Caterpillarasphalt paver
Caterpillar AP-1050B
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar AP-1050B is a mid-size tracked asphalt paver from Cat's B-series paving line, built through the mid-to-late 1990s and into the early 2000s based on surviving used-equipment records (exact factory start and end dates are not publicly documented, so treat production years as approximate). It runs a Cat 3116TA turbocharged diesel, a 6.6-liter inline six rated at roughly 158 net hp (117 kW) per SAE J1349/ISO 9249, driving the machine through a hydrostatic propel system. Operating weight ranges from about 17.7 to 19.6 tonnes (39,100 to 43,140 lb) depending on the screed fitted, since the AP-1050B was offered with a choice of AS2301, Extend-A-Mat 10-20B, or Pavemaster 10B screeds, each changing paving width (roughly 2.4 m/8 ft base out to 6 m/20 ft or more with extensions) and hopper-fed mat width capability. The undercarriage is steel crawler track riding on Cat D3 dozer track rails, not a rubber belt system. In the lineup, the AP-1050B updated the earlier AP-1050 and sat alongside the smaller AP-1000B, with the B-series line continuing afterward through the AP-1055B and later the ACERT-powered AP-1055D.
The main change across this generation was under the hood and in the screed lineup rather than the chassis: the AP-1050B kept a mechanically governed 3116TA with no electronic engine controls, while the follow-on AP-1055D moved to a C7 ACERT engine with full electronic management, and still-later AP1055 E/F-series machines eventually offered a Mobil-Trac rubber-belt undercarriage option that the AP-1050B never had. Screed choice (AS2301 vs. Extend-A-Mat vs. Pavemaster) was a configuration decision at time of sale, so two AP-1050B units can differ meaningfully in operating weight and working width. In today's used and parts market, the AP-1050B holds value as a straightforward, mechanically simple entry point into Cat paving equipment: no ECM diagnostics to troubleshoot, a well-proven 3116 engine family with wide parts support, and a track and hydrostatic-drive design shared closely enough with sibling AP-1000B and AP-1055B machines that undercarriage and screed wear parts remain readily sourced well after the model's original production run ended.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar AP-1050B specifications
Engine
| Engine model | Cat 3116 TA (turbocharged, aftercooled), inline-6 diesel |
| Gross power | 130 kW (174 hp) |
| Net power (ISO 9249 / SAE J1349) | 118 kW (158 hp) |
| Displacement | 6.6 L (403 cu in) |
| Bore x stroke | 106.7 mm x 127 mm (4.2 in x 5.0 in) |
| Emissions tier | Not published on available spec sheets for this model year range - verify against the engine data plate |
Weights
| Tractor weight (base unit, no screed) | 16 011 kg (35,300 lb) |
| Operating weight - with AS2301 screed | 19 568 kg (43,140 lb) |
| Operating weight - with Extend-A-Mat 10-20B screed | 19 436 kg (42,850 lb) |
| Operating weight - with Pavemaster 10B screed | 17 736 kg (39,100 lb) |
| Ground pressure | Not published in available spec sheets |
Dimensions
| Overall length - with push roller and AS2301 screed | 6.55 m (21 ft 6 in); field-listed range up to 21 ft 7 in depending on source |
| Overall length - with truck hitch and AS2301 screed | Approx. 7.03 m (23 ft 1 in) |
| Overall height | 3.38 m (11 ft 1 in) |
| Transport height, muffler removed | 2.77 m (9 ft 1 in) |
| Operating width - with AS2301 screed | 3.3-3.4 m (10 ft 11 in - 11 ft 1 in), varies by source and screed setting |
| Track contact length | 3.05 m (10 ft) |
| Inside turn radius | 0.91 m (3 ft) |
| Truck (hopper) entry width | 3.2 m (10 ft 6 in) |
Performance
| Maximum travel speed | 8 km/h (5 mph) |
| Maximum paving speed | Approx. 61 m/min (200 ft/min) |
| Paving width range - standard screed | 2.4 m (8 ft) minimum up to 6.1 m (20 ft) |
| Paving width range - maximum with full AS2301 screed extensions | Up to 9.1 m (30 ft) |
| Hopper capacity | 6.1 m3 (215 cu ft, listed by some dealers as an 8 cubic-yard hopper) |
| Gradeability | Not published in available spec sheets |
Service capacities (summary)
| Fuel tank | 284 L (75 US gal) |
| Hydraulic system | 151 L (40 US gal) |
| Cooling system | 31.4 L (8.3 US gal) |
| Engine oil | Not published in available spec sheets - service to Cat DEO per the 3116 engine service manual |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
AP-1050B fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat 3116TA turbocharged diesel | approx. 19-26 L (5.0-6.9 US gal), varies by oil pan configuration - exact figure not published in available spec sheets, confirm on dipstick or OMM lube chart | Cat DEO (Diesel Engine Oil), SAE 15W-40 for temperate ambient; SAE 10W-30 down to about -20C; full-synthetic multigrade DEO for colder climates. Oil must meet Cat ECF-1 diesel engine oil spec. |
| Cooling system | 31.4 L (8.3 US gal) | Cat ELC (Extended Life Coolant) or Cat DEAC (Diesel Engine Antifreeze/Coolant), premixed 50/50 with water, rated to roughly -37C low-temp protection. Use full-strength coolant/antifreeze, not straight water. |
| Fuel tank | 283.9 L (75 US gal) | Clean, low-sulfur diesel fuel meeting Cat's diesel fuel specification (No. 1-D/No. 2-D or equivalent ULSD). Winter-blend fuel recommended in cold ambient to prevent gelling. |
| Hydraulic system / hydraulic tank | 151.4 L (40 US gal) tank; total system volume including lines and cylinders runs higher and is not separately published | Cat HYDO Advanced 10 (SAE 10W multigrade hydraulic oil) for wide ambient temperature range; Cat TDTO can substitute where HYDO is unavailable. Match viscosity grade to ambient per the Cat fluids guide for cold-weather starts. |
| Propel / track final drive compartments | not documented separately in available spec sheets for this model - verify component-by-component in the OMM lube chart | Where a planetary final drive gearbox is present, Cat TDTO (Transmission/Drive Train Oil): SAE 30 for warm ambient, SAE 10W for cold ambient, or multi-season TDTO-TMS across a wider range. |
| Grease points (screed, tamper bar, conveyor/auger bearings, pivots) | spec only - no fill volume, lubricate per OMM grease interval chart | Cat Advanced 3Moly grease or Cat Extreme Application (XA) grease, NLGI 2, for high-load pins and bushings; general-purpose multipurpose grease acceptable for low-load fittings. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar AP-1050B maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
Servicing the AP-1050B beyond the schedule
Predictive Maintenance & Fluid Analysis
The AP-1050B's 3116TA has no ECM fault-code system, so scheduled oil analysis carries the diagnostic load. Sample engine oil, hydrostatic drive oil, and auger/conveyor gearbox oil at every 250-hour service to catch turbo wear, fuel dilution, and track-drive contamination before they become failures. Log track tension and bogie wear over time, since D3-rail steel undercarriages wear on a predictable curve. Check screed heater element resistance each spring before the first paving job of the season.
Corrective & Common Repairs
Common failure points on the AP-1050B are the steel D3 track chain and bogey rollers, which wear from abrasive mix spillage, and the hydrostatic propel pumps and motors, which lose charge pressure with age and hours. Auger and conveyor drive chains stretch and need re-tensioning or replacement. Screed vibrator bearings and moldboard wear plates wear steadily on high-hour machines. Fuel filter plugging from stale fuel is common on units that sat idle between paving seasons — change both filters before restart.
Overhaul & Rebuild Points
Major rebuild points on a high-hour AP-1050B center on the undercarriage and hydrostatic drive: track chains, rollers, idlers, and bogies typically need a full rebuild once wear limits are reached, and the propel pumps and motors warrant teardown inspection once charge pressure or response drifts. The 3116TA benefits from a mid-life look at the turbocharger, injectors, and cylinder liners once oil analysis shows rising wear metals. Screed assemblies — moldboards, extension slides, vibrator shafts — are usually reconditioned or replaced as a set.
Seasonal & Environment Servicing
Before seasonal lay-up, clear mix residue from the hopper, augers, and conveyor, and coat exposed screed plates to prevent surface rust over the off-season. Ahead of the first cold start, check coolant protection level and confirm block heater operation for the 3116TA. Grease the steel D3 tracks and bogies before storage and inspect for corrosion afterward. Before the paving season restarts, verify screed heater elements, hydrostatic charge pressure, and track tension after months of inactivity.
AP-1050B common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 112-6523 | Insert-Fuel Filter | Fuel system service | Check fitment → |
| 1R-0751 | Filter-Fuel | Fuel system service | Check fitment → |
| 119-0073 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 8N-9803 | Filter-Fuel | Fuel system service | Check fitment → |
| 6I-2499 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
AP-1050B fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 0100 FMI 01 | Engine oil pressure below normal operating range | Low oil level, worn oil pump, plugged oil filter, or oil pressure sensor failure | Shut engine down immediately, check oil level and filter condition, verify sensor wiring before restart |
| CID 0100 FMI 03 | Engine oil pressure sensor circuit voltage above normal | Open circuit or short to a higher voltage source on the oil pressure sensor wiring | Inspect sensor connector and harness for damage or corrosion, test sensor supply voltage, replace sensor if faulty |
| CID 0110 FMI 00 | Engine coolant temperature above normal operating range | Low coolant level, plugged radiator core, fan drive or fan clutch failure, water pump failure | Shut down and let engine cool, check coolant level and radiator for restriction, inspect fan drive and water pump |
| CID 0111 FMI 01 | Engine coolant level below normal | Coolant leak in hoses, radiator, or water pump seal; low coolant top-off | Inspect cooling system for external leaks, pressure test system, top off with correct coolant mix |
| CID 0190 FMI 00 | Engine speed above normal (overspeed condition) | Aggressive downshift or load change, throttle linkage binding, governor or speed sensor fault | Reduce load and throttle input, inspect throttle linkage and governor, pull logged event data with the engine service tool |
| CID 0097 FMI 00 | Water-in-fuel indicator triggered | Water or contamination accumulated in the primary fuel filter/water separator bowl | Drain the water separator, inspect fuel for contamination, check fuel tank and cap for water intrusion |
| CID 0168 FMI 04 | Electrical system (battery) voltage below normal | Weak or discharged battery, alternator/charging system fault, corroded or loose battery connections | Check battery state of charge and alternator output, clean and tighten battery and ground connections |
| CID 0001 to 0006 FMI 05 | Cylinder injector solenoid circuit current below normal (open circuit) on the indicated cylinder | Broken or disconnected injector wiring harness, failed injector solenoid, corroded connector pin | Inspect injector wiring harness and connectors for the affected cylinder, measure solenoid resistance, replace injector if open |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
AP-1050B attachments & work tools
Screed options
Factory screed choices for this tractor are the AS2301 fixed-frame extendible screed, the Extend-A-Mat 1020B hydraulic extending screed, and the Pavemaster B screed. Base paving width runs about 2.5 m (8 ft 2 in); each screed changes the tractor's overall length and operating width.
Screed width extension
AS2301 uses bolt-on extension inserts, taking width up to roughly 7.4 m (24 ft 5 in) for wide-lane work. The Extend-A-Mat 1020B instead hydraulically telescopes in the field, covering about 2.4-6.1 m (8-20 ft) without stopping to bolt on sections; wide-format figures beyond that vary by configuration.
Screed heating
Screed plates are heated to bring the mat surface up to temperature before paving starts; this paver generation used burner-fed plate heat typical of the era, with later-generation Cat screeds in this size class moving to electrically heated plates. Confirm plate heat type against the data plate/screed model, since it varies by screed and vintage.
Hopper and material feed
Insert-style front hopper holds roughly 6-8 cubic meters (215 cu ft / 8 yd) of mix, with gateless (open-throat) feeders and adjustable-height dual augers feeding material to the screed. A hopper level sensor with temperature readout is available as an option, reporting mix height and delivery temperature to the operator station.
Auger and conveyor control
Dual slat conveyors and dual augers move mix from hopper to screed, each with manual override and pause capability so flow can be matched to changing head-of-material conditions. Screed-mounted consoles allow ratio adjustment of auger and conveyor speed independent of paving speed.
Truck hitch
A swivel-mounted, hydraulically actuated tow-type truck hitch is a common factory option on pavers this size, letting the paver push haul trucks without full metal-to-metal contact. Height and reach are adjustable to suit different truck bumper heights.
