Caterpillarasphalt paver
Caterpillar BG-230D
Maintenance schedule, common problems & OEM parts breakdown
The Cat BG-230D is a medium-size, rubber-tire (wheel) asphalt paver built for new construction, overlay, and maintenance paving on highways, urban and rural roads, airports, industrial sites, and large parking lots. It runs a Cat 3054C turbocharged diesel rated around 130 hp (97 kW) at 2200 rpm, driving a fully hydrostatic propel system with four speed ranges and anti-slip wheel traction control. Operating weight for this paver class runs roughly 12,000-13,600 kg (26,500-30,000 lb) depending on screed and configuration; treat the exact figure as configuration-dependent rather than a single fixed number. Cat introduced the BG-230D around 2006 as an update to the earlier BG-230, and the same machine was also sold under the AP-800D designation, carrying the B4G and A5P serial prefixes. It shipped with a choice of Extend-A-Mat 8-16B or AS2251 screeds, each available with diesel or electric heat, plus an optional generator and auxiliary power panel. No documented model carries the BG-230D name forward as a direct one-for-one successor.
The move from BG-230 to BG-230D swapped the earlier lower-output 3054 engine for the turbocharged 3054C, lifting horsepower and adding outboard feeder drives that pull the feeder motor away from hopper heat for better material flow and easier service. Hydraulically adjustable augers, electronic self-diagnostics on the propel and feeder systems, and the optional generator/auxiliary power panel rounded out the update. In today's used and parts market the BG-230D still turns up on mid-size paving jobs where its 3054C engine, hydrostatic drivetrain, and screed options are well understood and commonly serviced. Because Cat marketed the machine under both the BG-230D and AP-800D names, parts and service literature frequently cross-list under either designation, which is useful when sourcing components. Its engine family (3054/3054C) is shared broadly across Cat industrial and paver lines, keeping basic engine parts accessible, but buyers should confirm availability of paver-specific items such as screed heater elements, hydrostatic wheel motor seals, and feeder drive components before committing, since Cat's current wheeled-paver lineup does not include a named direct replacement for this model.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar BG-230D specifications
Engine
| Engine model | Cat 3054C turbocharged diesel |
| Gross power | 130 hp (97 kW) at 2,200 rpm |
| Engine type | Small-bore turbocharged diesel |
| Auxiliary generator | Tractor-mounted generator, operates at 1,800 rpm, powers the electric screed and optional auxiliary power panel; auxiliary panel supplies about 10.8 hp (8 kW) to four 120V and two 240V receptacles |
| Displacement / cylinders / emissions tier | Not documented for this specific generation — verify with your dealer |
Weights
| Operating weight | Not documented for this exact generation — verify with your dealer. Note: the earlier, undashed BG230 (Cat 3054DIT engine, 107 hp) lists an operating weight without screed near 26,900 lb (12,200 kg), but that is a different engine generation and should not be assumed to carry over to the BG-230D |
| Shipping weight | Not documented |
| Ground pressure | Not published |
Dimensions
| Transport length/width/height | Not documented for this exact generation — verify with your dealer |
| Wheelbase | Not documented for this exact generation |
| Ground clearance | Not published |
| Operator station travel | Operator station slides 30 cm (12 in) beyond either edge of the paver; operator seat swivels 15 cm (6 in) left or right |
Performance
| Propel system | Fully hydrostatic propel system with four speed ranges for precise control across travel and paving conditions; wheel-controlled steering with independent propel speed and anti-slip control that lets the opposite drive wheel take over if one wheel slips |
| Travel speed (max) | Not documented for this exact generation — verify with your dealer |
| Paving width / paving speed | Not documented for this exact generation — verify with your dealer |
| Auger | Hydraulically adjustable augers, standard; augers raise for extra clearance when loading or unloading the paver onto a transport trailer. Outboard feeder drives place the feeder drive motor outside the mainframe, away from the feeder tunnel and asphalt heat, for better material flow to the augers and easier service access |
| Screed options | Extend-A-Mat 8-16B screed or AS2251 screed, each available with diesel or electric heat |
Service capacities (summary)
| Fuel tank | Not documented for this exact generation |
| Hydraulic system | Not documented for this exact generation |
| Engine oil | Not documented; standard oil-change interval is 500 hours |
| Cooling system | Electronically controlled variable-speed cooling fan; fluid capacity not documented |
| Electrical system | 24-volt DC system with two 12-volt batteries and a 55-amp alternator |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
BG-230D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | approx. 10-13 L (10.6-13.7 US qt), varies by configuration/series | Cat DEO (Diesel Engine Oil) 15W-40 for standard ambient range; Cat DEO Cold Weather or Cat DEO-ULS Synthetic for cold-climate starts; commercial heavy-duty diesel oil API CH-4/CI-4 or better accepted as alternative |
| Cooling system | approx. 19-21 L (5.0-5.5 US gal), varies by configuration/series | Cat ELC (Extended Life Coolant) or Cat DEAC (Diesel Engine Antifreeze/Coolant), rated to roughly -37 C (-34 F) protection |
| Fuel tank | approx. 189 L (50 US gal), varies by configuration/series | No. 2-D diesel fuel for normal service; No. 1-D diesel fuel in cold-climate operation |
| Hydrostatic propel / hydraulic system (tank and circuit combined) | approx. 113-189 L (30-50 US gal), varies widely by generation/configuration - not confirmed for this exact D-series serial range, verify with dealer/OMM | Cat TDTO (Transmission/Drive Train Oil) SAE 10W-30 multigrade as the Cat-brand equivalent for the hydrostatic drive circuit; Cat HYDO Advanced 10 or 30 for the implement hydraulic circuit. Earlier machines in this paver family called for a Dexron/Type-F automatic-transmission-fluid-spec oil in place of standard Cat hydraulic oil - confirm which spec applies to this serial range before filling |
| Final drive / pump-drive gear compartments | fill to level per OMM sight gauge - no confirmed liter figure for this model | Cat TDTO or a GL-5 80W-90 multipurpose gear lubricant; shorter service interval than the main engine oil change |
| Grease points | spec only, no reservoir capacity | Cat Multipurpose grease (MPGM), NLGI 1 for standard-temperature service; extreme-cold-climate NLGI 0 grade where required |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar BG-230D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the BG-230D beyond the schedule
Predictive Maintenance & Fluid Analysis
Run regular oil analysis on the 3054C engine, hydrostatic hydraulic system, and auger/conveyor gearboxes. Because the hydrostatic propel system pushes all four speed ranges through one closed loop, contamination shows up quickly as wheel-motor drift, uneven tracking, or loss of anti-slip control. Trend coolant samples to catch turbocharger-related overheating early. Log auger flighting and conveyor chain wear at every interval; segregation and mat-quality complaints usually trace back to worn feed components well before the drivetrain shows measurable wear.
Corrective & Common Repairs
Typical BG-230D repairs center on screed plate and auger flighting wear, stretched conveyor chains, and hydrostatic wheel motor seal leaks. The outboard feeder drive motor is exposed to asphalt heat and fines bypassing the chain cover, so inspect and reseal it proactively rather than waiting for failure. Steering-wheel-to-hydrostatic-linkage wear can cause propel drift under load. Screed heater element and thermostat faults show up as uneven mat temperature, especially on the Extend-A-Mat 8-16B extension sections.
Overhaul & Rebuild Points
Plan hydrostatic pump and wheel motor rebuilds once oil-analysis trends or propel performance loss point to internal wear; this is the highest-cost drivetrain component on the BG-230D. Auger and conveyor gearboxes warrant internal inspection at extended intervals. Check the mainframe and screed mounting points for stress cracking, since the fully hydrostatic 4-range drive and tow-behind screed both load these areas heavily. Turbocharger rebuild on the 3054C follows boost-leak or shaft-play findings from routine inspection.
Seasonal & Environment Servicing
Cold-weather prep: verify coolant concentration, use a winter-blend diesel fuel or approved additive, and check hydraulic oil viscosity before hydrostatic startup in low ambient temperatures. Hot-weather and high-dust paving jobs demand more frequent radiator and hydraulic oil cooler screen cleaning plus shorter air filter service intervals, since asphalt fines and dust load these areas fast. Check screed heater thermostats for nuisance overheat trips when ambient temperatures run high alongside mat heat.
BG-230D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 119-0073 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 1R-1804 | Filter Element-Wtr Sep & Fuel | Fuel system service | Check fitment → |
| 207-2757 | Seal | Fuel system service | Check fitment → |
| 206-5234 | Filter Element As-Air | Air intake service | Check fitment → |
| 206-5235 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
BG-230D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Engine Oil Pressure warning lamp (red) | Engine oil pressure has dropped below the safe minimum for the operating rpm. | Low oil level, plugged oil filter, worn oil pump, or a failed oil pressure sender. | Stop the engine at once, check oil level and filter condition before restarting. |
| Engine Coolant Temperature warning lamp (red) | Engine coolant temperature has exceeded the safe operating range. | Low coolant, blocked radiator fins, failed thermostat, or a slipping/failed fan drive. | Reduce load and idle down; shut the engine off if the lamp stays lit, then check coolant level and radiator once cool. |
| Coolant Level warning lamp | Coolant level in the recovery bottle or radiator has dropped below the sensor's minimum mark. | External coolant leak, failed hose or radiator cap, or routine top-off need. | Inspect for visible leaks and top off with the correct coolant mix once the engine has cooled. |
| Alternator/Charging System warning lamp | The charging system is not supplying adequate voltage to the battery. | Worn or broken drive belt, failed alternator, or a loose/corroded wiring connection. | Check belt tension and battery terminal condition, then test alternator output. |
| Air Filter Restriction indicator | Intake air filter restriction has reached the service limit. | Clogged primary or secondary air filter element from dusty paving-site operation. | Service or replace the air filter element and reset the restriction indicator. |
| Fuel Level warning lamp | Fuel level in the tank is low. | Tank near empty from normal use. | Refuel promptly; bleed the fuel system if the tank was run completely dry. |
| Hydraulic Oil Temperature warning lamp | Hydraulic oil temperature in the hydrostatic propel/screed circuit is above the safe limit. | Low hydraulic fluid level, a clogged oil cooler, or extended high-load paving in hot weather. | Reduce load and let the machine idle to cool down, then check fluid level and clear debris from the cooler. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
BG-230D attachments & work tools
Screed options
Factory choice of two bolt-on screeds: the Extend-A-Mat 8-16B or the AS2251. Both mount to the tractor through the paver's screed tow-point/pull arms rather than a quick-coupler, and both are offered with diesel-fired or electric heat.
