Caterpillarasphalt paver
Caterpillar AP-800D
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar AP-800D is an 8-foot-class rubber-tired asphalt paver built for medium-production work on industrial sites, parking lots, and urban and rural roads. It runs a Cat 3054C turbocharged diesel rated at roughly 97 kW (130 hp) gross at 2200 rpm, mechanically governed with no ECM or electronic fault codes — the operator reads gauges and warning lamps rather than a diagnostic display. Base chassis operating weight without screed runs in the 12,000-13,600 kg (26,500-30,000 lb) range, with total weight climbing depending on the screed and extension package fitted; verify exact figures against the data plate for your configuration. Standard paving width is about 2.44 m (8 ft), extendable to roughly 4.9 m (16 ft) with the factory extend-a-mat screed option, varying by screed fitted. The AP-800D followed the AP-800/AP-800B (Perkins-powered) and AP-800C (Cat 3054DIT) in the same chassis lineage, and Caterpillar also sold the same platform badged as the Barber-Greene BG-230D. No single model replaced it one-for-one; Cat folded the 8-foot paver niche into its current rubber-tired AP400-AP555 lineup.
Across the AP-800 generations the paving deck - hopper, auger, conveyor, tamper-bar screed - stayed mechanically similar; the real change from generation to generation was the engine, moving from Perkins T4.236 to Cat 3054DIT to Cat 3054C, each in roughly the 100-130 hp class with its own fuel system and turbo arrangement. That continuity means many screed, auger, and conveyor wear parts cross-reference across AP-800B/C/D, while engine-specific parts such as the injection pump, turbocharger, and glow plug harness are unique to the D-series 3054C. In the used and parts market the AP-800D holds steady demand precisely because it predates ECM-based emissions controls: buyers wanting a simple, field-serviceable machine for basic paving work gravitate to it, and its shared-chassis parts commonality with the 800B and 800C keeps used units and salvage parts easier to source than on isolated one-off models.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar AP-800D specifications
Engine
| Engine model | Cat 3054C turbocharged diesel, 4-cylinder direct injection |
| Gross power | 97 kW (130 hp) at 2200 rpm |
| Displacement | 4.41 L (269 cu in) |
| Cylinders | 4, in-line, 105 mm bore x 127 mm stroke |
| Emissions | 3054C family certifies to EPA Tier 2 equivalent / EU Stage II equivalent; not separately confirmed for this exact paver application - verify with dealer for the specific serial range |
Weights
| Operating weight | approx. 13.31 t (29,340 lb) - approximate figure, varies by configuration; confirm against the data plate for your unit |
| Shipping weight | not documented in available sources |
| Ground pressure | not published; rubber-tire wheel paver, ground pressure figures not typically listed for this class |
Dimensions
| Standard paving width (base screed) | 2.44 m (8 ft) |
| Transport length, width, height | not documented specifically for this generation in available sources |
| Wheelbase / ground clearance | not documented specifically for this generation in available sources |
Performance
| Maximum speed | approx. 4.56 km/h (2.8 mph), not separated into travel vs. paving mode in available documentation - confirm with dealer |
| Travel speed (transport) | not documented for this generation in available sources |
| Paving speed | not documented for this generation in available sources |
| Hopper capacity | approx. 5.5 cu m (7.2 cu yd) - approximate figure; confirm with dealer for your configuration |
| Gradeability | not published |
Service capacities (summary)
| Fuel tank | not documented for this machine specifically in available sources |
| Hydraulic system | not documented for this machine specifically in available sources |
| Engine oil | approx. 11-13 L (11.6-13.7 qt), per general 3054C engine factory data - actual machine-installed capacity can vary by application |
| Cooling system | approx. 12-15 L (12.7-15.8 qt), per general 3054C engine factory data - actual machine-installed capacity can vary by application |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
AP-800D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat 3054C turbocharged diesel | approx. 11-13 L (2.9-3.4 US gal), varies by dipstick fill level and installation | Cat DEO (Diesel Engine Oil); SAE 15W-40 for warm climates, SAE 10W-30 for cold-weather start-up, meeting API CH-4 or higher |
| Cooling system | approx. 12-15 L (3.2-4.0 US gal); exact figure not documented for this exact serial range - verify with dealer/OMM | Cat ELC (Extended Life Coolant) or Cat DEAC, mixed per Cat cold-weather protection chart for expected ambient temperature |
| Fuel tank | not documented in accessible sources for this exact model/serial range - verify with dealer/OMM | No. 2-D diesel fuel (or No. 1-D in cold climates); ultra low sulfur diesel per emissions spec |
| Hydraulic system and tank (propulsion, vibrator, screed, auger/conveyor circuits) | not documented in accessible sources for this exact model/serial range - verify with dealer/OMM | Cat HYDO (Hydraulic Oil); Cat TDTO accepted as an alternative per Cat's hydraulic fluid guidance |
| Propel drive / wheel drive compartments | not documented in accessible sources for this exact model/serial range - verify with dealer/OMM | Cat TDTO (Transmission/Drive Train Oil), meeting Cat TO-4 spec |
| Grease points (chassis, screed, linkage) | per grease-point interval, not a fill capacity | Cat multipurpose grease (Cat MPGM), NLGI 2; Cat Extreme Application grease for sustained sub-zero operation |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar AP-800D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
| Every 12,000 h |
|
Servicing the AP-800D beyond the schedule
Predictive Maintenance & Fluid Analysis
Run oil sampling on the 3054C engine oil, hydraulic oil, and coolant every 250 hours. With no ECM or fault codes on this mechanically governed engine, sampling and gauge trends are the main early-warning tools available. Track engine oil for turbocharger and injection-pump wear metals, watch hydraulic oil for traction-pump and wheel-motor wear, and monitor coolant condition to catch head gasket or aftercooler leaks before they force an unplanned shutdown mid-shift.
Corrective & Common Repairs
Expect wear in the mechanical fuel injection pump and injectors, turbocharger bearings, and glow plug circuit on the 3054C. On the paving deck, auger gearbox seals, conveyor chain stretch, and tamper bar bushings are frequent wear points from abrasive mix contact. The hydrostatic wheel-drive motors and screed vibrator hydraulics also wear from contamination - inspect hoses and fittings for heat-related cracking during every corrective visit.
Overhaul & Rebuild Points
Major overhaul work centers on the 3054C's injection pump calibration, turbocharger rebuild, and a full valve lash and injector timing reset. On the deck, rebuild auger gearboxes, replace worn conveyor sprockets and chain, and renew screed extension slides, vibrator shafts, and tamper bar bushings as a set. Rebuild the hydrostatic traction pump and wheel motors together so wear characteristics stay matched across the drive circuit.
Seasonal & Environment Servicing
Before cold-weather paving, check the glow plug circuit and cold-start aid, confirm coolant freeze protection, and switch to a lower-viscosity hydraulic oil for cold ambient starts. In hot weather, clean the aftercooler and radiator cores of asphalt dust and fines more often, and purge hopper, auger, and conveyor buildup every shift so heat-soaked asphalt doesn't seize bearings and chain between mix changeovers.
AP-800D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 119-0073 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 1R-1804 | Filter Element-Wtr Sep & Fuel | Fuel system service | Check fitment → |
| 207-2757 | Seal | Fuel system service | Check fitment → |
| 206-5234 | Filter Element As-Air | Air intake service | Check fitment → |
| 206-5235 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
AP-800D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 110 FMI 03/04 | Engine coolant temperature sensor circuit, voltage above or below normal range | Open or shorted sensor wiring, corroded connector, or failed coolant temperature sensor | Inspect sensor harness and connector for damage or corrosion, verify sensor resistance against spec, replace sensor if out of range |
| CID 100 FMI 03/04 | Engine oil pressure sensor circuit, voltage above or below normal range | Damaged sensor wiring, bad ground, or failed oil pressure sensor/switch | Check wiring and connector at the oil pressure sensor, confirm actual oil pressure with a mechanical gauge before condemning the sensor |
| CID 102 FMI 03/04 | Boost (turbocharger outlet) pressure sensor circuit, voltage above or below normal range | Sensor connector corrosion, pinched or chafed harness, or sensor failure; can also follow a real turbo or intake leak | Inspect intake/turbo plumbing for leaks first, then check sensor wiring and connector, replace sensor if wiring tests good |
| CID 168 FMI 02 | Electrical system (battery) voltage erratic, intermittent, or incorrect | Loose or corroded battery terminals, failing alternator/regulator, or a chafed main harness ground | Load-test the battery and alternator output, clean and tighten all battery and ground connections |
| CID 91 FMI 08 | Throttle position sensor signal abnormal frequency or duty cycle | Worn or misadjusted throttle position sensor, linkage binding, or a damaged sensor connector | Check throttle linkage for free movement, inspect sensor connector, adjust or replace the throttle position sensor per the service manual |
| CID 94 FMI 03/04 | Fuel delivery pressure sensor circuit, voltage above or below normal range | Fuel filter restriction affecting sensed pressure, wiring fault, or failed pressure sensor | Replace the fuel filter and bleed the fuel system, then recheck the sensor circuit before replacing the sensor |
| High coolant temperature warning lamp | Engine coolant temperature has reached the warning threshold | Low coolant level, clogged radiator or debris screen, slipping or failed fan drive, or a stuck thermostat | Shut down safely, check coolant level and radiator core/screen for debris, inspect fan drive and thermostat before restarting |
| Low engine oil pressure warning lamp | Engine oil pressure has dropped below the safe operating threshold | Low oil level, plugged oil filter, worn oil pump, or a failed pressure sensor/switch | Stop the engine immediately, check oil level and condition, verify actual pressure with a mechanical test gauge before restarting |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
AP-800D attachments & work tools
Extendable screed (electric, integrated) - AS-2251
The AS-2251 8 ft (2.4 m) electric-heat extendable screed is the factory-paired unit documented for this tractor, shared across the AP-800D, AP-1000B, AP1055B and AP-655C paver family. Screed extension power and plate heating draw from a tractor-mounted generator and controls rather than the paver's own hydraulic system.
