Caterpillartrack-type loaderripper
Caterpillar 953
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 953 is a mid-size track-type (crawler) loader built roughly from 1981 to 1993, predecessor to the later 953B/953C/953D crawler loader line. It runs a Cat 3204 direct-injection, turbocharged four-cylinder diesel rated around 82 kW (110 hp), mechanically governed with no electronic engine controls. Drive is fully hydrostatic: each track gets independent, infinitely variable speed with automatic on-the-go direction change through pedal or lever steering, with no torque converter or powershift gearset in the driveline. Operating weight runs about 14,100 kg (31,080 lb), varying with standard-gauge or LGP (low ground pressure) track configuration. Caterpillar built this machine at plants in the USA, Japan, and France; no earlier Cat model is documented as its direct predecessor. The 953B took over the line afterward, moving up to the larger Cat 3116 six-cylinder engine.
Caterpillar later reused the 953B/953C/953D numbers for heavier, more powerful successors, and decades after this machine left production Caterpillar separately reused the bare '953' name for an unrelated current-generation Track Loader with a C7.1 engine; that later machine shares nothing with this one beyond the model number. Original 3204/hydrostatic 953 units are now well past factory support age, so most remaining machines are older forestry, landclearing, and landfill units still valued for their simple mechanical systems and relatively cheap parts. Parts demand centers on undercarriage wear items (sealed track, rollers, sprockets), hydrostatic pump and motor rebuild components, and 3204 engine parts shared with other Cat machines of the same era. Buyers looking at this generation trade modern emissions controls and electronics for low acquisition cost and straightforward field repair.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 953 specifications
Engine
| Engine model | Cat 3204, turbocharged inline 4-cylinder diesel |
| Net power | 82 kW (110 hp) |
| Displacement | 5.2 L (317.4 in³) |
| Emissions | Predates non-road emissions certification; no Tier/Stage rating applies |
Weights
| Operating weight, standard shoes | 14,098–14,102 kg (31,081–31,090 lb) |
| Operating weight, LGP shoes | 14,362 kg (31,663 lb) |
Dimensions
| Overall length, bucket on ground | 5.87–6.38 m (19.25–20.92 ft), varies by measurement basis across catalogs |
| Overall width over tracks | 2.18–2.31 m (7.16–7.58 ft) |
| Height to top of cab | 3.08–3.15 m (10.1–10.33 ft) |
| Ground clearance | 0.38 m (1.24 ft) |
| Track gauge | 1800 mm (70.87 in) |
| Track shoe width, standard | 380 mm (14.97 in) |
| Track shoe width, LGP | 500 mm (19.69 in) |
Performance
| Maximum travel speed | 10.5 km/h (6.5 mph) |
| Breakout force, standard bucket | 117.4 kN (26,395 lbf) |
| Static tipping load | 8,748 kg (19,288 lb) |
| Ground pressure, standard shoe | 78 kPa (11.35 psi) |
| Ground pressure, LGP shoe | 61 kPa (8.79 psi) |
| Hydraulic cycle times | Raise 7.4 sec, dump 1.5 sec, lower 3.0 sec |
Buckets and Blades
| Bucket capacity | 1.3 m³ struck (1.7 yd³) / 1.53 m³ heaped (2.0 yd³) |
Service Capacities
| Fuel tank | 192 L (50.8 gal) |
| Hydraulic system | 58.3 L (15.4 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
953 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | Not published in available spec sheets for this loader installation. The Cat 3204 engine's oil system generally runs about 9.5-12.5 L (10-13 qt) across its various installations; confirm the exact dipstick-full figure against your OMM for this serial range. | Cat diesel engine oil (Cat DEO-class, period API CD service rating). Use SAE 10W-30 for ambient -18C to 40C (0F to 104F); step down to SAE 0W-20/0W-30 in colder climates and up to SAE 30 or SAE 40 in sustained heat, per Cat's viscosity-by-ambient-temperature chart. |
| Cooling system | Total machine capacity not confirmed for this generation. The 3204 engine block alone holds roughly 12 L (3.2 gal); full system volume with radiator and lines runs higher and depends on the loader's cooling package. Verify against your OMM. | Cat heavy-duty coolant/antifreeze, full-strength ethylene-glycol type meeting Cat's coolant specification. Original-era fill was Cat DEAC; later service fills commonly use Cat ELC. |
| Fuel tank | 192 L (50.8 US gal). | No. 2-D diesel fuel meeting Cat's fuel specification for the 3204 engine. |
| Transmission / power train (hydrostatic drive) | Not published in available spec sheets for this generation; verify against your OMM or dealer. | This 953 drives on a hydrostatic system (variable-displacement pump/motor pairs to each track), not a powershift transmission with separate bevel-gear/steering-clutch compartments -- that split belongs to Cat's clutch-steer dozer line, not this loader. Cat specifies Transmission/Drive Train Oil (TDTO) for the hydrostatic power case, graded by ambient temperature -- roughly SAE 10W in cold climates up to SAE 30/50 in sustained heat, per Cat's TDTO viscosity chart. |
| Final drives (each side) | Not published in available spec sheets for this generation; verify against your OMM. | Cat TDTO, same ambient-temperature viscosity grading as the hydrostatic power case. |
| Hydraulic system / tank (implement circuit) | 58 L (15.4 US gal). | Cat TDTO-family fluid -- Cat's TDTO spec covers hydraulic compartments as well as drive and final-drive compartments on this era of machine. Grade by ambient temperature the same as the drive system. |
| Pivot shaft | Reported around 0.7 L (0.18 US gal) in secondary spec listings; not independently confirmed for this generation. Check the OMM lubrication chart for your serial range before filling. | Cat TDTO or equivalent drivetrain oil per the OMM lubrication chart. |
| Grease points (pins, linkages, bucket/loader-arm pivots) | Per-fitting service (purge old grease at each zerk); no bulk reservoir capacity applies. | Cat Multipurpose Grease (MPGM), NLGI No. 2, lithium-complex base. If unavailable, substitute a multipurpose grease containing 3-5% molybdenum disulfide. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 953 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the 953 beyond the schedule
Predictive maintenance & fluid analysis
Run scheduled oil sampling on the 3204 engine and the hydrostatic circuit instead of relying on hours alone. Rising iron or silicon in hydrostatic pump and motor case-drain oil flags early wear before a pump or motor seizes. Watch coolant condition for corrosion-inhibitor depletion, common on cooling systems this age. Fuel samples catch water and sediment before they reach the mechanical injection pump. Because this engine carries no ECM diagnostics, oil analysis and case-drain flow checks are the main early-warning tools available on this machine.
Corrective & common repairs
Repairs on this vintage 953 center on the hydrostatic drive: worn charge pumps, scored motor pistons, and shaft seals leaking from age-hardened rubber. Worn steering pedal linkage and control valve spools cause drift or sluggish counter-rotation and usually need bushing or spool replacement. On the 3204 side, expect injector and injection-pump wear, turbocharger shaft play, and valve lash drifting between scheduled adjustments. Undercarriage work focuses on sealed track pin and bushing wear and roller frame pivot bushings after decades of service life.
Overhaul & rebuild points
Major rebuild points on this machine are the hydrostatic pump and motor set, the 3204 in-frame (liners, rings, bearings), and the final drives. Check pump and motor flow and pressure against factory spec before committing to a full rebuild; declining case-drain flow is the usual trigger. Engine overhaul timing should follow oil-analysis and blow-by trends rather than a fixed hour figure on machines this old. Track roller frames and idlers typically need bushing and pin rebuilds once oscillation play exceeds factory tolerance.
Seasonal & environment servicing
Cold starts on the mechanically governed 3204 need correct-viscosity oil, a working starting aid, and a fully charged battery, since there is no electronic cold-start assist. Hydrostatic fluid thickens in cold weather too, so warm-up idle time before working the drive matters more than on a powershift machine. In hot, dusty, or abrasive ground conditions, shorten air filter, engine oil, and track lubrication intervals from the standard factory schedule to offset faster wear on the sealed track and hydrostatic seals.
953 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 6V-7615 | Film-Identification-On Fuel Filter | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
953 attachments & work tools
Blades
No dedicated bulldozer-style blade was cataloged for this crawler loader; grading, backfilling and light dozing were handled with the front bucket instead of a blade. General-purpose bucket capacity ran about 1.3 m3 struck / 1.5 m3 heaped (1.7 yd3 / 2.0 yd3), with a working width in the 2.3-2.4 m (90-95 in) range for this era of the series - width varies by bucket style and should be confirmed against the machine's plate rather than assumed.
Rippers
A rear-mounted, hitch-type multi-shank ripper (parallelogram linkage) was offered as an option for this loader class, with the beam able to carry up to three shank positions depending on ground conditions; single-shank rear rippers for light scarifying (frozen ground, thin asphalt, easily-ripped rock) were also common on loaders this size. The ripper ran off an added rear auxiliary hydraulic circuit rather than the base loader hydraulics. Exact factory shank counts and weights specific to this vintage aren't documented in available records - verify against the parts book for the serial range, and note the ripper also serves as extra rear counterweight and a de facto bumper when not in use.
Winches
A factory winch option is not documented for this crawler loader in available vintage records. Recovery/anchor winches were more typical on companion dozer models of similar power class from the same era, not this loader family. Treat any winch found fitted to an individual machine as a dealer or aftermarket addition and verify mounting and hydraulic/PTO compatibility through a dealer or parts book rather than assuming a factory arrangement.
Drawbars/counterweights
The engine sits over the rear of the machine, and its mass works as a running counterbalance against a loaded front bucket, a standard layout for loaders of this size and era. A rear ripper hitch, whether or not it is carrying shanks, adds further weight at the back end and can substitute for a dedicated counterweight. A bolt-on counterweight or pin-type drawbar specific to this exact vintage is not documented in available records - confirm with a dealer or parts book for the serial range before assuming fitment.
Cab/ROPS guarding
A pressurized, sound-suppressed ROPS/FOPS cab was offered for this class of loader. For forestry, brush-clearing, or debris-handling duty, dealers commonly fitted screen guarding over the cab glass, front grille/radiator screening, and underbody guarding to protect against branch strikes and flying debris - typical aftermarket or dealer-installed practice for loaders this size in that era. A named factory forestry package tied specifically to this exact vintage is not documented in available records - verify with a dealer for your serial range.
Hydraulic arrangement
Base hydraulics center on the hydrostatic drive circuit plus a separate implement circuit feeding the front loader lift/tilt cylinders; drive control on this generation runs through a hydrostatic control unit rather than the electronic hydrostatic control used on later, newer-engine versions of the series. Fitting a rear tool such as a ripper required adding an auxiliary control valve and routing hydraulic lines to the back of the machine, since the standard factory circuit is built around the front bucket only.
