Caterpillartrack-type loadertrack loader
Caterpillar 963D
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 963D is a mid-size track-type (crawler) loader built for truck loading, land clearing, and slope work in the size class between Cat's 953 and 973 loaders. It runs the Cat C6.6 ACERT six-cylinder diesel, a common-rail engine rated around 141 kW (189 hp) at 2000 rpm and certified to Tier 3/Stage IIIA emissions, replacing the 3126B engine used in the preceding 963C. Operating weight falls in the low-20-tonne range, roughly 20,220 kg (44,577 lb), though exact weight shifts with bucket choice, counterweight, and track shoe width. The 963D followed the 963C in the mid-2000s Cat lineup and was built into the early-to-mid 2010s depending on market, before giving way to the Tier-4 963K; sources differ on the exact first and last production year, so treat any single date as approximate and verify by serial number. Cat offered the 963D with general-purpose or multi-purpose (4-in-1) buckets, a choice of joystick or two-lever implement controls, and standard or wide low-ground-pressure track shoes.
Across the 963 lineage, each letter step brought a power and technology jump on the same basic chassis: the 963C's 3126B gave way to the 963D's larger-displacement, common-rail C6.6 ACERT with more horsepower and electro-hydraulic implement controls, a tiltable cab for easier service access, and the sealed, reduced-maintenance SystemOne undercarriage; the follow-on 963K then moved to the C7.1 ACERT and Tier 4 emissions controls. For today's used and parts market, the 963D sits in a useful middle ground: strong breakout force and bucket capacity for its size, a Tier 3 engine with no aftertreatment or DEF system to maintain, and a well-proven SystemOne undercarriage that still commands a resale premium when recently replaced. Parts commonality with other C6.6-equipped Cat machines of the same era keeps engine and hydraulic component sourcing reasonably straightforward, which is a large part of why well-maintained 963Ds continue to change hands steadily on the secondary market.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 963D specifications
Engine
| Engine model | Cat C6.6 ACERT, 6.6 L (403 in³) displacement, 6-cylinder in-line, common rail fuel system, ADEM A4 electronic control, turbocharged with air-to-air aftercooling (ATAAC) |
| Net/flywheel power | 141 kW (189 hp) at 2000 rpm, consistent across Caterpillar, ISO 9249, SAE J1349 and EEC 80/1269 measurement standards |
| Bore x stroke | 105 mm x 127 mm (4.13 in x 5.0 in) |
| Emissions | Meets U.S. EPA Tier 3, EU Stage IIIA and Japan Ministry of Land, Infrastructure & Transport Step 3 standards |
| Series/generation notes | 963D is a single generation between the 963C and 963K. No engine change is documented within the 963D production run; the machine carries the Cat C6.6 ACERT at 189 hp throughout. Do not mix with 963 (Cat 3306 engine), 963B or 963C, which use different engines. |
Weights (by configuration)
| Standard, GP bucket, no teeth | 20 220 kg (44,577 lb) |
| GP bucket with long teeth & segments | 20 592 kg (45,398 lb) |
| GP bucket with bolt-on cutting edge | 20 433 kg (45,047 lb) |
| MP bucket, no teeth | 20 710 kg (45,658 lb) |
| MP bucket with long teeth & segments | 20 975 kg (46,242 lb) |
| MP bucket with bolt-on edge | 20 911 kg (46,101 lb) |
| Flush-mounted-teeth bucket configuration | 20 332 kg (44,824 lb) |
| Shipping weight without bucket | 18 330-18 385 kg (40,411-40,532 lb) depending on lift-arm/linkage set, with 10% fuel, no operator, no bucket pins |
| 963D WH Waste Handler (reinforced landfill/waste spec) | 21 000 kg (46,297 lb) |
| 963D SH special-application variant (shiphold/trim-blade arrangement) | Approximately 21,428 kg (47,236 lb) with GP bucket and teeth; approximately 21,203 kg (46,740 lb) with trim blade. Reported by a single secondary source only, not confirmed in factory literature; treat as approximate. |
| Configuration note | 963D has no Std/XL/LGP naming. Configuration differences are by bucket type (GP, MP, GP Landfill, MP Landfill, flush-mount teeth), track shoe width (standard 550 mm/21.6 in, narrow 450 mm/17.7 in, wide-gauge 800 mm/31.5 in), and special arrangement (WH waste handler, shiphold, wide gauge) |
Dimensions
| Overall length, bucket on ground (GP bucket, extra-duty teeth) | 6941 mm (273.3 in); ranges 6584-7013 mm (259.2-276.1 in) across bucket/teeth options |
| Length to front of track | 4749 mm (187 in) |
| Machine height to top of cab | 3335 mm (131.3 in) |
| Overall machine height, bucket fully raised | 5402 mm (212.7 in); 5308 mm (208.9 in) with MP bucket |
| Height to bucket hinge pin | 3940 mm (155.1 in) |
| Height to top of seat with headrest | 2790 mm (109.8 in) |
| Height to top of exhaust stack | 2953 mm (116.3 in) |
| Ground clearance | 471 mm (18.5 in) |
| Overall machine width without bucket | Standard 550 mm (21.6 in) shoes: 2280 mm (89.7 in); narrow 450 mm (17.7 in) shoes: 2180 mm (85.8 in); WH waste-handler guarding package widens this to 2400 mm (94.5 in) / 2300 mm (90.6 in) respectively |
| Track gauge | 1850 mm (72.8 in) standard; widened by 250 mm (9.8 in) to about 2100 mm (82.6 in) under the optional Wide Gauge special arrangement |
| Track shoe width options | Standard double-grouser 550 mm (21.6 in); optional narrow double-grouser 450 mm (17.7 in); optional single-grouser extreme-service 560 mm (22 in); Wide Gauge special shoe 800 mm (31.5 in) |
| Track on ground | 2542 mm (100 in) |
| Grouser height (double grouser) | 42 mm (1.65 in) |
| Digging depth | 80-209 mm (3.1-8.2 in) depending on bucket type and teeth/edge |
| Bucket width overall (at cutting edge) | GP bucket 2612 mm (102.8 in), range 2508-2612 mm (98.7-102.8 in) across teeth options; MP bucket 2575 mm (101.3 in), range 2482-2575 mm (97.7-101.3 in) |
| Approach/rollback/dump angles | Carry position approach angle 15 deg; grading angle max 63 deg; max rollback at ground 43-45 deg; max rollback at carry 50-52 deg; max rollback fully raised 52 deg; max dump fully raised 53 deg (43 deg for MP bucket) |
Performance
| Drive system and travel speed | Closed-loop hydrostatic drive, electronically controlled (EHC), infinitely variable between zero and top speed rather than fixed gears. Maximum travel speed is 10 km/h (6.2 mph) in "travel" mode; a separate lower-range "work" mode trades top speed for finer control. A fuel-management setting lets the operator select a lower engine rpm for reverse, but full speed is achievable in all settings - Cat does not publish separate forward vs reverse top-speed figures for this machine |
| Drawbar pull / gradeability | Not published for this model. Caterpillar does not rate this track loader for drawbar pull or percent gradeability the way it rates track-type tractors (dozers); verify with your dealer if this data is required for a specific application. |
| Ground pressure | Standard 550 mm shoe: 70.9 kPa (10.3 psi). Optional narrow 450 mm shoe: 85.5 kPa (12.4 psi). Optional Wide Gauge arrangement (800 mm shoe, widened gauge): 53 kPa (7.7 psi). The 963D SH special-application variant is listed by an independent dealer spec sheet at 10.9 psi standard shoe / 13.2 psi optional shoe - modestly higher than base-model figures, reflecting added special-application weight; treat as variant-specific and not factory-confirmed |
| Ground contact area | Standard shoe 2.8 m² (4,340 in²); optional narrow shoe 2.3 m² (3,565 in²) |
| Breakout force (tilt cylinders, at ground) | 189,538-208,658 N (42,609-46,908 lbf) depending on bucket and teeth/edge configuration; GP bucket with no teeth is rated at 208,658 N (46,908 lbf) |
| Static tipping load (full fuel, 75 kg/165 lb operator) | 14,124-14,969 kg (31,138-33,001 lb) depending on bucket and teeth/edge configuration |
| Lift capacity to full lift height, bucket racked | 8152-8803 kg (17,972-19,407 lb) depending on configuration |
| Lift capacity at ground line, bucket racked | 17,888-19,300 kg (39,436-42,549 lb) depending on configuration |
| Hydraulic relief valve settings | Hydrostatic drive circuit: 47,500 kPa (6,890 psi). Implement/main hydraulic circuit: 27,500 kPa (3,989 psi) |
| Implement hydraulic pump output | 209 L/min (55.2 gal/min); closed-center, load-sensing piston-type system |
| Bucket cycle times | Lift 5.7 sec; power down 3.7 sec; float down 2.0 sec; dump at max height from full rackback 1.3 sec; rackback at max height from full dump 1.5 sec |
| Sound levels | Operator equivalent sound pressure (ANSI/SAE J1166) 80 dB(A); operator sound pressure (ISO 6396) 76 dB(A); exterior at 15 m (SAE J88) 80 dB(A); labeled sound power (2000/14/EC) 111 dB(A) - all measured with cab doors/windows closed |
Buckets and Blade Options
| Machine type note | The 963D is a bucket-equipped track loader, not a blade-equipped track-type tractor. The S/SU/A/VPAT dozer-blade naming convention belongs to Cat D-series track-type tractors and does not apply to this model |
| General Purpose (GP) bucket | Heaped capacity 2.45 m³ (3.2 yd³); struck capacity 2.14 m³ (2.79 yd³); width 2612 mm (102.8 in). Designed for hard bank excavating, stripping and stockpile loading |
| Multi-Purpose (MP) bucket | Heaped capacity 1.9 m³ (2.48 yd³); struck capacity 1.6 m³ (2.09 yd³); width 2575 mm (101.3 in). Combines the functions of a standard bucket, a dozer blade and a clamp for loading, stripping topsoil, clearing, bulldozing and grading |
| General Purpose Landfill bucket (integrated trash rack) | Heaped capacity approximately 3.1 m³ (4.05 yd³) per the 963D WH waste-handler literature |
| Multi-Purpose Landfill bucket (trash rack) | Heaped capacity approximately 2.7 m³ (3.5 yd³) per the 963D WH waste-handler literature |
| Flush-mounted-teeth GP bucket variant | Heaped capacity 2.45 m³ (3.2 yd³); width 2583 mm (101.6 in) |
| Straight Trim Blade attachment | Offered as a dealer-installed work tool; no capacity or dimensional specification is published in the factory literature reviewed |
| Multi-shank radial ripper-scarifier attachment | 3 shank pockets; overall beam width 1950 mm (76.7 in); ripping width 1836 mm (72.3 in); penetration 295 mm (11.6 in); ground clearance 595 mm (23.4 in); intended for frozen ground, asphalt and easily ripped rock |
| Other work tools offered | Side-dump buckets, refuse buckets, pallet forks, extendible material-handling arms and quick couplers, per dealer |
Service Capacities
| Fuel tank | 400 L (105.6 gal) |
| Cooling system | 31.5 L (8.3 gal) |
| Engine crankcase, with filter | 16.5 L (4.4 gal) |
| Each final drive | 15 L (4 gal) |
| Hydraulic tank | 90 L (23.7 gal) |
| Pivot shaft | 1.8 L (0.5 gal) |
| Factory-fill hydraulic oil | Cat HYDO Advanced 10 (bio-based hydraulic oil offered as an option) |
| Factory-fill coolant | Cat Extended Life Coolant |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
963D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 16.5-16.7 L (4.4 US gal) | Cat DEO or Cat DEO-ULS Diesel Engine Oil, multigrade. Engine is the Cat C6.6 ACERT (6.6 L, inline-6, common rail, Tier 3/Stage IIIA). Viscosity grade set by ambient temperature at cold start, per Cat's engine oil chart: SAE 0W-30 down to -40C(-40F), up to 30C(86F); SAE 0W-40 to 40C(104F); SAE 10W-30 from -18C(0F) to 40C(104F); SAE 15W-40 from -9.5C(15F) up to 50C(122F). Use the highest viscosity the climate allows. |
| Cooling system | 31.4-31.5 L (8.3 US gal) | Cat ELC (Extended Life Coolant), factory standard fill. Supplied premixed 1:1 with water; premix gives freeze protection to about -37C (-34F). Follow standard ELC extender service interval rather than a full-fluid change on the base OMM schedule. |
| Fuel tank | 399.7-400 L (105.6 US gal) | Ultra low sulfur diesel (ULSD, 15 ppm S max) to match Tier 3/Stage IIIA emissions controls. B20 biodiesel blend (up to 20% by volume) is acceptable if the biodiesel stock meets ASTM D6751 or EN 14214 and the blend meets ASTM D7467. Optional fast-fill tank fitting does not change tank volume. |
| Transmission / powertrain | No separate transmission or bevel-gear/steering-clutch capacity is published for this machine | The 963D does not use a dozer-style powershift transmission with bevel-gear steering clutches. It runs a closed-loop hydrostatic drive with Electro Hydrostatic Control (EHC), giving travel and work speed modes; the drive circuit draws from the main hydraulic reservoir rather than a separate transmission sump (see hydraulic system row). Where a pump-drive/splitter gearbox is fitted ahead of the hydrostatic pumps on this class of track loader, Cat guidance calls for engine oil (Cat DEO/DEO-ULS/DEO SYN family), not TDTO, graded by ambient temperature from SAE 0W-20 (cold climates) up to SAE 15W-40 (hot climates). |
| Final drives (each side) | 15-15.2 L (4.0 US gal) per side | Cat TDTO (Transmission/Drive Train Oil, Cat TO-4/TO-4M spec) or Cat TDTO-TMS/Cat Arctic TDTO; commercial TO-4 oil is an accepted alternate. Cat's lubricant table for track-type loader final drives grades the oil by climate: as cold as SAE 0W-20 (to about -40C/-40F) up through SAE 50 for sustained ambient temperatures near 50C (122F). Do not substitute straight gear oil (Cat GO) - it is not compatible with the wet friction material in these compartments. |
| Hydraulic system / tank | 89.7-90 L (23.7 US gal) | Cat HYDO Advanced 10 (SAE 10W), factory standard fill, preferred for ambient temperatures of about -20C to 40C (-4F to 104F). Accepted alternates include Cat HYDO, Cat MTO, Cat DEO/DEO-ULS/DEO SYN, and Cat TDTO/Arctic TDTO/TDTO-TMS, graded from SAE 0W-20 in cold climates up to SAE 30 in hot climates; commercial oils meeting Cat ECF or TO-4/TO-4M specs are third-choice options. This reservoir also supplies the closed-loop hydrostatic drive circuit. |
| Pivot shaft (oscillating track-frame pivot) | 1.8-1.9 L (0.5 US gal) | Cat TDTO family oil, per Cat's lubricant table for track-roller-frame recoil spring and pivot shaft bearings: Cat TDTO-TMS around SAE 10W for -30C to 0C, stepping up to SAE 30 (-20C to 25C) and SAE 50 for sustained ambient up to 50C (122F). Commercial TO-4 oil is an accepted alternate. |
| Grease (bucket, linkage, and cylinder pin points) | Not specified as a refill volume - serviced via grease gun at fittings, not a sump fill | Cat Multipurpose Grease, NLGI grade 2, as the standard-duty factory recommendation. The SystemOne undercarriage track rollers, carrier rollers, and idlers are sealed and lifetime-lubricated (no field grease points); the track adjuster/recoil-spring assembly is factory grease-filled. For sustained extreme cold, Cat Arctic Platinum Grease is the cold-climate substitute; for sustained extreme heat, Cat Desert Gold Grease is the hot-climate substitute. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 963D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 963D beyond the schedule
Predictive Maintenance & Fluid Analysis
Run Cat S·O·S sampling on the C6.6 ACERT's engine oil, the load-sensing hydraulic circuit, and the powershift transmission and final drives at every scheduled interval. Fuel dilution or metal in the engine sample flags common-rail injector or turbo wear early. Track coolant ELC additive levels since the Tier 3 aftercooled engine runs harder than the 963C's 3126B. Log SystemOne track link and bushing wear trends against hours so undercarriage replacement is scheduled, not reactive.
Corrective & Common Repairs
Common 963D failures center on electro-hydraulic joystick and kickout sensor faults, worn tilt-cylinder and lift-arm pivot pins, and SystemOne bushing wear from abrasive load-and-carry cycles. Final drive output seals weep after high hours and need reseal before oil contamination reaches the planetary gears. On the C6.6 ACERT, check common-rail injectors and the high-pressure pump first for hard starting or power loss. Torque converter stall speed complaints usually trace to worn powershift clutch packs, not the converter itself.