Push rollers
Large-diameter push rollers mount at the front of the tractor and can typically be set to multiple positions for shock-free docking of delivery trucks; oscillating/self-adjusting versions are offered in this paver class to absorb truck contact.
Grade and slope control
Sonic or mechanical grade-reference sensors (ski beams, averaging beams, or slope sensors) mount to the tractor to hold mat elevation and cross-slope automatically; on machines this age the control box may be a factory Cat unit or a third-party automation retrofit, so exact hardware varies by machine history.
Operator protection and guarding
Factory options typical for this paver class include an operator canopy or full hardtop with windshield, fold-down umbrella, side shields over augers/conveyors, rear warning beacon, and jobsite working lights. Fitment varies by individual machine build.
Undercarriage
This tractor rides on a steel crawler track undercarriage on Cat D3 dozer track rails, not a rubber belt system. Later same-class Cat pavers in this power/size range offered a rubber-belted Mobil-Trac undercarriage as an alternative, but that option is tied to the newer AP1055-family tractors, not this model.
All AP-1050B assemblies by section
Every catalogued assembly group for the Caterpillar AP-1050B. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
9y-6984 Aftercooler Gp-Water
| 03***83 | Nipple-Front Axle Suction Port | 2 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
136-0596 Aftercooler Gp-Water
| 03***83 | Nipple-Front Axle Suction Port | 1 |
| 10***46 | Hose | 1 |
| 13***96 | Aftercooler Group-Water | 1 |
143-0458 Air Cleaner Gp
| 14***58 | Air Cleaner Group | 1 |
| 17***87 | Bracket As | 1 |
| 17***93 | Tube As | 1 |
104-7483 Air Cleaner Gp
| 10***83 | Air Cleaner Group | 1 |
| 10***01 | Adapter As | 1 |
| 11***33 | Bracket | 2 |
172-0993 Air Cleaner Gp
| 06***70 | Cap | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
6i-2551 Air Cleaner Gp
| 6I***99 | Filter Element As-Air; (Primary) | 1 |
| 6I***00 | Filter Element As-Air; (Secondary) | 1 |
| 6I***51 | Air Cleaner Group | 1 |
100-5992 Cartridge Gp-Turbocharger
| 10***92 | Cartridge Group-Turbocharger | 1 |
104-7484 Exhaust Gp
| 10***84 | Exhaust Group | 1 |
| 10***74 | Extension As | 1 |
| 11***89 | Muffler | 1 |
143-0459 Exhaust Gp
| 10***70 | Elbow-Exhaust | 1 |
| 10***25 | Coupling-Exhaust | 1 |
| 11***89 | Muffler | 1 |
9y-4968 Lines Gp-Air
| 7C***55 | Hose | 1 |
| 8T***03 | Clamp; (Hose) | 2 |
| 9Y***68 | Lines Group-Air | 1 |
7w-9248 Manifold Gp-Exhaust
| 10***38 | Manifold-Exhaust | 1 |
| 11***00 | Gasket-Manifold | 3 |
| 14***48 | Bolt; (M10x1.5x65-mm)(M10x1.50x65mm) | 12 |
4w-3480 Manifold Gp-Inlet
| 11***50 | Gasket | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 3 |
| 4W***80 | Manifold Group-Inlet; Inlet Manifold Group | 1 |
4m-0310 Precleaner Gp
| 1M***50 | Bowl | 1 |
| 1S***63 | Bolt (5/16) | 1 |
| 4M***10 | Precleaner As | 1 |
121-7746 Precleaner Gp
| 12***46 | Precleaner Group | 1 |
| 13***43 | Clamp-Hose | 1 |
| 1M***50 | Bowl | 1 |
124-9340 Turbocharger Gp
| 10***77 | Housing | 1 |
| 11***58 | Cartridge Group-Turbocharger | 1 |
| 12***54 | Seal-O-Ring | 1 |
119-3084 Turbocharger Gp
| 11***84 | Turbocharger Group | 1 |
| 12***40 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
115-4247 Turbocharger Gp
| 11***47 | Turbocharger Group | 1 |
| 11***56 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
115-5856 Turbocharger Gp
| 10***92 | Cartridge Group-Turbocharger | 1 |
| 10***69 | Housing; (Compressor) | 1 |
| 11***56 | Turbocharger Group | 1 |
Basic Engine
108-5759 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 10***59 | Camshaft Group; (Single) | 1 |
| 13***76 | Camshaft Assem. | 1 |
2w-9608 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 2W***08 | Camshaft Group-Single | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
103-0863 Cover Gp-Cylinder Block
| 10***63 | Cover Group-Cylinder Block | 1 |
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 13***40 | Spacer; (9x15x15-mm Thk) | 1 |
7l-0004 Cover Gp-Front Housing
| 10***20 | Cover As-Front | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
4w-2172 Cover Gp-Valve Mechanism
| 11***40 | Gasket; (Valve Cover) | 1 |
| 11***60 | Cover | 1 |
| 4W***72 | Cover Group-Valve Mechanism; Valve Mechanism Cover Group | 1 |
4w-2197 Crankshaft Gp
| 10***30 | Bearing-Main; (Standard) | 3 |
| 10***25 | Crankshaft Assem. | 1 |
| 10***02 | Bearing-Thrust; (Standard) | 1 |
7e-2482 Cylinder Block Gp
| 10***48 | Cylinder Block Group | 1 |
| 1W***07 | Sleeve | 2 |
| 4P***51 | Tube As-Piston Cooling | 6 |
100-4948 Cylinder Block Gp
| 10***48 | Cylinder Block Group | 1 |
| 10***89 | Cylinder Block As | 1 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
149-5403 Cylinder Block Gp
| 14***02 | Pin, Cylinder Block As | 1 |
| 14***03 | Cylinder Block Group | 1 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
129-1095 Cylinder Block Gp
| 12***95 | Cylinder Block Group | 1 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
115-4108 Cylinder Head As
| 11***07 | Cylinder Head As | 1 |
| 11***08 | Cylinder Head As | 1 |
| 11***36 | Seal-Valve Stem | 12 |
190-9066 Cylinder Head As
| 11***61 | Sleeve | 6 |
| 16***63 | Insert-Valve Seat; (Inlet) | 6 |
| 19***66 | Cylinder Head As | 1 |
115-4107 Cylinder Head As
| 10***10 | Cylinder Head | 1 |
| 11***07 | Cylinder Head As | 1 |
| 11***61 | Sleeve | 6 |
140-7371 Cylinder Head Gp
| 11***36 | Seal-Valve Stem | 12 |
| 13***19 | Valve-Exhaust | 6 |
| 14***71 | Cylinder Head Group | 1 |
115-4165 Cylinder Head Gp
| 11***07 | Cylinder Head As | 1 |
| 11***65 | Cylinder Head Group | 1 |
| 11***36 | Seal-Valve Stem | 12 |
9y-8871 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 11***65 | Cylinder Head Group | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
159-0305 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
| 14***71 | Cylinder Head Group | 1 |
7c-2428 Damper & Pulley Gp
| 10***50 | Pulley; (3 Groove) | 1 |
| 20***88 | Damper Assem. | 1 |
| 6V***30 | Bolt; (M10x1.5x60-mm) | 8 |
9y-9177 Damper & Pulley Gp
| 20***88 | Damper Assem. | 1 |
| 6V***30 | Bolt; (M10x1.5x60-mm) | 8 |
| 9Y***76 | Pulley-Crankshaft | 1 |
4p-2844 Damper & Pulley Gp
| 20***88 | Damper Assem. | 1 |
| 4P***43 | Pulley | 1 |
| 4P***44 | Damper & Pulley Group | 1 |
136-8877 Drain Gp-Engine Oil
| 13***77 | Drain Group-Engine Oil | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
7c-4566 Drain Gp-Engine Oil
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 7C***66 | Drain Group-Oil Pan; -Magnetic Plug | 1 |
108-5434 Drive Gp-Accessory
| 10***60 | Adapter-Pump | 1 |
| 10***34 | Drive Group-Accessory | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
7c-0044 Drive Gp-Fan
| 4W***03 | Cup-Roller Bearing | 2 |
| 4W***04 | Cone-Roller Bearing | 2 |
| 4W***42 | Spacer; (35.3x45.5x38.331-mm Thk) | 1 |
104-8678 Drive Gp-Pump
| 00***44 | Elbow; (45-Deg) | 1 |
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 10***78 | Drive Group-Pump | 1 |
114-9966 Drive Gp-Pump
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 07***82 | Seal | 1 |
| 07***06 | Coupling | 2 |
187-8713 Drive Gp-Pump
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 07***06 | Coupling | 2 |
| 07***13 | Sleeve | 1 |
7c-6998 Drive Gp-Water Pump
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
| 11***38 | Pulley As-Idler | 1 |
4w-5428 Drive Gp-Water Pump
| 03***75 | V-Belt; (Pump Drive)(Water) | 1 |
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
9y-2755 Flywheel Gp
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
101-4540 Gear Gp-Front
| 10***07 | Shaft-Cam Idler | 1 |
| 10***08 | Plate-Retaining | 1 |
| 10***40 | Gear Group-Front | 1 |
2w-8475 Gear Gp-Front
| 2W***65 | Shaft-Idler | 1 |
| 2W***66 | Bearing-Sleeve | 1 |
| 2W***75 | Gear Group-Front; Front Gear Group | 1 |
9y-4856 Housing Gp-Flywheel
| 1B***70 | Plug-Pipe; (Drain) | 1 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 1 |
| 2P***94 | Plug-Sealing | 1 |
101-4539 Housing Gp-Front
| 10***39 | Housing Group-Front | 1 |
| 10***11 | Plug | 2 |
| 13***42 | Housing-Front | 1 |
7l-0002 Housing Gp-Front
| 1U***46 | Sealant (For Locations A) | 0 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 4 |
4w-2515 Lifting Gp-Engine
| 4W***82 | Plate-Lifting; (Rear)(Rear) | 1 |
| 4W***83 | Plate-Lifting; (Front) | 1 |
| 4W***15 | Lifting Group | 1 |
178-9389 Mounting Gp-Engine Flexible
| 10***66 | Support As-Engine; (Lh) | 1 |
| 10***67 | Support As-Engine; (Rh) | 1 |
| 11***62 | Mount As | 2 |
104-7486 Mounting Gp-Engine Flexible
| 10***86 | Mounting Group-Engine Flexible | 1 |
| 10***20 | Mount As | 1 |
| 10***66 | Support As-Engine; (Lh) | 1 |
4w-0269 Pan Gp-Oil -Engine
| 11***77 | Pan-Oil | 1 |
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 26***16 | Gasket-Oil Pan; (Engine) | 1 |
107-7639 Piston & Rod Gp
| 10***45 | Crown As-Piston | 1 |
| 10***39 | Piston & Rod Group; Connecting Rod And Piston Group | 1 |
| 10***87 | Ring-Piston (Top-Chrome) | 1 |
4w-5429 Pulley Gp-Crankshaft
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
| 4W***29 | Pulley Group-Crankshaft; Crankshaft Pulley Group | 1 |
| 7W***73 | Pulley-Crankshaft; (1-Groove) | 1 |
9y-0757 Pulley Gp-Fan Drive
| 7C***90 | Pulley-Fan Drive | 1 |
| 8T***08 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 6 |
| 9Y***57 | Pulley Group-Fan Drive | 1 |
107-7722 Rocker Arm Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 10***91 | Seat-Wear | 1 |
| 10***76 | Rocker Arm As; (Unit Injector) | 1 |
4w-1016 Seal Gp-Crankshaft
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
| 4W***16 | Seal Group-Crankshaft | 1 |
| 7C***71 | Seal Group-Crankshaft; (Rear)(Rear) | 1 |
115-4203 Seal Gp-Crankshaft
| 11***03 | Seal Group-Crankshaft | 1 |
| 22***09 | Seal Group-Crankshaft; (Rear) | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
4p-4372 Mechanism Gp-Fuel Pump & Valve
| 10***22 | Rocker Arm Group-Valve | 6 |
| 14***47 | Arm As-Lifter | 4 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 2 |
Braking System
192-7472 Brake Gp-Parking
| 11***28 | Kit-Seal; (Final Drive Planetary) | 1 |
| 11***29 | Kit-Brake Lining; (Final Drive Planetary) | 1 |
| 12***65 | Kit-Brake Spring; (Final Drive Planetary) | 1 |
Controls
8i-0732 Adjuster Gp-Height -Manual
| 10***01 | .. Roller, Bearing | 2 |
| 10***14 | Handle | 2 |
| 10***39 | Key-Square | 4 |
111-9148 Adjuster Gp-Strike-Off
| 10***01 | .. Roller, Bearing | 2 |
| 10***39 | Key-Square | 2 |
| 11***48 | Adjuster Group-Strike-Off | 1 |
122-0160 Adjuster Gp-Strike-Off
| 10***36 | Motor Group-Power Adjuster | 2 |
| 12***54 | Support As; (Rh)(Rh Motor) | 1 |
