Caterpillarasphalt paver
Caterpillar AP-655C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar AP-655C is a rubber-tracked, Mobil-Trac highway-class asphalt paver from the early-to-mid 2000s generation of Cat's AP-655 line, identified by AYP, CDG, and CKR serial number prefixes. It runs a Cat 3056/3056E diesel inline-6, roughly 5.9-6.0 L displacement, producing about 118-130 kW (158-174 hp) depending on configuration. Operating weight runs approximately 18,398-19,166 kg (40,560-42,252 lb). Cat offered the AP-655C with either the AS2251 diesel-heated or AS3251C electric-heated Extend-A-Mat screed, giving a paving width range of 2.4-6.25 m (8-20.5 ft), with a top travel speed near 14.5 km/h (9 mph). It sits in the modern Cat-branded AP-655 Mobil-Trac lineage that followed Caterpillar's paving-products business built on the earlier Barber-Greene line, and it was later replaced by the AP-655D.
Across the AP-655 line, the C-series ran the 3056/3056E without exhaust aftertreatment, keeping the drivetrain mechanically simple compared to later emissions-regulated engines. The AP-655D carried a similar concept forward through the 2000s and into the mid-2010s before the F-series introduced Cat C4.4 and C7.1 ACERT power with an integrated screed generator, and today's bare-name AP655/AP655F continue that re-engineered platform rather than acting as a direct letter-suffix successor to the C-series. In the used and parts market, the AP-655C remains attractive to contractors who want a proven Mobil-Trac paver without the regeneration, DEF, or aftertreatment complexity of Tier 4 machines, and its 3056E shares engine-family commonality with other Cat industrial and generator applications, which keeps engine parts and service knowledge broadly accessible even as the model ages out of current production.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar AP-655C specifications
Engine
| Engine model | Cat 3056 / 3056E, inline-6 diesel (turbocharged, aftercooled on the 3056E variant) |
| Power | Approx. 118-130 kW (158-174 hp) gross, varies by model year and rating |
| Displacement | 5.9-6.0 L (365-366 cu in) |
| Cylinders | 6, inline |
| Emissions tier | Not documented for this exact serial range (AYP-prefix machine, mechanical-era diesel) - verify with your dealer |
Weights
| Operating weight | 18,398-19,166 kg (40,560-42,252 lb), varies by screed and configuration; commonly cited base figure is 18,629 kg (41,070 lb) |
Dimensions
| Transport length | 6.65 m (21 ft 10 in) |
| Transport width | 2.44 m (8 ft 0 in) |
| Transport height | 2.97 m (9 ft 9 in) |
| Paving width | 2.4-6.25 m (8-20.5 ft), depends on screed and extension configuration |
Performance
| Travel speed | 14.5 km/h (9 mph) |
Service capacities (summary)
| Engine oil | 14.8 L (3.91 US gal) |
| Fuel tank | Not documented for this exact model in public sources - verify with your dealer |
| Hydraulic system | Not documented for this exact model in public sources - verify with your dealer |
| Cooling system | Not documented for this exact model in public sources - verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
AP-655C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat 3056 diesel | approx. 14.8 L (3.9 US gal) - not confirmed to exact configuration, verify against the data plate/OMM for the specific serial range | Cat DEO (Diesel Engine Oil), multigrade viscosity selected by ambient temperature per the standard Cat universal viscosity chart for this engine family |
| Cooling system | not reliably documented in available sources for this machine - verify with dealer or OMM coolant-system chart | Cat ELC (Extended Life Coolant); Cat DEAC is the conventional-coolant alternative but needs regular SCA conditioning |
| Fuel tank | not reliably documented in available sources for this machine - published figures for this exact model conflict/are implausible, verify with dealer or OMM | No. 2-D diesel fuel per standard Cat engine fuel spec for this era of 3056-powered equipment |
| Hydraulic system (incl. tank) - hydrostatic propulsion, screed, and conveyor/auger drive circuits | approx. 151.5 L (40 US gal) per a single source, treat as approximate pending OMM cross-check | Cat HYDO Advanced 10 hydraulic oil |
| Gearbox (screed/conveyor drive final reduction) | approx. 0.6 L per compartment, small final-reduction gearbox - not the main propulsion drive | Cat GO (Gear Oil) 85W-140 |
| Grease (spec only, all grease fittings) | not applicable - lubricated per point at scheduled intervals | Cat MPGM (Multipurpose Grease), NLGI 2, EP-fortified |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar AP-655C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the AP-655C beyond the schedule
Predictive Maintenance & Fluid Analysis
Track the 3056E's health with scheduled oil sampling on engine, hydraulic, and final-drive oil at every 250-hour service; rising iron or copper readings flag turbocharger bearing wear or propel pump degradation before failure. Monitor hydraulic oil temperature during long paving runs — sustained overheating points to a marginal cooler or contaminated fluid. Log Mobil-Trac belt tension and roller temperatures weekly; uneven heat across the undercarriage often precedes bearing or drive sprocket failure well before visible wear shows up.
Corrective & Common Repairs
Expect screed plate and auger flight replacement every one to two paving seasons on abrasive mixes; thin floor plates warp and let mix bleed under the tunnel. Conveyor chains stretch and sag, causing erratic feed to the augers — retension or replace bars before they drag on the tunnel floor. Feeder bearing seals fail from mix contamination if twice-daily greasing lapses. On the 3056E, boost leaks at turbo clamps and worn injectors are the most common power-loss complaints on this engine family.
Overhaul & Rebuild Points
Major rebuild points on the AP-655C center on the Mobil-Trac undercarriage and propulsion system: drive sprockets, idlers, and rollers wear steadily under abrasive paving conditions and usually need attention before the rubber belts themselves do. Propel pumps and motors warrant internal inspection once hydraulic oil analysis shows rising wear-metal trends. On the engine side, turbocharger and injection pump reconditioning is the typical mid-life overhaul for the 3056E. Screed vibrator and tamper bearings wear from constant cyclic loading and need periodic rebuild.
Seasonal & Environment Servicing
Cold-weather starts on the 3056E benefit from block heater use and correct-viscosity engine oil; verify starting-aid function before winter shutdown storage. Drain and inspect fuel/water separators more often through humid or seasonal-change conditions to prevent injector contamination. Diesel-heated AS2251 screeds need burner and heat-exchanger cleaning before each paving season; electric AS3251C screeds need heater element and wiring checks instead. Wash accumulated asphalt off the Mobil-Trac belts and tunnel before extended layup to prevent corrosion and cracking.
AP-655C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 067-6897 | Element Kit, Fuel Filter | Fuel system service | Check fitment → |
| 119-0073 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 132-7165 | Filter Element As-Air | Air intake service | Check fitment → |
| 054-1719 | Filter Element As-Oil | Hydraulic service | Check fitment → |
| 077-6325 | Kit-Seal | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
AP-655C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 0100 FMI 01 | Engine oil pressure below normal operating range | Low oil level, worn oil pump, plugged suction screen, or oil dilution/wrong viscosity | Stop engine, check oil level and condition, verify actual pressure with a mechanical gauge before returning to service |
| CID 0100 FMI 03 | Oil pressure sensor circuit voltage above normal | Sensor signal wire shorted to a power source, corroded connector, or failed sensor | Inspect sensor wiring and connector for damage or corrosion, test sensor supply and signal voltage, replace sensor if wiring checks out |
| CID 0110 FMI 00 | Engine coolant temperature above normal operating range | Low coolant, blocked radiator/screen, slipping or failed fan drive, faulty thermostat | Shut down and let engine cool, check coolant level and radiator airflow, inspect fan drive and thermostat before restarting |
| CID 0110 FMI 04 | Coolant temperature sensor circuit voltage below normal | Signal wire shorted to ground, damaged connector, or failed sensor | Check sensor harness for chafing or shorts to ground, verify connector pins, replace sensor if circuit tests good |
| CID 0111 FMI 01 | Engine coolant level below normal | Coolant leak, low system fill, or air trapped in cooling system | Inspect for external/internal leaks, top off with correct coolant, bleed system and recheck level after warm-up |
| CID 0168 FMI 02 | Battery/system voltage erratic or out of expected range | Loose or corroded battery terminals, worn alternator brushes/regulator, intermittent charging circuit connection | Check battery terminals and ground straps, load-test battery, verify alternator output and charging circuit wiring |
| CID 0190 FMI 08 | Engine speed/timing signal abnormal or erratic | Damaged speed/timing sensor, excessive air gap, or debris on the sensing tip | Inspect sensor mounting and air gap, clean sensor tip of metal debris, check harness continuity before replacing sensor |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
AP-655C attachments & work tools
Extendable screeds
The AP-655C pairs with Extend-A-Mat style screeds in roughly the 2.4-4.7 m (8 ft to 14 ft 9 in / 15 ft 5 in) working-width class, offered as a hydraulic diesel-heated unit or a separate electric-heated unit. Front-mount extenders, rear-mount extenders, or a tamper-bar screed arrangement are available depending on target mat texture and density.
Screed heat system
Screed heat is diesel-fired on one screed option and full electric on the other, matched to which screed unit is fitted; heat, tamper, and vibratory speed are adjustable from the paver's operator display. Onboard heating-generator output varies by screed and series, so confirm against the fitted screed's own dataplate rather than assuming one figure.
Hopper and material feed
Hopper wings and the front apron fold hydraulically and can be actuated independently left and right or together, with a separate hydraulic cylinder driving each hopper wing for even material flow. Left and right augers and conveyors run independently of each other, and mix height ahead of the screed is adjustable from the tractor display.
Grade and slope control
Grade references documented for this paver class include rigid ski beams in roughly 9.15 m and 12.2 m (30 ft and 40 ft) lengths plus sonic averaging beam sensors. Sensor arms and mounting brackets bolt directly to the tractor frame as a kit; this hardware is shared across the Cat track-paver line rather than being unique to one screed.
Screed mounting and extension coupling
Screeds couple to the tractor through the paver's standard pull-arm/tow-point arrangement typical of this size class, not a quick-attach coupler. Width extensions bolt directly onto the base screed in fixed increments, with proportional powered extenders on the higher-spec screed options for smooth width changes on the move.
Operator station and canopy
Dual operator stations transfer control with one button press and carry settings to either side of the platform for visibility to trucks approaching from either side. A canvas operator umbrella/canopy, roughly 137 x 137 cm, mounts via a universal bracket for sun and rain cover and is listed as compatible with this model.
