Caterpillarasphalt paver
Caterpillar BG-245C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar BG-245C is a track-type asphalt paver in the Barber-Greene lineage, built on a steel-track undercarriage derived from Cat D3 track-type tractor technology. Power comes from a Cat 3116TA turbocharged and aftercooled 6-cylinder diesel, 6.6L displacement, rated 174 hp (130 kW) gross / 158 hp (118 kW) net at 2200 rpm, driving a fully hydrostatic track-propel system. Bare tractor weight runs about 16,015 kg (35,300 lb); operating weight spans 17,620-19,250 kg (38,900-42,500 lb) depending on the screed fitted. Sold in the early 2000s, it is a badge-engineered twin of the Cat AP-1050B, offered with Pavemaster or Extend-A-Mat screeds and standard or auxiliary fuel tank capacity.
BG-245C followed the earlier BG-240 series in Caterpillar's post-acquisition Barber-Greene line and was itself succeeded by the BG-2455C, which carried the same D3-based chassis footprint and 3116-family engine forward under revised electronics and screed options. Because the BG-245C and AP-1050B share an identical driveline, hydraulic system, and undercarriage, parts interchange freely between the two nameplates, which keeps used units and salvage parts accessible today. Its mechanically simple unit-injector 3116TA, without later ACERT or common-rail complexity, makes it a durable, easier-to-maintain choice on the used market, still working regional and secondary paving fleets that don't need current emissions-tier compliance.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar BG-245C specifications
Engine
| Engine model | Cat 3116TA — turbocharged, aftercooled, four-stroke, six-cylinder diesel |
| Gross power | 130 kW (174 hp) at 2200 rpm |
| Net power | 118 kW (158 hp) at 2200 rpm (per ISO 9249, SAE J1349, and EEC 80/1269) |
| Displacement | 6.6 L (403 cu in) |
| Bore x Stroke | 105 mm x 127 mm (4.12" x 5.0") |
| Cylinders | 6, in-line |
| Emissions | Meets EPA and CARB emissions engine regulations for this model year; no later emissions-tier update documented for this model |
Weights
| Tractor weight (bare, no screed) | 16,015 kg (35,300 lb) |
| Operating weight — with Extend-A-Mat 10-20B screed | 19,250 kg (approx. 42,500 lb) |
| Operating weight — with Pavemaster 10B screed | 17,620 kg (38,900 lb) |
| Ground pressure | Not published for this model |
Dimensions
| Overall length with push roller — Extend-A-Mat B screed | 6,579 mm (21'7") |
| Overall length with push roller — Pavemaster B screed | 6,096 mm (20'0") |
| Overall length with truck hitch — Extend-A-Mat B screed | 7,061 mm (23'2") |
| Overall length with truck hitch — Pavemaster B screed | 6,579 mm (21'7") |
| Operating width | 3,327 mm (10'11"), both screeds |
| Overall height | 3,378 mm (11'1"), both screeds |
| Transport width, hoppers raised, with end gates | 3,327 mm (10'11") |
| Transport width, hoppers raised, without end gates | 3,048 mm (10'0") |
| Transport height (muffler removed) | 2,769 mm (9'1") |
| Track contact length | 3,048 mm (10') |
Performance
| Paving speed range | 0 - 60.1 m/min (0 - 200 ft/min) |
| Travel speed range | 0 - 8 km/h (0 - 5 mph) |
| Standard paving width | 3,048 mm (10') |
| Paving range with Extend-A-Mat 10-20B screed | 2,438 - 7,366 mm (8' - 24'2"), power-extending from a base width of 3,048 mm (10') up to 5,944 mm (19'6") |
| Paving range with Pavemaster 10B screed | 2,438 - 9,144 mm (8' - 30'), fixed 3,048 mm (10') base width plus bolt-on extensions |
| Hopper capacity | 6.1 cu m (215 cu ft) |
| Minimum turning radius (Pave mode, inside track) | 914 mm (3') |
| Auger height adjustment | 171 mm (6.75") hydraulic raise for clearing large-stone mixes and easing transport loading |
Service capacities (summary)
| Fuel tank | 284 L (75 gal); optional auxiliary tank adds 114 L (30 gal) |
| Hydraulic oil tank | 151.4 L (40 gal) |
| Cooling system | 31.5 L (8.3 gal) |
| Engine oil | Not published for this model — verify with the 3116TA engine service literature |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
BG-245C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat 3116TA turbocharged, aftercooled 6-cylinder diesel | Not published in factory Specalog literature for this model. 3116/3116TA industrial engines typically hold approximately 20-26 L (21-27 qt) with filter depending on oil pan configuration - verify against the dipstick markings or dealer OMM for this serial range. | Cat DEO or Cat DEO-ULS multigrade diesel engine oil. SAE 10W-30 is Caterpillar's preferred grade for the 3116 engine family across ambient temperatures of -18C to 40C (0F to 104F). Step up to SAE 15W-40 for hotter climates (down to -9.5C/15F start) or SAE 10W-40 for a wider mid-range. In colder climates, step down through 5W-40, 5W-30, to 0W-30/0W-40 for cold-soaked starts below -18C (0F). |
| Cooling system | 31.5 L (8.3 US gal) | Cat ELC (Extended Life Coolant) is the preferred fill, sold premixed 1:1 with water for freeze protection to -37C (-34F); Cat ELC concentrate extends protection to -52C (-62F) for arctic service. Cat DEAC (Diesel Engine Antifreeze/Coolant) is the acceptable alternative and needs periodic supplemental coolant additive (SCA) top-off on a maintenance schedule, unlike ELC. Maintain a minimum 30 percent glycol concentration. |
| Fuel tank | 284 L (75 US gal); an optional auxiliary tank adds 114 L (30 US gal) | No. 2 distillate diesel meeting Caterpillar's off-highway diesel fuel specification for the direct-injection 3116TA; blend in No. 1 diesel for winter cold-flow. Minimum cetane number of 40. |
| Hydraulic system and tank (shared propel and implement circuit) | 151.4 L (40 US gal) | Cat HYDO Advanced 10 (SAE 10W) is the preferred fill for the combined hydrostatic-propel and implement hydraulic circuit across -20C to 40C (-4F to 104F). Where a different viscosity suits the climate, Cat HYDO, Cat MTO, Cat DEO/DEO-ULS, or Cat TDTO are accepted alternates covering ranges from 0W-20 in extreme cold up to 15W-40 in hot climates. |
| Grease (track takeup linkage and idler bearings) - spec only, no reservoir | N/A - lube-point service | Select by duty and climate: Cat Ultra 5Moly Grease (NLGI 1) for high-load service, -35C to 40C (-31F to 104F); Cat Advanced 3Moly Grease (NLGI 2) for medium-load service, -20C to 40C (-4F to 104F); or Cat Multipurpose Grease (NLGI 2) for low-load service across the same -20C to 40C (-4F to 104F) range. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar BG-245C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the BG-245C beyond the schedule
Predictive maintenance & fluid analysis
Run S·O·S oil, coolant, and hydraulic samples on a fixed interval, not just when trouble shows. The 3116TA's unit injectors and turbocharger telegraph wear through oil analysis before power loss appears. Because propel, augers, and screed vibration all share the hydrostatic circuit, hydraulic oil particle counts catch pump and motor wear early. Track coolant corrosion inhibitor level closely; the wet-sleeve 3116TA block is vulnerable to liner cavitation if SCA lapses between changes.
Corrective & common repairs
Fuel injector leakback and wear in the 3116TA's unit-injector system are the top driveline complaint, along with hydrostatic propel pump and motor seal leaks under constant paving load. Gateless auger feeder chains and bearings wear from abrasive mix contact and need regular inspection. Screed heater elements and thermostats fail intermittently, causing cold-mat streaking on Pavemaster and Extend-A-Mat screeds. Track shoe bolts and undercarriage fasteners loosen on the D3-derived chassis and need routine torque checks.
Overhaul & rebuild points
Track roller frames, idlers, and final drive gearcases on the D3-derived undercarriage absorb constant slow-speed paving loads and are the first major rebuild items, along with track chain and bushing wear. The 3116TA reaches top-end overhaul territory (liners, pistons, injectors) once oil consumption and blow-by trend up. Hydrostatic propel pumps and motors are rebuild-or-replace items at high hours. Screed plates and vibrator shaft bearings need resurfacing or replacement once mat finish quality drops.
Seasonal & environment servicing
Cold starts depend on the 3116TA's intake air heater and correct coolant glycol/SCA ratio; check both before winter paving season. Hot-mix work in high ambient heat stresses screed heater thermostats and loads the radiator and hydraulic oil cooler, so keep asphalt fines and dust cleared from both cores. Between paving seasons, keep the fuel tank topped to limit condensation, and protect track shoes and undercarriage from asphalt buildup and cracking during cold storage.
BG-245C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 112-6523 | Insert-Fuel Filter | Fuel system service | Check fitment → |
| 1R-0751 | Filter-Fuel | Fuel system service | Check fitment → |
| 119-0073 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 8N-9803 | Filter-Fuel | Fuel system service | Check fitment → |
| 6I-2499 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
BG-245C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 001-006, FMI 05 | Injector solenoid, cylinder 1-6 — circuit open | Broken or corroded injector wiring/connector, or a failed injector solenoid coil on the HEUI-type fuel system | Inspect the injector harness and connectors for damage, test solenoid coil resistance against spec, replace the injector only after the open circuit is confirmed at the connector |
| CID 100, FMI 01 | Engine oil pressure below normal | Low oil level, plugged oil filter, worn oil pump, or a faulty oil pressure sensor | Check oil level and condition first, cross-check the electronic reading against a mechanical gauge before condemning the pump |
| CID 110, FMI 00 | Engine coolant temperature above normal | Low coolant level, radiator core packed with asphalt dust/debris, weak fan drive, or a faulty coolant temperature sensor | Check coolant level, clean the radiator and aftercooler fins (common on pavers working near hot mix), verify fan operation before replacing the sensor |
| CID 105, FMI 00 | Intake manifold (boost) air temperature above normal | Restricted air intake, plugged air-to-air aftercooler core, or high ambient operating temperature | Inspect and clean the aftercooler core and intake ducting, check for exhaust restriction that would raise boost temperature |
| CID 094, FMI 01 | Fuel delivery pressure low | Plugged primary or secondary fuel filter, air drawn into the fuel system, or a weak transfer pump | Replace fuel filters, bleed air from the system, check transfer pump output pressure against spec |
| CID 168, FMI 01 | Battery/system voltage low | Weak or discharged battery, loose or corroded ground strap, failing alternator output | Load-test the battery, inspect and clean ground connections, verify charging output at the alternator |
| No CID/FMI code — analog warning lamp only | On mechanically-governed 3116TA units built without an engine ECM, the operator station uses simple warning lamps/gauges (oil pressure, coolant temperature) instead of a digital fault code | Not applicable — reflects engine governor type rather than a fault condition | Treat any lit warning lamp as an immediate stop-and-inspect condition tied to the specific gauge it corresponds to; confirm engine governor type (mechanical vs. electronic) from the data plate before assuming a CID/FMI code will display at all |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
BG-245C attachments & work tools
Screeds (primary work tool)
The BG-245C tractor pairs with a family of bolt-on vibratory and tamper-bar screeds rather than a fixed integral screed; documented compatible screed models include the AS2251, AS2252C, AS2301, AS2302, AS2302C, AS3251C and AS3301C. Base screed frame widths run 2.5 m (8 ft) or 3.0 m (10 ft) depending on the screed chosen.
Screed width extensions
Heavy-duty screed mainframes accept bolt-on extension sections for wider mats, and hydraulic power-extending front-mount or rear-mount extensions are offered for infinitely variable width within a given range. Reported maximum paving width for this class varies by source and screed/extension combination, from roughly 6 m (20 ft) up to about 9 m (30 ft) — treat as varies by configuration.
Screed heating
Screed plates on this generation are electrically heated for mat temperature control at startup and during slow paving; do not run the wash-down system while heaters are energized.
Auger / feeder system
An independent, hydraulically driven feeder (auger) system reduces segregation and handwork; auger shaft extensions are paired with wider screed extension kits to keep material delivered across the full mat width. Auger diameter figures near 450 mm (17.6 in) appear in aggregator specs but are not confirmed against a factory spec sheet for this exact model — verify with your dealer.
Coupler / mounting system
There is no quick-coupler interface as on excavators. The screed mounts to the tractor via pull-arm tow points (pinned/bolted), and screed extensions bolt directly to the screed mainframe; hydraulic hose and electrical connections route from the tractor to the screed for heat, lift, and crown functions.