Overhaul & Rebuild Points
Major rebuild points on the 963D cluster around the powertrain: reman or overhaul the C6.6 ACERT top end (injectors, turbo, aftercooler) once oil analysis shows rising wear metals. Rebuild the powershift transmission and torque converter as a unit rather than piecemeal. Final drive planetaries and the bent-axis track drive motors are the next major spend, followed by a full SystemOne track group when link and bushing wear passes serviceable limits. Budget mainframe and loader-arm pin bore inspection at the same time.
Seasonal & Environment Servicing
Cold-climate 963Ds need a block heater and winter-grade fuel with anti-gel additive for the C6.6 ACERT; there is no DEF system to protect since this is a Tier 3 engine. Check ELC freeze protection with a test strip before winter and load-test batteries. In hot, dusty applications clean radiator and hydraulic oil cooler fins often and inspect the cab pressurizer filter. Sand and abrasive spoil accelerate SystemOne bushing wear, so shorten track inspection intervals. In wet sites, grease tilt-cab pins more often and check final drive seals for water ingress.
963D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 306-9199 | Filter As-Fuel | Fuel system service | Check fitment → |
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 252-5001 | Filter Element As-Air | Air intake service | Check fitment → |
| 252-5002 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
963D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 030-0248-02 | Cat Data Link not communicating: the monitor module (MID 030) is not receiving expected data from another module on the machine's Cat Data Link. | Break, corrosion, or loose pin in the data link harness between the monitor and the source module, or a module that has lost power or dropped off the link. | Check data link wiring and connectors for damage or corrosion, confirm all modules have battery power and ground, then clear the code with Cat ET and recheck for recurrence. |
| 079-0168-04 | Electrical system (battery) voltage below normal, as reported by the transmission/hydrostatic drive control module. | Weak or discharged battery, loose or corroded battery cable, slipping or worn alternator belt, or a failing alternator. | Load-test the battery, clean and tighten battery and ground connections, check belt tension, and test alternator output at rated engine speed. |
| 079-0168-03 | Electrical system (battery) voltage above normal, as reported by the transmission/hydrostatic drive control module. | Faulty voltage regulator inside the alternator causing overcharge, or a poor ground allowing voltage spikes. | Test charging voltage at the battery with the engine running; repair or replace the alternator if voltage exceeds spec, and verify main grounds. |
| 036-0342-11 | Secondary engine speed/timing sensor fault that does not fit the standard voltage, current, or frequency failure categories (an unclassified/other fault on that circuit). | Damaged sensor wiring, a failed secondary speed/timing sensor, or an incorrect air gap between the sensor and the timing wheel; sometimes triggered alongside other concurrent faults. | Inspect the sensor and connector for damage, check the sensor air gap against spec, review other active/logged codes on Cat ET for a related root cause, and replace the sensor if the fault does not clear. |
| 030-0096-03 | Fuel level sensor voltage above normal, reported by the monitor module. | Open circuit or short to a supply voltage in the fuel level sender wiring, or a failed sender unit in the tank. | Inspect the sender wiring and connector, test sender resistance against spec, and replace the sender if it is out of range. |
| 030-0324-05 | Current below normal on the action/warning lamp circuit on the operator's monitor panel. | Open circuit, blown bulb, or bad connector feeding the action lamp. | Check the lamp, bulb, and wiring for the action lamp circuit, repair the open, and confirm the lamp illuminates during the monitor's power-up self-test. |
| 036-0296-09 | Abnormal update rate on the transmission control data reported to/from the engine ECM: expected transmission-related data is not being exchanged within the expected time. | Intermittent data link wiring fault, a module reset, or a communication interruption between the engine ECM and the transmission/hydrostatic drive control module. | Check data link harness and connectors, verify module software levels match, then clear and recheck the code after repair. |
| 079-0132-08 | Abnormal frequency on the transmission pilot pressure supply sensor circuit. | Damaged sensor wiring, a failing pressure sensor, or electrical noise on the sensor signal circuit. | Inspect sensor wiring and connector, test the sensor against spec, and replace the sensor if the signal remains erratic. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
963D attachments & work tools
Blades (S/SU/A/VPAT)
The 963D is a track loader, not a dozer, so Caterpillar's SAE S/SU/A blade classes and VPAT are not part of its catalog. The nearest factory option is the Multi-Purpose (MP) bucket, which combines standard-bucket, dozer-blade and clamp function in one tool (width around 2575 mm / 101.3 in, capacity roughly 1.9-2.7 m3 / 2.5-3.5 yd3 depending on trash-rack version). A dealer-supplied Straight Trim Blade is also listed as an additional work tool beyond the cataloged buckets and ripper, for grading/trim work; no true angled or variable-pitch dozer blade is factory-cataloged for this model.
Rippers
One radial ripper-scarifier is cataloged, pinned into each side of the mainframe and raised/lowered by two cylinders; the beam carries three shank pockets, so it can run as a single-shank or multi-shank setup depending on how many pockets are fitted (optional equipment also lists a distinct multi-shank ripper option). It is rated for frozen ground, asphalt and easily-ripped rock only, not heavy rock ripping. Beam width is about 1950 mm (76.7 in), penetration 295 mm (11.6 in), ripping width 1836 mm (72.3 in), and it adds roughly 610 mm (24 in) to machine length in transport position; a published shank/beam weight is not documented for this specific model in factory literature.
Winches
No winch option is listed anywhere in the 963D's standard or optional equipment tables. Factory winches on this platform's family are a large dozer (track-type tractor) accessory, not a cataloged option for the 963D track loader; treat any winch fitment on a 963D as a non-factory or custom dealer arrangement and verify separately.
Drawbars / Counterweights
Optional equipment includes a standard hitch and a drawbar hitch for towing/pull work, plus light and additional counterweight packages for rear ballast tuning. On the base machine, the rear-mounted engine itself doubles as a working counterweight, balancing the machine against full bucket loads without adding dead weight.
Cab/ROPS guarding (forestry/waste configs)
No dedicated forestry guarding package is documented for the 963D; the cataloged special-application arrangements are Waste Handling/Demolition, Transfer Station, Shiphold and Wide-Gauge. The Waste Handler (963D WH) bundle adds an idler guard with debris scrapers, final-drive seal guards, idler seal-protection rings, lift-line and lift/tilt cylinder guards, impact-resistant front cab glass, extra working lights, a turbine air pre-cleaner, sealed sheet metal, a hydraulic reversing fan, hinged/latching grille, a heavy-duty rear bumper, rear striker bars, and a choice of double-grouser, single-grouser or center-hole track for debris shedding. Separate optional guards cover the idler, track rollers, cab lights, lift lines and a windshield screen. The standard cab itself is a pressurized, sound-suppressed ROPS/FOPS structure meeting SAE J1040/ISO 3471 (ROPS) and SAE/ISO 3449 Level II (FOPS).
Hydraulic arrangement (front/rear tools)
Base implement hydraulics are closed-center, load-sensing/piston type, rated at 209 L/min (55.2 gal/min) with a main relief setting near 27 500 kPa (3,989 psi); the separate hydrostatic drive circuit relieves around 47 500 kPa (6,890 psi). Front and rear work-tool plumbing is ordered as distinct optional kits: lines to the front for the Multi-Purpose bucket's clamp function, lines to the rear for the ripper, or a combined front-and-rear kit when both a front tool and rear ripper are run together.
All 963D assemblies by section
Every catalogued assembly group for the Caterpillar 963D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
242-9496 Air Cleaner Gp
| 10***51 | Bolt; (M8x1.25x65-mm) | 1 |
| 11***59 | Bolt; (M10x1.5x35-mm) | 2 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
266-9247 Air Cleaner Gp
| 10***51 | Bolt; (M8x1.25x65-mm) | 1 |
| 11***59 | Bolt; (M10x1.5x35-mm) | 2 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
240-8552 Air Cleaner Gp
| 1P***09 | Clip 15.9 mm (.62 In.) Dia. | 1 |
| 22***95 | Bracket Assem. | 1 |
| 24***52 | Air Cleaner Group | 1 |
242-9495 Lines Gp-Air
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***00 | Seal-O-Ring | 1 |
| 23***20 | Sensor Group-Speed; (Secondary, Timing) | 1 |
333-3864 Manifold Gp-Inlet
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 19***52 | Seal-O-Ring | 1 |
280-1292 Manifold Gp-Inlet -Air
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 15***76 | Mount-Isolation | 8 |
| 19***52 | Seal-O-Ring | 1 |
256-3451 Muffler Gp
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 19***52 | Seal-O-Ring | 1 |
240-8551 Pipe Gp-Exhaust -Short
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 16***62 | Washer | 2 |
292-3566 Precleaner Gp -Cab
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***72 | Fitting-Fuel | 1 |
| 22***00 | Seal-O-Ring | 2 |
301-2716 Precleaner Gp
| 06***39 | Seal-O-Ring | 1 |
| 18***23 | Pump As-Fuel Priming | 1 |
| 22***18 | Valve As; (Fuel Priming Pump) | 2 |
277-8717 Shield Gp-Air Cleaner
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***61 | Elbow Group | 1 |
| 18***24 | Pump Group-Fuel Priming; -Manual | 1 |
289-8272 Turbocharger Gp
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 21***39 | Filter Base Assembly; (24-Volt) | 1 |
| 28***72 | Turbocharger Group | 1 |
Basic Engine
282-2391 Camshaft Gp
| 27***51 | Plate-Lifting | 1 |
| 27***52 | Plate-Lifting | 1 |
| 28***91 | Camshaft Group | 1 |
277-4224 Cover Gp-Engine -Pto
| 20***34 | Bolt; (M20x2.5x120-mm) | 4 |
| 24***47 | Support-Engine | 2 |
| 27***24 | Cover Group-Engine; -Auxiliary Drive | 1 |
305-8963 Cover Gp-Valve Mechanism
| 23***11 | Clip-Pipe | 1 |
| 25***36 | Tube As | 1 |
| 27***84 | Gasket | 1 |
280-2024 Cover Gp-Valve Mechanism
| 18***55 | Clip | 1 |
| 23***11 | Clip-Pipe | 1 |
| 25***87 | Seal-O-Ring | 1 |
282-1835 Crankshaft Gp
| 27***00 | Plug-Shaft End | 1 |
| 27***01 | Circlip | 1 |
| 27***06 | Spring-Shaft | 5 |
282-1768 Cylinder Block Gp
| 28***11 | Rocker Arm Group | 1 |
| 28***68 | Cylinder Block Group | 1 |
| 33***97 | Link | 12 |
306-6845 Cylinder Block Gp
| 27***11 | Breather As; (Crankcase) | 1 |
| 30***45 | Cylinder Block Group | 1 |
309-6663 Cylinder Head As
| 11***04 | Seal-O-Ring | 1 |
| 13***88 | Cap-Oil Filler; (Engine) | 1 |
| 27***74 | Plate As-Blk | 1 |
276-8115 Cylinder Head As
| 11***04 | Seal-O-Ring | 1 |
| 13***88 | Cap-Oil Filler; (Engine) | 1 |
| 27***15 | Cylinder Head As | 1 |
282-2340 Cylinder Head Gp
| 14***27 | Connector Group | 1 |
| 27***04 | Hose As | 1 |
| 28***71 | Plate | 1 |
239-0099 Drain Gp-Engine Oil
| 23***99 | Drain Group-Engine Oil | 1 |
| 31***45 | Pump-Oil; (Engine) | 1 |
| 6I***90 | Bolt; (M8x1.25x40-mm) | 4 |
279-9255 Flywheel Gp
| 19***67 | Seal-O-Ring | 1 |
| 21***33 | Valve As-Fluid Sampling | 1 |
| 23***61 | Plug; (Blanking) | 1 |
243-2150 Guard Gp-Belt -Alternator, Compressor
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***17 | Washer | 4 |
| 10***47 | Washer | 4 |
279-8846 Housing Gp-Flywheel
| 13***56 | Elbow | 2 |
| 27***46 | Housing Group-Flywheel | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 2 |
277-3014 Housing Gp-Front
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 12***08 | Clip | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
279-9653 Lifting Gp-Engine
| 11***29 | Bolt; (M8x1.25x75-mm) | 7 |
| 22***38 | Seal-O-Ring | 1 |
| 22***19 | Gasket | 1 |
256-3464 Lifting Gp-Engine
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 4 |
| 25***64 | Lifting Group-Engine | 1 |
| 27***94 | Plate-Strip | 2 |
277-4541 Mounting Gp-Engine
| 11***29 | Bolt; (M8x1.25x75-mm) | 7 |
| 22***38 | Seal-O-Ring | 1 |
| 22***19 | Gasket | 1 |
301-2715 Mounting Gp-Engine & Xmsn
| 11***13 | Bolt-Hex Head; (M16x2x70mm) | 2 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 8 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 8 |
305-7297 Pan Gp-Oil
| 25***27 | Cap As-Coolant Tank; (Radiator) | 1 |
| 27***37 | Tank Group-Coolant | 1 |
| 30***04 | Film-Instruction; (Maximum Coolant Level) | 1 |
280-1379 Pan Gp-Oil
| 12***99 | Bolt; (M10x1.5x40-mm) | 2 |
| 27***74 | Regulator As-Water Temperature; (Connector Included) | 1 |
| 28***79 | Pan Group-Oil | 1 |
282-2223 Piston & Rod Gp
| 24***32 | Bolt-Tee; (M10x1x80.8-mm) | 1 |
| 25***01 | Filter Element As-Air; (Primary) | 1 |
| 25***02 | Filter Element As-Air; (Secondary) | 1 |
274-1929 Pulley Gp-Crankshaft
| 10***51 | Hose | 1 |
| 13***98 | Clip | 1 |
| 14***85 | Clamp | 1 |
280-1911 Rocker Arm Gp
| 23***30 | Gasket-Inlet | 1 |
| 28***91 | Elbow As | 1 |
| 28***11 | Rocker Arm Group | 1 |
282-2369 Valve Mechanism Gp
| 23***88 | Gasket-Inlet | 1 |
| 27***02 | Dowel | 2 |
| 27***28 | Gasket-Manifold | 1 |
Cooling System
277-2504 Cooler Gp-Engine Oil
| 03***47 | Ferrule | 3 |
| 03***14 | Nut; (7/16-In) | 1 |
| 06***07 | Plug | 1 |
288-4011 Fitting Gp-Water Lines
| 10***73 | Clip | 2 |
| 12***63 | Adapter Group-Fast Fill Fuel; (Auto Shutoff) | 1 |
