Caterpillarwheel-type loaderwheel loader
Caterpillar 994
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 994 is a mining class wheel loader, Caterpillar's largest wheel loader line at launch. The original base 994 (no letter suffix) ran from about 1990 to 1998 under serial prefix 9YF, with roughly 200 units built at Caterpillar's Decatur, Illinois mining vehicle plant. It carries a Cat 3516, sixteen cylinder turbocharged diesel, and lands at an operating weight near 177,100 kg (390,500 lb, about 177 t) with a standard bucket around 17.6 m3 (23 yd3) able to move loads up to about 31.8 t (70,000 lb) per pass. The base 994 was succeeded in 1998 by the 994D (Cat 3516B EUI/TA, about 1,027 kW / 1,375 hp), then the 994F and 994H (Cat 3516B HD EUI, about 1,176 kW / 1,577 hp gross), and today's 994K (Cat 3516E, about 1,377 kW / 1,847 hp gross), with operating weight climbing to roughly 242,600 kg (535,000 lb, about 240 t) at the top of the line. Across generations Cat has offered standard, high lift, extended high lift, and super high lift boom configurations along with rock and coal bucket options to match the machine to truck loading height and material density.
Each generation kept the same 3516 engine family name but changed displacement, injection hardware, and power output, so checking the serial prefix matters more on this model than reading the model number alone. The 994D added a strengthened frame and reinforced lift arms and moved steering from a wheel to a joystick. F series machines and later added onboard fault and trend monitoring. H and K generations added an impeller clutch torque converter with Rimpull Control, and the K added a lock up clutch for direct drive at speed. In the used and parts market, the original 9YF generation is scarce since only about two hundred were built, so parts availability runs thinner and engine and driveline identity should be confirmed off the serial prefix before ordering. The D through K generations are the ones still working in active mining and quarry fleets today, and most parts demand on this model line traces to the torque converter, planetary final drives, and oil cooled brake systems rather than the bucket or ground engaging tools, which are shared more broadly across Cat's large wheel loader range.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 994 specifications
Engine
| Engine model (994, original series) | Cat 3516 EUI, 16-cylinder turbocharged diesel. A certified gross/net power figure for this original series is not consistently published — verify against the machine's data plate before quoting a number. |
| Engine model (994D, later update) | Cat 3516B EUI/TA, 16-cylinder. Gross power approx. 1,025-1,026 kW (1,375 hp); net power approx. 1,015 kW (1,361 hp). Displacement 69.2 L (4,221 cu in), bore 170 mm (6.70 in), stroke 193 mm (7.60 in). |
| Engine model (994F) | Cat 3516B HD EUI, 16-cylinder. Gross power 1,176 kW (1,577 hp); net power 1,091 kW (1,463 hp). Displacement 79.9 L (4,875 cu in), bore 170 mm (6.70 in), stroke 216 mm (8.50 in). |
| Engine model (994H) | Cat 3516B HD EUI, 16-cylinder. Gross power 1,176 kW (1,577 hp); net power cited 1,079-1,091 kW (1,447-1,463 hp) depending on rating standard used — varies by source, verify against the nameplate rating. Same 79.9 L (4,875 cu in) displacement as the 994F. |
| Engine model (994K) | Cat 3516E, 16-cylinder, turbocharged and aftercooled, mechanical-electronic unit injection. Gross power 1,377-1,394 kW (1,847-1,870 hp) depending on rating standard (ISO 14396 vs SAE J1995); net power at standard ambient 1,297 kW (1,739 hp). Displacement 78.1 L (4,766 cu in), bore 170 mm (6.7 in), stroke 215 mm (8.5 in). Peak torque 11,591 N·m (8,549 lbf-ft) at 1,200 rpm; rated speed 1,600 rpm. |
| Cylinders | 16, across all 994 series generations. |
| Emissions tier | Large-engine (over 560 kW) non-road category. 994K engine referenced against U.S. EPA Tier 1 / EU Stage I equivalent in factory literature for this power class. Emissions certification for earlier generations is not documented in accessible sources. |
Weights
| Operating weight (994, original series) | Approx. 177,100 kg (390,500 lb), commonly rounded to about 172-177 t depending on source and configuration. |
| Operating weight (994D) | Approx. 189,300-192,600 kg (417,400-424,700 lb) depending on configuration. |
| Operating weight (994F) | Approx. 193,800 kg (427,200 lb). |
| Operating weight (994H) | Approx. 195,400-195,500 kg (430,900-431,000 lb) depending on source. |
| Operating weight (994K) | Approx. 242,600 kg (534,900 lb), roughly 240 t. |
| Rated payload (994D reference) | Approx. 34,500 kg (76,000 lb) — payload figure documented for the 994D configuration; not separately published for the original 994. |
| Rated payload (994H) | Approx. 38,000 kg (83,776 lb) in standard configuration; approx. 35,000 kg (77,162 lb) in high-lift configuration. |
| Rated payload (994K) | Approx. 45,000 kg (99,208 lb) in standard configuration; approx. 42,000 kg (92,594 lb) in high-lift configuration. |
| Ground pressure | Not published in available factory or dealer literature for this class. |
Dimensions
| Overall length (994, original series) | Approx. 16.9 m (55 ft 5 in). |
| Overall width over tires (994, original series) | Approx. 6.2 m (20 ft 5 in). |
| Overall height (994, original series) | Approx. 6.7 m (22 ft 0 in). |
| Transport length (994, original series) | Approx. 16.65 m (54 ft 8 in). |
| Transport width (994, original series) | Approx. 5.21 m (17 ft 1 in) — reduced-width shipping configuration; differs from over-tire operating width. |
| Transport height (994, original series) | Approx. 6.53 m (21 ft 5 in). |
| Dimensions (994D) | Overall length approx. 16.79 m (55 ft 1 in); width over tires approx. 5.46 m (17 ft 11 in); height to top of exhaust approx. 6.92 m (22 ft 8 in). |
| Dimensions (994F) | Overall length reported at approx. 19.54 m (64 ft 1 in) in one spec chart — notably longer than sibling generations, possibly a different measurement basis (e.g. linkage extended); treat with caution. Width over tires approx. 5.46 m (17 ft 11 in); height to top of cab approx. 6.74 m (22 ft 1 in). |
| Dimensions (994H) | Standard operating length approx. 16.87 m (55 ft 4 in); width approx. 5.61 m (18 ft 5 in); height approx. 7.01 m (23 ft 0 in). |
| Wheelbase (994D/994F reference) | Approx. 6.40 m (21 ft 0 in) — documented for the D/F generation; not separately published for the original series. |
| Outside turning radius (994, original series) | Approx. 11.44 m (37 ft 6 in). |
| Standard tire size (994, original series) | 49.5-57. Note: 53.5/85-57 is documented for the 994F and also cited in historical accounts of the original prototype — tire spec appears to vary by source/configuration, confirm against the specific unit. |
| Ground clearance | Not published in available factory or dealer literature for this class. |
Performance
| Travel speed (994, original series) | Approx. 22.8 km/h (14.2 mph), single published top-speed figure (forward/reverse split not documented for this generation). |
| Travel speed, forward/reverse (994D) | Forward approx. 23.5 km/h (14.6 mph); reverse approx. 25.9 km/h (16.1 mph). |
| Travel speed, forward/reverse (994F) | Forward approx. 22.5 km/h (14.0 mph); reverse approx. 24.9 km/h (15.5 mph). |
| Travel speed, forward/reverse (994H) | Forward approx. 23.3 km/h (14.5 mph); reverse approx. 25.6 km/h (15.9 mph). |
| Travel speed (994K) | Approx. 24.5 km/h forward / 27.0 km/h reverse (15.2/16.8 mph) per factory chart. |
| Maximum bucket discharge height (994, original series) | Approx. 5.66 m (18 ft 7 in). |
| Bucket capacity range (994, original series) | Roughly 10 m3 to 31 m3 (13-40.5 yd3) depending on bucket selection and application; treat as a wide configuration range rather than a single rated figure. |
| Bucket capacity range (994H) | Approx. 14.9-35.9 m3 (19.5-47 cu yd) across available bucket options. |
| Bucket capacity range (994K) | Standard buckets approx. 19.1-24.5 m3 (25-32 cu yd). |
| Bucket breakout force (994F reference) | Approx. 989 kN (222,336 lbf) — documented for the F generation only. |
| Bucket breakout torque (994K reference) | Approx. 426,928 N·m (314,890 lbf-ft) — documented for the K generation; not directly comparable to the 994F force figure since the two use different measurement conventions. |
| Dump clearance / lift height (994H) | 994H offers four lift-linkage configurations giving maximum dump clearance from approx. 5.8 to 7.1 m (19.2 to 23.3 ft) depending on configuration. |
| Gradeability | Not published in available factory or dealer literature for this class. |
Service capacities (summary)
| Fuel tank | Not separately published for the original 994. Later generations for reference: 994D approx. 4,640 L (1,226 US gal); 994F approx. 3,833 L (1,013 US gal); 994H approx. 3,834 L (1,013 US gal); 994K approx. 3,445 L (910 US gal). Confirm against the specific unit's tank before ordering fuel-system parts. |
| Hydraulic system | Not separately published for the original 994. Reference from later generations: 994D approx. 895 L (236.5 US gal); 994F approx. 893 L (236 US gal). Not published in accessible sources for 994H/994K. |
| Cooling system | Not separately published for the original 994. Reference from later generations: 994D approx. 488 L (129 US gal); 994F approx. 490 L (129.5 US gal). |
| Engine oil | Not separately published for the original 994. Reference from the F generation: approx. 286 L (75.6 US gal). |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
994 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) — 994F reference (3516B HD EUI) | 286 L (75.5 US gal) | Cat DEO-ULS multigrade diesel engine oil. SAE 10W-30 for -20°C to 40°C (-4°F to 104°F); SAE 15W-40 for -15°C to 50°C (5°F to 122°F). Base 994 (9YF, 3516 engine) crankcase fill is not separately documented online — verify against the machine's own OMM or data plate. |
| Cooling system — 994F reference | 488 L (129 US gal) | Cat ELC (Extended Life Coolant), premixed or concentrate to 50/50 with water, extended-life formulation. Straight ELC (no water) not used below roughly -37°C; follow OMM ambient chart for pre-mix ratio in extreme cold. |
| Fuel tank — 994F reference | 3,834 L (1,013 US gal) | Ultra low sulfur diesel (No. 1-D or No. 2-D per ambient temperature); No. 1-D or a winter-blend preferred below freezing to avoid fuel waxing. |
| Transmission (powertrain compartment) — 994F reference | 348 L (92 US gal) | Cat TDTO (Transmission/Drive Train Oil). Multigrade TDTO for -15°C to 50°C (5°F to 122°F); straight SAE 30 TDTO acceptable in warmer, stable climates (0°C to 50°C). |
| Final drive, front (differential and final drive housing) — 994F reference | 621 L (164 US gal) | Cat TDTO, same grade selection as transmission per ambient temperature. |
| Final drive, rear (differential and final drive housing) — 994F reference | 621 L (164 US gal) | Cat TDTO, same grade selection as transmission per ambient temperature. |
| Hydraulic system (including tank) — 994F reference | 893 L (236 US gal) total. OMM breaks this into circuits: brake-cooling ~34 L (9 gal), steering/brake ~208 L (55 gal), lift/tilt ~390 L (103 gal), front pump drive ~8 L (2 gal). | Cat HYDO Advanced, ISO VG 46 multigrade, rated -30°C to 45°C (-22°F to 113°F). Cat HYDO (single-grade) is an acceptable alternate where ambient range is narrower. |
| Grease (chassis, pins, bushings) — spec only | Not a fill-capacity item; applied per lubrication schedule/points | Cat Multipurpose Grease (Cat MPGM), NLGI 2 general-purpose; Cat Extreme Application (XA) grease for high-load/high-temperature pin joints per OMM guidance. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 994 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the 994 beyond the schedule
Predictive Maintenance & Fluid Analysis
Sample engine oil, transmission oil, both final drives, and hydraulic oil at every scheduled interval. Metal counts in the transmission and final drive oil flag torque converter or planetary wear long before failure. Track brake cooling oil condition separately from hydraulic oil, since contamination there points to disc wear or seal leakage rather than a hydraulic fault. Trend coolant condition against its change point instead of a fixed calendar date. On F series machines and later, pull onboard fault and trend logs at each service visit to catch drifting coolant temperature or charging voltage early.
Corrective & Common Repairs
Articulation joint pins and bushings, king pins, and steering cylinder pin bores wear fastest under repeated load and carry cycles; check play at every shift change walkaround. Cylinder rod seals and hose couplings around the lift arm pivots are the most common hydraulic leak points on this machine, especially on rods showing scoring. Oil cooled brake cooling screens and coolers need regular cleaning to prevent gradual pedal fade rather than sudden failure. Confirm the exact 3516 engine variant off the serial prefix before ordering engine parts.
Overhaul & Rebuild Points
Torque converter and planetary powershift transmission wear surfaces show up in oil sample trends long before a teardown is needed; budget a major transmission inspection around the extended oil change milestone. Wheel planetary final drives on all four corners are the next highest wear driveline components under constant loaded cycling. Turbocharger and aftercooler cores on the sixteen cylinder 3516 family engine warrant inspection at major overhaul. Expect the articulation hitch and center pins to need bushing replacement by the time the machine reaches a major rebuild.
Seasonal & Environment Servicing
Cold climate 994s need engine oil and transmission oil viscosity swapped to the correct grade ahead of winter, plus a coolant mix check to protect the cooling system at extreme low ambient. Hot, dusty pit sites push radiator core, turbocharger, and air filter service shorter than the factory baseline. High abrasion sites should tighten grease intervals on the articulation joint and lift arm pins below the standard chart. Check tire pressure and watch for heat checking at every shift given the cost of this tire class.
994 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1D-4540 | Bolt,Machine Fuel Filter Mounting | Fuel system service | Check fitment → |
| 6I-2505 | Filter Element As-Air | Air intake service | Check fitment → |
| 6I-2506 | Filter Element As-Air | Air intake service | Check fitment → |
| 6N-6444 | Filter Element As-Air | Air intake service | Check fitment → |
| 8P-5343 | Filter Element-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
994 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 100-FMI 03 | Engine oil pressure sensor circuit, voltage above normal range | Signal wire shorted to a higher-voltage source, connector corrosion, or a failed sensor | Check sensor wiring and connector for shorts/corrosion, verify sensor supply voltage, replace sensor if wiring tests good |
| CID 100-FMI 04 | Engine oil pressure sensor circuit, voltage below normal range | Open circuit, signal wire shorted to ground, or a failed sensor | Inspect harness for chafing or moisture intrusion, test sensor resistance against spec, replace sensor if out of range |
| CID 110-FMI 03 | Engine coolant temperature sensor circuit, voltage above normal range | Open or high-resistance connection in the coolant temperature sensor circuit, or a failed sensor | Inspect sensor connector for corrosion, check wiring continuity, replace sensor if circuit checks out good |
| CID 110-FMI 00 | Engine coolant temperature reading above the normal warning threshold (overheat condition) | Low coolant level, blocked radiator/cooling package, slipping or failed fan drive, or a stuck-closed thermostat | Check coolant level and condition, clear debris from the cooling package, verify fan operation before returning the machine to service |
| CID 102-FMI 08 | Boost/intake manifold pressure sensor signal abnormal | Blocked or damaged sensor sense line, moisture in the line, intermittent wiring connection, or a failing sensor | Check the sensor sense line/port for restriction or moisture, inspect wiring, replace sensor if the fault persists |
| CID 168-FMI 00 | Electrical system voltage above normal range (excess battery/charging voltage) | Faulty voltage regulator or alternator, or a loose battery connection causing charging spikes | Test charging system output at the battery, inspect the regulator and alternator, correct any loose wiring connections |
| CID 168-FMI 01 | Electrical system voltage below normal range (low battery/charging voltage) | Weak or failing battery, loose or corroded battery cable, or an undercharging alternator | Load-test the batteries, clean and tighten cable connections, verify alternator output |
| CID 190-FMI 02 | Engine speed/timing sensor signal erratic, intermittent, or incorrect | Incorrect sensor air gap, damaged tone-ring tooth, metal debris on the timing wheel, or wiring interference | Check and reset the sensor air gap to spec, inspect the tone ring for damage, check harness routing and shielding |
| CID 247-FMI 09 | SAE J1939 data link abnormal update rate, indicating loss of communication between the engine ECM and another machine module (e.g. transmission ECM) | Damaged data link wiring, a loose connector at one of the ECMs, or a module that has lost power | Check the data link harness for damage and confirm secure connections at each ECM; verify power and ground at every module before replacing any ECM |
| CID 1 through CID 16, FMI 05 or FMI 06 (cylinder injector, e.g. "1-05") | Individual cylinder injector solenoid circuit open (FMI 05) or shorted (FMI 06); the same fault pattern repeats per cylinder number | Damaged injector wiring harness, a failed injector solenoid, or a corroded connector | Check the injector wiring harness and connector for damage, measure solenoid resistance against spec, replace the injector or harness section as needed |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
994 attachments & work tools
General purpose / rock buckets
Standard work tool for the 994 series across generations. Typical capacity runs roughly 19-24 m3 (25-32 yd3) for rock/aggregate duty, with standard-lift and high-lift bucket options trading reach for capacity. Exact figures vary by generation and lift-arm configuration - verify against the specific machine's linkage.
Coal / light-material buckets
Larger, lower-density buckets sized for coal and similar light material, documented in the roughly 32-40 m3 (42-52 yd3) range on later-generation spec sheets. These share the same mounting as rock buckets but are not interchangeable in capacity terms without checking lift-arm rated payload.
Ground engaging tools (GET)
Buckets use bolt-on base-edge segments, shouldered double-strap adapters, and bolt-on or top-pin tips matched to material and abrasion conditions. Optional protection add-ons include side cutters, bolt-on cutting edges, shrouds, and base-edge end protection for harsher dig conditions.
Bucket mounting / coupler system
The 994 class is a pin-on bucket loader - the bucket pins directly to the lift arm and tilt linkage. Cat's quick-coupler lines (Cat IT, Fusion) are documented for the smaller 900-series wheel loader frames; no quick-coupler option is documented for this large mining-class chassis, so work-tool changes are a pin-and-service operation, not a cab-operated swap.
Other hydro-mechanical work tools
Cat's broader wheel-loader work-tool catalog (forks, grapples, hydraulic hammers, augers) exists for its construction-class loader lineup, but is not documented as a factory offering for the 994 series. This machine is marketed and equipped almost exclusively as a load-and-carry mining/quarry bucket loader.
Lift-arm / linkage configuration
Later 994-class machines (994H onward) offer up to four Z-bar linkage arrangements - standard, high lift, extended high lift, and super high lift - built on solid-steel arms with greased pins and automatic lubrication. Maximum-lift dump clearance across these options ranges from roughly 5.58 m to 7.08 m (19.2-23.3 ft), with extended high lift adding about 1.07 m (42 in) of clearance over high lift specifically for loading taller mining trucks; earlier generations offered fewer linkage choices, so confirm which options apply to the specific machine.
Original (pre-994D) bucket baseline
Period documentation for the first-generation 994 (introduced 1990) cites a standard bucket near 17.6 m3 (23 yd3) hauling loads up to about 31.8 t (70,000 lb) per pass. This predates the larger rock/coal bucket ranges above, which apply to the D/F/H/K generations - do not apply later capacity figures back onto the original machine without verification.
Tire and undercarriage configuration
Factory tire fitment for the class runs in the 49.5-57 to 53.5/85-57 size range depending on generation; larger tire sizes were phased in over the model's production life as suitable mining tires became available.
Engine / generation note
Confirmed engines by generation: 994D used a Cat 3516B (turbocharged/aftercooled), 994H used a Cat 3516B HD EUI, and 994K uses a Cat 3516E. Power and engine identity for the original base 994 (1989-1998, pre-994D) is not clearly documented in available sources - verify against the data plate or dealer records before assuming it matches later 3516-family ratings.
Operator and guarding options
Factory options for this class typically include cab guarding (FOPS/ROPS-rated structure) and heavy-duty debris/radiator guarding suited to mining and quarry environments, consistent with other large Cat mining wheel loaders in this size range.
All 994 assemblies by section
Every catalogued assembly group for the Caterpillar 994. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
7e-6731 Aftercooler Gp-Air
| 03***30 | Bolt-Self Locking; (5/16unc X 3/4) | 30 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 60 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
103-0876 Air Cleaner Gp
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 10***76 | Air Cleaner Group | 1 |
| 6I***05 | Filter Element As-Air; -Primary | 1 |
132-9371 Air Cleaner Gp
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 16 |
| 10***76 | Air Cleaner Group | 4 |
| 12***73 | Adapter-Air Cleaner | 4 |
9y-9206 Air Cleaner Gp
| 1P***90 | Gasket-Outlet; (Air Cleaner) | 4 |
| 1T***22 | Bolt-12 Point Head; (3/8-16x0.75-In)(Torsional Coupling To Flywheel) | 8 |
| 2K***73 | Locknut Inside Guard Assembly | 40 |
8n-4150 Air Cleaner Gp
| 6N***23 | Cup As-Air Cleaner | 1 |
| 6N***44 | Filter Element As-Air; (Secondary)(Secondary) | 1 |
| 6N***60 | Rod Assem. | 2 |
7e-7955 Cartridge Gp-Turbocharger
| 4M***13 | Ring,Retaining | 1 |
| 4N***97 | Bearing Assem. | 1 |
| 4P***03 | Housing As | 1 |
146-1748 Cartridge Gp-Turbocharger
| 14***48 | Cartridge Group-Turbocharger | 1 |
| 14***39 | Wheel-Compressor | 1 |
| 4M***13 | Ring,Retaining | 1 |
9y-9207 Dust Ejector Gp
| 11***14 | Plate As | 3 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 3 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 3 |
133-6598 Dust Ejector Gp
| 11***14 | Plate As | 3 |
| 11***69 | Pipe-Exhaust | 3 |
| 13***98 | Dust Ejector Group | 1 |
133-6503 Indicator Gp-Air Filter Change
| 13***03 | Indicator Group-Air Filter Change | 1 |
| 3B***52 | Elbow; --Cross To Hose Assembly To Air Gauge | 4 |
| 5K***68 | Fitting; (Pipe Hexagon) | 4 |
8x-8250 Indicator Gp-Air Filter Change
| 1P***86 | Adapter | 4 |
| 5P***00 | Connector-Air Brake | 4 |
| 5P***23 | Elbow; --90 Degrees-- Tube Assembly To Horn Valve | 4 |
6i-3833 Kit-Air Cleaner
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 10***65 | Guide-Element | 3 |
| 1P***90 | Gasket-Outlet; (Air Cleaner) | 1 |
133-6121 Lines Gp-Air
| 13***21 | Lines Group-Air | 1 |
| 16***79 | Tube As | 4 |
| 19***48 | Bracket As | 4 |
9y-9209 Lines Gp-Air
| 11***98 | Clamp As | 4 |
