Caterpillarasphalt paver
Caterpillar AP500E
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar AP500E is a mid-size wheeled asphalt paver, the wheel-propelled member of the mid-range E-series paving line Caterpillar introduced in 2012 alongside the tracked AP555E. It runs a Cat C4.4 ACERT four-cylinder turbocharged diesel rated at 106 kW (144 metric hp / 142 hp), built to Tier 3/Stage IIIA-equivalent emissions. Operating weight runs roughly 15.3-15.5 tonnes (about 33,700-34,700 lb) depending on the screed fitted: the vibratory AS2252C, the wider AS3251C, or the tamper-bar AS4252C, which extends with add-on sections to cover wide paving widths. The AP500E sits in Cat's mid-range paver class, built for urban streets, parking lots, and intermediate lift work rather than mainline interstate paving.
The E-series update brought more screed choices, a fumes-management system that pulls exhaust away from both the paver and screed operators, and easier day-to-day service access over the prior mid-range generation. After the AP500E's run, Caterpillar carried the model number forward without the E suffix for a Tier 4 Final/Stage V update: a higher-output C4.4 (110 kW / 148 hp) paired with the newer SE47-series screeds and DEF/SCR aftertreatment, later joined by the AP500F with quick-heating electric screed technology. In the used and parts market, AP500E units stay in demand because their simpler Tier 3-era engine and hydraulic architecture, with no exhaust aftertreatment to service, cost less to keep running. Parts commonality with the tracked AP555E sibling, which shares the same engine family and similar screed and hydraulic components, also keeps replacement parts easier to source.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar AP500E specifications
Engine
| Engine model | Cat C4.4 with ACERT Technology, 4-cylinder turbocharged diesel, Cat common rail fuel system |
| Gross power | 106 kW (142 hp imperial, 144 hp metric) |
| Displacement | 4.4 L (269 in3) |
| Cylinders | 4 |
| Emissions tier | U.S. EPA Tier 3 / EU Stage IIIA |
| Oil change interval | 500 hours |
Weights
| Tractor only | 12 590 kg (27,760 lb) |
| Tractor with hard-top canopy | 12 945 kg (28,539 lb) |
| Operating weight w/AS2252C Vers-A-Mat screed (no canopy) | 15 290 kg (33,715 lb) |
| Operating weight w/AS3251C Extend-A-Mat screed (no canopy) | 15 520 kg (34,220 lb) |
| Operating weight w/AS4252C tamper bar/vibratory screed (with canopy) | 16 145 kg (35,594 lb) |
| Screed configuration note | AS4251C screed is not offered on the AP500E (wheel undercarriage); it is reserved for the track-mounted AP555E sibling |
Dimensions
| Tractor length w/push roller | 4.38 m (14' 4") |
| Length w/push roller and AS2252C screed, walkway up | 5.46 m (17' 11") |
| Length w/push roller and AS2252C screed, walkway down | 5.80 m (19') |
| Length w/push roller and AS3251C screed | 6.11 m (20') |
| Length w/push roller and AS4252C screed | 5.75 m (18' 10") |
| Wheel gauge width (outside to outside) | 2.49 m (8' 2") |
| Transport width with screed end gates (hopper raised) | 2.72 m (8' 11") |
| Transport width without screed end gates (hopper raised) | 2.50 m (8' 2") |
| Tractor operating width (hopper lowered) | 3.31 m (10' 10") |
| Operating height | 3.84 m (12' 7") |
| Transport height (fumes stack and seat lowered) | 2.82 m (9' 3") |
| Truck entry height (apron) | 545 mm (21") |
| Truck entry width | 3.20 m (10' 6") |
| Hopper length | 1.96 m (6' 5") |
| Deck height | 1.78 m (5' 10") |
Performance
| Paving speed | 61 mpm (200 fpm) |
| Paving speed with tamper bar screed | 25 mpm (82 fpm) |
| Travel speed | 0 - 16 km/h (0 - 10 mph) |
| Inside turning radius (maneuver mode) | 0.75 m (2.5 ft) |
| Max paving depth | 305 mm (12") |
| Max paving width, w/AS2252C screed | 1.88 m - 5.60 m (6' 2" - 18' 5") standard range with bolt-on extensions |
| Max paving width, w/AS3251C screed | 1.83 m - 6.15 m (6' - 20' 2") |
| Max paving width, w/AS4252C screed | 2.55 m - 7.00 m (8' 2" - 23') |
| Max material throughput | 1087 tonnes/h (1,198 tons/h) |
| Hopper capacity | 6.2 m3 (219 ft3), includes tunnels |
| Drive options | Front wheel assist or all-wheel drive optional for added traction pushing trucks or on soft base |
Service capacities (summary)
| Fuel tank | 189 L (50 gal), per the factory paver spec sheet |
| Electrical system | 24V, 75A alternator |
| Screed heat generator | 25 kW tractor-mounted generator (25 kW at 60 Hz, engine speed 1275 rpm or higher); 7 kW auxiliary power available |
| Hydraulic system | Not published in AP500E-specific factory literature reviewed; confirm capacity with your Cat dealer before service |
| Engine oil | Not confirmed for this paver installation specifically; the Cat C4.4 industrial engine family generally lists a refill capacity near 11 L (11.6 qt), sump-dependent |
| Cooling system | Not confirmed for this paver installation specifically; Cat C4.4 industrial engine data generally shows a range near 7-11 L (7.4-11.4 qt) depending on configuration |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
AP500E fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat C4.4 ACERT (Tier 3/Stage IIIA) | approx. 11 L (11.6 US qt), sump-dependent; not published on an AP500E-specific spec sheet | Cat DEO or DEO-ULS; SAE 15W-40 in warm climates, SAE 10W-30 for cold-weather starting |
| Cooling system (total) | approx. 7-11 L (7.4-11.4 US qt), varies by configuration; not confirmed on an AP500E-specific spec sheet | Cat ELC (Extended Life Coolant), factory premix 50/50 ethylene-glycol/water |
| Fuel tank | 189 L (50 US gal), per the factory paver spec sheet | Ultra-low-sulfur No. 2 diesel; use a winterized/cold-weather blend below freezing |
| Transmission / final drives / axles | not applicable as a separate compartment | Propel system is hydrostatic wheel drive fed from the main hydraulic tank; no dedicated gearbox or axle oil listed in the paver's refill-capacity table |
| Hydraulic system and tank | not published in AP500E-specific factory literature reviewed; confirm capacity with your Cat dealer before service | Cat HYDO Advanced, wide-temperature multigrade hydraulic oil |
| Washdown/release-agent spray tank | approx. 32 L (8.5 US gal); confirm for your specific build | Water with an approved asphalt release/anti-stick agent |
| Grease (spec only) | n/a - service points only, no reservoir capacity | Cat Multipurpose Grease (MPGM) for general pins/bushings; Cat Advanced 3Moly Grease where medium-load, medium-speed extension/pivot points call for it |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar AP500E maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the AP500E beyond the schedule
Predictive Maintenance & Fluid Analysis
The AP500E's Cat C4.4 ACERT engine responds well to scheduled S.O.S oil sampling, catching bearing and ring wear before a rebuild becomes mandatory. Pull hydraulic oil samples at the same interval; the paver's pump and motor circuit runs hot in continuous paving cycles and shows wear metals early. Sample coolant condition to track ELC depletion rather than blind-changing it. Watch screed heater amperage draw on the AS2252C/AS3251C/AS4252C screeds; a slow climb signals a failing element before it strands a mix in the hopper.
Corrective & Common Repairs
Expect abrasive wear on auger bearings and flight paddles from hot mix contact, plus stretch in the conveyor slat chains and flight bars feeding the hopper to the auger. On tamper bar screeds (AS4252C), bushings and pins wear loose and cause a rough mat finish; check play before blaming grade control. Propel-side wheel bearings and drive motors take abuse from stop-start paving; listen for growl under load. Screed heater elements and wiring harnesses fail from thermal cycling; isolate faulty zones rather than replacing the whole harness.
Overhaul & Rebuild Points
High-hour AP500E units typically need auger and conveyor gearbox rebuilds first, since feed-system gearing takes the most continuous load in the paver. Hydraulic pump and propel motor rebuilds follow, especially on machines run hard in continuous-paving service. Screed extension slides and wear strips need periodic renewal to hold crown and cross-slope accuracy. The C4.4 ACERT engine itself is comparatively low-maintenance at this displacement; top-end work on valves and injectors is the usual overhaul point rather than a full inframe rebuild.
Seasonal & Environment Servicing
Cold-weather startups on the C4.4 need block-heater use and a coolant freeze-point check; confirm hydraulic oil is rated for ambient temperature, since a cold, thick fill starves the propel and screed circuits. In hot climates, clean the radiator and hydraulic cooler of baked-on asphalt dust often; restricted airflow is the top cause of overheating shutdowns on paving crews. Wash cured asphalt from the hopper, augers, and screed plates every shift; buildup left overnight is far harder to remove and accelerates wear on augers and tamper bars.
AP500E common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 299-8229 | Filter-Fuel | Fuel system service | Check fitment → |
| 343-7104 | Filter As-Fuel | Fuel system service | Check fitment → |
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 311-1110 | Filter As-Fuel | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
AP500E fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 0110 FMI 03 | Engine coolant temperature sensor circuit voltage above normal | Open circuit or short to supply voltage on the coolant temp sensor wiring, or a failed sensor | Check the 2-pin sensor connector for corrosion or damage, verify sensor supply/return voltage, replace sensor if wiring checks out good |
| CID 0110 FMI 04 | Engine coolant temperature sensor circuit voltage below normal | Short to ground on the sensor signal wire or a shorted sensor element | Disconnect sensor and check circuit resistance to ground, repair chafed wiring or replace sensor |
| CID 0100 FMI 01 | Engine oil pressure data valid but below normal operating range | Low oil level, worn oil pump, clogged filter, or a failing oil pressure sensor | Stop engine, check oil level and condition immediately, inspect filter and pressure sensor before restart |
| CID 0190 FMI 08 | Engine speed/timing sensor abnormal frequency, pulse width, or period | Damaged timing sensor, excessive air gap, or wiring fault between sensor and ECM | Inspect sensor mounting and air gap, check wiring for damage, reseat or replace sensor |
| CID 0168 FMI 04 | Electrical system (battery) voltage below normal | Weak or discharged battery, loose/corroded battery terminals, or a failing alternator | Load-test battery, clean and tighten terminal connections, check alternator output |
| CID 0091 FMI 02 | Throttle position signal erratic, intermittent, or incorrect | Worn throttle position sensor, loose connector, or chafed harness near the engine speed control linkage | Inspect throttle sensor connector and linkage, recalibrate or replace sensor if signal remains unstable |
| CID 2930 FMI 05 | Right screed extender activation solenoid current below normal | Open circuit in the extender solenoid coil or wiring, or a disconnected solenoid connector | Check solenoid connector and coil resistance, repair open wiring or replace solenoid |
| CID 0972 FMI 02 | Left auger mode switch signal erratic, intermittent, or incorrect | Worn or contaminated operator station switch, or a loose connector in the switch harness | Inspect and clean the switch contacts, check connector for corrosion, replace switch if intermittent fault persists |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
AP500E attachments & work tools
Screed family (interchangeable, tractor-mounted)
AP500E runs one of three factory screeds: AS2252C and AS3251C vibratory screeds, or the AS4252C tamper-bar screed. Base hydraulic paving range is about 2.5-5m (8.2-16.4ft) before extensions, varying by screed choice.
AS2252C narrow front-extender screed
Vibratory screed with narrow front-mounted extenders using 229mm-wide screed plates. Suited to urban work and paving close to obstacles, reducing handwork when changing widths.