| 16***12 | Connector As | 2 |
270-4207 Lines Gp-Water
| 27***07 | Lines Group-Water | 1 |
| 27***43 | Cap-Fuel Filler; (Lockable) | 1 |
| 27***89 | Boot-Fuel Cap | 1 |
270-4205 Plate Gp -Radiator
| 25***83 | Switch Group-Pressure; -Fuel Filter, Differential-Fuel Filter | 1 |
| 27***05 | Plate Group; -Radiator | 1 |
| 27***38 | Protection Group-Fuel System; (Line, Low Pressure) | 2 |
277-2939 Pump Gp-Water
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 27***39 | Pump Group-Water | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
268-7572 Radiator & Hyd Oil Cooler Gp
| 26***72 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
277-2976 Regulator Gp-Temperature
| 27***39 | Seal | 1 |
| 27***76 | Regulator Group-Temperature; -Water, Bucket; Assembly | 1 |
| 28***37 | Washer | 1 |
270-4206 Tank Gp-Coolant
| 27***06 | Tank Group-Coolant | 1 |
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
Electrical And Starting System
3e-6328 Alarm Gp -Cab Tilt, Warning
| 32***29 | Software Group-Monitor | 1 |
| 32***30 | Service Group-Monitor | 1 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
226-7683 Alternator Gp-Charging
| 22***83 | Alternator Group-Charging | 1 |
| 32***31 | Software Group-Monitor | 1 |
| 32***32 | Service Group-Monitor | 1 |
266-8453 Battery & Wiring Gp
| 26***53 | Battery & Wiring Group | 1 |
| 32***37 | Software Group-Monitor | 1 |
| 32***38 | Service Group-Monitor | 1 |
9w-0742 Block Gp-Junction -Battery
| 32***43 | Software Group-Monitor | 1 |
| 32***44 | Service Group-Monitor | 1 |
| 9W***42 | Block Group-Junction; -Battery | 1 |
254-3477 Circuit Breaker Gp
| 25***77 | Circuit Breaker Group | 1 |
| 32***45 | Software Group-Monitor | 1 |
| 32***46 | Service Group-Monitor | 1 |
255-3939 Control & Mtg Gp-Electronic -Ripper
| 25***39 | Control & Mtg Group-Electronic; -Ripper | 1 |
| 26***55 | Element As-Jacket Water Heater; (120-Volt, 1000-Watt) | 1 |
| 26***66 | Cord As-Heater | 1 |
308-0606 Control & Mtg Gp-Electronic -Bucket, Ripper
| 23***54 | Control Group-Unprogrammed; (Product Link 300)(Product Link 321sr) | 1 |
| 26***43 | Electronics Group-Communication; -Product Link 300 | 1 |
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
294-4418 Control & Mtg Gp-Electronic -Bucket, Ripper
| 26***56 | Element As-Jacket Water Heater; (240-Volt, 1000-Watt) | 1 |
| 26***69 | Cord As-Heater | 1 |
| 29***18 | Control & Mtg Group-Electronic; -Bucket, Ripper | 1 |
239-9954 Control Gp-Unprogrammed -Product Link 300
| 23***54 | Control Group-Unprogrammed; (Product Link 300)(Product Link 321sr) | 2 |
| 26***43 | Electronics Group-Communication; -Product Link 300 | 1 |
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
253-3394 Electronics Ar-Machine
| 12***74 | Cover-Connector; (Wire Router) | 1 |
| 16***90 | Plug As-Connector; (70-Pin) | 1 |
| 22***96 | Antenna; (Flexible)(Flex) | 1 |
262-2043 Electronics Gp-Communication -Product Link 300
| 26***43 | Electronics Group-Communication; -Product Link 300 | 1 |
| 31***86 | Bracket As | 1 |
| 31***87 | Gasket | 1 |
326-1849 Electronics Gp-Machine
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
253-3407 Electronics Gp-Machine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 19***89 | Film-Identification; (Ignition Switch) | 1 |
294-7837 Electronics Gp-Monitor
| 17***49 | Strap; (Marker) | 1 |
| 23***12 | Receptacle As-Connector; (2-Pin) | 1 |
| 29***37 | Electronics Group-Monitor | 1 |
294-7845 Electronics Gp-Monitor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 27***33 | Starting Motor Group-Electric | 1 |
294-7839 Electronics Gp-Monitor
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 29***39 | Electronics Group-Monitor | 1 |
294-7835 Electronics Gp-Monitor
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 29***35 | Electronics Group-Monitor | 1 |
294-7829 Electronics Gp-Monitor
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
294-7830 Electronics Gp-Monitor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 29***30 | Electronics Group-Monitor | 1 |
294-7843 Electronics Gp-Monitor
| 18***43 | Stud | 3 |
| 29***28 | Gasket | 1 |
| 29***43 | Electronics Group-Monitor | 1 |
294-7841 Electronics Gp-Monitor
| 12***43 | Atomizer As | 1 |
| 15***02 | Spacer; (11x20x15-mm Thk) | 1 |
| 18***51 | Cylinder As-Ether; (Eame) | 1 |
294-7833 Electronics Gp-Monitor
| 23***36 | Switch As-Rocker; (Warning Beacon)(24-Volt, Rotating Beacon) | 1 |
| 29***33 | Electronics Group-Monitor | 1 |
| 30***54 | Lamp Group-Warning Beacon | 1 |
294-7832 Electronics Gp-Monitor
| 21***88 | Lamp Group-Flood; -Cab Roof, Front | 4 |
| 29***32 | Electronics Group-Monitor | 1 |
294-7834 Electronics Gp-Monitor
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***34 | Probe As-Liquid Level; (Water Separator) | 1 |
294-7838 Electronics Gp-Monitor
| 29***38 | Electronics Group-Monitor | 1 |
| 6J***45 | Seal (.674" Inside Diameter) | 1 |
294-7836 Electronics Gp-Monitor
| 29***36 | Electronics Group-Monitor | 1 |
| 6J***45 | Seal (.674" Inside Diameter) | 1 |
294-7842 Electronics Gp-Monitor
| 12***43 | Atomizer As | 1 |
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
| 25***90 | Starting Aid Group-Ether | 1 |
294-7840 Electronics Gp-Monitor
| 23***34 | Valve Group-Ether Starting | 1 |
| 27***96 | Clamp | 1 |
| 29***40 | Electronics Group-Monitor | 1 |
294-7844 Electronics Gp-Monitor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***43 | Stud | 3 |
| 29***28 | Gasket | 1 |
294-7831 Electronics Gp-Monitor
| 21***87 | Lamp Group-Flood; -24-Volt, 65-Watt | 4 |
| 25***48 | Switch As-Rocker; (Front, Rear Floodlights) | 1 |
| 29***31 | Electronics Group-Monitor | 1 |
299-6957 Glow Plug Gp
| 29***57 | Glow Plug Group | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
256-3469 Heater Gp-Jacket Water
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***69 | Heater Group-Jacket Water | 1 |
256-3468 Heater Gp-Jacket Water
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 25***68 | Heater Group-Jacket Water | 1 |
309-5907 Installation Ar-Communication -Product Link 321sr
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 30***07 | Installation Ar-Communication; -Product Link 321sr | 1 |
310-6789 Installation Gp-Communication
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
254-3479 Installation Gp-Communication -Product Link 321sr
| 25***79 | Installation Group-Communication; -Product Link 321sr | 1 |
| 29***02 | Harness As-Motor | 1 |
| 3E***39 | Relay As; (24-Volt)(General Alarm) | 1 |
254-3480 Installation Gp-Security
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
219-6488 Lamp Gp-Flood
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
219-6487 Lamp Gp-Flood
| 21***87 | Lamp Group-Flood; -24-Volt, 65-Watt | 1 |
| 32***26 | Harness As-Cab | 1 |
| 3E***39 | Relay As; (24-Volt)(General Alarm) | 1 |
302-4254 Lamp Gp-Warning Beacon
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
308-0605 Lighting Gp-Flood -Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***69 | Terminal Assem. | 1 |
254-3478 Lighting Gp-Flood -Cab Front, Rear
| 12***74 | Cover-Connector; (Wire Router) | 1 |
| 13***25 | Receptacle As; (2-Pin) | 2 |
| 13***26 | Plug As-Connector; (2-Pin) | 1 |
254-3481 Lighting Gp-Warning Beacon
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***47 | Spacer; (10.5x20x12-mm Thk) | 1 |
277-6080 Alternator Gp-Charging
| 27***80 | Mounting Group-Alternator | 1 |
| 32***35 | Software Group-Monitor | 1 |
| 32***36 | Service Group-Monitor | 1 |
178-2345 Sensor Gp-Liquid Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
266-1467 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***46 | Locknut; (M6x1-Thd) | 4 |
| 11***18 | Clip | 1 |
183-4584 Sensor Gp-Speed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 11***46 | Locknut; (M6x1-Thd) | 4 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 2 |
319-6491 Sensor Gp-Speed
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***46 | Locknut; (M6x1-Thd) | 4 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
262-4806 Sensor Gp-Speed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 11***46 | Locknut; (M6x1-Thd) | 4 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 2 |
102-2240 Sensor Gp-Temperature
| 10***40 | Sensor Group-Temperature; -Output Transfer Gear Oil | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***46 | Locknut; (M6x1-Thd) | 4 |
301-2717 Starting Aid Gp-Ether
| 09***23 | Screw; (M3x0.5x10-mm) | 8 |
| 11***36 | Clip | 2 |
| 14***84 | Receptacle As-Connector; (3-Pin) | 1 |
252-1590 Starting Aid Gp-Ether
| 09***23 | Screw; (M3x0.5x10-mm) | 8 |
| 11***36 | Clip | 2 |
| 14***84 | Receptacle As-Connector; (3-Pin) | 1 |
307-4441 Starting Motor Gp-Electric
| 18***82 | Bolt-Socket Head; (M20x2.5x65-mm) | 4 |
| 25***82 | Coupling Group-Flexible | 1 |
| 30***41 | Starting Motor Group-Electric | 1 |
301-2768 Starting Motor Gp-Electric
| 11***42 | Nut; (M16x1.5-mm-Thd) | 1 |
| 18***31 | Cover | 1 |
| 18***42 | Cover | 1 |
301-2744 Starting Motor Gp-Electric
| 21***39 | Strap-Cable | 2 |
| 27***10 | Bolt | 1 |
| 29***80 | Bracket | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 10***28 | Filter-Oil; (Ultra High Efficiency) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***14 | Filter-Oil; (Fire Resistant Fluid) | 1 |
241-8368 Switch Gp-Magnetic -Main Relay
| 17***14 | Disc-Friction | 10 |
| 1B***78 | Cup,Tapered Roller (Timken 3720) Uoc:Bsu,Bsw | 12 |
| 1B***80 | Cone-Roller Bearing | 12 |
258-0883 Switch Gp-Pressure
| 24***92 | Final Drive & Brake Group | 1 |
| 25***83 | Switch Group-Pressure; -Fuel Filter, Differential-Fuel Filter | 1 |
| 28***25 | Cover As | 1 |
165-5970 Switch Gp-Toggle -Fuel Priming Pump
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
| 28***25 | Cover As | 2 |
| 31***15 | Final Drive & Brake Group | 1 |
239-1134 Valve Gp-Ether Starting
| 17***14 | Disc-Friction | 10 |
| 1B***78 | Cup,Tapered Roller (Timken 3720) Uoc:Bsu,Bsw | 12 |
| 1B***80 | Cone-Roller Bearing | 12 |
298-1201 Wiring Gp-Air Conditioner
| 06***40 | Seal-O-Ring (Id=37.69mm) | 1 |
| 11***30 | Pin | 1 |
| 12***94 | Plug; (Break Off) | 1 |
308-0604 Wiring Gp-Cab
| 09***05 | Bolt-Socket Head; (M16x2x100-mm) | 4 |
| 11***45 | Seal-O-Ring | 1 |
| 12***56 | Cap | 1 |
334-5104 Wiring Gp-Cab
| 11***18 | Tee-Swivel | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***45 | Connector As | 1 |
327-7801 Wiring Gp-Cab
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 14***05 | Adapter Group | 1 |
| 14***27 | Connector Group | 3 |
242-7492 Wiring Gp-Cab
| 09***05 | Bolt-Socket Head; (M16x2x100-mm) | 4 |
| 11***45 | Seal-O-Ring | 1 |
| 12***56 | Cap | 1 |
323-8127 Wiring Gp-Cab
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 14***05 | Adapter Group | 1 |
| 14***27 | Connector Group | 3 |
302-5696 Wiring Gp-Cab Tilt
| 14***35 | Clip | 2 |
| 14***27 | Connector Group | 2 |
| 14***33 | Connector As | 2 |
266-8448 Wiring Gp-Chassis
| 14***35 | Clip | 3 |
| 14***27 | Connector Group | 2 |
| 14***33 | Connector As | 2 |
282-6699 Wiring Gp-Control -Bucket
| 24***87 | Motor & Mtg Group-Travel; -Hydrostatic Drive | 1 |
| 26***17 | Segment Group-Sprocket | 2 |
| 26***58 | Lines Group-Hydrostatic | 1 |
280-9449 Wiring Gp-Control
| 11***24 | Setscrew-Socket; (M12x1.75-Thd) | 1 |
| 12***50 | Shim; (1-mm Thk) | 1 |
| 1J***76 | Seal-O-Ring; (202.79mm Id) | 1 |
309-5906 Wiring Gp-Control -Hydrostatic Drive
| 19***81 | Washer-Hard; (22x40x10-mm Thk) | 1 |
| 26***27 | Pump Group-Piston; -Hydrostatic Drive | 1 |
| 26***89 | Bracket As | 1 |
280-9675 Wiring Gp-Control -Multipurpose Bucket
| 1P***43 | Plug-Breather | 1 |
| 24***73 | Housing | 1 |
| 27***70 | Bracket As | 1 |
281-5665 Wiring Gp-Engine
| 11***29 | Screw | 1 |
| 12***82 | Pin-Threaded | 1 |
| 14***87 | Plug (M42) | 1 |
305-8977 Wiring Gp-Engine
| 09***31 | Ring-Retaining | 1 |
| 11***38 | Barrel | 1 |
| 11***41 | Bearing-Tapered Roller | 1 |
Engine Arrangement
242-1358 Engine Ar-Primary
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
240-6534 Installation Ar-Engine
| 24***34 | Installation Ar-Engine | 1 |
| 29***23 | Plate | 1 |
| 29***24 | Spacer | 1 |
Frame And Body
253-3813 Bar Gp-Striker
| 25***13 | Bar Group-Striker | 1 |
| 30***31 | Guard As; (Rh) | 1 |
| 30***32 | Guard As; (Lh) | 1 |
265-3722 Bumper Gp
| 26***22 | Bumper Group | 1 |
| 28***58 | Cover As; (Lh) | 1 |
| 28***59 | Cover As; (Rh) | 1 |
299-6022 Counterweight & Mounting Gp
| 27***26 | Hitch As | 1 |
| 29***22 | Counterweight & Mounting Group | 1 |
| 7B***63 | Latch Uoc:Bsu,Bsw | 1 |
299-6017 Counterweight Gp
| 27***17 | Shield Group-Air Cleaner | 1 |
| 29***17 | Counterweight Group | 1 |
| 31***40 | Hood Group-Engine | 1 |
286-2751 Cover Gp-Access -Loader Frame
| 15***21 | Cap As | 1 |
| 22***94 | Lock As | 1 |
| 26***18 | Hood As | 1 |
286-2753 Cover Gp-Access -Loader Frame
| 15***21 | Cap As | 1 |
| 22***94 | Lock As | 1 |
| 28***18 | Seal; (60-cm Each) | 0 |
304-9367 Door Gp-Access -Lh
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 17 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 7 |
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 8 |
304-9370 Door Gp-Access -Rh
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 17 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 7 |
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 8 |
268-7575 Enclosure Gp-Radiator
| 14***44 | Spacer; (11x19x20-mm Thk) | 1 |
| 21***43 | Shim; (1-mm Thk) | 9 |
| 26***75 | Enclosure Group-Radiator | 1 |
297-1946 Fender Gp -Lh
| 19***17 | Plug | 2 |
| 29***46 | Fender Group; -Lh | 1 |
| 2Y***64 | Plug-Button | 6 |
297-1947 Fender Gp -Rh
| 27***18 | Step As; (Lh) | 1 |
| 27***76 | Plate | 1 |
| 27***41 | Hinge As | 1 |
248-8697 Fender Gp
| 21***43 | Shim; (1-mm Thk) | 5 |
| 24***97 | Fender Group | 1 |
| 27***47 | Bracket | 1 |
282-8643 Frame Gp-Loader
| 09***69 | Bolt | 4 |
| 27***84 | Step As | 1 |
| 28***43 | Frame Group-Loader | 1 |
