Caterpillarasphalt paver
Caterpillar AP-800C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar AP-800C is an 8-ft (2.44 m) class rubber-tired asphalt paver built around the Caterpillar 3054DIT turbocharged diesel, a direct-injection four-cylinder rated at 80 kW (107 hp) gross and 75 kW (101 hp) net at 2200 rpm, 4.0 L (243 cu in) displacement, driving a fully hydrostatic propel, feeder, auger, and vibrator system. Operating weight runs roughly 13,575-15,470 kg (29,930-34,100 lb) depending on the screed fitted - Pavemaster 8B/10B or Extend-A-Mat 8-16B/10-20B - with base paving width of 2.44 m (8 ft) extending out to 6.1-9.1 m (20-30 ft) depending on screed and extension kit. It rides on solid rubber tires, 13x22 standard or 16x24 optional, steered rather than tracked. The AP-800C is the middle generation of a three-generation AP-800 family: it followed the Perkins T4.236-powered AP-800/AP-800B and was itself succeeded by the AP-800D, which stepped up to Caterpillar's own 3054C engine at roughly 130 hp. Factory records place the AP-800C under serial prefixes 1PM and 9AL, the latter also tied to Barber-Greene BG-230 parts catalogs from the era of Cat's acquisition of that paver line.
The move to the AP-800C's own Cat 3054DIT engine folded this paver fully into Caterpillar's engine parts and service network, replacing the earlier Perkins-sourced powertrain and its separate parts trail. The later AP-800D pushed power higher with the 3054C but kept the same 8-ft screed class and general chassis layout, so the AP-800C sits as the DIT-generation link between a Perkins-era machine and a more powerful successor - though the 3054DIT itself still runs a mechanical rotary injection pump, not common-rail electronics, so it troubleshoots differently than later 3054C applications. In the used and parts market today the AP-800C holds value as a simple, mechanically governed hydrostatic paver: fewer electronic control layers than newer machines, wide availability of 3054-family engine parts, and a well-documented Barber-Greene/Cat parts lineage for the hopper, conveyor, auger, and screed-drive groups. Buyers still shop it for municipal, parking-lot, and driveway-scale asphalt work where its compact 8-ft class size and rubber-tired mobility outweigh the lower output of newer compact pavers.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar AP-800C specifications
Engine
| Engine model | Caterpillar 3054DIT, four-stroke-cycle, four-cylinder, turbocharged diesel |
| Gross power | 80 kW (107 hp) @ 2200 rpm (ISO 14396) |
| Net power | 75 kW (101 hp) @ 2200 rpm (ISO 9249 / ISO 3046 / EEC 80/1269); 74 kW (100 hp) per SAE J1349 |
| Displacement | 4.0 L (243 cu in); bore 100 mm (3.937 in), stroke 127 mm (5.0 in) |
| Emissions | Meets EPA/CARB emissions engine regulations in effect at time of build (1999-era rating); no altitude derating required up to 2134 m (7,000 ft) |
Weights
| Operating weight, with Extend-A-Mat 8-16B screed | 15 195 kg (33,500 lb) |
| Operating weight, with Pavemaster 8B screed | 13 575 kg (29,930 lb) |
| Operating weight, with Extend-A-Mat 10-20B screed | 15 470 kg (34,100 lb) |
| Operating weight, with Pavemaster 10B screed | 13 860 kg (30,550 lb) |
| Ground pressure | Not published for this model |
Dimensions
| Length with push roller (Extend-A-Mat screed) | 6508 mm (21' 3.25"); with truck hitch: 6966 mm (22' 10.25") |
| Length with push roller (Pavemaster screed) | 6013 mm (19' 8.75"); with truck hitch: 6496 mm (21' 3.75") |
| Operating width | 8' screed: 3269 mm (10' 8.7"); 10' screed: 3327 mm (10' 11") |
| Overall height | 3023 mm (9' 11") |
| Transport width, hoppers raised, with end gates | 8' screed: 2718 mm (8' 11"); 10' screed: 3327 mm (10' 11") |
| Transport width, hoppers raised, without end gates | 8' models: 2438 mm (8'); 10' models: 3048 mm (10') |
| Transport height (muffler removed) | 2600 mm (8' 6.5") |
| Wheelbase | 2337 mm (92 in) |
| Inside turning radius | approximately 2.9 m (9' 6") per factory literature |
| Truck entry width | 3182 mm (10' 5") |
| Truck dump height | 584 mm (23 in) |
| Hopper capacity | 5.5 cu m (195 cu ft) |
Performance
| Pave speed, low range | 0-46 m/min (0-150 ft/min) |
| Pave speed, high range | 0-76 m/min (0-250 ft/min) |
| Travel speed, low range | 0-11.3 km/h (0-7 mph) |
| Travel speed, high range | 0-19 km/h (0-12 mph) |
| Standard paving width | 2.44 m (8 ft) |
| Paving width range (Extend-A-Mat 8-16B screed) | 2.44-4.75 m (8'-15' 6"); with cutoff shoes and extensions: 1.8-6.1 m (6'-20' 2") |
| Paving width range (Extend-A-Mat 10-20B screed) | 3.05-5.94 m (10'-19' 6"); with cutoff shoes and extensions: 2.44-7.37 m (8'-24' 2") |
| Paving width range (Pavemaster 8B screed) | fixed 2.44 m (8'); with cutoff shoes and extensions: 1.8-6.1 m (6'-20') |
| Paving width range (Pavemaster 10B screed) | fixed 3.05 m (10'); with cutoff shoes and extensions: 2.44-9.14 m (8'-30') |
| Front wheel assist (optional) | increases rimpull approximately 20 percent for soft-base traction |
| Gradeability | Not published for this model |
Service capacities (summary)
| Fuel tank | 189 L (50 gal) |
| Hydraulic oil tank | 189 L (50 gal) |
| Cooling system | 19 L (5 gal) |
| Engine oil | Not published for this model - verify with dealer or engine O&M manual |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
AP-800C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) — Cat 3054DIT turbocharged diesel | not broken out in the machine refill-capacity table; typical for this 4-cylinder industrial engine family is about 6.9 L (7.3 US qt), varies with sump/dipstick configuration — confirm on dipstick or OMM lubrication chart | Cat DEO (Diesel Engine Oil), API CH-4 or higher. SAE 15W-40 for normal ambient range; SAE 10W-30 in cooler climates; Cat DEO Cold Weather 0W-40 for extreme cold starts. Change with Cat Ecoplus-type spin-on filter. |
| Cooling system | 19 L (5 US gal) | Cat ELC (Extended Life Coolant) or Cat DEAC (Diesel Engine Antifreeze/Coolant), 50/50 water-glycol premix rated for low-ambient protection. Engine is transverse-mounted for ground-level radiator access. |
| Fuel tank | 189 L (50 US gal) | No. 2-D diesel fuel (ULSD), 35 degree API gravity reference fuel per Cat rating standard. Intake manifold heater aids cold-weather starts. |
| Hydraulic system (tank and circuit — also supplies the fully hydrostatic propel drive, feeder/auger, vibrator and auxiliary circuits, no separate transmission fluid) | 189 L (50 US gal) | Cat HYDO Advanced, viscosity grade selected by ambient temperature (lighter grade in cold climates, heavier in hot climates). Cat TDTO or a commercial heavy-duty diesel engine oil with at least 900 ppm zinc is an acceptable alternate if Cat HYDO is unavailable. System uses 10-micron filtration on propel and feeder circuits, 125-micron strainers on vibrator and auxiliary pump inlets, and a 10-micron return filter with a condition indicator. |
| Wheel-motor planetary final drives (two-speed, one per drive wheel) | sealed units mounted directly to the hydrostatic wheel motors; no separate refill capacity published for this machine — lubrication is serviced as part of the drive assembly, not as a standalone reservoir | not separately specified — follow the drive-unit service procedure in the shop manual; do not substitute a generic axle/final-drive oil without confirming against that procedure |
| Grease (chassis, steering bogies, auger/feeder bearings, screed pivots) | spec only — no reservoir volume, applied via lube fittings clustered for quick service | Cat Multipurpose Grease (MPGM), NLGI 2, for normal-duty chassis and pivot points. Cat Ultra 5 Moly or Advanced 3Moly grease for heavy-load pin/bushing joints where extra film strength is needed. Cold-climate machines can use Cat Arctic Platinum grease. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar AP-800C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the AP-800C beyond the schedule
Predictive Maintenance & Fluid Analysis
Pull engine oil, hydraulic oil, and coolant samples on the 3054DIT and hydrostatic circuit on a schedule rather than waiting for symptoms - the mechanical rotary injection pump and charge-pump pilot circuit both degrade quietly before they fail outright. Track pilot pressure cold versus warmed-up: a widening gap flags a loading pilot filter or weak charge pump before propel speed visibly drops off. Watch auger gearbox oil for metal fines and monitor coolant closely, since the small 19 L (5 gal) cooling system leaves little margin before scale or a dust-packed core cause overheating.
Corrective & Common Repairs
Most field repairs trace to abrasive wear in the material path: sagging conveyor and auger chains cause surging and starvation ahead of the screed, worn floor plates and auger flighting cause segregation, and buildup on the sonic feed sensor face produces erratic readings that look like sensor failure. On the 3054DIT, air-in-fuel symptoms and shutdowns usually come from a weak lift pump, a blocked fuel tank vent, or a loading pilot filter rather than the mechanical pump itself. Uneven screed plate wear almost always traces back to tow point calibration or screed heat balance, not plate material.
Overhaul & Rebuild Points
High-hour rebuild targets center on the hydrostatic drive and engine top end: rebuild the charge pump, main propel pumps, and wheel motors as a matched set once pilot pressure and propel speed degrade together, not piecemeal. The 3054DIT's turbocharger, injection pump, and valve train warrant inspection once oil consumption or boost performance slips. Auger gearbox bearings and seals, conveyor chain, auger flighting, and screed plates all wear on the same abrasive-material cycle and are usually replaced together during a major service. Tow point and frame pin and bushing wear is a strong proxy for overall machine condition.
Seasonal & Environment Servicing
Before paving season, verify every screed heater element and thermostat brings the Pavemaster or Extend-A-Mat screed to temperature evenly - a cold spot tears the mat and gets blamed on other systems. Clean the radiator core of packed asphalt dust and fines more often than the base interval suggests, since paver duty loads it faster than other equipment types. For off-season storage, drain the fuel/water separator, protect the mechanical fuel system from moisture, maintain battery charge, and cover exposed hydraulic cylinder rods and screed plates from corrosion. In cold climates, fully warm the hydrostatic system before loading the propel drive.