AS3251C rear-extender screed
Vibratory screed with hydraulically driven, rear-mounted extenders on heavy-duty support tubes for rigidity at wider widths. Used for highway, street, and urban paving.
AS4252C tamper-bar screed
Variable-frequency tamper bars plus vibratory screed plates, double-width extenders, an LCD operating display, and electric heat. With extensions this screed reaches up to roughly 7m (23ft) paving width on the wheeled AP500E, for interstate, highway, and airport work.
Screed width extensions
Extenders are bolt-on mechanical or hydraulically powered depending on screed model, using 229-330mm wide extension plates; exact plate width varies by screed variant, so confirm against the screed fitted.
Screed plate heating
Electrically heated screed plates are standard/available across the screed lineup to bring the screed to paving temperature and maintain a consistent mat during startup and slow paving.
Feeder/auger system
Independent left/right augers and left/right conveyors are each controlled separately, eliminating feeder gates. Augers are 355mm (14in) diameter, hydraulically extendable up to about 215mm (8.5in) to match wider screed widths.
Hopper apron
A hydraulic folding front (hopper) apron is offered as a factory option to help retain and feed mix into the hopper, alongside oscillating push rollers.
Push rollers and truck hitch
Oscillating push rollers and a truck hitch are available options for engaging and pushing haul trucks during material transfer.
Grade and slope control system
The paver accepts a Cat Grade and Slope control setup using sonic sensors (including multi-sonic/ski-bar type averaging sensors), mechanical grade sensors, and slope sensors, used singly or together to hold target elevation and cross-slope automatically. These are aftermarket/factory-fit sensor kits mounted to sensor masts on the tractor, not a quick-coupler system.
Guarding
Narrow chain guard covers over the drive chains are standard equipment on the machine for operator protection and serviceability.
Operator canopy
A factory operator cabin canopy option is available for weather protection over the dual swing-out operator stations.
All AP500E assemblies by section
Every catalogued assembly group for the Caterpillar AP500E. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
328-5455 Air Cleaner Gp
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 1P***86 | Adapter | 1 |
| 27***57 | Air Cleaner Group | 1 |
270-8357 Air Cleaner Gp
| 21***81 | Cover As | 1 |
| 22***63 | Valve As-Air | 1 |
| 25***02 | Filter Element As-Air; (Primary) | 1 |
323-5667 Exhaust Gp-Flexible
| 13***99 | Clamp As | 1 |
| 17***92 | Lanyard | 2 |
| 28***75 | Cover | 1 |
333-4788 Manifold Gp-Inlet
| 11***79 | Gasket | 2 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 8 |
| 18***27 | Plate | 2 |
305-2168 Mounting Gp-Exhaust
| 30***68 | Mounting Group-Exhaust | 1 |
| 6I***63 | Nut; (M10x1.15-Thd) | 3 |
| 6I***12 | Stud | 3 |
333-4785 Turbocharger Gp
| 03***47 | Ferrule | 3 |
| 03***91 | Nut | 2 |
| 03***14 | Nut; (7/16-In) | 1 |
Basic Engine
298-5090 Camshaft Gp
| 1B***36 | Key-Woodruff | 1 |
| 27***26 | Rod-Push | 8 |
| 29***90 | Camshaft Group | 1 |
298-5111 Cover Gp-Engine
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 21***03 | Washer; (Sealing) | 1 |
323-6222 Cover Gp-Valve Mechanism
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 13***08 | Cap As; (Engine Oil Filler) | 1 |
| 16***65 | Spring; (Crankcase Breather Hose) | 1 |
298-5086 Crankshaft Gp
| 27***94 | Bolt | 3 |
| 29***86 | Crankshaft Group | 1 |
| 33***36 | Crankshaft Group | 1 |
330-1736 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 0 |
330-4789 Cylinder Block Gp
| 03***63 | Plug | 1 |
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 06***02 | Dowel | 10 |
298-5085 Cylinder Block Gp
| 20***19 | Bolt; (M8x1.25x16-mm) | 10 |
| 23***49 | Housing As | 1 |
| 29***85 | Cylinder Block Group | 1 |
298-4526 Cylinder Head As
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 27***16 | Plug-Core | 4 |
298-5088 Cylinder Head Gp
| 22***01 | Bolt; (M15x1.5x137-mm) | 10 |
| 29***26 | Cylinder Head As | 1 |
| 29***88 | Cylinder Head Group | 1 |
328-5480 Drain Gp-Engine Oil
| 10***97 | Valve-Ball | 1 |
| 14***42 | Connector Group | 2 |
| 14***11 | Plug Group | 1 |
344-4714 Drive Gp-Fan
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 28***26 | Pulley | 1 |
| 28***27 | Belt-Serpentine | 1 |
323-9874 Drive Gp-Fan
| 11***59 | Bolt; (M10x1.5x35-mm) | 5 |
| 26***28 | Pulley As-Idler | 1 |
| 26***20 | Pulley | 1 |
306-2314 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 10 |
| 10***31 | Flywheel As | 1 |
298-5110 Gear Gp-Front
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
299-5057 Housing Gp-Flywheel
| 10***57 | Plate | 1 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 14***76 | Housing-Flywheel | 1 |
299-5033 Lifting Gp-Engine
| 29***24 | Bracket | 1 |
| 29***26 | Bracket | 1 |
| 29***33 | Lifting Group-Engine | 1 |
333-4789 Mounting Gp-Engine
| 13***07 | Bracket | 1 |
| 14***81 | Spacer | 1 |
| 18***43 | Stud | 4 |
323-4650 Mounting Gp-Engine Flexible
| 12***28 | Spacer; (11x20x10-mm Thk) | 1 |
| 30***08 | Guard As-Belt | 1 |
| 30***25 | Mount As | 1 |
299-5082 Mounting Gp-Fan
| 17***71 | Bolt; (M8x1.25x20-mm) | 4 |
| 29***82 | Mounting Group-Fan | 1 |
322-8424 Pan Gp-Oil
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 4 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
298-5087 Piston & Rod Gp
| 12***36 | Ring-Retaining | 2 |
| 22***38 | Bushing | 1 |
| 22***39 | Bolt-Special; (Connecting Rod) | 2 |
298-5129 Plug Gp-Cylinder Head
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 29***29 | Plug Group-Cylinder Head | 1 |
298-5098 Plug Gp-Engine
| 22***22 | Plug-Cup | 1 |
| 29***98 | Plug Group-Engine | 1 |
298-5131 Plug Gp-Engine
| 29***31 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
298-5101 Pulley Gp-Crankshaft
| 10***41 | Bolt; (M12x1.75x25-mm) | 3 |
| 27***31 | Pulley | 1 |
| 29***01 | Pulley Group-Crankshaft | 1 |
298-5089 Rocker Arm Gp
| 29***33 | Rocker Arm Group | 1 |
| 29***89 | Rocker Arm Group | 1 |
| 33***97 | Link | 8 |
298-4533 Rocker Arm Gp
| 27***00 | Plug-Shaft End | 2 |
| 27***01 | Circlip | 1 |
| 27***06 | Spring-Shaft | 3 |
Braking System
193-8539 Pump & Valve Gp-Brake -Manual Release
| 19***39 | Pump & Valve Group-Brake; -Manual Release | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
229-9476 Pump Gp-Hand -Manual Brake Release
| 22***76 | Pump Group-Hand; -Manual Brake Release | 1 |
| 23***43 | Knob | 1 |
| 31***34 | Kit-Seal; (Check Valve) | 1 |
Controls
102-2703 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 1 |
| 10***47 | Gear-Worm | 1 |
| 10***50 | Guide-Bushing | 1 |
253-4752 Adjuster Gp-Height
| 10***24 | Tube As; (Vertical) | 4 |
| 10***39 | Key-Square | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
276-4579 Adjuster Gp-Height
| 10***03 | Adjuster Group-Height; -Manual | 2 |
| 10***04 | Bolt-Shoulder | 2 |
| 10***24 | Tube As; (Vertical) | 4 |
197-9844 Chain Gp-Screed
| 10***87 | Link-Connecting | 1 |
| 19***33 | Link-Offset | 1 |
| 19***44 | Chain Group-Screed | 1 |
277-9934 Control Gp-Thickness -Acme, Cw
| 27***84 | Film-Instruction; (Mat Thickness, Cw To Increase) | 2 |
| 27***34 | Control Group-Thickness; -Lh Thread | 1 |
| 28***90 | Shaft As | 2 |
165-4721 Control Gp-Thickness -Acme, Ccw
| 13***22 | Rod-Threaded; (1-5-Acme Thd) | 2 |
| 13***25 | Sleeve As-Adjustment | 2 |
| 16***21 | Control Group-Thickness; -Rh Thread | 1 |
287-0326 Control Gp-Thickness -Acme, Cw
| 27***84 | Film-Instruction; (Mat Thickness, Cw To Increase) | 2 |
| 28***26 | Control Group-Thickness; -Lh Thread | 1 |
| 28***26 | Shaft As | 2 |
277-9935 Control Gp-Thickness -Acme, Ccw
| 27***83 | Film-Instruction; (Mat Thickness, Ccw To Increase) | 2 |
| 27***35 | Control Group-Thickness; -Rh Thread | 1 |
| 28***94 | Shaft As | 2 |
287-0327 Control Gp-Thickness -Acme, Ccw
| 27***83 | Film-Instruction; (Mat Thickness, Ccw To Increase) | 2 |
| 28***27 | Control Group-Thickness; -Rh Thread | 1 |
| 28***24 | Shaft As | 2 |
253-4738 Control Gp-Thickness -Acme, Cw
| 1J***36 | Pin-Spring; (Spring) | 2 |
| 25***38 | Control Group-Thickness; -Lh Thread | 1 |
| 25***56 | Sleeve As-Adjustment; (Lh Thread) | 2 |
165-4720 Control Gp-Thickness -Acme, Cw
| 13***21 | Rod-Threaded; (1-5-Acme Thd, Lh) | 2 |
| 13***24 | Sleeve As-Adjustment | 2 |
| 16***20 | Control Group-Thickness; -Lh Thread | 1 |
253-4739 Control Gp-Thickness -Ccw
| 1J***36 | Pin-Spring; (Spring) | 2 |
| 25***39 | Control Group-Thickness; -Counterclockwise Rotation | 1 |
| 25***63 | Rod-Threaded; (1-8-Acme Thd) | 2 |
290-1628 Crown Gp-Power
| 10***39 | Key-Square | 1 |
| 11***50 | Sprocket; (12-Teeth) | 1 |
| 18***45 | Boss; (12.7x25.4x15.7-mm Thk) | 2 |
276-4590 Crown Gp-Power
| 10***01 | .. Roller, Bearing | 2 |
| 10***38 | Pointer | 1 |
| 10***39 | Key-Square | 1 |
196-2503 Jack Gp-Height Adjuster
| 10***64 | Bearing-Thrust | 2 |
| 11***49 | Worm | 1 |
| 19***03 | Jack Group-Height Adjuster | 1 |
102-2699 Jack Gp-Sloper
| 10***99 | Jack Group-Sloper | 1 |
| 10***46 | Gear-Worm | 1 |
| 10***49 | Guide-Bushing | 1 |
277-2004 Motor Gp-Power Adjuster
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
277-2005 Motor Gp-Power Adjuster
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
277-2006 Motor Gp-Power Adjuster
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
197-9849 Shaft Gp-Drive -Rear
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***45 | Spindle As | 1 |
282-7961 Shaft Gp-Drive -Non-Actuated
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 28***61 | Shaft Group-Drive; -Non-Actuated | 1 |
197-9850 Shaft Gp-Drive -Front
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***12 | Spindle As | 1 |
276-4573 Sloper Gp-Power
| 06***93 | Lockwasher-Bearing | 2 |
| 10***99 | Jack Group-Sloper | 2 |
| 10***00 | . Axle, Rod End | 2 |
Cooling System
299-5078 Connection Gp-Water
| 10***87 | Bolt; (M10x1.5x85-mm) | 1 |
