged, aftercooled cooling load.
Corrective & Common Repairs
Common BG-260C repairs center on the dual-path hydrostatic propel system: tracking-straight complaints usually trace to worn wheel drive motors, uneven tire wear, or control linkage drift rather than the pumps, so check calibration and tires before swapping hydraulic components. Screed burner ignition faults and clogged nozzles are routine on the diesel-fired heat system; clean or replace igniters at the first sign of uneven mat heat. Analog sensor and wiring corrosion is common on this control generation, so check grounds and connectors before condemning a sensor.
Overhaul & Rebuild Points
Major rebuild points are the 3116TA long block, watching for the early-failure soft-block casting risk noted above, plus the hydrostatic propel pumps and wheel drive motors. Because this is a wheeled, not tracked, paver, wheel bearings and hub components carry the wear load that undercarriage rollers would take on a tracked machine, so inspect and rebuild hubs before spindles score. Screed extension and crown mechanisms wear at pivot bushings over high-hour service and are a recurring rebuild item on older units.
Seasonal & Environment Servicing
Cold-weather starts stress the 3116TA turbo and starting aids, so verify block heater and starting-aid function before winter paving season. The diesel-fired screed burner needs clean fuel and clear nozzles for reliable cold-ambient ignition; carry spare igniters during shoulder-season work. Wash cured asphalt off augers, conveyors, and screed plates daily to keep extension slides free. In hot climates, check hydrostatic oil cooler airflow and radiator core cleanliness to prevent overheating under sustained paving load.
BG-260C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 112-6523 | Insert-Fuel Filter | Fuel system service | Check fitment → |
| 1R-0751 | Filter-Fuel | Fuel system service | Check fitment → |
| 119-0073 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 6I-2499 | Filter Element As-Air | Air intake service | Check fitment → |
| 6I-2500 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
BG-260C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-03 / 100-04 | Engine Oil Pressure Sensor circuit reading voltage above (03) or below (04) the normal range | Failed or miswired oil pressure sensor, damaged harness, corroded connector at the sensor | Check sensor wiring and connector for damage or corrosion, verify supply voltage at sensor, replace sensor if circuit tests bad |
| 110-03 / 110-04 | Engine Coolant Temperature Sensor circuit voltage above or below normal range | Faulty coolant temp sensor, chafed or corroded wiring, poor ground | Inspect sensor connector and harness, test sensor resistance against spec, replace sensor if out of range |
| 110-00 | Coolant temperature reading valid but above the normal operating range (overheat condition) | Low coolant level, blocked radiator/screen, slipping or failed fan drive, faulty thermostat | Shut down and let engine cool, check coolant level and radiator core/screen for debris, verify fan operation before restarting |
| 111-* | Engine Coolant Level Sensor circuit fault (low-coolant sensor, on units so equipped) | Low coolant level, failed level sensor/probe, damaged wiring in the sensor circuit | Check actual coolant level first, inspect sensor and connector, replace sensor if level is correct but code persists |
| 168-02 | Electrical System Voltage — intermittent or erratic battery power supply to the engine ECM | Loose or corroded battery cable, bad ground strap, worn ignition/keyswitch contacts, chafed ECM power wiring | Clean and tighten battery terminals and ground straps, check keyswitch and ECM power circuit for voltage drop, repair or replace faulty wiring |
| 91-* | Throttle Position Sensor circuit fault | Sensor out of adjustment or failed, damaged harness between sensor and ECM, corroded connector | Check throttle linkage and sensor mounting, verify sensor signal with a diagnostic tool, replace sensor if out of calibration |
| 190-* | Engine Speed/Timing Sensor circuit fault | Damaged or misadjusted speed/timing sensor air gap, debris on sensor tip, broken wiring | Inspect sensor gap and mounting, clean debris from sensor tip, check wiring continuity, replace sensor if faulty |
| 253-* | Personality Module fault — ECM programmed parameters missing, corrupted, or not matched to the engine | ECM reflashed or swapped without reprogramming, corrupted ECM memory, incorrect parts/service programming after a repair | Connect Caterpillar Electronic Technician (ET) to verify and reprogram the personality module/parameters, replace ECM if memory is confirmed faulty |
| 41-* | 8 Volt DC Supply fault — the ECM's regulated sensor supply voltage is out of range | Shorted or overloaded sensor circuit pulling down the supply, damaged ECM supply wiring | Disconnect sensors one at a time to isolate the shorted circuit, check supply wiring for chafing or shorts, repair before reconnecting sensors |
| 102-* | Boost Pressure Sensor circuit fault (turbocharger inlet manifold pressure sensor) | Failed boost sensor, plugged or damaged sense line, corroded connector | Check the pressure sense line for cracks/blockage, inspect sensor wiring, replace sensor if signal is out of range |
| 1-05 (example, cylinder-specific 1 through 6) | Cylinder injector solenoid circuit fault — open circuit on the numbered cylinder's injector driver | Broken or corroded injector wiring, failed injector solenoid, loose injector harness connector under the valve cover | Check injector harness and connector for that cylinder, test solenoid resistance, replace injector or repair wiring as needed |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
BG-260C attachments & work tools
Screed family
BG-260C pairs with the Extend-A-Mat B or Pavemaster B variable-width, power-extending screed. Both use a heavy-duty bolt-on frame and offer tamper-bar or vibratory compaction plates for precompaction under the screed.
Paving width range
Base screed works from about 2.44 m (8 ft). Hydraulic power extension plus bolt-ons reaches roughly 7.37 m (24 ft 2 in) on the Extend-A-Mat B or up to about 9.14 m (30 ft) on the Pavemaster B, varies by configuration.
Bolt-on screed extensions
Heavy-duty screed frame accepts bolt-on extensions beyond the hydraulic power-extending range for extra-wide mats. Extension tubes support each add-on section, and extensions can include their own heat and vibration.
End gate configuration
Screed end gates are fixed as standard or hinge-mounted as an option, letting the gate turn semi-automatically to shape the mat edge without manual removal.
Screed heat system
This screed generation uses a diesel-fired burner heat system to bring the plates up to paving temperature before startup, rather than the integrated electric heat later offered on newer Cat screed lines.
Material feed system
Dual auger feed (about 406 mm / 16 in diameter) works with independently controlled, slower-running feeder conveyors and tunnel construction ahead of the screed to cut segregation and wear. This is a factory feed configuration, not a bolt-on tool, but governs how feed rate is tuned to screed width.
Engine and cold-weather aid
Powered by the Cat 3116TA turbocharged 6-cylinder diesel, about 130 kW (174 hp) at 2200 rpm. An intake manifold heater preheats incoming air for cold-weather starting; this is a standard feature rather than a selectable attachment.
Tire/undercarriage options
As a rubber-tire wheel paver, the BG-260C runs on solid rubber or sand-rib pneumatic tires depending on jobsite and traction needs, a factory configuration choice rather than an add-on tool.
Screed mounting
No quick-attach coupler is used between tractor and screed. The screed mounts on pivoting tow-point arms with hydraulic tow-point height and screed lift/lower control, standard architecture for this class of paver.
All BG-260C assemblies by section
Every catalogued assembly group for the Caterpillar BG-260C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
136-0596 Aftercooler Gp-Water
| 03***83 | Nipple-Front Axle Suction Port | 1 |
| 10***46 | Hose | 1 |
| 13***96 | Aftercooler Group-Water | 1 |
9y-6984 Aftercooler Gp-Water
| 03***83 | Nipple-Front Axle Suction Port | 2 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
172-0993 Air Cleaner Gp
| 06***70 | Cap | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
6i-2551 Air Cleaner Gp
| 6I***99 | Filter Element As-Air; (Primary) | 1 |
| 6I***00 | Filter Element As-Air; (Secondary) | 1 |
| 6I***51 | Air Cleaner Group | 1 |
142-0332 Air Cleaner Gp
| 14***32 | Air Cleaner Group | 1 |
| 17***93 | Tube As | 1 |
| 17***97 | Brace | 1 |
142-0333 Exhaust Gp
| 10***70 | Elbow-Exhaust | 1 |
| 10***25 | Coupling-Exhaust | 1 |
| 11***89 | Muffler | 1 |
9y-4968 Lines Gp-Air
| 7C***55 | Hose | 1 |
| 8T***03 | Clamp; (Hose) | 2 |
| 9Y***68 | Lines Group-Air | 1 |
7w-9248 Manifold Gp-Exhaust
| 10***38 | Manifold-Exhaust | 1 |
| 11***00 | Gasket-Manifold | 3 |
| 14***48 | Bolt; (M10x1.5x65-mm)(M10x1.50x65mm) | 12 |
4w-3480 Manifold Gp-Inlet
| 11***50 | Gasket | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 3 |
| 4W***80 | Manifold Group-Inlet; Inlet Manifold Group | 1 |
121-7746 Precleaner Gp
| 12***46 | Precleaner Group | 1 |
| 13***43 | Clamp-Hose | 1 |
| 1M***50 | Bowl | 1 |
119-3084 Turbocharger Gp
| 11***84 | Turbocharger Group | 1 |
| 12***40 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
124-9340 Turbocharger Gp
