Caterpillarasphalt paver
Caterpillar AP-1000
Maintenance schedule, common problems & OEM parts breakdown
The Cat AP-1000 is a wheel-type (rubber-tired), highway-class asphalt paver built around a base paving width of about 3.0 m (10 ft), extendable with bolt-on or hydraulic screed sections to as much as roughly 7.6-7.8 m (25 ft) depending on the screed fitted. Across its production life the model carried a Cat 3116TA turbocharged diesel (base AP-1000 and AP-1000B, roughly 174 hp/130 kW gross) through the C7 ACERT (AP-1000D, about 224 hp/167 kW), a C7.1 or C6.6 ACERT split by emissions market (AP-1000E), and today's C7.1 ACERT Tier 4 Final/Stage IV engine (AP-1000F, about 225 hp/167 kW). Operating weight varies with screed and drive configuration, running from roughly 18,900 kg (41,700 lb) in base trim to about 20,600 kg (45,400 lb) with a wide extending screed and six-wheel drive. Drive has always been hydrostatic, with the propel wheels and the auger/conveyor worktool drives fed off the same hydraulic circuit; configurations range from standard two-wheel drive up through front-wheel-assist and, on later series, optional six-wheel drive for added pull force on grade.
The line's biggest technical break came at the D-series, when the mechanically governed 3116TA gave way to the electronically controlled C7 ACERT, bringing factory diagnostics and emissions aftertreatment into the maintenance picture for the first time. E-series machines then split by destination market between C7.1 (Tier 4 Interim/Stage IIIB) and C6.6 (Tier 3/Stage IIIA) power, before the F-series standardized on the C7.1 ACERT Tier 4 Final/Stage IV engine, added an onboard generator that roughly halves screed heat-up time, and introduced optional six-wheel drive; the F-series remains Caterpillar's current-production large wheel paver as of this writing, with periodic running updates to screed plates and operator-assist features. Because base, B, D, E, and F machines share the same wheel chassis, hopper, auger, conveyor, and general hydrostatic propel-and-worktool architecture, used units across generations remain a strong source of interchangeable chassis and material-handling parts even though engine, emissions, and electrical components are generation-specific - matching the serial prefix and engine tag to the parts request is what keeps a rebuild or repair on the right components.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar AP-1000 specifications
Engine
| AP1000B engine (early generation) | Cat 3116TA, 6-cylinder turbocharged-aftercooled diesel, 130 kW gross (174 hp), 6.6 L displacement (402.8 cu in) |
| AP1000D engine (mid generation) | Cat C7 ACERT, 6-cylinder diesel, 167 kW gross / 166 kW net (224 hp gross / 222.7 hp net), 7.2 L displacement (441 cu in), bore 110 mm x stroke 127 mm (4.33 in x 5.0 in) |
| Current-generation engine (AP1000/AP1000F) | Cat C7.1 ACERT, in-line 6-cylinder 4-stroke diesel, 168 kW gross (225 hp), 7.0 L displacement (428 cu in), bore 105 mm x stroke 135 mm (4.1 in x 5.3 in) |
| Emissions certification | Current-generation C7.1 engine meets U.S. EPA Tier 4 Final / EU Stage IV. Earlier C7 and 3116TA-powered generations predate Tier 4 Final; verify exact certification against the serial/build date |
Weights
| AP1000B operating weight (with screed) | 16,190 kg (35,693 lb) |
| AP1000D operating weight (base configuration) | 14,728 kg (32,470 lb); screed-dependent, listed configurations range higher |
| Current-generation operating weight (with SE60 FM screed) | 19,332 kg (42,620 lb); a commonly cited standard-configuration figure is also given as 18,940 kg (41,755 lb) |
| Current-generation shipping weight | 15,526 kg (34,228 lb) |
| Ground pressure | Not published in available documentation |
Dimensions
| Operating/transport length (with screed) | 6.79-7.24 m (22 ft 3 in - 23 ft 9 in), varies by generation and screed fitted |
| Transport width | 3.05-3.30 m (10 ft - 10 ft 11 in), varies by generation |
| Transport height | 2.77-3.80 m (9 ft 1 in - 12 ft 4 in), varies by generation and canopy/console configuration |
| Wheelbase | 2.56-2.90 m (8 ft 5 in - 9 ft 6 in), varies by generation |
| Inside turn radius (current generation) | 1.50 m (4.5 ft) |
| Ground clearance | Not published in available documentation |
Performance
| Maximum travel speed | 19.3-23.7 km/h (12-14.7 mph), varies by generation |
| Maximum paving speed | 76-114 m/min (250-374 ft/min), varies by generation and screed; drops to about 25 m/min (82 ft/min) when fitted with a tamper bar screed |
| Paving width range (standard to maximum, screed-dependent) | 2.44-7.35 m (8-24.1 ft) typical range; up to about 7.77 m (25 ft 6 in) with the SE60 FM screed |
| Maximum material throughput (current generation, with SE60 FM screed) | about 1,602 t/h (1,766 tons/h) |
| Hopper capacity | about 7.3-13.2 t (8-14.5 tons), varies by generation |
Service capacities (summary)
| Fuel tank | 265-348 L (70.1-92 gal) across generations; one listing for the AP1000D shows a notably higher figure near 446 L (117.9 gal) that does not reconcile with other sources - treat as unconfirmed and verify against the specific machine's data plate |
| Hydraulic system | 189-219 L (50-58 gal), varies by generation |
| Cooling system | 37-45 L (9.8-12 gal), varies by generation |
| DEF tank (Tier 4 Final generation only) | 19.1 L (5 gal) |
| Engine oil | Not published in available documentation - verify with dealer |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
AP-1000 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | approx. 18-26 L (4.8-6.9 US gal), varies by engine and sump - the AP-1000 family spans the 3116TA, 3126/3126B, and C7 ACERT engines across generations, each with its own sump size | Cat DEO or Cat DEO-ULS diesel engine oil. SAE 15W-40 is the standard multigrade; SAE 10W-30 is the preferred grade for this engine family between -18 C (0 F) and 40 C (104 F) ambient. Below -18 C, step to a Cat DEO multigrade or an ECF-1-rated oil in SAE 0W-20, 0W-30, 0W-40, 5W-30, or 5W-40; Cat DEO Cold Weather SAE 0W-40 covers extreme cold. |
| Cooling system | approx. 37 L (9.8 US gal) on the 3116TA-powered generation (AP-1000B); larger-engine generations (C7-powered AP-1000D/E) run a larger radiator and coolant volume - treat as varies by series/configuration | Cat ELC (Extended Life Coolant) premixed 50/50, or Cat DEAC (Diesel Engine Antifreeze/Coolant) where ELC is not used. Follow the standard Cat coolant/antifreeze concentration and extender-cycle schedule for the machine's climate. |
| Fuel tank | varies widely by generation/series: approx. 265 L (70 US gal) on the 3116TA-powered AP-1000B vs. approx. 447 L (118 US gal) on the C7 ACERT AP-1000D - confirm against the data plate/serial-specific OMM for the unit in hand | Ultra-low-sulfur No. 2 diesel fuel (ASTM D975 / EN 590 grade). Use a winterized blend or No. 1 diesel in cold climates per the engine's cold-weather fuel guidance. |
| Hydraulic system and tank | approx. 189 L (50 US gal) on the 3116TA-powered AP-1000B generation; this single hydraulic circuit powers propel (hydrostatic wheel drive), screed, augers, conveyors, and vibrators - there is no separate mechanical transmission or final-drive compartment on this wheel-type paver | Cat HYDO Advanced 10 (SAE 10W) as the primary hydraulic/hydrostatic fluid; Cat HYDO Advanced 20 or 30 in warmer climates; Cat BIO HYDO Advanced where a biodegradable fluid is required. Acceptable second-choice fluids are Cat TDTO, Cat TDTO-TMS, or Cat MTO, provided the oil meets a minimum 900 ppm zinc content. |
| Propel/wheel drive and screed/auger drives | not applicable as separate compartments - propulsion and work-tool drives are hydrostatic/hydraulic-motor driven off the main hydraulic tank above, not through mechanical final drives or axle differentials | n/a - serviced as part of the hydraulic system above |
| Grease points (chassis, pins, screed extensions) | spec only, no fill capacity - lubricate per the maintenance manual's scheduled grease-point interval | Cat Advanced 3Moly Grease (NLGI 2) or Cat Multipurpose Grease (MPGM) for standard-temperature service; select a low-temperature NLGI 1/0 grease for cold-climate operation per the cold-weather guidance. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar AP-1000 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
Servicing the AP-1000 beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S.O.S sampling on engine oil (3116TA, C7, or C7.1 depending on generation) at every oil change, and treat the hydraulic sample as a whole-machine health check since propel and auger/conveyor worktool drives share one circuit - contamination or wear metal there flags both systems at once. Sample auger gearbox oil and coolant on the same rhythm. Track screed heater burner or generator output trends (F-series) to catch heating-element failure before it stalls a paving pass.
Corrective & Common Repairs
Typical AP-1000 repairs center on auger and conveyor drive chain stretch and sprocket wear from abrasive mix, hydrostatic wheel motor and propel wheel bearing leaks, and screed heater burner or heating-element failures that show up as cold spots in the mat. Tamper bar and vibrator screed drive components wear from continuous compaction duty. Hopper wing cylinder seals and screed extension slide rails are common wear-driven leak and drag points on higher-hour machines.
Overhaul & Rebuild Points
Major rebuild targets are the propel pump and wheel motors on the hydrostatic drive, auger gearboxes and drive chain sets (replace as matched sets, not piecemeal), and screed extension slide rails plus moldboard wear strips. Engine overhaul scope depends on generation - 3116TA and C7 units focus on injectors, turbo, and liners, while C7.1 ACERT Tier 4 Final engines add aftertreatment components to the rebuild scope. Reseal hydraulic cylinders on screed lift, extension, and hopper wings together.
Seasonal & Environment Servicing
Cold starts on the 3116TA/C7/C7.1 diesel need fuel treated against gelling and glow/ether-assist systems checked before winter shutdown; screed heat-up time in cold ambient temperatures depends heavily on burner or generator condition, so service that system ahead of the season. In hot-mix summer work, monitor hydraulic oil temperature and viscosity on the shared propel/worktool circuit and clear asphalt buildup from auger and conveyor chains more frequently. Drain fuel/water separators and flush hoppers before extended storage.
AP-1000 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1R-0751 | Filter-Fuel | Fuel system service | Check fitment → |
| 1R-0750 | Filter As-Fuel | Fuel system service | Check fitment → |
| 7W-5389 | Filter Element As-Air | Air intake service | Check fitment → |
| 6I-2499 | Filter Element As-Air | Air intake service | Check fitment → |
| 6I-2500 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
AP-1000 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-01 | Engine Oil Pressure below normal operating range (most severe) - actual low oil pressure condition, not just a sensor fault | Low engine oil level, worn oil pump, plugged oil filter, or oil pressure sensor/wiring fault (shows as 100-03 high voltage or 100-04 low voltage when it's a circuit issue rather than true low pressure) | Shut engine down at once and check oil level and condition on the dipstick; confirm actual pressure against the mechanical gauge before restart; if oil is correct, check the pressure sensor wiring and connector |
| 110-00 | Engine Coolant Temperature above normal operating range | Low coolant level, radiator or screen packed with asphalt dust/debris, fan drive fault, thermostat stuck closed, or coolant temp sensor circuit fault | Stop paving and idle to cool down; check coolant level and clear the radiator/screen of debris; verify fan operation before returning to work |
| 111-17 / 111-18 | Low / Very Low Engine Coolant Level warning | Coolant leak in the system, a failed coolant level sensor, or wiring/ECM fault on the sensor circuit | Inspect the cooling system for leaks and top off with the correct coolant; check the coolant level sensor and connector for damage or corrosion |
| 164-11 | Injection Actuation (Injector Control) Pressure - failure mode not identifiable, generally a low actuation pressure condition on the HEUI fuel system | HEUI pump wear, a failed injection actuation pressure (ICP) sensor, or a stuck/failed actuation pressure control valve | Check engine oil level and condition first (the HEUI system uses engine oil for injector actuation); inspect ICP sensor wiring, then verify actuation pressure control valve operation with the dealer diagnostic tool |
| 168-00 / 168-01 | System (battery) voltage at the ECM above or below normal range | Charging system fault (alternator or regulator), loose or corroded battery connections, or a weak/failing battery | Check battery terminals and ground connections, then test charging voltage at the ECM connector and alternator output |
| 174-03 / 174-04 | Fuel Temperature sensor circuit voltage above or below normal | Open or shorted fuel temperature sensor circuit, connector damage from engine-bay heat and vibration | Inspect the fuel temperature sensor wiring and connector for corrosion or chafing; test sensor resistance against spec and replace if out of range |
| 1-05 | Cylinder No. 1 Injector Solenoid - open circuit (applies the same way to other cylinder injector CIDs) | Open injector harness or connector - a common failure point where the harness passes through the valve cover - or a failed injector solenoid | Inspect the injector harness and connector for oil contamination or chafing damage; swap-test the injector between cylinders to isolate injector versus wiring fault |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
AP-1000 attachments & work tools
Vibratory screeds (SE50/SE60 series)
AP1000 tractors pair with Cat SE50 V, SE50 VT, SE60 V, SE60 V XW and SE60 VT XW vibratory screeds. Paving range spans roughly 2.55-6.5 m (8'4"-21'4") on the SE50 V up to 3.0-10.0 m (9'10"-33') on the SE60 V XW; exact range varies by screed and extender configuration.
Front-mounted extender screeds (FM series)
Newer SE47 FM and SE60 FM screeds mount extenders ahead of the main screed instead of at the rear, letting the operator narrow paving width quickly around obstacles by drawing material back into the auger chamber. SE47 FM covers about 2.4-6.25 m (8'-20'6") and SE60 FM about 3.0-7.8 m (10'-25'6").
Screed wear-plate systems
SDX screed plate system is offered as Textured or Smooth chromium-alloy plates, both quick-change and built for longer abrasion resistance than standard or cladded extended-life plates.
Berm and extension packages
Bolt-on berm-forming attachments and extension packages are available for the SE47 FM and SE60 FM screeds to add paving width or shape shoulder berms.
