Caterpillartrack-type loadertrack loader
Caterpillar 963C
Maintenance schedule, common problems & OEM parts breakdown
Caterpillar's 963C is a mid-size track-type (crawler) loader, a hydrostatic-drive dozer/loader hybrid built for material handling, stripping, stockpiling and general earthmoving on soft or uneven ground where a wheel loader loses traction. Power comes from a Cat 3126B ATAAC turbocharged-and-aftercooled diesel, roughly 7.2 L, rated near 118 kW (158 hp) at 2000 rpm; early production under the 2DS serial prefix instead used the Cat 3116 turbocharged diesel before the line moved to 3126B ATAAC power under BBD-prefix, Tier II-compliant production. Operating weight runs roughly 19.0-19.6 t (about 41,900-43,200 lb), varying with bucket, track shoe width, and standard versus Low Ground Pressure (LGP) undercarriage. Cat built the 963C from 1997 into the early 2000s, replacing the 963B and later stepping aside for the 963D (Cat C6.6 ACERT engine). Buyers could order a standard or LGP undercarriage, single, double or triple grouser shoes, and general-purpose or multi-purpose buckets.
Through its run the 963C's defining change was the engine transition from the 3116 turbocharged diesel (2DS-prefix machines) to the 3126B ATAAC (BBD-prefix machines) alongside Tier II emissions compliance, plus running refinements to the electronic hydrostatic drive control, computerized monitoring and cab. Against its 963B predecessor, the C added electronic hydrostatic control, variable hydraulic track motors, a speed-mode switch and a larger fuel tank. In today's used and parts market the 963C still moves because it runs on two widely serviced Cat engines with strong reman and aftermarket support, and because pure hydrostatic drive, with no powershift transmission or torque converter, keeps the drivetrain parts list simpler than gear-drive competitors. Most surviving units are well past mid-life hours, so demand centers on hydrostatic pump/motor, final drive and undercarriage rebuild parts rather than complete machines.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 963C specifications
Engine
| Engine model | Cat 3126B ATAAC (air-to-air aftercooled, turbocharged), 6-cylinder diesel. Fitted from the Tier 2-compliant BBD-prefix build (introduced late Q3 2003), replacing the earlier 3116-based build under the same 963C nameplate. |
| Displacement | 7.2 L (approx. 439-442 cu in, minor rounding across spec-sheet revisions). |
| Power - rated | 118 kW (158 hp) net at 2000 rpm. |
| Power - lugged/working range | Up to 119 kW (159 hp) net when lugged down into the working range. |
| Rated engine speed | 2000 rpm. Reduced from 2200 rpm versus the prior (3116-powered) build when the Tier 2 3126B was introduced. |
| Fuel system / controls | Hydraulic-actuated Electronic Unit Injectors (HEUI), 3 valves per cylinder, ADEM III electronic engine control. |
| Emissions | US EPA Tier 2. The Tier 2 update also brought remote engine oil filters, an under-hood muffler, an improved starter and a brushless alternator. |
Weights
| Operating weight - standard configuration | 19,589 kg (43,186-43,194 lb) with general-purpose bucket, teeth and standard equipment. Small variance between spec-sheet sources is rounding, not a config difference. |
| Static tipping load | 13,564 kg (29,904 lb), full turn, standard configuration. |
| XL / LGP configuration weights | Not separately published for the C series in available factory literature. Only a standard-track operating weight is documented for the 963C; LGP wide-shoe undercarriage was offered on other 963 generations but no distinct 963C LGP weight figure was found. |
Dimensions
| Length with bucket on ground | 6.34 m (20.8 ft). |
| Length to front of track | 4.62-4.63 m (15.2 ft). |
| Width to outside of tracks | 2.30 m (7.55-7.6 ft), standard 550 mm shoes. |
| Height to top of cab | 3.40-3.41 m (11.15-11.2 ft). |
| Ground clearance | 0.40-0.43 m (15.8-16.8 in); sources vary slightly. |
| Track shoe width - standard | 550 mm (21.7 in). |
| Track shoe width - wide/LGP option | Not documented as a separate published figure specifically for the C series; treat any wide-shoe number quoted for other 963 generations as not confirmed for the 963C. |
Performance
| Maximum travel speed | 9.5-9.8 km/h (5.9-6.1 mph). Hydrostatic drive with two variable-displacement piston pumps/motors - travel is continuously variable in each direction rather than stepped gears, so no separate per-gear F/R speed table applies. |
| Reduced-speed work mode | Work ('turtle') mode caps travel at 6.6 km/h (4.1 mph), about 67% of maximum rated speed. |
| Ground pressure - standard shoes | 72.4 kPa (10.5 psi) on 550 mm shoes. |
| Ground pressure - LGP/wide shoes | No distinct 963C-specific figure found in available spec sheets; not published separately from the standard-shoe figure above. |
| Breakout force | 191.9 kN (approx. 43,100-43,150 lbf) with the standard general-purpose bucket. |
| Drawbar pull / gradeability | Not published by Cat for this track loader line. Unlike dozer spec sheets, the 953C/963C track loader Specalog does not list a drawbar-pull or gradeability figure. |
Buckets
| Machine type note | 963C is a track-type loader (bucket machine), not a dozer. No S/SU/A/VPAT dozer blade is offered; the bucket is the primary work tool in factory literature. |
| General-purpose bucket | Heaped capacity 2.37-2.45 m3 (3.1-3.2 yd3); struck capacity approx. 2.06 m3 (2.7 yd3). Minor spread reflects different spec-sheet revisions. |
| Multi-purpose bucket | Heaped capacity approx. 2.0 m3 (2.6 yd3). |
| Waste handler bucket arrangement | A factory waste-handler version of the 963C was offered with reinforced guarding for landfill/demolition use; distinct bucket capacity figures for this arrangement were not corroborated across sources, so none are stated here. |
Service capacities
| Fuel tank | 315 L (83.2-83.3 gal). |
| Cooling system | 30.5-31 L (8.1 gal). |
| Engine oil (crankcase, with filter) | 28 L (7.4 gal). |
| Hydraulic system - total | 160 L (42.3 gal). |
| Final drive - each side | 15 L (4 gal). |
| Implement hydraulic pump flow | 215 L/min (56.8 gpm). |
| Implement hydraulic relief pressure | 21,000 kPa (3045 psi). |
| Loader cycle times | Raise approx. 6.6 sec, dump approx. 1.3 sec, lower approx. 2.1 sec. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
963C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 28 L (7.4 US gal) — Cat 3126B ATAAC turbocharged diesel, 6-cylinder, the engine used on this 963C generation. | Cat DEO (Diesel Engine Oil). SAE 15W-40 is the standard year-round grade for this engine class; SAE 10W-30 is preferred in cooler ambient ranges (roughly -18C/0F up to 40C/104F) per Cat's viscosity-by-temperature guidance, with 15W-40 covering warmer ranges (about -9.5C/15F up to 50C/122F). Use the highest viscosity grade allowed for the expected ambient temperature. |
| Cooling system | 30.5 L (8.1 US gal). | Cat ELC (Extended Life Coolant), factory fill on this model. Rated service life runs to about 6000 hours or 6 years; a coolant extender treatment is applied at roughly the 3000-hour/mid-life point to reach the full interval. Do not mix with conventional coolant. |
| Fuel tank | 315 L (83.2 US gal). The C-series update carried a single, enlarged fuel tank versus the prior model; this figure holds for 963C and the later 963C Series II. | Diesel fuel meeting the specified sulfur/cetane requirements for the engine's emissions tier. |
| Power train and hydraulic system (combined tank) | 160 L (42.3 US gal) total. The 963C runs hydrostatic drive, not a powershift transmission, so the OMM does not carry separate powershift-transmission or bevel-gear/steering-clutch compartments as on Cat's mechanical track-type tractors — power train (hydrostatic drive) and implement hydraulics share one common reservoir. | Cat TDTO (Transmission/Drive Train Oil). SAE 10W is the typical fill grade, keeping one oil common across the power train and hydraulic compartments; SAE 30 is used where sustained high ambient temperatures call for a heavier grade. |
| Final drives (each side) | 15 L (4 US gal) per side. | Cat TDTO, graded by ambient temperature (SAE 10W/30/50 range) consistent with the machine's other drive-train compartments. |
| Pivot shaft / track roller frame | Not documented as a standalone oil-filled compartment for this model in available sources — serviced as a grease point on the roller frame/equalizer bar area, not a sump with a refill volume. | Cat MPGM (Multipurpose Grease) at the scheduled grease interval; verify exact point count and interval against the OMM's lubrication chart. |
| Grease points (general) | Not a fill volume — applied per grease-gun service interval per the OMM's lubrication chart. | Cat MPGM (Multipurpose Grease). Cold-climate operation may call for Cat's low-temperature MPGM formulation. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 963C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
Servicing the 963C beyond the schedule
Predictive Maintenance & Fluid Analysis
Track hydrostatic drive health on the 963C through regular oil sampling - the charge pump, piston pumps and track motors shed brass and steel particles into the return filter long before outright failure. Sample hydraulic and hydrostatic power control unit oil at every scheduled change, watch for water or fuel dilution in the 3126B ATAAC crankcase, and log coolant condition since Extended Life Coolant breaks down at the 3,000 and 6,000-hour marks. Trend final drive gear oil metal content to catch bearing wear before it migrates into the track motor housing.
Corrective & Common Repairs
Most 963C failures trace to the hydrostatic system: a whining charge pump, metallic glitter in the return filter, or loss of drive on one track usually means a worn piston shoe or scored swashplate in a pump or track motor. Hydraulic pump shaft seals can leak into the final drive gearbox and take out bearings if ignored. Reversing-solenoid and wiring faults on the hydrostatic control can mimic pump failure - check electrical continuity before pulling a pump. Confirm turbocharger boost and fuel filter condition on the 3126B before condemning drivetrain components.
Overhaul & Rebuild Points
Plan 963C rebuilds around the hydrostatic drive pumps and track motors, final drive planetary sets, and undercarriage wear items - chains, rollers, idlers and sprockets absorb the brunt of crawler-loader duty cycles. The 3126B ATAAC responds well to an in-frame overhaul (liners, injectors, turbocharger) once oil-sample trends show rising wear metal. Because the loader runs no powershift transmission, drivetrain rebuild dollars go almost entirely into the hydrostatic circuit and final drives rather than clutch packs or torque converters.
Seasonal & Environment Servicing
In cold climates, warm the 3126B and cycle the hydrostatic system at low load before working the 963C hard - cold, thick oil accelerates charge-pump wear. Switch to a lighter-viscosity engine and hydraulic oil grade for winter per the OMM chart, and keep the Extended Life Coolant mix tested for freeze protection. In wet or abrasive ground, LGP shoes cut ground pressure and slippage, but grit demands more frequent track tension checks and undercarriage washdowns to keep chain pins from grinding prematurely.
963C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 179-9348 | Valve-Drain | Fuel system service | Check fitment → |
| 6I-0273 | Filter Element As-Air | Air intake service | Check fitment → |
| 116-7376 | Filter Element-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
963C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 030-0096 (FMI 03) | Monitoring system (MID 030) reports the fuel level sender circuit reading above the valid range. | Open circuit at the fuel tank sender, corroded sender connector, or a chafed sender wire. | Check the sender connector and wiring for opens and corrosion, test sender resistance through its float travel, replace the sender if it reads open or out of range. |
| 030-0248 (FMI 02) | Monitoring system reports an intermittent or erratic signal on the data link between the display panel and the machine ECMs. | Loose, corroded, or damaged data link connector, a chafed harness, or a poor ground at the monitor panel. | Reseat and inspect data link connectors at the monitor and ECMs, check the harness for chafe points, clean grounds, clear the code and confirm it does not return. |
| 247-9 | A data link message is arriving at an abnormal update rate on the CAT Data Link/SAE J1939 backbone; not tied to one sensor. | Intermittent wiring fault on the data link backbone, a marginal ECM connector, or a module holding the bus low. | Connect Cat ET to identify which ECM is logging the fault, then inspect that ECM's data link connector and backbone wiring before replacing any module. |
| CID 0100 - Engine Oil Pressure | Engine oil pressure reads below the acceptable range for current engine speed; the monitor lights the engine oil pressure warning and the ADEM III engine control logs the fault. | Low oil level, plugged oil filter, worn oil pump, or a failed or miswired oil pressure sensor. | Shut the machine down per the warning procedure, check oil level and filter condition first, confirm sensor accuracy with Cat ET before replacing the pump. |
| CID 0110 - Engine Coolant Temperature | Engine coolant temperature reads above the normal operating range; the ADEM III engine control logs the fault and the monitor raises a warning. | Low coolant level, plugged radiator core, a slipping or failed fan drive, or a faulty coolant temperature sensor. | Check coolant level and radiator core for restriction, verify fan operation, confirm the sensor reading with Cat ET before condemning the sensor. |
| Hydrostatic Charge Pressure Low | Monitor warns that hydrostatic (hystat) charge oil pressure has dropped below the acceptable minimum, as reported by the power train control. | Low hydraulic oil level, plugged charge filter, worn charge pump, or a faulty charge pressure sensor. | Check hydraulic oil level and charge filter condition first, verify charge pump output with a gauge, then check the sensor and wiring with Cat ET. |
| Pump Drive Oil Temperature High | Monitor warns that hydrostatic pump drive oil temperature has exceeded the normal operating range. | Low oil level, a blocked oil cooler core, a failing cooler fan, or a sustained high-load condition on the hydrostatic system. | Check oil level and cooler core for debris, confirm cooler fan operation, let the system cool before resuming work, verify the sensor with Cat ET if the warning persists after cooling. |
| Hydrostatic Drive System Warning (Power Train ECM) | Monitor lights the hydrostatic drive warning when the power train control (Power Train ECM / electronic hydrostatic control) reports a problem signal. | A logged fault in the power train ECM, a sensor or solenoid circuit issue in the hydrostatic control loop, or a data link problem to the power train ECM. | Enter service mode to read the specific code from the power train ECM on the numeric message display, or connect Cat ET, then troubleshoot the indicated circuit. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
963C attachments & work tools
Blades
Cat literature for the 963C track-type loader centers on GP and MP buckets; a dozer-blade attachment is documented for this track-loader class in general, but a formal S/SU/A blade-type breakdown and VPAT (power-angle-tilt) option are tied to the current next-generation 963/963K line, not confirmed under the 963C nameplate. Treat blade width/type as a dealer-quoted fitment rather than a standard catalog line item on the 963C — verify current availability with your dealer.
Rippers
Standard ripper-scarifier is a radial multi-pocket (3-shank) unit raised and lowered off its own hydraulic circuit, switched by a manual diverter valve that alternates the circuit between the ripper and the MP-bucket clamp function. Rated penetration runs about 295 mm (11.6 in) with a ripping width around 1836 mm (72.3 in) with all shanks fitted; shanks can be pulled from individual pockets to run single- or two-shank for harder or rocky material.
Winches
No factory cable winch or towing-winch package is documented for the 953C/963C track-loader family in period Cat literature; winch fitment is more typical of the D6-D8 class dozer range, not this loader-chassis family. Any winch seen on a used 963C is most likely a third-party or aftermarket fitment — confirm mounting and hydraulic tie-in with the dealer or a parts lookup for the specific unit.
Drawbars/counterweights
A rear drawbar/pintle hitch is offered as a factory option, mounted behind the final drives for towing duty. The engine and rear frame mass act as the working counterbalance for bucket loads; no separate bolt-on counterweight package is documented for the 963C beyond this integral balance.
Cab/ROPS guarding options for forestry/waste configs
The 963C was offered in a factory Waste Handler (WH) arrangement built around a cab guard/screen that shields the front glass from debris coming over the bucket, a screened engine hood with smaller-than-standard perforations, guarded lighting, and a heavy-duty hydraulic tank guard roughly twice standard thickness. The WH package also adds final-drive seal guards, idler guards with scrapers, rubber debris baffles, rear striker bars, and a trash-resistant radiator/cooler pack — the same guarding logic used for forestry/high-debris duty even though Cat marketed it under the waste/demolition name for this generation.
Hydraulic arrangement notes for front/rear tools
Main implement pump is a vane-type unit flowing about 215 L/min (56.8 gpm) against a 21 MPa (3045 psi) relief setting, giving roughly a 6.6-second raise and 1.3-second dump on the standard bucket linkage. Rear/auxiliary tool functions (ripper, MP-bucket clamp) share a secondary circuit selected by a manual diverter valve rather than running simultaneously, so ripper and clamp-bucket operation are mutually exclusive on one lever.