| 12***55 | Support As; (Lh)(Lh Motor) | 1 |
8i-0338 Control Gp-Thickness -Counterclockwise
| 13***77 | Lockout | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
| 1D***20 | Nut,Plain,Hexagon Gear Mtg | 2 |
222-7160 Control Gp-Thickness -Counterclockwise Acme
| 13***77 | Lockout | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
| 1D***20 | Nut,Plain,Hexagon Gear Mtg | 2 |
8i-0339 Control Gp-Thickness -Clockwise Acme
| 13***77 | Lockout | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
| 1D***20 | Nut,Plain,Hexagon Gear Mtg | 2 |
119-1408 Control Gp-Thickness
| 11***08 | Control Group-Thickness | 1 |
| 11***09 | Shaft As | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
8i-0337 Control Gp-Thickness -Clockwise
| 13***77 | Lockout | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
| 1D***20 | Nut,Plain,Hexagon Gear Mtg | 2 |
8i-0340 Control Gp-Thickness -Counterclockwise Acme
| 13***77 | Lockout | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
| 1D***20 | Nut,Plain,Hexagon Gear Mtg | 2 |
222-7158 Control Gp-Thickness -Clockwise
| 13***77 | Lockout | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
| 1D***20 | Nut,Plain,Hexagon Gear Mtg | 2 |
222-7157 Control Gp-Thickness -Counterclockwise
| 13***77 | Lockout | 2 |
| 1A***75 | Bolt; (3/4-16x1.75in)(Fine Thread) | 8 |
| 1D***20 | Nut,Plain,Hexagon Gear Mtg | 2 |
8i-0734 Crown Gp-Manual
| 10***14 | Handle | 1 |
| 10***28 | Shaft As-Adjustment | 1 |
| 13***77 | Lockout | 1 |
196-2503 Jack Gp-Height Adjuster
| 10***64 | Bearing-Thrust | 2 |
| 11***49 | Worm | 1 |
| 19***03 | Jack Group-Height Adjuster | 1 |
185-4044 Jack Gp-Height Adjuster
| 18***65 | Jack Group-Height Adjuster | 1 |
| 18***44 | Jack Group-Height Adjuster | 1 |
| 1F***50 | Nut Rops Support | 1 |
109-0336 Motor Gp-Power Adjuster
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Pin-Grooved | 1 |
| 10***73 | Gasket | 1 |
8i-0730 Sloper Gp-Manual
| 10***14 | Handle | 2 |
| 13***77 | Lockout | 2 |
| 2D***35 | Locknut (Visor To Bracket) | 2 |
Cooling System
7c-5467 Adapter Gp-Fan
| 6I***37 | Adapter; (Fan) | 1 |
| 7C***67 | Adapter Group-Fan | 1 |
| 8T***77 | Bolt-Plt; (M8 X 1.25 X 90) | 6 |
4w-2913 Cooler Gp-Engine Oil
| 23***54 | Gasket | 1 |
| 23***55 | Gasket | 1 |
| 24***64 | Spring; (Yoke) | 1 |
100-6269 Cooler Gp-Engine Oil
| 10***69 | Cooler Group-Engine Oil | 1 |
| 23***55 | Gasket | 1 |
| 26***43 | Core As-Engine Oil Cooler | 1 |
104-7485 Cooling Gp-Supplemental
| 10***85 | Cooling Group-Supplemental | 1 |
| 10***76 | Hose-Upper; (Radiator)(Radiator) | 1 |
| 11***28 | Hose-Lower; (Radiator)(Radiator) | 1 |
7c-9048 Lines Gp-Water
| 12***47 | Housing-Water Regulating | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 12***71 | Clamp-Hose | 2 |
7c-4508 Pump Gp-Water
| 15***37 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
159-3137 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 15***37 | Pump Group-Water | 1 |
7c-7030 Pump Gp-Water
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
| 4J***24 | Seal 46.99 mm(1.85 In.) I.D. | 1 |
| 7C***38 | Pump Group-Water | 1 |
159-3142 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 15***42 | Pump Group-Water | 1 |
4w-7589 Pump Gp-Water
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
| 4J***24 | Seal 46.99 mm(1.85 In.) I.D. | 1 |
| 4W***89 | Pump Group-Water | 1 |
7c-6438 Pump Gp-Water
| 15***42 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
171-9705 Radiator Gp
| 03***64 | Cap As-Radiator; (7-Psi) | 1 |
| 17***05 | Radiator Group | 1 |
| 18***36 | Shroud | 1 |
Electrical And Starting System
244-1090 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 24***90 | Alarm Group; -Backup | 1 |
9w-3043 Alternator Gp-Charging
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 5 |
| 10***63 | Regulator As-Alternator; (24-Volt) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
9y-8187 Alternator Gp-Charging
| 4N***05 | Spacer; (0.42x0.75x0.6-In Thk) | 1 |
| 7C***63 | Bracket-Alternator | 1 |
| 7C***29 | Pulley-Alternator | 1 |
104-7451 Battery Gp
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 2 |
| 10***51 | Battery Group | 1 |
| 11***75 | Cable As | 1 |
175-7736 Box Gp-Junction
| 17***82 | Film-Warning; (High Voltage) | 1 |
| 17***83 | Film-Identification; (Electrical Outlet) | 1 |
| 17***36 | Box Group-Junction | 1 |
110-6825 Box Gp-Junction
| 03***38 | Screw; (6-32x1.0in) | 2 |
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 10***84 | Relay As; (24-Volt) | 1 |
154-9599 Box Gp-Junction
| 03***38 | Screw; (6-32x1.0in) | 4 |
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 6 |
175-7737 Box Gp-Junction
| 17***82 | Film-Warning; (High Voltage) | 1 |
| 17***83 | Film-Identification; (Electrical Outlet) | 1 |
| 17***37 | Box Group-Junction | 1 |
122-9309 Buffer Gp-Sensor -5000-Hz Pwm
| 12***09 | Buffer Group-Sensor; -5000-Hz Pwm-Conveyor Speed | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
122-9303 Buffer Gp-Sensor -Material Height
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
145-0891 Circuit Breaker & Relay Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 2 |
| 13***25 | Plate-Mounting | 1 |
154-9616 Circuit Breaker & Relay Gp
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
133-3765 Control Gp-Conveyor Electronic
| 13***65 | Control Group-Conveyor Electronic | 1 |
116-6215 Control Gp-Conveyor Electronic
| 11***15 | Control Group-Conveyor Electronic | 1 |
151-6257 Control Gp-Conveyor Electronic -Auger
| 14***19 | Sensor Group-Auger | 1 |
| 14***36 | Film-Identification; (Service Codes) | 1 |
| 15***57 | Control Group-Conveyor Electronic; -Auger | 1 |
171-7043 Control Gp-Manual Override
| 10***35 | Wire As | 3 |
| 11***68 | Wire As | 3 |
| 12***97 | Wire As | 1 |
117-5034 Control Gp-Manual Override
| 10***35 | Wire As | 3 |
| 11***91 | Resistor As | 1 |
| 11***34 | Control Group-Manual Override | 1 |
116-6223 Control Gp-Propel Electronic
| 11***23 | Control Group-Propel Electronic | 1 |
164-7359 Cover Gp-Wiring Harness
| 16***59 | Cover Group-Wiring Harness | 1 |
| 17***96 | Bracket-Mounting | 1 |
| 17***97 | Flange | 1 |
155-2651 Distributor Gp-Electronic
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***51 | Distributor Group-Electronic | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
104-7440 Electrical Ar
| 10***40 | Electrical Ar | 1 |
| 10***50 | Installation Group-Controls | 1 |
| 10***51 | Battery Group | 1 |
226-2400 Generator & Mtg Gp-Hydraulic -6 Kilowatts
| 08***56 | Nut | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***50 | Sleeve; (32-cm) | 0 |
226-2401 Generator & Mtg Gp-Hydraulic -8 Kilowatts
| 08***56 | Nut | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***50 | Sleeve; (32-cm) | 0 |
160-4233 Generator Gp-Hydraulic -8 Kilowatt
| 16***33 | Generator Group-Hydraulic; -8 Kilowatt | 1 |
| 17***42 | Ring-Slip | 1 |
| 17***44 | Fan | 1 |
179-8207 Generator Gp-Hydraulic -8 Kilowatt
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 08***56 | Nut | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
219-6313 Generator Gp-Hydraulic -8 Kilowatt
| 17***44 | Fan | 1 |
| 17***45 | Support | 2 |
| 17***46 | Brush | 6 |
179-8206 Generator Gp-Hydraulic -6 Kilowatt
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 08***56 | Nut | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
166-4141 Generator Gp-Hydraulic -6 Kilowatt
| 16***41 | Generator Group-Hydraulic; -6 Kilowatt | 1 |
| 17***42 | Ring-Slip | 1 |
| 17***43 | Rotor | 1 |
219-6308 Generator Gp-Hydraulic -6 Kilowatt
| 17***44 | Fan | 1 |
| 17***45 | Support | 2 |
| 17***46 | Brush | 6 |
194-6509 Harness As-Sensor -Engine Oil
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***09 | Harness As-Sensor; -Engine Oil | 1 |
158-8051 Harness As-Valve -Tow Point
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 15***51 | Harness As-Valve; -Tow Point | 1 |
104-7450 Installation Gp-Controls
| 10***00 | Kit-Connecting Plug; (12-Pin)(Electronic Control) | 14 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
166-2055 Installation Gp-Generator
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 6 |
| 08***56 | Nut | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
166-6282 Installation Gp-Generator
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 6 |
| 08***56 | Nut | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
116-8711 Lamp Gp-Warning Beacon
| 03***14 | Screw; (10-32x1-In) | 3 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 11***11 | Lamp Group-Warning Beacon | 1 |
9x-9556 Lamp Gp-Warning Beacon
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 3 |
| 6V***25 | Nut-Hard; (M6 X 1.0) | 3 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
128-6983 Lamp Gp-Warning Beacon -Rotating
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***83 | Lamp Group-Warning Beacon; -Rotating, Amber | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
116-8703 Lighting Gp-Flood
| 10***99 | Harness As-Lighting; (Floodlights)(Rear) | 4 |
| 10***29 | Plate | 2 |
| 11***03 | Lighting Group-Flood | 1 |
106-6610 Motor Gp-Electric
| 09***47 | Brush As | 1 |
| 10***10 | Motor Group-Electric | 1 |
| 11***94 | Bell; (Rear) | 1 |
170-7071 Motor Gp-Electric
| 09***47 | Brush As | 1 |
| 11***94 | Bell; (Rear) | 1 |
| 11***61 | Bearing | 2 |
145-8519 Sensor Gp-Auger
| 11***24 | Clamp | 2 |
| 14***19 | Sensor Group-Auger | 1 |
| 16***41 | Support-Sensor | 2 |
168-7855 Sensor Gp-Feeder
| 11***07 | Knob | 2 |
| 12***44 | Paddle As | 2 |
| 16***91 | Block As-Mounting; (Position Sensor) | 2 |
118-3465 Sensor Gp-Feeder
| 11***22 | Block As-Mounting | 2 |
| 11***07 | Knob | 2 |
| 11***65 | Sensor Group-Feeder | 1 |
214-4863 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
| 21***63 | Sensor Group-Position; -Rotary-Tc Impeller Clutch, Lh Pedal | 1 |
219-2385 Sensor Gp-Position
| 12***50 | Receptacle As | 1 |
| 12***51 | Bushing | 1 |
| 12***52 | Clamp As-Cable | 1 |
9x-5592 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 9X***92 | Sensor Group-Position; -Direction, Speed-Steering Pedal, Rh, Lh-Center Pedal | 1 |
147-1680 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***80 | Sensor Group-Position; -Direction, Speed-Steering Pedal, Rh, Lh-Center Pedal | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
284-8876 Sensor Gp-Position
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 28***76 | Sensor Group-Position | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
168-3551 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***51 | Sensor Group-Position; -Steering | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
121-7386 Sensor Gp-Position
| 12***86 | Sensor Group-Position | 1 |
| 12***50 | Receptacle As | 0 |
| 12***52 | Clamp As-Cable | 0 |