356-7379 Grill Gp-Radiator
| 35***79 | Grill Group-Radiator | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
| 3W***70 | Bearing | 2 |
304-9755 Grill Gp-Radiator -Rear
| 2J***74 | Seal-O-Ring; 9.12mm(.36in) Id | 1 |
| 2J***26 | Seal-Lip Type | 1 |
| 30***55 | Grill Group-Radiator; -Rear | 1 |
285-0398 Grill Gp-Radiator -Rear
| 11***52 | Spacer; (13x25x22.14-mm Thk) | 2 |
| 11***21 | Seal; (139cm) | 0 |
| 12***28 | Adaptor - Includes:- | 2 |
282-8644 Guard Gp-Bottom
| 28***44 | Guard Group-Bottom | 1 |
| 31***80 | Cap-Track Roller | 2 |
| 8T***60 | Bolt; (M20x2.5x90-mm) | 4 |
276-0158 Guard Gp-Final Drive
| 19***82 | Washer-Hard; (26x47x12-mm Thk) | 16 |
| 22***98 | Bearing-Sleeve | 2 |
| 22***99 | Bearing-Sleeve | 2 |
276-0159 Guard Gp-Final Drive
| 13***15 | Plate | 1 |
| 13***16 | Plate | 1 |
| 25***43 | Guard | 2 |
286-5521 Guard Gp-Front -Heavy-Duty
| 28***94 | Shim; (10-mm Thk) | 4 |
| 28***97 | Idler Group-Front; -Systemone, Lh | 1 |
| 28***98 | Idler Group-Front; -Systemone, Rh | 1 |
275-8747 Guard Gp-Front
| 13***15 | Plate | 1 |
| 13***16 | Plate | 1 |
| 25***43 | Guard | 2 |
3w-8578 Guard Gp-Idler -Enhanced Extended Wear Life
| 1H***28 | Seal 6.3 cm(2.484 In.) I.D.; Seal--To Seal Pumps To Case | 2 |
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 2 |
| 1J***02 | Seal-Lip Type | 4 |
284-9699 Guard Gp-Idler
| 1H***28 | Seal 6.3 cm(2.484 In.) I.D.; Seal--To Seal Pumps To Case | 2 |
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 2 |
| 1J***02 | Seal-Lip Type | 4 |
261-4228 Guard Gp-Lift Cylinder
| 1H***28 | Seal 6.3 cm(2.484 In.) I.D.; Seal--To Seal Pumps To Case | 2 |
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 2 |
| 1J***02 | Seal-Lip Type | 4 |
256-7406 Guard Gp-Lighting
| 25***06 | Guard Group-Lighting | 1 |
| 30***75 | Idler Group-Front; -Enhanced Extended Wear Life | 1 |
| 30***88 | Idler Group-Front; -Enhanced Extended Wear Life | 1 |
267-5566 Guard Gp-Lines -Lift
| 1H***28 | Seal 6.3 cm(2.484 In.) I.D.; Seal--To Seal Pumps To Case | 2 |
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 2 |
| 1J***02 | Seal-Lip Type | 4 |
280-0357 Guard Gp-Lines -Front
| 1H***28 | Seal 6.3 cm(2.484 In.) I.D.; Seal--To Seal Pumps To Case | 2 |
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 2 |
| 1J***02 | Seal-Lip Type | 4 |
347-2167 Guard Gp-Mud
| 19***82 | Washer-Hard; (26x47x12-mm Thk) | 16 |
| 22***98 | Bearing-Sleeve | 1 |
| 22***99 | Bearing-Sleeve | 1 |
277-0525 Hitch Gp
| 23***79 | Link As-Track Box; -Link Box | 19 |
| 23***99 | Track Link | 36 |
| 27***25 | Hitch Group | 1 |
253-9237 Hitch Gp
| 1H***28 | Seal 6.3 cm(2.484 In.) I.D.; Seal--To Seal Pumps To Case | 2 |
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 2 |
| 1J***02 | Seal-Lip Type | 4 |
301-7852 Hood & Precleaner Ar
| 23***82 | Cartridge As-Track Link | 2 |
| 23***99 | Track Link | 2 |
| 30***52 | Sheet, Hood & Precleaner Ar | 1 |
301-7851 Hood Ar
| 29***85 | Cartridge As-Track Link | 2 |
| 30***51 | Hood Ar | 1 |
| 6Y***73 | Plug; (Clear) | 2 |
272-2875 Hood Gp -Perforated
| 23***99 | Track Link | 2 |
| 27***75 | Hood Group; -Perforated | 1 |
| 29***85 | Cartridge As-Track Link | 2 |
292-7858 Hood Gp
| 26***59 | Seal-Football | 2 |
| 29***58 | Hood Group | 1 |
| 2Q***68 | Ring | 1 |
316-9440 Hood Gp-Engine
| 31***40 | Hood Group-Engine | 1 |
316-9441 Hood Gp-Engine
| 31***41 | Hood Group-Engine | 1 |
304-9364 Panel Gp-Enclosure -Lh
| 30***64 | Panel Group-Enclosure; -Lh, Connection Gasket | 1 |
304-9365 Panel Gp-Enclosure -Rh
| 30***65 | Panel Group-Enclosure; -Rh | 1 |
299-6015 Plug Gp-Bumper
| 29***15 | Plug Group-Bumper | 1 |
275-1048 Step Gp
| 27***48 | Step Group | 1 |
273-4275 Step Gp
| 27***75 | Step Group | 1 |
285-7170 Tilt Gp-Platform
| 28***70 | Tilt Group-Platform | 1 |
Fuel System
284-6616 Adapter Gp-Fast Fill Fuel
| 10***40 | Sensor Group-Temperature; -Output Transfer Gear Oil | 1 |
| 15***45 | Elbow | 1 |
| 16***16 | Adapter As | 1 |
306-4998 Cap Gp-Fuel Filler -Lockable, Vented
| 03***57 | Washer; (13x26x6-mm Thk) | 12 |
| 25***32 | Tank Group-Fuel | 1 |
| 29***94 | Bracket | 2 |
305-7294 Filter Gp-Fuel
| 03***57 | Washer; (13x26x6-mm Thk) | 12 |
| 25***40 | Tank Group-Fuel; -Fast Fill | 1 |
| 29***94 | Bracket | 2 |
174-9570 Filter Gp-Water Sep & Fuel
| 14***39 | Connector As. | 1 |
| 14***60 | Elbow Group | 1 |
| 14***10 | Plug As; (16.36mm Id) | 1 |
306-9390 Injector Gp-Fuel
| 19***23 | Adapter; (Fuel Cap) | 1 |
| 21***06 | Plug As; (Fuel Tank Drain) | 1 |
| 30***42 | Adapter As-Fuel | 1 |
293-9590 Injector Gp-Fuel
| 19***23 | Adapter; (Fuel Cap) | 1 |
| 21***06 | Plug As; (Fuel Tank Drain) | 1 |
| 29***90 | Injector Group-Fuel | 1 |
282-0490 Injector Gp-Fuel
| 14***39 | Connector As. | 1 |
| 14***60 | Elbow Group | 1 |
| 14***10 | Plug As; (16.36mm Id) | 1 |
320-0690 Injector Gp-Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 32***90 | Injector Group-Fuel | 1 |
305-7299 Lines Gp-Fuel
| 10***17 | Washer | 1 |
| 10***50 | Bolt; (M10x1.5x100-mm) | 4 |
| 22***09 | Belt Tensioner | 1 |
242-9479 Lines Gp-Fuel
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***44 | Coil Assem. | 1 |
351-0973 Pump Gp-Fuel
| 03***97 | Boot | 1 |
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 15***00 | Battery; -Maintenance Free | 2 |
282-3232 Pump Gp-Fuel Injection
| 03***97 | Boot | 1 |
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
310-0661 Pump Gp-Fuel Injection
| 03***09 | Terminal-Ring; (For 1/4-In Bolt) | 2 |
| 13***25 | Receptacle As; (2-Pin) | 1 |
| 13***31 | Gasket | 1 |
276-8398 Pump Gp-Fuel Injection
| 03***97 | Boot | 1 |
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
291-5919 Pump Gp-Fuel Injection
| 1D***17 | Nut,Plain,Hexagon Starter Motor Assembly | 3 |
| 29***19 | Pump Group-Fuel Injection; (High Pressure) | 1 |
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
317-8021 Pump Gp-Fuel Injection
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 28***33 | Control Group-Unprogrammed; (Product Link 300) | 1 |
183-2824 Pump Gp-Fuel Priming -Manual
| 18***24 | Pump Group-Fuel Priming; -Manual | 1 |
| 25***07 | Electronics Group-Machine | 1 |
284-9413 Pump Gp-Fuel Priming
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 28***13 | Pump Group-Fuel Priming | 1 |
301-2710 Pump Gp-Fuel Prm & Water Sep -Electric
| 30***10 | Pump Group-Fuel Prm & Water Sep; -Electric | 1 |
| 32***49 | Software Group-Machine | 1 |
212-3657 Pump Gp-Fuel Prm & Water Sep -Electric
| 21***57 | Pump Group-Fuel Prm & Water Sep; -Electric-Primary Filter | 1 |
| 30***87 | Control Group-Unprogrammed; (Transmission) | 1 |
| 34***36 | Software Group-Machine | 1 |
253-7940 Tank Gp-Fuel -Fast Fill
| 25***40 | Tank Group-Fuel; -Fast Fill | 1 |
| 32***23 | Software Group-Monitor | 1 |
| 32***24 | Service Group-Monitor | 1 |
253-7932 Tank Gp-Fuel
| 25***32 | Tank Group-Fuel | 1 |
| 32***19 | Software Group-Monitor | 1 |
| 32***20 | Service Group-Monitor | 1 |
304-6607 Tank Gp-Fuel -Fast Fill
| 30***07 | Tank Group-Fuel; -Fast Fill | 1 |
| 32***27 | Software Group-Monitor | 1 |
| 32***28 | Service Group-Monitor | 1 |
251-5945 Tank Gp-Fuel -Fast Fill
| 25***45 | Tank Group-Fuel; -Fast Fill | 1 |
| 32***15 | Software Group-Monitor | 1 |
| 32***16 | Service Group-Monitor | 1 |
242-9472 Tank Gp-Fuel
| 24***72 | Tank Group-Fuel | 1 |
| 32***13 | Software Group-Monitor | 1 |
| 32***14 | Service Group-Monitor | 1 |
303-5935 Tank Gp-Fuel
| 30***35 | Tank Group-Fuel | 1 |
| 32***25 | Software Group-Monitor | 1 |
| 32***26 | Service Group-Monitor | 1 |
Hydraulic System
160-2669 Accumulator Gp-Hydraulic -Charged
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 14***11 | Plug Group | 1 |
| 14***59 | Plug | 2 |
180-9419 Accumulator Gp-Hydraulic -Uncharged
| 14***10 | Plug As; (16.36mm Id) | 2 |
| 14***59 | Plug | 4 |
| 18***19 | Accumulator Group-Hydraulic; -Uncharged | 1 |
257-7612 Control Ar-Hydraulic -Hydrostatic Drive, Brake
| 25***12 | Control Ar-Hydraulic; -Hydrostatic Drive, Brake | 1 |
| 28***27 | Seal-Dust | 1 |
| 28***28 | Kit-Seal; (Fan Motor) | 1 |
292-9043 Cylinder Gp-Bucket -Multipurpose
| 1K***72 | Locknut Horn To Guard | 2 |
| 29***43 | Bushing, Cylinder Group-Bucket; -Multipurpose | 1 |
| 7K***02 | Seal (In The Rod Hole) | 4 |
294-5575 Cylinder Gp-Cab Tilt
| 00***86 | Connector-Hose (1/4-18nptf Thd) | 1 |
| 09***86 | Clamp; (Hose) | 2 |
| 15***30 | Elbow As | 1 |
294-0509 Cylinder Gp-Lift -Position Sensing, Rh
| 15***76 | Collar | 2 |
| 16***51 | Spacer; (13x20x73-mm Thk) | 1 |
| 16***88 | Spacer; (13x20x54-mm Thk) | 1 |
246-9101 Cylinder Gp-Lift -Lh
| 15***76 | Collar | 2 |
| 16***51 | Spacer; (13x20x73-mm Thk) | 1 |
| 16***88 | Spacer; (13x20x54-mm Thk) | 1 |
286-0813 Cylinder Gp-Ripper -Lh
| 10***32 | Seal | 1 |
| 10***33 | Housing-Pump | 1 |
| 10***34 | Plunger | 1 |
286-0812 Cylinder Gp-Ripper -Rh
| 28***12 | Cylinder Group-Ripper; -Rh | 1 |
294-0510 Cylinder Gp-Tilt -Position Sensing
| 10***46 | Piston As-Pump | 9 |
| 10***48 | Bearing | 1 |
| 10***50 | Spacer-Barrel | 1 |
276-0160 Guard Gp-Tilt Cylinder
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 1U***27 | Guide-Valve | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
240-6535 Hydraulic Ar
| 18***63 | Plug Group | 1 |
| 24***35 | Hydraulic Ar | 1 |
| 24***60 | Bolt; (M12x1.75x180-mm) | 4 |
253-6932 Hydraulic Ar-2 Valve
| 18***63 | Plug Group | 1 |
| 24***60 | Bolt; (M12x1.75x180-mm) | 4 |
| 25***32 | Hydraulic Ar-2 Valve | 1 |
253-6933 Hydraulic Ar-3 Valve
| 18***63 | Plug Group | 1 |
| 24***61 | Bolt; (M12x1.75x255-mm) | 4 |
| 24***71 | Valve Group-Control; -Bucket Lift, Lower | 1 |
253-6934 Hydraulic Ar-3 Valve
| 18***63 | Plug Group | 1 |
| 24***61 | Bolt; (M12x1.75x255-mm) | 4 |
| 24***71 | Valve Group-Control; -Bucket Lift, Lower | 1 |
253-6935 Hydraulic Ar-4 Valve
| 18***63 | Plug Group | 1 |
| 24***61 | Bolt; (M12x1.75x255-mm) | 4 |
| 25***35 | Hydraulic Ar-4 Valve | 1 |
284-9950 Lines Gp-Bucket Cylinder
| 18***63 | Plug Group | 1 |
| 24***61 | Bolt; (M12x1.75x255-mm) | 4 |
| 28***50 | Lines Group-Bucket Cylinder | 1 |
268-7745 Lines Gp-Front -Lift Arms
| 18***63 | Plug Group | 1 |
| 24***62 | Bolt-Socket Head; (M12x1.75x330-mm) | 4 |
| 24***71 | Valve Group-Control; -Bucket Lift, Lower | 1 |
332-8050 Lines Gp-Front
| 18***63 | Plug Group | 1 |
| 24***62 | Bolt-Socket Head; (M12x1.75x330-mm) | 4 |
| 29***81 | Manifold Group-Valve; -Outlet | 1 |
269-0002 Lines Gp-Hydraulic Fan
| 26***02 | Lines Group-Hydraulic Fan | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 6F***55 | Seal --To Manifold Ferrule | 1 |
268-6469 Lines Gp-Hydraulic Oil Cooler
| 14***57 | Plug | 1 |
| 14***59 | Plug | 4 |
| 18***63 | Plug Group | 1 |
267-6319 Lines Gp-Lift Cylinder
| 03***36 | Seal-O-Ring | 2 |
| 14***57 | Plug | 1 |
| 14***59 | Plug | 4 |
332-8043 Lines Gp-Lift Cylinder
| 14***57 | Plug | 1 |
| 14***59 | Plug | 4 |
| 18***63 | Plug Group | 1 |
268-8606 Lines Gp-Pump -Implement
| 14***57 | Plug | 1 |
| 14***59 | Plug | 4 |
| 18***63 | Plug Group | 1 |
332-8042 Lines Gp-Pump
| 14***15 | Connector As | 1 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***27 | Connector Group | 1 |
267-9224 Lines Gp-Rear Attachment
| 14***15 | Connector As | 1 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***27 | Connector Group | 1 |
332-8048 Lines Gp-Rear Attachment
| 03***36 | Seal-O-Ring | 1 |
| 14***57 | Plug | 1 |
| 14***59 | Plug | 2 |
304-3018 Lines Gp-Ripper
| 14***57 | Plug | 1 |
| 14***59 | Plug | 2 |
| 18***63 | Plug Group | 1 |
332-8044 Lines Gp-Tilt Cylinder
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 20***71 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
| 20***73 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
282-7727 Lines Gp-Tilt Cylinder
| 14***57 | Plug | 1 |
| 14***59 | Plug | 2 |
| 18***63 | Plug Group | 1 |
291-9652 Manifold Gp-Control -Hydraulic Fan, Auto Reversing
| 19***64 | Valve Group-Control | 1 |
| 29***52 | Manifold Group-Control; -Hydraulic Fan, Auto Reversing | 1 |
| 30***41 | Ring-Backup | 1 |
252-7008 Manifold Gp-Control -Demand Fan
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 25***08 | Manifold Group-Control; -Demand Fan | 1 |
| 28***40 | Stud-Mounting; (M6x1-Thd) | 4 |
283-9381 Manifold Gp-Valve
| 03***43 | Seal-O-Ring | 1 |
| 28***70 | Gasket | 1 |
| 28***81 | Manifold Group-Valve | 1 |
294-5581 Manifold Gp-Valve -Outlet
| 03***67 | Ring; (Back Up) | 1 |
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***36 | Seal-O-Ring | 2 |
273-1583 Motor Gp-Gear -Cooling Fan
| 03***67 | Ring; (Back Up) | 1 |
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***36 | Seal-O-Ring | 2 |
9v-1120 Mounting Gp-Cylinder
| 24***56 | Kit-Seal; (Shuttle Valve)(Implement Control) | 1 |
| 3H***42 | Seal; (Included In Seal Kit) | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
267-8504 Mounting Gp-Hydraulic Tank
| 03***28 | Seal-O-Ring | 1 |
| 12***32 | Ring-Backup | 1 |
| 23***13 | Coil As | 1 |
332-8053 Mounting Gp-Valve
| 31***29 | Coil As | 1 |
| 33***53 | Mounting Group-Valve | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
282-7753 Mounting Gp-Valve
| 20***71 | Kit-Seal; (Solenoid Valve) | 1 |
| 21***61 | Flange | 1 |
| 28***53 | Mounting Group-Valve | 1 |
282-4076 Pump Gp-Hand -Cab Tilt
| 19***47 | Washer; (19.15x31.65x2.36-mm Thk) | 1 |
| 19***14 | Nut; (3/4-32-2b-Thd) | 1 |
| 28***76 | Pump Group-Hand; -Cab Tilt | 1 |
252-2680 Pump Gp-Piston -Implement
| 19***94 | Lever & Bearing As | 1 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 8 |
| 21***65 | Bearing | 2 |
226-1224 Rotating Gp-Pump -Implement
| 19***94 | Lever & Bearing As | 1 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 8 |
| 21***65 | Bearing | 2 |
267-8806 Tank Gp-Hydraulic
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 14***26 | Plug | 2 |
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
251-1673 Valve Gp-Bank 2 -Bucket Control
| 25***73 | Valve Group-Bank 2; -Bucket Control | 1 |
