Caterpillarwheel-type loaderwheel loader
Caterpillar 988G
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 988G is a large wheel-type loader in Cat's rubber-tired loader line, sitting in the class between the 980 and 990 machines and built mainly for quarry, aggregate, and mining face-loading work. It runs Caterpillar's 3456 EUI engine, a turbocharged, air-to-air aftercooled inline-six diesel with electronic unit injection, rated around 354 kW (475 hp) net at 1900 rpm and up to about 388 kW (520 hp) gross depending on rating. Operating weight runs roughly 50 tonnes (110,400 to 110,635 lb), varying with bucket, tires, and counterweight. Cat built the 988G from around 1999/2000 through about 2005, following the 988F Series II and giving way to the 988H. It came with a powershift-planetary transmission and torque converter, lockup clutch optional, standard or high-lift boom arrangements, and a range of general-purpose, rock, spade-nose, quarry, and high-abrasion buckets plus a factory block-handling coupler for quarry block work.
Against the older 988B, the G generation's biggest change was the front end: a fabricated box-section boom with a single main-boom-to-bucket joint replaced the 988B's two-joint linkage, giving a stiffer, more direct feel, along with more horsepower, more weight, a bigger bucket, and more breakout force. The STIC lever combined steering with gear and direction selection into one hand control, and the machine picked up electronic engine and transmission control plus lift and tilt kickout position sensors in place of older, simpler hydraulics. The later 988H and 988K moved to different engines and electronics, so 988G-specific components, like its EUI fuel system and powershift valve body, generally don't interchange with those newer machines. Cat built enough 988G units for quarry and mining fleets worldwide that used machines, remanufactured components, and rebuild expertise remain widely available today, keeping it a common parts and overhaul candidate even though the model itself is long out of production.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 988G specifications
Engine
| Engine model | Cat 3456 EUI (turbocharged, air-to-air aftercooled, electronic unit injection) |
| Configuration | Inline-6 diesel |
| Gross power | 388 kW (520 hp) |
| Net power (ISO 9249) | 354 kW (475 hp) at 1900 rpm |
| Displacement | 15.8-15.9 L (964 cu in) |
| Bore x stroke | 140 mm x 172 mm (5.6 in x 6.8 in) |
| Emissions certification | Not consistently documented for this 2000-2004 production run across available sources; verify against the specific serial/engine arrangement number with your dealer |
Weights
| Operating weight | approx. 50,090-50,183 kg (110,400-110,635 lb); varies slightly by source/configuration |
| Shipping weight | Not published in available spec sheets |
| Ground pressure | Not published for this wheeled machine class |
Dimensions
| Overall length (standard, bucket on ground) | 12.24 m (40 ft 2 in) |
| Overall operating length | 12.5-12.66 m (41 ft 1 in - 41 ft 7 in), varies by bucket/configuration |
| Operating width | 3.53 m (11 ft 7 in) |
| Height to top of cab | 4.12-4.15 m (13 ft 6 in - 13 ft 7 in) |
| Hinge pin height, max lift | 5.86 m (19 ft 3 in) |
| Reach at max lift and dump | 1.89 m (6 ft 2 in) |
| Wheelbase | 4.55-4.57 m (14 ft 11 in - 15 ft) |
| Ground clearance | 0.55-0.58 m (1 ft 10 in - 1 ft 11 in) |
| Tire size (as commonly equipped) | 35/65R33 |
Performance
| Maximum forward travel speed | 57 km/h (35.4 mph) |
| Maximum reverse travel speed | 37.8-38.7 km/h (23.5-24 mph) |
| Breakout force | reported 515-548 kN (116,000-123,300 lb) depending on source; varies by configuration/measurement method |
| Static tipping load, full turn | 27,391 kg (60,386 lb) |
| Bucket capacity (heaped) | 6.3-8.2 m3 (8.25-10.7 yd3) depending on bucket selection |
| Minimum turning radius (outside, over tires) | 8.7-8.83 m (28.5-29 ft) |
| Gradeability | Not published for this model |
Service capacities (summary)
| Fuel tank | 679 L (179.4 gal) |
| Hydraulic system (including tank) | 470 L (124.2 gal) |
| Engine oil (crankcase) | 60 L (15.9 gal) |
| Cooling system | 103 L (27.3 gal) |
| Transmission | 70 L (18.5 gal) |
| Front axle/differential | 186 L (49.2 gal) |
| Rear axle/differential | 186 L (49.2 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
988G fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (oil and filter change) | 60 L (15.9 US gal) | Cat DEO (Diesel Engine Oil). SAE 15W-40 for temperate to warm climates; SAE 10W-30 where ambient runs below about -15°C (5°F). Meets Cat ECF-2 / API CI-4 diesel engine oil performance. Engine is the Cat 3456 EUI (electronic unit injection) diesel. |
| Cooling system | 103 L (27.3 US gal) | Cat ELC (Extended Life Coolant), factory premix giving freeze protection to roughly -37°C (-34°F). Cat DEAC accepted as an alternate coolant but not to be mixed with ELC in the same system. |
| Fuel tank | 679 L (179.4 US gal) | Low-sulfur No. 2-D diesel fuel meeting Cat's diesel fuel specification for the engine; biodiesel blends only up to the limit stated in the fuel recommendations guide for this engine family. |
| Transmission (torque converter and powershift gearbox) | 70 L (18.5 US gal) | Cat TDTO (Transmission/Drive Train Oil, meets Cat TO-4). Grade by ambient temperature: SAE 10W in cold climates, SAE 30 for moderate ranges, SAE 50 in hot climates. Cat TDTO-TMS multi-season synthetic blend is an accepted single-grade alternative across a wider temperature band. |
| Front axle - differential and final drives | 186 L (49.2 US gal) | Cat TDTO (TO-4 spec), same viscosity-by-temperature grade selection as the transmission. |
| Rear axle - differential and final drives | 186 L (49.2 US gal) | Cat TDTO (TO-4 spec), same viscosity-by-temperature grade selection as the transmission. |
| Hydraulic system, including tank (implement, steering, brake circuits) | 470 L (124.2 US gal) | Cat TDTO (TO-4 spec) - this generation of large wheel loader runs the implement, steering, and brake hydraulics on the same drive-train oil family as the transmission and axles rather than a dedicated hydraulic-only fluid. Grade selection follows the same ambient-temperature chart as the transmission. |
| Hydraulic tank only | 267 L (70.6 US gal) | Cat TDTO (TO-4 spec), same product and grade as the full hydraulic system above. |
| Grease (all articulation, pin, and linkage points) | Per lubrication schedule - no reservoir capacity | Cat Multipurpose Grease, NLGI 2, lithium-complex base, for routine chassis and linkage lubrication. Cat Extreme Application grease (moly-fortified) as an alternate for heavily loaded lift-arm and bucket-linkage pins. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 988G maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 988G beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S sampling on the 988G's 3456 EUI engine oil, transmission/torque-converter oil, and both axle housings at every scheduled interval; rising iron or copper in an axle sample flags early final-drive wear before it costs a differential. Track oil pressure and coolant temperature sensor readings and injector cutout/balance results through the diagnostic tool, since this EUI engine flags a weakening injector before it costs power. Sample hydraulic oil for water and dirt around the lift/tilt cylinder seals, and periodically verify kickout sensor calibration rather than waiting for a boom-positioning complaint.
Corrective & Common Repairs
Common 988G fixes center on the powershift transmission's neutralizer plunger dropping to neutral mid-shift, often a weak spring, pedal-area dirt, or valve-spool debris, and on the hoist/tilt flow-sharing valve interrupting hoist when curl is commanded under load. Loader-arm and articulation center-pin bushings wear fastest on poorly greased machines, showing up as steering play or linkage clunk under load. Lift/tilt cylinder rod seals and hydraulic hose fittings are frequent leak points. Corroded connectors and chafed harnesses near the articulation joint cause more reported sensor faults than actual sensor failures.
Overhaul & Rebuild Points
High-hour 988G rebuilds typically start with the 3456 EUI engine: injectors, turbocharger, and cylinder liners wear first under sustained quarry cycles, and hour meters alone don't reliably predict remaining engine life. Transmission clutch packs and planetary gearsets, then front and rear axle differentials and final drives, are the next wear points given load-and-carry loads. Wet-disc axle brake packs, the main hydraulic pump, and lift/tilt cylinder seals are common reseal or rebuild candidates. Inspect the box-section boom, articulation pins/bushings, and frame pivot welds for cracking at major overhaul.
Seasonal & Environment Servicing
In cold climates, fit a block heater and use a lower-viscosity Cat DEO grade for the 3456 EUI before winter; expect a somewhat longer cold-crank time as normal EUI behavior, and verify Cat ELC freeze protection each season. In hot, dusty quarry or mine settings, shorten air-filter and radiator/hydraulic-cooler cleaning intervals, and grease loader-linkage and articulation pins more often since abrasive dust speeds bushing wear. Match tire compound to the working surface; tires are the single biggest wear cost on a used 988G, so check tread and casing condition often.
988G common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 129-0372 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 129-0375 | Bowl As-Water Collection | Fuel system service | Check fitment → |
| 133-5673 | Element | Fuel system service | Check fitment → |
| 5D-5957 | Seal-O-Ring | Fuel system service | Check fitment → |
| 114-5988 | Film | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
988G fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-03 | Engine oil pressure sensor circuit reads voltage above the normal range | Open circuit, chafed sensor wiring, or a failed oil pressure sensor | Inspect the sensor connector and harness for damage or corrosion, then check sensor supply and signal with the diagnostic tool before replacing the sensor |
| 100-01 | Engine oil pressure reads below normal for the current engine speed | Low oil level, worn oil pump, plugged filter, or a faulty oil pressure sensor | Shut down if pressure is critically low, check oil level and filter condition, and confirm actual pressure with a mechanical gauge before trusting the sensor reading |
| 110-00 | Engine coolant temperature reads above the normal operating range | Low coolant, a plugged radiator or hydraulic oil cooler core, a failed fan drive, or a stuck thermostat | Shut down if the reading is critical, check coolant level, inspect the cooling package for debris, and verify fan operation before restarting |
| 111-01 | Coolant level sensor reads below the low-level threshold | Actual coolant loss from an external leak, or a fouled or failed coolant level sensor | Check the coolant level and inspect hoses, radiator, and water pump for leaks before clearing the code and refilling |
| 102-03 | Boost (intake manifold) pressure sensor circuit reads voltage above normal | Damaged sensor harness, a corroded connector, or a failed boost pressure sensor | Inspect the harness and connector, check sensor supply voltage and signal with the diagnostic tool, and replace the sensor only if it fails the test |
| 190-08 | Engine speed/timing sensor signal is abnormal or erratic | Incorrect sensor air gap, a damaged sensor, or a wiring fault to the crank or timing sensor | Check the sensor air gap and wiring, clean and reseat the connector, and retest before condemning the sensor |
| 168-02 | Electrical system (battery) voltage signal is erratic or intermittent | Loose or corroded battery connections, a weak charging circuit, or chafed main harness wiring | Check battery terminals and ground straps, test charging output, and inspect the main harness for chafe points |
| 1-05 | No. 1 cylinder injector solenoid current reads below normal | Injector wiring fault, a degrading injector solenoid, or a bad connector on the valve cover harness | Check injector harness continuity and connector condition, run an injector cutout/balance test with the diagnostic tool, then replace the injector only if it fails |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
988G attachments & work tools
General purpose buckets
Straight-edge general purpose bucket is the core work tool for this class, sized around 6.3-6.4 m3 heaped (8.25-8.30 yd3) and 8.2-8.3 m3 struck (10.73-10.80 yd3), with width near 3800 mm (12.5 ft). Cutting edge is bolt-on, offered plain, with bolt-on adapters, or with bolt-on adapters plus wear segments.
Rock buckets
Straight-edge rock bucket uses shouldered double-strap adapters and accepts side-bar protectors with bolt-on segments and tips for added wear resistance. Spade-nose rock bucket trades some capacity for extra penetration and dump clearance in face or bank loading; both variants run higher breakout force than the general purpose profile.
Quarry-duty and high-abrasion buckets
A heavy-duty quarry bucket suits face loading where moderate abrasion meets high impact, and a high-abrasion bucket suits the opposite mix of high wear with moderate impact. Both are severe-application variants of the standard bucket rather than a separate size class.
Breakout force and dump geometry
With the standard bucket this loader delivers roughly 515-520 kN (about 116,000-123,000 lbf) breakout force and dump clearance at maximum raise near 4.2 m (13.8 ft); actual figures shift with the bucket variant fitted and counterweight.
Mounting and coupler system
Work tools in this size class mount pin-on. The quick-attach coupler line used on the smaller wheel loaders in the same family does not extend up to this bucket size, so tool changes are done at the pins rather than through a hydraulic quick coupler.
Block handling coupler
A dedicated block-handling coupler is factory-offered for this loader and its next generation, built to hold breakout force and lift performance for quarry block work. The interface is about 2000 mm wide by 1030 mm tall (78.7 x 40.6 in) and weighs roughly 1636 kg (3608 lb) bare, pairing the machine with block forks/clamps for dimension-stone and quarry block handling.
Grapple work tools
Top-clamp grapple buckets are part of Cat's loader bucket range for holding loose or bulky material such as scrap or debris. Exact sizing for this model is not published alongside the standard bucket line, so fitment should be confirmed with a dealer against the machine's lift/tilt hydraulics.
Ride control
Factory-optional ride control adds an accumulator to the lift circuit to cushion boom motion over rough haul roads, helping retain loose or palletized loads while traveling loaded. A cab switch selects the system off or automatic.
Guarding and protection options
Extra guarding and heat shielding for critical machine functions is offered for severe-duty and quarry work. Scope varies by configuration and should be checked against the build sheet for a given unit.
All 988G assemblies by section
Every catalogued assembly group for the Caterpillar 988G. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
114-5136 Aftercooler Gp-Air
| 10***95 | Body As-Precleaner, . Sprocket | 1 |
| 11***36 | Aftercooler Group-Air | 1 |
| 17***45 | Air Cleaner Group; -Filter | 1 |
132-6248 Air Cleaner Gp
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 13***48 | Air Cleaner Group | 1 |
| 1N***03 | Clip Assem. | 1 |
174-2245 Air Cleaner Gp -Filter
| 06***25 | Hose-Radiator | 1 |
| 13***42 | Tube As | 1 |
| 17***45 | Air Cleaner Group; -Filter | 1 |
132-6237 Dust Ejector Gp
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 13***37 | Dust Ejector Group | 1 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 2 |
191-6147 Lines Gp-Air
| 10***54 | Manifold-Exhaust; (Center) | 1 |
| 10***08 | Manifold-Exhaust; (End)(End) | 2 |
| 10***92 | Stud-Taperlock; (3/8-16x3.93in) | 11 |