Extend-a-mat mechanical screed (legacy pairing) - 8-16B
Used AP-800D tractors are also commonly found paired with the older 8-16B extend-a-mat screed, an 8 to 16 ft (2.4-4.9 m) working range. This is a mechanical/hydraulic vibratory screed rather than the electric AS-2251, and runs off the paver's own hydraulic extension circuit.
Bolt-on screed strike-off extensions
Beyond the base hydraulic screed throw, bolt-on strike-off extension inserts widen the mat further for extra-wide paving, consistent with this size class of Cat wheel paver. These are mechanical add-ons bolted to the screed end frames, not separately hydraulically actuated.
Auger extensions and end plates
Auger tunnel sections and end plates extend to match whichever screed width is fitted, keeping material feed even across the full mat. They tie into the tractor's existing auger drive; no separate hydraulic kit is documented as required.
Grade and slope control sensors
Sonic ski sensors and averaging beams mount to the screed tow-arm/frame as a factory or dealer-installed option for automatic elevation and cross-slope control, standard practice across this paver class. Sensors tie into the paver's control wiring rather than needing a dedicated hydraulic kit.
Rubber-tire drive and steer configuration
The AP-800D is a wheeled (rubber-tire) paver with front steer tires and rear drive tires; no factory tracked-undercarriage option is documented for this generation. The later tracked AP400/AP455/AP500/AP555 line that succeeded this class is a different undercarriage architecture and its SE47 screeds are not documented as fitting the AP-800D.
Push rollers / material transfer hitch
Bumper-mounted push rollers for windrow pickup from a dump truck or material transfer vehicle are standard equipment on this size class of wheel paver rather than a separately purchased attachment.
Operator station canopy / weather shade
An open-operator's-station paver of this class typically offers a bolt-on canopy or ROPS-mounted sunshade as a dealer-fit option; no enclosed-cab configuration is documented for the AP-800D.
Screed plate heating control
Electric plate heating is integrated with the AS-2251 screed option and powered by the onboard generator rather than a burner or hydraulic heat exchanger. Independent heat-up-time figures specific to the AS-2251 are not documented; treat any such figure from newer screed lines as not applicable to this model.
All AP-800D assemblies by section
Every catalogued assembly group for the Caterpillar AP-800D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
239-3058 Air Cleaner Gp
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 09***96 | Elbow | 1 |
| 14***67 | Clamp; (Hose) | 1 |
204-7034 Air Cleaner Gp -Engine
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
| 20***34 | Air Cleaner Group; -Engine | 1 |
| 20***34 | Filter Element As-Air; (Primary) | 1 |
270-4374 Elbow Gp-Air Inlet
| 11***22 | Bolt; (M8x16-mm) | 8 |
| 11***79 | Gasket | 3 |
| 18***27 | Plate | 3 |
239-3059 Exhaust Gp
| 14***67 | Clamp; (Hose) | 1 |
| 19***58 | Muffler As | 1 |
| 23***59 | Exhaust Group | 1 |
233-9539 Turbocharger Gp
| 10***16 | Bolt; (M6x16-mm) | 2 |
| 14***53 | Stud | 7 |
| 17***38 | Bolt | 8 |
Basic Engine
232-7528 Camshaft Gp
| 1B***36 | Key-Woodruff | 1 |
| 22***67 | Camshaft | 1 |
| 23***28 | Camshaft Group | 1 |
230-9196 Cover Gp-Front Housing
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 21***03 | Washer; (Sealing) | 1 |
269-3101 Cover Gp-Valve Mechanism
| 11***04 | Seal-O-Ring | 1 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 13***88 | Cap-Oil Filler; (Engine) | 1 |
234-0251 Cover Gp-Valve Mechanism
| 11***04 | Seal-O-Ring | 1 |
| 13***88 | Cap-Oil Filler; (Engine) | 1 |
| 15***32 | Seal-O-Ring | 1 |
232-7400 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 0 |
308-4729 Crankshaft Gp
| 21***14 | Gear-Crankshaft; (34-Teeth) | 1 |
| 23***00 | Crankshaft Group | 1 |
| 30***29 | Gear; (Sub For Th3084729), Crankshaft Group, Gear; Planetary, Gear | 1 |
232-7439 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 0 |
308-4728 Cylinder Block Gp
| 20***19 | Bolt; (M8x1.25x16-mm) | 10 |
| 23***49 | Housing As | 1 |
| 23***04 | Cylinder Block Group | 1 |
232-7606 Cylinder Block Gp
| 20***19 | Bolt; (M8x1.25x16-mm) | 10 |
| 23***49 | Housing As | 1 |
| 23***04 | Cylinder Block Group | 1 |
232-7604 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 06***02 | Dowel | 10 |
| 06***06 | Plug | 1 |
232-7519 Cylinder Head Gp
| 06***06 | Plug | 4 |
| 14***79 | Retainer-Valve Spring | 16 |
| 18***82 | Guide-Valve | 8 |
308-4731 Cylinder Head Gp
| 22***01 | Bolt; (M15x1.5x137-mm) | 7 |
| 22***02 | Bolt; (M15x1.5x162-mm) | 3 |
| 23***19 | Cylinder Head Group | 1 |
232-7524 Cylinder Head Gp
| 22***01 | Bolt; (M15x1.5x137-mm) | 7 |
| 22***02 | Bolt; (M15x1.5x162-mm) | 3 |
| 23***19 | Cylinder Head Group | 1 |
230-9699 Drive Gp-Fan
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 13***79 | Pulley-Fan Drive | 1 |
| 23***65 | Spring Extension, Housing As | 1 |
234-9680 Drive Gp-Fan
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 12***97 | V-Belt Set; (Includes 2-Belts)(1283-mm) (Fan Drive) | 1 |
| 13***79 | Pulley-Fan Drive | 1 |
239-3062 Drive Gp-Pump
| 00***42 | Breather; (Generator Oil) | 1 |
| 00***34 | Bearing As-Tapered Roller | 8 |
| 01***24 | Bushing To Supply Port | 1 |
239-3061 Drive Gp-Pump
| 10***53 | Hose As | 1 |
| 1T***17 | Bolt-12 Point Head; (3/8-24x1-In) | 8 |
| 23***61 | Drive Group-Pump | 1 |
245-9831 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 10 |
| 16***89 | Flywheel As | 1 |
223-7825 Housing Gp-Flywheel
| 10***57 | Plate | 1 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 14***76 | Housing-Flywheel | 1 |
308-4764 Housing Gp-Front
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
232-6179 Housing Gp-Front
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
232-3713 Lifting Gp-Engine
| 10***30 | Bolt; (M10x1.5x20-mm) | 4 |
| 22***48 | Plate-Lifting | 1 |
| 23***13 | Lifting Group-Engine | 1 |
144-7882 Mounting Gp-Engine
| 03***34 | Screw | 8 |
| 10***77 | Support As-Engine; (Rh) | 1 |
| 10***78 | Support As-Engine; (Lh) | 1 |
252-6456 Mounting Gp-Engine
| 19***32 | Support-Front; (Lh) | 1 |
| 19***34 | Support-Front; (Rh) | 1 |
| 19***36 | Stud | 8 |
232-2565 Pan Gp-Oil -Engine
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
| 22***04 | Pan As-Oil | 1 |
232-7442 Piston & Rod Gp
| 12***36 | Ring-Retaining | 2 |
| 22***36 | Kit-Piston Ring | 1 |
| 22***37 | Piston As | 4 |
308-4730 Piston & Rod Gp
| 12***36 | Ring-Retaining | 2 |
| 22***36 | Kit-Piston Ring | 1 |
| 22***37 | Piston As | 4 |
225-4317 Plug Gp-Engine
| 22***17 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
232-6204 Plug Gp-Engine
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 23***04 | Plug Group-Engine | 1 |
253-2479 Plug Gp-Engine -Cylinder Block
| 03***63 | Plug | 1 |
| 19***67 | Seal-O-Ring | 1 |
| 23***61 | Plug; (Blanking) | 1 |
230-7353 Pulley Gp-Crankshaft
| 23***53 | Pulley Group-Crankshaft | 1 |
| 6I***01 | Block | 1 |
| 6I***02 | Pulley | 1 |
225-5963 Rocker Arm Gp
| 18***46 | Screw | 2 |
| 22***25 | Lever As | 4 |
| 22***29 | Plug | 2 |
308-4732 Valve Mechanism Gp
| 06***95 | Rod | 8 |
| 13***53 | Tappet | 8 |
| 1B***36 | Key-Woodruff | 1 |
232-7526 Valve Mechanism Gp
| 06***95 | Rod | 8 |
| 13***53 | Tappet | 8 |
| 18***46 | Screw | 2 |
Controls
8i-0257 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 2 |
| 10***04 | Bolt-Shoulder | 2 |
| 10***24 | Tube As; (Vertical) | 4 |
206-6698 Adjuster Gp-Height
| 10***24 | Tube As; (Vertical) | 4 |
| 10***39 | Key-Square | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
102-2703 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 1 |
| 10***47 | Gear-Worm | 1 |
| 10***50 | Guide-Bushing | 1 |
197-9844 Chain Gp-Screed
| 10***87 | Link-Connecting | 1 |
| 19***33 | Link-Offset | 1 |
| 19***44 | Chain Group-Screed | 1 |
197-5288 Crown Gp
| 10***39 | Key-Square | 1 |
| 11***50 | Sprocket; (12-Teeth) | 1 |
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 1 |
120-5898 Crown Gp-Manual
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 05***09 | Bolt-Socket Head | 4 |
| 10***87 | Link-Connecting | 1 |
276-4590 Crown Gp-Manual
| 10***01 | .. Roller, Bearing | 2 |
| 10***38 | Pointer | 1 |
| 10***39 | Key-Square | 1 |
185-4056 Jack Gp-Height Adjuster
| 18***65 | Jack Group-Height Adjuster | 1 |