All 953 assemblies by section
Every catalogued assembly group for the Caterpillar 953. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
6n3062 Air Cleaner Group
| 6N***62 | Air Cleaner Group | 1 |
7n4155 Air Lines Group
| 7N***55 | Lines Group-Air | 1 |
6n6085 Exhaust Manifold Group
| 6N***85 | Manifold Group-Exhaust; Exhaust Manifold Group | 1 |
7p8940 Muffler Mounting Group
| 7P***40 | Mounting Group-Muffler | 1 |
6n7448 Muffler Group
| 6N***48 | Muffler Group | 1 |
Basic Engine
6n7209 Belt Tightener Group
| 6N***09 | Belt Tightener Group | 1 |
2w0331 Camshaft Group
| 2W***31 | Camshaft Group; Single Camshaft Group | 1 |
2w0854 Camshaft Group
| 2W***54 | Camshaft Group; Single Camshaft Group | 1 |
7n9550 Camshaft Group
| 7N***50 | Camshaft Group; Single Camshaft Group | 1 |
2w1337 Camshaft Group
| 2W***37 | Camshaft Group-Single; Single Camshaft Group | 1 |
6n2396 Valve Mechanism Cover Group
| 6N***96 | Cover Group-Valve Mechanism; Valve Mechanism Cover Group | 1 |
Crankshaft Bearing Replacements
| 1W***55 | Bearing (0.25mm Undersize) | 2 |
| 1W***56 | Bearing (0.51mm Undersize) | 2 |
| 1W***57 | Bearing (1.27mm Undersize) | 2 |
1w0402 Crankshaft Group
| 1W***02 | Crankshaft Group; Crankshaft Group | 1 |
6n8288 Crankshaft Group
| 6N***88 | Crankshaft Group; Crankshaft Group | 1 |
1w9768 Crankshaft Group
| 1W***68 | Crankshaft Group; Crankshaft Group | 1 |
7n4821 Cylinder Block Assembly
| 7N***21 | Cylinder Block As | 1 |
2w7902 Cylinder Block Assembly-Field Installation
| 2W***02 | Cylinder Block As | 1 |
8n9191 Short Block Group-Field Installation*R
| 1W***02 | Crankshaft Group; Crankshaft Group | 1 |
| 6N***49 | Cylinder Block Group; Cylinder Block Group | 1 |
| 8N***79 | Piston & Rod Group; Connecting Rod And Piston Group | 4 |
6n9049 Cylinder Block Group-Field Installation
| 6N***49 | Cylinder Block Group; Cylinder Block Group | 1 |
8n9190 Short Block Group-Field Installation*R
| 1W***02 | Crankshaft Group; Crankshaft Group | 1 |
| 6N***90 | Cylinder Block Group; Cylinder Block Group | 1 |
| 6N***88 | Crankshaft Group; Crankshaft Group | 1 |
2w2024 Short Block Group-Field Installation
| 1W***68 | Crankshaft Group; Crankshaft Group | 1 |
| 2W***40 | Piston & Rod Group; Connecting Rod And Piston Group | 4 |
| 2W***24 | Cylinder Block Group | 1 |
6n2390 Cylinder Block Group
| 6N***90 | Cylinder Block Group; Cylinder Block Group | 1 |
1w6221 Cylinder Head Group
| 2W***21 | Cylinder Head Group | 1 |
8n6113 Cylinder Head Group
| 8N***13 | Cylinder Head Group; Cylinder Head Group | 1 |
1w4241 Cylinder Head Group
| 1W***41 | Cylinder Head Group | 1 |
6n7210 Fan Drive Group
| 6N***10 | Drive Group-Fan | 1 |
6n7207 Water Pump Drive Group
| 6N***07 | Drive Group-Water Pump; Water Pump Drive Group | 1 |
4n8063 Flywheel Group
| 4N***63 | Flywheel Group; Flywheel Group | 1 |
4n6458 Flywheel Housing Group
| 4N***58 | Housing Group-Flywheel; Flywheel Housing Group | 1 |
2w1578 Front Housing Group
| 2W***78 | Housing Group-Front; Front Housing Group | 1 |
7n9956 Front Housing Group
| 7N***56 | Housing Group-Front; Front Housing Group | 1 |
2w2835 Front Housing Group
| 2W***35 | Housing Group-Front; Front Housing Group | 1 |
3w2572 Lift Eye Group
| 3W***72 | Lifting Group | 1 |
1w5554 Lifting Eye Group
| 1W***54 | Lifting Group | 1 |
4n0180 Lifting Eye Group
| 4N***80 | Lifting Group-Engine; Lifting Eye Group | 1 |
6n3068 Engine Mounting Group
| 6N***68 | Mounting Group-Engine | 1 |
6n3052 Oil Pan Group
| 6N***52 | Pan Group-Oil; Pan Gp-Engine Oil | 1 |
2w1040 Connecting Rod And Piston Group-4 Required
| 2W***40 | Piston & Rod Group; Connecting Rod And Piston Group | 1 |
8n4079 Connecting Rod And Piston Group-4 Required
| 8N***79 | Piston & Rod Group; Connecting Rod And Piston Group | 1 |
2w4841 Piston Group
| 2W***41 | Piston Group | 1 |
6n7205 Auxiliary Drive Pulley Group
| 6N***05 | Pulley Group-Auxiliary Drive; Auxiliary Drive Pulley Group | 1 |
6n7412 Fan Pulley Group
| 6N***12 | Pulley Group-Fan Drive | 1 |
4w8269 Piston Ring Group--1.02 Mm (.040 In.) Oversize
| 2W***17 | Ring-Piston; (Oil)(1.02-mm Os) | 1 |
| 4W***68 | Ring-Piston; (Top) | 1 |
| 4W***69 | Ring Group-Piston | 1 |
4w8261 Piston Ring Group--.51 Mm (.020 In.) Oversize
| 2W***16 | Ring-Piston; (Oil)(0.51-mm Os) | 1 |
| 4W***60 | Ring--Top | 1 |
| 4W***61 | Ring Group-Piston | 1 |
7n0946 Engine Support Group
| 7N***46 | Support Group-Engine; Engine Support Group | 1 |
6n2398 Valve Mechanism Group
| 6N***98 | Valve-Mechanism Group; Valve Mechanism Group | 1 |
Cab, Gauges And Accessories
4v7849 Suspension Seat Adjuster Group-Type 2
| 4V***49 | Adjuster Group-Seat | 1 |
4v7849 Suspension Seat Adjuster Group-Type 1
| 4V***49 | Adjuster Group-Seat | 1 |
4v8599 Seat Adjuster Group
| 4V***99 | Adjuster Group-Seat | 1 |
8g0959 Air Conditioner Arrangement-Heats And Cools
| 5P***13 | Refrigerant (19 Hg) | 0 |
| 6N***65 | Compressor Group-Refrigerant; Compressor Group--Refrigerant | 1 |
| 6N***23 | Alternator Group-Charging | 1 |
7p1084 Air Conditioner Group-Type 2
| 7P***84 | Air Conditioner Group; Air Conditioner Group | 1 |
7p1084 Air Conditioner Group-Type 1
| 7P***84 | Air Conditioner Group; Air Conditioner Group | 1 |
3w1023 Cab Arrangement-Feller Buncher
| 3W***23 | Cab Ar | 1 |
| 3W***03 | Rops Group; Roll-Over Protective System Group- | 1 |
| 3W***04 | Cover Group; Covers Group-Feller Buncher | 1 |
7n4296 Clutch And Refrigerant Compressor Group*R
| 7N***96 | Compressor Group-Clutch & Refrig | 1 |
6n6765 Refrigerant Compressor Group-Type 2
| 6N***65 | Compressor Group-Refrigerant; Compressor Group--Refrigerant | 1 |
6n6765 Refrigerant Compressor Group-Type 1
| 6N***65 | Compressor Group-Refrigerant; Compressor Group--Refrigerant | 1 |
9g9310 Mounting And Condenser Group
| 9G***10 | Condenser & Mounting Group; Mounting And Condenser Group | 1 |
9p9791 Condenser Group-Type 1
| 9P***91 | Condenser Group | 1 |
9p9791 Condenser Group-Type 2
| 9P***91 | Condenser Group | 1 |
9p9791 Condenser Group-Type 3
| 9P***91 | Condenser Group | 1 |
3w1304 Covers Group-Feller Buncher
| 3W***04 | Cover Group; Covers Group-Feller Buncher | 1 |
5v4884 Seat Cover Group-Type 1
| 5V***84 | Cover Group-Seat | 1 |
5v4884 Seat Cover Group-Type 2
| 5V***84 | Cover Group-Seat | 1 |
4v9830 Seat Cover Group-Suspension-Type 2
| 4V***30 | Cover Group-Seat | 1 |
4v9830 Seat Cover Group-Suspension-Type 1
| 4V***30 | Cover Group-Seat | 1 |
7p1040 Dash Group
| 7P***40 | Dash Group | 1 |
3w1307 Door Group-L.H.-Feller Buncher
| 3W***07 | Door Group | 1 |
3w1306 Door Group-R.H.-Feller Buncher
| 3W***06 | Door Group | 1 |
8g0479 Door Group-L.H.-Type 1
| 8G***79 | Door Group-Lh | 1 |
8g0479 Door Group-L.H.-Type 2
| 8G***79 | Door Group-Lh | 1 |
8g0478 Door Group-R.H.-Type 1
| 8G***78 | Door Group-Rh | 1 |
8g0478 Door Group-R.H.-Type 2
| 8G***78 | Door Group-Rh | 1 |
8g0150 Warning Gauge Group-Type 1
| 8G***50 | Gauge Group | 1 |
8g0150 Warning Gauge Group-Type 2
| 8G***50 | Gauge Group | 1 |
8g4418 Vandalism Guard Group
| 8G***18 | Guard Group-Vandalism; Vandalism Guard Group--Dash | 1 |
7p1090 Vandalism Guard Group
| 7P***90 | Guard Group-Vandalism; Vandalism Guard Group--Dash | 1 |
3w0916 Vandalism Guard Group
| 3W***16 | Guard Group-Vandalism; Vandalism Guard Group -- Dash | 1 |
8g7208 Harness Assembly
| 8G***08 | Harness As | 1 |
7p8424 Harness Assembly
| 7P***24 | Harness As-Cab | 1 |
8g0960 Cab Heater Arrangement
| 1V***19 | Plug- Button; Plug--Button | 1 |
| 3J***90 | Plug Adapter Turbo Oil Supply; Plug-Adapter Turbo Oil Supply | 1 |
| 7P***91 | Heater Group-Cab; Heater Group--Cab | 1 |
3w1224 Open Rops Heater Arrangement
| 3W***80 | Heater Group; Heater Group---------------------------- | 1 |
| 3W***82 | Lines Group-Heater; Heater Lines Group---------------------- | 1 |
| 3W***84 | Wiring Group-Pressurizer; Pressurizer Wiring Group---------------- | 1 |
3w0680 Heater Group-Open Rops
| 3W***80 | Heater Group; Heater Group---------------------------- | 1 |
7p1091 Cab Heater Group
| 7P***91 | Heater Group-Cab; Heater Group--Cab | 1 |
7p1086 Air Conditioner Lines Group
| 7P***86 | Lines Group-Air Conditioner; Air Conditioner Lines Group | 1 |
7p7980 Air Conditioner Lines Group
| 7P***80 | Lines Group-Air Conditioner | 1 |
7p5056 Cab Heater Lines Group-Type 1
| 7P***56 | Lines Group-Heater; Cab Heater Lines Group | 1 |
3w0682 Heater Lines Group-Open Rops
| 3W***82 | Lines Group-Heater; Heater Lines Group---------------------- | 1 |
7p5056 Cab Heater Lines Group-Type 2
| 7P***56 | Lines Group-Heater; Cab Heater Lines Group | 1 |
7p6937 Rear View Mirror Group
| 7P***37 | Mirror Group-Rear View; Rear View Mirror Group | 1 |
3w1258 Mounting & Pressurizer Group-Open Rops
| 3W***58 | Mounting & Pressurizer Group; Mounting & Pressurizer Group------------ | 1 |
7p1103 Cab Pressurizer Group-Part 2