114-1904 Lines Gp-Air
| 11***04 | Lines Group-Air | 1 |
| 13***01 | Tube As | 1 |
| 16***57 | Bracket As | 1 |
132-6250 Lines Gp-Air
| 13***50 | Lines Group-Air | 1 |
| 13***03 | Support-Exhaust Pipe | 1 |
| 2N***65 | Bolt-High Temperature; (3/8-16x1.75-In) | 2 |
135-6552 Manifold Gp-Exhaust
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 2 |
| 10***20 | Spacer; (10.5x25x20-mm Thk) | 5 |
149-5239 Mounting Gp-Muffler
| 13***99 | Muffler As | 1 |
| 14***39 | Mounting Group-Muffler | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 8 |
132-6235 Muffler Gp
| 13***35 | Muffler Group | 1 |
| 14***80 | Clamp Assem. | 1 |
| 16***75 | Support As | 1 |
191-1041 Shield Gp-Heat
| 19***41 | Shield Group-Heat | 1 |
| 19***27 | Turbocharger Group | 1 |
| 1S***95 | Gasket-Turbocharger To Manifold; Gasket Turbocharger To Manifold | 1 |
192-2827 Turbocharger Gp
| 03***07 | Elbow-Hose | 1 |
| 10***09 | Cap As-Filler; (Fast Fill Fuel) | 1 |
| 18***91 | Vent As | 1 |
192-1995 Turbocharger Gp
| 11***87 | Bolt; (M6x0.04x10.4-mm)(6mm X 0.04 Thd) | 1 |
| 13***75 | Clamp As; (Service Repair) | 1 |
| 16***58 | Clip-Hose | 1 |
Basic Engine
133-9907 Adapter Gp-Pump Drive
| 13***06 | Adapter | 1 |
| 13***07 | Adapter Group-Pump Drive; -Remote | 1 |
| 1B***67 | Ball Bearing | 2 |
122-1248 Base Gp-Valve Cover & Inj Harn
| 10***18 | Clip | 3 |
| 10***19 | Clip | 3 |
| 10***34 | Kit-Receptacle; (12-Pin)(Valve Cover & Inj Harness) | 1 |
190-6563 Belt Tensioner Gp
| 19***60 | Belt-Serpentine | 1 |
| 19***63 | Belt Tensioner Group | 1 |
| 21***38 | Belt Tensioner; (Refrigerant Compressor) | 1 |
185-9699 Camshaft Gp
| 10***89 | Cover | 1 |
| 11***36 | Screw-Flat Head; (5/16-18x0.875-In) | 3 |
| 18***99 | Camshaft Group; (Single) | 1 |
140-9746 Cover Gp-Cylinder Block
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***35 | Seal-Integral | 1 |
| 14***46 | Cover Group-Cylinder Block; (Central Structure) | 1 |
107-6736 Cover Gp-Cylinder Block
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 10***36 | Cover Group-Cylinder Block; -Remote | 1 |
| 4N***99 | Gasket; (Oil Drain) | 1 |
165-0698 Cover Gp-Sound Suppression
| 00***30 | Stud; (5/16-18x225-In) | 2 |
| 10***99 | Cover As-Panel | 1 |
| 10***45 | Seal-Accessory Cover | 1 |
152-9082 Cover Gp-Valve Mechanism
| 15***35 | Cover Group-Valve Mechanism | 3 |
| 15***82 | Cover Group-Valve Mechanism | 1 |
150-3135 Cover Gp-Valve Mechanism
| 14***78 | Grommet | 1 |
| 15***57 | Cover-Valve Mech | 1 |
| 15***35 | Cover Group-Valve Mechanism | 1 |
137-7298 Crankshaft Gp
| 13***20 | Crankshaft As | 1 |
| 13***98 | Crankshaft Group | 1 |
| 1W***02 | Gear-Crankshaft; (80-Teeth) | 1 |
202-1255 Cylinder Block As
| 11***20 | Seal-O-Ring; (Mid-Liner) | 6 |
| 13***17 | Seal D-Ring | 6 |
| 13***81 | Liner-Cylinder Block | 6 |
139-9004 Cylinder Block As
| 11***20 | Seal-O-Ring; (Mid-Liner) | 6 |
| 13***17 | Seal D-Ring | 6 |
| 13***81 | Liner-Cylinder Block | 6 |
137-8471 Cylinder Block Gp
| 10***99 | Plug | 2 |
| 11***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 13***71 | Cylinder Block Group | 1 |
137-8468 Cylinder Block Gp
| 13***68 | Cylinder Block Group | 1 |
| 3P***23 | Bolt-Bearing Cap; (7/8-14x7.75-In) | 14 |
| 4N***57 | Cap-Crankshaft Bearing; (Crankshaft Bearing) | 7 |
137-8469 Cylinder Block Gp
| 10***99 | Plug | 2 |
| 11***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 13***69 | Cylinder Block Group | 1 |
202-1254 Cylinder Block Gp
| 16***81 | Cap-Crankshaft Bearing | 7 |
| 16***83 | Bolt; (7/8-14x7.5-In) | 14 |
| 20***54 | Cylinder Block Group | 1 |
243-0943 Cylinder Head As
| 15***82 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
| 16***42 | Insert-Valve Seat; (0.76-mm Os Od, Exhaust)(Standard) | 0 |
| 16***43 | Insert-Valve Seat; (0.76-mm Os Od, Inlet) | 0 |
243-6741 Cylinder Head As
| 12***47 | Guide-Valve; (0.51-mm Os)(Standard) | 0 |
| 12***75 | Guide-Valve; (Standard) | 24 |
| 12***12 | Guide-Valve; (0.13-mm Os)(Standard) | 0 |
245-4324 Cylinder Head As
| 12***47 | Guide-Valve; (0.51-mm Os)(Standard) | 0 |
| 12***75 | Guide-Valve; (Standard) | 24 |
| 12***12 | Guide-Valve; (0.13-mm Os)(Standard) | 0 |
223-7263 Cylinder Head As
| 12***47 | Guide-Valve; (0.51-mm Os)(Standard) | 0 |
| 12***75 | Guide-Valve; (Standard) | 24 |
| 12***12 | Guide-Valve; (0.13-mm Os)(Standard) | 0 |
183-5296 Cylinder Head Gp
| 15***24 | Valve; (Exhaust) | 12 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
| 17***18 | Cylinder Head Group | 1 |
223-9250 Cylinder Head Gp
| 15***23 | Valve; (Inlet) | 12 |
| 15***24 | Valve; (Exhaust) | 12 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
234-5985 Cylinder Head Gp
| 10***25 | Stud; (3/8-16x1.25-In) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***73 | Fastener Group-Cylinder Head; (Marked X) | 10 |
183-4792 Cylinder Head Gp
| 10***25 | Stud; (3/8-16x1.25-In) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***18 | Sensor Group-Temperature; (Intake Manifold Air) | 1 |
4p-5893 Damper Gp
| 16***26 | Damper Assem. | 1 |
| 16***00 | Spacer; (131.57mmx163.6mmx8mm Thk) | 1 |
| 1A***03 | Bolt 12.07 cm(4.75 In.) Long | 6 |
164-5789 Drain Gp-Engine Oil
| 16***89 | Drain Group-Engine Oil | 1 |
| 6B***89 | Nipple (1" Long) | 1 |
| 9M***04 | Clamp Breather And Fumes Disposal; Used On Replacement Engine P/N 5r***83 | 1 |
145-5012 Drive Gp-Accessory
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
| 10***96 | Hose As | 1 |
| 14***71 | Bearing-Drive | 1 |
6i-3638 Drive Gp-Pump -Hydraulic Fan
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 3 |
| 13***07 | Adapter Group-Pump Drive; -Remote | 1 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 4 |
157-3494 Engine Brake Gp
| 14***97 | Nut; (1/2-13-Thd) | 3 |
| 15***94 | Engine Brake Group | 1 |
| 15***95 | Housing Group-Engine Brake | 3 |
148-7486 Engine Brake Gp
| 14***97 | Nut; (1/2-13-Thd) | 3 |
| 14***86 | Engine Brake Group | 1 |
| 16***67 | Bolt-12 Point Head; (1/2-13x146.05-mm) | 3 |
194-4274 Engine Brake Gp
| 14***97 | Nut; (1/2-13-Thd) | 3 |
| 16***67 | Bolt-12 Point Head; (1/2-13x146.05-mm) | 3 |
| 18***50 | Housing Group-Engine Brake | 3 |
164-7793 Fastener Gp-Front Housing
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 16***93 | Fastener Group-Front Housing | 1 |
| 4P***34 | Clip-Ladder; (00800 mm ) | 1 |
108-9382 Fastener Gp-Front Housing
| 10***82 | Fastener Group-Front Housing | 1 |
| 14***68 | Stud-Taperlock | 2 |
| 1F***58 | Nut-Full; (1/2-13-Thd)(Air Lines) | 2 |
109-1657 Fastener Gp-Valve Mechanism
| 10***57 | Fastener Group-Valve Mechanism | 1 |
| 5J***94 | Screw,Cap,Socket He Manifold Mtg | 12 |
| 8L***13 | Strap-Cable(Tie 5.50" Long) | 6 |
4p-6817 Flywheel Gp
| 0S***77 | Bolt (5/8" X 2 1/4") | 12 |
| 4D***04 | Washer,Flat Cover Mtg,Accessory Drive | 12 |
| 4N***14 | Gear; (113-Teeth)(Flywheel Starter) | 1 |
204-2114 Gear Gp-Camshaft
| 10***26 | Dowel | 1 |
| 20***14 | Gear Group-Camshaft | 1 |
| 9X***72 | Bolt-Locking; (3/8-16x0.875-In) | 16 |
137-5921 Gear Gp-Front
| 03***85 | Bolt-12 Point Hd-Engine Flywheel To | 6 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 10***68 | Bearing-Sleeve | 1 |
221-1197 Housing Gp-Engine Brake
| 10***80 | Spool As-Valve | 2 |
| 14***36 | Spring; (Inner)(Control Valve) | 2 |
| 14***96 | Spring; (Outer)(Control Valve) | 2 |
157-3495 Housing Gp-Engine Brake
| 10***80 | Spool As-Valve | 2 |
| 14***36 | Spring; (Inner)(Control Valve) | 2 |
| 14***96 | Spring; (Outer)(Control Valve) | 2 |
189-5950 Housing Gp-Engine Brake
| 10***80 | Spool As-Valve | 2 |
| 14***36 | Spring; (Inner)(Control Valve) | 2 |
| 14***96 | Spring; (Outer)(Control Valve) | 2 |
134-2809 Housing Gp-Flywheel
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
| 13***07 | Housing As-Flywheel | 1 |
165-0094 Housing Gp-Front
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
111-2088 Lifting Gp-Engine
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
| 10***85 | Eye-Lifting | 1 |
| 11***88 | Lifting Group-Engine; (Rear) | 1 |
111-2355 Lifting Gp-Engine
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
| 11***44 | Eye-Lifting | 1 |
| 11***55 | Lifting Group-Engine; (Front) | 1 |
148-7482 Mechanism Gp-Fuel Pump & Valve
| 14***82 | Mechanism Group-Fuel Pump & Valve | 1 |
| 19***98 | Rocker Arm Group | 3 |
| 6I***58 | Bridge-Valve | 12 |
175-4859 Mounting Gp-Alternator
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 2 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 2 |
| 17***84 | Support | 1 |
175-3860 Pan Gp-Oil -Engine
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 10***76 | Seal-O-Ring; (50.17mm Id) | 1 |
185-1933 Panel Gp-Sound Suppression
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 10 |
| 16***17 | Panel As | 1 |
| 16***19 | Panel As | 1 |
134-3071 Piston & Rod Gp
| 13***71 | Piston & Rod Group | 1 |
| 13***05 | Ring-Piston; (Oil Control) | 1 |
| 14***30 | Ring-Piston; (Intermediate) | 1 |
353-9978 Plate As-Front Housing
| 35***78 | Plate As-Front Housing | 1 |
| 7W***92 | Plug-Pipe; (1/2-14 Nptf Thd)(Use Without Air Compressor) | 1 |
| 8T***67 | Plug-Pipe; (Oil Cooler Bonnet Drain) | 1 |
145-6851 Plug Gp-Cylinder Block
| 14***51 | Plug Group-Cylinder Block | 1 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
| 8T***67 | Plug-Pipe; (Oil Cooler Bonnet Drain) | 1 |
234-5996 Plug Gp-Cylinder Head
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
| 18***08 | Plug As; (High Temperature) | 4 |
| 23***96 | Plug Group-Cylinder Head | 1 |
235-3174 Plug Gp-Cylinder Head
| 17***48 | Pulley; (8 Groove) | 1 |
| 23***74 | Plug Group-Cylinder Head | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 4 |
170-1757 Pulley Gp-Crankshaft
| 03***13 | Seal-O-Ring | 2 |
| 06***39 | Seal-O-Ring | 2 |
| 17***57 | Pulley Group-Crankshaft | 1 |
198-9898 Rocker Arm Gp
| 14***68 | Seal-Crankshaft; (Rear)(Flywheel Housing) | 1 |
| 19***98 | Rocker Arm Group | 1 |
319-0785 Seal Gp-Crankshaft -Rear
| 14***67 | Seal Group-Crankshaft; (Front) | 1 |
| 31***85 | Seal Group-Crankshaft; -Rear | 1 |
319-7401 Seal Gp-Crankshaft -Front
| 13***81 | Support-Engine | 1 |
| 13***82 | Support-Engine | 2 |
| 13***96 | Support-Engine | 1 |
132-6236 Support Gp-Engine
| 13***36 | Support Group-Engine | 1 |
| 22***72 | Support-Engine | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
185-6278 Support Gp-Engine -Front
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 18***78 | Support Group-Engine; -Front | 1 |
Braking System
283-1137 Accumulator Gp-Brake -Uncharged
| 0L***58 | Bolt 8.26cm (3.25 In.) Long | 1 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 3 |
111-9040 Accumulator Gp-Brake -Charged
| 06***35 | Valve-Gas | 1 |
| 11***40 | Accumulator Group-Brake; -Charged | 1 |
| 11***10 | Protector-Gas Valve | 1 |
249-5550 Accumulator Gp-Brake -Uncharged, Cold Weather
| 06***35 | Valve-Gas | 1 |
| 11***10 | Protector-Gas Valve | 1 |
| 13***23 | Piston | 1 |
174-1552 Brake Gp-Parking
| 10***72 | Piston | 1 |
| 11***46 | Adapter | 1 |
| 11***06 | Plate-Outer | 5 |
4e-8525 Brake Gp-Parking
| 0L***58 | Bolt 8.26cm (3.25 In.) Long | 1 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 3 |
161-9275 Brake Gp-Service
| 09***49 | Bolt; (M8x1.25x40-mm) | 6 |
| 16***75 | Brake Group-Service | 1 |
| 18***99 | Control Group-Foot Brake | 1 |
169-8258 Control Gp-Foot Brake
| 00***01 | Ring-Retaining | 4 |
| 11***91 | Washer | 4 |
| 16***58 | Control Group-Foot Brake | 1 |
180-3999 Control Gp-Foot Brake
| 12***71 | Knob | 1 |
| 15***24 | Cable As-Parking Brake Control | 1 |
| 18***99 | Control Group-Foot Brake | 1 |
141-4644 Control Gp-Parking Brake
| 11***40 | Accumulator Group-Brake; -Charged | 2 |
| 11***98 | Angle As | 1 |
| 11***31 | Junction Block | 1 |
132-6139 Control Gp-Service Brake
| 11***40 | Accumulator Group-Brake; -Charged | 2 |
| 11***98 | Angle As | 1 |
| 11***31 | Junction Block | 1 |
189-7634 Lines Gp-Parking Brake -Parking
| 12***65 | Ring-Retaining | 2 |
| 12***66 | Plug | 2 |
| 18***34 | Lines Group-Parking Brake; -Parking | 1 |
125-1358 Lines Gp-Service Brake -Front Axle
| 12***58 | Lines Group-Service Brake; -Front Axle | 1 |
| 13***05 | Tube As | 1 |
| 13***12 | Tube As | 1 |
125-1355 Lines Gp-Service Brake -Rear Axle
| 12***65 | Ring-Retaining | 2 |
| 12***66 | Plug | 2 |
| 12***55 | Lines Group-Service Brake; -Rear Axle | 1 |
195-0459 Lines Gp-Service Brake -Loader Frame
| 00***01 | Ring-Retaining | 4 |
| 11***76 | Harness As-Brake; (Right Ft Brake Base) | 1 |
| 11***52 | Pedal-Brake; (Right) | 1 |
156-1561 Lines Gp-Service Brake
| 13***12 | Tube As | 1 |
| 13***13 | Tube As | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
146-3725 Valve & Mtg Gp-Brake Control -Parking
| 00***01 | Ring-Retaining | 3 |
| 10***17 | Switch As-Limit; (Stop Light) | 1 |
| 11***52 | Pedal-Brake; (Right) | 1 |
173-5898 Valve Gp-Brake Control -Service
| 17***98 | Valve Group-Brake; -Service | 1 |
| 25***76 | Repair Kit; (Includes Boot, Seals, Ring, Ball And Springs) | 1 |
| 4J***33 | Seal Fuel Injection Pump | 2 |
106-1774 Valve Gp-Brake Control -Parking
| 10***46 | Rod-Control | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***74 | Valve Group-Brake Control; -Parking | 2 |
4t-2698 Valve Gp-Check -Air Purge
| 11***98 | Boot | 1 |
| 11***99 | Kit-Seal; (Brake Valve)(Service Brake Valve) | 1 |
| 4T***98 | Valve Group-Check; -Air Purge | 1 |
Cooling System
193-8767 Cooling Ar
| 16***57 | Radiator Group | 1 |
| 16***58 | Cooler Group-Hydraulic Oil | 1 |
| 17***52 | Pump & Mtg Group-Hydraulic Fan; -High Ambient Temperature | 1 |
150-4787 Cooling Ar -Includes Xmsn Oil Cooler
| 11***73 | Cooler Group-Hydraulic Oil | 1 |
| 15***87 | Cooling Ar; -Includes Xmsn Oil Cooler | 1 |
| 15***77 | Core As-Radiator | 7 |
164-0054 Cooling Ar
| 16***54 | Cooling Ar | 1 |
| 16***57 | Radiator Group | 1 |
| 16***58 | Cooler Group-Hydraulic Oil | 1 |
164-0055 Cooling Ar-High Ambient Temp
| 11***75 | Fan Group-Suction | 1 |
| 15***75 | Baffle As | 1 |
| 16***55 | Cooling Ar-High Ambient Temp | 1 |
160-5760 Fan & Baffle Gp
| 13***12 | Shroud As-Fan | 1 |
| 14***49 | Support As | 1 |
| 14***59 | Guard As-Fan | 2 |
114-5175 Fan Gp-Suction
| 11***75 | Fan Group-Suction | 1 |
| 13***40 | Fan As; (9-Blade) | 1 |
| 14***70 | Adapter | 1 |
138-2239 Fan Gp-Suction -Axle Oil Cooler
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 13***39 | Fan Group-Suction; -Axle Oil Cooler | 1 |
109-2373 Fastener Gp-Water Pump
| 06***08 | . Bolt; Socket, Clamp-Tubing | 1 |
| 10***72 | Hose; (Radiator) | 6 |
| 10***73 | Fastener Group-Water Pump; (Water Pump Cover) | 1 |
114-5171 Lines Gp-Water
| 06***08 | . Bolt; Socket, Clamp-Tubing | 1 |
| 10***72 | Hose; (Radiator) | 6 |
| 11***86 | Retainer | 7 |
135-4925 Pump Gp-Water
| 13***25 | Pump Group-Water | 1 |
| 15***90 | Core As-Radiator | 7 |
100-9347 Pump Gp-Water
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 10***47 | Pump Group-Water | 1 |
| 10***30 | Bearing As-Roller | 1 |
164-0057 Radiator Gp
| 11***35 | Bracket As | 1 |
| 12***72 | Hose-Hydraulic; (129-In) | 0 |
| 14***65 | Elbow | 2 |
148-7919 Valve Gp-Radiator Drain
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 10***25 | Gasket; (Air Inlet Manifold)(Intake Manifold Inlet) | 1 |
| 14***19 | Valve Group-Radiator Drain | 1 |
Electrical And Starting System
3e-6328 Alarm Gp -Action
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
190-6564 Alternator Gp-Charging
| 11***77 | Cable Assem. | 2 |
| 11***79 | Rod | 4 |
| 11***80 | Holddown Assem. | 2 |
165-5140 Alternator Gp-Charging
| 16***40 | Alternator Group-Charging; -Waste Handling | 2 |
| 17***18 | Wire As | 1 |
| 19***35 | Pulley; (8 Groove) | 1 |
114-5179 Battery & Wiring Gp
| 11***79 | Battery & Wiring Group | 1 |
| 12***49 | Stud; (3/8-16, 5/8-18x3.1-In) | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 1 |
126-7631 Connection Gp-Electrical
| 11***55 | Control Group-Engine Electronic; (Engine Electronic) | 1 |
| 12***31 | Connection Group-Electrical; (Cylinder Block Ground) | 1 |
| 12***70 | Stud | 2 |
136-3117 Control & Mtg Gp-Engine Elek
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 13***17 | Control & Mtg Group-Engine Elek | 1 |