118-6240 Sensor Gp-Speed -Propel
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***40 | Sensor Group-Speed; -Propel | 1 |
| 16***09 | Nut-Special | 1 |
189-5746 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***49 | Strap; (Marker) | 1 |
7c-9458 Solenoid Gp-Shutoff
| 12***72 | Solenoid As; (Fuel Shutoff) | 1 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 1 |
| 6V***77 | Nut (8-32 Thd) | 2 |
134-2356 Starting Aid Gp -Air Inlet Heater
| 10***52 | Heater As; (22-Volt, 2160-Watt)(Air Inlet) | 1 |
| 10***47 | Strap-Grounding | 1 |
| 12***79 | Stud-Taperlock; (M8x1.25x130-mm) | 1 |
106-9086 Starting Aid Gp
| 10***86 | Starting Aid Group; (Heater) | 1 |
| 10***52 | Heater As; (22-Volt, 2160-Watt)(Air Inlet) | 1 |
| 10***46 | Hose | 1 |
102-8823 Starting Aid Gp
| 10***58 | Cover-Inlet Manifold | 1 |
| 10***62 | Elbow | 1 |
| 10***23 | Starting Aid Group; (Heater) | 1 |
104-7040 Starting Motor Gp-Electric
| 10***40 | Starting Motor Group-Electric | 1 |
| 10***57 | Starting Motor Group-Electric; Electric Starting Motor Group (Robert Bosch) | 1 |
| 6V***20 | Starting Motor Group-Electric; (Electric) | 1 |
207-1517 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
6v-5720 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
207-1511 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
106-8559 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
106-8557 Starting Motor Gp-Electric
| 10***57 | Starting Motor Group-Electric; Electric Starting Motor Group (Robert Bosch) | 1 |
| 7X***62 | Washer-Hard; (13.5x19x0.8-mm Thk) | 3 |
| 8F***34 | Lockwasher; (External Teeth) | 1 |
108-3858 Starting Motor Gp-Electric
| 10***40 | Starting Motor Group-Electric | 1 |
| 10***58 | Starting Motor Group-Electric | 1 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
106-8558 Starting Motor Gp-Electric
| 10***58 | Starting Motor Group-Electric | 1 |
| 10***59 | Starting Motor Group-Electric; Electric Starting Motor Group (Delco Remy) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
172-8660 Switch Gp-Liquid Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
123-2993 Switch Gp-Liquid Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***93 | Switch Group-Liquid Level; -Engine Oil-Ster, Fan Dr Oil (Engine On)-Torque Converter Oil-Torque Conv Oil (Low, Cold)-Front, Rear Engine Oil-Steering Oil, Engine Off-Torque Conv Oil (Low, Hot)-Auxiliary Coolant-Brake Oil, Hoist-Engine Coolant | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
132-4802 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 2 |
| 13***25 | Plate-Mounting | 1 |
187-6531 Wiring Gp-Engine
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
145-3390 Wiring Gp-Engine
| 11***66 | Mount | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 14***91 | Circuit Breaker & Relay Group | 1 |
148-3040 Wiring Gp-Engine
| 11***18 | Clip | 2 |
| 11***66 | Mount | 1 |
| 14***40 | Wiring Group-Engine | 1 |
134-2627 Wiring Gp-Engine
| 11***66 | Mount | 1 |
| 13***02 | Wiring Group-Engine | 1 |
| 13***27 | Wiring Group-Engine | 1 |
104-7452 Wiring Gp-Hydraulic Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***62 | Screw-Machine; (4-40x0.63-In) | 4 |
| 10***52 | Wiring Group-Hydraulic Control | 1 |
197-9828 Wiring Gp-Screed
| 19***98 | Panel Group-Electronic; -Material Height-Rh | 1 |
| 19***99 | Panel Group-Electronic; -Material Height-Lh | 1 |
| 19***28 | Wiring Group-Screed | 1 |
Electrical System
196-1299 Panel Gp-Electronic -Material Height-Lh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 13***48 | Potentiometer As; (Rh Conveyor Speed Dial) | 1 |
196-1298 Panel Gp-Electronic -Material Height-Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***83 | Relay-Time Delay; (Electric Heat) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
Engine Arrangement
105-4404 Engine Ar
| 10***23 | Starting Aid Group; (Heater) | 1 |
| 10***03 | Filler Group-Engine Oil | 1 |
| 10***63 | Cover Group-Cylinder Block | 1 |
143-0457 Engine Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
| 10***56 | Sender As-Pressure; (Oil) | 1 |
105-4765 Engine Ar
| 10***83 | Air Cleaner Group | 1 |
| 10***84 | Exhaust Group | 1 |
| 10***85 | Cooling Group-Supplemental | 1 |
133-4245 Engine Ar
| 10***69 | Cooler Group-Engine Oil | 1 |
| 10***39 | Housing Group-Front | 1 |
| 10***40 | Gear Group-Front | 1 |
105-4766 Engine Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
| 10***04 | Engine Ar | 1 |
178-9390 Engine Ar
| 10***85 | Cooling Group-Supplemental | 1 |
| 10***78 | Drive Group-Pump | 1 |
| 14***57 | Engine Ar | 1 |
159-5999 Engine Ar
| 10***69 | Cooler Group-Engine Oil | 1 |
| 10***39 | Housing Group-Front | 1 |
| 10***40 | Gear Group-Front | 1 |
Feeder Drag And Auger Conveyors
169-0899 Auger Gp
| 10***79 | Pin | 2 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
| 15***28 | Hose As | 2 |
106-9717 Bearing Gp-Auger
| 10***17 | Bearing Group-Auger | 1 |
| 11***94 | Bearing-Insert | 1 |
| 19***77 | Shield | 1 |
116-9509 Bearing Gp-Auger
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***09 | Bearing Group-Auger | 1 |
201-5584 Bearing Gp-Auger
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
| 20***84 | Bearing Group-Auger | 1 |
106-9718 Bearing Gp-Auger
105-9278 Chain Gp-Conveyor -Rh
| 10***78 | Chain Group-Conveyor; -Rh | 1 |
| 8I***14 | Bar-Side | 58 |
| 8I***15 | Bar-Side | 29 |
134-3956 Chain Gp-Conveyor -Lh
| 13***56 | Chain Group-Conveyor; -Lh | 1 |
| 8I***14 | Bar-Side | 58 |
| 8I***15 | Bar-Side | 29 |
107-5892 Chain Gp-Conveyor
| 10***78 | Chain Group-Conveyor; -Rh | 1 |
| 10***92 | Chain Group-Conveyor | 1 |
| 13***56 | Chain Group-Conveyor; -Lh | 1 |
104-7444 Conveyor Ar-Drag & Auger
| 10***44 | Conveyor Ar-Drag & Auger | 1 |
| 10***74 | Conveyor Group-Drag | 2 |
| 10***77 | Footshaft Group | 2 |
137-5514 Conveyor Gp-Auger
| 06***66 | Bolt; (3/4-10x1.642-In) | 12 |
| 07***87 | Ring-Retaining | 4 |
| 10***53 | Bar | 2 |
230-1539 Conveyor Gp-Auger
| 06***66 | Bolt; (3/4-10x1.642-In) | 6 |
| 10***55 | Plate | 1 |
| 10***57 | Slide As | 1 |
104-7475 Conveyor Gp-Auger
| 03***36 | Washer | 2 |
| 06***66 | Bolt; (3/4-10x1.642-In) | 12 |
| 07***87 | Ring-Retaining | 4 |
104-7474 Conveyor Gp-Drag
| 05***20 | Pin-Spring | 58 |
| 10***74 | Conveyor Group-Drag | 1 |
| 10***92 | Chain Group-Conveyor | 1 |
8i-0852 Drive Gp-Conveyor -Drag Conveyor
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 08***43 | Gear-Cluster | 3 |
185-0787 Drive Gp-Conveyor -Auger Conveyor
| 08***41 | Carrier As | 1 |
| 08***44 | Gear-Input | 1 |
| 08***83 | Washer; (Thrust) | 1 |
8i-0866 Drive Gp-Conveyor
| 08***44 | Gear-Input | 1 |
| 08***83 | Washer; (Thrust) | 1 |
| 09***78 | Pin-Spring | 3 |
5e-9826 Extension Gp-Auger -2-Ft, Rh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 5E***26 | Extension Group-Auger; -2-Ft, Rh | 1 |
5e-9809 Extension Gp-Auger -1-Ft, Rh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 5E***09 | Extension Group-Auger; -1-Ft, Rh | 1 |
5e-9825 Extension Gp-Auger -2-Ft, Lh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 5E***25 | Extension Group-Auger; -2-Ft, Lh | 1 |
5e-9808 Extension Gp-Auger -1-Ft, Lh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 5E***08 | Extension Group-Auger; -1-Ft, Lh | 1 |
1g-9347 Extension Gp-Auger -6 In
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 1G***48 | Tube | 2 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 2 |
104-7477 Footshaft Gp
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
129-3007 Guard Gp-Feeder
| 03***82 | Screw; (3/8-16x2-In) | 12 |
| 10***41 | Plate | 2 |
| 10***42 | Plate | 2 |
104-7479 Guard Gp-Feeder
| 03***82 | Screw; (3/8-16x2-In) | 12 |
| 10***79 | Guard Group-Feeder | 1 |
| 10***41 | Plate | 4 |
104-7458 Lubrication Gp-Feeder
| 10***58 | Lubrication Group-Feeder | 1 |
| 10***99 | Tube As | 1 |
| 10***01 | Tube As | 1 |
228-4458 Shaft Gp-Feeder Drive
| 03***21 | Bolt-Allen Hd; (3/8unc X 1) | 4 |
| 10***30 | Bearing-Flange | 1 |
| 10***70 | Key-Square | 1 |
129-4584 Shaft Gp-Feeder Drive
| 03***21 | Bolt-Allen Hd; (3/8unc X 1) | 4 |
| 10***30 | Bearing-Flange | 1 |
| 10***70 | Key-Square | 1 |
Frame And Body
104-7467 Arm Gp-Tow
| 03***83 | Spacer | 16 |
| 03***53 | Ring-Retaining | 2 |
| 05***74 | Pin | 2 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
109-2722 Bracket Gp-Support
| 06***66 | Bolt; (3/4-10x1.642-In) | 2 |
| 10***22 | Bracket Group-Support | 1 |
| 11***52 | Plate | 1 |
143-0455 Cover Gp-Engine & Platform
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 8 |
| 03***72 | Bolt; (3/8-16-Thd) | 11 |
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
171-5926 Cover Gp-Engine & Platform
| 17***45 | Panel | 1 |
| 17***47 | Cover As-Louver | 1 |
| 17***26 | Cover Group-Engine & Platform | 1 |
104-7466 Cover Gp-Engine & Platform
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 8 |
| 03***72 | Bolt; (3/8-16-Thd) | 9 |
| 10***03 | Panel; (N.S.) | 2 |
135-5256 Cover Gp-Engine & Platform
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 8 |
| 03***72 | Bolt; (3/8-16-Thd) | 11 |
| 10***03 | Panel; (N.S.) | 2 |
147-6567 Cover Gp-Platform
| 11***62 | Washer | 4 |
| 14***67 | Cover Group-Platform | 1 |
| 14***47 | Plate-Cover | 1 |
217-0588 Cover Gp-Platform
| 10***56 | Rod; (Prop) | 1 |
| 14***41 | Shim; (6-mm Thk)(6 mm Thk) | 1 |
| 14***57 | Shim; (2-mm Thk)(2 mm Thk) | 1 |
110-1530 Deflector Gp
| 11***30 | Deflector Group | 1 |
| 12***50 | Plate | 1 |
| 12***51 | Plate | 1 |
215-7553 Extension Gp-Main Frame
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
106-9714 Extension Gp-Main Frame -1 Ft
| 10***14 | Extension Group-Main Frame; -1 Ft | 1 |
| 10***88 | Extension As | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 3 |
116-9510 Extension Gp-Main Frame
| 11***10 | Extension Group-Main Frame | 1 |
| 12***73 | Extension As | 2 |
| 12***78 | Bar | 2 |
106-9715 Extension Gp-Main Frame -2 Ft
| 10***15 | Extension Group-Main Frame; -2 Ft | 1 |
| 10***90 | Extension As | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 3 |
104-7464 Frame As
| 10***64 | Frame As | 1 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 4 |
| 11***52 | Frame As | 1 |
222-0884 Frame As
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 4 |
| 16***87 | Tube | 6 |
| 17***80 | Bar | 4 |
168-0232 Guard Gp-Deflector
| 16***99 | Guard; (Lh) | 1 |
| 16***00 | Guard; (Rh) | 1 |
| 16***09 | Deflector | 1 |
104-6579 Guide Gp-Steering
| 03***74 | Keeper | 1 |
| 10***79 | Guide Group-Steering | 1 |
| 10***39 | Tube As | 1 |
105-4763 Hopper Gp
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 4 |
| 0S***49 | Stud (2" Long) | 4 |
| 10***48 | Pin As | 2 |
135-0494 Hopper Gp
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 4 |
