Caterpillarasphalt paver
Caterpillar AP-655D
Maintenance schedule, common problems & OEM parts breakdown
The Cat AP-655D is a mid-size track-type asphalt paver built around the Cat C6.6 ACERT diesel, rated about 174 hp (130 kW) gross and 166 hp (124 kW) net. Operating weight with the AS4251C screed runs around 19,165 kg (42,252 lb), varying with the undercarriage and screed width chosen. Caterpillar built the D-series roughly across 2009-2017 under serial prefixes GNZ, GNN, MAN, and MAT, sitting between the smaller AP-600 class and the larger AP-1000D. It followed the AP-655C and offered buyers a choice of Cat's Mobil-trac rubber-belt undercarriage or a conventional steel-track undercarriage, paired with the AS4251C extending vibratory screed available with LPG or electric heat.
The move from AP-655C to AP-655D brought the C6.6 ACERT engine with Tier 3/Stage IIIA electronic controls, tighter emissions, and refined independent auger/conveyor material-handling control, on top of the dual undercarriage choice. Caterpillar later dropped the D suffix, and the current AP655/AP655F generation runs a different engine family entirely under Tier 4 Final aftertreatment, so parts, filters, and fluids do not carry across that boundary. For the used and parts market, the AP-655D's appeal is exactly that Tier 3 simplicity: no DPF or SCR to maintain, a well-proven C6.6 driveline, and a large population of machines now aging into their major-overhaul years, which keeps demand steady for final drive, undercarriage, and screed-heat parts. Buyers need the serial prefix (GNZ/GNN/MAN/MAT) to confirm they are ordering for this generation and not the later bare AP655/AP655F.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar AP-655D specifications
Engine
| Engine model | Cat C6.6 with ACERT |
| Gross power | 174 hp (129.8 kW) |
| Net power (ISO 9249) | 166 hp (122 kW) at 2000 rpm |
| Cylinders | 6, inline, 4-stroke diesel |
| Displacement | 6.6 L (403 in³) |
| Emissions tier | Meets U.S. EPA Tier 3 / EU Stage IIIA emission standards (2009-2017 production run) |
Weights
| Operating weight (with AS4251C screed) | 19,165 kg (42,252 lb) |
| Shipping weight | Not published in available spec sheets — verify with dealer |
| Ground pressure | Not published in available spec sheets |
Dimensions
| Transport length (with push roller and largest screed) | 6.8 m (22.3 ft) |
| Transport width (tractor operating width) | 3.31 m (10.86 ft) |
| Transport height (transport position) | 2.92 m (9.58 ft) |
| Maximum height (working position) | 3.84 m (150.96 in) |
| Truck dump height | 605 mm (24 in) |
| Truck entry width | 3.2 m (10.5 ft) |
Performance
| Maximum travel speed | 14.5 km/h (9 mph) |
| Paving width, standard AS4251C plate | 2.55-5.0 m (8.4-16.4 ft) basic; extends to 8.0 m (26.3 ft) max with bolt-on extensions; 1.83 m (6 ft) min |
| Hopper capacity | 6.5 m³ |
| Gradeability | Not published for this class of machine |
Service capacities (summary)
| Fuel tank | 291 L (77 gal) |
| Hydraulic system | Not published in available spec sheets — verify with dealer |
| Engine oil | Not published in available spec sheets — verify with dealer |
| Cooling system | Not published in available spec sheets — verify with dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
AP-655D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat C6.6 ACERT turbo diesel | Not published for this exact paver installation (S/N prefix GNZ) - verify with dealer or data plate before service | Cat DEO-ULS (API CK-4) preferred; SAE 15W-40 for -10 to 50C (14 to 122F), SAE 10W-30 down to -18C (0F); Cat DEO-ULS SYN SAE 5W-40 for cold-soaked starts to -30C (-22F); Cat DEO (API CI-4/CI-4 PLUS) SAE 15W-40 or 10W-30 acceptable second choice |
| Cooling system | Not published for this generation's cooling package - verify with dealer or data plate | Cat ELC (Extended Life Coolant) preferred at 50 percent concentration (up to 60 percent for arctic protection, minimum 30 percent required); Cat DEAC conventional coolant acceptable with regular SCA additions every 250-300 service hours |
| Fuel tank | 291 L (77 US gal) | Cat distillate diesel fuel per Cat specification; ULSD (15 ppm sulfur maximum) required if the engine carries exhaust aftertreatment; biodiesel blends up to B20 acceptable depending on engine configuration |
| Propel final drive / pump drive | Not published for this model - verify with dealer | Cat TDTO SAE 50 for warmer climates (-15 to 50C / 5 to 122F); Cat TDTO-TMS multigrade for a wider ambient range (-20 to 43C / -4 to 110F) |
| Auger, conveyor, and pump drive reducers | Not published for this model - verify with dealer | Cat GO gear oil SAE 80W-90 or SAE 85W-140; Cat Synthetic GO SAE 75W-140 for cold climates to -30C (-22F); commercial API GL-5 gear oil acceptable second choice |
| Hydraulic system and tank | Not confirmed for this C6.6-powered generation - a 219 L (58 US gal) hydraulic tank figure is documented for the later-generation redesigned paver with C4.4/C7.1 engines and should not be assumed to carry over; verify with dealer or data plate | Cat HYDO Advanced 10/20/30 selected by ambient temperature (SAE 10W below -20C, up to SAE 30 to 50C); Cat Bio HYDO Advanced (ISO 46) where a biodegradable fluid is specified; Cat TDTO Cold Weather SAE 0W-20 for extreme cold starts; Cat DEO-ULS, Cat DEO, or Cat MTO acceptable alternates by climate |
| Track idlers and track rollers | Sealed, lifetime-lubricated components - not a routine service refill point | Factory fill is Cat DEO-ULS or Cat DEO SAE 15W-40; Cat DEO Cold Weather SAE 0W-40 or Cat DEO-ULS SYN SAE 5W-40 for cold climates |
| Grease (multi-purpose lubrication points) | Per fitting - no reservoir | Cat Prime Application Grease (NLGI 2) for moderate-to-heavy paver pin and bushing joints; Cat Extreme Application Grease (NLGI 1 or 2) for severe/heavy-impact joints; Cat Utility Grease (NLGI 2) for light-duty points |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar AP-655D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
| Every 12,000 h |
|
Servicing the AP-655D beyond the schedule
Predictive Maintenance & Fluid Analysis
The C6.6 ACERT engine and hydraulic propel system respond well to Cat S·O·S oil and coolant sampling at every fluid change. Track oil analysis trends on the engine, the propel drive motors, and the screed extension circuit to catch bearing wear or contamination before a paving season stalls. On Mobil-trac machines, watch hydraulic drift in the two-speed planetary; on steel-track units, trend the variable-displacement propel motor. Rising iron or silicon counts point to undercarriage or auger gearbox wear, not just engine wear.
Corrective & Common Repairs
Expect wear at the material path first: screed plates, auger flighting, and conveyor drive chains take the abrasive punishment and need regular replacement, not troubleshooting. Auger gearbox seals leak oil into the tunnel over time and should be caught early. Mobil-trac belts wear at the edges and lugs; steel track pins and bushings stretch the chain. Hydraulic hoses routed near the heated screed crack from heat cycling before they fail from pressure, so inspect routing at every screed service.
Overhaul & Rebuild Points
Major rebuild points on the AP-655D center on the final drive planetaries (one per track side), the propel drive motors and pumps, and the C6.6 ACERT turbocharger and injectors at high hours. The AS4251C screed's LPG burner rail or electric heat elements and their wiring are a common full-teardown item once heat-up time slows. Main frame tow points and screed pull-arm bushings wear oval over years of pushing and should be measured, not just visually inspected, before committing to a rebuild.
Seasonal & Environment Servicing
Cold starts stress the C6.6 ACERT fuel system and stiffen Mobil-trac rubber belts; run a winter fuel blend, check track tension more often, and verify the AS4251C screed's LPG burners or electric elements light off and hold temperature before the first cold-mix job. In hot, dusty paving conditions, clean the radiator and aftercooler cores more often than the standard interval and shorten the air filter service interval. Asphalt dust also cakes hopper wings and auger bearings faster in summer heat, so grease more frequently.
AP-655D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 299-8229 | Filter-Fuel | Fuel system service | Check fitment → |
| 256-7902 | Filter Element As-Air | Air intake service | Check fitment → |
| 256-7903 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
AP-655D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| E360 | Low Engine Oil Pressure | Oil pressure at the C6.6 engine ECM dropped below the trip point for the RPM range for about 2 seconds; low oil level, worn oil pump, plugged filter, or failed pressure sensor/wiring. | Stop and check oil level and filter condition immediately; if level and filter are correct, check the oil pressure sensor and wiring before returning the paver to service. |
| E361 | High Engine Coolant Temperature | Coolant temperature stayed above the trip point (about 108 C / 226 F) for several seconds; low coolant, blocked radiator/fins, fan drive fault, or bad coolant temperature sensor. Engine self-derates roughly 25% at this trip point. | Shut down and let the engine cool, check coolant level and radiator for packed debris/asphalt residue, verify fan operation, then clear and retest before resuming paving. |
| E362 | Engine Overspeed | Engine RPM exceeded the overspeed trip point for the delay time, typically from a downhill/overrun condition, throttle linkage issue, or speed sensor fault. | Reduce load and RPM immediately, inspect throttle and governor linkage, and check the engine speed/timing sensor if the event repeats with no operator cause. |
| E172 | High Air Filter Restriction | Intake air filter element is loaded with dust/debris, restricting airflow to the C6.6 engine; can also follow a collapsed or disconnected intake hose. | Check the air filter restriction indicator and replace the filter element if in the red zone; inspect intake ducting for leaks or collapse. |
| CID 0096 FMI 03 | Fuel Level Sensor circuit, voltage above normal | Open circuit or short to a voltage source in the fuel level sender wiring, or a failed sender in the fuel tank. | Check sender connector and wiring for damage or corrosion; test sender resistance against spec and replace if out of range. |
| CID 0248 FMI 02 | CAT Data Link, erratic/intermittent/incorrect signal | Loose, corroded, or damaged data link connector or wiring between machine ECMs (engine ECM to paver/Advisor display), or a grounding/EMI issue. | Inspect and reseat data link connectors at the ECMs and display, check harness for chafing near the engine compartment, then recheck for the code with Cat ET. |
| CID 0110 | Engine Coolant Temperature Sensor circuit fault | Open or shorted coolant temperature sensor circuit, corroded connector, or failed sensor on the C6.6 engine. | Inspect sensor wiring and connector, test sensor resistance at known temperatures, and replace the sensor if reading is out of range. |
| CID 0100 | Engine Oil Pressure Sensor circuit fault | Open or shorted oil pressure sensor circuit or a failed sensor, distinct from an actual low-oil-pressure event (E360). | Check sensor connector and wiring, verify actual oil pressure with a mechanical gauge, and replace the sensor if it disagrees with the gauge reading. |
| CID 0945 | Conveyor Mode Switch fault | Faulty or misadjusted conveyor mode selector switch at the operator station, or wiring fault between switch and the paver control module. | Cycle the switch and check for a clean on/off signal at the connector; replace the switch or repair wiring if it fails to toggle correctly. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
AP-655D attachments & work tools
Screed family (vibratory, bolt-on)
AP-655D pairs with the AS2252C, AS3251C, or AS4251C vibratory screeds on a 2.5 m (8 ft) or 3.0 m (10 ft) heavy-duty base frame. Screed choice sets whether extenders mount front or rear and whether plates run 229 mm (9 in), 400 mm (15 in), or 457 mm (18 in) front-to-back.
AS2252C narrow front-mount screed
Front-mounted hydraulic extenders with narrow 229 mm (9 in) plates, aimed at commercial work where frequent width changes are common. Standard paving range runs about 2.5-5.0 m (8-16 ft), reported up to roughly 5.7 m (18 ft 5 in) with extensions, varies by configuration.
AS3251C rear-mount screed
Rear-mounted hydraulic extenders on heavy-duty support tubes for stable, even material flow on highway and street work. Main and extender plates run 457 mm (18 in) front-to-back; used for wider, higher-production commercial and highway paving than the AS2252C.
AS4251C screed
Main and extender plates run 400 mm (15 in) front-to-back, standard paving range about 2.55-5.00 m (8.4-16.4 ft). Reported max width up to about 7.0 m (23 ft) with extensions and electric heat, varies by configuration.
Screed extension/mounting system
Extensions bolt onto the heavy-duty screed main frame rather than using a quick-coupler; hydraulic extenders (front or rear depending on screed) give 2-speed proportional in/out control from the operator station. No tamper-bar-only variant is documented specifically for this model beyond the standard vibratory screeds.
Screed heat kit
Screed heat is factory-selectable as electric or LPG (propane). Electric heat draws from the tractor-mounted integrated generator; the heater elements are monitored for failure so individual elements, not the whole harness, get replaced.
Integrated generator / auxiliary power panel
Standard tractor-mounted generator is rated on the order of 25 kW at 60 Hz, sized for electric screed heat plus an optional auxiliary power panel (roughly 8 kW) for site lighting and corded work tools. Treat exact kW as nominal, confirm against the specific machine's data plate.
Grade and slope control
Factory Cat Grade and Slope package uses elevation and cross-slope sensors, either independently or averaging together; an averaging beam option carries multiple sensors for smoother transitions with on-the-go sensor selection in auto mode. Material-side options add sonic feed sensors, hopper-level sensing, and material temperature/height sensing for a wide-width paving package.
Material handling system
Gateless hopper and independent auger/conveyor controls (separate ratio dials per side) support hands-free material delivery. Hopper capacity is about 6.5 m3, roughly 14 tonne of mix, figure varies slightly by source.
Conveyor/auger guarding
Conveyor bed plates are hardware-free for tool-less replacement, and chain guards mount from the underside so bolts stay clear of wear and material buildup. This is a factory design feature, not a bolt-on guard kit.
Undercarriage option
AP-655D is offered with either the rubber Mobil-trac undercarriage or a steel-track undercarriage, selected at the factory rather than field-swapped.
Hydraulic fold hopper apron and track plow
Optional hydraulically folding front hopper apron eases transport and cleanout. An optional track plow is available to clear debris ahead of the tracks during paving.
