Caterpillartrack-type loadertrack loader
Caterpillar 973D
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 973D is a large track-type loader, not a bulldozer: it carries General Purpose (GP) or Multi-Purpose (MP) buckets on a Z-bar loader linkage rather than a dozer blade. Power comes from the Cat C9 ACERT, an 8.8 L six-cylinder diesel rated at 196 kW (263 hp) with HEUI electronic fuel injection and ADEM ECM control, meeting Tier 3/Stage IIIA emissions with no aftertreatment or DEF system. Operating weight runs from about 28,058 kg (61,857 lb) for the Standard Track Loader up to about 29,555 kg (65,157 lb) for the Waste Handler package, depending on bucket and configuration. Cat built the 973D in the mid-to-late 2000s as the update to the 973C and continued production into the mid-2010s, with dates varying by source and market, so verify the exact build year by serial number. Drive is an electronically controlled Hystat (hydrostatic) system, with independent variable-displacement pumps and motors driving each track and no torque converter or powershift gearset. Cat offered the platform in Standard and Wide Gauge/LGP track configurations plus several factory application packages on the same chassis: Waste Handler (WH), Waste Handler Extreme Service (WH ES), Steel Mill, and Shiphold/Port Handling (SH), along with an optional 3-shank parallelogram ripper and a rear counterweight package.
The step from the 973C to the 973D brought ACERT-tier electronic engine control and a closed-center, load-sensing implement hydraulic system to the same basic Hystat-driven chassis, replacing the 973C's older mechanical 3306-family engine. All standard, Wide Gauge, Waste Handler, and Shiphold variants share a single documented serial prefix, so identifying the exact configuration on a used machine comes down to the data plate and order specification rather than the serial series. In the used and parts market, the 973D remains a recognizable heavy-duty loader for load-and-carry work, landfill and demolition service, and any application where a wheel loader can't handle the ground conditions. Its Tier 3 engine with no DEF system to maintain is a draw for buyers who want to avoid aftertreatment headaches, while the C9 ACERT's parts commonality across other Cat construction and on-highway platforms keeps engine sourcing reasonably straightforward. Undercarriage and Hystat drive-component wear are the biggest factors in resale value on a machine this heavy, so buyers weigh remaining track and pump/motor life heavily against hour meter readings.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 973D specifications
Engine
| Engine model | Cat C9 ACERT, 8.8 L displacement, six-cylinder in-line diesel with hydraulically actuated electronic fuel injection (HEUI) and ADEM A4 electronic control. Same engine cited across both the Track Loader and Waste Handler factory spec sheets for this model, so no engine change is documented within the D-series run. |
| Net power | 196 kW (263 hp) at 1900 rpm. Figure is identical under Caterpillar, ISO 9249, SAE J1349 and EEC 80/1269 rating methods. Flywheel power is also 196 kW (263 hp). |
| Displacement | 8.8 L (537 in3) |
| Bore x stroke | 112 mm x 149 mm (4.41 in x 5.86 in) |
| Emissions | Meets U.S. EPA Tier 3, European Union Stage IIIA and Japan MOC nonroad exhaust emission standards. No power derate required up to 1219 m (3,999 ft) altitude. |
Weights (by configuration)
| Standard Track Loader - operating weight | 28 058 kg (61,857 lb), with General Purpose bucket, long bolt-on teeth and segments, full fuel and a 75 kg (165 lb) operator |
| Standard Track Loader - shipping weight, no bucket | 25 400 kg (55,997 lb), coolant and lubricants filled, 10% fuel |
| Waste Handler (WH) package - operating weight | 29 555 kg (65,157 lb), with General Purpose Landfill bucket |
| Waste Handler (WH) package - shipping weight, no bucket | 29 430 kg (64,882 lb) |
| Operating weight range across bucket/config combinations | Approximately 27 699-29 553 kg (61,066-65,153 lb) depending on bucket type (GP or MP, with or without teeth) and application package fitted |
| Configuration note | No separate XL or LGP nameplate exists for this model. Instead the factory offers application packages on one chassis: General Construction (standard), Waste Handler, Waste Handler Extreme Service, Steel Mill, Wide Gauge (widened track gauge and shoes for soft ground), and a Shiphold/Port Handling variant. Weight and undercarriage figures shift with the package and bucket fitted. |
Dimensions
| Overall machine width without bucket - 550 mm shoes | 2710 mm (106.7 in) |
| Overall machine width without bucket - 675 mm shoes | 2835 mm (111.6 in) |
| Ground clearance (undercarriage) | 482 mm (19 in) |
| Machine height to top of cab | 3510 mm (138.2 in) |
| Length to front of track | 5300 mm (208.6 in) |
| Overall machine length (GP bucket, extra duty teeth) | 7305 mm (287.6 in); varies 7183-7721 mm (282.8-304.0 in) depending on bucket/teeth combination |
| Overall machine height, bucket fully raised | 5651 mm (222.5 in) |
| Height to bucket hinge pin | 4234 mm (166.7 in) |
| Height to top of stack | 3018 mm (118.8 in) |
| Height to top of seat with headrest | 2975 mm (117.1 in) |
| Track on ground | 2930 mm (115.3 in) |
| Track gauge, standard | 2160 mm (85 in). Wide Gauge package widens both track gauge and shoe width for soft underfoot conditions; the factory literature describes this qualitatively without publishing a separate wide-gauge dimension. |
| Ripper addition to machine length, transport position | 586 mm (23.1 in) |
| Carry position approach angle / grading angle | 15 degrees approach; 85 degrees grading angle |
| Maximum rollback / dump, fully raised | 59 degrees rollback fully raised; 59 degrees dump fully raised; 42 degrees rollback at ground; 49 degrees rollback at carry position |
Undercarriage and ground pressure
| Track shoe type, standard | Double grouser, extreme service |
| Track shoe width, standard | 550 mm (21.6 in) |
| Track shoe width, optional | 675 mm (26.6 in); other optional widths include 500 mm (19.7 in) and 830 mm (32.7 in) in single, double and triple grouser patterns |
| Ground pressure, standard shoe | 85.5 kPa (12.4 psi), calculated at operating weight with GP bucket, teeth and segments |
| Ground pressure, optional 675 mm shoe | 69.5 kPa (10.1 psi) |
| Ground contact area, standard shoe | 3.22 m2 (4,991 in2) |
| Ground contact area, optional shoe | 3.96 m2 (6,138 in2) |
| Grouser height, double grouser | 49 mm (1.92 in) |
| Track rollers per side | 7, plus 2 carrier rollers per side; undercarriage uses an oscillating track roller frame to reduce ground shock |
| Track shoe count per side | 40 sections, 215 mm (8.5 in) pitch |
Performance and drive system
| Drive type | Electronically controlled hydrostatic (Hystat) drive with infinitely variable machine speed; independent power and control to each track with counter-rotation capability |
| Maximum travel speed | 11 km/h (6.8 mph). The factory spec sheet publishes a single maximum speed figure rather than separate forward/reverse gear steps, since the hydrostatic drive uses reversible bent-axis piston motors and has no mechanical gearset. |
| Drawbar pull | Not published in factory literature for this model. Unlike torque-converter dozers, Cat does not issue a drawbar-pull curve for this hydrostatic-drive track loader. |
| Gradeability | Not published in factory literature for this model. |
| Maximum hydrostatic system pressure | 45 000 kPa (6,527 psi) |
| Drive pump | Two variable-displacement, slipper-type axial piston pumps |
| Track motor | Two variable-displacement, bent-axis piston motors |
Buckets and work tools
| Configuration note | The 973D is a track-type loader, not a bulldozer. It is fitted with front-mounted General Purpose (GP) or Multi-Purpose (MP) buckets via a Z-bar linkage rather than S/SU/A/VPAT-style dozer blades. No dozer-blade option is offered for this model. |
| General Purpose bucket capacity, advertised | 3.21 m3 (4.2 yd3) heaped, with long bolt-on teeth and segments; bare bucket without teeth rates 2.86 m3 (3.7 yd3) |
| Multi-Purpose bucket capacity, advertised | 3.05 m3 (3.92 yd3) heaped, with long bolt-on teeth and segments; bare bucket without teeth rates 2.75 m3 (3.6 yd3) |
| General Purpose bucket width | 2910 mm (114.56 in), bare bucket |
| Multi-Purpose bucket width | 2868 mm (112.91 in), bare bucket |
| Landfill package buckets (Waste Handler) | General Purpose Landfill bucket 4.9 m3 (6.4 yd3); Multi-Purpose Landfill bucket 4.6 m3 (6.0 yd3), both widened relative to the standard GP/MP buckets |
| Optional wide bucket package | 3.3 m3 (4.37 yd3) |
| Optional ripper | Parallelogram, 3-shank pockets; ripping width 1840 mm (72.4 in); penetration 397 mm (15.6 in); penetration force at ground level 100 kN (22,500 lbf); ripper weight with 3 shanks 1700 kg (3,747.8 lb) |
Hydraulic system - implement
| Type | Closed-center, load-sensing |
| Maximum output | 346 L/min (91.4 gal/min) |
| Relief valve setting | 27 500 kPa (3,988 psi) |
| Cycle time - raise | 6.5 seconds |
| Cycle time - dump | 1.4 seconds |
| Float down | 2.7 seconds |
Service refill capacities
| Fuel tank | 621 L (164 gal) |
| Cooling system | 44 L (11.6 gal) |
| Engine crankcase, with filter | 29 L (7.7 gal) |
| Final drives, each | 28.5 L (7.5 gal) |
| Hydraulic system total (equipment, power train and tank) | 340 L (89.8 gal) |
| Hydraulic tank refill | 189 L (49.9 gal) |
| Pump drive box | 3.8 L (1 gal) |
| Pivot shaft | 3 L (0.8 gal) |
| Optional fast-fill fuel system flow rate | 568 L/min (150 gal/min) |
Electrical system
| System type | 24V DC |
| Battery | Two 12V batteries, 1400 CCA total capacity |
| Alternator | 95 amp, heavy-duty, brushless |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
973D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) — Cat C9 ACERT, 8.8 L displacement | 29 L (7.7 US gal) | Cat DEO (Diesel Engine Oil). SAE 10W-30 covers most ambient ranges (roughly -18°C to 40°C / 0°F to 104°F); step up to SAE 15W-40 in consistently warm climates. For cold starts below about -20°C (-4°F) a full-synthetic Cat DEO-ULS SYN grade is called for. Always check oil level with the machine parked level and the engine stopped. |
| Cooling system | 44 L (11.6 US gal) | Cat ELC (Extended Life Coolant) is the factory-fill coolant on this machine. A factory-installed extreme-cold antifreeze option rated to -50°C (-58°F) is offered for severe climates. ELC should not be mixed with conventional coolant types. |
| Fuel tank | 621 L (164 US gal) | Clean ultra-low-sulfur No. 2-D diesel; switch to No. 1-D or a winter-blended fuel in cold climates for better cold-flow properties. A fast-fill tank option is available, filling at up to 568 L/min (150 gal/min). |
| Transmission / power train | Combined with the hydraulic system — no separate transmission sump on this machine | The 973D rides on an electronically controlled Hystat (hydrostatic) drive: two variable-displacement drive pumps feeding two variable-displacement track motors, one per track. There is no powershift transmission and no separate bevel-gear or steering-clutch compartment as on a conventional track-type tractor — drive and steering are done electronically through the hydrostatic circuit, which draws from the same reservoir as the implement hydraulics. Fluid recommendation follows the hydraulic system entry below. |
| Final drives (each) | 28.5 L (7.5 US gal) | Cat TDTO (Transmission/Drive Train Oil). Grade is picked by ambient temperature — SAE 10W for cooler climates, SAE 30 where sustained high ambient heat is typical, or a multi-season TDTO blend to cover a wider range and cut down on stocked oil types. |
| Hydraulic system (implement + power train) and hydraulic tank | Total system (implement, power train and tank): 340 L (89.8 US gal). Tank refill alone: 189 L (49.9 US gal) | Cat HYDO Advanced 10 is the factory-fill hydraulic oil listed as standard equipment on this machine, formulated for extended drain intervals. A biodegradable hydraulic oil is offered as a factory option for environmentally sensitive sites. This single closed-center, load-sensing reservoir supplies both the implement circuit (lift/tilt) and the Hystat drive circuit. |
| Pump drive box (accessory/pump drive gearbox) | 3.8 L (1 US gal) | Cat TDTO, same family as the final drives and pivot shaft. |
| Pivot shaft (equalizer/track-frame pivot) | 3 L (0.8 US gal) | Cat TDTO. |
| Grease points (loader linkage, cylinder pins, ripper pins) | Not a refill volume — serviced by grease gun at scheduled intervals | Standard Cat multipurpose lithium-complex grease (NLGI 2 general duty, e.g. Cat Advanced 3Moly or Cat Extreme Application-type grease) at linkage and cylinder pin points. Track rollers and idlers on this machine are factory sealed and lifetime-lubricated, so they carry no scheduled grease point. In sustained sub-zero climates an arctic-grade grease is substituted at the same points. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 973D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 973D beyond the schedule
Predictive maintenance & fluid analysis
Run Cat S.O.S. sampling on the C9 ACERT engine oil, the Hystat drive and implement hydraulic circuit, and final drive oil at every scheduled interval. Metal in a drive-motor sample or dark, burnt-smelling hydrostatic oil flags pump or motor wear before a track loses power. The HEUI fuel system is sensitive to fuel contamination, so watch injector and HEUI pump trend data closely. Because idler and forward rollers carry the heaviest load on this machine, log undercarriage wear percentages against hours instead of judging by eye.
Corrective & common repairs
Most propel complaints on the 973D trace to the park brake failing to release, not a damaged pump or motor; check hydrostatic charge pressure, oil condition, and the park-brake solenoid first. Hystat drive-motor speed-sensor faults are usually a corroded or pinched connector, not a bad sensor, so clean and reseat before replacing parts. On the C9 ACERT, injector swaps need correct ECM trim codes programmed in or the engine stays rough and down on power. Inspect final-drive and idler seal guards on Waste Handler machines for debris damage.
Overhaul & rebuild points
Major 973D rebuild spend centers on the Hystat drive: reman or overhaul the two variable-displacement drive pumps and two bent-axis track motors once oil analysis shows wear metal or charge pressure drops. Pull C9 ACERT injectors and the HEUI pump for flow testing or exchange at the same window. Track shoes, links, and sprocket segments wear as a set on this heavy loader and are best replaced as a full group. Budget loader-tower and Z-bar linkage pin-bore inspection, plus ripper pivot and cylinder rebuild if fitted.
Seasonal & environment servicing
Cold-climate 973Ds need a block heater and the factory extreme-cold antifreeze option, rated to -50C (-58F); there is no DEF system to protect on this Tier 3 engine. Switch to Cat DEO-ULS SYN oil and a winter-blend diesel below about -20C (-4F). In waste, demolition, or steel-mill duty, inspect the final-drive, pivot-shaft, and idler seal guards and debris baffles often, since these packages exist specifically to keep abrasive material out of the driveline. In dusty sites, service the turbine-type air precleaner and radiator fins more often.
973D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 1R-0762 | Filter As-Fuel | Fuel system service | Check fitment → |
| 290-1935 | Filter Element As-Air | Air intake service | Check fitment → |
| 290-1936 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
973D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-03 (CID 100 / FMI 03) | Engine oil pressure sensor signal reads above the valid range. | Open circuit or short to a voltage supply in the oil pressure sensor wiring, a corroded connector, or a failed sensor. | Inspect the sensor connector and wiring for damage or corrosion. Confirm actual oil pressure with a manual gauge before replacing the sensor. |
| 110-04 (CID 110 / FMI 04) | Engine coolant temperature sensor signal reads below the valid range. | Short to ground in the sensor circuit, damaged wiring, or a failed sensor. | Inspect wiring and connector for a ground short. Check sensor resistance against spec and replace if out of range. |
| 168-01 (CID 168 / FMI 01) | Electrical system voltage reads below the normal operating range. | Weak or failing battery, low charging output, corroded battery cables, or a slipping alternator belt. | Load-test the batteries, check charging voltage at idle and at rated speed, and inspect ground straps and cable connections. |
| 102-03 (CID 102 / FMI 03) | Boost (intake manifold) pressure sensor signal reads above the valid range. | Sensor circuit shorted to a voltage source, a damaged harness near the turbo/intake piping, or a failed sensor. | Inspect wiring and connector for chafing near the turbocharger and intake piping, then check sensor supply and signal voltage against spec. |
| 190-08 (CID 190 / FMI 08) | Engine speed/timing sensor signal frequency is abnormal. | Damaged sensor tip, incorrect sensor air gap, debris on the timing wheel, or a wiring fault. | Check the sensor gap and mounting, inspect the timing wheel for damage, and test signal wiring for continuity and shielding faults. |
| 651-05 (CID 0651 / FMI 05) | Cylinder #1 injector solenoid circuit is open; the ECM cannot fire that injector. | Broken or disconnected injector harness, most often where it routes through the valve cover, or a failed injector solenoid. | Inspect the injector harness and valve cover connector for oil contamination or damage. Swap the injector with an adjacent cylinder to confirm whether the fault follows the injector or stays with the wiring. |
| 274-04 (CID 274 / FMI 04) | Atmospheric (barometric) pressure sensor signal reads below the valid range. | Short to ground in the sensor circuit, moisture in the connector, or a failed sensor. | Inspect the sensor connector for corrosion, check circuit resistance against spec, and replace the sensor if wiring tests good. |
| 247-09 (CID 247 / FMI 09) | SAE J1939 data link communication is abnormal; the engine ECM is not receiving expected messages from another control module on the machine network. | Damaged or corroded data link wiring, a powered-down or faulted machine/Hystat control module, or a loose connector on the CAN backbone. | Check for a companion code naming the specific module that dropped off the network, then inspect data link wiring and connectors between the engine ECM and the machine control module before replacing any module. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
973D attachments & work tools
Blades
The 973D is a track loader with Z-bar loader linkage, not a dozer, so it does not offer the D-series S/SU/A/VPAT blade lineup. Front tools are General Purpose (GP) and Multi-Purpose (MP) buckets: GP runs 3.21 m3 (4.2 yd3) at 2910 mm (114.6 in) width, MP runs 3.05 m3 (3.92 yd3) at 2868 mm (112.9 in) width. The MP bucket clamps hydraulically and can convert on the fly into a dozer-type blade for spreading cover material; landfill-duty GP/MP buckets scale up to 4.9 m3 (6.4 yd3) and 4.6 m3 (6.0 yd3) at the same widths, and a Wide Gauge package fits a wider bucket with widened track gauge for soft-ground grading and backfilling (exact width varies by order).