| 6B***02 | Gasket | 4 |
| 7E***12 | Tube | 4 |
7e-6696 Lines Gp-Air
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 28 |
| 10***43 | Tube-Flexible | 4 |
7e-6698 Manifold Gp-Exhaust
| 11***71 | Manifold-Exhaust; (Intermediate) | 8 |
| 11***72 | Manifold-Exhaust; (Front Rh) | 2 |
| 11***73 | Manifold-Exhaust; (Rh Rear, Lh Front) | 2 |
9y-9213 Muffler Gp
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 20 |
| 6V***75 | Bolt; (M12x1.75x35-mm) | 16 |
| 7E***91 | Muffler As | 4 |
133-6613 Precleaner Gp
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 13***13 | Precleaner Group | 1 |
| 1D***17 | Nut-Plate And Angle Assembly To Hydraulic And Fuel Tanks; Nut Plate And Angle Assembly To Hydraulic And Fuel Tanks | 1 |
207-2686 Precleaner Gp
| 14***53 | Precleaner Group | 4 |
| 20***86 | Precleaner Group | 1 |
7e-7583 Precleaner Gp
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 1D***17 | Nut-Plate And Angle Assembly To Hydraulic And Fuel Tanks; Nut Plate And Angle Assembly To Hydraulic And Fuel Tanks | 1 |
| 7E***83 | Precleaner Group | 1 |
146-8053 Precleaner Gp
| 13***81 | Precleaner As; -Air Cleaner, Cup, Bearing | 1 |
| 14***87 | Adapter As | 1 |
| 14***53 | Precleaner Group | 1 |
7n-5974 Precleaner Gp -Air Cleaner-Engine Air
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 2 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
7e-6694 Shield Gp-Exhaust
| 03***35 | Bolt-Locking; (5/16-18x0.625-In) | 165 |
| 1W***39 | Shield As-Manifold | 2 |
| 1W***41 | Shield As-Manifold | 2 |
9y-9204 Turbocharger Gp
| 1W***95 | Plate-Identification; (Turbocharger Cartridge) | 1 |
| 2A***62 | Screw,Cap,Hexagon H Diode Pig Tail To Grd; (1/4-20x.625 In) | 2 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 4 |
145-7998 Turbocharger Gp
| 14***98 | Turbocharger Group | 1 |
| 14***48 | Cartridge Group-Turbocharger | 1 |
| 2A***62 | Screw,Cap,Hexagon H Diode Pig Tail To Grd; (1/4-20x.625 In) | 4 |
7e-6695 Turbocharger Gp
| 12***36 | Gasket; (Turbocharger) | 4 |
| 14***98 | Turbocharger Group | 4 |
| 2N***65 | Bolt-High Temperature; (3/8-16x1.75-In) | 16 |
Basic Engine
6y-6697 Adapter Gp-Flywheel Housing
| 2B***47 | Bolt (1/2" X 2 1/4") Rops Mounting Bracket To Cover Assembly | 16 |
| 5D***23 | Seal (26.94" Inside Diameter) | 1 |
| 5P***24 | Bolt-Plt; (1/2unc X 2 1/4) | 2 |
117-0071 Air Compressor Gp
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 3 |
| 11***70 | Air Compressor Group | 1 |
| 11***71 | Air Compressor Group | 1 |
1w-8924 Air Compressor Gp
| 1D***40 | Bolt,Machine Fuel Filter Mounting | 2 |
| 1W***24 | Air Compressor Group | 1 |
| 2S***23 | Cover As; (Governor) | 1 |
2w-0582 Air Compressor Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 6 |
| 1W***30 | Pan | 1 |
117-0070 Air Compressor Gp
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 6 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 8 |
| 11***29 | Pan | 1 |
102-9793 Belt Tensioner Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
9y-8898 Belt Tensioner Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
4p-5222 Camshaft Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 11***08 | Plate | 2 |
| 12***94 | Washer As-Thrust | 2 |
7e-6820 Camshaft Gp -Single
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 4N***50 | Dowel; (1.25in X .376in) | 2 |
7w-1259 Camshaft Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 4N***50 | Dowel; (1.25in X .376in) | 2 |
7e-6714 Cover Gp-Cylinder Block
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 108 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
| 1N***14 | Cover-Cylinder Block Side | 16 |
7e-6711 Cover Gp-Flywheel Housing
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 39 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
2w-0202 Cover Gp-Front Housing
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 0S***92 | Bolt--Cover To Flywheel Housing | 2 |
| 10***85 | Cover As | 1 |
7n-1855 Cover Gp-Valve Mechanism
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
| 27***57 | Seal; (Valve Cover To Breather) | 1 |
| 2W***94 | Cover | 1 |
137-8204 Cover Gp-Valve Mechanism
| 13***04 | Cover Group-Valve Mechanism | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
| 27***57 | Seal; (Valve Cover To Breather) | 1 |
8n-0337 Crankshaft Gp
| 10***53 | Bearing-Main; (Crankshaft) | 9 |
| 10***54 | Bearing-Main; (0.63-mm Us) | 0 |
| 10***55 | Bearing-Main; (1.27-mm Us) | 0 |
7e-4937 Cylinder Block As
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
| 4W***14 | Adapter | 2 |
| 5P***49 | Washer (For Non-R.O.P.S. & Rollover Group) | 36 |
101-1242 Cylinder Block As
| 10***42 | Cylinder Block As | 1 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
| 5P***49 | Washer (For Non-R.O.P.S. & Rollover Group) | 36 |
101-1228 Cylinder Block As
| 10***28 | Cylinder Block As | 1 |
| 11***93 | Liner-Cylinder | 16 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
106-2780 Cylinder Block As
| 10***80 | Cylinder Block As | 1 |
| 22***96 | Cap-Crankshaft Bearing | 9 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 4 |
101-1173 Cylinder Block As
| 10***73 | Cylinder Block As | 1 |
| 21***26 | Liner-Cylinder Block | 16 |
| 22***96 | Cap-Crankshaft Bearing | 9 |
4p-7264 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 2 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 4 |
115-5156 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 16 |
7e-4668 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 2 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 4 |
101-1245 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 10***42 | Cylinder Block As | 1 |
| 10***45 | Cylinder Block Group | 1 |
7e-8420 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 16 |
115-5160 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 10***80 | Cylinder Block As | 1 |
| 11***60 | Cylinder Block Group | 1 |
7c-8147 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 16 |
131-4339 Cylinder Head As
| 13***13 | Guide-Valve; (Standard) | 4 |
| 13***11 | Cylinder Head As | 1 |
| 13***39 | Cylinder Head As | 1 |
172-0836 Cylinder Head As
| 13***07 | Insert-Valve Seat; (Standard)(Intake) | 2 |
| 13***08 | Insert-Valve Seat; (Standard)(Exhaust) | 2 |
| 14***81 | Insert-Valve Seat; (0.51-mm Os Od)(Intake) | 0 |
7e-8760 Cylinder Head As
| 11***91 | Insert-Valve Seat; (Exhaust) | 2 |
| 14***45 | Insert-Valve Seat; (0.508-mm Os Od)(Inlet) | 0 |
| 14***46 | Insert-Valve Seat; (Exhaust 0.51-mm Os Od)(Exhaust) | 0 |
131-0411 Cylinder Head As
| 13***07 | Insert-Valve Seat; (Standard)(Intake) | 2 |
| 13***08 | Insert-Valve Seat; (Standard)(Exhaust) | 2 |
| 13***11 | Cylinder Head As | 1 |
172-0838 Cylinder Head As
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 17***36 | Cylinder Head As | 1 |
7e-5859 Cylinder Head As
| 4D***14 | Plug .0625 In. (1.59 mm) Dia. | 1 |
| 7E***59 | Cylinder Head As | 1 |
| 7N***02 | Dowel | 2 |
7e-5861 Cylinder Head As
| 11***91 | Insert-Valve Seat; (Exhaust) | 2 |
| 3B***23 | Core Plug--Flywheel Housing Pinion Shaft Hole | 5 |
| 3B***45 | Plug Flywheel Housing Turbocharger Drain Hole | 5 |
156-9138 Cylinder Head As
| 13***11 | Cylinder Head As | 1 |
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
| 15***38 | Cylinder Head As | 1 |
156-9137 Cylinder Head Gp
| 12***39 | Valve-Exhaust | 2 |
| 13***11 | Cylinder Head As | 1 |
| 13***14 | Rotocoil As | 4 |
7e-8759 Cylinder Head Gp
| 12***39 | Valve-Exhaust | 2 |
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
7e-8758 Cylinder Head Gp
| 11***91 | Gasket-Cylinder Head | 1 |
| 13***20 | Fastener Group-Cylinder Head | 6 |
| 13***21 | Fastener Group-Cylinder Head | 2 |
4w-0095 Cylinder Head Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 11***91 | Gasket-Cylinder Head | 1 |
| 4W***95 | Cylinder Head Group; Cylinder Head Group | 1 |
172-0837 Cylinder Head Gp
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
| 13***56 | Seal; (Valve Stem)(Intake) | 2 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
4w-9560 Cylinder Head Gp
| 12***39 | Valve-Exhaust | 2 |
| 13***13 | Guide-Valve; (Standard) | 4 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
7e-6140 Damper Gp
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 10 |
| 7B***35 | Bolt, Bolt,Machine Grab Iron Mounting Applicable W/O Rops | 10 |
| 7C***65 | Damper As | 1 |
137-8192 Drive Gp-Accessory
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 12***00 | Bearing-Sleeve | 1 |
4p-0853 Drive Gp-Accessory -Upper, Rh-Alternator
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***00 | Bearing-Sleeve | 1 |
7e-7521 Drive Gp-Auxiliary -Lower, Lh
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
| 10***79 | Adapter As | 1 |
| 12***11 | Shaft As-Pump Drive | 1 |
102-9792 Drive Gp-Fan
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
| 10***93 | Pulley | 1 |
| 10***92 | Drive Group-Fan | 1 |
9y-8897 Drive Gp-Fan
| 03***37 | Bolt-Self Locking; 3.81cm(1.5 In.)Long | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
6i-1974 Drive Gp-Fan
| 03***37 | Bolt-Self Locking; 3.81cm(1.5 In.)Long | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
9y-9202 Flywheel Gp
| 5P***39 | Washer-Hard; (28x42x4-mm Thk) | 12 |
| 8N***96 | Gear (151 Teeth) | 1 |
| 9S***93 | Bolt-12 Point Head; (1-14x101.6-mm) | 12 |
8n-7174 Gear Gp-Front -Standard Rotation
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 5 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
116-9856 Gear Gp-Rear
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 10***65 | Plate-Thrust | 1 |
| 10***68 | Washer-Thrust; (19.50 X 106 X 1.9mm Thk) | 2 |
4w-5906 Gear Gp-Rear
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 12***50 | Bearing-Sleeve | 1 |
| 1A***22 | Bolt-Generator To Flywheel Housing | 4 |
7w-5780 Guard Gp-Belt -Alternator
| 27***35 | Spacer; (13.87x21.34x11-mm Thk) | 2 |
| 28***74 | Guard As-Alternator | 1 |
| 7W***80 | Guard Group-Belt; -Alternator | 1 |
4p-5219 Housing Gp-Flywheel
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 7 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 2 |
7e-9070 Housing Gp-Flywheel
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 7 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 2 |
| 1D***74 | Bolt (L.H. Side Flywheel Housing) | 8 |
105-4289 Housing Gp-Flywheel
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 7 |
| 10***67 | Adapter | 1 |
| 10***89 | Housing Group-Flywheel | 1 |
7w-3724 Housing Gp-Front -Accessory Drive
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 10***34 | Housing-Accessory Drive | 1 |
| 1D***93 | Bolt 5.5 In. (13.97 cm) Long | 10 |
7w-5949 Insert-Liner Seat
| 7W***49 | Insert-Liner Seat | 1 |
7e-2865 Kit-Insert -Cylinder Block
| 10***56 | Seal As-Water | 4 |
| 10***57 | Seal As-Water | 4 |
| 7E***65 | Kit-Insert; -Cylinder Block | 1 |
8n-7734 Lifting Gp-Engine
| 15***26 | Bracket As | 2 |
| 2B***95 | Cap Screw--Tube Assembly To Air Inlet Pipe | 4 |
| 5P***48 | Washer--Bracket To L.H. Support Rail | 4 |
2w-0194 Lines Gp-Air Compressor
| 03***69 | Elbow-Flared; (1/2-14 Nptf) | 5 |
| 06***17 | Elbow-Flared | 1 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 1 |
113-8162 Lines Gp-Air Compressor
| 03***69 | Elbow-Flared; (1/2-14 Nptf) | 6 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 1 |
| 10***34 | Grommet | 1 |
7e-4836 Mounting Gp-Alternator
| 05***65 | Sleeve | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 14***16 | Belt-Serpentine; (Alternator) | 1 |
7e-8536 Pan Gp-Oil -Front Sump
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
119-6297 Pan Gp-Oil
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 11***97 | Pan Group-Oil; -Front Sump | 1 |
6i-2861 Piston & Rod Gp
| 10***30 | Bearing-Connecting Rod; (Standard) | 1 |
| 10***31 | Bearing-Connecting Rod; (0.63-mm Us Id) | 0 |
| 10***32 | Bearing-Connecting Rod; (1.27-mm Us Id) | 0 |
7e-1038 Piston & Rod Gp
| 7C***08 | Rod As-Connecting; Rod As-Connection | 1 |
| 7C***09 | Bearing-Sleeve | 1 |
| 7C***10 | Pin-Piston | 1 |
121-2026 Piston & Rod Gp
| 10***81 | Rod As-Connecting | 1 |
| 10***30 | Bearing-Connecting Rod; (Standard) | 1 |
| 10***31 | Bearing-Connecting Rod; (0.63-mm Us Id) | 1 |
7e-1037 Piston Gp
| 4P***58 | Skirt-Piston | 1 |
| 7E***37 | Piston Group | 1 |
| 7W***21 | Ring; (Oil) | 1 |
7w-3813 Seal Gp-Crankshaft
| 11***32 | Seal Group-Crankshaft; (Cw Rotation) | 1 |
| 11***33 | Seal Group-Crankshaft; (Ccw Rotation) | 1 |
| 7W***13 | Seal Group-Crankshaft | 1 |
7n-7660 Drive Gp-Fan
| 5P***50 | Washer-Front Support Frame Assembly To | 6 |
| 7N***57 | Shaft-Stub | 1 |
| 7N***60 | Shaft Group-Stub; -Crankshaft Pulley | 1 |
7e-4722 Support Gp-Engine
| 1D***66 | Bolt Bracket Assembly To Yoke | 20 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 20 |
| 7E***21 | Support-Front | 1 |
9y-9212 Support Gp-Engine
| 2H***44 | Bolt; (1-14x2.25-In) | 24 |
| 3E***87 | Sleeve | 10 |
| 3E***88 | Washer; (32x144x12-mm Thk) | 10 |
4w-1035 Valve Mechanism Gp
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 12***81 | Bridge As | 2 |
| 15***84 | Pin-Spring | 1 |
Braking System
8x-0644 Accumulator & Mtg Gp-Brake
| 3G***78 | Accumulator Group-Brake; -Charged | 2 |
| 4J***22 | Seal-Interface Between 3rd & Tilt Valve | 2 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 4 |
3g-2869 Accumulator Gp-Brake -Charged
| 3G***69 | Accumulator Group; -Charged | 1 |
3g-0278 Accumulator Gp-Brake -Charged
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 3 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
4e-9826 Brake Gp-Mech Caliper Parking
| 1H***34 | Ring-Retaining; (External) | 1 |
| 4E***81 | Piston As | 1 |
| 4E***85 | Shaft-Governor Control | 1 |
4e-9827 Brake Gp-Parking
| 3B***17 | Pin,Cotter Governor And Decelerator Control | 2 |
| 3S***23 | Washer 5.7 cm(2.24 In.)O.D. | 8 |
| 4E***88 | Bracket-Caliper | 2 |
116-1339 Brake Gp-Parking
| 03***23 | Ring-Wear | 2 |
| 10***15 | Plate-Pressure | 1 |
| 10***19 | Plate-End | 1 |
103-8978 Brake Gp-Parking
| 03***23 | Ring-Wear | 2 |
| 10***15 | Plate-Pressure | 1 |
| 10***18 | Piston | 2 |
8x-1739 Control Gp-Foot Brake
| 10***62 | Bracket As | 1 |
| 1J***84 | Pin,Straight,Headed | 2 |
| 1T***20 | Bolt-12 Point Head; (3/8-16x1.25-In) | 2 |
152-8953 Control Gp-Parking Brake
| 12***39 | Guide As | 1 |
| 12***41 | Plate | 1 |
| 15***53 | Control Group-Parking Brake | 1 |
8x-1712 Control Gp-Parking Brake
| 1B***04 | Spacer; (6.8x10x9.5-mm Thk) | 2 |
| 1H***38 | Lockwasher, External Tooth (1/4); W/O Freespool Qty Is 6 | 2 |
| 1V***74 | Strip | 1 |
105-3155 Control Gp-Parking Brake
| 10***55 | Control Group-Parking Brake | 1 |
| 10***34 | Lever As-Brake | 1 |
| 10***98 | End-Yoke Rod | 1 |
8x-0015 Control Gp-Service Brake
| 1P***76 | Flange-Half (Hose To Pump); Flange-Half (32.54mm Bore) | 2 |
| 2R***39 | Clamp (3 Hole) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
8x-0645 Control Gp-Service Brake
| 0S***75 | Pin-To Arm Assembly And Retainer | 2 |
| 10***06 | Valve Group-Brake Control; -Service | 1 |
| 11***48 | Bracket | 1 |
153-3343 Control Gp-Service Brake
| 06***21 | Clevis (Rotochamber To Valve) | 1 |
| 15***43 | Control Group-Service Brake | 1 |
| 15***18 | Hose As | 1 |
173-5786 Control Gp-Service Brake
| 12***42 | Plate | 1 |
| 12***45 | Lever | 1 |
| 17***85 | Plate | 1 |
8x-1728 Lines Gp-Air Tank -Air Starting Motor, Rear
| 12***76 | Hose As | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 1 |
| 3B***52 | Elbow; --Cross To Hose Assembly To Air Gauge | 1 |
8x-1729 Lines Gp-Air Tank
| 03***77 | Tee-Pipe | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 2 |
| 2D***10 | Union 90 Degrees (.375" Ext. Thd.) | 1 |
105-3159 Lines Gp-Air Tank
| 00***33 | Tee-Pipe | 1 |
| 03***77 | Tee-Pipe | 1 |
| 10***59 | Lines Group-Air Tank | 1 |
122-4560 Lines Gp-Air Tank
| 12***60 | Lines Group-Air Tank | 1 |
| 4H***58 | Grommet Bracket Assembly To Dash | 3 |
| 4H***47 | Union; - Use When Relocating Air Override Valve To R.H. Side Panel If Equipped With Attachment Parking Brake Control | 2 |
138-4339 Lines Gp-Brake Cooling -Front Axle
| 11***74 | Bolt; (L=20mm) | 2 |
| 13***20 | Tube As | 1 |
| 13***21 | Tube As | 1 |
138-4340 Lines Gp-Brake Cooling -Rear Axle
| 11***74 | Bolt; (L=20mm) | 2 |
| 13***26 | Tube As | 1 |
| 13***27 | Tube As | 1 |
8x-1724 Lines Gp-Parking Brake
| 1S***15 | Conduit Clip (Use As Required) | 1 |
| 3E***03 | Adapter-Swivel-Orfs | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
8x-1723 Lines Gp-Parking Brake
| 3E***33 | Elbow-90 Degree | 1 |
| 3E***03 | Adapter-Swivel-Orfs | 2 |
| 6V***52 | Cap-Dust; (Fuel Supply Tee Connection) | 1 |
105-3147 Lines Gp-Parking Brake
| 10***47 | Lines Group-Parking Brake | 1 |
| 10***97 | Hose As | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
8x-1720 Lines Gp-Service Brake -Rear
| 2A***36 | Plate-Orifice | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 4 |
| 4J***67 | Packing,Preformed; Tube To Cylinder Uoc:Bsv,Bsx | 1 |
8x-1721 Lines Gp-Service Brake -Front
| 2P***93 | Locknut-Bulkhead; (1 3/16-12 Thd) | 1 |
| 4W***53 | Spacer; (13.5x25x38.1-mm Thk) | 1 |
| 5P***66 | Clip(Slot); (Slot) | 3 |
152-8971 Lines Gp-Service Brake -Front
| 13***24 | Tube As | 1 |
| 13***25 | Tube As | 1 |
| 14***15 | Connector As | 2 |
8x-1719 Lines Gp-Service Brake
| 2M***80 | Seal--To Connector Pump Outlet | 4 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 3E***12 | Connector | 1 |
8x-1722 Lines Gp-Service Brake -Rear
| 3P***04 | Clip 44.45 mm (1.75 In.) | 1 |
| 4J***20 | Seal (For Tilt Ports On Valve) | 1 |
| 4J***67 | Packing,Preformed; Tube To Cylinder Uoc:Bsv,Bsx | 2 |
8x-0083 Pump & Mtg Gp-Brake
| 10***26 | Pump Group-Piston; -Brake | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
116-7341 Pump Gp-Gear
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 8 |
| 11***75 | Kit-Seal; (Gear Pump) | 1 |
6e-0869 Pump Gp-Gear
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
| 11***75 | Kit-Seal; (Gear Pump) | 1 |
102-4226 Pump Gp-Piston -Brake
| 00***00 | Ring-Snap | 2 |
| 10***13 | Seal-Shaft | 1 |
| 10***26 | Pump Group-Piston; -Brake | 1 |
164-3306 Screen Gp-Hydraulic -Brake Cooling
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 16***06 | Screen Group-Hydraulic; -Brake Cooling | 1 |
| 9T***64 | Kit-Screen | 1 |
7i-5908 Shield Gp-Parking Brake
| 10***81 | . Body, Guard As | 1 |
| 10***82 | Shield As | 1 |
| 10***83 | Bracket As | 2 |
8x-0045 Tank Gp-Air
| 10***51 | Strap As | 1 |
| 4E***99 | Plate | 4 |
| 5G***73 | Lug | 3 |
4d-0487 Valve As-Check
| 4D***87 | Valve As-Check; -Air Supply-Primary Air Tank-Service Brake Control | 1 |
8j-8327 Valve Gp-Brake Control
| 3S***50 | Seal (.624" Inside Diameter) | 2 |
| 4J***33 | Seal Fuel Injection Pump | 1 |
| 6F***72 | Seal (.674" Inside Diameter) | 2 |
6e-0870 Valve Gp-Brake Control -Service
| 2J***26 | Seal-O-Ring (Id=39.27mm) | 1 |
| 2J***64 | Plug-Drain; (Hydraulic Filter Bypass) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
3g-2228 Valve Gp-Brake Control -Parking
| 2K***99 | Seal-Interface Between Inlet Manifold | 2 |
| 2L***26 | Ring-Retaining | 1 |
| 3G***28 | Valve Group-Brake Control; -Parking | 1 |
100-3706 Valve Gp-Brake Control -Service
| 10***06 | Valve Group-Brake Control; -Service | 1 |
| 10***07 | Spring | 1 |
| 10***08 | Spring | 1 |
5d-0470 Valve Gp-Quick-Release
| 11***37 | Valve-Quick-Release | 1 |
| 5D***70 | Valve Group-Quick Release; -Parking Brake-Air | 1 |
4t-1909 Valve Gp-Pump Control -Pressure Compensator-Brake
| 3G***23 | Spring | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 1 |
| 4T***09 | Valve Group-Servo; -Pressure Compensator-Brake | 1 |
7t-9074 Valve Gp-Solenoid
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
188-9250 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 18***50 | Valve Group-Solenoid | 1 |
6e-0872 Valve Gp-Tmsn Neutralizer Cont
| 1J***93 | Plug 2.54 cm(1 In.) Long | 1 |
| 3H***61 | Seal-O-Ring; (34.52mm Id) | 2 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
Cooling System
7e-9414 Connection Gp-Water
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
4w-5891 Cooler Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 10***32 | Seal-O-Ring | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 6 |
100-8007 Cooler Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 10***07 | Cooler Group-Engine Oil | 1 |
| 10***08 | Core Group-Engine Oil Cooler | 1 |
100-8008 Core Gp-Engine Oil Cooler
| 10***08 | Core Group-Engine Oil Cooler | 1 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
| 9S***85 | Plug--To Seal Hydraulic Pump To Sump Of Limit System | 1 |
9y-8890 Core Gp-Oil Cooler -Brake Cooling
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 2 |
| 9S***91 | Plug,Machine Thread Fuel Injection Pump | 2 |
| 9Y***90 | Core Group-Oil Cooler; -Brake Cooling | 1 |
4p-7073 Fan Gp-Blower
| 10***17 | Guard As-Fan | 4 |
| 11***77 | Spider As-Fan; (11-Blade) | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 8 |
156-7013 Field Upgrade Kit-Radiator
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
| 12***83 | Condenser & Mtg Group-Refrigerant | 1 |
| 12***84 | Cooler Group-Hydraulic Oil | 1 |
6v-6704 Gauge Gp-Coolant Level
| 10***84 | Dial | 1 |
| 2F***06 | Screw-Machine (6-32x. 25in); (6-32x0.25-In) | 1 |
| 6V***04 | Gauge Group-Coolant Level; -Engine, Aftercooler | 1 |
183-7142 Gauge Gp-Coolant Level
| 10***84 | Dial | 1 |
| 18***42 | Gauge Group-Coolant Level; -Engine, Aftercooler | 1 |
| 1W***01 | Gasket | 1 |
7e-6733 Housing & Regulator Gp
| 3S***43 | Seal-Lip Type; (Water Temperature Regulator) | 2 |
| 4M***36 | Sleeve,Compression, Housing | 2 |
| 6I***52 | Regulator-Water Temperature; (51-Deg C) | 1 |
2w-3707 Lines Gp-Water -Turbo
| 03***70 | Tee | 4 |
| 06***08 | Bulkhead Tee | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
4p-8488 Lines Gp-Water
| 1S***09 | Elbow | 1 |
| 2N***33 | Elbow | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
105-4330 Lines Gp-Water
| 10***20 | Mat; Floor, Bracket As | 1 |
| 10***03 | Bracket As | 1 |
| 10***77 | Bonnet | 1 |
103-0888 Lines Gp-Water -Lower
| 03***67 | Connector-Flared -- Adapter To Hose As. | 2 |
| 03***68 | Elbow (For Use With Shallow Pan) | 2 |
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 2 |
152-8926 Lines Gp-Water
| 15***26 | Lines Group-Water | 1 |
| 15***53 | Tube | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
7w-0486 Lines Gp-Water -Bypass
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 9 |
2w-3705 Lines Gp-Water -Upper
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 40 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 60 |
| 12***56 | Gasket | 2 |
7e-6729 Lines Gp-Water
| 03***67 | Connector-Flared -- Adapter To Hose As. | 2 |
| 03***68 | Elbow (For Use With Shallow Pan) | 2 |
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 2 |
2w-0211 Lines Gp-Water -Aftercooler
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 1A***64 | Bolt (4.75 In. Long-Location "B") | 2 |
| 1W***72 | Retainer-Ring To Pump Flange | 4 |
153-3350 Mounting Gp-Radiator
| 10***50 | Film-Stripe; (994) | 1 |
| 10***51 | Film-Stripe; (994) | 1 |
| 10***57 | Film; (192 cm) | 0 |
1w-0410 Pump Gp-Auxiliary Water
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
| 1T***65 | Bolt 2.54 cm (1" Long) | 1 |
| 1W***10 | Pump Group-Auxiliary; -Aftercooler | 1 |
7e-9781 Pump Gp-Auxiliary Water
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***00 | Bearing-Sleeve | 1 |
212-8169 Pump Gp-Auxiliary Water -Fresh Water
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***00 | Bearing-Sleeve | 1 |
| 21***69 | Pump Group-Auxiliary Water; -Fresh Water | 1 |
122-0500 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 12***50 | Seal Group-Face; (Water Pump) | 1 |
| 12***00 | Pump Group-Water | 1 |
166-4378 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 16***74 | Ring As | 1 |
| 16***76 | Seal Group-Water Pump; (Face Type) | 1 |
2w-9729 Pump Gp-Water
| 16***78 | Pump Group-Water; -Jacket Water | 1 |
| 1H***78 | Seal-O-Ring | 1 |
| 2W***29 | Pump Group-Water; Water Pump Group | 1 |