| 10***49 | Pin As | 2 |
| 10***20 | Bar | 1 |
169-9539 Hopper Gp
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 10***15 | Apron As | 2 |
150-0032 Installation Ar-Ventilation
| 14***28 | Ventilation Group-Paver | 1 |
| 14***16 | Lines Group-Paver Ventilation | 1 |
| 15***32 | Installation Ar-Ventilation | 1 |
173-7690 Kit-Hopper
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 16***85 | Pin As | 2 |
| 16***86 | Tube | 8 |
177-4286 Lines Gp-Grease
| 10***01 | Tube As | 1 |
| 10***03 | Tube As | 2 |
| 10***04 | Tube As | 1 |
173-2661 Plate Gp
| 17***61 | Plate Group | 1 |
118-7295 Step Gp
| 11***15 | Step As | 1 |
| 11***34 | Bracket As; (Rh) | 1 |
| 11***03 | Bracket As; (Lh) | 1 |
104-7442 Structural Ar
| 10***79 | Guide Group-Steering | 1 |
| 10***42 | Structural Ar | 1 |
| 10***64 | Frame As | 1 |
169-5471 Support Gp-Frame
| 10***89 | Brace Group | 1 |
| 10***22 | Bracket Group-Support | 1 |
| 16***71 | Support Group-Frame | 1 |
104-7468 Support Gp-Tow Arm
| 06***35 | Lock Pin | 2 |
| 10***68 | Support Group-Tow Arm | 1 |
| 10***37 | Lever As | 1 |
109-4205 Suppression Gp-Sound
| 10***05 | Suppression Group-Sound | 1 |
| 10***62 | Foam | 1 |
| 10***63 | Foam | 1 |
142-0336 Suppression Gp-Sound
| 10***64 | Foam | 2 |
| 10***65 | Foam | 2 |
| 10***66 | Foam | 4 |
173-2020 Suppression Gp-Sound
| 10***66 | Foam | 4 |
| 11***62 | Washer | 3 |
| 14***07 | Nail | 16 |
106-9681 Tube As -Ski Tow
| 10***81 | Tube As; -Ski Tow | 1 |
147-6555 Ventilation Gp-Paver
| 10***39 | Key-Square | 1 |
| 11***62 | Washer | 5 |
| 14***00 | Inlet-Blower | 1 |
146-7628 Ventilation Gp-Paver
| 11***62 | Washer | 5 |
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
Fuel System
129-1102 Base Gp-Fuel Filter
| 11***23 | Insert-Fuel Filter | 1 |
| 12***01 | Valve Group-Check; -Fuel-Fuel Filter | 1 |
| 12***02 | Base Group-Fuel Filter | 1 |
105-1695 Control Gp-Fuel Injection
| 10***95 | Control Group-Fuel Injection | 1 |
| 16***56 | Control Group-Fuel Injection | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 4 |
7w-6989 Control Gp-Fuel Injection
| 16***56 | Control Group-Fuel Injection | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 4 |
| 7W***89 | Control Group-Fuel Injection; Fuel Injection Control Group | 1 |
7e-9429 Control Gp-Governor
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 1 |
| 6I***82 | Lever As | 1 |
| 6I***83 | Spring | 2 |
7e-8794 Drive Gp-Gov & Transfer Pump
| 10***68 | Gear As-Drive; (44-Teeth), . Body | 1 |
| 10***85 | Lever-Shutoff; (Output) | 1 |
| 1W***65 | Ring-Retaining | 1 |
7w-4812 Fastener Gp-Fuel Inj Pump
| 1T***68 | Seal-O-Ring; (Fuel Injection Pump) | 1 |
| 6F***73 | Seal--To Top Cover On Selector Valve | 1 |
| 6V***18 | Bolt (M8x1.25x45mm); (M8x1.25x35-mm) | 3 |
6i-2693 Filter Gp-Fuel
| 1R***51 | Filter-Fuel; (Advanced Efficiency)(High Efficiency) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6I***93 | Filter Group-Fuel; Fuel Filter Group (2z F3772-Up) | 1 |
9y-0283 Fitting Gp-Fuel Lines
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
| 5P***24 | Elbow-90 Degree | 2 |
| 9Y***83 | Fitting Group-Fuel Lines | 1 |
129-1213 Governor Gp-Unit Injector
| 12***13 | Governor Group-Unit Injector | 1 |
| 13***99 | Governor Group-Unit Injector | 1 |
| 7W***12 | Fastener Group-Governor; Fastener Group(Governor) (~1c K5811) | 1 |
110-2397 Governor Gp-Unit Injector
| 11***26 | Governor Group-Unit Injector | 1 |
| 11***97 | Governor Group-Unit Injector | 1 |
| 7W***12 | Fastener Group-Governor; Fastener Group(Governor) (~1c K5811) | 1 |
110-2326 Governor Gp-Unit Injector
| 11***26 | Governor Group-Unit Injector | 1 |
| 13***23 | Governor Group-Unit Injector | 1 |
| 4P***41 | Cam-Torque | 1 |
130-7323 Governor Gp-Unit Injector
| 10***12 | Clevis | 1 |
| 10***13 | Piston-Servo | 1 |
| 10***87 | Ring-Tolerance | 1 |
131-7899 Governor Gp-Unit Injector
| 13***23 | Governor Group-Unit Injector | 1 |
| 13***89 | Cam-Torque | 1 |
| 13***99 | Governor Group-Unit Injector | 1 |
6i-4267 Governor Gp-Unit Injector
| 10***12 | Clevis | 1 |
| 10***13 | Piston-Servo | 1 |
| 11***03 | Lever Assem. | 1 |
9y-3943 Lines Gp-Fuel Ratio Control
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 1 |
149-1350 Lines Gp-Fuel Filter
| 00***64 | End; (Hose) | 2 |
| 09***61 | Strap; (Cable) | 1 |
| 10***29 | Hose; (60-cm) | 0 |
6i-2420 Lines Gp-Fuel Filter
| 06***26 | Cap-Tube | 1 |
| 11***84 | Tee-O-Ring Port | 1 |
| 11***33 | Tube As | 1 |
7w-8434 Lines Gp-Governor Oil
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 2 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 2 |
| 6V***28 | Elbow-Face Seal (For 6.35mm Od Tube) | 1 |
192-4302 Pump Gp-Fuel
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
| 13***76 | Strainer; (Fuel Pump) | 1 |
1g-7988 Pump Gp-Fuel
| 10***60 | Plug | 1 |
| 1G***88 | Pump Group-Fuel | 1 |
| 5E***40 | Plug-By-Pass | 1 |
137-2525 Pump Gp-Fuel
| 13***25 | Pump Group-Fuel | 1 |
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
107-7732 Pump Gp-Fuel Injection
| 10***32 | Pump Group-Fuel Injection | 1 |
| 11***18 | Seal-O-Ring; (26.64mm Id) | 1 |
| 12***74 | Seal-O-Ring; (7.59mm'Id) | 1 |
7e-7607 Pump Gp-Unit Injection
| 10***30 | Injector Group-Fuel | 1 |
| 11***18 | Seal-O-Ring; (26.64mm Id) | 1 |
| 12***74 | Seal-O-Ring; (7.59mm'Id) | 1 |
8n-6201 Pump Gp-Fuel Prm & Prim Filter
| 1L***69 | Ring-Retaining | 1 |
| 2H***29 | Ring - Retaining External | 1 |
| 2J***57 | Packing,Preformed Screw Assembly Part Of Kit P/N 5r***25 | 1 |
8n-6200 Pump Gp-Fuel Priming
| 13***41 | Pump Group-Fuel Priming; (Hand) | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
| 1P***36 | Gasket; (Fuel Priming Pump)(Fuel Priming Pump) | 1 |
7e-7604 Pump Gp-Fuel Prm & Prim Filter
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
4p-7206 Pump Gp-Fuel Prm & Prim Filter
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
| 1H***71 | Seal 20.22 mm(.796 In.)I. D. | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
159-7574 Pump Gp-Fuel Prm & Prim Filter
| 14***83 | Separator Group-Water | 1 |
| 15***74 | Pump Group-Fuel Prm & Prim Filter | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 4 |
149-5380 Pump Gp-Fuel Transfer
| 08***68 | Spacer | 1 |
| 10***10 | Motor Group-Electric | 1 |
| 13***25 | Pump Group-Fuel | 1 |
149-2683 Separator Gp-Water
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
143-0460 Tank & Pump Gp-Fuel
| 10***49 | Plate | 2 |
| 11***68 | Hose As | 1 |
| 11***72 | Filter Group-Fuel; (Fuel) | 1 |
106-6608 Tank & Pump Gp-Fuel
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 08***68 | Spacer | 1 |
| 10***14 | Tank As-Fuel | 1 |
158-6216 Tank Gp-Fuel
| 15***95 | Tank As-Fuel | 1 |
| 15***42 | Coupling-Half | 1 |
| 15***93 | Hose As | 1 |
174-6314 Tank Gp-Fuel
| 16***28 | Hose As | 1 |
| 16***29 | Hose As | 1 |
| 16***29 | Tank As-Fuel | 1 |
129-1101 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 12***01 | Valve Group-Check; -Fuel-Fuel Filter | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
141-8288 Valve Gp-Fuel Relief
| 14***87 | Spring | 1 |
| 14***88 | Valve Group-Fuel Relief | 1 |
| 2W***94 | Plunger As-Valve | 1 |
Grade References
109-5627 Leveler Gp -40-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5624 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5626 Leveler Gp -Outboard
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5628 Leveler Gp -30-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5622 Leveler Gp -40-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5625 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 7 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5623 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
Hydraulic System
077-3951 Cap Gp-Hydraulic Oil Filler
| 07***51 | Cap As-Filler Breather | 1 |
| 07***32 | Filter Element-Breather; (Hydraulic Oil Filter) | 1 |
| 07***26 | Gasket | 2 |
104-7462 Cooler Gp-Hydraulic Oil
| 08***56 | Nut | 2 |
| 10***62 | Cooler Group-Hydraulic Oil | 1 |
| 12***47 | Hose As | 1 |
141-7578 Cooler Gp-Hydraulic Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 13***69 | Mounting Group-Hydraulic Oil Cooler | 2 |
172-9252 Cooler Gp-Hydraulic Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 13***69 | Mounting Group-Hydraulic Oil Cooler | 2 |
107-0473 Cylinder Gp-Hydraulic
| 03***39 | Ring-Back-Up | 1 |
| 09***29 | Lockwire | 1 |
| 10***73 | Cylinder Group-Hydraulic | 1 |
203-4275 Cylinder Gp-Hydraulic -Auger Hoist, Rh
| 20***75 | Cylinder Group-Hydraulic; -Auger Hoist, Rh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 24***14 | Kit-Seal; (Auger Hoist) | 1 |
174-3072 Cylinder Gp-Hydraulic -Auger, Rh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 07***85 | Washer | 1 |
| 11***60 | Shim; (3-mm Thk) | 1 |
135-9444 Cylinder Gp-Hydraulic -Tow Point
| 13***44 | Cylinder Group-Hydraulic; -Tow Point | 1 |
| 17***34 | Kit-Seal; (Towpoint Cylinder) | 1 |
| 17***36 | Ring-Wear | 1 |
8c-9493 Cylinder Gp-Hydraulic -Track Tension
| 2K***68 | Locknut | 1 |
| 4B***06 | Setscrew-Socket; (1/4-20x0.25-In) | 1 |
| 4K***86 | Seal (1.114" Inside Diameter) | 1 |
203-4274 Cylinder Gp-Hydraulic -Screed Hoist
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 20***74 | Cylinder Group-Hydraulic; -Screed Hoist | 1 |
| 23***05 | Kit-Seal; (Screed Hoist Cylinder) | 1 |
241-1022 Cylinder Gp-Hydraulic
| 24***22 | Cylinder Group-Hydraulic | 1 |
| 24***11 | Ring-Retaining | 1 |
| 25***75 | Kit-Seal; (Auger Hoist) | 1 |
241-1020 Cylinder Gp-Hydraulic
| 24***73 | Ring-Retaining | 1 |
| 24***20 | Cylinder Group-Hydraulic | 1 |
| 24***14 | Kit-Seal; (Auger Hoist) | 1 |
133-0959 Cylinder Gp-Hydraulic
| 03***39 | Ring-Back-Up | 1 |
| 09***29 | Lockwire | 1 |
| 11***11 | Kit-Seal | 1 |
203-4276 Cylinder Gp-Hydraulic -Auger Hoist, Lh
| 20***76 | Cylinder Group-Hydraulic; -Auger Hoist, Lh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 25***75 | Kit-Seal; (Auger Hoist) | 1 |
174-3073 Cylinder Gp-Hydraulic -Auger, Lh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 17***73 | Cylinder Group-Hydraulic; -Auger, Lh | 1 |
| 17***07 | Kit-Seal; (Hydraulic Cylinder) | 1 |
8i-0938 Cylinder Gp-Hydraulic
| 10***52 | Seal-Wiper | 1 |
| 10***53 | Plug-Nylon | 1 |
| 11***46 | Ring | 1 |
135-0220 Cylinder Gp-Hydraulic -Hopper
| 13***20 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 13***21 | Kit-Seal; (Hopper Cylinder) | 1 |
| 5E***32 | Ring | 1 |
121-0412 Cylinder Gp-Hydraulic
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 08***25 | Ring; (Backup) | 1 |
| 08***23 | Seal | 1 |
8i-0992 Cylinder Gp-Hydraulic
| 03***39 | Ring-Back-Up | 1 |
| 10***51 | Seal-Polypak | 1 |
| 10***52 | Seal-Wiper | 1 |
7x-9958 Filter Gp-Oil