| 7P***03 | Pressurizer Group; Cab Pressurizer Group | 1 |
7p1103 Cab Pressurizer Group-Part 1
| 7P***03 | Pressurizer Group; Cab Pressurizer Group | 1 |
8g1010 Roll-Over Protective System Arrangement
| 7P***37 | Mirror Group-Rear View; Rear View Mirror Group | 1 |
| 7P***13 | Rops Group | 1 |
| 8G***10 | Rops Ar; Roll-Over Protective System Arrangement. | 1 |
8g0936 Roll-Over Protective System Arrangement
| 7P***37 | Mirror Group-Rear View; Rear View Mirror Group | 1 |
| 7P***13 | Rops Group | 1 |
| 7P***17 | Guard Group-Lines; Tilt Lines Guard Group | 1 |
3w1303 Rollover Protective System Group-Feller Buncher
| 3W***03 | Rops Group; Roll-Over Protective System Group- | 1 |
| 3W***05 | Rops Group; Roll-Over Protective System Group- | 1 |
| 7P***37 | Mirror Group-Rear View; Rear View Mirror Group | 1 |
7p1108 Roll-Over Protective System Group-Part 1
| 7P***08 | Rops Group | 1 |
3w1305 Rollover Protective System Group-Part 2 Of 2-Feller Buncher
| 3W***05 | Rops Group; Roll-Over Protective System Group- | 1 |
7p7013 Roll-Over Protective System Group
| 7P***13 | Rops Group | 1 |
3w1305 Rollover Protective System Group-Part 1 Of 2-Feller Buncher
| 3W***05 | Rops Group; Roll-Over Protective System Group- | 1 |
7p1108 Roll-Over Protective System Group-Part 2
| 7P***08 | Rops Group | 1 |
7p5720 Seat Group
| 7P***20 | Seat Group | 1 |
7p5719 Seat Group
| 7P***19 | Seat Group-Adjustable | 1 |
3v8252 Suspension Seat Group
| 3V***52 | Seat Group-Suspension; Suspension Seat Group | 1 |
7p5721 Suspension Seat Group-Type 1
| 7P***21 | Seat Group-Suspension | 1 |
7p5721 Suspension Seat Group-Type 2
| 7P***21 | Seat Group-Suspension | 1 |
8g0840 Suspension Seat Group
| 8G***40 | Seat Group-Suspension | 1 |
8g1205 Cover Group-Rops-Type 1
| 8G***05 | Step & Cover Group; Roll-Over Protective Structure Covers | 1 |
8g1205 Cover Group-Rops-Type 2
| 8G***05 | Step & Cover Group; Roll-Over Protective Structure Covers | 1 |
5v4861 Seat Suspension Group-Part 1-Type 1
| 5V***61 | Suspension Group-Seat | 1 |
5v4861 Seat Suspension Group-Part 1-Type 2
| 5V***61 | Suspension Group-Seat | 1 |
5v4861 Seat Suspension Group-Part 1 Of 2-Type 3
| 5V***61 | Suspension Group-Seat | 1 |
5v4861 Seat Suspension Group-Part 2-Type 1
| 5V***61 | Suspension Group-Seat | 1 |
5v4861 Seat Suspension Group-Part 2 Of 2-Type 3
| 5V***61 | Suspension Group-Seat | 1 |
5v4861 Seat Suspension Group-Part 2-Type 2
| 5V***61 | Suspension Group-Seat | 1 |
7p2782 Windshield Washer Tank Group
| 7P***82 | Tank Group-Windshield Washer | 1 |
8g1626 Windshield Washer Tank Group
| 8G***26 | Tank Group-Windshield Washer; Windshield Washer Tank Group | 1 |
3w1041 Tank Gp-Windshield Washer
| 3W***41 | Tank Group-Windshield Washer | 1 |
3w0914 Vandalism Arrangement-Open Rops-Single Lever
| 3W***40 | Pin | 1 |
| 3W***12 | Covers Group-Radiator Protection; Radiator Protection Covers Group | 1 |
| 3W***14 | Vandalism Ar | 1 |
3w0913 Vandalism Arrangement-Open Rops
| 3W***36 | Pin Assembly | 1 |
| 3W***12 | Covers Group-Radiator Protection; Radiator Protection Covers Group | 1 |
| 3W***13 | Vandalism Ar | 1 |
8g0963 Vandalism Arrangement-Open Rops-Replaced By 3w915-Page 225a
| 1P***78 | Cap Group-Protection; Protection Cover Group Fuel Tank Cap | 1 |
| 7P***87 | Cover Group-Radiator Protection; Protection Covers Group--Radiator | 1 |
| 7P***90 | Guard Group-Vandalism; Vandalism Guard Group--Dash | 1 |
3w0915 Vandalism Arrangement-Enclosed Rops
| 3W***12 | Covers Group-Radiator Protection; Radiator Protection Covers Group | 1 |
| 3W***15 | Vandalism Ar | 1 |
| 5G***12 | Cap Group-Protection; Fuel Filler Protection Cap Group | 1 |
8g0962 Vandalism Arrangement-Enclosed Rops-Replaced By 3w915-Page 225a
| 1P***78 | Cap Group-Protection; Protection Cover Group Fuel Tank Cap | 1 |
| 7P***87 | Cover Group-Radiator Protection; Protection Covers Group--Radiator | 1 |
| 8G***62 | Vandalism Ar | 1 |
8g0892 Vandalism Arrangement-Open Rops-Single Lever-Replaced By 3w914-
| 1P***78 | Cap Group-Protection; Protection Cover Group Fuel Tank Cap | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
| 5P***02 | Padlock Group; (Includes: Battery Compartments, Platform Compartments, Radiator Access Door, Firewall Doors) | 1 |
8g2971 Windshield Washer Group
| 8G***71 | Washer Group-Windshield; Windshield Washer Group | 1 |
7p1119 Windshield Washer Group
| 7P***19 | Washer Group-Windshield | 1 |
6t7300 Wiper Group
| 6T***00 | Wiper Group | 1 |
7p9146 Rear Wiper Group-Type 2
| 7P***46 | Wiper Group-Rear; Rear Wiper Group | 1 |
7p9146 Rear Wiper Group-Type 1
| 7P***46 | Wiper Group-Rear; Rear Wiper Group | 1 |
7p1118 Windshield Wiper Group-Type 2
| 7P***18 | Wiper Group-Windshield; Windshield Wiper Group | 1 |
7p1118 Windshield Wiper Group-Type 1
| 7P***18 | Wiper Group-Windshield; Windshield Wiper Group | 1 |
7p1085 Air Conditioner Wiring Group-Type 2
| 7P***85 | Wiring Group-Air Conditioner; Wiring Group--Air Conditioner | 1 |
7p1085 Air Conditioner Wiring Group-Type 1
| 7P***85 | Wiring Group-Air Conditioner; Wiring Group--Air Conditioner | 1 |
7p5055 Pressurizer Wiring Group
| 7P***55 | Wiring Group-Pressurizer; Pressurizer Wiring Group | 1 |
3w0684 Pressurizer Wiring Group-Open Rops
| 3W***84 | Wiring Group-Pressurizer; Pressurizer Wiring Group---------------- | 1 |
Chassis And Undercarriage
7p8939 Equalizer Bar Group
| 7P***39 | Bar Group-Equalizer | 1 |
7p8914 Pivot Bar Group
| 7P***14 | Bar Group-Pivot | 1 |
8g0148 Safety Brace Group
| 8G***48 | Brace Group | 1 |
8g4051 Rear Bumper Group
| 8G***51 | Bumper Group-Rear | 1 |
8g1701 Non-Rops Conversion Arrangement
| 8G***11 | Guard Group-Lines; Tilt Lines Guard Group | 1 |
| 8G***05 | Step & Cover Group; Roll-Over Protective Structure Covers | 1 |
| 8G***01 | Conversion Ar-Non-Rops; Non-Rops Conversion Arrangement | 1 |
8g0920 Non-Rops Conversion Arrangement
| 7P***17 | Guard Group-Lines; Tilt Lines Guard Group | 1 |
| 8G***20 | Conversion Ar-Non-Rops | 1 |
| 8G***11 | Guard Group-Lines; Tilt Lines Guard Group | 1 |
7p8935 Engine Enclosure Group-Part 4 Of 4
| 7P***35 | Enclosure Group-Engine | 1 |
7p8935 Enclosure Gp-Engine-Part 3 Of 4
| 7P***35 | Enclosure Group-Engine | 1 |
7p8935 Engine Enclosure Group-Part 2 Of 4
| 7P***35 | Enclosure Group-Engine | 1 |
7p8935 Engine Enclosure Group-Part 1 Of 4
| 7P***35 | Enclosure Group-Engine | 1 |
7p8935 Enclosure Gp-Engine-Part 4 Of 4
| 7P***35 | Enclosure Group-Engine | 1 |
7p8935 Engine Enclosure Group-Part 3 Of 4
| 7P***35 | Enclosure Group-Engine | 1 |
7p8935 Enclosure Gp-Engine-Part 2 Of 4
| 7P***35 | Enclosure Group-Engine | 1 |
7p8935 Enclosure Gp-Engine-Part 1 Of 4
| 7P***35 | Enclosure Group-Engine | 1 |
7p9900 Loader Frame Group
| 7P***00 | Frame Group-Loader | 1 |
8g5445 Track Roller Frame Group
| 8G***45 | Frame Group-Track Roller | 1 |
7p8916 Track Roller Frame Group
| 7P***16 | Frame Group-Track Roller | 1 |
7p6512 Bottom Guard Group
| 7P***12 | Guard Group-Bottom | 1 |
7p6615 Front Guard Group
| 7P***15 | Guard Group-Front | 1 |
3w2622 Idler Guard Group
| 3W***22 | Guard Group-Idler | 1 |
7p6170 Implement Control Guard Group
| 7P***70 | Guard Group-Implement Control; Implement Control Guard Group | 1 |
7p9217 Tilt Lines Guard Group
| 7P***17 | Guard Group-Lines; Tilt Lines Guard Group | 1 |
8g1011 Tilt Lines Guard Group
| 8G***11 | Guard Group-Lines; Tilt Lines Guard Group | 1 |
7p8907 Radiator Guard Group
| 7P***07 | Guard Group-Radiator | 1 |
7p1049 Track Guide Guard Group
| 7P***49 | Guard Group-Track Guide | 1 |
7p3522 Track Roller Guard Group-Type 2
| 7P***22 | Guard Group-Track Roller | 1 |
7p3522 Track Roller Guard Group-Type 1
| 7P***22 | Guard Group-Track Roller | 1 |
8g3811 Hitch Group
| 8G***11 | Hitch Group | 1 |
7p8917 Front Idler Group-Part 2 Of 2
| 7P***17 | Idler Group-Front | 1 |
7p8917 Front Idler Group-Part 1 Of 2
| 7P***17 | Idler Group-Front | 1 |
7p6133 Roll-Over Protective Structure Mounting Group
| 7P***33 | Mounting Group-Rops | 1 |
7p6614 Tilt Platform Group
| 7P***14 | Platform Group-Tilt | 1 |
8g2722 Tilt Platform Group-Part 2
| 8G***22 | Platform Group-Tilt | 1 |
8g2722 Tilt Platform Group-Part 1
| 8G***22 | Platform Group-Tilt | 1 |
6k9880 Track Carrier Roller Group-2 Required
| 6K***80 | Roller Group-Track Carrier; (Upper) | 1 |
9p4211 Track Roller Group-Double Flange-4 Required
| 9P***11 | Roller Group-Track Double Flange; Track Roller Group-Double Flange | 1 |
9p4208 Track Roller Group-Single Flange-8 Required
| 9P***08 | Roller Group-Track Single Flange; Track Roller Group-Single Flange | 1 |
6t3578 Seal And Bushing Group
| 1V***68 | Seal Assembly | 70 |
| 1V***94 | Bushing-Track; Bushing Track | 35 |
| 6T***78 | Seal & Bushing Group | 1 |
7p8909 Step Group
| 7P***09 | Step Group | 1 |
7p6906 Tilt Platform Support Group
| 7P***06 | Support Group-Tilt Platform | 1 |
