Caterpillarasphalt paver
Caterpillar BG-2455C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar BG-2455C is a tracked asphalt paver built during the era when Caterpillar sold the Barber-Greene-badged line alongside its own Cat-nameplate twin, the AP-1055B, both covered by one shared machine-systems manual. Power comes from a Caterpillar 3116TA turbocharged inline-six diesel, 6.6L displacement, rated 174 hp (130 kW) at 2200 rpm, a mechanical HEUI-injection engine carrying an ECM on the engine only (MID 036) with no separate digital operator dash on the paver. Operating weight without screed is 16,101 kg (35,501 lb). The base screed works from 2.44m (8ft) and extends with bolt-on sections to 9.14m (30ft), covering shoulder work through full-width mainline paving on one chassis. Maximum paving speed is 61 m/min, travel speed 15 km/h (9.3 mph), riding on rubber-padded steel tracks about 457mm (18in) wide. The BG-2455C sits in a documented Caterpillar/Barber-Greene family group spanning AP-650B, AP-800C, AP-1000B, AP-1050B, and AP-1055B on the Cat side, and BG-225C, BG-245C, BG-260C, and BG-2455C on the Barber-Greene side, all built on shared machine-systems platforms.
Across this platform the running change was the 3116TA engine stepping up from the smaller-displacement power used on lighter siblings, giving the 2455C the output for wider mats and higher production tonnage. No BG-2455D or other lettered successor under the Barber-Greene nameplate is documented; Caterpillar continued the architecture forward under the AP nameplate instead, moving through AP-1055D with the C7 ACERT engine and eventually the C7.1-powered AP1055. That gap is exactly why the BG-2455C still matters in the parts market: catalogs and cross-reference charts treat it as one platform with the AP-1055B and the wider AP-1000/AP-1050/BG-240C/BG-245C/BG-260C group, so injectors, sensors, and undercarriage components sourced for any one of them commonly fit the BG-2455C too. Running units and parts-only cores both stay in demand because the mechanical HEUI 3116TA driveline is simpler to diagnose and rebuild in the field than the ACERT electronics that came later.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar BG-2455C specifications
Engine
| Engine model | 3116TA, turbocharged inline-6 diesel |
| Displacement | 6.6 L (402.8 cu in) |
| Cylinders | 6, inline |
| Gross power | 130 kW (174 hp) at 2200 rpm |
| Net power | Not published for this model — verify with dealer |
| Emissions tier | Not published for this model. Mechanical unit-injection 3116TA, predates modern off-highway emissions certification |
Weights
| Operating weight (base unit, screed not included) | 16,101 kg (35,501 lb) |
| Shipping weight | Not published separately from operating weight |
| Ground pressure | Not published |
Dimensions
| Overall length with screed | 6.58 m (21.59 ft) |
| Transport width | 3.05 m (10 ft) |
| Transport height | 2.77 m (9.09 ft) |
| Track length on ground | 2.72 m (8.92 ft) |
| Track shoe width | 457 mm (18 in) |
Performance
| Standard paving width | 2.44 m (8 ft) |
| Maximum paving width | 9.14 m (30 ft) |
| Maximum paving speed | 61 m/min (200 ft/min) |
| Maximum travel speed | 15 km/h (9.3 mph) |
| Auger diameter | 406 mm (16 in) |
| Gradeability | Not published |
Service capacities (summary)
| Fuel tank | 284 L (75.1 gal) |
| Hydraulic system | 83-151 L (22-40 gal); varies by configuration/series — verify with dealer |
| Engine oil (with filter) | 15 L (3.96 gal); unconfirmed — verify with dealer |
| Cooling system | 32 L (8.4 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
BG-2455C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - 3116TA diesel | approx. 19-25 L (5.0-6.6 US gal), varies by oil pan configuration - exact paver-specific figure not confirmed, verify against dipstick/OMM before service | Cat DEO or Cat DEO-ULS diesel engine oil; SAE 15W-40 for general/warm climates, SAE 10W-30 for cold-start conditions per the ambient-temperature viscosity chart |
| Cooling system | 31.8 L (8.4 US gal) | Cat ELC (Extended Life Coolant) or Cat DEAC (Diesel Engine Antifreeze/Coolant), premixed to the standard 50/50 glycol-water ratio; adjust glycol percentage for extreme cold per climate |
| Fuel tank | 284.3 L (75.1 US gal) | Ultra-low-sulfur No. 2-D diesel fuel; use winter-blend or treated fuel below freezing to prevent gelling |
| Hydraulic system (tank and lines, shared with propel circuit) | 151.4 L (40.0 US gal) | Cat TDTO (Transmission/Drive Train Oil) or Cat HYDO Advanced, matched to ambient temperature - lighter SAE 10W grade in cold climates, SAE 30 or SAE 50 in warm climates, per the machine's viscosity-by-temperature chart |
| Propel final drives (each, left/right track) | not documented for this model - check oil level via drain/fill plug and follow OMM interval; do not assume a figure without confirming on the machine | Cat TDTO drive-train oil, viscosity selected by ambient temperature |
| Chassis and screed grease points (spec only, no fixed capacity) | n/a - lubricate to purge at each fitting per OMM interval | Cat Advanced 3Moly Grease (lithium-complex, NLGI 2, molybdenum disulfide) for moderate load/speed/temperature points; Cat Multipurpose Grease for low-load, low-speed fittings |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar BG-2455C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the BG-2455C beyond the schedule
Predictive Maintenance & Fluid Analysis
Pull S·O·S oil samples from the 3116TA at every oil change to catch aftercooler-coking fuel dilution and turbocharger wear metals before power loss shows up on the mat. Track coolant condition against the ELC interval, since the mechanical HEUI engine has no onboard fault-code display to flag an overheating trend early. Sample hydraulic oil from the propel, auger, and conveyor circuits together; one shared reservoir means contamination in a single feeder circuit shows up as varnish across all three.
Corrective & Common Repairs
Track-tracking drift is the BG-2455C's signature undercarriage complaint: correct it at the track-roller-frame tracking lever and linkage bar before chasing pad wear as the cause. Conveyor stalling under load usually traces to a broken valve spring in the feeder hydraulic manifold, not the drive chain; purge the manifold lines after any hose or valve work to clear trapped air. Aftercooler fouling from coked blow-by oil is common on units idled between truck loads. Switch to straight-grade engine oil per the 3116TA bulletin instead of multi-viscosity.
Overhaul & Rebuild Points
At major-hour rebuild, inspect the turbocharger shaft and aftercooler core together; coking from blow-by oil mist restricts both, and they typically need joint replacement rather than one failing alone. Rebuild the track-roller-frame tracking linkage as a full set instead of swapping a single worn lever, since the drift complaint recurs fast on mixed old/new linkage. Check the auger and conveyor drive-chain bearings and the feeder manifold valve springs at the same interval; on high-hour BG-2455C units chain wear and spring failure tend to show up together.
Seasonal & Environment Servicing
Clean the 3116TA's aftercooler and radiator core of asphalt dust and fines every shift during hot-mix season; packed fines add to the coking problem the engine already fights from low-rpm idle duty cycles between trucks. Before cold-weather layup, drain and inspect the feeder hydraulic manifold purge lines so trapped moisture doesn't freeze and crack fittings. Check track tension more often through temperature swings, since the rubber-padded steel track and tracking linkage react to thermal expansion between hot mat-side work and cold morning startups.
BG-2455C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 112-6523 | Insert-Fuel Filter | Fuel system service | Check fitment → |
| 119-0073 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 077-5232 | Filter Element-Breather | Hydraulic service | Check fitment → |
| 054-1719 | Filter Element As-Oil | Hydraulic service | Check fitment → |
| 077-6325 | Kit-Seal | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
BG-2455C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 0100 FMI 03 (MID 036) | Engine oil pressure sensor circuit voltage above normal | Open circuit or short to +battery on the oil pressure sensor signal wire, or a failed sensor | Check the sensor connector and harness for damage or corrosion, then test signal wire continuity and sensor supply voltage before replacing the sensor |
| CID 0100 FMI 04 (MID 036) | Engine oil pressure sensor circuit voltage below normal, or an actual low oil pressure condition | Short to ground on the sensor wiring, failed sensor, or genuinely low oil pressure from oil level, pump, or filter issues | Stop the engine, check oil level and filter condition first, then check the sensor wiring for a short before condemning the sensor |
| CID 0110 FMI 00 (MID 036) | Engine coolant temperature reading above the normal operating range (overheat) | Low coolant level, blocked radiator core, slipping or failed fan drive, or thermostat stuck closed | Shut down and let the engine cool, check coolant level and radiator for debris, verify fan operation before restarting |
| CID 0110 FMI 03 (MID 036) | Engine coolant temperature sensor circuit voltage above normal | Open circuit or short to +battery on the coolant temperature sensor wiring, or a failed sensor | Inspect the sensor connector and harness, test wiring continuity and sensor resistance against spec before replacing the sensor |
| CID 0111 FMI 01 (MID 036) | Engine coolant level below normal | Low coolant in the system from a leak, or a failed coolant level sensor/probe | Check for visible coolant leaks at hoses, radiator, and water pump, top off coolant, and verify the level sensor before returning to service |
| CID 0190 FMI 08 (MID 036) | Engine speed/timing sensor signal abnormal or erratic | Damaged sensor wiring, incorrect sensor air gap, or a failing crankshaft/timing sensor | Check sensor mounting and air gap, inspect harness for chafing near the timing gear housing, then test the sensor output before replacement |
| CID 0168 FMI 02 (MID 036) | Electrical system (battery) voltage erratic, intermittent, or incorrect | Loose or corroded battery connections, a failing alternator/regulator, or a poor ECM power/ground connection | Check battery terminals and ground straps, load-test the charging system, and clean/tighten ECM power and ground connections |
| CID 0001-0006 FMI 05 (MID 036) | Injector solenoid circuit for the affected cylinder is open | Broken or disconnected injector wiring, a failed valve cover harness, or a failed injector solenoid | Inspect the injector valve cover harness and connectors for damage, test circuit continuity, then test the injector solenoid before replacement |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
BG-2455C attachments & work tools
Screed and strike-off extensions
BG-2455C runs a vibratory tamper-bar screed with a base paving width around 2.4 m (8 ft), built up with bolt-on strike-off extensions to reach a maximum paving width near 9.1 m (30 ft) for this class. Extension sections bolt to the heavy-duty screed frame rather than using a quick-hitch coupler; front or rear extender arrangements are both used in this paver family depending on job width.