Rippers
Caterpillar catalogs one factory ripper for the 973D: a multi-shank (three-shank) parallelogram unit with curved, replaceable-tip shanks, weighing about 1700 kg (3,748 lb) fully equipped. Ripping width is 1840 mm (72.4 in) with 397 mm (15.6 in) penetration and roughly 100 kN (22,500 lbf) penetration force at ground level; shank cross-section is 74 x 175 mm (2.9 x 6.9 in). No single-shank heavy ripper is offered on this loader class (that configuration is typical of larger dozers); fitting the ripper adds about 586 mm (23.1 in) to overall transport length.
Winches
No factory winch package is catalogued for the 973D in Cat literature; rear-end work capability is limited to towing via the heavy-duty bumper's built-in hitch point, not a cable winch drum. Tether-winch setups used for steep-slope landfill work belong to compactors in the waste industry, not this track loader - confirm with your dealer if a winch-equipped variant is genuinely required for a given job.
Drawbars/counterweights
A counterweight package adds about 1460 kg (3,218 lb) to the rear to shift the center of gravity back; Caterpillar recommends it for machines not fitted with a ripper, since the ripper itself (about 1700 kg/3,748 lb) already loads the rear end and the two options are not meant to stack. The rear also gets a heavy-duty bumper and hinged grille with a built-in hitch point for pulling trucks or other equipment, serving as the drawbar provision; a rear striker bar (standard or heavy-duty) keeps debris off the tracks and doubles as an access step.
Cab/ROPS guarding options for forestry/waste configs
Caterpillar does not sell a package named specifically for forestry on the 973D; severe-duty guarding is sold as Waste Handler (WH, for landfills/transfer stations/material recovery) and Waste Handler Extreme Service (WH ES, for demolition and maximum protection, which requires the heavy-duty rear bumper and grille). Both add final-drive, pivot-shaft and idler seal guards, a lift-cylinder/position-sensor guard, heavy-duty hydraulic tank guard, debris-barrier baffles, trash-resistant radiator and an optional hinged windshield screen ahead of the ROPS/FOPS cab glass, and standardize a turbine-type air precleaner that stays optional on the base construction setup. A separate Steel Mill arrangement (heat shields, sealed undercarriage, heat-resistant windshield, fire-resistant fluids) is the closest analog if extreme flying-debris or heat exposure calls for more protection than WH ES.
Hydraulic arrangement notes for front/rear tools
Implement hydraulics are closed-center load-sensing, rated to 346 L/min (91.4 gal/min) maximum flow with a 27500 kPa (3,988 psi) relief setting; cycle times run about 6.5 seconds raise, 1.4 seconds dump and 2.7 seconds float down. Valve arrangement on the option list tracks the tool fitted: a 2-way (2W) circuit covers a plain GP-bucket lift/tilt, a 3-way (3W) circuit adds the function the MP bucket needs for its hydraulic clamp (its steel lines get dedicated guarding on waste-duty machines), and a 4-way (4W) circuit is specified with the MP bucket so a rear-mounted ripper can run its own cylinders independent of the front tool. Plan on at least 3W hydraulics with the MP bucket and 4W once a ripper is added at the rear.
All 973D assemblies by section
Every catalogued assembly group for the Caterpillar 973D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
277-6062 Air Cleaner Gp
| 16***83 | Coupling | 1 |
| 1W***31 | Clamp-Band; -Turbo Exhaust-Exhaust | 1 |
| 27***62 | Air Cleaner Group | 1 |
290-1934 Air Cleaner Gp
| 17***81 | Hose | 3 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 3 |
| 20***78 | Clamp-Tbolt | 8 |
246-0596 Elbow Gp-Air Inlet
| 11***15 | Stud-Taperlock; (M10x85-mm Oal) | 12 |
| 16***11 | Gasket | 6 |
| 16***72 | Manifold-Exhaust | 1 |
325-1342 Elbow Gp-Exhaust
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 13 |
| 27***22 | Muffler As | 1 |
| 27***28 | Bracket As | 1 |
277-6060 Lines Gp-Air
| 27***60 | Lines Group-Air | 1 |
| 27***39 | Pipe As-Exhaust | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
189-9987 Manifold Gp-Exhaust
| 18***87 | Manifold Group-Exhaust | 1 |
| 29***99 | Duct | 1 |
| 29***15 | Precleaner Group; -With Screen | 1 |
277-6063 Muffler Gp
| 07***07 | Precleaner As; (Air Cleaner Turbine) | 1 |
| 14***69 | Screw-Self-Tapping; (No 10x19.05-mm) | 6 |
| 15***77 | Kit-Screen; (Includes Prescreen, Damper, Tube, Clamp And Screws) | 1 |
277-8740 Pipe Gp-Exhaust
| 27***40 | Pipe Group-Exhaust | 1 |
| 30***40 | Shield | 1 |
| 7X***79 | Washer-Hard; (8.8x25.5x2-mm Thk) | 4 |
290-5615 Precleaner Gp -With Screen
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 15***72 | Clamp As; (Compressor) | 1 |
| 16***63 | Clamp | 2 |
290-5598 Precleaner Gp -With Prescreen
| 29***98 | Precleaner Group; -With Prescreen | 1 |
| 35***99 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
290-5618 Shield Gp-Air Cleaner
| 10***73 | Clip | 1 |
| 12***63 | Adapter Group-Fast Fill Fuel; (Auto Shutoff) | 1 |
| 16***12 | Connector As | 2 |
350-0699 Turbocharger Gp
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
| 34***27 | Bowl As | 1 |
257-9376 Turbocharger Gp
| 25***76 | Turbocharger Group | 1 |
| 27***43 | Cap-Fuel Filler; (Lockable) | 1 |
| 27***89 | Boot-Fuel Cap | 1 |
Basic Engine
242-0674 Camshaft Gp
| 24***74 | Camshaft Group | 1 |
| 27***52 | Cooling Group-Supplemental | 1 |
| 27***56 | Lines Group-Water | 1 |
251-3600 Clutch Gp-Fan
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 22***47 | Gear; (100-Teeth) | 1 |
290-1424 Coupling Gp-Flexible
| 25***26 | Sensor Group-Speed | 1 |
| 28***83 | Kit-Seal & Ring; (Fan Clutch) | 1 |
| 29***24 | Coupling Group-Flexible | 1 |
246-3557 Cover Gp-Cylinder Block -Crankcase Breather
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
| 15***58 | Flange | 1 |
| 24***57 | Cover Group-Cylinder Block; -Crankcase Breather | 1 |
284-0800 Cover Gp-Engine
| 10***85 | Stud; (M8x1.25-Thd) | 1 |
| 20***85 | Gasket | 1 |
| 21***41 | Cylinder Block Cover | 1 |
211-9120 Cover Gp-Front Housing
| 18***07 | Seal-Integral | 1 |
| 21***20 | Cover Group-Front Housing | 1 |
| 28***97 | Adapter-Plate | 1 |
222-1783 Cover Gp-Valve Mechanism
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
| 13***22 | Stud | 2 |
| 16***76 | Cover As-Front | 1 |
164-6148 Crankshaft Gp
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 16***26 | Seal-O-Ring | 1 |
| 16***48 | Crankshaft Group | 1 |
325-3915 Cylinder Block As
| 15***39 | Bearing-Main; (Standard) | 7 |
| 1B***05 | Key; (Woodruff) | 1 |
| 24***16 | Bearing Group-Main | 0 |
220-1952 Cylinder Block Gp
| 0S***19 | Plug-Cup | 1 |
| 1W***07 | Sleeve | 2 |
| 22***52 | Cylinder Block Group | 2 |
161-3406 Cylinder Block Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 2 |
| 16***06 | Cylinder Block Group | 1 |
| 17***54 | Bolt-Hex Head; (M16x160mm) | 14 |
332-3619 Cylinder Head As
| 21***17 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
| 22***00 | Sleeve-Injector | 6 |
| 24***88 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
311-7229 Cylinder Head As
| 16***24 | Seal-Liner | 6 |
| 19***62 | Liner-Cylinder Block | 6 |
| 31***29 | Cylinder Head As | 1 |
345-8414 Cylinder Head Gp
| 11***36 | Adapter As-Drain | 1 |
| 12***83 | Plug-Drain; (Engine Oil Pan) | 1 |
| 34***14 | Cylinder Head Group | 1 |
252-8439 Cylinder Head Gp
| 14***95 | Plug As | 2 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 12 |
| 19***15 | Spring-Valve; (Inner) | 12 |
242-0672 Cylinder Head Gp
| 18***15 | Gasket Assem. | 1 |
| 24***72 | Cylinder Head Group | 1 |
| 25***39 | Cylinder Head Group | 1 |
344-2149 Cylinder Head Gp
| 20***19 | Damper As | 1 |
| 22***21 | Spacer; (101.5x167x8-mm Thk) | 1 |
| 29***32 | Pulley-Fan | 1 |
290-1414 Damper & Pulley Gp
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 29***14 | Damper & Pulley Group | 1 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 1 |
4p-2102 Drain Gp-Engine Oil
| 23***99 | Drain Group-Engine Oil | 1 |
| 4P***02 | Drain Group-Engine Oil | 1 |
239-0099 Drain Gp-Engine Oil
| 23***99 | Drain Group-Engine Oil | 1 |
| 29***01 | Drive Group-Fan | 1 |
| 29***02 | Lines Group-Oil Supply | 1 |
291-1782 Drain Gp-Engine Oil
| 22***09 | Belt Tensioner | 1 |
| 25***00 | Clutch Group-Fan | 1 |
| 27***21 | Pulley-Fan | 1 |
290-5601 Drive Gp-Fan
| 29***01 | Drive Group-Fan | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 6 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 2 |
277-8709 Drive Gp-Fan
| 26***15 | Bolt-12 Point Head; (M16x2x180-mm) | 1 |
| 27***09 | Drive Group-Fan | 1 |
| 29***84 | Fastener Group-Cylinder Head | 26 |
213-4363 Fastener Gp-Cylinder Head
| 21***63 | Fastener Group-Cylinder Head | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***36 | Bolt; (M12x1.75x70-mm) | 6 |
219-8681 Fastener Gp-Front Cover
| 09***49 | Bolt; (M8x1.25x40-mm) | 11 |
| 21***81 | Fastener Group-Front Cover | 1 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 11 |
116-4556 Fastener Gp-Front Housing
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 24***00 | Spring | 9 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 9 |
236-7315 Fastener Gp-Valve Cover
| 23***15 | Fastener Group-Valve Cover | 1 |
| 29***06 | Flywheel As | 1 |
| 4N***14 | Gear; (113-Teeth)(Flywheel Starter) | 1 |
233-0423 Fastener Gp-Valve Cover Base
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
| 11***19 | Plate-Retaining | 1 |
290-1410 Flywheel Gp
| 1W***38 | Bearing-Sleeve | 1 |
| 20***24 | Bearing-Sleeve | 1 |
| 27***05 | Gear As-Pump Drive; (59-Teeth) | 2 |
205-1321 Gear Gp-Front
| 1W***38 | Bearing-Sleeve | 1 |
| 20***21 | Gear Group-Front, Name-Plate (Norwegian) | 1 |
| 20***24 | Bearing-Sleeve | 1 |
346-4295 Gear Gp-Rear
| 17***42 | Seal-O-Ring | 1 |
| 17***91 | Stud-Weld; (M10x1.5x35-mm Oal) | 1 |
| 17***21 | Cover | 1 |
277-4103 Gear Gp-Rear
| 27***03 | Gear Group-Rear | 1 |
| 27***44 | Guard As | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
277-6069 Guard Gp-Belt
| 20***22 | Bearing-Sleeve | 2 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 7 |
| 27***10 | Housing-Flywheel | 1 |
277-4109 Housing Gp-Flywheel
| 17***21 | Cover | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 27***09 | Housing Group-Flywheel | 1 |
348-5931 Housing Gp-Flywheel
| 29***18 | Bracket-Lifting | 1 |
| 31***69 | Support As-Fan | 1 |
| 34***31 | Housing Group-Flywheel | 1 |
277-4108 Housing Gp-Flywheel
| 16***61 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 5 |
| 18***08 | Plug As; (High Temperature) | 1 |
323-4729 Housing Gp-Flywheel
| 1U***46 | Sealant (For Locations A) | 0 |
| 24***59 | Housing-Front | 1 |
| 32***29 | Housing Group-Flywheel | 1 |
245-3260 Housing Gp-Front
| 24***60 | Housing Group-Front | 1 |
| 29***18 | Bracket-Lifting | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 4 |
316-0265 Lifting Gp-Engine
| 12***40 | Support-Alternator | 1 |
| 13***82 | Support-Alternator | 1 |
| 31***65 | Lifting Group-Engine | 1 |
338-3950 Lifting Gp-Engine
| 15***12 | Mount As | 4 |
| 30***43 | Support As | 2 |
| 33***50 | Lifting Group-Engine | 1 |
290-1417 Lifting Gp-Engine
| 29***17 | Lifting Group-Engine | 1 |
| 31***69 | Support As-Fan | 1 |
| 6V***22 | Bolt (M10x1.50x35mm) | 5 |
169-3130 Mounting Gp-Alternator
| 16***30 | Mounting Group-Alternator | 1 |
| 17***47 | Pan-Oil | 1 |
| 19***14 | Gasket-Oil Pan; (Engine) | 1 |
277-6064 Mounting Gp-Engine & Xmsn
| 22***92 | Seal-O-Ring | 1 |
| 23***82 | Seal-O-Ring | 1 |
| 27***64 | Mounting Group-Engine & Xmsn | 1 |
323-9469 Pan Gp-Oil
| 32***69 | Pan Group-Oil | 1 |
| 8T***61 | Plug; (Pipe) (1-11-1/2 Nptf Thd) | 1 |
165-4459 Pan Gp-Oil -Engine
| 16***94 | Bearing; (Connecting Rod) | 1 |
| 16***97 | Bolt | 2 |
| 16***99 | Rod Assem. | 1 |
265-1400 Piston & Rod Gp
| 14***08 | Plug As. | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
| 18***08 | Plug As; (High Temperature) | 1 |
252-1567 Plug Gp-Engine
| 16***47 | Rocker Arm As | 1 |
| 25***67 | Plug Group-Engine; (Engine) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
228-0784 Plug Gp-Engine
| 15***36 | Pulley-Crankshaft; (8-Groove) | 1 |
| 22***84 | Plug Group-Muffler | 1 |
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
211-8043 Pulley Gp-Crankshaft
| 21***43 | Pulley Group-Crankshaft | 1 |
| 24***28 | Rocker Arm As | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
242-0329 Rocker Arm Gp -Inlet
| 13***00 | Bolt-Plt; (M16 X 2.0 X 90) | 4 |
| 19***68 | Washer-Hard; (17.5x32x8-mm Thk) | 8 |
| 20***73 | Bolt; (M16x2x60-mm) | 4 |
213-9320 Rocker Arm Gp -Exhaust
| 20***19 | Bolt Assem.; (M6x1) | 9 |
| 21***20 | Rocker Arm Group; -Exhaust | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
178-3899 Seal Gp-Crankshaft
| 16***45 | Shaft As-Rocker Arm | 1 |
| 16***59 | Spring | 6 |
| 16***69 | Stand; (End) | 2 |
290-1421 Support Gp-Engine
| 16***37 | Lifter As-Valve | 12 |
| 21***26 | Valve Mechanism Group | 1 |
| 24***91 | Bridge-Valve | 6 |
242-0447 Valve Mechanism Gp
| 13***19 | Seal-Integral; (Integral) | 1 |
| 19***26 | Tube As | 1 |
| 24***47 | Valve Mechanism Group | 1 |
212-8926 Valve Mechanism Gp
| 13***19 | Seal-Integral; (Integral) | 1 |
| 19***26 | Tube As | 1 |
| 21***26 | Valve Mechanism Group | 1 |
Cooling System
188-3826 Cooler Gp-Engine Oil
| 18***26 | Cooler Group-Engine Oil | 1 |
| 28***73 | Core As-Radiator; (Hydraulic Oil) | 1 |