7p8908 Platform Tilt Group
| 7P***08 | Tilt Group-Platform | 1 |
3y7648 Track Group-460 Mm (18 In.) Triple Grouser Shoe-Sealed And
| 3Y***48 | Track Group | 1 |
3t2183 Track Group-460 Mm (18 In.) Double Grouser Shoe-Sealed And
| 3T***83 | Track Group | 1 |
Cooling System
8g4097 Implement Cooler Conversion Arrangement
| 3G***26 | Conversion Group-Field; Cooler Supply Field Conversion Group | 1 |
| 7N***44 | Cooler Group-Hydraulic Oil; Hydraulic Oil Cooler Group | 1 |
| 8G***95 | Lines Group-Hydraulic Oil Cooler; Hydraulic Oil Cooler Lines Group | 1 |
8g0147 Implement Cooler Conversion Arrangement-Field Installation
| 3G***26 | Conversion Group-Field; Cooler Supply Field Conversion Group | 1 |
| 7N***44 | Cooler Group-Hydraulic Oil; Hydraulic Oil Cooler Group | 1 |
| 7P***34 | Lines Group-Hydraulic Oil Cooler; Hydraulic Oil Cooler Lines Group | 1 |
9n5659 Engine Oil Cooler Group
| 9N***59 | Cooler Group-Engine Oil | 1 |
6n9052 Engine Oil Cooler Group
| 6N***52 | Cooler Group-Engine Oil; Engine Oil Cooler Group | 1 |
1w1138 Engine Oil Cooler Group
| 1W***38 | Cooler Group-Engine Oil; Engine Oil Cooler Group | 1 |
7n9744 Hydraulic Oil Cooler Group
| 7N***44 | Cooler Group-Hydraulic Oil; Hydraulic Oil Cooler Group | 1 |
2w1879 Hydraulic Oil Cooler Group
| 2W***79 | Cooler Group-Hydraulic Oil; Hydraulic Oil Cooler Lines Group | 1 |
8n0482 Transmission Oil Cooler Group
| 8N***82 | Cooler Group-Transmission Oil | 1 |
3w0912 Protection Cover Gp-Radiator
| 3W***12 | Covers Group-Radiator Protection; Radiator Protection Covers Group | 1 |
6n4852 Blower Fan Group
| 6N***52 | Fan Group-Blower | 1 |
6n9125 Heater Gp-Jacket Water (750 Watt, 120 Volt)
| 6N***25 | Heater Group-Jacket Water | 1 |
6n9739 Heater Gp-Jacket Water (750 Watt, 120 Volt)
| 6N***39 | Heater Group-Jacket Water; Jacket Water Heater Group | 1 |
8g4095 Hydraulic Oil Cooler Lines Group-Type 2
| 8G***95 | Lines Group-Hydraulic Oil Cooler; Hydraulic Oil Cooler Lines Group | 1 |
8g4095 Hydraulic Oil Cooler Lines Group-Type 1
| 8G***95 | Lines Group-Hydraulic Oil Cooler; Hydraulic Oil Cooler Lines Group | 1 |
7p9834 Hydraulic Oil Cooler Lines Group-Replaced By 8g4095 Shown On Page
| 7P***34 | Lines Group-Hydraulic Oil Cooler; Hydraulic Oil Cooler Lines Group | 1 |
4n0188 Water Lines Group
| 4N***88 | Lines Group-Water; Water Lines Group | 1 |
6n7450 Radiator And Transmission Cooler Mounting Group
| 6N***50 | Mounting Group-Rad & Tmsn Cooler | 1 |
4n0660 Water Pump Group
| 4N***60 | Pump Group-Water; Water Pump Group | 1 |
6n2742 Radiator Group
| 6N***42 | Radiator Group | 1 |
Engine Arrangement
4n8376 Engine Arrangement-Part 2 Of 2
| 1W***35 | Lines Group-Fuel Injection; Fuel Injection Lines Group | 1 |
| 1W***38 | Cooler Group-Engine Oil; Engine Oil Cooler Group | 1 |
| 2W***33 | Pump Group-Engine Oil; Engine Oil Pump Group | 1 |
4n8376 Engine Arrangement-Part 1 Of 2
| 1W***02 | Crankshaft Group; Crankshaft Group | 1 |
| 1W***54 | Lifting Group | 1 |
| 1W***68 | Crankshaft Group; Crankshaft Group | 1 |
Fuel System And Governor
1p8678 Protection Cap Group-Fuel Tank
| 1P***78 | Cap Group-Protection; Protection Cover Group Fuel Tank Cap | 1 |
5g3612 Protection Cap Group-Fuel Tank
| 5G***12 | Cap Group-Protection; Fuel Filler Protection Cap Group | 1 |
8n9751 Fuel Heater Changeover Group-Field Installation
| 8N***51 | Changeover Group; Aftercooler Group--Water | 1 |
8g0140 Governor Control Group-Part 2
| 8G***40 | Control Group-Governor | 1 |
8g0140 Governor Control Group-Part 1
| 8G***40 | Control Group-Governor | 1 |
8n6158 Governor Cover Group
| 8N***58 | Cover Group-Governor | 1 |
8n3493 Accessory Drive Group
| 8N***93 | Drive Group-Accessory; Accessory Drive Group | 1 |
8n4251 Fuel Filter Group
| 8N***51 | Filter Group-Fuel; Fuel Filter Group | 1 |
6n1044 Primary Fuel Filter Group
| 6N***44 | Filter Group-Primary Fuel; Primary Fuel Filter Group | 1 |
8n4419 Governor Group-Part 2 Of 2-Type 2
| 8N***19 | Governor Group | 1 |
8n4419 Governor Group-Part 2 Of 2-Type 1
| 8N***19 | Governor Group | 1 |
8n4419 Governor Group-Part 1 Of 2-Type 2
| 8N***19 | Governor Group | 1 |
8n4419 Governor Group-Part 1 Of 2-Type 1
| 8N***19 | Governor Group | 1 |
7p9208 Fuel Lines Group
| 7P***08 | Lines Group-Fuel | 1 |
8g4124 Fuel Lines Group
| 8G***24 | Lines Group-Fuel | 1 |
1w1135 Fuel Injection Lines Group
| 1W***35 | Lines Group-Fuel Injection; Fuel Injection Lines Group | 1 |
7n6345 Fuel Injection Lines Group
| 7N***45 | Lines Group-Fuel Injection; Fuel Injection Lines Group | 1 |
8n4915 Fuel Transfer Pump And Mounting Group
| 8N***15 | Pump & Mounting Group; Fuel Transfer Pump And Mounting Group | 1 |
7n6933 Fuel Injection Pump Group-Type 2
| 7N***33 | Pump Group-Fuel Injection | 1 |
7n6933 Fuel Injection Pump Group-Type 1
| 7N***33 | Pump Group-Fuel Injection | 1 |
8n3567 Fuel Priming Pump Group
| 8N***67 | Pump Group-Fuel Priming; Fuel Priming Pump Group | 1 |
4n6117 Governor And Fuel Injection Pump Group
| 4N***17 | Pump Group-Gov & Fuel Inj; Governor And Fuel Injection Pump Group | 1 |
7p6510 Fuel Tank Group
| 7P***10 | Tank Group-Fuel | 1 |
8n8758 Torque Control Group
| 8N***58 | Torque Control Group | 1 |
Hydraulic System
1u2296 Cartridge Group-Replaced By 9t1697-Page 181c
| 1U***96 | Cartridge Group | 1 |
9t1697 Front Cartridge Group*R
| 9T***97 | Cartridge Group-Front | 1 |
1u3519 Cartridge Group-Clockwise*R
| 1U***19 | Cartridge Group-Vane Pump | 1 |
7p1034 Bucket Control Group
| 7P***34 | Control Group-Bucket | 1 |
8g5318 Bucket Control Group
| 8G***18 | Control Group-Bucket | 1 |
7p1100 Diverter Control Group-Type 2
| 7P***00 | Control Group-Diverter; Diverter Control Group | 1 |
7p1100 Diverter Control Group-Type 1
| 7P***00 | Control Group-Diverter; Diverter Control Group | 1 |
7p1100 Diverter Control Group-Type 3
| 7P***00 | Control Group-Diverter; Diverter Control Group | 1 |
7p2908 Hydraulic Hand Control Group
| 7P***08 | Control Group-Hydraulic Hand; Hydraulic Hand Control Group | 1 |
7p6909 Mechanical Hydraulic Control Group-Part 2 Of 3-Type 3
| 7P***09 | Control Group-Mechanical Hydraulic | 1 |
7p6909 Mechanical Hydraulic Control Group-Part 1 Of 3-Type 1
| 7P***09 | Control Group-Mechanical Hydraulic | 1 |
7p6909 Mechanical Hydraulic Control Group-Part 3 Of 3-Type 2
| 7P***09 | Control Group-Mechanical Hydraulic | 1 |
7p6909 Mechanical Hydraulic Control Group-Part 2 Of 3-Type 1
| 7P***09 | Control Group-Mechanical Hydraulic | 1 |
7p6909 Mechanical Hydraulic Control Group-Part 3 Of 3-Type 3
| 7P***09 | Control Group-Mechanical Hydraulic | 1 |
7p6909 Mechanical Hydraulic Control Group-Part 1 Of 3-Type 4
| 7P***09 | Control Group-Mechanical Hydraulic | 1 |
7p6909 Mechanical Hydraulic Control Group-Part 3 Of 3-Type 1
| 7P***09 | Control Group-Mechanical Hydraulic | 1 |
7p6909 Mechanical Hydraulic Control Group-Part 2 Of 3-Type 4
| 7P***09 | Control Group-Mechanical Hydraulic | 1 |
7p6909 Mechanical Hydraulic Control Group-Part 3 Of 3-Type 4
| 7P***09 | Control Group-Mechanical Hydraulic | 1 |
7p6909 Mechanical Hydraulic Control Group-Part 1 Of 3-Type 3
| 7P***09 | Control Group-Mechanical Hydraulic | 1 |
7p6909 Mechanical Hydraulic Control Group-Part 2 Of 3-Type 2
| 7P***09 | Control Group-Mechanical Hydraulic | 1 |
7p6607 Mechanical Hydraulic Control Group-Part 1
| 7P***07 | Control Group-Mechanical Hydraulic; Mechanical Hydraulic Control Group | 1 |
7p6909 Mechanical Hydraulic Control Group-Part 1 Of 3-Type 2
| 7P***09 | Control Group-Mechanical Hydraulic | 1 |
7p6607 Mechanical Hydraulic Control Group-Part 2
| 7P***07 | Control Group-Mechanical Hydraulic; Mechanical Hydraulic Control Group | 1 |
3g8626 Hydraulic Cooler Supply Conversion Group-Field Installation
| 3G***26 | Conversion Group-Field; Cooler Supply Field Conversion Group | 1 |
8g2533 Hydraulic Oil Cooler Arrangement
| 7N***44 | Cooler Group-Hydraulic Oil; Hydraulic Oil Cooler Group | 1 |
| 7P***34 | Lines Group-Hydraulic Oil Cooler; Hydraulic Oil Cooler Lines Group | 1 |
| 8G***33 | Cooler Ar-Hydraulic Oil; Hydraulic Oil Cooler Arrangement | 1 |
8g2534 Hydraulic Oil Cooler Arrangement
| 2W***79 | Cooler Group-Hydraulic Oil; Hydraulic Oil Cooler Lines Group | 1 |
| 3G***42 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
| 7N***44 | Cooler Group-Hydraulic Oil; Hydraulic Oil Cooler Group | 1 |
9v8168 Seal & Cylinder Group
| 9V***68 | Cylinder & Seal Group | 1 |
4t1963 Lift Cylinder Group-(Change 0)-101.6 Mm (4.7 In.) Bore X 742 Mm
| 4T***63 | Cylinder Group | 1 |
3g1296 Ripper Cylinder Group (Changes 1-3)-101.6 Mm (4.7 In.) Bore X
| 3G***96 | Cylinder Group | 1 |
3g4653 Tilt Cylinder Group (Change 1) 121 Mm (4.7 In.) Bore X 493.0 Mm
| 3G***53 | Cylinder Group | 1 |
4t9387 Cylinder Group
| 4T***87 | Cylinder Group; -Multipurpose | 1 |
9j4892 Bucket Cylinder Group (2v9862 N/S)-(Change 2)-101.6 Mm (4.7 In.)