| 12***99 | Bolt; (M10x1.5x40-mm) | 1 |
| 28***44 | Gasket-Water Regulator; (Temperature) | 1 |
353-7717 Cooler Gp-Engine Oil
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 35***14 | Cooler-Oil | 1 |
| 35***15 | Gasket | 1 |
333-4784 Cooler Gp-Engine Oil
| 22***44 | Gasket; (Engine Oil Filter Base) | 2 |
| 23***51 | Plate; (Blanking) | 1 |
| 24***60 | Head As | 1 |
298-5105 Pump Gp-Water
| 11***29 | Bolt; (M8x1.25x75-mm) | 7 |
| 22***38 | Seal-O-Ring | 1 |
| 22***19 | Gasket | 1 |
323-6980 Radiator & Hyd Oil Cooler Gp
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 00***64 | End; (Hose) | 1 |
| 00***70 | Tee-Pipe | 1 |
Electrical And Starting System
3e-6328 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
306-8856 Alternator Gp-Charging
| 10***51 | Bolt; (M8x1.25x130-mm) | 1 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 1 |
| 14***83 | Bolt; (M10x1.5x45-mm)(Starter Motor) | 2 |
327-5326 Battery & Wiring Gp
| 10***03 | Plate-Cover | 8 |
| 10***04 | Plate As | 1 |
| 10***05 | Plate | 1 |
328-9946 Box Gp-Control
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
| 27***74 | Box; (Lh) | 1 |
289-5816 Box Gp-Junction
| 28***16 | Box Group-Junction | 1 |
| 29***80 | Terminal | 1 |
| 30***01 | Terminal | 10 |
304-6436 Control Gp-Engine Electronic
| 27***01 | Connection | 2 |
| 27***02 | Seal-O-Ring | 2 |
| 30***36 | Bearing Spacer, Control Group-Engine Electronic | 1 |
321-2415 Electrical Ar
| 32***15 | Electrical Ar | 1 |
| 32***65 | Generator & Mounting Group; -Belt Drive | 1 |
| 32***24 | Console Group-Operator | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
351-5775 Electronics Gp-Implement
| 35***75 | Electronics Group-Implement | 1 |
| 35***89 | Software Group-Implement | 1 |
| 35***90 | Service Group-Implement | 1 |
351-8709 Electronics Gp-Machine
| 31***96 | Software Group-Machine | 1 |
| 35***09 | Electronics Group-Machine | 1 |
321-2465 Generator & Mounting Gp -Belt Drive
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 10***54 | Bolt; (M12x1.75x35-mm) | 3 |
| 12***96 | Seal; (1.084m) | 0 |
299-5075 Glow Plug Gp
| 29***81 | Glow Plug; (24-Volt) | 4 |
| 29***72 | Bar | 1 |
| 29***75 | Glow Plug Group | 1 |
324-6845 Installation Gp-Communication -Product Link
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***74 | Cover-Connector; (Wire Router) | 1 |
283-8145 Lamp Gp-Flood -Hid
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 22***74 | Bezel; (Hid) | 1 |
| 27***82 | Lens As; (Hid) | 1 |
234-4323 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***23 | Lamp Group-Flood; -Vertical Mount | 1 |
238-2798 Lamp Gp-Head & Signal -Lh
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 2 |
238-2797 Lamp Gp-Head & Signal -Rh
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 2 |
344-3456 Lamp Gp-Head & Signal -Lh
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 2 |
259-0134 Lamp Gp-Registration Plate
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***34 | Lamp Group-Registration Plate; -European Market | 1 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
235-3937 Lamp Gp-Warning Beacon -Amber, Rotating
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***37 | Lamp Group-Warning Beacon; -Amber, Rotating | 1 |
290-6022 Lighting Gp-Flood
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
288-6925 Lighting Gp-Flood
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 2 |
321-2440 Lighting Gp-Roading
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
354-1436 Lighting Gp-Roading
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 10***58 | Flasher As; (24-Volt) | 1 |
276-1832 Lighting Gp-Warning Beacon
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
198-8284 Lighting Gp-Warning Beacon
| 03***14 | Screw; (10-32x1-In) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
258-6918 Mounting Gp-Sensor -Sonic Sensor
| 25***18 | Mounting Group-Sensor; -Sonic Sensor | 1 |
| 28***75 | Collar | 4 |
| 28***79 | Washer; (32.5x63.5x7.1-mm Thk) | 2 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 33***45 | Radio Group-Communication; -Product Link 121sr | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
330-6085 Sensor & Mounting Gp
| 10***49 | Plate | 2 |
| 13***21 | Handle | 4 |
| 14***10 | Collar | 2 |
198-8279 Sensor Gp-Auger
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 11***07 | Knob | 2 |
| 12***44 | Paddle As | 2 |
219-2385 Sensor Gp-Position
| 12***50 | Receptacle As | 1 |
| 12***51 | Bushing | 1 |
| 12***52 | Clamp As-Cable | 1 |
278-3428 Sensor Gp-Position
| 11***24 | Clamp | 4 |
| 16***41 | Support-Sensor | 2 |
| 19***38 | Sensor Group-Sonic; (Position) | 4 |
301-0071 Sensor Gp-Position -2 Sensor
| 11***24 | Clamp | 2 |
| 19***38 | Sensor Group-Sonic; (Position) | 2 |
| 1G***11 | Shaft-Governor Control | 2 |
195-8090 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 19***90 | Sensor Group-Position; -Steering | 1 |
160-2443 Sensor Gp-Position -Rotary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
294-0112 Sensor Gp-Position
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***24 | Clamp | 2 |
| 16***41 | Support-Sensor | 2 |
266-1467 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 26***67 | Sensor Group-Position; -Brake Pedal | 1 |
284-8876 Sensor Gp-Position
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 28***76 | Sensor Group-Position | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
322-9152 Sensor Gp-Temperature
| 18***55 | Fitting-Pipe | 1 |
| 1F***13 | Locknut; (3/4-In) | 2 |
| 32***51 | Fitting | 1 |
322-9153 Sensor Gp-Temperature
| 1F***13 | Locknut; (3/4-In) | 2 |
| 23***80 | Fitting; (Pipe) | 1 |
| 32***51 | Fitting | 1 |
145-7028 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***28 | Sensor Group-Temperature; -Hydraulic Oil Temp | 1 |
| 15***43 | Sleeve; (2.8-Dm) | 0 |
334-7882 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
296-1288 Electronics Gp-Machine
| 29***88 | Software Group-Implement | 1 |
| 34***21 | Software Group-Machine | 1 |
| 34***22 | Service Group-Machine | 1 |
299-5067 Starting Motor Gp-Electric
| 22***50 | Starting Motor Group-Electric | 1 |
| 29***67 | Starting Motor Group-Electric; -24-Volt | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
237-7602 Switch Gp-Disconnect -Battery
| 23***02 | Switch Group-Disconnect; -Battery | 1 |
| 31***59 | Cover As | 1 |
172-8660 Switch Gp-Liquid Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
333-4791 Switch Gp-Pressure
| 03***63 | Plug | 1 |
| 33***91 | Switch Group-Pressure | 1 |
165-5970 Switch Gp-Toggle
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
327-5330 Wiring Gp-Electronic Control
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
298-5130 Wiring Gp-Engine
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 21***39 | Strap-Cable | 3 |
| 23***39 | Clip | 1 |
293-6541 Wiring Gp-Heater
| 10***05 | Plate | 10 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
276-4607 Wiring Gp-Heater
| 10***05 | Plate | 4 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
327-5328 Wiring Gp-Machine -Rh
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
327-5329 Wiring Gp-Machine -Rear
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
327-5327 Wiring Gp-Machine -Lh
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
333-8384 Wiring Gp-Panel -120-Vac
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 13***00 | Clip; (Tab) | 1 |
333-8385 Wiring Gp-Panel -240-Vac
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 13***00 | Clip; (Tab) | 1 |
321-2449 Wiring Gp-Power Receptacle -Nacd
| 2L***69 | Terminal-Ring; (2-Ga To 10-Ga, 3/8-In Screw) | 1 |
| 32***49 | Wiring Group-Power Receptacle; -Nacd | 1 |
| 33***25 | Wiring Group-Power Receptacle; -110-Vac | 1 |
336-0225 Wiring Gp-Power Receptacle -110-Vac
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
321-2446 Wiring Gp-Power Receptacle -220-Vac
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 1 |
| 2L***69 | Terminal-Ring; (2-Ga To 10-Ga, 3/8-In Screw) | 1 |
| 32***46 | Wiring Group-Power Receptacle; -220-Vac | 1 |
321-2447 Wiring Gp-Power Receptacle -120-Vac
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 1 |
| 2L***69 | Terminal-Ring; (2-Ga To 10-Ga, 3/8-In Screw) | 1 |
| 32***47 | Wiring Group-Power Receptacle; -120-Vac | 1 |
327-5331 Wiring Gp-Power Train
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
351-2797 Wiring Gp-Screed -Extension
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 10 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
293-6625 Wiring Gp-Screed
| 06***44 | Grommet | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
306-6661 Wiring Gp-Screed -Extension, Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
276-4606 Wiring Gp-Screed -24-Volt
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 24 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
306-6660 Wiring Gp-Screed -Extension, Rh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
276-4552 Wiring Gp-Screed -Extension
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 8 |
| 24***12 | Switch As-Toggle; (Right Extender Width Sw) | 3 |
306-8868 Wiring Gp-Screed -250-Mm Extension
| 30***60 | Wiring Group-Screed; -Extension, Rh | 1 |
| 30***61 | Wiring Group-Screed; -Extension, Lh | 1 |
| 30***68 | Wiring Group-Screed; -250-mm Extension | 1 |
306-8869 Wiring Gp-Screed Heater -250-Mm Extension
| 30***69 | Wiring Group-Screed Heater; -250-mm Extension, Cover | 1 |
| 31***52 | Wiring Group-Screed Heater; -250-mm Extension, Rh | 1 |
| 31***53 | Wiring Group-Screed Heater; -250-mm Extension, Lh | 1 |
293-7258 Wiring Gp-Screed Heater -750-Mm Extension, Rh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 2 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
319-7153 Wiring Gp-Screed Heater -250-Mm Extension, Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 4 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
319-7152 Wiring Gp-Screed Heater -250-Mm Extension, Rh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 4 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