| 28***74 | Core As-Aftercooler; (Engine) | 1 |
277-6052 Cooling Gp-Supplemental
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 14***11 | Plug Group | 2 |
| 22***80 | Elbow | 1 |
288-4522 Cooling Gp-Supplemental
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 14 |
| 25***11 | Spider As-Fan; (8-Blade) | 1 |
| 28***22 | Guard As-Fan | 2 |
290-1426 Elbow Gp-Water
| 14***12 | Adapter As | 1 |
| 16***95 | Elbow As | 1 |
| 17***71 | Connector Group | 1 |
277-6058 Fan Gp-Blower
| 03***48 | Clip; (11.11mm .437in Id) | 4 |
| 10***73 | Clip | 1 |
| 12***47 | Spacer; (10.5x20x12-mm Thk) | 1 |
290-1425 Fitting Gp-Water Lines
| 14***11 | Plug Group | 1 |
| 15***48 | Elbow As | 1 |
| 18***56 | Block | 1 |
290-1423 Lines Gp-Water
| 29***23 | Lines Group-Water | 1 |
| 29***16 | Baffle | 1 |
| 30***45 | Plate | 1 |
277-6056 Lines Gp-Water
| 15***20 | Washer; (17x56x5-mm Thk) | 6 |
| 18***31 | Mount-Rubber | 8 |
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 2 |
277-6054 Mounting Gp-Radiator
| 14***88 | Seal As; (Water Pump) | 1 |
| 17***44 | Cover | 1 |
| 17***52 | Shaft As | 1 |
292-2970 Plate Gp
| 16***13 | Adapter As | 1 |
| 29***34 | Air Cleaner Group | 1 |
| 29***70 | Plate Group | 1 |
202-7674 Pump Gp-Water
| 11***63 | Clip-Spring | 12 |
| 20***74 | Pump Group-Water | 1 |
| 29***35 | Filter Element As-Air; (Primary) | 1 |
219-4452 Pump Gp-Water
| 16***48 | Stud; (M8x1.25x40-mm, M8x1.25x17.5-mm) | 8 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 21***52 | Pump Group-Water | 1 |
Electrical And Starting System
3e-6328 Alarm Gp
| 03***09 | Terminal-Ring; (For 1/4-In Bolt) | 2 |
| 13***25 | Receptacle As; (2-Pin) | 1 |
| 13***31 | Gasket | 1 |
197-8820 Alternator Gp-Charging
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 12***74 | Cover-Connector; (Wire Router) | 1 |
277-6066 Alternator Gp-Charging
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 14***92 | Stud; (M8x1.25-Thd) | 4 |
| 22***73 | Control Group-Engine Electronic | 1 |
277-2483 Battery & Wiring Gp
| 26***78 | Control Group-Unprogrammed; (Engine) | 1 |
| 27***83 | Battery & Wiring Group | 1 |
9w-0742 Block Gp-Junction -Battery
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 28***33 | Control Group-Unprogrammed; (Product Link 300) | 1 |
254-3477 Circuit Breaker Gp
| 25***07 | Electronics Group-Machine | 1 |
| 25***77 | Circuit Breaker Group | 1 |
308-0606 Control & Mtg Gp-Electronic -Bucket, Ripper
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 30***06 | Control & Mtg Group-Electronic; -Bucket, Ripper | 1 |
246-9365 Control & Mtg Gp-Engine Elek
| 24***65 | Control & Mtg Group-Engine Elek | 1 |
| 30***87 | Control Group-Unprogrammed; (Transmission) | 1 |
| 34***36 | Software Group-Machine | 1 |
226-7473 Control Gp-Engine Electronic
| 22***73 | Control Group-Engine Electronic | 1 |
| 32***49 | Software Group-Machine | 1 |
239-9954 Control Gp-Unprogrammed -Product Link 300
| 13***27 | Element As-Jacket Water Heater; (120-Volt, 1250-Watt) | 1 |
| 13***17 | Cap As-Dust | 1 |
| 21***89 | Film-Identification; (Water Heater) | 1 |
289-9472 Electronics Ar
| 12***09 | Cord As-Heater Element; -240-Volt | 1 |
| 13***17 | Cap As-Dust | 1 |
| 15***81 | Element As-Jacket Water Heater; (240-Volt, 1250-Watt) | 1 |
262-2043 Electronics Gp-Communication -Product Link 300
| 23***54 | Control Group-Unprogrammed; (Product Link 300)(Product Link 321sr) | 1 |
| 26***43 | Electronics Group-Communication; -Product Link 300 | 2 |
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
253-3407 Electronics Gp-Machine
| 25***07 | Electronics Group-Machine | 1 |
| 31***86 | Bracket As | 1 |
| 31***87 | Gasket | 1 |
326-1849 Electronics Gp-Machine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 19***89 | Film-Identification; (Ignition Switch) | 1 |
294-7841 Electronics Gp-Monitor
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 1 |
294-7838 Electronics Gp-Monitor
| 16***03 | Sensor Group-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 29***38 | Electronics Group-Monitor | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
294-7836 Electronics Gp-Monitor
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***34 | Probe As-Liquid Level; (Water Separator) | 1 |
294-7844 Electronics Gp-Monitor
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 29***44 | Electronics Group-Monitor | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
294-7842 Electronics Gp-Monitor
| 21***67 | Seal-O-Ring | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 29***42 | Electronics Group-Monitor | 1 |
294-7840 Electronics Gp-Monitor
| 16***04 | Sensor Group-Pressure; (Turbocharger Outlet) | 1 |
| 29***40 | Electronics Group-Monitor | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
294-7843 Electronics Gp-Monitor
| 29***43 | Electronics Group-Monitor | 1 |
| 6J***45 | Seal (.674" Inside Diameter) | 1 |
294-7830 Electronics Gp-Monitor
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
294-7832 Electronics Gp-Monitor
| 25***48 | Switch As-Rocker; (Front, Rear Floodlights) | 1 |
| 29***32 | Electronics Group-Monitor | 1 |
| 31***72 | Lamp Group-Flood | 8 |
294-7831 Electronics Gp-Monitor
| 21***87 | Lamp Group-Flood; -24-Volt, 65-Watt | 4 |
| 25***48 | Switch As-Rocker; (Front, Rear Floodlights) | 1 |
| 29***31 | Electronics Group-Monitor | 1 |
294-7834 Electronics Gp-Monitor
| 29***34 | Electronics Group-Monitor | 1 |
294-7839 Electronics Gp-Monitor
| 16***05 | Sensor As-Pressure; (Unfiltered Engine Oil) | 1 |
| 29***39 | Electronics Group-Monitor | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
294-7835 Electronics Gp-Monitor
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
294-7829 Electronics Gp-Monitor
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
294-7837 Electronics Gp-Monitor
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 29***37 | Electronics Group-Monitor | 1 |
294-7845 Electronics Gp-Monitor
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 29***45 | Electronics Group-Monitor | 1 |
294-7833 Electronics Gp-Monitor
| 21***88 | Lamp Group-Flood; -Cab Roof, Front | 4 |
| 29***33 | Electronics Group-Monitor | 1 |
301-2730 Heater Gp-Jacket Water
| 17***49 | Strap; (Marker) | 1 |
| 23***12 | Receptacle As-Connector; (2-Pin) | 1 |
| 30***30 | Heater Group-Jacket Water | 1 |
301-2731 Heater Gp-Jacket Water
| 13***45 | Pad; (Connector) | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
309-5907 Installation Ar-Communication -Product Link 321sr
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 30***07 | Installation Ar-Communication; -Product Link 321sr | 1 |
| 6V***09 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
310-6789 Installation Gp-Communication
| 18***51 | Cylinder As-Ether; (Eame) | 1 |
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
| 23***34 | Valve Group-Ether Starting | 1 |
254-3480 Installation Gp-Security
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
219-6487 Lamp Gp-Flood
| 21***87 | Lamp Group-Flood; -24-Volt, 65-Watt | 1 |
| 22***71 | Bolt-12 Point Head; (M16x2x45-mm) | 3 |
| 26***57 | Starting Motor Group-Electric | 1 |
219-6488 Lamp Gp-Flood
| 21***88 | Lamp Group-Flood; -Cab Roof, Front | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
302-4254 Lamp Gp-Warning Beacon
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 30***54 | Lamp Group-Warning Beacon | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 2 |
308-0605 Lighting Gp-Flood -Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 30***05 | Lighting Group-Flood; -Cab | 1 |
307-1394 Lighting Gp-Flood -Steel Mill
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 30***94 | Lighting Group-Flood; -Steel Mill | 1 |
254-3478 Lighting Gp-Flood -Cab Front, Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 20***77 | Bolt-Flange Head; (M8x1x25-mm) | 2 |
254-3481 Lighting Gp-Warning Beacon
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 25***81 | Lighting Group-Warning Beacon | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
231-1978 Sensor Gp-Engine
| 23***78 | Sensor Group-Engine | 1 |
| 32***26 | Harness As-Cab | 1 |
| 3E***39 | Relay As; (24-Volt)(General Alarm) | 1 |
178-2345 Sensor Gp-Liquid Level
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
266-1467 Sensor Gp-Position
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
197-8394 Sensor Gp-Pressure
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 09***23 | Screw; (M3x0.5x10-mm) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
236-6220 Sensor Gp-Pressure
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 11***46 | Locknut; (M6x1-Thd) | 4 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 2 |
210-1747 Sensor Gp-Pressure
| 09***23 | Screw; (M3x0.5x10-mm) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
197-8393 Sensor Gp-Pressure
| 12***74 | Cover-Connector; (Wire Router) | 1 |
| 13***25 | Receptacle As; (2-Pin) | 2 |
| 13***26 | Plug As-Connector; (2-Pin) | 1 |
224-4536 Sensor Gp-Pressure
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 11***46 | Locknut; (M6x1-Thd) | 4 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 2 |
262-4806 Sensor Gp-Speed
| 17***42 | Seal-O-Ring | 1 |
| 26***06 | Sensor Group-Speed | 1 |
| 29***24 | Coupling Group-Flexible | 1 |
351-6987 Sensor Gp-Speed
| 10***86 | Sleeve | 1 |
| 11***17 | Clip | 2 |
| 12***98 | Plate | 1 |
236-6221 Sensor Gp-Speed -Engine Timing
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
251-3626 Sensor Gp-Speed
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 12***66 | Socket-Connector; (14-Ga To 18-Ga) | 30 |
204-6204 Sensor Gp-Speed
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***46 | Locknut; (M6x1-Thd) | 4 |
| 11***18 | Clip | 1 |
274-7396 Sensor Gp-Temperature
| 11***33 | Cone-Bearing | 4 |
| 11***34 | Cup-Bearing | 4 |
| 16***03 | Carrier As | 2 |
274-7395 Sensor Gp-Temperature
| 10***28 | Filter-Oil; (Ultra High Efficiency) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***14 | Filter-Oil; (Fire Resistant Fluid) | 1 |
277-6068 Starting Aid Gp-Ether
| 27***62 | Final Drive & Brake Group | 1 |
| 27***68 | Starting Aid Group-Ether | 1 |
| 29***62 | Cover As; (Rh) | 1 |
269-2757 Starting Motor Gp-Electric
| 11***33 | Cone-Bearing | 4 |
| 11***34 | Cup-Bearing | 4 |
| 16***03 | Carrier As | 2 |
290-5600 Starting Motor Gp-Electric
| 29***00 | Starting Motor Group-Electric | 1 |
| 29***62 | Cover As; (Rh) | 1 |
| 29***63 | Cover As; (Lh) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 11***33 | Cone-Bearing | 4 |
| 11***34 | Cup-Bearing | 4 |
| 16***03 | Carrier As | 2 |
223-7577 Switch Gp-Magnetic -Start Relay
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 16***16 | Adapter As | 2 |
209-5582 Switch Gp-Magnetic -Start Relay
| 10***14 | Seal-O-Ring | 1 |
| 13***22 | Plug-Break Off | 2 |
| 13***84 | Piston | 1 |
241-8368 Switch Gp-Magnetic -Main Relay
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 3 |
| 14***34 | Connector Group | 3 |
| 14***56 | Elbow As | 1 |
258-0883 Switch Gp-Pressure -Fuel Filter
| 03***57 | Washer; (13x26x6-mm Thk) | 32 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 8 |
| 1P***67 | Flange-Half (43.31 mm Id) | 16 |
165-5970 Switch Gp-Toggle -Fuel Priming Pump
| 03***57 | Washer; (13x26x6-mm Thk) | 32 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
| 1P***67 | Flange-Half (43.31 mm Id) | 16 |
239-1134 Valve Gp-Ether Starting
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***28 | Connector Assem. | 1 |
323-8127 Wiring Gp-Cab
| 11***45 | Hose As | 1 |
| 11***12 | Hose As | 1 |
| 15***57 | Seal-O-Ring | 1 |
327-7801 Wiring Gp-Cab
334-5104 Wiring Gp-Cab
| 13***52 | Seal-O-Ring | 4 |
| 13***13 | Cap-Dust | 1 |
| 13***14 | Cap-Dust | 1 |
302-5696 Wiring Gp-Cab Tilt
| 13***52 | Seal-O-Ring | 4 |
| 13***13 | Cap-Dust | 1 |
| 13***14 | Cap-Dust | 1 |
309-4221 Wiring Gp-Chassis -Steel Mill
| 09***69 | Bolt | 6 |
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 6 |
| 28***73 | Pump Group-Piston; -Hydrostatic Drive, Lh | 1 |
277-2482 Wiring Gp-Chassis
| 27***24 | Motor & Mtg Group-Travel; -Hydrostatic Drive | 1 |
| 27***25 | Pump & Mtg Group-Power Train; -Hydrostatic Drive | 1 |
| 27***26 | Lines Group-Drain | 1 |
282-6699 Wiring Gp-Control -Bucket
309-5906 Wiring Gp-Control -Hydrostatic Drive
280-9675 Wiring Gp-Control -Multipurpose Bucket
| 28***75 | Wiring Group-Control; -Multipurpose Bucket | 1 |
| 31***99 | Solenoid As; (Pump Control Valve) | 1 |
| 32***69 | Rotating Group-Pump | 1 |
280-9449 Wiring Gp-Control
| 25***29 | Pin | 2 |
| 28***49 | Wiring Group-Control | 1 |
| 3J***67 | Capscrew, Socket Head (7/16 - 14 X 2 3/4 G8) | 4 |
290-1428 Wiring Gp-Electronic Control
288-4532 Wiring Gp-Engine
Engine Arrangement
273-0744 Engine Ar
| 21***74 | Segment Group-Sprocket | 2 |
| 27***44 | Engine Ar | 1 |
| 28***44 | Tank Group-Fuel; -Steel Mill | 1 |
334-5258 Engine Ar-Complete
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 16***59 | Pan Group-Oil; -Engine | 1 |
| 16***30 | Mounting Group-Alternator | 1 |
277-4101 Engine Ar-Complete
| 27***01 | Engine Ar-Complete | 2 |
| 27***65 | Pump Group-Fuel | 1 |
| 27***66 | Alternator Group-Charging | 1 |
277-4102 Engine Ar-Core
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 16***59 | Pan Group-Oil; -Engine | 1 |
| 16***30 | Mounting Group-Alternator | 1 |
273-0749 Installation Ar-Engine
| 16***06 | Cylinder Block Group | 1 |
| 16***48 | Crankshaft Group | 1 |
