Caterpillarasphalt paver
Caterpillar AP-1055D
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar AP-1055D is a 3.05 m (10 ft) class track-type asphalt paver built around the Cat C7 engine with ACERT Technology, a turbocharged 6-cylinder diesel rated 167 kW (224 hp) gross power (SAE J1995) at 2200 rpm with 872 N·m (643 ft/lb) of torque, meeting U.S. EPA Tier 3 and E.U. Stage IIIA emissions. Tractor weight runs roughly 16,600-17,100 kg (36,600-37,580 lb) depending on undercarriage, and a fully configured machine with screed and heat package lands between about 19,900 kg and 20,600 kg (43,800-45,420 lb). Cat offered the AP-1055D with a choice of Mobil-trac rubber-belted undercarriage or a steel-track undercarriage, and a range of screeds -- the AS-2301 (Vers-A-Mat), Extend-A-Mat 10-20B/10-20WB, and Pavemaster 10B -- in diesel or electric heat depending on the option. It sits in the middle of a lineage that runs from the earlier mechanical AP-1050B and AP-1055B pavers through the AP-1055D covered here to the later dash-less AP1055.
The defining change from the AP-1055B to the AP-1055D was the move from a mechanical 3116TA engine to the electronically controlled C7 ACERT, adding HEUI fuel injection, an ADEM A4 engine control module, and Cat Electronic Technician diagnostics in place of fixed-timing fuel delivery, while carrying over the dual-operator-station layout, gateless four-motor feeder/auger control, and a factory 500-hour engine oil change interval. AP-1055D serial prefixes span the A6P, FAC, and BXW production runs. Cat later replaced this generation with the dash-less AP1055, built around the C7.1 engine with standard electric screed heat and Pave Start Assistant. Because the AP-1055D shipped through dealer networks in real volume for several years, it remains common in state DOT and municipal paving fleets today, which keeps used-machine availability and parts supply healthier than for the older AP-1050B/AP-1055B generation.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar AP-1055D specifications
Engine
| Model | Cat C7 with ACERT Technology, 6-cylinder turbocharged diesel |
| Gross power (SAE J1995) | 167 kW (224 hp) at 2200 rpm |
| Net power | 165 kW (221 hp, SAE J1349) to 166 kW (223 hp, EEC 80/1269) at 2200 rpm |
| Peak torque | 872 N·m (643 lb-ft) |
| Displacement | 7.2 L (441.7 cu in) |
| Bore x stroke | 111.8 mm x 127 mm (4.4 in x 5.0 in) |
| Emissions | Meets U.S. EPA Tier 3 and E.U. Stage IIIA |
Weights
| Tractor weight (base unit, no screed, Mobil-trac) | 17,046 kg (37,580 lb) |
| Tractor weight (steel track configuration) | 16,601 kg (36,600 lb) |
| Operating weight with AS2301 screed | 20,470-20,600 kg (45,130-45,420 lb), varies by source/configuration |
| Operating weight with Extend-A-Mat 10-20B screed | 20,470 kg (45,130 lb) |
Dimensions
| Length, with push roller and AS2301 screed | 6.55 m (21.5 ft) |
| Length, tractor only (no screed) | 4.79 m (15.7 ft) |
| Length, with truck hitch | 7.03 m (23.08 ft) |
| Overall height | 3.56 m (11.67 ft) |
| Transport height (muffler removed) | 2.82-2.83 m (9.25-9.3 ft) |
| Transport width, hoppers raised with end gates | 3.32-3.38 m (10.92-11.08 ft), varies by screed |
| Track contact length | 3.02 m (9.92 ft) |
| Track width | 457 mm (18 in) |
| Inside turn radius | 0.91 m (3 ft) |
Performance
| Maximum travel speed | 14.5 km/h (9 mph) |
| Maximum paving speed | 67 m/min (220 ft/min) |
| Paving width range | 2.44-7.38 m (8-24.2 ft) |
| Standard paving width | 3.05 m (10 ft) |
| Auger diameter | 406 mm (16 in) |
Service capacities (summary)
| Fuel tank | 462 L (122 gal) |
| Hydraulic system | 149 L (39.4 gal) |
| Cooling system | 36 L (9.5 gal) |
| Hopper capacity | 6.1 m³ (215 ft³), rated for approximately 13-14.5 tonne of mix |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
AP-1055D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase, with filter (Cat C7 ACERT, turbocharged 6-cylinder diesel, 7.24 L displacement) | 26 L (6.8 US gal) | Cat DEO or DEO-ULS diesel engine oil. Grade by ambient temperature at start-up rather than by season alone: SAE 10W-30 covers the broadest range, roughly -18°C to 40°C (0°F to 104°F); SAE 15W-40 suits consistently warm climates; SAE 0W-40 is preferred over 0W-20 or 0W-30 where cold-start temperatures run well below -18°C. Confirm against the data plate viscosity chart before topping off. |
| Cooling system | 36 L (9.5 US gal) | Cat ELC (Extended Life Coolant), factory premix, or Cat DEAC where ELC isn't stocked. Hold factory concentration for freeze and boil protection. Don't cross-mix ELC and conventional coolant chemistries in the same system. |
| Fuel tank (dual tanks, combined) | 462 L (122 US gal) | Ultra-low sulfur No. 2 diesel suited to the C7 ACERT's Tier 3 / Stage IIIa emissions calibration. Switch to a winter blend or add an anti-gel treatment below freezing. |
| Hydraulic system and tank (closed-loop hydrostatic propel, feeder/auger drives, steering, screed functions) | 149 L (39.4 US gal) tank capacity | Cat HYDO Advanced hydraulic oil is the typical factory fill for this hydrostatic-drive paver line, graded by climate the same way as engine oil (a lighter HYDO Advanced grade in cold climates, a heavier grade above roughly 40°C/104°F). Some paver hydrostatic circuits spec Cat TDTO instead for combined hydraulic and drivetrain duty — verify which fluid family the machine actually carries before topping off or mixing types. |
| Propel final drives / planetary gearboxes (Mobil-trac or steel track undercarriage, per side) | Not published in the factory capacity chart for this model — confirm exact drain quantity with a dealer or the machine's own OMM | Cat TDTO, or an equivalent gear oil meeting the Cat TO-4 specification, is standard for Cat planetary final drives of this type. |
| Grease (remote lubrication points — feeder, auger, and undercarriage bearings; spec only, no reservoir capacity) | N/A — spec only | Cat Multipurpose Grease (Cat MPGM), an NLGI 2 lithium-complex EP grease, for the grouped remote lubrication fittings that service bearings on the feeder, auger, and undercarriage. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar AP-1055D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the AP-1055D beyond the schedule
Predictive Maintenance & Fluid Analysis
Pull engine oil through the quick-connect sampling ports built into the AP-1055D's service panels rather than the sump, and run S·O·S analysis on the C7 ACERT's oil to catch HEUI injector or turbocharger wear before it surfaces as a fault code on the EMS-III display. Sample hydraulic oil to track wear in the dual-path propel pumps and electronic displacement controls, and watch coolant condition closely, since the shunt-style cooling system's high-capacity variable-speed fan can mask early overheating trends.
Corrective & Common Repairs
Most field repairs on the AP-1055D center on the material handling system: outboard feeder drive chains and motors, gateless feeder speed sensors, and the independently driven Ni-Hard hemi-screw augers all see abrasive wear from mix contact. On Mobil-trac machines, check the friction drive wheel and belt-tensioning accumulator if tracking drifts; on steel-track machines, inspect the quad rear bogey and track rails. Pull ADEM A4 fault codes with Cat Electronic Technician before chasing propel or steering complaints tied to the electronic displacement controls.
Overhaul & Rebuild Points
Schedule the C7 ACERT's top-end and major overhaul off fuel consumption and oil-analysis trends rather than a fixed hour number, since paving load factor swings wear rates. Expect turbocharger, HEUI injector, and crankshaft vibration damper work at major overhaul. Undercarriage rebuilds differ by configuration: Mobil-trac machines eventually need belt and mid-wheel replacement, while steel-track machines wear through track rollers, bogey rollers, and bonded pads. Auger hemi-screw segments and feeder drag pans are the other common wear-out replacement points.
Seasonal & Environment Servicing
On cold starts, give the electric-heat AS-2301 or Extend-A-Mat screed its full warm-up cycle -- about 30 minutes to 122°C (220°F) when ambient is at or above 22°C (40°F) -- before paving, since a cold plate telegraphs mat defects. In hot climates, keep the high-capacity radiator and variable-speed fan free of asphalt dust so on-demand cooling can keep pace. Run the ventilation system's exhaust fan to clear auger-chamber fumes, and use the optional washdown system daily to keep asphalt buildup off feeders, augers, and the undercarriage.
AP-1055D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 132-7165 | Filter Element As-Air | Air intake service | Check fitment → |
| 077-5232 | Filter Element-Breather | Hydraulic service | Check fitment → |
| 054-1719 | Filter Element As-Oil | Hydraulic service | Check fitment → |
| 077-6325 | Kit-Seal | Hydraulic service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
AP-1055D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| MID 030 - CID 0096 (FMI 03) | Fuel level sender circuit voltage above normal | Corroded or damaged connector at the fuel level sender, sender signal wire shorted to a voltage source, or a failed sender | Check the sender connector and wiring for damage or corrosion, verify sender resistance against spec, replace the sender if the harness checks out good |
| MID 030 - CID 0248 (FMI 02) | Cat Data Link signal erratic, intermittent, or incorrect | Loose or corroded data link connector, chafed harness shorting the data link to ground or battery, or an open data link circuit between modules | Inspect data link connectors and harness routing for damage, check for proper termination resistance, reseat connectors at each module before replacing harness sections |
| MID 030 - CID 0263 (FMI 03/04) | Digital sensor power supply circuit voltage high (03) or low (04) | Shorted sensor supply wiring, overloaded shared sensor supply circuit from too many sensors drawing current, or a failed regulator inside the monitor module | Disconnect sensors fed by this supply one at a time to isolate the short, check supply voltage at the module connector, repair or replace the offending sensor or harness branch |
| MID 030 - CID 0271 (FMI 05/06) | Action alarm output circuit open (05) or shorted (06) | Open circuit to the alarm/horn relay, blown fuse in the alarm circuit, or a shorted relay coil | Check the alarm circuit fuse and relay, verify continuity from the monitor module to the alarm device, replace the relay or repair the open wire |
| MID 030 - CID 0324 (FMI 03/05/06) | Warning lamp (action) driver circuit voltage high, open, or shorted | Burned-out warning lamp bulb, open wire to the lamp, or a shorted lamp circuit pulling excess current | Check the warning lamp bulb and socket, trace the circuit for an open or short, repair wiring and confirm the lamp illuminates during the monitor's power-up lamp check |
| MID 030 - CID 0600 (FMI 04) | Hydraulic oil temperature sensor circuit voltage low | Grounded signal wire, failed sensor, or a poor ground connection at the sensor pigtail | Check sensor wiring for a pinched or grounded wire, test sensor resistance at operating temperature against spec, replace the sensor if wiring is good |
| MID 030 - CID 0650 (FMI 11) | Harness/cable code not recognized or failure mode not identifiable | Machine harness not matched to the installed monitor software configuration, or a coding plug/resistor circuit not read correctly | Verify the monitor's machine configuration parameters against the installed harness, reflash or reconfigure the monitor with Cat Electronic Technician if the mismatch persists |
| MID 030 - CID 0819 (FMI 02) | Display data link signal erratic, intermittent, or incorrect | Loose display connector, chafed harness between the monitor and the operator display, or electrical noise on the display data link | Reseat the display connector, inspect the display harness for chafe points, replace the harness segment if the fault repeats after reseating connectors |
| MID 036 - CID 0110 (FMI 00) | Engine coolant temperature above normal, most severe level | Low coolant level, plugged radiator core or blocked airflow, failed water pump, or a stuck thermostat | Shut engine down safely, check coolant level and look for leaks, clear debris from the radiator, verify fan and thermostat operation before restarting |
| MID 036 - CID 0100 (FMI 01) | Engine oil pressure below normal, most severe level | Low engine oil level, plugged oil filter, worn oil pump, or a failed oil pressure sensor | Shut engine down immediately, check oil level and condition, inspect for external leaks, verify sensor reading against a mechanical gauge before returning to service |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
AP-1055D attachments & work tools
Screed base and extensions
Runs the AS2301 Vers-A-Mat screed. Front-mount bolt-on extenders add width in fixed steps (about 50 mm/2 in per side) and rear-mount or hydraulic telescoping extension packages step paving width up further. Base screed spans roughly 3-5.5 m (10-18 ft); with extension packages fitted, overall paving width range for the machine runs about 2.4-7.4 m (8-24 ft), varies by extension package fitted.
Screed heating
Main screed plates and the bolt-on side extensions use electric plate heating rather than fuel-fired burners, so the extenders heat evenly with the main deck. Electric heat avoids open-flame fumes, useful for enclosed or tunnel paving work.