Screed heating
Extended screed plates are electrically heated to bring the strike-off up to working temperature before paving and hold mat temperature across wide passes. Heating is standard on the factory screed rather than a bolt-on add-on.
Auger and conveyor extensions
Auger diameter on the base machine is about 406 mm (16 in); bolt-on auger extension sections pair with each screed width extension so material still reaches the widened strike-off. Left and right augers and left and right feeders are each controlled independently through the machine's material-delivery control system, letting the operator balance head-of-material on wide or crowned mats.
Hopper wings
The hopper uses hydraulically folding wings/apron to widen material intake and transfer to the augers, with single-touch fold and release. Cat issued a heavy-duty hopper hinge pin and hardware rework as a factory support program across this exact paver group (AP-650B, AP-800C, AP-1000B, AP-1050B, AP-1055B and Barber-Greene BG-225C, BG-245C, BG-260C, BG-2455C), so hinge-pin hardware is a documented service/guarding upgrade for this machine.
Undercarriage
BG-2455C is a track paver, not wheeled; it runs on rubber-padded steel tracks roughly 457 mm (18 in) wide per side for traction and flotation on soft or graded base. No wheeled variant is documented for this exact model designation.
Propel and material-delivery control system
The paver shares a common propel electronic control system architecture across the AP-650B through AP-1055B / BG-225C through BG-2455C family, governing travel speed and auger/feeder control rather than being a separate bolt-on kit. Dual left/right operator stations with independent speed-control dials are typical factory configuration for this paver size class.
Extension mounting/coupler method
Screed and auger width extensions attach with bolted structural flanges plus hydraulic quick-disconnects for the heat and vibration circuits, not a pin-and-hitch quick coupler as used on excavator-style work tools. This bolt-on method is standard across Cat/Barber-Greene screeds of this frame class.
All BG-2455C assemblies by section
Every catalogued assembly group for the Caterpillar BG-2455C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
136-0596 Aftercooler Gp-Water
| 03***83 | Nipple-Front Axle Suction Port | 1 |
| 10***46 | Hose | 1 |
| 13***96 | Aftercooler Group-Water | 1 |
143-0458 Air Cleaner Gp
| 14***58 | Air Cleaner Group | 1 |
| 17***87 | Bracket As | 1 |
| 17***93 | Tube As | 1 |
172-0993 Air Cleaner Gp
| 06***70 | Cap | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
207-8264 Bracket Gp-Mounting
| 10***70 | Elbow-Exhaust | 1 |
| 10***25 | Coupling-Exhaust | 1 |
| 11***89 | Muffler | 1 |
143-0459 Exhaust Gp
| 14***59 | Exhaust Group | 1 |
| 7C***55 | Hose | 1 |
| 8T***03 | Clamp; (Hose) | 2 |
9y-4968 Lines Gp-Air
| 10***38 | Manifold-Exhaust | 1 |
| 11***00 | Gasket-Manifold | 3 |
| 14***48 | Bolt; (M10x1.5x65-mm)(M10x1.50x65mm) | 12 |
7w-9248 Manifold Gp-Exhaust
| 11***50 | Gasket | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 3 |
| 4W***61 | Manifold-Intake | 1 |
4w-3480 Manifold Gp-Inlet
| 12***40 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
| 4W***80 | Manifold Group-Inlet; Inlet Manifold Group | 1 |
124-9340 Turbocharger Gp
| 11***23 | Insert-Fuel Filter | 1 |
| 12***40 | Turbocharger Group | 1 |
| 12***01 | Valve Group-Check; -Fuel-Fuel Filter | 1 |
119-3084 Turbocharger Gp
| 10***77 | Housing | 1 |
| 11***58 | Cartridge Group-Turbocharger | 1 |
| 11***84 | Turbocharger Group | 1 |
Basic Engine
108-5759 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 10***59 | Camshaft Group; (Single) | 1 |
| 13***76 | Camshaft Assem. | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
103-0863 Cover Gp-Cylinder Block
| 10***63 | Cover Group-Cylinder Block | 1 |
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 13***40 | Spacer; (9x15x15-mm Thk) | 1 |
7l-0004 Cover Gp-Front Housing
| 10***20 | Cover As-Front | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
4w-2172 Cover Gp-Valve Mechanism
| 11***40 | Gasket; (Valve Cover) | 1 |
| 11***60 | Cover | 1 |
| 4W***72 | Cover Group-Valve Mechanism; Valve Mechanism Cover Group | 1 |
4w-2197 Crankshaft Gp
| 10***08 | Bearing-Main; (Standard) | 6 |
| 14***62 | Bearing; (0.25mm Undersize) | 0 |
| 14***64 | Bearing; (0.5mm Undersize) | 0 |
149-5403 Cylinder Block Gp
| 14***02 | Pin, Cylinder Block As | 1 |
| 14***03 | Cylinder Block Group | 1 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
7e-2482 Cylinder Block Gp
| 14***03 | Cylinder Block Group | 1 |
| 1W***07 | Sleeve | 2 |
| 4P***51 | Tube As-Piston Cooling | 6 |
190-9066 Cylinder Head As
| 11***61 | Sleeve | 6 |
| 16***63 | Insert-Valve Seat; (Inlet) | 6 |
| 19***66 | Cylinder Head As | 1 |
140-7373 Cylinder Head As
| 11***36 | Seal-Valve Stem | 12 |
| 14***73 | Cylinder Head As | 1 |
| 19***66 | Cylinder Head As | 1 |
140-7371 Cylinder Head Gp
| 11***36 | Seal-Valve Stem | 12 |
| 13***19 | Valve-Exhaust | 6 |
| 14***71 | Cylinder Head Group | 1 |
159-0305 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
| 14***71 | Cylinder Head Group | 1 |
160-5130 Cylinder Head Gp
| 14***71 | Cylinder Head Group | 1 |
| 16***30 | Cylinder Head Group | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 3 |
9y-9177 Damper & Pulley Gp
| 20***88 | Damper Assem. | 1 |
| 6V***30 | Bolt; (M10x1.5x60-mm) | 8 |
| 9Y***76 | Pulley-Crankshaft | 1 |
136-8877 Drain Gp-Engine Oil
| 13***77 | Drain Group-Engine Oil | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
7c-0044 Drive Gp-Fan
| 4W***03 | Cup-Roller Bearing | 2 |
| 4W***04 | Cone-Roller Bearing | 2 |
| 4W***42 | Spacer; (35.3x45.5x38.331-mm Thk) | 1 |
240-7134 Drive Gp-Pump
| 00***44 | Elbow; (45-Deg) | 1 |
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 15***72 | Plug As | 1 |
240-5569 Drive Gp-Pump
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 07***06 | Coupling | 2 |
| 08***90 | Gear | 3 |
4w-5428 Drive Gp-Water Pump
| 03***75 | V-Belt; (Pump Drive)(Water) | 1 |
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
9y-2755 Flywheel Gp
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
101-4540 Gear Gp-Front
| 10***07 | Shaft-Cam Idler | 1 |
| 10***08 | Plate-Retaining | 1 |
| 10***40 | Gear Group-Front | 1 |
9y-4856 Housing Gp-Flywheel
| 1B***70 | Plug-Pipe; (Drain) | 1 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 1 |
| 2P***94 | Plug-Sealing | 1 |
101-4539 Housing Gp-Front
| 10***39 | Housing Group-Front | 1 |
| 10***11 | Plug | 2 |
| 13***42 | Housing-Front | 1 |
4w-2515 Lifting Gp-Engine
| 4W***82 | Plate-Lifting; (Rear)(Rear) | 1 |
| 4W***83 | Plate-Lifting; (Front) | 1 |
| 4W***15 | Lifting Group | 1 |
104-7486 Mounting Gp-Engine Flexible
| 10***86 | Mounting Group-Engine Flexible | 1 |
| 10***20 | Mount As | 1 |
| 10***66 | Support As-Engine; (Lh) | 1 |
4w-0269 Pan Gp-Oil -Engine
| 11***77 | Pan-Oil | 1 |
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 26***16 | Gasket-Oil Pan; (Engine) | 1 |
107-7639 Piston & Rod Gp
| 10***45 | Crown As-Piston | 1 |
| 10***39 | Piston & Rod Group; Connecting Rod And Piston Group | 1 |
| 10***87 | Ring-Piston (Top-Chrome) | 1 |
4w-5429 Pulley Gp-Crankshaft
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
| 4W***29 | Pulley Group-Crankshaft; Crankshaft Pulley Group | 1 |
| 7W***73 | Pulley-Crankshaft; (1-Groove) | 1 |
9y-0757 Pulley Gp-Fan Drive
| 7C***90 | Pulley-Fan Drive | 1 |
| 8T***08 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 6 |
| 9Y***57 | Pulley Group-Fan Drive | 1 |
107-7722 Rocker Arm Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 10***91 | Seat-Wear | 1 |
| 10***76 | Rocker Arm As; (Unit Injector) | 1 |
115-4203 Seal Gp-Crankshaft
| 11***03 | Seal Group-Crankshaft | 1 |
| 22***09 | Seal Group-Crankshaft; (Rear) | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
4p-4372 Mechanism Gp-Fuel Pump & Valve
| 10***22 | Rocker Arm Group-Valve | 6 |
| 14***47 | Arm As-Lifter | 4 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 2 |
Controls
236-6648 Base As
| 18***65 | Jack Group-Height Adjuster | 1 |
| 1F***50 | Nut Rops Support | 1 |
| 23***48 | Base As | 1 |
185-4044 Jack Gp-Height Adjuster
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***83 | Relay-Time Delay; (Electric Heat) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
Cooling System
100-6269 Cooler Gp-Engine Oil
| 10***69 | Cooler Group-Engine Oil | 1 |
