Caterpillartrack-type loadertrack loader
Caterpillar 953C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 953C is a mid-size track-type loader, a crawler-mounted loader chassis built for loading, grading, and site work on soft or uneven ground, not a dozer variant; no blade was ever cataloged for it. Early-production machines (serial prefix 2ZN) ran a Cat 3116/3116T inline-six diesel rated near 90 kW (121 hp) net; later-production machines (serial prefix BBX) switched to the larger-displacement Cat 3126B ATAAC inline-six, rated near 95 kW (128 hp) net. Operating weight spans roughly 14,455-16,656 kg (31,867-36,720 lb) depending on bucket and configuration, with the WH waste-handler package the heaviest. Built from the mid-1990s into the mid-2000s, the 953C replaced the 953B and was itself replaced by the 953D. Caterpillar offered it with general-purpose and multi-purpose buckets, a waste-handler arrangement, forestry guarding, and a ripper-scarifier attachment.
Within the C-series itself, the biggest change is the engine swap tracked by the 2ZN-to-BBX serial break, paired with a widening of the standard track shoe from 380 mm (14.9 in) to 500 mm (19.7 in) and a 1998 cab and hydraulic-control update. Compared with the 953B it replaced, the 953C added a refined electronic hydrostatic drive; compared with the 953D that followed, it lacks the C6.6 ACERT common-rail engine and higher rated output. That serial-prefix split matters directly for parts sourcing today: engine, fuel-system, and hydrostatic components are not interchangeable between 2ZN and BBX machines, so confirm the prefix before ordering. Used 953C units remain common in forestry, landfill, and quarry fleets for their sealed-and-lubricated track undercarriage and hydrostatic maneuverability, and they trade across a wide price range depending on hours, configuration, and remaining undercarriage life.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 953C specifications
Engine
| Engine, early production | Cat 3116T inline-6 diesel, four-stroke, turbocharged, direct injection. Gross power 99 kW (133 hp); net flywheel power 90 kW (121 hp) at 2200 rpm (126 PS per DIN 70020). |
| Bore and stroke, 3116T | 105 mm x 127 mm (4.13 in x 5.00 in) |
| Displacement, 3116T | 6.6 L (403 in3) |
| Engine, later production | Cat 3126B ATAAC inline-6 diesel, turbocharged, air-to-air aftercooled. Net power 95 kW (128 hp) at 2000 rpm. |
| Bore and stroke, 3126B | 110 mm x 127 mm (4.33 in x 5.00 in) |
| Displacement, 3126B | 7.2 L (442 in3), roughly 9 percent more than the 3116 |
| Fuel system | Direct injection with individual, adjustment-free unit injectors per cylinder. Turbocharged air induction. Dual in-line fuel filters with water separator element. |
| Cold-weather starting | Standard air inlet heater for starting down to -18C (0F). Optional ether starting aid extends starting to -23C (-10F). |
| Emissions | Certified to the construction-equipment emissions rules in effect for the US, EU, and Japan at time of build. |
| Altitude derate | No power derate required up to 2300 m (7550 ft) altitude. |
| Engine generations note | The 953C nameplate spans two engine phases. Early-build machines carry the Cat 3116T; later-build machines carry the Cat 3126B ATAAC with greater displacement and power. Confirm engine family from the machine's own engine plate rather than assuming by year alone. |
Weights
| Operating weight, GP bucket, early production (3116T) | 14,452-14,677 kg (31,867-32,363 lb), depending on bucket edge protection |
| Operating weight, MP bucket, early production | 15,057-15,279 kg (33,201-33,690 lb) |
| Operating weight, GP bucket, later production (3126B) | 14,921-15,145 kg (32,895-33,389 lb) |
| Operating weight, MP bucket, later production | 15,463-15,687 kg (34,090-34,584 lb) |
| Operating weight, WH (Waste Handler) configuration | approximately 16,656 kg (36,720 lb) with the waste-handling bucket fitted |
| Operating weight basis | Includes coolant, lubricants, full fuel tank, ROPS cab, bucket, and 75 kg (165 lb) operator |
| Static tipping load, GP bucket | 9,550-10,689 kg (21,058-23,565 lb) across production era and edge option |
| Static tipping load, MP bucket | 8,486-10,265 kg (18,712-22,630 lb) |
| Weight change, canopy vs cab | Removing the cab for a ROPS canopy reduces operating weight by roughly 205-350 kg (452-551 lb), depending on production era |
| Weight change, ripper attachment | Adding the 3-shank ripper (rear bumper removed) adds roughly 67-376 kg (148-829 lb) depending on production era |
| Weight change, wide 500 mm (20 in) shoes | Adds about 291 kg (642 lb) over the narrower shoe |
Dimensions
| Overall length, GP bucket on ground | 5,879-6,299 mm (231.5-248 in), depending on bucket edge protection |
| Overall length, MP bucket on ground | 6,036-6,427 mm (237.6-253 in) |
| Overall height, bucket fully raised | 4,860-4,871 mm (191.4-192 in) |
| Machine height to top of cab | 3,084-3,160 mm (121-124.4 in), varies by production era |
| Height to bucket hinge pin | 3,585-3,600 mm (141.1-142 in) |
| Length to front of track | 4,308-4,350 mm (170-171.3 in) |
| Overall machine width without bucket, standard shoe | 2,180-2,300 mm (85.8-90.5 in); the shoe width fitted as standard changed across production, see Undercarriage note |
| Overall machine width without bucket, narrow shoe | 2,060 mm (81.1 in) with 380 mm (15 in) shoes fitted |
| Ground clearance | 383-410 mm (15.1-16.2 in) |
| Grading angle | 74 degrees, bucket-to-ground working angle for fine grading |
| Carry position approach angle | 15 degrees |
| SAE dump angle | 45 degrees standard, 56 degrees maximum |
| Maximum rollback at ground | 41-42 degrees |
| Maximum rollback at carry position | 48-50 degrees |
| Maximum rollback, fully raised | 56 degrees |
| Track gauge, standard configuration | 1,800 mm (71 in) |
| Track gauge, WH (Waste Handler) configuration | approximately 2,083 mm (82 in), widened for landfill stability |
| Track shoe width, standard | 380 mm (15 in) double grouser on early production; 500 mm (20 in) became the standard shoe on later production |
| Track shoe width, optional | Whichever width was not standard for a given production run was offered as the option (500 mm/20 in wide shoe early, 380 mm/15 in narrow shoe later). Other shoe styles include trapezoidal center-hole, single grouser, and rubber-pad grouser for paved-surface work. |
| Bucket width, GP | 2,380-2,438 mm (93.7-96.0 in), depending on edge protection |
| Bucket width, MP | 2,378-2,430 mm (93.6-95.7 in) |
| Digging depth | 96-181 mm (3.78-7.13 in), depending on bucket and edge option |
| Reach at full lift, 45-degree discharge | 949-1,637 mm (37.4-64.3 in), depending on bucket and edge option |
| Dump clearance at full lift, 45-degree discharge | 2,556-2,903 mm (100.6-114.3 in), depending on bucket and edge option |
Performance
| Drive system | Hydrostatic drive, electronically controlled (EHC). Two independent circuits, each a variable-displacement piston pump driving a variable-displacement piston motor, one circuit per track. |
| Travel speed | Infinitely variable, forward or reverse, from zero to top speed. Up to 10.0 km/h (6.2 mph) on early 3116T-powered production at 2200 rpm; later 3126B-powered production is commonly rated up to about 9.2 km/h (5.7 mph) at 2000 rpm. Varies by source and production run. |
| Operation modes | Work mode optimizes torque for digging and loading; travel mode optimizes top speed for longer moves |
| Steering | Foot-pedal control of each track independently, with counter-rotation for spot turns within the machine's own length |
| Drawbar pull | Not published in factory literature for this hydrostatic-drive loader |
| Gradeability | Not published as a percentage figure. Factory literature documents a 74-degree grading angle and the rollback/dump angles listed under Dimensions instead |
| Ground pressure, standard shoe, early production (380 mm/15 in) | 79.6 kPa (11.5 psi), GP bucket basis |
| Ground pressure, wide shoe, early production (500 mm/20 in) | 60.5 kPa (8.8 psi) |
| Ground pressure, standard shoe, later production (500 mm/20 in) | 65.8 kPa (9.5 psi) |
| Ground pressure, narrow shoe, later production (380 mm/15 in) | approximately 84 kPa (12.2 psi) |
| Ground pressure, WH configuration | approximately 71 kPa (10.3 psi) |
| Hydrostatic system relief valve | 420 bar (6,090 psi) |
| Equipment hydraulic pump flow | 130 L/min (34.3 gpm) at rated engine speed and 6900 kPa (1000 psi) |
| Equipment hydraulic relief pressure | 214 bar (3,103 psi) first stage; 240 bar (3,480 psi) second stage |
| Hydraulic cycle times | Raise 6.7 sec, dump 1.4 sec, lower empty (float down) 3.0 sec; total cycle about 9.7 sec |
| Breakout force, GP bucket, with tilt cylinders | 97.4-138.1 kN (21,896-31,046 lb), depending on bucket edge option and production era |
| Breakout force, MP bucket, with tilt cylinders | 86.4-107.1 kN (19,440-24,077 lb) |
Buckets
| Work tool note | The 953C is a track-type loader, not a dozer. No dozer blade is cataloged for this model. Standard work tools are General Purpose (GP) and Multi-Purpose (MP) buckets, with an optional 3-shank ripper/scarifier. |
| GP bucket, heaped capacity | 1.75-1.85 m3 (2.25-2.42 yd3), depending on edge protection |
| GP bucket, struck capacity | 1.45-1.55 m3 (1.9-2.03 yd3) |
| MP bucket, heaped capacity | 1.5-1.6 m3 (1.96-2.1 yd3) |
| MP bucket, struck capacity | 1.25-1.35 m3 (1.63-1.8 yd3) |
| Waste Handler (WH) bucket, heaped capacity | approximately 2.3 m3 (3 yd3) |
| Bucket edge protection options | Bare cutting edge, bolt-on teeth and segments, bolt-on reversible cutting edge, or (GP bucket only) flush-mounted weld-on adapters and tips |
| Ripper/scarifier attachment | Hinged 3-shank beam. Penetration 271 mm (10.7 in); ripping width 1,800 mm (70.9 in); ground clearance under tip 523 mm (20.6 in). |
| Special application work tools | Waste-handling guarding package for landfill and transfer-station work, shiphold-unloading package, Super Low Ground Pressure undercarriage arrangement, and forestry/woods guarding |
Service capacities summary
| Fuel tank | 234-235 L (62 gal) |
| Cooling system | 25-26 L (6.6-6.9 gal) |
| Engine oil, with filter | 18-21 L (4.8-5.5 gal); varies with engine, 3116T vs 3126B |
| Hydraulic system, total including tank | 104-110 L (27.5-29.1 gal) |
| Hydraulic tank only | 65-67 L (17.2-17.7 gal) |
| Final drive, each side | 15-16 L (4-4.1 gal) |
| Pump drive box | 3.8 L (1 gal) |
| Coolant | Cat Extended Life Coolant standard, with an extended service interval |
| Electrical system | 24V DC charging and starting system, 12V maintenance-free batteries, alternator in the 65-70 amp range |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
953C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) — Cat 3126B ATAAC | 18.2 L (4.8 US gal) | Cat DEO / DEO-ULS diesel engine oil (API CH-4/CI-4 class). SAE 10W-30 for ambient -18°C to 40°C (0°F to 104°F); SAE 15W-40 for warmer, steady ambient ranges. Pick grade from the OMM's oil viscosity-vs-temperature chart, not by season alone. |
| Cooling system | 26.2 L (6.9 US gal) | Cat ELC (Extended Life Coolant, meets ASTM D6210) or Cat DEAC (Diesel Engine Antifreeze/Coolant, meets ASTM D3306), mixed per the OMM concentration chart (typically 50/50 with water, adjusted for freeze protection). |
| Fuel tank | 234.7 L (62 US gal) | No. 2-D diesel fuel meeting Cat's fuel specification; switch to a winter-blend or No. 1-D fuel below freezing per the OMM cold-weather guidance. |
| Transmission / power train (powershift transmission, bevel gear and steering compartment) | Not broken out as a separate refill line on this model — the power train and hydraulic system share one combined circuit; see Hydraulic system row for the combined total. Varies by machine configuration/serial range. | Cat TDTO (Transmission/Drive Train Oil), TO-4 spec, same fluid family used across the hydraulic and power train circuit on this machine. Grade by ambient temperature per the OMM chart: SAE 10W for cold climates, SAE 30 for moderate climates, SAE 50 for hot climates. |
| Final drives (each side) | 15.6 L (4.1 US gal) per side | Cat TDTO, TO-4 spec, typically SAE 50 grade in temperate/warm service; select grade per the OMM ambient-temperature chart. |
| Hydraulic system / tank (equipment, power train and tank combined) | Tank only: 67.1 L (17.7 US gal). Full hydraulic system incl. power train: 110.2 L (29.1 US gal) | Cat TDTO, TO-4 spec — this machine runs power train and implement hydraulics from one shared circuit rather than separate hydraulic and transmission fluids. Grade by climate per the OMM chart: SAE 10W cold, SAE 30 moderate, SAE 50 hot. |
| Pivot shaft (oil-filled) | 0.8 L (0.2 US gal) | Cat TDTO, TO-4 spec, matched to the power train/hydraulic fill grade. Capacity is single-sourced — verify against the OMM for your serial-number range. |
| Pump drive box | 3.8 L (1 US gal) | Cat TDTO, TO-4 spec. Capacity is single-sourced — verify against the OMM for your serial-number range. |
| Grease points (track/pivot pins, cylinder pins, linkage) | Not a refill-volume item; apply per the OMM lubrication interval chart | Cat Advanced 3Moly Grease (NLGI 2) for general-purpose pin and pivot lubrication across a wide temperature range. Cat Arctic Platinum Grease for extreme cold, roughly below -20°C (-4°F). Cat Extreme Application (XA) grease for high-load, extreme-pressure points. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 953C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 953C beyond the schedule
Predictive Maintenance & Fluid Analysis
The 953C shares one pressurized tank between the hydrostatic drive and the implement hydraulic circuit, so S.O.S sampling from that tank flags pump, motor, and valve wear early. Pull engine oil samples at every oil change and compare wear-metal trends against the correct block: 3116/3116T machines (2ZN prefix) show different turbo-bearing signatures than 3126B ATAAC units (BBX prefix). Sample final-drive oil and coolant on the same interval to catch seal or gasket leakage before it becomes a teardown.
Corrective & Common Repairs
Most field repairs on the 953C center on the electronic hydrostatic drive: loss of straight-line travel or sluggish response usually traces to EHC calibration, a worn charge pump, or a leaking case-drain line rather than the final drives themselves. Loader linkage and bucket pivot pins wear quickly under waste-handling or forestry duty and need bushing replacement before excess play develops. On 3116T-powered early machines, check turbocharger shaft play and boost leaks if power falls off; on 3126B units, check the ATAAC aftercooler circuit for restriction.
Overhaul & Rebuild Points
Track chain, rollers, idlers, and sprocket segments are the highest-wear items on the 953C's sealed-and-lubricated undercarriage and should be measured against service limits at every major inspection rather than swapped on a fixed schedule. Hydrostatic pumps and drive motors are the next most common rebuild, usually driven by oil-analysis trends rather than a fixed hour number. Engine top-end work, including valves, injectors, and the turbocharger on 3116T units, typically comes due around mid-life hours, with inframe or full overhaul following compression and oil-analysis trends.
Seasonal & Environment Servicing
Before cold weather, check extended-life coolant concentration, confirm block heater operation, and consider a lower-viscosity hydrostatic/hydraulic oil grade since the drive and implement circuits share one tank. In hot, dusty quarry or landfill work, shorten air filter and radiator/hydraulic-cooler cleaning intervals and inspect Woods or waste-handling guarding for buildup that traps heat. In wet or muddy ground, wash the undercarriage after each shift to protect the sealed track pins and bushings, and check final drive seals whenever the machine works in standing water.