AP-800C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 119-0073 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 8N-9803 | Filter-Fuel | Fuel system service | Check fitment → |
| 102-9387 | Filter Element As-Air | Air intake service | Check fitment → |
| 102-9388 | Filter Element As-Air | Air intake service | Check fitment → |
| 077-5232 | Filter Element-Breather | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
AP-800C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 0100 FMI 03 | Engine oil pressure sensor circuit voltage above normal range | Open or shorted-to-power wiring on the oil pressure sensor circuit, or a failed sensor | Check sensor connector and wiring for damage or corrosion, then test sensor supply voltage before replacing the sensor |
| CID 0100 FMI 04 | Engine oil pressure sensor circuit voltage below normal range, or low oil pressure condition | Shorted-to-ground wiring, failed sensor, or genuinely low oil pressure from oil level, filter, or pump wear | Stop the engine, check oil level and filter condition first, then check wiring and sensor before restarting |
| CID 0110 FMI 03 | Engine coolant temperature sensor circuit voltage above normal range | Open circuit or damaged wiring at the coolant temperature sensor | Inspect sensor connector and harness for open circuit, test sensor resistance against spec, replace sensor if out of range |
| CID 0110 FMI 00 | Engine coolant temperature above normal operating range (overheat event) | Low coolant level, blocked radiator core, slipping or failed fan drive, or thermostat stuck closed | Shut down and let the engine cool, check coolant level and radiator fins, verify fan operation before returning to service |
| CID 0111 FMI 01 | Engine coolant level below normal | Coolant loss from a leak in hoses, radiator, water pump, or head gasket | Inspect cooling system for external leaks, pressure test the system, top up coolant only after the leak is found and fixed |
| CID 0102 FMI 03 | Turbocharger boost pressure sensor circuit voltage above normal range | Damaged sensor wiring or a failed boost pressure sensor | Check sensor harness and connector, verify sensor supply voltage, replace sensor if wiring checks out good |
| CID 0168 FMI 02 | Electrical system (battery/charging) voltage erratic or intermittent | Loose or corroded battery terminals, worn alternator brushes, or a faulty voltage regulator | Check battery terminals and ground straps for corrosion, load-test the battery, then test alternator output |
| CID 0167 FMI 04 | Alternator charging voltage below normal range | Failing alternator, worn drive belt, or high-resistance wiring in the charging circuit | Check belt tension and condition, test alternator output at the battery, repair or replace as needed |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
AP-800C attachments & work tools
Companion screed units
AP-800C tractors pair with bolt-on Cat screeds in the AS2251, AS2301, AS3251C, and AS3301C range for this 8-ft (2.4 m) paver class. Screed and tractor are matched as a set rather than freely interchangeable across paver models.
Screed width and extensions
Base screed width is 8 ft (2.44 m). Wider mats are reached with bolt-on strike-off extensions and, on the vibratory AS3251C/AS3301C units, hydraulically powered rear-mounted extenders; exact maximum extended width for this specific screed pairing is not confirmed in factory literature, so verify against the screed's own spec sheet or data plate.
Screed compaction and heating
The AS3251C/AS3301C-family screeds are vibratory, with hydraulically driven vibrators on the main screed and extenders that run synchronized. Screed plates use electric heat elements to bring the mat surface to temperature before paving starts.
Auger extensions
Auger extension sections are fitted to match the installed screed width, carrying mix out to the extended strike-off plates and keeping an even material head across the full paving width. Extension length is sized to the specific bolt-on or hydraulic extender kit in use.
Hopper and material feed
The front hopper uses fold-up wings to widen intake at the truck-dump end and fold in for transport or narrow work. Rated hopper volume is not reliably confirmed for this exact model from available factory data; check the machine's own spec sheet rather than assuming a figure.
Tow point / push-roller assembly
A fixed push-roller (tow-point) assembly at the front of the tractor takes contact from the delivery truck's tires during material transfer. It is a standard factory-fitted component on this class of rubber-tired paver, not an add-on attachment, with position adjustment built in.
Tire and undercarriage options
The AP-800C runs on solid rubber tires rather than tracks, offered with 13x22 as the base size and 16x24 as a larger alternate size for a wider footprint. Tire choice affects flotation and transport width but not paving-width capability.
Operator station protection
Operator protection for this paver class typically includes a canopy/ROPS top, windshield, and umbrella-style sunshade as factory or dealer-fit options. The specific option list offered on AP-800C production is not independently confirmed model-by-model, so confirm against the unit's build sheet.
Screed mounting method
Screeds mount to the tractor through a fixed leveling-arm/pull-arm linkage rather than a quick-coupler system, so screed swaps require a screed built for this tractor's arm geometry, not a universal-fit attachment.
All AP-800C assemblies by section
Every catalogued assembly group for the Caterpillar AP-800C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
142-2911 Air Cleaner Gp
| 06***76 | Elbow | 2 |
| 06***89 | Reducer | 1 |
| 10***87 | Filter Element As-Air; (Secondary) | 1 |
103-7338 Air Cleaner Gp
| 06***76 | Elbow | 2 |
| 07***29 | Reducer | 1 |
| 10***87 | Filter Element As-Air; (Secondary) | 1 |
6i-4203 Cartridge Gp-Turbocharger
| 6I***03 | Cartridge Group-Turbocharger | 1 |
| 6I***04 | Housing As | 1 |
| 6I***05 | Wheel | 1 |
103-7329 Exhaust Gp
| 10***86 | Pipe As-Exhaust | 1 |
| 10***91 | Tube | 1 |
| 10***29 | Exhaust Group | 1 |
143-2880 Exhaust Gp
| 10***91 | Tube | 1 |
| 10***80 | Gasket-Exhaust | 1 |
| 14***57 | Pipe As-Exhaust | 1 |
142-1816 Flange Gp-Exhaust
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
| 14***16 | Flange Group-Exhaust | 1 |
| 6I***63 | Nut; (M10x1.15-Thd) | 3 |
100-3163 Manifold Gp-Exhaust
| 03***18 | Gasket | 2 |
| 10***63 | Manifold Group-Exhaust | 1 |
| 10***64 | Manifold-Exhaust | 1 |
134-7208 Manifold Gp-Inlet
| 06***58 | Clamp-Hose | 1 |
| 12***30 | Elbow | 1 |
| 13***01 | Hose-Inlet | 1 |
6i-4680 Manifold Gp-Inlet
| 06***58 | Clamp-Hose | 1 |
| 13***01 | Hose-Inlet | 1 |
| 13***05 | Manifold-Inlet | 1 |
118-6948 Precleaner Gp
| 11***48 | Precleaner Group | 1 |
| 1M***50 | Bowl | 1 |
| 9M***59 | Clamp Tube Assembly To Flange | 1 |
6i-4195 Turbocharger Gp
| 03***48 | Fitting-Brass | 1 |
| 10***66 | Gasket | 1 |
| 10***17 | Elbow-Exhaust | 1 |
138-2077 Turbocharger Gp
| 13***77 | Turbocharger Group | 1 |
| 16***89 | Housing As | 1 |
| 16***90 | Housing As | 1 |
138-9809 Turbocharger Gp
| 06***58 | Clamp-Hose | 2 |
| 10***54 | Nut | 3 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
118-8384 Turbocharger Gp
| 11***84 | Turbocharger Group | 1 |
| 6I***03 | Cartridge Group-Turbocharger | 1 |
| 7C***29 | Housing As | 1 |
219-9766 Turbocharger Gp
| 16***89 | Housing As | 1 |
| 16***90 | Housing As | 1 |
| 16***92 | Cartridge Group-Turbocharger | 1 |
Basic Engine
138-8420 Camshaft Gp
| 06***79 | Dowel | 1 |
| 06***99 | Bushing-Idler Gear | 2 |
| 06***00 | Plate-Retaining | 1 |
6i-0894 Camshaft Gp
| 06***79 | Dowel | 1 |
| 09***99 | Washer | 1 |
| 13***30 | Camshaft | 1 |
141-6149 Cover Gp-Accessory Drive
| 06***10 | Washer | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
6i-0643 Cover Gp-Accessory Drive
| 06***10 | Washer | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
140-7471 Cover Gp-Valve Mechanism
| 10***49 | Hose; (Crankcase Breather) | 1 |
| 10***75 | Seal | 3 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
106-8750 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 10***46 | Seal | 1 |
| 10***50 | Cover Group-Valve Mechanism | 1 |
6i-1079 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 1 |
138-8415 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 1 |
106-8759 Cylinder Block Gp
| 03***63 | Plug | 1 |
| 06***08 | Plug | 1 |
| 06***09 | Plug-Facing | 1 |
6i-4238 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
138-8414 Cylinder Block Gp
| 06***08 | Plug | 1 |
| 11***40 | Housing As | 1 |
| 11***41 | Gasket | 1 |
209-5562 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
209-6725 Cylinder Block Gp
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
| 06***06 | Plug | 2 |
132-3874 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
6i-3874 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
152-2884 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
127-3325 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
209-5557 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
101-4072 Cylinder Head Gp
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 10***11 | Gasket | 1 |
138-8417 Cylinder Head Gp
| 03***18 | Pin | 2 |
| 13***17 | Cylinder Head Group | 1 |
| 14***76 | Cylinder Head Group | 1 |
164-6098 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