Grade and slope control
AP1000 supports Cat Grade Control with sonic averaging beams and rigid skis in 9.15 m (30 ft) and 12.2 m (40 ft) lengths, plus sensors for automatic elevation and cross-slope adjustment. The system integrates into both the tractor and screed displays.
Feeder and hopper sensors
Optional sonic feeder sensors monitor asphalt level at the hopper wings to prevent over- or underfilling, and an optional sensor tracks mix temperature at the hopper.
Thermal mat mapping
Optional infrared camera mounted on a fixed mast behind the screed scans the full paving width to map mat surface temperature behind the machine.
Tow-point / leveling-arm linkage
Screed mounts to the tractor through a dedicated tow-point and leveling-arm linkage sized for screed flotation and ride. The Pave Start Assistant option records tow-point position along with paving width and speed for repeatable job setups.
Integrated screed power generation
AP1000 tractor carries an onboard generator that feeds the screed heating system, cutting heat-up time to around 15 minutes; screed heat, vibration, and extender functions draw from this integrated generator and the tractor's hydraulics rather than a separate add-on power kit.
Night lighting kit
120-volt blade light kit plugs into the power-generation panel on current Cat screeds for added visibility during low-light paving.
Hopper flashing and sealing
Updated hopper front flashing and rear wing scrapers reduce mix spillage and leakage into the engine compartment; this is a factory sealing update rather than a bolt-on work tool.
Screed-to-tractor connection
Screeds attach through the tow-point/leveling-arm linkage plus hydraulic and electrical hookups for vibration, heat, and extenders; there is no quick-attach coupler like an excavator uses, so swapping screed types is a service-bay task.
All AP-1000 assemblies by section
Every catalogued assembly group for the Caterpillar AP-1000. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
7r-7586 Air Cleaner Gp
| 06***79 | Adapter | 2 |
| 12***46 | Precleaner Group | 1 |
| 1M***50 | Bowl | 1 |
7c-9756 Air Cleaner Gp
| 2W***57 | Cup As-Air Cleaner | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 6 |
| 7C***56 | Air Cleaner Group | 1 |
6i-2551 Air Cleaner Gp
| 6I***99 | Filter Element As-Air; (Primary) | 1 |
| 6I***00 | Filter Element As-Air; (Secondary) | 1 |
| 6I***51 | Air Cleaner Group | 1 |
7c-5624 Cartridge Gp-Turbocharger
| 1N***06 | Ring-Piston | 1 |
| 7C***24 | Cartridge Group-Turbocharger | 1 |
| 7C***25 | Wheel-Compressor | 1 |
6i-2278 Cartridge Gp-Turbocharger
| 6I***78 | Cartridge Group-Turbocharger | 1 |
100-6916 Cartridge Gp-Turbocharger
| 10***16 | Cartridge Group-Turbocharger | 1 |
1n-4877 Cover Gp-Inlet Manifold
| 1N***77 | Cover Group-Inlet Manifold | 1 |
| 4W***22 | Cover-Inlet Manifold | 1 |
| 6V***19 | Bolt; (M8x1.25x40-mm) | 20 |
7r-3666 Exhaust Gp
| 13***86 | Mount As | 1 |
| 14***57 | Tube-Exhaust | 1 |
| 1W***55 | Clamp | 1 |
7c-3335 Lines Gp-Air
| 6I***65 | Hose | 2 |
| 7C***34 | Tube | 1 |
| 7C***35 | Lines Group-Air | 1 |
126-5914 Lines Gp-Air
| 12***14 | Lines Group-Air | 1 |
| 7C***19 | Hose | 1 |
| 8T***03 | Clamp; (Hose) | 2 |
1w-6029 Lines Gp-Air
| 1W***29 | Lines Group-Air | 1 |
| 7C***07 | Elbow | 1 |
| 7C***19 | Hose | 2 |
7c-2472 Manifold Gp-Exhaust
| 11***00 | Gasket-Manifold | 3 |
| 14***48 | Bolt; (M10x1.5x65-mm)(M10x1.50x65mm) | 12 |
| 15***35 | Lock | 5 |
7w-9248 Manifold Gp-Exhaust
| 10***38 | Manifold-Exhaust | 1 |
| 11***00 | Gasket-Manifold | 3 |
| 14***48 | Bolt; (M10x1.5x65-mm)(M10x1.50x65mm) | 12 |
4w-3480 Manifold Gp-Inlet
| 11***50 | Gasket | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 3 |
| 4W***80 | Manifold Group-Inlet; Inlet Manifold Group | 1 |
4m-0310 Precleaner Gp
| 1M***50 | Bowl | 1 |
| 1S***63 | Bolt (5/16) | 1 |
| 4M***10 | Precleaner As | 1 |
4p-2120 Turbocharger Gp
| 4P***20 | Turbocharger Group | 1 |
| 7C***93 | Gasket-Turbocharger | 1 |
| 9X***20 | Locknut; (M10x1.5-Thd)(M10x1.5-Thd) | 4 |
9y-1053 Turbocharger Gp
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
| 4P***82 | Turbocharger Group | 1 |
| 7C***31 | Gasket-Turbocharger | 1 |
9y-6746 Turbocharger Gp
| 1W***95 | Plate-Identification; (Turbocharger Cartridge) | 1 |
| 7C***24 | Cartridge Group-Turbocharger | 1 |
| 7C***26 | Housing (Compression) | 1 |
108-5768 Turbocharger Gp
| 10***57 | Turbocharger Group | 1 |
| 10***68 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
4p-4682 Turbocharger Gp
| 4P***82 | Turbocharger Group | 1 |
| 6I***78 | Cartridge Group-Turbocharger | 1 |
| 7C***26 | Housing (Compression) | 1 |
4p-4684 Turbocharger Gp
| 1W***95 | Plate-Identification; (Turbocharger Cartridge) | 1 |
| 4P***84 | Turbocharger Group | 1 |
| 6I***78 | Cartridge Group-Turbocharger | 1 |
104-5857 Turbocharger Gp
| 10***16 | Cartridge Group-Turbocharger | 1 |
| 10***57 | Turbocharger Group | 1 |
| 10***77 | Housing | 1 |
Basic Engine
108-5759 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 10***59 | Camshaft Group; (Single) | 1 |
| 13***76 | Camshaft Assem. | 1 |
2w-9608 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 2W***08 | Camshaft Group-Single | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
7c-0299 Cover Gp-Cylinder Block
| 03***81 | Spacer; (9x16x25-mm Thk) | 1 |
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 1U***46 | Sealant (For Locations A) | 0 |
103-0863 Cover Gp-Cylinder Block
| 10***63 | Cover Group-Cylinder Block | 1 |
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 13***40 | Spacer; (9x15x15-mm Thk) | 1 |
7l-0004 Cover Gp-Front Housing
| 10***20 | Cover As-Front | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
4w-2172 Cover Gp-Valve Mechanism
| 11***40 | Gasket; (Valve Cover) | 1 |
| 11***60 | Cover | 1 |
| 4W***72 | Cover Group-Valve Mechanism; Valve Mechanism Cover Group | 1 |
4w-2197 Crankshaft Gp
| 10***30 | Bearing-Main; (Standard) | 3 |
| 10***25 | Crankshaft Assem. | 1 |
| 10***02 | Bearing-Thrust; (Standard) | 1 |
100-4948 Cylinder Block Gp
| 10***48 | Cylinder Block Group | 1 |
| 10***89 | Cylinder Block As | 1 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
7e-2482 Cylinder Block Gp
| 14***03 | Cylinder Block Group | 1 |
| 1W***07 | Sleeve | 2 |
| 4P***51 | Tube As-Piston Cooling | 6 |
2w-9746 Cylinder Block Gp
| 1W***07 | Sleeve | 2 |
| 2W***46 | Cylinder Block Group | 1 |
| 4P***57 | Jet As-Piston Cooling | 6 |
7c-5826 Cylinder Block Gp
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 2W***11 | Bearing-Sleeve; (Camshaft) | 1 |
129-1095 Cylinder Block Gp
| 12***95 | Cylinder Block Group | 1 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
149-5403 Cylinder Block Gp
| 14***02 | Pin, Cylinder Block As | 1 |
| 14***03 | Cylinder Block Group | 1 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
115-4108 Cylinder Head As
| 11***07 | Cylinder Head As | 1 |
| 11***08 | Cylinder Head As | 1 |
| 11***36 | Seal-Valve Stem | 12 |
190-9066 Cylinder Head As
| 11***61 | Sleeve | 6 |
| 16***63 | Insert-Valve Seat; (Inlet) | 6 |
| 19***66 | Cylinder Head As | 1 |
119-3065 Cylinder Head As
| 11***61 | Sleeve | 6 |
| 11***65 | Cylinder Head As | 1 |
| 12***53 | Insert-Valve Seat; (Inlet) | 6 |
115-4107 Cylinder Head As
| 10***10 | Cylinder Head | 1 |
| 11***07 | Cylinder Head As | 1 |
| 11***61 | Sleeve | 6 |
9y-6166 Cylinder Head As
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 3 |
| 1W***13 | Insert-Valve Seat; (Exhaust) | 6 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
115-4165 Cylinder Head Gp
| 11***07 | Cylinder Head As | 1 |
| 11***65 | Cylinder Head Group | 1 |
| 11***36 | Seal-Valve Stem | 12 |
4p-8264 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 3 |
4p-8263 Cylinder Head Gp
| 11***80 | Valve-Inlet | 6 |
| 11***36 | Seal-Valve Stem | 12 |
| 11***65 | Cylinder Head As | 1 |
9y-8850 Cylinder Head Gp
| 10***79 | Valve-Exhaust | 6 |
| 1W***13 | Insert-Valve Seat; (Exhaust) | 6 |
| 1W***15 | Lock-Retainer; (Inlet) | 24 |
9y-8871 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 11***65 | Cylinder Head Group | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
140-7371 Cylinder Head Gp
| 11***36 | Seal-Valve Stem | 12 |
| 13***19 | Valve-Exhaust | 6 |
| 14***71 | Cylinder Head Group | 1 |
159-0305 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
| 14***71 | Cylinder Head Group | 1 |
160-5130 Cylinder Head Gp
| 14***71 | Cylinder Head Group | 1 |
| 16***30 | Cylinder Head Group | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 3 |
7c-2428 Damper & Pulley Gp
| 10***50 | Pulley; (3 Groove) | 1 |
| 20***88 | Damper Assem. | 1 |
| 6V***30 | Bolt; (M10x1.5x60-mm) | 8 |
7c-4532 Drain Gp-Engine Oil
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
| 7C***32 | Drain Group-Oil Pan; Oil Pan Drain Group | 1 |
7c-4566 Drain Gp-Engine Oil
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 7C***66 | Drain Group-Oil Pan; -Magnetic Plug | 1 |
108-5434 Drive Gp-Accessory
| 10***60 | Adapter-Pump | 1 |
| 10***34 | Drive Group-Accessory | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
7c-0044 Drive Gp-Fan
| 4W***03 | Cup-Roller Bearing | 2 |
| 4W***04 | Cone-Roller Bearing | 2 |
| 4W***42 | Spacer; (35.3x45.5x38.331-mm Thk) | 1 |
7r-0106 Drive Gp-Pump
| 07***49 | Shaft-Governor Control | 1 |
| 07***06 | Coupling | 1 |
| 07***77 | Plate As | 1 |
4w-5428 Drive Gp-Water Pump
| 03***75 | V-Belt; (Pump Drive)(Water) | 1 |
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
7c-6998 Drive Gp-Water Pump
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
| 11***38 | Pulley As-Idler | 1 |
7r-7583 Engine Gp
| 03***92 | Seal; (126.59mm Id) | 1 |
| 08***39 | Screw | 1 |
| 08***97 | Support As | 1 |
117-3010 Engine Gp
| 03***92 | Seal; (126.59mm Id) | 1 |
| 08***97 | Support As | 1 |
| 10***60 | Pump Group-Hydraulic | 1 |
9y-2755 Flywheel Gp
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
2w-8475 Gear Gp-Front
| 2W***65 | Shaft-Idler | 1 |
| 2W***66 | Bearing-Sleeve | 1 |
| 2W***75 | Gear Group-Front; Front Gear Group | 1 |
101-4540 Gear Gp-Front
| 10***07 | Shaft-Cam Idler | 1 |
| 10***08 | Plate-Retaining | 1 |
| 10***40 | Gear Group-Front | 1 |
9y-4856 Housing Gp-Flywheel
| 1B***70 | Plug-Pipe; (Drain) | 1 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 1 |
| 2P***94 | Plug-Sealing | 1 |
101-4539 Housing Gp-Front
| 10***39 | Housing Group-Front | 1 |
| 10***11 | Plug | 2 |
| 13***42 | Housing-Front | 1 |
7l-0002 Housing Gp-Front
| 1U***46 | Sealant (For Locations A) | 0 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 4 |
4w-2515 Lifting Gp-Engine
| 4W***82 | Plate-Lifting; (Rear)(Rear) | 1 |
| 4W***83 | Plate-Lifting; (Front) | 1 |
| 4W***15 | Lifting Group | 1 |
7c-2471 Pan Gp-Oil