| 18***56 | Jack Group-Height Adjuster | 1 |
| 1F***50 | Nut Rops Support | 1 |
196-2503 Jack Gp-Height Adjuster
| 10***64 | Bearing-Thrust | 2 |
| 11***49 | Worm | 1 |
| 19***03 | Jack Group-Height Adjuster | 1 |
102-2699 Jack Gp-Sloper
| 10***99 | Jack Group-Sloper | 1 |
| 10***46 | Gear-Worm | 1 |
| 10***49 | Guide-Bushing | 1 |
277-2004 Motor Gp-Power Adjuster
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
197-9850 Shaft Gp-Drive -Front
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***12 | Spindle As | 1 |
282-7961 Shaft Gp-Drive -Non-Actuated
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 28***61 | Shaft Group-Drive; -Non-Actuated | 1 |
197-9849 Shaft Gp-Drive -Rear
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***45 | Spindle As | 1 |
8i-0213 Sloper Gp-Manual
| 06***93 | Lockwasher-Bearing | 2 |
| 10***99 | Jack Group-Sloper | 2 |
| 10***00 | . Axle, Rod End | 2 |
Cooling System
231-0038 Connection Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 1 |
| 22***07 | Connection As | 1 |
| 22***08 | Regulator-Water Temperature | 1 |
296-5616 Cooler Gp-Engine Oil
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 22***17 | Cooler-Oil; (Engine) | 1 |
| 22***18 | Seal | 2 |
232-3722 Cooler Gp-Engine Oil
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 22***17 | Cooler-Oil; (Engine) | 1 |
| 22***18 | Seal | 2 |
238-2799 Cooler Gp-Fltr Base & Eng Oil
| 22***41 | Plug | 1 |
| 22***44 | Gasket; (Engine Oil Filter Base) | 2 |
| 23***51 | Plate; (Blanking) | 1 |
230-7355 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 2 |
| 22***38 | Seal-O-Ring | 1 |
239-3071 Radiator & Hyd Oil Cooler Gp
| 21***74 | Cap-Pressure; (16-Psi)(Radiator) | 1 |
| 21***14 | Spacer; (8.2x18x7-mm Thk) | 2 |
| 22***13 | Aftercooler As-Air | 1 |
239-3060 Radiator & Hyd Oil Cooler Gp
| 06***86 | Connector | 2 |
| 10***43 | Mount-Flexible | 2 |
| 17***31 | Guard As-Fan | 2 |
239-3082 Recovery Gp-Coolant
| 03***48 | Clip; (11.11mm .437in Id) | 4 |
| 14***11 | Cap-Vented; (Coolant Recovery) | 1 |
| 14***94 | Recovery Group-Coolant | 1 |
Electrical And Starting System
233-9533 Alternator Gp-Charging
| 06***66 | Washer | 1 |
| 10***51 | Bolt; (M8x1.25x130-mm) | 1 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 1 |
243-0642 Battery & Wiring Gp
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 03***73 | Bolt; (3/8-16x1.5-In) | 2 |
| 03***25 | Terminal-Ring; (For 3/8" Fastener) | 1 |
244-3348 Box Gp-Junction
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 4 |
| 10***23 | Board-Control | 2 |
122-9309 Buffer Gp-Sensor -5000-Hz Pwm
| 12***09 | Buffer Group-Sensor; -5000-Hz Pwm-Conveyor Speed | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
122-9303 Buffer Gp-Sensor -Material Height
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
240-5535 Converter Gp-Electrical
| 24***35 | Converter Group-Electrical | 1 |
| 30***83 | Resistor As; (24-Volt) | 1 |
232-0728 Cover Gp-Wiring Harness
| 23***28 | Cover Group-Wiring Harness | 1 |
| 24***28 | Link; (Plastic) | 18 |
| 24***29 | Kit-Bracket; (Wiring Harness Cover) | 1 |
164-7360 Cover Gp-Wiring Harness
| 16***60 | Cover Group-Wiring Harness | 1 |
| 17***96 | Bracket-Mounting | 1 |
| 17***97 | Flange | 1 |
239-3049 Electrical Ar
| 15***27 | Horn Group-Electric | 1 |
| 23***49 | Electrical Ar | 1 |
| 24***42 | Battery & Wiring Group | 1 |
234-5077 Generator & Mtg Gp-Hydraulic
| 11***33 | Washer; (11x50x6-mm Thk) | 4 |
| 1M***43 | Grommet | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
240-6775 Generator Ar
| 23***77 | Generator & Mtg Group-Hydraulic | 1 |
| 23***36 | Cover Group-Generator | 1 |
| 24***75 | Generator Ar | 1 |
231-1332 Generator Gp
| 23***32 | Generator Group | 1 |
233-9834 Glow Plug Gp
| 22***70 | Glow Plug; (24-Volt)(12-Volt) | 4 |
| 23***26 | Clip | 1 |
| 23***34 | Glow Plug Group | 1 |
243-0645 Installation Gp-Controls
| 11***03 | Harness As-Switch; (Parking Brake) | 1 |
| 11***90 | Plate | 1 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 12 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
162-3294 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
148-7260 Lamp Gp-Warning Beacon
| 03***14 | Screw; (10-32x1-In) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
246-2110 Lighting Gp-Flood
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***99 | Harness As-Lighting; (Floodlights)(Rear) | 2 |
| 11***17 | Plate | 2 |
160-7395 Module Gp-Timer
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 16***95 | Module Group-Timer; -Governor Control | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
170-7071 Motor Gp-Electric -Fuel Transfer Pump
| 09***47 | Brush As | 1 |
| 11***94 | Bell; (Rear) | 1 |
| 11***61 | Bearing | 2 |
244-3314 Panel Gp-Control
| 01***80 | Lockwasher | 2 |
| 06***08 | Locknut; (1-11-1/4-Thd) | 1 |
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
232-6362 Panel Gp-Power -Generator
| 19***06 | Strip-Terminal | 1 |
| 19***80 | Circuit Breaker As; (20-Ampere)(240-Volt Receptacle) | 2 |
| 19***75 | Receptacle | 2 |
306-7612 Panel Gp-Power
| 19***06 | Strip-Terminal | 1 |
| 19***80 | Circuit Breaker As; (20-Ampere)(240-Volt Receptacle) | 1 |
| 19***75 | Receptacle | 2 |
225-5977 Resistor As
| 12***82 | Connector-Receptacle | 1 |
| 22***77 | Resistor As | 1 |
| 5P***23 | Wire 4.55m (Br/Bk2); (1-Conn. Ether Starting System Sending Unit / 1-Conn. Solenoid Valve Ether Start System) | 0 |
106-9703 Sensor Gp-Auger
| 10***28 | Clamp | 2 |
| 10***03 | Sensor Group-Auger | 1 |
| 10***66 | Sensor As-Sonic; (Mat'L Flow) | 2 |
104-6600 Sensor Gp-Auger
| 10***00 | Sensor Group-Auger | 1 |
| 10***91 | Support As | 2 |
| 10***92 | Sensor Group-Position; -Auger | 2 |
168-3551 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***51 | Sensor Group-Position; -Steering | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
109-0192 Sensor Gp-Position -Auger
| 10***92 | Sensor Group-Position; -Auger | 1 |
| 15***54 | Cable | 1 |
| 3H***94 | Setscrew-Socket | 2 |
214-4863 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
| 21***63 | Sensor Group-Position; -Rotary-Tc Impeller Clutch, Lh Pedal | 1 |
284-8876 Sensor Gp-Position
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 28***76 | Sensor Group-Position | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
109-0174 Sensor Gp-Position -Grade
| 10***74 | Sensor Group-Position; -Grade | 1 |
| 15***83 | Arm As-Grade Sensor | 1 |
| 15***87 | Shoe As | 1 |
160-7396 Solenoid Gp-Throttle -Governor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***96 | Solenoid Group-Throttle; -Governor | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
230-7304 Starting Motor Gp-Electric
| 22***50 | Starting Motor Group-Electric | 1 |
| 23***04 | Starting Motor Group-Electric | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
172-8660 Switch Gp-Liquid Level -Hydraulic Tank
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
241-8368 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
254-3783 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
167-0138 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
248-4064 Wiring Gp-Engine
| 11***18 | Clip | 3 |
| 13***89 | Clip; (Ladder) | 4 |
| 17***15 | Strap; (Dual Clamp) | 2 |
243-0644 Wiring Gp-Hydraulic Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***85 | Connector; (4-Pole) | 2 |
| 10***51 | Plug | 1 |
232-6366 Wiring Gp-Hydraulic Generator
| 19***81 | Circuit Breaker As; (35-Ampere)(Generator) | 1 |
| 1M***43 | Grommet | 2 |
| 1S***94 | Clip-R.H. Side Engine Support | 2 |
251-1695 Wiring Gp-Screed
| 25***95 | Wiring Group-Screed | 1 |
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 4 |
| 30***42 | Flange, Harness As-Screed; (Electric Heat), Oil Cooler, . Flange, Flange; (Sub For At251127) | 1 |
244-4976 Wiring Gp-Screed -Electric Heat
| 17***65 | Plug As-Connector | 1 |
| 19***96 | Panel Group-Electronic; -Material Height, Rh | 1 |
| 19***97 | Panel Group-Electronic; -Material Height | 1 |
243-1843 Wiring Gp-Screed -Electric Heat
| 17***65 | Plug As-Connector | 1 |
| 19***97 | Panel Group-Electronic; -Material Height | 2 |
| 23***35 | Handrail As; (Lh) | 1 |
Electrical System
196-1296 Panel Gp-Electronic -Material Height, Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***83 | Relay-Time Delay; (Electric Heat) | 1 |
196-1297 Panel Gp-Electronic -Material Height