Compaction (tamper bar / vibratory) strike-off
Screed is ordered with a strike-off configuration: vibratory-only or vibratory-plus-tamper-bar. Tamper bar setup tucks mix under the plates ahead of rolling to pre-set density; exact stroke and speed settings vary by screed configuration ordered, verify with dealer for the specific unit.
Undercarriage / track belt
Standard undercarriage is the Mobil-Trac rubber belt system with hydraulic auto-tensioning (no manual adjustment). Belt is offered in chevron tread, for traction on loose or uneven base, or smooth tread, to protect finished mat and curb lines; both tread options are documented for this model.
Hopper and material feed
Front hopper has independent left/right hopper wings feeding left/right augers ahead of the screed, sized for typical dump-truck entry width. Feeder rate is regulated by feeder sensors, offered as contact or sonic (non-contact) sensor types, with a sonic averaging beam option for smoothing sensor input.
Grade and slope control
Machine accepts automatic grade control using contact-type or sonic (non-contact) grade/slope sensors on the tow points and screed. Factory-side ties into Cat's grade control provisioning; third-party grade-control systems are also commonly fitted to this model in the field.
Guarding
Conveyor bed plates and chain guards cover the drivetrain and material-delivery conveyors for operator safety and lower-cost wear-part replacement. Screed walkways and handrails are standard guarding for operator positions along the screed.
Extension mounting method
Narrow-step width changes use bolt-on push-pin extension plates on the screed ends. Wider continuous adjustment uses hydraulic telescoping extension frames, which run off the screed's own extend/retract hydraulic circuit rather than a separate add-on kit.
All AP-1055D assemblies by section
Every catalogued assembly group for the Caterpillar AP-1055D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
233-2784 Aftercooler Gp -Air
| 23***82 | Sleeve-Rubber | 4 |
| 23***84 | Aftercooler Group; -Air | 1 |
231-8007 Air Cleaner Gp
| 18***87 | Air Cleaner Group | 1 |
| 1P***86 | Adapter | 1 |
| 1S***37 | Cap As-Air Cleaner | 1 |
310-9669 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
183-8087 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
288-0973 Cover Gp-Air Inlet -Starting Aid Heater
| 24***95 | Insulator; (Air Inlet Heater) | 1 |
| 28***73 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
189-8780 Cover Gp-Air Inlet -Includes Heater
| 18***80 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 28***73 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
294-7675 Cover Gp-Air Inlet -Starting Aid Heater
| 24***95 | Insulator; (Air Inlet Heater) | 1 |
| 29***75 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
222-7970 Elbow Gp-Air Inlet
| 15***09 | Elbow; (Air Inlet) | 1 |
| 1U***46 | Sealant (For Locations A) | 1 |
| 22***70 | Elbow Group-Air Inlet | 1 |
231-8008 Exhaust Gp-Flexible
| 06***93 | Clamp-Tubing | 1 |
| 1W***31 | Clamp-Band; -Turbo Exhaust-Exhaust | 1 |
| 23***08 | Exhaust Group-Flexible | 1 |
219-5840 Manifold Gp-Exhaust
| 21***64 | Manifold-Exhaust; (End) | 2 |
| 21***40 | Manifold Group-Exhaust | 1 |
| 21***55 | Manifold-Exhaust; (Center) | 1 |
200-4508 Manifold Gp-Exhaust
| 17***98 | Bolt-Flange Head; (M10x1.5-Thd) | 12 |
| 18***72 | Spacer; (11x16x35-mm Thk) | 12 |
| 20***08 | Manifold Group-Exhaust; (Exhaust) | 1 |
151-0864 Plug Gp-Air Inlet Manifold
| 15***64 | Plug Group-Air Inlet Manifold | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 9S***05 | Plug-O-Ring; (Straight Thread O-Ring) | 1 |
231-8010 Shield Gp-Manifold
| 23***10 | Shield Group-Manifold | 1 |
| 24***73 | Insulation | 1 |
| 5P***25 | Lockwire; (110 Dm-Sold By The Meter) | 0 |
250-7699 Turbocharger Gp
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 15***72 | Clamp As; (Compressor) | 1 |
| 16***63 | Clamp | 2 |
201-9635 Turbocharger Gp
| 20***35 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
| 7C***31 | Gasket-Turbocharger | 1 |
281-4202 Turbocharger Gp
| 25***99 | Turbocharger Group | 1 |
| 25***24 | Sleeve; (46-cm) | 0 |
| 28***02 | Turbocharger Group | 1 |
197-4998 Turbocharger Gp -Basic
| 13***24 | Plate-Clamp; (Turbine)(Turbine) | 2 |
| 15***72 | Clamp As; (Compressor) | 1 |
| 16***63 | Clamp | 2 |
Basic Engine
110-0361 Belt Tensioner Gp
| 11***61 | Belt Tensioner Group | 1 |
| 13***42 | Belt Tightener; (Auxiliary Drive) | 1 |
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 1 |
212-4289 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 21***88 | Camshaft As | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
222-5947 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 3 |
| 17***67 | Spacer; (8.8x16x10-mm Thk)(Marked X) | 8 |
| 1U***46 | Sealant (For Locations A) | 0 |
211-9120 Cover Gp-Front Housing
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
| 13***22 | Stud | 2 |
| 16***76 | Cover As-Front | 1 |
172-8732 Cover Gp-Front Housing
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 17***32 | Cover Group-Front Housing | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
118-1727 Cover Gp-Front Housing -Accessory Drive
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 4W***26 | Cover | 1 |
261-3722 Cover Gp-Valve Mechanism
| 09***49 | Bolt; (M8x1.25x40-mm) | 13 |
| 22***31 | Cap As-Filler; (Engine Oil) | 1 |
| 26***22 | Cover Group-Valve Mechanism | 1 |
210-5590 Crankshaft Gp
| 10***08 | Bearing-Main; (Standard) | 6 |
| 14***62 | Bearing; (0.25mm Undersize) | 0 |
| 14***64 | Bearing; (0.5mm Undersize) | 0 |
221-4482 Cylinder Block Gp
| 1W***07 | Sleeve | 2 |
| 22***82 | Cylinder Block Group | 1 |
| 30***41 | Cylinder Block Group | 1 |
263-3774 Cylinder Block Gp
| 26***74 | Cylinder Block Group | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 14 |
| 7E***68 | Cap-Crankshaft Bearing | 7 |
305-8141 Cylinder Block Gp
| 10***04 | Sleeve-Cylinder | 0 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
| 26***74 | Cylinder Block Group | 1 |
314-4184 Cylinder Head As
| 22***00 | Sleeve-Injector | 6 |
| 23***85 | Insert-Valve Seat; (Standard)(Exhaust) | 6 |
| 26***57 | Insert-Valve Seat; (Standard)(Inlet) | 12 |
219-5849 Cylinder Head Gp
| 13***95 | Gasket-Cylinder Head | 1 |
| 13***52 | Bolt-12 Point Head; (M20x2.5x170mm) | 1 |
| 14***89 | Fastener Group-Cylinder Head | 14 |
300-9550 Cylinder Head Gp
| 13***83 | Retainer-Spring | 6 |
| 13***15 | Seat-Valve Spring | 6 |
| 13***18 | Spring-Valve; (Exhaust) | 6 |
219-5847 Cylinder Head Gp
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 21***47 | Cylinder Head Group | 1 |
241-4101 Damper Gp
| 16***21 | Damper Assem. | 1 |
| 22***21 | Spacer; (101.5x167x8-mm Thk) | 1 |
| 24***01 | Damper Group | 1 |
246-1571 Drain Gp-Engine Oil
| 16***35 | Plug As | 1 |
| 20***28 | Hose As | 1 |
| 24***71 | Drain Group-Engine Oil | 1 |
231-8006 Drive & Mtg Gp-Pump
| 09***19 | Plug-Pipe | 1 |
| 14***12 | Adapter As | 2 |
| 14***81 | Elbow Group | 1 |
267-6486 Drive Gp-Accessory -Hydraulic Fan Pump
| 13***19 | Seal-Integral; (Integral) | 1 |
| 26***86 | Drive Group-Accessory; -Hydraulic Fan Pump | 1 |
| 3E***68 | Seal-Lip Type | 1 |
277-0640 Drive Gp-Pump
| 27***40 | Kit-Seal; (Pump Drive) | 1 |
| 27***41 | Kit-Bearing | 1 |
| 27***40 | Drive Group-Pump | 1 |
258-8723 Fastener Gp-Cylinder Head
| 22***44 | Clip | 3 |
| 24***00 | Spring | 11 |
| 25***23 | Fastener Group-Cylinder Head; -Valve Cover Base | 1 |
213-1630 Fastener Gp-Front Cover
| 21***30 | Fastener Group-Front Cover | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 12 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 2 |
116-4556 Fastener Gp-Front Housing
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***36 | Bolt; (M12x1.75x70-mm) | 6 |
113-6170 Fastener Gp-Lifting -Engine, Rear
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
| 8T***36 | Capscrew; (Hex Hd) (M10 X 1.50 X 25l Gr 10.9) | 3 |
186-5892 Flywheel Gp
| 18***92 | Flywheel Group | 1 |
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
273-2716 Flywheel Gp
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
| 27***16 | Flywheel Group | 1 |
205-1321 Gear Gp-Front
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
| 11***19 | Plate-Retaining | 1 |
132-2106 Housing Gp-Flywheel
| 13***06 | Housing Group-Flywheel | 1 |
| 6V***42 | Bolt (M10x1.50x40mm) | 2 |
| 7C***33 | Housing-Flywheel | 1 |
165-4446 Housing Gp-Front
| 16***46 | Housing Group-Front | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 24***59 | Housing-Front | 1 |
139-4081 Lifter Gp-Valve -Mechanism
| 13***81 | Lifter Group-Valve; -Mechanism | 1 |
| 13***84 | Spacer; (15.9x24x6-mm Thk) | 2 |
| 13***76 | Shaft As-Lifter | 1 |
153-5417 Lifting Gp-Engine
| 15***17 | Lifting Group-Engine | 1 |
| 15***96 | Plate-Lifting; (Rear) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
169-3130 Mounting Gp-Alternator
| 12***40 | Support-Alternator | 1 |
| 13***82 | Support-Alternator | 1 |
| 16***30 | Mounting Group-Alternator | 1 |
231-8005 Mounting Gp-Engine -Flexible
| 15***12 | Mount As | 2 |
| 23***05 | Mounting Group-Engine; -Flexible | 1 |
| 23***43 | Support As | 2 |
152-5013 Mounting Gp-Fan Drive
| 15***13 | Mounting Group-Fan Drive | 1 |
| 25***23 | Support As; (Fan) | 1 |
| 7E***13 | Bracket | 1 |
226-1799 Pan Gp-Oil -Engine
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 21***36 | Pan; (Oil)(Engine) | 1 |
| 22***99 | Pan Group-Oil; -Engine | 1 |
212-3652 Piston & Rod Gp
| 19***53 | Ring-Piston; (Intermediate) | 1 |
| 19***71 | Pin-Piston | 1 |
| 19***72 | Retainer-Pin | 2 |
159-0303 Plug Gp-Cylinder Block
| 15***03 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 6F***62 | Washer,Flat Transmission Oil Cooler | 1 |
162-8068 Plug Gp-Engine -Engine Oil
| 14***95 | Plug As | 1 |
| 16***68 | Plug Group-Engine; -Oil Gallery | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
121-0802 Plug Gp-Flywheel Housing
| 12***02 | Plug Group-Flywheel Housing | 1 |
| 2P***94 | Plug-Sealing | 1 |
206-2044 Pulley Gp-Crankshaft
| 20***75 | Pulley; (8-Groove) | 1 |
| 20***44 | Pulley Group-Crankshaft | 1 |
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
130-5871 Pulley Gp-Engine
| 12***37 | Support-Compressor | 1 |
| 13***71 | Pulley Group-Engine | 1 |
| 17***23 | Pulley Group-Idler; (8 Groove) | 1 |
143-4927 Pulley Gp-Fan Drive
| 11***38 | Plate; (Thrust) | 1 |
| 14***27 | Pulley Group-Fan Drive | 1 |
| 19***56 | Pulley; (8-Groove) | 1 |
175-3223 Pulley Gp-Idler
| 12***90 | Bolt; (M10x1.5) | 1 |
| 12***91 | Cover-Dust | 1 |
| 12***92 | Pulley As-Idler; (8-Groove) | 1 |
256-3831 Rocker Arm Gp -Exhaust
| 25***31 | Rocker Arm Group; -Exhaust | 1 |
| 25***32 | Rocker Arm As; (Exhaust) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
256-3834 Rocker Arm Gp -Inlet
| 25***34 | Rocker Arm Group; -Inlet | 1 |
| 25***35 | Rocker Arm As; (Inlet) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
122-8929 Seal Gp-Crankshaft
| 12***29 | Seal Group-Crankshaft | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
| 7C***71 | Seal Group-Crankshaft; (Rear)(Rear) | 1 |
235-5528 Valve Mechanism Gp
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
256-3830 Valve Mechanism Gp
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
232-3717 Valve Mechanism Gp
| 13***81 | Lifter Group-Valve; -Mechanism | 3 |
| 21***09 | Bridge-Valve | 6 |
| 23***54 | Clip | 1 |
Braking System
276-4488 Accumulator Gp-Brake -Uncharged
| 11***87 | Screw | 1 |
| 11***88 | Seal; (O-Ring) | 1 |
| 11***89 | Cap | 1 |
276-5455 Accumulator Gp-Brake -Charged
| 11***87 | Screw | 1 |
| 11***88 | Seal; (O-Ring) | 1 |