Engine and power arrangement
Documented AP-655C units run the Cat 3056 / 3056E diesel, with rated output reported anywhere from about 158 to 174 hp depending on source and duty rating. This is a distinct, earlier engine family from the current bare-name AP655 (C4.4) and AP655F (C7.1) pavers, so performance and parts data should not be cross-mixed between those later generations and the C-series.
Truck hitch and push rollers
Truck hitch and push-roller provisions are common factory-offered options across this paver size class for engaging and gently pushing haul trucks during paving. Model-specific confirmation tied to the AP-655C dataplate was not found in available documentation, so verify exact availability for a given serial range with your dealer.
All AP-655C assemblies by section
Every catalogued assembly group for the Caterpillar AP-655C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
244-6976 Air Cleaner Gp
| 12***37 | Clip-Loop | 1 |
| 14***67 | Clamp; (Hose) | 1 |
| 17***93 | Tube As | 1 |
310-9669 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
183-8087 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
236-1042 Elbow Gp-Air Inlet
| 21***95 | Connector | 1 |
| 21***96 | Gasket | 1 |
| 23***42 | Elbow Group-Air Inlet | 1 |
244-6591 Exhaust Gp
| 13***03 | Clamp-Muffler | 2 |
| 14***97 | Gasket | 1 |
| 19***40 | Adapter | 1 |
237-2264 Turbocharger Gp
| 03***48 | Fitting-Brass | 1 |
| 10***53 | Stud | 6 |
| 10***66 | Gasket | 1 |
219-1853 Turbocharger Gp
| 03***48 | Fitting-Brass | 1 |
| 10***66 | Gasket | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
Basic Engine
216-8620 Camshaft Gp
| 15***56 | Camshaft | 1 |
| 21***20 | Camshaft Group | 1 |
221-6858 Cover Gp-Accessory Drive
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 21***03 | Washer; (Sealing) | 1 |
228-7371 Cover Gp-Valve Mechanism
| 10***04 | Gasket | 1 |
| 11***05 | Seal-O-Ring | 1 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
219-1805 Cover Gp-Valve Mechanism
| 10***04 | Gasket | 1 |
| 11***05 | Seal-O-Ring | 1 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
216-8316 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 0 |
216-8231 Cylinder Block Gp
| 20***18 | Housing As | 1 |
| 20***19 | Bolt; (M8x1.25x16-mm) | 10 |
| 21***31 | Cylinder Block Group | 1 |
216-8235 Cylinder Block Gp
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 14 |
| 06***05 | Plug | 1 |
216-8343 Cylinder Head Gp
| 16***20 | Pin | 2 |
| 21***35 | Cylinder Head Group | 1 |
| 21***43 | Cylinder Head Group | 1 |
216-8335 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 3 |
| 13***50 | Valve-Exhaust | 6 |
| 13***60 | Cap | 12 |
245-0525 Drive Gp-Pump
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 07***13 | Sleeve | 1 |
| 08***90 | Gear | 3 |
245-0527 Drive Gp-Pump
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 8 |
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 15***72 | Plug As | 1 |
146-0180 Fastener Gp-Cylinder Head
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
| 14***80 | Fastener Group-Cylinder Head | 1 |
228-7418 Fastener Gp-Cylinder Head
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
| 22***18 | Fastener Group-Cylinder Head | 1 |
233-8537 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 8 |
| 10***31 | Flywheel As | 1 |
217-1499 Gear Gp-Front
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 21***48 | Gear As-Idler; (31-Teeth) | 1 |
202-6749 Guard Gp-Belt
| 20***49 | Guard Group-Belt | 1 |
| 20***76 | Bracket As | 1 |
| 20***77 | Bracket | 1 |
234-2651 Housing Gp-Flywheel
| 10***17 | Plug | 3 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
221-6835 Housing Gp-Front
| 06***78 | Washer | 1 |
| 06***79 | Dowel | 1 |
| 06***97 | Element Kit, Fuel Filter | 1 |
221-6875 Lifting Gp-Engine
| 22***72 | Plate | 2 |
| 22***75 | Lifting Group-Engine | 1 |
| 6I***54 | Bolt; (M10x1.5x25-mm) | 4 |
235-6343 Mounting Gp-Alternator
| 23***43 | Mounting Group-Alternator | 1 |
| 6I***54 | Bolt; (M8x1.25x30-mm) | 2 |
| 6I***39 | Bolt; (M8x1.25x70-mm) | 1 |
164-8503 Mounting Gp-Engine
| 16***03 | Mounting Group-Engine | 1 |
| 19***35 | Plate As | 1 |
| 19***36 | Plate As | 1 |
273-5559 Mounting Gp-Engine
| 17***77 | Seal-O-Ring | 1 |
| 25***73 | Plug As; (6 Cyl Front Mtg) | 1 |
| 25***74 | Plug As | 6 |
170-3711 Mounting Gp-Fan Drive
| 17***11 | Mounting Group-Fan Drive | 1 |
| 6I***50 | Bolt; (M10x1.5x65-mm) | 4 |
240-6019 Pan Gp-Oil -Engine
| 11***27 | Tube As | 1 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 1 |
| 11***30 | Clip | 1 |
219-1065 Pan Gp-Oil
| 11***26 | Pan As-Oil | 1 |
| 11***27 | Tube As | 1 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 1 |
216-8324 Piston & Rod Gp
| 06***83 | Bolt-Rod Cap | 2 |
| 12***36 | Ring-Retaining | 2 |
| 13***48 | Bushing | 1 |
239-1349 Plug Gp-Cylinder Block -Oil Gallery
| 06***24 | Plug | 2 |
| 23***49 | Plug Group-Cylinder Block; -Oil Gallery | 1 |
236-6604 Plug Gp-Cylinder Block
| 03***63 | Plug | 2 |
| 23***04 | Plug Group-Cylinder Block | 1 |
233-2765 Plug Gp-Engine -Timing Case
| 23***65 | Plug Group-Engine; -Timing Case | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 1 |
233-2684 Pulley Gp-Crankshaft
| 10***41 | Bolt; (M12x1.75x25-mm) | 8 |
| 10***54 | Pulley | 1 |
| 23***84 | Pulley Group-Crankshaft | 1 |
147-5488 Pulley Gp-Crankshaft
| 10***41 | Bolt; (M12x1.75x25-mm) | 8 |
| 10***54 | Pulley | 1 |
| 14***88 | Pulley Group-Crankshaft | 1 |
146-8956 Rocker Arm Gp
| 00***06 | Ring-Retaining | 2 |
| 06***83 | Plug-Shaft End | 2 |
| 06***87 | Spring-Shaft | 4 |
216-8619 Valve Mechanism Gp
| 06***95 | Rod | 12 |
| 13***53 | Tappet | 12 |
| 14***56 | Rocker Arm Group | 1 |
Braking System
194-2567 Pump & Valve Gp-Brake -Manual Release
| 19***67 | Pump & Valve Group-Brake; -Manual Release | 1 |
| 23***43 | Knob | 1 |
| 31***34 | Kit-Seal; (Check Valve) | 1 |
193-8539 Pump & Valve Gp-Brake -Manual Release
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
| 14***24 | Tee As | 1 |
229-9476 Pump Gp-Hand -Manual Brake Release
| 12***54 | Screw-Flat Head; (M12x1.75x35-mm) | 10 |
| 16***89 | Bolt-Hex Head; (M16x2x55mm) | 4 |
| 19***21 | Conveyor Group-Auger | 1 |
Controls
102-2703 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 1 |
| 10***47 | Gear-Worm | 1 |
| 10***50 | Guide-Bushing | 1 |
8i-0257 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 2 |
| 10***04 | Bolt-Shoulder | 2 |
| 10***24 | Tube As; (Vertical) | 4 |
197-9844 Chain Gp-Screed
| 10***87 | Link-Connecting | 1 |
| 19***33 | Link-Offset | 1 |
| 19***44 | Chain Group-Screed | 1 |
120-5898 Crown Gp-Manual
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 05***09 | Bolt-Socket Head | 4 |
| 10***87 | Link-Connecting | 1 |
276-4590 Crown Gp-Power
| 10***01 | .. Roller, Bearing | 2 |
| 10***38 | Pointer | 1 |
| 10***39 | Key-Square | 1 |
102-2699 Jack Gp-Sloper
| 10***99 | Jack Group-Sloper | 1 |
| 10***46 | Gear-Worm | 1 |
| 10***49 | Guide-Bushing | 1 |
277-2004 Motor Gp-Power Adjuster
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
282-7961 Shaft Gp-Drive -Non-Actuated
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 28***61 | Shaft Group-Drive; -Non-Actuated | 1 |
8i-0213 Sloper Gp-Manual
| 06***93 | Lockwasher-Bearing | 2 |
| 10***99 | Jack Group-Sloper | 2 |
| 10***00 | . Axle, Rod End | 2 |
Cooling System
228-7387 Connection Gp-Water
| 14***15 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
| 14***88 | Seal; (Housing, Regulator)(Temperature Regulator Housing) | 1 |
| 16***36 | Ring; (Water Temperature Regulator) | 1 |
235-6342 Cooler Gp-Fltr Base & Eng Oil
| 12***15 | Head As-0il Filter; (Engine) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 14 |
| 14***83 | Bolt; (M10x1.5x45-mm)(Starter Motor) | 1 |
221-5369 Pump Gp-Water
| 10***71 | Bolt | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 3 |
| 14***05 | Cover | 1 |
164-8502 Radiator & Hyd Oil Cooler Gp
222-2617 Radiator & Hyd Oil Cooler Gp
| 03***19 | Cap As-Radiator | 1 |
| 22***17 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 23***76 | Radiator As | 1 |
Electrical And Starting System
3e-6328 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
114-2401 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 4 |
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
194-0876 Alternator Gp-Charging
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 11***01 | Alternator Group-Charging | 1 |
| 11***37 | Pulley-Idler; (1-Groove) | 1 |
243-2390 Battery & Wiring Gp
| 10***05 | Plate | 5 |
| 10***49 | Plate | 18 |
| 11***84 | Ring-Terminal; (2-Ga, 1/4-In Screw) | 1 |
9w-0742 Block Gp-Junction -Battery
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
| 8C***58 | Block Group-Junction; (Battery) | 1 |
122-9303 Buffer Gp-Sensor -Material Height-Propel Lever-Speed Dial
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
122-9309 Buffer Gp-Sensor -5000-Hz Pwm-Conveyor Speed
| 12***09 | Buffer Group-Sensor; -5000-Hz Pwm-Conveyor Speed | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
189-0077 Control Gp-Unprogrammed
