Caterpillarasphalt paver
Caterpillar AP-1000D
Maintenance schedule, common problems & OEM parts breakdown
The Cat AP-1000D is a wheel-type highway-class asphalt paver built around a hydrostatically driven wheeled tractor rather than a tracked undercarriage. Across its production run it was powered by the Cat C7 ACERT turbocharged inline six-cylinder diesel, Tier III certified, 7.24 L displacement, rated near 167 kW (224 hp) gross. Base tractor weight runs about 14,741 kg (32,470 lb), and operating weight with a screed installed lands roughly in the 17,830-18,940 kg (39,320-41,755 lb) range depending on screed and options fitted. It followed the earlier base AP-1000 and shared its generation window with the wider-body AP-1000E and folding-screed AP-1000F, plus the larger Mobil-trac tracked AP-1055D as a heavier sibling. Cat offered it factory-fitted with SE47, SE50, or SE60 vibratory screeds for paving widths of 2.44 to 3.05 m (8-10 ft), riding on a 2.56 m (8.4 ft) wheelbase with a 446 L (117.8 gal) fuel tank. It carries the EAD serial prefix and was eventually superseded by the Tier IV AP1000, which dropped the D suffix.
Within the D-series, Cat's changes centered on emissions compliance and screed options rather than a ground-up redesign; the wheel tractor, hydrostatic drive, and hopper/auger/conveyor material path stayed consistent through the run. The bigger split sits at the model-number boundary: AP-1000D machines run the EAD prefix and C7 ACERT engine, while the later Tier IV refresh switched to the smaller C3.3B engine with SE60 FM screeds and paver-assist automation not present on the D-series. That makes serial-prefix verification important when sourcing parts or buying used, since AP-1000D, AP-1000E, and AP-1000F share a numbering family but differ in screed hardware and prefix. In the used and parts market today, the AP-1000D remains a common trade-in machine from contractors that bought Tier III equipment ahead of the Tier IV transition. Its C7 ACERT parts commonality with other Cat C7-powered machines keeps engine and filtration parts easy to source, while screed wear parts and hydrostatic drive components are the main recurring buys for owners keeping these units working well past 6,000 hours.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar AP-1000D specifications
Engine
| Engine model | Cat C7 with ACERT Technology, turbocharged 6-cylinder diesel |
| Gross power | 167 kW (224 hp) at 2200 rpm (SAE J1995) |
| Net power | 166 kW (223 hp) per ISO 9249 / EEC 80/1269; 165 kW (221 hp) per SAE J1349 |
| Displacement | 7.24 L (441.7 cu in) |
| Bore x stroke | 110 mm x 127 mm (4.33 in x 5.0 in) |
| Emissions tier | U.S. EPA Tier 3 / EU Stage IIIa |
Weights
| Tractor weight (base unit, incl. generator and auxiliary power panel) | 14,741 kg (32,470 lb) |
| Operating weight (with standard screed) | approx. 17,830 kg (39,320 lb); some spec aggregators list up to 18,940 kg (41,755 lb) for a fully equipped configuration - varies by screed and options |
| Ground pressure | not published for this rubber-tired wheel paver |
Dimensions
| Wheelbase | 2.56 m (8.4 ft) |
| Transport length (over screed, standard configuration) | 6.81 m (22 ft 4 in) |
| Transport width (standard screed, hopper raised) | 3.33 m (10 ft 11 in) |
| Transport height | 3.38 m (11 ft 1 in) |
Performance
| Maximum travel speed | 22.0 km/h (13.7 mph) |
| Maximum paving speed | 91 m/min (approx. 300 ft/min) |
| Paving width | standard 3.05 m (10 ft); down to 2.44 m (8 ft) minimum, extendable with screed options |
| Hopper capacity | approx. 6.1 m3 (215 ft3), roughly 12-14.5 tonnes of mix depending on material density |
| Gradeability | not published for this model |
Service capacities (summary)
| Fuel tank | 446 L (117.8 gal) |
| Hydraulic system | not documented for this exact model in available literature - verify with your dealer |
| Engine oil | not documented for this exact model in available literature - verify with your dealer |
| Cooling system | not documented for this exact model in available literature - verify with your dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
AP-1000D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) — Cat C7 turbocharged ACERT diesel | Not documented for this exact model/serial range in publicly available sources; a paver-installed C7 sump typically falls in the high-teens to low-20s liters (roughly 5-6 US gal) range but confirm against the OMM decal or dealer before service. | |
| Cooling system (machine-installed radiator circuit) | Not documented for this exact model/serial range in publicly available sources; confirm against the OMM decal or dealer before service. | Cat ELC (Extended Life Coolant), premixed 50/50 concentrate for standard protection; full-strength concentrate blend used where extended sub-zero protection is required. Follow the coolant/water ratio chart in the OMM for the ambient range worked in. |
| Fuel tank | 446 L (117.9-118 US gal) | No. 2-D diesel meeting Cat's commercial diesel fuel spec; use ultra-low-sulfur grade consistent with the engine's emissions certification. Cold-climate operation calls for a winterized blend per the OMM's fuel guidance. |
| Hydraulic system and tank (propel, screed, auger/conveyor circuits) | Not documented for this exact model/serial range in publicly available sources; confirm against the OMM decal or dealer before service. | Cat HYDO Advanced hydraulic oil. Grade is selected by ambient operating temperature per Cat's hydraulic viscosity chart — lighter multigrade for cold starts, heavier single-grade oil for sustained hot-climate operation. |
| Wheel-drive gearboxes / final drives (each) | Not documented for this exact model/serial range in publicly available sources; confirm against the OMM decal or dealer before service. | Cat TDTO (Transmission/Drive Train Oil). SAE grade is selected by ambient temperature — lighter grades (10W) for cold climates up to heavier grades (30-50) for sustained heat, per the OMM's viscosity-by-temperature table. |
| Grease (chassis, screed, and auger/conveyor pivot points) — spec only | Spec only, no reservoir volume; grease is applied per point per the OMM's lubrication interval chart. | Cat Advanced 3Moly Grease, NLGI 2 multipurpose extreme-pressure grease, for pins, bushings, and pivot points across the chassis and paving components. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar AP-1000D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the AP-1000D beyond the schedule
Predictive Maintenance & Fluid Analysis
Run oil sampling on the C7 ACERT engine and hydrostatic hydraulic system every 250 hours to catch turbocharger wear, fuel dilution, or contamination before failure. Track auger gearbox and wheel-drive final drive oil condition, since heat-soaked hydrostatic drives on wheel-type pavers run hotter than tracked machines. Watch coolant condition trending for the Tier III cooling package, and log screed vibrator bearing temperatures during paving to flag early wear before it shows up as mat texture defects.
Corrective & Common Repairs
Typical AP-1000D repairs center on the hydrostatic propel system - wheel-drive motors and pump seals wear from constant low-speed, high-torque paving cycles. Auger and conveyor drive chains stretch and need re-tensioning or replacement under abrasive mix loads. Screed extension slide rails and vibrator bearings wear from asphalt heat and vibration cycling. Fuel filters on the C7 ACERT need more frequent replacement than the base interval when running off-road diesel of variable quality.
Overhaul & Rebuild Points
Major rebuild points on the AP-1000D land on the hydrostatic wheel-drive motors, propel pumps, and auger gearboxes once hours climb well past 6,000. Screed vibrator shafts and eccentric weights wear enough by then to need bearing and shaft replacement to hold mat density. The C7 ACERT typically reaches a top-end or inframe rebuild point in that same window if oil analysis trends call for it. Hopper wing cylinders and pivot pins loosen with age and are common wear-point rebuild items.
Seasonal & Environment Servicing
Cold-start the C7 ACERT with correct-viscosity oil and confirm block heater function before overnight low temperatures; verify the screed heater/burner system before early-season paving. Purge fuel water separators more often in humid or wet storage conditions. In hot climates, watch hydrostatic drive oil temperature closely, since a wheel-type paver lacks the cooling mass of a tracked undercarriage. Before winter storage, stabilize fuel, drain water separators, and protect exposed hydraulic cylinder rods from corrosion.
AP-1000D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 119-0073 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 132-7165 | Filter Element As-Air | Air intake service | Check fitment → |
| 077-5232 | Filter Element-Breather | Hydraulic service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
| 054-1719 | Filter Element As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
AP-1000D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 030-0096-03 | Fuel Level Sensor circuit voltage above normal range | Sender circuit shorted to a power source, damaged fuel level sender, or corroded connector | Check fuel level sender wiring and connector for a short to power before replacing the sender |
| 030-0248-02 | Cat Data Link data erratic, intermittent, or incorrect | Loose or corroded data link connector, damaged harness between the paver ECM and other machine modules, or a module dropping off the link | Inspect data link harness and connector pins at each module and confirm proper link termination |
| 030-0263-03 | Digital Sensor Power Supply (8V/12V) voltage above normal range | Sensor supply circuit shorted to a higher voltage source or a failing regulator inside the ECM | Disconnect sensors fed by this supply one at a time to isolate the fault, then check supply voltage at the ECM connector |
| 030-0263-04 | Digital Sensor Power Supply (8V/12V) voltage below normal range | Shorted or overloaded sensor circuit on the shared supply, or a failing ECM regulator | Disconnect sensors fed by this supply one at a time to isolate the short, then verify supply voltage at the ECM connector |
| 030-0271-05 | Action Alarm circuit open | Failed alarm, broken wiring between the ECM and alarm, or a disconnected connector | Check alarm continuity and trace the wiring from the ECM to the alarm for an open circuit |
| 030-0271-06 | Action Alarm circuit shorted | Alarm wiring shorted to ground or to another circuit | Inspect alarm harness for chafing or pinched wiring and check for a short to ground |
| 030-0324-05 | Warning Lamp (Action) circuit open | Burned-out lamp or LED, broken wiring, or a loose connector | Check the warning lamp and trace the circuit from the ECM to the lamp for continuity |
| 030-0600-04 | Hydraulic Oil Temperature Sensor circuit voltage below normal range | Sensor circuit shorted to ground, failed sensor, or damaged wiring | Check sensor wiring for a short to ground and test sensor resistance against spec, replacing the sensor if out of range |
| 030-0650-11 | Harness Code not recognized by the ECM | Incorrect harness installed for this paver configuration, damaged or missing harness code resistor, or an ECM/harness mismatch after a component swap | Confirm the correct harness is fitted for this machine configuration and check the harness code resistor circuit |
| 030-0819-02 | Keypad Data Link data erratic or not received | Loose keypad connector, damaged keypad data link wiring, or a failing keypad module | Reseat and inspect the keypad connector and trace the keypad data link wiring for damage |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
AP-1000D attachments & work tools
Vibratory screeds (SE47/SE50/SE60 series)
The AP-1000D pairs with bolt-on vibratory screeds in the SE47, SE50, and SE60 V/VT family. Base screed widths run 2.44-3.05 m (8-10 ft), with standard paving ranges roughly 2.55-6 m depending on screed and up to about 7.45 m (24.5 ft) on the widest SE60 configuration; extra-wide XW variants push past 9-10 m but availability varies by screed generation.
Screed extensions (front-mount and rear-mount)
Front-mount or rear-mount hydraulic power extensions bolt to the screed mainframe to widen the paving pass. Heavy-duty 2.5 m and 3.0 m screed frames accept bolt-on extension sections for extra-wide work; extension reach and hydraulic-power-extend availability vary by screed model chosen.
SDX screed plate system
Interchangeable screed plate sets are offered in Textured or Smooth SDX design; both are quick-change, long-wear plates. Plates are electrically heated, with a roughly 15-minute heat-up cycle to bring the screed to paving temperature.
Hopper and material-handling package
Hopper wings fold for transport and truck exchanges; front hopper flashing and rear wing scrapers reduce material spill and leakage around the engine compartment during truck-to-hopper transfers. A truck hitch option is available for push-paving setups.
Auger system and extensions
Bolt-on auger extensions widen material distribution to match the fitted screed width. An auger-chamber ventilation option draws fumes away from the operator's station for paving in enclosed or low-clearance areas.
Conveyor delivery system
Twin slat conveyors feed material from hopper to auger; replaceable conveyor bed plates and chain guards are offered as lower-cost wear items to reduce downtime on high-tonnage jobs.
Grade and slope control sensors
The paver accepts non-contacting sonic (averaging) sensors and mechanical sensor skis for automatic grade control, plus auto slope control for the screed. These are typically integrated third-party grade-control components mounted to the tow-arm and screed rather than Cat-branded work tools.
Undercarriage configuration
AP-1000D is the wheel-type variant of this paver class; a Mobil-trac (rubber track) version was offered in the same size class under a related model designation for low ground-pressure or soft-subgrade paving. Confirm which undercarriage a specific unit carries before ordering matched components.