All 963C assemblies by section
Every catalogued assembly group for the Caterpillar 963C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
188-3415 Aftercooler Gp
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 5 |
| 13***67 | Grommet | 1 |
| 18***15 | Aftercooler Group | 1 |
176-9934 Air Cleaner Gp
| 12***37 | Precleaner As; -Air Cleaner-Air Inlet | 1 |
| 17***34 | Air Cleaner Group | 1 |
| 18***88 | Air Cleaner Group | 1 |
191-9899 Air Cleaner Gp -Waste Handling
| 11***59 | Damper | 1 |
| 13***80 | Precleaner As; (Air) | 1 |
| 15***77 | Kit-Screen; (Includes Prescreen, Damper, Tube, Clamp And Screws) | 1 |
189-5288 Air Cleaner Gp
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 18***88 | Air Cleaner Group | 1 |
| 4P***24 | Seal-O-Ring | 1 |
153-1794 Cover Gp-Air Inlet -Engine
| 15***94 | Cover Group-Air Inlet; -Engine | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 20***69 | Cover-Air Inlet | 1 |
189-8780 Cover Gp-Air Inlet -Starting Aid Heater
| 14***72 | Gasket | 1 |
| 18***79 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 18***80 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
294-7675 Cover Gp-Air Inlet
| 24***95 | Insulator; (Air Inlet Heater) | 1 |
| 29***75 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
189-8779 Cover Gp-Air Inlet -Starting Aid Heater
| 18***79 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 24***95 | Insulator; (Air Inlet Heater) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
288-0973 Cover Gp-Air Inlet
| 24***95 | Insulator; (Air Inlet Heater) | 1 |
| 28***73 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
170-3273 Elbow Gp-Air Inlet -Engine
| 13***26 | Stud; (M8x1.25x110-mm, M8x1.25x17-mm) | 4 |
| 17***73 | Elbow Group-Air Inlet; -Engine | 1 |
| 17***74 | Elbow | 1 |
246-3523 Elbow Gp-Air Inlet -Engine
| 13***26 | Stud; (M8x1.25x110-mm, M8x1.25x17-mm) | 4 |
| 14***95 | Plug As | 1 |
| 17***74 | Elbow | 1 |
176-9936 Lines Gp-Air
| 17***36 | Lines Group-Air | 1 |
| 17***37 | Hose | 1 |
| 18***89 | Hose | 1 |
188-3418 Lines Gp-Air -Ataac
| 10***52 | Hose | 1 |
| 18***18 | Lines Group-Air; -Ataac | 1 |
| 20***35 | Hose | 1 |
183-6845 Manifold Gp-Exhaust
| 17***98 | Bolt-Flange Head; (M10x1.5-Thd) | 8 |
| 18***45 | Manifold Group-Exhaust; -Dry | 1 |
| 18***54 | Manifold-Exhaust; (Center) | 1 |
231-5806 Mounting Gp-Muffler
| 22***42 | Bracket As | 1 |
| 23***06 | Mounting Group-Muffler | 1 |
| 7V***15 | Spacer; (11x26.7x12-mm Thk) | 8 |
254-5021 Muffler
| 20***21 | Muffler As | 1 |
| 20***22 | Bracket As | 1 |
| 21***05 | Pipe-Exhaust | 1 |
176-9943 Muffler Gp
| 17***43 | Muffler Group | 1 |
| 20***21 | Muffler As | 1 |
| 21***05 | Pipe-Exhaust | 1 |
191-9543 Precleaner Ar
| 13***80 | Precleaner As; (Air) | 1 |
| 17***15 | Clamp | 1 |
| 19***43 | Precleaner Ar | 1 |
124-3237 Precleaner Gp
| 12***37 | Precleaner As; -Air Cleaner-Air Inlet | 1 |
| 19***42 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
5q-9027 Precleaner Gp
| 5P***99 | Clamp; (Hose) | 1 |
| 5Q***27 | Precleaner Group | 1 |
| 6H***21 | Body-Pre-Cleaner | 1 |
186-0633 Turbocharger Gp
| 15***72 | Clamp As; (Compressor) | 1 |
| 18***33 | Turbocharger Group | 1 |
| 19***65 | Housing | 1 |
187-1603 Turbocharger Gp
| 15***72 | Clamp As; (Compressor) | 1 |
| 18***03 | Turbocharger Group | 1 |
| 19***65 | Housing | 1 |
190-3942 Turbocharger Gp
| 19***42 | Turbocharger Group | 1 |
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
Basic Engine
193-1030 Belt Gp-Serpentine -With Air Conditioner
| 19***30 | Belt Group-Serpentine; -With Air Conditioner | 1 |
| 22***36 | Belt-Serpentine; (With Air Conditioner) | 1 |
193-1031 Belt Gp-Serpentine -Without Air Conditioner
| 19***31 | Belt Group-Serpentine; -Without Air Conditioner | 1 |
| 22***38 | Belt-Serpentine; (Without Air Conditioner) | 1 |
189-2221 Belt Tightener Gp
| 18***21 | Belt Tightener Group | 1 |
| 19***43 | Belt Tensioner | 1 |
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 1 |
210-2610 Bracket Gp-Mounting
| 21***10 | Bracket Group-Mounting | 1 |
| 23***46 | Bracket As | 1 |
| 4P***81 | Clip (For Use With 7.9mm Wide Tie Wrap) | 4 |
216-7922 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 20***22 | Gear-Camshaft; (100-Teeth), Name-Plate (Swedish) | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
210-5598 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 15***14 | Tee As | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
153-1832 Cover Gp-Valve Mechanism
| 15***32 | Cover Group-Valve Mechanism | 1 |
| 16***61 | Cover As-Base | 1 |
| 23***01 | Cover As; (Top) | 1 |
113-6087 Crankshaft Gp
| 10***08 | Bearing-Main; (Standard) | 6 |
| 11***87 | Crankshaft Group | 1 |
| 14***62 | Bearing; (0.25mm Undersize) | 0 |
129-1165 Cylinder Block Gp
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 12***65 | Cylinder Block Group | 1 |
| 18***09 | Plug As; (High Temperature) | 1 |
221-4480 Cylinder Block Gp
| 22***80 | Cylinder Block Group | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 14 |
| 7E***68 | Cap-Crankshaft Bearing | 7 |
221-4481 Cylinder Block Gp
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
| 22***80 | Cylinder Block Group | 1 |
| 22***81 | Cylinder Block Group | 1 |
278-3490 Cylinder Head As
| 14***18 | Insert-Valve Seat; (Exhaust, Standard) | 6 |
| 15***25 | Setscrew; (3/8-16) | 6 |
| 18***82 | Insert-Valve Seat; (0.127-mm Os Od, Exhaust) | 0 |
227-5952 Cylinder Head As
| 13***15 | Seat-Valve Spring | 6 |
| 14***70 | Guide-Valve; (Standard, Inlet) | 12 |
| 14***14 | Seal-Valve Stem; (Inlet) | 12 |
205-1271 Cylinder Head As
| 14***18 | Insert-Valve Seat; (Exhaust, Standard) | 6 |
| 15***25 | Setscrew; (3/8-16) | 6 |
| 15***04 | Insert-Valve Seat; (Standard, Inlet) | 12 |
227-5951 Cylinder Head As
| 14***18 | Insert-Valve Seat; (Exhaust, Standard) | 6 |
| 15***25 | Setscrew; (3/8-16) | 6 |
| 21***13 | Insert-Valve Seat; (Standard, Inlet) | 12 |
205-1272 Cylinder Head As
| 10***29 | Seal-Valve Stem | 6 |
| 13***15 | Seat-Valve Spring | 6 |
| 14***70 | Guide-Valve; (Standard, Inlet) | 12 |
205-1274 Cylinder Head Gp
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 20***73 | Cylinder Head Group | 1 |
| 20***74 | Cylinder Head Group | 1 |
227-5953 Cylinder Head Gp
| 13***83 | Retainer-Spring | 6 |
| 13***15 | Seat-Valve Spring | 6 |
| 13***18 | Spring-Valve; (Exhaust) | 6 |
227-5954 Cylinder Head Gp
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 22***53 | Cylinder Head Group | 1 |
| 22***54 | Cylinder Head Group | 1 |
133-3742 Cylinder Head Gp
| 13***42 | Cylinder Head Group | 1 |
| 13***95 | Gasket-Cylinder Head | 1 |
| 13***52 | Bolt-12 Point Head; (M20x2.5x170mm) | 14 |
205-1273 Cylinder Head Gp
| 10***29 | Seal-Valve Stem | 6 |
| 13***83 | Retainer-Spring | 6 |
| 13***15 | Seat-Valve Spring | 6 |
205-1275 Cylinder Head Gp
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 20***73 | Cylinder Head Group | 1 |
| 20***75 | Cylinder Head Group | 1 |
189-2227 Damper & Pulley Gp
| 16***21 | Damper Assem. | 1 |
| 18***27 | Damper & Pulley Group | 1 |
| 18***33 | Pulley-Crankshaft | 1 |
219-6339 Drain Gp-Engine Oil -Extension
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 21***39 | Drain Group-Engine Oil; -Extension | 1 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 1 |
7c-4532 Drain Gp-Engine Oil -Shutoff Valve
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
| 7C***32 | Drain Group-Oil Pan; Oil Pan Drain Group | 1 |
7c-4566 Drain Gp-Engine Oil -Magnetic Plug
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 7C***66 | Drain Group-Oil Pan; -Magnetic Plug | 1 |
189-2223 Drive Gp-Fan -Belt
| 09***35 | Spacer; (11x22x5-mm Thk) | 1 |
| 18***03 | Drive Group-Fan | 1 |
| 18***23 | Drive Group-Fan; -Belt | 1 |
189-2203 Drive Gp-Fan
| 12***71 | Cone | 2 |
| 12***72 | Cup | 2 |
| 18***03 | Drive Group-Fan | 1 |
116-4556 Fastener Gp-Front Housing
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***36 | Bolt; (M12x1.75x70-mm) | 6 |
193-1592 Flywheel Gp
| 18***95 | Flywheel As | 1 |
| 19***92 | Flywheel Group | 1 |
| 3E***13 | Pin-Spring | 1 |
205-1321 Gear Gp-Front
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
| 11***19 | Plate-Retaining | 1 |
4w-1103 Housing Gp-Flywheel
| 10***51 | Housing-Flywheel | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 2P***94 | Plug-Sealing | 1 |
133-5055 Housing Gp-Front
| 12***83 | Housing-Front | 1 |
| 13***55 | Housing Group-Front | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
139-4081 Lifter Gp-Valve
| 13***81 | Lifter Group-Valve; -Mechanism | 1 |
| 13***84 | Spacer; (15.9x24x6-mm Thk) | 2 |
| 13***76 | Shaft As-Lifter | 1 |
159-2565 Lifting Gp-Engine
| 15***65 | Lifting Group-Engine | 1 |
| 20***38 | Lifting Assem. | 1 |
| 23***69 | Plate-Lifting | 1 |
246-3551 Lifting Gp-Engine
| 23***69 | Plate-Lifting | 1 |
| 24***51 | Lifting Group-Engine | 1 |
| 6V***20 | Bolt; (M10x1.5x30-mm) | 4 |
191-0425 Mounting Gp-Engine & Xmsn
| 11***10 | Support As | 1 |
| 13***28 | Spacer | 2 |
| 19***20 | Support As | 1 |
189-2222 Mounting Gp-Fan Drive
| 18***94 | Bracket As | 1 |
| 18***22 | Mounting Group-Fan Drive | 1 |
| 22***15 | Stud; (M10x1.5x30-mm) | 2 |
246-3550 Mounting Gp-Fan Drive
| 22***15 | Stud; (M10x1.5x30-mm) | 2 |
| 24***32 | Bracket | 1 |
| 24***50 | Mounting Group-Fan Drive | 1 |
196-0077 Pan Gp-Oil -Engine
| 15***71 | Pan-Oil | 1 |
| 16***05 | Seal-Integral | 1 |
| 19***77 | Work Lamp; Cab, Upper, Work Lamp; Cab, Rear, Work Lamp, Pan Group-Oil; -Engine, Work Lamp; Rear, Work Lamp; Cab, Lower | 1 |
177-7500 Piston & Rod Gp
| 16***24 | Pin-Piston | 1 |
| 17***43 | Jet As-Piston Cooling | 1 |
| 17***00 | Piston & Rod Group | 1 |
159-0303 Plug Gp-Cylinder Block
| 14***09 | Plug As-Sto | 2 |
| 15***03 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
162-8068 Plug Gp-Engine
| 14***95 | Plug As | 1 |
| 16***68 | Plug Group-Engine; -Oil Gallery | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
123-8395 Pulley As-Idler
| 12***95 | Pulley As-Idler | 1 |
| 12***90 | Bolt; (M10x1.5) | 1 |
| 12***91 | Cover-Dust | 1 |
189-2196 Pulley Gp-Fan & Alt Drive
| 12***58 | Pulley-Alternator; (8-Groove) | 1 |
| 18***96 | Pulley Group-Fan & Alt Drive | 1 |
| 18***10 | Pulley-Fan | 1 |
246-3549 Pulley Gp-Idler
| 14***01 | Cover-Dust; (Rear) | 1 |
| 15***98 | Spacer; (10.4x38.1x20-mm Thk) | 1 |
| 15***00 | Bolt; (M10x1.5x54.25-mm) | 1 |
189-2220 Pulley Gp-Idler
| 14***01 | Cover-Dust; (Rear) | 1 |
| 15***98 | Spacer; (10.4x38.1x20-mm Thk) | 1 |
| 15***00 | Bolt; (M10x1.5x54.25-mm) | 1 |
256-3831 Rocker Arm Gp -Exhaust
| 25***31 | Rocker Arm Group; -Exhaust | 1 |
| 25***32 | Rocker Arm As; (Exhaust) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
256-3834 Rocker Arm Gp -Inlet
| 25***34 | Rocker Arm Group; -Inlet | 1 |
| 25***35 | Rocker Arm As; (Inlet) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
115-4203 Seal Gp-Crankshaft
| 11***03 | Seal Group-Crankshaft | 1 |
| 22***09 | Seal Group-Crankshaft; (Rear) | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
177-0010 Support Gp-Engine
| 17***10 | Support Group-Engine | 1 |
| 17***11 | Support | 2 |
| 5P***46 | Washer-Hard; (15.5x29x3-mm Thk) | 8 |
235-5528 Valve Mechanism Gp
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
135-2969 Valve Mechanism Gp
| 13***69 | Valve Mechanism Group | 1 |
| 13***81 | Lifter Group-Valve; -Mechanism | 3 |
| 21***09 | Bridge-Valve | 6 |
256-3830 Valve Mechanism Gp
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
Cooling System
117-3643 Cooler Gp-Engine Oil
| 11***43 | Cooler Group-Engine Oil | 1 |
| 23***55 | Gasket | 1 |
| 26***43 | Core As-Engine Oil Cooler | 1 |
262-7913 Fan Gp-Blower
| 25***96 | Spider As-Fan; (11-Blade) | 1 |
| 25***61 | Guard As; (Top) | 1 |
| 25***62 | Guard As; (Bottom) | 1 |
176-9963 Fan Gp-Blower
| 09***49 | Bolt; (M8x1.25x40-mm) | 6 |
| 11***00 | Spider As-Fan; (8-Blade) | 1 |
| 17***63 | Fan Group-Blower | 1 |
246-3546 Lines Gp-Water
| 12***66 | Gasket | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 13***12 | Gasket-Water Regulator; (Temperature Regulator Housing) | 1 |
159-1814 Lines Gp-Water
| 01***24 | Bushing To Supply Port | 1 |
| 12***66 | Gasket | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
188-3424 Mounting Gp-Radiator
| 15***70 | Washer; (16.5x65x3-mm Thk) | 6 |
| 17***11 | Locknut; (M16x2-Thd) | 2 |
| 18***24 | Mounting Group-Radiator | 1 |
193-9237 Pump Gp-Water
| 14***95 | Plug As | 2 |
| 14***09 | Plug As-Sto | 2 |
| 16***19 | Plug As | 1 |
193-9238 Pump Gp-Water
| 11***37 | Pulley; (8-Groove) | 1 |
| 11***25 | Filter; (Water)(Pump) | 1 |
| 12***70 | Shaft Assem. | 1 |
236-4413 Pump Gp-Water
| 11***37 | Pulley; (8-Groove) | 1 |
| 11***25 | Filter; (Water)(Pump) | 1 |
| 12***70 | Shaft Assem. | 1 |
188-3421 Radiator Gp
| 11***60 | Cap-Radiator | 1 |
| 18***21 | Radiator Group | 1 |
| 19***53 | Hose-Radiator; (Upper) | 1 |
191-9900 Radiator Gp
| 19***00 | Radiator Group | 1 |
| 23***54 | Core As-Radiator | 1 |
Electrical And Starting System
3e-6328 Alarm Gp -Action
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***42 | Stator Assem. | 1 |
208-6940 Alternator Gp-Charging
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 03***97 | Boot | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
185-5294 Alternator Gp-Charging
| 18***94 | Alternator Group-Charging; -Waste Handling | 2 |
| 19***01 | Bracket As-Alternator | 1 |
| 20***41 | Strap As | 1 |
262-4287 Battery & Wiring Gp
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 03***97 | Boot | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
175-7265 Battery & Wiring Gp
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 03***97 | Boot | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
8r-8714 Battery Gp -Maintenance Free
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 20***01 | Control Group-Engine Electronic | 1 |
| 5P***47 | Bolt; (M8x1.25x70-mm) | 3 |
233-4825 Control & Mtg Gp-Engine Elek
| 23***25 | Control & Mtg Group-Engine Elek | 1 |
| 25***97 | Film-Identification; (Solenoid Valve)(Solenoid, Bucket Positioner) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
242-7205 Control Gp-Communication -Product Link 201
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 24***05 | Control Group-Communication; -Product Link 201 | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
209-6417 Control Gp-Communication -Product Link 201
| 16***14 | Control Group-Unprogrammed; -Product Link 201 | 1 |
| 20***17 | Control Group-Communication; -Product Link 201 | 1 |
| 23***40 | Film; (Warning) (Product Link, Ansi) (On Lh Front Post Inside Cab) | 1 |
