Caterpillarwheel-type loaderwheel loader
Caterpillar 930H
Maintenance schedule, common problems & OEM parts breakdown
The Cat 930H is a small/mid-size wheel-type loader in Caterpillar's H-series lineup, built roughly 2008 to 2014 and sold under DHC and later FTD serial-number prefixes. It runs a Cat C6.6 ACERT six-cylinder turbocharged diesel meeting Tier 3/Stage IIIA emissions, rated 111 kW (149 hp) net. Base operating weight lists at 13,029 kg (28,725 lb); actual weight shifts with bucket choice, counterweight, and tire spec. It sat in the H-series alongside the smaller 924H/924HZ and 928HZ and the larger 938H, built for aggregate handling, general construction, and yard or waste work. Cat offered it with the standard Z-bar loader linkage or an optional High-Lift VersaLink arrangement for extra dump clearance, a powershift transmission with forward and reverse gears, and a range of general-purpose, multi-purpose, and light-material buckets plus pallet-fork and quick-coupler tool-carrier setups.
The 930H replaced the 930G, which ran an older, mechanically simpler 3126B-era diesel; the H-series switch brought ACERT emissions control plus updated hydraulics and electronics to the platform. Within 930H production, the DHC-to-FTD serial break marks a running engineering change Cat made without renaming the model. The 930K then replaced the 930H, keeping the same C6.6 ACERT engine family but stepping power up to 119 kW (160 hp), adding Tier 4 Interim aftertreatment with passive regeneration, and swapping the powershift transmission for a stepless hydrostatic drive - a bigger mechanical break than the G-to-H change. That gap keeps the 930H active in the used and parts market today: its simpler pre-aftertreatment powertrain and conventional driveline are cheaper to diagnose and rebuild than a Tier 4 successor, making it a common shop machine for buyers who want to avoid DPF and SCR complexity.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 930H specifications
Engine
| Model | Cat C6.6, 6-cylinder diesel |
| Rated net power | 111 kW (149 hp) at 2,300 rpm per SAE J1349; 112 kW (150 hp) per ISO 9249 and EEC 80/1269 |
| Max net power | 119 kW (160 hp) at 2,000 rpm per SAE J1349; 120 kW (161 hp) per ISO 9249 and EEC 80/1269 |
| Displacement | 6.6 L (403 in3) |
| Bore x stroke | 105 mm x 127 mm (4.13 in x 5.00 in) |
| Torque | 727 N·m (536 lb-ft) net; 742 N·m (547 lb-ft) peak |
| Emissions | Meets Tier 3 off-highway emission standards. No power derate to 3,000 m (9,843 ft) altitude; auto-derate protects the hydraulic and transmission systems above that. |
Weights
| Operating weight (base spec) | 13,029 kg (28,725 lb) with counterweight, deluxe cab, limited-slip rear axle with heavy-duty brakes, 2.1 m3 (2.6 yd3) bolt-on-edge bucket, full fuel and 20.5 R25 L-3 radial tires |
| Operating weight, bucket configurations | 12,848-13,221 kg (28,325-29,147 lb) across 2.1-2.5 m3 (2.7-3.3 yd3) coupler and pin-on bucket options |
| Operating weight, with pallet forks | 12,580-12,818 kg (27,734-28,259 lb), varies by fork length and Standard vs High Lift linkage |
| Static tipping load, full 40-degree turn | 7,785-10,007 kg (17,164-22,061 lb), varies by bucket size and coupler/pin-on setup; base spec (2.1 m3 bucket) is 8,310 kg (18,321 lb) |
| Static tipping load, straight | 8,951-10,007 kg (19,733-22,061 lb), varies by bucket configuration |
| Ground pressure / shipping weight | Not published for this wheel-type loader; only operating weight is factory-rated |
Dimensions
| Overall length | 7.43-7.75 m (24 ft 5 in-25 ft 5 in) with Standard VersaLink linkage, depending on bucket; up to 8.08 m (26 ft 6 in) with High Lift VersaLink |
| Width over tires | 2,570 mm (8 ft 5 in) with 20.5 R25 L-3 radial tires; 2,407-2,570 mm (7 ft 11 in-8 ft 5 in) across other tire options |
| Height to top of ROPS/FOPS cab | 3,278 mm (10 ft 9 in) |
| Height to top of hood | 2,234 mm (7 ft 4 in) |
| Wheelbase | 2,900 mm (9 ft 6 in) |
| Ground clearance | 411 mm (1 ft 4 in) |
| Minimum turning radius, over tires | 5,186-5,275 mm (17 ft 0 in-17 ft 4 in), varies by tire choice |
| Minimum turning radius, over bucket | 5,918 mm (19 ft 5 in) |
| Overall height, bucket at full raise | 5,263-5,803 mm (17 ft 3 in-19 ft 0 in), varies by bucket and linkage |
| Rated bucket capacity | 2.1-2.5 m3 (2.7-3.3 yd3) depending on bucket, 2,550 mm (8 ft 4 in) width |
Performance
| Forward travel speed (4-speed powershift) | 1st 7.3 km/h (4.5 mph), 2nd 12.3 km/h (7.6 mph), 3rd 24.1 km/h (15 mph), 4th (max) 38.3 km/h (23.8 mph) |
| Reverse travel speed (3-speed) | 1st 7.3 km/h (4.5 mph), 2nd 12.3 km/h (7.6 mph), 3rd (max) 24.1 km/h (15 mph) |
| Breakout force | 12,199-15,580 kg (26,894-34,348 lb), varies by bucket size and coupler/pin-on setup |
| Digging depth | 150-201 mm (5.9-7.9 in), varies by bucket |
| Dump clearance, full lift/45-degree dump | 2,727-3,017 mm (8 ft 11 in-9 ft 11 in), varies by bucket |
| Reach, full lift/45-degree dump | 923-1,070 mm (3 ft 0 in-3 ft 6 in), varies by bucket |
| Hydraulic cycle time | Raise 5.0 sec, dump 1.7 sec, lower (float down) 2.8 sec, total cycle 9.5 sec |
| Articulation/steering angle | 40 degrees each direction |
Service capacities (summary)
| Fuel tank | 225 L (59.4 gal) |
| Cooling system | 40 L (10.6 gal) |
| Engine oil (crankcase) | 15 L (4.0 gal) |
| Transmission | 34.5 L (9.1 gal) |
| Front differential/final drive | 26 L (6.9 gal) |
| Rear differential/final drive | 25 L (6.6 gal) |
| Hydraulic system | 148 L (39 gal) including tank; hydraulic tank alone 70 L (18.5 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
930H fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 15 L (4.0 US gal) | Cat DEO or Cat DEO-ULS multigrade diesel engine oil. SAE 10W-30 preferred for ambient -18 to 40C (0 to 104F); SAE 15W-40 for warmer ranges, roughly -18 to 50C (0 to 122F). Machine uses the Cat C6.6 ACERT engine. |
| Cooling system | 40 L (10.6 US gal) | Cat ELC (Extended Life Coolant), premixed, factory fill and preferred. Cat DEAC conventional antifreeze/coolant is the approved alternate. Coolant types should not be mixed. |
| Fuel tank | 225 L (59.4 US gal) | Ultra-low-sulfur No. 2-D diesel fuel per Cat fuel spec. No. 1-D diesel is permitted in cold climates for better cold-flow. |
| Transmission (power train) | 34.5 L (9.1 US gal) | Cat TDTO (Transmission/Drive Train Oil). SAE 10W, 30, or 50 selected by ambient temperature per the viscosity chart; SAE 30 is typical for temperate ranges. |
| Front axle & final drives | 26 L (6.9 US gal) | Cat TDTO, same viscosity-by-climate selection as the transmission. Final drives are integrated in the axle housing on this machine with no separate fill point. |
| Rear axle & final drives | 25 L (6.6 US gal) | Cat TDTO, same viscosity-by-climate selection as the transmission. |
| Hydraulic system (tank plus lines and cylinders) | 148 L (39 US gal) total system; tank alone approx. 70 L (18.5 US gal) | Cat HYDO Advanced 10, SAE 10W, factory fill and preferred oil across a wide ambient range. Cat TDTO SAE 30 is an approved alternate for sustained high ambient temperatures. |
| Grease (all fittings) | Spec only, no fill capacity | Cat Advanced 3Moly Grease, NLGI 2, standard factory fill, rated about -20 to 40C (-4 to 104F). Cat Multipurpose Grease (NLGI 2, non-moly) is the approved alternate for colder climates below about -20C (-4F). |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 930H maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 930H beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S.O.S sampling on the C6.6 ACERT engine oil, transmission oil, axle/final-drive oil, hydraulic oil, and coolant at every scheduled interval, not just at failure. The turbocharged, aftercooled C6.6 shows bearing and liner wear early in oil trend data, before it shows up as smoke or power loss. Track hydraulic sample trends closely since one pump and valve group feeds the loader linkage, steering, and quick coupler; contamination there affects all of them at once. Watch coolant samples for additive depletion to protect the wet-sleeve cylinder liners.
Corrective & Common Repairs
Most 930H repair calls trace to the Z-bar loader linkage: bucket pivot pins, bell-crank bushings, and tilt-cylinder pins wear from repeat bucket-loading cycles and need regular pin-and-bushing replacement. The powershift transmission's clutch packs and torque converter run hot if operators lug the machine in the wrong gear range, showing up as slipping shifts or overheating. Axle differential and final-drive seals weep with age, and the hydraulic quick-coupler cylinder is a common seal-leak point on tool-carrier machines that swap buckets and forks often.
Overhaul & Rebuild Points
High-hour C6.6 ACERT engines typically need turbocharger and fuel-injector overhaul before a full in-frame rebuild, given the engine's turbocharged, aftercooled design. The powershift transmission's clutch packs and torque converter are the major driveline rebuild items, alongside the front and rear axle final-drive planetary sets. Loader linkage pins and bushings across the Z-bar (or High-Lift VersaLink) arrangement wear as a set and are usually rebuilt together rather than piecemeal. Budget the hydraulic pump and main control valve for rebuild once flow or cycle-time samples trend down.
Seasonal & Environment Servicing
Cold climates need the C6.6 ACERT's block heater plus correct cold-weather-grade fuel and engine oil to avoid hard starts and wet-stacking; check coolant freeze protection each fall. In hot, dusty aggregate or quarry environments, shorten the air filter and cab-filter service interval well below the standard 250-hour check, since the engine's turbo pulls dust hard on loader duty cycles. Match tire compound and pressure to the working surface (rock vs. dirt vs. yard), and switch hydraulic oil viscosity grade if the machine moves between climate extremes.
930H common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 299-8229 | Filter-Fuel | Fuel system service | Check fitment → |
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 222-9020 | Filter Element As-Air | Air intake service | Check fitment → |
| 222-9021 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
930H fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 0110-03 / 0110-04 | Engine ECM loses a trustworthy coolant temperature signal. FMI 03 = signal voltage above normal or shorted high (open circuit); FMI 04 = signal shorted to ground (below about 0.2V DC for more than 8 seconds). ECM falls back to a default temperature strategy for fan and fuel control until the signal is restored. | Corroded or damaged sensor connector, a chafed harness shorting to ground or to a power source, or a failed coolant temperature sensor. | Inspect the sensor connector and nearby harness routing first. Back-probe for the expected reference voltage and ground, check sensor resistance against spec, then replace the sensor or repair the harness as confirmed. |
| 1797-03 / 1797-04 | Fuel rail (injector actuation) pressure sensor signal falls outside the ECM's expected voltage window. FMI 03 = shorted high or open circuit; FMI 04 = shorted to ground. ECM defaults to a conservative fuel map, which shows up as low power, rough running, or hard starting. Owners also report a separate low rail pressure condition where measured pressure drops below the commanded target under load. | Sensor connector corrosion, harness chafe or short, a failing rail pressure sensor, or for the low-pressure variant a weak fuel transfer pump, plugged filter, or sticking pressure control valve. | Pull active and logged codes with Cat ET first to see which variant is present. Inspect the sensor and connector and verify harness continuity, then run an actual rail pressure test if the fault points to low measured pressure rather than a wiring fault. |
| 1785-03 / 1785-04 | Intake manifold (boost) pressure sensor signal reads outside normal range. FMI 03 = voltage above normal, typically over about 4.95V DC for more than 8 seconds from an open or shorted-high circuit; FMI 04 = signal shorted low. Engine protection strategy limits power while the fault is active. | Open or shorted sensor harness, a corroded connector, or a failed intake manifold pressure sensor. | Check the sensor pigtail and harness for chafe or corrosion, verify supply voltage at the connector, then replace the sensor if the wiring checks out good. |
| 0600-03 / 0600-04 | Hydraulic oil temperature sensor signal is outside the transmission ECM's expected range, shorted high or shorted low, so the ECM cannot confirm actual hydraulic oil temperature for its protection logic. | Failed hydraulic oil temperature sensor, or a lower-cab or engine harness section open or shorted to ground or to voltage. | Check the sensor connector for corrosion, verify harness continuity back to the transmission ECM, and replace the sensor if it fails a resistance check. |
| 0826-03 / 0826-04 | Torque converter oil temperature sensor signal is out of range. Transmission ECM sees a shorted-high or shorted-low condition and loses a valid torque converter temperature reading. | Faulty torque converter oil temperature sensor, or lower-cab/transmission harness shorted to ground or to a power source. | Check sensor wiring and the connector, bench test the sensor, then repair the harness or replace the sensor as confirmed. |
| 0190-02 | Primary engine speed (crank position) sensor signal is erratic, intermittent, or drops out. ECM loses confidence in engine speed and timing, which can show up as rough running, a hard start, or an unexpected shutdown. | Loose or intermittent harness connector, a failing crank position sensor, or an ECM fault. | Inspect connectors for looseness or corrosion, check sensor mounting and air gap, then calibrate or replace the sensor before it causes a no-start condition. |
| 0100-03 / 0100-04 | Engine oil pressure sensor signal sits outside the normal voltage range, so the ECM cannot confirm actual oil pressure from this sensor. Separate from the E0360 event, which reports genuinely low measured pressure rather than a bad sensor signal. | Corroded connector, a harness fault, or a failed oil pressure sensor. | Check the connector and harness first, verify sensor signal against a known-good reference, and replace the sensor if it is out of spec. |
| E0360 | Low engine oil pressure warning event. Trips when measured oil pressure drops below the ECM's minimum setpoint for current engine speed; clears once pressure rises about 21 kPa (3 psi) above setpoint for 20 seconds. Continued operation on this warning risks engine damage. | Low oil level, a worn or failing oil pump, a plugged oil pickup or filter, or excess bearing clearance from wear. | Shut the engine down as soon as it is safe to do so. Check oil level and condition, then measure actual oil pressure at idle and at full throttle against spec before returning the machine to service. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
930H attachments & work tools
General-purpose buckets
Cat offers general-purpose buckets sized 2.1 m³ (2.75 yd³), 2.3 m³ (3.0 yd³) and 2.5 m³ (3.25 yd³) for this loader class, plus penetration, light-material, multi-purpose, side-dump, high-dump and wood-chip profiles for different materials and densities. Exact capacity fitted depends on linkage (standard vs High Lift), counterweight and tire selection.