| 10***23 | Pan-Oil | 1 |
| 11***02 | Gasket-Oil Pan | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
4w-0269 Pan Gp-Oil -Engine
| 11***77 | Pan-Oil | 1 |
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 26***16 | Gasket-Oil Pan; (Engine) | 1 |
7e-1300 Piston & Rod Gp
| 10***87 | Ring-Piston (Top-Chrome) | 1 |
| 2W***27 | Bearing; (Eye End)(Connecting Rod) | 1 |
| 2W***28 | Rod As-Connecting | 1 |
108-5758 Piston & Rod Gp
| 10***63 | Body As-Piston | 1 |
| 10***87 | Ring-Piston (Top-Chrome) | 1 |
| 10***58 | Piston & Rod Group | 1 |
107-7639 Piston & Rod Gp
| 10***45 | Crown As-Piston | 1 |
| 10***39 | Piston & Rod Group; Connecting Rod And Piston Group | 1 |
| 10***87 | Ring-Piston (Top-Chrome) | 1 |
4w-5429 Pulley Gp-Crankshaft
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
| 4W***29 | Pulley Group-Crankshaft; Crankshaft Pulley Group | 1 |
| 7W***73 | Pulley-Crankshaft; (1-Groove) | 1 |
9y-0757 Pulley Gp-Fan Drive
| 7C***90 | Pulley-Fan Drive | 1 |
| 8T***08 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 6 |
| 9Y***57 | Pulley Group-Fan Drive | 1 |
107-7722 Rocker Arm Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 10***91 | Seat-Wear | 1 |
| 10***76 | Rocker Arm As; (Unit Injector) | 1 |
7c-6077 Rocker Arm Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 2Y***29 | Nut-Hard; (M10 X 1.5) | 2 |
| 7C***77 | Rocker Arm Group-Valve | 1 |
4w-1016 Seal Gp-Crankshaft
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
| 4W***16 | Seal Group-Crankshaft | 1 |
| 7C***71 | Seal Group-Crankshaft; (Rear)(Rear) | 1 |
115-4203 Seal Gp-Crankshaft
| 11***03 | Seal Group-Crankshaft | 1 |
| 22***09 | Seal Group-Crankshaft; (Rear) | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
4p-4372 Mechanism Gp-Fuel Pump & Valve
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 2 |
| 3E***12 | Dowel; (Bushing) | 6 |
| 4P***72 | Valve Mechanism Group | 1 |
2w-9607 Valve Mechanism Gp
| 14***47 | Arm As-Lifter | 4 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 2 |
| 2W***07 | Valve Mechanism Group; Fuel Pump And Valve Mechanism Group | 1 |
Braking System
6r-1873 Brake Gp-Parking -Lh
| 5M***62 | Bolt; (3/8-16x0.75-In) | 4 |
| 6R***73 | Brake Group-Parking; -Lh | 1 |
| 6R***74 | Brake Group-Parking; -Lh | 1 |
6r-3897 Brake Gp-Parking -Rh
| 1G***87 | Brake Group-Parking | 1 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 4 |
| 6R***97 | Brake Group-Parking; -Rh | 1 |
1g-6487 Brake Gp-Parking
| 03***46 | Bearing | 1 |
| 07***17 | Switch, Neutral Start; (Secondary Brake/Neutral Pump) | 2 |
| 12***35 | Washer | 1 |
6r-1874 Brake Gp-Parking -Lh
| 03***46 | Bearing | 1 |
| 07***17 | Switch, Neutral Start; (Secondary Brake/Neutral Pump) | 2 |
| 3B***17 | Pin,Cotter Governor And Decelerator Control | 1 |
7x-2249 Valve Gp-Brake Control
| 08***80 | Case As | 1 |
| 08***83 | Body | 1 |
| 08***84 | Coil | 1 |
5e-9150 Valve Gp-Brake Control
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 3 |
| 5E***50 | Valve Group; (2 Stack Brake Control) | 1 |
Controls
1g-9367 Control Gp-Thickness
| 1G***65 | Film-Instruction | 2 |
| 1G***66 | Shaft | 2 |
| 1G***67 | Control Group-Thickness | 1 |
124-9996 Control Gp-Thickness
| 12***96 | Control Group-Thickness | 1 |
| 12***56 | Support-Control Box | 2 |
| 1G***27 | Cover Group-Extension | 1 |
6r-3041 Crown Ar-Power
| 6R***40 | Lines Group-Screed; Lines Gp-Crown | 1 |
| 6R***41 | Crown Ar-Power | 1 |
| 6R***45 | Crown Group-Power; Crown Gp-Screed-Power | 1 |
6r-3234 Crown Ar-Power
| 6R***45 | Crown Group-Power; Crown Gp-Screed-Power | 1 |
| 6R***47 | Lines Group-Screed; Lines Gp-Crown | 1 |
| 6R***34 | Crown Ar-Power | 1 |
6r-3045 Crown Gp-Power
| 07***81 | Motor Group-Hydraulic; S/N 6ad1-264 | 1 |
| 1G***22 | Valve-Block | 1 |
| 1G***23 | Plate | 1 |
185-4044 Jack Gp-Height Adjuster
| 18***65 | Jack Group-Height Adjuster | 1 |
| 18***44 | Jack Group-Height Adjuster | 1 |
| 1F***50 | Nut Rops Support | 1 |
Cooling System
1g-9385 Adapter Gp-Fan
| 1G***84 | Adapter-Fan | 1 |
| 1G***85 | Adapter Group-Fan | 1 |
| 1G***23 | Fan-Suction | 1 |
7c-5467 Adapter Gp-Fan
| 6I***37 | Adapter; (Fan) | 1 |
| 7C***67 | Adapter Group-Fan | 1 |
| 8T***77 | Bolt-Plt; (M8 X 1.25 X 90) | 6 |
100-6269 Cooler Gp-Engine Oil
| 10***69 | Cooler Group-Engine Oil | 1 |
| 23***55 | Gasket | 1 |
| 26***43 | Core As-Engine Oil Cooler | 1 |
4w-2913 Cooler Gp-Engine Oil
| 23***54 | Gasket | 1 |
| 23***55 | Gasket | 1 |
| 24***64 | Spring; (Yoke) | 1 |
7c-9048 Lines Gp-Water
| 12***47 | Housing-Water Regulating | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 12***71 | Clamp-Hose | 2 |
7c-4508 Pump Gp-Water
| 15***37 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
7c-6438 Pump Gp-Water
| 15***42 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
7c-7030 Pump Gp-Water
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
| 4J***24 | Seal 46.99 mm(1.85 In.) I.D. | 1 |
| 7C***38 | Pump Group-Water | 1 |
159-3142 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 15***42 | Pump Group-Water | 1 |
4w-7589 Pump Gp-Water
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
| 4J***24 | Seal 46.99 mm(1.85 In.) I.D. | 1 |
| 4W***89 | Pump Group-Water | 1 |
159-3137 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 15***37 | Pump Group-Water | 1 |
7r-7585 Radiator & Hyd Oil Cooler Gp
| 08***80 | Support As | 1 |
| 08***82 | Hose As | 1 |
| 1G***43 | Pad | 2 |
Electrical And Starting System
6r-0070 Alternator Gp-Charging
| 1G***36 | Bracket As | 1 |
| 3E***27 | Alternator Group-Charging | 1 |
| 6R***70 | Alternator Group-Charging | 1 |
9x-6796 Alternator Gp-Charging
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
| 2K***21 | Locknut (5/8-18 Thd) | 1 |
| 3E***46 | Connector | 1 |
7e-8448 Alternator Gp-Charging
| 7C***57 | Strap | 1 |
| 7E***46 | Bracket | 1 |
| 7E***48 | Alternator Group-Charging | 1 |
121-4135 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 3 |
| 10***84 | Rectifier As-Alternator | 1 |
| 10***86 | Stator As-Alternator | 1 |
3e-8827 Alternator Gp-Charging
| 10***83 | Rotor As-Alternator | 1 |
| 10***84 | Rectifier As-Alternator | 1 |
| 10***86 | Stator As-Alternator | 1 |
6r-0404 Battery Gp
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 0 |
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 03***17 | Tread-Nonskid | 1 |
7r-9745 Box Gp-Control
| 08***41 | Switch As-Toggle; (Lh Feeder Auto/Manual Control) | 1 |
| 08***35 | Decal | 1 |
| 08***53 | Spacer | 1 |
7r-9746 Box Gp-Control
| 08***41 | Switch As-Toggle; (Lh Feeder Auto/Manual Control) | 1 |
| 08***35 | Decal | 1 |
| 08***53 | Spacer | 1 |
6r-0402 Box Gp-Junction
| 5M***62 | Bolt; (3/8-16x0.75-In) | 6 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 4 |
| 6R***68 | Box Group-Junction | 1 |
113-8503 Box Gp-Junction
| 03***14 | Screw; (10-32x1-In) | 2 |
| 03***15 | Screw-Machine; (6-32x1.5-In) | 4 |
| 06***08 | Locknut; (1-11-1/4-Thd) | 1 |
114-2393 Box Gp-Junction
| 11***03 | Box Group-Junction | 1 |
| 11***93 | Box Group-Junction | 1 |
| 4B***78 | Washer Current Transformer Bracket Mounting | 4 |
6r-0268 Box Gp-Junction
| 03***14 | Screw; (10-32x1-In) | 2 |
| 06***08 | Locknut; (1-11-1/4-Thd) | 1 |
| 08***11 | Locknut | 1 |
6r-0699 Control Gp-Conv/Auger Pump Dr
| 10***37 | Gasket | 1 |
| 10***38 | Cover | 1 |
| 3K***68 | Bolt-Socket Head; (10-32x0.625-In) | 4 |
7r-4985 Electrical Ar
| 11***24 | Sensor Group-Steering | 1 |
| 6R***02 | Box Group-Junction | 1 |
| 6R***04 | Battery Group | 1 |
111-1294 Electrical Ar
| 11***94 | Electrical Ar | 1 |
| 11***67 | Wiring Group-Console | 1 |
| 11***92 | Wiring Group-Hydraulic Control | 1 |
1g-6006 Installation Gp-Controls
| 1G***06 | Installation Group-Controls | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 2 |
| 6R***50 | Wire As | 1 |
1g-6005 Installation Gp-Controls
| 1G***05 | Installation Group-Controls | 1 |
| 1G***39 | Film-Notice | 2 |
| 2N***74 | Screw; (6-32x0.375-In) | 4 |
7t-0618 Lighting Gp-Warning Beacon
| 06***99 | Lamp | 2 |
| 2L***77 | Terminal; (14-Ga To 16-Ga, 1/4-In Screw)(14-16 Gage, 6.4mm Screw) | 1 |
| 4B***24 | Screw-Machine; (8-32x1.5-In) | 1 |
9x-7779 Lamp Gp-Flood -Roading Lights
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
| 10***53 | Lens As; (Floodlight) | 1 |
6r-2448 Lamp Gp-Warning Beacon
| 09***08 | Strap | 2 |
| 11***74 | Wire As | 1 |
| 3P***14 | Grommet | 2 |
6r-2447 Lighting Gp-Flood
| 2N***75 | Screw; (6-32x0.5-In) | 2 |
| 3P***14 | Grommet | 4 |
| 3T***62 | Circuit Breaker As; (15-Ampere)(Auto Start/Stop Control) | 1 |
6r-0106 Panel Gp-Control -Lh
| 07***01 | Switch; (Glow Plug-Main Burner Rh) | 3 |
| 08***41 | Switch; (Machine/Engine Remote Stop) | 1 |
| 08***71 | Knob; (Red) | 1 |
111-4684 Panel Gp-Control -Lh
| 07***01 | Switch; (Glow Plug-Main Burner Rh) | 3 |
| 10***90 | Switch As; (Travel/Pave) | 1 |
| 11***84 | Panel Group-Control; -Lh | 1 |
6r-0105 Panel Gp-Control -Rh
| 07***01 | Switch; (Glow Plug-Main Burner Rh) | 3 |
| 08***41 | Switch; (Machine/Engine Remote Stop) | 1 |
| 08***71 | Knob; (Red) | 1 |
111-4683 Panel Gp-Control -Rh
| 07***01 | Switch; (Glow Plug-Main Burner Rh) | 3 |
| 10***90 | Switch As; (Travel/Pave) | 1 |
| 11***83 | Panel Group-Control; -Rh | 1 |
5e-9363 Sensor Gp-Feeder
| 3H***94 | Setscrew-Socket | 2 |
| 5E***63 | Sensor As | 1 |
| 5E***86 | Screw | 4 |
8i-0864 Sensor Gp-Feeder
| 1G***19 | Knob | 2 |
| 3B***10 | Cotter-To Inspection Door | 2 |
| 5E***63 | Sensor As | 2 |
7r-5385 Sensor Gp-Feeder
| 1G***16 | Support As | 2 |
| 1G***19 | Knob | 2 |
| 3B***10 | Cotter-To Inspection Door | 2 |
116-2803 Sensor Gp-Steering
| 03***49 | Nut-Self Lock; (No.10.Unc) | 4 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
| 11***91 | Enclosure-Mod | 1 |
6r-0802 Sensor Gp-Steering
| 03***46 | Bearing | 1 |
| 11***83 | Enclosure-Mod | 1 |
| 1F***75 | Washer | 1 |
123-9242 Sensor Gp-Steering
| 11***33 | Bracket-Sensor | 1 |
| 11***03 | Sensor Group-Steering | 1 |
| 11***25 | Angle-Tie Rod | 1 |
116-5324 Sensor Gp-Steering
| 11***33 | Bracket-Sensor | 1 |
| 11***03 | Sensor Group-Steering | 1 |
| 11***24 | Sensor Group-Steering | 1 |
6r-0801 Sensor Gp-Steering
| 11***33 | Bracket-Sensor | 1 |
| 4B***47 | Nut,Plain,Square Circuit Breaker Uoc:Bsv,Bsx | 4 |
| 4B***49 | Nut-Valve To Bracket; 3.18mm(.125in)Thk | 2 |
9y-0545 Solenoid Gp-Shutoff
| 12***71 | Solenoid As; (Fuel Shutoff) | 1 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 1 |
| 6V***77 | Nut (8-32 Thd) | 2 |
100-3157 Starting Aid Gp
| 10***57 | Starting Aid Group; (Heater) | 1 |
| 10***58 | Cover-Inlet Manifold | 1 |
| 10***62 | Elbow | 1 |
144-0339 Starting Aid Gp
| 10***58 | Cover-Inlet Manifold | 1 |
| 10***62 | Elbow | 1 |
| 12***42 | Gasket | 2 |
3e-5382 Starting Motor Gp-Electric
| 2P***04 | Bearing | 1 |