8c-9759 Control Gp-Bucket Positioner
| 16***14 | Control Group-Unprogrammed; -Product Link 201 | 1 |
| 23***87 | Software Group-Communication; (Product Link 151) | 1 |
| 8C***59 | Control Group-Electronic; (Bucket Positioner) | 1 |
206-2700 Control Gp-Engine Electronic
| 20***00 | Control Group-Engine Electronic | 2 |
322-3602 Control Gp-Engine Electronic
| 25***97 | Film-Identification; (Solenoid Valve)(Solenoid, Bucket Positioner) | 1 |
| 32***02 | Control Group-Engine Electronic | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
206-2701 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 20***01 | Control Group-Engine Electronic | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
348-2377 Control Gp-Engine Electronic
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 34***77 | Control Group-Engine Electronic | 1 |
8c-9763 Control Gp-Lift Kickout
| 17***39 | Screw; (8-32x0.5-In) | 4 |
| 3B***01 | Lockwasher (Part Of 3f***99 Switch) | 1 |
| 4D***14 | Plug .0625 In. (1.59 mm) Dia. | 1 |
168-7314 Control Gp-Unprogrammed -Product Link 201
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 16***14 | Control Group-Unprogrammed; -Product Link 201 | 1 |
156-6155 Control Gp-Unprogrammed
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***55 | Control Group-Unprogrammed; -Machine Security System | 1 |
172-9389 Control Gp-Unprogrammed -Power Train
| 17***89 | Control Group-Unprogrammed; -Steering, Transmission | 1 |
| 19***57 | Electronics Group-Monitor | 1 |
| 19***88 | Electronics Group-Power Train | 1 |
239-9954 Control Gp-Unprogrammed -Product Link 300
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 23***54 | Control Group-Unprogrammed; (Product Link 300)(Product Link 321sr) | 1 |
175-7281 Electronics Ar-Machine
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 17***81 | Electronics Ar-Machine | 1 |
262-2043 Electronics Gp-Communication -Product Link 300
| 15***55 | Control Group-Unprogrammed; -Machine Security System | 1 |
| 20***62 | Key As-Electronic; (Security) | 2 |
| 20***65 | Key As-Electronic; (Security)(Blank) | 2 |
262-1421 Electronics Gp-Communication -Product Link 300
| 20***62 | Electronics Group-Machine | 1 |
| 24***64 | Software Group-Machine; (Security) | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
199-5995 Electronics Gp-Machine -Security
| 19***95 | Electronics Group-Machine; -Security | 1 |
| 25***34 | Software Group-Monitor; (Caterpillar Monitoring System) | 1 |
| 25***35 | Service Group-Monitor | 1 |
207-5262 Electronics Gp-Machine -Security
| 20***62 | Electronics Group-Machine | 1 |
| 27***46 | Software Group-Power Train | 1 |
| 27***47 | Service Group-Power Train | 1 |
194-3257 Electronics Gp-Monitor
| 19***57 | Electronics Group-Monitor | 1 |
| 4P***81 | Clip (For Use With 7.9mm Wide Tie Wrap) | 2 |
| 4P***34 | Clip-Ladder; (00800 mm ) | 2 |
194-3688 Electronics Gp-Power Train
| 12***87 | Element As-Jacket Water Heater; (240-Volt, 1000-Watt) | 1 |
| 13***48 | Kit-Seal; (Jacket Water Heater) | 1 |
| 13***17 | Cap As-Dust | 1 |
198-9202 Fastener Gp-Engine Wiring
| 19***02 | Fastener Group-Engine Wiring | 1 |
| 24***27 | Element As-Jacket Water Heater; (240-Volt, 1000-Watt) | 1 |
| 24***30 | Cord As-Heater | 1 |
9x-3294 Heater Gp-Jacket Water
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***98 | Plate | 2 |
| 17***72 | Harness As-Control; (Product Link) | 1 |
3t-8724 Heater Gp-Jacket Water
| 12***86 | Element As-Jacket Water Heater; (120-Volt, 1000-Watt) | 1 |
| 13***48 | Kit-Seal; (Jacket Water Heater) | 1 |
| 3T***24 | Heater Group-Jacket Water | 1 |
187-7683 Installation Ar-Communication -Product Link
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***74 | Cover-Connector; (Wire Router) | 1 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
260-0613 Installation Gp-Communication -Product Link 321sr
| 12***78 | Locknut; (M6x1-Thd) | 8 |
| 23***40 | Film; (Warning) (Product Link, Ansi) (On Lh Front Post Inside Cab) | 1 |
| 23***41 | Film-Warning; (Product Link Radio, Intl) | 1 |
273-5725 Installation Gp-Communication -Product Link 300
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***55 | Lamp As; (24-Volt)(Security System) | 1 |
273-5723 Installation Gp-Communication -Product Link 321sr
| 10***25 | Clip | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
183-7012 Installation Gp-Security
| 15***50 | Wire As | 1 |
| 18***12 | Installation Group-Security | 1 |
230-5825 Installation Gp-Security
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
| 10***53 | Lens As; (Floodlight) | 1 |
156-7106 Kit-Injector Wiring Harness
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
219-6488 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
| 17***58 | Lens As | 1 |
133-6336 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***36 | Lamp Group-Flood; (24-Volt) | 1 |
| 15***52 | Bezel | 1 |
106-8964 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***64 | Lamp Group-Flood; -Suspended Mount | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
174-9556 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
| 16***56 | Bracket; (Lamp Retaining) | 1 |
171-2065 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***65 | Lamp Group-Flood; -Rear-Engine Work Light | 1 |
| 17***91 | Bracket Assem. | 1 |
242-3517 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
272-6641 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***64 | Bracket As (Each Includes) | 2 |
| 13***36 | Lamp Group-Flood; (24-Volt) | 2 |
164-5499 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
| 16***99 | Lamp Group-Flood | 1 |
242-3518 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
| 19***15 | Tube-Flash; (8 Prong Connection)(Warning Beacon) | 1 |
110-7563 Lamp Gp-Warning Beacon
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 11***64 | Bracket As (Each Includes) | 2 |
184-5251 Lighting Gp-Flood -Front, Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***64 | Bracket As (Each Includes) | 2 |
| 12***51 | Guard; (Front, Lh)(Lh) | 1 |
241-3989 Lighting Gp-Flood -Rear Bumper
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 14***01 | Grommet | 1 |
| 21***61 | Bracket As | 1 |
5q-9198 Lighting Gp-Flood -Rear Bumper
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***64 | Bracket As (Each Includes) | 2 |
| 12***51 | Guard; (Front, Lh)(Lh) | 1 |
274-9060 Lighting Gp-Warning Beacon
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
183-7013 Lighting Gp-Warning Beacon
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***30 | Strap As | 1 |
183-6482 Panel Gp-Circuit Breaker
| 03***16 | Elbow; (Pipe) | 1 |
| 16***23 | Plug As | 1 |
| 16***61 | Plug As | 1 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 33***45 | Radio Group-Communication; -Product Link 121sr | 1 |
199-7734 Sensor Gp-Engine
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 19***34 | Sensor Group-Engine | 1 |
239-9957 Sensor Gp-Liquid Level
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***44 | Sensor As-Pressure; (Transmission Clutch Latching) | 1 |
| 23***57 | Sensor Group-Liquid Level; -Coolant Loss | 1 |
214-4863 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 21***63 | Sensor Group-Position; -Rotary-Tc Impeller Clutch, Lh Pedal | 1 |
224-4536 Sensor Gp-Pressure
| 19***23 | Sensor Group-Pressure; -Turbocharger Outlet | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
194-6725 Sensor Gp-Pressure
| 19***25 | Sensor Group-Pressure; -Engine Oil | 2 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
178-3082 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
| 17***82 | Sensor Group-Pressure; -Transmission Clutch Latching | 1 |
239-2396 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 17***49 | Strap; (Marker) | 1 |
247-0302 Sensor Gp-Pressure
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 24***02 | Sensor Group-Pressure; -Turbocharger Outlet | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
236-6220 Sensor Gp-Pressure
| 23***20 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 6J***45 | Seal (.674" Inside Diameter) | 1 |
194-6723 Sensor Gp-Pressure
| 19***23 | Sensor Group-Pressure; -Turbocharger Outlet | 1 |
| 21***67 | Seal-O-Ring | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
134-0420 Sensor Gp-Pressure
| 13***20 | Sensor Group-Pressure; -Powershift | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
183-4584 Sensor Gp-Speed
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***84 | Sensor Group-Speed | 1 |
| 3E***71 | Wedge; (Receptacle Lock) (3 Pin) | 1 |
236-6221 Sensor Gp-Speed -Engine Timing
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 23***21 | Sensor Group-Speed; -Engine Timing | 1 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
189-5746 Sensor Gp-Speed
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 15***61 | Wedge-Plug Lock; (2-Pin) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
197-8392 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 19***92 | Sensor Group-Temperature; -Coolant, Water | 1 |
| 23***80 | Seal-O-Ring | 1 |
274-7395 Sensor Gp-Temperature
| 10***59 | Starting Motor Group-Electric; Electric Starting Motor Group (Delco Remy) | 1 |
| 27***95 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
204-0320 Sensor Gp-Temperature
| 15***37 | Heater As-Air Inlet; (22-Volt, 1892-Watt)(Starting Aid) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 20***20 | Sensor Group-Temperature; -Engine Oil | 1 |
191-6587 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 19***87 | Sensor Group-Temperature; -High Pressure Oil | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
134-2252 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***52 | Sensor Group-Temperature; -Transmission Oil-Xmsn, Torque Converter | 1 |
| 6V***09 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
197-8391 Sensor Gp-Temperature
| 19***87 | Sensor Group-Temperature; -High Pressure Oil | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
274-7396 Sensor Gp-Temperature
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
118-7284 Starting Aid Gp -Air Inlet
| 11***84 | Starting Aid Group; -Air Inlet Heater | 1 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
111-4275 Starting Motor Gp-Electric
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***75 | Starting Motor Group-Electric; (Cold Weather) | 1 |
207-1517 Starting Motor Gp-Electric
| 15***61 | Wedge-Plug Lock; (2-Pin) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
106-8559 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
106-8558 Starting Motor Gp-Electric
| 10***58 | Starting Motor Group-Electric | 2 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 20***77 | Bolt-Flange Head; (M8x1x25-mm) | 2 |
241-8368 Switch Gp-Magnetic -Main Relay
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***86 | Wiper Switch Assembly; (24-Volt)(Front/Intermittent) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
125-1302 Switch Gp-Magnetic -Start Relay
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
167-0138 Switch Gp-Magnetic -Main Relay
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 2H***22 | Lockwasher | 1 |
223-7577 Switch Gp-Magnetic -Air Inlet Heater Relay
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 22***77 | Switch Group-Magnetic; -Air Inlet Heater Relay | 1 |
158-6632 Switch Gp-Push Button -Horn
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***32 | Switch Group-Push Button; -Horn-Fuel Priming Pump | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
165-5970 Switch Gp-Toggle -Fuel Priming Pump
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
| 27***41 | Switch Group-Wiper; -Intermittent-Front, Rear | 1 |
275-7764 Switch Gp-Wiper
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
3e-0155 Switch Gp-Wiper -Intermittent, Front
| 3E***55 | Switch Group-Wiper; -Intermittent-Front, Rear | 1 |
| 9X***84 | Seal Kit; (Includes Seal, Ring, Spacer And Nut) | 1 |
275-7741 Switch Gp-Wiper
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
122-5053 Valve Gp-Solenoid
| 06***51 | Clamp | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
180-8522 Wiring Gp-Cab
| 06***51 | Clamp | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
176-3369 Wiring Gp-Engine
| 06***51 | Clamp | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
228-5786 Wiring Gp-Engine
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 13***43 | Boot; (Red)(Red) | 1 |
| 22***77 | Switch Group-Magnetic; -Air Inlet Heater Relay | 1 |
262-0840 Wiring Gp-Engine
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 13***43 | Boot; (Red)(Red) | 1 |
| 22***77 | Switch Group-Magnetic; -Air Inlet Heater Relay | 1 |
230-2531 Wiring Gp-Heater -Air Inlet Heater
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
207-4109 Wiring Gp-Platform
| 11***71 | Driver | 1 |
| 20***09 | Wiring Group-Platform | 1 |
| 4B***44 | Rivet | 5 |
Engine Arrangement
169-9096 Engine Ar-Complete
| 11***75 | Starting Motor Group-Electric; (Cold Weather) | 1 |
| 11***84 | Starting Aid Group; -Air Inlet Heater | 1 |
| 12***71 | Breather Group; -Engine | 1 |
290-1440 Engine Ar-Complete
| 11***75 | Starting Motor Group-Electric; (Cold Weather) | 1 |
| 12***71 | Breather Group; -Engine | 1 |
| 15***32 | Cover Group-Valve Mechanism | 1 |
173-7149 Engine Ar-Core
| 11***87 | Crankshaft Group | 1 |
| 11***03 | Seal Group-Crankshaft | 1 |
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
169-9099 Installation Ar-Engine
| 16***99 | Installation Ar-Engine | 1 |
| 17***34 | Air Cleaner Group | 1 |
| 17***36 | Lines Group-Air | 1 |
Frame And Body
219-1617 Bar Gp-Striker
| 13***31 | Film-Stripe; (Caterpillar)(Front) | 1 |
| 16***38 | Shim; (2-mm Thk) | 8 |
| 17***22 | Latch As; (Yellow) | 2 |
223-8035 Bumper Gp -Rear, Heavy Duty
| 11***31 | Bolt-Hex Head; (M24x3x120mm) | 8 |
| 21***98 | Plate As; (Lh) | 1 |
| 21***99 | Block; (Lh) | 1 |
230-8760 Bumper Gp -Rear
| 11***31 | Bolt-Hex Head; (M24x3x120mm) | 8 |
| 21***98 | Plate As; (Lh) | 1 |
| 21***99 | Block; (Lh) | 1 |
152-8863 Bumper Gp -Rear
| 15***63 | Bumper Group; -Rear | 1 |
| 22***35 | Bumper Group; -Rear, Heavy Duty | 1 |
224-8460 Counterweight Gp
| 14***98 | Lift & Latch As | 1 |
| 22***60 | Counterweight Group | 1 |
| 23***40 | Door As | 1 |
224-8461 Counterweight Gp
| 13***54 | Spacer; (10.5x19x26.5-mm Thk) | 1 |
| 13***44 | Rod | 1 |
| 17***70 | Latch As; (See Npr For Required Pawl) | 1 |
217-2492 Counterweight Gp
| 20***46 | Deflector As; (Rh) | 1 |
| 20***47 | Deflector As; (Lh) | 1 |
| 21***92 | Counterweight Group | 1 |
173-1952 Deflector Gp