Operator station canopy
Dual swing-out operator's stations (one each side) are standard, with a folding canopy over each station; canopy folds down for low-clearance transport or storage.
All AP-655D assemblies by section
Every catalogued assembly group for the Caterpillar AP-655D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
270-4254 Air Cleaner Gp
| 23***88 | Gasket-Inlet | 1 |
| 27***54 | Air Cleaner Group | 1 |
| 27***02 | Dowel | 2 |
270-8357 Air Cleaner Gp
| 03***47 | Ferrule | 3 |
| 03***14 | Nut; (7/16-In) | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
270-4255 Exhaust Gp-Flexible
| 24***93 | Stud; (M12x1.75x100-mm) | 8 |
| 24***95 | Support As | 2 |
| 24***97 | Nut-Brass; (M12x1.75-Thd) | 16 |
288-3582 Manifold Gp-Inlet
| 24***95 | Support As | 8 |
| 24***15 | Burner | 8 |
| 24***36 | Bolt; (M12x1.75x20-mm) | 16 |
285-3414 Turbocharger Gp
| 26***48 | Pedal Group-Governor; -Electronic | 2 |
| 27***36 | Spacer | 2 |
| 28***14 | Turbocharger Group, Engine Oil Pump; In Alternative, Engine Oil Pump; Oil Pump Assembly; Alternate Part To 48***80, Engine Oil Pump; Alternative, Engine Oil Pump; Alternate, Serial Range: Part-48***80, Engine Oil Pump; In Alternative, Engine Oil Pump; In Alternative, Engine Oil Pump; Oil Pump Assembly; Alternate, Serial Range: Part-48***80 | 1 |
Basic Engine
279-8837 Camshaft Gp
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 20***02 | Cover As; (Power Take-Off) | 1 |
282-2827 Cover Gp-Cylinder Block
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 27***23 | Plug | 1 |
277-4224 Cover Gp-Engine
| 10***66 | Clamp-Hose | 2 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 2 |
| 13***08 | Cap As; (Engine Oil Filler) | 1 |
282-2825 Cover Gp-Valve Mechanism
| 03***20 | Clip | 2 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 12***81 | Clip | 1 |
279-8762 Crankshaft Gp
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 27***16 | Plug-Core | 6 |
279-8711 Cylinder Block Gp
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 27***16 | Plug-Core | 6 |
276-8115 Cylinder Head As
| 17***41 | Head-Gasket | 1 |
| 27***15 | Cylinder Head As | 2 |
| 27***34 | Bolt-Special; (Cylinder Head) | 14 |
309-6663 Cylinder Head As
| 17***41 | Head-Gasket | 1 |
| 27***34 | Bolt-Special; (Cylinder Head) | 14 |
| 30***63 | Cylinder Head As | 2 |
279-8821 Cylinder Head Gp
| 15***55 | Adapter | 1 |
| 16***35 | Plug As | 1 |
| 20***28 | Hose As | 1 |
291-2513 Drain Gp-Engine Oil
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 12 |
| 10***31 | Flywheel As | 1 |
270-4259 Drain Gp-Engine Oil
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 27***59 | Drain Group-Engine Oil | 1 |
| 28***26 | Pulley | 1 |
289-3265 Drive Gp-Fan
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 19***09 | Plug | 1 |
285-2000 Flywheel Gp
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
284-0892 Housing Gp-Flywheel
| 27***51 | Plate-Lifting | 1 |
| 27***52 | Plate-Lifting | 1 |
| 28***92 | Housing Group-Flywheel | 1 |
277-3014 Housing Gp-Front
| 27***14 | Housing Group-Front | 1 |
| 27***90 | Bracket-Mounting | 2 |
| 28***01 | Bolt | 2 |
279-9653 Lifting Gp-Engine
| 15***12 | Mount As | 2 |
| 23***44 | Support As | 1 |
| 23***45 | Support As | 1 |
300-4431 Mounting Gp-Engine
| 10***90 | Plug | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 27***83 | Seal; (Sump Drain Plug) | 1 |
270-4250 Mounting Gp-Engine Flexible
| 12***36 | Ring-Retaining | 2 |
| 22***39 | Bolt-Special; (Connecting Rod) | 2 |
| 27***50 | Mounting Group-Engine Flexible | 1 |
300-4439 Pan Gp-Oil
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
| 30***39 | Pan Group-Oil | 1 |
279-8780 Piston & Rod Gp
| 27***30 | Damper | 1 |
| 27***31 | Pulley | 1 |
| 27***32 | Hub | 1 |
277-5007 Plug Gp-Engine
| 27***00 | Plug-Shaft End | 1 |
| 27***01 | Circlip | 1 |
| 27***06 | Spring-Shaft | 5 |
291-4135 Pulley Gp-Crankshaft
| 28***11 | Rocker Arm Group | 1 |
| 29***35 | Pulley Group-Crankshaft | 1 |
| 33***97 | Link | 12 |
291-4136 Pulley Gp-Fan
| 26***25 | Filter-Engine Oil | 1 |
| 29***36 | Pulley Group-Fan | 1 |
280-1911 Rocker Arm Gp
| 28***11 | Rocker Arm Group | 1 |
| 31***45 | Pump-Oil; (Engine) | 1 |
| 6I***90 | Bolt; (M8x1.25x40-mm) | 4 |
279-8825 Valve Mechanism Gp
| 10***87 | Bolt; (M10x1.5x85-mm) | 1 |
| 12***99 | Bolt; (M10x1.5x40-mm) | 1 |
| 27***25 | Valve Mechanism Group | 1 |
Braking System
193-8539 Pump & Valve Gp-Brake -Manual Release
| 19***39 | Pump & Valve Group-Brake; -Manual Release | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
229-9476 Pump Gp-Hand -Brake Release
| 22***76 | Pump Group-Hand; -Manual Brake Release | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
Controls
320-3019 Adjuster Gp-Height -Rh
| 32***19 | Adjuster Group-Height; -Rh | 1 |
261-9510 Adjuster Gp-Height
| 20***55 | Nut; (M20x1.5-Thd) | 2 |
| 24***20 | Nut; (M20x1.5-Thd, Lh) | 2 |
| 24***62 | Gear As; (15-Teeth) | 2 |
261-9514 Adjuster Gp-Height
| 10***41 | Locknut-Bearing; (M30x1.5-Thd) | 4 |
| 17***35 | Ring-Retaining | 2 |
| 24***10 | Stopper-Rubber | 1 |
320-3021 Adjuster Gp-Height -Lh
| 08***34 | Screw-Button Head | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
242-2785 Adjuster Gp-Manual -Gate
| 08***34 | Screw-Button Head | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
250-3368 Adjuster Gp-Manual
| 08***34 | Screw-Button Head | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 16***65 | Bolt-Socket Head; (M4x0.7x16-mm) | 4 |
242-2781 Crown Gp-Power
| 24***81 | Crown Group-Power | 1 |
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
299-7235 Crown Gp-Power
| 09***23 | Screw; (M3x0.5x10-mm) | 4 |
| 27***59 | Cabinet | 1 |
| 27***60 | Keypad As | 1 |
276-5635 Universal Joint Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 27***35 | Universal Joint Group | 1 |
Cooling System
281-8748 Connection Gp-Water
| 11***29 | Bolt; (M8x1.25x75-mm) | 7 |
| 22***38 | Seal-O-Ring | 1 |
| 22***19 | Gasket | 1 |
326-7401 Cooler Gp-Engine Oil
| 00***64 | End; (Hose) | 1 |
| 00***70 | Tee-Pipe | 1 |
| 03***39 | Connector | 1 |
281-7381 Cooler Gp-Engine Oil
| 11***29 | Bolt; (M8x1.25x75-mm) | 7 |
| 22***38 | Seal-O-Ring | 1 |
| 22***19 | Gasket | 1 |
277-2939 Pump Gp-Water
| 06***93 | Clamp-Tubing | 1 |
| 10***05 | Elbow; (90 Degree) | 1 |
| 14***11 | Adapter-Filter | 1 |
270-4257 Radiator & Hyd Oil Cooler Gp
| 21***81 | Cover As | 1 |
| 22***63 | Valve As-Air | 1 |
| 25***02 | Filter Element As-Air; (Primary) | 1 |
333-7770 Radiator & Hyd Oil Cooler Gp
| 06***93 | Clamp-Tubing | 2 |
| 13***49 | Cable As | 2 |
| 24***93 | Muffler | 1 |
Electrical And Starting System
3e-6328 Alarm Gp -24-Volt
| 29***80 | Terminal | 1 |
| 30***01 | Terminal | 10 |
| 30***91 | Terminal | 1 |
285-3080 Alternator Gp-Charging
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 11***18 | Clip | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 1 |
269-8366 Battery & Wiring Gp
| 11***18 | Clip | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 1 |
306-6666 Box Gp-Control
| 30***66 | Air Intake Connection, Box Group-Control | 1 |
| 34***21 | Software Group-Machine | 1 |
| 34***22 | Service Group-Machine | 1 |
266-3171 Box Gp-Control -Burner
| 26***71 | Box Group-Control; -Burner | 1 |
| 26***66 | Battery & Wiring Group | 1 |
| 26***71 | Wiring Group-Power Train | 1 |
288-1013 Box Gp-Control
| 28***13 | Box Group-Control | 1 |
| 32***76 | Software Group-Communication; (Product Link 300) | 1 |
| 32***77 | Service Group-Communication; (Product Link 300) | 1 |
289-5816 Box Gp-Junction
| 28***16 | Box Group-Junction | 1 |
| 34***23 | Software Group-Machine; (Master Operator Station Ecm) | 1 |
| 34***24 | Service Group-Machine; (Master Operator Station Ecm) | 1 |
356-4233 Box Gp-Relay
| 14***11 | Plug Group | 1 |
| 16***80 | Plug As. | 1 |
| 16***16 | Plug As | 1 |
307-9156 Box Gp-Relay
| 30***56 | Box Group-Relay | 1 |
| 34***49 | Software Group-Monitor | 1 |
| 34***50 | Service Group-Monitor | 1 |
353-0442 Box Gp-Relay
| 21***99 | Clamp-Half | 2 |
| 35***42 | Box Group-Relay | 1 |
| 8T***34 | Bolt-Socket Head; (M6x1x50-mm) | 2 |
295-9766 Box Gp-Relay
| 29***66 | Box Group-Relay | 1 |
| 34***10 | Software Group-Machine | 1 |
| 34***11 | Service Group-Machine | 1 |
307-9160 Control & Mtg Gp-Machine
| 14***11 | Plug Group | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***80 | Plug As. | 1 |
262-4128 Electrical Ar
| 23***32 | Generator Group | 1 |
| 24***47 | Film-Information; (Circuit Breaker) | 1 |
| 26***28 | Electrical Ar | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 23***32 | Generator Group | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
| 27***63 | Plate | 1 |
316-2544 Electronics Gp-Machine
| 10***38 | Bolt; (M6x20-mm) | 1 |
| 27***28 | Insulator | 1 |
| 27***07 | Bar As | 1 |
316-2543 Electronics Gp-Machine -Operator Control
| 28***28 | Generator Group; (Hydraulic) | 1 |
| 30***15 | Plate | 1 |
| 30***85 | Plate | 1 |
316-3351 Electronics Gp-Monitor
| 21***39 | Strap-Cable | 4 |
| 26***41 | Harness As-Engine | 1 |
| 27***09 | Bracket | 1 |
303-2133 Fastener Gp-Wiring Harness
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
| 30***89 | Antenna; (Flexible), Captive Washer Cap Screw; 1/2 - 13 X 4 3/4 In., Captive Washer Cap Screw, Screw, Captive Washe; 1/2-13 X 4 3/4" | 1 |
270-5315 Generator Gp
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 15***54 | Bolt; (M10x1.5x40-mm) | 1 |
| 22***74 | Bezel; (Hid) | 1 |
302-5776 Generator Gp -Hydraulic
| 23***23 | Lamp Group-Flood; -Vertical Mount | 4 |
| 29***39 | Harness As-Front Lighting | 2 |
| 30***76 | Generator Group; -Hydraulic | 1 |
289-5220 Generator Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
277-4410 Glow Plug Gp
| 13***00 | Clip; (Tab) | 4 |
| 27***10 | Glow Plug Group | 1 |
| 28***45 | Lamp Group-Flood; -24-Volt, 35-Watt, Hid-Cab Guard | 4 |
294-8412 Harness As-Engine
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 29***12 | Harness As-Engine | 1 |
| 2U***22 | Bulb (Indicator) 24v 21w Scc | 1 |
320-2490 Heater Ar-Screed
| 28***75 | Collar | 4 |
| 28***79 | Washer; (32.5x63.5x7.1-mm Thk) | 2 |
| 28***81 | Handle | 2 |
286-3624 Heater Ar-Screed
| 25***48 | Gearbox | 1 |
| 28***24 | Heater Ar-Screed; -Electric | 1 |
| 29***39 | Motor-Electric | 1 |
286-3622 Heater Ar-Screed -Lpg Heat
| 23***55 | Bead-Ferrite | 2 |
| 23***37 | Lamp Group-Warning Beacon; -Amber, Rotating | 2 |
| 28***22 | Heater Ar-Screed; -Lpg Heat | 1 |
311-6865 Installation Gp-Communication
| 11***18 | Clip | 3 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 2 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
283-8145 Lamp Gp-Flood -24-Volt, 35-Watt, Hid
| 11***18 | Clip | 3 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 2 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
234-4323 Lamp Gp-Flood -Low Beam
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
291-3698 Lamp Gp-Signal -Rh
| 29***98 | Lamp Group-Signal; -Rh | 1 |
| 32***74 | Software Group-Communication; (Product Link 121sr) | 1 |
235-3937 Lamp Gp-Warning Beacon -Amber, Rotating
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 11***07 | Knob | 2 |
| 12***44 | Paddle As | 2 |
290-6022 Lighting Gp-Flood
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 29***22 | Lighting Group-Flood; -Hid | 1 |
288-6925 Lighting Gp-Flood
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 28***25 | Lighting Group-Flood | 1 |
293-5354 Lighting Gp-Roading -Lh
| 12***50 | Receptacle As | 1 |
| 12***51 | Bushing | 1 |
| 12***52 | Clamp As-Cable | 1 |
276-1832 Lighting Gp-Warning Beacon
| 11***24 | Clamp | 4 |
