Caterpillarasphalt paver
Caterpillar AP555E
Maintenance schedule, common problems & OEM parts breakdown
The Cat AP555E is a mid-size, Mobil-Trac rubber-belt tracked asphalt paver built around the Cat C4.4 ACERT diesel, a turbocharged four-cylinder rated about 106 kW (142-144 hp) under Tier 3/Stage IIIA emissions rules, with no DEF or SCR aftertreatment to maintain. Operating weight runs 16,005-17,710 kg (35,290-39,044 lb) depending on which screed is fitted. Caterpillar built this generation under serial prefix A5D, roughly 2012 through 2015. The AP555E shipped with a choice of AS2252C, AS3251C, AS4251C, or AS4252C vibratory screeds, covering commercial mainline work up through wider highway-class paving with hydraulic extensions. It sits in Caterpillar's mid-range paving lineup alongside the wheeled AP500E, positioned between smaller commercial pavers and the larger AP600/AP655-class track machines.
The E-series designation marked Caterpillar's Tier 3/Stage IIIA generation for this size class, giving the AP555E a simpler, DEF-free engine platform than what came after it. Caterpillar replaced the AP555E with the Tier 4 Final AP555/AP555F platform, which adds DEF and SCR aftertreatment along with a newer screed generation; parts, filters, and service procedures do not carry across that boundary. In the used and parts market, that split works in the AP555E's favor: no DEF system to fail, a well-proven C4.4 ACERT engine, and a maintenance-free Mobil-Trac undercarriage that eliminates final-drive fluid service entirely. A meaningful population of these machines is now well into the hours where auger, conveyor, and hydraulic components come up for rebuild, keeping demand steady for screed, undercarriage, and driveline parts. Buyers need the A5D serial prefix to confirm they are sourcing parts for this generation and not the later Tier 4 Final AP555F.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar AP555E specifications
Engine
| Engine model | Cat C4.4 with ACERT Technology, 4-cylinder turbocharged diesel with common-rail fuel delivery. Same engine used across the AP555E (E-series) production run, no mid-run engine change documented. |
| Gross power | 106 kW (142 hp imperial rating / 144 hp metric rating). Net power rating not published separately in factory literature. |
| Displacement | 4.4 L (269 in³) |
| Cylinders | 4 |
| Emissions tier | U.S. EPA Tier 3 / EU Stage IIIA. A later, unrelated AP555 (no E suffix) successor uses a higher-output C4.4 rated for Tier 4 Final/Stage V, not applicable to this AP555E. |
Weights
| Base tractor weight (no screed) | 12,590 kg (27,760 lb) without canopy; 12,945 kg (28,539 lb) with canopy |
| Operating weight, AS2252C screed | 16,005 kg (35,290 lb), no canopy |
| Operating weight, AS3251C screed | 16,240 kg (35,810 lb), no canopy |
| Operating weight, AS4251C tamper-bar screed | 17,710 kg (39,044 lb), with canopy |
| Operating weight, AS4252C tamper-bar screed | 16,745 kg (36,916 lb), with canopy |
| Ground pressure | Not published for this model. |
Dimensions
| Tractor length (with push roller) | 4.38 m (14'4") |
| Overall length (with push roller and screed) | Varies by screed: 5.46 m (17'11") AS2252C walkway up / 5.80 m (19') walkway down; 6.11 m (20') AS3251C; 5.75 m (18'10") AS4251C or AS4252C |
| Track gauge (outside to outside) | 2.22 m (8'3") |
| Transport width | 2.72 m (8'11") with screed end gates attached; 2.50 m (8'2") with end gates removed |
| Tractor operating width (hopper lowered) | 3.31 m (10'10") |
| Operating height | 3.84 m (12'7") |
| Transport height | 2.82 m (9'3"), fumes stack and seat lowered |
| Truck entry height (apron) | 576 mm (23 in) |
| Truck entry width | 3.20 m (10'6") |
| Hopper length | 1.96 m (6'5") |
| Deck height | 1.78 m (5'10") |
| Ground clearance | Not published for this model. |
Performance
| Travel speed (Mobil-Trac undercarriage) | 11 km/h (7 mph) maximum. AP555E is track-only; no wheeled variant (that configuration is the sibling AP500E). |
| Paving speed | 61 m/min (200 ft/min); 25 m/min (82 ft/min) with tamper-bar screed |
| Paving width range | 1.83-8.00 m (6'-26'4") overall span depending on screed and bolt-on extensions. AS2252C: 1.88-5.60 m (6'2"-18'5"). AS3251C: 1.83-6.15 m (6'-20'2"). AS4251C: 2.55-7.00 m (8'2"-23'). AS4252C: 2.55-8.00 m (8'2"-26'4"). |
| Max paving depth | 305 mm (12 in) |
| Max material throughput | 1,087 tonnes/h (1,198 tons/h) |
| Gradeability | Not published for this model. |
Service capacities (summary)
| Fuel tank | 189 L (50 gal) |
| Engine oil | Capacity not published; factory oil-change interval is 500 hours. |
| Hydraulic system | Not published for this model. |
| Cooling system | Not published for this model. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
AP555E fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with oil filter) - Cat C4.4 ACERT, Tier 3/Stage IIIA, non-DEF | Not publicly published for the AP555E's specific oil-pan configuration. Oil change interval is 500 hours. Confirm the exact fill volume against the machine's own OMM or with a Cat dealer before service. | Cat DEO or Cat DEO-ULS diesel engine oil (API CJ-4 / Cat ECF-3 performance level). A straight SAE 15W-40 covers most warm-ambient operation; a lighter SAE 10W-30 grade is used for cold-start service in colder climates. |
| Cooling system - Cat C4.4 high-ambient cooling package | Not publicly published. The AP555E uses a paver-specific, high-capacity front/top-mounted cooling arrangement that differs from a standard genset radiator, so capacity cannot be reliably carried over from other C4.4 applications. Verify against the OMM or with a Cat dealer. | Cat Extended Life Coolant (Cat ELC), a low-maintenance, pre-charged formula suited to extended service intervals. Do not mix with conventional SCA-based coolant. |
| Fuel tank | 189 L (50 US gal) | Ultra low sulfur diesel (ULSD) meeting Cat's fuel spec for Tier 3/Stage IIIA engines. Low-sulfur fuel and oil are called out to keep emissions within the engine's certified limits. |
| Hydraulic system and tank - propel, steering, mix-delivery (auger/conveyor), and screed circuits | Not publicly documented for the AP555E's Tier 3/Stage IIIA platform. Later DEF-equipped platforms use a different hydraulic-tank capacity that does not apply here. Verify against this machine's own OMM or with a Cat dealer. | Cat HYDO Advanced (or an equivalent Cat-approved multi-viscosity hydraulic oil). Grade is selected from the OMM's viscosity-by-ambient-temperature chart. |
| Propel drive - Mobil-Trac undercarriage belts (track option) or wheel bogie drive (wheel option) | No separate service-fill capacity documented. The Mobil-Trac belt undercarriage is described by Cat as maintenance-free; wheel bogie drives run off the machine's own hydraulic system with no separate gearbox fill identified in available documentation. | None separately specified - fluid is shared with the hydraulic system above. |
| Grease (chassis pivots, bearings, remote fittings) - spec only | Not applicable - grease-fitting service, no reservoir capacity. | Cat Multipurpose Grease (Cat MPGM) or an equivalent NLGI GC-LB lithium-complex grease. NLGI grade 2 for normal service; a softer NLGI grade 1 or 0 is used in cold ambient conditions for easier gun feed. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar AP555E maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
Servicing the AP555E beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S oil sampling on the C4.4 ACERT at every 500-hour oil change to catch turbocharger or injector wear before it causes a mid-season failure. Because the Mobil-Trac undercarriage carries no final-drive fluid, track health is a visual and tension call, not an oil-analysis one; inspect belt lugs and cords for cracking on the same schedule. Watch hydraulic oil condition closely too, since propel and screed-extension circuits share one tank, so contamination shows up across both systems at once.
Corrective & Common Repairs
Expect wear first at the material path: screed plates, auger flighting, and conveyor drive chain take the abrasive punishment and need scheduled replacement, not troubleshooting. Hydraulic hoses routed near the C4.4 engine and the heated screed crack from heat-cycling before they fail from pressure, so inspect routing at every screed service. Mobil-Trac belts wear at the edges and lugs rather than stretching like a chain, so tension checks alone will not catch tread wear. Screed heater wiring and connectors on electric-heat units are a frequent nuisance-fault source.
Overhaul & Rebuild Points
Major rebuild points on the AP555E center on the C4.4 ACERT turbocharger and injectors at high hours, plus the hydraulic propel pumps and motors that drive the Mobil-Trac belts. The auger and conveyor gearboxes wear internally long before seal leaks show externally, so track them by oil condition, not appearance. Whichever screed is fitted, from the AS2252C through the AS4252C, heater elements or LPG burner rails on heated variants are a common full-teardown item once heat-up time slows. Mobil-Trac belt replacement itself is the single largest undercarriage-rebuild cost.
Seasonal & Environment Servicing
Cold starts stress the C4.4 ACERT's fuel system and stiffen the Mobil-Trac rubber belts; run a winter fuel blend, warm the hydraulics before travel, and check track tension more often in freezing weather. Before the first cold-mix job of the season, verify the screed heater, electric elements or LPG burners depending on configuration, lights off and holds temperature. In hot, dusty paving conditions, clean the radiator and aftercooler cores more often than standard, and grease auger and screed pivots more frequently as asphalt dust cakes faster in summer heat.
AP555E common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 299-8229 | Filter-Fuel | Fuel system service | Check fitment → |
| 311-1110 | Filter As-Fuel | Fuel system service | Check fitment → |
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 343-7104 | Filter As-Fuel | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
AP555E fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-01 | Engine Oil Pressure - data valid but below normal operating range (low oil pressure) | Low oil level, worn oil pump, clogged filter, or a drifting oil pressure sensor under the sustained low-idle/high-load cycling typical of paving duty | Stop the engine at once if the warning is active, check oil level and filter condition, confirm sensor reading with diagnostic software before restarting |
| 100-03 / 100-04 | Engine Oil Pressure Sensor circuit fault - signal voltage above normal (open circuit) or below normal (short to ground) | Damaged sensor wiring, a corroded connector, or a failed oil pressure sensor | Inspect the sensor harness and connector for damage or corrosion, test the sensor per the service manual, replace if the circuit tests out of range |
| 110-00 | Engine Coolant Temperature - data valid but above normal operating range (overheating) | Low coolant level, a radiator or screen blocked with dust and asphalt fume residue, a failed fan drive, or a thermostat stuck closed | Shut down and let the engine cool, check coolant level and clean the radiator/screen, confirm fan operation before returning to service |
| 110-03 / 110-04 | Engine Coolant Temperature Sensor circuit fault - voltage above or below normal | Wiring or connector damage at the sensor, or a failed coolant temperature sensor | Check sensor wiring and connector condition, test sensor signal against spec, replace the sensor if out of range |
| 111-01 | Engine Coolant Level - data valid but below normal range (low coolant level) | Coolant loss from a hose, radiator, or water pump leak, or trapped air in the cooling system | Check coolant level at the top tank, inspect for external leaks, top off with the correct coolant and bleed the system as needed |
| 102-03 / 102-04 | Boost (intake manifold) Pressure Sensor circuit fault - voltage above or below normal | Damaged sensor wiring or connector, or a failed boost pressure sensor on the turbocharged C4.4 | Inspect wiring and connector for damage, verify the sensor signal with diagnostic software, replace the sensor if faulty |
| 94-03 / 94-04 | Fuel Delivery (rail) Pressure Sensor circuit fault - voltage above or below normal | Wiring or connector fault, or a failed fuel pressure sensor on the common-rail fuel system | Check the sensor harness and connector, verify fuel pressure sensor signal, replace the sensor if the circuit tests out of range |
| 168-01 | Electrical System (battery) Voltage - data valid but below normal range (low system voltage) | A weak or failing battery, loose or corroded battery cables, or a charging system fault | Check battery condition and terminal connections, test charging system output, repair or replace as needed |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
AP555E attachments & work tools
Screed family (main work tool)
AP555E pairs with the AS2252C, AS3251C, AS4251C, or AS4252C screeds, spanning vibratory-only and tamper-bar-plus-vibratory designs. Base paving range runs roughly 2.4-5.0 m (8'-16'4"); with the AS4252C and its extension package the tracked AP555E reaches up to about 8.0 m (26'4").
Screed extension / mounting system
AS2252C uses narrow front-mounted extenders with 229 mm (9") plates for commercial widths with less handwork; AS3251C uses hydraulically-driven rear-mounted extenders on heavy-duty support tubes for wider highway/street work. The screed itself connects to the tractor only through a pair of tow (leveling) arms, hydraulically actuated for float, crown, and angle.
Screed heating
AS-series screeds on the AP555E use electrically heated tamper bars and screed plates, with optional heated end gates to keep material flowing at the mat edges. This is resistive electric heat native to the E-series screed; the faster engine-generator quick-heat system was a later addition on the F-series successor, not the AP555E.
Compaction system (tamper/vibratory)
Initial compaction comes from variable-frequency tamper bars combined with vibratory screed plates on tamper-bar screeds, or from vibratory-only screed plates on the vibratory-only variant. Tamper frequency is adjustable from the screed control panel to match mix and lift thickness.
Grade and slope control
AP555E supports Cat Grade and Slope Control or a Topcon-compatible system, with elevation and cross-slope adjusted automatically from sensor input. Feeder/ski sensors can be run as mechanical contact sensors or sonic (non-contact) sensors, and averaging beams with multiple sensor pickups smooth out irregularities for a consistent grade.
Material feed system
Independent hydraulic controls run the augers and conveyors separately so material head can be tuned across the hopper width. Auger diameter is about 355 mm (14") and hopper length is about 1.9 m (6'4"); a fumes management system draws vapor from the auger chamber and conveyor tunnel and routes it out through the exhaust stack, away from screed and paver operators.
Undercarriage (track configuration)
AP555E rides on Cat's Mobil-Trac rubber-belted track undercarriage with large oscillating bogies and hydraulic accumulators, giving crawler-type flotation with wheel-paver ride quality. Two belt options are offered: a tread-bar belt for better traction on soft grade, or a smooth belt for less base disruption when turning and better contact when pushing trucks. This differs from the companion wheeled AP500E, which instead offers front-wheel-assist or all-wheel-drive options not applicable to the tracked AP555E.
Operator station configuration
Dual operating stations are fitted with the Advisor Monitoring System (AMS) and tilting consoles so either side can run the machine and screed controls. Configuration is otherwise driven by screed choice and grade-control selection rather than separate bolt-on work tools.