| 13***54 | Spacer; (10.5x19x26.5-mm Thk) | 1 |
| 13***44 | Rod | 1 |
| 17***52 | Deflector Group | 1 |
232-0466 Door Gp-Access -Rear, Rh
| 13***54 | Spacer; (10.5x19x26.5-mm Thk) | 1 |
| 13***44 | Rod | 1 |
| 19***17 | Liner; (Lh) | 1 |
232-0468 Door Gp-Access -Front, Lh
| 23***68 | Door Group-Access; -Front, Lh | 1 |
| 23***31 | Hose, Hinge | 1 |
| 24***22 | Plate | 1 |
232-0465 Door Gp-Access -Rear, Lh
| 13***54 | Spacer; (10.5x19x26.5-mm Thk) | 1 |
| 13***44 | Rod | 1 |
| 17***70 | Latch As; (See Npr For Required Pawl) | 1 |
237-4146 Door Gp-Access -Front, Lh
| 11***75 | Plate | 2 |
| 13***54 | Spacer; (10.5x19x26.5-mm Thk) | 2 |
| 13***15 | Spacer; (11-mm Id)(25x55mm Thk) | 2 |
230-8741 Door Gp-Access -Cab Filter
| 13***54 | Spacer; (10.5x19x26.5-mm Thk) | 1 |
| 13***44 | Rod | 1 |
| 17***70 | Latch As; (See Npr For Required Pawl) | 1 |
237-4142 Door Gp-Access -Front, Rh
| 11***75 | Plate | 2 |
| 11***16 | Boss; (M12x1.75x20-mm) | 2 |
| 13***54 | Spacer; (10.5x19x26.5-mm Thk) | 2 |
232-0467 Door Gp-Access -Front, Rh
| 23***67 | Door Group-Access; -Front, Rh | 1 |
| 23***31 | Hose, Hinge | 1 |
| 24***22 | Plate | 1 |
223-8020 Enclosure Gp-Engine -Heavy Duty-Waste Handling-Systemone
| 22***12 | Frame As | 1 |
| 22***20 | Enclosure Group-Engine; -Heavy Duty-Waste Handling-Systemone | 1 |
| 4F***82 | Plug-Core | 8 |
175-7267 Enclosure Gp-Engine
| 11***75 | Plate | 2 |
| 13***54 | Spacer; (10.5x19x26.5-mm Thk) | 4 |
| 13***15 | Spacer; (11-mm Id)(25x55mm Thk) | 2 |
175-7268 Frame Gp-Loader
| 13***59 | Support As | 1 |
| 16***65 | Screw-Flat Head | 1 |
| 17***62 | Plate As | 1 |
191-9903 Frame Gp-Loader -Waste Handling
| 18***25 | Guard As-Engine | 1 |
| 19***03 | Frame Group-Loader; -Waste Handling | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 4 |
223-8048 Guard Gp-Bottom -Waste Handling
| 22***22 | Enclosure Group-Engine | 1 |
| 22***48 | Guard Group-Bottom; -Waste Handling | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 4 |
127-5659 Guard Gp-Bottom
| 12***59 | Guard Group-Bottom | 1 |
| 17***52 | Deflector Group | 1 |
| 22***21 | Guard Group-Engine; -Waste Handling | 1 |
191-9901 Guard Gp-Engine -Waste Handling
| 19***01 | Guard Group-Engine; -Waste Handling | 1 |
| 20***85 | Guard Group-Front | 1 |
223-8021 Guard Gp-Engine -Waste Handling
| 20***86 | Cover As; (Lh) | 1 |
| 20***87 | Cover As; (Rh) | 1 |
| 20***88 | Cover As; (Lh) | 1 |
176-6396 Guard Gp-Engine
| 17***82 | Guard As; (Lower, Rh) | 1 |
| 17***83 | Guard As; (Lower, Lh) | 1 |
| 17***96 | Guard Group-Engine | 1 |
213-6643 Guard Gp-Final Drive
| 17***65 | Guard As | 1 |
| 17***67 | Guard As | 1 |
| 17***69 | Guard As | 1 |
176-7481 Guard Gp-Front
| 17***81 | Guard Group-Front | 1 |
| 22***21 | Guard As; (Rh) | 1 |
| 22***23 | Guard As; (Lh) | 1 |
201-0185 Guard Gp-Front
| 20***85 | Guard Group-Front | 1 |
| 3W***72 | Guard As | 2 |
| 3W***75 | Guard As | 2 |
223-8019 Guard Gp-Front -Heavy Duty-Waste Handling
| 22***19 | Guard Group-Front; -Heavy Duty-Waste Handling | 1 |
| 3W***72 | Guard As | 2 |
| 3W***75 | Guard As | 2 |
225-6620 Guard Gp-Front
| 22***20 | Guard Group-Front | 1 |
| 25***04 | Guard As | 2 |
| 25***05 | Guard As | 2 |
265-4924 Guard Gp-Idler -Systemone
| 12***51 | Guard; (Front, Lh)(Lh) | 1 |
| 12***54 | Guard; (Front, Rh)(Rh) | 1 |
| 13***69 | Guard As-Front-Rh | 1 |
3w-8578 Guard Gp-Idler -Enhanced Extended Wear Life
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 16 |
| 20***20 | Cover As; (Rh) | 1 |
| 20***21 | Cover As; (Lh) | 1 |
253-3702 Guard Gp-Idler -Systemone
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***64 | Bracket As (Each Includes) | 2 |
| 13***69 | Guard As-Front-Rh | 1 |
208-1122 Guard Gp-Lift Cylinder
| 12***51 | Guard; (Front, Lh)(Lh) | 1 |
| 12***54 | Guard; (Front, Rh)(Rh) | 1 |
| 13***69 | Guard As-Front-Rh | 1 |
226-0574 Guard Gp-Lighting
| 17***66 | Angle | 2 |
| 17***68 | Bracket As; (Lh) | 2 |
| 19***95 | Plate As | 1 |
195-1069 Guard Gp-Lighting
| 15***20 | Washer; (17x56x5-mm Thk) | 2 |
| 19***69 | Guard Group-Lighting | 1 |
| 20***07 | Bracket; (Lh) | 1 |
190-6015 Guard Gp-Lines -Lift
| 17***66 | Angle | 2 |
| 17***68 | Bracket As; (Lh) | 2 |
| 19***15 | Guard Group-Lines; -Lift | 1 |
8y-9493 Guard Gp-Lines
| 17***66 | Angle | 2 |
| 17***68 | Bracket As; (Lh) | 2 |
| 19***95 | Plate As | 1 |
203-1898 Guard Gp-Radiator
| 17***66 | Angle | 2 |
| 17***68 | Bracket As; (Lh) | 2 |
| 19***95 | Plate As | 1 |
223-8017 Guard Gp-Radiator -Waste Handling
| 22***10 | Seal; (73-cm) | 0 |
| 22***17 | Guard Group-Radiator; -Waste Handling | 1 |
133-5509 Hitch Gp
| 13***09 | Hitch Group | 1 |
| 21***23 | Baffle As | 1 |
| 21***88 | Baffle As | 1 |
188-9229 Plug Gp-Bumper
| 15***81 | Seal; (2.5m) | 0 |
| 18***29 | Plug Group-Bumper | 1 |
| 22***24 | Screen | 1 |
223-8047 Seal Gp-Chassis
| 13***32 | Post-Lh | 1 |
| 13***33 | Post-Rh | 1 |
| 22***47 | Seal Group-Chassis | 1 |
223-8043 Seal Gp-Front
| 22***43 | Seal Group-Front | 1 |
| 2J***74 | Seal-O-Ring; 9.12mm(.36in) Id | 1 |
| 2J***26 | Seal-Lip Type | 1 |
223-8042 Seal Gp-Hood
| 22***42 | Seal Group-Hood | 1 |
| 2J***74 | Seal-O-Ring; 9.12mm(.36in) Id | 1 |
| 2J***26 | Seal-Lip Type | 1 |
129-5339 Support Gp-Platform
| 0S***22 | Washer 6.35 mm (.25 In.) Thick | 1 |
| 12***39 | Support Group-Platform | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
Fuel System
241-2426 Filter Gp-Water Sep & Fuel
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 14***61 | Elbow Group | 1 |
208-6942 Filter Gp-Water Sep & Fuel
| 16***54 | Pump Group-Fuel Priming; -Manual | 1 |
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 20***71 | Base As | 1 |
208-8369 Filter Gp-Water Sep & Fuel
| 03***80 | Spacer; (9x16x36-mm) | 1 |
| 14***72 | Elbow Group | 1 |
| 20***69 | Filter Group-Water Sep & Fuel | 2 |
174-9570 Filter Gp-Water Sep & Fuel
| 00***73 | Elbow, Each Including: | 1 |
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 20***69 | Filter Group-Water Sep & Fuel | 1 |
175-7266 Lines Gp-Fuel
| 14***75 | Valve-Drain; (Fuel) | 1 |
| 17***99 | Base As-Fuel Filter | 1 |
| 17***66 | Lines Group-Fuel | 1 |
215-9260 Lines Gp-Fuel Filter
| 08***56 | 90 Degrees Elbow | 2 |
| 11***64 | Clip-Loop | 1 |
| 14***75 | Valve-Drain; (Fuel) | 1 |
215-3386 Lines Gp-Fuel Filter
| 14***75 | Valve-Drain; (Fuel) | 1 |
| 14***18 | Connector As | 1 |
| 17***99 | Base As-Fuel Filter | 1 |
205-4161 Pump & Mtg Gp-Unit Inj Hyd
| 18***41 | Pump Group-Unit Injector Hydraulic | 1 |
| 18***99 | Connector As | 1 |
| 20***61 | Pump & Mtg Group-Unit Inj Hydraulic | 1 |
184-5248 Pump Gp-Fuel Priming -Electric
| 00***73 | Elbow, Each Including: | 1 |
| 13***06 | Film-Identification; (Fuel) | 1 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
165-9154 Pump Gp-Fuel Priming -Manual
| 06***39 | Seal-O-Ring | 1 |
| 16***54 | Pump Group-Fuel Priming; -Manual | 1 |
| 18***23 | Pump As-Fuel Priming | 1 |
183-2824 Pump Gp-Fuel Priming -Manual
| 17***97 | Pump Group-Fuel Prm & Water Sep | 1 |
| 18***24 | Pump Group-Fuel Priming; -Manual | 1 |
| 24***27 | Separator Group-Water | 1 |
212-3657 Pump Gp-Fuel Prm & Water Sep -Electric
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 13***15 | Ring-Backup; (40mm Od) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 1 |
176-9997 Pump Gp-Fuel Prm & Water Sep
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 17***97 | Pump Group-Fuel Prm & Water Sep | 1 |
| 21***39 | Filter Base Assembly; (24-Volt) | 1 |
178-6342 Pump Gp-Unit Injection
| 15***88 | Deflector | 1 |
| 17***42 | Pump Group-Unit Injection; -Fuel | 2 |
| 19***03 | Bolt-Shoulder; (M6x1.0x60mm) | 1 |
178-6343 Pump Gp-Unit Injection
| 11***75 | Washer; (13.5x32x8-mm Thk) | 1 |
| 12***53 | Valve Group-Solenoid | 1 |
| 12***73 | Gear-Pump Drive; (36 Teeth) | 1 |
180-7341 Pump Gp-Unit Injector Hyd
| 11***75 | Washer; (13.5x32x8-mm Thk) | 1 |
| 12***53 | Valve Group-Solenoid | 1 |
| 12***73 | Gear-Pump Drive; (36 Teeth) | 1 |
205-1306 Regulator Gp-Fuel Pressure
| 20***06 | Name-Plate (Portuguese), Regulator Group-Fuel Pressure | 1 |
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
232-0343 Regulator Gp-Fuel Pressure
| 03***80 | Spacer; (9x16x36-mm) | 1 |
| 13***06 | Film-Identification; (Fuel) | 1 |
| 14***72 | Elbow Group | 1 |
241-2427 Separator Gp-Water
| 13***44 | Kit-Repair; (Fuel Level Gauge)(Fuel Level) | 1 |
| 15***36 | Sender As-Fuel Level | 1 |
| 1U***27 | Guide-Valve | 1 |
225-3336 Tank Gp-Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 22***36 | Tank Group-Fuel | 1 |
Hydraulic System
195-2997 Cartridge Gp-Vane Pump
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 4 |
| 16***95 | Seal As-Buffer | 1 |
| 16***04 | Seal-U-Cup | 1 |
8e-6128 Cylinder & Mtg Gp-Ripper
| 16***07 | Seal As-Buffer | 1 |
| 16***17 | Seal-U-Cup | 1 |
| 21***19 | Rod As | 1 |
9k-8659 Cylinder & Seal Gp-Bucket -Multipurpose Bucket
| 12***23 | Cylinder As; (Lh) | 1 |
| 16***00 | Seal Assem. | 1 |
| 16***07 | Seal-U-Cup | 1 |
8j-8498 Cylinder Gp-Bucket
| 12***22 | Cylinder As; (Rh) | 1 |
| 16***00 | Seal Assem. | 1 |
| 16***07 | Seal-U-Cup | 1 |
217-3991 Cylinder Gp-Lift
| 16***14 | Seal As-Buffer | 1 |
| 16***28 | Seal-U-Cup | 1 |
| 1D***28 | Bolt 8.26 cm(3.25 In.) Long | 3 |
122-8420 Cylinder Gp-Ripper -Lh-Lift
| 12***20 | Cylinder Group-Ripper; -Lh-Lift | 1 |
| 16***14 | Seal As-Buffer | 1 |
| 16***28 | Seal-U-Cup | 1 |
122-8421 Cylinder Gp-Ripper -Rh-Lift
| 12***21 | Cylinder Group-Ripper; -Rh-Lift | 1 |
| 17***79 | Kickout & Positioner Group | 1 |
| 18***28 | Control Group-Pilot Operated Hydraulic; -Bucket Lift, Dump | 1 |
3g-3874 Cylinder Gp-Tilt
| 12***10 | Lines Group-Attachment | 1 |
| 17***57 | Lines Group-Front; -Lift Arm | 1 |
| 18***23 | Valve Group-Pilot; -Bucket Lift, Tilt, Auxiliary | 1 |
2q-5456 Cylinder Gp-Tilt -Kickout, Pos Modification
| 18***20 | Valve Group-Pilot; -Bucket Lift, Tilt | 1 |
| 24***78 | Valve Group-Pilot | 1 |
| 25***95 | Film-Instruction; (Sgl Lever Implement Control) | 1 |
169-9100 Hydraulic Ar
| 12***10 | Lines Group-Attachment | 1 |
| 16***00 | Hydraulic Ar | 1 |
| 17***57 | Lines Group-Front; -Lift Arm | 1 |
190-1464 Hydraulic Ar
| 12***10 | Lines Group-Attachment | 1 |
| 17***57 | Lines Group-Front; -Lift Arm | 1 |
| 18***23 | Valve Group-Pilot; -Bucket Lift, Tilt, Auxiliary | 1 |
175-7286 Hydraulic Ar-3 Valve
| 12***10 | Lines Group-Attachment | 1 |
| 17***57 | Lines Group-Front; -Lift Arm | 1 |
| 17***86 | Hydraulic Ar-3 Valve | 1 |
175-7290 Hydraulic Ar-3 Valve
| 14***43 | Cover As | 1 |
| 17***90 | Hydraulic Ar-3 Valve | 1 |
| 18***79 | Setscrew | 1 |
175-7287 Hydraulic Ar-3 Valve
| 12***10 | Lines Group-Attachment | 1 |
| 17***87 | Hydraulic Ar-3 Valve | 1 |
| 18***23 | Valve Group-Pilot; -Bucket Lift, Tilt, Auxiliary | 1 |
175-7291 Hydraulic Ar-3 Valve
| 13***82 | Hose As | 1 |
| 13***83 | Hose As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
175-7289 Hydraulic Ar-3 Valve
| 14***43 | Cover As | 1 |
| 17***89 | Hydraulic Ar-3 Valve | 1 |
| 2B***41 | Spacer Guard Assembly To Bracket Assembly | 4 |
175-7288 Hydraulic Ar-3 Valve
| 12***10 | Lines Group-Attachment | 1 |
| 17***88 | Hydraulic Ar-3 Valve | 1 |
| 18***21 | Valve Group-Pilot; -Bucket Control, Auxiliary | 1 |
175-7279 Kickout & Positioner Gp
| 13***00 | Spacer; (11x25x50-mm Thk) | 1 |
| 13***98 | Clip | 1 |
| 14***48 | Hose As | 1 |
2q-5395 Kickout & Positioner Gp
| 03***90 | Connector-Flared | 4 |
| 1P***00 | Seal-Rectangular | 4 |
| 2Q***95 | Kickout & Positioner Group | 1 |
129-6610 Lines Gp-Attachment
| 12***10 | Lines Group-Attachment | 1 |
| 17***59 | Tube As | 2 |
| 17***60 | Hose As | 2 |
8v-7368 Lines Gp-Bucket -Multipurpose
| 17***60 | Hose As | 2 |
| 19***55 | Guard | 2 |
| 25***12 | Tube As | 2 |
190-3456 Lines Gp-Diverter Valve
| 0T***68 | Bolt,Machine; Tube Mounting And Tube To Junction Block Uoc:Bsv,Bsx | 8 |
| 14***55 | Union As | 1 |
| 14***38 | Clip-Loop | 2 |
175-3557 Lines Gp-Front -Lift Arm
| 10***36 | Clip | 1 |
| 10***29 | Stud; (M10x1.5-Thd) | 2 |
| 13***81 | Hose As | 1 |
216-4241 Lines Gp-Front -Lift Arm
| 13***76 | Block | 1 |
| 14***67 | Clamp; (Hose) | 8 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
190-3455 Lines Gp-Lift Cylinder
| 13***00 | Spacer; (11x25x50-mm Thk) | 1 |
| 14***51 | Tee Group | 2 |
| 15***34 | Plate | 2 |
220-8561 Lines Gp-Pilot
| 14***88 | Elbow Group | 4 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 4 |
| 14***92 | Tube As | 1 |
216-3201 Lines Gp-Pump
| 1P***04 | Seal - Rectangular (45mm Dia) | 3 |
| 1P***05 | Seal (Check Valve Outlet) | 2 |
| 1P***77 | Flange-Half (For Tilt Ports On Valve) | 2 |
190-3457 Lines Gp-Rear Attachment
| 19***57 | Lines Group-Rear Attachment | 1 |
| 2Q***95 | Kickout & Positioner Group | 1 |
| 2Q***56 | Cylinder Group-Tilt; -Kickout, Pos Modification | 1 |
148-9491 Lines Gp-Ripper
| 14***91 | Lines Group-Ripper | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 5B***51 | Fitting-Straight | 2 |
190-3454 Lines Gp-Tilt Cylinder
| 19***54 | Lines Group-Tilt Cylinder | 1 |
| 1K***72 | Locknut Horn To Guard | 2 |
| 7K***02 | Seal (In The Rod Hole) | 4 |
9z-8332 Modification Gp-Kickout & Pos
| 03***79 | Washer; (0.64x2.875x0.187-In Thk) | 3 |
| 11***10 | Valve; (Breaker Relief Valve) | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
9v-1120 Mounting Gp-Cylinder
| 03***97 | Ring-Retaining | 1 |
| 16***71 | Kit-Vane Pump | 1 |
| 16***73 | Kit-Seal; (Vane Epump) | 1 |
229-1181 Mounting Gp-Hydraulic Tank
| 03***81 | Bolt-Socket Head; (5/16-18x0.625-In) | 7 |
| 13***63 | Valve Group-Cooler Bypass; -Hydraulic Oil | 1 |
| 13***52 | Sensor Group-Temperature; -Transmission Oil-Xmsn, Torque Converter | 1 |
224-2990 Pump & Mounting Gp
| 1U***70 | Shim .178mm(.007in)Thk; 4.53mm(.178in.)Thk. | 2 |
| 1U***71 | Shim .25mm(.010in)Thk; 12.9mm(.508in.)Thk. | 3 |
| 21***10 | Body-Valve | 1 |
215-1432 Pump Gp-Vane -Implement
| 00***63 | Seal-O-Ring; (55.24mm Id) | 2 |
| 14***95 | Plug As | 1 |
| 14***08 | Plug As. | 1 |
215-5655 Tank & Filter Gp-Hydraulic
| 00***63 | Seal-O-Ring; (55.24mm Id) | 3 |
| 14***95 | Plug As | 1 |
| 14***08 | Plug As. | 1 |
9t-0762 Valve Gp-Relief -Auxiliary
| 10***66 | Adapter | 2 |
| 18***35 | Shim; (2.7-mm Thk) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
236-5819 Valve Gp-Control -Bucket Lift, Tilt
| 00***63 | Seal-O-Ring; (55.24mm Id) | 2 |
| 14***95 | Plug As | 1 |
| 14***08 | Plug As. | 1 |
259-1834 Valve Gp-Control -Bucket Lift, Tilt
| 13***06 | Cable As | 1 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 3 |
| 1A***57 | Pin--Yoke End | 1 |
219-6526 Valve Gp-Control -Multipurpose Bucket, Ripper-Pilot