| 9J***92 | Cylinder Group-Bucket; Seal And Cylinder Gp | 1 |
9j0532 Lift Cylinder Group (Change 6)
| 9J***32 | Cylinder Group-Lift | 1 |
1u4802 Tilt Cylinder Group (Change 0)-121 Mm (4.75 In.) Bore X 493 Mm
| 1U***02 | Cylinder Group-Tilt | 1 |
8g0155 Hydraulic Arrangement-3 Valve-Front
| 7P***94 | Lines Group-Attachment; Attachment Lines Group | 1 |
| 7P***95 | Lines Group-Front; Front Attachment Lines Group | 1 |
| 7P***08 | Control Group-Hydraulic Hand; Hydraulic Hand Control Group | 1 |
8g4262 Hydraulic Arrangement-3 Valve-Front And Rear
| 2W***79 | Cooler Group-Hydraulic Oil; Hydraulic Oil Cooler Lines Group | 1 |
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
| 7N***44 | Cooler Group-Hydraulic Oil; Hydraulic Oil Cooler Group | 1 |
8g0156 Hydraulic Arrangement-3 Valve-Rear
| 7P***94 | Lines Group-Attachment; Attachment Lines Group | 1 |
| 7P***98 | Lines Group-Rear Attachment; Rear Attachment Lines Group | 1 |
| 7P***08 | Control Group-Hydraulic Hand; Hydraulic Hand Control Group | 1 |
8g0157 Hydraulic Arrangement-3 Valve-Front And Rear
| 7P***94 | Lines Group-Attachment; Attachment Lines Group | 1 |
| 7P***95 | Lines Group-Front; Front Attachment Lines Group | 1 |
| 7P***98 | Lines Group-Rear Attachment; Rear Attachment Lines Group | 1 |
8g0153 Hydraulic Arrangement-3 Valve-Rear
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
| 7P***94 | Lines Group-Attachment; Attachment Lines Group | 1 |
| 7P***98 | Lines Group-Rear Attachment; Rear Attachment Lines Group | 1 |
8g0154 Hydraulic Arrangement-3 Valve-Front And Rear
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
| 7P***94 | Lines Group-Attachment; Attachment Lines Group | 1 |
| 7P***95 | Lines Group-Front; Front Attachment Lines Group | 1 |
8g3988 Hydraulic Arrangement-Special
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 5P***43 | Bolt 2.86 cm (1.125 In.) Long | 4 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 4 |
8g0152 Hydraulic Arrangement-3 Valve-Front
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
| 7P***94 | Lines Group-Attachment; Attachment Lines Group | 1 |
| 7P***95 | Lines Group-Front; Front Attachment Lines Group | 1 |
8g4260 Hydraulic Arrangement-3 Valve-Front
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
| 7N***44 | Cooler Group-Hydraulic Oil; Hydraulic Oil Cooler Group | 1 |
| 7P***94 | Lines Group-Attachment; Attachment Lines Group | 1 |
8g4261 Hydraulic Arrangement-3 Valve-Rear
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
| 7N***44 | Cooler Group-Hydraulic Oil; Hydraulic Oil Cooler Group | 1 |
| 7P***94 | Lines Group-Attachment; Attachment Lines Group | 1 |
7p6608 Positioner And Kickout Group-Part 1 Of 2
| 7P***08 | Kickout & Positioner Group | 1 |
7p6608 Positioner And Kicout Group-Part 2
| 7P***08 | Kickout & Positioner Group | 1 |
7p6608 Positioner And Kickout Group-Part 1
| 7P***08 | Kickout & Positioner Group | 1 |
7p6608 Positioner And Kickout Group-Part 2
| 7P***08 | Kickout & Positioner Group | 1 |
7p1094 Attachment Lines Group
| 7P***94 | Lines Group-Attachment; Attachment Lines Group | 1 |
8v7362 Bucket Lines Group-Replaced By 9v8414-Page 172b-1
| 8V***62 | Lines Group-Bucket; Bucket Lines Group | 1 |
9v8414 Bucket Lines Group
| 9V***14 | Lines Group-Bucket; Bucket Lines Group | 1 |
7p1095 Front Attachment Lines Group-Part 2
| 7P***95 | Lines Group-Front; Front Attachment Lines Group | 1 |
8g3517 Front Lines Group-Part 1 Of 2-Type 1
| 8G***17 | Lines Group-Front; Front Attachment Lines Group | 1 |
7p1095 Front Attachment Lines Group-Part 1
| 7P***95 | Lines Group-Front; Front Attachment Lines Group | 1 |
8g3517 Front Lines Group-Part 2 Of 2-Type 2
| 8G***17 | Lines Group-Front; Front Attachment Lines Group | 1 |
8g3517 Front Lines Group-Part 1 Of 2-Type 2
| 8G***17 | Lines Group-Front; Front Attachment Lines Group | 1 |
8g3517 Front Lines Group-Part 2 Of 2-Type 1
| 8G***17 | Lines Group-Front; Front Attachment Lines Group | 1 |
7p1072 Lift Cylinder Lines Group-Part 1
| 7P***72 | Lines Group-Lift Cylinder | 1 |
7p1072 Lift Cylinder Lines Group-Part 2
| 7P***72 | Lines Group-Lift Cylinder | 1 |
8g5323 Lift Cylinder Lines Group-Part 2 Of 2
| 8G***23 | Lines Group-Lift Cylinder | 1 |
8g5323 Lift Cylinder Lines Group-Part 1 Of 2
| 8G***23 | Lines Group-Lift Cylinder | 1 |
7p4686 Pump Lines Group
| 7P***86 | Lines Group-Pump | 1 |
8g3976 Rear Attachment Lines Group
| 8G***76 | Lines Group-Rear Attachment; Rear Attachment Lines Group | 1 |
7p1098 Rear Attachment Lines Group
| 7P***98 | Lines Group-Rear Attachment; Rear Attachment Lines Group | 1 |
1u4504 Ripper Lines Group
| 1U***04 | Lines Group-Ripper; Ripper Lines Group | 1 |
8g0648 Tilt Cylinder Lines Group
| 8G***48 | Lines Group-Tilt Cylinder | 1 |
7p7017 Tilt Cylinder Lines Group
| 7P***17 | Lines Group-Tilt Cylinder | 1 |
3w1025 Tilt Cylinder Lines Group
| 3W***25 | Lines Group-Tilt Cylinder; Tilt Cylinder Lines Group-Special | 1 |
7p1074 Hydraulic Tank Mounting Group
| 7P***74 | Mounting Group-Hydraulic Tank | 1 |
3w1024 Cylinder Pin Group
| 3W***24 | Pin Group-Cylinder; Cylinder Pin Group-Special Lift Arms | 1 |
8g7153 Vane Pump Group-Type 2
| 8G***53 | Pump Group-Vane; Vane Pump Group | 1 |
8g7151 Vane Pump Group
| 8G***51 | Pump Group-Vane | 1 |
3g1752 Vane Pump Group
| 3G***52 | Pump Group-Vane | 1 |
8g7153 Vane Pump Group-Type 1
| 8G***53 | Pump Group-Vane; Vane Pump Group | 1 |
7p5900 Vane Pump Group
| 7P***00 | Pump Group-Vane | 1 |
3g2805 Vane Pump Group-Replaced By 9t1696-Page 181b
| 3G***05 | Pump Group-Vane | 1 |
9t1696 Vane Pump Group
| 9T***96 | Pump Group-Vane | 1 |
9j7263 Hydraulic Tank And Valve Group-Part 1 Of 3-Type 1
| 9J***63 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8143 Hydraulic Tank And Valve Group-Part 2 Of 3-Type 3
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8143 Hydraulic Tank And Valve Group-Part 2 Of 3-Type 5
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8142 Hydraulic Tank And Valve Group-Part 1 Of 3-Type 1
| 3G***42 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
9j7262 Hydraulic Tank And Valve Group-Part 3 Of 3
| 9J***62 | Tank & Valve Group | 1 |
3g8142 Hydraulic Tank And Valve Group-Part 2 Of 3-Type 4
| 3G***42 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8143 Hydraulic Tank And Valve Group-Part 3 Of 3-Type 3
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
9j7263 Hydraulic Tank And Valve Group-Part 1 Of 3-Type 2
| 9J***63 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8142 Hydraulic Tank And Valve Group-Part 3 Of 3-Type 1
| 3G***42 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
9j7262 Hydraulic Tank And Valve Group-Part 2 Of 3
| 9J***62 | Tank & Valve Group | 1 |
3g8142 Hydraulic Tank And Valve Group-Part 3 Of 3-Type 3
| 3G***42 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
9j7262 Hydraulic Tank And Valve Group-Part 1 Of 3
| 9J***62 | Tank & Valve Group | 1 |
3g8143 Hydraulic Tank And Valve Group-Part 3 Of 3-Type 1
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
9j7263 Hydraulic Tank And Valve Group-Part 3 Of 3-Type 3
| 9J***63 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
9j7263 Hydraulic Tank And Valve Group-Part 3 Of 3-Type 2
| 9J***63 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8142 Hydraulic Tank And Valve Group-Part 2 Of 3-Type 2
| 3G***42 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8143 Hydraulic Tank And Valve Group-Part 3 Of 3-Type 5
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
9j7263 Hydraulic Tank And Valve Group-Part 2 Of 3-Type 2
| 9J***63 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8143 Hydraulic Tank And Valve Group-Part 1 Of 3-Type 5
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8143 Hydraulic Tank And Valve Group-Part 2 Of 3-Type 2
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8142 Hydraulic Tank And Valve Group-Part 2 Of 3-Type 1
| 3G***42 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8143 Hydraulic Tank And Valve Group-Part 1 Of 3-Type 1
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8142 Hydraulic Tank And Valve Group-Part 1 Of 3-Type 4
| 3G***42 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
9j7263 Hydraulic Tank And Valve Group-Part 1 Of 3-Type 3
| 9J***63 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8143 Hydraulic Tank And Valve Group-Part 1 Of 3-Type 4
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8143 Hydraulic Tank And Valve Group-Part 3 Of 3-Type 4
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8142 Hydraulic Tank And Valve Group-Part 1 Of 3-Type 2