2w-9728 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 16***76 | Seal Group-Water Pump; (Face Type) | 1 |
| 19***21 | Kit-Gasket; (Water Pump Rebuild) | 0 |
152-8927 Radiator Gp
| 10***22 | Baffle As-Fan | 4 |
| 10***25 | Stabilizer As | 2 |
| 10***72 | Hose; (Radiator) | 17 |
4p-5713 Radiator Gp
| 1S***86 | Stud-Taperlock-Radiator Cap | 2 |
| 1W***01 | Gasket | 2 |
| 2F***06 | Screw-Machine (6-32x. 25in); (6-32x0.25-In) | 2 |
179-3640 Radiator Gp
| 10***22 | Baffle As-Fan | 4 |
| 10***25 | Stabilizer As | 2 |
| 10***72 | Hose; (Radiator) | 17 |
179-3641 Radiator Gp
| 13***59 | Cover | 2 |
| 13***92 | Baffle | 8 |
| 17***41 | Radiator Group | 1 |
129-0688 Radiator Gp
| 11***86 | Retainer | 18 |
| 12***43 | Seal-Rubber; (212cm) | 0 |
| 12***88 | Radiator Group | 1 |
9y-9211 Radiator Gp
| 1F***39 | Lug (3/8-16 Thd) | 3 |
| 4P***50 | Tank As-Top | 1 |
| 4P***51 | Tank As-Center | 1 |
7w-0942 Housing & Regulator Gp -Outlet Control
| 11***74 | Valve As-Vent Line | 1 |
| 12***33 | Housing As-Regulator | 1 |
| 24***13 | Regulator-Water Temperature; (92-Deg C)(Water, Coolant Temperature) | 4 |
152-8951 Shroud Gp-Radiator
| 10***66 | Block | 2 |
| 13***85 | Cover As | 2 |
| 13***87 | Cover As | 2 |
Electrical And Starting System
3e-6934 Sensor Gp-Pressure
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 3E***71 | Wedge; (Receptacle Lock) (3 Pin) | 1 |
| 3E***34 | Sensor Group-Pressure; -Lift Cylinder, Tilt Cylinder | 1 |
100-4311 Sensor Gp-Pressure
| 10***11 | Sensor Group-Pressure | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
164-3692 Sensor Gp-Pressure
| 16***92 | Sensor Group-Pressure; -Engine Oil | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
102-1400 Sensor Gp-Pressure
| 10***00 | Sensor Group-Pressure; -Automatic Lubrication | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
107-3952 Sensor Gp-Pressure
| 10***52 | Sensor Group-Pressure; (Oil Pressure)(Cms Unfiltered Sensor) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
141-5746 Sensor Gp-Pressure
| 14***46 | Sensor Group-Pressure; -Air Start Lines | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
3e-3530 Sensor Gp-Pressure
| 3E***30 | Sensor Group-Pressure; (Eng Oil Press) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
4w-6634 Starting Motor Gp-Air
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 1 |
7c-3372 Starting Motor Gp-Air
| 03***17 | Washer-Spring | 2 |
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 1 |
| 11***99 | Housing-Motor | 1 |
9y-0646 Starting Motor Gp-Air -Turbine
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 1W***54 | Cover | 1 |
| 4B***43 | Bolt -Cover To Flywheel Housing | 3 |
105-4326 Starting Motor Gp-Air -Turbine
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 10***24 | Starting Motor Group-Air; (Turbine) | 1 |
| 10***26 | Starting Motor Group-Air; -Turbine | 1 |
9y-0647 Starting Motor Gp-Air
| 9Y***47 | Starting Motor Group-Air | 1 |
4w-6633 Starting Motor Gp-Air -Vane
| 03***17 | Washer-Spring | 2 |
| 11***99 | Housing-Motor | 1 |
| 1L***97 | Ring-Snap; (External) | 1 |
6v-0513 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
6v-0889 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
3t-5831 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 1 |
6t-0643 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 1 |
1w-6363 Starting Motor Gp-Electric
| 11***91 | Cable As | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1W***63 | Starting Motor Group-Electric | 1 |
101-8352 Air Dryer Gp
| 10***52 | Air Dryer Group | 1 |
| 10***69 | Cartridge-Desiccant | 1 |
| 12***95 | Kit-Purge Valve; (Air Dryer) | 1 |
8x-0020 Air Dryer Gp
| 11***35 | Valve-Check | 1 |
| 12***51 | Ring | 1 |
| 14***77 | Valve-Air Relief | 1 |
101-8346 Air Dryer Gp
| 10***46 | Air Dryer Group | 1 |
| 10***52 | Air Dryer Group | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 4 |
9g-9813 Alarm Gp -Action
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
316-7251 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
9x-7803 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 4 |
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
8x-3530 Battery & Wiring Gp
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 3 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 2 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 4 |
8x-0048 Battery & Wiring Gp
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 1M***43 | Grommet | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 2 |
108-8167 Battery Gp
| 10***00 | Battery | 6 |
| 10***67 | Battery Group | 1 |
108-8169 Battery Gp
| 10***00 | Battery | 4 |
| 10***69 | Battery Group | 1 |
108-8165 Battery Gp
| 10***00 | Battery | 2 |
| 10***65 | Battery Group | 1 |
108-8164 Battery Gp
| 10***00 | Battery | 2 |
| 10***64 | Battery Group | 1 |
9w-0742 Block Gp-Junction -Battery
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
| 8C***58 | Block Group-Junction; (Battery) | 1 |
126-0182 Buffer Gp-Sensor -Fuel Level
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***82 | Buffer Group-Sensor; -Fuel Level | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
8x-0014 Control Gp-Air Starting
| 00***54 | Nipple-Pipe | 1 |
| 03***66 | Adapter-Special | 2 |
| 11***90 | Valve Group-Relay; (Air Starting Motor)(Air Start) | 1 |
8x-6016 Control Gp-Air Starting
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 00***54 | Nipple-Pipe | 1 |
| 03***66 | Adapter-Special | 2 |
7t-1390 Control Gp-Relay
| 5P***32 | Screw-Washer Head; 4.76mm(.187in)Long | 2 |
| 6T***59 | Grommet | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
9x-5698 Control Gp-Ether Electronic
| 9X***42 | Film-Identification | 1 |
| 9X***03 | Control Group-Electronic | 1 |
| 9X***98 | Control Group-Electronic | 1 |
9x-9827 Control Gp-Engine Overspeed
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 8 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 8 |
| 9G***69 | Housing As. 8 Pin. Including;- | 1 |
3e-3777 Control Gp-Ether Electronic
| 3E***77 | Control Group-Electronic | 1 |
| 3E***78 | Control Group-Electronic | 1 |
| 3E***79 | Film-Identification | 1 |
9x-5303 Control Gp-Ether Electronic
| 9X***03 | Control Group-Electronic | 1 |
9g-9287 Control Gp-Engine Electronic -Engine Shutdown
| 1S***93 | Strap; (Cable) (0.62in Dia) | 3 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 4 |
132-3815 Control Gp-Engine Overspeed
| 13***15 | Control Group-Engine Overspeed | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 7 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 8 |
7t-3821 Control Gp-Engine Overspeed
| 13***15 | Control Group-Engine Overspeed | 1 |
| 7T***21 | Control Group-Engine Overspeed | 1 |
3e-6030 Control Gp-Torque Conv Elek
| 3E***30 | Control Group-Torque Conv Elek | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 6 |
160-1758 Control Gp-Unprogrammed -Power Train
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 16***58 | Control Group-Unprogrammed; -Steering-Power Train | 1 |
| 6V***03 | Kit; (Retaining Bolt) (Each Includes Bolt, Retaining Ring And 4 O-Ring Seals) | 2 |
7v-8422 Converter Gp-Electrical
| 4B***71 | Washer Pump Mounting Plate To Adjusting Strap | 4 |
| 5S***79 | Hex Head Capscrew, 3/8 Nc X 7/8 In. (22 mm) | 4 |
| 7V***22 | Converter Group-Electrical | 1 |
169-1538 Electronics Gp-Monitor
| 16***38 | Electronics Group-Monitor | 1 |
| 18***12 | Software Group-Monitor; (Vims) | 1 |
| 19***28 | Software Group-Monitor; -Vims | 1 |
160-4739 Electronics Gp-Monitor -Vims-English, Spanish
| 16***39 | Electronics Group-Monitor; -Vims-English, Spanish-High Lift Machines | 1 |
| 18***08 | Software Group-Monitor; (Vims) | 1 |
| 19***28 | Software Group-Monitor; -Vims | 1 |
184-4383 Electronics Gp-Monitor
| 18***54 | Software Group-Monitor; (Vims-English, Swedish) | 1 |
| 18***83 | Electronics Group-Monitor | 1 |
| 19***28 | Software Group-Monitor; -Vims | 1 |
169-1537 Electronics Gp-Monitor
| 16***37 | Electronics Group-Monitor | 1 |
| 18***34 | Software Group-Monitor; (Vims) | 1 |
| 19***28 | Software Group-Monitor; -Vims | 1 |
169-1545 Electronics Gp-Monitor
| 16***45 | Electronics Group-Monitor | 1 |
| 18***11 | Software Group-Monitor; (Vims) | 1 |
| 19***28 | Software Group-Monitor; -Vims | 1 |
160-4740 Electronics Gp-Monitor -Vims-English Spanish-Standard Lift Machines
| 16***40 | Electronics Group-Monitor; -Vims-English Spanish-Standard Lift Machines | 1 |
| 18***09 | Software Group-Monitor; (Vims) | 1 |
| 19***28 | Software Group-Monitor; -Vims | 1 |
169-1618 Electronics Gp-Monitor
| 16***18 | Electronics Group-Monitor | 1 |
| 18***10 | Software Group-Monitor; (Vims) | 1 |
| 19***28 | Software Group-Monitor; -Vims | 1 |
184-4382 Electronics Gp-Monitor
| 18***53 | Software Group-Monitor; (Vims-English, Swedish) | 1 |
| 18***82 | Electronics Group-Monitor | 1 |
| 19***28 | Software Group-Monitor; -Vims | 1 |
164-5965 Electronics Gp-Power Train
| 16***65 | Electronics Group-Power Train | 1 |
| 22***45 | Software Group-Power Train | 1 |
8x-0118 Heater Gp-Engine Oil
| 8X***18 | Heater Group-Engine Oil | 1 |
| 9W***97 | Switch As-Temperature; (Engine Oil) | 1 |
| 9X***51 | Housing As | 1 |
8x-0117 Heater Gp-Fuel
| 06***93 | Bushing-Reducer; (1/2-14 Nptf) | 3 |
| 6B***81 | Bushing; (Reducing) | 1 |
| 6V***46 | Seal-O-Ring | 2 |
7e-6713 Heater Gp-Jacket Water
| 6N***04 | Cap As-Dust; (Jacket Water Heater Elements) | 4 |
| 6V***50 | Seal-O-Ring; (23.47mm Id) | 1 |
| 7E***13 | Heater Group-Jacket Water | 1 |
9x-6775 Lamp Gp-Flood
| 10***52 | Seal | 1 |
| 10***53 | Lens As; (Floodlight) | 1 |
| 10***54 | Body As; (Lamp) | 1 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
7x-6066 Lamp Gp-Signal
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
107-2282 Lamp Gp-Signal
| 10***82 | Lamp Group-Signal; -Vims Service Indicator | 1 |
| 10***83 | Lens-Blue; (Vims Service Indicator) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
8c-6207 Lamp Gp-Stop & Tail -Stop, Tail, Red
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***82 | Housing (Plug) (To Lift Kickout Switch) | 1 |
8x-0034 Lighting Gp-Engine
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
| 8T***36 | Capscrew; (Hex Hd) (M10 X 1.50 X 25l Gr 10.9) | 2 |
8x-0035 Lighting Gp-Front
| 11***87 | Support As | 2 |
| 11***88 | Guard As | 2 |
| 2D***90 | Grommet | 2 |
8x-0129 Lighting Gp-Front
| 06***44 | Grommet | 2 |
| 4D***94 | Clip-- Compressor Clutch Wire To Compressor Body | 6 |
| 5P***97 | Clip (9.52mm Id); (9.52mm Dia) | 11 |
7i-5906 Lighting Gp-Front
| 10***87 | Bracket As | 2 |
| 7I***06 | Lighting Group-Front | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 6 |
7i-5896 Lighting Gp-Platform
| 10***18 | Bracket | 2 |
| 5L***41 | Spacer; (0.6-In Thk) | 2 |
| 7I***96 | Lighting Group-Platform | 1 |
8x-1742 Lighting Gp-Rear
| 4W***18 | Angle | 2 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 4 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
8x-0036 Lighting Gp-Rear
| 6V***89 | Locknut; (M8x1.25-Thd) | 6 |
| 8C***78 | Stud-Weld; (M8x1.25x25-mm Oal) | 2 |
| 8R***11 | Cover Assem. | 2 |
8x-1743 Lighting Gp-Rops
| 4W***18 | Angle | 2 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 6 |
8x-1744 Lighting Gp-Signal
| 2H***23 | Grommet (1.375" Inside Diameter) | 2 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 12 |
| 5P***31 | Grommet | 4 |
8x-0037 Lighting Gp-Stop
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 6 |
| 8C***07 | Lamp Group-Signal; (Stop, Tail, Red)(Stop/Tail Red) | 2 |
| 8T***05 | Washer, Flat-Thin(1/4); W/O Freespool Qty Is 12 | 6 |
122-4561 Lines Gp-Air Tank
| 00***33 | Tee-Pipe | 1 |
| 03***77 | Tee-Pipe | 1 |
| 12***61 | Lines Group-Air Tank | 1 |
141-7106 Lubricator Gp-Air Motor
| 14***06 | Lubricator Group-Air Motor | 1 |
| 18***80 | Kit-Seal; (Air Motor Lubricator) | 0 |
172-0208 Lubricator Gp-Air Motor
| 17***08 | Lubricator Group-Air Motor | 1 |
| 18***80 | Kit-Seal; (Air Motor Lubricator) | 1 |
144-7172 Module Gp-Vids/Vims Interface
| 14***72 | Module Group-Vids/Vims Interface | 1 |
| 9X***47 | Film-Identification; (Vids/Vims Interface Module) | 1 |
256-3217 Mounting Gp-Sensor
| 25***17 | Mounting Group-Sensor | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 3E***45 | Tee-O-Ring | 1 |
157-3902 Mounting Gp-Wiring
| 13***18 | Plate | 2 |
| 15***44 | Plate | 1 |
| 15***02 | Mounting Group-Wiring | 1 |
153-0509 Sender Gp-Fuel Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***67 | Kit-Level Sender | 1 |
| 15***09 | Sender Group-Fuel Level | 1 |
109-4367 Sensor Gp-Exhaust Temperature
| 10***67 | Sensor Group-Exhaust Temperature; -Turbocharger Inlet | 1 |
| 26***47 | Adapter | 1 |
| 26***48 | Sensor Group-Exhaust Temperature | 1 |
266-1484 Sensor Gp-Position -Rotary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 26***84 | Sensor Group-Position; -Rotary | 1 |
219-2386 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***32 | Sensor As-Position; (Articulation Angle) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
121-0284 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***84 | Sensor Group-Position; -Tilt Linkage | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
161-8904 Sensor Gp-Position -Rear Steer-Lift
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***04 | Sensor Group-Position; -Rear Steer-Lift | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
2w-8918 Sensor Gp-Speed
| 17***49 | Strap; (Marker) | 1 |
| 2W***18 | Sensor Group-Speed; -Engine Timing | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
118-3909 Sensor Gp-Temperature
| 11***09 | Sensor Group-Temperature; -Ambient Air | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
100-3055 Sensor Gp-Temperature
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
7w-3555 Shutoff Gp-Electrical
| 2W***38 | Screw-Forming; (1/4-20x25.4mm) | 3 |
| 2W***33 | Gasket-Shutdown | 1 |
| 2W***07 | Washer; (5.16x11.13x0.81-mm Thk) | 2 |
180-5319 Software Gp-Monitor
| 18***19 | Software Group-Monitor | 1 |
180-5326 Software Gp-Monitor
| 18***26 | Software Group-Monitor | 1 |
180-5323 Software Gp-Monitor
| 18***23 | Software Group-Monitor | 1 |
199-6528 Software Gp-Monitor -Vims
| 19***28 | Software Group-Monitor; -Vims | 1 |
188-7100 Software Gp-Monitor
| 18***00 | Software Group-Monitor | 1 |
180-5318 Software Gp-Monitor
| 18***18 | Software Group-Monitor | 1 |
188-7102 Software Gp-Monitor
| 18***02 | Software Group-Monitor | 1 |
169-5407 Software Gp-Power Train
| 16***07 | Software Group-Power Train | 1 |
3t-4704 Solenoid As-Starting Motor
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
| 31***82 | Solenoid As-Starting Motor; (24-Volt) | 1 |
| 3T***04 | Solenoid As-Starter; (24-Volt) | 1 |
7t-8854 Solenoid As-Starting Motor
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
| 31***82 | Solenoid As-Starting Motor; (24-Volt) | 1 |
| 3B***02 | Washer,Lock Circuit Breaker Uoc:Bsv,Bsx | 2 |
113-9057 Starting Aid Gp-Ether
| 11***57 | Starting Aid Group-Ether | 1 |
| 11***60 | Bracket As | 1 |
| 11***66 | Harness As | 1 |
8x-0012 Starting Aid Gp-Ether
| 3B***68 | Bushing,Pipe Shutoff Valve Cock Mounting | 4 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 6 |
| 5P***30 | Tube-Ether Fitting To Manifold (8 Dm) | 0 |
8x-3536 Starting Aid Gp-Ether
| 05***31 | Grommet | 1 |
| 2D***51 | Grommet; (Water Temperature Gage) | 1 |
| 2H***22 | Lockwasher | 1 |
8x-0113 Starting Ar
| 7E***13 | Heater Group-Jacket Water | 1 |
| 8X***13 | Starting Ar | 1 |
| 8X***17 | Heater Group-Fuel | 1 |
8x-1765 Starting Ar-Air
| 10***14 | Mounting Group-Platform Bracket | 1 |
| 12***54 | Platform Ar | 1 |
| 4W***34 | Starting Motor Group-Air; -Vane | 1 |
117-5253 Starting Ar-Air
| 10***26 | Starting Motor Group-Air; -Turbine | 1 |
| 10***14 | Mounting Group-Platform Bracket | 1 |
| 11***53 | Starting Ar-Air | 1 |
8x-1766 Starting Ar-Air
| 10***14 | Mounting Group-Platform Bracket | 1 |
| 12***54 | Platform Ar | 1 |
| 5P***66 | Clip(Slot); (Slot) | 2 |
8x-0111 Starting Ar-Electric
| 10***68 | Mounting Group-Battery | 1 |
| 12***77 | Platform Ar | 1 |
| 1W***63 | Starting Motor Group-Electric | 1 |
105-8827 Suppressor Gp-Electronic
| 10***27 | Suppressor Group-Electronic; -Air Conditioner Compressor | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
7n-8001 Switch Gp-Toggle
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 2 |
| 6T***31 | Nut-Hexagon-(15/32-32 Thd) | 2 |
| 6T***32 | Lockwasher 15.08mm(.59in.)O.D. | 1 |
3e-7868 Switch Gp-Bypass -Transmission Filter-Filter
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 3E***68 | Switch Group; -Transmission Filter-Filter | 1 |
| 4B***43 | Nut,Plain,Hexagon Plate Mtg | 2 |
7i-5894 Switch Gp-Bumper
| 2A***10 | Harness As | 1 |
| 4D***36 | Switch As-Toggle; (Engine Protection Override) | 1 |
| 6V***67 | Lockwasher; (18.19x29.16x1.17mm Thk) | 1 |
2a-7071 Switch Gp-Bumper
| 2A***71 | Switch Group-Bumper | 1 |
| 2A***10 | Harness As | 1 |
| 4D***36 | Switch As-Toggle; (Engine Protection Override) | 1 |
9x-7781 Switch Gp-Bypass
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 4B***43 | Nut,Plain,Hexagon Plate Mtg | 2 |
| 4B***63 | Washer; (4.7x11x1.2-mm Thk) | 2 |
164-7577 Switch Gp-Bypass
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
1n-4647 Switch Gp-Flow -Coolant
| 17***10 | Switch Group-Flow; -Coolant | 1 |
| 1N***47 | Switch Group-Flow | 1 |
| 2B***95 | Cap Screw--Tube Assembly To Air Inlet Pipe | 2 |
171-8710 Switch Gp-Flow
| 17***10 | Switch Group-Flow; -Coolant | 1 |
172-8660 Switch Gp-Liquid Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
7e-8098 Thermocouple Gp
| 5N***26 | Connector; Adapter-.25in Pipe Thread | 1 |
| 6K***79 | Clip; (4.76mm Id) | 1 |
| 7E***30 | Thermocouple | 1 |
8x-0047 Warning Gp-Backup
| 3T***15 | Alarm Group; (Backup)(Back-Up) | 2 |
| 4D***94 | Clip-- Compressor Clutch Wire To Compressor Body | 2 |
| 4V***94 | Cover | 2 |
8x-1768 Wiring Gp-Aux Start Receptacle
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 2 |
| 2G***67 | Washer; (10.5x60x3-mm Thk) | 24 |
| 2L***73 | Fitting; (Rubber)(Used Only On Positive Pole) | 3 |
164-7654 Wiring Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
105-3157 Wiring Gp-Cab
| 03***55 | Screw; (1/4-20x1-In)(1/4-20x1in) | 2 |
| 10***35 | Harness As | 1 |
| 10***57 | Wiring Group-Cab | 1 |
169-1531 Wiring Gp-Cab
| 09***49 | Bolt; (M8x1.25x40-mm) | 4 |
| 0S***70 | Cap Screw (5/8" Long) | 1 |
| 10***66 | Bezel | 1 |
169-1541 Wiring Gp-Cab
| 0S***70 | Cap Screw (5/8" Long) | 1 |
| 10***66 | Bezel | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
8x-0628 Wiring Gp-Cab
| 03***55 | Screw; (1/4-20x1-In)(1/4-20x1in) | 2 |
| 2M***04 | Screw-Machine | 6 |
| 2V***10 | Spacer 5t***53 Cable As To 5t***18 Lever | 1 |
169-1620 Wiring Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
152-8935 Wiring Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
152-8933 Wiring Gp-Chassis
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
8x-8498 Wiring Gp-Chassis
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 03***25 | Terminal-Ring; (For 3/8" Fastener) | 1 |
| 10***38 | . Link, Harness As | 1 |
8x-1733 Wiring Gp-Chassis
| 03***25 | Terminal-Ring; (For 3/8" Fastener) | 1 |
| 1P***10 | Tape (Order By The Meter) (Use As | 0 |
| 2L***73 | Fitting; (Rubber)(Used Only On Positive Pole) | 1 |
271-1334 Wiring Gp-Chassis -Field Installation, Front
| 27***34 | Wiring Group-Chassis; -Field Installation, Front | 1 |
| 27***35 | Harness As-Chassis; (Field Installation) | 1 |
| 27***43 | Bracket As | 1 |
169-1619 Wiring Gp-Chassis
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
169-1540 Wiring Gp-Chassis
| 03***28 | Grommet | 1 |
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
8x-1734 Wiring Gp-Electronic Control
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 1H***93 | Lockwasher (External Tooth) | 26 |
8x-8496 Wiring Gp-Electronic Control
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***01 | Panel As | 1 |
| 10***03 | Plate As | 1 |
122-4559 Wiring Gp-Electronic Control
7i-5887 Wiring Gp-Engine
8x-0051 Wiring Gp-Engine
7i-5907 Wiring Gp-Front
169-1532 Wiring Gp-Front
218-4103 Wiring Gp-Front
8x-0049 Wiring Gp-Front
152-8938 Wiring Gp-Front
8x-6018 Wiring Gp-Heater
169-1543 Wiring Gp-Platform
8x-8497 Wiring Gp-Platform
169-1622 Wiring Gp-Platform
169-1533 Wiring Gp-Platform
122-4574 Wiring Gp-Platform
8x-4837 Wiring Gp-Platform
152-8939 Wiring Gp-Platform
122-4576 Wiring Gp-Platform
8x-0050 Wiring Gp-Rear
7i-5888 Wiring Gp-Rear
164-7660 Wiring Gp-Rear
8x-9461 Wiring Gp-Rops
160-6428 Wiring Gp-Rops
8x-0052 Wiring Gp-Transmission
8x-8499 Wiring Gp-Transmission Control
Engine Arrangement
9y-9200 Engine Ar
| 10***07 | Cooler Group-Engine Oil | 1 |
| 10***92 | Drive Group-Fan | 1 |
| 10***93 | Belt Tensioner Group | 1 |
Frame And Body
7i-5885 Bumper & Drawbar Ar
| 5P***02 | Padlock Group; (Includes: Battery Compartments, Platform Compartments, Radiator Access Door, Firewall Doors) | 2 |
| 7I***71 | Bumper & Drawbar Group | 1 |
| 7I***72 | Tank Group-Fuel; -Center | 1 |
8x-0019 Bumper & Drawbar Gp
| 02***34 | Coupling | 1 |
| 03***07 | Elbow-Hose | 2 |
| 2G***00 | Valve As-Tank | 1 |
7i-5671 Bumper & Drawbar Gp
| 02***34 | Coupling | 1 |
| 03***07 | Elbow-Hose | 2 |
| 10***81 | Tread As-Lh | 1 |
102-8964 Drawbar Ar
| 10***64 | Drawbar Ar | 1 |
| 16***86 | Tank Group-Fuel; -Center | 1 |
| 5P***02 | Padlock Group; (Includes: Battery Compartments, Platform Compartments, Radiator Access Door, Firewall Doors) | 2 |
8x-1736 Fastener Gp-Bottom Guard
| 8T***39 | Washer; (6.0mm Thk)(M21.5x6x45mm) | 17 |
| 8T***30 | Capscrew; (Use 12-16) (Hex Hd) (M20x2.5x50) (Gd 10.9 Z) | 17 |
| 8X***36 | Fastener Group-Bottom Guard | 1 |
8x-1379 Fastener Gp-Drawbar & Bumper
| 3S***23 | Washer 5.7 cm(2.24 In.)O.D. | 12 |
| 8C***11 | Bolt; (M30x3.5x90-mm) | 12 |
| 8X***79 | Fastener Group-Drawbar & Bumper | 1 |
8x-1714 Fastener Gp-Fender
| 6T***80 | Mount-Rubber | 16 |
| 6V***88 | Nut-Self Locking; (M20x2.50 Thd) | 4 |
| 7X***63 | Bolt-Plt; (M20 X 2.5 X 60) | 10 |
101-2658 Fastener Gp-Fender
| 10***58 | Fastener Group-Fender | 1 |
| 10***59 | Plate As | 2 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 12 |
8x-1737 Fastener Gp-Handrail
| 6V***44 | Nut - Self Locking (2nd Type) | 32 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 308 |
| 8T***36 | Capscrew; (Hex Hd) (M10 X 1.50 X 25l Gr 10.9) | 212 |
7i-5484 Fastener Gp-Handrail
| 11***80 | Plate | 19 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 38 |
| 5P***68 | Clip (Slot-For Use On 52 mm Od Tube) | 38 |
8x-0141 Fender As-Front
| 5G***59 | Boss; (M16x40-mm) | 2 |
| 8T***90 | Nut-Weld (M10x1.5-6h Thd) | 3 |
| 8T***97 | Nut-Weld; (M12x1.75-Thd) | 4 |
2a-6828 Fender As-Front -Lh
| 2A***28 | Fender As-Front; -Lh | 1 |
| 5G***59 | Boss; (M16x40-mm) | 2 |
| 8T***90 | Nut-Weld (M10x1.5-6h Thd) | 3 |
2a-6829 Fender As-Front -Rh
| 2A***29 | Fender As-Front; -Rh | 1 |
| 5G***59 | Boss; (M16x40-mm) | 2 |
| 8T***90 | Nut-Weld (M10x1.5-6h Thd) | 3 |
8x-0142 Fender As-Front -Rh
| 5G***59 | Boss; (M16x40-mm) | 2 |
| 8T***90 | Nut-Weld (M10x1.5-6h Thd) | 3 |
| 8T***97 | Nut-Weld; (M12x1.75-Thd) | 4 |
8x-1356 Fender As-Rear
| 8T***90 | Nut-Weld (M10x1.5-6h Thd) | 48 |
| 8X***56 | Fender As-Rear | 1 |
7i-5895 Fender As-Rear
| 7I***95 | Fender As-Rear | 1 |
| 8T***90 | Nut-Weld (M10x1.5-6h Thd) | 48 |
121-2495 Fender Gp-Front -Lh
| 12***95 | Fender Group-Front; -Lh | 1 |
| 2A***28 | Fender As-Front; -Lh | 1 |
| 5P***98 | Tread Each .572 M (22.5 In.) Long | 0 |
121-2496 Fender Gp-Front -Rh
| 12***96 | Fender Group-Front; -Rh | 1 |
| 2A***29 | Fender As-Front; -Rh | 1 |
| 5P***98 | Tread Each .572 M (22.5 In.) Long | 0 |
8x-0023 Firewall Gp
| 4V***61 | Mount | 6 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 8 |
| 5P***83 | Seal .32 M (Order By The Meter) | 0 |
213-3740 Frame As-Front
| 10***80 | Boss | 4 |
| 10***75 | Plate As | 1 |
| 10***76 | Plate As | 1 |
233-4740 Frame As-Rear
| 11***58 | Plate | 1 |
| 13***18 | Plate | 8 |
| 22***08 | Plate | 9 |
105-3145 Frame Gp-Loader
| 10***80 | Boss | 4 |
| 10***45 | Frame Group-Loader | 1 |