Paving width / bolt-on extensions
Base mat width for this 8-16 class screed runs roughly 2.44-4.88 m (8-16 ft). Heavy-duty screed frames accept bolt-on extension sections to widen the mat for highway and large-lot passes; exact max width depends on the screed model and extension package fitted, so treat width beyond the base frame as varies by configuration.
Screed heat system
Diesel burner heat is the base setup. Electric heat is optional and uses zone-monitored heating elements that keep heating a zone even if that zone's sensor fails; electric heat draws off the paver's optional generator rather than shop power.
Generator / auxiliary power kit
Optional single-phase, tractor-mounted generator running at 1,800 rpm powers the electric screed and an auxiliary power panel rated about 10.8 hp (8 kW), feeding four 120V and two 240V jobsite receptacles. Needed if the electric-heat screed is specified.
Auger system
Hydraulically adjustable augers are standard equipment, not a bolt-on kit. Auger height raises for clearance when loading or unloading the paver on a trailer, and adjusts in operation to tune the material head in front of the screed.
Material feed drive layout
Feeder drive motors sit outboard of the mainframe instead of inside the feed tunnel, keeping them off the heat and narrowing the center chain cover for better material flow to the augers. This is a chassis design feature, not a selectable option.
Grade and slope control
Cat's paver line of this class supports automated grade & slope control acting on the screed tow-point cylinders, using a sonic averaging beam or rigid ski sensor commonly offered in 9.15 m (30 ft) and 12.2 m (40 ft) lengths. Sensor-kit fitment for a specific BG-230D serial range should be confirmed with a dealer rather than assumed.
Operator station protection
An operator umbrella/sun canopy with a universal mounting bracket is offered across Cat asphalt paver and cold planer models of this era for shade and weather cover at the sliding, side-shift operator station.
Propulsion / running gear
BG-230D is a rubber-tired paver with a hydrostatic propel system across four speed ranges and independent-wheel anti-slip control during slippage. No tracked-undercarriage variant is documented for this model.
All BG-230D assemblies by section
Every catalogued assembly group for the Caterpillar BG-230D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
204-7034 Air Cleaner Gp -Engine
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
| 20***34 | Air Cleaner Group; -Engine | 1 |
| 20***34 | Filter Element As-Air; (Primary) | 1 |
239-3058 Air Cleaner Gp
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 09***96 | Elbow | 1 |
| 14***67 | Clamp; (Hose) | 1 |
270-4374 Elbow Gp-Air Inlet
| 11***22 | Bolt; (M8x16-mm) | 8 |
| 11***79 | Gasket | 3 |
| 18***27 | Plate | 3 |
239-3059 Exhaust Gp
| 14***67 | Clamp; (Hose) | 1 |
| 19***58 | Muffler As | 1 |
| 23***59 | Exhaust Group | 1 |
233-9539 Turbocharger Gp
| 10***16 | Bolt; (M6x16-mm) | 2 |
| 14***53 | Stud | 7 |
| 17***38 | Bolt | 8 |
Basic Engine
232-7528 Camshaft Gp
| 1B***36 | Key-Woodruff | 1 |
| 22***67 | Camshaft | 1 |
| 23***28 | Camshaft Group | 1 |
230-9196 Cover Gp-Front Housing
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 21***03 | Washer; (Sealing) | 1 |
269-3101 Cover Gp-Valve Mechanism
| 11***04 | Seal-O-Ring | 1 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 13***88 | Cap-Oil Filler; (Engine) | 1 |
234-0251 Cover Gp-Valve Mechanism
| 11***04 | Seal-O-Ring | 1 |
| 13***88 | Cap-Oil Filler; (Engine) | 1 |
| 15***32 | Seal-O-Ring | 1 |
232-7400 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 0 |
308-4729 Crankshaft Gp
| 21***14 | Gear-Crankshaft; (34-Teeth) | 1 |
| 23***00 | Crankshaft Group | 1 |
| 30***29 | Gear; (Sub For Th3084729), Crankshaft Group, Gear; Planetary, Gear | 1 |
232-7439 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 0 |
232-7606 Cylinder Block Gp
| 20***19 | Bolt; (M8x1.25x16-mm) | 10 |
| 23***49 | Housing As | 1 |
| 23***04 | Cylinder Block Group | 1 |
308-4728 Cylinder Block Gp
| 20***19 | Bolt; (M8x1.25x16-mm) | 10 |
| 23***49 | Housing As | 1 |
| 23***04 | Cylinder Block Group | 1 |
232-7604 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 06***02 | Dowel | 10 |
| 06***06 | Plug | 1 |
232-7524 Cylinder Head Gp
| 22***01 | Bolt; (M15x1.5x137-mm) | 7 |
| 22***02 | Bolt; (M15x1.5x162-mm) | 3 |
| 23***19 | Cylinder Head Group | 1 |
308-4731 Cylinder Head Gp
| 22***01 | Bolt; (M15x1.5x137-mm) | 7 |
| 22***02 | Bolt; (M15x1.5x162-mm) | 3 |
| 23***19 | Cylinder Head Group | 1 |
232-7519 Cylinder Head Gp
| 06***06 | Plug | 4 |
| 14***79 | Retainer-Valve Spring | 16 |
| 18***82 | Guide-Valve | 8 |
230-9699 Drive Gp-Fan
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 13***79 | Pulley-Fan Drive | 1 |
| 23***65 | Spring Extension, Housing As | 1 |
234-9680 Drive Gp-Fan
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 12***97 | V-Belt Set; (Includes 2-Belts)(1283-mm) (Fan Drive) | 1 |
| 13***79 | Pulley-Fan Drive | 1 |
239-3061 Drive Gp-Pump
| 10***53 | Hose As | 1 |
| 1T***17 | Bolt-12 Point Head; (3/8-24x1-In) | 8 |
| 23***61 | Drive Group-Pump | 1 |
239-3062 Drive Gp-Pump
| 00***42 | Breather; (Generator Oil) | 1 |
| 00***34 | Bearing As-Tapered Roller | 8 |
| 01***24 | Bushing To Supply Port | 1 |
245-9831 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 10 |
| 16***89 | Flywheel As | 1 |
223-7825 Housing Gp-Flywheel
| 10***57 | Plate | 1 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 14***76 | Housing-Flywheel | 1 |
232-6179 Housing Gp-Front
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
308-4764 Housing Gp-Front
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
232-3713 Lifting Gp-Engine
| 10***30 | Bolt; (M10x1.5x20-mm) | 4 |
| 22***48 | Plate-Lifting | 1 |
| 23***13 | Lifting Group-Engine | 1 |
144-7882 Mounting Gp-Engine
| 03***34 | Screw | 8 |
| 10***77 | Support As-Engine; (Rh) | 1 |
| 10***78 | Support As-Engine; (Lh) | 1 |
252-6456 Mounting Gp-Engine
| 19***32 | Support-Front; (Lh) | 1 |
| 19***34 | Support-Front; (Rh) | 1 |
| 19***36 | Stud | 8 |
232-2565 Pan Gp-Oil -Engine
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
| 22***04 | Pan As-Oil | 1 |
308-4730 Piston & Rod Gp
| 12***36 | Ring-Retaining | 2 |
| 22***36 | Kit-Piston Ring | 1 |
| 22***37 | Piston As | 4 |
232-7442 Piston & Rod Gp
| 12***36 | Ring-Retaining | 2 |
| 22***36 | Kit-Piston Ring | 1 |
| 22***37 | Piston As | 4 |
232-6204 Plug Gp-Engine
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 23***04 | Plug Group-Engine | 1 |
253-2479 Plug Gp-Engine -Cylinder Block
| 03***63 | Plug | 1 |
| 19***67 | Seal-O-Ring | 1 |
| 23***61 | Plug; (Blanking) | 1 |
225-4317 Plug Gp-Engine
| 22***17 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
230-7353 Pulley Gp-Crankshaft
| 23***53 | Pulley Group-Crankshaft | 1 |
| 6I***01 | Block | 1 |
| 6I***02 | Pulley | 1 |
225-5963 Rocker Arm Gp
| 18***46 | Screw | 2 |
| 22***25 | Lever As | 4 |
| 22***29 | Plug | 2 |
232-7526 Valve Mechanism Gp
| 06***95 | Rod | 8 |
| 13***53 | Tappet | 8 |
| 18***46 | Screw | 2 |
308-4732 Valve Mechanism Gp
| 06***95 | Rod | 8 |
| 13***53 | Tappet | 8 |
| 1B***36 | Key-Woodruff | 1 |
Controls
102-2703 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 1 |
| 10***47 | Gear-Worm | 1 |
| 10***50 | Guide-Bushing | 1 |
206-6698 Adjuster Gp-Height
| 10***24 | Tube As; (Vertical) | 4 |
| 10***39 | Key-Square | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
8i-0257 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 2 |
| 10***04 | Bolt-Shoulder | 2 |
| 10***24 | Tube As; (Vertical) | 4 |
197-9844 Chain Gp-Screed
| 10***87 | Link-Connecting | 1 |
| 19***33 | Link-Offset | 1 |
| 19***44 | Chain Group-Screed | 1 |
197-5288 Crown Gp
| 10***39 | Key-Square | 1 |
| 11***50 | Sprocket; (12-Teeth) | 1 |
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 1 |
120-5898 Crown Gp-Manual
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 05***09 | Bolt-Socket Head | 4 |
| 10***87 | Link-Connecting | 1 |
276-4590 Crown Gp-Manual
| 10***01 | .. Roller, Bearing | 2 |
| 10***38 | Pointer | 1 |
| 10***39 | Key-Square | 1 |
196-2503 Jack Gp-Height Adjuster
| 10***64 | Bearing-Thrust | 2 |
| 11***49 | Worm | 1 |
| 19***03 | Jack Group-Height Adjuster | 1 |