| 16***41 | Support-Sensor | 2 |
| 19***38 | Sensor Group-Sonic; (Position) | 4 |
299-7245 Motor Gp-Electric
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 29***45 | Motor Group-Electric | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
258-6918 Mounting Gp-Sensor -Sonic Sensor
| 11***24 | Clamp | 2 |
| 19***38 | Sensor Group-Sonic; (Position) | 2 |
| 1G***11 | Shaft-Governor Control | 2 |
278-1591 Panel Gp-Circuit Breaker
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
348-3338 Panel Gp-Circuit Breaker
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 34***38 | Panel Group-Circuit Breaker | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
292-7946 Panel Gp-Circuit Breaker
| 10***78 | Bolt; (M10x1.5x55-mm) | 2 |
| 29***59 | Starting Motor-Electric | 1 |
| 29***60 | Bolt | 1 |
326-6194 Panel Gp-Circuit Breaker
| 2H***22 | Lockwasher | 2 |
| 32***94 | Panel Group-Circuit Breaker | 1 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
| 17***09 | Switch Group-Magnetic; -24-Volt-Start Relay | 1 |
| 33***45 | Radio Group-Communication; -Product Link 121sr | 1 |
198-8279 Sensor Gp-Auger
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 19***79 | Sensor Group-Auger | 1 |
284-8876 Sensor Gp-Position
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 2 |
| 12***74 | Cover-Connector; (Wire Router) | 2 |
301-0071 Sensor Gp-Position -2 Sensor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 2 |
| 12***74 | Cover-Connector; (Wire Router) | 2 |
195-8090 Sensor Gp-Position
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***81 | Switch As-Magnetic; (Start Relay) | 1 |
278-3428 Sensor Gp-Position
| 13***00 | Clip; (Tab) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 27***28 | Sensor Group-Position; -4 Sensor | 1 |
219-2385 Sensor Gp-Position -Auger
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 21***85 | Sensor Group-Position; -Auger | 1 |
160-2443 Sensor Gp-Position -Rotary
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
145-7028 Sensor Gp-Temperature
| 11***18 | Clip | 6 |
| 13***89 | Clip; (Ladder) | 4 |
| 13***72 | Cover | 3 |
296-1288 Software Gp-Implement
| 11***18 | Clip | 31 |
| 13***00 | Clip; (Tab) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
292-7884 Starting Motor Gp-Electric
| 11***18 | Clip | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
| 13***00 | Clip; (Tab) | 6 |
7n-0718 Switch Gp-Disconnect -Battery
| 11***18 | Clip | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
| 13***00 | Clip; (Tab) | 6 |
172-8660 Switch Gp-Liquid Level
| 11***18 | Clip | 2 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
| 13***00 | Clip; (Tab) | 12 |
175-2309 Switch Gp-Magnetic -24-Volt-Start Relay
| 11***18 | Clip | 30 |
| 13***00 | Clip; (Tab) | 3 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
167-0138 Switch Gp-Magnetic -24-Volt
| 11***18 | Clip | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
| 13***00 | Clip; (Tab) | 9 |
175-2308 Switch Gp-Magnetic -24-Volt-Start Relay-Main Relay
| 11***18 | Clip | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
118-3534 Switch Gp-Magnetic -24-Volt
| 11***18 | Clip | 2 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
165-5970 Switch Gp-Toggle -Fuel Priming Pump
| 13***72 | Cover | 1 |
| 14***42 | Clamp | 2 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
299-7223 Wiring Gp-Crown
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 29***23 | Wiring Group-Crown | 1 |
272-7061 Wiring Gp-Electronic Control
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***01 | Plate-Face | 1 |
304-9103 Wiring Gp-Heater -Lh
| 1S***15 | Conduit Clip (Use As Required) | 2 |
| 24***70 | Grommet | 1 |
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 1 |
286-3632 Wiring Gp-Heater -Lpg Heat
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 7 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
304-9105 Wiring Gp-Heater -Rh
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 13***00 | Clip; (Tab) | 1 |
| 13***01 | Clip | 5 |
286-3633 Wiring Gp-Heater
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 13***98 | Terminal As | 1 |
| 24***70 | Grommet | 1 |
304-9106 Wiring Gp-Heater -Lh
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 4 |
| 29***69 | Plate | 1 |
| 30***06 | Wiring Group-Heater; -Lh | 1 |
304-9108 Wiring Gp-Heater -Lh
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***88 | Gasket-Connector | 1 |
| 15***98 | Screw-Button Head; (M3x0.5x1-mm) | 4 |
319-7155 Wiring Gp-Heater -Lpg Heat
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 29***49 | Bracket | 2 |
| 30***70 | Harness As-Box; (Rh) | 1 |
307-9155 Wiring Gp-Heater
| 13***01 | Clip | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 29***49 | Bracket | 2 |
307-9166 Wiring Gp-Heater
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 29***49 | Bracket | 2 |
| 30***70 | Harness As-Box; (Rh) | 1 |
304-9107 Wiring Gp-Heater -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 3 |
304-9102 Wiring Gp-Heater -Rh
| 1S***15 | Conduit Clip (Use As Required) | 2 |
| 24***70 | Grommet | 1 |
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 1 |
297-1002 Wiring Gp-Hydraulic Generator
| 13***00 | Clip; (Tab) | 3 |
| 29***02 | Wiring Group-Hydraulic Generator | 1 |
| 30***02 | Harness As-Heater; (Rh) | 1 |
272-7057 Wiring Gp-Machine -Rh
| 27***57 | Wiring Group-Machine; -Rh | 1 |
| 30***60 | Wiring Group-Screed; -Extension, Rh | 1 |
| 30***61 | Wiring Group-Screed; -Extension, Lh | 1 |
272-7059 Wiring Gp-Machine -Rear
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 6 |
| 27***59 | Wiring Group-Machine; -Rear | 1 |
| 29***69 | Plate | 1 |
272-7055 Wiring Gp-Machine
| 13***00 | Clip; (Tab) | 3 |
| 27***55 | Wiring Group-Machine | 1 |
| 30***03 | Harness As-Heater; (Lh) | 1 |
312-1754 Wiring Gp-Panel
| 13***72 | Cover | 3 |
| 14***42 | Clamp | 6 |
| 20***75 | Clamp-Half | 6 |
311-3004 Wiring Gp-Panel
| 20***75 | Clamp-Half | 2 |
| 23***95 | Conduit-Flexible; (21.9-mm Id)(3353-cm) | 0 |
| 30***64 | Harness As-Wiring; (Screed) | 2 |
299-5205 Wiring Gp-Panel -110-Vac
| 13***72 | Cover | 2 |
| 14***42 | Clamp | 4 |
| 23***95 | Conduit-Flexible; (21.9-mm Id)(3353-cm) | 0 |
299-5206 Wiring Gp-Power Receptacle -220-Vac
| 23***95 | Conduit-Flexible; (21.9-mm Id)(3353-cm) | 0 |
| 29***06 | Wiring Group-Power Receptacle; -220-Vac | 1 |
| 30***65 | Harness As-Wiring; (Spark Plug) | 2 |
269-8371 Wiring Gp-Power Train
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 26***71 | Wiring Group-Power Train | 1 |
| 29***49 | Bracket | 2 |
312-5017 Wiring Gp-Screed
| 10***44 | Elbow | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
| 20***00 | Elbow As | 2 |
306-8868 Wiring Gp-Screed
| 14***10 | Plug As; (16.36mm Id) | 1 |
| 20***34 | Plate-Cover | 1 |
| 29***10 | Plate-Cover | 1 |
310-8503 Wiring Gp-Screed
| 10***14 | Knob | 3 |
| 20***04 | Plate | 2 |
| 23***62 | Plate | 2 |
293-5341 Wiring Gp-Screed -Rh
| 29***41 | Wiring Group-Screed; -Rh | 1 |
| 31***52 | Wiring Group-Screed Heater; -250-mm Extension, Rh | 1 |
| 31***53 | Wiring Group-Screed Heater; -250-mm Extension, Lh | 1 |
295-2117 Wiring Gp-Screed
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***18 | Clip | 4 |
| 29***17 | Wiring Group-Screed | 1 |
306-6661 Wiring Gp-Screed -Extension, Lh
| 24***15 | Seal-O-Ring | 1 |
| 25***63 | Adapter | 1 |
| 30***61 | Wiring Group-Screed; -Extension, Lh | 1 |
289-5815 Wiring Gp-Screed
| 11***18 | Clip | 2 |
| 13***00 | Clip; (Tab) | 4 |
| 28***15 | Wiring Group-Screed | 1 |
312-5015 Wiring Gp-Screed
| 14***11 | Plug Group | 1 |
| 16***80 | Plug As. | 1 |
| 16***16 | Plug As | 1 |
312-5019 Wiring Gp-Screed
| 14***68 | Elbow Group | 2 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 2 |
| 27***60 | Cylinder Group-Hydraulic; -Screed Hoist | 2 |
306-6660 Wiring Gp-Screed -Extension, Rh
| 24***59 | Adapter | 1 |
| 24***15 | Seal-O-Ring | 1 |
| 30***60 | Wiring Group-Screed; -Extension, Rh | 1 |
288-2631 Wiring Gp-Screed
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 28***31 | Wiring Group-Screed | 1 |
| 29***49 | Bracket | 2 |
291-3697 Wiring Gp-Screed -Lh
| 11***18 | Clip | 2 |
| 13***00 | Clip; (Tab) | 4 |
| 28***16 | Box Group-Junction | 1 |
304-9104 Wiring Gp-Screed
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 29***87 | Wiring Group-Screed Heater; -750-mm Extension, Lh | 1 |
| 29***58 | Wiring Group-Screed Heater; -750-mm Extension, Rh | 1 |
297-2488 Wiring Gp-Screed
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***18 | Clip | 4 |
| 29***88 | Wiring Group-Screed | 1 |
312-5016 Wiring Gp-Screed
| 14***68 | Elbow Group | 4 |
| 17***51 | Pin-Clevis | 2 |
| 19***59 | Cylinder Group-Hydraulic; -Auger, Rh | 1 |
293-7187 Wiring Gp-Screed Heater -750-Mm Extension, Lh
| 29***87 | Wiring Group-Screed Heater; -750-mm Extension, Lh | 1 |
| 2K***68 | Locknut | 1 |
| 4B***06 | Setscrew-Socket; (1/4-20x0.25-In) | 1 |
328-9591 Wiring Gp-Screed Heater -750-Mm Extension
| 25***75 | Ring-Retaining | 1 |
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 1 |
| 30***78 | Kit-Seal | 1 |
319-7153 Wiring Gp-Screed Heater -250-Mm Extension, Lh
| 27***79 | Kit-Seal; (Hydraulic Cylinder) | 1 |
| 2K***71 | Locknut; (1-14-Thd) | 1 |
| 31***53 | Wiring Group-Screed Heater; -250-mm Extension, Lh | 1 |
291-3689 Wiring Gp-Screed Heater -Lpg Heat-8-Meter, Extension
| 14***74 | Elbow As | 2 |
| 16***88 | Elbow; (90-Deg) | 1 |
| 17***51 | Pin-Clevis | 4 |
291-3691 Wiring Gp-Screed Heater -Lpg Heat-7-Meter, Extension
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 2 |
| 14***74 | Elbow As | 4 |
306-8869 Wiring Gp-Screed Heater -250-Mm Extension
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 23***18 | Kit-Seal; (Auger Cylinder, Lh) | 1 |
| 23***19 | Wire-Lock | 1 |
319-7152 Wiring Gp-Screed Heater -250-Mm Extension, Rh
| 25***60 | Kit-Seal; (Hydraulic Cylinder) | 1 |
| 31***52 | Wiring Group-Screed Heater; -250-mm Extension, Rh | 1 |
| 5W***19 | Fitting-Grease | 2 |
293-7258 Wiring Gp-Screed Heater -750-Mm Extension, Rh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 23***20 | Kit-Plug; (Auger Cylinder) | 1 |
| 23***21 | Kit-Seal; (Auger Cylinder, Rh) | 1 |
Electrical System
288-6122 Box Gp-Screed Control -Rh
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***03 | Plate-Cover | 7 |
| 10***00 | Terminal As-Battery; (Remote Jump Start, Positive) | 1 |
288-1014 Box Gp-Screed Control -Lh
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***03 | Plate-Cover | 7 |
| 10***00 | Terminal As-Battery; (Remote Jump Start, Positive) | 1 |
286-5562 Box Gp-Screed Control -Rh
| 10***51 | Bolt; (M8x1.25x130-mm) | 1 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 1 |
| 14***83 | Bolt; (M10x1.5x45-mm)(Starter Motor) | 2 |
288-6124 Box Gp-Screed Control
| 26***06 | Cable As-Coiled | 2 |
| 27***62 | Connector; (Spark Plug) | 1 |
| 27***63 | Spark Plug | 2 |
288-6125 Box Gp-Screed Control -Lh
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
| 27***74 | Box; (Lh) | 1 |
274-1161 Control Gp-Burner
| 27***61 | Control Group-Burner | 1 |
| 27***66 | Board-Control | 1 |
| 27***65 | Connector | 8 |
Engine Arrangement
242-1319 Engine Ar-Primary
| 1B***36 | Key-Woodruff | 1 |
| 24***19 | Engine Ar-Primary | 1 |
| 27***25 | Tappet | 12 |
262-4106 Installation Ar-Engine
| 22***22 | Plug-Cup | 1 |
| 26***06 | Installation Ar-Engine | 1 |
| 27***74 | Plate As-Blk | 1 |
Feeder Drag And Auger Conveyors
263-6001 Auger Gp
| 26***01 | Auger Group | 1 |
| 31***84 | Tube | 2 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 2 |
201-5584 Bearing Gp-Auger