132-9254 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
6i-1195 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***54 | Washer | 8 |
| 06***34 | Cotter-Cap | 16 |
147-1976 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
162-7858 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
139-0644 Drive Gp-Fan
| 10***63 | Bolt; (M10x1.5x80-mm) | 4 |
| 10***31 | V-Belt Set; (Includes 2-Belts)(1334-mm) (Fan Drive) | 1 |
| 13***79 | Pulley-Fan Drive | 1 |
106-9333 Drive Gp-Fan
| 10***63 | Bolt; (M10x1.5x80-mm) | 4 |
| 10***31 | V-Belt Set; (Includes 2-Belts)(1334-mm) (Fan Drive) | 2 |
| 10***33 | Drive Group-Fan | 1 |
104-8649 Drive Gp-Pump
| 10***49 | Drive Group-Pump | 1 |
| 10***53 | Hose As | 1 |
| 1T***17 | Bolt-12 Point Head; (3/8-24x1-In) | 8 |
8i-0867 Drive Gp-Pump
| 00***42 | Breather; (Generator Oil) | 1 |
| 00***34 | Bearing As-Tapered Roller | 8 |
| 01***24 | Bushing To Supply Port | 1 |
142-2910 Engine Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
| 10***56 | Sender As-Pressure; (Oil) | 1 |
104-6581 Engine Gp
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
| 10***81 | Engine Group | 1 |
| 10***56 | Sender As-Pressure; (Oil) | 1 |
100-6323 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 6 |
| 10***23 | Flywheel Group | 1 |
6i-1157 Gear Gp-Front
| 06***99 | Bushing-Idler Gear | 2 |
| 06***00 | Plate-Retaining | 1 |
| 2W***29 | Gear As-Idler; (63-Teeth) | 1 |
101-3613 Housing Gp-Flywheel
| 10***13 | Housing Group-Flywheel | 1 |
| 10***15 | Bolt; (M8x1.25x10-mm) | 2 |
| 10***17 | Plug | 3 |
133-9466 Housing Gp-Flywheel
| 10***17 | Plug | 3 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
138-8419 Housing Gp-Front
| 13***19 | Housing Group-Front | 1 |
| 14***44 | Shield | 1 |
| 14***45 | Damper | 1 |
6i-0834 Housing Gp-Front
| 10***77 | Stud | 2 |
| 10***90 | Plug | 1 |
| 14***44 | Shield | 1 |
142-0348 Lifting Gp-Engine
| 14***53 | Plate | 1 |
| 14***48 | Lifting Group-Engine | 1 |
| 14***49 | Plate-Lifting | 1 |
6i-0652 Lifting Gp-Engine
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
| 6I***93 | Bolt; (M10x1.5x30-mm) | 2 |
| 6I***52 | Lifting Group-Engine | 1 |
127-3293 Mounting Gp-Alternator
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 10***48 | Pulley | 1 |
143-5313 Mounting Gp-Alternator
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 1 |
| 10***48 | Pulley | 1 |
| 10***49 | Bracket | 1 |
103-7336 Mounting Gp-Engine
| 03***34 | Screw | 8 |
| 10***75 | Support As-Engine; (Rh) | 1 |
| 10***76 | Support As-Engine; (Lh) | 1 |
139-0669 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
106-8851 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 10***71 | Bolt | 6 |
| 10***51 | Pan Group-Oil | 1 |
138-8416 Piston & Rod Gp
| 12***36 | Ring-Retaining | 2 |
| 13***73 | Kit-Piston Ring | 4 |
| 13***16 | Piston & Rod Group | 1 |
6i-0890 Piston & Rod Gp
| 06***83 | Bolt-Rod Cap | 2 |
| 10***53 | Piston As | 4 |
| 11***20 | Kit-Piston Ring | 4 |
134-0183 Plug Gp-Cylinder Block
| 03***63 | Plug | 2 |
| 13***83 | Plug Group-Cylinder Block | 1 |
140-8954 Plug Gp-Engine
| 14***54 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
6i-0500 Pulley Gp-Crankshaft
| 6I***00 | Pulley Group-Crankshaft | 1 |
| 6I***01 | Block | 1 |
| 6I***02 | Pulley | 1 |
6i-1204 Valve Mechanism Gp
| 00***06 | Ring-Retaining | 2 |
| 03***07 | Shaft As | 1 |
| 06***83 | Plug-Shaft End | 2 |
138-8418 Valve Mechanism Gp
| 00***06 | Ring-Retaining | 2 |
| 06***83 | Plug-Shaft End | 2 |
| 06***87 | Spring-Shaft | 2 |
Controls
206-6698 Adjuster Gp-Height
| 10***24 | Tube As; (Vertical) | 4 |
| 10***39 | Key-Square | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
197-9844 Chain Gp-Screed
| 10***87 | Link-Connecting | 1 |
| 19***33 | Link-Offset | 1 |
| 19***44 | Chain Group-Screed | 1 |
222-7158 Control Gp-Thickness -Clockwise
| 13***77 | Lockout | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
| 1D***20 | Nut,Plain,Hexagon Gear Mtg | 2 |
222-7160 Control Gp-Thickness -Counterclockwise Acme
| 13***77 | Lockout | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
| 1D***20 | Nut,Plain,Hexagon Gear Mtg | 2 |
165-4719 Control Gp-Thickness -Standard Ccw
| 13***20 | Rod-Threaded | 2 |
| 13***23 | Sleeve As-Adjustment | 2 |
| 16***19 | Control Group-Thickness; -Standard Ccw | 1 |
222-7157 Control Gp-Thickness -Counterclockwise
| 13***77 | Lockout | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
| 1D***20 | Nut,Plain,Hexagon Gear Mtg | 2 |
197-5288 Crown Gp
| 10***39 | Key-Square | 1 |
| 11***50 | Sprocket; (12-Teeth) | 1 |
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 1 |
185-4044 Jack Gp-Height Adjuster
| 18***65 | Jack Group-Height Adjuster | 1 |
| 18***44 | Jack Group-Height Adjuster | 1 |
| 1F***50 | Nut Rops Support | 1 |
196-2503 Jack Gp-Height Adjuster
| 10***64 | Bearing-Thrust | 2 |
| 11***49 | Worm | 1 |
| 19***03 | Jack Group-Height Adjuster | 1 |
185-4056 Jack Gp-Height Adjuster
| 18***65 | Jack Group-Height Adjuster | 1 |
| 18***56 | Jack Group-Height Adjuster | 1 |
| 1F***50 | Nut Rops Support | 1 |
197-9849 Shaft Gp-Drive -Rear
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***45 | Spindle As | 1 |
197-9850 Shaft Gp-Drive -Front
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***12 | Spindle As | 1 |
Cooling System
139-2615 Connection Gp-Water
| 13***15 | Connection Group-Water | 1 |
| 14***15 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
| 14***88 | Seal; (Housing, Regulator)(Temperature Regulator Housing) | 1 |
143-5135 Cooler Gp-Fltr Base & Eng Oil
| 06***06 | Plug | 1 |
| 10***13 | Adapter | 1 |
| 10***23 | Plate | 1 |
106-8722 Cooler Gp-Fltr Base & Eng Oil
| 03***63 | Plug | 1 |
| 06***06 | Plug | 1 |
| 10***13 | Adapter | 1 |
103-7340 Cooling Gp-Supplemental
| 10***40 | Bracket As | 1 |
| 10***41 | Bracket As | 1 |
| 10***43 | Mount-Flexible | 2 |
139-0664 Extension Gp-Fan
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 4 |
| 13***17 | Stud | 4 |
| 13***64 | Extension Group-Fan | 1 |
106-8758 Lines Gp-Water
| 06***58 | Clamp-Hose | 2 |
| 10***58 | Lines Group-Water | 1 |
| 13***56 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
139-0642 Plug Gp-Water Lines
| 10***87 | Plug | 16 |
| 13***70 | Plug | 4 |
| 13***42 | Plug Group-Water Lines | 1 |
6i-0441 Pump Gp-Water
| 10***95 | Bolt; (M8x1.25x35-mm) | 2 |
| 6I***93 | Bolt; (M8x1.25x80-mm) | 1 |
| 6I***41 | Pump Group-Water | 1 |
139-2614 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 4 |
| 12***86 | Clamp-Hose | 2 |
151-4825 Pump Gp-Water
| 15***25 | Pump Group-Water | 1 |
| 15***38 | Seal | 1 |
| 20***29 | Seal-O-Ring | 1 |
166-4501 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 10***71 | Bolt | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 3 |
6i-0442 Pump Gp-Water
| 10***25 | Bolt | 6 |
| 15***40 | Kit-Water Pump | 1 |
| 6I***00 | Seal | 1 |
Electrical And Starting System
113-4133 Alternator Gp-Charging
| 10***04 | Bracket | 1 |
| 11***33 | Alternator Group-Charging | 1 |
| 11***30 | Bracket | 1 |
9w-3043 Alternator Gp-Charging
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 5 |
| 10***63 | Regulator As-Alternator; (24-Volt) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
104-6586 Battery Gp
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 3 |
| 03***97 | Boot | 1 |
| 10***86 | Battery Group | 1 |
110-0495 Box Gp-Junction
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 10***23 | Board-Control | 2 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 9 |
6r-0699 Control Gp-Conv/Auger Pump Dr
| 10***37 | Gasket | 1 |
| 10***38 | Cover | 1 |
| 3K***68 | Bolt-Socket Head; (10-32x0.625-In) | 4 |
127-2983 Conversion Gp-Tow Point
| 09***17 | Washer | 8 |
| 12***83 | Conversion Group-Tow Point | 1 |
| 12***84 | Wire As | 2 |
164-7360 Cover Gp-Wiring Harness
| 16***60 | Cover Group-Wiring Harness | 1 |
| 17***96 | Bracket-Mounting | 1 |
| 17***97 | Flange | 1 |
103-4777 Electrical Ar
| 10***77 | Electrical Ar | 1 |
| 10***85 | Installation Group-Controls | 1 |
| 10***86 | Battery Group | 1 |
104-6585 Installation Gp-Controls
| 10***85 | Installation Group-Controls | 1 |
| 11***95 | Box Group-Junction | 1 |
| 11***03 | Harness As-Switch; (Parking Brake) | 1 |
114-4659 Installation Gp-Controls
| 11***26 | Harness As-Pump; (Spray Down)(Spray Down Motor) | 1 |
| 11***59 | Installation Group-Controls | 1 |
| 11***18 | Clip | 1 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
116-8711 Lamp Gp-Warning Beacon
| 03***14 | Screw; (10-32x1-In) | 3 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 11***11 | Lamp Group-Warning Beacon | 1 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
128-6983 Lamp Gp-Warning Beacon -Rotating
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***83 | Lamp Group-Warning Beacon; -Rotating, Amber | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
9x-9556 Lamp Gp-Warning Beacon
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 3 |
| 6V***25 | Nut-Hard; (M6 X 1.0) | 3 |
106-9694 Lighting Gp-Flood
| 10***94 | Lighting Group-Flood | 1 |
| 10***99 | Harness As-Lighting; (Floodlights)(Rear) | 4 |
| 10***29 | Plate | 2 |
170-7071 Motor Gp-Electric
| 09***47 | Brush As | 1 |
| 11***94 | Bell; (Rear) | 1 |
| 11***61 | Bearing | 2 |
106-6610 Motor Gp-Electric
| 09***47 | Brush As | 1 |
| 10***10 | Motor Group-Electric | 1 |
| 11***94 | Bell; (Rear) | 1 |
106-9703 Sensor Gp-Auger
| 10***25 | Support As-Sensor | 2 |
| 10***28 | Clamp | 2 |
| 10***03 | Sensor Group-Auger | 1 |