| 3E***53 | Cover-Starting Motor | 1 |
| 3E***54 | Bushing-Starting Motor | 1 |
7w-8759 Starting Motor Gp-Electric
| 10***08 | Bolt (M10x1.5x35mm); (M10x1.5x35-mm) | 3 |
| 3E***82 | Starting Motor Group-Electric | 1 |
| 3K***57 | Gasket | 1 |
121-1323 Switch Gp-Screed
| 11***10 | Film-Instruction | 2 |
| 12***18 | Wire As | 1 |
| 12***19 | Wire As | 1 |
8c-9685 Switch Gp-Rocker
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 6V***74 | Screw-Machine (6-32x0.25in); (6-32x0.25-In) | 3 |
| 8C***85 | Switch Group-Rocker | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
126-3655 Wiring Gp-Console
| 12***18 | Wire As | 1 |
| 12***19 | Wire As | 1 |
| 12***20 | Wire As | 1 |
116-3202 Wiring Gp-Console
| 11***97 | Wire As | 1 |
| 11***98 | Wire As | 1 |
| 11***99 | Wire As | 1 |
113-5767 Wiring Gp-Console
| 11***83 | Panel Group-Control; -Rh | 1 |
| 11***84 | Panel Group-Control; -Lh | 1 |
| 11***66 | Harness As | 1 |
7r-4984 Wiring Gp-Console
| 2R***04 | Nut-Self Lock; (5/16unc) | 2 |
| 2Y***20 | Screw; (1/4-20x0.75-In)(Machine) | 24 |
| 3J***18 | Lockwasher, Shakeproof - 1/2 | 8 |
6r-0407 Wiring Gp-Engine
| 00***33 | Tee-Pipe | 1 |
| 03***10 | Sender As-Pressure; (Oil Pressure) | 1 |
| 03***18 | Screw-Machine | 4 |
114-2392 Wiring Gp-Hydraulic Control
| 07***84 | Clamp | 1 |
| 11***98 | Harness As | 1 |
| 11***92 | Wiring Group-Hydraulic Control | 1 |
6r-0406 Wiring Gp-Hydraulic Control
| 07***84 | Clamp | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 2H***88 | Nut Bracket To Plate To Bracket | 4 |
8i-0515 Wiring Gp-Screed
| 03***50 | Locknut, Hex., 1/4in.-20 N.C. | 6 |
| 12***74 | Clip-Loop; (12.7mm Id) | 2 |
| 1G***42 | Wire As | 4 |
6r-3235 Wiring Gp-Screed
| 06***08 | Locknut; (1-11-1/4-Thd) | 1 |
| 09***10 | Clamp | 1 |
| 1H***93 | Lockwasher (External Tooth) | 1 |
6r-0408 Wiring Gp-Screed
| 03***12 | Screw-Forming; (10-24x0.5-In) | 2 |
| 03***18 | Screw-Machine | 32 |
| 07***84 | Clamp | 2 |
Electrical System
6r-3338 Box Gp-Screed Control
| 1S***93 | Strap; (Cable) (0.62in Dia) | 3 |
| 3E***15 | Plate-Instruction | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
7r-9825 Control Gp-Burner
| 07***01 | Switch; (Glow Plug-Main Burner Rh) | 4 |
| 08***10 | Connector | 2 |
| 08***11 | Locknut | 2 |
7r-7656 Control Gp-Burner
| 08***41 | Switch As-Toggle; (Lh Feeder Auto/Manual Control) | 1 |
| 08***35 | Decal | 1 |
| 08***53 | Spacer | 1 |
6r-0275 Control Gp-Burner
| 08***41 | Switch As-Toggle; (Lh Feeder Auto/Manual Control) | 1 |
| 08***35 | Decal | 1 |
| 08***53 | Spacer | 1 |
Engine Arrangement
133-4249 Engine Ar
| 10***69 | Cooler Group-Engine Oil | 1 |
| 10***39 | Housing Group-Front | 1 |
| 10***40 | Gear Group-Front | 1 |
112-1684 Engine Ar
| 10***32 | Pump Group-Fuel Injection | 6 |
| 10***58 | Piston & Rod Group | 6 |
| 11***84 | Engine Ar | 1 |
7c-9226 Engine Ar
| 1N***76 | Filter Group-Fuel | 1 |
| 1N***77 | Breather Group; Breather Group | 1 |
| 1N***77 | Cover Group-Inlet Manifold | 1 |
7r-7111 Engine Ar
| 7R***66 | Exhaust Group | 1 |
| 7R***10 | Tank & Pump Group-Fuel | 1 |
| 7R***11 | Engine Ar | 1 |
9e-2199 Engine Ar
| 1W***29 | Lines Group-Air | 1 |
| 1W***30 | Lines Group-Turbocharger Oil | 1 |
| 4W***69 | Pan Group-Oil; -Engine | 1 |
Feeder Drag And Auger Conveyors
8t-7485 Actuator Gp-Power
| 7R***68 | Cover | 1 |
| 7R***69 | Motor | 1 |
| 7R***70 | Clamp | 1 |
086-9567 Auger Ar-Modular
| 08***62 | Auger Group-Modular | 1 |
| 08***67 | Auger Ar-Modular | 1 |
| 08***69 | Drive Group-Conveyor | 1 |
7r-3920 Auger Gp
| 06***64 | Bolt | 12 |
| 07***87 | Ring-Retaining | 2 |
| 09***99 | Fitting-Grease; (Hydraulic) | 2 |
086-9462 Auger Gp-Modular
| 07***87 | Ring-Retaining | 2 |
| 08***67 | Bearing Group-Auger | 2 |
| 08***62 | Auger Group-Modular | 1 |
086-8867 Bearing Gp-Auger
| 08***67 | Bearing Group-Auger | 1 |
| 0A***91 | Screw | 2 |
| 7R***15 | Bearing; (Insert) | 1 |
6r-0330 Bearing Gp-Auger
| 0A***91 | Screw | 2 |
| 6R***30 | Bearing Group-Auger | 1 |
| 7R***15 | Bearing; (Insert) | 1 |
108-1296 Chain Gp-Conveyor
| 10***96 | Chain Group-Conveyor | 1 |
| 5E***38 | Pin-Cotter | 238 |
| 5E***39 | Pin | 238 |
7r-2985 Chain Gp-Conveyor
| 05***20 | Pin-Spring | 40 |
| 10***96 | Chain Group-Conveyor | 1 |
| 7R***85 | Chain Group-Conveyor | 1 |
7r-9863 Conveyor Ar-Drag & Auger
| 08***06 | . Ring; Back-Up, Lines Group-Lubrication | 1 |
| 6R***16 | Door Group | 2 |
| 6R***32 | Lines Group-Auger | 1 |
7r-7836 Conveyor Ar-Drag & Auger
| 6R***25 | Conveyor Group-Drag | 1 |
| 7R***85 | Sensor Group-Feeder | 1 |
| 7R***36 | Conveyor Ar-Drag & Auger | 1 |
6r-1625 Conveyor Gp-Drag
| 08***03 | Plate As | 1 |
| 11***00 | Plate; (Front) | 2 |
| 11***01 | Plate; (Rear) | 2 |
111-1296 Conveyor Gp-Drag
| 10***84 | Screw-Flat Head; (1/2-13x1.5-In)(22.22x7.94x1/2-13 Thd) | 24 |
| 11***96 | Conveyor Group-Drag | 1 |
| 11***64 | Guard As-Side; (Rh Front & Lh Rear) | 1 |
6r-0316 Door Gp
| 08***98 | Door; (Rear) | 1 |
| 4B***47 | Nut,Plain,Square Circuit Breaker Uoc:Bsv,Bsx | 2 |
| 6R***16 | Door Group | 1 |
6r-1285 Door Gp-Access
| 4B***47 | Nut,Plain,Square Circuit Breaker Uoc:Bsv,Bsx | 2 |
| 6R***85 | Door Group-Access | 1 |
| 6V***83 | Latch; (Spring) | 1 |
6r-1286 Door Gp-Access
| 4B***47 | Nut,Plain,Square Circuit Breaker Uoc:Bsv,Bsx | 2 |
| 6R***86 | Door Group-Access | 1 |
| 6V***83 | Latch; (Spring) | 1 |
7r-2970 Drive Gp-Conveyor
| 11***12 | Sprocket As; (23/10 Teeth) | 1 |
| 7J***80 | Ring-Retaining | 2 |
| 7R***70 | Drive Group-Conveyor | 1 |
7r-4397 Drive Gp-Conveyor
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 20 |
| 03***73 | Bolt; (3/8-16x1.5-In) | 24 |
| 08***51 | Plate; (Inspection) | 2 |
086-9569 Drive Gp-Conveyor
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 12 |
| 08***69 | Drive Group-Conveyor | 1 |
| 08***48 | Motor As-Hydraulic | 2 |
1g-9347 Extension Gp-Auger -6 In
| 1G***47 | Extension Group-Auger; -6 In | 1 |
| 1G***48 | Tube | 2 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 2 |
5e-9809 Extension Gp-Auger -1-Ft, Rh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 5E***09 | Extension Group-Auger; -1-Ft, Rh | 1 |
5e-9808 Extension Gp-Auger -1-Ft, Lh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 5E***08 | Extension Group-Auger; -1-Ft, Lh | 1 |
5e-9826 Extension Gp-Auger -2-Ft, Rh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 5E***26 | Extension Group-Auger; -2-Ft, Rh | 1 |
5e-9825 Extension Gp-Auger -2-Ft, Lh
| 08***53 | Shaft-Governor Control | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 5E***25 | Extension Group-Auger; -2-Ft, Lh | 1 |
110-0990 Gate Gp-Flow
| 11***90 | Gate Group-Flow | 1 |
| 1H***00 | Pin--To Compression Release Shaft | 1 |
| 6S***46 | Pin (Locking) | 2 |
6r-2446 Gate Gp-Flow -Power
| 08***81 | Coupling | 2 |
| 1G***80 | Adapter As | 1 |
| 1G***81 | Tube | 1 |
8c-8160 Drive Gp-Conveyor
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 08***43 | Gear-Cluster | 3 |
087-1806 Lines Gp-Lubrication
| 08***06 | . Ring; Back-Up, Lines Group-Lubrication | 1 |
| 09***99 | Fitting-Grease; (Hydraulic) | 2 |
| 2P***79 | Locknut- Tube Assembly To Upper Frame | 2 |
087-1455 Lines Gp-Lubrication
| 08***36 | Hose As | 2 |
| 08***55 | Lines Group-Lubrication | 1 |
| 08***08 | Hose As | 4 |
7r-2971 Takeup Gp-Conveyor
| 11***77 | Collar-Set | 2 |
| 12***30 | Sprocket | 2 |
| 1D***06 | Nut 13.89 mm (.546 In.) | 2 |
Frame And Body
7r-0330 Arm Gp-Tow
| 08***25 | Spacer | 2 |
| 08***89 | Pin-Cotter | 4 |
| 1G***55 | Cylinder As-Hydraulic | 2 |
5e-9462 Brace Gp
| 06***27 | Pin | 1 |
| 10***97 | Bracket | 1 |
| 2G***13 | Pin | 1 |
6r-1185 Cover Gp-Engine & Platform
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 8 |
| 03***72 | Bolt; (3/8-16-Thd) | 10 |
| 08***97 | Plate As; (Rh) | 1 |
1g-6327 Cover Gp-Screed
| 1G***70 | Screw | 4 |
| 1G***27 | Cover Group-Extension | 1 |
| 1G***28 | Cover As-Rh | 1 |
111-2141 Frame As
| 11***41 | Frame As | 1 |
1g-7070 Frame As
| 1G***70 | Frame As | 1 |
6r-3378 Frame Gp-Screed
| 01***70 | Setscrew | 4 |
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 6 |
| 03***10 | Bolt | 6 |
6r-0528 Gate Gp-End
| 1G***66 | Gate As-Fixed End | 1 |
| 5P***28 | Capscrew; (Hex Hd) (1/2-13 Unc X 1.00, Gd 8 Z) | 4 |
| 6R***28 | Gate As-End-Lh | 1 |
6r-0549 Gate Gp-End
| 1G***67 | Gate As-Fixed End | 1 |
| 5P***28 | Capscrew; (Hex Hd) (1/2-13 Unc X 1.00, Gd 8 Z) | 4 |
| 6R***49 | Gate As-End-Rh | 1 |
087-0648 Guide Gp-Steering
| 08***48 | Guide Group-Steering | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 4 |
104-6579 Guide Gp-Steering
| 03***74 | Keeper | 1 |
| 10***79 | Guide Group-Steering | 1 |
| 10***39 | Tube As | 1 |
111-2146 Hopper Gp
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 08***23 | Nut-Jam | 2 |
| 10***49 | Pin As | 2 |
6r-2158 Hopper Gp
| 02***87 | Fitting-Grease; (Universal Joint) | 8 |
| 08***23 | Nut-Jam | 4 |
| 1D***91 | Bolt-Carriage; (1/2-13x2.5-In) | 14 |
111-0555 Link Gp-Steering
| 06***15 | Nut; (1-1/4-12-Thd) | 7 |
| 08***07 | Bolt | 4 |
| 08***50 | Idler As; (Steering) | 1 |
111-0557 Link Gp-Steering -Lh
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
| 08***06 | Bolt | 1 |
| 08***07 | Bolt | 1 |
6r-0199 Link Gp-Steering
| 08***07 | Bolt | 4 |
| 08***29 | Rod As; (Steering) | 2 |
| 08***50 | Idler As; (Steering) | 1 |
111-0556 Link Gp-Steering
| 06***15 | Nut; (1-1/4-12-Thd) | 1 |
| 08***07 | Bolt | 2 |
| 11***56 | Link Group-Steering | 1 |
6r-0198 Link Gp-Steering -Lh
| 08***06 | Bolt | 1 |
| 08***07 | Bolt | 1 |
| 1A***68 | Nut | 2 |
6r-0197 Link Gp-Steering -Rh
| 08***07 | Bolt | 2 |
| 1A***68 | Nut | 2 |
| 1K***59 | Nut; (1-8-Thd) | 2 |
1g-6290 Strike-Off Gp-Screed -Rh
| 14***04 | Cap-End | 1 |
| 1B***06 | Nut--Air Chamber Mounting; Nut- Air Chamber Assembly | 1 |
| 1G***90 | Strike-Off Group; -Rh | 1 |
1g-6289 Strike-Off Gp-Screed
| 14***04 | Cap-End | 1 |
| 1B***06 | Nut--Air Chamber Mounting; Nut- Air Chamber Assembly | 1 |
| 1G***89 | Strike-Off Group-Lh | 1 |
1g-6288 Structural Gp
| 1G***88 | Structural Group; Structural Gp-Extension-3 X 3 | 1 |
| 1G***89 | Strike-Off Group-Lh | 1 |
| 1G***90 | Strike-Off Group; -Rh | 1 |
7r-0341 Support Gp-Tow Arm
| 2H***88 | Nut Bracket To Plate To Bracket | 2 |
| 2H***90 | Nut; (3/4-10-Thd) | 1 |
| 3B***18 | Cotter Pin (.125" Dia.) | 6 |
Fuel System
7r-3022 Burner Gp
| 03***49 | Nut-Self Lock; (No.10.Unc) | 1 |
| 03***99 | Nut-Wing; (1/4-20-Thd) | 1 |
| 08***66 | Mount-Flexible | 4 |
087-1457 Burner Gp
| 03***49 | Nut-Self Lock; (No.10.Unc) | 1 |
| 08***66 | Mount-Flexible | 4 |
| 08***57 | Burner Group-Lh | 1 |
087-1458 Burner Gp
| 03***49 | Nut-Self Lock; (No.10.Unc) | 1 |
| 08***66 | Mount-Flexible | 4 |
| 08***58 | Burner Group-Rh | 1 |
7r-3023 Burner Gp
| 03***49 | Nut-Self Lock; (No.10.Unc) | 1 |
| 08***66 | Mount-Flexible | 4 |