| 20***84 | Bearing Group-Auger | 1 |
| 23***97 | Motor & Mtg Group-Auger | 1 |
| 27***14 | Pump & Mtg Group-Conveyor | 1 |
116-9509 Bearing Gp-Auger
| 11***09 | Bearing Group-Auger | 1 |
| 12***54 | Screw-Flat Head; (M12x1.75x35-mm) | 64 |
| 19***39 | Plate | 4 |
106-9718 Bearing Gp-Auger
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
280-9921 Chain Gp-Conveyor
| 11***80 | Elbow | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***58 | Elbow As | 2 |
262-4105 Conveyor Ar-Drag & Auger
| 09***92 | Pin-Spring | 2 |
| 13***16 | Kit-Washer; (Planetary) | 1 |
| 13***30 | Plug-Magnetic; (Planetary) | 1 |
191-4421 Conveyor Gp-Auger
| 09***92 | Pin-Spring | 2 |
| 19***21 | Conveyor Group-Auger | 1 |
| 23***88 | Pin-Spring | 2 |
192-5448 Conveyor Gp-Drag
| 09***92 | Pin-Spring | 2 |
| 19***48 | Conveyor Group-Drag | 1 |
| 23***88 | Pin-Spring | 2 |
263-6007 Door Gp-Access
| 08***56 | 90 Degrees Elbow | 1 |
| 14***27 | Connector Group | 2 |
| 14***39 | Connector As. | 8 |
263-6000 Drive Gp-Conveyor
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 4 |
| 10***30 | Bearing-Flange | 2 |
| 10***70 | Key-Square | 2 |
231-3532 Extension Gp-Auger -6-In
| 12***73 | Extension As | 2 |
| 12***20 | Shim; (1.65-mm Thk) | 8 |
| 23***32 | Extension Group-Auger; -6-In | 1 |
198-8287 Extension Gp-Auger -12-In, Rh
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 19***19 | Roller | 4 |
| 19***20 | Shaft | 2 |
231-2042 Extension Gp-Auger -24-In, Rh
| 1A***68 | Nut | 1 |
| 23***42 | Extension Group-Auger; -24-In, Rh | 1 |
| 31***02 | Plate As | 1 |
243-0329 Extension Gp-Auger -18-In
| 09***22 | Ring-Retaining | 4 |
| 24***04 | Handle | 1 |
| 24***29 | Extension Group-Auger; -18-In | 1 |
231-2043 Extension Gp-Auger -24-In, Lh
| 22***51 | Bracket | 1 |
| 23***43 | Extension Group-Auger; -24-In, Lh | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
199-4206 Extension Gp-Auger -12-In, Lh
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 31***61 | Plate | 2 |
| 7X***75 | Bolt-Plt; (M16 X 2.0 X 130) | 4 |
215-1870 Footshaft Gp
| 09***22 | Ring-Retaining | 8 |
| 21***70 | Footshaft Group | 1 |
| 24***04 | Handle | 1 |
263-6002 Guard Gp-Conveyor
| 26***02 | Guard Group-Conveyor | 1 |
| 27***43 | Cover | 2 |
| 9X***42 | Screw-Truss Head (M6x1.0x12mm); (M6x1.00x12mm) | 6 |
269-7123 Hydraulic Ar-Conveyor
| 09***49 | Bolt; (M8x1.25x40-mm) | 14 |
| 13***40 | Locknut; (M8x1.25-Thd) | 6 |
| 23***06 | Bumper | 1 |
270-7215 Motor & Mtg Gp-Conveyor
| 09***22 | Ring-Retaining | 4 |
| 11***33 | Washer; (11x50x6-mm Thk) | 8 |
| 13***73 | Screw-Flat Head; (M10x1.5x25-mm) | 4 |
341-9466 Planetary Gp-Auger -Conveyor
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
191-4411 Planetary Gp-Auger
| 09***85 | Locknut; (M16x2-Thd) | 8 |
| 15***49 | Screw-Flat Head; (M10x1.5x25-mm) | 28 |
| 19***11 | Planetary Group-Auger; -Conveyor | 1 |
192-7962 Planetary Gp-Conveyor
| 10***88 | Extension As | 1 |
| 19***62 | Planetary Group-Conveyor | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
341-9467 Planetary Gp-Conveyor -Drag
| 10***90 | Extension As | 1 |
| 34***67 | Planetary Group-Conveyor; -Drag | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
270-7214 Pump & Mtg Gp-Conveyor
| 27***14 | Pump & Mtg Group-Conveyor | 1 |
| 27***27 | Fitting-Grease | 4 |
| 5W***17 | Fitting-Grease | 12 |
263-6003 Shaft Gp-Feeder Drive
| 15***74 | Bolt-Round Head; (M12x1.75x60-mm) | 5 |
| 25***07 | Bolt-Round Head; (M12x1.75x65-mm) | 18 |
| 26***03 | Shaft Group-Feeder Drive | 1 |
Frame And Body
286-3634 Arm Gp-Drop
| 27***90 | Flashing | 2 |
| 27***42 | Plate | 2 |
| 27***50 | Flashing | 2 |
271-2815 Arm Gp-Tow
| 15***74 | Bolt-Round Head; (M12x1.75x60-mm) | 5 |
| 25***07 | Bolt-Round Head; (M12x1.75x65-mm) | 18 |
| 27***15 | Arm Group-Tow | 1 |
316-1659 Ballast & Mounting Gp -2-Plate
| 14***93 | Bolt; (M12x1.75x40-mm) | 8 |
| 27***20 | Frame As; (Paver) | 1 |
| 27***37 | Angle As; (Lh) | 1 |
316-1658 Ballast & Mounting Gp -Bar, 2-Plate
| 26***82 | Flashing | 2 |
| 27***90 | Flashing | 2 |
| 27***42 | Plate | 2 |
350-6039 Brace Gp
| 15***86 | Plate As | 1 |
| 17***08 | Plate As | 3 |
| 35***39 | Brace Group | 1 |
350-5664 Brace Gp
| 10***06 | Plate As | 3 |
| 15***86 | Plate As | 2 |
| 17***08 | Plate As | 2 |
315-1101 Brace Gp
| 09***59 | Pin-Cotter | 4 |
| 09***19 | Ring-Retaining | 8 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
106-9689 Brace Gp
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 09***85 | Locknut; (M16x2-Thd) | 2 |
| 10***89 | Brace Group | 1 |
263-6006 Bracket Gp-Support
| 13***82 | Bolt; (M16x2x100-mm) | 8 |
| 15***49 | Screw-Flat Head; (M10x1.5x25-mm) | 16 |
| 19***83 | Nut; (M8x1.25-Thd) | 32 |
282-8500 Bracket Gp-Support
| 27***22 | Bushing | 2 |
| 28***00 | Bracket Group-Support | 1 |
| 32***50 | Plate Group-Slide | 1 |
232-1107 Bracket Gp-Support
| 09***85 | Locknut; (M16x2-Thd) | 4 |
| 13***82 | Bolt; (M16x2x100-mm) | 4 |
| 15***49 | Screw-Flat Head; (M10x1.5x25-mm) | 8 |
295-2114 Cover Gp-Access
| 27***22 | Bushing | 2 |
| 29***14 | Cover Group-Access | 1 |
| 32***50 | Plate Group-Slide | 1 |
295-2143 Cover Gp-Access
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 17***11 | Locknut; (M16x2-Thd) | 4 |
273-9915 Cover Gp-Access
| 17***08 | Plate As | 1 |
| 25***34 | Plate Group-Screed; -Sliding | 1 |
| 25***78 | Pin | 2 |
272-2384 Cover Gp-Platform
| 08***07 | Pin | 2 |
| 09***79 | Setscrew-Socket | 4 |
| 09***76 | Nut; (M14x2-Thd) | 2 |
328-9585 Cover Gp-Screed
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
| 16***85 | Pin As | 2 |
286-3493 Cover Gp-Screed
| 16***06 | Rod | 1 |
| 19***54 | Chain | 1 |
| 27***65 | Bar | 1 |
250-3366 Deflector Gp
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 1 |
| 25***66 | Deflector Group | 1 |
| 26***33 | Pin As | 1 |
231-1983 Extension Gp-Main Frame -24-In
| 23***83 | Extension Group-Main Frame; -24-In | 1 |
| 25***97 | Bar | 2 |
| 31***09 | Plate | 2 |
299-7236 Extension Gp-Main Frame
| 29***36 | Extension Group-Main Frame | 1 |
| 31***62 | Plate | 2 |
| 7X***56 | Bolt-Plt; (M16 X 2.0 X 100) | 4 |
339-1628 Extension Gp-Main Frame
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
339-1636 Extension Gp-Main Frame
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 22***38 | Sensor Group-Temperature; (Screed Heat) | 2 |
231-1982 Extension Gp-Main Frame -12-In
| 14***20 | Connector As | 2 |
| 14***85 | Elbow; (45°) | 8 |
| 14***89 | Elbow As | 6 |
215-7553 Extension Gp-Main Frame
| 21***53 | Extension Group-Main Frame | 1 |
| 24***87 | Connector | 16 |
| 26***34 | Hose As-Grease | 10 |
265-6509 Fitting Gp-Grease
| 03***57 | Washer; (13x26x6-mm Thk) | 16 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
346-1709 Flashing Gp -Belting
| 09***22 | Ring-Retaining | 2 |
| 24***04 | Handle | 1 |
| 25***79 | Gate As | 1 |
346-1707 Flashing Gp -Belting
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 22***38 | Sensor Group-Temperature; (Screed Heat) | 2 |
279-2576 Flashing Gp
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 1 |
| 26***33 | Pin As | 1 |
| 27***45 | Bar | 1 |
279-2578 Flashing Gp
| 25***32 | Pad | 2 |
| 25***77 | Support As | 1 |
| 27***78 | Flashing Group | 1 |
279-2579 Flashing Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
279-2577 Flashing Gp
| 24***93 | Stud; (M12x1.75x100-mm) | 48 |
| 24***97 | Nut-Brass; (M12x1.75-Thd) | 96 |
| 24***04 | Nut-Brass; (M14x2-Thd) | 16 |
273-4076 Frame Gp-Main
| 09***22 | Ring-Retaining | 2 |
| 24***04 | Handle | 1 |
| 25***79 | Gate As | 1 |
295-2113 Frame Gp-Screed
| 10***89 | Brace Group | 1 |
| 23***07 | Bracket Group-Support | 1 |
| 29***13 | Frame Group-Screed | 1 |
286-3490 Frame Gp-Screed -Lh
| 11***34 | Bracket As; (Rh) | 1 |
| 11***03 | Bracket As; (Lh) | 1 |
| 28***90 | Frame Group-Screed; -Lh | 1 |
286-3492 Frame Gp-Screed -Lh
| 26***61 | Lock Group-Transport | 1 |
| 27***15 | Arm Group-Tow | 1 |
| 27***97 | Beam Group-Transverse | 1 |
353-9489 Frame Gp-Screed
| 12***96 | Seal; (1.084m) | 0 |
| 12***23 | Seal; (32-cm) | 0 |
| 14***00 | Inlet-Blower | 1 |
286-3491 Frame Gp-Screed -Rh
| 28***91 | Frame Group-Screed; -Rh | 1 |
| 33***96 | Step As | 1 |
| 7F***88 | Pin | 2 |
295-2142 Frame Gp-Screed
| 27***51 | Insulation-Sound Suppression | 1 |
| 27***52 | Insulation-Sound Suppression | 1 |
| 27***53 | Insulation-Sound Suppression | 1 |
292-8814 Frame Gp-Sliding -Rh
| 10***56 | Bearing-Sleeve | 2 |
| 10***85 | Cap | 1 |
| 10***52 | Cap | 1 |
292-8813 Frame Gp-Sliding -Lh
| 00***31 | Cup-Bearing | 4 |
| 00***32 | Cone-Bearing | 2 |
| 10***58 | Shim; (1.5-mm Thk) | 4 |
311-4470 Gate Gp-End
| 10***93 | Pin | 2 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 4 |
| 2D***34 | Bolt-Socket Head; (3/8-16x1-In) | 2 |
311-4480 Gate Gp-End -Folding
| 31***80 | Gate Group-End; -Folding | 1 |
| 34***92 | Guide As | 4 |
| 8T***22 | Washer-Hard-To Lock Carrier Rollers | 8 |
273-9969 Guide Gp-Steering
| 00***31 | Cup-Bearing | 2 |
| 00***32 | Cone-Bearing | 1 |
| 10***91 | Pin | 2 |
278-8234 Hopper Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 5 |
| 17***60 | Roller As | 1 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
263-6004 Hopper Gp
| 11***22 | Bushing-Track | 50 |
| 25***02 | Seal As | 100 |
| 26***04 | Hopper Group | 1 |
345-8116 Hopper Gp
| 34***16 | Hopper Group | 1 |
| 6S***09 | Roller Group-Track Carrier; Track Carrier Roller Group | 2 |
| 7X***56 | Bolt-Plt; (M16 X 2.0 X 100) | 2 |
273-7452 Lines Gp-Grease
| 13***98 | Pad As-Track | 50 |
| 13***90 | Plate-Backing | 49 |
| 13***35 | Plate-Backing | 1 |
250-3370 Lines Gp-Grease
| 21***56 | Ring-Toric | 2 |
| 21***57 | Seal Group-Duo-Cone | 2 |
| 25***70 | Lines Group-Grease | 1 |
263-5961 Lock Gp-Transport
| 10***44 | Track Group | 2 |
| 26***61 | Lock Group-Transport | 1 |
| 26***94 | Bogie Group-Rear | 2 |
316-1660 Mounting Gp-Ballast
| 25***71 | Bar-Tamper; (Main, Rh) | 1 |
| 25***72 | Bar-Tamper; (Main, Lh) | 1 |
| 25***73 | Bar-Tamper; (Sliding, Rh) | 1 |
295-2111 Plate & Heater Gp-Screed
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 27***35 | Clamp | 8 |
| 29***11 | Plate & Heater Group-Screed | 1 |
328-9579 Plate & Heater Gp-Screed
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 27***35 | Clamp | 8 |
| 30***09 | Heater As | 2 |
270-8888 Plate & Heater Gp-Screed
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 27***88 | Plate & Heater Group-Screed | 1 |
| 27***35 | Clamp | 16 |
359-1041 Plate & Heater Gp-Screed -Electric Heat
| 27***88 | Plate & Heater Group-Screed | 1 |
| 27***35 | Universal Joint Group | 2 |
| 29***01 | Conversion Ar-Screed; -Electric Heat | 1 |
273-1160 Plate Gp
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
| 21***53 | Extension Group-Main Frame | 1 |
251-0834 Plate Gp-Screed -Sliding
| 25***34 | Plate Group-Screed; -Sliding | 1 |
| 27***88 | Plate & Heater Group-Screed | 1 |
| 29***36 | Extension Group-Main Frame | 1 |
251-0819 Plate Gp-Screed -Gas
| 25***18 | Burner Group | 1 |
| 25***19 | Plate Group-Screed; -Gas | 1 |
| 26***71 | Box Group-Control; -Burner | 1 |
295-2140 Plate Gp-Screed
| 26***72 | Conversion Ar-Screed; -Lpg Heat | 1 |
| 26***05 | Lines Group-Burner | 1 |
| 27***35 | Universal Joint Group | 2 |
310-9816 Plate Gp-Screed -Rh
| 27***35 | Universal Joint Group | 2 |
| 29***01 | Conversion Ar-Screed; -Electric Heat | 1 |
| 29***02 | Screed Ar | 1 |
310-9817 Plate Gp-Screed -Lh
| 26***87 | Conversion Ar-Screed; -Lpg Heat | 1 |
| 26***06 | Lines Group-Burner | 1 |
| 27***35 | Universal Joint Group | 2 |
287-0269 Plate Gp-Screed
| 25***18 | Burner Group | 1 |
| 26***87 | Conversion Ar-Screed; -Lpg Heat | 1 |