All AP-1000D assemblies by section
Every catalogued assembly group for the Caterpillar AP-1000D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
233-2784 Aftercooler Gp -Air
| 23***82 | Sleeve-Rubber | 4 |
| 23***84 | Aftercooler Group; -Air | 1 |
183-8087 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
231-8007 Air Cleaner Gp
| 18***87 | Air Cleaner Group | 1 |
| 1P***86 | Adapter | 1 |
| 1S***37 | Cap As-Air Cleaner | 1 |
310-9669 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
294-7675 Cover Gp-Air Inlet -Starting Aid Heater
| 24***95 | Insulator; (Air Inlet Heater) | 1 |
| 29***75 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
189-8780 Cover Gp-Air Inlet -Includes Heater
| 18***80 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 28***73 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
288-0973 Cover Gp-Air Inlet -Starting Aid Heater
| 24***95 | Insulator; (Air Inlet Heater) | 1 |
| 28***73 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
222-7970 Elbow Gp-Air Inlet
| 15***09 | Elbow; (Air Inlet) | 1 |
| 1U***46 | Sealant (For Locations A) | 1 |
| 22***70 | Elbow Group-Air Inlet | 1 |
231-8008 Exhaust Gp-Flexible
| 06***93 | Clamp-Tubing | 1 |
| 1W***31 | Clamp-Band; -Turbo Exhaust-Exhaust | 1 |
| 23***08 | Exhaust Group-Flexible | 1 |
219-5840 Manifold Gp-Exhaust
| 21***64 | Manifold-Exhaust; (End) | 2 |
| 21***40 | Manifold Group-Exhaust | 1 |
| 21***55 | Manifold-Exhaust; (Center) | 1 |
200-4508 Manifold Gp-Exhaust
| 17***98 | Bolt-Flange Head; (M10x1.5-Thd) | 12 |
| 18***72 | Spacer; (11x16x35-mm Thk) | 12 |
| 20***08 | Manifold Group-Exhaust; (Exhaust) | 1 |
151-0864 Plug Gp-Air Inlet Manifold
| 15***64 | Plug Group-Air Inlet Manifold | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 9S***05 | Plug-O-Ring; (Straight Thread O-Ring) | 1 |
231-8010 Shield Gp-Manifold
| 23***10 | Shield Group-Manifold | 1 |
| 24***73 | Insulation | 1 |
| 5P***25 | Lockwire; (110 Dm-Sold By The Meter) | 0 |
197-4998 Turbocharger Gp -Basic
| 13***24 | Plate-Clamp; (Turbine)(Turbine) | 2 |
| 15***72 | Clamp As; (Compressor) | 1 |
| 16***63 | Clamp | 2 |
281-4202 Turbocharger Gp
| 25***99 | Turbocharger Group | 1 |
| 25***24 | Sleeve; (46-cm) | 0 |
| 28***02 | Turbocharger Group | 1 |
250-7699 Turbocharger Gp
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 15***72 | Clamp As; (Compressor) | 1 |
| 16***63 | Clamp | 2 |
201-9635 Turbocharger Gp
| 20***35 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
| 7C***31 | Gasket-Turbocharger | 1 |
Basic Engine
110-0361 Belt Tensioner Gp
| 11***61 | Belt Tensioner Group | 1 |
| 13***42 | Belt Tightener; (Auxiliary Drive) | 1 |
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 1 |
212-4289 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 21***88 | Camshaft As | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
222-5947 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 3 |
| 17***67 | Spacer; (8.8x16x10-mm Thk)(Marked X) | 8 |
| 1U***46 | Sealant (For Locations A) | 0 |
118-1727 Cover Gp-Front Housing -Accessory Drive
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 4W***26 | Cover | 1 |
172-8732 Cover Gp-Front Housing
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 17***32 | Cover Group-Front Housing | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
211-9120 Cover Gp-Front Housing
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
| 13***22 | Stud | 2 |
| 16***76 | Cover As-Front | 1 |
261-3722 Cover Gp-Valve Mechanism
| 09***49 | Bolt; (M8x1.25x40-mm) | 13 |
| 22***31 | Cap As-Filler; (Engine Oil) | 1 |
| 26***22 | Cover Group-Valve Mechanism | 1 |
210-5590 Crankshaft Gp
| 10***08 | Bearing-Main; (Standard) | 6 |
| 14***62 | Bearing; (0.25mm Undersize) | 0 |
| 14***64 | Bearing; (0.5mm Undersize) | 0 |
221-4482 Cylinder Block Gp
| 1W***07 | Sleeve | 2 |
| 22***82 | Cylinder Block Group | 1 |
| 30***41 | Cylinder Block Group | 1 |
305-8141 Cylinder Block Gp
| 10***04 | Sleeve-Cylinder | 0 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
| 26***74 | Cylinder Block Group | 1 |
263-3774 Cylinder Block Gp
| 26***74 | Cylinder Block Group | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 14 |
| 7E***68 | Cap-Crankshaft Bearing | 7 |
314-4184 Cylinder Head As
| 22***00 | Sleeve-Injector | 6 |
| 23***85 | Insert-Valve Seat; (Standard)(Exhaust) | 6 |
| 26***57 | Insert-Valve Seat; (Standard)(Inlet) | 12 |
219-5849 Cylinder Head Gp
| 13***95 | Gasket-Cylinder Head | 1 |
| 13***52 | Bolt-12 Point Head; (M20x2.5x170mm) | 1 |
| 14***89 | Fastener Group-Cylinder Head | 14 |
300-9550 Cylinder Head Gp
| 13***83 | Retainer-Spring | 6 |
| 13***15 | Seat-Valve Spring | 6 |
| 13***18 | Spring-Valve; (Exhaust) | 6 |
219-5847 Cylinder Head Gp
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 21***47 | Cylinder Head Group | 1 |
241-4101 Damper Gp
| 16***21 | Damper Assem. | 1 |
| 22***21 | Spacer; (101.5x167x8-mm Thk) | 1 |
| 24***01 | Damper Group | 1 |
246-1571 Drain Gp-Engine Oil
| 16***35 | Plug As | 1 |
| 20***28 | Hose As | 1 |
| 24***71 | Drain Group-Engine Oil | 1 |
231-8006 Drive & Mtg Gp-Pump
| 09***19 | Plug-Pipe | 1 |
| 14***12 | Adapter As | 2 |
| 14***81 | Elbow Group | 1 |
267-6486 Drive Gp-Accessory -Hydraulic Fan Pump
| 13***19 | Seal-Integral; (Integral) | 1 |
| 26***86 | Drive Group-Accessory; -Hydraulic Fan Pump | 1 |
| 3E***68 | Seal-Lip Type | 1 |
258-8723 Fastener Gp-Cylinder Head
| 22***44 | Clip | 3 |
| 24***00 | Spring | 11 |
| 25***23 | Fastener Group-Cylinder Head; -Valve Cover Base | 1 |
213-1630 Fastener Gp-Front Cover
| 21***30 | Fastener Group-Front Cover | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 12 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 2 |
116-4556 Fastener Gp-Front Housing
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***36 | Bolt; (M12x1.75x70-mm) | 6 |
113-6170 Fastener Gp-Lifting -Engine, Rear
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
| 8T***36 | Capscrew; (Hex Hd) (M10 X 1.50 X 25l Gr 10.9) | 3 |
273-2716 Flywheel Gp
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
| 27***16 | Flywheel Group | 1 |
186-5892 Flywheel Gp
| 18***92 | Flywheel Group | 1 |
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
205-1321 Gear Gp-Front
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
| 11***19 | Plate-Retaining | 1 |
132-2106 Housing Gp-Flywheel
| 13***06 | Housing Group-Flywheel | 1 |
| 6V***42 | Bolt (M10x1.50x40mm) | 2 |
| 7C***33 | Housing-Flywheel | 1 |
165-4446 Housing Gp-Front
| 16***46 | Housing Group-Front | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 24***59 | Housing-Front | 1 |
139-4081 Lifter Gp-Valve -Mechanism
| 13***81 | Lifter Group-Valve; -Mechanism | 1 |
| 13***84 | Spacer; (15.9x24x6-mm Thk) | 2 |
| 13***76 | Shaft As-Lifter | 1 |
153-5417 Lifting Gp-Engine
| 15***17 | Lifting Group-Engine | 1 |
| 15***96 | Plate-Lifting; (Rear) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
169-3130 Mounting Gp-Alternator
| 12***40 | Support-Alternator | 1 |
| 13***82 | Support-Alternator | 1 |
| 16***30 | Mounting Group-Alternator | 1 |
231-8005 Mounting Gp-Engine -Flexible
| 15***12 | Mount As | 2 |
| 23***05 | Mounting Group-Engine; -Flexible | 1 |
| 23***43 | Support As | 2 |
152-5013 Mounting Gp-Fan Drive
| 15***13 | Mounting Group-Fan Drive | 1 |
| 25***23 | Support As; (Fan) | 1 |
| 7E***13 | Bracket | 1 |
226-1799 Pan Gp-Oil -Engine
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 21***36 | Pan; (Oil)(Engine) | 1 |
| 22***99 | Pan Group-Oil; -Engine | 1 |
212-3652 Piston & Rod Gp
| 19***53 | Ring-Piston; (Intermediate) | 1 |
| 19***71 | Pin-Piston | 1 |
| 19***72 | Retainer-Pin | 2 |
159-0303 Plug Gp-Cylinder Block
| 15***03 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 6F***62 | Washer,Flat Transmission Oil Cooler | 1 |
162-8068 Plug Gp-Engine -Engine Oil
| 14***95 | Plug As | 1 |
| 16***68 | Plug Group-Engine; -Oil Gallery | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
121-0802 Plug Gp-Flywheel Housing
| 12***02 | Plug Group-Flywheel Housing | 1 |
| 2P***94 | Plug-Sealing | 1 |
206-2044 Pulley Gp-Crankshaft
| 20***75 | Pulley; (8-Groove) | 1 |
| 20***44 | Pulley Group-Crankshaft | 1 |
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
130-5871 Pulley Gp-Engine
| 12***37 | Support-Compressor | 1 |
| 13***71 | Pulley Group-Engine | 1 |
| 17***23 | Pulley Group-Idler; (8 Groove) | 1 |
143-4927 Pulley Gp-Fan Drive
| 11***38 | Plate; (Thrust) | 1 |
| 14***27 | Pulley Group-Fan Drive | 1 |
| 19***56 | Pulley; (8-Groove) | 1 |
175-3223 Pulley Gp-Idler
| 12***90 | Bolt; (M10x1.5) | 1 |
| 12***91 | Cover-Dust | 1 |
| 12***92 | Pulley As-Idler; (8-Groove) | 1 |
256-3831 Rocker Arm Gp -Exhaust
| 25***31 | Rocker Arm Group; -Exhaust | 1 |
| 25***32 | Rocker Arm As; (Exhaust) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
256-3834 Rocker Arm Gp -Inlet
| 25***34 | Rocker Arm Group; -Inlet | 1 |
| 25***35 | Rocker Arm As; (Inlet) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
122-8929 Seal Gp-Crankshaft
| 12***29 | Seal Group-Crankshaft | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
| 7C***71 | Seal Group-Crankshaft; (Rear)(Rear) | 1 |
232-3717 Valve Mechanism Gp
| 13***81 | Lifter Group-Valve; -Mechanism | 3 |
| 21***09 | Bridge-Valve | 6 |
| 23***54 | Clip | 1 |
256-3830 Valve Mechanism Gp
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
235-5528 Valve Mechanism Gp
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
Braking System
193-8539 Pump & Valve Gp-Brake -Manual Release
| 19***39 | Pump & Valve Group-Brake; -Manual Release | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
229-9476 Pump Gp-Hand -Manual Brake Release
| 22***76 | Pump Group-Hand; -Manual Brake Release | 1 |
| 23***43 | Knob | 1 |
| 31***34 | Kit-Seal; (Check Valve) | 1 |
Controls
8i-0257 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 2 |
| 10***04 | Bolt-Shoulder | 2 |
| 10***24 | Tube As; (Vertical) | 4 |
102-2703 Adjuster Gp-Height -Manual
| 10***03 | Adjuster Group-Height; -Manual | 1 |
| 10***47 | Gear-Worm | 1 |
| 10***50 | Guide-Bushing | 1 |
197-5296 Adjuster Gp-Height
| 10***24 | Tube As; (Vertical) | 4 |
| 10***39 | Key-Square | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 2 |
197-9844 Chain Gp-Screed
| 10***87 | Link-Connecting | 1 |
| 19***33 | Link-Offset | 1 |
| 19***44 | Chain Group-Screed | 1 |
197-5288 Crown Gp
| 10***39 | Key-Square | 1 |
| 11***50 | Sprocket; (12-Teeth) | 1 |
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 1 |
120-5898 Crown Gp-Manual
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 05***09 | Bolt-Socket Head | 4 |
| 10***87 | Link-Connecting | 1 |
276-4590 Crown Gp-Power
| 10***01 | .. Roller, Bearing | 2 |
| 10***38 | Pointer | 1 |
| 10***39 | Key-Square | 1 |
196-2503 Jack Gp-Height Adjuster
| 10***64 | Bearing-Thrust | 2 |
| 11***49 | Worm | 1 |
| 19***03 | Jack Group-Height Adjuster | 1 |
102-2699 Jack Gp-Sloper
| 10***99 | Jack Group-Sloper | 1 |
| 10***46 | Gear-Worm | 1 |
| 10***49 | Guide-Bushing | 1 |
277-2004 Motor Gp-Power Adjuster
| 07***77 | Bushing-Terminal | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***87 | Sleeve; (26-cm) | 0 |
282-7961 Shaft Gp-Drive -Non-Actuated
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 28***61 | Shaft Group-Drive; -Non-Actuated | 1 |
197-9850 Shaft Gp-Drive -Front
