Caterpillarasphalt paver
Caterpillar BG-2255C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar BG-2255C is a late-1990s rubber-track asphalt paver, sold under the shared Barber-Greene/Caterpillar parts identity "AP-655C.BG-2255C." It runs a Cat 3056 inline six-cylinder diesel (3056E on the electronically governed variant), rated around 130 bkW (174 bhp) at 2200 rpm from 5.9 liters of displacement. Operating weight is about 18,630 kg (41,070 lb), with a transport footprint of roughly 6.65 m (21'10") long, 2.44 m (8'0") wide, and 2.97 m (9'9") tall. It pairs with the Extend-A-Mat 10-20B screed, paving from 3.05 to 6.1 m (10 to 20 ft) wide, offered with diesel or electric screed heat. Cat's own catalog structure ties the BG-2255C directly to the AP-655C lineage rather than treating it as a standalone model, and the machine shipped across two documented serial-prefix runs, CDG (earlier) and CKR (later), representing running production changes rather than a distinct model change.
Across its production run the BG-2255C/AP-655C saw the usual mid-life refinements for the era: tighter engine electronics on the 3056E variant, and incremental hydraulic and control updates between the CDG and CKR serial ranges rather than a major redesign. No confirmed direct successor model name carries the BG-2255C designation forward; parts and service support for this generation now route through the AP-655C parts and service lineage rather than a distinct next-generation nameplate. In the used and parts market the machine still turns up in municipal and mid-size paving fleets, valued for its simpler mechanical/early-electronic 3056 platform compared to later Tier-emissions pavers, and for the same Extend-A-Mat screed family used across multiple Cat paver generations. Buyers should expect wear concentrated in the rubber track undercarriage, tow-point hydraulics, and screed extension hardware rather than in the core engine or drivetrain, which are generally durable if fluids were maintained on schedule.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar BG-2255C specifications
Engine
| Engine model | Cat 3056 diesel, in-line 6-cylinder (paver shares its parts/service manual with the Cat AP-655C track paver, its Cat-branded twin) |
| Gross power | 130 bkW (174 bhp) at 2200 rpm |
| Displacement | 5.9 L (366 in3) |
| Cylinders | 6, in-line, 4-stroke-cycle diesel, turbocharged |
| Emissions tier | Not documented for this exact build (1999 machine, pre-electronic mechanical fuel system) — predates the later EUI 3056E used in Tier 2/3 markets. Verify against the data plate. |
Weights
| Operating weight (base machine, shared AP-655C platform figure) | approx. 18,630 kg (41,070 lb) — figure carries from the Cat-branded AP-655C twin; confirm against the BG-2255C data plate for your specific unit |
| Ground pressure | Not documented in available spec sources |
Dimensions
| Transport length | approx. 6.65 m (21 ft 10 in) |
| Transport width | approx. 2.44 m (8 ft 0 in) |
| Transport height | approx. 2.97 m (9 ft 9 in) |
| Track type | Rubber-track undercarriage, approx. 457 mm (18 in) wide tracks; no wheel-conversion option documented for this model |
| Screed | Extend-a-Mat 10-20B diesel-heated, extending screed rated 3.05 m to 6.1 m (10 ft to 20 ft) paving width |
| Ground clearance / track gauge | Not documented in available spec sources |
Performance
| Travel speed | Not confirmed for this exact 1990s generation — do not assume parity with the later reissued AP655/AP655F Mobil-Trac line, which is a different-era product |
| Paving speed | Not confirmed for this exact generation; treat published modern AP655-family paving-speed figures as unrelated |
| Gradeability | Not documented in available spec sources |
Service capacities (summary)
| Fuel tank | Not documented in available spec sources |
| Hydraulic system | Not documented in available spec sources |
| Engine oil | Not documented in available spec sources |
| Cooling system | Not documented in available spec sources |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
BG-2255C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat 3056/3056E, 6-cyl diesel | 14.8 L (3.91 US gal) | Cat DEO 10W-30 NA (multigrade). Cat DEO 15W-40 recommended where ambient runs -9°C to 50°C (16°F to 122°F); use the arctic-grade DEO below that range per the climate chart. |
| Cooling system | Not confirmed for this generation. Verify against the OMM or with a dealer. | Cat ELC (Extended Life Coolant), premixed or concentrate per the climate chart. |
| Fuel tank | Approximately 278 L (73 US gal) on the AP-655C/BG-2255C paver platform; treat as approximate pending OMM confirmation for this exact generation. | No. 2-D ultra low sulfur diesel (or equivalent per Cat's fuel spec); use a winterized blend or No. 1-D in cold ambient per the climate chart. |
| Hydraulic system and tank | Not confirmed as a distinct figure for this model. Verify against the OMM or with a dealer. | Cat HYDO Advanced 10. |
| Final drives (track drive units, each side) | Not documented in available public sources for this model. | Cat TDTO 50 (Transmission/Drive Train Oil). |
| Grease (spec only) | N/A - per standard Cat lubrication-point schedule, not a reservoir fill | Cat multipurpose grease (NLGI 2 lithium-complex type), per the standard Cat paver lubrication chart. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar BG-2255C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the BG-2255C beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S.O.S-style sampling on engine, hydraulic, and final drive oil to catch 3056/3056E wear trends before they show up as smoke or oil consumption. Track coolant condition closely since water-pump and crankcase gasket seepage is a known weak point on this engine family. Sample hydraulic oil around tow-point service intervals; rising particulate counts often precede pressure-reducing valve o-ring failure, a safety-critical steering issue on this paver.
Corrective & Common Repairs
Most field repairs on the BG-2255C trace to asphalt buildup packing against the inner rubber track face, accelerating sprocket and roller wear if not cleared daily. Tow-point hydraulic stiffness from worn pressure-reducing valve o-rings is a recurring safety complaint and should be corrected immediately, not deferred. Extend-A-Mat extension plates commonly drift out of adjustment under paving load; replace worn bushings and pins rather than just re-shimming.
Overhaul & Rebuild Points
Plan top-end work on the 3056/3056E around injector and turbocharger condition, checked at valve-lash intervals. Final drive travel motors and planetary reduction units warrant inspection at major oil-change milestones since they carry both propel and steering loads on rubber-track machines. Screed tamper and vibrator shaft bearings wear from constant compaction cycling and are a common rebuild item on higher-hour units.
Seasonal & Environment Servicing
Switch to Cat DEO 15W-40 for cold-weather starts down to -9C (16F) and confirm coolant freeze protection before winter storage. Ultrasonic grade and slope sensors drift with temperature swings and wind, so recalibrate at the start of each paving season and after storage. Clear tracks and hopper of hardened asphalt before layup to prevent seized extension mechanisms and rubber track cracking in cold storage.
BG-2255C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 067-6897 | Element Kit, Fuel Filter | Fuel system service | Check fitment → |
| 119-0073 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 132-7165 | Filter Element As-Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
| 054-1719 | Filter Element As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
BG-2255C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 100 - FMI 3 | Engine oil pressure sensor circuit reading voltage above normal range | Open sensor signal wire, corroded connector, or failed oil pressure sensor | Check sensor wiring and connector for damage/corrosion before replacing the sensor; verify with Cat ET if a diagnostic connector is fitted |
| CID 100 - FMI 4 | Engine oil pressure sensor circuit reading voltage below normal range | Shorted sensor signal wire to ground, or sensor failure | Inspect harness for chafing/shorts near the engine block, confirm actual oil pressure with a mechanical gauge before condemning the sensor |
| CID 110 - FMI 3 | Engine coolant temperature sensor circuit voltage above normal | Open circuit or disconnected coolant temp sensor connector | Check connector engagement and continuity to the ECM before replacing the sensor |
| CID 110 - FMI 4 | Engine coolant temperature sensor circuit voltage below normal | Shorted signal wire or failed sensor | Inspect wiring for shorts to ground, test sensor resistance against spec, replace if out of range |
| CID 111 - FMI 1 | Engine coolant level sensor reads below normal operating range (low coolant) | Low coolant level in the recovery bottle/radiator, air pocket, or failed level sensor/float | Check coolant level cold, inspect for external leaks, top off and clear before resuming operation |
| CID 174 - FMI 3 | Fuel temperature sensor circuit voltage above normal | Open circuit at the fuel temp sensor or harness connector | Inspect harness routing near the fuel filter base/injection pump, repair or replace connector |
| CID 190 - FMI 2 | Engine speed/timing sensor signal erratic, intermittent, or incorrect | Loose or contaminated timing sensor, damaged tone wheel signal, or wiring intermittent | Check sensor air gap and mounting, clean debris from sensor tip, inspect harness for intermittent connection |
| CID 41 - FMI 4 | 8-volt sensor supply circuit voltage below normal | Shorted sensor supply wire or overloaded 8V bus feeding multiple engine sensors at once | Disconnect sensors one at a time to isolate the shorted branch, repair harness, then recheck supply voltage |
| CID 254 - FMI 12 | Engine ECM (personality module) internal failure detected | ECM hardware fault or corrupted programming | Verify battery/charging voltage is in spec, then have a dealer check and reflash or replace the ECM if the fault persists |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
BG-2255C attachments & work tools
Screed - Extend-A-Mat 10-20B
Factory screed for this machine is the Barber-Greene-heritage Extend-A-Mat 10-20B, a hydraulically extending screed rated for roughly 3.0-6.1 m (10-20 ft) nominal paving width, up to about 5.9 m usable width and 300 mm max mat thickness. Curved nose-bar screed plates are abrasion-resistant alloy steel for precompaction and material flow.
Screed extenders and end gates
Extenders ride on two extendable support tubes plus a third frame member, with graduated scales showing extend/retract distance. End gates use a bolt-on design for quick plate installation or replacement, and extender vibrators are hydraulically driven, synchronized in frequency and amplitude to the main screed vibrator.
Screed heat option
Screed plates are ordered with either diesel-fired or electric heating elements (not both); either system reaches about 122 degC (220 degF) in 30 minutes or less at 22 degC (40 degF) ambient and above. Choice is set at build and reflected in separate wiring groups for diesel-heat vs electric-heat screeds in the parts catalog.
Grade and slope control kit
Automated grade/slope package available for this class uses averaging ski or sonic (ultrasonic) grade sensors plus a fluid-filled slope sensor referencing screed position, tied to a grade-and-slope control head. Treat as a dealer/factory-fit option rather than standard equipment; confirm exact sensor kit with your dealer for a given serial range.
Undercarriage
BG-2255C is the track version of this paver family, riding on rubber-track undercarriage (about 457 mm / 18 in wide tracks) rather than the wheeled arrangement used on some paver-class siblings. No wheel-conversion option is documented for this specific model.