All AP555E assemblies by section
Every catalogued assembly group for the Caterpillar AP555E. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
328-5455 Air Cleaner Gp
| 12***09 | Valve-Ball; (Hydraulic Tank Drain) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***45 | Connector As | 2 |
270-8357 Air Cleaner Gp
| 27***57 | Air Cleaner Group | 1 |
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
207-8264 Bracket Gp-Mounting
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
| 20***64 | Bracket Group-Mounting | 1 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
323-5667 Exhaust Gp-Flexible
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***72 | Fitting-Fuel | 2 |
| 22***00 | Seal-O-Ring | 3 |
333-4788 Manifold Gp-Inlet
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 4 |
305-2168 Mounting Gp-Exhaust
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***72 | Fitting-Fuel | 1 |
| 22***00 | Seal-O-Ring | 3 |
333-4785 Turbocharger Gp
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 17***00 | Seal; (Fuel) | 2 |
| 21***39 | Filter Base Assembly; (24-Volt) | 1 |
Basic Engine
298-5090 Camshaft Gp
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 21***03 | Washer; (Sealing) | 1 |
298-5111 Cover Gp-Engine
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 13***08 | Cap As; (Engine Oil Filler) | 1 |
| 16***65 | Spring; (Crankcase Breather Hose) | 1 |
323-6222 Cover Gp-Valve Mechanism
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 0 |
298-5097 Cover Gp-Valve Mechanism
| 27***94 | Bolt | 3 |
| 29***97 | Cover Group-Valve Mechanism | 1 |
| 33***36 | Crankshaft Group | 1 |
330-1736 Crankshaft Gp
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 27***16 | Plug-Core | 4 |
364-2829 Crankshaft Gp
| 10***97 | Valve-Ball | 1 |
| 14***42 | Connector Group | 2 |
| 14***11 | Plug Group | 1 |
298-5086 Crankshaft Gp
| 03***63 | Plug | 1 |
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 06***02 | Dowel | 10 |
359-0716 Crankshaft Gp
| 22***01 | Bolt; (M15x1.5x137-mm) | 10 |
| 29***26 | Cylinder Head As | 1 |
| 31***20 | Gasket-Cylinder Head | 1 |
330-4789 Cylinder Block Gp
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 28***26 | Pulley | 1 |
| 28***27 | Belt-Serpentine | 1 |
298-5085 Cylinder Block Gp
| 11***59 | Bolt; (M10x1.5x35-mm) | 5 |
| 26***28 | Pulley As-Idler | 1 |
| 26***20 | Pulley | 1 |
298-4526 Cylinder Head As
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 10 |
| 10***31 | Flywheel As | 1 |
298-5088 Cylinder Head Gp
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
328-5480 Drain Gp-Engine Oil
| 10***57 | Plate | 1 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 14***76 | Housing-Flywheel | 1 |
344-4714 Drive Gp-Fan
| 13***07 | Bracket | 1 |
| 14***81 | Spacer | 1 |
| 18***43 | Stud | 4 |
323-9874 Drive Gp-Fan
| 29***24 | Bracket | 1 |
| 29***26 | Bracket | 1 |
| 32***74 | Drive Group-Fan | 1 |
306-2314 Flywheel Gp
| 12***28 | Spacer; (11x20x10-mm Thk) | 1 |
| 30***08 | Guard As-Belt | 1 |
| 30***25 | Mount As | 1 |
298-5110 Gear Gp-Front
| 17***71 | Bolt; (M8x1.25x20-mm) | 4 |
| 29***10 | Gear Group-Front | 1 |
299-5057 Housing Gp-Flywheel
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 4 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
299-5033 Lifting Gp-Engine
| 12***36 | Ring-Retaining | 2 |
| 22***38 | Bushing | 1 |
| 22***39 | Bolt-Special; (Connecting Rod) | 2 |
304-8763 Mounting Gp-Engine
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 30***63 | Mounting Group-Engine | 1 |
333-4789 Mounting Gp-Engine
| 22***22 | Plug-Cup | 1 |
| 33***89 | Mounting Group-Engine | 1 |
323-4650 Mounting Gp-Engine Flexible
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
| 32***50 | Mounting Group-Engine Flexible | 1 |
299-5082 Mounting Gp-Fan
| 10***41 | Bolt; (M12x1.75x25-mm) | 3 |
| 27***31 | Pulley | 1 |
| 29***82 | Mounting Group-Fan | 1 |
322-8424 Pan Gp-Oil
| 27***00 | Plug-Shaft End | 2 |
| 27***01 | Circlip | 1 |
| 27***06 | Spring-Shaft | 3 |
298-5087 Piston & Rod Gp
| 10***81 | Bracket | 1 |
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
| 14***88 | Elbow Group | 1 |
298-5129 Plug Gp-Cylinder Head
| 14***93 | Elbow Group | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 1 |
| 20***45 | Mount; (Dual Swivel) | 1 |
298-5098 Plug Gp-Engine
| 10***61 | Bolt; (M10x1.50x50-mm) | 5 |
| 22***29 | Pump As-Engine Oil | 1 |
| 29***98 | Plug Group-Engine | 1 |
298-5131 Plug Gp-Engine
| 10***87 | Bolt; (M10x1.5x85-mm) | 1 |
| 12***99 | Bolt; (M10x1.5x40-mm) | 1 |
| 28***44 | Gasket-Water Regulator; (Temperature) | 1 |
360-7346 Pulley Gp-Crankshaft
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 35***14 | Cooler-Oil | 1 |
| 35***15 | Gasket | 1 |
298-5101 Pulley Gp-Crankshaft
| 22***44 | Gasket; (Engine Oil Filter Base) | 2 |
| 23***51 | Plate; (Blanking) | 1 |
| 24***60 | Head As | 1 |
298-5089 Rocker Arm Gp
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 00***64 | End; (Hose) | 1 |
| 00***70 | Tee-Pipe | 1 |
298-4533 Rocker Arm Gp
| 11***29 | Bolt; (M8x1.25x75-mm) | 7 |
| 22***38 | Seal-O-Ring | 1 |
| 22***19 | Gasket | 1 |
Braking System
276-5455 Accumulator Gp-Brake -Charged
| 09***59 | Pin-Cotter | 4 |
| 09***19 | Ring-Retaining | 8 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
193-8539 Pump & Valve Gp-Brake -Manual Release
| 10***06 | Plate As | 3 |
| 15***86 | Plate As | 2 |
| 17***08 | Plate As | 2 |
229-9476 Pump Gp-Hand -Manual Brake Release
| 15***86 | Plate As | 1 |
| 17***08 | Plate As | 3 |
| 22***76 | Pump Group-Hand; -Manual Brake Release | 1 |
Controls
102-2703 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 1 |
| 27***83 | Film-Instruction; (Mat Thickness, Ccw To Increase) | 2 |
| 28***94 | Shaft As | 2 |
320-3019 Adjuster Gp-Height -Rh
| 10***01 | .. Roller, Bearing | 2 |
| 10***38 | Pointer | 1 |
| 10***39 | Key-Square | 1 |
320-3021 Adjuster Gp-Height -Lh
| 10***39 | Key-Square | 1 |
| 11***50 | Sprocket; (12-Teeth) | 1 |
| 18***45 | Boss; (12.7x25.4x15.7-mm Thk) | 2 |
350-6007 Adjuster Gp-Height
| 10***41 | Locknut-Bearing; (M30x1.5-Thd) | 4 |
| 17***35 | Ring-Retaining | 2 |
| 24***10 | Stopper-Rubber | 1 |
276-4579 Adjuster Gp-Height
| 27***79 | Adjuster Group-Height | 1 |
| 27***83 | Film-Instruction; (Mat Thickness, Ccw To Increase) | 2 |
| 28***24 | Shaft As | 2 |
253-4752 Adjuster Gp-Height
| 25***52 | Adjuster Group-Height | 1 |
| 27***84 | Film-Instruction; (Mat Thickness, Cw To Increase) | 2 |
| 28***26 | Shaft As | 2 |
350-6011 Adjuster Gp-Height
| 10***64 | Bearing-Thrust | 2 |
| 11***49 | Worm | 1 |
| 19***44 | Cap | 1 |
242-2785 Adjuster Gp-Manual -Gate
| 10***46 | Gear-Worm | 1 |
| 10***49 | Guide-Bushing | 1 |
| 10***64 | Bearing-Thrust | 2 |
350-6009 Adjuster Gp-Manual
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
250-3368 Adjuster Gp-Manual
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
197-9844 Chain Gp-Screed
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
165-4721 Control Gp-Thickness -Rh Thread
| 16***21 | Control Group-Thickness; -Rh Thread | 1 |
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
287-0326 Control Gp-Thickness -Lh Thread
| 08***34 | Screw-Button Head | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
253-4739 Control Gp-Thickness -Counterclockwise Rotation
| 06***93 | Lockwasher-Bearing | 2 |
| 10***99 | Jack Group-Sloper | 2 |
| 10***00 | . Axle, Rod End | 2 |
253-4738 Control Gp-Thickness -Lh Thread
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 25***38 | Control Group-Thickness; -Lh Thread | 1 |
165-4720 Control Gp-Thickness -Lh Thread
| 16***20 | Control Group-Thickness; -Lh Thread | 1 |
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
287-0327 Control Gp-Thickness -Rh Thread
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
| 27***74 | Box; (Lh) | 1 |
277-9934 Control Gp-Thickness -Lh Thread
| 27***34 | Control Group-Thickness; -Lh Thread | 1 |
277-9935 Control Gp-Thickness -Rh Thread
| 08***34 | Screw-Button Head | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
351-0186 Crown Gp-Power
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 1 |
276-4590 Crown Gp-Power
| 08***34 | Screw-Button Head | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 5 |
290-1628 Crown Gp-Power
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
| 27***74 | Box; (Lh) | 1 |
299-7235 Crown Gp-Power
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 1 |
196-2503 Jack Gp-Height Adjuster
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 21 |
102-2699 Jack Gp-Sloper
| 10***99 | Jack Group-Sloper | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
277-2005 Motor Gp-Power Adjuster
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 27***05 | Motor Group-Power Adjuster | 1 |
277-2006 Motor Gp-Power Adjuster
| 10***51 | Bolt; (M8x1.25x130-mm) | 1 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 1 |
| 14***83 | Bolt; (M10x1.5x45-mm)(Starter Motor) | 2 |
277-2004 Motor Gp-Power Adjuster
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 12 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 13***00 | Clip; (Tab) | 6 |
197-9850 Shaft Gp-Drive -Front-Non-Actuated
| 19***50 | Shaft Group-Drive; -Front-Non-Actuated | 1 |
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
197-9849 Shaft Gp-Drive -Rear-Actuated
| 10***03 | Plate-Cover | 8 |
| 10***04 | Plate As | 1 |
| 10***05 | Plate | 1 |
282-7961 Shaft Gp-Drive -Non-Actuated
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
| 27***74 | Box; (Lh) | 1 |
334-2654 Shaft Gp-Drive -Non-Actuated
| 29***80 | Terminal | 1 |
| 30***01 | Terminal | 10 |
| 30***91 | Terminal | 1 |
276-4573 Sloper Gp-Power
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
276-5635 Universal Joint Gp
| 27***35 | Universal Joint Group | 1 |
| 27***01 | Connection | 2 |
| 27***02 | Seal-O-Ring | 2 |
Cooling System
299-5078 Connection Gp-Water
| 29***78 | Connection Group-Water | 1 |
| 6I***63 | Nut; (M10x1.15-Thd) | 3 |
| 6I***12 | Stud | 3 |
353-7717 Cooler Gp-Engine Oil
| 26***48 | Pedal Group-Governor; -Electronic | 2 |
| 27***36 | Spacer | 2 |
| 35***17 | Cooler Group-Engine Oil | 1 |
333-4784 Cooler Gp-Engine Oil
| 03***47 | Ferrule | 3 |
| 03***91 | Nut | 2 |
| 03***14 | Nut; (7/16-In) | 1 |
298-5105 Pump Gp-Water
| 20***53 | Plate | 1 |
| 29***05 | Pump Group-Water | 1 |
| 6V***98 | Bolt; (M5x0.8x16-mm) | 5 |
323-6980 Radiator & Hyd Oil Cooler Gp
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 32***80 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
Electrical And Starting System
3e-6328 Alarm Gp
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 2 |
306-2320 Alternator Gp-Charging
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 30***20 | Manifold, Oil, Alternator Group-Charging; -24-Volt | 1 |
306-8856 Alternator Gp-Charging
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 2U***22 | Bulb (Indicator) 24v 21w Scc | 1 |
| 30***56 | Alternator Group-Charging | 1 |
327-5326 Battery & Wiring Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
| 19***15 | Tube-Flash; (8 Prong Connection)(Warning Beacon) | 1 |
352-0657 Box Gp-Control -Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
328-9946 Box Gp-Control
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 2 |
360-5623 Box Gp-Control
| 03***14 | Screw; (10-32x1-In) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
352-0658 Box Gp-Control -Lh
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 35***58 | Box Group-Control; -Lh | 1 |
| 5C***64 | Lamp Group-Signal; (Turn, Rh)(Turn Signal) | 1 |
360-5622 Box Gp-Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 10***58 | Flasher As; (24-Volt) | 1 |
288-1013 Box Gp-Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
352-0659 Box Gp-Control -Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
360-5620 Box Gp-Control
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
289-5816 Box Gp-Junction
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
353-0442 Box Gp-Relay
| 25***48 | Gearbox | 1 |
| 29***39 | Motor-Electric | 1 |
| 35***42 | Box Group-Relay | 1 |
304-6436 Control Gp-Engine Electronic
| 28***75 | Collar | 4 |
| 28***79 | Washer; (32.5x63.5x7.1-mm Thk) | 2 |
| 28***81 | Handle | 2 |
321-2415 Electrical Ar
