Caterpillarasphalt paver
Caterpillar AP-650B
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar AP-650B is a mid-size, track-type asphalt paver built for highway, street, and parking-lot resurfacing work. It runs a Cat 3054 series four-cylinder turbocharged diesel, revised through the production run as the 3054 and 3054C, rated at roughly 121 hp (90 kW) gross. Operating weight varies by configuration, running from about 11.8 t (26,000 lb) for the bare tractor without screed up to roughly 16.3 t (35,950 lb) with an Extend-A-Mat screed fitted. The AP-650B was built from the late 1990s into the mid-2000s, most often paired with an extendable heated vibratory screed that pushes paving width from a base of roughly 1.8-2.4 m (6-8 ft) out to about 5.8-6.1 m (19-20 ft). The model line traces to the Barber-Greene BG-225C paver Cat inherited when it acquired Barber-Greene's asphalt paving business in 1998, and was carried forward under the Cat AP-650B badge before Cat moved this size and track class to the AP-655 family.
Across its production run the AP-650B saw incremental engine updates rather than a ground-up redesign — the shift from the 3054 to the 3054C reflects Cat's emissions-driven engine revisions of the period, not a new model. Screed, hopper, and undercarriage options varied by dealer order, so specification sheets for individual machines can differ more than the base model number suggests. In the used and parts market today, the AP-650B remains a common sight with municipal and highway resurfacing contractors running smaller crews, valued for its straightforward mechanical/hydrostatic drivetrain without the layered electronics of later pavers. Because it shares design DNA with the Barber-Greene-to-Cat transition machines and predates the AP-655 generation, owners keeping these units past two decades of service lean heavily on undercarriage, screed, and heater-system wear parts to keep them productive.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar AP-650B specifications
Engine
| Engine model | Cat 3054TA — four-stroke, four-cylinder, turbocharged and aftercooled diesel |
| Gross power | 90 kW (121 hp) at 2200 rpm (ISO 14396) |
| Net power | 83 kW (112 hp) at 2200 rpm (ISO 9249 / ISO 3046 / EEC 80/1269); 82 kW (111 hp) per SAE J1349; 85 kW (114 hp) per DIN 6271/6272 |
| Displacement | 4.0 L (243 cu in) |
| Bore x stroke | 100 mm x 127 mm (3.937 in x 5 in) |
| Cylinders | 4, inline, transverse-mounted |
| Emissions | Meets EPA/CARB low-emissions engine regulations of its era (pre-Tier numbered standard; no interim/final Tier rating published for this model) |
Weights
| Operating weight — with Extend-A-Mat 8-16B screed | 16 280 kg (35,950 lb) |
| Operating weight — with Pavemaster 8B screed | 14 885 kg (32,765 lb) |
| Tractor weight without screed | approx. 11 790 kg (25,993 lb) — reported by equipment databases, not itemized on the factory sheet, which only lists screed-equipped operating weights |
| Shipping weight | not separately published; operating weight figures above are the working weights typically quoted for transport planning |
| Ground pressure | not published for this model |
Dimensions
| Length with push roller | Extend-A-Mat screed: 6095 mm (20'0"); Pavemaster screed: 5613 mm (18'5") |
| Length with truck hitch | Extend-A-Mat screed: 6578 mm (21'7"); Pavemaster screed: 6095 mm (20'0") |
| Operating width | 3269 mm (10'9"), both screed options |
| Overall height | 3079 mm (10'1"), both screed options |
| Transport width, hoppers raised, with end gates | 2718 mm (8'11") |
| Transport width, hoppers raised, without end gates | 2494 mm (8'2") |
| Transport height, muffler removed | 2623 mm (8'7") |
| Track gauge | 1837 mm (72 in) |
| Track pad size | 127 mm x 356 mm (5 in x 14 in) rubber-bonded pads |
| Minimum turning radius | 914 mm (3 ft), measured at inside track in pave mode |
Performance
| Travel speed | 0-8 km/h (0-5 mph) |
| Paving speed | 0-67 m/min (0-220 ft/min) |
| Standard paving width | 2.44 m (8 ft) |
| Maximum paving range — Extend-A-Mat 8-16B screed | 2.44-4.75 m (8'-15'6") power-extending range; 1.8-6.1 m (6'-20'2") with cutoff shoes and bolt-on extensions |
| Maximum paving range — Pavemaster 8B screed | fixed at 2.44 m (8 ft); 1.8-6.1 m (6'-20') with cutoff shoes and bolt-on extensions |
| Hopper capacity | 5 cu m (177 cu ft) |
| Truck entry width | 3182 mm (10'5") |
| Steering | electric-over-hydraulic dual-path differential steering; pivot-turn by counter-rotating tracks in maneuver mode |
| Gradeability | not published for this model |
Service capacities (summary)
| Fuel tank | 227 L (60 gal) |
| Hydraulic oil tank | 189 L (50 gal) |
| Cooling system | 31.5 L (8.3 gal) |
| Engine oil | not published in available sources |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
AP-650B fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - 3054TA engine | 6.9 L (7.3 US qt / 1.8 US gal) | Cat DEO-ULS SAE 10W-30 for -18C to 40C (0F to 104F); Cat DEO SAE 15W-40 for -9.5C to 50C (15F to 122F); Cat DEO-ULS Cold Weather SAE 0W-40 for colder ambient below -18C. Refill with new Cat oil filter. |
| Cooling system | 31.8 L (8.4 US gal) | Cat ELC (Extended Life Coolant), premix or concentrate mixed 1:1 with water; standard mix protects to about -37C (-34F) and extends change interval versus conventional coolant. |
| Fuel tank | 227 L (60 US gal) | No. 2-D ultra-low-sulfur diesel meeting ASTM D975; switch to a winterized or No. 1-D blend in cold ambient to prevent fuel gelling and filter plugging. |
| Hydraulic system (tank plus hydrostatic propel circuit) | 189 L (50 US gal) | Cat HYDO Advanced 10 (SAE 10W) for -20C to 40C (-4F to 104F); Cat HYDO Advanced 30 for warmer ambient ranges; Cat TDTO is an approved alternate fluid for the combined hydraulic/hydrostatic-drive circuit. |
| Transmission / final drives (track propel) | Not separately charted - hydrostatic drive motors draw from the shared hydraulic system above, no standalone fill | No separate transmission or final-drive fluid; drive circuit runs on the hydraulic system oil listed above. |
| Grease - chassis, track pins/bushings, screed lube points | Spec only - apply at scheduled grease-fitting intervals, no reservoir capacity | Cat Multipurpose Grease (NLGI 2) for general chassis lube points; Cat Prime Application Grease, a moly-fortified NLGI 2 grease, for track pin/bushing and higher-load screed points. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar AP-650B maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the AP-650B beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S oil sampling on the 3054/3054C engine and on the hydrostatic propel and screed hydraulic circuits at every scheduled interval — asphalt dust loads engine air filters and hydraulic tanks faster than typical earthmoving duty. Track coolant condition on the turbocharged four-cylinder diesel, since sustained low-speed mat travel runs it hot for long stretches. Check screed heater burner fuel for water and sediment before each paving season. Catching wear trends early on this drivetrain avoids mid-shift breakdowns on live paving jobs.
Corrective & Common Repairs
Expect track shoe, roller, and idler wear from constant slow-speed creep under load; inspect and reshim the undercarriage on a regular cycle. Auger and conveyor drive chains stretch and gall from abrasive hot mix — replace links before they jump sprockets mid-mat. Screed heater burners clog or lose reliable ignition, which kills mat temperature control. Hydrostatic propel pump or drive motor leaks show up as drift or uneven tracking; chase these before they strand the paver on a lay-down run.
Overhaul & Rebuild Points
Mid-life work centers on the 3054/3054C engine — turbocharger, injectors, and head work once oil analysis shows rising wear metal. Rebuild the hydrostatic propel pump and drive motor as a matched pair, since mismatched wear shortens the rebuild's service life. Screed overhauls cover vibrator bearings, extension slide wear plates, and tamper bar bushings on the heated screed. Plan undercarriage rebuilds — track chain, rollers, idlers — as a full set rather than piecemeal, since uneven wear rates cause tracking problems.
Seasonal & Environment Servicing
Before cold-season paving, verify the screed burner lights reliably and holds mat temperature; a weak burner ruins compaction in cold weather. Check coolant protection and starting aids on the 3054 diesel for early- and late-season cold starts. In hot, dusty summer work, clean the radiator and hydraulic oil coolers often, since asphalt fines cake the fin packs and push hydrostatic drive temperatures up. Recheck track tension after large temperature swings, since undercarriage clearances shift with heat.