Pallet forks and material handling
Standard-width fork carriages come in 1220 mm (48 in), 1370 mm (53 in) and 1524 mm (60 in), with a wide 2440 mm (96 in) carriage carrying 1830 mm (72 in) or 1524 mm (60 in) tines for pallet and bulk material work. Offset forks are offered for improved tip visibility, and a material handling arm mounts on the same carriage.
Log and lumber forks
Log and lumber forks are offered with a choice of top-clamp styles for handling round or stacked material. These use the loader's standard fork-carriage/coupler interface, so rated capacity follows the carriage rating for the machine.
Loader linkage
The 930H uses an Integrated Tool Carrier-based VersaLink linkage that gives simultaneous tilt, lift and auxiliary hydraulic control of the work tool. A High Lift VersaLink option adds reach and dump height for applications needing extra clearance, at some tradeoff in rated operating load versus the standard linkage.
Coupler and pin-on mounting
Work tools mount either through a cab-switch-actuated hydraulic quick coupler for fast tool changes, or pin-on for a dedicated bucket setup with maximum breakout force, tipping load and dump height. Both mounting styles are offered on standard and High Lift VersaLink configurations.
Auxiliary/third-function hydraulics
A continuous-flow third-function hydraulic circuit is available for tools needing a function beyond tilt/lift, such as grapples or rotating brooms; optional fourth and sixth valve circuits extend control for multi-function tools. Machines not pre-plumbed from the factory need a hydraulic kit installed before these tools can be fitted.
Ride control
An accumulator-based ride control system is offered to dampen bucket/fork load pitching when traveling loaded over rough ground, improving material retention and ride comfort. It runs on its own accumulator and valve circuit, separate from the work-tool hydraulics.
Dozing, snow and site-maintenance tools
For this size class Cat also lists dozer blades, snow plows, hydraulic brooms, an asphalt cutter and loader rakes as work tools, alongside buckets and forks. Availability of these tools varies by region and dealer.
Waste/recycling configuration and guarding
The 930H is offered in a Waste Handler configuration for scrap and recycling work, paired with grapple-type attachments rated for bulkier, lower-density loads than a standard bucket. An optional guarding package protects the cooling package, glass and underside components for harsh-debris applications.
All 930H assemblies by section
Every catalogued assembly group for the Caterpillar 930H. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
289-3740 Air Cleaner Gp
| 22***52 | Bracket-Mounting | 1 |
| 22***20 | Filter Element As-Air; (Primary) | 1 |
| 22***21 | Filter Element As-Air; (Secondary) | 1 |
289-3322 Air Cleaner Gp
| 16***87 | Cap-Air Cleaner | 1 |
| 18***68 | Indicator As-Air Filter Change | 1 |
| 20***27 | Bracket | 1 |
314-6480 Air Cleaner Gp
| 22***63 | Valve As-Air | 1 |
| 25***02 | Filter Element As-Air; (Primary) | 1 |
| 25***03 | Filter Element As-Air; (Secondary) | 1 |
311-2236 Extension Gp-Exhaust
| 30***95 | Tube As | 1 |
| 31***36 | Extension Group-Exhaust | 1 |
| 31***37 | Support As | 1 |
289-3533 Lines Gp-Air
| 10***51 | Hose | 1 |
| 14***67 | Clamp; (Hose) | 2 |
| 15***29 | Hose | 1 |
288-7985 Manifold Gp-Inlet
| 23***88 | Gasket-Inlet | 1 |
| 27***02 | Dowel | 2 |
| 27***28 | Gasket-Manifold | 1 |
289-3232 Muffler Gp
| 28***24 | Adapter | 1 |
| 28***32 | Muffler Group | 1 |
| 28***33 | Muffler As | 1 |
121-7746 Precleaner Gp
| 12***46 | Precleaner Group | 1 |
| 13***43 | Clamp-Hose | 1 |
| 1M***50 | Bowl | 1 |
331-8936 Turbocharger Gp
| 03***47 | Ferrule | 3 |
| 03***14 | Nut; (7/16-In) | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 2 |
Basic Engine
292-5867 Camshaft Gp
| 1B***36 | Key-Woodruff | 1 |
| 27***25 | Tappet | 12 |
| 27***26 | Rod-Push | 12 |
330-6501 Cover Gp-Engine
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 32***54 | Plate As | 1 |
277-4224 Cover Gp-Engine -Auxiliary Drive
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 27***23 | Plug | 1 |
320-6564 Cover Gp-Valve Mechanism
| 10***41 | Bolt; (M6x1x10-mm) | 5 |
| 10***95 | Bolt; (M8x1.25x35-mm) | 2 |
| 20***02 | Clamp-Hose | 1 |
292-5859 Crankshaft Gp
| 1B***36 | Key-Woodruff | 1 |
| 22***39 | Dowel | 1 |
| 27***87 | Crankshaft Kt | 1 |
306-6845 Cylinder Block Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 5 |
| 10***41 | Bolt; (M6x1x10-mm) | 6 |
| 18***84 | Dowel | 2 |
292-5856 Cylinder Block Gp
| 20***19 | Bolt; (M8x1.25x16-mm) | 8 |
| 29***86 | Housing-Rear | 1 |
| 29***56 | Cylinder Block Group | 1 |
309-6663 Cylinder Head As
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 27***16 | Plug-Core | 6 |
276-8115 Cylinder Head As
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 27***15 | Cylinder Head As | 1 |
292-5860 Cylinder Head Gp
| 17***41 | Head-Gasket | 1 |
| 27***34 | Bolt-Special; (Cylinder Head) | 14 |
| 29***60 | Cylinder Head Group | 1 |
291-2513 Drain Gp-Engine Oil
| 27***83 | Seal; (Sump Drain Plug) | 1 |
| 29***13 | Drain Group-Engine Oil | 1 |
| 7C***51 | Plug-Drain; (Engine Oil) | 1 |
257-6549 Drain Gp-Engine Oil
| 15***70 | Cap-Dust; (Engine Coolant) | 1 |
| 15***55 | Adapter | 1 |
| 20***23 | Saddle | 1 |
291-2515 Drive Gp-Fan
| 11***59 | Bolt; (M10x1.5x35-mm) | 4 |
| 28***26 | Pulley | 1 |
| 28***36 | Housing As | 1 |
286-7834 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 11***43 | Flywheel As | 1 |
| 28***34 | Flywheel Group | 1 |
281-6332 Housing Gp-Flywheel
| 10***57 | Plate | 1 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 19***08 | Plug | 1 |
277-3014 Housing Gp-Front
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
279-9653 Lifting Gp-Engine
| 27***51 | Plate-Lifting | 1 |
| 27***52 | Plate-Lifting | 1 |
| 27***53 | Lifting Group-Engine | 1 |
290-0637 Mounting Gp-Engine & Xmsn
| 03***57 | Washer; (13x26x6-mm Thk) | 10 |
| 22***41 | Mount As | 2 |
| 29***37 | Mounting Group-Engine & Xmsn | 1 |
289-3268 Pan Gp-Oil
| 10***90 | Plug | 1 |
| 25***36 | Tube As | 1 |
| 27***83 | Seal; (Sump Drain Plug) | 2 |
292-5857 Piston & Rod Gp
| 12***36 | Ring-Retaining | 2 |
| 22***39 | Bolt-Special; (Connecting Rod) | 2 |
| 27***75 | Piston As | 6 |
277-5007 Plug Gp-Engine
| 27***07 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
299-3949 Plug Gp-Flywheel Housing
| 21***81 | Seal-O-Ring | 1 |
| 25***74 | Plug As | 6 |
| 29***49 | Plug Group-Flywheel Housing | 1 |
274-1929 Pulley Gp-Crankshaft
| 27***29 | Pulley Group-Crankshaft | 1 |
| 27***30 | Damper | 1 |
| 27***31 | Pulley | 1 |
292-5865 Rocker Arm Gp
| 28***11 | Rocker Arm Group | 1 |
| 29***65 | Rocker Arm Group | 1 |
| 33***97 | Link | 12 |
280-1911 Rocker Arm Gp
| 27***00 | Plug-Shaft End | 1 |
| 27***01 | Circlip | 1 |
| 27***06 | Spring-Shaft | 5 |
Braking System
140-9251 Accumulator Gp-Brake -Charged-Brake
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
283-9971 Brake Gp
| 1V***72 | Spring-Extension | 1 |
| 21***68 | Plate As | 1 |
| 28***71 | Brake Group | 1 |
214-4769 Brake Gp-Parking
| 11***50 | Shoe As-Lined | 2 |
| 1V***72 | Spring-Extension | 1 |
| 21***68 | Plate As | 1 |
323-4078 Control Gp-Parking Brake
| 16***08 | Bracket Assem. | 1 |
| 18***15 | Clevis | 1 |
| 2N***77 | Screw-Machine; (6-32x1.25-In) | 2 |
168-7000 Control Gp-Parking Brake -Handle
| 16***08 | Bracket Assem. | 1 |
| 16***12 | Lever Assem. | 1 |
| 16***00 | Control Group-Parking Brake; -Handle | 1 |
294-9448 Control Gp-Parking Brake
| 14***93 | Cable As-Parking Brake Control | 1 |
| 29***40 | Plate As | 1 |
| 29***41 | Plate | 1 |
289-8930 Control Gp-Parking Brake
| 14***93 | Cable As-Parking Brake Control | 1 |
| 28***30 | Control Group-Parking Brake | 1 |
| 29***40 | Plate As | 1 |
202-0430 Control Gp-Service Brake
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***98 | Boot | 1 |
| 11***99 | Kit-Seal; (Brake Valve)(Service Brake Valve) | 1 |
289-8816 Lines Gp-Service Brake
| 11***40 | Spacer; (13.1x15.9x36.5-mm Thk)(36.5mm Thk) | 4 |
| 14***51 | Accumulator Group-Brake; -Charged-Brake | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
289-8926 Lines Gp-Service Brake
| 10***21 | Hose Assem. | 1 |
| 11***40 | Spacer; (13.1x15.9x36.5-mm Thk)(36.5mm Thk) | 4 |
| 12***64 | Hose As | 1 |
289-8927 Lines Gp-Service Brake
| 11***40 | Spacer; (13.1x15.9x36.5-mm Thk)(36.5mm Thk) | 4 |
| 14***51 | Accumulator Group-Brake; -Charged-Brake | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
Cooling System
281-8748 Connection Gp-Water
| 10***87 | Bolt; (M10x1.5x85-mm) | 1 |
| 12***99 | Bolt; (M10x1.5x40-mm) | 1 |
| 28***44 | Gasket-Water Regulator; (Temperature) | 1 |
326-7401 Cooler Gp-Engine Oil
| 27***00 | Gasket-Housing | 1 |
| 28***39 | Cooler-Oil; (Engine) | 1 |
| 28***40 | Gasket | 1 |
330-4724 Cooler Gp-Fltr Base & Eng Oil
| 19***52 | Seal-O-Ring | 1 |
| 22***44 | Gasket; (Engine Oil Filter Base) | 3 |
| 23***51 | Plate; (Blanking) | 2 |
283-4558 Cooler Gp-Fltr Base & Eng Oil
| 22***44 | Gasket; (Engine Oil Filter Base) | 3 |
| 23***51 | Plate; (Blanking) | 2 |
| 27***00 | Gasket-Housing | 1 |
185-1045 Fan Gp-Suction
| 18***45 | Fan Group-Suction | 1 |
| 18***46 | Spider As-Fan; (9-Blade) | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
290-6407 Lines Gp-Water -Without Axle Oil Cooler
| 18***23 | Hose-Radiator; (Radiator Upper Inlet) | 1 |
| 29***03 | Hose-Radiator; (Radiator Lower Inlet) | 1 |
| 29***04 | Hose-Radiator; (Lower Inlet) | 1 |
290-6406 Lines Gp-Water -With Axle Oil Cooler
| 18***23 | Hose-Radiator; (Radiator Upper Inlet) | 1 |
| 18***30 | Hose; (Brake, Axle Cooler Inlet) | 1 |
| 29***03 | Hose-Radiator; (Radiator Lower Inlet) | 1 |
277-2939 Pump Gp-Water
| 11***29 | Bolt; (M8x1.25x75-mm) | 7 |
| 22***38 | Seal-O-Ring | 1 |
| 22***19 | Gasket | 1 |
289-9075 Radiator & Aftercooler Gp
| 05***89 | Grommet | 1 |
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 6 |
| 12***65 | Rivet-Pop | 6 |
185-1016 Radiator Gp
| 18***16 | Radiator Group | 1 |
| 18***27 | Bracket As | 4 |
| 22***87 | Valve Group-Radiator Drain | 1 |
238-6658 Radiator Gp -Waste Handler
| 18***27 | Bracket As | 4 |
| 22***87 | Valve Group-Radiator Drain | 1 |
| 23***58 | Radiator Group; -Waste Handler | 1 |
239-7396 Radiator Gp