| 3G***42 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8142 Hydraulic Tank And Valve Group-Part 3 Of 3-Type 4
| 3G***42 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8142 Hydraulic Tank And Valve Group-Part 1 Of 3-Type 5
| 3G***42 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8142 Hydraulic Tank And Valve Group-Part 2 Of 3-Type 3
| 3G***42 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8143 Hydraulic Tank And Valve Group-Part 3 Of 3-Type 2
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8143 Hydraulic Tank And Valve Group-Part 1 Of 3-Type 3
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8143 Hydraulic Tank And Valve Group-Part 2 Of 3-Type 4
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8143 Hydraulic Tank And Valve Group-Part 1 Of 3-Type 2
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
9j7263 Hydraulic Tank And Valve Group-Part 2 Of 3-Type 1
| 9J***63 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
9j7263 Hydraulic Tank And Valve Group-Part 2 Of 3-Type 3
| 9J***63 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8142 Hydraulic Tank And Valve Group-Part 3 Of 3-Type 2
| 3G***42 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8142 Hydraulic Tank And Valve Group-Part 1 Of 3-Type 3
| 3G***42 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8142 Hydraulic Tank And Valve Group-Part 2 Of 3-Type 5
| 3G***42 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8142 Hydraulic Tank And Valve Group-Part 3 Of 3-Type 5
| 3G***42 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3g8143 Hydraulic Tank And Valve Group-Part 2 Of 3-Type 1
| 3G***43 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
9j7263 Hydraulic Tank And Valve Group-Part 3 Of 3-Type 1
| 9J***63 | Tank & Valve Group; Hydraulic Tank And Valve Group | 1 |
3w1295 Lines & Valve Group
| 3W***95 | Valve & Lines Group; Lines And Valve Group | 1 |
9j0456 Control Valve Group-Part 1 Of 2
| 9J***56 | Valve Group | 1 |
9j0456 Control Valve Group-Part 2 Of 2
| 9J***56 | Valve Group | 1 |
4t5796 Valve Gp-Control-Part 1 Of 2
| 4T***96 | Valve Group-Control | 1 |
4t5796 Valve Gp-Control-Part 2 Of 2
| 4T***96 | Valve Group-Control | 1 |
9j0817 Control Valve Group
| 9J***17 | Valve Group-Control | 1 |
9j7128 Diverter Valve Group
| 9J***28 | Valve Group-Diverter; -Auxiliary Front, Rear Lines | 1 |
4t9948 Relief Valve Group-Pilot Operated
| 4T***48 | Valve Group-Pitch Relief; -Secondary Steering | 1 |
4t1573 Relief Valve Group-Pilot Operated
| 4T***73 | Valve Group-Relief; Relief Valve Group-Fluid Control Inc | 1 |
9j0458 Relief Valve Group-Direct Operated
| 9J***58 | Valve Group-Relief; -Implement | 1 |
9j0460 Relief Valve Group-Pilot Operated
| 3G***33 | Valve Group-Relief; Relief Valve Group-Snap Tite Inc | 1 |
| 4T***73 | Valve Group-Relief; Relief Valve Group-Fluid Control Inc | 1 |
| 4T***96 | Seal Kit (Service Repair For 9j460) | 1 |
3g7433 Relief Valve Group-Pilot Operated
| 3G***33 | Valve Group-Relief; Relief Valve Group-Snap Tite Inc | 1 |
4t5890 Relief Valve Group-Direct Operated
| 4T***90 | Valve Group-Relief | 1 |
3g9804 Relief Valve Group-Pilot Operated
| 3G***04 | Valve Group-Relief | 1 |
| 4T***92 | Kit-Relief Valve Seal | 1 |
| 4T***50 | Valve Group-Relief; Relief Valve Gp-Fluid Control | 1 |
4t9950 Relief Valve Group-Pilot Operated
| 4T***50 | Valve Group-Relief; Relief Valve Gp-Fluid Control | 1 |
4t9951 Relief Valve Group-Pilot Operated
| 4T***51 | Valve Group-Relief; Relief Valve Group | 1 |
9j0459 Relief Valve Group-Direct Operated
| 9J***59 | Valve Group-Relief | 1 |
Implements
3g4429 Bit And Cutting Edge Group
| 3G***29 | Bit & Cutting Edge Group | 1 |
8v7363 Multi-Purpose Bucket Arrangement-1.00 M3 (1.3 Yd.3)
| 2V***62 | Seal And Cylinder Group | 2 |
| 8V***59 | Bucket Group-Multipurpose; Multi-Purpose Bucket Group | 1 |
| 8V***62 | Lines Group-Bucket; Bucket Lines Group | 1 |
4v8695 General Purpose Bucket Assembly-1.15 M3 (1.5 Yd.3)-2210 Mm
| 4V***95 | Bucket As-General Purpose | 1 |
8v7359 Multi-Purpose Bucket Group-1.03 M3 (1.3 Yd.3)-2256 Mm (88.82 In.)
| 8V***59 | Bucket Group-Multipurpose; Multi-Purpose Bucket Group | 1 |
Cutting Edges-Field Installation
| 4T***92 | Segment Edge For Use With 4v***50 Base | 1 |
| 9V***70 | Cutting Edge For Use With 4v***95 General | 1 |
4t0660 Ripper Mounting And Cylinder Group
| 4T***60 | Cylinder & Mounting Group; Ripper Mounting And Cylinder Group | 1 |
3g5128 Ripper Mounting And Cylinder Group
| 3G***28 | Cylinder & Mounting Group | 1 |
4t9562 Cutting Edge Group
| 4T***62 | Edge Group-Cutting | 1 |
3w1026 Feller Buncher Arrangement-Without Lift Arms
| 1N***46 | Turbocharger Group | 1 |
| 3W***24 | Pin Group-Cylinder; Cylinder Pin Group-Special Lift Arms | 1 |
| 3W***25 | Lines Group-Tilt Cylinder; Tilt Cylinder Lines Group-Special | 1 |
8v7370 Cylinder Mounting Group
| 8V***70 | Mounting Group-Cylinder | 1 |
4t0661 Ripper Mounting Group
| 4T***61 | Mounting Group-Ripper; Ripper Mounting Group | 1 |
3g1349 Ripper Mounting Group
| 3G***49 | Mounting Group-Ripper; Ripper Mounting Group | 1 |
3g1620 Ripper Arrangement
| 3G***20 | Ripper Ar; Ripper Arrangement | 1 |
| 9J***29 | Ripper Group; Ripper Group | 1 |
3g1619 Ripper Arrangement
| 1U***04 | Lines Group-Ripper; Ripper Lines Group | 1 |
| 3G***49 | Mounting Group-Ripper; Ripper Mounting Group | 1 |
| 3G***19 | Ripper Ar | 1 |
9j4329 Ripper Group
| 9J***29 | Ripper Group; Ripper Group | 1 |
9j3169 Tip Group-Long
| 9J***69 | Tip Group-Long; -J-250 | 1 |
9j3178 Tip Group-Short-Extreme Service
| 9J***78 | Tip Group-Short; -J-250 | 1 |
4t2253 Abrasion Tip Group-Bucket-Field Installation
| 4T***53 | Tip-Abrasion-Bucket | 1 |
3g4017 Tooth Group-Long
| 3G***17 | Tooth Group-Long | 1 |
9j1137 Ripper Tooth Group
| 9J***37 | Tooth Group-Ripper | 1 |
3g4018 Tooth Group-Short
| 3G***18 | Tooth Group-Short | 1 |
Lubrication System
6n3382 Breather Gp
| 6N***82 | Breather Group; Breather Group | 1 |
7p1087 Radiator Protection Cover Group
| 7P***87 | Cover Group-Radiator Protection; Protection Covers Group--Radiator | 1 |
8n5930 Oil Filter Group
| 8N***30 | Filter Group-Engine Oil; Engine Oil Filter Group | 1 |
6n5095 Fumes Disposal Group
| 6N***95 | Fumes Disposal Group | 1 |
7n5720 Oil Level Gauge Group
| 7N***20 | Gauge Group-Oil Level (Dipstick) | 1 |
8g5493 Drain Lines Group-Oil Filter
| 8G***93 | Lines Group-Drain | 1 |
8n3876 Oil Filler Group
| 7N***76 | Oil Filler Group; Fuel Injection Pump And Governor | 1 |
2w2833 Oil Pump Group
| 2W***33 | Pump Group-Engine Oil; Engine Oil Pump Group | 1 |
6n3053 Oil Pump Group
| 6N***53 | Pump Group-Oil; Oil Pump Group-Without Housing | 1 |
Power Train-Power Transmission Unit
9j7266 Hydrostatic Power Case Group-Part 3 Of 6
| 9J***66 | Case Group-Hydrostatic Power; Hydrostatic Power Case Group | 1 |
9j7266 Hydrostatic Power Case Group-Part 6 Of 6
| 9J***66 | Case Group-Hydrostatic Power; Hydrostatic Power Case Group | 1 |
9j7266 Hydrostatic Power Case Group-Part 5 Of 6
| 9J***66 | Case Group-Hydrostatic Power; Hydrostatic Power Case Group | 1 |
9j7266 Hydrostatic Power Case Group-Part 1 Of 6
| 9J***66 | Case Group-Hydrostatic Power; Hydrostatic Power Case Group | 1 |
9j7266 Hydrostatic Power Case Group-Part 2 Of 6
| 9J***66 | Case Group-Hydrostatic Power; Hydrostatic Power Case Group | 1 |
9j7266 Hydrostatic Power Case Group-Part 4 Of 6
| 9J***66 | Case Group-Hydrostatic Power; Hydrostatic Power Case Group | 1 |
9j3458 Hydrostatic Power Control Arrangement
| 1U***43 | Valve Group-Bypass; Cooler By-Pass Valve Group | 1 |
| 1U***71 | Valve Group-Pilot; Pilot Overspeed Valve Group | 1 |
| 3G***63 | Linkage Group-Hydraulic Power Case; Hydrostatic Power Case Linkage Group | 1 |
8g0142 Speed & Direction Control Group-Side View-Part 1 Of 2
| 8G***42 | Control Group-Speed & Direction | 1 |
8g0142 Speed & Direction Control Group-Front View-Part 2 Of 2
| 8G***42 | Control Group-Speed & Direction | 1 |
8g0142 Speed And Direction Control Group-Front View
| 8G***42 | Control Group-Speed & Direction | 1 |
8g0142 Speed And Direction Control Group-Side View
| 8G***42 | Control Group-Speed & Direction | 1 |
3g4503 Transmission Control Group-Part 2
| 3G***03 | Control Group-Transmission; Transmission Control Group | 1 |
3g4503 Transmission Control Group-Part 1
| 3G***03 | Control Group-Transmission; Transmission Control Group | 1 |
3g4648 Cylinder Group (Change 1)-R.H.
| 3G***48 | Cylinder Group-Servo; Cylinder Group-R.H. | 1 |
3g4647 Cylinder Group (Change 1)-L.H.-82.55 Mm (3.25 In.)