| 00***63 | Seal-O-Ring; (55.24mm Id) | 3 |
| 14***95 | Plug As | 1 |
| 14***08 | Plug As. | 1 |
236-5820 Valve Gp-Control -Bucket Lift, Tilt, Auxiliary
| 13***37 | Retainer | 1 |
| 13***38 | Valve | 1 |
| 13***87 | Manifold | 1 |
259-1829 Valve Gp-Control -Bucket Lift, Tilt, Auxiliary
| 02***97 | Setscrew; (3/8-16x1.75-In) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 1 |
133-4063 Valve Gp-Cooler Bypass -Hydraulic Oil
| 13***63 | Valve Group-Cooler Bypass; -Hydraulic Oil | 1 |
| 13***06 | Cable As | 1 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 3 |
248-3080 Valve Gp-Diverter -Auxiliary Front, Rear Lines
| 13***34 | Kit-Spring; (Pilot Valve) | 2 |
| 13***61 | Setscrew-Hex Socket; (M5x0.8x16-mm) | 2 |
| 14***43 | Coil As | 2 |
227-5660 Valve Gp-Diverter -Auxiliary Front, Rear Lines
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***08 | Coil As | 3 |
| 15***08 | Kit-Pilot Valve; (Flange)(Pilot Valve Lift & Dump) | 1 |
9j-7128 Valve Gp-Diverter -Auxiliary Front, Rear Lines
| 02***97 | Setscrew; (3/8-16x1.75-In) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 1 |
129-4600 Valve Gp-Pilot -Bucket Lift, Tilt
| 09***59 | Setscrew-Socket; (M4x0.7-Thd)(M4x0.7 Thd) | 2 |
| 12***00 | Valve Group-Pilot; -Bucket Lift, Tilt | 1 |
| 14***52 | Ball; (Control Lever) | 1 |
129-4497 Valve Gp-Pilot -Auxiliary
| 12***97 | Valve Group-Pilot; -Ripper Lift, Lower | 1 |
| 13***61 | Setscrew-Hex Socket; (M5x0.8x16-mm) | 2 |
| 14***43 | Coil As | 1 |
247-4878 Valve Gp-Pilot
| 13***34 | Kit-Spring; (Pilot Valve) | 2 |
| 13***61 | Setscrew-Hex Socket; (M5x0.8x16-mm) | 2 |
| 14***43 | Coil As | 2 |
277-5400 Valve Gp-Pilot -Bucket Lift
| 09***59 | Setscrew-Socket; (M4x0.7-Thd)(M4x0.7 Thd) | 2 |
| 11***34 | Seal-O-Ring | 2 |
| 14***52 | Ball; (Control Lever) | 1 |
189-1523 Valve Gp-Pilot -Bucket Control, Auxiliary
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***34 | Seal-O-Ring | 2 |
| 15***71 | Kit-Plate; (Pilot Valve) | 1 |
277-5401 Valve Gp-Pilot -Bucket Tilt
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***08 | Coil As | 3 |
| 15***08 | Kit-Pilot Valve; (Flange)(Pilot Valve Lift & Dump) | 1 |
277-5403 Valve Gp-Pilot
| 10***52 | Valve Group-Relief | 1 |
| 27***03 | Valve Group-Pilot | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
189-1521 Valve Gp-Pilot -Bucket Control, Auxiliary
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***21 | Valve Group-Pilot; -Bucket Control, Auxiliary | 1 |
174-4171 Valve Gp-Pilot -Auxiliary
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***08 | Coil As | 3 |
| 13***65 | Plug | 2 |
247-4879 Valve Gp-Pilot -Bucket Lift, Tilt, Auxiliary
| 13***61 | Setscrew-Hex Socket; (M5x0.8x16-mm) | 2 |
| 14***43 | Coil As | 1 |
| 14***52 | Ball; (Control Lever) | 1 |
277-5404 Valve Gp-Pilot -Bucket Lift
| 27***04 | Valve Group-Pilot; -Bucket Lift | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***42 | Spring | 1 |
189-1520 Valve Gp-Pilot -Bucket Control
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***34 | Seal-O-Ring | 2 |
| 12***97 | Valve Group-Pilot; -Ripper Lift, Lower | 1 |
138-8141 Valve Gp-Pilot -Bucket Lift, Lower
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***41 | Valve Group-Pilot; -Bucket Raise, Lower | 2 |
152-4819 Valve Gp-Pilot -Bucket Tilt, Dump
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***65 | Plug | 6 |
| 13***41 | Valve Group-Pilot; -Bucket Raise, Lower | 1 |
247-4881 Valve Gp-Pilot
| 09***59 | Setscrew-Socket; (M4x0.7-Thd)(M4x0.7 Thd) | 2 |
| 14***52 | Ball; (Control Lever) | 1 |
| 15***54 | Kit-Spring; (Ports 1 & 3 (Forward/Reverse)) | 1 |
277-5402 Valve Gp-Pilot -Auxiliary
| 27***02 | Valve Group-Pilot; -Auxiliary | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***42 | Spring | 1 |
189-1522 Valve Gp-Pilot -Bucket Lift, Tilt
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***65 | Plug | 6 |
| 15***72 | Kit-Plate; (Pilot Valve) | 1 |
232-6196 Valve Gp-Relief -Main
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 15***83 | Cartridge As | 1 |
4t-7581 Valve Gp-Relief -Bucket Lift, Tilt
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3G***54 | Cap | 1 |
| 3G***57 | Gasket | 2 |
157-3843 Valve Gp-Relief -Charge Pressure
| 03***39 | Seal-O-Ring (Id=9.25mm) | 1 |
| 15***43 | Valve Group-Relief; -Charge Pressure | 1 |
| 4B***82 | Ball; (9.52mm) | 1 |
6e-6195 Valve Gp-Relief -Bucket Tilt
| 03***34 | Seal-O-Ring | 1 |
| 06***39 | Seal-O-Ring | 1 |
| 22***94 | Body | 1 |
1u-2226 Valve Gp-Selector & Press Cont -Pilot Lines
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 17***92 | Kit-Seal; (Solenoid Valve) | 1 |
| 1U***26 | Valve Group-Selector & Press Cont; -Pilot Lines | 1 |
4t-4073 Valve Gp-Shuttle -Dead End Lower
| 12***32 | Handle As | 1 |
| 13***66 | Step As | 2 |
| 19***94 | Lever & Bearing As | 1 |
152-8385 Valve Gp-Solenoid
| 10***25 | Clip | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
195-3739 Valve Gp-Solenoid
| 08***91 | Bolt; (M10x1.5x55-mm) | 5 |
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
| 10***99 | Valve As; (Air Conditioner Refrigerant) | 1 |
Implements
216-5131 Control Gp-Bucket
| 08***91 | Bolt; (M10x1.5x55-mm) | 5 |
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
| 10***99 | Valve As; (Air Conditioner Refrigerant) | 1 |
Lubrication System
179-7001 Adapter Gp-Oil Line
| 17***01 | Adapter Group-Oil Line; -Unit Injector Pump | 1 |
| 17***02 | Adapter Assem. | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
120-8971 Breather Gp -Engine
| 12***71 | Breather Group; -Engine | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 5N***85 | Washer-Sealing; (Sealing) | 1 |
215-3601 Filler Gp-Engine Oil
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 06***26 | Cap-Tube | 1 |
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
222-2244 Filter Gp-Engine Oil
| 12***07 | Base | 1 |
| 15***24 | Valve Group-Fluid Sampling; (3/8-18 Nptf Thd) | 1 |
| 16***40 | Base As-Oil Filter | 1 |
241-1758 Fumes Disposal Gp
| 20***36 | Hose-Fumes Disposal | 1 |
| 24***58 | Fumes Disposal Group | 1 |
| 3E***52 | Washer-Hard; (8.8x20.5x2.5-mm Thk) | 1 |
209-6892 Fumes Disposal Gp
| 17***68 | Bolt; (M8x1.25x85-mm) | 1 |
| 20***36 | Hose-Fumes Disposal | 1 |
| 20***92 | Fumes Disposal Group | 1 |
213-3937 Gauge Gp-Oil Level (Dipstick)
| 19***31 | Clip | 1 |
| 1F***67 | Clip 7t***28 Cable As To Fan Shroud | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
219-5853 Lines Gp-Engine Oil
| 21***52 | Tube Assem. | 1 |
| 21***53 | Lines Group-Engine Oil | 1 |
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
221-3464 Lines Gp-Turbocharger Oil
| 11***87 | Seal-O-Ring (23.16 mm Id) | 1 |
| 11***42 | Adapter | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
260-1942 Lines Gp-Turbocharger Oil
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***87 | Seal-O-Ring (23.16 mm Id) | 1 |
| 11***42 | Adapter | 1 |
225-3589 Mounting Gp-Engine Oil Filter
| 17***37 | Stud; (M10x1.5x18-mm, M10x1.5x45-mm) | 1 |
| 22***89 | Mounting Group-Engine Oil Filter | 1 |
| 7D***33 | Clip; (38.1mm Id) | 2 |
212-2270 Pump Gp-Engine Oil
| 20***97 | Pump Group-Engine Oil | 1 |
| 21***70 | Pump Group-Engine Oil | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
200-4497 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
Machine Arrangement
169-9097 Chassis Ar
| 12***59 | Guard Group-Bottom | 1 |
| 12***39 | Support Group-Platform | 1 |
| 12***30 | Mounting Group-Rops | 1 |
283-4648 Chassis Ar
| 19***15 | Guard Group-Lines; -Lift | 1 |
| 19***01 | Guard Group-Engine; -Waste Handling | 1 |
| 22***17 | Guard Group-Radiator; -Waste Handling | 1 |
223-8051 Chassis Ar -Waste Handling
| 19***15 | Guard Group-Lines; -Lift | 1 |
| 19***03 | Frame Group-Loader; -Waste Handling | 1 |
| 19***69 | Guard Group-Lighting | 1 |
191-9544 Chassis Ar -Waste Handling
| 19***15 | Guard Group-Lines; -Lift | 1 |
| 19***44 | Chassis Ar; -Waste Handling | 1 |
| 19***01 | Guard Group-Engine; -Waste Handling | 1 |
283-4644 Chassis Ar
| 19***15 | Guard Group-Lines; -Lift | 1 |
| 19***03 | Frame Group-Loader; -Waste Handling | 1 |
| 19***69 | Guard Group-Lighting | 1 |
283-4646 Chassis Ar
| 19***15 | Guard Group-Lines; -Lift | 1 |
| 19***01 | Guard Group-Engine; -Waste Handling | 1 |
| 19***03 | Frame Group-Loader; -Waste Handling | 1 |
230-8766 Chassis Ar -Waste Handling
| 19***15 | Guard Group-Lines; -Lift | 1 |
| 19***01 | Guard Group-Engine; -Waste Handling | 1 |
| 22***17 | Guard Group-Radiator; -Waste Handling | 1 |
280-9511 Conversion Ar-Machine
| 26***63 | Idler As | 2 |
| 28***11 | Conversion Ar-Machine | 1 |
169-9093 General Ar
| 16***93 | General Ar | 1 |
| 16***96 | Engine Ar-Complete | 1 |
| 16***97 | Chassis Ar | 1 |
223-8050 Transfer Station Ar -Waste Handling
| 19***43 | Precleaner Ar | 1 |
| 22***39 | Power Train Ar | 1 |
| 22***49 | Undercarriage Ar; -Waste Handling | 1 |
283-4660 Transfer Station Ar -Systemone
| 19***43 | Precleaner Ar | 1 |
| 22***39 | Power Train Ar | 1 |
| 28***44 | Chassis Ar | 1 |
230-8770 Waste Handling Ar -Guarding
| 19***99 | Air Cleaner Group; -Waste Handling | 1 |
| 22***49 | Undercarriage Ar; -Waste Handling | 1 |
| 23***58 | Power Train Ar; -Waste Handling | 1 |
283-4656 Waste Handling Ar -Systemone
| 23***58 | Power Train Ar; -Waste Handling | 1 |
| 28***48 | Chassis Ar | 1 |
| 28***54 | Undercarriage Ar; -Systemone | 1 |
283-4658 Waste Handling Ar -Systemone
| 19***43 | Precleaner Ar | 1 |
| 19***46 | Power Train Ar; -Waste Handling | 1 |
| 28***46 | Chassis Ar | 1 |
188-7310 Waste Handling Ar
| 18***10 | Waste Handling Ar | 1 |
| 19***43 | Precleaner Ar | 1 |
| 19***44 | Chassis Ar; -Waste Handling | 1 |
Operator Station
228-0652 Air Conditioner Gp -Cab
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
| 10***99 | Valve As; (Air Conditioner Refrigerant) | 1 |
| 11***02 | Boot | 2 |
225-2724 Air Conditioner Gp -Cab-Debris Resistant
| 08***91 | Bolt; (M10x1.5x55-mm) | 5 |
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
| 10***99 | Valve As; (Air Conditioner Refrigerant) | 1 |
267-8795 Air Conditioner Gp
| 17***63 | Cab Ar-Enclosed Rops | 1 |
| 22***24 | Air Conditioner Group; -Cab-Debris Resistant | 1 |
| 26***95 | Air Conditioner Group | 1 |
200-2907 Air Conditioner Gp
| 08***91 | Bolt; (M10x1.5x55-mm) | 5 |
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
| 10***99 | Valve As; (Air Conditioner Refrigerant) | 1 |
222-3473 Armrest Gp
| 22***73 | Armrest Group | 1 |
| 22***25 | Cab Ar-Enclosed Rops | 1 |
176-9763 Cab Ar-Enclosed Rops
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***25 | Screw-Flat Head; (M6x1x25-mm) | 6 |
| 12***55 | Plate | 2 |
225-2725 Cab Ar-Enclosed Rops
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 22***25 | Cab Ar-Enclosed Rops | 1 |
230-8755 Cab Ar-Enclosed Rops -Debris Resistant Air Conditioner
| 10***59 | Spacer; (13.5-mm Thk) | 1 |
| 12***95 | Pulley As-Idler | 1 |
| 18***06 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
176-9901 Cab Ar-Open Rops
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 17***01 | Cab Ar-Open Rops | 1 |
183-5106 Compressor Gp-Refrigerant
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***89 | Guard-Fan | 2 |
189-2229 Compressor Gp-Refrigerant
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***72 | Seal; (135-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
245-4667 Condenser & Mtg Gp-Refrigerant
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***72 | Seal; (135-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
245-4413 Condenser Gp-Refrigerant
| 18***82 | Panel Group-Circuit Breaker | 1 |
| 18***86 | Control Group-Direction & Speed; -Hydrostatic Drive | 1 |
| 18***03 | Clip | 3 |
304-7249 Condenser Gp-Refrigerant
| 00***70 | Washer (Spring); (Conical) | 6 |
| 09***15 | Ring-Retaining | 1 |
| 09***31 | Nut; (M12x1.75-Thd) | 2 |
5q-9389 Condenser Gp-Refrigerant -Debris Resistant Air Conditioner
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***72 | Seal; (135-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
175-2540 Condenser Gp-Refrigerant
| 17***40 | Condenser Group-Refrigerant | 1 |
| 18***82 | Panel Group-Circuit Breaker | 1 |
| 18***86 | Control Group-Direction & Speed; -Hydrostatic Drive | 1 |
183-4566 Console Gp -Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***08 | Coil As | 3 |
| 13***65 | Plug | 2 |
183-6586 Control Gp-Direction & Speed -Hydrostatic Drive
| 12***60 | Control Group-Steering | 1 |
| 12***93 | Control Group-Pedal; -Speed Overide, Brake | 1 |
| 18***86 | Control Group-Direction & Speed; -Hydrostatic Drive | 1 |
247-4880 Control Gp-Joystick -Bucket Lift, Tilt
| 11***27 | Screw-Machine; (M6x1x30-mm) | 4 |
| 13***67 | Grommet | 1 |
| 14***26 | Plug | 1 |
183-6505 Control Gp-Pedal -Steering, Brake
| 11***27 | Screw-Machine; (M6x1x30-mm) | 4 |
| 13***67 | Grommet | 1 |
| 14***26 | Plug | 1 |
123-6493 Control Gp-Pedal -Speed Overide, Brake
| 11***27 | Screw-Machine; (M6x1x30-mm) | 4 |
| 12***93 | Control Group-Pedal; -Speed Overide, Brake | 1 |
| 13***67 | Grommet | 1 |
189-2928 Control Gp-Pilot Operated Hyd -Bucket
| 11***49 | Screw-Pan Head; (M5x0.8x30-mm) | 4 |
| 12***90 | Spacer; (10.2x16x16-mm Thk) | 4 |
| 12***64 | Plate | 1 |
123-6160 Control Gp-Steering
| 11***76 | Filter Element-Air; (Cab Recirculation) | 1 |
| 12***60 | Control Group-Steering | 1 |
| 12***24 | Cover | 1 |
154-7443 Control Gp-Unprgmed Monitor -Caterpillar Monitoring System
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 16 |
| 15***86 | Screw; (M4x0.7x16-mm) | 2 |
| 15***43 | Control Group-Unprgmed Monitor; -Caterpillar Monitoring System | 1 |
184-7262 Cover Gp-Cab
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 16 |
| 15***86 | Screw; (M4x0.7x16-mm) | 2 |
| 16***73 | Louver As | 2 |
169-1369 Cover Gp-Cab Filter
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 16 |
| 16***73 | Louver As | 2 |
| 16***78 | Louver As | 2 |
183-4562 Dash Gp -Enclosed Rops
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***70 | Handle Assem. | 2 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 8 |
206-8530 Dash Gp -Open Rops
| 11***25 | Screw-Flat Head; (M6x1x25-mm) | 6 |
| 12***55 | Plate | 2 |
| 12***72 | Floor Mat; (Rh) | 1 |
126-1626 Door Gp-Cab -Enclosed Rops
| 12***26 | Door Group-Cab; -Enclosed Rops | 1 |
| 13***19 | Handle; (Lower) | 4 |
| 13***21 | Handle; (Upper) | 2 |
187-4217 Duct Gp-Cab Air
| 12***62 | Plate | 1 |
| 15***18 | Seal | 1 |
| 15***19 | Cover | 1 |
183-4573 Floor Mat Gp
| 12***62 | Plate | 1 |
| 16***36 | Seal | 1 |
| 16***37 | Cover | 1 |
189-2049 Handhold Gp
| 01***60 | Grommet | 1 |