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 18***77 | Control Group-Unprogrammed; -Tractor Xmsn Control | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
244-1093 Electrical Ar
| 19***81 | Wiring Group-Machine; -Lh | 1 |
| 19***82 | Wiring Group-Machine; -Rh | 1 |
| 19***87 | Wiring Group-Console; -Operator | 1 |
241-1880 Electronics Gp-Machine
| 24***80 | Electronics Group-Machine | 1 |
| 24***36 | Service Group-Machine | 1 |
| 25***71 | Software Group-Machine | 1 |
260-9621 Electronics Gp-Machine
| 26***21 | Electronics Group-Machine | 1 |
| 35***63 | Software Group-Machine | 1 |
| 35***64 | Service Group-Machine | 1 |
260-9620 Electronics Gp-Monitor
| 26***20 | Electronics Group-Monitor | 1 |
| 28***39 | Software Group-Monitor | 1 |
| 28***40 | Service Group-Monitor | 1 |
241-1879 Electronics Gp-Monitor
| 22***70 | Software Group-Monitor; (Caterpillar Monitoring System) | 1 |
| 22***71 | Service Group-Monitor; (Caterpillar Monitoring System) | 1 |
| 24***79 | Electronics Group-Monitor | 1 |
241-5824 Generator & Mtg Gp-Hydraulic
| 11***33 | Washer; (11x50x6-mm Thk) | 4 |
| 12***67 | Clamp-Hose | 2 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
242-9959 Generator Ar
| 24***24 | Generator & Mtg Group-Hydraulic | 1 |
| 24***13 | Motor & Mtg Group-Generator | 1 |
| 24***21 | Pump & Mtg Group-Generator; -Generator | 1 |
231-1332 Generator Gp
| 23***32 | Generator Group | 1 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
338-1132 Lamp Gp-Warning Beacon -Amber, Strobe
| 20***38 | Bracket | 2 |
| 33***32 | Lamp Group-Warning Beacon; -Amber, Strobe | 1 |
| 5D***35 | Grommet | 4 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
198-8283 Lighting Gp-Flood
| 03***14 | Screw; (10-32x1-In) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
198-8284 Lighting Gp-Warning Beacon
| 09***47 | Brush As | 1 |
| 11***94 | Bell; (Rear) | 1 |
| 11***61 | Bearing | 2 |
170-7071 Motor Gp-Electric -Fuel Transfer Pump
| 17***71 | Motor Group-Electric; -Fuel Transfer Pump | 1 |
| 28***75 | Collar | 4 |
| 28***79 | Washer; (32.5x63.5x7.1-mm Thk) | 2 |
258-6918 Mounting Gp-Sensor -Sonic Sensor
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 28 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***13 | Receptacle As-Connector; (70-Pin) | 4 |
254-5042 Panel Gp-Circuit Breaker
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 28 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***13 | Receptacle As-Connector; (70-Pin) | 4 |
246-5399 Panel Gp-Circuit Breaker
| 11***05 | Film-Identification; (Service Meter) | 1 |
| 11***18 | Clip | 1 |
| 11***29 | Washer; (6.6x22x2-mm Thk) | 4 |
262-9205 Panel Gp-Circuit Breaker
| 19***06 | Strip-Terminal | 1 |
| 19***80 | Circuit Breaker As; (20-Ampere)(240-Volt Receptacle) | 2 |
| 19***75 | Receptacle | 2 |
306-7612 Panel Gp-Power
| 11***24 | Clamp | 2 |
| 16***41 | Support-Sensor | 2 |
| 1G***11 | Shaft-Governor Control | 2 |
232-6362 Panel Gp-Power -Generator
| 19***06 | Strip-Terminal | 1 |
| 19***80 | Circuit Breaker As; (20-Ampere)(240-Volt Receptacle) | 1 |
| 19***75 | Receptacle | 2 |
198-8279 Sensor Gp-Auger
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 19***79 | Sensor Group-Auger | 1 |
145-8519 Sensor Gp-Auger
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 11***07 | Knob | 2 |
| 12***44 | Paddle As | 2 |
160-2443 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
284-8876 Sensor Gp-Position
| 24***63 | Lockwasher | 1 |
| 25***60 | Heater As; (Air Inlet) | 1 |
| 28***76 | Sensor Group-Position | 1 |
195-8090 Sensor Gp-Position -Steering
| 12***50 | Receptacle As | 1 |
| 12***51 | Bushing | 1 |
| 12***52 | Clamp As-Cable | 1 |
219-2385 Sensor Gp-Position
| 21***85 | Sensor Group-Position; -Auger | 1 |
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
228-7461 Starting Aid Gp -Heater
| 03***55 | Valve As-Check; (Starting Aid Heater Lines) | 1 |
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
235-6362 Starting Aid Gp -Lines
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 3 |
| 16***04 | Spacer | 1 |
| 16***99 | Starting Motor Group-Electric | 1 |
168-3499 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
159-5029 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
207-1516 Starting Motor Gp-Electric
| 20***16 | Starting Motor Group-Electric | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
7n-0718 Switch Gp-Disconnect -Battery
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
172-8660 Switch Gp-Liquid Level -Hydraulic Tank
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
241-8368 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
254-3783 Switch Gp-Magnetic
| 19***70 | Harness As; (Auxiliary Steering) | 1 |
| 25***83 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 6 |
167-0138 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
260-9624 Wiring Gp-Console
| 10***05 | Cap-Receptacle | 2 |
| 11***35 | Electronic Control Group | 2 |
| 11***18 | Clip | 14 |
246-5397 Wiring Gp-Console -Center
| 10***03 | Plate-Cover | 1 |
| 10***49 | Plate | 1 |
| 11***18 | Clip | 1 |
192-5087 Wiring Gp-Console -Operator
| 10***03 | Plate-Cover | 1 |
| 10***49 | Plate | 1 |
| 11***18 | Clip | 1 |
191-2846 Wiring Gp-Console -Auxiliary Steering
| 10***05 | Cap-Receptacle | 2 |
| 11***35 | Electronic Control Group | 2 |
| 11***18 | Clip | 14 |
262-9213 Wiring Gp-Console -Operator
| 10***58 | Bolt; (M8x1.25x14-mm) | 3 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
| 14***83 | Bolt; (M10x1.5x45-mm)(Starter Motor) | 1 |
219-2462 Wiring Gp-Electronic Control
| 10***13 | Receptacle As-Connector; (70-Pin) | 1 |
| 11***18 | Clip | 3 |
| 13***40 | Resistor As-Connection; (3-Pin) | 1 |
246-7025 Wiring Gp-Hydraulic Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 2 |
| 11***01 | Plate-Face | 1 |
192-5082 Wiring Gp-Machine -Rh
| 19***82 | Wiring Group-Machine; -Rh | 1 |
| 19***81 | Circuit Breaker As; (35-Ampere)(Generator) | 1 |
| 23***62 | Panel Group-Power; -Generator | 1 |
192-5081 Wiring Gp-Machine -Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 2 |
| 11***01 | Plate-Face | 1 |
244-0433 Wiring Gp-Panel -Power
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 11***84 | Ring-Terminal; (2-Ga, 1/4-In Screw) | 1 |
| 11***18 | Clip | 12 |
246-5394 Wiring Gp-Power Train
| 19***98 | Panel Group-Electronic; -Material Height-Rh | 1 |
| 19***99 | Panel Group-Electronic; -Material Height-Lh | 1 |
| 24***45 | Harness As-Screed; (Paver To Screed) | 1 |
244-4975 Wiring Gp-Screed -Electric Heat
| 24***75 | Wiring Group-Screed; -Electric Heat | 1 |
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 4 |
| 30***44 | Harness As-Screed; (Electric Heat) | 1 |
245-6349 Wiring Gp-Screed -Electric Heat
| 20***72 | Film-Warning; (Accumulator) | 1 |
| 24***49 | Wiring Group-Screed; -Electric Heat | 1 |
Electrical System
196-1299 Panel Gp-Electronic -Material Height-Lh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 13***48 | Potentiometer As; (Rh Conveyor Speed Dial) | 1 |
196-1298 Panel Gp-Electronic -Material Height-Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***83 | Relay-Time Delay; (Electric Heat) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
Engine Arrangement
304-7037 Engine Ar
| 30***65 | Engine Ar-Primary | 1 |
| 30***37 | Engine Ar | 1 |
304-6802 Engine Ar
| 29***52 | Engine Ar-Primary | 1 |
| 30***02 | Engine Ar | 1 |
164-8499 Engine Ar
| 14***05 | Adapter Group | 1 |
| 15***23 | Valve-Sampling; (Engine Coolant) | 1 |
| 15***29 | Starting Motor Group-Electric | 1 |
304-6803 Engine Ar
| 14***05 | Adapter Group | 1 |
| 15***23 | Valve-Sampling; (Engine Coolant) | 1 |
| 15***70 | Cap-Dust; (Engine Coolant) | 1 |
304-5465 Engine Ar-Primary
| 17***11 | Mounting Group-Fan Drive | 1 |
| 21***31 | Cylinder Block Group | 1 |
| 21***16 | Crankshaft Group | 1 |
176-3155 Engine Ar-Primary
| 14***80 | Fastener Group-Cylinder Head | 1 |
| 14***88 | Pulley Group-Crankshaft | 1 |
| 17***11 | Mounting Group-Fan Drive | 1 |
297-4052 Engine Ar-Primary
| 17***11 | Mounting Group-Fan Drive | 1 |
| 21***31 | Cylinder Block Group | 1 |
| 21***16 | Crankshaft Group | 1 |
244-1092 Installation Ar-Engine
| 16***99 | Engine Ar | 1 |
| 16***02 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 16***03 | Mounting Group-Engine | 1 |
304-6798 Installation Ar-Engine
| 16***02 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 16***03 | Mounting Group-Engine | 1 |
| 24***91 | Exhaust Group | 1 |
Feeder Drag And Auger Conveyors
191-4422 Auger Gp
| 01***41 | Setscrew-Socket | 3 |
| 19***22 | Auger Group | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
201-5584 Bearing Gp-Auger
| 20***84 | Bearing Group-Auger | 1 |
| 8I***14 | Bar-Side | 58 |
| 8I***15 | Bar-Side | 29 |
106-9718 Bearing Gp-Auger
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 2 |
| 11***47 | Tube As | 1 |
116-9509 Bearing Gp-Auger
| 11***94 | Bearing-Insert | 1 |
| 11***09 | Bearing Group-Auger | 1 |
| 20***83 | Cap | 2 |
105-9278 Chain Gp-Conveyor -Rh
| 10***78 | Chain Group-Conveyor; -Rh | 2 |
| 13***56 | Chain Group-Conveyor; -Lh | 1 |
134-3956 Chain Gp-Conveyor -Lh
| 13***56 | Chain Group-Conveyor; -Lh | 1 |
| 28***79 | Bar-Side | 232 |