| 18***16 | Radiator Group | 1 |
| 23***96 | Radiator Group | 1 |
| 9X***82 | Setscrew-Socket; (M12x1.75x70-mm) | 2 |
239-7397 Radiator Gp -Waste Handler
| 23***58 | Radiator Group; -Waste Handler | 1 |
| 23***97 | Radiator Group; -Waste Handler | 1 |
| 9X***82 | Setscrew-Socket; (M12x1.75x70-mm) | 2 |
Electrical And Starting System
3e-6328 Alarm Gp -Action
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
259-4137 Alternator Gp-Charging -24-Volt, 95-Ampere
| 12***96 | Pulley-Alternator | 1 |
| 19***42 | Belt Tensioner; (Air Compressor) | 1 |
| 19***20 | Alternator Group-Charging; -24-Volt, 95-Ampere | 1 |
197-8820 Alternator Gp-Charging -24-Volt, 95-Ampere
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***44 | Coil Assem. | 1 |
267-3770 Alternator Gp-Charging -24-Volt, 95-Ampere
| 12***96 | Pulley-Alternator | 1 |
| 19***43 | Belt Tensioner | 1 |
| 19***20 | Alternator Group-Charging; -24-Volt, 95-Ampere | 1 |
290-7203 Battery & Wiring Gp
| 10***76 | Hold-Down-Battery | 2 |
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
| 15***41 | Block | 1 |
302-1885 Battery & Wiring Gp -Secondary Steering
| 10***76 | Hold-Down-Battery | 2 |
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
| 15***41 | Block | 1 |
132-2685 Battery Gp
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
| 13***85 | Battery Group | 1 |
302-8662 Camera Ar
294-9444 Camera Ar -Work Area Visual System
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***21 | Bracket Assem. (L.H.) | 1 |
| 12***22 | Bracket Assem. (R.H.) | 1 |
290-7190 Camera Ar -Work Area Visual System
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***15 | Bolt-Hex Head; (M6x1x20mm) | 2 |
| 18***17 | Washer-Hard; (7x19x2-mm Thk) | 2 |
3e-7843 Control Gp-Position -Work Tool
3e-7844 Control Gp-Lift Kickout
321-0549 Conversion Ar-Lighting -Rear
207-5947 Converter Gp-Electrical
289-8802 Electronics Ar-Machine
322-6842 Electronics Gp-Power Train -Machine Control
277-4410 Glow Plug Gp
293-4052 Heater Gp-Jacket Water
293-4050 Heater Gp-Jacket Water
326-7439 Installation Gp-Communication -Product Link 321sr
326-7438 Installation Gp-Security
243-0516 Installation Gp-Security
319-7382 Lamp Gp-Flood -Hid
302-0406 Lamp Gp-Flood -Rh
234-4325 Lamp Gp-Flood
302-0408 Lamp Gp-Flood -Lh
273-3572 Lamp Gp-Rear -Combination, Lh
273-3573 Lamp Gp-Rear -Combination, Rh
145-6929 Lamp Gp-Stop & Tail
108-1029 Lamp Gp-Warning Beacon -Amber
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 9R***42 | Plug As | 1 |
140-3668 Lamp Gp-Warning Beacon -Amber, Strobe
| 14***68 | Lamp Group-Warning Beacon; -Amber, Strobe | 1 |
| 9R***42 | Plug As | 1 |
115-1558 Lighting Gp-Auxiliary -Cab Front
| 11***58 | Lighting Group-Auxiliary; -2-Lamp, Cab, Front | 1 |
| 11***59 | Plate | 2 |
| 23***25 | Lamp Group-Flood; -Suspended Mount | 2 |
312-4917 Lighting Gp-Auxiliary
| 23***62 | Wire As | 2 |
| 30***10 | Bracket; (Rh) | 1 |
| 30***11 | Bracket; (Lh) | 1 |
313-4572 Lighting Gp-Flood -Canopy Front, Rear
| 10***41 | Lamp Group-Flood; (24-Volt) | 4 |
| 11***04 | Nut; (Speed) | 16 |
| 14***89 | Screw; (M6.5x40-mm) | 4 |
290-8181 Lighting Gp-Flood -Cab Front, Rear
| 10***41 | Lamp Group-Flood; (24-Volt) | 4 |
| 10***81 | Cable As-Coaxial | 1 |
| 11***04 | Nut; (Speed) | 16 |
290-7223 Lighting Gp-Flood & Signal
| 13***35 | Lever | 1 |
| 13***69 | Switch As-Turn Signal | 1 |
| 14***29 | Lamp Group-Stop & Tail | 2 |
290-7222 Lighting Gp-Roading
| 13***35 | Lever | 1 |
| 13***69 | Switch As-Turn Signal | 1 |
| 14***29 | Lamp Group-Stop & Tail | 2 |
218-8836 Lighting Gp-Warning Beacon
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***36 | Plate | 1 |
289-8906 Lighting Gp-Warning Beacon
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***36 | Plate | 1 |
| 14***68 | Lamp Group-Warning Beacon; -Amber, Strobe | 1 |
324-9712 Module As-Fuse -Glow Plugs, Start Solenoid
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 26***11 | Seal | 1 |
| 26***13 | Cover | 1 |
309-1620 Module As-Fuse -Main Power
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 26***80 | Fuse; (20-Ampere)(Main) | 1 |
| 27***72 | Fuse; (30-Ampere)(Main) | 1 |
117-3915 Motor Gp-Electric -Secondary Steering
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
| 7X***08 | Washer-Hard; (10.2x16x2-mm Thk) | 2 |
256-7265 Mounting Gp-Camera -Work Area Visual System
| 18***15 | Bolt-Hex Head; (M6x1x20mm) | 2 |
| 18***17 | Washer-Hard; (7x19x2-mm Thk) | 2 |
| 25***65 | Mounting Group-Camera; -Work Area Visual System | 1 |
266-1467 Sensor Gp-Position -Rotary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 26***67 | Sensor Group-Position; -Brake Pedal | 1 |
224-4536 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***27 | Harness As-Sensor; (14-Ga Wire)(Engine Oil Temperature) | 3 |
196-1185 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***49 | Strap; (Marker) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
183-8597 Sensor Gp-Speed -Transmission Output
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***49 | Strap; (Marker) | 1 |
| 18***97 | Sensor Group-Speed; -Transmission Output | 1 |
134-2252 Sensor Gp-Temperature
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***52 | Sensor Group-Temperature; -Transmission Oil-Xmsn, Torque Converter | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
130-9811 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 1 |
290-4432 Starting Aid Gp-Ether
| 29***32 | Starting Aid Group-Ether | 1 |
| 29***81 | Starting Aid Group-Ether | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 4 |
290-8781 Starting Aid Gp-Ether
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
| 23***13 | Bracket | 1 |
| 23***34 | Valve Group-Ether Starting | 1 |
234-2667 Starting Motor Gp-Electric
| 23***37 | Starting Motor Group-Electric | 1 |
| 23***67 | Starting Motor Group-Electric | 1 |
| 7W***40 | Spacer-Starting Motor | 1 |
234-2637 Starting Motor Gp-Electric
| 10***85 | Cap-Starting Motor | 1 |
| 23***37 | Starting Motor Group-Electric | 1 |
| 24***41 | Drive As-Starting Motor | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
290-7197 Switch Gp-Differential Lock
| 20***59 | Boot | 1 |
| 20***75 | Switch As-Foot; (Differential Lock On, Off) | 1 |
| 20***98 | Actuator; (Differential Lock Control) | 1 |
179-0006 Switch Gp-Magnetic -Secondary Steering Relay
| 17***06 | Switch Group-Magnetic; -Hydraulic Tank Fill Pump/Motor Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
241-8368 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
326-4109 Switch Gp-Rocker -Warning Beacon
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***36 | Plate | 1 |
| 19***25 | Switch As-Rocker; (Warning Beacon) | 1 |
165-5970 Switch Gp-Toggle -Fuel Priming Pump On, Off
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
107-6133 Switch Gp-Wiper -Intermittent
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***33 | Switch Group-Wiper; -Intermittent | 1 |
| 11***74 | Wiper And Washer Switch Assembly; (Wiper, Washer)(Wiper, Washer, Rear) | 1 |
275-7741 Switch Gp-Wiper -Intermittent
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 27***41 | Switch Group-Wiper; -Intermittent-Front, Rear | 1 |
239-1134 Valve Gp-Ether Starting
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***34 | Valve Group-Ether Starting | 1 |
180-8807 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***07 | Warning Group-Backup | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
289-8903 Wiring Gp-Cab -Enclosed Rops
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
289-8904 Wiring Gp-Cab -Open Rops
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
256-7269 Wiring Gp-Camera -Rear Chassis
| 25***60 | Camera Group; (115-Deg, Color)(Rear View) | 1 |
| 25***48 | Cable As-Communication; (Camera) | 2 |
| 25***69 | Wiring Group-Camera; -Rear Chassis | 1 |
299-3953 Wiring Gp-Electronic Control -Engine
| 21***39 | Strap-Cable | 3 |
| 26***42 | Harness As-Engine; (Engine Control Module) | 1 |
| 27***09 | Bracket | 1 |
289-8902 Wiring Gp-Engine -Tier Iii, High Power
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***61 | Cap-Connector | 1 |
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
289-8958 Wiring Gp-Front
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
289-8957 Wiring Gp-Front
| 16***01 | Horn As; (24-Volt, Low Tone) | 1 |
| 19***21 | Spacer; (10.1x15.9x70-mm Thk) | 4 |
| 19***11 | Plate As | 1 |
289-8959 Wiring Gp-Rear
| 13***89 | Clip; (Ladder) | 3 |
| 1M***43 | Grommet | 1 |
| 20***45 | Strap-Cable | 2 |
290-7189 Wiring Gp-Ride Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
312-8309 Wiring Gp-Ride Control
| 12***32 | Harness As-Ride Control | 1 |
| 15***89 | Relay As; (24-Volt)(Ride Control, Load Check Relay) | 1 |
| 18***58 | Suppressor-Arc | 1 |
215-2890 Wiring Gp-Ride Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
290-7219 Wiring Gp-Secondary Steering
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***97 | Diode As; (Bipolar) | 1 |
290-7220 Wiring Gp-Secondary Steering -Secondary Steering
| 11***97 | Diode As; (Bipolar) | 1 |
| 15***89 | Relay As; (24-Volt)(Ride Control, Load Check Relay) | 1 |
| 17***93 | Ring-Terminal | 2 |
Engine Arrangement
292-5305 Engine Ar-Primary
| 27***29 | Pulley Group-Crankshaft | 1 |
| 27***73 | Filler Group-Engine Oil | 1 |
| 27***12 | Filter Group-Engine Oil; -Engine | 1 |
289-8894 Installation Ar-Engine
| 18***45 | Fan Group-Suction | 1 |
| 23***67 | Starting Motor Group-Electric | 1 |
| 25***49 | Drain Group-Engine Oil | 1 |
Frame And Body
202-0420 Box Gp-Battery
| 17***35 | Box As | 2 |
| 20***20 | Box Group-Battery | 1 |
| 23***20 | Cover | 2 |
257-1604 Counterweight Gp
| 18***92 | Counterweight As; (Rh) | 1 |
| 18***93 | Counterweight As; (Lh) | 1 |
| 19***15 | Plug; (Protection) | 1 |
257-1628 Counterweight Gp
| 12***97 | Bolt; (M24x3x315-mm) | 4 |
| 18***96 | Counterweight As; (Rh) | 1 |
| 18***97 | Counterweight As; (Lh) | 1 |
257-1627 Counterweight Gp
| 18***94 | Counterweight; (Rh) | 1 |
| 18***96 | Counterweight As; (Rh) | 1 |
| 18***97 | Counterweight As; (Lh) | 1 |
257-1626 Counterweight Gp
| 12***97 | Bolt; (M24x3x315-mm) | 4 |
| 18***92 | Counterweight As; (Rh) | 1 |
| 18***93 | Counterweight As; (Lh) | 1 |
180-8984 Counterweight Gp
| 18***84 | Counterweight Group | 1 |
| 18***96 | Counterweight As; (Rh) | 1 |