293-7187 Wiring Gp-Screed Heater -750-Mm Extension, Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 11***18 | Clip | 2 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 1 |
321-2444 Wiring Gp-Screed Heater
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
| 17***53 | Kit-Receptacle; (4-Pin) | 2 |
| 17***56 | Kit-Connecting Plug; (4-Pin) | 2 |
328-9591 Wiring Gp-Screed Heater -750-Mm Extension
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 3 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
321-2437 Wiring Gp-Screed Heater
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
| 17***53 | Kit-Receptacle; (4-Pin) | 2 |
Electrical System
294-8232 Box Gp-Screed Control -Lh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 18 |
294-8231 Box Gp-Screed Control -Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 21 |
289-3576 Box Gp-Screed Control -Lh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 1 |
289-3575 Box Gp-Screed Control -Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 1 |
348-7769 Box Gp-Screed Control
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 12 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 13***00 | Clip; (Tab) | 6 |
Engine Arrangement
285-3201 Engine Ar-Primary
| 28***01 | Engine Ar-Primary | 1 |
| 29***23 | Cylinder Block Group-Short | 1 |
| 29***85 | Cylinder Block Group | 1 |
321-2420 Installation Ar-Engine
| 28***01 | Engine Ar-Primary | 1 |
| 32***20 | Installation Ar-Engine | 1 |
| 32***50 | Mounting Group-Engine Flexible | 1 |
Feeder Drag And Auger Conveyors
352-4611 Auger Gp
| 09***69 | Bolt | 4 |
| 10***55 | Plate | 1 |
| 17***24 | Bar | 2 |
201-5584 Bearing Gp-Auger
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
| 20***84 | Bearing Group-Auger | 1 |
106-9718 Bearing Gp-Auger
| 01***41 | Setscrew-Socket | 3 |
| 10***18 | Bearing Group-Auger | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
116-9509 Bearing Gp-Auger
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***09 | Bearing Group-Auger | 1 |
321-2419 Conveyor Ar-Drag & Auger
| 21***70 | Footshaft Group | 2 |
| 32***19 | Conveyor Ar-Drag & Auger | 1 |
| 32***44 | Guard Group-Conveyor | 1 |
352-4610 Conveyor Gp-Auger
| 10***85 | Plate | 2 |
| 10***91 | Pipe | 2 |
| 10***96 | Plate | 1 |
323-5568 Conveyor Gp-Drag
| 05***20 | Pin-Spring | 100 |
| 12***46 | Bar-Feeder | 50 |
| 32***68 | Conveyor Group-Drag | 1 |
334-7637 Door Gp-Access
| 33***37 | Door Group-Access | 1 |
| 33***39 | Panel As | 1 |
| 33***40 | Louver As | 1 |
322-9721 Door Gp-Access
| 10***56 | Rod; (Prop) | 4 |
| 11***77 | Bumper-Rubber | 4 |
| 12***27 | Spacer; (9x14x3.5-mm Thk) | 1 |
352-4622 Drive Gp-Conveyor
| 10***99 | Sprocket As; (12-Teeth) | 2 |
| 13***92 | Key-Square | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
198-8287 Extension Gp-Auger -12-In, Rh
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
231-3532 Extension Gp-Auger -6-In
| 23***32 | Extension Group-Auger; -6-In | 1 |
| 31***84 | Tube | 2 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 2 |
243-0329 Extension Gp-Auger -18-In
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 23***32 | Extension Group-Auger; -6-In | 1 |
231-2043 Extension Gp-Auger -24-In, Lh
| 23***43 | Extension Group-Auger; -24-In, Lh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
231-2042 Extension Gp-Auger -24-In, Rh
| 23***42 | Extension Group-Auger; -24-In, Rh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
199-4206 Extension Gp-Auger -12-In, Lh
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
215-1870 Footshaft Gp
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
322-7244 Guard Gp-Conveyor
| 12***54 | Screw-Flat Head; (M12x1.75x35-mm) | 48 |
| 19***40 | Plate | 2 |
| 21***33 | Plate | 2 |
323-8177 Hydraulic Ar-Conveyor
| 32***77 | Hydraulic Ar-Conveyor | 1 |
| 32***85 | Pump & Mtg Group-Conveyor | 1 |
| 32***86 | Motor & Mtg Group-Conveyor | 1 |
323-8186 Motor & Mtg Gp-Conveyor
| 10***20 | Seal-O-Ring | 2 |
| 11***80 | Elbow | 1 |
| 14***27 | Connector Group | 3 |
323-8185 Pump & Mtg Gp-Conveyor
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***25 | Connector As. | 11 |
| 14***27 | Connector Group | 2 |
263-6003 Shaft Gp-Feeder Drive
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 4 |
| 10***30 | Bearing-Flange | 2 |
| 10***70 | Key-Square | 2 |
Frame And Body
276-4589 Arm Gp-Drop
| 10***68 | Nipple-Pipe | 2 |
| 11***99 | Pin As-Pivot | 2 |
| 13***77 | Lockout | 4 |
300-9991 Arm Gp-Drop
| 13***20 | Shaft | 2 |
| 13***77 | Lockout | 2 |
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
321-2433 Arm Gp-Tow
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 19***19 | Roller | 4 |
| 19***20 | Shaft | 2 |
316-1659 Ballast & Mounting Gp -2-Plate
| 31***59 | Ballast & Mounting Group; -2-Plate | 1 |
| 35***40 | Plate | 2 |
| 7X***75 | Bolt-Plt; (M16 X 2.0 X 130) | 4 |
356-4739 Ballast & Mounting Gp -4-Plate
| 35***39 | Ballast & Mounting Group; -4-Plate | 1 |
| 35***40 | Plate | 4 |
| 7X***75 | Bolt-Plt; (M16 X 2.0 X 130) | 4 |
356-5146 Ballast & Mounting Gp -6-Plate
| 35***40 | Plate | 4 |
| 35***99 | Plate | 2 |
| 35***46 | Ballast & Mounting Group; -6-Plate | 1 |
315-1101 Brace Gp
| 1A***68 | Nut | 1 |
| 31***01 | Brace Group | 1 |
| 31***02 | Plate As | 1 |
350-6039 Brace Gp
| 1A***68 | Nut | 1 |
| 31***02 | Plate As | 1 |
| 35***39 | Brace Group | 1 |
350-5664 Brace Gp
| 1A***68 | Nut | 2 |
| 35***64 | Brace Group | 1 |
| 35***88 | Tube As-Brace | 1 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
282-8500 Bracket Gp-Support
| 12***73 | Extension As | 2 |
| 12***20 | Shim; (1.65-mm Thk) | 8 |
| 24***82 | Plate | 2 |
232-1107 Bracket Gp-Support
| 22***51 | Bracket | 1 |
| 23***07 | Bracket Group-Support | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
295-3079 Carriage Gp-Extender
| 16***39 | Bolt; (5/8-11x3.5-In) | 6 |
| 18***25 | Scraper; (Brass) | 6 |
| 19***57 | Scraper As | 6 |
321-2462 Conversion Gp-Roading
| 10***49 | Reflector-Yellow | 8 |
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 13***82 | Arm-Mirror | 2 |
321-2461 Conversion Gp-Roading
| 10***16 | Cover-Work Light | 2 |
| 13***82 | Arm-Mirror | 2 |
| 13***83 | Mirror-Convex | 2 |
272-2384 Cover Gp-Platform
| 27***43 | Cover | 2 |
| 27***84 | Cover Group-Platform | 1 |
| 9X***42 | Screw-Truss Head (M6x1.0x12mm); (M6x1.00x12mm) | 6 |
328-9585 Cover Gp-Screed
| 09***22 | Ring-Retaining | 4 |
| 11***33 | Washer; (11x50x6-mm Thk) | 8 |
| 25***67 | Nut; (M20x1.5-Thd) | 4 |
276-4582 Deflector Gp
| 10***31 | Nut-Spring | 8 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 8 |
| 12***80 | Locknut; (M12x1.75-Thd) | 18 |
349-1450 Extension Gp-Main Frame
| 12***09 | Screw-Flat Head; (M10x1.5x20-mm) | 8 |
| 17***11 | Locknut; (M16x2-Thd) | 4 |
| 18***99 | Connector As | 2 |
231-1982 Extension Gp-Main Frame -12-In
| 10***88 | Extension As | 1 |
| 23***82 | Extension Group-Main Frame; -12-In | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
215-7553 Extension Gp-Main Frame
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
231-1983 Extension Gp-Main Frame -24-In
| 10***90 | Extension As | 1 |
| 23***83 | Extension Group-Main Frame; -24-In | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
346-1708 Flashing Gp -Plastic-Manual Fold
| 15***74 | Bolt-Round Head; (M12x1.75x60-mm) | 5 |
| 25***07 | Bolt-Round Head; (M12x1.75x65-mm) | 12 |
| 27***62 | Flashing | 1 |
346-1706 Flashing Gp -Plastic-Hydraulic Fold
| 27***42 | Plate | 2 |
| 28***01 | Screw-Button Head; (M10x1.5x40-mm) | 14 |
| 30***84 | Plate | 1 |
346-1707 Flashing Gp -Belting
| 27***42 | Plate | 2 |
| 28***01 | Screw-Button Head; (M10x1.5x40-mm) | 14 |
| 30***72 | Nut-Weld; (M10x1.5-Thd) | 21 |
346-1709 Flashing Gp -Belting
| 15***74 | Bolt-Round Head; (M12x1.75x60-mm) | 5 |
| 25***07 | Bolt-Round Head; (M12x1.75x65-mm) | 12 |
| 27***48 | Plate | 1 |
338-7260 Frame Gp-Main
| 33***60 | Frame Group-Main | 1 |
| 33***66 | Frame As | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 6 |
295-3080 Frame Gp-Screed
| 19***12 | Plate | 2 |
| 1D***06 | Nut 13.89 mm (.546 In.) | 4 |
| 20***59 | Pin-Lock | 2 |
276-4604 Frame Gp-Screed
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
276-4603 Gate Gp-End
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***47 | Washer | 2 |
| 24***16 | Actuator Group | 4 |
253-4735 Gate Gp-End
| 24***16 | Actuator Group | 4 |
| 25***35 | Gate Group-End | 1 |
| 25***29 | Support As; (Lh) | 1 |
273-9969 Guide Gp-Steering
| 19***54 | Chain | 1 |
| 27***69 | Guide Group-Steering | 1 |
| 27***65 | Bar | 1 |
327-5709 Handrail Gp
| 31***20 | Handrail As; (Rh) | 1 |
| 32***09 | Handrail Group | 1 |
| 33***78 | Handrail As; (Lh) | 1 |
301-1468 Hitch Gp-Oscillating
| 19***08 | Bar | 2 |
| 19***09 | Pin As | 1 |
| 30***68 | Hitch Group-Oscillating | 1 |
343-3000 Hopper Gp -Hydraulic
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 1 |
| 26***33 | Pin As | 1 |
| 27***32 | Plate As | 1 |
345-8116 Hopper Gp
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
| 16***85 | Pin As | 2 |
273-7452 Lines Gp-Grease
| 14***20 | Connector As | 2 |
| 14***85 | Elbow; (45°) | 8 |
| 14***89 | Elbow As | 6 |
263-5961 Lock Gp-Transport
| 25***97 | Bar | 2 |
| 26***61 | Lock Group-Transport | 1 |
| 31***09 | Plate | 2 |
316-1660 Mounting Gp-Ballast
| 31***60 | Mounting Group-Ballast | 1 |
| 31***62 | Plate | 2 |
| 7X***56 | Bolt-Plt; (M16 X 2.0 X 100) | 4 |
328-9579 Plate & Heater Gp-Screed -750-Mm Extension
| 03***57 | Washer; (13x26x6-mm Thk) | 16 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
276-4605 Plate & Heater Gp-Screed -Electric Heat
| 26***54 | Shim; (2-mm Thk) | 4 |
| 27***05 | Plate & Heater Group-Screed; -Electric Heat | 1 |
| 29***23 | Nut-Adjustment; (1-1/4-12-Thd) | 44 |
295-3084 Plate & Heater Gp-Screed -Electric Heat
| 18***31 | Bolt-Special; (1 1/4-12-2athd) | 4 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 21***69 | Stud | 4 |
273-1160 Plate Gp
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 1 |