104-6600 Sensor Gp-Auger
| 10***00 | Sensor Group-Auger | 1 |
| 10***91 | Support As | 2 |
| 10***92 | Sensor Group-Position; -Auger | 2 |
109-0174 Sensor Gp-Position -Grade
| 10***74 | Sensor Group-Position; -Grade | 1 |
| 15***83 | Arm As-Grade Sensor | 1 |
| 15***87 | Shoe As | 1 |
109-0192 Sensor Gp-Position -Auger
| 10***92 | Sensor Group-Position; -Auger | 1 |
| 15***54 | Cable | 1 |
| 3H***94 | Setscrew-Socket | 2 |
284-8876 Sensor Gp-Position
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 28***76 | Sensor Group-Position | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
209-7200 Starting Aid Gp -Heater
| 03***59 | Plug-Start | 1 |
| 20***00 | Starting Aid Group; -Heater | 1 |
106-9043 Starting Aid Gp
| 03***59 | Plug-Start | 1 |
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
152-7787 Starting Aid Gp -Lines
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 10***54 | Clip | 1 |
118-3560 Starting Motor Gp-Electric
| 10***61 | Starting Motor Group-Electric | 1 |
| 11***85 | Ring | 1 |
| 11***60 | Starting Motor Group-Electric | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
172-8660 Switch Gp-Liquid Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
143-2883 Wiring Gp-Engine
| 10***00 | Kit-Connecting Plug; (12-Pin)(Electronic Control) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 10***12 | Seal; (Interface) | 1 |
143-3505 Wiring Gp-Engine
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***26 | Box As | 1 |
187-6534 Wiring Gp-Engine
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***26 | Box As | 1 |
104-6587 Wiring Gp-Hydraulic Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***87 | Wiring Group-Hydraulic Control | 1 |
| 10***51 | Plug | 1 |
Engine Arrangement
130-4805 Engine Ar
| 10***23 | Flywheel Group | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
| 13***05 | Engine Ar | 1 |
6i-3595 Engine Ar
| 10***63 | Manifold Group-Exhaust | 1 |
| 10***23 | Flywheel Group | 1 |
| 10***76 | Filter Group-Fuel | 1 |
103-4782 Engine Ar
| 10***82 | Engine Ar | 1 |
| 10***29 | Exhaust Group | 1 |
| 10***36 | Mounting Group-Engine | 1 |
143-2882 Engine Ar
| 10***36 | Mounting Group-Engine | 1 |
| 10***40 | Cooling Group-Supplemental | 1 |
| 10***49 | Drive Group-Pump | 1 |
226-6468 Engine Ar-Primary
| 10***23 | Flywheel Group | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
| 13***66 | Housing Group-Flywheel | 1 |
Feeder Drag And Auger Conveyors
102-6331 Actuator Gp-Power
| 10***31 | Actuator Group-Power; -Custom | 1 |
| 11***29 | Kit-Seal; (Power Actuator) | 1 |
| 11***81 | Kit-Gear; (Power Actuator) | 1 |
106-9718 Bearing Gp-Auger
| 01***41 | Setscrew-Socket | 3 |
| 10***18 | Bearing Group-Auger | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
116-9509 Bearing Gp-Auger
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***09 | Bearing Group-Auger | 1 |
106-9688 Bearing Gp-Auger
| 10***11 | Fitting | 1 |
| 10***88 | Bearing Group-Auger | 1 |
| 10***18 | Bearing Group-Auger | 1 |
106-9717 Bearing Gp-Auger
| 10***17 | Bearing Group-Auger | 1 |
| 11***94 | Bearing-Insert | 1 |
| 19***77 | Shield | 1 |
201-5584 Bearing Gp-Auger
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
| 20***84 | Bearing Group-Auger | 1 |
108-0339 Chain Gp-Conveyor
| 10***39 | Chain Group-Conveyor | 1 |
| 8I***54 | Chain Group-Conveyor | 2 |
8i-0854 Chain Gp-Conveyor
| 8I***14 | Bar-Side | 56 |
| 8I***15 | Bar-Side | 28 |
| 8I***16 | Bar-Side | 112 |
103-4783 Conveyor Ar-Drag & Auger
| 10***83 | Conveyor Ar-Drag & Auger | 1 |
| 10***99 | Conveyor Group-Auger | 1 |
| 11***61 | Footshaft Group | 2 |
125-0002 Conveyor Gp-Auger
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 2 |
| 05***94 | Chain-Roller; (45 Links) | 0 |
| 06***66 | Bolt; (3/4-10x1.642-In) | 12 |
186-3636 Conveyor Gp-Auger
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 2 |
| 06***66 | Bolt; (3/4-10x1.642-In) | 6 |
| 10***55 | Plate | 1 |
228-9064 Conveyor Gp-Auger
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 2 |
| 06***66 | Bolt; (3/4-10x1.642-In) | 6 |
| 10***55 | Plate | 1 |
104-6599 Conveyor Gp-Auger
| 06***66 | Bolt; (3/4-10x1.642-In) | 6 |
| 07***87 | Ring-Retaining | 4 |
| 10***30 | Support As-Auger | 1 |
8i-0822 Conveyor Gp-Drag
| 05***20 | Pin-Spring | 56 |
| 10***39 | Chain Group-Conveyor | 1 |
| 12***46 | Bar-Feeder | 28 |
8i-0852 Drive Gp-Conveyor -Drag Conveyor
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 08***43 | Gear-Cluster | 3 |
8i-0866 Drive Gp-Conveyor
| 08***44 | Gear-Input | 1 |
| 08***83 | Washer; (Thrust) | 1 |
| 09***78 | Pin-Spring | 3 |
5e-9809 Extension Gp-Auger -1-Ft, Rh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 5E***09 | Extension Group-Auger; -1-Ft, Rh | 1 |
5e-9808 Extension Gp-Auger -1-Ft, Lh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 5E***08 | Extension Group-Auger; -1-Ft, Lh | 1 |
5e-9825 Extension Gp-Auger -2-Ft, Lh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 5E***25 | Extension Group-Auger; -2-Ft, Lh | 1 |
1g-9347 Extension Gp-Auger -6 In
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 1G***48 | Tube | 2 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 2 |
5e-9826 Extension Gp-Auger -2-Ft, Rh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 5E***26 | Extension Group-Auger; -2-Ft, Rh | 1 |
111-8261 Footshaft Gp
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
122-0702 Footshaft Gp
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
120-6675 Gate Gp-Feeder
| 10***31 | Actuator Group-Power; -Custom | 2 |
| 10***32 | Gate As | 2 |
| 11***33 | Pin | 2 |
8i-0861 Guard Gp-Feeder
| 03***82 | Screw; (3/8-16x2-In) | 16 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 12 |
| 11***28 | Deflector As | 1 |
104-6594 Lines Gp-Lubrication
| 10***94 | Lines Group-Lubrication | 1 |
| 10***09 | Tube As | 1 |
| 10***10 | Tube As | 1 |
228-4130 Shaft Gp-Feeder Drive
| 03***21 | Bolt-Allen Hd; (3/8unc X 1) | 4 |
| 10***30 | Bearing-Flange | 1 |
| 10***70 | Key-Square | 1 |
8i-0801 Shaft Gp-Feeder Drive
| 01***97 | Setscrew-Socket | 1 |
| 02***97 | Setscrew; (3/8-16x1.75-In) | 1 |
| 03***21 | Bolt-Allen Hd; (3/8unc X 1) | 4 |
128-5978 Shaft Gp-Feeder Drive
| 03***21 | Bolt-Allen Hd; (3/8unc X 1) | 4 |
| 10***30 | Bearing-Flange | 1 |
| 10***70 | Key-Square | 1 |
Frame And Body
197-5298 Arm Gp-Drop
| 11***99 | Pin As-Pivot | 2 |
| 13***20 | Shaft | 2 |
| 13***77 | Lockout | 2 |
123-2262 Arm Gp-Tow
| 03***53 | Ring-Retaining | 2 |
| 05***74 | Pin | 2 |
| 10***64 | Plate | 4 |
109-1350 Arm Gp-Tow
| 03***53 | Ring-Retaining | 2 |
| 05***74 | Pin | 2 |
| 10***64 | Plate | 4 |
8i-0971 Arm Gp-Tow
| 03***83 | Spacer | 16 |
| 03***53 | Ring-Retaining | 2 |
| 05***74 | Pin | 2 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
119-0133 Brace Gp-Frame
| 10***89 | Brace Group | 1 |
| 11***33 | Brace Group-Frame | 1 |
| 11***19 | Bracket Group-Support | 1 |
119-3819 Bracket Gp-Support
| 06***66 | Bolt; (3/4-10x1.642-In) | 2 |
| 11***19 | Bracket Group-Support | 1 |
| 11***52 | Plate | 1 |
109-2722 Bracket Gp-Support
| 06***66 | Bolt; (3/4-10x1.642-In) | 2 |
| 10***22 | Bracket Group-Support | 1 |
| 11***52 | Plate | 1 |
206-6689 Carriage Gp-Extender
| 18***25 | Scraper; (Brass) | 4 |
| 19***57 | Scraper As | 4 |
| 1A***68 | Nut | 6 |
143-3502 Cover Gp-Engine & Platform
| 03***72 | Bolt; (3/8-16-Thd) | 18 |
| 10***20 | Plate | 2 |
| 10***50 | Plate | 1 |
104-4290 Cover Gp-Engine & Platform
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 8 |
| 03***72 | Bolt; (3/8-16-Thd) | 10 |
| 10***20 | Plate | 2 |
150-1904 Cover Gp-Paver Ventilation
| 14***86 | Panel As; (Rh) | 1 |
| 15***04 | Cover Group-Paver Ventilation | 1 |
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 4 |
150-1905 Cover Gp-Platform
| 14***60 | Plate | 1 |
| 15***05 | Cover Group-Platform | 1 |
| 15***12 | Panel As-Rh | 1 |
206-6699 Deflector Gp
| 16***24 | Rod-Threaded | 4 |
| 16***25 | Rod-Threaded | 4 |
| 16***26 | Turnbuckle | 4 |
110-1530 Deflector Gp
| 11***30 | Deflector Group | 1 |
| 12***50 | Plate | 1 |
| 12***51 | Plate | 1 |
106-9713 Extension Gp-Main Frame
| 10***13 | Extension Group-Main Frame | 1 |
| 10***86 | Extension As | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 3 |
106-9714 Extension Gp-Main Frame -1 Ft
| 10***14 | Extension Group-Main Frame; -1 Ft | 1 |
| 10***88 | Extension As | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 3 |
186-3637 Extension Gp-Main Frame
| 12***78 | Bar | 2 |
| 12***20 | Shim; (1.65-mm Thk) | 4 |
| 12***63 | Extension As-Main Frame | 2 |
106-9715 Extension Gp-Main Frame -2 Ft
| 10***15 | Extension Group-Main Frame; -2 Ft | 1 |
| 10***90 | Extension As | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 3 |
215-7553 Extension Gp-Main Frame
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
116-2470 Extension Gp-Main Frame
| 06***66 | Bolt; (3/4-10x1.642-In) | 6 |
| 11***70 | Extension Group-Main Frame | 1 |
| 12***78 | Bar | 2 |
125-5550 Frame Gp-Main
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 2 |
| 12***50 | Frame Group-Main | 1 |
| 12***55 | Frame As; (Rh) | 1 |
140-8380 Frame Gp-Main
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 2 |
| 12***55 | Frame As; (Rh) | 1 |
| 14***80 | Frame Group-Main | 1 |
206-6690 Frame Gp-Screed
| 10***68 | Grip-Handle | 2 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 6 |
| 10***82 | Scale; (Rh)(Screed Ext) | 1 |
216-6989 Gate Gp-End
| 10***68 | Grip-Handle | 2 |
| 10***35 | Support As | 2 |