Front-end material handling accessories
Windrow elevators and material transfer vehicles are separate self-propelled units positioned ahead of the paver to feed the hopper without truck-to-paver contact; they are not physically mounted attachments but are commonly specified alongside pavers of this class and size.
Hopper and feeder configuration
The hopper uses hydraulically folding wings for material containment and unloading into the feeder system; specific hopper tonnage capacity for this exact model is not confirmed across sources — figures cited for similarly sized pavers are in the low-teens of short tons, but treat as unverified for the BG-245C specifically.
Operator station and guarding
Single operator's station with a dual-slide seat (side-to-side and fore-aft) on the pedestal frame is standard for this class, not an added-cost work tool; auger and conveyor tunnel guarding is factory-standard safety equipment rather than an optional attachment.
All BG-245C assemblies by section
Every catalogued assembly group for the Caterpillar BG-245C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
9y-6984 Aftercooler Gp-Water
| 03***83 | Nipple-Front Axle Suction Port | 2 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
136-0596 Aftercooler Gp-Water
| 03***83 | Nipple-Front Axle Suction Port | 1 |
| 10***46 | Hose | 1 |
| 13***96 | Aftercooler Group-Water | 1 |
6i-2551 Air Cleaner Gp
| 6I***99 | Filter Element As-Air; (Primary) | 1 |
| 6I***00 | Filter Element As-Air; (Secondary) | 1 |
| 6I***51 | Air Cleaner Group | 1 |
104-7483 Air Cleaner Gp
| 10***83 | Air Cleaner Group | 1 |
| 10***01 | Adapter As | 1 |
| 11***33 | Bracket | 2 |
172-0993 Air Cleaner Gp
| 06***70 | Cap | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
143-0458 Air Cleaner Gp
| 14***58 | Air Cleaner Group | 1 |
| 17***87 | Bracket As | 1 |
| 17***93 | Tube As | 1 |
100-5992 Cartridge Gp-Turbocharger
| 10***92 | Cartridge Group-Turbocharger | 1 |
104-7484 Exhaust Gp
| 10***84 | Exhaust Group | 1 |
| 10***74 | Extension As | 1 |
| 11***89 | Muffler | 1 |
143-0459 Exhaust Gp
| 10***70 | Elbow-Exhaust | 1 |
| 10***25 | Coupling-Exhaust | 1 |
| 11***89 | Muffler | 1 |
9y-4968 Lines Gp-Air
| 7C***55 | Hose | 1 |
| 8T***03 | Clamp; (Hose) | 2 |
| 9Y***68 | Lines Group-Air | 1 |
7w-9248 Manifold Gp-Exhaust
| 10***38 | Manifold-Exhaust | 1 |
| 11***00 | Gasket-Manifold | 3 |
| 14***48 | Bolt; (M10x1.5x65-mm)(M10x1.50x65mm) | 12 |
4w-3480 Manifold Gp-Inlet
| 11***50 | Gasket | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 3 |
| 4W***80 | Manifold Group-Inlet; Inlet Manifold Group | 1 |
4m-0310 Precleaner Gp
| 1M***50 | Bowl | 1 |
| 1S***63 | Bolt (5/16) | 1 |
| 4M***10 | Precleaner As | 1 |
121-7746 Precleaner Gp
| 12***46 | Precleaner Group | 1 |
| 13***43 | Clamp-Hose | 1 |
| 1M***50 | Bowl | 1 |
119-3084 Turbocharger Gp
| 11***84 | Turbocharger Group | 1 |
| 12***40 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
124-9340 Turbocharger Gp
| 10***77 | Housing | 1 |
| 11***58 | Cartridge Group-Turbocharger | 1 |
| 12***54 | Seal-O-Ring | 1 |
115-5856 Turbocharger Gp
| 10***92 | Cartridge Group-Turbocharger | 1 |
| 10***69 | Housing; (Compressor) | 1 |
| 11***56 | Turbocharger Group | 1 |
115-4247 Turbocharger Gp
| 11***47 | Turbocharger Group | 1 |
| 11***56 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
Basic Engine
108-5759 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 10***59 | Camshaft Group; (Single) | 1 |
| 13***76 | Camshaft Assem. | 1 |
2w-9608 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 2W***08 | Camshaft Group-Single | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
103-0863 Cover Gp-Cylinder Block
| 10***63 | Cover Group-Cylinder Block | 1 |
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 13***40 | Spacer; (9x15x15-mm Thk) | 1 |
7l-0004 Cover Gp-Front Housing
| 10***20 | Cover As-Front | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
4w-2172 Cover Gp-Valve Mechanism
| 11***40 | Gasket; (Valve Cover) | 1 |
| 11***60 | Cover | 1 |
| 4W***72 | Cover Group-Valve Mechanism; Valve Mechanism Cover Group | 1 |
4w-2197 Crankshaft Gp
| 10***30 | Bearing-Main; (Standard) | 3 |
| 10***25 | Crankshaft Assem. | 1 |
| 10***02 | Bearing-Thrust; (Standard) | 1 |
129-1095 Cylinder Block Gp
| 12***95 | Cylinder Block Group | 1 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
7e-2482 Cylinder Block Gp
| 14***03 | Cylinder Block Group | 1 |
| 1W***07 | Sleeve | 2 |
| 4P***51 | Tube As-Piston Cooling | 6 |
100-4948 Cylinder Block Gp
| 10***48 | Cylinder Block Group | 1 |
| 10***89 | Cylinder Block As | 1 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
149-5403 Cylinder Block Gp
| 14***02 | Pin, Cylinder Block As | 1 |
| 14***03 | Cylinder Block Group | 1 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
115-4107 Cylinder Head As
| 10***10 | Cylinder Head | 1 |
| 11***07 | Cylinder Head As | 1 |
| 11***61 | Sleeve | 6 |
115-4108 Cylinder Head As
| 11***07 | Cylinder Head As | 1 |
| 11***08 | Cylinder Head As | 1 |
| 11***36 | Seal-Valve Stem | 12 |
190-9066 Cylinder Head As
| 11***61 | Sleeve | 6 |
| 16***63 | Insert-Valve Seat; (Inlet) | 6 |
| 19***66 | Cylinder Head As | 1 |
159-0305 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
| 14***71 | Cylinder Head Group | 1 |
9y-8871 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 11***65 | Cylinder Head Group | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
115-4165 Cylinder Head Gp
| 11***07 | Cylinder Head As | 1 |
| 11***65 | Cylinder Head Group | 1 |
| 11***36 | Seal-Valve Stem | 12 |
140-7371 Cylinder Head Gp
| 11***36 | Seal-Valve Stem | 12 |
| 13***19 | Valve-Exhaust | 6 |
| 14***71 | Cylinder Head Group | 1 |
7c-2428 Damper & Pulley Gp
| 10***50 | Pulley; (3 Groove) | 1 |
| 20***88 | Damper Assem. | 1 |
| 6V***30 | Bolt; (M10x1.5x60-mm) | 8 |
9y-9177 Damper & Pulley Gp
| 20***88 | Damper Assem. | 1 |
| 6V***30 | Bolt; (M10x1.5x60-mm) | 8 |
| 9Y***76 | Pulley-Crankshaft | 1 |
4p-2844 Damper & Pulley Gp
| 20***88 | Damper Assem. | 1 |
| 4P***43 | Pulley | 1 |
| 4P***44 | Damper & Pulley Group | 1 |
136-8877 Drain Gp-Engine Oil
| 13***77 | Drain Group-Engine Oil | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
7c-4566 Drain Gp-Engine Oil
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 7C***66 | Drain Group-Oil Pan; -Magnetic Plug | 1 |
108-5434 Drive Gp-Accessory
| 10***60 | Adapter-Pump | 1 |
| 10***34 | Drive Group-Accessory | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
7c-0044 Drive Gp-Fan
| 4W***03 | Cup-Roller Bearing | 2 |
| 4W***04 | Cone-Roller Bearing | 2 |
| 4W***42 | Spacer; (35.3x45.5x38.331-mm Thk) | 1 |
104-8678 Drive Gp-Pump
| 00***44 | Elbow; (45-Deg) | 1 |
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 10***78 | Drive Group-Pump | 1 |
114-9966 Drive Gp-Pump
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 07***82 | Seal | 1 |
| 07***06 | Coupling | 2 |
187-8713 Drive Gp-Pump
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 07***06 | Coupling | 2 |
| 07***13 | Sleeve | 1 |
4w-5428 Drive Gp-Water Pump
| 03***75 | V-Belt; (Pump Drive)(Water) | 1 |
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
7c-6998 Drive Gp-Water Pump
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
| 11***38 | Pulley As-Idler | 1 |
9y-2755 Flywheel Gp
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
2w-8475 Gear Gp-Front
| 2W***65 | Shaft-Idler | 1 |
| 2W***66 | Bearing-Sleeve | 1 |
| 2W***75 | Gear Group-Front; Front Gear Group | 1 |
101-4540 Gear Gp-Front
| 10***07 | Shaft-Cam Idler | 1 |
| 10***08 | Plate-Retaining | 1 |
| 10***40 | Gear Group-Front | 1 |
9y-4856 Housing Gp-Flywheel
| 1B***70 | Plug-Pipe; (Drain) | 1 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 1 |
| 2P***94 | Plug-Sealing | 1 |
7l-0002 Housing Gp-Front
| 1U***46 | Sealant (For Locations A) | 0 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 4 |
101-4539 Housing Gp-Front
| 10***39 | Housing Group-Front | 1 |
| 10***11 | Plug | 2 |
| 13***42 | Housing-Front | 1 |
4w-2515 Lifting Gp-Engine
| 4W***82 | Plate-Lifting; (Rear)(Rear) | 1 |
| 4W***83 | Plate-Lifting; (Front) | 1 |
| 4W***15 | Lifting Group | 1 |
104-7486 Mounting Gp-Engine Flexible
| 10***86 | Mounting Group-Engine Flexible | 1 |
| 10***20 | Mount As | 1 |
| 10***66 | Support As-Engine; (Lh) | 1 |
178-9389 Mounting Gp-Engine Flexible
| 10***66 | Support As-Engine; (Lh) | 1 |
| 10***67 | Support As-Engine; (Rh) | 1 |
| 11***62 | Mount As | 2 |
4w-0269 Pan Gp-Oil -Engine
| 11***77 | Pan-Oil | 1 |
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 26***16 | Gasket-Oil Pan; (Engine) | 1 |
107-7639 Piston & Rod Gp
| 10***45 | Crown As-Piston | 1 |
| 10***39 | Piston & Rod Group; Connecting Rod And Piston Group | 1 |
| 10***87 | Ring-Piston (Top-Chrome) | 1 |
4w-5429 Pulley Gp-Crankshaft
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
| 4W***29 | Pulley Group-Crankshaft; Crankshaft Pulley Group | 1 |
| 7W***73 | Pulley-Crankshaft; (1-Groove) | 1 |
9y-0757 Pulley Gp-Fan Drive
| 7C***90 | Pulley-Fan Drive | 1 |
| 8T***08 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 6 |
| 9Y***57 | Pulley Group-Fan Drive | 1 |
107-7722 Rocker Arm Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 10***91 | Seat-Wear | 1 |
| 10***76 | Rocker Arm As; (Unit Injector) | 1 |
4w-1016 Seal Gp-Crankshaft
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
| 4W***16 | Seal Group-Crankshaft | 1 |
| 7C***71 | Seal Group-Crankshaft; (Rear)(Rear) | 1 |
115-4203 Seal Gp-Crankshaft
| 11***03 | Seal Group-Crankshaft | 1 |
| 22***09 | Seal Group-Crankshaft; (Rear) | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
4p-4372 Mechanism Gp-Fuel Pump & Valve
| 10***22 | Rocker Arm Group-Valve | 6 |
| 14***47 | Arm As-Lifter | 4 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 2 |
Braking System
192-7472 Brake Gp-Parking
| 11***28 | Kit-Seal; (Final Drive Planetary) | 1 |
| 11***29 | Kit-Brake Lining; (Final Drive Planetary) | 1 |
| 12***65 | Kit-Brake Spring; (Final Drive Planetary) | 1 |
Controls
8i-0732 Adjuster Gp-Height -Manual
| 10***01 | .. Roller, Bearing | 2 |
| 10***14 | Handle | 2 |
| 10***39 | Key-Square | 4 |
122-0160 Adjuster Gp-Strike-Off
| 10***36 | Motor Group-Power Adjuster | 2 |
| 12***54 | Support As; (Rh)(Rh Motor) | 1 |
| 12***55 | Support As; (Lh)(Lh Motor) | 1 |
111-9148 Adjuster Gp-Strike-Off
| 10***01 | .. Roller, Bearing | 2 |
| 10***39 | Key-Square | 2 |
| 11***48 | Adjuster Group-Strike-Off | 1 |
119-1408 Control Gp-Thickness
| 11***08 | Control Group-Thickness | 1 |
| 11***09 | Shaft As | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
8i-0340 Control Gp-Thickness -Counterclockwise Acme