| 11***09 | Knob-Control | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
188-8041 Hatch Gp
| 09***13 | Clip | 2 |
| 12***76 | Film-Instruction; (Machine Calibration Switches)(Service Mode Switches) | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
169-3512 Heater Gp-Cab
| 12***56 | Grill | 2 |
| 14***28 | Antenna As | 1 |
| 16***12 | Heater Group-Cab | 1 |
175-7272 Installation Gp-Cab
| 12***57 | Button As | 2 |
| 12***58 | Lever | 2 |
| 12***59 | Cable As | 2 |
186-3109 Installation Gp-Radio
| 14***97 | Cap | 2 |
| 18***09 | Installation Group-Radio | 1 |
| 18***51 | Spacer; (9x20x5-mm Thk) | 4 |
190-8131 Latch Gp -Door Release
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 19***31 | Latch Group; -Door Release | 1 |
183-4574 Liner Gp-Cab
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
| 18***74 | Liner Group-Cab | 1 |
184-7263 Mirror Gp-Rear View
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***63 | Mirror Group-Rear View | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
166-6928 Module Gp-Quad Gauge
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 16***28 | Module Group-Quad Gauge; -Engine Coolant Temp, Transmission Oil Temp, Hydraulic Oil Temp, Fuel Level | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
146-6149 Motor Gp-Window Wiper -Front
| 14***49 | Motor Group-Window Wiper; -Front | 1 |
| 22***96 | Antenna; (Flexible)(Flex) | 1 |
| 22***98 | Antenna As | 1 |
251-3263 Motor Gp-Window Wiper -Rear
| 11***31 | Mount Assem. | 8 |
| 12***23 | Plate | 2 |
| 12***95 | Washer; (32x134x12-mm Thk) | 4 |
330-5047 Motor Gp-Window Wiper
| 11***31 | Mount Assem. | 8 |
| 12***23 | Plate | 2 |
| 12***95 | Washer; (32x134x12-mm Thk) | 4 |
226-8610 Mounting Gp-Antenna
| 10***25 | Clip | 2 |
| 11***85 | Knob-Wiper Switch; (Rear) | 1 |
| 11***03 | Resistor As | 1 |
129-6630 Mounting Gp-Rops
| 10***25 | Clip | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***03 | Resistor As | 1 |
188-9610 Panel Gp-Instrument -Enclosed Rops
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 16 |
| 11***94 | Wheel-Blower; (Ccw) | 1 |
206-8529 Panel Gp-Instrument -Open Rops
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 16 |
187-7354 Pressurizer Gp-Cab -Enclosed Rops
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 16 |
227-7254 Pressurizer Gp-Cab -Open Rops
| 19***54 | Sleeve | 1 |
| 22***54 | Pressurizer Group-Cab; -Open Rops | 1 |
200-5729 Radio Gp -Am/Fm/Wb
| 13***65 | Bumper | 1 |
| 14***81 | Knob-Select; (Radio) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
173-6532 Radio Gp -Am/Fm Cassette
| 13***65 | Bumper | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
294-2006 Radio Gp -Am/Fm/Wb Cd Player
| 17***83 | Washer-Rubber; (30x60x3mm Thk) | 1 |
| 17***85 | Washer; (8.8x35x3-mm Thk) | 2 |
| 17***86 | Washer; (17x60x3-mm Thk) | 6 |
146-3090 Radio Gp -Am/Fm Cassette
| 14***81 | Knob-Select; (Radio) | 1 |
| 14***90 | Radio Group; -Am/Fm Cassette | 1 |
| 19***54 | Sleeve | 1 |
284-8953 Radio Gp -Am/Fm/Wb Cd Player
| 19***54 | Sleeve | 1 |
| 28***53 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
331-5292 Radio Gp -Am/Fm/Wb
| 17***85 | Washer; (8.8x35x3-mm Thk) | 2 |
| 17***86 | Washer; (17x60x3-mm Thk) | 4 |
| 17***38 | Roof As | 1 |
250-3799 Radio Gp -Am/Fm/Wb, Cassette
| 13***65 | Bumper | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
241-4936 Radio Gp -Am/Fm/Wb Cd Player
| 13***66 | Lead-Antenna | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***17 | Support-Radio | 1 |
250-3794 Radio Gp -Am/Fm/Wb
| 14***81 | Knob-Select; (Radio) | 1 |
| 19***54 | Sleeve | 1 |
| 25***94 | Radio Group; -Am/Fm/Wb | 1 |
262-9163 Radio Gp -Am/Fm/Wb/Cd Player
| 13***65 | Bumper | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 17***85 | Washer; (8.8x35x3-mm Thk) | 2 |
| 17***86 | Washer; (17x60x3-mm Thk) | 4 |
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
225-6275 Roof Gp
| 12***26 | Door Group-Cab; -Enclosed Rops | 1 |
| 12***06 | Bumper As | 4 |
| 14***45 | Baffle | 2 |
221-7160 Rops Ar-Open
| 19***66 | Washer-Hard; (11x25x10-mm Thk) | 1 |
| 22***60 | Rops Ar-Open | 1 |
| 22***58 | Support As; (Lh) | 1 |
183-4594 Rops Gp-Enclosed
| 14***21 | Kit-Clip; (Seat) | 1 |
| 18***94 | Rops Group-Enclosed | 1 |
| 20***48 | Absorber As-Shock; (Sideshift) | 1 |
268-0800 Screen Gp-Cab -Windshield
| 12***13 | Tank | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 3 |
223-7960 Screen Gp-Cab -Windshield
| 20***48 | Absorber As-Shock; (Sideshift) | 1 |
| 22***60 | Screen Group-Cab; -Windshield | 1 |
| 24***68 | Cover As | 1 |
227-9231 Seat Gp -Cloth, Air
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 2 |
| 14***40 | Visor-Sun | 1 |
| 22***31 | Seat Group; -Cloth, Air | 1 |
227-9232 Seat Gp -Vinyl, Air
| 19***61 | Glass-Window; (Front) | 1 |
| 19***62 | Glass-Window; (Rear) | 1 |
| 19***63 | Glass-Window; (Lh) | 1 |
196-5456 Tank Gp-Window Washer
| 12***03 | Arm-Window Wiper; (Front Window) | 1 |
| 14***49 | Motor Group-Window Wiper; -Front | 1 |
| 18***73 | Arm As-Wiper; (Rear Window) | 1 |
189-2119 Visor Gp-Cab
| 18***19 | Visor Group-Cab | 1 |
| 22***88 | Adapter-Tip; (K-80, Rh) | 1 |
| 22***89 | Adapter-Tip; (K-80, Lh) | 1 |
190-2196 Window Gp-Cab
| 19***96 | Window Group-Cab | 1 |
| 22***97 | Adapter-Tip; (K-90, Long, Center) | 6 |
| 22***98 | Adapter-Tip; (K-90, Long, Rh) | 1 |
185-4709 Wiper Gp-Window
| 18***09 | Wiper Group-Window | 1 |
| 22***87 | Adapter-Tip; (K-80, 2-Strap, Center) | 6 |
| 22***88 | Adapter-Tip; (K-80, Rh) | 1 |
Power Train
152-9137 Actuator Gp-Pump -Hydrostatic Drive
| 14***39 | Tube As | 1 |
| 14***78 | Gauge-Oil Level (Dipstick); (Pump Drive)(Pump Drive) | 1 |
| 15***37 | Actuator Group-Pump; -Hydrostatic Drive | 1 |
228-7786 Cooler Gp-Transmission Oil
| 11***18 | Valve-Drain; (Hydraulic Tank) | 1 |
| 14***37 | Tube As | 1 |
| 22***86 | Cooler Group-Transmission Oil | 1 |
110-0924 Drive Gp-Flexible Coupling
| 11***24 | Drive Group-Flexible Coupling | 1 |
| 11***33 | Bracket As | 1 |
| 20***99 | Filter Group-Oil; -Power Train-Charge | 1 |
175-7275 Drive Gp-Pump
| 12***84 | Spacer; (11x25x36-mm Thk) | 1 |
| 17***75 | Drive Group-Pump | 1 |
| 20***99 | Filter Group-Oil; -Power Train-Charge | 1 |
143-9245 Filler Gp-Power Train Oil
| 12***84 | Spacer; (11x25x36-mm Thk) | 1 |
| 14***45 | Filler Group-Power Train Oil | 1 |
| 20***41 | Filter Group-Oil; -Power Train-Case Drain | 1 |
205-8020 Filter & Mtg Gp-Power Train
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 20***20 | Filter & Mtg Group-Power Train | 1 |
209-5599 Filter Gp-Oil -Power Train-Charge
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 20***99 | Filter Group-Oil; -Power Train-Charge | 1 |
| 22***18 | Filter-Oil; (Ultra High Efficiency)(Power Train) | 1 |
232-1864 Filter Gp-Oil -Power Train-Charge
| 06***99 | Cup-Roller Bearing | 12 |
| 11***33 | Cone-Bearing | 2 |
| 11***34 | Cup-Bearing | 2 |
209-5641 Filter Gp-Oil -Power Train-Case Drain
| 06***99 | Cup-Roller Bearing | 12 |
| 11***33 | Cone-Bearing | 2 |
| 11***34 | Cup-Bearing | 2 |
230-8759 Final Drive & Brake Gp
| 10***14 | Seal-O-Ring | 1 |
| 12***98 | Seat | 2 |
| 13***22 | Plug-Break Off | 3 |
223-8046 Final Drive & Brake Gp -Waste Handling
| 22***45 | Idler Group-Front; -Waste Handler | 1 |
| 22***46 | Final Drive & Brake Group; -Waste Handling | 1 |
| 23***59 | Final Drive & Brake Group | 1 |
229-8520 Final Drive & Brake Gp
| 22***20 | Final Drive & Brake Group | 1 |
| 23***59 | Final Drive & Brake Group | 1 |
| 28***52 | Idler Group-Front | 1 |
230-8753 Guard Gp-Seal
| 12***94 | Plug; (Break Off) | 1 |
| 12***56 | Cap | 1 |
| 12***77 | Bushing-Coupling | 1 |
276-8060 Guard Gp-Seal
| 12***95 | Block | 1 |
| 12***85 | Flange | 1 |
| 12***27 | Elbow | 1 |
205-2138 Head Gp-Motor -Hydrostatic Drive
| 12***95 | Block | 1 |
| 12***85 | Flange | 2 |
| 12***27 | Elbow | 1 |
225-1420 Head Gp-Pump -Hydrostatic Drive
| 12***95 | Block | 1 |
| 12***85 | Flange | 1 |
| 14***90 | Valve As-Check; (Power Train Oil) | 1 |
215-6249 Lines Gp-Charge Pressure
| 10***05 | Tee-O-Ring | 1 |
| 14***27 | Connector Group | 1 |
| 14***35 | Connect Group; (Each Includes) | 2 |
205-2968 Lines Gp-Control
| 10***05 | Tee-O-Ring | 1 |
| 14***27 | Connector Group | 1 |
| 14***35 | Connect Group; (Each Includes) | 3 |
176-3278 Lines Gp-Drain
| 14***16 | Connector Group | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
211-0356 Lines Gp-Hydrostatic
| 14***16 | Connector Group | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
175-7278 Lines Gp-Power Train Cooler
| 17***78 | Lines Group-Power Train Cooler | 1 |
| 18***53 | Motor Group-Piston; -Hydrostatic Drive | 2 |
| 7X***63 | Bolt-Plt; (M20 X 2.5 X 60) | 8 |
176-7188 Lines Gp-Synchronizing
| 13***13 | Cap-Dust | 1 |
| 13***14 | Cap-Dust | 1 |
| 13***15 | Nut; (M16x2-Thd) | 2 |
205-8019 Motor & Mtg Gp-Travel -Hydrostatic Drive
| 20***19 | Motor & Mtg Group-Travel; -Hydrostatic Drive | 1 |
| 22***46 | Final Drive & Brake Group; -Waste Handling | 1 |
187-3453 Motor Gp-Piston -Hydrostatic Drive
| 18***53 | Motor Group-Piston; -Hydrostatic Drive | 1 |
| 21***43 | Guard Group-Final Drive | 1 |
| 22***46 | Final Drive & Brake Group; -Waste Handling | 1 |
191-9546 Power Train Ar -Waste Handling
| 19***46 | Power Train Ar; -Waste Handling | 1 |
| 24***72 | Pump Group-Piston; -Hydrostatic Drive | 2 |
| 7X***15 | Washer-Hard; (17x35x5-mm Thk) | 8 |
223-8039 Power Train Ar
| 14***45 | Filler Group-Power Train Oil | 1 |
| 15***47 | Bracket | 1 |
| 17***75 | Drive Group-Pump | 1 |
169-9098 Power Train Ar
| 16***98 | Power Train Ar | 1 |
| 23***59 | Final Drive & Brake Group | 1 |
230-8758 Power Train Ar -Waste Handling
| 14***45 | Filler Group-Power Train Oil | 1 |
| 17***75 | Drive Group-Pump | 1 |
| 23***58 | Power Train Ar; -Waste Handling | 1 |
219-3300 Pump & Mtg Gp-Power Train
| 11***64 | Orifice | 1 |
| 12***75 | Screw-Lock | 1 |
| 12***82 | Pin-Threaded | 1 |
205-8018 Pump & Mtg Gp-Power Train -Hydrostatic Drive
| 12***77 | Bushing-Coupling | 1 |
| 14***09 | Ring | 1 |
| 15***07 | Shaft | 1 |
152-9890 Pump Gp-Charge -Hydrostatic Drive
| 11***70 | Ring-Retaining | 1 |
| 12***00 | Piston As | 9 |
| 12***01 | Spring Set | 1 |
249-8572 Pump Gp-Piston -Hydrostatic Drive
| 19***73 | Segment-Sprocket | 5 |
| 24***72 | Pump Group-Piston; -Hydrostatic Drive | 1 |
| 3S***82 | Bolt; (5/8-18x1.84-In) | 20 |
246-5043 Rotating Gp-Motor -Hydrostatic Drive
| 12***60 | Plug | 20 |
| 14***67 | Elbow | 1 |
| 14***68 | Elbow As | 1 |
250-1902 Rotating Gp-Pump -Hydrostatic Drive
| 15***85 | Valve Group-Solenoid; -Hydraulic Oil Cooler Shutoff | 1 |
| 18***08 | Valve & Mtg Group-Control; -Hydrostatic Transmission | 1 |
| 19***39 | Valve Group-Solenoid; -Pressure Reducing | 5 |
215-7173 Segment Gp-Sprocket
| 15***85 | Valve Group-Solenoid; -Hydraulic Oil Cooler Shutoff | 1 |
| 18***08 | Valve & Mtg Group-Control; -Hydrostatic Transmission | 1 |
| 19***39 | Valve Group-Solenoid; -Pressure Reducing | 4 |
183-2808 Valve & Mtg Gp-Control -Hydrostatic Transmission
| 17***68 | Seat | 1 |
| 17***69 | Poppet | 1 |
| 17***70 | Spring | 1 |
197-0383 Valve & Mtg Gp-Solenoid -Brake, Steering, Transmission
| 13***54 | Plug As | 2 |
| 19***83 | Valve & Mtg Group-Solenoid; -Brake, Steering, Transmission | 1 |
| 1R***96 | Bolt (35mm Long); (M6x1x35-mm) | 5 |
175-2440 Valve Gp-Check
| 13***22 | Plug-Break Off | 2 |
| 13***23 | Plug-Break Off | 1 |
| 13***27 | Ring | 1 |
175-2863 Valve Gp-Flushing -Hydrostatic Drive
| 17***72 | Kit-Seal; (Pressure, Flow Compensator) | 1 |
| 17***63 | Valve Group-Flushing; -Hydrostatic Drive | 1 |
175-2427 Valve Gp-Motor Control -Pilot Pressure
| 08***39 | Seal-O-Ring (Id=26.64mm) | 2 |
| 12***63 | Seal-O-Ring | 2 |
| 17***27 | Valve Group-Motor Control; -Pilot Pressure | 1 |
175-2441 Valve Gp-Motor Control -Pressure Override
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 17***41 | Valve Group-Motor Control; -Pressure Override | 1 |
175-2442 Valve Gp-Motor Control -Pressure Reducing
| 13***13 | Valve Group-Solenoid | 1 |
| 17***93 | Plug As | 1 |
| 17***42 | Valve Group-Motor Control; -Pressure, Flow Compensator | 1 |
175-2426 Valve Gp-Motor Control -Pilot Pressure
| 17***26 | Valve Group-Motor Control; -Pilot Pressure | 1 |
| 17***73 | Spool | 1 |
| 19***79 | Plug | 1 |
217-1390 Valve Gp-Pump Control -Pressure, Flow Compensator
| 1S***45 | Spacer; (58.9x86x11-mm Thk) | 6 |
| 21***90 | Valve Group-Pump Control; -Pressure, Flow Compensator | 1 |
| 21***18 | Bar As-Striker | 1 |
130-6913 Valve Gp-Solenoid
| 13***13 | Valve Group-Solenoid | 1 |
| 17***19 | Bracket As; (Rear, Lh) | 1 |
| 17***20 | Bracket As; (Rear, Rh) | 1 |
208-5374 Valve Gp-Synchronizing -Drive Pump
| 13***31 | Film-Stripe; (Caterpillar)(Front) | 1 |
| 16***38 | Shim; (2-mm Thk) | 8 |
| 17***22 | Latch As; (Yellow) | 2 |
Service Equipment And Supplies
234-1865 Film Gp
| 19***06 | Film-Notice; (Radio) | 1 |
| 23***49 | Film; (Cab Removal) | 1 |
| 23***65 | Film Group | 1 |
235-6987 Film Gp -Waste Handling
| 11***61 | Film - Air Cleaner (Later Machines Only) | 1 |
| 20***98 | Film-Notice; (Radio) | 1 |
| 23***56 | Film; (Cab Removal) | 1 |
175-7297 Plate & Film Gp -Spanish
| 17***97 | Plate & Film Group; -Spanish | 1 |
| 20***94 | Film-Notice; (Radio) | 1 |
| 23***52 | Film; (Cab Removal) | 1 |
175-7303 Plate & Film Gp -Dutch
| 10***09 | Film-Warning; (Jumper Cables) | 2 |
| 10***30 | Plate-Warning; (Do Not Operate) | 1 |
| 10***87 | Film-Notice; ( Window Cleaning) | 1 |
254-7208 Plate & Film Gp -International
| 25***08 | Plate & Film Group; -International | 1 |
175-7296 Plate & Film Gp -French
| 12***11 | Film-Instruction; (Machine Calibration Switches) | 1 |
| 17***96 | Plate & Film Group; -French | 1 |
| 19***07 | Film-Notice; (Radio) | 1 |
175-7302 Plate & Film Gp -Greek
| 11***56 | Film-Information; (Radial Seal) | 1 |
| 12***91 | Plate-Warning; (High Pressure Cylinder) | 2 |
| 12***16 | Film-Instruction; (Machine Calibration Switches) | 1 |
195-9848 Plate & Film Gp -Turkish
| 12***78 | Locknut; (M6x1-Thd) | 3 |
| 19***92 | Hinge As | 1 |
| 19***95 | Guard As | 1 |
250-5573 Plate & Film Gp -U.S.
| 25***73 | Plate & Film Group; -U.S. | 1 |
175-7304 Plate & Film Gp -Swedish
| 10***08 | Film-Warning; (Jump Start, Read Omm) | 2 |
| 10***29 | Plate-Warning; (Do Not Operate) | 1 |
| 10***86 | Film-Notice; (Window Cleaning)(Window Cleaning) | 1 |
175-7298 Plate & Film Gp -Portuguese
| 11***58 | Film - Air Cleaner (Later Machines Only) | 1 |
| 13***86 | Film-Instruction; (Air Conditioner) | 1 |
| 17***98 | Plate & Film Group; -Portuguese | 1 |
175-7273 Plate & Film Gp -U.S.