| 18***26 | Cooler Group-Engine Oil | 1 |
Frame And Body
292-3297 Baffle Gp -Steel Mill
| 28***91 | Guard As; (Rh) | 1 |
| 28***92 | Guard As; (Lh) | 1 |
| 29***97 | Baffle Group; -Steel Mill | 1 |
291-0786 Baffle Gp
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 4 |
| 28***84 | Guard Group | 1 |
| 28***05 | Grid As | 1 |
291-1918 Bar Gp-Striker
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 4 |
| 29***84 | Plate | 1 |
| 29***18 | Bar Group-Striker | 1 |
287-6749 Bumper Gp
| 28***49 | Bumper Group | 1 |
| 33***28 | Guard As; (Rh) | 1 |
| 33***29 | Guard As; (Lh) | 1 |
290-7072 Bumper Gp-Rear -Heavy Duty
| 26***14 | Guard-Light; (Rh) | 1 |
| 28***02 | Guard-Light; (Lh) | 1 |
| 29***72 | Bumper Group-Rear; -Heavy Duty | 1 |
292-9009 Counterweight Gp
| 14***18 | Spacer; (13.5x30x10-mm Thk) | 2 |
| 19***67 | Washer-Hard; (13.5x30x12-mm Thk) | 6 |
| 29***09 | Counterweight Group | 1 |
292-2968 Cover Gp -Steel Mill
| 29***68 | Cover Group; -Steel Mill | 1 |
| 30***26 | Guard As; (Rh) | 1 |
| 30***27 | Guard As; (Lh) | 1 |
291-2335 Cover Gp-Access
| 29***35 | Cover Group-Access | 1 |
| 32***12 | Plate-Guard | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 6 |
323-8020 Cover Gp-Access -Steel Mill
| 09***33 | Pin-Cotter | 1 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 12 |
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 6 |
287-6765 Door Gp-Access -Rh
| 15***21 | Cap As | 1 |
| 22***94 | Lock As | 1 |
| 28***18 | Seal; (60-cm Each) | 0 |
287-6767 Door Gp-Access -Lh
| 15***21 | Cap As | 1 |
| 22***94 | Lock As | 1 |
| 28***18 | Seal; (60-cm Each) | 0 |
291-1917 Fender Gp -Rh-Steel Mill
| 28***56 | Plate | 2 |
| 29***17 | Fender Group; -Rh-Steel Mill | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 8 |
277-2480 Fender Gp
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 14 |
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 4 |
| 27***25 | Handle | 2 |
291-1284 Fender Gp -Steel Mill
| 21***43 | Shim; (1-mm Thk) | 2 |
| 27***47 | Bracket | 1 |
| 27***20 | Rod As | 1 |
287-6752 Fender Gp -Lh
| 21***43 | Shim; (1-mm Thk) | 2 |
| 27***47 | Bracket | 1 |
| 27***20 | Rod As | 1 |
287-6751 Fender Gp -Rh
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 14 |
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 4 |
| 27***25 | Handle | 2 |
291-1916 Fender Gp -Lh-Steel Mill
| 28***55 | Plate | 2 |
| 29***16 | Fender Group; -Lh-Steel Mill | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 8 |
274-9800 Frame Gp-Loader
| 09***67 | Washer; (22x60x8-mm Thk) | 10 |
| 27***00 | Frame Group-Loader | 1 |
| 29***50 | Shield Group-Heat; -Steel Mill | 1 |
287-6776 Grill Gp-Radiator
| 26***21 | Shield As | 1 |
| 28***76 | Grill Group-Radiator | 1 |
| 29***23 | Shield As | 1 |
290-7074 Grill Gp-Radiator -Heavy-Duty
| 29***74 | Grill Group-Radiator; -Heavy-Duty | 1 |
| 32***37 | Shield | 1 |
309-8896 Guard Gp -Steel Mill
| 06***05 | . Ring; Slide, Washer; (26x63.5x6-mm Thk) | 6 |
| 30***96 | Guard Group; -Steel Mill | 1 |
| 31***46 | O Ring Seal, Step As; (Rh) | 1 |
287-6784 Guard Gp
| 27***84 | Step As | 2 |
| 28***84 | Guard Group | 1 |
| 8T***40 | Bolt-Plt; (M16 X 2.0 X 60) | 8 |
292-2967 Guard Gp -Steel Mill
| 14***44 | Spacer; (11x19x20-mm Thk) | 2 |
| 1V***56 | Spacer; (0.493x0.675x0.85-In Thk) | 1 |
| 22***18 | Bumper | 2 |
287-7701 Guard Gp-Bottom
| 11***21 | Seal; (139cm) | 0 |
| 12***28 | Adaptor - Includes:- | 2 |
| 16***25 | Lanyard | 1 |
291-1283 Guard Gp-Bottom -Steel Mill
| 0S***22 | Washer 6.35 mm (.25 In.) Thick | 1 |
| 25***03 | Nut-Square; (M24x3-Thd) | 4 |
| 28***94 | Pin | 2 |
328-2749 Guard Gp-Cylinder -Steel Mill
| 0S***22 | Washer 6.35 mm (.25 In.) Thick | 1 |
| 25***03 | Nut-Square; (M24x3-Thd) | 4 |
| 28***94 | Pin | 2 |
305-7385 Guard Gp-Final Drive -Heavy-Duty
| 1T***68 | Pin (.188" Diameter) | 1 |
| 30***85 | Guard Group-Final Drive; -Heavy-Duty | 1 |
| 30***41 | Cap As-Track Idler | 1 |
305-7380 Guard Gp-Final Drive -Heavy-Duty
| 0S***22 | Washer 6.35 mm (.25 In.) Thick | 1 |
| 25***03 | Nut-Square; (M24x3-Thd) | 4 |
| 28***94 | Pin | 2 |
287-6748 Guard Gp-Front
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 20 |
| 22***00 | Bearing-Sleeve | 2 |
| 22***01 | Bearing-Sleeve | 2 |
333-9627 Guard Gp-Front -Mud Deflector
| 1K***83 | Boss | 24 |
| 30***20 | Guard As; (Rh), Oil Manifold | 2 |
| 30***21 | Guard As; (Lh) | 2 |
291-1282 Guard Gp-Front -Steel Mill
| 19***82 | Washer-Hard; (26x47x12-mm Thk) | 12 |
| 28***99 | Guard As; (Lh) | 2 |
| 28***00 | Guard As; (Rh) | 2 |
287-6746 Guard Gp-Front
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 20 |
| 22***00 | Bearing-Sleeve | 2 |
| 22***01 | Bearing-Sleeve | 2 |
256-7406 Guard Gp-Lighting
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 6 |
| 19***81 | Washer-Hard; (22x40x10-mm Thk) | 4 |
| 25***06 | Guard Group-Lighting | 1 |
287-6747 Guard Gp-Lines
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 6 |
| 19***81 | Washer-Hard; (22x40x10-mm Thk) | 4 |
| 28***47 | Guard Group-Lines | 1 |
328-2733 Guard Gp-Lines
| 10***57 | Seal-O-Ring | 2 |
| 11***05 | Idler As | 1 |
| 16***67 | Ring-Toric | 2 |
309-7525 Guard Gp-Lines -Ripper
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 6 |
| 19***81 | Washer-Hard; (22x40x10-mm Thk) | 4 |
| 29***90 | Plate-Wear | 1 |
277-2481 Guard Gp-Rear
| 10***57 | Seal-O-Ring | 2 |
| 10***88 | Ring-Sealing | 2 |
| 11***05 | Idler As | 1 |
309-8021 Hitch Gp
| 15***73 | Ring-Thrust | 160 |
| 15***80 | Pin-Track | 40 |
| 16***58 | Joint As-Track Link; (Rotating Bushing Track, Rh)(Rotating Bushing Track) | 39 |
291-2337 Hood Gp
| 24***75 | Bushing-Track | 39 |
| 24***76 | Bushing-Master | 1 |
| 28***83 | Link-Track; (Rh) | 40 |
287-6756 Hood Gp -Precleaner
| 15***73 | Ring-Thrust | 80 |
| 19***94 | Pin-Track | 40 |
| 23***90 | Bushing-Track | 40 |
322-9874 Hood Gp -Precleaner
| 1S***74 | Seal-O-Ring (164.69mm Id) | 2 |
| 2Q***67 | Ring | 1 |
| 32***74 | Hood Group; -Precleaner | 1 |
322-9872 Hood Gp
| 1S***74 | Seal-O-Ring (164.69mm Id) | 2 |
| 2Q***67 | Ring | 1 |
| 32***72 | Hood Group | 1 |
287-6762 Panel Gp-Enclosure -Lh
| 12***58 | Ring-Retaining | 2 |
| 12***55 | Rim As-Double Flange | 1 |
| 12***67 | Bushing Assembly | 2 |
287-6761 Panel Gp-Enclosure -Rh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 3 |
| 0T***29 | Locking Plate,Nut A Pump Mtg Part Of Kit P/N 5r***25 | 1 |
| 0T***03 | Bolt Bracket To Starting Engine Fuel Tank | 2 |
292-5721 Plate Gp-Cover
| 23***60 | Roller Group-Track-Double Flange | 1 |
| 29***21 | Plate Group-Cover | 1 |
| 6V***33 | Bolt; (M24x3.0x80mm) | 4 |
292-5722 Plate Gp-Cover
| 11***28 | Shaft-Roller | 1 |
| 12***58 | Ring-Retaining | 2 |
| 12***55 | Rim As-Double Flange | 1 |
292-0843 Plate Gp-Frame
| 29***43 | Plate Group-Frame | 1 |
| 5Q***93 | Roller Group-Track-Double Flange; -Steel Mill | 1 |
| 6V***33 | Bolt; (M24x3.0x80mm) | 4 |
291-1285 Shield Gp-Heat -Steel Mill
| 12***58 | Ring-Retaining | 2 |
| 12***51 | Rim Assembly (Each Includes) | 1 |
| 12***67 | Bushing Assembly | 2 |
328-2738 Shield Gp-Heat -Steel Mill
| 11***28 | Shaft-Roller | 1 |
| 12***58 | Ring-Retaining | 2 |
| 12***51 | Rim Assembly (Each Includes) | 1 |
291-4650 Shield Gp-Heat -Steel Mill
| 23***61 | Roller Group-Track-Single Flange | 1 |
| 29***50 | Shield Group-Heat; -Steel Mill | 1 |
| 6V***33 | Bolt; (M24x3.0x80mm) | 4 |
287-6742 Step Gp
| 28***42 | Step Group | 1 |
| 5Q***92 | Roller Group-Track-Single Flange; -Steel Mill | 1 |
| 6V***33 | Bolt; (M24x3.0x80mm) | 4 |
310-2650 Step Gp
| 17***46 | Seal; (Lip Type) | 1 |
| 19***09 | Valve-Fill; (Grease) | 1 |
| 27***76 | Plate | 1 |
290-5472 Step Gp
| 10***23 | Bolt-Socket Head; (M12x1.75x20-mm) | 2 |
| 29***72 | Step Group | 1 |
| 29***56 | Spring | 1 |
289-9436 Tilt Gp-Platform
| 28***36 | Tilt Group-Platform | 1 |
| 29***12 | Link As-Track | 1 |
| 7H***99 | Bolt-Track; (7/8-14x2.65in) | 156 |
Fuel System
287-6783 Adapter Gp-Fast Fill Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
306-4998 Cap Gp-Fuel Filler -Lockable, Vented
| 1P***09 | Clip 15.9 mm (.62 In.) Dia. | 1 |
| 26***17 | Connector | 2 |
| 26***30 | Elbow | 1 |
174-9570 Filter Gp-Water Sep & Fuel
| 15***03 | Clamp-Hose | 4 |
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 8 |
328-2576 Injector Gp-Fuel
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
| 14***07 | Adapter As | 1 |
277-6059 Lines Gp-Fuel
| 13***89 | Clip; (Ladder) | 2 |
| 14***45 | Connector As | 1 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
307-2783 Lines Gp-Fuel -Steel Mill
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 30***83 | Lines Group-Fuel; -Steel Mill | 1 |
| 32***76 | Injector Group-Fuel | 1 |
290-1419 Lines Gp-Fuel Filter
| 26***18 | Pump Group-Fuel Injection | 6 |
| 29***19 | Lines Group-Fuel Filter | 1 |
277-6065 Pump Gp-Fuel
| 06***39 | Seal-O-Ring | 1 |
| 18***23 | Pump As-Fuel Priming | 1 |
| 22***18 | Valve As; (Fuel Priming Pump) | 2 |
267-9723 Pump Gp-Fuel Injection
| 03***50 | Elbow (Check Valve Drain Tube) | 1 |
| 18***99 | Connector As | 2 |
| 18***07 | Plug As; (Hi Tempertature) | 1 |
267-9718 Pump Gp-Fuel Injection
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 21***39 | Filter Base Assembly; (24-Volt) | 1 |
| 26***18 | Pump Group-Fuel Injection | 1 |
183-2824 Pump Gp-Fuel Priming -Manual
| 15***36 | Cartridge | 1 |
| 17***00 | Seal; (Fuel) | 2 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
212-3657 Pump Gp-Fuel Prm & Water Sep -Electric
| 19***38 | Elbow Assem. | 0 |
| 21***57 | Pump Group-Fuel Prm & Water Sep; -Electric-Primary Filter | 1 |
| 23***43 | Regulator Group-Fuel Pressure | 1 |
309-6847 Pump Gp-Unit Injector Hyd
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
| 30***47 | Pump Group-Unit Injector Hydraulic | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
319-0657 Pump Gp-Unit Injector Hyd
| 28***78 | Tank Group-Fuel | 1 |
| 29***18 | Bracket | 1 |
| 29***19 | Bracket | 1 |
205-1306 Regulator Gp-Fuel Pressure
| 20***06 | Name-Plate (Portuguese), Regulator Group-Fuel Pressure | 1 |
| 28***80 | Tank Group-Fuel; -Fast Fill | 1 |
| 29***18 | Bracket | 1 |
232-0343 Regulator Gp-Fuel Pressure
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 28***44 | Tank Group-Fuel; -Steel Mill | 1 |
| 29***91 | Bracket As | 4 |
287-6780 Tank Gp-Fuel -Fast Fill
| 03***97 | Boot | 1 |
| 13***01 | Boot | 2 |
| 14***59 | Cable As | 1 |
287-6744 Tank Gp-Fuel -Steel Mill
| 14***39 | Connector As. | 2 |
| 14***10 | Plug As; (16.36mm Id) | 1 |
| 21***06 | Plug As; (Fuel Tank Drain) | 1 |
287-6778 Tank Gp-Fuel
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***44 | Coil Assem. | 1 |
284-5742 Tank Gp-Fuel
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 23***14 | Receptacle As-Connector; (3-Pin) | 1 |
| 25***72 | Cap As-Filler; (Fuel Tank) | 1 |
284-5744 Tank Gp-Fuel -Steel Mill
| 13***84 | Bolt-Hex Head | 1 |
| 14***39 | Connector As. | 2 |
| 14***10 | Plug As; (16.36mm Id) | 1 |
284-5743 Tank Gp-Fuel -Fast Fill
| 13***84 | Bolt-Hex Head | 1 |
| 14***39 | Connector As. | 2 |
| 14***10 | Plug As; (16.36mm Id) | 1 |
309-6639 Tank Gp-Fuel -Steel Mill
| 1D***17 | Nut,Plain,Hexagon Starter Motor Assembly | 3 |
| 30***39 | Tank Group-Fuel; -Steel Mill | 1 |
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
Hydraulic System
180-9419 Accumulator Gp-Hydraulic -Uncharged
| 18***19 | Accumulator Group-Hydraulic; -Uncharged | 1 |
| 18***63 | Plug Group | 1 |
| 28***47 | Manifold Group-Valve; -Inlet | 1 |
160-2669 Accumulator Gp-Hydraulic -Charged
| 14***10 | Plug As; (16.36mm Id) | 1 |
| 16***69 | Accumulator Group-Hydraulic; -Charged | 1 |
| 1U***27 | Guide-Valve | 1 |
331-8937 Accumulator Gp-Pilot Oil -Uncharged
| 18***63 | Plug Group | 1 |
| 23***95 | Rod | 4 |
| 28***47 | Manifold Group-Valve; -Inlet | 1 |
330-2062 Accumulator Gp-Pilot Oil -Charged
| 18***63 | Plug Group | 1 |
| 23***95 | Rod | 4 |
| 28***47 | Manifold Group-Valve; -Inlet | 1 |
257-7612 Control Ar-Hydraulic -Hydrostatic Drive, Brake
| 18***63 | Plug Group | 1 |
| 23***96 | Rod | 4 |
| 25***12 | Control Ar-Hydraulic; -Hydrostatic Drive, Brake | 1 |
308-7379 Cylinder Gp-Bucket -Multipurpose
| 16***54 | Seal-O-Ring | 1 |
| 30***79 | Cylinder Group-Bucket; -Multipurpose | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
294-5575 Cylinder Gp-Cab Tilt
| 17***68 | Seat | 1 |
| 17***69 | Poppet | 1 |
| 17***70 | Spring | 1 |
289-2080 Cylinder Gp-Lift -Lh
| 14***59 | Plug | 4 |
| 16***77 | Plug As | 2 |
| 16***19 | Plug As | 1 |
289-2079 Cylinder Gp-Lift -Rh
| 14***59 | Plug | 4 |
| 16***77 | Plug As | 2 |
| 16***19 | Plug As | 1 |
330-1145 Cylinder Gp-Ripper
| 09***31 | Orifice | 1 |
| 14***59 | Plug | 4 |
| 16***77 | Plug As | 2 |
333-0381 Cylinder Gp-Tilt -Rh
| 09***31 | Orifice | 1 |
| 14***59 | Plug | 4 |
| 16***77 | Plug As | 2 |
333-0382 Cylinder Gp-Tilt -Lh
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 20***71 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
| 20***73 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
291-9379 Guard Gp-Tilt Cylinder
| 19***64 | Valve Group-Control | 1 |
| 29***79 | Guard Group-Tilt Cylinder | 1 |
| 30***41 | Ring-Backup | 1 |
273-0750 Hydraulic Ar
| 24***56 | Kit-Seal; (Shuttle Valve)(Implement Control) | 1 |
| 27***50 | Hydraulic Ar | 1 |
| 3H***42 | Seal; (Included In Seal Kit) | 1 |
304-5563 Lines Gp-Bucket Cylinder
| 19***47 | Washer; (19.15x31.65x2.36-mm Thk) | 1 |
| 19***14 | Nut; (3/4-32-2b-Thd) | 1 |
| 30***63 | Lines Group-Bucket Cylinder | 1 |
