Caterpillarasphalt paver
Caterpillar AP-600D
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar AP-600D is a mid-size wheel-type asphalt paver, sized between the compact AP-200/AP300 class and the larger AP-1000 series. It runs the Cat C6.6 ACERT, a 6-cylinder turbocharged ATAAC diesel rated 129.5 kW/176 hp gross (121.9 kW/165.8 hp net) from 6.6 L displacement, built to meet EU Stage IIIA/EPA Tier 3 emissions. Operating weight runs about 18,200 kg (40,124 lb) as fitted with the AS4251C screed, with a 6.5 m3 hopper, paving width range of 2550-7000 mm, travel speed up to 18 km/h, and paving speed up to 25 m/min. Drive is hydrostatic to the wheels rather than through a mechanical differential axle. The line carries TFM and TFZ serial prefixes and belongs to a 2000s-era Tier 3 generation; the screed is offered with LPG or electric heat, fed by a tractor-mounted generator.
This D-suffix generation moved the AP-600 line to electronic engine control (ACERT) and added an Advisor display with service fault codes plus visual maintenance indicators, replacing the simpler mechanical gauges of earlier Tier 2 wheel pavers in the same size class. Caterpillar later dropped the D suffix and relaunched the line as a bare-name AP600/AP600F generation built around a different engine and serial-prefix set, so that later line is a separate parts catalog, not a direct one-for-one successor to the D-series. In the used and parts market, the AP-600D remains relevant because it shares its hydrostatic wheel-drive architecture and TFM/TFZ prefix scheme with contemporary Cat mid-size pavers, its Tier 3 diesel avoids the aftertreatment complexity of later Tier 4 machines, and a clear serial-prefix trail makes correct parts identification straightforward against contamination from the newer bare-name AP600 catalog.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar AP-600D specifications
Engine
| Engine model | Cat C6.6 with ACERT Technology, 6-cylinder turbocharged, air-to-air aftercooled (ATAAC) diesel |
| Gross power (SAE J1995) at 2200 rpm | 129.5 kW (176 hp) |
| Net power (ISO 9249 / EEC 80/1269) at 2200 rpm | 121.9 kW (165.8 hp) |
| Displacement | 6.6 L (403 cu in) |
| Bore x stroke | 105 mm x 127 mm (4.13 in x 5.00 in) |
| Cylinders | 6, in-line |
| Emissions | Meets EU Stage IIIA on EU-spec units; US-market AP600D units are EPA Tier 3 compliant. No earlier/later engine generation documented for this model designation — do not carry over 3056E data from the plain (non-D) AP600. |
Weights
| Operating weight, tractor with AS4251C screed | 18 200 kg (40 124 lb) — includes 75 kg (165 lb) operator, canopy, fuel tank at 50%, leveling system, standard-width screed (2.55-5 m) |
| Shipping weight, tractor only | 14 000 kg (30 865 lb) |
| Shipping weight, tractor with screed | 17 900 kg (39 463 lb) — canopy lowered, fuel tank at 10%, manual apron, standard screed end gates |
| Ground pressure | Not published. Front steering wheels ride in tandem on oscillating bogie axles to equalize ground contact, but no ground-pressure figure is given for this wheeled paver. |
Dimensions
| Tractor length with push roller | 4950 mm (16.24 ft / 194.9 in) |
| Overall length with push roller and screed | 6160 mm (20.2 ft / 242.5 in) — varies with screed width/extension configuration |
| Transport width, with screed end gates (hopper raised) | 2720 mm (8.92 ft / 107.1 in) |
| Transport width, without screed end gates (hopper raised) | 2500 mm (8.2 ft / 98.4 in) |
| Tractor operating width (hopper lowered) | 3306 mm (10.85 ft / 130.2 in) |
| Wheel gauge (front steering wheels) | 2200 mm (7.22 ft / 86.6 in) |
| Wheelbase | 2360 mm (7.74 ft / 92.9 in) |
| Operating height with canopy | 3840 mm (12.6 ft / 151.2 in) |
| Transport height, canopy/fumes stack/seat lowered | 3019 mm (9.9 ft / 118.9 in) |
| Ground clearance | 260 mm (10.2 in) |
| Truck dump height at hoppers | 520 mm (20.5 in) |
| Truck entry width at hoppers | 3200 mm (10.5 ft / 126 in) |
| Hopper length | 1960 mm (6.43 ft / 77.2 in) |
| Push roller height | 533 mm (21 in) |
| Drive tires | Two, 16.00 x 25 radial |
| Steering tires | Four, solid rubber, 559 mm x 330 mm (22 in x 13 in) |
Performance
| Paving speed | 0-25 m/min (0-82 ft/min) |
| Travel speed | 0-18 km/h (0-11.2 mph) |
| Turning radius, maneuver mode | 1.4 m (4.6 ft) minimum — three propel modes (pave, travel, maneuver); maneuver mode gives full steering range and pivot-turn capability |
| Standard paving range, AS4251C screed | 2550-5000 mm (8.4-16.4 ft) |
| Maximum paving width, AS4251C screed (electric or LPG heat) | 7000 mm (23 ft) with mechanical extensions both sides |
| Hopper capacity (with conveyor tunnels) | 6.5 m3, 14.1 tonne rated |
| Auger diameter | 406 mm (16 in) |
| Gradeability | Not published for this model |
Service capacities (summary)
| Fuel tank | 291 L (76.9 US gal) |
| Hydraulic oil tank | 218 L (57.6 US gal) |
| Engine oil, with filter | 14 L (3.7 US gal) |
| Cooling system, total | 30 L (7.9 US gal) |
| Washdown spray system | 38 L (10.0 US gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
AP-600D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat C6.6 ACERT | 14 L (3.7 US gal) | Cat DEO-ULS or Cat DEO Multigrade diesel engine oil (meets Cat ECF-1-a/ECF-2/ECF-3). Standard grade SAE 15W-40. Multigrade 10W-30 suits -18 C to 40 C (0 F to 104 F). For cold climates use Cat DEO SYN (5W-40) down to -30 C (-22 F) or Cat Arctic DEO SYN (0W-30) down to -40 C (-40 F). Follow S.O.S oil analysis for drain interval. |
| Cooling system (total) | 30 L (7.9 US gal) | Cat ELC (Extended Life Coolant), premixed 1:1 water/glycol as standard fill. Minimum 30% glycol required, up to 60% glycol for extreme cold protection. Cat DEAC (Diesel Engine Antifreeze/Coolant) plus Cat SCA is the alternate full-formulation option; top off ELC systems only with ELC Extender, never mix coolant types. |
| Fuel tank | 291 L (76.9 US gal) | Ultra-low sulfur No. 2-D diesel fuel meeting ASTM D975 or EN 590. Blend with No. 1-D or use a winter-grade fuel below freezing ambient to keep cloud/pour point in check; use Cat fuel/water separator filtration as fitted. |
| Hydraulic system and tank (shared with hydrostatic wheel-drive circuit) | 218 L (57.6 US gal) | Cat HYDO Advanced 10 is the preferred fill (SAE 10W) for ambient -20 C to 40 C (-4 F to 104 F), giving extended 3000 hour standard drain (6000 hour with S.O.S monitoring). Second-choice oils: Cat HYDO, Cat MTO, Cat DEO, Cat DEO-ULS, Cat TDTO, Cat Arctic TDTO, Cat TDTO-TMS, Cat DEO SYN, Cat Arctic DEO SYN. Third choice: commercial oil meeting Cat ECF-1-a/ECF-2/ECF-3/TO-4/TO-4M with minimum 900 ppm zinc. Colder climates step down through SAE 0W-20/0W-30/0W-40/5W-30/5W-40 grades. No separate transmission, final-drive, or axle-differential fluid compartment is listed for this model - propulsion is hydrostatic through the wheel drive motors fed from this same hydraulic tank. |
| Ecological washdown spray system tank (optional equipment) | 38 L (10.0 US gal) | Clean water fill only, not a lubricated compartment; no oil specification applies. |
| Grease (all fittings, spec only) | Not specified as a fill volume - service per grease point | Cat Multipurpose Grease (NLGI 2, lithium complex) for standard chassis and pivot fittings. Use Cat Advanced 3Moly Grease at high-load screed, apron, and leveling-arm pin/bushing points. In sustained sub-zero climates step down to a softer NLGI 0/1 arctic-grade grease for easier gun feed. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar AP-600D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the AP-600D beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S sampling on the C6.6 ACERT engine oil, hydrostatic wheel-drive oil, and auger gearbox oil to catch wear trends before failure. Because asphalt dust loads the hydraulic system harder than typical earthmoving duty, trend hydraulic oil cleanliness and cooler core condition closely. Use the Advisor display's service fault codes to flag hydrostatic pump/motor wear or engine derates early, and verify ELC coolant concentration on schedule rather than by appearance alone.
Corrective & Common Repairs
Expect auger and conveyor chain stretch and sprocket wear from abrasive mix contact, plus screed heater faults: fouled LPG burner nozzles or burned-out electric elements. Hydrostatic wheel-drive motor shaft seals are a common leak point, and main frame leveling cylinders can drift with age, affecting mat thickness control. Plugged hydraulic oil cooler cores from baked-on asphalt dust are a frequent cause of overheating complaints on this machine.
Overhaul & Rebuild Points
At major hour milestones, flow-test the hydrostatic drive pump and motor and rebuild or exchange units showing internal wear rather than waiting for a stall. Auger gearbox bearings and seals, screed extension slide wear plates, and tamper bar wear components are the other recurring rebuild items. C6.6 ACERT turbocharger and injector condition should be checked at these same intervals, along with wheel bearing and final drive wear on the hydrostatic drive wheels.
Seasonal & Environment Servicing
Before cold-weather paving, confirm coolant protection, hydrostatic oil viscosity grade, and full warm-up of the screed heater (LPG or electric) before the first pass to avoid mat tearing. In hot, dusty conditions, clean hydraulic and engine cooling cores of baked asphalt dust more often and shorten air filter service intervals. At end of season, drain the fuel water separator, protect exposed hydraulic cylinder rods, and grease all points before storing the machine idle.
AP-600D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 299-8229 | Filter-Fuel | Fuel system service | Check fitment → |
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 256-7902 | Filter Element As-Air | Air intake service | Check fitment → |
| 256-7903 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
AP-600D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 100 FMI 01 | Engine oil pressure low | Low oil level, worn oil pump, plugged filter, or wrong oil viscosity | Check oil level and filter condition, confirm actual pressure with a mechanical gauge before condemning the sensor |
| CID 100 FMI 03 | Engine oil pressure sensor circuit voltage above normal | Open circuit, chafed harness, or failed sensor | Inspect sensor connector and wiring for opens or corrosion, replace sensor if wiring tests good |
| CID 100 FMI 04 | Engine oil pressure sensor circuit voltage below normal | Shorted sensor wiring or failed sensor | Inspect wiring for a short to ground, test sensor resistance, replace as needed |
| CID 110 FMI 00 | Engine coolant temperature above normal (high coolant temp warning) | Low coolant, blocked radiator core, slipping or failed fan drive, or thermostat stuck closed | Check coolant level and radiator core for blockage, confirm fan drive engagement, verify thermostat operation |
| CID 110 FMI 03/04 | Engine coolant temperature sensor circuit voltage high or low | Damaged sensor wiring, corroded connector, or failed sensor | Inspect connector and harness, check sensor resistance against spec, replace sensor if out of range |
| CID 190 | Engine speed/timing sensor signal abnormal | Incorrect sensor air gap, damaged timing sensor, or wiring fault | Check sensor mounting and air gap, inspect connector and harness, replace sensor if faulty |
| CID 168 | Electrical system (battery) voltage out of normal range | Weak battery, loose or corroded connections, or charging system fault | Test battery state of charge and connections, check alternator output and drive belt condition |
| CID 102 | Boost/intake manifold pressure sensor signal abnormal or out of range | Boost leak, plugged or pinched sense line, or failed sensor | Inspect turbo boost piping and sense line for leaks or blockage, check sensor wiring and connector |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
AP-600D attachments & work tools
Primary screed
The AP-600D pairs with the AS4251C double-width hydraulic power-extendible screed. Standard paving range runs about 2.55-5.0 m, with hydraulic extension out to roughly 7-8 m depending on configuration and added bolt-on sections.
Screed compaction system
Combined vibratory and tamper-bar compaction, with variable-frequency control over both tamper and vibrator to tune density and mat texture for the mix and lift being laid.
Screed heating
Electric or LPG-fired heating for the smoothing plates, with independent automatic thermostatic control for the main plate and each extension plate to reach paving temperature quickly.
Bolt-on screed extensions
Beyond the hydraulic power-extending mainframe, the heavy-duty screed frame accepts bolt-on extension sections for extra-wide paving passes; extenders mount front or rear depending on the screed setup chosen.
Auger system
Hydraulically adjustable, extendible auger with reversible operation that pulls mix back into the tunnel when extenders retract, limiting spillage and segregation at the ends of the pass.
Conveyor / material feed
Independent, outboard-mounted conveyor drives (motors, reducers, chains) run gateless and full of mix; keeping both conveyor runs close together ahead of the auger cuts segregation.
Grade and slope control
Wiring supports 2- or 4-sensor grade control setups using sonic or mechanical (averaging ski/beam) sensors, compatible with Cat's automatic grade control system for string-line or reference-grade work.