| 18***97 | Counterweight As; (Lh) | 1 |
301-4353 Cover Gp-Access -Cab Floor
| 30***53 | Cover Group-Access; -Cab Floor | 1 |
| 30***54 | Male Connector, Plate | 1 |
| 30***55 | Tread | 1 |
235-6955 Fender Ar-Roading -Heavy-Duty
| 20***83 | Fender Group-Rear; -Roading | 1 |
| 22***86 | Fender Group-Front | 1 |
| 23***55 | Fender Ar-Roading; -Heavy-Duty | 1 |
226-1186 Fender Gp-Front
| 22***39 | Plate As | 2 |
| 22***40 | Bracket As | 2 |
| 22***45 | Fender As | 2 |
208-4985 Fender Gp-Front
| 13***84 | Bracket As; (Lh) | 1 |
| 13***85 | Bracket As; (Rh) | 1 |
| 20***13 | Bolt; (M6x1.0x40mm) | 8 |
140-9295 Fender Gp-Front
| 14***95 | Fender Group-Front; -Roading | 1 |
| 14***96 | Bracket As | 2 |
| 20***13 | Bolt; (M6x1.0x40mm) | 8 |
215-2646 Fender Gp-Rear -Roading, Rh
| 00***01 | Ring-Retaining | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 3 |
208-4983 Fender Gp-Roading -Rear
| 14***85 | Pivot As | 2 |
| 16***47 | Guide | 2 |
| 16***48 | Cover | 2 |
215-2645 Fender Gp-Rear -Roading, Lh
| 00***01 | Ring-Retaining | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 3 |
208-0310 Fender Gp-Roading
| 14***95 | Fender Group-Front; -Roading | 1 |
| 20***10 | Fender Group-Roading | 1 |
| 20***83 | Fender Group-Rear; -Roading | 1 |
113-3785 Frame Gp-Loader
| 11***85 | Frame Group-Loader | 1 |
| 11***00 | Frame As-Loader | 1 |
| 11***55 | Plate | 1 |
235-7200 Frame Gp-Loader
| 23***00 | Frame Group-Loader | 1 |
| 23***01 | Frame Group-Loader | 1 |
| 24***51 | Plate | 1 |
321-7760 Frame Gp-Loader
| 24***51 | Plate | 1 |
| 32***60 | Frame Group-Loader | 1 |
| 32***61 | Frame As | 1 |
235-7201 Frame Gp-Loader
| 09***36 | Boss; (M10x1.5-Thd) | 1 |
| 23***01 | Frame Group-Loader | 1 |
| 4K***09 | Bearing-Sleeve | 2 |
257-1600 Frame Gp-Rear
| 10***96 | Pin-Keeper | 1 |
| 11***85 | Pad As-Resilient | 2 |
| 13***58 | Pin As | 1 |
257-1621 Frame Gp-Rear
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 4 |
| 12***54 | Block | 2 |
257-1620 Frame Gp-Rear
257-1601 Frame Gp-Rear
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 4 |
| 12***54 | Block | 2 |
294-9493 Guard Gp-Axle Seal
| 23***42 | Plate As | 4 |
| 23***07 | Bolt; (M24x3x100-mm) | 8 |
| 29***93 | Guard Group-Axle Seal | 1 |
293-5221 Guard Gp-Crankcase
| 21***18 | Plate As | 1 |
| 29***21 | Guard Group-Crankcase | 1 |
| 29***22 | Plate As | 1 |
239-0717 Guard Gp-Drive Shaft
| 22***81 | Plate As | 1 |
| 22***89 | Bracket As | 2 |
| 22***41 | Plate As | 1 |
290-7213 Guard Gp-Drive Shaft
| 29***13 | Guard Group-Drive Shaft | 1 |
| 29***80 | Guard As | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
300-1962 Guard Gp-Lighting
| 30***62 | Guard Group-Lighting | 1 |
| 31***17 | Bracket, . Bracket, Exhaust Gas Recirculation Valve Gasket, Guard As | 2 |
| 3E***00 | Seal; (13.5-cm Each) | 0 |
235-6879 Guard Gp-Lines -Tilt
| 16***48 | Sleeve-Abrasion | 0 |
| 23***79 | Guard Group-Lines; -Tilt | 1 |
| 6K***06 | Strap-Cable -Lines From Rotate Valve | 8 |
235-6877 Guard Gp-Lines -Third Function
| 16***48 | Sleeve-Abrasion | 0 |
| 23***77 | Guard Group-Lines; -Third Function | 1 |
| 6K***06 | Strap-Cable -Lines From Rotate Valve | 8 |
118-1121 Guard Gp-Lines -Tilt
| 11***21 | Guard Group-Lines; -Tilt | 1 |
| 12***68 | Guard-Hose | 2 |
| 6V***45 | Grommet | 2 |
235-6880 Guard Gp-Lines -Coupler
| 16***43 | Sleeve-Abrasion; (37.01-In Each) | 0 |
| 23***80 | Guard Group-Lines; -Coupler | 1 |
| 6K***06 | Strap-Cable -Lines From Rotate Valve | 8 |
128-0298 Guard Gp-Lines -Third Function
| 12***98 | Guard Group-Lines; -Third Function | 1 |
| 16***48 | Sleeve-Abrasion | 0 |
| 5P***68 | Clip (Slot-For Use On 52 mm Od Tube) | 2 |
294-0507 Guard Gp-Power Train -Transmission
| 21***40 | Plate | 1 |
| 29***06 | Plate As | 1 |
| 29***07 | Guard Group-Power Train; -Transmission | 1 |
290-4074 Guard Gp-Radiator
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 14***12 | Hinge As | 2 |
| 21***20 | Plate As | 2 |
209-8712 Guard Gp-Radiator -Waste Handler
| 20***12 | Guard Group-Radiator; -Waste Handler | 1 |
| 20***13 | Guard As | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
113-3790 Hitch Gp-Articulating
| 11***28 | Shim | 1 |
| 11***90 | Hitch Group-Articulating | 1 |
| 11***91 | Pin As | 1 |
289-8912 Hood & Guard Gp
| 12***86 | Lock As-Cylinder | 1 |
| 13***16 | Stud-Ball | 4 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
289-8913 Ladder Gp
| 13***14 | Step As; (Lh) | 1 |
| 13***15 | Step As; (Rh) | 1 |
| 15***06 | Plate | 8 |
204-5107 Lines Gp-Grease
| 20***07 | Lines Group-Grease | 1 |
| 3B***52 | Elbow; --Cross To Hose Assembly To Air Gauge | 3 |
| 3B***34 | Nipple-Pipe | 1 |
289-8977 Lines Gp-Grease
| 00***39 | Adapter-Pipe | 1 |
| 16***43 | Sleeve-Abrasion; (37.01-In Each) | 0 |
| 24***36 | Hose As | 1 |
7v-2885 Link Gp-Steering Frame Lock
| 5P***37 | Pin (Lock) | 2 |
| 5V***98 | Link | 1 |
| 5V***99 | Pin | 2 |
113-3783 Link Gp-Steering Frame Lock
| 11***83 | Link Group-Steering Frame Lock | 1 |
| 11***84 | Link | 1 |
| 5P***37 | Pin (Lock) | 2 |
290-7202 Mounting Gp-Bracket -Grease Gun
| 1U***84 | Holder As; (Grease Gun) | 2 |
| 29***02 | Mounting Group-Bracket; -Grease Gun | 1 |
198-8964 Panel Gp-Access -Hood, Cab Heater
| 17***91 | Nut-Spring | 10 |
| 19***88 | Plate | 1 |
| 19***57 | Plate | 1 |
198-8965 Panel Gp-Top -Hood, Air Conditioner
| 17***91 | Nut-Spring | 10 |
| 18***17 | Washer-Hard; (7x19x2-mm Thk) | 2 |
| 19***65 | Panel Group-Top; -Hood, Air Conditioner | 1 |
Fuel System
280-1394 Filter Gp-Secondary Fuel
| 28***94 | Filter Group-Secondary Fuel | 1 |
| 29***29 | Filter-Fuel; (Ultra High Efficiency)(Secondary) | 1 |
| 30***80 | .. Bushing, Filter Group-Fuel; (Ultra High Efficiency) | 1 |
174-9570 Filter Gp-Water Sep & Fuel -Primary
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
306-9390 Injector Gp-Fuel
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
| 30***90 | Injector Group-Fuel | 1 |
292-3790 Injector Gp-Fuel
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
| 29***90 | Injector Group-Fuel | 1 |
320-0690 Injector Gp-Fuel
| 27***39 | Seal | 1 |
| 28***37 | Washer | 1 |
| 32***90 | Injector Group-Fuel | 1 |
308-9075 Lines Gp-Fuel
| 10***16 | Bolt; (M6x16-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
289-8938 Lines Gp-Fuel
| 16***19 | Plug As | 2 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
| 18***47 | Adapter | 1 |
304-0292 Pump Gp-Fuel Injection
| 10***95 | Bolt; (M8x1.25x35-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 15***76 | Mount-Isolation | 8 |
317-8021 Pump Gp-Fuel Injection
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***72 | Fitting-Fuel | 1 |
| 22***00 | Seal-O-Ring | 2 |
276-8398 Pump Gp-Fuel Injection
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***00 | Seal-O-Ring | 1 |
| 23***20 | Sensor Group-Speed; (Secondary, Timing) | 1 |
212-3657 Pump Gp-Fuel Prm & Water Sep -Electric
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 17***00 | Seal; (Fuel) | 2 |
| 21***57 | Pump Group-Fuel Prm & Water Sep; -Electric-Primary Filter | 1 |
289-8911 Tank & Mtg Gp-Fuel
| 18***86 | Bolt; (M10x1.5x60-mm) | 2 |
| 20***58 | Strap | 1 |
| 20***60 | Strap As | 2 |
290-3931 Tank Gp-Fuel
| 18***30 | Strainer-Fuel; (Filler Neck Screen) | 1 |
| 20***41 | Adapter-Fuel Cap; (Fuel Cap) | 1 |
| 29***31 | Tank Group-Fuel | 1 |
Hydraulic System
243-4398 Accumulator Gp-Pilot Oil -Charged
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 22***32 | Cap; (Gas Valve) | 1 |
| 22***52 | Valve-Gas; (Brake Accumulator) | 1 |
250-0393 Accumulator Gp-Pilot Oil -Uncharged
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 22***32 | Cap; (Gas Valve) | 1 |
| 22***52 | Valve-Gas; (Brake Accumulator) | 1 |
283-4418 Accumulator Gp-Ride Control -Charged
| 16***96 | Service Kit; (Includes Seals) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 22***32 | Cap; (Gas Valve) | 1 |
223-9698 Accumulator Gp-Ride Control -Charged
| 06***35 | Valve-Gas | 1 |
| 17***93 | Kit-Seal; (Hydraulic Accumulator) | 1 |
| 17***03 | Film-Warning; (Accum, High Press, Read Omm)(Plate-Name) | 1 |
298-2412 Accumulator Gp-Ride Control -Charged
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 22***32 | Cap; (Gas Valve) | 1 |
| 22***52 | Valve-Gas; (Brake Accumulator) | 1 |
6e-6477 Cartridge Gp-Vane Pump -Implement
| 06***57 | Seal-O-Ring | 1 |
| 11***11 | Seal Assem.; (Includes Parts Marked J) | 4 |
| 3F***92 | Seal-O-Ring | 1 |
289-8996 Control Ar-Ride
| 28***96 | Control Ar-Ride | 1 |
| 29***85 | Lines Group-Ride Control | 1 |
| 29***89 | Wiring Group-Ride Control | 1 |
203-8558 Control Ar-Ride
| 20***58 | Control Ar-Ride | 1 |
| 21***90 | Wiring Group-Ride Control | 1 |
| 21***73 | Lines Group-Ride Control | 1 |
223-9073 Control Ar-Ride
| 20***58 | Control Ar-Ride | 1 |
| 22***73 | Control Ar-Ride | 1 |
290-6481 Control Ar-Ride
| 21***73 | Lines Group-Ride Control | 1 |
| 23***66 | Software-Configuration | 1 |
| 29***81 | Control Ar-Ride | 1 |
287-2051 Valve Gp-Pilot -Joystick, 4-Function
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 11***40 | Rod | 1 |
| 12***01 | Knob; (Auxiliary) | 1 |
287-2053 Valve Gp-Pilot -Joystick, 3-Function
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 21***02 | Valve Group-Pilot; -Joystick, 2-Function | 1 |
| 25***59 | Plate | 1 |
293-6472 Control Gp-Ride
| 14***07 | Adapter As | 1 |
| 28***78 | Valve Group-Ride Control | 1 |
| 28***18 | Accumulator Group-Ride Control; -Charged | 2 |
241-1049 Conversion Ar-Hydraulic -1-Lever, 2-Valve To 2-Lever, 3-Valve
| 11***94 | Lines Group-Front | 1 |
| 13***35 | Valve Group-Main Control; -3-Function | 1 |
| 14***21 | Connector As | 2 |
293-2239 Cooler Gp-Hyd & Tmsn Oil
| 12***65 | Rivet-Pop | 32 |
| 25***41 | Core As-Power Train Oil Cooler | 1 |
| 29***39 | Cooler Group-Hydraulic & Tmsn Oil | 1 |
293-2240 Cooler Gp-Hydraulic Oil
| 29***40 | Cooler Group-Hydraulic Oil | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 6V***40 | Connector - Orfs | 1 |
148-7827 Cylinder & Mtg Gp-Coupler
| 14***27 | Cylinder & Mtg Group-Coupler | 1 |
| 19***85 | Cylinder Group-Coupler | 1 |
| 6W***60 | Dowel | 2 |
196-1979 Cylinder & Mtg Gp-Coupler
| 19***85 | Cylinder Group-Coupler | 1 |
| 19***79 | Cylinder & Mtg Group-Coupler | 1 |
| 6W***60 | Dowel | 2 |
237-0946 Cylinder Gp-Coupler
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