| 11***89 | Cap | 1 |
193-8539 Pump & Valve Gp-Brake -Manual Release
| 19***39 | Pump & Valve Group-Brake; -Manual Release | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
229-9476 Pump Gp-Hand -Manual Brake Release
| 22***76 | Pump Group-Hand; -Manual Brake Release | 1 |
| 23***43 | Knob | 1 |
| 31***34 | Kit-Seal; (Check Valve) | 1 |
Controls
102-2703 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 1 |
| 10***47 | Gear-Worm | 1 |
| 10***50 | Guide-Bushing | 1 |
8i-0257 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 2 |
| 10***04 | Bolt-Shoulder | 2 |
| 10***24 | Tube As; (Vertical) | 4 |
197-5296 Adjuster Gp-Height
| 10***24 | Tube As; (Vertical) | 4 |
| 10***39 | Key-Square | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
197-9844 Chain Gp-Screed
| 10***87 | Link-Connecting | 1 |
| 19***33 | Link-Offset | 1 |
| 19***44 | Chain Group-Screed | 1 |
197-5288 Crown Gp
| 10***39 | Key-Square | 1 |
| 11***50 | Sprocket; (12-Teeth) | 1 |
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 1 |
120-5898 Crown Gp-Manual
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 05***09 | Bolt-Socket Head | 4 |
| 10***87 | Link-Connecting | 1 |
276-4590 Crown Gp-Power
| 10***01 | .. Roller, Bearing | 2 |
| 10***38 | Pointer | 1 |
| 10***39 | Key-Square | 1 |
196-2503 Jack Gp-Height Adjuster
| 10***64 | Bearing-Thrust | 2 |
| 11***49 | Worm | 1 |
| 19***03 | Jack Group-Height Adjuster | 1 |
102-2699 Jack Gp-Sloper
| 10***99 | Jack Group-Sloper | 1 |
| 10***46 | Gear-Worm | 1 |
| 10***49 | Guide-Bushing | 1 |
277-2004 Motor Gp-Power Adjuster
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
197-9849 Shaft Gp-Drive -Rear
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***45 | Spindle As | 1 |
197-9850 Shaft Gp-Drive -Front
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***12 | Spindle As | 1 |
282-7961 Shaft Gp-Drive -Non-Actuated
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 28***61 | Shaft Group-Drive; -Non-Actuated | 1 |
8i-0214 Sloper Gp-Manual
| 06***93 | Lockwasher-Bearing | 2 |
| 10***99 | Jack Group-Sloper | 2 |
| 10***00 | . Axle, Rod End | 2 |
Cooling System
117-3643 Cooler Gp-Engine Oil
| 11***43 | Cooler Group-Engine Oil | 1 |
| 23***55 | Gasket | 1 |
| 26***43 | Core As-Engine Oil Cooler | 1 |
206-4228 Lines Gp-Water -Engine
| 11***23 | Regulator-Water Temperature; (97-Deg C)(Coolant) | 2 |
| 12***66 | Gasket | 1 |
| 14***95 | Plug As | 1 |
236-4413 Pump Gp-Water
| 11***37 | Pulley; (8-Groove) | 1 |
| 11***25 | Filter; (Water)(Pump) | 1 |
| 12***70 | Shaft Assem. | 1 |
189-2232 Pump Gp-Water
| 14***95 | Plug As | 2 |
| 14***09 | Plug As-Sto | 2 |
| 16***19 | Plug As | 1 |
231-8004 Radiator & Hyd Oil Cooler Gp
| 03***19 | Cap As-Radiator | 1 |
| 06***69 | Stem | 1 |
| 12***02 | Tape; (900-cm) | 0 |
233-2785 Radiator & Hyd Oil Cooler Gp
| 23***85 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 28***98 | Radiator | 1 |
| 28***99 | Cooler-Oil | 1 |
Electrical And Starting System
3e-6328 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
305-5530 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
232-1714 Alternator Gp-Charging
| 12***96 | Pulley-Alternator | 1 |
| 20***99 | Spacer | 1 |
| 20***29 | Belt-Serpentine; (Fan Drive) | 1 |
200-8277 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
316-7251 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
229-4951 Battery & Wiring Gp
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 09***92 | Clip | 1 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 3 |
9w-0742 Block Gp-Junction -Battery
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
| 8C***58 | Block Group-Junction; (Battery) | 1 |
328-9946 Box Gp-Control
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
| 27***74 | Box; (Lh) | 1 |
122-9303 Buffer Gp-Sensor -Material Height
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
122-9309 Buffer Gp-Sensor -5000-Hz Pwm
| 12***09 | Buffer Group-Sensor; -5000-Hz Pwm-Conveyor Speed | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
246-9345 Control & Mtg Gp-Engine Elek
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 14***92 | Stud; (M8x1.25-Thd) | 4 |
| 22***73 | Control Group-Engine Electronic | 1 |
226-7473 Control Gp-Engine Electronic
| 22***73 | Control Group-Engine Electronic | 1 |
| 26***78 | Control Group-Unprogrammed; (Engine) | 1 |
189-0077 Control Gp-Unprogrammed
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 18***77 | Control Group-Unprogrammed; -Tractor Xmsn Control | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
222-2573 Electrical Ar
| 22***73 | Electrical Ar | 1 |
| 22***21 | Wiring Group-Hydraulic Control; -Rear | 1 |
| 22***23 | Wiring Group-Hydraulic Control; -Lh | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
351-8709 Electronics Gp-Machine
| 31***96 | Software Group-Machine | 1 |
| 35***09 | Electronics Group-Machine | 1 |
245-6573 Electronics Gp-Machine
| 24***73 | Electronics Group-Machine | 1 |
| 35***63 | Software Group-Machine | 1 |
| 35***64 | Service Group-Machine | 1 |
351-5791 Electronics Gp-Machine
| 35***11 | Software Group-Machine | 1 |
| 35***91 | Electronics Group-Machine | 1 |
245-6571 Electronics Gp-Monitor
| 24***71 | Electronics Group-Monitor | 1 |
| 28***39 | Software Group-Monitor | 1 |
| 28***40 | Service Group-Monitor | 1 |
142-8333 Fastener Gp-Ground Stud
| 14***33 | Fastener Group-Ground Stud | 1 |
| 5P***70 | Nut-Hard; (M8 X 1.25) | 1 |
| 6V***64 | Washer-Hard; (8.8x25.5x5-mm Thk) | 1 |
234-9176 Generator & Mtg Gp-Hydraulic
| 11***33 | Washer; (11x50x6-mm Thk) | 4 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
230-9656 Generator Ar -Hydraulic
| 23***56 | Generator Ar; -Hydraulic | 1 |
| 23***57 | Pump & Mtg Group-Generator | 1 |
| 23***58 | Valve & Mtg Group-Control; -Generator | 1 |
231-1332 Generator Gp
| 23***32 | Generator Group | 1 |
318-7418 Installation Gp-Communication
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***74 | Cover-Connector; (Wire Router) | 1 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
162-3294 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
241-8232 Lighting Gp-Flood
| 24***69 | Bracket-Light | 2 |
| 24***32 | Lighting Group-Flood | 1 |
| 5D***35 | Grommet | 2 |
198-8284 Lighting Gp-Warning Beacon
| 03***14 | Screw; (10-32x1-In) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
170-7071 Motor Gp-Electric
| 09***47 | Brush As | 1 |
| 11***94 | Bell; (Rear) | 1 |
| 11***61 | Bearing | 2 |
258-6918 Mounting Gp-Sensor -Sonic Sensor
| 25***18 | Mounting Group-Sensor; -Sonic Sensor | 1 |
| 28***75 | Collar | 4 |
| 28***79 | Washer; (32.5x63.5x7.1-mm Thk) | 2 |
306-7612 Panel Gp-Power
| 19***06 | Strip-Terminal | 1 |
| 19***80 | Circuit Breaker As; (20-Ampere)(240-Volt Receptacle) | 1 |
| 19***75 | Receptacle | 2 |
232-6362 Panel Gp-Power -Generator
| 19***06 | Strip-Terminal | 1 |
| 19***80 | Circuit Breaker As; (20-Ampere)(240-Volt Receptacle) | 2 |
| 19***75 | Receptacle | 2 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 33***45 | Radio Group-Communication; -Product Link 121sr | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
145-8519 Sensor Gp-Auger
| 11***24 | Clamp | 2 |
| 14***19 | Sensor Group-Auger | 1 |
| 16***41 | Support-Sensor | 2 |
198-8279 Sensor Gp-Auger
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 11***07 | Knob | 2 |
| 12***44 | Paddle As | 2 |
231-1977 Sensor Gp-Engine
| 16***61 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
| 18***63 | Plug Group | 1 |
297-5355 Sensor Gp-Engine
| 16***61 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
| 18***63 | Plug Group | 1 |
330-6038 Sensor Gp-Engine
| 16***61 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
| 18***63 | Plug Group | 1 |
266-1467 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 26***67 | Sensor Group-Position; -Brake Pedal | 1 |
284-8876 Sensor Gp-Position
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 28***76 | Sensor Group-Position | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
219-2385 Sensor Gp-Position -Auger
| 12***50 | Receptacle As | 1 |
| 12***51 | Bushing | 1 |
| 12***52 | Clamp As-Cable | 1 |
214-4863 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
| 21***63 | Sensor Group-Position; -Rotary-Tc Impeller Clutch, Lh Pedal | 1 |
160-2443 Sensor Gp-Position -Rotary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
168-3551 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***51 | Sensor Group-Position; -Steering | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
195-8090 Sensor Gp-Position -Steering
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 19***90 | Sensor Group-Position; -Steering | 1 |
303-3357 Sensor Gp-Pressure
| 29***60 | Sensor Group-Pressure | 1 |
| 30***57 | Sensor Group-Pressure; -Atmospheric, . Spring | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
276-9067 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***27 | Plug As-Connector; (3-Pin) | 1 |
| 27***19 | Sensor Group-Pressure; (Engine Block Oil Inlet) | 1 |
266-8650 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 26***50 | Sensor Group-Pressure; -Intake Manifold Air | 1 |
| 27***93 | Sensor Group-Pressure; (Water Jacket Outlet) | 1 |
197-8393 Sensor Gp-Pressure
| 16***03 | Sensor Group-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
197-8394 Sensor Gp-Pressure
| 16***05 | Sensor As-Pressure; (Unfiltered Engine Oil) | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
267-1402 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 24***69 | Sensor Group-Pressure | 1 |
| 26***02 | Sensor Group-Pressure; -Injection Actuation | 1 |
236-6220 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 23***20 | Sensor Group-Pressure; -Injection Actuation | 1 |
224-4536 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***27 | Harness As-Sensor; (14-Ga Wire)(Engine Oil Temperature) | 3 |
210-1747 Sensor Gp-Pressure
| 16***04 | Sensor Group-Pressure; (Turbocharger Outlet) | 1 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
236-6221 Sensor Gp-Speed -Engine Timing
| 23***21 | Sensor Group-Speed; -Engine Timing | 1 |
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
197-8392 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 0 |
| 19***92 | Sensor Group-Temperature; -Coolant, Water | 1 |
274-7395 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
197-8391 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 23***80 | Seal-O-Ring | 1 |
234-5012 Sensor Gp-Temperature
| 23***12 | Sensor Group-Temperature; -Coolant, Water | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
| 6V***09 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
234-5013 Sensor Gp-Temperature
| 23***13 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
145-7028 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***28 | Sensor Group-Temperature; -Hydraulic Oil Temp | 1 |
| 15***43 | Sleeve; (2.8-Dm) | 0 |
274-7396 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
| 27***96 | Sensor Group-Temperature; -Engine Coolant | 1 |
231-3949 Starting Aid Gp -Air Inlet Heater
| 11***32 | Wire As | 1 |
| 19***41 | Cover-Terminal | 2 |
| 22***77 | Switch Group-Magnetic; -Air Inlet Heater Relay | 1 |
249-9223 Starting Aid Gp -Wiring
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 13***43 | Boot; (Red)(Red) | 1 |
| 20***77 | Bolt-Flange Head; (M8x1x25-mm) | 2 |
339-7783 Starting Aid Gp-Ether
| 33***14 | Wiring Group-Ether Starting Aid | 1 |
| 33***82 | Starting Aid Group-Ether | 1 |
| 33***83 | Starting Aid Group-Ether | 1 |
339-7782 Starting Aid Gp-Ether
| 13***00 | Clip; (Tab) | 2 |
| 17***69 | Tube; (250 cm) | 0 |