| 28***80 | Foam Insulation; 40 X 60 X 644 mm, Bar-Side | 116 |
280-9921 Chain Gp-Conveyor
| 19***22 | Auger Group | 1 |
| 19***45 | Guard Group-Conveyor | 1 |
| 19***48 | Conveyor Group-Drag | 2 |
107-5892 Chain Gp-Conveyor
| 10***92 | Chain Group-Conveyor | 1 |
| 8I***14 | Bar-Side | 58 |
| 8I***15 | Bar-Side | 29 |
184-0919 Conveyor Ar-Drag & Auger
| 10***85 | Plate | 2 |
| 10***91 | Pipe | 2 |
| 10***96 | Plate | 1 |
191-4421 Conveyor Gp-Auger
| 05***20 | Pin-Spring | 58 |
| 10***92 | Chain Group-Conveyor | 1 |
| 12***46 | Bar-Feeder | 29 |
192-5448 Conveyor Gp-Drag
| 10***56 | Rod; (Prop) | 1 |
| 11***77 | Bumper-Rubber | 5 |
| 13***10 | Spring-Gas | 2 |
255-2733 Door Gp-Access
| 10***99 | Sprocket As; (12-Teeth) | 2 |
| 13***92 | Key-Square | 2 |
| 19***62 | Planetary Group-Conveyor | 2 |
192-9376 Drive Gp-Conveyor
| 19***76 | Drive Group-Conveyor | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
198-8287 Extension Gp-Auger -12-In, Rh
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
231-3532 Extension Gp-Auger -6-In
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
199-4206 Extension Gp-Auger -12-In, Lh
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
231-2043 Extension Gp-Auger -24-In, Lh
| 23***43 | Extension Group-Auger; -24-In, Lh | 1 |
| 31***84 | Tube | 2 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 2 |
231-2042 Extension Gp-Auger -24-In, Rh
| 23***42 | Extension Group-Auger; -24-In, Rh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
215-1870 Footshaft Gp
| 12***54 | Screw-Flat Head; (M12x1.75x35-mm) | 64 |
| 19***32 | Guard As | 4 |
| 19***33 | Guard As | 4 |
192-5445 Guard Gp-Conveyor
| 19***53 | Pump & Mtg Group-Conveyor; -Material Feed | 1 |
| 19***58 | Motor & Mtg Group-Conveyor | 1 |
| 19***59 | Motor & Mtg Group-Auger | 1 |
191-0012 Hydraulic Ar-Conveyor -Material Feed
| 13***63 | Bearing | 2 |
| 19***12 | Hydraulic Ar-Conveyor; -Material Feed | 1 |
| 24***25 | Kit-Shim; (Axle Bearing) | 1 |
244-3759 Kit-Housing
| 11***34 | Connector | 1 |
| 14***72 | Elbow Group | 4 |
| 14***30 | Tee As | 4 |
190-9958 Motor & Mtg Gp-Conveyor
| 09***92 | Pin-Spring | 2 |
| 13***16 | Kit-Washer; (Planetary) | 1 |
| 13***30 | Plug-Magnetic; (Planetary) | 1 |
191-4411 Planetary Gp-Auger
| 09***92 | Pin-Spring | 2 |
| 13***63 | Bearing | 1 |
| 16***54 | Seal | 1 |
192-7962 Planetary Gp-Conveyor
| 14***22 | Adapter; (-10orb/-12orfs) | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***55 | Elbow As. | 1 |
190-9953 Pump & Mtg Gp-Conveyor -Material Feed
| 14***22 | Adapter; (-10orb/-12orfs) | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***55 | Elbow As. | 1 |
193-1077 Shaft Gp-Feeder Drive
| 10***68 | Nipple-Pipe | 2 |
| 11***99 | Pin As-Pivot | 2 |
| 19***77 | Shaft Group-Feeder Drive | 1 |
Frame And Body
253-1002 Arm Gp-Drop
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 19***19 | Roller | 4 |
| 19***20 | Shaft | 2 |
194-8190 Arm Gp-Tow
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
| 19***90 | Arm Group-Tow | 1 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 22***51 | Bracket | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
232-1107 Bracket Gp-Support
| 14***11 | Plug Group | 2 |
| 16***16 | Plug As | 1 |
| 23***07 | Bracket Group-Support | 1 |
246-2404 Cover Gp-Access -Without Generator
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 19***35 | Fender; (Lh) | 1 |
| 19***48 | Plate; (Rh) | 1 |
255-2734 Cover Gp-Paver Ventilation
| 14***60 | Plate | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
| 14***11 | Plug Group | 1 |
205-4712 Cover Gp-Platform -Without Ventilation
| 10***31 | Nut-Spring | 8 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 8 |
| 10***82 | Scale; (Rh)(Screed Ext) | 1 |
8i-0291 Deflector Gp
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
215-7553 Extension Gp-Main Frame
| 10***88 | Extension As | 1 |
| 21***53 | Extension Group-Main Frame | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
231-1982 Extension Gp-Main Frame -12-In
| 10***90 | Extension As | 1 |
| 23***82 | Extension Group-Main Frame; -12-In | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
231-2035 Extension Gp-Main Frame
| 22***95 | Plate As | 1 |
| 23***35 | Extension Group-Main Frame | 1 |
| 24***09 | Plate As | 1 |
231-1983 Extension Gp-Main Frame -24-In
| 12***20 | Shim; (1.65-mm Thk) | 4 |
| 22***49 | Bar | 2 |
| 22***50 | Bar; (Rh) | 1 |
244-8704 Frame Gp-Main
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
287-6598 Frame Gp-Screed
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***68 | Grip-Handle | 2 |
| 10***70 | Support As | 2 |
120-5906 Frame Gp-Screed
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
145-9438 Gate Gp-End
| 03***74 | Keeper | 1 |
| 10***39 | Tube As | 1 |
| 10***78 | Block | 1 |
199-4196 Guide Gp-Steering
| 11***16 | Boss; (M12x1.75x20-mm) | 1 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
| 15***74 | Bolt-Round Head; (M12x1.75x60-mm) | 25 |
190-7438 Hopper Gp
| 10***76 | Clamp-Half | 8 |
| 14***89 | Hose As | 2 |
| 14***20 | Connector As | 4 |
194-8172 Lines Gp-Grease
| 19***72 | Lines Group-Grease | 1 |
| 25***97 | Bar | 2 |
| 8T***75 | Bolt; (M16x2x90-mm) | 2 |
195-2382 Lock Gp-Transport
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 19***82 | Lock Group-Transport | 1 |
| 24***57 | Plate | 1 |
245-9078 Plate Gp-Screed -Electric Heat, 28-In
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 2 |
245-9079 Plate Gp-Screed -Electric Heat, 12-In
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 1 |
245-9080 Plate Gp-Screed -Electric Heat, 24-In
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 2 |
245-9077 Plate Gp-Screed -Electric Heat, 12-In
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 1 |
245-9763 Structural Ar
| 10***89 | Brace Group | 1 |
| 23***07 | Bracket Group-Support | 1 |
| 24***63 | Structural Ar | 1 |
231-1956 Support Gp-Frame
| 11***62 | Washer | 11 |
| 20***06 | Panel-Foam | 1 |
| 20***07 | Panel-Foam | 1 |
274-3869 Suppression Gp-Sound
| 23***53 | Ventilation Group-Paver | 1 |
| 23***58 | Lines Group-Paver Ventilation | 1 |
| 25***16 | Motor & Mtg Group-Ventilation | 1 |
257-4131 Ventilation Ar-Paver
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***57 | Plate | 1 |
239-0953 Ventilation Gp-Paver
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***59 | Cover As | 1 |
Fuel System
141-7844 Base Gp-Fuel Filter
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
164-4858 Cap Gp-Fuel Filler -Extreme Service, Lockable
| 16***58 | Cap Group-Fuel Filler; -Extreme Service, Lockable | 1 |
| 19***75 | Cover As-Filter; (Fuel Cap) | 1 |
| 9X***00 | Seal-O-Ring | 1 |
233-5034 Control Gp-Decelerator
| 09***12 | Spring | 2 |
| 11***18 | Clip | 2 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 2 |
201-7654 Cover Gp-Fuel Tank
| 20***53 | Plate | 1 |
| 20***54 | Cover Group-Fuel Tank | 1 |
| 6V***98 | Bolt; (M5x0.8x16-mm) | 5 |
235-6347 Filter Gp-Fuel
| 14***44 | Base Group-Fuel Filter | 1 |
| 23***47 | Filter Group-Fuel; -Secondary | 1 |
241-6946 Lines Gp-Fuel
| 06***51 | Clamp | 2 |
| 10***03 | Plate-Cover | 4 |
| 10***78 | Hose Assem. | 1 |
264-3553 Lines Gp-Fuel
| 06***51 | Clamp | 2 |
| 10***03 | Plate-Cover | 4 |
| 10***78 | Hose Assem. | 1 |
235-6367 Lines Gp-Fuel Filter
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 23***67 | Lines Group-Fuel Filter | 1 |
192-4302 Pump Gp-Fuel
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
| 13***76 | Strainer; (Fuel Pump) | 1 |
235-6331 Pump Gp-Fuel Injection
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 10***77 | Stud | 3 |
| 10***74 | Stud | 1 |
219-2455 Pump Gp-Fuel Transfer
| 03***49 | Plug | 1 |
| 06***68 | Nut-Fuel Line; (1/2-In) | 3 |
| 06***69 | Olive-Fuel Tube | 7 |
241-8824 Pump Gp-Fuel Transfer -Generator
| 11***72 | Filter Group-Fuel; (Fuel) | 1 |
| 11***73 | Filter Element-Fuel | 1 |
| 14***39 | Tube As-Fuel | 1 |
149-2683 Separator Gp-Water
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
241-6836 Tank Gp-Fuel
| 17***28 | Adapter | 3 |
| 24***36 | Tank Group-Fuel | 1 |
| 24***37 | Tank-Fuel | 1 |
Grade References
109-5622 Leveler Gp -40-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5627 Leveler Gp -40-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5626 Leveler Gp -Outboard
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5624 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5623 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***23 | Leveler Group; -30-Ft Grade Reference | 1 |
109-5625 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 7 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5628 Leveler Gp -30-Ft Grade Reference
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
| 17***80 | Film-Warning; (Mounting Machine) | 2 |
| 17***81 | Film-Warning; (Hopper Support) | 2 |
Hydraulic System
209-4549 Accumulator Gp-Hydraulic -Uncharged
| 20***49 | Accumulator Group-Hydraulic; -Uncharged | 1 |
| 3G***61 | Gasket | 1 |
| 4B***82 | Ball; (9.52mm) | 1 |
209-2659 Accumulator Gp-Hydraulic -Charged
| 13***64 | Cap | 1 |
| 13***65 | Screw | 1 |
| 13***66 | Seal | 1 |
111-8993 Cap & Strainer Gp-Hyd Oil Fill