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 05***15 | Gasket | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 17***15 | Filter Group-Oil; -Hydraulic Tank | 1 |
177-0264 Filter Gp-Oil -Hydraulic, Conveyor
| 12***73 | Filter-Oil; (Standard Efficiency)(Oil) | 1 |
| 17***64 | Filter Group-Oil; -Hydraulic, Conveyor | 1 |
| 17***22 | Bowl | 1 |
123-2872 Filter Gp-Oil
| 03***36 | Seal-O-Ring | 1 |
| 11***35 | Seal-Bowl | 1 |
| 12***72 | Filter Group-Oil | 1 |
104-7441 Hydraulic Ar
| 10***41 | Hydraulic Ar | 1 |
| 10***55 | Lines Group-Propel | 1 |
| 10***56 | Lines Group-Conveyor | 1 |
107-0482 Lines Gp-Brake & Shift
| 08***86 | Clamp | 4 |
| 10***82 | Lines Group-Brake & Shift | 1 |
| 11***70 | Hose As | 2 |
104-7456 Lines Gp-Conveyor
| 03***92 | Seal; (126.59mm Id) | 1 |
| 03***47 | Spacer | 3 |
| 06***51 | Clamp | 2 |
228-4460 Lines Gp-Conveyor
| 03***92 | Seal; (126.59mm Id) | 1 |
| 03***47 | Spacer | 3 |
| 06***51 | Clamp | 2 |
107-0481 Lines Gp-Grade & Slope
| 10***81 | Lines Group-Grade & Slope | 1 |
| 13***04 | Hose As | 2 |
| 13***05 | Hose As | 2 |
107-0478 Lines Gp-Hopper
| 08***56 | Nut | 7 |
| 10***90 | Hose As | 2 |
| 10***41 | Hose As | 2 |
187-1758 Lines Gp-Hydraulic
| 11***80 | Hose As | 1 |
| 18***58 | Lines Group-Hydraulic | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
148-1516 Lines Gp-Paver Ventilation
| 10***39 | Key-Square | 1 |
| 14***51 | Valve-Flow Control; (Blower Motor) | 1 |
| 14***05 | Hose As | 1 |
228-6375 Lines Gp-Screed Drive
| 10***57 | Connector | 1 |
| 11***53 | Hose As | 1 |
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
107-1005 Lines Gp-Screed Drive
| 10***99 | Pump Group-Gear | 1 |
| 10***05 | Lines Group-Screed Drive | 1 |
| 10***57 | Connector | 1 |
107-0480 Lines Gp-Screed Elevation
| 10***79 | Pin | 4 |
| 10***80 | Lines Group-Screed Elevation | 1 |
| 11***55 | Hose As | 1 |
107-0483 Lines Gp-Throttle
| 08***86 | Clamp | 6 |
| 10***83 | Lines Group-Throttle | 1 |
| 10***01 | Bracket-Clevis | 1 |
107-0479 Lines Gp-Track Tension
| 08***73 | Clamp | 4 |
| 08***42 | Valve Group-Relief; -Track Tension | 2 |
| 09***51 | Hose As | 1 |
107-0484 Lines Gp-Truck Hitch
| 08***73 | Clamp | 4 |
| 10***84 | Lines Group-Truck Hitch | 1 |
| 11***61 | Tube As | 1 |
194-3680 Manifold Gp-Control
| 10***21 | Plug | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***09 | Kit-Bolt | 1 |
119-4360 Manifold Gp-Control
| 10***21 | Plug | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***09 | Kit-Bolt | 1 |
197-4575 Manifold Gp-Control -Propel
| 10***21 | Plug | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***09 | Kit-Bolt | 1 |
127-5435 Manifold Gp-Cooling
| 12***35 | Manifold Group-Cooling | 1 |
| 13***15 | Valve-Check | 2 |
| 7M***85 | Seal,Adapter,Motor Part Of Kit P/N 5r***29 | 6 |
107-0002 Manifold Gp-Suction
| 10***02 | Manifold Group-Suction | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
156-7026 Motor Gp-Gear
| 10***50 | Seal-Shaft | 1 |
| 10***40 | Ball Bearing | 1 |
| 10***41 | Ring-Snap | 1 |
227-3031 Motor Gp-Gear -Hydraulic Generator
| 08***91 | Valve As-Check; (Hydraulic Fan Oil) | 1 |
| 12***47 | Kit-Seal; (Check Valve) | 1 |
| 13***35 | Seal-Shaft | 1 |
6r-2203 Motor Gp-Gear
| 1G***84 | Kit-Seal | 1 |
| 1G***85 | Bearing As | 2 |
| 1G***86 | Flange | 1 |
197-1728 Motor Gp-Gear -Blower Fan
| 16***39 | Shim; (1.75-mm Thk) | 1 |
| 19***28 | Motor Group-Gear; -Blower Fan | 1 |
| 1F***22 | Bearing (.500" Long) | 4 |
223-0581 Motor Gp-Piston -Drag Conveyor
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
8i-0843 Motor Gp-Piston
| 1G***74 | Piston | 7 |
| 1G***75 | Guide-Slipper | 1 |
| 1J***74 | Ring-Retaining | 2 |
105-8882 Motor Gp-Piston -Propel
| 03***20 | Ring | 4 |
| 07***53 | Pin; (Spring) | 4 |
| 10***82 | Motor Group-Piston; -Propel | 1 |
240-7325 Pump & Mtg Gp-Screed Vibratory
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
| 14***44 | Connector Group | 1 |
| 14***57 | Elbow As. | 1 |
267-9475 Pump Gp-Gear -Screed
| 24***41 | Kit-Solenoid Valve; (Screed Gear Pump) | 1 |
| 26***75 | Pump Group-Gear; -Screed | 1 |
| 26***42 | Kit-Seal | 1 |
226-2451 Pump Gp-Gear -Screed
| 22***51 | Pump Group-Gear; -Screed | 1 |
| 24***29 | Kit-Seal; (Screed Gear Pump) | 1 |
| 24***41 | Kit-Solenoid Valve; (Screed Gear Pump) | 1 |
104-4199 Pump Gp-Gear
| 10***99 | Pump Group-Gear | 1 |
| 11***64 | Kit-Valve Seal | 1 |
| 13***93 | Kit-Pump Seal | 1 |
8i-0836 Pump Gp-Piston -Auxiliary
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 2 |
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 8 |
| 05***33 | Seal | 1 |
154-6612 Pump Gp-Piston -Drag Conveyor, Auger Conveyor
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 1 |
105-8880 Pump Gp-Piston -Propel
| 03***04 | Key | 1 |
| 03***05 | Seal-O-Ring | 2 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
154-6613 Pump Gp-Piston -Drag Conveyor, Auger Conveyor
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 2 |
8i-0961 Pump Gp-Piston
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 1 |
160-5113 Pump Gp-Piston
| 00***63 | Seal-O-Ring; (55.24mm Id) | 2 |
| 03***16 | Bolt-Self Locking; (1/4unc X 3/4) | 8 |
| 10***52 | Cover-Pintle | 2 |
105-8881 Pump Gp-Piston -Propel
| 03***04 | Key | 1 |
| 03***05 | Seal-O-Ring | 2 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
8i-0962 Pump Gp-Piston
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 2 |
6e-6569 Rotating Gp-Pump
| 00***55 | Ring-Retaining | 1 |
| 3T***49 | Bolt-Socket Hd; (M6 X 1.0 X 25) | 4 |
| 6E***69 | Rotating Group-Pump; -Implement | 1 |
9t-2031 Rotating Gp-Pump
104-8677 Tank Gp-Hydraulic
111-1326 Tank Gp-Hydraulic
134-4720 Valve Gp-Bank
216-7961 Valve Gp-Control -Conveyor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***29 | Nut-Retaining | 2 |
| 10***33 | Valve-Check | 1 |
115-7183 Valve Gp-Control -Right Grade, Hopper
107-1191 Valve Gp-Control -Steering
154-1424 Valve Gp-Control -Conveyor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***29 | Nut-Retaining | 2 |
| 10***33 | Valve-Check | 1 |
160-2451 Valve Gp-Control -Flow
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***16 | Solenoid As | 1 |
| 13***11 | Valve-Check | 1 |
115-0060 Valve Gp-Control
169-0166 Valve Gp-Counterbalance
| 07***27 | Kit-Seal; (Counterbalance Valve) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 12***16 | Solenoid As | 2 |
132-7429 Valve Gp-Manifold
| 13***29 | Valve Group-Manifold | 1 |
| 13***92 | Valve-Solenoid | 1 |
| 13***93 | Valve-Relief | 1 |
168-8609 Valve Gp-Pressure Reducing
| 16***09 | Valve Group-Pressure Reducing; -Truck Hitch | 1 |
| 17***45 | Kit-Seal; (Pressure Reducing Valve) | 1 |
| 17***46 | Valve | 1 |
152-7576 Valve Gp-Pump Control -Conveyor
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 12***32 | Setscrew-Socket; (M8x1.25x45-mm) | 2 |
257-5145 Valve Gp-Pump Control -Auxiliary Pump
| 25***45 | Valve Group-Pump Control; -Auxiliary Pump | 1 |
| 4J***33 | Seal Fuel Injection Pump | 1 |
| 5L***58 | Seal 14 mm(.551 In.) I. D. | 1 |
196-6988 Valve Gp-Pump Control
| 19***62 | Pin | 1 |
| 19***64 | Body | 1 |
| 19***88 | Valve Group-Pump Control | 1 |
087-1442 Valve Gp-Relief -Track Tension
| 08***42 | Valve Group-Relief; -Track Tension | 1 |
| 6R***80 | Valve As; (Relief) | 1 |
| 6R***81 | Valve As; (Needle) | 1 |
4t-1860 Valve Gp-Shuttle
| 14***03 | Seal-O-Ring | 1 |
| 14***04 | Ring-Backup | 2 |
| 14***05 | Ring-Backup | 2 |
113-2691 Valve Gp-Solenoid
| 08***83 | Body | 2 |
| 08***85 | Spring | 4 |
| 08***86 | Washer | 4 |
Implements
105-9685 Extension Ar -1' X 26"
| 10***85 | Extension Ar; -1' X 26" | 1 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 5 |
130-2151 Extension Ar
| 10***85 | Extension Ar; -1' X 26" | 2 |
| 10***14 | Extension Group-Main Frame; -1 Ft | 2 |
| 11***10 | Extension Group-Main Frame | 1 |
185-5433 Extension Ar-Auger
| 18***33 | Extension Ar-Auger | 1 |
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 21***53 | Extension Group-Main Frame | 4 |
8i-0522 Extension Gp-Screed
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***22 | Plate | 1 |
| 10***32 | Bar-Spacer | 1 |
111-1370 Hitch Ar-Truck
| 11***70 | Hitch Ar-Truck | 1 |
| 13***82 | Hitch Group-Truck | 1 |
| 1D***18 | Nut-Plt-Jam; (5/8unc) | 1 |
111-1368 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***28 | Arm As | 2 |
133-8682 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
166-7677 Hitch Gp-Truck
| 14***18 | Connector As | 1 |
| 16***05 | Connector As | 1 |
| 16***76 | Hitch Group-Truck; -Oscillating | 1 |
166-7676 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
180-9348 Indicator Gp-Depth
| 17***32 | Film-Identification; (Tow Point Indicator) | 2 |
| 17***73 | Plate | 2 |
| 17***33 | Bar | 2 |
116-5903 Installation Ar-Truck Hitch
| 10***84 | Lines Group-Truck Hitch | 1 |
| 11***03 | Installation Ar-Truck Hitch | 1 |
| 16***77 | Hitch Group-Truck | 1 |
104-7655 Plate Gp-Bevel End
| 10***55 | Plate Group-Bevel End | 1 |
| 12***27 | Plate As | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
104-7872 Plate Gp-Bevel End
| 10***72 | Plate Group-Bevel End | 1 |
| 12***37 | Plate As | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
104-7871 Plate Gp-Bevel End
| 10***71 | Plate Group-Bevel End | 1 |
| 12***36 | Plate As | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
104-7654 Plate Gp-Bevel End
| 10***54 | Plate Group-Bevel End | 1 |
| 12***26 | Plate As | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
104-7874 Plate Gp-Bevel End
| 10***74 | Plate Group-Bevel End | 1 |
| 12***39 | Plate As | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
104-7653 Plate Gp-Bevel End
| 10***53 | Plate Group-Bevel End | 1 |
| 12***25 | Plate As | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
104-7873 Plate Gp-Bevel End
| 10***73 | Plate Group-Bevel End | 1 |
| 12***38 | Plate As | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
104-7656 Plate Gp-Bevel End
| 10***56 | Plate Group-Bevel End | 1 |
| 12***28 | Plate As | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
102-4643 Roller Ar-Push
| 10***43 | Roller Ar-Push | 1 |
| 10***27 | Roller Group-Push | 1 |
| 5C***66 | Bolt (25 mm Long); (5/8-11x1-In) | 1 |
102-4646 Roller Ar-Push
| 10***46 | Roller Ar-Push | 1 |
| 11***58 | Screw; 12-Point Screw, Screw, Roller Group-Push | 1 |
| 5C***66 | Bolt (25 mm Long); (5/8-11x1-In) | 1 |
102-5927 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 10***40 | Cover-End | 2 |
| 10***42 | Housing As-Push Roller | 1 |
118-8358 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 10 |
| 11***57 | Roller As | 1 |
| 11***58 | Screw; 12-Point Screw, Screw, Roller Group-Push | 1 |
104-4482 Shoe Gp-Cutoff
| 10***82 | Shoe Group-Cutoff | 1 |
| 10***82 | Shoe As-Cutoff; (1 Foot) | 1 |