| 3G***47 | Cylinder Group-Servo; Cylinder Group-L.H. | 1 |
7p6513 Flexible Coupling Drive Group
| 7P***13 | Drive Group-Flexible Coupling | 1 |
7p2612 Transmission And Drive Motor Fastener Group
| 7P***12 | Fastener Group-Tmsn & Drive Motor | 1 |
7p9903 Transmission And Pump Drive Filler Group
| 7P***03 | Filler Group-Tmsn & Pump Drive | 1 |
3g1856 Filter Group-Main
| 3G***56 | Filter Group; Filter Group--Main | 1 |
3g1856 Main Filter Group
| 3G***56 | Filter Group; Filter Group--Main | 1 |
8g0136 Final Drive Group-Part 1 Of 2
| 8G***36 | Final Drive Group | 1 |
8g0136 Final Drive Group-Part 2 Of 2
| 8G***36 | Final Drive Group | 1 |
8g6780 Sprocket Guard Group
| 8G***80 | Guard Group-Sprocket | 1 |
9j2092 Hydrostatic Lines Group
| 9J***92 | Lines Group-Hydrostatic | 1 |
9j2092 Lines Gp-Hydrostatic
| 9J***92 | Lines Group-Hydrostatic | 1 |
3g7395 Hydrostatic Power Case And Lines Group-Part 1
| 3G***95 | Lines Group-Hydrostatic Pwr Case; Hydrostatic Power Case Lines Group | 1 |
3g7395 Hydrostatic Power Case Lines Group-Part 2 Of 2
| 3G***95 | Lines Group-Hydrostatic Pwr Case; Hydrostatic Power Case Lines Group | 1 |
3g7395 Hydrostatic Power Case Lines Group-Part 2
| 3G***95 | Lines Group-Hydrostatic Pwr Case; Hydrostatic Power Case Lines Group | 1 |
3g7395 Hydrostatic Power Case Lines Group-Part 1 Of 2
| 3G***95 | Lines Group-Hydrostatic Pwr Case; Hydrostatic Power Case Lines Group | 1 |
7p1068 Power Train Cooler Lines Group
| 7P***68 | Lines Group-Power Train Cooler | 1 |
3g1163 Hydrostatic Power Case And Linkage Group-Part 1
| 3G***63 | Linkage Group-Hydraulic Power Case; Hydrostatic Power Case Linkage Group | 1 |
3g1163 Hydrostatic Power Case And Linkage Group-Part 1 Of 2
| 3G***63 | Linkage Group-Hydraulic Power Case; Hydrostatic Power Case Linkage Group | 1 |
3g1163 Hydrostatic Power Case Linkage Group-Part 2
| 3G***63 | Linkage Group-Hydraulic Power Case; Hydrostatic Power Case Linkage Group | 1 |
3g1163 Hydrostatic Power Case And Linkage Group-Part 2 Of 2
| 3G***63 | Linkage Group-Hydraulic Power Case; Hydrostatic Power Case Linkage Group | 1 |
3g1163 Hydrostatic Power Case Linkage Group-Part 2 Of 2
| 3G***63 | Linkage Group-Hydraulic Power Case; Hydrostatic Power Case Linkage Group | 1 |
3g0623 Servo Linkage Group-Part 2 0f 2
| 3G***23 | Linkage Group-Servo | 1 |
3g0623 Servo Linkage Group-Part 1 Of 2
| 3G***23 | Linkage Group-Servo | 1 |
4t1695 Piston Motor Group-Part 1
| 4T***95 | Motor Group-Piston | 1 |
4t1695 Piston Motor Group-Part 2
| 4T***95 | Motor Group-Piston | 1 |
4t0330 Link Motor Group-Part 1
| 4T***30 | Motor Group-Piston | 1 |
3g3842 Link Motor Group-Fixed Displacement-2 Required-Part 2
| 3G***42 | Motor Group-Piston | 1 |
3g3842 Link Motor Group-Fixed Displacement-2 Required-Part 1
| 3G***42 | Motor Group-Piston | 1 |
4t0330 Link Motor Group-Part 2
| 4T***30 | Motor Group-Piston | 1 |
4t1582 Piston Motor Gp-Part 2 Of 2
| 4T***82 | Motor Group-Piston-Link | 1 |
4t1582 Piston Motor Gp-Part 1 Of 2
| 4T***82 | Motor Group-Piston-Link | 1 |
4t1582 Piston Motor Group-Part 1 Of 2
| 4T***82 | Motor Group-Piston-Link | 1 |
4t1582 Piston Motor Group-Part 2 Of 2
| 4T***82 | Motor Group-Piston-Link | 1 |
9j2091 Axial Piston Pump Group-Variable Displacement-L.H.
| 9J***91 | Pump Group-Axial Piston; Axial Piston Pump Group-L.H. | 1 |
9j2090 Axial Piston Pump Group-Variable Displacement-R.H.
| 9J***90 | Pump Group-Axial Piston; Axial Piston Pump Group-R.H. | 1 |
3g1803 Charge Pump Group-Fixed Displacement
| 3G***03 | Pump Group-Charge; Charge Pump Group | 1 |
4t5739 Motor Retainer Group-Service
| 0S***30 | Pin (Part Of 2s***65 Assem.) | 1 |
| 4T***37 | Shaft | 1 |
| 4T***38 | Retainer | 1 |
7p6504 Sprocket Segment Group
| 7P***04 | Segment Group-Sprocket | 1 |
4t5569 Valve Group
| 4T***69 | Valve Group | 1 |
9j1839 Relief Valve Group
| 9J***39 | Valve Group; Charge Relief Valve Group | 1 |
9j9324 Underspeed Valve Group
| 9J***24 | Valve Group-Actuator; Underspeed Valve Group | 1 |
4t2718 Valve Group
| 4T***18 | Valve Group-Blocker | 1 |
1u2043 Cooler By-Pass Valve Group
| 1U***43 | Valve Group-Bypass; Cooler By-Pass Valve Group | 1 |
3g4070 Cooler By-Pass Valve Group
| 3G***70 | Valve Group-Bypass; Cooler By-Pass Valve Group | 1 |
3g8448 Underspeed Override Valve Group
| 3G***48 | Valve Group-Override; Underspeed Override Valve Group | 1 |
1u4771 Pilot Overspeed Valve Group
| 1U***71 | Valve Group-Pilot; Pilot Overspeed Valve Group | 1 |
3g0257 Servo Relief Valve Group
| 3G***57 | Valve Group-Relief | 1 |
9j0365 Charge And Main Relief Valve Group-L.H.-Part 1
| 9J***65 | Valve Group-Replenishing-Lh | 1 |
9j0365 Charge And Main Relief Valve Group-L.H.-Part 2
| 9J***65 | Valve Group-Replenishing-Lh | 1 |
9j8554 Charge And Main Relief Valve Group-R.H.-Part 2
| 9J***54 | Valve Group-Replenishing-Rh | 1 |
9j8554 Charge And Main Relief Valve Group-R.H.-Part 1
| 9J***54 | Valve Group-Replenishing-Rh | 1 |
3g4594 Servo Valve Group-L.H.
| 3G***94 | Valve Group-Servo | 1 |
3g4595 Servo Valve Group-R.H.
| 3G***95 | Valve Group-Servo | 1 |
3g3253 Shuttle Valve Group
| 3G***53 | Valve Group-Shuttle | 1 |
4t3056 Shuttle Valve Group
| 4T***56 | Valve Group-Shuttle | 1 |
Service Equipment And Supplies
8k7534 Fire Extinguisher Group
| 8K***34 | Fire Extinguisher Group | 1 |
8g5101 Fire Extinguisher Group
| 8G***01 | Fire Extinguisher Group | 1 |
Gasket Kits
| 6V***87 | Valve Grinding | 0 |
| 6V***88 | Central And Lower Structure | 0 |
| 6V***89 | Front Structure Engine Serial No. | 0 |
8f9866 Grease Gun
| 8F***66 | Grease Gun As | 1 |
6v2121 Hand Tool Group
| 6V***21 | Hand Tool Group | 1 |
Name Plates And Films
| 3N***90 | Plate Serial Number; On R.H. Rear Bank Of Cylinder Block As Viewed From Rear Of Engine | 1 |
| 4B***58 | Screw (Identification Plate) Mounting | 32 |
| 5P***97 | Plate-Warning (Universal); In Operators Compartment On Left Front Panel Near Top | 1 |
Starting And Electrical System
6n9294 Alternator Group-24 Volt, 35 Ampere-Part 1*R
| 6N***94 | Alternator Group; (24-Volt, 35-Ampere) | 1 |
6n9294 Alternator Group-24 Volt, 35 Ampere-Part 2*R
| 6N***94 | Alternator Group; (24-Volt, 35-Ampere) | 1 |
6n7223 Alternator Group-24 Volt, 50 Ampere
| 6N***23 | Alternator Group-Charging | 1 |
6n7262 Alternator Group-24 Volt, 35 Ampere
| 6N***62 | Alternator Group-Charging | 1 |
3t1888 Alternator Group-Delco-Remy-24 Volt, 50 Ampere
| 3T***88 | Alternator Group-Charging; Alternator Group Delco-Remy 24 Volt, 50 Ampere | 1 |
5s9088 Alternator Group-24 Volt, 50 Ampere-Part 1-Type 1*R
| 5S***88 | Alternator Group-Charging | 1 |
9g9538 Alternator Group-24 Volt, 50 Ampere
| 9G***38 | Alternator Group-Charging | 1 |
5s9088 Alternator Assembly-24 Volt, 50 Ampere-Type 2*R
| 3T***88 | Alternator Group-Charging; Alternator Group Delco-Remy 24 Volt, 50 Ampere | 1 |
| 5S***88 | Alternator Group-Charging | 1 |
| 9G***38 | Alternator Group-Charging | 1 |
5s9088 Alternator Group-24 Volt, 50 Ampere-Part 2-Type 1*R
| 5S***88 | Alternator Group-Charging | 1 |
7p1044 Battery And Wiring Group-24 Volt-Part 3 Of 3
| 7P***44 | Battery & Wiring Group | 1 |
7p1044 Battery And Wiring Group-24 Volt-Part 1 Of 3
| 7P***44 | Battery & Wiring Group | 1 |
7p1044 Battery And Wiring Group-24 Volt-Part 2 Of 3
| 7P***44 | Battery & Wiring Group | 1 |
7p5818 Heavy Duty Battery Group-Type 1
| 7P***18 | Battery Group; Heavy Duty Battery Group | 1 |
7p5818 Heavy Duty Battery Group-Type 2
| 7P***18 | Battery Group; Heavy Duty Battery Group | 1 |
7p6502 Cover Group-Open Rops
| 7P***02 | Cover Group-Protection; Miscellaneous Covers Group--Open Rops | 1 |
7p9804 Harness Assembly
| 7P***04 | Harness As | 1 |
8g3856 Harness Assembly
| 8G***56 | Harness As | 1 |
7p9510 Harness Assembly
| 7P***10 | Harness As | 1 |
8g3857 Harness Assembly
| 8G***57 | Harness As | 1 |
8g3131 Harness Assembly
| 8G***31 | Harness As | 1 |
8g3132 Harness Assembly
| 8G***32 | Harness As | 1 |
8g0410 Harness Assembly
| 8G***10 | Harness As | 1 |
7p1041 Electric Horn Group
| 7P***41 | Horn Group-Electric | 1 |
7g8970 Dash Lamp Group
| 7G***70 | Lamp Group; (Dash-24 Volt) | 1 |
6n7989 Flood Lamp Group-24 Volt
| 6N***89 | Lamp Group-Flood; -Ladder Access | 1 |
8g0961 Lighting Arrangement-Open Rops-2 Lamp
| 7P***21 | Lighting Group-2 Lamp | 1 |
| 7P***02 | Cover Group-Protection; Miscellaneous Covers Group--Open Rops | 1 |
| 8G***61 | Lighting Ar | 1 |
7p1121 Lighting Group-2 Lamp
| 7P***21 | Lighting Group-2 Lamp | 1 |
7p6908 Lighting Group-4 Lamp-Type 3
| 7P***08 | Lighting Group-4 Lamp | 1 |
7p6908 Lighting Group-4 Lamp-Type 1
| 7P***08 | Lighting Group-4 Lamp | 1 |
7p6908 Lighting Group-4 Lamp-Type 2
| 7P***08 | Lighting Group-4 Lamp | 1 |
8n2447 Electric Starting Motor Group-Delco-Remy-24 Volt-Part 2
| 8N***47 | Motor Group-Electric Starting | 1 |
8n2447 Electric Starting Motor Group-Delco-Remy-24 Volt-Part 1
| 8N***47 | Motor Group-Electric Starting | 1 |
3t3421 Solenoid Assembly-24 Volt
| 3T***21 | Solenoid As | 1 |
3t4704 Solenoid Assembly-24 Volt
| 3T***04 | Solenoid As-Starter; (24-Volt) | 1 |
7p1076 Ether Starting Aid Group
| 7P***76 | Starting Aid Group-Ether; Ether Starting Aid Group | 1 |
8g3559 Low Temperature Starting Arrangement
| 6N***39 | Heater Group-Jacket Water; Jacket Water Heater Group | 1 |
| 7P***76 | Starting Aid Group-Ether; Ether Starting Aid Group | 1 |
| 7P***18 | Battery Group; Heavy Duty Battery Group | 1 |
3t2756 Electric Starting Motor Group-24 Volt-Delco-Remy-Part 3 Of 3
| 3T***56 | Starting Motor Group-Electric; Starting Motor Gp-Electric-Delco-Remy | 1 |
3t2371 Electric Starting Motor Group
| 3T***71 | Starting Motor Group-Electric; Electric Starting Motor Group | 1 |
3t2764 Electric Starting Motor Group*R
| 3T***71 | Starting Motor Group-Electric; Electric Starting Motor Group | 1 |
| 3T***56 | Starting Motor Group-Electric; Starting Motor Gp-Electric-Delco-Remy | 1 |
| 3T***64 | Starting Motor Group-Electric | 1 |
6n1678 Electric Starting Motor Group
| 6N***78 | Starting Motor Group-Electric | 1 |
3t2756 Electric Starting Motor Group-24 Volt-Delco-Remy-Part 1 Of 3
| 3T***56 | Starting Motor Group-Electric; Starting Motor Gp-Electric-Delco-Remy | 1 |