AP-650B common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 119-0073 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 1R-1804 | Filter Element-Wtr Sep & Fuel | Fuel system service | Check fitment → |
| 207-2757 | Seal | Fuel system service | Check fitment → |
| 206-5234 | Filter Element As-Air | Air intake service | Check fitment → |
| 206-5235 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
AP-650B fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 1729-03/04 | Left-station propel lever position sensor signal out of range (open circuit or short). | Damaged, disconnected, or corroded wiring/connector at the left propel console, or a failed lever position sensor. | Check the left-station propel lever harness and connector, verify sensor supply and signal voltage against spec, replace the sensor if the fault stays active. |
| CID 1730-03/04 | Right-station propel lever position sensor signal out of range (open circuit or short). | Damaged, disconnected, or corroded wiring/connector at the right propel console, or a failed lever position sensor. | Check the right-station propel lever harness and connector, verify sensor supply and signal voltage against spec, replace the sensor if the fault stays active. |
| CID 1723-02/08 | Left-station propel speed dial sensor signal erratic or abnormal frequency. | Worn or intermittent speed-dial potentiometer, loose connector, or chafed wiring at the left console. | Cycle the dial through its full range while watching the signal on the diagnostic tool, reseat the connector, replace the dial sensor if the signal drops out or jumps. |
| CID 1724-02/08 | Right-station propel speed dial sensor signal erratic or abnormal frequency. | Worn or intermittent speed-dial potentiometer, loose connector, or chafed wiring at the right console. | Cycle the dial through its full range while watching the signal on the diagnostic tool, reseat the connector, replace the dial sensor if the signal drops out or jumps. |
| CID 084-02/08 | Ground (propel) speed sensor signal erratic, missing, or out of range. | Damaged sensor wiring, sensor gap out of adjustment, or debris on the sensing wheel/tone ring in the propel drive. | Inspect sensor mounting and air gap, clean the sensing surface, check wiring continuity, replace the sensor if the fault repeats. |
| CID 110-00 | Engine coolant temperature above normal. | Low coolant level, blocked radiator core, slipping or failed fan drive, or a faulty coolant temperature sensor. | Shut down safely if the light is red, check coolant level and radiator fins for debris, verify fan operation, replace the sensor only if temperature readings disagree with a manual check. |
| CID 100-01 | Engine oil pressure below normal. | Low oil level, plugged oil filter, worn oil pump, or a faulty oil pressure sensor/switch. | Stop the engine immediately, check oil level and filter condition, verify pressure with a mechanical gauge before returning to service. |
| CID 105-00 | Intake manifold (charge) air temperature above normal. | Restricted air intake, dirty air cleaner element, or turbocharger/aftercooling airflow problem. | Check air cleaner restriction indicator, inspect intake ducting for blockage, service or replace the air filter as needed. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
AP-650B attachments & work tools
Screed - Extend-A-Mat 8-16B (power extending)
Variable-width, hydraulically power-extending screed. Base paving width 2.44 m (8 ft), power-extends to 4.75 m (15 ft 6 in); with bolt-on cutoff shoes and extensions the range grows to 1.8-6.1 m (6-20 ft 2 in). Four fuel-oil burners with electric ignition and insulated combustion chambers heat the screed plates; extender slope adjusts on-the-go from 14% below to 2% above horizontal.
Screed - Pavemaster 8B (fixed-width)
Heavy-duty conventional fixed-width screed for simple, economical single-width operation. Fixed base width 2.44 m (8 ft); with cutoff shoes and bolt-on extensions the range is 1.8-6.1 m (6-20 ft). Two fuel-oil burners with electric ignition heat the plates. Lighter than the Extend-A-Mat setup, giving a lower machine operating weight.
Screed extensions and cutoff shoes
Extend-A-Mat accepts 305 mm (1 ft) and 711 mm (2 ft 4 in) bolt-on extensions, the wider one with vibration, the narrower heated only by convection off the main screed; a cutoff shoe package (305 mm/1 ft plus 610 mm/2 ft shoes) trims width down in 76 mm (3 in) steps. Pavemaster extensions come in 152 mm (6 in), 305 mm (1 ft), 610 mm (2 ft, with crown) and 914 mm (3 ft) widths, with heat and vibration available on the 610 mm and 914 mm sizes.
Hydraulic strike-offs
Hydraulic strike-off moldboards extend paving width up to 762 mm (2 ft 6 in) per side on the Pavemaster screed, with on-the-go power height and slope adjustment (down to 8 degrees/14%, no up-slope) as standard; a further 305 mm (1 ft) is available with bolt-on strike-off extensions.
Berm and bevel edge tooling
Berm extensions for the Extend-A-Mat screed mount left or right in 357 mm (14 in), 508 mm (20 in), or 660 mm (26 in) lengths, all with 457 mm (18 in) plates and slope adjustable 0-127 mm (5 in) at the outer edge. Bevel end plates shape mat edges for 38, 51, 64, or 76 mm (1.5, 2, 2.5, 3 in) lift thickness.
Automatic grade and slope control kit
Base package uses two screed-mounted control units plus a slope sensor for full proportional longitudinal grade and transverse slope control; wand or sonic grade sensors are optional upgrades to the basic mechanical feeler.
Grade reference tooling (skis, levelers, stringline)
A triangular-truss rigid ski (9.1 m/30 ft or 12.2 m/40 ft) rides the pavement directly for grade reference. Outboard and inboard travelling levelers (also 9.1 m/30 ft or 12.2 m/40 ft) and a two-section outboard mobile stringline kit (beams, sleds, stringline, pivot pins) offer alternate referencing. A Fore 'N Aft leveler bridges the screed extensions to reference ahead and behind the screed for crown-sensitive work.
Auger/feeder material-handling system
Independent left/right feeders and augers with a material-feed controller keep feeder-to-auger speed ratio automatic across paving widths, removing the need for feeder gates; paddle or sonic auger/feeder sensors are the sensing options. The auger assembly (segmented cast Ni-Hard hemi-screw augers, roughly 406 mm/16 in diameter) is hydraulically height-adjustable about 171 mm (6.75 in) to reduce segregation on coarse mixes and to ease load/unload onto a transport trailer.
Truck-interface hardware
Optional oscillating push rollers give a contact point between paver and delivery truck to center the load and assist steering during material transfer. An optional truck hitch, hydraulically actuated from the operator console, positively locks the truck to the paver while unloading.
Fumes evacuation system
Optional/factory-fit system to pull asphalt fumes out of the auger chamber: shrouds around the chamber feed a hydraulic-driven exhaust fan and duct/stack arrangement that vents fumes away from the operator and screed area.
Lighting and hazard package
Optional lighting package adds four variable-position sealed-beam floodlights (two forward, two rear) for night or low-light paving; a rotating amber hazard beacon is a separate option for roading and jobsite visibility.
Operator station guarding/comfort
The single sliding operator's station (slides 305 mm/12 in beyond either paver edge, seat pivots 152 mm/6 in) can be fitted with a canvas operator umbrella/sunshade on a universal mounting bracket for weather protection; a full cabin canopy option is also offered on this paver class for sun/rain cover over the console and seat.
Undercarriage and track options
Standard steel track undercarriage runs on Cat D3 track-tractor-derived rails with an automatic, manually-adjustment-free tensioning system. Rubber-bonded track pads, roughly 127 x 356 mm (5 x 14 in), use a two-bolt attachment for straightforward pad swaps rather than a quick-coupler system.