| 10***77 | Housing | 1 |
| 11***58 | Cartridge Group-Turbocharger | 1 |
| 12***54 | Seal-O-Ring | 1 |
Basic Engine
108-5759 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 10***59 | Camshaft Group; (Single) | 1 |
| 13***76 | Camshaft Assem. | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
103-0863 Cover Gp-Cylinder Block
| 10***63 | Cover Group-Cylinder Block | 1 |
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 13***40 | Spacer; (9x15x15-mm Thk) | 1 |
7l-0004 Cover Gp-Front Housing
| 10***20 | Cover As-Front | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
4w-2172 Cover Gp-Valve Mechanism
| 11***40 | Gasket; (Valve Cover) | 1 |
| 11***60 | Cover | 1 |
| 4W***72 | Cover Group-Valve Mechanism; Valve Mechanism Cover Group | 1 |
4w-2197 Crankshaft Gp
| 10***30 | Bearing-Main; (Standard) | 3 |
| 10***25 | Crankshaft Assem. | 1 |
| 10***02 | Bearing-Thrust; (Standard) | 1 |
149-5403 Cylinder Block Gp
| 14***02 | Pin, Cylinder Block As | 1 |
| 14***03 | Cylinder Block Group | 1 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
7e-2482 Cylinder Block Gp
| 14***03 | Cylinder Block Group | 1 |
| 1W***07 | Sleeve | 2 |
| 4P***51 | Tube As-Piston Cooling | 6 |
129-1095 Cylinder Block Gp
| 12***95 | Cylinder Block Group | 1 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
140-7373 Cylinder Head As
| 11***36 | Seal-Valve Stem | 12 |
| 14***73 | Cylinder Head As | 1 |
| 19***66 | Cylinder Head As | 1 |
190-9066 Cylinder Head As
| 11***61 | Sleeve | 6 |
| 16***63 | Insert-Valve Seat; (Inlet) | 6 |
| 19***66 | Cylinder Head As | 1 |
115-4107 Cylinder Head As
| 10***10 | Cylinder Head | 1 |
| 11***07 | Cylinder Head As | 1 |
| 11***61 | Sleeve | 6 |
160-5130 Cylinder Head Gp
| 14***71 | Cylinder Head Group | 1 |
| 16***30 | Cylinder Head Group | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 3 |
159-0305 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
| 14***71 | Cylinder Head Group | 1 |
9y-8871 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 11***65 | Cylinder Head Group | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
140-7371 Cylinder Head Gp
| 11***36 | Seal-Valve Stem | 12 |
| 13***19 | Valve-Exhaust | 6 |
| 14***71 | Cylinder Head Group | 1 |
115-4165 Cylinder Head Gp
| 11***07 | Cylinder Head As | 1 |
| 11***65 | Cylinder Head Group | 1 |
| 11***36 | Seal-Valve Stem | 12 |
4p-2844 Damper & Pulley Gp
| 20***88 | Damper Assem. | 1 |
| 4P***43 | Pulley | 1 |
| 4P***44 | Damper & Pulley Group | 1 |
9y-9177 Damper & Pulley Gp
| 20***88 | Damper Assem. | 1 |
| 6V***30 | Bolt; (M10x1.5x60-mm) | 8 |
| 9Y***76 | Pulley-Crankshaft | 1 |
136-8877 Drain Gp-Engine Oil
| 13***77 | Drain Group-Engine Oil | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
7c-4566 Drain Gp-Engine Oil
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 7C***66 | Drain Group-Oil Pan; -Magnetic Plug | 1 |
108-5434 Drive Gp-Accessory
| 10***60 | Adapter-Pump | 1 |
| 10***34 | Drive Group-Accessory | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
7c-0044 Drive Gp-Fan
| 4W***03 | Cup-Roller Bearing | 2 |
| 4W***04 | Cone-Roller Bearing | 2 |
| 4W***42 | Spacer; (35.3x45.5x38.331-mm Thk) | 1 |
121-7251 Drive Gp-Pump
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 11***13 | Drive Group-Pump | 1 |
| 12***51 | Drive Group-Pump | 1 |
118-3613 Drive Gp-Pump
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 07***82 | Seal | 1 |
| 07***06 | Coupling | 2 |
187-8714 Drive Gp-Pump
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 07***06 | Coupling | 2 |
| 07***13 | Sleeve | 1 |
7c-6998 Drive Gp-Water Pump
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
| 11***38 | Pulley As-Idler | 1 |
4w-5428 Drive Gp-Water Pump
| 03***75 | V-Belt; (Pump Drive)(Water) | 1 |
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
9y-2755 Flywheel Gp
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
101-4540 Gear Gp-Front
| 10***07 | Shaft-Cam Idler | 1 |
| 10***08 | Plate-Retaining | 1 |
| 10***40 | Gear Group-Front | 1 |
9y-4856 Housing Gp-Flywheel
| 1B***70 | Plug-Pipe; (Drain) | 1 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 1 |
| 2P***94 | Plug-Sealing | 1 |
101-4539 Housing Gp-Front
| 10***39 | Housing Group-Front | 1 |
| 10***11 | Plug | 2 |
| 13***42 | Housing-Front | 1 |
4w-2515 Lifting Gp-Engine
| 4W***82 | Plate-Lifting; (Rear)(Rear) | 1 |
| 4W***83 | Plate-Lifting; (Front) | 1 |
| 4W***15 | Lifting Group | 1 |
119-5977 Mounting Gp-Engine Flexible
| 10***20 | Mount As | 1 |
| 11***62 | Mount As | 1 |
| 11***77 | Mounting Group-Engine Flexible | 1 |
4w-0269 Pan Gp-Oil -Engine
| 11***77 | Pan-Oil | 1 |
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 26***16 | Gasket-Oil Pan; (Engine) | 1 |
107-7639 Piston & Rod Gp
| 10***45 | Crown As-Piston | 1 |
| 10***39 | Piston & Rod Group; Connecting Rod And Piston Group | 1 |
| 10***87 | Ring-Piston (Top-Chrome) | 1 |
4w-5429 Pulley Gp-Crankshaft
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
| 4W***29 | Pulley Group-Crankshaft; Crankshaft Pulley Group | 1 |
| 7W***73 | Pulley-Crankshaft; (1-Groove) | 1 |
9y-0757 Pulley Gp-Fan Drive
| 7C***90 | Pulley-Fan Drive | 1 |
| 8T***08 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 6 |
| 9Y***57 | Pulley Group-Fan Drive | 1 |
107-7722 Rocker Arm Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 10***91 | Seat-Wear | 1 |
| 10***76 | Rocker Arm As; (Unit Injector) | 1 |
115-4203 Seal Gp-Crankshaft
| 11***03 | Seal Group-Crankshaft | 1 |
| 22***09 | Seal Group-Crankshaft; (Rear) | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
4p-4372 Mechanism Gp-Fuel Pump & Valve
| 10***22 | Rocker Arm Group-Valve | 6 |
| 14***47 | Arm As-Lifter | 4 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 2 |
Controls
165-4719 Control Gp-Thickness -Standard Ccw
| 13***20 | Rod-Threaded | 2 |
| 13***23 | Sleeve As-Adjustment | 2 |
| 16***19 | Control Group-Thickness; -Standard Ccw | 1 |
165-4718 Control Gp-Thickness -Standard Cw
| 13***07 | Rod | 2 |
| 13***08 | Sleeve As-Adjustment | 2 |
| 16***18 | Control Group-Thickness; -Standard Cw | 1 |
185-4044 Jack Gp-Height Adjuster
| 18***65 | Jack Group-Height Adjuster | 1 |
| 18***44 | Jack Group-Height Adjuster | 1 |
| 1F***50 | Nut Rops Support | 1 |
196-2503 Jack Gp-Height Adjuster
| 10***64 | Bearing-Thrust | 2 |
| 11***49 | Worm | 1 |
| 19***03 | Jack Group-Height Adjuster | 1 |
Cooling System
7c-5467 Adapter Gp-Fan
| 6I***37 | Adapter; (Fan) | 1 |
| 7C***67 | Adapter Group-Fan | 1 |
| 8T***77 | Bolt-Plt; (M8 X 1.25 X 90) | 6 |
100-6269 Cooler Gp-Engine Oil
| 10***69 | Cooler Group-Engine Oil | 1 |
| 23***55 | Gasket | 1 |
| 26***43 | Core As-Engine Oil Cooler | 1 |
121-2749 Cooling Gp-Supplemental
| 10***76 | Hose-Upper; (Radiator)(Radiator) | 1 |
| 11***28 | Hose-Lower; (Radiator)(Radiator) | 1 |
| 12***42 | Mount As | 1 |
145-5224 Kit-High Ambient Temp Cooling
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 13***69 | Mounting Group-Hydraulic Oil Cooler | 2 |
7c-9048 Lines Gp-Water
| 12***47 | Housing-Water Regulating | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 12***71 | Clamp-Hose | 2 |
4w-7589 Pump Gp-Water
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
| 4J***24 | Seal 46.99 mm(1.85 In.) I.D. | 1 |
| 4W***89 | Pump Group-Water | 1 |
7c-4508 Pump Gp-Water
| 15***37 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
7c-6438 Pump Gp-Water
| 15***42 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
159-3137 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 15***37 | Pump Group-Water | 1 |
159-3142 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 15***42 | Pump Group-Water | 1 |
7c-7030 Pump Gp-Water
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
| 4J***24 | Seal 46.99 mm(1.85 In.) I.D. | 1 |
| 7C***38 | Pump Group-Water | 1 |
171-9705 Radiator Gp
| 03***64 | Cap As-Radiator; (7-Psi) | 1 |
| 17***05 | Radiator Group | 1 |
| 18***36 | Shroud | 1 |
Electrical And Starting System
9w-3043 Alternator Gp-Charging
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 5 |
| 10***63 | Regulator As-Alternator; (24-Volt) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
9y-8187 Alternator Gp-Charging
| 4N***05 | Spacer; (0.42x0.75x0.6-In Thk) | 1 |
| 7C***63 | Bracket-Alternator | 1 |
| 7C***29 | Pulley-Alternator | 1 |
115-8331 Battery Gp
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 10***58 | Bracket As-Battery | 1 |
| 11***37 | Cable As | 1 |
154-9599 Box Gp-Junction
| 03***38 | Screw; (6-32x1.0in) | 4 |
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 6 |
131-5427 Box Gp-Junction
| 03***38 | Screw; (6-32x1.0in) | 4 |
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 6 |
175-7736 Box Gp-Junction
| 17***82 | Film-Warning; (High Voltage) | 1 |
| 17***83 | Film-Identification; (Electrical Outlet) | 1 |
| 17***36 | Box Group-Junction | 1 |
175-7737 Box Gp-Junction
| 17***82 | Film-Warning; (High Voltage) | 1 |
| 17***83 | Film-Identification; (Electrical Outlet) | 1 |
| 17***37 | Box Group-Junction | 1 |
122-9309 Buffer Gp-Sensor -5000-Hz Pwm
| 12***09 | Buffer Group-Sensor; -5000-Hz Pwm-Conveyor Speed | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
122-9303 Buffer Gp-Sensor -Material Height
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
131-5426 Circuit Breaker & Relay Gp
| 01***80 | Lockwasher | 2 |
| 0S***70 | Cap Screw (5/8" Long) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
154-9616 Circuit Breaker & Relay Gp
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
123-6802 Control Gp-Manual Override
