Caterpillarchallenger
Caterpillar 95E
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 95E Challenger is a high-horsepower rubber-tracked row-crop and tillage tractor, built 1998-2001 at Caterpillar's DeKalb, Illinois plant as the flagship of the Challenger E-series (65E/75E/85E/95E). It runs a Cat 3196 turbocharged and aftercooled 11.9L (729 cu in) inline-six diesel rated at roughly 410 gross hp (305 kW) at 2100 rpm, with Cat's own claimed PTO rating around 302 hp. Power runs through a 10-speed (10F/2R) full powershift transmission and a hydrostatic differential steering unit into Caterpillar's Mobil-Trac rubber-belted undercarriage; the 95E was offered only as a track machine, not as a wheeled row-crop tractor. Operating weight runs roughly 33,980-35,500 lb (15,410-16,100 kg) depending on ballast and options. Serial prefixes 6KS and 1SM cover the production run. The 95E had no directly numbered predecessor; it was a new addition above the existing 85E/85D (355-370 hp) rather than a straight-line replacement, and after Caterpillar sold the Challenger agricultural business to AGCO in 2002, the high-horsepower tracked segment it occupied continued as AGCO's Challenger MT700-series (an AGCO model line, not a Caterpillar product).
Within the run, the main change was less a generational redesign than a running production update: the shift from the 6KS to the 1SM serial prefix reflects supplier and component running changes rather than a new model. The 95E's real significance was putting the largest engine and pull-power in Cat's Challenger lineup on a rubber-track chassis at a time when track tractors were still proving themselves against wheeled 4WD units. In the used and parts market today, the 95E sits right at the boundary between Caterpillar-supported parts and the AGCO-era Challenger system it fed into, so engine, hydraulic, and electrical components still cross-reference cleanly to Cat's DEO/DEAC/ELC/MTO fluid line, while undercarriage wear parts (tracks, rollers, sprockets, bogie air springs) are the items buyers should budget hardest for as supply thins with age. It remains attractive to large-acreage operators for its pull-to-weight ratio and flotation, and it trades well below current MT700-series pricing for similar drawbar capability.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 95E specifications
Engine
| Engine model | Caterpillar 6-cylinder, turbocharged, intercooled, liquid-cooled diesel |
| Displacement | 12.0 L (729 cu in / 11,945 cc) |
| Bore x Stroke | 130 mm x 150 mm (5.12 in x 5.91 in) |
| Compression ratio | 16.0:1 |
| Gross power | 410 hp (305.7 kW / 415.8 PS) at 2,100 rpm |
| PTO power (rated) | 302 hp (225.2 kW) |
| PTO power (test-measured) | approx. 342 hp (254.9 kW) as measured on a dynamometer test |
| Emissions tier | not documented for this model year range; predates modern Tier emissions labeling |
Weights
| Operating weight | 15,410-16,111 kg (33,980-35,520 lb) - figures vary by source/configuration |
| Ground pressure | not published |
Dimensions
| Overall length | 5.94 m (19 ft 6 in) |
| Overall width | 2.92 m (9 ft 7 in) |
| Overall height | 3.40 m (11 ft 2 in) |
| Wheelbase | 2.71 m (106.7-107.1 in) |
| Track shoe width | 63.5 cm (25 in) |
| Ground clearance | not published |
Performance
| Transmission | Full powershift, 10 forward / 2 reverse gears, electro-hydraulic clutch control |
| Steering | Hydrostatic differential steering |
| Max travel speed (forward) | 28.9 km/h (18 mph) |
| Max travel speed (reverse) | 7.6 km/h (4.7 mph) |
| Drawbar power (test-measured) | approx. 244.4 kW (327.7 hp) |
| PTO speed | 1,000 rpm |
| Brakes | Hydraulic caliper disc |
Service capacities (summary)
| Fuel tank | 1,060 L (280 US gal) |
| Cooling system | 75.7 L (80 US qt) |
| Hydraulic system | Closed-center circuit, approx. 200 bar (2,900 psi), 151.4 L/min (40 US gpm) flow; total reservoir capacity not published |
| Engine oil | not documented in available sources - verify with dealer or operator manual |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
95E fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) — Cat 3196 turbocharged, intercooled diesel | Not consistently documented in available sources for this exact serial range (6KS and up). Verify against the data plate or a dealer parts lookup before servicing. | Cat DEO (Diesel Engine Oil), multigrade diesel engine oil meeting Cat ECF-1 / API CG-4-CH-4. Use SAE 15W-40 for warm ambient conditions; drop to SAE 10W-30 in cold weather per the Cat multigrade viscosity-by-temperature chart. Commercial heavy-duty diesel oil with minimum 900 ppm zinc, API CD/CF-4/CG-4/CH-4, is an acceptable alternate where Cat DEO is unavailable. |
| Cooling system | 75.7 L (80 US qt; 66.6 Imp qt) | Cat DEAC (Diesel Engine Antifreeze/Coolant), mixed to a 50/50 water/glycol ratio and conditioned with the correct level of Supplemental Coolant Additive (SCA) on the standard service interval. Cat ELC (Extended Life Coolant) is the later-approved, SCA-free alternative for this engine family. |
| Fuel tank | 1060 L (280 US gal; 233.2 Imp gal) | No. 1-D or No. 2-D diesel fuel, grade selected by ambient temperature (No. 1-D favored in cold weather for better cold-flow properties). |
| Power train — transmission, hydraulic system, and final drives/differentials (common sump) | Not documented as a separate figure for the 95E in available sources. Caterpillar's Challenger E-series shares a single power-train sump across the powershift transmission, the closed-center hydraulic system, and the final drives/differentials, so no distinct per-compartment capacity is published outside the full OMM lubrication chart — verify the combined system capacity with your dealer or the OMM chart before refilling. | Cat MTO (Multipurpose Tractor Oil), the shared-sump fluid across transmission, hydraulic system, final drives/differentials, and wet brakes/steering clutches on this platform. Cat TDTO (Transmission/Drive Train Oil) is the listed alternate where MTO is not available. |
| Hydraulic system (closed-center, 4-valve) | Shares the common power-train sump above; no separate hydraulic-only fill capacity documented. Pump total flow is rated at 151.4 L/min (40 US gpm) at roughly 2900 psi (200 bar) — a flow-rate spec, not a reservoir capacity. | Cat MTO (Multipurpose Tractor Oil), same fluid as the shared power-train sump; Cat HYDO or TDTO listed as acceptable alternates by Caterpillar's general machine fluids guidance if MTO is unavailable. |
| Grease (chassis and undercarriage points) | n/a — service-point lubrication, no fill capacity. | Cat Multipurpose Grease, NLGI 2 lithium-complex grease, for standard chassis, pin, and bushing grease points. Undercarriage/track-roller points on some crawler-track Cat equipment call for a softer semi-fluid NLGI 0/00 grease — confirm against the OMM lubrication chart before greasing rollers and idlers. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 95E maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the 95E beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S sampling on the 3196 engine oil, the shared MTO transmission-hydraulic-final drive fluid, and coolant on a rolling basis. Rising iron or copper in the MTO sample flags powershift clutch pack or final drive wear before it strands the machine mid-field. Coolant sampling on the 3196's wet-liner block catches cavitation and additive depletion before liner pitting starts. Track fluid seepage from bogie or idler seals is often caught first by a falling roller-oil level, not a visible leak.
Corrective & Common Repairs
Expect Mobil-Trac pin and bushing wear, loosening bogie arm bolts, and bogie air spring failures as the most frequent undercarriage complaints on the 95E. On the powertrain, turbocharger shaft play and worn mechanical unit injectors on the 3196 show up as smoke or power loss. Differential steering response softening usually traces to steering clutch adjustment or worn steering motor components, not the transmission itself.
Overhaul & Rebuild Points
Major rebuild dollars on a 95E go into the undercarriage first: drive sprocket segments, mid-rollers, and front idlers wear as a set and are usually budgeted together. Powershift clutch packs and the torque/steering hydraulic circuit are the next-largest rebuild items, tracked through oil-analysis trending rather than a fixed hour number. Turbocharger overhaul and fuel injector reman on the 3196 round out a typical mid-life rebuild package.
Seasonal & Environment Servicing
Drain the fuel/water separator more often in cold or wet harvest conditions, and use a block heater below freezing to protect the 3196's cold-start behavior. Mobil-Trac tension needs rechecking across big temperature swings since the rubber belt contracts in cold weather and can over-tighten if left at a summer setting. In dusty tillage or harvest work, clean the radiator and A/C condenser core frequently to hold cooling capacity, and verify coolant freeze protection before winter storage.
95E common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1R-0762 | Filter As-Fuel | Fuel system service | Check fitment → |
| 129-0375 | Bowl As-Water Collection | Fuel system service | Check fitment → |
| 133-5673 | Element | Fuel system service | Check fitment → |
| 6I-2505 | Filter Element As-Air | Air intake service | Check fitment → |
| 6I-2506 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
95E fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| E91 | Throttle position sensor circuit fault, signal out of valid range | Faulty or misadjusted throttle/accelerator position sensor, damaged wiring or corroded connector at the sensor | Check sensor wiring and connector for damage or corrosion, verify linkage adjustment, replace sensor if signal stays out of range |
| E94 | Fuel pressure/fuel filter differential sensor fault | Plugged fuel filter, water or contamination in the fuel, or a failed pressure sensor | Check fuel level and filter condition, drain the water separator, replace the filter if due, inspect sensor wiring |
| E100 | Engine oil pressure sensor fault or oil pressure reading outside normal range | Low engine oil level, a failing oil pressure sensor, or a genuine low oil pressure condition | Stop and check engine oil level immediately, inspect sensor wiring and connector, do not keep running on an active low-pressure warning |
| E102 | Boost (intake manifold) pressure sensor fault or reading out of range | Restricted air filter, a leaking or collapsed turbo charge-air hose, or a failed boost pressure sensor | Inspect air filter and intake/charge-air hoses for leaks or restriction, check sensor connector and wiring |
| E105 | Intake manifold air temperature sensor fault | Open or shorted sensor circuit, corroded connector | Check sensor wiring and connector, replace sensor if the reading is implausible |
| E110 | Engine coolant temperature sensor fault or reading out of normal range | Low coolant level, a clogged radiator or cooling grille, or a failed coolant temperature sensor | Check coolant level and radiator/grille condition first, inspect sensor wiring before replacing the sensor |
| E175 | Engine oil temperature sensor fault or reading out of normal range | Cooling system restriction affecting oil cooling, or a failed oil temperature sensor | Check coolant level and radiator condition, inspect the sensor circuit, contact dealer if the fault persists |
| E190 | Engine speed/timing signal fault (crankshaft or engine speed sensor) | Damaged or misadjusted speed/timing sensor, wiring fault, or metal debris fouling the sensor tip | Check sensor air gap and wiring, inspect for debris on the sensor tip, verify connector condition |
| E9131-E9136 | Individual cylinder fuel injector or injector solenoid fault, cylinders 1 through 6 | Failed injector solenoid, a wiring fault at the injector harness, or an ECM driver circuit fault | Use the service diagnostic tool to isolate the affected cylinder, check injector wiring and connector before replacing the injector |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
95E attachments & work tools
Drawbar / pull-scraper hitch
Rear rigid drawbar with heavy-duty hanger support is the primary pulling point for tandem earthmoving scrapers and other pull-type implements on this class of Challenger crawler tractor. A reinforced 4-ear drawbar and modified hanger, pinned close to the tractor with the belly pin, is used for tandem-scraper work and scrapers above roughly 15 cu yd, matching the 95E's 410 hp engine class.
Three-point hitch (optional)
A rear 3-point hitch is offered as an alternative or addition to the drawbar on this Challenger platform. Exact hitch category (2, 3, or 3N) is not documented for this specific serial range in available factory literature; verify pin and lift-arm sizing with your dealer before ordering implements.
Rear PTO (optional)
Independent rear PTO is offered at 1000 rpm output (1000/1.75-in spline type) at roughly 2050 engine rpm. Used for PTO-driven pull-behind implements compatible with high-horsepower track tractors in this class.
Auxiliary hydraulic remotes
Closed-center hydraulic system rated around 2900 psi supplies up to 4 remote valves with total flow near 40 gpm (151 L/min), used to power hydraulically actuated implements such as grain carts, scrapers, and folding field implements.
Undercarriage / rubber track width options
Standard rubber belted track width is 25 in (about 635 mm), with a 30 in (about 762 mm) wide-track option shared across the 65E-95E Challenger family for reduced ground pressure in soft or wet field conditions.
Swinging drawbar option
A swinging drawbar arrangement, allowing several degrees of lateral movement each way with rubber bumper stops, is available on this Challenger series as an alternative to the fixed rigid drawbar, easing turns with towed implements such as wagons and carts.