Operator canopy
Optional full-width folding canopy with two side-extending wings, mounted over the operator station for sun and weather protection; folds down for transport.
All AP-600D assemblies by section
Every catalogued assembly group for the Caterpillar AP-600D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
270-8357 Air Cleaner Gp
| 21***81 | Cover As | 1 |
| 22***63 | Valve As-Air | 1 |
| 25***02 | Filter Element As-Air; (Primary) | 1 |
270-4254 Air Cleaner Gp
| 06***93 | Clamp-Tubing | 1 |
| 10***05 | Elbow; (90 Degree) | 1 |
| 14***11 | Adapter-Filter | 1 |
270-4255 Exhaust Gp-Flexible
| 06***93 | Clamp-Tubing | 2 |
| 13***49 | Cable As | 2 |
| 24***93 | Muffler | 1 |
288-3582 Manifold Gp-Inlet
| 23***88 | Gasket-Inlet | 1 |
| 27***02 | Dowel | 2 |
| 27***74 | Elbow As-Air Inlet | 1 |
285-3414 Turbocharger Gp
| 03***47 | Ferrule | 3 |
| 03***14 | Nut; (7/16-In) | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
Basic Engine
279-8837 Camshaft Gp
| 1B***36 | Key-Woodruff | 1 |
| 27***25 | Tappet | 12 |
| 27***26 | Rod-Push | 12 |
282-2827 Cover Gp-Cylinder Block
| 22***22 | Plug-Cup | 1 |
| 27***74 | Plate As-Blk | 1 |
| 27***75 | Seal-O-Ring | 1 |
277-4224 Cover Gp-Engine
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 27***23 | Plug | 1 |
282-2825 Cover Gp-Valve Mechanism
| 03***20 | Clip | 2 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 12***81 | Clip | 1 |
279-8762 Crankshaft Gp
| 1B***36 | Key-Woodruff | 1 |
| 22***39 | Dowel | 1 |
| 27***88 | Kit-Bearing; (Crankshaft, Main) | 1 |
279-8711 Cylinder Block Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 5 |
| 10***41 | Bolt; (M6x1x10-mm) | 6 |
| 18***84 | Dowel | 2 |
276-8115 Cylinder Head As
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 27***15 | Cylinder Head As | 1 |
309-6663 Cylinder Head As
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 27***16 | Plug-Core | 6 |
279-8821 Cylinder Head Gp
| 17***41 | Head-Gasket | 1 |
| 27***34 | Bolt-Special; (Cylinder Head) | 14 |
| 27***21 | Cylinder Head Group | 1 |
291-2513 Drain Gp-Engine Oil
| 27***83 | Seal; (Sump Drain Plug) | 1 |
| 29***13 | Drain Group-Engine Oil | 1 |
| 7C***51 | Plug-Drain; (Engine Oil) | 1 |
270-4259 Drain Gp-Engine Oil
| 15***55 | Adapter | 1 |
| 16***35 | Plug As | 1 |
| 20***28 | Hose As | 1 |
289-3265 Drive Gp-Fan
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 28***26 | Pulley | 1 |
| 28***60 | Belt-Serpentine | 1 |
285-2000 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 12 |
| 10***31 | Flywheel As | 1 |
284-0892 Housing Gp-Flywheel
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 19***09 | Plug | 1 |
277-3014 Housing Gp-Front
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
279-9653 Lifting Gp-Engine
| 27***51 | Plate-Lifting | 1 |
| 27***52 | Plate-Lifting | 1 |
| 27***53 | Lifting Group-Engine | 1 |
300-4431 Mounting Gp-Engine
| 27***90 | Bracket-Mounting | 2 |
| 28***01 | Bolt | 2 |
| 28***02 | Bolt | 6 |
270-4250 Mounting Gp-Engine Flexible
| 15***12 | Mount As | 2 |
| 23***44 | Support As | 1 |
| 23***45 | Support As | 1 |
300-4439 Pan Gp-Oil
| 10***90 | Plug | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 27***83 | Seal; (Sump Drain Plug) | 1 |
279-8780 Piston & Rod Gp
| 12***36 | Ring-Retaining | 2 |
| 22***39 | Bolt-Special; (Connecting Rod) | 2 |
| 27***75 | Piston As | 6 |
277-5007 Plug Gp-Engine
| 27***07 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
291-4135 Pulley Gp-Crankshaft
| 27***30 | Damper | 1 |
| 27***31 | Pulley | 1 |
| 27***32 | Hub | 1 |
291-4136 Pulley Gp-Fan
| 27***31 | Pulley | 1 |
| 29***36 | Pulley Group-Fan | 1 |
| 29***47 | Adaptor | 1 |
280-1911 Rocker Arm Gp
| 27***00 | Plug-Shaft End | 1 |
| 27***01 | Circlip | 1 |
| 27***06 | Spring-Shaft | 5 |
279-8825 Valve Mechanism Gp
| 27***27 | Link | 12 |
| 27***25 | Valve Mechanism Group | 1 |
| 28***11 | Rocker Arm Group | 1 |
Braking System
193-8539 Pump & Valve Gp-Brake -Manual Release
| 19***39 | Pump & Valve Group-Brake; -Manual Release | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 0 |
229-9476 Pump Gp-Hand -Brake Release
| 22***15 | Kit-Seal; (Check Valve)(Manual Brake Release Hand Pump) | 1 |
| 22***76 | Pump Group-Hand; -Manual Brake Release | 1 |
| 23***43 | Knob | 1 |
Controls
320-3019 Adjuster Gp-Height
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 1 |
| 17***11 | Locknut; (M16x2-Thd) | 1 |
| 21***21 | Locknut | 2 |
320-3021 Adjuster Gp-Height
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 1 |
| 17***11 | Locknut; (M16x2-Thd) | 1 |
| 21***21 | Locknut | 2 |
250-3368 Adjuster Gp-Manual
| 24***58 | Plate-Gauge | 4 |
| 25***68 | Adjuster Group-Manual | 1 |
| 32***19 | Adjuster Group-Height; -Rh | 2 |
242-2785 Adjuster Gp-Manual -Gate
| 24***58 | Tube As | 1 |
| 24***73 | Tube As | 1 |
| 24***77 | Tube As | 1 |
299-7235 Crown Gp-Power
| 10***41 | Locknut-Bearing; (M30x1.5-Thd) | 4 |
| 17***35 | Ring-Retaining | 2 |
| 24***10 | Stopper-Rubber | 1 |
242-2781 Crown Gp-Power
| 20***55 | Nut; (M20x1.5-Thd) | 2 |
| 24***20 | Nut; (M20x1.5-Thd, Lh) | 2 |
| 24***62 | Gear As; (15-Teeth) | 2 |
276-5635 Universal Joint Gp
| 27***35 | Universal Joint Group | 1 |
Cooling System
281-8748 Connection Gp-Water
| 10***87 | Bolt; (M10x1.5x85-mm) | 1 |
| 12***99 | Bolt; (M10x1.5x40-mm) | 1 |
| 28***44 | Gasket-Water Regulator; (Temperature) | 1 |
326-7401 Cooler Gp-Engine Oil
| 27***00 | Gasket-Housing | 1 |
| 28***39 | Cooler-Oil; (Engine) | 1 |
| 28***40 | Gasket | 1 |
281-7381 Cooler Gp-Engine Oil
| 22***44 | Gasket; (Engine Oil Filter Base) | 3 |
| 23***51 | Plate; (Blanking) | 2 |
| 27***38 | Gasket | 2 |
277-2939 Pump Gp-Water
| 11***29 | Bolt; (M8x1.25x75-mm) | 7 |
| 22***38 | Seal-O-Ring | 1 |
| 22***19 | Gasket | 1 |
270-4257 Radiator & Hyd Oil Cooler Gp
| 00***64 | End; (Hose) | 1 |
| 00***70 | Tee-Pipe | 1 |
| 03***39 | Connector | 1 |
333-7770 Radiator & Hyd Oil Cooler Gp
| 31***15 | Radiator As | 1 |
| 31***16 | Cooler As-Oil; (Hydraulic) | 1 |
| 33***70 | Radiator & Hydraulic Oil Cooler Group | 1 |
Electrical And Starting System
3e-6328 Alarm Gp -24-Volt
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
285-3080 Alternator Gp-Charging
| 10***51 | Bolt; (M8x1.25x130-mm) | 1 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 1 |
| 14***83 | Bolt; (M10x1.5x45-mm)(Starter Motor) | 2 |
269-8366 Battery & Wiring Gp
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 10***03 | Plate-Cover | 7 |
| 10***00 | Terminal As-Battery; (Remote Jump Start, Positive) | 1 |
306-6666 Box Gp-Control
| 27***66 | Board-Control | 1 |
| 27***65 | Connector | 8 |
| 27***54 | Box-Control | 8 |
288-1013 Box Gp-Control
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
| 27***74 | Box; (Lh) | 1 |
266-3171 Box Gp-Control -Burner
| 26***06 | Cable As-Coiled | 2 |
| 26***71 | Box Group-Control; -Burner | 1 |
| 27***62 | Connector; (Spark Plug) | 1 |
289-5816 Box Gp-Junction
| 28***16 | Box Group-Junction | 1 |
| 29***80 | Terminal | 1 |
| 30***01 | Terminal | 10 |
295-9766 Box Gp-Relay
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 11***18 | Clip | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 1 |
307-9160 Control & Mtg Gp-Machine
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 27***61 | Control Group-Burner | 1 |
| 30***60 | Name-Plate (Caution), Control & Mtg Group-Machine | 1 |
269-3838 Electrical Ar
| 26***38 | Electrical Ar | 1 |
| 26***66 | Battery & Wiring Group | 1 |
| 26***71 | Wiring Group-Power Train | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
| 32***76 | Software Group-Communication; (Product Link 300) | 1 |
| 32***77 | Service Group-Communication; (Product Link 300) | 1 |
316-2543 Electronics Gp-Machine -Operator Control
| 31***43 | Electronics Group-Machine; -Operator Control | 1 |
| 32***19 | Software Group-Machine; (Master Operator Station Ecm) | 1 |
| 32***20 | Service Group-Machine; (Master Operator Station Ecm) | 1 |
316-2544 Electronics Gp-Machine
| 31***44 | Electronics Group-Machine | 1 |
| 32***59 | Software Group-Machine | 1 |
| 32***60 | Service Group-Machine | 1 |
316-3351 Electronics Gp-Monitor
| 31***51 | Electronics Group-Monitor | 1 |
| 32***83 | Software Group-Monitor | 1 |
| 32***84 | Service Group-Monitor | 1 |
303-2133 Fastener Gp-Wiring Harness
| 21***99 | Clamp-Half | 2 |
| 30***33 | Fastener Group-Wiring Harness | 1 |
| 8T***34 | Bolt-Socket Head; (M6x1x50-mm) | 2 |
270-5315 Generator Gp
| 14***11 | Plug Group | 1 |
| 16***80 | Plug As. | 1 |
| 16***16 | Plug As | 1 |
289-5220 Generator Gp -Hydraulic
| 23***32 | Generator Group | 1 |
| 27***63 | Plate | 1 |
| 28***20 | Generator Group; -Hydraulic | 1 |
277-4410 Glow Plug Gp
| 10***38 | Bolt; (M6x20-mm) | 1 |
| 27***28 | Insulator | 1 |
| 27***07 | Bar As | 1 |
294-8412 Harness As-Engine
| 21***39 | Strap-Cable | 4 |
| 26***41 | Harness As-Engine | 1 |
| 27***09 | Bracket | 1 |
311-6865 Installation Gp-Communication
283-8145 Lamp Gp-Flood -24-Volt, 35-Watt, Hid-Cab Guard
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 15***54 | Bolt; (M10x1.5x40-mm) | 1 |
| 22***74 | Bezel; (Hid) | 1 |
234-4323 Lamp Gp-Flood -Low Beam
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***23 | Lamp Group-Flood; -Vertical Mount | 1 |
238-2797 Lamp Gp-Head & Signal -24-Volt, Rh
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
238-2798 Lamp Gp-Head & Signal -Lh
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
259-0134 Lamp Gp-Registration Plate -24-Volt
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***34 | Lamp Group-Registration Plate; -European Market | 1 |
252-7165 Lamp Gp-Signal -24-Volt
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 25***65 | Lamp Group-Signal; -24-Volt | 1 |
291-3698 Lamp Gp-Signal -Rh
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 29***98 | Lamp Group-Signal; -Rh | 1 |
| 2U***22 | Bulb (Indicator) 24v 21w Scc | 1 |
235-3937 Lamp Gp-Warning Beacon -24-Volt, Amber
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***37 | Lamp Group-Warning Beacon; -Amber, Rotating | 1 |
290-6022 Lighting Gp-Flood
| 13***00 | Clip; (Tab) | 4 |
| 28***45 | Lamp Group-Flood; -24-Volt, 35-Watt, Hid-Cab Guard | 4 |
| 29***21 | Harness As-Lighting; (Flood) | 1 |
288-6925 Lighting Gp-Flood
| 23***23 | Lamp Group-Flood; -Vertical Mount | 4 |
| 28***25 | Lighting Group-Flood | 1 |
| 29***39 | Harness As-Front Lighting | 2 |
276-1831 Lighting Gp-Roading
| 13***00 | Clip; (Tab) | 4 |
| 21***29 | Plug | 14 |
| 23***23 | Lamp Group-Flood; -Vertical Mount | 2 |
293-5354 Lighting Gp-Roading -Lh
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 29***54 | Lighting Group-Roading; -Lh | 1 |
| 2U***22 | Bulb (Indicator) 24v 21w Scc | 1 |
276-1832 Lighting Gp-Warning Beacon
| 23***55 | Bead-Ferrite | 2 |