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
207-1541 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***02 | Housing As | 1 |
| 20***41 | Starting Motor Group-Electric | 1 |
132-1418 Starting Motor Gp-Electric
| 10***08 | Bolt (M10x1.5x35mm); (M10x1.5x35-mm) | 3 |
| 13***18 | Starting Motor Group-Electric | 1 |
| 13***30 | Wire As | 1 |
128-5626 Starting Motor Gp-Electric -Cold Weather
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
| 12***26 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
207-1551 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***02 | Housing As | 1 |
| 19***70 | Solenoid As-Starting Motor; (24-Volt)(Starting Motor) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
8n-0694 Switch As-Toggle
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 6T***31 | Nut-Hexagon-(15/32-32 Thd) | 2 |
| 6T***32 | Lockwasher 15.08mm(.59in.)O.D. | 1 |
172-8660 Switch Gp-Liquid Level -Hydraulic Tank
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
223-7577 Switch Gp-Magnetic -Air Inlet Heater
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 20***77 | Bolt-Flange Head; (M8x1x25-mm) | 2 |
241-8368 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
175-2309 Switch Gp-Magnetic -Start Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***81 | Switch As-Magnetic; (Start Relay) | 1 |
175-2308 Switch Gp-Magnetic -Start Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
254-3783 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
167-0138 Switch Gp-Magnetic -Main Relay-Main Power Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
118-3534 Switch Gp-Magnetic -Start Relay
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
| 17***09 | Switch Group-Magnetic; -24-Volt-Start Relay | 1 |
209-5582 Switch Gp-Magnetic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 2 |
258-0883 Switch Gp-Pressure -Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Pressure; -Fuel Filter, Differential-Fuel Filter | 1 |
239-1134 Valve Gp-Ether Starting
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 23***34 | Valve Group-Ether Starting | 1 |
| 35***89 | Filter; (Ether Start) | 1 |
191-2846 Wiring Gp-Console -Auxiliary Steering
| 19***46 | Wiring Group-Console; -Auxiliary Steering | 1 |
| 19***70 | Harness As; (Auxiliary Steering) | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 6 |
198-2714 Wiring Gp-Engine
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
330-6022 Wiring Gp-Engine
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
339-3814 Wiring Gp-Ether Starting Aid
| 17***15 | Strap; (Dual Clamp) | 4 |
| 33***23 | Harness As-Solenoid | 1 |
| 33***14 | Wiring Group-Ether Starting Aid | 1 |
228-9121 Wiring Gp-Hydraulic Control -Rear
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***13 | Receptacle As-Connector; (70-Pin) | 1 |
| 11***18 | Clip | 1 |
228-9123 Wiring Gp-Hydraulic Control -Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***01 | Plate-Face | 2 |
| 11***29 | Cap-Dust | 1 |
228-9125 Wiring Gp-Hydraulic Control -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***01 | Plate-Face | 1 |
| 11***29 | Cap-Dust | 1 |
235-3549 Wiring Gp-Panel
| 13***89 | Clip; (Ladder) | 1 |
| 19***81 | Circuit Breaker As; (35-Ampere)(Generator) | 1 |
| 1M***43 | Grommet | 1 |
229-8249 Wiring Gp-Power Train
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
229-3119 Wiring Gp-Screed -Electric Heat
| 17***65 | Plug As-Connector | 2 |
| 19***99 | Panel Group-Electronic; -Material Height-Lh | 2 |
| 22***19 | Wiring Group-Screed; -Electric Heat | 1 |
229-3118 Wiring Gp-Screed -Diesel Heat
| 19***98 | Panel Group-Electronic; -Material Height-Rh | 1 |
| 19***99 | Panel Group-Electronic; -Material Height-Lh | 1 |
| 22***18 | Wiring Group-Screed; -Diesel Heat | 1 |
235-3547 Wiring Gp-Screed -Electric Heat
| 23***47 | Wiring Group-Screed; -Electric Heat | 1 |
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 4 |
| 28***80 | Harness As-Screed | 1 |
Electrical System
196-1298 Panel Gp-Electronic -Material Height-Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***83 | Relay-Time Delay; (Electric Heat) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
196-1299 Panel Gp-Electronic -Material Height-Lh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 13***48 | Potentiometer As; (Rh Conveyor Speed Dial) | 1 |
Engine Arrangement
223-7844 Engine Ar-Complete
| 11***61 | Belt Tensioner Group | 1 |
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
223-9994 Engine Ar-Core
| 11***43 | Cooler Group-Engine Oil | 1 |
| 16***46 | Housing Group-Front | 1 |
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
222-2576 Installation Ar-Engine
| 22***76 | Installation Ar-Engine | 1 |
| 22***44 | Engine Ar-Complete | 1 |
| 23***04 | Radiator & Hydraulic Oil Cooler Group | 1 |
Feeder Drag And Auger Conveyors
201-5584 Bearing Gp-Auger
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
| 20***84 | Bearing Group-Auger | 1 |
116-9509 Bearing Gp-Auger
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***09 | Bearing Group-Auger | 1 |
106-9718 Bearing Gp-Auger
| 01***41 | Setscrew-Socket | 3 |
| 10***18 | Bearing Group-Auger | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
280-9921 Chain Gp-Conveyor
| 28***21 | Chain Group-Conveyor | 1 |
| 28***79 | Bar-Side | 232 |
| 28***80 | Foam Insulation; 40 X 60 X 644 mm, Bar-Side | 116 |
105-9278 Chain Gp-Conveyor -Rh
| 10***78 | Chain Group-Conveyor; -Rh | 1 |
| 8I***14 | Bar-Side | 58 |
| 8I***15 | Bar-Side | 29 |
107-5892 Chain Gp-Conveyor
| 10***78 | Chain Group-Conveyor; -Rh | 1 |
| 10***92 | Chain Group-Conveyor | 1 |
| 13***56 | Chain Group-Conveyor; -Lh | 1 |
134-3956 Chain Gp-Conveyor -Lh
| 13***56 | Chain Group-Conveyor; -Lh | 1 |
| 8I***14 | Bar-Side | 58 |
| 8I***15 | Bar-Side | 29 |
224-5776 Conveyor & Mtg Gp-Auger
| 09***69 | Bolt | 4 |
| 10***55 | Plate | 1 |
| 11***15 | Step As | 1 |
222-2574 Conveyor Ar-Drag & Auger
| 10***74 | Conveyor Group-Drag | 2 |
| 10***77 | Footshaft Group | 2 |
| 22***74 | Conveyor Ar-Drag & Auger | 1 |
230-5481 Conveyor Gp-Auger
| 10***85 | Plate | 2 |
| 10***91 | Pipe | 2 |
| 10***96 | Plate | 1 |
104-7474 Conveyor Gp-Drag
| 05***20 | Pin-Spring | 58 |
| 10***74 | Conveyor Group-Drag | 1 |
| 12***59 | Bar-Feeder; (Conveyor) | 29 |
224-5778 Drive Gp-Conveyor
| 10***99 | Sprocket As; (12-Teeth) | 2 |
| 13***92 | Key-Square | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
231-2043 Extension Gp-Auger -24-In, Lh
| 23***43 | Extension Group-Auger; -24-In, Lh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
231-2042 Extension Gp-Auger -24-In, Rh
| 23***42 | Extension Group-Auger; -24-In, Rh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
231-3532 Extension Gp-Auger -6-In
| 23***32 | Extension Group-Auger; -6-In | 1 |
| 31***84 | Tube | 2 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 2 |
243-0329 Extension Gp-Auger -18-In
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 23***32 | Extension Group-Auger; -6-In | 1 |
198-8287 Extension Gp-Auger -12-In, Rh
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
199-4206 Extension Gp-Auger -12-In, Lh
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
104-7477 Footshaft Gp
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
224-5777 Guard Gp-Conveyor
| 10***42 | Plate | 2 |
| 12***54 | Screw-Flat Head; (M12x1.75x35-mm) | 62 |
| 19***32 | Guard As | 4 |
230-9583 Hydraulic Ar-Conveyor
| 23***83 | Hydraulic Ar-Conveyor | 1 |
| 23***95 | Pump & Mtg Group-Conveyor | 1 |
| 23***96 | Motor & Mtg Group-Conveyor | 1 |
230-9596 Motor & Mtg Gp-Conveyor
| 11***80 | Elbow | 1 |
| 14***72 | Elbow Group | 4 |
| 14***09 | Plug As-Sto | 2 |
341-9466 Planetary Gp-Auger -Conveyor
| 09***92 | Pin-Spring | 2 |
| 13***16 | Kit-Washer; (Planetary) | 1 |
| 13***30 | Plug-Magnetic; (Planetary) | 1 |
341-9467 Planetary Gp-Conveyor
| 09***92 | Pin-Spring | 2 |
| 23***88 | Pin-Spring | 2 |
| 24***79 | Plug-Magnetic; (Planetary) | 1 |
314-9026 Pump & Mtg Gp-Conveyor
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 14***15 | Connector As | 1 |
| 14***39 | Connector As. | 6 |
230-9595 Pump & Mtg Gp-Conveyor
| 14***15 | Connector As | 1 |
| 14***39 | Connector As. | 5 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
230-3451 Shaft Gp-Feeder Drive
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 4 |
| 10***30 | Bearing-Flange | 2 |
| 10***70 | Key-Square | 2 |
Frame And Body
225-2317 Arm Gp-Drop
| 11***99 | Pin As-Pivot | 2 |
| 13***20 | Shaft | 2 |
| 13***77 | Lockout | 2 |
253-1002 Arm Gp-Drop
| 10***68 | Nipple-Pipe | 2 |
| 11***99 | Pin As-Pivot | 2 |
| 25***02 | Arm Group-Drop | 1 |
233-3565 Arm Gp-Tow
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 19***19 | Roller | 4 |
| 19***20 | Shaft | 2 |
315-1101 Brace Gp
| 1A***68 | Nut | 1 |
| 31***01 | Brace Group | 1 |
| 31***02 | Plate As | 1 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
232-1107 Bracket Gp-Support
| 22***51 | Bracket | 1 |
| 23***07 | Bracket Group-Support | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
239-5628 Carriage Gp-Extender
| 18***25 | Scraper; (Brass) | 4 |
| 19***57 | Scraper As | 4 |
| 1A***68 | Nut | 6 |
232-3353 Cover Gp-Access
| 11***76 | Cover | 2 |
| 11***77 | Cover | 2 |
| 20***04 | Plate | 2 |
233-1743 Cover Gp-Engine & Platform
| 10***56 | Rod; (Prop) | 1 |
| 11***77 | Bumper-Rubber | 12 |
| 14***03 | Screw-Button Head; (M10x1.5x30-mm) | 24 |
8i-0292 Deflector Gp
| 10***31 | Nut-Spring | 8 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 8 |
| 16***59 | Plate As; (Lh) | 1 |
197-5297 Deflector Gp
| 16***24 | Rod-Threaded | 4 |
| 16***25 | Rod-Threaded | 4 |
| 16***26 | Turnbuckle | 4 |
215-7553 Extension Gp-Main Frame
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
231-1983 Extension Gp-Main Frame -24-In
| 10***90 | Extension As | 1 |
| 23***83 | Extension Group-Main Frame; -24-In | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
231-1982 Extension Gp-Main Frame -12-In
| 10***88 | Extension As | 1 |
| 23***82 | Extension Group-Main Frame; -12-In | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
241-9358 Extension Gp-Main Frame -Adjustable Height
| 12***73 | Extension As | 2 |
| 12***79 | Bar | 2 |
| 12***20 | Shim; (1.65-mm Thk) | 4 |
222-2609 Frame Gp-Main
| 22***09 | Frame Group-Main | 1 |
| 22***68 | Frame As | 1 |
| 24***76 | Plate As | 1 |
286-9444 Frame Gp-Screed
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
197-5287 Frame Gp-Screed
| 10***68 | Grip-Handle | 2 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 6 |
| 16***62 | Cover-Inspection | 2 |
120-5905 Frame Gp-Screed
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
145-9438 Gate Gp-End
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***68 | Grip-Handle | 2 |
| 10***70 | Support As | 2 |
216-6989 Gate Gp-End
| 10***68 | Grip-Handle | 2 |
| 10***35 | Support As | 2 |
| 10***09 | Chain; (14-In Each) | 0 |
199-4196 Guide Gp-Steering
| 03***74 | Keeper | 1 |
| 10***39 | Tube As | 1 |
| 10***78 | Block | 1 |
273-9969 Guide Gp-Steering
| 19***54 | Chain | 1 |
| 27***69 | Guide Group-Steering | 1 |
| 27***65 | Bar | 1 |
230-5042 Hopper Gp
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 10***23 | Round | 2 |
| 12***35 | Flashing | 2 |
233-1745 Lines Gp-Grease
| 14***20 | Connector As | 2 |
| 14***85 | Elbow; (45°) | 8 |
| 14***89 | Elbow As | 6 |
195-2382 Lock Gp-Transport
| 19***82 | Lock Group-Transport | 1 |
| 25***97 | Bar | 2 |
| 8T***75 | Bolt; (M16x2x90-mm) | 2 |
245-9079 Plate Gp-Screed -Electric Heat, 12-In
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 1 |
245-9078 Plate Gp-Screed -Electric Heat, 28-In