953C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 179-9348 | Valve-Drain | Fuel system service | Check fitment → |
| 6I-0273 | Filter Element As-Air | Air intake service | Check fitment → |
| 116-7376 | Filter Element-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
953C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 030-096 (FMI 03) | Monitoring system: fuel level sender circuit voltage above normal | Open circuit or short to battery voltage in the fuel level sender wiring, connector corrosion, or a failed sender | Inspect sender wiring and connector for damage or corrosion; check sender resistance against spec; repair the harness or replace the sender |
| 030-271 (FMI 05) | Monitoring system: action alarm (travel alarm) circuit current below normal / open circuit | Open circuit in the alarm wiring, a blown alarm horn, or a disconnected connector | Check alarm wiring and connector continuity, test the horn itself, repair the open circuit or replace the horn |
| 079-136 (FMI 08) | Hydrostatic transmission control: drive-motor pilot pressure sensor signal has abnormal frequency, pulse width, or period | Faulty pressure sensor, damaged sensor wiring, a loose connector, or a transmission control module fault | Inspect sensor wiring and connector, check the sensor's duty-cycle output with a diagnostic tool, replace the sensor if out of spec |
| 079-137 (FMI 08) | Hydrostatic transmission control: drive-motor pilot pressure sensor (opposite drive circuit) signal has abnormal frequency, pulse width, or period | Same as the paired 079-136 code: faulty sensor, damaged wiring, loose connector, or control module fault on that side's circuit | Inspect sensor wiring and connector, check sensor output signal, replace the sensor if out of spec |
| 079-299 (FMI 04) | Hydrostatic transmission control: transmission lever (speed and direction) position sensor voltage below normal / shorted low | Sensor wiring shorted to ground, a failed lever position sensor, or loss of calibration | Check lever position sensor wiring for shorts to ground, recalibrate or replace the sensor per the transmission control procedure |
| 030-600 (FMI 08) | Monitoring system: hydraulic oil temperature sensor signal has abnormal frequency, pulse width, or period | Faulty hydraulic oil temperature sensor or damaged sensor wiring/connector | Inspect sensor and wiring, verify sensor output against spec, replace the sensor if faulty |
| 030-819 (FMI 02) | Monitoring system: display data link signal erratic, intermittent, or incorrect | Poor connection or corrosion in the data link wiring between the monitor display and other control modules, or a weak ground | Inspect data link wiring and connectors for corrosion or damage, check module grounds, repair as needed |
| 030-248 (FMI 02) | Cat Data Link signal erratic, intermittent, or incorrect between electronic control modules | Damaged data link harness or connectors, poor module grounds, or a communication fault between modules | Inspect the Cat Data Link harness and connectors across modules, check grounds, repair or replace damaged wiring |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
953C attachments & work tools
Blades
The 953C is a track loader, not a dozer; Caterpillar factory literature does not catalog S, SU, A, or VPAT dozer blades for this model, since that lineup belongs to Cat track-type tractors. Dealers list a Straight Trim Blade as an available work tool alongside the buckets, but no published width or capacity is given for it. The standard Multi-Purpose (MP) bucket doubles as a blade for stripping, bulldozing, and fine grading, combining bucket, dozer-blade, and clamp function in one tool, rated around 1.5-1.6 m3 (2.0-2.1 yd3) depending on GET fitted.
Rippers
Only one ripper-scarifier layout is cataloged for the 953C: a radial, hinged three-shank beam mounted on two pins pressed into each side of the mainframe, raised and lowered by two wide-mounted cylinders, with a six-pin linkage that needs no lubrication. No single-shank option is offered for this class. Ripping width runs about 1800 mm (70.9 in) with roughly 270-290 mm (10.6-11.4 in) penetration and 507-523 mm (20-20.6 in) ground clearance; figures vary slightly across factory literature vintages. Fitting the ripper (rear bumper removed) changes operating weight by roughly 67-376 kg (148-829 lb) depending on source and bucket combination fitted - varies by configuration/series rather than one fixed number.
Winches
Standard and optional equipment lists for the 953C do not include a factory-cataloged winch; the equipment hydraulics and controls are built around bucket and ripper work, not a winch drum. A documented historical production run fitted roughly 50 953C units with an Allied Power Products winch package on the rear, alongside separate standard and ripper-equipped batches, reading as a special or limited configuration rather than a listed dealer option. Treat any towing-winch fitment on a 953C as a non-catalog, application-specific arrangement and verify against dealer records for that serial range.
Drawbars/counterweights
A drawbar hitch is a factory option on the 953C, adding roughly 30 kg (66 lb) to operating weight per earlier-production literature; later literature lists the same option without a published weight change. Two counterweight arrangements - light and heavy - are cataloged as options for rebalancing the machine when heavier rear-mounted tools such as a ripper are fitted. The rear-mounted engine itself also serves as a working counterweight by design, which is why removing the rear bumper or swapping the ROPS cab for a canopy measurably shifts operating weight and static tipping load in the spec tables.
Cab/ROPS guarding (forestry/waste)
Standard cab is a sound-suppressed, pressurized ROPS/FOPS unit; a ROPS canopy (cab removed) is the lighter alternative, cutting operating weight by roughly 205-350 kg (452-732 lb) depending on brochure vintage. For forestry or clearing work, Caterpillar offers Woods Guarding: full sweeps protecting the front, top, and rear of the machine plus 360-degree screen coverage and an added radiator guard. Waste-handling arrangements use separate, heavier guarding described as roughly double the thickness of standard guarding, plus protective covers for hydraulic lines, fenders, and final-drive housings - a distinct package from the forestry sweep guarding.
Hydraulic arrangement (front/rear tools)
Equipment hydraulics run off a vane-type pump mounted on the hydrostatic pump-drive housing, feeding standard two-valve (lift/tilt) circuits through pilot-operated controls; a single-lever pilot control is standard for bucket lift and dump, with two-lever control optional. For rear-mounted tools like the ripper, Cat offers an optional 3rd valve with lines for front or rear attachments, plus an optional diverter valve for when both front and rear lines are needed at the same time; an optional pilot-operated control lever for the ripper or multi-purpose bucket is also available at the console. Two relief-valve stages on the equipment circuit support simultaneous lift-and-dump for fast truck loading alongside the extra rear-tool circuit.
All 953C assemblies by section
Every catalogued assembly group for the Caterpillar 953C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
176-9874 Aftercooler Gp
| 13***67 | Grommet | 1 |
| 17***74 | Aftercooler Group | 1 |
| 18***79 | Aftercooler As | 1 |
189-5288 Air Cleaner Gp
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 18***88 | Air Cleaner Group | 1 |
| 4P***24 | Seal-O-Ring | 1 |
176-9873 Air Cleaner Gp
| 12***46 | Precleaner Group | 1 |
| 13***64 | Bracket As | 1 |
| 17***73 | Air Cleaner Group | 1 |
189-8779 Cover Gp-Air Inlet -Starting Aid Heater
| 18***79 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 24***95 | Insulator; (Air Inlet Heater) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
294-7675 Cover Gp-Air Inlet
| 24***95 | Insulator; (Air Inlet Heater) | 1 |
| 29***75 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
189-8780 Cover Gp-Air Inlet -Starting Aid Heater
| 18***80 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 29***75 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
288-0973 Cover Gp-Air Inlet
| 24***95 | Insulator; (Air Inlet Heater) | 1 |
| 28***73 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
153-1794 Cover Gp-Air Inlet -Engine
| 15***94 | Cover Group-Air Inlet; -Engine | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 20***69 | Cover-Air Inlet | 1 |
246-3523 Elbow Gp-Air Inlet -Engine
| 13***26 | Stud; (M8x1.25x110-mm, M8x1.25x17-mm) | 4 |
| 14***95 | Plug As | 1 |
| 17***74 | Elbow | 1 |
170-3273 Elbow Gp-Air Inlet -Engine
| 13***26 | Stud; (M8x1.25x110-mm, M8x1.25x17-mm) | 4 |
| 17***73 | Elbow Group-Air Inlet; -Engine | 1 |
| 17***74 | Elbow | 1 |
176-9875 Lines Gp-Air
| 10***52 | Hose | 1 |
| 14***67 | Clamp; (Hose) | 4 |
| 17***75 | Lines Group-Air | 1 |
176-9870 Lines Gp-Air
| 17***70 | Lines Group-Air | 1 |
| 18***89 | Hose | 1 |
| 19***47 | Tube | 1 |
183-6845 Manifold Gp-Exhaust
| 17***98 | Bolt-Flange Head; (M10x1.5-Thd) | 8 |
| 18***45 | Manifold Group-Exhaust; -Dry | 1 |
| 18***54 | Manifold-Exhaust; (Center) | 1 |
231-5806 Mounting Gp-Muffler
| 22***42 | Bracket As | 1 |
| 23***06 | Mounting Group-Muffler | 1 |
| 7V***15 | Spacer; (11x26.7x12-mm Thk) | 8 |
254-5021 Muffler
| 25***21 | Muffler | 1 |
176-9868 Muffler Gp
| 17***68 | Muffler Group | 1 |
| 20***21 | Muffler As | 1 |
| 20***22 | Bracket As | 1 |
229-3774 Precleaner Ar
| 13***79 | Precleaner Group; -Turbine | 1 |
| 15***76 | Kit-Screen; (Turbine Precleaner) | 1 |
| 15***81 | Precleaner As; (S) | 1 |
229-8482 Precleaner Ar
| 13***79 | Precleaner Group; -Turbine | 1 |
| 15***76 | Kit-Screen; (Turbine Precleaner) | 1 |
| 15***81 | Precleaner As; (S) | 1 |
121-7746 Precleaner Gp
| 12***46 | Precleaner Group | 1 |
| 13***43 | Clamp-Hose | 1 |
| 1M***50 | Bowl | 1 |
190-3942 Turbocharger Gp
| 15***72 | Clamp As; (Compressor) | 1 |
| 19***42 | Turbocharger Group | 1 |
| 19***65 | Housing | 1 |
187-1603 Turbocharger Gp
| 15***72 | Clamp As; (Compressor) | 1 |
| 18***03 | Turbocharger Group | 1 |
| 19***65 | Housing | 1 |
186-0633 Turbocharger Gp
| 18***33 | Turbocharger Group | 1 |
| 19***42 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
Basic Engine
193-1031 Belt Gp-Serpentine -Without Air Conditioner
| 19***31 | Belt Group-Serpentine; -Without Air Conditioner | 1 |
| 22***38 | Belt-Serpentine; (Without Air Conditioner) | 1 |
193-1030 Belt Gp-Serpentine -With Air Conditioner
| 19***30 | Belt Group-Serpentine; -With Air Conditioner | 1 |
| 22***36 | Belt-Serpentine; (With Air Conditioner) | 1 |
189-2221 Belt Tightener Gp
| 18***21 | Belt Tightener Group | 1 |
| 19***43 | Belt Tensioner | 1 |
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 1 |
210-2610 Bracket Gp-Mounting
| 21***10 | Bracket Group-Mounting | 1 |
| 23***46 | Bracket As | 1 |
| 4P***81 | Clip (For Use With 7.9mm Wide Tie Wrap) | 4 |
216-7922 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 20***22 | Gear-Camshaft; (100-Teeth), Name-Plate (Swedish) | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
210-5598 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 15***14 | Tee As | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
153-1832 Cover Gp-Valve Mechanism
| 15***32 | Cover Group-Valve Mechanism | 1 |
| 16***61 | Cover As-Base | 1 |
| 23***01 | Cover As; (Top) | 1 |
113-6087 Crankshaft Gp
| 10***08 | Bearing-Main; (Standard) | 6 |
| 11***87 | Crankshaft Group | 1 |
| 14***62 | Bearing; (0.25mm Undersize) | 0 |
129-1165 Cylinder Block Gp
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 12***65 | Cylinder Block Group | 1 |
| 18***09 | Plug As; (High Temperature) | 1 |
221-4481 Cylinder Block Gp
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
| 22***80 | Cylinder Block Group | 1 |
| 22***81 | Cylinder Block Group | 1 |
221-4480 Cylinder Block Gp
| 22***80 | Cylinder Block Group | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 14 |
| 7E***68 | Cap-Crankshaft Bearing | 7 |
227-5951 Cylinder Head As
| 14***18 | Insert-Valve Seat; (Exhaust, Standard) | 6 |
| 15***25 | Setscrew; (3/8-16) | 6 |
| 18***82 | Insert-Valve Seat; (0.127-mm Os Od, Exhaust) | 0 |
205-1271 Cylinder Head As
| 14***18 | Insert-Valve Seat; (Exhaust, Standard) | 6 |
| 15***25 | Setscrew; (3/8-16) | 6 |
| 15***04 | Insert-Valve Seat; (Standard, Inlet) | 12 |
278-3490 Cylinder Head As
| 14***18 | Insert-Valve Seat; (Exhaust, Standard) | 6 |
| 15***25 | Setscrew; (3/8-16) | 6 |
| 18***82 | Insert-Valve Seat; (0.127-mm Os Od, Exhaust) | 0 |
227-5952 Cylinder Head As
| 13***15 | Seat-Valve Spring | 6 |
| 14***70 | Guide-Valve; (Standard, Inlet) | 12 |
| 14***14 | Seal-Valve Stem; (Inlet) | 12 |
205-1272 Cylinder Head As
| 10***29 | Seal-Valve Stem | 6 |
| 13***15 | Seat-Valve Spring | 6 |
| 14***70 | Guide-Valve; (Standard, Inlet) | 12 |
205-1275 Cylinder Head Gp
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 20***73 | Cylinder Head Group | 1 |
| 20***75 | Cylinder Head Group | 1 |
133-3742 Cylinder Head Gp
| 13***42 | Cylinder Head Group | 1 |
| 13***95 | Gasket-Cylinder Head | 1 |
| 13***52 | Bolt-12 Point Head; (M20x2.5x170mm) | 14 |
227-5953 Cylinder Head Gp
| 13***83 | Retainer-Spring | 6 |
| 13***15 | Seat-Valve Spring | 6 |
| 13***18 | Spring-Valve; (Exhaust) | 6 |
205-1274 Cylinder Head Gp
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 20***73 | Cylinder Head Group | 1 |
| 20***74 | Cylinder Head Group | 1 |
227-5954 Cylinder Head Gp
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 22***53 | Cylinder Head Group | 1 |
| 22***54 | Cylinder Head Group | 1 |
205-1273 Cylinder Head Gp
| 10***29 | Seal-Valve Stem | 6 |
| 13***83 | Retainer-Spring | 6 |
| 13***15 | Seat-Valve Spring | 6 |
189-2227 Damper & Pulley Gp
| 16***21 | Damper Assem. | 1 |
| 18***27 | Damper & Pulley Group | 1 |
| 18***33 | Pulley-Crankshaft | 1 |
219-6339 Drain Gp-Engine Oil -Extension
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 21***39 | Drain Group-Engine Oil; -Extension | 1 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 1 |
7c-4532 Drain Gp-Engine Oil -Shutoff Valve
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
| 7C***32 | Drain Group-Oil Pan; Oil Pan Drain Group | 1 |
189-2223 Drive Gp-Fan -Belt
| 09***35 | Spacer; (11x22x5-mm Thk) | 1 |
| 18***03 | Drive Group-Fan | 1 |
| 18***23 | Drive Group-Fan; -Belt | 1 |
189-2203 Drive Gp-Fan
| 12***71 | Cone | 2 |
| 12***72 | Cup | 2 |
| 18***03 | Drive Group-Fan | 1 |