| 08***78 | Plate | 1 |
105-1695 Control Gp-Fuel Injection
| 10***95 | Control Group-Fuel Injection | 1 |
| 16***56 | Control Group-Fuel Injection | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 4 |
7w-6989 Control Gp-Fuel Injection
| 16***56 | Control Group-Fuel Injection | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 4 |
| 7W***89 | Control Group-Fuel Injection; Fuel Injection Control Group | 1 |
7e-9429 Control Gp-Governor
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 1 |
| 6I***82 | Lever As | 1 |
| 6I***83 | Spring | 2 |
4p-4775 Drive Gp-Gov & Transfer Pump
| 2K***30 | Bearing As-Needle | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
| 4D***86 | Seal--Bushing To Selector Valve Group | 2 |
4p-0666 Drive Gp-Gov & Transfer Pump
| 2K***30 | Bearing As-Needle | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
| 4D***86 | Seal--Bushing To Selector Valve Group | 2 |
7e-8794 Drive Gp-Gov & Transfer Pump
| 10***68 | Gear As-Drive; (44-Teeth), . Body | 1 |
| 10***85 | Lever-Shutoff; (Output) | 1 |
| 1W***65 | Ring-Retaining | 1 |
6i-0232 Drive Gp-Gov & Transfer Pump
| 2K***30 | Bearing As-Needle | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
| 4D***86 | Seal--Bushing To Selector Valve Group | 2 |
7w-4812 Fastener Gp-Fuel Inj Pump
| 1T***68 | Seal-O-Ring; (Fuel Injection Pump) | 1 |
| 6F***73 | Seal--To Top Cover On Selector Valve | 1 |
| 6V***18 | Bolt (M8x1.25x45mm); (M8x1.25x35-mm) | 3 |
6i-2946 Filter & Lines Gp-Fuel
| 00***72 | Clip (" " " ) | 2 |
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
6i-2693 Filter Gp-Fuel
| 1R***51 | Filter-Fuel; (Advanced Efficiency)(High Efficiency) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6I***93 | Filter Group-Fuel; Fuel Filter Group (2z F3772-Up) | 1 |
1n-3476 Filter Gp-Fuel
| 1N***76 | Filter Group-Fuel | 1 |
| 1R***50 | Filter As-Fuel; (Advanced Efficiency)(Secondary) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
9y-0283 Fitting Gp-Fuel Lines
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
| 5P***24 | Elbow-90 Degree | 2 |
| 9Y***83 | Fitting Group-Fuel Lines | 1 |
087-0490 Fuel Gp-Screed
| 08***87 | Manifold; (Diesel) | 1 |
| 08***79 | Hose As | 2 |
| 08***80 | Hose As | 2 |
115-2544 Governor Gp
| 10***91 | Spring-Oil Side | 1 |
| 11***44 | Governor Group | 1 |
| 11***47 | Cam Assem. | 1 |
100-6179 Governor Gp-Unit Injector
| 10***79 | Governor Group-Unit Injector | 1 |
| 10***12 | Clevis | 1 |
| 10***13 | Piston-Servo | 1 |
4p-5512 Governor Gp-Unit Injector
| 4P***58 | Spring-Low Idle | 1 |
| 4P***74 | Cam-Torque | 1 |
| 4P***66 | Spring-High Idle | 1 |
4p-1694 Governor Gp-Unit Injector
| 4P***94 | Governor Group-Unit Injector | 1 |
| 7W***12 | Fastener Group-Governor; Fastener Group(Governor) (~1c K5811) | 1 |
| 7W***34 | Lines Group-Governor Oil; Governor Oil Lines Group | 1 |
9y-2678 Governor Gp-Unit Injector
| 4P***81 | Governor Group-Unit Injector | 1 |
| 4P***05 | Spring Group-Governor | 1 |
| 7C***89 | Plug-Orifice | 1 |
4p-5503 Governor Gp-Unit Injector
| 2S***16 | Dowel; 44.45mm(1.75in.)Lg. | 2 |
| 3P***47 | Ring-Retaining | 1 |
| 3T***49 | Bolt-Socket Hd; (M6 X 1.0 X 25) | 6 |
6i-0231 Governor Gp-Unit Injector
| 2S***16 | Dowel; 44.45mm(1.75in.)Lg. | 2 |
| 3P***47 | Ring-Retaining | 1 |
| 3T***49 | Bolt-Socket Hd; (M6 X 1.0 X 25) | 6 |
131-4852 Governor Gp-Unit Injector
| 10***12 | Clevis | 1 |
| 10***13 | Piston-Servo | 1 |
| 10***87 | Ring-Tolerance | 1 |
4p-1581 Governor Gp-Unit Injector
| 2S***16 | Dowel; 44.45mm(1.75in.)Lg. | 2 |
| 3C***70 | Nut; (M5x0.8-Thd) | 3 |
| 3P***47 | Ring-Retaining | 1 |
133-3062 Governor Gp-Unit Injector
| 10***90 | Spring-Air Side | 1 |
| 10***92 | Spring-Servo | 1 |
| 10***93 | Spring-Return | 1 |
113-6219 Governor Gp-Unit Injector
| 11***19 | Governor Group-Unit Injector; (Unit Injector) | 1 |
| 11***44 | Governor Group | 1 |
| 13***16 | Lines Group-Governor Oil | 1 |
7e-3660 Governor Gp-Unit Injector
| 4P***58 | Spring-Low Idle | 1 |
| 4P***66 | Spring-High Idle | 1 |
| 4P***67 | Spring Group-Governor | 1 |
4p-4778 Governor Gp-Unit Injector
| 2S***16 | Dowel; 44.45mm(1.75in.)Lg. | 2 |
| 3C***70 | Nut; (M5x0.8-Thd) | 3 |
| 3P***47 | Ring-Retaining | 1 |
7e-7661 Governor Gp-Unit Injector
| 4P***12 | Governor Group-Unit Injector | 1 |
| 7E***60 | Governor Group-Unit Injector | 1 |
| 7E***61 | Governor Group-Unit Injector | 1 |
6r-0115 Lines Gp-Fuel
| 00***47 | Elbow; (Rh Side) | 1 |
| 07***84 | Clamp | 3 |
| 08***71 | Hose As | 1 |
7c-9651 Lines Gp-Fuel Filter
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 7 |
| 3N***52 | Spring (0.406in Od) | 1 |
| 5F***54 | Seal--To Seal Suction Tube To Pump (Pump End Only) | 1 |
6i-2420 Lines Gp-Fuel Filter
| 06***26 | Cap-Tube | 1 |
| 11***84 | Tee-O-Ring Port | 1 |
| 11***33 | Tube As | 1 |
107-7731 Lines Gp-Fuel Ratio Control
| 10***80 | Tube Assem. | 1 |
| 10***31 | Lines Group-Fuel Ratio Control; Air Fuel Ratio Control Lines Group, Angle | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
135-1716 Lines Gp-Governor Oil
| 13***16 | Lines Group-Governor Oil | 1 |
| 13***57 | Tube Assem. | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
7w-8434 Lines Gp-Governor Oil
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 2 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 2 |
| 6V***28 | Elbow-Face Seal (For 6.35mm Od Tube) | 1 |
6r-0080 Pump Gp-Fuel
| 08***68 | Spacer | 1 |
| 4M***61 | Bolt-To Assemble Valve As And Plates | 4 |
| 5E***17 | Motor Group-Electric; (12-Volt Dc) | 1 |
1g-7988 Pump Gp-Fuel
| 10***60 | Plug | 1 |
| 1G***88 | Pump Group-Fuel | 1 |
| 5E***40 | Plug-By-Pass | 1 |
5e-8669 Pump Gp-Fuel
| 5E***69 | Pump Group-Fuel | 1 |
| 5E***40 | Plug-By-Pass | 1 |
| 5E***41 | Plug-Pipe | 3 |
1g-7536 Pump Gp-Fuel
| 08***68 | Spacer | 1 |
| 13***25 | Pump Group-Fuel | 1 |
| 1G***36 | Pump Group-Fuel | 1 |
137-2525 Pump Gp-Fuel
| 13***25 | Pump Group-Fuel | 1 |
| 13***74 | Piston | 1 |
| 13***75 | Gasket-Cover | 2 |
107-7732 Pump Gp-Fuel Injection
| 10***32 | Pump Group-Fuel Injection | 1 |
| 11***18 | Seal-O-Ring; (26.64mm Id) | 1 |
| 12***74 | Seal-O-Ring; (7.59mm'Id) | 1 |
7c-1500 Pump Gp-Fuel Injection
| 03***70 | Seal-O-Ring; (7.59mm Id) | 1 |
| 3T***49 | Bolt-Socket Hd; (M6 X 1.0 X 25) | 1 |
| 6V***28 | Seal-O-Ring; (26.64mm Id) | 1 |
8n-5251 Pump Gp-Fuel Prm & Prim Filter
| 1L***69 | Ring-Retaining | 1 |
| 2H***29 | Ring - Retaining External | 1 |
| 2J***57 | Packing,Preformed Screw Assembly Part Of Kit P/N 5r***25 | 1 |
119-2987 Pump Gp-Fuel Priming
| 06***39 | Seal-O-Ring | 1 |
| 11***87 | Pump Group-Fuel Priming | 1 |
| 13***41 | Pump Group-Fuel Priming; (Hand) | 1 |
8n-3365 Pump Gp-Fuel Priming
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
7r-7110 Tank & Pump Gp-Fuel
| 1G***36 | Pump Group-Fuel | 1 |
| 4M***61 | Bolt-To Assemble Valve As And Plates | 4 |
| 5E***15 | Plate | 1 |
6r-0188 Tank Gp-Fuel
| 3F***34 | Baffle; (Fuel Tank Fill Cap) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4B***63 | Filter Element-Fuel; (Fuel Cap)(Fuel Filler Cap)(86mm Od) | 1 |
141-8288 Valve Gp-Fuel Relief
| 14***87 | Spring | 1 |
| 14***88 | Valve Group-Fuel Relief | 1 |
| 2W***94 | Plunger As-Valve | 1 |
Grade References
109-5626 Leveler Gp -Outboard
| 08***09 | Bracket | 5 |
| 08***38 | Channel | 1 |
| 10***26 | Leveler Group; -Outboard | 1 |
109-5627 Leveler Gp -40 Ft Grade
| 10***04 | Tube; (1.1-M) | 1 |
| 10***27 | Leveler Group; -40-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5622 Leveler Gp -40 Ft Outboard
| 08***09 | Bracket | 12 |
| 08***24 | Pin-Hitch | 6 |
| 08***68 | Beam-End | 2 |
109-5628 Leveler Gp -30 Ft Grade
| 10***04 | Tube; (1.1-M) | 1 |
| 10***28 | Leveler Group; -30-Ft Grade Reference | 1 |
| 10***34 | Tube As | 1 |
109-5625 Leveler Gp -30 Ft Over Screed
| 08***09 | Bracket | 7 |
| 08***11 | Shoe-Pan | 1 |
| 08***24 | Pin-Hitch | 2 |
109-5623 Leveler Gp -30 Ft Outboard
| 08***09 | Bracket | 12 |
| 08***24 | Pin-Hitch | 6 |
| 08***68 | Beam-End | 2 |
109-5624 Leveler Gp -30 Ft Over Screed
| 08***09 | Bracket | 6 |
| 08***24 | Pin-Hitch | 2 |
| 08***69 | Beam-End | 2 |
8c-7158 Ski Expansion Gp
| 08***92 | Clevis | 1 |
| 08***76 | Stud | 4 |
| 08***31 | Bracket | 2 |
8c-7159 Stringline Ar-Traveling
| 03***73 | Bolt; (3/8-16x1.5-In) | 8 |
| 08***09 | Bracket | 6 |
| 08***10 | Bracket | 2 |
109-7795 Stringline Gp
| 08***09 | Bracket | 12 |
| 08***11 | Shoe-Pan | 8 |
| 08***24 | Pin-Hitch | 7 |
8t-7413 Stringline Gp
| 08***09 | Bracket | 12 |
| 08***11 | Shoe-Pan | 8 |
| 08***12 | Guide; (Rear-Outer) | 1 |
5e-9889 Stringline Gp
| 08***09 | Bracket | 6 |
| 08***11 | Shoe-Pan | 4 |
| 08***12 | Guide; (Rear-Outer) | 1 |
8t-7414 Stringline Gp
| 08***09 | Bracket | 12 |
| 08***11 | Shoe-Pan | 8 |
| 08***12 | Guide; (Rear-Outer) | 1 |
109-7796 Stringline Gp
| 08***09 | Bracket | 12 |
| 08***11 | Shoe-Pan | 8 |
| 08***24 | Pin-Hitch | 7 |
Hydraulic System
077-3951 Cap Gp-Hydraulic Oil Filler
| 07***51 | Cap As-Filler Breather | 1 |
| 07***32 | Filter Element-Breather; (Hydraulic Oil Filter) | 1 |
| 07***26 | Gasket | 2 |
8c-7116 Manifold Gp-Control
| 5E***33 | Block-Manifold | 1 |
| 5E***34 | Valve; (Load Control) | 1 |
| 5E***35 | Valve; (Relief Vent) | 1 |
087-0488 Lines Gp-Screed
| 08***64 | Tube As | 1 |
| 08***65 | Tube As | 1 |
| 08***66 | Tube As | 1 |
086-8884 Control Gp-Hydraulic Tow Point
| 08***08 | Valve; (Hydraulic Shutoff) | 2 |
| 08***92 | Cylinder Group-Hydraulic | 2 |
| 08***84 | Control Group-Hydraulic Tow Point | 1 |
087-0489 Lines Gp-Screed
| 08***63 | Tube As | 2 |
| 08***70 | Tube As | 1 |
| 08***71 | Tube As | 1 |
7r-9802 Cooler Gp-Hydraulic Oil
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 5K***90 | Seal-To Hydraulic Cooler Inlet Port | 5 |
| 6R***88 | Hose As | 1 |
1g-5655 Cylinder Gp-Hydraulic
| 08***25 | Ring; (Backup) | 1 |
| 08***20 | Kit-Seal | 1 |
| 08***23 | Seal | 1 |
8c-8002 Cylinder Gp-Hydraulic -Steering
| 03***31 | Ring-Back-Up | 2 |
| 1H***28 | Seal 6.3 cm(2.484 In.) I.D.; Seal--To Seal Pumps To Case | 1 |
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 1 |
081-9292 Cylinder Gp-Hydraulic
| 08***92 | Cylinder Group-Hydraulic | 1 |
| 13***83 | Kit-Seal | 1 |
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 1 |
081-6998 Cylinder Gp-Hydraulic
| 07***02 | Wire, Lock | 1 |
| 08***98 | Cylinder Group-Hydraulic | 1 |
| 08***25 | Ring; (Backup) | 1 |
086-9543 Cylinder Gp-Hydraulic
| 08***43 | Cylinder Group-Hydraulic | 1 |
| 08***19 | Kit-Seal | 0 |
| 08***22 | Backup | 2 |
8c-7166 Cylinder Gp-Hydraulic
| 03***39 | Ring-Back-Up | 1 |
| 16***95 | Seal-U-Cup | 1 |
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 1 |
5e-9708 Cylinder Gp-Hydraulic
| 07***02 | Wire, Lock | 1 |
| 08***25 | Ring; (Backup) | 1 |
| 08***20 | Kit-Seal | 1 |