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***13 | Switch As-Toggle; (Propel Override) | 1 |
| 11***91 | Resistor As | 1 |
172-6732 Control Gp-Manual Override
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***13 | Switch As-Toggle; (Propel Override) | 1 |
| 11***68 | Wire As | 1 |
164-7359 Cover Gp-Wiring Harness
| 16***59 | Cover Group-Wiring Harness | 1 |
| 17***96 | Bracket-Mounting | 1 |
| 17***97 | Flange | 1 |
155-2651 Distributor Gp-Electronic
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***51 | Distributor Group-Electronic | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
115-8322 Electrical Ar
| 10***54 | Horn & Alarm Group | 1 |
| 11***22 | Electrical Ar | 1 |
| 11***30 | Installation Group-Controls | 1 |
194-7095 Generator Gp-Hydraulic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 10***34 | Drive Group-Accessory | 1 |
219-6313 Generator Gp-Hydraulic -8 Kilowatt
| 17***44 | Fan | 1 |
| 17***45 | Support | 2 |
| 17***46 | Brush | 6 |
166-4141 Generator Gp-Hydraulic -6 Kilowatt
| 16***41 | Generator Group-Hydraulic; -6 Kilowatt | 1 |
| 17***42 | Ring-Slip | 1 |
| 17***43 | Rotor | 1 |
160-4233 Generator Gp-Hydraulic -8 Kilowatt
| 16***33 | Generator Group-Hydraulic; -8 Kilowatt | 1 |
| 17***42 | Ring-Slip | 1 |
| 17***44 | Fan | 1 |
194-7094 Generator Gp-Hydraulic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 10***34 | Drive Group-Accessory | 1 |
219-6308 Generator Gp-Hydraulic -6 Kilowatt
| 17***44 | Fan | 1 |
| 17***45 | Support | 2 |
| 17***46 | Brush | 6 |
194-6509 Harness As-Sensor -Engine Oil
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***09 | Harness As-Sensor; -Engine Oil | 1 |
158-8051 Harness As-Valve -Tow Point
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 15***51 | Harness As-Valve; -Tow Point | 1 |
115-8330 Installation Gp-Controls
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
230-5405 Installation Gp-Controls
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
116-8711 Lamp Gp-Warning Beacon
| 03***14 | Screw; (10-32x1-In) | 3 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 11***11 | Lamp Group-Warning Beacon | 1 |
128-6983 Lamp Gp-Warning Beacon -Rotating
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***83 | Lamp Group-Warning Beacon; -Rotating, Amber | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
116-8703 Lighting Gp-Flood
| 10***99 | Harness As-Lighting; (Floodlights)(Rear) | 4 |
| 10***29 | Plate | 2 |
| 11***03 | Lighting Group-Flood | 1 |
106-6610 Motor Gp-Electric
| 09***47 | Brush As | 1 |
| 10***10 | Motor Group-Electric | 1 |
| 11***94 | Bell; (Rear) | 1 |
170-7071 Motor Gp-Electric
| 09***47 | Brush As | 1 |
| 11***94 | Bell; (Rear) | 1 |
| 11***61 | Bearing | 2 |
145-8519 Sensor Gp-Auger
| 11***24 | Clamp | 2 |
| 14***19 | Sensor Group-Auger | 1 |
| 16***41 | Support-Sensor | 2 |
118-3465 Sensor Gp-Feeder
| 11***22 | Block As-Mounting | 2 |
| 11***07 | Knob | 2 |
| 11***65 | Sensor Group-Feeder | 1 |
168-7855 Sensor Gp-Feeder
| 11***07 | Knob | 2 |
| 12***44 | Paddle As | 2 |
| 16***91 | Block As-Mounting; (Position Sensor) | 2 |
219-2385 Sensor Gp-Position
| 12***50 | Receptacle As | 1 |
| 12***51 | Bushing | 1 |
| 12***52 | Clamp As-Cable | 1 |
105-3769 Sensor Gp-Position -Articulation Angle
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***69 | Sensor Group-Position; -Articulation Angle-Transmission Shift Lever | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
147-1680 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***80 | Sensor Group-Position; -Direction, Speed-Steering Pedal, Rh, Lh-Center Pedal | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
121-7386 Sensor Gp-Position
| 12***86 | Sensor Group-Position | 1 |
| 12***50 | Receptacle As | 0 |
| 12***52 | Clamp As-Cable | 0 |
284-8876 Sensor Gp-Position
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 28***76 | Sensor Group-Position | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
161-8925 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***25 | Sensor Group-Position; -Articulation Angle | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
214-4863 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
| 21***63 | Sensor Group-Position; -Rotary-Tc Impeller Clutch, Lh Pedal | 1 |
219-2386 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***32 | Sensor As-Position; (Articulation Angle) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
168-3551 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***51 | Sensor Group-Position; -Steering | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
9x-5592 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 9X***92 | Sensor Group-Position; -Direction, Speed-Steering Pedal, Rh, Lh-Center Pedal | 1 |
118-6240 Sensor Gp-Speed -Propel
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***40 | Sensor Group-Speed; -Propel | 1 |
| 16***09 | Nut-Special | 1 |
7c-9458 Solenoid Gp-Shutoff
| 12***72 | Solenoid As; (Fuel Shutoff) | 1 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 1 |
| 6V***77 | Nut (8-32 Thd) | 2 |
106-9086 Starting Aid Gp
| 10***86 | Starting Aid Group; (Heater) | 1 |
| 10***52 | Heater As; (22-Volt, 2160-Watt)(Air Inlet) | 1 |
| 10***46 | Hose | 1 |
134-2356 Starting Aid Gp -Air Inlet Heater
| 10***52 | Heater As; (22-Volt, 2160-Watt)(Air Inlet) | 1 |
| 10***47 | Strap-Grounding | 1 |
| 12***79 | Stud-Taperlock; (M8x1.25x130-mm) | 1 |
6v-5720 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
106-8557 Starting Motor Gp-Electric
| 10***57 | Starting Motor Group-Electric; Electric Starting Motor Group (Robert Bosch) | 1 |
| 7X***62 | Washer-Hard; (13.5x19x0.8-mm Thk) | 3 |
| 8F***34 | Lockwasher; (External Teeth) | 1 |
207-1517 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
108-3858 Starting Motor Gp-Electric
| 10***40 | Starting Motor Group-Electric | 1 |
| 10***58 | Starting Motor Group-Electric | 1 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
104-7040 Starting Motor Gp-Electric
| 10***40 | Starting Motor Group-Electric | 1 |
| 10***57 | Starting Motor Group-Electric; Electric Starting Motor Group (Robert Bosch) | 1 |
| 6V***20 | Starting Motor Group-Electric; (Electric) | 1 |
106-8559 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
207-1511 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
106-8558 Starting Motor Gp-Electric
| 10***58 | Starting Motor Group-Electric | 1 |
| 10***59 | Starting Motor Group-Electric; Electric Starting Motor Group (Delco Remy) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
172-8660 Switch Gp-Liquid Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
148-3040 Wiring Gp-Engine
| 11***18 | Clip | 2 |
| 11***66 | Mount | 1 |
| 14***40 | Wiring Group-Engine | 1 |
187-6531 Wiring Gp-Engine
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
115-8332 Wiring Gp-Hydraulic Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***51 | Plug | 1 |
| 10***54 | Plug | 1 |
239-5250 Wiring Gp-Power Train
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***13 | Switch As-Toggle; (Propel Override) | 1 |
| 11***68 | Wire As | 1 |
197-9828 Wiring Gp-Screed
| 19***98 | Panel Group-Electronic; -Material Height-Rh | 1 |
| 19***99 | Panel Group-Electronic; -Material Height-Lh | 1 |
| 19***28 | Wiring Group-Screed | 1 |
Electrical System
196-1299 Panel Gp-Electronic -Material Height-Lh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 13***48 | Potentiometer As; (Rh Conveyor Speed Dial) | 1 |
196-1298 Panel Gp-Electronic -Material Height-Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***83 | Relay-Time Delay; (Electric Heat) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
Engine Arrangement
142-0331 Engine Ar -General
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***08 | Valve Group-Fluid Sampling; -Coolant | 1 |
115-8327 Engine Ar
| 11***27 | Engine Ar | 1 |
| 11***77 | Mounting Group-Engine Flexible | 1 |
| 12***49 | Cooling Group-Supplemental | 1 |
133-4245 Engine Ar
| 10***69 | Cooler Group-Engine Oil | 1 |
| 10***39 | Housing Group-Front | 1 |
| 10***40 | Gear Group-Front | 1 |
159-5999 Engine Ar
| 10***69 | Cooler Group-Engine Oil | 1 |
| 10***39 | Housing Group-Front | 1 |
| 10***40 | Gear Group-Front | 1 |
Feeder Drag And Auger Conveyors
106-9717 Bearing Gp-Auger
| 10***17 | Bearing Group-Auger | 1 |
| 11***94 | Bearing-Insert | 1 |
| 19***77 | Shield | 1 |
106-9718 Bearing Gp-Auger
| 01***41 | Setscrew-Socket | 3 |
| 10***18 | Bearing Group-Auger | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
116-9509 Bearing Gp-Auger
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***09 | Bearing Group-Auger | 1 |
201-5584 Bearing Gp-Auger
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
| 20***84 | Bearing Group-Auger | 1 |
119-6653 Chain Gp-Conveyor -Rh
| 11***53 | Chain Group-Conveyor; -Rh | 1 |
| 8I***14 | Bar-Side | 61 |
| 8I***15 | Bar-Side | 31 |
134-6432 Chain Gp-Conveyor -Lh
| 13***32 | Chain Group-Conveyor; -Lh | 1 |
| 8I***14 | Bar-Side | 61 |
| 8I***15 | Bar-Side | 31 |
119-6652 Chain Gp-Conveyor
| 11***52 | Chain Group-Conveyor | 1 |
| 11***53 | Chain Group-Conveyor; -Rh | 1 |
| 13***32 | Chain Group-Conveyor; -Lh | 1 |
115-8326 Conveyor Ar-Drag & Auger
| 10***77 | Footshaft Group | 2 |
| 11***26 | Conveyor Ar-Drag & Auger | 1 |
| 11***44 | Shaft Group-Feeder Drive | 2 |
144-5418 Conveyor Gp-Auger
| 06***66 | Bolt; (3/4-10x1.642-In) | 12 |
| 07***87 | Ring-Retaining | 4 |
| 10***53 | Bar | 2 |
230-1538 Conveyor Gp-Auger
| 06***66 | Bolt; (3/4-10x1.642-In) | 6 |
| 10***55 | Plate | 1 |
| 10***57 | Slide As | 1 |