| 11***93 | Cap & Strainer Group-Hydraulic Oil Fill | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 4 |
| 17***51 | Pin-Clevis | 4 |
190-9989 Cylinder & Mtg Gp-Auger
| 09***61 | Hose As | 1 |
| 10***44 | Elbow | 1 |
| 12***09 | Screw-Flat Head; (M10x1.5x20-mm) | 4 |
190-8795 Cylinder & Mtg Gp-Hopper
| 09***61 | Hose As | 1 |
| 14***20 | Connector As | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
190-8796 Cylinder & Mtg Gp-Screed Hoist -Tow Point
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 14***74 | Elbow As | 4 |
| 17***51 | Pin-Clevis | 4 |
195-2881 Cylinder & Mtg Gp-Tow Point
| 03***39 | Ring-Back-Up | 1 |
| 12***75 | Ring-Wear | 2 |
| 13***19 | Kit-Seal; (Extender Cylinder) | 1 |
194-7259 Cylinder Gp-Hydraulic
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 19***59 | Cylinder Group-Hydraulic; -Auger, Rh | 1 |
| 23***18 | Kit-Seal; (Auger Cylinder, Lh) | 1 |
216-0185 Cylinder Gp-Hydraulic -Tow Point
| 21***85 | Cylinder Group-Hydraulic; -Tow Point | 1 |
| 27***79 | Kit-Seal; (Hydraulic Cylinder) | 1 |
| 2K***71 | Locknut; (1-14-Thd) | 1 |
194-7260 Cylinder Gp-Hydraulic -Auger, Lh
| 19***60 | Cylinder Group-Hydraulic; -Auger, Lh | 1 |
| 23***82 | Kit-Seal; (Tow Point Cylinder) | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
135-0220 Cylinder Gp-Hydraulic -Hopper
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 13***20 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 23***20 | Kit-Plug; (Auger Cylinder) | 1 |
195-2884 Cylinder Gp-Hydraulic -Tow Point
| 19***84 | Cylinder Group-Hydraulic; -Tow Point | 1 |
| 23***55 | Kit-Seal; (Tow Point Cylinder) | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
135-0218 Cylinder Gp-Hydraulic -Extender
| 13***18 | Cylinder Group-Hydraulic; -Extender | 1 |
| 13***21 | Kit-Seal; (Hopper Cylinder) | 1 |
| 5E***32 | Ring | 1 |
275-0895 Cylinder Gp-Hydraulic
| 27***95 | Cylinder Group-Hydraulic; -Hopper | 1 |
268-1692 Cylinder Gp-Hydraulic -Hopper
| 26***92 | Cylinder Group-Hydraulic; -Hopper | 2 |
| 29***49 | Cylinder Group-Hydraulic; -Hopper | 1 |
292-8449 Cylinder Gp-Hydraulic -Hopper
| 14***47 | Elbow; (-12 Orb/Orfs) | 3 |
| 19***17 | Filter Group-Oil; -Hydraulic | 1 |
| 29***49 | Cylinder Group-Hydraulic; -Hopper | 1 |
197-0743 Filter & Mtg Gp-Hydraulic -Vibratory
| 14***47 | Elbow; (-12 Orb/Orfs) | 4 |
| 16***31 | Elbow As | 1 |
| 19***14 | Filter Group-Oil; -Hydraulic | 2 |
244-6975 Filter & Mtg Gp-Hydraulic -Propel
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 18***60 | Head | 1 |
196-7616 Filter & Mtg Gp-Hydraulic -Material Feed
| 14***47 | Elbow; (-12 Orb/Orfs) | 2 |
| 19***15 | Filter Group-Oil; -Hydraulic | 1 |
| 19***16 | Filter & Mtg Group-Hydraulic; -Material Feed | 1 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 17***15 | Filter Group-Oil; -Hydraulic Tank | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
196-7615 Filter Gp-Oil -Hydraulic
| 19***12 | Hydraulic Ar-Conveyor; -Material Feed | 1 |
| 19***13 | Hydraulic Ar-Vibratory | 1 |
| 19***16 | Hydraulic Ar; (Drive) | 1 |
192-0717 Filter Gp-Oil -Hydraulic
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 19***17 | Filter Group-Oil; -Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
196-7614 Filter Gp-Oil -Hydraulic
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 19***14 | Filter Group-Oil; -Hydraulic | 1 |
| 20***75 | Filter-Oil; (Advanced Efficiency) | 1 |
243-3875 Hydraulic Ar
| 19***95 | Cylinder & Mtg Group-Hopper | 1 |
| 19***96 | Cylinder & Mtg Group-Screed Hoist; -Tow Point | 1 |
| 19***54 | Pump & Mtg Group-Auxiliary | 1 |
191-0016 Hydraulic Ar -Fan Drive
| 19***62 | Valve & Mtg Group-Vibratory | 1 |
| 19***16 | Hydraulic Ar; (Drive) | 1 |
| 19***43 | Filter & Mtg Group-Hydraulic; -Vibratory | 1 |
243-3874 Hydraulic Ar-Auxiliary
| 19***55 | Pump & Mtg Group-Hydraulic Fan | 1 |
| 19***60 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 19***65 | Valve & Mtg Group-Hydraulic Fan | 1 |
191-0013 Hydraulic Ar-Vibratory
| 10***05 | Plate | 1 |
| 14***44 | Plate-Retainer | 2 |
| 15***14 | Hose Assem. | 1 |
198-6164 Lines Gp-Auxiliary Hydraulic
| 10***05 | Plate | 9 |
| 15***56 | Tee As | 2 |
| 15***21 | Hose As | 1 |
198-6163 Lines Gp-Brake & Shift
| 10***05 | Plate | 2 |
| 10***85 | Hose As | 1 |
| 11***52 | Hose As | 1 |
198-6104 Lines Gp-Conveyor -Material Feed
| 10***05 | Plate | 8 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
| 15***81 | Clamp-Half | 16 |
198-6162 Lines Gp-Cylinder -Auger Hoist
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 2 |
| 14***65 | Elbow | 2 |
112-3468 Lines Gp-Extension
| 10***05 | Plate | 4 |
| 11***68 | Lines Group-Extension | 1 |
| 11***34 | Hose Assem. | 1 |
200-3197 Lines Gp-Grade & Slope
| 10***03 | Plate-Cover | 2 |
| 14***18 | Connector As | 1 |
| 14***61 | Elbow Group | 2 |
234-4395 Lines Gp-Hitch -Truck
| 10***03 | Plate-Cover | 2 |
| 11***14 | Hose As | 1 |
| 14***18 | Connector As | 1 |
198-6161 Lines Gp-Hopper
| 14***44 | Plate-Retainer | 1 |
| 15***92 | Bolt-Stacking; (M8x1.25x61-mm) | 3 |
| 17***20 | Strap-Dual Clamp | 2 |
198-6166 Lines Gp-Hydraulic Fan
| 10***79 | Hose Assem. | 1 |
| 14***78 | Hose As | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
243-2708 Lines Gp-Hydraulic Generator
| 14***74 | Elbow As | 1 |
| 14***52 | Union As | 1 |
| 15***36 | Elbow As. | 1 |
239-0958 Lines Gp-Paver Ventilation
| 1P***82 | Flange-Half | 2 |
| 20***15 | Hose As | 1 |
| 20***70 | Hose As | 1 |
243-3592 Lines Gp-Return
| 10***23 | Hose As | 1 |
| 10***76 | Hose As | 1 |
| 14***66 | Elbow Group | 2 |
198-6159 Lines Gp-Screed -Lift And Extend
| 10***05 | Plate | 2 |
| 13***74 | Hose As | 1 |
| 14***75 | Elbow Group | 2 |
191-4902 Lines Gp-Track Tension
| 10***03 | Plate-Cover | 2 |
| 11***14 | Hose As | 1 |
| 13***18 | Tube As | 2 |
198-6171 Lines Gp-Truck Hitch -Truck
| 07***84 | Clamp | 6 |
| 08***86 | Clamp | 2 |
| 10***84 | Hose As | 2 |
198-6158 Lines Gp-Vibratory
| 14***27 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
112-3466 Lines Gp-Vibratory
| 08***99 | Hose As | 1 |
| 11***77 | Hose As | 1 |
| 11***66 | Lines Group-Vibratory | 1 |
197-7419 Manifold & Valve Gp -Return, Oil Cooler Bypass
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***63 | Elbow Group | 1 |
197-7420 Manifold Gp-Hydraulic -Auxiliary Pressure
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***34 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
243-3867 Manifold Gp-Hydraulic -Pump Return
| 11***80 | Elbow | 1 |
| 14***09 | Adapter As | 2 |
| 14***27 | Connector Group | 2 |
190-9959 Motor & Mtg Gp-Auger
| 14***27 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***72 | Elbow Group | 1 |
241-8413 Motor & Mtg Gp-Generator
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 2 |
| 15***37 | Elbow Group | 1 |
190-9960 Motor & Mtg Gp-Hydraulic Fan
| 14***28 | Connector Assem. | 1 |
| 14***81 | Elbow Group | 1 |
| 17***73 | Bolt; (M20x1.5x55-mm) | 4 |
190-6466 Motor & Mtg Gp-Propel
| 14***83 | Elbow As | 1 |
| 19***66 | Motor & Mtg Group-Propel | 1 |
| 20***92 | Elbow As; (90-Deg) | 1 |
256-2216 Motor & Mtg Gp-Ventilation
| 14***74 | Elbow As | 1 |
| 15***36 | Elbow As. | 1 |
| 25***16 | Motor & Mtg Group-Ventilation | 1 |
267-6648 Motor & Mtg Gp-Ventilation
| 06***39 | Seal-O-Ring | 1 |
| 16***21 | Kit-Bearing; (Vibratory Motor) | 1 |
| 26***48 | Motor & Mtg Group-Ventilation | 1 |
8i-0721 Motor Gp-Gerotor -Vibratory
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 07***53 | Pin; (Spring) | 2 |
| 11***34 | Bolt | 4 |
227-5104 Motor Gp-Piston -Generator
| 07***53 | Pin; (Spring) | 2 |
| 11***34 | Bolt | 4 |
| 14***16 | Tube | 1 |
190-8787 Motor Gp-Piston -Drag Conveyor
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
190-8789 Motor Gp-Piston -Auger
| 10***78 | Bearing-Roller | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
190-6479 Motor Gp-Piston -Propel
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
285-2212 Motor Gp-Piston
| 23***55 | Spring | 1 |
| 23***90 | Ring-Backup | 1 |
| 23***42 | Kit-Seal; (Auxiliary Pump, Generator Pump) | 1 |
231-7244 Piston Gp-Actuator
| 14***45 | Connector As | 1 |
| 19***90 | Pump Group-Piston; -Auxiliary | 1 |
| 23***44 | Piston Group-Actuator | 1 |
190-9954 Pump & Mtg Gp-Auxiliary
| 10***93 | Flange-Adapter | 1 |
| 14***45 | Connector As | 1 |
| 14***61 | Elbow Group | 1 |
241-8821 Pump & Mtg Gp-Generator -Generator
| 09***66 | Bolt; (M8x1.25x75-mm) | 1 |
| 14***55 | Elbow As. | 1 |
| 15***37 | Elbow Group | 1 |
190-9955 Pump & Mtg Gp-Hydraulic Fan
| 03***92 | Seal; (126.59mm Id) | 2 |
| 12***88 | Flange-Split | 6 |
| 13***96 | Elbow | 1 |
190-6461 Pump & Mtg Gp-Propel
| 19***61 | Pump & Mtg Group-Propel | 1 |
| 23***03 | Kit-Seal; (Gear Pump)(Charge, Conveyor) | 1 |
254-7016 Pump Gp-Gear -Hydraulic Fan
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 09***39 | Washer; (8.33x15x2.12-mm Thk) | 1 |
232-1533 Pump Gp-Gear -Charge, Conveyor
| 06***09 | Nut-Elastic Stop; (9/16-18-Thd) | 1 |
| 19***51 | Seal-O-Ring | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
190-6480 Pump Gp-Piston -Propel
| 03***39 | Seal-O-Ring (Id=9.25mm) | 2 |