| 23***37 | Lamp Group-Warning Beacon; -Amber, Rotating | 2 |
| 27***32 | Lighting Group-Warning Beacon | 1 |
299-7245 Motor Gp-Electric
| 25***48 | Gearbox | 1 |
| 29***39 | Motor-Electric | 1 |
| 29***45 | Motor Group-Electric | 1 |
258-6918 Mounting Gp-Sensor -Sonic Sensor
| 25***18 | Mounting Group-Sensor; -Sonic Sensor | 1 |
| 28***75 | Collar | 4 |
| 28***79 | Washer; (32.5x63.5x7.1-mm Thk) | 2 |
278-1591 Panel Gp-Circuit Breaker
| 11***18 | Clip | 3 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 2 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
292-7946 Panel Gp-Circuit Breaker
| 10***84 | Relay As; (24-Volt) | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 17***00 | Suppressor-Arc | 1 |
326-6194 Panel Gp-Circuit Breaker
| 11***18 | Clip | 3 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 2 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
| 32***74 | Software Group-Communication; (Product Link 121sr) | 1 |
198-8279 Sensor Gp-Auger
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 11***07 | Knob | 2 |
| 12***44 | Paddle As | 2 |
284-8876 Sensor Gp-Position
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 28***76 | Sensor Group-Position | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
278-3428 Sensor Gp-Position -4 Sensor
| 11***24 | Clamp | 4 |
| 16***41 | Support-Sensor | 2 |
| 19***38 | Sensor Group-Sonic; (Position) | 4 |
301-0071 Sensor Gp-Position -2 Sensor
| 11***24 | Clamp | 2 |
| 19***38 | Sensor Group-Sonic; (Position) | 2 |
| 1G***11 | Shaft-Governor Control | 2 |
195-8090 Sensor Gp-Position -Steering
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 19***90 | Sensor Group-Position; -Steering | 1 |
160-2443 Sensor Gp-Position -Rotary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
219-2385 Sensor Gp-Position -Auger
| 12***50 | Receptacle As | 1 |
| 12***51 | Bushing | 1 |
| 12***52 | Clamp As-Cable | 1 |
145-7028 Sensor Gp-Temperature -Hydraulic Oil Temp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***28 | Sensor Group-Temperature; -Hydraulic Oil Temp | 1 |
| 15***43 | Sleeve; (2.8-Dm) | 0 |
296-1288 Electronics Gp-Machine
| 29***88 | Software Group-Implement | 1 |
| 32***35 | Software Group-Machine | 1 |
| 33***58 | Service Group-Machine | 1 |
292-7884 Starting Motor Gp-Electric
| 10***78 | Bolt; (M10x1.5x55-mm) | 2 |
| 29***59 | Starting Motor-Electric | 1 |
| 29***60 | Bolt | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
172-8660 Switch Gp-Liquid Level -Hydraulic Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
175-2308 Switch Gp-Magnetic -24-Volt-Start Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
118-3534 Switch Gp-Magnetic -24-Volt
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
| 17***09 | Switch Group-Magnetic; -24-Volt-Start Relay | 1 |
175-2309 Switch Gp-Magnetic -24-Volt-Start Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***81 | Switch As-Magnetic; (Start Relay) | 1 |
167-0138 Switch Gp-Magnetic -24-Volt
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
165-5970 Switch Gp-Toggle -Fuel Priming Pump
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
299-7223 Wiring Gp-Crown
| 13***00 | Clip; (Tab) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 28***70 | Lock-Cable | 2 |
272-7061 Wiring Gp-Electronic Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 2 |
| 12***74 | Cover-Connector; (Wire Router) | 2 |
319-7155 Wiring Gp-Heater -Lpg Heat
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 30***66 | Air Intake Connection, Box Group-Control | 1 |
286-3633 Wiring Gp-Heater
| 11***18 | Clip | 31 |
| 13***00 | Clip; (Tab) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
304-9108 Wiring Gp-Heater -Lh
| 11***18 | Clip | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
304-9103 Wiring Gp-Heater -Lh
| 11***18 | Clip | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
| 13***00 | Clip; (Tab) | 6 |
304-9107 Wiring Gp-Heater -Rh
| 11***18 | Clip | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
| 13***00 | Clip; (Tab) | 9 |
304-9102 Wiring Gp-Heater -Rh
| 11***18 | Clip | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 2 |
| 13***00 | Clip; (Tab) | 6 |
307-9166 Wiring Gp-Heater
| 13***72 | Cover | 1 |
| 14***42 | Clamp | 2 |
| 23***97 | Conduit-Flexible; (16.2-mm Id)(445-cm) | 0 |
286-3632 Wiring Gp-Heater -Lpg Heat
| 11***18 | Clip | 6 |
| 13***89 | Clip; (Ladder) | 4 |
| 13***72 | Cover | 3 |
297-1002 Wiring Gp-Hydraulic Generator
| 13***00 | Clip; (Tab) | 1 |
| 29***02 | Wiring Group-Hydraulic Generator | 1 |
| 29***04 | Harness As-Solenoid | 1 |
292-0974 Wiring Gp-Machine -Lh
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***01 | Plate-Face | 2 |
| 13***00 | Clip; (Tab) | 4 |
272-7057 Wiring Gp-Machine -Rh
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***01 | Plate-Face | 1 |
272-7059 Wiring Gp-Machine -Rear
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 7 |
| 13***00 | Clip; (Tab) | 2 |
| 13***89 | Clip; (Ladder) | 1 |
299-5205 Wiring Gp-Panel -110-Vac
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 13***98 | Terminal As | 1 |
| 24***70 | Grommet | 1 |
299-5206 Wiring Gp-Panel -220-Vac
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 13***98 | Terminal As | 1 |
| 24***70 | Grommet | 1 |
269-8371 Wiring Gp-Power Train
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 13***00 | Clip; (Tab) | 1 |
| 13***01 | Clip | 5 |
289-5815 Wiring Gp-Screed
| 13***00 | Clip; (Tab) | 5 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 13***89 | Clip; (Ladder) | 3 |
306-6660 Wiring Gp-Screed -Extension, Rh
| 13***00 | Clip; (Tab) | 3 |
| 30***60 | Wiring Group-Screed; -Extension, Rh | 1 |
| 30***02 | Harness As-Heater; (Rh) | 1 |
304-9104 Wiring Gp-Screed
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 29***49 | Bracket | 2 |
| 30***70 | Harness As-Box; (Rh) | 1 |
293-5341 Wiring Gp-Screed -Rh
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***88 | Gasket-Connector | 1 |
| 15***98 | Screw-Button Head; (M3x0.5x1-mm) | 4 |
312-5016 Wiring Gp-Screed -Spark Plug, Main Screed, Rh
| 20***75 | Clamp-Half | 2 |
| 23***95 | Conduit-Flexible; (21.9-mm Id)(3353-cm) | 0 |
| 30***64 | Harness As-Wiring; (Screed) | 2 |
288-2631 Wiring Gp-Screed
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 4 |
| 28***31 | Wiring Group-Screed | 1 |
| 29***69 | Plate | 1 |
297-2488 Wiring Gp-Screed
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 29***88 | Wiring Group-Screed | 1 |
| 29***49 | Bracket | 2 |
291-3697 Wiring Gp-Screed -Lh
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***88 | Gasket-Connector | 1 |
| 15***98 | Screw-Button Head; (M3x0.5x1-mm) | 4 |
306-8868 Wiring Gp-Screed
| 30***60 | Wiring Group-Screed; -Extension, Rh | 1 |
| 30***61 | Wiring Group-Screed; -Extension, Lh | 1 |
| 30***68 | Wiring Group-Screed; -250-mm Extension | 1 |
312-5015 Wiring Gp-Screed -Spark Plug, Screed Ext, Lh
| 13***72 | Cover | 2 |
| 14***42 | Clamp | 4 |
| 23***95 | Conduit-Flexible; (21.9-mm Id)(3353-cm) | 0 |
312-5019 Wiring Gp-Screed -Spark Plug, Screed Ext, Rh
| 23***95 | Conduit-Flexible; (21.9-mm Id)(3353-cm) | 0 |
| 30***65 | Harness As-Wiring; (Spark Plug) | 2 |
| 31***19 | Wiring Group-Screed; -Spark Plug, Screed Ext, Rh | 1 |
312-5017 Wiring Gp-Screed -Spark Plug, Main Screed, Lh
| 13***72 | Cover | 3 |
| 14***42 | Clamp | 6 |
| 20***75 | Clamp-Half | 6 |
306-6661 Wiring Gp-Screed -Extension, Lh
| 13***00 | Clip; (Tab) | 3 |
| 30***61 | Wiring Group-Screed; -Extension, Lh | 1 |
| 30***03 | Harness As-Heater; (Lh) | 1 |
293-7187 Wiring Gp-Screed Heater -750-Mm Extension, Lh
| 11***18 | Clip | 2 |
| 13***00 | Clip; (Tab) | 4 |
| 28***16 | Box Group-Junction | 1 |
293-7258 Wiring Gp-Screed Heater -750-Mm Extension, Rh
| 11***18 | Clip | 2 |
| 13***00 | Clip; (Tab) | 4 |
| 28***16 | Box Group-Junction | 1 |
328-9591 Wiring Gp-Screed Heater -750-Mm Extension
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 29***87 | Wiring Group-Screed Heater; -750-mm Extension, Lh | 1 |
| 29***58 | Wiring Group-Screed Heater; -750-mm Extension, Rh | 1 |
319-7153 Wiring Gp-Screed Heater -250-Mm Extension, Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***18 | Clip | 4 |
| 31***53 | Wiring Group-Screed Heater; -250-mm Extension, Lh | 1 |
291-3691 Wiring Gp-Screed Heater -Lpg Heat-7-Meter, Extension
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 29***91 | Wiring Group-Screed Heater; -Lpg Heat-7-Meter, Extension | 1 |
| 29***49 | Bracket | 2 |
319-7152 Wiring Gp-Screed Heater -250-Mm Extension, Rh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***18 | Clip | 4 |
| 31***52 | Wiring Group-Screed Heater; -250-mm Extension, Rh | 1 |
291-3689 Wiring Gp-Screed Heater -Lpg Heat-8-Meter, Extension
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 29***89 | Wiring Group-Screed Heater; -Lpg Heat-8-Meter, Extension | 1 |
| 29***49 | Bracket | 2 |
306-8869 Wiring Gp-Screed Heater -250-Mm Extension
| 30***69 | Wiring Group-Screed Heater; -250-mm Extension, Cover | 1 |
| 31***52 | Wiring Group-Screed Heater; -250-mm Extension, Rh | 1 |
| 31***53 | Wiring Group-Screed Heater; -250-mm Extension, Lh | 1 |
Electrical System
288-6124 Box Gp-Screed Control
| 08***34 | Screw-Button Head | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 16***65 | Bolt-Socket Head; (M4x0.7x16-mm) | 4 |
288-6122 Box Gp-Screed Control -Rh
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
| 27***74 | Box; (Lh) | 1 |
288-6125 Box Gp-Screed Control -Lh
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
| 27***74 | Box; (Lh) | 1 |
286-5562 Box Gp-Screed Control -Rh
| 08***34 | Screw-Button Head | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
288-1014 Box Gp-Screed Control -Lh
| 08***34 | Screw-Button Head | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
274-1161 Control Gp-Burner
| 09***23 | Screw; (M3x0.5x10-mm) | 4 |
| 27***59 | Cabinet | 1 |
| 27***60 | Keypad As | 1 |
Engine Arrangement
242-1319 Engine Ar-Primary
| 24***19 | Engine Ar-Primary | 1 |
| 27***12 | Filter Group-Engine Oil; -Engine | 1 |
| 27***39 | Pump Group-Water | 1 |
262-4106 Installation Ar-Engine
| 24***19 | Engine Ar-Primary | 1 |
| 26***06 | Installation Ar-Engine | 1 |
| 27***50 | Mounting Group-Engine Flexible | 1 |
Feeder Drag And Auger Conveyors
263-6001 Auger Gp
| 10***55 | Plate | 1 |
| 16***89 | Bolt-Hex Head; (M16x2x55mm) | 4 |
| 17***24 | Bar | 2 |
201-5584 Bearing Gp-Auger
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
| 20***84 | Bearing Group-Auger | 1 |
116-9509 Bearing Gp-Auger
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***09 | Bearing Group-Auger | 1 |
106-9718 Bearing Gp-Auger
| 01***41 | Setscrew-Socket | 3 |
| 10***18 | Bearing Group-Auger | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