Powertrain and material-handling system
Machine is powered by the Cat 3056 diesel and shares its base engine, hydraulic system, and auger-conveyor calibration procedures with the sibling AP-655C (both appear together in the same parts and Electronic Technician documentation set). Standard material handling is a dual auger conveyor paired with a dual drag-slat conveyor feeding the hopper to the screed.
Hopper and throughput capacity
Hopper capacity and rated throughput are not documented for this exact serial range in available sources; do not substitute the current-generation AP655 relaunch figures (different engine/electronics era) or the larger BG-2455C/BG-2455D sibling's numbers. Verify with your dealer or the machine's data plate.
All BG-2255C assemblies by section
Every catalogued assembly group for the Caterpillar BG-2255C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
183-8087 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
244-6976 Air Cleaner Gp
| 12***37 | Clip-Loop | 1 |
| 14***67 | Clamp; (Hose) | 1 |
| 17***93 | Tube As | 1 |
172-0993 Air Cleaner Gp
| 06***70 | Cap | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
310-9669 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
164-8500 Air Cleaner Gp
| 12***37 | Clip-Loop | 1 |
| 14***67 | Clamp; (Hose) | 1 |
| 16***00 | Air Cleaner Group | 1 |
236-1042 Elbow Gp-Air Inlet
| 21***95 | Connector | 1 |
| 21***96 | Gasket | 1 |
| 23***42 | Elbow Group-Air Inlet | 1 |
164-8501 Exhaust Gp
| 13***03 | Clamp-Muffler | 2 |
| 14***97 | Gasket | 1 |
| 16***01 | Exhaust Group | 1 |
204-6191 Shield Gp-Manifold
| 20***91 | Insulation | 1 |
| 20***92 | Insulation | 1 |
| 20***91 | Shield Group-Manifold | 1 |
237-2264 Turbocharger Gp
| 03***48 | Fitting-Brass | 1 |
| 10***53 | Stud | 6 |
| 10***66 | Gasket | 1 |
219-1853 Turbocharger Gp
| 03***48 | Fitting-Brass | 1 |
| 10***66 | Gasket | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
Basic Engine
216-8620 Camshaft Gp
| 15***56 | Camshaft | 1 |
| 21***20 | Camshaft Group | 1 |
221-6858 Cover Gp-Accessory Drive
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 21***03 | Washer; (Sealing) | 1 |
219-1805 Cover Gp-Valve Mechanism
| 10***04 | Gasket | 1 |
| 11***05 | Seal-O-Ring | 1 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
216-8316 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 0 |
216-8235 Cylinder Block Gp
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 14 |
| 06***05 | Plug | 1 |
216-8231 Cylinder Block Gp
| 20***18 | Housing As | 1 |
| 20***19 | Bolt; (M8x1.25x16-mm) | 10 |
| 21***31 | Cylinder Block Group | 1 |
216-8335 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 3 |
| 13***50 | Valve-Exhaust | 6 |
| 13***60 | Cap | 12 |
216-8343 Cylinder Head Gp
| 16***20 | Pin | 2 |
| 21***35 | Cylinder Head Group | 1 |
| 21***43 | Cylinder Head Group | 1 |
193-9182 Drive Gp-Pump
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 07***13 | Sleeve | 2 |
| 08***90 | Gear | 3 |
164-8504 Drive Gp-Pump -Hydrostatic
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 8 |
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 15***72 | Plug As | 1 |
146-0180 Fastener Gp-Cylinder Head
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
| 14***80 | Fastener Group-Cylinder Head | 1 |
228-7418 Fastener Gp-Cylinder Head
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
| 22***18 | Fastener Group-Cylinder Head | 1 |
233-8537 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 8 |
| 10***31 | Flywheel As | 1 |
217-1499 Gear Gp-Front
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 21***48 | Gear As-Idler; (31-Teeth) | 1 |
202-6749 Guard Gp-Belt
| 20***49 | Guard Group-Belt | 1 |
| 20***76 | Bracket As | 1 |
| 20***77 | Bracket | 1 |
234-2651 Housing Gp-Flywheel
| 10***17 | Plug | 3 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
221-6835 Housing Gp-Front
| 06***78 | Washer | 1 |
| 06***79 | Dowel | 1 |
| 06***97 | Element Kit, Fuel Filter | 1 |
221-6875 Lifting Gp-Engine
| 22***72 | Plate | 2 |
| 22***75 | Lifting Group-Engine | 1 |
| 6I***54 | Bolt; (M10x1.5x25-mm) | 4 |
235-6343 Mounting Gp-Alternator
| 23***43 | Mounting Group-Alternator | 1 |
| 6I***54 | Bolt; (M8x1.25x30-mm) | 2 |
| 6I***39 | Bolt; (M8x1.25x70-mm) | 1 |
164-8503 Mounting Gp-Engine
| 16***03 | Mounting Group-Engine | 1 |
| 19***35 | Plate As | 1 |
| 19***36 | Plate As | 1 |
273-5559 Mounting Gp-Engine
| 17***77 | Seal-O-Ring | 1 |
| 25***73 | Plug As; (6 Cyl Front Mtg) | 1 |
| 25***74 | Plug As | 6 |
170-3711 Mounting Gp-Fan Drive
| 17***11 | Mounting Group-Fan Drive | 1 |
| 6I***50 | Bolt; (M10x1.5x65-mm) | 4 |
219-1065 Pan Gp-Oil
| 11***26 | Pan As-Oil | 1 |
| 11***27 | Tube As | 1 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 1 |
216-8324 Piston & Rod Gp
| 06***83 | Bolt-Rod Cap | 2 |
| 12***36 | Ring-Retaining | 2 |
| 13***48 | Bushing | 1 |
239-1349 Plug Gp-Cylinder Block -Oil Gallery
| 06***24 | Plug | 2 |
| 23***49 | Plug Group-Cylinder Block; -Oil Gallery | 1 |
236-6604 Plug Gp-Cylinder Block
| 03***63 | Plug | 2 |
| 23***04 | Plug Group-Cylinder Block | 1 |
233-2765 Plug Gp-Engine -Timing Case
| 23***65 | Plug Group-Engine; -Timing Case | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 1 |
147-5488 Pulley Gp-Crankshaft
| 10***41 | Bolt; (M12x1.75x25-mm) | 8 |
| 10***54 | Pulley | 1 |
| 14***88 | Pulley Group-Crankshaft | 1 |
146-8956 Rocker Arm Gp
| 00***06 | Ring-Retaining | 2 |
| 06***83 | Plug-Shaft End | 2 |
| 06***87 | Spring-Shaft | 4 |
216-8619 Valve Mechanism Gp
| 06***95 | Rod | 12 |
| 13***53 | Tappet | 12 |
| 14***56 | Rocker Arm Group | 1 |
Braking System
194-2567 Pump & Valve Gp-Brake -Manual Release
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
| 14***24 | Tee As | 1 |
193-8539 Pump & Valve Gp-Brake -Manual Release
| 19***39 | Pump & Valve Group-Brake; -Manual Release | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
229-9476 Pump Gp-Hand -Manual Brake Release
| 22***76 | Pump Group-Hand; -Manual Brake Release | 1 |
| 23***43 | Knob | 1 |
| 31***34 | Kit-Seal; (Check Valve) | 1 |
Controls
102-2703 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 1 |
| 10***47 | Gear-Worm | 1 |
| 10***50 | Guide-Bushing | 1 |
206-6698 Adjuster Gp-Height
| 10***24 | Tube As; (Vertical) | 4 |
| 10***39 | Key-Square | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
8i-0257 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 2 |
| 10***04 | Bolt-Shoulder | 2 |
| 10***24 | Tube As; (Vertical) | 4 |
197-9844 Chain Gp-Screed
| 10***87 | Link-Connecting | 1 |
| 19***33 | Link-Offset | 1 |
| 19***44 | Chain Group-Screed | 1 |
197-5288 Crown Gp
| 10***39 | Key-Square | 1 |
| 11***50 | Sprocket; (12-Teeth) | 1 |
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 1 |
120-5898 Crown Gp-Manual
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 05***09 | Bolt-Socket Head | 4 |
| 10***87 | Link-Connecting | 1 |
196-2503 Jack Gp-Height Adjuster
| 10***64 | Bearing-Thrust | 2 |
| 11***49 | Worm | 1 |
| 19***03 | Jack Group-Height Adjuster | 1 |
102-2699 Jack Gp-Sloper
| 10***99 | Jack Group-Sloper | 1 |
| 10***46 | Gear-Worm | 1 |
| 10***49 | Guide-Bushing | 1 |
197-9849 Shaft Gp-Drive -Rear
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***45 | Spindle As | 1 |
197-9850 Shaft Gp-Drive -Front
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***12 | Spindle As | 1 |
8i-0213 Sloper Gp-Manual
| 06***93 | Lockwasher-Bearing | 2 |
| 10***99 | Jack Group-Sloper | 2 |
| 10***00 | . Axle, Rod End | 2 |
Cooling System
228-7387 Connection Gp-Water
| 14***15 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
| 14***88 | Seal; (Housing, Regulator)(Temperature Regulator Housing) | 1 |
| 16***36 | Ring; (Water Temperature Regulator) | 1 |
235-6342 Cooler Gp-Fltr Base & Eng Oil
| 12***15 | Head As-0il Filter; (Engine) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 14 |
| 14***83 | Bolt; (M10x1.5x45-mm)(Starter Motor) | 1 |
221-5369 Pump Gp-Water
| 10***71 | Bolt | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 3 |
| 14***05 | Cover | 1 |
216-9735 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 10***71 | Bolt | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 3 |
222-2617 Radiator & Hyd Oil Cooler Gp
| 03***19 | Cap As-Radiator | 1 |
| 22***17 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 23***76 | Radiator As | 1 |
164-8502 Radiator & Hyd Oil Cooler Gp
| 09***61 | Hose As | 1 |
| 13***55 | U-Bolt | 1 |
| 14***37 | Connector As | 1 |
Electrical And Starting System
3e-6328 Alarm Gp -Caterpillar Monitoring System
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
123-6449 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***49 | Alarm Group | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
200-8281 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
194-0876 Alternator Gp-Charging
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 11***01 | Alternator Group-Charging | 1 |
| 11***37 | Pulley-Idler; (1-Groove) | 1 |