115-3055 Control Gp-Engine Electronic
| 10***83 | Bolt; (Hex Socket) (M10x1.75x70mm) | 1 |
| 11***55 | Control Group-Engine Electronic; (Engine Electronic) | 1 |
| 12***37 | Washer; (17.5x40x4-mm Thk) | 1 |
114-5192 Control Gp-Lift & Tilt Pos
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 11***92 | Control Group-Lift & Tilt Pos | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
172-9391 Control Gp-Unprogrammed
| 10***04 | Warning Group-Backup | 1 |
| 11***43 | Wiring Group-Bumper | 1 |
| 11***74 | Fastener Group-Electronics | 1 |
172-9389 Control Gp-Unprogrammed -Power Train
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 17***89 | Control Group-Unprogrammed; -Steering, Transmission | 1 |
114-5107 Electrical Ar
| 11***07 | Electrical Ar | 1 |
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 24***15 | Software Group-Implement | 1 |
174-6016 Electronics Gp-Implement
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 17***16 | Electronics Group-Implement | 1 |
| 23***97 | Software Group-Power Train | 1 |
174-6017 Electronics Gp-Power Train
| 09***87 | Plate | 2 |
| 15***61 | Boss | 2 |
| 17***17 | Electronics Group-Power Train | 1 |
134-6724 Enclosure Gp-Electronics Bay
| 13***24 | Enclosure Group-Electronics Bay | 1 |
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 4 |
114-5174 Fastener Gp-Electronics
| 11***74 | Fastener Group-Electronics | 1 |
| 15***39 | Lines Group-Fuel Heater; -With Cab Heater Lines | 1 |
| 1H***28 | Seal (3.73 In. Inside Diameter) | 1 |
160-4248 Heater Ar-Fuel
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 6 |
| 15***39 | Lines Group-Fuel Heater; -With Cab Heater Lines | 1 |
| 16***48 | Heater Ar-Fuel | 1 |
190-3132 Heater Gp-Jacket Water
| 13***17 | Cap As-Dust | 1 |
| 19***32 | Heater Group-Jacket Water | 1 |
| 20***01 | Element As-Jacket Water Heater; (240-Volt, 1500-Watt)(1500 Watt-220 Volt) | 1 |
4n-0730 Heater Gp-Jacket Water
| 4N***30 | Heater Group-Jacket Water | 1 |
| 4N***27 | Cord As-Heater Element; -Jacket Water | 1 |
| 6N***04 | Cap As-Dust; (Jacket Water Heater Elements) | 1 |
207-7030 Heater Gp-Jacket Water
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 20***30 | Heater Group-Jacket Water; -120-Volt, 1500-Watt | 1 |
3e-6389 Lamp Gp-Dome -With Switch
| 3E***89 | Lamp Group-Dome; -With Switch-Cab, Rh, Lh | 1 |
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
147-0319 Lamp Gp-Flood
| 14***19 | Lamp Group-Flood; -Engine Work, Rh, Lh | 1 |
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
153-2073 Lamp Gp-Flood
9x-4381 Lamp Gp-Flood -Rops
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
| 18***49 | Clamp | 2 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
161-3509 Lamp Gp-Head -Low Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***09 | Lamp Group-Head; -Low Beam | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
3e-6467 Lamp Gp-Signal -Rear Turn; Stop, Tail
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 3E***67 | Lamp Group-Signal; -Rear Turn; Stop, Tail | 1 |
334-5410 Lamp Gp-Signal -Turn
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 33***10 | Lamp Group-Signal; -Turn | 1 |
3e-6466 Lamp Gp-Signal -Rear Turn
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 3E***71 | Wedge; (Receptacle Lock) (3 Pin) | 1 |
| 3E***66 | Lamp Group-Signal; -Rear Turn, Parking | 1 |
130-3453 Lamp Gp-Signal -Stop, Tail
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***53 | Lamp Group-Signal; -Stop, Tail | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
135-0426 Lamp Gp-Signal -Stop, Tail
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***26 | Lamp Group-Signal; (24-Volt, Stop, Tail)(Stop/Tail) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
199-3368 Lamp Gp-Signal
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 19***68 | Lamp Group-Signal; -Turn | 1 |
128-6983 Lamp Gp-Warning Beacon -Rotating
| 11***87 | Lighting Group-Flood & Signal | 1 |
| 12***83 | Lamp Group-Warning Beacon; -Rotating, Amber | 1 |
| 15***99 | Switch Group-Signal | 1 |
138-9806 Lighting Ar-Signal
| 11***85 | Lighting Group-Flood; -4-Lamp, Front | 1 |
| 13***06 | Lighting Ar-Signal | 1 |
| 8R***45 | Lighting Group-Stop; -2-Lamp, Rear | 1 |
114-5189 Lighting Ar-Stop & Flood
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***74 | Guard As | 2 |
| 11***89 | Lighting Ar-Stop & Flood | 1 |
152-9027 Lighting Gp-Flood -2-Lamp, Cab, Front
| 14***88 | Bracket As | 2 |
| 14***19 | Lamp Group-Flood; -Engine Work, Rh, Lh | 4 |
| 15***24 | Harness As-Lighting; (Floodlight) | 1 |
114-5186 Lighting Gp-Flood -Hood
| 11***86 | Lighting Group-Flood; -Hood | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
| 8T***33 | Nut (M10x1.50 Thd) | 4 |
152-9028 Lighting Gp-Flood -4-Lamp, Cab
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 2 |
| 11***71 | Clip As-Connector; (6-Pin) | 2 |
115-0525 Lighting Gp-Flood -4-Lamp, Cab Front, Rear
| 11***25 | Lighting Group-Flood; -4-Lamp, Cab Front, Rear | 1 |
| 15***23 | Harness Assembly-Cab Flood Lamps; (Cab Floodlight)(Flood) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
114-5185 Lighting Gp-Flood -4-Lamp, Front
| 11***85 | Lighting Group-Flood; -4-Lamp, Front | 1 |
| 14***88 | Bracket As | 4 |
| 14***13 | Harness As-Lighting; (Flood) | 1 |
114-5187 Lighting Gp-Flood & Signal
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 2 |
| 11***87 | Lighting Group-Flood & Signal | 1 |
8r-5645 Lighting Gp-Stop -2-Lamp, Rear
| 11***84 | Harness As-Lighting | 1 |
| 12***83 | Lamp Group-Warning Beacon; -Rotating, Amber | 1 |
| 12***50 | Channel As | 1 |
190-3980 Lighting Gp-Warning Beacon
| 11***69 | Clip As-Connector; (3-Pin) | 1 |
| 11***10 | Grommet | 1 |
| 16***17 | Sensor Group-Position; -Stick | 1 |
124-4672 Sensor Gp-Pressure
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 12***72 | Pressure Sensor Group; -Lift Cylinder Oil | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
169-3301 Sensor & Mtg Gp-Lift Position
| 11***69 | Clip As-Connector; (3-Pin) | 1 |
| 15***10 | Plate | 1 |
| 16***17 | Sensor Group-Position; -Stick | 1 |
169-3302 Sensor & Mtg Gp-Tilt Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***02 | Sensor & Mtg Group-Tilt Position | 1 |
| 3E***71 | Wedge; (Receptacle Lock) (3 Pin) | 1 |
214-4863 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 21***63 | Sensor Group-Position; -Rotary-Tc Impeller Clutch, Lh Pedal | 1 |
214-4862 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
| 21***62 | Sensor Group-Position; -Control Lever | 1 |
204-7949 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 20***49 | Sensor Group-Position; -Throttle | 1 |
169-0417 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***17 | Sensor Group-Position; -Stick | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
161-8979 Sensor Gp-Position -Control Lever
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 16***79 | Sensor Group-Position; -Steering, Xmsn Control Handle | 1 |
194-6725 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***49 | Strap; (Marker) | 1 |
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
161-9931 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***31 | Sensor Group-Pressure; -Atmospheric | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
194-6722 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 1 |
143-9176 Sensor Gp-Pressure -Implement Pump Oil
| 14***76 | Sensor Group-Pressure; -Implement Pump Oil | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 3 |
194-6724 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***24 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
193-2550 Sensor Gp-Speed
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 19***50 | Sensor Group-Speed; -Tmsn, Torque Converter Output | 1 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
131-0427 Sensor Gp-Temperature
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 13***27 | Sensor Group-Temperature; -Engine Coolant | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
102-2240 Sensor Gp-Temperature -Engine Coolant
| 10***40 | Sensor Group-Temperature; -Output Transfer Gear Oil | 1 |
| 11***50 | Sleeve (31cm); (31-cm) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
100-3055 Sensor Gp-Temperature -Transmission Oil
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
277-9712 Service Gp-Implement
| 27***12 | Service Group-Implement | 1 |
277-9711 Software Gp-Implement
| 13***48 | Starting Aid Group-Ether | 1 |
| 14***15 | Harness As-Power; (Ether Staring Aid) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 0 |
136-2048 Starting Aid Gp-Ether
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
114-5176 Starting Aid Gp-Ether
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***76 | Starting Aid Group-Ether | 1 |
| 14***79 | Bracket As | 1 |
237-1962 Starting Motor Gp-Electric
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***62 | Starting Motor Group-Electric | 1 |
105-4729 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 13 |
6v-0890 Starting Motor Gp-Electric
| 10***28 | Wire As | 1 |
| 4N***59 | Gasket; (Starting Motor) | 1 |
| 6V***90 | Starting Motor Group-Electric; (Delco Remy) | 2 |
164-7577 Switch Gp-Bypass -Power Train Oil Filter
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
7n-0719 Switch Gp-Disconnect -Battery
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 17***07 | Bracket As | 1 |
| 18***90 | Switch As-Foot; (Engine Brake) | 1 |
176-8350 Switch Gp-Engine Brake
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***50 | Switch Group-Engine Brake | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
134-6054 Switch Gp-Flow -Coolant
| 13***54 | Switch Group-Flow; -Coolant | 1 |
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
175-2322 Switch Gp-Magnetic -Start Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
175-2324 Switch Gp-Magnetic -Start Relay
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
3e-0075 Switch Gp-Magnetic -Start Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
196-5538 Switch Gp-Payload Store -Remote
| 19***38 | Switch Group-Payload Store; -Remote | 1 |
153-4804 Switch Gp-Pressure -Autolube Actuation
| 15***04 | Switch Group-Pressure; -Autolube Actuation | 1 |
| 18***71 | Switch As-Rocker; (Ride Control) | 1 |
163-4254 Switch Gp-Ride Control
| 16***54 | Switch Group-Ride Control | 1 |
| 22***69 | Switch As-Rocker; (Torque Converter Lockup Clutch) | 1 |
132-3612 Switch Gp-Rocker -Torque Converter Lockup Clutch
| 13***12 | Switch Group-Rocker; -Torque Converter Lockup Clutch | 1 |
| 16***83 | Lamp-Yellow; (24 Volt)(Overload Warning) | 1 |
| 18***49 | Switch As-Rocker; (Torque Converter Lockup Clutch) | 1 |
208-0545 Switch Gp-Rocker -Torque Converter Lockup Clutch
| 10***58 | Flasher As; (24-Volt) | 1 |
| 16***84 | Lamp; (24-Volt)(Green) | 2 |
| 20***45 | Switch Group-Rocker; -Torque Converter Lockup Clutch | 1 |
154-6699 Switch Gp-Signal
| 15***99 | Switch Group-Signal | 1 |
| 27***41 | Switch Group-Wiper; -Intermittent-Front, Rear | 1 |
275-7741 Switch Gp-Wiper -Intermittent
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 21***00 | Back-Up Alarm Assem. | 1 |
| 27***41 | Switch Group-Wiper; -Intermittent-Front, Rear | 1 |
180-3732 Switch Gp-Wiper -Intermittent-Rear
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 18***32 | Switch Group-Wiper; -Intermittent-Rear | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
109-6904 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
189-7446 Wiring Gp-Autolube Control
| 03***48 | Clip; (11.11mm .437in Id) | 8 |
| 11***69 | Clip As-Connector; (3-Pin) | 1 |
| 11***70 | Clip As-Connect; (4-Pin) | 2 |
114-5143 Wiring Gp-Bumper
| 09***68 | Washer; (5x16x1.2-mm Thk) | 8 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
136-2628 Wiring Gp-Cab
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***28 | Wiring Group-Cab | 1 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
243-6465 Wiring Gp-Electrohydraulic -3rd Lever Hydraulic Lockout
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***27 | Screw-Pan Head | 4 |
114-5182 Wiring Gp-Electronics Bay
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***82 | Wiring Group-Electronics Bay | 1 |
114-5177 Wiring Gp-Engine
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 5 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 10***00 | Kit-Connecting Plug; (12-Pin)(Electronic Control) | 1 |
153-6463 Wiring Gp-Engine
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
114-5178 Wiring Gp-Front
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***00 | Kit-Connecting Plug; (12-Pin)(Electronic Control) | 3 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 5 |
114-5184 Wiring Gp-Machine
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
114-5181 Wiring Gp-Power Train
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
114-5183 Wiring Gp-Rear
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***83 | Wiring Group-Rear | 1 |
| 11***71 | Clip As-Connector; (6-Pin) | 1 |
114-5194 Wiring Gp-Sensor -Lift, Tilt Position
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***94 | Wiring Group-Sensor; -Lift, Tilt Position | 1 |
| 11***71 | Clip As-Connector; (6-Pin) | 1 |
198-0976 Wiring Gp-Sensor
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***37 | Plate | 1 |
141-8719 Wiring Gp-Sensor -High Lift
| 11***69 | Clip As-Connector; (3-Pin) | 2 |
| 12***72 | Pressure Sensor Group; -Lift Cylinder Oil | 2 |
| 14***19 | Wiring Group-Sensor; -High Lift | 1 |
163-3997 Wiring Gp-Shutoff -Ground Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***10 | Bracket As | 1 |
| 13***00 | Clip; (Tab) | 1 |
271-7459 Wiring Gp-Tilt Regen Control
| 09***10 | Clamp | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 1 |
273-0049 Wiring Gp-Tilt Regen Control
| 12***58 | Lines Group-Service Brake; -Front Axle | 1 |
| 13***51 | Differential & Bevel Gear Group | 1 |
| 13***62 | Axle Group-Fixed; -Front | 1 |
Engine Arrangement
183-3850 Engine Ar
| 17***50 | Switch Group-Engine Brake | 1 |
| 18***88 | Engine Ar-Complete | 1 |
| 18***50 | Engine Ar | 1 |
133-3840 Engine Ar-Complete
| 10***47 | Pump Group-Water | 1 |
| 10***36 | Cover Group-Cylinder Block; -Remote | 1 |
| 10***82 | Fastener Group-Front Housing | 1 |
238-1808 Engine Ar-Complete
| 10***47 | Pump Group-Water | 1 |
| 10***36 | Cover Group-Cylinder Block; -Remote | 1 |
| 10***82 | Fastener Group-Front Housing | 1 |
180-4188 Engine Ar-Complete
| 10***47 | Pump Group-Water | 1 |
| 10***36 | Cover Group-Cylinder Block; -Remote | 1 |
| 10***82 | Fastener Group-Front Housing | 1 |
238-1807 Engine Ar-Complete
| 10***47 | Pump Group-Water | 1 |
| 10***36 | Cover Group-Cylinder Block; -Remote | 1 |
| 10***82 | Fastener Group-Front Housing | 1 |
167-9672 Engine Ar-Core
| 12***48 | Base Group-Valve Cover & Inj Harn | 1 |
| 13***71 | Piston & Rod Group | 6 |
| 13***21 | Gear Group-Front | 1 |
238-1820 Engine Ar-Core
| 12***48 | Base Group-Valve Cover & Inj Harn | 1 |
| 13***71 | Piston & Rod Group | 6 |
| 13***21 | Gear Group-Front | 1 |
114-5106 Installation Ar-Engine
| 10***29 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 11***06 | Installation Ar-Engine | 1 |
| 13***35 | Muffler Group | 1 |
Frame And Body
189-7559 Bumper As-Rear -Rear
| 13***49 | Drawbar Group | 1 |
| 16***57 | Plate | 1 |
| 16***33 | Bumper As | 1 |
189-7560 Bumper Gp-Rear -Rear
| 18***60 | Bumper Group-Rear; -Rear | 1 |
114-5129 Bumper Gp-Rear
| 11***29 | Bumper Group-Rear | 1 |
| 13***49 | Drawbar Group | 1 |
| 18***59 | Bumper As-Rear; -Rear | 1 |
153-4805 Control Gp-Automatic Lube
| 15***05 | Control Group-Automatic Lube; -(Custom) | 1 |
| 18***22 | Counterweight As | 1 |
| 8K***03 | Washer; (33.5x88.9x12-mm Thk) | 12 |
189-7520 Counterweight Gp
| 12***00 | Bolt; (M30x3.5x260-mm) | 14 |
| 18***20 | Counterweight Group | 1 |
| 30***56 | Counterweight As | 1 |
189-7571 Counterweight Gp
| 13***28 | Door As-Access; (Disc Switch, Auxiliary Receptacle) | 1 |
| 13***41 | Door As-Access; (Battery Compartment) | 1 |
| 13***43 | Plate As | 1 |
192-8852 Cover Gp-Bumper -Battery Compartment Access, Rh