115-8346 Conveyor Gp-Drag
| 05***20 | Pin-Spring | 60 |
| 11***46 | Conveyor Group-Drag | 1 |
| 11***52 | Chain Group-Conveyor | 1 |
185-0787 Drive Gp-Conveyor -Auger Conveyor
| 08***41 | Carrier As | 1 |
| 08***44 | Gear-Input | 1 |
| 08***83 | Washer; (Thrust) | 1 |
8i-0866 Drive Gp-Conveyor
| 08***44 | Gear-Input | 1 |
| 08***83 | Washer; (Thrust) | 1 |
| 09***78 | Pin-Spring | 3 |
8i-0852 Drive Gp-Conveyor -Drag Conveyor
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 08***43 | Gear-Cluster | 3 |
5e-9809 Extension Gp-Auger -1-Ft, Rh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 5E***09 | Extension Group-Auger; -1-Ft, Rh | 1 |
5e-9808 Extension Gp-Auger -1-Ft, Lh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 5E***08 | Extension Group-Auger; -1-Ft, Lh | 1 |
1g-9347 Extension Gp-Auger -6 In
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 1G***48 | Tube | 2 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 2 |
5e-9826 Extension Gp-Auger -2-Ft, Rh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 5E***26 | Extension Group-Auger; -2-Ft, Rh | 1 |
5e-9825 Extension Gp-Auger -2-Ft, Lh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 5E***25 | Extension Group-Auger; -2-Ft, Lh | 1 |
104-7477 Footshaft Gp
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
115-8347 Guard Gp-Feeder
| 03***82 | Screw; (3/8-16x2-In) | 12 |
| 10***41 | Plate | 2 |
| 11***47 | Guard Group-Feeder | 1 |
115-8336 Lines Gp-Lubrication
| 10***01 | Tube As | 1 |
| 11***36 | Lines Group-Lubrication | 1 |
| 12***88 | Tube As | 2 |
115-8344 Shaft Gp-Feeder Drive
| 03***21 | Bolt-Allen Hd; (3/8unc X 1) | 4 |
| 10***30 | Bearing-Flange | 1 |
| 10***70 | Key-Square | 1 |
227-8946 Shaft Gp-Feeder Drive
| 03***21 | Bolt-Allen Hd; (3/8unc X 1) | 4 |
| 10***30 | Bearing-Flange | 1 |
| 10***70 | Key-Square | 1 |
Frame And Body
115-8343 Arm Gp-Tow
| 03***53 | Ring-Retaining | 2 |
| 05***74 | Pin | 2 |
| 10***64 | Plate | 4 |
122-5897 Brace Gp
| 10***81 | Tube As; -Ski Tow | 1 |
| 10***89 | Brace Group | 1 |
| 12***97 | Brace Group | 1 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
109-2722 Bracket Gp-Support
| 06***66 | Bolt; (3/4-10x1.642-In) | 2 |
| 10***22 | Bracket Group-Support | 1 |
| 11***52 | Plate | 1 |
142-0335 Cover Gp-Engine & Platform
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 8 |
| 03***72 | Bolt; (3/8-16-Thd) | 11 |
| 10***03 | Panel; (N.S.) | 2 |
171-5926 Cover Gp-Engine & Platform
| 17***45 | Panel | 1 |
| 17***47 | Cover As-Louver | 1 |
| 17***26 | Cover Group-Engine & Platform | 1 |
147-8340 Cover Gp-Paver Ventilation -Without Generator
| 11***62 | Washer | 4 |
| 14***47 | Plate-Cover | 1 |
| 14***40 | Cover Group-Paver Ventilation; -Without Generator | 1 |
195-5931 Cover Gp-Platform -Without Generator
| 10***56 | Rod; (Prop) | 1 |
| 14***41 | Shim; (6-mm Thk)(6 mm Thk) | 1 |
| 14***57 | Shim; (2-mm Thk)(2 mm Thk) | 1 |
106-9715 Extension Gp-Main Frame -2 Ft
| 10***15 | Extension Group-Main Frame; -2 Ft | 1 |
| 10***90 | Extension As | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 3 |
106-9714 Extension Gp-Main Frame -1 Ft
| 10***14 | Extension Group-Main Frame; -1 Ft | 1 |
| 10***88 | Extension As | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 3 |
215-7553 Extension Gp-Main Frame
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
116-9510 Extension Gp-Main Frame
| 11***10 | Extension Group-Main Frame | 1 |
| 12***73 | Extension As | 2 |
| 12***78 | Bar | 2 |
222-1210 Frame As
| 11***52 | Frame As | 1 |
| 16***86 | Tube | 4 |
| 16***87 | Tube | 6 |
115-8341 Frame Gp-Main
| 11***41 | Frame Group-Main | 1 |
| 14***34 | Angle | 2 |
| 1A***23 | Dowel (1" Long) | 4 |
168-0232 Guard Gp-Deflector
| 16***99 | Guard; (Lh) | 1 |
| 16***00 | Guard; (Rh) | 1 |
| 16***09 | Deflector | 1 |
104-6579 Guide Gp-Steering
| 03***74 | Keeper | 1 |
| 10***79 | Guide Group-Steering | 1 |
| 10***39 | Tube As | 1 |
135-0494 Hopper Gp
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 4 |
| 10***49 | Pin As | 2 |
| 10***20 | Bar | 1 |
169-9539 Hopper Gp
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 10***15 | Apron As | 2 |
173-7690 Kit-Hopper
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 16***85 | Pin As | 2 |
| 16***86 | Tube | 8 |
173-2661 Plate Gp
| 17***61 | Plate Group | 1 |
118-7295 Step Gp
| 11***15 | Step As | 1 |
| 11***34 | Bracket As; (Rh) | 1 |
| 11***03 | Bracket As; (Lh) | 1 |
115-8324 Structural Ar
| 10***79 | Guide Group-Steering | 1 |
| 10***68 | Support Group-Tow Arm | 1 |
| 10***70 | Platform Group | 1 |
169-5471 Support Gp-Frame
| 10***89 | Brace Group | 1 |
| 10***22 | Bracket Group-Support | 1 |
| 16***71 | Support Group-Frame | 1 |
104-7468 Support Gp-Tow Arm
| 06***35 | Lock Pin | 2 |
| 10***68 | Support Group-Tow Arm | 1 |
| 10***37 | Lever As | 1 |
142-0336 Suppression Gp-Sound
| 10***64 | Foam | 2 |
| 10***65 | Foam | 2 |
| 10***66 | Foam | 4 |
106-9681 Tube As -Ski Tow
| 10***81 | Tube As; -Ski Tow | 1 |
147-6981 Ventilation Gp-Paver -Without Generator
| 11***62 | Washer | 5 |
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
150-0033 Ventilation Gp-Paver
| 14***81 | Ventilation Group-Paver; -Without Generator | 1 |
| 14***38 | Lines Group-Paver Ventilation | 1 |
| 15***33 | Ventilation Group-Paver | 1 |
Fuel System
129-1102 Base Gp-Fuel Filter
| 11***23 | Insert-Fuel Filter | 1 |
| 12***01 | Valve Group-Check; -Fuel-Fuel Filter | 1 |
| 12***02 | Base Group-Fuel Filter | 1 |
164-4858 Cap Gp-Fuel Filler -Extreme Service, Lockable
| 16***58 | Cap Group-Fuel Filler; -Extreme Service, Lockable | 1 |
| 19***75 | Cover As-Filter; (Fuel Cap) | 1 |
| 9X***00 | Seal-O-Ring | 1 |
105-1695 Control Gp-Fuel Injection
| 10***95 | Control Group-Fuel Injection | 1 |
| 16***56 | Control Group-Fuel Injection | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 4 |
7e-9429 Control Gp-Governor
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 1 |
| 6I***82 | Lever As | 1 |
| 6I***83 | Spring | 2 |
7e-8794 Drive Gp-Gov & Transfer Pump
| 10***68 | Gear As-Drive; (44-Teeth), . Body | 1 |
| 10***85 | Lever-Shutoff; (Output) | 1 |
| 1W***65 | Ring-Retaining | 1 |
7w-4812 Fastener Gp-Fuel Inj Pump
| 1T***68 | Seal-O-Ring; (Fuel Injection Pump) | 1 |
| 6F***73 | Seal--To Top Cover On Selector Valve | 1 |
| 6V***18 | Bolt (M8x1.25x45mm); (M8x1.25x35-mm) | 3 |
6i-2693 Filter Gp-Fuel
| 1R***51 | Filter-Fuel; (Advanced Efficiency)(High Efficiency) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6I***93 | Filter Group-Fuel; Fuel Filter Group (2z F3772-Up) | 1 |
9y-0283 Fitting Gp-Fuel Lines
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
| 5P***24 | Elbow-90 Degree | 2 |
| 9Y***83 | Fitting Group-Fuel Lines | 1 |
129-1213 Governor Gp-Unit Injector
| 12***13 | Governor Group-Unit Injector | 1 |
| 13***99 | Governor Group-Unit Injector | 1 |
| 7W***12 | Fastener Group-Governor; Fastener Group(Governor) (~1c K5811) | 1 |
130-7323 Governor Gp-Unit Injector
| 10***12 | Clevis | 1 |
| 10***13 | Piston-Servo | 1 |
| 10***87 | Ring-Tolerance | 1 |
131-7899 Governor Gp-Unit Injector
| 13***23 | Governor Group-Unit Injector | 1 |
| 13***89 | Cam-Torque | 1 |
| 13***99 | Governor Group-Unit Injector | 1 |
8l-3471 Joint As-Tube
| 8L***71 | Joint As-Tube | 1 |
| 9X***36 | Seal | 2 |
9y-3943 Lines Gp-Fuel Ratio Control
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 1 |
142-0334 Lines Gp-Fuel
| 09***12 | Clip | 1 |
| 10***53 | Hose As | 1 |
| 11***66 | Bracket | 1 |
149-1350 Lines Gp-Fuel Filter
| 00***64 | End; (Hose) | 2 |
| 09***61 | Strap; (Cable) | 1 |
| 10***29 | Hose; (60-cm) | 0 |
7w-8434 Lines Gp-Governor Oil
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 2 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 2 |
| 6V***28 | Elbow-Face Seal (For 6.35mm Od Tube) | 1 |
192-4302 Pump Gp-Fuel
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
| 13***76 | Strainer; (Fuel Pump) | 1 |
137-2525 Pump Gp-Fuel
| 13***25 | Pump Group-Fuel | 1 |
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
107-7732 Pump Gp-Fuel Injection
| 10***32 | Pump Group-Fuel Injection | 1 |
| 11***18 | Seal-O-Ring; (26.64mm Id) | 1 |
| 12***74 | Seal-O-Ring; (7.59mm'Id) | 1 |
8n-6201 Pump Gp-Fuel Prm & Prim Filter
| 1L***69 | Ring-Retaining | 1 |
| 2H***29 | Ring - Retaining External | 1 |
| 2J***57 | Packing,Preformed Screw Assembly Part Of Kit P/N 5r***25 | 1 |
8n-6200 Pump Gp-Fuel Priming
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 1 |
| 1P***36 | Gasket; (Fuel Priming Pump)(Fuel Priming Pump) | 1 |
| 1P***98 | Valve As; (Fuel Check) | 1 |
159-7574 Pump Gp-Fuel Prm & Prim Filter
| 14***83 | Separator Group-Water | 1 |
| 15***74 | Pump Group-Fuel Prm & Prim Filter | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 4 |
7e-7604 Pump Gp-Fuel Prm & Prim Filter
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
149-5380 Pump Gp-Fuel Transfer
| 08***68 | Spacer | 1 |
| 10***10 | Motor Group-Electric | 1 |
| 13***25 | Pump Group-Fuel | 1 |
149-2683 Separator Gp-Water
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
129-1101 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 12***01 | Valve Group-Check; -Fuel-Fuel Filter | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
Grade References
109-5622 Leveler Gp -40-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5625 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 7 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5624 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5623 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5626 Leveler Gp -Outboard