| 10***46 | Frame As-Loader | 1 |
169-1534 Frame Gp-Loader
| 11***18 | Block | 1 |
| 11***96 | Pipe | 1 |
| 13***18 | Plate | 2 |
164-7667 Frame Gp-Loader
| 13***18 | Plate | 1 |
| 16***67 | Frame Group-Loader | 1 |
8x-0025 Frame Gp-Loader
| 10***33 | Frame As | 1 |
| 10***80 | Boss | 4 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
169-1535 Frame Gp-Loader
| 11***18 | Block | 1 |
| 11***96 | Pipe | 1 |
| 13***18 | Plate | 2 |
8x-0024 Frame Gp-Rear
| 13***36 | Spacer | 1 |
| 23***40 | Frame As-Rear | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
8x-0026 Guard Gp-Bottom -Transmission
| 8X***26 | Guard Group-Bottom; -Transmission | 1 |
| 8X***21 | Guard | 1 |
| 8X***24 | Guard | 1 |
109-0036 Guard Gp-Crankcase
| 10***36 | Guard Group-Crankcase | 1 |
| 8T***39 | Washer; (6.0mm Thk)(M21.5x6x45mm) | 18 |
| 8T***30 | Capscrew; (Use 12-16) (Hex Hd) (M20x2.5x50) (Gd 10.9 Z) | 18 |
8x-0027 Guard Gp-Front
| 1A***19 | Washer 44.4 mm(1.75 In.) O.D. | 4 |
| 4V***61 | Mount | 4 |
| 7D***33 | Grab Iron | 6 |
7i-5905 Guard Gp-Front
| 10***55 | Guard As | 1 |
| 10***06 | Plate | 1 |
| 1A***19 | Washer 44.4 mm(1.75 In.) O.D. | 4 |
8x-8388 Guard Gp-Radiator
| 10***66 | Block | 2 |
| 6H***56 | Roll Pin--Lever To Compression Release Control Shaft | 1 |
| 6V***37 | Plain Washer - Hardened | 6 |
213-1846 Guard Gp-Radiator
| 21***46 | Guard Group-Radiator | 1 |
| 21***13 | Guard As | 1 |
| 21***16 | Grill As | 1 |
101-2725 Guard Gp-Radiator
| 10***66 | Block | 2 |
| 10***25 | Guard Group-Radiator | 1 |
| 10***35 | Bracket As | 2 |
213-1845 Guard Gp-Radiator -Lower
| 21***45 | Guard Group-Radiator; -Lower | 1 |
| 21***12 | Guard As | 1 |
| 21***16 | Grill As | 1 |
7i-5023 Handrail Gp
| 10***21 | Handrail As; (Lh) | 1 |
| 10***23 | Handrail As; (Rh) | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
8x-1707 Handrail Gp
| 7I***07 | Pipe As | 4 |
| 8X***61 | Handrail As; (Rh) | 2 |
| 8X***62 | Handrail As; (Lh) | 2 |
213-3741 Hardware Gp-Loader Frame -Autolube Field Upgrade Kit
| 11***58 | Plate | 1 |
| 13***26 | Block | 2 |
| 15***71 | Plate | 1 |
8x-0029 Hitch Gp-Articulating
| 13***88 | Shim Pack; (Includes 27-Shims) | 1 |
| 13***04 | Plate-Lock | 1 |
| 13***37 | Spacer | 1 |
8x-0030 Hood & Guard Gp
| 10***27 | Panel; (Rh) | 1 |
| 10***28 | Panel; (Lh) | 1 |
| 10***29 | Panel | 2 |
127-1674 Hood & Guard Gp
| 10***27 | Panel; (Rh) | 1 |
| 10***28 | Panel; (Lh) | 1 |
| 10***29 | Panel | 2 |
153-9514 Hood & Guard Gp
| 10***27 | Panel; (Rh) | 1 |
| 10***28 | Panel; (Lh) | 1 |
| 10***29 | Panel | 2 |
220-1431 Kit-Automatic Lubrication
| 21***41 | Hardware Group-Loader Frame; -Autolube Field Upgrade Kit | 1 |
| 21***68 | Lines Group-Automatic Lubrication; -Autolube Field Upgrade Kit | 1 |
| 21***69 | Lines Group-Hydraulic; -Autolube Field Upgrade Kit | 1 |
8x-0033 Ladder Gp
| 5V***79 | Pin | 1 |
| 6V***97 | Pin Lock (R. Clip) | 2 |
| 8T***97 | Nut-Weld; (M12x1.75-Thd) | 4 |
215-6868 Lines Gp-Automatic Lubrication -Autolube Field Upgrade Kit
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 4 |
| 14***85 | Elbow; (45°) | 2 |
| 21***73 | Plate | 1 |
188-3392 Lines Gp-Grease -High Lift
| 11***60 | Tube As | 2 |
| 14***07 | Valve Group-Lube Distribution; -2-Injector | 2 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 2 |
8x-0041 Lines Gp-Grease
| 2R***39 | Clamp (3 Hole) | 10 |
| 3B***85 | Fitting-Hydraulic; Fitting 45 Degrees Angle--Used As Required | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 10 |
8x-0040 Lines Gp-Grease
| 11***33 | Plate; (Right Side) | 1 |
| 14***16 | Connector Group | 19 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 10 |
8x-4656 Lines Gp-Grease
| 3B***85 | Fitting-Hydraulic; Fitting 45 Degrees Angle--Used As Required | 4 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 4 |
| 4D***66 | Clip (1.38" Long) | 3 |
188-3391 Lines Gp-Grease
| 11***60 | Tube As | 2 |
| 14***07 | Valve Group-Lube Distribution; -2-Injector | 2 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 2 |
8x-1745 Lines Gp-Grease
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 22 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 28 |
| 4K***64 | Clip-- Lock Line To Hitch; (14.2mm Id)(Circular) | 6 |
107-8105 Lines Gp-Lubrication -Drive Shaft Support Bearing
| 10***05 | Lines Group-Lubrication; -Drive Shaft Support Bearing | 1 |
| 10***74 | Block | 1 |
| 3B***85 | Fitting-Hydraulic; Fitting 45 Degrees Angle--Used As Required | 1 |
8x-0043 Link Gp-Steering Frame Lock
| 13***84 | Pin | 2 |
| 1J***20 | Cotter Pin | 2 |
| 8X***43 | Link Group-Steering Frame Lock | 1 |
8x-0110 Lubrication Ar-Automatic
| 5P***02 | Padlock Group; (Includes: Battery Compartments, Platform Compartments, Radiator Access Door, Firewall Doors) | 1 |
| 8X***10 | Lubrication Ar-Automatic | 1 |
| 8X***57 | Lubrication Group-Automatic | 1 |
8x-1761 Lubrication Ar-Central
| 8X***61 | Lubrication Ar-Central | 1 |
| 8X***62 | Lubrication Group-Central | 1 |
| 8X***63 | Lubrication Group-Central | 1 |
152-8968 Lubrication Gp-Automatic
| 15***68 | Lubrication Group-Automatic | 1 |
| 15***09 | Pump Group-Lubrication; -Automatic | 1 |
| 15***12 | Gasket | 1 |
8x-1758 Lubrication Gp-Automatic
| 00***83 | Nipple-Pipe; (Hexagon) | 2 |
| 10***48 | Hose As | 1 |
| 2T***96 | Elbow | 1 |
8x-1759 Lubrication Gp-Automatic
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 11***61 | Hose As | 1 |
| 3J***90 | Plug Adapter Turbo Oil Supply; Plug-Adapter Turbo Oil Supply | 2 |
8x-1757 Lubrication Gp-Automatic
| 00***33 | Tee-Pipe | 1 |
| 10***97 | Control Group-Electronic | 1 |
| 2D***16 | Washer | 2 |
156-6294 Lubrication Gp-Automatic
| 13***35 | Fitting-Grease | 1 |
| 15***89 | Hose As | 1 |
| 15***94 | Lubrication Group-Automatic | 1 |
8x-1760 Lubrication Gp-Automatic
| 2T***96 | Elbow | 2 |
| 3J***90 | Plug Adapter Turbo Oil Supply; Plug-Adapter Turbo Oil Supply | 2 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
8x-1763 Lubrication Gp-Central
| 3B***85 | Fitting-Hydraulic; Fitting 45 Degrees Angle--Used As Required | 9 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 9 |
| 6V***28 | Elbow-Face Seal (For 6.35mm Od Tube) | 9 |
8x-1762 Lubrication Gp-Central
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 12 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 12 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 4 |
8x-1764 Lubrication Gp-Central
| 3B***88 | Fitting-Grease; (Ejector Guide Rollers) | 6 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 6 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 4 |
109-7868 Mounting Gp-Battery
| 10***72 | Box As-Battery | 1 |
| 10***68 | Mounting Group-Battery | 1 |
| 8F***37 | Washer- .65mm (.026 In.) Thick | 13 |
122-4562 Mounting Gp-Control
| 12***62 | Mounting Group-Control | 1 |
| 7G***39 | Spacer; (13.5x57x6-mm Thk) | 4 |
| 7T***31 | Mount As; (Rubber) | 4 |
155-4809 Pump Gp-Lubrication -Automatic
| 00***10 | Tee; (Pipe) | 1 |
| 03***46 | Elbow | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
8w-4594 Pump Gp-Lubrication
| 5T***00 | Pump Group-Lubrication; -Automatic Lubrication | 1 |
| 8W***94 | Pump Group-Lubrication; -Automatic Lubrication | 1 |
5t-7800 Pump Gp-Lubrication
| 00***10 | Tee; (Pipe) | 1 |
| 03***46 | Elbow | 1 |
| 10***51 | Bracket | 1 |
7i-5909 Shield Gp-Brake Line -Front
| 10***70 | Guard | 1 |
| 10***71 | Guard | 1 |
| 10***10 | Bracket As | 2 |
7i-5017 Step Gp
| 7I***17 | Step Group | 1 |
| 7I***18 | Support-Step; (Rubber) | 2 |
| 7I***19 | Step As | 2 |
113-0672 Step Gp
| 11***72 | Step Group | 1 |
| 11***74 | Step As | 2 |
| 11***75 | Plate | 6 |
155-7409 Tank Gp-Grease
| 15***03 | Cover | 1 |
| 15***07 | Tank As | 1 |
| 15***10 | Gasket | 1 |
8x-9635 Tread Gp-Non-Skid
| 5P***98 | Tread Each .572 M (22.5 In.) Long | 0 |
| 8X***35 | Tread Group-Non-Skid | 1 |
8w-2597 Valve Gp-Lube Distribution -4-Injector
| 19***54 | Packing | 4 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 4 |
| 8W***55 | Kit-Injector; (Lube Valve) | 1 |
141-2107 Valve Gp-Lube Distribution -2-Injector
| 14***07 | Valve Group-Lube Distribution; -2-Injector | 1 |
| 19***54 | Packing | 2 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 2 |
5t-5009 Valve Gp-Lube Distribution -3-Injector
| 19***54 | Packing | 1 |
| 5T***09 | Valve Group-Lube Distribution; -3-Injector-Steering Cyl, Linkage, Rh, Lh-Hoist, Rear Susp Cyl, Rh, Lh-Front Susp, Steer Cyl, Rh, Lh | 1 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 3 |
8x-7899 Walkway Gp
| 8T***92 | Capscrew; (Hex Hd) (M12 X 1.75 X 25, Gr10.9, Z) | 4 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 4 |
| 8X***99 | Walkway Group | 1 |
101-7345 Walkway Gp
| 10***01 | Tread As-Lh | 1 |
| 10***02 | Tread As-Rh | 1 |
| 10***45 | Walkway Group | 1 |
Fuel System
9x-9482 Valve Gp-Solenoid
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
4w-2967 Control Gp-Fuel Injection
| 00***60 | Bolt-12 Point Head; (1/4-20x0.875-In) | 32 |
| 06***14 | Ring-Retaining | 4 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 8 |
101-8238 Control Gp-Fuel Ratio
| 10***38 | Control Group-Fuel Ratio | 1 |
| 13***09 | Stem As | 1 |
| 2W***42 | Gasket-Guide | 1 |
4p-6538 Control Gp-Governor
| 2W***25 | Gasket | 1 |
| 2W***21 | Seal-O-Ring; (4.47mm Id) | 2 |
| 2W***25 | Seal-O-Ring | 1 |
8x-3528 Control Gp-Governor
| 03***16 | Bolt-Self Locking; (1/4unc X 3/4) | 3 |
| 1B***04 | Key,Woodruff Governor And Decelerator Control | 1 |
| 1V***41 | Seal | 1 |
8x-0125 Control Gp-Governor
| 1V***41 | Seal | 1 |
| 3B***07 | Cotter--Yoke Assembly | 1 |
| 4J***25 | Pin (Small) | 1 |
105-3156 Control Gp-Governor
| 10***50 | Pedal | 1 |
| 10***56 | Control Group-Governor | 1 |
| 10***61 | Plate | 1 |
7c-4114 Drive Gp-Governor
| 06***57 | Seal-O-Ring | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 5 |
1w-6034 Fastener Gp-Fuel Inj Pump -Rh
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 5 |
1n-3261 Filter Gp-Fuel
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***61 | Switch As-Pressure; (Implement Oil Cooler Filter) | 1 |
7e-6719 Filter Gp-Primary Fuel
| 1L***69 | Ring-Retaining | 1 |
| 2H***29 | Ring - Retaining External | 1 |
| 2J***57 | Packing,Preformed Screw Assembly Part Of Kit P/N 5r***25 | 1 |
101-3756 Fitting Gp-Fuel Tank
| 10***56 | Fitting Group-Fuel Tank | 1 |
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
| 14***42 | Connector Group | 1 |
7e-9326 Governor Gp
| 12***75 | Governor Group | 1 |
| 1W***36 | Lines Group-Fuel Ratio Control | 1 |
| 1W***34 | Fastener Group-Governor | 1 |
6i-0662 Governor Gp
| 03***80 | Screw-Tapping; (1/4-20x1-In) | 34 |
| 0T***84 | Bolt 19 mm(.75 In.) Long | 1 |
| 10***38 | Control Group-Fuel Ratio | 1 |
101-1256 Governor Gp
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 2 |
| 03***80 | Screw-Tapping; (1/4-20x1-In) | 42 |
| 0T***84 | Bolt 19 mm(.75 In.) Long | 1 |
124-3175 Governor Gp
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 2 |
| 03***80 | Screw-Tapping; (1/4-20x1-In) | 30 |
| 10***38 | Control Group-Fuel Ratio | 1 |
120-7426 Governor Gp
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 2 |
| 03***80 | Screw-Tapping; (1/4-20x1-In) | 42 |
| 0T***84 | Bolt 19 mm(.75 In.) Long | 1 |
4p-9076 Injector Gp-Fuel
| 19***84 | Seal-O-Ring | 2 |
| 4P***76 | Injector Group-Fuel | 1 |
| 6V***50 | Seal-O-Ring (Id=39.34mm) | 1 |
100-6306 Kit-Governor Conversion
| 10***06 | Kit-Governor Conversion | 1 |
8x-0039 Lines Gp-Fuel -Primary Fuel Filter
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
8x-1571 Lines Gp-Fuel -Without Heater
| 1S***15 | Conduit Clip (Use As Required) | 1 |
| 6V***89 | Clip (28.58mm Id) | 2 |
| 7J***08 | Seal-To Transmission Cooler Ports | 1 |
7e-6717 Lines Gp-Fuel Injection
| 00***81 | Tee-Union; (Flared 37-Deg) | 1 |
| 03***72 | Elbow; (Flared 90 Degree) | 2 |
| 06***48 | Union-Flared | 2 |
1w-2136 Lines Gp-Fuel Ratio Control -Rh
| 00***40 | Connector; (Flared) | 1 |
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
| 1W***36 | Lines Group-Fuel Ratio Control | 1 |
105-3149 Lines Gp-Governor
| 10***49 | Lines Group-Governor | 1 |
| 3F***60 | Spacer; (0.563x1x0.844-In Thk) | 1 |
| 4J***14 | Elbow To Tee For R.H. Supply Line | 1 |
9y-1796 Pump Gp-Fuel Injection
| 1N***10 | Clamp-Injector | 1 |
| 4F***26 | Bolt 4 In. (101.60 mm) Long | 1 |
| 6V***50 | Seal-O-Ring (Id=39.34mm) | 1 |
8n-7763 Pump Gp-Fuel Priming
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 1 |
| 1H***71 | Seal 20.22 mm(.796 In.)I. D. | 1 |
| 2W***05 | Pump As-Fuel Priming | 1 |
8n-6151 Pump Gp-Fuel Transfer
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
| 1N***78 | Pump Group-Fuel Transfer; (1-Section Gear) | 1 |
| 1N***36 | Coupling-Drive | 1 |
1n-4478 Pump Gp-Fuel Transfer
| 11***96 | Seal-Lip; (Outer) | 1 |
| 11***97 | Seal-Lip; (Inner) | 1 |
| 12***37 | Shaft As-Drive | 1 |
1w-4861 Shutoff Gp-Manual
| 1W***61 | Shutoff Group-Manual | 1 |
| 1W***82 | Gasket-Shut-Off | 1 |
| 2W***38 | Screw-Forming; (1/4-20x25.4mm) | 2 |
7i-5839 Shutoff Gp-Mechanical
| 03***48 | Clip; (11.11mm .437in Id) | 4 |
| 10***43 | Cable As | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 1 |
8x-1732 Shutoff Gp-Mechanical
| 03***48 | Clip; (11.11mm .437in Id) | 6 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 1 |
| 1B***01 | Nut Generator Line Leads; Nut-Generator Line Leads | 3 |
7i-5678 Tank Gp-Fuel -Rh
| 10***09 | Cap As-Filler; (Fast Fill Fuel) | 1 |
| 16***88 | Tank As-Fuel; (Rh) | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
8x-6695 Tank Gp-Fuel -Rh
| 1H***05 | Block | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
| 2A***87 | Pin | 1 |
7i-5672 Tank Gp-Fuel -Center
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
| 3B***51 | Plug (Use Without Low Temperature Sensor) | 1 |
| 7I***72 | Tank Group-Fuel; -Center | 1 |
8x-2991 Tank Gp-Fuel -Center
| 1H***05 | Block | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
| 3B***51 | Plug (Use Without Low Temperature Sensor) | 1 |
169-9086 Tank Gp-Fuel -Center
| 16***86 | Tank Group-Fuel; -Center | 1 |
| 18***65 | Tank As-Fuel | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
7i-5676 Tank Gp-Fuel -Rh
| 10***09 | Cap As-Filler; (Fast Fill Fuel) | 1 |
| 1H***05 | Block | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
7i-5680 Tank Gp-Fuel -Lh
| 10***09 | Cap As-Filler; (Fast Fill Fuel) | 1 |
| 16***72 | Tank As-Fuel; (Lh) | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
7i-5674 Tank Gp-Fuel -Lh
| 1H***05 | Block | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
| 3B***51 | Plug (Use Without Low Temperature Sensor) | 1 |
8x-0046 Tank Gp-Fuel -Lh
| 1H***05 | Block | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
| 2A***87 | Pin | 1 |
8x-6694 Tank Gp-Fuel -Lh
| 1H***05 | Block | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
| 2A***87 | Pin | 1 |
8x-1360 Tank Gp-Fuel -Rh
| 1H***05 | Block | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
| 2A***87 | Pin | 1 |
2g-9000 Valve As-Tank -Fast Fill Fuel
| 2G***00 | Valve As-Tank | 1 |
6d-3781 Valve Gp-Check
| 2R***32 | Guide-Shuttle | 1 |
| 2R***13 | Cap | 1 |
| 3D***45 | Seal-Bottle To Connector | 1 |
Hydraulic System
179-3642 Cooler Gp-Hydraulic Oil -Hydraulic, Steering, Brake
| 17***42 | Cooler Group-Hydraulic Oil; -Hydraulic, Steering, Brake | 1 |
| 17***56 | Frame As | 1 |
| 17***57 | Bracket As | 2 |
4p-9999 Cooler Gp-Hydraulic Oil
| 10***44 | Clamp-Mounting | 2 |
| 12***18 | Core As | 1 |
| 14***62 | Support As | 1 |
129-0684 Cooler Gp-Hydraulic Oil
| 12***84 | Cooler Group-Hydraulic Oil | 1 |
| 13***75 | Mount As | 2 |
| 13***93 | Frame As | 1 |
203-8046 Cylinder Ar-Lift
| 19***76 | Cylinder Group-Lift; -Standard Lift Machines | 2 |
| 20***46 | Cylinder Ar-Lift | 1 |
| 8X***13 | Mounting Group-Lift Cylinder | 1 |
203-8043 Cylinder Ar-Lift
| 19***75 | Cylinder Group-Lift; -High Lift Machines | 2 |
| 20***43 | Cylinder Ar-Lift | 1 |
| 8X***04 | Lines Group-Lift Cylinder; -High | 1 |
206-7855 Cylinder Ar-Tilt
| 11***71 | Cylinder Group-Tilt; -Standard Lift Machines, Rh | 1 |
| 11***72 | Cylinder Group-Tilt; -Standard Lift Machines, Lh | 1 |
| 20***55 | Cylinder Ar-Tilt | 1 |
206-7856 Cylinder Ar-Tilt
| 11***20 | Cylinder Group-Tilt; -Rh-High Lift, Rh | 1 |
| 11***21 | Cylinder Group-Tilt; -Lh-High Lift, Lh | 1 |
| 20***56 | Cylinder Ar-Tilt | 1 |
9t-9020 Cylinder Gp-Lift
| 10***07 | Washer-Hard; (40.5x64x6-mm Thk) | 6 |
| 10***30 | Piston | 1 |
| 10***32 | Rod As | 1 |
193-4076 Cylinder Gp-Lift -Standard Lift Machines
| 10***07 | Washer-Hard; (40.5x64x6-mm Thk) | 7 |
| 15***45 | Ring-Backup | 1 |
| 16***39 | Seal As-Buffer | 1 |
193-4075 Cylinder Gp-Lift -High Lift Machines
| 10***07 | Washer-Hard; (40.5x64x6-mm Thk) | 7 |
| 15***45 | Ring-Backup | 1 |
| 16***39 | Seal As-Buffer | 1 |
9t-9023 Cylinder Gp-Lift
| 10***07 | Washer-Hard; (40.5x64x6-mm Thk) | 6 |
| 10***30 | Piston | 1 |
| 10***31 | Rod As | 1 |
114-2820 Cylinder Gp-Tilt -Rh
| 10***67 | Bolt; (M36x4x150-mm) | 2 |
| 10***72 | Bolt; (M36x4x120-mm) | 6 |
| 11***20 | Cylinder Group-Tilt; -Rh-High Lift, Rh | 1 |
112-3172 Cylinder Gp-Tilt -Standard Lift Machines, Lh
| 10***67 | Bolt; (M36x4x150-mm) | 2 |
| 10***72 | Bolt; (M36x4x120-mm) | 6 |
| 11***72 | Cylinder Group-Tilt; -Standard Lift Machines, Lh | 1 |
114-2821 Cylinder Gp-Tilt -Lh
| 10***67 | Bolt; (M36x4x150-mm) | 2 |
| 10***72 | Bolt; (M36x4x120-mm) | 6 |
| 11***21 | Cylinder Group-Tilt; -Lh-High Lift, Lh | 1 |
9t-9024 Cylinder Gp-Tilt -Rh
| 10***67 | Bolt; (M36x4x150-mm) | 2 |
| 10***72 | Bolt; (M36x4x120-mm) | 6 |
| 10***54 | Kit-Hydraulic Cylinder Seal | 1 |
9t-9022 Cylinder Gp-Tilt
| 10***67 | Bolt; (M36x4x150-mm) | 2 |
| 10***72 | Bolt; (M36x4x120-mm) | 6 |
| 10***54 | Kit-Hydraulic Cylinder Seal | 1 |
112-3171 Cylinder Gp-Tilt -Standard Lift Machines, Rh
| 10***67 | Bolt; (M36x4x150-mm) | 2 |
| 10***72 | Bolt; (M36x4x120-mm) | 6 |
| 11***71 | Cylinder Group-Tilt; -Standard Lift Machines, Rh | 1 |
9t-9021 Cylinder Gp-Tilt
| 10***67 | Bolt; (M36x4x150-mm) | 2 |
| 10***72 | Bolt; (M36x4x120-mm) | 6 |
| 10***54 | Kit-Hydraulic Cylinder Seal | 1 |
9t-9025 Cylinder Gp-Tilt -Lh
| 10***67 | Bolt; (M36x4x150-mm) | 2 |
| 10***72 | Bolt; (M36x4x120-mm) | 6 |
| 10***54 | Kit-Hydraulic Cylinder Seal | 1 |
219-6273 Cylinder Gp-Tilt -High Lift Machines, Rh
| 10***67 | Bolt; (M36x4x150-mm) | 2 |
| 10***72 | Bolt; (M36x4x120-mm) | 6 |
| 15***44 | Ring-Backup | 1 |
219-6272 Cylinder Gp-Tilt -High Lift Machines, Lh
| 10***67 | Bolt; (M36x4x150-mm) | 2 |
| 10***72 | Bolt; (M36x4x120-mm) | 6 |
| 15***44 | Ring-Backup | 1 |
104-5788 Filler Gp-Hydraulic Oil
| 10***88 | Filler Group-Hydraulic Oil | 1 |
| 11***12 | Block | 1 |
| 11***13 | Block | 1 |
138-4343 Filter & Lines Gp-Case Drain -Hydraulic-Implement
| 13***95 | Hose As | 1 |
| 13***12 | Plate | 2 |
| 13***43 | Filter & Lines Group-Case Drain; -Hydraulic-Implement | 1 |
118-0240 Filter & Mtg Gp-Pilot -Hydraulic
| 11***40 | Filter & Mtg Group-Pilot; -Hydraulic | 1 |
| 8E***69 | Filter Group-Oil; -Parking Brake Release-Xmsn Charging, Lubrication | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
8e-0769 Filter Gp-Oil -Pilot
| 13***75 | Filter Element As-Oil; (Ultra High Efficiency)(Cleanout/High Efficiency) | 1 |
| 1R***19 | Filter Element As-Oil; (Standard Efficiency)(Power Train) | 1 |
| 2J***56 | Ring-Retaining | 1 |
8x-0032 Kickout & Positioner Gp
| 11***19 | Guard As | 1 |
| 1S***24 | Clip (.406 In. Hote) | 2 |
| 3K***92 | Nut As-Spring | 2 |
8x-1536 Kickout & Positioner Gp
| 05***10 | Retainer | 1 |
| 11***06 | Bracket As | 1 |
| 11***20 | Harness As-Control; (Lift Kickout, Bucket Position) | 1 |
8x-0075 Lines Gp-Hydraulic
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 1P***05 | Seal (Check Valve Outlet) | 5 |
| 1P***82 | Flange-Half | 4 |
138-4341 Lines Gp-Hydraulic
| 13***83 | Hose As | 1 |
| 13***84 | Hose As | 1 |
| 13***85 | Hose As | 1 |
8x-0059 Lines Gp-Hydraulic
| 10***13 | Hose As | 1 |
| 10***56 | Hose As | 1 |
| 10***57 | Hose As | 1 |
215-6869 Lines Gp-Hydraulic -Autolube Field Upgrade Kit
| 03***83 | Spacer | 2 |
| 13***12 | Plate | 2 |
| 14***71 | Bracket | 2 |
8x-8502 Lines Gp-Hydraulic Oil Cooler
| 1P***79 | Flange (Half) | 8 |
| 1P***84 | Flange-Half | 4 |
| 4J***22 | Seal-Interface Between 3rd & Tilt Valve | 2 |
152-8945 Lines Gp-Hydraulic Oil Cooler
| 13***97 | Block | 1 |
| 13***98 | Block | 1 |
| 13***93 | Hose As | 1 |
8x-8503 Lines Gp-Hydraulic Oil Cooler
| 10***15 | Tube As | 1 |
| 10***16 | Tube As | 1 |
| 13***66 | Shield | 2 |
8x-0104 Lines Gp-Lift Cylinder
| 1P***07 | Seal-Rectangular | 2 |
| 8T***73 | Bolt-Plt; (M16 X 2.0 X 110) | 8 |
| 8X***04 | Lines Group-Lift Cylinder; -High | 1 |
8x-3018 Lines Gp-Lift Cylinder
| 1P***04 | Seal - Rectangular (45mm Dia) | 8 |
| 1P***05 | Seal (Check Valve Outlet) | 4 |
| 1P***06 | Seal; 57.9mm(2.28in.)I.D. | 2 |
8x-3019 Lines Gp-Lift Cylinder
| 1P***07 | Seal-Rectangular | 2 |
| 8T***73 | Bolt-Plt; (M16 X 2.0 X 110) | 8 |
| 8X***13 | Tube As | 2 |
8x-0060 Lines Gp-Lift Cylinder
| 1P***04 | Seal - Rectangular (45mm Dia) | 10 |
| 1P***05 | Seal (Check Valve Outlet) | 6 |
| 1P***06 | Seal; 57.9mm(2.28in.)I.D. | 4 |
8x-0062 Lines Gp-Pilot
| 11***18 | Valve Group-Relief; -Pilot | 1 |
| 11***44 | Hose As | 1 |
| 11***88 | Valve Group-Selector & Press Cont; -Dead Engine, Lift Arm Lower | 1 |
8x-2994 Lines Gp-Pilot
| 10***26 | Hose As | 1 |
| 11***69 | Hose As | 1 |
| 11***70 | Plate | 1 |
8x-1398 Lines Gp-Tilt Cylinder
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 1P***05 | Seal (Check Valve Outlet) | 6 |
| 5P***77 | Flange-Half | 4 |
8x-0064 Lines Gp-Tilt Cylinder
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 1P***05 | Seal (Check Valve Outlet) | 10 |
| 1P***67 | Flange-Half (43.31 mm Id) | 8 |
8x-1399 Lines Gp-Tilt Cylinder
| 1P***06 | Seal; 57.9mm(2.28in.)I.D. | 2 |
| 1P***07 | Seal-Rectangular | 2 |
| 5P***77 | Flange-Half | 4 |
153-3340 Mounting Gp-Filter & Lines
| 13***26 | Block | 2 |
| 15***40 | Mounting Group-Filter & Lines | 1 |
| 8Y***95 | Boss; (M10x1.5x39-mm) | 3 |
8x-1713 Mounting Gp-Lift Cylinder
| 15***04 | Collet | 4 |
| 3E***11 | Bolt; (M30x3.5x760-mm) | 2 |
| 3S***23 | Washer 5.7 cm(2.24 In.)O.D. | 4 |
8x-0067 Pump & Mtg Gp-Implement
| 1U***40 | Pump Group-Piston; -Implement | 1 |
| 3G***48 | Pump Group-Piston; -Implement | 2 |
| 5F***06 | Packing,Preformed Pump Mtg Part Of Kit P/N 5r***25 | 3 |
8x-0066 Pump & Mtg Gp-Pilot & Cooler
| 5F***06 | Packing,Preformed Pump Mtg Part Of Kit P/N 5r***25 | 1 |
| 6E***56 | Pump Group-Gear; -Pilot System, Hydraulic Oil Cooler | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 2 |
6e-0456 Pump Gp-Gear
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 3G***99 | Kit-Seal; (Seal) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 8 |
9t-0436 Pump Gp-Gear
| 5P***13 | Washer-Between Welded Nut & Top Swivel | 4 |
| 8S***89 | Bolt 4.50 In. (114.30 mm) Long | 4 |
| 9T***36 | Pump Group-Gear; -Pump Drive Lubrication | 1 |
1u-3840 Pump Gp-Piston
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 8 |
| 15***22 | Nut-Self Locking; (7/8-14 Thd) | 1 |
| 1A***23 | Dowel (1" Long) | 2 |
3g-2848 Pump Gp-Piston
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 8 |
| 15***22 | Nut-Self Locking; (7/8-14 Thd) | 1 |
| 1A***23 | Dowel (1" Long) | 2 |
169-4073 Screen Gp-Hydraulic
| 10***95 | Screen As-High Pressure | 1 |
| 12***35 | Bolt-Socket Head; (M4x0.7x40-mm) | 4 |
| 16***73 | Screen Group-Hydraulic | 1 |
8x-0068 Tank & Mtg Gp-Hydraulic -Implement
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 4W***85 | Block-Support | 2 |
| 5P***47 | Washer (Bracket To Valve Support) | 12 |
8x-0084 Tank & Mtg Gp-Hydraulic -Steering, Brake, Brake Cooling
| 10***13 | Bracket | 2 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
109-0378 Tank Gp-Hydraulic
| 10***68 | Gasket | 1 |
| 10***70 | Plate As | 1 |
| 10***78 | Tank Group-Hydraulic | 1 |
131-6448 Tank Gp-Hydraulic -Implement
| 03***06 | Seal (Use As Required) | 1 |
| 10***79 | . Yoke, Cover, Yoke | 1 |
| 10***82 | Gasket | 1 |
102-2779 Tank Gp-Hydraulic
| 10***79 | Tank Group-Hydraulic | 1 |
| 10***80 | Tank As | 1 |