280-9921 Chain Gp-Conveyor
| 28***21 | Chain Group-Conveyor | 1 |
| 28***79 | Bar-Side | 232 |
| 28***80 | Foam Insulation; 40 X 60 X 644 mm, Bar-Side | 116 |
262-4105 Conveyor Ar-Drag & Auger
| 19***48 | Conveyor Group-Drag | 2 |
| 21***70 | Footshaft Group | 2 |
| 26***05 | Conveyor Ar-Drag & Auger | 1 |
191-4421 Conveyor Gp-Auger
| 10***85 | Plate | 2 |
| 10***91 | Pipe | 2 |
| 10***96 | Plate | 1 |
192-5448 Conveyor Gp-Drag
| 05***20 | Pin-Spring | 58 |
| 12***46 | Bar-Feeder | 29 |
| 19***48 | Conveyor Group-Drag | 1 |
263-6007 Door Gp-Access
| 10***56 | Rod; (Prop) | 3 |
| 11***77 | Bumper-Rubber | 4 |
| 12***27 | Spacer; (9x14x3.5-mm Thk) | 2 |
263-6000 Drive Gp-Conveyor
| 10***99 | Sprocket As; (12-Teeth) | 2 |
| 13***92 | Key-Square | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
231-3532 Extension Gp-Auger -6-In
| 23***32 | Extension Group-Auger; -6-In | 1 |
| 31***84 | Tube | 2 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 2 |
231-2043 Extension Gp-Auger -24-In, Lh
| 23***43 | Extension Group-Auger; -24-In, Lh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
198-8287 Extension Gp-Auger -12-In, Rh
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
231-2042 Extension Gp-Auger -24-In, Rh
| 23***42 | Extension Group-Auger; -24-In, Rh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
243-0329 Extension Gp-Auger -18-In
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 23***32 | Extension Group-Auger; -6-In | 1 |
199-4206 Extension Gp-Auger -12-In, Lh
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
215-1870 Footshaft Gp
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
263-6002 Guard Gp-Conveyor
| 12***54 | Screw-Flat Head; (M12x1.75x35-mm) | 64 |
| 19***39 | Plate | 4 |
| 19***40 | Plate | 2 |
269-7123 Hydraulic Ar-Conveyor
| 23***97 | Motor & Mtg Group-Auger | 1 |
| 26***23 | Hydraulic Ar-Conveyor | 1 |
| 27***14 | Pump & Mtg Group-Conveyor | 1 |
270-7215 Motor & Mtg Gp-Conveyor
| 11***80 | Elbow | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***58 | Elbow As | 2 |
191-4411 Planetary Gp-Auger
| 09***92 | Pin-Spring | 2 |
| 13***16 | Kit-Washer; (Planetary) | 1 |
| 13***30 | Plug-Magnetic; (Planetary) | 1 |
192-7962 Planetary Gp-Conveyor
| 09***92 | Pin-Spring | 2 |
| 19***62 | Planetary Group-Conveyor | 1 |
| 23***88 | Pin-Spring | 2 |
270-7214 Pump & Mtg Gp-Conveyor
| 08***56 | 90 Degrees Elbow | 1 |
| 14***27 | Connector Group | 2 |
| 14***39 | Connector As. | 8 |
263-6003 Shaft Gp-Feeder Drive
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 4 |
| 10***30 | Bearing-Flange | 2 |
| 10***70 | Key-Square | 2 |
Frame And Body
286-3634 Arm Gp-Drop
| 22***36 | Bolt; (M24x2x85-mm) | 2 |
| 25***53 | Washer; (25x55x8-mm Thk) | 2 |
| 27***48 | Pin | 2 |
328-9576 Arm Gp-Drop
| 22***36 | Bolt; (M24x2x85-mm) | 2 |
| 25***53 | Washer; (25x55x8-mm Thk) | 2 |
| 27***48 | Pin | 2 |
271-2815 Arm Gp-Tow
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 19***19 | Roller | 4 |
| 19***20 | Shaft | 2 |
316-1659 Ballast & Mounting Gp
| 31***59 | Ballast & Mounting Group; -2-Plate | 1 |
| 31***61 | Plate | 2 |
| 7X***75 | Bolt-Plt; (M16 X 2.0 X 130) | 4 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
315-1101 Brace Gp
| 1A***68 | Nut | 1 |
| 31***01 | Brace Group | 1 |
| 31***02 | Plate As | 1 |
282-8500 Bracket Gp-Support
| 12***73 | Extension As | 2 |
| 12***20 | Shim; (1.65-mm Thk) | 8 |
| 24***82 | Plate | 2 |
232-1107 Bracket Gp-Support
| 22***51 | Bracket | 1 |
| 23***07 | Bracket Group-Support | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
315-2358 Conversion Gp-Roading -Italy
| 10***16 | Cover-Work Light | 2 |
| 13***82 | Arm-Mirror | 2 |
| 13***83 | Mirror-Convex | 2 |
315-2359 Conversion Gp-Roading -Germany
| 10***49 | Reflector-Yellow | 8 |
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 13***82 | Arm-Mirror | 2 |
293-9898 Cover Gp-Access
| 10***14 | Knob | 3 |
| 19***64 | Plate | 2 |
| 20***04 | Plate | 2 |
295-2143 Cover Gp-Access
| 09***22 | Ring-Retaining | 8 |
| 24***04 | Handle | 1 |
| 29***43 | Cover Group-Access | 1 |
295-2114 Cover Gp-Access
| 09***22 | Ring-Retaining | 4 |
| 24***04 | Handle | 1 |
| 29***14 | Cover Group-Access | 1 |
272-2384 Cover Gp-Platform
| 27***43 | Cover | 2 |
| 27***84 | Cover Group-Platform | 1 |
| 9X***42 | Screw-Truss Head (M6x1.0x12mm); (M6x1.00x12mm) | 6 |
328-9585 Cover Gp-Screed
| 09***22 | Ring-Retaining | 4 |
| 11***33 | Washer; (11x50x6-mm Thk) | 8 |
| 13***73 | Screw-Flat Head; (M10x1.5x25-mm) | 4 |
286-3493 Cover Gp-Screed
| 09***49 | Bolt; (M8x1.25x40-mm) | 14 |
| 13***40 | Locknut; (M8x1.25-Thd) | 6 |
| 23***06 | Bumper | 1 |
250-3366 Deflector Gp
| 09***85 | Locknut; (M16x2-Thd) | 8 |
| 15***49 | Screw-Flat Head; (M10x1.5x25-mm) | 28 |
| 19***84 | Locknut; (M10x1.5-Thd) | 28 |
231-1982 Extension Gp-Main Frame -12-In
| 10***88 | Extension As | 1 |
| 23***82 | Extension Group-Main Frame; -12-In | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
215-7553 Extension Gp-Main Frame
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
231-1983 Extension Gp-Main Frame -24-In
| 10***90 | Extension As | 1 |
| 23***83 | Extension Group-Main Frame; -24-In | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
299-7236 Frame Gp-Main
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 09***85 | Locknut; (M16x2-Thd) | 2 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 4 |
265-6509 Fitting Gp-Grease
| 26***09 | Fitting Group-Grease | 1 |
| 27***27 | Fitting-Grease | 4 |
| 5W***17 | Fitting-Grease | 12 |
279-2579 Flashing Gp
| 26***82 | Flashing | 2 |
| 27***90 | Flashing | 2 |
| 27***42 | Plate | 2 |
279-2578 Flashing Gp
| 15***74 | Bolt-Round Head; (M12x1.75x60-mm) | 5 |
| 25***07 | Bolt-Round Head; (M12x1.75x65-mm) | 18 |
| 27***32 | Flashing | 2 |
293-9899 Frame Gp-Main
| 14***93 | Bolt; (M12x1.75x40-mm) | 8 |
| 27***37 | Angle As; (Lh) | 1 |
| 27***39 | Angle As; (Rh) | 1 |
295-2113 Frame Gp-Screed
| 09***85 | Locknut; (M16x2-Thd) | 4 |
| 13***82 | Bolt; (M16x2x100-mm) | 4 |
| 15***49 | Screw-Flat Head; (M10x1.5x25-mm) | 8 |
286-3490 Frame Gp-Screed
| 09***59 | Pin-Cotter | 4 |
| 09***19 | Ring-Retaining | 8 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
286-3491 Frame Gp-Screed -Rh
| 10***06 | Plate As | 3 |
| 15***86 | Plate As | 2 |
| 17***08 | Plate As | 2 |
286-3492 Frame Gp-Screed -Lh
| 15***86 | Plate As | 1 |
| 17***08 | Plate As | 3 |
| 28***92 | Frame Group-Screed; -Lh | 1 |
295-2142 Frame Gp-Screed
| 13***82 | Bolt; (M16x2x100-mm) | 8 |
| 15***49 | Screw-Flat Head; (M10x1.5x25-mm) | 16 |
| 19***83 | Nut; (M8x1.25-Thd) | 32 |
292-8814 Frame Gp-Sliding -Rh
| 17***08 | Plate As | 1 |
| 25***34 | Plate Group-Screed; -Sliding | 1 |
| 25***78 | Pin | 2 |
292-8813 Frame Gp-Sliding -Lh
| 17***08 | Plate As | 1 |
| 25***34 | Plate Group-Screed; -Sliding | 1 |
| 25***78 | Pin | 2 |
311-4480 Gate Gp-End
| 08***07 | Pin | 2 |
| 09***79 | Setscrew-Socket | 4 |
| 09***76 | Nut; (M14x2-Thd) | 2 |
311-4470 Gate Gp-End
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 17***11 | Locknut; (M16x2-Thd) | 4 |
273-9969 Guide Gp-Steering
| 16***06 | Rod | 1 |
| 19***54 | Chain | 1 |
| 27***69 | Guide Group-Steering | 1 |
278-8234 Hopper Gp
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 1 |
| 26***33 | Pin As | 1 |
| 27***32 | Plate As | 1 |
263-6004 Hopper Gp
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
| 16***85 | Pin As | 2 |
250-3370 Lines Gp-Grease
| 24***87 | Connector | 16 |
| 25***70 | Lines Group-Grease | 1 |
| 26***34 | Hose As-Grease | 10 |
273-7452 Lines Gp-Grease
| 14***20 | Connector As | 2 |
| 14***85 | Elbow; (45°) | 8 |
| 14***89 | Elbow As | 6 |
263-5961 Lock Gp-Transport
| 25***97 | Bar | 2 |
| 26***61 | Lock Group-Transport | 1 |
| 31***09 | Plate | 2 |
316-1660 Mounting Gp-Ballast
| 31***60 | Mounting Group-Ballast | 1 |
| 31***62 | Plate | 2 |
| 7X***56 | Bolt-Plt; (M16 X 2.0 X 100) | 4 |
270-8888 Plate & Heater Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
295-2111 Plate & Heater Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 22***38 | Sensor Group-Temperature; (Screed Heat) | 2 |
328-9579 Plate & Heater Gp-Screed
| 03***57 | Washer; (13x26x6-mm Thk) | 16 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
273-1160 Plate Gp
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 1 |
| 26***33 | Pin As | 1 |
| 27***45 | Bar | 1 |
310-9817 Plate Gp-Screed -Lh
| 09***22 | Ring-Retaining | 2 |
| 24***04 | Handle | 1 |
| 25***79 | Gate As | 1 |
251-0834 Plate Gp-Screed -Sliding
| 25***34 | Plate Group-Screed; -Sliding | 1 |
| 25***32 | Pad | 2 |
| 25***77 | Support As | 1 |
310-9816 Plate Gp-Screed -Rh
| 09***22 | Ring-Retaining | 2 |
| 24***04 | Handle | 1 |
| 25***79 | Gate As | 1 |
251-0819 Plate Gp-Screed -Gas
| 24***93 | Stud; (M12x1.75x100-mm) | 48 |
| 24***97 | Nut-Brass; (M12x1.75-Thd) | 96 |
| 24***04 | Nut-Brass; (M14x2-Thd) | 16 |
287-0269 Plate Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
300-3564 Step Gp
| 11***34 | Bracket As; (Rh) | 1 |
| 11***03 | Bracket As; (Lh) | 1 |
| 29***88 | Step As | 1 |
262-4108 Structural Ar
| 26***08 | Structural Ar | 1 |
| 26***61 | Lock Group-Transport | 1 |
| 27***15 | Arm Group-Tow | 1 |
231-1956 Support Gp-Frame
| 10***89 | Brace Group | 1 |
| 23***56 | Support Group-Frame | 1 |
| 23***07 | Bracket Group-Support | 1 |
263-6008 Suppression Gp-Sound
| 26***08 | Suppression Group-Sound | 1 |
| 27***51 | Insulation-Sound Suppression | 1 |
| 27***52 | Insulation-Sound Suppression | 1 |
270-6763 Ventilation Gp-Paver
| 12***96 | Seal; (1.084m) | 0 |
| 12***23 | Seal; (32-cm) | 0 |
| 14***00 | Inlet-Blower | 1 |
Fuel System
299-7255 Burner Gp
| 24***95 | Support As | 8 |
| 24***15 | Burner | 8 |
| 24***36 | Bolt; (M12x1.75x20-mm) | 16 |
250-9118 Burner Gp
| 24***93 | Stud; (M12x1.75x100-mm) | 8 |
| 24***95 | Support As | 2 |
| 24***97 | Nut-Brass; (M12x1.75-Thd) | 16 |
276-0079 Control Gp-Decelerator
| 26***48 | Pedal Group-Governor; -Electronic | 2 |
| 27***36 | Spacer | 2 |
| 27***79 | Control Group-Decelerator | 1 |
201-7654 Cover Gp-Fuel Tank
| 20***53 | Plate | 1 |
| 20***54 | Cover Group-Fuel Tank | 1 |
| 6V***98 | Bolt; (M5x0.8x16-mm) | 5 |
280-1394 Filter Gp-Secondary Fuel
| 28***94 | Filter Group-Secondary Fuel | 1 |
| 29***29 | Filter-Fuel; (Ultra High Efficiency)(Secondary) | 1 |
| 30***80 | .. Bushing, Filter Group-Fuel; (Ultra High Efficiency) | 1 |
174-9570 Filter Gp-Water Sep & Fuel -Primary
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 27***20 | Bowl As; (Fuel, Water Separator) | 1 |
268-6140 Fitting Gp-Fuel Lines
| 26***40 | Fitting Group-Fuel Lines | 1 |
| 26***41 | Block | 1 |
| 26***47 | Washer; (13x18x1.5-mm Thk) | 4 |
321-3600 Injector Gp-Fuel
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