114-2401 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 4 |
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
198-5275 Battery & Wiring Gp
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 10***03 | Plate-Cover | 1 |
| 10***05 | Plate | 5 |
9w-0742 Block Gp-Junction -Battery
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
| 8C***58 | Block Group-Junction; (Battery) | 1 |
194-3802 Box Gp-Control
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 28 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
174-1772 Box Gp-Junction
| 14***46 | Film-Warning; (High Voltage) | 1 |
| 17***11 | Block-Terminal; (600-Volt, 50-Ampere) | 1 |
| 17***12 | Rail; (8-cm Each) | 0 |
175-7736 Box Gp-Junction
| 17***82 | Film-Warning; (High Voltage) | 1 |
| 17***83 | Film-Identification; (Electrical Outlet) | 1 |
| 17***36 | Box Group-Junction | 1 |
122-9309 Buffer Gp-Sensor -5000-Hz Pwm
| 12***09 | Buffer Group-Sensor; -5000-Hz Pwm-Conveyor Speed | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
122-9303 Buffer Gp-Sensor -Material Height
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
210-6776 Control Gp-Unprogrammed -Machine
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 20***41 | Control Group-Unprogrammed; -Machine | 1 |
| 21***47 | Film-Identification; (Label) | 1 |
232-0728 Cover Gp-Wiring Harness
| 23***28 | Cover Group-Wiring Harness | 1 |
| 24***28 | Link; (Plastic) | 18 |
| 24***29 | Kit-Bracket; (Wiring Harness Cover) | 1 |
184-0915 Electrical Ar
| 18***15 | Electrical Ar | 1 |
| 19***81 | Wiring Group-Machine; -Lh | 1 |
| 19***82 | Wiring Group-Machine; -Rh | 1 |
241-1880 Electronics Gp-Machine
| 24***80 | Electronics Group-Machine | 1 |
| 24***36 | Service Group-Machine | 1 |
| 25***71 | Software Group-Machine | 1 |
241-1879 Electronics Gp-Monitor
| 22***70 | Software Group-Monitor; (Caterpillar Monitoring System) | 1 |
| 22***71 | Service Group-Monitor; (Caterpillar Monitoring System) | 1 |
| 24***79 | Electronics Group-Monitor | 1 |
203-4244 Generator Gp-Hydraulic -8 Kilowatt
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Clip | 1 |
| 17***72 | Box Group-Junction | 1 |
219-6313 Generator Gp-Hydraulic -8 Kilowatt
| 17***44 | Fan | 1 |
| 17***45 | Support | 2 |
| 17***46 | Brush | 6 |
203-2209 Generator Gp-Hydraulic -8 Kilowatt
| 14***46 | Film-Warning; (High Voltage) | 1 |
| 14***16 | Connector Group | 1 |
| 14***88 | Elbow Group | 2 |
162-3294 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
105-4849 Lamp Gp-Head & Signal -Lh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
105-4850 Lamp Gp-Head & Signal -Rh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
107-4401 Lamp Gp-Signal -Stop, Tail
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***01 | Lamp Group-Signal; (24-Volt, Stop, Tail)(Stop, Tail) | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
162-5402 Lamp Gp-Signal -Front
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***02 | Lamp Group-Signal; -Front | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 3 |
107-4402 Lamp Gp-Signal -Rear Turn
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***02 | Lamp Group-Signal; -Rear Turn | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
198-8283 Lighting Gp-Flood
| 19***83 | Lighting Group-Flood | 1 |
| 20***38 | Bracket | 2 |
| 5D***35 | Grommet | 4 |
207-7957 Lighting Gp-Roading
| 09***92 | Locknut; (M6x1-Thd) | 18 |
| 10***49 | Reflector-Yellow | 6 |
| 10***50 | Reflector-Red | 2 |
198-8284 Lighting Gp-Warning Beacon
| 03***14 | Screw; (10-32x1-In) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
170-7071 Motor Gp-Electric -Fuel Transfer Pump
| 09***47 | Brush As | 1 |
| 11***94 | Bell; (Rear) | 1 |
| 11***61 | Bearing | 2 |
198-6773 Panel Gp-Circuit Breaker
| 11***05 | Film-Identification; (Service Meter) | 1 |
| 11***18 | Clip | 1 |
| 11***29 | Washer; (6.6x22x2-mm Thk) | 4 |
145-8519 Sensor Gp-Auger
| 11***24 | Clamp | 2 |
| 14***19 | Sensor Group-Auger | 1 |
| 16***41 | Support-Sensor | 2 |
198-8279 Sensor Gp-Auger
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 11***07 | Knob | 2 |
| 12***44 | Paddle As | 2 |
195-8090 Sensor Gp-Position -Steering
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 19***90 | Sensor Group-Position; -Steering | 1 |
219-2385 Sensor Gp-Position -Auger
| 12***50 | Receptacle As | 1 |
| 12***51 | Bushing | 1 |
| 12***52 | Clamp As-Cable | 1 |
284-8876 Sensor Gp-Position
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 28***76 | Sensor Group-Position | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
228-7461 Starting Aid Gp -Heater
| 22***61 | Starting Aid Group; -Air Inlet Heater | 1 |
| 24***63 | Lockwasher | 1 |
| 25***60 | Heater As; (Air Inlet) | 1 |
235-6362 Starting Aid Gp -Lines
| 03***55 | Valve As-Check; (Starting Aid Heater Lines) | 1 |
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
207-1516 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
159-5029 Starting Motor Gp-Electric
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 3 |
| 15***29 | Starting Motor Group-Electric | 1 |
| 16***04 | Spacer | 1 |
168-3499 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
172-8660 Switch Gp-Liquid Level -Hydraulic Tank
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
241-8368 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
175-2309 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***81 | Switch As-Magnetic; (Start Relay) | 1 |
167-0138 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
254-3783 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
192-5087 Wiring Gp-Console -Operator
| 10***05 | Cap-Receptacle | 2 |
| 11***35 | Electronic Control Group | 2 |
| 11***18 | Clip | 14 |
191-2846 Wiring Gp-Console -Auxiliary Steering
| 19***46 | Wiring Group-Console; -Auxiliary Steering | 1 |
| 19***70 | Harness As; (Auxiliary Steering) | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 6 |
192-5086 Wiring Gp-Console -Center Console
| 10***03 | Plate-Cover | 1 |
| 10***49 | Plate | 1 |
| 11***18 | Clip | 1 |
219-2462 Wiring Gp-Electronic Control
| 10***58 | Bolt; (M8x1.25x14-mm) | 3 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
| 14***83 | Bolt; (M10x1.5x45-mm)(Starter Motor) | 1 |
215-8089 Wiring Gp-Hydraulic Generator
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***18 | Clip | 1 |
192-5082 Wiring Gp-Machine -Rh
| 10***04 | Suppressor As-Arc | 2 |
| 11***01 | Plate-Face | 1 |
| 11***29 | Cap-Dust | 1 |
192-5081 Wiring Gp-Machine -Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 2 |
| 11***01 | Plate-Face | 1 |
192-5085 Wiring Gp-Machine -Main
| 11***18 | Clip | 3 |
| 12***49 | Alarm Group | 1 |
| 18***40 | Harness As; (Main) | 1 |
192-5084 Wiring Gp-Power Train
| 11***84 | Ring-Terminal; (2-Ga, 1/4-In Screw) | 1 |
| 11***18 | Clip | 12 |
| 13***40 | Resistor As-Connection; (3-Pin) | 1 |
244-4975 Wiring Gp-Screed -Electric Heat
| 19***98 | Panel Group-Electronic; -Material Height-Rh | 1 |
| 19***99 | Panel Group-Electronic; -Material Height-Lh | 1 |
| 24***45 | Harness As-Screed; (Paver To Screed) | 1 |
217-0739 Wiring Gp-Screed -Electric Heat
| 19***98 | Panel Group-Electronic; -Material Height-Rh | 1 |
| 19***99 | Panel Group-Electronic; -Material Height-Lh | 1 |
| 21***39 | Wiring Group-Screed; -Electric Heat | 1 |
Electrical System
196-1298 Panel Gp-Electronic -Material Height-Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***83 | Relay-Time Delay; (Electric Heat) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
196-1299 Panel Gp-Electronic -Material Height-Lh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 13***48 | Potentiometer As; (Rh Conveyor Speed Dial) | 1 |
Engine Arrangement
164-8499 Engine Ar
| 14***05 | Adapter Group | 1 |
| 15***23 | Valve-Sampling; (Engine Coolant) | 1 |
| 15***29 | Starting Motor Group-Electric | 1 |
176-3155 Engine Ar-Primary
| 14***80 | Fastener Group-Cylinder Head | 1 |
| 14***88 | Pulley Group-Crankshaft | 1 |
| 17***11 | Mounting Group-Fan Drive | 1 |
184-0920 Installation Ar-Engine
| 16***99 | Engine Ar | 1 |
| 16***00 | Air Cleaner Group | 1 |
| 16***01 | Exhaust Group | 1 |
Feeder Drag And Auger Conveyors
191-4422 Auger Gp
| 12***54 | Screw-Flat Head; (M12x1.75x35-mm) | 10 |
| 16***89 | Bolt-Hex Head; (M16x2x55mm) | 4 |
| 19***21 | Conveyor Group-Auger | 1 |
201-5584 Bearing Gp-Auger
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
| 20***84 | Bearing Group-Auger | 1 |
106-9718 Bearing Gp-Auger
| 01***41 | Setscrew-Socket | 3 |
| 10***18 | Bearing Group-Auger | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
116-9509 Bearing Gp-Auger
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***09 | Bearing Group-Auger | 1 |
105-9278 Chain Gp-Conveyor -Rh
| 10***78 | Chain Group-Conveyor; -Rh | 1 |
| 8I***14 | Bar-Side | 58 |
| 8I***15 | Bar-Side | 29 |
134-3956 Chain Gp-Conveyor -Lh
| 13***56 | Chain Group-Conveyor; -Lh | 1 |
| 8I***14 | Bar-Side | 58 |
| 8I***15 | Bar-Side | 29 |
107-5892 Chain Gp-Conveyor
| 10***78 | Chain Group-Conveyor; -Rh | 1 |