| 13***77 | Lockout | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
| 1D***20 | Nut,Plain,Hexagon Gear Mtg | 2 |
222-7157 Control Gp-Thickness -Counterclockwise
| 13***77 | Lockout | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
| 1D***20 | Nut,Plain,Hexagon Gear Mtg | 2 |
222-7158 Control Gp-Thickness -Clockwise
| 13***77 | Lockout | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
| 1D***20 | Nut,Plain,Hexagon Gear Mtg | 2 |
8i-0337 Control Gp-Thickness -Clockwise
| 13***77 | Lockout | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
| 1D***20 | Nut,Plain,Hexagon Gear Mtg | 2 |
222-7160 Control Gp-Thickness -Counterclockwise Acme
| 13***77 | Lockout | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
| 1D***20 | Nut,Plain,Hexagon Gear Mtg | 2 |
8i-0338 Control Gp-Thickness -Counterclockwise
| 13***77 | Lockout | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
| 1D***20 | Nut,Plain,Hexagon Gear Mtg | 2 |
8i-0339 Control Gp-Thickness -Clockwise Acme
| 13***77 | Lockout | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
| 1D***20 | Nut,Plain,Hexagon Gear Mtg | 2 |
8i-0734 Crown Gp-Manual
| 10***14 | Handle | 1 |
| 10***28 | Shaft As-Adjustment | 1 |
| 13***77 | Lockout | 1 |
185-4044 Jack Gp-Height Adjuster
| 18***65 | Jack Group-Height Adjuster | 1 |
| 18***44 | Jack Group-Height Adjuster | 1 |
| 1F***50 | Nut Rops Support | 1 |
196-2503 Jack Gp-Height Adjuster
| 10***64 | Bearing-Thrust | 2 |
| 11***49 | Worm | 1 |
| 19***03 | Jack Group-Height Adjuster | 1 |
109-0336 Motor Gp-Power Adjuster
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Pin-Grooved | 1 |
| 10***73 | Gasket | 1 |
8i-0730 Sloper Gp-Manual
| 10***14 | Handle | 2 |
| 13***77 | Lockout | 2 |
| 2D***35 | Locknut (Visor To Bracket) | 2 |
Cooling System
7c-5467 Adapter Gp-Fan
| 6I***37 | Adapter; (Fan) | 1 |
| 7C***67 | Adapter Group-Fan | 1 |
| 8T***77 | Bolt-Plt; (M8 X 1.25 X 90) | 6 |
100-6269 Cooler Gp-Engine Oil
| 10***69 | Cooler Group-Engine Oil | 1 |
| 23***55 | Gasket | 1 |
| 26***43 | Core As-Engine Oil Cooler | 1 |
4w-2913 Cooler Gp-Engine Oil
| 23***54 | Gasket | 1 |
| 23***55 | Gasket | 1 |
| 24***64 | Spring; (Yoke) | 1 |
104-7485 Cooling Gp-Supplemental
| 10***85 | Cooling Group-Supplemental | 1 |
| 10***76 | Hose-Upper; (Radiator)(Radiator) | 1 |
| 11***28 | Hose-Lower; (Radiator)(Radiator) | 1 |
7c-9048 Lines Gp-Water
| 12***47 | Housing-Water Regulating | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 12***71 | Clamp-Hose | 2 |
4w-7589 Pump Gp-Water
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
| 4J***24 | Seal 46.99 mm(1.85 In.) I.D. | 1 |
| 4W***89 | Pump Group-Water | 1 |
7c-6438 Pump Gp-Water
| 15***42 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
7c-4508 Pump Gp-Water
| 15***37 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
7c-7030 Pump Gp-Water
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
| 4J***24 | Seal 46.99 mm(1.85 In.) I.D. | 1 |
| 7C***38 | Pump Group-Water | 1 |
159-3137 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 15***37 | Pump Group-Water | 1 |
159-3142 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 15***42 | Pump Group-Water | 1 |
171-9705 Radiator Gp
| 03***64 | Cap As-Radiator; (7-Psi) | 1 |
| 17***05 | Radiator Group | 1 |
| 18***36 | Shroud | 1 |
Electrical And Starting System
244-1090 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 24***90 | Alarm Group; -Backup | 1 |
9w-3043 Alternator Gp-Charging
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 5 |
| 10***63 | Regulator As-Alternator; (24-Volt) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
9y-8187 Alternator Gp-Charging
| 4N***05 | Spacer; (0.42x0.75x0.6-In Thk) | 1 |
| 7C***63 | Bracket-Alternator | 1 |
| 7C***29 | Pulley-Alternator | 1 |
104-7451 Battery Gp
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 2 |
| 10***51 | Battery Group | 1 |
| 11***75 | Cable As | 1 |
175-7736 Box Gp-Junction
| 17***82 | Film-Warning; (High Voltage) | 1 |
| 17***83 | Film-Identification; (Electrical Outlet) | 1 |
| 17***36 | Box Group-Junction | 1 |
110-6825 Box Gp-Junction
| 03***38 | Screw; (6-32x1.0in) | 2 |
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 10***84 | Relay As; (24-Volt) | 1 |
154-9599 Box Gp-Junction
| 03***38 | Screw; (6-32x1.0in) | 4 |
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 6 |
175-7737 Box Gp-Junction
| 17***82 | Film-Warning; (High Voltage) | 1 |
| 17***83 | Film-Identification; (Electrical Outlet) | 1 |
| 17***37 | Box Group-Junction | 1 |
122-9303 Buffer Gp-Sensor -Material Height
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
122-9309 Buffer Gp-Sensor -5000-Hz Pwm
| 12***09 | Buffer Group-Sensor; -5000-Hz Pwm-Conveyor Speed | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
145-0891 Circuit Breaker & Relay Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 2 |
| 13***25 | Plate-Mounting | 1 |
154-9616 Circuit Breaker & Relay Gp
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
151-6257 Control Gp-Conveyor Electronic -Auger
| 14***19 | Sensor Group-Auger | 1 |
| 14***36 | Film-Identification; (Service Codes) | 1 |
| 15***57 | Control Group-Conveyor Electronic; -Auger | 1 |
133-3765 Control Gp-Conveyor Electronic
| 13***65 | Control Group-Conveyor Electronic | 1 |
116-6215 Control Gp-Conveyor Electronic
| 11***15 | Control Group-Conveyor Electronic | 1 |
171-7043 Control Gp-Manual Override
| 10***35 | Wire As | 3 |
| 11***68 | Wire As | 3 |
| 12***97 | Wire As | 1 |
117-5034 Control Gp-Manual Override
| 10***35 | Wire As | 3 |
| 11***91 | Resistor As | 1 |
| 11***34 | Control Group-Manual Override | 1 |
116-6223 Control Gp-Propel Electronic
| 11***23 | Control Group-Propel Electronic | 1 |
164-7359 Cover Gp-Wiring Harness
| 16***59 | Cover Group-Wiring Harness | 1 |
| 17***96 | Bracket-Mounting | 1 |
| 17***97 | Flange | 1 |
155-2651 Distributor Gp-Electronic
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***51 | Distributor Group-Electronic | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
104-7440 Electrical Ar
| 10***40 | Electrical Ar | 1 |
| 10***50 | Installation Group-Controls | 1 |
| 10***51 | Battery Group | 1 |
226-2401 Generator & Mtg Gp-Hydraulic -8 Kilowatts
| 08***56 | Nut | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***50 | Sleeve; (32-cm) | 0 |
226-2400 Generator & Mtg Gp-Hydraulic -6 Kilowatts
| 08***56 | Nut | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***50 | Sleeve; (32-cm) | 0 |
179-8207 Generator Gp-Hydraulic -8 Kilowatt
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 08***56 | Nut | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
166-4141 Generator Gp-Hydraulic -6 Kilowatt
| 16***41 | Generator Group-Hydraulic; -6 Kilowatt | 1 |
| 17***42 | Ring-Slip | 1 |
| 17***43 | Rotor | 1 |
219-6308 Generator Gp-Hydraulic -6 Kilowatt
| 17***44 | Fan | 1 |
| 17***45 | Support | 2 |
| 17***46 | Brush | 6 |
179-8206 Generator Gp-Hydraulic -6 Kilowatt
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 08***56 | Nut | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
219-6313 Generator Gp-Hydraulic -8 Kilowatt
| 17***44 | Fan | 1 |
| 17***45 | Support | 2 |
| 17***46 | Brush | 6 |
160-4233 Generator Gp-Hydraulic -8 Kilowatt
| 16***33 | Generator Group-Hydraulic; -8 Kilowatt | 1 |
| 17***42 | Ring-Slip | 1 |
| 17***44 | Fan | 1 |
194-6509 Harness As-Sensor -Engine Oil
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***09 | Harness As-Sensor; -Engine Oil | 1 |
158-8051 Harness As-Valve -Tow Point
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 15***51 | Harness As-Valve; -Tow Point | 1 |
104-7450 Installation Gp-Controls
| 10***00 | Kit-Connecting Plug; (12-Pin)(Electronic Control) | 14 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
166-2055 Installation Gp-Generator
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 6 |
| 08***56 | Nut | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
166-6282 Installation Gp-Generator
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 6 |
| 08***56 | Nut | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
116-8711 Lamp Gp-Warning Beacon
| 03***14 | Screw; (10-32x1-In) | 3 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 11***11 | Lamp Group-Warning Beacon | 1 |
128-6983 Lamp Gp-Warning Beacon -Rotating
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***83 | Lamp Group-Warning Beacon; -Rotating, Amber | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
9x-9556 Lamp Gp-Warning Beacon
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 3 |
| 6V***25 | Nut-Hard; (M6 X 1.0) | 3 |
116-8703 Lighting Gp-Flood
| 10***99 | Harness As-Lighting; (Floodlights)(Rear) | 4 |
| 10***29 | Plate | 2 |
| 11***03 | Lighting Group-Flood | 1 |
106-6610 Motor Gp-Electric
| 09***47 | Brush As | 1 |
| 10***10 | Motor Group-Electric | 1 |
| 11***94 | Bell; (Rear) | 1 |
170-7071 Motor Gp-Electric
| 09***47 | Brush As | 1 |
| 11***94 | Bell; (Rear) | 1 |
| 11***61 | Bearing | 2 |
145-8519 Sensor Gp-Auger
| 11***24 | Clamp | 2 |
| 14***19 | Sensor Group-Auger | 1 |
| 16***41 | Support-Sensor | 2 |
168-7855 Sensor Gp-Feeder
| 11***07 | Knob | 2 |
| 12***44 | Paddle As | 2 |
| 16***91 | Block As-Mounting; (Position Sensor) | 2 |
118-3465 Sensor Gp-Feeder
| 11***22 | Block As-Mounting | 2 |
| 11***07 | Knob | 2 |
| 11***65 | Sensor Group-Feeder | 1 |
168-3551 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***51 | Sensor Group-Position; -Steering | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
284-8876 Sensor Gp-Position
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 28***76 | Sensor Group-Position | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
214-4863 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
| 21***63 | Sensor Group-Position; -Rotary-Tc Impeller Clutch, Lh Pedal | 1 |
147-1680 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***80 | Sensor Group-Position; -Direction, Speed-Steering Pedal, Rh, Lh-Center Pedal | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
219-2385 Sensor Gp-Position
| 12***50 | Receptacle As | 1 |
| 12***51 | Bushing | 1 |
| 12***52 | Clamp As-Cable | 1 |
121-7386 Sensor Gp-Position
| 12***86 | Sensor Group-Position | 1 |
| 12***50 | Receptacle As | 0 |
| 12***52 | Clamp As-Cable | 0 |
9x-5592 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 9X***92 | Sensor Group-Position; -Direction, Speed-Steering Pedal, Rh, Lh-Center Pedal | 1 |
118-6240 Sensor Gp-Speed -Propel
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***40 | Sensor Group-Speed; -Propel | 1 |
| 16***09 | Nut-Special | 1 |
189-5746 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***49 | Strap; (Marker) | 1 |