| 32***15 | Electrical Ar | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 10***49 | Plate | 2 |
| 13***21 | Handle | 4 |
| 14***10 | Collar | 2 |
351-5775 Electronics Gp-Implement
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 35***75 | Electronics Group-Implement | 1 |
328-7027 Electronics Gp-Machine -Operator Control
| 12***50 | Receptacle As | 1 |
| 12***51 | Bushing | 1 |
| 12***52 | Clamp As-Cable | 1 |
328-7026 Electronics Gp-Machine
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 32***26 | Electronics Group-Machine | 1 |
351-8709 Electronics Gp-Machine
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 35***09 | Electronics Group-Machine | 1 |
328-7028 Electronics Gp-Monitor
| 11***24 | Clamp | 4 |
| 16***41 | Support-Sensor | 2 |
| 19***38 | Sensor Group-Sonic; (Position) | 4 |
321-2465 Generator & Mounting Gp -Belt Drive
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 32***65 | Generator & Mounting Group; -Belt Drive | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
299-5075 Glow Plug Gp
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***24 | Clamp | 2 |
| 16***41 | Support-Sensor | 2 |
286-3624 Heater Ar-Screed -Electric
| 11***24 | Clamp | 2 |
| 19***38 | Sensor Group-Sonic; (Position) | 2 |
| 1G***11 | Shaft-Governor Control | 2 |
324-6845 Installation Gp-Communication -Product Link
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
283-8145 Lamp Gp-Flood -Hid
| 1F***13 | Locknut; (3/4-In) | 2 |
| 23***80 | Fitting; (Pipe) | 1 |
| 28***45 | Lamp Group-Flood; -24-Volt, 35-Watt, Hid-Cab Guard | 1 |
234-4323 Lamp Gp-Flood
| 18***55 | Fitting-Pipe | 1 |
| 1F***13 | Locknut; (3/4-In) | 2 |
| 23***23 | Lamp Group-Flood; -Vertical Mount | 1 |
238-2797 Lamp Gp-Head & Signal -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
344-3455 Lamp Gp-Head & Signal -Rh
| 31***59 | Cover As | 1 |
| 34***55 | Lamp Group-Head & Signal; -Rh | 1 |
238-2798 Lamp Gp-Head & Signal -Lh
| 22***50 | Starting Motor Group-Electric | 1 |
| 23***98 | Lamp Group-Head & Signal; -Lh | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
344-3456 Lamp Gp-Head & Signal -Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 34***56 | Lamp Group-Head & Signal; -Lh | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
259-0134 Lamp Gp-Registration Plate
| 03***63 | Plug | 1 |
| 25***34 | Lamp Group-Registration Plate; -European Market | 1 |
291-3698 Lamp Gp-Signal -Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 29***98 | Lamp Group-Signal; -Rh | 1 |
338-1132 Lamp Gp-Warning Beacon -Amber, Strobe
| 10***05 | Plate | 4 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
284-3757 Lamp Gp-Warning Beacon -Amber, Strobe
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 21***39 | Strap-Cable | 3 |
| 23***39 | Clip | 1 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 3 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 13***00 | Clip; (Tab) | 2 |
235-3937 Lamp Gp-Warning Beacon -Amber, Rotating
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
288-6925 Lighting Gp-Flood
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***18 | Clip | 31 |
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
290-6022 Lighting Gp-Flood -Hid
| 10***05 | Plate | 10 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
354-1436 Lighting Gp-Roading
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
354-1435 Lighting Gp-Roading
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
321-2440 Lighting Gp-Roading
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
293-5354 Lighting Gp-Roading -Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
198-8284 Lighting Gp-Warning Beacon
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
276-1832 Lighting Gp-Warning Beacon
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
299-7245 Motor Gp-Electric
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
258-6918 Mounting Gp-Sensor -Sonic Sensor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 13***00 | Clip; (Tab) | 1 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 13***00 | Clip; (Tab) | 1 |
330-6085 Sensor & Mounting Gp -Contact
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 1 |
| 2L***69 | Terminal-Ring; (2-Ga To 10-Ga, 3/8-In Screw) | 1 |
| 33***85 | Sensor & Mounting Group; -Contact | 1 |
198-8279 Sensor Gp-Auger
| 19***79 | Sensor Group-Auger | 1 |
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 1 |
| 2L***69 | Terminal-Ring; (2-Ga To 10-Ga, 3/8-In Screw) | 1 |
195-8090 Sensor Gp-Position
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
278-3428 Sensor Gp-Position
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 24 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
266-1467 Sensor Gp-Position -Rotary
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 8 |
| 24***12 | Switch As-Toggle; (Right Extender Width Sw) | 3 |
301-0071 Sensor Gp-Position -2 Sensor
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***88 | Gasket-Connector | 1 |
| 15***98 | Screw-Button Head; (M3x0.5x1-mm) | 4 |
219-2385 Sensor Gp-Position
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
160-2443 Sensor Gp-Position
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
| 2L***69 | Terminal-Ring; (2-Ga To 10-Ga, 3/8-In Screw) | 1 |
| 33***25 | Wiring Group-Power Receptacle; -110-Vac | 1 |
284-8876 Sensor Gp-Position
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 3 |
294-0112 Sensor Gp-Position
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***88 | Gasket-Connector | 1 |
| 15***98 | Screw-Button Head; (M3x0.5x1-mm) | 4 |
334-7882 Sensor Gp-Temperature
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
322-9153 Sensor Gp-Temperature
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 3 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
145-7028 Sensor Gp-Temperature
| 06***44 | Grommet | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
322-9152 Sensor Gp-Temperature
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 3 |
| 12***66 | Socket-Connector; (14-Ga To 18-Ga) | 24 |
296-1288 Electronics Gp-Implement
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 11***07 | Knob | 2 |
| 12***44 | Paddle As | 2 |
362-3935 Starting Motor Gp-Electric
| 30***60 | Wiring Group-Screed; -Extension, Rh | 1 |
| 30***61 | Wiring Group-Screed; -Extension, Lh | 1 |
| 36***35 | Starting Motor Group-Electric | 1 |
299-5067 Starting Motor Gp-Electric
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
237-7602 Switch Gp-Disconnect -Battery
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 10 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
172-8660 Switch Gp-Liquid Level -Hydraulic Tank
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 2 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 1 |
333-4791 Switch Gp-Pressure
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 2 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
165-5970 Switch Gp-Toggle
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 4 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
1v-6652 Switch Gp-Toggle
| 1V***52 | Switch Group-Toggle | 1 |
| 31***52 | Wiring Group-Screed Heater; -250-mm Extension, Rh | 1 |
| 31***53 | Wiring Group-Screed Heater; -250-mm Extension, Lh | 1 |
299-7223 Wiring Gp-Crown
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 4 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
327-5330 Wiring Gp-Electronic Control
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
| 17***53 | Kit-Receptacle; (4-Pin) | 2 |
298-5130 Wiring Gp-Engine
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
| 17***53 | Kit-Receptacle; (4-Pin) | 2 |
| 17***56 | Kit-Connecting Plug; (4-Pin) | 2 |
304-9107 Wiring Gp-Heater -Rh
| 03***06 | Seal (Use As Required) | 1 |
| 16***80 | Plug As. | 1 |
| 20***72 | Plug As | 1 |
286-3633 Wiring Gp-Heater
| 24***59 | Adapter | 1 |
| 24***15 | Seal-O-Ring | 1 |
| 28***33 | Wiring Group-Heater | 1 |
276-4607 Wiring Gp-Heater
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 3 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
304-9102 Wiring Gp-Heater -Rh
| 12***28 | Spacer; (11x20x10-mm Thk) | 2 |
| 20***04 | Plate | 2 |
| 23***62 | Plate | 2 |
304-9108 Wiring Gp-Heater -Lh
| 14***68 | Elbow Group | 4 |
| 17***51 | Pin-Clevis | 2 |
| 19***59 | Cylinder Group-Hydraulic; -Auger, Rh | 1 |
293-6541 Wiring Gp-Heater
| 24***15 | Seal-O-Ring | 1 |
| 25***63 | Adapter | 1 |
| 29***41 | Wiring Group-Heater | 1 |
304-9103 Wiring Gp-Heater -Lh
| 14***11 | Plug Group | 1 |
| 29***10 | Plate-Cover | 1 |
| 30***03 | Wiring Group-Heater; -Lh | 1 |
327-5328 Wiring Gp-Machine -Rh
| 10***44 | Elbow | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 20***00 | Elbow As | 2 |
327-5327 Wiring Gp-Machine -Lh
| 14***68 | Elbow Group | 2 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 2 |
| 27***60 | Cylinder Group-Hydraulic; -Screed Hoist | 2 |
327-5329 Wiring Gp-Machine -Rear
| 14***74 | Elbow As | 2 |
| 16***88 | Elbow; (90-Deg) | 1 |
| 17***51 | Pin-Clevis | 4 |
333-8384 Wiring Gp-Panel -120-Vac
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 14***18 | Connector As | 2 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 2 |
333-8385 Wiring Gp-Panel -240-Vac
| 03***39 | Ring-Back-Up | 1 |
| 12***75 | Ring-Wear | 2 |
| 13***19 | Kit-Seal; (Extender Cylinder) | 1 |
321-2447 Wiring Gp-Power Receptacle -120-Vac
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 23***18 | Kit-Seal; (Auger Cylinder, Lh) | 1 |
| 23***19 | Wire-Lock | 1 |
336-0225 Wiring Gp-Power Receptacle -110-Vac
| 25***60 | Kit-Seal; (Hydraulic Cylinder) | 1 |
| 33***25 | Wiring Group-Power Receptacle; -110-Vac | 1 |
| 5W***19 | Fitting-Grease | 2 |
321-2449 Wiring Gp-Power Receptacle -Nacd
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 14***61 | Plug | 2 |
| 14***62 | Seal-Washer | 2 |
321-2446 Wiring Gp-Power Receptacle -220-Vac
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 23***20 | Kit-Plug; (Auger Cylinder) | 1 |
| 23***21 | Kit-Seal; (Auger Cylinder, Rh) | 1 |
327-5331 Wiring Gp-Power Train
| 27***79 | Kit-Seal; (Hydraulic Cylinder) | 1 |
| 2K***71 | Locknut; (1-14-Thd) | 1 |
| 32***31 | Wiring Group-Power Train | 1 |
306-6660 Wiring Gp-Screed -Extension, Rh
| 16***50 | Sleeve-Abrasion; (100-In Each) | 0 |
| 25***63 | Fitting & Mtg Group-Hydraulic; -Front, Lh Frame | 1 |
| 25***64 | Fitting & Mtg Group-Hydraulic; -Front, Rh Frame | 1 |
351-2797 Wiring Gp-Screed -Extension
| 28***51 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 32***50 | Pump & Mtg Group-Hydraulic Fan | 1 |
| 32***52 | Lines Group-Hydraulic Fan | 1 |
289-5815 Wiring Gp-Screed
| 28***15 | Wiring Group-Screed | 1 |
297-2488 Wiring Gp-Screed
| 14***75 | Elbow Group | 2 |
| 14***57 | Union Bulkhead; (Orfs) | 2 |
| 14***52 | Union As | 1 |
293-6625 Wiring Gp-Screed
| 14***75 | Elbow Group | 1 |
| 14***57 | Union Bulkhead; (Orfs) | 3 |
| 14***52 | Union As | 1 |
276-4606 Wiring Gp-Screed
| 26***92 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 27***06 | Wiring Group-Screed; -24-Volt | 1 |
| 29***49 | Cylinder Group-Hydraulic; -Hopper | 1 |
359-1035 Wiring Gp-Screed
| 32***14 | Lines Group-Tamper | 1 |
| 32***15 | Pump & Mtg Group-Auxiliary | 1 |
| 35***35 | Wiring Group-Screed | 1 |
304-9104 Wiring Gp-Screed
| 14***75 | Elbow Group | 2 |
| 14***57 | Union Bulkhead; (Orfs) | 2 |
| 14***52 | Union As | 1 |
276-4552 Wiring Gp-Screed -Extension
| 25***75 | Ring-Retaining | 1 |
| 27***52 | Wiring Group-Screed; -Screed Extension | 1 |
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 1 |
306-6661 Wiring Gp-Screed -Extension, Lh
| 30***61 | Wiring Group-Screed; -Extension, Lh | 1 |
| 32***98 | Hydraulic Ar-Auxiliary | 1 |
| 32***76 | Hydraulic Ar-Propel | 1 |
306-8868 Wiring Gp-Screed -250-Mm Extension
| 30***68 | Wiring Group-Screed; -250-mm Extension | 1 |
| 32***94 | Valve & Mtg Group-Truck Hitch | 1 |
| 32***95 | Lines Group-Truck Hitch | 1 |
293-5341 Wiring Gp-Screed -Rh
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 18***60 | Head | 1 |
351-0903 Wiring Gp-Screed
| 27***24 | Cylinder & Mtg Group-Screed Hoist | 1 |
| 27***26 | Cylinder & Mtg Group-Auger | 1 |
| 32***91 | Pump & Mtg Group-Auxiliary | 1 |
291-3697 Wiring Gp-Screed -Lh
| 14***53 | Hose; (272.2-cm) | 0 |
| 14***12 | Adapter As | 2 |