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***12 | Spindle As | 1 |
197-9849 Shaft Gp-Drive -Rear
| 17***69 | Kit-Bearing; (Universal Joint) | 1 |
| 19***11 | Shaft As | 1 |
| 19***45 | Spindle As | 1 |
8i-0214 Sloper Gp-Manual
| 06***93 | Lockwasher-Bearing | 2 |
| 10***99 | Jack Group-Sloper | 2 |
| 10***00 | . Axle, Rod End | 2 |
Cooling System
117-3643 Cooler Gp-Engine Oil
| 11***43 | Cooler Group-Engine Oil | 1 |
| 23***55 | Gasket | 1 |
| 26***43 | Core As-Engine Oil Cooler | 1 |
206-4228 Lines Gp-Water -Engine
| 11***23 | Regulator-Water Temperature; (97-Deg C)(Coolant) | 2 |
| 12***66 | Gasket | 1 |
| 14***95 | Plug As | 1 |
189-2232 Pump Gp-Water
| 14***95 | Plug As | 2 |
| 14***09 | Plug As-Sto | 2 |
| 16***19 | Plug As | 1 |
236-4413 Pump Gp-Water
| 11***37 | Pulley; (8-Groove) | 1 |
| 11***25 | Filter; (Water)(Pump) | 1 |
| 12***70 | Shaft Assem. | 1 |
231-8004 Radiator & Hyd Oil Cooler Gp
| 03***19 | Cap As-Radiator | 1 |
| 06***69 | Stem | 1 |
| 12***02 | Tape; (900-cm) | 0 |
233-2785 Radiator & Hyd Oil Cooler Gp
| 23***85 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 28***98 | Radiator | 1 |
| 28***99 | Cooler-Oil | 1 |
Electrical And Starting System
3e-6328 Alarm Gp -Caterpillar Monitoring System
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
200-8277 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
316-7251 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
232-1714 Alternator Gp-Charging
| 12***96 | Pulley-Alternator | 1 |
| 20***99 | Spacer | 1 |
| 20***29 | Belt-Serpentine; (Fan Drive) | 1 |
229-4951 Battery & Wiring Gp
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 09***92 | Clip | 1 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 3 |
9w-0742 Block Gp-Junction -Battery
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
| 8C***58 | Block Group-Junction; (Battery) | 1 |
328-9946 Box Gp-Control
| 27***71 | Cover; (Lh) | 1 |
| 27***72 | Cover; (Rh) | 1 |
| 27***74 | Box; (Lh) | 1 |
122-9303 Buffer Gp-Sensor -Material Height-Propel Forward, Reverse-Propel Speed Dial
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
122-9309 Buffer Gp-Sensor -5000-Hz Pwm
| 12***09 | Buffer Group-Sensor; -5000-Hz Pwm-Conveyor Speed | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
246-9345 Control & Mtg Gp-Engine Elek
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 14***92 | Stud; (M8x1.25-Thd) | 4 |
| 22***73 | Control Group-Engine Electronic | 1 |
226-7473 Control Gp-Engine Electronic
| 22***73 | Control Group-Engine Electronic | 1 |
| 26***78 | Control Group-Unprogrammed; (Engine) | 1 |
189-0077 Control Gp-Unprogrammed
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 18***77 | Control Group-Unprogrammed; -Tractor Xmsn Control | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
222-2599 Electrical Ar
| 22***99 | Electrical Ar | 1 |
| 22***51 | Battery & Wiring Group | 1 |
| 22***49 | Wiring Group-Power Train | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
351-8709 Electronics Gp-Machine
| 31***96 | Software Group-Machine | 1 |
| 35***09 | Electronics Group-Machine | 1 |
351-5791 Electronics Gp-Machine
| 35***11 | Software Group-Machine | 1 |
| 35***91 | Electronics Group-Machine | 1 |
245-6573 Electronics Gp-Machine
| 24***73 | Electronics Group-Machine | 1 |
| 35***63 | Software Group-Machine | 1 |
| 35***64 | Service Group-Machine | 1 |
245-6571 Electronics Gp-Monitor
| 24***71 | Electronics Group-Monitor | 1 |
| 28***39 | Software Group-Monitor | 1 |
| 28***40 | Service Group-Monitor | 1 |
142-8333 Fastener Gp-Ground Stud
| 14***33 | Fastener Group-Ground Stud | 1 |
| 5P***70 | Nut-Hard; (M8 X 1.25) | 1 |
| 6V***64 | Washer-Hard; (8.8x25.5x5-mm Thk) | 1 |
234-9176 Generator & Mtg Gp-Hydraulic
| 11***33 | Washer; (11x50x6-mm Thk) | 4 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
241-8414 Generator Ar
| 23***57 | Pump & Mtg Group-Generator | 1 |
| 23***58 | Valve & Mtg Group-Control; -Generator | 1 |
| 23***59 | Motor & Mtg Group-Generator | 1 |
231-1332 Generator Gp
| 23***32 | Generator Group | 1 |
318-7418 Installation Gp-Communication
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***74 | Cover-Connector; (Wire Router) | 1 |
162-3294 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
241-8232 Lighting Gp-Flood
| 24***69 | Bracket-Light | 2 |
| 24***32 | Lighting Group-Flood | 1 |
| 5D***35 | Grommet | 2 |
198-8284 Lighting Gp-Warning Beacon
| 03***14 | Screw; (10-32x1-In) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
170-7071 Motor Gp-Electric -Fuel Transfer Pump
| 09***47 | Brush As | 1 |
| 11***94 | Bell; (Rear) | 1 |
| 11***61 | Bearing | 2 |
258-6918 Mounting Gp-Sensor -Sonic Sensor
| 25***18 | Mounting Group-Sensor; -Sonic Sensor | 1 |
| 28***75 | Collar | 4 |
| 28***79 | Washer; (32.5x63.5x7.1-mm Thk) | 2 |
232-6362 Panel Gp-Power -Generator
| 19***06 | Strip-Terminal | 1 |
| 19***80 | Circuit Breaker As; (20-Ampere)(240-Volt Receptacle) | 2 |
| 19***75 | Receptacle | 2 |
306-7612 Panel Gp-Power
| 19***06 | Strip-Terminal | 1 |
| 19***80 | Circuit Breaker As; (20-Ampere)(240-Volt Receptacle) | 1 |
| 19***75 | Receptacle | 2 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 33***45 | Radio Group-Communication; -Product Link 121sr | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
198-8279 Sensor Gp-Auger
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 2 |
| 11***07 | Knob | 2 |
| 12***44 | Paddle As | 2 |
145-8519 Sensor Gp-Auger
| 11***24 | Clamp | 2 |
| 14***19 | Sensor Group-Auger | 1 |
| 16***41 | Support-Sensor | 2 |
231-1977 Sensor Gp-Engine
| 16***61 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
| 18***63 | Plug Group | 1 |
297-5355 Sensor Gp-Engine
| 16***61 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
| 18***63 | Plug Group | 1 |
330-6038 Sensor Gp-Engine
| 16***61 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
| 18***63 | Plug Group | 1 |
160-2443 Sensor Gp-Position -Rotary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
214-4863 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
| 21***63 | Sensor Group-Position; -Rotary-Tc Impeller Clutch, Lh Pedal | 1 |
266-1467 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 26***67 | Sensor Group-Position; -Brake Pedal | 1 |
219-2385 Sensor Gp-Position -Auger
| 12***50 | Receptacle As | 1 |
| 12***51 | Bushing | 1 |
| 12***52 | Clamp As-Cable | 1 |
161-8904 Sensor Gp-Position -Rear Steer
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***04 | Sensor Group-Position; -Rear Steer-Lift | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
168-3551 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***51 | Sensor Group-Position; -Steering | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
284-8876 Sensor Gp-Position
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
| 28***76 | Sensor Group-Position | 1 |
| 3B***08 | Lockwasher Handrails To Dash | 1 |
266-1484 Sensor Gp-Position -Rotary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 26***84 | Sensor Group-Position; -Rotary | 1 |
266-8650 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 26***50 | Sensor Group-Pressure; -Intake Manifold Air | 1 |
| 27***93 | Sensor Group-Pressure; (Water Jacket Outlet) | 1 |
276-9067 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 27***19 | Sensor Group-Pressure; (Engine Block Oil Inlet) | 1 |
| 27***67 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
224-4536 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***27 | Harness As-Sensor; (14-Ga Wire)(Engine Oil Temperature) | 3 |
236-6220 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 23***20 | Sensor Group-Pressure; -Injection Actuation | 1 |
303-3357 Sensor Gp-Pressure
| 29***60 | Sensor Group-Pressure | 1 |
| 30***57 | Sensor Group-Pressure; -Atmospheric, . Spring | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
197-8394 Sensor Gp-Pressure
| 16***05 | Sensor As-Pressure; (Unfiltered Engine Oil) | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
197-8393 Sensor Gp-Pressure
| 16***03 | Sensor Group-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
267-1402 Sensor Gp-Pressure -Injection Actuation
| 21***67 | Seal-O-Ring | 1 |
| 24***69 | Sensor Group-Pressure | 1 |
| 26***02 | Sensor Group-Pressure; -Injection Actuation | 1 |
210-1747 Sensor Gp-Pressure
| 16***04 | Sensor Group-Pressure; (Turbocharger Outlet) | 1 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
236-6221 Sensor Gp-Speed -Engine Timing
| 23***21 | Sensor Group-Speed; -Engine Timing | 1 |
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
197-8391 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 23***80 | Seal-O-Ring | 1 |
197-8392 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 19***92 | Sensor Group-Temperature; -Coolant, Water | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
274-7395 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
145-7028 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***28 | Sensor Group-Temperature; -Hydraulic Oil Temp | 1 |
| 15***43 | Sleeve; (2.8-Dm) | 0 |
234-5012 Sensor Gp-Temperature
| 23***12 | Sensor Group-Temperature; -Coolant, Water | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
| 6V***09 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
234-5013 Sensor Gp-Temperature
| 23***13 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
274-7396 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
| 27***96 | Sensor Group-Temperature; -Engine Coolant | 1 |
231-3949 Starting Aid Gp -Air Inlet Heater
| 11***32 | Wire As | 1 |
| 19***41 | Cover-Terminal | 2 |
| 22***77 | Switch Group-Magnetic; -Air Inlet Heater Relay | 1 |
249-9223 Starting Aid Gp -Wiring
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 13***43 | Boot; (Red)(Red) | 1 |
| 20***77 | Bolt-Flange Head; (M8x1x25-mm) | 2 |
339-7782 Starting Aid Gp-Ether
| 13***00 | Clip; (Tab) | 2 |
| 17***69 | Tube; (250 cm) | 0 |
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
339-7783 Starting Aid Gp-Ether
| 33***14 | Wiring Group-Ether Starting Aid | 1 |
| 33***82 | Starting Aid Group-Ether | 1 |
| 33***83 | Starting Aid Group-Ether | 1 |
207-1551 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***02 | Housing As | 1 |
| 19***70 | Solenoid As-Starting Motor; (24-Volt)(Starting Motor) | 1 |
132-1418 Starting Motor Gp-Electric
| 10***08 | Bolt (M10x1.5x35mm); (M10x1.5x35-mm) | 3 |
| 13***18 | Starting Motor Group-Electric | 1 |
| 13***30 | Wire As | 1 |
128-5626 Starting Motor Gp-Electric -Cold Weather
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
| 12***26 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
207-1541 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***02 | Housing As | 1 |
| 20***41 | Starting Motor Group-Electric | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
8n-0694 Switch As-Toggle
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 6T***31 | Nut-Hexagon-(15/32-32 Thd) | 2 |
| 6T***32 | Lockwasher 15.08mm(.59in.)O.D. | 1 |
172-8660 Switch Gp-Liquid Level -Hydraulic Tank
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
175-2308 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
209-5582 Switch Gp-Magnetic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 2 |
223-7577 Switch Gp-Magnetic -Air Inlet Heater
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 20***77 | Bolt-Flange Head; (M8x1x25-mm) | 2 |
167-0138 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