| 10***09 | Chain; (14-In Each) | 0 |
168-0232 Guard Gp-Deflector
| 16***99 | Guard; (Lh) | 1 |
| 16***00 | Guard; (Rh) | 1 |
| 16***09 | Deflector | 1 |
104-6579 Guide Gp-Steering
| 03***74 | Keeper | 1 |
| 10***79 | Guide Group-Steering | 1 |
| 10***39 | Tube As | 1 |
104-6578 Hopper Gp
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 4 |
| 10***49 | Pin As | 2 |
| 10***68 | Hopper As | 1 |
172-3960 Hopper Gp
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 10***53 | Plate | 1 |
| 10***54 | Plate | 1 |
150-1903 Installation Ar-Platform Cover
| 15***03 | Installation Ar-Platform Cover | 1 |
| 15***05 | Cover Group-Platform | 1 |
173-7691 Kit-Hopper
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 16***85 | Pin As | 2 |
| 16***87 | Tube | 10 |
206-6695 Plate Gp-Screed -Diesel Heat
| 18***31 | Bolt-Special; (1 1/4-12-2athd) | 4 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 20***95 | Plate Group-Screed; -Diesel Heat | 1 |
118-7295 Step Gp
| 11***15 | Step As | 1 |
| 11***34 | Bracket As; (Rh) | 1 |
| 11***03 | Bracket As; (Lh) | 1 |
103-4779 Structural Ar
| 10***79 | Structural Ar | 1 |
| 10***41 | Support Group-Tow Arm | 1 |
| 10***90 | Cover Group-Engine & Platform | 1 |
169-5471 Support Gp-Frame
| 10***89 | Brace Group | 1 |
| 10***22 | Bracket Group-Support | 1 |
| 16***71 | Support Group-Frame | 1 |
103-7341 Support Gp-Tow Arm
| 05***35 | Rod | 1 |
| 06***35 | Lock Pin | 2 |
| 10***41 | Support Group-Tow Arm | 1 |
121-6173 Support Gp-Tow Arm
| 06***35 | Lock Pin | 2 |
| 10***42 | Bar | 1 |
| 12***73 | Support Group-Tow Arm | 1 |
150-1900 Ventilation Gp-Paver
| 14***01 | Lines Group-Paver Ventilation | 1 |
| 14***02 | Ventilation Group-Paver | 1 |
| 15***00 | Ventilation Group-Paver | 1 |
149-5254 Ventilation Gp-Paver
| 03***72 | Bolt; (3/8-16-Thd) | 2 |
| 10***39 | Key-Square | 1 |
| 10***56 | Rod; (Prop) | 1 |
148-5502 Ventilation Gp-Paver
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***57 | Plate | 1 |
Fuel System
206-6693 Burner Gp -Diesel Heat
| 03***12 | Screw-Forming; (10-24x0.5-In) | 16 |
| 10***98 | . Roller (With Bushing), Housing-Blower | 4 |
| 10***25 | Adapter | 4 |
148-5456 Filter Gp-Fuel
| 03***47 | Ferrule | 1 |
| 03***14 | Nut; (7/16-In) | 1 |
| 06***68 | Nut-Fuel Line; (1/2-In) | 4 |
101-3376 Filter Gp-Fuel
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
| 10***76 | Filter Group-Fuel | 1 |
| 13***96 | Filter Group-Fuel | 1 |
138-3096 Filter Gp-Fuel
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
130-4646 Fitting Gp-Fuel Lines
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
8l-3471 Joint As-Tube
| 8L***71 | Joint As-Tube | 1 |
| 9X***36 | Seal | 2 |
101-3900 Lines Gp-Fuel Filter
| 03***47 | Ferrule | 1 |
| 03***81 | Nut; (7/16-24-Thd) | 2 |
| 03***93 | Ferrule | 2 |
101-4381 Lines Gp-Fuel Injection
| 03***25 | Elbow | 1 |
| 03***73 | Washer; (10.01x20.85x2.03-mm Thk) | 4 |
| 06***64 | Fitting-Flared | 1 |
192-4302 Pump Gp-Fuel
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
| 13***76 | Strainer; (Fuel Pump) | 1 |
1g-7988 Pump Gp-Fuel
| 10***60 | Plug | 1 |
| 1G***88 | Pump Group-Fuel | 1 |
| 5E***40 | Plug-By-Pass | 1 |
137-2525 Pump Gp-Fuel
| 13***25 | Pump Group-Fuel | 1 |
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
186-5380 Pump Gp-Fuel Injection
| 03***25 | Elbow | 1 |
| 06***64 | Fitting-Flared | 1 |
| 06***65 | Fitting-Brass | 1 |
114-4340 Pump Gp-Fuel Injection
| 10***97 | Kit-Solenoid; (Shutoff)(Fuel) | 1 |
| 11***64 | Housing | 1 |
| 11***70 | Bolt | 2 |
142-5071 Pump Gp-Fuel Injection
| 03***25 | Elbow | 1 |
| 06***64 | Fitting-Flared | 1 |
| 06***65 | Fitting-Brass | 1 |
101-4358 Pump Gp-Fuel Injection
| 06***06 | Seal | 1 |
| 10***77 | Stud | 3 |
| 10***78 | Gear; (56-Teeth) | 1 |
101-4359 Pump Gp-Fuel Injection
| 10***97 | Kit-Solenoid; (Shutoff)(Fuel) | 1 |
| 10***59 | Pump Group-Fuel Injection | 1 |
| 11***64 | Housing | 1 |
114-4341 Pump Gp-Fuel Injection
| 06***06 | Seal | 1 |
| 10***77 | Stud | 3 |
| 10***78 | Gear; (56-Teeth) | 1 |
149-5459 Pump Gp-Fuel Injection
| 11***45 | Nut | 1 |
| 13***96 | Locknut | 1 |
| 14***59 | Pump Group-Fuel Injection | 1 |
149-5380 Pump Gp-Fuel Transfer
| 08***68 | Spacer | 1 |
| 13***25 | Pump Group-Fuel | 1 |
| 14***80 | Pump Group-Fuel Transfer | 1 |
101-3782 Pump Gp-Fuel Transfer
| 03***37 | Kit-Pump; (Fuel Transfer) | 1 |
| 10***82 | Pump Group-Fuel Transfer | 1 |
| 12***20 | Pump Group-Fuel Transfer | 1 |
131-4817 Tank & Pump Gp-Fuel
| 06***01 | Nut-Special | 1 |
| 07***84 | Clamp | 1 |
| 08***68 | Spacer | 1 |
114-9444 Tank & Pump Gp-Fuel
| 06***01 | Nut-Special | 1 |
| 07***84 | Clamp | 1 |
| 08***68 | Spacer | 1 |
Grade References
200-0738 Gauge Gp-Indicator -Tow Point
| 17***32 | Film-Identification; (Tow Point Indicator) | 2 |
| 20***38 | Gauge Group-Indicator; -Tow Point | 1 |
| 20***40 | Plate | 2 |
109-5624 Leveler Gp -30 Ft Over Screed
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5626 Leveler Gp -Outboard
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5622 Leveler Gp -40 Ft Outboard
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5625 Leveler Gp -30 Ft Over Screed
| 08***09 | Bracket | 7 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5623 Leveler Gp -30 Ft Outboard
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5627 Leveler Gp -40 Ft Grade
| 10***04 | Tube; (1.1-M) | 1 |
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5628 Leveler Gp -30 Ft Grade
| 10***04 | Tube; (1.1-M) | 1 |
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
Hydraulic System
077-3951 Cap Gp-Hydraulic Oil Filler
| 07***51 | Cap As-Filler Breather | 1 |
| 07***32 | Filter Element-Breather; (Hydraulic Oil Filter) | 1 |
| 07***26 | Gasket | 2 |
108-2160 Cooler Gp-Hydraulic Oil
| 10***75 | Tube As | 1 |
| 10***76 | Tube As | 1 |
| 10***60 | Cooler Group-Hydraulic Oil | 1 |
8c-8002 Cylinder Gp-Hydraulic -Steering
| 03***31 | Ring-Back-Up | 2 |
| 1H***28 | Seal 6.3 cm(2.484 In.) I.D.; Seal--To Seal Pumps To Case | 1 |
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 1 |
107-0473 Cylinder Gp-Hydraulic
| 03***39 | Ring-Back-Up | 1 |
| 09***29 | Lockwire | 1 |
| 10***73 | Cylinder Group-Hydraulic | 1 |
174-3072 Cylinder Gp-Hydraulic -Auger, Rh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 07***85 | Washer | 1 |
| 11***60 | Shim; (3-mm Thk) | 1 |
203-4273 Cylinder Gp-Hydraulic -Screed Hoist
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 20***73 | Cylinder Group-Hydraulic; -Screed Hoist | 1 |
| 23***05 | Kit-Seal; (Screed Hoist Cylinder) | 1 |
135-0220 Cylinder Gp-Hydraulic -Hopper
| 13***20 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 13***21 | Kit-Seal; (Hopper Cylinder) | 1 |
| 5E***32 | Ring | 1 |
115-5207 Cylinder Gp-Hydraulic
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 07***69 | Fitting, Grease | 1 |
| 08***25 | Ring; (Backup) | 1 |
8i-0938 Cylinder Gp-Hydraulic
| 10***52 | Seal-Wiper | 1 |
| 10***53 | Plug-Nylon | 1 |
| 11***46 | Ring | 1 |
174-3073 Cylinder Gp-Hydraulic -Auger, Lh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 17***73 | Cylinder Group-Hydraulic; -Auger, Lh | 1 |
| 17***07 | Kit-Seal; (Hydraulic Cylinder) | 1 |
135-9444 Cylinder Gp-Hydraulic -Tow Point
| 13***44 | Cylinder Group-Hydraulic; -Tow Point | 1 |
| 17***34 | Kit-Seal; (Towpoint Cylinder) | 1 |
| 17***36 | Ring-Wear | 1 |
203-4276 Cylinder Gp-Hydraulic -Auger Hoist, Lh
| 20***76 | Cylinder Group-Hydraulic; -Auger Hoist, Lh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 25***75 | Kit-Seal; (Auger Hoist) | 1 |
206-6682 Cylinder Gp-Hydraulic -Extender
| 20***62 | Kit-Seal; (Extender Cylinder) | 0 |
| 20***82 | Cylinder Group-Hydraulic; -Extender | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
197-9766 Cylinder Gp-Hydraulic -Slope
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 14***61 | Plug | 2 |
| 14***62 | Seal-Washer | 2 |
203-4275 Cylinder Gp-Hydraulic -Auger Hoist, Rh
| 20***75 | Cylinder Group-Hydraulic; -Auger Hoist, Rh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 24***14 | Kit-Seal; (Auger Hoist) | 1 |
8i-0992 Cylinder Gp-Hydraulic
| 03***39 | Ring-Back-Up | 1 |
| 10***51 | Seal-Polypak | 1 |
| 10***52 | Seal-Wiper | 1 |
133-0959 Cylinder Gp-Hydraulic
| 03***39 | Ring-Back-Up | 1 |
| 09***29 | Lockwire | 1 |
| 11***11 | Kit-Seal | 1 |
102-8972 Filter Gp-Oil
| 01***42 | Screw-Machine; (6/32x1-In) | 2 |
| 08***94 | Indicator As | 1 |
| 10***72 | Filter Group-Oil | 1 |
7x-5312 Filter Gp-Oil -Hydraulic
| 14***91 | Filter-Oil; (Advanced Efficiency) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 7X***12 | Filter Group-Oil; -Hydraulic | 1 |
7x-9958 Filter Gp-Oil
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 05***15 | Gasket | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 17***15 | Filter Group-Oil; -Hydraulic Tank | 1 |
103-4778 Hydraulic Ar
| 10***78 | Hydraulic Ar | 1 |
| 10***94 | Lines Group-Lubrication | 1 |
| 10***41 | Tank Group-Hydraulic | 1 |
133-5342 Indicator Gp-Oil Filter Change
| 13***42 | Indicator Group-Oil Filter Change; -Hydraulic | 1 |
| 15***51 | Seal-O-Ring | 2 |
| 16***39 | Screw | 2 |
108-2158 Lines Gp-Auger
| 10***06 | Pin | 2 |
| 10***79 | Pin | 2 |
| 10***82 | Hose As | 1 |
108-2156 Lines Gp-Auxiliary Hydraulic
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 10***01 | Pin As | 2 |
| 10***99 | Pump Group-Gear | 1 |
108-2155 Lines Gp-Conveyor
| 10***72 | Filter Group-Oil | 1 |
| 10***43 | Plate | 1 |
| 10***42 | Reducer | 2 |