| 10***92 | Chain Group-Conveyor | 1 |
| 13***56 | Chain Group-Conveyor; -Lh | 1 |
184-0919 Conveyor Ar-Drag & Auger
| 18***19 | Conveyor Ar-Drag & Auger | 1 |
| 19***22 | Auger Group | 1 |
| 19***45 | Guard Group-Conveyor | 1 |
191-4421 Conveyor Gp-Auger
| 10***85 | Plate | 2 |
| 10***91 | Pipe | 2 |
| 10***96 | Plate | 1 |
192-5448 Conveyor Gp-Drag
| 05***20 | Pin-Spring | 58 |
| 10***92 | Chain Group-Conveyor | 1 |
| 12***46 | Bar-Feeder | 29 |
199-4253 Door Gp-Access
| 10***56 | Rod; (Prop) | 3 |
| 11***77 | Bumper-Rubber | 11 |
| 14***03 | Screw-Button Head; (M10x1.5x30-mm) | 39 |
192-9376 Drive Gp-Conveyor
| 10***99 | Sprocket As; (12-Teeth) | 2 |
| 13***92 | Key-Square | 2 |
| 19***62 | Planetary Group-Conveyor | 2 |
231-2042 Extension Gp-Auger -24-In, Rh
| 23***42 | Extension Group-Auger; -24-In, Rh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
198-8287 Extension Gp-Auger -12-In, Rh
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
231-2043 Extension Gp-Auger -24-In, Lh
| 23***43 | Extension Group-Auger; -24-In, Lh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
199-4206 Extension Gp-Auger -12-In, Lh
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
231-3532 Extension Gp-Auger -6-In
| 23***32 | Extension Group-Auger; -6-In | 1 |
| 31***84 | Tube | 2 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 2 |
215-1870 Footshaft Gp
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
192-5445 Guard Gp-Conveyor
| 12***54 | Screw-Flat Head; (M12x1.75x35-mm) | 64 |
| 19***32 | Guard As | 4 |
| 19***33 | Guard As | 4 |
191-0012 Hydraulic Ar-Conveyor -Material Feed
| 19***53 | Pump & Mtg Group-Conveyor; -Material Feed | 1 |
| 19***58 | Motor & Mtg Group-Conveyor | 1 |
| 19***59 | Motor & Mtg Group-Auger | 1 |
244-3759 Kit-Housing
| 13***63 | Bearing | 2 |
| 24***25 | Kit-Shim; (Axle Bearing) | 1 |
| 24***59 | Kit-Housing | 1 |
191-4411 Planetary Gp-Auger
| 09***92 | Pin-Spring | 2 |
| 13***16 | Kit-Washer; (Planetary) | 1 |
| 13***30 | Plug-Magnetic; (Planetary) | 1 |
192-7962 Planetary Gp-Conveyor
| 09***92 | Pin-Spring | 2 |
| 13***63 | Bearing | 1 |
| 16***54 | Seal | 1 |
190-9953 Pump & Mtg Gp-Conveyor -Material Feed
| 14***22 | Adapter; (-10orb/-12orfs) | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***55 | Elbow As. | 1 |
193-1077 Shaft Gp-Feeder Drive
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 4 |
| 10***30 | Bearing-Flange | 2 |
| 10***70 | Key-Square | 2 |
Frame And Body
119-7093 Arm Gp-Drop
| 10***68 | Nipple-Pipe | 2 |
| 11***99 | Pin As-Pivot | 2 |
| 11***93 | Arm Group-Drop | 1 |
221-4345 Arm Gp-Drop
| 11***99 | Pin As-Pivot | 2 |
| 13***20 | Shaft | 2 |
| 13***77 | Lockout | 2 |
253-1002 Arm Gp-Drop
| 10***68 | Nipple-Pipe | 2 |
| 11***99 | Pin As-Pivot | 2 |
| 25***02 | Arm Group-Drop | 1 |
194-8190 Arm Gp-Tow
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 19***52 | Support As | 2 |
| 19***19 | Roller | 4 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
232-1107 Bracket Gp-Support
| 22***51 | Bracket | 1 |
| 23***07 | Bracket Group-Support | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
206-6689 Carriage Gp-Extender
| 18***25 | Scraper; (Brass) | 4 |
| 19***57 | Scraper As | 4 |
| 1A***68 | Nut | 6 |
194-8171 Cover Gp-Paver Ventilation
| 19***34 | Fender; (Rh) | 1 |
| 19***35 | Fender; (Lh) | 1 |
| 19***71 | Cover Group-Paver Ventilation | 1 |
205-4712 Cover Gp-Platform -Without Ventilation
| 14***60 | Plate | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
| 14***11 | Plug Group | 1 |
8i-0291 Deflector Gp
| 10***31 | Nut-Spring | 8 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 8 |
| 10***82 | Scale; (Rh)(Screed Ext) | 1 |
206-6699 Deflector Gp
| 16***24 | Rod-Threaded | 4 |
| 16***25 | Rod-Threaded | 4 |
| 16***26 | Turnbuckle | 4 |
231-2035 Extension Gp-Main Frame
| 12***20 | Shim; (1.65-mm Thk) | 4 |
| 22***49 | Bar | 2 |
| 22***50 | Bar; (Rh) | 1 |
215-7553 Extension Gp-Main Frame
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
231-1982 Extension Gp-Main Frame -12-In
| 10***88 | Extension As | 1 |
| 23***82 | Extension Group-Main Frame; -12-In | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
231-1983 Extension Gp-Main Frame -24-In
| 10***90 | Extension As | 1 |
| 23***83 | Extension Group-Main Frame; -24-In | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
188-9272 Frame As -Paver
| 18***72 | Frame As; -Paver | 1 |
| 18***84 | Frame Group | 1 |
| 20***21 | Plate As | 1 |
206-6690 Frame Gp-Screed
| 10***68 | Grip-Handle | 2 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 6 |
| 10***82 | Scale; (Rh)(Screed Ext) | 1 |
120-5906 Frame Gp-Screed
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
216-6989 Gate Gp-End
| 10***68 | Grip-Handle | 2 |
| 10***35 | Support As | 2 |
| 10***09 | Chain; (14-In Each) | 0 |
145-9438 Gate Gp-End
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***68 | Grip-Handle | 2 |
| 10***70 | Support As | 2 |
199-4196 Guide Gp-Steering
| 03***74 | Keeper | 1 |
| 10***39 | Tube As | 1 |
| 10***78 | Block | 1 |
190-7438 Hopper Gp
| 11***16 | Boss; (M12x1.75x20-mm) | 1 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
| 15***74 | Bolt-Round Head; (M12x1.75x60-mm) | 25 |
194-8172 Lines Gp-Grease
| 10***76 | Clamp-Half | 8 |
| 14***89 | Hose As | 2 |
| 14***20 | Connector As | 4 |
195-2382 Lock Gp-Transport
| 19***82 | Lock Group-Transport | 1 |
| 25***97 | Bar | 2 |
| 8T***75 | Bolt; (M16x2x90-mm) | 2 |
8i-0176 Plate Gp-Screed -Diesel Heat
| 14***06 | Plate-Main | 1 |
| 14***08 | Plate; (Rh) | 1 |
| 14***09 | Plate; (Lh) | 1 |
206-6695 Plate Gp-Screed -Diesel Heat
| 18***31 | Bolt-Special; (1 1/4-12-2athd) | 4 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 20***95 | Plate Group-Screed; -Diesel Heat | 1 |
190-6582 Structural Ar
| 19***82 | Structural Ar | 1 |
| 19***90 | Arm Group-Tow | 1 |
| 19***21 | Beam Group-Transverse | 1 |
231-1956 Support Gp-Frame
| 10***89 | Brace Group | 1 |
| 23***56 | Support Group-Frame | 1 |
| 23***07 | Bracket Group-Support | 1 |
196-0174 Suppression Gp-Sound
| 11***62 | Washer | 16 |
| 19***74 | Suppression Group-Sound | 1 |
| 20***03 | Panel-Foam | 1 |
192-3779 Ventilation Gp-Paver -Fumes Abatement
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***57 | Plate | 1 |
Fuel System
141-7844 Base Gp-Fuel Filter
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
112-3464 Burner Gp -Diesel Heat
| 03***12 | Screw-Forming; (10-24x0.5-In) | 20 |
| 10***98 | . Roller (With Bushing), Housing-Blower | 4 |
| 10***25 | Adapter | 4 |
206-6693 Burner Gp -Diesel Heat
| 03***12 | Screw-Forming; (10-24x0.5-In) | 16 |
| 10***98 | . Roller (With Bushing), Housing-Blower | 4 |
| 10***25 | Adapter | 4 |
164-4858 Cap Gp-Fuel Filler -Extreme Service, Lockable
| 16***58 | Cap Group-Fuel Filler; -Extreme Service, Lockable | 1 |
| 19***75 | Cover As-Filter; (Fuel Cap) | 1 |
| 9X***00 | Seal-O-Ring | 1 |
201-7654 Cover Gp-Fuel Tank
| 20***53 | Plate | 1 |
| 20***54 | Cover Group-Fuel Tank | 1 |
| 6V***98 | Bolt; (M5x0.8x16-mm) | 5 |
235-6347 Filter Gp-Fuel
| 14***44 | Base Group-Fuel Filter | 1 |
| 23***47 | Filter Group-Fuel; -Secondary | 1 |
164-8505 Lines Gp-Fuel
| 06***51 | Clamp | 2 |
| 10***03 | Plate-Cover | 4 |
| 14***07 | Adapter As | 1 |
235-6367 Lines Gp-Fuel Filter
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 23***67 | Lines Group-Fuel Filter | 1 |
192-4302 Pump Gp-Fuel
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
| 13***76 | Strainer; (Fuel Pump) | 1 |
235-6331 Pump Gp-Fuel Injection
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 10***77 | Stud | 3 |
| 10***74 | Stud | 1 |
191-8575 Pump Gp-Fuel Transfer -Mounting
| 11***72 | Filter Group-Fuel; (Fuel) | 1 |
| 11***73 | Filter Element-Fuel | 1 |
| 12***44 | Hose Assem. | 1 |
219-2455 Pump Gp-Fuel Transfer
| 03***49 | Plug | 1 |
| 06***68 | Nut-Fuel Line; (1/2-In) | 3 |
| 06***69 | Olive-Fuel Tube | 7 |
149-2683 Separator Gp-Water
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
Grade References
109-5623 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5625 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 7 |
| 08***11 | Shoe-Pan | 1 |
| 08***38 | Channel | 2 |
109-5628 Leveler Gp -30-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5627 Leveler Gp -40-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5626 Leveler Gp -Outboard
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***26 | Leveler Group; -Outboard | 1 |
109-5622 Leveler Gp -40-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5624 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***24 | Leveler Group; -30-Ft Grade Reference | 1 |
Hydraulic System
209-4549 Accumulator Gp-Hydraulic -Uncharged
| 13***64 | Cap | 1 |
| 13***65 | Screw | 1 |
| 13***66 | Seal | 1 |
209-2659 Accumulator Gp-Hydraulic -Charged
| 20***59 | Accumulator Group-Hydraulic; -Charged | 1 |
| 20***72 | Film-Warning; (Accumulator) | 1 |
111-8993 Cap & Strainer Gp-Hyd Oil Fill
| 11***93 | Cap & Strainer Group-Hydraulic Oil Fill | 1 |