| 32***00 | Injector Group-Fuel | 1 |
292-3780 Injector Gp-Fuel
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
| 29***80 | Injector Group-Fuel | 1 |
306-9380 Injector Gp-Fuel
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
| 30***80 | Injector Group-Fuel | 1 |
268-4206 Lines Gp-Burner
| 26***06 | Lines Group-Burner | 1 |
| 26***45 | Fitting; (Machined) | 8 |
| 26***47 | Washer; (13x18x1.5-mm Thk) | 12 |
286-3631 Lines Gp-Burner
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 15***50 | Elbow As | 1 |
| 26***40 | Fitting Group-Fuel Lines | 2 |
268-4205 Lines Gp-Burner
| 26***05 | Lines Group-Burner | 1 |
| 26***45 | Fitting; (Machined) | 4 |
| 26***47 | Washer; (13x18x1.5-mm Thk) | 6 |
295-2110 Lines Gp-Burner
| 26***45 | Fitting; (Machined) | 8 |
| 26***47 | Washer; (13x18x1.5-mm Thk) | 14 |
| 26***54 | Fitting | 2 |
268-4210 Lines Gp-Burner
| 26***10 | Lines Group-Burner | 1 |
| 26***45 | Fitting; (Machined) | 4 |
| 26***47 | Washer; (13x18x1.5-mm Thk) | 6 |
308-6532 Lines Gp-Fuel
| 10***16 | Bolt; (M6x16-mm) | 2 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 2 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
270-4256 Lines Gp-Fuel
| 10***05 | Plate | 3 |
| 10***54 | Connector-Orfs | 1 |
| 12***09 | Valve-Ball; (Hydraulic Tank Drain) | 1 |
323-3939 Pump Gp-Fuel Injection
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 15***76 | Mount-Isolation | 8 |
317-8021 Pump Gp-Fuel Injection
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***72 | Fitting-Fuel | 1 |
| 22***00 | Seal-O-Ring | 2 |
278-5319 Pump Gp-Fuel Injection
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 15***76 | Mount-Isolation | 8 |
291-5919 Pump & Mtg Gp-Unit Inj Hyd
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***72 | Fitting-Fuel | 1 |
| 22***00 | Seal-O-Ring | 3 |
303-2928 Pump Gp-Fuel Injection
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 15***76 | Mount-Isolation | 8 |
276-8398 Pump Gp-Fuel Injection
| 03***33 | Seal-O-Ring; (12.42mm Id) | 2 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 4 |
| 10***86 | Seal-O-Ring | 1 |
212-3657 Pump Gp-Fuel Prm & Water Sep -Electric-Primary Filter
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 17***00 | Seal; (Fuel) | 2 |
| 21***57 | Pump Group-Fuel Prm & Water Sep; -Electric-Primary Filter | 1 |
305-6376 Tank Gp-Fuel
| 29***35 | Bulkhead | 1 |
| 29***36 | Nut-Bulkhead; (1-12-Thd, Lh) | 1 |
| 30***76 | Tank Group-Fuel | 1 |
Grade References
109-5622 Leveler Gp
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5628 Leveler Gp
| 10***04 | Tube; (1.1-M) | 1 |
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5623 Leveler Gp
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5624 Leveler Gp
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5627 Leveler Gp
| 10***04 | Tube; (1.1-M) | 1 |
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
Hydraulic System
258-7161 Adapter Gp-Motor -Vibratory
| 24***15 | Seal-O-Ring | 1 |
| 25***61 | Adapter Group-Motor; -Vibratory | 1 |
| 25***63 | Adapter | 1 |
242-2749 Adapter Gp-Motor
| 24***49 | Adapter Group-Motor | 1 |
| 24***59 | Adapter | 1 |
| 24***15 | Seal-O-Ring | 1 |
270-6764 Cover Gp
| 14***10 | Plug As; (16.36mm Id) | 1 |
| 20***34 | Plate-Cover | 1 |
| 27***64 | Cover Group | 1 |
303-4148 Cover Gp
| 14***11 | Plug Group | 1 |
| 16***80 | Plug As. | 1 |
| 16***16 | Plug As | 1 |
270-7226 Cylinder & Mtg Gp-Auger
| 14***68 | Elbow Group | 4 |
| 17***51 | Pin-Clevis | 2 |
| 19***59 | Cylinder Group-Hydraulic; -Auger, Rh | 1 |
276-5032 Cylinder & Mtg Gp-Screed Hoist
| 14***68 | Elbow Group | 2 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 2 |
| 27***60 | Cylinder Group-Hydraulic; -Screed Hoist | 2 |
270-7223 Cylinder & Mtg Gp-Hopper
| 10***44 | Elbow | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
| 20***00 | Elbow As | 2 |
314-5822 Cylinder & Mtg Gp-Screed Hoist
| 14***74 | Elbow As | 2 |
| 16***88 | Elbow; (90-Deg) | 1 |
| 17***51 | Pin-Clevis | 4 |
270-3541 Cylinder & Mtg Gp-Tow Point
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 2 |
| 14***74 | Elbow As | 4 |
251-0781 Cylinder Gp-Hydraulic -Extender
| 25***81 | Cylinder Group-Hydraulic; -Extender | 1 |
| 25***60 | Kit-Seal; (Hydraulic Cylinder) | 1 |
| 5W***19 | Fitting-Grease | 2 |
194-7259 Cylinder Gp-Hydraulic -Auger, Rh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 19***59 | Cylinder Group-Hydraulic; -Auger, Rh | 1 |
| 23***20 | Kit-Plug; (Auger Cylinder) | 1 |
275-0895 Cylinder Gp-Hydraulic -Hopper
| 26***92 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 27***95 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 29***49 | Cylinder Group-Hydraulic; -Hopper | 1 |
194-7260 Cylinder Gp-Hydraulic
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 19***60 | Cylinder Group-Hydraulic; -Auger, Lh | 1 |
| 23***18 | Kit-Seal; (Auger Cylinder, Lh) | 1 |
270-3560 Cylinder Gp-Hydraulic -Screed Hoist
| 25***75 | Ring-Retaining | 1 |
| 27***60 | Cylinder Group-Hydraulic; -Screed Hoist | 1 |
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 1 |
292-8449 Cylinder Gp-Hydraulic
| 29***49 | Cylinder Group-Hydraulic; -Hopper | 1 |
268-1692 Cylinder Gp-Hydraulic
| 26***92 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 27***79 | Kit-Seal; (Hydraulic Cylinder) | 1 |
| 2K***71 | Locknut; (1-14-Thd) | 1 |
270-4253 Drive Gp-Pump
| 00***46 | Elbow; (45 Degree Pipe) | 1 |
| 09***19 | Plug-Pipe | 1 |
| 14***12 | Adapter As | 2 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 17***15 | Filter Group-Oil; -Hydraulic Tank | 1 |
258-7190 Fitting & Mtg Gp-Hydraulic -Rear, Rh Frame
| 14***75 | Elbow Group | 2 |
| 14***57 | Union Bulkhead; (Orfs) | 2 |
| 14***52 | Union As | 1 |
258-4663 Fitting & Mtg Gp-Hydraulic -Front, Lh Frame
| 14***75 | Elbow Group | 2 |
| 14***57 | Union Bulkhead; (Orfs) | 2 |
| 14***52 | Union As | 1 |
258-4664 Fitting & Mtg Gp-Hydraulic -Front, Rh Frame
| 14***75 | Elbow Group | 2 |
| 14***57 | Union Bulkhead; (Orfs) | 2 |
| 14***52 | Union As | 1 |
258-7194 Fitting & Mtg Gp-Hydraulic -Rear, Lh Frame
| 14***75 | Elbow Group | 2 |
| 14***57 | Union Bulkhead; (Orfs) | 2 |
| 14***52 | Union As | 1 |
269-6327 Hydraulic Ar
| 26***27 | Hydraulic Ar | 1 |
| 26***23 | Hydraulic Ar-Conveyor | 1 |
| 26***24 | Hydraulic Ar-Vibratory | 1 |
286-3620 Hydraulic Ar
| 16***50 | Sleeve-Abrasion; (100-In Each) | 0 |
| 25***63 | Fitting & Mtg Group-Hydraulic; -Front, Lh Frame | 1 |
| 25***64 | Fitting & Mtg Group-Hydraulic; -Front, Rh Frame | 1 |
293-8467 Hydraulic Ar-Auxiliary
| 27***38 | Valve & Mtg Group-Auxiliary | 1 |
| 27***41 | Cylinder & Mtg Group-Tow Point | 1 |
| 27***19 | Valve & Mtg Group-Control; -Parking Brake Manual Release | 1 |
269-7126 Hydraulic Ar-Fan
| 26***26 | Hydraulic Ar-Fan | 1 |
| 27***50 | Pump & Mtg Group-Hydraulic Fan | 1 |
| 27***51 | Motor & Mtg Group-Hydraulic Fan | 1 |
270-3545 Hydraulic Ar-Tamper
| 27***45 | Hydraulic Ar-Tamper | 1 |
| 27***46 | Pump & Mtg Group-Auxiliary | 1 |
| 27***48 | Lines Group-Tamper | 1 |
269-7124 Hydraulic Ar-Vibratory
| 26***24 | Hydraulic Ar-Vibratory | 1 |
| 27***31 | Lines Group-Vibratory | 1 |
| 27***32 | Valve & Mtg Group-Vibratory | 1 |
294-4656 Lines Gp-Brake & Shift
| 10***05 | Plate | 1 |
| 11***47 | Hose As | 1 |
| 12***12 | Hose As | 1 |
286-3635 Lines Gp-Connecting
| 14***27 | Connector Group | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***39 | Connector As. | 1 |
270-7217 Lines Gp-Conveyor
| 10***43 | Hose As | 1 |
| 10***79 | Hose Assem. | 1 |
| 10***63 | Hose As | 1 |
270-7233 Lines Gp-Cylinder
| 10***05 | Plate | 3 |
| 10***45 | Clamp | 6 |
| 13***90 | Hose As | 1 |
286-3629 Lines Gp-Extender
| 14***68 | Elbow Group | 1 |
| 14***84 | Elbow As | 4 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 3 |
289-5222 Lines Gp-Generator
| 13***48 | Hose As; (Labeled F) | 1 |
| 14***09 | Hose As | 1 |
| 14***60 | Elbow Group | 1 |
276-4805 Lines Gp-Grade & Slope
| 10***05 | Plate | 3 |
| 12***56 | Hose As | 2 |
| 15***28 | Union | 1 |
278-7739 Lines Gp-Hopper
| 10***03 | Plate-Cover | 5 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***77 | Elbow As. | 1 |
270-7231 Lines Gp-Hopper
| 27***31 | Lines Group-Hopper | 1 |
| 27***51 | Hose As | 2 |
| 6R***28 | Hose As | 2 |
299-7216 Lines Gp-Hydraulic
| 14***27 | Connector Group | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***39 | Connector As. | 1 |
270-7253 Lines Gp-Hydraulic Fan
| 14***38 | Elbow | 1 |
| 14***12 | Reducer As-Orfs | 1 |
| 14***29 | Tee As-Orfs | 1 |
278-1868 Lines Gp-Paver Ventilation
| 14***58 | Elbow As | 1 |
| 17***15 | Strap; (Dual Clamp) | 1 |
| 19***35 | Hose As | 1 |
294-4657 Lines Gp-Pump -Auxiliary
| 10***23 | Hose As | 1 |
| 17***20 | Strap-Dual Clamp | 1 |
| 1P***82 | Flange-Half | 2 |
270-7244 Lines Gp-Return
| 15***36 | Hose As | 1 |
| 19***06 | Bolt-Stacking; (M6x1x64-mm) | 2 |
| 1P***82 | Flange-Half | 2 |
270-7229 Lines Gp-Screed
| 10***05 | Plate | 8 |
| 10***95 | Hose As | 1 |
| 14***57 | Clamp-Double | 4 |
294-4658 Lines Gp-Steering
| 10***03 | Plate-Cover | 7 |
| 14***52 | Union As | 2 |
| 15***90 | Bolt-Stacking; (M8x1.25x33-mm) | 6 |
270-3548 Lines Gp-Tamper
| 10***25 | Hose As | 1 |
| 12***95 | Elbow | 2 |
| 14***52 | Elbow As. | 1 |
286-3627 Lines Gp-Tamper
| 10***05 | Plate | 4 |
| 14***45 | Connector As | 8 |
| 14***35 | Tee, -6 Orb / Orfs | 2 |
270-3531 Lines Gp-Vibratory
| 11***05 | Hose As; (Main Auxiliary Valve) | 1 |
| 14***26 | Hose As; (Vibe Valve Outlet) | 1 |
| 14***80 | Elbow As | 1 |
286-3628 Lines Gp-Vibratory
| 10***05 | Plate | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***45 | Connector As | 2 |
265-7799 Lines Gp-Vibratory
| 14***72 | Elbow Group | 4 |
| 14***75 | Elbow Group | 2 |
| 15***46 | Tee As | 2 |
286-3630 Manifold Gp-Control -Screed
| 14***24 | Connector Group | 1 |
| 14***27 | Connector Group | 1 |
| 14***29 | Connector As | 1 |
294-4659 Manifold Gp-Hydraulic -Auxiliary
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***08 | Adapter As | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
230-9597 Motor & Mtg Gp-Auger
| 11***80 | Elbow | 1 |
| 14***27 | Connector Group | 4 |
| 14***72 | Elbow Group | 4 |
289-5224 Motor & Mtg Gp-Generator
| 14***19 | Connector As | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 20***11 | Valve-Check | 1 |
270-7251 Motor & Mtg Gp-Hydraulic Fan
| 14***17 | Adapter, -12 Orb / -16 Orfs | 2 |
| 14***65 | Elbow | 1 |
| 27***51 | Motor & Mtg Group-Hydraulic Fan | 1 |
294-4652 Motor & Mtg Gp-Propel
| 12***47 | Elbow | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
| 15***58 | Elbow As | 2 |
258-7186 Motor & Mtg Gp-Tamper
| 09***32 | Ring-Retaining | 1 |
| 17***39 | Bolt-Socket Head; (M8x1.25x30-mm) | 4 |
| 24***49 | Adapter Group-Motor | 1 |