185-4056 Jack Gp-Height Adjuster
| 18***65 | Jack Group-Height Adjuster | 1 |
| 18***56 | Jack Group-Height Adjuster | 1 |
| 1F***50 | Nut Rops Support | 1 |
102-2699 Jack Gp-Sloper
| 10***99 | Jack Group-Sloper | 1 |
| 10***46 | Gear-Worm | 1 |
| 10***49 | Guide-Bushing | 1 |
277-2004 Motor Gp-Power Adjuster
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
282-7961 Shaft Gp-Drive -Non-Actuated
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 28***61 | Shaft Group-Drive; -Non-Actuated | 1 |
197-9849 Shaft Gp-Drive -Rear
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***45 | Spindle As | 1 |
197-9850 Shaft Gp-Drive -Front
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***12 | Spindle As | 1 |
8i-0213 Sloper Gp-Manual
| 06***93 | Lockwasher-Bearing | 2 |
| 10***99 | Jack Group-Sloper | 2 |
| 10***00 | . Axle, Rod End | 2 |
Cooling System
231-0038 Connection Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 1 |
| 22***07 | Connection As | 1 |
| 22***08 | Regulator-Water Temperature | 1 |
296-5616 Cooler Gp-Engine Oil
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 22***17 | Cooler-Oil; (Engine) | 1 |
| 22***18 | Seal | 2 |
232-3722 Cooler Gp-Engine Oil
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 22***17 | Cooler-Oil; (Engine) | 1 |
| 22***18 | Seal | 2 |
238-2799 Cooler Gp-Fltr Base & Eng Oil
| 22***41 | Plug | 1 |
| 22***44 | Gasket; (Engine Oil Filter Base) | 2 |
| 23***22 | Cooler Group-Engine Oil | 1 |
230-7355 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 2 |
| 22***38 | Seal-O-Ring | 1 |
239-3071 Radiator & Hyd Oil Cooler Gp
| 21***74 | Cap-Pressure; (16-Psi)(Radiator) | 1 |
| 21***14 | Spacer; (8.2x18x7-mm Thk) | 2 |
| 22***13 | Aftercooler As-Air | 1 |
239-3060 Radiator & Hyd Oil Cooler Gp
| 06***86 | Connector | 2 |
| 10***43 | Mount-Flexible | 2 |
| 17***31 | Guard As-Fan | 2 |
239-3082 Recovery Gp-Coolant
| 03***48 | Clip; (11.11mm .437in Id) | 4 |
| 14***11 | Cap-Vented; (Coolant Recovery) | 1 |
| 14***94 | Recovery Group-Coolant | 1 |
Electrical And Starting System
233-9533 Alternator Gp-Charging
| 06***66 | Washer | 1 |
| 10***51 | Bolt; (M8x1.25x130-mm) | 1 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 1 |
243-0642 Battery & Wiring Gp
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 03***73 | Bolt; (3/8-16x1.5-In) | 2 |
| 03***25 | Terminal-Ring; (For 3/8" Fastener) | 1 |
244-3348 Box Gp-Junction
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 4 |
| 10***23 | Board-Control | 2 |
122-9303 Buffer Gp-Sensor -Material Height
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
122-9309 Buffer Gp-Sensor -5000-Hz Pwm
| 12***09 | Buffer Group-Sensor; -5000-Hz Pwm-Conveyor Speed | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
240-5535 Converter Gp-Electrical
| 24***35 | Converter Group-Electrical | 1 |
| 30***83 | Resistor As; (24-Volt) | 1 |
232-0728 Cover Gp-Wiring Harness
| 23***28 | Cover Group-Wiring Harness | 1 |
| 24***28 | Link; (Plastic) | 18 |
| 24***29 | Kit-Bracket; (Wiring Harness Cover) | 1 |
164-7360 Cover Gp-Wiring Harness
| 16***60 | Cover Group-Wiring Harness | 1 |
| 17***96 | Bracket-Mounting | 1 |
| 17***97 | Flange | 1 |
239-3049 Electrical Ar
| 15***27 | Horn Group-Electric | 1 |
| 23***49 | Electrical Ar | 1 |
| 24***42 | Battery & Wiring Group | 1 |
234-5077 Generator & Mtg Gp-Hydraulic
| 11***33 | Washer; (11x50x6-mm Thk) | 4 |
| 1M***43 | Grommet | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
240-6775 Generator Ar
| 23***77 | Generator & Mtg Group-Hydraulic | 1 |
| 23***36 | Cover Group-Generator | 1 |
| 24***75 | Generator Ar | 1 |
231-1332 Generator Gp
| 23***32 | Generator Group | 1 |
233-9834 Glow Plug Gp
| 22***70 | Glow Plug; (24-Volt)(12-Volt) | 4 |
| 23***26 | Clip | 1 |
| 23***34 | Glow Plug Group | 1 |
243-0645 Installation Gp-Controls
| 11***03 | Harness As-Switch; (Parking Brake) | 1 |
| 11***90 | Plate | 1 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 12 |
162-3294 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
148-7260 Lamp Gp-Warning Beacon
| 03***14 | Screw; (10-32x1-In) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
246-2110 Lighting Gp-Flood
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***99 | Harness As-Lighting; (Floodlights)(Rear) | 2 |
| 11***17 | Plate | 2 |
160-7395 Module Gp-Timer
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 16***95 | Module Group-Timer; -Governor Control | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
170-7071 Motor Gp-Electric -Fuel Transfer Pump
| 09***47 | Brush As | 1 |
| 11***94 | Bell; (Rear) | 1 |
| 11***61 | Bearing | 2 |
244-3314 Panel Gp-Control
| 01***80 | Lockwasher | 2 |
| 06***08 | Locknut; (1-11-1/4-Thd) | 1 |
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
306-7612 Panel Gp-Power
| 19***06 | Strip-Terminal | 1 |
| 19***80 | Circuit Breaker As; (20-Ampere)(240-Volt Receptacle) | 1 |
| 19***75 | Receptacle | 2 |
232-6362 Panel Gp-Power -Generator
| 19***06 | Strip-Terminal | 1 |
| 19***80 | Circuit Breaker As; (20-Ampere)(240-Volt Receptacle) | 2 |
| 19***75 | Receptacle | 2 |
225-5977 Resistor As
| 12***82 | Connector-Receptacle | 1 |
| 22***77 | Resistor As | 1 |
| 5P***23 | Wire 4.55m (Br/Bk2); (1-Conn. Ether Starting System Sending Unit / 1-Conn. Solenoid Valve Ether Start System) | 0 |
106-9703 Sensor Gp-Auger
| 10***28 | Clamp | 2 |
| 10***03 | Sensor Group-Auger | 1 |
| 10***66 | Sensor As-Sonic; (Mat'L Flow) | 2 |
104-6600 Sensor Gp-Auger
| 10***00 | Sensor Group-Auger | 1 |
| 10***91 | Support As | 2 |
| 10***92 | Sensor Group-Position; -Auger | 2 |
168-3551 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***51 | Sensor Group-Position; -Steering | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
214-4863 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
| 21***63 | Sensor Group-Position; -Rotary-Tc Impeller Clutch, Lh Pedal | 1 |
284-8876 Sensor Gp-Position
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 28***76 | Sensor Group-Position | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
109-0174 Sensor Gp-Position -Grade
| 10***74 | Sensor Group-Position; -Grade | 1 |
| 15***83 | Arm As-Grade Sensor | 1 |
| 15***87 | Shoe As | 1 |
109-0192 Sensor Gp-Position -Auger
| 10***92 | Sensor Group-Position; -Auger | 1 |
| 15***54 | Cable | 1 |
| 3H***94 | Setscrew-Socket | 2 |
160-7396 Solenoid Gp-Throttle -Governor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***96 | Solenoid Group-Throttle; -Governor | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
230-7304 Starting Motor Gp-Electric
| 22***50 | Starting Motor Group-Electric | 1 |
| 23***04 | Starting Motor Group-Electric | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
172-8660 Switch Gp-Liquid Level -Hydraulic Tank
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
241-8368 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
254-3783 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
167-0138 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
248-4064 Wiring Gp-Engine
| 11***18 | Clip | 3 |
| 13***89 | Clip; (Ladder) | 4 |
| 17***15 | Strap; (Dual Clamp) | 2 |
243-0644 Wiring Gp-Hydraulic Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***85 | Connector; (4-Pole) | 2 |
| 10***51 | Plug | 1 |
232-6366 Wiring Gp-Hydraulic Generator
| 19***81 | Circuit Breaker As; (35-Ampere)(Generator) | 1 |
| 1M***43 | Grommet | 2 |
| 1S***94 | Clip-R.H. Side Engine Support | 2 |
243-1843 Wiring Gp-Screed -Electric Heat
| 17***65 | Plug As-Connector | 1 |
| 19***97 | Panel Group-Electronic; -Material Height | 2 |
| 23***35 | Handrail As; (Lh) | 1 |
251-1695 Wiring Gp-Screed
| 25***95 | Wiring Group-Screed | 1 |
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 4 |
| 30***42 | Flange, Harness As-Screed; (Electric Heat), Oil Cooler, . Flange, Flange; (Sub For At251127) | 1 |
244-4976 Wiring Gp-Screed -Electric Heat
| 17***65 | Plug As-Connector | 1 |
| 19***96 | Panel Group-Electronic; -Material Height, Rh | 1 |
| 19***97 | Panel Group-Electronic; -Material Height | 1 |
Electrical System
196-1297 Panel Gp-Electronic -Material Height
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 19***97 | Panel Group-Electronic; -Material Height | 1 |
196-1296 Panel Gp-Electronic -Material Height, Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***83 | Relay-Time Delay; (Electric Heat) | 1 |