All AP-650B assemblies by section
Every catalogued assembly group for the Caterpillar AP-650B. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
239-3058 Air Cleaner Gp
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
| 13***76 | Strainer; (Fuel Pump) | 1 |
204-7034 Air Cleaner Gp -Engine
| 08***92 | Hose As | 1 |
| 10***03 | Plate-Cover | 2 |
| 11***61 | Hose As | 1 |
207-8264 Bracket Gp-Mounting
| 03***17 | Union | 1 |
| 06***64 | Fitting-Flared | 1 |
| 06***65 | Fitting-Brass | 1 |
270-4374 Elbow Gp-Air Inlet
| 14***45 | Valve Group-Solenoid; (24-Volt)(Fuel Shutoff) | 1 |
| 15***68 | Seal-O-Ring | 1 |
| 27***74 | Elbow Group-Air Inlet | 1 |
239-3059 Exhaust Gp
| 14***45 | Valve Group-Solenoid; (24-Volt)(Fuel Shutoff) | 1 |
| 15***68 | Seal-O-Ring | 1 |
| 23***59 | Exhaust Group | 1 |
233-9539 Turbocharger Gp
| 14***45 | Valve Group-Solenoid; (24-Volt)(Fuel Shutoff) | 1 |
| 15***68 | Seal-O-Ring | 1 |
| 23***39 | Turbocharger Group | 1 |
Basic Engine
232-7528 Camshaft Gp
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 20***02 | Cover As; (Power Take-Off) | 1 |
230-9196 Cover Gp-Front Housing
| 11***04 | Seal-O-Ring | 1 |
| 13***88 | Cap-Oil Filler; (Engine) | 1 |
| 15***32 | Seal-O-Ring | 1 |
269-3101 Cover Gp-Valve Mechanism
| 10***38 | Bolt; (M6x20-mm) | 2 |
| 11***04 | Seal-O-Ring | 1 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
234-0251 Cover Gp-Valve Mechanism
| 11***04 | Seal-O-Ring | 1 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 13***88 | Cap-Oil Filler; (Engine) | 1 |
232-7439 Crankshaft Gp
| 21***14 | Gear-Crankshaft; (34-Teeth) | 1 |
| 23***00 | Crankshaft Group | 1 |
| 23***39 | Crankshaft Group | 1 |
232-7400 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 0 |
308-4729 Crankshaft Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 06***02 | Dowel | 10 |
| 06***06 | Plug | 1 |
359-0715 Crankshaft Gp
| 20***19 | Bolt; (M8x1.25x16-mm) | 10 |
| 23***49 | Housing As | 1 |
| 23***04 | Cylinder Block Group | 1 |
232-7604 Cylinder Block Gp
| 06***06 | Plug | 4 |
| 14***79 | Retainer-Valve Spring | 16 |
| 18***82 | Guide-Valve | 8 |
232-7606 Cylinder Block Gp
| 22***01 | Bolt; (M15x1.5x137-mm) | 7 |
| 22***02 | Bolt; (M15x1.5x162-mm) | 3 |
| 23***19 | Cylinder Head Group | 1 |
308-4728 Cylinder Block Gp
| 22***01 | Bolt; (M15x1.5x137-mm) | 7 |
| 22***02 | Bolt; (M15x1.5x162-mm) | 3 |
| 23***19 | Cylinder Head Group | 1 |
232-7524 Cylinder Head Gp
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 12***97 | V-Belt Set; (Includes 2-Belts)(1283-mm) (Fan Drive) | 1 |
| 13***79 | Pulley-Fan Drive | 1 |
232-7519 Cylinder Head Gp
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 13***79 | Pulley-Fan Drive | 1 |
| 23***65 | Spring Extension, Housing As | 1 |
308-4731 Cylinder Head Gp
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 07***06 | Coupling | 2 |
| 07***13 | Sleeve | 1 |
230-9699 Drive Gp-Fan
| 0T***24 | Bolt 9.525 mm(.375 In.) Dia. N. C. | 8 |
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 10***53 | Hose As | 1 |
234-9680 Drive Gp-Fan
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 10 |
| 16***89 | Flywheel As | 1 |
187-8714 Drive Gp-Pump
| 10***57 | Plate | 1 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 14***76 | Housing-Flywheel | 1 |
256-2452 Drive Gp-Pump
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
245-9831 Flywheel Gp
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
223-7825 Housing Gp-Flywheel
| 10***30 | Bolt; (M10x1.5x20-mm) | 4 |
| 22***25 | Housing Group-Flywheel | 1 |
| 22***48 | Plate-Lifting | 1 |
308-4764 Housing Gp-Front
| 19***32 | Support-Front; (Lh) | 1 |
| 19***34 | Support-Front; (Rh) | 1 |
| 19***36 | Stud | 8 |
232-6179 Housing Gp-Front
| 03***34 | Screw | 8 |
| 10***77 | Support As-Engine; (Rh) | 1 |
| 10***78 | Support As-Engine; (Lh) | 1 |
232-3713 Lifting Gp-Engine
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
| 22***04 | Pan As-Oil | 1 |
144-7882 Mounting Gp-Engine
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 4 |
| 14***82 | Mounting Group-Engine | 1 |
252-6456 Mounting Gp-Engine
| 12***36 | Ring-Retaining | 2 |
| 22***36 | Kit-Piston Ring | 1 |
| 22***37 | Piston As | 4 |
232-2565 Pan Gp-Oil -Engine
| 12***36 | Ring-Retaining | 2 |
| 22***36 | Kit-Piston Ring | 1 |
| 22***37 | Piston As | 4 |
308-4730 Piston & Rod Gp
| 30***30 | Piston & Rod Group | 1 |
| 6I***01 | Block | 1 |
| 6I***02 | Pulley | 1 |
232-7442 Piston & Rod Gp
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 23***42 | Piston & Rod Group | 1 |
253-2479 Plug Gp-Engine -Cylinder Block
| 06***95 | Rod | 8 |
| 13***53 | Tappet | 8 |
| 1B***36 | Key-Woodruff | 1 |
232-6204 Plug Gp-Engine
| 06***95 | Rod | 8 |
| 13***53 | Tappet | 8 |
| 18***46 | Screw | 2 |
225-4317 Plug Gp-Engine
| 18***46 | Screw | 2 |
| 22***17 | Plug Group-Engine | 1 |
| 22***25 | Lever As | 4 |
230-7353 Pulley Gp-Crankshaft
| 23***53 | Pulley Group-Crankshaft | 1 |
| 7W***26 | Filter As-Engine Oil | 1 |
360-7351 Pulley Gp-Crankshaft
| 10***61 | Bolt; (M10x1.50x50-mm) | 5 |
| 22***29 | Pump As-Engine Oil | 1 |
| 36***51 | Pulley Group-Crankshaft | 1 |
225-5963 Rocker Arm Gp
| 10***51 | Bolt; (M8x1.25x65-mm) | 1 |
| 22***63 | Rocker Arm Group | 1 |
| 25***69 | Connection Group-Water; (Temperature Regulator) | 1 |
308-4732 Valve Mechanism Gp
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 22***17 | Cooler-Oil; (Engine) | 1 |
| 22***18 | Seal | 2 |
232-7526 Valve Mechanism Gp
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 22***17 | Cooler-Oil; (Engine) | 1 |
| 22***18 | Seal | 2 |
Braking System
192-7472 Brake Gp-Parking
| 05***20 | Pin-Spring | 52 |
| 12***46 | Bar-Feeder | 26 |
| 19***72 | Brake Group-Parking | 1 |
Controls
102-2703 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 1 |
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
8i-0257 Adjuster Gp-Height -Manual
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
197-9844 Chain Gp-Screed
| 06***93 | Lockwasher-Bearing | 2 |
| 10***99 | Jack Group-Sloper | 2 |
| 10***00 | . Axle, Rod End | 2 |
120-5898 Crown Gp-Manual
| 06***66 | Washer | 1 |
| 10***51 | Bolt; (M8x1.25x130-mm) | 1 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 1 |
276-4590 Crown Gp-Power
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 03***25 | Terminal-Ring; (For 3/8" Fastener) | 1 |
| 10***58 | Bracket As-Battery | 1 |
185-4044 Jack Gp-Height Adjuster
| 03***38 | Screw; (6-32x1.0in) | 4 |
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 6 |
102-2699 Jack Gp-Sloper
| 10***99 | Jack Group-Sloper | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
277-2004 Motor Gp-Power Adjuster
| 10***35 | Wire As | 3 |
| 11***68 | Wire As | 3 |
| 12***97 | Wire As | 1 |
282-7961 Shaft Gp-Drive -Non-Actuated
| 28***61 | Shaft Group-Drive; -Non-Actuated | 1 |
| 30***83 | Resistor As; (24-Volt) | 1 |
8i-0213 Sloper Gp-Manual
| 17***96 | Bracket-Mounting | 1 |
| 17***97 | Flange | 1 |
| 17***99 | Separator | 8 |
Cooling System
231-0038 Connection Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 2 |
| 22***38 | Seal-O-Ring | 1 |
354-1274 Cooler Gp-Engine Oil
| 06***86 | Connector | 2 |
| 10***43 | Mount-Flexible | 2 |
| 17***31 | Guard As-Fan | 2 |
232-3722 Cooler Gp-Engine Oil
| 21***74 | Cap-Pressure; (16-Psi)(Radiator) | 1 |
| 21***14 | Spacer; (8.2x18x7-mm Thk) | 2 |
| 22***13 | Aftercooler As-Air | 1 |
238-2799 Cooler Gp-Fltr Base & Eng Oil
| 03***48 | Clip; (11.11mm .437in Id) | 4 |
| 14***11 | Cap-Vented; (Coolant Recovery) | 1 |
| 14***94 | Recovery Group-Coolant | 1 |
230-7355 Pump Gp-Water
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 09***96 | Elbow | 1 |
| 14***67 | Clamp; (Hose) | 1 |
239-3071 Radiator & Hyd Oil Cooler Gp
| 14***67 | Clamp; (Hose) | 1 |
| 19***58 | Muffler As | 1 |
| 23***71 | Radiator & Hydraulic Oil Cooler Group | 1 |
258-6658 Radiator & Hyd Oil Cooler Gp
| 10***16 | Bolt; (M6x16-mm) | 2 |
| 14***53 | Stud | 7 |
| 17***38 | Bolt | 8 |
239-3082 Recovery Gp-Coolant
| 11***18 | Clip | 1 |
| 16***96 | Solenoid Group-Throttle; -Governor | 1 |
| 22***94 | Plate | 1 |
Electrical And Starting System
233-9533 Alternator Gp-Charging
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 23***33 | Alternator Group-Charging | 1 |
241-6128 Battery Gp