254-3783 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
241-8368 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
118-3534 Switch Gp-Magnetic
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
| 17***09 | Switch Group-Magnetic; -24-Volt-Start Relay | 1 |
175-2309 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***81 | Switch As-Magnetic; (Start Relay) | 1 |
258-0883 Switch Gp-Pressure -Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Pressure; -Fuel Filter, Differential-Fuel Filter | 1 |
239-1134 Valve Gp-Ether Starting
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***34 | Valve Group-Ether Starting | 1 |
191-2846 Wiring Gp-Console -Auxiliary Steering
| 19***46 | Wiring Group-Console; -Auxiliary Steering | 1 |
| 19***70 | Harness As; (Auxiliary Steering) | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 6 |
330-6022 Wiring Gp-Engine
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
198-2714 Wiring Gp-Engine
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
339-3814 Wiring Gp-Ether Starting Aid
| 17***15 | Strap; (Dual Clamp) | 4 |
| 33***23 | Harness As-Solenoid | 1 |
| 33***14 | Wiring Group-Ether Starting Aid | 1 |
249-3293 Wiring Gp-Machine -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***01 | Plate-Face | 1 |
| 11***29 | Cap-Dust | 1 |
250-4373 Wiring Gp-Machine -Rear
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***18 | Clip | 1 |
| 13***40 | Resistor As-Connection; (3-Pin) | 1 |
249-3291 Wiring Gp-Machine -Lh
| 11***01 | Plate-Face | 2 |
| 11***29 | Cap-Dust | 1 |
| 11***18 | Clip | 6 |
235-3549 Wiring Gp-Panel
| 13***89 | Clip; (Ladder) | 1 |
| 19***81 | Circuit Breaker As; (35-Ampere)(Generator) | 1 |
| 1M***43 | Grommet | 1 |
229-8249 Wiring Gp-Power Train
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
229-3118 Wiring Gp-Screed -Diesel Heat
| 19***98 | Panel Group-Electronic; -Material Height-Rh | 1 |
| 19***99 | Panel Group-Electronic; -Material Height-Lh | 1 |
| 22***18 | Wiring Group-Screed; -Diesel Heat | 1 |
229-3119 Wiring Gp-Screed -Electric Heat
| 17***65 | Plug As-Connector | 2 |
| 19***99 | Panel Group-Electronic; -Material Height-Lh | 2 |
| 22***19 | Wiring Group-Screed; -Electric Heat | 1 |
235-3547 Wiring Gp-Screed -Electric Heat
| 23***47 | Wiring Group-Screed; -Electric Heat | 1 |
| 25***92 | Circuit Breaker As; (25-Ampere)(Extender Heater, Rh) | 4 |
| 28***80 | Harness As-Screed | 1 |
Electrical System
196-1299 Panel Gp-Electronic -Material Height-Lh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
| 13***48 | Potentiometer As; (Rh Conveyor Speed Dial) | 1 |
196-1298 Panel Gp-Electronic -Material Height-Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***83 | Relay-Time Delay; (Electric Heat) | 1 |
| 12***03 | Buffer Group-Sensor; -Material Height-Propel Forward, Reverse-Propel Speed Dial | 1 |
Engine Arrangement
223-7844 Engine Ar-Complete
| 11***61 | Belt Tensioner Group | 1 |
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
223-9994 Engine Ar-Core
| 11***43 | Cooler Group-Engine Oil | 1 |
| 16***46 | Housing Group-Front | 1 |
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
222-2602 Installation Ar-Engine
| 22***02 | Installation Ar-Engine | 1 |
| 22***44 | Engine Ar-Complete | 1 |
| 23***04 | Radiator & Hydraulic Oil Cooler Group | 1 |
Feeder Drag And Auger Conveyors
106-9718 Bearing Gp-Auger
| 01***41 | Setscrew-Socket | 3 |
| 10***18 | Bearing Group-Auger | 1 |
| 3H***40 | Setscrew; (3/8-24x0.375-In) | 2 |
201-5584 Bearing Gp-Auger
| 11***94 | Bearing-Insert | 1 |
| 20***83 | Cap | 2 |
| 20***84 | Bearing Group-Auger | 1 |
116-9509 Bearing Gp-Auger
| 10***04 | Nipple-Pipe | 1 |
| 10***18 | Bearing Group-Auger | 1 |
| 11***09 | Bearing Group-Auger | 1 |
280-9922 Chain Gp-Conveyor
| 28***22 | Chain Group-Conveyor | 1 |
| 28***79 | Bar-Side | 244 |
| 28***80 | Foam Insulation; 40 X 60 X 644 mm, Bar-Side | 122 |
119-6652 Chain Gp-Conveyor
| 11***52 | Chain Group-Conveyor | 1 |
| 11***53 | Chain Group-Conveyor; -Rh | 1 |
| 13***32 | Chain Group-Conveyor; -Lh | 1 |
134-6432 Chain Gp-Conveyor -Lh
| 13***32 | Chain Group-Conveyor; -Lh | 1 |
| 8I***14 | Bar-Side | 61 |
| 8I***15 | Bar-Side | 31 |
119-6653 Chain Gp-Conveyor -Rh
| 11***53 | Chain Group-Conveyor; -Rh | 1 |
| 8I***14 | Bar-Side | 61 |
| 8I***15 | Bar-Side | 31 |
224-5776 Conveyor & Mtg Gp-Auger
| 09***69 | Bolt | 4 |
| 10***55 | Plate | 1 |
| 11***15 | Step As | 1 |
222-2600 Conveyor Ar-Drag & Auger
| 10***77 | Footshaft Group | 2 |
| 11***46 | Conveyor Group-Drag | 2 |
| 22***00 | Conveyor Ar-Drag & Auger | 1 |
230-5481 Conveyor Gp-Auger
| 10***85 | Plate | 2 |
| 10***91 | Pipe | 2 |
| 10***96 | Plate | 1 |
115-8346 Conveyor Gp-Drag
| 05***20 | Pin-Spring | 60 |
| 11***46 | Conveyor Group-Drag | 1 |
| 12***59 | Bar-Feeder; (Conveyor) | 30 |
243-1149 Door Gp-Access
| 10***56 | Rod; (Prop) | 1 |
| 11***77 | Bumper-Rubber | 12 |
| 14***03 | Screw-Button Head; (M10x1.5x30-mm) | 24 |
228-6808 Drive Gp-Conveyor
| 10***99 | Sprocket As; (12-Teeth) | 2 |
| 13***92 | Key-Square | 2 |
| 15***91 | Bolt-Hex Head; (M24x3x120mm) | 2 |
243-0329 Extension Gp-Auger -18-In
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 23***32 | Extension Group-Auger; -6-In | 1 |
231-2043 Extension Gp-Auger -24-In, Lh
| 23***43 | Extension Group-Auger; -24-In, Lh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
198-8287 Extension Gp-Auger -12-In, Rh
| 19***87 | Extension Group-Auger; -12-In, Rh | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
199-4206 Extension Gp-Auger -12-In, Lh
| 19***06 | Extension Group-Auger; -12-In, Lh | 1 |
| 31***19 | Tube | 1 |
| 31***21 | Shaft | 1 |
231-2042 Extension Gp-Auger -24-In, Rh
| 23***42 | Extension Group-Auger; -24-In, Rh | 1 |
| 31***20 | Tube | 1 |
| 31***21 | Shaft | 1 |
231-3532 Extension Gp-Auger -6-In
| 23***32 | Extension Group-Auger; -6-In | 1 |
| 31***84 | Tube | 2 |
| 31***60 | Bolt; (M12x1.75x130-mm) | 2 |
104-7477 Footshaft Gp
| 00***54 | Cup-Roller Bearing | 4 |
| 06***92 | Washer | 2 |
| 10***35 | Cone As-Bearing | 4 |
228-6807 Guard Gp-Conveyor
| 12***30 | Plate | 2 |
| 12***54 | Screw-Flat Head; (M12x1.75x35-mm) | 64 |
| 19***32 | Guard As | 4 |
241-3280 Hydraulic Ar-Conveyor
| 23***95 | Pump & Mtg Group-Conveyor | 1 |
| 23***96 | Motor & Mtg Group-Conveyor | 1 |
| 23***97 | Motor & Mtg Group-Auger | 1 |
230-9596 Motor & Mtg Gp-Conveyor
| 11***80 | Elbow | 1 |
| 14***72 | Elbow Group | 4 |
| 14***09 | Plug As-Sto | 2 |
341-9466 Planetary Gp-Auger -Conveyor
| 09***92 | Pin-Spring | 2 |
| 13***16 | Kit-Washer; (Planetary) | 1 |
| 13***30 | Plug-Magnetic; (Planetary) | 1 |
341-9467 Planetary Gp-Conveyor -Drag
| 09***92 | Pin-Spring | 2 |
| 23***88 | Pin-Spring | 2 |
| 24***79 | Plug-Magnetic; (Planetary) | 1 |
192-7962 Planetary Gp-Conveyor
| 09***92 | Pin-Spring | 2 |
| 13***63 | Bearing | 1 |
| 16***54 | Seal | 1 |
272-7275 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 15***84 | Cone | 2 |
| 15***85 | Cup | 2 |
190-6345 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 15***84 | Cone | 2 |
| 15***85 | Cup | 2 |
351-4455 Pump & Mtg Gp-Conveyor
| 14***15 | Connector As | 2 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
230-9595 Pump & Mtg Gp-Conveyor
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 14***15 | Connector As | 1 |
| 14***39 | Connector As. | 5 |
228-6806 Shaft Gp-Feeder Drive
| 03***10 | Setscrew-Socket; (1/2-13x1.25-In) | 4 |
| 10***30 | Bearing-Flange | 2 |
| 10***70 | Key-Square | 2 |
Frame And Body
225-2317 Arm Gp-Drop
| 11***99 | Pin As-Pivot | 2 |
| 13***20 | Shaft | 2 |
| 13***77 | Lockout | 2 |
253-1002 Arm Gp-Drop
| 10***68 | Nipple-Pipe | 2 |
| 11***99 | Pin As-Pivot | 2 |
| 25***02 | Arm Group-Drop | 1 |
241-4248 Arm Gp-Tow
| 00***39 | Bearing-Aligning; (Self Aligning) | 4 |
| 19***19 | Roller | 4 |
| 19***20 | Shaft | 2 |
106-9689 Brace Gp
| 10***89 | Brace Group | 1 |
| 10***62 | Tube As-Brace | 1 |
| 10***64 | Tube As-Brace | 1 |
315-1101 Brace Gp
| 1A***68 | Nut | 1 |
| 31***01 | Brace Group | 1 |
| 31***02 | Plate As | 1 |
232-1107 Bracket Gp-Support
| 22***51 | Bracket | 1 |
| 23***07 | Bracket Group-Support | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
239-5628 Carriage Gp-Extender
| 18***25 | Scraper; (Brass) | 4 |
| 19***57 | Scraper As | 4 |
| 1A***68 | Nut | 6 |
243-0992 Cover Gp-Access
| 20***04 | Plate | 2 |
| 23***62 | Plate | 2 |
| 24***84 | Plate | 1 |
197-5297 Deflector Gp
| 16***24 | Rod-Threaded | 4 |
| 16***25 | Rod-Threaded | 4 |
| 16***26 | Turnbuckle | 4 |
8i-0292 Deflector Gp
| 10***31 | Nut-Spring | 8 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 8 |
| 16***59 | Plate As; (Lh) | 1 |
215-7553 Extension Gp-Main Frame
| 20***86 | Pin | 4 |
| 21***50 | Bracket As; (Lh) | 1 |
| 21***51 | Bracket As; (Rh) | 1 |
231-1982 Extension Gp-Main Frame -12-In
| 10***88 | Extension As | 1 |
| 23***82 | Extension Group-Main Frame; -12-In | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
241-9358 Extension Gp-Main Frame
| 12***73 | Extension As | 2 |
| 12***79 | Bar | 2 |
| 12***20 | Shim; (1.65-mm Thk) | 4 |
231-1983 Extension Gp-Main Frame -24-In
| 10***90 | Extension As | 1 |
| 23***83 | Extension Group-Main Frame; -24-In | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 3 |
222-2613 Frame Gp-Main
| 22***13 | Frame Group-Main | 1 |
| 22***14 | Frame As | 1 |
| 22***68 | Frame As | 1 |
286-9444 Frame Gp-Screed
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
197-5287 Frame Gp-Screed
| 10***68 | Grip-Handle | 2 |
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 6 |
| 16***62 | Cover-Inspection | 2 |
120-5905 Frame Gp-Screed
| 10***31 | Nut-Spring | 6 |
| 10***83 | Screw-Flat Head; (1/2-13x1-In) | 10 |
| 11***50 | Clamp As; (Bar) | 2 |
145-9438 Gate Gp-End
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***68 | Grip-Handle | 2 |
| 10***70 | Support As | 2 |
216-6989 Gate Gp-End
| 10***68 | Grip-Handle | 2 |
| 10***35 | Support As | 2 |
| 10***09 | Chain; (14-In Each) | 0 |
273-9969 Guide Gp-Steering
| 19***54 | Chain | 1 |
| 27***69 | Guide Group-Steering | 1 |
| 27***65 | Bar | 1 |
199-4196 Guide Gp-Steering
| 03***74 | Keeper | 1 |
| 10***39 | Tube As | 1 |
| 10***78 | Block | 1 |
230-5042 Hopper Gp
| 10***42 | Spacer; (13.8x23.75x12.7-mm Thk) | 2 |
| 10***23 | Round | 2 |
| 12***35 | Flashing | 2 |
252-5007 Lines Gp-Grease
| 14***20 | Connector As | 2 |
| 14***85 | Elbow; (45°) | 8 |
| 14***89 | Elbow As | 6 |
253-7898 Lock Gp-Transport
| 16***89 | Bolt-Hex Head; (M16x2x55mm) | 2 |
| 25***97 | Bar | 2 |
| 25***98 | Lock Group-Transport | 1 |
245-9080 Plate Gp-Screed -Electric Heat, 24-In
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 2 |
245-9079 Plate Gp-Screed -Electric Heat, 12-In
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 1 |
245-9078 Plate Gp-Screed -Electric Heat, 28-In
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 2 |
245-9077 Plate Gp-Screed -Electric Heat, 12-In
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
| 13***89 | Clip; (Ladder) | 1 |
231-1956 Support Gp-Frame
| 10***89 | Brace Group | 1 |
| 23***56 | Support Group-Frame | 1 |
| 23***07 | Bracket Group-Support | 1 |
243-2052 Suppression Gp-Sound
| 20***48 | Panel-Foam | 1 |
| 23***90 | Foam | 1 |
| 23***91 | Foam | 1 |
241-8415 Ventilation Gp-Paver
| 14***00 | Inlet-Blower | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***04 | Housing As-Blower | 1 |