Engine Arrangement
304-7046 Engine Ar
304-6910 Engine Ar
| 29***55 | Bulb,C5w, 24v, 5w; Washer - Starting Jaw, Bulb,C5w, 24v, 5w; 24v 5w, Bulb,C5w, 24v, 5w, Engine Ar-Primary, Bulb,C5w, 24v, 5w; C5w, 24v, 5w | 1 |
| 30***10 | Hose; Air, Engine Ar | 1 |
239-3052 Engine Ar
| 14***82 | Mounting Group-Engine | 1 |
| 23***52 | Engine Ar | 1 |
| 23***56 | Engine Ar | 1 |
239-3056 Engine Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***80 | Sensor As-Speed; (Engine) | 1 |
304-6909 Engine Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***80 | Sensor As-Speed; (Engine) | 1 |
297-4047 Engine Ar-Primary
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
| 23***04 | Starting Motor Group-Electric | 1 |
297-4055 Engine Ar-Primary
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
| 23***04 | Starting Motor Group-Electric | 1 |
177-9752 Engine Ar-Primary
| 17***52 | Engine Ar-Primary | 1 |
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
304-6915 Installation Ar-Engine
| 14***82 | Mounting Group-Engine | 1 |
| 23***58 | Air Cleaner Group | 1 |
| 23***59 | Exhaust Group | 1 |
Feeder Drag And Auger Conveyors
102-6331 Actuator Gp-Power
| 10***31 | Actuator Group-Power; -Custom | 1 |
| 11***29 | Kit-Seal; (Power Actuator) | 1 |
| 11***81 | Kit-Gear; (Power Actuator) | 1 |
106-9688 Bearing Gp-Auger
| 10***11 | Fitting | 1 |
| 10***88 | Bearing Group-Auger | 1 |
| 10***18 | Bearing Group-Auger | 1 |
106-9718 Bearing Gp-Auger
| 01***41 | Setscrew-Socket | 3 |
| 10***18 | Bearing Group-Auger | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
116-9509 Bearing Gp-Auger
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***09 | Bearing Group-Auger | 1 |
201-5584 Bearing Gp-Auger
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
| 20***84 | Bearing Group-Auger | 1 |
280-9924 Chain Gp-Conveyor
| 28***24 | Chain Group-Conveyor | 1 |
| 28***79 | Bar-Side | 224 |
| 28***80 | Foam Insulation; 40 X 60 X 644 mm, Bar-Side | 112 |
108-0339 Chain Gp-Conveyor
| 10***39 | Chain Group-Conveyor | 1 |
| 8I***54 | Chain Group-Conveyor | 2 |
8i-0854 Chain Gp-Conveyor
| 8I***14 | Bar-Side | 56 |
| 8I***15 | Bar-Side | 28 |
| 8I***16 | Bar-Side | 112 |
103-4783 Conveyor Ar-Drag & Auger
| 10***83 | Conveyor Ar-Drag & Auger | 1 |
| 12***02 | Footshaft Group | 2 |
| 22***30 | Shaft Group-Feeder Drive | 2 |
228-9064 Conveyor Gp-Auger
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 2 |
| 06***66 | Bolt; (3/4-10x1.642-In) | 6 |
| 10***55 | Plate | 1 |
8i-0822 Conveyor Gp-Drag
| 05***20 | Pin-Spring | 56 |
| 12***46 | Bar-Feeder | 28 |
| 28***24 | Chain Group-Conveyor | 1 |
8i-0852 Drive Gp-Conveyor -Drag Conveyor
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 08***43 | Gear-Cluster | 3 |
8i-0866 Drive Gp-Conveyor -Auger
| 08***44 | Gear-Input | 1 |
| 08***83 | Washer; (Thrust) | 1 |
| 09***78 | Pin-Spring | 3 |
5e-9825 Extension Gp-Auger -2-Ft, Lh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 5E***25 | Extension Group-Auger; -2-Ft, Lh | 1 |
5e-9808 Extension Gp-Auger -1-Ft, Lh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 5E***08 | Extension Group-Auger; -1-Ft, Lh | 1 |
5e-9809 Extension Gp-Auger -1-Ft, Rh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 34***64 | Segment-Half Auger; (Rh) | 1 |
5e-9826 Extension Gp-Auger -2-Ft, Rh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 5E***26 | Extension Group-Auger; -2-Ft, Rh | 1 |
1g-9347 Extension Gp-Auger -6 In
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 1G***48 | Tube | 2 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 2 |
122-0702 Footshaft Gp
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
253-1411 Gate Gp-Feeder
| 10***31 | Actuator Group-Power; -Custom | 2 |
| 10***32 | Gate As | 2 |
| 11***33 | Pin | 2 |
8i-0861 Guard Gp-Feeder
| 03***82 | Screw; (3/8-16x2-In) | 16 |
| 13***59 | Bar | 4 |
| 15***80 | Guard As; (Left Front)(Right Rear) | 2 |
104-6594 Lines Gp-Lubrication
| 10***94 | Lines Group-Lubrication | 1 |
| 10***09 | Tube As | 1 |
| 10***10 | Tube As | 1 |
228-4130 Shaft Gp-Feeder Drive
| 03***21 | Bolt-Allen Hd; (3/8unc X 1) | 4 |
| 10***30 | Bearing-Flange | 1 |
| 10***70 | Key-Square | 1 |
Frame And Body
253-1002 Arm Gp-Drop
| 10***68 | Nipple-Pipe | 2 |
| 11***99 | Pin As-Pivot | 2 |
| 25***02 | Arm Group-Drop | 1 |
221-4345 Arm Gp-Drop
| 11***99 | Pin As-Pivot | 2 |
| 13***20 | Shaft | 2 |
| 13***77 | Lockout | 2 |
123-2262 Arm Gp-Tow
| 03***83 | Spacer | 16 |
| 03***53 | Ring-Retaining | 2 |
| 05***74 | Pin | 2 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
109-2722 Bracket Gp-Support
| 06***66 | Bolt; (3/4-10x1.642-In) | 2 |
| 10***22 | Bracket Group-Support | 1 |
| 11***52 | Plate | 1 |
206-6689 Carriage Gp-Extender
| 18***25 | Scraper; (Brass) | 4 |
| 19***57 | Scraper As | 4 |
| 1A***68 | Nut | 6 |
240-6778 Cover Gp-Access
| 03***72 | Bolt; (3/8-16-Thd) | 4 |
| 24***78 | Cover Group-Access | 1 |
| 24***15 | Panel As | 1 |
239-3073 Cover Gp-Access
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 17 |
| 03***73 | Bolt; (3/8-16x1.5-In) | 10 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
240-6781 Cover Gp-Access -Without Ventilation
| 14***60 | Plate | 1 |
| 24***81 | Cover Group-Access; -Without Ventilation | 1 |
| 24***11 | Panel As | 1 |
240-6779 Cover Gp-Access
| 10***56 | Rod; (Prop) | 1 |
| 24***79 | Cover Group-Access | 1 |
| 24***07 | Panel As | 1 |
240-6780 Cover Gp-Access -With Ventilation
| 24***80 | Cover Group-Access; -With Ventilation | 1 |
| 24***09 | Panel As | 1 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 6 |
234-9236 Cover Gp-Generator
| 10***68 | Grip-Handle | 2 |
| 10***24 | Bar | 1 |
| 15***39 | Nut-Weld; (M6x1-Thd)(M6x1-6h Thd) | 4 |
8i-0291 Deflector Gp
| 10***31 | Nut-Spring | 8 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 8 |
| 10***82 | Scale; (Rh)(Screed Ext) | 1 |
206-6699 Deflector Gp
| 16***24 | Rod-Threaded | 4 |
| 16***25 | Rod-Threaded | 4 |
| 16***26 | Turnbuckle | 4 |
215-7553 Extension Gp-Main Frame
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
106-9714 Extension Gp-Main Frame -1 Ft
106-9715 Extension Gp-Main Frame -2 Ft
186-3637 Extension Gp-Main Frame
206-6690 Frame Gp-Screed
| 10***68 | Grip-Handle | 2 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 6 |
| 10***82 | Scale; (Rh)(Screed Ext) | 1 |
287-6598 Frame Gp-Screed
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
120-5906 Frame Gp-Screed
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
216-6989 Gate Gp-End
| 10***68 | Grip-Handle | 2 |
| 10***35 | Support As | 2 |
| 10***09 | Chain; (14-In Each) | 0 |
145-9438 Gate Gp-End
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***68 | Grip-Handle | 2 |
| 10***70 | Support As | 2 |
168-0232 Guard Gp-Deflector
| 16***99 | Guard; (Lh) | 1 |
| 16***00 | Guard; (Rh) | 1 |
| 16***09 | Deflector | 1 |
104-6579 Guide Gp-Steering
| 03***74 | Keeper | 1 |
| 10***79 | Guide Group-Steering | 1 |
| 10***39 | Tube As | 1 |
172-3960 Hopper Gp
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 10***53 | Plate | 1 |
| 10***54 | Plate | 1 |
240-6790 Installation Ar-Platform Cover
| 23***83 | Ventilation Group-Paver | 1 |
| 24***80 | Cover Group-Access; -With Ventilation | 1 |
| 24***90 | Installation Ar-Platform Cover | 1 |
245-3291 Installation Ar-Platform Cover -Without Generator
| 23***17 | Mounting Group-Pump | 1 |
| 24***79 | Cover Group-Access | 1 |
| 24***91 | Installation Ar-Platform Cover; -Without Generator | 1 |
245-9077 Plate Gp-Screed -Electric Heat, 12-In
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 1 |
245-9080 Plate Gp-Screed -Electric Heat, 24-In
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 2 |
245-9078 Plate Gp-Screed -Electric Heat, 28-In
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 2 |
245-9079 Plate Gp-Screed -Electric Heat, 12-In
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 1 |
118-7295 Step Gp
| 11***15 | Step As | 1 |
| 11***34 | Bracket As; (Rh) | 1 |
| 11***03 | Bracket As; (Lh) | 1 |
239-3051 Structural Ar
| 10***79 | Guide Group-Steering | 1 |
| 11***65 | Beam Group-Transverse | 1 |
| 12***73 | Support Group-Tow Arm | 1 |
169-5471 Support Gp-Frame
| 10***89 | Brace Group | 1 |
| 10***22 | Bracket Group-Support | 1 |
| 16***71 | Support Group-Frame | 1 |