| 14***52 | Rod As | 1 |
| 19***52 | Cover Group-Bumper; -Battery Compartment Access, Rh | 1 |
| 19***07 | Rod As | 1 |
139-3233 Cover Gp-Bumper -Battery Compartment Access, Rh
| 10***10 | Hinge | 3 |
| 13***33 | Cover Group-Bumper; -Battery Compartment Access, Rh | 1 |
| 14***52 | Rod As | 1 |
192-8851 Cover Gp-Bumper -Battery Compartment Access, Rh
| 10***10 | Hinge | 2 |
| 14***52 | Rod As | 1 |
| 19***51 | Cover Group-Bumper; -Battery Compartment Access, Rh | 1 |
180-9272 Door Gp-Access -Hood Top
| 14***73 | Handle As | 1 |
| 18***72 | Door Group-Access; -Hood Top | 1 |
| 1V***34 | Pin | 1 |
178-8883 Door Gp-Access -Radiator Guard Side
| 12***76 | Cam-Latch | 1 |
| 12***68 | Lock As | 1 |
| 17***81 | Latch Assem. | 1 |
163-8033 Door Gp-Access -Hood Side, Rear, Rh
| 16***33 | Door Group-Access; -Hood Side, Rear, Rh | 1 |
| 17***81 | Latch Assem. | 1 |
| 17***84 | Plate As | 1 |
136-5049 Drawbar Gp
| 13***49 | Drawbar Group | 1 |
| 21***48 | Plate | 1 |
| 21***25 | Fender As; (Rh) | 1 |
313-5472 Fender Gp
| 22***29 | Fender Group-Front | 1 |
| 31***72 | Fender Group | 1 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 12 |
170-7339 Fender Gp-Front
| 17***39 | Fender Group-Front | 1 |
| 21***48 | Plate | 1 |
| 21***23 | Fender As-Front; (Rh) | 1 |
114-5125 Fender Gp-Front
| 11***25 | Fender Group-Front | 1 |
| 14***49 | Strip | 2 |
| 31***72 | Fender Group | 1 |
224-4229 Fender Gp-Front
| 14***95 | Sheet As-Lh | 1 |
| 14***97 | Sheet As-Lh | 1 |
| 14***98 | Plate As; (Lh) | 1 |
142-5800 Fender Gp-Rear
| 14***97 | Sheet As-Lh | 1 |
| 14***98 | Plate As; (Lh) | 1 |
| 14***00 | Fender Group-Rear | 1 |
114-5126 Firewall Gp
| 11***26 | Firewall Group | 1 |
| 13***73 | Bearing-Sleeve | 2 |
| 15***52 | Spacer | 1 |
198-4270 Frame As-Loader
| 19***70 | Frame As-Loader | 1 |
| 20***05 | Stop | 2 |
208-2379 Frame As-Rear
| 10***50 | Plate | 4 |
| 16***22 | Guard Group-Steering Cylinder | 1 |
| 16***97 | Plate As-Loader Frame | 1 |
199-3066 Frame As-Rear -Axle Oscillation
| 10***50 | Plate | 6 |
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 3 |
| 13***93 | Boss; (M12x1.75x20-mm) | 1 |
168-6464 Guard Ar-Steering Cylinder
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 8 |
| 13***87 | Guard As | 1 |
| 16***64 | Guard Ar-Steering Cylinder | 1 |
150-1541 Guard Gp-Crankcase
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 6 |
| 15***41 | Guard Group-Crankcase | 1 |
| 18***56 | Plate | 2 |
189-7685 Guard Gp-Crankcase
| 11***75 | Washer; (13.5x32x8-mm Thk) | 3 |
| 18***85 | Guard Group-Crankcase | 1 |
| 19***30 | Guard As | 1 |
189-7684 Guard Gp-Crankcase -Custom
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 6 |
| 18***56 | Plate | 2 |
| 18***83 | Guard As | 1 |
198-9229 Guard Gp-Front
| 15***32 | Guard As | 1 |
| 16***87 | Guard | 1 |
| 19***29 | Guard Group-Front | 1 |
158-8785 Guard Gp-Hydraulic Tank
| 15***85 | Guard Group-Hydraulic Tank | 1 |
| 16***21 | Plate | 0 |
| 16***87 | Guard | 1 |
160-3857 Guard Gp-Hydraulic Tank
| 16***57 | Guard Group-Hydraulic Tank | 1 |
| 18***61 | Guard | 1 |
189-7862 Guard Gp-Oil Level Gauge -Transmission
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 4 |
| 13***86 | Plate | 2 |
| 13***88 | Guard As | 1 |
114-5137 Guard Gp-Power Train
| 11***37 | Guard Group-Power Train | 1 |
| 13***82 | Bracket As | 4 |
| 13***66 | Guard As | 1 |
114-5123 Guard Gp-Radiator
| 11***23 | Guard Group-Radiator | 1 |
| 17***21 | Sheet As | 1 |
| 17***22 | Bar | 1 |
171-6786 Guard Gp-Rear
| 15***06 | Block | 2 |
| 17***86 | Guard Group-Rear | 1 |
| 8T***51 | Boss-Weld | 3 |
189-7441 Hardware Gp-Rear Frame
| 13***39 | Cap | 1 |
| 13***00 | Bolt-Plt; (M16 X 2.0 X 90) | 10 |
| 14***50 | Pin | 1 |
114-5118 Hitch Gp-Articulating
| 11***18 | Hitch Group-Articulating | 1 |
| 13***75 | Rail As; (Rh) | 1 |
| 13***77 | Rail As; (Lh) | 1 |
114-5122 Hood & Guard Gp
| 11***22 | Hood & Guard Group | 1 |
| 11***25 | Fender Group-Front | 1 |
| 15***44 | Ladder Group | 1 |
170-7340 Ladder & Fender Ar
| 13***18 | Handrail As | 1 |
| 13***19 | Handrail As | 1 |
| 17***13 | Ladder Group | 1 |
164-6085 Ladder & Fender Ar -Rh Stairs
| 14***00 | Fender Group-Rear | 1 |
| 16***85 | Ladder & Fender Ar; -Rh Stairs | 1 |
| 17***39 | Fender Group-Front | 1 |
164-6084 Ladder & Fender Ar
| 11***25 | Fender Group-Front | 1 |
| 14***99 | Ladder Group; -Rh | 1 |
| 16***84 | Ladder & Fender Ar | 1 |
170-7314 Ladder Gp -Alternate Exit
| 09***65 | Grommet | 2 |
| 14***66 | Elbow Group | 1 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 1 |
170-7313 Ladder Gp
| 13***23 | Ladder As | 1 |
| 17***13 | Ladder Group | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 4 |
153-7044 Ladder Gp
| 13***54 | Step Group | 2 |
| 13***21 | Stair As | 1 |
| 13***31 | Handrail As | 1 |
142-5799 Ladder Gp -Rh
| 10***34 | Chain | 1 |
| 13***20 | Handrail As | 1 |
| 13***21 | Handrail As | 1 |
114-5133 Ladder Gp -Lh
| 11***33 | Ladder Group; -Lh | 1 |
| 13***66 | Sheet | 1 |
| 14***01 | Stair As | 1 |
189-7433 Lines Gp-Automatic Lubrication -Rear Frame
| 14***58 | Union, 90 Deg -6 | 2 |
| 18***33 | Lines Group-Automatic Lubrication; -Rear Frame | 1 |
| 18***36 | Lines Group-Lubrication; -Tilt, R St Cyl; Lower Hitch | 1 |
189-7533 Lines Gp-Automatic Lubrication -Loader Frame
| 15***57 | Block | 1 |
| 17***06 | Plate | 1 |
| 18***97 | Hose As | 1 |
229-2621 Lines Gp-Automatic Lubrication -Boom
| 15***57 | Block | 1 |
| 18***97 | Hose As | 1 |
| 18***00 | Hose As | 1 |
227-3049 Lines Gp-Automatic Lubrication -Boom
| 15***57 | Block | 1 |
| 18***97 | Hose As | 1 |
| 18***98 | Hose As | 1 |
189-7481 Lines Gp-Fill
| 15***54 | Tube As | 2 |
| 15***55 | Tube As | 1 |
| 18***81 | Lines Group-Fill | 1 |
198-2625 Lines Gp-Grease
| 14***63 | Elbow Group | 1 |
| 14***65 | Elbow | 1 |
| 18***90 | Hose As | 1 |
158-6185 Lines Gp-Grease -Tilt Link Pins
| 14***91 | Tube As | 1 |
| 14***94 | Tube As | 1 |
| 14***95 | Tube As | 1 |
229-2624 Lines Gp-Lubrication -Link Pins, Rh, Lh, C-Pin, Rh
| 14***58 | Link | 1 |
| 1J***19 | Pin-Cotter; (Pin) | 2 |
| 22***24 | Lines Group-Lubrication; -Link Pins, Rh, Lh, C-Pin, Rh | 1 |
229-2623 Lines Gp-Lubrication -Tilt Cyl, Link Pins, Lh C-Pin
| 07***17 | Hose As | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 1 |
189-7437 Lines Gp-Lubrication -Left Steer Cyl; Upper Hitch
| 14***07 | Valve Group-Lube Distribution; -2-Injector | 1 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 1 |
| 18***82 | Hose As | 1 |
189-7435 Lines Gp-Lubrication -R, L Steer Cyl; Axle Trunnion
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 07***17 | Hose As | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
189-7434 Lines Gp-Lubrication -Supply, Return Lines
| 00***49 | Connector-Second Type | 1 |
| 18***25 | Hose As; (Bucket, Lh Pin) | 1 |
| 18***34 | Lines Group-Lubrication; -Supply, Return Lines | 1 |
227-3050 Lines Gp-Lubrication -B-Pin, Rh, Lh
| 07***17 | Hose As | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 18***31 | Hose As; (Bucket, Lh Pin) | 1 |
189-7436 Lines Gp-Lubrication -Tilt, R St Cyl; Lower Hitch
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 18***25 | Hose As; (Bucket, Lh Pin) | 1 |
| 18***36 | Lines Group-Lubrication; -Tilt, R St Cyl; Lower Hitch | 1 |
114-5121 Link Gp-Steering Frame Lock
| 09***64 | Grommet | 2 |
| 09***63 | Grommet | 2 |
| 11***21 | Link Group-Steering Frame Lock | 1 |
2q-8428 Lubrication Ar-Automatic
| 09***64 | Grommet | 2 |
| 09***63 | Grommet | 2 |
| 13***23 | Platform As; (Rh) | 1 |
2q-8429 Lubrication Ar-Automatic
| 14***10 | Panel As-Rh | 1 |
| 14***11 | Panel As-Lh | 1 |
| 16***27 | Plate | 2 |
163-1034 Panel Gp-Side -Rh
| 16***34 | Panel Group-Side; -Rh | 1 |
| 18***83 | Housing-Pump | 1 |
| 18***84 | Gasket | 1 |
143-9361 Panel Gp-Side -Hood Side, Front, Rh
| 14***12 | Panel As-Rh | 1 |
| 14***13 | Panel As-Lh | 1 |
| 14***61 | Panel Group-Side; -Hood Side, Front, Rh | 1 |
194-7925 Pump Gp-Lubrication
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***83 | Housing-Pump | 1 |
| 18***84 | Gasket | 1 |
189-7651 Tank & Pump Gp-Lubrication
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 00***54 | Nipple-Pipe | 2 |
| 03***06 | Adapter-Pipe; (To Transmission) | 1 |
070-0643 Pump Gp-Lubrication
| 07***43 | Pump Group-Lubrication | 1 |
| 19***28 | Motor As-Hydraulic | 1 |
| 19***95 | Valve | 1 |
275-0702 Pump Gp-Lubrication -Automatic Lubrication System
| 13***10 | Shield As; (Rh) | 1 |
| 13***11 | Shield As; (Lh) | 1 |
| 27***02 | Pump Group-Lubrication; -Automatic Lubrication System | 1 |
070-0641 Pump Gp-Lubrication
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 00***54 | Nipple-Pipe | 1 |
| 03***06 | Adapter-Pipe; (To Transmission) | 1 |
164-4865 Shield Gp-Engine Compartment
| 13***43 | Spacer; (8.1x13x22.2-mm Thk) | 22 |
| 13***45 | Washer; (7.2x19.1x3.1-mm Thk) | 11 |
| 14***40 | Clip | 11 |
164-4866 Shield Gp-Engine Compartment
| 11***58 | Plate | 4 |
| 13***52 | Step As | 2 |
| 13***54 | Bracket | 2 |
134-2554 Step Gp
| 13***54 | Step Group | 1 |
| 15***41 | Guard Group-Crankcase | 1 |
| 16***06 | Suppression Group-Sound | 1 |
164-4872 Suppression Ar-Sound
| 16***96 | Baffle | 1 |
| 16***97 | Insulation-Rh | 1 |
| 16***98 | Insulation-Lh | 1 |
164-4871 Suppression Ar-Sound
| 16***65 | Shield Group-Engine Compartment | 1 |
| 16***71 | Suppression Ar-Sound | 1 |
164-3706 Suppression Gp-Sound
| 16***06 | Suppression Group-Sound | 1 |
| 18***15 | Insulation | 1 |
| 18***16 | Insulation | 1 |
164-4870 Suppression Gp-Sound
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 00***54 | Nipple-Pipe | 2 |
| 03***06 | Adapter-Pipe; (To Transmission) | 1 |
227-3048 Valve & Lines Gp-Lubrication -Lh C-Pin, Lh Tilt Link Pin
| 14***07 | Valve Group-Lube Distribution; -2-Injector | 1 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 1 |
| 18***82 | Hose As | 1 |
229-2622 Valve & Lines Gp-Lubrication -B-Pin, Rh, Lh
| 19***54 | Packing | 1 |
| 22***22 | Valve & Lines Group-Lubrication; -B-Pin, Rh, Lh | 1 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 3 |
227-3047 Valve & Lines Gp-Lubrication -Lh, Rh Link Pins, Rh C-Pin, Rh Tilt Pin
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 18***25 | Hose As; (Bucket, Lh Pin) | 1 |
| 18***43 | Hose As | 3 |
141-2107 Valve Gp-Lube Distribution -2-Injector
| 06***35 | Valve-Gas | 1 |
| 11***10 | Protector-Gas Valve | 1 |
| 13***23 | Piston | 1 |
8w-2597 Valve Gp-Lube Distribution -4-Injector
| 19***54 | Packing | 2 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 2 |
| 8W***55 | Kit-Injector; (Lube Valve) | 1 |
5t-5009 Valve Gp-Lube Distribution -3-Injector
| 19***54 | Packing | 4 |
| 5T***09 | Valve Group-Lube Distribution; -3-Injector-Steering Cyl, Linkage, Rh, Lh-Hoist, Rear Susp Cyl, Rh, Lh-Front Susp, Steer Cyl, Rh, Lh | 1 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 4 |
Fuel System
114-5197 Adapter Gp-Fast Fill Fuel
| 03***42 | Seal-O-Ring; (11.89mm Id) | 2 |
| 11***97 | Adapter Group-Fast Fill Fuel | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 2 |
191-4465 Filter Gp-Fuel -Secondary
| 12***57 | Base As-Filter; (Primary Fuel Filter) | 1 |
| 12***72 | Filter As-Water Sep & Fuel | 1 |
| 12***75 | Bowl As-Water Collection; (Water Separator, Fuel Filter) | 1 |
131-0463 Filter Gp-Water Sep & Fuel -Primary
| 11***41 | Lines Group-Cab Heater; -Coolant | 1 |
| 13***63 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 16***25 | Hose As | 1 |
160-4246 Fuel Ar-Conventional Fill
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 6 |
| 11***41 | Lines Group-Cab Heater; -Coolant | 1 |
| 16***46 | Fuel Ar-Conventional Fill | 1 |
160-4247 Fuel Ar-Fast Fill
| 11***97 | Adapter Group-Fast Fill Fuel | 1 |
| 15***39 | Lines Group-Fuel Heater; -With Cab Heater Lines | 1 |
| 16***47 | Fuel Ar-Fast Fill | 1 |
160-4249 Fuel Ar-Fast Fill -With Fuel Heater
| 10***72 | Spacer; (9.8x15.85x37.6-mm Thk) | 1 |
| 16***49 | Fuel Ar-Fast Fill; -With Fuel Heater | 1 |
| 21***24 | Injector Group-Fuel | 1 |
211-3024 Injector Gp-Fuel
| 13***63 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 13***41 | Pump Group-Fuel Priming; (Hand) | 1 |
| 14***68 | Bracket As | 1 |
153-2875 Injector Gp-Fuel
| 15***75 | Injector Group-Fuel | 1 |
| 23***28 | Seal-O-Ring; (32.99mm Id) | 1 |
| 23***75 | Seal-O-Ring; (36.09mm Id) | 1 |
180-3555 Lines Gp-Fuel
| 03***37 | Connector-Port | 1 |
| 03***42 | Elbow Hose Assembly To | 1 |
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 2 |
114-5131 Lines Gp-Fuel
| 11***31 | Lines Group-Fuel | 1 |
| 13***63 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 13***41 | Pump Group-Fuel Priming; (Hand) | 1 |
159-1539 Lines Gp-Fuel Heater -With Cab Heater Lines
| 0S***99 | Stud (1.4325" Long) | 2 |
| 10***69 | Seal-O-Ring; (Fuel Transfer Pump) | 2 |
| 13***16 | Cover | 1 |
150-4279 Pump & Mtg Gp-Fuel Transfer -Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***72 | Tank As-Fuel | 1 |
| 13***44 | Kit-Repair; (Fuel Level Gauge)(Fuel Level) | 1 |
114-5130 Tank Gp-Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 11***30 | Tank Group-Fuel | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
156-5783 Valve Gp-Check -Fuel
| 15***83 | Valve Group-Check; -Fuel | 1 |
| 23***96 | Valve Group-Check; -Fuel Filter | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
233-6742 Valve Gp-Check -Fuel
| 23***42 | Valve Group-Check; -Fuel Filter | 1 |
| 23***81 | Seal-O-Ring | 1 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
281-2725 Valve Gp-Check -Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
238-0296 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 23***96 | Valve Group-Check; -Fuel Filter | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
Hydraulic System
185-7398 Accumulator Gp-Ride Control -Uncharged
| 15***36 | Valve-Gas; (Brake) | 1 |
| 17***93 | Kit-Seal; (Hydraulic Accumulator) | 1 |
| 17***03 | Film-Warning; (Accum, High Press, Read Omm)(Plate-Name) | 1 |
176-3847 Accumulator Gp-Ride Control -Charged
| 17***47 | Accumulator Group-Ride Control; -Charged | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 5F***35 | Spring | 1 |
217-6719 Actuator Gp-Pilot Control -Proportional Solenoid
| 03***05 | Seal-O-Ring | 1 |
| 11***83 | Housing | 1 |
| 11***85 | Retainer | 1 |
217-6720 Actuator Gp-Pilot Control -Proportional Solenoid
| 03***05 | Seal-O-Ring | 1 |
| 11***83 | Housing | 1 |
| 11***85 | Retainer | 1 |
179-8248 Actuator Gp-Pilot Control
| 17***47 | Accumulator Group-Ride Control; -Charged | 1 |
| 17***48 | Actuator Group-Pilot Control | 1 |
180-9550 Actuator Gp-Pilot Control
| 03***05 | Seal-O-Ring | 9 |
| 11***83 | Housing | 1 |
| 11***85 | Retainer | 1 |
197-7356 Control & Lines Gp-Ride
| 03***05 | Seal-O-Ring | 1 |
| 11***83 | Housing | 1 |
| 11***85 | Retainer | 1 |
155-6034 Control Ar-Ride
| 10***03 | Clamp; (Half) | 4 |
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***52 | Elbow As. | 2 |
114-5173 Cooler Gp-Hydraulic Oil
| 11***73 | Cooler Group-Hydraulic Oil | 1 |
| 16***54 | Switch Group-Ride Control | 1 |
| 19***56 | Control & Lines Group-Ride | 1 |
164-0058 Cooler Gp-Hydraulic Oil
| 14***27 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 16***58 | Cooler Group-Hydraulic Oil | 1 |
173-8613 Cylinder Gp-Lift -Lh
| 10***22 | Ring-Backup | 1 |
| 13***16 | Rod As | 1 |
| 15***50 | Bearing | 2 |
168-6943 Cylinder Gp-Lift -Logging, Lh
| 13***16 | Rod As | 1 |
| 15***32 | Ring-Backup | 1 |
| 16***22 | Seal As-Buffer | 1 |
309-9546 Cylinder Gp-Lift
| 10***22 | Ring-Backup | 1 |
| 13***16 | Rod As | 1 |
| 15***50 | Bearing | 2 |
173-8612 Cylinder Gp-Lift -Rh
| 13***16 | Rod As | 1 |
| 15***32 | Ring-Backup | 1 |
| 16***22 | Seal As-Buffer | 1 |
309-9547 Cylinder Gp-Lift
| 13***16 | Rod As | 1 |
| 15***32 | Ring-Backup | 1 |
| 16***22 | Seal As-Buffer | 1 |
168-6942 Cylinder Gp-Lift -Logging, Rh
| 14***27 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 16***42 | Cylinder Group-Lift; -Logging, Rh | 1 |
168-6944 Cylinder Gp-Tilt
| 10***22 | Ring-Backup | 1 |
| 13***82 | Piston | 1 |
| 15***45 | Cylinder As | 1 |
152-1644 Cylinder Gp-Tilt -High Lift Machines