6r-1586 Cylinder Gp-Steering
| 1A***68 | Nut | 1 |
| 1G***06 | Bar | 1 |
| 1G***07 | Pin | 1 |
7x-9958 Filter Gp-Oil
| 05***19 | Filter Element As-Oil; (Hydraulic) | 1 |
| 05***15 | Gasket | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
1g-9361 Filter Gp-Oil
| 05***15 | Gasket | 1 |
| 07***79 | Filter Element-Oil; (Ultra High Efficiency) | 1 |
| 07***25 | Kit-Seal; (Hydraulic Oil Filter) | 1 |
7r-4987 Hydraulic Ar
| 08***83 | Lines Group-Service Brake | 1 |
| 08***84 | Control Group-Hydraulic Tow Point | 1 |
| 08***02 | Tank Group-Hydraulic | 1 |
111-1295 Hydraulic Ar
| 08***84 | Control Group-Hydraulic Tow Point | 1 |
| 08***02 | Tank Group-Hydraulic | 1 |
| 08***55 | Lines Group-Lubrication | 1 |
7r-7039 Lines Gp-Extension
| 1G***87 | Valve As-Screed; (Lh)(Solenoid Extension) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 5 |
6r-3332 Lines Gp-Auger
| 08***01 | Filter As; (Drive Pump Suction) | 1 |
| 08***35 | Hose As | 1 |
| 1G***03 | Hose As | 1 |
7r-9815 Lines Gp-Auxiliary Hydraulic
| 08***75 | Hose As | 1 |
| 08***50 | Support As | 1 |
| 11***13 | Filter Group-Oil; (Auxiliary Pressure) | 1 |
6r-3356 Lines Gp-Conveyor
| 03***71 | Capscrew, Csk. Hd., 3/8in.-16 N.C. X 1in. | 2 |
| 03***49 | Nut-Self Lock; (No.10.Unc) | 4 |
| 07***09 | Clamp-Hose | 2 |
087-0845 Lines Gp-Counterbalance
| 08***07 | Valve; (2 Way Solenoid) | 1 |
| 08***45 | Lines Group-Counterbalance | 1 |
| 10***05 | Plate | 1 |
117-4715 Lines Gp-Generator Drive
| 11***12 | Plate-Support | 1 |
| 11***03 | Plate | 1 |
| 11***15 | Lines Group-Generator Drive | 1 |
7r-9814 Lines Gp-Hopper
| 07***84 | Clamp | 6 |
| 08***10 | Hose As | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 6 |
6r-3040 Lines Gp-Screed
| 07***84 | Clamp | 4 |
| 2T***70 | Elbow-O-Ring | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 4 |
6r-3047 Lines Gp-Screed
| 07***84 | Clamp | 4 |
| 2T***70 | Elbow-O-Ring | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 5 |
7r-9813 Lines Gp-Screed Elevation
| 08***08 | Hose As | 1 |
| 1G***73 | Hose As | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 6 |
086-8883 Lines Gp-Service Brake
| 07***84 | Clamp | 1 |
| 08***07 | Hose As | 2 |
| 08***83 | Lines Group-Service Brake | 1 |
087-1456 Lines Gp-Steering
| 03***72 | Bolt; (3/8-16-Thd) | 4 |
| 07***84 | Clamp | 10 |
| 08***73 | Clamp | 4 |
087-1454 Lines Gp-Truck Hitch
| 08***73 | Clamp | 2 |
| 08***98 | Tube As | 1 |
| 08***99 | Tube As | 1 |
7r-9816 Lines Gp-Vibratory
| 08***01 | Hose As | 1 |
| 1G***94 | Valve Group-Relief | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 3 |
124-7612 Manifold Gp-Control
| 07***13 | Cartridge | 1 |
| 12***76 | Kit-Seal; (Counterbalance Valve) | 1 |
| 12***12 | Manifold Group | 1 |
087-0748 Motor Gp-Piston
| 08***48 | Motor As-Hydraulic | 1 |
| 1G***74 | Piston | 7 |
| 1G***75 | Guide-Slipper | 1 |
086-9481 Motor Gp-Gerotor
| 08***81 | Motor Group-Gerotor | 1 |
| 08***70 | Drive | 1 |
| 08***71 | Geroler As | 1 |
8c-7167 Motor Gp-Gerotor
| 16***21 | Kit-Bearing; (Vibratory Motor) | 1 |
| 7R***56 | Seal-O-Ring | 1 |
| 7R***57 | Seal | 1 |
6r-4097 Motor Gp-Piston -Propel
| 08***37 | Spring | 9 |
| 08***67 | Seal-O-Ring | 1 |
| 08***61 | Plate As. | 1 |
8c-7276 Motor Gp-Piston
| 1G***74 | Piston | 7 |
| 1J***74 | Ring-Retaining | 2 |
| 2B***47 | Bolt (1/2" X 2 1/4") Rops Mounting Bracket To Cover Assembly | 4 |
078-0381 Motor Gp-Gerotor
| 07***81 | Motor Group-Hydraulic; S/N 6ad1-264 | 1 |
| 09***39 | Key | 1 |
| 11***64 | Plate | 4 |
113-3316 Motor Gp-Piston
| 10***29 | Kit-Check Valve | 2 |
| 11***16 | Motor Group-Piston | 1 |
| 12***11 | Plate-Control | 1 |
121-2058 Motor Gp-Piston
| 03***20 | Ring | 4 |
| 07***53 | Pin; (Spring) | 4 |
| 10***83 | Bearing | 2 |
8c-7616 Pump Gp-Piston
| 03***08 | Spring | 1 |
| 03***88 | Bolt-12 Point Head; (3/8-16x1.125-In) | 2 |
| 07***75 | Shim | 1 |
8c-7987 Pump Gp-Piston
| 07***35 | Kit-Bearing; (Auxiliary Pump) | 1 |
| 07***44 | Kit-Bearing | 1 |
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
5e-8701 Pump Gp-Gear
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 4 |
| 3H***32 | Bolt 11.43 cm(4.50 In.) Long | 4 |
| 5E***01 | Pump Group-Gear | 1 |
7r-8148 Pump Gp-Piston
| 03***04 | Key | 1 |
| 03***05 | Seal-O-Ring | 2 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
143-2872 Pump Gp-Piston -Drag Conveyor, Auger Conveyor
| 07***75 | Shim | 1 |
| 08***98 | Cover-Gerotor | 1 |
| 08***02 | Plug-Orifice | 2 |
7r-8147 Pump Gp-Piston
| 03***04 | Key | 1 |
| 03***05 | Seal-O-Ring | 2 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
104-9268 Pump Gp-Piston
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 2 |
| 05***33 | Seal | 1 |
| 06***45 | Plug | 1 |
9t-2031 Rotating Gp-Pump
| 00***83 | Ring-Snap | 1 |
| 9T***31 | Rotating Group-Pump; -Steering, Pilot | 1 |
| 9T***57 | Pin | 3 |
086-9002 Tank Gp-Hydraulic
| 07***71 | Gauge; (Hydraulic Oil Level) | 2 |
| 07***51 | Cap As-Filler Breather | 1 |
| 08***02 | Tank Group-Hydraulic | 1 |
1g-5787 Valve Gp-Control
| 1G***87 | Valve As-Screed; (Lh)(Solenoid Extension) | 1 |
| 1G***19 | Valve Group-Solenoid | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
9n-7775 Valve Gp-Solenoid
| 08***80 | Case As | 2 |
| 08***82 | Body | 1 |
| 08***84 | Coil | 2 |
5e-4817 Valve Gp-Check
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 5E***17 | Valve Group; (Orifice) | 1 |
6r-3690 Valve Gp-Bank
| 03***37 | Setscrew-Socket | 1 |
| 1G***21 | Valve-Block | 2 |
| 1G***81 | Valve | 2 |
1g-6622 Valve Gp-Control
| 03***79 | Seal-O-Ring (Id=10.82mm) | 5 |
| 1G***22 | Valve Group-Control | 1 |
| 6D***31 | Screw-Socket Head; (8-32x0.375-In) | 2 |
1g-6319 Valve Gp-Solenoid
| 03***28 | Seal-O-Ring | 2 |
| 08***90 | Seal-O-Ring | 2 |
| 1G***19 | Valve Group-Solenoid | 1 |
7r-0197 Pump Gp-Metering -Steering
| 07***24 | Kit-Seal | 1 |
| 17***48 | Kit-Check Valve; (Steering Metering Pump) | 1 |
| 3G***89 | Cap | 1 |
Implements
5e-9875 Extension Ar
| 5E***25 | Extension Group-Auger; -2-Ft, Lh | 1 |
| 5E***75 | Extension Ar | 1 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 3 |
5e-9802 Extension Ar
| 5E***02 | Extension Ar | 1 |
| 5E***09 | Extension Group-Auger; -1-Ft, Rh | 1 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 3 |
5e-9801 Extension Ar
| 5E***01 | Extension Ar | 1 |
| 5E***08 | Extension Group-Auger; -1-Ft, Lh | 1 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 3 |
5e-9876 Extension Ar
| 5E***26 | Extension Group-Auger; -2-Ft, Rh | 1 |
| 5E***76 | Extension Ar | 1 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 3 |
7r-7249 Extension Ar-3 X 3
| 1G***88 | Structural Group; Structural Gp-Extension-3 X 3 | 1 |
| 7R***39 | Hydraulic Group-Extension; Hydraulic Gp-Extension-3 X 3 | 1 |
| 7R***49 | Extension Ar-3 X 3 | 1 |
7x-7320 Extension Gp-Strike-Off -Lh
| 7X***20 | Extension Group; -Lh | 1 |
7x-8858 Extension Gp-Screed -Lh
| 06***97 | Capscrew, Flt Soc Hd., 3/8" N.C. X 1 1/4" | 4 |
| 08***74 | Spacer; (Lh) | 5 |
| 08***67 | Support-Platform | 2 |
7x-9182 Extension Gp-Screed -Rh
| 06***97 | Capscrew, Flt Soc Hd., 3/8" N.C. X 1 1/4" | 4 |
| 08***74 | Spacer; (Lh) | 2 |
| 08***75 | Spacer | 2 |
7x-9183 Extension Gp-Screed -Lh
| 06***97 | Capscrew, Flt Soc Hd., 3/8" N.C. X 1 1/4" | 4 |
| 08***74 | Spacer; (Lh) | 2 |
| 08***75 | Spacer | 2 |
7x-8859 Extension Gp-Screed -Rh
| 06***97 | Capscrew, Flt Soc Hd., 3/8" N.C. X 1 1/4" | 4 |
| 08***74 | Spacer; (Lh) | 5 |
| 08***67 | Support-Platform | 2 |
6r-4001 Hitch Ar-Truck
| 08***54 | Lines Group-Truck Hitch | 1 |
| 6R***01 | Hitch Ar-Truck | 1 |
| 8C***43 | Hitch Group-Truck; Hitch Gp-Truck-Quick | 1 |
111-1370 Hitch Ar-Truck
| 11***70 | Hitch Ar-Truck | 1 |
| 13***82 | Hitch Group-Truck | 1 |
| 1D***18 | Nut-Plt-Jam; (5/8unc) | 1 |
8i-0624 Hitch Ar-Truck
| 08***54 | Lines Group-Truck Hitch | 1 |
| 8I***61 | Hitch Ar-Truck | 1 |
| 8I***24 | Hitch Ar-Truck | 1 |
8i-0561 Hitch Ar-Truck
| 11***68 | Hitch Group-Truck | 1 |
| 1K***70 | Nut (National Coarse) | 8 |
| 7X***46 | Bolt 5/8" X 2" Long (Second Type) | 1 |
114-8968 Hitch Ar-Truck
| 08***54 | Lines Group-Truck Hitch | 1 |
| 11***70 | Hitch Ar-Truck | 1 |
| 11***86 | Hitch Group-Truck | 1 |
7r-6259 Hitch Gp-Truck
| 08***05 | Plate | 1 |
| 08***06 | Plate | 1 |
| 08***07 | Plate | 1 |
8c-4343 Hitch Gp-Truck
| 2N***37 | Elbow-Flared | 2 |
| 7K***81 | Strap-Pressure & Return Hoses To | 2 |
| 7R***97 | Sleeve (Order By The Inch) | 0 |
111-1368 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***68 | Hitch Group-Truck | 1 |
133-8682 Hitch Gp-Truck
| 05***12 | Ring-Retaining; (Internal) | 2 |
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 11***88 | Guide; (31.9x43.5x9.65-mm Thk)(Roller) | 2 |
8i-0641 Hitch Gp-Truck
| 09***08 | Hose As | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 5E***75 | Clamp | 4 |
113-0086 Hitch Gp-Truck
| 07***84 | Clamp | 4 |
| 11***86 | Hitch Group-Truck | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
134-6681 Roller Ar-Push
| 13***81 | Roller Ar-Push | 1 |
| 13***82 | Roller Group-Push | 1 |
| 5C***66 | Bolt (25 mm Long); (5/8-11x1-In) | 1 |
102-4646 Roller Ar-Push
| 10***46 | Roller Ar-Push | 1 |
| 11***58 | Screw; 12-Point Screw, Screw, Roller Group-Push | 1 |
| 5C***66 | Bolt (25 mm Long); (5/8-11x1-In) | 1 |
109-1547 Roller Gp
| 08***75 | Hub; (Wheel) | 1 |
| 08***76 | Shaft-Governor Control | 1 |
| 08***79 | Lock | 1 |
134-6682 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 8 |
| 13***82 | Roller Group-Push | 1 |
| 13***83 | Roller As | 1 |
5e-9822 Roller Gp-Push
| 0S***26 | Bolt, Hex. Hd., 3/4in.-10 N.C. X 1 1/2in. | 8 |
| 10***19 | Tube | 2 |
| 2B***90 | Pin | 4 |
118-8358 Roller Gp-Push
| 09***55 | Washer; (39x72x1.5-mm Thk) | 10 |
| 11***57 | Roller As | 1 |
| 11***58 | Screw; 12-Point Screw, Screw, Roller Group-Push | 1 |
6r-1659 Shoe Gp-Cutoff
| 5P***24 | Bolt-Plt; (1/2unc X 2 1/4) | 2 |
| 5P***66 | Capscrew; (Hex Hd) (1/2-13 Nc X 1 1/2) (Gd 8 Z) | 2 |
| 6R***06 | Shoe As-Cutoff | 2 |
Lubrication System
1n-3477 Breather Gp -Crankcase
| 1N***77 | Breather Group; Breather Group | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 5N***85 | Washer-Sealing; (Sealing) | 1 |
103-0803 Filler Gp-Engine Oil
| 10***03 | Filler Group-Engine Oil | 1 |
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
| 6L***09 | Seal-Rubber | 1 |
7w-5645 Filler Gp-Engine Oil
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
| 6L***09 | Seal-Rubber | 1 |
| 6V***40 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 1 |
7c-0271 Filter Gp-Engine Oil
| 1R***39 | Filter As-Engine Oil; (Standard Efficiency) | 1 |
| 24***64 | Spring; (Yoke) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
4p-8183 Filter Gp-Engine Oil
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 23***54 | Gasket | 1 |