121-6173 Support Gp-Tow Arm
| 06***35 | Lock Pin | 2 |
| 10***42 | Bar | 1 |
| 12***73 | Support Group-Tow Arm | 1 |
239-3083 Ventilation Gp-Paver
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***57 | Plate | 1 |
Fuel System
164-4858 Cap Gp-Fuel Filler -Extreme Service, Lockable
| 16***58 | Cap Group-Fuel Filler; -Extreme Service, Lockable | 1 |
| 19***75 | Cover As-Filter; (Fuel Cap) | 1 |
| 9X***00 | Seal-O-Ring | 1 |
247-4132 Governor Gp
| 11***18 | Clip | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 16***96 | Solenoid Group-Throttle; -Governor | 1 |
8l-3471 Joint As-Tube
| 8L***71 | Joint As-Tube | 1 |
| 9X***36 | Seal | 2 |
239-3057 Lines Gp-Fuel
| 10***03 | Plate-Cover | 1 |
| 10***53 | Hose As | 1 |
| 10***04 | Pipe | 1 |
256-3021 Lines Gp-Fuel
| 10***09 | Cap As-Filler; (Fast Fill Fuel) | 1 |
| 10***03 | Plate-Cover | 1 |
| 10***04 | Pipe | 1 |
192-4302 Pump Gp-Fuel
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
| 13***76 | Strainer; (Fuel Pump) | 1 |
308-4733 Pump Gp-Fuel Injection
| 03***17 | Union | 1 |
| 06***64 | Fitting-Flared | 1 |
| 06***65 | Fitting-Brass | 1 |
284-4999 Pump Gp-Fuel Injection
| 14***45 | Valve Group-Solenoid; (24-Volt)(Fuel Shutoff) | 1 |
| 15***68 | Seal-O-Ring | 1 |
| 28***99 | Pump Group-Fuel Injection | 1 |
233-9526 Pump Gp-Fuel Injection
| 03***17 | Union | 1 |
| 06***64 | Fitting-Flared | 1 |
| 06***65 | Fitting-Brass | 1 |
248-2367 Pump Gp-Fuel Injection
| 14***45 | Valve Group-Solenoid; (24-Volt)(Fuel Shutoff) | 1 |
| 15***68 | Seal-O-Ring | 1 |
| 24***67 | Pump Group-Fuel Injection | 1 |
236-6910 Pump Gp-Fuel Injection
| 14***45 | Valve Group-Solenoid; (24-Volt)(Fuel Shutoff) | 1 |
| 15***68 | Seal-O-Ring | 1 |
| 23***10 | Pump Group-Fuel Injection | 1 |
270-6992 Pump Gp-Fuel Prm & Prim Filter
| 1R***04 | Filter Element-Wtr Sep & Fuel | 1 |
| 20***57 | Seal; (Fuel Filter) | 1 |
| 22***14 | Bowl As | 1 |
299-9265 Pump Gp-Fuel Prm & Prim Filter
| 1R***04 | Filter Element-Wtr Sep & Fuel | 1 |
| 20***57 | Seal; (Fuel Filter) | 1 |
| 22***14 | Bowl As | 1 |
233-9417 Pump Gp-Fuel Prm & Prim Filter
| 12***72 | Bolt | 3 |
| 21***08 | Fitting; (Quick Disconnect, Male) | 1 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
149-5380 Pump Gp-Fuel Transfer
| 08***68 | Spacer | 1 |
| 14***80 | Pump Group-Fuel Transfer | 1 |
| 17***71 | Motor Group-Electric; -Fuel Transfer Pump | 1 |
Grade References
200-0738 Gauge Gp-Indicator -Tow Point
| 17***32 | Film-Identification; (Tow Point Indicator) | 2 |
| 20***38 | Gauge Group-Indicator; -Tow Point | 1 |
| 20***40 | Plate | 2 |
109-5624 Leveler Gp -30 Ft Over Screed
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5625 Leveler Gp -30 Ft Over Screed
| 08***09 | Bracket | 7 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5626 Leveler Gp -Outboard
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5628 Leveler Gp -30 Ft Grade
| 10***04 | Tube; (1.1-M) | 1 |
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5623 Leveler Gp -30 Ft Outboard
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5622 Leveler Gp -40 Ft Outboard
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5627 Leveler Gp -40 Ft Grade
| 10***04 | Tube; (1.1-M) | 1 |
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
Hydraulic System
077-3951 Cap Gp-Hydraulic Oil Filler
| 07***51 | Cap As-Filler Breather | 1 |
| 07***32 | Filter Element-Breather; (Hydraulic Oil Filter) | 1 |
| 07***26 | Gasket | 2 |
8c-8002 Cylinder Gp-Hydraulic -Steering
| 03***31 | Ring-Back-Up | 2 |
| 1H***28 | Seal 6.3 cm(2.484 In.) I.D.; Seal--To Seal Pumps To Case | 1 |
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 1 |
206-6682 Cylinder Gp-Hydraulic -Extender
| 20***62 | Kit-Seal; (Extender Cylinder) | 0 |
| 20***82 | Cylinder Group-Hydraulic; -Extender | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
135-0218 Cylinder Gp-Hydraulic -Extender
| 03***39 | Ring-Back-Up | 1 |
| 12***75 | Ring-Wear | 2 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 1 |
135-0220 Cylinder Gp-Hydraulic -Hopper
| 13***20 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 13***21 | Kit-Seal; (Hopper Cylinder) | 1 |
| 5E***32 | Ring | 1 |
135-9444 Cylinder Gp-Hydraulic -Tow Point
| 13***44 | Cylinder Group-Hydraulic; -Tow Point | 1 |
| 17***34 | Kit-Seal; (Towpoint Cylinder) | 1 |
| 17***36 | Ring-Wear | 1 |
203-4273 Cylinder Gp-Hydraulic -Screed Hoist
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 20***73 | Cylinder Group-Hydraulic; -Screed Hoist | 1 |
| 23***05 | Kit-Seal; (Screed Hoist Cylinder) | 1 |
203-4275 Cylinder Gp-Hydraulic -Auger Hoist, Rh
| 20***75 | Cylinder Group-Hydraulic; -Auger Hoist, Rh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 24***14 | Kit-Seal; (Auger Hoist) | 1 |
203-4276 Cylinder Gp-Hydraulic -Auger Hoist, Lh
| 20***76 | Cylinder Group-Hydraulic; -Auger Hoist, Lh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 25***75 | Kit-Seal; (Auger Hoist) | 1 |
197-9766 Cylinder Gp-Hydraulic -Slope
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 14***61 | Plug | 2 |
| 14***62 | Seal-Washer | 2 |
278-0617 Cylinder Gp-Hydraulic
| 20***62 | Kit-Seal; (Extender Cylinder) | 1 |
| 27***17 | Cylinder Group-Hydraulic | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 17***15 | Filter Group-Oil; -Hydraulic Tank | 1 |
7x-5312 Filter Gp-Oil -Hydraulic
| 14***91 | Filter-Oil; (Advanced Efficiency) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 7X***12 | Filter Group-Oil; -Hydraulic | 1 |
239-3050 Hydraulic Ar
| 10***94 | Lines Group-Lubrication | 1 |
| 10***41 | Tank Group-Hydraulic | 1 |
| 10***58 | Lines Group-Auger | 1 |
108-2158 Lines Gp-Auger
| 10***06 | Pin | 2 |
| 10***79 | Pin | 2 |
| 10***82 | Hose As | 1 |
248-6369 Lines Gp-Conveyor
| 10***38 | Clamp-Half | 10 |
| 10***43 | Plate | 1 |
| 10***42 | Hose As | 1 |
206-6691 Lines Gp-Extender
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 14***18 | Connector As | 2 |
| 14***74 | Elbow As | 2 |
311-4880 Lines Gp-Extender
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***36 | Elbow As. | 2 |
| 16***32 | Pin | 2 |
112-3468 Lines Gp-Extension
| 11***68 | Lines Group-Extension | 1 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 2 |
| 14***65 | Elbow | 2 |
240-6777 Lines Gp-Generator Drive
| 12***19 | Hose As | 1 |
| 12***55 | Elbow As | 1 |
| 13***40 | Hose As | 1 |
239-3079 Lines Gp-Grade & Slope
| 10***02 | Valve Group-Solenoid | 2 |
| 10***02 | Tube As | 2 |
| 10***64 | Tube As | 1 |
239-3081 Lines Gp-Hopper
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 10***01 | Pin As | 2 |
| 10***44 | Elbow | 1 |
239-3080 Lines Gp-Hydraulic Oil Cooler
| 10***10 | Hose As | 1 |
| 14***38 | Elbow | 1 |
| 14***33 | Connector As | 2 |
251-4601 Lines Gp-Paver Ventilation
| 10***39 | Key-Square | 1 |
| 14***49 | Hose As | 1 |
| 14***51 | Valve-Flow Control; (Blower Motor) | 1 |
311-1959 Lines Gp-Slope
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***84 | Pin As | 4 |
| 14***13 | Adapter Group | 1 |
197-5285 Lines Gp-Slope
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***84 | Pin As | 4 |
248-6903 Lines Gp-Steering
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 07***43 | Steering Column Group | 1 |
| 10***49 | Plate | 1 |
133-8685 Lines Gp-Truck Hitch
| 03***82 | Screw; (3/8-16x2-In) | 2 |
| 08***73 | Clamp | 4 |
| 10***02 | Valve Group-Solenoid | 1 |
112-3466 Lines Gp-Vibratory
| 07***84 | Clamp | 6 |
| 08***86 | Clamp | 2 |
| 10***84 | Hose As | 2 |
232-0726 Lines Gp-Vibratory
| 10***05 | Plate | 7 |
| 14***09 | Adapter As | 2 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
250-2989 Motor & Mtg Gp-Generator
| 14***27 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***72 | Elbow Group | 1 |
197-1728 Motor Gp-Gear -Blower Fan
| 16***39 | Shim; (1.75-mm Thk) | 1 |
| 19***28 | Motor Group-Gear; -Blower Fan | 1 |
| 1F***22 | Bearing (.500" Long) | 4 |
8i-0721 Motor Gp-Gerotor -Vibratory
| 06***39 | Seal-O-Ring | 1 |
| 16***21 | Kit-Bearing; (Vibratory Motor) | 1 |
| 4D***86 | Seal--Bushing To Selector Valve Group | 1 |
6r-4097 Motor Gp-Piston -Propel
| 08***37 | Spring | 9 |
| 08***61 | Plate As. | 1 |
| 08***17 | Screw | 12 |
8i-0788 Motor Gp-Piston -Propel
| 03***20 | Ring | 4 |
| 07***53 | Pin; (Spring) | 4 |
| 10***83 | Bearing | 2 |
223-0581 Motor Gp-Piston -Drag Conveyor