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 19***97 | Panel Group-Electronic; -Material Height | 1 |
Engine Arrangement
304-7046 Engine Ar
| 29***47 | Engine Ar-Primary | 1 |
| 30***46 | Engine Ar | 1 |
239-3052 Engine Ar
| 14***82 | Mounting Group-Engine | 1 |
| 23***52 | Engine Ar | 1 |
| 23***56 | Engine Ar | 1 |
304-6910 Engine Ar
| 29***55 | Bulb,C5w, 24v, 5w; Washer - Starting Jaw, Bulb,C5w, 24v, 5w; 24v 5w, Bulb,C5w, 24v, 5w, Engine Ar-Primary, Bulb,C5w, 24v, 5w; C5w, 24v, 5w | 1 |
| 30***10 | Hose; Air, Engine Ar | 1 |
304-6909 Engine Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***80 | Sensor As-Speed; (Engine) | 1 |
239-3056 Engine Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***80 | Sensor As-Speed; (Engine) | 1 |
297-4047 Engine Ar-Primary
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
| 23***04 | Starting Motor Group-Electric | 1 |
177-9752 Engine Ar-Primary
| 17***52 | Engine Ar-Primary | 1 |
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
297-4055 Engine Ar-Primary
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
| 23***04 | Starting Motor Group-Electric | 1 |
304-6915 Installation Ar-Engine
| 14***82 | Mounting Group-Engine | 1 |
| 23***58 | Air Cleaner Group | 1 |
| 23***59 | Exhaust Group | 1 |
Feeder Drag And Auger Conveyors
102-6331 Actuator Gp-Power
| 10***31 | Actuator Group-Power; -Custom | 1 |
| 11***29 | Kit-Seal; (Power Actuator) | 1 |
| 11***81 | Kit-Gear; (Power Actuator) | 1 |
201-5584 Bearing Gp-Auger
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
| 20***84 | Bearing Group-Auger | 1 |
116-9509 Bearing Gp-Auger
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***09 | Bearing Group-Auger | 1 |
106-9718 Bearing Gp-Auger
| 01***41 | Setscrew-Socket | 3 |
| 10***18 | Bearing Group-Auger | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
106-9688 Bearing Gp-Auger
| 10***11 | Fitting | 1 |
| 10***88 | Bearing Group-Auger | 1 |
| 10***18 | Bearing Group-Auger | 1 |
280-9924 Chain Gp-Conveyor
| 28***24 | Chain Group-Conveyor | 1 |
| 28***79 | Bar-Side | 224 |
| 28***80 | Foam Insulation; 40 X 60 X 644 mm, Bar-Side | 112 |
108-0339 Chain Gp-Conveyor
| 10***39 | Chain Group-Conveyor | 1 |
| 8I***54 | Chain Group-Conveyor | 2 |
8i-0854 Chain Gp-Conveyor
| 8I***14 | Bar-Side | 56 |
| 8I***15 | Bar-Side | 28 |
| 8I***16 | Bar-Side | 112 |
103-4783 Conveyor Ar-Drag & Auger
| 10***83 | Conveyor Ar-Drag & Auger | 1 |
| 12***02 | Footshaft Group | 2 |
| 22***30 | Shaft Group-Feeder Drive | 2 |
228-9064 Conveyor Gp-Auger
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 2 |
| 06***66 | Bolt; (3/4-10x1.642-In) | 6 |
| 10***55 | Plate | 1 |
8i-0822 Conveyor Gp-Drag
| 05***20 | Pin-Spring | 56 |
| 10***39 | Chain Group-Conveyor | 1 |
| 12***46 | Bar-Feeder | 28 |
8i-0852 Drive Gp-Conveyor -Drag Conveyor
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 08***43 | Gear-Cluster | 3 |
8i-0866 Drive Gp-Conveyor -Auger
| 08***44 | Gear-Input | 1 |
| 08***83 | Washer; (Thrust) | 1 |
| 09***78 | Pin-Spring | 3 |
5e-9808 Extension Gp-Auger -1-Ft, Lh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 34***65 | Segment-Half Auger; (Lh) | 1 |
5e-9825 Extension Gp-Auger -2-Ft, Lh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 5E***25 | Extension Group-Auger; -2-Ft, Lh | 1 |
5e-9809 Extension Gp-Auger -1-Ft, Rh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 34***64 | Segment-Half Auger; (Rh) | 1 |
5e-9826 Extension Gp-Auger -2-Ft, Rh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 34***64 | Segment-Half Auger; (Rh) | 3 |
1g-9347 Extension Gp-Auger -6 In
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 1G***48 | Tube | 2 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 2 |
122-0702 Footshaft Gp
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
253-1411 Gate Gp-Feeder
| 10***31 | Actuator Group-Power; -Custom | 2 |
| 10***32 | Gate As | 2 |
| 11***33 | Pin | 2 |
8i-0861 Guard Gp-Feeder
| 03***82 | Screw; (3/8-16x2-In) | 16 |
| 13***59 | Bar | 4 |
| 15***80 | Guard As; (Left Front)(Right Rear) | 2 |
104-6594 Lines Gp-Lubrication
| 10***94 | Lines Group-Lubrication | 1 |
| 10***09 | Tube As | 1 |
| 10***10 | Tube As | 1 |
228-4130 Shaft Gp-Feeder Drive
| 03***21 | Bolt-Allen Hd; (3/8unc X 1) | 4 |
| 10***30 | Bearing-Flange | 1 |
| 10***70 | Key-Square | 1 |
Frame And Body
221-4345 Arm Gp-Drop
| 11***99 | Pin As-Pivot | 2 |
| 13***20 | Shaft | 2 |
| 13***77 | Lockout | 2 |
253-1002 Arm Gp-Drop
| 10***68 | Nipple-Pipe | 2 |
| 11***99 | Pin As-Pivot | 2 |
| 25***02 | Arm Group-Drop | 1 |
123-2262 Arm Gp-Tow
| 03***83 | Spacer | 16 |
| 03***53 | Ring-Retaining | 2 |
| 05***74 | Pin | 2 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
109-2722 Bracket Gp-Support
| 06***66 | Bolt; (3/4-10x1.642-In) | 2 |
| 10***22 | Bracket Group-Support | 1 |
| 11***52 | Plate | 1 |
206-6689 Carriage Gp-Extender
| 18***25 | Scraper; (Brass) | 4 |
| 19***57 | Scraper As | 4 |
| 1A***68 | Nut | 6 |
239-3073 Cover Gp-Access
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 17 |
| 03***73 | Bolt; (3/8-16x1.5-In) | 10 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
240-6778 Cover Gp-Access
| 03***72 | Bolt; (3/8-16-Thd) | 4 |
| 24***78 | Cover Group-Access | 1 |
| 24***15 | Panel As | 1 |
240-6781 Cover Gp-Access -Without Ventilation
| 14***60 | Plate | 1 |
| 24***81 | Cover Group-Access; -Without Ventilation | 1 |
| 24***11 | Panel As | 1 |
240-6779 Cover Gp-Access
| 10***56 | Rod; (Prop) | 1 |
| 24***79 | Cover Group-Access | 1 |
| 24***07 | Panel As | 1 |
240-6780 Cover Gp-Access -With Ventilation
| 24***80 | Cover Group-Access; -With Ventilation | 1 |
| 24***09 | Panel As | 1 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 6 |
234-9236 Cover Gp-Generator
| 10***68 | Grip-Handle | 2 |
| 10***24 | Bar | 1 |
| 15***39 | Nut-Weld; (M6x1-Thd)(M6x1-6h Thd) | 4 |
206-6699 Deflector Gp
| 16***24 | Rod-Threaded | 4 |
| 16***25 | Rod-Threaded | 4 |
| 16***26 | Turnbuckle | 4 |
8i-0291 Deflector Gp
| 10***31 | Nut-Spring | 8 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 8 |
| 10***82 | Scale; (Rh)(Screed Ext) | 1 |
106-9715 Extension Gp-Main Frame -2 Ft
| 10***15 | Extension Group-Main Frame; -2 Ft | 1 |
| 10***90 | Extension As | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 3 |
215-7553 Extension Gp-Main Frame
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
106-9714 Extension Gp-Main Frame -1 Ft
| 10***14 | Extension Group-Main Frame; -1 Ft | 1 |
| 10***88 | Extension As | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 3 |
186-3637 Extension Gp-Main Frame
| 12***78 | Bar | 2 |
| 12***20 | Shim; (1.65-mm Thk) | 4 |
| 12***63 | Extension As-Main Frame | 2 |
120-5906 Frame Gp-Screed
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
206-6690 Frame Gp-Screed
| 10***68 | Grip-Handle | 2 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 6 |
| 10***82 | Scale; (Rh)(Screed Ext) | 1 |
287-6598 Frame Gp-Screed
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
216-6989 Gate Gp-End
| 10***68 | Grip-Handle | 2 |
| 10***35 | Support As | 2 |
| 10***09 | Chain; (14-In Each) | 0 |
145-9438 Gate Gp-End
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***68 | Grip-Handle | 2 |
| 10***70 | Support As | 2 |
168-0232 Guard Gp-Deflector
| 16***99 | Guard; (Lh) | 1 |
| 16***00 | Guard; (Rh) | 1 |
| 16***09 | Deflector | 1 |
104-6579 Guide Gp-Steering
| 03***74 | Keeper | 1 |
| 10***79 | Guide Group-Steering | 1 |
| 10***39 | Tube As | 1 |
172-3960 Hopper Gp
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 10***53 | Plate | 1 |
| 10***54 | Plate | 1 |
240-6790 Installation Ar-Platform Cover
| 23***83 | Ventilation Group-Paver | 1 |
| 24***80 | Cover Group-Access; -With Ventilation | 1 |
| 24***90 | Installation Ar-Platform Cover | 1 |
245-3291 Installation Ar-Platform Cover -Without Generator
| 23***17 | Mounting Group-Pump | 1 |
| 24***79 | Cover Group-Access | 1 |
| 24***91 | Installation Ar-Platform Cover; -Without Generator | 1 |
245-9077 Plate Gp-Screed -Electric Heat, 12-In
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 1 |
245-9080 Plate Gp-Screed -Electric Heat, 24-In
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 2 |
245-9079 Plate Gp-Screed -Electric Heat, 12-In
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 1 |
245-9078 Plate Gp-Screed -Electric Heat, 28-In
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 2 |
118-7295 Step Gp
| 11***15 | Step As | 1 |