| 17***73 | Plate & Film Group; -U.S. | 1 |
| 20***96 | Film-Notice; (Radio) | 1 |
| 21***75 | Film-Warning; (Elc) | 1 |
195-9846 Plate & Film Gp -Norwegian
| 19***46 | Plate & Film Group; -Norwegian | 1 |
| 22***45 | Film-Warning; (Seat Belt, International) | 1 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
175-7300 Plate & Film Gp -Italian
| 11***55 | Film-Air Cleaner (Later Amchines Only) | 1 |
| 12***15 | Film-Instruction; (Machine Calibration Switches) | 1 |
| 13***88 | Film-Instruction; (Air Conditioner) | 1 |
175-7299 Plate & Film Gp -German
| 12***14 | Film-Instruction; (Machine Calibration Switches) | 1 |
| 13***87 | Film-Instruction; (Air Conditioner) | 1 |
| 17***99 | Plate & Film Group; -German | 1 |
175-7306 Plate & Film Gp -Finnish
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 15***97 | Film-Identification; (Hydraulic Test Ports) | 1 |
| 15***64 | Film; (Instruction) (Hydraulic Oil) (On Forward Of And Above The Hydraulic Tank Sight Gage On Tank Surface) | 1 |
175-7305 Plate & Film Gp -Japanese
| 15***09 | Film-Information; (Air Cleaner) | 1 |
| 17***05 | Plate & Film Group; -Japanese | 1 |
| 17***58 | Plate-Warning; (Do Not Operate) | 1 |
175-7301 Plate & Film Gp -Danish
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 12***17 | Film-Instruction; (Machine Calibration Switches) | 1 |
| 13***90 | Film-Instruction; (Air Conditioner) | 1 |
192-4885 Protection Gp-Vandalism -Dashboard
| 19***85 | Protection Group-Vandalism; -Dashboard | 1 |
Steering And Braking System
190-3458 Lines Gp-Brake
| 19***58 | Lines Group-Brake | 1 |
| 7K***02 | Seal (In The Rod Hole) | 2 |
| 7K***04 | Seal (In The Cylinder Mounting Hole) | 2 |
Undercarriage
211-8083 Roller Gp-Track Carrier -High Temperature
| 12***66 | Roller Group-Track-Double Flange | 1 |
| 21***83 | Roller Group-Track Carrier; -High Temperature | 1 |
| 23***88 | Roller Group-Track-Double Flange; -Heavy-Duty | 1 |
6y-1781 Roller Gp-Track Carrier
| 11***98 | Bushing Assem. | 2 |
| 11***02 | Shaft-Track Roller | 1 |
| 11***48 | Ring-Retaining | 2 |
235-5974 Roller Gp-Track Carrier -Heavy-Duty, Systemone
| 21***92 | Roller Group-Track-Double Flange; -High Temperature | 1 |
| 23***74 | Roller Group-Track Carrier; -Heavy-Duty, Systemone | 1 |
| 6V***45 | Bolt; (M20x2.5x70-mm) | 4 |
238-0094 Adjustment Gp-Hydraulic Track
| 23***94 | Adjustment Group-Hydraulic Track | 1 |
| 31***80 | Cap-Track Roller | 2 |
| 8T***60 | Bolt; (M20x2.5x90-mm) | 4 |
236-7890 Adjustment Gp-Hydraulic Track
| 10***13 | Washer-Hard; (22x60x6-mm Thk) | 2 |
| 21***53 | Guard As; (Rh) | 1 |
| 21***54 | Guard As; (Lh) | 1 |
211-8152 Bar Gp-Equalizer -High Temperature
| 21***52 | Bar Group-Equalizer; -High Temperature | 1 |
| 22***98 | Bearing-Sleeve | 2 |
| 22***99 | Bearing-Sleeve | 2 |
215-9599 Cap Gp-Track Roller -Systemone
| 21***99 | Cap Group-Track Roller; -Systemone-Fine Grading | 1 |
| 22***98 | Bearing-Sleeve | 2 |
| 22***99 | Bearing-Sleeve | 2 |
3w-8497 Bar Gp-Equalizer
| 19***01 | Frame As; (Rh) | 1 |
| 19***02 | Frame As; (Lh) | 1 |
| 22***98 | Bearing-Sleeve | 1 |
239-4811 Frame Gp-Track Roller
| 13***15 | Plate | 1 |
| 13***16 | Plate | 1 |
| 19***24 | Guard; (Lh Inner/Rh Outer) | 2 |
192-4126 Frame Gp-Track Roller
| 13***15 | Plate | 1 |
| 13***16 | Plate | 1 |
| 13***19 | Guard As | 1 |
281-2433 Frame Gp-Track Roller -High Temperature
| 21***71 | Guard As; (Rh) | 1 |
| 21***72 | Guard As; (Lh) | 1 |
| 28***33 | Frame Group-Track Roller; -High Temperature | 1 |
139-9021 Guard Gp-Track
| 13***21 | Guard Group-Track | 1 |
| 3W***40 | Plate | 4 |
| 3W***89 | Guard As; (Inner, Rh; Outer, Lh) | 2 |
215-7018 Guard Gp-Track Guide
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 2 |
| 1J***02 | Seal-Lip Type | 4 |
| 21***18 | Guard Group-Track Guide | 1 |
190-5314 Guard Gp-Track Guide -Rotating Bushing Tracks
| 19***14 | Guard Group-Track Guide; -Rotating Bushing Tracks | 1 |
| 19***17 | Guard As; (Rh Outer/Lh Inner) | 2 |
| 19***18 | Guard As; (Rh Inner/Lh Outer) | 2 |
190-5315 Guard Gp-Track Roller
| 19***15 | Guard Group-Track Roller | 1 |
| 1F***36 | Seal-Lip Type | 4 |
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 4 |
3w-8488 Guard Gp-Track Roller
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 2 |
| 1J***02 | Seal-Lip Type | 4 |
| 22***31 | Idler | 1 |
283-9244 Idler Gp -Lh, Systemone
| 28***44 | Idler Group; -Lh, Systemone | 1 |
| 2Q***28 | Idler As | 2 |
| 3W***03 | Sleeve | 1 |
283-9243 Idler Gp -Rh, Systemone
| 1F***36 | Seal-Lip Type | 4 |
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 4 |
| 1J***02 | Seal-Lip Type | 8 |
221-9047 Idler Gp-Front
| 22***47 | Idler Group-Front | 1 |
| 23***94 | Adjustment Group-Hydraulic Track | 2 |
| 5Q***52 | Support As | 2 |
233-2168 Idler Gp-Front -Waste Handling
| 22***31 | Idler | 2 |
| 23***68 | Idler Group-Front; -Waste Handling | 1 |
| 25***83 | Shim; (12-mm Thk) | 4 |
240-9423 Idler Gp-Front
| 22***99 | Bearing-Sleeve | 2 |
| 23***10 | Strip | 4 |
| 23***90 | Adjustment Group-Hydraulic Track | 2 |
283-4652 Idler Gp-Front
| 15***71 | Ring; (Thrust) | 80 |
| 16***19 | Track Pin | 40 |
| 20***44 | Seal As | 80 |
257-7046 Idler Gp-Front -Systemone
| 25***46 | Idler Group-Front; -Systemone | 1 |
| 26***63 | Idler As | 2 |
| 5Q***63 | Link As; (Outer, Rh; Inner, Lh) | 2 |
282-1554 Idler Gp-Front -Systemone
| 15***71 | Ring; (Thrust) | 74 |
| 16***19 | Track Pin | 37 |
| 20***44 | Seal As | 74 |
238-9548 Idler Gp-Front -Systemone
| 1J***02 | Seal-Lip Type | 8 |
| 22***99 | Bearing-Sleeve | 2 |
| 23***10 | Strip | 4 |
223-8045 Idler Gp-Front -Waste Handler
| 19***99 | Guard As; (Rh Outer-Lh Inner) | 2 |
| 19***00 | Guard As; (Rh Inner-Lh Outer) | 2 |
| 22***45 | Idler Group-Front; -Waste Handler | 1 |
278-8649 Idler Gp-Front -High Temperature
| 15***71 | Ring; (Thrust) | 148 |
| 16***21 | Pin-Track | 37 |
| 16***54 | Joint As-Track Link; (Rh)(Rotating Bushing Track) | 36 |
176-3692 Link As-Track
| 17***92 | Link As-Track | 1 |
| 23***82 | Cartridge As-Track Link | 2 |
| 23***99 | Track Link | 2 |
236-9865 Link As-Track
| 23***65 | Link As-Track | 1 |
| 29***85 | Cartridge As-Track Link | 2 |
| 6Y***73 | Plug; (Clear) | 2 |
230-6167 Link As-Track
| 23***67 | Link As-Track | 1 |
| 23***79 | Link As-Track Box; -Link Box | 1 |
| 23***82 | Cartridge As-Track Link | 1 |
297-4787 Link As-Track Box -Link Box, Offset
| 21***99 | Cap Group-Track Roller; -Systemone-Fine Grading | 12 |
| 23***57 | Roller Group-Track-Single Flange; -Systemone | 12 |
| 23***74 | Roller Group-Track Carrier; -Heavy-Duty, Systemone | 2 |
234-9679 Link As-Track Box -Link Box
| 23***79 | Link As-Track Box; -Link Box | 1 |
| 26***63 | Link As-Track Box; -Systemone | 1 |
| 29***85 | Cartridge As-Track Link | 1 |
264-9763 Link As-Track Box -Link Box
| 26***63 | Link As-Track Box; -Systemone | 1 |
| 29***85 | Cartridge As-Track Link | 1 |
| 29***86 | Link As-Track Box; -Link Box | 1 |
297-4786 Link As-Track Box -Link Box
| 19***14 | Guard Group-Track Guide; -Rotating Bushing Tracks | 1 |
| 24***23 | Idler Group-Front | 1 |
| 29***86 | Link As-Track Box; -Link Box | 1 |
264-9768 Link As-Track Box -Link Box, Offset
| 23***79 | Link As-Track Box; -Link Box | 17 |
| 23***81 | Link As-Track Box; -Link Box, Offset | 1 |
| 23***99 | Track Link | 34 |
234-9681 Link As-Track Box -Link Box, Offset
| 23***81 | Link As-Track Box; -Link Box, Offset | 1 |
| 23***99 | Track Link | 2 |
| 29***85 | Cartridge As-Track Link | 2 |
231-3714 Link Gp-Track -Systemone
| 23***14 | Link Group-Track; -Systemone | 1 |
| 26***59 | Seal-Football | 2 |
| 2Q***68 | Ring | 1 |
258-2168 Modification Ar-Undercarriage -Systemone
| 21***13 | Seal | 2 |
| 21***25 | Seal | 2 |
| 25***68 | Modification Ar-Undercarriage; -Systemone | 1 |
221-9048 Modification Ar-Undercarriage
| 22***48 | Modification Ar-Undercarriage | 1 |
| 2Q***68 | Ring | 1 |
| 3W***24 | Plate | 2 |
5q-9016 Pivot Bar Gp
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 3 |
| 12***47 | Bearing As-Special | 2 |
| 1H***20 | Seal-O-Ring; (59.92mm Id) | 1 |
211-8111 Pivot Bar Gp -High Temperature
| 21***11 | Pivot Bar Group; -High Temperature | 1 |
130-7362 Pivot Bar Gp
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 3 |
| 12***47 | Bearing As-Special | 2 |
| 13***62 | Pivot Bar Group | 1 |
219-9992 Roller Gp-Track-Double Flange -High Temperature
| 21***92 | Roller Group-Track-Double Flange; -High Temperature | 1 |
288-0935 Roller Gp-Track-Double Flange
| 28***35 | Roller Group-Track-Double Flange; -Heavy-Duty | 1 |
288-0948 Roller Gp-Track-Double Flange -High Heat
| 22***01 | Roller Group-Track-Single Flange; -High Temperature | 1 |
| 28***48 | Roller Group-Track-Double Flange; -High Heat | 1 |
| 6V***45 | Bolt; (M20x2.5x70-mm) | 4 |
120-5766 Roller Gp-Track-Double Flange
| 11***98 | Bushing Assem. | 2 |
| 11***02 | Shaft-Track Roller | 1 |
| 11***48 | Ring-Retaining | 2 |
288-0936 Roller Gp-Track-Double Flange -Tall
| 11***98 | Bushing Assem. | 2 |
| 11***02 | Shaft-Track Roller | 1 |
| 11***48 | Ring-Retaining | 2 |
288-0946 Roller Gp-Track-Double Flange -Cold Weather
| 12***46 | Roller Group-Track-Single Flange | 1 |
| 23***87 | Roller Group-Track-Single Flange; -Heavy-Duty | 1 |
| 28***46 | Roller Group-Track-Double Flange; -Cold Weather | 1 |
125-4176 Roller Gp-Track-Double Flange
| 11***98 | Bushing Assem. | 2 |
| 11***02 | Shaft-Track Roller | 1 |
| 11***48 | Ring-Retaining | 2 |
211-8091 Roller Gp-Track-Double Flange -High Temperature
| 21***91 | Roller Group-Track-Double Flange; -High Temperature | 1 |
231-3088 Roller Gp-Track-Double Flange
| 23***88 | Roller Group-Track-Double Flange; -Heavy-Duty | 1 |
125-4175 Roller Gp-Track-Single Flange
| 11***98 | Bushing Assem. | 2 |
| 11***02 | Shaft-Track Roller | 1 |
| 11***48 | Ring-Retaining | 2 |
211-8092 Roller Gp-Track-Single Flange -High Temperature
| 21***92 | Roller Group-Track-Single Flange; -High Temperature | 1 |
288-0934 Roller Gp-Track-Single Flange
| 20***44 | Seal As | 74 |
| 23***12 | Bushing-Track | 37 |
| 28***34 | Roller Group-Track-Single Flange; -Heavy-Duty | 1 |
288-0945 Roller Gp-Track-Single Flange -Cold Weather
| 17***92 | Link As-Track | 1 |
| 19***79 | Shoe-Track | 36 |
| 1S***60 | Nut-Track; (3/4-16-Thd) | 144 |
120-5746 Roller Gp-Track-Single Flange
| 11***98 | Bushing Assem. | 2 |
| 11***02 | Shaft-Track Roller | 1 |
| 11***48 | Ring-Retaining | 2 |
231-3087 Roller Gp-Track-Single Flange
| 23***87 | Roller Group-Track-Single Flange; -Heavy-Duty | 1 |
220-0001 Roller Gp-Track-Single Flange -High Temperature
| 22***01 | Roller Group-Track-Single Flange; -High Temperature | 1 |
288-0947 Roller Gp-Track-Single Flange -High Heat
| 12***09 | Shoe-Track | 36 |
| 17***92 | Link As-Track | 1 |
| 1S***60 | Nut-Track; (3/4-16-Thd) | 144 |
235-4157 Roller Gp-Track-Single Flange -Systemone
| 23***57 | Roller Group-Track-Single Flange; -Systemone | 1 |
293-9147 Seal & Bushing Gp-Track
| 1S***59 | Bolt 2.15 In. (54.61 mm) Long | 144 |
| 1S***60 | Nut-Track; (3/4-16-Thd) | 144 |
| 23***67 | Link As-Track | 1 |
231-3716 Track Gp -2-Required, Systemone
| 23***14 | Link Group-Track; -Systemone | 1 |
| 23***16 | Track Group; -2-Required, Systemone | 1 |
| 23***99 | Track Link | 2 |
230-6174 Track Gp -2 Required
| 19***22 | Link-Track Master; (Clamp) | 2 |
| 23***74 | Track Group; -2 Required | 1 |
| 23***14 | Link Group-Track; -Systemone | 1 |
191-2405 Track Gp -2-Required
| 19***05 | Track Group; -2-Required | 1 |
| 1Q***09 | Shoe-Track Master | 1 |
| 1Q***10 | Shoe-Track | 36 |
230-6170 Track Gp -2-Required
| 1S***59 | Bolt 2.15 In. (54.61 mm) Long | 144 |
| 1S***60 | Nut-Track; (3/4-16-Thd) | 144 |
| 23***67 | Link As-Track | 1 |
230-6173 Track Gp -2-Required
| 23***73 | Track Group; -2-Required | 1 |
| 23***13 | Shoe-Track | 37 |
| 23***14 | Link Group-Track; -Systemone | 1 |
231-3715 Track Gp -2-Required, Systemone
| 19***22 | Link-Track Master; (Clamp) | 2 |
| 23***13 | Shoe-Track | 36 |
| 23***14 | Link Group-Track; -Systemone | 1 |
288-1541 Track Gp -2-Required, Systemone
| 23***15 | Track Group; -2-Required, Systemone | 2 |
| 25***68 | Modification Ar-Undercarriage; -Systemone | 1 |
| 28***41 | Track Group; -2-Required, Systemone | 1 |
256-4990 Track Gp -2-Required, Systemone
| 12***75 | Roller Group-Track-Single Flange; -Heavy-Duty | 6 |
| 12***76 | Roller Group-Track-Double Flange; -Heavy-Duty | 6 |
| 13***62 | Pivot Bar Group | 1 |
230-6171 Track Gp -2 Required
| 1S***59 | Bolt 2.15 In. (54.61 mm) Long | 144 |
| 1S***60 | Nut-Track; (3/4-16-Thd) | 144 |
| 23***67 | Link As-Track | 1 |
256-4991 Track Gp -2-Required, Systemone
| 21***18 | Guard Group-Track Guide | 1 |
| 23***68 | Idler Group-Front; -Waste Handling | 1 |
| 25***91 | Track Group; -2-Required, Systemone | 1 |
230-6172 Track Gp -2 Required
| 23***72 | Track Group; -2 Required | 1 |
| 23***14 | Link Group-Track; -Systemone | 1 |
| 23***99 | Track Link | 2 |
191-2404 Track Gp -2-Required
| 19***04 | Track Group; -2-Required | 1 |
| 1Q***40 | Shoe-Track | 36 |
| 1Q***41 | Shoe-Track Master | 1 |
283-4653 Undercarriage Ar -Systemone
| 19***75 | Plate; (Rear Port) | 1 |
| 19***79 | Pin; (Vane Holdout) | 10 |
| 19***80 | Vane | 10 |
283-4654 Undercarriage Ar -Systemone
| 10***96 | Pin | 2 |
| 12***20 | Cylinder Group-Ripper; -Lh-Lift | 1 |
| 12***21 | Cylinder Group-Ripper; -Rh-Lift | 1 |
223-8049 Undercarriage Ar -Waste Handling
| 13***21 | Guard Group-Track | 1 |
| 21***83 | Roller Group-Track Carrier; -High Temperature | 2 |
| 21***91 | Roller Group-Track-Double Flange; -High Temperature | 6 |
270-8140 Undercarriage Ar -High Temperature
| 21***18 | Guard Group-Track Guide | 1 |
| 26***24 | Guard Group-Idler; -Systemone | 1 |
| 27***40 | Undercarriage Ar; -High Temperature | 1 |
169-9101 Undercarriage Ar
| 16***01 | Undercarriage Ar | 1 |
| 23***16 | Track Group; -2-Required, Systemone | 2 |
| 25***68 | Modification Ar-Undercarriage; -Systemone | 1 |
282-1555 Undercarriage Ar -Systemone
| 13***56 | Tube As | 1 |
| 13***69 | Hose As | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
257-7059 Undercarriage Ar -Systemone
| 21***65 | Bearing | 2 |
| 21***99 | Cap Group-Track Roller; -Systemone-Fine Grading | 2 |
| 23***38 | Arm & Bearing As-Lift | 1 |
256-2771 Undercarriage Ar -Systemone
| 13***21 | Guard Group-Track | 1 |
| 19***26 | Frame Group-Track Roller | 1 |