Scraper-specific hitch kits
Aftermarket and OEM-pattern scraper drawbar kits are built specifically to this Challenger tractor's frame bolt pattern (multiple 7/8 in bolts into the rear frame) to mount open-bowl and elevating pull scrapers; kit selection depends on scraper brand and capacity, not on generic drawbars.
All 95E assemblies by section
Every catalogued assembly group for the Caterpillar 95E. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
136-4883 Aftercooler Gp-Air
| 10***82 | Latch As-Enclosure | 4 |
| 13***83 | Aftercooler Group-Air | 1 |
| 13***19 | Plate-Support | 1 |
143-4800 Air Cleaner Gp
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 14***00 | Air Cleaner Group | 1 |
| 6I***05 | Filter Element As-Air; -Primary | 1 |
136-5097 Air Cleaner Gp
| 13***97 | Air Cleaner Group | 1 |
| 14***07 | Plate As | 1 |
| 14***00 | Air Cleaner Group | 1 |
6i-0153 Dust Ejector Gp
| 5P***97 | Clamp Fumes Disposal | 2 |
| 5P***17 | Hose; 7cm(2.76in) | 0 |
| 6I***53 | Dust Ejector Group | 1 |
136-5107 Extension Gp-Air Cleaner
| 13***57 | Tube As | 1 |
| 13***61 | Clamp | 2 |
| 13***07 | Extension Group-Air Cleaner | 1 |
6i-0138 Extension Gp-Exhaust
| 6I***38 | Extension Group-Exhaust | 1 |
| 6I***39 | Extension-Exhaust | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 1 |
9u-1690 Indicator Gp-Air Filter Change
| 1W***13 | Indicator-Air Filter Service; (Air Filter) | 1 |
| 5L***33 | Fitting (To Air Cleaner) | 1 |
| 9U***90 | Indicator Group-Filter Change | 1 |
142-8124 Lines Gp-Air
| 12***95 | Tube As-Exhaust | 1 |
| 13***34 | Hose | 1 |
| 13***60 | Clamp-Hose | 1 |
136-5104 Lines Gp-Air
| 10***25 | Gasket; (Air Inlet Manifold)(Intake Manifold Inlet) | 1 |
| 12***21 | Elbow | 1 |
| 12***29 | Clamp; (V-Band) | 1 |
117-2688 Manifold Gp-Exhaust
| 10***13 | Gasket | 6 |
| 11***89 | Manifold-Exhaust; (Center) | 1 |
| 11***15 | Stud-Taperlock; (M10x85-mm Oal) | 12 |
116-5405 Manifold Gp-Inlet
| 11***05 | Manifold Group-Inlet | 1 |
| 11***06 | Manifold; (Inlet) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
169-0016 Muffler Gp
| 13***08 | Muffler As | 1 |
| 14***69 | Clamp | 1 |
| 16***16 | Muffler Group | 1 |
136-5109 Muffler Gp
| 13***09 | Muffler Group | 1 |
| 14***69 | Clamp | 1 |
| 16***51 | Muffler As | 1 |
192-2078 Turbocharger Gp
| 19***78 | Turbocharger Group | 1 |
| 19***17 | Turbocharger Group | 1 |
| 1S***95 | Gasket-Turbocharger To Manifold; Gasket Turbocharger To Manifold | 1 |
194-1117 Turbocharger Gp
| 12***53 | Clamp As; (Turbine) | 1 |
| 13***73 | Housing-Turbine | 1 |
| 13***75 | Clamp As; (Service Repair) | 1 |
132-3174 Turbocharger Gp
| 13***74 | Turbocharger Group | 1 |
| 13***94 | Turbocharger Group | 1 |
| 1S***95 | Gasket-Turbocharger To Manifold; Gasket Turbocharger To Manifold | 1 |
135-5394 Turbocharger Gp
| 12***53 | Clamp As; (Turbine) | 1 |
| 13***94 | Turbocharger Group | 1 |
| 13***72 | Cartridge Group-Turbocharger | 1 |
Basic Engine
180-1647 Air Compressor Gp -Trailer Brakes
| 14***54 | Seal-O-Ring | 1 |
| 15***76 | Washer; (Contact) | 4 |
| 15***77 | Washer | 4 |
119-3744 Camshaft Gp
| 11***59 | Cover | 1 |
| 11***44 | Camshaft Group | 1 |
| 12***11 | Journal | 1 |
115-2985 Cover Gp-Cylinder Block
| 11***85 | Cover Group-Cylinder Block | 1 |
| 4P***87 | Cover | 1 |
| 6V***50 | Seal-O-Ring (Id=39.34mm) | 1 |
122-0761 Cover Gp-Front Housing
| 06***55 | Seal-O-Ring (Id=47.22mm) | 3 |
| 12***61 | Cover Group-Front Housing | 1 |
| 6V***40 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 2 |
136-4307 Cover Gp-Front Housing
| 13***07 | Cover Group-Front Housing; -Hydraulic Pump Drive | 1 |
| 1H***39 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 1 |
| 4P***50 | Cover | 1 |
117-2744 Crankshaft Gp
| 11***44 | Crankshaft Group | 1 |
| 12***82 | Bearing-Main; (0.51-mm Us)(.51mm U.S.) | 0 |
| 12***83 | Bearing-Main; (0.76-mm Us)(.76mm U.S.) | 0 |
128-0407 Cylinder Block As
| 11***66 | Cap; (Bearing) | 7 |
| 12***07 | Cylinder Block As | 1 |
| 12***16 | Bearing; (Sleeve) | 5 |
148-2062 Cylinder Block As
| 11***66 | Cap; (Bearing) | 7 |
| 12***16 | Bearing; (Sleeve) | 5 |
| 12***17 | Bearing-Sleeve; (Narrow) | 1 |
144-2970 Cylinder Block As
| 10***60 | Seal; (Liner) | 6 |
| 12***07 | Cylinder Block As | 1 |
| 14***70 | Cylinder Block As | 1 |
148-2096 Cylinder Block As
| 10***60 | Seal; (Liner) | 6 |
| 14***62 | Cylinder Block As | 1 |
| 14***96 | Cylinder Block As | 1 |
204-3449 Cylinder Block As
| 10***60 | Seal; (Liner) | 6 |
| 16***63 | Shim-Liner; -Cylinder | 0 |
| 16***64 | Shim-Liner; -Cylinder | 0 |
200-2054 Cylinder Block As
| 11***66 | Cap; (Bearing) | 7 |
| 17***54 | Bolt-Hex Head; (M16x160mm) | 14 |
| 20***54 | Cylinder Block As | 1 |
115-2983 Cylinder Block Gp
| 11***83 | Cylinder Block Group | 1 |
| 14***96 | Cylinder Block As | 1 |
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
144-2950 Cylinder Head As
| 11***02 | Sleeve; (Injector) | 6 |
| 13***97 | Insert-Valve Seat; (Exhaust) | 12 |
| 13***06 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
148-2150 Cylinder Head As
| 11***02 | Sleeve; (Injector) | 6 |
| 13***97 | Insert-Valve Seat; (Exhaust) | 12 |
| 13***06 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
144-2968 Cylinder Head As
| 10***50 | Guide-Valve; (Standard) | 24 |
| 14***50 | Cylinder Head As | 1 |
| 14***68 | Cylinder Head As | 1 |
179-9462 Cylinder Head As
| 10***50 | Guide-Valve; (Standard) | 24 |
| 17***59 | Cylinder Head As | 1 |
| 17***62 | Cylinder Head As | 1 |
179-9459 Cylinder Head As
| 11***02 | Sleeve; (Injector) | 6 |
| 13***06 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
| 14***52 | Insert-Valve Seat; (0.508-mm Os Od)(0.508-mm Os Od) | 12 |
148-2149 Cylinder Head Gp
| 10***50 | Guide-Valve; (Standard) | 24 |
| 10***34 | Guide-Valve; (0.127-mm Os Od) | 0 |
| 10***35 | Guide-Valve; (0.508-mm Os Od) | 0 |
116-1085 Cylinder Head Gp
| 11***85 | Cylinder Head Group | 1 |
| 14***67 | Cylinder Head Group | 1 |
| 16***86 | Gasket As-Cylinder Head | 1 |
144-2967 Cylinder Head Gp
| 10***50 | Guide-Valve; (Standard) | 24 |
| 12***93 | Valve-Exhaust | 12 |
| 14***50 | Cylinder Head As | 1 |
117-2766 Damper Gp
| 11***66 | Damper Group | 1 |
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 8 |
| 16***25 | Damper Assem. | 1 |
136-4562 Drive Gp-Fan
| 13***62 | Drive Group-Fan | 1 |
| 13***22 | Bracket As-Fan | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 4 |
116-1083 Fastener Gp-Cylinder Head
| 11***83 | Fastener Group-Cylinder Head; (Cylinder Head) | 1 |
| 12***84 | Bolt; (Hex Head) (M16x2x160mm) | 26 |
| 2S***58 | Washer-Hard; (17x29x3-mm Thk)(Engine Brake) | 26 |
117-2771 Fastener Gp-Damper & Pulley
| 11***71 | Fastener Group-Damper & Pulley | 1 |
| 21***85 | Spacer; (10.5-mm Thk) | 1 |
| 8T***81 | Bolt; (M16x2.0x80mm) | 6 |
138-2539 Fastener Gp-Front Housing
| 13***39 | Fastener Group-Front Housing | 1 |
| 6V***49 | Nut-Hard; (M12 X 1.75) | 2 |
| 7D***49 | Washer (Flywheel Counter Balance Weight) | 2 |
117-2792 Fastener Gp-Oil Cooler -Engine
| 11***92 | Fastener Group-Oil Cooler; -Engine | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 1 |
| 9M***74 | Washer-Hard; (8.8x16x2-mm Thk)(Hard) | 1 |
102-3596 Flywheel Gp
| 10***96 | Flywheel Group | 1 |
| 16***24 | Flywheel As | 1 |
| 4N***14 | Gear; (113-Teeth)(Flywheel Starter) | 1 |
117-2750 Gear Gp-Front
| 11***50 | Gear Group-Front | 1 |
| 13***83 | Shaft | 1 |
| 13***86 | Gear As; (Idler) (71 Teeth) | 1 |
117-2775 Housing Gp-Flywheel
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 11***75 | Housing Group-Flywheel | 1 |
| 14***73 | Housing-Flywheel, Threaded Tie-Rod, Threaded Tie-Rod; Replaces 421694a1 | 1 |
115-3006 Housing Gp-Front
| 11***06 | Housing Group-Front; (Front) | 1 |
| 11***24 | Gear; (Pump Drive) (34 Teeth) | 1 |
| 13***96 | Housing As; (Front) | 1 |
148-2063 Lifter Gp-Valve -Mechanism
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 2 |
| 12***93 | Dowel | 1 |
| 14***63 | Lifter Group-Valve; -Mechanism | 1 |
115-9386 Lifter Gp-Valve -Mechanism
| 0T***00 | Plug (.5625" Diameter) | 2 |
| 11***86 | Lifter Group-Valve; -Mechanism | 1 |
| 11***91 | Shaft As; (Lifter) | 1 |
117-2748 Lifting Gp-Engine
| 11***05 | Plate; (Lifting Eye) | 2 |
| 11***48 | Lifting Group-Engine | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
137-4982 Mounting Gp-Alternator
| 11***19 | Bracket | 1 |
| 13***42 | Bracket | 1 |
| 13***81 | Bracket | 1 |
148-6726 Mounting Gp-Engine
| 13***78 | Bracket As | 1 |
| 14***26 | Mounting Group-Engine | 1 |
| 16***88 | Angle-Support | 2 |
138-2550 Mounting Gp-Fan Drive
| 12***64 | Stud; (M12x1.75x86.3-mm Oal) | 2 |
| 13***50 | Mounting Group-Fan Drive; (Short) | 1 |
| 5R***37 | Washer; (Seal) (1.27mm Thk) | 2 |
125-8115 Mounting Gp-Fan Drive
| 12***15 | Mounting Group-Fan Drive | 1 |
| 12***16 | Plate As | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 4 |
115-9376 Mounting Gp-Refrigerant Compr
| 11***76 | Mounting Group-Refrigerant Compr | 1 |
132-3183 Mounting Gp-Valve Mechanism
| 11***83 | Fastener Group-Cylinder Head; (Cylinder Head) | 1 |
| 13***83 | Mounting Group-Valve Mechanism | 1 |
| 13***27 | Cover As-Valve Mechanism | 3 |
126-0144 Pan Gp-Oil -Engine
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 2 |
| 10***08 | Gasket; (Oil Pan) | 1 |
| 12***57 | Bell As; (Suction) | 1 |
117-2673 Piston & Rod Gp
| 11***99 | Plug-Pin | 2 |
| 11***16 | Rod Assem. | 1 |
| 11***89 | Bearing-Connecting Rod; (Standard) | 1 |
197-9252 Piston & Rod Gp
| 11***99 | Plug-Pin | 2 |
| 11***16 | Rod Assem. | 1 |
| 11***72 | Bearing-Connecting Rod | 1 |
138-2028 Plug Gp-Cylinder Block
| 13***28 | Plug Group-Cylinder Block | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
117-0185 Plug Gp-Cylinder Block
| 11***85 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
| 9S***06 | Plug (Front 5 Stem Main Control Valve) | 1 |
117-0165 Plug Gp-Cylinder Block
| 11***65 | Plug Group-Cylinder Block; -Oil Gallery, End | 1 |
| 3B***23 | Core Plug--Flywheel Housing Pinion Shaft Hole | 1 |
116-5452 Plug Gp-Front Housing