| 13***16 | Rod As | 1 |
| 15***44 | Cylinder Group-Tilt; -High Lift Machines | 1 |
| 15***50 | Bearing | 1 |
191-3468 Cylinder Gp-Tilt
| 15***39 | Bearing-Sleeve; (140.34mm Id) | 1 |
| 15***32 | Ring-Backup | 1 |
| 16***20 | Seal As-Buffer | 1 |
309-9545 Cylinder Gp-Tilt
| 10***22 | Ring-Backup | 1 |
| 13***82 | Piston | 1 |
| 15***46 | Rod As | 1 |
231-1955 Cylinder Gp-Tilt
| 15***39 | Bearing-Sleeve; (140.34mm Id) | 2 |
| 15***32 | Ring-Backup | 1 |
| 16***20 | Seal As-Buffer | 1 |
179-1557 Filter & Lines Gp-Hydraulic -Case Drain
| 14***60 | Elbow Group | 6 |
| 14***30 | Tee As | 2 |
| 15***26 | Union Assembly | 2 |
179-1561 Filter & Mtg Gp-Hydraulic -Case Drain
| 14***60 | Elbow Group | 6 |
| 14***30 | Tee As | 2 |
| 14***43 | Tee As-Orfs | 1 |
115-2129 Filter Gp-Oil -Steering, Implement, Pilot
| 09***96 | Spacer; (12x20x23-mm Thk) | 1 |
| 10***74 | Connector | 1 |
| 11***29 | Filter Group-Oil; -Steering, Implement, Pilot | 1 |
166-4647 Filter Gp-Oil -Case Drain
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***17 | Filter-Oil; (Ultra High Efficiency)(Hydraulic, Transmission) | 1 |
| 16***47 | Filter Group-Oil; -Axle Oil Clr, Systems Case Dr | 1 |
253-4787 Guard Gp-Tilt Cylinder
| 16***09 | Plug As-Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 25***87 | Guard Group-Tilt Cylinder | 1 |
114-5103 Hydraulic Ar
| 11***03 | Hydraulic Ar | 1 |
| 27***78 | Bracket As | 1 |
| 6W***31 | Spacer; (19.07x26.99x14-mm Thk) | 3 |
201-0837 Hydraulic Ar-2 Valve
| 13***34 | Lines Group-Hydraulic | 1 |
| 13***35 | Lines Group-Steering | 1 |
| 13***36 | Lines Group-Lift Cylinder | 1 |
201-0808 Hydraulic Ar-3 Valve
| 13***33 | Valve & Mtg Group-Main Control; -2-Function | 1 |
| 17***68 | Lines Group-Tilt Cylinder | 1 |
| 17***80 | Control Group-Electrohydraulic; -2-Function | 1 |
275-7837 Hydraulic Ar-Tilt Regeneration -Regeneration
| 25***13 | Lines Group-Pilot | 1 |
| 25***87 | Guard Group-Tilt Cylinder | 1 |
| 27***75 | Valve & Mtg Group-Regeneration | 1 |
275-7836 Hydraulic Ar-Tilt Regeneration
| 10***50 | Plate | 2 |
| 17***20 | Lines Group-Tilt Cylinder | 1 |
| 18***45 | Control Group-Electrohydraulic; -3-Function | 1 |
201-0377 Lines Gp-Front
| 10***03 | Clamp; (Half) | 8 |
| 17***30 | Tube As | 1 |
| 17***31 | Tube As | 1 |
172-8876 Lines Gp-Front
| 17***76 | Lines Group-Front | 1 |
| 25***13 | Lines Group-Pilot | 1 |
| 25***87 | Guard Group-Tilt Cylinder | 1 |
132-6134 Lines Gp-Hydraulic
| 11***29 | Filter Group-Oil; -Steering, Implement, Pilot | 1 |
| 11***45 | Hose As | 1 |
| 12***86 | Hose As | 1 |
132-6138 Lines Gp-Hydraulic Fan
| 11***29 | Filter Group-Oil; -Steering, Implement, Pilot | 1 |
| 11***45 | Hose As | 1 |
| 12***86 | Hose As | 1 |
174-4682 Lines Gp-Lift Cylinder
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 15***74 | Hose As | 2 |
| 15***75 | Hose As | 2 |
132-6136 Lines Gp-Lift Cylinder
| 08***56 | 90 Degrees Elbow | 1 |
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
251-3113 Lines Gp-Pilot
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 15***74 | Hose As | 2 |
| 15***75 | Hose As | 2 |
156-5519 Lines Gp-Tilt Cylinder -Cylinder Mounted
| 10***03 | Clamp; (Half) | 2 |
| 11***92 | Manifold | 1 |
| 15***19 | Lines Group-Tilt Cylinder; -Cylinder Mounted | 1 |
156-4801 Lines Gp-Tilt Cylinder
| 10***03 | Clamp; (Half) | 2 |
| 11***92 | Manifold | 1 |
| 15***01 | Lines Group-Tilt Cylinder | 1 |
174-3468 Lines Gp-Tilt Cylinder
| 10***03 | Clamp; (Half) | 2 |
| 11***92 | Manifold | 1 |
| 15***03 | U-Bolt | 1 |
330-4412 Lines Gp-Tilt Cylinder
| 10***50 | Plate | 1 |
| 1P***05 | Seal (Check Valve Outlet) | 4 |
| 1P***06 | Seal; 57.9mm(2.28in.)I.D. | 5 |
132-6137 Lines Gp-Tilt Cylinder
| 13***37 | Lines Group-Tilt Cylinder | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
174-3620 Lines Gp-Tilt Cylinder
| 10***03 | Clamp; (Half) | 6 |
| 15***42 | Bracket As | 1 |
| 15***81 | Manifold | 2 |
296-7785 Lines Gp-Tilt Cylinder
| 10***03 | Clamp; (Half) | 6 |
| 15***42 | Bracket As | 1 |
| 15***81 | Manifold | 2 |
139-6825 Motor Gp-Gear -Hydraulic Fan
| 10***50 | Plate | 1 |
| 13***25 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 1P***05 | Seal (Check Valve Outlet) | 4 |
194-3286 Plug Gp-Control Valve -Pressure, Flow Compensator-Steering Oil Pressure
| 03***36 | Seal-O-Ring | 2 |
| 19***86 | Plug Group-Control Valve; -Pressure, Flow Compensator-Steering-Steering Oil Pressure | 1 |
| 19***70 | Flange As | 1 |
170-6052 Pump & Mtg Gp-Hydraulic Fan -High Ambient Temperature
| 15***47 | Adapter Group | 1 |
| 15***67 | Pump Group-Piston; -Hydraulic Fan | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
170-6047 Pump & Mtg Gp-Hydraulic Fan
| 17***47 | Pump & Mtg Group-Hydraulic Fan | 1 |
| 18***67 | Seal-O-Ring | 1 |
| 19***49 | Retainer | 1 |
177-8924 Pump Gp-Gear -Pilot, Brake
| 15***47 | Adapter Group | 1 |
| 15***68 | Pump Group-Piston; -Hydraulic Fan, High Ambient Temp | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
152-7767 Pump Gp-Piston -Hydraulic Fan
| 09***95 | Pin, Dowel | 2 |
| 10***41 | Ring-Snap | 1 |
| 13***89 | Kit-Seal | 1 |
203-6069 Pump Gp-Piston -Implement
| 08***19 | Pin | 1 |
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
| 10***35 | Cone-Bearing | 1 |
152-7768 Pump Gp-Piston -Hyd Fan, High Ambient Temp
| 08***19 | Pin | 1 |
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
| 10***35 | Cone-Bearing | 1 |
205-3995 Pump Gp-Piston -Implement
189-9379 Rotating Gp-Pump -Hydraulic Fan
| 10***18 | Seal-O-Ring | 1 |
| 11***73 | Bearing-Special Roller | 2 |
| 11***70 | Ball | 1 |
132-6143 Tank & Mtg Gp-Hydraulic
| 09***15 | Ring-Retaining | 1 |
| 12***69 | Barrel | 1 |
| 13***43 | Tank & Mtg Group-Hydraulic | 1 |
153-3602 Tank Gp-Hydraulic
| 13***96 | Bracket As | 2 |
| 13***97 | Bracket As | 1 |
| 15***02 | Tank Group-Hydraulic | 2 |
137-1769 Valve & Mtg Gp-Main Control -3-Function, Logging
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***08 | Valve Group-Check; (Brake Accumulator) | 1 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
132-6133 Valve & Mtg Gp-Main Control -2-Function
| 12***58 | Bolt-Mounting; (1/2-20x1.75-In) | 2 |
| 13***33 | Valve & Mtg Group-Main Control; -2-Function | 1 |
| 13***09 | Cover As | 1 |
201-0218 Valve & Mtg Gp-Main Control -3-Function
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***08 | Valve Group-Check; (Brake Accumulator) | 1 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
253-4788 Valve & Mtg Gp-Regeneration -Tilt Cylinder
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***08 | Valve Group-Check; (Brake Accumulator) | 1 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
271-4575 Valve & Mtg Gp-Regeneration
| 27***71 | Support As | 1 |
| 27***75 | Valve & Mtg Group-Regeneration | 1 |
| 27***94 | Bracket As | 1 |
9t-3096 Valve Gp-Check
| 14***81 | Spacer; (13.5x25x12-mm Thk) | 6 |
| 27***65 | Support As | 1 |
| 27***92 | Bracket As | 1 |
200-8685 Valve Gp-Main Control -3-Function
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
| 10***31 | Stem | 1 |
| 10***56 | Valve; (Load Check) | 3 |
133-8611 Valve Gp-Main Control -2-Function
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
| 10***31 | Stem | 1 |
| 10***56 | Valve; (Load Check) | 2 |
133-8612 Valve Gp-Main Control -3-Function, Logging
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
| 10***31 | Stem | 1 |
| 10***56 | Valve; (Load Check) | 3 |
112-1817 Valve Gp-Manual -Lowering Control
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
| 10***31 | Stem | 1 |
| 10***56 | Valve; (Load Check) | 3 |
179-1900 Valve Gp-Pump Control -Pressure, Flow Compensator-Implement
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 17***00 | Valve Group-Pump Control; -Pressure, Flow Compensator-Implement | 1 |
| 20***71 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
205-3998 Valve Gp-Pump Control -Pressure, Flow Compensator-Implement
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 19***36 | Spring | 1 |
191-2929 Valve Gp-Pump Control -Pressure, Flow Compensator-Hydraulic Fan
| 09***75 | Pin, Roller | 1 |
| 09***81 | Plate, Slide | 1 |
| 10***60 | Spool-Torque | 1 |
273-2130 Valve Gp-Regeneration -Tilt Cylinder
| 09***75 | Pin, Roller | 1 |
| 09***81 | Plate, Slide | 1 |
| 10***60 | Spool-Torque | 1 |
172-5481 Valve Gp-Relief -Line
| 09***47 | Pin, Dowel | 2 |
| 14***86 | Spring | 1 |
| 17***81 | Valve Group-Relief; -Line | 1 |
186-6218 Valve Gp-Relief -Steering, Implement Pilot
| 11***75 | Ring-Backup (24.92mm Id) | 1 |
| 18***18 | Valve Group-Relief; -Steering, Implement Pilot | 1 |
| 2P***75 | Seal-O-Ring | 1 |
125-9349 Valve Gp-Relief -Line
| 03***13 | Seal-O-Ring | 1 |
| 11***75 | Ring-Backup (24.92mm Id) | 1 |
| 12***49 | Valve Group-Relief; -Line | 1 |
117-0159 Valve Gp-Relief -Main
| 11***59 | Valve Group-Relief; -Main, Lh/Fixed Displ Pump | 1 |
| 15***89 | Plug | 1 |
| 15***90 | Valve | 1 |
117-0160 Valve Gp-Relief -Line
| 11***60 | Valve Group-Relief; -Line | 1 |
| 18***76 | Dowel | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
117-0161 Valve Gp-Relief -Line
| 03***13 | Seal-O-Ring | 1 |
| 11***61 | Valve Group-Relief; -Line | 1 |
| 11***75 | Ring-Backup (24.92mm Id) | 1 |
143-8912 Valve Gp-Relief -Main
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 14***12 | Valve Group-Relief; -Right, Pump Backup | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
139-3544 Valve Gp-Relief -Steering, Implement Pilot
| 03***13 | Seal-O-Ring | 1 |
| 11***75 | Ring-Backup (24.92mm Id) | 1 |
| 13***44 | Valve Group-Relief; -Steering, Implement Pilot | 1 |
9t-9552 Valve Gp-Ride Control
| 13***15 | Manifold | 1 |
| 13***44 | Valve Group-Relief; -Steering, Implement Pilot | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
175-2791 Valve Gp-Shuttle
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 3 |
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 1 |
| 16***16 | Plug As | 1 |
151-7455 Valve Gp-Solenoid
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
122-4973 Valve Gp-Solenoid
| 12***73 | Valve Group-Solenoid | 1 |
| 20***29 | Retainer | 2 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 2 |
152-8340 Valve Gp-Solenoid
| 13***49 | Body | 1 |
| 14***10 | Valve Group-Solenoid; -Axle Oil Cooler-Hydraulic Lockout | 1 |
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 1 |
195-3739 Valve Gp-Solenoid -Pump Control
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 15***38 | Cartridge Assem. | 1 |
| 19***39 | Valve Group-Solenoid; -Pressure Reducing | 1 |
Implements
231-8177 Boom & Bearing As
| 15***28 | Bearing | 2 |
| 15***43 | Bearing | 2 |
| 15***49 | Bearing | 2 |
243-2751 Boom & Bearing As
| 14***95 | Plug As | 4 |
| 15***43 | Bearing | 2 |
| 15***52 | Spacer | 1 |
156-9351 Boom & Bearing As
| 15***51 | Boom & Bearing As | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 17***92 | Kit-Seal; (Solenoid Valve) | 1 |
194-6587 Boom & Bearing As
| 15***28 | Bearing | 2 |
| 15***43 | Bearing | 2 |
| 15***49 | Bearing | 2 |
189-7461 Boom Gp-Loader
| 10***50 | Plate | 4 |
| 15***43 | Bearing | 2 |
| 15***52 | Spacer | 1 |
201-1049 Boom Gp-Loader
| 16***50 | Stop-Dump | 2 |
| 18***59 | Linkage Group-Bucket | 1 |
| 20***49 | Boom Group-Loader | 1 |
114-5196 Control Gp-Bucket
| 10***50 | Plate | 4 |
| 11***96 | Control Group-Bucket | 1 |
| 23***77 | Boom & Bearing As | 1 |
225-2644 Hardware Gp-Boom
| 09***35 | Block | 1 |
| 15***06 | Block | 1 |
| 18***57 | Block | 1 |
189-7589 Hardware Gp-Boom
| 18***89 | Hardware Group-Boom | 1 |
| 19***79 | Linkage Group-Bucket | 2 |
189-7638 Linkage Gp-Bucket
| 11***58 | Plate | 1 |
| 15***35 | Bearing | 1 |
| 15***40 | Bearing | 1 |
197-0679 Linkage Gp-Bucket
| 10***44 | Boss; (M10x1.5x60-mm) | 1 |
| 15***35 | Bearing | 1 |
| 15***40 | Bearing | 1 |
189-7459 Linkage Gp-Bucket
| 18***59 | Linkage Group-Bucket | 1 |
| 2R***20 | Block | 1 |
| 8T***51 | Boss-Weld | 5 |
154-7531 Pin & Seal Gp-Linkage
| 15***35 | Bearing | 2 |
| 15***40 | Bearing | 2 |
| 15***39 | Link As; (Lh) | 1 |
Lubrication System
4n-2481 Fastener Gp-Oil Pump Mounting -Engine
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 16***95 | Tube As-Oil Filler | 1 |
167-7696 Filler Gp-Engine Oil
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
191-0966 Filter Gp-Engine Oil
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
171-6489 Fumes Disposal Gp
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 11***68 | Seal-O-Ring; (15.54mm Id) | 1 |
132-6249 Fumes Disposal Gp
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 10***25 | Seal-Cover | 1 |
| 13***49 | Fumes Disposal Group | 1 |
199-6348 Gauge Gp-Oil Level (Dipstick) -Engine
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
180-5568 Gauge Gp-Oil Level (Dipstick)
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 11***68 | Seal-O-Ring; (15.54mm Id) | 1 |
175-3862 Lines Gp-Engine Oil
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 10***44 | Elbow | 1 |
138-2770 Lines Gp-Turbocharger Oil
| 12***56 | Cover As-Pump | 1 |
| 13***70 | Lines Group-Turbocharger Oil | 1 |
| 1M***44 | Bolt; (3/8-16x2-1/4 In) | 2 |
161-4113 Pump Gp-Engine Oil
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
Machine Arrangement
114-5102 Chassis Ar
| 11***02 | Chassis Ar | 1 |
| 11***18 | Hitch Group-Articulating | 1 |
| 11***21 | Link Group-Steering Frame Lock | 1 |
114-5100 Common Ar
| 11***00 | Common Ar | 1 |
| 11***02 | Chassis Ar | 1 |
| 11***03 | Hydraulic Ar | 1 |
2q-8449 Conversion Ar-Machine
| 11***29 | Bumper Group-Rear | 1 |
| 11***94 | Wiring Group-Sensor; -Lift, Tilt Position | 1 |
| 11***96 | Control Group-Bucket | 1 |
2q-8448 Conversion Ar-Machine
| 11***29 | Bumper Group-Rear | 1 |
| 11***94 | Wiring Group-Sensor; -Lift, Tilt Position | 1 |
| 11***96 | Control Group-Bucket | 1 |
2q-8451 Conversion Ar-Machine -2-Valve
| 11***29 | Bumper Group-Rear | 1 |
| 11***94 | Wiring Group-Sensor; -Lift, Tilt Position | 1 |
| 11***96 | Control Group-Bucket | 1 |
2q-8450 Conversion Ar-Machine -3-Valve
| 11***29 | Bumper Group-Rear | 1 |
| 11***94 | Wiring Group-Sensor; -Lift, Tilt Position | 1 |
| 11***96 | Control Group-Bucket | 1 |
Operator Station
173-1028 Adjuster Gp-Seat
| 14***01 | Bolt; (M36x4x100-mm) | 4 |
| 15***30 | Plate | 2 |
| 15***32 | Plate-Seal | 4 |
237-3970 Air Compressor Gp-Seat
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
147-3120 Air Conditioner & Mounting Gp
| 14***20 | Air Conditioner & Mounting Group | 1 |
115-0627 Air Conditioner Gp
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 11***27 | Air Conditioner Group | 2 |
| 13***74 | Lines Group-Air Conditioner | 1 |
214-7635 Arm Gp-Window Wiper -Front
| 13***88 | Clip | 3 |
| 13***95 | Nozzle As-Washer | 1 |
| 19***21 | Bolt-Socket Head; (M6x1x25-mm) | 2 |
214-7634 Arm Gp-Window Wiper -Rear
| 06***93 | Grommet; (Rh) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
180-4001 Base Gp-Foot Brake -Pedal, Lh
| 12***31 | Cover | 1 |
| 14***61 | Kit-Roller; (Foot Brake Control)(Governor Pedal) | 1 |
| 14***63 | Screw | 2 |
180-4000 Base Gp-Foot Brake -Pedal, Rh
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
170-7118 Bracket Gp-Mounting
| 13***88 | Clip | 3 |
| 13***90 | Nozzle As-Washer | 1 |
| 17***18 | Bracket Group-Mounting | 1 |
2q-8483 Cab Ar
| 09***79 | Nut; (M36x4.0 Thd) | 1 |
| 17***17 | Bracket As | 1 |
| 2Q***83 | Cab Ar | 1 |
141-4643 Cab Ar
| 10***99 | Installation Group-Radio | 1 |
| 11***10 | Sealing Group-Glass | 1 |
| 13***25 | Panel Group-Instrument; -Lower | 1 |
218-0324 Compressor Gp-Refrigerant
| 21***24 | Compressor Group-Refrigerant | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
| 8T***33 | Nut (M10x1.50 Thd) | 2 |
172-1248 Compressor Gp-Refrigerant
| 10***96 | Wiper Group-Window | 1 |
| 10***99 | Installation Group-Radio | 1 |
| 11***10 | Sealing Group-Glass | 1 |
114-5172 Condenser Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***72 | Condenser Group-Refrigerant | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
183-5045 Control Gp-Electrohydraulic -3-Function
| 09***69 | Spacer; (7.5x12x12-mm Thk) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