| 14***52 | Union As | 1 |
359-1042 Wiring Gp-Screed
| 32***89 | Valve & Mtg Group-Vibratory | 1 |
| 32***90 | Lines Group-Vibratory | 1 |
| 35***42 | Wiring Group-Screed | 1 |
319-7152 Wiring Gp-Screed Heater -250-Mm Extension, Rh
| 10***05 | Plate | 2 |
| 14***75 | Elbow Group | 1 |
| 14***55 | Union As | 2 |
306-8869 Wiring Gp-Screed Heater -250-Mm Extension
| 14***27 | Connector Group | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***39 | Connector As. | 1 |
351-0901 Wiring Gp-Screed Heater
| 31***03 | Hose As | 2 |
| 34***20 | Hose As | 2 |
| 35***01 | Wiring Group-Screed Heater | 1 |
293-7187 Wiring Gp-Screed Heater -750-Mm Extension, Lh
| 10***05 | Plate | 2 |
| 10***45 | Clamp | 4 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
319-7153 Wiring Gp-Screed Heater -250-Mm Extension, Lh
| 14***68 | Elbow Group | 1 |
| 14***84 | Elbow As | 4 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 3 |
321-2437 Wiring Gp-Screed Heater
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***36 | Elbow As. | 2 |
| 16***32 | Pin | 2 |
293-7258 Wiring Gp-Screed Heater -750-Mm Extension, Rh
| 10***03 | Plate-Cover | 1 |
| 10***05 | Plate | 4 |
| 14***77 | Elbow As. | 2 |
321-2444 Wiring Gp-Screed Heater
| 10***03 | Plate-Cover | 3 |
| 10***05 | Plate | 2 |
| 14***28 | Connector Assem. | 1 |
328-9591 Wiring Gp-Screed Heater -750-Mm Extension
| 10***05 | Plate | 1 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 2 |
| 14***27 | Connector Group | 1 |
Electrical System
294-8231 Box Gp-Screed Control -Rh
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***74 | Cover-Connector; (Wire Router) | 1 |
288-6125 Box Gp-Screed Control -Lh
| 28***25 | Box Group-Screed Control; -Lh | 1 |
| 31***96 | Software Group-Machine | 1 |
288-6124 Box Gp-Screed Control -Electronic
| 28***24 | Box Group-Screed Control; -Electronic | 1 |
| 34***21 | Software Group-Machine | 1 |
| 34***22 | Service Group-Machine | 1 |
288-6122 Box Gp-Screed Control -Rh
| 28***22 | Box Group-Screed Control; -Rh | 1 |
| 35***89 | Software Group-Implement | 1 |
| 35***90 | Service Group-Implement | 1 |
352-0667 Box Gp-Screed Control
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 2 |
286-5562 Box Gp-Screed Control -Rh
| 28***62 | Box Group-Screed Control; -Rh | 1 |
| 32***65 | Generator & Mounting Group; -Belt Drive | 1 |
| 32***24 | Console Group-Operator | 1 |
289-3576 Box Gp-Screed Control -Lh
| 28***76 | Box Group-Screed Control; -Basic, Left | 1 |
| 29***81 | Glow Plug; (24-Volt) | 4 |
| 29***72 | Bar | 1 |
294-8232 Box Gp-Screed Control -Lh
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 22***74 | Bezel; (Hid) | 1 |
| 27***82 | Lens As; (Hid) | 1 |
288-1014 Box Gp-Screed Control -Lh
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 28***14 | Box Group-Screed Control; -Lh | 1 |
289-3575 Box Gp-Screed Control -Rh
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 10***54 | Bolt; (M12x1.75x35-mm) | 3 |
| 12***96 | Seal; (1.084m) | 0 |
348-7769 Box Gp-Screed Control
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 2 |
Engine Arrangement
285-3201 Engine Ar-Primary
| 28***01 | Engine Ar-Primary | 2 |
| 32***50 | Mounting Group-Engine Flexible | 1 |
| 32***67 | Exhaust Group-Flexible | 1 |
321-2420 Installation Ar-Engine
| 1B***36 | Key-Woodruff | 1 |
| 27***26 | Rod-Push | 8 |
| 30***30 | Camshaft As | 1 |
Feeder Drag And Auger Conveyors
352-4611 Auger Gp
| 09***85 | Locknut; (M16x2-Thd) | 4 |
| 13***82 | Bolt; (M16x2x100-mm) | 4 |
| 15***49 | Screw-Flat Head; (M10x1.5x25-mm) | 8 |
106-9718 Bearing Gp-Auger
| 10***18 | Bearing Group-Auger | 1 |
| 19***12 | Plate | 2 |
| 1D***06 | Nut 13.89 mm (.546 In.) | 4 |
116-9509 Bearing Gp-Auger
| 11***09 | Bearing Group-Auger | 1 |
| 27***22 | Bushing | 2 |
| 32***50 | Plate Group-Slide | 1 |
201-5584 Bearing Gp-Auger
| 20***84 | Bearing Group-Auger | 1 |
| 27***22 | Bushing | 2 |
| 32***50 | Plate Group-Slide | 1 |
321-2419 Conveyor Ar-Drag & Auger
| 24***16 | Actuator Group | 4 |
| 25***29 | Support As; (Lh) | 1 |
| 25***36 | Support As; (Rh) | 4 |
352-4610 Conveyor Gp-Auger
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***47 | Washer | 2 |
| 24***16 | Actuator Group | 4 |
323-5568 Conveyor Gp-Drag
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 17***11 | Locknut; (M16x2-Thd) | 4 |
334-7637 Door Gp-Access
| 19***54 | Chain | 1 |
| 27***65 | Bar | 1 |
| 27***66 | Tube As | 1 |
322-9721 Door Gp-Access
| 08***07 | Pin | 2 |
| 09***79 | Setscrew-Socket | 4 |
| 09***76 | Nut; (M14x2-Thd) | 2 |
352-4622 Drive Gp-Conveyor
| 31***20 | Handrail As; (Rh) | 1 |
| 33***78 | Handrail As; (Lh) | 1 |
| 33***79 | Handrail As; (Rh) | 1 |
231-2043 Extension Gp-Auger -24-In, Lh
| 23***43 | Extension Group-Auger; -24-In, Lh | 1 |
| 24***87 | Connector | 16 |
| 26***34 | Hose As-Grease | 10 |
231-3532 Extension Gp-Auger -6-In
| 14***20 | Connector As | 2 |
| 14***85 | Elbow; (45°) | 8 |
| 14***89 | Elbow As | 6 |
243-0329 Extension Gp-Auger -18-In
| 24***29 | Extension Group-Auger; -18-In | 1 |
| 25***97 | Bar | 2 |
| 31***09 | Plate | 2 |
199-4206 Extension Gp-Auger -12-In, Lh
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 26***33 | Pin As | 1 |
231-2042 Extension Gp-Auger -24-In, Rh
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
| 16***85 | Pin As | 2 |
198-8287 Extension Gp-Auger -12-In, Rh
| 19***08 | Bar | 2 |
| 19***09 | Pin As | 1 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
215-1870 Footshaft Gp
| 21***70 | Footshaft Group | 1 |
| 31***62 | Plate | 2 |
| 7X***56 | Bolt-Plt; (M16 X 2.0 X 100) | 4 |
322-7244 Guard Gp-Conveyor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 22***38 | Sensor Group-Temperature; (Screed Heat) | 2 |
323-8177 Hydraulic Ar-Conveyor
| 26***54 | Shim; (2-mm Thk) | 4 |
| 29***23 | Nut-Adjustment; (1-1/4-12-Thd) | 44 |
| 29***24 | Stud; (1/2-13x4.52-In) | 44 |
323-8186 Motor & Mtg Gp-Conveyor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 22***38 | Sensor Group-Temperature; (Screed Heat) | 2 |
| 24***90 | Plate | 2 |
323-8185 Pump & Mtg Gp-Conveyor
| 18***31 | Bolt-Special; (1 1/4-12-2athd) | 4 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 21***69 | Stud | 4 |
263-6003 Shaft Gp-Feeder Drive
| 03***57 | Washer; (13x26x6-mm Thk) | 16 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
Frame And Body
300-9991 Arm Gp-Drop
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 2 |
286-3634 Arm Gp-Drop
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 1 |
276-4589 Arm Gp-Drop
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 1 |
| 26***33 | Pin As | 1 |
| 27***45 | Bar | 1 |
351-0178 Arm Gp-Drop
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 22***38 | Sensor Group-Temperature; (Screed Heat) | 4 |
321-2433 Arm Gp-Tow
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 13***89 | Clip; (Ladder) | 6 |
| 25***44 | Spacer; (14.86x19.05x12.5-mm Thk) | 4 |
356-4739 Ballast & Mounting Gp -4-Plate
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***37 | Bracket; (Rh) | 8 |
| 25***13 | Plate; (Lh Extender) | 1 |
356-5096 Ballast & Mounting Gp -4-Plate
| 09***22 | Ring-Retaining | 2 |
| 25***79 | Gate As | 1 |
| 31***18 | Guide As; (Rh) | 1 |
316-1659 Ballast & Mounting Gp -2-Plate
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***37 | Bracket; (Rh) | 8 |
| 25***06 | Plate; (Extender, Rh) | 1 |
316-1658 Ballast & Mounting Gp -2-Plate
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***37 | Bracket; (Rh) | 16 |
| 25***01 | Plate-Main | 1 |
356-5146 Ballast & Mounting Gp -6-Plate
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***75 | Bracket | 16 |
| 25***44 | Spacer; (14.86x19.05x12.5-mm Thk) | 8 |
356-5097 Ballast & Mounting Gp -6-Plate
| 09***22 | Ring-Retaining | 2 |
| 25***79 | Gate As | 1 |
| 31***19 | Guide As; (Lh) | 1 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 32***85 | Step As | 1 |
| 7F***88 | Pin | 2 |
315-1101 Brace Gp
| 26***61 | Lock Group-Transport | 1 |
| 31***01 | Brace Group | 1 |
| 32***33 | Arm Group-Tow | 1 |
350-6039 Brace Gp
| 23***07 | Bracket Group-Support | 2 |
| 35***64 | Brace Group | 1 |
| 35***39 | Brace Group | 1 |
350-5664 Brace Gp
| 10***89 | Brace Group | 1 |
| 23***07 | Bracket Group-Support | 1 |
| 35***64 | Brace Group | 1 |
232-1107 Bracket Gp-Support
| 23***07 | Bracket Group-Support | 1 |
| 32***32 | Insulation-Sound Suppression | 1 |
| 32***33 | Insulation-Sound Suppression | 1 |
263-6006 Bracket Gp-Support
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***04 | Housing As-Blower | 1 |
282-8500 Bracket Gp-Support
| 14***93 | Bogie Group | 1 |
| 17***26 | Shaft | 2 |
| 19***38 | Roller Group-Track | 4 |
295-3079 Carriage Gp-Extender
| 18***27 | Plate | 1 |
| 19***77 | Shim; (6.35-mm Thk) | 2 |
| 19***78 | Shim; (3-mm Thk) | 2 |
321-2430 Conversion Gp-Roading -Italy
| 18***27 | Plate | 1 |
| 19***77 | Shim; (6.35-mm Thk) | 2 |
| 19***78 | Shim; (3-mm Thk) | 2 |
321-2431 Conversion Gp-Roading -Germany
| 10***59 | Bearing-Sleeve | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 1 |
| 17***81 | Cover | 1 |
295-2114 Cover Gp-Access
| 10***59 | Bearing-Sleeve | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 1 |
| 17***81 | Cover | 1 |
272-2384 Cover Gp-Platform
| 05***03 | Washer; (40.46x69.85x7.37-mm Thk) | 1 |
| 10***79 | Cover As | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
350-5927 Cover Gp-Screed
| 35***27 | Cover Group-Screed | 1 |
| 35***26 | Track-Rubber | 2 |
358-6583 Cover Gp-Screed -Rh
| 29***43 | Frame Group-Track Roller; -Lh | 1 |
| 29***44 | Frame Group-Track Roller; -Rh | 1 |
| 29***45 | Drive Group-Final | 1 |
286-3493 Cover Gp-Screed
| 03***53 | Ring-Retaining | 2 |
| 10***59 | Bearing-Sleeve | 2 |
| 10***18 | Plate | 2 |
328-9585 Cover Gp-Screed
| 32***92 | Fuel Connector Adapter, Track-Rubber | 2 |
| 32***85 | Cover Group-Screed | 1 |
276-4582 Deflector Gp
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 27***35 | Clamp | 8 |
| 27***82 | Deflector Group | 1 |
350-5906 Deflector Gp
| 27***88 | Plate & Heater Group-Screed | 1 |
| 27***35 | Universal Joint Group | 2 |
| 29***01 | Conversion Ar-Screed; -Electric Heat | 1 |
250-3366 Deflector Gp
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***66 | Deflector Group | 1 |
| 27***35 | Clamp | 8 |
231-1983 Extension Gp-Main Frame -24-In
| 23***83 | Extension Group-Main Frame; -24-In | 1 |
| 27***88 | Plate & Heater Group-Screed | 1 |
| 29***36 | Extension Group-Main Frame | 1 |
299-7236 Extension Gp-Main Frame
| 27***35 | Universal Joint Group | 2 |
| 29***01 | Conversion Ar-Screed; -Electric Heat | 1 |
| 29***02 | Screed Ar | 1 |
349-1450 Extension Gp-Main Frame
| 29***20 | Extension Group-Screed | 1 |
| 29***33 | Extension Group-Screed; -6.5-M | 1 |
| 29***44 | Conversion Ar-Screed; -Electric Heat, 250-mm Extension | 1 |
231-1982 Extension Gp-Main Frame -12-In
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
| 21***53 | Extension Group-Main Frame | 1 |
339-1628 Extension Gp-Main Frame
| 29***20 | Extension Group-Screed | 1 |
| 29***44 | Conversion Ar-Screed; -Electric Heat, 250-mm Extension | 1 |
| 30***69 | Wiring Group-Screed Heater; -250-mm Extension, Cover | 1 |
215-7553 Extension Gp-Main Frame
| 21***53 | Extension Group-Main Frame | 1 |
| 34***65 | Valve & Mtg Group; -Main Frame Extension | 1 |
| 34***50 | Extension Group-Main Frame | 1 |
339-1636 Extension Gp-Main Frame
| 29***33 | Extension Group-Screed; -6.5-M | 1 |
| 32***85 | Cover Group-Screed | 1 |
| 32***92 | Conversion Ar-Screed; -Electric Heat, 750-mm Extension | 1 |
265-6509 Fitting Gp-Grease
| 24***03 | Extension Ar-Auger | 1 |
| 24***18 | Tube As; (1.8-M) | 1 |
| 26***09 | Fitting Group-Grease | 1 |
346-1707 Flashing Gp -Belting-Hydraulic Fold
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
346-1708 Flashing Gp -Plastic-Manual Fold
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
346-1709 Flashing Gp -Belting-Manual Fold
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
346-1706 Flashing Gp -Plastic-Hydraulic Fold
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
322-4975 Frame Gp-Main
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
350-7789 Frame Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 29***73 | Extension Group-Screed | 1 |
| 35***89 | Frame Group-Screed | 1 |