| 11***73 | Wiring Group-Hydraulic Control | 1 |
| 15***27 | Horn Group-Electric | 1 |
| 24***27 | Installation Group-Controls | 1 |
257-4405 Box Gp-Junction
| 22***70 | Glow Plug; (24-Volt)(12-Volt) | 4 |
| 23***26 | Clip | 1 |
| 25***05 | Box Group-Junction | 1 |
122-9309 Buffer Gp-Sensor -5000-Hz Pwm
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 0 |
171-7043 Control Gp-Manual Override
| 17***43 | Control Group-Manual Override | 1 |
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
240-5535 Converter Gp-Electrical
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***72 | Body As-Lamp | 1 |
164-7360 Cover Gp-Wiring Harness
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
| 16***60 | Cover Group-Wiring Harness | 1 |
155-2651 Distributor Gp-Electronic
| 03***14 | Screw; (10-32x1-In) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
241-6099 Electrical Ar
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***99 | Harness As-Lighting; (Floodlights)(Rear) | 2 |
| 11***17 | Plate | 2 |
233-9834 Glow Plug Gp
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 23***34 | Glow Plug Group | 1 |
241-6127 Installation Gp-Controls
| 09***47 | Brush As | 1 |
| 11***94 | Bell; (Rear) | 1 |
| 11***61 | Bearing | 2 |
162-3294 Lamp Gp-Flood
| 11***07 | Knob | 2 |
| 12***44 | Paddle As | 2 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
9x-1439 Lamp Gp-Flood
| 11***24 | Clamp | 2 |
| 16***41 | Support-Sensor | 2 |
| 1G***11 | Shaft-Governor Control | 2 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
148-7260 Lamp Gp-Warning Beacon
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***60 | Lamp Group-Warning Beacon | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
338-1132 Lamp Gp-Warning Beacon -Amber, Strobe
| 12***50 | Receptacle As | 1 |
| 12***51 | Bushing | 1 |
| 12***52 | Clamp As-Cable | 1 |
246-2110 Lighting Gp-Flood
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 24***10 | Lighting Group-Flood | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
160-7395 Module Gp-Timer
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***95 | Module Group-Timer; -Governor Control | 1 |
| 16***09 | Nut-Special | 1 |
170-7071 Motor Gp-Electric -Fuel Transfer Pump
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***71 | Motor Group-Electric; -Fuel Transfer Pump | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
145-8519 Sensor Gp-Auger
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***19 | Sensor Group-Auger | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
168-7855 Sensor Gp-Feeder
| 16***55 | Sensor Group-Feeder | 1 |
| 22***50 | Starting Motor Group-Electric | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
284-8876 Sensor Gp-Position
| 28***76 | Sensor Group-Position | 1 |
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
214-4863 Sensor Gp-Position
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 21***63 | Sensor Group-Position; -Rotary-Tc Impeller Clutch, Lh Pedal | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
219-2385 Sensor Gp-Position -Auger
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 21***85 | Sensor Group-Position; -Auger | 1 |
168-3551 Sensor Gp-Position -Steering
| 16***51 | Sensor Group-Position; -Steering | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
118-6240 Sensor Gp-Speed -Propel
| 11***18 | Clip | 3 |
| 11***40 | Sensor Group-Speed; -Propel | 1 |
| 13***89 | Clip; (Ladder) | 5 |
160-7396 Solenoid Gp-Throttle -Governor
| 01***80 | Lockwasher | 2 |
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
230-7304 Starting Motor Gp-Electric
| 07***32 | Filter Element-Breather; (Hydraulic Oil Filter) | 1 |
| 07***26 | Gasket | 2 |
| 07***12 | Fitting-Breather | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2K***68 | Locknut | 1 |
| 4B***06 | Setscrew-Socket; (1/4-20x0.25-In) | 1 |
| 4K***86 | Seal (1.114" Inside Diameter) | 1 |
172-8660 Switch Gp-Liquid Level -Hydraulic Tank
| 03***39 | Ring-Back-Up | 1 |
| 12***75 | Ring-Wear | 2 |
| 13***19 | Kit-Seal; (Extender Cylinder) | 1 |
167-0138 Switch Gp-Magnetic -Main Relay
| 13***21 | Kit-Seal; (Hopper Cylinder) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 5E***32 | Ring | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 17***34 | Kit-Seal; (Towpoint Cylinder) | 1 |
| 17***36 | Ring-Wear | 1 |
| 17***40 | Seal-Cap | 1 |
245-3293 Wiring Gp-Engine
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 23***05 | Kit-Seal; (Screed Hoist Cylinder) | 1 |
| 24***73 | Ring-Retaining | 1 |
257-4408 Wiring Gp-Engine
| 24***11 | Ring-Retaining | 1 |
| 24***14 | Kit-Seal; (Auger Hoist) | 1 |
| 25***08 | Wiring Group-Engine | 1 |
115-2273 Wiring Gp-Hydraulic Control
| 11***73 | Wiring Group-Hydraulic Control | 1 |
| 24***11 | Ring-Retaining | 1 |
| 25***75 | Kit-Seal; (Auger Hoist) | 1 |
Engine Arrangement
241-6102 Engine Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***80 | Sensor As-Speed; (Engine) | 1 |
304-6909 Engine Ar
| 29***55 | Bulb,C5w, 24v, 5w; Washer - Starting Jaw, Bulb,C5w, 24v, 5w; 24v 5w, Bulb,C5w, 24v, 5w, Engine Ar-Primary, Bulb,C5w, 24v, 5w; C5w, 24v, 5w | 1 |
| 30***09 | Engine Ar | 1 |
304-6910 Engine Ar
| 29***47 | Engine Ar-Primary | 1 |
| 30***10 | Hose; Air, Engine Ar | 1 |
304-7046 Engine Ar
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
| 23***04 | Starting Motor Group-Electric | 1 |
239-3056 Engine Ar
| 14***82 | Mounting Group-Engine | 1 |
| 23***56 | Engine Ar | 2 |
| 23***58 | Air Cleaner Group | 1 |
297-4047 Engine Ar-Primary
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
| 23***04 | Starting Motor Group-Electric | 1 |
297-4055 Engine Ar-Primary
| 14***82 | Mounting Group-Engine | 1 |
| 23***58 | Air Cleaner Group | 1 |
| 23***59 | Exhaust Group | 1 |
177-9752 Engine Ar-Primary
| 17***52 | Engine Ar-Primary | 1 |
| 22***25 | Housing Group-Flywheel | 1 |
| 22***17 | Plug Group-Engine | 1 |
304-6811 Installation Ar-Engine
| 1B***36 | Key-Woodruff | 1 |
| 22***67 | Camshaft | 1 |
| 30***11 | Installation Ar-Engine | 1 |
Feeder Drag And Auger Conveyors
201-5584 Bearing Gp-Auger
| 1G***48 | Tube | 2 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 20***84 | Bearing Group-Auger | 1 |
116-9509 Bearing Gp-Auger
| 11***09 | Bearing Group-Auger | 1 |
| 1G***48 | Tube | 2 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 2 |
106-9688 Bearing Gp-Auger
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 08***43 | Gear-Cluster | 3 |
106-9718 Bearing Gp-Auger
| 08***44 | Gear-Input | 1 |
| 08***83 | Washer; (Thrust) | 1 |
| 09***78 | Pin-Spring | 3 |
280-9923 Chain Gp-Conveyor
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 28***23 | Chain Group-Conveyor | 1 |
115-2303 Conveyor Ar-Drag & Auger
| 08***53 | Shaft-Governor Control | 1 |
| 11***03 | Conveyor Ar-Drag & Auger | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
228-9064 Conveyor Gp-Auger
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 22***64 | Conveyor Group-Auger | 1 |
115-2304 Conveyor Gp-Drag
| 08***53 | Shaft-Governor Control | 1 |
| 11***04 | Conveyor Group-Drag | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
8i-0852 Drive Gp-Conveyor -Drag Conveyor
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 34***65 | Segment-Half Auger; (Lh) | 3 |
8i-0866 Drive Gp-Conveyor
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 7X***34 | Bolt-Plt; (1/2unc X 5) | 4 |
5e-9808 Extension Gp-Auger -1-Ft, Lh
| 10***13 | Hose As | 2 |
| 10***14 | Hose As | 2 |
| 11***43 | Tube As | 2 |
5e-9826 Extension Gp-Auger -2-Ft, Rh
| 06***66 | Bolt; (3/4-10x1.642-In) | 2 |
| 11***52 | Plate | 1 |
| 5E***26 | Extension Group-Auger; -2-Ft, Rh | 1 |
1g-9347 Extension Gp-Auger -6 In
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
5e-9825 Extension Gp-Auger -2-Ft, Lh
| 03***83 | Spacer | 16 |
| 03***53 | Ring-Retaining | 2 |
| 05***74 | Pin | 2 |
5e-9809 Extension Gp-Auger -1-Ft, Rh
| 03***21 | Bolt-Allen Hd; (3/8unc X 1) | 4 |
| 10***30 | Bearing-Flange | 1 |
| 10***70 | Key-Square | 1 |
122-0702 Footshaft Gp
| 12***02 | Footshaft Group | 1 |
| 14***60 | Plate | 1 |
| 24***30 | Panel As | 1 |
115-2306 Guard Gp-Feeder
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 17 |
| 03***73 | Bolt; (3/8-16x1.5-In) | 8 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