179-9380 Control Gp-Electrohydraulic -2-Function
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
165-4077 Control Gp-Monitor -Payload
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 16***77 | Control Group-Monitor; -Payload | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
103-5526 Control Gp-Monitor -Backlight Dimmer
| 09***69 | Spacer; (7.5x12x12-mm Thk) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
141-4940 Control Gp-Steering -Stic
| 10***85 | Battery; (Lithium)(Internal Backup) | 1 |
| 12***90 | Cover; (Serv Repair) | 1 |
| 14***40 | Control Group-Steering; -Stic | 1 |
177-4113 Control Gp-Stic
| 17***13 | Control Group-Stic | 2 |
| 4E***20 | Base | 1 |
| 4E***27 | Housing | 1 |
4e-8413 Control Gp-Stic
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 1 |
| 13***07 | Elbow-45 Degree | 2 |
187-0738 Control Gp-Stic Lockout
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***29 | Actuator | 1 |
| 10***73 | Grip | 1 |
164-4237 Cover Gp-Dash
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 1 |
165-5576 Door Gp-Cab -Lh
| 12***84 | Film-Instruction; (Engine Run, On, Off) | 1 |
| 16***76 | Door Group-Cab; -Lh | 1 |
| 17***91 | Cover | 1 |
165-5725 Door Gp-Cab -Rh
| 11***54 | Handle Assem. | 1 |
| 12***67 | Glass | 1 |
| 12***68 | Glass | 1 |
178-4139 Door Gp-Storage
| 10***22 | Mount-Latch | 1 |
| 13***92 | Hinge | 3 |
| 16***22 | Door As | 1 |
165-6769 Duct & Filter Gp-Cab Air
| 11***03 | Door As | 1 |
| 11***51 | Hinge As | 2 |
| 16***69 | Duct & Filter Group-Cab Air | 1 |
165-6560 Duct Gp-Cab Air
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 10***66 | Filter Element-Cab Air; (Standard Efficiency) | 1 |
| 10***08 | Duct Assem. (R. H.) | 1 |
173-8466 Horn Gp-Electric
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 12 |
| 16***61 | Duct As-Air | 1 |
| 17***66 | Horn Group-Electric | 1 |
162-6884 Installation Gp-Controls
| 16***84 | Installation Group-Controls | 1 |
| 16***01 | Horn As; (24-Volt, Low Tone) | 2 |
| 17***75 | Horn As; (24-Volt, High Tone) | 2 |
109-8199 Installation Gp-Radio
| 01***60 | Grommet | 1 |
| 10***99 | Installation Group-Radio | 1 |
| 11***33 | Converter-Power; (24-Volt To 12-Volt) | 1 |
144-2617 Liner Gp-Cab
| 01***60 | Grommet | 1 |
| 12***84 | Cable Assem. | 1 |
| 13***22 | Plate | 1 |
131-1274 Lines Gp-Air Conditioner
| 03***67 | Bracket | 2 |
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
| 10***97 | Valve As; (Low Side) | 1 |
114-5142 Lines Gp-Air Conditioner
| 03***67 | Bracket | 1 |
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
| 10***97 | Valve As; (Low Side) | 1 |
162-5812 Lines Gp-Cab Heater
| 14***11 | Adapter Group | 1 |
| 15***21 | Adapter As | 1 |
| 16***12 | Lines Group-Cab Heater | 1 |
114-5141 Lines Gp-Cab Heater -Coolant
| 10***93 | Valve As | 1 |
| 10***94 | Gasket | 1 |
| 10***95 | Valve As | 1 |
115-1527 Mirror Gp-Rear View
| 11***27 | Mirror Group-Rear View | 1 |
| 13***41 | Gasket | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
166-3416 Mirror Gp-Rear View -Exterior, Rh
| 16***16 | Mirror Group-Rear View; -Exterior, Rh | 2 |
| 16***17 | Mirror Group-Rear View; -Exterior, Lh | 1 |
166-3417 Mirror Gp-Rear View -Exterior, Lh
| 15***81 | Bracket Assem. (R. H.) | 1 |
| 16***17 | Mirror Group-Rear View; -Exterior, Lh | 1 |
| 5P***79 | Mirror - Two Point Mount | 1 |
166-6928 Module Gp-Quad Gauge
| 15***82 | Bracket Assem. (L. H.) | 1 |
| 16***28 | Module Group-Quad Gauge; -Engine Coolant Temp, Transmission Oil Temp, Hydraulic Oil Temp, Fuel Level | 1 |
| 5P***79 | Mirror - Two Point Mount | 1 |
145-4230 Monitor Ar-Payload
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***30 | Monitor Ar-Payload | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 6 |
155-6649 Monitor Gp-Payload
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***19 | Bolt-Socket Head; (M4x0.7x25-mm) | 8 |
| 14***53 | Electronic Control Group | 1 |
155-5790 Motor Gp-Window Wiper -Front
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***90 | Motor Group-Window Wiper; -Front | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
155-5789 Motor Gp-Window Wiper -Rear
183-4007 Mounting Gp-Cab
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***07 | Mounting Group-Cab | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 5 |
114-5145 Operator Ar
| 11***45 | Operator Ar | 1 |
| 13***61 | Washer As | 4 |
| 13***62 | Mount | 8 |
292-6402 Pan Gp-Backrest -Lumbar
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***07 | Holder | 1 |
178-0604 Pan Gp-Backrest -Cloth
| 14***43 | Cab Ar | 1 |
| 16***84 | Installation Group-Controls | 1 |
| 17***04 | Pan Group-Backrest; -Cloth, Lumbar | 1 |
178-0605 Pan Gp-Backrest -Lumbar
| 16***83 | Knob-Lumbar | 1 |
| 17***05 | Pan Group-Backrest; -Lumbar | 2 |
| 23***45 | Cushion As; (Cloth) | 1 |
292-9237 Pan Gp-Backrest -Lumbar
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***07 | Holder | 1 |
136-2625 Panel Gp-Instrument -Lower
| 13***25 | Panel Group-Instrument; -Lower | 1 |
| 16***83 | Knob-Lumbar | 1 |
| 25***28 | Plug | 3 |
136-2626 Panel Gp-Instrument -Upper
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
141-4645 Pedal Gp-Governor
| 11***40 | Bracket | 1 |
| 12***76 | Plate As, Hydraulic System; Hydraulic System | 1 |
| 13***45 | Plate As | 1 |
130-8176 Pedal Gp-Governor
| 13***76 | Pedal Group-Governor | 2 |
| 13***70 | Gasket | 1 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 4 |
136-3357 Platform Gp
| 13***57 | Platform Group | 2 |
| 15***54 | Insulation | 1 |
| 15***55 | Insulation | 1 |
172-4387 Platform Gp-Cab
| 13***51 | Support As | 2 |
| 13***52 | Support As | 2 |
| 13***22 | Platform As; (Lh) | 1 |
114-5124 Platform Gp-Operator
| 11***24 | Platform Group-Operator | 1 |
| 11***51 | Hinge As | 2 |
| 13***21 | Platform As | 1 |
162-7599 Platform Gp-Operator
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 16***99 | Platform Group-Operator | 1 |
210-2270 Recliner Gp-Seat
| 10***57 | Washer; (22x76.2x6-mm Thk) | 8 |
| 13***86 | Film-Window; (Rear) | 1 |
| 17***18 | Roof | 1 |
194-3766 Roof Gp-Cab
| 10***00 | Glass; (Right Side, Rear) | 1 |
| 10***01 | Glass (Rear) | 1 |
| 10***02 | Glass; (Left Side, Rear) | 1 |
194-3715 Roof Gp-Cab
| 10***57 | Washer; (22x76.2x6-mm Thk) | 8 |
| 17***07 | Insulation; (Bottom) | 1 |
| 17***08 | Insulation; (Top) | 1 |
179-3710 Rops Gp-Enclosed
| 17***10 | Rops Group-Enclosed | 1 |
| 31***98 | Adhesive | 1 |
128-9664 Rops Gp-Enclosed
| 11***87 | Striker Assem.; (7/16-14) | 1 |
| 11***16 | Hinge | 1 |
| 12***52 | Pin | 1 |
117-1410 Sealing Gp-Glass
| 0T***44 | Bolt (1.25" Long) | 1 |
| 11***10 | Sealing Group-Glass | 1 |
| 20***88 | Bolt; (7/16-20) (44.5mml) | 1 |
222-0345 Seat Belt Gp -Retractable
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
178-0606 Seat Gp -Cloth
| 0T***44 | Bolt (1.25" Long) | 1 |
| 11***91 | Rod | 1 |
| 17***37 | Spacer; (11.7x19.8x20.3-mm Thk)(Lh Seat Side) | 1 |
178-0603 Seat Gp -Cloth
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
160-7188 Seat Gp-Suspension -Cloth, Air
| 09***49 | Bolt; (M8x1.25x40-mm) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
179-9575 Support Gp-Hydraulic Control
| 16***10 | Bolt; (M10x1.5x70-mm) | 4 |
| 17***79 | Bracket As; (Rh) | 1 |
| 17***83 | Bracket As; (Lh) | 1 |
173-1905 Support Gp-Seat
| 01***02 | Lockwasher | 1 |
| 09***58 | Screw-Machine; (M6x1x14-mm) | 1 |
| 09***47 | Nut-Thin; (M16x2 Thd) | 1 |
171-3897 Support Gp-Steering Control
| 16***80 | Plate | 1 |
| 17***97 | Support Group-Steering Control | 1 |
| 17***76 | Insulation As | 1 |
173-9375 Suppression Gp-Cab Sound
| 10***17 | Bumper | 4 |
| 12***57 | Shaft | 2 |
| 12***66 | Kit-Wiring Harness; (Air Suspension Seat) | 1 |
161-7539 Suspension Gp-Seat -Air
| 10***03 | Fastener | 26 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
191-2933 Suspension Gp-Seat -Air
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 12***71 | Visor Assem. | 1 |
| 19***33 | Suspension Group-Seat; -Air-Cloth | 1 |
131-2633 Visor Gp-Cab
| 13***33 | Visor Group-Cab | 1 |
| 20***21 | Strip As | 1 |
| 20***22 | Strip | 1 |
114-5127 Washer Gp-Window
| 11***27 | Washer Group-Window | 1 |
| 12***37 | Plate-Wiper | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
183-3756 Wiper Gp-Window
| 18***56 | Wiper Group-Window | 1 |
| 5P***61 | Bolt-Plow-Center Adapters To Bucket Edge | 12 |
| 5P***62 | Nut-Center Adapters To Bucket Edge | 14 |
109-8196 Wiper Gp-Window
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***96 | Wiper Group-Window | 1 |
| 12***37 | Plate-Wiper | 1 |
Power Train
137-8833 Axle Ar-Fixed -Front
| 12***55 | Lines Group-Service Brake; -Rear Axle | 1 |
| 13***33 | Axle Ar-Fixed; -Front | 1 |
| 13***34 | Axle Group-Oscillating; -Rear | 1 |
137-8832 Axle Ar-Oscillating -Rear
| 13***32 | Axle Ar-Oscillating; -Rear | 1 |
| 13***36 | Shaft-Axle | 2 |
| 17***84 | Bolt; (M24x3x100-mm) | 50 |
137-8862 Axle Gp-Fixed -Front
| 11***58 | Retainer-Bearing | 1 |
| 13***36 | Shaft-Axle | 2 |
| 13***62 | Axle Group-Fixed; -Front | 1 |
137-8834 Axle Gp-Oscillating -Rear
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 20 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 3 |
133-8114 Case & Parts Gp-Planetary
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 4 |
| 10***29 | Retainer | 1 |
| 10***30 | Gasket | 1 |
165-3621 Control Gp-Transmission Hyd
| 13***04 | Valve Group-Check; (Axle Oil Cooler Bypass) | 2 |
| 13***37 | Shroud As | 1 |
| 13***38 | Guard As | 1 |
150-3157 Cooler & Fan Gp-Axle Oil
| 13***04 | Valve Group-Check; (Axle Oil Cooler Bypass) | 2 |
| 13***37 | Shroud As | 1 |
| 13***38 | Guard As | 1 |
156-4259 Cooler Ar-Axle Oil
| 12***72 | Hose As | 1 |
| 13***02 | Hose As | 1 |
| 14***39 | Connector As. | 1 |
178-4629 Cooler Gp-Axle Oil
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 2 |
| 17***29 | Cooler Group-Axle Oil | 1 |
| 1A***22 | Bolt-Generator To Flywheel Housing | 7 |
139-1468 Cover Gp-Shipping
| 12***57 | Ring-Retaining | 1 |
| 12***82 | Cup-Roller Bearing; (236.38mm Id) | 1 |
| 13***92 | Seal-Lip Type | 1 |
137-8851 Differential & Bevel Gear Gp
| 13***51 | Differential & Bevel Gear Group | 1 |
| 13***59 | Case & Parts Group-Planetary | 1 |
| 13***91 | Pinion-Differential Bevel; (13-Teeth) | 4 |
137-8858 Differential Gp
| 13***58 | Differential Group | 1 |
| 14***74 | Gear-Side | 2 |
| 14***75 | Spider As | 1 |
146-7272 Differential Gp-Nospin
| 13***43 | Bolt; (M30x3.5x320-mm)(Front Axle Mtg) | 12 |
| 14***72 | Differential Group-Nospin | 1 |
| 17***92 | Bolt; (M30x3.5x220-mm)(Front Trunnion Support Mtg) | 4 |
146-7271 Differential Gp-Nospin
| 14***71 | Differential Group-Nospin | 2 |
146-4378 Differential Gp-Nospin
| 13***59 | Case & Parts Group-Planetary | 1 |
| 14***78 | Differential Group-Nospin | 2 |
| 5P***47 | Washer (Bracket To Valve Support) | 16 |
137-8865 Fastener Gp-Axle Mounting
| 13***65 | Fastener Group-Axle Mounting | 1 |
| 15***65 | Elbow; (Spl) | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
170-4042 Filter & Mtg Gp-Power Train
| 00***50 | Seal-O-Ring | 1 |
| 13***98 | Spring | 1 |
| 15***30 | Retainer | 1 |
183-6194 Filter Gp-Oil -Axle Oil Cooler
| 12***58 | Bolt-Mounting; (1/2-20x1.75-In) | 2 |
| 12***65 | Gauge-Liquid Level; (Power Train Oil) | 1 |
| 12***89 | Adapter | 2 |
170-3843 Filter Gp-Oil -Power Train
| 16***09 | Plug As-Hydraulic | 1 |
| 17***43 | Filter Group-Oil; -Power Train | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
139-9189 Gauge Gp-Sight -Power Train Oil
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 03***39 | Bolt-12 Point Head | 4 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 12 |
137-6228 Gear Gp-Input Transfer
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 03***39 | Bolt-12 Point Head | 4 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 12 |
187-8132 Gear Gp-Input Transfer
| 03***57 | Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer | 8 |
| 0L***28 | Bolt 10.16 mm(4 In.) Long | 2 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 11 |
133-8116 Gear Gp-Output Transfer
| 13***16 | Gear Group-Output Transfer | 1 |
| 13***21 | Tube As | 1 |
| 13***22 | Tube As | 1 |
114-5120 Lines Gp-Axle Oil Cooler -Rear
| 05***58 | "P" Clip | 1 |
| 11***20 | Lines Group-Axle Oil Cooler; -Rear | 1 |
| 13***21 | Tube As | 1 |
195-0456 Lines Gp-Axle Oil Cooler -Front
| 12***47 | Elbow | 1 |
| 14***72 | Block | 1 |
| 14***28 | Connector Assem. | 1 |
223-4078 Lines Gp-Axle Oil Cooler -Rear
| 10***84 | Tee-Face Seal | 1 |
| 14***29 | Tee As-Orfs | 1 |
| 1V***65 | Spacer; (0.493x0.675x1.19-In Thk) | 1 |
221-1164 Lines Gp-Axle Oil Cooler -Front
| 05***58 | "P" Clip | 1 |
| 13***21 | Tube As | 1 |
| 13***22 | Tube As | 1 |
266-3260 Lines Gp-Axle Oil Cooler
| 19***64 | Breather As; (Axle Vent) | 2 |
| 26***60 | Lines Group-Axle Oil Cooler | 1 |
| 2T***51 | Hose As-Lube | 1 |
193-8224 Lines Gp-Axle Vent
| 10***13 | Valve Group-Relief; -Torque Converter Outlet | 1 |
| 13***97 | Bracket As | 1 |
| 13***52 | Hose As | 1 |
196-4519 Lines Gp-Power Train Oil
| 10***13 | Valve Group-Relief; -Torque Converter Outlet | 1 |
| 10***65 | Tee As-Swivel | 1 |
| 11***01 | Spacer; (12x20x10-mm Thk) | 1 |
261-3857 Mounting Gp-Rim
| 26***57 | Mounting Group-Rim | 1 |
| 8T***75 | Bolt; (M16x2.0x45mm) | 11 |
| 9X***57 | Washer-Pipe As To Main Pump Suction Port | 11 |
114-5147 Mounting Gp-Torque Converter
| 0L***15 | Bolt 88.90 mm(3.50 In.) N.F. | 1 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 10 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 20 |
137-6225 Planetary Gp-Transmission
| 0L***15 | Bolt 88.90 mm(3.50 In.) N.F. | 1 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 10 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 20 |
192-2913 Planetary Gp-Transmission
| 11***47 | Mounting Group-Torque Converter | 1 |
| 13***22 | Shaft Group-Drive | 1 |
| 13***54 | Shaft Group-Input Drive | 1 |
114-5105 Power Train Ar
| 09***31 | Bolt; (Socket Head) (M10x1.5x120mm) | 1 |
| 11***05 | Power Train Ar | 1 |
| 13***23 | Cover As | 1 |
193-0980 Pump Gp-Transmission
| 13***28 | Cage-Bearing | 1 |
| 13***44 | Gear As | 1 |
| 13***45 | Gasket | 1 |
195-5979 Pump Gp-Transmission
| 19***79 | Pump Group-Transmission | 1 |
| 26***57 | Mounting Group-Rim | 1 |
| 26***57 | Rim Group-Demountable | 4 |
141-9811 Rim Ar
| 14***11 | Rim Ar | 1 |
| 14***90 | Valve As | 1 |
| 1J***46 | Seal-O-Ring | 1 |
262-1557 Rim Gp-Demountable
| 13***09 | Driver | 1 |
| 14***85 | Band-Bead Seat | 1 |
| 25***76 | Flange | 2 |
273-1639 Rim Gp-Demountable
| 11***27 | Bolt; (M20x2.5x90-mm) | 1 |
| 13***47 | Universal Joint Group | 1 |
| 13***49 | Universal Joint Group | 1 |
136-1722 Shaft Gp-Drive
| 13***22 | Shaft Group-Drive | 1 |
| 13***55 | Universal Joint Group; -Input Drive Shaft | 1 |
| 6V***23 | Bolt; (M12x1.75x60-mm) | 8 |
136-1754 Shaft Gp-Input Drive
| 10***33 | Spider & Bearing Group | 2 |
| 13***54 | Shaft Group-Input Drive | 1 |
| 20***44 | Shaft As | 1 |
201-7245 Slip Joint Gp
| 13***25 | Support As-Lower | 2 |
| 13***27 | Support As-Upper | 2 |
| 17***40 | Support As | 2 |
114-5138 Support Gp-Transmission
| 11***38 | Support Group-Transmission | 1 |
| 14***11 | Rim Ar | 1 |
200-5170 Tire & Rim Ar
| 14***11 | Rim Ar | 1 |
| 20***70 | Tire & Rim Ar | 1 |
200-5172 Tire & Rim Ar
| 14***11 | Rim Ar | 1 |
| 20***72 | Tire & Rim Ar | 1 |
168-8740 Tire & Rim Ar
| 14***11 | Rim Ar | 1 |
| 16***40 | Tire & Rim Ar | 1 |
| 8R***47 | Tire; (35/65-R33) | 4 |
200-5174 Tire & Rim Ar
| 14***11 | Rim Ar | 1 |
| 20***74 | Tire & Rim Ar | 1 |
| 20***51 | Tire; (35/65-R33) | 4 |
200-4170 Tire & Rim Ar
| 14***11 | Rim Ar | 1 |
| 20***70 | Tire & Rim Ar | 1 |
204-3547 Tire & Rim Ar
| 11***10 | Manifold | 1 |
| 12***82 | Torque Converter Group; -Freewheel Stator, Lockup | 1 |
| 13***93 | Cover | 1 |
200-5155 Tire & Rim Ar
| 12***52 | Tire; (35/65-33) | 4 |
| 14***11 | Rim Ar | 1 |
| 20***55 | Tire & Rim Ar | 1 |
200-7949 Tire & Rim Ar
| 14***11 | Rim Ar | 1 |
| 14***12 | Tire; (35/65-R33) | 4 |
| 20***49 | Tire & Rim Ar | 1 |
200-5171 Tire & Rim Ar
| 14***11 | Rim Ar | 1 |
| 20***71 | Tire & Rim Ar, Name-Plate; Ex. | 1 |