116-4556 Fastener Gp-Front Housing
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***36 | Bolt; (M12x1.75x70-mm) | 6 |
193-1592 Flywheel Gp
| 18***95 | Flywheel As | 1 |
| 19***92 | Flywheel Group | 1 |
| 3E***13 | Pin-Spring | 1 |
205-1321 Gear Gp-Front
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
| 11***19 | Plate-Retaining | 1 |
4w-1103 Housing Gp-Flywheel
| 10***51 | Housing-Flywheel | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 2P***94 | Plug-Sealing | 1 |
133-5055 Housing Gp-Front
| 12***83 | Housing-Front | 1 |
| 13***55 | Housing Group-Front | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
139-4081 Lifter Gp-Valve
| 13***81 | Lifter Group-Valve; -Mechanism | 1 |
| 13***84 | Spacer; (15.9x24x6-mm Thk) | 2 |
| 13***76 | Shaft As-Lifter | 1 |
246-3551 Lifting Gp-Engine
159-2565 Lifting Gp-Engine
| 15***65 | Lifting Group-Engine | 1 |
| 20***38 | Lifting Assem. | 1 |
| 23***69 | Plate-Lifting | 1 |
176-9872 Mounting Gp-Engine & Xmsn
| 10***26 | Plate-Seal | 2 |
| 11***10 | Support As | 1 |
| 17***72 | Mounting Group-Engine & Xmsn | 1 |
246-3550 Mounting Gp-Fan Drive
| 22***15 | Stud; (M10x1.5x30-mm) | 2 |
| 24***32 | Bracket | 1 |
| 24***50 | Mounting Group-Fan Drive | 1 |
189-2222 Mounting Gp-Fan Drive
| 18***94 | Bracket As | 1 |
| 18***22 | Mounting Group-Fan Drive | 1 |
| 22***15 | Stud; (M10x1.5x30-mm) | 2 |
4w-0269 Pan Gp-Oil -Engine
| 11***77 | Pan-Oil | 1 |
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 26***16 | Gasket-Oil Pan; (Engine) | 1 |
177-7500 Piston & Rod Gp
| 16***24 | Pin-Piston | 1 |
| 17***43 | Jet As-Piston Cooling | 1 |
| 17***00 | Piston & Rod Group | 1 |
159-0303 Plug Gp-Cylinder Block
| 14***09 | Plug As-Sto | 2 |
| 15***03 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
162-8068 Plug Gp-Engine
| 14***95 | Plug As | 1 |
| 16***68 | Plug Group-Engine; -Oil Gallery | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
123-8395 Pulley As-Idler
| 12***95 | Pulley As-Idler | 1 |
| 12***90 | Bolt; (M10x1.5) | 1 |
| 12***91 | Cover-Dust | 1 |
189-2196 Pulley Gp-Fan & Alt Drive
| 12***58 | Pulley-Alternator; (8-Groove) | 1 |
| 18***96 | Pulley Group-Fan & Alt Drive | 1 |
| 22***21 | Pulley-Fan; (8-Groove) | 1 |
198-6083 Pulley Gp-Fan & Alt Drive
| 12***58 | Pulley-Alternator; (8-Groove) | 1 |
| 19***83 | Pulley Group-Fan & Alt Drive | 1 |
| 19***84 | Pulley-Fan | 1 |
246-3549 Pulley Gp-Idler
| 14***01 | Cover-Dust; (Rear) | 1 |
| 15***98 | Spacer; (10.4x38.1x20-mm Thk) | 1 |
| 15***00 | Bolt; (M10x1.5x54.25-mm) | 1 |
189-2220 Pulley Gp-Idler
| 14***01 | Cover-Dust; (Rear) | 1 |
| 15***98 | Spacer; (10.4x38.1x20-mm Thk) | 1 |
| 15***00 | Bolt; (M10x1.5x54.25-mm) | 1 |
256-3834 Rocker Arm Gp -Inlet
| 25***34 | Rocker Arm Group; -Inlet | 1 |
| 25***35 | Rocker Arm As; (Inlet) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
256-3831 Rocker Arm Gp -Exhaust
| 25***31 | Rocker Arm Group; -Exhaust | 1 |
| 25***32 | Rocker Arm As; (Exhaust) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
115-4203 Seal Gp-Crankshaft
| 11***03 | Seal Group-Crankshaft | 1 |
| 22***09 | Seal Group-Crankshaft; (Rear) | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
177-0010 Support Gp-Engine
| 17***10 | Support Group-Engine | 1 |
| 17***11 | Support | 2 |
| 5P***46 | Washer-Hard; (15.5x29x3-mm Thk) | 8 |
135-2969 Valve Mechanism Gp
| 13***79 | Rod-Valve Push; (Valve Push) | 12 |
| 13***69 | Valve Mechanism Group | 1 |
| 13***81 | Lifter Group-Valve; -Mechanism | 3 |
235-5528 Valve Mechanism Gp
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
256-3830 Valve Mechanism Gp
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
Cooling System
117-3643 Cooler Gp-Engine Oil
| 11***43 | Cooler Group-Engine Oil | 1 |
| 23***55 | Gasket | 1 |
| 26***43 | Core As-Engine Oil Cooler | 1 |
176-9867 Fan Gp-Blower
| 09***49 | Bolt; (M8x1.25x40-mm) | 6 |
| 17***67 | Fan Group-Blower | 1 |
| 18***11 | Adapter | 1 |
267-8793 Fan Gp-Blower
| 25***95 | Spider As-Fan; (9-Blade) | 1 |
| 25***41 | Guard As; (Lh) | 1 |
| 25***42 | Guard As; (Rh) | 1 |
246-3546 Lines Gp-Water
| 12***66 | Gasket | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 13***12 | Gasket-Water Regulator; (Temperature Regulator Housing) | 1 |
159-1814 Lines Gp-Water
| 01***24 | Bushing To Supply Port | 1 |
| 12***66 | Gasket | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
188-2500 Mounting Gp-Radiator
| 13***34 | Spacer; (11x20x25-mm Thk) | 4 |
| 15***70 | Washer; (16.5x65x3-mm Thk) | 4 |
| 17***11 | Locknut; (M16x2-Thd) | 2 |
193-9237 Pump Gp-Water
| 14***95 | Plug As | 2 |
| 14***09 | Plug As-Sto | 2 |
| 16***19 | Plug As | 1 |
193-9238 Pump Gp-Water
| 11***37 | Pulley; (8-Groove) | 1 |
| 11***25 | Filter; (Water)(Pump) | 1 |
| 12***70 | Shaft Assem. | 1 |
236-4413 Pump Gp-Water
| 11***37 | Pulley; (8-Groove) | 1 |
| 11***25 | Filter; (Water)(Pump) | 1 |
| 12***70 | Shaft Assem. | 1 |
176-9869 Radiator Gp
| 11***60 | Cap-Radiator | 1 |
| 17***69 | Radiator Group | 1 |
| 18***98 | Hose-Radiator; (Upper) | 1 |
230-4811 Radiator Gp -Waste Handling
| 23***11 | Radiator Group; -Waste Handling | 1 |
| 23***62 | Core As-Radiator | 1 |
Electrical And Starting System
3e-6328 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
185-5294 Alternator Gp-Charging
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***42 | Stator Assem. | 1 |
208-6940 Alternator Gp-Charging
| 18***94 | Alternator Group-Charging; -Waste Handling | 1 |
| 19***01 | Bracket As-Alternator | 1 |
| 1F***48 | Nut 12.70 mm(.50 In.) Thread | 1 |
262-4286 Battery & Wiring Gp
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 3 |
| 03***97 | Boot | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
176-9769 Battery & Wiring Gp
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 3 |
| 03***97 | Boot | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
8r-8714 Battery Gp -Maintenance Free
| 8R***14 | Battery Group; -Maintenance Free | 1 |
| 9X***04 | Battery-Maintenance Free; (12 Volt)(900 Amp) | 2 |
233-4825 Control & Mtg Gp-Engine Elek
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 20***01 | Control Group-Engine Electronic | 1 |
| 23***25 | Control & Mtg Group-Engine Elek | 1 |
209-6417 Control Gp-Communication -Product Link 201
| 16***14 | Control Group-Unprogrammed; -Product Link 201 | 1 |
| 20***17 | Control Group-Communication; -Product Link 201 | 1 |
| 23***87 | Software Group-Communication; (Product Link 151) | 1 |
242-7205 Control Gp-Communication -Product Link 201
| 16***14 | Control Group-Unprogrammed; -Product Link 201 | 1 |
| 23***40 | Film; (Warning) (Product Link, Ansi) (On Lh Front Post Inside Cab) | 1 |
| 23***41 | Film-Warning; (Product Link Radio, Intl) | 1 |
8c-9759 Control Gp-Bucket Positioner
| 25***97 | Film-Identification; (Solenoid Valve)(Solenoid, Bucket Positioner) | 1 |
| 7N***82 | Housing (Plug) (To Lift Kickout Switch) | 1 |
| 8C***59 | Control Group-Electronic; (Bucket Positioner) | 1 |
322-3602 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 32***02 | Control Group-Engine Electronic | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
206-2701 Control Gp-Engine Electronic
| 20***01 | Control Group-Engine Electronic | 1 |
| 32***02 | Control Group-Engine Electronic | 1 |
206-2700 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 20***00 | Control Group-Engine Electronic | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
8c-9763 Control Gp-Lift Kickout
| 25***97 | Film-Identification; (Solenoid Valve)(Solenoid, Bucket Positioner) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
156-6155 Control Gp-Unprogrammed -Security
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***55 | Control Group-Unprogrammed; -Machine Security System | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
172-9389 Control Gp-Unprogrammed -Power Train
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 17***89 | Control Group-Unprogrammed; -Steering, Transmission | 1 |
239-9954 Control Gp-Unprogrammed -Product Link 300
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 23***54 | Control Group-Unprogrammed; (Product Link 300)(Product Link 321sr) | 1 |
168-7314 Control Gp-Unprogrammed -Product Link 201
| 16***14 | Control Group-Unprogrammed; -Product Link 201 | 1 |
| 17***39 | Screw; (8-32x0.5-In) | 4 |
| 3B***01 | Lockwasher (Part Of 3f***99 Switch) | 1 |
175-7281 Electronics Ar-Machine
| 17***81 | Electronics Ar-Machine | 1 |
| 19***57 | Electronics Group-Monitor | 1 |
| 19***88 | Electronics Group-Power Train | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
262-2043 Electronics Gp-Communication -Product Link 300
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 26***43 | Electronics Group-Communication; -Product Link 300 | 1 |
207-5262 Electronics Gp-Machine -Security
| 15***55 | Control Group-Unprogrammed; -Machine Security System | 1 |
| 20***62 | Key As-Electronic; (Security) | 2 |
| 20***65 | Key As-Electronic; (Security)(Blank) | 2 |
199-5995 Electronics Gp-Machine -Security
| 19***95 | Electronics Group-Machine; -Security | 1 |
| 20***62 | Electronics Group-Machine | 1 |
| 24***64 | Software Group-Machine; (Security) | 1 |
194-3257 Electronics Gp-Monitor
| 19***57 | Electronics Group-Monitor | 1 |
| 25***34 | Software Group-Monitor; (Caterpillar Monitoring System) | 1 |
| 25***35 | Service Group-Monitor | 1 |
194-3688 Electronics Gp-Power Train
| 19***88 | Electronics Group-Power Train | 1 |
| 27***46 | Software Group-Power Train | 1 |
| 27***47 | Service Group-Power Train | 1 |
198-9202 Fastener Gp-Engine Wiring
| 19***02 | Fastener Group-Engine Wiring | 1 |
| 4P***81 | Clip (For Use With 7.9mm Wide Tie Wrap) | 2 |
| 4P***34 | Clip-Ladder; (00800 mm ) | 2 |
9x-3294 Heater Gp-Jacket Water
| 12***86 | Element As-Jacket Water Heater; (120-Volt, 1000-Watt) | 1 |
| 13***48 | Kit-Seal; (Jacket Water Heater) | 1 |
| 6N***04 | Cap As-Dust; (Jacket Water Heater Elements) | 1 |
3t-8724 Heater Gp-Jacket Water
| 24***27 | Element As-Jacket Water Heater; (240-Volt, 1000-Watt) | 1 |
| 24***30 | Cord As-Heater | 1 |
| 3T***24 | Heater Group-Jacket Water | 1 |
187-7683 Installation Ar-Communication -Product Link
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***98 | Plate | 2 |
| 17***72 | Harness As-Control; (Product Link) | 1 |
273-5723 Installation Gp-Communication -Product Link 321sr
| 12***78 | Locknut; (M6x1-Thd) | 8 |
| 23***40 | Film; (Warning) (Product Link, Ansi) (On Lh Front Post Inside Cab) | 1 |
| 23***41 | Film-Warning; (Product Link Radio, Intl) | 1 |
273-5725 Installation Gp-Communication -Product Link 300
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 25***01 | Plate | 2 |
| 25***04 | Harness As-Control; (Product Link) | 1 |
260-0613 Installation Gp-Communication -Product Link 321sr
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***74 | Cover-Connector; (Wire Router) | 1 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
183-7012 Installation Gp-Security
| 10***25 | Clip | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
230-5825 Installation Gp-Security
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***55 | Lamp As; (24-Volt)(Security System) | 1 |
156-7106 Kit-Injector Wiring Harness
| 15***50 | Wire As | 1 |
| 15***06 | Kit-Injector Wiring Harness | 1 |
133-6336 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
242-3517 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
| 16***56 | Bracket; (Lamp Retaining) | 1 |
219-6486 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
174-9556 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
| 16***56 | Bracket; (Lamp Retaining) | 1 |
219-6488 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
174-9557 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
| 16***56 | Bracket; (Lamp Retaining) | 1 |
272-6641 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
135-5549 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***49 | Lamp Group-Flood; -Cab Front | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
110-7563 Lamp Gp-Warning Beacon
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
226-3314 Lighting Gp-Flood
| 12***51 | Guard; (Front, Lh)(Lh) | 1 |
| 12***54 | Guard; (Front, Rh)(Rh) | 1 |
| 13***69 | Guard As-Front-Rh | 1 |
180-8525 Lighting Gp-Flood -Front, Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***64 | Bracket As (Each Includes) | 2 |
| 12***51 | Guard; (Front, Lh)(Lh) | 1 |
183-7013 Lighting Gp-Warning Beacon
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 14***01 | Grommet | 1 |
| 18***13 | Lighting Group-Warning Beacon | 1 |
274-9060 Lighting Gp-Warning Beacon
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 27***60 | Lighting Group-Warning Beacon | 1 |
183-6482 Panel Gp-Circuit Breaker
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***30 | Strap As | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
199-7734 Sensor Gp-Engine
| 03***16 | Elbow; (Pipe) | 1 |
| 16***23 | Plug As | 1 |
| 16***61 | Plug As | 1 |
239-9957 Sensor Gp-Liquid Level
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 23***57 | Sensor Group-Liquid Level; -Coolant Loss | 1 |
214-4863 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
| 21***63 | Sensor Group-Position; -Rotary-Tc Impeller Clutch, Lh Pedal | 1 |
194-6725 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
134-0420 Sensor Gp-Pressure
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 13***20 | Sensor Group-Pressure; -Powershift | 1 |
194-6723 Sensor Gp-Pressure
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 19***23 | Sensor Group-Pressure; -Turbocharger Outlet | 1 |
224-4536 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 1 |
239-2396 Sensor Gp-Pressure
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***96 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
178-3082 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***82 | Sensor Group-Pressure; -Transmission Clutch Latching | 1 |
| 17***44 | Sensor As-Pressure; (Transmission Clutch Latching) | 1 |
247-0302 Sensor Gp-Pressure
| 19***23 | Sensor Group-Pressure; -Turbocharger Outlet | 1 |
| 24***02 | Sensor Group-Pressure; -Turbocharger Outlet | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
236-6220 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 23***20 | Sensor Group-Pressure; -Injection Actuation | 1 |
236-6221 Sensor Gp-Speed -Engine Timing
| 23***21 | Sensor Group-Speed; -Engine Timing | 1 |
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
193-2550 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***49 | Strap; (Marker) | 1 |
| 19***50 | Sensor Group-Speed; -Tmsn, Torque Converter Output | 1 |