| 26***71 | Box Group-Control; -Burner | 1 |
300-3564 Step Gp
| 29***20 | Extension Group-Screed | 1 |
| 29***44 | Conversion Ar-Screed; -Electric Heat, 250-mm Extension | 1 |
| 30***64 | Step Group | 1 |
262-4108 Structural Ar
| 26***08 | Structural Ar | 1 |
| 29***33 | Extension Group-Screed; -6.5-M | 1 |
| 32***85 | Cover Group-Screed | 1 |
350-6038 Support Gp-Frame
| 24***03 | Extension Ar-Auger | 1 |
| 24***18 | Tube As; (1.8-M) | 1 |
| 32***70 | Extension Ar-Screed; -Electric Heat, 5.5-M | 1 |
231-1956 Support Gp-Frame
| 23***56 | Support Group-Frame | 1 |
| 29***20 | Extension Group-Screed | 1 |
| 29***33 | Extension Group-Screed; -6.5-M | 1 |
360-9844 Support Gp-Frame
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
263-6008 Suppression Gp-Sound
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
270-6763 Ventilation Gp-Paver
| 24***03 | Extension Ar-Auger | 1 |
| 24***18 | Tube As; (1.8-M) | 1 |
| 27***63 | Ventilation Group-Paver | 1 |
Fuel System
250-9118 Burner Gp
| 20***53 | Plate | 1 |
| 25***18 | Burner Group | 1 |
| 6V***98 | Bolt; (M5x0.8x16-mm) | 5 |
339-1609 Burner Gp
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
| 33***09 | Burner Group | 1 |
299-7255 Burner Gp
| 29***55 | Burner Group | 1 |
| 29***29 | Filter-Fuel; (Ultra High Efficiency)(Secondary) | 1 |
| 30***80 | .. Bushing, Filter Group-Fuel; (Ultra High Efficiency) | 1 |
276-0079 Control Gp-Decelerator
| 26***41 | Block | 1 |
| 26***47 | Washer; (13x18x1.5-mm Thk) | 4 |
| 26***48 | Washer; (17x23x1.5-mm Thk) | 1 |
201-7654 Cover Gp-Fuel Tank
| 20***54 | Cover Group-Fuel Tank | 1 |
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
280-1394 Filter Gp-Secondary Fuel
| 27***39 | Seal | 1 |
| 28***94 | Filter Group-Secondary Fuel | 1 |
| 28***37 | Washer | 1 |
174-9570 Filter Gp-Water Sep & Fuel -Primary
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
268-6140 Fitting Gp-Fuel Lines
| 26***40 | Fitting Group-Fuel Lines | 1 |
| 26***45 | Fitting; (Machined) | 4 |
| 26***47 | Washer; (13x18x1.5-mm Thk) | 6 |
292-3780 Injector Gp-Fuel
| 26***45 | Fitting; (Machined) | 8 |
| 26***47 | Washer; (13x18x1.5-mm Thk) | 12 |
| 26***54 | Fitting | 4 |
306-9380 Injector Gp-Fuel
| 26***45 | Fitting; (Machined) | 4 |
| 26***47 | Washer; (13x18x1.5-mm Thk) | 6 |
| 26***54 | Fitting | 2 |
321-3600 Injector Gp-Fuel
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 15***50 | Elbow As | 1 |
| 26***40 | Fitting Group-Fuel Lines | 2 |
268-4206 Lines Gp-Burner
| 10***05 | Plate | 3 |
| 10***54 | Connector-Orfs | 1 |
| 12***09 | Valve-Ball; (Hydraulic Tank Drain) | 1 |
268-4210 Lines Gp-Burner
| 10***05 | Plate | 3 |
| 10***54 | Connector-Orfs | 1 |
| 12***09 | Valve-Ball; (Hydraulic Tank Drain) | 1 |
286-3631 Lines Gp-Burner
| 10***16 | Bolt; (M6x16-mm) | 2 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 2 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
295-2110 Lines Gp-Burner
| 10***16 | Bolt; (M6x16-mm) | 2 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 2 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
268-4205 Lines Gp-Burner
| 26***05 | Lines Group-Burner | 1 |
| 26***45 | Fitting; (Machined) | 8 |
| 26***47 | Washer; (13x18x1.5-mm Thk) | 14 |
308-6532 Lines Gp-Fuel
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 15***76 | Mount-Isolation | 8 |
270-4256 Lines Gp-Fuel
| 10***16 | Bolt; (M6x16-mm) | 2 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 2 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
351-0973 Pump Gp-Fuel
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 15***76 | Mount-Isolation | 8 |
323-3939 Pump Gp-Fuel Injection
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 1 |
| 11***52 | Bolt-Hex Head; (M4x0.7x10mm) | 2 |
| 17***11 | Locknut; (M16x2-Thd) | 1 |
317-8021 Pump Gp-Fuel Injection
| 29***35 | Bulkhead | 1 |
| 29***36 | Nut-Bulkhead; (1-12-Thd, Lh) | 1 |
| 30***27 | Adapter; (Fuel Cap) | 1 |
303-2928 Pump Gp-Fuel Injection
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 15***76 | Mount-Isolation | 8 |
276-8398 Pump Gp-Fuel Injection
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 15***76 | Mount-Isolation | 8 |
278-5319 Pump Gp-Fuel Injection
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***72 | Fitting-Fuel | 1 |
| 22***00 | Seal-O-Ring | 2 |
291-5919 Pump Gp-Fuel Injection
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 15***76 | Mount-Isolation | 8 |
212-3657 Pump Gp-Fuel Prm & Water Sep -Electric-Primary Filter
| 21***57 | Pump Group-Fuel Prm & Water Sep; -Electric-Primary Filter | 1 |
| 24***58 | Tube As | 1 |
| 24***73 | Tube As | 1 |
358-6634 Rail Gp-Fuel -6-Cylinder Engine
| 24***58 | Plate-Gauge | 4 |
| 26***10 | Adjuster Group-Height | 2 |
| 26***14 | Adjuster Group-Height | 2 |
305-6376 Tank Gp-Fuel
| 24***58 | Plate-Gauge | 4 |
| 30***76 | Tank Group-Fuel | 1 |
| 32***19 | Adjuster Group-Height; -Rh | 2 |
Grade References
109-5627 Leveler Gp
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
109-5624 Leveler Gp
| 10***24 | Leveler Group; -30-Ft Grade Reference | 1 |
109-5628 Leveler Gp
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
109-5622 Leveler Gp
| 10***22 | Leveler Group; -40-Ft Grade Reference | 1 |
109-5623 Leveler Gp
| 10***23 | Leveler Group; -30-Ft Grade Reference | 1 |
Hydraulic System
242-2749 Adapter Gp-Motor
| 24***49 | Adapter Group-Motor | 1 |
| 26***92 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 29***49 | Cylinder Group-Hydraulic; -Hopper | 1 |
258-7161 Adapter Gp-Motor
| 25***61 | Adapter Group-Motor; -Vibratory | 1 |
303-4148 Cover Gp
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 18***60 | Head | 1 |
270-6764 Cover Gp
| 00***46 | Elbow; (45 Degree Pipe) | 1 |
| 09***19 | Plug-Pipe | 1 |
| 14***12 | Adapter As | 2 |
270-7226 Cylinder & Mtg Gp-Auger
| 14***75 | Elbow Group | 2 |
| 14***57 | Union Bulkhead; (Orfs) | 2 |
| 14***52 | Union As | 1 |
270-7223 Cylinder & Mtg Gp-Hopper
| 14***75 | Elbow Group | 2 |
| 14***57 | Union Bulkhead; (Orfs) | 2 |
| 14***52 | Union As | 1 |
314-5822 Cylinder & Mtg Gp-Screed Hoist
| 14***75 | Elbow Group | 2 |
| 14***57 | Union Bulkhead; (Orfs) | 2 |
| 14***52 | Union As | 1 |
270-3541 Cylinder & Mtg Gp-Tow Point
| 14***75 | Elbow Group | 2 |
| 14***57 | Union Bulkhead; (Orfs) | 2 |
| 14***52 | Union As | 1 |
268-1692 Cylinder Gp-Hydraulic
| 26***92 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 27***46 | Pump & Mtg Group-Auxiliary | 1 |
| 27***48 | Lines Group-Tamper | 1 |
270-3560 Cylinder Gp-Hydraulic
| 27***31 | Lines Group-Vibratory | 1 |
| 27***32 | Valve & Mtg Group-Vibratory | 1 |
| 27***60 | Cylinder Group-Hydraulic; -Screed Hoist | 1 |
251-0781 Cylinder Gp-Hydraulic
| 25***81 | Cylinder Group-Hydraulic; -Extender | 1 |
| 27***50 | Pump & Mtg Group-Hydraulic Fan | 1 |
| 27***51 | Motor & Mtg Group-Hydraulic Fan | 1 |
8c-9493 Cylinder Gp-Hydraulic
| 26***23 | Hydraulic Ar-Conveyor | 1 |
| 26***24 | Hydraulic Ar-Vibratory | 1 |
| 26***26 | Hydraulic Ar-Fan | 1 |
275-0895 Cylinder Gp-Hydraulic
| 10***05 | Plate | 3 |
| 11***47 | Hose As | 1 |
| 13***17 | Hose As | 1 |
194-7260 Cylinder Gp-Hydraulic
| 19***60 | Cylinder Group-Hydraulic; -Auger, Lh | 1 |
| 25***27 | Cylinder & Mtg Group-Tensioner; -Track Tension | 1 |
| 27***38 | Valve & Mtg Group-Auxiliary | 1 |
194-7259 Cylinder Gp-Hydraulic
| 16***50 | Sleeve-Abrasion; (100-In Each) | 0 |
| 19***59 | Cylinder Group-Hydraulic; -Auger, Rh | 1 |
| 25***63 | Fitting & Mtg Group-Hydraulic; -Front, Lh Frame | 1 |
292-8449 Cylinder Gp-Hydraulic
| 14***27 | Connector Group | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***39 | Connector As. | 1 |
270-4253 Drive Gp-Pump
| 10***43 | Hose As | 1 |
| 10***79 | Hose Assem. | 1 |
| 10***63 | Hose As | 1 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 10***43 | Hose As | 1 |
| 10***79 | Hose Assem. | 1 |
| 10***63 | Hose As | 1 |
258-7190 Fitting & Mtg Gp-Hydraulic -Rear, Rh Frame
| 14***68 | Elbow Group | 1 |
| 14***84 | Elbow As | 4 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 3 |
258-4663 Fitting & Mtg Gp-Hydraulic -Front, Lh Frame
| 10***43 | Hose As | 1 |
| 10***79 | Hose Assem. | 1 |
| 10***63 | Hose As | 1 |
258-4664 Fitting & Mtg Gp-Hydraulic -Front, Rh Frame
| 10***05 | Plate | 3 |
| 10***45 | Clamp | 6 |
| 13***90 | Hose As | 1 |
258-7194 Fitting & Mtg Gp-Hydraulic -Rear, Lh Frame
| 13***48 | Hose As; (Labeled F) | 1 |
| 14***09 | Hose As | 1 |
| 14***60 | Elbow Group | 1 |
269-3836 Hydraulic Ar
| 12***88 | Flange-Split | 4 |
| 12***33 | Elbow | 1 |
| 14***09 | Hose As | 1 |
286-3620 Hydraulic Ar
| 10***05 | Plate | 3 |
| 12***56 | Hose As | 2 |
| 15***28 | Union | 1 |
270-3537 Hydraulic Ar-Auxiliary
| 27***37 | Hydraulic Ar-Auxiliary | 1 |
| 27***51 | Hose As | 2 |
| 6R***28 | Hose As | 2 |
269-7126 Hydraulic Ar-Fan
| 10***03 | Plate-Cover | 5 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***77 | Elbow As. | 1 |
270-3545 Hydraulic Ar-Tamper
| 14***38 | Elbow | 1 |
| 14***12 | Reducer As-Orfs | 1 |
| 14***29 | Tee As-Orfs | 1 |
269-7124 Hydraulic Ar-Vibratory
| 14***58 | Elbow As | 1 |
| 17***15 | Strap; (Dual Clamp) | 1 |
| 19***35 | Hose As | 1 |
270-3543 Lines Gp-Brake & Shift
| 10***23 | Hose As | 1 |
| 17***20 | Strap-Dual Clamp | 2 |
| 27***43 | Lines Group-Brake & Shift | 1 |
286-3635 Lines Gp-Connecting
| 10***23 | Hose As | 1 |
| 17***20 | Strap-Dual Clamp | 2 |
| 27***91 | Hose As | 1 |
270-7217 Lines Gp-Conveyor
| 10***25 | Hose As | 1 |
| 12***95 | Elbow | 2 |
| 14***52 | Elbow As. | 1 |
270-7233 Lines Gp-Cylinder
| 10***05 | Plate | 4 |
| 14***45 | Connector As | 8 |
| 14***35 | Tee, -6 Orb / Orfs | 2 |
286-3629 Lines Gp-Extender
| 10***03 | Plate-Cover | 9 |
| 14***25 | Connector As. | 1 |
| 14***63 | Elbow Group | 1 |
289-5222 Lines Gp-Generator
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 6 |
| 14***72 | Elbow Group | 4 |
302-5989 Lines Gp-Generator Drive
| 11***05 | Hose As; (Main Auxiliary Valve) | 1 |
| 14***26 | Hose As; (Vibe Valve Outlet) | 1 |
| 14***80 | Elbow As | 1 |
276-4805 Lines Gp-Grade & Slope
| 10***05 | Plate | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***45 | Connector As | 2 |
278-7739 Lines Gp-Hopper
| 14***24 | Connector Group | 1 |
| 14***27 | Connector Group | 1 |
| 14***29 | Connector As | 1 |
270-7231 Lines Gp-Hopper
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***08 | Adapter As | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
270-7253 Lines Gp-Hydraulic Fan
| 11***80 | Elbow | 1 |
| 14***27 | Connector Group | 4 |
| 14***72 | Elbow Group | 4 |
278-1868 Lines Gp-Paver Ventilation
| 14***19 | Connector As | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 20***11 | Valve-Check | 1 |
270-3544 Lines Gp-Pump
| 14***17 | Adapter, -12 Orb / -16 Orfs | 2 |
| 14***65 | Elbow | 1 |
| 27***44 | Lines Group-Pump | 1 |
270-7244 Lines Gp-Return
| 10***93 | Flange | 4 |
| 14***28 | Connector Assem. | 2 |
| 14***52 | Elbow As. | 4 |
270-7229 Lines Gp-Screed
| 17***39 | Bolt-Socket Head; (M8x1.25x30-mm) | 4 |
| 24***48 | Coupling As | 1 |
| 25***55 | Motor Group-Gear; (Tamper Control) | 1 |
270-3548 Lines Gp-Tamper
| 17***39 | Bolt-Socket Head; (M8x1.25x30-mm) | 4 |
| 24***12 | Ring | 1 |
| 24***85 | Coupling | 1 |
286-3627 Lines Gp-Tamper
| 09***32 | Ring-Retaining | 1 |
| 17***39 | Bolt-Socket Head; (M8x1.25x30-mm) | 4 |
| 24***49 | Adapter Group-Motor | 1 |
270-3542 Lines Gp-Track Tension
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***74 | Elbow As | 1 |
| 15***50 | Elbow As | 1 |
359-0123 Lines Gp-Vibratory
| 26***31 | Kit-Seal; (Solenoid Valve, Fan) | 1 |