| 20***77 | Tire; (35/65-33) | 4 |
200-5169 Tire & Rim Ar
| 14***11 | Rim Ar | 1 |
| 20***69 | Tire & Rim Ar, Name-Plate; Ex. | 1 |
200-5165 Tire & Rim Ar
| 14***11 | Rim Ar | 1 |
| 20***65 | Tire & Rim Ar | 1 |
| 20***78 | Tire; (35/65-33) | 4 |
203-6992 Tire & Rim Ar
| 14***11 | Rim Ar | 1 |
| 20***92 | Tire & Rim Ar | 1 |
| 20***46 | Tire; (35/65-R33) | 4 |
170-1107 Tire & Rim Ar
| 14***11 | Rim Ar | 1 |
| 17***07 | Tire & Rim Ar | 1 |
| 19***21 | Tire; (35/65-R33) | 4 |
200-5161 Tire & Rim Ar
| 14***11 | Rim Ar | 1 |
| 20***61 | Tire & Rim Ar | 1 |
| 20***80 | Tire; (35/65-33) | 4 |
200-5156 Tire & Rim Ar
| 14***11 | Rim Ar | 1 |
| 20***56 | Tire & Rim Ar | 1 |
200-5160 Tire & Rim Ar
| 14***11 | Rim Ar | 1 |
| 20***60 | Tire & Rim Ar | 1 |
| 20***81 | Tire; (35/65-33) | 4 |
199-3722 Tire & Rim Ar
| 14***11 | Rim Ar | 1 |
| 19***22 | Tire & Rim Ar | 1 |
126-5483 Torque Converter & Housing Gp -Freewheel Stator, Lockup
| 12***83 | Cover | 1 |
| 12***83 | Torque Converter & Housing Group; -Freewheel Stator, Lockup | 1 |
| 12***02 | Torque Converter Group | 1 |
128-5303 Torque Converter & Housing Gp
| 10***69 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 12***03 | Torque Converter & Housing Group | 1 |
| 13***93 | Cover | 1 |
188-0670 Torque Converter & Housing Gp -Freewheel Stator, Lockup
| 10***69 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 13***93 | Cover | 1 |
147-1155 Torque Converter Ar
| 12***83 | Torque Converter & Housing Group; -Freewheel Stator, Lockup | 1 |
| 14***55 | Torque Converter Ar | 1 |
| 16***56 | Valve & Mtg Group-Lockup Clutch | 1 |
145-4225 Torque Converter Ar-Lockup
| 0L***61 | Pin-Dowel; (9.4mm X 22mm) | 2 |
| 10***41 | Carrier-Ring | 1 |
| 12***01 | Shaft-Output | 1 |
128-5302 Torque Converter Gp
| 0L***61 | Pin-Dowel; (9.4mm X 22mm) | 2 |
| 10***41 | Carrier-Ring | 1 |
| 12***01 | Shaft-Output | 1 |
188-0669 Torque Converter Gp -Freewheel Stator, Lockup
| 13***14 | Case & Parts Group-Planetary | 1 |
| 13***16 | Gear Group-Output Transfer | 1 |
| 13***25 | Planetary Group-Transmission | 1 |
126-5482 Torque Converter Gp -Freewheel Stator, Lockup
| 0L***61 | Pin-Dowel; (9.4mm X 22mm) | 2 |
| 10***41 | Carrier-Ring | 1 |
| 12***82 | Torque Converter Group; -Freewheel Stator, Lockup | 1 |
187-8133 Transmission Ar
| 13***14 | Case & Parts Group-Planetary | 1 |
| 13***16 | Gear Group-Output Transfer | 1 |
| 13***28 | Gear Group-Input Transfer | 1 |
192-2914 Transmission Ar
| 10***33 | Spider & Bearing Group | 1 |
| 13***48 | Shaft | 1 |
| 19***14 | Transmission Ar | 1 |
136-1747 Universal Joint Gp
| 10***33 | Spider & Bearing Group | 2 |
| 13***47 | Universal Joint Group | 1 |
| 13***50 | Shaft As | 1 |
136-1755 Universal Joint Gp -Input Drive Shaft
| 13***55 | Universal Joint Group; -Input Drive Shaft | 1 |
| 17***61 | Valve Group-Modulating; -Tc Lockup Clutch | 1 |
| 6D***89 | Seal-O-Ring | 1 |
136-1749 Universal Joint Gp
| 13***49 | Universal Joint Group | 1 |
| 13***56 | Shaft | 1 |
| 2T***13 | Spider & Bearing Group | 2 |
164-4856 Valve & Mtg Gp-Lockup Clutch
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***82 | Seal-O-Ring; (16.36mm Id) | 1 |
| 11***54 | Spool Assem. | 1 |
170-0761 Valve Gp-Modulating -Tc Lockup Clutch
| 14***44 | Coil Assem. | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 16***24 | Nut-Self-Locking; (1/2-28-Thd) | 1 |
216-5338 Valve Gp-Modulating -Transmission Clutch
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 21***38 | Valve Group-Modulating; -Torque Converter Lockup Clutch | 1 |
217-2708 Valve Gp-Modulating -Tc Impeller Clutch
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 10***14 | Body-Relief Valve | 1 |
| 1L***62 | Ring-Retaining | 1 |
216-5342 Valve Gp-Modulating -Torque Converter Lockup Clutch
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
| 18***10 | Washer | 1 |
129-6303 Valve Gp-Modulating -Tc Impeller Clutch
| 12***03 | Valve Group-Modulating; -Tc Impeller Clutch | 1 |
| 14***44 | Coil Assem. | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
129-6302 Valve Gp-Modulating -Tc Impeller Clutch
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***82 | Seal-O-Ring; (16.36mm Id) | 1 |
| 11***54 | Spool Assem. | 1 |
160-8408 Valve Gp-Modulating -Transmission Clutch
| 11***82 | Seal-O-Ring; (16.36mm Id) | 1 |
| 11***83 | Seal-O-Ring | 1 |
| 14***44 | Coil Assem. | 1 |
104-5013 Valve Gp-Relief -Torque Converter Outlet
| 10***13 | Valve Group-Relief; -Torque Converter Outlet | 1 |
| 10***12 | Spring | 1 |
| 10***69 | Stop | 1 |
134-5053 Valve Gp-Relief -Transmission Hydraulic Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***53 | Valve Group-Relief; -Transmission Hydraulic Control | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
149-2610 Valve Gp-Solenoid
| 14***10 | Valve Group-Solenoid; -Axle Oil Cooler-Hydraulic Lockout | 1 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 1 |
| 2M***41 | Slug | 1 |
8e-8427 Valve Gp-Torque Conv Priority
| 13***37 | Bushing | 1 |
| 13***43 | Gear-Ring; (81-Teeth) | 1 |
| 13***45 | Wheel | 1 |
192-0822 Wheel & Final Drive Gp
| 17***02 | Plate As | 1 |
| 17***88 | Plate As | 1 |
| 17***16 | Plate As | 1 |
Service Equipment And Supplies
9g-9288 Cap Gp-Protection -Hydraulic Tank
| 10***21 | Film-Identification; (Caterpillar)(Caterpillar)(Front) | 2 |
| 17***50 | Film-Stripe | 2 |
| 17***51 | Film-Identification; (Cat) | 2 |
1n-4296 Protection Gp-Vandalism
| 13***95 | Cable As | 1 |
| 17***91 | Cover As | 1 |
| 1N***96 | Vandalism Protection Group; Protection Gp-Vandalism | 1 |
170-3610 Film Gp
| 17***10 | Film Group | 1 |
115-5852 Plate & Film Gp -Engine Information
| 11***88 | Film; (Identification) (Fuel Filter) (On Secondary Fuel Filter) | 1 |
| 11***52 | Plate & Film Group; -Engine Information | 1 |
| 11***25 | Film-Identification; (Transmission Tank Fill Cap) | 1 |
170-3612 Plate & Film Gp
| 17***12 | Plate & Film Group | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 1 |
| 5P***02 | Padlock Group; (Includes: Battery Compartments, Platform Compartments, Radiator Access Door, Firewall Doors) | 1 |
139-9127 Plate & Film Gp
| 12***59 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 13***27 | Plate & Film Group | 1 |
| 16***01 | Film-Warning-Rops/Fops | 1 |
4c-8195 Tool Gp-Control Service
| 4C***95 | Tool Group-Control Service | 1 |
Steering System
132-6140 Cylinder & Mtg Gp-Steering
| 13***40 | Cylinder & Mtg Group-Steering | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 8M***05 | Adapter; (-8 Orb -8 Jic) (Brake Port) | 1 |
259-4737 Cylinder Gp-Steering -Rh
| 11***65 | Piston | 1 |
| 13***61 | Bearing | 2 |
| 16***01 | Seal As-Buffer | 1 |
259-4733 Cylinder Gp-Steering -Lh
| 09***49 | Washer; (22x60x6-mm Thk) | 4 |
| 13***70 | Pin As | 4 |
| 25***33 | Cylinder Group-Steering; -Lh | 2 |
167-4322 Guard Gp-Steering Cylinder
| 11***65 | Piston | 1 |
| 13***61 | Bearing | 2 |
| 16***01 | Seal As-Buffer | 1 |
132-6144 Lines Gp-Secondary Steering
| 13***44 | Lines Group-Secondary Steering | 1 |
| 16***58 | Bracket As; (Rh) | 2 |
| 16***59 | Bracket As; (Lh) | 2 |
132-6135 Lines Gp-Steering
| 10***50 | Clamp | 2 |
| 12***67 | Strip Assem. | 1 |
| 13***35 | Lines Group-Steering | 1 |
132-6142 Lines Gp-Steering Neutralizer
| 10***50 | Clamp | 2 |
| 12***67 | Strip Assem. | 1 |
| 13***42 | Lines Group-Steering Neutralizer | 1 |
150-7585 Pump Gp-Gear -Secondary Steering
| 10***08 | Valve Group-Check; (Brake Accumulator) | 1 |
| 11***98 | Angle As | 1 |
| 11***31 | Junction Block | 1 |
153-9624 Pump Gp-Piston -Steering
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 07***90 | Seal | 4 |
176-7509 Rotating Gp-Pump -Steering
| 09***42 | Ring-Retaining | 1 |
| 10***14 | Seal-O-Ring | 1 |
| 12***94 | Plug; (Break Off) | 1 |
151-2384 Steering Ar
| 09***39 | Ring; (Retaining) | 1 |
| 15***84 | Steering Ar | 1 |
| 19***85 | Plate-Distributor | 1 |
176-9369 Valve Gp-Check -Steering
| 17***69 | Valve Group-Check; -Steering | 3 |
| 17***70 | Valve Group-Check; -Steering | 2 |
176-9370 Valve Gp-Check -Steering
| 16***54 | Seal-O-Ring | 1 |
| 17***70 | Valve Group-Check; -Steering | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
149-4617 Valve Gp-Check -Steering Quad
| 14***17 | Valve Group-Check; -Steering Quad | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 30***99 | Valve Group-Steering | 1 |
249-5615 Valve Gp-Pilot -Stic Steering
| 16***54 | Seal-O-Ring | 1 |
| 24***15 | Valve Group-Pilot; -Stic Steering | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
147-1238 Valve Gp-Pilot Cartridge
| 10***07 | Spring | 1 |
| 10***10 | Plunger | 1 |
| 14***38 | Valve Group-Pilot Cartridge; -Steering | 1 |
147-1237 Valve Gp-Pilot Cartridge
| 10***19 | Shim; (0.762-mm Thk) | 2 |
| 10***55 | Handle | 1 |
| 10***56 | Bracket | 1 |
176-7520 Valve Gp-Pump Control -Pressure Compensator-Steering
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 10***18 | Shim; (.020in Thk) | 1 |
| 10***19 | Shim; (0.762-mm Thk) | 1 |
6e-6188 Valve Gp-Relief -Pump Backup
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6E***53 | Kit-Seal; (Relief Valve) | 1 |
| 6E***88 | Valve Group-Relief; -Pump Backup-Line | 1 |
6e-3986 Valve Gp-Relief -Secondary Steering
| 19***07 | Kit-Valve Repair; (Pressure Compensator Valve) | 1 |
| 19***85 | Retainer | 1 |
| 19***86 | Plug Group-Control Valve; -Pressure, Flow Compensator-Steering-Steering Oil Pressure | 1 |
6e-5566 Valve Gp-Selector & Press Cont -Secondary Steering
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4J***22 | Seal-Interface Between 3rd & Tilt Valve | 1 |
| 4T***70 | Spring | 1 |
4t-1860 Valve Gp-Shuttle
| 10***66 | Adapter | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 4T***60 | Valve Group-Shuttle; -Ripper Lift-Ripper Tilt-Blade Tilt-Blade Lift | 1 |
133-8609 Valve Gp-Steering -With Secondary Steering
| 13***09 | Valve Group-Steering; -With Secondary Steering | 1 |
| 14***03 | Seal-O-Ring | 1 |
| 14***04 | Ring-Backup | 2 |
301-4599 Valve Gp-Steering
| 1P***79 | Flange (Half) | 2 |
| 1P***67 | Flange-Half (43.31 mm Id) | 2 |
| 1T***36 | Plug; (Pipe) (1/16-27 Thd) | 2 |
146-7571 Valve Gp-Steering Neutralizer
| 14***71 | Valve Group-Steering Neutralizer; -Stic Steering | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 14***09 | Plug As-Sto | 3 |
Work Tools
9w-1377 Adapter Gp-Tip
| 18***05 | Adapter-Tip; (Center) | 6 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 4 |
| 5P***61 | Bolt-Plow-Center Adapters To Bucket Edge | 14 |
174-4117 Adapter Gp-Tip
| 17***17 | Adapter Group-Tip | 1 |
140-6773 Adapter-Tip
| 14***73 | Adapter-Tip | 1 |
152-0050 Adapter-Tip -Two Strap
| 15***50 | Adapter-Tip; -Two Strap | 1 |
140-6774 Adapter-Tip
| 14***74 | Adapter-Tip | 1 |
152-0051 Adapter-Tip -Two Strap
| 15***51 | Adapter-Tip; -Two Strap | 1 |
152-0052 Adapter-Tip -Two Strap
| 15***52 | Adapter-Tip; -Two Strap | 1 |
174-7184 Adapter-Tip -Two Strap
| 17***84 | Adapter-Tip; -Two Strap | 1 |
140-6772 Adapter-Tip
| 14***72 | Adapter-Tip | 1 |
174-7185 Adapter-Tip -Two Strap
| 13***42 | Plate-Wear; (Lh) | 1 |
| 13***95 | Plate-Wear; (Rh) | 1 |
| 13***05 | Plate-Wear | 1 |
174-7183 Adapter-Tip -Two Strap
| 17***83 | Adapter-Tip; -Two Strap | 1 |
175-1457 Bucket As-General Purpose
| 11***23 | Plate; (Rh) | 1 |
| 11***24 | Plate; (Lh) | 1 |
| 11***64 | Adapter; (2-Strap, Center) | 2 |
240-7986 Bucket As-Rock
| 14***15 | Edge-Cutting | 1 |
| 21***29 | Hinge As; (Outer, Lh) | 1 |
| 21***30 | Hinge As; (Outer, Rh) | 1 |
240-0278 Bucket As-Rock
| 13***62 | Lug-Mounting | 5 |
| 18***82 | Edge As-Base | 1 |
| 18***94 | Adapter-Tip | 6 |
175-1461 Bucket As-Rock
| 11***64 | Adapter; (2-Strap, Center) | 8 |
| 13***42 | Plate-Wear; (Lh) | 1 |
| 13***95 | Plate-Wear; (Rh) | 1 |
156-1033 Bucket As-Rock
| 11***23 | Plate; (Rh) | 1 |
| 11***24 | Plate; (Lh) | 1 |
| 11***64 | Adapter; (2-Strap, Center) | 8 |
240-9089 Bucket As-Rock
| 16***14 | Stop Group-Dump | 2 |
| 16***23 | Rubber | 1 |
| 17***56 | Bucket As | 1 |
175-1451 Bucket As-Rock
| 11***64 | Adapter; (2-Strap, Center) | 8 |
| 13***03 | Plate-Wear | 1 |
| 13***04 | Plate-Wear | 7 |
175-1453 Bucket As-Rock
| 11***64 | Adapter; (2-Strap, Center) | 8 |
| 13***42 | Plate-Wear; (Lh) | 1 |
| 13***95 | Plate-Wear; (Rh) | 1 |
148-7388 Bucket As-Rock
| 11***23 | Plate; (Rh) | 1 |
| 11***24 | Plate; (Lh) | 1 |
| 11***64 | Adapter; (2-Strap, Center) | 8 |
156-6381 Bucket As-Rock
| 11***23 | Plate; (Rh) | 1 |
| 11***24 | Plate; (Lh) | 1 |
| 13***42 | Plate-Wear; (Lh) | 1 |
175-1455 Bucket As-Rock
| 10***54 | Adapter-Tip; (2-Strap, Center)(Two Strap-Center) | 1 |
| 10***55 | Adapter-Tip; (2-Strap, Rh)(Two Strap-Rh) | 2 |
| 10***56 | Adapter-Tip; (2-Strap, Lh)(Two Strap-Lh) | 2 |
166-5882 Bucket As-Rock
| 13***42 | Plate-Wear; (Lh) | 1 |
| 13***75 | Edge As | 1 |
| 13***95 | Plate-Wear; (Rh) | 1 |
175-1463 Bucket As-Rock
| 11***64 | Adapter; (2-Strap, Center) | 8 |
| 17***63 | Bucket As-Rock | 1 |
| 21***29 | Hinge As; (Outer, Lh) | 1 |
175-1459 Bucket As-Rock
| 13***42 | Plate-Wear; (Lh) | 1 |
| 13***62 | Lug-Mounting | 5 |
| 13***95 | Plate-Wear; (Rh) | 1 |
239-0239 Bucket As-Rock
| 21***29 | Hinge As; (Outer, Lh) | 1 |
| 21***30 | Hinge As; (Outer, Rh) | 1 |
| 22***82 | Bar | 4 |
171-4057 Bucket Gp-General Purpose
| 17***57 | Bucket Group-General Purpose | 1 |
| 17***57 | Bucket As-General Purpose | 1 |
| 18***66 | Stop | 2 |
175-1456 Bucket Gp-General Purpose
| 14***88 | Bucket As-Rock | 1 |
| 16***14 | Stop Group-Dump | 2 |
| 17***56 | Bucket Group-General Purpose | 1 |
163-9403 Bucket Gp-Rock
| 15***33 | Bucket As-Rock | 1 |
| 16***14 | Stop Group-Dump | 2 |
| 16***03 | Bucket Group-Rock | 1 |
175-1454 Bucket Gp-Rock
| 10***12 | Protector Group-Side Bar | 2 |
| 17***54 | Bucket Group-Rock | 1 |
| 17***59 | Bucket As-Rock | 1 |
175-1462 Bucket Gp-Rock
| 17***62 | Bucket Group-Rock | 1 |
| 18***66 | Stop | 2 |
| 20***96 | Bucket As-Rock | 1 |
240-0277 Bucket Gp-Rock
| 10***12 | Protector Group-Side Bar | 2 |
| 10***78 | Pin-G.E.T.; (Extreme Service) | 6 |
| 10***59 | Retainer As.-Ground Engaging Tool | 6 |
240-9090 Bucket Gp-Rock
| 10***59 | Retainer As.-Ground Engaging Tool | 6 |
| 13***63 | Cover-Adapter | 4 |
| 13***64 | Cover-Adapter | 2 |
175-1458 Bucket Gp-Rock
| 10***12 | Protector Group-Side Bar | 2 |
| 10***78 | Pin-G.E.T.; (Extreme Service) | 6 |
| 10***59 | Retainer As.-Ground Engaging Tool | 6 |
175-1452 Bucket Gp-Rock
| 17***52 | Bucket Group-Rock | 1 |
| 17***55 | Bucket As-Rock | 1 |
| 18***66 | Stop | 2 |
163-9402 Bucket Gp-Rock
| 15***81 | Bucket As-Rock | 1 |
| 16***14 | Stop Group-Dump | 2 |
| 16***02 | Bucket Group-Rock | 1 |
175-1450 Bucket Gp-Rock
| 17***50 | Bucket Group-Rock | 1 |
| 17***53 | Bucket As-Rock | 1 |
| 18***66 | Stop | 2 |
175-1460 Bucket Gp-Rock
| 17***60 | Bucket Group-Rock | 1 |
| 17***63 | Bucket As-Rock | 1 |
| 18***66 | Stop | 2 |
240-7987 Bucket Gp-Rock
| 24***87 | Bucket Group-Rock | 1 |
| 24***89 | Bucket As-Rock | 1 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 28 |
202-2795 Bucket Gp-Rock
| 10***12 | Protector Group-Side Bar | 2 |
| 10***75 | Edge-Segment; (Center) | 2 |
| 10***76 | Edge-Segment; (Rh) | 2 |
163-9404 Bucket Gp-Rock
| 16***14 | Stop Group-Dump | 2 |
| 16***04 | Bucket Group-Rock | 1 |
| 16***82 | Bucket As-Rock | 1 |
166-5881 Bucket Gp-Rock
| 16***81 | Bucket Group-Rock | 1 |
| 17***51 | Bucket As-Rock | 1 |
| 18***66 | Stop | 2 |
164-8386 Cover Gp-Adapter
| 13***54 | Adapter-Center | 4 |
| 13***56 | Adapter-Corner | 2 |
| 13***62 | Lug-Mounting | 5 |
246-2743 Edge As-Base
| 13***30 | Base-Wear Plate | 5 |
| 23***38 | Adapter-Tip; -Center, K-130 | 5 |
| 23***39 | Adapter-Tip; -Corner | 2 |
257-1833 Edge As-Base
| 13***62 | Lug-Mounting | 5 |
| 23***38 | Adapter-Tip; -Center, K-130 | 4 |
| 23***39 | Adapter-Tip; -Corner | 2 |
253-9582 Edge As-Base -High Abrasion
| 22***34 | Adapter-Tip; (K-130, 2-Strap, Center) | 1 |
| 22***35 | Adapter-Tip; (K-130, 2-Strap, Rh) | 3 |
| 22***36 | Adapter-Tip; (K-130, 2-Strap, Lh) | 3 |
208-5336 Edge As-Base
| 20***36 | Edge As-Base | 1 |
| 31***14 | Adapter-Tip; (K-110, 2-Strap, Center) | 2 |