| 1S***70 | Packing,Preformed Plate Part Of | 1 |
| 21***33 | Kit-Seal; (Quick Coupler) | 1 |
190-3085 Cylinder Gp-Coupler
| 17***93 | Rod | 2 |
| 18***72 | Kit-Seal; (Coupler Cylinder) | 1 |
| 19***85 | Cylinder Group-Coupler | 1 |
235-6823 Cylinder Gp-Lift
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
| 16***69 | Piston | 1 |
119-1060 Cylinder Gp-Lift
| 10***17 | Washer; (36.7x77x6-mm Thk) | 1 |
| 11***60 | Cylinder Group-Lift | 1 |
| 11***62 | Cylinder As | 1 |
268-1322 Cylinder Gp-Multipurpose Bukt
| 26***22 | Cylinder Group-Multipurpose Bukt | 1 |
| 27***50 | Bearing-Sleeve | 2 |
| 27***29 | Kit-Seal | 0 |
118-8105 Cylinder Gp-Tilt
| 11***49 | Lug | 2 |
| 11***05 | Cylinder Group-Tilt | 1 |
| 11***06 | Cylinder As | 1 |
235-6824 Cylinder Gp-Tilt
| 11***49 | Lug | 1 |
| 16***07 | Seal As-Buffer | 1 |
| 16***17 | Seal-U-Cup | 1 |
203-3877 Filter & Mtg Gp-Hydraulic -Oil
| 20***77 | Filter & Mtg Group-Hydraulic; -Hydraulic | 1 |
| 20***49 | Filter Group-Oil; -Hydraulic | 1 |
| 22***39 | Bracket | 1 |
321-2543 Filter & Mtg Gp-Hydraulic -Oil
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***08 | Plug As. | 2 |
| 20***49 | Filter Group-Oil; -Hydraulic | 1 |
209-3149 Filter Gp-Oil -Hydraulic
| 12***18 | Filter-Oil; (Ultra High Efficiency)(Hydraulic) | 1 |
| 15***45 | Elbow | 1 |
| 20***49 | Filter Group-Oil; -Hydraulic | 1 |
242-0092 Hydraulic Ar -3rd Function, Continuous Flow
| 24***92 | Hydraulic Ar; -Third Function, Continuous Flow | 1 |
| 24***93 | Lines Group-Hydraulic; -Third Function, Continuous Flow | 1 |
289-8883 Hydraulic Ar
| 20***77 | Filter & Mtg Group-Hydraulic; -Hydraulic | 1 |
| 23***23 | Cylinder Group-Lift | 2 |
| 23***24 | Cylinder Group-Tilt | 1 |
289-8843 Hydraulic Ar
| 20***77 | Filter & Mtg Group-Hydraulic; -Hydraulic | 1 |
| 23***23 | Cylinder Group-Lift | 2 |
| 23***24 | Cylinder Group-Tilt | 1 |
289-8863 Hydraulic Ar
| 11***52 | Kickout & Positioner Group | 1 |
| 11***61 | Lines Group-Lift Cylinder | 1 |
| 11***62 | Lines Group-Tilt Cylinder | 1 |
202-0421 Hydraulic Ar-2 Valve -1-Lever, With Fnr
| 11***87 | Valve & Mtg Group-Main Control; -2-Function | 1 |
| 18***96 | Control Group-Handle; -Direction, Downshift | 1 |
| 20***21 | Hydraulic Ar-2 Valve; -1-Lever, With Fnr | 1 |
203-5927 Hydraulic Ar-2 Valve -2-Lever
| 11***87 | Valve & Mtg Group-Main Control; -2-Function | 1 |
| 20***24 | Lines Group-Pilot; -2-Valve | 1 |
| 20***27 | Hydraulic Ar-2 Valve; -2-Lever | 1 |
303-2042 Hydraulic Ar-3 Valve -1-Lever, 3rd Function, Proportional Flow, Standard Lift Machines
| 23***16 | Lines Group-Front; -Third Function | 1 |
| 24***43 | Hydraulic Ar-3 Valve; -1-Lever, 3rd Function, Proportional Flow | 1 |
| 30***42 | Shim,1mm Thk, Hydraulic Ar-3 Valve; -1-Lever, 3rd Function, Proportional Flow, Standard Lift Machines | 1 |
241-0943 Hydraulic Ar-3 Valve -1-Lever, 3rd Function, Proportional Flow
| 23***56 | Lines Group-Front; -Third Function, Proportional Flow | 1 |
| 24***43 | Hydraulic Ar-3 Valve; -1-Lever, 3rd Function, Proportional Flow | 1 |
| 26***10 | Control Group-Pilot Operated Hydraulic; -Joystick, 3-Function | 1 |
240-9453 Hydraulic Ar-3 Valve -2-Lever, With Fnr
| 23***56 | Control Group-Pilot Operated Hydraulic; -Joystick, 3-Function | 1 |
| 24***53 | Hydraulic Ar-3 Valve; -2-Lever, With Fnr | 1 |
| 24***58 | Lines Group-Hydraulic; -3, 4, 6-Valve | 1 |
303-2037 Hydraulic Ar-3 Valve -2-Lever, High Lift Machines
| 23***23 | Lines Group-Front; -Third Function | 1 |
| 24***53 | Hydraulic Ar-3 Valve; -2-Lever, With Fnr | 1 |
| 30***37 | Shim, Hydraulic Ar-3 Valve; -3-Valve, 2-Lever, High Lift Machines | 1 |
303-2036 Hydraulic Ar-3 Valve -2-Lever, Standard Lift Machines
| 23***16 | Lines Group-Front; -Third Function | 1 |
| 24***53 | Hydraulic Ar-3 Valve; -2-Lever, With Fnr | 1 |
| 30***36 | Hydraulic Ar-3 Valve; -3-Valve, 2-Lever, Standard Lift Machines, Shim | 1 |
303-2043 Hydraulic Ar-3 Valve -1-Lever, 3rd Function, Proportional Flow, High Lift Machines
| 23***23 | Lines Group-Front; -Third Function | 1 |
| 24***43 | Hydraulic Ar-3 Valve; -1-Lever, 3rd Function, Proportional Flow | 1 |
| 30***43 | Shim,2mm Thk, Hydraulic Ar-3 Valve; -1-Lever, 3rd Function, Proportional Flow, High Lift Machines | 1 |
202-0423 Hydraulic Ar-3 Valve -2-Lever, With Fnr
| 11***94 | Lines Group-Front | 1 |
| 11***95 | Valve & Mtg Group-Main Control; -3-Function | 1 |
| 18***96 | Control Group-Handle; -Direction, Downshift | 1 |
303-2038 Hydraulic Ar-4 Valve -3-Lever, Standard Lift Machines
| 23***16 | Lines Group-Front; -Third Function | 1 |
| 23***17 | Lines Group-Front; -Fourth Function | 1 |
| 24***54 | Hydraulic Ar-4 Valve; -3-Lever, With Fnr | 1 |
241-0944 Hydraulic Ar-4 Valve -2-Lever, 3rd Function, Proportional Flow
| 23***56 | Lines Group-Front; -Third Function, Proportional Flow | 1 |
| 24***44 | Hydraulic Ar-4 Valve; -2-Lever, 3rd Function, Proportional Flow | 1 |
| 24***61 | Lines Group-Hydraulic; -4, 6-Valve | 1 |
303-2045 Hydraulic Ar-4 Valve -2-Lever, 3rd Function, Proportional Flow, High Lift Machines
| 23***23 | Lines Group-Front; -Third Function | 1 |
| 23***24 | Lines Group-Front; -Fourth Function | 1 |
| 24***44 | Hydraulic Ar-4 Valve; -2-Lever, 3rd Function, Proportional Flow | 1 |
240-9454 Hydraulic Ar-4 Valve -3-Lever, With Fnr
| 18***96 | Control Group-Handle; -Direction, Downshift | 1 |
| 23***60 | Control Group-Pilot Operated Hydraulic; -Joystick, 4-Function | 1 |
| 24***54 | Hydraulic Ar-4 Valve; -3-Lever, With Fnr | 1 |
303-2039 Hydraulic Ar-4 Valve -3-Lever, High Lift Machines
| 23***23 | Lines Group-Front; -Third Function | 1 |
| 23***24 | Lines Group-Front; -Fourth Function | 1 |
| 24***54 | Hydraulic Ar-4 Valve; -3-Lever, With Fnr | 1 |
303-2044 Hydraulic Ar-4 Valve -2-Lever, 3rd Function, Proportional Flow, Standard Lift Machines
| 23***16 | Lines Group-Front; -Third Function | 1 |
| 23***17 | Lines Group-Front; -Fourth Function | 1 |
| 24***44 | Hydraulic Ar-4 Valve; -2-Lever, 3rd Function, Proportional Flow | 1 |
303-2040 Hydraulic Ar-6 Valve -2-Lever, With Fnr, Standard Lift Machines
| 23***16 | Lines Group-Front; -Third Function | 1 |
| 23***17 | Lines Group-Front; -Fourth Function | 1 |
| 24***00 | Hydraulic Ar-6 Valve; -2-Lever, With Fnr | 1 |
242-0100 Hydraulic Ar-6 Valve -2-Lever, With Fnr
| 24***96 | Control Group-Pilot Operated Hydraulic; -Joystick, 6-Function | 1 |
| 24***98 | Valve & Mtg Group-Main Control; -Auxiliary; 5th, 6th Functions | 1 |
| 24***00 | Hydraulic Ar-6 Valve; -2-Lever, With Fnr | 1 |
113-3652 Kickout & Positioner Gp
| 09***40 | Bar | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
235-6820 Kickout & Positioner Gp
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
281-1595 Lines Gp-Bucket -Multipurpose
| 14***28 | Connector Assem. | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***60 | Tee As | 2 |
244-8945 Lines Gp-Connecting -Fifth, Sixth Functions, Standard Lift Machines
| 10***47 | Hose As | 2 |
| 10***54 | Connector-Orfs | 1 |
| 14***16 | Reducer As | 4 |
296-6814 Lines Gp-Coupler -Standard Lift Machines
| 10***68 | Hose As | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***25 | Connector As. | 3 |
290-7205 Lines Gp-Coupler
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***69 | Hose As | 2 |
| 14***25 | Connector As. | 6 |
303-2046 Lines Gp-Coupler -Standard Lift Machines
| 23***00 | Control Group-Work Tool; -Standard Lift Machines | 1 |
| 29***14 | Lines Group-Coupler; -Standard Lift Machines | 1 |
| 30***46 | Lines Group-Coupler; -Standard Lift Machines | 1 |
296-6815 Lines Gp-Coupler -High Lift Machines
| 10***68 | Hose As | 1 |
| 14***25 | Connector As. | 3 |
| 14***51 | Elbow Group | 2 |
248-5416 Lines Gp-Coupler -Third Function, Lower
| 15***17 | Cap-Dust | 1 |
| 15***18 | Cap-Dust | 1 |
| 24***89 | Fitting As; (Quick Disconnect, Male) | 1 |
297-2470 Lines Gp-Coupler -Standard Lift Machines
| 14***25 | Connector As. | 3 |
| 14***51 | Elbow Group | 1 |
| 14***68 | Elbow Group | 1 |
304-1062 Lines Gp-Coupler -Standard Lift, Wide
| 13***19 | Pin As | 2 |
| 13***27 | Pin As | 1 |
| 14***55 | Pin | 2 |
235-6924 Lines Gp-Front -Fourth Function
| 15***17 | Cap-Dust | 1 |
| 15***18 | Cap-Dust | 1 |
| 19***34 | Fitting As; (Quick Disconnect, Male) | 1 |
235-6923 Lines Gp-Front -Third Function
| 23***23 | Lines Group-Front; -Third Function | 1 |
| 24***50 | Bracket | 1 |
| 24***51 | Bracket | 1 |
118-1094 Lines Gp-Front
| 11***96 | Bracket | 1 |
| 11***97 | Bracket | 1 |
| 11***94 | Lines Group-Front | 1 |
235-6916 Lines Gp-Front -Third Function
| 23***16 | Lines Group-Front; -Third Function | 1 |
| 24***79 | Tube As | 1 |
| 24***14 | Tube As | 1 |
238-2656 Lines Gp-Front -Third Function, Proportional Flow
| 10***80 | Elbow Group | 1 |
| 11***65 | Hose Assembly | 1 |
| 14***25 | Connector As. | 2 |
235-6917 Lines Gp-Front -Fourth Function
| 15***17 | Cap-Dust | 1 |
| 15***18 | Cap-Dust | 1 |
| 19***34 | Fitting As; (Quick Disconnect, Male) | 1 |
289-8935 Lines Gp-Hydraulic
| 08***45 | Tee | 1 |
| 11***73 | Tube As | 1 |
| 13***02 | Hose As | 1 |
289-8806 Lines Gp-Hydraulic
| 09***79 | Plug | 1 |
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 14***67 | Clamp; (Hose) | 2 |
245-4861 Lines Gp-Hydraulic -4, 6-Valve
| 14***25 | Connector As. | 4 |
| 15***41 | Elbow As. | 1 |
| 15***52 | Connector As | 2 |
242-0093 Lines Gp-Hydraulic -Third Function, Continuous Flow
| 11***09 | Knob-Control | 1 |
| 14***25 | Connector As. | 3 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 1 |
245-4858 Lines Gp-Hydraulic -3, 4, 6-Valve
| 14***25 | Connector As. | 4 |
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***55 | Elbow As. | 1 |
289-8918 Lines Gp-Hydraulic Fan -Without Axle Oil Cooler
| 12***25 | Tee | 1 |
| 13***84 | Clip | 3 |
| 14***83 | Valve Group-Check; (Hydraulic Oil Cooler Bypass) | 1 |
323-1652 Lines Gp-Hydraulic Fan -Without Axle Oil Cooler
| 12***25 | Tee | 1 |
| 13***84 | Clip | 3 |
| 14***83 | Valve Group-Check; (Hydraulic Oil Cooler Bypass) | 1 |
290-7200 Lines Gp-Hydraulic Fan -Standard
| 10***63 | Hose As | 1 |
| 13***84 | Clip | 2 |
| 14***16 | Connector Group | 1 |
290-7201 Lines Gp-Hydraulic Fan -Reversing
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***16 | Connector Group | 1 |
290-6476 Lines Gp-Lift Cylinder
| 14***25 | Connector As. | 4 |
| 14***35 | Connect Group; (Each Includes) | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