| 11***52 | Plug Group-Front Housing; (Front Housing) | 1 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
| 9S***05 | Plug-O-Ring; (Straight Thread O-Ring) | 1 |
134-0788 Pulley Gp-Alternator
| 13***88 | Pulley Group-Alternator | 1 |
| 16***31 | Adapter-Fan | 1 |
| 17***99 | Pulley-Fan | 1 |
100-4384 Pulley Gp-Auxiliary Drive
| 10***84 | Pulley Group-Auxiliary Drive | 1 |
| 10***13 | Pulley-Crankshaft | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 6 |
138-2579 Pulley Gp-Crankshaft
| 13***95 | Pulley-Crankshaft | 1 |
| 13***79 | Pulley Group-Crankshaft | 1 |
7e-9583 Pulley Gp-Fan Drive
| 13***80 | Pulley | 1 |
| 4N***30 | Vee Belt | 1 |
| 7E***82 | Pulley-Fan Drive; (3-Groove) | 1 |
115-9397 Rocker Arm Gp
| 09***14 | Pin; (Spring) | 1 |
| 11***97 | Rocker Arm Group | 1 |
| 11***98 | Arm; (Valve Rocker) (Exhaust) | 2 |
116-1091 Seal Gp-Crankshaft
| 10***80 | Seal-O-Ring (Id=177.17mm) | 1 |
| 11***91 | Seal Group-Crankshaft; -Single Lip | 1 |
| 16***23 | Cover | 1 |
7e-7673 Support Gp-Engine
| 13***30 | Support As-Front | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
| 6V***36 | Bolt; (M12x1.75x70-mm) | 8 |
117-2749 Valve Mechanism Gp -Engine
| 10***42 | Base-Valve Mechanism Cover | 1 |
| 10***67 | Pushrod; (Valve) | 12 |
| 10***68 | Pushrod-Injector | 6 |
Braking System
8r-0753 Brake Gp-Caliper
| 1A***58 | Bolt 1.75 In. (44.45 mm) Long | 8 |
| 3V***97 | Bolt; (3/8-16x1-In) | 4 |
| 4V***50 | Seal-Rectangular | 3 |
3w-5071 Brake Gp-Parking
| 0S***73 | Bolt 50.80 mm(2 In.) Long | 2 |
| 1F***50 | Nut Rops Support | 2 |
| 3J***91 | Spring | 1 |
136-4398 Accumulator Gp-Brake
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***36 | Protector-Gas Valve | 1 |
| 11***00 | Kit-Service; (Brake Accumulator) | 1 |
131-5007 Accumulator Gp-Brake
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***36 | Protector-Gas Valve | 1 |
| 11***00 | Kit-Service; (Brake Accumulator) | 1 |
198-0873 Brake & Mtg Gp-Service -Brake Steering
| 19***73 | Brake & Mtg Group-Service; -Brake Steering | 1 |
| 19***74 | Disc | 2 |
| 19***75 | Bracket | 4 |
180-1652 Brake Ar-Trailer
| 12***24 | Clamp | 4 |
| 14***82 | Conduit | 1 |
| 14***73 | Bolt | 2 |
8r-8471 Brake Gp
| 1H***34 | Ring-Retaining; (External) | 1 |
| 3B***01 | Pin,Cotter Bolt | 4 |
| 3W***09 | Rod | 2 |
153-2384 Control Gp-Clutch & Brake
| 10***48 | Cable As | 1 |
| 15***84 | Control Group-Clutch & Brake | 1 |
| 1A***21 | Grommet | 1 |
148-3573 Kit-Brake Repair
| 14***73 | Kit-Brake Repair | 1 |
148-3555 Lines Gp-Brake
| 10***73 | Clip | 3 |
| 13***07 | Accumulator Group-Brake | 1 |
| 14***60 | Valve Group-Brake | 1 |
180-1648 Pump & Valve Gp-Brake -Trailer
| 15***76 | Washer; (Contact) | 3 |
| 18***48 | Pump & Valve Group-Brake; -Trailer | 1 |
| 18***22 | Pump; (Antifreeze) | 1 |
180-1649 Tank Gp-Air -Trailer Brakes
| 14***91 | Seal-O-Ring | 2 |
| 15***77 | Washer | 2 |
| 15***26 | Plug-Locking | 1 |
145-9560 Valve Gp-Brake
| 06***34 | Filter Element-Oil; (Brake Valve) | 1 |
| 14***60 | Valve Group-Brake | 1 |
| 14***73 | Kit-Brake Repair | 1 |
Cooling System
115-2990 Cooler Gp-Engine Oil
| 06***40 | Seal-O-Ring (Id=37.69mm) | 2 |
| 10***25 | Gasket | 1 |
| 11***90 | Cooler Group-Engine Oil; (Engine Oil) | 1 |
136-4951 Cooler Gp-Oil
| 10***43 | Seal; (32-cm Each) | 0 |
| 13***14 | Guard | 1 |
| 13***51 | Cooler Group-Oil | 1 |
136-4881 Cooling Gp-Supplemental
| 13***81 | Cooling Group-Supplemental | 1 |
| 14***08 | Bracket As | 1 |
| 14***09 | Strap As | 2 |
136-4902 Fan Gp-Suction
| 13***02 | Fan Group-Suction | 1 |
| 13***04 | Shield-Fan Blast | 1 |
| 13***79 | Guard As-Fan Lh | 1 |
116-5456 Housing & Regulator Gp -Engine Coolant Temperature
| 11***56 | Housing & Regulator Group; -Engine Coolant Temperature | 1 |
| 11***00 | Housing As-Regulator | 1 |
| 12***11 | Stud; (M8x1.25-Thd)(M8x1.25 Thd Both Ends) | 4 |
117-2778 Lines Gp-Water -Water Pump Inlet Elbow
| 10***35 | Gasket | 1 |
| 10***85 | Elbow; (Water Pump) | 1 |
| 11***78 | Lines Group-Water; -Water Pump Inlet Elbow | 1 |
116-5460 Lines Gp-Water -Bypass
| 10***08 | Flange | 1 |
| 10***95 | Tube | 1 |
| 11***60 | Lines Group-Water; -Bypass | 1 |
117-2783 Lines Gp-Water -Single Thermostat
| 11***56 | Housing & Regulator Group; -Engine Coolant Temperature | 1 |
| 11***83 | Lines Group-Water; -Single Thermostat | 1 |
| 11***97 | Gasket | 4 |
136-4890 Mounting Gp-Radiator
| 11***21 | Seal; (139cm) | 0 |
| 13***90 | Mounting Group-Radiator | 1 |
| 13***99 | Shroud As-Fan | 1 |
117-2789 Plug Gp-Water Lines
| 11***89 | Plug Group-Water Lines; -Engine Oil Cooler | 1 |
| 6V***27 | Seal-O-Ring (Id=8.92mm) | 1 |
| 8T***67 | Plug-Pipe; (Oil Cooler Bonnet Drain) | 1 |
117-2674 Pump Gp-Water
| 11***74 | Pump Group-Water | 1 |
| 15***53 | Pump Group-Water; (Water) | 1 |
| 6V***21 | Bolt; (M8x1.25x80-mm) | 2 |
153-8053 Pump Gp-Water
| 10***09 | Impeller; (Pump) | 1 |
| 10***10 | Gasket | 1 |
| 10***12 | Shaft; (Water Pump) | 1 |
176-7000 Pump Gp-Water
| 10***10 | Gasket | 1 |
| 14***88 | Seal As; (Water Pump) | 1 |
| 17***95 | Cover-Pump | 1 |
136-4888 Radiator Gp
| 13***84 | Tank Group-Coolant | 1 |
| 13***88 | Radiator Group | 1 |
| 13***70 | Channel As | 1 |
136-4884 Tank Gp-Coolant
| 13***84 | Tank Group-Coolant | 1 |
| 13***68 | Tank As-Radiator | 1 |
| 14***52 | Cap-Radiator | 1 |
Differential Steering System
9t-1823 Valve & Mounting Gp
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 4 |
| 4D***97 | Seal 15.6 mm(.614 In.) I.D. | 2 |
| 6D***53 | Pin (Spring) | 1 |
136-5515 Control Gp-Steering
| 13***15 | Control Group-Steering | 1 |
| 1F***50 | Nut Rops Support | 2 |
| 21***15 | Kit-Lever | 1 |
148-7024 Control Gp-Steering
| 13***62 | Valve Group-Steering | 1 |
| 13***54 | Hose As | 1 |
| 13***70 | Bracket As | 1 |
198-0885 Control Gp-Steering -Brake
| 14***83 | Rod End-Yoke | 2 |
| 14***84 | Pin | 2 |
| 15***40 | Pin-Cotter | 2 |
134-6534 Lines Gp-Pump
| 10***13 | Valve-Check; (Differential Back Pressure) | 1 |
| 10***97 | Hose As | 1 |
| 11***52 | Tube As | 1 |
148-7254 Lines Gp-Steering
| 10***01 | Angle As | 1 |
| 10***17 | Hose As | 1 |
| 10***11 | Tee-O-Ring | 1 |
198-0892 Lines Gp-Steering -Brake
| 14***80 | Clamp | 3 |
| 14***81 | Block | 3 |
| 15***35 | Clamp-Hose | 1 |
129-1658 Motor Gp-Piston -Steering
| 11***50 | Housing | 1 |
| 11***62 | Head | 1 |
| 12***58 | Motor Group-Piston; -Steering | 1 |
159-7152 Motor Gp-Piston
| 11***50 | Housing | 1 |
| 11***62 | Head | 1 |
| 15***52 | Motor Group-Piston | 1 |
101-0858 Motor Gp-Piston
| 10***58 | Motor Group-Piston | 1 |
| 11***44 | Rotating Group-Motor | 1 |
| 11***50 | Housing | 1 |
159-7151 Motor Gp-Piston -Steering
| 11***50 | Housing | 1 |
| 11***62 | Head | 1 |
| 15***51 | Motor Group-Piston; -Steering | 1 |
135-2853 Planetary Gp-Differential Ster
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 5 |
| 03***53 | Ring-Retaining | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 8 |
136-4362 Pump & Mtg Gp-Steering
| 12***14 | Pump Group-Gear | 1 |
| 13***62 | Pump & Mtg Group-Steering | 1 |
| 13***70 | Pump Group-Steering | 1 |
121-7514 Pump Gp-Gear
| 12***14 | Pump Group-Gear | 1 |
| 13***51 | Plate-Gear | 1 |
| 13***52 | Flange As | 1 |
156-0928 Pump Gp-Piston
| 07***53 | Pin; (Spring) | 2 |
| 09***39 | Washer; (8.33x15x2.12-mm Thk) | 1 |
| 10***96 | Kit-Manifold | 1 |
198-0915 Pump Gp-Piston
| 07***53 | Pin; (Spring) | 2 |
| 09***39 | Washer; (8.33x15x2.12-mm Thk) | 1 |
| 10***96 | Kit-Manifold | 1 |
137-2670 Pump Gp-Steering
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 09***39 | Washer; (8.33x15x2.12-mm Thk) | 1 |
180-0458 Rotating Gp-Motor
| 11***46 | Valve Group-Flushing; -Differential Steering Motor | 1 |
| 11***87 | Barrel | 1 |
| 11***17 | Screw; (M6x1x16-mm) | 7 |
111-7344 Rotating Gp-Motor
| 11***44 | Rotating Group-Motor | 1 |
| 11***46 | Valve Group-Flushing; -Differential Steering Motor | 1 |
| 11***84 | Shaft-Drive | 1 |
166-7405 Rotating Gp-Motor
| 11***17 | Screw; (M6x1x16-mm) | 7 |
| 12***99 | Plate-Retaining | 1 |
| 13***40 | Valve Group-Flushing | 1 |
133-8738 Rotating Gp-Motor
| 11***84 | Shaft-Drive | 1 |
| 11***17 | Screw; (M6x1x16-mm) | 7 |
| 12***99 | Plate-Retaining | 1 |
198-0872 Steering Ar -Brake
| 19***72 | Steering Ar; -Brake | 1 |
| 19***73 | Brake & Mtg Group-Service; -Brake Steering | 1 |
| 19***85 | Control Group-Steering; -Brake | 1 |
136-4373 Steering Ar-Hydraulic
| 11***64 | Motor & Mounting Group | 1 |
| 13***73 | Steering Ar-Hydraulic | 1 |
| 14***54 | Lines Group-Steering | 1 |
136-4371 Steering Ar-Standard
| 13***48 | Motor & Mounting Group; -Steering | 1 |
| 13***71 | Steering Ar-Standard | 1 |
| 14***54 | Lines Group-Steering | 1 |
161-1082 Valve Gp-Check
| 00***14 | Coupling-Pipe | 1 |
| 16***82 | Valve Group-Check | 1 |
| 16***38 | Valve-Check | 1 |
111-7346 Valve Gp-Flushing
| 11***46 | Valve Group-Flushing; -Differential Steering Motor | 1 |
| 11***88 | Plate | 1 |
| 11***89 | Rod | 1 |
133-8740 Valve Gp-Flushing
| 11***10 | Retainer | 2 |
| 13***40 | Valve Group-Flushing | 1 |
| 6E***02 | Spring | 2 |
135-7462 Valve Gp-Steering
| 09***19 | Ring-Retaining | 1 |
| 12***28 | Slug | 1 |
| 13***62 | Valve Group-Steering | 1 |
Drawbar, Three Point Hitch And Pto
7t-3000 Drive Gp-Power Take-Off
| 0L***58 | Bolt 8.26cm (3.25 In.) Long | 1 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
3w-5101 Shaft Gp-Power Take-Off
| 05***22 | Seal | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 16 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
3w-5023 Frame Gp-Drawbar
| 12***42 | Plate-Wear | 1 |
| 3W***23 | Support Group-Drawbar | 1 |
| 3W***25 | Support As | 1 |
9w-0664 Valve Gp-Modulating
| 6T***39 | Valve Group-Modulating | 1 |
| 8M***35 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 8M***43 | Seal (1.734" Inside Diameter) | 1 |
6t-4739 Valve Gp-Modulating
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 2 |
| 1P***66 | Cover | 1 |
136-5410 Adapter Gp-3 Point Hitch
| 13***10 | Adapter Group-3 Point Hitch | 1 |
| 14***11 | Hose As | 1 |
| 15***46 | Valve Group-Shuttle; (Signal) | 1 |
113-7273 Adapter Gp-Power Take-Off
| 0S***73 | Bolt (102mm Long); (1/2-13x4-In) | 1 |