292-9232 Ventilation Gp-Paver
| 10***25 | Hinge Assem. | 1 |
| 15***02 | Gauge-Differential Pressure; (Paver Ventilation) | 1 |
| 15***03 | Bracket-Gauge | 1 |
Fuel System
233-5034 Control Gp-Decelerator
| 09***12 | Spring | 2 |
| 11***18 | Clip | 2 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 2 |
226-7515 Filter & Lines Gp-Fuel
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
268-1835 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 1 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
328-2585 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
295-1410 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
249-5162 Lines Gp-Fuel
| 10***09 | Cap As-Filler; (Fast Fill Fuel) | 1 |
| 11***98 | Hose Assem. | 1 |
| 12***85 | Hose As | 1 |
191-0461 Lines Gp-Injector Hyd Pump
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
| 20***80 | Hose As | 1 |
247-7116 Plug Gp-Fuel Tank
| 14***11 | Plug Group | 2 |
| 24***16 | Plug Group-Fuel Tank | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
222-5900 Pump & Mtg Gp-Unit Inj Hyd
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 22***00 | Pump & Mtg Group-Unit Inj Hydraulic | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
192-4302 Pump Gp-Fuel
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
| 13***76 | Strainer; (Fuel Pump) | 1 |
268-1839 Pump Gp-Fuel Injection
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 26***35 | Injector Group-Fuel | 1 |
| 26***39 | Pump Group-Fuel Injection | 1 |
222-5958 Pump Gp-Fuel Injection
| 22***58 | Pump Group-Fuel Injection | 1 |
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 29***10 | Injector Group-Fuel | 1 |
249-6644 Pump Gp-Fuel Transfer
| 10***87 | Connector | 1 |
| 10***05 | Plate | 3 |
| 11***72 | Filter Group-Fuel; (Fuel) | 1 |
295-4777 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
319-0677 Pump Gp-Unit Injector Hyd
| 15***36 | Cartridge | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 1F***60 | Washer Roll-Over Group To Deck | 1 |
304-0677 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
254-4357 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
312-0677 Pump Gp-Unit Injector Hyd
| 16***36 | Bolt-Socket Head; (M5x0.8x18-mm) | 3 |
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
205-1306 Regulator Gp-Fuel Pressure
| 19***38 | Elbow Assem. | 0 |
| 20***06 | Name-Plate (Portuguese), Regulator Group-Fuel Pressure | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
232-0343 Regulator Gp-Fuel Pressure
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
149-2683 Separator Gp-Water
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
Grade References
109-5627 Leveler Gp -40-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5626 Leveler Gp -Outboard
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5622 Leveler Gp -40-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5625 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 7 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5624 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 6 |
| 08***38 | Channel | 2 |
| 10***04 | Tube; (1.1-M) | 1 |
109-5628 Leveler Gp -30-Ft Grade Reference
| 10***04 | Tube; (1.1-M) | 1 |
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5623 Leveler Gp -30-Ft Grade Reference
| 08***09 | Bracket | 12 |
| 08***38 | Channel | 4 |
| 10***04 | Tube; (1.1-M) | 1 |
Hydraulic System
077-3951 Cap Gp-Hydraulic Oil Filler
| 07***51 | Cap As-Filler Breather | 1 |
| 07***32 | Filter Element-Breather; (Hydraulic Oil Filter) | 1 |
| 07***26 | Gasket | 2 |
236-2088 Cover Gp -Without Generator
| 14***11 | Plug Group | 1 |
| 16***16 | Plug As | 1 |
| 23***88 | Cover Group; -Without Generator | 1 |
236-2087 Cover Gp -Without Ventilation
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
| 20***34 | Plate-Cover | 1 |
| 23***87 | Cover Group; -Without Ventilation | 1 |
230-9611 Cylinder & Mtg Gp-Auger
| 14***68 | Elbow Group | 4 |
| 17***51 | Pin-Clevis | 4 |
| 20***75 | Cylinder Group-Hydraulic; -Auger Hoist, Rh | 1 |
230-9608 Cylinder & Mtg Gp-Hopper
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 10***44 | Elbow | 1 |
| 13***06 | Pin As | 2 |
249-6635 Cylinder & Mtg Gp-Screed Hoist
| 14***74 | Elbow As | 2 |
| 16***88 | Elbow; (90-Deg) | 1 |
| 17***51 | Pin-Clevis | 4 |
249-6637 Cylinder & Mtg Gp-Steering
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 1A***68 | Nut | 1 |
249-6636 Cylinder & Mtg Gp-Tow Point
| 00***39 | Bearing-Aligning; (Self Aligning) | 2 |
| 14***74 | Elbow As | 4 |
| 17***51 | Pin-Clevis | 2 |
338-9798 Cylinder Gp-Hydraulic -Steering
| 33***98 | Cylinder Group-Hydraulic; -Steering | 1 |
203-4276 Cylinder Gp-Hydraulic -Auger Hoist, Lh
| 20***76 | Cylinder Group-Hydraulic; -Auger Hoist, Lh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 25***75 | Kit-Seal; (Auger Hoist) | 1 |
135-0217 Cylinder Gp-Hydraulic -Extender
| 03***39 | Ring-Back-Up | 1 |
| 12***75 | Ring-Wear | 2 |
| 13***17 | Cylinder Group-Hydraulic; -Extender | 1 |
195-2884 Cylinder Gp-Hydraulic -Tow Point
| 19***84 | Cylinder Group-Hydraulic; -Tow Point | 1 |
| 23***82 | Kit-Seal; (Tow Point Cylinder) | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
135-0220 Cylinder Gp-Hydraulic -Hopper
| 13***20 | Cylinder Group-Hydraulic; -Hopper | 1 |
| 13***21 | Kit-Seal; (Hopper Cylinder) | 1 |
| 5E***32 | Ring | 1 |
235-8826 Cylinder Gp-Hydraulic -Screed Hoist
| 23***05 | Kit-Seal; (Screed Hoist Cylinder) | 1 |
| 23***26 | Cylinder Group-Hydraulic; -Screed Hoist | 1 |
| 24***73 | Ring-Retaining | 1 |
203-4275 Cylinder Gp-Hydraulic -Auger Hoist, Rh
| 20***75 | Cylinder Group-Hydraulic; -Auger Hoist, Rh | 1 |
| 24***11 | Ring-Retaining | 1 |
| 24***14 | Kit-Seal; (Auger Hoist) | 1 |
146-3166 Cylinder Gp-Hydraulic -Steering
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 14***66 | Cylinder Group-Hydraulic; -Steering | 1 |
| 15***88 | Seal-Crown | 1 |
278-0616 Cylinder Gp-Hydraulic
| 20***62 | Kit-Seal; (Extender Cylinder) | 1 |
| 27***16 | Cylinder Group-Hydraulic | 1 |
| 5D***86 | Locknut; (7/8-14-Thd) | 1 |
197-9766 Cylinder Gp-Hydraulic -Slope
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 14***61 | Plug | 2 |
| 14***62 | Seal-Washer | 2 |
230-9601 Filter & Mtg Gp-Hydraulic -Vibratory
| 14***41 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***82 | Elbow As | 1 |
230-9594 Filter & Mtg Gp-Hydraulic -Charge, Propel
| 14***82 | Elbow As | 3 |
| 15***32 | Elbow As | 1 |
| 16***31 | Elbow As | 2 |
196-7614 Filter Gp-Oil -Hydraulic
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 19***14 | Filter Group-Oil; -Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
192-0717 Filter Gp-Oil -Hydraulic
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 19***17 | Filter Group-Oil; -Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
176-9415 Filter Gp-Oil -Hydraulic Tank
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
| 17***15 | Filter Group-Oil; -Hydraulic Tank | 1 |
222-2601 Hydraulic Ar
| 22***01 | Hydraulic Ar | 1 |
| 23***86 | Hydraulic Ar-Fan | 1 |
| 23***87 | Tank & Mtg Group-Hydraulic | 1 |
255-4800 Hydraulic Ar -Truck Hitch
| 25***89 | Valve & Mtg Group-Truck Hitch | 1 |
| 25***90 | Lines Group-Truck Hitch | 1 |
| 25***00 | Hydraulic Ar; -Truck Hitch | 1 |
241-3282 Hydraulic Ar-Auxiliary
| 23***02 | Pump & Mtg Group-Auxiliary | 1 |
| 23***03 | Valve & Mtg Group-Auxiliary | 1 |
| 23***04 | Valve & Mtg Group-Control; -Parking Brake Manual Release | 1 |
230-9586 Hydraulic Ar-Fan
| 23***86 | Hydraulic Ar-Fan | 1 |
| 23***22 | Lines Group-Hydraulic Fan | 1 |
| 23***23 | Pump & Mtg Group-Hydraulic Fan | 1 |
241-3281 Hydraulic Ar-Vibratory
| 23***99 | Valve & Mtg Group-Vibratory; -Vibratory Bypass | 1 |
| 23***01 | Filter & Mtg Group-Hydraulic; -Vibratory | 1 |
| 24***81 | Hydraulic Ar-Vibratory | 1 |
249-6640 Lines Gp-Brake & Shift
| 10***05 | Plate | 2 |
| 12***56 | Hose As | 4 |
| 14***67 | Elbow Group; (Each Includes) | 5 |
249-6632 Lines Gp-Conveyor
| 11***79 | Hose As | 1 |
| 11***87 | Hose As | 1 |
| 12***49 | Hose As | 1 |
249-6639 Lines Gp-Cylinder -Auger Hoist
| 10***03 | Plate-Cover | 5 |
| 10***05 | Plate | 2 |
| 15***20 | Sleeve; (52.5-cm Each) | 0 |
311-4879 Lines Gp-Extender
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***36 | Elbow As. | 2 |
| 16***32 | Pin | 2 |
112-3469 Lines Gp-Extender
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 11***69 | Lines Group-Extender | 1 |
| 13***17 | Cylinder Group-Hydraulic; -Extender | 2 |
197-5289 Lines Gp-Extender
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 14***18 | Connector As | 2 |
| 14***74 | Elbow As | 2 |
251-2000 Lines Gp-Generator
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 13***75 | Hose As | 1 |
| 14***77 | Hose Assem. | 1 |
249-7691 Lines Gp-Grade & Slope
| 10***05 | Plate | 4 |
| 14***30 | Hose As | 4 |
| 14***30 | Hose As | 2 |
249-6638 Lines Gp-Hopper
| 10***05 | Plate | 7 |
| 10***06 | Plate As | 2 |
| 11***18 | Hose Assem. | 2 |
251-2087 Lines Gp-Hydraulic -Front Wheel Assist
| 10***03 | Plate-Cover | 1 |
| 11***35 | Hose As | 1 |
| 14***21 | Connector As | 2 |
230-9622 Lines Gp-Hydraulic Fan
| 10***21 | Hose As | 1 |
| 11***76 | Hose As | 1 |
| 14***12 | Reducer As-Orfs | 1 |
251-5853 Lines Gp-Paver Ventilation
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***17 | Reducer As-Orfs | 1 |
| 17***15 | Strap; (Dual Clamp) | 1 |
249-6641 Lines Gp-Pump -Auxiliary
| 11***66 | Hose Assem. | 1 |
| 14***44 | Plate-Retainer | 1 |
| 14***55 | Elbow As. | 1 |
249-6642 Lines Gp-Return
| 14***88 | Hose As | 1 |
| 17***15 | Strap; (Dual Clamp) | 1 |
| 19***07 | Bolt-Stacking; (M6x1x73-mm) | 2 |
230-9613 Lines Gp-Screed
| 10***05 | Plate | 4 |
| 14***09 | Hose As | 1 |
| 14***66 | Elbow Group | 2 |
311-1959 Lines Gp-Slope
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***84 | Pin As | 4 |
| 14***13 | Adapter Group | 1 |
197-5285 Lines Gp-Slope
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 2 |
| 10***40 | Spacer; (10.74x17.14x7-mm Thk) | 4 |
| 10***84 | Pin As | 4 |
249-6643 Lines Gp-Steering
| 10***03 | Plate-Cover | 15 |
| 10***02 | Hose As | 1 |
| 14***88 | Hose As | 1 |
251-2090 Lines Gp-Truck Hitch
| 10***03 | Plate-Cover | 2 |
| 10***05 | Plate | 2 |
| 10***84 | Hose As | 2 |
311-4878 Lines Gp-Vibratory
| 07***84 | Clamp | 3 |
| 08***86 | Clamp | 2 |
| 11***60 | Strap | 1 |
230-7543 Lines Gp-Vibratory
| 10***05 | Plate | 7 |
| 14***09 | Adapter As | 2 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
249-6633 Lines Gp-Vibratory
| 10***29 | Hose As | 1 |
| 14***80 | Elbow As | 1 |
| 14***55 | Union As | 2 |
112-3467 Lines Gp-Vibratory
| 07***84 | Clamp | 6 |
| 08***86 | Clamp | 2 |
| 10***84 | Hose As | 1 |
251-8207 Manifold Gp-Control -Auxiliary
| 10***03 | Manifold; (Forward Return,Rear Return) | 1 |
| 14***38 | Elbow | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
230-9605 Manifold Gp-Cooling -Return, Oil Cooler Bypass
| 14***09 | Adapter As | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
| 14***81 | Elbow Group | 1 |
230-9597 Motor & Mtg Gp-Auger
| 11***80 | Elbow | 1 |
| 14***27 | Connector Group | 4 |
| 14***72 | Elbow Group | 4 |
230-9659 Motor & Mtg Gp-Generator
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 15***37 | Elbow Group | 1 |
| 20***92 | Elbow As; (90-Deg) | 1 |
230-9624 Motor & Mtg Gp-Hydraulic Fan