| 24***64 | Spring; (Yoke) | 2 |
7w-8420 Fumes Disposal Gp
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 1 |
| 7C***52 | Hose-Disposal; (Fumes)(Fumes) | 1 |
103-0806 Gauge Gp-Oil Level (Dipstick)
| 10***06 | Gauge Group-Oil Level (Dipstick) | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
9y-7067 Gauge Gp-Oil Level (Dipstick)
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 9Y***67 | Gauge Group-Oil Level (Dipstick) | 1 |
| 9Y***68 | Gauge-Oil Level (Dipstick) | 1 |
6i-2687 Gauge Gp-Oil Level (Dipstick) -Engine
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 6I***87 | Gauge Group-Oil Level (Dipstick) | 1 |
| 6I***88 | Gauge-Oil Level (Dipstick); (Engine) | 1 |
6i-2689 Gauge Gp-Oil Level (Dipstick)
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 4P***56 | Gauge-Oil Level (Dipstick) | 1 |
| 5P***70 | Nut-Hard; (M8 X 1.25) | 1 |
4w-2793 Gauge Gp-Oil Level (Dipstick)
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 4W***93 | Gauge Group-Oil Level (Dipstick); Oil Level Gage Group (Dipstick) | 1 |
| 4W***95 | Tube As-Guide | 1 |
4w-2914 Lines Gp-Engine Oil
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
| 4W***14 | Lines Group-Engine Oil | 1 |
7c-2475 Lines Gp-Engine Oil
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
| 6V***40 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 4 |
4p-7703 Lines Gp-Turbocharger Oil
| 11***19 | Tube As | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 1S***57 | Gasket; (Turbocharger-Oil Supply) | 1 |
1w-6030 Lines Gp-Turbocharger Oil
| 1S***57 | Gasket; (Turbocharger-Oil Supply) | 1 |
| 1W***30 | Lines Group-Turbocharger Oil | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
7c-2476 Lines Gp-Turbocharger Oil
| 11***42 | Adapter | 1 |
| 1S***57 | Gasket; (Turbocharger-Oil Supply) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
4w-2195 Pump Gp-Engine Oil
| 2W***25 | Pump Group-Engine Oil | 1 |
| 4W***95 | Pump Group-Engine Oil; Engine Oil Pump Group | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
119-2924 Pump Gp-Engine Oil
| 10***05 | Spring | 1 |
| 11***24 | Pump Group-Engine Oil | 1 |
| 2W***77 | Body As-Oil Pump | 1 |
200-4497 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
2w-8625 Pump Gp-Engine Oil
| 2W***77 | Body As-Oil Pump | 1 |
| 2W***78 | Plunger-Relief | 1 |
| 2W***79 | Washer; (8.5x9.5x1.6-mm Thk) | 1 |
Machine Arrangement
7r-4988 Chassis Ar
| 08***48 | Guide Group-Steering | 1 |
| 10***79 | Guide Group-Steering | 1 |
| 11***41 | Frame As | 1 |
110-0989 Common Ar
| 11***89 | Common Ar | 1 |
| 11***94 | Electrical Ar | 1 |
| 11***95 | Hydraulic Ar | 1 |
7r-5000 General Ar
| 7R***85 | Electrical Ar | 1 |
| 7R***87 | Hydraulic Ar | 1 |
| 7R***88 | Chassis Ar | 1 |
125-5719 Screed Ar
| 12***96 | Control Group-Thickness | 2 |
| 12***46 | Screed | 1 |
| 12***19 | Screed Ar | 1 |
7x-9158 Screed Ar
| 08***88 | Control Group-Extension | 1 |
| 08***89 | Control Group-Vibration | 1 |
| 08***90 | Fuel Group-Screed; Fuel Gp- Screed | 1 |
Operator Station
7r-4990 Console Ar
| 6R***07 | Installation Group; -Steering | 1 |
| 6R***97 | Brake Group-Parking; -Rh | 2 |
| 7R***64 | Console Group-Operator | 1 |
7r-3064 Console Gp-Operator
| 08***53 | Bolt; (3/8-16x0.625-In)(3/8-16-2a Thd) | 4 |
| 08***19 | Cover; (L.H.) | 1 |
| 08***20 | Cover; (R.H.) | 1 |
7r-4683 Horn & Alarm Gp
| 3K***60 | Nut, Hex (3/8 - 16 Nc, Plastic Insert) | 3 |
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 1 |
6r-1107 Steering Column Gp -Steering
| 07***65 | Nut, 13/16 | 2 |
| 1G***49 | Bracket; (Steering Valve) | 2 |
| 1T***20 | Bolt-12 Point Head; (3/8-16x1.25-In) | 8 |
7r-4407 Panel Gp-Instrument
| 3E***35 | Gauge Group-Coolant Temperature; (Coolant) | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 3 |
5e-9205 Panel Gp-Instrument
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 4 |
| 4W***42 | Indicator-Volt | 1 |
| 4W***20 | Indicator-Fuel Level | 1 |
7r-3098 Seat Gp
| 06***98 | Nut-Self Locking | 2 |
| 11***84 | Seat Group | 1 |
| 2H***89 | Nut (Self Locking) | 2 |
Power Train
120-6713 Brake & Planetary Gp
| 12***13 | Brake & Planetary Group | 1 |
| 12***80 | Kit-Lining; (Brake, Planetary, Output)(Outbrd.) | 1 |
| 12***81 | Kit-Lining; (Brake, Planetary, Input)(Inbrd.) | 1 |
149-4890 Brake & Planetary Gp
| 12***80 | Kit-Lining; (Brake, Planetary, Output)(Outbrd.) | 1 |
| 12***81 | Kit-Lining; (Brake, Planetary, Input)(Inbrd.) | 1 |
| 12***20 | Plug | 2 |
105-2523 Drive Ar-Wheel
| 08***91 | Mounting As; (Rh) | 1 |
| 08***92 | Mounting As; (Lh) | 1 |
| 10***23 | Drive Ar-Wheel | 1 |
6r-1905 Drive Ar-Wheel
| 08***91 | Mounting As; (Rh) | 1 |
| 08***92 | Mounting As; (Lh) | 1 |
| 1G***06 | Installation Group-Controls | 1 |
6r-0250 Hub Gp-Wheel
| 00***31 | Cup-Bearing | 2 |
| 00***43 | Nut | 1 |
| 3B***47 | Pin-Cotter; (Cotter) | 1 |
105-2524 Lines Gp-Propel
| 09***96 | Hose As | 1 |
| 10***68 | Pump Group-Piston | 1 |
| 10***24 | Lines Group-Propel | 1 |
6r-3331 Lines Gp-Propel
| 08***01 | Filter As; (Drive Pump Suction) | 1 |
| 08***75 | Hose As | 1 |
| 08***58 | Hose As | 1 |
112-7506 Lines Gp-Propel
| 07***84 | Clamp | 1 |
| 08***07 | Hose As | 3 |
| 08***40 | Hose As | 3 |
112-7505 Lines Gp-Propel
| 08***01 | Filter As; (Drive Pump Suction) | 1 |
| 08***75 | Hose As | 1 |
| 08***58 | Hose As | 1 |
6r-1904 Lines Gp-Propel
| 1G***10 | Tube As | 1 |
| 1G***11 | Tube As | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 14 |
110-9677 Manifold Gp-Front Wheel Drive
| 11***60 | Valve-Relief | 1 |
| 11***61 | Valve-Solenoid | 1 |
| 11***77 | Manifold Group-Front Wheel Drive | 1 |
111-3451 Planetary Gp-Final Drive
| 06***11 | Thrust Race; (Pa110b-245), Seal | 3 |
| 07***78 | Seal-O-Ring | 1 |
| 07***31 | Stud | 12 |
113-3317 Planetary Gp-Final Drive
| 09***28 | Ring-Retaining; (External) | 3 |
| 11***17 | Planetary Group-Final Drive | 1 |
| 16***12 | Kit-Seal | 0 |
136-4523 Planetary Gp-Final Drive
| 07***78 | Seal-O-Ring | 1 |
| 07***31 | Stud | 12 |
| 08***62 | Gear-Planetary; (34-Teeth) | 4 |
1g-8609 Support Gp-Motor
| 1G***09 | Support Group-Motor | 1 |
| 1G***10 | Support | 1 |
| 1G***11 | Ring-Snap | 1 |
6r-0196 Support Gp-Suspension -Lh-Rear
| 08***77 | Plate-Locking | 1 |
| 08***78 | Adjuster As-Bearing; (Bearing) | 1 |
| 08***05 | Pin | 1 |
6r-0193 Support Gp-Suspension -Rh-Front
| 08***77 | Plate-Locking | 1 |
| 08***78 | Adjuster As-Bearing; (Bearing) | 1 |
| 08***83 | Spindle As; (Rh) | 1 |
6r-0194 Support Gp-Suspension -Rh-Rear
| 08***77 | Plate-Locking | 1 |
| 08***78 | Adjuster As-Bearing; (Bearing) | 1 |
| 08***05 | Pin | 1 |
6r-0195 Support Gp-Suspension -Lh-Front
| 08***77 | Plate-Locking | 1 |
| 08***78 | Adjuster As-Bearing; (Bearing) | 1 |
| 08***82 | Spindle As; (Lh) | 1 |
215-1266 Valve Gp-Solenoid
| 08***87 | Kit-Seal; (Solenoid Valve) | 1 |
| 08***88 | Plug-Seal | 1 |
| 08***89 | Plate-End | 1 |
110-5974 Valve Gp-Solenoid
| 11***74 | Valve Group-Solenoid | 1 |
| 21***66 | Valve Group-Solenoid | 1 |
| 21***67 | Valve Group-Solenoid | 1 |
215-1267 Valve Gp-Solenoid
| 08***85 | Spring | 2 |
| 08***86 | Washer | 2 |
| 08***87 | Kit-Seal; (Solenoid Valve) | 1 |
086-8625 Wheel Gp
| 08***24 | Tire; (Tubeless 18x25-16ply) | 1 |
| 08***25 | Wheel Group | 1 |
| 1K***74 | Valve Group; (Tire Inflation) | 1 |
6r-0251 Wheel Gp
| 6R***51 | Wheel Group | 1 |
| 6R***15 | Wheel As | 1 |
| 8C***59 | Cutting Edge | 8 |
110-0992 Wheel Gp
| 08***80 | Spindle As | 2 |
| 11***92 | Wheel Group | 1 |
| 6R***50 | Hub Group-Wheel | 2 |
6r-1542 Wheel Gp
| 08***64 | Wheel As | 1 |
| 6R***97 | Tire-Solid; (22x7x17.5)(Outer) | 2 |
| 6R***42 | Wheel Group | 1 |
111-1530 Wheel Gp
| 08***24 | Tire; (Tubeless 18x25-16ply) | 1 |
| 11***30 | Wheel Group | 1 |
| 11***92 | Wheel As | 1 |
Service Equipment And Supplies
7r-4991 Finish Ar
| 6R***43 | Lock Group-Vandalism; -Protection | 1 |
| 6R***73 | Plate & Film Group | 1 |
| 7R***91 | Finish Ar | 1 |
8i-0511 Finish Gp
| 08***71 | Plate-Scale | 2 |
| 08***19 | Decal-Slope-Lh | 1 |
| 08***20 | Decal-Slope-Rh | 1 |
7r-4741 Lines Gp-Spray Down
| 08***77 | Adapter | 1 |
| 1G***70 | Extension-Curve | 1 |
| 1G***79 | Hose As | 1 |
6r-1943 Lock Gp-Vandalism -Protection
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
| 5P***02 | Padlock Group; (Includes: Battery Compartments, Platform Compartments, Radiator Access Door, Firewall Doors) | 10 |
| 6R***43 | Lock Group-Vandalism; -Protection | 1 |
6r-2273 Plate & Film Gp
| 08***17 | Film-Instruction; (Manuals Inside) | 1 |
| 08***67 | Film-Warning; (No Step)(No Step) | 5 |
| 08***27 | Film-Warning; (Machine Mounting) | 2 |
087-0889 Reel Gp-Washdown Hose
| 08***89 | Reel Group-Washdown Hose | 1 |
| 17***28 | Fitting-Swivel | 1 |
| 17***29 | Seal-V-Ring | 1 |
6r-0306 Reel Gp-Washdown Hose
| 08***87 | Bracket As | 1 |
| 1G***70 | Extension-Curve | 1 |
| 2T***05 | Elbow | 1 |
6r-0307 Reel Gp-Washdown Hose
| 08***89 | Reel Group-Washdown Hose | 1 |
| 08***84 | Plate As | 2 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 2 |
7r-4993 Shipping Gp
| 7R***98 | Seat Group | 2 |
| 7R***93 | Shipping Group | 1 |
Slope And Grade Control
7r-0337 Beam Gp-Transverse
| 08***65 | Bracket | 1 |
| 08***15 | Cushion-Rubber | 2 |
| 08***17 | Support | 1 |
110-2422 Bracket Gp-Grade & Slope
| 10***31 | Bracket As | 1 |
| 10***37 | Bracket As | 1 |
| 10***14 | Clip | 4 |
110-2420 Cable Gp-Control
| 10***20 | Cable As-Rh | 1 |
| 10***21 | Cable As-Lh | 1 |
| 10***22 | Cable As | 2 |
109-7778 Control Ar-Grade & Slope
| 10***06 | Cable As | 2 |
| 10***76 | Tube-Control | 2 |
| 10***23 | Plate | 1 |
137-6913 Control Ar-Grade & Slope
| 11***43 | Mounting Group-Control; -Topcon Control System | 2 |
| 13***82 | Harness As-Screed | 2 |
| 13***53 | Control Group-Grade & Slope; -Premier Control System | 1 |
112-4865 Control Ar-Grade & Slope
| 10***06 | Cable As | 2 |
| 10***76 | Tube-Control | 2 |
| 11***20 | Cable Group-Control | 1 |
5e-9890 Control Gp-Grade
| 13***89 | Support As; (Sensor) | 2 |
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 20 |
| 5E***90 | Control Group-Grade | 1 |
8c-4336 Control Gp-Grade & Slope
| 7X***76 | Control Group-Slope | 1 |
| 8C***36 | Control Group-Grade & Slope | 1 |
086-8927 Control Gp-Grade & Slope
| 08***27 | Control Group-Grade & Slope | 1 |
| 5E***90 | Control Group-Grade | 1 |
| 7X***76 | Control Group-Slope | 1 |
190-7525 Control Gp-Grade & Slope -Topcon Control System
| 10***94 | Junction Box | 2 |
| 10***98 | Control Group-Grade & Slope | 2 |
| 10***08 | Sensor Group-Grade; (Control) | 2 |
130-7053 Control Gp-Grade & Slope -Premier Control System
| 12***36 | Bracket-Mounting | 2 |
| 13***53 | Control Group-Grade & Slope; -Premier Control System | 1 |
| 16***30 | Sensor-Slope | 1 |
168-5031 Control Gp-Grade & Slope