228-4132 Lines Gp-Conveyor
| 10***38 | Clamp-Half | 10 |
| 10***43 | Plate | 1 |
| 10***42 | Hose As | 1 |
206-6691 Lines Gp-Extender
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 14***18 | Connector As | 2 |
| 14***74 | Elbow As | 2 |
108-2161 Lines Gp-Grade & Slope
| 10***02 | Valve Group-Solenoid | 2 |
| 10***61 | Lines Group-Grade & Slope | 1 |
| 10***02 | Tube As | 2 |
228-6315 Lines Gp-Hopper
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 10***01 | Pin As | 2 |
| 10***44 | Elbow | 1 |
148-5501 Lines Gp-Paver Ventilation
| 10***39 | Key-Square | 1 |
| 14***49 | Hose As | 1 |
| 14***51 | Valve-Flow Control; (Blower Motor) | 1 |
197-5285 Lines Gp-Slope
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***84 | Pin As | 4 |
108-2159 Lines Gp-Steering
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 07***43 | Steering Column Group | 1 |
| 10***49 | Plate | 1 |
108-2198 Lines Gp-Truck Hitch
| 08***73 | Clamp | 4 |
| 10***02 | Valve Group-Solenoid | 1 |
| 10***11 | Tube As | 1 |
133-8685 Lines Gp-Truck Hitch
| 03***82 | Screw; (3/8-16x2-In) | 2 |
| 08***73 | Clamp | 4 |
| 10***02 | Valve Group-Solenoid | 1 |
206-6692 Lines Gp-Vibratory
| 10***05 | Plate | 7 |
| 14***09 | Adapter As | 2 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
197-1728 Motor Gp-Gear -Blower Fan
| 16***39 | Shim; (1.75-mm Thk) | 1 |
| 19***28 | Motor Group-Gear; -Blower Fan | 1 |
| 1F***22 | Bearing (.500" Long) | 4 |
8i-0721 Motor Gp-Gerotor -Vibratory
| 06***39 | Seal-O-Ring | 1 |
| 16***21 | Kit-Bearing; (Vibratory Motor) | 1 |
| 4D***86 | Seal--Bushing To Selector Valve Group | 1 |
6r-4097 Motor Gp-Piston -Propel
| 08***37 | Spring | 9 |
| 08***67 | Seal-O-Ring | 1 |
| 08***61 | Plate As. | 1 |
8i-0788 Motor Gp-Piston -Propel
| 03***20 | Ring | 4 |
| 07***53 | Pin; (Spring) | 4 |
| 10***83 | Bearing | 2 |
223-0581 Motor Gp-Piston -Drag Conveyor
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
175-7933 Motor Gp-Piston
| 11***21 | Plug-Special | 2 |
| 11***22 | Spring | 2 |
| 17***33 | Motor Group-Piston | 1 |
8i-0843 Motor Gp-Piston
| 1G***74 | Piston | 7 |
| 1G***75 | Guide-Slipper | 1 |
| 1J***74 | Ring-Retaining | 2 |
223-0583 Motor Gp-Piston -Auger Conveyor
| 11***21 | Plug-Special | 2 |
| 11***22 | Spring | 2 |
| 12***13 | Gasket-End Cap | 1 |
240-7317 Pump & Mtg Gp-Screed Vibratory
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
| 14***44 | Connector Group | 1 |
| 14***73 | Elbow Group | 1 |
8c-7616 Pump Gp-Piston
| 03***08 | Spring | 1 |
| 03***88 | Bolt-12 Point Head; (3/8-16x1.125-In) | 2 |
| 07***75 | Shim | 1 |
104-4199 Pump Gp-Gear
| 10***99 | Pump Group-Gear | 1 |
| 11***64 | Kit-Valve Seal | 1 |
| 13***93 | Kit-Pump Seal | 1 |
226-2451 Pump Gp-Gear -Screed
| 22***51 | Pump Group-Gear; -Screed | 1 |
| 24***29 | Kit-Seal; (Screed Gear Pump) | 1 |
| 24***41 | Kit-Solenoid Valve; (Screed Gear Pump) | 1 |
8i-0988 Pump Gp-Metering
| 03***33 | Bolt | 7 |
| 05***50 | Seal | 3 |
| 07***23 | Seal | 1 |
8i-0838 Pump Gp-Piston
| 03***04 | Key | 1 |
| 03***05 | Seal-O-Ring | 2 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
8i-0836 Pump Gp-Piston -Auxiliary
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 2 |
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 8 |
| 05***33 | Seal | 1 |
8i-0839 Pump Gp-Piston
| 03***04 | Key | 1 |
| 03***05 | Seal-O-Ring | 2 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
143-2872 Pump Gp-Piston -Drag Conveyor, Auger Conveyor
| 07***75 | Shim | 1 |
| 08***98 | Cover-Gerotor | 1 |
| 08***02 | Plug-Orifice | 2 |
9t-2031 Rotating Gp-Pump
| 00***83 | Ring-Snap | 1 |
| 9T***31 | Rotating Group-Pump; -Steering, Pilot | 1 |
| 9T***57 | Pin | 3 |
110-6347 Tank Gp-Hydraulic
| 07***51 | Cap As-Filler Breather | 1 |
| 10***40 | Tank As-Hydraulic | 1 |
| 10***30 | Cover As | 1 |
107-9341 Tank Gp-Hydraulic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***41 | Tank Group-Hydraulic | 1 |
| 10***87 | Hose As | 1 |
8i-0973 Valve Gp-Bank
| 08***83 | Body | 3 |
| 08***85 | Spring | 6 |
| 08***86 | Washer | 6 |
134-4721 Valve Gp-Bank -Auger Hoist, Screed Hoist
| 08***80 | Case As | 6 |
| 08***83 | Body | 3 |
| 08***85 | Spring | 6 |
208-1631 Valve Gp-Control -Vibratory
| 19***47 | Valve Group-Control; (Vibratory) | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
103-4924 Valve Gp-Control -Propel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***24 | Valve Group-Control; -Propel | 1 |
| 10***18 | Coil | 5 |
118-8396 Valve Gp-Counterbalance
| 11***77 | Hose As | 2 |
| 11***96 | Valve Group-Counterbalance | 1 |
| 14***16 | Connector Group | 1 |
169-0166 Valve Gp-Counterbalance
| 07***27 | Kit-Seal; (Counterbalance Valve) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 12***16 | Solenoid As | 2 |
190-4168 Valve Gp-Flow Control
| 19***68 | Valve Group-Flow Control | 1 |
| 19***01 | Coil | 1 |
| 20***76 | Kit-Seal; (Flow Control Valve)(Front Wheel Assist) | 1 |
132-7429 Valve Gp-Manifold
| 13***29 | Valve Group-Manifold | 1 |
| 13***92 | Valve-Solenoid | 1 |
| 13***93 | Valve-Relief | 1 |
257-5145 Valve Gp-Pump Control -Auxiliary Pump
| 25***45 | Valve Group-Pump Control; -Auxiliary Pump | 1 |
| 4J***33 | Seal Fuel Injection Pump | 1 |
| 5L***58 | Seal 14 mm(.551 In.) I. D. | 1 |
1g-6319 Valve Gp-Solenoid
| 03***28 | Seal-O-Ring | 2 |
| 08***90 | Seal-O-Ring | 2 |
| 1G***19 | Valve Group-Solenoid | 1 |
103-3602 Valve Gp-Solenoid -Extender, Slope
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 1 |
| 11***21 | Coil | 2 |
103-1902 Valve Gp-Solenoid
| 08***83 | Body | 1 |
| 08***85 | Spring | 2 |
| 08***86 | Washer | 2 |
197-5294 Vibratory Gp
| 10***90 | Coupling | 4 |
| 10***95 | Bearing | 8 |
| 10***39 | Key-Square | 4 |
Implements
106-3482 Extension Ar -Diesel Heat, 12-In
| 10***51 | Harness As-Screed; (Extension) | 1 |
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 5 |
106-3483 Extension Ar -Diesel Heat, 28-In
| 10***52 | Harness As-Screed; (Extension) | 1 |
| 10***83 | Extension Ar; -Diesel Heat, 28-In | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 8 |
185-5433 Extension Ar-Auger
| 18***33 | Extension Ar-Auger | 1 |
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 21***53 | Extension Group-Main Frame | 4 |
206-6724 Extension Ar-Screed -20-Ft
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 10***15 | Extension Group-Main Frame; -2 Ft | 2 |
| 11***09 | Bearing Group-Auger | 2 |
206-6726 Extension Ar-Screed -18-Ft
| 10***14 | Extension Group-Main Frame; -1 Ft | 2 |
| 10***15 | Extension Group-Main Frame; -2 Ft | 2 |
| 11***09 | Bearing Group-Auger | 2 |
122-0604 Extension Ar-Screed -17-Ft 6-In
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 2 |
| 12***04 | Extension Ar-Screed; -17-Ft 6-In | 1 |
| 1G***47 | Extension Group-Auger; -6 In | 1 |
150-7725 Extension Ar-Screed -20-Ft 2-In
| 10***83 | Extension Ar; -Diesel Heat, 28-In | 2 |
| 10***88 | Bearing Group-Auger | 2 |
| 10***89 | Brace Group | 2 |
206-6725 Extension Ar-Screed -16-Ft
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 11***09 | Bearing Group-Auger | 2 |
| 16***71 | Support Group-Frame | 2 |
185-5419 Extension Gp-Screed -Diesel Heat, 12-In
| 18***19 | Extension Group-Screed; -Diesel Heat, 12-In | 1 |
| 1A***68 | Nut | 4 |
| 20***59 | Plate | 1 |
8i-0520 Extension Gp-Screed -Diesel Heat, 12-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
8i-0521 Extension Gp-Screed -Diesel Heat With Vibration, 28-In
| 10***95 | Bearing | 2 |
| 10***12 | Shaft As-Vibratory | 1 |
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
185-5408 Extension Gp-Screed -Diesel Heat, 24-In
| 10***95 | Bearing | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
133-2874 Hitch Ar-Truck
| 13***74 | Hitch Ar-Truck | 1 |
| 13***82 | Hitch Group-Truck | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
111-1370 Hitch Ar-Truck
| 11***68 | Hitch Group-Truck | 1 |
| 11***70 | Hitch Ar-Truck | 1 |
| 1D***18 | Nut-Plt-Jam; (5/8unc) | 1 |
111-1368 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***28 | Arm As | 2 |
171-3451 Hitch Gp-Truck
| 16***76 | Hitch Group-Truck; -Oscillating | 1 |
| 17***51 | Hitch Group-Truck | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
166-7676 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
133-8682 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
180-9348 Indicator Gp-Depth
| 17***32 | Film-Identification; (Tow Point Indicator) | 2 |
| 17***73 | Plate | 2 |
| 17***33 | Bar | 2 |
106-9665 Installation Ar-Truck Hitch
| 10***65 | Installation Ar-Truck Hitch | 1 |
| 10***98 | Lines Group-Truck Hitch | 1 |
| 11***70 | Hitch Ar-Truck | 1 |
112-0897 Roller Ar-Push
| 11***96 | Roller Group-Push | 1 |
| 11***97 | Roller Ar-Push | 1 |
| 5C***66 | Bolt (25 mm Long); (5/8-11x1-In) | 1 |
112-0896 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 10***64 | Shaft As | 2 |
| 11***95 | Roller As | 1 |
112-1276 Shaft Gp-Drive -Eccentric Weight
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 11***76 | Shaft Group-Drive; -Eccentric Weight | 1 |
| 24***28 | Seal | 1 |
Lubrication System
6i-4038 Filler Gp-Engine Oil
| 6I***17 | Bolt; (M8x1.25x20-mm) | 1 |
| 6I***12 | Gasket | 1 |
| 6I***13 | Cap; (Engine Oil Filler) | 1 |
101-3448 Fumes Disposal Gp
| 10***48 | Fumes Disposal Group | 1 |
| 10***49 | Hose; (Crankcase Breather) | 1 |
| 5C***09 | Piece-Distance; (Distance) | 1 |
106-8844 Gauge Gp-Oil Level (Dipstick)
| 10***37 | Bracket | 1 |
| 10***44 | Gauge Group-Oil Level (Dipstick) | 1 |