| 23***55 | Gasket | 1 |
| 26***43 | Core As-Engine Oil Cooler | 1 |
104-7485 Cooling Gp-Supplemental
| 10***85 | Cooling Group-Supplemental | 1 |
| 10***76 | Hose-Upper; (Radiator)(Radiator) | 1 |
| 11***28 | Hose-Lower; (Radiator)(Radiator) | 1 |
7c-9048 Lines Gp-Water
| 12***47 | Housing-Water Regulating | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 12***71 | Clamp-Hose | 2 |
159-3137 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 15***37 | Pump Group-Water | 1 |
7c-4508 Pump Gp-Water
| 15***37 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
4w-7589 Pump Gp-Water
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
| 4J***24 | Seal 46.99 mm(1.85 In.) I.D. | 1 |
| 4W***89 | Pump Group-Water | 1 |
171-9705 Radiator Gp
| 03***64 | Cap As-Radiator; (7-Psi) | 1 |
| 17***05 | Radiator Group | 1 |
| 18***36 | Shroud | 1 |
Electrical And Starting System
9w-3043 Alternator Gp-Charging
| 4N***05 | Spacer; (0.42x0.75x0.6-In Thk) | 1 |
| 7C***63 | Bracket-Alternator | 1 |
| 7C***29 | Pulley-Alternator | 1 |
9y-8187 Alternator Gp-Charging
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 10***05 | Plate | 4 |
| 10***06 | Plate As | 4 |
240-3198 Battery Gp
| 03***38 | Screw; (6-32x1.0in) | 4 |
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
154-9600 Box Gp-Control
| 15***00 | Box Group-Control | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
122-9303 Buffer Gp-Sensor -Material Height
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
122-9309 Buffer Gp-Sensor -5000-Hz Pwm
| 12***09 | Buffer Group-Sensor; -5000-Hz Pwm-Conveyor Speed | 1 |
| 14***19 | Sensor Group-Auger | 1 |
| 14***36 | Film-Identification; (Service Codes) | 1 |
151-6257 Control Gp-Conveyor Electronic -Auger
| 15***57 | Control Group-Conveyor Electronic; -Auger | 1 |
| 17***96 | Bracket-Mounting | 1 |
| 17***97 | Flange | 1 |
164-7359 Cover Gp-Wiring Harness
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 16***59 | Cover Group-Wiring Harness | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
155-2651 Distributor Gp-Electronic
| 10***54 | Horn & Alarm Group | 1 |
| 14***40 | Wiring Group-Engine | 1 |
| 15***51 | Distributor Group-Electronic | 1 |
227-5115 Electrical Ar
| 11***33 | Washer; (11x50x6-mm Thk) | 4 |
| 1M***43 | Grommet | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
237-9867 Generator & Mtg Gp-Hydraulic
| 23***67 | Generator & Mtg Group-Hydraulic | 1 |
231-1332 Generator Gp
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 23***32 | Generator Group | 1 |
194-6509 Harness As-Sensor -Engine Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 19***09 | Harness As-Sensor; -Engine Oil | 1 |
158-8051 Harness As-Valve -Tow Point
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
232-6370 Installation Gp-Controls
| 23***70 | Installation Group-Controls | 1 |
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
9x-1439 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
| 19***15 | Tube-Flash; (8 Prong Connection)(Warning Beacon) | 1 |
338-1132 Lamp Gp-Warning Beacon -Amber, Strobe
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 33***32 | Lamp Group-Warning Beacon; -Amber, Strobe | 1 |
116-8711 Lamp Gp-Warning Beacon
| 10***99 | Harness As-Lighting; (Floodlights)(Rear) | 4 |
| 10***29 | Plate | 2 |
| 11***11 | Lamp Group-Warning Beacon | 1 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 03***14 | Screw; (10-32x1-In) | 3 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 2 |
| 11***20 | Tube As | 1 |
116-8703 Lighting Gp-Flood
| 09***47 | Brush As | 1 |
| 11***94 | Bell; (Rear) | 1 |
| 11***61 | Bearing | 2 |
160-7395 Module Gp-Timer
| 16***95 | Module Group-Timer; -Governor Control | 1 |
| 19***06 | Strip-Terminal | 1 |
| 19***80 | Circuit Breaker As; (20-Ampere)(240-Volt Receptacle) | 2 |
170-7071 Motor Gp-Electric
| 11***24 | Clamp | 2 |
| 16***41 | Support-Sensor | 2 |
| 17***71 | Motor Group-Electric; -Fuel Transfer Pump | 1 |
232-6362 Panel Gp-Power -Generator
| 11***07 | Knob | 2 |
| 12***44 | Paddle As | 2 |
| 16***91 | Block As-Mounting; (Position Sensor) | 2 |
145-8519 Sensor Gp-Auger
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***19 | Sensor Group-Auger | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
168-7855 Sensor Gp-Feeder
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***55 | Sensor Group-Feeder | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
219-2385 Sensor Gp-Position -Auger
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***49 | Strap; (Marker) | 1 |
168-3551 Sensor Gp-Position -Steering
| 12***50 | Receptacle As | 1 |
| 12***51 | Bushing | 1 |
| 12***52 | Clamp As-Cable | 1 |
214-4863 Sensor Gp-Position
| 21***63 | Sensor Group-Position; -Rotary-Tc Impeller Clutch, Lh Pedal | 1 |
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
284-8876 Sensor Gp-Position
| 12***72 | Solenoid As; (Fuel Shutoff) | 1 |
| 28***76 | Sensor Group-Position | 1 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 1 |
189-5746 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***46 | Sensor Group-Speed; -Low Output-Engine Timing-Transmission | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
7c-9458 Solenoid Gp-Shutoff
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
| 7C***58 | Solenoid Group-Shutoff; -Fuel | 1 |
160-7396 Solenoid Gp-Throttle -Governor
| 10***52 | Heater As; (22-Volt, 2160-Watt)(Air Inlet) | 1 |
| 10***47 | Strap-Grounding | 1 |
| 12***79 | Stud-Taperlock; (M8x1.25x130-mm) | 1 |
134-2356 Starting Aid Gp -Air Inlet Heater
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
207-1511 Starting Motor Gp-Electric
| 20***11 | Starting Motor Group-Electric | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
207-1517 Starting Motor Gp-Electric
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 20***17 | Starting Motor Group-Electric | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
108-3858 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
172-8660 Switch Gp-Liquid Level -Hydraulic Tank
| 11***18 | Clip | 2 |
| 11***66 | Mount | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
148-3040 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***62 | Screw-Machine; (4-40x0.63-In) | 4 |
187-6531 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***62 | Screw-Machine; (4-40x0.63-In) | 4 |
232-6372 Wiring Gp-Hydraulic Control
| 13***89 | Clip; (Ladder) | 1 |
| 19***81 | Circuit Breaker As; (35-Ampere)(Generator) | 1 |
| 1M***43 | Grommet | 2 |
230-7539 Wiring Gp-Hydraulic Generator
| 19***98 | Panel Group-Electronic; -Material Height-Rh | 1 |
| 19***99 | Panel Group-Electronic; -Material Height-Lh | 1 |
| 22***64 | Harness As-Screed; (Paver To Screed) | 1 |
236-2174 Wiring Gp-Power Train
| 19***99 | Panel Group-Electronic; -Material Height-Lh | 2 |
| 22***64 | Harness As-Screed; (Paver To Screed) | 1 |
| 23***74 | Wiring Group-Power Train | 1 |
234-4416 Wiring Gp-Screed
| 20***72 | Film-Warning; (Accumulator) | 1 |
| 23***16 | Wiring Group-Screed | 1 |
229-3165 Wiring Gp-Screed
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 22***63 | Harness As-Screed; (Electric Heat) | 1 |
| 22***65 | Wiring Group-Screed | 1 |
197-9828 Wiring Gp-Screed
| 19***28 | Wiring Group-Screed | 1 |
| 22***63 | Harness As-Screed; (Electric Heat) | 1 |
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 4 |
230-7538 Wiring Gp-Screed
| 13***65 | Screw | 1 |
| 13***66 | Seal | 1 |
| 20***68 | Cap-Dust | 1 |
Electrical System
196-1299 Panel Gp-Electronic -Material Height-Lh
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 5 |
| 10***63 | Regulator As-Alternator; (24-Volt) | 1 |
| 19***99 | Panel Group-Electronic; -Material Height-Lh | 1 |
196-1298 Panel Gp-Electronic -Material Height-Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 13***48 | Potentiometer As; (Rh Conveyor Speed Dial) | 1 |
Engine Arrangement
159-5999 Engine Ar
| 10***69 | Cooler Group-Engine Oil | 1 |
| 10***39 | Housing Group-Front | 1 |
| 10***40 | Gear Group-Front | 1 |
227-5102 Engine Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***08 | Valve Group-Fluid Sampling; -Coolant | 1 |
239-3115 Engine Ar-Complete
| 10***85 | Cooling Group-Supplemental | 1 |
| 10***86 | Mounting Group-Engine Flexible | 1 |
| 14***58 | Air Cleaner Group | 1 |
Feeder Drag And Auger Conveyors
169-0899 Auger Gp
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***47 | Tube As | 1 |
106-9718 Bearing Gp-Auger
| 10***18 | Bearing Group-Auger | 1 |