| 3G***61 | Gasket | 1 |
| 4B***82 | Ball; (9.52mm) | 1 |
190-9989 Cylinder & Mtg Gp-Auger
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 4 |
| 17***51 | Pin-Clevis | 4 |
| 19***89 | Cylinder & Mtg Group-Auger | 1 |
190-8795 Cylinder & Mtg Gp-Hopper
| 09***61 | Hose As | 1 |
| 10***44 | Elbow | 1 |
| 12***09 | Screw-Flat Head; (M10x1.5x20-mm) | 4 |
190-8796 Cylinder & Mtg Gp-Screed Hoist -Tow Point
| 14***63 | Elbow Group | 2 |
| 14***11 | Plug Group | 2 |
| 17***51 | Pin-Clevis | 2 |
195-2881 Cylinder & Mtg Gp-Tow Point
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 14***74 | Elbow As | 4 |
| 17***51 | Pin-Clevis | 4 |
194-7259 Cylinder Gp-Hydraulic
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 19***59 | Cylinder Group-Hydraulic; -Auger, Rh | 1 |
| 23***20 | Kit-Plug; (Auger Cylinder) | 1 |
194-7260 Cylinder Gp-Hydraulic -Auger, Lh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 19***60 | Cylinder Group-Hydraulic; -Auger, Lh | 1 |
| 23***18 | Kit-Seal; (Auger Cylinder, Lh) | 1 |
135-0220 Cylinder Gp-Hydraulic -Hopper
| 13***20 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 13***21 | Kit-Seal; (Hopper Cylinder) | 1 |
| 5E***32 | Ring | 1 |
216-0185 Cylinder Gp-Hydraulic -Tow Point
| 21***85 | Cylinder Group-Hydraulic; -Tow Point | 1 |
| 23***55 | Kit-Seal; (Tow Point Cylinder) | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
197-9766 Cylinder Gp-Hydraulic -Slope
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 14***61 | Plug | 2 |
| 14***62 | Seal-Washer | 2 |
206-6682 Cylinder Gp-Hydraulic -Extender
| 20***62 | Kit-Seal; (Extender Cylinder) | 0 |
| 20***82 | Cylinder Group-Hydraulic; -Extender | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
135-0218 Cylinder Gp-Hydraulic -Extender
| 03***39 | Ring-Back-Up | 1 |
| 12***75 | Ring-Wear | 2 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 1 |
195-2884 Cylinder Gp-Hydraulic -Tow Point
| 19***84 | Cylinder Group-Hydraulic; -Tow Point | 1 |
| 23***82 | Kit-Seal; (Tow Point Cylinder) | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
196-7616 Filter & Mtg Gp-Hydraulic -Material Feed
| 14***47 | Elbow; (-12 Orb/Orfs) | 3 |
| 19***17 | Filter Group-Oil; -Hydraulic | 1 |
| 19***16 | Filter & Mtg Group-Hydraulic; -Material Feed | 1 |
196-7617 Filter & Mtg Gp-Hydraulic -Propel
| 14***47 | Elbow; (-12 Orb/Orfs) | 4 |
| 16***31 | Elbow As | 1 |
| 19***14 | Filter Group-Oil; -Hydraulic | 2 |
197-0743 Filter & Mtg Gp-Hydraulic -Vibratory
| 14***47 | Elbow; (-12 Orb/Orfs) | 2 |
| 19***15 | Filter Group-Oil; -Hydraulic | 1 |
| 19***43 | Filter & Mtg Group-Hydraulic; -Vibratory | 1 |
244-6975 Filter & Mtg Gp-Hydraulic -Propel
| 14***47 | Elbow; (-12 Orb/Orfs) | 4 |
| 16***31 | Elbow As | 1 |
| 19***14 | Filter Group-Oil; -Hydraulic | 2 |
196-7615 Filter Gp-Oil -Hydraulic
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 19***15 | Filter Group-Oil; -Hydraulic | 1 |
| 20***75 | Filter-Oil; (Advanced Efficiency) | 1 |
196-7614 Filter Gp-Oil -Hydraulic
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 19***14 | Filter Group-Oil; -Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 17***15 | Filter Group-Oil; -Hydraulic Tank | 1 |
192-0717 Filter Gp-Oil -Hydraulic
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 19***17 | Filter Group-Oil; -Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
191-0014 Hydraulic Ar -Auxiliary
| 19***95 | Cylinder & Mtg Group-Hopper | 1 |
| 19***96 | Cylinder & Mtg Group-Screed Hoist; -Tow Point | 1 |
| 19***54 | Pump & Mtg Group-Auxiliary | 1 |
190-6460 Hydraulic Ar -Propel
| 19***60 | Hydraulic Ar; -Propel | 1 |
| 19***61 | Pump & Mtg Group-Propel | 1 |
| 19***66 | Motor & Mtg Group-Propel | 1 |
191-0016 Hydraulic Ar -Fan Drive
| 19***55 | Pump & Mtg Group-Hydraulic Fan | 1 |
| 19***60 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 19***65 | Valve & Mtg Group-Hydraulic Fan | 1 |
184-0916 Hydraulic Ar
| 18***16 | Hydraulic Ar | 1 |
| 19***60 | Hydraulic Ar; -Propel | 1 |
| 19***12 | Hydraulic Ar-Conveyor; -Material Feed | 1 |
191-0013 Hydraulic Ar-Vibratory
| 19***62 | Valve & Mtg Group-Vibratory | 1 |
| 19***13 | Hydraulic Ar-Vibratory | 1 |
| 19***43 | Filter & Mtg Group-Hydraulic; -Vibratory | 1 |
198-6164 Lines Gp-Auxiliary Hydraulic
| 10***05 | Plate | 1 |
| 14***44 | Plate-Retainer | 2 |
| 15***14 | Hose Assem. | 1 |
198-6163 Lines Gp-Brake & Shift
| 10***05 | Plate | 9 |
| 15***56 | Tee As | 2 |
| 15***21 | Hose As | 1 |
198-6104 Lines Gp-Conveyor -Material Feed
| 10***05 | Plate | 2 |
| 10***85 | Hose As | 1 |
| 11***52 | Hose As | 1 |
198-6162 Lines Gp-Cylinder -Auger Hoist
| 10***05 | Plate | 8 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
| 15***81 | Clamp-Half | 16 |
206-6691 Lines Gp-Extender
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 14***18 | Connector As | 2 |
| 14***74 | Elbow As | 2 |
112-3468 Lines Gp-Extension
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 11***68 | Lines Group-Extension | 1 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 2 |
200-3197 Lines Gp-Grade & Slope
| 10***05 | Plate | 4 |
| 11***34 | Hose Assem. | 1 |
| 12***62 | Hose Assem. | 2 |
234-4395 Lines Gp-Hitch -Truck
| 10***03 | Plate-Cover | 2 |
| 14***18 | Connector As | 1 |
| 14***61 | Elbow Group | 2 |
198-6161 Lines Gp-Hopper
| 10***05 | Plate | 10 |
| 10***06 | Plate As | 2 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
198-6166 Lines Gp-Hydraulic Fan
| 14***44 | Plate-Retainer | 1 |
| 15***92 | Bolt-Stacking; (M8x1.25x61-mm) | 3 |
| 17***20 | Strap-Dual Clamp | 2 |
198-6167 Lines Gp-Hydraulic Generator
| 10***79 | Hose Assem. | 1 |
| 13***28 | Clamp; (Half) | 2 |
| 14***44 | Plate-Retainer | 2 |
198-6165 Lines Gp-Hydraulic Oil Cooler
| 19***65 | Lines Group-Hydraulic Oil Cooler | 1 |
| 1P***82 | Flange-Half | 2 |
| 20***15 | Hose As | 1 |
198-6172 Lines Gp-Paver Ventilation -Fumes
| 12***43 | Hose As | 1 |
| 14***74 | Elbow As | 1 |
| 16***69 | Adapter; (Str Thd (-6) Orfs/0) | 1 |
198-6159 Lines Gp-Screed -Lift And Extend
| 10***23 | Hose As | 1 |
| 10***76 | Hose As | 1 |
| 14***66 | Elbow Group | 2 |
197-5285 Lines Gp-Slope
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***84 | Pin As | 4 |
191-4902 Lines Gp-Track Tension
| 10***05 | Plate | 2 |
| 13***74 | Hose As | 1 |
| 14***75 | Elbow Group | 2 |
198-6171 Lines Gp-Truck Hitch -Truck
| 10***03 | Plate-Cover | 2 |
| 11***14 | Hose As | 1 |
| 13***18 | Tube As | 2 |
112-3466 Lines Gp-Vibratory
| 07***84 | Clamp | 6 |
| 08***86 | Clamp | 2 |
| 10***84 | Hose As | 2 |
206-6692 Lines Gp-Vibratory
| 10***05 | Plate | 7 |
| 14***09 | Adapter As | 2 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
232-0726 Lines Gp-Vibratory
| 10***05 | Plate | 7 |
| 14***09 | Adapter As | 2 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
198-6158 Lines Gp-Vibratory
| 08***99 | Hose As | 1 |
| 11***77 | Hose As | 1 |
| 12***66 | Hose As | 1 |
197-7419 Manifold & Valve Gp -Return, Oil Cooler Bypass
| 14***27 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
197-7420 Manifold Gp-Hydraulic -Auxiliary Pressure
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***63 | Elbow Group | 1 |
197-7421 Manifold Gp-Return -Pump
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
190-9959 Motor & Mtg Gp-Auger
| 11***80 | Elbow | 1 |
| 14***09 | Adapter As | 2 |
| 14***27 | Connector Group | 2 |
190-9958 Motor & Mtg Gp-Conveyor
| 11***34 | Connector | 1 |
| 14***72 | Elbow Group | 4 |
| 14***30 | Tee As | 4 |
190-9960 Motor & Mtg Gp-Hydraulic Fan
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 2 |
| 15***37 | Elbow Group | 1 |
190-6466 Motor & Mtg Gp-Propel
| 14***28 | Connector Assem. | 1 |
| 14***81 | Elbow Group | 1 |
| 17***73 | Bolt; (M20x1.5x55-mm) | 4 |
190-9961 Motor & Mtg Gp-Ventilation -Fumes
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 15***43 | Connector As. | 1 |
| 17***28 | Elbow As | 1 |
227-3031 Motor Gp-Gear -Hydraulic Generator
| 08***91 | Valve As-Check; (Hydraulic Fan Oil) | 1 |
| 12***47 | Kit-Seal; (Check Valve) | 1 |
| 13***35 | Seal-Shaft | 1 |
8i-0721 Motor Gp-Gerotor -Vibratory
| 06***39 | Seal-O-Ring | 1 |
| 16***21 | Kit-Bearing; (Vibratory Motor) | 1 |
| 4D***86 | Seal--Bushing To Selector Valve Group | 1 |
190-8789 Motor Gp-Piston -Auger
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
190-8787 Motor Gp-Piston -Drag Conveyor
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
190-6479 Motor Gp-Piston -Propel
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 07***53 | Pin; (Spring) | 2 |
| 11***34 | Bolt | 4 |
231-7244 Piston Gp-Actuator
| 23***44 | Piston Group-Actuator | 1 |
| 23***55 | Spring | 1 |
| 23***90 | Ring-Backup | 1 |
198-6178 Plug Gp-Hydraulic Lines
| 14***08 | Plug As. | 1 |
| 14***11 | Plug Group | 2 |
| 16***16 | Plug As | 1 |
190-9954 Pump & Mtg Gp-Auxiliary
| 14***45 | Connector As | 1 |
| 19***90 | Pump Group-Piston; -Auxiliary | 1 |
| 19***54 | Pump & Mtg Group-Auxiliary | 1 |
190-9956 Pump & Mtg Gp-Generator