115-2279 Lines Gp-Lubrication
| 10***31 | Nut-Spring | 8 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 8 |
| 10***82 | Scale; (Rh)(Screed Ext) | 1 |
228-5756 Shaft Gp-Feeder Drive
| 10***88 | Extension As | 1 |
| 22***56 | Shaft Group-Feeder Drive | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 3 |
Frame And Body
253-1002 Arm Gp-Drop
| 10***90 | Extension As | 1 |
| 25***02 | Arm Group-Drop | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 3 |
117-9516 Arm Gp-Tow
| 11***16 | Arm Group-Tow | 1 |
| 12***78 | Bar | 2 |
| 12***20 | Shim; (1.65-mm Thk) | 4 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
109-2722 Bracket Gp-Support
| 03***72 | Bolt; (3/8-16-Thd) | 2 |
| 10***04 | Name-Plate (Portuguese), Angle | 1 |
| 10***22 | Bracket Group-Support | 1 |
244-6927 Cover Gp-Access -Without Ventilation
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
244-6926 Cover Gp-Access
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
241-6113 Cover Gp-Engine & Platform
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***68 | Grip-Handle | 2 |
| 10***70 | Support As | 2 |
8i-0291 Deflector Gp
| 16***99 | Guard; (Lh) | 1 |
| 16***00 | Guard; (Rh) | 1 |
| 16***09 | Deflector | 1 |
215-7553 Extension Gp-Main Frame
| 11***15 | Step As | 1 |
| 11***34 | Bracket As; (Rh) | 1 |
| 11***03 | Bracket As; (Lh) | 1 |
106-9714 Extension Gp-Main Frame -1 Ft
| 03***74 | Keeper | 1 |
| 10***39 | Tube As | 1 |
| 10***41 | Tube As | 1 |
106-9715 Extension Gp-Main Frame -2 Ft
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 10***04 | Flashing-Rigid | 2 |
| 10***18 | Round | 2 |
186-3637 Extension Gp-Main Frame
| 18***37 | Extension Group-Main Frame | 1 |
| 24***26 | Cover Group-Access | 1 |
| 24***62 | Ventilation Group-Paver | 1 |
245-8410 Frame Gp-Main
| 10***79 | Guide Group-Steering | 1 |
| 11***16 | Arm Group-Tow | 1 |
| 11***65 | Beam Group-Transverse | 1 |
287-6598 Frame Gp-Screed
| 06***35 | Lock Pin | 2 |
| 10***42 | Bar | 1 |
| 12***95 | Rod | 1 |
120-5906 Frame Gp-Screed
| 10***89 | Brace Group | 1 |
| 10***22 | Bracket Group-Support | 1 |
| 12***06 | Frame Group-Screed | 1 |
145-9438 Gate Gp-End
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***38 | Gate Group-End | 1 |
168-0232 Guard Gp-Deflector
| 00***31 | Cup-Bearing | 4 |
| 00***32 | Cone-Bearing | 2 |
| 10***58 | Shim; (1.5-mm Thk) | 4 |
104-6579 Guide Gp-Steering
| 10***79 | Guide Group-Steering | 1 |
| 10***58 | Shim; (1.5-mm Thk) | 4 |
| 10***59 | Shim; (0.51-mm Thk) | 2 |
172-3961 Hopper Gp
| 10***58 | Shim; (1.5-mm Thk) | 4 |
| 10***59 | Shim; (0.51-mm Thk) | 2 |
| 10***66 | Washer-Hard; (128.25x165x6.35-mm Thk) | 1 |
245-4392 Installation Ar-Platform Cover
| 10***58 | Shim; (1.5-mm Thk) | 4 |
| 10***59 | Shim; (0.51-mm Thk) | 2 |
| 10***66 | Washer-Hard; (128.25x165x6.35-mm Thk) | 1 |
118-7295 Step Gp
| 10***58 | Shim; (1.5-mm Thk) | 4 |
| 10***59 | Shim; (0.51-mm Thk) | 2 |
| 10***66 | Washer-Hard; (128.25x165x6.35-mm Thk) | 1 |
241-6101 Structural Ar
| 10***83 | Planetary Group-Final Drive | 1 |
| 10***84 | Sprocket-Track | 1 |
| 12***25 | Plate | 1 |
169-5471 Support Gp-Frame
| 00***31 | Cup-Bearing | 2 |
| 00***32 | Cone-Bearing | 1 |
| 10***91 | Pin | 2 |
121-6173 Support Gp-Tow Arm
| 11***22 | Bushing-Track | 46 |
| 12***73 | Support Group-Tow Arm | 1 |
| 25***02 | Seal As | 92 |
245-1162 Ventilation Gp-Paver
| 24***62 | Ventilation Group-Paver | 1 |
| 28***75 | Collar | 4 |
| 28***77 | Tube | 2 |
Fuel System
257-4402 Governor Gp
| 03***17 | Union | 1 |
| 06***64 | Fitting-Flared | 1 |
| 06***65 | Fitting-Brass | 1 |
241-6108 Lines Gp-Fuel
| 12***72 | Bolt | 3 |
| 21***08 | Fitting; (Quick Disconnect, Male) | 1 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
192-4302 Pump Gp-Fuel
| 12***72 | Bolt | 3 |
| 19***02 | Pump Group-Fuel | 1 |
| 21***08 | Fitting; (Quick Disconnect, Male) | 1 |
284-4999 Pump Gp-Fuel Injection
| 10***03 | Adjuster Group-Height; -Manual | 2 |
| 10***04 | Bolt-Shoulder | 2 |
| 10***24 | Tube As; (Vertical) | 4 |
308-4733 Pump Gp-Fuel Injection
| 10***47 | Gear-Worm | 1 |
| 10***50 | Guide-Bushing | 1 |
| 11***81 | Worm | 1 |
248-2367 Pump Gp-Fuel Injection
| 08***68 | Spacer | 1 |
| 17***71 | Motor Group-Electric; -Fuel Transfer Pump | 1 |
| 19***02 | Pump Group-Fuel | 1 |
236-6910 Pump Gp-Fuel Injection
| 1R***04 | Filter Element-Wtr Sep & Fuel | 1 |
| 20***57 | Seal; (Fuel Filter) | 1 |
| 22***14 | Bowl As | 1 |
233-9526 Pump Gp-Fuel Injection
| 1R***04 | Filter Element-Wtr Sep & Fuel | 1 |
| 20***57 | Seal; (Fuel Filter) | 1 |
| 22***14 | Bowl As | 1 |
233-9417 Pump Gp-Fuel Prm & Prim Filter
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 05***09 | Bolt-Socket Head | 4 |
| 10***87 | Link-Connecting | 1 |
270-6992 Pump Gp-Fuel Prm & Prim Filter
| 10***01 | .. Roller, Bearing | 2 |
| 10***38 | Pointer | 1 |
| 10***39 | Key-Square | 1 |
299-9265 Pump Gp-Fuel Prm & Prim Filter
| 18***65 | Jack Group-Height Adjuster | 1 |
| 1F***50 | Nut Rops Support | 1 |
| 29***65 | Pump Group-Fuel Prm & Prim Filter | 1 |
149-5380 Pump Gp-Fuel Transfer
| 10***46 | Gear-Worm | 1 |
| 10***49 | Guide-Bushing | 1 |
| 10***64 | Bearing-Thrust | 2 |
Grade References
200-0738 Gauge Gp-Indicator -Tow Point
| 10***04 | Tube; (1.1-M) | 1 |
| 10***34 | Tube As | 1 |
| 10***49 | Collar | 2 |
109-5626 Leveler Gp -Outboard
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 4 |
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 08***67 | Film-Warning; (No Step)(No Step) | 2 |
109-5625 Leveler Gp -30-Ft Grade Reference
| 08***54 | Film-Notice; (Screed Retract) | 2 |
| 10***08 | Film; (Screed Adjustment)(Extender Screed) | 1 |
| 10***14 | Handle | 1 |
109-5623 Leveler Gp -30-Ft Grade Reference
| 08***77 | Adapter | 1 |
| 10***23 | Leveler Group; -30-Ft Grade Reference | 1 |
| 1G***70 | Extension-Curve | 1 |
109-5622 Leveler Gp -40-Ft Grade Reference
| 10***22 | Leveler Group; -40-Ft Grade Reference | 1 |
| 25***97 | Plate & Film Group; -Ap-650b | 1 |
109-5624 Leveler Gp -30-Ft Grade Reference
| 10***24 | Leveler Group; -30-Ft Grade Reference | 1 |
| 15***59 | Film; (Conveyor Control Module) | 1 |
| 15***65 | Film; (Propel Ecm) | 1 |
109-5627 Leveler Gp -40-Ft Grade Reference
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 17***28 | Fitting-Swivel | 1 |
| 17***29 | Seal-V-Ring | 1 |
109-5628 Leveler Gp -30-Ft Grade Reference
| 08***89 | Reel Group-Washdown Hose | 1 |
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
| 12***24 | Hose As | 1 |
Hydraulic System
077-3951 Cap Gp-Hydraulic Oil Filler
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***51 | Cap As-Filler Breather | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
203-4275 Cylinder Gp-Hydraulic -Auger Hoist, Rh
| 13***18 | Cylinder Group-Hydraulic; -Extender | 2 |
| 14***65 | Elbow | 2 |
| 14***74 | Elbow As | 4 |
135-9444 Cylinder Gp-Hydraulic -Tow Point
| 03***73 | Bolt; (3/8-16x1.5-In) | 2 |
| 03***47 | Spacer | 3 |
| 07***84 | Clamp | 2 |
135-0220 Cylinder Gp-Hydraulic -Hopper
| 09***82 | Hose As | 1 |
| 10***04 | Hose As | 1 |
| 11***70 | Hose As | 1 |
8c-9493 Cylinder Gp-Hydraulic -Track Tension
| 12***73 | Filter-Oil; (Standard Efficiency)(Oil) | 1 |
| 17***22 | Bowl | 1 |
| 17***23 | Seal | 2 |
203-4276 Cylinder Gp-Hydraulic -Auger Hoist, Lh
| 13***18 | Cylinder Group-Hydraulic; -Extender | 2 |
| 14***65 | Elbow | 2 |
| 14***74 | Elbow As | 4 |
203-4273 Cylinder Gp-Hydraulic -Screed Hoist
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 13***18 | Cylinder Group-Hydraulic; -Extender | 2 |
| 14***65 | Elbow | 2 |
135-0218 Cylinder Gp-Hydraulic -Extender
| 11***76 | Lines Group-Propel | 1 |
| 11***79 | Lines Group-Lubrication | 1 |
| 11***80 | Lines Group-Grade & Slope | 1 |
177-0264 Filter Gp-Oil -Hydraulic, Conveyor
| 07***84 | Clamp | 1 |
| 08***56 | Nut | 2 |
| 10***01 | Pin As | 2 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 12***70 | Hose As | 2 |
| 13***44 | Cylinder Group-Hydraulic; -Tow Point | 2 |
| 14***04 | Hose As | 2 |
241-6100 Hydraulic Ar
| 14***33 | Connector As | 1 |
| 15***40 | Elbow | 1 |
| 17***50 | Hose As | 1 |
257-4410 Lines Gp-Brake & Shift
| 10***39 | Key-Square | 1 |
| 12***48 | Hose As | 1 |
| 14***49 | Hose As | 1 |
241-6126 Lines Gp-Conveyor
| 10***57 | Connector | 1 |
| 11***76 | Hose As | 1 |