| 10***88 | Shoe As-Cutoff; (2 Foot) | 1 |
Lubrication System
1n-3477 Breather Gp -Crankcase
131-4810 Breather Gp -Crankcase
| 13***10 | Breather Group; -Crankcase | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 4P***36 | Base | 1 |
103-0803 Filler Gp-Engine Oil
| 10***03 | Filler Group-Engine Oil | 1 |
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
| 6L***09 | Seal-Rubber | 1 |
7c-0271 Filter Gp-Engine Oil
| 1R***39 | Filter As-Engine Oil; (Standard Efficiency) | 1 |
| 24***64 | Spring; (Yoke) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
4p-8183 Filter Gp-Engine Oil
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 23***54 | Gasket | 1 |
| 24***64 | Spring; (Yoke) | 2 |
7w-8420 Fumes Disposal Gp
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 1 |
| 7C***52 | Hose-Disposal; (Fumes)(Fumes) | 1 |
110-9674 Gauge Gp-Oil Level (Dipstick)
| 11***74 | Gauge Group-Oil Level (Dipstick) | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 4P***56 | Gauge-Oil Level (Dipstick) | 1 |
4w-2914 Lines Gp-Engine Oil
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
| 4W***14 | Lines Group-Engine Oil | 1 |
4p-7703 Lines Gp-Turbocharger Oil
| 11***19 | Tube As | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 1S***57 | Gasket; (Turbocharger-Oil Supply) | 1 |
1w-6030 Lines Gp-Turbocharger Oil
| 1S***57 | Gasket; (Turbocharger-Oil Supply) | 1 |
| 1W***30 | Lines Group-Turbocharger Oil | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
119-2924 Pump Gp-Engine Oil
| 10***05 | Spring | 1 |
| 11***24 | Pump Group-Engine Oil | 1 |
| 2W***77 | Body As-Oil Pump | 1 |
115-4138 Pump Gp-Engine Oil
| 11***23 | Pump Group-Engine Oil | 1 |
| 11***38 | Pump Group-Engine Oil | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
4w-2195 Pump Gp-Engine Oil
| 11***24 | Pump Group-Engine Oil | 1 |
| 4W***95 | Pump Group-Engine Oil; Engine Oil Pump Group | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
115-4123 Pump Gp-Engine Oil
| 10***05 | Spring | 1 |
| 11***74 | Shaft As | 1 |
| 11***16 | Shaft As-Idler | 1 |
200-4497 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
103-9408 Valve Gp-Fluid Sampling
| 10***08 | Valve Group-Fluid Sampling; -Coolant | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
Machine Arrangement
114-9485 Common Ar
| 10***40 | Electrical Ar | 1 |
| 10***41 | Hydraulic Ar | 1 |
| 10***42 | Structural Ar | 1 |
104-7439 Common Ar
| 10***39 | Common Ar | 1 |
| 10***40 | Electrical Ar | 1 |
| 10***41 | Hydraulic Ar | 1 |
195-9753 Kit-Maintenance
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
| 10***87 | Switch As-Toggle; (Screed Raise/Hld/Float) | 1 |
Operator Station
104-7449 Console Ar
| 10***49 | Console Ar | 1 |
| 10***73 | Console Group-Operator | 1 |
104-7473 Console Gp-Operator
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 4 |
| 03***49 | Nut-Self Lock; (No.10.Unc) | 4 |
| 08***53 | Bolt; (3/8-16x0.625-In)(3/8-16-2a Thd) | 2 |
114-0322 Gauge Gp-Cluster
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***22 | Gauge Group-Cluster | 1 |
| 11***81 | Kit-Gauge Housing | 1 |
104-7454 Horn & Alarm Gp
| 10***54 | Horn & Alarm Group | 1 |
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 1 |
132-3090 Lever Gp-Propel
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
199-8398 Module Gp-Speedometer & Tach
| 19***98 | Module Group-Speedometer & Tach | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 5 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 5 |
154-9597 Panel Gp-Instrument
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 07***00 | Switch As-Toggle; (Starter Engine Battery Charger) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
132-1181 Panel Gp-Instrument
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 07***00 | Switch As-Toggle; (Starter Engine Battery Charger) | 1 |
| 08***41 | Switch; (Machine/Engine Remote Stop) | 1 |
104-7470 Platform Gp
| 10***70 | Platform Group | 1 |
| 10***47 | Pin | 2 |
| 11***11 | Armrest As | 2 |
119-1784 Seat Gp
| 11***84 | Seat Group | 1 |
| 19***76 | Kit-Armrest; (Lh) | 1 |
| 19***77 | Kit-Armrest; (Rh) | 1 |
104-7448 Seat Gp
| 10***32 | Seat Group | 1 |
| 10***48 | Seat Group | 1 |
| 17***72 | Seat Group | 1 |
270-2417 Seat Gp -Vinyl
| 27***17 | Seat Group; -Vinyl | 1 |
| 27***19 | Arm; (Lh) | 1 |
| 27***80 | Arm; (Rh) | 1 |
170-5472 Seat Gp
| 10***68 | Grip-Handle | 2 |
| 10***41 | Umbrella Group; -Bg-225c | 1 |
| 11***84 | Seat Group | 1 |
103-7332 Seat Gp
| 10***17 | Post As-Seat | 1 |
| 10***32 | Seat Group | 1 |
| 11***84 | Seat Group | 1 |
138-7139 Steering Column Gp
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 08***11 | Ring | 2 |
| 10***12 | Bracket As-Motor | 1 |
108-4135 Steering Column Gp
| 07***65 | Nut, 13/16 | 1 |
| 08***11 | Ring | 2 |
| 10***35 | Steering Column Group | 1 |
187-6649 Umbrella Gp
| 18***49 | Umbrella Group; -Ap-650b | 1 |
106-8541 Umbrella Gp
| 10***41 | Umbrella Group; -Bg-225c | 1 |
Power Train
128-2482 Filter Gp-Oil
| 07***92 | Filter-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 12***82 | Filter Group-Oil; -Propel | 1 |
105-6639 Final Drive Gp
| 10***39 | Final Drive Group | 1 |
| 10***83 | Planetary Group-Final Drive | 2 |
| 10***84 | Sprocket-Track | 2 |
104-7455 Lines Gp-Propel
| 03***92 | Seal; (126.59mm Id) | 1 |
| 08***56 | Nut | 2 |
| 0T***68 | Bolt,Machine; Tube Mounting And Tube To Junction Block Uoc:Bsv,Bsx | 20 |
105-8883 Planetary Gp-Final Drive
| 03***28 | Seal-O-Ring | 5 |
| 07***90 | Ring-Retaining | 1 |
| 10***83 | Planetary Group-Final Drive | 1 |
109-3655 Valve Gp-Solenoid
| 10***18 | Coil | 1 |
| 10***55 | Valve Group-Solenoid | 1 |
| 13***99 | Valve-Solenoid; (Hydraulic Fluid) | 1 |
Service Equipment And Supplies
104-7446 Finish Ar
| 10***46 | Finish Ar | 1 |
| 11***94 | Plate & Film Group | 1 |
116-4563 Finish Ar
| 11***95 | Plate & Film Group | 1 |
| 11***63 | Finish Ar | 1 |
7r-4741 Lines Gp-Spray Down
| 08***77 | Adapter | 1 |
| 1G***70 | Extension-Curve | 1 |
| 1G***79 | Hose As | 1 |
129-9126 Parts Gp-Uptime
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 08***41 | Switch; (Machine/Engine Remote Stop) | 1 |
| 10***88 | Nozzle | 1 |
116-3295 Plate & Film Gp
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 08***67 | Film-Warning; (No Step)(No Step) | 2 |
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
239-3571 Plate & Film Gp -French
| 15***38 | Plate-Warning; (Operating Instructions) | 1 |
| 15***49 | Film-Identification | 1 |
| 15***59 | Film; (Conveyor Control Module) | 1 |
239-3572 Plate & Film Gp -English
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
| 08***52 | Decal-Caution, Hopper Support | 2 |
| 11***96 | Plate-Warning; (Operating Instructions) | 1 |
239-3573 Plate & Film Gp -English
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
| 08***52 | Decal-Caution, Hopper Support | 2 |
| 11***96 | Plate-Warning; (Operating Instructions) | 1 |
116-3294 Plate & Film Gp
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 08***67 | Film-Warning; (No Step)(No Step) | 2 |
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
115-5852 Plate & Film Gp -Engine Information
| 11***52 | Plate & Film Group; -Engine Information | 1 |
239-3570 Plate & Film Gp -French
| 15***38 | Plate-Warning; (Operating Instructions) | 1 |
| 15***49 | Film-Identification | 1 |
| 15***59 | Film; (Conveyor Control Module) | 1 |
087-0889 Reel Gp-Washdown Hose
| 08***89 | Reel Group-Washdown Hose | 1 |
| 17***28 | Fitting-Swivel | 1 |
| 17***29 | Seal-V-Ring | 1 |
137-0197 Reel Gp-Washdown Hose
| 03***72 | Bolt; (3/8-16-Thd) | 4 |
| 08***89 | Reel Group-Washdown Hose | 1 |
| 10***49 | Plate | 2 |
Slope And Grade Control
119-1766 Beam Gp-Transverse
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 10 |
| 08***15 | Cushion-Rubber | 2 |
| 11***66 | Beam Group-Transverse | 1 |
168-6500 Cable Gp-Control -Grade
| 10***63 | Clamp | 1 |
| 11***95 | Plug | 1 |
| 11***63 | Cable; (Coiled) | 1 |
110-2420 Cable Gp-Control
| 10***20 | Cable As-Rh | 1 |
| 10***21 | Cable As-Lh | 1 |
| 10***22 | Cable As | 2 |
108-0042 Control Gp-Grade
| 10***42 | Control Group-Grade | 1 |
| 11***93 | Bracket | 1 |
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
168-5031 Control Gp-Grade & Slope
| 14***22 | Cover | 1 |
| 14***25 | Seal-Bushing | 1 |
| 14***26 | Gasket | 1 |
123-0885 Control Gp-Grade & Slope -Premier Control System
| 11***43 | Mounting Group-Control; -Topcon Control System | 2 |
| 11***29 | Cap-Dust | 1 |
| 12***36 | Bracket-Mounting | 2 |
113-1195 Control Gp-Grade & Slope -Topcon Control System
| 10***31 | Bracket As | 1 |
| 10***37 | Bracket As | 1 |
| 10***76 | Tube-Control | 2 |
192-9234 Control Gp-Grade & Slope -Topcon Control System
| 10***63 | Clamp | 2 |
| 10***20 | Cable As-Rh | 1 |
| 10***21 | Cable As-Lh | 1 |
209-3130 Control Gp-Grade & Slope
| 11***10 | Screw-Pan Head | 8 |
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
209-3129 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***97 | Plug | 1 |
239-2367 Control Gp-Grade & Slope
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
144-7938 Control Gp-Grade & Slope -Topcon Control System
| 10***76 | Tube-Control | 2 |
| 11***20 | Cable Group-Control | 1 |
| 11***43 | Mounting Group-Control; -Topcon Control System | 2 |
109-0187 Control Gp-Grade & Slope -Premier Control System
| 10***87 | Control Group-Grade & Slope; -Premier Control System | 1 |
| 11***43 | Mounting Group-Control; -Topcon Control System | 2 |
| 12***48 | Mounting Group-Control; -Premier Control System | 1 |
194-6990 Control Gp-Grade & Slope -Premier Control System
| 11***29 | Cap-Dust | 1 |
| 12***36 | Bracket-Mounting | 2 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
190-7525 Control Gp-Grade & Slope -Topcon Control System
| 10***94 | Junction Box | 2 |
| 10***98 | Control Group-Grade & Slope | 2 |
| 10***08 | Sensor Group-Grade; (Control) | 2 |
209-3125 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***97 | Plug | 1 |
130-7053 Control Gp-Grade & Slope -Premier Control System
| 12***36 | Bracket-Mounting | 2 |
| 13***53 | Control Group-Grade & Slope; -Premier Control System | 1 |
| 16***30 | Sensor-Slope | 1 |
122-0348 Mounting Gp-Control -Premier Control System
| 12***48 | Mounting Group-Control; -Premier Control System | 1 |
| 13***84 | Plate As | 2 |
| 13***85 | Mount As | 2 |
135-3860 Mounting Gp-Control -Premier Control System
| 13***60 | Mounting Group-Control; -Premier Control System | 1 |
| 13***50 | Mount As | 2 |
| 18***61 | Bracket | 1 |
112-4043 Mounting Gp-Control -Topcon Control System
| 11***43 | Mounting Group-Control; -Topcon Control System | 1 |
| 13***89 | Support As; (Sensor) | 1 |
| 25***04 | Spacer | 4 |