| 11***34 | Bracket As; (Rh) | 1 |
| 11***03 | Bracket As; (Lh) | 1 |
239-3051 Structural Ar
| 10***79 | Guide Group-Steering | 1 |
| 11***65 | Beam Group-Transverse | 1 |
| 12***73 | Support Group-Tow Arm | 1 |
169-5471 Support Gp-Frame
| 10***89 | Brace Group | 1 |
| 10***22 | Bracket Group-Support | 1 |
| 16***71 | Support Group-Frame | 1 |
121-6173 Support Gp-Tow Arm
| 06***35 | Lock Pin | 2 |
| 10***42 | Bar | 1 |
| 12***73 | Support Group-Tow Arm | 1 |
239-3083 Ventilation Gp-Paver
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***57 | Plate | 1 |
Fuel System
164-4858 Cap Gp-Fuel Filler -Extreme Service, Lockable
| 16***58 | Cap Group-Fuel Filler; -Extreme Service, Lockable | 1 |
| 19***75 | Cover As-Filter; (Fuel Cap) | 1 |
| 9X***00 | Seal-O-Ring | 1 |
247-4132 Governor Gp
| 11***18 | Clip | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 16***96 | Solenoid Group-Throttle; -Governor | 1 |
8l-3471 Joint As-Tube
| 8L***71 | Joint As-Tube | 1 |
| 9X***36 | Seal | 2 |
239-3057 Lines Gp-Fuel
| 10***03 | Plate-Cover | 1 |
| 10***53 | Hose As | 1 |
| 10***04 | Pipe | 1 |
256-3021 Lines Gp-Fuel
| 10***09 | Cap As-Filler; (Fast Fill Fuel) | 1 |
| 10***03 | Plate-Cover | 1 |
| 10***04 | Pipe | 1 |
192-4302 Pump Gp-Fuel
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
| 13***76 | Strainer; (Fuel Pump) | 1 |
233-9526 Pump Gp-Fuel Injection
| 03***17 | Union | 1 |
| 06***64 | Fitting-Flared | 1 |
| 06***65 | Fitting-Brass | 1 |
284-4999 Pump Gp-Fuel Injection
| 14***45 | Valve Group-Solenoid; (24-Volt)(Fuel Shutoff) | 1 |
| 15***68 | Seal-O-Ring | 1 |
| 28***99 | Pump Group-Fuel Injection | 1 |
248-2367 Pump Gp-Fuel Injection
| 14***45 | Valve Group-Solenoid; (24-Volt)(Fuel Shutoff) | 1 |
| 15***68 | Seal-O-Ring | 1 |
| 24***67 | Pump Group-Fuel Injection | 1 |
236-6910 Pump Gp-Fuel Injection
| 14***45 | Valve Group-Solenoid; (24-Volt)(Fuel Shutoff) | 1 |
| 15***68 | Seal-O-Ring | 1 |
| 23***10 | Pump Group-Fuel Injection | 1 |
308-4733 Pump Gp-Fuel Injection
| 03***17 | Union | 1 |
| 06***64 | Fitting-Flared | 1 |
| 06***65 | Fitting-Brass | 1 |
299-9265 Pump Gp-Fuel Prm & Prim Filter
| 1R***04 | Filter Element-Wtr Sep & Fuel | 1 |
| 20***57 | Seal; (Fuel Filter) | 1 |
| 22***14 | Bowl As | 1 |
233-9417 Pump Gp-Fuel Prm & Prim Filter
| 12***72 | Bolt | 3 |
| 21***08 | Fitting; (Quick Disconnect, Male) | 1 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
270-6992 Pump Gp-Fuel Prm & Prim Filter
| 1R***04 | Filter Element-Wtr Sep & Fuel | 1 |
| 20***57 | Seal; (Fuel Filter) | 1 |
| 22***14 | Bowl As | 1 |
149-5380 Pump Gp-Fuel Transfer
| 08***68 | Spacer | 1 |
| 14***80 | Pump Group-Fuel Transfer | 1 |
| 17***71 | Motor Group-Electric; -Fuel Transfer Pump | 1 |
Grade References
200-0738 Gauge Gp-Indicator -Tow Point
| 17***32 | Film-Identification; (Tow Point Indicator) | 2 |
| 20***38 | Gauge Group-Indicator; -Tow Point | 1 |
| 20***40 | Plate | 2 |
109-5622 Leveler Gp -40 Ft Outboard
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5625 Leveler Gp -30 Ft Over Screed
| 08***09 | Bracket | 7 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5624 Leveler Gp -30 Ft Over Screed
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5628 Leveler Gp -30 Ft Grade
| 10***04 | Tube; (1.1-M) | 1 |
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5623 Leveler Gp -30 Ft Outboard
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5626 Leveler Gp -Outboard
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5627 Leveler Gp -40 Ft Grade
| 10***04 | Tube; (1.1-M) | 1 |
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
Hydraulic System
077-3951 Cap Gp-Hydraulic Oil Filler
| 07***51 | Cap As-Filler Breather | 1 |
| 07***32 | Filter Element-Breather; (Hydraulic Oil Filter) | 1 |
| 07***26 | Gasket | 2 |
8c-8002 Cylinder Gp-Hydraulic -Steering
| 03***31 | Ring-Back-Up | 2 |
| 1H***28 | Seal 6.3 cm(2.484 In.) I.D.; Seal--To Seal Pumps To Case | 1 |
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 1 |
203-4273 Cylinder Gp-Hydraulic -Screed Hoist
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 20***73 | Cylinder Group-Hydraulic; -Screed Hoist | 1 |
| 23***05 | Kit-Seal; (Screed Hoist Cylinder) | 1 |
203-4276 Cylinder Gp-Hydraulic -Auger Hoist, Lh
| 20***76 | Cylinder Group-Hydraulic; -Auger Hoist, Lh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 25***75 | Kit-Seal; (Auger Hoist) | 1 |
203-4275 Cylinder Gp-Hydraulic -Auger Hoist, Rh
| 20***75 | Cylinder Group-Hydraulic; -Auger Hoist, Rh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 24***14 | Kit-Seal; (Auger Hoist) | 1 |
206-6682 Cylinder Gp-Hydraulic -Extender
| 20***62 | Kit-Seal; (Extender Cylinder) | 0 |
| 20***82 | Cylinder Group-Hydraulic; -Extender | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
135-0218 Cylinder Gp-Hydraulic -Extender
| 03***39 | Ring-Back-Up | 1 |
| 12***75 | Ring-Wear | 2 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 1 |
278-0617 Cylinder Gp-Hydraulic
| 20***62 | Kit-Seal; (Extender Cylinder) | 1 |
| 27***17 | Cylinder Group-Hydraulic | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
135-0220 Cylinder Gp-Hydraulic -Hopper
| 13***20 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 13***21 | Kit-Seal; (Hopper Cylinder) | 1 |
| 5E***32 | Ring | 1 |
135-9444 Cylinder Gp-Hydraulic -Tow Point
| 13***44 | Cylinder Group-Hydraulic; -Tow Point | 1 |
| 17***34 | Kit-Seal; (Towpoint Cylinder) | 1 |
| 17***36 | Ring-Wear | 1 |
197-9766 Cylinder Gp-Hydraulic -Slope
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 14***61 | Plug | 2 |
| 14***62 | Seal-Washer | 2 |
7x-5312 Filter Gp-Oil -Hydraulic
| 14***91 | Filter-Oil; (Advanced Efficiency) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 7X***12 | Filter Group-Oil; -Hydraulic | 1 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 17***15 | Filter Group-Oil; -Hydraulic Tank | 1 |
239-3050 Hydraulic Ar
| 10***94 | Lines Group-Lubrication | 1 |
| 10***41 | Tank Group-Hydraulic | 1 |
| 10***58 | Lines Group-Auger | 1 |
108-2158 Lines Gp-Auger
| 10***06 | Pin | 2 |
| 10***79 | Pin | 2 |
| 10***82 | Hose As | 1 |
248-6369 Lines Gp-Conveyor
| 10***38 | Clamp-Half | 10 |
| 10***43 | Plate | 1 |
| 10***42 | Hose As | 1 |
311-4880 Lines Gp-Extender
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***36 | Elbow As. | 2 |
| 16***32 | Pin | 2 |
206-6691 Lines Gp-Extender
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 14***18 | Connector As | 2 |
| 14***74 | Elbow As | 2 |
112-3468 Lines Gp-Extension
| 11***68 | Lines Group-Extension | 1 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 2 |
| 14***65 | Elbow | 2 |
240-6777 Lines Gp-Generator Drive
| 12***19 | Hose As | 1 |
| 12***55 | Elbow As | 1 |
| 13***40 | Hose As | 1 |
239-3079 Lines Gp-Grade & Slope
| 10***02 | Valve Group-Solenoid | 2 |
| 10***02 | Tube As | 2 |
| 10***64 | Tube As | 1 |
239-3081 Lines Gp-Hopper
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 10***01 | Pin As | 2 |
| 10***44 | Elbow | 1 |
239-3080 Lines Gp-Hydraulic Oil Cooler
| 10***10 | Hose As | 1 |
| 14***38 | Elbow | 1 |
| 14***33 | Connector As | 2 |
251-4601 Lines Gp-Paver Ventilation
| 10***39 | Key-Square | 1 |
| 14***49 | Hose As | 1 |
| 14***51 | Valve-Flow Control; (Blower Motor) | 1 |
311-1959 Lines Gp-Slope
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***84 | Pin As | 4 |
| 14***13 | Adapter Group | 1 |
197-5285 Lines Gp-Slope
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***84 | Pin As | 4 |
248-6903 Lines Gp-Steering
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 07***43 | Steering Column Group | 1 |
| 10***49 | Plate | 1 |
133-8685 Lines Gp-Truck Hitch
| 03***82 | Screw; (3/8-16x2-In) | 2 |
| 08***73 | Clamp | 4 |
| 10***02 | Valve Group-Solenoid | 1 |
232-0726 Lines Gp-Vibratory
| 10***05 | Plate | 7 |
| 14***09 | Adapter As | 2 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
112-3466 Lines Gp-Vibratory
| 07***84 | Clamp | 6 |
| 08***86 | Clamp | 2 |
| 10***84 | Hose As | 2 |
250-2989 Motor & Mtg Gp-Generator
| 14***27 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***72 | Elbow Group | 1 |
197-1728 Motor Gp-Gear -Blower Fan
| 16***39 | Shim; (1.75-mm Thk) | 1 |
| 19***28 | Motor Group-Gear; -Blower Fan | 1 |
| 1F***22 | Bearing (.500" Long) | 4 |
8i-0721 Motor Gp-Gerotor -Vibratory
| 06***39 | Seal-O-Ring | 1 |
| 16***21 | Kit-Bearing; (Vibratory Motor) | 1 |
| 4D***86 | Seal--Bushing To Selector Valve Group | 1 |