| 12***07 | Channel | 1 |
112-3468 Lines Gp-Extension
| 10***06 | Pin | 2 |
| 10***09 | Hose As | 1 |
| 10***79 | Pin | 2 |
115-2280 Lines Gp-Grade & Slope
| 08***42 | Valve Group-Relief; -Track Tension | 2 |
| 10***93 | Pin | 4 |
| 11***65 | Tube As | 2 |
257-4409 Lines Gp-Hopper
| 08***42 | Valve Group-Relief; -Track Tension | 2 |
| 10***93 | Pin | 4 |
| 11***65 | Tube As | 2 |
241-6117 Lines Gp-Hydraulic Oil Cooler
| 08***73 | Clamp | 6 |
| 12***43 | Tube As | 1 |
| 12***44 | Tube As | 1 |
257-4403 Lines Gp-Paver Ventilation
| 07***84 | Clamp | 6 |
| 08***86 | Clamp | 2 |
| 10***84 | Hose As | 2 |
228-5851 Lines Gp-Screed Drive
| 22***51 | Lines Group-Screed Drive | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
115-2283 Lines Gp-Screed Elevation
| 11***83 | Lines Group-Screed Elevation | 1 |
| 16***39 | Shim; (1.75-mm Thk) | 1 |
| 1F***22 | Bearing (.500" Long) | 4 |
257-4411 Lines Gp-Track Tension
| 03***20 | Ring | 4 |
| 07***53 | Pin; (Spring) | 4 |
| 10***83 | Bearing | 2 |
125-8104 Lines Gp-Truck Hitch
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
112-3466 Lines Gp-Vibratory
| 11***66 | Lines Group-Vibratory | 1 |
| 24***29 | Kit-Seal; (Screed Gear Pump) | 1 |
| 24***41 | Kit-Solenoid Valve; (Screed Gear Pump) | 1 |
127-5435 Manifold Gp-Cooling
| 12***35 | Manifold Group-Cooling | 1 |
| 24***41 | Kit-Solenoid Valve; (Screed Gear Pump) | 1 |
| 26***42 | Kit-Seal | 1 |
107-0002 Manifold Gp-Suction
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 2 |
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 8 |
| 05***33 | Seal | 1 |
197-1728 Motor Gp-Gear -Blower Fan
| 03***04 | Key | 1 |
| 03***05 | Seal-O-Ring | 2 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
8i-0721 Motor Gp-Gerotor -Vibratory
| 03***04 | Key | 1 |
| 03***05 | Seal-O-Ring | 2 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
105-8882 Motor Gp-Piston -Propel
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 1 |
223-0581 Motor Gp-Piston -Drag Conveyor
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 2 |
226-2451 Pump Gp-Gear -Screed
| 00***83 | Ring-Snap | 1 |
| 22***51 | Pump Group-Gear; -Screed | 1 |
| 9T***57 | Pin | 3 |
267-9475 Pump Gp-Gear -Screed
| 00***15 | Nipple-Pipe; (59.4mm Long) | 1 |
| 07***51 | Cap As-Filler Breather | 1 |
| 10***40 | Tank As-Hydraulic | 1 |
105-8881 Pump Gp-Piston -Propel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***81 | Pump Group-Piston; -Propel | 1 |
| 10***09 | Kit-Bolt | 2 |
185-3509 Pump Gp-Piston -Conveyor, Rh
| 18***09 | Pump Group-Piston; -Conveyor, Rh | 1 |
| 19***47 | Valve Group-Control; (Vibratory) | 1 |
| 19***41 | Cartridge As-Valve | 1 |
8i-0836 Pump Gp-Piston -Auxiliary
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***26 | Tank Group-Hydraulic | 1 |
| 12***00 | Plate | 1 |
185-3508 Pump Gp-Piston -Conveyor, Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***29 | Nut-Retaining | 4 |
| 11***44 | Valve-Solenoid | 4 |
105-8880 Pump Gp-Piston -Propel
| 08***80 | Case As | 4 |
| 08***83 | Body | 2 |
| 08***85 | Spring | 4 |
6e-6569 Rotating Gp-Pump
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***29 | Nut-Retaining | 2 |
| 10***33 | Valve-Check | 1 |
9t-2031 Rotating Gp-Pump
| 07***27 | Kit-Seal; (Counterbalance Valve) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 12***16 | Solenoid As | 2 |
125-9224 Tank Gp-Hydraulic
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 12***24 | Tank Group-Hydraulic | 1 |
111-1326 Tank Gp-Hydraulic
| 11***26 | Tank Group-Hydraulic | 1 |
| 17***45 | Kit-Seal; (Pressure Reducing Valve) | 1 |
| 17***46 | Valve | 1 |
134-4720 Valve Gp-Bank -Auger Hoist, Screed Hoist
| 13***20 | Valve Group-Bank; -Auger Hoist, Screed Hoist | 1 |
| 4J***33 | Seal Fuel Injection Pump | 1 |
| 5L***58 | Seal 14 mm(.551 In.) I. D. | 1 |
124-9988 Valve Gp-Control -Brake, Shift, Throttle
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***21 | Coil | 2 |
| 12***88 | Valve Group-Control; -Brake, Shift, Throttle | 1 |
216-7961 Valve Gp-Control -Conveyor
| 09***99 | Fitting-Grease; (Hydraulic) | 3 |
| 10***90 | Coupling | 4 |
| 10***95 | Bearing | 8 |
115-7183 Valve Gp-Control -Right Grade, Hopper
| 11***83 | Valve Group-Control; -Right Grade, Hopper | 1 |
| 6R***80 | Valve As; (Relief) | 1 |
| 6R***81 | Valve As; (Needle) | 1 |
208-1632 Valve Gp-Control -Vibratory
| 20***32 | Valve Group-Control; -Vibratory | 1 |
| 25***57 | Kit-Seal; (Check Valve) | 1 |
| 25***37 | Valve Group-Solenoid; (24-Volt) | 1 |
169-0166 Valve Gp-Counterbalance -Screed
| 11***98 | Console Group-Operator | 1 |
| 16***66 | Valve Group-Counterbalance; -Screed | 1 |
168-8609 Valve Gp-Pressure Reducing -Truck Hitch
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 4 |
| 03***49 | Nut-Self Lock; (No.10.Unc) | 4 |
| 08***53 | Bolt; (3/8-16x0.625-In)(3/8-16-2a Thd) | 2 |
257-5145 Valve Gp-Pump Control -Auxiliary Pump
| 16***01 | Horn As; (24-Volt, Low Tone) | 1 |
| 25***45 | Valve Group-Pump Control; -Auxiliary Pump | 1 |
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 1 |
152-7576 Valve Gp-Pump Control -Conveyor
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***81 | Kit-Gauge Housing | 1 |
| 11***86 | Track Group | 1 |
087-1442 Valve Gp-Relief -Track Tension
| 08***42 | Valve Group-Relief; -Track Tension | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***01 | Horn As; (24-Volt, Low Tone) | 1 |
300-0504 Valve Gp-Solenoid -Extender, Slope
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
103-3602 Valve Gp-Solenoid
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 1 |
| 10***03 | Wire As | 2 |
| 11***84 | Wire As | 1 |
8i-0142 Vibratory Gp
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 5 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 5 |
| 6V***68 | Nut (6-32)Thd; (No. 6-32) | 5 |
Implements
106-3483 Extension Ar -Diesel Heat, 28-In
| 10***95 | Bearing | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
106-3482 Extension Ar -Diesel Heat, 12-In
| 10***95 | Bearing | 2 |
| 10***12 | Shaft As-Vibratory | 1 |
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
185-5433 Extension Ar-Auger
| 18***33 | Extension Ar-Auger | 1 |
| 1A***68 | Nut | 4 |
| 20***59 | Plate | 1 |
150-7725 Extension Ar-Screed -20-Ft 2-In
| 14***18 | Connector As | 1 |
| 15***25 | Extension Ar-Screed; -20-Ft 2-In | 1 |
| 16***05 | Connector As | 1 |
206-6724 Extension Ar-Screed -20-Ft
| 12***04 | Lines Group-Truck Hitch | 1 |
| 16***77 | Hitch Group-Truck | 1 |
| 20***24 | Extension Ar-Screed; -20-Ft | 1 |
122-0604 Extension Ar-Screed -17-Ft 6-In
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
206-6725 Extension Ar-Screed -16-Ft
| 11***96 | Roller Group-Push | 1 |
| 20***25 | Extension Ar-Screed; -16-Ft | 1 |
| 5C***66 | Bolt (25 mm Long); (5/8-11x1-In) | 1 |
206-6726 Extension Ar-Screed -18-Ft
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 10***64 | Shaft As | 2 |
| 11***95 | Roller As | 1 |
8i-0521 Extension Gp-Screed -Diesel Heat With Vibration, 28-In
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 10 |
| 08***15 | Cushion-Rubber | 2 |
| 12***80 | Mount As | 1 |
185-5419 Extension Gp-Screed -Diesel Heat, 12-In
| 10***76 | Mounting Group-Control; -Grade Sensor | 2 |
| 11***29 | Cap-Dust | 1 |
| 12***48 | Mounting Group-Control; -Premier Control System | 1 |
8i-0520 Extension Gp-Screed -Diesel Heat, 12-In
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 24***28 | Seal | 1 |
| 24***41 | Kit-Bearing; (Drive Shaft) | 2 |
185-5408 Extension Gp-Screed -Diesel Heat, 24-In
| 10***63 | Clamp | 1 |
| 11***95 | Plug | 1 |
| 11***63 | Cable; (Coiled) | 1 |
166-7677 Hitch Gp-Truck
| 11***29 | Cap-Dust | 1 |
| 12***36 | Bracket-Mounting | 2 |
| 13***85 | Mount As | 2 |
166-7676 Hitch Gp-Truck
| 14***22 | Cover | 1 |
| 14***25 | Seal-Bushing | 1 |
| 14***26 | Gasket | 1 |
125-8105 Installation Ar-Truck Hitch
| 11***29 | Cap-Dust | 1 |
| 12***36 | Bracket-Mounting | 2 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
112-0897 Roller Ar-Push
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***97 | Plug | 1 |
112-0896 Roller Gp-Push
| 11***10 | Screw-Pan Head | 8 |
| 11***96 | Roller Group-Push | 1 |
| 11***50 | Kit-Transducer | 1 |
112-1276 Shaft Gp-Drive -Eccentric Weight
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***76 | Shaft Group-Drive; -Eccentric Weight | 1 |