| 10***82 | Block | 1 |
9t-9005 Tank Gp-Hydraulic
| 1H***39 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 1 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 2 |
| 1U***27 | Guide-Valve | 1 |
9t-4725 Tank Gp-Hydraulic -Brake Cooling
| 1U***27 | Guide-Valve | 1 |
| 2D***02 | Plate | 1 |
| 3G***61 | Gasket | 1 |
9t-9000 Tank Gp-Hydraulic -Steering, Brake
| 1U***27 | Guide-Valve | 1 |
| 3P***39 | Seal-O-Ring | 1 |
| 4J***22 | Seal-Interface Between 3rd & Tilt Valve | 1 |
8x-0069 Valve & Mtg Gp-Main Control
| 12***79 | Channel | 1 |
| 12***06 | Bracket As | 1 |
| 13***73 | Valve Group-Main Control; -Rh | 1 |
6e-3528 Valve Gp-Breaker Relief
| 1U***67 | Kit-Seal; (Breaker Relief Valve)(Hydraulic Tank) | 1 |
| 2S***63 | Seal 49.21 mm(1.9375 In.)I.D. | 2 |
| 5P***32 | Ring-Retaining; (23.47mm Id) | 1 |
117-3512 Valve Gp-Check
| 10***56 | Valve; (Load Check) | 1 |
| 10***57 | Plug | 1 |
| 10***58 | Plug As | 1 |
6e-1252 Valve Gp-Check -Steering Pump Discharge
| 1U***22 | Bearing-Sleeve; (12.65mm Id) | 1 |
| 1U***23 | Plug Assem. | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 2 |
112-5774 Valve Gp-Check
| 11***74 | Valve Group-Check | 1 |
117-3513 Valve Gp-Check
| 10***56 | Valve; (Load Check) | 1 |
| 10***57 | Plug | 1 |
| 10***58 | Plug As | 1 |
140-0491 Valve Gp-Check -Implement Pump
| 10***56 | Valve; (Load Check) | 1 |
| 10***58 | Plug As | 1 |
| 14***90 | Body | 1 |
6e-4473 Valve Gp-Cooler Bypass -Hydraulic Oil
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 1 |
| 5F***00 | Seal-O-Ring | 1 |
| 5T***28 | Spacer | 1 |
9t-9003 Valve Gp-Main Control -Left
| 10***56 | Valve; (Load Check) | 2 |
| 10***58 | Plug As | 2 |
| 1A***57 | Pin--Yoke End | 2 |
133-8673 Valve Gp-Main Control -Rh
| 10***56 | Valve; (Load Check) | 2 |
| 10***58 | Plug As | 2 |
| 11***63 | Piston | 2 |
133-8675 Valve Gp-Main Control -Lh
| 10***56 | Valve; (Load Check) | 2 |
| 10***58 | Plug As | 2 |
| 11***63 | Piston | 2 |
9t-9001 Valve Gp-Main Control -Right
| 10***56 | Valve; (Load Check) | 2 |
| 10***58 | Plug As | 2 |
| 1A***57 | Pin--Yoke End | 2 |
119-5991 Valve Gp-Pilot -Lift & Tilt
| 11***91 | Valve Group-Pilot; -Lift & Tilt | 1 |
| 13***48 | Valve Group-Pilot; -Lift | 1 |
| 13***49 | Valve Group-Pilot; -Tilt | 1 |
102-0522 Valve Gp-Pilot
| 10***17 | Valve Group-Pilot | 1 |
| 10***18 | Valve Group-Pilot | 1 |
| 10***22 | . Shoe; Triangle, Valve Group-Pilot, . Shoe; Triangle (760a) | 1 |
102-0518 Valve Gp-Pilot
| 10***14 | Housing-Seal | 1 |
| 10***18 | Valve Group-Pilot | 1 |
| 2K***99 | Seal-Interface Between Inlet Manifold | 2 |
135-3849 Valve Gp-Pilot
| 13***49 | Seal | 1 |
| 13***49 | Valve Group-Pilot; -Tilt | 1 |
| 2K***99 | Seal-Interface Between Inlet Manifold | 2 |
119-5990 Valve Gp-Pilot
| 11***04 | Seal-Lip Type | 1 |
| 11***90 | Valve Group-Pilot | 1 |
| 2K***99 | Seal-Interface Between Inlet Manifold | 2 |
6e-4739 Valve Gp-Pilot
| 2K***99 | Seal-Interface Between Inlet Manifold | 2 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 4 |
| 6E***37 | Valve Group | 1 |
6e-4738 Valve Gp-Pilot
| 2K***99 | Seal-Interface Between Inlet Manifold | 2 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 4 |
| 6E***37 | Valve Group | 1 |
6e-4740 Valve Gp-Pilot
| 3D***92 | Packing,Preformed Bushing Part Of Kit P/N 5r***25 | 3 |
| 3H***43 | Bolt,Machine Breather Assembly To Cover | 3 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
108-2380 Valve Gp-Pilot
| 10***80 | Valve Group-Pilot | 1 |
| 2K***99 | Seal-Interface Between Inlet Manifold | 2 |
| 6V***49 | Seal-Lip Type | 1 |
135-3848 Valve Gp-Pilot
| 13***49 | Seal | 1 |
| 13***48 | Valve Group-Pilot; -Lift | 1 |
| 2K***99 | Seal-Interface Between Inlet Manifold | 2 |
119-5989 Valve Gp-Pilot
| 11***04 | Seal-Lip Type | 1 |
| 11***89 | Valve Group-Pilot | 1 |
| 2K***99 | Seal-Interface Between Inlet Manifold | 2 |
102-0517 Valve Gp-Pilot
| 10***14 | Housing-Seal | 1 |
| 10***17 | Valve Group-Pilot | 1 |
| 2K***99 | Seal-Interface Between Inlet Manifold | 2 |
6e-6197 Valve Gp-Relief -Main
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4J***22 | Seal-Interface Between 3rd & Tilt Valve | 1 |
| 4T***70 | Spring | 1 |
9t-9198 Valve Gp-Relief -Main
| 3G***93 | Valve Group. (Basic) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4J***22 | Seal-Interface Between 3rd & Tilt Valve | 1 |
118-0018 Valve Gp-Relief -Pilot
| 06***39 | Seal-O-Ring | 1 |
| 11***18 | Valve Group-Relief; -Pilot | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
9t-0122 Valve Gp-Relief -Line
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 5J***53 | Shim; (0.193-mm Thk)(.0076 In. Thick) | 5 |
| 6J***96 | Shim 1.2192 M(.048 In.) Thick | 5 |
9t-9196 Valve Gp-Relief -Line
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 5J***53 | Shim; (0.193-mm Thk)(.0076 In. Thick) | 5 |
| 6J***96 | Shim 1.2192 M(.048 In.) Thick | 5 |
9t-9197 Valve Gp-Relief -Line
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 5J***53 | Shim; (0.193-mm Thk)(.0076 In. Thick) | 5 |
| 6J***96 | Shim 1.2192 M(.048 In.) Thick | 5 |
111-5823 Valve Gp-Relief -Line
| 11***23 | Valve Group-Relief; -Line | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 4T***73 | Shim; (0.13-mm Thk)(.13mm Thk) | 2 |
142-4281 Valve Gp-Relief -Line
| 14***81 | Valve Group-Relief; -Line | 1 |
| 14***86 | Spring | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
9t-5880 Valve Gp-Relief -Pilot
| 06***39 | Seal-O-Ring | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3G***54 | Cap | 1 |
9t-5910 Valve Gp-Relief -Pilot
| 06***39 | Seal-O-Ring | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3G***54 | Cap | 1 |
9t-1320 Valve Gp-Relief -Pilot
| 9T***20 | Valve Group-Relief; -Servo | 1 |
| 9T***80 | Valve Group-Relief; -Pilot | 1 |
| 9T***10 | Valve Group-Relief; -Pilot | 1 |
140-8243 Valve Gp-Selector
| 13***24 | Stem | 1 |
| 14***43 | Valve Group-Selector; -Hydraulic | 1 |
| 6E***84 | Plug | 2 |
6e-3078 Valve Gp-Selector & Press Cont
| 10***81 | Valve Group | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 5S***01 | Spacer; (7.54x14.15x0.9-mm Thk) | 2 |
119-5988 Valve Gp-Selector & Press Cont -Pilot
| 10***66 | Adapter | 2 |
| 11***88 | Valve Group-Selector & Press Cont; -Dead Engine, Lift Arm Lower | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
Implements
8x-0741 Arm & Bearing As-Lift -Standard Lift Machines
| 11***58 | Plate | 1 |
| 11***18 | Block | 1 |
| 15***05 | Bearing-Sleeve | 2 |
8x-1538 Arm & Bearing As-Lift -High Lift Machines
| 11***58 | Plate | 1 |
| 11***18 | Block | 1 |
| 15***05 | Bearing-Sleeve | 2 |
203-8045 Arm Ar-Lift -Standard Lift Machines
| 18***91 | Lines Group-Grease | 1 |
| 20***45 | Arm Ar-Lift; -Standard Lift Machines | 1 |
| 20***72 | Pin & Seal Group-Linkage | 1 |
203-8044 Arm Ar-Lift -High Lift Machines
| 12***72 | Link & Bearing As; -High Lift Machines | 2 |
| 12***64 | Link & Bearing As; -Standard Lift Machines | 2 |
| 18***91 | Lines Group-Grease | 1 |
280-3166 Kit-Linkage
| 11***83 | Connector | 4 |
| 1V***31 | Pin | 2 |
| 24***59 | Pin | 2 |
280-2729 Kit-Linkage -Standard Lift Machines
| 11***83 | Connector | 4 |
| 1V***31 | Pin | 2 |
| 24***59 | Pin | 2 |
7i-5869 Lever & Bearing As -2 Required
| 7I***69 | Lever & Bearing As; -2 Required | 1 |
| 8X***43 | Bearing-Sleeve | 1 |
8x-0751 Lever & Bearing As -2 Required
| 8X***43 | Bearing-Sleeve | 1 |
| 8X***51 | Lever & Bearing As; -2 Required | 1 |
121-9368 Lever & Bearing As -2 Required
| 12***68 | Lever & Bearing As; -2 Required | 1 |
| 8X***43 | Bearing-Sleeve | 1 |
203-8041 Lift Ar -Standard Lift Machines
| 12***64 | Link & Bearing As; -Standard Lift Machines | 2 |
| 16***40 | Electronics Group-Monitor; -Vims-English Spanish-Standard Lift Machines | 1 |
| 20***41 | Lift Ar; -Standard Lift Machines | 1 |
8x-1711 Lift Ar -Standard Lift Machines
| 11***71 | Cylinder Group-Tilt; -Standard Lift Machines, Rh | 1 |
| 11***72 | Cylinder Group-Tilt; -Standard Lift Machines, Lh | 1 |
| 12***64 | Link & Bearing As; -Standard Lift Machines | 2 |
203-8042 Lift Ar -High Lift Machines
| 16***39 | Electronics Group-Monitor; -Vims-English, Spanish-High Lift Machines | 1 |
| 20***42 | Lift Ar; -High Lift Machines | 1 |
| 20***43 | Cylinder Ar-Lift | 1 |
8x-0010 Lift Ar -High Lift Machines
| 11***20 | Cylinder Group-Tilt; -Rh-High Lift, Rh | 1 |
| 11***21 | Cylinder Group-Tilt; -Lh-High Lift, Lh | 1 |
| 12***72 | Link & Bearing As; -High Lift Machines | 2 |
7i-5872 Link & Bearing As
| 6V***33 | Bolt; (M24x3.0x80mm) | 4 |
| 6V***37 | Plain Washer - Hardened | 12 |
| 7I***72 | Link & Bearing As | 1 |
8x-0753 Link & Bearing As
| 1V***38 | Bearing-Sleeve | 1 |
| 6V***33 | Bolt; (M24x3.0x80mm) | 2 |
| 6V***37 | Plain Washer - Hardened | 6 |
8x-3181 Link & Bearing As
| 1V***38 | Bearing-Sleeve | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 6V***33 | Bolt; (M24x3.0x80mm) | 2 |
7i-5871 Link & Bearing As
| 6V***33 | Bolt; (M24x3.0x80mm) | 4 |
| 6V***37 | Plain Washer - Hardened | 12 |
| 7I***71 | Link & Bearing As | 1 |
121-9372 Link & Bearing As -High Lift Machines
| 12***34 | Bushing | 2 |
| 12***72 | Link & Bearing As; -High Lift Machines | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 4 |
121-9864 Link & Bearing As -Standard Lift Machines
| 12***34 | Bushing | 2 |
| 12***64 | Link & Bearing As; -Standard Lift Machines | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 4 |
121-9293 Pin & Seal Gp-Linkage -Bucket Control
| 03***55 | Pin-Spring | 1 |
| 10***14 | Shim; (3-mm Thk) | 12 |
| 10***15 | Shim; (5-mm Thk) | 6 |
8x-1710 Pin & Seal Gp-Linkage -Bucket Control
| 03***55 | Pin-Spring | 1 |
| 10***10 | Pin As-Cartridge | 4 |
| 10***11 | Pin As-Cartridge | 2 |
207-5272 Pin & Seal Gp-Linkage
| 15***04 | Collet | 4 |
| 20***72 | Pin & Seal Group-Linkage | 1 |
| 3E***12 | Bolt; (M30x3.5x620-mm) | 2 |
Lubrication System
4w-1449 Breather Gp -Crankcase
| 03***31 | Seal-O-Ring | 2 |
| 18***07 | Clamp-Hose | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 8 |
137-8196 Breather Gp
| 03***31 | Seal-O-Ring | 2 |
| 13***96 | Breather Group | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 8 |
2w-3701 Filler Gp-Engine Oil
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 11***24 | Tube As | 1 |
| 13***46 | Cap As-Engine Oil Filler | 1 |
9y-8901 Filter Gp-Engine Oil
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 26 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 20 |
123-6884 Filter Gp-Engine Oil
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 26 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 20 |
2w-3712 Filter Gp-Engine Oil
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 26 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 10 |
| 10***18 | Support As | 1 |
133-6600 Fumes Disposal Gp
| 11***14 | Plate As | 1 |
| 11***69 | Pipe-Exhaust | 1 |
| 13***00 | Fumes Disposal Group | 1 |
7e-6716 Fumes Disposal Gp
| 11***14 | Plate As | 1 |
| 4P***25 | Tube | 1 |
| 4P***48 | Tube As | 1 |
7c-6102 Gauge Gp-Oil Level (Dipstick)
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 10***90 | Gauge As-Oil Level (Dipstick) | 1 |
| 4F***65 | Gasket-Shaft | 1 |
111-4392 Gauge Gp-Oil Level (Dipstick)
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 11***92 | Gauge Group-Oil Level (Dipstick) | 1 |
9y-8902 Lines Gp-Engine Oil
| 06***56 | Seal-O-Ring | 4 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
2w-3735 Lines Gp-Engine Oil
| 06***56 | Seal-O-Ring | 4 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
7e-9413 Lines Gp-Turbocharger Oil
| 00***81 | Tee-Union; (Flared 37-Deg) | 2 |
| 03***49 | Elbow; (90 Degree, 37 Degree Flared) | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 16 |
123-5177 Oil Change Ar-High Speed
| 12***71 | Oil Change Group-High Speed; -Transmission | 1 |
| 12***77 | Oil Change Ar-High Speed | 1 |
| 8X***13 | Oil Change Group-High Speed | 1 |
8x-0013 Oil Change Gp-High Speed
| 2D***41 | U-Bolt | 1 |
| 2M***89 | Gasket | 1 |
| 2P***93 | Locknut-Bulkhead; (1 3/16-12 Thd) | 1 |
123-4071 Oil Change Gp-High Speed -Transmission
| 10***96 | Block | 1 |
| 10***97 | Hose | 1 |
| 10***98 | Block As | 1 |
123-4074 Prelubrication Ar-Engine
| 12***74 | Prelubrication Ar-Engine | 1 |
| 12***04 | Pump Group-Prelubrication | 1 |
| 12***05 | Pump Group-Prelubrication | 1 |
116-7153 Pump & Motor Gp-Prelubrication
| 11***53 | Pump & Motor Group-Prelubrication | 1 |
| 15***58 | Connector | 1 |
| 15***59 | Connector | 1 |
7w-0054 Pump Gp-Engine Oil
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 9 |
| 1N***37 | Cover As-Pump | 1 |
8n-6152 Pump Gp-Engine Oil -2-Section Gear
| 29***87 | Seal-O-Ring | 1 |
| 4P***38 | Pump Group-Engine Oil; -2-Section Gear | 1 |
| 4S***82 | Bolt 7.25 In. (18.42 cm) Long | 3 |
106-9872 Pump Gp-Engine Oil -2-Section Gear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 9 |
| 10***67 | Shaft As-Idler; (12-Teeth) | 2 |
4p-5638 Pump Gp-Engine Oil -2-Section Gear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 9 |
| 11***49 | Gasket | 1 |
106-9873 Pump Gp-Engine Oil -2-Section Gear
| 10***72 | Pump Group-Engine Oil; -2-Section Gear | 1 |
| 10***73 | Pump Group-Engine Oil; -2-Section Gear | 1 |
| 1B***73 | Bolt 8.50 In.(215.90 mm) Long | 3 |
6i-3842 Pump Gp-Gerotor
| 18***27 | Seal-O-Ring | 1 |
| 2W***82 | Seal-Oil | 1 |
| 6I***42 | Pump Group-Gerotor; (Governor) | 1 |
129-3104 Pump Gp-Prelubrication
| 03***11 | Terminal-Ring; (2-Ga, 5/16-In Screw) | 1 |
| 03***48 | Clip; (11.11mm .437in Id) | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
129-3105 Pump Gp-Prelubrication
| 12***69 | Harness As | 1 |
| 12***05 | Pump Group-Prelubrication | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 5 |
8n-2012 Pump Gp-Scavenge -Front Sump
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
1w-8508 Pump Gp-Scavenge
| 05***79 | Washer; (13.5x44.45x10-mm Thk) | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
144-8267 Pump Gp-Scavenge
| 05***79 | Washer; (13.5x44.45x10-mm Thk) | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
Machine Arrangement
156-7008 Field Upgrade Kit
| 15***35 | Wiring Group-Cab | 1 |
| 15***38 | Wiring Group-Front | 1 |
| 15***53 | Control Group-Parking Brake | 1 |
156-7010 Field Upgrade Kit
| 13***39 | Lines Group-Brake Cooling; -Front Axle | 1 |
| 13***40 | Lines Group-Brake Cooling; -Rear Axle | 1 |
| 13***41 | Lines Group-Hydraulic; -High Pressure | 1 |
156-7006 Field Upgrade Kit -Cat Monitoring System
| 15***53 | Control Group-Parking Brake | 1 |
| 15***56 | Lines Group-Steering Neutralizer | 1 |
| 15***57 | Lines Group-Steering Neutralizer; -Rear | 1 |
156-7009 Field Upgrade Kit
| 13***39 | Lines Group-Brake Cooling; -Front Axle | 1 |
| 13***40 | Lines Group-Brake Cooling; -Rear Axle | 1 |
| 13***41 | Lines Group-Hydraulic; -High Pressure | 1 |
156-7012 Field Upgrade Kit
| 13***39 | Lines Group-Brake Cooling; -Front Axle | 1 |
| 13***40 | Lines Group-Brake Cooling; -Rear Axle | 1 |
| 13***41 | Lines Group-Hydraulic; -High Pressure | 1 |
156-7007 Field Upgrade Kit
| 15***53 | Control Group-Parking Brake | 1 |
| 15***56 | Lines Group-Steering Neutralizer | 1 |
| 15***57 | Lines Group-Steering Neutralizer; -Rear | 1 |
156-7011 Field Upgrade Kit
| 13***39 | Lines Group-Brake Cooling; -Front Axle | 1 |
| 13***40 | Lines Group-Brake Cooling; -Rear Axle | 1 |
| 13***41 | Lines Group-Hydraulic; -High Pressure | 1 |
Operator Station
8x-0124 Air Conditioner Ar
| 3T***30 | Duct & Control Group | 1 |
| 3T***31 | Air Conditioner Group; Air Conditioner Group | 1 |
| 6K***80 | Grommet-To Hole Drilled In Dash As | 1 |
109-9785 Air Conditioner Ar
| 10***85 | Air Conditioner Ar | 1 |
| 11***55 | Air Conditioner Group | 1 |
| 12***70 | Gasket | 1 |
110-0355 Air Conditioner Gp
| 11***55 | Air Conditioner Group | 1 |
| 1B***82 | Nut-Special; (5/8-18 Thd) | 1 |
| 1K***02 | Washer (.0625" Thick) | 1 |
3t-2331 Air Conditioner Gp
| 1B***82 | Nut-Special; (5/8-18 Thd) | 1 |
| 1K***02 | Washer (.0625" Thick) | 1 |
| 1P***24 | Screw--To Clamp | 1 |
8y-5884 Armrest Gp -Lh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 1K***72 | Locknut Horn To Guard | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 1 |
8y-5911 Armrest Gp
| 3E***12 | Nut-Square; (3/8-16-Thd) | 1 |
| 6V***87 | Screw-Pan Head; (10-24x1-In) | 4 |
| 8S***03 | Ring-Retaining | 1 |
157-3899 Cab Gp
| 15***99 | Cab Group | 1 |
| 1F***50 | Nut Rops Support | 4 |
| 2Y***03 | Plug | 1 |
8x-1750 Cab Gp
| 1F***48 | Nut 12.70 mm(.50 In.) Thread | 4 |
| 1T***50 | Pin 7.93 mm(.312 In.) O.D. | 1 |
| 1V***42 | Nut; (1/4-20-Thd) | 10 |
7g-4497 Case As-Cab Heater
| 1J***81 | Nut (Weld) | 2 |
| 2B***40 | Nut-Full; (9/16-18-Thd) | 8 |
| 3H***66 | Stud-Weld; (1/4-20x0.625-In) | 5 |
3e-7122 Case As-Cab Heater
| 1F***50 | Nut Rops Support | 7 |
| 3E***22 | Case As-Cab Heater; Film-Stripe (Note A) | 1 |
| 3H***66 | Stud-Weld; (1/4-20x0.625-In) | 5 |
7n-4297 Compressor Gp-Refrigerant
| 01***11 | Screw; (10-16x0.25-In) | 3 |
| 14***97 | Valve As-Relief; (Refrigerant Compressor) | 1 |
| 1H***71 | Seal 20.22 mm(.796 In.)I. D. | 2 |
3e-3768 Compressor Gp-Refrigerant
| 01***11 | Screw; (10-16x0.25-In) | 3 |
| 14***97 | Valve As-Relief; (Refrigerant Compressor) | 1 |
| 1P***56 | Plate | 1 |
2w-0216 Compressor Gp-Refrigerant
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
179-6369 Condenser & Mtg Gp-Refrigerant
| 17***69 | Condenser & Mtg Group-Refrigerant | 1 |
| 17***71 | Condenser | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
129-0683 Condenser & Mtg Gp-Refrigerant
| 12***83 | Condenser & Mtg Group-Refrigerant | 1 |
| 13***54 | Condenser | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
4p-9307 Condenser Gp-Refrigerant
| 15***69 | Support As | 2 |
| 4P***07 | Condenser Group-Refrigerant | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 8 |
3p-7756 Console Gp-Return Air
| 2R***76 | Washer .787mm(.031 In.)Thick | 2 |
| 3P***56 | Console Group-Return Air | 1 |
| 3W***65 | Screw | 2 |
125-3401 Control Gp-Display Electronic
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***01 | Control Group-Display Electronic; -Indicator Strip | 1 |
| 3E***77 | Wedge-Receptacle Lock; (4-Pin) | 1 |
8x-0127 Control Gp-Handle
| 1B***30 | Nut 7.938 mm(.312 In.) Thick | 1 |
| 4V***93 | Lever Assem. | 1 |
| 4V***30 | Pin | 1 |
8x-0126 Control Gp-Hydraulic Hand
| 03***01 | Bolt; --To Reverse Shaft Bearing Retainer | 1 |
| 09***79 | Plug | 2 |
| 0L***66 | Spring-Hub Seal | 2 |
154-9679 Control Gp-Steering
| 09***14 | Hose As | 2 |
| 10***96 | .. Bearing., Plate | 2 |
| 13***07 | Elbow-45 Degree | 2 |
1v-4909 Control Gp-Steering
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 4 |
| 03***62 | Elbow, Swivel Nut 45 Degrees (-6) | 1 |
| 03***78 | Wheel-Hand Steering | 1 |
159-8661 Control Gp-Stic
| 10***29 | Actuator | 1 |
| 10***73 | Grip | 1 |
| 15***61 | Control Group-Stic | 1 |
4e-8413 Control Gp-Stic
| 15***61 | Control Group-Stic | 1 |
| 4E***20 | Base | 1 |
| 4E***27 | Housing | 1 |
177-4113 Control Gp-Stic
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***29 | Actuator | 1 |
| 10***73 | Grip | 1 |
4e-8410 Control Gp-Stic Lockout
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***60 | Switch As-Limit; (Stic Control Lock) | 1 |
| 14***66 | Lever As-Stic Steer Lockout | 1 |
187-5504 Control Gp-Stic Lockout
| 14***66 | Lever As-Stic Steer Lockout | 1 |
| 18***03 | Lever As-Stic Steer Lockout | 1 |
| 18***04 | Control Group-Stic Lockout | 1 |
157-6911 Control Gp-Transmission
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 18 |
| 10***29 | Retainer | 1 |
8x-0128 Control Gp-Transmission
| 01***70 | Setscrew | 2 |
| 01***71 | Setscrew-Socket; 7.93mm(.312in)Long | 3 |
| 1B***04 | Spacer; (6.8x10x9.5-mm Thk) | 2 |
165-8682 Control Gp-Unprgmed Monitor -Vids/Vims Main Module
| 10***85 | Battery; (Lithium)(Internal Backup) | 1 |
| 13***20 | Film-Identification; (Vids, Vims Main Module) | 1 |
| 16***82 | Control Group-Unprgmed Monitor; -Vids/Vims Main Module | 1 |
8x-5993 Cover Gp-Platform
| 8T***36 | Capscrew; (Hex Hd) (M10 X 1.50 X 25l Gr 10.9) | 2 |
| 8T***22 | Washer-Plated; (11x32x2.5-mm Thk) | 2 |
| 8X***19 | Cover As | 1 |
8x-6017 Cover Gp-Platform
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 8 |
| 8T***36 | Capscrew; (Hex Hd) (M10 X 1.50 X 25l Gr 10.9) | 8 |
| 8X***88 | Cover As | 1 |
8x-6019 Cover Gp-Platform
| 2D***16 | Washer | 2 |
| 5B***83 | Nut-Jam; (9/16-18-Thd) | 4 |
| 6H***56 | Roll Pin--Lever To Compression Release Control Shaft | 1 |
1v-4862 Cushion Gp-Arm
| 0T***42 | Bolt | 4 |
| 1V***62 | Cushion Group-Arm | 1 |
| 4V***47 | Cushion As-Arm | 1 |
3e-8946 Display Gp-Payload Monitor
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 0 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 0 |
| 3E***82 | Receptacle As-Connector; (6-Pin) | 1 |
7v-8803 Door Gp-Cab
| 2M***19 | Ring-Retaining | 1 |
| 3V***67 | Handle | 1 |
| 3V***95 | Pocket Assem. | 1 |
3t-2330 Duct & Control Gp
| 2P***39 | Nut--Switch Assembly To Bracket Assembly | 2 |
| 2V***99 | Knob-Control; (Tempurature Variable Control) | 3 |
| 3H***18 | Pin (1/2" Long) | 4 |
8y-5874 Extension Gp-Backrest -Cloth
| 8Y***74 | Extension Group-Backrest; Backrest Extension Group | 1 |
| 8Y***77 | Pan As-Extension | 1 |
| 8Y***43 | Cushion Kit; (Consists Of Fastener, Cushion Assem.) | 1 |
123-2847 Fastener Gp-Rops
| 11***84 | Spacer; (9.0mm Thk) | 48 |
| 12***32 | Plate-Spacer | 2 |
| 12***47 | Fastener Group-Rops | 1 |
8x-0646 Fastener Gp-Rops
| 3S***23 | Washer 5.7 cm(2.24 In.)O.D. | 48 |
| 8T***24 | Bolt; (M30x3.5x180-mm) | 48 |
| 8X***46 | Fastener Group-Rops | 1 |
169-9516 Fastener Gp-Rops
| 11***84 | Spacer; (9.0mm Thk) | 60 |
| 16***16 | Fastener Group-Rops | 1 |
| 3E***50 | Bolt; (M30x3.5x220mm Thd) | 60 |
8p-4732 Filter Gp-Cab Air
| 03***43 | Screw; (1/4-20x0.625-In) | 8 |
| 3P***56 | Console Group-Return Air | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 7 |
8p-5396 Filter Gp-Cab Air
| 1S***90 | Spring-Governor | 2 |
| 8P***42 | Seal | 1 |
| 8P***43 | Filter Element-Cab Air; (Air Flow) | 1 |
3t-2329 Heater Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 15***61 | Wedge-Plug Lock; (2-Pin) | 1 |
8x-1752 Heater Gp-Cab
| 1V***52 | Switch Group-Toggle | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 3T***00 | Heater Group-Cab | 1 |
3t-1500 Heater Gp-Cab
| 17***03 | Motor As-Electric | 1 |
| 1M***30 | Nut And Lock Assem.; (No. 10-32) | 2 |
| 2M***44 | Screw-Tapping; (No 8-18x.299-In) | 10 |
122-4556 Horn Gp-Air -Lh
| 12***56 | Horn Group-Air; -Lh | 1 |
| 2H***23 | Grommet (1.375" Inside Diameter) | 1 |
| 2H***24 | Grommet (.875" Inside Diameter) | 1 |
5d-6998 Horn Gp-Air
| 15***87 | Cover | 2 |
| 2G***64 | Kit-Diaphragm; (Air Horn) | 2 |
| 4B***75 | Washer (1.75 In. Outside Diameter) | 1 |
122-4557 Horn Gp-Air -Rh
| 12***57 | Horn Group-Air; -Rh | 1 |
| 2H***23 | Grommet (1.375" Inside Diameter) | 1 |
| 2H***24 | Grommet (.875" Inside Diameter) | 1 |
8x-0031 Horn Gp-Air
| 2H***23 | Grommet (1.375" Inside Diameter) | 2 |
| 2H***24 | Grommet (.875" Inside Diameter) | 2 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 4 |
8y-6862 Housing Gp-Seat Suspension
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
| 8Y***45 | Kit-Suspension Knob; (Height Adjustment)(Suspension Seat) | 1 |
108-4588 Housing Gp-Seat Suspension
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
152-8963 Lines Gp-Air Conditioner -Cab
| 00***04 | Fitting-Flared | 2 |
| 00***04 | Fitting; (Barbed (90 Deg)) | 4 |
| 03***64 | Elbow (90 Degrees) | 2 |
8x-1753 Lines Gp-Air Conditioner
| 00***25 | Elbow-Flared | 2 |
| 1P***78 | Clamp; (Hose) | 8 |
| 1S***47 | Seal 17.17 mm. (.676 In.) I.D. | 3 |
109-9784 Lines Gp-Air Conditioner
| 00***25 | Elbow-Flared | 2 |
| 10***84 | Lines Group-Air Conditioner | 1 |
| 10***90 | Hose As | 1 |
109-9783 Lines Gp-Air Conditioner
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
| 10***33 | Receiver-Refrigerant Dryer | 1 |
8x-0038 Lines Gp-Air Conditioner
| 1S***47 | Seal 17.17 mm. (.676 In.) I.D. | 1 |
| 2L***24 | Cap-Air Conditioner Valve; (7/16 X 20 Thd) | 1 |
| 2P***56 | Strap - Motor | 2 |