| 13***11 | Gauge As-Oil Level (Dipstick); (Engine) | 1 |
106-8918 Lines Gp-Engine Oil
| 06***13 | Gasket | 1 |
| 10***61 | Bolt; (M10x1.50x50-mm) | 1 |
| 10***15 | Bolt | 3 |
6i-0911 Pump Gp-Engine Oil
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 12***94 | Shaft | 1 |
138-8421 Pump Gp-Engine Oil
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 10***61 | Bolt; (M10x1.50x50-mm) | 1 |
Machine Arrangement
109-5681 Common Ar
| 10***77 | Electrical Ar | 1 |
| 10***78 | Hydraulic Ar | 1 |
| 10***79 | Structural Ar | 1 |
103-4776 Common Ar
| 10***76 | Common Ar | 1 |
| 10***77 | Electrical Ar | 1 |
| 10***78 | Hydraulic Ar | 1 |
206-6700 Screed Ar
| 19***85 | Lines Group-Slope | 1 |
| 19***88 | Crown Group | 1 |
| 19***94 | Vibratory Group | 1 |
Operator Station
103-4781 Console Ar
| 10***81 | Console Ar | 1 |
| 10***80 | Console Group-Operator | 1 |
| 14***95 | Console Group-Operator | 1 |
104-6580 Console Gp-Operator
| 01***70 | Setscrew | 2 |
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 4 |
| 03***49 | Nut-Self Lock; (No.10.Unc) | 4 |
144-3995 Console Gp-Operator
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 01***70 | Setscrew | 2 |
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 4 |
114-0322 Gauge Gp-Cluster
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***22 | Gauge Group-Cluster | 1 |
| 11***81 | Kit-Gauge Housing | 1 |
104-6589 Horn & Alarm Gp
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***89 | Horn & Alarm Group | 1 |
| 11***04 | Harness As-Alarm; (Backup) | 1 |
155-3527 Horn Gp-Electric
| 15***27 | Horn Group-Electric | 1 |
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 3 |
132-9382 Lever Gp-Propel
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
219-3004 Panel Gp-Instrument
| 07***00 | Switch As-Toggle; (Starter Engine Battery Charger) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
109-5402 Panel Gp-Instrument
| 07***00 | Switch As-Toggle; (Starter Engine Battery Charger) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 6 |
140-8379 Platform Gp
| 10***47 | Pin | 2 |
| 10***89 | Plate As | 1 |
| 10***56 | Rod; (Prop) | 1 |
108-2848 Platform Gp
| 10***89 | Bearing-Camshaft | 4 |
| 10***67 | Support As | 2 |
| 10***61 | Slide As | 1 |
206-6697 Platform Gp-Operator
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 2 |
| 19***01 | Bracket | 2 |
| 19***03 | Platform As; (Extender) | 2 |
119-1784 Seat Gp
| 11***84 | Seat Group | 1 |
| 19***76 | Kit-Armrest; (Lh) | 1 |
| 19***77 | Kit-Armrest; (Rh) | 1 |
103-7332 Seat Gp
| 10***17 | Post As-Seat | 1 |
| 10***32 | Seat Group | 1 |
| 11***84 | Seat Group | 1 |
103-4786 Seat Gp
| 10***86 | Seat Group | 1 |
| 10***32 | Seat Group | 1 |
114-0891 Umbrella Ar
| 10***41 | Umbrella Group; -Bg-225c | 1 |
| 11***91 | Umbrella Ar | 1 |
| 1V***44 | Knob; (Rear View Mirror) | 1 |
187-6649 Umbrella Gp -Ap-650b
| 18***49 | Umbrella Group; -Ap-650b | 1 |
106-8541 Umbrella Gp
| 10***41 | Umbrella Group; -Bg-225c | 1 |
Power Train
106-9692 Assist Gp-Front Wheel
| 00***31 | Cup-Bearing | 4 |
| 00***43 | Nut | 2 |
| 06***15 | Nut; (1-1/4-12-Thd) | 3 |
162-7569 Brake & Planetary Gp
| 12***80 | Kit-Lining; (Brake, Planetary, Output)(Outbrd.) | 1 |
| 12***81 | Kit-Lining; (Brake, Planetary, Input)(Inbrd.) | 1 |
| 12***85 | Kit-Spring; (Brake, Planetary, Input)(Inbrd.) | 1 |
8i-0765 Final Drive Gp
| 0T***56 | Bolt (2 1/2" Long) | 20 |
| 11***07 | Nut; (3/4-16-Thd) | 10 |
| 12***95 | Mount | 1 |
143-3501 Lines Gp-Propel
| 07***84 | Clamp | 2 |
| 08***83 | Washer; (0.8mm Thk) | 2 |
| 10***21 | Hose As | 1 |
108-2154 Lines Gp-Propel
| 07***84 | Clamp | 2 |
| 10***21 | Hose As | 1 |
| 10***78 | Cylinder As-Hydraulic; (Throttle) | 1 |
128-4090 Manifold Gp-Front Wheel Drive
| 11***59 | Valve-Flow | 1 |
| 11***61 | Valve-Relief; (Front Wheel Assist) | 1 |
| 12***84 | Valve-Check | 2 |
118-8302 Manifold Gp-Front Wheel Drive
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***59 | Valve-Flow | 1 |
| 11***60 | Valve-Relief | 1 |
8i-0729 Planetary Gp-Final Drive
| 11***95 | Cone-Bearing | 1 |
| 11***96 | Cup-Bearing | 1 |
| 11***97 | Cone-Bearing | 1 |
145-0093 Planetary Gp-Final Drive
| 11***95 | Cone-Bearing | 1 |
| 11***96 | Cup-Bearing | 1 |
| 11***97 | Cone-Bearing | 1 |
1g-8609 Support Gp-Motor
| 1G***09 | Support Group-Motor | 1 |
| 1G***10 | Support | 1 |
| 1G***11 | Ring-Snap | 1 |
103-5831 Valve Gp-Differential Lock
| 10***31 | Valve Group-Differential Lock | 1 |
| 11***47 | Valve-Differential | 1 |
| 11***48 | Valve-Solenoid | 1 |
203-9717 Valve Gp-Differential Lock
189-6357 Valve Gp-Differential Lock
| 11***47 | Valve-Differential | 1 |
| 11***48 | Valve-Solenoid | 1 |
| 11***49 | Valve-Shuttle | 1 |
117-7485 Wheel Ar
117-9375 Wheel Ar
| 11***74 | Wheel Group | 2 |
| 11***75 | Wheel Ar | 1 |
180-8058 Wheel Gp
| 11***73 | Wheel As | 1 |
| 18***58 | Wheel Group | 1 |
| 2D***43 | Seal-O-Ring | 1 |
180-8057 Wheel Gp
| 18***57 | Wheel Group | 1 |
| 2D***65 | Seal-O-Ring | 1 |
| 2D***54 | Ring-Lock | 1 |
109-0957 Wheel Gp
| 08***52 | Tire; (22x6x17.75) | 1 |
| 10***56 | Wheel As | 1 |
| 10***57 | Wheel Group | 1 |
117-9374 Wheel Gp
| 10***34 | Extension-Valve | 1 |
| 10***35 | Valve-Rim | 1 |
| 11***74 | Wheel Group | 1 |
8i-0764 Wheel Gp
| 18***57 | Wheel Group | 2 |
| 1K***74 | Valve Group; (Tire Inflation) | 2 |
| 2D***07 | Stud | 1 |
Service Equipment And Supplies
103-4784 Finish Ar
| 10***84 | Finish Ar | 1 |
| 11***04 | Plate & Film Group | 1 |
109-5682 Finish Ar
| 10***82 | Finish Ar | 1 |
| 11***05 | Plate & Film Group | 1 |
7r-4741 Lines Gp-Spray Down
| 08***77 | Adapter | 1 |
| 1G***70 | Extension-Curve | 1 |
| 1G***79 | Hose As | 1 |
110-3204 Plate & Film Gp
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 6 |
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 08***67 | Film-Warning; (No Step)(No Step) | 2 |
110-4805 Plate & Film Gp
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 6 |
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 08***67 | Film-Warning; (No Step)(No Step) | 2 |
226-3637 Plate & Film Gp -English
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
| 08***52 | Decal-Caution, Hopper Support | 2 |
| 11***84 | Film-Notice; (Machine Shipping) | 2 |
206-6694 Plate & Film Gp
| 08***51 | Film-Warning; (Lighting Screed Burner) | 2 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 2 |
| 15***79 | Film-Instruction; (Grease)(Instructions) | 2 |
226-3635 Plate & Film Gp -English
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
| 08***52 | Decal-Caution, Hopper Support | 2 |
| 11***84 | Film-Notice; (Machine Shipping) | 2 |
226-3636 Plate & Film Gp -French
| 15***07 | Film-Notice; (Machine Shipping) | 2 |
| 15***15 | Film-Warning; (Hopper Support) | 2 |
| 15***34 | Film-Warning; (Mounting) | 2 |
Slope And Grade Control
117-8642 Beam Ar-Transverse -10ft Transverse
| 11***42 | Beam Ar-Transverse; -10ft Transverse | 1 |
| 11***43 | Beam As | 1 |
| 11***34 | Mount | 4 |
119-1765 Beam Gp-Transverse
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 10 |
| 08***15 | Cushion-Rubber | 2 |
| 11***65 | Beam Group-Transverse | 1 |
106-9693 Beam Gp-Transverse
| 10***93 | Beam Group-Transverse | 1 |
| 11***44 | Beam As | 1 |
| 11***33 | Plate | 1 |
110-2420 Cable Gp-Control
| 10***20 | Cable As-Rh | 1 |
| 10***21 | Cable As-Lh | 1 |
| 10***22 | Cable As | 2 |
168-6500 Cable Gp-Control -Grade
| 10***63 | Clamp | 1 |
| 11***95 | Plug | 1 |
| 11***63 | Cable; (Coiled) | 1 |
185-4102 Control Ar-Grade
| 10***76 | Mounting Group-Control; -Grade Sensor | 2 |
| 18***60 | Sensor Group-Grade | 1 |
| 18***02 | Control Ar-Grade | 1 |
106-9669 Control Ar-Grade
| 10***69 | Control Ar-Grade | 1 |
| 10***71 | Control Group-Grade | 1 |
| 10***76 | Mounting Group-Control; -Grade Sensor | 2 |
106-9668 Control Ar-Grade & Slope
| 10***68 | Control Ar-Grade & Slope | 1 |
| 10***69 | Control Ar-Grade | 1 |
| 10***72 | Control Group-Grade & Slope | 1 |
106-9671 Control Gp-Grade
| 10***71 | Control Group-Grade | 1 |
| 10***89 | Jack Group-Height Adjuster | 1 |
| 10***91 | Strap | 1 |
108-0042 Control Gp-Grade
| 10***42 | Control Group-Grade | 1 |
| 11***93 | Bracket | 1 |
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
106-9701 Control Gp-Grade & Slope -Grade & Slope
| 08***17 | Support | 1 |
| 10***76 | Mounting Group-Control; -Grade Sensor | 2 |
| 10***01 | Control Group-Grade & Slope; -Grade & Slope | 1 |
190-2533 Control Gp-Grade & Slope
| 08***17 | Support | 1 |
| 10***76 | Mounting Group-Control; -Grade Sensor | 2 |
| 10***76 | Tube-Control | 2 |
209-3130 Control Gp-Grade & Slope
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
| 14***76 | Plug-Connector | 1 |
209-3123 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 10***36 | Cable As | 2 |
| 11***95 | Plug | 1 |
239-2367 Control Gp-Grade & Slope
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
209-3127 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 10***36 | Cable As | 2 |
| 11***95 | Plug | 1 |
187-1848 Control Gp-Grade & Slope
| 08***17 | Support | 1 |
| 10***76 | Mounting Group-Control; -Grade Sensor | 2 |
| 10***31 | Bracket As | 1 |
190-7525 Control Gp-Grade & Slope -Topcon Control System
| 10***94 | Junction Box | 2 |
| 10***98 | Control Group-Grade & Slope | 2 |
| 10***08 | Sensor Group-Grade; (Control) | 2 |
106-9672 Control Gp-Grade & Slope
| 10***72 | Control Group-Grade & Slope | 1 |
| 10***75 | Control-Slope | 1 |
| 11***80 | Cable As | 1 |
106-9676 Mounting Gp-Control -Grade Sensor