287-5355 Lines Gp-Front
| 11***72 | Nut; (1/2-20-Thd) | 1 |
| 25***48 | Coil As; (24-Volt) | 1 |
| 28***55 | Lines Group-Front | 1 |
274-6729 Lines Gp-Hydraulic Oil Cooler
| 09***67 | Washer; (22x60x8-mm Thk) | 2 |
| 13***71 | Pin Assem. | 2 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 8 |
274-6734 Lines Gp-Lift Cylinder
| 21***44 | Washer; (103x180x1.5-mm Thk) | 8 |
| 22***71 | Ring | 12 |
| 27***34 | Lines Group-Lift Cylinder | 1 |
326-8573 Lines Gp-Pilot
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 2 |
| 12***97 | Knob; (Governor) | 2 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 13 |
306-3948 Lines Gp-Pilot
| 30***48 | Lines Group-Pilot | 1 |
| 30***74 | Accessory Group-Cab; -Steel Mill | 1 |
| 30***96 | Accessory Group-Cab | 1 |
306-3950 Lines Gp-Pilot
| 30***50 | Lines Group-Pilot | 1 |
| 30***96 | Accessory Group-Cab | 1 |
| 30***97 | Accessory Group-Cab | 1 |
306-3949 Lines Gp-Pilot
| 14***97 | Cap | 2 |
| 17***28 | Insulation; (290-cm) | 0 |
| 19***82 | Bumper As | 2 |
274-6737 Lines Gp-Pump
| 12***06 | Bumper As | 2 |
| 13***35 | Blade As-Wiper; (650-mm) | 1 |
| 14***97 | Cap | 4 |
287-5366 Lines Gp-Rear Attachment
| 22***93 | Seal; (80.5-cm) | 0 |
| 25***06 | Floor Mat | 1 |
| 25***09 | Floor Mat | 1 |
292-5324 Lines Gp-Rear Attachment
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 4 |
| 24***44 | Washer; (12.7x31.7x1-mm Thk) | 2 |
| 26***79 | Latch | 1 |
291-3636 Lines Gp-Ripper
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
| 18***07 | Orifice As-Air Conditioner | 1 |
274-6736 Lines Gp-Tilt
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
| 18***07 | Orifice As-Air Conditioner | 1 |
288-4049 Manifold Gp-Control -Outlet
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***97 | Valve As; (Low Side) | 1 |
| 10***99 | Valve As; (Air Conditioner Refrigerant) | 1 |
192-0729 Manifold Gp-Control -Hydraulic Fan
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***15 | Grommet | 1 |
| 13***93 | Bushing | 1 |
303-4646 Manifold Gp-Hydraulic -Implement
| 29***81 | Arm As; (Inner, Rh) | 1 |
| 29***84 | Arm As; (Inner, Lh) | 1 |
| 29***86 | Plate As | 1 |
288-4047 Manifold Gp-Valve -Inlet
| 28***47 | Manifold Group-Valve; -Inlet | 1 |
| 29***90 | Bearing | 1 |
| 29***05 | Arm As; (Outer, Rh) | 1 |
320-8388 Mounting Gp-Cylinder
| 29***90 | Bearing | 1 |
| 29***08 | Spacer | 1 |
| 29***12 | Arm; (Outer, Lh) | 1 |
274-6735 Mounting Gp-Hydraulic Tank
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 9 |
| 25***98 | Knob | 2 |
| 26***82 | Bracket | 1 |
288-3659 Mounting Gp-Valve
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 7 |
| 17***62 | Screw-Flat Head; (M8x1.25x40-mm) | 2 |
| 19***70 | Locknut; (3/8-16-Thd) | 1 |
290-9802 Pump Gp-Hand -Brake Release-Steel Mill
| 29***02 | Pump Group-Hand; -Brake Release-Steel Mill | 1 |
| 33***00 | Cab As-Rops | 1 |
290-4521 Pump Gp-Hand -Fuel Priming
| 25***29 | Mounting Group-Rops | 1 |
| 28***75 | Air Conditioner Group | 1 |
| 28***76 | Film Group | 1 |
324-3552 Pump Gp-Hand -Steel Mill
| 25***77 | Circuit Breaker Group | 1 |
| 30***94 | Lighting Group-Flood; -Steel Mill | 1 |
| 30***96 | Accessory Group-Cab; -Steel Mill | 1 |
282-4076 Pump Gp-Hand -Cab Tilt
| 25***29 | Mounting Group-Rops | 1 |
| 28***76 | Pump Group-Hand; -Cab Tilt | 1 |
| 28***43 | Door Group-Cab | 1 |
286-7884 Pump Gp-Piston -Implement
| 28***84 | Pump Group-Piston; -Implement | 1 |
| 30***85 | Insulation Group-Weather | 1 |
| 32***40 | Cab As-Rops | 1 |
279-6556 Tank Gp-Hydraulic
| 25***77 | Circuit Breaker Group | 1 |
| 27***56 | Tank Group-Hydraulic | 1 |
| 30***81 | Door Group-Cab; -Rh | 1 |
288-4062 Valve Gp-Bank 2 -Bucket Control
| 12***79 | Stud-Taperlock; (M8x1.25x130-mm) | 4 |
| 16***72 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
| 20***30 | Support As | 1 |
288-4063 Valve Gp-Bank 3 -Bucket Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 28***63 | Valve Group-Bank 3; -Bucket Control | 1 |
| 31***18 | Valve As-Pressure Relief; (Refrigerant Compressor) | 1 |
288-4064 Valve Gp-Bank 3 -Bucket Control, Ripper
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***72 | Seal; (135-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
288-4065 Valve Gp-Bank 4 -Bucket Control, Ripper
| 13***23 | Screw-Flat Head; (6-32x0.5-In) | 2 |
| 14***85 | Nut-Weld; (M10 X 1.5 Thd) | 1 |
| 25***98 | Knob | 1 |
175-2440 Valve Gp-Check
| 17***40 | Valve Group-Check; -Power Train Piston Motor | 1 |
| 28***40 | Cushion As | 1 |
| 28***41 | Bracket | 1 |
158-9956 Valve Gp-Check
| 15***56 | Valve Group-Check; -Pilot, Differential Lock Oil | 1 |
| 28***40 | Cushion As | 1 |
| 28***41 | Bracket | 1 |
288-4051 Valve Gp-Control -Ripper
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 2 |
| 23***09 | Plug As-Connector; (12-Pin) | 1 |
288-4058 Valve Gp-Control -Bucket Lift, Lower
| 14***31 | Cap-Push Button; (Yellow)(Transmission Hold) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
| 22***55 | Cap-Push Button; (Black) | 1 |
288-4054 Valve Gp-Control -Multipurpose Bucket
| 28***40 | Cushion As | 1 |
| 28***41 | Bracket | 1 |
| 28***42 | Bracket As | 1 |
288-4061 Valve Gp-Control -Bucket Tilt, Dump
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 27***65 | Boot | 1 |
| 27***67 | Retainer-Boot | 1 |
112-1817 Valve Gp-Manual -Dead Engine Lower
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 27***65 | Boot | 1 |
324-0028 Valve Gp-Pilot -Hydrostatic Drive
| 26***49 | Control & Mtg Group-Joystick; -Bucket-Bucket Lift, Tilt | 1 |
| 32***28 | Valve Group-Pilot; -Hydrostatic Drive | 1 |
247-0741 Valve Gp-Pilot -Joystick
| 24***41 | Valve Group-Pilot; -Joystick-Hydrostatic Drive | 1 |
| 29***19 | Control & Mtg Group-Elhyd; -Hydrostatic Drive, Steering | 1 |
| 30***24 | Control Group-Pedal; -Brake | 1 |
193-1665 Valve Gp-Pressure Reducing -Implement
| 19***65 | Valve Group-Pressure Reducing; -Signal Duplication | 1 |
| 28***50 | Control & Mtg Group-Joystick; -Multipurpose Bucket | 1 |
| 28***19 | Film-Instruction; (Bucket Controls)(Multipurpose) | 1 |
260-8590 Valve Gp-Shuttle -Implement
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 10 |
| 21***89 | Screw; (M4x25-mm) | 3 |
328-4314 Valve Gp-Solenoid
| 28***98 | Control & Mtg Group-Joystick; -Bucket | 1 |
| 28***00 | Film-Instruction; (Bucket Controls) | 1 |
| 32***14 | Valve Group-Solenoid; (Ride Control, Lift Cyl Rod End) | 1 |
313-7668 Valve Gp-Solenoid
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 21***89 | Screw; (M4x25-mm) | 3 |
Implements
277-2484 Control Gp-Bucket
| 27***84 | Control Group-Bucket | 1 |
| 28***65 | Film-Instruction; (Ripper Control) | 1 |
| 30***73 | Control Group-Handle; -Winch-Ripper, Winch-Ripper | 1 |
308-7458 Pin Gp-Bucket -Steel Mill
| 14***31 | Cap-Push Button; (Yellow)(Transmission Hold) | 2 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 19 |
309-4169 Pin Gp-Bucket
| 11***49 | Screw-Pan Head; (M5x0.8x30-mm) | 2 |
| 12***70 | Spring; (Lh) | 1 |
| 12***71 | Spring; (Rh) | 1 |
Lubrication System
190-3525 Filler Gp-Engine Oil
| 14***64 | Stud; (M8x1.25x35-mm) | 2 |
| 19***25 | Filler Group-Engine Oil | 1 |
| 1R***08 | Filter As-Engine Oil; (Advanced Efficiency)(High Efficiency) | 1 |
351-6638 Filler Gp-Engine Oil
| 29***34 | Hose | 1 |
| 29***35 | Hose | 1 |
| 29***36 | Manifold | 1 |
196-2427 Filter Gp-Engine Oil
| 19***10 | Hose-Fumes Disposal | 1 |
| 19***27 | Filter Group-Engine Oil | 1 |
| 29***38 | Bracket | 1 |
290-1433 Fumes Disposal Gp
| 11***64 | Clip-Loop | 1 |
| 19***31 | Bracket | 1 |
| 29***13 | Tube As | 1 |
290-1437 Fumes Disposal Gp
| 03***34 | Seal-O-Ring | 1 |
| 19***52 | Gasket | 1 |
| 20***82 | Bolt; (M8x1.25x25-mm) | 1 |
290-1412 Gauge Gp-Oil Level (Dipstick) -Engine
| 06***51 | Clamp | 1 |
| 14***16 | Connector Group | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
198-1319 Lines Gp-Engine Oil
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 18***99 | Connector As | 1 |
| 18***04 | Elbow As; (90 Degree) | 1 |
290-5602 Lines Gp-Oil Supply
| 11***27 | Fitting; (Quick Disconnect, Male) | 1 |
| 14***24 | Connector Group | 1 |
| 14***39 | Connector As. | 1 |
243-1048 Lines Gp-Turbocharger Oil
| 22***44 | Gear Assem.; (60 Teeth) | 1 |
| 24***48 | Lines Group-Turbocharger Oil | 1 |
| 33***05 | Pump As-Engine Oil | 1 |
301-2732 Oil Change Gp-High Speed
| 30***32 | Oil Change Group-High Speed | 1 |
| 6V***52 | Cap-Dust; (Fuel Supply Tee Connection) | 1 |
| 6V***65 | Fitting; (Quick Disconnect)(Transmission Oil) | 1 |
195-8098 Pump Gp-Engine Oil
| 11***03 | Kit-Seal; (Modulating Valve) | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 16***24 | Nut-Self-Locking; (1/2-28-Thd) | 1 |
198-0921 Valve Gp-Fluid Sampling -Engine Oil
| 19***21 | Valve Group-Fluid Sampling; -Engine Oil | 1 |
| 20***93 | Gasket | 1 |
| 29***67 | Core As-Oil Cooler; (Engine) | 1 |
176-5321 Valve Gp-Modulating -Hydraulic Fan
| 17***21 | Valve Group-Modulating; -Pilot Oil-Hydraulic Fan Oil | 1 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 20 |
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 4 |
Machine Arrangement
273-0747 Chassis Ar
| 27***47 | Chassis Ar | 1 |
| 27***00 | Frame Group-Loader | 1 |
| 27***84 | Control Group-Bucket | 1 |
273-0741 Common Ar
| 27***41 | Common Ar | 1 |
| 27***44 | Engine Ar | 1 |
| 27***47 | Chassis Ar | 1 |
347-3975 Option Ar-Bucket -Multipurpose
| 27***81 | Guard Group-Rear | 1 |
| 28***15 | Ripper Ar | 1 |
| 28***42 | Step Group | 1 |
347-3970 Option Ar-Bucket -General Purpose
| 25***78 | Lighting Group-Flood; -Cab Front, Rear | 1 |
| 25***06 | Guard Group-Lighting | 1 |
| 34***70 | Option Ar-Bucket; -General Purpose | 1 |
347-3976 Option Ar-Bucket -Multipurpose
| 28***42 | Step Group | 1 |
| 29***18 | Bar Group-Striker | 1 |
| 34***76 | Option Ar-Bucket; -Multipurpose | 1 |
347-3973 Option Ar-Bucket -Wide Gauge
| 13***52 | Roller Group-Track-Single Flange | 6 |
| 13***53 | Roller Group-Track-Double Flange | 8 |
| 21***74 | Segment Group-Sprocket | 2 |
347-3977 Option Ar-Bucket -Multipurpose
| 10***82 | Bolt-Socket Head; (M8x1.25x16-mm) | 1 |
| 13***52 | Roller Group-Track-Single Flange | 6 |
| 13***53 | Roller Group-Track-Double Flange | 8 |
347-3971 Option Ar-Bucket -General Purpose
| 13***52 | Roller Group-Track-Single Flange | 6 |
| 13***53 | Roller Group-Track-Double Flange | 8 |
| 21***74 | Segment Group-Sprocket | 2 |
347-3974 Option Ar-Bucket
| 29***21 | Pump Group-Hand; -Fuel Priming | 1 |
| 30***32 | Oil Change Group-High Speed | 1 |
| 34***74 | Option Ar-Bucket | 1 |
347-4000 Option Ar-Cab
| 25***50 | Tooth Group-Long; -K-90 | 1 |
| 29***00 | Bucket Group-General Purpose | 1 |
| 34***00 | Option Ar-Cab | 1 |
347-4010 Option Ar-Counterweight
| 26***44 | Tooth Group-Long; -K-90 | 1 |
| 30***21 | Bucket Group-General Purpose; -Flush Mounted Teeth | 1 |
| 34***10 | Option Ar-Counterweight | 1 |
347-3990 Option Ar-Guard
| 14***62 | Edge Group-Segment; -Heavy-Duty | 1 |
| 25***50 | Tooth Group-Long; -K-90 | 1 |
| 30***71 | Bucket Group-General Purpose; -Large Track | 1 |
347-4021 Option Ar-Hydraulic -Joystick Control, 3-Function
| 25***50 | Tooth Group-Long; -K-90 | 1 |
| 30***51 | Bucket Group-Multipurpose | 1 |
| 34***21 | Option Ar-Hydraulic; -Joystick Control, 3-Function | 1 |
347-4022 Option Ar-Hydraulic -Joystick Control, 3-Function
| 25***50 | Tooth Group-Long; -K-90 | 1 |
| 30***81 | Bucket Group-Multipurpose; -Extreme Service | 1 |
| 34***22 | Option Ar-Hydraulic; -Joystick Control, 3-Function | 1 |
347-4023 Option Ar-Hydraulic -Joystick Control, 4-Function
| 25***50 | Tooth Group-Long; -K-90 | 1 |
| 30***87 | Bucket Group-Multipurpose; -Waste Handling | 1 |
| 34***23 | Option Ar-Hydraulic; -Joystick Control, 4-Function | 1 |
347-4024 Option Ar-Hydraulic -Joystick Control
| 25***78 | Lighting Group-Flood; -Cab Front, Rear | 1 |
| 25***48 | Screen Group-Cab; -Windshield | 1 |
| 34***24 | Option Ar-Hydraulic; -Joystick Control | 1 |
347-4020 Option Ar-Hydraulic -Joystick Control, 2-Function
| 26***12 | Tooth Group-Short; -K-90 | 1 |
| 30***68 | Bucket Group-Heavy Duty | 1 |
| 34***20 | Option Ar-Hydraulic; -Joystick Control, 2-Function | 1 |
347-4001 Option Ar-Lighting
| 28***42 | Step Group | 1 |
| 29***09 | Counterweight Group | 1 |
| 34***01 | Option Ar-Lighting | 1 |
347-3950 Option Ar-Machine
| 27***81 | Guard Group-Rear | 1 |
| 28***49 | Bumper Group | 1 |
| 34***50 | Option Ar-Machine | 1 |
347-3953 Option Ar-Machine
| 25***43 | Seat Group-Suspension; -Cloth, Heated, Air | 1 |
| 25***44 | Control Group-Joystick; -Multipurpose Bucket | 1 |
| 28***55 | Lines Group-Front | 1 |
347-3954 Option Ar-Machine -Extreme Service
| 25***43 | Seat Group-Suspension; -Cloth, Heated, Air | 1 |
| 28***64 | Control Group-Joystick; -Bucket | 1 |
| 28***64 | Valve Group-Bank 3; -Bucket Control, Ripper | 1 |
347-3952 Option Ar-Machine
| 25***42 | Seat Group-Suspension; -Cloth, Air | 1 |
| 28***64 | Control Group-Joystick; -Bucket | 1 |
| 28***62 | Valve Group-Bank 2; -Bucket Control | 1 |
347-3995 Option Ar-Pump
| 25***43 | Seat Group-Suspension; -Cloth, Heated, Air | 1 |
| 25***44 | Control Group-Joystick; -Multipurpose Bucket | 1 |
| 28***55 | Lines Group-Front | 1 |
347-3992 Option Ar-Ripper
| 10***82 | Bolt-Socket Head; (M8x1.25x16-mm) | 1 |
| 13***52 | Roller Group-Track-Single Flange | 6 |
| 13***53 | Roller Group-Track-Double Flange | 8 |
347-4011 Option Ar-Striker Bar
| 25***42 | Seat Group-Suspension; -Cloth, Air | 1 |