| 26***32 | Coil-Solenoid | 1 |
| 33***55 | Kit-Seal | 1 |
286-3628 Lines Gp-Vibratory
| 28***28 | Lines Group-Vibratory | 1 |
270-3531 Lines Gp-Vibratory
| 26***11 | Kit-Seal; (Paver Ventilation Motor) | 1 |
| 27***31 | Lines Group-Vibratory | 1 |
265-7799 Lines Gp-Vibratory
| 09***32 | Ring-Retaining | 1 |
| 17***39 | Bolt-Socket Head; (M8x1.25x30-mm) | 4 |
| 24***49 | Adapter Group-Motor | 1 |
270-7249 Manifold Gp-Control
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
286-3630 Manifold Gp-Control -Screed
| 10***78 | Bearing-Roller | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
230-9597 Motor & Mtg Gp-Auger
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
302-5990 Motor & Mtg Gp-Generator
| 07***53 | Pin; (Spring) | 2 |
| 10***84 | Piston | 9 |
| 11***65 | Valve-Flushing | 1 |
289-5224 Motor & Mtg Gp-Generator
| 07***53 | Pin; (Spring) | 2 |
| 13***95 | Orifice | 2 |
| 13***57 | Plug | 1 |
270-7251 Motor & Mtg Gp-Hydraulic Fan
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***39 | Connector As. | 1 |
| 14***60 | Elbow Group | 1 |
255-4488 Motor & Mtg Gp-Propel
| 10***20 | Seal-O-Ring | 1 |
| 12***33 | Elbow | 1 |
| 14***45 | Connector As | 1 |
258-7185 Motor & Mtg Gp-Tamper -Vibratory
| 14***72 | Elbow Group | 1 |
| 14***85 | Elbow; (45°) | 1 |
| 25***85 | Motor & Mtg Group-Tamper; -Vibratory | 1 |
258-7186 Motor & Mtg Gp-Tamper
| 25***86 | Motor & Mtg Group-Tamper | 1 |
| 29***05 | Pump Group-Gear; (Hydraulic Fan) | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
258-7162 Motor & Mtg Gp-Tamper -Vibratory
| 10***20 | Seal-O-Ring | 2 |
| 14***72 | Elbow Group | 1 |
| 14***85 | Elbow; (45°) | 1 |
278-0492 Motor & Mtg Gp-Ventilation
| 00***91 | Cup-Roller Bearing | 1 |
| 07***35 | Kit-Bearing; (Auxiliary Pump) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
263-5148 Motor & Mtg Gp-Vibratory -Screed
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 12 |
| 26***60 | Dowel | 4 |
| 26***48 | Motor & Mtg Group-Vibratory; -Screed | 1 |
258-7158 Motor Gp-Gear -Tamper Control
| 03***39 | Seal-O-Ring (Id=9.25mm) | 4 |
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
235-4849 Motor Gp-Gear
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 1J***74 | Ring-Retaining | 1 |
| 20***66 | Bearing As-Roller | 1 |
312-3652 Motor Gp-Gear -Hydraulic Fan
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
| 14***11 | Bolt-Socket Head; (M6x1x16-mm) | 1 |
| 23***60 | Pin-Slotted | 1 |
310-8545 Motor Gp-Piston -Generator
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***78 | Union | 1 |
| 14***05 | Adapter Group | 1 |
190-8789 Motor Gp-Piston -Auger
| 08***56 | 90 Degrees Elbow | 1 |
| 14***34 | Connector Group | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
230-9384 Motor Gp-Piston -Conveyor
| 13***89 | Clip; (Ladder) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 3 |
291-9119 Motor Gp-Piston
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***78 | Union | 1 |
| 14***05 | Adapter Group | 1 |
227-5104 Motor Gp-Piston -Generator
| 00***39 | Adapter-Pipe | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 14***28 | Sensor Group-Temperature; -Hydraulic Oil Temp | 1 |
270-3546 Pump & Mtg Gp-Auxiliary
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
270-7218 Pump & Mtg Gp-Auxiliary
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 25***67 | Valve Group-Bank 2; -Control | 1 |
314-8014 Pump & Mtg Gp-Generator
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***27 | Connector Group | 1 |
| 14***41 | Connector Group | 1 |
289-5221 Pump & Mtg Gp-Generator
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
| 14***67 | Elbow Group; (Each Includes) | 2 |
| 15***81 | Tee As | 1 |
270-7250 Pump & Mtg Gp-Hydraulic Fan
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***41 | Connector Group | 1 |
269-0533 Pump Gp-Piston
| 14***16 | Connector Group | 4 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 2 |
| 15***68 | Tee Group | 2 |
269-0542 Pump Gp-Piston
| 11***80 | Elbow | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***13 | Reducer As.-Orfs | 1 |
285-4088 Pump Gp-Piston
| 27***83 | Seal-O-Ring | 4 |
| 27***88 | Valve Group-Check; (Pilot Operated)(Screed Extension) | 2 |
| 28***88 | Pump Group-Piston; -Propel, Rh | 1 |
289-5227 Pump Gp-Piston -Generator
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 26***55 | Kit-Flow Control Valve | 1 |
230-9385 Pump Gp-Piston
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 10 |
| 14***68 | Elbow Group | 1 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 2 |
269-7127 Tank & Mtg Gp-Hydraulic
| 23***73 | Seal-O-Ring | 4 |
| 26***27 | Tank & Mtg Group-Hydraulic | 1 |
| 30***49 | Plug-Adjustment, Pipe | 1 |
270-7254 Tank Gp-Hydraulic
| 22***84 | Coil As; (24-Volt) | 1 |
| 23***82 | Nut-Special | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
274-5857 Valve & Mtg Gp
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
| 26***51 | Kit-Solenoid Valve; (Auger Raise, Lower) | 2 |
| 26***26 | Kit-Check Valve; (Apron Fold) | 2 |
270-3538 Valve & Mtg Gp-Auxiliary
| 25***77 | Kit-Seal; (Generator Control Valve) | 1 |
| 25***79 | Valve As-Needle | 1 |
| 25***80 | Kit-Seal; (Needle Valve) | 1 |
270-7220 Valve & Mtg Gp-Auxiliary
| 19***67 | Seal-O-Ring | 1 |
| 21***33 | Valve As-Fluid Sampling | 1 |
| 23***61 | Plug; (Blanking) | 1 |
310-8048 Valve & Mtg Gp-Control -Generator
| 21***14 | Seal-O-Ring | 1 |
| 21***74 | Seal & Retainer As | 2 |
| 21***75 | Seal-O-Ring | 1 |
289-5223 Valve & Mtg Gp-Control -Generator
| 26***51 | Kit-Seal; (Solenoid Valve)(Solenoid Valve) | 1 |
| 26***45 | Nut; (1/2-32-Thd) | 1 |
| 27***43 | Kit-Seal; (Solenoid Valve) | 1 |
270-7219 Valve & Mtg Gp-Control
| 27***19 | Valve & Mtg Group-Control; -Parking Brake Manual Release | 1 |
| 30***69 | Valve Group-Solenoid | 1 |
256-2539 Valve & Mtg Gp-Control -Screed Extension
| 03***39 | Seal-O-Ring (Id=9.25mm) | 4 |
| 12***42 | Gasket | 1 |
| 25***39 | Valve & Mtg Group-Control; -Screed Extension | 1 |
270-7222 Valve & Mtg Gp-Counterbalance -Hopper Hoist, Tow Point
| 27***22 | Valve & Mtg Group-Counterbalance; -Hopper Hoist, Tow Point | 1 |
| 30***70 | Coil-Solenoid | 1 |
| 30***71 | Nut; (Coil) | 1 |
270-3559 Valve & Mtg Gp-Flow Control
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 27***59 | Valve & Mtg Group-Flow Control; -Ventilation | 1 |
| 31***18 | Valve-Servo | 2 |
270-3540 Valve & Mtg Gp-Track Tensioner
| 1T***43 | Ball Bearing | 2 |
| 24***43 | Plug | 1 |
| 24***63 | Shaft As-Drive | 1 |
270-3532 Valve & Mtg Gp-Vibratory
| 09***01 | Bolt-Socket Head; (M8x1.25x40-mm) | 6 |
| 1T***43 | Ball Bearing | 2 |
| 24***43 | Plug | 1 |
252-9467 Valve Gp-Bank 2 -Control
| 1T***43 | Ball Bearing | 2 |
| 24***43 | Plug | 1 |
| 24***80 | Shaft As-Drive | 1 |
276-2261 Valve Gp-Control
| 26***49 | Housing Group-Eccentric Weight; -Main, Lh | 2 |
| 27***61 | Valve Group-Control; -Generator | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 8 |
270-3549 Valve Gp-Control -2-Bank
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 24***05 | Shaft Group-Vibratory | 1 |
| 26***49 | Housing Group-Eccentric Weight; -Main, Lh | 1 |
269-0535 Valve Gp-Control
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 24***05 | Shaft Group-Vibratory | 1 |
| 24***36 | Key-Rectangular; (Square) | 2 |
248-1348 Valve Gp-Control -Piston Pump
| 1T***43 | Ball Bearing | 2 |
| 24***43 | Plug | 1 |
| 24***80 | Shaft As-Drive | 1 |
292-9094 Valve Gp-Counterbalance -Hopper Hoist, Tow Point
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 4 |
| 26***85 | Housing Group-Eccentric Weight | 2 |
| 26***11 | Shaft Group-Vibratory | 2 |
277-4694 Valve Gp-Fluid Sampling -Engine Oil
| 11***06 | Stud-Ball | 4 |
| 17***55 | Pin | 2 |
| 20***70 | Spring-Gas | 2 |
276-6041 Valve Gp-Pump Control
| 17***55 | Pin | 2 |
| 24***14 | Rod | 2 |
| 27***41 | Valve Group-Pump Control; -Generator | 1 |
294-0802 Valve Gp-Solenoid
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
| 11***87 | Start Switch Assembly; (Key)(Engine) | 1 |
310-8017 Valve Gp-Solenoid
| 24***34 | Steering Column Group | 1 |
| 31***17 | Valve Group-Solenoid; -Piston Pump | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
305-5369 Valve Gp-Solenoid
| 28***24 | Steering Column Group | 1 |
| 30***69 | Valve Group-Solenoid | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
269-0589 Valve Gp-Solenoid -Screed
| 11***77 | Bumper-Rubber | 4 |
| 14***03 | Screw-Button Head; (M10x1.5x30-mm) | 6 |
| 14***64 | Seal; (142-cm) | 0 |
276-6042 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
242-2751 Vibratory Gp -Front, Rh
| 23***39 | Floor Mat | 2 |
| 24***51 | Vibratory Group; -Front, Rh | 1 |
| 27***41 | Floor Mat | 1 |
242-2752 Vibratory Gp -Rear, Lh
| 15***93 | Screw-Button Head; (M4x0.7x12-mm) | 2 |
| 21***13 | Handle | 2 |
| 24***52 | Vibratory Group; -Rear, Lh | 1 |
263-2536 Vibratory Gp -Hydraulic
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
265-0684 Vibratory Gp
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
242-2750 Vibratory Gp -Front, Lh
| 24***50 | Vibratory Group; -Front, Lh | 1 |
| 27***48 | Control Group-Unprgmed Monitor; -Advisor | 1 |
265-8847 Vibratory Gp
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***87 | Switch As-Toggle; (Screed Raise/Hld/Float) | 1 |
242-2753 Vibratory Gp -Rear, Rh
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
Implements
251-0770 Bar Gp-Tamper
| 08***36 | Clip-Internal; (Water Temperature Regulator) | 1 |
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
| 24***09 | Shaft As | 1 |
328-9581 Blade & Heater Gp-Tamper
| 32***47 | Support As | 1 |
| 32***52 | Pad | 2 |
| 32***81 | Blade & Heater Group-Tamper; -750-mm Extension | 1 |
295-2112 Blade & Heater Gp-Tamper
| 19***29 | Bolt-Shoulder; (M8x1.25-Thd) | 2 |
| 19***56 | Plate; (Scale) | 2 |
| 29***12 | Blade & Heater Group-Tamper | 1 |
287-2280 Blade & Heater Gp-Tamper
| 09***41 | Ring-Retaining | 1 |
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
| 24***12 | Seal-Shaft | 2 |
339-1646 Blade & Heater Gp-Tamper
| 19***08 | Bar | 2 |
| 19***09 | Pin As | 1 |
| 29***83 | Roller Group-Push | 1 |
295-2141 Blade & Heater Gp-Tamper
| 26***43 | Manifold As-Gas | 1 |
| 26***46 | Fitting | 8 |
| 26***47 | Washer; (13x18x1.5-mm Thk) | 8 |
339-1673 Blade & Heater Gp-Tamper
| 19***08 | Bar | 2 |
| 19***09 | Pin As | 1 |
| 30***88 | Roller Group-Push | 1 |
276-5032 Cylinder & Mtg Gp-Hopper
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 10***64 | Shaft As | 2 |
| 16***17 | Roller | 2 |
288-9424 Extension Ar -Electric Heat, 7-M
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 10***64 | Shaft As | 2 |
| 16***17 | Roller | 2 |
241-9103 Extension Ar-Auger
| 24***03 | Extension Ar-Auger | 1 |
350-6036 Extension Ar-Screed -Electric Heat, 6.5-M
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***08 | Bushing | 2 |
339-9631 Extension Ar-Screed -Electric Heat, 5.5-M
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 19***78 | Pad | 2 |
| 27***98 | Bracket As; (Rh) | 1 |
288-9422 Extension Ar-Screed -Electric Heat, 5.5-M
288-9425 Extension Ar-Screed -Lpg
| 09***76 | Nut; (M14x2-Thd) | 8 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 22 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
328-9570 Extension Ar-Screed -Electric Heat, 5.5-M
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
| 24***88 | Seal; (100x112x12-mm) | 1 |
| 24***89 | Seal; (140x155x16-mm) | 1 |
288-9426 Extension Ar-Screed -Electric Heat, 6.5-M
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 27***35 | Clamp | 22 |