| 26***33 | Pin As | 1 |
| 27***45 | Bar | 1 |
245-9078 Plate Gp-Screed -Electric Heat, 28-In
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 2 |
311-6561 Plate Gp-Screed -Electric Heat, Main
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***75 | Bracket | 16 |
| 25***44 | Spacer; (14.86x19.05x12.5-mm Thk) | 8 |
308-3131 Plate Gp-Screed -Electric Heat, Extender, Rh
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***37 | Bracket; (Rh) | 8 |
| 25***06 | Plate; (Extender, Rh) | 1 |
295-2942 Plate Gp-Screed
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 13***89 | Clip; (Ladder) | 6 |
| 25***44 | Spacer; (14.86x19.05x12.5-mm Thk) | 4 |
308-3132 Plate Gp-Screed -Electric Heat, Extender, Lh
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***37 | Bracket; (Rh) | 8 |
| 25***13 | Plate; (Lh Extender) | 1 |
245-9077 Plate Gp-Screed -Electric Heat, 12-In
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 1 |
308-3130 Plate Gp-Screed -Electric Heat, Main
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 25***37 | Bracket; (Rh) | 16 |
| 25***01 | Plate-Main | 1 |
302-3944 Step Gp
| 30***44 | Step Group | 1 |
| 32***85 | Step As | 1 |
| 7F***88 | Pin | 2 |
321-2422 Structural Ar
| 26***61 | Lock Group-Transport | 1 |
| 32***22 | Structural Ar | 1 |
| 32***33 | Arm Group-Tow | 1 |
231-1956 Support Gp-Frame
| 10***89 | Brace Group | 1 |
| 23***56 | Support Group-Frame | 1 |
| 23***07 | Bracket Group-Support | 1 |
350-6038 Support Gp-Frame
| 23***07 | Bracket Group-Support | 2 |
| 35***64 | Brace Group | 1 |
| 35***38 | Support Group-Frame | 1 |
322-9331 Suppression Gp-Sound
| 32***31 | Suppression Group-Sound | 1 |
| 32***32 | Insulation-Sound Suppression | 1 |
| 32***33 | Insulation-Sound Suppression | 1 |
321-2436 Ventilation Gp-Paver
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***04 | Housing As-Blower | 1 |
329-8222 Walkway Gp
| 03***69 | Tube | 4 |
| 25***07 | Spacer; (8.4x14x17-mm Thk) | 4 |
| 32***22 | Walkway Group | 1 |
Fuel System
276-0079 Control Gp-Decelerator
| 26***48 | Pedal Group-Governor; -Electronic | 2 |
| 27***36 | Spacer | 2 |
| 27***79 | Control Group-Decelerator | 1 |
201-7654 Cover Gp-Fuel Tank
| 20***53 | Plate | 1 |
| 20***54 | Cover Group-Fuel Tank | 1 |
| 6V***98 | Bolt; (M5x0.8x16-mm) | 5 |
298-5123 Filter Gp-Primary Fuel
| 27***38 | Protection Group-Fuel System; (Line, Low Pressure) | 1 |
| 29***23 | Filter Group-Primary Fuel | 1 |
| 29***29 | Filter-Fuel; (Ultra High Efficiency)(Secondary) | 1 |
174-9570 Filter Gp-Water Sep & Fuel
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
320-0680 Injector Gp-Fuel
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
| 32***80 | Injector Group-Fuel | 1 |
324-9680 Lines Gp-Fuel
| 12***09 | Valve-Ball; (Hydraulic Tank Drain) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***45 | Connector As | 2 |
311-2271 Lines Gp-Fuel Filter
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
| 23***15 | Clip-Pipe | 3 |
333-4782 Pump Gp-Fuel Injection
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 4 |
324-0532 Pump Gp-Fuel Injection
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***72 | Fitting-Fuel | 2 |
| 22***00 | Seal-O-Ring | 3 |
352-6584 Pump Gp-Fuel Injection
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***72 | Fitting-Fuel | 1 |
| 22***00 | Seal-O-Ring | 3 |
212-3657 Pump Gp-Fuel Prm & Water Sep -Electric
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 17***00 | Seal; (Fuel) | 2 |
| 21***57 | Pump Group-Fuel Prm & Water Sep; -Electric-Primary Filter | 1 |
324-9679 Tank Gp-Fuel
| 16***00 | Connector As | 1 |
| 2S***40 | Clamp-Hose To Nipple | 1 |
| 32***79 | Tank Group-Fuel | 1 |
Grade References
109-5628 Leveler Gp -30-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5624 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5625 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 7 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5626 Leveler Gp -Outboard
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5623 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5627 Leveler Gp -40-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5622 Leveler Gp -40-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
Hydraulic System
338-7261 Cover Gp
| 19***64 | Plate | 2 |
| 20***04 | Plate | 2 |
| 23***62 | Plate | 2 |
338-9562 Cover Gp
| 03***06 | Seal (Use As Required) | 1 |
| 16***80 | Plug As. | 1 |
| 20***72 | Plug As | 1 |
334-3260 Cover Gp
| 14***11 | Plug Group | 1 |
| 29***10 | Plate-Cover | 1 |
| 33***60 | Cover Group | 1 |
270-7226 Cylinder & Mtg Gp-Auger
| 14***68 | Elbow Group | 4 |
| 17***51 | Pin-Clevis | 2 |
| 19***59 | Cylinder Group-Hydraulic; -Auger, Rh | 1 |
276-5032 Cylinder & Mtg Gp-Hopper
| 14***68 | Elbow Group | 2 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 2 |
| 27***60 | Cylinder Group-Hydraulic; -Screed Hoist | 2 |
323-8196 Cylinder & Mtg Gp-Hopper
| 10***44 | Elbow | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 20***00 | Elbow As | 2 |
270-7224 Cylinder & Mtg Gp-Screed Hoist
| 14***74 | Elbow As | 2 |
| 16***88 | Elbow; (90-Deg) | 1 |
| 17***51 | Pin-Clevis | 4 |
333-0274 Cylinder & Mtg Gp-Tow Point
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 14***18 | Connector As | 2 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 2 |
268-1692 Cylinder Gp-Hydraulic
| 26***92 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 27***79 | Kit-Seal; (Hydraulic Cylinder) | 1 |
| 2K***71 | Locknut; (1-14-Thd) | 1 |
275-0895 Cylinder Gp-Hydraulic
| 26***92 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 27***95 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 29***49 | Cylinder Group-Hydraulic; -Hopper | 1 |
197-9766 Cylinder Gp-Hydraulic -Slope
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 14***61 | Plug | 2 |
| 14***62 | Seal-Washer | 2 |
194-7259 Cylinder Gp-Hydraulic
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 19***59 | Cylinder Group-Hydraulic; -Auger, Rh | 1 |
| 23***20 | Kit-Plug; (Auger Cylinder) | 1 |
270-3560 Cylinder Gp-Hydraulic
| 25***75 | Ring-Retaining | 1 |
| 27***60 | Cylinder Group-Hydraulic; -Screed Hoist | 1 |
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 1 |
135-0218 Cylinder Gp-Hydraulic -Extender
| 03***39 | Ring-Back-Up | 1 |
| 12***75 | Ring-Wear | 2 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 1 |
194-7260 Cylinder Gp-Hydraulic -Auger, Lh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 19***60 | Cylinder Group-Hydraulic; -Auger, Lh | 1 |
| 23***18 | Kit-Seal; (Auger Cylinder, Lh) | 1 |
292-8449 Cylinder Gp-Hydraulic
| 29***49 | Cylinder Group-Hydraulic; -Hopper | 1 |
325-1854 Drive Gp-Pump
| 14***53 | Hose; (272.2-cm) | 0 |
| 14***12 | Adapter As | 2 |
| 14***52 | Union As | 1 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 17***15 | Filter Group-Oil; -Hydraulic Tank | 1 |
343-3001 Hydraulic Ar
| 32***94 | Valve & Mtg Group-Truck Hitch | 1 |
| 34***99 | Lines Group-Hitch | 1 |
| 34***01 | Hydraulic Ar | 1 |
321-2452 Hydraulic Ar
| 32***52 | Hydraulic Ar | 1 |
| 32***77 | Hydraulic Ar-Conveyor | 1 |
| 32***78 | Hydraulic Ar-Vibratory | 1 |
336-7931 Hydraulic Ar-Auxiliary
| 27***24 | Cylinder & Mtg Group-Screed Hoist | 1 |
| 27***26 | Cylinder & Mtg Group-Auger | 1 |
| 32***92 | Valve & Mtg Group-Control; -Brake Release | 1 |
323-8179 Hydraulic Ar-Fan
| 28***51 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 32***79 | Hydraulic Ar-Fan | 1 |
| 32***50 | Pump & Mtg Group-Hydraulic Fan | 1 |
321-2438 Hydraulic Ar-Tamper
| 32***38 | Hydraulic Ar-Tamper | 1 |
| 32***14 | Lines Group-Tamper | 1 |
| 32***15 | Pump & Mtg Group-Auxiliary | 1 |
323-8178 Hydraulic Ar-Vibratory
| 32***78 | Hydraulic Ar-Vibratory | 1 |
| 32***89 | Valve & Mtg Group-Vibratory | 1 |
| 32***90 | Lines Group-Vibratory | 1 |
324-3243 Lines Gp-Auger
| 10***05 | Plate | 2 |
| 10***45 | Clamp | 4 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
339-8115 Lines Gp-Brake & Shift
| 10***03 | Plate-Cover | 1 |
| 10***05 | Plate | 2 |
| 14***77 | Elbow As. | 2 |
323-8188 Lines Gp-Conveyor
| 10***05 | Plate | 2 |
| 14***75 | Elbow Group | 1 |
| 14***55 | Union As | 2 |
295-3078 Lines Gp-Extender
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***36 | Elbow As. | 2 |
| 16***32 | Pin | 2 |
350-1624 Lines Gp-Extender
| 10***03 | Plate-Cover | 3 |
| 10***05 | Plate | 2 |
| 14***28 | Connector Assem. | 1 |
276-4585 Lines Gp-Extension
| 10***05 | Plate | 1 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 2 |
| 14***27 | Connector Group | 1 |
343-2999 Lines Gp-Hitch
| 10***03 | Plate-Cover | 5 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
| 15***90 | Bolt-Stacking; (M8x1.25x33-mm) | 4 |
343-2998 Lines Gp-Hopper
| 10***36 | Clip | 2 |
| 10***03 | Plate-Cover | 5 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
324-3242 Lines Gp-Hopper
| 31***03 | Hose As | 2 |
| 32***42 | Lines Group-Hopper | 1 |
| 34***20 | Hose As | 2 |
324-3252 Lines Gp-Hydraulic Fan
336-2034 Lines Gp-Pressure Test
339-8150 Lines Gp-Pump -Auxiliary
324-3247 Lines Gp-Return
324-3241 Lines Gp-Screed
324-3248 Lines Gp-Slope
| 10***36 | Clip | 1 |
| 10***05 | Plate | 1 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 1 |
253-4756 Lines Gp-Slope
338-2660 Lines Gp-Steering
| 10***03 | Plate-Cover | 11 |
| 10***05 | Plate | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
325-8414 Lines Gp-Tamper
| 03***06 | Seal (Use As Required) | 1 |
| 12***95 | Elbow | 0 |
| 13***89 | Clip; (Ladder) | 1 |
295-3083 Lines Gp-Vibratory
| 10***05 | Plate | 4 |
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***09 | Adapter As | 3 |
323-8190 Lines Gp-Vibratory
| 10***81 | Hose As | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***66 | Elbow Group | 1 |
276-4584 Lines Gp-Vibratory
| 10***03 | Plate-Cover | 1 |
| 10***05 | Plate | 3 |
| 10***22 | Support As; (Lh) | 1 |
323-8187 Motor & Mtg Gp-Auger
| 10***20 | Seal-O-Ring | 2 |
| 11***80 | Elbow | 1 |
| 14***27 | Connector Group | 4 |
283-0351 Motor & Mtg Gp-Hydraulic Fan