295-2113 Frame Gp-Screed
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
295-3080 Frame Gp-Screed
| 24***03 | Extension Ar-Auger | 1 |
| 24***18 | Tube As; (1.8-M) | 1 |
| 28***22 | Extension Ar-Screed; -Electric Heat, 5.5-M | 1 |
353-9489 Frame Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 29***74 | Extension Group-Screed | 1 |
| 35***89 | Frame Group-Screed | 1 |
286-3492 Frame Gp-Screed -Lh
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
286-3491 Frame Gp-Screed -Rh
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
286-3490 Frame Gp-Screed -Lh
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 21***53 | Extension Group-Main Frame | 1 |
276-4604 Frame Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
292-8813 Frame Gp-Sliding -Lh
| 09***22 | Ring-Retaining | 2 |
| 09***85 | Locknut; (M16x2-Thd) | 2 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 4 |
292-8814 Frame Gp-Sliding -Rh
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
253-4735 Gate Gp-End
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***31 | Bar-Spacer | 1 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
311-4470 Gate Gp-End
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
311-4480 Gate Gp-End -Folding
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
276-4603 Gate Gp-End
| 09***85 | Locknut; (M16x2-Thd) | 4 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 8 |
| 13***82 | Bolt; (M16x2x100-mm) | 4 |
350-9518 Gate Gp-End
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
273-9969 Guide Gp-Steering
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
327-5709 Handrail Gp
| 09***41 | Ring-Retaining | 1 |
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
| 24***06 | Shaft As | 1 |
301-1468 Hitch Gp-Oscillating
| 09***41 | Ring-Retaining | 1 |
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
| 24***07 | Shaft As | 1 |
345-8116 Hopper Gp
| 19***29 | Bolt-Shoulder; (M8x1.25-Thd) | 2 |
| 33***62 | Rod As | 2 |
| 33***63 | Plate | 2 |
325-9373 Hopper Gp -Hydraulic
| 08***36 | Clip-Internal; (Water Temperature Regulator) | 1 |
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
| 24***09 | Shaft As | 1 |
350-5975 Lines Gp-Grease
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 10***64 | Shaft As | 2 |
| 16***17 | Roller | 2 |
250-3370 Lines Gp-Grease
| 25***70 | Lines Group-Grease | 1 |
| 32***47 | Support As | 1 |
| 32***52 | Pad | 2 |
270-2104 Lines Gp-Grease
| 19***08 | Bar | 2 |
| 19***09 | Pin As | 1 |
| 27***04 | Lines Group-Grease | 1 |
263-5961 Lock Gp-Transport
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 24***28 | Seal | 1 |
| 24***41 | Kit-Bearing; (Drive Shaft) | 2 |
316-1660 Mounting Gp-Ballast
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
351-0075 Plate & Heater Gp-Screed -Electric Heat
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
| 24***88 | Seal; (100x112x12-mm) | 1 |
| 24***89 | Seal; (140x155x16-mm) | 1 |
295-3084 Plate & Heater Gp-Screed -Electric Heat
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
276-4605 Plate & Heater Gp-Screed -Electric Heat
| 09***76 | Nut; (M14x2-Thd) | 8 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 22 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
359-1034 Plate & Heater Gp-Screed
| 26***41 | Wall As | 1 |
| 33***85 | Tube As | 1 |
| 35***34 | Plate & Heater Group-Screed | 1 |
270-8888 Plate & Heater Gp-Screed
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
359-1041 Plate & Heater Gp-Screed -Electric Heat
| 26***44 | Wall As | 1 |
| 33***85 | Tube As | 1 |
| 35***41 | Plate & Heater Group-Screed; -Electric Heat | 1 |
328-9579 Plate & Heater Gp-Screed -750-Mm Extension
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
295-2111 Plate & Heater Gp-Screed
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 27***35 | Clamp | 22 |
| 28***11 | Blade; (Main, Lh) | 1 |
273-1160 Plate Gp
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 19***78 | Pad | 2 |
| 27***60 | Plate Group | 1 |
245-9077 Plate Gp-Screed -Electric Heat, 12-In
| 10***63 | Clamp | 1 |
| 11***98 | Plug | 1 |
| 11***08 | Bushing | 2 |
308-3132 Plate Gp-Screed -Electric Heat, Extender, Lh
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
245-9078 Plate Gp-Screed -Electric Heat, 28-In
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***08 | Bushing | 2 |
310-9817 Plate Gp-Screed -Lh
| 27***73 | Clip | 2 |
| 31***17 | Plate Group-Screed; -Lh | 1 |
| 31***97 | Sensor-Angle; (As200c)(Grade Control) | 1 |
311-6561 Plate Gp-Screed -Electric Heat, Main
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
310-9816 Plate Gp-Screed -Rh
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
287-0269 Plate Gp-Screed
| 11***10 | Screw-Pan Head | 8 |
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
295-2942 Plate Gp-Screed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
308-3130 Plate Gp-Screed -Electric Heat, Main
| 20***30 | Control Group-Grade & Slope | 1 |
| 23***08 | Link; (6-Pin) | 2 |
| 25***30 | Mount As | 2 |
308-3131 Plate Gp-Screed -Electric Heat, Extender, Rh
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***33 | Wire; (30-cm) | 0 |
302-3944 Step Gp
| 10***49 | Plate | 2 |
| 13***21 | Handle | 4 |
| 14***10 | Collar | 2 |
300-3564 Step Gp
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
321-2422 Structural Ar
| 09***49 | Bolt; (M8x1.25x40-mm) | 4 |
| 13***39 | Screw-Flat Head; (M8x1.25x30-mm) | 4 |
| 27***73 | Clip | 2 |
360-9843 Support Gp-Frame
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
231-1956 Support Gp-Frame
| 23***56 | Support Group-Frame | 1 |
| 25***29 | Mount As | 2 |
| 25***30 | Mount As | 2 |
360-9844 Support Gp-Frame
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
350-6038 Support Gp-Frame
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
322-9331 Suppression Gp-Sound
| 08***09 | Bracket | 7 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
321-2436 Ventilation Gp-Paver
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***04 | Tube; (1.1-M) | 1 |
329-8222 Walkway Gp
| 10***04 | Tube; (1.1-M) | 1 |
| 10***34 | Tube As | 1 |
| 10***49 | Collar | 2 |
Fuel System
276-0079 Control Gp-Decelerator
| 16***00 | Connector As | 1 |
| 27***79 | Control Group-Decelerator | 1 |
| 2S***40 | Clamp-Hose To Nipple | 1 |
201-7654 Cover Gp-Fuel Tank
| 10***47 | Gear-Worm | 1 |
| 10***50 | Guide-Bushing | 1 |
| 11***81 | Worm | 1 |
298-5123 Filter Gp-Primary Fuel
| 10***24 | Tube As; (Vertical) | 4 |
| 10***39 | Key-Square | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
174-9570 Filter Gp-Water Sep & Fuel
| 10***03 | Adjuster Group-Height; -Manual | 2 |
| 10***04 | Bolt-Shoulder | 2 |
| 10***24 | Tube As; (Vertical) | 4 |
320-0680 Injector Gp-Fuel
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 1 |
| 11***95 | Pin-Spring | 1 |
| 17***11 | Locknut; (M16x2-Thd) | 1 |
324-9680 Lines Gp-Fuel
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 1 |
| 17***11 | Locknut; (M16x2-Thd) | 1 |
| 21***21 | Locknut | 2 |
311-2271 Lines Gp-Fuel Filter
| 24***58 | Tube As | 1 |
| 24***73 | Tube As | 1 |
| 24***77 | Tube As | 1 |
333-4782 Pump Gp-Fuel Injection
| 13***21 | Rod-Threaded; (1-5-Acme Thd, Lh) | 2 |
| 13***24 | Sleeve As-Adjustment | 2 |
| 1J***36 | Pin-Spring; (Spring) | 2 |
352-6584 Pump Gp-Fuel Injection
| 13***22 | Rod-Threaded; (1-5-Acme Thd) | 2 |
| 13***25 | Sleeve As-Adjustment | 2 |
| 1J***36 | Pin-Spring; (Spring) | 2 |
324-0532 Pump Gp-Fuel Injection
| 24***58 | Plate-Gauge | 4 |
| 32***19 | Adjuster Group-Height; -Rh | 2 |
| 32***21 | Adjuster Group-Height; -Lh | 2 |
212-3657 Pump Gp-Fuel Prm & Water Sep -Electric
| 1J***36 | Pin-Spring; (Spring) | 2 |
| 21***57 | Pump Group-Fuel Prm & Water Sep; -Electric-Primary Filter | 1 |
| 25***56 | Sleeve As-Adjustment; (Lh Thread) | 2 |
358-6633 Rail Gp-Fuel
| 1J***36 | Pin-Spring; (Spring) | 2 |
| 25***63 | Rod-Threaded; (1-8-Acme Thd) | 2 |
| 25***64 | Sleeve As-Adjustment; (Rh Thread) | 2 |
324-9679 Tank Gp-Fuel
| 27***84 | Film-Instruction; (Mat Thickness, Cw To Increase) | 2 |
| 28***90 | Shaft As | 2 |
| 29***65 | Trunnion | 2 |
Grade References
109-5627 Leveler Gp -40-Ft Grade Reference
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
109-5623 Leveler Gp -30-Ft Grade Reference
| 10***23 | Leveler Group; -30-Ft Grade Reference | 1 |
109-5628 Leveler Gp -30-Ft Grade Reference
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
109-5625 Leveler Gp -30-Ft Grade Reference
109-5624 Leveler Gp -30-Ft Grade Reference
| 10***24 | Leveler Group; -30-Ft Grade Reference | 1 |
109-5626 Leveler Gp -Outboard
| 10***26 | Leveler Group; -Outboard | 1 |
109-5622 Leveler Gp -40-Ft Grade Reference
| 10***22 | Leveler Group; -40-Ft Grade Reference | 1 |
Hydraulic System
242-2749 Adapter Gp-Motor
| 10***36 | Clip | 2 |
| 10***03 | Plate-Cover | 5 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
258-7161 Adapter Gp-Motor
| 14***49 | Hose As | 1 |
| 14***76 | Elbow As | 2 |
| 14***93 | Elbow Group | 1 |
323-6351 Cover Gp
| 13***89 | Clip; (Ladder) | 1 |
| 17***35 | Ring-Retaining | 12 |
| 18***50 | Fitting As; (Quick) | 12 |
334-3260 Cover Gp
| 14***52 | Union As | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 2 |
| 24***53 | Nut-Special; (M6x1-Thd) | 2 |
270-7226 Cylinder & Mtg Gp-Auger
| 17***15 | Strap; (Dual Clamp) | 1 |
| 20***45 | Mount; (Dual Swivel) | 4 |
| 20***65 | Elbow As | 2 |
323-8196 Cylinder & Mtg Gp-Hopper
| 10***05 | Plate | 4 |
| 11***71 | Hose As | 1 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
270-7224 Cylinder & Mtg Gp-Screed Hoist
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***84 | Pin As | 4 |
| 14***74 | Elbow As | 10 |
333-0274 Cylinder & Mtg Gp-Tow Point
| 10***36 | Clip | 1 |
| 10***05 | Plate | 1 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 1 |
292-8449 Cylinder Gp-Hydraulic
| 14***24 | Connector Group | 1 |
| 14***27 | Connector Group | 1 |
| 14***29 | Connector As | 1 |
268-1692 Cylinder Gp-Hydraulic
| 10***03 | Plate-Cover | 1 |
| 10***05 | Plate | 3 |
| 10***22 | Support As; (Lh) | 1 |
251-0781 Cylinder Gp-Hydraulic
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 6 |
| 14***72 | Elbow Group | 4 |
275-0895 Cylinder Gp-Hydraulic
| 10***81 | Hose As | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***66 | Elbow Group | 1 |
194-7259 Cylinder Gp-Hydraulic
| 03***06 | Seal (Use As Required) | 1 |
| 12***95 | Elbow | 0 |
| 13***89 | Clip; (Ladder) | 1 |
270-3560 Cylinder Gp-Hydraulic
| 10***05 | Plate | 4 |
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***09 | Adapter As | 3 |
197-9766 Cylinder Gp-Hydraulic -Slope
| 10***03 | Plate-Cover | 5 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
| 15***90 | Bolt-Stacking; (M8x1.25x33-mm) | 4 |
194-7260 Cylinder Gp-Hydraulic -Auger, Lh
| 12***67 | Hose As | 1 |
| 14***68 | Elbow Group | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
270-2436 Cylinder Gp-Hydraulic -Screed Hoist
| 10***05 | Plate | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***45 | Connector As | 2 |
135-0218 Cylinder Gp-Hydraulic -Extender
| 10***05 | Plate | 4 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 1 |
| 14***45 | Connector As | 8 |
325-1854 Drive Gp-Pump
| 10***20 | Seal-O-Ring | 2 |
| 11***80 | Elbow | 1 |
| 14***27 | Connector Group | 4 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 14***28 | Connector Assem. | 2 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 2 |
258-7194 Fitting & Mtg Gp-Hydraulic -Rear, Lh Frame
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 14***28 | Tee As-Orfs | 1 |
| 15***11 | Elbow | 1 |
258-4663 Fitting & Mtg Gp-Hydraulic -Front, Lh Frame
| 17***39 | Bolt-Socket Head; (M8x1.25x30-mm) | 4 |
| 24***48 | Coupling As | 1 |
| 25***63 | Fitting & Mtg Group-Hydraulic; -Front, Lh Frame | 1 |
258-4664 Fitting & Mtg Gp-Hydraulic -Front, Rh Frame
| 17***39 | Bolt-Socket Head; (M8x1.25x30-mm) | 4 |
| 24***12 | Ring | 1 |
| 24***85 | Coupling | 1 |
258-7190 Fitting & Mtg Gp-Hydraulic -Rear, Rh Frame
| 09***32 | Ring-Retaining | 1 |
| 17***39 | Bolt-Socket Head; (M8x1.25x30-mm) | 4 |
| 24***49 | Adapter Group-Motor | 1 |
321-2416 Hydraulic Ar
| 26***11 | Kit-Seal; (Paver Ventilation Motor) | 1 |
| 32***16 | Hydraulic Ar | 1 |
286-3620 Hydraulic Ar