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 2 |
245-9080 Plate Gp-Screed -Electric Heat, 24-In
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 2 |
245-9077 Plate Gp-Screed -Electric Heat, 12-In
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 1 |
222-2577 Structural Ar
| 19***82 | Lock Group-Transport | 1 |
| 22***77 | Structural Ar | 1 |
| 23***65 | Arm Group-Tow | 1 |
231-1956 Support Gp-Frame
| 10***89 | Brace Group | 1 |
| 23***56 | Support Group-Frame | 1 |
| 23***07 | Bracket Group-Support | 1 |
233-1744 Suppression Gp-Sound
| 20***48 | Panel-Foam | 1 |
| 23***44 | Suppression Group-Sound | 1 |
| 23***88 | Foam | 1 |
292-9232 Ventilation Gp-Paver
| 10***25 | Hinge Assem. | 1 |
| 15***02 | Gauge-Differential Pressure; (Paver Ventilation) | 1 |
| 15***03 | Bracket-Gauge | 1 |
235-0361 Ventilation Gp-Paver
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***04 | Housing As-Blower | 1 |
Fuel System
233-5034 Control Gp-Decelerator
| 09***12 | Spring | 2 |
| 11***18 | Clip | 2 |
| 16***43 | Bolt; (M10x1.5x60-mm) | 2 |
226-7515 Filter & Lines Gp-Fuel
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
268-1835 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 1 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
295-1410 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
328-2585 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
8l-3471 Joint As-Tube
| 8L***71 | Joint As-Tube | 1 |
| 9X***36 | Seal | 2 |
231-8009 Lines Gp-Fuel
| 10***09 | Cap As-Filler; (Fast Fill Fuel) | 1 |
| 10***05 | Plate | 2 |
| 12***42 | Hose As | 1 |
191-0461 Lines Gp-Injector Hyd Pump
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
| 20***80 | Hose As | 1 |
247-7116 Plug Gp-Fuel Tank
| 14***11 | Plug Group | 2 |
| 24***16 | Plug Group-Fuel Tank | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
222-5900 Pump & Mtg Gp-Unit Inj Hyd
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 22***00 | Pump & Mtg Group-Unit Inj Hydraulic | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
192-4302 Pump Gp-Fuel
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
| 13***76 | Strainer; (Fuel Pump) | 1 |
222-5958 Pump Gp-Fuel Injection
| 22***58 | Pump Group-Fuel Injection | 1 |
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 29***10 | Injector Group-Fuel | 1 |
268-1839 Pump Gp-Fuel Injection
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 26***39 | Pump Group-Fuel Injection | 1 |
| 32***85 | Injector Group-Fuel | 1 |
312-0677 Pump Gp-Unit Injector Hyd
| 16***36 | Bolt-Socket Head; (M5x0.8x18-mm) | 3 |
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
295-4777 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
254-4357 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
319-0677 Pump Gp-Unit Injector Hyd
| 15***36 | Cartridge | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 1F***60 | Washer Roll-Over Group To Deck | 1 |
304-0677 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
205-1306 Regulator Gp-Fuel Pressure
| 19***38 | Elbow Assem. | 0 |
| 20***06 | Name-Plate (Portuguese), Regulator Group-Fuel Pressure | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
232-0343 Regulator Gp-Fuel Pressure
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
149-2683 Separator Gp-Water
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
Grade References
109-5627 Leveler Gp -40-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5625 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 7 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5622 Leveler Gp -40-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5624 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5628 Leveler Gp -30-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5626 Leveler Gp -Outboard
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5623 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
Hydraulic System
209-2659 Accumulator Gp-Hydraulic -Charged
| 20***59 | Accumulator Group-Hydraulic; -Charged | 1 |
| 20***72 | Film-Warning; (Accumulator) | 1 |
209-4549 Accumulator Gp-Hydraulic -Uncharged
| 13***64 | Cap | 1 |
| 13***65 | Screw | 1 |
| 13***66 | Seal | 1 |
077-3951 Cap Gp-Hydraulic Oil Filler
| 07***51 | Cap As-Filler Breather | 1 |
| 07***32 | Filter Element-Breather; (Hydraulic Oil Filter) | 1 |
| 07***26 | Gasket | 2 |
236-2087 Cover Gp -Without Ventilation
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
| 20***34 | Plate-Cover | 1 |
| 23***87 | Cover Group; -Without Ventilation | 1 |
236-2088 Cover Gp -Without Generator
| 14***11 | Plug Group | 1 |
| 16***16 | Plug As | 1 |
| 23***88 | Cover Group; -Without Generator | 1 |
230-9611 Cylinder & Mtg Gp-Auger
| 14***68 | Elbow Group | 4 |
| 17***51 | Pin-Clevis | 4 |
| 20***75 | Cylinder Group-Hydraulic; -Auger Hoist, Rh | 1 |
230-9608 Cylinder & Mtg Gp-Hopper
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 10***44 | Elbow | 1 |
| 13***06 | Pin As | 2 |
230-9609 Cylinder & Mtg Gp-Screed Hoist
| 14***74 | Elbow As | 2 |
| 16***88 | Elbow; (90-Deg) | 1 |
| 17***51 | Pin-Clevis | 4 |
195-2881 Cylinder & Mtg Gp-Tow Point
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 14***74 | Elbow As | 4 |
| 17***51 | Pin-Clevis | 4 |
135-0217 Cylinder Gp-Hydraulic -Extender
| 03***39 | Ring-Back-Up | 1 |
| 12***75 | Ring-Wear | 2 |
| 13***17 | Cylinder Group-Hydraulic; -Extender | 1 |
135-0220 Cylinder Gp-Hydraulic -Hopper
| 13***20 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 13***21 | Kit-Seal; (Hopper Cylinder) | 1 |
| 5E***32 | Ring | 1 |
197-9766 Cylinder Gp-Hydraulic -Slope
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 14***61 | Plug | 2 |
| 14***62 | Seal-Washer | 2 |
262-2832 Cylinder Gp-Hydraulic -Screed Hoist
| 23***05 | Kit-Seal; (Screed Hoist Cylinder) | 1 |
| 24***73 | Ring-Retaining | 1 |
| 26***32 | Cylinder Group-Hydraulic; -Screed Hoist | 1 |
278-0616 Cylinder Gp-Hydraulic
| 20***62 | Kit-Seal; (Extender Cylinder) | 1 |
| 27***16 | Cylinder Group-Hydraulic | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
203-4275 Cylinder Gp-Hydraulic -Auger Hoist, Rh
| 20***75 | Cylinder Group-Hydraulic; -Auger Hoist, Rh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 24***14 | Kit-Seal; (Auger Hoist) | 1 |
203-4276 Cylinder Gp-Hydraulic -Auger Hoist, Lh
| 20***76 | Cylinder Group-Hydraulic; -Auger Hoist, Lh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 25***75 | Kit-Seal; (Auger Hoist) | 1 |
165-4654 Cylinder Gp-Hydraulic
| 16***54 | Cylinder Group-Hydraulic | 1 |
| 20***62 | Kit-Seal; (Extender Cylinder) | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
195-2884 Cylinder Gp-Hydraulic -Tow Point
| 19***84 | Cylinder Group-Hydraulic; -Tow Point | 1 |
| 23***82 | Kit-Seal; (Tow Point Cylinder) | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
230-9601 Filter & Mtg Gp-Hydraulic -Vibratory
| 14***41 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***82 | Elbow As | 1 |
230-9594 Filter & Mtg Gp-Hydraulic -Charge, Propel
| 14***82 | Elbow As | 3 |
| 15***32 | Elbow As | 1 |
| 16***31 | Elbow As | 2 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 17***15 | Filter Group-Oil; -Hydraulic Tank | 1 |
196-7614 Filter Gp-Oil -Hydraulic
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 19***14 | Filter Group-Oil; -Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
192-0717 Filter Gp-Oil -Hydraulic
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 19***17 | Filter Group-Oil; -Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
236-2084 Hydraulic Ar -Truck Hitch
| 23***23 | Valve & Mtg Group-Truck Hitch | 1 |
| 23***82 | Lines Group-Truck Hitch | 1 |
| 23***84 | Hydraulic Ar; -Truck Hitch | 1 |
222-2575 Hydraulic Ar
| 22***75 | Hydraulic Ar | 1 |
| 23***82 | Hydraulic Ar-Propel | 1 |
| 23***83 | Hydraulic Ar-Conveyor | 1 |
230-9585 Hydraulic Ar-Auxiliary
| 19***81 | Cylinder & Mtg Group-Tow Point | 1 |
| 23***85 | Hydraulic Ar-Auxiliary | 1 |
| 23***02 | Pump & Mtg Group-Auxiliary | 1 |
230-9586 Hydraulic Ar-Fan
| 23***86 | Hydraulic Ar-Fan | 1 |
| 23***22 | Lines Group-Hydraulic Fan | 1 |
| 23***23 | Pump & Mtg Group-Hydraulic Fan | 1 |
230-9584 Hydraulic Ar-Vibratory
| 23***84 | Hydraulic Ar-Vibratory | 1 |
| 23***99 | Valve & Mtg Group-Vibratory; -Vibratory Bypass | 1 |
| 23***00 | Lines Group-Vibratory | 1 |
230-9618 Lines Gp-Brake & Shift
| 10***05 | Plate | 2 |
| 14***67 | Elbow Group; (Each Includes) | 2 |
| 15***28 | Union | 1 |
230-9598 Lines Gp-Conveyor
| 11***79 | Hose As | 1 |
| 11***97 | Hose As | 1 |
| 12***55 | Hose As | 1 |
230-9616 Lines Gp-Cylinder -Auger Hoist
| 10***03 | Plate-Cover | 5 |
| 10***05 | Plate | 2 |
| 11***56 | Hose As | 1 |
311-4879 Lines Gp-Extender
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***36 | Elbow As. | 2 |
| 16***32 | Pin | 2 |
112-3469 Lines Gp-Extender
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 11***69 | Lines Group-Extender | 1 |
| 13***17 | Cylinder Group-Hydraulic; -Extender | 2 |
197-5289 Lines Gp-Extender
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 14***18 | Connector As | 2 |
| 14***74 | Elbow As | 2 |
231-9066 Lines Gp-Generator Drive
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 14***77 | Hose Assem. | 1 |
| 14***18 | Connector As | 1 |
230-9621 Lines Gp-Grade & Slope
| 10***05 | Plate | 4 |
| 12***62 | Hose Assem. | 2 |
| 14***30 | Hose As | 4 |
230-9615 Lines Gp-Hopper
| 10***05 | Plate | 8 |
| 10***06 | Plate As | 2 |
| 11***18 | Hose Assem. | 3 |
230-9622 Lines Gp-Hydraulic Fan
| 10***21 | Hose As | 1 |
| 11***76 | Hose As | 1 |
| 14***12 | Reducer As-Orfs | 1 |
235-4846 Lines Gp-Paver Ventilation
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***17 | Reducer As-Orfs | 1 |
| 17***15 | Strap; (Dual Clamp) | 1 |
230-9619 Lines Gp-Pump -Auxiliary
| 14***44 | Plate-Retainer | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
| 17***15 | Strap; (Dual Clamp) | 1 |
230-9620 Lines Gp-Return
| 19***07 | Bolt-Stacking; (M6x1x73-mm) | 2 |
| 1P***82 | Flange-Half | 2 |
| 23***20 | Lines Group-Return | 1 |
230-9613 Lines Gp-Screed
| 10***05 | Plate | 4 |
| 14***09 | Hose As | 1 |
| 14***66 | Elbow Group | 2 |
311-1959 Lines Gp-Slope
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***84 | Pin As | 4 |
| 14***13 | Adapter Group | 1 |
197-5285 Lines Gp-Slope
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***84 | Pin As | 4 |
230-9617 Lines Gp-Track Tension
| 11***37 | Seat Cushion Kit, Hose As | 2 |
| 17***15 | Strap; (Dual Clamp) | 2 |
| 21***56 | Hose As | 2 |
236-2082 Lines Gp-Truck Hitch
| 10***03 | Plate-Cover | 3 |
| 10***05 | Plate | 1 |
| 13***18 | Tube As | 2 |
230-7543 Lines Gp-Vibratory
| 10***05 | Plate | 7 |
| 14***09 | Adapter As | 2 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
311-4878 Lines Gp-Vibratory
| 07***84 | Clamp | 3 |
| 08***86 | Clamp | 2 |
| 11***60 | Strap | 1 |
112-3467 Lines Gp-Vibratory
| 07***84 | Clamp | 6 |
| 08***86 | Clamp | 2 |
| 10***84 | Hose As | 1 |
230-9600 Lines Gp-Vibratory
| 14***38 | Elbow | 1 |
| 14***44 | Plate-Retainer | 1 |
| 14***80 | Elbow As | 1 |
233-1870 Manifold Gp-Control -Auxiliary
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***38 | Elbow | 1 |
| 14***63 | Elbow Group | 1 |
230-9605 Manifold Gp-Cooling -Return, Oil Cooler Bypass
| 14***09 | Adapter As | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
| 14***81 | Elbow Group | 1 |
230-9597 Motor & Mtg Gp-Auger
| 11***80 | Elbow | 1 |
| 14***27 | Connector Group | 4 |
| 14***72 | Elbow Group | 4 |
230-9659 Motor & Mtg Gp-Generator
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 15***37 | Elbow Group | 1 |
| 20***92 | Elbow As; (90-Deg) | 1 |