3t2756 Electric Starting Motor Group-24 Volt-Delco-Remy-Part 2 Of 3
| 3T***56 | Starting Motor Group-Electric; Starting Motor Gp-Electric-Delco-Remy | 1 |
7n0718 Disconnect Switch Assembly
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
7n8000 Switch Assembly
| 7N***00 | Switch As-Toggle; (Warning Light) | 1 |
9g1480 Starter Switch Group
| 9G***80 | Switch Group-Heat Start | 1 |
7p1043 Back-Up Warning Group
| 7P***43 | Warning Group-Backup | 1 |
7p1042 Operator Warning Group
| 7P***42 | Warning Group-Operator | 1 |
Steering Clutches And Brakes
7p8945 Parking Brake Group
| 7P***45 | Brake Group-Parking | 1 |
7p6603 Brake Control Group-Part 2
| 7P***03 | Control Group-Parking Brake | 1 |
7p6603 Brake Control Group-Part 1
| 7P***03 | Control Group-Parking Brake | 1 |
7p6610 Retarder Brake Valve Group
| 7P***10 | Control Group-Spd Override & Brk | 1 |
8g0143 Steering Control Group-Part 1
| 8G***43 | Control Group-Steering | 1 |
8g0143 Steering Control Group-Part 2
| 8G***43 | Control Group-Steering | 1 |
7p8328 Pump Group-Hand
| 7P***28 | Pump Group-Hand | 1 |
8g6272 Pump Group-Hand
| 8G***72 | Pump Group-Hand | 1 |
953 serial number reference
The PIN plate is on the left side of the machine, on the support arm just ahead of the cab, with the number also stamped into the frame beside the plate. On this pre-2002 Cat format the first three characters (e.g. 20Z, 76Y) are the prefix identifying the build series/plant, and the digits that follow are the sequential unit number within that run - so a plate reading 20Z00267 is unit 267 of the 20Z run.
| Prefix | Identifies | Notes |
|---|---|---|
| 05Z | USA-built, LGP (Low Ground Pressure) configuration | LGP unit with wider track gauge (about 180 cm / 71 in) for lower ground pressure. Cat 3204 direct-injection turbocharged inline-4, about 110 flywheel hp (82 kW). Hydrostatic transmission. Built early-to-mid 1980s; USA assembly of the 953 wound down around 1984, while the Japan and France plants kept building the model into the later 1980s ahead of the 953B changeover in the early 1990s. |
| 76Y | USA-built, standard-gauge configuration | Standard-gauge unit (narrower track shoes than the LGP 05Z). Same Cat 3204 direct-injection turbocharged inline-4, about 110 flywheel hp (82 kW), hydrostatic transmission. Built early-to-mid 1980s; USA assembly wound down around 1984, while the Japan and France plants kept building the model into the later 1980s ahead of the 953B changeover in the early 1990s. |
| 44Z | Japan-built, LGP configuration | LGP unit with wider track gauge (about 180 cm / 71 in) for lower ground pressure, assembled at the Japan plant. Same Cat 3204 direct-injection turbocharged inline-4 and hydrostatic transmission as the USA-built units. |
| 78Y | Japan-built, standard-gauge configuration | Standard-gauge unit assembled at the Japan plant, narrower track shoes than the 44Z LGP. Same Cat 3204 direct-injection turbocharged inline-4 and hydrostatic transmission. |
| 20Z | France-built, LGP configuration | LGP unit with wider track gauge (about 180 cm / 71 in), assembled at the France plant. Same Cat 3204 direct-injection turbocharged inline-4 and hydrostatic transmission. Parts and service literature for this run extend later into the 1980s than the USA-built prefixes, consistent with France being one of the last plants building the model before the 953B changeover. |
| 77Y | France-built, standard-gauge configuration | Standard-gauge unit assembled at the France plant, narrower track shoes than the 20Z LGP. Same Cat 3204 direct-injection turbocharged inline-4 and hydrostatic transmission. |
Frequently asked questions
What engine does the Caterpillar 953 track-type loader use?
This vintage 953 (built roughly 1981-1993) runs a Cat 3204 direct-injection, turbocharged four-cylinder diesel rated around 82 kW (110 hp), mechanically governed with no electronic engine management.
What is the operating weight of the Caterpillar 953?
Operating weight is about 14,100 kg (31,080 lb), varying with standard-gauge or LGP (low ground pressure) track configuration.
What replaced the Caterpillar 953?
The 953B replaced this vintage 953, moving up to a Cat 3116 turbocharged six-cylinder engine. Caterpillar's unrelated, current-production 'Track Loader' also carrying the 953 name is a separate, later reuse of the number and is not this machine's successor.
What 953 owners discuss
My 953 loses speed or bogs down once it warms up, or when I run the throttle to full - is that normal?
This is one of the most repeated complaints about this loader. Some owners find the machine creeps along once the hydrostatic drive reaches operating temperature; others find it slows noticeably as soon as the engine speed lever goes to the fast position, and end up running at partial throttle just to get usable speed. Before condemning the drive pump or motor, check that the linkage running from the foot pedals down to the pump control box is completely free and correctly rigged, and confirm the charge pump is supplying full flow to the system. A binding or mis-rigged linkage, not a worn pump, turns out to be the most common explanation once a machine has some hours on it.
Does the 953 use steering clutches or brakes like other crawler loaders of this era?
No. Each track has its own hydrostatic circuit, and direction is set entirely by varying the two drive pumps' output, not by a clutch-and-brake pack. If one track won't stop, slow down, or reverse the way it should, the cause is almost always in the pedal linkage feeding the pump control rather than a worn brake band. Look for a missing or loose pin or bolt connecting the pedal to its control lever, and confirm the full linkage travels freely with no binding from packed dirt or a bent rod before condemning the pump itself. Because a loss of directional control on a machine this size is a safety issue, have your dealer verify pump and linkage function before putting it back to work.
Does it matter what oil goes in the hydrostatic drive?
Yes, more than it would on a conventional powershift machine. The factory calls for a straight light-weight oil in the hydrostatic circuit, and owners are consistent that this isn't a spec worth improvising on: the internal tolerances are tight enough that running the wrong viscosity has been reported to work fine for a short while and then leave the machine crawling. Use a quality branded oil that meets the Caterpillar hydraulic fluid specification rather than substituting a heavier product just because it's on the shelf.
What undercarriage wear points should I watch on a 953 this age?
The oscillating track-roller-frame design and sealed, lubricated track were both standard on this loader and hold up well when maintained, but a few wear points come up again and again in owner discussions. The track adjuster rod is often the first thing to get delicate once the tracks themselves have run out their sealed life. The equalizer bar ends, center pin, and pivot shafts take the oscillating loads and deserve a close look, along with the sprocket segment hardware, which is worth checking to confirm it's still welded or bolted as it should be rather than backing out. Beyond that, treat track sag and roller wear the same way you would on any crawler loader of this size and weight class.
What's the reputation of the turbocharged Cat 3204 in this loader?
Mixed. It's a simple, mechanically governed four-cylinder diesel that's easy to work on, but the turbocharged version fitted to this loader has a reputation among owners as underpowered for the machine's weight, and some ask openly why Caterpillar didn't use the larger engine fitted to the bigger 955 instead. The factory piston and ring package on this engine allows more blow-by than later designs, so some smoke and crankcase blow-by at operating temperature is normal wear behavior rather than proof of a bad engine, though it does make a compression check on a used, well-worn unit less conclusive on its own. A no-start with white smoke in cold weather usually points to the glow plugs; a no-start with no fuel delivery points to the fuel shutoff solenoid or a stuck governor rack on the injection pump rather than the injectors themselves.
What electrical problems show up on a 953 this old?
Most complaints trace back to age and corrosion rather than a wiring design fault. A no-crank condition, or a starter that clunks once and stops, is more often a corroded battery terminal, ground strap, or solenoid contact than a failed starter motor, and owners recommend cleaning every ground connection and battery post before swapping parts. The gauge cluster on this loader monitors coolant temperature, drive pump oil temperature, hydraulic tank oil temperature, and fuel level, so an erratic or dead gauge is usually a bad connector or ground at the sending unit rather than the gauge itself. Given the loader's age, brittle wire insulation and corroded connectors under the dash are worth a visual check any time an electrical fault shows up.
What should I check before buying a used vintage 953?
Warm the machine up and drive it in a straight line for a good stretch; it should track true, and any noticeable pull to one side can point to a worn drive pump or track motor, which is an expensive repair. Walk the undercarriage and check the equalizer bar ends, center pin, pivot shafts, track adjusters, idler guards, and sprocket segment hardware for wear or missing fasteners. Pull the engine oil dipstick and check under the valve cover for water contamination, milky oil, or rust, especially on a machine that's sat idle for a while. Ask for service history to confirm the hydrostatic drive has been kept on the correct fluid, since pump, motor, and undercarriage repairs are the biggest expense on one of these, and have your dealer verify drive and hydraulic condition on anything you're seriously considering.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar 953. Related factory variants of the same model family:
953
Need a specific 953 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.