| 30***96 | Accessory Group-Cab | 1 |
| 30***97 | Accessory Group-Cab | 1 |
333-3851 Valve Gp-Bank 2 -Bucket Lift, Tilt
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 2 |
| 12***97 | Knob; (Governor) | 2 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 13 |
333-3853 Valve Gp-Bank 3 -Lift, Tilt, Mp Bucket
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 14***26 | Plug | 2 |
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
248-2042 Valve Gp-Bank 3 -Bucket Control, Ripper
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 2 |
| 12***97 | Knob; (Governor) | 2 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 13 |
333-3852 Valve Gp-Bank 3 -Lift, Tilt, Ripper
| 12***06 | Bumper As | 2 |
| 13***35 | Blade As-Wiper; (650-mm) | 1 |
| 14***97 | Cap | 4 |
255-4872 Valve Gp-Bank 3 -Bucket Control
| 12***06 | Bumper As | 2 |
| 13***35 | Blade As-Wiper; (650-mm) | 1 |
| 14***97 | Cap | 2 |
252-4560 Valve Gp-Bank 4 -Bucket Control, Ripper
| 22***93 | Seal; (80.5-cm) | 0 |
| 25***60 | Valve Group-Bank 4; -Bucket Control, Ripper | 1 |
| 25***06 | Floor Mat | 1 |
333-3854 Valve Gp-Bank 4
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 4 |
| 24***44 | Washer; (12.7x31.7x1-mm Thk) | 2 |
| 26***79 | Latch | 1 |
270-0350 Valve Gp-Check -Pilot Oil
| 27***50 | Valve Group-Check; -Pilot Oil-Load | 1 |
282-7752 Valve Gp-Control -Hydraulic Fan, Auto Reversing
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***15 | Grommet | 1 |
| 13***93 | Bushing | 1 |
255-4871 Valve Gp-Control -Bucket Open, Close
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
| 25***71 | Valve Group-Control; -Bucket Open, Close | 1 |
282-7728 Valve Gp-Control -Demand Fan
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
| 25***27 | Receiver Dryer As; (Refrigerant) | 1 |
246-2373 Valve Gp-Control -Bucket Tilt, Dump
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
| 17***35 | Accumulator-Refrigerant; (Air Conditioner) | 1 |
333-3869 Valve Gp-Control
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 9 |
| 25***98 | Knob | 2 |
| 26***82 | Bracket | 1 |
248-2044 Valve Gp-Control -Ripper Lift, Lower
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
| 24***44 | Valve Group-Control; -Ripper Lift, Lower | 1 |
246-2371 Valve Gp-Control -Bucket Lift, Lower
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
| 17***35 | Accumulator-Refrigerant; (Air Conditioner) | 1 |
333-3866 Valve Gp-Control -Lift
| 29***81 | Arm As; (Inner, Rh) | 1 |
| 29***84 | Arm As; (Inner, Lh) | 1 |
| 29***86 | Plate As | 1 |
333-3867 Valve Gp-Control -Tilt
| 29***90 | Bearing | 1 |
| 29***05 | Arm As; (Outer, Rh) | 1 |
| 29***08 | Spacer | 1 |
333-3868 Valve Gp-Control -Multipurpose Bucket
| 29***90 | Bearing | 1 |
| 29***08 | Spacer | 1 |
| 29***12 | Arm; (Outer, Lh) | 1 |
112-1817 Valve Gp-Manual -Dead Engine Lower
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 30***64 | Box Group-Storage; (Shovel) | 1 |
247-0741 Valve Gp-Pilot -Joystick-Hydrostatic Drive
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 24***41 | Valve Group-Pilot; -Joystick-Hydrostatic Drive | 1 |
| 35***20 | Box Group-Storage; (Shovel) | 1 |
193-1665 Valve Gp-Pressure Reducing -Signal Duplication
| 19***65 | Valve Group-Pressure Reducing; -Signal Duplication | 1 |
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 2 |
| 27***40 | Pin-Detent | 1 |
285-7612 Valve Gp-Pump Control -Pressure, Flow Compensator-Implement
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 7 |
| 17***62 | Screw-Flat Head; (M8x1.25x40-mm) | 2 |
| 19***70 | Locknut; (3/8-16-Thd) | 1 |
256-2342 Valve Gp-Relief -Implement Pilot Oil
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 7 |
| 17***62 | Screw-Flat Head; (M8x1.25x40-mm) | 2 |
| 19***70 | Locknut; (3/8-16-Thd) | 1 |
256-2343 Valve Gp-Relief -Implement Pilot Oil
| 24***30 | Cab Group | 1 |
| 25***29 | Mounting Group-Rops | 1 |
| 25***43 | Valve Group-Relief; -Implement Pilot Oil | 1 |
260-8590 Valve Gp-Shuttle -Implement Pilot Oil
| 24***92 | Wiring Group-Cab | 1 |
| 25***20 | Cab As | 1 |
| 25***21 | Door Group-Cab; -Rh | 1 |
211-2092 Valve Gp-Solenoid
| 21***92 | Valve Group-Solenoid; -Hydraulic Fan | 1 |
| 25***77 | Circuit Breaker Group | 1 |
| 30***81 | Door Group-Cab; -Rh | 1 |
285-5730 Valve Gp-Solenoid
| 25***77 | Circuit Breaker Group | 1 |
| 28***30 | Valve Group-Solenoid | 1 |
| 30***81 | Door Group-Cab; -Rh | 1 |
225-0300 Valve Gp-Solenoid
| 22***00 | Valve Group-Solenoid; -Hydraulic Lockout | 1 |
| 30***85 | Insulation Group-Weather | 1 |
| 32***40 | Cab As-Rops | 1 |
313-7668 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 31***68 | Valve Group-Solenoid; -Pilot Proportioning | 1 |
Implements
333-8929 Control Gp-Bucket
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***72 | Seal; (135-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
282-8645 Control Gp-Bucket
| 18***06 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
| 25***81 | Bolt-Flange Head; (M8x1.25x100-mm) | 2 |
| 28***45 | Control Group-Bucket | 1 |
Lubrication System
280-2050 Breather Gp -Crankcase
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 14***11 | Plug Group | 1 |
| 14***59 | Plug | 2 |
307-1843 Filler Gp-Engine Oil
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 3 |
| 29***42 | Muffler As | 1 |
| 29***51 | Plate As | 1 |
277-1973 Filler Gp-Engine Oil
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 3 |
| 27***73 | Filler Group-Engine Oil | 1 |
| 29***42 | Muffler As | 1 |
277-2912 Filter Gp-Engine Oil
| 24***53 | Pipe | 1 |
| 27***12 | Filter Group-Engine Oil; -Engine | 1 |
| 29***67 | Clamp-Pipe | 1 |
277-8703 Oil Change Gp-High Speed -Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***45 | Bolt; (M6x1.0x20mm) | 4 |
| 19***32 | Motor As-Blower; (24-Volt, Cab Air) | 1 |
277-4262 Pump Gp-Engine Oil
| 17***15 | Clamp | 1 |
| 17***34 | Clamp | 1 |
| 24***12 | Seal | 1 |
277-4694 Valve Gp-Fluid Sampling -Engine Oil
| 25***67 | Clamp | 1 |
| 26***34 | Shield | 1 |
| 27***94 | Valve Group-Fluid Sampling; -Engine Oil | 1 |
Machine Arrangement
240-6532 Chassis Ar
| 24***32 | Chassis Ar | 1 |
| 24***78 | Plate & Film Group | 1 |
| 26***48 | Wiring Group-Chassis | 1 |
240-6530 Common Ar
| 24***30 | Common Ar | 1 |
| 24***32 | Chassis Ar | 1 |
| 24***33 | Power Train Ar | 1 |
333-8901 Conversion Ar-Machine
| 24***01 | Cylinder Group-Lift; -Lh | 1 |
| 26***19 | Lines Group-Lift Cylinder | 1 |
| 26***45 | Lines Group-Front; -Lift Arms | 1 |
357-9488 Option Ar-Cab
| 27***29 | Pulley Group-Crankshaft | 1 |
| 27***35 | Starting Motor Group-Electric | 1 |
| 27***73 | Filler Group-Engine Oil | 1 |
357-9489 Option Ar-Cab -Heavy-Duty
| 24***51 | Pipe Group-Exhaust; -Short | 1 |
| 24***79 | Lines Group-Fuel | 1 |
| 24***95 | Lines Group-Air | 1 |
357-9466 Option Ar-Hydraulic -Joystick Control
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 16***26 | Seal-O-Ring | 1 |
| 18***59 | Filter Element-Breather; (Crankcase) | 1 |
357-9465 Option Ar-Hydraulic -Joystick Control, 3-Function
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 27***23 | Plug | 1 |
357-9463 Option Ar-Hydraulic -Joystick Control
| 1B***36 | Key-Woodruff | 1 |
| 27***25 | Tappet | 12 |
| 27***26 | Rod-Push | 12 |
357-9467 Option Ar-Hydraulic -Joystick Control
| 10***66 | Clamp-Hose | 2 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
357-9464 Option Ar-Hydraulic -Joystick Control
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 20***02 | Cover As; (Power Take-Off) | 1 |
357-9570 Option Ar-Lighting
| 03***20 | Clip | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 12***81 | Clip | 1 |
357-9569 Option Ar-Lighting
| 10***66 | Clamp-Hose | 2 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
357-9586 Option Ar-Machine
| 1B***36 | Key-Woodruff | 1 |
| 22***39 | Dowel | 1 |
| 27***87 | Crankshaft Kt | 1 |
357-9585 Option Ar-Machine
| 03***20 | Clip | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 12***81 | Clip | 1 |
357-9587 Option Ar-Machine
| 20***19 | Bolt; (M8x1.25x16-mm) | 8 |
| 29***86 | Housing-Rear | 1 |
| 30***45 | Cylinder Block Group | 1 |
357-9588 Option Ar-Undercarriage
| 06***43 | Plug-Side-(1.251 Dia.) | 5 |
| 10***41 | Bolt; (M6x1x10-mm) | 6 |
| 18***84 | Dowel | 2 |
358-6854 Option Ar-Work Tool
| 24***51 | Guard As | 1 |
| 35***54 | Option Ar-Work Tool | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
357-9621 Option Ar-Work Tool -General Purpose
| 17***41 | Head-Gasket | 1 |
| 27***15 | Cylinder Head As | 1 |
| 27***34 | Bolt-Special; (Cylinder Head) | 14 |
357-9617 Option Ar-Work Tool
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 27***16 | Plug-Core | 6 |
357-9618 Option Ar-Work Tool
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 27***16 | Plug-Core | 6 |
357-9623 Option Ar-Work Tool -General Purpose
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 35***23 | Option Ar-Work Tool; -General Purpose | 1 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 1 |
358-6855 Option Ar-Work Tool
| 10***41 | Bolt; (M12x1.75x25-mm) | 3 |
| 27***18 | Seal | 1 |
| 27***21 | Plug | 2 |
357-9624 Option Ar-Work Tool -General Purpose
| 27***88 | Gear-Starting Motor Ring; (134-Teeth) | 1 |
| 27***54 | Bolt | 12 |
| 32***69 | Flywheel As | 1 |
357-9622 Option Ar-Work Tool -General Purpose
| 17***41 | Head-Gasket | 1 |
| 27***34 | Bolt-Special; (Cylinder Head) | 14 |
| 30***63 | Cylinder Head As | 1 |
Operator Station
307-4296 Accessory Gp-Cab
| 28***40 | Cushion As | 1 |
| 28***41 | Bracket | 1 |
| 28***42 | Bracket As | 1 |
307-4297 Accessory Gp-Cab
| 28***40 | Cushion As | 1 |
| 28***41 | Bracket | 1 |
| 28***42 | Bracket As | 1 |
321-3400 Accessory Gp-Cab
| 13***23 | Screw-Flat Head; (6-32x0.5-In) | 2 |
| 28***45 | Cover As; (Console, Lh Top) | 1 |
| 28***46 | Cover As; (Console, Lh Bottom) | 1 |
307-4287 Accessory Gp-Cab
| 28***40 | Cushion As | 1 |
| 28***41 | Bracket | 1 |
| 28***42 | Bracket As | 1 |
283-5570 Accessory Gp-Cab
| 13***23 | Screw-Flat Head; (6-32x0.5-In) | 2 |
| 14***85 | Nut-Weld; (M10 X 1.5 Thd) | 1 |
| 25***98 | Knob | 1 |
327-7799 Accessory Gp-Cab
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 27***65 | Boot | 1 |
| 27***67 | Retainer-Boot | 1 |
294-7779 Adjuster Gp-Seat
| 14***31 | Cap-Push Button; (Yellow)(Transmission Hold) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
| 22***55 | Cap-Push Button; (Black) | 1 |
237-3970 Air Compressor Gp-Seat
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 23***70 | Air Compressor Group-Seat | 1 |
| 27***65 | Boot | 1 |
327-7797 Air Conditioner & Mounting Gp
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 10 |
| 21***89 | Screw; (M4x25-mm) | 3 |
251-1926 Air Conditioner & Mounting Gp -Cab
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 25***26 | Air Conditioner & Mounting Group; -Cab | 1 |
| 27***65 | Boot | 1 |
307-4286 Air Conditioner & Mounting Gp
| 28***50 | Control & Mtg Group-Joystick; -Multipurpose Bucket | 1 |
| 28***19 | Film-Instruction; (Bucket Controls)(Multipurpose) | 1 |
| 30***86 | Air Conditioner & Mounting Group | 1 |
279-8843 Air Conditioner Gp
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 21***89 | Screw; (M4x25-mm) | 3 |
291-8011 Arm Gp-Seat Suspension -Outer, Lh
| 14***31 | Cap-Push Button; (Yellow)(Transmission Hold) | 2 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 19 |
291-8004 Arm Gp-Seat Suspension -Outer, Rh
| 28***65 | Film-Instruction; (Ripper Control) | 1 |
| 29***04 | Arm Group-Seat Suspension; -Outer, Rh | 1 |
| 30***73 | Control Group-Handle; -Winch-Ripper, Winch-Ripper | 1 |
291-7980 Arm Gp-Seat Suspension -Center
| 28***98 | Control & Mtg Group-Joystick; -Bucket | 1 |
| 28***00 | Film-Instruction; (Bucket Controls) | 1 |
| 29***80 | Arm Group-Seat Suspension; -Center | 1 |
284-7054 Armrest Gp -Rh
| 25***76 | Control Group-Steering | 1 |
| 25***81 | Seal | 1 |
| 28***79 | Control Group-Pedal; -Speed Override, Brake | 1 |
350-9419 Box Gp-Storage -Shovel
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 20***93 | Bolt; (M6x1x12-mm) | 2 |
| 25***81 | Seal | 1 |
310-3220 Box Gp-Storage -Shovel
| 11***49 | Screw-Pan Head; (M5x0.8x30-mm) | 2 |
| 12***70 | Spring; (Lh) | 1 |
| 12***71 | Spring; (Rh) | 1 |
303-6177 Brace Gp-Cab Lift
| 11***49 | Screw-Pan Head; (M5x0.8x30-mm) | 4 |
| 12***90 | Spacer; (10.2x16x16-mm Thk) | 4 |
| 12***65 | Plate | 2 |
286-8238 Bracket Gp-Mounting -Lh
| 23***25 | Control Group-Unprgmed Monitor; -Messenger | 1 |
| 28***38 | Bracket Group-Mounting; -Lh | 1 |
296-8302 Bracket Gp-Mounting -Lh
| 14***30 | Retainer | 2 |
| 26***13 | Seal | 1 |
| 27***08 | Screw-Truss Head; (M5x0.8x10-mm) | 2 |
253-3323 Cab Ar-Enclosed Rops
| 25***23 | Cab Ar-Enclosed Rops | 1 |
| 25***05 | Cover Group-Access; -Rh | 1 |
| 27***08 | Screw-Truss Head; (M5x0.8x10-mm) | 2 |
334-6680 Cab Gp
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 25***10 | Cover | 1 |
| 33***80 | Cab Group | 1 |
240-6230 Cab Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 10 |
| 15***01 | Fastener-Hook & Loop | 1 |
| 22***55 | Louver Assem. | 2 |
327-7790 Cab Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 10 |
| 15***01 | Fastener-Hook & Loop | 1 |
| 24***69 | Retainer | 1 |
307-4279 Cab Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 10 |
| 15***01 | Fastener-Hook & Loop | 1 |
| 24***69 | Retainer | 1 |
243-2156 Compressor Gp-Refrigerant
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 19***75 | Washer-Hard; (6.6x15x6-mm Thk) | 2 |
| 24***56 | Compressor Group-Refrigerant | 1 |
183-5106 Compressor Gp-Refrigerant
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 12 |
| 16***73 | Louver As | 2 |
| 18***06 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
287-0554 Condenser Gp-Refrigerant
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 19***75 | Washer-Hard; (6.6x15x6-mm Thk) | 2 |
| 28***18 | Duct | 1 |
296-8319 Control & Mtg Gp-Elhyd -Hydrostatic Drive, Steering