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 2 |
| 14***15 | Connector As | 1 |
| 14***16 | Connector Group | 1 |
338-2668 Motor & Mtg Gp-Propel
| 12***47 | Elbow | 1 |
| 14***28 | Connector Assem. | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
332-6606 Motor & Mtg Gp-Ventilation
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 14***28 | Tee As-Orfs | 1 |
| 15***11 | Elbow | 1 |
266-9833 Motor Gp-Gear -Paver Ventilation
| 26***11 | Kit-Seal; (Paver Ventilation Motor) | 1 |
| 26***33 | Motor Group-Gear; -Paver Ventilation | 1 |
308-2125 Motor Gp-Gear
| 30***25 | Motor Group-Gear; -Vibratory | 1 |
| 31***08 | Kit-Seal | 1 |
190-8789 Motor Gp-Piston
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
269-0530 Motor Gp-Piston -Propel
| 07***53 | Pin; (Spring) | 2 |
| 13***95 | Orifice | 2 |
| 13***57 | Plug | 1 |
230-9384 Motor Gp-Piston -Conveyor
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
294-2887 Motor Gp-Piston
| 13***84 | Nut; (M14x1.5-Thd) | 10 |
| 14***02 | Spring | 9 |
| 14***49 | Bearing | 1 |
325-8415 Pump & Mtg Gp-Auxiliary
| 14***25 | Connector As. | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 32***15 | Pump & Mtg Group-Auxiliary | 1 |
339-8155 Pump & Mtg Gp-Auxiliary
| 10***20 | Seal-O-Ring | 1 |
| 14***45 | Connector As | 1 |
| 14***57 | Elbow As. | 1 |
324-3250 Pump & Mtg Gp-Hydraulic Fan
| 32***50 | Pump & Mtg Group-Hydraulic Fan | 1 |
| 32***06 | Pump Group-Gear; (Hydraulic Fan) | 1 |
| 8T***56 | Bolt-Plt; (M12 X 1.75 X 35) | 2 |
338-2669 Pump & Mtg Gp-Propel
| 10***15 | Elbow Group | 1 |
| 12***88 | Flange-Split | 8 |
| 14***38 | Elbow | 1 |
230-9385 Pump Gp-Piston -Auxiliary
| 00***91 | Cup-Roller Bearing | 1 |
| 07***35 | Kit-Bearing; (Auxiliary Pump) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
269-0533 Pump Gp-Piston
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 12 |
| 26***60 | Dowel | 4 |
| 26***33 | Pump Group-Piston; -Conveyor | 1 |
323-8180 Tank & Mtg Gp-Hydraulic
| 08***56 | 90 Degrees Elbow | 1 |
| 12***57 | Clamp-Hose | 1 |
| 13***74 | Tube As-Drain | 1 |
324-3253 Tank Gp-Hydraulic
| 00***39 | Adapter-Pipe | 1 |
| 03***06 | Seal (Use As Required) | 1 |
| 13***00 | Clip; (Tab) | 2 |
325-9374 Valve & Mtg Gp
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 3 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
343-7765 Valve & Mtg Gp
| 13***89 | Clip; (Ladder) | 1 |
| 14***18 | Connector As | 2 |
| 14***19 | Connector As | 1 |
323-8193 Valve & Mtg Gp-Auxiliary -Cooler
| 10***03 | Manifold; (Forward Return,Rear Return) | 2 |
| 14***81 | Elbow | 1 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 2 |
339-8160 Valve & Mtg Gp-Auxiliary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***78 | Union | 1 |
| 12***47 | Elbow | 1 |
323-8192 Valve & Mtg Gp-Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***16 | Connector Group | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
323-8195 Valve & Mtg Gp-Counterbalance -Hopper Hoist, Tow Point
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 7 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 4 |
332-6607 Valve & Mtg Gp-Flow Control -Ventilation
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 15***43 | Connector As. | 1 |
338-2665 Valve & Mtg Gp-Steering
| 14***91 | Steering Wheel As | 2 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***25 | Connector As. | 3 |
328-2194 Valve & Mtg Gp-Truck Hitch
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***61 | Elbow Group | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
323-8189 Valve & Mtg Gp-Vibratory
| 11***80 | Elbow | 1 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 2 |
| 15***59 | Tee Group | 1 |
270-3549 Valve Gp-Control
| 26***51 | Kit-Solenoid Valve; (Auger Raise, Lower) | 2 |
| 26***26 | Kit-Check Valve; (Apron Fold) | 2 |
| 27***49 | Valve Group-Control; -2-Bank | 1 |
269-0535 Valve Gp-Control
| 22***84 | Coil As; (24-Volt) | 1 |
| 23***82 | Nut-Special | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
230-9160 Valve Gp-Control -Truck Hitch
| 23***82 | Nut-Special | 1 |
| 23***60 | Valve Group-Control; -Truck Hitch | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
292-9094 Valve Gp-Counterbalance -Hopper Hoist, Tow Point
| 26***51 | Kit-Solenoid Valve; (Auger Raise, Lower) | 2 |
| 29***94 | Valve Group-Counterbalance; -Hopper Hoist, Tow Point | 1 |
| 30***43 | Cap, Main Bearing, Main Bearing Cap, Kit-Valve; (Control) | 2 |
332-6609 Valve Gp-Flow Control -Ventilation
| 33***56 | Kit-Seal | 1 |
| 33***09 | Valve Group-Flow Control; -Ventilation | 1 |
| 35***86 | Valve Group-Solenoid; (Ventilation) | 1 |
326-6532 Valve Gp-Flow Divider
| 22***90 | Nut | 1 |
| 22***91 | Seal-O-Ring | 1 |
| 25***57 | Kit-Seal; (Check Valve) | 1 |
336-7936 Valve Gp-Flow Divider -Front Wheel Assist
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 2 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
325-7582 Valve Gp-Solenoid
| 22***80 | Seal-O-Ring | 1 |
| 22***82 | Seal-O-Ring | 1 |
| 22***83 | Nut-Knurl; (1/2-20-Thd) | 1 |
310-8017 Valve Gp-Solenoid
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 31***17 | Valve Group-Solenoid; -Piston Pump | 1 |
| 31***18 | Valve-Servo | 2 |
332-1453 Valve Gp-Solenoid
| 33***53 | Valve Group-Solenoid | 1 |
295-3082 Vibratory Gp
| 00***39 | Adapter-Pipe | 4 |
| 10***95 | Bearing | 4 |
| 10***39 | Key-Square | 4 |
276-4572 Vibratory Gp
| 09***99 | Fitting-Grease; (Hydraulic) | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***33 | Key-Square; (1/4in X 3/4in Lg) | 4 |
Implements
328-9581 Blade & Heater Gp-Tamper -750-Mm Extension
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 27***35 | Clamp | 8 |
| 30***09 | Heater As | 2 |
350-1625 Extension Ar -Power Main Frame Extension
| 34***65 | Valve & Mtg Group; -Main Frame Extension | 1 |
| 34***50 | Extension Group-Main Frame | 1 |
| 35***24 | Lines Group-Extender | 1 |
241-9103 Extension Ar-Auger
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
| 21***53 | Extension Group-Main Frame | 1 |
328-9593 Extension Ar-Screed -Electric Heat, 6.5-M
| 29***33 | Extension Group-Screed; -6.5-M | 1 |
| 32***85 | Cover Group-Screed | 1 |
| 32***92 | Conversion Ar-Screed; -Electric Heat, 750-mm Extension | 1 |
328-9570 Extension Ar-Screed -Electric Heat, 5.5-M
| 29***20 | Extension Group-Screed | 1 |
| 29***44 | Conversion Ar-Screed; -Electric Heat, 250-mm Extension | 1 |
| 30***69 | Wiring Group-Screed Heater; -250-mm Extension, Cover | 1 |
350-6036 Extension Ar-Screed -Electric Heat, 6.5-M
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
350-6037 Extension Ar-Screed -Electric Heat, 7-M
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
339-9631 Extension Ar-Screed -Electric Heat, 5.5-M
| 24***03 | Extension Ar-Auger | 1 |
| 24***18 | Tube As; (1.8-M) | 1 |
| 32***70 | Extension Ar-Screed; -Electric Heat, 5.5-M | 1 |
328-9606 Extension Ar-Screed -Electric Heat, 7-M
| 29***20 | Extension Group-Screed | 1 |
| 29***33 | Extension Group-Screed; -6.5-M | 1 |
| 29***44 | Conversion Ar-Screed; -Electric Heat, 250-mm Extension | 1 |
292-8833 Extension Gp-Screed -6.5-M
| 09***85 | Locknut; (M16x2-Thd) | 4 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 8 |
| 13***82 | Bolt; (M16x2x100-mm) | 4 |
287-0329 Extension Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 28***29 | Extension Group-Screed | 1 |
| 29***74 | Extension Group-Screed | 1 |
291-8020 Extension Gp-Screed
| 09***22 | Ring-Retaining | 2 |
| 09***85 | Locknut; (M16x2-Thd) | 2 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 4 |
282-8505 Extension Gp-Screed -20-Ft, 2-In
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
292-0674 Extension Gp-Screed
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***31 | Bar-Spacer | 1 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
282-8507 Extension Gp-Screed -18-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
282-8504 Extension Gp-Screed -5.3-M
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 21***53 | Extension Group-Main Frame | 1 |
287-0328 Extension Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 28***28 | Extension Group-Screed | 1 |
| 29***73 | Extension Group-Screed | 1 |
350-6034 Extension Gp-Screed -4.9-M
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
282-8506 Extension Gp-Screed -16-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
253-4744 Extension Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
253-4745 Extension Gp-Screed -Electric Heat, 24-In
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
350-6035 Extension Gp-Screed -5.5-M
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
292-0673 Extension Gp-Screed
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
350-6033 Extension Gp-Screed -6.2-M
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
301-1469 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
327-4620 Indicator Gp-Tow Point
| 19***29 | Bolt-Shoulder; (M8x1.25-Thd) | 2 |
| 32***20 | Indicator Group-Tow Point | 1 |
| 33***62 | Rod As | 2 |
275-2449 Roller Ar-Push
| 19***08 | Bar | 2 |
| 19***09 | Pin As | 1 |
| 27***49 | Roller Ar-Push | 1 |
292-0983 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 10***64 | Shaft As | 2 |
| 16***17 | Roller | 2 |
112-1276 Shaft Gp-Drive -Eccentric Weight
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 11***76 | Shaft Group-Drive; -Eccentric Weight | 1 |
| 24***28 | Seal | 1 |
292-4011 Tamper Gp-Screed -Rh
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
292-4010 Tamper Gp-Screed -Lh
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
Lubrication System
329-9440 Filter Gp-Engine Oil
| 10***81 | Bracket | 1 |
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
| 14***88 | Elbow Group | 1 |
332-6608 Lines Gp-Fan Drive
| 14***93 | Elbow Group | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 1 |
| 20***45 | Mount; (Dual Swivel) | 1 |
298-5112 Pump Gp-Engine Oil
| 10***61 | Bolt; (M10x1.50x50-mm) | 5 |
| 22***29 | Pump As-Engine Oil | 1 |