| 14***23 | Connector As. | 2 |
| 14***65 | Elbow | 1 |
| 23***24 | Motor & Mtg Group-Hydraulic Fan | 1 |
241-8178 Motor & Mtg Gp-Propel
| 14***58 | Elbow As | 2 |
| 23***81 | Motor Group-Piston; -Propel | 2 |
| 24***78 | Motor & Mtg Group-Propel | 1 |
235-4847 Motor & Mtg Gp-Ventilation
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***74 | Elbow As | 1 |
| 15***50 | Elbow As | 1 |
230-9627 Motor Gp-Gear -Hydraulic Fan
| 14***15 | Dowel | 2 |
| 19***10 | Key-Woodruff | 1 |
| 23***27 | Motor Group-Gear; -Hydraulic Fan | 1 |
235-4849 Motor Gp-Gear -Paver Ventilation
| 23***49 | Motor Group-Gear; -Paver Ventilation | 1 |
| 26***11 | Kit-Seal; (Paver Ventilation Motor) | 1 |
308-2125 Motor Gp-Gear -Vibratory
| 30***25 | Motor Group-Gear; -Vibratory | 1 |
| 31***08 | Kit-Seal | 1 |
8i-0721 Motor Gp-Gerotor -Vibratory
| 06***39 | Seal-O-Ring | 1 |
| 16***21 | Kit-Bearing; (Vibratory Motor) | 1 |
| 4D***86 | Seal--Bushing To Selector Valve Group | 1 |
253-1397 Motor Gp-Piston -Front Wheel Assist, Lh
| 09***44 | Ring-Retaining | 1 |
| 10***19 | Ring-Retaining | 1 |
| 15***09 | Kit-Seal; (Front Wheel Assist Motor) | 1 |
253-1396 Motor Gp-Piston -Front Wheel Assist, Rh
| 09***44 | Ring-Retaining | 1 |
| 10***19 | Ring-Retaining | 1 |
| 15***09 | Kit-Seal; (Front Wheel Assist Motor) | 1 |
227-5104 Motor Gp-Piston -Generator
| 10***78 | Bearing-Roller | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
230-9384 Motor Gp-Piston -Conveyor
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
| 13***17 | Washer; (Support) | 1 |
230-9381 Motor Gp-Piston -Propel
| 10***84 | Piston | 9 |
| 11***85 | Retainer-Guide | 1 |
| 11***86 | Shim-Retainer | 1 |
190-8789 Motor Gp-Piston -Auger
| 12***13 | Gasket-End Cap | 1 |
| 12***17 | Pin | 1 |
| 12***68 | Plate-Valve | 1 |
291-9243 Motor Gp-Piston
| 10***84 | Piston | 9 |
| 11***87 | Kit-Overhaul Seal | 1 |
| 11***34 | Bolt | 6 |
230-9602 Pump & Mtg Gp-Auxiliary
| 10***20 | Seal-O-Ring | 1 |
| 15***56 | Elbow As | 1 |
| 20***15 | Elbow As | 1 |
230-9657 Pump & Mtg Gp-Generator
| 11***01 | Seal (Rear Pump To Center Pump) | 1 |
| 14***16 | Connector Group | 1 |
| 14***90 | Elbow Group | 1 |
230-9623 Pump & Mtg Gp-Hydraulic Fan
| 14***55 | Elbow As. | 1 |
| 14***29 | Tee As-Orfs | 1 |
| 22***86 | Elbow | 1 |
241-8132 Pump & Mtg Gp-Propel
| 12***88 | Flange-Split | 6 |
| 13***53 | Union | 1 |
| 13***96 | Elbow | 1 |
232-1533 Pump Gp-Gear -Charge, Conveyor
| 23***33 | Pump Group-Gear; -Charge, Conveyor | 1 |
| 23***03 | Kit-Seal; (Gear Pump)(Charge, Conveyor) | 1 |
245-1145 Pump Gp-Gear -Hydraulic Fan
| 10***73 | Nut-Track | 1 |
| 13***98 | Seal-Lip Type | 1 |
| 15***33 | Key | 1 |
294-0857 Pump Gp-Gear
| 10***73 | Nut-Track | 1 |
| 13***98 | Seal-Lip Type | 1 |
| 15***33 | Key | 1 |
333-3638 Pump Gp-Gear
| 23***03 | Kit-Seal; (Gear Pump)(Charge, Conveyor) | 1 |
| 33***38 | Pump Group-Gear | 1 |
285-4087 Pump Gp-Piston -Propel, Lh
| 03***39 | Seal-O-Ring (Id=9.25mm) | 4 |
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
230-9378 Pump Gp-Piston -Propel, Lh
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 10***96 | Kit-Manifold | 1 |
| 10***01 | Swashplate | 1 |
230-9379 Pump Gp-Piston -Propel, Rh
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 10***96 | Kit-Manifold | 1 |
| 10***01 | Swashplate | 1 |
269-0533 Pump Gp-Piston
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 12 |
| 26***60 | Dowel | 4 |
| 26***33 | Pump Group-Piston; -Conveyor | 1 |
230-9383 Pump Gp-Piston -Auger Conveyor, Drag Conveyor, Rh
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 07***53 | Pin; (Spring) | 2 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 2 |
230-9550 Pump Gp-Piston -Generator
| 00***54 | Cup-Roller Bearing | 1 |
| 03***48 | Cone-Bearing | 1 |
| 1P***72 | Cup-Roller Bearing | 1 |
230-9382 Pump Gp-Piston -Auger Conveyor, Drag Conveyor, Lh
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 07***53 | Pin; (Spring) | 2 |
| 11***30 | Link | 2 |
333-7609 Pump Gp-Piston
| 33***09 | Pump Group-Piston | 1 |
230-9385 Pump Gp-Piston -Auxiliary
| 00***91 | Cup-Roller Bearing | 1 |
| 07***35 | Kit-Bearing; (Auxiliary Pump) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
285-4088 Pump Gp-Piston -Propel, Rh
| 03***39 | Seal-O-Ring (Id=9.25mm) | 4 |
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
333-7607 Pump Gp-Piston
| 33***07 | Pump Group-Piston | 1 |
230-9587 Tank & Mtg Gp-Hydraulic
| 03***06 | Seal (Use As Required) | 1 |
| 10***05 | Plate | 1 |
| 12***13 | Film-Instruction; (Hydraulic Oil Level) | 1 |
230-9588 Tank Gp-Hydraulic
| 07***51 | Cap As-Filler Breather | 1 |
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***14 | Seal-O-Ring (Id=9.80mm) | 4 |
230-9603 Valve & Mtg Gp-Auxiliary
| 09***86 | Coupling | 1 |
| 14***25 | Connector As. | 2 |
| 14***28 | Connector Assem. | 1 |
230-9658 Valve & Mtg Gp-Control -Generator
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***27 | Connector Group | 2 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
249-6634 Valve & Mtg Gp-Control -Steering
| 00***21 | Nut; (13/16-20-Thd) | 2 |
| 07***43 | Steering Column Group | 2 |
| 10***12 | Bracket As-Motor | 2 |
230-9604 Valve & Mtg Gp-Control -Parking Brake Manual Release
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***61 | Elbow Group | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
251-2083 Valve & Mtg Gp-Flow Divider -Front Wheel Assist
| 12***88 | Tee | 1 |
| 14***15 | Connector As | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
230-9625 Valve & Mtg Gp-Hydraulic Fan
| 11***20 | Elbow | 1 |
| 15***30 | Connector As | 1 |
| 23***25 | Valve & Mtg Group-Hydraulic Fan | 1 |
230-9607 Valve & Mtg Gp-Tow Point
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
| 14***74 | Elbow As | 4 |
251-2089 Valve & Mtg Gp-Truck Hitch
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***61 | Elbow Group | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
230-9599 Valve & Mtg Gp-Vibratory -Vibratory Bypass
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 1 |
| 15***59 | Tee Group | 1 |
| 16***74 | Tee Group | 1 |
190-8803 Valve Gp-Control -Vibratory Bypass
| 19***03 | Valve Group-Control; -Vibratory Bypass | 1 |
| 22***80 | Valve Group-Control; (Vibratory Bypass) | 1 |
| 22***83 | Coil | 1 |
251-4844 Valve Gp-Control -Generator
| 25***44 | Valve Group-Control; -Generator | 1 |
| 25***77 | Kit-Seal; (Generator Control Valve) | 1 |
| 25***79 | Valve As-Needle | 1 |
272-1594 Valve Gp-Control -Auxiliary
| 11***29 | Ring-Backup | 6 |
| 23***82 | Nut-Special | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
230-9160 Valve Gp-Control -Truck Hitch
| 23***82 | Nut-Special | 1 |
| 23***60 | Valve Group-Control; -Truck Hitch | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
284-3559 Valve Gp-Control -Auxiliary
| 11***29 | Ring-Backup | 6 |
| 23***82 | Nut-Special | 1 |
| 24***41 | Kit-Seal; (Pressure Reducing Valve) | 1 |
230-9628 Valve Gp-Control
| 22***81 | Coil | 1 |
| 22***82 | Seal-O-Ring | 1 |
| 22***83 | Nut-Knurl; (1/2-20-Thd) | 1 |
208-1632 Valve Gp-Control -Vibratory
| 19***47 | Valve Group-Control; (Vibratory) | 1 |
| 19***41 | Cartridge As-Valve | 1 |
| 20***57 | Kit-Seal; (Flow Control Valve) | 1 |
195-2880 Valve Gp-Counterbalance -Tow Point
| 03***53 | Seal-O-Ring; (08.92mm Id) | 2 |
| 11***16 | Kit-Seal; (Counterbalance Valve) | 1 |
| 19***77 | Valve Group-Counterbalance; (Tow Point) | 2 |
230-9389 Valve Gp-Flow Divider -Front Wheel Assist
| 22***90 | Nut | 1 |
| 22***91 | Seal-O-Ring | 1 |
| 23***89 | Valve Group-Flow Divider; -Front Wheel Assist | 1 |
276-6041 Valve Gp-Pump Control -Propel
| 03***39 | Seal-O-Ring (Id=9.25mm) | 4 |
| 12***42 | Gasket | 1 |
| 27***41 | Valve Group-Pump Control; -Generator | 1 |
300-0505 Valve Gp-Solenoid
| 25***57 | Kit-Seal; (Check Valve) | 1 |
| 25***37 | Valve Group-Solenoid; (24-Volt) | 2 |
| 27***10 | Coil-Solenoid | 2 |
310-8017 Valve Gp-Solenoid
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 31***17 | Valve Group-Solenoid; -Piston Pump | 1 |
| 31***18 | Valve-Servo | 2 |
276-6042 Valve Gp-Solenoid -Pump Control
| 26***51 | Kit-Seal; (Solenoid Valve)(Solenoid Valve) | 1 |
| 26***45 | Nut; (1/2-32-Thd) | 1 |
| 27***42 | Valve Group-Solenoid; -Pump Control | 1 |
300-0504 Valve Gp-Solenoid -Extender, Slope
| 25***57 | Kit-Seal; (Check Valve) | 1 |
| 25***37 | Valve Group-Solenoid; (24-Volt) | 1 |
| 27***10 | Coil-Solenoid | 2 |
103-3602 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***02 | Valve Group-Solenoid; -Extender, Slope | 1 |
| 11***21 | Coil | 2 |
332-1453 Valve Gp-Solenoid
| 33***53 | Valve Group-Solenoid | 1 |
8i-0143 Vibratory Gp
| 09***99 | Fitting-Grease; (Hydraulic) | 3 |
| 10***95 | Bearing | 8 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
197-5294 Vibratory Gp
| 10***90 | Coupling | 4 |
| 10***95 | Bearing | 8 |
| 10***39 | Key-Square | 4 |
Implements
242-3916 Extension Ar -24-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 18***08 | Extension Group-Screed; -Diesel Heat, 24-In | 2 |
| 18***19 | Extension Group-Screed; -Diesel Heat, 12-In | 2 |
242-3914 Extension Ar -20-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 18***19 | Extension Group-Screed; -Diesel Heat, 12-In | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
106-3482 Extension Ar -Diesel Heat, 12-In
| 10***51 | Harness As-Screed; (Extension) | 1 |
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 5 |
106-3483 Extension Ar -Diesel Heat, 28-In
| 10***52 | Harness As-Screed; (Extension) | 1 |
| 10***83 | Extension Ar; -Diesel Heat, 28-In | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 8 |
242-3915 Extension Ar -22-Ft
| 11***09 | Bearing Group-Auger | 2 |
| 18***08 | Extension Group-Screed; -Diesel Heat, 24-In | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
242-3911 Extension Ar
| 10***83 | Extension Ar; -Diesel Heat, 28-In | 2 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
241-9103 Extension Ar-Auger
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
| 21***53 | Extension Group-Main Frame | 1 |
253-4761 Extension Ar-Screed
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 3 |
242-3909 Extension Ar-Screed
| 10***82 | Extension Ar; -Diesel Heat, 12-In | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
253-4760 Extension Ar-Screed
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
259-2395 Extension Gp-Screed -24-Ft
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
8i-0521 Extension Gp-Screed -Diesel Heat With Vibration, 28-In
| 10***95 | Bearing | 2 |
| 10***12 | Shaft As-Vibratory | 1 |
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
259-2394 Extension Gp-Screed -22-Ft
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
245-9081 Extension Gp-Screed -Electric Heat, 12-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
245-9083 Extension Gp-Screed -Electric Heat, 12-In
| 1A***68 | Nut | 4 |
| 20***59 | Plate | 1 |
| 20***63 | Frame As | 1 |
253-4744 Extension Gp-Screed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 8 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
245-9084 Extension Gp-Screed -Electric Heat With Vibration, 24-In
| 10***95 | Bearing | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
259-2393 Extension Gp-Screed -20-Ft
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
253-4745 Extension Gp-Screed -Electric Heat, 24-In