| 25***45 | Control Group-Hydraulic Hand; -Bucket | 1 |
| 28***62 | Valve Group-Bank 2; -Bucket Control | 1 |
349-7212 Option Ar-Work Tool -Extra-Duty
| 25***75 | Tooth Group-Extra Duty; -K-90 | 1 |
| 34***12 | Option Ar-Work Tool; -Extra-Duty | 1 |
349-7210 Option Ar-Work Tool
| 10***69 | Edge Group-Cutting | 1 |
| 34***10 | Option Ar-Work Tool | 1 |
349-7213 Option Ar-Work Tool
| 25***51 | Tooth Group-Penetration; -K-90 | 1 |
| 34***13 | Option Ar-Work Tool | 1 |
349-7211 Option Ar-Work Tool
| 34***11 | Option Ar-Work Tool | 1 |
| 3G***26 | Bit & Cutting Edge Group | 1 |
284-8640 Steel Mill Ar
| 28***40 | Steel Mill Ar | 1 |
| 7X***63 | Bolt-Plt; (M20 X 2.5 X 60) | 2 |
| 8T***39 | Washer; (6.0mm Thk)(M21.5x6x45mm) | 2 |
347-3951 Steel Mill Ar
| 16***32 | Insulation; (155-cm Each) | 0 |
| 27***83 | Battery & Wiring Group | 1 |
| 28***47 | Guard Group-Lines | 1 |
Operator Station
327-7799 Accessory Gp-Cab
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 10 |
| 15***01 | Fastener-Hook & Loop | 1 |
| 24***69 | Retainer | 1 |
307-1396 Accessory Gp-Cab -Steel Mill
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 20***93 | Bolt; (M6x1x12-mm) | 2 |
| 25***81 | Seal | 1 |
307-2774 Accessory Gp-Cab -Steel Mill
| 23***25 | Control Group-Unprgmed Monitor; -Messenger | 1 |
| 30***74 | Accessory Group-Cab; -Steel Mill | 1 |
307-4287 Accessory Gp-Cab
| 14***30 | Retainer | 2 |
| 26***13 | Seal | 1 |
| 27***08 | Screw-Truss Head; (M5x0.8x10-mm) | 2 |
307-4297 Accessory Gp-Cab
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 10 |
| 15***01 | Fastener-Hook & Loop | 1 |
| 24***69 | Retainer | 1 |
307-4296 Accessory Gp-Cab
| 25***05 | Cover Group-Access; -Rh | 1 |
| 27***08 | Screw-Truss Head; (M5x0.8x10-mm) | 2 |
| 30***96 | Accessory Group-Cab | 1 |
294-7779 Adjuster Gp-Seat
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 12 |
| 16***73 | Louver As | 2 |
| 28***17 | Cover-Dash | 1 |
237-3970 Air Compressor Gp-Seat
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 19***75 | Washer-Hard; (6.6x15x6-mm Thk) | 2 |
| 23***70 | Air Compressor Group-Seat | 1 |
327-7797 Air Conditioner & Mounting Gp
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 4 |
| 22***93 | Seal; (80.5-cm) | 0 |
| 26***27 | Hinge As | 1 |
307-4286 Air Conditioner & Mounting Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 19***75 | Washer-Hard; (6.6x15x6-mm Thk) | 2 |
| 28***18 | Duct | 1 |
279-8843 Air Conditioner Gp
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 4 |
| 22***93 | Seal; (80.5-cm) | 0 |
| 26***27 | Hinge As | 1 |
289-1075 Air Conditioner Gp
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 4 |
| 26***27 | Hinge As | 1 |
| 27***23 | Lock As | 1 |
291-8011 Arm Gp-Seat Suspension -Outer, Lh
| 14***97 | Cap | 2 |
| 15***15 | Screw-Pan Head; (10-16x0.5-In) | 5 |
| 18***14 | Plate | 1 |
291-8004 Arm Gp-Seat Suspension -Outer, Rh
| 19***75 | Washer-Hard; (6.6x15x6-mm Thk) | 4 |
| 27***11 | Bracket As | 1 |
| 28***18 | Seal; (60-cm Each) | 0 |
291-7980 Arm Gp-Seat Suspension -Center
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 4 |
| 26***27 | Hinge As | 1 |
| 27***23 | Lock As | 1 |
284-7054 Armrest Gp -Rh
| 14***97 | Cap | 2 |
| 15***15 | Screw-Pan Head; (10-16x0.5-In) | 5 |
| 18***14 | Plate | 1 |
296-8302 Bracket Gp-Mounting -Lh
| 14***97 | Cap | 2 |
| 15***15 | Screw-Pan Head; (10-16x0.5-In) | 5 |
| 18***14 | Plate | 1 |
286-8238 Bracket Gp-Mounting -Lh
| 14***97 | Cap | 2 |
| 15***15 | Screw-Pan Head; (10-16x0.5-In) | 5 |
| 18***14 | Plate | 1 |
306-9908 Cab Ar -Steel Mill
| 28***18 | Duct | 1 |
| 28***12 | Plate As | 1 |
| 29***91 | Seal | 1 |
273-0752 Cab Ar
| 19***75 | Washer-Hard; (6.6x15x6-mm Thk) | 4 |
| 27***52 | Cab Ar | 1 |
| 27***11 | Bracket As | 1 |
307-1398 Cab Gp -Steel Mill
| 27***68 | Valve Group-Cab Heater | 1 |
| 28***57 | Coil As-Heater | 1 |
| 29***03 | Hose | 1 |
307-1399 Cab Gp -Steel Mill
| 10***55 | Cover-Speaker | 2 |
| 28***98 | Clip | 8 |
| 29***33 | Screw; (7-19x25-mm) | 8 |
327-7790 Cab Gp
| 10***55 | Cover-Speaker | 2 |
| 28***98 | Clip | 8 |
| 29***33 | Screw; (7-19x25-mm) | 8 |
334-6680 Cab Gp
| 29***69 | Insulation As; (Roof) | 1 |
| 29***75 | Washer; (Insulation Fastener)(Insulation) | 45 |
| 30***01 | Insulation As | 1 |
277-6067 Compressor & Mtg Gp-Refrig
| 27***67 | Compressor & Mtg Group-Refrig | 1 |
| 29***69 | Insulation As; (Roof) | 1 |
| 29***70 | Insulation As; (Lh) | 1 |
163-0872 Compressor Gp-Refrigerant
| 16***72 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
| 25***27 | Window Group-Cab; -Sealed | 1 |
| 32***88 | Mounting Group-Rops | 1 |
287-0554 Condenser Gp-Refrigerant
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 2 |
| 12***97 | Knob; (Governor) | 2 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 9 |
296-8319 Control & Mtg Gp-Elhyd -Hydrostatic Drive, Steering
| 10***93 | Valve As | 1 |
| 10***94 | Gasket | 1 |
| 10***95 | Valve As | 1 |
280-9673 Control & Mtg Gp-Joystick -Bucket
| 11***31 | Mount Assem. | 4 |
| 12***95 | Washer; (32x134x12-mm Thk) | 2 |
| 14***79 | Sleeve | 2 |
280-9450 Control & Mtg Gp-Joystick -Multipurpose Bucket
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 26***23 | Cap-Wiper | 1 |
282-6698 Control & Mtg Gp-Joystick -Bucket
| 27***44 | Washer-Special | 2 |
| 28***98 | Control & Mtg Group-Joystick; -Bucket | 1 |
| 32***96 | Pin | 2 |
268-9349 Control & Mtg Gp-Joystick -Bucket
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
268-9350 Control Gp-Direction & Speed -Hydrostatic Drive
| 16***83 | Knob-Lumbar | 1 |
| 21***29 | Plug | 3 |
| 26***50 | Control Group-Direction & Speed; -Hydrostatic Drive | 1 |
306-2126 Control Gp-Handle -Hydrostatic Drive, Steering
| 16***83 | Knob-Lumbar | 1 |
| 21***29 | Plug | 3 |
| 27***63 | Cushion As-Back | 1 |
307-4671 Control Gp-Handle -Lift, Lower, Dump, Tilt Back
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***07 | Holder | 1 |
307-4673 Control Gp-Handle -Ripper
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 6 |
| 21***14 | Switch As-Limit; (Seat Adjustment) | 1 |
| 26***59 | Spring | 1 |
303-4017 Control Gp-Hydraulic -Hydrostatic Drive, Steering
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 6 |
| 21***14 | Switch As-Limit; (Seat Adjustment) | 1 |
| 26***56 | Carrier As | 1 |
253-8445 Control Gp-Hydraulic Hand -Bucket
| 13***65 | Bumper | 1 |
| 20***28 | Harness As-Radio; (Fm) | 1 |
| 25***45 | Control Group-Hydraulic Hand; -Bucket | 1 |
284-9764 Control Gp-Joystick -Bucket
| 12***06 | Bumper As | 1 |
| 13***30 | Grommet | 1 |
| 17***22 | Latch As; (Yellow) | 1 |
253-8444 Control Gp-Joystick -Multipurpose Bucket
| 19***54 | Sleeve | 1 |
| 25***44 | Control Group-Joystick; -Multipurpose Bucket | 1 |
282-3145 Control Gp-Joystick -Bucket
| 25***59 | Slider As | 1 |
| 26***67 | Bracket As; (Lh) | 1 |
| 26***69 | Bracket As; (Rh) | 1 |
259-5673 Control Gp-Joystick -Multipurpose Bucket
| 19***54 | Sleeve | 1 |
| 25***73 | Control Group-Joystick; -Multipurpose Bucket | 1 |
292-3543 Control Gp-Joystick -Ripper
| 13***30 | Grommet | 1 |
| 19***66 | Washer-Hard; (11x25x10-mm Thk) | 2 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 4 |
304-4162 Control Gp-Joystick -Hydrostatic Drive, Steering
| 09***18 | Nut (M6x1.0 Thd) | 25 |
| 30***62 | Control Group-Joystick; -Hydrostatic Drive, Steering | 1 |
| 32***53 | Strip | 1 |
280-9179 Control Gp-Pedal -Speed Override, Brake
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 6 |
307-4324 Control Gp-Pedal -Brake
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 6 |
257-6175 Control Gp-Pedal -Steering, Brake
| 0T***89 | Cap Screw (2" Long) | 2 |
| 25***75 | Control Group-Pedal; -Steering, Brake | 1 |
| 27***03 | Spacer; (11.7x19.8x25.4-mm Thk) | 1 |
257-6176 Control Gp-Steering
| 25***47 | Seat Group-Suspension; -Cloth, Air | 1 |
| 25***76 | Control Group-Steering | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
304-4001 Control Gp-Unprgmed Monitor -Messenger
| 25***48 | Seat Group-Suspension; -Cloth, Heated, Air | 1 |
| 30***01 | Control Group-Unprgmed Monitor; -Messenger | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
284-9766 Cover Gp-Access -Rh
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 20***03 | Washer-Hard; (10.2x22.22x2.38-mm Thk) | 2 |
254-8605 Cover Gp-Access -Rh
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 20***03 | Washer-Hard; (10.2x22.22x2.38-mm Thk) | 2 |
307-4284 Cover Gp-Cab
| 16***98 | Seal-Lip Type | 2 |
| 1W***17 | Dowel-Hollow | 2 |
| 24***95 | Rod | 1 |
327-7795 Cover Gp-Cab
294-3132 Cover Gp-Dash
| 16***98 | Seal-Lip Type | 2 |
| 1W***17 | Dowel-Hollow | 2 |
| 24***95 | Rod | 1 |
327-7817 Dash Gp
| 20***82 | Cap-Vented; (Washer Tank) | 1 |
| 28***97 | Tank | 1 |
| 28***95 | Plate | 1 |
294-3127 Dash Gp
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 10***03 | Fastener | 19 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
290-5467 Door Gp-Access -Rh
| 28***87 | Seal; (45.5-Dm) | 0 |
| 28***93 | Plate | 1 |
| 28***96 | Bracket | 2 |
328-2773 Door Gp-Access -Lh-Steel Mill
| 29***25 | Window Group; -Steel Mill | 1 |
| 32***57 | Seal; (230-cm Each) | 0 |
| 32***80 | Seal; (230-cm Each) | 0 |
328-2772 Door Gp-Access -Rh-Steel Mill
| 31***12 | Window As; (Rh) | 1 |
| 31***13 | Shim 1.225 mm , Rear Axle, Window As; (Lh) | 1 |
| 31***99 | Glass-Sliding; (Rh) | 1 |
290-5468 Door Gp-Access -Lh
| 28***93 | Plate | 1 |
| 28***72 | Film-Identification; (Caterpillar)(Front Window) | 1 |
| 29***68 | Door Group-Access; -Lh | 1 |
287-6743 Door Gp-Cab
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 17***60 | Motor As-Window Wiper; (Rear) | 1 |
307-4281 Door Gp-Cab -Rh
| 10***87 | Plate-Identification; (Work Tool)(Bucket) | 1 |
| 21***87 | Hinge As; (Lift)(Outer, Lh) | 1 |
| 21***88 | Hinge As; (Lift)(Outer, Rh) | 1 |
307-4282 Door Gp-Cab -Lh
| 30***82 | Door Group-Cab; -Lh | 1 |
| 30***64 | Bucket As-General Purpose; -Waste Handling | 1 |
328-2771 Door Gp-Cab -Steel Mill
| 10***87 | Plate-Identification; (Work Tool)(Bucket) | 1 |
| 21***87 | Hinge As; (Lift)(Outer, Lh) | 1 |
| 21***88 | Hinge As; (Lift)(Outer, Rh) | 1 |
307-2768 Door Gp-Cab -Rh-Steel Mill
| 22***07 | Adapter-Tip; (K-100, Center) | 6 |
| 22***08 | Adapter-Tip; (K-100, Rh) | 1 |
| 22***09 | Adapter-Tip; (K-100, Lh) | 1 |
307-2769 Door Gp-Cab -Lh-Steel Mill
| 10***87 | Plate-Identification; (Work Tool)(Bucket) | 1 |
| 21***87 | Hinge As; (Lift)(Outer, Lh) | 1 |
| 21***88 | Hinge As; (Lift)(Outer, Rh) | 1 |
294-3128 Duct Gp-Cab Air
| 10***87 | Plate-Identification; (Work Tool)(Bucket) | 1 |
| 21***87 | Hinge As; (Lift)(Outer, Lh) | 1 |
| 21***88 | Hinge As; (Lift)(Outer, Rh) | 1 |
277-9969 Heater Gp-Cab
| 27***69 | Heater Group-Cab | 1 |
| 30***67 | Bucket As-Slag; -Steel Mill | 1 |
| 3G***67 | Bearing-Sleeve | 4 |
307-4288 Installation Gp-Radio
| 11***64 | Adapter; (2-Strap, Center) | 6 |
| 27***17 | Plate-Wear | 7 |
| 27***73 | Edge-Cutting | 5 |
327-7800 Installation Gp-Radio
| 29***75 | Bucket As-General Purpose | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 8 |
| 32***00 | Installation Group-Radio | 1 |
307-4285 Insulation Gp-Weather
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 16***72 | Plate-Information; (Multipurpose Bucket) | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 8 |
307-2775 Insulation Gp-Weather
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 8 |
| 30***75 | Insulation Group-Weather, Cover | 1 |
| 30***64 | Bucket As-General Purpose; -Flush Mounted Teeth | 1 |
327-7787 Kit-Cab
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 8 |
| 30***72 | Bucket As-General Purpose | 1 |
327-7798 Latch Gp
| 25***50 | Tooth Group-Long; -K-90 | 1 |
| 30***61 | Bucket Group-General Purpose; -Waste Handling | 1 |
| 32***98 | Latch Group | 1 |
303-4037 Lines Gp-Air Conditioner
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 16***72 | Plate-Information; (Multipurpose Bucket) | 1 |
| 22***97 | Adapter-Tip; (K-90, 2-Strap, Center) | 8 |
267-6281 Lines Gp-Heater
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 26***01 | Plate-Serial Number; (Bucket) | 1 |
| 26***81 | Lines Group-Heater | 1 |
146-6149 Motor Gp-Window Wiper -Front
| 14***49 | Motor Group-Window Wiper; -Front | 1 |
| 22***53 | Spacer Group | 1 |
| 22***55 | Block; (10-mm Thk) | 1 |
322-1492 Motor Gp-Window Wiper -Rear
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 16***72 | Plate-Information; (Multipurpose Bucket) | 1 |
327-7788 Mounting Gp-Rops
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 16***72 | Plate-Information; (Multipurpose Bucket) | 1 |
251-1929 Mounting Gp-Rops
| 22***53 | Spacer Group | 1 |
| 22***55 | Block; (10-mm Thk) | 1 |
| 22***56 | Block; (12-mm Thk) | 1 |
278-8516 Pan Gp-Backrest -Cloth, Heated
| 10***59 | Retainer As.-Ground Engaging Tool | 4 |
| 13***38 | Pin-G.E.T. | 4 |
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
278-8515 Pan Gp-Backrest -Cloth
| 22***53 | Spacer Group | 1 |
| 22***55 | Block; (10-mm Thk) | 1 |
| 22***56 | Block; (12-mm Thk) | 1 |
292-6402 Pan Gp-Backrest -Lumbar
| 29***02 | Pan Group-Backrest; -Lumbar | 1 |
| 2C***59 | Plate-Identification; (Cat) | 2 |
| 30***66 | Bulldozer As | 1 |
295-4475 Pan Gp-Seat -Cloth
| 22***21 | Plate | 2 |
| 29***75 | Pan Group-Seat; -Cloth | 1 |
| 2C***59 | Plate-Identification; (Cat) | 2 |
295-4476 Pan Gp-Seat -Cloth, Heated
| 29***76 | Pan Group-Seat; -Cloth, Heated | 1 |