| 11***83 | Nut-Seal | 1 |
| 19***80 | Pump Group-Piston; -Propel | 1 |
190-8790 Pump Gp-Piston -Auxiliary
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 07***53 | Pin; (Spring) | 2 |
| 11***23 | Spring | 2 |
241-8646 Pump Gp-Piston -Generator
| 23***49 | Spring | 1 |
| 23***50 | Cylinder Block | 1 |
| 23***51 | Ring | 1 |
199-5718 Pump Gp-Piston -Conveyor
| 19***18 | Pump Group-Piston; -Conveyor | 1 |
| 23***33 | Valve Group-Pump Control; -Pressure Compensator | 1 |
| 23***44 | Piston Group-Actuator | 1 |
231-7227 Rotating Gp-Pump
| 09***87 | Tee | 1 |
| 10***93 | Flange-Adapter | 1 |
| 14***13 | Adapter Group | 1 |
243-3873 Tank & Mtg Gp-Hydraulic
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***14 | Seal-O-Ring (Id=9.80mm) | 4 |
| 09***17 | Seal-O-Ring (Id=13.80mm) | 4 |
192-4622 Tank Gp-Hydraulic
| 10***65 | Bolt-Socket Head; (M8x1.25x100-mm) | 4 |
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 12***88 | Tee | 1 |
190-9963 Valve & Mtg Gp-Auxiliary
| 11***70 | Bolt | 2 |
| 14***16 | Connector Group | 1 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
241-8823 Valve & Mtg Gp-Control -Generator
| 14***51 | Elbow Group | 1 |
| 14***23 | Tee As | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
204-5351 Valve & Mtg Gp-Control -Gauge Isolator
| 11***18 | Clip | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 4 |
| 15***65 | Elbow; (Spl) | 1 |
190-9965 Valve & Mtg Gp-Hydraulic Fan
| 14***18 | Connector As | 4 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 15***80 | Coil | 2 |
190-9964 Valve & Mtg Gp-Tow Point
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Clip | 2 |
| 12***63 | Spacer; (10.3x20x25-mm Thk) | 2 |
191-5240 Valve & Mtg Gp-Track Tensioner
| 14***61 | Elbow Group | 2 |
| 14***74 | Elbow As | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
247-1386 Valve & Mtg Gp-Truck Hitch
| 16***74 | Tee Group | 2 |
| 19***03 | Valve Group-Control; -Vibratory Bypass | 1 |
| 24***86 | Valve & Mtg Group-Truck Hitch | 1 |
190-9962 Valve & Mtg Gp-Vibratory
| 19***62 | Valve & Mtg Group-Vibratory | 1 |
| 21***56 | Cartridge As-Valve | 1 |
| 21***57 | Kit-Seal | 1 |
215-3511 Valve Gp-Accumulator Charging
| 21***11 | Valve Group-Accumulator Charging | 1 |
| 22***80 | Valve Group-Control; (Vibratory Bypass) | 1 |
| 22***83 | Coil | 1 |
254-0776 Valve Gp-Control
| 07***27 | Kit-Seal; (Counterbalance Valve) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 12***16 | Solenoid As | 2 |
230-9160 Valve Gp-Control -Truck Hitch
| 23***60 | Valve Group-Control; -Truck Hitch | 1 |
| 25***77 | Kit-Seal; (Generator Control Valve) | 1 |
| 27***89 | Coil-Solenoid; (Solenoid Valve) | 1 |
228-4076 Valve Gp-Control -Auxiliary
| 22***76 | Valve Group-Control; -Auxiliary | 1 |
| 23***82 | Nut-Special | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
208-1632 Valve Gp-Control -Vibratory
| 20***32 | Valve Group-Control; -Vibratory | 1 |
| 25***76 | Valve Group-Control | 1 |
| 25***79 | Valve As-Needle | 1 |
190-8803 Valve Gp-Control -Vibratory Bypass
| 19***03 | Valve Group-Control; -Vibratory Bypass | 1 |
| 19***47 | Valve Group-Control; (Vibratory) | 1 |
| 19***41 | Cartridge As-Valve | 1 |
227-5105 Valve Gp-Control -Generator
| 22***14 | Kit-Seal; (Solenoid Valve)(Auxiliary Control Valve) | 4 |
| 22***73 | Kit-Seal; (Flow Control Valve)(Auxiliary Control Valve) | 1 |
| 22***99 | Kit-Seal; (Solenoid Valve)(Auxiliary Control Valve) | 4 |
169-0166 Valve Gp-Counterbalance -Screed
| 14***16 | Connector Group | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
195-2880 Valve Gp-Counterbalance -Tow Point
| 19***80 | Valve Group-Counterbalance; -Tow Point | 1 |
| 23***42 | Kit-Seal; (Auxiliary Pump, Generator Pump) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
194-2566 Valve Gp-Counterbalance -Screed
| 03***53 | Seal-O-Ring; (08.92mm Id) | 2 |
| 11***16 | Kit-Seal; (Counterbalance Valve) | 1 |
| 19***66 | Valve Group-Counterbalance; -Screed | 1 |
231-7233 Valve Gp-Pump Control -Pressure Compensator
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***21 | Coil | 2 |
| 13***39 | Valve-Block | 1 |
103-3602 Valve Gp-Solenoid
| 09***99 | Fitting-Grease; (Hydraulic) | 3 |
| 10***90 | Coupling | 4 |
| 10***95 | Bearing | 8 |
8i-0142 Vibratory Gp
| 13***40 | Locknut; (M8x1.25-Thd) | 8 |
| 19***11 | Cover As-Console | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 16 |
Implements
106-3483 Extension Ar -Diesel Heat, 28-In
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 2 |
| 10***83 | Extension Ar; -Diesel Heat, 28-In | 1 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
231-2205 Extension Ar -20-Ft
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
| 21***53 | Extension Group-Main Frame | 1 |
231-2202 Extension Ar -20-Ft, 2-In
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 2 |
| 11***09 | Bearing Group-Auger | 2 |
| 18***19 | Extension Group-Screed; -Diesel Heat, 12-In | 2 |
231-2203 Extension Ar -16-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 18***08 | Extension Group-Screed; -Diesel Heat, 24-In | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
106-3482 Extension Ar -Diesel Heat, 12-In
| 10***52 | Harness As-Screed; (Extension) | 1 |
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 8 |
231-2201 Extension Ar -17-Ft, 6-In
| 10***83 | Extension Ar; -Diesel Heat, 28-In | 2 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
231-2204 Extension Ar -18-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 18***08 | Extension Group-Screed; -Diesel Heat, 24-In | 2 |
| 18***19 | Extension Group-Screed; -Diesel Heat, 12-In | 2 |
235-1876 Extension Ar-Screed -14-Ft
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
247-1282 Extension Gp-Screed -17-Ft, 6-In
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
185-5419 Extension Gp-Screed -Diesel Heat, 12-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
245-9082 Extension Gp-Screed -Electric Heat With Vibration, 28-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***31 | Bar-Spacer | 1 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
245-9081 Extension Gp-Screed -Electric Heat, 12-In
| 10***95 | Bearing | 2 |
| 10***12 | Shaft As-Vibratory | 1 |
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
247-1278 Extension Gp-Screed -18-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
245-9083 Extension Gp-Screed -Electric Heat, 12-In
| 10***95 | Bearing | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
247-1279 Extension Gp-Screed -20-Ft
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
8i-0520 Extension Gp-Screed -Diesel Heat, 12-In
| 10***95 | Bearing | 2 |
| 10***12 | Shaft As-Vibratory | 1 |
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
185-5408 Extension Gp-Screed -Diesel Heat, 24-In
| 18***08 | Extension Group-Screed; -Diesel Heat, 24-In | 1 |
| 1A***68 | Nut | 4 |
| 20***59 | Plate | 1 |
247-1283 Extension Gp-Screed -20-Ft, 2-In
| 19***82 | Hitch Group-Truck; -Oscillating | 1 |
| 19***71 | Lines Group-Truck Hitch; -Truck | 1 |
| 24***83 | Extension Group-Screed; -20-Ft, 2-In | 1 |
247-1277 Extension Gp-Screed -16-Ft
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
8i-0521 Extension Gp-Screed -Diesel Heat With Vibration, 28-In
| 10***95 | Bearing | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
245-9084 Extension Gp-Screed -Electric Heat With Vibration, 24-In
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***09 | Bearing Group-Auger | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
194-2481 Hitch Ar-Truck -Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
166-7676 Hitch Gp-Truck
| 16***76 | Hitch Group-Truck; -Oscillating | 2 |
| 19***08 | Bar | 1 |
| 19***09 | Pin As | 1 |
195-3182 Hitch Gp-Truck
| 11***96 | Roller Group-Push | 1 |
| 14***11 | Plug Group | 2 |
| 19***08 | Bar | 1 |
195-3181 Roller Ar-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 10***64 | Shaft As | 2 |
| 11***95 | Roller As | 1 |
112-0896 Roller Gp-Push
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 11***96 | Roller Group-Push | 1 |
| 24***28 | Seal | 1 |
112-1276 Shaft Gp-Drive -Eccentric Weight
| 11***76 | Shaft Group-Drive; -Eccentric Weight | 1 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 19***77 | Frame As | 1 |
Lubrication System
216-9683 Filter Gp-Engine Oil
| 21***83 | Filter Group-Engine Oil | 1 |
| 7W***27 | Filter As-Engine Oil | 2 |
234-6106 Pump Gp-Engine Oil
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 13***39 | Stud | 1 |
| 18***18 | Tube As | 1 |
Machine Arrangement
244-1091 Chassis Ar
| 19***38 | Hopper Group | 1 |
| 19***72 | Lines Group-Grease | 1 |
| 19***96 | Guide Group-Steering | 1 |
242-8815 General Ar -Ap-655c
| 18***18 | Undercarriage Ar | 1 |
| 18***19 | Conveyor Ar-Drag & Auger | 1 |
| 18***21 | Operator Ar | 1 |
304-6805 General Ar
| 18***18 | Undercarriage Ar | 1 |
| 18***19 | Conveyor Ar-Drag & Auger | 1 |
| 18***21 | Operator Ar | 1 |
241-6776 Screed Ar
| 11***66 | Lines Group-Vibratory | 1 |
| 11***68 | Lines Group-Extension | 1 |
| 12***98 | Crown Group-Manual | 1 |
Operator Station
194-3729 Console Gp-Instrument -Central