118-0861 Lines Gp-Lift Cylinder
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 11***52 | Bolt-Hex Head; (M4x0.7x10mm) | 4 |
| 11***61 | Lines Group-Lift Cylinder | 1 |
203-5924 Lines Gp-Pilot -2-Valve
| 10***73 | Clip | 2 |
| 11***82 | Plate As | 1 |
| 11***39 | Plate As | 1 |
203-5925 Lines Gp-Pilot -3-Valve
| 10***73 | Clip | 2 |
| 11***82 | Plate As | 1 |
| 11***39 | Plate As | 1 |
289-8924 Lines Gp-Pilot
| 09***79 | Plug | 1 |
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 14***67 | Clamp; (Hose) | 4 |
290-7185 Lines Gp-Ride Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***16 | Switch As-Pressure; (Ride Control Disable) | 1 |
| 13***25 | Hose As | 1 |
218-3673 Lines Gp-Ride Control
| 12***44 | Hose As | 1 |
| 14***81 | Valve Group-Shuttle; (Ride Control) | 1 |
| 14***85 | Hose As | 1 |
245-4856 Lines Gp-Tilt Cylinder
| 13***60 | Hose As | 1 |
| 14***16 | Connector Group | 1 |
| 14***25 | Connector As. | 4 |
118-0862 Lines Gp-Tilt Cylinder
| 11***62 | Lines Group-Tilt Cylinder | 1 |
| 11***82 | Tube As | 1 |
| 11***85 | Bracket As | 1 |
233-2549 Manifold Gp-Control -Quick Coupler
| 10***08 | Kit-Seal; (Solenoid Valve, Quick Steer) | 1 |
| 23***49 | Manifold Group-Control; -Quick Coupler | 1 |
| 24***59 | Valve Group-Shuttle; (Quick Coupler) | 2 |
260-3016 Manifold Gp-Valve -Auxiliary, Inlet
| 22***85 | Valve Group-Flow Control; (Auxiliary, Inlet) | 1 |
| 22***98 | Kit-Seal; (Flow Control Valve) | 1 |
| 22***99 | Kit-Seal; (Control Manifold) | 1 |
283-9380 Manifold Gp-Valve -Inlet
| 13***50 | Valve Group-Purge; -Hydraulic Steering-Implement Signal | 1 |
| 14***11 | Plug Group | 1 |
| 14***59 | Plug | 1 |
289-8964 Motor & Mtg Gp-Hydraulic Fan
| 28***94 | Motor Group-Gear; -Reversing Fan | 1 |
| 28***64 | Motor & Mtg Group-Hydraulic Fan; -Reversing | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
289-8963 Motor Ar-Hydraulic Fan -Standard
| 28***62 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 28***63 | Motor Ar-Hydraulic Fan; -Standard | 1 |
| 29***00 | Lines Group-Hydraulic Fan; -Standard | 1 |
289-8965 Motor Ar-Hydraulic Fan -Reversing
| 28***64 | Motor & Mtg Group-Hydraulic Fan; -Reversing | 1 |
| 28***65 | Motor Ar-Hydraulic Fan; -Reversing | 1 |
| 29***01 | Lines Group-Hydraulic Fan; -Reversing Fan | 1 |
289-6393 Motor Gp-Gear -Hydraulic Fan
| 08***91 | Valve As-Check; (Hydraulic Fan Oil) | 1 |
| 11***32 | Adapter-Fan | 1 |
| 21***92 | Valve Group-Solenoid; -Hydraulic Fan | 1 |
289-8962 Motor Gp-Gear -Hydraulic Fan
| 28***93 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 28***62 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
289-6394 Motor Gp-Gear -Reversing Fan
| 08***91 | Valve As-Check; (Hydraulic Fan Oil) | 1 |
| 11***32 | Adapter-Fan | 1 |
| 18***00 | Valve Group-Solenoid; -Hydraulic Fan | 1 |
299-3940 Motor Gp-Gear -Hydraulic Fan
| 09***95 | Pin, Dowel | 4 |
| 13***35 | Seal-Shaft | 1 |
| 17***10 | Flange | 1 |
299-3939 Motor Gp-Gear -Reversing Fan
| 09***95 | Pin, Dowel | 4 |
| 13***35 | Seal-Shaft | 1 |
| 20***92 | Flange | 1 |
235-6941 Mounting Gp-Control Valve
| 23***41 | Mounting Group-Control Valve | 1 |
| 23***12 | Cover | 1 |
| 24***19 | Bracket As | 1 |
147-2038 Pivot Gp-Pilot Valve -Tilt
| 14***81 | Spacer | 1 |
| 14***15 | Pin-Adjustment | 2 |
| 14***17 | Retainer | 1 |
147-3114 Pivot Gp-Pilot Valve
| 13***89 | Plate | 1 |
| 14***81 | Spacer | 1 |
| 14***79 | Swivel | 1 |
160-6299 Pivot Gp-Pilot Valve -Tilt, Auxiliary
| 14***81 | Spacer | 1 |
| 14***15 | Pin-Adjustment | 2 |
| 14***17 | Retainer | 1 |
175-9436 Plate Gp-Pilot Valve
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 14***56 | Retainer | 2 |
| 14***32 | Plate | 2 |
163-4637 Plate Gp-Pilot Valve
| 13***97 | Plate | 1 |
| 13***98 | Retainer | 1 |
| 14***51 | Plate As | 1 |
163-4636 Plate Gp-Pilot Valve
| 13***97 | Plate | 1 |
| 13***98 | Retainer | 1 |
| 14***56 | Retainer | 1 |
147-3322 Plate Gp-Pilot Valve -Joystick
| 14***15 | Pin-Adjustment | 3 |
| 14***17 | Retainer | 3 |
| 14***22 | Plate Group-Pilot Valve; -Joystick | 1 |
289-8919 Pump & Mtg Gp-Brake & Hyd Fan
| 28***62 | Pump Group-Gear; -Brake, Hydraulic Fan | 1 |
| 28***19 | Pump & Mtg Group-Brake & Hydraulic Fan | 1 |
| 3E***16 | Bolt-Self-Locking; (M8x1.25x25-mm) | 4 |
235-6830 Pump & Mtg Gp-Impl & Steering
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 1 |
| 23***30 | Pump & Mtg Group-Impl & Steering | 1 |
| 23***92 | Pump Group-Piston; -Implement, Steering, Pilot | 1 |
118-1083 Pump & Mtg Gp-Impl & Steering
| 11***83 | Pump & Mtg Group-Impl & Steering | 1 |
| 11***98 | Pump Group-Piston & Vane; -Implement, Steering, Pilot | 1 |
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 1 |
288-4162 Pump Gp-Gear -Brake, Hydraulic Fan
| 16***99 | Nut; (M12x1.5-Thd) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 20***87 | Gear; (33-Teeth) | 1 |
299-3941 Pump Gp-Gear -Brake, Hydraulic Fan
| 08***69 | Bolt-Socket Head; (M10x1.5x130-mm) | 1 |
| 09***95 | Pin, Dowel | 3 |
| 13***15 | Seal-Shaft | 1 |
237-0292 Pump Gp-Piston -Implement, Steering, Pilot
| 00***54 | Cup-Roller Bearing | 1 |
| 03***48 | Cone-Bearing | 1 |
| 1P***72 | Cup-Roller Bearing | 1 |
120-0140 Pump Gp-Piston -Steering, Pilot
| 00***55 | Ring-Retaining | 1 |
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 2 |
| 03***28 | Seal-O-Ring | 1 |
119-7698 Pump Gp-Piston & Vane -Implement, Steering, Pilot
| 11***98 | Pump Group-Piston & Vane; -Implement, Steering, Pilot | 1 |
| 12***40 | Pump Group-Piston; -Steering, Pilot | 1 |
| 12***45 | Shaft-Pump | 1 |
9t-2031 Rotating Gp-Pump -Steering, Pilot
| 00***83 | Ring-Snap | 1 |
| 9T***31 | Rotating Group-Pump; -Steering, Pilot | 1 |
| 9T***57 | Pin | 3 |
289-8901 Tank & Mtg Gp-Hydraulic
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 26***54 | Tank Group-Hydraulic | 1 |
| 28***01 | Tank & Mtg Group-Hydraulic | 1 |
262-5654 Tank Gp-Hydraulic
| 14***37 | Cap As-Filler; (Hydraulic Tank) | 1 |
| 20***18 | Strainer; (Hydraulic Oil) | 1 |
| 20***46 | Gasket; (Hydraulic Tank) | 1 |
242-0098 Valve & Mtg Gp-Main Control -2-Function, Auxiliary
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
118-1095 Valve & Mtg Gp-Main Control -3-Function
| 11***95 | Valve & Mtg Group-Main Control; -3-Function | 1 |
| 13***35 | Valve Group-Main Control; -3-Function | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
118-1087 Valve & Mtg Gp-Main Control -2-Function
| 11***87 | Valve & Mtg Group-Main Control; -2-Function | 1 |
| 13***34 | Valve Group-Main Control; -2-Function | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
295-5544 Valve & Mtg Gp-Ride Control
| 29***72 | Control Group-Ride | 1 |
| 29***44 | Valve & Mtg Group-Ride Control | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
262-9706 Valve & Mtg Gp-Solenoid -Third Function, Proportional Flow
| 23***05 | Valve Group-Solenoid; -Third Fctn, Continuous Flow | 2 |
| 26***05 | Manifold As-Hydraulic | 1 |
| 26***06 | Valve & Mtg Group-Solenoid; -Third Function, Proportional Flow | 1 |
243-0651 Valve & Mtg Gp-Solenoid -Third Function Continuous Flow
| 23***05 | Valve Group-Solenoid; -Third Fctn, Continuous Flow | 1 |
| 24***51 | Valve & Mtg Group-Solenoid; -Third Function, Continuous Flow | 1 |
| 24***52 | Manifold | 1 |
9t-7634 Valve Gp-Check -Makeup
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 10***91 | Seal Kit | 1 |
| 9T***34 | Valve Group-Check; -Makeup | 1 |
270-0350 Valve Gp-Check -Load
| 27***50 | Valve Group-Check; -Pilot Oil-Load | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 6F***55 | Seal --To Manifold Ferrule | 1 |
158-9956 Valve Gp-Check -Implement Pilot Oil
| 15***56 | Valve Group-Check; -Pilot, Differential Lock Oil | 1 |
| 16***54 | Seal-O-Ring | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
173-4032 Valve Gp-Combination -Tilt Relief
| 17***32 | Valve Group-Combination; -Tilt Relief | 1 |
| 17***61 | Valve Group-Relief; -Tilt | 1 |
| 17***62 | Valve Group-Diverter; (Tilt) | 1 |
311-8271 Valve Gp-Control -Auxiliary
| 14***57 | Plug | 1 |
| 14***59 | Plug | 2 |
| 17***93 | Plug As | 2 |
311-8279 Valve Gp-Control -Tilt
| 14***57 | Plug | 1 |
| 14***59 | Plug | 2 |
| 17***93 | Plug As | 2 |
311-8273 Valve Gp-Control -Auxiliary
| 14***57 | Plug | 1 |
| 14***59 | Plug | 2 |
| 17***93 | Plug As | 2 |
238-4832 Valve Gp-Control -Tilt
| 14***57 | Plug | 1 |
| 14***59 | Plug | 2 |
| 17***93 | Plug As | 2 |
294-9504 Valve Gp-Control -Lift
| 14***57 | Plug | 1 |
| 14***59 | Plug | 2 |
| 17***93 | Plug As | 2 |
260-3018 Valve Gp-Control -Auxiliary; 5th, 6th Functions
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 16***16 | Ring-Backup | 1 |
| 22***86 | Valve As-Check | 2 |
317-6909 Valve Gp-Main Control -4-Function
| 18***63 | Plug Group | 1 |
| 24***62 | Bolt-Socket Head; (M12x1.75x330-mm) | 4 |
| 26***03 | Cover | 1 |
133-4234 Valve Gp-Main Control -2-Function
| 13***34 | Valve Group-Main Control; -2-Function | 1 |
| 14***10 | Plug As; (16.36mm Id) | 1 |
| 18***08 | Valve Group-Relief; -Lift Cylinder | 1 |
317-6907 Valve Gp-Main Control -3-Function
| 18***63 | Plug Group | 1 |
| 24***61 | Bolt; (M12x1.75x255-mm) | 4 |
| 26***03 | Cover | 1 |
280-1998 Valve Gp-Main Control -4-Function
| 18***63 | Plug Group | 1 |
| 23***32 | Valve Group-Control; -Tilt | 1 |
| 24***62 | Bolt-Socket Head; (M12x1.75x330-mm) | 4 |
133-4235 Valve Gp-Main Control -3-Function
| 13***35 | Valve Group-Main Control; -3-Function | 1 |
| 14***10 | Plug As; (16.36mm Id) | 1 |
| 18***08 | Valve Group-Relief; -Lift Cylinder | 1 |
242-0117 Valve Gp-Main Control -Auxiliary; 5th, 6th Functions
| 18***79 | Seal-O-Ring | 4 |
| 22***89 | Screen; (Pilot) | 1 |
| 24***17 | Valve Group-Main Control; -Auxiliary; 5th, 6th Functions | 1 |
280-1997 Valve Gp-Main Control -3-Function
| 18***63 | Plug Group | 1 |
| 23***32 | Valve Group-Control; -Tilt | 1 |
| 24***61 | Bolt; (M12x1.75x255-mm) | 4 |
112-1817 Valve Gp-Manual -Lowering Control
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 20***71 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
212-1302 Valve Gp-Pilot -Joystick, 2-Function
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***97 | Plate | 1 |
| 13***98 | Retainer | 1 |
287-2062 Valve Gp-Pilot -Joystick, 3-Function
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***37 | Rod | 1 |