| 28***11 | Blade; (Main, Lh) | 1 |
341-2289 Extension Ar-Screed -Electric Heat, 6.5-M
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
| 14***76 | Plug-Connector | 1 |
328-9593 Extension Ar-Screed -Electric Heat, 6.5-M
| 14***80 | Pin | 2 |
| 26***41 | Wall As | 1 |
| 26***43 | Tube As | 1 |
360-3420 Extension Ar-Screed -8-M
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
288-9427 Extension Ar-Screed -Lpg
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
339-1701 Extension Ar-Screed -Lpg Heat
| 26***41 | Wall As | 1 |
| 33***01 | Extension Ar-Screed; -Lpg Heat | 1 |
| 33***85 | Tube As | 1 |
288-9428 Extension Ar-Screed
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
361-0616 Extension Ar-Screed
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
| 10***23 | Cable As; (Grade) | 1 |
361-0615 Extension Ar-Screed
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
328-9606 Extension Ar-Screed -Electric Heat, 7-M
| 14***80 | Pin | 2 |
| 26***43 | Tube As | 1 |
| 26***44 | Wall As | 1 |
339-9632 Extension Ar-Screed -Electric Heat, 6.5-M
| 10***63 | Clamp | 1 |
| 11***98 | Plug | 1 |
| 11***08 | Bushing | 2 |
339-9633 Extension Ar-Screed -Electric Heat, 7-M
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***08 | Bushing | 2 |
359-1040 Extension Ar-Screed -Electric Heat, 8-M
| 20***30 | Control Group-Grade & Slope | 1 |
| 23***08 | Link; (6-Pin) | 2 |
| 25***30 | Mount As | 2 |
339-1702 Extension Ar-Screed -Lpg
| 26***44 | Wall As | 1 |
| 33***02 | Extension Ar-Screed; -Lpg | 1 |
| 33***85 | Tube As | 1 |
288-9423 Extension Ar-Screed -7-M
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
288-9421 Extension Ar-Screed -Lpg Heat
| 28***21 | Extension Ar-Screed; -Lpg Heat | 1 |
282-8513 Extension Gp-Screed -5.5-M
| 10***04 | Tube; (1.1-M) | 1 |
| 10***34 | Tube As | 1 |
| 10***49 | Collar | 2 |
282-8511 Extension Gp-Screed -7-M
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
282-8510 Extension Gp-Screed -6.5-M
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
282-8509 Extension Gp-Screed
| 25***29 | Mount As | 2 |
| 25***30 | Mount As | 2 |
| 25***80 | Sensor Group-Sonic; -Averaging Ski | 1 |
282-8514 Extension Gp-Screed -6.5-M
| 10***04 | Tube; (1.1-M) | 1 |
| 10***34 | Tube As | 1 |
| 10***49 | Collar | 2 |
304-5238 Extension Gp-Screed -8-M
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
| 10***86 | Switch Group-Toggle; (Parking Brake Override Control) | 1 |
292-8833 Extension Gp-Screed -6.5-M
| 22***45 | Film-Warning; (Shock Hazard) | 1 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
| 22***72 | Film; (Warning) (High Pressure Cyl) (Hydraulic Service Center) | 2 |
282-8512 Extension Gp-Screed
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
291-8020 Extension Gp-Screed
| 29***20 | Extension Group-Screed | 1 |
| 29***58 | Hinge As | 2 |
| 30***81 | Door | 1 |
304-5239 Extension Gp-Screed -7-M
| 08***77 | Adapter | 1 |
| 1G***70 | Extension-Curve | 1 |
| 1G***79 | Hose As | 1 |
265-0685 Housing Gp-Eccentric Weight
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
| 26***85 | Housing Group-Eccentric Weight | 1 |
| 29***22 | Film-Danger; (Shock, Electrocution Hazard) | 7 |
263-5150 Housing Gp-Eccentric Weight -Main, Rh
| 26***50 | Housing Group-Eccentric Weight; -Main, Rh | 1 |
| 26***96 | Film-Warning; (Fire Hazard, Read Omm) | 2 |
| 26***96 | Film-Warning; (Hot Surface) | 4 |
263-5149 Housing Gp-Eccentric Weight -Main, Lh
| 26***49 | Housing Group-Eccentric Weight; -Main, Lh | 1 |
| 28***78 | Connector | 1 |
| 28***79 | Connector As | 1 |
263-5151 Housing Gp-Eccentric Weight -Extension
| 18***68 | Plate-Serial Number | 1 |
| 1P***07 | Film-Symbol; 2 On Bottom Of Upper Frame Below Engine. 2 On Front Of Upper Frame Above Boom Articulation | 2 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
285-9947 Housing Gp-Eccentric Weight
| 28***47 | Housing Group-Eccentric Weight | 1 |
| 31***68 | Kit-Diaphragm | 1 |
| 31***69 | Kit-Valve | 1 |
310-0808 Indicator Gp-Tow Point
| 15***02 | Spacer; (11x20x15-mm Thk) | 2 |
| 16***00 | Connector As | 1 |
| 19***88 | Clip | 2 |
305-5869 Manifold Gp-Fuel
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
325-4950 Plate Gp-Slide
| 00***14 | Coupling-Pipe | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 09***12 | Clip | 1 |
275-2449 Roller Ar-Push
| 27***49 | Roller Ar-Push | 1 |
301-7385 Roller Ar-Push
| 30***85 | Roller Ar-Push | 1 |
301-6988 Roller Gp-Push
| 30***88 | Roller Group-Push | 1 |
292-0983 Roller Gp-Push
| 29***83 | Roller Group-Push | 1 |
242-2677 Shaft Gp-Drive
| 24***77 | Shaft Group-Drive | 1 |
296-9358 Shaft Gp-Vibratory -Eccentric, Lh
| 29***58 | Shaft Group-Vibratory; -Eccentric, Lh | 1 |
265-6611 Shaft Gp-Vibratory
| 26***11 | Shaft Group-Vibratory | 1 |
296-9357 Shaft Gp-Vibratory -Eccentric, Rh
| 29***57 | Shaft Group-Vibratory; -Eccentric, Rh | 1 |
359-1038 Tamper Gp-Screed
| 35***38 | Tamper Group-Screed | 1 |
251-0764 Tamper Gp-Screed
| 25***64 | Tamper Group-Screed | 1 |
292-4011 Tamper Gp-Screed -Rh
| 29***11 | Tamper Group-Screed; -Rh | 1 |
292-4010 Tamper Gp-Screed -Lh
| 29***10 | Tamper Group-Screed; -Lh | 1 |
269-5142 Tube Gp-Extension -Sliding
| 26***42 | Tube Group-Extension; -Sliding | 1 |
269-5145 Tube Gp-Extension -Sliding
| 26***45 | Tube Group-Extension; -Sliding | 1 |
251-0767 Tube Gp-Extension -Telescoping
| 25***67 | Tube Group-Extension; -Telescoping | 1 |
340-0125 Tube Gp-Extension -Sliding
| 34***25 | Tube Group-Extension; -Sliding | 1 |
339-9762 Tube Gp-Extension -Sliding
| 33***62 | Tube Group-Extension; -Sliding | 1 |
Lubrication System
277-2912 Filter Gp-Engine Oil
| 22***44 | Gasket; (Engine Oil Filter Base) | 3 |
| 23***51 | Plate; (Blanking) | 2 |
| 27***38 | Gasket | 2 |
277-4262 Pump Gp-Engine Oil
| 27***00 | Gasket-Housing | 1 |
| 27***62 | Pump Group-Engine Oil | 1 |
| 28***39 | Cooler-Oil; (Engine) | 1 |
Machine Arrangement
262-4113 Chassis Ar
| 26***13 | Chassis Ar | 1 |
| 26***04 | Hopper Group | 1 |
| 26***07 | Door Group-Access | 1 |
262-4127 Common Ar
| 26***05 | Conveyor Ar-Drag & Auger | 1 |
| 26***06 | Installation Ar-Engine | 1 |
| 26***08 | Structural Ar | 1 |
328-9592 Conversion Ar-Screed -Electric Heat, 750-Mm Extension
| 03***57 | Washer; (13x26x6-mm Thk) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
295-2103 Conversion Ar-Screed
| 29***03 | Conversion Ar-Screed | 1 |
| 29***11 | Plate & Heater Group-Screed | 1 |
| 29***12 | Blade & Heater Group-Tamper | 1 |
299-7244 Conversion Ar-Screed -Electric Heat, 250-Mm Extension
| 29***17 | Wiring Group-Screed | 1 |
| 29***40 | Plate Group-Screed | 1 |
| 29***41 | Blade & Heater Group-Tamper | 1 |
295-2101 Conversion Ar-Screed -Electric Heat
| 26***07 | Control Group-Burner; (Rh) | 1 |
| 26***33 | Control Group-Burner; (Lh) | 1 |
| 26***71 | Box Group-Control; -Burner | 1 |
266-3172 Conversion Ar-Screed -Lpg Heat
| 26***71 | Box Group-Control; -Burner | 1 |
| 26***72 | Conversion Ar-Screed; -Lpg Heat | 2 |
265-3787 Conversion Ar-Screed -Lpg Heat
| 09***22 | Ring-Retaining | 2 |
| 09***85 | Locknut; (M16x2-Thd) | 2 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 4 |
295-2096 Conversion Gp-Screed -Fuel Fired Heater
| 29***96 | Conversion Group-Screed; -Fuel Fired Heater | 1 |
| 32***79 | Plate & Heater Group-Screed; -750-mm Extension | 1 |
| 32***81 | Blade & Heater Group-Tamper; -750-mm Extension | 1 |
295-2097 Conversion Gp-Screed -Fuel Fired Heater
| 24***93 | Stud; (M12x1.75x100-mm) | 20 |
| 24***95 | Support As | 2 |
| 24***32 | Support As; (Burner) | 2 |
314-7786 Generator Ar-Hydraulic
| 28***20 | Generator Group; -Hydraulic | 1 |
| 28***21 | Pump & Mtg Group-Generator | 1 |
| 28***22 | Lines Group-Generator | 1 |
270-6762 Generator Ar-Hydraulic
| 24***93 | Stud; (M12x1.75x100-mm) | 40 |
| 24***95 | Support As | 4 |
| 24***32 | Support As; (Burner) | 4 |
306-5155 Kit-Maintenance
| 29***02 | Wiring Group-Hydraulic Generator | 1 |
| 30***76 | Generator Group; -Hydraulic | 1 |
| 30***89 | Lines Group-Generator Drive | 1 |
295-2102 Screed Ar
| 26***84 | Vibratory Group | 1 |
| 26***99 | Lines Group-Vibratory | 1 |
| 29***02 | Screed Ar | 1 |
295-2104 Screed Ar
| 26***84 | Vibratory Group | 1 |
| 26***99 | Lines Group-Vibratory | 1 |
| 26***47 | Vibratory Group | 1 |
339-1637 Screed Ar
| 27***12 | Filter Group-Engine Oil; -Engine | 1 |
| 27***39 | Pump Group-Water | 1 |
| 27***14 | Housing Group-Front | 1 |
339-1643 Screed Ar
| 24***19 | Engine Ar-Primary | 1 |
| 27***50 | Mounting Group-Engine Flexible | 1 |
| 27***53 | Drive Group-Pump | 1 |
281-6251 Screed Ar
| 25***66 | Deflector Group | 1 |
| 25***68 | Adjuster Group-Manual | 1 |
| 25***70 | Lines Group-Grease | 1 |
Operator Station
270-4013 Canopy Gp
| 17***11 | Locknut; (M16x2-Thd) | 4 |
| 24***09 | Damper | 8 |
| 25***38 | Pad | 4 |
272-7051 Console Gp-Operator
| 13***64 | Bushing | 2 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
| 19***91 | Bearing-Flange | 2 |
269-2817 Console Gp-Operator
| 13***64 | Bushing | 2 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
| 19***91 | Bearing-Flange | 2 |
282-9652 Control Gp-Steering
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 2 |
| 23***51 | Seat Group-Suspension; -Vinyl | 2 |
282-9653 Control Gp-Steering
| 19***32 | Kit-Foam Back | 1 |
| 20***36 | Kit-Damper | 1 |
| 20***37 | Kit-Seat; (Indicators) | 1 |
284-8905 Control Gp-Unprgmed Monitor -Advisor
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 08***11 | Ring | 3 |
| 14***91 | Steering Wheel As | 1 |
263-6011 Floor Mat Gp
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 08***11 | Ring | 3 |
| 14***91 | Steering Wheel As | 1 |
292-0956 Guard Gp-Vandalism
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 2 |
| 25***01 | Drive As; (Rh) | 1 |
132-3090 Lever Gp-Propel
| 13***90 | Lever Group-Propel | 1 |
| 27***40 | Kit-Seal; (Pump Drive) | 1 |
| 27***41 | Kit-Bearing | 1 |
262-4125 Operator Ar
| 25***88 | Motor & Mtg Group-Propel | 1 |
| 26***25 | Operator Ar | 1 |
| 27***34 | Pump Group-Dual Propel | 1 |
348-3321 Panel Gp-Instrument
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 0 |
| 22***76 | Pump Group-Hand; -Manual Brake Release | 1 |
295-0996 Panel Gp-Instrument
| 10***60 | Hose As | 1 |
| 11***95 | Hose As | 1 |
| 12***09 | Valve-Ball; (Hydraulic Tank Drain) | 1 |
326-6137 Panel Gp-Instrument
| 12***88 | Flange-Split | 8 |
| 14***15 | Connector As | 3 |
| 14***30 | Connector As | 1 |
261-7148 Pedal Gp-Governor
| 22***15 | Kit-Seal; (Check Valve)(Manual Brake Release Hand Pump) | 1 |
| 23***43 | Knob | 1 |
| 26***48 | Pedal Group-Governor; -Electronic | 1 |
272-0395 Platform Gp-Operator -Lh
| 10***55 | Plate | 1 |
| 16***89 | Bolt-Hex Head; (M16x2x55mm) | 4 |
| 17***24 | Bar | 2 |
315-3700 Platform Gp-Operator -Slide
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
| 21***04 | Bolt-Socket Head; (7/16-20x4.5-In) | 2 |
272-1764 Platform Gp-Operator
| 01***41 | Setscrew-Socket | 3 |
| 27***64 | Platform Group-Operator | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
269-2562 Platform Gp-Operator -Rh
| 10***55 | Plate | 1 |
| 16***89 | Bolt-Hex Head; (M16x2x55mm) | 4 |
| 17***24 | Bar | 2 |
286-3618 Platform Gp-Operator
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***47 | Tube As | 1 |
235-3151 Seat Gp-Suspension -Vinyl
| 19***48 | Conveyor Group-Drag | 2 |
| 21***70 | Footshaft Group | 2 |
| 23***51 | Seat Group-Suspension; -Vinyl | 1 |
199-4298 Seat Gp-Suspension -Vinyl
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 28***79 | Bar-Side | 232 |
| 28***80 | Foam Insulation; 40 X 60 X 644 mm, Bar-Side | 116 |