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 4 |
| 26***27 | Hinge As | 1 |
| 27***23 | Lock As | 1 |
280-9450 Control & Mtg Gp-Joystick -Multipurpose Bucket
| 14***97 | Cap | 2 |
| 15***15 | Screw-Pan Head; (10-16x0.5-In) | 5 |
| 18***14 | Plate | 1 |
280-9673 Control & Mtg Gp-Joystick -Bucket
| 14***97 | Cap | 2 |
| 15***15 | Screw-Pan Head; (10-16x0.5-In) | 5 |
| 18***14 | Plate | 1 |
268-9349 Control & Mtg Gp-Joystick -Bucket-Bucket Lift, Tilt
| 14***97 | Cap | 2 |
| 15***15 | Screw-Pan Head; (10-16x0.5-In) | 5 |
| 18***14 | Plate | 1 |
282-6698 Control & Mtg Gp-Joystick -Bucket
| 14***97 | Cap | 2 |
| 15***15 | Screw-Pan Head; (10-16x0.5-In) | 5 |
| 18***14 | Plate | 1 |
316-3216 Control Gp-Bucket & Ripper
| 28***18 | Duct | 1 |
| 28***12 | Plate As | 1 |
| 29***91 | Seal | 1 |
268-9350 Control Gp-Direction & Speed -Hydrostatic Drive
| 19***75 | Washer-Hard; (6.6x15x6-mm Thk) | 4 |
| 26***23 | Plate As; (Lh) | 1 |
| 26***24 | Plate As; (Rh) | 1 |
306-2126 Control Gp-Handle -Hydrostatic Drive, Steering
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 2 |
| 12***97 | Knob; (Governor) | 2 |
| 12***06 | Bumper As | 2 |
307-4671 Control Gp-Handle
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 2 |
| 12***97 | Knob; (Governor) | 2 |
| 12***06 | Bumper As | 2 |
252-4559 Control Gp-Handle -Ripper
| 25***59 | Control Group-Handle; -Winch-Ripper, Winch-Ripper | 1 |
| 27***68 | Valve Group-Cab Heater | 1 |
| 28***57 | Coil As-Heater | 1 |
307-4673 Control Gp-Handle -Ripper
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 2 |
| 12***97 | Knob; (Governor) | 2 |
| 12***06 | Bumper As | 2 |
303-4017 Control Gp-Hydraulic -Hydrostatic Drive, Steering
| 10***55 | Cover-Speaker | 2 |
| 26***32 | Antenna As | 1 |
| 28***98 | Grommet | 1 |
253-8445 Control Gp-Hydraulic Hand -Bucket
| 10***55 | Cover-Speaker | 2 |
| 25***45 | Control Group-Hydraulic Hand; -Bucket | 1 |
| 28***98 | Clip | 8 |
284-9764 Control Gp-Joystick -Bucket
| 25***27 | Window Group-Cab; -Sealed | 1 |
| 28***64 | Control Group-Joystick; -Bucket | 1 |
| 32***88 | Mounting Group-Rops | 1 |
292-3543 Control Gp-Joystick -Ripper
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 2 |
| 12***97 | Knob; (Governor) | 2 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 9 |
253-8444 Control Gp-Joystick
| 10***55 | Cover-Speaker | 2 |
| 25***44 | Control Group-Joystick; -Multipurpose Bucket | 1 |
| 28***98 | Clip | 8 |
282-3145 Control Gp-Joystick -Bucket
| 28***45 | Control Group-Joystick; -Bucket | 1 |
| 29***69 | Insulation As; (Roof) | 1 |
| 29***70 | Insulation As; (Lh) | 1 |
259-5673 Control Gp-Joystick -Multipurpose Bucket
| 25***73 | Control Group-Joystick; -Multipurpose Bucket | 1 |
| 29***69 | Insulation As; (Roof) | 1 |
| 29***70 | Insulation As; (Lh) | 1 |
304-4162 Control Gp-Joystick -Hydrostatic Drive, Steering
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***97 | Valve As; (Low Side) | 1 |
| 10***99 | Valve As; (Air Conditioner Refrigerant) | 1 |
280-9179 Control Gp-Pedal -Speed Override, Brake
| 10***93 | Valve As | 1 |
| 10***94 | Gasket | 1 |
| 10***95 | Valve As | 1 |
257-6175 Control Gp-Pedal -Steering, Brake
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***97 | Valve As; (Low Side) | 1 |
| 10***99 | Valve As; (Air Conditioner Refrigerant) | 1 |
307-4324 Control Gp-Pedal -Brake
| 10***93 | Valve As | 1 |
| 10***94 | Gasket | 1 |
| 10***95 | Valve As | 1 |
257-6176 Control Gp-Steering
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 25***76 | Control Group-Steering | 1 |
| 5D***18 | Clip (Large) | 1 |
304-4001 Control Gp-Unprgmed Monitor -Messenger
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
284-9766 Cover Gp-Access -Rh
| 11***31 | Mount Assem. | 4 |
| 12***95 | Washer; (32x134x12-mm Thk) | 2 |
| 14***79 | Sleeve | 2 |
254-8605 Cover Gp-Access -Rh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 25***05 | Cover Group-Access; -Rh | 1 |
327-7795 Cover Gp-Cab
| 16***83 | Knob-Lumbar | 1 |
| 21***29 | Plug | 3 |
| 27***63 | Cushion As-Back | 1 |
251-1924 Cover Gp-Cab
| 25***24 | Cover Group-Cab | 1 |
| 27***44 | Washer-Special | 2 |
| 32***96 | Pin | 2 |
307-4284 Cover Gp-Cab
| 16***83 | Knob-Lumbar | 1 |
| 21***29 | Plug | 3 |
| 27***28 | Cushion As-Back; (Cloth) | 1 |
304-6586 Cover Gp-Console -Rh
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***07 | Holder | 1 |
294-3132 Cover Gp-Dash
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 6 |
| 21***14 | Switch As-Limit; (Seat Adjustment) | 1 |
| 26***59 | Spring | 1 |
327-7817 Dash Gp
| 14***81 | Knob-Select; (Radio) | 1 |
| 19***54 | Sleeve | 1 |
| 32***17 | Dash Group | 1 |
294-3127 Dash Gp
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 6 |
| 21***14 | Switch As-Limit; (Seat Adjustment) | 1 |
| 26***56 | Carrier As | 1 |
290-4412 Door Gp-Access -Rh
| 14***81 | Knob-Select; (Radio) | 1 |
| 19***54 | Sleeve | 1 |
| 29***12 | Door Group-Access; -Rh | 1 |
290-4414 Door Gp-Access -Lh
| 14***81 | Knob-Select; (Radio) | 1 |
| 19***54 | Sleeve | 1 |
| 29***14 | Door Group-Access; -Lh | 1 |
251-1922 Door Gp-Cab -Lh
| 20***28 | Harness As-Radio; (Fm) | 1 |
| 25***22 | Door Group-Cab; -Lh | 1 |
| 28***54 | Radio Group; -Am/Fm/Wb/Xm/ Cd Player | 1 |
251-1921 Door Gp-Cab -Rh
| 13***65 | Bumper | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
307-4281 Door Gp-Cab -Rh
| 20***28 | Harness As-Radio; (Fm) | 1 |
| 28***55 | Radio Group; -Am/Fm/Wb/Sirius/ Cd Player | 1 |
| 28***55 | Antenna As | 1 |
307-4282 Door Gp-Cab -Lh
| 30***82 | Door Group-Cab; -Lh | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
294-3128 Duct Gp-Cab Air
| 25***59 | Slider As | 1 |
| 26***67 | Bracket As; (Lh) | 1 |
| 26***69 | Bracket As; (Rh) | 1 |
290-4411 Enclosure Gp-Cab
| 12***06 | Bumper As | 1 |
| 13***30 | Grommet | 1 |
| 17***22 | Latch As; (Yellow) | 1 |
277-9969 Heater Gp-Cab
| 0T***89 | Cap Screw (2" Long) | 2 |
| 27***03 | Spacer; (11.7x19.8x25.4-mm Thk) | 1 |
| 27***69 | Heater Group-Cab | 1 |
251-1927 Installation Gp-Cab
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 6 |
327-7800 Installation Gp-Radio
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 20***03 | Washer-Hard; (10.2x22.22x2.38-mm Thk) | 2 |
251-1928 Installation Gp-Radio
| 25***28 | Installation Group-Radio | 1 |
| 25***48 | Seat Group-Suspension; -Cloth, Heated, Air | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
307-4288 Installation Gp-Radio
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 20***03 | Washer-Hard; (10.2x22.22x2.38-mm Thk) | 2 |
307-4285 Insulation Gp-Weather
| 03***26 | Retainer | 2 |
| 12***40 | Rod-Threaded; (3/8-17x1.5-In) | 2 |
| 14***37 | Bumper | 2 |
251-1925 Insulation Gp-Weather
| 16***98 | Seal-Lip Type | 2 |
| 1W***17 | Dowel-Hollow | 2 |
| 24***95 | Rod | 1 |
327-7787 Kit-Cab
| 16***98 | Seal-Lip Type | 2 |
| 1W***17 | Dowel-Hollow | 2 |
| 24***95 | Rod | 1 |
327-7798 Latch Gp
| 03***49 | Nut-Self Lock; (No.10.Unc) | 2 |
| 10***03 | Fastener | 19 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
276-3995 Lines Gp-Air Conditioner
| 27***95 | Lines Group-Air Conditioner | 1 |
| 28***87 | Seal; (45.5-Dm) | 0 |
| 28***88 | Glass | 1 |
276-5575 Lines Gp-Air Conditioner
| 27***75 | Lines Group-Air Conditioner | 1 |
| 28***87 | Seal; (45.5-Dm) | 0 |
| 28***88 | Glass | 1 |
303-4037 Lines Gp-Air Conditioner
| 28***87 | Seal; (45.5-Dm) | 0 |
| 28***93 | Plate | 1 |
| 28***96 | Bracket | 2 |
267-6281 Lines Gp-Heater
| 25***93 | Glass | 1 |
| 25***95 | Glass-Rear | 1 |
| 26***81 | Lines Group-Heater | 1 |
146-6149 Motor Gp-Window Wiper -Front
| 14***49 | Motor Group-Window Wiper; -Front | 1 |
| 28***82 | Seal; (16.5-Dm) | 0 |
| 28***72 | Film-Identification; (Caterpillar)(Front Window) | 1 |
322-1492 Motor Gp-Window Wiper -Rear
| 25***95 | Glass-Rear | 1 |
| 28***89 | Window As-Front; -Sealed | 1 |
| 29***78 | Glass; (Rh) | 1 |
327-7788 Mounting Gp-Rops
| 31***12 | Window As; (Rh) | 1 |
| 31***13 | Shim 1.225 mm , Rear Axle, Window As; (Lh) | 1 |
| 31***99 | Glass-Sliding; (Rh) | 1 |
251-1929 Mounting Gp-Rops
| 25***29 | Mounting Group-Rops | 1 |
| 25***95 | Glass-Rear | 1 |
| 28***89 | Window As-Front; -Sealed | 1 |
292-6402 Pan Gp-Backrest -Lumbar
| 12***03 | Arm-Window Wiper; (Front Window) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***49 | Motor Group-Window Wiper; -Front | 1 |
278-8515 Pan Gp-Backrest -Cloth
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***03 | Arm-Window Wiper; (Front Window) | 1 |
| 13***35 | Blade As-Wiper; (650-mm) | 1 |
278-8516 Pan Gp-Backrest -Cloth, Heated
| 12***03 | Arm-Window Wiper; (Front Window) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***49 | Motor Group-Window Wiper; -Front | 1 |
295-4475 Pan Gp-Seat -Cloth
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 17***60 | Motor As-Window Wiper; (Rear) | 1 |
295-4476 Pan Gp-Seat -Cloth, Heated
| 22***87 | Adapter-Tip; (K-80, 2-Strap, Center) | 6 |
| 22***88 | Adapter-Tip; (K-80, Rh) | 1 |
| 22***89 | Adapter-Tip; (K-80, Lh) | 1 |
303-1462 Radio Gp -Nacd
| 12***57 | Spill Plate | 1 |
| 22***94 | Adapter-Tip; -Flush Mount | 8 |
| 25***31 | Hinge As; (Lift, Inner, Rh) | 1 |
284-8954 Radio Gp -Am/Fm/Wb Cd Player
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 16***72 | Plate-Information; (Multipurpose Bucket) | 1 |
303-1463 Radio Gp -Nacd
| 22***45 | Guard As-Trash | 1 |
| 26***41 | Bucket As-General Purpose | 1 |
| 30***63 | Radio Group; -Nacd | 1 |
294-2006 Radio Gp -Am/Fm/Wb Cd Player
| 12***57 | Spill Plate | 1 |
| 25***31 | Hinge As; (Lift, Inner, Rh) | 1 |
| 25***32 | Hinge As; (Lift, Outer, Rh) | 1 |
284-8953 Radio Gp -Am/Fm/Wb Cd Player
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 16***72 | Plate-Information; (Multipurpose Bucket) | 1 |
| 28***53 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
284-8955 Radio Gp -Am/Fm/Wb Cd Player
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 15***96 | Film-Notice; (Lift Eye Location) | 4 |
| 28***55 | Radio Group; -Am/Fm/Wb/Sirius/ Cd Player | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 25***31 | Hinge As; (Lift, Inner, Rh) | 1 |
| 25***32 | Hinge As; (Lift, Outer, Rh) | 1 |
| 25***33 | Hinge As; (Lift, Inner, Lh) | 1 |
262-0766 Recliner Gp-Seat
| 22***72 | Hinge As; (Center, Lh) | 1 |
| 22***77 | Hinge As; (Center, Rh) | 1 |
| 22***78 | Hinge As; (Inner, Lh) | 1 |
256-7248 Screen Gp-Cab -Windshield
| 14***78 | Hinge | 2 |
| 14***77 | Bar | 4 |
| 25***48 | Screen Group-Cab; -Windshield | 1 |
272-2272 Seat Belt Gp -Retractable
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 16***72 | Plate-Information; (Multipurpose Bucket) | 1 |
| 26***40 | Bucket As-General Purpose | 1 |
295-4434 Seat Gp -Cloth
| 26***83 | Bowl As | 1 |
| 26***51 | Bit-End | 2 |
| 26***53 | Block | 1 |
295-4435 Seat Gp -Cloth, Heated
| 14***78 | Hinge | 2 |
| 14***77 | Bar | 4 |
| 26***04 | Bowl As | 1 |
255-8847 Seat Gp-Suspension -Cloth, Air
| 1V***98 | Block | 4 |
| 21***48 | Hinge As; (Outer, Lh) | 1 |
| 21***49 | Hinge As; (Outer, Rh) | 1 |
253-8442 Seat Gp-Suspension -Cloth, Air
| 22***85 | Bucket As-Refuse; -Light-Duty | 1 |
| 25***42 | Seat Group-Suspension; -Cloth, Air | 1 |
255-8848 Seat Gp-Suspension -Cloth, Heated, Air
| 25***48 | Seat Group-Suspension; -Cloth, Heated, Air | 1 |
| 26***12 | Bearing-Sleeve | 4 |
| 28***33 | Bulldozer As; -Waste Handling | 1 |
253-8443 Seat Gp-Suspension -Cloth, Heated, Air
| 1V***98 | Block | 4 |
| 21***48 | Hinge As; (Outer, Lh) | 1 |
| 21***49 | Hinge As; (Outer, Rh) | 1 |
284-7055 Support Gp-Hydraulic Control -Rh
| 1U***00 | Edge-Cutting | 2 |
| 25***62 | Guard; (Corner, Rh)(Corner, Rh) | 1 |
| 25***63 | Guard; (Corner, Lh)(Corner, Lh) | 1 |
298-2819 Support Gp-Seat -Suspension
| 1U***93 | Edge - Cutting | 2 |
| 25***64 | Guard; (Corner, Rh)(Rh) | 1 |
| 25***65 | Guard; (Corner, Lh)(Lh) | 1 |
289-2078 Support Gp-Steering Control -Lh
| 25***64 | Guard; (Corner, Rh)(Rh) | 1 |
| 25***65 | Guard; (Corner, Lh)(Lh) | 1 |
| 28***78 | Support Group-Steering Control; -Lh | 1 |
298-2818 Suspension Gp-Seat -Air
| 14***66 | Edge-Segment | 5 |
| 29***18 | Suspension Group-Seat; -Air | 1 |
| 30***26 | Edge-Segment | 2 |
281-1296 Tank Gp-Window Washer
| 26***33 | Edge-Segment | 2 |
| 28***96 | Tank Group-Window Washer | 1 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 14 |
334-6717 Window As-Front -Sealed
| 12***86 | Block As | 2 |
| 29***07 | Bolt; (M10x1.5x105-mm) | 2 |
| 29***85 | Spacer; (26x90x18-mm Thk) | 4 |
283-1389 Window As-Front -Sealed
| 12***86 | Block As | 2 |
| 28***89 | Window As-Front; -Sealed | 1 |
| 28***13 | Pin | 2 |
256-7407 Window Gp -Cab
| 19***17 | Plug | 2 |
| 25***07 | Window Group; -Cab | 1 |
| 28***49 | Ripper Group | 1 |
257-0627 Window Gp-Cab -Sealed
| 22***90 | Retainer-G.E.T. | 8 |
| 22***92 | Tip-Penetration; (K-90)(K-90) | 8 |
| 22***97 | Adapter-Tip; (K-90, Long, Center) | 6 |
307-4283 Wiper Gp-Window
| 22***90 | Retainer-G.E.T. | 8 |
| 22***99 | Tip-General Purpose; (K-90) | 8 |
| 22***97 | Adapter-Tip; (K-90, Long, Center) | 6 |
327-7794 Wiper Gp-Window -Rear
| 22***90 | Retainer-G.E.T. | 8 |
| 22***91 | Tip-Extra-Duty; (K-90) | 8 |
| 22***97 | Adapter-Tip; (K-90, Long, Center) | 6 |
251-1923 Wiper Gp-Window
| 22***89 | Tip-General Purpose; (K-80) | 8 |
| 22***90 | Retainer-G.E.T. | 8 |
| 25***23 | Wiper Group-Window | 1 |
Power Train
246-3419 Actuator Gp-Pump -Hydrostatic Drive
| 12***06 | Swashplate | 1 |
| 12***07 | Lever | 1 |
| 18***47 | Spring | 1 |
271-6180 Coupling Gp-Pump
| 25***97 | Segment-Sprocket | 5 |
| 27***80 | Coupling Group-Pump | 1 |
| 3S***82 | Bolt; (5/8-18x1.84-In) | 20 |
302-7298 Filter Gp-Oil -Power Train
| 30***98 | Filter Group-Oil; -Power Train, Winch-Power Train | 1 |
| 30***54 | Segment-Sprocket | 5 |
| 3S***82 | Bolt; (5/8-18x1.84-In) | 25 |
310-7715 Final Drive & Brake Gp
| 09***33 | Ring-Retaining | 1 |
| 12***94 | Plug; (Break Off) | 1 |
| 12***69 | Plug | 1 |