7c-9458 Solenoid Gp-Shutoff
| 12***72 | Solenoid As; (Fuel Shutoff) | 1 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 1 |
| 6V***77 | Nut (8-32 Thd) | 2 |
134-2356 Starting Aid Gp -Air Inlet Heater
| 10***52 | Heater As; (22-Volt, 2160-Watt)(Air Inlet) | 1 |
| 10***47 | Strap-Grounding | 1 |
| 12***79 | Stud-Taperlock; (M8x1.25x130-mm) | 1 |
102-8823 Starting Aid Gp
| 10***58 | Cover-Inlet Manifold | 1 |
| 10***62 | Elbow | 1 |
| 10***23 | Starting Aid Group; (Heater) | 1 |
106-9086 Starting Aid Gp
| 10***86 | Starting Aid Group; (Heater) | 1 |
| 10***52 | Heater As; (22-Volt, 2160-Watt)(Air Inlet) | 1 |
| 10***46 | Hose | 1 |
104-7040 Starting Motor Gp-Electric
| 10***40 | Starting Motor Group-Electric | 1 |
| 10***57 | Starting Motor Group-Electric; Electric Starting Motor Group (Robert Bosch) | 1 |
| 6V***20 | Starting Motor Group-Electric; (Electric) | 1 |
108-3858 Starting Motor Gp-Electric
| 10***40 | Starting Motor Group-Electric | 1 |
| 10***58 | Starting Motor Group-Electric | 1 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
106-8559 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
207-1511 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
6v-5720 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
106-8558 Starting Motor Gp-Electric
| 10***58 | Starting Motor Group-Electric | 1 |
| 10***59 | Starting Motor Group-Electric; Electric Starting Motor Group (Delco Remy) | 1 |
207-1517 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
106-8557 Starting Motor Gp-Electric
| 10***57 | Starting Motor Group-Electric; Electric Starting Motor Group (Robert Bosch) | 1 |
| 7X***62 | Washer-Hard; (13.5x19x0.8-mm Thk) | 3 |
| 8F***34 | Lockwasher; (External Teeth) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
123-2993 Switch Gp-Liquid Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***93 | Switch Group-Liquid Level; -Engine Oil-Ster, Fan Dr Oil (Engine On)-Torque Converter Oil-Torque Conv Oil (Low, Cold)-Front, Rear Engine Oil-Steering Oil, Engine Off-Torque Conv Oil (Low, Hot)-Auxiliary Coolant-Brake Oil, Hoist-Engine Coolant | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
172-8660 Switch Gp-Liquid Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
187-6531 Wiring Gp-Engine
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
145-3390 Wiring Gp-Engine
| 11***66 | Mount | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 14***91 | Circuit Breaker & Relay Group | 1 |
148-3040 Wiring Gp-Engine
| 11***18 | Clip | 2 |
| 11***66 | Mount | 1 |
| 14***40 | Wiring Group-Engine | 1 |
132-4802 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 2 |
| 13***25 | Plate-Mounting | 1 |
134-2627 Wiring Gp-Engine
| 11***66 | Mount | 1 |
| 13***02 | Wiring Group-Engine | 1 |
| 13***27 | Wiring Group-Engine | 1 |
104-7452 Wiring Gp-Hydraulic Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***62 | Screw-Machine; (4-40x0.63-In) | 4 |
| 10***52 | Wiring Group-Hydraulic Control | 1 |
197-9828 Wiring Gp-Screed
| 19***98 | Panel Group-Electronic; -Material Height-Rh | 1 |
| 19***99 | Panel Group-Electronic; -Material Height-Lh | 1 |
| 19***28 | Wiring Group-Screed | 1 |
Electrical System
196-1298 Panel Gp-Electronic -Material Height-Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***83 | Relay-Time Delay; (Electric Heat) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
196-1299 Panel Gp-Electronic -Material Height-Lh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 13***48 | Potentiometer As; (Rh Conveyor Speed Dial) | 1 |
Engine Arrangement
105-4765 Engine Ar
| 10***83 | Air Cleaner Group | 1 |
| 10***84 | Exhaust Group | 1 |
| 10***85 | Cooling Group-Supplemental | 1 |
143-0457 Engine Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
| 10***56 | Sender As-Pressure; (Oil) | 1 |
133-4245 Engine Ar
| 10***69 | Cooler Group-Engine Oil | 1 |
| 10***39 | Housing Group-Front | 1 |
| 10***40 | Gear Group-Front | 1 |
178-9390 Engine Ar
| 10***85 | Cooling Group-Supplemental | 1 |
| 10***78 | Drive Group-Pump | 1 |
| 14***57 | Engine Ar | 1 |
159-5999 Engine Ar
| 10***69 | Cooler Group-Engine Oil | 1 |
| 10***39 | Housing Group-Front | 1 |
| 10***40 | Gear Group-Front | 1 |
105-4404 Engine Ar
| 10***23 | Starting Aid Group; (Heater) | 1 |
| 10***03 | Filler Group-Engine Oil | 1 |
| 10***63 | Cover Group-Cylinder Block | 1 |
105-4766 Engine Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
| 10***04 | Engine Ar | 1 |
Feeder Drag And Auger Conveyors
169-0899 Auger Gp
| 10***79 | Pin | 2 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
| 15***28 | Hose As | 2 |
116-9509 Bearing Gp-Auger
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***09 | Bearing Group-Auger | 1 |
201-5584 Bearing Gp-Auger
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
| 20***84 | Bearing Group-Auger | 1 |
106-9717 Bearing Gp-Auger
| 10***17 | Bearing Group-Auger | 1 |
| 11***94 | Bearing-Insert | 1 |
| 19***77 | Shield | 1 |
106-9718 Bearing Gp-Auger
| 01***41 | Setscrew-Socket | 3 |
| 10***18 | Bearing Group-Auger | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
105-9278 Chain Gp-Conveyor -Rh
| 10***78 | Chain Group-Conveyor; -Rh | 1 |
| 8I***14 | Bar-Side | 58 |
| 8I***15 | Bar-Side | 29 |
107-5892 Chain Gp-Conveyor
| 10***78 | Chain Group-Conveyor; -Rh | 1 |
| 10***92 | Chain Group-Conveyor | 1 |
| 13***56 | Chain Group-Conveyor; -Lh | 1 |
134-3956 Chain Gp-Conveyor -Lh
| 13***56 | Chain Group-Conveyor; -Lh | 1 |
| 8I***14 | Bar-Side | 58 |
| 8I***15 | Bar-Side | 29 |
104-7444 Conveyor Ar-Drag & Auger
| 10***44 | Conveyor Ar-Drag & Auger | 1 |
| 10***74 | Conveyor Group-Drag | 2 |
| 10***77 | Footshaft Group | 2 |
137-5514 Conveyor Gp-Auger
| 06***66 | Bolt; (3/4-10x1.642-In) | 12 |
| 07***87 | Ring-Retaining | 4 |
| 10***53 | Bar | 2 |
104-7475 Conveyor Gp-Auger
| 03***36 | Washer | 2 |
| 06***66 | Bolt; (3/4-10x1.642-In) | 12 |
| 07***87 | Ring-Retaining | 4 |
230-1539 Conveyor Gp-Auger
| 06***66 | Bolt; (3/4-10x1.642-In) | 6 |
| 10***55 | Plate | 1 |
| 10***57 | Slide As | 1 |
104-7474 Conveyor Gp-Drag
| 05***20 | Pin-Spring | 58 |
| 10***74 | Conveyor Group-Drag | 1 |
| 10***92 | Chain Group-Conveyor | 1 |
8i-0852 Drive Gp-Conveyor -Drag Conveyor
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 08***43 | Gear-Cluster | 3 |
8i-0866 Drive Gp-Conveyor
| 08***44 | Gear-Input | 1 |
| 08***83 | Washer; (Thrust) | 1 |
| 09***78 | Pin-Spring | 3 |
185-0787 Drive Gp-Conveyor -Auger Conveyor
| 08***41 | Carrier As | 1 |
| 08***44 | Gear-Input | 1 |
| 08***83 | Washer; (Thrust) | 1 |
5e-9825 Extension Gp-Auger -2-Ft, Lh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 5E***25 | Extension Group-Auger; -2-Ft, Lh | 1 |
5e-9808 Extension Gp-Auger -1-Ft, Lh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 5E***08 | Extension Group-Auger; -1-Ft, Lh | 1 |
5e-9826 Extension Gp-Auger -2-Ft, Rh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 5E***26 | Extension Group-Auger; -2-Ft, Rh | 1 |
5e-9809 Extension Gp-Auger -1-Ft, Rh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 5E***09 | Extension Group-Auger; -1-Ft, Rh | 1 |
1g-9347 Extension Gp-Auger -6 In
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 1G***48 | Tube | 2 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 2 |
104-7477 Footshaft Gp
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
104-7479 Guard Gp-Feeder
| 03***82 | Screw; (3/8-16x2-In) | 12 |
| 10***79 | Guard Group-Feeder | 1 |
| 10***41 | Plate | 4 |
129-3007 Guard Gp-Feeder
| 03***82 | Screw; (3/8-16x2-In) | 12 |
| 10***41 | Plate | 2 |
| 10***42 | Plate | 2 |
104-7458 Lubrication Gp-Feeder
| 10***58 | Lubrication Group-Feeder | 1 |
| 10***99 | Tube As | 1 |
| 10***01 | Tube As | 1 |
228-4458 Shaft Gp-Feeder Drive
| 03***21 | Bolt-Allen Hd; (3/8unc X 1) | 4 |
| 10***30 | Bearing-Flange | 1 |
| 10***70 | Key-Square | 1 |
129-4584 Shaft Gp-Feeder Drive
| 03***21 | Bolt-Allen Hd; (3/8unc X 1) | 4 |
| 10***30 | Bearing-Flange | 1 |
| 10***70 | Key-Square | 1 |
Frame And Body
104-7467 Arm Gp-Tow
| 03***83 | Spacer | 16 |
| 03***53 | Ring-Retaining | 2 |
| 05***74 | Pin | 2 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
109-2722 Bracket Gp-Support
| 06***66 | Bolt; (3/4-10x1.642-In) | 2 |
| 10***22 | Bracket Group-Support | 1 |
| 11***52 | Plate | 1 |
135-5256 Cover Gp-Engine & Platform
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 8 |
| 03***72 | Bolt; (3/8-16-Thd) | 11 |
| 10***03 | Panel; (N.S.) | 2 |
104-7466 Cover Gp-Engine & Platform
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 8 |
| 03***72 | Bolt; (3/8-16-Thd) | 9 |
| 10***03 | Panel; (N.S.) | 2 |
143-0455 Cover Gp-Engine & Platform
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 8 |
| 03***72 | Bolt; (3/8-16-Thd) | 11 |
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
171-5926 Cover Gp-Engine & Platform
| 17***45 | Panel | 1 |
| 17***47 | Cover As-Louver | 1 |
| 17***26 | Cover Group-Engine & Platform | 1 |
217-0588 Cover Gp-Platform
| 10***56 | Rod; (Prop) | 1 |
| 14***41 | Shim; (6-mm Thk)(6 mm Thk) | 1 |
| 14***57 | Shim; (2-mm Thk)(2 mm Thk) | 1 |
147-6567 Cover Gp-Platform
| 11***62 | Washer | 4 |
| 14***67 | Cover Group-Platform | 1 |
| 14***47 | Plate-Cover | 1 |
110-1530 Deflector Gp
| 11***30 | Deflector Group | 1 |
| 12***50 | Plate | 1 |
| 12***51 | Plate | 1 |
106-9714 Extension Gp-Main Frame -1 Ft
| 10***14 | Extension Group-Main Frame; -1 Ft | 1 |
| 10***88 | Extension As | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 3 |
215-7553 Extension Gp-Main Frame
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
106-9715 Extension Gp-Main Frame -2 Ft
| 10***15 | Extension Group-Main Frame; -2 Ft | 1 |
| 10***90 | Extension As | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 3 |
116-9510 Extension Gp-Main Frame
| 11***10 | Extension Group-Main Frame | 1 |
| 12***73 | Extension As | 2 |
| 12***78 | Bar | 2 |
104-7464 Frame As
| 10***64 | Frame As | 1 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 4 |
| 11***52 | Frame As | 1 |
222-0884 Frame As
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 4 |
| 16***87 | Tube | 6 |
| 17***80 | Bar | 4 |
168-0232 Guard Gp-Deflector
| 16***99 | Guard; (Lh) | 1 |
| 16***00 | Guard; (Rh) | 1 |
| 16***09 | Deflector | 1 |
104-6579 Guide Gp-Steering
| 03***74 | Keeper | 1 |
| 10***79 | Guide Group-Steering | 1 |
| 10***39 | Tube As | 1 |
135-0494 Hopper Gp
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 4 |
| 10***49 | Pin As | 2 |
| 10***20 | Bar | 1 |
169-9539 Hopper Gp
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 10***15 | Apron As | 2 |
105-4763 Hopper Gp
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 4 |