185-4061 Sensor Ar-Grade -Premier Control System
| 11***93 | Bracket | 1 |
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 18***44 | Jack Group-Height Adjuster | 1 |
209-3132 Sensor Gp-Grade -Averaging Ski
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
122-0090 Sensor Gp-Grade -Averaging Ski
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 12***99 | Arm-Follower | 1 |
122-0094 Sensor Gp-Grade
| 11***29 | Cap-Dust | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
209-3131 Sensor Gp-Grade -Sonic
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
Undercarriage
114-1888 Bogie Gp-Center
| 00***31 | Cup-Bearing | 4 |
| 00***32 | Cone-Bearing | 2 |
| 10***58 | Shim; (1.5-mm Thk) | 4 |
114-1887 Bogie Gp-Front
| 00***31 | Cup-Bearing | 4 |
| 00***32 | Cone-Bearing | 2 |
| 10***58 | Shim; (1.5-mm Thk) | 4 |
105-6640 Bogie Gp-Rear
| 10***40 | Bogie Group-Rear | 1 |
| 10***56 | Bearing-Sleeve | 2 |
| 10***50 | Frame As-Bogie | 1 |
114-5539 Idler Gp-Front
| 00***31 | Cup-Bearing | 2 |
| 00***32 | Cone-Bearing | 1 |
| 10***91 | Pin | 2 |
222-3058 Link As-Track
| 11***22 | Bushing-Track | 50 |
| 22***58 | Link As-Track | 1 |
| 25***02 | Seal As | 100 |
9n-4329 Link As-Track
| 5A***87 | Bolt-Track-( 9/16 X 18 X 3.0 In) | 4 |
| 6B***78 | Pin-Track Link | 50 |
| 6S***46 | Seal (Washer) | 200 |
239-2366 Mounting Gp-Averaging Ski
| 23***66 | Mounting Group-Averaging Ski | 1 |
| 28***75 | Collar | 4 |
| 28***77 | Tube | 2 |
231-3079 Roller Gp-Track -Single Flange
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 21***57 | Seal Group-Duo-Cone | 2 |
| 23***79 | Roller Group-Track; -Single Flange | 1 |
3t-4352 Roller Gp-Track
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 4 |
| 3N***95 | Ring (For Extreme Temperatures) | 2 |
6s-3609 Roller Gp-Track Carrier
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 5 |
| 17***60 | Roller As | 1 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
105-6643 Roller Gp-Track Carrier
| 10***43 | Roller Group-Track Carrier | 1 |
| 6S***09 | Roller Group-Track Carrier; Track Carrier Roller Group | 2 |
| 7X***51 | Bolt-Plt; (5/8unc X 3 3/4) | 2 |
105-6644 Track Gp
| 10***44 | Track Group | 1 |
| 13***98 | Pad As-Track | 50 |
| 13***90 | Plate-Backing | 49 |
104-7443 Undercarriage Ar
AP-1050B serial number reference
The PIN/serial plate on the AP-1050B is mounted on the machine frame, typically near the operator's platform or console. If not visible there, check the frame rail near the engine compartment. Read the first three characters as the prefix, which identifies the model and manufacturing plant, followed by a sequential unit number; e.g. 6ZN00001 is the first unit built in that prefix run.
| Prefix | Identifies | Notes |
|---|---|---|
| 6ZN | AP-1050B asphalt paver, base production run | Powered by the Cat 3116 diesel engine. This is the sole confirmed machine prefix for the AP-1050B itself. The same parts/service literature also covers the rebadged Barber-Greene BG-245C under a separate 4XN prefix; that prefix is not an AP-1050B code and should not be mixed into AP-1050B records. Production ran roughly from the mid-1990s into the early 2000s. |
Frequently asked questions
What engine does the Caterpillar AP-1050B use?
The AP-1050B is powered by a Cat 3116TA turbocharged diesel, a 6.6-liter inline six-cylinder rated at roughly 158 net hp (117 kW) per SAE J1349/ISO 9249. It is a mechanically governed engine, not an electronically controlled ACERT unit.
What is the operating weight of the Caterpillar AP-1050B?
Operating weight runs from about 17.7 to 19.6 tonnes (39,100 to 43,140 lb), varying with the screed fitted — lighter with a Pavemaster 10B, heavier with an AS2301 or Extend-A-Mat 10-20B screed.
What replaced the Caterpillar AP-1050B?
Cat's B-series track paver line continued with the AP-1055B and then the ACERT-powered AP-1055D, which switched to a C7 engine and electronic controls. Later E/F-series AP1055 pavers followed, some offering a Mobil-Trac rubber-belt undercarriage option — a feature the AP-1050B itself never had, since it ran steel D3 track rails throughout its production run.
What AP-1050B owners discuss
What engine is actually in the AP-1050B, and what quirks come with it?
The AP-1050B is built around the Cat 3116 diesel, a turbocharged inline-six with mechanically actuated, electronically controlled unit injectors (not the HEUI injection used on the later 3126/C7-powered AP-1055 series, so don't cross-apply HEUI troubleshooting to this machine). Owners report the injector supply lines and sealing O-rings on this generation weep after years of heat-cycling next to the engine deck, and a persistent diesel smell around the hood more often traces back to a line fitting than to the injectors themselves. The mechanical injectors are also unforgiving of dirty or wet fuel — contamination shows up as hard starting and lost pop pressure well before the engine throws a fault. Have your dealer verify injector pop pressure and timing if cold-start smoke changes color or cranking gets noticeably harder.
What undercarriage wear pattern shows up most on the AP-1050B's steel track?
The AP-1050B rides on steel crawler track set on Cat D3 dozer rails, not a rubber belt system, and the wear pattern owners see most is packed, cooled asphalt mix building up in the bogie and roller frame rather than track stretch on its own. Field reports say track pads and bogie rollers that ride unevenly more often trace back to hardened mix jammed in the roller path than to a genuinely worn chain. Clearing hardened mix out of the roller frame regularly is the single biggest thing owners credit with extending bogie and idler life on this platform — running it dirty is what actually eats the undercarriage. Have your dealer verify track tension and bogie wear limits if rough running continues after a thorough cleanout.
Why does the propel system seem to creep or drift when the machine is parked on grade?
Operators describe slow forward or backward creep on a stopped paver as a classic hydraulic drift symptom — oil bypassing internally across a control valve spool or a worn cylinder/motor seal, not an engine or transmission fault. On these older mechanical-injection pavers the propel circuit doesn't have the electronic load-check redundancy of newer models, so a marginal valve or seal can go unnoticed until the machine is left on a slope. Chock the tracks whenever parking on any grade regardless of how tight the propel feels. Have your dealer verify the propel valve and drive motor seals if creep shows up consistently, since diagnosing whether the leak is in the valve or the motor needs a bypass or isolation test.
The screed heater is inconsistent or won't hold temperature — what's the usual cause on a machine this age?
Diesel-fired screed heaters on machines of this vintage take a beating from constant heat-cool cycling, and owners report the heater box itself is often the first thing to go — sheet metal fatigues, scorches, and eventually rots through around the burner housing before the burner components fail. When heat is uneven across the plate, check glow plugs, the burner fan, and the heating element wiring harness for heat-damaged insulation before assuming the burner assembly is bad. A tripped heater circuit breaker is also a common false alarm for the heater being dead — it's worth resetting and watching before pulling anything apart. Have your dealer verify heater box integrity and burner combustion if the screed still won't hold an even mat temperature after electrical checks come back clean.
What electrical or sensor issues come up most with the grade and slope controls?
Sonic (ultrasonic) grade sensors and the slope pendulum on the screed cross-beam are the parts operators flag most for erratic behavior, and it's usually alignment or environment, not a failed sensor. A sonic sensor that isn't held perpendicular to the reference surface gives an inconsistent or on-off signal that shows up as mat texture problems long before any fault is logged. Wiring harnesses routed near the screed and engine bay are also prone to insulation damage from heat and asphalt fume exposure over the years, which causes intermittent sensor dropout that can look like a bad sensor when it's really a chafed wire. Reseat and re-aim sensors and inspect harness runs for heat damage before condemning a sensor. Have your dealer verify sensor calibration and harness continuity if erratic grade or slope readings continue after a visual check.
What wears out fastest in the feeder system (augers and conveyor chains)?
The feeder system takes the brunt of the abuse on any paver of this size — floor plates thin out and warp, auger flights wear to a point, and conveyor chains stretch and start to sag over time. Bearing seals on the auger and conveyor shafts are a known weak point once they start letting hot mix into the bearing itself; once that happens the bearing (and often the surrounding housing) needs replacement rather than a reseal. Under typical mix volumes and abrasiveness, expect several paving seasons of life from an auger before flights need attention, with lubrication of pivot points, chains, and bearings being the main lever owners have over that lifespan. Rough or jerky chain movement and abnormal feeder noise are the early warning signs worth chasing before a chain jams in the sprocket box.
What should I check before buying a used AP-1050B?
Measure the screed plate thickness at all four corners, front and rear — it's the fastest-wearing part on the machine, and if the readings don't match side to side, the paver has been running out of alignment. Look at the hopper wings: straight and clean suggests a well-run machine, bent and stripped of paint suggests the opposite. Walk the undercarriage and check the steel track chain, bogie rollers, and idlers for the packed-debris wear pattern common to this platform, since undercarriage replacement is a major cost driver on a used unit. Pull the engine oil dipstick — clean oil is a good sign, and any coolant sheen on the dipstick points to a head gasket problem on the 3116 that should be priced into the deal. Check the auger, conveyor chain, and floor plates for the wear signs above, and confirm the screed heater, grade sensors, and propel system all function correctly during a live demo rather than just idling in the yard. Have your dealer verify engine compression and hydraulic system condition before finalizing purchase, since a rough walk-around inspection won't catch everything a shop pressure test will.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific AP-1050B part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.