| 30***91 | Bulldozer Group; -Waste Handling | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 4 |
331-5291 Radio Gp -Am/Fm/Wb/Cd Player
| 10***66 | Edge; (Segment) | 5 |
| 30***22 | Edge-Segment | 2 |
| 33***91 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
294-2006 Radio Gp -Am/Fm/Wb Cd Player
| 1U***06 | Edge-Cutting | 2 |
| 25***64 | Guard; (Corner, Rh)(Rh) | 1 |
| 25***65 | Guard; (Corner, Lh)(Lh) | 1 |
331-5292 Radio Gp -Am/Fm/Wb
| 10***68 | Edge-Cutting | 2 |
| 33***92 | Radio Group; -Am/Fm/Wb | 1 |
| 3G***95 | Edge - End | 2 |
284-8953 Radio Gp -Am/Fm/Wb Cd Player
| 1U***61 | Edge ( End ) | 2 |
| 1U***62 | Edge-Cutting | 2 |
| 25***66 | Guard-Bucket Corner; (Rh) | 1 |
250-3794 Radio Gp -Am/Fm/Wb
| 22***21 | Plate | 2 |
| 25***94 | Radio Group; -Am/Fm/Wb | 1 |
| 2C***59 | Plate-Identification; (Cat) | 2 |
262-0766 Recliner Gp-Seat
| 26***66 | Recliner Group-Seat | 1 |
| 30***23 | Edge-Segment | 2 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 14 |
334-4246 Screen Gp-Cab -Windshield-Steel Mill
| 19***17 | Plug | 2 |
| 24***69 | Plate & Film Group | 1 |
| 28***70 | Mounting Group-Ripper | 1 |
328-2751 Screen Gp-Cab -Windshield-Steel Mill
| 13***58 | Spacer; (90x140x14-mm Thk) | 2 |
| 20***06 | Spacer; (92x160x5-mm Thk) | 10 |
| 28***71 | Pin | 2 |
256-7248 Screen Gp-Cab -Windshield
| 14***70 | Edge-Segment; (Heavy-Duty) | 5 |
| 25***48 | Screen Group-Cab; -Windshield | 1 |
| 31***67 | Edge-Segment; (Heavy-Duty) | 2 |
272-2272 Seat Belt Gp -Retractable
| 18***51 | Washer; (70.08x114x12.7-mm Thk) | 2 |
| 21***17 | Washer; (71x140x1.5-mm Thk) | 20 |
| 27***72 | Seat Belt Group; -Retractable | 1 |
295-4435 Seat Gp -Cloth, Heated
| 22***90 | Retainer-G.E.T. | 8 |
| 22***91 | Tip-Extra-Duty; (K-90) | 8 |
| 22***97 | Adapter-Tip; (K-90, 2-Strap, Center) | 6 |
295-4434 Seat Gp -Cloth
| 10***69 | Retainer As-G.E.T. | 1 |
| 11***68 | Pin-G.E.T. | 1 |
| 29***34 | Seat Group; -Cloth | 1 |
255-8847 Seat Gp-Suspension -Cloth, Air
| 22***90 | Retainer-G.E.T. | 8 |
| 22***92 | Tip-Penetration; (K-90)(K-90) | 8 |
| 22***97 | Adapter-Tip; (K-90, 2-Strap, Center) | 6 |
253-8442 Seat Gp-Suspension -Cloth, Air
| 22***90 | Retainer-G.E.T. | 8 |
| 22***99 | Tip-General Purpose; (K-90) | 8 |
| 22***97 | Adapter-Tip; (K-90, 2-Strap, Center) | 6 |
253-8443 Seat Gp-Suspension -Cloth, Heated, Air
| 22***90 | Retainer-G.E.T. | 8 |
| 22***91 | Tip-Extra-Duty; (K-90) | 8 |
| 25***43 | Seat Group-Suspension; -Cloth, Heated, Air | 1 |
255-8848 Seat Gp-Suspension -Cloth, Heated, Air
| 11***58 | Pin; (G.E.T.) | 1 |
| 11***59 | Retainer Assembly; (G.E.T.) | 1 |
| 25***48 | Seat Group-Suspension; -Cloth, Heated, Air | 1 |
284-7055 Support Gp-Hydraulic Control -Rh
| 22***90 | Retainer-G.E.T. | 8 |
| 22***09 | Tip Group-General Purpose; (K-100) | 8 |
| 25***70 | Adapter Group-Tip; -K-100 | 1 |
298-2819 Support Gp-Seat -Suspension
| 22***90 | Retainer-G.E.T. | 10 |
| 22***99 | Tip-General Purpose; (K-90) | 10 |
| 29***19 | Support Group-Seat; -Suspension | 1 |
289-2078 Support Gp-Steering Control
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 14***26 | Plug | 2 |
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
298-2818 Suspension Gp-Seat -Air
| 25***61 | Film-Information; (Cat Power, Acert Technology) | 2 |
| 29***90 | Film-Identification; (Cat, Rh) | 1 |
| 29***18 | Suspension Group-Seat; -Air | 1 |
281-1296 Tank Gp-Window Washer
| 16***68 | Plate-Identification; (Sequence)(Open Rops) | 1 |
| 20***26 | Film-Instruction; (Machine Security, Console) | 1 |
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
334-6717 Window As-Front -Sealed
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 2 |
| 15***64 | Film; (Instruction) (Hydraulic Oil) (On Forward Of And Above The Hydraulic Tank Sight Gage On Tank Surface) | 1 |
| 19***86 | Film; (Safety) (To Right And Left Of Fuel Tank) | 2 |
290-8425 Window Gp -Steel Mill
| 22***17 | Film; (Warning) (Seatbelt) (On Lh Post Inside Cab) | 1 |
| 22***13 | Film; (Warning) (Jump Start) (Inside Of Lh Battery Box Cover) | 1 |
| 22***05 | Film; (Warning) (Universal) (On Lh Post Inside Cab) | 1 |
290-8426 Window Gp-Cab -Steel Mill
| 14***68 | Film-Identification; (Biodegradable Hydraulic Oil) | 1 |
| 29***26 | Window Group-Cab; -Steel Mill | 1 |
257-0627 Window Gp-Cab -Sealed
| 22***45 | Film-Warning; (Seat Belt, International) | 1 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
| 22***12 | Film; (Warning) (Jump Start) (On Outside Of Battery Compartment Door) | 1 |
327-7794 Wiper Gp-Window -Rear
| 32***94 | Wiper Group-Window; -Rear | 1 |
307-4283 Wiper Gp-Window
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 22***61 | Film-Instruction; (Cab Unlock) | 2 |
| 28***35 | Film-Identification; (Security) | 1 |
Power Train
290-5616 Drive Gp-Flexible Coupling
274-6727 Filter & Lines Gp-Power Train
302-7298 Filter Gp-Oil -Power Train
311-3154 Final Drive & Brake Gp -Steel Mill
306-9250 Final Drive & Brake Gp -Wide Gauge
274-7762 Final Drive & Brake Gp
291-2361 Final Drive & Brake Gp -Heavy-Duty
308-6969 Final Drive & Brake Gp -Steel Mill
324-0027 Head Gp-Motor -Hydrostatic Drive
274-6728 Lines Gp-Control
274-6726 Lines Gp-Drain
274-6732 Lines Gp-Hydrostatic
290-9785 Lines Gp-Hydrostatic -Steel Mill
274-6731 Lines Gp-Lubrication
290-6216 Lines Gp-Scavenge
274-6724 Motor & Mtg Gp-Travel -Hydrostatic Drive
288-5474 Motor Gp-Piston -Hydrostatic Drive, Lh
310-9365 Motor Gp-Piston -Hydrostatic Drive, Rh
273-0748 Power Train Ar
274-6725 Pump & Mtg Gp-Power Train -Hydrostatic Drive
292-9233 Pump Gp-Gear -Scavenge
310-9364 Pump Gp-Piston -Hydrostatic Drive, Rh
288-5473 Pump Gp-Piston -Hydrostatic Drive, Lh
313-3412 Pump Gp-Piston -Hydrostatic Drive, Rh
323-9460 Rotating Gp-Motor -Hydrostatic Drive
215-7174 Segment Gp-Sprocket
| 21***74 | Segment Group-Sprocket | 1 |
| 32***48 | Guard As-Cylinder | 2 |
| 5P***49 | Washer (For Non-R.O.P.S. & Rollover Group) | 8 |
211-8158 Valve Gp-Bypass -Brake Release
| 21***58 | Valve Group-Bypass; -Hydrostatic Pump | 1 |
| 30***81 | Guard As-Top; (Top Inner, Rh) | 1 |
| 30***82 | Guard As-Top; (Top Inner, Lh) | 1 |
324-0030 Valve Gp-Flushing -Hydrostatic Drive
| 30***83 | Guard As; (Bottom Inner, Rh) | 1 |
| 30***84 | Guard As-Bottom; (Inner, Lh) | 1 |
| 32***30 | Valve Group-Flushing; -Hydrostatic Drive | 1 |
Service Equipment And Supplies
327-7805 Film Gp
| 32***05 | Film Group | 1 |
291-4202 Film Gp
| 29***02 | Film Group | 1 |
289-1076 Film Gp
| 28***76 | Film Group | 1 |
291-0267 Plate & Film Gp -Nacd
| 29***67 | Plate & Film Group; -Nacd | 1 |
291-2357 Plate & Film Gp -Steel Mill
| 29***57 | Plate & Film Group; -Steel Mill | 1 |
291-0268 Plate & Film Gp -International
| 29***68 | Plate & Film Group; -International | 1 |
327-7789 Plate & Film Gp
| 32***89 | Plate & Film Group | 1 |
291-0266 Plate & Film Gp
| 29***66 | Plate & Film Group | 1 |
292-1851 Plate & Film Gp -Biodegradable Hydraulic Oil
| 29***51 | Plate & Film Group; -Biodegradable Hydraulic Oil | 1 |
Steering And Braking System
321-3446 Kit-Hydraulic Control -Retrofit
| 1K***70 | Nut (National Coarse) | 2 |
| 32***46 | Kit-Hydraulic Control; -Retrofit | 1 |
| 7K***05 | Seal-Lip; (63.5mm Id) | 4 |
274-6723 Lines Gp-Brake
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 15***03 | Clamp-Hose | 1 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 4 |
290-3150 Lines Gp-Brake -Steel Mill
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 10 |
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 8 |
| 22***05 | Spacer; (18x38x40-mm Thk) | 4 |
314-9276 Manifold & Valve Gp -Hydrostatic Drive
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 12***97 | Knob; (Governor) | 1 |
| 12***06 | Tee-O-Ring | 1 |
288-0491 Manifold & Valve Gp -Hydrostatic Drive
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***61 | Elbow Group | 1 |
| 18***24 | Pump Group-Fuel Priming; -Manual | 1 |
290-3158 Valve Gp-Control -Brake Release
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***61 | Elbow Group | 1 |
| 17***28 | Insulation; (290-cm) | 0 |
252-2237 Valve Gp-Solenoid
| 13***35 | Seal-O-Ring | 1 |
| 25***37 | Valve Group-Solenoid | 1 |
| 30***81 | Idler Shaft, Pump Group-Piston; (Front) | 1 |
Undercarriage
306-9243 Bar Gp-Equalizer -Wide Gauge
| 29***14 | Link As-Track | 1 |
| 30***43 | Bar Group-Equalizer; -Wide Gauge | 1 |
| 6Y***06 | Shoe-Track; (500 Flat) | 20 |
348-3815 Bar Gp-Equalizer
| 14***67 | Hose As | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
287-2330 Bar Gp-Equalizer
| 28***30 | Bar Group-Equalizer | 1 |
| 29***14 | Link As-Track | 1 |
| 6Y***06 | Shoe-Track; (500 Flat) | 40 |
348-3818 Bar Gp-Equalizer
| 09***24 | Spacer; (11x19x58-mm Thk) | 1 |
| 12***45 | Screen As; (Steering Tank) | 1 |
| 14***28 | Connector Assem. | 1 |
346-2874 Bar Gp-Equalizer
| 30***17 | Control Group-Hydraulic; -Hydrostatic Drive, Steering | 1 |
| 32***27 | Wiring Group-Cab | 1 |
| 34***74 | Bar Group-Equalizer | 1 |
308-6201 Bar Gp-Equalizer -Steel Mill
| 29***12 | Link As-Track | 1 |
| 30***01 | Bar Group-Equalizer; -Steel Mill | 1 |
| 32***70 | Shoe-Track Master | 1 |
9w-4477 Cap Gp-Track Idler
| 20***60 | Adapter | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 4 |
| 31***76 | Manifold & Valve Group; -Hydrostatic Drive | 1 |
291-5797 Frame Gp-Track Roller
| 10***93 | Poppet | 2 |
| 21***03 | Plug As | 2 |
| 21***04 | Spring | 2 |
308-4736 Frame Gp-Track Roller -Steel Mill
| 17***91 | Stud-Weld; (M10x1.5x35-mm Oal) | 1 |
| 18***58 | Valve As; (Brake Release) | 1 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 4 |
291-5795 Guard Gp-Track Guide
| 24***81 | Flange | 1 |
| 24***12 | Kit-Seal; (Solenoid Valve) | 1 |
| 29***95 | Guard Group-Track Guide | 1 |
308-4619 Guard Gp-Track Roller
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
| 16***79 | Cap; (Accumulator) | 1 |
| 16***80 | Core | 1 |
309-6690 Idler Gp -Heavy Duty
| 16***95 | Seal As-Buffer | 1 |
| 16***04 | Seal-U-Cup | 1 |
| 1D***27 | Bolt,Machine Head Mtg Uoc:Bsv,Bsx | 4 |
304-7685 Idler Gp -Steel Mill
| 24***01 | Film-Warning; (Accum, High Press, Read Omm) | 2 |
| 30***85 | Idler Group; -Steel Mill | 1 |
| 31***39 | Cap | 1 |
291-5798 Idler Gp
| 24***01 | Film-Warning; (Accum, High Press, Read Omm) | 1 |
| 29***98 | Idler Group | 1 |
291-9931 Idler Gp-Track
| 08***50 | Ring; (Back Up) | 1 |
| 09***79 | Pin-Spring | 1 |
| 09***35 | Seal-O-Ring (Id=149.60mm) | 1 |
309-1281 Idler Gp-Track -Steel Mill
| 08***50 | Ring; (Back Up) | 1 |
| 09***35 | Seal-O-Ring (Id=149.60mm) | 1 |
| 11***44 | Ring | 1 |
291-1612 Link As-Track
| 09***79 | Pin-Spring | 1 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
| 09***54 | Ring; (Buck Up) | 1 |
152-8054 Link As-Track -Rotating Bushing Track
| 09***67 | Setscrew-Socket; (M10x1.5-Thd) | 1 |
| 11***19 | Ring | 1 |
| 15***54 | Link As-Track; -Rotating Bushing Track | 1 |
291-1614 Link As-Track
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
| 09***54 | Ring; (Buck Up) | 1 |
| 11***19 | Ring | 1 |
306-9247 Pivot Bar Gp -Wide Gauge
| 27***34 | Lines Group-Lift Cylinder | 1 |
| 27***35 | Mounting Group-Hydraulic Tank | 1 |
| 27***36 | Lines Group-Tilt | 1 |
5q-5552 Pivot Bar Gp
| 27***93 | Spacer | 4 |
| 29***81 | Plate As | 2 |
| 29***82 | Plate As | 2 |
2p-3514 Roller Gp-Track Carrier -Steel Mill
| 14***17 | Adapter, -12 Orb / -16 Orfs | 2 |
| 14***27 | Connector Group | 4 |
| 14***08 | Plug As. | 2 |
235-5974 Roller Gp-Track Carrier -Heavy-Duty, Systemone
| 14***38 | Elbow | 1 |
| 15***44 | Elbow As | 2 |
| 17***61 | Elbow Group | 2 |
5q-7593 Roller Gp-Track-Double Flange -Steel Mill
| 10***66 | Clip; (50.8mm Id) | 3 |
| 17***91 | Stud-Weld; (M10x1.5x35-mm Oal) | 1 |
| 17***11 | Elbow | 1 |
238-7860 Roller Gp-Track-Double Flange
| 14***25 | Connector As. | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
312-8367 Roller Gp-Track-Double Flange -Steel Mill
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
| 15***29 | Tee As | 1 |
134-6453 Roller Gp-Track-Double Flange
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 13***53 | Roller Group-Track-Double Flange | 1 |
134-6452 Roller Gp-Track-Single Flange
| 13***52 | Roller Group-Track-Single Flange | 1 |
| 14***25 | Connector As. | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
238-7861 Roller Gp-Track-Single Flange
| 14***67 | Clamp; (Hose) | 6 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 3 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
5q-7592 Roller Gp-Track-Single Flange -Steel Mill
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
| 14***65 | Elbow | 1 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
312-8366 Roller Gp-Track-Single Flange -Steel Mill
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***90 | Clip; (Slot) | 4 |
291-5796 Spring Gp-Recoil
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***90 | Clip; (Slot) | 4 |
291-9694 Spring Gp-Recoil
| 14***41 | Connector Group | 4 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 2 |
269-1134 Track Gp -2-Required
| 14***08 | Plug As. | 1 |
| 16***80 | Plug As. | 3 |
| 26***34 | Track Group; -2-Required | 1 |
237-7323 Track Gp -2-Required
| 15***37 | Elbow Group | 2 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 4 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
247-1473 Track Gp -2-Required
| 15***56 | Valve Group-Check; -Pilot, Differential Lock Oil | 1 |
| 16***77 | Plug As | 5 |
| 17***93 | Plug As | 10 |
237-9143 Track Gp -2 Required
| 17***16 | Manifold As | 1 |