| 0S***49 | Stud (2" Long) | 4 |
| 10***48 | Pin As | 2 |
150-0032 Installation Ar-Ventilation
| 14***28 | Ventilation Group-Paver | 1 |
| 14***16 | Lines Group-Paver Ventilation | 1 |
| 15***32 | Installation Ar-Ventilation | 1 |
173-7690 Kit-Hopper
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 16***85 | Pin As | 2 |
| 16***86 | Tube | 8 |
177-4286 Lines Gp-Grease
| 10***01 | Tube As | 1 |
| 10***03 | Tube As | 2 |
| 10***04 | Tube As | 1 |
173-2661 Plate Gp
| 17***61 | Plate Group | 1 |
118-7295 Step Gp
| 11***15 | Step As | 1 |
| 11***34 | Bracket As; (Rh) | 1 |
| 11***03 | Bracket As; (Lh) | 1 |
104-7442 Structural Ar
| 10***79 | Guide Group-Steering | 1 |
| 10***42 | Structural Ar | 1 |
| 10***64 | Frame As | 1 |
169-5471 Support Gp-Frame
| 10***89 | Brace Group | 1 |
| 10***22 | Bracket Group-Support | 1 |
| 16***71 | Support Group-Frame | 1 |
104-7468 Support Gp-Tow Arm
| 06***35 | Lock Pin | 2 |
| 10***68 | Support Group-Tow Arm | 1 |
| 10***37 | Lever As | 1 |
142-0336 Suppression Gp-Sound
| 10***64 | Foam | 2 |
| 10***65 | Foam | 2 |
| 10***66 | Foam | 4 |
173-2020 Suppression Gp-Sound
| 10***66 | Foam | 4 |
| 11***62 | Washer | 3 |
| 14***07 | Nail | 16 |
109-4205 Suppression Gp-Sound
106-9681 Tube As -Ski Tow
| 10***81 | Tube As; -Ski Tow | 1 |
147-6555 Ventilation Gp-Paver
| 10***39 | Key-Square | 1 |
| 11***62 | Washer | 5 |
| 14***00 | Inlet-Blower | 1 |
146-7628 Ventilation Gp-Paver
| 11***62 | Washer | 5 |
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
Fuel System
129-1102 Base Gp-Fuel Filter
| 11***23 | Insert-Fuel Filter | 1 |
| 12***01 | Valve Group-Check; -Fuel-Fuel Filter | 1 |
| 12***02 | Base Group-Fuel Filter | 1 |
7w-6989 Control Gp-Fuel Injection
| 16***56 | Control Group-Fuel Injection | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 4 |
| 7W***89 | Control Group-Fuel Injection; Fuel Injection Control Group | 1 |
105-1695 Control Gp-Fuel Injection
| 10***95 | Control Group-Fuel Injection | 1 |
| 16***56 | Control Group-Fuel Injection | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 4 |
7e-9429 Control Gp-Governor
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 1 |
| 6I***82 | Lever As | 1 |
| 6I***83 | Spring | 2 |
7e-8794 Drive Gp-Gov & Transfer Pump
| 10***68 | Gear As-Drive; (44-Teeth), . Body | 1 |
| 10***85 | Lever-Shutoff; (Output) | 1 |
| 1W***65 | Ring-Retaining | 1 |
7w-4812 Fastener Gp-Fuel Inj Pump
| 1T***68 | Seal-O-Ring; (Fuel Injection Pump) | 1 |
| 6F***73 | Seal--To Top Cover On Selector Valve | 1 |
| 6V***18 | Bolt (M8x1.25x45mm); (M8x1.25x35-mm) | 3 |
6i-2693 Filter Gp-Fuel
| 1R***51 | Filter-Fuel; (Advanced Efficiency)(High Efficiency) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6I***93 | Filter Group-Fuel; Fuel Filter Group (2z F3772-Up) | 1 |
9y-0283 Fitting Gp-Fuel Lines
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
| 5P***24 | Elbow-90 Degree | 2 |
| 9Y***83 | Fitting Group-Fuel Lines | 1 |
6i-4267 Governor Gp-Unit Injector
| 10***12 | Clevis | 1 |
| 10***13 | Piston-Servo | 1 |
| 11***03 | Lever Assem. | 1 |
110-2397 Governor Gp-Unit Injector
| 11***26 | Governor Group-Unit Injector | 1 |
| 11***97 | Governor Group-Unit Injector | 1 |
| 7W***12 | Fastener Group-Governor; Fastener Group(Governor) (~1c K5811) | 1 |
110-2326 Governor Gp-Unit Injector
| 11***26 | Governor Group-Unit Injector | 1 |
| 13***23 | Governor Group-Unit Injector | 1 |
| 4P***41 | Cam-Torque | 1 |
129-1213 Governor Gp-Unit Injector
| 12***13 | Governor Group-Unit Injector | 1 |
| 13***99 | Governor Group-Unit Injector | 1 |
| 7W***12 | Fastener Group-Governor; Fastener Group(Governor) (~1c K5811) | 1 |
130-7323 Governor Gp-Unit Injector
| 10***12 | Clevis | 1 |
| 10***13 | Piston-Servo | 1 |
| 10***87 | Ring-Tolerance | 1 |
131-7899 Governor Gp-Unit Injector
| 13***23 | Governor Group-Unit Injector | 1 |
| 13***89 | Cam-Torque | 1 |
| 13***99 | Governor Group-Unit Injector | 1 |
9y-3943 Lines Gp-Fuel Ratio Control
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 1 |
149-1350 Lines Gp-Fuel Filter
| 00***64 | End; (Hose) | 2 |
| 09***61 | Strap; (Cable) | 1 |
| 10***29 | Hose; (60-cm) | 0 |
6i-2420 Lines Gp-Fuel Filter
| 06***26 | Cap-Tube | 1 |
| 11***84 | Tee-O-Ring Port | 1 |
| 11***33 | Tube As | 1 |
7w-8434 Lines Gp-Governor Oil
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 2 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 2 |
| 6V***28 | Elbow-Face Seal (For 6.35mm Od Tube) | 1 |
192-4302 Pump Gp-Fuel
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
| 13***76 | Strainer; (Fuel Pump) | 1 |
1g-7988 Pump Gp-Fuel
| 10***60 | Plug | 1 |
| 1G***88 | Pump Group-Fuel | 1 |
| 5E***40 | Plug-By-Pass | 1 |
137-2525 Pump Gp-Fuel
| 13***25 | Pump Group-Fuel | 1 |
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
107-7732 Pump Gp-Fuel Injection
| 10***32 | Pump Group-Fuel Injection | 1 |
| 11***18 | Seal-O-Ring; (26.64mm Id) | 1 |
| 12***74 | Seal-O-Ring; (7.59mm'Id) | 1 |
7e-7607 Pump Gp-Unit Injection
| 10***30 | Injector Group-Fuel | 1 |
| 11***18 | Seal-O-Ring; (26.64mm Id) | 1 |
| 12***74 | Seal-O-Ring; (7.59mm'Id) | 1 |
8n-6201 Pump Gp-Fuel Prm & Prim Filter
| 1L***69 | Ring-Retaining | 1 |
| 2H***29 | Ring - Retaining External | 1 |
| 2J***57 | Packing,Preformed Screw Assembly Part Of Kit P/N 5r***25 | 1 |
8n-6200 Pump Gp-Fuel Priming
| 13***41 | Pump Group-Fuel Priming; (Hand) | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
| 1P***36 | Gasket; (Fuel Priming Pump)(Fuel Priming Pump) | 1 |
159-7574 Pump Gp-Fuel Prm & Prim Filter
| 14***83 | Separator Group-Water | 1 |
| 15***74 | Pump Group-Fuel Prm & Prim Filter | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 4 |
7e-7604 Pump Gp-Fuel Prm & Prim Filter
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
4p-7206 Pump Gp-Fuel Prm & Prim Filter
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
| 1H***71 | Seal 20.22 mm(.796 In.)I. D. | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
149-5380 Pump Gp-Fuel Transfer
| 08***68 | Spacer | 1 |
| 14***80 | Pump Group-Fuel Transfer | 1 |
| 17***71 | Motor Group-Electric; -Fuel Transfer Pump | 1 |
149-2683 Separator Gp-Water
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
106-6608 Tank & Pump Gp-Fuel
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 08***68 | Spacer | 1 |
| 10***14 | Tank As-Fuel | 1 |
143-0460 Tank & Pump Gp-Fuel
| 10***49 | Plate | 2 |
| 11***68 | Hose As | 1 |
| 11***72 | Filter Group-Fuel; (Fuel) | 1 |
174-6314 Tank Gp-Fuel
| 16***28 | Hose As | 1 |
| 16***29 | Hose As | 1 |
| 16***29 | Tank As-Fuel | 1 |
158-6216 Tank Gp-Fuel
| 15***95 | Tank As-Fuel | 1 |
| 15***42 | Coupling-Half | 1 |
| 15***93 | Hose As | 1 |
129-1101 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 12***01 | Valve Group-Check; -Fuel-Fuel Filter | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
141-8288 Valve Gp-Fuel Relief
| 14***87 | Spring | 1 |
| 14***88 | Valve Group-Fuel Relief | 1 |
| 2W***94 | Plunger As-Valve | 1 |
Grade References
109-5624 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5622 Leveler Gp -40-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5625 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 7 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5627 Leveler Gp -40-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5623 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5626 Leveler Gp -Outboard
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5628 Leveler Gp -30-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
Hydraulic System
077-3951 Cap Gp-Hydraulic Oil Filler
| 07***51 | Cap As-Filler Breather | 1 |
| 07***32 | Filter Element-Breather; (Hydraulic Oil Filter) | 1 |
| 07***26 | Gasket | 2 |
141-7578 Cooler Gp-Hydraulic Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 13***69 | Mounting Group-Hydraulic Oil Cooler | 2 |
172-9252 Cooler Gp-Hydraulic Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 13***69 | Mounting Group-Hydraulic Oil Cooler | 2 |
104-7462 Cooler Gp-Hydraulic Oil
| 08***56 | Nut | 2 |
| 10***62 | Cooler Group-Hydraulic Oil | 1 |
| 12***47 | Hose As | 1 |
135-0220 Cylinder Gp-Hydraulic -Hopper
| 13***20 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 13***21 | Kit-Seal; (Hopper Cylinder) | 1 |
| 5E***32 | Ring | 1 |
203-4274 Cylinder Gp-Hydraulic -Screed Hoist
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 20***74 | Cylinder Group-Hydraulic; -Screed Hoist | 1 |
| 23***05 | Kit-Seal; (Screed Hoist Cylinder) | 1 |
203-4275 Cylinder Gp-Hydraulic -Auger Hoist, Rh
| 20***75 | Cylinder Group-Hydraulic; -Auger Hoist, Rh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 24***14 | Kit-Seal; (Auger Hoist) | 1 |
174-3072 Cylinder Gp-Hydraulic -Auger, Rh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 07***85 | Washer | 1 |
| 11***60 | Shim; (3-mm Thk) | 1 |
135-9444 Cylinder Gp-Hydraulic -Tow Point
| 13***44 | Cylinder Group-Hydraulic; -Tow Point | 1 |
| 17***34 | Kit-Seal; (Towpoint Cylinder) | 1 |
| 17***36 | Ring-Wear | 1 |
107-0473 Cylinder Gp-Hydraulic
| 03***39 | Ring-Back-Up | 1 |
| 09***29 | Lockwire | 1 |
| 10***73 | Cylinder Group-Hydraulic | 1 |
133-0959 Cylinder Gp-Hydraulic
| 03***39 | Ring-Back-Up | 1 |
| 09***29 | Lockwire | 1 |
| 11***11 | Kit-Seal | 1 |
241-1022 Cylinder Gp-Hydraulic
| 24***22 | Cylinder Group-Hydraulic | 1 |
| 24***11 | Ring-Retaining | 1 |
| 25***75 | Kit-Seal; (Auger Hoist) | 1 |
121-0412 Cylinder Gp-Hydraulic
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 08***25 | Ring; (Backup) | 1 |
| 08***23 | Seal | 1 |
8i-0938 Cylinder Gp-Hydraulic
| 10***52 | Seal-Wiper | 1 |
| 10***53 | Plug-Nylon | 1 |
| 11***46 | Ring | 1 |
8i-0992 Cylinder Gp-Hydraulic
| 03***39 | Ring-Back-Up | 1 |
| 10***51 | Seal-Polypak | 1 |
| 10***52 | Seal-Wiper | 1 |
8c-9493 Cylinder Gp-Hydraulic -Track Tension
| 2K***68 | Locknut | 1 |
| 4B***06 | Setscrew-Socket; (1/4-20x0.25-In) | 1 |
| 4K***86 | Seal (1.114" Inside Diameter) | 1 |
203-4276 Cylinder Gp-Hydraulic -Auger Hoist, Lh
| 20***76 | Cylinder Group-Hydraulic; -Auger Hoist, Lh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 25***75 | Kit-Seal; (Auger Hoist) | 1 |
174-3073 Cylinder Gp-Hydraulic -Auger, Lh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 17***73 | Cylinder Group-Hydraulic; -Auger, Lh | 1 |
| 17***07 | Kit-Seal; (Hydraulic Cylinder) | 1 |
241-1020 Cylinder Gp-Hydraulic
| 24***73 | Ring-Retaining | 1 |
| 24***20 | Cylinder Group-Hydraulic | 1 |
| 24***14 | Kit-Seal; (Auger Hoist) | 1 |
177-0264 Filter Gp-Oil -Hydraulic, Conveyor
| 12***73 | Filter-Oil; (Standard Efficiency)(Oil) | 1 |
| 17***64 | Filter Group-Oil; -Hydraulic, Conveyor | 1 |
| 17***22 | Bowl | 1 |