242-9492 Final Drive & Brake Gp
| 14***34 | Connector Group | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***39 | Connector As. | 1 |
281-2419 Final Drive & Brake Gp -Heavy-Duty
| 06***40 | Seal-O-Ring (Id=37.69mm) | 1 |
| 10***17 | Seal-O-Ring | 2 |
| 10***41 | Plug | 1 |
280-1667 Head Gp-Motor -Hydrostatic Drive
| 09***42 | Ring-Retaining | 2 |
| 11***37 | Spring; (Outer) | 2 |
| 14***93 | Piston-Stroking | 1 |
280-8137 Head Gp-Pump -Hydrostatic Drive, Lh
| 08***39 | Seal-O-Ring (Id=26.64mm) | 2 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 5 |
| 14***20 | Bolt-Socket Head; (M6x1x75-mm) | 4 |
280-8923 Head Gp-Pump -Hydrostatic Drive, Rh
| 16***15 | Retainer-Spring | 1 |
| 18***10 | Screw | 1 |
| 20***42 | Spring | 1 |
268-9990 Lines Gp-Charge Pressure
| 26***90 | Lines Group-Charge Pressure | 1 |
| 29***85 | Spacer; (26x90x18-mm Thk) | 4 |
| 2G***85 | Washer | 4 |
269-2000 Lines Gp-Control -Drive Motor, Steering
| 26***00 | Lines Group-Control; -Drive Motor, Steering | 1 |
| 30***75 | Bumper As | 1 |
| 6C***49 | Washer; (22x50x10-mm Thk) | 8 |
268-1197 Lines Gp-Drain
| 26***97 | Lines Group-Drain | 1 |
| 29***84 | Pin | 4 |
| 29***23 | Counterweight | 4 |
267-9958 Lines Gp-Hydrostatic
| 26***58 | Lines Group-Hydrostatic | 1 |
| 28***96 | Spacer; (72.5x116x18-mm Thk) | 4 |
| 29***85 | Spacer; (26x90x18-mm Thk) | 4 |
242-9487 Motor & Mtg Gp-Travel -Hydrostatic Drive
| 24***87 | Motor & Mtg Group-Travel; -Hydrostatic Drive | 1 |
| 28***52 | Plate | 2 |
| 8T***79 | Bolt; (M12x1.75x20mm)(To Turbocharder-Mounting Face) | 4 |
243-6645 Motor Gp-Piston -Hydrostatic Drive, Rh, Lh
| 24***45 | Motor Group-Piston; -Hydrostatic Drive, Rh, Lh | 1 |
| 28***54 | Plate | 2 |
| 8T***79 | Bolt; (M12x1.75x20mm)(To Turbocharder-Mounting Face) | 4 |
274-7769 Mounting Gp-Pump -Hydrostatic Drive
| 22***93 | Seal; (80.5-cm) | 0 |
| 27***21 | Hinge As | 1 |
| 27***23 | Lock As | 1 |
240-6533 Power Train Ar
| 14***88 | Plate | 2 |
| 1U***84 | Holder As; (Grease Gun) | 2 |
| 22***93 | Seal; (80.5-cm) | 0 |
269-2001 Pump & Mtg Gp-Power Train -Hydrostatic Drive
| 09***65 | Spacer; (17x40x3-mm Thk) | 1 |
| 09***07 | Nut; (M12x1.75-Thd) | 2 |
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
280-8745 Pump Gp-Charge -Hydrostatic Drive, Lh
| 09***00 | Washer; (12.7x30x4-mm Thk) | 8 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 3 |
| 28***45 | Pump Group-Charge; -Hydrostatic Drive, Lh | 1 |
280-8924 Pump Gp-Charge -Hydrostatic Drive, Rh
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 21***43 | Shim; (1-mm Thk) | 2 |
| 26***28 | Bracket | 1 |
261-3632 Pump Gp-Piston -Hydrostatic Drive, Rh
| 26***32 | Pump Group-Piston; -Hydrostatic Drive, Rh | 1 |
| 27***12 | Plate As | 2 |
| 27***81 | Cover As | 1 |
261-3631 Pump Gp-Piston -Hydrostatic Drive, Lh
| 13***40 | Locknut; (M8x1.25-Thd) | 1 |
| 21***43 | Shim; (1-mm Thk) | 2 |
| 26***31 | Pump Group-Piston; -Hydrostatic Drive, Lh | 1 |
264-6027 Pump Gp-Piston -Hydrostatic Drive
| 09***33 | Pin-Cotter | 1 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 16 |
| 26***27 | Pump Group-Piston; -Hydrostatic Drive | 1 |
280-1664 Rotating Gp-Motor -Hydrostatic Drive
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
| 16***15 | Nut; (M22x1.5-Thd) | 1 |
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 2 |
280-7988 Rotating Gp-Pump -Hydrostatic Drive, Lh, Rh
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
| 16***15 | Nut; (M22x1.5-Thd) | 1 |
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 2 |
308-6853 Segment Gp-Sprocket
| 28***20 | Guard As-Lower | 2 |
| 30***53 | Segment Group-Sprocket | 1 |
| 7X***32 | Bolt-Plt; (M20 X 2.5 X 130) | 8 |
262-7717 Segment Gp-Sprocket
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 4 |
| 25***97 | Plate | 2 |
| 26***17 | Segment Group-Sprocket | 1 |
270-0082 Valve & Mounting Gp -Hydrostatic Drive
| 27***82 | Valve & Mounting Group; -Hydrostatic Drive | 1 |
| 27***58 | Guard Group-Final Drive | 1 |
| 28***22 | Guard As; (Lh) | 1 |
301-7890 Valve Gp-Check
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 4 |
| 22***10 | Seal; (73-cm) | 0 |
| 28***53 | Plate | 1 |
283-0019 Valve Gp-Flushing -Hydrostatic Drive
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 4 |
| 22***10 | Seal; (73-cm) | 0 |
| 28***19 | Valve Group-Flushing; -Hydrostatic Drive | 1 |
283-0018 Valve Gp-Motor Control -Hydrostatic Drive
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 4 |
| 22***10 | Seal; (73-cm) | 0 |
| 28***18 | Valve Group-Motor Control; -Hydrostatic Drive | 1 |
246-4717 Valve Gp-Pump Control -Hydrostatic Drive
| 24***17 | Valve Group-Pump Control; -Hydrostatic Drive | 1 |
| 3W***72 | Guard As | 2 |
| 3W***75 | Guard As | 2 |
280-8746 Valve Gp-Pump Control -Pressure, Flow Compensator-Hydrostatic Drive
| 25***04 | Guard As | 2 |
| 25***05 | Guard As | 2 |
| 28***46 | Valve Group-Pump Control; -Pressure, Flow Compensator-Hydrostatic Drive | 1 |
6e-4402 Valve Gp-Relief -Charge Pressure-Hydrostatic Drive
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 16 |
| 25***28 | Cover As | 2 |
| 26***27 | Collar | 4 |
252-2237 Valve Gp-Solenoid
| 25***37 | Valve Group-Solenoid | 1 |
| 26***14 | Guard-Light; (Rh) | 1 |
| 28***02 | Guard-Light; (Lh) | 1 |
Service Equipment And Supplies
283-5571 Box Gp-Tool
| 28***71 | Box Group-Tool | 1 |
277-8366 Film Gp
| 27***66 | Film Group | 1 |
327-7805 Film Gp
| 32***05 | Film Group | 1 |
282-7769 Lines Gp-Diagnostic -Remote Control
| 28***69 | Lines Group-Diagnostic; -Remote Control | 1 |
242-9478 Plate & Film Gp
| 24***78 | Plate & Film Group | 1 |
258-9733 Plate & Film Gp -Biodegradable Hydrauliic Oil
| 25***33 | Plate & Film Group; -Biodegradable Hydrauliic Oil | 1 |
327-7789 Plate & Film Gp
| 32***89 | Plate & Film Group | 1 |
255-1047 Plate & Film Gp -International
| 25***47 | Plate & Film Group; -International | 1 |
255-1046 Plate & Film Gp -Nacd
| 25***46 | Plate & Film Group; -Nacd | 1 |
Steering And Braking System
321-3446 Kit-Hydraulic Control -Retrofit
| 09***93 | Clamp, Single | 2 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 6 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 1 |
268-2652 Lines Gp-Brake
| 17***68 | Valve Group-Check; (Reversing Fan) | 1 |
| 21***92 | Valve Group-Solenoid; -Hydraulic Fan | 1 |
| 26***52 | Lines Group-Brake | 1 |
267-6711 Manifold & Valve Gp -Hydrostatic Drive
| 12***51 | Kit-Seal; (Pressure Relief Valve) | 1 |
| 17***68 | Valve Group-Check; (Reversing Fan) | 1 |
| 20***86 | Valve Group-Relief; (Hydraulic Fan Motor) | 1 |
Undercarriage
236-7890 Adjustment Gp-Hydraulic Track
| 23***90 | Adjustment Group-Hydraulic Track | 1 |
346-2873 Bar Gp-Equalizer
| 34***73 | Bar Group-Equalizer | 1 |
| 6H***16 | Plug-Protective | 8 |
282-8646 Bar Gp-Equalizer
| 28***46 | Bar Group-Equalizer | 1 |
| 28***62 | Plate | 4 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 12 |
215-9599 Cap Gp-Track Roller -Systemone
| 1F***36 | Seal-Lip Type | 2 |
| 21***99 | Cap Group-Track Roller; -Systemone-Fine Grading | 1 |
| 22***99 | Bearing-Sleeve | 2 |
252-6139 Frame Gp-Track Roller
| 23***99 | Track Link | 2 |
| 25***39 | Frame Group-Track Roller | 1 |
| 25***12 | Link As-Track; (Systemone) | 1 |
314-9477 Frame Gp-Track Roller
| 23***13 | Shoe-Track | 38 |
| 23***99 | Track Link | 2 |
| 25***12 | Link As-Track; (Systemone) | 1 |
252-6138 Guard Gp-Track Guide
| 19***22 | Link-Track Master; (Clamp) | 2 |
| 25***38 | Guard Group-Track Guide | 1 |
| 25***24 | Bolt-Track Master; (M22x1.5x108-mm) | 4 |
253-3701 Guard Gp-Track Roller
| 23***99 | Track Link | 2 |
| 25***01 | Guard Group-Track Roller | 1 |
| 25***12 | Link As-Track; (Systemone) | 1 |
309-0644 Idler Gp-Front -Enhanced Extended Wear Life
| 10***93 | Poppet | 2 |
| 21***03 | Plug As | 2 |
| 21***04 | Spring | 2 |
309-0646 Idler Gp-Front -Enhanced Extended Wear Life
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
| 16***79 | Cap; (Accumulator) | 1 |
| 16***80 | Core | 1 |
304-7684 Idler Gp-Front -Enhanced Extended Wear Life
| 30***17 | Control Group-Hydraulic; -Hydrostatic Drive, Steering | 1 |
| 30***84 | Idler Group-Front; -Enhanced Extended Wear Life | 1 |
| 32***27 | Wiring Group-Cab | 1 |
304-7675 Idler Gp-Front -Enhanced Extended Wear Life
| 21***99 | Cap Group-Track Roller; -Systemone-Fine Grading | 14 |
| 23***57 | Roller Group-Track-Single Flange; -Systemone | 14 |
| 23***74 | Roller Group-Track Carrier; -Heavy-Duty, Systemone | 4 |
284-5698 Idler Gp-Front -Systemone, Rh
| 21***99 | Cap Group-Track Roller; -Systemone-Fine Grading | 14 |
| 23***57 | Roller Group-Track-Single Flange; -Systemone | 14 |
| 23***74 | Roller Group-Track Carrier; -Heavy-Duty, Systemone | 4 |
304-7688 Idler Gp-Front -Enhanced Extended Wear Life
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
| 17***15 | Strap; (Dual Clamp) | 1 |
309-0645 Idler Gp-Front -Enhanced Extended Wear Life
| 30***45 | Idler Group-Front; -Enhanced Extended Wear Life | 1 |
284-5697 Idler Gp-Front -Systemone, Lh
| 23***99 | Track Link | 2 |
| 23***04 | Shoe-Track | 38 |
| 25***12 | Link As-Track; (Systemone) | 1 |
252-6251 Idler Gp-Front -Systemone
| 23***99 | Track Link | 2 |
| 25***51 | Idler Group-Front; -Systemone | 1 |
| 25***12 | Link As-Track; (Systemone) | 1 |
256-9612 Link As-Track -Systemone
| 25***12 | Link As-Track; (Systemone) | 1 |
| 25***75 | Control Group-Pedal; -Steering, Brake | 1 |
| 26***50 | Control Group-Direction & Speed; -Hydrostatic Drive | 1 |
234-9679 Link As-Track Box -Link Box
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 4 |
| 16***95 | Seal As-Buffer | 1 |
| 16***04 | Seal-U-Cup | 1 |
264-9763 Link As-Track Box -Link Box
| 26***63 | Link As-Track Box; -Systemone | 1 |
351-0963 Link As-Track Box -Link Box
| 10***44 | Grommet | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 2 |
297-4786 Link As-Track Box -Link Box
| 14***39 | Head | 1 |
| 16***08 | Seal As-Buffer | 1 |
| 16***19 | Seal-U-Cup | 1 |
351-0964 Link As-Track Box -Link Box, Offset
| 12***22 | Cylinder As; (Rh) | 1 |
| 16***00 | Seal Assem. | 1 |
| 16***07 | Seal-U-Cup | 1 |
5q-9016 Pivot Bar Gp
| 12***23 | Cylinder As; (Lh) | 1 |
| 16***00 | Seal Assem. | 1 |
| 16***07 | Seal-U-Cup | 1 |
235-5974 Roller Gp-Track Carrier -Heavy-Duty, Systemone
| 09***79 | Pin-Spring | 1 |
| 09***33 | Seal-O-Ring (Id=139.60mm) | 1 |
| 10***44 | Grommet | 1 |
288-0948 Roller Gp-Track-Double Flange -High Heat
| 25***72 | Valve Group-Bank 3; -Bucket Control | 1 |
| 26***45 | Lines Group-Front; -Lift Arms | 1 |
| 28***57 | Guard Group-Lines; -Front | 1 |
288-0936 Roller Gp-Track-Double Flange -Tall
| 24***01 | Cylinder Group-Lift; -Lh | 1 |
| 26***19 | Lines Group-Lift Cylinder | 1 |
| 26***04 | Mounting Group-Hydraulic Tank | 1 |
288-0935 Roller Gp-Track-Double Flange
| 28***21 | Plate As | 1 |
| 28***24 | Plate As | 1 |
| 28***35 | Roller Group-Track-Double Flange; -Heavy-Duty | 1 |
288-0946 Roller Gp-Track-Double Flange -Cold Weather
| 25***73 | Valve Group-Bank 2; -Bucket Control | 1 |
| 28***51 | Cover Group-Access; -Loader Frame | 1 |
| 28***46 | Roller Group-Track-Double Flange; -Cold Weather | 1 |
288-0945 Roller Gp-Track-Single Flange -Cold Weather
| 14***27 | Connector Group | 2 |
| 14***28 | Connector Assem. | 4 |
| 14***08 | Plug As. | 2 |
288-0947 Roller Gp-Track-Single Flange -High Heat
| 10***96 | Tee-O-Ring | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***57 | Elbow As. | 1 |
288-0934 Roller Gp-Track-Single Flange
| 25***60 | Valve Group-Bank 4; -Bucket Control, Ripper | 1 |
| 25***39 | Control & Mtg Group-Electronic; -Ripper | 1 |
| 26***24 | Lines Group-Rear Attachment | 1 |
235-4157 Roller Gp-Track-Single Flange -Systemone
| 23***57 | Roller Group-Track-Single Flange; -Systemone | 1 |
| 24***42 | Valve Group-Bank 3; -Bucket Control, Ripper | 1 |
| 25***39 | Control & Mtg Group-Electronic; -Ripper | 1 |
259-0995 Scraper Gp-Idler
| 19***27 | Hose As | 2 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 2 |
| 25***95 | Scraper Group-Idler | 1 |
309-1535 Scraper Gp-Idler -Enhanced Extended Wear Life
| 11***52 | Spacer; (13x25x22.14-mm Thk) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 14***38 | Clip-Loop | 3 |
252-6140 Track Adjuster & Recoil Gp
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 4 |
| 20***78 | Elbow | 1 |
| 20***79 | Elbow As | 1 |
257-4126 Track Gp -2-Required, Systemone
| 10***52 | Tee-Union | 1 |
| 14***67 | Clamp; (Hose) | 2 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
256-9610 Track Gp -2-Required, Systemone
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 1 |
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 4 |
256-9611 Track Gp -2-Required, Systemone
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 11***93 | Hose As | 1 |
293-2308 Track Gp -2-Required, Systemone
| 03***57 | Washer; (13x26x6-mm Thk) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
292-4078 Track Gp -2-Required, Systemone
| 14***67 | Clamp; (Hose) | 2 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
293-2313 Track Gp -2-Required, Systemone
| 03***57 | Washer; (13x26x6-mm Thk) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
257-4125 Track Gp -2-Required, Systemone
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 2 |
314-9521 Undercarriage Ar
| 10***81 | Spacer; (13.5x25x40-mm Thk) | 4 |
| 14***88 | Elbow Group | 4 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 4 |
240-6536 Undercarriage Ar
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 3 |
317-0031 Undercarriage Ar
| 13***62 | Connector | 1 |
| 14***57 | Elbow As. | 1 |
| 16***48 | Connector As. | 1 |
Work Tools
3g-8956 Edge Gp-Bit & Cutting
| 3G***56 | Bit & Cutting Edge Group | 1 |
3g-3625 Edge Gp-Bit & Cutting
| 3G***25 | Bit & Cutting Edge Group | 1 |
257-1766 Adapter Gp-Tip -K-80
| 11***59 | Retainer Assembly; (G.E.T.) | 1 |
| 13***08 | Pin | 1 |
| 25***66 | Adapter Group-Tip; -K-80 | 1 |
286-0047 Bucket Ar-Multipurpose