| 14***22 | Cover | 1 |
| 14***25 | Seal-Bushing | 1 |
| 14***26 | Gasket | 1 |
7x-8776 Control Gp-Slope
| 08***65 | Hinge | 2 |
| 08***39 | Cover | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 8 |
8t-8030 Control Gp-Slope
| 5E***37 | Case | 1 |
| 5E***42 | Module As | 1 |
| 5E***44 | Cover | 1 |
8t-8029 Controller Gp
| 5E***37 | Case | 1 |
| 5E***38 | Hub; (Right) | 1 |
| 5E***39 | Housing As | 1 |
112-4043 Mounting Gp-Control -Topcon Control System
| 11***43 | Mounting Group-Control; -Topcon Control System | 1 |
| 13***89 | Support As; (Sensor) | 1 |
| 25***04 | Spacer | 4 |
137-6915 Mounting Gp-Control
| 12***37 | Plate | 1 |
| 13***84 | Plate As | 2 |
| 13***85 | Mount As | 2 |
8t-8028 Controller As
| 1G***32 | Knob | 1 |
| 7R***75 | Cable | 1 |
| 7R***76 | Potentiometer | 1 |
8c-4337 Sensor Gp-Grade
| 11***93 | Bracket | 1 |
| 18***44 | Jack Group-Height Adjuster | 1 |
| 18***47 | Support As | 1 |
6r-2345 Sensor Gp-Sonic
| 10***28 | Clamp | 1 |
| 11***43 | Cable As | 2 |
| 1G***11 | Shaft-Governor Control | 2 |
115-1055 Sensor Gp-Sonic
| 03***12 | Screw-Forming; (10-24x0.5-In) | 2 |
| 10***25 | Support As-Sensor | 2 |
| 10***66 | Sensor As-Sonic; (Mat'L Flow) | 2 |
Undercarriage
6r-0190 Bogie Ar-Front
| 6R***90 | Bogie Ar-Front | 1 |
| 6R***91 | Suspension Group-Bogie; -Rh | 1 |
| 6R***92 | Suspension Group-Bogie; -Lh | 1 |
111-1333 Drive Gp-Rear
| 11***48 | Mount As | 1 |
| 11***33 | Drive Group-Rear | 1 |
| 11***51 | Planetary Group-Final Drive | 1 |
7r-7587 Drive Gp-Rear
| 11***16 | Motor Group-Piston | 1 |
| 11***17 | Planetary Group-Final Drive | 1 |
| 11***18 | Planetary Group-Final Drive | 2 |
6r-0191 Suspension Gp-Bogie -Rh
| 08***98 | Bogie As; (Rh) | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
| 5P***97 | Ring-Retaining; (External) | 1 |
6r-0192 Suspension Gp-Bogie -Lh
| 08***99 | Bogie As; (Lh) | 1 |
| 09***99 | Fitting-Grease; (Hydraulic) | 1 |
| 5P***97 | Ring-Retaining; (External) | 1 |
111-1297 Undercarriage Ar
| 11***97 | Undercarriage Ar | 1 |
| 11***33 | Drive Group-Rear | 2 |
| 11***30 | Wheel Group | 2 |
7r-4989 Undercarriage Ar
| 08***25 | Wheel Group | 2 |
| 6R***90 | Bogie Ar-Front | 1 |
| 7R***89 | Undercarriage Ar | 1 |
AP-1000 serial number reference
The PIN/serial plate on an AP-1000 series paver is mounted on the tractor frame near the engine compartment or operator's platform, typically on the right-hand side rail below the console - check the machine's maintenance manual for the exact plate diagram for your generation. The plate shows a 3-letter serial prefix followed by a sequential unit number (e.g., AC400247); the prefix identifies the specific model/generation build block (base AP-1000, AP-1000B, AP-1000D, or AP-1000F), while the trailing digits are that unit's build sequence number, not a date code.
| Prefix | Identifies | Notes |
|---|---|---|
| 1HD | AP-1000 (base wheel paver) | Earliest AP-1000 generation, S/N 1HD1-UP. Parts groupings tie to the 3116-family mechanical era; treat as pre-2000 production. Exact engine calibration for this prefix is not separately documented beyond shared 3116-family parts commonality with the AP-1000B - verify power rating with your dealer. |
| 7HN | AP-1000B wheel paver | Documented on a 2001-build unit (serial 7HN00299). Runs the 3116TA turbocharged engine, rated 130 kW (174 hp) gross. |
| AGP | AP-1000B wheel paver | Second confirmed AP-1000B serial block, same 3116TA engine generation as 7HN. Exact production-year split versus 7HN is not documented - treat both as covering the AP-1000B run until confirmed by data plate. |
| EAD | AP-1000D wheel paver | Confirmed on a 2009-build unit. AP-1000D generation runs the Cat C7 turbocharged six-cylinder ACERT engine, Tier III emissions era, rated 167 kW (224 hp) gross. |
| AC4 | AP-1000F wheel paver | Current-generation AP-1000F, serial block AC400001-UP, in production from roughly 2014 onward. Runs the Cat C7.1 ACERT engine, Tier 4 Final emissions. Multiple in-service units confirm the block spans several production years. |
Frequently asked questions
What engine does the Cat AP-1000 use?
It depends on the generation. Base and AP-1000B machines run the Cat 3116TA turbocharged six-cylinder diesel (about 174 hp/130 kW). The AP-1000D moved to the Cat C7 ACERT (about 224 hp/167 kW). The AP-1000E used either a C7.1 or C6.6 ACERT depending on the emissions market it was built for, and the current AP-1000F runs the Cat C7.1 ACERT Tier 4 Final/Stage IV engine (about 225 hp/167 kW). Always confirm the fitted engine off the machine's own data plate.
What is the operating weight of the Cat AP-1000?
Operating weight varies by series, screed, and drive configuration, roughly 18,900 kg to 20,600 kg (about 41,700 lb to 45,400 lb). Base and lighter-screed configurations sit at the low end; wide extending screeds and six-wheel drive options on later series push toward the upper end. Check the configuration on your specific unit's serial and screed tag for an exact figure.
What replaced the Cat AP-1000?
The AP-1000 name itself carried forward through several internal generations rather than being replaced by a different model family: base/AP-1000B gave way to the AP-1000D, then the AP-1000E, then today's AP-1000F, which remains Caterpillar's current-production large wheel paver. Each step changed the engine and emissions technology while keeping the same wheel-paver chassis and hydrostatic propel/worktool architecture.
What AP-1000 owners discuss
What engine does the AP-1000 use, and does it vary by series?
Engine varies by generation. Earlier AP1000B/AP1000D machines run the Cat C7 ACERT, a turbocharged inline-six meeting Tier III, with no diesel particulate filter. Later AP1000E/AP1000F machines move to the Cat C7.1 ACERT, meeting Tier 4 Final at roughly 168 kW (225 hp), with a diesel particulate filter and automatic regen system. Confirm the engine family off the data plate before ordering filters or planning service intervals - the two families do not share fuel systems.
What powertrain quirks come up most with the earlier C7 ACERT (Tier III, no DPF)?
The common-rail C7 ACERT fuel system runs very high injection pressure. Owners report the fuel pressure regulator on the back of the head can stick open on the return side, so the engine will not build rail pressure and runs weak or fails to start. Leaking injector top O-rings or solenoid seals let fuel seep past into the crankcase, showing up as fuel dilution on an oil sample. The injection system depends on clean engine oil to actuate the injectors, so running past oil-change intervals accelerates injector wear. Have your dealer verify fuel rail pressure and pull an oil sample before condemning an injector.
Anything specific to the later Tier 4 Final C7.1 engine and its DPF?
The C7.1's regen system is automatic and computer-managed - it raises exhaust temperature to burn off accumulated soot without operator input, so long idle stretches between paving passes can trigger more frequent regens than expected. There is no dash warning as the filter approaches its ash-capacity limit, so ash loading sneaks up on operators who skip the scheduled ash service. Persistent low-power or high-backpressure complaints on Tier 4 Final machines usually trace to overdue DPF ash service rather than a sensor fault. Have your dealer verify DPF condition before replacing components.
What wear patterns are typical for the AP-1000's feeder system, since it rides on wheels rather than tracks?
The AP-1000 line is a wheel paver, so undercarriage complaints center on the feeder system rather than track chain. Floor plates under the hopper and tunnel thin out and warp with mix abrasion. Auger flights wear down to a point and lose their ability to move material evenly. Conveyor chains stretch and start to sag, and flight/slat bars wear thin. Auger bearing seals are a recognized failure point - once a seal fails, hot mix works into the bearing and it fails from contamination rather than fatigue. Chain guards and bed plates are wear items by design and get budgeted as recurring replacement, not treated as damage.
What screed heater behavior should operators expect, and is it a fault?
Cat fuel-fired screed heaters heat quickly but punish inattention - leaving burners running once the plate is up to temperature can warp the main plate, worse if the screed sits extended in the air with wind pulling heat off unevenly. Setting the screed onto cold pavement or bare ground makes it act as a heat sink, so heat-up takes noticeably longer in that position - that is normal, not a heater fault. Electric-element screeds trade the warping risk for breaker trips and individual heating-element failures; troubleshoot at the element connections and breaker before assuming a control-board failure.
What electrical or sensor complaints come up most on Cat pavers of this class?
Grade and slope sonic sensors are sensitive to their own neighbors - if the sensor beam is folded up with multiple sonic units bunched close together, they cross-talk and add noise to the sensor actually in use. Unplug unused sensors or space them apart to stop the interference. On the F-series generation, which includes the AP1000F, contractors report console glitches and DC ground-fault codes surfacing after rain, most consistent with moisture reaching a harness connector rather than a control module failing outright - chase the connector and grounding points first. This pattern is reported across F-series Cat pavers broadly rather than confirmed for every AP1000F serial range, so treat it as a starting point, not a diagnosis. Have your dealer verify any persistent ground-fault code with a moisture and insulation test before replacing an ECM.
What should a buyer check on a used AP-1000?
Start at the feeder system: floor plates for warping, auger flights for a worn point instead of a flat edge, conveyor chain for stretch or sag, and auger bearing seals for leaks that let mix into the bearing. The screed plate is the fastest-wearing part on the whole machine - check it before anything else and price a rebuild in if it is thin. Look at the hopper wings: bent wings with paint worn off are a quick tell the machine was not cared for. Confirm which engine family is on the data plate (Tier III C7 versus Tier 4 Final C7.1 with DPF), since that changes fuel-system and emissions service costs going forward. A well-maintained paver can run two decades of service, but only if worn feeder and screed components were replaced as they wore rather than run to failure - ask for service records, not just hour-meter readings.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific AP-1000 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.