| 12***01 | Knob; (Auxiliary) | 1 |
287-2056 Valve Gp-Pilot -Joystick, 2-Function
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***93 | Screw-Button Head; (M4x0.7x12-mm) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
212-1305 Valve Gp-Pilot -Joystick, 4-Function
| 03***39 | Ring-Retaining | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 1 |
201-3359 Valve Gp-Pilot -Joystick, 2-Function
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 14***52 | Boot | 1 |
| 14***81 | Spacer | 1 |
201-3360 Valve Gp-Pilot -2-Function
| 03***39 | Ring-Retaining | 4 |
| 13***92 | Boot | 2 |
| 14***36 | Screen As; (Blade Control Valve) | 1 |
201-3361 Valve Gp-Pilot -Joystick, 3-Function
| 03***39 | Ring-Retaining | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 1 |
287-2064 Valve Gp-Pilot -Joystick, 4-Function
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***37 | Rod | 1 |
| 11***40 | Rod | 1 |
287-2061 Valve Gp-Pilot -Joystick, 2-Function
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***59 | Rod-Control; (Joystick) | 1 |
| 15***93 | Screw-Button Head; (M4x0.7x12-mm) | 2 |
250-8085 Valve Gp-Pilot -Joystick, 2-Function
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***97 | Plate | 1 |
| 13***98 | Retainer | 1 |
287-2065 Valve Gp-Pilot -2-Function
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***40 | Rod | 1 |
| 12***01 | Knob; (Auxiliary) | 1 |
260-3024 Valve Gp-Pilot -Auxiliary
| 26***14 | Coil As | 1 |
| 26***24 | Valve Group-Pilot; -Auxiliary | 1 |
| 7K***81 | Strap-Pressure & Return Hoses To | 1 |
212-1307 Valve Gp-Pilot -Joystick, 4-Function
| 03***39 | Ring-Retaining | 4 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 2 |
202-2558 Valve Gp-Pilot Cartridge
| 14***19 | Retainer | 1 |
| 15***25 | Plug-Stop | 1 |
| 15***26 | Spring; (Small) | 1 |
168-6503 Valve Gp-Pilot Cartridge
| 14***19 | Retainer | 1 |
| 15***25 | Plug-Stop | 1 |
| 15***26 | Spring; (Small) | 1 |
168-6504 Valve Gp-Pilot Cartridge
| 14***19 | Retainer | 1 |
| 15***25 | Plug-Stop | 1 |
| 15***26 | Spring; (Small) | 1 |
185-5209 Valve Gp-Pressure Reducing -Pilot Oil
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 11***97 | Check Valve Group | 1 |
| 12***85 | Ring-Backup | 1 |
193-1665 Valve Gp-Pressure Reducing
| 19***64 | Valve Group-Control | 1 |
| 19***65 | Valve Group-Pressure Reducing; -Signal Duplication | 1 |
| 30***41 | Ring-Backup | 1 |
184-9975 Valve Gp-Pressure Reducing
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***43 | Seal-O-Ring | 1 |
| 18***75 | Valve Group-Pressure Reducing | 1 |
228-0391 Valve Gp-Pump Control -Pressure, Flow Compensator-Steering, Pilot
| 13***22 | Spring-Margin | 1 |
| 17***93 | Plug As | 3 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
131-8350 Valve Gp-Purge
| 10***44 | Valve | 1 |
| 13***70 | Sleeve | 1 |
| 13***50 | Valve Group-Purge; -Hydraulic Steering-Implement Signal | 1 |
341-8323 Valve Gp-Relief -Main
| 34***23 | Valve Group-Relief; -Main | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***42 | Spring | 1 |
173-7061 Valve Gp-Relief -Tilt
| 13***45 | Seal Kit; (Includes Parts Marked J) | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
| 16***61 | Ring-Backup | 2 |
186-0913 Valve Gp-Relief -Line
| 03***79 | Seal-O-Ring (Id=10.82mm) | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 15***03 | Service Kit; (Consist Of Seal, Ring And Spring) | 1 |
251-9918 Valve Gp-Relief -Line
| 03***67 | Ring; (Back Up) | 1 |
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***36 | Seal-O-Ring | 2 |
186-0905 Valve Gp-Relief -Line
| 03***79 | Seal-O-Ring (Id=10.82mm) | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 15***03 | Service Kit; (Consist Of Seal, Ring And Spring) | 1 |
185-7708 Valve Gp-Relief -Line
| 03***28 | Seal-O-Ring | 1 |
| 13***76 | Seal-O-Ring | 1 |
| 18***08 | Valve Group-Relief; -Lift Cylinder | 1 |
297-1209 Valve Gp-Ride Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***46 | Kit-Seal; (Valve) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
280-9978 Valve Gp-Ride Control
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
| 25***41 | Valve Group-Solenoid; (Hydraulic Lockout) | 1 |
| 25***45 | Coil As | 1 |
225-1057 Valve Gp-Shutoff -Hydraulic Lockout
| 09***79 | Plug | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
141-1481 Valve Gp-Shuttle
| 12***57 | Valve Group-Shuttle | 1 |
| 14***81 | Valve Group-Shuttle; (Ride Control) | 1 |
260-8590 Valve Gp-Shuttle
| 24***56 | Kit-Seal; (Shuttle Valve)(Implement Control) | 1 |
| 26***90 | Valve Group-Shuttle; -Implement Pilot Oil | 1 |
| 3H***42 | Seal; (Included In Seal Kit) | 1 |
125-3657 Valve Gp-Shuttle
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 12***57 | Valve Group-Shuttle | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
225-0300 Valve Gp-Solenoid
| 20***71 | Kit-Seal; (Solenoid Valve) | 1 |
| 21***61 | Flange | 1 |
| 22***00 | Valve Group-Solenoid; -Hydraulic Lockout | 1 |
201-0950 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***33 | Coil As; (24-Volt) | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 2 |
189-2100 Valve Gp-Solenoid -Hydraulic Fan
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 18***00 | Valve Group-Solenoid; -Hydraulic Fan | 1 |
211-2092 Valve Gp-Solenoid
| 03***28 | Seal-O-Ring | 1 |
| 12***32 | Ring-Backup | 1 |
| 21***92 | Valve Group-Solenoid; -Hydraulic Fan | 1 |
235-4605 Valve Gp-Solenoid
| 03***43 | Seal-O-Ring | 1 |
| 14***28 | Washer-Spring | 1 |
| 23***05 | Valve Group-Solenoid; -Third Fctn, Continuous Flow | 1 |
329-5064 Valve Gp-Solenoid -24-Volt
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
| 19***30 | Kit-Seal; (Solenoid Valve) | 1 |
| 24***81 | Coil As | 1 |
Implements
163-4330 Bracket Gp-Transport
| 10***03 | Restrainer | 1 |
| 16***30 | Bracket Group-Transport | 1 |
| 17***40 | Bracket As | 2 |
113-3706 Control Gp-Bucket
| 11***06 | Control Group-Bucket | 1 |
| 11***10 | Crossmember As | 1 |
| 11***15 | Arm As-Lift | 1 |
235-7500 Control Gp-Work Tool -High Lift Machines
| 10***76 | Seal-O-Ring | 4 |
| 14***90 | Pin As | 1 |
| 14***00 | Pin As | 1 |
235-7300 Control Gp-Work Tool -Standard Lift Machines
| 10***76 | Seal-O-Ring | 4 |
| 14***90 | Pin As | 1 |
| 14***00 | Pin As | 1 |
303-2047 Linkage Ar-Front -High Lift Machines
| 23***00 | Control Group-Work Tool; -High Lift Machines | 1 |
| 29***15 | Lines Group-Coupler; -High Lift Machines | 1 |
| 30***47 | Linkage Ar-Front; -High Lift Machines | 1 |
Lubrication System
280-2050 Breather Gp -Crankcase
| 27***11 | Breather As; (Crankcase) | 1 |
| 28***50 | Breather Group; -Crankcase | 1 |
277-1973 Filler Gp-Engine Oil
| 11***04 | Seal-O-Ring | 1 |
| 13***88 | Cap-Oil Filler; (Engine) | 1 |
| 27***73 | Filler Group-Engine Oil | 1 |
277-2912 Filter Gp-Engine Oil
| 26***25 | Filter-Engine Oil | 1 |
| 27***12 | Filter Group-Engine Oil; -Engine | 1 |
277-4262 Pump Gp-Engine Oil
| 27***62 | Pump Group-Engine Oil | 1 |
| 31***45 | Pump-Oil; (Engine) | 1 |
| 6I***90 | Bolt; (M8x1.25x40-mm) | 4 |
277-4694 Valve Gp-Fluid Sampling -Engine Oil
| 19***67 | Seal-O-Ring | 1 |
| 21***33 | Valve As-Fluid Sampling | 1 |
| 23***61 | Plug; (Blanking) | 1 |
330-6502 Valve Gp-Fluid Sampling
| 19***67 | Seal-O-Ring | 1 |
| 21***33 | Valve As-Fluid Sampling | 1 |
| 22***41 | Plug | 1 |
Machine Arrangement
289-8861 Chassis Ar
| 11***06 | Control Group-Bucket | 1 |
| 11***83 | Link Group-Steering Frame Lock | 1 |
| 11***85 | Frame Group-Loader | 1 |
290-6497 Chassis Ar
| 11***90 | Hitch Group-Articulating | 1 |
| 13***71 | Mounting Group-Axle | 1 |
| 13***85 | Battery Group | 1 |
289-8881 Chassis Ar
| 11***90 | Hitch Group-Articulating | 1 |
| 13***71 | Mounting Group-Axle | 1 |
| 13***85 | Battery Group | 1 |
289-8889 Common Ar
| 28***02 | Electronics Ar-Machine | 1 |
| 28***43 | Hydraulic Ar | 1 |
| 28***89 | Common Ar | 1 |
289-8860 Common Ar
| 28***02 | Electronics Ar-Machine | 1 |
| 28***45 | Power Train Ar | 1 |
| 28***60 | Common Ar | 1 |
289-8880 Common Ar
| 28***02 | Electronics Ar-Machine | 1 |
| 28***35 | Power Train Ar | 1 |
| 28***80 | Common Ar | 1 |
300-1887 Protection Ar-Corrosion
| 03***32 | Strap--Harness Assembly To Compressor | 1 |
| 22***30 | Tag-Warning; (Cylinder Covers) | 1 |
| 30***70 | Cover Group-Cylinder; (Lift, Tilt, Steering Cyl Boot) | 1 |
290-7176 Waste Handling Ar
| 17***60 | Guard Group-Window | 1 |
| 20***12 | Guard Group-Radiator; -Waste Handler | 1 |
| 21***18 | Plate As | 1 |
290-7175 Waste Handling Ar
| 17***60 | Guard Group-Window | 1 |
| 20***12 | Guard Group-Radiator; -Waste Handler | 1 |
| 21***18 | Plate As | 1 |
Operator Station
173-1028 Adjuster Gp-Seat
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
237-3970 Air Compressor Gp-Seat
| 23***70 | Air Compressor Group-Seat | 1 |
284-0506 Air Conditioner & Mounting Gp -With Cable Control
| 11***59 | Gasket; (Air Conditioner) | 1 |
| 14***74 | Boot | 1 |
| 15***49 | Cable As; (Heater Temperature Control) | 1 |
290-8751 Air Conditioner Ar
| 19***65 | Panel Group-Top; -Hood, Air Conditioner | 1 |
| 20***37 | Condenser & Mtg Group-Refrigerant | 1 |
| 26***58 | Compressor Group-Refrigerant | 1 |
306-8142 Air Conditioner Gp
| 03***26 | Retainer | 1 |
| 10***41 | Clip; (Slot) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
214-7636 Arm Gp-Window Wiper -Front
| 13***88 | Clip | 3 |
| 13***90 | Nozzle As-Washer | 1 |
| 19***21 | Bolt-Socket Head; (M6x1x25-mm) | 4 |
307-0205 Arm Gp-Window Wiper -Rear
| 13***88 | Clip | 3 |
| 13***95 | Nozzle As-Washer | 1 |
| 19***21 | Bolt-Socket Head; (M6x1x25-mm) | 2 |
8y-6000 Armrest Gp -Lh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 1K***72 | Locknut Horn To Guard | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 1 |
162-8447 Armrest Gp -Lh
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***47 | Armrest Group; -Lh | 1 |
| 16***49 | Bracket Assem.; (Lh) | 1 |
292-1302 Armrest Gp -Rh
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 1 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***48 | Bracket Assem.; (Rh) | 1 |
8y-5904 Armrest Gp
| 3E***12 | Nut-Square; (3/8-16-Thd) | 1 |
| 6V***87 | Screw-Pan Head; (10-24x1-In) | 4 |
| 8S***03 | Ring-Retaining | 1 |
8y-4200 Armrest Gp -Rh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 1K***72 | Locknut Horn To Guard | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 1 |