152-8932 Lines Gp-Air Conditioner
| 13***10 | Hose As | 1 |
| 13***11 | Hose As | 1 |
| 13***42 | Hose As | 1 |
8x-0042 Lines Gp-Cab Heater
| 1V***22 | Tag-Identification; (Letters Spl) | 2 |
| 1V***23 | Tag-Identification; (Letters Ret) | 2 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 4 |
8x-0714 Lines Gp-Cab Heater
| 1P***09 | Knob--To Rod | 1 |
| 2L***17 | Screw-Machine; (10-32x7.9-mm) | 2 |
| 3H***18 | Pin (1/2" Long) | 1 |
107-0257 Mirror Gp
| 10***49 | Bracket | 1 |
| 10***57 | Mirror Group | 1 |
| 4E***24 | Tube | 1 |
107-0256 Mirror Gp
| 10***56 | Mirror Group | 1 |
| 4E***22 | Tube | 1 |
| 4E***23 | Tube | 1 |
4v-4129 Mirror Gp-Rear View
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 8 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 4 |
| 4V***25 | Clamp | 4 |
149-2357 Module Gp-Message Center -Vids
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***57 | Module Group-Message Center; -Vids-Vids, Vims | 1 |
149-3255 Module Gp-Monitor Keypad
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***68 | Board Assembly | 1 |
| 14***55 | Module Group-Monitor Keypad; -Vims | 1 |
116-3790 Monitor Gp-Payload
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***09 | Kit-Connecting Plug; (4-Pin)(Sensor Wiring Harness) | 1 |
| 11***90 | Monitor Group-Payload | 1 |
123-4075 Monitor Gp-Payload
| 11***75 | Harness As | 1 |
| 11***76 | Harness As | 1 |
| 11***04 | Arm-Bail | 1 |
8x-1364 Mounting Gp-Platform
| 2V***15 | Plate | 2 |
| 6V***89 | Clip (28.58mm Id) | 1 |
| 6V***65 | Clip (Clip Under Hydraulic Tank) | 2 |
8x-1747 Mounting Gp-Platform
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 12 |
| 7X***52 | Bolt-Plt; (M16 X 2.0 X 30) | 8 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 8 |
8x-0625 Mounting Gp-Platform
| 6V***89 | Clip (28.58mm Id) | 3 |
| 6V***65 | Clip (Clip Under Hydraulic Tank) | 2 |
| 8E***41 | Mount As | 8 |
109-8214 Mounting Gp-Platform Bracket
| 10***13 | Plate As | 1 |
| 10***14 | Mounting Group-Platform Bracket | 1 |
| 8T***90 | Nut-Weld (M10x1.5-6h Thd) | 3 |
8y-5909 Pan Gp-Backrest -Back
| 2F***06 | Screw-Machine (6-32x. 25in); (6-32x0.25-In) | 1 |
| 3E***35 | Clip | 1 |
| 3E***36 | Stud-Ball | 1 |
108-8421 Pan Gp-Backrest -Lumbar
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
| 10***23 | Shaft As-Lumbar | 1 |
| 10***24 | Pan-Lumbar | 1 |
8y-5992 Pan Gp-Seat
| 3K***97 | Pin 3.18 mm(.125 In.) Diameter | 4 |
| 6V***56 | Ring-Retaining | 2 |
| 8Y***92 | Pan As-Seat; (Bottom) | 1 |
8x-1755 Panel Gp-Instrument
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 21***89 | Bezel; (Lh) | 1 |
| 2G***51 | Socket As (Each Includes:) | 2 |
8x-0626 Panel Gp-Instrument
| 1H***44 | Lockwasher (Bracket To Cab) | 8 |
| 1P***22 | Grommet | 2 |
| 2S***27 | Gronmet | 2 |
8x-1754 Panel Gp-Instrument
| 2G***51 | Socket As (Each Includes:) | 1 |
| 2V***71 | Angle | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
152-8966 Panel Gp-Instrument
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***63 | Actuator; (Turn Signal) | 1 |
| 11***66 | Actuator-Rocker | 1 |
6v-6561 Wiper Pivot Gp
| 6A***18 | Washer; (8.1x12.5x1-mm Thk) | 1 |
| 6V***07 | Shaft As; (Pivot) | 1 |
| 6V***09 | Cap-Wiper | 1 |
122-4554 Platform Ar
| 10***14 | Mounting Group-Platform Bracket | 1 |
| 12***54 | Platform Ar | 1 |
| 12***72 | Platform Ar | 1 |
122-4572 Platform Ar
| 10***46 | Air Dryer Group | 1 |
| 12***57 | Horn Group-Air; -Rh | 1 |
| 12***61 | Lines Group-Air Tank | 1 |
122-4577 Platform Ar
| 10***68 | Mounting Group-Battery | 1 |
| 12***72 | Platform Ar | 1 |
| 12***77 | Platform Ar | 1 |
122-4555 Platform Ar -Lh
| 10***57 | Film; (192 cm) | 0 |
| 12***55 | Platform Ar; -Lh | 1 |
| 12***56 | Horn Group-Air; -Lh | 1 |
8x-0044 Platform Gp
| 10***86 | Door As | 1 |
| 10***91 | Door As | 1 |
| 10***11 | Plate As | 1 |
8x-1756 Platform Gp
| 10***64 | Plate | 1 |
| 10***33 | Plate As | 1 |
| 10***79 | Cover As | 1 |
122-4558 Platform Gp-Operator
| 10***86 | Door As | 1 |
| 10***91 | Door As | 1 |
| 10***12 | Plate As | 1 |
122-4573 Platform Gp-Operator
| 10***11 | Plate As | 1 |
| 12***73 | Platform Group-Operator | 1 |
| 22***63 | Plate As | 1 |
162-7304 Rops Ar
| 10***53 | Film-Stripe; (Caterpillar)(Caterpillar) | 1 |
| 16***28 | Wiring Group-Rops | 1 |
| 16***04 | Rops Ar | 1 |
165-4011 Rops Gp
| 16***00 | Canopy As | 1 |
| 16***11 | Rops Group | 1 |
| 8D***06 | Eye-Lifting | 2 |
8x-0627 Rops Gp
| 8D***06 | Eye-Lifting | 2 |
| 8T***90 | Nut-Weld (M10x1.5-6h Thd) | 4 |
| 8T***39 | Capscrew; (Hex Hd) (M12 X 1.75 X 30l Gr 10.9) | 16 |
8x-1767 Seat Ar
| 8T***96 | Washer-Hard- Line From Pipe As. To Gear | 4 |
| 8T***56 | Bolt; (3/8-16x1.25-In) | 4 |
| 8X***67 | Seat Ar | 1 |
153-3360 Seat Ar-Stic
| 12***04 | Support Group-Steering Control | 1 |
| 15***60 | Seat Ar-Stic | 1 |
| 15***79 | Control Group-Steering | 1 |
122-4617 Seat Belt Gp -Retractable
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 4D***32 | Locknut (7/16-20 Thd) | 1 |
156-1148 Seat Belt Gp -Retractable
| 15***48 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 1L***80 | Bolt; (7/16-20x1.5-In) | 1 |
8y-3792 Seat Belt Gp -Retractable
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 1 |
| 8Y***92 | Seat Belt Group; -Retractable-Operator | 1 |
8y-6857 Seat Belt Gp -Operator
| 0T***44 | Bolt (1.25" Long) | 1 |
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 2 |
| 7X***10 | Washer-Hard; (15.5x29x3-mm Thk) | 2 |
156-1149 Seat Belt Gp
| 15***49 | Seat Belt Group; -Retractable | 1 |
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 1 |
| 7X***10 | Washer-Hard; (15.5x29x3-mm Thk) | 1 |
8y-6802 Seat Gp
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 8Y***74 | Extension Group-Backrest; Backrest Extension Group | 1 |
| 8Y***02 | Seat Group | 1 |
8y-6804 Seat Gp -Cloth
| 06***03 | Shim (.060mm Thk); (1.52-mm Thk) | 4 |
| 09***78 | Pin-Spring | 1 |
| 09***14 | Pin, Clevis | 1 |
8x-3527 Seat Gp
| 05***84 | Spacer; (10x15x8.5-mm Thk) | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 2 |
8y-4903 Seat Gp
| 10***39 | Kit-Boot | 1 |
| 8W***95 | Cushion-Seat | 1 |
| 8W***96 | Cushion-Headrest | 1 |
8y-5986 Seat Gp -Cloth, Lumbar
| 06***03 | Shim (.060mm Thk); (1.52-mm Thk) | 4 |
| 09***78 | Pin-Spring | 1 |
| 1C***69 | Bolt (1/2 In. Long 5/16 In. Dia.); Support Assembly To Heater Group | 2 |
8y-5588 Seat Gp-Suspension
| 10***87 | Suspension Group-Seat; -Adjustable | 1 |
| 4F***79 | Bolt Clip To Tube Assembly (Aftercooler Radiator Inlet) | 1 |
| 8Y***92 | Seat Belt Group; -Retractable-Operator | 1 |
109-1658 Seat Gp-Suspension
| 10***39 | Kit-Boot | 1 |
| 10***58 | Seat Group-Suspension | 1 |
| 11***40 | Frame As-Seat | 1 |
9u-0705 Seat Gp-Suspension
| 11***07 | Suspension Group-Seat | 1 |
| 14***04 | Suspension Group-Seat; -Air | 1 |
| 16***25 | Kit-Slider Block; (Seat) | 1 |
123-8704 Support Gp-Steering Control
| 01***02 | Lockwasher | 1 |
| 09***58 | Screw-Machine; (M6x1x14-mm) | 4 |
| 09***47 | Nut-Thin; (M16x2 Thd) | 1 |
108-4587 Suspension Gp-Seat
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
8y-5982 Suspension Gp-Seat -Variable
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
| 10***96 | Kit-Suspension Shaft; ((Includes Bearings) | 1 |
149-2404 Suspension Gp-Seat -Air
| 10***17 | Bumper | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***57 | Shaft | 2 |
8r-1036 Window Gp
| 03***44 | Rivet (For Outside Japan); Rivet (For Outside Japan) | 4 |
| 3C***70 | Nut; (M5x0.8-Thd) | 4 |
| 8C***38 | Screw-Pan Head; (6-20x1-In) | 2 |
104-7325 Window Gp-Sliding
| 03***44 | Rivet (For Outside Japan); Rivet (For Outside Japan) | 4 |
| 10***25 | Window Group | 1 |
| 10***26 | Rail-Rh | 1 |
9c-5875 Window Gp-Sliding
| 03***44 | Rivet (For Outside Japan); Rivet (For Outside Japan) | 4 |
| 3C***70 | Nut; (M5x0.8-Thd) | 4 |
| 8C***38 | Screw-Pan Head; (6-20x1-In) | 2 |
8x-3534 Wiper & Washer Gp-Window
| 14***95 | Hose; (650-cm Each) | 0 |
| 19***71 | Hose; (116-cm) | 0 |
| 22***35 | Arm Group-Window Wiper | 1 |
8x-1751 Wiper & Washer Gp-Window
| 3T***62 | Wiper Group-Window; -Rear | 1 |
| 3V***16 | Nozzle As; (Rear) | 1 |
| 4B***69 | Washer Brackets To Firewall Assembly | 1 |
3t-7062 Wiper Gp-Window
| 10***44 | Motor Group-Window Wiper; (24-Volt)(24-Volt) | 1 |
| 3C***84 | Screw-Machine; (M5x0.8 Bg Thd) | 4 |
| 3T***59 | Bracket | 1 |
Power Train
6y-4543 Valve Gp-Lockup Clutch & Sol -Torque Converter
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 3 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
| 1S***36 | Retainer | 2 |
8x-0131 Axle Ar-Fixed
8x-0133 Axle Ar-Oscillating
8x-0132 Axle Gp-Fixed -Front
8x-0134 Axle Gp-Oscillating -Rear
6y-4270 Case & Parts Gp-Planetary
110-4529 Case Gp-Gear
6y-7184 Control Gp-Transmission Hyd
4p-1661 Core Gp-Tmsn Oil Cooler
6y-5845 Coupling Gp
7i-4899 Coupling Gp
148-2711 Coupling Gp-Auxiliary Drive
118-8274 Coupling Gp-Torsional
8x-9735 Cover Gp-Front
8x-8204 Cover Gp-Rear
6y-5542 Cover Gp-Shipping
110-4809 Cover Gp-Shipping
| 11***09 | Cover Group-Shipping | 1 |
| 1J***06 | Cover | 1 |
| 1P***85 | Flange-Half | 2 |
8r-5734 Differential & Bevel Gear Gp
| 12***62 | Shaft-Bevel Pinion | 1 |
| 13***26 | Gear Set-Bevel | 1 |
| 1N***75 | Cone Output Shaft Rear | 1 |
8r-4202 Differential & Bevel Gear Gp
| 12***62 | Shaft-Bevel Pinion | 1 |
| 1N***75 | Cone Output Shaft Rear | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
119-1792 Differential & Bevel Gear Gp
| 11***92 | Differential & Bevel Gear Group | 1 |
| 12***58 | Carrier As | 1 |
| 12***50 | Differential Group | 1 |
119-1791 Differential & Bevel Gear Gp
| 11***91 | Differential & Bevel Gear Group | 1 |
| 12***58 | Carrier As | 1 |
| 12***50 | Differential Group | 1 |
120-0550 Differential Gp
| 12***50 | Differential Group | 1 |
| 12***51 | Case As-Differential | 1 |
| 2F***64 | Nut; (2-1/8-12-Thd) | 4 |
8r-4203 Differential Gp
| 11***91 | Washer-Thrust | 4 |
| 33***09 | Gear-Bevel; (20-Teeth) | 2 |
| 8C***62 | Screw-Flat Head; (M8x1.25x20-mm) | 4 |
6y-5796 Drive Gp-Pump -Rear
| 1P***36 | Cup--To Ahead & Astern Shafts Front | 4 |
| 1P***62 | Cone--To Ahead & Astern Shafts Front | 4 |
| 2B***04 | Clip (1.062" Long); (1/4 In Id Opening) | 8 |
7i-5115 Drive Gp-Pump -Rear
| 10***29 | Flange | 1 |
| 1P***36 | Cup--To Ahead & Astern Shafts Front | 4 |
| 1P***62 | Cone--To Ahead & Astern Shafts Front | 4 |
8x-7924 Drive Gp-Pump
| 03***97 | Ring-Retaining | 2 |
| 06***36 | Breather-Case | 2 |
| 13***73 | Bracket-Link | 2 |
8x-0086 Drive Gp-Pump -Front
| 6T***80 | Mount-Rubber | 8 |
| 6V***88 | Nut-Self Locking; (M20x2.50 Thd) | 4 |
| 7I***04 | Bracket As | 1 |
8x-1740 Fastener Gp-Fixed Axle
| 15***86 | Bolt; (M36x4x480-mm) | 20 |
| 25***14 | Spacer; (40.5x67x32-mm Thk) | 20 |
| 5T***96 | Spacer; (40.5x67x12-mm Thk) | 20 |
8x-1741 Fastener Gp-Oscillating Axle
| 3S***62 | Washer-Hard; (40.5x67x6-mm Thk) | 24 |
| 8X***41 | Fastener Group-Oscillating Axle | 1 |
| 9X***98 | Bolt | 24 |
8x-0087 Filler Gp-Power Train Oil
| 1P***82 | Flange-Half | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 4 |
8x-8494 Filler Gp-Power Train Oil
| 10***92 | Gauge As-Sight | 1 |
| 10***96 | Block | 1 |
| 10***97 | Hose | 1 |
8x-1326 Filter & Mtg Gp-Power Train
| 1R***20 | Filter Element As-Oil | 2 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 2 |
| 3E***68 | Switch Group; -Transmission Filter-Filter | 2 |
7i-4819 Filter & Mtg Gp-Power Train
| 5M***62 | Bolt; (3/8-16x0.75-In) | 4 |
| 7I***19 | Filter & Mtg Group-Power Train | 1 |
| 7I***84 | Bracket | 1 |
165-8429 Filter Gp-Oil -Power Train
| 13***76 | Filter Element As-Oil; (Ultra High Efficiency)(Ultra High Efficiency) | 1 |
| 13***79 | Housing As-Oil Filter | 1 |
| 13***98 | Spring | 1 |
8e-0457 Filter Gp-Oil -Transmission
| 2J***56 | Ring-Retaining | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
| 3S***52 | Spring | 1 |
108-1095 Filter Gp-Oil -Front Pump Drive
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***95 | Filter Group-Oil; -Front Pump Drive | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
202-3114 Gear Gp-Input Transfer
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 28 |
| 14***30 | Bearing | 4 |
| 16***15 | Gear-Sun; (38-Teeth) | 1 |
6y-4271 Gear Gp-Input Transfer
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 28 |
| 14***30 | Bearing | 4 |
| 17***15 | Seal-Lip Type | 1 |
9u-8884 Gear Gp-Output Transfer
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 16 |
6y-4272 Gear Gp-Output Transfer
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 16 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
9u-8885 Gear Gp-Speed Sensor
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 2 |
| 11***64 | Adapter-Speed Sensor Drive | 1 |
| 1B***67 | Ball Bearing | 1 |
8x-1716 Lines Gp-Axle Oil Cooler
| 1S***94 | Clip-R.H. Side Engine Support | 6 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 4 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 4 |
8x-1718 Lines Gp-Axle Oil Cooler
| 1P***78 | Flange; (To 5v***09 Tube Assembly) | 4 |
| 1P***79 | Flange (Half) | 2 |
| 1P***82 | Flange-Half | 2 |
103-5451 Lines Gp-Axle Oil Cooler
| 10***18 | Block | 1 |
| 10***19 | Block | 1 |
| 10***17 | Hose As | 1 |
8x-1715 Lines Gp-Axle Oil Cooler
| 14***48 | Tube As | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 4 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 4 |
8x-1717 Lines Gp-Axle Oil Cooler
| 12***09 | Guard As | 1 |
| 15***26 | Union Assembly | 2 |
| 4W***53 | Spacer; (13.5x25x38.1-mm Thk) | 2 |
8x-0073 Lines Gp-Drain -Engine Oil Pan, Coolers, Transmission
| 10***39 | Plug-Drain; (Engine Oil Pan) | 1 |
| 10***40 | Adapter-Plug | 1 |
| 1H***79 | Adapter,Straight,Pi Hose To Valve Assembly | 2 |
8x-0063 Lines Gp-Pump Drive
| 2A***59 | Hose As | 1 |
| 2A***60 | Hose As | 1 |
| 2A***61 | Hose As | 1 |
138-4345 Lines Gp-Pump Drive -Front
| 10***95 | Filter Group-Oil; -Front Pump Drive | 1 |
| 10***11 | Tee-O-Ring | 1 |
| 13***81 | Hose As | 1 |
8x-8492 Lines Gp-Torque Conv Cooler
| 10***77 | Block | 2 |
| 10***78 | Flange | 1 |
| 10***96 | Hose As | 1 |
8x-0079 Lines Gp-Torque Conv Cooler
| 1B***86 | Bolt-Bracket Assembly To Timing Gear | 1 |
| 1P***06 | Seal; 57.9mm(2.28in.)I.D. | 5 |
| 1P***09 | Seal-Rectangular | 2 |
8x-3533 Mounting Gp-Bevel Gear
| 27***42 | Bolt; (M30x3.5x80-mm) | 36 |
| 2H***32 | Seal--To Bottom Cover On Selector Valve | 1 |
| 3D***95 | Seal-O-Ring | 1 |
8x-1316 Mounting Gp-Rim
| 2D***08 | Grommmet | 1 |
| 5T***96 | Connector | 1 |
| 5T***66 | Locknut; (11/16-24-Thd) | 4 |
170-3917 Mounting Gp-Rim
| 17***17 | Mounting Group-Rim | 1 |
| 17***89 | Hose As | 1 |
| 2D***08 | Grommmet | 1 |
8x-0121 Mounting Gp-Transmission
| 2A***38 | Bolt-(3/4" X 2-1/4")-Rops Mounting Bracket To Fender | 16 |
| 3S***23 | Washer 5.7 cm(2.24 In.)O.D. | 6 |
| 5P***48 | Washer--Bracket To L.H. Support Rail | 16 |
8x-1731 Neutralizer Gp-Transmission
| 10***22 | Harness As | 1 |
| 1H***93 | Lockwasher (External Tooth) | 5 |
| 1S***46 | Screw-Machine; (8-32x0.437-Thd) | 5 |
6y-4269 Planetary Gp-Transmission
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 6 |
202-1015 Planetary Gp-Transmission
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 6 |
8x-0065 Pump & Mtg Gp-Drive Lube
| 6V***78 | Seal-O-Ring | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
| 8T***95 | Capscrew; (Hex Hd) (M10 X 1.50 X 30l Gr 10.9) | 2 |
6y-5797 Pump Gp-Gear
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 9 |
| 1B***14 | Key-Woodruff | 1 |
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 1 |
8e-1164 Pump Gp-Gear
| 1B***14 | Key-Woodruff | 1 |
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 1 |
| 4S***34 | Washer-Hard; (20x30x3-mm Thk) | 1 |
6y-5798 Pump Gp-Gear
| 1B***36 | Key-Woodruff | 2 |
| 1M***09 | Bearing-Sleeve | 2 |
| 2B***73 | Key-Woodruff | 1 |
8e-1163 Pump Gp-Transmission
| 1B***36 | Key-Woodruff | 2 |
| 1M***09 | Bearing-Sleeve | 2 |
| 2B***73 | Key-Woodruff | 1 |
123-5170 Rim Ar
| 10***76 | Rim Group-Demountable | 4 |
| 12***70 | Rim Ar | 1 |
| 13***13 | Rim Group-Demountable | 4 |
123-5165 Rim Ar
| 10***67 | Rim Group-Demountable | 4 |
| 12***65 | Rim Ar | 1 |
| 13***85 | Rim Group-Demountable | 4 |
123-5168 Rim Ar
| 10***77 | Rim Group-Demountable | 4 |
| 12***68 | Rim Ar | 1 |
| 13***12 | Rim Group-Demountable | 4 |
109-7129 Rim As
| 10***29 | Rim As | 1 |
108-5476 Rim Gp-Demountable
| 10***76 | Rim Group-Demountable | 1 |
| 10***88 | Band-Bead Seat | 1 |
| 10***89 | Flange | 2 |
170-3919 Rim Gp-Demountable
| 16***41 | Band-Bead Seat | 1 |
| 17***61 | Rim As | 1 |
| 17***19 | Rim Group-Demountable | 1 |
109-9667 Rim Gp-Demountable
| 10***03 | Flange | 2 |
| 10***88 | Band-Bead Seat | 1 |
| 10***31 | Rim As | 1 |
8x-0123 Rim Gp-Demountable
| 10***98 | Band-Bead Seat | 1 |
| 8R***14 | Rim As | 1 |
| 8W***35 | Ring-Lock | 1 |
170-3918 Rim Gp-Demountable
| 16***41 | Band-Bead Seat | 1 |
| 17***61 | Rim As | 1 |
| 17***18 | Rim Group-Demountable | 1 |
138-8612 Rim Gp-Demountable
| 10***03 | Flange | 2 |
| 13***11 | Rim As | 1 |
| 13***12 | Rim Group-Demountable | 1 |
138-8613 Rim Gp-Demountable
| 10***89 | Flange | 2 |
| 13***11 | Rim As | 1 |
| 13***13 | Rim Group-Demountable | 1 |
108-5477 Rim Gp-Demountable
| 10***03 | Flange | 2 |
| 10***77 | Rim Group-Demountable | 1 |
| 10***88 | Band-Bead Seat | 1 |
138-7585 Rim Gp-Demountable
| 13***84 | Rim As | 1 |
| 13***85 | Rim Group-Demountable | 1 |
| 16***41 | Band-Bead Seat | 1 |
113-7098 Rim Gp-Single
| 10***77 | Rim Group-Demountable | 1 |
| 10***29 | Rim As | 1 |
| 11***98 | Rim Group-Single | 1 |
101-9048 Rim Gp-Single -Spare
| 10***48 | Rim Group-Single; -Spare | 1 |
| 10***67 | Rim Group-Demountable | 1 |
| 13***85 | Rim Group-Demountable | 1 |
113-7097 Rim Gp-Single
| 10***76 | Rim Group-Demountable | 1 |
| 10***29 | Rim As | 1 |
| 11***97 | Rim Group-Single | 1 |
105-3235 Shaft Gp-Drive
| 10***35 | Shaft Group-Drive | 1 |
| 11***48 | Universal Joint Group; -Rear | 1 |
| 9X***80 | Bolt; (M20x2.5x90-mm) | 8 |
8r-9316 Shaft Gp-Drive
| 8R***09 | Shaft-Governor Control | 1 |
| 8R***16 | Shaft Group-Drive | 1 |
| 9C***01 | Spider & Bearing Group | 1 |
104-4751 Shaft Gp-Drive -Main; Center, Front
| 10***12 | Yoke | 1 |
| 10***51 | Shaft Group-Drive; -Main; Center, Front | 1 |
| 10***52 | Retainer-Seal | 1 |
8r-4207 Shaft Gp-Drive
| 1H***78 | Seal-O-Ring | 1 |
| 2V***72 | Guard | 1 |
| 4L***64 | Seal Water Lines To Oil Cooler | 1 |
8r-4206 Shaft Gp-Input Drive
| 8R***06 | Shaft Group-Input Drive | 1 |
| 8R***31 | Slip Joint Group | 1 |
| 9X***80 | Bolt; (M20x2.5x90-mm) | 8 |
8r-4208 Shaft Gp-Pump Drive -Rear
| 1H***78 | Seal-O-Ring | 1 |
| 2D***40 | Seal-Lip Type | 2 |
| 2H***33 | Seal ("O" Ring) | 1 |
8x-0093 Shaft Gp-Pump Drive -Front
| 8R***10 | Slip Joint Group; -Front Pump Drive Shaft | 1 |
| 8T***81 | Bolt; (M16x2.0x80mm) | 8 |
| 8X***93 | Shaft Group-Pump Drive; -Front | 1 |
8x-8248 Shaft Gp-Pump Drive Input
| 14***49 | Shaft As-Input | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 18 |
8r-8510 Slip Joint Gp -Front Pump Drive Shaft
| 10***33 | Spider & Bearing Group | 2 |
| 2G***63 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
8r-9320 Slip Joint Gp
| 8R***20 | Slip Joint Group | 1 |
| 8R***21 | Slip Joint Group | 1 |
| 8R***22 | Slip Joint Group | 1 |
8r-7032 Slip Joint Gp
| 8R***30 | Slip Joint Group | 1 |
| 8R***32 | Slip Joint Group | 1 |
| 8R***33 | Slip Joint Group | 1 |
8r-7030 Slip Joint Gp
| 1P***96 | Seal-Lip Type | 1 |
| 3B***88 | Fitting-Grease; (Ejector Guide Rollers) | 1 |
| 7K***80 | Ring-Retaining | 1 |
8r-8515 Slip Joint Gp
| 8R***15 | Slip Joint Group | 1 |
| 8R***20 | Slip Joint Group | 1 |
| 9C***01 | Spider & Bearing Group | 2 |
8r-9321 Slip Joint Gp
| 1K***53 | Fitting (Pressure Relief) | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
| 5T***82 | Kit-Seal | 1 |
8r-9322 Slip Joint Gp
| 2V***04 | Ring-Retaining | 1 |
| 2V***05 | Seal-Lip Type | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
112-6549 Slip Joint Gp
| 11***49 | Slip Joint Group | 1 |
| 8R***32 | Slip Joint Group | 1 |
| 8X***32 | Spider & Bearing Group | 2 |
112-4885 Slip Joint Gp
| 11***85 | Slip Joint Group | 1 |
| 11***86 | Shaft As | 1 |
| 11***36 | Cup-Dust | 1 |
8r-7033 Slip Joint Gp
| 16***17 | Cup-Dust | 1 |
| 1K***53 | Fitting (Pressure Relief) | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
8r-7031 Slip Joint Gp
| 8R***31 | Slip Joint Group | 1 |
| 8R***32 | Slip Joint Group | 1 |
| 8R***36 | Spider & Bearing Group | 2 |
9c-3101 Spider & Bearing Gp
| 2V***44 | Spider & Bearing Group; (Twin Disc) | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
| 9C***01 | Spider & Bearing Group | 1 |
8r-7036 Spider & Bearing Gp
| 8R***34 | Spider & Bearing Group | 1 |
| 8R***36 | Spider & Bearing Group | 1 |
| 8X***32 | Spider & Bearing Group | 1 |
6y-5688 Torque Converter Gp
| 03***80 | Bolt 4.128 cm(1.625 In.) Long | 14 |
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 17 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 9 |
111-3191 Torque Converter Gp
| 06***58 | Ball Bearing | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 18 |
| 0S***02 | Bolt; (5/8-18x3.5-In) | 3 |
6y-5690 Torque Converter Gp
| 03***80 | Bolt 4.128 cm(1.625 In.) Long | 14 |
| 1A***22 | Bolt-Generator To Flywheel Housing | 2 |
| 1F***06 | Dowel | 2 |
111-3192 Torque Converter Gp
| 03***80 | Bolt 4.128 cm(1.625 In.) Long | 14 |
| 11***91 | Torque Converter Group | 1 |
| 11***92 | Torque Converter Group | 1 |
6y-5687 Torque Converter Gp
| 06***58 | Ball Bearing | 1 |
| 0L***28 | Bolt 10.16 mm(4 In.) Long | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 12 |
6y-5689 Torque Converter Gp
| 06***58 | Ball Bearing | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 18 |
| 0S***02 | Bolt; (5/8-18x3.5-In) | 3 |
9u-8883 Transmission Ar
| 20***15 | Planetary Group-Transmission | 1 |
| 20***14 | Gear Group-Input Transfer | 1 |
| 6Y***69 | Planetary Group-Transmission | 1 |
6y-4268 Transmission Ar
| 6Y***68 | Transmission Ar | 1 |
| 6Y***69 | Planetary Group-Transmission | 1 |
| 6Y***70 | Case & Parts Group-Planetary | 1 |
104-4753 Universal Joint Gp
| 10***53 | Universal Joint Group | 1 |
| 10***54 | Shaft | 1 |
| 9C***01 | Spider & Bearing Group | 1 |
8r-8514 Universal Joint Gp
| 8R***14 | Universal Joint Group | 1 |
| 8R***17 | Universal Joint Group | 1 |
| 9C***01 | Spider & Bearing Group | 2 |
112-6547 Universal Joint Gp -Front Drive Shaft
| 10***54 | Shaft | 1 |
| 11***47 | Universal Joint Group; -Front Drive Shaft | 1 |
| 8R***36 | Spider & Bearing Group | 1 |
8r-9317 Universal Joint Gp
| 8R***17 | Universal Joint Group | 1 |
| 8R***18 | Universal Joint Group | 1 |
112-6548 Universal Joint Gp -Rear
| 11***48 | Universal Joint Group; -Rear | 1 |
| 8R***18 | Universal Joint Group | 1 |
| 8X***32 | Spider & Bearing Group | 2 |
8r-8509 Universal Joint Gp
| 4E***68 | Shaft-Governor Control | 1 |
| 8P***32 | Spider & Bearing Group | 1 |
| 8R***09 | Universal Joint Group | 1 |
216-5342 Valve Gp-Modulating -Torque Converter Lockup Clutch
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 21***42 | Valve Group-Modulating; -Torque Converter Lockup Clutch | 1 |
217-2708 Valve Gp-Modulating -Tc Impeller Clutch
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
| 18***10 | Washer | 1 |
9g-6598 Valve Gp-Neutralizer
| 5H***53 | "O" Ring | 1 |
| 6P***69 | Spool | 1 |
| 6P***73 | Seal-Ring | 1 |
9w-7403 Valve Gp-Relief
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1L***62 | Ring-Retaining | 1 |
| 2P***38 | Spool Assembly, Including:- | 1 |
6y-0723 Valve Gp-Selector -Clutch Oil Distribution
| 2B***95 | Cap Screw--Tube Assembly To Air Inlet Pipe | 2 |
| 33***70 | Manifold-Bottom | 1 |
| 5P***61 | Ring-Retaining | 1 |
8j-2602 Valve Gp-Selector
| 8J***02 | Valve Group-Selector | 1 |
| 8J***44 | Stem | 1 |
| 8J***45 | Body-Valve Selector | 1 |
131-4784 Valve Gp-Selector
| 13***84 | Valve Group-Selector | 1 |
| 7M***85 | Seal,Adapter,Motor Part Of Kit P/N 5r***29 | 2 |
| 8J***30 | Plug | 2 |
6y-7187 Valve Gp-Selector & Press Cont
| 1J***53 | Pin-Spring | 2 |