189-5746 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 17***49 | Strap; (Marker) | 1 |
274-7396 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
| 27***96 | Sensor Group-Temperature; -Engine Coolant | 1 |
191-6587 Sensor Gp-Temperature
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 15***61 | Wedge-Plug Lock; (2-Pin) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
197-8392 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 1 |
| 19***92 | Sensor Group-Temperature; -Coolant, Water | 1 |
274-7395 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
197-8391 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
134-2252 Sensor Gp-Temperature
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***52 | Sensor Group-Temperature; -Transmission Oil-Xmsn, Torque Converter | 1 |
| 3E***71 | Wedge; (Receptacle Lock) (3 Pin) | 1 |
204-0320 Sensor Gp-Temperature
| 19***87 | Sensor Group-Temperature; -High Pressure Oil | 1 |
| 20***20 | Sensor Group-Temperature; -Engine Oil | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
118-7284 Starting Aid Gp -Air Inlet
| 11***84 | Starting Aid Group; -Air Inlet Heater | 1 |
| 15***37 | Heater As-Air Inlet; (22-Volt, 1892-Watt)(Starting Aid) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
207-1517 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
111-4275 Starting Motor Gp-Electric
| 11***75 | Starting Motor Group-Electric; (Cold Weather) | 1 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
223-7577 Switch Gp-Magnetic -Air Inlet Heater Relay
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
167-0138 Switch Gp-Magnetic -Main Relay
| 15***61 | Wedge-Plug Lock; (2-Pin) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
209-5582 Switch Gp-Magnetic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 2 |
241-8368 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
125-1302 Switch Gp-Magnetic -Start Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
158-6632 Switch Gp-Push Button -Horn
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***32 | Switch Group-Push Button; -Horn-Fuel Priming Pump | 1 |
| 2H***22 | Lockwasher | 1 |
165-5970 Switch Gp-Toggle -Fuel Priming Pump
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
275-7764 Switch Gp-Wiper -Front
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 27***41 | Switch Group-Wiper; -Intermittent-Front, Rear | 1 |
| 27***64 | Switch Group-Wiper; -Intermittent | 1 |
3e-0155 Switch Gp-Wiper -Front
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***86 | Wiper Switch Assembly; (24-Volt)(Front/Intermittent) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
275-7741 Switch Gp-Wiper -Front
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 27***41 | Switch Group-Wiper; -Intermittent-Front, Rear | 1 |
122-5053 Valve Gp-Solenoid
| 12***53 | Valve Group-Solenoid | 1 |
| 9X***84 | Seal Kit; (Includes Seal, Ring, Spacer And Nut) | 1 |
180-8522 Wiring Gp-Cab
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
228-5786 Wiring Gp-Engine
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
262-0839 Wiring Gp-Engine
| 06***51 | Clamp | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
176-9770 Wiring Gp-Engine
| 06***78 | Cable Assem. | 1 |
| 06***51 | Clamp | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
230-2531 Wiring Gp-Heater -Air Inlet Heater
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 13***43 | Boot; (Red)(Red) | 1 |
| 22***77 | Switch Group-Magnetic; -Air Inlet Heater Relay | 1 |
207-4109 Wiring Gp-Platform
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
Engine Arrangement
171-7613 Engine Ar-Complete
| 11***75 | Starting Motor Group-Electric; (Cold Weather) | 1 |
| 11***74 | Filter Group-Engine Oil | 1 |
| 11***84 | Starting Aid Group; -Air Inlet Heater | 1 |
215-3526 Engine Ar-Core
| 11***87 | Crankshaft Group | 1 |
| 11***03 | Seal Group-Crankshaft | 1 |
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
171-7616 Installation Ar-Engine
| 17***16 | Installation Ar-Engine | 1 |
| 17***66 | Cooler Group-Transmission Oil | 1 |
| 17***67 | Fan Group-Blower | 1 |
226-3311 Installation Ar-Engine -Waste Handling
| 13***79 | Precleaner Group; -Turbine | 1 |
| 15***76 | Kit-Screen; (Turbine Precleaner) | 1 |
| 15***81 | Precleaner As; (S) | 1 |
Frame And Body
136-7801 Bar Gp-Striker -Rear
| 13***01 | Bar Group-Striker; -Rear | 1 |
| 1D***49 | Bolt (1.25 X 7 X 10in) | 4 |
| 5Q***40 | Bar As-Striker; (Rh) | 1 |
180-2330 Bumper Gp
| 15***83 | Bracket As | 1 |
| 15***84 | Bracket As | 1 |
| 18***30 | Bumper Group | 1 |
217-2490 Counterweight Gp
| 21***90 | Counterweight Group | 1 |
| 22***07 | Plate As; (Rh) | 1 |
| 22***08 | Block-Rh | 1 |
217-2489 Counterweight Gp
| 21***89 | Counterweight Group | 1 |
| 22***07 | Plate As; (Rh) | 1 |
| 22***08 | Block-Rh | 1 |
234-3200 Door Gp-Access -Rear, Rh
| 13***54 | Spacer; (10.5x19x26.5-mm Thk) | 1 |
| 13***44 | Rod | 1 |
| 17***70 | Latch As; (See Npr For Required Pawl) | 1 |
234-3199 Door Gp-Access -Rear Lh
| 13***54 | Spacer; (10.5x19x26.5-mm Thk) | 1 |
| 13***44 | Rod | 1 |
| 17***70 | Latch As; (See Npr For Required Pawl) | 1 |
237-4142 Door Gp-Access -Front, Rh
| 23***31 | Hose, Hinge | 1 |
| 23***42 | Door Group-Access; -Front, Rh | 1 |
| 24***22 | Plate | 1 |
237-4146 Door Gp-Access -Front, Lh
| 23***31 | Hose, Hinge | 1 |
| 23***46 | Door Group-Access; -Front, Lh | 1 |
| 24***22 | Plate | 1 |
232-0468 Door Gp-Access -Front, Lh
| 13***54 | Spacer; (10.5x19x26.5-mm Thk) | 1 |
| 13***44 | Rod | 1 |
| 19***17 | Liner; (Lh) | 1 |
232-0467 Door Gp-Access -Front, Rh
| 13***54 | Spacer; (10.5x19x26.5-mm Thk) | 1 |
| 13***44 | Rod | 1 |
| 19***19 | Liner; (Rh) | 1 |
230-8741 Door Gp-Access -Cab Filter
| 14***98 | Lift & Latch As | 1 |
| 23***40 | Door As | 1 |
| 23***41 | Door Group-Access; -Cab Filter | 1 |
176-9766 Enclosure Gp-Engine
| 11***75 | Plate | 2 |
| 12***78 | Locknut; (M6x1-Thd) | 8 |
| 13***54 | Spacer; (10.5x19x26.5-mm Thk) | 2 |
226-3315 Enclosure Gp-Engine -Waste Handling
| 22***15 | Enclosure Group-Engine; -Waste Handling | 1 |
| 22***16 | Guard Group-Engine; -Waste Handling | 1 |
176-9767 Frame Gp-Loader
| 17***67 | Frame Group-Loader | 1 |
| 18***94 | Frame As | 1 |
| 3W***96 | Shackle As | 1 |
226-3327 Frame Gp-Loader -Waste Handling
| 22***27 | Frame Group-Loader; -Waste Handling | 1 |
| 22***28 | Frame As | 1 |
| 3W***96 | Shackle As | 1 |
239-0864 Grill Gp-Radiator -Heavy Duty
| 05***48 | Locknut; (9/16-18-Thd) | 2 |
| 17***22 | Latch As; (Yellow) | 1 |
| 19***68 | Pawl-T-Bar Latch | 1 |
151-2516 Guard Gp-Bottom
| 15***16 | Guard Group-Bottom | 1 |
| 15***18 | Guard As | 1 |
| 15***19 | Guard As | 1 |
185-9419 Guard Gp-Bottom -Waste Handling-Heavy Duty
| 18***19 | Guard Group-Bottom; -Waste Handling-Heavy Duty | 1 |
| 21***05 | Guard As | 1 |
| 21***06 | Guard As | 1 |
226-3316 Guard Gp-Engine -Waste Handling
| 22***16 | Guard Group-Engine; -Waste Handling | 1 |
| 22***17 | Guard As | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 4 |
186-0002 Guard Gp-Engine
| 18***02 | Guard Group-Engine | 1 |
| 7P***94 | Bracket | 1 |
| 7P***95 | Plate Assem. | 1 |
186-0001 Guard Gp-Engine
| 18***01 | Guard Group-Engine | 1 |
| 18***02 | Guard Group-Engine | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 4 |
150-0793 Guard Gp-Front
| 14***03 | Cover | 1 |
| 15***93 | Guard Group-Front | 1 |
| 15***94 | Bracket As | 1 |
264-7107 Guard Gp-Idler
| 26***05 | Guard As-Idler | 2 |
| 26***98 | Guard As-Idler; (Inner, Rh; Outer, Lh) | 2 |
| 26***99 | Guard As-Idler; (Inner, Lh; Outer, Rh) | 2 |
8y-2416 Guard Gp-Idler -Waste Handling
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 24 |
| 8T***39 | Capscrew; (Hex Hd) (M12 X 1.75 X 30l Gr 10.9) | 4 |
| 8T***92 | Capscrew; (Hex Hd) (M12 X 1.75 X 25, Gr10.9, Z) | 16 |
254-5269 Guard Gp-Idler -Systemone
| 25***69 | Guard Group-Idler; -Systemone | 1 |
| 25***34 | Guard As | 2 |
| 26***05 | Guard As-Idler | 2 |
265-9976 Guard Gp-Idler -Systemone
| 25***69 | Guard Group-Idler; -Systemone | 1 |
| 26***76 | Guard Group-Idler; -Systemone | 1 |
226-0574 Guard Gp-Lighting
| 15***20 | Washer; (17x56x5-mm Thk) | 2 |
| 20***07 | Bracket; (Lh) | 1 |
| 20***08 | Bracket; (Rh) | 1 |
195-1069 Guard Gp-Lighting
| 12***51 | Guard; (Front, Lh)(Lh) | 1 |
| 12***54 | Guard; (Front, Rh)(Rh) | 1 |
| 13***69 | Guard As-Front-Rh | 1 |
8g-5589 Guard Gp-Lines
| 22***16 | Guard As | 1 |
| 8G***89 | Guard Group-Lines; Tilt Lines Guard Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
226-3313 Guard Gp-Radiator -Waste Handling
| 22***13 | Guard Group-Radiator; -Waste Handling | 1 |
| 23***64 | Grill Group-Radiator; -Heavy Duty | 1 |
| 23***50 | Guard As | 1 |
176-6254 Guard Gp-Radiator
| 08***91 | Bolt; (M10x1.5x55-mm) | 1 |
| 11***21 | Seal; (139cm) | 0 |
| 17***12 | Strip | 1 |
151-3457 Hitch Gp
| 15***57 | Hitch Group | 1 |
| 1M***80 | Pin-Drawbar | 1 |
| 3B***19 | Pin-Cotter | 1 |
161-9686 Plug Gp-Bumper
| 16***86 | Plug Group-Bumper | 1 |
| 6V***13 | Plug | 10 |
226-3324 Seal Gp-Front -Waste Handling
| 22***24 | Seal Group-Front; -Waste Handling | 1 |
| 22***25 | Baffle As | 1 |
226-3319 Seal Gp-Hood -Waste Handling
| 15***81 | Seal; (2.5m) | 0 |
| 22***19 | Seal Group-Hood; -Waste Handling | 1 |
| 22***20 | Screen | 1 |
110-1393 Support Gp-Platform
| 11***93 | Support Group-Platform | 1 |
| 16***30 | Post As-Rh | 1 |
| 16***31 | Post As-Lh | 1 |
Fuel System
241-2426 Filter Gp-Water Sep & Fuel
| 03***80 | Spacer; (9x16x36-mm) | 1 |
| 14***72 | Elbow Group | 1 |
| 20***69 | Filter Group-Water Sep & Fuel | 1 |
174-9570 Filter Gp-Water Sep & Fuel
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
208-8369 Filter Gp-Water Sep & Fuel
| 16***54 | Pump Group-Fuel Priming; -Manual | 1 |
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 20***71 | Base As | 1 |
208-6942 Filter Gp-Water Sep & Fuel
| 00***73 | Elbow, Each Including: | 1 |
| 20***42 | Filter Group-Water Sep & Fuel | 1 |
| 20***69 | Filter Group-Water Sep & Fuel | 1 |
176-9765 Lines Gp-Fuel
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 14***65 | Elbow | 1 |
215-3386 Lines Gp-Fuel Filter
| 14***75 | Valve-Drain; (Fuel) | 1 |
| 14***18 | Connector As | 1 |
| 17***99 | Base As-Fuel Filter | 1 |
215-9260 Lines Gp-Fuel Filter
| 08***56 | 90 Degrees Elbow | 2 |
| 11***64 | Clip-Loop | 1 |
| 14***75 | Valve-Drain; (Fuel) | 1 |
205-4161 Pump & Mtg Gp-Unit Inj Hyd
| 18***41 | Pump Group-Unit Injector Hydraulic | 1 |
| 18***99 | Connector As | 1 |
| 20***61 | Pump & Mtg Group-Unit Inj Hydraulic | 1 |
165-9154 Pump Gp-Fuel Priming -Manual
| 06***39 | Seal-O-Ring | 1 |
| 16***54 | Pump Group-Fuel Priming; -Manual | 1 |
| 18***23 | Pump As-Fuel Priming | 1 |
184-5248 Pump Gp-Fuel Priming -Electric
| 17***97 | Pump Group-Fuel Prm & Water Sep | 1 |
| 18***48 | Pump Group-Fuel Priming; -Electric | 1 |
| 24***27 | Separator Group-Water | 1 |
212-3657 Pump Gp-Fuel Prm & Water Sep -Electric
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 21***57 | Pump Group-Fuel Prm & Water Sep; -Electric-Primary Filter | 1 |
| 21***39 | Filter Base Assembly; (24-Volt) | 1 |
176-9997 Pump Gp-Fuel Prm & Water Sep
| 00***73 | Elbow, Each Including: | 1 |
| 13***06 | Film-Identification; (Fuel) | 1 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
178-6343 Pump Gp-Unit Injection
| 15***88 | Deflector | 1 |
| 17***42 | Pump Group-Unit Injection; -Fuel | 1 |
| 17***43 | Pump Group-Unit Injection; -Fuel | 1 |
178-6342 Pump Gp-Unit Injection
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 13***15 | Ring-Backup; (40mm Od) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 1 |
180-7341 Pump Gp-Unit Injector Hyd
| 11***75 | Washer; (13.5x32x8-mm Thk) | 1 |
| 12***53 | Valve Group-Solenoid | 1 |
| 12***73 | Gear-Pump Drive; (36 Teeth) | 1 |
205-1306 Regulator Gp-Fuel Pressure
| 19***38 | Elbow Assem. | 0 |
| 20***06 | Name-Plate (Portuguese), Regulator Group-Fuel Pressure | 1 |
| 23***43 | Regulator Group-Fuel Pressure | 1 |
232-0343 Regulator Gp-Fuel Pressure
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
241-2427 Separator Gp-Water
| 03***80 | Spacer; (9x16x36-mm) | 1 |
| 14***72 | Elbow Group | 1 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
151-3435 Tank Gp-Fuel
| 15***35 | Tank Group-Fuel | 1 |
| 15***14 | Flange | 1 |
| 15***44 | Sensor Group-Liquid Level; (Fuel) | 1 |
Hydraulic System
180-9419 Accumulator Gp-Hydraulic -Uncharged
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
| 16***79 | Cap; (Accumulator) | 1 |
| 16***80 | Core | 1 |
160-2669 Accumulator Gp-Hydraulic -Charged
| 16***69 | Accumulator Group-Hydraulic; -Charged | 1 |
226-8541 Control Gp-Diverter -Auxiliary Front, Rear Lines
| 13***06 | Cable As | 1 |
| 14***27 | Lever As | 1 |
| 1A***57 | Pin--Yoke End | 1 |
190-1463 Conversion Gp-Control Valve -1-Lever To 2-Lever Conversion
| 18***20 | Valve Group-Pilot; -Bucket Control | 1 |
| 19***63 | Conversion Group-Control Valve; -1-Lever To 2-Lever Conversion | 1 |
| 25***95 | Film-Instruction; (Sgl Lever Implement Control) | 1 |
3g-5128 Cylinder & Mtg Gp-Ripper
| 2K***73 | Locknut Inside Guard Assembly | 2 |
| 3G***72 | Bearing | 2 |
| 3G***66 | Spacer 18mm (.709 In.) Thick | 2 |
9v-8168 Cylinder & Seal Gp-Bucket
| 4T***87 | Cylinder Group; -Multipurpose | 1 |
| 7K***02 | Seal (In The Rod Hole) | 2 |
| 7K***04 | Seal (In The Cylinder Mounting Hole) | 2 |
4t-9387 Cylinder Gp-Bucket -Multipurpose
| 16***95 | Seal As-Buffer | 1 |
| 16***04 | Seal-U-Cup | 1 |
| 1H***28 | Seal (3.73 In. Inside Diameter) | 1 |
3g-1296 Cylinder Gp-Ripper
| 1H***28 | Seal (3.73 In. Inside Diameter) | 1 |
| 2K***30 | Ring-Back-Up | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
9t-3625 Cylinder Gp-Lift
| 12***79 | Head | 1 |
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
224-5730 Cylinder Gp-Tilt
| 16***08 | Seal As-Buffer | 1 |
| 16***19 | Seal-U-Cup | 1 |
| 1D***38 | B. 1" N.C. X 3 1/2" | 2 |
176-9883 Hydraulic Ar
| 14***58 | Lines Group-Auxiliary Hydraulic | 1 |
| 17***83 | Hydraulic Ar | 1 |
| 18***19 | Valve Group-Pilot; -Bucket, Auxiliary Control-Auxiliary-Rear Lines | 1 |
171-7617 Hydraulic Ar
| 13***70 | Lines Group-Lift Cylinder | 1 |
| 14***57 | Kickout & Positioner Group | 1 |
| 15***42 | Mounting Group-Hydraulic Tank | 1 |
176-9881 Hydraulic Ar
| 14***58 | Lines Group-Auxiliary Hydraulic | 1 |
| 17***81 | Hydraulic Ar | 1 |
| 18***15 | Lines Group-Rear Attachment | 1 |
176-9882 Hydraulic Ar
| 14***58 | Lines Group-Auxiliary Hydraulic | 1 |
| 17***82 | Hydraulic Ar | 1 |
| 18***15 | Lines Group-Rear Attachment | 1 |
176-9886 Hydraulic Ar
| 14***58 | Lines Group-Auxiliary Hydraulic | 1 |
| 17***86 | Hydraulic Ar | 1 |