| 10***01 | Angle As | 1 |
| 11***73 | Adapter Group-Power Take-Off | 1 |
132-4654 Bracket Gp-Shipping
| 13***53 | Plate | 1 |
| 13***54 | Bracket Group-Shipping | 1 |
| 6S***24 | Plug-Protective | 8 |
146-4348 Coupler Gp
| 14***48 | Coupler Group | 1 |
| 14***49 | Body As | 2 |
| 14***50 | Seal | 2 |
197-0486 Coupling Ar -Hydraulic Power Beyond
| 18***61 | Coupling Group | 1 |
| 19***86 | Coupling Ar; -Hydraulic Power Beyond | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
197-0485 Coupling Ar -Hydraulic Power Beyond
| 18***61 | Coupling Group | 1 |
| 19***85 | Coupling Ar; -Hydraulic Power Beyond | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
9u-1695 Drawbar Gp-Swinging
| 11***04 | Plate | 1 |
| 12***70 | Drawbar As | 1 |
| 13***29 | Retainer As | 1 |
198-6814 Hitch Ar
| 18***55 | Guard Group-Belt | 1 |
| 19***14 | Hitch Ar | 1 |
| 8C***13 | Washer-Hard; (24x41.5x4-mm Thk) | 16 |
161-9159 Hitch Ready Ar
| 13***54 | Bracket Group-Shipping | 1 |
| 13***10 | Adapter Group-3 Point Hitch | 1 |
| 13***75 | Guard Group-Rear | 1 |
161-9160 Hitch Ready Ar
| 13***54 | Bracket Group-Shipping | 1 |
| 13***07 | Sensor Group-Speed | 1 |
| 13***75 | Guard Group-Rear | 1 |
157-3866 Hitch Ready Ar
| 13***54 | Bracket Group-Shipping | 1 |
| 13***10 | Adapter Group-3 Point Hitch | 1 |
| 13***75 | Guard Group-Rear | 1 |
154-1972 Kit-Power Take-Off
| 11***70 | Control Group-Power Take-Off | 1 |
| 11***71 | Mounting Group-Power Take-Off | 1 |
| 14***08 | Film-Instruction | 1 |
149-1457 Lines Gp-Power Take-Off
| 14***57 | Lines Group-Power Take-Off | 1 |
| 14***58 | Tube As | 1 |
| 15***84 | Hose As | 1 |
113-7271 Mounting Gp-Power Take-Off
| 06***54 | Tubing | 1 |
| 10***73 | Support | 1 |
| 10***74 | Guard As | 1 |
136-5524 Power Take-Off Ar
| 11***70 | Control Group-Power Take-Off | 1 |
| 11***71 | Mounting Group-Power Take-Off | 1 |
| 13***22 | Transmission Ar; -With Power Take-Off | 1 |
147-9435 Power Take-Off Gp
| 13***12 | Case-Power Take-Off | 1 |
| 14***30 | Gear-Transfer; (20-Teeth) | 1 |
| 14***31 | Gear-Idler; (32-Teeth) | 1 |
211-7920 Shield Gp -Power Take-Off
| 17***45 | Film-Notice; (Rotating Drive Lines) | 2 |
| 19***04 | Shield As; (Italian Market) | 1 |
| 19***55 | Shield As; (Zuidberg Market) | 1 |
Electrical And Starting System
3e-7584 Lamp Gp-Head & Signal
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
3e-7585 Lamp Gp-Head & Signal
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***49 | Lens As; (Headlight) | 1 |
251-1134 Alarm Gp -Track Recoil
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
225-1254 Alarm Gp
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***77 | Splice-Wire | 1 |
136-4564 Alternator Gp-Charging
| 12***97 | Alternator Group-Charging; -12-Volt, 145-Ampere | 1 |
| 13***64 | Alternator Group-Charging | 1 |
| 14***09 | Guard As-Alternator | 1 |
125-9597 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 3 |
| 12***97 | Alternator Group-Charging; -12-Volt, 145-Ampere | 1 |
| 12***68 | Kit-Alternator Guard | 1 |
157-2731 Battery & Wiring Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***21 | Battery Group | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
124-2674 Connection Gp-Electrical
| 12***74 | Connection Group-Electrical; -Ground | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
| 6V***64 | Washer-Hard; (8.8x25.5x5-mm Thk) | 1 |
124-2673 Control & Mtg Gp-Engine Elek
| 11***55 | Control Group-Engine Electronic; (Engine Electronic) | 1 |
| 12***73 | Control & Mtg Group-Engine Elek; (Engine Elek) | 1 |
| 5P***70 | Nut-Hard; (M8 X 1.25) | 1 |
107-3578 Control Gp-Electronic
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***78 | Control Group-Electronic | 1 |
| 3E***88 | Receptacle As-Connector; (8-Pin) | 1 |
115-3055 Control Gp-Engine Electronic
| 11***55 | Control Group-Engine Electronic; (Engine Electronic) | 1 |
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
113-7270 Control Gp-Power Take-Off
| 11***70 | Control Group-Power Take-Off | 1 |
| 1P***16 | Seal-O-Ring; (11.63mm Id) | 1 |
| 2D***35 | Locknut (Visor To Bracket) | 1 |
117-2763 Harness As-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
| 11***63 | Harness As-Engine; -Electronic Control | 1 |
155-0044 Harness As-Radio -Adapter
| 15***44 | Harness As-Radio; -Adapter | 1 |
136-5589 Harness Gp-Chassis
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***89 | Harness Group-Chassis | 1 |
136-5576 Harness Gp-Console
| 11***90 | Fuse; (10 Amp) | 7 |
| 11***91 | Fuse; (15-Ampere) | 2 |
| 11***92 | Fuse; (20 Amp) | 3 |
136-5575 Harness Gp-Dash
| 11***90 | Fuse; (10 Amp) | 14 |
| 11***91 | Fuse; (15-Ampere) | 8 |
| 11***92 | Fuse; (20 Amp) | 5 |
154-7246 Heater Gp-Jacket Water
| 12***09 | Cord As-Heater Element; -240-Volt | 1 |
| 13***17 | Cap As-Dust | 1 |
| 15***81 | Element As-Jacket Water Heater; (240-Volt, 1250-Watt) | 1 |
131-8126 Heater Gp-Jacket Water
| 13***26 | Heater Group-Jacket Water; -120 Volt | 1 |
| 13***27 | Element As-Jacket Water Heater; (120-Volt, 1250-Watt) | 1 |
| 13***17 | Cap As-Dust | 1 |
128-4098 Kit-Connector
| 12***98 | Kit-Connector | 1 |
8t-8652 Kit-Implement Status Switch
| 1H***38 | Lockwasher, External Tooth (1/4); W/O Freespool Qty Is 6 | 2 |
| 3B***02 | Washer,Lock Circuit Breaker Uoc:Bsv,Bsx | 2 |
| 3T***48 | Clip Assembly - Housing Plug To Housing Recp. | 2 |
199-2797 Lamp Gp -Roading
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 19***97 | Lamp Group; -Roading | 1 |
155-0014 Lamp Gp -Turn/Marker
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***14 | Lamp Group; -Turn/Marker | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
3e-7301 Lamp Gp-Dome -With Switch
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 3E***01 | Lamp Group-Dome; -With Switch | 1 |
9x-7779 Lamp Gp-Flood -Roading Lights
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
| 10***53 | Lens As; (Floodlight) | 1 |
9x-9484 Lamp Gp-Flood -Roading Lights
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
140-2719 Lamp Gp-Head
| 14***19 | Lamp Group-Head | 1 |
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
136-5402 Lamp Gp-Tail -Lh
| 13***02 | Lamp Group-Tail; -Lh | 1 |
| 16***76 | Lamp | 1 |
| 9W***26 | Lamp; (12-Volt, 21-Watt)(Roading Lights) | 2 |
136-5403 Lamp Gp-Tail -Rh
160-9941 Lamp Gp-Warning Beacon
| 12***78 | Washer; (16x38x5-mm Thk) | 2 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 2 |
| 16***41 | Lamp Group-Warning Beacon | 1 |
128-6985 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 9R***42 | Plug As | 1 |
| 9R***58 | Cord As | 1 |
199-7127 Lighting Gp -Roading
| 14***35 | Strap-Tie | 20 |
| 15***77 | Washer | 2 |
| 15***78 | Washer | 4 |
157-2727 Lighting Gp-Roading
| 15***27 | Lighting Group-Roading | 1 |
| 3E***85 | Lamp Group-Head & Turn | 2 |
| 7K***81 | Strap-Pressure & Return Hoses To | 2 |
157-2726 Lighting Gp-Roading
| 11***86 | Lamp; (12-Volt, 50-Watt) | 3 |
| 12***62 | Harness As; (Atch Lamps) | 4 |
| 13***02 | Lamp Group-Tail; -Lh | 1 |
157-2728 Lighting Gp-Roading
| 15***28 | Lighting Group-Roading | 1 |
| 3E***84 | Lamp Group-Head & Turn; -Rh | 2 |
| 7K***81 | Strap-Pressure & Return Hoses To | 2 |
204-4506 Lighting Gp-Roading
| 14***04 | Strap-Cable | 3 |
| 15***75 | Washer | 1 |
| 20***06 | Lighting Group-Roading | 1 |
136-5467 Lighting Gp-Warning
| 13***67 | Lighting Group-Warning | 1 |
| 5M***34 | Lamp; (12.8 Volt)(Stoplight-Outside) | 1 |
136-5466 Lighting Gp-Warning
| 13***66 | Lighting Group-Warning | 1 |
| 5M***34 | Lamp; (12.8 Volt)(Stoplight-Outside) | 1 |
146-3503 Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 1 |
113-7299 Sensor & Mounting Gp
| 11***99 | Sensor & Mounting Group | 1 |
| 13***75 | Sensor Group-Ground Speed | 1 |
| 18***47 | Spacer; (23mm Lg X 9.24 Id) | 4 |
9u-1707 Sensor & Mounting Gp
| 13***79 | Sensor Group-Speed; (Radar) | 1 |
| 18***47 | Spacer; (23mm Lg X 9.24 Id) | 4 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 3 |
131-5575 Sensor Gp-Ground Speed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***75 | Sensor Group-Ground Speed | 1 |
| 3E***77 | Wedge-Receptacle Lock; (4-Pin) | 1 |
219-2384 Sensor Gp-Position
| 21***84 | Sensor Group-Position; (Rotary)(Engine Speed) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
161-8906 Sensor Gp-Position
| 16***06 | Sensor Group-Position; -Accelerator Control | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
194-6722 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 1 |
189-5746 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***49 | Strap; (Marker) | 1 |
136-5507 Sensor Gp-Speed
| 12***33 | Lever As | 1 |
| 12***34 | Rod | 1 |
| 13***07 | Sensor Group-Speed | 1 |
132-4579 Sensor Gp-Speed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***79 | Sensor Group-Speed; (Radar) | 1 |
| 3E***77 | Wedge-Receptacle Lock; (4-Pin) | 1 |
129-6628 Sensor Gp-Speed
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 12***28 | Sensor Group-Speed; -Engine Speed/Timing | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
7i-4108 Starting Aid Gp-Ether
| 10***73 | Tube | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
207-1521 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
149-5538 Starting Motor Gp-Electric
| 14***38 | Starting Motor Group-Electric | 1 |
| 20***21 | Starting Motor Group-Electric | 1 |
| 4H***69 | Gasket Starter Mtg Part Of Kit P/N 5r***25 | 1 |
136-5555 Wiring Gp-Cab
| 03***83 | Screw-Machine | 20 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
150-8768 Wiring Gp-Electronic Control
| 10***40 | Sensor Group-Temperature; -Output Transfer Gear Oil | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
136-5579 Wiring Gp-Machine
| 03***06 | Terminal-Ring; (00-Ga, 1/4-In Screw) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***80 | Switch As-Pressure; (Engine Oil) | 1 |
198-0902 Wiring Gp-Steering -Brake
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***35 | Strap-Tie | 10 |
| 15***65 | Grommet | 1 |
117-2760 Wiring Gp-Unit Injector
| 11***60 | Wiring Group-Unit Injector | 1 |