230-9624 Motor & Mtg Gp-Hydraulic Fan
| 14***23 | Connector As. | 2 |
| 14***65 | Elbow | 1 |
| 23***24 | Motor & Mtg Group-Hydraulic Fan | 1 |
190-6466 Motor & Mtg Gp-Propel
| 14***28 | Connector Assem. | 1 |
| 14***81 | Elbow Group | 1 |
| 17***73 | Bolt; (M20x1.5x55-mm) | 4 |
235-4847 Motor & Mtg Gp-Ventilation
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***74 | Elbow As | 1 |
| 15***50 | Elbow As | 1 |
308-2125 Motor Gp-Gear -Vibratory
| 30***25 | Motor Group-Gear; -Vibratory | 1 |
| 31***08 | Kit-Seal | 1 |
235-4849 Motor Gp-Gear -Paver Ventilation
| 23***49 | Motor Group-Gear; -Paver Ventilation | 1 |
| 26***11 | Kit-Seal; (Paver Ventilation Motor) | 1 |
230-9627 Motor Gp-Gear -Hydraulic Fan
| 14***15 | Dowel | 2 |
| 19***10 | Key-Woodruff | 1 |
| 23***27 | Motor Group-Gear; -Hydraulic Fan | 1 |
8i-0721 Motor Gp-Gerotor -Vibratory
| 06***39 | Seal-O-Ring | 1 |
| 16***21 | Kit-Bearing; (Vibratory Motor) | 1 |
| 4D***86 | Seal--Bushing To Selector Valve Group | 1 |
230-9384 Motor Gp-Piston -Conveyor
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
285-2212 Motor Gp-Piston
| 07***53 | Pin; (Spring) | 2 |
| 11***34 | Bolt | 4 |
| 14***16 | Tube | 1 |
190-8789 Motor Gp-Piston -Auger
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
190-6479 Motor Gp-Piston -Propel
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 07***53 | Pin; (Spring) | 2 |
| 11***34 | Bolt | 4 |
227-5104 Motor Gp-Piston -Generator
| 10***78 | Bearing-Roller | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
230-9602 Pump & Mtg Gp-Auxiliary
| 10***20 | Seal-O-Ring | 1 |
| 15***56 | Elbow As | 1 |
| 20***15 | Elbow As | 1 |
230-9657 Pump & Mtg Gp-Generator
| 11***01 | Seal (Rear Pump To Center Pump) | 1 |
| 14***16 | Connector Group | 1 |
| 14***90 | Elbow Group | 1 |
230-9623 Pump & Mtg Gp-Hydraulic Fan
| 14***55 | Elbow As. | 1 |
| 14***29 | Tee As-Orfs | 1 |
| 22***86 | Elbow | 1 |
230-9591 Pump & Mtg Gp-Propel
| 12***88 | Flange-Split | 2 |
| 13***96 | Elbow | 1 |
| 14***09 | Adapter As | 1 |
294-0857 Pump Gp-Gear
| 10***73 | Nut-Track | 1 |
| 13***98 | Seal-Lip Type | 1 |
| 15***33 | Key | 1 |
333-3638 Pump Gp-Gear
| 23***03 | Kit-Seal; (Gear Pump)(Charge, Conveyor) | 1 |
| 33***38 | Pump Group-Gear | 1 |
232-1533 Pump Gp-Gear -Charge, Conveyor
| 23***33 | Pump Group-Gear; -Charge, Conveyor | 1 |
| 23***03 | Kit-Seal; (Gear Pump)(Charge, Conveyor) | 1 |
245-1145 Pump Gp-Gear -Hydraulic Fan
| 10***73 | Nut-Track | 1 |
| 13***98 | Seal-Lip Type | 1 |
| 15***33 | Key | 1 |
230-9550 Pump Gp-Piston -Generator
| 00***54 | Cup-Roller Bearing | 1 |
| 03***48 | Cone-Bearing | 1 |
| 1P***72 | Cup-Roller Bearing | 1 |
230-9377 Pump Gp-Piston -Propel, Rh
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 09***39 | Washer; (8.33x15x2.12-mm Thk) | 1 |
230-9375 Pump Gp-Piston -Propel, Lh
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 09***39 | Washer; (8.33x15x2.12-mm Thk) | 1 |
230-9383 Pump Gp-Piston -Auger Conveyor, Drag Conveyor, Rh
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 07***53 | Pin; (Spring) | 2 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 2 |
333-7607 Pump Gp-Piston
| 33***07 | Pump Group-Piston | 1 |
230-9382 Pump Gp-Piston -Auger Conveyor, Drag Conveyor, Lh
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 07***53 | Pin; (Spring) | 2 |
| 11***30 | Link | 2 |
317-9349 Pump Gp-Piston -Propel
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 09***39 | Washer; (8.33x15x2.12-mm Thk) | 1 |
317-9348 Pump Gp-Piston
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 09***39 | Washer; (8.33x15x2.12-mm Thk) | 1 |
230-9385 Pump Gp-Piston -Auxiliary
| 00***91 | Cup-Roller Bearing | 1 |
| 07***35 | Kit-Bearing; (Auxiliary Pump) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
333-7609 Pump Gp-Piston
| 33***09 | Pump Group-Piston | 1 |
230-9587 Tank & Mtg Gp-Hydraulic
| 03***06 | Seal (Use As Required) | 1 |
| 10***05 | Plate | 1 |
| 12***13 | Film-Instruction; (Hydraulic Oil Level) | 1 |
230-9588 Tank Gp-Hydraulic
| 07***51 | Cap As-Filler Breather | 1 |
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***14 | Seal-O-Ring (Id=9.80mm) | 4 |
230-9603 Valve & Mtg Gp-Auxiliary
| 09***86 | Coupling | 1 |
| 14***25 | Connector As. | 2 |
| 14***28 | Connector Assem. | 1 |
230-9606 Valve & Mtg Gp-Control -Track Tension
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Clip | 2 |
| 14***63 | Coupler As-Quick Connect | 2 |
230-9658 Valve & Mtg Gp-Control -Generator
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***27 | Connector Group | 2 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
230-9604 Valve & Mtg Gp-Control -Parking Brake Manual Release
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***61 | Elbow Group | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
230-9625 Valve & Mtg Gp-Hydraulic Fan
| 11***20 | Elbow | 1 |
| 15***30 | Connector As | 1 |
| 23***25 | Valve & Mtg Group-Hydraulic Fan | 1 |
230-9607 Valve & Mtg Gp-Tow Point
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
| 14***74 | Elbow As | 4 |
232-7423 Valve & Mtg Gp-Truck Hitch
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***74 | Elbow As | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
230-9599 Valve & Mtg Gp-Vibratory -Vibratory Bypass
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 1 |
| 15***59 | Tee Group | 1 |
| 16***74 | Tee Group | 1 |
215-3511 Valve Gp-Accumulator Charging
| 21***11 | Valve Group-Accumulator Charging | 1 |
| 21***56 | Cartridge As-Valve | 1 |
| 21***57 | Kit-Seal | 1 |
208-1632 Valve Gp-Control -Vibratory
| 19***47 | Valve Group-Control; (Vibratory) | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
284-3559 Valve Gp-Control -Auxiliary
| 11***29 | Ring-Backup | 6 |
| 23***82 | Nut-Special | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
190-8803 Valve Gp-Control -Vibratory Bypass
| 19***03 | Valve Group-Control; -Vibratory Bypass | 1 |
| 22***80 | Valve Group-Control; (Vibratory Bypass) | 1 |
| 22***83 | Coil | 1 |
272-1594 Valve Gp-Control -Auxiliary
| 11***29 | Ring-Backup | 6 |
| 23***82 | Nut-Special | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
251-4844 Valve Gp-Control -Generator
| 25***44 | Valve Group-Control; -Generator | 1 |
| 25***77 | Kit-Seal; (Generator Control Valve) | 1 |
| 25***79 | Valve As-Needle | 1 |
230-9160 Valve Gp-Control -Truck Hitch
| 23***82 | Nut-Special | 1 |
| 23***60 | Valve Group-Control; -Truck Hitch | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
230-9628 Valve Gp-Control
| 22***81 | Coil | 1 |
| 22***82 | Seal-O-Ring | 1 |
| 22***83 | Nut-Knurl; (1/2-20-Thd) | 1 |
195-2880 Valve Gp-Counterbalance -Tow Point
| 03***53 | Seal-O-Ring; (08.92mm Id) | 2 |
| 11***16 | Kit-Seal; (Counterbalance Valve) | 1 |
| 19***77 | Valve Group-Counterbalance; (Tow Point) | 2 |
229-8395 Valve Gp-Pump Control -Propel
| 03***39 | Seal-O-Ring (Id=9.25mm) | 4 |
| 12***42 | Gasket | 1 |
| 22***95 | Valve Group-Pump Control; -Propel | 1 |
300-0505 Valve Gp-Solenoid
| 25***57 | Kit-Seal; (Check Valve) | 1 |
| 25***37 | Valve Group-Solenoid; (24-Volt) | 2 |
| 27***10 | Coil-Solenoid | 2 |
332-1453 Valve Gp-Solenoid
| 33***53 | Valve Group-Solenoid | 1 |
103-3602 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 1 |
| 11***21 | Coil | 2 |
300-0504 Valve Gp-Solenoid -Extender, Slope
| 25***57 | Kit-Seal; (Check Valve) | 1 |
| 25***37 | Valve Group-Solenoid; (24-Volt) | 1 |
| 27***10 | Coil-Solenoid | 2 |
197-5294 Vibratory Gp
| 10***90 | Coupling | 4 |
| 10***95 | Bearing | 8 |
| 10***39 | Key-Square | 4 |
8i-0143 Vibratory Gp
| 09***99 | Fitting-Grease; (Hydraulic) | 3 |
| 10***95 | Bearing | 8 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
Implements
242-3914 Extension Ar -20-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 18***19 | Extension Group-Screed; -Diesel Heat, 12-In | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
242-3915 Extension Ar -22-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 18***08 | Extension Group-Screed; -Diesel Heat, 24-In | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
242-3911 Extension Ar -24-Ft, 2-In
| 10***83 | Extension Ar; -Diesel Heat, 28-In | 2 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
242-3916 Extension Ar -24-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 18***08 | Extension Group-Screed; -Diesel Heat, 24-In | 2 |
| 18***19 | Extension Group-Screed; -Diesel Heat, 12-In | 2 |
106-3483 Extension Ar -Diesel Heat, 28-In
| 10***52 | Harness As-Screed; (Extension) | 1 |
| 10***83 | Extension Ar; -Diesel Heat, 28-In | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 8 |
106-3482 Extension Ar -Diesel Heat, 12-In
| 10***51 | Harness As-Screed; (Extension) | 1 |
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 5 |
241-9103 Extension Ar-Auger
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
| 21***53 | Extension Group-Main Frame | 1 |
242-3909 Extension Gp-Screed -21.5-Ft
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
253-4761 Extension Ar-Screed -22-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
253-4760 Extension Ar-Screed -20-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
253-4744 Extension Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
259-2393 Extension Gp-Screed -20-Ft
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
185-5408 Extension Gp-Screed -Diesel Heat, 24-In
| 10***95 | Bearing | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
245-9083 Extension Gp-Screed -Electric Heat, 12-In
| 1A***68 | Nut | 4 |
| 20***59 | Plate | 1 |
| 20***63 | Frame As | 1 |
245-9082 Extension Gp-Screed -Electric Heat With Vibration, 28-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***31 | Bar-Spacer | 1 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
259-2395 Extension Gp-Screed -24-Ft
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
259-2394 Extension Gp-Screed -22-Ft
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
259-2391 Extension Gp-Screed -21-Ft, 6-In
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
245-9081 Extension Gp-Screed -Electric Heat, 12-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
253-4745 Extension Gp-Screed -Electric Heat, 24-In
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
259-2392 Extension Gp-Screed -24-Ft, 2-In
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
8i-0520 Extension Gp-Screed -Diesel Heat, 12-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
245-9084 Extension Gp-Screed -Electric Heat With Vibration, 24-In
| 10***95 | Bearing | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
8i-0521 Extension Gp-Screed -Diesel Heat With Vibration, 28-In
| 10***95 | Bearing | 2 |
| 10***12 | Shaft As-Vibratory | 1 |
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
185-5419 Extension Gp-Screed -Diesel Heat, 12-In
| 18***19 | Extension Group-Screed; -Diesel Heat, 12-In | 1 |
| 1A***68 | Nut | 4 |
| 20***59 | Plate | 1 |
236-2086 Hitch Ar-Truck
| 19***82 | Hitch Group-Truck; -Oscillating | 1 |
| 23***23 | Valve & Mtg Group-Truck Hitch | 1 |
| 23***82 | Lines Group-Truck Hitch | 1 |
276-3178 Hitch Gp-Truck
| 16***76 | Hitch Group-Truck; -Oscillating | 1 |
| 19***08 | Bar | 1 |
| 19***09 | Pin As | 1 |
195-3182 Hitch Gp-Truck -Oscillating
| 16***76 | Hitch Group-Truck; -Oscillating | 1 |
| 19***08 | Bar | 1 |
| 19***09 | Pin As | 1 |
166-7676 Hitch Gp-Truck -Oscillating
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
236-2083 Roller Ar-Push
| 11***58 | Screw; 12-Point Screw, Screw, Roller Group-Push | 1 |
| 14***11 | Plug Group | 1 |
| 19***08 | Bar | 1 |