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
227-5104 Motor Gp-Piston -Generator
| 10***78 | Bearing-Roller | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
223-0583 Motor Gp-Piston -Auger Conveyor
| 11***21 | Plug-Special | 2 |
| 11***22 | Spring | 2 |
| 12***13 | Gasket-End Cap | 1 |
234-4417 Mounting Gp-Pump
| 03***92 | Seal; (126.59mm Id) | 1 |
| 22***06 | Mount As | 1 |
| 22***10 | Shaft As | 1 |
266-3300 Mounting Gp-Pump
| 22***06 | Mount As | 1 |
| 22***10 | Shaft As | 1 |
| 26***00 | Mounting Group-Pump | 1 |
239-3087 Pump & Lines Gp-Screed
| 10***57 | Connector | 1 |
| 14***23 | Hose As | 1 |
| 14***27 | Connector Group | 1 |
240-6776 Pump & Mtg Gp-Generator
| 14***16 | Connector Group | 1 |
| 23***90 | Pump Group-Piston; -Generator | 1 |
| 24***76 | Pump & Mtg Group-Generator | 1 |
267-9478 Pump Gp-Gear
| 25***22 | Kit-Gear; (Steering Gear Pump) | 1 |
| 26***78 | Pump Group-Gear | 1 |
| 27***45 | Kit-Seal; (Steering Gear Pump) | 1 |
237-0683 Pump Gp-Gear -Screed
| 22***11 | Kit-Seal | 1 |
| 23***83 | Pump Group-Gear; -Screed | 1 |
| 25***22 | Kit-Gear; (Steering Gear Pump) | 1 |
8i-0988 Pump Gp-Metering
| 03***33 | Bolt | 7 |
| 05***50 | Seal | 3 |
| 07***23 | Seal | 1 |
239-1490 Pump Gp-Piston -Generator
| 00***54 | Cup-Roller Bearing | 1 |
| 10***79 | Cone-Bearing | 1 |
| 12***22 | Bolt; (M14x2x50-mm) | 4 |
8i-0838 Pump Gp-Piston -Propel
| 03***04 | Key | 1 |
| 03***05 | Seal-O-Ring | 2 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
8i-0839 Pump Gp-Piston -Propel
| 03***04 | Key | 1 |
| 03***05 | Seal-O-Ring | 2 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
143-2872 Pump Gp-Piston -Drag Conveyor, Auger Conveyor
| 07***75 | Shim | 1 |
| 08***98 | Cover-Gerotor | 1 |
| 08***02 | Plug-Orifice | 2 |
8i-0836 Pump Gp-Piston -Auxiliary
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 2 |
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 8 |
| 05***33 | Seal | 1 |
9t-2031 Rotating Gp-Pump
| 00***83 | Ring-Snap | 1 |
| 9T***31 | Rotating Group-Pump; -Steering, Pilot | 1 |
| 9T***57 | Pin | 3 |
107-9341 Tank Gp-Hydraulic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***41 | Tank Group-Hydraulic | 1 |
| 10***87 | Hose As | 1 |
110-6347 Tank Gp-Hydraulic
| 07***51 | Cap As-Filler Breather | 1 |
| 10***40 | Tank As-Hydraulic | 1 |
| 10***30 | Cover As | 1 |
250-2990 Valve & Mtg Gp-Control -Generator
| 11***18 | Clip | 1 |
| 14***27 | Connector Group | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 2 |
134-4721 Valve Gp-Bank -Auger Hoist, Screed Hoist
| 08***80 | Case As | 6 |
| 08***83 | Body | 3 |
| 08***85 | Spring | 6 |
190-8803 Valve Gp-Control -Vibratory Bypass
| 19***03 | Valve Group-Control; -Vibratory Bypass | 1 |
| 22***80 | Valve Group-Control; (Vibratory Bypass) | 1 |
| 22***83 | Coil | 1 |
208-1632 Valve Gp-Control -Vibratory
| 19***47 | Valve Group-Control; (Vibratory) | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
227-5105 Valve Gp-Control -Generator
| 22***05 | Valve Group-Control; -Generator | 1 |
| 25***76 | Valve Group-Control | 1 |
| 25***79 | Valve As-Needle | 1 |
254-0776 Valve Gp-Control
| 25***76 | Valve Group-Control | 1 |
| 25***77 | Kit-Seal; (Generator Control Valve) | 1 |
| 27***89 | Coil-Solenoid; (Solenoid Valve) | 1 |
103-4924 Valve Gp-Control -Propel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***24 | Valve Group-Control; -Propel | 1 |
| 10***18 | Coil | 5 |
208-1631 Valve Gp-Control -Vibratory
| 19***47 | Valve Group-Control; (Vibratory) | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
251-4844 Valve Gp-Control -Generator
| 25***44 | Valve Group-Control; -Generator | 1 |
| 25***77 | Kit-Seal; (Generator Control Valve) | 1 |
| 25***79 | Valve As-Needle | 1 |
169-0166 Valve Gp-Counterbalance -Screed
| 07***27 | Kit-Seal; (Counterbalance Valve) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 12***16 | Solenoid As | 2 |
118-8396 Valve Gp-Counterbalance
| 11***77 | Hose As | 2 |
| 11***96 | Valve Group-Counterbalance | 1 |
| 14***16 | Connector Group | 1 |
190-4168 Valve Gp-Flow Control
| 19***68 | Valve Group-Flow Control | 1 |
| 19***01 | Coil | 1 |
| 20***76 | Kit-Seal; (Flow Control Valve)(Front Wheel Assist) | 1 |
257-5145 Valve Gp-Pump Control -Auxiliary Pump
| 25***45 | Valve Group-Pump Control; -Auxiliary Pump | 1 |
| 4J***33 | Seal Fuel Injection Pump | 1 |
| 5L***58 | Seal 14 mm(.551 In.) I. D. | 1 |
103-1902 Valve Gp-Solenoid
| 08***83 | Body | 1 |
| 08***85 | Spring | 2 |
| 08***86 | Washer | 2 |
332-1453 Valve Gp-Solenoid
| 33***53 | Valve Group-Solenoid | 1 |
300-0504 Valve Gp-Solenoid -Extender, Slope
| 25***57 | Kit-Seal; (Check Valve) | 1 |
| 25***37 | Valve Group-Solenoid; (24-Volt) | 1 |
| 27***10 | Coil-Solenoid | 2 |
1g-6319 Valve Gp-Solenoid
| 03***28 | Seal-O-Ring | 2 |
| 08***90 | Seal-O-Ring | 2 |
| 1G***19 | Valve Group-Solenoid | 1 |
300-0505 Valve Gp-Solenoid
| 25***57 | Kit-Seal; (Check Valve) | 1 |
| 25***37 | Valve Group-Solenoid; (24-Volt) | 2 |
| 27***10 | Coil-Solenoid | 2 |
103-3602 Valve Gp-Solenoid -Extender, Slope
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 1 |
| 11***21 | Coil | 2 |
197-5294 Vibratory Gp
| 10***90 | Coupling | 4 |
| 10***95 | Bearing | 8 |
| 10***39 | Key-Square | 4 |
8i-0142 Vibratory Gp
| 09***99 | Fitting-Grease; (Hydraulic) | 3 |
| 10***90 | Coupling | 4 |
| 10***95 | Bearing | 8 |
Implements
106-3482 Extension Ar -Diesel Heat, 12-In
| 10***51 | Harness As-Screed; (Extension) | 1 |
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 5 |
106-3483 Extension Ar -Diesel Heat, 28-In
| 10***52 | Harness As-Screed; (Extension) | 1 |
| 10***83 | Extension Ar; -Diesel Heat, 28-In | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 8 |
247-1275 Extension Ar-Auger
| 10***14 | Extension Group-Main Frame; -1 Ft | 2 |
| 10***15 | Extension Group-Main Frame; -2 Ft | 2 |
| 11***09 | Bearing Group-Auger | 2 |
185-5433 Extension Ar-Auger
| 18***33 | Extension Ar-Auger | 1 |
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 21***53 | Extension Group-Main Frame | 4 |
247-1276 Extension Ar-Auger
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 10***15 | Extension Group-Main Frame; -2 Ft | 2 |
| 11***09 | Bearing Group-Auger | 2 |
150-7725 Extension Ar-Screed -20-Ft 2-In
| 10***83 | Extension Ar; -Diesel Heat, 28-In | 2 |
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 11***09 | Bearing Group-Auger | 2 |
206-6724 Extension Ar-Screed -20-Ft
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 10***15 | Extension Group-Main Frame; -2 Ft | 2 |
| 11***09 | Bearing Group-Auger | 2 |
206-6725 Extension Ar-Screed -16-Ft
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 11***09 | Bearing Group-Auger | 2 |
| 16***71 | Support Group-Frame | 2 |
122-0604 Extension Ar-Screed -17-Ft 6-In
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 2 |
| 12***04 | Extension Ar-Screed; -17-Ft 6-In | 1 |
| 1G***47 | Extension Group-Auger; -6 In | 1 |
206-6726 Extension Ar-Screed -18-Ft
| 10***14 | Extension Group-Main Frame; -1 Ft | 2 |
| 10***15 | Extension Group-Main Frame; -2 Ft | 2 |
| 11***09 | Bearing Group-Auger | 2 |
247-1281 Extension Gp-Screed -Maximum 20-Ft 2-In
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 11***09 | Bearing Group-Auger | 2 |
| 16***71 | Support Group-Frame | 2 |
247-1280 Extension Gp-Screed -Maximum 17-Ft 6-In
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 21***53 | Extension Group-Main Frame | 1 |
| 24***81 | Extension Group-Screed; -Electric Heat, 12-In | 2 |
245-9084 Extension Gp-Screed -Electric Heat With Vibration, 24-In
| 10***95 | Bearing | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
245-9081 Extension Gp-Screed -Electric Heat, 12-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
8i-0520 Extension Gp-Screed -Diesel Heat, 12-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
8i-0521 Extension Gp-Screed -Diesel Heat With Vibration, 28-In
| 10***95 | Bearing | 2 |
| 10***12 | Shaft As-Vibratory | 1 |
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
185-5408 Extension Gp-Screed -Diesel Heat, 24-In
| 10***95 | Bearing | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
247-1274 Extension Gp-Screed -Maximum 16-Ft
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 11***09 | Bearing Group-Auger | 2 |