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 10 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 6 |
245-9082 Extension Gp-Screed -Electric Heat With Vibration, 28-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***31 | Bar-Spacer | 1 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
185-5419 Extension Gp-Screed -Diesel Heat, 12-In
| 18***19 | Extension Group-Screed; -Diesel Heat, 12-In | 1 |
| 1A***68 | Nut | 4 |
| 20***59 | Plate | 1 |
8i-0520 Extension Gp-Screed -Diesel Heat, 12-In
| 10***19 | Locknut; (2-1/4-16-Thd) | 2 |
| 10***32 | Bar-Spacer | 1 |
| 10***34 | Plate | 1 |
185-5408 Extension Gp-Screed -Diesel Heat, 24-In
| 10***95 | Bearing | 2 |
| 10***35 | Key-Square; (3/16in X 3/4in Lg) | 2 |
| 10***51 | Harness As-Screed; (Extension) | 1 |
259-2391 Extension Gp-Screed -21-Ft, 6-In
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 2 |
| 19***06 | Extension Group-Auger; -12-In, Lh | 2 |
259-2392 Extension Gp-Screed -24-Ft, 2-In
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***09 | Bearing Group-Auger | 2 |
| 19***87 | Extension Group-Auger; -12-In, Rh | 3 |
251-2088 Hitch Ar-Truck
| 25***88 | Hitch Ar-Truck | 1 |
| 25***89 | Valve & Mtg Group-Truck Hitch | 1 |
| 25***90 | Lines Group-Truck Hitch | 1 |
276-3178 Hitch Gp-Truck
| 16***76 | Hitch Group-Truck; -Oscillating | 1 |
| 19***08 | Bar | 1 |
| 19***09 | Pin As | 1 |
166-7676 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
256-2162 Roller Ar-Push
| 11***58 | Screw; 12-Point Screw, Screw, Roller Group-Push | 1 |
| 19***08 | Bar | 1 |
| 19***09 | Pin As | 1 |
118-8358 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 10 |
| 11***57 | Roller As | 1 |
| 11***58 | Screw; 12-Point Screw, Screw, Roller Group-Push | 1 |
112-1276 Shaft Gp-Drive -Eccentric Weight
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 11***76 | Shaft Group-Drive; -Eccentric Weight | 1 |
| 24***28 | Seal | 1 |
Lubrication System
191-0523 Adapter Gp-Oil Line -Fuel Injection Pump
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 19***22 | Adapter | 1 |
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
222-5946 Breather Gp
| 14***54 | Bolt; (M8x1.25x105-mm) | 1 |
| 16***10 | Breather As; (Crankcase) | 1 |
| 22***46 | Breather Group; -Crankcase | 1 |
233-9849 Filter Gp-Engine Oil
| 14***29 | Connector As | 1 |
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
220-1194 Fumes Disposal Gp
| 16***48 | Stud; (M8x1.25x40-mm, M8x1.25x17.5-mm) | 1 |
| 22***94 | Fumes Disposal Group | 1 |
| 22***10 | Hose-Disposal; (Fumes Disposal) | 1 |
223-9984 Gauge Gp-Oil Level (Dipstick) -Engine
| 14***50 | Tube As | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 22***84 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
280-7443 Gauge Gp-Oil Level (Dipstick) -Engine
| 14***50 | Tube As | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 28***70 | Gauge-Oil Level; (Dipstick)(Engine) | 1 |
117-5125 Lines Gp-Engine Oil
| 11***25 | Lines Group-Engine Oil | 1 |
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
159-0285 Lines Gp-Turbocharger Oil
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 15***85 | Lines Group-Turbocharger Oil; (Turbocharger Oil) | 1 |
| 15***18 | Tube As-Oil Drain | 1 |
237-8063 Manifold Gp-Engine Oil
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 4 |
| 22***96 | Manifold-Oil; (Engine) | 1 |
| 23***63 | Manifold Group-Engine Oil | 1 |
246-1569 Mounting Gp-Engine Oil Filter
| 17***20 | Strap-Dual Clamp | 3 |
| 24***69 | Mounting Group-Engine Oil Filter | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
247-2022 Mounting Gp-Oil Level Gauge
| 03***80 | Spacer; (9x16x36-mm) | 1 |
| 24***22 | Mounting Group-Oil Level Gauge | 1 |
| 8M***70 | Clip .5 In. (1.27 cm) I.D. Hole | 1 |
192-2981 Pump Gp-Engine Oil
| 19***81 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
200-4497 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
Machine Arrangement
262-0721 Chassis Ar -Bg-260d
| 19***96 | Guide Group-Steering | 1 |
| 22***13 | Frame Group-Main | 1 |
| 23***42 | Hopper Group | 1 |
222-2598 Chassis Ar -Ap-1000d
| 19***96 | Guide Group-Steering | 1 |
| 22***98 | Chassis Ar; -Ap-1000d | 1 |
| 22***13 | Frame Group-Main | 1 |
222-2596 General Ar -Ap-1000d
| 22***78 | Operator Ar | 1 |
| 22***96 | General Ar; -Ap-1000d | 1 |
| 22***97 | Drive Ar-Final | 1 |
262-0720 General Ar -Bg-260d
| 22***78 | Operator Ar | 1 |
| 22***97 | Drive Ar-Final | 1 |
| 22***99 | Electrical Ar | 1 |
222-2603 Installation Ar-Screed
| 22***03 | Installation Ar-Screed | 1 |
| 23***66 | Beam Group-Transverse | 1 |
| 24***48 | Arm Group-Tow | 1 |
195-9753 Kit-Maintenance
| 07***01 | Switch; (Travel Pave Maneuver) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
| 10***87 | Switch As-Toggle; (Screed Raise/Hld/Float) | 1 |
231-4642 Screed Ar
| 19***85 | Lines Group-Slope | 1 |
| 19***87 | Frame Group-Screed | 1 |
| 19***88 | Crown Group | 1 |
229-3115 Screed Ar -10-20b
| 11***67 | Lines Group-Vibratory | 1 |
| 11***69 | Lines Group-Extender | 1 |
| 11***39 | Platform Group | 1 |
Operator Station
230-3640 Console Gp-Instrument -Center
| 22***67 | Support As | 1 |
| 23***40 | Console Group-Instrument; -Center | 1 |
| 29***45 | Console Group-Instrument | 1 |
291-2145 Console Gp-Instrument
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 46 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
235-3509 Console Gp-Instrument -Center
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 46 |
| 10***84 | Relay As; (24-Volt) | 1 |
| 11***18 | Clip | 6 |
318-7413 Console Gp-Instrument
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 46 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***84 | Relay As; (24-Volt) | 1 |
250-3397 Console Gp-Operator
| 10***05 | Cap-Receptacle | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 11***18 | Clip | 14 |
160-6567 Control Gp-Unprgmed Monitor -Caterpillar Monitoring System
| 16***67 | Control Group-Unprgmed Monitor; -Caterpillar Monitoring System | 1 |
| 25***03 | Control Group-Unprogrammed; (Caterpillar Monitoring System)(Caterpillar Monitoring System) | 1 |
330-6558 Display Gp-Monitor -Accugrade
| 15***62 | Knob | 2 |
| 2M***19 | Ring-Retaining | 2 |
| 32***46 | Box Group-Control | 1 |
348-3782 Display Gp-Monitor -Accugrade
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 10 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
330-6089 Display Gp-Monitor -Unprogrammed
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 14***44 | Plug As-Connector; (70-Pin) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
243-1782 Floor Mat Gp
| 20***00 | Floor Mat; (Operator Station Floor) | 1 |
| 20***02 | Floor Mat; (Operator Station Floor) | 1 |
| 23***93 | Tread | 1 |
233-3564 Guard Gp-Vandalism
| 21***13 | Handle | 4 |
| 23***64 | Guard Group-Vandalism | 1 |
| 24***68 | Cover | 1 |
132-3090 Lever Gp-Propel
| 08***31 | Tube As | 1 |
| 08***21 | Gasket | 1 |
| 08***22 | Plate-Mounting | 1 |
101-9559 Lock Gp-Rotation
| 10***59 | Lock Group-Rotate | 1 |
| 10***60 | Plate | 1 |
| 13***64 | Bushing | 2 |
166-6943 Module Gp-Quad Gauge
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 16***43 | Module Group-Quad Gauge; -Fuel Level-Engine Coolant Temperature-Hydraulic Oil Temp-Engine Oil Pressure | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
222-2578 Operator Ar
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 22***78 | Operator Ar | 1 |
| 23***57 | Platform Group-Operator; -Lh | 1 |
235-3511 Panel Gp-Instrument -Center Console
| 10***66 | Bezel | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***87 | Start Switch Assembly; (Key)(Engine) | 1 |
228-9128 Panel Gp-Instrument -Operator Console
| 08***41 | Switch As-Toggle; (Lh Feeder Auto/Manual Control) | 1 |
| 08***12 | Lens-Clear; (Hazard Warning Lights) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
197-5295 Platform Gp
| 19***83 | Bolt-Shoulder; (3/8-16x0.63-In) | 2 |
| 19***01 | Bracket | 2 |
| 19***03 | Platform As; (Extender) | 2 |
118-4339 Platform Gp
| 11***14 | Platform As-Top | 1 |
| 11***39 | Platform Group | 1 |
| 12***51 | Support As-Platform; (Rh Outer) | 1 |
247-1873 Platform Gp-Operator
| 24***73 | Platform Group-Operator | 1 |
| 24***03 | Platform As; (Rh) | 1 |
| 24***04 | Platform As; (Lh) | 1 |
231-7162 Platform Gp-Operator -Rh
| 10***59 | Lock Group-Rotate | 1 |
| 16***22 | Screw-Button Head; (M8x1.25x30-mm) | 2 |
| 19***45 | Cover As-Console; (Operator) | 1 |
231-7157 Platform Gp-Operator -Lh
| 10***59 | Lock Group-Rotate | 1 |
| 16***22 | Screw-Button Head; (M8x1.25x30-mm) | 2 |
| 19***45 | Cover As-Console; (Operator) | 1 |
235-3151 Seat Gp-Suspension -Vinyl
| 19***32 | Kit-Foam Back | 1 |
| 20***36 | Kit-Damper | 1 |
| 20***37 | Kit-Seat; (Indicators) | 1 |
199-4298 Seat Gp-Suspension -Vinyl
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 19***98 | Seat Group-Suspension; -Vinyl | 1 |
| 23***67 | Seat Belt Group; (Retractable, 76-mm)(Vinyl) | 2 |
187-6649 Umbrella Gp
| 18***49 | Umbrella Group; -Ap-650b | 1 |
106-8541 Umbrella Gp
| 10***41 | Umbrella Group; -Bg-225c | 1 |
Power Train
251-2178 Assist Gp-Front Wheel
| 00***31 | Cup-Bearing | 4 |
| 00***43 | Nut | 2 |
| 03***01 | Screw; (5/16-18x1.56-In) | 4 |
222-2597 Drive Ar-Final
| 22***97 | Drive Ar-Final | 1 |
| 24***73 | Drive Group-Final | 2 |
241-4273 Drive Gp-Final
| 0T***56 | Bolt (2 1/2" Long) | 20 |
| 13***48 | Mount-Planetary | 1 |
| 14***06 | Shim; (0.05-mm Thk) | 6 |
352-2524 Drive Gp-Hydrostatic
| 27***40 | Kit-Seal; (Pump Drive) | 1 |
| 27***41 | Kit-Bearing | 1 |
| 32***90 | Gauge-Sight; (Oil Level) | 1 |
241-3279 Hydraulic Ar-Propel
| 23***94 | Filter & Mtg Group-Hydraulic; -Charge, Propel | 1 |
| 24***79 | Hydraulic Ar-Propel | 1 |
| 24***32 | Pump & Mtg Group-Propel | 1 |
249-6631 Lines Gp-Propel
| 11***72 | Hose As | 1 |
| 11***13 | Hose As | 1 |
| 12***01 | Hose As | 1 |
321-9805 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 15***84 | Cone | 2 |
| 15***85 | Cup | 2 |
325-4687 Planetary Gp-Final Drive
| 09***07 | Bolt; (M16x2x120-mm) | 4 |
| 13***67 | Piston-Brake | 1 |
| 15***84 | Cone | 2 |
119-8698 Wheel & Tire Gp
| 10***34 | Extension-Valve | 1 |
| 10***35 | Valve-Rim | 1 |
| 10***52 | Tire; (Tire 18.00 X 25-36 Ply) | 1 |
119-8107 Wheel & Tire Gp
| 11***05 | Wheel As | 1 |
| 11***07 | Wheel & Tire Group | 1 |
| 12***11 | Tire-Solid; (8in) | 2 |
124-3042 Wheel & Tire Gp
| 08***24 | Tire; (Tubeless 18x25-16ply) | 1 |
| 12***42 | Wheel & Tire Group | 1 |
| 18***59 | Wheel Group | 1 |
344-7092 Wheel & Tire Gp -Driven
| 12***11 | Tire-Solid; (8in) | 2 |
| 34***91 | Wheel As | 1 |
| 34***92 | Wheel & Tire Group; -Driven | 1 |
277-7809 Wheel & Tire Gp
| 10***34 | Extension-Valve | 1 |
| 10***35 | Valve-Rim | 1 |
| 11***84 | Tire; (16-R25)(16x25 Xgc) | 1 |
277-7810 Wheel Ar
| 27***09 | Wheel & Tire Group | 2 |
| 27***10 | Wheel Ar | 1 |
124-3041 Wheel Ar
| 12***41 | Wheel Ar | 1 |
| 12***42 | Wheel & Tire Group | 2 |
119-8102 Wheel Ar
| 11***02 | Wheel Ar | 1 |
| 11***98 | Wheel & Tire Group | 2 |
183-1160 Wheel Gp
| 11***25 | Wheel As | 1 |
| 18***60 | Wheel Group | 1 |
| 1J***87 | Flange | 2 |
277-7808 Wheel Gp
| 27***07 | Wheel As | 1 |
| 27***08 | Wheel Group | 1 |
| 2D***43 | Seal-O-Ring | 1 |
180-8059 Wheel Gp
| 12***43 | Wheel As | 1 |
| 18***59 | Wheel Group | 1 |
| 4K***79 | Seal-O-Ring | 1 |
Service Equipment And Supplies
254-1564 Film Gp -English