| 1P***16 | Seal-O-Ring; (11.63mm Id) | 4 |
| 2A***46 | Plug 9.80mm(.386in.)Outside Dia. | 1 |
153-7909 Valve Gp-Selector & Press Cont -Transmission
| 03***94 | Screw-Button Head; (5/16-18-Thd) | 5 |
| 11***72 | Plunger | 1 |
| 11***74 | Stop | 1 |
6t-9290 Valve Gp-Solenoid
| 16***91 | Valve Kit; (Tc Lockup Clutch) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 6T***90 | Valve Group-Solenoid; (Lockup Clutch & Syncronizing) | 1 |
105-3025 Valve Gp-Solenoid
| 01***27 | Nut-Stamped | 1 |
| 10***65 | Spacer | 1 |
| 10***67 | Kit-Seal | 1 |
214-4040 Valve Gp-Solenoid -Tc Lockup Clutch
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***91 | Valve Kit; (Tc Lockup Clutch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
9x-9820 Valve Gp-Solenoid
| 01***27 | Nut-Stamped | 1 |
| 10***65 | Spacer | 1 |
| 10***66 | Coil As | 1 |
9x-9830 Valve Gp-Solenoid
| 01***27 | Nut-Stamped | 1 |
| 10***65 | Spacer | 1 |
| 10***66 | Coil As | 1 |
6i-8563 Valve Gp-Torque Conv Priority
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 1P***99 | Stop | 1 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 2 |
6y-7185 Valve Gp-Transmission Control
| 5L***61 | Bolt (5.50" Long) | 26 |
| 5M***14 | Pipe Plug Cylinder Block Oil Pressure | 4 |
| 6T***28 | Plate-Divider | 1 |
153-7903 Valve Gp-Transmission Control
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 13***65 | Manifold-Top | 1 |
8r-4204 Wheel Gp-Final Drive & Brake
| 10***45 | Retainer | 4 |
| 11***77 | Gear-Sun; (24-Teeth) | 1 |
| 11***78 | Gear-Planetary; (23-Teeth) | 3 |
Service Equipment And Supplies
104-4449 Film Gp
| 10***49 | Film Group | 1 |
| 10***50 | Film-Stripe; (994) | 1 |
| 10***51 | Film-Stripe; (994) | 1 |
122-6125 Film Gp -Rh
| 10***52 | Film As | 0 |
| 10***57 | Film; (192 cm) | 0 |
| 12***25 | Film Group; -Rh | 1 |
5p-8502 Padlock Gp
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 1 |
| 5P***02 | Padlock Group; (Includes: Battery Compartments, Platform Compartments, Radiator Access Door, Firewall Doors) | 1 |
| 8Y***64 | Sleeve (Not Part Of This Group) | 1 |
152-7140 Plate & Film Gp
| 15***94 | Film-Warning; (Crankcase-Indonesian) | 2 |
| 15***22 | Film-Identification; (Auto Ether) | 1 |
| 15***23 | Plate-Warning; (No Clearance For Mach Turn) | 2 |
9x-6206 Plate & Film Gp
| 10***44 | Film; (Torque Converter) | 1 |
| 10***60 | Film-Instruction; (Prelubrication Pump) | 1 |
| 10***61 | Film-Instruction; (Prelubrication Pump) | 1 |
7x-0721 Plate & Film Gp
| 10***64 | Film-Identification | 1 |
| 10***61 | Film-Identification | 1 |
| 10***63 | Film-Identification | 1 |
9x-6201 Plate & Film Gp
| 10***00 | Plate-Notice | 1 |
| 11***26 | Plate-Identification | 1 |
| 11***27 | Plate-Identification | 1 |
9x-6205 Plate & Film Gp
| 10***45 | Film; (Torque Converter) | 1 |
| 10***91 | Plate-Notice; (Shaft Spline) | 1 |
| 11***51 | Film-Identification; (Wheel Loader)(Pms) | 1 |
152-7142 Plate & Film Gp
| 15***94 | Film-Warning; (Crankcase-Indonesian) | 2 |
| 15***22 | Film-Identification; (Auto Ether) | 1 |
| 15***23 | Plate-Warning; (No Clearance For Mach Turn) | 2 |
Steering System
6e-1026 Actuator Gp-Piston Pump
| 14***21 | Rod; (184.7mm Lg) | 1 |
| 14***22 | Rod; (184.9mm Lg) | 1 |
| 14***23 | Rod; (184.6mm Lg) | 1 |
6e-1025 Actuator Gp-Piston Pump
| 6E***25 | Actuator Group-Piston Pump; -Swing | 1 |
| 6E***67 | Rod-Actuator | 1 |
| 6E***68 | Piston-Actuator | 1 |
8x-0070 Cylinder & Mtg Gp-Steering
| 4F***64 | Washer-Hard; (26.2x60.3x5-mm Thk) | 2 |
| 4V***18 | Spacer; (27.5x50x17-mm Thk) | 2 |
| 6E***29 | Cylinder Group-Steering; -Lh | 1 |
6e-0529 Cylinder Gp-Steering -Lh
| 12***14 | Head | 1 |
| 13***63 | Kit-Hydraulic Cylinder Seal; (Cylinder-1) | 1 |
| 13***71 | Kit-Seal; (Cylinder-2) | 1 |
9t-9019 Cylinder Gp-Steering -Rh
| 12***14 | Head | 1 |
| 15***29 | Ring-Backup | 1 |
| 16***18 | Seal As-Buffer | 1 |
138-4344 Filter & Lines Gp-Case Drain -Steering
| 13***44 | Filter & Lines Group-Case Drain; -Steering | 1 |
| 14***98 | Hose As | 1 |
| 14***99 | Hose As | 1 |
8x-0072 Filter & Mtg Gp-Steer & Impl
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 8 |
| 6E***74 | Filter Group-Oil; -Cooler Screen | 2 |
| 8T***56 | Bolt-Plt; (M12 X 1.75 X 35) | 8 |
6e-0874 Filter Gp-Oil -Cooler Screen
| 11***43 | Cover-Filter | 1 |
| 13***76 | Filter Element As-Oil; (Ultra High Efficiency)(Ultra High Efficiency) | 2 |
| 1H***00 | Pin--To Compression Release Shaft | 1 |
6e-1023 Head Gp-Pump
| 08***72 | Plug-O-Ring | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 5H***09 | Seal-O-Ring | 1 |
8x-0078 Lines Gp-Secondary Steering
| 1P***03 | Seal - Rectangular (31.86mm Id) | 2 |
| 1P***82 | Flange-Half | 2 |
| 1P***84 | Flange-Half | 2 |
152-8959 Lines Gp-Steer & Axle Cooler
| 13***95 | Block | 1 |
| 13***96 | Block | 1 |
| 13***95 | Hose As | 1 |
159-9330 Lines Gp-Steering
| 10***34 | Plate-Orifice | 1 |
| 15***30 | Lines Group-Steering | 1 |
| 16***78 | Tube As | 1 |
138-4342 Lines Gp-Steering
| 13***42 | Lines Group-Steering | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 16***20 | Hose As | 1 |
8x-0077 Lines Gp-Steering
| 10***66 | Clip; (50.8mm Id) | 1 |
| 11***78 | Fitting-Orifice | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 12 |
8x-1726 Lines Gp-Steering Neutralizer
| 1S***15 | Conduit Clip (Use As Required) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 5 |
| 4D***71 | Clip 25.4 cm(10 In.) Long | 2 |
8x-1727 Lines Gp-Steering Neutralizer
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 3 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
| 6V***97 | Seal (Later Machines And Field Installed) | 9 |
152-8956 Lines Gp-Steering Neutralizer
| 14***17 | Valve Group-Check; -Steering Quad | 1 |
| 15***56 | Lines Group-Steering Neutralizer | 1 |
| 15***37 | Tube As | 1 |
152-8957 Lines Gp-Steering Neutralizer
| 15***57 | Lines Group-Steering Neutralizer; -Rear | 1 |
| 15***50 | Hose As | 1 |
| 15***51 | Hose As | 1 |
8x-8504 Lines Gp-Steering Oil Cooler
| 10***20 | Bracket | 1 |
| 10***17 | Tube As | 1 |
| 13***67 | Shield | 1 |
8x-0081 Pump & Mtg Gp-Secondary Steer
| 5F***06 | Packing,Preformed Pump Mtg Part Of Kit P/N 5r***25 | 1 |
| 6E***68 | Pump Group-Gear; -Secondary Steering | 1 |
| 8T***22 | Washer-Hard-To Lock Carrier Rollers | 2 |
8x-0080 Pump & Mtg Gp-Ster & Brake Clr
| 11***41 | Pump Group-Gear; -Brake Cooling | 1 |
| 6E***40 | Coupling | 1 |
| 6E***16 | Flange | 1 |
8x-0082 Pump & Mtg Gp-Ster & Brake Clr
| 5F***06 | Packing,Preformed Pump Mtg Part Of Kit P/N 5r***25 | 1 |
| 6E***67 | Pump Group-Gear; -Steering, Brake Oil Cooler | 1 |
| 7X***53 | Bolt-Plt; (M16 X 2.0 X 40) | 2 |
6e-0867 Pump Gp-Gear -Steering, Brake Oil Cooler
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
| 11***75 | Kit-Seal; (Gear Pump) | 0 |
6e-0868 Pump Gp-Gear -Secondary Steering
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 1A***35 | Bolt 2.00 In. (5.08 cm) Long | 8 |
| 1U***37 | Washer; (1.5mm Thk) | 1 |
119-8763 Pump Gp-Metering -Hmu
| 11***68 | Bolt; (5/16-24x2-In) | 7 |
| 11***80 | Cap | 1 |
| 11***90 | Spacer; (23.8x55.9x4-mm Thk) | 1 |
6e-2726 Pump Gp-Metering
| 11***41 | Kit-Seal; (Includes 1 Seal-Dust, 1 Seal-Quad Ring & 6 Seal-O-Rings) | 1 |
| 11***19 | Kit-Conversion; (Includes Bolts,Cap,Spacer) | 1 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 1 |
9t-8993 Pump Gp-Piston
| 09***58 | Ring-Retaining | 2 |
| 12***81 | Cap | 2 |
| 13***38 | Rotating Group-Pump; -Steering | 1 |
6e-1022 Rotating Gp-Pump -Steering
| 09***48 | Ring-Retaining | 1 |
| 5H***52 | Seal 5.73 In. (14.55 cm)Inside Dia. | 1 |
| 6E***22 | Rotating Group-Pump; -Steering | 1 |
9t-4219 Rotating Gp-Pump -Brake
| 8J***73 | Ring-Retaining | 1 |
| 9T***19 | Rotating Group-Pump; -Brake | 1 |
| 9T***36 | Washer-Spherical | 1 |
134-2238 Rotating Gp-Pump -Steering
| 09***48 | Ring-Retaining | 1 |
| 10***40 | Bearing As | 1 |
| 10***43 | Swashplate | 1 |
8x-3526 Steering Column Gp-Adjustable
| 17***64 | Switch Group-Rotary; (Turn Signal, Hazard) | 1 |
| 1D***21 | Nut Reset Minumum Pump Angle | 4 |
| 1H***37 | Bolt-Mount 9w***75 Fuel Level Sensor | 1 |
8x-0085 Valve & Mtg Gp-Secondary Steer
| 14***69 | Valve Group-Steering | 1 |
| 5B***16 | Spacer | 4 |
| 6V***39 | Bolt-Hex Head; (M12x1.75x60mm) | 3 |
8x-1709 Valve & Mtg Gp-Secondary Steer
| 1B***86 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 1P***08 | Seal-Rectangular; (57.4mm Id) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 8 |
8x-1708 Valve & Mtg Gp-Steering Neut
| 1P***11 | Sleeve-Bracket To Hydraulic Core As | 1 |
| 2H***22 | Lug (Weld) | 1 |
| 5H***22 | Bushing | 1 |
154-8015 Valve & Mtg Gp-Steering Neut
| 15***15 | Valve & Mtg Group-Steering Neut | 1 |
| 15***83 | Plate As | 1 |
| 21***79 | Sleeve | 1 |
9j-8225 Valve Gp-Relief
| 1J***97 | Valve; (Push-Pull) | 1 |
| 6J***28 | Seat-Pilot | 1 |
| 9J***25 | Valve Group; -Brake Cooling | 1 |
176-9370 Valve Gp-Check -Steering
| 16***54 | Seal-O-Ring | 1 |
| 17***70 | Valve Group-Check; -Steering | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
9t-3096 Valve Gp-Check
| 9T***96 | Valve Group-Check; -Dead Engine, Lift Arm Lower | 1 |
149-4617 Valve Gp-Check -Steering Quad
| 14***17 | Valve Group-Check; -Steering Quad | 1 |
| 17***69 | Valve Group-Check; -Steering | 2 |
| 17***70 | Valve Group-Check; -Steering | 2 |
176-9369 Valve Gp-Check -Steering
| 16***54 | Seal-O-Ring | 1 |
| 17***69 | Valve Group-Check; -Steering | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
140-1816 Valve Gp-Damper
| 12***91 | Body | 1 |
| 12***93 | Spacer | 1 |
| 12***94 | Piston, Mounting | 1 |
9t-9006 Valve Gp-Diverter
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 1P***05 | Seal (Check Valve Outlet) | 2 |
| 1U***22 | Bearing-Sleeve; (12.65mm Id) | 1 |
163-5465 Valve Gp-Diverter -Secondary Steering
| 16***26 | Cover | 1 |
| 16***65 | Valve Group-Diverter; -Secondary Steering | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
8j-1553 Valve Gp-Steering Neutralizer
| 1A***96 | Spring-Valve | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
| 1U***42 | Boot | 1 |
249-5615 Valve Gp-Pilot -Stic Steering
| 10***19 | Shim; (0.762-mm Thk) | 2 |
| 10***55 | Handle | 1 |
| 10***56 | Bracket | 1 |
147-1237 Valve Gp-Pilot Cartridge
| 10***07 | Spring | 1 |
| 10***10 | Plunger | 1 |
| 14***37 | Valve Group-Pilot Cartridge; -Steering | 1 |
147-1238 Valve Gp-Pilot Cartridge
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 10***18 | Shim; (.020in Thk) | 1 |
| 10***19 | Shim; (0.762-mm Thk) | 1 |
4t-9948 Valve Gp-Relief
| 06***39 | Seal-O-Ring | 1 |
| 4T***90 | Screw | 1 |
| 4T***91 | Nut | 1 |
6e-1024 Valve Gp-Pump Control -Pressure, Flow Compensator-Steering
| 12***94 | Plug; (Break Off) | 5 |
| 3E***25 | Bolt-Socket Head; (M8x1.25x50-mm) | 5 |
| 5P***74 | Seal-O-Ring; (Small) | 3 |
6e-3850 Valve Gp-Pump Control -Flow Compensator-Steering
| 16***83 | Spring | 1 |
| 6E***07 | Locknut-Sealing | 1 |
| 6E***50 | Valve Group-Pump Control; -Flow Compensator-Steering | 1 |
6e-3857 Valve Gp-Pump Control -Pressure Compensator-Steering
| 11***24 | Setscrew | 1 |
| 17***22 | Spring | 1 |
| 20***67 | Piston | 1 |
4t-1573 Valve Gp-Relief
| 06***39 | Seal-O-Ring | 1 |
| 1B***30 | Nut 7.938 mm(.312 In.) Thick | 1 |
| 4T***73 | Valve Group-Relief; Relief Valve Group-Fluid Control Inc | 1 |
9j-0460 Valve Gp-Relief -Secondary Steering
| 4T***73 | Valve Group-Relief; Relief Valve Group-Fluid Control Inc | 1 |
| 4T***96 | Seal Kit (Service Repair For 9j460) | 1 |
| 4T***48 | Valve Group-Pitch Relief; -Secondary Steering | 1 |
1u-2226 Valve Gp-Selector & Press Cont
| 1U***26 | Valve Group-Selector & Press Cont; -Pilot Lines | 1 |
| 1U***28 | Valve Group | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
4t-1860 Valve Gp-Shuttle
| 14***03 | Seal-O-Ring | 1 |
| 14***04 | Ring-Backup | 2 |
| 14***05 | Ring-Backup | 2 |
154-5236 Valve Gp-Steering
| 10***79 | Spring | 1 |
| 10***81 | Cover | 1 |
| 13***56 | Cover | 1 |
9t-9008 Valve Gp-Steering
| 4J***33 | Seal Fuel Injection Pump | 2 |
| 6V***36 | Bolt; (M12x1.75x70-mm) | 1 |
| 8B***15 | Shim; .025cm(.010in)Thk Ea | 3 |
9t-9007 Valve Gp-Steering
| 1P***05 | Seal (Check Valve Outlet) | 2 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
140-9369 Valve Gp-Steering
| 14***16 | Valve Group-Damper | 1 |
| 14***69 | Valve Group-Steering | 1 |
| 1P***05 | Seal (Check Valve Outlet) | 2 |
9t-7426 Valve Gp-Steering Neutralizer
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 5F***35 | Spring | 1 |
| 6J***68 | Boot | 1 |
Work Tools
131-9356 Adapter Gp-Tip
| 11***83 | Wedge | 9 |
| 13***56 | Adapter Group-Tip | 1 |
| 13***75 | Clamp As | 9 |
130-1124 Adapter-Tip
| 11***83 | Wedge | 8 |
| 13***24 | Adapter-Tip | 1 |
| 13***75 | Clamp As | 8 |
136-8787 Adapter-Tip
| 13***87 | Adapter-Tip | 1 |
138-0050 Base-Wear Plate
| 13***50 | Base-Wear Plate | 1 |
138-0052 Base-Wear Plate
| 13***52 | Base-Wear Plate | 1 |
102-9333 Bucket As-Coal
| 10***16 | Adapter-Strap | 8 |
| 10***71 | Plate | 2 |
| 10***77 | Corner; (Rh) | 1 |
101-6756 Bucket As-Coal
| 10***16 | Adapter-Strap | 9 |
| 10***56 | Bucket As-Coal | 1 |
| 10***58 | Bar | 2 |
102-9300 Bucket As-Coal
| 10***56 | Edge As-Cutting | 1 |
| 10***65 | Edge-Cutting | 1 |
| 10***68 | Plate | 1 |
207-2883 Bucket As-Coal
| 10***16 | Adapter-Strap | 9 |
| 11***72 | Hinge As; (Tilt) | 2 |
| 12***64 | Corner; (Rh) | 1 |
156-5963 Bucket As-Coal
| 10***16 | Adapter-Strap | 9 |
| 11***72 | Hinge As; (Tilt) | 2 |
| 12***64 | Corner; (Rh) | 1 |
102-2593 Bucket As-General Purpose
| 10***56 | Edge As-Cutting | 1 |
| 10***65 | Edge-Cutting | 1 |
| 10***73 | Corner; (Rh) | 1 |
102-9319 Bucket As-General Purpose
| 10***57 | Edge As-Cutting | 1 |
| 10***68 | Edge-Cutting | 1 |
| 10***73 | Corner; (Rh) | 1 |
102-9326 Bucket As-General Purpose
| 10***57 | Edge As-Cutting | 1 |
| 10***68 | Edge-Cutting | 1 |
| 10***73 | Corner; (Rh) | 1 |
113-4108 Bucket As-General Purpose
| 10***73 | Corner; (Rh) | 1 |
| 10***74 | Corner; (Lh) | 1 |
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
102-9302 Bucket As-General Purpose
| 10***56 | Edge As-Cutting | 1 |
| 10***65 | Edge-Cutting | 1 |
| 10***73 | Corner; (Rh) | 1 |
113-4107 Bucket As-General Purpose
| 10***73 | Corner; (Rh) | 1 |
| 10***74 | Corner; (Lh) | 1 |
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
113-4106 Bucket As-Iron
| 10***73 | Corner; (Rh) | 1 |
| 10***74 | Corner; (Lh) | 1 |
| 10***73 | Bar | 2 |
102-2505 Bucket As-Iron
| 10***08 | Adapter | 9 |
| 10***65 | Edge As-Cutting | 1 |
| 10***66 | Edge-Cutting | 1 |
113-4105 Bucket As-Iron
| 10***73 | Corner; (Rh) | 1 |
| 10***74 | Corner; (Lh) | 1 |
| 10***73 | Bar | 2 |
101-6751 Bucket As-Iron
| 10***03 | Hinge As; (Inner) | 2 |
| 10***04 | Hinge As; (Center) | 1 |
| 10***05 | Hinge As; (Center) | 1 |
102-2570 Bucket As-Iron
| 10***56 | Edge As-Cutting | 1 |
| 10***65 | Edge-Cutting | 1 |
| 10***73 | Corner; (Rh) | 1 |
8x-8607 Bucket As-Iron
| 4T***04 | Adapter-Tip; -Two Strap | 3 |
| 4T***05 | Adapter-Tip; (Two Strap-Rh) | 3 |
| 4T***06 | Adapter-Tip; (Two Strap-Lh) | 3 |
102-2592 Bucket As-Iron
| 10***08 | Adapter | 9 |
| 10***65 | Edge As-Cutting | 1 |
| 10***66 | Edge-Cutting | 1 |
102-2606 Bucket As-Iron
| 10***57 | Edge As-Cutting | 1 |
| 10***68 | Edge-Cutting | 1 |
| 10***73 | Corner; (Rh) | 1 |
7i-5899 Bucket As-Iron
| 10***03 | Hinge As; (Inner) | 2 |
| 10***04 | Hinge As; (Center) | 1 |
| 10***05 | Hinge As; (Center) | 1 |
102-2598 Bucket As-Iron
| 10***57 | Edge As-Cutting | 1 |
| 10***68 | Edge-Cutting | 1 |
| 10***73 | Corner; (Rh) | 1 |
117-7693 Bucket As-Rock
| 10***75 | Hinge As; (Outer) | 1 |
| 10***76 | Hinge As; (Center) | 1 |
| 10***77 | Hinge As; (Center) | 1 |
102-0675 Bucket As-Rock
| 10***08 | Adapter | 8 |
| 10***63 | Edge As-Cutting | 1 |
| 10***64 | Edge-Cutting | 1 |
102-0664 Bucket As-Rock
| 10***57 | Edge As-Cutting | 1 |
| 10***68 | Edge-Cutting | 1 |
| 10***73 | Corner; (Rh) | 1 |
102-0640 Bucket As-Rock
| 10***08 | Adapter | 9 |
| 10***65 | Edge As-Cutting | 1 |
| 10***66 | Edge-Cutting | 1 |
168-0490 Bucket As-Rock
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
| 10***12 | Hinge As; (Lift-Lh-Outer) | 1 |
| 11***58 | Plate | 1 |
121-8890 Bucket As-Rock
| 11***72 | Hinge As; (Tilt) | 2 |
| 12***59 | Edge As | 1 |
| 12***90 | Bucket As-Rock | 1 |
121-2360 Bucket As-Rock
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
| 10***12 | Hinge As; (Lift-Lh-Outer) | 1 |
| 12***04 | Edge As-Cutting | 1 |
207-2873 Bucket As-Rock
| 11***72 | Hinge As; (Tilt) | 2 |
| 12***04 | Edge As-Cutting | 1 |
| 12***40 | Hinge As; (Lift-Rh-Inner) | 1 |
113-4104 Bucket As-Rock
| 10***73 | Corner; (Rh) | 1 |
| 10***74 | Corner; (Lh) | 1 |
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
102-2124 Bucket As-Rock
| 10***57 | Edge As-Cutting | 1 |
| 10***68 | Edge-Cutting | 1 |
| 10***73 | Corner; (Rh) | 1 |
111-7974 Bucket As-Rock
| 10***73 | Corner; (Rh) | 1 |
| 10***74 | Corner; (Lh) | 1 |
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
117-7694 Bucket As-Rock
| 10***75 | Hinge As; (Outer) | 1 |
| 10***76 | Hinge As; (Center) | 1 |
| 10***77 | Hinge As; (Center) | 1 |
102-0672 Bucket As-Rock
| 10***08 | Adapter | 8 |
| 10***63 | Edge As-Cutting | 1 |
| 10***64 | Edge-Cutting | 1 |
113-4103 Bucket As-Rock
| 10***73 | Corner; (Rh) | 1 |
| 10***74 | Corner; (Lh) | 1 |
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
102-0633 Bucket As-Rock
| 10***56 | Edge As-Cutting | 1 |
| 10***65 | Edge-Cutting | 1 |
| 10***73 | Corner; (Rh) | 1 |
8x-1497 Bucket As-Rock
| 4T***04 | Adapter-Tip; -Two Strap | 3 |
| 4T***05 | Adapter-Tip; (Two Strap-Rh) | 3 |
| 4T***06 | Adapter-Tip; (Two Strap-Lh) | 3 |
117-7696 Bucket As-Rock
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
| 10***10 | Hinge As; (Rh)(Center) | 1 |
| 10***11 | Hinge As; (Lh)(Center) | 1 |
8x-1491 Bucket As-Rock
| 4T***04 | Adapter-Tip; -Two Strap | 3 |
| 4T***05 | Adapter-Tip; (Two Strap-Rh) | 3 |
| 4T***06 | Adapter-Tip; (Two Strap-Lh) | 3 |
102-0676 Bucket As-Rock
| 10***57 | Edge As-Cutting | 1 |
| 10***68 | Edge-Cutting | 1 |
| 10***73 | Corner; (Rh) | 1 |
101-9704 Bucket As-Rock
| 10***56 | Edge As-Cutting | 1 |
| 10***73 | Corner; (Rh) | 1 |
| 10***74 | Corner; (Lh) | 1 |
121-2361 Bucket As-Rock
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
| 10***12 | Hinge As; (Lift-Lh-Outer) | 1 |
| 12***04 | Edge As-Cutting | 1 |
207-2881 Bucket As-Rock
| 11***72 | Hinge As; (Tilt) | 2 |
| 12***59 | Edge As | 1 |
| 12***40 | Hinge As; (Lift-Rh-Inner) | 1 |
169-0923 Bucket As-Rock
| 11***80 | Lug-Mounting | 8 |
| 11***72 | Hinge As; (Tilt) | 2 |
| 12***40 | Hinge As; (Lift-Rh-Inner) | 1 |
207-2879 Bucket As-Rock
| 11***72 | Hinge As; (Tilt) | 2 |
| 12***78 | Plate | 2 |
| 12***59 | Edge As | 1 |
102-0673 Bucket As-Rock
| 10***57 | Edge As-Cutting | 1 |
| 10***68 | Edge-Cutting | 1 |
| 10***73 | Corner; (Rh) | 1 |
117-7697 Bucket As-Rock
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
| 10***12 | Hinge As; (Lift-Lh-Outer) | 1 |
| 10***47 | Plate | 12 |
144-2846 Bucket As-Rock
| 10***73 | Corner; (Rh) | 1 |
| 10***74 | Corner; (Lh) | 1 |
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
102-2605 Bucket As-Rock
| 10***08 | Adapter | 8 |
| 10***63 | Edge As-Cutting | 1 |
| 10***64 | Edge-Cutting | 1 |
121-8889 Bucket As-Rock
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
| 10***12 | Hinge As; (Lift-Lh-Outer) | 1 |
| 12***64 | Corner; (Rh) | 1 |
126-4931 Bucket As-Rock
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
| 10***12 | Hinge As; (Lift-Lh-Outer) | 1 |
| 11***58 | Plate | 1 |
8x-6673 Bucket As-Rock
| 2A***52 | Hinge As; (Outer) | 1 |
| 2A***53 | Hinge As; (Center) | 1 |
| 2A***54 | Hinge As; (Inner) | 2 |
144-2844 Bucket As-Rock
| 11***72 | Hinge As; (Tilt) | 2 |
| 12***04 | Edge As-Cutting | 1 |
| 12***40 | Hinge As; (Lift-Rh-Inner) | 1 |
102-0649 Bucket As-Rock
| 10***56 | Edge As-Cutting | 1 |
| 10***65 | Edge-Cutting | 1 |
| 10***73 | Corner; (Rh) | 1 |
102-0648 Bucket As-Rock
| 10***08 | Adapter | 9 |
| 10***65 | Edge As-Cutting | 1 |
| 10***66 | Edge-Cutting | 1 |
139-1178 Bucket As-Rock
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
| 10***12 | Hinge As; (Lift-Lh-Outer) | 1 |
| 11***58 | Plate | 2 |
126-4934 Bucket As-Rock
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
| 10***12 | Hinge As; (Lift-Lh-Outer) | 1 |
| 11***58 | Plate | 1 |
144-2845 Bucket As-Rock
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
| 10***12 | Hinge As; (Lift-Lh-Outer) | 1 |
| 10***29 | Plate | 1 |
2a-6690 Bucket As-Rock
| 2A***52 | Hinge As; (Outer) | 1 |
| 2A***53 | Hinge As; (Center) | 1 |
| 2A***54 | Hinge As; (Inner) | 2 |
111-7973 Bucket As-Rock
| 10***73 | Corner; (Rh) | 1 |
| 10***74 | Corner; (Lh) | 1 |
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
207-2875 Bucket As-Rock
| 11***72 | Hinge As; (Tilt) | 2 |
| 12***04 | Edge As-Cutting | 1 |
| 12***71 | Plate | 1 |
207-2877 Bucket As-Rock
| 11***72 | Hinge As; (Tilt) | 2 |
| 12***04 | Edge As-Cutting | 1 |
| 12***40 | Hinge As; (Lift-Rh-Inner) | 1 |
144-2847 Bucket As-Rock
| 10***73 | Corner; (Rh) | 1 |
| 10***74 | Corner; (Lh) | 1 |
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
102-2123 Bucket As-Rock
| 10***08 | Adapter | 8 |
| 10***63 | Edge As-Cutting | 1 |
| 10***64 | Edge-Cutting | 1 |
102-0663 Bucket As-Rock
| 10***08 | Adapter | 8 |
| 10***63 | Edge As-Cutting | 1 |
| 10***64 | Edge-Cutting | 1 |
102-2597 Bucket As-Rock
| 10***08 | Adapter | 8 |
| 10***63 | Edge As-Cutting | 1 |
| 10***64 | Edge-Cutting | 1 |
117-7695 Bucket As-Rock
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
| 10***10 | Hinge As; (Rh)(Center) | 1 |
| 10***11 | Hinge As; (Lh)(Center) | 1 |
117-7698 Bucket As-Rock
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
| 10***10 | Hinge As; (Rh)(Center) | 1 |
| 10***11 | Hinge As; (Lh)(Center) | 1 |
207-2885 Bucket As-Rock
| 10***73 | Corner; (Rh) | 1 |
| 10***74 | Corner; (Lh) | 1 |
| 10***22 | Plate | 1 |
102-0639 Bucket As-Rock
| 10***08 | Adapter | 9 |
| 10***65 | Edge As-Cutting | 1 |
| 10***66 | Edge-Cutting | 1 |
8x-0807 Bucket As-Rock
| 4T***04 | Adapter-Tip; -Two Strap | 3 |
| 4T***05 | Adapter-Tip; (Two Strap-Rh) | 3 |
| 4T***06 | Adapter-Tip; (Two Strap-Lh) | 3 |
168-9236 Bucket As-Rock
| 11***72 | Hinge As; (Tilt) | 2 |
| 12***71 | Plate | 1 |
| 12***40 | Hinge As; (Lift-Rh-Inner) | 1 |
102-0641 Bucket As-Rock
| 10***56 | Edge As-Cutting | 1 |
| 10***65 | Edge-Cutting | 1 |
| 10***73 | Corner; (Rh) | 1 |
102-0632 Bucket As-Rock
| 10***08 | Adapter | 9 |
| 10***65 | Edge As-Cutting | 1 |
| 10***66 | Edge-Cutting | 1 |
126-4932 Bucket As-Rock
| 10***09 | Hinge As; (Lift-Rh-Outer) | 1 |
| 10***12 | Hinge As; (Lift-Lh-Outer) | 1 |
| 11***58 | Plate | 1 |
2a-6770 Bucket As-Rock
| 2A***66 | Corner; (Rh) | 1 |
| 2A***68 | Corner; (Lh) | 1 |
| 2A***24 | Plate | 4 |
8x-0156 Bucket Gp-Coal
| 10***56 | Bucket As-Coal | 1 |
| 10***30 | Edge-Segment; (Center) | 8 |
| 12***00 | Protector-Side Bar | 2 |
207-2882 Bucket Gp-Coal
| 10***30 | Edge-Segment; (Center) | 8 |
| 12***00 | Protector-Side Bar | 2 |
| 20***82 | Bucket Group-Coal | 1 |
102-9299 Bucket Gp-Coal
| 10***99 | Bucket Group-Coal | 1 |
| 10***00 | Bucket As-Coal | 1 |
| 10***52 | Edge Group-Segment | 1 |
102-9318 Bucket Gp-General Purpose
| 10***86 | Edge Group-Cutting; -Segments & Wear Plate | 1 |
| 10***18 | Bucket Group-General Purpose | 1 |
| 10***19 | Bucket As-General Purpose | 1 |
8x-0151 Bucket Gp-General Purpose
| 10***83 | Edge-Segment; (556mm Wide) | 3 |
| 10***31 | Edge-Segment | 3 |
| 10***32 | Edge-Segment | 3 |
101-0486 Bucket Gp-General Purpose
| 10***86 | Bucket Group-General Purpose | 1 |
| 10***83 | Edge-Segment; (556mm Wide) | 3 |
| 10***31 | Edge-Segment | 3 |
101-9095 Bucket Gp-General Purpose
| 10***95 | Bucket Group-General Purpose | 1 |
| 10***93 | Bucket As-General Purpose | 1 |
| 10***34 | Edge-Segment | 1 |
102-9325 Bucket Gp-General Purpose
| 10***86 | Edge Group-Cutting; -Segments & Wear Plate | 1 |
| 10***25 | Bucket Group-General Purpose | 1 |
| 10***26 | Bucket As-General Purpose | 1 |
102-9332 Bucket Gp-General Purpose