6r-4097 Motor Gp-Piston -Propel
| 08***37 | Spring | 9 |
| 08***61 | Plate As. | 1 |
| 08***17 | Screw | 12 |
223-0583 Motor Gp-Piston -Auger Conveyor
| 11***21 | Plug-Special | 2 |
| 11***22 | Spring | 2 |
| 12***13 | Gasket-End Cap | 1 |
8i-0788 Motor Gp-Piston -Propel
| 03***20 | Ring | 4 |
| 07***53 | Pin; (Spring) | 4 |
| 10***83 | Bearing | 2 |
227-5104 Motor Gp-Piston -Generator
| 10***78 | Bearing-Roller | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
223-0581 Motor Gp-Piston -Drag Conveyor
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
266-3300 Mounting Gp-Pump
| 22***06 | Mount As | 1 |
| 22***10 | Shaft As | 1 |
| 26***00 | Mounting Group-Pump | 1 |
234-4417 Mounting Gp-Pump
| 03***92 | Seal; (126.59mm Id) | 1 |
| 22***06 | Mount As | 1 |
| 22***10 | Shaft As | 1 |
239-3087 Pump & Lines Gp-Screed
| 10***57 | Connector | 1 |
| 14***23 | Hose As | 1 |
| 14***73 | Elbow Group | 1 |
240-6776 Pump & Mtg Gp-Generator
| 14***16 | Connector Group | 1 |
| 23***90 | Pump Group-Piston; -Generator | 1 |
| 24***76 | Pump & Mtg Group-Generator | 1 |
267-9478 Pump Gp-Gear
| 25***22 | Kit-Gear; (Steering Gear Pump) | 1 |
| 26***78 | Pump Group-Gear | 1 |
| 27***45 | Kit-Seal; (Steering Gear Pump) | 1 |
237-0683 Pump Gp-Gear -Screed
| 22***11 | Kit-Seal | 1 |
| 23***83 | Pump Group-Gear; -Screed | 1 |
| 25***22 | Kit-Gear; (Steering Gear Pump) | 1 |
8i-0988 Pump Gp-Metering
| 03***33 | Bolt | 7 |
| 05***50 | Seal | 3 |
| 07***23 | Seal | 1 |
8i-0838 Pump Gp-Piston -Propel
| 03***04 | Key | 1 |
| 03***05 | Seal-O-Ring | 2 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
143-2872 Pump Gp-Piston -Drag Conveyor, Auger Conveyor
| 07***75 | Shim | 1 |
| 08***98 | Cover-Gerotor | 1 |
| 08***02 | Plug-Orifice | 2 |
8i-0836 Pump Gp-Piston -Auxiliary
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 2 |
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 8 |
| 05***33 | Seal | 1 |
239-1490 Pump Gp-Piston -Generator
| 00***54 | Cup-Roller Bearing | 1 |
| 10***79 | Cone-Bearing | 1 |
| 12***22 | Bolt; (M14x2x50-mm) | 4 |
8i-0839 Pump Gp-Piston -Propel
| 03***04 | Key | 1 |
| 03***05 | Seal-O-Ring | 2 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
9t-2031 Rotating Gp-Pump
| 00***83 | Ring-Snap | 1 |
| 9T***31 | Rotating Group-Pump; -Steering, Pilot | 1 |
| 9T***57 | Pin | 3 |
110-6347 Tank Gp-Hydraulic
| 07***51 | Cap As-Filler Breather | 1 |
| 10***40 | Tank As-Hydraulic | 1 |
| 10***30 | Cover As | 1 |
107-9341 Tank Gp-Hydraulic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***41 | Tank Group-Hydraulic | 1 |
| 10***87 | Hose As | 1 |
250-2990 Valve & Mtg Gp-Control -Generator
| 11***18 | Clip | 1 |
| 14***27 | Connector Group | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 2 |
134-4721 Valve Gp-Bank -Auger Hoist, Screed Hoist
| 08***80 | Case As | 6 |
| 08***83 | Body | 3 |
| 08***85 | Spring | 6 |
190-8803 Valve Gp-Control -Vibratory Bypass
| 19***03 | Valve Group-Control; -Vibratory Bypass | 1 |
| 22***80 | Valve Group-Control; (Vibratory Bypass) | 1 |
| 22***83 | Coil | 1 |
227-5105 Valve Gp-Control -Generator
| 22***05 | Valve Group-Control; -Generator | 1 |
| 25***76 | Valve Group-Control | 1 |
| 25***79 | Valve As-Needle | 1 |
208-1632 Valve Gp-Control -Vibratory
| 19***47 | Valve Group-Control; (Vibratory) | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
208-1631 Valve Gp-Control -Vibratory
| 19***47 | Valve Group-Control; (Vibratory) | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
251-4844 Valve Gp-Control -Generator
| 25***44 | Valve Group-Control; -Generator | 1 |
| 25***77 | Kit-Seal; (Generator Control Valve) | 1 |
| 25***79 | Valve As-Needle | 1 |
103-4924 Valve Gp-Control -Propel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***24 | Valve Group-Control; -Propel | 1 |
| 10***18 | Coil | 5 |
254-0776 Valve Gp-Control
| 25***76 | Valve Group-Control | 1 |
| 25***77 | Kit-Seal; (Generator Control Valve) | 1 |
| 27***89 | Coil-Solenoid; (Solenoid Valve) | 1 |
169-0166 Valve Gp-Counterbalance -Screed
| 07***27 | Kit-Seal; (Counterbalance Valve) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 12***16 | Solenoid As | 2 |
118-8396 Valve Gp-Counterbalance
| 11***77 | Hose As | 2 |
| 11***96 | Valve Group-Counterbalance | 1 |
| 14***16 | Connector Group | 1 |
190-4168 Valve Gp-Flow Control
| 19***68 | Valve Group-Flow Control | 1 |
| 19***01 | Coil | 1 |
| 20***76 | Kit-Seal; (Flow Control Valve)(Front Wheel Assist) | 1 |
257-5145 Valve Gp-Pump Control -Auxiliary Pump
| 25***45 | Valve Group-Pump Control; -Auxiliary Pump | 1 |
| 4J***33 | Seal Fuel Injection Pump | 1 |
| 5L***58 | Seal 14 mm(.551 In.) I. D. | 1 |
103-3602 Valve Gp-Solenoid -Extender, Slope
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 1 |
| 11***21 | Coil | 2 |
332-1453 Valve Gp-Solenoid
| 33***53 | Valve Group-Solenoid | 1 |
300-0504 Valve Gp-Solenoid -Extender, Slope
| 25***57 | Kit-Seal; (Check Valve) | 1 |
| 25***37 | Valve Group-Solenoid; (24-Volt) | 1 |
| 27***10 | Coil-Solenoid | 2 |
103-1902 Valve Gp-Solenoid
| 08***83 | Body | 1 |
| 08***85 | Spring | 2 |
| 08***86 | Washer | 2 |
1g-6319 Valve Gp-Solenoid
| 03***28 | Seal-O-Ring | 2 |
| 08***90 | Seal-O-Ring | 2 |
| 1G***19 | Valve Group-Solenoid | 1 |
300-0505 Valve Gp-Solenoid
| 25***57 | Kit-Seal; (Check Valve) | 1 |
| 25***37 | Valve Group-Solenoid; (24-Volt) | 2 |
| 27***10 | Coil-Solenoid | 2 |
197-5294 Vibratory Gp
| 10***90 | Coupling | 4 |
| 10***95 | Bearing | 8 |
| 10***39 | Key-Square | 4 |
8i-0142 Vibratory Gp
| 09***99 | Fitting-Grease; (Hydraulic) | 3 |
| 10***90 | Coupling | 4 |
| 10***95 | Bearing | 8 |
Implements
106-3483 Extension Ar -Diesel Heat, 28-In
| 10***52 | Harness As-Screed; (Extension) | 1 |
| 10***83 | Extension Ar; -Diesel Heat, 28-In | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 8 |
106-3482 Extension Ar -Diesel Heat, 12-In
| 10***51 | Harness As-Screed; (Extension) | 1 |
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 5 |
247-1276 Extension Ar-Auger
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 10***15 | Extension Group-Main Frame; -2 Ft | 2 |
| 11***09 | Bearing Group-Auger | 2 |
185-5433 Extension Ar-Auger
| 18***33 | Extension Ar-Auger | 1 |
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 21***53 | Extension Group-Main Frame | 4 |
247-1275 Extension Ar-Auger
| 10***14 | Extension Group-Main Frame; -1 Ft | 2 |
| 10***15 | Extension Group-Main Frame; -2 Ft | 2 |
| 11***09 | Bearing Group-Auger | 2 |
206-6725 Extension Ar-Screed -16-Ft
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 11***09 | Bearing Group-Auger | 2 |
| 16***71 | Support Group-Frame | 2 |
150-7725 Extension Ar-Screed -20-Ft 2-In
| 10***83 | Extension Ar; -Diesel Heat, 28-In | 2 |
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 11***09 | Bearing Group-Auger | 2 |
122-0604 Extension Ar-Screed -17-Ft 6-In
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 2 |
| 12***04 | Extension Ar-Screed; -17-Ft 6-In | 1 |
| 1G***47 | Extension Group-Auger; -6 In | 1 |
206-6726 Extension Ar-Screed -18-Ft
| 10***14 | Extension Group-Main Frame; -1 Ft | 2 |
| 10***15 | Extension Group-Main Frame; -2 Ft | 2 |
| 11***09 | Bearing Group-Auger | 2 |
206-6724 Extension Ar-Screed -20-Ft
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 10***15 | Extension Group-Main Frame; -2 Ft | 2 |
| 11***09 | Bearing Group-Auger | 2 |
245-9084 Extension Gp-Screed -Electric Heat With Vibration, 24-In
| 10***95 | Bearing | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
247-1281 Extension Gp-Screed -Maximum 20-Ft 2-In
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 11***09 | Bearing Group-Auger | 2 |
| 16***71 | Support Group-Frame | 2 |
245-9082 Extension Gp-Screed -Electric Heat With Vibration, 28-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***31 | Bar-Spacer | 1 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
245-9083 Extension Gp-Screed -Electric Heat, 12-In
| 1A***68 | Nut | 4 |
| 20***59 | Plate | 1 |
| 20***63 | Frame As | 1 |
247-1274 Extension Gp-Screed -Maximum 16-Ft
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 11***09 | Bearing Group-Auger | 2 |
245-9081 Extension Gp-Screed -Electric Heat, 12-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
8i-0521 Extension Gp-Screed -Diesel Heat With Vibration, 28-In
| 10***95 | Bearing | 2 |
| 10***12 | Shaft As-Vibratory | 1 |