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
116-9509 Bearing Gp-Auger
| 11***09 | Bearing Group-Auger | 1 |
| 8I***14 | Bar-Side | 58 |
| 8I***15 | Bar-Side | 29 |
201-5584 Bearing Gp-Auger
| 10***78 | Chain Group-Conveyor; -Rh | 1 |
| 13***56 | Chain Group-Conveyor; -Lh | 1 |
| 20***84 | Bearing Group-Auger | 1 |
107-5892 Chain Gp-Conveyor
| 10***92 | Chain Group-Conveyor | 1 |
| 28***79 | Bar-Side | 232 |
| 28***80 | Foam Insulation; 40 X 60 X 644 mm, Bar-Side | 116 |
134-3956 Chain Gp-Conveyor -Lh
| 10***74 | Conveyor Group-Drag | 2 |
| 10***77 | Footshaft Group | 2 |
| 12***07 | Guard Group-Feeder | 1 |
280-9921 Chain Gp-Conveyor
| 06***66 | Bolt; (3/4-10x1.642-In) | 6 |
| 10***55 | Plate | 1 |
| 10***57 | Slide As | 1 |
105-9278 Chain Gp-Conveyor -Rh
| 10***78 | Chain Group-Conveyor; -Rh | 1 |
| 8I***14 | Bar-Side | 58 |
| 8I***15 | Bar-Side | 29 |
129-3008 Conveyor Ar-Drag & Auger
| 05***20 | Pin-Spring | 58 |
| 10***92 | Chain Group-Conveyor | 1 |
| 12***08 | Conveyor Ar-Drag & Auger | 1 |
230-1539 Conveyor Gp-Auger
| 05***20 | Pin-Spring | 58 |
| 12***59 | Bar-Feeder; (Conveyor) | 29 |
| 23***39 | Conveyor Group-Auger | 1 |
104-7474 Conveyor Gp-Drag
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 08***43 | Gear-Cluster | 3 |
8i-0852 Drive Gp-Conveyor -Drag Conveyor
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 7X***34 | Bolt-Plt; (1/2unc X 5) | 2 |
185-0787 Drive Gp-Conveyor -Auger Conveyor
| 08***53 | Shaft-Governor Control | 1 |
| 18***87 | Drive Group-Conveyor; -Auger Conveyor | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
5e-9809 Extension Gp-Auger -1-Ft, Rh
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
5e-9825 Extension Gp-Auger -2-Ft, Lh
| 03***82 | Screw; (3/8-16x2-In) | 12 |
| 10***41 | Plate | 2 |
| 10***42 | Plate | 2 |
5e-9808 Extension Gp-Auger -1-Ft, Lh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 5E***08 | Extension Group-Auger; -1-Ft, Lh | 1 |
1g-9347 Extension Gp-Auger -6 In
| 08***53 | Shaft-Governor Control | 1 |
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
5e-9826 Extension Gp-Auger -2-Ft, Rh
| 03***21 | Bolt-Allen Hd; (3/8unc X 1) | 4 |
| 10***30 | Bearing-Flange | 1 |
| 10***70 | Key-Square | 1 |
104-7477 Footshaft Gp
| 03***83 | Spacer | 16 |
| 03***53 | Ring-Retaining | 2 |
| 05***74 | Pin | 2 |
129-3007 Guard Gp-Feeder
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
| 12***07 | Guard Group-Feeder | 1 |
228-4458 Shaft Gp-Feeder Drive
| 06***66 | Bolt; (3/4-10x1.642-In) | 2 |
| 11***52 | Plate | 1 |
| 22***58 | Shaft Group-Feeder Drive | 1 |
Frame And Body
110-9496 Arm Gp-Tow
| 10***68 | Grip-Handle | 2 |
| 10***24 | Bar | 1 |
| 11***96 | Arm Group-Tow | 1 |
106-9689 Brace Gp
| 03***72 | Bolt; (3/8-16-Thd) | 2 |
| 10***89 | Brace Group | 1 |
| 13***06 | Screw-Button Head; (1/2-13x1.5-In) | 3 |
109-2722 Bracket Gp-Support
| 10***22 | Bracket Group-Support | 1 |
| 11***62 | Washer | 4 |
| 23***07 | Bar-Latch | 1 |
239-2963 Cover Gp-Access
| 10***56 | Rod; (Prop) | 1 |
| 14***41 | Shim; (6-mm Thk)(6 mm Thk) | 1 |
| 14***57 | Shim; (2-mm Thk)(2 mm Thk) | 1 |
237-9789 Cover Gp-Access
| 11***62 | Washer | 4 |
| 14***47 | Plate-Cover | 1 |
| 17***59 | Foam | 1 |
236-6577 Cover Gp-Access
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 8 |
| 03***72 | Bolt; (3/8-16-Thd) | 11 |
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
143-0456 Cover Gp-Engine & Platform
| 10***56 | Rod; (Prop) | 1 |
| 14***41 | Shim; (6-mm Thk)(6 mm Thk) | 1 |
| 14***57 | Shim; (2-mm Thk)(2 mm Thk) | 1 |
147-6567 Cover Gp-Platform
| 14***67 | Cover Group-Platform | 2 |
| 19***31 | Cover Group-Platform; -Without Generator | 1 |
| 21***88 | Cover Group-Platform | 1 |
217-0588 Cover Gp-Platform
| 10***90 | Extension As | 1 |
| 21***88 | Cover Group-Platform | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 3 |
239-2359 Cover Gp-Platform -W/O Generator, W/O Ventilation
| 12***73 | Extension As | 2 |
| 12***78 | Bar | 2 |
| 12***79 | Bar | 2 |
195-5931 Cover Gp-Platform -Without Generator
| 10***88 | Extension As | 1 |
| 19***31 | Cover Group-Platform; -Without Generator | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 3 |
106-9715 Extension Gp-Main Frame -2 Ft
| 10***15 | Extension Group-Main Frame; -2 Ft | 1 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 4 |
| 10***55 | Panel As | 2 |
215-7553 Extension Gp-Main Frame
| 03***74 | Keeper | 1 |
| 10***39 | Tube As | 1 |
| 10***41 | Tube As | 1 |
116-9510 Extension Gp-Main Frame
| 11***10 | Extension Group-Main Frame | 1 |
| 16***99 | Guard; (Lh) | 1 |
| 16***00 | Guard; (Rh) | 1 |
106-9714 Extension Gp-Main Frame -1 Ft
| 10***14 | Extension Group-Main Frame; -1 Ft | 1 |
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
245-9964 Frame Gp-Main
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 10***15 | Apron As | 2 |
168-0232 Guard Gp-Deflector
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 16***85 | Pin As | 2 |
| 16***86 | Tube | 8 |
104-6579 Guide Gp-Steering
| 10***79 | Guide Group-Steering | 1 |
| 10***01 | Tube As | 1 |
| 10***50 | Tube As | 1 |
169-9539 Hopper Gp
| 16***39 | Hopper Group | 1 |
173-7690 Kit-Hopper
| 17***90 | Kit-Hopper | 1 |
209-2610 Lines Gp-Grease
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 20***10 | Lines Group-Grease | 1 |
| 24***57 | Plate | 1 |
171-1196 Plate Gp
| 17***96 | Plate Group | 1 |
| 24***58 | Heater As-Screed | 2 |
| 24***60 | Plate | 1 |
173-2661 Plate Gp
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 17***61 | Plate Group | 1 |
| 24***58 | Heater As-Screed | 1 |
245-9077 Plate Gp-Screed -Electric Heat, 12-In
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 24***58 | Heater As-Screed | 2 |
| 24***61 | Harness As-Screed; (Heater Element) | 1 |
245-9080 Plate Gp-Screed -Electric Heat, 24-In
| 10***89 | Brace Group | 1 |
| 10***22 | Bracket Group-Support | 1 |
| 24***80 | Plate Group-Screed; -Electric Heat, 24-In | 1 |
245-9079 Plate Gp-Screed -Electric Heat, 12-In
| 10***79 | Guide Group-Steering | 1 |
| 10***68 | Support Group-Tow Arm | 1 |
| 10***70 | Platform Group | 1 |
245-9078 Plate Gp-Screed -Electric Heat, 28-In
| 11***15 | Step As | 1 |
| 11***34 | Bracket As; (Rh) | 1 |
| 11***03 | Bracket As; (Lh) | 1 |
118-7295 Step Gp
| 06***35 | Lock Pin | 2 |
| 10***37 | Lever As | 1 |
| 10***38 | Lever As | 1 |
209-2601 Structural Ar
| 10***64 | Foam | 2 |
| 10***65 | Foam | 2 |
| 10***66 | Foam | 4 |
169-5471 Support Gp-Frame
| 11***62 | Washer | 5 |
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
104-7468 Support Gp-Tow Arm
| 10***39 | Key-Square | 1 |
| 10***68 | Support Group-Tow Arm | 1 |
| 11***62 | Washer | 5 |
239-2982 Suppression Gp-Sound
| 11***62 | Washer | 5 |
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
147-6555 Ventilation Gp-Paver
| 14***28 | Ventilation Group-Paver | 1 |
| 14***55 | Ventilation Group-Paver | 1 |
| 14***81 | Ventilation Group-Paver; -Without Generator | 1 |
146-7628 Ventilation Gp-Paver
| 11***62 | Washer | 5 |
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
238-1275 Ventilation Gp-Paver
| 16***13 | Bolt-Hex; (M36 X 4 X 80) | 1 |
| 18***27 | Plate | 1 |
| 19***74 | Shim; (6.35-mm Thk) | 2 |
147-6981 Ventilation Gp-Paver -Without Generator
| 13***57 | Midroller Group | 4 |
| 14***93 | Bogie Group | 1 |
| 14***81 | Ventilation Group-Paver; -Without Generator | 1 |
239-2358 Ventilation Gp-Paver -Without Generator
| 16***13 | Bolt-Hex; (M36 X 4 X 80) | 1 |
| 18***27 | Plate | 1 |
| 19***74 | Shim; (6.35-mm Thk) | 2 |
Fuel System
129-1102 Base Gp-Fuel Filter
| 12***02 | Base Group-Fuel Filter | 1 |
| 16***56 | Control Group-Fuel Injection | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 4 |
105-1695 Control Gp-Fuel Injection
| 10***95 | Control Group-Fuel Injection | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 1 |
| 6I***82 | Lever As | 1 |
7e-9429 Control Gp-Governor
| 10***68 | Gear As-Drive; (44-Teeth), . Body | 1 |
| 10***85 | Lever-Shutoff; (Output) | 1 |
| 1W***65 | Ring-Retaining | 1 |
7e-8794 Drive Gp-Gov & Transfer Pump
| 1T***68 | Seal-O-Ring; (Fuel Injection Pump) | 1 |
| 6F***73 | Seal--To Top Cover On Selector Valve | 1 |
| 6V***18 | Bolt (M8x1.25x45mm); (M8x1.25x35-mm) | 3 |
7w-4812 Fastener Gp-Fuel Inj Pump
| 13***99 | Governor Group-Unit Injector | 1 |
| 7W***12 | Fastener Group-Governor; Fastener Group(Governor) (~1c K5811) | 2 |
| 7W***34 | Lines Group-Governor Oil; Governor Oil Lines Group | 1 |
129-1213 Governor Gp-Unit Injector