Lubrication System
232-7378 Filter Gp-Engine Oil
| 22***41 | Plug | 1 |
| 22***44 | Gasket; (Engine Oil Filter Base) | 2 |
| 23***22 | Cooler Group-Engine Oil | 1 |
230-7578 Pump Gp-Engine Oil
| 22***41 | Plug | 1 |
| 22***44 | Gasket; (Engine Oil Filter Base) | 2 |
| 23***78 | Pump Group-Engine Oil | 1 |
Machine Arrangement
262-0817 Common Ar -Bg-225c
| 10***86 | Seat Group | 1 |
| 11***90 | Undercarriage Ar | 1 |
| 11***03 | Conveyor Ar-Drag & Auger | 1 |
241-6098 Common Ar -Ap-650b
| 10***86 | Seat Group | 1 |
| 11***90 | Undercarriage Ar | 1 |
| 11***03 | Conveyor Ar-Drag & Auger | 1 |
304-6810 Common Ar
| 11***66 | Lines Group-Vibratory | 1 |
| 11***68 | Lines Group-Extension | 1 |
| 12***98 | Crown Group-Manual | 1 |
241-6776 Screed Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***80 | Sensor As-Speed; (Engine) | 1 |
Operator Station
115-2446 Console Ar
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 07***00 | Switch As-Toggle; (Starter Engine Battery Charger) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
115-2298 Console Gp-Operator
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 07***00 | Switch As-Toggle; (Starter Engine Battery Charger) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
114-0322 Gauge Gp-Cluster
| 10***47 | Pin | 2 |
| 10***89 | Plate As | 1 |
| 10***56 | Rod; (Prop) | 1 |
155-3527 Horn Gp-Electric
| 11***14 | Platform As-Top | 1 |
| 14***74 | Extension As-Platform | 2 |
| 15***27 | Horn Group-Electric | 1 |
187-1885 Kit-Panel
| 10***17 | Post As-Seat | 1 |
| 11***84 | Seat Group | 1 |
| 13***87 | Locknut | 2 |
132-3090 Lever Gp-Propel
| 10***17 | Post As-Seat | 1 |
| 13***90 | Lever Group-Propel | 1 |
| 13***87 | Locknut | 2 |
199-8398 Module Gp-Speedometer & Tach
| 19***76 | Kit-Armrest; (Lh) | 1 |
| 19***77 | Kit-Armrest; (Rh) | 1 |
| 19***78 | Arm; (Lh) | 1 |
190-4185 Panel Gp-Instrument
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 08***11 | Ring | 2 |
| 10***12 | Bracket As-Motor | 1 |
140-8379 Platform Gp
| 14***79 | Platform Group | 1 |
245-2885 Platform Gp-Operator
| 07***92 | Filter-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 24***85 | Platform Group-Operator | 1 |
103-4786 Seat Gp
| 08***52 | Hose As | 1 |
| 0T***68 | Bolt,Machine; Tube Mounting And Tube To Junction Block Uoc:Bsv,Bsx | 28 |
| 10***86 | Seat Group | 1 |
103-7332 Seat Gp
| 03***28 | Seal-O-Ring | 5 |
| 07***90 | Ring-Retaining | 1 |
| 10***32 | Seat Group | 1 |
119-1784 Seat Gp
| 10***11 | Fitting | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 10***88 | Support As-Bearing | 1 |
270-2417 Seat Gp -Vinyl
| 01***41 | Setscrew-Socket | 3 |
| 27***17 | Seat Group; -Vinyl | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
138-7139 Steering Column Gp
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***47 | Tube As | 1 |
106-8541 Umbrella Gp
| 10***41 | Umbrella Group; -Bg-225c | 1 |
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
187-6649 Umbrella Gp
| 18***49 | Umbrella Group; -Ap-650b | 1 |
| 28***79 | Bar-Side | 208 |
| 28***80 | Foam Insulation; 40 X 60 X 644 mm, Bar-Side | 104 |
Power Train
128-2482 Filter Gp-Oil -Propel
| 11***04 | Conveyor Group-Drag | 2 |
| 11***06 | Guard Group-Feeder | 1 |
| 12***02 | Footshaft Group | 2 |
115-2276 Lines Gp-Propel
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 2 |
| 06***66 | Bolt; (3/4-10x1.642-In) | 6 |
| 10***55 | Plate | 1 |
105-8883 Planetary Gp-Final Drive
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 2 |
| 06***66 | Bolt; (3/4-10x1.642-In) | 6 |
| 10***55 | Plate | 1 |
Service Equipment And Supplies
241-6103 Finish Ar -Ap-650b
| 24***03 | Finish Ar; -Ap-650b | 1 |
262-0815 Finish Ar -Bg-225c
| 26***15 | Finish Ar; -Bg-225c | 1 |
7r-4741 Lines Gp-Spray Down
| 7R***41 | Lines Group-Spray Down | 1 |
254-0057 Plate & Film Gp
| 25***57 | Plate & Film Group | 1 |
257-4397 Plate & Film Gp -Ap-650b
| 25***97 | Plate & Film Group; -Ap-650b | 1 |
239-1133 Plate & Film Gp -French
| 23***33 | Plate & Film Group; -French | 1 |
229-6241 Plate & Film Gp -French
| 22***41 | Plate & Film Group; -French | 1 |
229-6242 Plate & Film Gp -English
| 22***42 | Plate & Film Group; -English | 1 |
229-6239 Plate & Film Gp -English
| 22***39 | Plate & Film Group; -English | 1 |
262-0816 Plate & Film Gp -Bg-225c
| 26***16 | Plate & Film Group; -Bg-225c | 1 |
149-7394 Reel Gp-Washdown Hose
| 14***94 | Reel Group-Washdown Hose | 1 |
087-0889 Reel Gp-Washdown Hose
| 08***89 | Reel Group-Washdown Hose | 1 |
Slope And Grade Control
119-1765 Beam Gp-Transverse
| 11***65 | Beam Group-Transverse | 1 |
| 13***89 | Support As; (Sensor) | 1 |
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 10 |
168-6500 Cable Gp-Control -Grade
| 13***84 | Plate As | 2 |
| 13***85 | Mount As | 2 |
| 13***87 | Plate | 2 |
209-3130 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
239-2367 Control Gp-Grade & Slope
| 12***95 | Sensor Group-Grade; -Sonic | 1 |
| 13***83 | Cable As | 1 |
| 23***67 | Control Group-Grade & Slope | 1 |
130-7054 Control Gp-Grade & Slope
| 11***93 | Bracket | 1 |
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 13***54 | Control Group-Grade & Slope | 1 |
207-8265 Control Gp-Grade & Slope
| 11***29 | Cap-Dust | 1 |
| 14***16 | Faceplate | 1 |
| 14***17 | Bracket | 1 |
206-6727 Control Gp-Grade & Slope
| 12***94 | Sensor Group-Grade | 1 |
| 12***99 | Arm-Follower | 1 |
| 13***83 | Cable As | 1 |
168-5031 Control Gp-Grade & Slope
| 11***93 | Bracket | 1 |
| 12***91 | Sensor Group-Sonic; -Grade | 1 |
| 16***31 | Control Group-Grade & Slope | 1 |
209-3128 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
122-0348 Mounting Gp-Control -Premier Control System
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
106-9676 Mounting Gp-Control -Grade Sensor
| 10***76 | Mounting Group-Control; -Grade Sensor | 1 |
| 17***32 | Film-Identification; (Tow Point Indicator) | 2 |
| 20***40 | Plate | 2 |
185-4061 Sensor Ar-Grade -Premier Control System
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
185-4064 Sensor Ar-Grade -Premier Control System
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***29 | Shoe As | 4 |
209-3132 Sensor Gp-Grade -Averaging Ski
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***04 | Tube; (1.1-M) | 1 |
122-0095 Sensor Gp-Grade -Sonic
| 08***09 | Bracket | 7 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
122-0094 Sensor Gp-Grade
| 08***09 | Bracket | 7 |
| 08***11 | Shoe-Pan | 1 |
| 08***38 | Channel | 2 |
209-3131 Sensor Gp-Grade -Sonic
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***29 | Shoe As | 4 |
122-0090 Sensor Gp-Grade -Averaging Ski
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
122-0091 Sensor Gp-Sonic -Grade
| 10***04 | Tube; (1.1-M) | 1 |
| 10***34 | Tube As | 1 |
| 10***49 | Collar | 2 |
Undercarriage
115-2294 Bogie Gp
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 11***94 | Bogie Group | 1 |
| 21***57 | Seal Group-Duo-Cone | 2 |
115-2293 Bogie Gp-Rear
| 11***93 | Bogie Group-Rear | 1 |
| 21***56 | Ring-Toric | 2 |
| 21***57 | Seal Group-Duo-Cone | 2 |
115-2292 Bogie Gp-Rear
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 5 |
| 11***92 | Bogie Group-Rear | 1 |
| 17***60 | Roller As | 1 |
115-2291 Drive Gp-Track
| 11***91 | Drive Group-Track | 3 |
| 11***92 | Bogie Group-Rear | 1 |
| 11***93 | Bogie Group-Rear | 1 |
115-2296 Idler Gp-Front
| 10***51 | Harness As-Screed; (Extension) | 1 |
| 11***96 | Idler Group-Front | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 5 |
222-2265 Link As-Track
| 10***52 | Harness As-Screed; (Extension) | 1 |
| 22***65 | Link As-Track | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 8 |
239-2366 Mounting Gp-Averaging Ski
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 21***53 | Extension Group-Main Frame | 4 |
| 23***66 | Mounting Group-Averaging Ski | 1 |
231-3079 Roller Gp-Track -Single Flange
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 2 |
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 21***53 | Extension Group-Main Frame | 1 |
115-2295 Roller Gp-Track Carrier
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 10***15 | Extension Group-Main Frame; -2 Ft | 2 |
| 11***95 | Roller Group-Track Carrier | 1 |