| 10***32 | Bucket Group-General Purpose | 1 |
| 10***33 | Bucket As-Coal | 1 |
| 10***30 | Edge-Segment; (Center) | 7 |
102-9301 Bucket Gp-General Purpose
| 10***01 | Bucket Group-General Purpose | 1 |
| 10***02 | Bucket As-General Purpose | 1 |
| 10***52 | Edge Group-Segment | 1 |
125-7787 Bucket Gp-Rock
| 12***87 | Bucket Group-Rock | 1 |
| 12***32 | Bucket As-Rock | 1 |
| 13***24 | Adapter-Tip | 1 |
8x-0154 Bucket Gp-Rock
| 2A***70 | Bucket As-Rock | 1 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 8 |
| 4K***84 | Washer-Hard; (34x55x6-mm Thk) | 8 |
8x-0153 Bucket Gp-Rock
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 8 |
| 4K***84 | Washer-Hard; (34x55x6-mm Thk) | 8 |
| 4T***07 | Retainer-G.E.T. | 4 |
207-7377 Bucket Gp-Rock
| 14***86 | Edge Group-Cutting | 1 |
| 20***75 | Bucket As-Rock | 1 |
| 20***77 | Bucket Group-Rock | 1 |
101-9096 Bucket Gp-Rock
| 10***96 | Bucket Group-Rock | 1 |
| 10***33 | Bucket As-Rock | 1 |
| 10***52 | Edge Group-Segment | 1 |
101-9100 Bucket Gp-Rock
| 10***00 | Bucket Group-Rock | 1 |
| 10***05 | Bucket As-Iron | 1 |
| 10***60 | Edge Group-Cutting | 1 |
8x-0152 Bucket Gp-Rock
| 11***03 | Bucket As-Rock | 1 |
| 12***50 | Edge Group-Segment | 1 |
| 12***00 | Protector-Side Bar | 2 |
159-8976 Bucket Gp-Rock
| 11***88 | Pin-Flexible | 14 |
| 11***85 | Protector-Edge | 3 |
| 11***86 | Protector-Edge | 3 |
101-9097 Bucket Gp-Rock
| 10***97 | Bucket Group-Rock | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
| 12***89 | Bucket As-Rock | 1 |
101-9102 Bucket Gp-Rock
| 10***15 | Plate-Wear | 2 |
| 10***02 | Bucket Group-Rock | 1 |
| 10***32 | Bucket As-Rock | 1 |
125-7786 Bucket Gp-Rock
| 12***86 | Bucket Group-Rock | 1 |
| 12***31 | Bucket As-Rock | 1 |
| 13***24 | Adapter-Tip | 1 |
101-9105 Bucket Gp-Rock
| 10***15 | Plate-Wear | 2 |
| 10***05 | Bucket Group-Rock | 1 |
| 10***48 | Bucket As-Rock | 1 |
101-9093 Bucket Gp-Rock
| 10***15 | Plate-Wear | 2 |
| 10***93 | Bucket Group-Rock | 1 |
| 10***23 | Bucket As-Rock | 1 |
139-1177 Bucket Gp-Rock
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
| 13***56 | Adapter Group-Tip | 1 |
| 13***77 | Bucket Group-Rock | 1 |
101-9104 Bucket Gp-Rock
| 10***15 | Plate-Wear | 2 |
| 10***04 | Bucket Group-Rock | 1 |
| 10***40 | Bucket As-Rock | 1 |
101-9098 Bucket Gp-Rock
| 10***98 | Bucket Group-Rock | 1 |
| 10***41 | Bucket As-Rock | 1 |
| 10***52 | Edge Group-Segment | 1 |
101-9088 Bucket Gp-Rock
| 10***88 | Bucket Group-Rock | 1 |
| 10***97 | Bucket As-Rock | 1 |
| 10***59 | Edge Group-Cutting | 1 |
8x-0155 Bucket Gp-Rock
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 8 |
| 4K***84 | Washer-Hard; (34x55x6-mm Thk) | 8 |
| 4T***07 | Retainer-G.E.T. | 4 |
101-9092 Bucket Gp-Rock
| 10***15 | Plate-Wear | 2 |
| 10***92 | Bucket Group-Rock | 1 |
| 10***75 | Bucket As-Rock | 1 |
159-8975 Bucket Gp-Rock
| 11***88 | Pin-Flexible | 14 |
| 11***85 | Protector-Edge | 3 |
| 11***86 | Protector-Edge | 3 |
101-9089 Bucket Gp-Rock
| 10***89 | Bucket Group-Rock | 1 |
| 10***05 | Bucket As-Rock | 1 |
| 10***59 | Edge Group-Cutting | 1 |
101-9091 Bucket Gp-Rock
| 10***15 | Plate-Wear | 2 |
| 10***91 | Bucket Group-Rock | 1 |
| 10***72 | Bucket As-Rock | 1 |
207-2884 Bucket Gp-Rock
| 14***86 | Edge Group-Cutting | 1 |
| 20***84 | Bucket Group-Rock | 1 |
| 20***85 | Bucket As-Rock | 1 |
125-7823 Bucket Gp-Rock
| 12***23 | Bucket Group-Rock | 1 |
| 12***34 | Bucket As-Rock | 1 |
| 13***56 | Adapter Group-Tip | 1 |
159-8978 Bucket Gp-Rock
| 11***88 | Pin-Flexible | 16 |
| 11***84 | Protector-Edge | 2 |
| 11***85 | Protector-Edge | 3 |
101-9101 Bucket Gp-Rock
| 10***01 | Bucket Group-Rock | 1 |
| 10***92 | Bucket As-Iron | 1 |
| 10***60 | Edge Group-Cutting | 1 |
207-2876 Bucket Gp-Rock
| 14***86 | Edge Group-Cutting | 1 |
| 20***76 | Bucket Group-Rock | 1 |
| 20***77 | Bucket As-Rock | 1 |
101-9099 Bucket Gp-Rock
| 10***99 | Bucket Group-Rock | 1 |
| 10***49 | Bucket As-Rock | 1 |
| 10***52 | Edge Group-Segment | 1 |
101-9090 Bucket Gp-Rock
| 10***15 | Plate-Wear | 2 |
| 10***90 | Bucket Group-Rock | 1 |
| 10***63 | Bucket As-Rock | 1 |
101-9103 Bucket Gp-Rock
| 10***15 | Plate-Wear | 2 |
| 10***03 | Bucket Group-Rock | 1 |
| 10***39 | Bucket As-Rock | 1 |
207-2880 Bucket Gp-Rock
| 14***85 | Edge Group-Cutting | 1 |
| 20***80 | Bucket Group-Rock | 1 |
| 20***81 | Bucket As-Rock | 1 |
207-2878 Bucket Gp-Rock
| 10***83 | Protector Group-Sidebar | 1 |
| 14***85 | Edge Group-Cutting | 1 |
| 20***78 | Bucket Group-Rock | 1 |
207-2872 Bucket Gp-Rock
| 14***86 | Edge Group-Cutting | 1 |
| 20***72 | Bucket Group-Rock | 1 |
| 20***73 | Bucket As-Rock | 1 |
101-9094 Bucket Gp-Rock
| 10***94 | Bucket Group-Rock | 1 |
| 10***70 | Bucket As-Iron | 1 |
| 10***34 | Edge-Segment | 1 |
195-7198 Clamp Gp-Adapter
| 16***52 | Clamp | 1 |
| 16***53 | Wedge | 1 |
| 19***95 | Wedge | 1 |
132-1095 Corner
| 13***93 | Corner; (Rh) | 1 |
| 13***95 | Corner | 1 |
129-9673 Edge As-Base
| 11***80 | Lug-Mounting | 7 |
| 12***73 | Edge As-Base | 1 |
110-2340 Edge As-Cutting
| 11***39 | Edge-Cutting | 1 |
| 11***40 | Edge As-Cutting | 1 |
| 6I***04 | Adapter | 8 |
117-7692 Edge As-Cutting
| 10***08 | Adapter | 8 |
| 11***92 | Edge As-Cutting | 1 |
100-5587 Edge Gp-Cutting -Segments & Wear Plate
| 10***87 | Edge Group-Cutting; -Segments & Wear Plate | 1 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 40 |
| 4K***84 | Washer-Hard; (34x55x6-mm Thk) | 8 |
107-5560 Edge Gp-Cutting
| 10***09 | Cover-Adapter | 9 |
| 10***74 | Retainer-G.E.T. | 9 |
| 10***01 | Pin-G.E.T. | 9 |
208-8833 Edge Gp-Cutting
| 10***83 | Edge-Segment; (556mm Wide) | 5 |
| 20***33 | Edge Group-Cutting | 1 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 15 |
208-8832 Edge Gp-Cutting
| 10***83 | Edge-Segment; (556mm Wide) | 2 |
| 20***32 | Edge Group-Cutting | 1 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 12 |
208-8822 Edge Gp-Cutting
| 10***33 | Edge-Segment; (440mm Wide) | 5 |
| 20***22 | Edge Group-Cutting | 1 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 15 |
121-2103 Edge Gp-Cutting
| 10***34 | Edge-Segment | 3 |
| 10***35 | Edge-Segment | 3 |
| 10***83 | Edge-Segment; (556mm Wide) | 6 |
208-8831 Edge Gp-Cutting
| 10***33 | Edge-Segment; (440mm Wide) | 2 |
| 10***83 | Edge-Segment; (556mm Wide) | 3 |
| 20***31 | Edge Group-Cutting | 1 |
208-8820 Edge Gp-Cutting
| 10***33 | Edge-Segment; (440mm Wide) | 2 |
| 10***34 | Edge-Segment | 1 |
| 10***35 | Edge-Segment | 1 |
208-8821 Edge Gp-Cutting
| 10***33 | Edge-Segment; (440mm Wide) | 3 |
| 20***21 | Edge Group-Cutting | 1 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 9 |
121-2107 Edge Gp-Cutting
| 10***33 | Edge-Segment; (440mm Wide) | 4 |
| 10***34 | Edge-Segment | 3 |
| 10***35 | Edge-Segment | 3 |
144-1286 Edge Gp-Cutting
| 10***15 | Plate-Wear | 2 |
| 10***83 | Edge-Segment; (556mm Wide) | 5 |
| 10***33 | Edge-Segment; (Center) | 1 |
208-8829 Edge Gp-Cutting
| 10***34 | Edge-Segment | 1 |
| 10***35 | Edge-Segment | 1 |
| 10***83 | Edge-Segment; (556mm Wide) | 2 |
107-5559 Edge Gp-Cutting
| 10***09 | Cover-Adapter | 8 |
| 10***74 | Retainer-G.E.T. | 8 |
| 10***01 | Pin-G.E.T. | 8 |
133-0692 Edge Gp-Cutting
| 10***15 | Plate-Wear | 2 |
| 10***83 | Edge-Segment; (556mm Wide) | 5 |
| 10***30 | Edge-Segment; (Center) | 2 |
100-5586 Edge Gp-Cutting -Segments & Wear Plate
| 10***12 | Edge-Segment; (Center) | 0 |
| 10***13 | Edge-Segment | 0 |
| 10***14 | Edge-Segment | 0 |
121-6658 Edge Gp-Cutting
| 10***33 | Edge-Segment; (440mm Wide) | 2 |
| 10***34 | Edge-Segment | 3 |
| 10***35 | Edge-Segment | 3 |
144-1285 Edge Gp-Cutting
| 10***15 | Plate-Wear | 2 |
| 10***83 | Edge-Segment; (556mm Wide) | 5 |
| 10***30 | Edge-Segment; (Center) | 2 |
208-8830 Edge Gp-Cutting
| 10***83 | Edge-Segment; (556mm Wide) | 3 |
| 20***30 | Edge Group-Cutting | 1 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 9 |
121-2106 Edge Gp-Cutting
| 10***34 | Edge-Segment | 3 |
| 10***35 | Edge-Segment | 3 |
| 10***83 | Edge-Segment; (556mm Wide) | 6 |
119-3260 Edge Gp-Segment
| 10***15 | Plate-Wear | 2 |
| 10***34 | Edge-Segment | 3 |
| 10***35 | Edge-Segment | 3 |
122-5050 Edge Gp-Segment
| 10***15 | Plate-Wear | 2 |
| 10***83 | Edge-Segment; (556mm Wide) | 3 |
| 10***31 | Edge-Segment | 3 |
107-3413 Edge Gp-Segment
| 10***15 | Plate-Wear | 2 |
| 10***34 | Edge-Segment | 3 |
| 10***35 | Edge-Segment | 3 |
122-5051 Edge Gp-Segment
| 10***15 | Plate-Wear | 2 |
| 10***83 | Edge-Segment; (556mm Wide) | 5 |
| 10***30 | Edge-Segment; (Center) | 2 |
133-0693 Edge Gp-Segment
| 10***15 | Plate-Wear | 2 |
| 10***83 | Edge-Segment; (556mm Wide) | 5 |
| 10***33 | Edge-Segment; (Center) | 1 |
104-3552 Edge Gp-Segment
| 10***15 | Plate-Wear | 2 |
| 10***33 | Edge-Segment; (440mm Wide) | 4 |
| 10***34 | Edge-Segment | 4 |
122-5052 Edge Gp-Segment
| 10***15 | Plate-Wear | 2 |
| 10***83 | Edge-Segment; (556mm Wide) | 5 |
| 10***33 | Edge-Segment; (Center) | 1 |
119-9360 Edge Gp-Segment -& Wear Plate
| 10***15 | Plate-Wear | 2 |
| 10***33 | Edge-Segment; (440mm Wide) | 2 |
| 10***34 | Edge-Segment | 3 |
122-5049 Edge Gp-Segment
| 10***15 | Plate-Wear | 2 |
| 10***34 | Edge-Segment | 1 |
| 10***35 | Edge-Segment | 1 |
9n-4264 Edge Gp-Segment
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 40 |
| 5P***23 | Bolt-Plow-Corner Adapters To Bucket | 40 |
| 9N***50 | Edge-Segment | 2 |
8e-5789 Edge Gp-Segment
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 40 |
| 5P***23 | Bolt-Plow-Corner Adapters To Bucket | 40 |
| 8E***57 | Edge-Segment | 2 |
122-2519 Edge-Cutting
| 12***19 | Edge-Cutting | 1 |
286-2074 Edge-Segment -Rh
| 28***74 | Edge-Segment; -Rh | 1 |
286-2075 Edge-Segment -Lh
| 28***75 | Edge-Segment; -Lh | 1 |
286-2073 Edge-Segment
| 28***73 | Edge-Segment | 1 |
310-1635 Plate-Wear -A.R.M., Rh
| 31***35 | Plate-Wear; -A.R.M., Rh | 1 |
310-1634 Plate-Wear -A.R.M., Center
| 31***34 | Plate-Wear; -A.R.M., Center | 1 |
144-1283 Protector Gp-Edge
| 10***33 | Edge-Segment; (440mm Wide) | 2 |
| 10***83 | Edge-Segment; (556mm Wide) | 3 |
| 11***88 | Pin-Flexible | 14 |
195-7143 Protector Gp-Edge
| 19***43 | Protector Group-Edge | 1 |
| 19***30 | Plate-Wear; (Center) | 2 |
| 19***31 | Plate-Wear; (Rh) | 3 |
144-1284 Protector Gp-Side Bar
| 10***33 | Edge-Segment; (440mm Wide) | 2 |
| 10***83 | Edge-Segment; (556mm Wide) | 3 |
| 11***88 | Pin-Flexible | 16 |
101-3083 Protector Gp-Side Bar
| 10***83 | Protector Group-Sidebar | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 4 |
| 13***38 | Pin-G.E.T. | 4 |
140-6784 Protector-Edge
| 14***84 | Protector-Edge | 1 |
140-6786 Protector-Edge -Lh
| 14***86 | Protector-Edge; -Lh | 1 |
229-6998 Protector-Edge
| 19***31 | Plate-Wear; (Rh) | 3 |
| 19***32 | Plate-Wear; (Lh) | 3 |
| 20***11 | Bolt-Plow; (1-1/4x7x5.52-Thd) | 21 |
140-6785 Protector-Edge -Rh
| 14***85 | Protector-Edge; -Rh | 1 |
138-0007 Retainer-G.E.T.
| 13***07 | Retainer-G.E.T. | 1 |
6y-6355 Tip Gp-Abrasion -J-700
| 11***08 | Pin-G.E.T. | 1 |
| 11***09 | Retainer As-G.E.T. | 1 |
| 4T***03 | Tip-Abrasion | 1 |
101-7273 Tip Gp-Abrasion
| 10***73 | Tip Group-Abrasion | 1 |
| 13***08 | Pin-G.E.T. | 1 |
| 13***09 | Retainer As-G.E.T. | 1 |
204-7042 Tip Gp-Abrasion
| 10***89 | Tip Group-Abrasion; -J-700, Heavy-Duty | 1 |
| 20***42 | Tip Group-Abrasion | 1 |
100-5589 Tip Gp-Abrasion -J-700, Heavy-Duty
| 10***89 | Tip Group-Abrasion; -J-700, Heavy-Duty | 1 |
| 11***08 | Pin-G.E.T. | 1 |
| 11***09 | Retainer As-G.E.T. | 1 |
113-4790 Tip Gp-General Purpose
| 10***82 | Tip-General Purpose | 1 |
| 11***90 | Tip Group-General Purpose | 1 |
| 13***88 | Pin-Flexible | 1 |
132-1066 Tip Gp-General Purpose
| 13***66 | Tip Group-General Purpose | 1 |
| 13***82 | Tip-General Purpose | 1 |
| 13***83 | Pin As | 1 |
136-6799 Tip Gp-General Purpose
| 13***82 | Tip-General Purpose | 1 |
| 13***83 | Pin As | 1 |
| 13***99 | Tip Group-General Purpose | 1 |
204-7041 Tip Gp-Long
| 10***88 | Tip Group-Long; -J-700, Heavy-Duty | 1 |
| 20***41 | Tip Group-Long | 1 |
6y-6354 Tip Gp-Long -J-700
| 11***08 | Pin-G.E.T. | 1 |
| 11***09 | Retainer As-G.E.T. | 1 |
| 4T***02 | Tip-Long | 1 |
101-7269 Tip Gp-Long
| 10***69 | Tip Group-Long; -J-800, Heavy-Duty | 1 |
| 13***08 | Pin-G.E.T. | 1 |
| 13***09 | Retainer As-G.E.T. | 1 |
100-5588 Tip Gp-Long -J-700, Heavy-Duty
| 10***88 | Tip Group-Long; -J-700, Heavy-Duty | 1 |
| 11***08 | Pin-G.E.T. | 1 |
| 11***09 | Retainer As-G.E.T. | 1 |
6y-6356 Tip Gp-Penetration -J-700
| 11***08 | Pin-G.E.T. | 1 |
| 11***09 | Retainer As-G.E.T. | 1 |
| 4T***09 | Tip-Penetration | 1 |
135-9738 Tip Gp-Penetration
| 13***38 | Tip Group-Penetration | 1 |
| 13***83 | Pin As | 1 |
| 21***80 | Tip-Penetration | 1 |
113-9690 Tip Gp-Penetration
| 11***90 | Tip Group-Penetration; -J-800 | 1 |
| 11***09 | Tip-Penetration | 1 |
| 13***08 | Pin-G.E.T. | 1 |
135-9800 Tip-Penetration
| 13***00 | Tip-Penetration | 1 |
117-6809 Tip-Penetration
| 11***09 | Tip-Penetration | 1 |
135-9700 Tip-Penetration
| 13***00 | Tip-Penetration | 1 |
8x-0740 Wing Gp-Bucket
| 2A***36 | Plate As; (Rh) | 1 |
| 2A***37 | Plate As; (Lh) | 1 |
| 8X***40 | Wing Group-Bucket | 1 |
7i-5500 Wing Gp-Bucket
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 16 |
| 4F***42 | Bolt 7.62 cm(3 In.) Long | 16 |
| 4T***93 | Edge-Cutting | 4 |
994 serial number reference
On a 994 the PIN plate is riveted to the main frame, typically near the articulation joint or the cab access steps; the engine and other major components carry their own separate plates, so confirm you are reading the machine (chassis) plate and not an engine tag. Read it as three letters/numbers (the prefix, tying the unit to its model and build series) followed by a five-digit sequence number unique to that machine. Pre-2001 machines show only this 8-character serial; 2001-and-later Cat products show it embedded in the last 8 characters of a longer 17-character PIN.
| Prefix | Identifies | Notes |
|---|---|---|
| 9YF | Base 994 wheel loader (pre-994D), single generation | Only documented prefix for the original 994 (no letter suffix), serial numbers 9YF00001-up. Fitted with the Cat 3516 diesel engine (naturally aspirated, distinct from the 994D's later 3516B TA). Production ran about 1990-1998, ending at roughly 200 units before the line was replaced by the 994D. Built at Caterpillar's Mining Vehicle Center in Decatur, Illinois. Verify exact configuration against the data plate for units near the top of the range. |
Frequently asked questions
What engine does the Caterpillar 994 wheel loader use?
The original base 994 (1990-1998, serial prefix 9YF) runs a Cat 3516, sixteen cylinder turbocharged diesel. Later generations carry updated 3516-family engines under the same family name: the 994D uses a 3516B EUI/TA rated around 1,027 kW (1,375 hp), the 994F and 994H use a 3516B HD EUI rated around 1,176 kW (1,577 hp gross), and the current 994K uses a 3516E rated around 1,377 kW (1,847 hp gross). Confirm the exact variant against the serial prefix before ordering engine parts.
What is the operating weight of the Caterpillar 994?
The base 994 comes in near 177,100 kg (390,500 lb, about 177 t). Weight climbs across later generations: roughly 189,000-193,000 kg (417,000-425,000 lb) for the 994D, about 194,000 kg (427,000 lb) for the 994F, about 195,000 kg (431,000 lb) for the 994H, and about 242,600 kg (535,000 lb, roughly 240 t) for the 994K. Exact figures vary by bucket and lift configuration.
What replaced the Caterpillar 994?
The base 994 was succeeded in 1998 by the 994D, then followed by the 994F, the 994H, and the current 994K. This is a continuous generational succession rather than an unrelated reissue of the model number, with each step carrying a heavier frame, an updated 3516-family engine, and (from the F series on) added onboard monitoring.
What 994 owners discuss
What's the reputation of the Cat 994's powertrain and fuel burn among operators?
Consensus is that the drivetrain is durable but feels different depending on generation, and this is mostly discussed for the later machines rather than the original base 994. The base 994, 994D, and 994F run a conventional torque-converter drive, so operators feel the converter multiply torque and generate heat under repeated loaded cycles. The 994H and 994K add an integral impeller-clutch torque converter with a rimpull control system, giving a firmer feel and letting the operator manage wheel slip on loose or wet pit floors through the left pedal, plus a lock-up clutch on the K for direct drive at speed. On fuel burn, real-world numbers reported for the 994K run roughly 227-265 L/hr (about 60-70 US gal/hr), with the 994H running something like 19-30 L/hr (around 5 gal/hr) leaner. Community pushback is consistent against inflated figures some sellers quote in the 570 L/hr (150 gal/hr) range - operators note the engine doesn't burn anywhere near that even on a dyno; actual consumption swings with bucket size, material, and duty cycle.
Does the engine actually change across 994 generations, and does it matter for service work?
Yes, and mechanics flag this as the biggest gotcha with this model line since every generation is marketed under variations of the same '3516' family name. The original base 994 (1990-1998) runs a mechanically-governed 3516; documented power figures for that exact early configuration are thin online, so don't assume it matches later ratings. The 994D moved to a 3516B TA/EUI rated near 1,025 kW (1,375 hp). The 994F and 994H both use a 3516B HD EUI, with net ratings reported anywhere from about 1,091 kW to 1,177 kW (1,463-1,577 hp) depending on source and rating standard - treat that spread as normal, not an error. The 994K jumped to the 3516E, commonly listed at 1,297 kW (1,739 hp) net. Because the family name doesn't change, confirm the exact engine arrangement off the machine's serial prefix before pulling a spec sheet or ordering parts. Broader 3516/3516B community discussion (mostly from marine and power-generation use, but the same engine family) also flags recurring upper intake-valve recession that can push valve lash checks to roughly every 1,000 hours on higher-hour units versus the standard interval, plus occasional EUI injector hard-start complaints - budget for it as a maintenance item on a high-hour machine rather than assuming it's a defect.
What wear patterns show up most in day-to-day service on a 994?
Tires are the constant topic for this weight class. The 994 runs 53.5/85-57 tires, each weighing on the order of 6 tonnes (about 13,800 lb) with a diameter close to 4 m (13 ft), and pricing in this size class commonly runs into the tens of thousands of dollars per tire - so tread depth, sidewall cuts, and heat checking get as much attention during inspections as any structural wear point. Wear life varies enormously with operating discipline: inflation pressure, load balance, ground conditions, and whether the operator uses the rimpull/traction control to avoid spinning tires loading into a bank. Early base-994 units are noted in period accounts as running tires that were only just adequate for the machine's weight until larger tire options caught up. Beyond tires, articulation-joint (center hitch) pins and bushings and king-pin bores take constant loaded flexing and commonly show play before the tires or bucket look worn, so busy sites check them on their own schedule. On ground engaging tools, standard advice is to check tips and adapters for uneven wear patterns, which usually signals a loading or approach-angle habit worth correcting rather than waiting for a tooth to be lost in the pile.
Are there common electrical or sensor issues reported on the 994?
The 994 line has carried Caterpillar's Vital Information Management System (VIMS) since at least the mid-1990s, so this applies across generations including the original base 994, not just the later F/H/K-series machines. VIMS and related payload-monitoring sensors are generally reliable, but the recurring complaint pattern on large Cat mining machines of this age is harness-connector corrosion and sensor drift after years of dust, vibration, and wash-down exposure - showing up as intermittent trend-data gaps or a payload reading that no longer matches actual bucket loads, rather than one dramatic failure. Beyond the monitoring system, most everyday electrical complaints trace back to ordinary causes: a weak battery, a failing alternator, or a marginal starter causing dim lights, slow cranking, or an intermittent no-start, not anything unique to the platform.
What do people say about the 994's brake system, and is there a safety concern to watch?
The 994 family uses oil-cooled multiple-disc service brakes with dedicated cooling circuits and nitrogen-charged accumulators holding system pressure, standard practice for a loader this size doing repeated loaded stops on grade. Discussion centers less on the discs themselves and more on the cooling-oil circuit: keeping cooling screens and coolers clean and watching for contaminated or degraded cooling oil, since that's the most commonly cited root cause when brake cooling temperatures run high. A slipping or overheating brake tends to show up as a gradual pedal-feel or temperature-gauge change rather than sudden failure. This is a safety-critical system given the machine's operating weight - have your dealer verify accumulator pre-charge and brake cooling circuit condition before returning a 994 to service after any suspected brake issue or extended idle period.
What should you check when buying a used Cat 994?
First confirm which generation you're actually looking at - base 994, 994D, 994F, 994H, or 994K - off the engine model and serial prefix, since specs, engine architecture (mechanical 3516 vs EUI 3516B/3516E), control layout (steering wheel vs joystick), and available monitoring data all differ and shouldn't be assumed from the model number alone. Used listings for this size of machine often break out hours by component - frame hours versus steering pump, brake-cooling pump, and implement pump hours separately - so treat mismatched component hours as a flag that something was swapped or rebuilt and ask why. Physically check articulation-joint and king-pin play under load, inspect lift-arm and frame rails for cracking or repair welds given the loads involved, check tire tread and sidewalls given replacement cost, and pull VIMS fault and trend history if the system is present and functional - it tells you more about how the machine was actually run than a walkaround alone. Have your dealer verify hydraulic and brake system condition with a full-load inspection before you commit, especially on a machine with unclear service history or extended idle time.
What do owners and enthusiasts say about the sheer size of the 994 compared to other loaders?
This comes up often in community discussion, more anecdotal than technical. People note the logistics alone are a story - moving one has been described as needing multiple separate loads just for the machine plus the tires, with the lug nuts alone filling a pallet box. Very early base-994 configurations have been noted in community photos and discussion as lacking a ROPS structure on some units, with commentary that a machine this size tipping over would leave nothing to protect the operator - that's a design-era observation about specific early units, not something to assume applies to any given used base 994 without checking the actual machine and its history. Drivetrain layout also gets mentioned: multiple driveline paths off the transmission, one running to the axles through a drop-down box and another running forward to power auxiliary hydraulics, are part of why operators say this machine feels and handles differently from a standard wheel loader. Any question about ROPS presence or structural configuration on a specific unit should be confirmed with your dealer against the data plate rather than assumed from era alone.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 994 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.