258-7185 Motor & Mtg Gp-Tamper -Vibratory
| 17***39 | Bolt-Socket Head; (M8x1.25x30-mm) | 4 |
| 24***12 | Ring | 1 |
| 24***85 | Coupling | 1 |
258-7162 Motor & Mtg Gp-Tamper -Vibratory
| 17***39 | Bolt-Socket Head; (M8x1.25x30-mm) | 4 |
| 24***48 | Coupling As | 1 |
| 25***55 | Motor Group-Gear; (Tamper Control) | 1 |
278-0492 Motor & Mtg Gp-Ventilation
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***74 | Elbow As | 1 |
| 15***50 | Elbow As | 1 |
263-5148 Motor & Mtg Gp-Vibratory -Screed
| 09***32 | Ring-Retaining | 1 |
| 17***39 | Bolt-Socket Head; (M8x1.25x30-mm) | 4 |
| 24***49 | Adapter Group-Motor | 1 |
258-7158 Motor Gp-Gear -Tamper Control
| 25***58 | Motor Group-Gear; -Tamper Control | 1 |
235-4849 Motor Gp-Gear -Paver Ventilation
| 23***49 | Motor Group-Gear; -Paver Ventilation | 1 |
| 26***11 | Kit-Seal; (Paver Ventilation Motor) | 1 |
227-5104 Motor Gp-Piston -Generator
| 10***78 | Bearing-Roller | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
190-8789 Motor Gp-Piston -Auger
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
294-2887 Motor Gp-Piston -Propel
| 13***84 | Nut; (M14x1.5-Thd) | 10 |
| 14***02 | Spring | 9 |
| 14***49 | Bearing | 1 |
269-0530 Motor Gp-Piston -Propel
| 07***53 | Pin; (Spring) | 2 |
| 13***95 | Orifice | 2 |
| 13***57 | Plug | 1 |
230-9384 Motor Gp-Piston -Conveyor
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
294-3078 Pump & Mtg Gp-Auxiliary
| 14***58 | Elbow As | 1 |
| 26***62 | Pump Group-Piston; -Auxiliary | 1 |
| 29***78 | Pump & Mtg Group-Auxiliary; -Auxiliary | 1 |
270-3546 Pump & Mtg Gp-Auxiliary
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***39 | Connector As. | 1 |
| 14***60 | Elbow Group | 1 |
289-5221 Pump & Mtg Gp-Generator
| 10***20 | Seal-O-Ring | 2 |
| 14***72 | Elbow Group | 1 |
| 14***85 | Elbow; (45°) | 1 |
270-7250 Pump & Mtg Gp-Hydraulic Fan
| 27***50 | Pump & Mtg Group-Hydraulic Fan | 1 |
| 29***05 | Pump Group-Gear; (Hydraulic Fan) | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
269-0533 Pump Gp-Piston
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 12 |
| 26***60 | Dowel | 4 |
| 26***33 | Pump Group-Piston; -Conveyor | 1 |
269-0562 Pump Gp-Piston -Auxiliary
| 26***62 | Pump Group-Piston; -Auxiliary | 1 |
285-4088 Pump Gp-Piston
| 03***39 | Seal-O-Ring (Id=9.25mm) | 4 |
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
269-0542 Pump Gp-Piston
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 1J***74 | Ring-Retaining | 1 |
| 20***66 | Bearing As-Roller | 1 |
289-5227 Pump Gp-Piston -Generator
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
| 14***11 | Bolt-Socket Head; (M6x1x16-mm) | 1 |
| 23***60 | Pin-Slotted | 1 |
269-7127 Tank & Mtg Gp-Hydraulic
| 08***56 | 90 Degrees Elbow | 1 |
| 14***34 | Connector Group | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
270-7254 Tank Gp-Hydraulic
| 00***39 | Adapter-Pipe | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 14***28 | Sensor Group-Temperature; -Hydraulic Oil Temp | 1 |
325-4980 Valve & Mtg Gp
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 1 |
274-5857 Valve & Mtg Gp
| 13***89 | Clip; (Ladder) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 3 |
270-3538 Valve & Mtg Gp-Auxiliary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***78 | Union | 1 |
| 14***05 | Adapter Group | 1 |
289-5223 Valve & Mtg Gp-Control -Generator
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***27 | Connector Group | 1 |
| 14***41 | Connector Group | 1 |
270-7219 Valve & Mtg Gp-Control
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
| 14***67 | Elbow Group; (Each Includes) | 2 |
| 15***81 | Tee As | 1 |
294-4654 Valve & Mtg Gp-Control -Steering
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 07***43 | Steering Column Group | 1 |
| 14***91 | Steering Wheel As | 1 |
305-6385 Valve & Mtg Gp-Control -Hydraulic Oil Cooler Bypass
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
256-2539 Valve & Mtg Gp-Control -Screed Extension
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 25***67 | Valve Group-Bank 2; -Control | 1 |
270-7222 Valve & Mtg Gp-Counterbalance -Hopper Hoist, Tow Point
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 10 |
| 14***68 | Elbow Group | 1 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 2 |
270-3559 Valve Gp-Check
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 26***55 | Kit-Flow Control Valve | 1 |
270-3532 Valve & Mtg Gp-Vibratory
| 11***80 | Elbow | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***13 | Reducer As.-Orfs | 1 |
320-2460 Valve Gp-Bank
| 27***83 | Seal-O-Ring | 4 |
| 27***88 | Valve Group-Check; (Pilot Operated)(Screed Extension) | 2 |
| 29***02 | Valve Group-Solenoid | 2 |
252-9467 Valve Gp-Bank -Control
| 25***67 | Valve Group-Bank 2; -Control | 1 |
| 27***83 | Seal-O-Ring | 4 |
| 27***88 | Valve Group-Check; (Pilot Operated)(Screed Extension) | 2 |
276-2261 Valve Gp-Control
| 25***77 | Kit-Seal; (Generator Control Valve) | 1 |
| 25***79 | Valve As-Needle | 1 |
| 25***80 | Kit-Seal; (Needle Valve) | 1 |
269-0535 Valve Gp-Control
| 22***84 | Coil As; (24-Volt) | 1 |
| 23***82 | Nut-Special | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
270-3549 Valve Gp-Control -2-Bank
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
| 26***51 | Kit-Solenoid Valve; (Auger Raise, Lower) | 2 |
| 26***26 | Kit-Check Valve; (Apron Fold) | 2 |
248-1348 Valve Gp-Control -Piston Pump
| 23***73 | Seal-O-Ring | 4 |
| 24***48 | Valve Group-Control; -Piston Pump | 1 |
| 30***49 | Plug-Adjustment, Pipe | 1 |
292-9094 Valve Gp-Counterbalance -Hopper Hoist, Tow Point
| 26***51 | Kit-Solenoid Valve; (Auger Raise, Lower) | 2 |
| 26***58 | Kit-Check Valve | 2 |
| 29***94 | Valve Group-Counterbalance; -Hopper Hoist, Tow Point | 1 |
273-5920 Valve Gp-Flow Divider
| 22***90 | Nut | 1 |
| 22***91 | Seal-O-Ring | 1 |
| 25***57 | Kit-Seal; (Check Valve) | 1 |
302-5962 Valve Gp-Flow Divider -Front Wheel Assist
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 2 |
| 14***65 | Elbow | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
276-6041 Valve Gp-Pump Control -Generator
| 03***39 | Seal-O-Ring (Id=9.25mm) | 4 |
| 12***42 | Gasket | 1 |
| 27***41 | Valve Group-Pump Control; -Generator | 1 |
310-8017 Valve Gp-Solenoid
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 31***17 | Valve Group-Solenoid; -Piston Pump | 1 |
| 31***18 | Valve-Servo | 2 |
325-7582 Valve Gp-Solenoid -Front Wheel Assist
| 22***80 | Seal-O-Ring | 1 |
| 22***82 | Seal-O-Ring | 1 |
| 22***83 | Nut-Knurl; (1/2-20-Thd) | 1 |
305-5369 Valve Gp-Solenoid
| 30***69 | Valve Group-Solenoid | 1 |
| 30***70 | Coil-Solenoid | 1 |
| 30***71 | Nut; (Coil) | 1 |
269-0589 Valve Gp-Solenoid -Screed
| 26***89 | Valve Group-Solenoid; -Screed | 1 |
| 30***69 | Valve Group-Solenoid | 1 |
276-6042 Valve Gp-Solenoid -Pump Control
| 26***51 | Kit-Seal; (Solenoid Valve)(Solenoid Valve) | 1 |
| 26***45 | Nut; (1/2-32-Thd) | 1 |
| 27***42 | Valve Group-Solenoid; -Pump Control | 1 |
294-0802 Valve Gp-Solenoid
| 21***14 | Seal-O-Ring | 1 |
| 21***74 | Seal & Retainer As | 2 |
| 21***75 | Seal-O-Ring | 1 |
263-2536 Vibratory Gp -Hydraulic
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 24***05 | Shaft Group-Vibratory | 1 |
| 24***36 | Key-Rectangular; (Square) | 2 |
265-8847 Vibratory Gp
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 4 |
| 26***85 | Housing Group-Eccentric Weight | 2 |
| 26***11 | Shaft Group-Vibratory | 2 |
242-2752 Vibratory Gp -Rear, Lh
| 1T***43 | Ball Bearing | 2 |
| 24***43 | Plug | 1 |
| 24***80 | Shaft As-Drive | 1 |
242-2750 Vibratory Gp -Front, Lh
| 1T***43 | Ball Bearing | 2 |
| 24***43 | Plug | 1 |
| 24***50 | Vibratory Group; -Front, Lh | 1 |
242-2753 Vibratory Gp -Rear, Rh
| 1T***43 | Ball Bearing | 2 |
| 24***43 | Plug | 1 |
| 24***80 | Shaft As-Drive | 1 |
242-2751 Vibratory Gp -Front, Rh
| 09***01 | Bolt-Socket Head; (M8x1.25x40-mm) | 6 |
| 1T***43 | Ball Bearing | 2 |
| 24***43 | Plug | 1 |
265-0684 Vibratory Gp
| 26***49 | Housing Group-Eccentric Weight; -Main, Lh | 2 |
| 26***84 | Vibratory Group | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 8 |
Implements
251-0770 Bar Gp-Tamper
| 25***70 | Bar Group-Tamper | 1 |
| 25***71 | Bar-Tamper; (Main, Rh) | 1 |
| 25***72 | Bar-Tamper; (Main, Lh) | 1 |
287-2280 Tamper Gp-Screed
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 27***35 | Clamp | 22 |
| 28***11 | Blade; (Main, Lh) | 1 |
328-9581 Blade & Heater Gp-Tamper
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 27***35 | Clamp | 8 |
| 30***09 | Heater As | 2 |
295-2112 Blade & Heater Gp-Tamper
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
| 27***35 | Clamp | 8 |
| 29***12 | Blade & Heater Group-Tamper | 1 |
288-9424 Extension Ar -Electric Heat, 7-M
| 27***88 | Plate & Heater Group-Screed | 1 |
| 27***35 | Universal Joint Group | 2 |
| 28***24 | Extension Ar; -Electric Heat, 7-M | 1 |
241-9103 Extension Ar-Auger
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
| 21***53 | Extension Group-Main Frame | 1 |
339-9632 Extension Ar-Screed -Electric Heat, 6.5-M
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
328-9606 Extension Ar-Screed -Electric Heat, 7-M
| 29***20 | Extension Group-Screed | 1 |
| 29***33 | Extension Group-Screed; -6.5-M | 1 |
| 29***44 | Conversion Ar-Screed; -Electric Heat, 250-mm Extension | 1 |
288-9422 Extension Ar-Screed -Electric Heat, 5.5-M
| 27***88 | Plate & Heater Group-Screed | 1 |
| 28***22 | Extension Ar-Screed; -Electric Heat, 5.5-M | 1 |
| 29***36 | Extension Group-Main Frame | 1 |
328-9593 Extension Ar-Screed -Electric Heat, 6.5-M
| 29***33 | Extension Group-Screed; -6.5-M | 1 |
| 32***85 | Cover Group-Screed | 1 |
| 32***92 | Conversion Ar-Screed; -Electric Heat, 750-mm Extension | 1 |
288-9421 Extension Ar-Screed -Lpg Heat
| 25***18 | Burner Group | 1 |
| 26***71 | Box Group-Control; -Burner | 1 |
| 26***10 | Lines Group-Burner | 1 |
328-9570 Extension Ar-Screed -Electric Heat, 5.5-M
| 29***20 | Extension Group-Screed | 1 |
| 29***44 | Conversion Ar-Screed; -Electric Heat, 250-mm Extension | 1 |
| 30***69 | Wiring Group-Screed Heater; -250-mm Extension, Cover | 1 |
288-9423 Extension Ar-Screed -7-M
| 25***18 | Burner Group | 1 |
| 26***87 | Conversion Ar-Screed; -Lpg Heat | 1 |
| 26***71 | Box Group-Control; -Burner | 1 |
339-9631 Extension Ar-Screed -Electric Heat, 5.5-M
| 24***03 | Extension Ar-Auger | 1 |
| 24***18 | Tube As; (1.8-M) | 1 |
| 32***70 | Extension Ar-Screed; -Electric Heat, 5.5-M | 1 |
288-9426 Extension Ar-Screed -Electric Heat, 6.5-M
| 27***35 | Universal Joint Group | 2 |
| 28***26 | Extension Ar-Screed; -Electric Heat, 6.5-M | 1 |
| 29***01 | Conversion Ar-Screed; -Electric Heat | 1 |
288-9427 Extension Ar-Screed -Lpg