| 09***32 | Ring-Retaining | 1 |
| 17***39 | Bolt-Socket Head; (M8x1.25x30-mm) | 4 |
| 24***49 | Adapter Group-Motor | 1 |
340-5640 Hydraulic Ar
| 31***08 | Kit-Seal | 1 |
| 34***40 | Hydraulic Ar | 1 |
323-2198 Hydraulic Ar-Auxiliary
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
323-8179 Hydraulic Ar-Fan
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
321-2438 Hydraulic Ar-Tamper
| 07***53 | Pin; (Spring) | 2 |
| 13***95 | Orifice | 2 |
| 13***57 | Plug | 1 |
323-8178 Hydraulic Ar-Vibratory
| 10***20 | Seal-O-Ring | 1 |
| 14***45 | Connector As | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
324-3243 Lines Gp-Auger
| 14***25 | Connector As. | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 32***43 | Lines Group-Auger | 1 |
324-3245 Lines Gp-Brake & Shift
| 32***45 | Lines Group-Brake & Shift | 1 |
| 32***06 | Pump Group-Gear; (Hydraulic Fan) | 1 |
| 8T***56 | Bolt-Plt; (M12 X 1.75 X 35) | 2 |
286-3635 Lines Gp-Connecting
| 10***15 | Elbow Group | 1 |
| 12***88 | Flange-Split | 8 |
| 13***38 | Connector | 1 |
323-8188 Lines Gp-Conveyor
| 00***91 | Cup-Roller Bearing | 1 |
| 07***35 | Kit-Bearing; (Auxiliary Pump) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
286-3629 Lines Gp-Extender
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 12 |
| 26***60 | Dowel | 4 |
| 27***38 | Kit-Piston | 2 |
350-1624 Lines Gp-Extender
| 00***39 | Adapter-Pipe | 1 |
| 03***06 | Seal (Use As Required) | 1 |
| 13***00 | Clip; (Tab) | 2 |
350-5979 Lines Gp-Extender
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 3 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
295-3078 Lines Gp-Extender
| 08***56 | 90 Degrees Elbow | 1 |
| 12***57 | Clamp-Hose | 1 |
| 13***74 | Tube As-Drain | 1 |
276-4585 Lines Gp-Extension
| 13***89 | Clip; (Ladder) | 1 |
| 14***18 | Connector As | 2 |
| 14***19 | Connector As | 1 |
325-9375 Lines Gp-Hopper
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***78 | Union | 1 |
| 12***47 | Elbow | 1 |
324-3242 Lines Gp-Hopper
| 10***03 | Manifold; (Forward Return,Rear Return) | 2 |
| 14***81 | Elbow | 1 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 2 |
351-0904 Lines Gp-Hydraulic
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 25***67 | Valve Group-Bank 2; -Control | 1 |
324-3252 Lines Gp-Hydraulic Fan
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***16 | Connector Group | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
336-2034 Lines Gp-Pressure Test
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 7 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 4 |
324-3246 Lines Gp-Pump -Auxiliary
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 15***43 | Connector As. | 1 |
324-3247 Lines Gp-Return
| 08***56 | 90 Degrees Elbow | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***00 | Clip; (Tab) | 2 |
324-3241 Lines Gp-Screed
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***61 | Elbow Group | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
253-4756 Lines Gp-Slope
| 11***80 | Elbow | 1 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 2 |
| 15***59 | Tee Group | 1 |
324-3248 Lines Gp-Slope
| 21***56 | Cartridge As-Valve | 1 |
| 21***57 | Kit-Seal | 1 |
| 21***58 | Knob; (Hand) | 1 |
325-8414 Lines Gp-Tamper
| 23***82 | Nut-Special | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
| 25***59 | Kit-Seal | 1 |
286-3627 Lines Gp-Tamper
| 27***83 | Seal-O-Ring | 4 |
| 27***88 | Valve Group-Check; (Pilot Operated)(Screed Extension) | 2 |
| 28***27 | Lines Group-Tamper | 1 |
350-5989 Lines Gp-Tamper
| 22***84 | Coil As; (24-Volt) | 1 |
| 23***82 | Nut-Special | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
324-3244 Lines Gp-Track Tension
| 26***51 | Kit-Solenoid Valve; (Auger Raise, Lower) | 2 |
| 26***26 | Kit-Check Valve; (Apron Fold) | 2 |
| 32***44 | Lines Group-Track Tension | 1 |
328-2195 Lines Gp-Truck Hitch
| 26***51 | Kit-Solenoid Valve; (Auger Raise, Lower) | 2 |
| 30***43 | Cap, Main Bearing, Main Bearing Cap, Kit-Valve; (Control) | 2 |
| 30***61 | Kit-Valve; (Pressure) | 1 |
350-9317 Lines Gp-Vibratory
| 09***01 | Bolt-Socket Head; (M8x1.25x40-mm) | 6 |
| 1T***43 | Ball Bearing | 2 |
| 24***43 | Plug | 1 |
323-8190 Lines Gp-Vibratory
| 1T***43 | Ball Bearing | 2 |
| 24***43 | Plug | 1 |
| 24***63 | Shaft As-Drive | 1 |
276-4584 Lines Gp-Vibratory
| 21***14 | Seal-O-Ring | 1 |
| 21***74 | Seal & Retainer As | 2 |
| 21***75 | Seal-O-Ring | 1 |
295-3083 Lines Gp-Vibratory
| 29***83 | Lines Group-Vibratory | 1 |
286-3628 Lines Gp-Vibratory
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 28***28 | Lines Group-Vibratory | 1 |
| 31***18 | Valve-Servo | 2 |
354-1626 Lines Gp-Vibratory
| 1T***43 | Ball Bearing | 2 |
| 24***43 | Plug | 1 |
| 24***80 | Shaft As-Drive | 1 |
265-7799 Lines Gp-Vibratory
| 26***99 | Lines Group-Vibratory | 1 |
| 33***56 | Kit-Seal | 1 |
| 35***86 | Valve Group-Solenoid; (Ventilation) | 1 |
359-0123 Lines Gp-Vibratory
| 1T***43 | Ball Bearing | 2 |
| 24***43 | Plug | 1 |
| 24***80 | Shaft As-Drive | 1 |
286-3630 Manifold Gp-Control -Screed
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 24***05 | Shaft Group-Vibratory | 1 |
| 26***49 | Housing Group-Eccentric Weight; -Main, Lh | 1 |
323-8187 Motor & Mtg Gp-Auger
| 26***49 | Housing Group-Eccentric Weight; -Main, Lh | 2 |
| 32***87 | Motor & Mtg Group-Auger | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 8 |
283-0351 Motor & Mtg Gp-Hydraulic Fan
| 09***99 | Fitting-Grease; (Hydraulic) | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***33 | Key-Square; (1/4in X 3/4in Lg) | 4 |
323-8183 Motor & Mtg Gp-Propel
| 00***39 | Adapter-Pipe | 4 |
| 10***95 | Bearing | 4 |
| 10***39 | Key-Square | 4 |
258-7162 Motor & Mtg Gp-Tamper -Main, Rh
| 03***69 | Tube | 4 |
| 17***55 | Pin | 2 |
| 24***14 | Rod | 2 |
258-7186 Motor & Mtg Gp-Tamper
| 09***03 | Key; (Square) | 2 |
| 14***91 | Steering Wheel As | 2 |
| 15***68 | Plug | 2 |
258-7185 Motor & Mtg Gp-Tamper -Main, Lh
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***87 | Start Switch Assembly; (Key)(Engine) | 1 |
| 12***74 | Cover-Connector; (Wire Router) | 4 |
332-6606 Motor & Mtg Gp-Ventilation
| 08***11 | Ring | 2 |
| 09***33 | Key-Square | 1 |
| 16***32 | Block As-Mounting | 1 |
263-5148 Motor & Mtg Gp-Vibratory -Screed
| 08***11 | Ring | 2 |
| 09***33 | Key-Square | 1 |
| 19***90 | Sensor Group-Position; -Steering | 1 |
308-2125 Motor Gp-Gear
| 27***48 | Control Group-Unprgmed Monitor; -Advisor | 1 |
| 30***25 | Motor Group-Gear; -Vibratory | 1 |
266-9833 Motor Gp-Gear -Paver Ventilation
| 23***00 | Cover-Switch | 1 |
| 23***01 | Cover-Switch | 1 |
| 23***03 | Cover-Switch | 2 |
190-8789 Motor Gp-Piston -Auger
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 14***44 | Plug As-Connector; (70-Pin) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
269-0530 Motor Gp-Piston -Propel
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 10 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
230-9384 Motor Gp-Piston -Conveyor
| 15***62 | Knob | 2 |
| 23***84 | Motor Group-Piston; -Conveyor | 1 |
| 2M***19 | Ring-Retaining | 2 |
325-8415 Pump & Mtg Gp-Auxiliary
| 10***14 | Knob | 2 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 2 |
| 15***93 | Screw-Button Head; (M4x0.7x12-mm) | 2 |
323-8191 Pump & Mtg Gp-Auxiliary
| 23***39 | Floor Mat | 2 |
| 27***57 | Floor Mat | 1 |
| 27***26 | Floor Mat | 1 |
324-3250 Pump & Mtg Gp-Hydraulic Fan
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 32***35 | Guard Group-Vandalism | 2 |
| 32***50 | Pump & Mtg Group-Hydraulic Fan | 1 |
323-8182 Pump & Mtg Gp-Propel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
339-3533 Pump Gp-Piston -Propel
| 08***97 | Washer; (13x50x6-mm Thk) | 3 |
| 10***38 | Collar | 1 |
| 14***74 | Extension As-Platform | 2 |
230-9385 Pump Gp-Piston -Auxiliary
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
269-0533 Pump Gp-Piston
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
348-8146 Pump Gp-Piston -Tamper
| 28***93 | Cover Group-Screed | 1 |
| 31***00 | Platform Group-Operator; -Slide | 1 |
| 34***46 | Pump Group-Piston; -Tamper | 1 |
355-9786 Rotating Gp-Pump -Tamper
| 11***33 | Washer; (11x50x6-mm Thk) | 2 |
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 2 |
| 19***01 | Bracket | 2 |
323-8180 Tank & Mtg Gp-Hydraulic
| 17***11 | Locknut; (M16x2-Thd) | 4 |
| 24***09 | Damper | 8 |
| 25***38 | Pad | 4 |
324-3253 Tank Gp-Hydraulic
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 13***00 | Clip; (Tab) | 4 |
| 13***64 | Bushing | 2 |
325-9374 Valve & Mtg Gp -Apron Fold
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 13***64 | Bushing | 2 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
343-7765 Valve & Mtg Gp -Main Frame Extension
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 2 |
| 23***51 | Seat Group-Suspension; -Vinyl | 2 |
323-8193 Valve & Mtg Gp-Auxiliary -Cooler
| 19***32 | Kit-Foam Back | 1 |
| 20***36 | Kit-Damper | 1 |
| 20***37 | Kit-Seat; (Indicators) | 1 |
325-8413 Valve & Mtg Gp-Auxiliary
| 32***13 | Valve & Mtg Group-Auxiliary | 1 |
256-2539 Valve & Mtg Gp-Control -Screed Extension
| 25***39 | Valve & Mtg Group-Control; -Screed Extension | 1 |
323-8192 Valve & Mtg Gp-Control -Brake Release
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 2 |
| 14***67 | Elbow Group; (Each Includes) | 2 |
| 32***92 | Valve & Mtg Group-Control; -Brake Release | 1 |
323-8195 Valve & Mtg Gp-Counterbalance -Hopper Hoist, Tow Point
| 27***40 | Kit-Seal; (Pump Drive) | 1 |
| 27***41 | Kit-Bearing | 1 |
| 32***90 | Gauge-Sight; (Oil Level) | 1 |
332-6607 Valve & Mtg Gp-Flow Control -Ventilation
| 14***75 | Elbow Group | 1 |
| 15***26 | Union Assembly | 2 |
| 17***15 | Strap; (Dual Clamp) | 2 |
323-8194 Valve & Mtg Gp-Track Tensioner
| 11***87 | Screw | 1 |
| 11***88 | Seal; (O-Ring) | 1 |
| 11***89 | Cap | 1 |
328-2194 Valve & Mtg Gp-Truck Hitch
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
| 22***76 | Pump Group-Hand; -Manual Brake Release | 1 |
323-8189 Valve & Mtg Gp-Vibratory
| 23***43 | Knob | 1 |
| 31***34 | Kit-Seal; (Check Valve) | 1 |
| 32***89 | Valve & Mtg Group-Vibratory | 1 |
215-3511 Valve Gp-Accumulator Charging
| 09***69 | Bolt | 4 |
| 10***55 | Plate | 1 |
| 17***24 | Bar | 2 |
252-9467 Valve Gp-Bank 2 -Control
| 01***41 | Setscrew-Socket | 3 |
| 25***67 | Valve Group-Bank 2; -Control | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
270-3549 Valve Gp-Control
| 21***70 | Footshaft Group | 2 |
| 27***49 | Valve Group-Control; -2-Bank | 1 |
| 32***44 | Guard Group-Conveyor | 1 |
230-9160 Valve Gp-Control -Truck Hitch
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***47 | Tube As | 1 |
269-0535 Valve Gp-Control
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
| 21***04 | Bolt-Socket Head; (7/16-20x4.5-In) | 2 |
292-9094 Valve Gp-Counterbalance -Hopper Hoist, Tow Point
| 10***85 | Plate | 2 |
| 10***91 | Pipe | 2 |
| 10***96 | Plate | 1 |
332-6609 Valve Gp-Flow Control -Ventilation
| 05***20 | Pin-Spring | 100 |
| 12***46 | Bar-Feeder | 50 |
| 33***09 | Valve Group-Flow Control; -Ventilation | 1 |
276-6041 Valve Gp-Pump Control
| 10***56 | Rod; (Prop) | 4 |
| 11***77 | Bumper-Rubber | 4 |
| 12***27 | Spacer; (9x14x3.5-mm Thk) | 1 |
356-6895 Valve Gp-Pump Control -Pressure, Flow Compensator-Tamper
| 33***39 | Panel As | 1 |
| 33***40 | Louver As | 1 |
| 35***95 | Valve Group-Pump Control; -Pressure, Flow Compensator-Tamper | 1 |
332-1453 Valve Gp-Solenoid
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 4 |
294-0802 Valve Gp-Solenoid
| 29***02 | Valve Group-Solenoid | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
310-8017 Valve Gp-Solenoid
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 2 |
276-6042 Valve Gp-Solenoid
| 10***99 | Sprocket As; (12-Teeth) | 2 |
| 13***92 | Key-Square | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
346-9504 Valve Gp-Solenoid
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 4 |
357-8869 Valve Gp-Solenoid
| 31***84 | Tube | 2 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 2 |
| 34***66 | Segment-Quarter Auger; (Lh Inner/Rh Outer) | 2 |
242-2751 Vibratory Gp -Front, Rh
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
276-4572 Vibratory Gp
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 4 |