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
8i-0520 Extension Gp-Screed -Diesel Heat, 12-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
185-5408 Extension Gp-Screed -Diesel Heat, 24-In
| 10***95 | Bearing | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
247-1280 Extension Gp-Screed -Maximum 17-Ft 6-In
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 21***53 | Extension Group-Main Frame | 1 |
| 24***81 | Extension Group-Screed; -Electric Heat, 12-In | 2 |
185-5419 Extension Gp-Screed -Diesel Heat, 12-In
| 18***19 | Extension Group-Screed; -Diesel Heat, 12-In | 1 |
| 1A***68 | Nut | 4 |
| 20***59 | Plate | 1 |
166-7676 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
171-3451 Hitch Gp-Truck
| 16***76 | Hitch Group-Truck; -Oscillating | 1 |
| 17***51 | Hitch Group-Truck | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
106-9665 Installation Ar-Truck Hitch
| 10***65 | Installation Ar-Truck Hitch | 1 |
| 13***85 | Lines Group-Truck Hitch | 1 |
| 17***51 | Hitch Group-Truck | 1 |
112-0897 Roller Ar-Push
| 11***96 | Roller Group-Push | 1 |
| 11***97 | Roller Ar-Push | 1 |
| 5C***66 | Bolt (25 mm Long); (5/8-11x1-In) | 1 |
112-0896 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 10***64 | Shaft As | 2 |
| 11***95 | Roller As | 1 |
112-1276 Shaft Gp-Drive -Eccentric Weight
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 11***76 | Shaft Group-Drive; -Eccentric Weight | 1 |
| 24***28 | Seal | 1 |
Lubrication System
232-7378 Filter Gp-Engine Oil
| 23***78 | Filter Group-Engine Oil | 1 |
| 7W***26 | Filter As-Engine Oil | 1 |
230-7578 Pump Gp-Engine Oil
| 10***61 | Bolt; (M10x1.50x50-mm) | 5 |
| 22***29 | Pump As-Engine Oil | 1 |
| 23***78 | Pump Group-Engine Oil | 1 |
Machine Arrangement
254-6090 Common Ar -Bg-230d
| 10***80 | Undercarriage Ar | 1 |
| 10***81 | Console Ar | 1 |
| 10***83 | Conveyor Ar-Drag & Auger | 1 |
239-3048 Common Ar -Ap-800d
| 10***80 | Undercarriage Ar | 1 |
| 10***81 | Console Ar | 1 |
| 10***83 | Conveyor Ar-Drag & Auger | 1 |
304-6914 Common Ar
| 10***80 | Undercarriage Ar | 1 |
| 10***81 | Console Ar | 1 |
| 10***83 | Conveyor Ar-Drag & Auger | 1 |
304-6912 Common Ar
| 10***80 | Undercarriage Ar | 1 |
| 10***81 | Console Ar | 1 |
| 10***83 | Conveyor Ar-Drag & Auger | 1 |
195-9753 Kit-Maintenance
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
| 10***87 | Switch As-Toggle; (Screed Raise/Hld/Float) | 1 |
241-6776 Screed Ar
| 11***66 | Lines Group-Vibratory | 1 |
| 11***68 | Lines Group-Extension | 1 |
| 12***98 | Crown Group-Manual | 1 |
241-6806 Screed Ar
| 19***85 | Lines Group-Slope | 1 |
| 19***88 | Crown Group | 1 |
| 19***94 | Vibratory Group | 1 |
Operator Station
103-4781 Console Ar
| 10***81 | Console Ar | 1 |
| 14***95 | Console Group-Operator | 1 |
144-3995 Console Gp-Operator
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 01***70 | Setscrew | 2 |
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 4 |
114-0322 Gauge Gp-Cluster
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***22 | Gauge Group-Cluster | 1 |
| 11***81 | Kit-Gauge Housing | 1 |
155-3527 Horn Gp-Electric
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***27 | Horn Group-Electric | 1 |
| 16***01 | Horn As; (24-Volt, Low Tone) | 1 |
132-9382 Lever Gp-Propel
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
244-3347 Panel Gp-Instrument
| 07***00 | Switch As-Toggle; (Starter Engine Battery Charger) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
140-8379 Platform Gp
| 10***47 | Pin | 2 |
| 10***89 | Plate As | 1 |
| 10***56 | Rod; (Prop) | 1 |
247-2709 Platform Gp-Operator
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 2 |
| 19***01 | Bracket | 2 |
| 19***03 | Platform As; (Extender) | 2 |
245-2885 Platform Gp-Operator
| 11***14 | Platform As-Top | 1 |
| 14***74 | Extension As-Platform | 2 |
| 19***37 | Platform As; (Entender) | 1 |
103-4786 Seat Gp
| 10***86 | Seat Group | 1 |
| 10***32 | Seat Group | 1 |
103-7332 Seat Gp
| 10***17 | Post As-Seat | 1 |
| 10***32 | Seat Group | 1 |
| 13***87 | Locknut | 2 |
270-2417 Seat Gp -Vinyl
| 27***17 | Seat Group; -Vinyl | 1 |
| 27***19 | Arm; (Lh) | 1 |
| 27***80 | Arm; (Rh) | 1 |
119-1784 Seat Gp
| 11***84 | Seat Group | 1 |
| 19***76 | Kit-Armrest; (Lh) | 1 |
| 19***77 | Kit-Armrest; (Rh) | 1 |
106-8541 Umbrella Gp
| 10***41 | Umbrella Group; -Bg-225c | 1 |
187-6649 Umbrella Gp -Ap-650b
| 18***49 | Umbrella Group; -Ap-650b | 1 |
Power Train
257-4430 Assist Gp-Front Wheel
| 00***31 | Cup-Bearing | 4 |
| 00***43 | Nut | 2 |
| 06***15 | Nut; (1-1/4-12-Thd) | 3 |
106-9692 Assist Gp-Front Wheel
| 00***31 | Cup-Bearing | 4 |
| 00***43 | Nut | 2 |
| 06***15 | Nut; (1-1/4-12-Thd) | 3 |
162-7569 Brake & Planetary Gp
| 12***80 | Kit-Lining; (Brake, Planetary, Output)(Outbrd.) | 1 |
| 12***81 | Kit-Lining; (Brake, Planetary, Input)(Inbrd.) | 1 |
| 12***85 | Kit-Spring; (Brake, Planetary, Input)(Inbrd.) | 1 |
8i-0765 Final Drive Gp
| 0T***56 | Bolt (2 1/2" Long) | 20 |
| 11***07 | Nut; (3/4-16-Thd) | 10 |
| 12***95 | Mount | 1 |
239-3097 Lines Gp-Propel
| 07***84 | Clamp | 2 |
| 10***21 | Hose As | 1 |
| 10***24 | Valve Group-Control; -Propel | 1 |
128-4090 Manifold Gp-Front Wheel Drive
| 11***59 | Valve-Flow | 1 |
| 11***61 | Valve-Relief; (Front Wheel Assist) | 1 |
| 12***84 | Valve-Check | 2 |
145-0093 Planetary Gp-Final Drive
| 11***95 | Cone-Bearing | 1 |
| 11***96 | Cup-Bearing | 1 |
| 11***97 | Cone-Bearing | 1 |
1g-8609 Support Gp-Motor
| 1G***09 | Support Group-Motor | 1 |
| 1G***10 | Support | 1 |
| 1G***11 | Ring-Snap | 1 |
203-9717 Valve Gp-Differential Lock
| 20***17 | Valve Group-Differential Lock, Name-Plate (Lubrication : Offset Boom), Decals; (Lubrication, Offset Boom) | 1 |
| 22***82 | Nut; (1/2-20-Thd) | 1 |
| 22***84 | Kit-Shuttle Valve; (Differential Lock) | 1 |
117-7485 Wheel Ar
| 11***85 | Wheel Ar | 1 |
| 8I***64 | Wheel Group | 2 |
117-9375 Wheel Ar
| 11***74 | Wheel Group | 2 |
| 11***75 | Wheel Ar | 1 |
117-9374 Wheel Gp
| 10***34 | Extension-Valve | 1 |
| 10***35 | Valve-Rim | 1 |
| 11***74 | Wheel Group | 1 |
180-8058 Wheel Gp
| 11***73 | Wheel As | 1 |
| 18***58 | Wheel Group | 1 |
| 2D***43 | Seal-O-Ring | 1 |
109-0957 Wheel Gp
| 08***52 | Tire; (22x6x17.75) | 1 |
| 10***56 | Wheel As | 1 |
| 10***57 | Wheel Group | 1 |
180-8057 Wheel Gp
| 18***57 | Wheel Group | 1 |
| 2D***65 | Seal-O-Ring | 1 |
| 2D***54 | Ring-Lock | 1 |
8i-0764 Wheel Gp
| 18***57 | Wheel Group | 2 |
| 1K***74 | Valve Group; (Tire Inflation) | 2 |
| 2D***07 | Stud | 1 |
Service Equipment And Supplies
239-3053 Finish Ar -Ap-800d
| 23***53 | Finish Ar | 1 |
| 24***87 | Plate & Film Group; -Ap-800d | 1 |
7r-4741 Lines Gp-Spray Down
| 08***77 | Adapter | 1 |
| 1G***70 | Extension-Curve | 1 |
| 1G***79 | Hose As | 1 |
254-0055 Plate & Film Gp
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 2 |
| 15***79 | Film-Instruction; (Grease)(Instructions) | 2 |
| 16***89 | Tack-Fastener | 4 |
254-6089 Plate & Film Gp -Bg-230d
| 25***88 | Plate & Film Group; -Bg-230d | 1 |
| 25***89 | Plate & Film Group; -Bg-230d | 1 |
226-3635 Plate & Film Gp -English
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
| 08***52 | Decal-Caution, Hopper Support | 2 |
| 11***84 | Film-Notice; (Machine Shipping) | 2 |
226-3636 Plate & Film Gp -French
| 15***07 | Film-Notice; (Machine Shipping) | 2 |
| 15***15 | Film-Warning; (Hopper Support) | 2 |
| 15***34 | Film-Warning; (Mounting) | 2 |
226-3638 Plate & Film Gp -French
| 15***07 | Film-Notice; (Machine Shipping) | 2 |
| 15***15 | Film-Warning; (Hopper Support) | 2 |
| 15***34 | Film-Warning; (Mounting) | 2 |
226-3637 Plate & Film Gp -English
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
| 08***52 | Decal-Caution, Hopper Support | 2 |
| 11***84 | Film-Notice; (Machine Shipping) | 2 |
254-6088 Plate & Film Gp -Bg-230d
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 6 |
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 11***73 | Film-Stripe; (450-cm Each) | 0 |
254-0057 Plate & Film Gp
| 08***54 | Film-Notice; (Screed Retract) | 2 |
| 10***08 | Film; (Screed Adjustment)(Extender Screed) | 1 |
| 10***14 | Handle | 1 |
245-3287 Plate & Film Gp -Ap-800d
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 6 |
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 12***52 | Scale-Indicator | 1 |
Slope And Grade Control
119-1765 Beam Gp-Transverse
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 10 |
| 08***15 | Cushion-Rubber | 2 |