| 26***87 | Conversion Ar-Screed; -Lpg Heat | 1 |
| 26***06 | Lines Group-Burner | 1 |
| 27***35 | Universal Joint Group | 2 |
339-9633 Extension Ar-Screed -Electric Heat, 7-M
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
288-9425 Extension Ar-Screed -Lpg
| 26***72 | Conversion Ar-Screed; -Lpg Heat | 1 |
| 26***05 | Lines Group-Burner | 1 |
| 27***35 | Universal Joint Group | 2 |
304-5238 Extension Gp-Screed -8-M
| 10***81 | Tube As; -Ski Tow | 1 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
282-8513 Extension Gp-Screed -5.5-M
| 24***03 | Extension Ar-Auger | 1 |
| 24***18 | Tube As; (1.8-M) | 1 |
| 28***13 | Extension Group-Screed; -5.5-M | 1 |
282-8510 Extension Gp-Screed -6.5-M
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
282-8514 Extension Gp-Screed -6.5-M
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
282-8511 Extension Gp-Screed -7-M
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
292-8833 Extension Gp-Screed -6.5-M
| 09***85 | Locknut; (M16x2-Thd) | 4 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 8 |
| 13***82 | Bolt; (M16x2x100-mm) | 4 |
304-5239 Extension Gp-Screed -7-M
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
282-8509 Extension Gp-Screed -5.5-M
| 24***03 | Extension Ar-Auger | 1 |
| 24***18 | Tube As; (1.8-M) | 1 |
| 28***09 | Extension Group-Screed; -5.5-M | 1 |
286-3622 Heater Ar-Screed -Lpg Heat
| 25***70 | Bar Group-Tamper | 1 |
| 25***19 | Plate Group-Screed; -Gas | 1 |
| 26***03 | Plate & Film Group | 1 |
286-3624 Heater Ar-Screed
| 28***24 | Heater Ar-Screed; -Electric | 1 |
| 28***33 | Wiring Group-Heater | 1 |
| 28***69 | Plate Group-Screed | 1 |
263-5151 Housing Gp-Eccentric Weight -Extension
| 08***36 | Clip-Internal; (Water Temperature Regulator) | 1 |
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
| 24***09 | Shaft As | 1 |
265-0685 Housing Gp-Eccentric Weight
| 09***41 | Ring-Retaining | 1 |
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
| 24***12 | Seal-Shaft | 2 |
263-5150 Housing Gp-Eccentric Weight -Main, Rh
| 09***41 | Ring-Retaining | 1 |
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
| 24***07 | Shaft As | 1 |
263-5149 Housing Gp-Eccentric Weight -Main, Lh
| 09***41 | Ring-Retaining | 1 |
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
| 24***06 | Shaft As | 1 |
310-0808 Indicator Gp-Tow Point
| 19***29 | Bolt-Shoulder; (M8x1.25-Thd) | 2 |
| 19***56 | Plate; (Scale) | 2 |
| 30***50 | Plate | 2 |
305-5869 Manifold Gp-Fuel
| 26***43 | Manifold As-Gas | 1 |
| 26***46 | Fitting | 8 |
| 26***47 | Washer; (13x18x1.5-mm Thk) | 8 |
325-4950 Plate Gp-Slide
| 32***47 | Support As | 1 |
| 32***50 | Plate Group-Slide | 1 |
| 32***52 | Pad | 2 |
275-2449 Roller Ar-Push
| 19***08 | Bar | 2 |
| 19***09 | Pin As | 1 |
| 27***49 | Roller Ar-Push | 1 |
292-0983 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 10***64 | Shaft As | 2 |
| 16***17 | Roller | 2 |
242-2677 Shaft Gp-Drive
| 24***77 | Shaft Group-Drive | 1 |
296-9357 Shaft Gp-Vibratory -Eccentric, Rh
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
296-9358 Shaft Gp-Vibratory -Eccentric, Lh
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
265-6611 Shaft Gp-Vibratory
| 26***11 | Shaft Group-Vibratory | 1 |
292-4011 Tamper Gp-Screed -Rh
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
292-4010 Tamper Gp-Screed -Lh
| 09***76 | Nut; (M14x2-Thd) | 4 |
| 15***22 | Washer-Hard; (14x30x3-mm Thk) | 4 |
| 1T***43 | Ball Bearing | 2 |
251-0764 Tamper Gp-Screed
| 09***76 | Nut; (M14x2-Thd) | 8 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 22 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
269-5145 Tube Gp-Extension
| 14***80 | Pin | 2 |
| 26***43 | Tube As | 1 |
| 26***44 | Wall As | 1 |
251-0767 Tube Gp-Extension -Telescoping
| 24***49 | Breather; (Hydraulic Cylinder) | 1 |
| 24***88 | Seal; (100x112x12-mm) | 1 |
| 24***89 | Seal; (140x155x16-mm) | 1 |
269-5142 Tube Gp-Extension -Sliding
| 14***80 | Pin | 2 |
| 26***41 | Wall As | 1 |
| 26***42 | Tube Group-Extension; -Sliding | 1 |
Lubrication System
277-2912 Filter Gp-Engine Oil
| 26***25 | Filter-Engine Oil | 1 |
| 27***12 | Filter Group-Engine Oil; -Engine | 1 |
277-4262 Pump Gp-Engine Oil
| 27***62 | Pump Group-Engine Oil | 1 |
| 31***45 | Pump-Oil; (Engine) | 1 |
| 6I***90 | Bolt; (M8x1.25x40-mm) | 4 |
277-4694 Valve Gp-Fluid Sampling -Engine Oil
| 19***67 | Seal-O-Ring | 1 |
| 21***33 | Valve As-Fluid Sampling | 1 |
| 23***61 | Plug; (Blanking) | 1 |
Machine Arrangement
262-4123 Chassis Ar
| 26***23 | Chassis Ar | 1 |
| 26***04 | Hopper Group | 1 |
| 26***07 | Door Group-Access | 1 |
269-3837 Common Ar
| 26***05 | Conveyor Ar-Drag & Auger | 1 |
| 26***06 | Installation Ar-Engine | 1 |
| 26***08 | Structural Ar | 1 |
295-2101 Conversion Ar-Screed -Electric Heat
| 29***01 | Conversion Ar-Screed; -Electric Heat | 1 |
| 29***11 | Plate & Heater Group-Screed | 1 |
| 29***12 | Blade & Heater Group-Tamper | 1 |
265-3787 Conversion Ar-Screed -Lpg Heat
| 26***87 | Conversion Ar-Screed; -Lpg Heat | 1 |
| 26***71 | Box Group-Control; -Burner | 1 |
| 26***72 | Conversion Ar-Screed; -Lpg Heat | 1 |
299-7260 Conversion Ar-Screed
| 29***16 | Lines Group-Hydraulic | 1 |
| 29***60 | Conversion Ar-Screed | 1 |
| 32***76 | Arm Group-Drop | 1 |
299-7244 Conversion Ar-Screed -Electric Heat, 250-Mm Extension
| 03***57 | Washer; (13x26x6-mm Thk) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 2 |
328-9592 Conversion Ar-Screed -Electric Heat, 750-Mm Extension
| 32***79 | Plate & Heater Group-Screed; -750-mm Extension | 1 |
| 32***81 | Blade & Heater Group-Tamper; -750-mm Extension | 1 |
| 32***91 | Wiring Group-Screed Heater; -750-mm Extension | 1 |
266-3172 Conversion Ar-Screed -Lpg Heat
| 26***07 | Control Group-Burner; (Rh) | 1 |
| 26***33 | Control Group-Burner; (Lh) | 1 |
| 26***71 | Box Group-Control; -Burner | 1 |
295-2097 Conversion Gp-Screed -Fuel Fired Heater
| 24***93 | Stud; (M12x1.75x100-mm) | 40 |
| 24***95 | Support As | 4 |
| 24***32 | Support As; (Burner) | 4 |
295-2096 Conversion Gp-Screed -Fuel Fired Heater
| 24***93 | Stud; (M12x1.75x100-mm) | 20 |
| 24***95 | Support As | 2 |
| 24***32 | Support As; (Burner) | 2 |
291-8020 Common Ar
| 09***22 | Ring-Retaining | 2 |
| 09***85 | Locknut; (M16x2-Thd) | 2 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 4 |
270-6762 Generator Ar-Hydraulic
| 27***62 | Generator Ar-Hydraulic | 1 |
| 28***20 | Generator Group; -Hydraulic | 1 |
| 28***21 | Pump & Mtg Group-Generator | 1 |
281-6251 Screed Ar
| 25***66 | Deflector Group | 1 |
| 25***68 | Adjuster Group-Manual | 1 |
| 25***70 | Lines Group-Grease | 1 |
295-2104 Screed Ar
| 26***84 | Vibratory Group | 1 |
| 26***99 | Lines Group-Vibratory | 1 |
| 26***47 | Vibratory Group | 1 |
295-2102 Screed Ar
| 26***84 | Vibratory Group | 1 |
| 26***99 | Lines Group-Vibratory | 1 |
| 29***02 | Screed Ar | 1 |
Operator Station
270-4013 Canopy Gp
| 17***55 | Pin | 2 |
| 24***14 | Rod | 2 |
| 27***13 | Canopy Group | 1 |
311-6189 Console Gp-Operator
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
| 11***87 | Start Switch Assembly; (Key)(Engine) | 1 |
269-2817 Console Gp-Operator
| 11***77 | Bumper-Rubber | 4 |
| 14***03 | Screw-Button Head; (M10x1.5x30-mm) | 6 |
| 14***64 | Seal; (142-cm) | 0 |
284-8905 Control Gp-Unprgmed Monitor -Advisor
| 27***48 | Control Group-Unprgmed Monitor; -Advisor | 1 |
| 28***05 | Control Group-Unprgmed Monitor; -Advisor | 1 |
263-6011 Floor Mat Gp
| 23***39 | Floor Mat | 2 |
| 26***11 | Floor Mat Group | 1 |
| 27***41 | Floor Mat | 1 |
292-0956 Guard Gp-Vandalism
| 15***93 | Screw-Button Head; (M4x0.7x12-mm) | 2 |
| 21***13 | Handle | 2 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
132-3090 Lever Gp-Propel
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
262-4125 Operator Ar
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 26***25 | Operator Ar | 1 |
| 26***62 | Platform Group-Operator; -Rh | 1 |
295-0996 Panel Gp-Instrument
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
326-6137 Panel Gp-Instrument
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***87 | Switch As-Toggle; (Screed Raise/Hld/Float) | 1 |
261-7148 Pedal Gp-Governor
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
269-2562 Platform Gp-Operator -Rh
| 13***64 | Bushing | 2 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
| 19***91 | Bearing-Flange | 2 |
272-1764 Platform Gp-Operator
| 03***69 | Tube | 4 |
| 25***07 | Spacer; (8.4x14x17-mm Thk) | 4 |
| 27***64 | Platform Group-Operator | 1 |
286-3618 Platform Gp-Operator
| 28***93 | Cover Group-Screed | 1 |
| 28***18 | Platform Group-Operator | 1 |
| 31***00 | Platform Group-Operator; -Slide | 1 |
315-3700 Platform Gp -Slide
| 17***11 | Locknut; (M16x2-Thd) | 4 |
| 24***09 | Damper | 8 |
| 25***38 | Pad | 4 |
272-0395 Platform Gp-Operator -Lh
| 13***64 | Bushing | 2 |
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
| 19***91 | Bearing-Flange | 2 |
235-3151 Seat Gp-Suspension -Vinyl
| 19***32 | Kit-Foam Back | 1 |
| 20***36 | Kit-Damper | 1 |
| 20***37 | Kit-Seat; (Indicators) | 1 |
199-4298 Seat Gp-Suspension -Vinyl
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 2 |
Power Train
295-5504 Assist Gp-Front Wheel
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***85 | Bolt; (1-14x5-In) | 2 |
312-8768 Assist Gp-Front Wheel
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***85 | Bolt; (1-14x5-In) | 2 |
262-4124 Drive Ar-Final
| 26***24 | Drive Ar-Final | 1 |
| 29***75 | Drive Group-Final | 1 |
294-2875 Final Drive Gp
| 16***69 | Adapter; (Str Thd (-6) Orfs/0) | 2 |
| 29***75 | Drive Group-Final | 1 |
| 31***01 | Housing-Planetary | 2 |
265-7279 Drive Gp-Hydrostatic -Pump
| 26***79 | Drive Group-Hydrostatic; -Pump | 1 |
| 27***40 | Kit-Seal; (Pump Drive) | 1 |
| 27***41 | Kit-Bearing | 1 |
293-8465 Hydraulic Ar-Propel
| 29***65 | Hydraulic Ar-Propel | 1 |
| 29***52 | Motor & Mtg Group-Propel | 1 |
| 29***53 | Lines Group-Propel | 1 |
302-5965 Lines Gp-Propel -Front Wheel Assist
| 10***03 | Plate-Cover | 2 |
| 10***05 | Plate | 2 |
| 10***49 | Plate | 1 |
302-5963 Lines Gp-Propel -Front Wheel Assist
| 10***03 | Plate-Cover | 2 |
| 10***05 | Plate | 2 |
| 10***49 | Plate | 1 |
294-4653 Lines Gp-Propel
| 10***37 | Hose As | 1 |
| 11***95 | Hose As | 1 |
| 12***09 | Valve-Ball; (Hydraulic Tank Drain) | 1 |
296-3465 Pump Gp-Dual Propel
| 12***88 | Flange-Split | 4 |
| 14***67 | Connector | 1 |
| 14***15 | Connector As | 1 |
294-2881 Wheel & Tire Gp
| 1K***74 | Valve Group; (Tire Inflation) | 1 |
| 29***81 | Wheel & Tire Group | 1 |
| 29***83 | Wheel Group | 1 |
294-2880 Wheel & Tire Gp
| 10***34 | Extension-Valve | 1 |
| 10***35 | Valve-Rim | 1 |
| 29***80 | Wheel & Tire Group | 1 |
294-2878 Wheel Ar
| 29***78 | Wheel Ar | 1 |