| 17***21 | Valve Group-Modulating; -Pilot Oil-Hydraulic Fan Oil | 1 |
| 23***43 | Track Group; -2 Required | 1 |
327-3572 Track Gp -2-Required
| 09***31 | Orifice | 1 |
| 14***95 | Plug As | 1 |
| 16***77 | Plug As | 1 |
Work Tools
257-1770 Adapter Gp-Tip -K-100
| 25***70 | Adapter Group-Tip; -K-100 | 1 |
1u-0763 Edge Gp-Bit & Cutting
| 1U***63 | Bit & Cutting Edge Group | 1 |
3g-5126 Edge Gp-Bit & Cutting
| 3G***26 | Bit & Cutting Edge Group | 1 |
357-7897 Bucket Ar-General Purpose
| 35***97 | Bucket Ar-General Purpose | 1 |
309-4270 Bucket As-General Purpose -Heavy-Duty
| 30***70 | Bucket As-General Purpose; -Heavy-Duty | 1 |
292-8875 Bucket As-General Purpose
| 29***75 | Bucket As-General Purpose | 1 |
309-4264 Bucket As-General Purpose -Waste Handling
| 30***64 | Bucket As-General Purpose; -Waste Handling | 1 |
309-4272 Bucket As-General Purpose
| 30***72 | Bucket As-General Purpose | 1 |
309-1464 Bucket As-General Purpose -Flush Mounted Teeth
| 30***64 | Bucket As-General Purpose; -Flush Mounted Teeth | 1 |
309-4263 Bucket As-General Purpose -Waste Handling
| 30***63 | Bucket As-General Purpose; -Waste Handling | 1 |
309-4267 Bucket As-Slag -Steel Mill
| 30***67 | Bucket As-Slag; -Steel Mill | 1 |
309-4266 Bucket As-Slag -Steel Mill
| 30***66 | Bucket As-Slag; -Steel Mill | 1 |
347-3972 Bucket Gp-General Purpose -Waste Handling
| 34***72 | Bucket Group-General Purpose; -Waste Handling | 1 |
309-4261 Bucket Gp-General Purpose -Waste Handling
| 30***61 | Bucket Group-General Purpose; -Waste Handling | 1 |
309-4271 Bucket Gp-General Purpose -Large Track
| 30***71 | Bucket Group-General Purpose; -Large Track | 1 |
308-4121 Bucket Gp-General Purpose -Flush Mounted Teeth
| 30***21 | Bucket Group-General Purpose; -Flush Mounted Teeth | 1 |
290-1100 Bucket Gp-General Purpose
| 29***00 | Bucket Group-General Purpose | 1 |
309-4268 Bucket Gp-Heavy Duty
| 30***68 | Bucket Group-Heavy Duty | 1 |
301-1081 Bucket Gp-Multipurpose -Extreme Service
| 30***81 | Bucket Group-Multipurpose; -Extreme Service | 1 |
301-1087 Bucket Gp-Multipurpose -Waste Handling
| 30***87 | Bucket Group-Multipurpose; -Waste Handling | 1 |
301-1056 Bucket Gp-Multipurpose
| 30***56 | Bucket Group-Multipurpose | 1 |
301-1051 Bucket Gp-Multipurpose
| 30***51 | Bucket Group-Multipurpose | 1 |
301-1083 Bucket Gp-Multipurpose -Extreme Service
| 30***83 | Bucket Group-Multipurpose; -Extreme Service | 1 |
301-1089 Bucket Gp-Multipurpose -Waste Handling
| 30***89 | Bucket Group-Multipurpose; -Waste Handling | 1 |
309-4265 Bucket Gp-Slag -Steel Mill
| 30***65 | Bucket Group-Slag; -Steel Mill | 1 |
301-1058 Bulldozer Gp -Multipurpose
| 30***58 | Bulldozer Group; -Multipurpose | 1 |
301-1091 Bulldozer Gp -Waste Handling
| 30***91 | Bulldozer Group; -Waste Handling | 1 |
301-1084 Bulldozer Gp -Multipurpose-Extreme Service
| 30***84 | Bulldozer Group; -Multipurpose-Extreme Service | 1 |
301-1090 Bulldozer Gp -Multipurpose-Waste Handling
| 30***90 | Bulldozer Group; -Multipurpose-Waste Handling | 1 |
275-5407 Edge Gp-Cutting
| 27***07 | Edge Group-Cutting | 1 |
100-6667 Edge Gp-Cutting
| 10***67 | Edge Group-Cutting | 1 |
100-6669 Edge Gp-Cutting
| 10***69 | Edge Group-Cutting | 1 |
143-3062 Edge Gp-Segment -Heavy-Duty
| 14***62 | Edge Group-Segment; -Heavy-Duty | 1 |
6y-7237 Edge Gp-Segment
| 6Y***37 | Edge Group-Segment | 1 |
289-8370 Mounting Gp-Ripper
| 28***70 | Mounting Group-Ripper | 1 |
283-7915 Ripper Ar
| 28***15 | Ripper Ar | 1 |
289-8400 Ripper Gp
| 28***00 | Ripper Group | 1 |
8e-3758 Tip Gp-Abrasion -Heavy-Duty
| 8E***58 | Tip Group-Abrasion; -J-460, Heavy-Duty | 1 |
257-1775 Tooth Gp-Extra Duty -K-90
| 25***75 | Tooth Group-Extra Duty; -K-90 | 1 |
268-4344 Tooth Gp-Long -K-90
| 26***44 | Tooth Group-Long; -K-90 | 1 |
257-1750 Tooth Gp-Long -K-90
| 25***50 | Tooth Group-Long; -K-90 | 1 |
257-1751 Tooth Gp-Penetration -K-90
| 25***51 | Tooth Group-Penetration; -K-90 | 1 |
9j-8926 Tooth Gp-Ripper -Curved
| 9J***26 | Tooth Group-Ripper; -Curved | 1 |
269-4612 Tooth Gp-Short -K-90
| 26***12 | Tooth Group-Short; -K-90 | 1 |
269-4611 Tooth Gp-Short -K-100
| 26***11 | Tooth Group-Short; -K-100 | 1 |
973D serial number reference
The PIN plate is a stamped metal plate riveted to the frame on the left side, on the loader-tower support arm just ahead of the cab; the same PIN is also stamped directly into the frame steel next to the plate as a tamper cross-check against a swapped plate. On the 973D the full PIN reads as CAT plus a model code and configuration digit, followed by the 3-letter serial prefix and an 8-character serial number (e.g. LCP00108); LCP is the prefix that identifies the 973D build series.
| Prefix | Identifies | Notes |
|---|---|---|
| LCP | 973D Track-Type Loader — Std, LGP/Wide-Gauge, Waste Handler (WH) and Shiphold/Port Handling (SH) configurations | Only documented serial prefix for the 973D, covering the model line from LCP1 (00001) up. Powered by the Cat C9 ACERT diesel, about 196 kW (263 hp) net flywheel, with electronically controlled Hystat hydrostatic drive that powers and controls each track independently. Steering is by joystick or, on some units, foot pedal working with the transmission controller. The mainframe (single-fabrication design), Z-bar loader linkage and oscillating undercarriage carry over from the 973C, with the C9 upgraded to ACERT for emissions compliance on the D. Std configuration uses standard track gauge; the factory Low-Ground-Pressure/Wide-Gauge package (stretched track gauge, LGP shoes and a wider bucket) is an option on the same LCP-prefixed chassis, not a separate serial series. Waste Handler (WH), Shiphold/Port Handling (SH) and Steel-Mill guarding/attachment packages are built on the same 973D base machine; no distinct prefix is documented for them in available listings, so treat them as LCP-series units and confirm with dealer if a unit's plate shows otherwise. Production runs roughly from the late 2000s into the mid-2010s for Std/LGP/Wide-Gauge, with the SH package continuing somewhat later, before the 973 line transitioned to the K-series. |
Frequently asked questions
What engine does the Caterpillar 973D use?
The 973D runs the Cat C9 ACERT, an 8.8 L six-cylinder diesel rated at 196 kW (263 hp) at 1900 rpm, with HEUI electronic fuel injection and ADEM ECM control. It meets Tier 3/Stage IIIA/Japan MOC emissions with no aftertreatment or DEF system. This engine is documented across both the standard Track Loader and Waste Handler factory literature, replacing the older mechanical 3306-family engine used in the 973C predecessor.
What is the operating weight of the Caterpillar 973D?
Operating weight runs about 28,058 kg (61,857 lb) for the Standard Track Loader and about 29,555 kg (65,157 lb) for the Waste Handler package, with the full range across bucket and configuration choices spanning roughly 27,699-29,553 kg (61,066-65,153 lb). Treat any single figure as configuration-dependent and confirm against the data plate and order specification.
What replaced the Caterpillar 973D?
Cat's next generation in this size class is the 973K, following the same letter-skip pattern Cat used elsewhere in its track loader line (973C to 973D to 973K, mirroring the smaller 963D to 963K step). Treat the 973K as a separate design with its own engine and controls rather than a parts-interchangeable D-series unit.
What 973D owners discuss
How does the 973D's Hystat drive change how it behaves compared to an older torque-converter powershift track loader?
The electronically controlled Hystat system on the 973D drives each track through its own variable-displacement pump and motor circuit, with no torque converter or powershift gearset in the loop. Owners note this gives infinitely variable ground speed, smooth directional changes, and true counter-rotation for tight spins, plus the ability to power both tracks through a turn instead of clutching one side like older drivetrains. One quirk operators flag: if the machine shows drive on one track only, or refuses to propel while every other function (lift, tilt, engine) still works fine, that usually points to the park brake failing to release rather than a damaged pump or motor - commonly traced to low charge pressure, contaminated hydrostatic oil, or a stuck park-brake solenoid. Because an unreleased or unexpectedly releasing park brake is a safety item, have your dealer verify brake release pressure before putting the machine back to work.
What undercarriage wear patterns should I expect on a 973D given how heavy this machine is?
As one of the heaviest machines in the track-loader class, owners report the idler and forward rollers take the brunt of wear because so much static and dynamic weight sits over the bucket end during loading. The oscillating track-roller-frame design is generally praised for smoothing ground shock and reducing pin-and-bushing pounding compared to a rigid frame, but sprocket segments, track pads, and idler bearings still wear faster than on a similarly sized dozer because the machine spends more time counter-rotating and cross-loading the tracks during load-and-carry cycles. Community consensus is to price remaining undercarriage life into any deal rather than judge it by eye, since wear item replacement on a machine this size adds up quickly.
Are there known quirks with the C9 ACERT engine used in the 973D?
The 973D runs the C9 ACERT diesel, rated around 196 kW (263 hp) net, a hydraulically actuated electronically controlled unit injector (HEUI) design shared across several Cat construction and on-highway platforms. Across that engine family, the most frequently reported quirks are: injectors and the HEUI pump are sensitive to fuel contamination and will lose power or smoke before failing outright; injector replacement generally needs correct trim codes programmed into the ECM, or the engine idles rough and stays down on power even with good injectors installed; and metal shed from a failing HEUI pump can take out injectors downstream, so a pump found making metal warrants a full fuel-system inspection rather than just an injector swap. None of this is unique to the 973D chassis - it comes with the shared engine platform, so keep fuel cleanliness and filtration intervals tight.
What electrical or sensor issues come up on Hystat-drive Cat track loaders like the 973D?
The recurring theme across Cat's electronically controlled Hystat lineup is drive-motor speed-sensor faults: the ECM needs a clean frequency signal from each drive motor's speed sensor to control propel smoothly, and when that signal drops out the machine will fault or hunt instead of driving cleanly. Mechanics report the sensor itself is rarely the actual failure - more often it's corrosion or a pinched or broken wire at the connector between the sensor and the main harness. Cleaning the sensor nose and reseating or replacing the connector resolves the fault more often than replacing the sensor outright. Because these faults sit in the propulsion control loop, have your dealer verify the repair with an active test drive and a code check before relying on the machine in tight quarters.
Do owners prefer the joystick or pedal steering setup on the 973D?
Operators are split, and it shows up repeatedly in community discussion. The pedal ("V") layout separates direction from steering, which owners find precise for fine grading and edge work, but working the pedals for steering all day can leave an operator with leg fatigue by the end of a shift. The single-joystick option combines direction and steering in one hand, cutting leg fatigue, but several operators say it is less precise for feathering a turn and can bring on wrist strain over a long day. The general consensus is that preference comes down to what the operator learned on first rather than one layout being objectively better.
What kind of fuel consumption should I expect running a 973D all day?
Owners describe the 973 platform as thirsty relative to a comparable wheel loader or a smaller Cat track loader, which tracks with a roughly 196 kW (263 hp) engine moving a heavy machine through load-and-carry or push work all day. Reported burn rates vary a lot by duty cycle, material, and operating technique, so treat any single number as anecdotal rather than a spec - plan fuel budgets closer to a large dozer than a mid-size wheel loader.
What should I check before buying a used 973D?
Community advice converges on the same short list. Pull an actual undercarriage wear percentage instead of trusting a visual "still has life in it" impression, since segment, roller, and idler wear on a machine this heavy adds up fast. Check the color and smell of the hydrostatic drive oil - dark or burnt-smelling oil is a red flag for internal pump or motor wear. Verify the machine powers and steers evenly in both directions and across a slope, not just in a straight line on flat ground, since weak propel on one side more often points to a hydrostat or park-brake problem than an engine issue. Ask for service records and a recent fluid sample analysis rather than relying on the hour meter and paint condition. Because propel and brake faults can be masked as "just needs a service," have your dealer verify hydrostatic charge pressure and park-brake release before you commit to the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 973D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.