| 10***93 | Flange-Adapter | 1 |
| 14***45 | Connector As | 1 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
190-9955 Pump & Mtg Gp-Hydraulic Fan
| 09***66 | Bolt; (M8x1.25x75-mm) | 1 |
| 14***55 | Elbow As. | 1 |
| 15***37 | Elbow Group | 1 |
190-6461 Pump & Mtg Gp-Propel
| 03***92 | Seal; (126.59mm Id) | 2 |
| 12***88 | Flange-Split | 6 |
| 13***96 | Elbow | 1 |
232-1533 Pump Gp-Gear -Charge, Conveyor
| 23***33 | Pump Group-Gear; -Charge, Conveyor | 1 |
| 23***03 | Kit-Seal; (Gear Pump)(Charge, Conveyor) | 1 |
218-4361 Pump Gp-Gear -Hydraulic Fan
| 06***09 | Nut-Elastic Stop; (9/16-18-Thd) | 1 |
| 19***51 | Seal-O-Ring | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
254-7016 Pump Gp-Gear -Hydraulic Fan
| 06***09 | Nut-Elastic Stop; (9/16-18-Thd) | 1 |
| 19***51 | Seal-O-Ring | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
199-5718 Pump Gp-Piston -Conveyor
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 07***53 | Pin; (Spring) | 2 |
| 11***23 | Spring | 2 |
190-8790 Pump Gp-Piston -Auxiliary
| 03***39 | Seal-O-Ring (Id=9.25mm) | 2 |
| 11***83 | Nut-Seal | 1 |
| 19***90 | Pump Group-Piston; -Auxiliary | 1 |
190-6480 Pump Gp-Piston -Propel
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 09***39 | Washer; (8.33x15x2.12-mm Thk) | 1 |
190-8791 Pump Gp-Piston -Generator
| 03***39 | Seal-O-Ring (Id=9.25mm) | 2 |
| 11***83 | Nut-Seal | 1 |
| 19***91 | Pump Group-Piston; -Generator | 1 |
231-7227 Rotating Gp-Pump
| 23***27 | Rotating Group-Pump | 1 |
| 23***49 | Spring | 1 |
| 23***50 | Cylinder Block | 1 |
193-0047 Tank & Mtg Gp-Hydraulic
| 09***87 | Tee | 1 |
| 10***93 | Flange-Adapter | 1 |
| 14***13 | Adapter Group | 1 |
192-4622 Tank Gp-Hydraulic
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***14 | Seal-O-Ring (Id=9.80mm) | 4 |
| 09***17 | Seal-O-Ring (Id=13.80mm) | 4 |
190-9963 Valve & Mtg Gp-Auxiliary
| 10***65 | Bolt-Socket Head; (M8x1.25x100-mm) | 4 |
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 12***88 | Tee | 1 |
198-6173 Valve & Mtg Gp-Control
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
| 15***37 | Elbow Group | 1 |
204-5351 Valve & Mtg Gp-Control -Gauge Isolator
| 11***70 | Bolt | 2 |
| 14***16 | Connector Group | 1 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
190-9965 Valve & Mtg Gp-Hydraulic Fan
| 14***51 | Elbow Group | 1 |
| 14***23 | Tee As | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
190-9964 Valve & Mtg Gp-Tow Point
| 14***18 | Connector As | 4 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 15***80 | Coil | 2 |
191-5240 Valve & Mtg Gp-Track Tensioner
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Clip | 2 |
| 12***63 | Spacer; (10.3x20x25-mm Thk) | 2 |
190-9967 Valve & Mtg Gp-Truck Hitch
| 14***61 | Elbow Group | 2 |
| 14***74 | Elbow As | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
247-1386 Valve & Mtg Gp-Truck Hitch
| 14***61 | Elbow Group | 2 |
| 14***74 | Elbow As | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
190-9962 Valve & Mtg Gp-Vibratory
| 16***74 | Tee Group | 2 |
| 19***03 | Valve Group-Control; -Vibratory Bypass | 1 |
| 19***62 | Valve & Mtg Group-Vibratory | 1 |
215-3511 Valve Gp-Accumulator Charging
| 21***11 | Valve Group-Accumulator Charging | 1 |
| 21***56 | Cartridge As-Valve | 1 |
| 21***57 | Kit-Seal | 1 |
230-9160 Valve Gp-Control -Truck Hitch
| 23***82 | Nut-Special | 1 |
| 23***60 | Valve Group-Control; -Truck Hitch | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
160-2451 Valve Gp-Control -Flow
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***16 | Solenoid As | 1 |
| 13***11 | Valve-Check | 1 |
190-8803 Valve Gp-Control -Vibratory Bypass
| 19***03 | Valve Group-Control; -Vibratory Bypass | 1 |
| 22***80 | Valve Group-Control; (Vibratory Bypass) | 1 |
| 22***83 | Coil | 1 |
208-1632 Valve Gp-Control -Vibratory
| 19***47 | Valve Group-Control; (Vibratory) | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
208-1631 Valve Gp-Control -Vibratory
| 19***47 | Valve Group-Control; (Vibratory) | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
138-4308 Valve Gp-Control
| 13***08 | Valve Group-Control | 1 |
| 15***09 | Orifice | 1 |
| 15***10 | Valve; (Sensing) | 1 |
190-8794 Valve Gp-Control -Truck Hitch
| 19***94 | Valve Group-Control; -Truck Hitch | 1 |
| 22***82 | Nut; (1/2-20-Thd) | 1 |
| 23***77 | Kit-Valve; (Auxiliary Control Valve) | 2 |
228-4076 Valve Gp-Control -Auxiliary
| 22***14 | Kit-Seal; (Solenoid Valve)(Auxiliary Control Valve) | 4 |
| 22***73 | Kit-Seal; (Flow Control Valve)(Auxiliary Control Valve) | 1 |
| 22***99 | Kit-Seal; (Solenoid Valve)(Auxiliary Control Valve) | 4 |
169-0166 Valve Gp-Counterbalance -Screed
| 07***27 | Kit-Seal; (Counterbalance Valve) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 12***16 | Solenoid As | 2 |
195-2880 Valve Gp-Counterbalance -Tow Point
| 03***53 | Seal-O-Ring; (08.92mm Id) | 2 |
| 11***16 | Kit-Seal; (Counterbalance Valve) | 1 |
| 19***77 | Valve Group-Counterbalance; (Tow Point) | 2 |
194-2566 Valve Gp-Counterbalance -Screed
| 14***16 | Connector Group | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
231-7233 Valve Gp-Pump Control -Pressure Compensator
| 23***33 | Valve Group-Pump Control; -Pressure Compensator | 1 |
| 23***42 | Kit-Seal; (Auxiliary Pump, Generator Pump) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
103-3602 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 1 |
| 11***21 | Coil | 2 |
8i-0142 Vibratory Gp
| 09***99 | Fitting-Grease; (Hydraulic) | 3 |
| 10***90 | Coupling | 4 |
| 10***95 | Bearing | 8 |
197-5294 Vibratory Gp
| 10***90 | Coupling | 4 |
| 10***95 | Bearing | 8 |
| 10***39 | Key-Square | 4 |
Implements
231-2204 Extension Ar -18-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 18***08 | Extension Group-Screed; -Diesel Heat, 24-In | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
231-2205 Extension Ar -20-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 18***08 | Extension Group-Screed; -Diesel Heat, 24-In | 2 |
| 18***19 | Extension Group-Screed; -Diesel Heat, 12-In | 2 |
106-3483 Extension Ar -Diesel Heat, 28-In
| 10***52 | Harness As-Screed; (Extension) | 1 |
| 10***83 | Extension Ar; -Diesel Heat, 28-In | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 8 |
231-2202 Extension Ar -20-Ft, 2-In
| 10***83 | Extension Ar; -Diesel Heat, 28-In | 2 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
106-3482 Extension Ar -Diesel Heat, 12-In
| 10***51 | Harness As-Screed; (Extension) | 1 |
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 5 |
231-2203 Extension Ar -16-Ft
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 2 |
| 11***09 | Bearing Group-Auger | 2 |
| 18***19 | Extension Group-Screed; -Diesel Heat, 12-In | 2 |
231-2201 Extension Ar -17-Ft, 6-In
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
235-1876 Extension Ar-Screed -14-Ft
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
| 21***53 | Extension Group-Main Frame | 1 |
8i-0520 Extension Gp-Screed -Diesel Heat, 12-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
185-5408 Extension Gp-Screed -Diesel Heat, 24-In
| 10***95 | Bearing | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
8i-0521 Extension Gp-Screed -Diesel Heat With Vibration, 28-In
| 10***95 | Bearing | 2 |
| 10***12 | Shaft As-Vibratory | 1 |
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
185-5419 Extension Gp-Screed -Diesel Heat, 12-In
| 18***19 | Extension Group-Screed; -Diesel Heat, 12-In | 1 |
| 1A***68 | Nut | 4 |
| 20***59 | Plate | 1 |
194-2481 Hitch Ar-Truck -Truck
| 19***67 | Valve & Mtg Group-Truck Hitch | 1 |
| 19***81 | Hitch Ar-Truck; -Truck | 1 |
| 19***82 | Hitch Group-Truck; -Oscillating | 1 |
195-3182 Hitch Gp-Truck
| 16***76 | Hitch Group-Truck; -Oscillating | 1 |
| 19***08 | Bar | 1 |
| 19***09 | Pin As | 1 |
166-7676 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
195-3181 Roller Ar-Push
| 11***96 | Roller Group-Push | 1 |
| 14***11 | Plug Group | 2 |
| 19***08 | Bar | 1 |
112-0896 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 10***64 | Shaft As | 2 |
| 11***95 | Roller As | 1 |
112-1276 Shaft Gp-Drive -Eccentric Weight
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 11***76 | Shaft Group-Drive; -Eccentric Weight | 1 |
| 24***28 | Seal | 1 |
Lubrication System
216-9683 Filter Gp-Engine Oil
| 21***83 | Filter Group-Engine Oil | 1 |
| 7W***27 | Filter As-Engine Oil | 2 |
234-6106 Pump Gp-Engine Oil
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 13***39 | Stud | 1 |
| 18***18 | Tube As | 1 |
Machine Arrangement
184-0917 Chassis Ar
| 18***17 | Chassis Ar | 1 |
| 18***72 | Frame As; -Paver | 1 |
| 19***38 | Hopper Group | 1 |
239-0682 General Ar -Bg-2255c
| 18***15 | Electrical Ar | 1 |
| 18***16 | Hydraulic Ar | 1 |
| 18***17 | Chassis Ar | 1 |
184-0914 General Ar -Ap-655c
| 18***14 | General Ar; -Ap-655c | 1 |
| 18***15 | Electrical Ar | 1 |
| 18***16 | Hydraulic Ar | 1 |
192-3780 Generator Ar-Hydraulic
| 19***56 | Pump & Mtg Group-Generator | 1 |