| 10***12 | Clevis | 1 |
| 10***13 | Piston-Servo | 1 |
| 10***87 | Ring-Tolerance | 1 |
130-7323 Governor Gp-Unit Injector
| 13***23 | Governor Group-Unit Injector | 2 |
| 13***89 | Cam-Torque | 1 |
| 4P***67 | Spring Group-Governor | 1 |
131-7899 Governor Gp-Unit Injector
| 00***64 | End; (Hose) | 2 |
| 09***61 | Strap; (Cable) | 1 |
| 10***29 | Hose; (60-cm) | 0 |
9y-3943 Lines Gp-Fuel Ratio Control
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 2 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 2 |
| 6V***28 | Elbow-Face Seal (For 6.35mm Od Tube) | 1 |
149-1350 Lines Gp-Fuel Filter
| 14***50 | Lines Group-Fuel Filter | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
7w-8434 Lines Gp-Governor Oil
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
| 13***76 | Strainer; (Fuel Pump) | 1 |
192-4302 Pump Gp-Fuel
| 11***18 | Seal-O-Ring; (26.64mm Id) | 1 |
| 12***16 | Fuel Injector Group | 1 |
| 13***25 | Bolt-Socket Head; (M6x1x30-mm) | 1 |
107-7732 Pump Gp-Fuel Injection
| 10***32 | Pump Group-Fuel Injection | 1 |
| 14***83 | Separator Group-Water | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 4 |
159-7574 Pump Gp-Fuel Prm & Prim Filter
| 08***68 | Spacer | 1 |
| 15***74 | Pump Group-Fuel Prm & Prim Filter | 1 |
| 17***71 | Motor Group-Electric; -Fuel Transfer Pump | 1 |
149-5380 Pump Gp-Fuel Transfer
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
149-2683 Separator Gp-Water
| 10***49 | Plate | 2 |
| 11***68 | Hose As | 1 |
| 11***72 | Filter Group-Fuel; (Fuel) | 1 |
143-0460 Tank & Pump Gp-Fuel
| 14***60 | Tank & Pump Group-Fuel | 1 |
| 16***28 | Hose As | 1 |
| 16***29 | Hose As | 1 |
190-6742 Tank Gp-Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 19***42 | Tank Group-Fuel | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
166-2912 Tank Gp-Fuel
| 16***12 | Tank Group-Fuel | 1 |
| 16***28 | Hose As | 1 |
| 16***29 | Hose As | 1 |
129-1101 Valve Gp-Check -Fuel
| 12***01 | Valve Group-Check; -Fuel-Fuel Filter | 1 |
Grade References
180-9205 Gauge Gp-Indicator
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5622 Leveler Gp -40-Ft Grade Reference
| 08***09 | Bracket | 7 |
| 08***11 | Shoe-Pan | 1 |
| 08***38 | Channel | 2 |
109-5627 Leveler Gp -40-Ft Grade Reference
| 08***77 | Adapter | 1 |
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 1G***70 | Extension-Curve | 1 |
109-5628 Leveler Gp -30-Ft Grade Reference
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 4 |
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 08***67 | Film-Warning; (No Step)(No Step) | 2 |
109-5623 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 7 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5626 Leveler Gp -Outboard
| 10***26 | Leveler Group; -Outboard | 1 |
| 11***35 | Plate & Film Group | 1 |
109-5625 Leveler Gp -30-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***25 | Leveler Group; -30-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5624 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***04 | Tube; (1.1-M) | 1 |
Hydraulic System
209-4549 Accumulator Gp-Hydraulic -Uncharged
| 08***56 | Nut | 2 |
| 12***47 | Hose As | 1 |
| 12***55 | Heat Exchanger | 1 |
207-4843 Accumulator Gp-Hydraulic -Uncharged
| 13***64 | Cap | 1 |
| 13***65 | Screw | 1 |
| 13***66 | Seal | 1 |
209-2659 Accumulator Gp-Hydraulic -Charged
| 07***32 | Filter Element-Breather; (Hydraulic Oil Filter) | 1 |
| 07***26 | Gasket | 2 |
| 07***12 | Fitting-Breather | 1 |
077-3951 Cap Gp-Hydraulic Oil Filler
| 07***51 | Cap As-Filler Breather | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
104-7462 Cooler Gp-Hydraulic Oil
| 10***62 | Cooler Group-Hydraulic Oil | 1 |
| 10***53 | Plug-Nylon | 1 |
| 13***62 | Seal-Wiper | 1 |
227-5098 Cooler Gp-Hydraulic Oil
| 13***21 | Kit-Seal; (Hopper Cylinder) | 1 |
| 22***98 | Cooler Group-Hydraulic Oil | 1 |
| 5E***32 | Ring | 1 |
203-4274 Cylinder Gp-Hydraulic -Screed Hoist
| 20***74 | Cylinder Group-Hydraulic; -Screed Hoist | 1 |
| 24***11 | Ring-Retaining | 1 |
| 25***75 | Kit-Seal; (Auger Hoist) | 1 |
174-3073 Cylinder Gp-Hydraulic -Auger, Lh
| 17***73 | Cylinder Group-Hydraulic; -Auger, Lh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 24***14 | Kit-Seal; (Auger Hoist) | 1 |
203-4275 Cylinder Gp-Hydraulic -Auger Hoist, Rh
| 20***75 | Cylinder Group-Hydraulic; -Auger Hoist, Rh | 1 |
| 24***73 | Ring-Retaining | 1 |
| 24***14 | Kit-Seal; (Auger Hoist) | 1 |
174-3072 Cylinder Gp-Hydraulic -Auger, Rh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 17***72 | Cylinder Group-Hydraulic; -Auger, Rh | 1 |
| 23***05 | Kit-Seal; (Screed Hoist Cylinder) | 1 |
241-1020 Cylinder Gp-Hydraulic
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 18***60 | Head | 1 |
203-4276 Cylinder Gp-Hydraulic -Auger Hoist, Lh
| 20***76 | Cylinder Group-Hydraulic; -Auger Hoist, Lh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 25***75 | Kit-Seal; (Auger Hoist) | 1 |
135-0220 Cylinder Gp-Hydraulic -Hopper
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 13***20 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 17***07 | Kit-Seal; (Hydraulic Cylinder) | 1 |
134-2561 Cylinder Gp-Hydraulic -Grade, Slope
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 07***85 | Washer | 1 |
| 11***60 | Shim; (3-mm Thk) | 1 |
241-1022 Cylinder Gp-Hydraulic
| 12***73 | Filter-Oil; (Standard Efficiency)(Oil) | 1 |
| 17***22 | Bowl | 1 |
| 17***23 | Seal | 2 |
177-0264 Filter Gp-Oil -Hydraulic, Conveyor
| 14***47 | Hose As | 2 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 10***62 | Cooler Group-Hydraulic Oil | 1 |
| 10***77 | Tank Group-Hydraulic | 1 |
| 11***77 | Lines Group-Screed Elevation | 1 |
237-9873 Hydraulic Ar
| 03***92 | Seal; (126.59mm Id) | 1 |
| 03***47 | Spacer | 3 |
| 06***51 | Clamp | 2 |
227-2540 Lines Gp-Brake & Shift
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 11***98 | Hose As | 1 |
| 15***21 | Hose As | 1 |
227-5085 Lines Gp-Conveyor
| 09***06 | Hose Assem. | 2 |
| 13***04 | Hose As | 2 |
| 13***61 | Cylinder Group-Hydraulic; -Grade, Slope | 2 |
227-5120 Lines Gp-Generator Drive
| 08***56 | Nut | 7 |
| 10***90 | Hose As | 1 |
| 10***41 | Hose As | 2 |
136-5865 Lines Gp-Grade & Slope
| 11***87 | Hose As | 1 |
| 13***65 | Lines Group-Grade & Slope | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
227-5087 Lines Gp-Hopper
| 10***39 | Key-Square | 1 |
| 14***51 | Valve-Flow Control; (Blower Motor) | 1 |
| 14***05 | Hose As | 1 |
227-5096 Lines Gp-Hydraulic
| 10***57 | Connector | 1 |
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
| 14***23 | Connector As. | 1 |
148-1516 Lines Gp-Paver Ventilation
| 10***79 | Pin | 4 |
| 11***55 | Hose As | 1 |
| 11***79 | Plate | 1 |
239-6858 Lines Gp-Screed Drive
| 10***79 | Pin | 4 |
| 11***55 | Hose As | 1 |
| 11***79 | Plate | 1 |
117-8177 Lines Gp-Screed Elevation
| 11***18 | Clip | 2 |
| 11***77 | Lines Group-Screed Elevation | 1 |
| 11***37 | Seat Cushion Kit, Hose As | 2 |
227-5114 Lines Gp-Shift
| 08***73 | Clamp | 4 |
| 11***61 | Tube As | 1 |
| 11***62 | Tube As | 1 |
209-2602 Lines Gp-Track Tension
| 08***73 | Clamp | 4 |
| 13***03 | Hose As | 1 |
| 13***04 | Hose As | 1 |
209-2652 Lines Gp-Truck Hitch
| 13***15 | Valve-Check | 2 |
| 20***52 | Lines Group-Truck Hitch | 1 |
| 7M***85 | Seal,Adapter,Motor Part Of Kit P/N 5r***29 | 6 |
107-0484 Lines Gp-Truck Hitch
| 10***21 | Plug | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***84 | Lines Group-Truck Hitch | 1 |
197-4575 Manifold Gp-Control -Propel
| 19***75 | Manifold Group-Control; -Propel | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
127-5435 Manifold Gp-Cooling
| 12***35 | Manifold Group-Cooling | 1 |
| 14***27 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
107-0002 Manifold Gp-Suction
| 10***02 | Manifold Group-Suction | 1 |
| 14***27 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
237-9866 Motor & Mtg Gp-Generator
| 03***28 | Seal-O-Ring | 1 |
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 4 |
| 09***97 | Washer, Spring | 6 |
197-1728 Motor Gp-Gear -Blower Fan
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 4 |
| 09***94 | Pin, Dowel | 1 |
| 12***35 | Shim | 1 |
227-5104 Motor Gp-Piston -Generator
| 03***92 | Seal; (126.59mm Id) | 1 |
| 14***45 | Connector As | 1 |
| 14***61 | Elbow Group | 1 |
223-0581 Motor Gp-Piston -Drag Conveyor-Drag Conveyor, Auger Conveyor
| 03***92 | Seal; (126.59mm Id) | 1 |
| 22***81 | Motor Group-Piston; -Drag Conveyor-Drag Conveyor, Auger Conveyor | 1 |