| 18***15 | Lines Group-Rear Attachment | 1 |
176-9885 Hydraulic Ar
| 14***58 | Lines Group-Auxiliary Hydraulic | 1 |
| 17***85 | Hydraulic Ar | 1 |
| 18***15 | Lines Group-Rear Attachment | 1 |
176-9884 Hydraulic Ar
| 14***58 | Lines Group-Auxiliary Hydraulic | 1 |
| 17***84 | Hydraulic Ar | 1 |
| 18***17 | Valve Group-Pilot; -Bucket, Auxiliary Control | 1 |
143-3457 Kickout & Positioner Gp
| 14***57 | Kickout & Positioner Group | 1 |
| 14***65 | Bracket | 1 |
| 14***36 | Tube As | 1 |
141-9358 Lines Gp-Auxiliary Hydraulic
| 14***58 | Lines Group-Auxiliary Hydraulic | 1 |
| 14***54 | Hose As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
5g-8059 Lines Gp-Bucket
| 1V***89 | Tube Assem. | 1 |
| 1V***90 | Tube Assem. | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 4 |
284-0868 Lines Gp-Bucket Cylinder
| 28***68 | Lines Group-Bucket Cylinder | 1 |
| 28***73 | Hose As | 2 |
| 28***74 | Hose As | 4 |
210-5872 Lines Gp-Front
| 14***39 | Connector As. | 1 |
| 14***60 | Elbow Group | 1 |
| 21***72 | Lines Group-Front | 1 |
226-7379 Lines Gp-Hydraulic
| 14***52 | Elbow As. | 1 |
| 14***57 | Elbow As. | 1 |
| 16***94 | Connector As | 1 |
132-4670 Lines Gp-Lift Cylinder
| 12***72 | Stud-Mounting; (3/8-16x1.564-In)(3/8-16 Thd) | 2 |
| 13***04 | Tube As | 1 |
| 13***05 | Tube As | 1 |
209-4345 Lines Gp-Pilot
| 09***14 | Valve-Check | 1 |
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 11***84 | Spacer; (10.7x17.1x30-mm Thk) | 1 |
225-7627 Lines Gp-Pump
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***57 | Elbow As. | 1 |
| 15***48 | Adapter-Orfs | 1 |
188-6115 Lines Gp-Rear Attachment
| 10***21 | Connector | 2 |
| 14***58 | Plate | 2 |
| 15***38 | Tee As | 2 |
151-2564 Lines Gp-Ripper
| 14***45 | Connector As | 2 |
| 14***90 | Elbow Group | 2 |
| 15***64 | Lines Group-Ripper | 1 |
221-6727 Lines Gp-Tilt Cylinder
| 13***34 | Tube As | 1 |
| 13***35 | Tube As | 1 |
| 17***25 | Elbow As | 1 |
8v-7370 Mounting Gp-Cylinder
| 1K***72 | Locknut Horn To Guard | 2 |
| 5B***51 | Fitting-Straight | 2 |
| 7K***27 | Fitting-Hydraulic | 2 |
151-1042 Mounting Gp-Hydraulic Tank
| 00***60 | Pad-Engine Mount | 3 |
| 11***10 | Valve; (Breaker Relief Valve) | 1 |
| 15***42 | Mounting Group-Hydraulic Tank | 1 |
240-9923 Mounting Gp-Hydraulic Tank
| 00***60 | Pad-Engine Mount | 3 |
| 11***10 | Valve; (Breaker Relief Valve) | 1 |
| 1H***79 | Adapter,Straight,Pi Hose To Valve Assembly | 1 |
208-6560 Pump & Mounting Gp -Implement
| 20***60 | Pump & Mounting Group; -Implement | 1 |
| 22***38 | Pump Group-Vane; -Implement | 1 |
| 3F***92 | Seal-O-Ring | 1 |
224-9838 Pump Gp-Vane -Implement
| 06***55 | Screw-Slotted | 2 |
| 17***16 | Kit-Shaft; (Vane Pump) | 1 |
| 17***17 | Kit-Seal; (Vane Pump) | 1 |
227-3045 Tank & Filter Gp-Hydraulic
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 9 |
| 03***38 | Bolt 69.85 mm(2.75 In.) Long | 8 |
| 03***81 | Bolt-Socket Head; (5/16-18x0.625-In) | 7 |
223-5802 Tank Gp-Hydraulic
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 9 |
| 03***81 | Bolt-Socket Head; (5/16-18x0.625-In) | 7 |
| 05***37 | Plug | 2 |
236-4193 Valve Gp-Control -Bucket Lift, Tilt
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 1 |
| 12***94 | Valve Group-Relief; -Tilt Cylinder Rod End | 1 |
227-2888 Valve Gp-Control -Implement
| 14***51 | Retainer | 1 |
| 14***14 | Shim; (0.5-mm Thk)(.5mm Thk) | 8 |
| 14***69 | Plug | 1 |
9j-7128 Valve Gp-Diverter -Auxiliary Front, Rear Lines
| 02***97 | Setscrew; (3/8-16x1.75-In) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 1 |
248-3080 Valve Gp-Diverter -Auxiliary Front, Rear Lines
| 02***97 | Setscrew; (3/8-16x1.75-In) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 1 |
189-1519 Valve Gp-Pilot -Bucket, Auxiliary Control-Auxiliary-Rear Lines
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***40 | Valve Group-Pilot; -Auxiliary | 1 |
| 15***71 | Kit-Plate; (Pilot Valve) | 1 |
148-7640 Valve Gp-Pilot -Auxiliary
| 09***59 | Setscrew-Socket; (M4x0.7-Thd)(M4x0.7 Thd) | 2 |
| 11***34 | Seal-O-Ring | 2 |
| 13***32 | Kit-Spring; (Pilot Valve) | 1 |
189-2120 Valve Gp-Pilot -Bucket Control
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***34 | Seal-O-Ring | 2 |
189-1517 Valve Gp-Pilot -Bucket, Auxiliary Control
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***65 | Plug | 2 |
| 14***47 | Valve Group-Pilot; -Auxiliary | 1 |
159-1572 Valve Gp-Pilot -Bucket Lift, Tilt
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***08 | Coil As | 3 |
| 15***08 | Kit-Pilot Valve; (Flange)(Pilot Valve Lift & Dump) | 1 |
243-3320 Valve Gp-Pilot -Bucket Lift, Tilt
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***08 | Coil As | 3 |
| 15***08 | Kit-Pilot Valve; (Flange)(Pilot Valve Lift & Dump) | 1 |
157-2883 Valve Gp-Pilot -Bucket Lift, Lower
| 11***34 | Seal-O-Ring | 1 |
| 13***61 | Setscrew-Hex Socket; (M5x0.8x16-mm) | 2 |
| 14***43 | Coil As | 2 |
152-4819 Valve Gp-Pilot -Bucket Tilt, Dump
| 13***61 | Setscrew-Hex Socket; (M5x0.8x16-mm) | 2 |
| 14***43 | Coil As | 1 |
| 14***52 | Ball; (Control Lever) | 1 |
142-7547 Valve Gp-Pilot -Auxiliary
| 09***59 | Setscrew-Socket; (M4x0.7-Thd)(M4x0.7 Thd) | 2 |
| 14***47 | Valve Group-Pilot; -Auxiliary | 1 |
| 14***52 | Ball; (Control Lever) | 1 |
189-1518 Valve Gp-Pilot -Bucket Lift, Tilt
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***08 | Coil As | 3 |
9j-0458 Valve Gp-Relief -Implement
| 02***97 | Setscrew; (3/8-16x1.75-In) | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
126-3694 Valve Gp-Relief -Bucket Tilt
| 10***52 | Valve Group-Relief | 1 |
| 12***94 | Valve Group-Relief; -Tilt Cylinder Rod End | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
218-4906 Valve Gp-Relief -Main
| 03***34 | Seal-O-Ring | 1 |
| 06***39 | Seal-O-Ring | 1 |
| 21***06 | Valve Group-Relief; -Main | 1 |
195-3739 Valve Gp-Solenoid
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 17***92 | Kit-Seal; (Solenoid Valve) | 1 |
| 19***39 | Valve Group-Solenoid; -Pressure Reducing | 1 |
152-8385 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 15***83 | Cartridge As | 1 |
Implements
206-9538 Control Gp-Bucket
| 13***66 | Step As | 2 |
| 20***38 | Control Group-Bucket | 1 |
| 20***30 | Arm & Bearing As-Lift | 1 |
Lubrication System
179-7001 Adapter Gp-Oil Line
| 17***01 | Adapter Group-Oil Line; -Unit Injector Pump | 1 |
| 17***02 | Adapter Assem. | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
120-8971 Breather Gp -Engine
| 12***71 | Breather Group; -Engine | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 5N***85 | Washer-Sealing; (Sealing) | 1 |
215-3601 Filler Gp-Engine Oil
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 06***26 | Cap-Tube | 1 |
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
117-4074 Filter Gp-Engine Oil
| 11***74 | Filter Group-Engine Oil | 1 |
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 23***54 | Gasket | 1 |
241-1758 Fumes Disposal Gp
| 20***36 | Hose-Fumes Disposal | 1 |
| 24***58 | Fumes Disposal Group | 1 |
| 3E***52 | Washer-Hard; (8.8x20.5x2.5-mm Thk) | 1 |
209-6892 Fumes Disposal Gp
| 20***36 | Hose-Fumes Disposal | 1 |
| 20***92 | Fumes Disposal Group | 1 |
| 2B***41 | Spacer Guard Assembly To Bracket Assembly | 1 |
208-6937 Gauge Gp-Oil Level (Dipstick) -Engine
| 19***31 | Clip | 1 |
| 1F***67 | Clip 7t***28 Cable As To Fan Shroud | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
4w-2914 Lines Gp-Engine Oil
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
| 4W***14 | Lines Group-Engine Oil | 1 |
177-0003 Lines Gp-Turbocharger Oil
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***87 | Seal-O-Ring (23.16 mm Id) | 1 |
| 11***42 | Adapter | 1 |
212-2270 Pump Gp-Engine Oil
| 20***97 | Pump Group-Engine Oil | 1 |
| 21***70 | Pump Group-Engine Oil | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
200-4497 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
Machine Arrangement
229-8481 Chassis Ar -Waste Handling-Guarding
| 22***13 | Guard Group-Radiator; -Waste Handling | 1 |
| 22***15 | Enclosure Group-Engine; -Waste Handling | 1 |
| 22***19 | Seal Group-Hood; -Waste Handling | 1 |
226-3309 Chassis Ar -Waste Handling
| 18***19 | Guard Group-Bottom; -Waste Handling-Heavy Duty | 1 |
| 19***69 | Guard Group-Lighting | 1 |
| 22***09 | Chassis Ar; -Waste Handling | 1 |
171-7614 Chassis Ar
| 11***93 | Support Group-Platform | 1 |
| 11***88 | Mounting Group-Rops | 1 |
| 15***93 | Guard Group-Front | 1 |
283-4645 Conversion Ar-Machine -Systemone
| 22***81 | Chassis Ar; -Waste Handling-Guarding | 1 |
| 22***82 | Precleaner Ar | 1 |
| 23***61 | Final Drive & Brake Group | 1 |
171-7612 General Ar
| 17***12 | General Ar | 1 |
| 17***13 | Engine Ar-Complete | 1 |
| 17***14 | Chassis Ar | 1 |
229-8480 Waste Handling Ar -Guarding
| 22***12 | Undercarriage Ar; -Waste Handling | 1 |
| 22***80 | Waste Handling Ar; -Guarding | 1 |
| 22***81 | Chassis Ar; -Waste Handling-Guarding | 1 |
226-3308 Waste Handling Ar
| 22***08 | Waste Handling Ar | 1 |
| 22***09 | Chassis Ar; -Waste Handling | 1 |
| 22***10 | Power Train Ar; -Waste Handling | 1 |
283-4650 Waste Handling Ar -Systemone
| 22***09 | Chassis Ar; -Waste Handling | 1 |
| 22***10 | Power Train Ar; -Waste Handling | 1 |
| 22***11 | Installation Ar-Engine; -Waste Handling | 1 |
Operator Station
225-2724 Air Conditioner Gp -Cab
| 08***91 | Bolt; (M10x1.5x55-mm) | 5 |
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
| 10***99 | Valve As; (Air Conditioner Refrigerant) | 1 |
267-8794 Air Conditioner Gp
| 10***25 | Clip | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Suppressor As-Arc | 1 |
228-0652 Air Conditioner Gp -Cab
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
| 10***99 | Valve As; (Air Conditioner Refrigerant) | 1 |
| 11***02 | Boot | 2 |
222-3473 Armrest Gp
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 14***98 | Lift & Latch As | 2 |
| 15***58 | Armrest As | 2 |
176-9763 Cab Ar-Enclosed Rops
| 16***68 | Plate-Identification; (Sequence)(Open Rops) | 1 |
| 16***12 | Heater Group-Cab | 1 |
| 17***63 | Cab Ar-Enclosed Rops | 1 |
230-8755 Cab Ar-Enclosed Rops -Debris Resistant Air Conditioner
| 22***25 | Cab Ar-Enclosed Rops | 1 |
| 23***55 | Cab Ar-Enclosed Rops; -Debris Resistant Air Conditioner | 1 |
225-2725 Cab Ar-Enclosed Rops
| 17***63 | Cab Ar-Enclosed Rops | 1 |
| 22***24 | Air Conditioner Group; -Cab-Debris Resistant | 1 |
| 22***25 | Cab Ar-Enclosed Rops | 1 |
176-9901 Cab Ar-Open Rops
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***25 | Screw-Flat Head; (M6x1x25-mm) | 6 |
| 12***55 | Plate | 2 |
189-2229 Compressor Gp-Refrigerant
| 10***59 | Spacer; (13.5-mm Thk) | 1 |
| 12***95 | Pulley As-Idler | 1 |
| 18***06 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
183-5106 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 18***06 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
245-4667 Condenser & Mtg Gp-Refrigerant
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 17***89 | Guard-Fan | 2 |
5q-9389 Condenser Gp-Refrigerant -Debris Resistant Air Conditioner
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***89 | Guard-Fan | 2 |
175-2540 Condenser Gp-Refrigerant
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***72 | Seal; (135-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
304-7249 Condenser Gp-Refrigerant
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***72 | Seal; (135-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
205-3410 Condenser Gp-Refrigerant
| 10***25 | Clip | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
245-4413 Condenser Gp-Refrigerant
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***72 | Seal; (135-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
183-4566 Console Gp -Lh
| 18***66 | Console Group; -Lh | 1 |
| 18***82 | Panel Group-Circuit Breaker | 1 |
| 18***86 | Control Group-Direction & Speed; -Hydrostatic Drive | 1 |
183-6586 Control Gp-Direction & Speed -Hydrostatic Drive
| 00***70 | Washer (Spring); (Conical) | 6 |
| 09***15 | Ring-Retaining | 1 |
| 09***31 | Nut; (M12x1.75-Thd) | 2 |
189-2927 Control Gp-Hydraulic -Bucket Control
| 11***27 | Screw-Machine; (M6x1x30-mm) | 4 |
| 13***67 | Grommet | 1 |
| 14***70 | Guard | 6 |
123-6493 Control Gp-Pedal -Speed Overide, Brake
| 11***49 | Screw-Pan Head; (M5x0.8x30-mm) | 2 |
| 12***70 | Spring; (Lh) | 1 |
| 12***71 | Spring; (Rh) | 1 |
183-6505 Control Gp-Pedal -Steering, Brake
| 12***60 | Control Group-Steering | 1 |
| 12***93 | Control Group-Pedal; -Speed Overide, Brake | 1 |
| 18***05 | Control Group-Pedal; -Steering, Brake | 1 |
123-6160 Control Gp-Steering
| 11***49 | Screw-Pan Head; (M5x0.8x30-mm) | 4 |
| 12***60 | Control Group-Steering | 1 |
| 12***90 | Spacer; (10.2x16x16-mm Thk) | 4 |
154-7443 Control Gp-Unprgmed Monitor -Caterpillar Monitoring System
| 15***43 | Control Group-Unprgmed Monitor; -Caterpillar Monitoring System | 1 |
| 25***01 | Electronic Control Group; (Caterpillar Monitoring System)(Electronic) | 1 |
184-7262 Cover Gp-Cab
| 18***62 | Cover Group-Cab | 1 |
| 19***13 | Cover As; (Rear) | 1 |
| 19***14 | Cover As; (Rear) | 1 |
169-1369 Cover Gp-Cab Filter
| 11***76 | Filter Element-Air; (Cab Recirculation) | 1 |
| 12***24 | Cover | 1 |
| 12***58 | Knob; (Cover Removal) | 4 |
206-8530 Dash Gp -Open Rops
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 16 |
183-4562 Dash Gp -Enclosed Rops
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 16 |
| 15***86 | Screw; (M4x0.7x16-mm) | 2 |
| 16***73 | Louver As | 2 |
126-1626 Door Gp-Cab -Enclosed Rops
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***70 | Handle Assem. | 2 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 8 |
187-4217 Duct Gp-Cab Air
| 14***67 | Clamp; (Hose) | 4 |
| 18***17 | Duct Group-Cab Air | 1 |
| 18***18 | Duct-Lh | 1 |
183-4573 Floor Mat Gp
| 11***25 | Screw-Flat Head; (M6x1x25-mm) | 6 |
| 12***55 | Plate | 2 |
| 12***72 | Floor Mat; (Rh) | 1 |
189-2049 Handhold Gp
| 13***19 | Handle; (Lower) | 4 |
| 13***21 | Handle; (Upper) | 2 |
| 18***49 | Handhold Group | 1 |
188-8041 Hatch Gp
| 12***62 | Plate | 1 |
| 16***36 | Seal | 1 |
| 16***37 | Cover | 1 |
169-3512 Heater Gp-Cab
| 01***60 | Grommet | 1 |
| 11***09 | Knob-Control | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
176-9764 Installation Gp-Cab
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
186-3109 Installation Gp-Radio
| 12***56 | Grill | 2 |
| 14***28 | Antenna As | 1 |
| 18***09 | Installation Group-Radio | 1 |
190-8131 Latch Gp -Door Release
| 12***57 | Button As | 2 |
| 12***58 | Lever | 2 |
| 12***59 | Cable As | 2 |
183-4574 Liner Gp-Cab