| 19***80 | Generator Ar-Hydraulic | 1 |
| 19***67 | Lines Group-Hydraulic Generator | 1 |
241-6806 Screed Ar
| 19***85 | Lines Group-Slope | 1 |
| 19***88 | Crown Group | 1 |
| 19***94 | Vibratory Group | 1 |
241-6776 Screed Ar
| 11***66 | Lines Group-Vibratory | 1 |
| 11***68 | Lines Group-Extension | 1 |
| 12***98 | Crown Group-Manual | 1 |
192-1909 Screed Ar
| 11***64 | Burner Group; -Diesel Heat | 1 |
| 11***66 | Lines Group-Vibratory | 1 |
| 11***68 | Lines Group-Extension | 1 |
206-6700 Screed Ar
| 19***85 | Lines Group-Slope | 1 |
| 19***88 | Crown Group | 1 |
| 19***94 | Vibratory Group | 1 |
Operator Station
194-3729 Console Gp-Instrument -Central
| 13***40 | Locknut; (M8x1.25-Thd) | 8 |
| 19***11 | Cover As-Console | 1 |
| 19***29 | Console Group-Instrument; -Central | 1 |
160-6567 Control Gp-Unprgmed Monitor -Caterpillar Monitoring System
| 16***67 | Control Group-Unprgmed Monitor; -Caterpillar Monitoring System | 1 |
| 25***03 | Control Group-Unprogrammed; (Caterpillar Monitoring System)(Caterpillar Monitoring System) | 1 |
204-6283 Floor Mat Gp
| 20***83 | Floor Mat Group | 1 |
| 20***00 | Floor Mat; (Operator Station Floor) | 1 |
| 20***01 | Floor Mat | 1 |
200-8020 Guard Gp-Vandalism
| 19***60 | Cover; (Center Console) | 1 |
| 20***20 | Guard Group-Vandalism | 1 |
| 20***50 | Cover; (Operator Console) | 2 |
132-3090 Lever Gp-Propel
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
101-9559 Lock Gp-Rotation
| 10***59 | Lock Group-Rotate | 1 |
| 10***60 | Plate | 1 |
| 13***64 | Bushing | 2 |
166-6943 Module Gp-Quad Gauge
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 16***43 | Module Group-Quad Gauge; -Fuel Level-Engine Coolant Temperature-Hydraulic Oil Temp-Engine Oil Pressure | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
194-1926 Module Gp-Speedometer & Tach
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 19***26 | Module Group-Speedometer & Tach | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
184-0921 Operator Ar
| 18***21 | Operator Ar | 1 |
| 19***29 | Console Group-Instrument; -Central | 1 |
| 19***30 | Platform Group-Operator; -Lh | 1 |
198-4295 Panel Gp-Instrument
| 08***12 | Lens-Clear; (Hazard Warning Lights) | 1 |
| 10***66 | Bezel | 3 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 3 |
196-6942 Panel Gp-Instrument -Operator
| 08***41 | Switch As-Toggle; (Lh Feeder Auto/Manual Control) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***86 | Switch Group-Toggle; (Parking Brake Override Control) | 1 |
205-5917 Platform Gp
| 11***14 | Platform As-Top | 1 |
| 12***51 | Support As-Platform; (Rh Outer) | 1 |
| 12***52 | Support As-Platform; (Lh Outer) | 1 |
206-6697 Platform Gp-Operator
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 2 |
| 19***01 | Bracket | 2 |
| 19***03 | Platform As; (Extender) | 2 |
194-3731 Platform Gp-Operator -Rh
| 10***59 | Lock Group-Rotate | 1 |
| 16***22 | Screw-Button Head; (M8x1.25x30-mm) | 2 |
| 19***45 | Cover As-Console; (Operator) | 1 |
247-2709 Platform Gp-Operator
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 2 |
| 19***01 | Bracket | 2 |
| 19***03 | Platform As; (Extender) | 2 |
194-3730 Platform Gp-Operator -Lh
| 10***59 | Lock Group-Rotate | 1 |
| 10***04 | Plate As | 2 |
| 16***22 | Screw-Button Head; (M8x1.25x30-mm) | 2 |
205-6296 Platform Gp-Operator
| 20***18 | Plate | 4 |
| 20***20 | . Yoke, Plate | 1 |
| 20***21 | Plate | 1 |
245-2885 Platform Gp-Operator
199-4298 Seat Gp-Suspension -Vinyl
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 2 |
197-7901 Seat Gp-Suspension -Vinyl, Rh
| 19***32 | Kit-Foam Back | 1 |
| 19***01 | Seat Group-Suspension; -Vinyl, Rh | 1 |
| 20***33 | Kit-Boot; (Suspension Seat) | 1 |
197-7902 Seat Gp-Suspension -Vinyl, Lh
| 19***32 | Kit-Foam Back | 1 |
| 19***02 | Seat Group-Suspension; -Vinyl, Lh | 1 |
| 20***33 | Kit-Boot; (Suspension Seat) | 1 |
235-3151 Seat Gp-Suspension -Vinyl
| 19***32 | Kit-Foam Back | 1 |
| 20***36 | Kit-Damper | 1 |
| 20***37 | Kit-Seat; (Indicators) | 1 |
198-9009 Steering Column Gp
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 08***11 | Ring | 2 |
| 10***12 | Bracket As-Motor | 1 |
187-6649 Umbrella Gp
| 18***49 | Umbrella Group; -Ap-650b | 1 |
106-8541 Umbrella Gp
| 10***41 | Umbrella Group; -Bg-225c | 1 |
Power Train
190-6473 Drive Gp-Final
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
| 17***11 | Bolt; (M20x1.5x70-mm)(M20x1.5) | 40 |
190-6469 Lines Gp-Propel
| 13***72 | Cover | 1 |
| 13***56 | Hose As | 1 |
| 14***38 | Elbow | 1 |
219-1962 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 13***67 | Piston-Brake | 1 |
| 15***84 | Cone | 2 |
Service Equipment And Supplies
7r-4741 Lines Gp-Spray Down
| 08***77 | Adapter | 1 |
| 1G***70 | Extension-Curve | 1 |
| 1G***79 | Hose As | 1 |
207-7497 Plate & Film Gp -German
| 15***11 | Film-Warning; (Hopper Support) | 2 |
| 15***35 | Film-Warning; (Mounting) | 2 |
| 20***97 | Plate & Film Group; -German | 1 |
239-4166 Plate & Film Gp -Bg-2255c
| 23***65 | Plate & Film Group; -Bg-2255c | 1 |
| 23***66 | Plate & Film Group; -Bg-2255c | 1 |
198-8281 Plate & Film Gp
| 19***80 | Plate & Film Group | 1 |
| 19***81 | Plate & Film Group | 1 |
198-8280 Plate & Film Gp
| 12***13 | Film-Instruction; (Hydraulic Oil Level) | 1 |
| 12***82 | Film-Information; (Height Scale)(Screed) | 2 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 2 |
207-7500 Plate & Film Gp
| 17***92 | Film-Warning; (Mounting) | 2 |
| 17***93 | Film-Warning; (Hopper Support) | 2 |
| 20***00 | Plate & Film Group | 1 |
254-0057 Plate & Film Gp
| 08***54 | Film-Notice; (Screed Retract) | 2 |
| 10***08 | Film; (Screed Adjustment)(Extender Screed) | 1 |
| 10***14 | Handle | 1 |
254-0055 Plate & Film Gp
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 2 |
| 15***79 | Film-Instruction; (Grease)(Instructions) | 2 |
| 16***89 | Tack-Fastener | 4 |
206-6694 Plate & Film Gp
| 08***51 | Film-Warning; (Lighting Screed Burner) | 2 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 2 |
| 15***79 | Film-Instruction; (Grease)(Instructions) | 2 |
239-4165 Plate & Film Gp -Bg-2255c
| 11***73 | Film-Stripe; (450-cm Each) | 0 |
| 11***75 | Film-Identification; (Barber-Greene)(Barber-Greene) | 4 |
| 12***13 | Film-Instruction; (Hydraulic Oil Level) | 1 |
228-4050 Plate & Film Gp
| 08***51 | Film-Warning; (Lighting Screed Burner) | 2 |
| 08***54 | Film-Notice; (Screed Retract) | 2 |
| 10***08 | Film; (Screed Adjustment)(Extender Screed) | 1 |
207-7498 Plate & Film Gp -French
| 15***15 | Film-Warning; (Hopper Support) | 2 |
| 15***34 | Film-Warning; (Mounting) | 2 |
| 20***98 | Plate & Film Group; -French | 1 |
207-7496 Plate & Film Gp -English
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
| 08***52 | Decal-Caution, Hopper Support | 2 |
| 20***96 | Plate & Film Group; -English | 1 |
207-7499 Plate & Film Gp -Spanish
| 17***80 | Film-Warning; (Mounting Machine) | 2 |
| 17***81 | Film-Warning; (Hopper Support) | 2 |
| 20***99 | Plate & Film Group; -Spanish | 1 |
201-7598 Pump & Motor Gp-Washdown -Fuel Transfer
| 08***68 | Spacer | 1 |
| 17***71 | Motor Group-Electric; -Fuel Transfer Pump | 1 |
| 19***02 | Pump Group-Fuel | 1 |
087-0889 Reel Gp-Washdown Hose
| 08***89 | Reel Group-Washdown Hose | 1 |
| 17***28 | Fitting-Swivel | 1 |
| 17***29 | Seal-V-Ring | 1 |
198-8278 Washdown Gp -With Reel
| 08***89 | Reel Group-Washdown Hose | 1 |
| 10***96 | Hose As | 1 |
| 12***78 | Valve As-Shutoff | 1 |
Slope And Grade Control
194-9421 Beam Gp-Transverse
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 19***77 | Frame As | 1 |
| 19***78 | Pad | 2 |
168-6500 Cable Gp-Control -Grade
| 10***63 | Clamp | 1 |
| 11***95 | Plug | 1 |
| 11***63 | Cable; (Coiled) | 1 |
209-3130 Control Gp-Grade & Slope
| 11***10 | Screw-Pan Head | 8 |
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
209-3126 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***97 | Plug | 1 |
239-2367 Control Gp-Grade & Slope
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
168-5031 Control Gp-Grade & Slope
| 14***22 | Cover | 1 |
| 14***25 | Seal-Bushing | 1 |
| 14***26 | Gasket | 1 |
197-7224 Control Gp-Grade & Slope -Premier Control System
| 12***36 | Bracket-Mounting | 2 |
| 13***85 | Mount As | 2 |
| 13***87 | Plate | 2 |
122-0094 Sensor Gp-Grade
| 11***29 | Cap-Dust | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
197-7848 Sensor Gp-Grade -Sonic
| 12***91 | Sensor Group-Sonic; -Grade | 1 |
| 19***48 | Sensor Group-Grade; -Sonic | 1 |
| 19***54 | Tube As | 1 |
209-3131 Sensor Gp-Grade -Sonic
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
122-0090 Sensor Gp-Grade -Averaging Ski
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 12***99 | Arm-Follower | 1 |
197-7847 Sensor Gp-Grade -Averaging Ski
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 19***47 | Sensor Group-Grade; -Averaging Ski | 1 |
| 19***54 | Tube As | 1 |
122-0095 Sensor Gp-Grade -Sonic
| 11***29 | Cap-Dust | 1 |
| 12***95 | Sensor Group-Grade; -Sonic | 1 |