| 22***06 | Mount As | 1 |
194-4779 Motor Gp-Piston -Propel
| 10***78 | Bearing-Roller | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
237-9869 Mounting Gp-Pump
| 23***69 | Mounting Group-Pump | 1 |
| 24***41 | Kit-Solenoid Valve; (Screed Gear Pump) | 1 |
| 26***42 | Kit-Seal | 1 |
227-5119 Pump & Mtg Gp-Generator
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 2 |
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 8 |
| 05***33 | Seal | 1 |
267-9475 Pump Gp-Gear -Screed
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 1 |
207-2948 Pump Gp-Piston -Propel
| 00***54 | Cup-Roller Bearing | 1 |
| 10***79 | Cone-Bearing | 1 |
| 12***22 | Bolt; (M14x2x50-mm) | 4 |
154-6613 Pump Gp-Piston -Drag Conveyor, Auger Conveyor
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 07***53 | Pin; (Spring) | 2 |
201-7363 Pump Gp-Piston -Propel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
154-6612 Pump Gp-Piston -Drag Conveyor, Auger Conveyor
| 15***12 | Pump Group-Piston; -Drag Conveyor, Auger Conveyor | 1 |
| 20***47 | Pump Group-Piston; -Propel | 1 |
| 20***48 | Pump Group-Piston; -Propel | 1 |
207-2947 Pump Gp-Piston -Propel
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 07***53 | Pin; (Spring) | 2 |
8i-0836 Pump Gp-Piston -Auxiliary
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 2 |
239-1490 Pump Gp-Piston -Generator
| 00***55 | Ring-Retaining | 1 |
| 23***90 | Pump Group-Piston; -Generator | 1 |
| 3T***49 | Bolt-Socket Hd; (M6 X 1.0 X 25) | 4 |
134-5293 Rotating Gp-Motor -Propel Piston Motor
| 00***83 | Ring-Snap | 1 |
| 13***93 | Rotating Group-Motor; -Propel Piston Motor | 1 |
| 9T***57 | Pin | 3 |
6e-6569 Rotating Gp-Pump
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***26 | Tank Group-Hydraulic | 1 |
| 12***00 | Plate | 1 |
9t-2031 Rotating Gp-Pump
| 00***15 | Nipple-Pipe; (59.4mm Long) | 1 |
| 07***51 | Cap As-Filler Breather | 1 |
| 10***40 | Tank As-Hydraulic | 1 |
111-1326 Tank Gp-Hydraulic
| 03***53 | Seal-O-Ring; (08.92mm Id) | 2 |
| 11***26 | Tank Group-Hydraulic | 1 |
| 11***16 | Kit-Seal; (Counterbalance Valve) | 1 |
104-8677 Tank Gp-Hydraulic
| 10***77 | Tank Group-Hydraulic | 1 |
| 11***18 | Clip | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 4 |
227-5121 Valve & Mtg Gp-Control
| 21***56 | Cartridge As-Valve | 1 |
| 21***57 | Kit-Seal | 1 |
| 21***58 | Knob; (Hand) | 1 |
187-6155 Valve & Mtg Gp-Relief
| 08***80 | Case As | 4 |
| 08***83 | Body | 2 |
| 08***85 | Spring | 4 |
215-3511 Valve Gp-Accumulator Charging
| 11***21 | Valve Group-Solenoid; (Propel Control Manifold) | 1 |
| 13***03 | Valve Group-Solenoid; (Grade & Slope) | 1 |
| 15***80 | Coil | 2 |
134-4720 Valve Gp-Bank
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***29 | Nut-Retaining | 2 |
| 10***33 | Valve-Check | 1 |
227-5105 Valve Gp-Control -Generator
| 07***27 | Kit-Seal; (Counterbalance Valve) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 12***16 | Solenoid As | 2 |
191-6578 Valve Gp-Control -Hopper
| 19***78 | Valve Group-Control; -Hopper | 1 |
| 25***76 | Valve Group-Control | 1 |
| 25***79 | Valve As-Needle | 1 |
254-0776 Valve Gp-Control
| 10***18 | Seal-O-Ring | 2 |
| 10***04 | Seal-O-Ring | 1 |
| 11***73 | Orifice | 1 |
216-7961 Valve Gp-Control -Conveyor
| 21***61 | Valve Group-Control; -Conveyor | 1 |
| 25***77 | Kit-Seal; (Generator Control Valve) | 1 |
| 27***89 | Coil-Solenoid; (Solenoid Valve) | 1 |
169-0166 Valve Gp-Counterbalance
| 10***17 | Seal-O-Ring | 2 |
| 10***18 | Seal-O-Ring | 2 |
| 10***04 | Seal-O-Ring | 1 |
194-8505 Valve Gp-Flushing -Vibratory Piston Motor
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 12***32 | Setscrew-Socket; (M8x1.25x45-mm) | 2 |
134-5294 Valve Gp-Flushing -Propel Motor
| 13***94 | Valve Group-Flushing; -Propel Motor | 1 |
| 17***45 | Kit-Seal; (Pressure Reducing Valve) | 1 |
| 17***46 | Valve | 1 |
168-8609 Valve Gp-Pressure Reducing -Truck Hitch
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 12***08 | Gasket-Control | 1 |
| 16***09 | Valve Group-Pressure Reducing; -Truck Hitch | 1 |
214-7732 Valve Gp-Pump Control
| 12***08 | Gasket-Control | 2 |
| 15***10 | Kit-Relief Valve; (Pressure Limiter)(Propel Piston Pump) | 4 |
| 17***17 | Seal-O-Ring | 1 |
257-5145 Valve Gp-Pump Control -Auxiliary Pump
| 10***73 | Console Group-Operator | 1 |
| 25***45 | Valve Group-Pump Control; -Auxiliary Pump | 1 |
152-7576 Valve Gp-Pump Control -Conveyor
| 15***76 | Valve Group-Pump Control; -Conveyor | 1 |
| 4J***33 | Seal Fuel Injection Pump | 1 |
| 5L***58 | Seal 14 mm(.551 In.) I. D. | 1 |
176-3200 Valve Gp-Relief
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 4 |
| 03***49 | Nut-Self Lock; (No.10.Unc) | 4 |
| 08***53 | Bolt; (3/8-16x0.625-In)(3/8-16-2a Thd) | 2 |
Implements
243-1863 Extension Ar-Auger
| 1A***68 | Nut | 4 |
| 20***59 | Plate | 1 |
| 20***63 | Frame As | 1 |
185-5433 Extension Ar-Auger
| 10***95 | Bearing | 2 |
| 10***12 | Shaft As-Vibratory | 1 |
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
245-9081 Extension Gp-Screed -Electric Heat, 12-In
| 10***95 | Bearing | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
247-0570 Extension Gp-Screed
| 16***77 | Hitch Group-Truck | 1 |
| 20***52 | Lines Group-Truck Hitch | 1 |
| 24***70 | Extension Group-Screed | 1 |
247-0575 Extension Gp-Screed
| 14***18 | Connector As | 1 |
| 16***05 | Connector As | 1 |
| 16***76 | Hitch Group-Truck; -Oscillating | 1 |
247-0567 Extension Gp-Screed
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 21***53 | Extension Group-Main Frame | 1 |
| 24***81 | Extension Group-Screed; -Electric Heat, 12-In | 2 |
245-9082 Extension Gp-Screed -Electric Heat With Vibration, 28-In
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***14 | Extension Group-Main Frame; -1 Ft | 6 |
| 11***09 | Bearing Group-Auger | 2 |
247-0568 Extension Gp-Screed
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 11***09 | Bearing Group-Auger | 2 |
| 11***10 | Extension Group-Main Frame | 1 |
247-0574 Extension Gp-Screed
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
245-9083 Extension Gp-Screed -Electric Heat, 12-In
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 10***15 | Extension Group-Main Frame; -2 Ft | 2 |
| 11***09 | Bearing Group-Auger | 2 |
245-9084 Extension Gp-Screed -Electric Heat With Vibration, 24-In
| 10***14 | Extension Group-Main Frame; -1 Ft | 6 |
| 10***15 | Extension Group-Main Frame; -2 Ft | 2 |
| 11***09 | Bearing Group-Auger | 2 |
209-2655 Hitch Ar-Truck
| 10***84 | Lines Group-Truck Hitch | 1 |
| 16***77 | Hitch Group-Truck | 1 |
| 20***55 | Hitch Ar-Truck | 1 |
166-7676 Hitch Gp-Truck
| 11***58 | Screw; 12-Point Screw, Screw, Roller Group-Push | 1 |
| 16***76 | Hitch Group-Truck; -Oscillating | 1 |
| 5C***66 | Bolt (25 mm Long); (5/8-11x1-In) | 1 |
166-7677 Hitch Gp-Truck
| 09***55 | Washer; (39x72x1.5-mm Thk) | 10 |
| 11***57 | Roller As | 1 |
| 16***77 | Hitch Group-Truck | 1 |
116-5903 Installation Ar-Truck Hitch
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 11***03 | Installation Ar-Truck Hitch | 1 |
| 24***28 | Seal | 1 |
102-4646 Roller Ar-Push
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 10 |
| 08***15 | Cushion-Rubber | 2 |
| 10***46 | Roller Ar-Push | 1 |
118-8358 Roller Gp-Push
| 11***58 | Screw; 12-Point Screw, Screw, Roller Group-Push | 1 |
| 18***74 | Plate | 1 |
| 7T***99 | Link | 3 |
112-1276 Shaft Gp-Drive -Eccentric Weight
| 10***63 | Clamp | 1 |
| 11***95 | Plug | 1 |
| 11***63 | Cable; (Coiled) | 1 |
Lubrication System
131-4810 Breather Gp -Crankcase
| 13***10 | Breather Group; -Crankcase | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 4P***36 | Base | 1 |
103-0803 Filler Gp-Engine Oil
| 10***03 | Filler Group-Engine Oil | 1 |
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
| 6L***09 | Seal-Rubber | 1 |
4p-8183 Filter Gp-Engine Oil
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 23***54 | Gasket | 1 |
| 24***64 | Spring; (Yoke) | 2 |
7w-8420 Fumes Disposal Gp
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 1 |
| 7C***52 | Hose-Disposal; (Fumes)(Fumes) | 1 |
110-9674 Gauge Gp-Oil Level (Dipstick)
| 11***74 | Gauge Group-Oil Level (Dipstick) | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 4P***56 | Gauge-Oil Level (Dipstick) | 1 |
4w-2914 Lines Gp-Engine Oil
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
| 4W***14 | Lines Group-Engine Oil | 1 |
4p-7703 Lines Gp-Turbocharger Oil