247-3134 Steering Column Gp
| 10***85 | Plate | 2 |
| 10***91 | Pipe | 2 |
| 10***96 | Plate | 1 |
283-8324 Steering Column Gp
| 10***85 | Plate | 2 |
| 10***91 | Pipe | 2 |
| 10***96 | Plate | 1 |
Power Train
308-6407 Drive Gp-Final
| 05***20 | Pin-Spring | 58 |
| 12***46 | Bar-Feeder | 29 |
| 28***21 | Chain Group-Conveyor | 1 |
265-7279 Drive Gp-Hydrostatic
| 10***56 | Rod; (Prop) | 3 |
| 11***77 | Bumper-Rubber | 4 |
| 12***27 | Spacer; (9x14x3.5-mm Thk) | 2 |
270-3533 Hydraulic Ar-Propel
| 10***99 | Sprocket As; (12-Teeth) | 2 |
| 13***92 | Key-Square | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
270-3536 Lines Gp-Propel
| 10***99 | Sprocket As; (12-Teeth) | 2 |
| 13***92 | Key-Square | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
270-3534 Pump Gp-Dual Propel
| 27***34 | Pump Group-Dual Propel | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
Service Equipment And Supplies
303-8783 Box Gp-Tool
| 30***83 | Box Group-Tool | 1 |
290-2116 Film Gp
| 29***16 | Film Group | 1 |
278-0358 Lines Gp-Spray Down
| 27***58 | Lines Group-Spray Down | 1 |
7r-4741 Lines Gp-Spray Down
| 7R***41 | Lines Group-Spray Down | 1 |
309-1496 Plate & Film Gp
| 30***96 | Plate & Film Group | 1 |
265-6503 Plate & Film Gp
| 26***03 | Plate & Film Group | 1 |
286-3619 Plate & Film Gp
| 28***19 | Plate & Film Group | 1 |
266-4529 Pump & Motor Gp-Washdown
| 26***29 | Pump & Motor Group-Washdown; -Water-Emulsion-Diesel Fuel | 1 |
278-0357 Reel Gp-Washdown Hose
| 27***57 | Reel Group-Washdown Hose | 1 |
270-6875 Washdown Gp
| 27***75 | Washdown Group; -Diesel Fuel | 1 |
270-4461 Washdown Gp-Ecology
| 27***61 | Washdown Group-Ecology | 1 |
Slope And Grade Control
272-0697 Beam Gp-Transverse
| 27***97 | Beam Group-Transverse | 1 |
298-0647 Cable Gp-Control
| 29***47 | Cable Group-Control | 1 |
298-0648 Cable Gp-Control
| 29***48 | Cable Group-Control | 1 |
298-0645 Control Gp-Grade & Slope
| 29***45 | Control Group-Grade & Slope | 1 |
209-3130 Control Gp-Grade & Slope
| 20***30 | Control Group-Grade & Slope | 1 |
298-0642 Sensor Gp-Grade
| 29***42 | Sensor Group-Grade | 1 |
282-8520 Sensor Gp-Sonic
| 28***20 | Sensor Group-Sonic | 1 |
258-6580 Sensor Gp-Sonic -Averaging Ski
| 25***80 | Sensor Group-Sonic; -Averaging Ski | 1 |
257-6255 Ski Gp-Averaging
| 25***55 | Ski Group-Averaging | 1 |
Undercarriage
269-2213 Bogie Gp-Center
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
269-2216 Bogie Gp-Front
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
269-0294 Bogie Gp-Rear
| 10***90 | Extension As | 1 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
256-5327 Cylinder & Mtg Gp-Tensioner
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
343-8336 Guide Gp-Track
| 09***85 | Locknut; (M16x2-Thd) | 4 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 8 |
| 13***82 | Bolt; (M16x2x100-mm) | 4 |
269-6159 Idler Gp-Front
| 10***81 | Tube As; -Ski Tow | 1 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
222-3058 Link As-Track
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
6s-3609 Roller Gp-Track Carrier
| 25***70 | Bar Group-Tamper | 1 |
| 25***19 | Plate Group-Screed; -Gas | 1 |
| 26***03 | Plate & Film Group | 1 |
269-0296 Roller Gp-Track Carrier
| 26***96 | Roller Group-Track Carrier | 1 |
| 28***33 | Wiring Group-Heater | 1 |
| 28***69 | Plate Group-Screed | 1 |
281-8339 Roller Gp-Track-Single Flange
| 28***39 | Roller Group-Track-Single Flange | 1 |
| 28***69 | Plate Group-Screed | 1 |
| 28***80 | Blade & Heater Group-Tamper | 1 |
105-6644 Track Gp
| 09***41 | Ring-Retaining | 1 |
| 10***44 | Track Group | 1 |
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
308-6408 Undercarriage Ar
| 09***41 | Ring-Retaining | 1 |
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
| 24***07 | Shaft As | 1 |
AP-655D serial number reference
The PIN plate is mounted on the paver frame, typically on the left side near the operator's platform - check the frame rail near the engine compartment access if it is not visible from the platform. Read it as an 8-character PIN: the first 3 characters are the serial prefix (identifies the model and production/configuration block), followed by a sequence number. Match the 3-character prefix (GNZ, GNN, MAN, or MAT) to the parts and service literature covering that S/N range before ordering parts, since sub-assemblies and part numbers change between prefixes. Caterpillar later reused the bare name "AP655" (no D suffix) for a differently engineered later-generation paver - that product uses unrelated serial prefixes and its literature does not apply here.
| Prefix | Identifies | Notes |
|---|---|---|
| GNZ | AP-655D Asphalt Paver, early production run | Serial range GNZ00001-up. Powered by the C6.6 engine (C6E engine-arrangement pairing). One of two early-production prefixes for this model, grouped together with GNN in lubrication and parts references. Exact undercarriage type (steel track vs Mobil-Trac rubber belt) is not clearly tied to this prefix specifically - confirm with your dealer using the actual PIN. |
| GNN | AP-655D Mobil-Trac Asphalt Paver (rubber track belt undercarriage) | Serial range GNN00001-up. Powered by the C6.6 engine. The machine-arrangement title for this prefix specifically identifies it as the Mobil-Trac (rubber track belt) configuration, paired with GNZ as the other early-production prefix. |
| MAN | AP-655D Asphalt Paver, later production run | Serial range MAN1-up (component change point also seen at MAN345-up). Paired with the C6E1-up engine arrangement (C6.6 engine), same pairing pattern as MAT. Undercarriage type is not confirmed for this prefix specifically - confirm with your dealer using the actual PIN. |
| MAT | AP-655D Steel Track Asphalt Paver | Serial range MAT00001-up (also seen as MAT1-up), paired with the C6E1-up engine arrangement (C6.6 engine). The machine-arrangement title for this prefix specifically identifies it as the steel-track undercarriage configuration. |
Frequently asked questions
What engine powers the Cat AP-655D asphalt paver?
A Cat C6.6 ACERT diesel, rated about 174 hp (130 kW) gross and 166 hp (124 kW) net, per the factory spec sheet.
What is the operating weight of the AP-655D?
About 19,165 kg (42,252 lb) with the AS4251C screed fitted. Actual weight varies with undercarriage choice (Mobil-trac vs. steel track) and screed width configuration.
What replaced the Cat AP-655D?
Caterpillar dropped the D suffix and moved to a bare AP655/AP655F designation for the next generation. That generation uses a different engine family under Tier 4 Final emissions rules, not a straight carryover of the C6.6 ACERT driveline, so treat it as a distinct platform rather than a same-parts successor.
What AP-655D owners discuss
How does the C6.6 ACERT engine in the AP-655D hold up under everyday paving duty?
The turbocharged C6.6 (129 kW / 174 hp) is generally described as a solid, reliable performer under steady paving load. The two recurring complaints are HEUI-style fuel injectors wearing over time (rough idle, mild power loss, or light smoke) and finicky DPF/regen behavior on units that spend long stretches idling or at low load between passes, a duty cycle this class of paver naturally falls into. Clean fuel filters and quality diesel are repeatedly cited as the best defense against injector deposits. Treated as normal maintenance items, not a batch defect, though severity varies by series and hours.
What wears out first on the Mobil-trac rubber undercarriage versus the steel-track option?
Rubber Mobil-trac belts commonly run somewhere around 1,200 to 1,600 hours before replacement, varying with mix abrasiveness and site conditions, and track tension plus guide-lug alignment need periodic checks to avoid uneven edge wear. Steel track (with rubber pad inserts where fitted) is described as more rigid and better suited to coarse or abrasive mixes and rough subgrades, at the cost of a harsher ride and more marking on finished surfaces. Neither option is flagged as a chronic failure point, just a duty-cycle tradeoff to plan around.
Are there known quirks with the electrically heated screed?
Two issues show up repeatedly: corroded or loosened electrical connections at the heating elements causing uneven or slow heat-up, and individual thermostat or heating-coil failures rather than a full harness fault. The consensus fix is to clean and re-torque terminal connections first, then isolate and replace the failed element or thermostat rather than assuming a wiring-harness problem. Screed plate wear itself is the fastest-wearing mechanical item on the whole machine and should be checked alongside the heating system.
What should I know about the sonic/ski grade-control sensors before relying on auto mode?
Operators consistently note the sonic feed and ski sensors are angle- and line-of-sight sensitive. Shifting the screed extenders, changing auger height, or adjusting paving speed all change what the sensor sees of the material pile, so the sensor aim or averaging setup needs to be rechecked after any of those adjustments. Left uncorrected, head-of-material control drifts even though nothing is actually broken. This is treated as expected sensor behavior to manage, not a fault to chase electrically.
What comes up about the conveyor and auger drive system?
The independently controlled left/right hydraulic conveyor and auger drives are noted as a wear-reduction feature, since each side only needs to run as fast as the head of material demands rather than at full speed continuously. Where wear does show up on high-hour units it's on the mix-handling hardware itself: floor plates warping, auger flights going thin or pointed, conveyor chains sagging, and worn bearing seals letting mix into the drive components. These are described as normal high-hour wear items across this class of paver rather than issues specific to one series.
Is it safe to keep working through repeated DPF regen warnings or a derate on the C6.6?
A single stationary regen mid-shift when the machine prompts for it is considered normal and fine to run. Repeatedly overriding or ignoring the warning until the engine drops into a hard derate is what leads to bigger problems, since accumulated soot can foul injectors and turbo components downstream. If a regen won't complete or the warning re-triggers shortly after, treat it as a sensor, injector, or exhaust-system fault rather than something to keep resetting. Have your dealer verify the emissions and fuel system before continuing to run the machine under repeated derate conditions.
What should I check when buying a used AP-655D?
Measure screed plate thickness at all four corners: new runs about 13 mm (0.5 in), and roughly 6 mm (0.25 in) remaining is considered usable life. Uneven thickness side to side points to a twisted frame or misaligned screed, not just normal wear. Inspect auger bushings, shafts, bearings, and flights, and check for binding thickness-control screws, a sign of worn bushings. Check conveyor chain sag and floor-plate condition, screed heater function, and grade/ski sensor calibration. Note whether the unit is Mobil-trac or steel-track and how many hours are on the belts against typical replacement life, and confirm the serial prefix falls in the GNZ/GNN/MAN/MAT range to verify true AP-655D identity rather than a later reused-name unit. Have your dealer verify hydraulic, structural, and emissions-system condition before purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific AP-655D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.