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 18***46 | Latch As | 1 |
| 28***47 | Bucket Ar-Multipurpose | 1 |
286-0048 Bucket Ar-Multipurpose
| 25***61 | Film-Information; (Cat Power, Acert Technology) | 2 |
| 28***48 | Bucket Ar-Multipurpose | 1 |
| 29***90 | Film-Identification; (Cat, Rh) | 1 |
286-0049 Bucket Ar-Multipurpose -Waste Handling
| 16***68 | Plate-Identification; (Sequence)(Open Rops) | 1 |
| 20***26 | Film-Instruction; (Machine Security, Console) | 1 |
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
264-4741 Bucket As-General Purpose
| 22***17 | Film; (Warning) (Seatbelt) (On Lh Post Inside Cab) | 1 |
| 22***13 | Film; (Warning) (Jump Start) (Inside Of Lh Battery Box Cover) | 1 |
| 22***05 | Film; (Warning) (Universal) (On Lh Post Inside Cab) | 1 |
264-4740 Bucket As-General Purpose
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 2 |
| 15***64 | Film; (Instruction) (Hydraulic Oil) (On Forward Of And Above The Hydraulic Tank Sight Gage On Tank Surface) | 1 |
| 19***86 | Film; (Safety) (To Right And Left Of Fuel Tank) | 2 |
254-7176 Bucket As-General Purpose -Flush Mounted Teeth
| 12***62 | Washer; (19x34x3-mm Thk) | 8 |
| 12***30 | Fitting Group-Hydraulic; (Quick Disconnect) | 8 |
| 14***19 | Connector As | 1 |
254-3229 Bucket As-General Purpose
| 14***19 | Connector As | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***61 | Elbow Group | 1 |
220-4885 Bucket As-Refuse -Light-Duty
| 22***85 | Bucket As-Refuse; -Light-Duty | 1 |
| 22***45 | Film-Warning; (Seat Belt, International) | 1 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
286-7488 Bucket Gp -Waste Handling
| 14***68 | Film-Identification; (Biodegradable Hydraulic Oil) | 1 |
| 28***88 | Bucket Group; -Waste Handling | 1 |
264-4742 Bucket Gp-General Purpose
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 22***61 | Film-Instruction; (Cab Unlock) | 2 |
| 26***42 | Bucket Group-General Purpose | 1 |
286-7482 Bucket Gp-Multipurpose
| 28***82 | Bucket Group-Multipurpose | 1 |
286-7485 Bucket Gp-Multipurpose
| 28***85 | Bucket Group-Multipurpose | 1 |
220-2628 Bucket Gp-Refuse -Light-Duty
| 22***28 | Bucket Group-Refuse; -Light-Duty | 1 |
286-7833 Bulldozer As -Waste Handling
| 28***33 | Bulldozer As; -Waste Handling | 1 |
286-7483 Bulldozer Gp -Multipurpose Bucket
| 28***83 | Bulldozer Group; -Multipurpose Bucket | 1 |
286-7486 Bulldozer Gp
| 28***86 | Bulldozer Group | 1 |
286-7489 Bulldozer Gp -Waste Handling
| 28***89 | Bulldozer Group; -Waste Handling | 1 |
8e-5792 Edge Gp-Cutting
| 8E***92 | Edge Group-Cutting | 1 |
264-6234 Edge Gp-Cutting
| 26***34 | Edge Group-Cutting | 1 |
133-0682 Edge Gp-Cutting -Heavy Duty
| 13***82 | Edge Group-Cutting; -Heavy Duty | 1 |
8e-5788 Edge Gp-Segment
| 8E***88 | Edge Group-Segment | 1 |
282-8650 Mounting Gp-Ripper
| 28***50 | Mounting Group-Ripper | 1 |
254-5253 Ripper Ar
| 25***53 | Ripper Ar | 1 |
282-8649 Ripper Gp
| 28***49 | Ripper Group | 1 |
269-4610 Tip Gp -K-80, Extra-Duty
| 26***10 | Tip Group; -K-80, Extra-Duty | 1 |
259-5874 Tip Gp-General Purpose -K-90
| 25***74 | Tip Group-General Purpose; -K-90 | 1 |
269-4609 Tip Gp-Penetration -K-80
| 26***09 | Tip Group-Penetration; -K-80 | 1 |
269-4606 Tooth Gp -K-80
| 26***06 | Tooth Group; -K-80 | 1 |
279-8743 Tooth Gp -K-90
| 27***43 | Tooth Group; -K-90 | 1 |
253-0092 Tooth Gp -K-90, Penetration
| 25***92 | Tooth Group; -K-90, Penetration | 1 |
233-7151 Tooth Gp-Long -K-90
| 23***51 | Tooth Group-Long; -K-90 | 1 |
253-0091 Tooth Gp-Long -K-90
| 25***91 | Tooth Group-Long; -K-90 | 1 |
3g-0109 Tooth Gp-Ripper -Curved
| 3G***09 | Tooth Group-Ripper; -Curved | 1 |
963D serial number reference
The PIN/serial plate on a 963D is a riveted metal tag on the left side of the machine, on the support arm just in front of the cab, with the number also stamped into the frame beside the plate. On machines from 2002 onward the full 17-character PIN reads as the 3-letter manufacturer code, the model code, then the 3-letter serial prefix plus the unit's sequential digits (for example LCS followed by the unit number); older-style tags show just the 8-character prefix-plus-serial form. The 3-letter prefix identifies the production family - for the 963D that is LCS.
| Prefix | Identifies | Notes |
|---|---|---|
| LCS | 963D Track-Type Loader (Standard/General Purpose and WH Waste Handler arrangement) | Single PIN range for the 963D, LCS1-UP, spanning the model's production life (roughly 2007 into the mid-2010s, ahead of the 963K generation; exact first/last-unit cutoff not documented in public sources - confirm with a dealer for an exact build date). Engine is the Cat C6.6 ACERT, in-line six-cylinder, common-rail fuel system, rated at 141 kW (189 hp) flywheel power. Undercarriage is the 7-roller SystemOne design with oscillating track roller frames, a step up from the prior 963C chassis's 6-roller conventional undercarriage. The WH Waste Handler factory arrangement (added guarding/seals for transfer-station and landfill duty) is built on the same base machine and carries the same LCS prefix family - no separate prefix documented for it. No distinct Std/XL/LGP prefix split exists for the 963D itself; the low-ground-pressure wide-track variant seen in dealer listings belongs to the later, current-generation 963 platform (different engine family), not a 963D-prefixed unit - if your plate does not read LCS, confirm the configuration with your dealer. |
Frequently asked questions
What engine does the Caterpillar 963D use?
The 963D runs the Cat C6.6 ACERT, a 6.6-liter common-rail six-cylinder diesel rated around 141 kW (189 hp) at 2000 rpm, meeting Tier 3/Stage IIIA emissions. This replaced the 3126B engine used in the earlier 963C.
What is the operating weight of the Caterpillar 963D?
Operating weight is roughly 20,220 kg (44,577 lb). Actual weight varies by bucket type, counterweight, and track shoe width, so treat this as a class figure rather than an exact number for every configuration.
What replaced the Caterpillar 963D?
Cat replaced the 963D with the 963K, which moved to the C7.1 ACERT engine and Tier 4 emissions controls. The 963K was later followed by Cat's current-generation 963 track loader.
What 963D owners discuss
Is the 963D hydrostatic or a torque-converter powershift, and how reliable is that drive system in practice?
The 963D uses an electronically controlled hydrostatic drive with independent control of each track, not a torque-converter powershift. Operators like the fast, infinitely variable speed control and one-lever steering with on-the-go directional changes and counter-rotation. The trade-off owners bring up repeatedly: a failed hydrostatic drive pump or track motor is one of the most expensive repairs on the machine, and shops that really understand hystat systems are harder to find than ones comfortable with a conventional powershift. Case-drain pressure on the hydrostatic circuit should read low at idle and stay low as rpm climbs; a case-drain reading that climbs well into the tens of psi under engine speed points to internal pump or motor wear rather than a simple external leak, though exact spec varies by configuration and should be checked against the machine's own service manual. The 963D also carries a reputation as a fuel-hungry machine relative to the smaller 953, which owners weigh against its higher output. Have your dealer verify hydrostatic case-drain pressures and drive response on both tracks before committing to a rebuild-versus-replace decision on the drive system.
What hydraulic and drive-train oil do owners actually run in the 963D, and what's the common mistake?
Consensus on fluid is consistent: run a 10-weight hydraulic oil (Cat HYDO-type) in the hydrostatic drive and pump-drive circuit, not a 30-weight. A 30W oil is described repeatedly as too heavy for the hystat circuit and slows its response. A 10W transmission/drive-train oil (Cat TDTO-type) is an accepted substitute in the hydrostatic circuit; the extra clutch and disc-brake additive package it carries isn't needed there but does no harm. The final drives run a heavier gear/transmission oil, roughly 11.5 L (about 3 US gal) per side, and are a separate fill from the hydrostatic charge circuit. Exact viscosity grade and fill quantity can vary by production run, so confirm against the specific machine's operation and maintenance manual rather than assuming one spec fits every 963D built.
What undercarriage wear pattern is typical for the 963D, and how much should a buyer budget for it?
Undercarriage is treated as the single biggest wear-cost line on a 963-family loader. The 963D's oscillating roller-frame design rides smoother than a rigid frame, but front idlers and bottom rollers still wear noticeably faster than top carrier rollers because they carry more ground-contact load. Field inspections on used machines commonly turn up front idlers and bottom rollers down in the 30-45% remaining range while top rollers still show close to full remaining life at the same hour count. Cat's SystemOne-type undercarriage is generally projected around 4 years or 6,000 hours (or full wear, whichever comes first), but that projection moves a lot with ground conditions and application severity, so treat it as a starting point, not a guarantee. A full undercarriage replacement (rollers, idlers, tensioner/seal kit, track segments) is a five-figure expense in the field. Get a wear-percentage survey tied to actual hours from a qualified tech before valuing a used unit on hour meter alone.
Does the engine and its quirks differ across 963D production, and what engine problems come up most?
Engine spec is not uniform across every machine wearing the 963D model letter. The D designation spanned an emissions-driven engine transition: earlier production is associated with a mechanical/electronic Cat inline-six rated in the high-150s hp range, while later production carries the Cat C6.6 ACERT rated near 141 kW (189 hp). Because the model letter didn't change with the engine update, always confirm the actual engine family from the machine's dataplate or ECM rather than assuming from the model name alone, and treat any single horsepower figure as varying by series. Two engine complaints recur: a top-end tick that grows as rpm climbs toward wide-open throttle, which techs have traced to tight intake valve lash rather than a lifter or injector fault (injector cut and fuel-flow tests can pass clean while a valve lash reset resolves or reduces the noise); and turbocharger complaints where coolant temperature climbs after sustained heavy load followed by oily exhaust smoke and soot collecting around the turbo, usually traced to a leaking turbo oil feed line or a blown mounting gasket coking the turbo rather than outright turbo failure. Have your dealer verify valve lash and turbo oil-feed integrity with a proper inspection before assuming either needs a full rebuild.
What electrical or sensor issues come up on the 963D, and how should they be diagnosed?
Complaints center less on outright ECM or sensor failure and more on wiring and connectors. The recurring field lesson: when a diagnostic code implicates a sensor, damaged wiring or a corroded/loose connector is the more likely root cause than the sensor itself, and outright ECM failure is called out as unlikely. Proper diagnosis needs Caterpillar's electronic service tool to pull the full code (module, component, and failure-mode identifiers) and confirm whether a fault is a real component failure or a wiring problem before parts get replaced on guesswork. Because the hydrostatic drive is electro-hydraulically controlled, a wiring or connector fault in that control circuit can show up as a drive symptom, such as the machine not engaging or moving only a short distance before stopping, rather than as a dash warning light, which sends owners chasing a mechanical drive-train cause first when the fault is actually electrical.
What loader-arm wear pattern shows up on the 963D and is it serious?
Loose play developing in the lower loader arms where they meet the quick-coupler plate is a commonly reported wear point, traced to worn pins and bushings rather than a structural defect in the arms themselves. Community advice is to grease on schedule and catch play early, since a pin seized in its bore turns a routine bushing swap into a job needing a hydraulic press or, in stuck cases, cutting the pin out. This is a load-bearing lift linkage, so have your dealer verify pin and bushing wear tolerances and bore condition before the machine goes back into full lift-and-carry duty.
What should a buyer check before purchasing a used 963D?
Field-tested checklist from owners and technicians: get a documented undercarriage wear survey (percentage remaining on rollers, idlers, sprockets, chain or rail) tied to actual hours and the date of the last major undercarriage work; cut open a fresh hydraulic/hydrostatic filter after a short run to look for metal and pull a fluid sample for analysis; check hydrostatic case-drain pressure and drive response on both tracks under load, including counter-rotation steering; check the loader arm pins and bushings for play at the coupler plate; confirm which engine family the specific machine carries and match its service history (turbo condition, injectors, valve lash) to that engine rather than assuming from the model letter, since 963D production spans more than one engine build; and review maintenance records and serial number history rather than relying on the hour meter alone. Run the machine through a full work cycle, including full lift height and both steering extremes, before agreeing on price. Have your dealer verify hydrostatic drive and undercarriage condition with a full inspection before final purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 963D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.