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5627 Leveler Gp -40-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5628 Leveler Gp -30-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
Hydraulic System
077-3951 Cap Gp-Hydraulic Oil Filler
| 07***51 | Cap As-Filler Breather | 1 |
| 07***32 | Filter Element-Breather; (Hydraulic Oil Filter) | 1 |
| 07***26 | Gasket | 2 |
172-8111 Cooler & Lines Gp-Hyd Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Suppressor As-Arc | 1 |
| 13***69 | Mounting Group-Hydraulic Oil Cooler | 2 |
119-4261 Cooler Gp-Hydraulic Oil
| 11***61 | Cooler Group-Hydraulic Oil | 1 |
| 12***13 | Tube As | 1 |
| 12***14 | Tube As | 1 |
203-4273 Cylinder Gp-Hydraulic -Screed Hoist
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 20***73 | Cylinder Group-Hydraulic; -Screed Hoist | 1 |
| 23***05 | Kit-Seal; (Screed Hoist Cylinder) | 1 |
135-0220 Cylinder Gp-Hydraulic -Hopper
| 13***20 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 13***21 | Kit-Seal; (Hopper Cylinder) | 1 |
| 5E***32 | Ring | 1 |
115-5207 Cylinder Gp-Hydraulic
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 07***69 | Fitting, Grease | 1 |
| 08***25 | Ring; (Backup) | 1 |
203-4276 Cylinder Gp-Hydraulic -Auger Hoist, Lh
| 20***76 | Cylinder Group-Hydraulic; -Auger Hoist, Lh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 25***75 | Kit-Seal; (Auger Hoist) | 1 |
174-3073 Cylinder Gp-Hydraulic -Auger, Lh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 17***73 | Cylinder Group-Hydraulic; -Auger, Lh | 1 |
| 17***07 | Kit-Seal; (Hydraulic Cylinder) | 1 |
174-3072 Cylinder Gp-Hydraulic -Auger, Rh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 07***85 | Washer | 1 |
| 11***60 | Shim; (3-mm Thk) | 1 |
146-3166 Cylinder Gp-Hydraulic -Steering
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 14***66 | Cylinder Group-Hydraulic; -Steering | 1 |
| 15***88 | Seal-Crown | 1 |
133-0959 Cylinder Gp-Hydraulic
| 03***39 | Ring-Back-Up | 1 |
| 09***29 | Lockwire | 1 |
| 11***11 | Kit-Seal | 1 |
203-4275 Cylinder Gp-Hydraulic -Auger Hoist, Rh
| 20***75 | Cylinder Group-Hydraulic; -Auger Hoist, Rh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 24***14 | Kit-Seal; (Auger Hoist) | 1 |
135-9444 Cylinder Gp-Hydraulic -Tow Point
| 13***44 | Cylinder Group-Hydraulic; -Tow Point | 1 |
| 17***34 | Kit-Seal; (Towpoint Cylinder) | 1 |
| 17***36 | Ring-Wear | 1 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 17***15 | Filter Group-Oil; -Hydraulic Tank | 1 |
7x-9958 Filter Gp-Oil
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 05***15 | Gasket | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
123-2872 Filter Gp-Oil
| 03***36 | Seal-O-Ring | 1 |
| 11***35 | Seal-Bowl | 1 |
| 12***72 | Filter Group-Oil | 1 |
177-0264 Filter Gp-Oil -Hydraulic, Conveyor
| 12***73 | Filter-Oil; (Standard Efficiency)(Oil) | 1 |
| 17***64 | Filter Group-Oil; -Hydraulic, Conveyor | 1 |
| 17***22 | Bowl | 1 |
115-8323 Hydraulic Ar
| 10***81 | Lines Group-Grade & Slope | 1 |
| 11***23 | Hydraulic Ar | 1 |
| 11***34 | Lines Group-Propel | 1 |
227-4327 Lines Gp-Brake & Shift -Valve To Final Drive
| 07***84 | Clamp | 5 |
| 13***17 | Hose As | 1 |
| 13***19 | Hose As | 1 |
115-8335 Lines Gp-Conveyor
| 03***92 | Seal; (126.59mm Id) | 1 |
| 03***47 | Spacer | 3 |
| 06***51 | Clamp | 2 |
227-8948 Lines Gp-Conveyor
| 03***92 | Seal; (126.59mm Id) | 1 |
| 03***47 | Spacer | 3 |
| 06***51 | Clamp | 2 |
107-0481 Lines Gp-Grade & Slope
| 10***81 | Lines Group-Grade & Slope | 1 |
| 13***04 | Hose As | 2 |
| 13***05 | Hose As | 2 |
125-9155 Lines Gp-Hopper
| 07***84 | Clamp | 1 |
| 08***56 | Nut | 9 |
| 09***56 | Hose Assem. | 1 |
172-0135 Lines Gp-Hydraulic
| 13***33 | Hose As | 1 |
| 17***35 | Lines Group-Hydraulic | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
148-6738 Lines Gp-Paver Ventilation
| 10***39 | Key-Square | 1 |
| 14***51 | Valve-Flow Control; (Blower Motor) | 1 |
| 14***05 | Hose As | 1 |
115-8340 Lines Gp-Screed Drive
| 10***99 | Pump Group-Gear | 1 |
| 10***57 | Connector | 1 |
| 11***40 | Lines Group-Screed Drive | 1 |
121-1268 Lines Gp-Screed Elevation
| 10***79 | Pin | 4 |
| 11***55 | Hose As | 1 |
| 11***79 | Plate | 1 |
115-8338 Lines Gp-Service Brake
| 10***81 | Hose As | 1 |
| 11***38 | Lines Group-Service Brake | 1 |
| 13***98 | Hose As | 1 |
115-8337 Lines Gp-Steering
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 07***43 | Steering Column Group | 1 |
| 10***02 | Hose As | 1 |
115-8339 Lines Gp-Throttle
| 08***86 | Clamp | 8 |
| 10***01 | Bracket-Clevis | 1 |
| 10***03 | Pin-Clevis | 1 |
136-1539 Lines Gp-Truck Hitch
| 08***73 | Clamp | 4 |
| 13***03 | Hose As | 1 |
| 13***04 | Hose As | 1 |
107-0484 Lines Gp-Truck Hitch
| 08***73 | Clamp | 4 |
| 10***84 | Lines Group-Truck Hitch | 1 |
| 11***61 | Tube As | 1 |
180-3718 Lines Gp-Truck Hitch
| 08***45 | Clamp | 4 |
| 08***56 | Nut | 4 |
| 08***73 | Clamp | 4 |
228-6316 Lines Gp-Vibratory
| 10***57 | Connector | 1 |
| 12***95 | Hose As | 1 |
| 13***32 | Hose As | 1 |
197-4575 Manifold Gp-Control -Propel
| 10***21 | Plug | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***09 | Kit-Bolt | 1 |
194-3680 Manifold Gp-Control
| 10***21 | Plug | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***09 | Kit-Bolt | 1 |
119-4360 Manifold Gp-Control
| 10***21 | Plug | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***09 | Kit-Bolt | 1 |
127-5435 Manifold Gp-Cooling
| 12***35 | Manifold Group-Cooling | 1 |
| 13***15 | Valve-Check | 2 |
| 7M***85 | Seal,Adapter,Motor Part Of Kit P/N 5r***29 | 6 |
107-0002 Manifold Gp-Suction
| 10***02 | Manifold Group-Suction | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
227-3031 Motor Gp-Gear -Hydraulic Generator
| 08***91 | Valve As-Check; (Hydraulic Fan Oil) | 1 |
| 12***47 | Kit-Seal; (Check Valve) | 1 |
| 13***35 | Seal-Shaft | 1 |
6r-2203 Motor Gp-Gear
| 1G***84 | Kit-Seal | 1 |
| 1G***85 | Bearing As | 2 |
| 1G***86 | Flange | 1 |
197-1728 Motor Gp-Gear -Blower Fan
| 16***39 | Shim; (1.75-mm Thk) | 1 |
| 19***28 | Motor Group-Gear; -Blower Fan | 1 |
| 1F***22 | Bearing (.500" Long) | 4 |
120-8692 Motor Gp-Piston
| 03***20 | Ring | 4 |
| 07***53 | Pin; (Spring) | 4 |
| 10***83 | Bearing | 2 |
119-8499 Motor Gp-Piston
| 11***99 | Motor Group-Piston | 1 |
| 15***09 | Kit-Seal; (Front Wheel Assist Motor) | 1 |
| 15***11 | Collar-Seal | 1 |
193-1008 Motor Gp-Piston -Propel, Rh
| 09***44 | Ring-Retaining | 1 |
| 10***19 | Ring-Retaining | 1 |
| 15***09 | Kit-Seal; (Front Wheel Assist Motor) | 1 |
8i-0843 Motor Gp-Piston
| 1G***74 | Piston | 7 |
| 1G***75 | Guide-Slipper | 1 |
| 1J***74 | Ring-Retaining | 2 |
193-1007 Motor Gp-Piston -Propel, Lh
| 09***44 | Ring-Retaining | 1 |
| 10***19 | Ring-Retaining | 1 |
| 15***09 | Kit-Seal; (Front Wheel Assist Motor) | 1 |
156-7830 Motor Gp-Piston -Propel
| 03***20 | Ring | 4 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 07***53 | Pin; (Spring) | 4 |
119-8498 Motor Gp-Piston
| 11***98 | Motor Group-Piston | 1 |
| 15***09 | Kit-Seal; (Front Wheel Assist Motor) | 1 |
| 15***11 | Collar-Seal | 1 |
223-0581 Motor Gp-Piston -Drag Conveyor
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
240-7327 Pump & Mtg Gp-Screed Vibratory
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***57 | Elbow As. | 1 |
226-2451 Pump Gp-Gear -Screed
| 22***51 | Pump Group-Gear; -Screed | 1 |
| 24***29 | Kit-Seal; (Screed Gear Pump) | 1 |
| 24***41 | Kit-Solenoid Valve; (Screed Gear Pump) | 1 |
104-4199 Pump Gp-Gear
| 10***99 | Pump Group-Gear | 1 |
| 11***64 | Kit-Valve Seal | 1 |
| 13***93 | Kit-Pump Seal | 1 |
8i-0836 Pump Gp-Piston -Auxiliary
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 2 |
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 8 |
| 05***33 | Seal | 1 |
8i-0962 Pump Gp-Piston
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 2 |
105-8881 Pump Gp-Piston -Propel
| 03***04 | Key | 1 |
| 03***05 | Seal-O-Ring | 2 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
105-8880 Pump Gp-Piston -Propel
| 03***04 | Key | 1 |
| 03***05 | Seal-O-Ring | 2 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
197-5326 Pump Gp-Piston
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 2 |
| 15***20 | Shaft | 1 |
| 15***46 | Key | 1 |
8i-0961 Pump Gp-Piston
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 1 |
104-9268 Pump Gp-Piston
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 2 |
| 05***33 | Seal | 1 |
| 06***45 | Plug | 1 |
160-5113 Pump Gp-Piston
| 00***63 | Seal-O-Ring; (55.24mm Id) | 2 |
| 03***16 | Bolt-Self Locking; (1/4unc X 3/4) | 8 |
| 10***52 | Cover-Pintle | 2 |
154-6612 Pump Gp-Piston -Drag Conveyor, Auger Conveyor
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 1 |
154-6613 Pump Gp-Piston -Drag Conveyor, Auger Conveyor
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 2 |
9t-2031 Rotating Gp-Pump
| 00***83 | Ring-Snap | 1 |
| 9T***31 | Rotating Group-Pump; -Steering, Pilot | 1 |
| 9T***57 | Pin | 3 |
6e-6569 Rotating Gp-Pump
| 00***55 | Ring-Retaining | 1 |
| 3T***49 | Bolt-Socket Hd; (M6 X 1.0 X 25) | 4 |
| 6E***69 | Rotating Group-Pump; -Implement | 1 |
111-1326 Tank Gp-Hydraulic
| 00***15 | Nipple-Pipe; (59.4mm Long) | 1 |
| 07***51 | Cap As-Filler Breather | 1 |
| 10***40 | Tank As-Hydraulic | 1 |
144-3556 Tank Gp-Hydraulic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***26 | Tank Group-Hydraulic | 1 |
| 12***00 | Plate | 1 |
134-4720 Valve Gp-Bank
| 08***80 | Case As | 4 |
| 08***83 | Body | 2 |
| 08***85 | Spring | 4 |