| 10***76 | Mounting Group-Control; -Grade Sensor | 1 |
| 13***89 | Support As; (Sensor) | 1 |
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 10 |
185-4061 Sensor Ar-Grade -Premier Control System
| 11***93 | Bracket | 1 |
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 18***44 | Jack Group-Height Adjuster | 1 |
209-3131 Sensor Gp-Grade -Sonic
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
122-0090 Sensor Gp-Grade -Averaging Ski
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 12***99 | Arm-Follower | 1 |
122-0094 Sensor Gp-Grade
| 11***29 | Cap-Dust | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
209-3132 Sensor Gp-Grade -Averaging Ski
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
185-4060 Sensor Gp-Grade
| 10***91 | Strap | 1 |
| 10***74 | Sensor Group-Position; -Grade | 1 |
| 11***80 | Cable As | 1 |
Undercarriage
113-5387 Bogie Gp
| 00***31 | Cup-Bearing | 8 |
| 00***43 | Nut | 4 |
| 06***15 | Nut; (1-1/4-12-Thd) | 3 |
239-2366 Mounting Gp-Averaging Ski
| 23***66 | Mounting Group-Averaging Ski | 1 |
| 28***75 | Collar | 4 |
| 28***77 | Tube | 2 |
103-4780 Undercarriage Ar
| 10***80 | Undercarriage Ar | 1 |
| 8I***65 | Final Drive Group | 2 |
AP-800C serial number reference
On the AP-800C the machine PIN/serial plate is a riveted metal ID plate on the main frame (exact position can vary by build run; check the operator's station area and frame rails if not immediately visible). Read the first 3 characters as the plant/model prefix (1PM or 9AL for this machine) and the following digits as the sequence number for that build run. A separate engine serial plate exists for the 3054 DIT engine and will not match the machine prefix.
| Prefix | Identifies | Notes |
|---|---|---|
| 1PM | AP-800C, Cat-branded, 3054DIT engine | Primary factory prefix for the AP-800C wheel paver (1PM00001-UP), cross-sold under the Barber-Greene BG-230 name after Cat's 1991 acquisition of Barber-Greene. Powered by the 3054 DIT engine, rated about 107 hp (80 kW) at 2200 rpm. Paired with the 9AL range across the same parts groups (hopper, auger conveyor drive, grade-and-slope control, screed vibratory pump, hydraulics). |
| 9AL | AP-800C / Barber-Greene BG-230 companion range | Runs alongside 1PM across the same parts groups (hopper, auger conveyor drive, grade-and-slope control, screed vibratory pump, hydraulics) in factory parts breakdowns, cited as a paired range such as 9AL1-UP; 1PM1-UP, with later breakpoints like 9AL280-UP; 1PM799-UP for some groups. Ties to the same AP-800C/BG-230 model listing as 1PM, not a separate model. Exact production-year split vs 1PM not documented; confirm with dealer. |
Frequently asked questions
What engine does the Caterpillar AP-800C use?
The AP-800C runs the Caterpillar 3054DIT, a direct-injection turbocharged four-cylinder diesel producing 80 kW (107 hp) gross and 75 kW (101 hp) net at 2200 rpm, with 4.0 L (243 cu in) displacement. It drives the paver's fully hydrostatic propel, feeder, auger, and vibrator systems through a mechanical rotary injection pump rather than common-rail electronics.
What is the AP-800C's operating weight?
Operating weight varies by screed: roughly 13,575 kg (29,930 lb) with the Pavemaster 8B screed up to about 15,470 kg (34,100 lb) with the larger Extend-A-Mat 10-20B screed. Tractor weight without a screed fitted runs lighter still, so match the figure to the actual screed configuration on the machine.
What replaced the Caterpillar AP-800C?
The AP-800D succeeded the AP-800C, keeping the same 8-ft paver class and general chassis but switching to Caterpillar's own 3054C engine at roughly 130 hp, a step up from the AP-800C's 3054DIT. The AP-800C itself had replaced the earlier Perkins T4.236-powered AP-800/AP-800B.
What AP-800C owners discuss
The AP-800C runs the 3054DIT — what's different about this engine compared to the Perkins-powered AP-800/AP-800B or the later 3054C in the AP-800D?
The 3054DIT is the direct-injection turbocharged member of the 3054 family, built in the era before common-rail electronics — it uses a mechanical rotary injection pump rather than the ATAAC/common-rail setup found on later 3054C applications. Owners of machines in this DIT generation report the usual mechanical-pump quirks: fuel delivery interruptions and sensor-triggered shutdowns traced to air in the fuel system, a weak lift pump, or a blocked fuel tank vent creating vacuum that starves the pump. Don't cross-apply electronic fault-code troubleshooting from the 3054C — this engine predates that control strategy on the AP-800C.
Operators report the hydrostatic propel getting sluggish after the machine has been running a while — what's the usual cause?
On hydrostatic-drive pavers generally, a drop-off in propel and function speed after warm-up points to charge/pilot pressure, not the main pumps themselves. The small pilot filter downstream of the charge pump is the first suspect — once it starts loading up, pilot pressure drops as oil heats and thins, and the pump regulators can't fully stroke or shift valve spools. Check pilot pressure cold and again once the machine has heated up and slowed; a significant drop between the two readings confirms the filter or charge pump as the cause rather than a worn main pump. Have your dealer verify pilot circuit pressures against spec before replacing major hydrostatic components.
What wears fastest on the feeder and conveyor system, and is it specific to this machine?
This is a wear pattern common to rubber-tired pavers of this class, not unique to the AP-800C. Floor plates, auger flights, conveyor chains, and feeder bearings live in the abrasive material path and take the brunt of the wear. Thin floor plates warp, auger flighting wears to a point, conveyor chains sag and need re-tensioning, and bearing seals eventually let mix contaminate the internals. Chain wear or poor adjustment shows up as surging or starvation ahead of the screed — inconsistent head of material, thickness swings, and texture problems that get blamed on the screed when the real cause is upstream.
Feed sensors keep giving erratic readings — is this a known weak point?
Sonic feed sensors are sensitive to how they're used, not just prone to random failure. Every time paving speed, extender position, or auger height changes, it alters what the sensor sees, so an untrained crew can chase phantom sensor problems that are really operating-technique issues. The more consistent failure mode is material buildup on the sensor face — if the head of material is allowed to rise up and touch or bury the sensor during a shift, readings go erratic or drop out. Wipe the sensor face down at the end of every shift while the machine is still warm; this alone resolves a large share of reported feed-sensor complaints.
Any recurring overheating complaints tied to the 3054 engine family in paver duty?
Overheating on 3054-family engines in paver and compact-equipment applications is most often traced to low coolant, a clogged radiator or cooling passages, or a failing water pump — not a design flaw in the engine itself. In paver duty specifically, the radiator core packs with asphalt dust and fines faster than on other machine types, so screen and core cleaning needs to happen more often than the general service interval suggests, especially in hot-mix, dusty conditions. If overheating persists after a clean core and verified coolant level, have your dealer pressure-test the cooling system and check the water pump before assuming the block or head is at fault.
How do the screed and tow point sensors typically show wear or misadjustment on machines this age?
Uneven wear across the screed plates is the classic tell — it usually points back to incorrect tow point settings or inconsistent screed heating rather than plate material failure by itself. Tow point sensors and their hydraulic cylinders make constant small corrections to hold elevation and cross-slope, so worn pins or bushings at the tow point linkage translate directly into chatter in the automatic grade control. Cracked plates, loose fasteners, and worn edges are worth ultrasonic-checking on any machine with unknown paving history. Have your dealer verify tow point sensor calibration and screed heat balance before relying on automatic grade control for finish-critical work.
What should a buyer specifically check before purchasing a used AP-800C?
Confirm engine identity first — verify it's actually the DIT-generation 3054 and not a machine that's had a later powerplant swapped in, since parts and fuel-system troubleshooting differ across the AP-800/AP-800B, AP-800C, and AP-800D generations. Run the machine to full operating temperature and watch for propel speed dropping off, which flags pilot/charge circuit wear. Inspect floor plates, auger flighting, and conveyor chain for the abrasive wear described above, and check for material contamination in feeder bearings. Look for uneven screed plate wear as a sign of tow point or heating problems, and check pins and bushings throughout the frame and tow points for play, which is a good proxy for how well the machine was maintained. Pull fluid samples — engine oil, hydraulic oil, and coolant — and have your dealer run analysis and a full hydraulic and cooling system inspection before you commit to the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific AP-800C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.