123-2872 Filter Gp-Oil
| 03***36 | Seal-O-Ring | 1 |
| 11***35 | Seal-Bowl | 1 |
| 12***72 | Filter Group-Oil | 1 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 17***15 | Filter Group-Oil; -Hydraulic Tank | 1 |
7x-9958 Filter Gp-Oil
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 05***15 | Gasket | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
104-7441 Hydraulic Ar
| 10***41 | Hydraulic Ar | 1 |
| 10***55 | Lines Group-Propel | 1 |
| 10***56 | Lines Group-Conveyor | 1 |
107-0482 Lines Gp-Brake & Shift
| 08***86 | Clamp | 4 |
| 10***82 | Lines Group-Brake & Shift | 1 |
| 11***70 | Hose As | 2 |
104-7456 Lines Gp-Conveyor
| 03***92 | Seal; (126.59mm Id) | 1 |
| 03***47 | Spacer | 3 |
| 06***51 | Clamp | 2 |
228-4460 Lines Gp-Conveyor
| 03***92 | Seal; (126.59mm Id) | 1 |
| 03***47 | Spacer | 3 |
| 06***51 | Clamp | 2 |
107-0481 Lines Gp-Grade & Slope
| 10***81 | Lines Group-Grade & Slope | 1 |
| 13***04 | Hose As | 2 |
| 13***05 | Hose As | 2 |
107-0478 Lines Gp-Hopper
| 08***56 | Nut | 7 |
| 10***90 | Hose As | 2 |
| 10***41 | Hose As | 2 |
187-1758 Lines Gp-Hydraulic
| 11***80 | Hose As | 1 |
| 18***58 | Lines Group-Hydraulic | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
148-1516 Lines Gp-Paver Ventilation
| 10***39 | Key-Square | 1 |
| 14***51 | Valve-Flow Control; (Blower Motor) | 1 |
| 14***05 | Hose As | 1 |
228-6375 Lines Gp-Screed Drive
| 10***57 | Connector | 1 |
| 11***53 | Hose As | 1 |
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
107-1005 Lines Gp-Screed Drive
| 10***99 | Pump Group-Gear | 1 |
| 10***05 | Lines Group-Screed Drive | 1 |
| 10***57 | Connector | 1 |
107-0480 Lines Gp-Screed Elevation
| 10***79 | Pin | 4 |
| 10***80 | Lines Group-Screed Elevation | 1 |
| 11***55 | Hose As | 1 |
107-0483 Lines Gp-Throttle
| 08***86 | Clamp | 6 |
| 10***83 | Lines Group-Throttle | 1 |
| 10***01 | Bracket-Clevis | 1 |
107-0479 Lines Gp-Track Tension
| 08***73 | Clamp | 4 |
| 08***42 | Valve Group-Relief; -Track Tension | 2 |
| 09***51 | Hose As | 1 |
107-0484 Lines Gp-Truck Hitch
| 08***73 | Clamp | 4 |
| 10***84 | Lines Group-Truck Hitch | 1 |
| 11***61 | Tube As | 1 |
197-4575 Manifold Gp-Control -Propel
| 10***21 | Plug | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***09 | Kit-Bolt | 1 |
194-3680 Manifold Gp-Control
| 10***21 | Plug | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***09 | Kit-Bolt | 1 |
119-4360 Manifold Gp-Control
| 10***21 | Plug | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***09 | Kit-Bolt | 1 |
127-5435 Manifold Gp-Cooling
| 12***35 | Manifold Group-Cooling | 1 |
| 13***15 | Valve-Check | 2 |
| 7M***85 | Seal,Adapter,Motor Part Of Kit P/N 5r***29 | 6 |
107-0002 Manifold Gp-Suction
| 10***02 | Manifold Group-Suction | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
6r-2203 Motor Gp-Gear
| 1G***84 | Kit-Seal | 1 |
| 1G***85 | Bearing As | 2 |
| 1G***86 | Flange | 1 |
227-3031 Motor Gp-Gear -Hydraulic Generator
| 08***91 | Valve As-Check; (Hydraulic Fan Oil) | 1 |
| 12***47 | Kit-Seal; (Check Valve) | 1 |
| 13***35 | Seal-Shaft | 1 |
197-1728 Motor Gp-Gear -Blower Fan
| 16***39 | Shim; (1.75-mm Thk) | 1 |
| 19***28 | Motor Group-Gear; -Blower Fan | 1 |
| 1F***22 | Bearing (.500" Long) | 4 |
156-7026 Motor Gp-Gear
| 10***50 | Seal-Shaft | 1 |
| 10***40 | Ball Bearing | 1 |
| 10***41 | Ring-Snap | 1 |
223-0581 Motor Gp-Piston -Drag Conveyor
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
105-8882 Motor Gp-Piston -Propel
| 03***20 | Ring | 4 |
| 07***53 | Pin; (Spring) | 4 |
| 10***82 | Motor Group-Piston; -Propel | 1 |
8i-0843 Motor Gp-Piston
| 1G***74 | Piston | 7 |
| 1G***75 | Guide-Slipper | 1 |
| 1J***74 | Ring-Retaining | 2 |
240-7325 Pump & Mtg Gp-Screed Vibratory
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
| 14***44 | Connector Group | 1 |
| 14***57 | Elbow As. | 1 |
267-9475 Pump Gp-Gear -Screed
| 24***41 | Kit-Solenoid Valve; (Screed Gear Pump) | 1 |
| 26***75 | Pump Group-Gear; -Screed | 1 |
| 26***42 | Kit-Seal | 1 |
104-4199 Pump Gp-Gear
| 10***99 | Pump Group-Gear | 1 |
| 11***64 | Kit-Valve Seal | 1 |
| 13***93 | Kit-Pump Seal | 1 |
226-2451 Pump Gp-Gear -Screed
| 22***51 | Pump Group-Gear; -Screed | 1 |
| 24***29 | Kit-Seal; (Screed Gear Pump) | 1 |
| 24***41 | Kit-Solenoid Valve; (Screed Gear Pump) | 1 |
154-6613 Pump Gp-Piston -Drag Conveyor, Auger Conveyor
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 2 |
8i-0961 Pump Gp-Piston
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 1 |
105-8881 Pump Gp-Piston -Propel
| 03***04 | Key | 1 |
| 03***05 | Seal-O-Ring | 2 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
105-8880 Pump Gp-Piston -Propel
| 03***04 | Key | 1 |
| 03***05 | Seal-O-Ring | 2 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
160-5113 Pump Gp-Piston
| 00***63 | Seal-O-Ring; (55.24mm Id) | 2 |
| 03***16 | Bolt-Self Locking; (1/4unc X 3/4) | 8 |
| 10***52 | Cover-Pintle | 2 |
154-6612 Pump Gp-Piston -Drag Conveyor, Auger Conveyor
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 1 |
8i-0836 Pump Gp-Piston -Auxiliary
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 2 |
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 8 |
| 05***33 | Seal | 1 |
8i-0962 Pump Gp-Piston
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 2 |
9t-2031 Rotating Gp-Pump
| 00***83 | Ring-Snap | 1 |
| 9T***31 | Rotating Group-Pump; -Steering, Pilot | 1 |
| 9T***57 | Pin | 3 |
6e-6569 Rotating Gp-Pump
| 00***55 | Ring-Retaining | 1 |
| 3T***49 | Bolt-Socket Hd; (M6 X 1.0 X 25) | 4 |
| 6E***69 | Rotating Group-Pump; -Implement | 1 |
111-1326 Tank Gp-Hydraulic
| 00***15 | Nipple-Pipe; (59.4mm Long) | 1 |
| 07***51 | Cap As-Filler Breather | 1 |
| 10***40 | Tank As-Hydraulic | 1 |
104-8677 Tank Gp-Hydraulic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***77 | Tank Group-Hydraulic | 1 |
| 11***26 | Tank Group-Hydraulic | 1 |
134-4720 Valve Gp-Bank
| 08***80 | Case As | 4 |
| 08***83 | Body | 2 |
| 08***85 | Spring | 4 |
107-1191 Valve Gp-Control -Steering
| 10***10 | Valve-Check; (Steering) | 3 |
| 10***11 | Plug; (5/16-12 Thd) | 1 |
| 10***12 | Seal | 2 |
216-7961 Valve Gp-Control -Conveyor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***29 | Nut-Retaining | 2 |
| 10***33 | Valve-Check | 1 |
154-1424 Valve Gp-Control -Conveyor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***29 | Nut-Retaining | 2 |
| 10***33 | Valve-Check | 1 |
115-0060 Valve Gp-Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***18 | Coil | 1 |
| 10***29 | Nut-Retaining | 2 |
115-7183 Valve Gp-Control -Right Grade, Hopper
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***09 | Kit-Bolt | 2 |
| 11***83 | Valve Group-Control; -Right Grade, Hopper | 1 |
160-2451 Valve Gp-Control -Flow
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***16 | Solenoid As | 1 |
| 13***11 | Valve-Check | 1 |
169-0166 Valve Gp-Counterbalance
| 07***27 | Kit-Seal; (Counterbalance Valve) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 12***16 | Solenoid As | 2 |
132-7429 Valve Gp-Manifold
| 13***29 | Valve Group-Manifold | 1 |
| 13***92 | Valve-Solenoid | 1 |
| 13***93 | Valve-Relief | 1 |
168-8609 Valve Gp-Pressure Reducing
| 16***09 | Valve Group-Pressure Reducing; -Truck Hitch | 1 |
| 17***45 | Kit-Seal; (Pressure Reducing Valve) | 1 |
| 17***46 | Valve | 1 |
152-7576 Valve Gp-Pump Control -Conveyor
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 12***32 | Setscrew-Socket; (M8x1.25x45-mm) | 2 |
196-6988 Valve Gp-Pump Control
| 19***62 | Pin | 1 |
| 19***64 | Body | 1 |
| 19***88 | Valve Group-Pump Control | 1 |
257-5145 Valve Gp-Pump Control -Auxiliary Pump
| 25***45 | Valve Group-Pump Control; -Auxiliary Pump | 1 |
| 4J***33 | Seal Fuel Injection Pump | 1 |
| 5L***58 | Seal 14 mm(.551 In.) I. D. | 1 |
087-1442 Valve Gp-Relief -Track Tension
| 08***42 | Valve Group-Relief; -Track Tension | 1 |
| 6R***80 | Valve As; (Relief) | 1 |
| 6R***81 | Valve As; (Needle) | 1 |
4t-1860 Valve Gp-Shuttle
| 14***03 | Seal-O-Ring | 1 |
| 14***04 | Ring-Backup | 2 |
| 14***05 | Ring-Backup | 2 |
113-2691 Valve Gp-Solenoid
| 08***83 | Body | 2 |
| 08***85 | Spring | 4 |
| 08***86 | Washer | 4 |
Implements
130-2151 Extension Ar
| 10***85 | Extension Ar; -1' X 26" | 2 |
| 10***14 | Extension Group-Main Frame; -1 Ft | 2 |
| 11***10 | Extension Group-Main Frame | 1 |
105-9685 Extension Ar -1' X 26"
| 10***85 | Extension Ar; -1' X 26" | 1 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 5 |
185-5433 Extension Ar-Auger
| 18***33 | Extension Ar-Auger | 1 |
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 21***53 | Extension Group-Main Frame | 4 |
8i-0522 Extension Gp-Screed
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***22 | Plate | 1 |
| 10***32 | Bar-Spacer | 1 |
111-1370 Hitch Ar-Truck
| 11***70 | Hitch Ar-Truck | 1 |
| 13***82 | Hitch Group-Truck | 1 |
| 1D***18 | Nut-Plt-Jam; (5/8unc) | 1 |
133-8682 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
111-1368 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***28 | Arm As | 2 |
166-7677 Hitch Gp-Truck
| 14***18 | Connector As | 1 |
| 16***05 | Connector As | 1 |
| 16***76 | Hitch Group-Truck; -Oscillating | 1 |
166-7676 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
180-9348 Indicator Gp-Depth
| 17***32 | Film-Identification; (Tow Point Indicator) | 2 |
| 17***73 | Plate | 2 |
| 17***33 | Bar | 2 |
116-5903 Installation Ar-Truck Hitch
| 10***84 | Lines Group-Truck Hitch | 1 |
| 11***03 | Installation Ar-Truck Hitch | 1 |
| 16***77 | Hitch Group-Truck | 1 |
104-7872 Plate Gp-Bevel End
| 10***72 | Plate Group-Bevel End | 1 |
| 12***37 | Plate As | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
104-7656 Plate Gp-Bevel End
| 10***56 | Plate Group-Bevel End | 1 |
| 12***28 | Plate As | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
104-7873 Plate Gp-Bevel End
| 10***73 | Plate Group-Bevel End | 1 |
| 12***38 | Plate As | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
104-7654 Plate Gp-Bevel End
| 10***54 | Plate Group-Bevel End | 1 |
| 12***26 | Plate As | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
104-7874 Plate Gp-Bevel End
| 10***74 | Plate Group-Bevel End | 1 |
| 12***39 | Plate As | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
104-7653 Plate Gp-Bevel End
| 10***53 | Plate Group-Bevel End | 1 |
| 12***25 | Plate As | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
104-7871 Plate Gp-Bevel End
| 10***71 | Plate Group-Bevel End | 1 |
| 12***36 | Plate As | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
104-7655 Plate Gp-Bevel End
| 10***55 | Plate Group-Bevel End | 1 |
| 12***27 | Plate As | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