| 2V***16 | Clip; (9.52mm Id) | 4 |
| 4P***37 | Harness Assembly-Wiring; (Unit Injector) | 1 |
Engine Arrangement
160-8595 Engine Ar-Complete
| 10***96 | Flywheel Group | 1 |
| 11***85 | Cover Group-Cylinder Block | 1 |
| 11***90 | Cooler Group-Engine Oil; (Engine Oil) | 1 |
160-8594 Engine Ar-Core
| 11***83 | Cylinder Block Group | 1 |
| 11***06 | Housing Group-Front; (Front) | 1 |
| 11***85 | Cylinder Head Group | 1 |
164-5543 Installation Ar-Engine
| 12***15 | Mounting Group-Fan Drive | 1 |
| 13***62 | Drive Group-Fan | 1 |
| 13***81 | Cooling Group-Supplemental | 1 |
136-5105 Installation Ar-Engine
| 12***15 | Mounting Group-Fan Drive | 1 |
| 13***26 | Heater Group-Jacket Water; -120 Volt | 1 |
| 13***52 | Filter Group-Water Sep & Fuel | 1 |
136-5095 Installation Ar-Engine
| 13***88 | Pulley Group-Alternator | 1 |
| 13***64 | Alternator Group-Charging | 1 |
| 13***83 | Aftercooler Group-Air | 1 |
Frame And Body
141-8887 Bracket Gp
| 14***87 | Bracket Group | 1 |
| 15***55 | Bracket As | 1 |
| 8C***57 | Bolt (3/4-10x2.75in); (3/4-10x2.75-In) | 8 |
155-0388 Counterweight Gp
| 15***55 | Plate | 2 |
| 15***88 | Counterweight Group | 1 |
| 5P***35 | Bolt-Plt; (3/4unc X 8) | 2 |
141-7215 Counterweight Gp
| 10***18 | Rod | 4 |
| 10***20 | Plate | 2 |
| 11***17 | Plate | 2 |
138-7250 Counterweight Gp
| 10***18 | Rod | 4 |
| 10***20 | Plate | 2 |
| 11***17 | Plate | 2 |
141-8880 Counterweight Gp-Rear
| 14***80 | Counterweight Group-Rear | 1 |
| 14***07 | Plate | 13 |
| 14***08 | Plate | 2 |
157-2717 Fender Gp
| 10***36 | Shim; (175mm Lg) | 3 |
| 12***98 | Shim; (230mm Lg) | 1 |
| 13***22 | Plate; (Rh) | 1 |
161-2742 Frame Gp
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 1 |
| 0S***73 | Bolt (102mm Long); (1/2-13x4-In) | 5 |
| 13***28 | Shield | 2 |
157-2730 Guard Gp
| 15***47 | Trim-Hand Hold | 2 |
| 15***30 | Guard Group | 1 |
| 16***55 | Cover As | 1 |
188-8655 Guard Gp-Belt
| 18***91 | Guard As-Belt; (Center) | 1 |
| 18***55 | Guard Group-Belt | 1 |
| 18***56 | Guard As-Belt; (Rh) | 1 |
136-6075 Guard Gp-Rear
| 13***68 | Guard As | 1 |
| 13***75 | Guard Group-Rear | 1 |
| 16***89 | Bracket As | 1 |
157-2738 Guard Gp-Spectator
| 15***38 | Guard Group-Spectator | 1 |
| 16***71 | Guard As | 1 |
| 8C***36 | Bolt (1/2-13x1.375in); (1/2-13x1.375-In) | 4 |
198-4797 Handrail Gp
| 15***20 | Bolt | 2 |
| 15***88 | Washer; (10.5-mm) | 8 |
| 17***54 | U-Bolt | 1 |
157-3858 Handrail Gp
| 11***03 | Bumper | 1 |
| 15***91 | Handhold As | 1 |
| 15***58 | Handrail Group | 1 |
153-2798 Hood & Guard Gp
| 03***26 | Retainer | 2 |
| 10***36 | Marker-Hood | 1 |
| 11***80 | Latch As | 2 |
158-1547 Mounting Gp-Registration -Front
| 15***45 | Plate As | 1 |
| 15***47 | Mounting Group-Registration; -Front | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 4 |
161-2108 Mounting Gp-Registration -Rear
| 15***86 | Lamp As; (License) | 2 |
| 16***44 | Bracket As | 1 |
| 16***08 | Mounting Group-Registration; -Rear | 1 |
156-6086 Mounting Gp-Tank
| 13***44 | Strap As | 2 |
| 13***45 | Plate | 1 |
| 13***47 | Spacer; (104-mm Lgx31.75 Dia) | 4 |
192-3960 Plate Gp-Skid
| 15***80 | Washer | 8 |
| 19***60 | Plate Group-Skid | 1 |
| 19***61 | Plate As | 2 |
178-6901 Plate Gp-Warning
| 14***26 | Clip | 1 |
| 15***60 | Locknut; (M8) | 23 |
| 15***76 | Washer; (Contact) | 4 |
178-6903 Plate Gp-Warning
| 15***60 | Locknut; (M8) | 12 |
| 15***82 | Washer | 8 |
| 17***07 | Plate-Warning | 1 |
173-8303 Reflector Gp
| 14***71 | Reflector, Ring, Ring; Sealing Ring | 6 |
| 14***73 | Reflector; (Red) | 4 |
| 15***56 | Rivet | 10 |
136-6069 Step Gp
| 12***57 | Step As | 1 |
| 13***69 | Step Group | 1 |
| 13***47 | Handrail As | 1 |
184-3026 Warning Gp-Slow Moving Vehicle
| 13***67 | Bracket As | 1 |
| 18***26 | Warning Group-Slow Moving Vehicle | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 3 |
Fuel System
136-4885 Condenser & Mtg Gp-Fuel Cooler
| 10***82 | Latch As-Enclosure | 2 |
| 13***85 | Condenser & Mtg Group-Fuel Cooler | 1 |
| 13***03 | Condenser & Fuel Group | 1 |
136-5508 Control Gp-Governor
| 10***93 | Housing | 1 |
| 13***13 | Plate | 1 |
| 13***43 | Pedal As | 1 |
174-3365 Cover Gp-Decelerator
| 15***76 | Washer; (Contact) | 2 |
| 15***77 | Washer | 2 |
| 15***92 | Bolt; (M10x130mm) | 1 |
116-5436 Filter Gp-Fuel
| 11***36 | Filter Group-Fuel; -Secondary | 1 |
| 1R***62 | Filter As-Fuel; (Advanced Efficiency)(Secondary) | 1 |
133-5671 Filter Gp-Water Sep & Fuel
| 12***75 | Bowl As-Water Collection; (Water Separator, Fuel Filter) | 1 |
| 13***71 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 13***73 | Element; (Filter) (Fuel/Water Separator) (Primary) | 1 |
159-1801 Filter Gp-Water Sep & Fuel
| 13***71 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 15***22 | Bracket As | 1 |
| 15***01 | Filter Group-Water Sep & Fuel | 1 |
136-4552 Filter Gp-Water Sep & Fuel
| 13***71 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 13***52 | Filter Group-Water Sep & Fuel | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 2 |
116-5434 Fitting Gp-Fuel Lines
| 11***34 | Fitting Group-Fuel Lines | 1 |
| 11***35 | Connector | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
117-0183 Fitting Gp-Fuel Lines
| 11***83 | Fitting Group-Fuel Supply; (Supply)(Supply) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 9X***50 | Connector-O-Ring; (O-Ring Port) | 1 |
136-6063 Lines Gp-Fuel
| 12***09 | Valve-Ball; (Hydraulic Tank Drain) | 1 |
| 13***12 | Hose (Fuel) | 1 |
| 13***38 | Hose (Fuel) | 1 |
116-5400 Lines Gp-Fuel Injection
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 10***06 | Valve-Regulator; (Fuel Lines) | 1 |
| 10***29 | Spring | 1 |
136-5521 Mounting Gp-Control
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***36 | Plug As-Code; (For 924f Only) | 1 |
| 12***31 | Control Group-3 Point Hitch | 1 |
116-5428 Pump & Mtg Gp-Fuel Transfer
| 09***70 | Washer-Sealing | 2 |
| 11***17 | Tube As; (Fuel Supply) | 1 |
| 11***28 | Pump & Mtg Group-Fuel Transfer; (Fuel Transfer) | 1 |
116-5415 Pump Gp-Fuel Injection
| 11***15 | Pump Group-Fuel Injection | 1 |
| 11***84 | Seal-O-Ring; (32.99mm Id) | 1 |
| 15***01 | Bolt; (8x1.25x7-mm)(M8x1.25x70mm) | 1 |
116-5411 Pump Gp-Fuel Priming -Hand
| 11***11 | Pump Group-Fuel Priming; -Hand | 1 |
| 13***41 | Pump Group-Fuel Priming; (Hand) | 1 |
| 1P***36 | Gasket; (Fuel Priming Pump)(Fuel Priming Pump) | 1 |
9p-7121 Strainer-Fuel -Tank
| 9P***21 | Strainer-Fuel; (Fuel Tank) | 1 |
148-3583 Tank Gp-Fuel
| 00***90 | Elbow | 1 |
| 10***09 | Cap As-Filler; (Fast Fill Fuel) | 1 |
| 13***42 | Tank-Fuel; (Lh) | 1 |
238-0296 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 23***96 | Valve Group-Check; -Fuel Filter | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
233-6742 Valve Gp-Check -Fuel
| 23***42 | Valve Group-Check; -Fuel Filter | 1 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
281-2725 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
Hydraulic System
173-6971 Valve Gp-Control
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 12***76 | Seat As-Shuttle | 1 |
| 12***96 | Valve Group-Check; (Primary Resolver) | 1 |
180-1650 Valve Gp-Control -Trailer Brakes
| 14***84 | Ball Joint | 1 |
| 15***52 | Seal-O-Ring | 1 |
| 15***71 | Bolt | 2 |
151-4998 Valve Gp-Control
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 12***76 | Seat As-Shuttle | 1 |
| 12***96 | Valve Group-Check; (Primary Resolver) | 1 |
180-1651 Valve Gp-Control -Trailer Brakes
| 15***77 | Washer | 2 |
| 17***05 | Connector As; (Quick) | 1 |
| 17***06 | Connector As; (Quick) | 1 |
9t-1799 Valve Gp-Control
| 10***15 | Valve Group-Solenoid | 1 |
| 2K***98 | Seal-O-Ring | 2 |
| 2K***99 | Seal-Interface Between Inlet Manifold | 2 |
9t-1819 Valve Gp-Relief
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 1 |
| 4T***43 | Valve | 1 |
186-0961 Coupling Gp
| 15***78 | Washer | 2 |
| 17***39 | Coupling Group | 1 |
| 18***13 | Bolt | 1 |
152-4216 Detent Gp-Control Valve
| 10***71 | Housing | 1 |
| 15***16 | Detent Group-Control Valve | 1 |
| 22***54 | Plug-Orifice | 1 |
203-6653 Filter & Mtg Gp-Case Drain
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***77 | Elbow As. | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
136-4360 Filter & Mtg Gp-Hydraulic
| 13***60 | Filter Group-Oil; -Steering | 1 |
| 13***61 | Filter Group-Oil; -Transmission | 1 |
| 13***60 | Filter & Mtg Group-Hydraulic | 1 |
136-0461 Filter Gp-Oil -Transmission
| 13***61 | Filter Group-Oil; -Transmission | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 9S***91 | Plug,Machine Thread Fuel Injection Pump | 1 |
136-0460 Filter Gp-Oil -Steering
| 13***60 | Filter Group-Oil; -Steering | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
197-2052 Filter Gp-Oil -Hydraulic
| 07***92 | Filter-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 19***52 | Filter Group-Oil; -Hydraulic | 1 |
147-8342 Filter Gp-Oil -Implement
| 10***53 | Filter-Oil; (Advanced Efficiency) | 1 |
| 13***14 | Filter As-Hydraulic; (Steering)(Fire Resistant Fluid) | 1 |
| 14***42 | Filter Group-Oil; -Implement | 1 |
136-4358 Hydraulic Ar
| 13***58 | Hydraulic Ar | 1 |
| 13***60 | Filter & Mtg Group-Hydraulic | 1 |
| 13***62 | Pump & Mtg Group-Steering | 1 |
139-1261 Lines Gp-Hydraulic
| 13***54 | Hose As | 1 |
| 13***61 | Lines Group-Hydraulic | 1 |
| 14***48 | Coupler Group | 4 |
148-7006 Lines Gp-Hydraulic
| 10***05 | Tee-O-Ring | 2 |
| 11***94 | Hose As | 1 |
| 11***99 | Hose As | 1 |
161-6399 Lines Gp-Hydraulic
| 10***05 | Tee-O-Ring | 2 |
| 11***94 | Hose As | 1 |
| 11***99 | Hose As | 1 |
161-9012 Lines Gp-Hydraulic
| 12***83 | Tube As | 1 |
| 14***11 | Hose As | 1 |
| 14***51 | Hose As | 1 |
145-9544 Lines Gp-Hydraulic
| 13***54 | Hose As | 1 |
| 14***44 | Lines Group-Hydraulic | 1 |
| 14***48 | Coupler Group | 4 |
206-8812 Lines Gp-Hydraulic Drain -Motor With 3 Point Hitch
| 14***97 | Plate | 1 |
| 14***62 | Clamp | 1 |
| 14***04 | Strap-Cable | 2 |
206-8813 Lines Gp-Hydraulic Drain -Motor Without 3 Point Hitch
| 14***04 | Strap-Cable | 2 |
| 15***77 | Washer | 1 |
| 18***55 | Bolt | 1 |