| 19***29 | Console Group-Instrument; -Central | 1 |
| 25***03 | Control Group-Unprogrammed; (Caterpillar Monitoring System)(Caterpillar Monitoring System) | 1 |
160-6567 Control Gp-Unprgmed Monitor -Caterpillar Monitoring System
| 16***67 | Control Group-Unprgmed Monitor; -Caterpillar Monitoring System | 1 |
| 20***00 | Floor Mat; (Operator Station Floor) | 1 |
| 20***01 | Floor Mat | 1 |
244-8640 Floor Mat Gp
| 19***60 | Cover; (Center Console) | 1 |
| 20***50 | Cover; (Operator Console) | 2 |
| 20***78 | Plate | 1 |
200-8020 Guard Gp-Vandalism
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
132-3090 Lever Gp-Propel
| 10***60 | Plate | 1 |
| 13***90 | Lever Group-Propel | 1 |
| 13***64 | Bushing | 2 |
101-9559 Lock Gp-Rotation
| 10***59 | Lock Group-Rotate | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
166-6943 Module Gp-Quad Gauge
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 16***43 | Module Group-Quad Gauge; -Fuel Level-Engine Coolant Temperature-Hydraulic Oil Temp-Engine Oil Pressure | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
194-1926 Module Gp-Speedometer & Tach
| 19***26 | Module Group-Speedometer & Tach | 1 |
| 19***29 | Console Group-Instrument; -Central | 1 |
| 19***30 | Platform Group-Operator; -Lh | 1 |
184-0921 Operator Ar
| 08***41 | Switch As-Toggle; (Lh Feeder Auto/Manual Control) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***86 | Switch Group-Toggle; (Parking Brake Override Control) | 1 |
196-6942 Panel Gp-Instrument -Operator
| 08***12 | Lens-Clear; (Hazard Warning Lights) | 1 |
| 10***66 | Bezel | 3 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
262-9200 Panel Gp-Instrument
| 08***12 | Lens-Clear; (Hazard Warning Lights) | 1 |
| 10***66 | Bezel | 3 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
232-0741 Panel Gp-Instrument -Center Console
| 08***41 | Switch As-Toggle; (Lh Feeder Auto/Manual Control) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***86 | Switch Group-Toggle; (Parking Brake Override Control) | 1 |
262-9210 Panel Gp-Instrument
| 10***59 | Lock Group-Rotate | 1 |
| 10***04 | Plate As | 2 |
| 16***22 | Screw-Button Head; (M8x1.25x30-mm) | 2 |
245-9158 Platform Gp-Operator
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 2 |
| 23***51 | Seat Group-Suspension; -Vinyl | 2 |
245-2885 Platform Gp-Operator
| 20***22 | Platform As | 1 |
| 20***27 | Step As | 1 |
| 20***42 | Bracket As | 2 |
194-3731 Platform Gp-Operator -Rh
| 11***14 | Platform As-Top | 1 |
| 14***74 | Extension As-Platform | 2 |
| 19***31 | Platform Group-Operator; -Rh | 1 |
194-3730 Platform Gp-Operator -Lh
| 10***59 | Lock Group-Rotate | 1 |
| 16***22 | Screw-Button Head; (M8x1.25x30-mm) | 2 |
| 19***45 | Cover As-Console; (Operator) | 1 |
199-4298 Seat Gp-Suspension -Vinyl
| 19***32 | Kit-Foam Back | 1 |
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 20***36 | Kit-Damper | 1 |
235-3151 Seat Gp-Suspension -Vinyl
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 08***11 | Ring | 2 |
| 10***12 | Bracket As-Motor | 1 |
198-9009 Steering Column Gp
| 19***09 | Steering Column Group | 1 |
187-6649 Umbrella Gp
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
| 17***11 | Bolt; (M20x1.5x70-mm)(M20x1.5) | 40 |
Power Train
190-6473 Drive Gp-Final
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
| 18***43 | Shield | 2 |
250-3377 Hydraulic Ar-Propel
| 13***72 | Cover | 2 |
| 13***56 | Hose As | 1 |
| 14***38 | Elbow | 1 |
250-3376 Lines Gp-Propel
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 13***67 | Piston-Brake | 1 |
| 15***84 | Cone | 2 |
272-7288 Planetary Gp-Final Drive -2-Speed
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 13***67 | Piston-Brake | 1 |
| 15***84 | Cone | 2 |
219-1962 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 13***67 | Piston-Brake | 1 |
| 15***84 | Cone | 2 |
321-9807 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 13***67 | Piston-Brake | 1 |
| 15***84 | Cone | 2 |
325-4689 Planetary Gp-Final Drive
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
| 22***76 | Pump Group-Hand; -Manual Brake Release | 1 |
256-9597 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 13***67 | Piston-Brake | 1 |
| 15***84 | Cone | 2 |
Service Equipment And Supplies
263-7728 Film Gp
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
| 08***52 | Decal-Caution, Hopper Support | 2 |
| 20***09 | Film; (Circuit Panel) | 1 |
263-7729 Film Gp
| 08***77 | Adapter | 1 |
| 1G***70 | Extension-Curve | 1 |
| 1G***79 | Hose As | 1 |
7r-4741 Lines Gp-Spray Down
| 12***13 | Film-Instruction; (Hydraulic Oil Level) | 1 |
| 12***82 | Film-Information; (Height Scale)(Screed) | 2 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 2 |
246-2988 Plate & Film Gp
| 24***88 | Plate & Film Group | 2 |
254-0057 Plate & Film Gp
| 08***54 | Film-Notice; (Screed Retract) | 2 |
| 10***08 | Film; (Screed Adjustment)(Extender Screed) | 1 |
| 10***14 | Handle | 1 |
247-4205 Plate & Film Gp -Ap-655c
| 08***54 | Film-Notice; (Screed Retract) | 2 |
| 10***08 | Film; (Screed Adjustment)(Extender Screed) | 1 |
| 10***14 | Handle | 1 |
201-7598 Pump & Motor Gp-Washdown -Fuel Transfer
| 17***28 | Fitting-Swivel | 1 |
| 17***29 | Seal-V-Ring | 1 |
| 19***04 | Kit-Repair; (Washdown Hose Reel Lock) | 1 |
087-0889 Reel Gp-Washdown Hose
| 08***89 | Reel Group-Washdown Hose | 2 |
| 10***96 | Hose As | 1 |
| 12***78 | Valve As-Shutoff | 1 |
198-8278 Washdown Gp -With Reel
| 10***96 | Hose As | 1 |
| 11***99 | Nipple-Pipe | 1 |
| 12***78 | Valve As-Shutoff | 1 |
Slope And Grade Control
194-9421 Beam Gp-Transverse
| 10***63 | Clamp | 1 |
| 11***95 | Plug | 1 |
| 11***63 | Cable; (Coiled) | 1 |
168-6500 Cable Gp-Control -Grade
| 14***22 | Cover | 1 |
| 14***25 | Seal-Bushing | 1 |
| 14***26 | Gasket | 1 |
197-7224 Control Gp-Grade & Slope -Premier Control System
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***97 | Plug | 1 |
209-3126 Control Gp-Grade & Slope
| 11***10 | Screw-Pan Head | 8 |
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
209-3130 Control Gp-Grade & Slope
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
239-2367 Control Gp-Grade & Slope
| 12***94 | Sensor Group-Grade | 1 |
| 12***99 | Arm-Follower | 1 |
| 13***83 | Cable As | 1 |
168-5031 Control Gp-Grade & Slope
| 12***36 | Bracket-Mounting | 2 |
| 13***85 | Mount As | 2 |
| 13***87 | Plate | 2 |
197-7848 Sensor Gp-Grade -Sonic
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
122-0094 Sensor Gp-Grade
| 11***29 | Cap-Dust | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 14***16 | Faceplate | 1 |
209-3131 Sensor Gp-Grade -Sonic
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
122-0095 Sensor Gp-Grade -Sonic
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 12***95 | Sensor Group-Grade; -Sonic | 1 |
| 19***54 | Tube As | 1 |
197-7847 Sensor Gp-Grade -Averaging Ski
| 12***91 | Sensor Group-Sonic; -Grade | 1 |
| 19***47 | Sensor Group-Grade; -Averaging Ski | 1 |
| 19***54 | Tube As | 1 |
122-0090 Sensor Gp-Grade -Averaging Ski
| 11***29 | Cap-Dust | 1 |
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
209-3132 Sensor Gp-Grade -Averaging Ski
| 12***95 | Sensor Group-Grade; -Sonic | 1 |
| 13***83 | Cable As | 1 |
| 20***32 | Sensor Group-Grade; -Averaging Ski | 1 |
258-6580 Sensor Gp-Sonic -Averaging Ski
| 25***29 | Mount As | 2 |
| 25***30 | Mount As | 2 |
| 25***80 | Sensor Group-Sonic; -Averaging Ski | 2 |
122-0091 Sensor Gp-Sonic -Grade
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
257-6255 Ski Gp-Averaging
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
Undercarriage
187-3073 Bogie Gp
| 14***76 | Bearing | 2 |
| 17***26 | Shaft | 1 |
| 17***89 | Plate As | 1 |
188-1613 Frame Gp-Track Roller -Lh
| 18***13 | Frame Group-Track Roller; -Lh | 1 |
| 28***75 | Collar | 4 |
| 28***77 | Tube | 2 |
187-3613 Frame Gp-Track Roller -Lh Rear
| 16***13 | Bolt-Hex; (M36 X 4 X 80) | 1 |
| 18***27 | Plate | 1 |
| 18***08 | Frame Group-Track Roller; -Rear, Rh | 1 |
187-3170 Frame Gp-Track Roller -Lh Front
| 14***76 | Bearing | 2 |
| 17***26 | Shaft | 1 |
| 17***89 | Plate As | 1 |
188-1612 Frame Gp-Track Roller -Rh
| 16***13 | Bolt-Hex; (M36 X 4 X 80) | 1 |
| 18***27 | Plate | 1 |
| 18***70 | Frame Group-Track Roller; -Lh Front | 1 |
180-5709 Frame Gp-Track Roller -Rh Front
| 10***59 | Bearing-Sleeve | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 1 |
| 17***81 | Cover | 1 |
180-5708 Frame Gp-Track Roller -Rh Rear
| 10***59 | Bearing-Sleeve | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 1 |
| 17***81 | Cover | 1 |
239-2366 Mounting Gp-Averaging Ski
| 05***03 | Washer; (40.46x69.85x7.37-mm Thk) | 1 |
| 10***79 | Cover As | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
193-2438 Roller Gp-Track
| 03***53 | Ring-Retaining | 2 |
| 05***58 | Stud | 24 |
| 10***59 | Bearing-Sleeve | 2 |
188-0535 Tensioner Gp-Track -Idler Hub
| 03***53 | Ring-Retaining | 2 |
| 10***59 | Bearing-Sleeve | 2 |
| 10***18 | Plate | 2 |
184-0918 Undercarriage Ar
| 10***51 | Harness As-Screed; (Extension) | 1 |
| 18***18 | Undercarriage Ar | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 5 |