| 10***32 | Lamp Group-Dome | 1 |
| 15***29 | Tray Assem. -Ash | 1 |
| 15***01 | Fastener-Hook & Loop | 2 |
184-7263 Mirror Gp-Rear View
| 14***97 | Cap | 2 |
| 18***63 | Mirror Group-Rear View | 1 |
| 18***51 | Spacer; (9x20x5-mm Thk) | 4 |
166-6928 Module Gp-Quad Gauge
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 16***28 | Module Group-Quad Gauge; -Engine Coolant Temp, Transmission Oil Temp, Hydraulic Oil Temp, Fuel Level | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
330-5047 Motor Gp-Window Wiper -Rear
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 33***47 | Motor Group-Window Wiper; -Rear | 1 |
251-3263 Motor Gp-Window Wiper -Rear
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 20***59 | Plate | 1 |
146-6149 Motor Gp-Window Wiper -Front
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
| 14***49 | Motor Group-Window Wiper; -Front | 1 |
226-8610 Mounting Gp-Antenna
| 22***96 | Antenna; (Flexible)(Flex) | 1 |
| 22***98 | Antenna As | 1 |
| 22***10 | Mounting Group-Antenna | 1 |
112-7788 Mounting Gp-Rops
| 11***88 | Mounting Group-Rops | 1 |
| 11***28 | Plate | 2 |
| 11***31 | Mount Assem. | 8 |
188-9610 Panel Gp-Instrument -Enclosed Rops
| 10***25 | Clip | 2 |
| 11***85 | Knob-Wiper Switch; (Rear) | 1 |
| 11***03 | Resistor As | 1 |
206-8529 Panel Gp-Instrument -Open Rops
| 10***25 | Clip | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***03 | Resistor As | 1 |
227-7254 Pressurizer Gp-Cab -Open Rops
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 16 |
187-7354 Pressurizer Gp-Cab -Enclosed Rops
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 16 |
200-5729 Radio Gp -Am/Fm/Wb
| 19***54 | Sleeve | 1 |
| 20***29 | Radio Group; -Am/Fm/Wb | 1 |
294-2006 Radio Gp -Am/Fm/Wb/Cd Player
| 13***65 | Bumper | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
262-9163 Radio Gp -Am/Fm/Wb/Cd Player
| 13***66 | Lead-Antenna | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***17 | Support-Radio | 1 |
331-5291 Radio Gp -Am/Fm/Wb/Cd Player
| 19***54 | Sleeve | 1 |
| 33***91 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
331-5292 Radio Gp -Am/Fm/Wb
| 19***54 | Sleeve | 1 |
| 33***92 | Radio Group; -Am/Fm/Wb | 1 |
250-3799 Radio Gp -Am/Fm/Wb, Cassette
| 13***65 | Bumper | 1 |
| 14***81 | Knob-Select; (Radio) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
146-3090 Radio Gp -Am/Fm Cassette
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 2 |
| 13***63 | Harness As-Radio; (Radio) | 1 |
| 13***65 | Bumper | 1 |
284-8953 Radio Gp -Am/Fm/Wb Cd Player
| 14***81 | Knob-Select; (Radio) | 1 |
| 19***54 | Sleeve | 1 |
| 28***53 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
173-6532 Radio Gp -Am/Fm Cassette
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***65 | Bumper | 1 |
| 17***32 | Radio Group; (Am/Fm-Cassette) | 1 |
241-4936 Radio Gp -Am/Fm/Wb Cd Player
| 14***81 | Knob-Select; (Radio) | 1 |
| 19***54 | Sleeve | 1 |
| 24***36 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
250-3794 Radio Gp -Am/Fm/Wb
| 13***65 | Bumper | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
225-6275 Roof Gp
| 17***83 | Washer-Rubber; (30x60x3mm Thk) | 1 |
| 17***85 | Washer; (8.8x35x3-mm Thk) | 2 |
| 17***86 | Washer; (17x60x3-mm Thk) | 6 |
175-7307 Rops Ar-Open
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 17***07 | Rops Ar-Open | 1 |
| 17***01 | Cab Ar-Open Rops | 1 |
183-4594 Rops Gp-Enclosed
| 12***26 | Door Group-Cab; -Enclosed Rops | 1 |
| 12***06 | Bumper As | 4 |
| 14***45 | Baffle | 2 |
268-0800 Screen Gp-Cab -Windshield
| 17***22 | Latch As; (Yellow) | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 26***95 | Support As; (Lh) | 1 |
223-7960 Screen Gp-Cab -Windshield
| 19***66 | Washer-Hard; (11x25x10-mm Thk) | 1 |
| 22***58 | Support As; (Lh) | 1 |
| 22***59 | Support As; (Rh) | 1 |
227-9232 Seat Gp -Vinyl, Air
| 20***48 | Absorber As-Shock; (Sideshift) | 1 |
| 22***32 | Seat Group; -Vinyl, Air | 1 |
| 24***68 | Cover As | 1 |
227-9231 Seat Gp -Cloth, Air
| 14***21 | Kit-Clip; (Seat) | 1 |
| 20***48 | Absorber As-Shock; (Sideshift) | 1 |
| 22***31 | Seat Group; -Cloth, Air | 1 |
196-5456 Tank Gp-Window Washer
| 12***13 | Tank | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 19***56 | Tank Group-Window Washer | 1 |
189-2119 Visor Gp-Cab
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 2 |
| 14***40 | Visor-Sun | 1 |
| 18***19 | Visor Group-Cab | 1 |
190-2196 Window Gp-Cab
| 19***96 | Window Group-Cab | 1 |
| 19***61 | Glass-Window; (Front) | 1 |
| 19***62 | Glass-Window; (Rear) | 1 |
185-4709 Wiper Gp-Window
| 12***03 | Arm-Window Wiper; (Front Window) | 1 |
| 14***49 | Motor Group-Window Wiper; -Front | 1 |
| 18***09 | Wiper Group-Window | 1 |
Power Train
231-8982 Accumulator Gp-Hydraulic -Uncharged
| 13***65 | Screw | 1 |
| 13***66 | Seal | 1 |
| 20***68 | Cap-Dust | 1 |
231-2103 Accumulator Gp-Hydraulic -Charged
| 23***03 | Accumulator Group-Hydraulic; -Charged | 1 |
241-9756 Actuator Gp-Pump -Hydrostatic Drive
| 12***86 | Retainer | 2 |
| 13***62 | Lever As | 1 |
| 13***63 | Valve | 1 |
157-0212 Actuator Gp-Pump -Hydrostatic Drive
| 12***86 | Retainer | 2 |
| 13***62 | Lever As | 1 |
| 13***63 | Valve | 1 |
152-9137 Actuator Gp-Pump -Hydrostatic Drive
| 11***42 | Nut; (M16x1.5-mm-Thd) | 1 |
| 11***44 | Seal-O-Ring | 2 |
| 12***81 | Rod | 1 |
176-9866 Cooler Gp-Transmission Oil
| 17***66 | Cooler Group-Transmission Oil | 1 |
| 23***67 | Core As-Power Train Oil Cooler | 1 |
| 5P***23 | Seal 3.212 M(126.46 In.) | 0 |
115-1492 Cover Gp-Pump
| 11***20 | Spring | 1 |
| 11***50 | Cover | 1 |
| 11***92 | Cover Group-Pump; -Hydrostatic Piston Pump | 1 |
241-9758 Cover Gp-Pump
| 11***20 | Spring | 1 |
| 24***58 | Cover Group-Pump | 1 |
| 24***59 | Cover | 1 |
110-0924 Drive Gp-Flexible Coupling
| 11***24 | Drive Group-Flexible Coupling | 1 |
| 11***71 | Driver | 1 |
| 4B***44 | Rivet | 5 |
208-6539 Drive Gp-Pump -Hydrostatic
| 14***45 | Filler Group-Power Train Oil | 1 |
| 20***39 | Drive Group-Pump; -Hydrostatic | 1 |
| 26***80 | Drive Group-Pump; -Hydrostatic | 1 |
267-7180 Drive Gp-Pump -Hydrostatic
| 14***39 | Tube As | 1 |
| 14***78 | Gauge-Oil Level (Dipstick); (Pump Drive)(Pump Drive) | 1 |
| 17***07 | Gear; (73-Teeth) | 1 |
176-9778 Drive Gp-Pump -Hydrostatic
| 14***39 | Tube As | 1 |
| 14***78 | Gauge-Oil Level (Dipstick); (Pump Drive)(Pump Drive) | 1 |
| 17***61 | Housing As | 1 |
143-9245 Filler Gp-Power Train Oil
| 11***18 | Valve-Drain; (Hydraulic Tank) | 1 |
| 14***37 | Tube As | 1 |
| 14***45 | Filler Group-Power Train Oil | 1 |
205-8020 Filter & Mtg Gp-Power Train
| 11***33 | Bracket As | 1 |
| 20***20 | Filter & Mtg Group-Power Train | 1 |
| 20***99 | Filter Group-Oil; -Power Train-Charge | 1 |
206-0164 Filter & Mtg Gp-Power Train
| 12***84 | Spacer; (11x25x36-mm Thk) | 1 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 5 |
| 20***64 | Filter & Mtg Group-Power Train | 1 |
232-1864 Filter Gp-Oil -Power Train-Charge
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 22***18 | Filter-Oil; (Ultra High Efficiency)(Power Train) | 1 |
| 22***44 | Switch Group-Diff Pressure; (Hydraulic) | 1 |
209-5641 Filter Gp-Oil -Power Train-Case Drain
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 20***41 | Filter Group-Oil; -Power Train-Case Drain | 1 |
209-5599 Filter Gp-Oil -Power Train-Charge
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 20***99 | Filter Group-Oil; -Power Train-Charge | 1 |
226-3330 Final Drive & Brake Gp -Waste Handling
| 11***33 | Cone-Bearing | 2 |
| 11***34 | Cup-Bearing | 2 |
| 11***35 | Cone-Bearing | 2 |
230-8761 Final Drive & Brake Gp
| 22***85 | Hub As | 2 |
| 23***61 | Final Drive & Brake Group | 1 |
| 4M***36 | Seal (Rubber) | 2 |
183-7006 Final Drive & Brake Gp
| 11***33 | Cone-Bearing | 2 |
| 11***34 | Cup-Bearing | 2 |
| 11***35 | Cone-Bearing | 2 |
128-6174 Head Gp-Motor -Hydrostatic Drive
| 12***74 | Head Group-Motor; -Hydrostatic Drive | 1 |
| 13***24 | Bushing | 1 |
225-1420 Head Gp-Pump -Hydrostatic Drive
| 12***94 | Plug; (Break Off) | 1 |
| 12***56 | Cap | 1 |
| 12***77 | Bushing-Coupling | 1 |
267-6636 Lines Gp-Charge Pressure
| 12***95 | Block | 1 |
| 12***85 | Flange | 2 |
| 12***27 | Elbow | 1 |
209-4341 Lines Gp-Charge Pressure
| 10***59 | Spacer; (13.5-mm Thk) | 1 |
| 12***95 | Block | 1 |
| 12***85 | Flange | 1 |
267-7200 Lines Gp-Control
| 03***57 | Washer; (13x26x6-mm Thk) | 3 |
| 06***51 | Clamp | 3 |
| 09***56 | Hose Assem. | 1 |
209-4343 Lines Gp-Control
| 03***57 | Washer; (13x26x6-mm Thk) | 3 |
| 11***14 | Hose As | 1 |
| 11***22 | Tube As | 1 |
209-4340 Lines Gp-Drain
| 13***84 | Bracket | 2 |
| 14***35 | Connect Group; (Each Includes) | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
267-6701 Lines Gp-Drain
| 10***05 | Tee-O-Ring | 1 |
| 14***23 | Hose As | 1 |
| 14***27 | Connector Group | 1 |
267-6551 Lines Gp-Hydrostatic
| 03***57 | Washer; (13x26x6-mm Thk) | 20 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 12 |
| 21***02 | Block | 2 |
234-5625 Lines Gp-Hydrostatic
| 03***57 | Washer; (13x26x6-mm Thk) | 24 |
| 14***08 | Plug As. | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 14 |
233-1451 Lines Gp-Power Train Cooler
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***52 | Elbow As. | 1 |
176-7188 Lines Gp-Synchronizing
| 14***16 | Connector Group | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
217-6072 Lines Gp-Synchronizing
| 12***84 | Hose As | 1 |
| 13***93 | Hose As | 1 |
| 14***16 | Connector Group | 1 |
206-0163 Motor & Mtg Gp-Travel -Hydrostatic Drive
| 14***09 | Adapter As | 2 |
| 15***65 | Elbow; (Spl) | 3 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 6 |
268-3283 Motor & Mtg Gp-Travel -Hydrostatic Drive
| 14***09 | Adapter As | 2 |
| 15***65 | Elbow; (Spl) | 3 |
| 15***27 | Tee Group; (Each Includes) | 2 |
9t-1346 Motor Gp-Piston -Hydrostatic Drive
| 12***79 | Setscrew-Socket; (M12x1.75-Thd) | 1 |
| 12***72 | Rotating Group-Motor; -Hydrostatic Drive | 1 |
| 12***73 | Housing As | 1 |
171-7615 Power Train Ar
| 11***24 | Drive Group-Flexible Coupling | 1 |
| 17***15 | Power Train Ar | 1 |
| 17***88 | Lines Group-Synchronizing | 1 |
226-3310 Power Train Ar -Waste Handling
| 22***10 | Power Train Ar; -Waste Handling | 1 |
| 22***30 | Final Drive & Brake Group; -Waste Handling | 1 |
208-6543 Pump & Mtg Gp-Power Train
| 11***55 | Coupling | 1 |
| 15***65 | Elbow; (Spl) | 1 |
| 15***46 | Adapter Group | 2 |
205-8018 Pump & Mtg Gp-Power Train
| 20***18 | Pump & Mtg Group-Power Train; -Hydrostatic Drive | 1 |
| 24***72 | Pump Group-Piston; -Hydrostatic Drive | 2 |
| 7X***15 | Washer-Hard; (17x35x5-mm Thk) | 8 |
152-9890 Pump Gp-Charge -Hydrostatic Drive
| 12***77 | Bushing-Coupling | 1 |
| 14***09 | Ring | 1 |
| 15***90 | Pump Group-Charge; -Hydrostatic Drive | 1 |
172-1231 Pump Gp-Gear -Hydrostatic Drive-Charge
| 09***95 | Pin, Dowel | 2 |
| 13***90 | Cover | 1 |
| 13***77 | Flange | 1 |
249-8572 Pump Gp-Piston -Hydrostatic Drive
| 11***64 | Orifice | 1 |
| 12***75 | Screw-Lock | 1 |
| 12***82 | Pin-Threaded | 1 |
239-0724 Pump Gp-Piston -Hydrostatic Drive, Lh
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 1 |
| 10***65 | Bolt-Socket Head; (M8x1.25x20-mm) | 4 |
| 10***82 | Bolt-Socket Head; (M8x1.25x16-mm) | 2 |
231-0902 Pump Gp-Piston -Hydrostatic Drive, Lh
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 1 |
| 10***65 | Bolt-Socket Head; (M8x1.25x20-mm) | 4 |
| 10***82 | Bolt-Socket Head; (M8x1.25x16-mm) | 2 |
239-0723 Pump Gp-Piston -Hydrostatic Drive, Rh
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 1 |
| 10***65 | Bolt-Socket Head; (M8x1.25x20-mm) | 4 |
| 10***82 | Bolt-Socket Head; (M8x1.25x16-mm) | 2 |
231-0901 Pump Gp-Piston -Hydrostatic Drive, Rh
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 1 |
| 10***65 | Bolt-Socket Head; (M8x1.25x20-mm) | 4 |
| 10***82 | Bolt-Socket Head; (M8x1.25x16-mm) | 2 |
128-6172 Rotating Gp-Motor -Hydrostatic Drive
| 12***72 | Rotating Group-Motor; -Hydrostatic Drive | 1 |
| 12***14 | Nut; (M6x2 Thd) | 1 |
| 12***15 | Bearing | 1 |
250-1902 Rotating Gp-Pump -Hydrostatic Drive
| 11***70 | Ring-Retaining | 1 |
| 12***00 | Piston As | 9 |
| 12***01 | Spring Set | 1 |
215-7172 Segment Gp-Sprocket
| 19***72 | Nut-Square; (M16x1.5 Thd) | 25 |
| 19***72 | Segment-Sprocket | 5 |
| 19***74 | Bolt; (M16x1.5x60mm) | 25 |
183-2808 Valve & Mtg Gp-Control -Hydrostatic Transmission
| 12***60 | Plug | 20 |
| 14***67 | Elbow | 1 |
| 14***68 | Elbow As | 1 |
197-0383 Valve & Mtg Gp-Solenoid -Brake, Steering, Transmission
| 15***85 | Valve Group-Solenoid; -Hydraulic Oil Cooler Shutoff | 1 |
| 18***08 | Valve & Mtg Group-Control; -Hydrostatic Transmission | 1 |
| 19***39 | Valve Group-Solenoid; -Pressure Reducing | 4 |
131-2938 Valve Gp-Pilot -Hydrostatic Drive
| 13***55 | Plug | 1 |
| 13***56 | Ring-Retaining | 1 |
| 13***57 | Piston | 1 |
217-1390 Valve Gp-Pump Control -Hydrostatic Drive
| 08***39 | Seal-O-Ring (Id=26.64mm) | 2 |
| 12***63 | Seal-O-Ring | 2 |
| 19***54 | Spring | 2 |
157-3843 Valve Gp-Relief -Charge Pressure
| 15***43 | Valve Group-Relief; -Charge Pressure | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3G***54 | Cap | 1 |
131-2604 Valve Gp-Relief -Flushing-Hydrostatic Drive
| 13***18 | Plug | 1 |
| 13***19 | Spring | 1 |
| 13***20 | Plug-Orifice | 1 |
131-2605 Valve Gp-Shuttle -Flushing-Hydrostatic Drive
| 13***14 | Plug | 1 |
| 13***15 | Spring | 2 |
| 13***05 | Valve Group-Shuttle; -Flushing-Hydrostatic Drive | 1 |
130-6913 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 13***13 | Valve Group-Solenoid | 1 |
208-5374 Valve Gp-Synchronizing -Drive Pump
| 13***13 | Valve Group-Solenoid | 1 |
| 17***93 | Plug As | 1 |
| 18***47 | Coupler As-Quick Disconnect | 4 |
Service Equipment And Supplies
5g-3612 Cap Gp-Protection -Fuel Tank
| 1P***80 | Cap-Filler; (Fuel Tank) | 1 |
| 3B***15 | Pin,Cotter Governor And Decelerator Control | 2 |
| 4J***05 | Shim; (0.79-mm Thk)(.031 In Thk) | 1 |
234-1864 Film Gp
| 23***64 | Film Group | 1 |
| 23***47 | Film-Stripe; (953c)(Lh) | 1 |
| 23***48 | Film-Stripe; (953c)(Rh) | 1 |
237-1966 Film Gp -Waste Handling
| 23***47 | Film-Stripe; (953c)(Lh) | 1 |
| 23***48 | Film-Stripe; (953c)(Rh) | 1 |
| 23***49 | Film-Stripe; (Cat, Lh)(Lh) | 1 |
176-9893 Plate & Film Gp -Italian
| 17***93 | Plate & Film Group; -Italian | 1 |
| 20***94 | Film-Notice; (Radio) | 1 |
| 23***52 | Film; (Cab Removal) | 1 |
176-9899 Plate & Film Gp -Swedish
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 12***17 | Film-Instruction; (Machine Calibration Switches) | 1 |
| 13***90 | Film-Instruction; (Air Conditioner) | 1 |
250-5572 Plate & Film Gp -U.S.