| 29***12 | Pump Group-Engine Oil | 1 |
Machine Arrangement
321-2453 Chassis Ar
| 27***52 | Lines Group-Grease | 1 |
| 27***69 | Guide Group-Steering | 1 |
| 32***53 | Chassis Ar | 1 |
355-7313 Common Ar
| 32***15 | Electrical Ar | 1 |
| 32***19 | Conveyor Ar-Drag & Auger | 1 |
| 32***20 | Installation Ar-Engine | 1 |
321-2450 Common Ar
| 32***15 | Electrical Ar | 1 |
| 32***19 | Conveyor Ar-Drag & Auger | 1 |
| 32***20 | Installation Ar-Engine | 1 |
328-9592 Conversion Ar-Screed -Electric Heat, 750-Mm Extension
| 32***79 | Plate & Heater Group-Screed; -750-mm Extension | 1 |
| 32***81 | Blade & Heater Group-Tamper; -750-mm Extension | 1 |
| 32***91 | Wiring Group-Screed Heater; -750-mm Extension | 1 |
299-7244 Conversion Ar-Screed -Electric Heat, 250-Mm Extension
| 03***57 | Washer; (13x26x6-mm Thk) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
356-4007 Distribution Ar
| 19***79 | Sensor Group-Auger | 1 |
| 27***49 | Roller Ar-Push | 1 |
| 27***34 | Control Group-Thickness; -Lh Thread | 1 |
356-4006 Distribution Ar
| 16***20 | Control Group-Thickness; -Lh Thread | 1 |
| 27***49 | Roller Ar-Push | 1 |
| 28***25 | Lighting Group-Flood | 1 |
356-4005 Distribution Ar
| 16***20 | Control Group-Thickness; -Lh Thread | 1 |
| 27***49 | Roller Ar-Push | 1 |
| 28***25 | Lighting Group-Flood | 1 |
327-4619 Kit-Maintenance
| 10***84 | Relay As; (24-Volt) | 1 |
| 10***87 | Switch As-Toggle; (Screed Raise/Hld/Float) | 1 |
| 11***90 | Fuse; (10 Amp) | 2 |
354-8206 Option Ar-Hopper -Apron Fold
| 34***00 | Hopper Group; -Hydraulic | 1 |
| 34***06 | Flashing Group; -Plastic-Hydraulic Fold | 1 |
| 35***06 | Option Ar-Hopper; -Apron Fold | 1 |
354-8221 Option Ar-Hopper -Manual Fold, Eame
| 27***60 | Plate Group | 1 |
| 34***09 | Flashing Group; -Belting-Manual Fold | 1 |
| 35***21 | Option Ar-Hopper; -Manual Fold, Eame | 1 |
354-8220 Option Ar-Hopper -Manual Fold
| 27***60 | Plate Group | 1 |
| 34***08 | Flashing Group; -Plastic-Manual Fold | 1 |
| 35***20 | Option Ar-Hopper; -Manual Fold | 1 |
354-8207 Option Ar-Hopper -Apron Fold
| 34***00 | Hopper Group; -Hydraulic | 1 |
| 34***07 | Flashing Group; -Belting-Hydraulic Fold | 1 |
| 35***07 | Option Ar-Hopper; -Apron Fold | 1 |
354-8222 Option Ar-Machine
| 27***79 | Control Group-Decelerator | 1 |
| 32***36 | Ventilation Group-Paver | 1 |
| 32***22 | Walkway Group | 1 |
354-8223 Option Ar-Machine
| 27***84 | Cover Group-Platform | 1 |
| 32***36 | Ventilation Group-Paver | 1 |
| 32***22 | Walkway Group | 1 |
354-8226 Option Ar-Machine
| 27***84 | Cover Group-Platform | 1 |
| 32***22 | Walkway Group | 1 |
| 33***60 | Cover Group | 1 |
354-8227 Option Ar-Machine
| 27***79 | Control Group-Decelerator | 1 |
| 33***23 | Canopy Group | 1 |
| 33***60 | Cover Group | 1 |
354-8228 Option Ar-Machine
| 27***84 | Cover Group-Platform | 1 |
| 33***23 | Canopy Group | 1 |
| 33***60 | Cover Group | 1 |
354-8225 Option Ar-Machine
| 27***79 | Control Group-Decelerator | 1 |
| 32***22 | Walkway Group | 1 |
| 33***60 | Cover Group | 1 |
354-8224 Option Ar-Machine
| 27***79 | Control Group-Decelerator | 1 |
| 32***36 | Ventilation Group-Paver | 1 |
| 33***23 | Canopy Group | 1 |
321-2466 Option Ar-Screed
| 32***66 | Option Ar-Screed | 1 |
| 33***62 | Cover Group | 1 |
354-8231 Option Ar-Screed -Vibratory Adapter
| 32***37 | Wiring Group-Screed Heater | 1 |
| 32***66 | Option Ar-Screed | 1 |
| 35***31 | Option Ar-Screed; -Vibratory Adapter | 1 |
354-8233 Option Ar-Screed -Tamper, Viberatory Adptr, Eame
| 32***38 | Hydraulic Ar-Tamper | 1 |
| 32***44 | Wiring Group-Screed Heater | 1 |
| 35***33 | Option Ar-Screed; -Tamper, Viberatory Adptr, Eame | 1 |
354-8232 Option Ar-Screed -Tamper, Vibratory Adapter
| 32***37 | Wiring Group-Screed Heater | 1 |
| 32***38 | Hydraulic Ar-Tamper | 1 |
| 35***32 | Option Ar-Screed; -Tamper, Vibratory Adapter | 1 |
354-8209 Option Ar-Washdown -Ecology Tank, Reel
| 27***57 | Reel Group-Washdown Hose | 1 |
| 32***34 | Washdown Group-Ecology | 1 |
| 35***09 | Option Ar-Washdown; -Ecology Tank, Reel | 1 |
354-8230 Option Ar-Washdown -Diesel, Reel
| 27***57 | Reel Group-Washdown Hose | 1 |
| 32***67 | Washdown Group; -Diesel Fuel | 1 |
| 35***30 | Option Ar-Washdown; -Diesel, Reel | 1 |
354-8208 Option Ar-Washdown -Ecology Tank, Wand
| 27***58 | Lines Group-Spray Down | 1 |
| 32***34 | Washdown Group-Ecology | 1 |
| 35***08 | Option Ar-Washdown; -Ecology Tank, Wand | 1 |
354-8229 Option Ar-Washdown -Diesel
| 27***58 | Lines Group-Spray Down | 1 |
| 32***67 | Washdown Group; -Diesel Fuel | 1 |
| 35***29 | Option Ar-Washdown; -Diesel | 1 |
276-4539 Screed Ar -As3251c
| 27***39 | Screed Ar; -As3251c, U.S. | 1 |
| 27***72 | Vibratory Group | 1 |
| 27***73 | Sloper Group-Power | 1 |
294-0947 Screed Ar
| 25***35 | Gate Group-End | 1 |
| 25***52 | Adjuster Group-Height | 1 |
| 25***56 | Lines Group-Slope | 1 |
Operator Station
330-9923 Canopy Gp
| 03***69 | Tube | 4 |
| 17***55 | Pin | 2 |
| 24***14 | Rod | 2 |
327-5324 Console Gp-Operator
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***87 | Start Switch Assembly; (Key)(Engine) | 1 |
| 12***74 | Cover-Connector; (Wire Router) | 4 |
274-8748 Control Gp-Unprgmed Monitor -Advisor
| 23***00 | Cover-Switch | 1 |
| 23***01 | Cover-Switch | 1 |
| 23***03 | Cover-Switch | 2 |
284-8905 Control Gp-Unprgmed Monitor -Advisor
| 27***48 | Control Group-Unprgmed Monitor; -Advisor | 1 |
| 28***05 | Control Group-Unprgmed Monitor; -Advisor | 1 |
348-3782 Display Gp-Monitor
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 10 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
330-6558 Display Gp-Monitor
| 15***62 | Knob | 2 |
| 2M***19 | Ring-Retaining | 2 |
| 32***46 | Box Group-Control | 1 |
330-6089 Display Gp-Monitor -Unprogrammed
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 14***44 | Plug As-Connector; (70-Pin) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
327-5718 Floor Mat Gp
| 23***39 | Floor Mat | 2 |
| 27***57 | Floor Mat | 1 |
| 27***26 | Floor Mat | 1 |
321-2435 Guard Gp-Vandalism
| 10***14 | Knob | 2 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 2 |
| 15***93 | Screw-Button Head; (M4x0.7x12-mm) | 2 |
250-2297 Meter Gp-Service -White Backlight
| 25***97 | Meter Group-Service; -White Backlight | 1 |
| 4B***43 | Nut,Plain,Hexagon Plate Mtg | 1 |
| 6V***07 | Seal-Rectangular | 1 |
321-2421 Operator Ar
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 32***21 | Operator Ar | 1 |
| 32***35 | Guard Group-Vandalism | 2 |
327-5333 Panel Gp-Control -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
327-5332 Panel Gp-Control -Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
261-7148 Pedal Gp-Governor -Electronic
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
276-4588 Platform Gp-Operator
| 08***97 | Washer; (13x50x6-mm Thk) | 3 |
| 10***38 | Collar | 1 |
| 14***74 | Extension As-Platform | 2 |
332-8951 Platform Gp-Operator -Lh
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 13***64 | Bushing | 2 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
332-8950 Platform Gp-Operator -Rh
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 13***00 | Clip; (Tab) | 4 |
| 13***64 | Bushing | 2 |
295-3087 Platform Gp-Operator
| 11***33 | Washer; (11x50x6-mm Thk) | 2 |
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 2 |
| 19***01 | Bracket | 2 |
199-4298 Seat Gp-Suspension -Vinyl
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 2 |
235-3151 Seat Gp-Suspension -Vinyl
| 19***32 | Kit-Foam Back | 1 |
| 20***36 | Kit-Damper | 1 |
| 20***37 | Kit-Seat; (Indicators) | 1 |
288-3856 Steering Column Gp -Basic
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 16***61 | Nut; (M18x1.5-Thd) | 1 |
| 21***55 | Kit-Tilt Lever; (Steering Column) | 1 |
106-8541 Umbrella Gp
| 10***41 | Umbrella Group; -Bg-225c | 1 |
187-6649 Umbrella Gp
| 18***49 | Umbrella Group; -Ap-650b | 1 |
Power Train
321-2459 Assist Gp-Front Wheel -2-Wheel Drive
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
321-2460 Assist Gp-Front Wheel -4-Wheel Drive
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
343-5939 Drive Ar-Final
| 34***39 | Drive Ar-Final | 1 |
| 34***40 | Drive Group-Final | 1 |
343-5940 Drive Gp-Final
| 16***69 | Adapter; (Str Thd (-6) Orfs/0) | 2 |
| 31***01 | Housing-Planetary | 2 |
| 31***55 | Planetary Group-Final Drive | 2 |
352-2524 Drive Gp-Hydrostatic
| 27***40 | Kit-Seal; (Pump Drive) | 1 |
| 27***41 | Kit-Bearing | 1 |
| 32***90 | Gauge-Sight; (Oil Level) | 1 |
336-7929 Hydraulic Ar-Propel
| 33***29 | Hydraulic Ar-Propel | 1 |
| 33***67 | Lines Group-Propel | 1 |
| 33***68 | Motor & Mtg Group-Propel | 1 |
338-2667 Lines Gp-Propel
| 13***97 | Hose Assem. | 1 |
| 14***38 | Elbow | 1 |
| 14***75 | Elbow Group | 1 |
336-7937 Lines Gp-Propel -Front Wheel Assist
| 08***56 | 90 Degrees Elbow | 1 |
| 10***03 | Plate-Cover | 1 |
| 10***05 | Plate | 3 |
338-2655 Lines Gp-Propel -Front Wheel Assist
| 08***56 | 90 Degrees Elbow | 1 |
| 10***03 | Plate-Cover | 1 |
| 10***05 | Plate | 3 |
340-5456 Wheel & Tire Gp
| 07***95 | Cap, Valve Stem | 1 |
| 07***92 | Valve | 1 |
| 10***35 | Tire; (17.5-R25) | 1 |
340-5455 Wheel & Tire Gp
| 07***95 | Cap, Valve Stem | 1 |
| 07***92 | Valve | 1 |
| 24***26 | Tire; (17.5-R25) | 1 |
321-2439 Wheel Ar
| 32***39 | Wheel Ar | 1 |
| 34***56 | Wheel & Tire Group | 2 |
340-4801 Wheel Ar
| 34***01 | Wheel Ar | 1 |
| 34***55 | Wheel & Tire Group | 2 |
Service Equipment And Supplies
7r-4741 Lines Gp-Spray Down
| 08***77 | Adapter | 1 |
| 1G***70 | Extension-Curve | 1 |
| 1G***79 | Hose As | 1 |
278-0358 Lines Gp-Spray Down
| 27***58 | Lines Group-Spray Down | 1 |
| 28***78 | Connector | 1 |
| 28***79 | Connector As | 1 |
343-3067 Plate & Film Gp -International
| 11***73 | Film-Stripe; (450-cm Each) | 0 |
| 11***75 | Film-Identification; (Barber-Greene)(Barber-Greene) | 3 |
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
276-4609 Plate & Film Gp
| 10***14 | Handle | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***68 | Plate-Serial Number | 1 |
321-2463 Plate & Film Gp -U.S.