AP-655C serial number reference
The PIN plate on the AP-655C is mounted on the paver's main frame/tractor unit, usually on the right-hand side near the frame rail or operator's station riser — check there and also stamped into the frame itself as a backup. The plate reads as an 8-character PIN: a 3-letter prefix identifying the model/serial-break group (e.g., CDG) followed by a 5-digit sequence number (e.g., CDG00001); the prefix is what ties the machine to its correct parts catalog and running changes.
| Prefix | Identifies | Notes |
|---|---|---|
| AYP | Early production run | Machine PIN prefix AYP00001-UP for the AP-655C.BG-2255C track paver, factory-fitted with the 3056 diesel per the machine-level catalog listing. This is the earliest documented serial break for this model. A few resale listings tag one individual AYP-prefix unit with a C4.4 engine instead of 3056 — not corroborated in factory parts documentation, confirm actual engine off the machine's own engine dataplate rather than assuming by prefix. |
| CDG | Mid-run build | Machine PIN prefix CDG00001-UP for the AP-655C.BG-2255C, documented as powered by the 3056 diesel in parts, fluid-capacity, and electrical-schematic listings tied to this exact prefix. Its engine-related parts groups are filed under the same 3056E engine-family catalog section that AYP and CKR also fall under, so there is no confirmed engine-generation split between the three prefixes — treat all three as the same engine family and verify the exact engine arrangement off the dataplate if it matters. |
| CKR | Parallel/mid-run build | Machine PIN prefix CKR00001-UP for the AP-655C.BG-2255C, documented alongside the CDG range in the same hydraulic and parts listings (a brake pump/valve group is listed jointly as 'S/N CDG1-UP; CKR1-UP'), and separately confirmed as powered by the 3056 diesel. This joint listing pattern points to CDG and CKR being a parallel/concurrent serial break rather than a strict before/after split — treat them as concurrent variants until a clearer timeline turns up. |
Frequently asked questions
What engine does the Caterpillar AP-655C use?
The AP-655C runs the Cat 3056/3056E diesel inline-6, about 5.9-6.0 L displacement, rated around 118-130 kW (158-174 hp) depending on configuration.
What is the operating weight of the AP-655C?
Operating weight runs approximately 18,398-19,166 kg (40,560-42,252 lb), varying with screed choice and paving configuration.
What replaced the Caterpillar AP-655C?
The AP-655C was followed by the AP-655D, then the F-series AP-655F, and today's bare-name AP655/AP655F carry the line forward with Cat C4.4/C7.1 ACERT engines and an integrated screed generator — a re-engineered later generation rather than a direct letter-suffix successor.
What AP-655C owners discuss
What do owners say about the 3056/3056E engine in the AP-655C, and where does it actually give trouble?
The base engine on the AP-655C (Perkins-derived Cat 3056/3056E inline-6 with the VP30 electronic rotary injection pump) holds up well mechanically when oil and cooling service is kept current. The recurring complaint is around the VP30 pump and its control side, not the block itself: no-start and mid-shift derate reports show up on higher-hour machines. The pattern reported by technicians is that a weak battery connection, corroded pump connector pins, or a failed fuel shutoff solenoid gets misdiagnosed as a bad pump, leading to needless pump swaps that don't fix the complaint. Before condemning the injection pump, pull stored codes with the electronic service tool, check wiring and connector condition at the pump, and confirm supply voltage under cranking load. Have your dealer verify injection pump timing and run a full electronic diagnostic pass before authorizing pump replacement.
Is there a known hydraulic weak point on the AP-655C's tow point circuit?
Yes. Owners have reported the tow point losing hydraulic pressure (down to roughly 0.7 MPa / 100 psi) while every other function, including the hopper, works normally. On at least one machine the cause traced to the O-rings inside the pressure-reducing valves on both hydraulic manifolds — with age the seals had hardened and crumbled, bleeding pressure out of the tow point circuit. If tow point pressure is low but the rest of the hydraulic system tests fine, pull and inspect both pressure-reducing valves before chasing the main pump or relief valve. A soft tow point can let the paver drift or fail to hold during hookup, so have your dealer verify tow point pressure and valve condition before towing or loading the machine.
What undercarriage wear pattern should Mobil-Trac paver owners expect, and how do you slow it down?
On rubber-tracked pavers like the AP-655C's Mobil-Trac undercarriage, the recurring wear points are track tension, bogie wheel bearings, and asphalt buildup on the drive and tension wheels. Consensus maintenance practice is to check track tension every 50 to 100 hours (running too tight can accelerate wear by as much as 50 percent), and to lift the machine periodically, roughly every two to three months, to check bogie wheel bearings for play or failure. Asphalt that bakes onto the inner wheel path of the track wears through the rubber and exposes the internal reinforcement if it isn't cleaned off; a biodegradable release agent applied before the shift keeps buildup from forming. Buildup on the tension wheel specifically is called out as a cause of steering pull, since it loads the track unevenly.
What screed heating issues come up most on this generation of Cat paver?
The screed heating system is generally regarded as reliable and fast-heating (Cat rates the on-board generator to bring screed plates up to temperature in as little as 15 minutes), but element and connection failures are the most common complaint on aging machines. Symptoms are cold spots or uneven heating across the screed width, which shows up as mat tearing or drag marks rather than an obvious electrical fault. Reported causes include corroded or loose terminals at the heating element connections and individual element failures within a heating zone; the onboard monitoring system is designed to flag a failed zone before it causes a mat defect, so a heating complaint with no fault flagged points first at wiring and connections, not the element itself.
Owners report circuit breakers tripping on these pavers — is that normal, and what should you check first?
The AP-655C uses manual-reset circuit breakers spread across its electrical circuits rather than fuses. A breaker that won't stay reset is a symptom of a downstream short or overload on that circuit, not a defective breaker in most cases. Before replacing a breaker that keeps tripping, check the wiring and connectors feeding that circuit for chafe damage, moisture intrusion, or corrosion, since asphalt-adjacent machines see a lot of heat and vibration at harness routing points. Because a repeatedly tripping breaker can indicate an intermittent short that's a fire or component-damage risk if bypassed, have your dealer verify the circuit before resetting and returning the machine to service if the trip recurs.
What should you inspect when shopping for a used AP-655C?
Confirm the serial prefix (AYP, CDG, or CKR) to make sure you're actually looking at the earlier 3056/3056E Mobil-Trac AP-655C and not a later relabeled machine. Beyond identity, walk the hopper first: check wall thickness and shape, since a flared or bent hopper signals a duty cycle heavy on tight-turn work like cul-de-sacs and parking lots. Inspect the Mobil-Trac undercarriage for track wear, wheel-path rubber condition, and bogie wheel bearing play. Cycle every hydraulic function, including the tow point, and look for weeping cylinders, soft hoses, or slow response. Run the screed heat system through a full cycle and confirm all zones come up evenly and hold temperature. Ask for maintenance records; a paver with documented wear-part replacement and hydraulic upkeep can run two decades, while one with deferred maintenance shows compounding problems across the hopper, track, and hydraulics at the same time. Have your dealer verify engine diagnostics and hydraulic pressures on a pre-purchase inspection before you commit.
What's the overall consensus on how long an AP-655C lasts and what determines it?
The general take from paver owners is that the design itself isn't the limiting factor — with consistent wear-part replacement and hydraulic system upkeep, a paver in this class can stay productive for up to 20 years. What separates a machine still earning money from one that's a parts source is whether the owner stays ahead of hydraulic component wear, greasing intervals, and undercarriage cleaning. Machines that get run hard without that upkeep show hopper deformation, accelerated track wear, and hydraulic leaks showing up together rather than as isolated issues, which is the pattern experienced buyers use to size up how a used unit was actually operated.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific AP-655C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.