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 15***02 | Film-Identification; (Hydraulic Test Ports)(Drive Loop Pressure Ports) | 1 |
| 15***64 | Film; (Instruction) (Hydraulic Oil) (On Forward Of And Above The Hydraulic Tank Sight Gage On Tank Surface) | 1 |
176-9900 Plate & Film Gp -Finnish
| 10***09 | Film-Warning; (Jumper Cables) | 1 |
| 10***30 | Plate-Warning; (Do Not Operate) | 1 |
| 10***87 | Film-Notice; ( Window Cleaning) | 1 |
176-9895 Plate & Film Gp -Greek
| 12***14 | Film-Instruction; (Machine Calibration Switches) | 1 |
| 13***87 | Film-Instruction; (Air Conditioner) | 1 |
| 17***95 | Plate & Film Group; -Greek | 1 |
254-7207 Plate & Film Gp -International
| 22***45 | Film-Warning; (Seat Belt, International) | 1 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
| 22***12 | Film; (Warning) (Jump Start) (On Outside Of Battery Compartment Door) | 1 |
176-9890 Plate & Film Gp -Spanish
| 11***61 | Film - Air Cleaner (Later Machines Only) | 1 |
| 12***09 | Film-Instruction; (Machine Calibration Switches) | 1 |
| 17***90 | Plate & Film Group; -Spanish | 1 |
176-9891 Plate & Film Gp -Portuguese
| 17***91 | Plate & Film Group; -Portuguese | 1 |
| 20***96 | Film-Notice; (Radio) | 1 |
| 21***75 | Film-Warning; (Elc) | 1 |
176-9894 Plate & Film Gp -Danish
| 11***58 | Film - Air Cleaner (Later Machines Only) | 1 |
| 13***86 | Film-Instruction; (Air Conditioner) | 1 |
| 17***94 | Plate & Film Group; -Danish | 1 |
176-9892 Plate & Film Gp -German
| 12***11 | Film-Instruction; (Machine Calibration Switches) | 1 |
| 17***92 | Plate & Film Group; -German | 1 |
| 19***07 | Film-Notice; (Radio) | 1 |
176-9889 Plate & Film Gp -French
| 17***89 | Plate & Film Group; -French | 1 |
| 19***06 | Film-Notice; (Radio) | 1 |
| 23***49 | Film; (Cab Removal) | 1 |
176-9771 Plate & Film Gp
| 15***02 | Film-Identification; (Hydraulic Test Ports)(Drive Loop Pressure Ports) | 1 |
| 17***71 | Plate & Film Group | 1 |
| 19***38 | Film; (Warning) (Coolant) (To Right Side Of Radiator Fill Cover) | 1 |
205-8000 Plate & Film Gp -Norwegian
| 10***08 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***29 | Plate-Warning; (Do Not Operate) | 1 |
| 10***86 | Film-Notice; (Window Cleaning)(Window Cleaning) | 1 |
176-9896 Plate & Film Gp -Dutch
| 11***55 | Film-Air Cleaner (Later Amchines Only) | 1 |
| 12***93 | Film-Notice; (Bucket Corner Guard) | 1 |
| 12***15 | Film-Instruction; (Machine Calibration Switches) | 1 |
176-9897 Plate & Film Gp -Japanese
| 11***56 | Film-Information; (Radial Seal) | 1 |
| 12***91 | Plate-Warning; (High Pressure Cylinder) | 4 |
| 12***16 | Film-Instruction; (Machine Calibration Switches) | 1 |
192-4885 Protection Gp-Vandalism -Dashboard
| 12***78 | Locknut; (M6x1-Thd) | 3 |
| 19***85 | Protection Group-Vandalism; -Dashboard | 1 |
| 19***92 | Hinge As | 1 |
Steering And Braking System
267-6688 Lines Gp-Brake
| 11***98 | Tube As | 1 |
| 13***69 | Hose As | 1 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 1 |
176-9775 Lines Gp-Brake
| 11***98 | Tube As | 1 |
| 11***01 | Hose As | 1 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 1 |
Undercarriage
236-7889 Adjustment Gp-Hydraulic Track
| 23***89 | Adjustment Group-Hydraulic Track | 1 |
| 2J***74 | Seal-O-Ring; 9.12mm(.36in) Id | 1 |
| 3W***15 | Cylinder As | 1 |
346-2872 Bar Gp-Equalizer
| 34***72 | Bar Group-Equalizer | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
| 3W***62 | Bar As | 1 |
223-9102 Cap Gp-Track Roller -Systemone
| 22***02 | Cap Group-Track Roller; -Systemone | 1 |
| 22***10 | Cap-Track Roller | 2 |
| 5P***47 | Washer (Bracket To Valve Support) | 4 |
3w-7561 Bar Gp-Equalizer
| 31***54 | Housing As | 2 |
| 31***55 | Pad As | 2 |
| 34***72 | Bar Group-Equalizer | 1 |
176-9808 Frame Gp-Track Roller
| 17***08 | Frame Group-Track Roller | 1 |
| 18***32 | Frame As-Track Roller; (Rh) | 1 |
| 18***33 | Frame As-Track Roller; (Lh) | 1 |
250-7782 Guard Gp-Track
| 25***18 | Plate | 1 |
| 25***19 | Plate | 1 |
| 25***82 | Guard Group-Track | 1 |
176-9807 Guard Gp-Track Guide -Rotating Bushing Tracks
| 17***07 | Guard Group-Track Guide; -Rotating Bushing Tracks | 1 |
| 18***17 | Guard; (Lh Inner/Rh Outer) | 2 |
| 18***18 | Guard; (Lh Outer/Rh Inner) | 2 |
3w-7581 Guard Gp-Track Guide
| 3W***81 | Guard Group-Track Guide | 1 |
| 7X***75 | Bolt-Plt; (M16 X 2.0 X 130) | 8 |
| 8T***22 | Washer-Hard-To Lock Carrier Rollers | 16 |
241-2413 Guard Gp-Track Roller
| 24***13 | Guard Group-Track Roller | 1 |
| 24***15 | Guard As | 2 |
| 24***16 | Guard As | 2 |
283-9242 Idler Gp -Rh
| 16***13 | Shaft-Track Idler | 1 |
| 16***21 | Link As; (Inner, Lh; Outer, Rh) | 1 |
| 16***23 | Link As; (Inner, Rh; Outer, Lh) | 1 |
283-9241 Idler Gp -Lh
| 16***13 | Shaft-Track Idler | 1 |
| 16***21 | Link As; (Inner, Lh; Outer, Rh) | 1 |
| 16***23 | Link As; (Inner, Rh; Outer, Lh) | 1 |
282-1552 Idler Gp-Front -Systemone
| 23***67 | Spring | 2 |
| 23***89 | Adjustment Group-Hydraulic Track | 2 |
| 25***49 | Shim; (8-mm Thk) | 4 |
3w-7485 Idler Gp-Front
| 16***13 | Shaft-Track Idler | 2 |
| 16***21 | Link As; (Inner, Lh; Outer, Rh) | 2 |
| 16***23 | Link As; (Inner, Rh; Outer, Lh) | 2 |
207-9528 Idler Gp-Front -Rotating Bushing Tracks
| 16***13 | Shaft-Track Idler | 2 |
| 16***21 | Link As; (Inner, Lh; Outer, Rh) | 2 |
| 16***23 | Link As; (Inner, Rh; Outer, Lh) | 2 |
257-7045 Idler Gp-Front
| 25***45 | Idler Group-Front | 1 |
| 25***81 | Plate | 4 |
| 25***49 | Shim; (8-mm Thk) | 4 |
243-0499 Link As-Track -Systemone
| 23***01 | Link-Track | 34 |
| 23***09 | Link As-Track Box; -Link Box | 17 |
| 24***99 | Link As-Track; (Systemone) | 1 |
230-7272 Link As-Track
| 16***18 | Pin-Track | 37 |
| 22***09 | Link-Track; (Rh) | 36 |
| 22***10 | Link-Track; (Lh) | 36 |
152-8044 Link As-Track -Rotating Bushing Track
| 10***25 | Track Link; (R.H.) | 1 |
| 10***26 | Track Link; (L.H.) | 1 |
| 10***27 | Link (Master) (R.H. Pin End) | 1 |
246-5753 Link As-Track -Systemone
| 23***01 | Link-Track | 36 |
| 23***09 | Link As-Track Box; -Link Box | 18 |
| 24***00 | Link As-Track Box; -Link Box, Offset | 1 |
264-9764 Link As-Track Box -Link Box
| 26***64 | Link As-Track Box; -Link Box | 1 |
| 29***22 | Cartridge As-Track Link | 2 |
| 6Y***73 | Plug; (Clear) | 2 |
243-0500 Link As-Track Box -Link Box, Offset
235-2509 Link As-Track Box -Link Box
| 23***01 | Link-Track | 2 |
| 23***07 | Cartridge As-Track Link | 2 |
| 23***09 | Link As-Track Box; -Link Box | 1 |
298-2723 Link As-Track Box -Link Box
| 23***01 | Link-Track | 2 |
| 29***22 | Cartridge As-Track Link | 2 |
| 29***23 | Link As-Track Box; -Link Box | 1 |
264-9769 Link As-Track Box -Link Box, Offset
| 26***64 | Link As-Track Box; -Link Box | 1 |
| 26***69 | Link As-Track Box; -Link Box, Offset | 1 |
| 29***22 | Cartridge As-Track Link | 1 |
298-2724 Link As-Track Box -Link Box, Offset
| 29***22 | Cartridge As-Track Link | 1 |
| 29***23 | Link As-Track Box; -Link Box | 1 |
| 29***24 | Link As-Track Box; -Link Box, Offset | 1 |
258-2167 Modification Ar-Undercarriage -Systemone
| 22***02 | Cap Group-Track Roller; -Systemone | 12 |
| 22***46 | Roller Group-Track Carrier; -Systemone | 2 |
| 24***57 | Roller Group-Track-Single Flange; -Systemone | 12 |
183-7016 Modification Ar-Undercarriage
| 17***07 | Guard Group-Track Guide; -Rotating Bushing Tracks | 1 |
| 18***16 | Modification Ar-Undercarriage | 1 |
| 20***28 | Idler Group-Front; -Rotating Bushing Tracks | 1 |
237-6227 Pivot Bar Gp -Waste Handling
| 23***27 | Pivot Bar Group; -Waste Handling | 1 |
| 25***71 | Cover | 2 |
| 26***91 | Seal-Football | 2 |
8y-5342 Pivot Bar Gp
| 2H***28 | Seal-Top Cover & Filter Group | 2 |
| 3W***49 | Plate | 2 |
| 3W***51 | Shaft As (Each Includes) | 2 |
6y-3908 Roller Gp-Track Carrier
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 3 |
| 12***47 | Bearing As-Special | 2 |
| 1H***20 | Seal-O-Ring; (59.92mm Id) | 1 |
229-5446 Roller Gp-Track Carrier -Systemone
| 22***46 | Roller Group-Track Carrier; -Systemone | 1 |
121-0827 Roller Gp-Track-Double Flange
| 12***27 | Roller Group-Track-Double Flange | 1 |
| 12***28 | Rim As-Double Flange | 1 |
| 12***34 | Bushing Assem. | 2 |
125-4173 Roller Gp-Track-Double Flange
| 12***27 | Roller Group-Track-Double Flange | 1 |
| 12***73 | Roller Group-Track-Double Flange; (Double Flange) | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 4 |
125-4172 Roller Gp-Track-Single Flange
| 12***24 | Roller Group-Track-Single Flange | 1 |
| 12***72 | Roller Group-Track-Single Flange; (Single Flange) | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 4 |
121-0824 Roller Gp-Track-Single Flange
| 12***24 | Roller Group-Track-Single Flange | 1 |
| 12***25 | Rim As-Single Flange | 1 |
| 12***34 | Bushing Assem. | 2 |
240-9557 Roller Gp-Track-Single Flange -Systemone
| 24***57 | Roller Group-Track-Single Flange; -Systemone | 1 |
256-4992 Track Gp -2-Required, Systemone
| 23***19 | Link-Track Master | 2 |
| 24***99 | Link As-Track; (Systemone) | 1 |
| 24***01 | Shoe-Track | 36 |
230-7274 Track Gp -2 Required
| 1M***08 | Nut-Track | 144 |
| 23***69 | Shoe-Track | 37 |
| 23***72 | Link As-Track | 1 |
187-2009 Track Gp -2 Required
| 10***42 | Bolt-Track Master; (3/4-16x2.9-In) | 2 |
| 10***19 | Bolt-Track Master; (3/4-16x3.9-In) | 2 |
| 15***44 | Link As-Track; -Rotating Bushing Track | 1 |
300-3662 Track Gp -2-Required, Systemone
| 23***01 | Link-Track | 2 |
| 24***99 | Link As-Track; (Systemone) | 1 |
| 30***58 | Shoe-Track | 37 |
187-2010 Track Gp -2 Required
| 10***42 | Bolt-Track Master; (3/4-16x2.9-In) | 2 |
| 10***19 | Bolt-Track Master; (3/4-16x3.9-In) | 2 |
| 15***44 | Link As-Track; -Rotating Bushing Track | 1 |
256-4993 Track Gp -2-Required, Systemone
| 23***19 | Link-Track Master | 2 |
| 24***99 | Link As-Track; (Systemone) | 1 |
| 24***34 | Shoe-Track | 36 |
230-7273 Track Gp -2 Required
| 1M***08 | Nut-Track | 144 |
| 23***77 | Shoe-Track | 37 |
| 23***72 | Link As-Track | 1 |
300-3661 Track Gp -2-Required, Systemone
| 23***01 | Link-Track | 2 |
| 24***99 | Link As-Track; (Systemone) | 1 |
| 30***60 | Water Transfer Tube, Shoe-Track | 37 |
243-0495 Track Gp -2-Required, Systemone
| 23***01 | Link-Track | 2 |
| 24***95 | Track Group; -2-Required, Systemone | 1 |
| 24***99 | Link As-Track; (Systemone) | 1 |
244-4535 Track Gp -2-Required, Systemone
| 23***01 | Link-Track | 2 |
| 24***99 | Link As-Track; (Systemone) | 1 |
| 24***34 | Shoe-Track | 37 |
300-3663 Track Gp -2-Required, Systemone
| 23***19 | Link-Track Master | 2 |
| 24***99 | Link As-Track; (Systemone) | 1 |
| 25***25 | Bolt-Track Master; (M20x1.5x101-mm) | 4 |
226-3312 Undercarriage Ar -Waste Handling
| 22***12 | Undercarriage Ar; -Waste Handling | 1 |
| 23***27 | Pivot Bar Group; -Waste Handling | 1 |
| 25***82 | Guard Group-Track | 1 |
283-4642 Undercarriage Ar -Systemone
| 25***82 | Guard Group-Track | 1 |
| 26***76 | Guard Group-Idler; -Systemone | 1 |
| 28***42 | Undercarriage Ar; -Systemone | 1 |
256-2769 Undercarriage Ar -Systemone
| 24***95 | Track Group; -2-Required, Systemone | 2 |
| 25***69 | Undercarriage Ar; -Systemone | 1 |
| 25***67 | Modification Ar-Undercarriage; -Systemone | 1 |
171-7618 Undercarriage Ar
| 12***72 | Roller Group-Track-Single Flange; (Single Flange) | 8 |
| 12***73 | Roller Group-Track-Double Flange; (Double Flange) | 4 |
| 17***18 | Undercarriage Ar | 1 |
257-7058 Undercarriage Ar -Systemone
| 24***35 | Track Group; -2-Required, Systemone | 2 |
| 25***58 | Undercarriage Ar; -Systemone | 1 |
| 25***67 | Modification Ar-Undercarriage; -Systemone | 2 |
282-1553 Undercarriage Ar -Systemone
| 17***08 | Frame Group-Track Roller | 1 |
| 22***02 | Cap Group-Track Roller; -Systemone | 12 |
| 22***46 | Roller Group-Track Carrier; -Systemone | 2 |
Work Tools
3g-4428 Edge Gp-Bit & Cutting
| 1J***07 | Bolt 6.99cm (2.75 In.) Long | 10 |
| 1U***95 | Edge-Cutting | 2 |
| 25***62 | Guard; (Corner, Rh)(Corner, Rh) | 1 |
198-8398 Bucket Ar-Multipurpose
| 19***98 | Bucket Ar-Multipurpose | 1 |
| 19***99 | Bucket Group-Multipurpose; -Trash | 1 |
| 5G***59 | Lines Group-Bucket | 1 |
8y-9100 Bucket As-General Purpose
| 18***91 | Plate | 2 |
| 5V***95 | Corner (L. H.) | 1 |
| 5V***96 | Corner (R. H.) | 1 |
258-6897 Bucket As-General Purpose
| 18***91 | Plate | 2 |
| 25***97 | Bucket As-General Purpose | 1 |
| 25***98 | Plate As; (Lh) | 1 |
258-6900 Bucket As-General Purpose
| 18***91 | Plate | 2 |
| 1V***16 | Edge-Cutting | 1 |
| 22***84 | Adapter-Tip; -Flush Mount | 8 |
8y-9101 Bucket As-General Purpose
| 1U***04 | Adapter-Tip | 8 |
| 1V***16 | Edge-Cutting | 1 |
| 4V***67 | Corner-Rh; (R.H.) | 1 |
264-3280 Bucket Gp-Multipurpose
| 26***80 | Bucket Group-Multipurpose | 1 |
| 26***84 | Bowl As | 1 |
| 26***86 | Plate As; (Rh) | 1 |