102-4646 Roller Ar-Push
| 10***46 | Roller Ar-Push | 1 |
| 11***58 | Screw; 12-Point Screw, Screw, Roller Group-Push | 1 |
| 5C***66 | Bolt (25 mm Long); (5/8-11x1-In) | 1 |
102-4643 Roller Ar-Push
| 10***43 | Roller Ar-Push | 1 |
| 10***27 | Roller Group-Push | 1 |
| 5C***66 | Bolt (25 mm Long); (5/8-11x1-In) | 1 |
118-8358 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 10 |
| 11***57 | Roller As | 1 |
| 11***58 | Screw; 12-Point Screw, Screw, Roller Group-Push | 1 |
102-5927 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 10***40 | Cover-End | 2 |
| 10***42 | Housing As-Push Roller | 1 |
104-4482 Shoe Gp-Cutoff
| 10***82 | Shoe Group-Cutoff | 1 |
| 10***82 | Shoe As-Cutoff; (1 Foot) | 1 |
| 10***88 | Shoe As-Cutoff; (2 Foot) | 1 |
Lubrication System
1n-3477 Breather Gp -Crankcase
| 1N***77 | Breather Group; Breather Group | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 5N***85 | Washer-Sealing; (Sealing) | 1 |
131-4810 Breather Gp -Crankcase
| 13***10 | Breather Group; -Crankcase | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 4P***36 | Base | 1 |
103-0803 Filler Gp-Engine Oil
| 10***03 | Filler Group-Engine Oil | 1 |
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
| 6L***09 | Seal-Rubber | 1 |
7c-0271 Filter Gp-Engine Oil
| 1R***39 | Filter As-Engine Oil; (Standard Efficiency) | 1 |
| 24***64 | Spring; (Yoke) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
4p-8183 Filter Gp-Engine Oil
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 23***54 | Gasket | 1 |
| 24***64 | Spring; (Yoke) | 2 |
7w-8420 Fumes Disposal Gp
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 1 |
| 7C***52 | Hose-Disposal; (Fumes)(Fumes) | 1 |
110-9674 Gauge Gp-Oil Level (Dipstick)
| 11***74 | Gauge Group-Oil Level (Dipstick) | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 4P***56 | Gauge-Oil Level (Dipstick) | 1 |
4w-2914 Lines Gp-Engine Oil
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
| 4W***14 | Lines Group-Engine Oil | 1 |
4p-7703 Lines Gp-Turbocharger Oil
| 11***19 | Tube As | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 1S***57 | Gasket; (Turbocharger-Oil Supply) | 1 |
1w-6030 Lines Gp-Turbocharger Oil
| 1S***57 | Gasket; (Turbocharger-Oil Supply) | 1 |
| 1W***30 | Lines Group-Turbocharger Oil | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
115-4123 Pump Gp-Engine Oil
| 10***05 | Spring | 1 |
| 11***74 | Shaft As | 1 |
| 11***16 | Shaft As-Idler | 1 |
115-4138 Pump Gp-Engine Oil
| 11***23 | Pump Group-Engine Oil | 1 |
| 11***38 | Pump Group-Engine Oil | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
200-4497 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
119-2924 Pump Gp-Engine Oil
| 10***05 | Spring | 1 |
| 11***24 | Pump Group-Engine Oil | 1 |
| 2W***77 | Body As-Oil Pump | 1 |
4w-2195 Pump Gp-Engine Oil
| 11***24 | Pump Group-Engine Oil | 1 |
| 4W***95 | Pump Group-Engine Oil; Engine Oil Pump Group | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
103-9408 Valve Gp-Fluid Sampling
| 10***08 | Valve Group-Fluid Sampling; -Coolant | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
Machine Arrangement
114-9485 Common Ar
| 10***40 | Electrical Ar | 1 |
| 10***41 | Hydraulic Ar | 1 |
| 10***42 | Structural Ar | 1 |
104-7439 Common Ar
| 10***39 | Common Ar | 1 |
| 10***40 | Electrical Ar | 1 |
| 10***41 | Hydraulic Ar | 1 |
195-9753 Kit-Maintenance
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
| 10***87 | Switch As-Toggle; (Screed Raise/Hld/Float) | 1 |
Operator Station
104-7449 Console Ar
| 10***49 | Console Ar | 1 |
| 10***73 | Console Group-Operator | 1 |
104-7473 Console Gp-Operator
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 4 |
| 03***49 | Nut-Self Lock; (No.10.Unc) | 4 |
| 08***53 | Bolt; (3/8-16x0.625-In)(3/8-16-2a Thd) | 2 |
114-0322 Gauge Gp-Cluster
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***22 | Gauge Group-Cluster | 1 |
| 11***81 | Kit-Gauge Housing | 1 |
104-7454 Horn & Alarm Gp
| 10***54 | Horn & Alarm Group | 1 |
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 1 |
132-3090 Lever Gp-Propel
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
199-8398 Module Gp-Speedometer & Tach
| 19***98 | Module Group-Speedometer & Tach | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 5 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 5 |
154-9597 Panel Gp-Instrument
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 07***00 | Switch As-Toggle; (Starter Engine Battery Charger) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
132-1181 Panel Gp-Instrument
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 07***00 | Switch As-Toggle; (Starter Engine Battery Charger) | 1 |
| 08***41 | Switch; (Machine/Engine Remote Stop) | 1 |
104-7470 Platform Gp
| 10***70 | Platform Group | 1 |
| 10***47 | Pin | 2 |
| 11***11 | Armrest As | 2 |
170-5472 Seat Gp
| 10***68 | Grip-Handle | 2 |
| 10***41 | Umbrella Group; -Bg-225c | 1 |
| 11***84 | Seat Group | 1 |
119-1784 Seat Gp
| 11***84 | Seat Group | 1 |
| 19***76 | Kit-Armrest; (Lh) | 1 |
| 19***77 | Kit-Armrest; (Rh) | 1 |
270-2417 Seat Gp -Vinyl
| 27***17 | Seat Group; -Vinyl | 1 |
| 27***19 | Arm; (Lh) | 1 |
| 27***80 | Arm; (Rh) | 1 |
103-7332 Seat Gp
| 10***17 | Post As-Seat | 1 |
| 10***32 | Seat Group | 1 |
| 11***84 | Seat Group | 1 |
104-7448 Seat Gp
| 10***32 | Seat Group | 1 |
| 10***48 | Seat Group | 1 |
| 17***72 | Seat Group | 1 |
108-4135 Steering Column Gp
| 07***65 | Nut, 13/16 | 1 |
| 08***11 | Ring | 2 |
| 10***35 | Steering Column Group | 1 |
138-7139 Steering Column Gp
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 08***11 | Ring | 2 |
| 10***12 | Bracket As-Motor | 1 |
187-6649 Umbrella Gp
| 18***49 | Umbrella Group; -Ap-650b | 1 |
106-8541 Umbrella Gp
| 10***41 | Umbrella Group; -Bg-225c | 1 |
Power Train
128-2482 Filter Gp-Oil
| 07***92 | Filter-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 12***82 | Filter Group-Oil; -Propel | 1 |
105-6639 Final Drive Gp
| 10***39 | Final Drive Group | 1 |
| 10***83 | Planetary Group-Final Drive | 2 |
| 10***84 | Sprocket-Track | 2 |
104-7455 Lines Gp-Propel
| 03***92 | Seal; (126.59mm Id) | 1 |
| 08***56 | Nut | 2 |
| 0T***68 | Bolt,Machine; Tube Mounting And Tube To Junction Block Uoc:Bsv,Bsx | 20 |
105-8883 Planetary Gp-Final Drive
| 03***28 | Seal-O-Ring | 5 |
| 07***90 | Ring-Retaining | 1 |
| 10***83 | Planetary Group-Final Drive | 1 |
109-3655 Valve Gp-Solenoid
| 10***18 | Coil | 1 |
| 10***55 | Valve Group-Solenoid | 1 |
| 13***99 | Valve-Solenoid; (Hydraulic Fluid) | 1 |
Service Equipment And Supplies
104-7446 Finish Ar
| 10***46 | Finish Ar | 1 |
| 11***94 | Plate & Film Group | 1 |
116-4563 Finish Ar
| 11***95 | Plate & Film Group | 1 |
| 11***63 | Finish Ar | 1 |
7r-4741 Lines Gp-Spray Down
| 08***77 | Adapter | 1 |
| 1G***70 | Extension-Curve | 1 |
| 1G***79 | Hose As | 1 |
129-9126 Parts Gp-Uptime
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 08***41 | Switch; (Machine/Engine Remote Stop) | 1 |
| 10***88 | Nozzle | 1 |
239-3572 Plate & Film Gp -English
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
| 08***52 | Decal-Caution, Hopper Support | 2 |
| 11***96 | Plate-Warning; (Operating Instructions) | 1 |
116-3294 Plate & Film Gp
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 08***67 | Film-Warning; (No Step)(No Step) | 2 |
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
115-5852 Plate & Film Gp -Engine Information
| 11***52 | Plate & Film Group; -Engine Information | 1 |
239-3570 Plate & Film Gp -French
| 15***38 | Plate-Warning; (Operating Instructions) | 1 |
| 15***49 | Film-Identification | 1 |
| 15***59 | Film; (Conveyor Control Module) | 1 |
239-3573 Plate & Film Gp -English
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
| 08***52 | Decal-Caution, Hopper Support | 2 |
| 11***96 | Plate-Warning; (Operating Instructions) | 1 |
116-3295 Plate & Film Gp
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 08***67 | Film-Warning; (No Step)(No Step) | 2 |
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
239-3571 Plate & Film Gp -French
| 15***38 | Plate-Warning; (Operating Instructions) | 1 |
| 15***49 | Film-Identification | 1 |
| 15***59 | Film; (Conveyor Control Module) | 1 |
087-0889 Reel Gp-Washdown Hose
| 08***89 | Reel Group-Washdown Hose | 1 |
| 17***28 | Fitting-Swivel | 1 |
| 17***29 | Seal-V-Ring | 1 |
137-0197 Reel Gp-Washdown Hose
| 03***72 | Bolt; (3/8-16-Thd) | 4 |
| 08***89 | Reel Group-Washdown Hose | 1 |
| 10***49 | Plate | 2 |
Slope And Grade Control
119-1766 Beam Gp-Transverse
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 10 |
| 08***15 | Cushion-Rubber | 2 |
| 11***66 | Beam Group-Transverse | 1 |
168-6500 Cable Gp-Control -Grade
| 10***63 | Clamp | 1 |
| 11***95 | Plug | 1 |
| 11***63 | Cable; (Coiled) | 1 |
110-2420 Cable Gp-Control
| 10***20 | Cable As-Rh | 1 |
| 10***21 | Cable As-Lh | 1 |
| 10***22 | Cable As | 2 |
108-0042 Control Gp-Grade
| 10***42 | Control Group-Grade | 1 |
| 11***93 | Bracket | 1 |
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
194-6990 Control Gp-Grade & Slope -Premier Control System
| 11***29 | Cap-Dust | 1 |
| 12***36 | Bracket-Mounting | 2 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
123-0885 Control Gp-Grade & Slope -Premier Control System
| 11***43 | Mounting Group-Control; -Topcon Control System | 2 |
| 11***29 | Cap-Dust | 1 |
| 12***36 | Bracket-Mounting | 2 |
130-7053 Control Gp-Grade & Slope -Premier Control System
| 12***36 | Bracket-Mounting | 2 |
| 13***53 | Control Group-Grade & Slope; -Premier Control System | 1 |
| 16***30 | Sensor-Slope | 1 |
209-3130 Control Gp-Grade & Slope
| 11***10 | Screw-Pan Head | 8 |
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
239-2367 Control Gp-Grade & Slope
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
109-0187 Control Gp-Grade & Slope -Premier Control System
| 10***87 | Control Group-Grade & Slope; -Premier Control System | 1 |
| 11***43 | Mounting Group-Control; -Topcon Control System | 2 |
| 12***48 | Mounting Group-Control; -Premier Control System | 1 |
192-9234 Control Gp-Grade & Slope -Topcon Control System
| 10***63 | Clamp | 2 |
| 10***20 | Cable As-Rh | 1 |
| 10***21 | Cable As-Lh | 1 |
209-3129 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***97 | Plug | 1 |
168-5031 Control Gp-Grade & Slope
| 14***22 | Cover | 1 |
| 14***25 | Seal-Bushing | 1 |
| 14***26 | Gasket | 1 |
144-7938 Control Gp-Grade & Slope -Topcon Control System
| 10***76 | Tube-Control | 2 |
| 11***20 | Cable Group-Control | 1 |
| 11***43 | Mounting Group-Control; -Topcon Control System | 2 |
113-1195 Control Gp-Grade & Slope -Topcon Control System