| 10***30 | Bearing-Flange | 2 |
| 10***70 | Key-Square | 2 |
265-0684 Vibratory Gp
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***25 | Connector As. | 11 |
| 14***27 | Connector Group | 2 |
242-2750 Vibratory Gp -Front, Lh
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 23***32 | Extension Group-Auger; -6-In | 1 |
350-5959 Vibratory Gp
| 22***36 | Bolt; (M24x2x85-mm) | 2 |
| 25***53 | Washer; (25x55x8-mm Thk) | 2 |
| 27***48 | Pin | 2 |
242-2753 Vibratory Gp -Rear, Rh
| 24***53 | Vibratory Group; -Rear, Rh | 1 |
| 32***85 | Pump & Mtg Group-Conveyor | 1 |
| 32***86 | Motor & Mtg Group-Conveyor | 1 |
295-3082 Vibratory Gp
| 10***68 | Nipple-Pipe | 2 |
| 11***99 | Pin As-Pivot | 2 |
| 13***77 | Lockout | 4 |
242-2752 Vibratory Gp -Rear, Lh
| 12***54 | Screw-Flat Head; (M12x1.75x35-mm) | 48 |
| 19***40 | Plate | 2 |
| 21***33 | Plate | 2 |
263-2536 Vibratory Gp -Hydraulic
| 10***20 | Seal-O-Ring | 2 |
| 11***80 | Elbow | 1 |
| 14***27 | Connector Group | 3 |
Implements
339-1646 Blade & Heater Gp-Tamper
| 15***02 | Spacer; (11x20x15-mm Thk) | 2 |
| 19***88 | Clip | 2 |
| 1G***70 | Extension-Curve | 1 |
328-9581 Blade & Heater Gp-Tamper -750-Mm Extension
| 15***02 | Spacer; (11x20x15-mm Thk) | 2 |
| 16***00 | Connector As | 1 |
| 19***88 | Clip | 2 |
287-2280 Blade & Heater Gp-Tamper
| 11***73 | Film-Stripe; (450-cm Each) | 0 |
| 11***75 | Film-Identification; (Barber-Greene)(Barber-Greene) | 3 |
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
339-1673 Blade & Heater Gp-Tamper
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 10***90 | Hose As | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
295-2112 Blade & Heater Gp-Tamper
| 29***12 | Blade & Heater Group-Tamper | 1 |
| 31***68 | Kit-Diaphragm | 1 |
| 31***69 | Kit-Valve | 1 |
276-5032 Cylinder & Mtg Gp-Apron
| 00***14 | Coupling-Pipe | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
350-1625 Extension Ar -Power Main Frame Extension
| 35***25 | Extension Ar; -Power Main Frame Extension | 1 |
288-9424 Extension Ar -Electric Heat, 7-M
| 28***24 | Extension Ar; -Electric Heat, 7-M | 1 |
241-9103 Extension Ar-Auger
| 24***03 | Extension Ar-Auger | 1 |
341-2289 Extension Ar-Screed -Electric Heat, 6.5-M
| 34***89 | Extension Ar-Screed; -Electric Heat, 6.5-M | 1 |
328-9570 Extension Ar-Screed -Electric Heat, 5.5-M
| 32***70 | Extension Ar-Screed; -Electric Heat, 5.5-M | 1 |
366-6858 Extension Ar-Screed -Electric Heat, 6.5-M
| 36***58 | Extension Ar-Screed; -Electric Heat, 6.5-M | 1 |
328-9593 Extension Ar-Screed -Electric Heat, 6.5-M
| 32***93 | Extension Ar-Screed; -Electric Heat, 6.5-M | 1 |
359-1030 Extension Ar-Screed -Electric Heat, 6.5-M
| 35***30 | Extension Ar-Screed; -Electric Heat, 6.5-M | 1 |
350-6037 Extension Ar-Screed -Electric Heat, 7-M
| 35***37 | Extension Ar-Screed; -Electric Heat, 7-M | 1 |
341-2290 Extension Ar-Screed -Electric Heat, 7-M
| 34***90 | Extension Ar-Screed; -Electric Heat, 7-M | 1 |
288-9426 Extension Ar-Screed -Electric Heat, 6.5-M
| 28***26 | Extension Ar-Screed; -Electric Heat, 6.5-M | 1 |
288-9422 Extension Ar-Screed -Electric Heat, 5.5-M
| 28***22 | Extension Ar-Screed; -Electric Heat, 5.5-M | 1 |
328-9606 Extension Ar-Screed -Electric Heat, 7-M
| 32***06 | Extension Ar-Screed; -Electric Heat, 7-M | 1 |
366-6675 Extension Ar-Screed -Electric Heat, 6.5-M
| 36***75 | Extension Ar-Screed; -Electric Heat, 6.5-M | 1 |
360-3420 Extension Ar-Screed -8-M
| 36***20 | Extension Ar-Screed; -8-M | 1 |
339-9631 Extension Ar-Screed -Electric Heat, 5.5-M
| 33***31 | Extension Ar-Screed; -Electric Heat, 5.5-M | 1 |
359-1040 Extension Ar-Screed -Electric Heat, 8-M
| 35***40 | Extension Ar-Screed; -Electric Heat, 8-M | 1 |
350-6036 Extension Ar-Screed -Electric Heat, 6.5-M
| 35***36 | Extension Ar-Screed; -Electric Heat, 6.5-M | 1 |
292-8833 Extension Gp-Screed -6.5-M
| 29***33 | Extension Group-Screed; -6.5-M | 1 |
253-4745 Extension Gp-Screed -Electric Heat, 24-In
| 25***45 | Extension Group-Screed; -Electric Heat, 24-In | 1 |
350-6034 Extension Gp-Screed -4.9-M
| 35***34 | Extension Group-Screed; -4.9-M | 1 |
291-8020 Extension Gp-Screed
| 29***20 | Extension Group-Screed | 1 |
287-0328 Extension Gp-Screed
| 28***28 | Extension Group-Screed | 1 |
282-8505 Extension Gp-Screed -20-Ft, 2-In
| 28***05 | Extension Group-Screed; -20-Ft, 2-In | 1 |
282-8504 Extension Gp-Screed -5.3-M
| 28***04 | Extension Group-Screed; -5.3-M | 1 |
350-6035 Extension Gp-Screed -5.5-M
| 35***35 | Extension Group-Screed; -5.5-M | 1 |
292-0674 Extension Gp-Screed
| 29***74 | Extension Group-Screed | 1 |
287-0329 Extension Gp-Screed
| 28***29 | Extension Group-Screed | 1 |
350-6033 Extension Gp-Screed -6.2-M
| 35***33 | Extension Group-Screed; -6.2-M | 1 |
253-4744 Extension Gp-Screed
| 25***44 | Extension Group-Screed | 1 |
292-0673 Extension Gp-Screed
| 29***73 | Extension Group-Screed | 1 |
282-8509 Extension Gp-Screed
| 28***09 | Extension Group-Screed; -5.5-M | 1 |
282-8507 Extension Gp-Screed -18-Ft
| 28***07 | Extension Group-Screed; -18-Ft | 1 |
282-8506 Extension Gp-Screed -16-Ft
| 28***06 | Extension Group-Screed; -16-Ft | 1 |
301-1469 Hitch Gp-Truck
| 30***69 | Hitch Group-Truck | 1 |
263-5151 Housing Gp-Eccentric Weight -Extension
| 26***51 | Housing Group-Eccentric Weight; -Extension | 1 |
263-5150 Housing Gp-Eccentric Weight -Main, Rh
| 26***50 | Housing Group-Eccentric Weight; -Main, Rh | 1 |
285-9947 Housing Gp-Eccentric Weight
| 28***47 | Housing Group-Eccentric Weight | 1 |
263-5149 Housing Gp-Eccentric Weight -Main, Lh
| 26***49 | Housing Group-Eccentric Weight; -Main, Lh | 1 |
327-4620 Indicator Gp-Tow Point
| 32***20 | Indicator Group-Tow Point | 1 |
325-4950 Plate Gp-Slide
| 32***50 | Plate Group-Slide | 1 |
301-7385 Roller Ar-Push
| 30***85 | Roller Ar-Push | 1 |
301-6988 Roller Gp-Push
| 30***88 | Roller Group-Push | 1 |
112-1276 Shaft Gp-Drive -Eccentric Weight
| 11***76 | Shaft Group-Drive; -Eccentric Weight | 1 |
296-9358 Shaft Gp-Vibratory -Eccentric, Lh
| 29***58 | Shaft Group-Vibratory; -Eccentric, Lh | 1 |
296-9357 Shaft Gp-Vibratory -Eccentric, Rh
| 29***57 | Shaft Group-Vibratory; -Eccentric, Rh | 1 |
251-0764 Tamper Gp-Screed
| 25***64 | Tamper Group-Screed | 1 |
350-9123 Tamper Gp-Screed
| 35***23 | Tamper Group-Screed | 1 |
350-9125 Tamper Gp-Screed -Front, Rh
| 35***25 | Tamper Group-Screed; -Front, Rh | 1 |
359-1033 Tamper Gp-Screed
| 35***33 | Tamper Group-Screed | 1 |
350-9126 Tamper Gp-Screed -Rear, Lh
| 35***26 | Tamper Group-Screed; -Rear, Lh | 1 |
350-9124 Tamper Gp-Screed -Front, Lh
| 35***24 | Tamper Group-Screed; -Front, Lh | 1 |
292-4010 Tamper Gp-Screed -Lh
| 29***10 | Tamper Group-Screed; -Lh | 1 |
292-4011 Tamper Gp-Screed -Rh
| 29***11 | Tamper Group-Screed; -Rh | 1 |
350-9127 Tamper Gp-Screed -Rear, Rh
| 35***27 | Tamper Group-Screed; -Rear, Rh | 1 |
359-1038 Tamper Gp-Screed
| 35***38 | Tamper Group-Screed | 1 |
339-9762 Tube Gp-Extension -Sliding
| 33***62 | Tube Group-Extension; -Sliding | 1 |
340-0125 Tube Gp-Extension -Sliding
| 34***25 | Tube Group-Extension; -Sliding | 1 |
251-0767 Tube Gp-Extension -Telescoping
| 25***67 | Tube Group-Extension; -Telescoping | 1 |
Lubrication System
329-9440 Filter Gp-Engine Oil
| 21***81 | Cover As | 1 |
| 22***63 | Valve As-Air | 1 |
| 25***02 | Filter Element As-Air; (Primary) | 1 |
332-6608 Lines Gp-Fan Drive
| 13***99 | Clamp As | 1 |
| 17***92 | Lanyard | 2 |
| 28***75 | Cover | 1 |
298-5112 Pump Gp-Engine Oil
| 11***79 | Gasket | 2 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 8 |
| 18***27 | Plate | 2 |
Machine Arrangement
321-2417 Chassis Ar
| 27***04 | Lines Group-Grease | 1 |
| 27***69 | Guide Group-Steering | 1 |
| 32***17 | Chassis Ar | 1 |
321-2414 Common Ar
| 29***41 | Undercarriage Ar | 1 |
| 32***14 | Common Ar | 1 |
| 32***15 | Electrical Ar | 1 |
355-7312 Common Ar
| 29***41 | Undercarriage Ar | 1 |
| 32***15 | Electrical Ar | 1 |
| 32***16 | Hydraulic Ar | 1 |
328-9592 Conversion Ar-Screed -Electric Heat, 750-Mm Extension
| 32***79 | Plate & Heater Group-Screed; -750-mm Extension | 1 |
| 32***81 | Blade & Heater Group-Tamper; -750-mm Extension | 1 |
| 32***91 | Wiring Group-Screed Heater; -750-mm Extension | 1 |
295-2101 Conversion Ar-Screed -Electric Heat
| 29***01 | Conversion Ar-Screed; -Electric Heat | 1 |
| 29***11 | Plate & Heater Group-Screed | 1 |
| 29***12 | Blade & Heater Group-Tamper | 1 |
299-7244 Conversion Ar-Screed -Electric Heat, 250-Mm Extension
| 03***57 | Washer; (13x26x6-mm Thk) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
356-4009 Distribution Ar
| 27***34 | Control Group-Thickness; -Lh Thread | 1 |
| 28***25 | Lighting Group-Flood | 1 |
| 29***12 | Sensor Group-Position | 1 |
356-4010 Distribution Ar
| 19***79 | Sensor Group-Auger | 1 |
| 27***34 | Control Group-Thickness; -Lh Thread | 1 |
| 28***25 | Lighting Group-Flood | 1 |
356-4008 Distribution Ar
| 16***20 | Control Group-Thickness; -Lh Thread | 1 |
| 28***25 | Lighting Group-Flood | 1 |
| 29***12 | Sensor Group-Position | 1 |
327-4619 Kit-Maintenance
| 10***84 | Relay As; (24-Volt) | 1 |
| 10***87 | Switch As-Toggle; (Screed Raise/Hld/Float) | 1 |
| 11***90 | Fuse; (10 Amp) | 2 |
354-8216 Option Ar-Hopper
| 32***73 | Hopper Group; -Hydraulic | 1 |
| 34***06 | Flashing Group; -Plastic-Hydraulic Fold | 1 |
| 35***16 | Option Ar-Hopper | 1 |
354-8217 Option Ar-Hopper
| 32***73 | Hopper Group; -Hydraulic | 1 |
| 34***07 | Flashing Group; -Belting-Hydraulic Fold | 1 |
| 35***17 | Option Ar-Hopper | 1 |
354-8220 Option Ar-Hopper -Manual Fold
| 27***60 | Plate Group | 1 |
| 34***08 | Flashing Group; -Plastic-Manual Fold | 1 |
| 35***20 | Option Ar-Hopper; -Manual Fold | 1 |
354-8221 Option Ar-Hopper -Manual Fold, Eame
| 27***60 | Plate Group | 1 |
| 34***09 | Flashing Group; -Belting-Manual Fold | 1 |
| 35***21 | Option Ar-Hopper; -Manual Fold, Eame | 1 |
354-8227 Option Ar-Machine
| 27***79 | Control Group-Decelerator | 1 |
| 33***23 | Canopy Group | 1 |
| 33***60 | Cover Group | 1 |
354-8224 Option Ar-Machine
| 27***79 | Control Group-Decelerator | 1 |
| 32***36 | Ventilation Group-Paver | 1 |
| 33***23 | Canopy Group | 1 |
354-8223 Option Ar-Machine
| 27***84 | Cover Group-Platform | 1 |
| 32***36 | Ventilation Group-Paver | 1 |
| 32***22 | Walkway Group | 1 |
354-8222 Option Ar-Machine
| 27***79 | Control Group-Decelerator | 1 |
| 32***36 | Ventilation Group-Paver | 1 |
| 32***22 | Walkway Group | 1 |
354-8228 Option Ar-Machine
| 27***84 | Cover Group-Platform | 1 |
| 33***23 | Canopy Group | 1 |
| 33***60 | Cover Group | 1 |
354-8225 Option Ar-Machine
| 27***79 | Control Group-Decelerator | 1 |
| 32***22 | Walkway Group | 1 |
| 33***60 | Cover Group | 1 |
354-8226 Option Ar-Machine
| 27***84 | Cover Group-Platform | 1 |
| 32***22 | Walkway Group | 1 |
| 33***60 | Cover Group | 1 |
354-8231 Option Ar-Screed -Vibratory Adapter
| 33***62 | Cover Group | 1 |
| 35***31 | Option Ar-Screed; -Vibratory Adapter | 1 |
354-8232 Option Ar-Screed -Tamper, Vibratory Adapter
| 32***37 | Wiring Group-Screed Heater | 1 |
| 32***66 | Option Ar-Screed | 1 |
| 35***32 | Option Ar-Screed; -Tamper, Vibratory Adapter | 1 |
354-8233 Option Ar-Screed -Tamper, Viberatory Adptr, Eame
| 32***37 | Wiring Group-Screed Heater | 1 |
| 32***38 | Hydraulic Ar-Tamper | 1 |
| 35***33 | Option Ar-Screed; -Tamper, Viberatory Adptr, Eame | 1 |
354-8218 Option Ar-Washdown -Ecology Tank-Ecology Tank, Wand
| 32***38 | Hydraulic Ar-Tamper | 1 |
| 32***44 | Wiring Group-Screed Heater | 1 |
| 35***18 | Option Ar-Washdown; -Ecology Tank-Ecology Tank, Wand | 1 |
354-8229 Option Ar-Washdown -Diesel
| 27***57 | Reel Group-Washdown Hose | 1 |
| 33***57 | Washdown Group-Ecology | 1 |
| 35***29 | Option Ar-Washdown; -Diesel | 1 |
354-8219 Option Ar-Washdown -Ecology Tank-Ecology Tank, Reel
| 27***58 | Lines Group-Spray Down | 1 |
| 33***57 | Washdown Group-Ecology | 1 |
| 35***19 | Option Ar-Washdown; -Ecology Tank-Ecology Tank, Reel | 1 |
354-8230 Option Ar-Washdown -Diesel
| 27***58 | Lines Group-Spray Down | 1 |
| 32***67 | Washdown Group; -Diesel Fuel | 1 |
| 35***30 | Option Ar-Washdown; -Diesel, Reel | 1 |
294-0947 Screed Ar
| 25***66 | Deflector Group | 1 |
| 25***68 | Adjuster Group-Manual | 1 |
| 25***70 | Lines Group-Grease | 1 |
276-4539 Screed Ar -As3251c, U.S.