245-9082 Extension Gp-Screed -Electric Heat With Vibration, 28-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***31 | Bar-Spacer | 1 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
185-5419 Extension Gp-Screed -Diesel Heat, 12-In
| 18***19 | Extension Group-Screed; -Diesel Heat, 12-In | 1 |
| 1A***68 | Nut | 4 |
| 20***59 | Plate | 1 |
245-9083 Extension Gp-Screed -Electric Heat, 12-In
| 1A***68 | Nut | 4 |
| 20***59 | Plate | 1 |
| 20***63 | Frame As | 1 |
171-3451 Hitch Gp-Truck
| 16***76 | Hitch Group-Truck; -Oscillating | 1 |
| 17***51 | Hitch Group-Truck | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
166-7676 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
106-9665 Installation Ar-Truck Hitch
| 10***65 | Installation Ar-Truck Hitch | 1 |
| 13***85 | Lines Group-Truck Hitch | 1 |
| 17***51 | Hitch Group-Truck | 1 |
112-0897 Roller Ar-Push
| 11***96 | Roller Group-Push | 1 |
| 11***97 | Roller Ar-Push | 1 |
| 5C***66 | Bolt (25 mm Long); (5/8-11x1-In) | 1 |
112-0896 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 10***64 | Shaft As | 2 |
| 11***95 | Roller As | 1 |
112-1276 Shaft Gp-Drive -Eccentric Weight
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 11***76 | Shaft Group-Drive; -Eccentric Weight | 1 |
| 24***28 | Seal | 1 |
Lubrication System
232-7378 Filter Gp-Engine Oil
| 23***78 | Filter Group-Engine Oil | 1 |
| 7W***26 | Filter As-Engine Oil | 1 |
230-7578 Pump Gp-Engine Oil
| 10***61 | Bolt; (M10x1.50x50-mm) | 5 |
| 22***29 | Pump As-Engine Oil | 1 |
| 23***78 | Pump Group-Engine Oil | 1 |
Machine Arrangement
239-3048 Common Ar -Ap-800d
| 10***80 | Undercarriage Ar | 1 |
| 10***81 | Console Ar | 1 |
| 10***83 | Conveyor Ar-Drag & Auger | 1 |
304-6912 Common Ar
| 10***80 | Undercarriage Ar | 1 |
| 10***81 | Console Ar | 1 |
| 10***83 | Conveyor Ar-Drag & Auger | 1 |
254-6090 Common Ar -Bg-230d
| 10***80 | Undercarriage Ar | 1 |
| 10***81 | Console Ar | 1 |
| 10***83 | Conveyor Ar-Drag & Auger | 1 |
304-6914 Common Ar
| 10***80 | Undercarriage Ar | 1 |
| 10***81 | Console Ar | 1 |
| 10***83 | Conveyor Ar-Drag & Auger | 1 |
195-9753 Kit-Maintenance
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
| 10***87 | Switch As-Toggle; (Screed Raise/Hld/Float) | 1 |
241-6806 Screed Ar
| 19***85 | Lines Group-Slope | 1 |
| 19***88 | Crown Group | 1 |
| 19***94 | Vibratory Group | 1 |
241-6776 Screed Ar
| 11***66 | Lines Group-Vibratory | 1 |
| 11***68 | Lines Group-Extension | 1 |
| 12***98 | Crown Group-Manual | 1 |
Operator Station
103-4781 Console Ar
| 10***81 | Console Ar | 1 |
| 14***95 | Console Group-Operator | 1 |
144-3995 Console Gp-Operator
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 01***70 | Setscrew | 2 |
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 4 |
114-0322 Gauge Gp-Cluster
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***22 | Gauge Group-Cluster | 1 |
| 11***81 | Kit-Gauge Housing | 1 |
155-3527 Horn Gp-Electric
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***27 | Horn Group-Electric | 1 |
| 16***01 | Horn As; (24-Volt, Low Tone) | 1 |
132-9382 Lever Gp-Propel
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
244-3347 Panel Gp-Instrument
| 07***00 | Switch As-Toggle; (Starter Engine Battery Charger) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
140-8379 Platform Gp
| 10***47 | Pin | 2 |
| 10***89 | Plate As | 1 |
| 10***56 | Rod; (Prop) | 1 |
247-2709 Platform Gp-Operator
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 2 |
| 19***01 | Bracket | 2 |
| 19***03 | Platform As; (Extender) | 2 |
245-2885 Platform Gp-Operator
| 11***14 | Platform As-Top | 1 |
| 14***74 | Extension As-Platform | 2 |
| 19***37 | Platform As; (Entender) | 1 |
103-4786 Seat Gp
| 10***86 | Seat Group | 1 |
| 10***32 | Seat Group | 1 |
103-7332 Seat Gp
| 10***17 | Post As-Seat | 1 |
| 10***32 | Seat Group | 1 |
| 13***87 | Locknut | 2 |
270-2417 Seat Gp -Vinyl
| 27***17 | Seat Group; -Vinyl | 1 |
| 27***19 | Arm; (Lh) | 1 |
| 27***80 | Arm; (Rh) | 1 |
119-1784 Seat Gp
| 11***84 | Seat Group | 1 |
| 19***76 | Kit-Armrest; (Lh) | 1 |
| 19***77 | Kit-Armrest; (Rh) | 1 |
187-6649 Umbrella Gp -Ap-650b
| 18***49 | Umbrella Group; -Ap-650b | 1 |
106-8541 Umbrella Gp
| 10***41 | Umbrella Group; -Bg-225c | 1 |
Power Train
257-4430 Assist Gp-Front Wheel
| 00***31 | Cup-Bearing | 4 |
| 00***43 | Nut | 2 |
| 06***15 | Nut; (1-1/4-12-Thd) | 3 |
106-9692 Assist Gp-Front Wheel
| 00***31 | Cup-Bearing | 4 |
| 00***43 | Nut | 2 |
| 06***15 | Nut; (1-1/4-12-Thd) | 3 |
162-7569 Brake & Planetary Gp
| 12***80 | Kit-Lining; (Brake, Planetary, Output)(Outbrd.) | 1 |
| 12***81 | Kit-Lining; (Brake, Planetary, Input)(Inbrd.) | 1 |
| 12***85 | Kit-Spring; (Brake, Planetary, Input)(Inbrd.) | 1 |
8i-0765 Final Drive Gp
| 0T***56 | Bolt (2 1/2" Long) | 20 |
| 11***07 | Nut; (3/4-16-Thd) | 10 |
| 12***95 | Mount | 1 |
239-3097 Lines Gp-Propel
| 07***84 | Clamp | 2 |
| 10***21 | Hose As | 1 |
| 10***24 | Valve Group-Control; -Propel | 1 |
128-4090 Manifold Gp-Front Wheel Drive
| 11***59 | Valve-Flow | 1 |
| 11***61 | Valve-Relief; (Front Wheel Assist) | 1 |
| 12***84 | Valve-Check | 2 |
145-0093 Planetary Gp-Final Drive
| 11***95 | Cone-Bearing | 1 |
| 11***96 | Cup-Bearing | 1 |
| 11***97 | Cone-Bearing | 1 |
1g-8609 Support Gp-Motor
| 1G***09 | Support Group-Motor | 1 |
| 1G***10 | Support | 1 |
| 1G***11 | Ring-Snap | 1 |
203-9717 Valve Gp-Differential Lock
| 20***17 | Valve Group-Differential Lock, Name-Plate (Lubrication : Offset Boom), Decals; (Lubrication, Offset Boom) | 1 |
| 22***82 | Nut; (1/2-20-Thd) | 1 |
| 22***84 | Kit-Shuttle Valve; (Differential Lock) | 1 |
117-9375 Wheel Ar
| 11***74 | Wheel Group | 2 |
| 11***75 | Wheel Ar | 1 |
117-7485 Wheel Ar
| 11***85 | Wheel Ar | 1 |
| 8I***64 | Wheel Group | 2 |
180-8058 Wheel Gp
| 11***73 | Wheel As | 1 |
| 18***58 | Wheel Group | 1 |
| 2D***43 | Seal-O-Ring | 1 |
8i-0764 Wheel Gp
| 18***57 | Wheel Group | 2 |
| 1K***74 | Valve Group; (Tire Inflation) | 2 |
| 2D***07 | Stud | 1 |
117-9374 Wheel Gp
| 10***34 | Extension-Valve | 1 |
| 10***35 | Valve-Rim | 1 |
| 11***74 | Wheel Group | 1 |
180-8057 Wheel Gp
| 18***57 | Wheel Group | 1 |
| 2D***65 | Seal-O-Ring | 1 |
| 2D***54 | Ring-Lock | 1 |
109-0957 Wheel Gp
| 08***52 | Tire; (22x6x17.75) | 1 |
| 10***56 | Wheel As | 1 |
| 10***57 | Wheel Group | 1 |
Service Equipment And Supplies
239-3053 Finish Ar -Ap-800d
| 23***53 | Finish Ar | 1 |
| 24***87 | Plate & Film Group; -Ap-800d | 1 |
7r-4741 Lines Gp-Spray Down
| 08***77 | Adapter | 1 |
| 1G***70 | Extension-Curve | 1 |
| 1G***79 | Hose As | 1 |
254-6088 Plate & Film Gp -Bg-230d
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 6 |
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 11***73 | Film-Stripe; (450-cm Each) | 0 |
226-3635 Plate & Film Gp -English
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
| 08***52 | Decal-Caution, Hopper Support | 2 |
| 11***84 | Film-Notice; (Machine Shipping) | 2 |
226-3636 Plate & Film Gp -French
| 15***07 | Film-Notice; (Machine Shipping) | 2 |
| 15***15 | Film-Warning; (Hopper Support) | 2 |
| 15***34 | Film-Warning; (Mounting) | 2 |
254-6089 Plate & Film Gp -Bg-230d
| 25***88 | Plate & Film Group; -Bg-230d | 1 |
| 25***89 | Plate & Film Group; -Bg-230d | 1 |
245-3287 Plate & Film Gp -Ap-800d
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 6 |
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 12***52 | Scale-Indicator | 1 |
254-0055 Plate & Film Gp
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 2 |
| 15***79 | Film-Instruction; (Grease)(Instructions) | 2 |
| 16***89 | Tack-Fastener | 4 |
254-0057 Plate & Film Gp
| 08***54 | Film-Notice; (Screed Retract) | 2 |
| 10***08 | Film; (Screed Adjustment)(Extender Screed) | 1 |
| 10***14 | Handle | 1 |
226-3638 Plate & Film Gp -French
| 15***07 | Film-Notice; (Machine Shipping) | 2 |
| 15***15 | Film-Warning; (Hopper Support) | 2 |
| 15***34 | Film-Warning; (Mounting) | 2 |
226-3637 Plate & Film Gp -English
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
| 08***52 | Decal-Caution, Hopper Support | 2 |
| 11***84 | Film-Notice; (Machine Shipping) | 2 |
Slope And Grade Control
119-1765 Beam Gp-Transverse
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 10 |
| 08***15 | Cushion-Rubber | 2 |
| 11***65 | Beam Group-Transverse | 1 |
185-4102 Control Ar-Grade
| 10***76 | Mounting Group-Control; -Grade Sensor | 2 |