| 31***15 | Adapter-Tip; (K-110, 2-Strap, Rh) | 3 |
135-9560 Edge As-Base
| 13***54 | Adapter-Center | 4 |
| 13***56 | Adapter-Corner | 2 |
| 13***60 | Edge As-Base | 1 |
275-6048 Edge As-Base
| 10***41 | Edge-Cutting | 2 |
| 1U***61 | Edge ( End ) | 2 |
| 27***48 | Edge As-Base | 1 |
172-9217 Edge As-Base
| 11***64 | Adapter; (2-Strap, Center) | 8 |
| 17***17 | Edge As-Base | 1 |
104-4369 Edge Gp-Bit & Cutting
| 10***69 | Edge Group-Bit & Cutting | 1 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 21 |
| 5P***23 | Bolt-Plow-Corner Adapters To Bucket | 21 |
208-8841 Edge Gp-Cutting
| 13***54 | Adapter-Tip | 2 |
| 13***55 | Adapter-Tip | 3 |
| 13***56 | Adapter-Tip | 3 |
264-2109 Edge Gp-Cutting
| 10***45 | Cover | 7 |
| 26***09 | Edge Group-Cutting | 1 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 21 |
208-8840 Edge Gp-Cutting
| 10***94 | Edge-Cutting-Lh | 1 |
| 10***95 | Edge-Cutting-Lh | 1 |
| 10***96 | Edge-Cutting | 1 |
183-5321 Edge Gp-Cutting
| 18***21 | Edge Group-Cutting | 1 |
| 1U***71 | Plate As-Rh | 2 |
| 20***60 | Edge-Segment | 2 |
132-1071 Edge Gp-Cutting
| 13***71 | Edge Group-Cutting | 1 |
| 18***25 | Edge-Cutting | 2 |
| 1U***61 | Edge ( End ) | 2 |
183-5318 Edge Gp-Cutting
| 18***18 | Edge Group-Cutting | 1 |
| 18***24 | Edge-Segment | 7 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 14 |
208-5262 Edge Gp-Cutting
| 20***62 | Edge Group-Cutting | 1 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 28 |
| 6V***35 | Bolt-Plow; (1-1/4-7x3.74-In) | 28 |
4t-7179 Edge Gp-Cutting
| 12***34 | Edge (End) (R.H.) | 1 |
| 12***35 | Edge (End) (L.H.) | 1 |
| 13***69 | Edge-Cutting | 1 |
109-3123 Edge Gp-Segment
| 10***35 | Edge-Segment | 1 |
| 10***36 | Edge-Segment-Rh | 3 |
| 10***37 | Edge-Segment-Lh | 3 |
109-9051 Edge Gp-Segment
| 10***51 | Edge Group-Segment | 1 |
| 10***80 | Edge-Segment; (Center) | 1 |
| 10***81 | Edge-Segment; (Lh) | 3 |
119-3230 Edge Gp-Segment
| 10***80 | Edge-Segment; (Center) | 1 |
| 10***81 | Edge-Segment; (Lh) | 3 |
| 10***82 | Edge-Segment; (Rh) | 3 |
124-6346 Edge Gp-Segment
| 12***46 | Edge Group-Segment | 1 |
104-4400 Edge Gp-Segment
| 10***00 | Edge Group-Segment | 1 |
| 10***90 | Segment Edge | 1 |
| 10***91 | Segment Edge; (Rh) | 3 |
107-3545 Edge Gp-Segment
| 10***45 | Edge Group-Segment | 1 |
| 11***60 | Edge-Segment | 1 |
| 11***61 | Segment Edge; (Lh) | 3 |
107-3533 Edge Gp-Segment
| 10***33 | Edge Group-Segment | 1 |
| 10***36 | Edge-Segment | 7 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 21 |
8e-9898 Edge Gp-Segment
| 13***40 | Edge-Segment | 7 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 14 |
| 5P***23 | Bolt-Plow-Corner Adapters To Bucket | 14 |
107-3498 Edge Gp-Segment
| 10***98 | Edge Group-Segment | 1 |
| 10***36 | Edge-Segment | 1 |
| 10***37 | Edge-Segment | 3 |
275-5980 Edge-Cutting
| 27***80 | Edge-Cutting | 1 |
275-5925 Edge-Cutting -Lh
| 27***25 | Edge-Cutting; -Lh | 1 |
232-0142 Edge-Cutting
| 23***42 | Edge-Cutting | 1 |
286-2084 Edge-Cutting -Base
| 28***84 | Edge-Cutting; -Base | 1 |
275-5926 Edge-Cutting
| 27***26 | Edge-Cutting | 1 |
275-5924 Edge-Cutting -Rh
| 27***24 | Edge-Cutting; -Rh | 1 |
195-5079 Edge-Segment
| 19***79 | Edge-Segment | 1 |
| 25***66 | Guard-Bucket Corner; (Rh) | 1 |
| 25***67 | Guard-Bucket Corner; (Lh) | 1 |
174-7950 Guard Gp-Bucket Corner
| 17***50 | Guard Group-Bucket Corner | 1 |
236-8219 Plate As-Wear -Rh
| 23***19 | Plate As-Wear; -Rh | 1 |
236-8221 Plate As-Wear -Center
| 23***21 | Plate As-Wear; -Center | 1 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 12 |
| 4J***58 | Bolt--Per Change 1 To 7j***85 | 12 |
236-8220 Plate As-Wear -Lh
| 23***20 | Plate As-Wear; -Lh | 1 |
217-4630 Plate Gp-Wear -Center
| 19***81 | Plate-Wear; (Rh) | 1 |
| 21***30 | Plate Group-Wear; -Center | 1 |
| 5P***61 | Bolt-Plow-Center Adapters To Bucket Edge | 3 |
164-8387 Plate Gp-Wear
| 16***87 | Plate Group-Wear | 1 |
| 19***80 | Plate; (Center) | 1 |
| 5P***61 | Bolt-Plow-Center Adapters To Bucket Edge | 3 |
217-4632 Plate Gp-Wear -Lh
| 21***32 | Plate Group-Wear; -Lh | 1 |
217-4631 Plate Gp-Wear -Rh
| 19***82 | Plate-Wear; (Lh) | 1 |
| 21***31 | Plate Group-Wear; -Rh | 1 |
| 5P***61 | Bolt-Plow-Center Adapters To Bucket Edge | 3 |
275-5944 Plate-Wear -Lh
| 27***44 | Plate-Wear; -Lh | 1 |
275-5945 Plate-Wear -Center
| 13***67 | Protector-Edge | 2 |
| 13***68 | Protector-Edge | 2 |
| 13***70 | Protector-Edge; (Center) | 1 |
275-5943 Plate-Wear -Rh
| 27***43 | Plate-Wear; -Rh | 1 |
195-7142 Protector Gp-Edge
| 10***78 | Pin-G.E.T.; (Extreme Service) | 7 |
| 10***59 | Retainer As.-Ground Engaging Tool | 7 |
| 10***80 | Edge-Segment; (Center) | 2 |
174-4847 Protector Gp-Edge
| 17***47 | Protector Group-Edge | 1 |
| 19***80 | Plate; (Center) | 1 |
| 19***81 | Plate-Wear; (Rh) | 3 |
164-8385 Protector Gp-Edge
| 13***70 | Protector-Edge; (Center) | 1 |
| 13***71 | Pin | 10 |
| 16***85 | Protector Group-Edge | 1 |
195-7141 Protector Gp-Edge
| 19***41 | Protector Group-Edge | 1 |
| 19***80 | Plate; (Center) | 7 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 21 |
253-0188 Protector Gp-Edge
| 10***59 | Retainer As.-Ground Engaging Tool | 4 |
| 13***38 | Pin-G.E.T. | 4 |
| 1U***40 | Bit-Router | 2 |
106-0912 Protector Gp-Side Bar
| 10***12 | Protector Group-Side Bar | 1 |
| 13***06 | Retainer-G.E.T. | 1 |
| 13***20 | Base | 1 |
101-3083 Protector Gp-Side Bar
| 10***83 | Protector Group-Sidebar | 1 |
| 11***59 | Retainer Assembly; (G.E.T.) | 4 |
| 13***50 | Pin; (G.E.T.) | 4 |
140-6850 Protector Gp-Wear
| 13***07 | Retainer-G.E.T. | 1 |
| 13***50 | Base-Wear Plate | 1 |
| 13***53 | Cover | 1 |
140-6830 Protector Gp-Wear
| 13***06 | Retainer-G.E.T. | 1 |
| 13***30 | Base-Wear Plate | 1 |
| 13***33 | Plate-Wear | 1 |
140-6820 Protector Gp-Wear
| 13***06 | Retainer-G.E.T. | 1 |
| 13***20 | Base | 1 |
| 13***23 | Cover | 1 |
140-6821 Protector Gp-Wear
| 13***06 | Retainer-G.E.T. | 1 |
| 13***30 | Base-Wear Plate | 1 |
| 13***32 | Plate-Wear | 1 |
140-6840 Protector Gp-Wear
| 13***07 | Retainer-G.E.T. | 1 |
| 13***40 | Base | 1 |
| 13***43 | Cover | 1 |
140-6831 Protector Gp-Wear
| 13***07 | Retainer-G.E.T. | 1 |
| 13***40 | Base | 1 |
| 13***42 | Cover | 1 |
140-6851 Protector Gp-Wear
| 10***78 | Pin-G.E.T.; (Extreme Service) | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
| 14***51 | Protector Group-Wear | 1 |
140-6841 Protector Gp-Wear
| 13***07 | Retainer-G.E.T. | 1 |
| 13***50 | Base-Wear Plate | 1 |
| 13***52 | Base-Wear Plate | 1 |
4t-5222 Tip Gp-Short
| 10***78 | Pin-G.E.T.; (Extreme Service) | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
| 4T***22 | Tip Group | 1 |
4t-5223 Tip Gp-Long
| 4T***23 | Tip Group | 1 |
| 6Y***73 | Tip Group-Long; -J-550, Heavy-Duty | 8 |
8e-3759 Tip Gp-Abrasion
| 8E***59 | Tip Group-Abrasion; -J-550 | 1 |
| 8J***42 | Tip Group-Long; -J-550, Heavy-Duty | 8 |
6y-5373 Tip Gp-Long
| 10***78 | Pin-G.E.T.; (Extreme Service) | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
| 6Y***73 | Tip Group-Long; -J-550, Heavy-Duty | 1 |
9n-4599 Tip Gp-Long
| 13***00 | Retainer | 1 |
| 13***10 | Cap-Retainer | 1 |
| 14***82 | Plug-Retainer | 1 |
9n-4563 Tip Gp-Long
| 9N***63 | Tip Group-Long; -J-450, Heavy-Duty | 9 |
6y-4217 Tip Gp-Long
| 10***78 | Pin-G.E.T.; (Extreme Service) | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
| 6Y***17 | Tip Group-Long | 1 |
8j-9842 Tip Gp-Long
| 10***69 | Retainer As-G.E.T. | 1 |
| 11***68 | Pin-G.E.T. | 1 |
| 8J***42 | Tip Group-Long; -J-550, Heavy-Duty | 1 |
170-7295 Tip Gp-Penetration
| 10***78 | Pin-G.E.T.; (Extreme Service) | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
| 13***52 | Tip-Penetration | 1 |
170-7296 Tip Gp-Penetration
| 17***96 | Tip Group-Penetration | 1 |
| 8J***41 | Tip Group-Short; -J-550 | 8 |
170-1870 Tip Gp-Penetration
| 10***69 | Retainer As-G.E.T. | 1 |
| 11***68 | Pin-G.E.T. | 1 |
| 13***51 | Tip-Penetration | 1 |
8j-9841 Tip Gp-Short
| 8J***41 | Tip Group-Short; -J-550 | 1 |
138-0906 Tip-Abrasion
| 13***06 | Tip-Abrasion | 1 |
140-6775 Tip-Penetration
| 14***75 | Tip-Penetration | 1 |
143-3092 Tip-Penetration
| 14***92 | Tip-Penetration | 1 |
138-6553 Tip-Short
| 13***53 | Tip-Short | 1 |
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
988G serial number reference
The PIN/serial plate on a 988G is riveted to the main frame on the left-hand (low step/highway) side of the machine, behind the front tire and ahead of the articulation hitch. Read the first three characters as the model/build-series prefix (e.g. 2TW, BNH) and the remaining digits as the sequential unit number following that prefix (shown as prefixNNNNN, or "prefix00001-UP" in parts literature). On the full 17-character PIN format used from 2001 onward, this same 3-character block sits in the middle of the string right after the CAT plant/world manufacturer code.
| Prefix | Identifies | Notes |
|---|---|---|
| 2TW | 988G Wheel Loader, 3456 engine | 2TW00001 and up. Early-production 988G run, built in the United States, roughly 1999 through 2002. Powered by the Cat 3456 diesel engine. Covers standard bucket and logging-boom hydraulic configurations under the same prefix block. |
| BNH | 988G Wheel Loader, 3456 engine | BNH00001 and up. Later-production 988G run, built in the United States, roughly 2001 through 2005, running up to the changeover to the 988H. Powered by the Cat 3456 diesel engine, same engine family as the 2TW range. Year ranges are approximate; confirm the exact changeover point with your dealer using the full PIN. |
Frequently asked questions
What engine does the Caterpillar 988G use?
The 988G runs Caterpillar's 3456 EUI, a turbocharged and air-to-air aftercooled inline-six diesel with electronic unit injection. Net power is about 354 kW (475 hp) at 1900 rpm (ISO 9249), with gross power up to roughly 388 kW (520 hp) depending on rating.
What is the operating weight of the Caterpillar 988G?
Operating weight runs approximately 50,100 to 50,200 kg (about 110,400 to 110,635 lb), varying with bucket type, tire selection, and counterweight configuration.
What replaced the Caterpillar 988G?
Caterpillar replaced the 988G with the 988H starting around 2004-2005; the 988G's own predecessor was the 988F Series II. The lineup later continued with the 988K and, more recently, the 988 GC.
What 988G owners discuss
What engine does the Cat 988G actually run, and does it have any known quirks?
The 988G runs Caterpillar's 3456 electronic unit injection (EUI) diesel, turbocharged and aftercooled, generally cited in the 330 to 390 kW (440 to 520 hp) class depending on whether the source quotes gross or net rating. Owners commonly report a longer than expected crank time on cold starts on this platform; Cat field reps have described that as normal EUI behavior rather than a defect. A smaller number of hard-start or intermittent no-start complaints trace back to a leaking fuel return line rather than the injectors or ECM, so check the return-line fittings before condemning the fuel system.
The loader occasionally drops to neutral or feels like the clutch is slipping mid-shift. What's going on?
This is a recurring complaint on 988-family powershift transmissions. There is a neutralizer/safety plunger that can trip on a momentary drop in pilot oil pressure during a shift, kicking the transmission to neutral in first or second gear; cycling the lever through neutral once or twice usually clears it. Reported root causes include a weak or worn plunger spring, dirt buildup under the brake pedal holding the neutralizer engaged, and debris lodged in a transmission valve spool. Caterpillar also released a factory clutch-pack spring update for the 988G powershift to address shift-quality complaints on some serial ranges, so ask a dealer whether a given machine falls in the affected range and whether the update was done. Have your dealer verify transmission pressures and neutralizer function before returning the machine to work.
Boom won't hoist and curl the bucket at the same time. Is that normal on a 988G?
To a degree, yes. The 988G/H hydraulic circuit shares pump flow between hoist and tilt/curl through a priority arrangement, and several owners describe the boom stopping the instant curl is commanded while still hoisting. That behavior lines up with how the flow-sharing valve is designed, not automatically a fault. If the stoppage is abrupt, total, or clearly worse than the machine used to perform, treat it as worth chasing: check pump output, the priority/flow-sharing valve, and hoist and tilt spool condition rather than writing it off as normal.
What wears out first on a 988G? Is there anything like undercarriage wear to budget for?
A wheel loader has no track undercarriage, so the equivalent wear items are tires, the articulation (center) pin and bushings, and the loader-arm and bucket pin-and-bushing sets. Tires are typically the single biggest line item on a used 988G; a large-loader tire runs into the thousands of dollars each and a full set can be a five-figure expense, so tire condition swings a used-machine deal more than almost anything else. Center-pin and loader-arm bushings wear fastest on machines that were poorly greased over their life; check for play in the articulation joint with the machine loaded against resistance, not just by eye with the machine at rest.
What electrical or sensor problems come up most often on these loaders?
These machines are now well over 20 years old, so corroded connectors and chafed harnesses account for a fair share of complaints blamed on sensors. The most commonly discussed sensor-specific issue is the lift and tilt (kickout) position sensors losing calibration, which throws off the automatic kickout/positioner stops for boom height and bucket angle; recalibrating them is a defined procedure through Cat diagnostic software, not a parts swap. The machine also logs fault codes through its onboard monitoring system that pair a module ID, component ID, and failure mode indicator, and pulling that history is one of the faster ways to narrow an intermittent electrical complaint before chasing wiring blind. Have your dealer verify kickout calibration and confirm it holds correct boom-height and bucket-angle limits before relying on it around obstacles or overhead clearances.
Owners who've run both the 988G and the older 988B, what do they say actually changed?
Most comments center on the front linkage and power. The 988G moved to a fabricated box-section boom with a single joint between the main boom and the bucket, versus the older 988B linkage's two-joint arrangement, and long-time 988B operators generally describe the G's linkage as feeling stiffer and more direct. The G also carries meaningfully more horsepower, more operating weight, a larger bucket, and noticeably more breakout force than the B, which owners moving up cite as the main productivity gain. On the control side, the STIC steering-and-shift lever is generally well liked once operators adjust to it, combining direction and gear selection with steering in one hand instead of a separate wheel and shift lever.
What should I check before buying a used 988G?
Beyond the usual fluid-leak and structural-crack walk-around: weigh engine hours against a realistic mid-life rebuild window for the 3456 EUI engine rather than trusting the hour meter alone; inspect tire tread and casing condition, since replacement cost is significant; run the transmission through every gear and direction under load watching for the neutral-drop behavior owners describe; test hoist and curl together, not just individually, to catch flow-sharing or valve issues; check articulation pin and loader-arm bushing play; and check kickout/positioner sensor calibration. Also ask whether the transmission clutch-pack spring update was performed, and pull any stored fault codes from the monitoring system if the seller has diagnostic access. Have your dealer verify transmission and hydraulic function on a load test before final purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 988G part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.