| 11***19 | Tube As | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 1S***57 | Gasket; (Turbocharger-Oil Supply) | 1 |
115-4138 Pump Gp-Engine Oil
| 11***38 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
200-4497 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
103-9408 Valve Gp-Fluid Sampling -Coolant
| 10***08 | Valve Group-Fluid Sampling; -Coolant | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
Machine Arrangement
237-9369 Common Ar -Ap-1055b
| 10***48 | Seat Group | 1 |
| 10***49 | Console Ar | 1 |
| 11***64 | Finish Ar | 1 |
237-9370 Common Ar -Bg-2455c
| 10***48 | Seat Group | 1 |
| 10***49 | Console Ar | 1 |
| 11***65 | Finish Ar | 1 |
237-9371 Generator Ar-Hydraulic -Without Ventilation
| 22***19 | Pump & Mtg Group-Generator | 1 |
| 22***20 | Lines Group-Generator Drive | 1 |
| 22***21 | Valve & Mtg Group-Control | 1 |
227-5118 Generator Ar-Hydraulic -With Ventilation
| 14***16 | Lines Group-Paver Ventilation | 1 |
| 22***18 | Generator Ar-Hydraulic; -With Ventilation | 1 |
| 22***19 | Pump & Mtg Group-Generator | 1 |
Operator Station
104-7449 Console Ar
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***49 | Console Ar | 1 |
| 11***81 | Kit-Gauge Housing | 1 |
104-7473 Console Gp-Operator
| 10***73 | Console Group-Operator | 1 |
| 16***01 | Horn As; (24-Volt, Low Tone) | 1 |
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 1 |
114-0322 Gauge Gp-Cluster
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
104-7454 Horn & Alarm Gp
| 10***54 | Horn & Alarm Group | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 5 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 5 |
132-3090 Lever Gp-Propel
| 13***90 | Lever Group-Propel | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 19***81 | Circuit Breaker As; (35-Ampere)(Generator) | 1 |
199-8398 Module Gp-Speedometer & Tach
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 07***00 | Switch As-Toggle; (Starter Engine Battery Charger) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
232-6389 Panel Gp-Control
| 10***47 | Pin | 2 |
| 11***11 | Armrest As | 2 |
| 16***22 | Plate | 1 |
232-6371 Panel Gp-Instrument
| 17***72 | Seat Group | 1 |
| 23***71 | Panel Group-Instrument | 1 |
104-7470 Platform Gp
| 10***70 | Platform Group | 1 |
| 19***76 | Kit-Armrest; (Lh) | 1 |
| 19***77 | Kit-Armrest; (Rh) | 1 |
104-7448 Seat Gp
| 10***68 | Grip-Handle | 2 |
| 10***48 | Seat Group | 1 |
| 10***41 | Umbrella Group; -Bg-225c | 1 |
119-1784 Seat Gp
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 08***11 | Ring | 2 |
| 10***12 | Bracket As-Motor | 1 |
170-5472 Seat Gp
| 17***72 | Seat Group | 1 |
138-7139 Steering Column Gp
| 13***39 | Steering Column Group | 1 |
106-8541 Umbrella Gp
| 0T***56 | Bolt (2 1/2" Long) | 20 |
| 10***41 | Umbrella Group; -Bg-225c | 1 |
| 13***95 | Bolt; (3/4-10x2 1/4-In) | 16 |
187-6649 Umbrella Gp
| 14***91 | Filter-Oil; (Advanced Efficiency) | 1 |
| 18***49 | Umbrella Group; -Ap-650b | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
Power Train
7x-5312 Filter Gp-Oil -Hydraulic
| 03***73 | Bolt; (3/8-16x1.5-In) | 2 |
| 03***92 | Seal; (126.59mm Id) | 1 |
| 08***56 | Nut | 2 |
128-2482 Filter Gp-Oil
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 12***82 | Filter Group-Oil; -Propel | 1 |
| 15***84 | Cone | 2 |
226-0801 Final Drive Gp
| 07***92 | Filter-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 22***01 | Final Drive Group | 1 |
239-6853 Lines Gp-Propel
| 10***79 | Pin | 2 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
| 15***28 | Hose As | 2 |
272-7276 Planetary Gp-Final Drive
| 01***41 | Setscrew-Socket | 3 |
| 27***76 | Planetary Group-Final Drive | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
Service Equipment And Supplies
116-4565 Finish Ar
| 11***65 | Finish Ar | 1 |
| 15***38 | Plate-Warning; (Operating Instructions) | 1 |
| 15***59 | Film; (Conveyor Control Module) | 1 |
116-4564 Finish Ar
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 4 |
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 08***67 | Film-Warning; (No Step)(No Step) | 2 |
7r-4741 Lines Gp-Spray Down
| 15***38 | Plate-Warning; (Operating Instructions) | 1 |
| 15***59 | Film; (Conveyor Control Module) | 1 |
| 15***65 | Film; (Propel Ecm) | 1 |
239-3575 Plate & Film Gp -French
| 08***89 | Reel Group-Washdown Hose | 1 |
| 16***62 | Plate | 1 |
| 17***44 | Hose As | 1 |
239-3576 Plate & Film Gp -English
| 23***76 | Plate & Film Group; -English | 1 |
116-5236 Plate & Film Gp
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
| 08***52 | Decal-Caution, Hopper Support | 2 |
| 11***96 | Plate-Warning; (Operating Instructions) | 1 |
239-3579 Plate & Film Gp -English
| 23***79 | Plate & Film Group; -English | 1 |
116-5235 Plate & Film Gp
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
| 08***52 | Decal-Caution, Hopper Support | 2 |
| 11***96 | Plate-Warning; (Operating Instructions) | 1 |
239-3574 Plate & Film Gp -French
| 17***28 | Fitting-Swivel | 1 |
| 17***29 | Seal-V-Ring | 1 |
| 19***04 | Kit-Repair; (Washdown Hose Reel Lock) | 1 |
137-0197 Reel Gp-Washdown Hose
| 13***97 | Reel Group-Washdown Hose | 1 |
087-0889 Reel Gp-Washdown Hose
| 08***89 | Reel Group-Washdown Hose | 1 |
Slope And Grade Control
119-1766 Beam Gp-Transverse
| 11***43 | Mounting Group-Control; -Topcon Control System | 2 |
| 11***29 | Cap-Dust | 1 |
| 11***66 | Beam Group-Transverse | 1 |
194-9341 Beam Gp-Transverse
| 14***22 | Cover | 1 |
| 14***25 | Seal-Bushing | 1 |
| 14***26 | Gasket | 1 |
168-6500 Cable Gp-Control -Grade
| 11***29 | Cap-Dust | 1 |
| 12***36 | Bracket-Mounting | 2 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
207-8265 Control Gp-Grade & Slope
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
194-6990 Control Gp-Grade & Slope -Premier Control System
| 11***10 | Screw-Pan Head | 8 |
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
123-0885 Control Gp-Grade & Slope -Premier Control System
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***97 | Plug | 1 |
209-3125 Control Gp-Grade & Slope
| 13***89 | Support As; (Sensor) | 1 |
| 20***25 | Control Group-Grade & Slope | 1 |
| 25***04 | Spacer | 4 |
209-3130 Control Gp-Grade & Slope
| 11***93 | Bracket | 1 |
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 18***44 | Jack Group-Height Adjuster | 1 |
239-2367 Control Gp-Grade & Slope
| 11***93 | Bracket | 1 |
| 12***91 | Sensor Group-Sonic; -Grade | 1 |
| 18***44 | Jack Group-Height Adjuster | 1 |
168-5031 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***97 | Plug | 1 |
209-3129 Control Gp-Grade & Slope
| 13***50 | Mount As | 2 |
| 18***61 | Bracket | 1 |
| 20***29 | Control Group-Grade & Slope | 1 |
112-4043 Mounting Gp-Control -Topcon Control System
| 11***43 | Mounting Group-Control; -Topcon Control System | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 12***99 | Arm-Follower | 1 |
135-3860 Mounting Gp-Control -Premier Control System
| 11***29 | Cap-Dust | 1 |
| 13***60 | Mounting Group-Control; -Premier Control System | 1 |
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
185-4064 Sensor Ar-Grade -Premier Control System
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
185-4061 Sensor Ar-Grade -Premier Control System
| 11***29 | Cap-Dust | 1 |
| 14***16 | Faceplate | 1 |
| 14***17 | Bracket | 1 |
122-0095 Sensor Gp-Grade -Sonic
| 12***95 | Sensor Group-Grade; -Sonic | 1 |
| 17***32 | Film-Identification; (Tow Point Indicator) | 2 |
| 17***73 | Plate | 2 |
122-0094 Sensor Gp-Grade
| 12***94 | Sensor Group-Grade | 1 |
| 12***95 | Sensor Group-Grade; -Sonic | 1 |
| 13***83 | Cable As | 1 |
209-3132 Sensor Gp-Grade -Averaging Ski
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
122-0090 Sensor Gp-Grade -Averaging Ski
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
209-3131 Sensor Gp-Grade -Sonic
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
122-0091 Sensor Gp-Sonic -Grade
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***29 | Shoe As | 4 |
Undercarriage
206-5963 Bogie Gp
| 13***57 | Midroller Group | 2 |
| 14***76 | Bearing | 2 |
| 17***26 | Shaft | 1 |
206-5976 Frame Gp-Track Roller
| 20***76 | Frame Group-Track Roller | 1 |
| 28***75 | Collar | 4 |
| 28***77 | Tube | 2 |
206-5957 Frame Gp-Track Roller -Lh
| 10***59 | Bearing-Sleeve | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 1 |
| 17***81 | Cover | 1 |
206-5956 Frame Gp-Track Roller -Rh
| 13***57 | Midroller Group | 2 |
| 14***76 | Bearing | 2 |