| 11***65 | Beam Group-Transverse | 1 |
185-4102 Control Ar-Grade
| 10***76 | Mounting Group-Control; -Grade Sensor | 2 |
| 18***60 | Sensor Group-Grade | 1 |
| 18***02 | Control Ar-Grade | 1 |
209-3130 Control Gp-Grade & Slope
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
| 14***76 | Plug-Connector | 1 |
106-9672 Control Gp-Grade & Slope
| 10***72 | Control Group-Grade & Slope | 1 |
| 10***75 | Control-Slope | 1 |
| 11***80 | Cable As | 1 |
209-3127 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 10***36 | Cable As | 2 |
| 11***95 | Plug | 1 |
239-2367 Control Gp-Grade & Slope
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
106-9676 Mounting Gp-Control -Grade Sensor
| 10***76 | Mounting Group-Control; -Grade Sensor | 1 |
| 13***89 | Support As; (Sensor) | 1 |
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 10 |
209-3132 Sensor Gp-Grade -Averaging Ski
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
185-4060 Sensor Gp-Grade
| 10***91 | Strap | 1 |
| 10***74 | Sensor Group-Position; -Grade | 1 |
| 11***80 | Cable As | 1 |
209-3131 Sensor Gp-Grade -Sonic
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
Undercarriage
113-5387 Bogie Gp
| 00***31 | Cup-Bearing | 8 |
| 00***43 | Nut | 4 |
| 06***15 | Nut; (1-1/4-12-Thd) | 3 |
239-2366 Mounting Gp-Averaging Ski
| 23***66 | Mounting Group-Averaging Ski | 1 |
| 28***75 | Collar | 4 |
| 28***77 | Tube | 2 |
103-4780 Undercarriage Ar
| 10***80 | Undercarriage Ar | 1 |
| 8I***65 | Final Drive Group | 2 |
AP-800D serial number reference
The PIN plate on the AP-800D is mounted on the paver frame near the operator's station, typically on the tractor unit frame rail or under the cowl close to the engine compartment; some units repeat it on the frame near the fuel tank. The plate reads as an 8-character PIN: the first 3 letters/digits are the serial number prefix identifying the machine model and configuration, followed by a 6-digit sequence number for that specific unit.
| Prefix | Identifies | Notes |
|---|---|---|
| A5P | AP-800D asphalt paver, Cat-branded | Standard Cat-badged AP-800D, serial range A5P1-Up. Fitted with the 3054C turbocharged diesel rated about 97 kW (130 hp) at 2200 rpm. Parts fitment listings (console, flood lamp, auger extension, fuel injection pump, pump drive group) consistently pair A5P1-Up with BG-230D's B4G1-Up as the same base machine. |
| B4G | BG-230D asphalt paver, Barber-Greene-badged twin of the AP-800D | Same chassis and 3054C engine as the A5P-prefix AP-800D, sold under the Barber-Greene BG-230D designation, serial range B4G1-Up (also written B4G00001-Up in the service manual). Parts catalogs consistently pair B4G1-Up with A5P1-Up as interchangeable fitment across multiple component groups (electrical, fuel system, drivetrain). Same family/generation as A5P, not a separate model. |
Frequently asked questions
What engine does the Cat AP-800D use?
A Cat 3054C turbocharged diesel producing roughly 97 kW (130 hp) gross at 2200 rpm. It is mechanically governed with no ECM or electronic fault codes - monitor it through gauges and warning lamps rather than a diagnostic display.
What is the operating weight of the AP-800D?
Base chassis weight without screed runs roughly 12,000-13,600 kg (26,500-30,000 lb). Total operating weight varies by configuration since it depends on the screed and extension package fitted - check the data plate for your specific unit.
What replaced the AP-800D?
No single model replaced it one-for-one. Caterpillar discontinued the 8-foot AP-800 numbering and folded that segment into its current rubber-tired AP400, AP455, AP500, and AP555 paver lineup.
What AP-800D owners discuss
What engine and propel setup does the AP-800D run, and are there known quirks owners flag?
The AP-800D uses a turbocharged 3054C diesel rated around 130 hp (97 kW) at 2200 rpm, paired with a hydrostatic propel system offering four speed ranges. The mechanical injection pump on this engine family is sensitive to alignment during service — a retimed or poorly reseated pump commonly shows up as rough idle, black smoke under load, or erratic power rather than a clean failure. A leaking front injection-pump shaft seal is also a known way fuel and oil cross-contaminate, so check crankcase oil for fuel dilution at every service interval.
What wear patterns show up on the feeder and auger system over time?
Feeder bearings sit directly in the hot-mix path and wear fastest on abrasive aggregate blends; once the seal goes, contaminated mix accelerates bearing failure quietly, so check for play at every PM rather than waiting for noise. Auger flights lose thickness and go from square-edged to knife-edged with hours — the first sign is usually streaking or an uneven material head in front of the screed, not an obvious auger fault. Feeder floor plates thin and warp from heat and abrasion long before they visibly fail, so they're worth a direct look rather than a walk-by.
Anything specific to watch on the screed and its heating system?
Screed plates are the fastest-wearing part on a paver this size and typically need replacing once or twice a season depending on mix abrasiveness and hours. Wear concentrated at just the front or rear edge of a plate usually points to a twisted screed frame, not the plate itself. On heating, the control system is built to auto-compensate if a single zone temperature sensor fails, so a cold zone may not throw a fault even though a sensor already died — check zone temperatures by hand periodically instead of trusting the display alone.
Are there common electrical or sensor complaints on this generation of paver?
Nothing unique to the AP-800D shows up beyond what's typical for its era of Cat electronics — most reported faults trace to chafed or corroded harness connectors rather than a bad control module. A code that reads like a sensor fault is worth checking at the connector first (short-to-ground versus short-to-power wiring behaves differently) before the sensor gets replaced. Given the machine's age, harness and connector corrosion is the leading electrical complaint, not module failure. Have your dealer verify the wiring diagnosis before replacing any electronic component.
Does the cooling system need special attention on the AP-800D?
Yes. Asphalt dust coats the radiator fins and builds a sticky surface that traps more dust, and that's the most common cause of overheating on paver-class machines like this. The AP-800D's fan is electronically controlled and hydraulically driven for on-demand cooling, so a fan running constantly at high speed even under light load is worth investigating as a sign the radiator core is already partly blocked. Daily fin cleaning with low-pressure air, not a pressure washer, is the standard preventive step owners describe.
Since the AP-800D is a rubber-tire paver, what wear pattern should I expect instead of track/undercarriage wear?
The AP-800D is a wheeled machine, not one of Cat's track (Mobil-Trac) pavers, so bogie and track-tension wear items don't apply here. Wear instead shows up as uneven tire wear tied to steering-cylinder or hydrostatic-drive alignment, and reduced traction on grade as tires age. Confirm steering response is even side-to-side and check for matched tire wear before assuming a power complaint is engine-related — on a hydrostatic-drive paver a soft or slipping tire can mimic low engine power.
What should a buyer check specifically on a used AP-800D?
Confirm the exact engine and generation first — the AP-800 family spans more than one engine and prefix combination across its production run, and 3054C-based D-series data doesn't cross over cleanly with earlier variants. Beyond that, walk the standard wear list: screed plate thickness and frame straightness, auger flight edge condition and shaft play, feeder floor plate thickness, conveyor chain sag or stretch, feeder/auger bearing play, and thickness-control screw binding (a sign of worn bushings) plus scoring on the extender tubes. Run the hydrostatic propel through its full speed range for smooth, hunt-free engagement, and if the optional generator is fitted, confirm it actually loads to rated output. Have your dealer verify serial-prefix and engine records match the machine's actual configuration before you commit.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific AP-800D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.