| 27***39 | Screed Ar; -As3251c, U.S. | 1 |
| 27***57 | Reel Group-Washdown Hose | 1 |
| 32***67 | Washdown Group; -Diesel Fuel | 1 |
281-6251 Screed Ar -As4251c, International
| 27***72 | Vibratory Group | 1 |
| 27***73 | Sloper Group-Power | 1 |
| 27***79 | Adjuster Group-Height | 1 |
295-2102 Screed Ar
| 25***35 | Gate Group-End | 1 |
| 25***52 | Adjuster Group-Height | 1 |
| 25***56 | Lines Group-Slope | 1 |
351-0900 Screed Ar
| 28***24 | Heater Ar-Screed; -Electric | 1 |
| 28***24 | Box Group-Screed Control; -Electronic | 1 |
| 29***35 | Crown Group-Power | 1 |
339-1637 Screed Ar
| 26***84 | Vibratory Group | 1 |
| 26***99 | Lines Group-Vibratory | 1 |
| 29***13 | Frame Group-Screed | 1 |
356-8831 Special Ar-Screed -Folding Endgate
| 29***23 | Cylinder Block Group-Short | 1 |
| 29***85 | Cylinder Block Group | 1 |
| 29***86 | Crankshaft Group | 1 |
356-8830 Special Ar-Screed
| 28***24 | Heater Ar-Screed; -Electric | 1 |
| 28***24 | Box Group-Screed Control; -Electronic | 1 |
| 29***35 | Crown Group-Power | 1 |
Operator Station
330-9923 Canopy Gp
| 13***20 | Shaft | 2 |
| 13***77 | Lockout | 2 |
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
327-5324 Console Gp-Operator
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 19***19 | Roller | 4 |
| 19***20 | Shaft | 2 |
347-1972 Control Gp-Steering
| 34***72 | Control Group-Steering | 1 |
| 35***40 | Plate | 4 |
| 7X***75 | Bolt-Plt; (M16 X 2.0 X 130) | 4 |
347-1851 Control Gp-Steering
| 34***51 | Control Group-Steering | 1 |
| 35***40 | Plate | 2 |
| 7X***75 | Bolt-Plt; (M16 X 2.0 X 130) | 4 |
347-1976 Control Gp-Steering
| 30***87 | Bar-Ballast | 1 |
| 34***76 | Control Group-Steering | 1 |
| 35***40 | Plate | 4 |
343-7125 Control Gp-Steering
| 30***87 | Bar-Ballast | 1 |
| 34***25 | Control Group-Steering | 1 |
| 35***40 | Plate | 2 |
284-8905 Control Gp-Unprgmed Monitor -Advisor
| 28***05 | Control Group-Unprgmed Monitor; -Advisor | 1 |
| 35***40 | Plate | 4 |
| 35***99 | Plate | 2 |
274-8748 Control Gp-Unprgmed Monitor -Advisor
| 27***48 | Control Group-Unprgmed Monitor; -Advisor | 1 |
| 30***87 | Bar-Ballast | 1 |
| 35***40 | Plate | 4 |
330-6558 Display Gp-Monitor
| 1A***68 | Nut | 1 |
| 31***02 | Plate As | 1 |
| 31***03 | Tube As | 1 |
330-6089 Display Gp-Monitor -Unprogrammed
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
| 1A***68 | Nut | 2 |
348-3782 Display Gp-Monitor
| 1A***68 | Nut | 1 |
| 31***02 | Plate As | 1 |
| 34***82 | Display Group-Monitor; -Accugrade | 1 |
327-5718 Floor Mat Gp
| 22***51 | Bracket | 1 |
| 32***18 | Floor Mat Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
321-2435 Guard Gp-Vandalism
| 13***49 | Cable As | 2 |
| 31***59 | Plate | 2 |
| 31***60 | Flashing | 2 |
250-2297 Meter Gp-Service -White Backlight
| 12***73 | Extension As | 2 |
| 12***20 | Shim; (1.65-mm Thk) | 8 |
| 24***82 | Plate | 2 |
321-2421 Operator Ar
| 16***39 | Bolt; (5/8-11x3.5-In) | 6 |
| 18***25 | Scraper; (Brass) | 6 |
| 19***57 | Scraper As | 6 |
327-5332 Panel Gp-Control -Lh
| 10***16 | Cover-Work Light | 2 |
| 13***82 | Arm-Mirror | 2 |
| 13***83 | Mirror-Convex | 2 |
327-5333 Panel Gp-Control -Rh
| 10***49 | Reflector-Yellow | 8 |
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 13***82 | Arm-Mirror | 2 |
261-7148 Pedal Gp-Governor -Electronic
| 09***22 | Ring-Retaining | 4 |
| 26***48 | Pedal Group-Governor; -Electronic | 1 |
| 31***16 | Plate Group-Screed; -Rh | 1 |
332-8951 Platform Gp-Operator -Lh
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
276-4588 Platform Gp-Operator
| 27***43 | Cover | 2 |
| 27***88 | Platform Group-Operator | 1 |
| 9X***42 | Screw-Truss Head (M6x1.0x12mm); (M6x1.00x12mm) | 6 |
350-5949 Platform Gp-Operator
| 10***88 | Extension As | 1 |
| 35***49 | Platform Group-Operator | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
295-3087 Platform Gp-Operator
| 09***22 | Ring-Retaining | 4 |
| 11***33 | Washer; (11x50x6-mm Thk) | 8 |
| 25***67 | Nut; (M20x1.5-Thd) | 4 |
286-3618 Platform Gp-Operator
| 09***49 | Bolt; (M8x1.25x40-mm) | 14 |
| 13***40 | Locknut; (M8x1.25-Thd) | 6 |
| 23***06 | Bumper | 1 |
315-3700 Platform Gp-Operator -Slide
| 09***85 | Locknut; (M16x2-Thd) | 8 |
| 15***49 | Screw-Flat Head; (M10x1.5x25-mm) | 28 |
| 19***84 | Locknut; (M10x1.5-Thd) | 28 |
332-8950 Platform Gp-Operator -Rh
| 10***31 | Nut-Spring | 8 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 8 |
| 12***80 | Locknut; (M12x1.75-Thd) | 18 |
199-4298 Seat Gp-Suspension -Vinyl
| 10***90 | Extension As | 1 |
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
235-3151 Seat Gp-Suspension -Vinyl
| 12***09 | Screw-Flat Head; (M10x1.5x20-mm) | 8 |
| 17***11 | Locknut; (M16x2-Thd) | 4 |
| 18***99 | Connector As | 2 |
187-6649 Umbrella Gp
| 18***49 | Umbrella Group; -Ap-650b | 1 |
| 27***42 | Plate | 2 |
| 28***01 | Screw-Button Head; (M10x1.5x40-mm) | 14 |
106-8541 Umbrella Gp
| 10***41 | Umbrella Group; -Bg-225c | 1 |
| 27***27 | Fitting-Grease | 4 |
| 5W***17 | Fitting-Grease | 12 |
Power Train
297-8145 Drive Gp-Final
| 27***42 | Plate | 2 |
| 28***01 | Screw-Button Head; (M10x1.5x40-mm) | 14 |
| 29***45 | Drive Group-Final | 1 |
352-2524 Drive Gp-Hydrostatic
| 15***74 | Bolt-Round Head; (M12x1.75x60-mm) | 5 |
| 25***07 | Bolt-Round Head; (M12x1.75x65-mm) | 12 |
| 27***62 | Flashing | 1 |
323-8176 Hydraulic Ar-Propel
| 15***74 | Bolt-Round Head; (M12x1.75x60-mm) | 5 |
| 25***07 | Bolt-Round Head; (M12x1.75x65-mm) | 12 |
| 27***48 | Plate | 1 |
323-8184 Lines Gp-Propel
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 09***85 | Locknut; (M16x2-Thd) | 2 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 4 |
356-6905 Solenoid Gp-Proportional
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
Service Equipment And Supplies
7r-4741 Lines Gp-Spray Down
| 7R***41 | Lines Group-Spray Down | 1 |
278-0358 Lines Gp-Spray Down
| 27***58 | Lines Group-Spray Down | 1 |
351-0902 Plate & Film Gp
| 35***02 | Plate & Film Group | 1 |
309-1496 Plate & Film Gp
| 30***96 | Plate & Film Group | 1 |
286-3619 Plate & Film Gp
| 28***19 | Plate & Film Group | 1 |
276-4609 Plate & Film Gp
| 27***09 | Plate & Film Group | 1 |
321-2442 Plate & Film Gp -International
| 32***42 | Plate & Film Group; -International | 1 |
321-2441 Plate & Film Gp -U.S.
| 32***41 | Plate & Film Group; -U.S. | 1 |
333-2710 Plate & Film Gp -U.S.
| 33***10 | Plate & Film Group; -U.S. | 1 |
340-4328 Plate & Film Gp -International
| 34***28 | Plate & Film Group; -International | 1 |
295-3081 Plate & Film Gp
| 29***81 | Plate & Film Group | 1 |
266-4529 Pump & Motor Gp-Washdown -Water-Emulsion-Diesel Fuel
| 26***29 | Pump & Motor Group-Washdown; -Water-Emulsion-Diesel Fuel | 1 |
278-0357 Reel Gp-Washdown Hose
| 27***57 | Reel Group-Washdown Hose | 1 |
321-2467 Washdown Gp -Diesel Fuel
| 32***67 | Washdown Group; -Diesel Fuel | 1 |
330-5957 Washdown Gp-Ecology
| 33***57 | Washdown Group-Ecology | 1 |
Slope And Grade Control
333-1224 Beam Gp-Transverse
| 33***24 | Beam Group-Transverse | 1 |
298-0648 Cable Gp-Control
| 29***48 | Cable Group-Control | 1 |
298-0647 Cable Gp-Control
| 29***47 | Cable Group-Control | 1 |
279-2461 Control Gp-Grade & Slope
| 27***61 | Control Group-Grade & Slope | 1 |
330-6083 Control Gp-Grade & Slope -Accugrade
| 33***83 | Control Group-Grade & Slope; -Accugrade | 1 |
207-8265 Control Gp-Grade & Slope
| 20***65 | Control Group-Grade & Slope | 1 |
298-0645 Control Gp-Grade & Slope
| 29***45 | Control Group-Grade & Slope | 1 |
209-3130 Control Gp-Grade & Slope
| 20***30 | Control Group-Grade & Slope | 1 |
337-9988 Control Gp-Grade & Slope -Accugrade
| 33***88 | Control Group-Grade & Slope; -Accugrade | 1 |
298-0642 Sensor Gp-Grade
| 29***42 | Sensor Group-Grade | 1 |
357-8491 Sensor Gp-Grade
| 35***91 | Sensor Group-Grade | 1 |
258-6580 Sensor Gp-Sonic -Averaging Ski
| 25***80 | Sensor Group-Sonic; -Averaging Ski | 1 |
282-8520 Sensor Gp-Sonic
| 28***20 | Sensor Group-Sonic | 1 |
330-6084 Sensor Gp-Sonic
| 33***84 | Sensor Group-Sonic | 1 |
348-3783 Sensor Gp-Sonic
| 34***83 | Sensor Group-Sonic | 1 |
257-6255 Ski Gp-Averaging
| 25***55 | Ski Group-Averaging | 1 |
Undercarriage
187-3073 Bogie Gp
| 10***04 | Tube; (1.1-M) | 1 |
| 10***34 | Tube As | 1 |
| 10***49 | Collar | 2 |
297-8144 Frame Gp-Track Roller -Rh
| 28***78 | Connector | 1 |
| 28***79 | Connector As | 1 |
| 29***79 | Rod-Threaded | 2 |
297-8143 Frame Gp-Track Roller -Lh
| 08***77 | Adapter | 1 |
| 1G***70 | Extension-Curve | 1 |
| 1G***79 | Hose As | 1 |
299-0578 Frame Gp-Track Roller -Rh
| 18***68 | Plate-Serial Number | 1 |
| 1P***07 | Film-Symbol; 2 On Bottom Of Upper Frame Below Engine. 2 On Front Of Upper Frame Above Boom Articulation | 2 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
299-0575 Frame Gp-Track Roller -Lh
| 10***14 | Handle | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***68 | Plate-Serial Number | 1 |
193-2438 Roller Gp-Track
| 15***79 | Film-Instruction; (Grease)(Instructions) | 8 |
| 16***89 | Tack-Fastener | 4 |
| 18***68 | Plate-Serial Number | 1 |
188-0535 Tensioner Gp-Track -Idler Hub
| 18***35 | Tensioner Group-Track; -Idler Hub | 1 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
| 29***22 | Film-Danger; (Shock, Electrocution Hazard) | 7 |
321-2443 Track Gp
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
321-2429 Track Gp
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
297-8141 Undercarriage Ar
| 11***73 | Film-Stripe; (450-cm Each) | 0 |
| 11***75 | Film-Identification; (Barber-Greene)(Barber-Greene) | 3 |
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
AP555E serial number reference
The product identification plate is a riveted metal tag on the main frame/tractor chassis, usually low on the left side near the operator's platform, readable without removing any covers. It carries the full PIN; the first three characters are the letter/number prefix that identifies the model and configuration, and the digits after that are the sequential unit number for that prefix (for example A5D00252). If the plate is damaged, the same number is stamped into the frame at the same general location.
| Prefix | Identifies | Notes |
|---|---|---|
| A5D | AP555E tracked (Mobil-Trac undercarriage) asphalt paver | Powered by the Cat C4.4 ACERT engine, a turbocharged 4-cylinder rated about 106 kW (144 metric hp / 142 hp), meeting Tier 3 / Stage IIIA emissions. Production spans roughly 2011/2012 into 2015, with AP555F-tagged units (electric quick-heat screed generator) showing up by 2016. Real-world units on record run from A5D00001 up through the low 400s by 2015. The wheeled version of this paving platform, the BG555E, uses its own separate serial prefix and is not part of this range. |
Frequently asked questions
What engine powers the Cat AP555E asphalt paver?
A Cat C4.4 ACERT diesel, a turbocharged four-cylinder rated about 106 kW (142-144 hp), built to Tier 3/Stage IIIA emissions rules with no DEF or SCR aftertreatment.
What is the operating weight of the AP555E?
Operating weight runs 16,005-17,710 kg (35,290-39,044 lb), depending on which screed, AS2252C, AS3251C, AS4251C, or AS4252C, is fitted.
What replaced the Cat AP555E?
Caterpillar moved to the Tier 4 Final AP555/AP555F platform, which adds DEF and SCR aftertreatment along with a newer screed generation. That is a different engine platform, not a straight parts carryover, so confirm the A5D serial prefix before ordering AP555E-specific parts.
What AP555E owners discuss
What engine quirks show up on the AP555E's C4.4 ACERT, and what's cold-start behavior like?
The AP555E runs the turbocharged four-cylinder C4.4 ACERT, Tier 3/Stage IIIA, no DEF or SCR, serial prefix A5D. Owners running this same C4.4 ACERT block on other Cat machines report rough idle and unstable fuel rail pressure with no fault code thrown, usually traced to a weak fuel pressure sensor or a pump losing capacity rather than the ECM itself. Cold starts can be stubborn without an ether aid in freezing weather, and a handful report an ECM fuse blowing intermittently under vibration or heat cycling. Check rail pressure on the display before condemning a sensor, and inspect the high-pressure pump and rail fittings for weeping. Have your dealer verify fuel system diagnostics before swapping parts.
What hydraulic problems come up specifically on the AP555E or E-series pavers generally?
A known E-series issue: the auxiliary hydraulic pump can stick at full stroke and burn out the ventilation blower motors, common enough that a service bulletin covers it. Separately, screed extension vibrator bearings are a wear point on this platform; a failed bearing there can let the coupler between the hydraulic motor and vibrator shaft separate, killing vibration on that side while the motor itself tests fine. If a vent fan quits or one side of the screed stops vibrating, check pump stroke and the vibrator coupler before replacing the motor. Have your dealer verify aux pump stroke settings.
How does the Mobil-Trac rubber undercarriage hold up, and what wear should owners watch for?
The Mobil-Trac belt is a thick rubber track with internal steel cable reinforcement, offered in tread-bar or smooth-tread versions. It carries no separate final-drive fluid to check, so it runs lower-maintenance than a steel-track undercarriage day to day. The bogie wheel arrangement flexes over rough ground for a smoother ride than steel track, but the belt itself is vulnerable to cuts from curbs, milled edges, and debris left on staging areas. Watch belt edges for chunking and check bogie wheels for flat-spotting or seal weeping. Varying paving patterns instead of always pivoting the same direction on the same spot reduces edge wear.
What electrical or sensor gremlins are common on this generation of Cat paver?
Connector corrosion at harness plugs is a recurring issue on Cat equipment of this era, especially connectors that sit low near the undercarriage or engine bay and take splash and washdown water. Corrosion shows up as a white or grey film on the pins and causes intermittent sensor dropouts rather than a hard failure; engine speed, fuel pressure, and screed temperature sensors are typical victims. Pulling and cleaning the suspect connector with electrical contact cleaner and dielectric grease often resolves it without replacing the sensor. If fault codes keep recurring after a connector clean, have your dealer verify harness insulation condition.
What wears out fastest on the feeder system and screed, and how often does it need replacing?
The screed plate wears fastest of anything on the machine; expect to replace a set roughly once or twice a paving season depending on tonnage run through it. A new plate is about 13 mm (0.5 in) thick, and once any of the four corners measures down near 6 mm (0.25 in), budget for replacement. Auger flights go from square-edged to pointed with wear and start leaving streaks in the finished mat; grab the auger by hand to check for bearing play, since looseness there means seals and bearings need attention. Feeder floor plates can warp from heat and abrasion, and conveyor chains sag and need re-tensioning as they stretch with use.
What do mechanics say about day-to-day serviceability on this paver?
Grease fittings and hydraulic connections on pavers in general sit in tight spots that need awkward reaches or panel removal just to get a grease gun or wrench on them, and the AP555E is no exception. One inspection of an AP555E turned up several hydraulic fittings seeping slowly, the kind of leak that goes unnoticed until oil has been tracking down a hose for a while. Building a wipe-down-and-eyeball check of fittings at the pumps, extension cylinders, and vibrator motors into the daily walkaround catches these before they become a bigger repair.
What should I check before buying a used AP555E?
Confirm the serial prefix reads A5D; that identifies the Tier 3/Stage IIIA C4.4 ACERT generation covered here, distinct from later DEF-equipped pavers sold under a similar model name. Pull maintenance records and hour history, and ask specifically about screed plate replacement intervals and auger bearing service. Physically check screed plate thickness at all four corners, auger flight sharpness and bearing play, Mobil-Trac belt condition for cuts or chunking plus bogie wheel wear, hydraulic fittings around the pumps and extension cylinders for seepage, and the screed heat generator and breakers for proper cycling. Start the engine cold if possible to gauge starting behavior and idle stability, and check wiring connectors for corrosion if any fault codes are stored. Have your dealer run a full diagnostic and inspect the aux hydraulic pump stroke and ventilation motors before final sign-off.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific AP555E part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.