113-7264 Motor & Mounting Gp
| 11***64 | Motor & Mounting Group | 1 |
| 15***52 | Motor Group-Piston | 1 |
| 4K***75 | Bolt-12 Point Head 38.1mm (1.501in) Long | 4 |
130-8448 Motor & Mounting Gp -Steering
| 13***48 | Motor & Mounting Group; -Steering | 1 |
| 15***51 | Motor Group-Piston; -Steering | 1 |
| 4K***75 | Bolt-12 Point Head 38.1mm (1.501in) Long | 4 |
148-0891 Mounting Gp-Valve
| 10***18 | Housing, Angle As | 1 |
| 10***72 | Angle As | 1 |
| 14***03 | Bracket As | 1 |
136-4394 Pump & Mtg Gp-Hydraulic
| 13***94 | Pump & Mtg Group-Hydraulic | 1 |
| 15***44 | Pump Group-Piston; -Hydraulic | 1 |
| 15***22 | Pump Group-Piston | 1 |
158-0522 Pump Gp-Piston
| 08***19 | Pin | 1 |
| 10***85 | Bolt-Socket Head | 4 |
| 11***01 | Seal (Rear Pump To Center Pump) | 1 |
156-8044 Pump Gp-Piston -Hydraulic
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 1 |
145-8830 Rotating Gp-Pump
| 00***55 | Ring-Retaining | 1 |
| 14***24 | Piston As-Pump | 9 |
| 14***27 | Barrel-Cylinder | 1 |
264-5143 Rotating Gp-Pump
| 16***78 | Bearing-Spherical | 1 |
| 16***79 | Pin | 3 |
| 16***80 | Barrel-Cylinder | 1 |
136-6073 Tank Gp-Hydraulic
| 13***73 | Tank Group-Hydraulic | 1 |
| 13***58 | Tank As-Hydraulic | 1 |
| 13***42 | Gauge-Sight | 1 |
203-6043 Valve & Lines Gp-Load Control -Implement Load Control
| 12***84 | Ring-Backup | 1 |
| 12***85 | Ring-Backup | 1 |
| 14***27 | Bolt-Hex Head; (3/8-16x2.5 In) | 1 |
8j-6875 Valve Gp-Shuttle
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 4B***84 | Ball | 1 |
| 4T***05 | Adapter | 2 |
112-4544 Valve Gp-Bank
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 4 |
| 11***27 | Valve Group-Selector & Press Cont | 1 |
| 11***30 | Valve Group-Pressure Control | 1 |
173-6969 Valve Gp-Bank
| 10***18 | Cover-End | 1 |
| 10***62 | Cover-Inlet | 1 |
| 17***69 | Valve Group-Bank | 1 |
173-6970 Valve Gp-Bank 4
| 10***89 | Manifold As | 1 |
| 10***62 | Cover-Inlet | 1 |
| 17***70 | Valve Group-Bank 4 | 1 |
152-2136 Valve Gp-Bank 4
| 10***18 | Cover-End | 1 |
| 10***62 | Cover-Inlet | 1 |
| 15***98 | Valve Group-Control | 4 |
152-2137 Valve Gp-Bank 4
| 10***89 | Manifold As | 1 |
| 10***62 | Cover-Inlet | 1 |
| 15***98 | Valve Group-Control | 4 |
152-2138 Valve Gp-Bank 5
| 10***97 | Cover | 1 |
| 15***37 | Valve Group-Bank 4 | 1 |
| 15***38 | Valve Group-Bank 5 | 1 |
173-6972 Valve Gp-Bank 5
| 10***97 | Cover | 1 |
| 17***70 | Valve Group-Bank 4 | 1 |
| 17***72 | Valve Group-Bank 5 | 1 |
4t-4273 Valve Gp-Breaker Relief
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 4T***45 | Valve-Breaker Relief | 1 |
| 4T***73 | Valve Group-Breaker Relief | 1 |
173-2075 Valve Gp-Diverter
| 17***75 | Valve Group-Diverter | 1 |
| 17***34 | Plug-Orifice | 2 |
| 17***35 | Spring | 1 |
168-2210 Valve Gp-Pump Control -Pressure, Flow Compensator
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 16***10 | Valve Group-Pump Control; -Pressure, Flow Compensator-Hydraulic Oil Clg Fan Piston Pump | 1 |
6e-6568 Valve Gp-Pump Control
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
152-2646 Valve Gp-Shuttle
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
100-3915 Valve Gp-Solenoid
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 8 |
| 10***15 | Valve Group-Solenoid | 1 |
| 10***16 | Solenoid As-Bidirectional | 1 |
Lubrication System
166-1329 Base Gp-Oil Filter -Engine
| 11***45 | Valve-Pump Bypass; (Engine Oil Filter) | 1 |
| 16***28 | Base Assem. | 1 |
| 16***29 | Base Group-Oil Filter; -Engine | 1 |
122-0725 Base Gp-Oil Filter -Engine
| 11***45 | Valve-Pump Bypass; (Engine Oil Filter) | 1 |
| 12***25 | Base Group-Oil Filter; -Engine | 1 |
| 12***26 | Base As; (Oil Filter) | 1 |
117-2786 Cover Gp-Oil Filter Base -Engine
| 11***86 | Cover Group-Oil Filter Base; -Engine | 1 |
| 5S***34 | Seal-O-Ring; (97.79mm Id) | 1 |
| 7C***42 | Cover; (Filter Base) | 1 |
143-2655 Filler Gp-Engine Oil
| 03***49 | Nut-Self Lock; (No.10.Unc) | 1 |
| 06***08 | . Bolt; Socket, Clamp-Tubing | 1 |
| 12***81 | Seal-Integral; (Air Compressor Mounting) | 1 |
117-2751 Filter Gp-Engine Oil
| 11***51 | Filter Group-Engine Oil | 1 |
| 12***25 | Base Group-Oil Filter; -Engine | 1 |
| 13***45 | Bolt-Hex Head; (M10x1.50x30) | 6 |
123-0783 Valve Gp-Fluid Sampling
| 12***83 | Fitting Group-Fuel Lines; -Fuel | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***52 | Cap-Dust; (Fuel Supply Tee Connection) | 1 |
154-6835 Fumes Disposal Gp
| 12***46 | Hose-Fumes Disposal | 1 |
| 15***35 | Fumes Disposal Group | 1 |
| 2S***53 | Clip; (34.92mm Id) | 1 |
143-2656 Gauge Gp-Oil Level (Dipstick) -Engine
| 12***19 | Gauge As-Oil Level (Dipstick) | 1 |
| 14***54 | Tube As-Gauge Guide | 1 |
| 14***56 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
115-9377 Lines Gp-Turbocharger Oil
| 11***87 | Seal-O-Ring (23.16 mm Id) | 1 |
| 11***77 | Lines Group-Turbocharger Oil | 1 |
| 11***42 | Adapter | 1 |
117-2746 Pump Gp-Engine Oil
| 06***61 | Seal-O-Ring (Id=40.87mm) | 1 |
| 11***03 | Tube Assem. | 1 |
| 11***46 | Pump Group-Engine Oil | 1 |
233-5220 Pump Gp-Engine Oil
| 23***20 | Pump Group-Engine Oil | 1 |
| 6D***46 | Seal-O-Ring (Id=101.27mm) | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 4 |
138-2535 Valve Gp-Fluid Sampling -Engine Oil
| 13***35 | Valve Group-Fluid Sampling; -Engine Oil | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 5P***17 | Adapter- To Logic Valve 1u***59 | 1 |
Machine Arrangement
157-2715 Base Common Ar
| 13***58 | Hydraulic Ar | 1 |
| 13***63 | Power Train Ar | 1 |
| 15***15 | Base Common Ar | 1 |
157-2712 Base Unit Ar
| 13***34 | Lines Group-Pump | 1 |
| 13***53 | Planetary Group-Differential Ster | 1 |
| 13***70 | Final Drive Group | 1 |
199-5521 Certification Ar
| 19***72 | Steering Ar; -Brake | 1 |
| 19***21 | Certification Ar | 1 |
| 19***27 | Lighting Group; -Roading | 1 |
157-3857 Certification Ar
| 10***95 | Visor Group-Cab | 1 |
| 13***80 | Support-Speaker | 1 |
| 13***39 | Speaker Group-Radio | 1 |
157-3856 Chassis Ar
| 13***35 | Lines Group-Air Conditioner | 1 |
| 13***90 | Washer Group-Window | 1 |
| 13***79 | Wiring Group-Machine | 1 |
157-2719 Configuration Ar
| 10***95 | Visor Group-Cab | 1 |
| 13***80 | Support-Speaker | 1 |
| 13***39 | Speaker Group-Radio | 1 |
157-3850 Special Ar-Standard
| 13***71 | Steering Ar-Standard | 1 |
| 13***23 | Special Ar-Without Power Take-Off | 1 |
| 13***05 | Plate & Film Group | 1 |
157-3863 Special Ar-Without Hitch
| 13***10 | Adapter Group-3 Point Hitch | 1 |
| 13***75 | Guard Group-Rear | 1 |
| 14***44 | Lines Group-Hydraulic | 1 |
136-5523 Special Ar-Without Pto
| 11***73 | Adapter Group-Power Take-Off | 1 |
| 13***21 | Transmission Ar; -Without Power Take-Off | 1 |
| 13***23 | Special Ar-Without Power Take-Off | 1 |
Operator Station
139-0719 Air Conditioner Gp
| 03***26 | Retainer | 1 |
| 03***38 | Clamp | 2 |
| 10***43 | Plate-Orifice | 2 |
136-5500 Cab Gp
| 09***55 | Clip | 2 |
| 11***60 | Bumper-Rubber | 35 |
| 12***07 | Button As | 4 |
157-3868 Cab Gp
| 13***00 | Cab Group | 1 |
| 13***08 | Control Group-Governor | 1 |
| 13***10 | Control Group-Transmission | 1 |
157-3867 Cab Gp
| 13***00 | Cab Group | 1 |
| 13***08 | Control Group-Governor | 1 |
| 13***10 | Control Group-Transmission | 1 |
136-5114 Compressor Gp-Refrigerant
| 11***13 | Guard As | 1 |
| 13***14 | Compressor Group-Refrigerant | 1 |
| 15***77 | Bolt-Hex Head; (M12x1.75x140mm) | 2 |
3e-1908 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 31***18 | Valve As-Pressure Relief; (Refrigerant Compressor) | 1 |
136-5512 Control Gp-Hydraulic Hand
| 13***47 | Lever | 1 |
| 13***48 | Lever | 1 |
| 13***49 | Lever | 1 |
171-2089 Control Gp-Monitor -English/Spanish
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***31 | Kit-Bracket & Cover; -Cat Id Display | 1 |
| 17***87 | Control Group-Display Eprom; (Cat Id-English, Spanish) | 0 |
171-2090 Control Gp-Monitor -English/German
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***31 | Kit-Bracket & Cover; -Cat Id Display | 1 |
| 17***88 | Control Group-Display Eprom; (Cat Id-English, German) | 1 |
136-5510 Control Gp-Transmission
| 03***17 | Bolt-Self Locking; (1/4-20x.88in) | 2 |
| 12***45 | Handhold | 1 |
| 12***46 | Gate | 1 |
136-5519 Cover Gp-Dash
| 13***66 | Insulation-Dash | 1 |
| 13***48 | Cover-Dash | 1 |
| 13***19 | Cover Group-Dash | 1 |
188-2928 Display Gp-Cat Id -English/Spanish
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***31 | Kit-Bracket & Cover; -Cat Id Display | 1 |
| 17***87 | Control Group-Display Eprom; (Cat Id-English, Spanish) | 0 |
136-5292 Door Gp-Cab
| 11***49 | Handle As | 1 |
| 13***14 | Hinge As | 1 |
| 13***69 | Frame As-Door | 1 |
136-5520 Duct & Control Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 13***18 | Duct | 1 |
| 13***20 | Duct & Control Group | 1 |
136-5222 Frame Gp-Window -Rear
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***53 | Washer, Tooth | 2 |
| 13***09 | Frame As | 1 |
108-4229 Horn Gp-Electric
| 10***29 | Horn Group-Electric | 1 |
| 10***75 | Horn As | 1 |
| 5T***04 | Wire Assem. | 2 |
136-5513 Installation Gp-Cab
| 10***25 | Screw-Machine; (8-32x1-In) | 16 |
| 10***02 | Bracket | 1 |
| 13***14 | Speaker As | 2 |
157-3851 Installation Gp-Cab
| 03***38 | Screw; (6-32x1.0in) | 2 |
| 03***12 | Screw-Forming; (10-24x0.5-In) | 2 |
| 03***17 | Bolt-Self Locking; (1/4-20x.88in) | 1 |
136-5582 Kit-Radio
| 10***82 | Sleeve | 1 |
| 13***90 | Bushing; (Radio Mount) | 1 |
| 13***91 | Harness As-Radio | 1 |
136-5581 Kit-Radio
| 13***40 | Radio Group | 1 |
| 13***81 | Kit-Radio | 1 |
136-5328 Liner As-Cab
| 10***25 | Screw-Machine; (8-32x1-In) | 8 |
| 10***01 | Nut-Clip | 21 |
| 13***28 | Liner As-Cab | 1 |
136-4935 Lines Gp-Air Conditioner
| 13***06 | Hose | 1 |
| 13***07 | Hose | 1 |
| 13***08 | Tube | 1 |
173-1411 Mirror Gp-Rear View
| 16***55 | Mirror As | 2 |
| 16***57 | Arm As-Rh | 1 |
| 17***21 | Mirror As; (Standard) | 2 |
201-8336 Mirror Gp-Rear View
| 14***71 | Switch As-Rocker; (14-Volt, Sealed, Illuminated)(Heated Mirrors) | 1 |
| 14***04 | Actuator-Rocker | 1 |
| 14***49 | Switch; (12-Volt)(Electric Mirror Adjustment) | 1 |