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
| 08***52 | Decal-Caution, Hopper Support | 2 |
| 19***40 | Film-Warning; (Grade Limit) | 1 |
279-7132 Film Gp -Portuguese
| 17***92 | Film-Warning; (Mounting) | 2 |
| 17***93 | Film-Warning; (Hopper Support) | 2 |
| 21***64 | Plate-Warning; (Shutdown) | 1 |
279-7129 Film Gp -Spanish
| 17***80 | Film-Warning; (Mounting Machine) | 2 |
| 17***81 | Film-Warning; (Hopper Support) | 2 |
| 21***63 | Plate-Warning; (Starting, Shutdown) | 1 |
279-7130 Film Gp -French
| 15***15 | Film-Warning; (Hopper Support) | 2 |
| 15***34 | Film-Warning; (Mounting) | 2 |
| 21***62 | Plate-Warning; (Starting, Shutdown) | 1 |
254-0056 Plate & Film Gp
| 08***54 | Film-Notice; (Screed Retract) | 2 |
| 10***08 | Film; (Screed Adjustment)(Extender Screed) | 1 |
| 10***14 | Handle | 1 |
262-0722 Plate & Film Gp
| 11***73 | Film-Stripe; (450-cm Each) | 0 |
| 11***75 | Film-Identification; (Barber-Greene)(Barber-Greene) | 3 |
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
243-5024 Plate & Film Gp
| 12***82 | Film-Information; (Height Scale)(Screed) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 2 |
| 12***13 | Film; (Tow Point Cylinder) | 2 |
254-0054 Plate & Film Gp
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 2 |
| 15***79 | Film-Instruction; (Grease)(Instructions) | 2 |
| 16***89 | Tack-Fastener | 4 |
266-4529 Pump & Motor Gp-Washdown -Water
| 26***29 | Pump & Motor Group-Washdown; -Water-Emulsion-Diesel Fuel | 1 |
| 31***68 | Kit-Diaphragm | 1 |
| 31***69 | Kit-Valve | 1 |
201-7598 Pump & Motor Gp-Washdown -Fuel Transfer
| 08***68 | Spacer | 1 |
| 17***71 | Motor Group-Electric; -Fuel Transfer Pump | 1 |
| 19***02 | Pump Group-Fuel | 1 |
262-3878 Tank Gp-Emulsion
| 26***70 | Tank As | 1 |
| 26***78 | Tank Group-Emulsion | 1 |
| 4B***82 | Ball; (9.52mm) | 1 |
263-2205 Washdown Gp-Ecology
| 00***14 | Coupling-Pipe | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Hose As | 1 |
Slope And Grade Control
233-3566 Beam Gp-Transverse
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 19***78 | Pad | 2 |
| 23***66 | Beam Group-Transverse | 1 |
168-6500 Cable Gp-Control -Grade
| 10***63 | Clamp | 1 |
| 11***95 | Plug | 1 |
| 11***63 | Cable; (Coiled) | 1 |
336-1300 Control Gp-Grade & Slope -Accugrade
| 09***49 | Bolt; (M8x1.25x40-mm) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
168-5031 Control Gp-Grade & Slope
| 14***22 | Cover | 1 |
| 14***25 | Seal-Bushing | 1 |
| 14***26 | Gasket | 1 |
239-3467 Control Gp-Grade & Slope
| 12***36 | Bracket-Mounting | 2 |
| 13***85 | Mount As | 2 |
| 13***87 | Plate | 2 |
209-3125 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***97 | Plug | 1 |
209-3130 Control Gp-Grade & Slope
| 11***10 | Screw-Pan Head | 8 |
| 11***50 | Kit-Transducer | 1 |
| 11***51 | Kit-Filter; (Foam)(Grade Sensor) | 1 |
209-3126 Control Gp-Grade & Slope
| 10***63 | Clamp | 1 |
| 11***96 | Plug | 1 |
| 11***97 | Plug | 1 |
197-7847 Sensor Gp-Grade -Averaging Ski
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 19***47 | Sensor Group-Grade; -Averaging Ski | 1 |
| 19***54 | Tube As | 1 |
122-0090 Sensor Gp-Grade -Averaging Ski
| 12***90 | Sensor Group-Grade; -Averaging Ski | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 12***99 | Arm-Follower | 1 |
122-0095 Sensor Gp-Grade -Sonic
| 11***29 | Cap-Dust | 1 |
| 12***95 | Sensor Group-Grade; -Sonic | 1 |
| 14***16 | Faceplate | 1 |
122-0094 Sensor Gp-Grade
| 11***29 | Cap-Dust | 1 |
| 12***94 | Sensor Group-Grade | 1 |
| 22***22 | Kit-Hub; (Grade Sensor) | 1 |
197-7848 Sensor Gp-Grade -Sonic
| 12***91 | Sensor Group-Sonic; -Grade | 1 |
| 19***48 | Sensor Group-Grade; -Sonic | 1 |
| 19***54 | Tube As | 1 |
209-3131 Sensor Gp-Grade -Sonic
| 10***63 | Clamp | 1 |
| 10***08 | Sensor Group-Grade; (Control) | 1 |
| 10***10 | Bail-Temperature | 1 |
209-3132 Sensor Gp-Grade -Averaging Ski
| 10***63 | Clamp | 1 |
| 10***23 | Cable As; (Grade) | 1 |
| 11***95 | Plug | 1 |
348-3783 Sensor Gp-Sonic
| 09***49 | Bolt; (M8x1.25x40-mm) | 4 |
| 13***39 | Screw-Flat Head; (M8x1.25x30-mm) | 4 |
| 27***73 | Clip | 2 |
122-0091 Sensor Gp-Sonic -Grade
| 12***91 | Sensor Group-Sonic; -Grade | 1 |
| 12***95 | Sensor Group-Grade; -Sonic | 1 |
| 13***83 | Cable As | 1 |
258-6580 Sensor Gp-Sonic -Averaging Ski
| 10***08 | Sensor Group-Grade; (Control) | 3 |
| 10***10 | Bail-Temperature | 3 |
| 11***50 | Kit-Transducer | 1 |
257-6255 Ski Gp-Averaging
| 25***29 | Mount As | 2 |
| 25***30 | Mount As | 2 |
| 25***55 | Ski Group-Averaging | 1 |
Undercarriage
251-2085 Bogie Gp
| 00***31 | Cup-Bearing | 8 |
| 00***43 | Nut | 4 |
| 03***01 | Screw; (5/16-18x1.56-In) | 4 |
AP-1000D serial number reference
The PIN plate on the AP-1000D is mounted at the back of the machine, below the operator station steps, riveted to the frame. The plate stamps the full 17-character product identification number (PIN); the machine serial number is the last 8 characters of that PIN, and the first 3 characters of the serial number are the prefix used to identify the build series for parts and service lookup. Read the prefix directly off the plate rather than off a listing or invoice, since resellers frequently mislabel paver variants.
| Prefix | Identifies | Notes |
|---|---|---|
| EAD | AP-1000D wheel-type asphalt paver tractor unit (paired in factory parts records with the BG-260D screed) | This is the only serial number prefix tied to the AP-1000D tractor across current Cat wear-parts reference tables (feeder system, auger, screed, grade-and-slope, and accessory tables all key off EAD for this model). Fitted with a Cat C7 turbocharged diesel with ACERT (Tier III); a few field listings show later-production units carrying the C7.1 ACERT successor engine, so confirm the exact engine off the data plate rather than assuming by prefix. Do not confuse with prefix 698 (the base AP-1000, no D suffix), AC4 (the AP-1000F, a later Tier 4 Final generation built around the C7.1 successor engine), DKH/T1F (AP-1000E), or A6P/FAC (the AP-1055D, a wider stablemate model). |
Frequently asked questions
What engine does the Cat AP-1000D use?
The AP-1000D runs a Cat C7 ACERT turbocharged inline six-cylinder diesel, Tier III certified, with 7.24 L displacement rated at approximately 167 kW (224 hp) gross.
What is the operating weight of the Cat AP-1000D?
Base tractor weight is about 14,741 kg (32,470 lb). With the screed installed, operating weight runs roughly 17,830-18,940 kg (39,320-41,755 lb), varying by which SE47, SE50, or SE60 screed and options are fitted.
What replaced the Cat AP-1000D?
The Tier IV AP1000, without the D suffix, replaced it. That refresh switched to the smaller Cat C3.3B engine and added SE60 FM screeds and paver-assist automation not offered on the D-series.
What AP-1000D owners discuss
What do operators say about the AP-1000D's propel and wheel-drive system?
The AP-1000D uses a fixed-displacement hydraulic motor driving a two-speed planetary at each wheel station, with front-wheel-assist optional for traction on wet mix or soft base. Operators describe propel response as smooth and predictable for holding mat consistency at paving speed, but the charge pump and propel valve stack are worth watching on higher-hour machines — sluggish creep speed or uneven left/right tracking usually traces back to a weak charge pump rather than the planetary itself. All-wheel drive helps on grade and loose base but doesn't eliminate wheel slip in greasy conditions the way a tracked Mobil-trac paver would.
What wear patterns show up on the feeder and auger system?
Same pattern reported across wheel pavers this size: floor plates in the feeder tunnel thin out and warp first, auger flights go from square-edged to pointed, and flight-bar wear lets mix pack up underneath instead of pushing it forward. Auger bearing seals are the item to watch closely — once a seal lets mix into the bearing, the bearing seizes fast and stops the machine cold, so a twice-daily grease habit (mid-shift and end-of-shift while still hot) is standard advice to purge contaminants before they settle. Under normal abrasive-mix conditions an auger is good for roughly four paving seasons before flights need replacing.
Are there known quirks with the C7 ACERT engine in this series?
The AP-1000D runs the Tier III C7 ACERT, turbocharged with air-to-air aftercooling, rated 167 kW (224 hp) gross at 2200 rpm. Shop talk on this engine family centers on the HEUI fuel system: injector wear and HEUI pump wear are the two most-cited failure points, and a failing HEUI pump can send metal filings through the injectors if it isn't caught early. Hard starting or a rough idle is more often traced to fuel filter restriction or a weak injector than to the ECM. Turbo wastegate/actuator sluggishness and coolant leaks at hose and gasket joints round out the recurring complaints — both are manageable with normal service intervals rather than inherent design faults.
What electrical or sensor issues come up most often?
Intermittent system-voltage faults are the most commonly cited electrical nuisance on this generation, usually chased back to a battery connection, ground strap, or charging-system component rather than the ECM itself. Boost pressure sensor signal drift is another one that shows up as an erratic code without a matching drivability complaint; techs generally check the sensor and its harness connector before condemning the part. Given the heat and vibration this machine's wiring lives with near the screed, hopper, and engine bay, connector corrosion and chafed harness sections are a more frequent root cause than a genuinely failed sensor.
What screed-related hydraulic issues are typical?
Lift cylinder packing wears over time and shows up as uneven screed lift side to side — a reseal corrects it. The eccentric assemblies run a hydraulic hose that stiffens and cracks with age and vibration, and a cracked eccentric hose is a common source of a sudden fluid leak at the screed itself. Slide-out extension bushings wear if mix is allowed to build up and get dragged in and out of the main beam, so keeping the extension tubes clean is treated as basic daily upkeep rather than optional. None of this is unique to the AP-1000D — it's the standard wear profile for any extending vibratory screed of this size and duty.
What should a buyer check on a used AP-1000D before purchase?
Verify hours against service records — with normal maintenance, 7,000 to 8,000 hours is considered a typical working life for a paver before major component work, so a machine well past that with thin records carries more risk than the hour meter alone suggests. Inspect the screed plates first since they're the fastest-wearing part on the whole machine, then check auger flights and feeder floor plates for the thinning and warping typical of this wear pattern. Confirm the serial prefix matches EAD for the true AP-1000D (Tier III C7 ACERT) rather than a relabeled or reconfigured unit, and cycle the propel, steering, and parking-brake systems through a full range before agreeing on price. Because propel, steering, and braking are safety-critical systems, have your dealer verify their condition and any stored ECM fault history during a pre-purchase inspection.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific AP-1000D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.