6s-3609 Roller Gp-Track Carrier
| 10***83 | Extension Ar; -Diesel Heat, 28-In | 2 |
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 11***09 | Bearing Group-Auger | 2 |
281-8339 Roller Gp-Track-Single Flange
| 10***14 | Extension Group-Main Frame; -1 Ft | 4 |
| 11***09 | Bearing Group-Auger | 2 |
| 16***71 | Support Group-Frame | 2 |
115-2297 Track Gp
| 10***14 | Extension Group-Main Frame; -1 Ft | 2 |
| 10***15 | Extension Group-Main Frame; -2 Ft | 2 |
| 11***97 | Track Group | 1 |
115-2290 Undercarriage Ar
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
AP-650B serial number reference
The PIN/serial plate on the AP-650B is a riveted metal tag mounted on the main frame near the engine compartment or operator's platform, the same general location Caterpillar uses across its asphalt paver line. The prefix is the first three characters of the serial number (letter-letter-letter or letter-digit-letter), stamped before the running unit number, e.g. 9DN00458. Read the three-character prefix off the plate and match it against the machine's parts catalog breakout to confirm engine and configuration.
| Prefix | Identifies | Notes |
|---|---|---|
| 5GN | Earliest production block, dual-badged Caterpillar AP-650B / Barber-Greene BG-225C | Powered by the naturally aspirated 3054 engine. Tied directly to AP-650B/BG-225C parts-catalog breakouts (5GN00001-UP) covering undercarriage, hydraulics, and slope-and-grade control. Sale listings place these units around 1998. |
| 9DN | Early-to-mid production block, dual-badged AP-650B / BG-225C | Also powered by the 3054 engine. Widely documented across sale and auction listings from 1999 through the mid-2000s, so treat the production window as approximate rather than a hard cutoff. |
| A7P | Later production block | Powered by the updated 3054C engine. Tied directly to an AP-650B/BG-225C parts-catalog breakout (A7P00001-UP) for frame-and-body components. Sale listings place these units around 2004. |
| B6G | Latest production block | Grouped with A7P in the screed-extension attachment fitment note (covers B6G1-UP and A7P1-UP together), pointing to the same 3054C-powered generation as A7P. No standalone sale listing found for this prefix; confirm exact production dates and configuration with a dealer. |
Frequently asked questions
What engine does the Caterpillar AP-650B use?
A Cat 3054 series four-cylinder turbocharged diesel, built across the production run as the 3054 and later 3054C, rated at roughly 121 hp (90 kW) gross.
What is the operating weight of the AP-650B?
Roughly 11.8 t (26,000 lb) for the bare chassis without screed, up to about 16.3 t (35,950 lb) with an Extend-A-Mat screed fitted. Exact figure varies by screed and configuration.
What replaced the Caterpillar AP-650B?
Cat moved this size and track class forward to the AP-655 family, first as the AP-655D and later as the letter-suffix-dropped current AP655, which carries the same mid-size track paver role today.
What AP-650B owners discuss
What's the most common complaint about AP-650B tracking/steering in the field?
Operators report the paver pulling or veering to one side while propelling forward, but tracking straight in reverse. Community diagnosis starts with the propel system: check the electric displacement control (EDC) coils on the propel pumps for a side-to-side calibration mismatch, then inspect the directional control valve for uneven hydraulic pressure and the steering linkage/cylinders for wear or seeping seals. A drifted propulsion controller calibration is also a known cause and usually needs a dealer laptop session to recheck rather than a wrench fix. Have your dealer verify propel pump EDC balance and directional valve pressures before returning the machine to production paving.
What undercarriage wear pattern is typical for this machine?
The AP-650B rides on a steel track undercarriage adapted from Cat D3-class dozer running gear, so wear shows up in the same places as a small dozer: front idler and rear drive sprocket teeth wearing unevenly when track tension isn't kept equal side to side, and track shoe mounting bolts loosening under the repeated shock of curb-and-gutter or cold-mix work. Owners say to renew sprockets at the same time as a worn track chain rather than bolting new track onto a worn sprocket, since the mismatch accelerates wear on the new set. Rubber-pad track options wear the pad rubber first, especially with tight-radius pivoting in driveway and parking-lot work; that is normal wear, not a defect.
What engine quirks show up on the AP-650B specifically?
The AP-650B is powered by the Cat 3054C turbocharged 4-cylinder diesel (roughly 90 kW / 121 gross hp, about 4.0 L / 244 cu in displacement), mounted transverse in the chassis for cooling airflow and service access. It is rated to pull full power without derate up to roughly 2,134 m (7,000 ft), so altitude-related power complaints are uncommon on this machine. The mechanical rotary injection pump is described as adjustment-free in normal service, but rough running, white smoke, or hard starting on higher-hour units usually traces to injection pump timing drift or an O-ring leak at the pump rather than the injectors themselves. Recheck pump timing against the flywheel marks before condemning injectors.
What electrical or sensor issues come up most in service?
Two complaints repeat often. First, the ultrasonic grade-and-slope sensors (ski or averaging-beam mount) throw false elevation readings when steam off fresh mat, dust, or a low obstruction bounces the sonic pulse back early; cleaning the transducer face and rechecking mounting height clears most of these with no parts replaced. Second, on the heated screed, a single heating element failing with hours in service is common and the heat control system compensates automatically so paving can continue; but a cluster of failed elements or a heater bank that won't reach temperature at all usually points to a tripped breaker, a corroded heater harness connector, or a bad heat control relay rather than the elements themselves.
Do owners report any hydraulic warm-up quirk on cold starts?
Yes. On cold mornings several owners note the screed leveling cylinders and propel response feel soft or laggy for the first several minutes until the hydraulic oil reaches operating temperature. That is typical cold-oil behavior for this pump and valve arrangement, not a leak or valve fault. If the lag persists well after the machine is fully warmed up, treat it as a real symptom (possible worn pump or a relief valve creeping open) rather than cold-oil behavior. Have your dealer verify pump output and relief valve settings if the softness doesn't clear with warm-up.
Does uneven mat thickness usually trace back to the screed or somewhere else?
Experienced crews say to check the feed system before blaming the screed. Auger flighting and conveyor chain wear, especially on units that ran a lot of recycled asphalt mix or ran the augers dry against the tunnel walls, shows up first as inconsistent mat thickness and only later as obvious noise or vibration at the feed system itself. An otherwise good screed can look like it's the problem when the real cause is uneven material delivery ahead of it.
What should a buyer check before purchasing a used Cat AP-650B?
Combine standard used-paver checks with items specific to this platform. Confirm the serial range and screed pairing match the listing, since this model shipped paired with the Extend-A-Mat B screed. Run the propel system both directions on flat ground and watch for the forward-veer complaint owners describe. Check track and sprocket wear plus shoe bolt tightness. Pull the screed cover and inspect heating elements, wiring, and leading-edge plate wear. Cycle the grade and slope sensors and confirm they hold a stable reading rather than just powering on. Check hydraulic hoses and the directional control valve for seepage, since leaks there are the most common source of hydraulic complaints on this class of machine. Have your dealer verify propel and steering hydraulic pressures and pull any stored fault codes before committing to a purchase price.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific AP-650B part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.