118-8358 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 10 |
| 11***57 | Roller As | 1 |
| 11***58 | Screw; 12-Point Screw, Screw, Roller Group-Push | 1 |
112-1276 Shaft Gp-Drive -Eccentric Weight
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 11***76 | Shaft Group-Drive; -Eccentric Weight | 1 |
| 24***28 | Seal | 1 |
Lubrication System
191-0523 Adapter Gp-Oil Line -Fuel Injection Pump
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 19***22 | Adapter | 1 |
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
222-5946 Breather Gp
| 14***54 | Bolt; (M8x1.25x105-mm) | 1 |
| 16***10 | Breather As; (Crankcase) | 1 |
| 22***46 | Breather Group; -Crankcase | 1 |
233-9849 Filter Gp-Engine Oil
| 14***29 | Connector As | 1 |
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
220-1194 Fumes Disposal Gp
| 16***48 | Stud; (M8x1.25x40-mm, M8x1.25x17.5-mm) | 1 |
| 22***94 | Fumes Disposal Group | 1 |
| 22***10 | Hose-Disposal; (Fumes Disposal) | 1 |
280-7443 Gauge Gp-Oil Level (Dipstick) -Engine
| 14***50 | Tube As | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 28***70 | Gauge-Oil Level; (Dipstick)(Engine) | 1 |
223-9984 Gauge Gp-Oil Level (Dipstick) -Engine
| 14***50 | Tube As | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 22***84 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
117-5125 Lines Gp-Engine Oil
| 11***25 | Lines Group-Engine Oil | 1 |
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
159-0285 Lines Gp-Turbocharger Oil
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 15***85 | Lines Group-Turbocharger Oil; (Turbocharger Oil) | 1 |
| 15***18 | Tube As-Oil Drain | 1 |
237-8063 Manifold Gp-Engine Oil
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 4 |
| 22***96 | Manifold-Oil; (Engine) | 1 |
| 23***63 | Manifold Group-Engine Oil | 1 |
246-1569 Mounting Gp-Engine Oil Filter
| 17***20 | Strap-Dual Clamp | 3 |
| 24***69 | Mounting Group-Engine Oil Filter | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
247-2022 Mounting Gp-Oil Level Gauge
| 03***80 | Spacer; (9x16x36-mm) | 1 |
| 24***22 | Mounting Group-Oil Level Gauge | 1 |
| 8M***70 | Clip .5 In. (1.27 cm) I.D. Hole | 1 |
200-4497 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
192-2981 Pump Gp-Engine Oil
| 19***81 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
Machine Arrangement
222-2572 Chassis Ar -Ap-1055d
| 19***96 | Guide Group-Steering | 1 |
| 22***72 | Chassis Ar; -Ap-1055d | 1 |
| 22***09 | Frame Group-Main | 1 |
262-0715 Chassis Ar -Bg-2455d
| 19***96 | Guide Group-Steering | 1 |
| 22***09 | Frame Group-Main | 1 |
| 23***42 | Hopper Group | 1 |
262-0714 General Ar -Bg-2455d
| 22***71 | Undercarriage Ar | 1 |
| 22***73 | Electrical Ar | 1 |
| 22***74 | Conveyor Ar-Drag & Auger | 1 |
222-2570 General Ar -Ap-1055d
| 22***70 | General Ar; -Ap-1055d | 1 |
| 22***71 | Undercarriage Ar | 1 |
| 22***72 | Chassis Ar; -Ap-1055d | 1 |
195-9753 Kit-Maintenance
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
| 10***87 | Switch As-Toggle; (Screed Raise/Hld/Float) | 1 |
229-3115 Screed Ar -10-20b
| 11***67 | Lines Group-Vibratory | 1 |
| 11***69 | Lines Group-Extender | 1 |
| 11***39 | Platform Group | 1 |
231-4642 Screed Ar
| 19***85 | Lines Group-Slope | 1 |
| 19***87 | Frame Group-Screed | 1 |
| 19***88 | Crown Group | 1 |
Operator Station
230-3640 Console Gp-Instrument -Center
| 22***67 | Support As | 1 |
| 23***40 | Console Group-Instrument; -Center | 1 |
| 31***13 | Console Group-Instrument | 1 |
318-7413 Console Gp-Instrument
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 46 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
291-2145 Console Gp-Instrument
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 46 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
235-3509 Console Gp-Instrument -Center
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 46 |
| 10***84 | Relay As; (24-Volt) | 1 |
| 11***18 | Clip | 6 |
228-9127 Console Gp-Operator
| 10***05 | Cap-Receptacle | 2 |
| 11***18 | Clip | 14 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 4 |
160-6567 Control Gp-Unprgmed Monitor -Caterpillar Monitoring System
| 16***67 | Control Group-Unprgmed Monitor; -Caterpillar Monitoring System | 1 |
| 25***03 | Control Group-Unprogrammed; (Caterpillar Monitoring System)(Caterpillar Monitoring System) | 1 |
348-3782 Display Gp-Monitor -Accugrade
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 10 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
330-6558 Display Gp-Monitor -Accugrade
| 15***62 | Knob | 2 |
| 2M***19 | Ring-Retaining | 2 |
| 32***46 | Box Group-Control | 1 |
330-6089 Display Gp-Monitor -Unprogrammed
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 14***44 | Plug As-Connector; (70-Pin) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
233-1749 Floor Mat Gp
| 20***00 | Floor Mat; (Operator Station Floor) | 1 |
| 20***02 | Floor Mat; (Operator Station Floor) | 1 |
| 23***49 | Floor Mat Group | 1 |
233-3564 Guard Gp-Vandalism
| 21***13 | Handle | 4 |
| 23***64 | Guard Group-Vandalism | 1 |
| 24***68 | Cover | 1 |
132-3090 Lever Gp-Propel
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
101-9559 Lock Gp-Rotation
| 10***59 | Lock Group-Rotate | 1 |
| 10***60 | Plate | 1 |
| 13***64 | Bushing | 2 |
166-6943 Module Gp-Quad Gauge
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 16***43 | Module Group-Quad Gauge; -Fuel Level-Engine Coolant Temperature-Hydraulic Oil Temp-Engine Oil Pressure | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
222-2578 Operator Ar
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 22***78 | Operator Ar | 1 |
| 23***57 | Platform Group-Operator; -Lh | 1 |
235-3511 Panel Gp-Instrument -Center Console
| 10***66 | Bezel | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***87 | Start Switch Assembly; (Key)(Engine) | 1 |
228-9128 Panel Gp-Instrument -Operator Console
| 08***41 | Switch As-Toggle; (Lh Feeder Auto/Manual Control) | 1 |
| 08***12 | Lens-Clear; (Hazard Warning Lights) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
197-5295 Platform Gp
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 2 |
| 19***01 | Bracket | 2 |
| 19***03 | Platform As; (Extender) | 2 |
118-4339 Platform Gp
| 11***14 | Platform As-Top | 1 |
| 11***39 | Platform Group | 1 |
| 12***51 | Support As-Platform; (Rh Outer) | 1 |
231-7162 Platform Gp-Operator -Rh
| 10***59 | Lock Group-Rotate | 1 |
| 16***22 | Screw-Button Head; (M8x1.25x30-mm) | 2 |
| 19***45 | Cover As-Console; (Operator) | 1 |
247-1873 Platform Gp-Operator
| 24***73 | Platform Group-Operator | 1 |
| 24***03 | Platform As; (Rh) | 1 |
| 24***04 | Platform As; (Lh) | 1 |
231-7157 Platform Gp-Operator -Lh
| 10***59 | Lock Group-Rotate | 1 |
| 16***22 | Screw-Button Head; (M8x1.25x30-mm) | 2 |
| 19***45 | Cover As-Console; (Operator) | 1 |
235-3151 Seat Gp-Suspension -Vinyl
| 19***32 | Kit-Foam Back | 1 |
| 20***36 | Kit-Damper | 1 |
| 20***37 | Kit-Seat; (Indicators) | 1 |
199-4298 Seat Gp-Suspension -Vinyl
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 2 |
198-9009 Steering Column Gp
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 08***11 | Ring | 2 |
| 10***12 | Bracket As-Motor | 1 |
106-8541 Umbrella Gp
| 10***41 | Umbrella Group; -Bg-225c | 1 |
187-6649 Umbrella Gp
| 18***49 | Umbrella Group; -Ap-650b | 1 |
Power Train
228-7072 Drive Gp-Final
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 3 |
| 18***43 | Shield | 2 |
352-2524 Drive Gp-Hydrostatic
| 27***40 | Kit-Seal; (Pump Drive) | 1 |
| 27***41 | Kit-Bearing | 1 |
| 32***90 | Gauge-Sight; (Oil Level) | 1 |
230-9582 Hydraulic Ar-Propel
| 19***66 | Motor & Mtg Group-Propel | 1 |
| 23***82 | Hydraulic Ar-Propel | 1 |
| 23***91 | Pump & Mtg Group-Propel | 1 |
230-9593 Lines Gp-Propel
| 11***00 | Hose As | 1 |
| 12***09 | Valve-Ball; (Hydraulic Tank Drain) | 1 |
| 12***50 | Hose As | 1 |
256-9597 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 13***67 | Piston-Brake | 1 |
| 15***84 | Cone | 2 |
321-9807 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 13***67 | Piston-Brake | 1 |
| 15***84 | Cone | 2 |
272-7288 Planetary Gp-Final Drive -2-Speed
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 13***67 | Piston-Brake | 1 |
| 15***84 | Cone | 2 |
325-4689 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 13***67 | Piston-Brake | 1 |
| 15***84 | Cone | 2 |
Service Equipment And Supplies
269-8337 Film Gp
| 17***92 | Film-Warning; (Mounting) | 2 |
| 17***93 | Film-Warning; (Hopper Support) | 2 |
| 17***62 | Plate-Warning; (High Pressure Oil) | 2 |
241-2645 Film Gp -English
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
| 08***52 | Decal-Caution, Hopper Support | 2 |
| 17***59 | Plate-Warning; (High Pressure Oil) | 2 |
269-8338 Film Gp
| 17***80 | Film-Warning; (Mounting Machine) | 2 |
| 17***81 | Film-Warning; (Hopper Support) | 2 |
| 17***61 | Plate-Warning; (High Pressure Oil) | 2 |
269-8336 Film Gp
| 15***15 | Film-Warning; (Hopper Support) | 2 |
| 15***34 | Film-Warning; (Mounting) | 2 |
| 17***60 | Plate-Warning; (High Pressure Oil) | 2 |
233-1746 Plate & Film Gp -Ap-1055d
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 2 |
| 12***13 | Film; (Tow Point Cylinder) | 2 |
254-0056 Plate & Film Gp
| 08***54 | Film-Notice; (Screed Retract) | 2 |
| 10***08 | Film; (Screed Adjustment)(Extender Screed) | 1 |
| 10***14 | Handle | 1 |
262-0716 Plate & Film Gp -Bg-2455d
| 11***73 | Film-Stripe; (450-cm Each) | 0 |
| 11***75 | Film-Identification; (Barber-Greene)(Barber-Greene) | 3 |
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
254-0054 Plate & Film Gp
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 2 |
| 15***79 | Film-Instruction; (Grease)(Instructions) | 2 |
| 16***89 | Tack-Fastener | 4 |
201-7598 Pump & Motor Gp-Washdown -Fuel Transfer
| 08***68 | Spacer | 1 |
| 17***71 | Motor Group-Electric; -Fuel Transfer Pump | 1 |
| 19***02 | Pump Group-Fuel | 1 |
266-4529 Pump & Motor Gp-Washdown -Water
| 26***29 | Pump & Motor Group-Washdown; -Water-Emulsion-Diesel Fuel | 1 |
| 31***68 | Kit-Diaphragm | 1 |
| 31***69 | Kit-Valve | 1 |
262-3878 Tank Gp-Emulsion
| 26***70 | Tank As | 1 |
| 26***78 | Tank Group-Emulsion | 1 |
| 4B***82 | Ball; (9.52mm) | 1 |
270-2334 Washdown Gp-Ecology
| 00***14 | Coupling-Pipe | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Hose As | 1 |
237-0305 Washdown Gp-Ecology
| 10***87 | Connector | 1 |
| 10***05 | Plate | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
Slope And Grade Control
233-3566 Beam Gp-Transverse
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 19***78 | Pad | 2 |
| 23***66 | Beam Group-Transverse | 1 |
168-6500 Cable Gp-Control -Grade
| 10***63 | Clamp | 1 |
| 11***95 | Plug | 1 |
| 11***63 | Cable; (Coiled) | 1 |
209-3130 Control Gp-Grade & Slope
| 11***10 | Screw-Pan Head | 8 |
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
168-5031 Control Gp-Grade & Slope
| 14***22 | Cover | 1 |
| 14***25 | Seal-Bushing | 1 |
| 14***26 | Gasket | 1 |
239-3467 Control Gp-Grade & Slope
| 12***36 | Bracket-Mounting | 2 |
| 13***85 | Mount As | 2 |
| 13***87 | Plate | 2 |
209-3125 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***97 | Plug | 1 |
336-1300 Control Gp-Grade & Slope -Accugrade
| 09***49 | Bolt; (M8x1.25x40-mm) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
209-3126 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***97 | Plug | 1 |
122-0095 Sensor Gp-Grade -Sonic
| 11***29 | Cap-Dust | 1 |
| 12***95 | Sensor Group-Grade; -Sonic | 1 |
| 14***16 | Faceplate | 1 |
197-7848 Sensor Gp-Grade -Sonic
| 12***91 | Sensor Group-Sonic; -Grade | 1 |
| 19***48 | Sensor Group-Grade; -Sonic | 1 |