154-1424 Valve Gp-Control -Conveyor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***29 | Nut-Retaining | 2 |
| 10***33 | Valve-Check | 1 |
216-7961 Valve Gp-Control -Conveyor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***29 | Nut-Retaining | 2 |
| 10***33 | Valve-Check | 1 |
115-7183 Valve Gp-Control -Right Grade, Hopper
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***09 | Kit-Bolt | 2 |
| 11***83 | Valve Group-Control; -Right Grade, Hopper | 1 |
160-2451 Valve Gp-Control -Flow
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***16 | Solenoid As | 1 |
| 13***11 | Valve-Check | 1 |
115-0060 Valve Gp-Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***18 | Coil | 1 |
| 10***29 | Nut-Retaining | 2 |
169-0166 Valve Gp-Counterbalance
| 07***27 | Kit-Seal; (Counterbalance Valve) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 12***16 | Solenoid As | 2 |
190-4168 Valve Gp-Flow Control
| 19***68 | Valve Group-Flow Control | 1 |
| 19***01 | Coil | 1 |
| 20***76 | Kit-Seal; (Flow Control Valve)(Front Wheel Assist) | 1 |
132-7429 Valve Gp-Manifold
| 13***29 | Valve Group-Manifold | 1 |
| 13***92 | Valve-Solenoid | 1 |
| 13***93 | Valve-Relief | 1 |
116-6863 Valve Gp-Pressure Reducing
| 11***63 | Valve Group-Pressure Reducing; -Brake, Shift | 1 |
| 15***52 | Cartridge-Pump | 1 |
| 7X***81 | Kit-Seal; (Pressure Reducing Valve) | 1 |
168-8609 Valve Gp-Pressure Reducing
| 16***09 | Valve Group-Pressure Reducing; -Truck Hitch | 1 |
| 17***45 | Kit-Seal; (Pressure Reducing Valve) | 1 |
| 17***46 | Valve | 1 |
196-6988 Valve Gp-Pump Control
| 19***62 | Pin | 1 |
| 19***64 | Body | 1 |
| 19***88 | Valve Group-Pump Control | 1 |
257-5145 Valve Gp-Pump Control -Auxiliary Pump
| 25***45 | Valve Group-Pump Control; -Auxiliary Pump | 1 |
| 4J***33 | Seal Fuel Injection Pump | 1 |
| 5L***58 | Seal 14 mm(.551 In.) I. D. | 1 |
152-7576 Valve Gp-Pump Control -Conveyor
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 12***32 | Setscrew-Socket; (M8x1.25x45-mm) | 2 |
197-6906 Valve Gp-Pump Control
| 15***28 | Plug | 1 |
| 19***06 | Valve Group-Pump Control | 1 |
| 19***27 | Spool | 1 |
7r-0197 Pump Gp-Metering -Steering
| 07***24 | Kit-Seal | 1 |
| 17***48 | Kit-Check Valve; (Steering Metering Pump) | 1 |
| 3G***89 | Cap | 1 |
Implements
122-0854 Berm Ar -Rh, 20-Inch
| 10***52 | Harness As-Screed; (Extension) | 1 |
| 12***54 | Berm Ar; -Rh, 20-Inch | 1 |
| 12***63 | Berm Group; -Rh, 20-Inch | 1 |
122-0856 Berm Ar -Rh, 26-Inch
| 10***52 | Harness As-Screed; (Extension) | 1 |
| 12***56 | Berm Ar; -Rh, 26-Inch | 1 |
| 12***66 | Berm Group; -Rh, 26-Inch | 1 |
122-0855 Berm Ar -Lh, 20-Inch
| 10***52 | Harness As-Screed; (Extension) | 1 |
| 12***55 | Berm Ar; -Lh, 20-Inch | 1 |
| 12***64 | Berm Group; -Lh, 20-Inch | 1 |
122-0853 Berm Ar -Lh, 14-Inch
| 10***51 | Harness As-Screed; (Extension) | 1 |
| 12***53 | Berm Ar; -Lh, 14-Inch | 1 |
| 12***61 | Berm Group; -14-Inch, Lh | 1 |
122-0858 Berm Ar -Lh, 26-Inch
| 10***52 | Harness As-Screed; (Extension) | 1 |
| 12***58 | Berm Ar; -Lh, 26-Inch | 1 |
| 12***67 | Berm Group; -Lh, 26-Inch | 1 |
122-0864 Berm Gp -Lh, 20-Inch
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 10***19 | Locknut; (2-1/4-16-Thd) | 3 |
| 10***31 | Nut-Spring | 2 |
122-0867 Berm Gp -Lh, 26-Inch
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 10***19 | Locknut; (2-1/4-16-Thd) | 3 |
| 10***31 | Nut-Spring | 2 |
122-0861 Berm Gp -14-Inch, Lh
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 10***19 | Locknut; (2-1/4-16-Thd) | 3 |
| 10***31 | Nut-Spring | 2 |
122-0863 Berm Gp -Rh, 20-Inch
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 10***19 | Locknut; (2-1/4-16-Thd) | 3 |
| 10***31 | Nut-Spring | 2 |
122-0866 Berm Gp -Rh, 26-Inch
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 10***19 | Locknut; (2-1/4-16-Thd) | 3 |
| 10***31 | Nut-Spring | 2 |
185-5433 Extension Ar-Auger
| 18***33 | Extension Ar-Auger | 1 |
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 21***53 | Extension Group-Main Frame | 4 |
177-6816 Extension Gp-Screed
| 12***73 | Extension As | 2 |
| 12***78 | Bar | 2 |
| 12***79 | Bar | 2 |
111-1370 Hitch Ar-Truck
| 11***70 | Hitch Ar-Truck | 1 |
| 13***82 | Hitch Group-Truck | 1 |
| 1D***18 | Nut-Plt-Jam; (5/8unc) | 1 |
166-7676 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
133-8682 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
166-7677 Hitch Gp-Truck
| 14***18 | Connector As | 1 |
| 16***05 | Connector As | 1 |
| 16***76 | Hitch Group-Truck; -Oscillating | 1 |
180-6338 Hitch Gp-Truck
| 16***76 | Hitch Group-Truck; -Oscillating | 1 |
| 18***96 | Guard As | 1 |
| 18***38 | Hitch Group-Truck | 1 |
180-9348 Indicator Gp-Depth
| 17***32 | Film-Identification; (Tow Point Indicator) | 2 |
| 17***73 | Plate | 2 |
| 17***33 | Bar | 2 |
180-6340 Installation Ar-Truck Hitch
| 18***18 | Lines Group-Truck Hitch | 1 |
| 18***38 | Hitch Group-Truck | 1 |
| 18***40 | Installation Ar-Truck Hitch | 1 |
136-1661 Installation Ar-Truck Hitch
| 11***70 | Hitch Ar-Truck | 1 |
| 13***39 | Lines Group-Truck Hitch | 1 |
| 13***61 | Installation Ar-Truck Hitch | 1 |
116-5903 Installation Ar-Truck Hitch
| 10***84 | Lines Group-Truck Hitch | 1 |
| 11***03 | Installation Ar-Truck Hitch | 1 |
| 16***77 | Hitch Group-Truck | 1 |
102-4646 Roller Ar-Push
| 10***46 | Roller Ar-Push | 1 |
| 11***58 | Screw; 12-Point Screw, Screw, Roller Group-Push | 1 |
| 5C***66 | Bolt (25 mm Long); (5/8-11x1-In) | 1 |
102-4643 Roller Ar-Push
| 10***43 | Roller Ar-Push | 1 |
| 10***27 | Roller Group-Push | 1 |
| 5C***66 | Bolt (25 mm Long); (5/8-11x1-In) | 1 |
118-8358 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 10 |
| 11***57 | Roller As | 1 |
| 11***58 | Screw; 12-Point Screw, Screw, Roller Group-Push | 1 |
102-5927 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 10***40 | Cover-End | 2 |
| 10***42 | Housing As-Push Roller | 1 |
Lubrication System
131-4810 Breather Gp -Crankcase
| 13***10 | Breather Group; -Crankcase | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 4P***36 | Base | 1 |
1n-3477 Breather Gp -Crankcase
| 1N***77 | Breather Group; Breather Group | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 5N***85 | Washer-Sealing; (Sealing) | 1 |
103-0803 Filler Gp-Engine Oil
| 10***03 | Filler Group-Engine Oil | 1 |
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
| 6L***09 | Seal-Rubber | 1 |
4p-8183 Filter Gp-Engine Oil
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 23***54 | Gasket | 1 |
| 24***64 | Spring; (Yoke) | 2 |
7w-8420 Fumes Disposal Gp
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 1 |
| 7C***52 | Hose-Disposal; (Fumes)(Fumes) | 1 |
110-9674 Gauge Gp-Oil Level (Dipstick)
| 11***74 | Gauge Group-Oil Level (Dipstick) | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 4P***56 | Gauge-Oil Level (Dipstick) | 1 |
4w-2914 Lines Gp-Engine Oil
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
| 4W***14 | Lines Group-Engine Oil | 1 |
4p-7703 Lines Gp-Turbocharger Oil
| 11***19 | Tube As | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 1S***57 | Gasket; (Turbocharger-Oil Supply) | 1 |
119-2924 Pump Gp-Engine Oil
| 10***05 | Spring | 1 |
| 11***24 | Pump Group-Engine Oil | 1 |
| 2W***77 | Body As-Oil Pump | 1 |
200-4497 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
115-4138 Pump Gp-Engine Oil
| 11***38 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
4w-2195 Pump Gp-Engine Oil
| 11***24 | Pump Group-Engine Oil | 1 |
| 4W***95 | Pump Group-Engine Oil; Engine Oil Pump Group | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
115-4123 Pump Gp-Engine Oil
| 10***05 | Spring | 1 |
| 11***74 | Shaft As | 1 |
| 11***16 | Shaft As-Idler | 1 |
103-9408 Valve Gp-Fluid Sampling
| 10***08 | Valve Group-Fluid Sampling; -Coolant | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
Machine Arrangement
115-8350 Common Ar
| 11***22 | Electrical Ar | 1 |
| 11***23 | Hydraulic Ar | 1 |
| 11***24 | Structural Ar | 1 |
123-2264 Common Ar
| 11***22 | Electrical Ar | 1 |
| 11***23 | Hydraulic Ar | 1 |
| 11***24 | Structural Ar | 1 |
195-9753 Kit-Maintenance
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
| 10***87 | Switch As-Toggle; (Screed Raise/Hld/Float) | 1 |
Operator Station
121-6746 Console Ar
| 12***46 | Console Ar | 1 |
| 12***47 | Console Group-Operator | 1 |
121-6747 Console Gp-Operator
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 4 |
| 03***49 | Nut-Self Lock; (No.10.Unc) | 4 |
| 08***53 | Bolt; (3/8-16x0.625-In)(3/8-16-2a Thd) | 2 |
114-0322 Gauge Gp-Cluster
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***22 | Gauge Group-Cluster | 1 |
| 11***81 | Kit-Gauge Housing | 1 |
104-7454 Horn & Alarm Gp
| 10***54 | Horn & Alarm Group | 1 |
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 1 |
132-3090 Lever Gp-Propel
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
199-8398 Module Gp-Speedometer & Tach
| 19***98 | Module Group-Speedometer & Tach | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 5 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 5 |
154-9598 Panel Gp-Instrument
| 07***00 | Switch As-Toggle; (Starter Engine Battery Charger) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***87 | Switch As-Toggle; (Screed Raise/Hld/Float) | 1 |
132-1182 Panel Gp-Instrument
| 07***00 | Switch As-Toggle; (Starter Engine Battery Charger) | 2 |
| 10***00 | Kit-Connecting Plug; (12-Pin)(Electronic Control) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
104-7470 Platform Gp
115-8329 Seat Gp
| 10***32 | Seat Group | 1 |
| 11***29 | Seat Group | 1 |
| 17***72 | Seat Group | 1 |