| 21***99 | Cap Group-Track Roller; -Systemone-Fine Grading | 12 |
Work Tools
257-1763 Adapter Gp-Tip -Penetration, K-80
| 21***29 | Bucket Group-Multipurpose | 1 |
| 25***63 | Adapter Group-Tip; -Penetration, K-80 | 1 |
| 8V***68 | Lines Group-Bucket; -Multipurpose | 1 |
257-1764 Adapter Gp-Tip -K-90, Long
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 16***72 | Plate-Information; (Multipurpose Bucket) | 1 |
| 25***64 | Adapter Group-Tip; -K-90, Long | 1 |
257-1766 Adapter Gp-Tip -K-80
| 12***57 | Spill Plate | 1 |
| 21***58 | Hinge As | 1 |
| 21***67 | Hinge As | 1 |
3g-3625 Edge Gp-Bit & Cutting
| 26***33 | Edge-Segment | 2 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 14 |
| 3G***25 | Bit & Cutting Edge Group | 1 |
264-3275 Bucket Ar-Multipurpose
| 12***57 | Spill Plate | 1 |
| 25***31 | Hinge As; (Lift, Inner, Rh) | 1 |
| 25***32 | Hinge As; (Lift, Outer, Rh) | 1 |
216-9532 Bucket Ar-Multipurpose
| 12***57 | Spill Plate | 1 |
| 21***32 | Bucket Ar-Multipurpose | 1 |
| 21***58 | Hinge As | 1 |
254-7176 Bucket As-General Purpose -Flush Mounted Teeth
| 14***84 | Bowl As | 1 |
| 21***33 | Bulldozer & Bearing As | 1 |
| 25***76 | Bucket As-General Purpose; -Flush Mounted Teeth | 1 |
254-3229 Bucket As-General Purpose
| 21***54 | Bucket As-General Purpose | 1 |
| 25***29 | Bucket As-General Purpose | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 8 |
217-1454 Bucket As-General Purpose
| 12***57 | Spill Plate | 1 |
| 21***54 | Bucket As-General Purpose | 1 |
| 22***94 | Adapter-Tip; -Flush Mount | 8 |
217-1455 Bucket As-General Purpose -Flush Mounted Teeth
| 21***55 | Bucket As-General Purpose; -Flush Mounted Teeth | 2 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 8 |
| 4F***27 | Bolt-Plow; (3/4-10x57.15mm) | 8 |
217-1452 Bucket Gp-General Purpose -Flush Mounted Teeth
| 14***78 | Hinge | 2 |
| 14***77 | Bar | 4 |
| 21***33 | Bulldozer & Bearing As | 1 |
217-1453 Bucket Gp-General Purpose
| 1U***00 | Edge-Cutting | 2 |
| 21***53 | Bucket Group-General Purpose | 1 |
| 25***62 | Guard; (Corner, Rh)(Corner, Rh) | 1 |
264-3276 Bucket Gp-Multipurpose
| 14***66 | Edge-Segment | 5 |
| 26***76 | Bucket Group-Multipurpose | 1 |
| 30***26 | Edge-Segment | 2 |
216-9529 Bucket Gp-Multipurpose
| 21***29 | Bucket Group-Multipurpose | 1 |
| 25***64 | Guard; (Corner, Rh)(Rh) | 1 |
| 25***65 | Guard; (Corner, Lh)(Lh) | 1 |
264-6234 Edge Gp-Cutting
| 10***92 | Pin | 2 |
| 12***86 | Block As | 2 |
| 26***34 | Edge Group-Cutting | 1 |
8e-5792 Edge Gp-Cutting
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 14 |
| 4F***42 | Bolt 7.62 cm(3 In.) Long | 14 |
| 4T***94 | Edge; (Segment) | 7 |
133-0682 Edge Gp-Cutting -Heavy Duty
| 13***82 | Edge Group-Cutting; -Heavy Duty | 1 |
| 30***25 | Edge-Segment; (190 mm Wide) | 2 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 14 |
8e-5788 Edge Gp-Segment
| 12***87 | Carriage As | 1 |
| 16***77 | Channel As | 1 |
| 16***78 | Channel | 1 |
6y-7239 Edge Gp-Segment
| 12***88 | Ripper Group | 1 |
| 14***91 | Lines Group-Ripper | 1 |
| 4B***58 | Screw (Identification Plate) Mounting | 2 |
8e-6127 Mounting Gp-Ripper
| 22***81 | Tip-Extra-Duty; (K-80) | 8 |
| 22***90 | Retainer-G.E.T. | 8 |
| 25***66 | Adapter Group-Tip; -K-80 | 1 |
157-4981 Ripper Ar
| 15***81 | Ripper Ar | 1 |
| 22***90 | Retainer-G.E.T. | 8 |
| 22***99 | Tip-General Purpose; (K-90) | 8 |
122-6688 Ripper Gp
| 11***58 | Pin; (G.E.T.) | 1 |
| 11***59 | Retainer Assembly; (G.E.T.) | 1 |
| 12***88 | Ripper Group | 1 |
269-4610 Tip Gp -K-80, Extra-Duty
| 11***58 | Pin; (G.E.T.) | 1 |
| 11***59 | Retainer Assembly; (G.E.T.) | 1 |
| 1U***52 | Tip (Long) | 1 |
259-5874 Tip Gp-General Purpose -K-90
| 25***74 | Tip Group-General Purpose; -K-90 | 1 |
| 8J***55 | Tip Group-Long; -J-350 | 8 |
8j-4955 Tip Gp-Long -J-350
| 22***82 | Tip-Penetration; (K-80) | 8 |
| 22***90 | Retainer-G.E.T. | 8 |
| 25***66 | Adapter Group-Tip; -K-80 | 1 |
9j-3167 Tip Gp-Long -J-300
| 8J***54 | Tip Group-Short; -J-350 | 8 |
| 9J***67 | Tip Group-Long; -J-300 | 1 |
8y-9646 Tip Gp-Long
| 11***58 | Pin; (G.E.T.) | 1 |
| 11***59 | Retainer Assembly; (G.E.T.) | 1 |
| 1U***51 | Tips-Short | 1 |
8e-3752 Tip Gp-Long -J-350, Heavy-Duty
| 10***08 | Pin-G.E.T. | 1 |
| 1U***02 | Tip ( Long ) | 1 |
| 8E***52 | Tip Group-Long; -J-350, Heavy-Duty | 1 |
269-4609 Tip Gp-Penetration -K-80
| 10***08 | Pin-G.E.T. | 1 |
| 1U***01 | Tip ( Short ) | 1 |
| 26***09 | Tip Group-Penetration; -K-80 | 1 |
9j-3175 Tip Gp-Short -J-300
| 22***90 | Retainer-G.E.T. | 8 |
| 22***99 | Tip-General Purpose; (K-90) | 8 |
| 22***97 | Adapter-Tip; (K-90, 2-Strap, Center) | 8 |
8y-9766 Tip Gp-Short
| 22***89 | Tip-General Purpose; (K-80) | 8 |
| 22***90 | Retainer-G.E.T. | 8 |
| 25***66 | Adapter Group-Tip; -K-80 | 1 |
8j-4954 Tip Gp-Short -J-350
| 22***90 | Retainer-G.E.T. | 8 |
| 22***92 | Tip-Penetration; (K-90)(K-90) | 8 |
| 22***97 | Adapter-Tip; (K-90, Long, Center) | 6 |
279-8743 Tooth Gp -K-90
| 17***73 | Adapter | 6 |
| 1U***52 | Tip (Long) | 1 |
| 27***43 | Tooth Group; -K-90 | 1 |
269-4606 Tooth Gp -K-80
| 26***06 | Tooth Group; -K-80 | 1 |
| 3G***57 | Adapter | 6 |
| 5P***61 | Bolt-Plow-Center Adapters To Bucket Edge | 12 |
253-0092 Tooth Gp -K-90, Penetration
| 25***92 | Tooth Group; -K-90, Penetration | 1 |
| 3G***08 | Adapter-Strap; (Lh) | 1 |
| 3G***09 | Adapter-Strap; (Rh) | 1 |
133-0685 Tooth Gp-Long -Heavy Duty
| 11***59 | Retainer Assembly; (G.E.T.) | 1 |
| 13***85 | Tooth Group-Long; -Heavy Duty | 1 |
| 13***08 | Pin | 1 |
3g-4013 Tooth Gp-Long
| 17***73 | Adapter | 6 |
| 3G***13 | Tooth Group-Long | 1 |
| 3G***58 | Adapter-Strap L.H. | 1 |
8e-5797 Tooth Gp-Long
| 22***90 | Retainer-G.E.T. | 8 |
| 22***91 | Tip-Extra-Duty; (K-90) | 8 |
| 22***97 | Adapter-Tip; (K-90, Long, Center) | 6 |
233-7151 Tooth Gp-Long -K-90
| 23***51 | Tooth Group-Long; -K-90 | 1 |
| 3G***07 | Adapter-Strap | 6 |
| 3G***08 | Adapter-Strap; (Lh) | 1 |
5q-9456 Tooth Gp-Long
| 22***90 | Retainer-G.E.T. | 8 |
| 22***99 | Tip-General Purpose; (K-90) | 8 |
| 22***97 | Adapter-Tip; (K-90, Long, Center) | 6 |
253-0091 Tooth Gp-Long -K-90
| 17***73 | Adapter | 6 |
| 1U***51 | Tips-Short | 1 |
| 25***91 | Tooth Group-Long; -K-90 | 1 |
3g-0109 Tooth Gp-Ripper -Curved
| 1J***27 | Bolt-Plow; 11.4cm(4.45in)Long | 6 |
| 1U***78 | Tooth (L. H.) | 1 |
| 1U***79 | Tooth (R. H.) | 1 |
3g-4014 Tooth Gp-Short
| 1U***87 | Tooth-Uni | 6 |
| 1U***88 | Tooth (L.H.) | 1 |
| 1U***89 | Tooth-Uni; (Rh) | 1 |
8e-5796 Tooth Gp-Short
| 23***49 | Film-Stripe; (Cat, Lh)(Lh) | 1 |
| 23***50 | Film-Stripe; (Cat, Rh)(Rh) | 1 |
| 23***51 | Film-Stripe; (Corner, Lh) | 1 |
1u-2427 Tooth Gp-Uni
| 15***97 | Film-Identification; (Hydraulic Test Ports) | 1 |
| 17***48 | Film-Identification; (Hydraulic Oil Pressure) | 1 |
| 19***38 | Film; (Warning) (Coolant) (To Right Side Of Radiator Fill Cover) | 1 |
1u-2426 Tooth Gp-Uni
| 1U***26 | Uni-Tooth Group | 1 |
| 23***51 | Film-Stripe; (Corner, Lh) | 1 |
| 23***52 | Film-Stripe; (Corner, Rh) | 1 |
963C serial number reference
The PIN/serial plate on a 963C is a riveted metal tag on the left side of the machine, on the support arm just ahead of the cab; the number is also stamped into the frame near the plate. Pre-2002 units show an 8-character serial made of a 3-character prefix plus a 5-digit sequence (e.g. BBD00123) - the prefix is always the first three characters. 2002-and-later units carry the full 17-character PIN, with the 8-character serial (prefix + sequence) as its last 8 characters.
| Prefix | Identifies | Notes |
|---|---|---|
| 2DS | 963C Track-Type Loader LGP (Low Ground Pressure), early production | Cat 3116 turbocharged diesel. First 963C production series. Factory parts and undercarriage documentation for this prefix is titled specifically for the LGP (wider-track) build, grouped with the later 4TF and 7RP LGP prefixes. Conventional oscillating undercarriage, 203 mm (8.00 in) track pitch, 70.0 mm bushing O.D. Marks the start of 963C output, roughly late 1990s. A standard-gauge (non-LGP) 963C under this same prefix is not documented in sources checked - verify configuration off the full PIN or with your dealer if unsure. |
| BBD | 963C Track-Type Loader, later production, Tier II | Cat 3126B ATAAC diesel, Tier II-certified. Later 963C production run, following the 2DS-prefix machines, carrying through to the end of 963C output. Same conventional undercarriage and track-pitch dimensions as the 2DS series. Roughly 2000 and later. Track gauge (standard vs LGP) isn't distinguished in the documentation found for this prefix - verify off the full PIN or with your dealer if unsure. |
Frequently asked questions
What engine does the Caterpillar 963C use?
The 963C runs a Cat 3126B ATAAC turbocharged-and-aftercooled diesel, roughly 7.2 L, rated near 118 kW (158 hp) at 2000 rpm. Early 2DS-prefix production instead used the Cat 3116 turbocharged diesel, before Cat moved the line to 3126B ATAAC power under BBD-prefix, Tier II-compliant production.
What is the operating weight of the Caterpillar 963C?
Operating weight runs roughly 19.0-19.6 t (about 41,900-43,200 lb), varying with bucket, track shoe width, and standard versus LGP undercarriage - treat this as a range rather than one fixed figure, since it shifts with configuration.
What replaced the Caterpillar 963C?
Caterpillar replaced the 963C with the 963D, which carries a Cat C6.6 ACERT engine and a SystemOne undercarriage while keeping the same twin-track hydrostatic drive concept. The bare "963" name was reused decades later on an unrelated Next Generation Tier 4 Final machine with a Cat C7.1 engine - that later machine is a modern reboot, not a parts-compatible descendant of the 963C.
What 963C owners discuss
What's the most common complaint about the 963C's hydrostatic drive?
Power loss and slow-down under sustained load once transmission oil warms to roughly 60-65 C (140-149 F), typically after 1-2 hours of work. The machine may not recover full travel speed until shut down and restarted. Root cause is usually oil condition or viscosity out of spec, though metal found in the case-drain filter points to drive pump wear instead. Have your dealer run a case-drain flow test before condemning the pump.
Does the 963C use one hydraulic reservoir for both implements and the drive?
Yes. On the 963C, loader (implement) hydraulics and the hydrostatic drive share one common oil supply and reservoir, unlike the earlier 963B, which kept implement and transmission oil separate. Owners note this shared-loop design means a leaking cylinder or dirty implement circuit can carry contamination straight into the drive pump and motors, so oil cleanliness and change intervals matter more on the C series than on the B.
What engine issues come up most for the 963C?
Most 963C units run the Cat 3126B ATAAC (earlier 2DS-prefix machines used the 3116 turbocharged diesel instead). Recurring 3126B complaints: HEUI pump wear leading to excessive injection pressure and injector damage, high-pressure oil line failures that push crankcase oil out and can trigger low-oil shutdowns, and low tolerance for dirty engine oil, which pushes some owners to shorten oil-change intervals below the factory default. Sluggish throttle response from idle after a cylinder head job has also been traced to fuel rack adjustment rather than a HEUI fault.
What undercarriage wear pattern should 963C owners expect?
The track chain is sealed and lubricated, which cuts pin and bushing wear compared with an open chain, but sprocket segments, rollers and idlers still wear with hours like any track machine. Track tension is the variable owners control: too tight and the final drive looks weak and burns extra fuel while idlers and rollers wear early; too loose and the chain can throw or accelerate pin, bushing and sprocket wear. A jumping or slapping noise at the sprocket usually means worn sprocket segments or tension out of spec, so check sag against the service manual figure before assuming a drive motor fault.
What electrical or sensor issues show up on the 963C?
Fault history commonly involves the fuel level sensor, the secondary engine speed/timing sensor, data link communication between modules, and hydrostat pilot-pressure sensors. A charge-pressure alarm paired with one side of the machine driving only in reverse has been traced to a pilot-pressure sensor or a blocked valve rather than pump failure. These are read and cleared with Cat's factory diagnostic software over the machine's data link. Corroded or loose connectors are a frequent root cause worth checking before swapping sensors outright.
Is there anything unusual about the 963C compared to the 963B that a buyer should know?
Owners describe roughly 50 hp more output and a larger bucket than the B series, plus a more comfortable cab with noticeably more electronics to maintain. Opinions are mixed: some feel the B series pulls harder and prefer its simpler, separate-reservoir hydraulic layout, others report being satisfied with the C's added power and cab comfort. Neither view is universal, treat it as configuration and application dependent rather than a flat upgrade.
What should I check before buying a used 963C?
Run a case-drain flow test on the drive pump and motors under load; flow that climbs well above a stable baseline points to internal wear needing a rebuild. Check track sag against spec and look for uneven sprocket or roller wear suggesting the machine ran too tight or too loose for long periods. Because implement and drive oil share one loop on this series, pull a fluid sample and check for cross-contamination, and ask for service records showing regular oil changes given the 3126B's sensitivity to dirty oil. Test hydrostat response both cold and after the machine reaches full operating temperature, since the known slow-down complaint only shows up once it's hot. Safety note: at least one reported case involved a 963C that took off unexpectedly in reverse at full throttle after a hydrostat calibration attempt, so uncommanded movement during calibration is a real risk, not a quirk. Have your dealer verify pump, motor, injection system condition and hydrostat calibration before putting the machine back in service.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 963C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.