| 18***60 | Sensor Group-Grade | 1 |
| 18***02 | Control Ar-Grade | 1 |
239-2367 Control Gp-Grade & Slope
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
106-9672 Control Gp-Grade & Slope
| 10***72 | Control Group-Grade & Slope | 1 |
| 10***75 | Control-Slope | 1 |
| 11***80 | Cable As | 1 |
209-3130 Control Gp-Grade & Slope
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
| 14***76 | Plug-Connector | 1 |
209-3127 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 10***36 | Cable As | 2 |
| 11***95 | Plug | 1 |
106-9676 Mounting Gp-Control -Grade Sensor
| 10***76 | Mounting Group-Control; -Grade Sensor | 1 |
| 13***89 | Support As; (Sensor) | 1 |
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 10 |
209-3131 Sensor Gp-Grade -Sonic
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
185-4060 Sensor Gp-Grade
| 10***91 | Strap | 1 |
| 10***74 | Sensor Group-Position; -Grade | 1 |
| 11***80 | Cable As | 1 |
209-3132 Sensor Gp-Grade -Averaging Ski
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
Undercarriage
113-5387 Bogie Gp
| 00***31 | Cup-Bearing | 8 |
| 00***43 | Nut | 4 |
| 06***15 | Nut; (1-1/4-12-Thd) | 3 |
239-2366 Mounting Gp-Averaging Ski
| 23***66 | Mounting Group-Averaging Ski | 1 |
| 28***75 | Collar | 4 |
| 28***77 | Tube | 2 |
103-4780 Undercarriage Ar
| 10***80 | Undercarriage Ar | 1 |
| 8I***65 | Final Drive Group | 2 |
BG-230D serial number reference
The PIN plate sits on the back of the paver, below the operator station steps. The serial number is the last 8 characters of the PIN; the first 3 characters (letters/digits) are the prefix identifying the model and build run, followed by a 5-digit sequence number. This generation shows two paired prefixes (B4G and A5P) for the same machine, reflecting Cat's dual AP-800D/BG-230D badging after its 1991 acquisition of Barber-Greene's paver line.
| Prefix | Identifies | Notes |
|---|---|---|
| B4G | BG-230D asphalt paver, same chassis cross-badged as AP-800D, Cat 3054C turbocharged diesel, ~130 hp (97 kW) at 2200 rpm, B4G00001 and up | Paired serial range with A5P; parts and service documentation list the two together for this generation. |
| A5P | BG-230D asphalt paver, same chassis cross-badged as AP-800D, Cat 3054C turbocharged diesel, ~130 hp (97 kW) at 2200 rpm, A5P00001 and up | Paired serial range with B4G; catalogued under the same combined AP-800D/BG-230D machine title. Confirm exact prefix against the PIN plate for your unit. |
Frequently asked questions
What engine does the Caterpillar BG-230D asphalt paver use?
A Cat 3054C turbocharged diesel rated at approximately 130 hp (97 kW) at 2200 rpm. The dual-branded AP-800D version uses the same engine. The earlier BG-230 predecessor used a different, lower-output non-turbo 3054 generation engine.
What is the operating weight of the Caterpillar BG-230D?
Roughly 12,000-13,600 kg (26,500-30,000 lb) depending on screed and configuration. An exact single factory figure for this serial range isn't consistently documented across available sources; check the data plate or your dealer for the configuration-specific weight.
What replaced the Caterpillar BG-230D asphalt paver?
No direct named successor is documented. The BG-230D followed the earlier BG-230 and was also sold as the AP-800D. Cat's current wheeled-paver lineup (AP300 through AP1055F, plus BG260C/D and BG2455C/D) doesn't list a confirmed one-to-one replacement for this model.
What BG-230D owners discuss
What's the propel system like on the BG-230D, and are there any known quirks?
Fully hydrostatic 4-range propel drives rubber tires, not tracks, with anti-slip control that shifts torque to the opposite drive wheel if one loses traction on wet or loose base material. Steering is a wheel, decoupled from propel speed, so turning doesn't slow the machine the way differential steering does on a tracked paver. The hydrostatic system itself is generally regarded as trouble-free when fluid stays clean and cool; contaminated or overheated hydraulic oil, not the pumps or motors, is the usual root cause behind erratic creep speed or a jerky start from rest. Have your dealer verify propel charge and relief pressures if crawl speed drifts or won't hold steady.
What issues come up with the 3054C engine in this paver?
The 3054C turbo diesel is mechanically simple and considered reliable when oil changes stay on schedule. Recurring complaints across this engine family center on three things: turbo oil starvation from delayed oil changes or restricted supply passages, which shortens turbo life; an intake air heater element that can fail or leak fuel, causing hard cold starts or white smoke; and oil or coolant seep at valve cover and turbo drain gaskets on higher-hour units. None of this is unique to the paver application, it's the same engine behavior reported wherever this powerplant is used. Have your dealer verify turbo oil supply pressure and check the intake heater circuit if cold starts are hard or smoke is excessive.
Any common electrical or sensor headaches on this generation of paver?
This generation of wheel paver typically runs sonic or contact grade and slope sensors, and the pattern across Cat grade-control setups holds here too: most sensor fault codes trace back to the wiring, not the sensor itself. Chafed harness insulation shorting the signal wire to ground or power, corroded connectors, or a weak ECM reference-voltage supply are the usual causes, so techs backprobe at the ECM before swapping a sensor. A second sonic sensor left powered near the one in use can also inject echo noise into the working signal. Have your dealer verify ECM sensor supply voltage and harness continuity before replacing a grade or slope sensor.
What wears out fastest on a wheel paver like this, and what should I inspect?
Same wear pattern as other feeder-and-screed pavers: auger flights, wear plates, and shafts take the brunt of abrasion from hot mix. Flights worn to a point, or any play when you grab and rock an auger shaft, mean the bearings and bushings are due. Feeder floor plates warp and conveyor chains sag with heat cycling over time. On the screed, the wear plate goes first, and tamper bar or vibratory pins and bushings need replacing before they let the screed sag or twist out of level. Because this is a wheel paver rather than a tracked one, drive tires and wheel bearings stand in for track undercarriage wear: check tread and sidewalls for heat-cycle cracking and confirm the wheel bearings run without play.
Is there a common complaint pattern with the screed heater or burner?
For torch-style screed heaters of this era, the consensus is that ignition failures usually come down to dirty burner ports, a fouled or misaligned igniter, or a weak flame sensor, rather than a failed control board. A screed that won't hold set temperature or cycles erratically points more often at wiring or sensor faults in the automatic screed-temperature control loop than at the burner hardware itself. Have your dealer verify the screed heat control wiring and flame sensor before condemning the burner.
What should I check before buying a used BG-230D?
Confirm the serial prefix on the machine tag reads B4G or A5P before trusting any listed spec sheet. Grab and rock the auger shaft and conveyor for bearing play; look for flights worn to a point. Inspect screed wear plates and the screed frame itself for cracks from repeated heat-cycle fatigue, and check tamper bar or vibratory pins and bushings for slop. Check drive tire condition and wheel-bearing play since this machine rides on rubber, not tracks. Run the propel through its full range and confirm a smooth, steady crawl speed with no jerk or drift. Pull any stored fault code history, paying attention to grade or slope sensor codes. Check engine oil for turbo debris or sludge and have turbo oil supply pressure tested. Ask for maintenance records covering screed heater service and hydraulic fluid changes, and walk the whole machine for weld repairs or patched wear plates, both signs of hard use. Have your dealer run a full pre-purchase inspection with fault code and hydraulic pressure checks before finalizing a deal.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific BG-230D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.