103-7332 Seat Gp
| 10***17 | Post As-Seat | 1 |
| 10***32 | Seat Group | 1 |
| 11***84 | Seat Group | 1 |
119-1784 Seat Gp
| 11***84 | Seat Group | 1 |
| 19***76 | Kit-Armrest; (Lh) | 1 |
| 19***77 | Kit-Armrest; (Rh) | 1 |
170-5472 Seat Gp
| 10***68 | Grip-Handle | 2 |
| 10***41 | Umbrella Group; -Bg-225c | 1 |
| 11***84 | Seat Group | 1 |
106-8541 Umbrella Gp
| 10***41 | Umbrella Group; -Bg-225c | 1 |
187-6649 Umbrella Gp
| 18***49 | Umbrella Group; -Ap-650b | 1 |
Power Train
212-8843 Assist Gp-Front Wheel
| 00***31 | Cup-Bearing | 4 |
| 00***43 | Nut | 2 |
| 03***01 | Screw; (5/16-18x1.56-In) | 4 |
136-3091 Assist Gp-Front Wheel
| 00***31 | Cup-Bearing | 4 |
| 00***43 | Nut | 2 |
| 06***15 | Nut; (1-1/4-12-Thd) | 3 |
149-4890 Brake & Planetary Gp
| 12***80 | Kit-Lining; (Brake, Planetary, Output)(Outbrd.) | 1 |
| 12***81 | Kit-Lining; (Brake, Planetary, Input)(Inbrd.) | 1 |
| 12***20 | Plug | 2 |
207-9592 Brake & Planetary Gp
| 12***80 | Kit-Lining; (Brake, Planetary, Output)(Outbrd.) | 1 |
| 12***81 | Kit-Lining; (Brake, Planetary, Input)(Inbrd.) | 1 |
| 12***20 | Plug | 2 |
128-2482 Filter Gp-Oil
| 07***92 | Filter-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 12***82 | Filter Group-Oil; -Propel | 1 |
226-0810 Final Drive Gp
| 0T***56 | Bolt (2 1/2" Long) | 20 |
| 13***48 | Mount-Planetary | 1 |
| 13***10 | Plate-Cover | 1 |
193-2340 Kit-Motor Support
| 19***37 | Plate; (Lh) | 1 |
| 19***39 | Plate; (Rh) | 1 |
| 19***40 | Kit-Motor Support | 1 |
115-8334 Lines Gp-Propel
| 03***92 | Seal; (126.59mm Id) | 1 |
| 10***80 | Pump Group-Piston; -Propel | 1 |
| 10***81 | Pump Group-Piston; -Propel | 1 |
118-8302 Manifold Gp-Front Wheel Drive
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***59 | Valve-Flow | 1 |
| 11***60 | Valve-Relief | 1 |
128-4090 Manifold Gp-Front Wheel Drive
| 11***59 | Valve-Flow | 1 |
| 11***61 | Valve-Relief; (Front Wheel Assist) | 1 |
| 12***84 | Valve-Check | 2 |
136-4523 Planetary Gp-Final Drive
| 07***78 | Seal-O-Ring | 1 |
| 07***31 | Stud | 12 |
| 08***62 | Gear-Planetary; (34-Teeth) | 4 |
207-9594 Planetary Gp-Final Drive
| 07***78 | Seal-O-Ring | 1 |
| 07***31 | Stud | 12 |
| 08***62 | Gear-Planetary; (34-Teeth) | 4 |
190-6345 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 15***84 | Cone | 2 |
| 15***85 | Cup | 2 |
109-3655 Valve Gp-Solenoid
| 10***18 | Coil | 1 |
| 10***55 | Valve Group-Solenoid | 1 |
| 13***99 | Valve-Solenoid; (Hydraulic Fluid) | 1 |
119-8107 Wheel & Tire Gp
| 11***05 | Wheel As | 1 |
| 11***07 | Wheel & Tire Group | 1 |
| 12***11 | Tire-Solid; (8in) | 2 |
119-8698 Wheel & Tire Gp
| 10***34 | Extension-Valve | 1 |
| 10***35 | Valve-Rim | 1 |
| 10***52 | Tire; (Tire 18.00 X 25-36 Ply) | 1 |
124-3042 Wheel & Tire Gp
| 08***24 | Tire; (Tubeless 18x25-16ply) | 1 |
| 12***42 | Wheel & Tire Group | 1 |
| 18***59 | Wheel Group | 1 |
124-3041 Wheel Ar
| 12***41 | Wheel Ar | 1 |
| 12***42 | Wheel & Tire Group | 2 |
119-8102 Wheel Ar
| 11***02 | Wheel Ar | 1 |
| 11***98 | Wheel & Tire Group | 2 |
183-1160 Wheel Gp
| 11***25 | Wheel As | 1 |
| 18***60 | Wheel Group | 1 |
| 1J***87 | Flange | 2 |
180-8059 Wheel Gp
| 12***43 | Wheel As | 1 |
| 18***59 | Wheel Group | 1 |
| 4K***79 | Seal-O-Ring | 1 |
Service Equipment And Supplies
115-8328 Finish Ar -Ap-1000b
| 11***28 | Finish Ar; -Ap-1000b | 1 |
| 12***16 | Plate & Film Group | 1 |
126-1745 Finish Ar -Bg-260c
| 12***66 | Plate & Film Group | 1 |
| 12***45 | Finish Ar; -Bg-260c | 1 |
7r-4741 Lines Gp-Spray Down
| 08***77 | Adapter | 1 |
| 1G***70 | Extension-Curve | 1 |
| 1G***79 | Hose As | 1 |
129-9126 Parts Gp-Uptime
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 08***41 | Switch; (Machine/Engine Remote Stop) | 1 |
| 10***88 | Nozzle | 1 |
123-2266 Plate & Film Gp
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 4 |
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 08***67 | Film-Warning; (No Step)(No Step) | 2 |
120-4616 Plate & Film Gp
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 4 |
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 08***67 | Film-Warning; (No Step)(No Step) | 2 |
239-3562 Plate & Film Gp -French
| 15***38 | Plate-Warning; (Operating Instructions) | 1 |
| 15***59 | Film; (Conveyor Control Module) | 1 |
| 15***65 | Film; (Propel Ecm) | 1 |
115-5852 Plate & Film Gp -Engine Information
| 11***52 | Plate & Film Group; -Engine Information | 1 |
149-7395 Reel Gp-Washdown Hose
| 08***89 | Reel Group-Washdown Hose | 1 |
| 14***31 | Connector As | 1 |
| 14***51 | Elbow Group | 1 |
087-0889 Reel Gp-Washdown Hose
| 08***89 | Reel Group-Washdown Hose | 1 |
| 17***28 | Fitting-Swivel | 1 |
| 17***29 | Seal-V-Ring | 1 |
Slope And Grade Control
194-9341 Beam Gp-Transverse
| 18***74 | Plate | 1 |
| 19***41 | Beam Group-Transverse | 1 |
| 7T***99 | Link | 3 |
119-1766 Beam Gp-Transverse
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 10 |
| 08***15 | Cushion-Rubber | 2 |
| 11***66 | Beam Group-Transverse | 1 |
154-3075 Beam Gp-Transverse
| 08***65 | Bracket | 1 |
| 08***15 | Cushion-Rubber | 2 |
| 12***34 | Mount As | 1 |
110-2420 Cable Gp-Control
| 10***20 | Cable As-Rh | 1 |
| 10***21 | Cable As-Lh | 1 |
| 10***22 | Cable As | 2 |
168-6500 Cable Gp-Control -Grade
| 10***63 | Clamp | 1 |
| 11***95 | Plug | 1 |
| 11***63 | Cable; (Coiled) | 1 |
108-0042 Control Gp-Grade
| 10***42 | Control Group-Grade | 1 |
| 11***93 | Bracket | 1 |
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
113-1195 Control Gp-Grade & Slope -Topcon Control System
| 10***31 | Bracket As | 1 |
| 10***37 | Bracket As | 1 |
| 10***76 | Tube-Control | 2 |
123-0885 Control Gp-Grade & Slope -Premier Control System
| 11***43 | Mounting Group-Control; -Topcon Control System | 2 |
| 11***29 | Cap-Dust | 1 |
| 12***36 | Bracket-Mounting | 2 |
168-5031 Control Gp-Grade & Slope
| 14***22 | Cover | 1 |
| 14***25 | Seal-Bushing | 1 |
| 14***26 | Gasket | 1 |
209-3125 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***97 | Plug | 1 |
144-7938 Control Gp-Grade & Slope -Topcon Control System
| 10***76 | Tube-Control | 2 |
| 11***20 | Cable Group-Control | 1 |
| 11***43 | Mounting Group-Control; -Topcon Control System | 2 |
239-2367 Control Gp-Grade & Slope
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
190-7525 Control Gp-Grade & Slope -Topcon Control System
| 10***94 | Junction Box | 2 |
| 10***98 | Control Group-Grade & Slope | 2 |
| 10***08 | Sensor Group-Grade; (Control) | 2 |
192-9234 Control Gp-Grade & Slope -Topcon Control System
| 10***63 | Clamp | 2 |
| 10***20 | Cable As-Rh | 1 |
| 10***21 | Cable As-Lh | 1 |
130-7053 Control Gp-Grade & Slope -Premier Control System
| 12***36 | Bracket-Mounting | 2 |
| 13***53 | Control Group-Grade & Slope; -Premier Control System | 1 |
| 16***30 | Sensor-Slope | 1 |
109-0187 Control Gp-Grade & Slope -Premier Control System
| 10***87 | Control Group-Grade & Slope; -Premier Control System | 1 |
| 11***43 | Mounting Group-Control; -Topcon Control System | 2 |
| 12***48 | Mounting Group-Control; -Premier Control System | 1 |
194-6990 Control Gp-Grade & Slope -Premier Control System
| 11***29 | Cap-Dust | 1 |
| 12***36 | Bracket-Mounting | 2 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
209-3130 Control Gp-Grade & Slope
| 11***10 | Screw-Pan Head | 8 |
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
209-3129 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***97 | Plug | 1 |
112-4043 Mounting Gp-Control -Topcon Control System
| 11***43 | Mounting Group-Control; -Topcon Control System | 1 |
| 13***89 | Support As; (Sensor) | 1 |
| 25***04 | Spacer | 4 |
135-3860 Mounting Gp-Control -Premier Control System
| 13***60 | Mounting Group-Control; -Premier Control System | 1 |
| 13***50 | Mount As | 2 |
| 18***61 | Bracket | 1 |
122-0348 Mounting Gp-Control -Premier Control System
| 12***48 | Mounting Group-Control; -Premier Control System | 1 |
| 13***84 | Plate As | 2 |
| 13***85 | Mount As | 2 |
185-4064 Sensor Ar-Grade -Premier Control System
| 11***93 | Bracket | 1 |
| 12***91 | Sensor Group-Sonic; -Grade | 1 |
| 18***44 | Jack Group-Height Adjuster | 1 |
185-4061 Sensor Ar-Grade -Premier Control System
| 11***93 | Bracket | 1 |
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 18***44 | Jack Group-Height Adjuster | 1 |
209-3131 Sensor Gp-Grade -Sonic
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
209-3132 Sensor Gp-Grade -Averaging Ski
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
122-0095 Sensor Gp-Grade -Sonic
| 11***29 | Cap-Dust | 1 |
| 12***95 | Sensor Group-Grade; -Sonic | 1 |
| 14***16 | Faceplate | 1 |
122-0094 Sensor Gp-Grade
| 11***29 | Cap-Dust | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
122-0090 Sensor Gp-Grade -Averaging Ski
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 12***99 | Arm-Follower | 1 |
122-0091 Sensor Gp-Sonic -Grade
| 12***91 | Sensor Group-Sonic; -Grade | 1 |
| 12***95 | Sensor Group-Grade; -Sonic | 1 |
| 13***83 | Cable As | 1 |
Undercarriage
119-8112 Bogie Gp
| 00***31 | Cup-Bearing | 8 |
| 00***43 | Nut | 4 |
| 03***01 | Screw; (5/16-18x1.56-In) | 4 |
115-8345 Drive Gp-Rear
| 0T***56 | Bolt (2 1/2" Long) | 20 |
| 11***07 | Nut; (3/4-16-Thd) | 12 |
| 11***45 | Drive Group-Rear | 1 |
239-2366 Mounting Gp-Averaging Ski
| 23***66 | Mounting Group-Averaging Ski | 1 |
| 28***75 | Collar | 4 |
| 28***77 | Tube | 2 |
115-8325 Undercarriage Ar
| 11***25 | Undercarriage Ar | 1 |
| 11***45 | Drive Group-Rear | 2 |
| 22***10 | Final Drive Group | 2 |
BG-260C serial number reference