204-4480 Mirror Gp-Rear View
| 14***71 | Switch As-Rocker; (14-Volt, Sealed, Illuminated)(Heated Mirrors) | 1 |
| 14***04 | Actuator-Rocker | 1 |
| 14***49 | Switch; (12-Volt)(Electric Mirror Adjustment) | 1 |
204-4479 Mirror Gp-Rear View
| 14***71 | Switch As-Rocker; (14-Volt, Sealed, Illuminated)(Heated Mirrors) | 1 |
| 14***04 | Actuator-Rocker | 1 |
| 14***49 | Switch; (12-Volt)(Electric Mirror Adjustment) | 1 |
204-4478 Mirror Gp-Rear View
| 14***71 | Switch As-Rocker; (14-Volt, Sealed, Illuminated)(Heated Mirrors) | 1 |
| 14***04 | Actuator-Rocker | 1 |
| 14***49 | Switch; (12-Volt)(Electric Mirror Adjustment) | 1 |
164-1959 Mirror Gp-Rear View
| 16***55 | Mirror As | 1 |
| 16***57 | Arm As-Rh | 1 |
| 16***58 | Arm As-Lh | 1 |
136-5586 Monitor Ar-Machine Performance
| 13***86 | Monitor Ar-Machine Performance | 1 |
| 14***31 | Control Group-Monitor Electronic | 1 |
| 9U***07 | Sensor & Mounting Group | 1 |
136-5587 Monitor Ar-Machine Performance
| 11***99 | Sensor & Mounting Group | 1 |
| 13***87 | Monitor Ar-Machine Performance | 1 |
| 14***30 | Control Group-Machine Performance | 1 |
208-8083 Mounting Gp-Fire Extinguisher
| 15***60 | Locknut; (M8) | 2 |
| 15***76 | Washer; (Contact) | 2 |
| 18***44 | Fire Extinguisher | 1 |
208-8086 Mounting Gp-Fire Extinguisher
| 15***60 | Locknut; (M8) | 2 |
| 15***76 | Washer; (Contact) | 2 |
| 18***47 | Fire Extinguisher | 1 |
208-8085 Mounting Gp-Fire Extinguisher
| 15***60 | Locknut; (M8) | 2 |
| 15***76 | Washer; (Contact) | 2 |
| 18***46 | Fire Extinguisher | 1 |
208-8087 Mounting Gp-Fire Extinguisher
| 15***60 | Locknut; (M8) | 2 |
| 15***76 | Washer; (Contact) | 2 |
| 18***48 | Fire Extinguisher | 1 |
208-8084 Mounting Gp-Fire Extinguisher
| 15***60 | Locknut; (M8) | 2 |
| 15***76 | Washer; (Contact) | 2 |
| 18***45 | Fire Extinguisher | 1 |
164-3993 Mounting Gp-Mirror & Beacon
| 12***78 | Washer; (16x38x5-mm Thk) | 2 |
| 16***83 | Mount As | 1 |
| 16***93 | Mounting Group-Mirror & Beacon | 1 |
136-5518 Panel Gp-Instrument
| 12***07 | Panel As | 1 |
| 13***36 | Film-Dash | 1 |
| 13***37 | Panel As | 1 |
136-5543 Player Gp-Compact Disc
| 13***99 | Harness As | 1 |
| 13***48 | Harness As | 1 |
| 13***43 | Player Group-Compact Disc | 1 |
136-5583 Radio Gp
| 13***99 | Harness As | 1 |
| 13***48 | Harness As | 1 |
| 13***43 | Player Group-Compact Disc | 1 |
136-5540 Radio Gp
| 10***82 | Sleeve | 1 |
| 13***90 | Bushing; (Radio Mount) | 1 |
| 13***40 | Radio Group | 1 |
136-5542 Radio Gp
| 10***82 | Sleeve | 1 |
| 13***90 | Bushing; (Radio Mount) | 1 |
| 13***42 | Radio Group | 1 |
142-9806 Roof Gp-Cab
| 12***78 | Washer; (16x38x5-mm Thk) | 4 |
| 14***06 | Roof Group-Cab | 1 |
| 15***33 | Screw-Washer Hd | 6 |
136-5411 Seat Gp
| 11***20 | Kit-Wiring Harness Service | 1 |
| 11***21 | Kit-Air Spring | 1 |
| 11***22 | Absorber As-Shock | 1 |
136-5360 Seat Gp-Companion
| 13***53 | Seat Belt As | 1 |
| 13***59 | Support As | 1 |
| 13***60 | Seat Group-Companion | 1 |
161-4411 Seat Gp-Suspension
| 11***28 | Bracket As | 1 |
| 13***11 | Seat Group | 1 |
| 16***10 | Spacer | 2 |
136-5539 Speaker Gp-Radio
| 13***33 | Speaker As | 2 |
| 13***39 | Knob | 1 |
| 13***80 | Support-Speaker | 1 |
150-9222 Support Gp-Monitor
| 15***59 | Bracket | 1 |
| 15***60 | Support | 2 |
| 15***22 | Support Group-Monitor | 1 |
105-4895 Visor Gp-Cab
| 09***14 | Spacer | 1 |
| 10***95 | Visor Group-Cab | 1 |
| 11***83 | Bracket | 1 |
104-5687 Voltmeter Gp
| 10***87 | Voltmeter Group; (12-Volt) | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 2 |
| 4B***43 | Nut,Plain,Hexagon Plate Mtg | 2 |
136-5390 Washer Gp-Window
| 10***19 | Pump As-Washer | 2 |
| 12***18 | Seal; (1000-cm) | 0 |
| 13***90 | Washer Group-Window | 1 |
136-5516 Wiper Gp-Window
| 13***94 | Nozzle As-Washer | 1 |
| 13***44 | Bracket; (Front) | 1 |
| 13***76 | Arm As | 2 |
Power Train
9w-0342 Actuator Gp-Rotary
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 9 |
| 1B***14 | Cap Screw--Pipe To Carburetor | 2 |
| 2H***65 | Pin (Spring) | 1 |
7t-7953 Pump Gp-Gear
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 4 |
| 15***73 | Body As-Oil Pump | 1 |
7t-7990 Pump Gp-Gear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
| 2K***57 | Seal-O-Ring (148.82mm Id) | 1 |
3w-5032 Support Gp-Transmission
| 1D***15 | Bolt 139.70 mm(5.50 In.) Long | 4 |
| 1P***51 | Plug-Seal | 3 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 2 |
8y-1293 Universal Joint Gp
| 0S***04 | Bolt (1/2-20x2.5in); (1/2-20x2.5-In) | 8 |
| 13***97 | Seal | 0 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
6y-0185 Valve Gp-Modulating
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 2 |
| 1S***36 | Retainer | 1 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 1 |
149-6328 Case & Parts Gp-Transmission -With Power Take-Off
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 10 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
149-6329 Case & Parts Gp-Transmission -Without Power Take-Off
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 10 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
6i-8630 Clutch Gp
| 05***94 | Bolt-12 Point Head; (3/8-16x1.75-In) | 24 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 12 |
| 13***16 | Hub-Clutch | 1 |
134-9776 Clutch Gp
| 0L***58 | Bolt 8.26cm (3.25 In.) Long | 1 |
| 13***94 | Gear; (36-Teeth) | 1 |
| 13***94 | Piston | 2 |
140-1315 Control Gp-Transmission Hyd
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 1 |
| 11***44 | Valve Group-Bank | 1 |
149-6337 Cover Gp-Shipping -Without Power Take-Off
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
149-6335 Cover Gp-Shipping -With Power Take-Off
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
6i-8632 Drive Gp-Pump -Transmission
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 4 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 3 |
| 1S***82 | Coupling | 1 |
136-1042 Drive Gp-Pump -Steering
| 13***40 | Gear; (39 Teeth) | 1 |
| 13***42 | Drive Group-Pump; -Steering | 1 |
| 2S***29 | Ball Bearing | 1 |
136-6074 Filler Gp-Power Train Oil
| 06***97 | Cap-Oil Filler; (Engine Oil) | 1 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 6 |
| 10***37 | Cap-Breather | 1 |
136-4270 Final Drive Gp
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 8 |
| 13***37 | Gear-Pinion; (13-Teeth) | 2 |
| 13***70 | Final Drive Group | 1 |
113-9800 Lines Gp-Filter -Transmission
| 11***95 | Hose As | 1 |
| 11***97 | Hose As | 1 |
| 11***00 | Lines Group-Filter; -Transmission | 1 |
136-4898 Lines Gp-Power Train Oil
| 13***98 | Lines Group-Power Train Oil | 1 |
| 13***22 | Hose As | 1 |
| 14***90 | Hose As | 1 |
135-2524 Planetary Gp-Transmission
| 00***41 | Ring | 1 |
| 0L***58 | Bolt 8.26cm (3.25 In.) Long | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
136-4363 Power Train Ar
| 10***06 | Shaft Group-Input | 1 |
| 10***61 | Shaft Group-Drive | 1 |
| 10***30 | Suspension Group-Bogie | 1 |
103-8861 Shaft Gp-Drive
| 0L***58 | Bolt 8.26cm (3.25 In.) Long | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 8 |
| 10***59 | Retainer | 1 |
135-0519 Shaft Gp-Input
| 13***57 | Shaft-Input | 1 |
| 13***19 | Shaft Group-Input | 1 |
| 13***26 | Gear; (35 Teeth) | 1 |
102-0406 Shaft Gp-Input
| 0S***84 | Cap Screw (2 1/4" Long) | 8 |
| 10***06 | Shaft Group-Input | 1 |
| 10***07 | Universal Joint Group | 1 |
135-2522 Transmission Ar -With Power Take-Off
| 13***76 | Clutch Group | 1 |
| 13***19 | Shaft Group-Input | 1 |
| 13***22 | Transmission Ar; -With Power Take-Off | 1 |
135-2521 Transmission Ar -Without Power Take-Off
| 13***76 | Clutch Group | 1 |
| 13***19 | Shaft Group-Input | 1 |
| 13***21 | Transmission Ar; -Without Power Take-Off | 1 |
112-4530 Valve Gp-Pressure Control
| 11***30 | Valve Group-Pressure Control | 1 |
| 16***79 | Body-Load Piston | 8 |
| 1S***36 | Retainer | 1 |
103-5460 Valve Gp-Relief
| 10***60 | Valve Group-Relief | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4B***84 | Ball | 1 |
139-5834 Valve Gp-Relief
| 13***33 | Body-Valve | 1 |
| 13***34 | Valve Group-Relief | 1 |
| 14***41 | Spool As | 1 |
156-5797 Valve Gp-Relief
| 15***97 | Valve Group-Relief | 1 |
| 15***98 | Valve Group-Relief | 1 |
112-4527 Valve Gp-Selector & Press Cont
| 11***25 | Spool As-Rotary | 1 |
| 11***27 | Valve Group-Selector & Press Cont | 1 |
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 3 |
136-7628 Wheel Gp-Drive -Rubber
| 13***78 | Guard As | 2 |
| 13***28 | Wheel Group-Drive; -Rubber | 1 |
| 14***35 | Plate-Wear | 2 |
134-0783 Wheel Gp-Drive -Slotted Cast
| 10***67 | Wheel-Slotted Drive | 2 |
| 13***78 | Guard As | 2 |
| 13***83 | Wheel Group-Drive; -Slotted Cast | 1 |
Service Equipment And Supplies
191-5989 Chock Gp-Wheel
| 15***59 | Chock-Wheel | 1 |
| 15***30 | Bracket | 1 |
| 15***77 | Washer | 6 |
173-8685 Chock Gp-Wheel
| 15***59 | Chock-Wheel | 1 |
| 15***30 | Bracket | 1 |
| 15***77 | Washer | 7 |
163-0411 Conversion Gp-Certification -Transmission
| 14***03 | Film | 3 |
| 15***59 | Spool-Selector | 1 |
| 16***11 | Conversion Group-Certification; -Transmission | 1 |
156-8189 Film Gp
| 15***46 | Film; (95e-Lh) | 1 |
| 15***47 | Film; (95e-Rh) | 1 |
| 15***89 | Film Group | 1 |
136-5601 Plate & Film Gp
| 10***97 | Film-Notice | 1 |
| 13***85 | Plate-Warning-Rops/Fops | 1 |
| 13***01 | Plate & Film Group | 1 |
190-2955 Plate & Film Gp
| 10***46 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 2 |
| 13***83 | Film-Warning | 2 |
| 13***84 | Film-Notice | 1 |
156-8188 Plate & Film Gp
| 10***30 | Film; (Warning) (Accumulator Pressure) (On Bracket Covering Brake Accumulator) | 1 |
| 11***01 | Film-Identification; (Auxiliary, Main Circuit Bkr), . Tube; Cyl. Ass'Y | 1 |
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
136-5605 Plate & Film Gp
| 10***40 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 4 |
| 13***05 | Plate & Film Group | 1 |
| 13***12 | Plate-Warning-Rops/Fops | 1 |
Undercarriage
136-4364 Axle Gp-Front
| 10***50 | Spindle | 2 |
| 10***37 | Hub-Idler Wheel | 2 |
| 10***73 | Cap Group-Hub | 2 |