| 19***54 | Tube As | 1 |
209-3132 Sensor Gp-Grade -Averaging Ski
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
197-7847 Sensor Gp-Grade -Averaging Ski
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 19***47 | Sensor Group-Grade; -Averaging Ski | 1 |
| 19***54 | Tube As | 1 |
122-0094 Sensor Gp-Grade
| 11***29 | Cap-Dust | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
209-3131 Sensor Gp-Grade -Sonic
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
122-0090 Sensor Gp-Grade -Averaging Ski
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 12***99 | Arm-Follower | 1 |
348-3783 Sensor Gp-Sonic
| 09***49 | Bolt; (M8x1.25x40-mm) | 4 |
| 13***39 | Screw-Flat Head; (M8x1.25x30-mm) | 4 |
| 27***73 | Clip | 2 |
258-6580 Sensor Gp-Sonic -Averaging Ski
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
122-0091 Sensor Gp-Sonic -Grade
| 12***91 | Sensor Group-Sonic; -Grade | 1 |
| 12***95 | Sensor Group-Grade; -Sonic | 1 |
| 13***83 | Cable As | 1 |
257-6255 Ski Gp-Averaging
| 25***29 | Mount As | 2 |
| 25***30 | Mount As | 2 |
| 25***55 | Ski Group-Averaging | 1 |
Undercarriage
206-5963 Bogie Gp
| 13***57 | Midroller Group | 4 |
| 14***93 | Bogie Group | 1 |
| 17***26 | Shaft | 2 |
206-5959 Frame Gp-Track Roller
| 13***57 | Midroller Group | 2 |
| 14***76 | Bearing | 2 |
| 17***26 | Shaft | 1 |
228-6554 Frame Gp-Track Roller -Front, Lh
| 10***59 | Bearing-Sleeve | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 1 |
| 17***81 | Cover | 1 |
206-5958 Frame Gp-Track Roller -Rear, Rh
| 13***57 | Midroller Group | 2 |
| 14***76 | Bearing | 2 |
| 17***26 | Shaft | 1 |
228-6552 Frame Gp-Track Roller -Lh
| 16***13 | Bolt-Hex; (M36 X 4 X 80) | 1 |
| 18***27 | Plate | 1 |
| 19***74 | Shim; (6.35-mm Thk) | 2 |
228-6551 Frame Gp-Track Roller -Rh
| 16***13 | Bolt-Hex; (M36 X 4 X 80) | 1 |
| 18***27 | Plate | 1 |
| 19***74 | Shim; (6.35-mm Thk) | 2 |
228-6553 Frame Gp-Track Roller -Front, Rh
| 10***59 | Bearing-Sleeve | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 1 |
| 17***81 | Cover | 1 |
136-5157 Midroller Gp
| 05***03 | Washer; (40.46x69.85x7.37-mm Thk) | 1 |
| 10***79 | Cover As | 1 |
| 13***57 | Midroller Group | 1 |
206-5965 Tensioner Gp-Track
| 03***53 | Ring-Retaining | 2 |
| 10***59 | Bearing-Sleeve | 2 |
| 10***18 | Plate | 2 |
267-5625 Track Gp-Rubber
| 26***25 | Track Group-Rubber | 1 |
| 29***41 | Track-Rubber; (Belt) | 2 |
289-8492 Track Gp-Rubber -Smooth
| 28***90 | Track-Rubber; (Belt)(Smooth) | 2 |
| 28***92 | Track Group-Rubber; -Smooth | 1 |
222-2571 Undercarriage Ar
| 22***71 | Undercarriage Ar | 1 |
| 22***51 | Frame Group-Track Roller; -Rh | 1 |
| 22***52 | Frame Group-Track Roller; -Lh | 1 |
AP-1055D serial number reference
The PIN plate on the AP-1055D is a riveted metal tag mounted on the main frame of the tractor unit, usually near the operator's platform or on the frame rail below it. The full PIN reads as CAT plus a model code plus a check character plus the 3-character serial prefix plus a sequence number (for example CATAP105CFAC00743, or shorthand FAC00743) - the 3-letter block just before the trailing digits is the serial prefix that ties the machine to a specific production series.
| Prefix | Identifies | Notes |
|---|---|---|
| BXW | AP-1055D mobile track asphalt paver, C7 ACERT engine | Earliest catalogued prefix for this model (BXW00001-UP), from a parts book manual covering the AP-1055D and its BG-2455D screed together. Thin sourcing beyond that one catalog listing. Confirm exact production years with your dealer. |
| A6P | AP-1055D mobile track asphalt paver, C7 ACERT engine | Appears on operation and maintenance manual coverage and on individual component listings tied specifically to the AP-1055D. Sequence range and build years not documented in available sources, confirm with your dealer. |
| FAC | AP-1055D mobile track asphalt paver, C7 ACERT engine | Most widely attested prefix for this model, seen on multiple used-equipment listings with full PINs such as CATAP105AFAC00437, CATAP105CFAC00743, and FAC00691. Units carrying this prefix show model years roughly 2006 through 2010. |
Frequently asked questions
What engine does the Caterpillar AP-1055D use?
The AP-1055D runs a Cat C7 engine with ACERT Technology -- a turbocharged, 6-cylinder diesel rated 167 kW (224 hp) gross power (SAE J1995) at 2200 rpm with 872 N·m (643 ft/lb) of torque, meeting U.S. EPA Tier 3 and E.U. Stage IIIA emissions standards.
What is the AP-1055D's operating weight?
Tractor weight alone runs roughly 16,600-17,100 kg (36,600-37,580 lb) depending on whether it has Mobil-trac or steel track. Fully configured with a screed and heat package, weight lands between about 19,900 kg and 20,600 kg (43,800-45,420 lb) depending on screed choice and heat type.
What replaced the Caterpillar AP-1055D?
Cat replaced the AP-1055D with the dash-less AP1055, which moved to the Cat C7.1 engine and added features like standard electric screed heat and Pave Start Assistant. The AP-1055D itself had succeeded the earlier AP-1055B, which used a mechanical 3116TA engine.
What AP-1055D owners discuss
Why does one track run slower than the other on an AP-1055D, even with the propel override engaged?
Operators report this exact symptom on both the Mobil-trac and steel-track versions of the D-series paver: one side crawls while the other runs at normal speed with the override switch on. Track speed is set by a PWM-controlled solenoid on each propel valve section, so an uneven left/right speed with otherwise-healthy hydraulics points to that solenoid or its calibration rather than the pump or motor. Field checks used to isolate it: pull the case drain line off the slow-side motor while a helper runs propel (more than a light steady stream signals internal motor leakage); compare pressure across the servo piston on each side for residual differential; or raise the machine, run each track a fixed number of revolutions, and time them side by side. If both sides come out equal on that bench-style test but still differ under load, the fault sits in the valve/solenoid calibration, not the motor. Have your dealer verify propel calibration and pressure readings before swapping a motor.
What quirks come with the C7 engine with ACERT Technology in the AP-1055D?
The AP-1055D's C7 ACERT uses a HEUI (hydraulically actuated electronic unit injector) fuel system, and owners of C7 ACERT-powered equipment across platforms report the same recurring themes: injector seal leaks that let fuel bleed into the crankcase oil (watch for a fuel smell or a rising level on the dipstick), and soot loading in the diesel particulate filter or turbo inlet on units run at light load for long stretches, which is common on a paver idling between mats. The regen system's igniter can also give trouble: a fouled inline fuel filter fitting or a worn igniter will stop a parked regen from lighting off. None of this is unique to the paver application, it tracks with the general C7 ACERT HEUI platform. Have your dealer verify injector and HEUI pump condition before condemning the fuel system on a no-start or fuel-in-oil complaint.
How does the Mobil-trac undercarriage hold up, and what wears first?
The rubber belt track offered alongside the steel-track option on this model is built to be low-maintenance: a hydraulic tensioning cylinder with an accumulator keeps belt-to-drive-wheel friction correct automatically, so there is no manual tension adjustment like a dozer or excavator undercarriage. The wear points operators actually watch are the bogie wheels and bearings under the belt; the quad bogie near the rear carries extra load and is usually the first thing to show play, along with the belt's internal steel-cable carcass at the edges if the machine tracks off-camber for long periods. Inspect the belt cover for cuts and the bogies for looseness rather than chasing pin-and-bushing wear the way you would on a crawler dozer undercarriage.
Why does the mat come out wavy or unevenly textured behind the screed?
This is a setup issue more often than a mechanical failure. Common causes cited by paving crews: screed plates worn thin or worn unevenly side to side (measure all four corners; a large left/right difference means the screed is out of alignment, not just worn); angle of attack set wrong, which should sit around 3-6 mm (1/8-1/4 in) nose-up; too flat and the nose digs in, starving the back of the plate of pressure. Worn seals in the screed lift cylinders let the screed drift or lift unevenly, and worn screed arm tow points show up the same way. Cold screed plates tear the mat when heat-up time gets cut short or a heating element has failed. Keeping a steady head of material in front of the screed matters as much as any mechanical adjustment; surging material flow shows up as texture variation even on a mechanically sound screed.
Are there known electrical or sensor issues on the AP-1055D?
There is no widely reported model-specific electrical failure pattern for the AP-1055D in owner and operator discussion; most complaints trace back to the propel and hydraulic side rather than the wiring. General practice that applies here as on any C7 ACERT electronically controlled machine: read the fault code's FMI first, since it tells you whether the code points to an open or shorted circuit, an out-of-range signal, or a genuine component failure, and inspect harness connectors for corrosion or chafing before replacing a sensor outright. Given the age of most AP-1055D units still in service, connector corrosion at the engine harness and screed heat harness is the most likely source of an intermittent fault. Have your dealer verify any fault code with a full diagnostic scan before replacing an ECM or control module.
What should I check before buying a used AP-1055D?
Measure screed plates at all four corners; new plates run about 12 mm (1/2 in) thick, and anything down near 6 mm (1/4 in) is nearing replacement, and a big difference side to side signals the screed has been running out of alignment. Grab the auger and check for play at the bearings and flights, and look for chain or flight stretch. Pull the engine oil dipstick and check for a coolant sheen or milky look, which points to a head gasket problem. Run the engine and listen for knock, check for smoke and blow-by, and cycle every hydraulic function (propel, screed lift and extend, conveyors, augers) to confirm smooth response with no lag or drift to one side. On Mobil-trac machines check belt cover condition and bogie wheel play; on steel-track machines check pad and bushing wear. Ask for maintenance records and hour history, and ask specifically about forced regens or igniter replacements on the DPF/regen system. Have your dealer verify hydraulic pressures and run a full diagnostic scan before final purchase.
Why does the paver feel sluggish on hydraulic functions like the screed, conveyors, or augers?
Low or contaminated hydraulic fluid is the most frequently cited cause of sluggish or unresponsive screed, conveyor, and auger functions; leaks or skipped fluid changes drop system pressure before anything else fails. Check fluid level and condition first, then hoses and fittings for external leaks, before chasing pumps or valves. On the propel side specifically, the machine controller manages steering and propulsion together for straight-line tracking, so a hydraulic fault in that circuit tends to show up as drift or pull to one side in addition to general sluggishness elsewhere.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific AP-1055D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.