The PIN plate on a BG-260C is mounted on the paver tractor frame, usually on the left or right side rail near the operator's station or front of the machine, and it is riveted to the frame steel (not the screed, which carries its own separate plate). The serial number reads as an 8-character string; the first 3 characters are the alphanumeric prefix identifying the model/build series (e.g. 8GN or BYG), and the following digits are the sequential unit number within that prefix run — use the prefix plus digit break to pull the correct parts and service manual for that build range.
| Prefix | Identifies | Notes |
|---|---|---|
| 8GN | BG-260C standard production run | Runs the Cat 3116TA (turbocharged-aftercooled) engine, gross rating about 174 hp (130 kW) at 2200 rpm. A specific effective-serial part update is reported starting around 8GN535-Up, though the exact break point is worth confirming with a dealer before ordering against it. BG-260C is the Barber-Greene-badge twin of the AP-1000B paver, built on the same chassis and engine but tracked under its own serial prefix. |
| BYG | BG-260C production run | Same 3116TA engine platform as the 8GN range, listed as a separate BG-260C serial-prefix block in Caterpillar's parts and service documentation. Fewer dedicated effective-serial part updates turned up under this prefix than under 8GN — confirm exact break point and production years with your dealer. |
Frequently asked questions
What engine does the Caterpillar BG-260C use?
A Cat 3116TA, a turbocharged and aftercooled 6-cylinder diesel of 6.6L displacement, rated 130 kW (174 hp) gross and 118 kW (158 hp) net at 2200 rpm.
What is the operating weight of the Caterpillar BG-260C?
17,330 kg (38,200 lb) with the Pavemaster 10B screed, or 18,940 kg (41,750 lb) with the Extend-A-Mat 10-20B screed. Weight varies by screed configuration.
What replaced the Caterpillar BG-260C?
The BG-260D succeeded it on a different engine and chassis generation. The BG-260 line continued rather than being retired.
What BG-260C owners discuss
What do owners say about the reliability of the Cat 3116TA engine in the BG-260C?
Consensus among long-time users of the mechanical-unit-injection 3116TA is that it's a strong, serviceable engine when timing and fuel settings stay in spec, but it carries a few well-known weak points. Oil cooler leaks are common because the cooler seals on only two O-rings; treat a seep as routine maintenance, not a sign of a bigger failure. A run of early-1990s blocks cast during a domestic foundry strike had metallurgical defects that caused premature failure, often inside 150-200 hours of run time. Caterpillar extended goodwill warranty coverage on these blocks for years before the program ended. Starter solenoids are a recurring wear item on this generation of engine. Hard or rough starting is most often traced to injector timing or fuel-rack setting drifting out of adjustment rather than to the injectors themselves. Have your dealer pull the engine's build history and verify timing and fuel settings if you see hard starting or a power drop under load.
Why does a BG-260C sometimes wander or fail to track straight while paving?
Operators point to the same short list of causes. A failing or intermittent ground-speed sensor is the most common culprit; it feeds the closed-loop hydrostatic propel system, and when it drops out the machine loses the reference it needs to hold a straight line. A chafed or broken wire in the harness running to that sensor produces the same symptom and can look like a sensor failure until the harness is traced. If the paver pulls to one side going forward but tracks straight in reverse, check the steering linkage and directional control valves for uneven hydraulic response before condemning the sensor. Worn or misadjusted drive components on one side versus the other can also throw off tracking on a wheeled machine. When basic sensor and harness checks don't resolve it, the propulsion controller itself may need dealer-level diagnostics and recalibration. Have your dealer verify propulsion controller calibration if sensor and wiring checks come back clean.
What screed heater issues come up most with this generation of paver?
The diesel-fired screed heater is a well-known source of complaints across this class of machine, and the BG-260C's Extend-A-Mat screed is no exception. Burner ignition trouble, uneven heat across the plate, and fuel supply interruptions are the most-reported symptoms. A cold or uneven screed shows up immediately as tears or drag marks on the first pass. The heater boxes and screed frame take real fatigue from repeated heat-up and cool-down cycles, so frame cracking around the heater mounts is worth checking each season. Burners left running all day instead of cycled as needed wear out faster. Screed height also affects heat-up time: held high off the ground it loses heat to wind, but sitting flat on cold ground it acts as a heat sink and takes longer to reach working temperature. Have your dealer verify burner and ignition system operation if the screed won't hold even heat across its width.
What wear pattern should I expect on the drivetrain of a wheeled paver like the BG-260C?
The BG-260C is a rubber-tire (wheeled) paver, not a tracked machine, so the wear items to watch are the drive tires, steering tires, and wheel bearings and seals rather than track chain and sprockets. Sand-rib-tread drive tires are standard on this class of machine and wear based on how much the operator has been running on abrasive mix or spinning under load. Wheel bearing and hub seal leaks show up as grease or oil weeping at the hub, and left unchecked they lead to bearing play that will itself cause the tracking problems described above. Steering tire wear that's uneven side to side is often a sign the machine has been run with a misaligned or bent steering linkage rather than just normal tire wear. Have your dealer verify wheel bearing preload and hub seal condition on any used unit before putting it back to work.
What electrical and sensor issues are common on this era of Cat/Barber-Greene paver?
This generation of paver runs analog wiring and discrete sensors rather than a modern databus, so the recurring complaint is old-fashioned corrosion and connector fatigue rather than software faults. Wiring exposed to weather, road salt, and constant vibration corrodes at the pins over time; insulation that looks green- or black-stained at a connector is a sign corrosion has already reached the terminal, and if one pin in a connector is bad the rest usually aren't far behind. The ground-speed sensor feeding the propel system is the single most commonly reported sensor failure and produces the tracking symptoms described above. Intermittent grade and slope readings, whether from a sonic ski, averaging beam, or the cross-slope pendulum sensor, are more often traced to a chafed harness or a dirty sensor face than to a failed sensor itself. Have your dealer verify wiring continuity and connector condition before replacing a sensor that's throwing intermittent readings.
What maintenance do the auger and conveyor system need to avoid downtime?
Owners and techs agree the auger and conveyor drivetrain is one of the biggest sources of avoidable downtime on any paver of this type, the BG-260C included. Auger and conveyor drive chains should be checked for wear and kept in tension; general guidance is no more than about 25 mm (1 in) of play at the chain, with sprockets inspected for hooked teeth. The auger and conveyor gearboxes need their oil level checked regularly and topped to the level the manual calls for; running one low is a common cause of premature gearbox wear. Conveyor floor plates wear from constant material flow and should be replaced once they're down to about 3 mm (1/8 in); much thinner than that and they won't survive another full paving season. Auger bearing play (grab the auger and check for movement in the mounts) signals bearings need replacing before flighting wear gets worse. Have your dealer verify gearbox oil condition and chain tension as part of any pre-purchase or seasonal inspection.
What should I check before buying a used BG-260C?
Buyers who've been through this machine consistently check the same items in the same order. Measure the screed plate at all four corners; new is about 12.7 mm (1/2 in) thick, and roughly 6.35 mm (1/4 in) remaining is considered usable life. If the front edge is thinner than the back by more than the expected taper, the previous operator ran it nose-heavy and the plate needs replacing. Check drive and steering tires for uneven wear, and wheel bearings and hubs for leaks or play. Grab the auger to check bearing play, and check conveyor chain tension and floor-plate thickness. Inspect the hopper for impact damage or misalignment from being hit by haul trucks; it's one of the most abused parts on any paver. Ask for engine history on the 3116TA, especially anything pointing to an early-1990s block replaced under Caterpillar's goodwill program. Run the machine through every function warmed up: propel in both directions, steering, screed raise and lower, burners, and augers and conveyors, listening for noise and watching for leaks. Have your dealer verify hydraulic pressures, propulsion controller calibration, and burner and ignition operation before you commit; these are the safety- and cost-critical items a walk-around inspection can't fully confirm.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific BG-260C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.