| 17***26 | Shaft | 1 |
206-5959 Frame Gp-Track Roller
| 05***03 | Washer; (40.46x69.85x7.37-mm Thk) | 1 |
| 10***79 | Cover As | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
206-5978 Frame Gp-Track Roller
| 03***53 | Ring-Retaining | 2 |
| 05***58 | Stud | 24 |
| 10***59 | Bearing-Sleeve | 2 |
206-5958 Frame Gp-Track Roller -Rear, Rh
| 10***59 | Bearing-Sleeve | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 1 |
| 17***81 | Cover | 1 |
136-5157 Midroller Gp
| 03***53 | Ring-Retaining | 2 |
| 10***59 | Bearing-Sleeve | 2 |
| 10***18 | Plate | 2 |
239-2366 Mounting Gp-Averaging Ski
| 20***56 | Frame Group-Track Roller; -Rh | 1 |
| 20***57 | Frame Group-Track Roller; -Lh | 1 |
| 22***01 | Final Drive Group | 2 |
206-5965 Tensioner Gp-Track
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 20***65 | Tensioner Group-Track | 1 |
| 21***53 | Extension Group-Main Frame | 4 |
209-2438 Undercarriage Ar
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
BG-2455C serial number reference
The PIN plate on this paver is riveted to the main frame, generally near the operator's platform or engine compartment on Cat-era tracked pavers from this period. The PIN reads as a 3-letter plant/sequence prefix followed by a numeric unit sequence (e.g. 6TN00512); the letter prefix identifies the production block, not the model, so always match it against the model-specific parts book rather than a generic Caterpillar prefix chart.
| Prefix | Identifies | Notes |
|---|---|---|
| 6TN | BG-2455C / AP-1055B dual-badge asphalt paver, 3116 engine | earliest documented production block for this paver; parts book and service manual coverage starts at 6TN00001-UP; same physical machine sold as Cat AP-1055B and Barber-Greene BG-2455C |
| A3P | BG-2455C / AP-1055B dual-badge asphalt paver, 3116 engine | tied directly to the combined AP-1055B/BG-2455C machine listing, starts at A3P00001-UP |
| B2G | BG-2455C / AP-1055B dual-badge asphalt paver, 3116 engine | electrical/generator group parts listing names the combined AP-1055B/BG-2455C machine directly, starts at B2G00001-UP |
| ABB | BG-2455C / AP-1055B dual-badge asphalt paver, 3116 engine | electrical group parts listing names the combined AP-1055B/BG-2455C machine directly, starts at ABB00001-UP |
| ACM | BG-2455C / AP-1055B dual-badge asphalt paver, 3116 engine | parts catalog listing under the BG-2455C model heading names the combined AP-1055B/BG-2455C machine, starts at ACM00001-UP |
Frequently asked questions
What engine does the Caterpillar BG-2455C paver use?
The BG-2455C runs a Caterpillar 3116TA turbocharged inline-six diesel, 6.6L displacement, rated 174 hp (130 kW) at 2200 rpm. It is a mechanical HEUI-injection engine with an ECM on the engine only; the paver itself has no separate digital operator dash.
What is the operating weight of the BG-2455C?
Operating weight without screed is 16,101 kg (35,501 lb). Total weight varies with screed configuration, since bolt-on extensions widen the paving width from 2.44m (8ft) up to 9.14m (30ft).
What replaced the Caterpillar BG-2455C?
No direct successor under the Barber-Greene nameplate is documented. Caterpillar carried the paver platform forward under the AP nameplate instead, through AP-1055D and later the C7.1-powered AP1055, rather than issuing a BG-2455D.
What BG-2455C owners discuss
What hydraulic or powertrain issues come up in service for the BG-2455C's feeder and auger system?
Caterpillar issued a factory support action adding purging lines to the feeder hydraulic manifold on this platform, covering the AP-1050B/AP-1055B and Barber-Greene BG-225C/BG-245C/BG-260C/BG-2455C family, aimed at bleeding trapped air that caused stalling and erratic hydraulic behavior. A separate factory action addressed conveyor stalling paired with valve-spring breakage on the AP-1050B/AP-1055B and BG-245C/BG-2455C twins specifically, pointing to marginal valve-spring tolerances feeding intermittent conveyor-drive stalls under load. Anyone chasing a stalling feed system on this machine should check the manifold bleed and valve-spring condition before assuming a control or electrical fault. Have your dealer verify any hydraulic manifold rework and valve-spring spec against the bulletin for your serial-number range.
What undercarriage or track wear patterns are typical on this machine?
The rubber-padded steel track undercarriage (roughly 457mm/18in pad width) on this paver was the subject of two dedicated factory support actions: one for improving undercarriage performance and correcting belt-tracking drift, another for replacing the tracking lever/bar on the track roller frame. Both point at the same underlying complaint — tracks wandering out of alignment or needing frequent manual re-tracking during a pour, traced to the roller-frame tracking linkage rather than the pads themselves. Expect routine track tensioning and inspection, and treat uneven pad wear side-to-side as an early sign the tracking bar needs attention rather than a pad-only problem. Have your dealer verify tracking-bar geometry before committing to a full undercarriage rebuild.
What quirks does the turbocharged 3116 show in this paver application?
The 3116TA shares the aftercooler-fouling tendency documented across the 3116/3126 family: blow-by oil mist drawn into the turbo cokes onto the aftercooler's air side, worsened by extended periods at low rpm — a duty cycle this paver sees regularly while idling between truck loads or holding at a joint. Caterpillar's fix is running the factory-specified straight-grade oil rather than a multi-viscosity blend, since the viscosity-index-improver additives in multigrade oil are the material that cokes onto the cooler core. Symptoms build gradually as reduced power and increasing black smoke rather than appearing as a sudden failure. Have your dealer verify aftercooler condition and oil-spec compliance any time a power-loss or smoke complaint comes in.
What electrical or sensor issues are typical on the BG-2455C?
This paver predates the electronic-controlled paver generation, so its electrical system is a conventional gauge cluster, charging/starting circuit, and a handful of point sensors rather than a full engine-control network with fault codes. Field complaints on this platform's electrical system center on the gauge-cluster and instrument-panel wiring — connector corrosion and harness chafing at the panel mount show up more often than any sensor logic failure. With no diagnostic service tool to lean on, troubleshooting is done with a multimeter against the machine's wiring schematic. Have your dealer verify harness continuity and connector condition before replacing a gauge or sending unit as a first guess.
How does the screed hold up over time and what should be checked?
Screed plates on this class of paver start at roughly 12.7mm (1/2in) thick; a plate worn down to near 6.4mm (1/4in) still has usable life left but is approaching replacement. The standard field check is measuring plate thickness at all four corners, front and rear, both sides — uneven thickness side-to-side signals the screed has fallen out of alignment rather than simple wear. Heating elements should also be checked for even temperature across zones, since a cold spot on the plate telegraphs straight into the finished mat. Have your dealer verify screed alignment and heater-zone balance whenever plate wear reads uneven.
What should a buyer check before purchasing a used BG-2455C?
Walk the undercarriage first given this platform's documented tracking-bar and belt-tracking history — look for uneven pad wear and confirm the tracking linkage holds alignment during a test run instead of wandering. Measure screed plate thickness at all four corners and confirm heating-zone uniformity. Run the engine and watch for sluggish power response or black smoke that could signal aftercooler fouling, and load the feeder/auger hydraulics to check for stalling given this family's manifold and valve-spring history. Grab the auger to check for bearing play and inspect conveyor chain condition and hopper wear. Ask for maintenance records and confirm the oil in use matches the factory straight-grade spec rather than a multi-viscosity blend. Have your dealer run a full pre-purchase inspection against current serial-number-specific bulletins before closing the sale.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific BG-2455C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.