198-8399 Bucket Gp-Multipurpose
| 14***53 | Bowl As, Ring, Ring; Replaces 420620a1 | 1 |
| 19***99 | Bucket Group-Multipurpose; -Trash | 1 |
| 1V***98 | Bearing-Sleeve | 4 |
264-3279 Bucket Gp-Multipurpose
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 16***72 | Plate-Information; (Multipurpose Bucket) | 1 |
| 26***79 | Bucket Group-Multipurpose | 1 |
265-6475 Bulldozer Gp
| 1V***98 | Bearing-Sleeve | 4 |
| 1V***98 | Block | 4 |
| 26***75 | Bulldozer Group | 1 |
133-0687 Edge Gp-Cutting
| 13***35 | Edge-Segment | 7 |
| 13***87 | Edge Group-Cutting | 1 |
| 1J***07 | Bolt 6.99cm (2.75 In.) Long | 14 |
7t-9325 Edge Gp-Cutting
| 1J***07 | Bolt 6.99cm (2.75 In.) Long | 14 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 14 |
| 4T***94 | Edge; (Segment) | 7 |
264-6235 Edge Gp-Segment
| 1J***07 | Bolt 6.99cm (2.75 In.) Long | 14 |
| 26***33 | Edge-Segment | 7 |
| 26***35 | Edge Group-Segment | 1 |
3g-1349 Mounting Gp-Ripper
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 8 |
| 3G***66 | Spacer 18mm (.709 In.) Thick | 2 |
| 3G***49 | Mounting Group-Ripper; Ripper Mounting Group | 1 |
155-1518 Ripper Ar
| 15***18 | Ripper Ar | 1 |
| 15***36 | Ripper Ar | 1 |
156-5736 Ripper Ar
| 15***64 | Lines Group-Ripper | 1 |
| 15***36 | Ripper Ar | 1 |
| 3G***49 | Mounting Group-Ripper; Ripper Mounting Group | 1 |
9j-4329 Ripper Gp
| 2K***79 | Boss | 2 |
| 2M***59 | Bar | 2 |
| 3G***70 | Carriage Assem. | 1 |
259-5590 Tip Gp-Extra-Duty -K-80
| 22***89 | Tip-General Purpose; (K-80) | 8 |
| 22***90 | Retainer-G.E.T. | 8 |
| 25***90 | Tip Group-Extra-Duty; -K-80 | 1 |
8y-9567 Tip Gp-Long
| 8Y***67 | Tip Group-Long | 1 |
| 9J***67 | Tip Group-Long; -J-300 | 8 |
9j-3167 Tip Gp-Long -J-300
| 10***08 | Pin-G.E.T. | 1 |
| 1U***02 | Tip ( Long ) | 1 |
| 8E***59 | Retainer Assem. | 1 |
8e-3751 Tip Gp-Long -J-300, Heavy-Duty
| 10***08 | Pin-G.E.T. | 1 |
| 8E***51 | Tip Group-Long; -J-300, Heavy-Duty | 1 |
| 8E***59 | Retainer Assem. | 1 |
257-1749 Tip Gp-Penetration -K-80
| 22***82 | Tip-Penetration; (K-80) | 8 |
| 22***90 | Retainer-G.E.T. | 8 |
| 22***88 | Adapter-Tip; (K-80, Rh) | 1 |
8y-9566 Tip Gp-Short
| 8Y***66 | Tip Group-Short | 1 |
| 9J***75 | Tip Group-Short; -J-300 | 8 |
9j-3175 Tip Gp-Short -J-300
| 10***08 | Pin-G.E.T. | 1 |
| 1U***01 | Tip ( Short ) | 1 |
| 8E***59 | Retainer Assem. | 1 |
257-1747 Tooth Gp-Long -K-80, Extra-Duty
| 22***81 | Tip-Extra-Duty; (K-80) | 8 |
| 22***90 | Retainer-G.E.T. | 8 |
| 22***88 | Adapter-Tip; (K-80, Rh) | 1 |
133-0686 Tooth Gp-Long -K-80, Heavy Penetration
| 13***86 | Tooth Group-Long; -K-80, Heavy Penetration | 1 |
| 1U***07 | Adapter (Bolted On) | 6 |
| 3G***08 | Adapter-Strap; (Lh) | 1 |
257-1748 Tooth Gp-Long -K-80
| 22***89 | Tip-General Purpose; (K-80) | 8 |
| 22***90 | Retainer-G.E.T. | 8 |
| 22***88 | Adapter-Tip; (K-80, Rh) | 1 |
1u-0629 Tooth Gp-Long
| 1U***07 | Adapter (Bolted On) | 6 |
| 1U***29 | Tooth Group-Long | 1 |
| 3G***08 | Adapter-Strap; (Lh) | 1 |
9j-1137 Tooth Gp-Ripper
| 13***63 | Pin-G.E.T. | 1 |
| 14***33 | Retainer As; (G.E.T.) | 1 |
| 1U***57 | Shank-Ripper | 1 |
1u-0630 Tooth Gp-Short
| 1U***07 | Adapter (Bolted On) | 6 |
| 1U***30 | Tooth Group-Short | 1 |
| 3G***08 | Adapter-Strap; (Lh) | 1 |
953C serial number reference
The PIN plate is riveted to the loader frame near the operator's station, typically on the right-hand side by the cab entry or on the frame rail under the hood area, and is stamped/etched into the rear frame near the drawbar as a backup location. Pre-2001 machines show an 8-character PIN starting with the 3-letter prefix (e.g., 2ZN01056); 2001-and-newer machines show the full 17-character PIN with the 3-letter prefix embedded in positions 4-6 (e.g., CAT0953CEBBX02507).
| Prefix | Identifies | Notes |
|---|---|---|
| 2ZN | 953C Track-Type Loader, hydrostatic drive, powered by the 3116 engine | Runs 2ZN00001-UP. A running change at 2ZN01750-UP adds a High Ambient radiator option and revises a hydraulic valve group. Earliest 953C production; field examples date to 1996-1997. |
| BBX | 953C Track-Type Loader, hydrostatic drive, powered by the 3126B engine | Runs BBX00001-UP, the later 953C production run after the engine changed from 3116 to 3126B. A running change at BBX2619-UP affects SystemOne/waste-handling conversion group compatibility. Field examples run roughly 1999/2000 through 2006-2007, the tail end of 953C output before the 953D. |
Frequently asked questions
What engine does the Caterpillar 953C use?
It depends on the serial prefix. Early-production 953C machines (2ZN prefix) use the Cat 3116 or turbocharged 3116T inline-six diesel, rated near 90 kW (121 hp) net. Later-production machines (BBX prefix) switched to the larger Cat 3126B ATAAC inline-six, rated near 95 kW (128 hp) net.
What is the operating weight of the Caterpillar 953C?
Operating weight ranges from about 14,455 to 16,656 kg (31,867 to 36,720 lb), depending on bucket type and configuration. The waste-handler (WH) arrangement sits at the top of that range; general-purpose and multi-purpose bucket configurations run lighter.
What replaced the Caterpillar 953C?
Caterpillar replaced the 953C with the 953D, which uses the C6.6 ACERT engine with common-rail fuel delivery and a higher rated output. The 953C itself had replaced the 953B.
What 953C owners discuss
Why does the drive system on a 953C run hot under sustained load, and what usually fixes it?
A climbing temp gauge during heavy bucket-fill or digging work is one of the most repeated complaints on this machine, even when fluid level checks out fine. Root causes trace to a plugged or debris-packed radiator and oil cooler core, a scavenge pump that can't keep up, or leakage inside the torque converter/hydrostatic drive itself. Owners typically work the cheap causes first: pressure-wash the radiator and oil cooler fins from the back side, check fan belt tension and fan operation, and change the transmission filter before suspecting pump or converter wear. On late (ATAAC-engine) production, restricted airflow shows up faster because the aftercooler shares the same cooling package, so a dirty core hits both engine and drive temps together. Given the cost of a hydrostatic pump or torque converter teardown, have your dealer verify the actual root cause with pressure and flow checks before authorizing major drive-system work.
The loader arm is slow to respond or jerks when moving — what's usually behind it?
Sluggish or jerky arm movement is most often worn control spool valves, a tired hydraulic pump, or aerated oil rather than contaminated fluid. Foamy oil in the tank usually means a loose suction-side clamp or a hardened, cracked hose letting air into the pump inlet. If functions only work properly above half throttle, that points to pump wear or a clogged suction screen/filter restricting flow rather than a bad valve. One documented jerking complaint on this model was chased through the transmission and flywheel speed sensors, the high-speed drive solenoid, and the pedal position sensor before it resolved, since drift or miscalibration on the electronic drive control can mimic a hydraulic problem. Because hydrostatic pump or motor replacement is a major expense, have your dealer verify the diagnosis with gauge testing before condemning the pump.
What track and undercarriage wear pattern is typical, and how do owners stretch its life?
As with any track-type loader, correct track tension is the single biggest factor in undercarriage life — running loose or over-tight shortens pad, link, and sprocket-segment wear life fast. Owners are advised to keep ground speed to the minimum needed for the task and to change technique on slopes, since side-loading on grades accelerates wear on rollers, idlers, and links. The sprocket drives individual bolt-on segments, so a worn segment can be swapped without breaking the track chain, which keeps that particular wear item cheaper to manage than link or pad wear. On a used machine, check equalizer-bar ends, the center pin, pivot shafts, track adjusters, and idler guard hardware for looseness — these show hard use well before the tracks themselves look worn out.
Does the engine change across the 953C's production run, and what quirks come with each?
Yes — two distinct engines were fitted. Earlier serial-prefix machines carry the Cat 3116/3116T inline-six; later production switched to the 3126B with air-to-air aftercooling. Owners of the 3116-powered early machines generally call it a low-maintenance, dependable engine when kept clean, though injector sleeve leaks, stop-solenoid reliability, and oil cooler O-ring leaks are known nuisances — the two O-rings at the oil cooler are easy to pinch or twist on reassembly and are a repeat source of external oil weeps. On the later 3126B machines, the HEUI hydraulic-electronic fuel injection system is the main watch item: a failing HEUI pump can send debris downstream and damage injectors, and the factory high-pressure oil supply hose has a documented failure history, with a hard-line conversion used as a fix. The 3126B is also noted as less tolerant of dirty engine oil than the 3116, so oil-change discipline matters more on later machines. On either engine, a blown high-pressure oil line dumps crankcase oil externally and can trigger a low-oil shutdown — have your dealer verify the source before restarting a machine that shut down this way.
What electrical or sensor faults come up most often, and how do owners chase them down?
The electronic drive control throws a fault code whenever a sensor signal falls outside its calibration range or doesn't match an expected state — for example, the direction-lever signal not reading neutral when the park-brake switch is engaged. A no-move complaint with active codes is more often a wiring or connector fault than a bad sensor: unplugging the sensor and installing a jumper in the harness connector should flip the code to a short-to-ground pattern, which confirms the harness is intact and points to the sensor itself as the failed part. Owners also report intermittent faults traced to corroded or loose park-solenoid connectors and blown fuses in the solenoid circuit, so checking grounds and connectors before swapping sensors saves needless parts changes. Because this machine uses electronic drive control rather than a mechanical linkage, a single failed sensor or module can take the whole hydrostatic drive down at once — have your dealer verify the fault code sequence before authorizing ECM or drive pump replacement.
What should I check before buying a used 953C?
Warm the machine fully, then run it straight for a good distance in both directions — if it tracks off to one side by more than a couple feet, suspect a worn drive pump or track motor, a repair expensive enough to walk away from a deal over. Confirm the serial prefix so you know which engine and which hydraulic system configuration you're actually buying, since documentation, fluid capacities, and service parts differ between early and late production. Pull fluid samples for engine oil, hydraulic/transmission oil, and final-drive oil rather than relying on a visual check alone. Inspect equalizer-bar ends, center pin, pivot shafts, track adjusters, idler guards, and sprocket-segment hardware for looseness or missing fasteners. Ask for service records showing regular engine oil, hydraulic filter, and periodic full-service intervals — gaps in that history tend to line up with the expensive final-drive and hydrostatic-pump failures owners report. Have your dealer verify final drive and drive pump condition during a test before committing, since that's the costliest system to get wrong on this machine.
Are the final drives really a weak point on this model, or is that overstated?
Opinions genuinely split in the owner community. Some dealers and operators single out this generation's final drives as a common, costly failure point, and at least one owner reported multiple early warranty claims on final drives and the onboard control computer. Other longtime operators say they've never had a final-drive failure on any Cat track loader they've run and treat the complaint as an isolated batch or maintenance issue rather than a design flaw across the board. Given the split experience and the size of the repair bill if it does fail, treat final-drive condition as a top pre-purchase checkpoint rather than something to assume either way — have your dealer verify final-drive oil condition and sample results before you buy or before committing to a rebuild.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 953C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.