1r-1141 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***98 | Belt 626 mm (25") Wide | 2 |
1r-1140 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***97 | Track-Rubber | 2 |
1r-0902 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***02 | Belt Ar | 1 |
1r-1143 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***76 | Track-Rubber; (Belt) | 2 |
1r-1146 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***03 | Track-Rubber; (Belt) | 1 |
1r-1142 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***75 | Track-Rubber; (Belt) | 2 |
1r-1145 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***01 | Track-Rubber; (Belt) | 1 |
1r-1190 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***87 | Track-Rubber | 2 |
145-9567 Belt Tensioner Gp
| 13***81 | Pin As | 4 |
| 14***67 | Belt Tensioner Group | 1 |
| 14***31 | Cylinder Group-Belt Tensioner | 2 |
120-9131 Control Gp-3 Point Hitch
| 12***31 | Control Group-3 Point Hitch | 1 |
| 13***48 | Lever | 1 |
| 16***06 | Sensor Group-Position; -Accelerator Control | 1 |
148-3031 Cylinder Gp-Belt Tensioner
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 10 |
| 10***45 | Plate | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
1r-1139 Idler Gp
| 1R***39 | Idler Group | 1 |
| 1R***46 | Wheel As-Idler | 4 |
198-6816 Scraper Gp-Drum
| 14***81 | Spacer; (13.5x25x12-mm Thk) | 8 |
| 15***53 | Plate | 2 |
| 15***54 | Plate-Wear | 4 |
105-8661 Support Gp-Suspension
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 6 |
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 24 |
| 10***19 | Retainer-Inner | 1 |
104-8030 Suspension Gp-Bogie
| 05***03 | Washer; (40.46x69.85x7.37-mm Thk) | 16 |
| 09***11 | Plate | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 96 |
178-7421 Track Gp-Rubber
| 11***52 | Shim-Tapered; (0.2-Deg) | 2 |
| 11***58 | Shim-Tapered; (0.8-Deg) | 2 |
| 17***21 | Track Group-Rubber | 1 |
173-7261 Track Gp-Rubber
| 11***52 | Shim-Tapered; (0.2-Deg) | 2 |
| 11***58 | Shim-Tapered; (0.8-Deg) | 2 |
| 17***61 | Track Group-Rubber | 1 |
152-0815 Track Gp-Rubber
| 11***52 | Shim-Tapered; (0.2-Deg) | 2 |
| 11***58 | Shim-Tapered; (0.8-Deg) | 2 |
| 15***15 | Track Group-Rubber | 1 |
183-8411 Track Gp-Rubber
| 18***11 | Track Group-Rubber | 1 |
| 1R***35 | Track-Rubber | 2 |
202-1014 Track Gp-Rubber
| 11***52 | Shim-Tapered; (0.2-Deg) | 2 |
| 11***58 | Shim-Tapered; (0.8-Deg) | 2 |
| 1R***55 | Track-Rubber | 2 |
95E serial number reference
The PIN/serial plate on the 95E sits on the tractor frame near the cab entry steps or forward frame rail (same general area used across the 65E/75E/85E/95E Challenger line, which share a single PIN-location document). Check the operator manual's PIN location diagram if it is not visible there. Read the first 3 characters as the prefix identifying the model and build block (e.g. 6KS or 1SM), followed by a sequential unit number; on later full 17-character PINs the same 3-letter code sits in the position identifying serial number sequence.
| Prefix | Identifies | Notes |
|---|---|---|
| 6KS | Challenger 95E agricultural tractor, base/early production run | Parts-catalog line lists 6KS00001-UP as the Challenger 95E Agricultural Tractor, powered by the 3196 engine. A titled, in-service 95E carries a 6KS-prefix serial, consistent with 95E production starting 1998. |
| 1SM | Challenger 95E agricultural tractor, later production run | Parts-catalog line lists 1SM00001-UP as the Challenger 95E Agricultural Tractor, powered by the 3196 engine, under a separate document number from the 6KS block. Consistent with a later portion of the 95E production span (95E built 1998-2001). |
Frequently asked questions
What engine does the Caterpillar 95E Challenger use?
A Cat 3196 turbocharged and aftercooled 11.9L (729 cu in) inline-six diesel, rated at roughly 410 gross hp (305 kW) at 2100 rpm, with a Cat-claimed PTO rating around 302 hp.
What is the operating weight of the Caterpillar 95E Challenger?
Roughly 33,980-35,500 lb (15,410-16,100 kg), varying by ballast, tires versus Mobil-Trac fitment details, and other configuration options.
What replaced the Caterpillar 95E Challenger?
Caterpillar sold the Challenger agricultural line to AGCO in 2002. The high-horsepower tracked segment the 95E occupied was continued by AGCO's Challenger MT700-series tracked tractors, an AGCO product rather than a Caterpillar model.
What 95E owners discuss
How reliable is the Cat 3196 engine in the 95E, and what wears out first?
Owners describe the turbocharged/intercooled 3196 as a strong, dependable engine when fuel filtration is kept up. Change fuel filters on schedule and use clean fuel; operators running the 95E and its lower-horsepower siblings past 7,000 hours report only routine injector work and normal oil consumption (roughly a liter every couple hundred hours). Injector wear on higher-hour machines shows up as reduced power, rough idle, or extra smoke — treat injectors as a scheduled wear item on this engine rather than a failure.
Why does the 95E crank slow or refuse to start in cold weather, and does it use glow plugs?
The 3196 does not use glow plugs; cold starts are handled by an ECM-controlled ether injection system. Press and briefly hold the ether button just after the starter engages — the system meters a single charge and stops on its own. Do not add ether manually or hold the button longer than needed; overdosing can damage the engine and ether itself is flammable, so use it only with the machine's automatic system. Most reported no-start or slow-crank complaints on this machine trace back to poor battery cable or ground-strap connections rather than the engine itself — check every terminal and ground point for corrosion or looseness before chasing fuel or injector causes. If cranking, grounds, and the ether system all check out and cold starting is still hard, have your dealer verify injector and ECM cold-start operation.
How complex is the 95E's electrical system, and what sensor issues come up?
The 95E is considered electrically simple by owners — the engine is the only system on the machine that is electronically controlled, with the rest of the tractor running conventional mechanical/hydraulic circuits. When engine performance issues show up, check the injector wiring harness and connectors for corrosion, chafing, or looseness before assuming a sensor or control module fault; uneven voltage reaching the injectors from a degraded harness connection is a more common culprit than an electronic failure on this machine.
What track and undercarriage wear patterns are typical on the 95E?
Drive-wheel type has a big effect on rubber track life: chevron-pattern drive wheels are preferred, and cast drivers are reported to wear tracks faster under heavy drawbar load. Keep the undercarriage free of packed dirt and debris — material lodged against the drive wheels is a common cause of accelerated wear and added vibration. Running oversize (about 890 mm / 35 in) tracks on this frame is discouraged; reports describe more vibration and faster wear than the factory track width. Check track tension regularly — too loose causes drive-wheel slip and edge wear, too tight accelerates carcass fatigue — and inspect for uneven wear that points to misalignment.
Why do the bogie wheels or final drive hubs leak, and how should the seals be serviced?
A leak at a bogie/mid-roller or final drive hub is more often a bent axle than a bad seal — set a level on the mid-rollers and compare side-to-side readings before replacing the seal. These hubs use duo-cone (face) seals that need an oil bath; do not pack them with grease, since grease starves a duo-cone seal and shortens its life sharply. Properly installed and running in clean oil, duo-cone seals are reported to reach roughly 8,000-10,000 hours before wearing out, though heavy dirt exposure cuts that life down. After a reseal, rotate the wheel and confirm the seal doesn't wobble — a seal installed slightly cocked fails early.
What causes steering shudder or a stiff/limited turn on the 95E's hydrostatic differential steering?
Steering shudder or a turn that won't complete a full lock usually points to hydraulic pressure loss or worn steering control-valve components, not the track drive itself. Start by checking hydraulic fluid level and condition, then inspect the steering control valve and hoses for leaks or restriction. Operators also note the 95E turns poorly if the drive wheel/track interface is wet, so expect reduced steering response in wet conditions even on a healthy system; the E-series machines carry more hydraulic flow capacity than earlier Challenger generations, which sharpened steering response when the system is in good order. Because differential steering is tied directly into directional control, have your dealer verify steering valve and charge pressure before returning the machine to field work.
What should I check before buying a used 95E?
Inspect tracks and undercarriage first — wear pattern, drive-wheel type (chevron versus cast), and bogie/roller seal condition are the biggest cost items if neglected. Ask for final drive service history and oil-sample or filter-inspection records; the pinion gear and bearing in the final drive run closer to their design limit at 95E power levels than on the lower-horsepower Challenger siblings sharing the same architecture, so this is the drivetrain component most likely to fail prematurely if service was skipped. Verify the hour meter against wear evidence and paperwork, since displayed hours aren't always trustworthy. Cycle the 10-speed powershift through its shift points — the 2-3, 5-6, and 8-9 shifts are naturally a bit sharp on this transmission but should not slip or hesitate. Run the steering through full-lock turns in both directions checking for shudder or slow response. Have your dealer perform a full fluid, undercarriage, and final-drive inspection before finalizing the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 95E part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.