| 14***16 | Faceplate | 1 |
209-3132 Sensor Gp-Grade -Averaging Ski
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
122-0091 Sensor Gp-Sonic -Grade
| 12***91 | Sensor Group-Sonic; -Grade | 1 |
| 12***95 | Sensor Group-Grade; -Sonic | 1 |
| 13***83 | Cable As | 1 |
Undercarriage
187-3073 Bogie Gp
| 14***93 | Bogie Group | 1 |
| 17***26 | Shaft | 2 |
| 18***73 | Bogie Group | 1 |
187-3170 Frame Gp-Track Roller -Lh Front
| 10***59 | Bearing-Sleeve | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 1 |
| 17***81 | Cover | 1 |
180-5708 Frame Gp-Track Roller -Rh Rear
| 14***76 | Bearing | 2 |
| 17***26 | Shaft | 1 |
| 17***89 | Plate As | 1 |
180-5709 Frame Gp-Track Roller -Rh Front
| 10***59 | Bearing-Sleeve | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 1 |
| 17***81 | Cover | 1 |
188-1613 Frame Gp-Track Roller -Lh
| 16***13 | Bolt-Hex; (M36 X 4 X 80) | 1 |
| 18***27 | Plate | 1 |
| 18***70 | Frame Group-Track Roller; -Lh Front | 1 |
187-3613 Frame Gp-Track Roller -Lh Rear
| 14***76 | Bearing | 2 |
| 17***26 | Shaft | 1 |
| 17***89 | Plate As | 1 |
188-1612 Frame Gp-Track Roller -Rh
| 16***13 | Bolt-Hex; (M36 X 4 X 80) | 1 |
| 18***27 | Plate | 1 |
| 18***08 | Frame Group-Track Roller; -Rear, Rh | 1 |
239-2366 Mounting Gp-Averaging Ski
| 23***66 | Mounting Group-Averaging Ski | 1 |
| 28***75 | Collar | 4 |
| 28***77 | Tube | 2 |
193-2438 Roller Gp-Track
| 05***03 | Washer; (40.46x69.85x7.37-mm Thk) | 1 |
| 10***79 | Cover As | 1 |
| 19***38 | Roller Group-Track | 1 |
188-0535 Tensioner Gp-Track -Idler Hub
| 03***53 | Ring-Retaining | 2 |
| 05***58 | Stud | 24 |
| 10***59 | Bearing-Sleeve | 2 |
184-0918 Undercarriage Ar
| 18***18 | Undercarriage Ar | 1 |
| 18***12 | Frame Group-Track Roller; -Rh | 1 |
| 18***13 | Frame Group-Track Roller; -Lh | 1 |
BG-2255C serial number reference
On the BG-2255C the PIN/serial plate is mounted on the machine frame, typically on the right side of the chassis near the engine compartment or operator's platform, the same general location Caterpillar uses on its other track pavers of this era. The plate shows the full Product Identification Number; the first 3 characters are the serial-number prefix identifying the model/parts-book series, and the digits following it are the sequential unit number within that prefix (e.g. CDG00001-UP).
| Prefix | Identifies | Notes |
|---|---|---|
| CDG | AP-655C / BG-2255C combined-model asphalt paver, base serial range | Runs the Caterpillar 3056 diesel. Chassis, brake hydraulics, and ventilation cover parts groups are cataloged jointly under the AP-655C.BG-2255C combined parts book, meaning this range shares its parts book and running gear with the AP-655C of the same era. Earlier serial range than CKR within this combined listing. |
| CKR | AP-655C / BG-2255C combined-model asphalt paver, later serial range | Same combined AP-655C.BG-2255C parts book as CDG, same Caterpillar 3056 engine fitment. Chassis, brake hydraulic lines, and ventilation cover parts groups list CDG and CKR together as the two serial ranges under this parts book, with CKR the later range. |
| ACM | BG-2255C track asphalt paver, standalone listing | Confirm with dealer. Seen only on a single equipment listing for a 1999-built unit (Extend-a-mat 10-20B heated screed, ultrasonic grade sensors, rubber tracks), not corroborated in a parts-book serial breakout. Not tied to the CDG/CKR combined AP-655C.BG-2255C parts manual, so it may represent a separately cataloged production block. |
Frequently asked questions
What engine does the Caterpillar BG-2255C use?
A Cat 3056 inline six-cylinder diesel (3056E on the electronically governed variant), 5.9 liters displacement, rated about 130 bkW (174 bhp) at 2200 rpm.
What is the operating weight of the BG-2255C?
Approximately 18,630 kg (41,070 lb) in typical paving configuration.
What replaced the Caterpillar BG-2255C?
No confirmed direct successor carries the BG-2255C name forward. Parts and service now route through the shared AP-655C parts and service lineage rather than a distinct next-generation model.
What BG-2255C owners discuss
What do owners say about the Cat 3056/3056E engine in the BG-2255C, and are there known quirks?
Operators running the 3056E-powered paver describe it as a straightforward, pre-emission-complexity diesel with no DPF or DEF system to manage, something owners of later Tier-emissions machines say they miss. The recurring complaint is coolant seepage around the water pump gasket and its adjoining hose clamps; left unaddressed this has led to overheating, blown head gaskets, and even warped cylinder heads. Common advice is to replace the water pump proactively at coolant-system service intervals (roughly every 6,000-8,000 hours) rather than waiting for a visible leak. Have your dealer verify cooling-system condition before it turns into overheating damage.
Are there known no-start or hard-start complaints tied to the 3056E's electronic controls?
Owners of 3056E-equipped machines report intermittent no-start or crank-but-no-start conditions more often traced to corroded engine-harness connectors, weak battery/ground connections, or a sticking fuel shutoff solenoid than to the ECM itself; a failing crank-position or timing sensor is mentioned less often as a cause. Community consensus is to work through basic electrical and solenoid checks first, since most reported no-start cases resolve there before an actual control-module fault is confirmed. Have your dealer run ECM and sensor diagnostics if basic checks don't resolve a no-start.
What's the typical undercarriage/track wear pattern on this rubber-tracked paver?
As with other rubber-track pavers, plain tread wear from ground contact isn't the main complaint operators raise — asphalt packed against the inner track surface is. If mix isn't cleaned off the inner wheel path regularly it works into the rubber, exposes the internal reinforcement, and shortens track life well before tread wear alone would call for replacement. Sharp debris caught between the load-bearing wheels and the inner track face is called out as another common cause of premature track damage, so operators recommend keeping that area scraped clean at shutdown.
Any recurring hydraulic issues specific to this machine?
Under this paver's shared Cat-branded parts identity, owners troubleshooting a stiff or non-functional tow point traced the problem to worn o-rings inside the pressure-reducing valves in that circuit; replacing the o-rings restored normal operation. Because this affects the tow/pull-point circuit used when moving the machine, have your dealer verify pressure-reducing valve and tow point function before towing or working around the machine.
What about the Extend-A-Mat 10-20B screed — any heater or plate issues owners flag?
The screed's diesel-fired plate heating runs burners on the main screed and each extension into a baffled combustion chamber that spreads heat evenly across the plates, and operators generally rate it as fast-heating and dependable as long as the burners and chambers stay clean of buildup. The complaint that comes up more often on this screed platform is extension plates drifting out of adjustment once mix loads the extensions, which throws off mat thickness side to side. Owners say to check plate alignment at every setup, not only after a repair.
What sensor or electrical quirks come up on this paver's automated grade/slope setup?
The ultrasonic sensors used for automatic screed control measure distance using sound, and their known limitation is that the speed of sound shifts with air temperature. On a paving pass with large radiant-heat swings or shifting wind, this can make the sensor reading drift and the mat wander until the sensor is shaded or re-referenced. Operators treat this as a characteristic of ultrasonic sensing in general, not a defect specific to this machine.
What should a buyer check before purchasing a used BG-2255C?
Measure the screed plates at all four corners, front and rear — new plates run about 12.7 mm (1/2 in) thick, and roughly 6.4 mm (1/4 in) remaining is considered usable life; uneven thickness side to side signals the screed has been running out of alignment. Grab each auger and check for play at the bearings and seals, since looseness means bearing replacement is coming. Inspect the inner track surface for embedded mix and reinforcement exposure rather than judging tracks on tread wear alone, and check conveyor, floor plates, and hopper flashing for wear. Run the machine through a full heat-up and paving cycle if at all possible, and ask for maintenance records tied to the actual serial prefix, since this platform's parts coverage is shared across two brand names and paperwork sometimes gets mixed up between them. Have your dealer verify hydraulic and engine condition on a full inspection before final purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific BG-2255C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.