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
321-2464 Plate & Film Gp -International
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
333-2711 Plate & Film Gp -U.S.
| 11***73 | Film-Stripe; (450-cm Each) | 0 |
| 11***75 | Film-Identification; (Barber-Greene)(Barber-Greene) | 3 |
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
295-3081 Plate & Film Gp
| 15***79 | Film-Instruction; (Grease)(Instructions) | 8 |
| 16***89 | Tack-Fastener | 4 |
| 18***68 | Plate-Serial Number | 1 |
266-4529 Pump & Motor Gp-Washdown -Water
| 26***29 | Pump & Motor Group-Washdown; -Water-Emulsion-Diesel Fuel | 1 |
| 31***68 | Kit-Diaphragm | 1 |
| 31***69 | Kit-Valve | 1 |
278-0357 Reel Gp-Washdown Hose
| 15***02 | Spacer; (11x20x15-mm Thk) | 2 |
| 19***88 | Clip | 2 |
| 1G***70 | Extension-Curve | 1 |
321-2467 Washdown Gp
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 10***90 | Hose As | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
321-2434 Washdown Gp-Ecology
| 00***14 | Coupling-Pipe | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
Slope And Grade Control
333-1224 Beam Gp-Transverse
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 19***78 | Pad | 2 |
| 2G***67 | Washer; (10.5x60x3-mm Thk) | 7 |
298-0647 Cable Gp-Control
| 10***63 | Clamp | 1 |
| 11***98 | Plug | 1 |
| 11***08 | Bushing | 2 |
298-0648 Cable Gp-Control
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***08 | Bushing | 2 |
337-9988 Control Gp-Grade & Slope -Accugrade
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
330-6083 Control Gp-Grade & Slope -Accugrade
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***33 | Wire; (30-cm) | 0 |
209-3130 Control Gp-Grade & Slope
| 11***10 | Screw-Pan Head | 8 |
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
279-2461 Control Gp-Grade & Slope
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
298-0645 Control Gp-Grade & Slope
| 20***30 | Control Group-Grade & Slope | 1 |
| 23***08 | Link; (6-Pin) | 2 |
| 25***30 | Mount As | 2 |
298-0642 Sensor Gp-Grade
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
357-8491 Sensor Gp-Grade
| 27***73 | Clip | 2 |
| 31***97 | Sensor-Angle; (As200c)(Grade Control) | 1 |
| 33***46 | Cap-Connector | 2 |
282-8520 Sensor Gp-Sonic
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
258-6580 Sensor Gp-Sonic -Averaging Ski
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
348-3783 Sensor Gp-Sonic
| 09***49 | Bolt; (M8x1.25x40-mm) | 4 |
| 13***39 | Screw-Flat Head; (M8x1.25x30-mm) | 4 |
| 27***73 | Clip | 2 |
330-6084 Sensor Gp-Sonic
| 10***49 | Plate | 2 |
| 13***21 | Handle | 4 |
| 14***10 | Collar | 2 |
257-6255 Ski Gp-Averaging
| 25***29 | Mount As | 2 |
| 25***30 | Mount As | 2 |
| 25***55 | Ski Group-Averaging | 1 |
Undercarriage
331-9825 Bogie Gp -Lh
| 00***31 | Cup-Bearing | 4 |
| 00***43 | Nut | 2 |
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
339-8132 Bogie Gp -Lh
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
| 08***52 | Tire; (22x6x17.75) | 1 |
| 08***77 | Plate-Locking | 2 |
339-8131 Bogie Gp -Rh
| 00***31 | Cup-Bearing | 2 |
| 00***43 | Nut | 1 |
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
331-9824 Bogie Gp -2-Wheel Drive
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
339-8133 Bogie Gp -Lh
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
| 08***52 | Tire; (22x6x17.75) | 1 |
| 08***77 | Plate-Locking | 2 |
339-8130 Bogie Gp -Lh
| 00***31 | Cup-Bearing | 2 |
| 00***43 | Nut | 1 |
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
331-9826 Bogie Gp -Rh
| 00***31 | Cup-Bearing | 4 |
| 00***43 | Nut | 2 |
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
AP500E serial number reference
The PIN plate on Cat wheel pavers is mounted on the rear of the machine, below the operator-station steps, riveted to the frame. The plate shows the full 17-character PIN; the first 3 characters are the serial-number prefix that identifies the model/platform, followed by the sequential unit number. Match the 3-character prefix (e.g. JWK) against the AP500E parts manual serial breaks to confirm platform and build range.
| Prefix | Identifies | Notes |
|---|---|---|
| JWK | AP500E wheel asphalt paver, Cat C4.4 engine, base/launch serial range | JWK00001-Up is the documented serial break for the AP-500E wheel asphalt paver in Cat's own parts catalog (model code AP-500E-02), matching the launch-generation C4.4-powered platform introduced around 2010. Confirm exact emissions tier (Tier 3/Stage IIIA era) and build-date range with your dealer. |
Frequently asked questions
What engine does the Caterpillar AP500E use?
The AP500E runs a Cat C4.4 ACERT four-cylinder turbocharged diesel rated at 106 kW (144 metric hp / 142 hp), built to Tier 3/Stage IIIA-equivalent emissions. That is a different tune from the later, non-E bare AP500 update, which uses a higher-output 110 kW (148 hp) C4.4 with DEF/SCR aftertreatment.
What is the operating weight of the Caterpillar AP500E?
Operating weight varies by screed: about 15.3 tonnes (33,700 lb) with the AS2252C screed and about 15.5 tonnes (34,200 lb) with the AS3251C screed. Paver-only shipping weight without a screed is lower. Check the data plate for the exact configuration.
What replaced the Caterpillar AP500E?
Caterpillar replaced the AP500E with a redesigned Tier 4 Final/Stage V paver marketed simply as AP500, using an uprated C4.4 (110 kW / 148 hp) with DEF/SCR aftertreatment and the newer SE47-series screeds. That model was later joined by the AP500F, which added quick-heating electric screed technology.
What AP500E owners discuss
What do techs report about the Cat C4.4 ACERT engine's fuel system behavior on the AP500E?
On the C4.4 common-rail engine used in the AP500E, rough idle or a hard start after the machine has sat is usually traced to a weak fuel lift pump or an intermittent fuel-pressure-sensor signal rather than a worn-out engine. Reported symptoms include white smoke on a cold start and an occasional no-start with no fault code logged. The usual diagnostic path is checking rail pressure on the diagnostic tool, inspecting the fuel pressure sensor wiring and connectors for corrosion, and bleeding air from the system any time the filters or injectors are serviced, since this engine family is sensitive to trapped air after fuel-system work. Have your dealer verify any repair involving the pressurized common-rail fuel lines.
What hydraulic quirks show up on the AP500E's screed and feeder circuits?
The most common complaint on Cat wheel pavers of this generation is screed lift cylinders drifting or lifting unevenly as the packing and seals age, which shows up as the screed settling on its own or not floating cleanly once set down. A rebuild with new seals and a check of the float-mode setting typically resolves it. Leaks at hose fittings on the auger and conveyor drive motors are also common over time, driven by heat and abrasive mix rather than a design fault. Have your dealer verify screed cylinder and hydraulic circuit repairs before returning the machine to paving.
Which wear items show up fastest on the feeder system and screed?
Screed plates wear the fastest of any component since all the mix passes under them; expect to replace a set roughly once or twice a season depending on tonnage run through the machine. Auger flights wear to a point and lose their edge, which shows up as streaking in the finished mat. Feeder floor plates warp from heat and abrasion, conveyor chains sag with hours, and flight-bar wear lets mix work down into the bearing seals, leading to bearing failure if not caught early. These are considered normal wear items on any wheel paver of this class, not a fault specific to one unit.
What steering and undercarriage wear is typical on the AP500E's wheel-drive configuration?
As a wheel-undercarriage paver, the AP500E's steering linkage and tie rods take the wear load rather than track components. Play in the steering, a clunk when turning, or uneven front tire wear point to worn tie-rod ends or loose linkage. Front-wheel-assist and all-wheel-drive bogie sets, used for extra traction pushing trucks or working soft base, see accelerated bearing and seal wear if left engaged on hard, dry surfaces rather than only when needed. Check hub and bearing play along with the tie-rod ends at routine inspections. Have your dealer verify any steering linkage repair before the machine goes back into service.
What electrical or sensor issues come up on this generation of Cat paver, and how are they diagnosed?
Fault codes surface on the Advisor/messenger display using Cat's module-component-failure code structure, which identifies which control module, which component, and what kind of failure (signal erratic, high, low, open circuit, and so on) triggered the alert. Community consensus is that an erratic sensor code more often traces back to chafed wiring shorted to ground or a loose/corroded connector than to an actually failed sensor, so check harness routing near the engine and screed-heat wiring runs before swapping the sensor itself.
How does the AP500E's screed heat system behave, and what fails on it?
The AP500E uses a tractor-mounted generator (rated near 25 kW) to power the screed heating elements, engaging once engine speed reaches roughly 1275 rpm. If one heating element fails, the system compensates so paving can continue through the shift rather than shutting the whole screed heat circuit down; the failed element can be swapped on its own instead of replacing the whole heating string at once. The most frequently reported failure point is corroded or loose element connections and control wiring, not the heating coil itself, so check terminals and connectors first when a section runs cold or uneven.
What should a buyer check on a used AP500E before purchase?
Confirm the serial prefix on the machine's PIN plate against the dealer's parts records to verify the machine is really a wheel-undercarriage AP500E and not its track-mounted BG500E sibling, since both share a parts-catalog document group and the same C4.4 engine. Cross-check logged hours against service records for the engine's oil-change interval to gauge how well it was maintained. Physically inspect screed plates, auger flights, feeder floor plates, and conveyor chains for wear, and check tie-rod and bogie-wheel bearing play on the steering axles. Look at the hopper wings: straight and clean generally means the machine was cared for, bent and stripped of paint suggests otherwise. Check for hydraulic seepage around the screed lift cylinders and feeder/auger drive motors, and pull the fault code history with a Cat diagnostic tool before agreeing on price. Have your dealer verify structural and hydraulic condition before finalizing any purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific AP500E part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.