| 10***31 | Bracket As | 1 |
| 10***37 | Bracket As | 1 |
| 10***76 | Tube-Control | 2 |
190-7525 Control Gp-Grade & Slope -Topcon Control System
| 10***94 | Junction Box | 2 |
| 10***98 | Control Group-Grade & Slope | 2 |
| 10***08 | Sensor Group-Grade; (Control) | 2 |
209-3125 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***97 | Plug | 1 |
112-4043 Mounting Gp-Control -Topcon Control System
| 11***43 | Mounting Group-Control; -Topcon Control System | 1 |
| 13***89 | Support As; (Sensor) | 1 |
| 25***04 | Spacer | 4 |
135-3860 Mounting Gp-Control -Premier Control System
| 13***60 | Mounting Group-Control; -Premier Control System | 1 |
| 13***50 | Mount As | 2 |
| 18***61 | Bracket | 1 |
122-0348 Mounting Gp-Control -Premier Control System
| 12***48 | Mounting Group-Control; -Premier Control System | 1 |
| 13***84 | Plate As | 2 |
| 13***85 | Mount As | 2 |
185-4061 Sensor Ar-Grade -Premier Control System
| 11***93 | Bracket | 1 |
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 18***44 | Jack Group-Height Adjuster | 1 |
122-0090 Sensor Gp-Grade -Averaging Ski
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 12***99 | Arm-Follower | 1 |
122-0094 Sensor Gp-Grade
| 11***29 | Cap-Dust | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
209-3131 Sensor Gp-Grade -Sonic
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
209-3132 Sensor Gp-Grade -Averaging Ski
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
Undercarriage
114-1888 Bogie Gp-Center
| 00***31 | Cup-Bearing | 4 |
| 00***32 | Cone-Bearing | 2 |
| 10***58 | Shim; (1.5-mm Thk) | 4 |
114-1887 Bogie Gp-Front
| 00***31 | Cup-Bearing | 4 |
| 00***32 | Cone-Bearing | 2 |
| 10***58 | Shim; (1.5-mm Thk) | 4 |
105-6640 Bogie Gp-Rear
| 10***40 | Bogie Group-Rear | 1 |
| 10***56 | Bearing-Sleeve | 2 |
| 10***50 | Frame As-Bogie | 1 |
114-5539 Idler Gp-Front
| 00***31 | Cup-Bearing | 2 |
| 00***32 | Cone-Bearing | 1 |
| 10***91 | Pin | 2 |
222-3058 Link As-Track
| 11***22 | Bushing-Track | 50 |
| 22***58 | Link As-Track | 1 |
| 25***02 | Seal As | 100 |
9n-4329 Link As-Track
| 5A***87 | Bolt-Track-( 9/16 X 18 X 3.0 In) | 4 |
| 6B***78 | Pin-Track Link | 50 |
| 6S***46 | Seal (Washer) | 200 |
239-2366 Mounting Gp-Averaging Ski
| 23***66 | Mounting Group-Averaging Ski | 1 |
| 28***75 | Collar | 4 |
| 28***77 | Tube | 2 |
3t-4352 Roller Gp-Track
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 4 |
| 3N***95 | Ring (For Extreme Temperatures) | 2 |
231-3079 Roller Gp-Track -Single Flange
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 21***57 | Seal Group-Duo-Cone | 2 |
| 23***79 | Roller Group-Track; -Single Flange | 1 |
6s-3609 Roller Gp-Track Carrier
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 5 |
| 17***60 | Roller As | 1 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
105-6643 Roller Gp-Track Carrier
| 10***43 | Roller Group-Track Carrier | 1 |
| 6S***09 | Roller Group-Track Carrier; Track Carrier Roller Group | 2 |
| 7X***51 | Bolt-Plt; (5/8unc X 3 3/4) | 2 |
105-6644 Track Gp
| 10***44 | Track Group | 1 |
| 13***98 | Pad As-Track | 50 |
| 13***90 | Plate-Backing | 49 |
104-7443 Undercarriage Ar
| 10***43 | Undercarriage Ar | 1 |
| 10***39 | Final Drive Group | 1 |
| 10***40 | Bogie Group-Rear | 2 |
BG-245C serial number reference
On this track paver the ID/PIN plate is on the main frame, not on the screed (the screed carries its own separate plate). Read the first 3 characters as the plant/model serial prefix and the following 5 digits as the sequential unit number built under that prefix.
| Prefix | Identifies | Notes |
|---|---|---|
| 4XN | BG-245C track asphalt paver (Cat/Barber-Greene dual badge with AP-1050B), 3116 engine | Confirmed serial prefix for this paver. Parts and service literature carry the combined machine header "Caterpillar AP-1050B / Barber-Greene BG-245C Asphalt Pavers," serial range 4XN00001-up, powered by the 3116 engine. Same Cat/Barber-Greene dual-badge naming convention used on the smaller AP-650B/BG-225C pair and the AP-1055B/BG-2455C pair, though those are separate size classes, not the same platform. |
| 6ZN | BG-245C track asphalt paver (Cat/Barber-Greene dual badge with AP-1050B), 3116 engine | Second confirmed serial prefix under the identical combined "Caterpillar AP-1050B / Barber-Greene BG-245C Asphalt Pavers" header, serial range 6ZN00001-up, 3116 engine. Same machine family as 4XN, later production run. |
Frequently asked questions
What engine powers the Caterpillar BG-245C?
A Cat 3116TA turbocharged and aftercooled 6-cylinder diesel, 6.6L displacement, rated 174 hp (130 kW) gross / 158 hp (118 kW) net at 2200 rpm.
What is the operating weight of the BG-245C?
Bare tractor weight is about 16,015 kg (35,300 lb). Operating weight ranges 17,620-19,250 kg (38,900-42,500 lb) depending on the screed fitted (Pavemaster vs. Extend-A-Mat).
What replaced the Cat BG-245C?
The BG-2455C succeeded it, carrying the same D3-derived track paver chassis and 3116-family engine forward, paired with the Cat AP-1055B badge twin.
What BG-245C owners discuss
What engine quirks show up on the 3116TA in the BG-245C?
Owners flag a handful of recurring 3116 traits that carry over to the paver application. Injector cup failure is the classic false alarm — it mimics a blown head gasket or ring/blowby problem, so a compression and leak-down check before tearing into the top end saves time. Oil seepage from gaskets and seals is common on higher-hour units and is usually cosmetic rather than urgent. The mechanical governor's fuel ratio control (FRC) diaphragm, which limits fuel delivery until boost catches up, drifts out of calibration over time and shows up as flat spots or smoke on acceleration. Cat 3116s also require straight-weight CF-4 or higher oil rather than multi-grade, tied to the closed crankcase ventilation design — running the wrong oil accelerates wear. A subset of mid-1990s builds used a supplier valve that could drop into a cylinder on failure; on a machine from that window, have your dealer verify valve condition and any related service history before relying on the engine for daily production.
How does the fully hydrostatic track-propel system typically behave, and what do operators complain about?
The hydrostatic drive on this class of track paver is generally regarded as smooth and precise for paving-speed control once it's dialed in, but two complaints recur: creep or drift at very low paving speeds as pumps and motors age, and mismatched left/right tracking that operators first blame on the drive rather than on track tension. Because propel speed is directly tied to mat quality, any hunting or surging in hydrostatic response is worth chasing down early rather than working around it with throttle changes.
What undercarriage and track wear patterns are typical for this era of track paver?
Track tension is the single biggest driver of undercarriage cost on these machines — over-tightening accelerates wear on pins, bushings, and sprockets and can break steel-reinforced sections, while running loose invites detracking and drive-side damage. On rubber pads, the more paver-specific failure mode is asphalt buildup on the inner (wheel-path) surface: material that isn't cleaned off between shifts bonds to the rubber, then peels away chunks of pad when it releases, especially with polymer-modified mix. Routine cleaning and anti-stick coatings on the pads and track frame extend service life more than any single adjustment.
What screed and grade-sensor issues come up in the field?
Screed plate wear rate varies heavily by mix — abrasive granite aggregate chews through plates far faster than softer limestone blends, so replacement interval is really an hours/tonnage question rather than a calendar one. On sonic/ultrasonic grade and slope sensors, the most common complaint isn't sensor failure but misaim: shifting the screed extenders in or out changes the sensor's angle to the mat, and if it isn't re-squared to roughly 90 degrees over the reference surface, thickness control drifts even though the sensor itself is working fine.
What electrical and sensor gremlins are typical on hydrostatic pavers of this vintage?
Most reported electrical trouble on machines this age traces to the environment rather than component design: wiring harnesses routed near the engine or hydraulic lines get heat-cycled and chafe over years of service, and connectors exposed to hot-mix steam and dust corrode or develop intermittent contact. Sonic grade sensors can also throw false readings when steam or blowing dust interferes with the return signal, which reads like a sensor fault but clears once conditions settle. Tracing an intermittent fault to a chafed harness section or a corroded connector is usually more productive than replacing the sensor or control module first.
What auger and conveyor wear patterns should owners watch for?
Auger flights wear gradually until they stop moving mix evenly across the paving width, which shows up as an inconsistent mat rather than a sudden failure — operators who track actual wear (measured, not guessed by the calendar) can plan replacement for an off-season shop window instead of losing a paving day mid-job. Conveyor chains and flight bars see similar gradual wear from the abrasive mix; periodic inspection of chain slack and flight condition alongside the auger catches both before they affect production.
What should a buyer check on a used BG-245C before purchase?
Confirm the serial prefix (4XN or 6ZN) matches the badge and that the machine hasn't been mixed up with a similarly-built sibling model — the paver family shares a lot of common sheet metal across model numbers. On the engine, check for smoke or power complaints consistent with FRC drift or injector cup wear, verify oil type/change history given the CF-4 straight-weight requirement, and ask about any valve-related work if the engine falls in the affected mid-1990s build window. Cycle the hydrostatic propel through its full speed range in both directions looking for creep, drift, or side-to-side tracking mismatch. Inspect track tension and pad condition for asphalt buildup damage, and check screed plate and auger flight wear against the mix types the machine ran. Test the grade and slope sensors through a full range of motion and confirm the wiring harness near the engine and screed hasn't been chafed or spliced repeatedly. For anything involving the hydrostatic pump/motor circuit or engine internals, have your dealer verify before committing to a price.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific BG-245C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.