| 29***80 | Wheel & Tire Group | 2 |
294-2879 Wheel Ar
| 29***79 | Wheel Ar | 1 |
| 29***81 | Wheel & Tire Group | 2 |
294-2882 Wheel Gp
| 29***82 | Wheel Group | 1 |
| 29***84 | Wheel As | 1 |
| 2D***43 | Seal-O-Ring | 1 |
294-2883 Wheel Gp
| 29***83 | Wheel Group | 1 |
| 29***85 | Wheel As | 1 |
| 2D***65 | Seal-O-Ring | 1 |
Service Equipment And Supplies
303-8783 Box Gp-Tool
| 29***58 | Hinge As | 2 |
| 30***81 | Door | 1 |
| 30***82 | Tool Box | 1 |
290-2118 Film Gp-International
| 22***45 | Film-Warning; (Shock Hazard) | 1 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
| 22***46 | Film-Warning; (No Ether Spray/Air Intk, Intl) | 1 |
306-5155 Kit-Maintenance
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
| 10***86 | Switch Group-Toggle; (Parking Brake Override Control) | 1 |
278-0358 Lines Gp-Spray Down
| 27***58 | Lines Group-Spray Down | 1 |
| 28***78 | Connector | 1 |
| 28***79 | Connector As | 1 |
7r-4741 Lines Gp-Spray Down
| 08***77 | Adapter | 1 |
| 1G***70 | Extension-Curve | 1 |
| 1G***79 | Hose As | 1 |
290-2119 Plate & Film Gp
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
265-6503 Plate & Film Gp
| 26***03 | Plate & Film Group | 1 |
| 26***96 | Film-Warning; (Fire Hazard, Read Omm) | 2 |
| 26***96 | Film-Warning; (Hot Surface) | 4 |
309-1496 Plate & Film Gp
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
| 29***22 | Film-Danger; (Shock, Electrocution Hazard) | 7 |
| 30***96 | Plate & Film Group | 1 |
286-3619 Plate & Film Gp
| 18***68 | Plate-Serial Number | 1 |
| 1P***07 | Film-Symbol; 2 On Bottom Of Upper Frame Below Engine. 2 On Front Of Upper Frame Above Boom Articulation | 2 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
266-4529 Pump & Motor Gp-Washdown
| 26***29 | Pump & Motor Group-Washdown; -Water-Emulsion-Diesel Fuel | 1 |
| 31***68 | Kit-Diaphragm | 1 |
| 31***69 | Kit-Valve | 1 |
278-0357 Reel Gp-Washdown Hose
| 15***02 | Spacer; (11x20x15-mm Thk) | 2 |
| 16***00 | Connector As | 1 |
| 19***88 | Clip | 2 |
297-2512 Washdown Gp-Ecology
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 00***14 | Coupling-Pipe | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
Slope And Grade Control
272-0697 Beam Gp-Transverse
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 19***78 | Pad | 2 |
| 27***97 | Beam Group-Transverse | 1 |
298-0648 Cable Gp-Control
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***08 | Bushing | 2 |
298-0647 Cable Gp-Control
| 10***63 | Clamp | 1 |
| 11***98 | Plug | 1 |
| 11***08 | Bushing | 2 |
209-3130 Control Gp-Grade & Slope
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
| 14***76 | Plug-Connector | 1 |
298-0645 Control Gp-Grade & Slope
| 20***30 | Control Group-Grade & Slope | 1 |
| 23***08 | Link; (6-Pin) | 2 |
| 25***30 | Mount As | 2 |
298-0642 Sensor Gp-Grade
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
258-6580 Sensor Gp-Sonic -Averaging Ski
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
282-8520 Sensor Gp-Sonic
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
| 10***23 | Cable As; (Grade) | 1 |
257-6255 Ski Gp-Averaging
| 25***29 | Mount As | 2 |
| 25***30 | Mount As | 2 |
| 25***55 | Ski Group-Averaging | 1 |
Undercarriage
312-2632 Bogie Gp -Rh
| 00***31 | Cup-Bearing | 4 |
| 00***43 | Nut | 2 |
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
312-3647 Bogie Gp -Rh
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
| 08***77 | Plate-Locking | 2 |
| 10***85 | Bolt; (1-14x5-In) | 2 |
312-2263 Bogie Gp -Rh
| 00***31 | Cup-Bearing | 2 |
| 00***43 | Nut | 1 |
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
312-2631 Bogie Gp -Lh
| 00***31 | Cup-Bearing | 4 |
| 00***43 | Nut | 2 |
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
311-9347 Bogie Gp
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
| 10***85 | Bolt; (1-14x5-In) | 2 |
| 10***59 | Shim; (0.51-mm Thk) | 2 |
312-3646 Bogie Gp -Lh
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
| 07***86 | Wire | 0 |
| 08***77 | Plate-Locking | 2 |
312-2262 Bogie Gp -Lh
| 00***31 | Cup-Bearing | 2 |
| 00***43 | Nut | 1 |
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
AP-600D serial number reference
The PIN plate sits on the back of the machine, below the operator station steps. The plate shows the model number and a Product Identification Number string; the serial number is the last 8 characters of that PIN, and the first 3 characters of the serial number are the prefix used to look up compatible parts.
| Prefix | Identifies | Notes |
|---|---|---|
| TFM | AP600D wheel asphalt paver | Same generation as the AP655C and AP655D track pavers, sharing feeder, auger and undercarriage parts. Powered by the Cat C6.6 engine, EPA Tier 3 compliant. Distinct from the current bare-name AP600/AP600F relaunch, which carries its own separate prefixes - do not cross parts between the two generations. |
| TFZ | AP600D wheel asphalt paver | Same generation and parts grouping as TFM, shared with the AP655C and AP655D. Powered by the Cat C6.6 engine. Separate from the modern bare-name AP600/AP600F prefix set - do not cross parts between the two generations. |
Frequently asked questions
What engine powers the Cat AP-600D asphalt paver?
A Cat C6.6 ACERT, a 6-cylinder turbocharged ATAAC diesel producing 129.5 kW/176 hp gross (121.9 kW/165.8 hp net) from 6.6 L displacement, meeting EU Stage IIIA/EPA Tier 3 emissions standards.
What is the operating weight of the AP-600D?
About 18,200 kg (40,124 lb) as configured with the AS4251C screed. Actual weight varies by screed width and options, so treat this as a baseline figure rather than a fixed number.
What replaced the Cat AP-600D?
There is no confirmed direct one-for-one successor. Caterpillar did not carry the D suffix forward on this line; the AP-600D's TFM/TFZ Tier 3 generation was succeeded generally by later Cat wheel paver generations, including a bare-name AP600/AP600F relaunch that uses a different engine and serial-prefix set and forms its own separate parts catalog.
What AP-600D owners discuss
How does the hydrostatic wheel drive typically behave as it wears, and what's the first sign of trouble?
On these wheel-drive pavers the propel pump usually fails before the drive motor, since the return-line filter sits downstream of the motor and lets contamination reach the pump first. Watch for one wheel gradually losing power under load or the machine drifting off a straight line at paving speed before a full failure shows up. Confirm tire ballast and inflation match side to side before blaming the hydrostatic circuit -- uneven ballast or pressure alone makes one wheel spin and wear faster, and that can mimic a drive fault.
What wear patterns show up first on this wheeled paver's tires and undercarriage?
Because this is a rubber-tired tractor rather than a track machine, tire and ballast balance side to side matters more than most operators expect. A tire carrying less ballast or lower air pressure than its opposite number spins under load and wears noticeably faster, and that imbalance can look like a drive or steering problem. Weekly checks on tire inflation and ballast volume, plus greasing the wheel bearing and bogie points, catch most of this before it turns into a bigger repair.
What quirks come with the C6.6 ACERT engine in this generation of paver?
Cold-weather hard starting is usually traced to the high-pressure fuel pump or the injection system rather than the batteries, and injector wear shows up as rough idle, extra smoke, or a fuel-economy drop over time. Valve lash is worth tracking closely too -- the recommended interval is a valve set around 500 hours on a new or rebuilt engine and roughly every 1000 hours after, tighter than many operators expect from a mid-range diesel. Persistent hard-start, overheating, or injector-leak complaints should go to a dealer for proper fuel-system and cooling diagnostics -- have your dealer verify before any injector or high-pressure fuel work.
What screed hydraulic issues come up most often?
The hoses feeding the screed eccentrics sit close to the vibration source and get brittle with age, so a split hose there is a common way for hydraulic fluid to show up under the screed. The other frequent leak point is the extension slide-out seals -- if compacted mix builds up on the extension tubes and gets dragged in and out, it grinds the seals until they weep oil. Daily wipe-down of the extensions and a visual check of the eccentric hoses head off most of these leaks before they cause a shutdown.
What electrical and sensor issues turn up on these pavers?
Grade and slope sensors are sensitive to interference from each other -- if a folded-up averaging beam leaves several ski or sonic sensors close together, the unused ones create noise that shows up as erratic elevation readings on the active sensor. Unplugging sensors that aren't in use, or spacing them apart, resolves most of this. On the switching side, PWM valve and harness faults are more often a wiring or connector problem (chafed, corroded, or wet contacts) than a bad solenoid, so check the harness before swapping parts. Any fault affecting screed lift or propel control should be confirmed by a dealer technician before the machine goes back to work.
What should a buyer inspect on a used AP-600D beyond engine hours?
Look hard at the feeder system -- floor plates that have thinned and warped, auger flights worn to a point, a sagging conveyor chain, and flight bars that let mix pack in underneath all point to hard use. Screed plates wear fastest of any part on the machine and typically need replacing once or twice a paving season, so check thickness with calipers rather than eyeballing it, and look for uneven wear front-to-rear that hints at a twisted screed frame. Test electrical harnesses and any heating elements with a meter, and check the hopper wings -- straight, clean wings usually mean a well-kept machine, while bent and paint-stripped wings suggest otherwise. Pull service records to confirm valve-lash and hydraulic-filter intervals were actually kept, not just the oil changes.
Any general operating quirks worth knowing on this platform?
Dual operating stations that swing out beyond the frame help with joint-matching but expose more sensor and switch wiring to weather and mix debris than a single-station paver, so that wiring is worth a periodic look on top of the usual checks. The front-mounted cooling package needs its screen kept clear of fines and debris, since a partly blocked screen behaves like a cooling-system fault long before the thermostat or radiator is actually the cause.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific AP-600D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.