162-8448 Armrest Gp -Rh
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***48 | Armrest Group; -Rh | 1 |
| 16***48 | Bracket Assem.; (Rh) | 1 |
292-1301 Armrest Gp -Lh
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 1 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***49 | Bracket Assem.; (Lh) | 1 |
290-8529 Cab Ar-Enclosed Rops -Sliding Windows
| 22***29 | Installation Group-Radio | 1 |
| 23***76 | Skirt Group-Cab; -Enclosed Rops | 1 |
| 29***26 | Operator Ar-Enclosed Rops; -Sliding Window | 1 |
290-8523 Cab Ar-Enclosed Rops -Sliding Windows
| 19***05 | Operator Ar | 1 |
| 29***21 | Cab Ar-Enclosed Rops; -Sliding Windows | 1 |
| 29***23 | Cab Ar-Enclosed Rops; -Sliding Windows | 1 |
316-0000 Cab Ar-Enclosed Rops -With Sliding Windows
| 10***41 | Visor Group-Cab | 1 |
| 11***50 | Screen Group-Sun; -Cab | 1 |
| 22***29 | Installation Group-Radio | 1 |
316-0001 Cab Ar-Enclosed Rops -With Sliding Windows
| 10***41 | Visor Group-Cab | 1 |
| 11***50 | Screen Group-Sun; -Cab | 1 |
| 19***66 | Skirt Group-Cab; -Enclosed Rops | 1 |
290-8521 Cab Ar-Enclosed Rops -Sliding Windows
| 29***81 | Lighting Group-Flood; -Cab Front, Rear | 1 |
| 29***94 | Door Group-Cab; -Sliding Windows | 1 |
| 29***02 | Rops Group-Enclosed | 1 |
290-8524 Cab Ar-Enclosed Rops -Sliding Windows
| 10***41 | Visor Group-Cab | 1 |
| 11***58 | Lighting Group-Auxiliary; -2-Lamp, Cab, Front | 1 |
| 11***50 | Screen Group-Sun; -Cab | 1 |
290-8747 Cab Ar-Enclosed Rops -Sliding Windows
| 19***66 | Skirt Group-Cab; -Enclosed Rops | 1 |
| 22***29 | Installation Group-Radio | 1 |
| 29***26 | Operator Ar-Enclosed Rops; -Sliding Window | 1 |
290-8754 Cab Ar-Enclosed Rops -Sliding Windows
| 10***41 | Visor Group-Cab | 1 |
| 11***58 | Lighting Group-Auxiliary; -2-Lamp, Cab, Front | 1 |
| 11***50 | Screen Group-Sun; -Cab | 1 |
290-8500 Cab Gp-Enclosed Rops
| 10***44 | Glass-Front; (Lh) | 1 |
| 10***45 | Glass-Front; (Center)(Lh) | 1 |
| 10***46 | Glass-Cab Corner; (Lh Rear) | 1 |
290-8183 Canopy Ar-Open Rops
| 19***06 | Operator Group | 1 |
| 29***80 | Canopy Group-Open Rops | 1 |
| 29***83 | Canopy Ar-Open Rops | 1 |
290-8484 Canopy Ar-Open Rops
| 19***65 | Skirt Group-Cab; -Open Rops | 1 |
| 25***37 | Alternator Group-Charging; -24-Volt, 95-Ampere | 1 |
| 29***87 | Operator Ar-Open Rops | 1 |
290-8190 Canopy Ar-Open Rops
| 23***75 | Skirt Group-Cab; -Open Rops | 1 |
| 25***37 | Alternator Group-Charging; -24-Volt, 95-Ampere | 1 |
| 29***87 | Operator Ar-Open Rops | 1 |
290-8180 Canopy Gp-Open Rops
| 29***78 | Rops Group-Open | 1 |
| 29***80 | Canopy Group-Open Rops | 1 |
| 31***72 | Lighting Group-Flood; -Canopy Front, Rear | 1 |
183-5106 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 18***06 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
262-0858 Compressor Gp-Refrigerant
| 18***06 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
| 26***49 | Bracket | 1 |
| 26***58 | Compressor Group-Refrigerant | 1 |
203-5937 Condenser & Mtg Gp-Refrigerant
| 20***63 | Condenser & Mtg Group-Refrigerant | 1 |
| 20***37 | Condenser & Mtg Group-Refrigerant | 1 |
| 20***24 | Bracket As | 2 |
202-0363 Condenser & Mtg Gp-Refrigerant
| 19***41 | Condenser Group-Refrigerant | 1 |
| 20***63 | Condenser & Mtg Group-Refrigerant | 1 |
| 20***25 | Bracket | 1 |
199-7041 Condenser Gp-Refrigerant
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 16***35 | Harness As-Heater & Air Cond; (Condenser Fans) | 1 |
291-3750 Console Gp-Operator
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 6 |
| 18***82 | Lever-Control; (Armrest Adjustment) | 1 |
266-3439 Control Gp-Handle -Fnr, Third Function, Proportional Flow
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 15***75 | Kit-Receptacle; (6-Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 10 |
266-7545 Control Gp-Joystick -Fnr, 3-Function, With Proportional Flow Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 11***09 | Knob-Control | 1 |
287-2060 Control Gp-Joystick -Joystick, 4-Function
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***37 | Rod | 1 |
| 12***01 | Knob; (Auxiliary) | 1 |
247-0841 Control Gp-Joystick -4-Function, Auxiliary
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***22 | Kit-Lever; (Joystick) | 1 |
| 17***03 | Boot | 1 |
242-0096 Control Gp-Pilot Operated Hyd -Joystick, 6-Function
| 22***17 | Bracket | 1 |
| 24***96 | Control Group-Pilot Operated Hydraulic; -Joystick, 6-Function | 1 |
| 24***41 | Control Group-Joystick; -4-Function, Auxiliary | 1 |
235-6856 Control Gp-Pilot Operated Hyd -Joystick, 3-Function
| 17***97 | Plate-Instruction; (Implement With Joystick) | 1 |
| 22***17 | Bracket | 1 |
| 23***56 | Control Group-Pilot Operated Hydraulic; -Joystick, 3-Function | 1 |
263-5812 Control Gp-Pilot Operated Hyd -Joystick, 4-Function
| 22***17 | Bracket | 1 |
| 25***60 | Plate | 1 |
| 26***88 | Support As; (Pilot Operated Hydraulic) | 1 |
220-1506 Control Gp-Pilot Operated Hyd -Joystick, 2-Function
| 14***93 | Plate-Instrument | 1 |
| 22***06 | Control Group-Pilot Operated Hydraulic; -Joystick, 2-Function | 1 |
| 22***17 | Bracket | 1 |
220-1509 Control Gp-Pilot Operated Hyd -Joystick, 3-Function
| 14***93 | Plate-Instrument | 1 |
| 22***09 | Control Group-Pilot Operated Hydraulic; -Joystick, 3-Function | 1 |
| 22***17 | Bracket | 1 |
235-6860 Control Gp-Pilot Operated Hyd -Joystick, 4-Function
| 17***96 | Plate-Instruction; (Implement With Joystick) | 1 |
| 22***17 | Bracket | 1 |
| 23***60 | Control Group-Pilot Operated Hydraulic; -Joystick, 4-Function | 1 |
263-5810 Control Gp-Pilot Operated Hyd -Joystick, 3-Function
| 22***17 | Bracket | 1 |
| 25***59 | Plate | 1 |
| 26***88 | Support As; (Pilot Operated Hydraulic) | 1 |
220-1505 Control Gp-Pilot Operated Hyd -2-Function
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***91 | Plate-Instruction; (Bucket Controls) | 1 |
| 22***05 | Control Group-Pilot Operated Hydraulic; -2-Function | 1 |
190-4635 Control Gp-Steering
| 10***07 | Support Assem. | 1 |
| 10***41 | Cover | 1 |
| 11***74 | Seal | 1 |
190-4690 Control Gp-Transmission
| 10***61 | Wire Assembly; (Rear) | 1 |
| 13***74 | Bolt-Socket Head; (M5x0.8x20-mm) | 4 |
| 19***90 | Control Group-Transmission | 1 |
299-5841 Control Gp-Transmission
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***65 | Kit-Connecting Plug; (8-Pin)(Electronic Control Channel) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 2 |
118-0809 Dash Gp
| 11***09 | Dash Group | 1 |
| 16***87 | Dash Assem. | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 4 |
207-5948 Defroster Gp-Cab
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 20***99 | Switch As-Rocker; (Defroster) | 1 |
| 20***48 | Defroster Group-Cab | 1 |
290-0662 Display Gp-Camera
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 24***76 | Clip | 7 |
289-8961 Door Gp-Access -Hood Side
| 28***61 | Door Group-Access; -Hood Side | 1 |
| 29***06 | Door Group-Access; -Hood Side, Lh | 1 |
| 29***10 | Door Group-Access; -Hood Side, Rh | 1 |
289-8960 Door Gp-Access -Hood Side
| 19***45 | Door As-Hood; (Rh) | 1 |
| 19***46 | Door As-Hood; (Lh) | 1 |
| 28***00 | Door As-Access; (Lh) | 1 |
291-5010 Door Gp-Access -Hood Side, Rh
| 14***55 | Seal; (125.5-cm Each) | 0 |
| 19***45 | Door As-Hood; (Rh) | 1 |
| 29***10 | Door Group-Access; -Hood Side, Rh | 1 |
291-5006 Door Gp-Access -Hood Side, Lh
| 14***55 | Seal; (125.5-cm Each) | 0 |
| 19***46 | Door As-Hood; (Lh) | 1 |
| 29***06 | Door Group-Access; -Hood Side, Lh | 1 |
290-8496 Door Gp-Cab -Sliding Window, Lh
| 14***80 | Ring-Retaining | 1 |
| 16***40 | Cover | 1 |
| 16***41 | Plate | 1 |
290-8495 Door Gp-Cab -Sliding Window, Rh
| 14***80 | Ring-Retaining | 1 |
| 16***40 | Cover | 1 |
| 16***41 | Plate | 1 |
290-8494 Door Gp-Cab -Sliding Windows
| 29***94 | Door Group-Cab; -Sliding Windows | 1 |
| 29***95 | Door Group-Cab; -Sliding Window, Rh | 1 |
| 29***96 | Door Group-Cab; -Sliding Window, Lh | 1 |
290-8492 Door Gp-Cab -Rh
| 09***23 | Ring-Retaining; (External) | 1 |
| 10***04 | Insert | 2 |
| 10***20 | Plate As | 1 |
290-8493 Door Gp-Cab -Lh
| 09***23 | Ring-Retaining; (External) | 1 |
| 10***20 | Plate As | 1 |
| 11***00 | Handrail; (Grab) | 1 |
107-4630 Duct Gp-Cab Air
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 12 |
| 10***30 | Duct Group-Cab Air | 1 |
| 10***79 | Duct | 1 |
8y-6883 Extension Gp-Backrest -Cloth
| 11***30 | Kit-Cushion; (Cloth Backrest) | 1 |
| 8Y***77 | Pan As-Extension | 1 |
| 8Y***47 | Fastener | 2 |
119-4769 Filter Gp-Cab Air
| 11***38 | Filter Element-Cab Air; (Primary) | 1 |
| 11***44 | Cover | 1 |
| 11***56 | Knob-Control | 4 |
290-8488 Floor Mat Gp
| 11***81 | Cover As; (Cab) | 1 |
| 11***61 | Cover | 1 |
| 12***96 | Bracket | 1 |
317-0769 Floor Mat Gp -Cab
| 11***81 | Cover As; (Cab) | 1 |
| 11***61 | Cover | 1 |
| 12***96 | Bracket | 1 |
290-8486 Floor Mat Gp
| 11***81 | Cover As; (Cab) | 1 |
| 12***96 | Bracket | 1 |
| 12***15 | Kit-Brush Seal; (Cab Liner, Lower) | 1 |
317-0692 Floor Mat Gp -Canopy
| 11***81 | Cover As; (Cab) | 1 |
| 12***96 | Bracket | 1 |
| 12***15 | Kit-Brush Seal; (Cab Liner, Lower) | 1 |
290-7198 Guard Gp-Fan
| 00***01 | Ring-Retaining | 1 |
| 11***45 | Latch As-Door | 1 |
| 12***46 | Plate | 1 |
215-1132 Guard Gp-Vandalism
| 12***08 | Screw-Hex Socket; (M4x0.7x30-mm) | 4 |
| 13***80 | Plate Assem. | 1 |
| 13***82 | Plate | 1 |
175-6750 Guard Gp-Window
| 17***50 | Guard Group-Window | 1 |
| 17***60 | Guard Group-Window | 1 |
175-6760 Guard Gp-Window
| 17***46 | Screen As; (Front) | 1 |
| 17***49 | Plate | 2 |
| 17***54 | Screen As; (Rh) | 1 |
108-4582 Housing Gp-Seat Suspension
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
107-4645 Installation Gp-Radio
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***45 | Installation Group-Radio | 1 |
225-4329 Installation Gp-Radio
| 10***45 | Installation Group-Radio | 1 |
| 20***47 | Converter Group-Electrical | 1 |
| 22***29 | Installation Group-Radio | 1 |
241-8564 Liner Gp-Cab -Upper
| 10***32 | Lamp Group-Dome | 1 |
| 11***53 | Bracket Assem. | 1 |
| 11***54 | Cover | 1 |
290-8752 Lines Gp-Air Conditioner
| 10***04 | Suppressor As-Arc | 1 |
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
290-8753 Lines Gp-Cab Heater
| 20***25 | Clip | 1 |
| 29***53 | Lines Group-Cab Heater | 1 |
| 30***61 | Bracket As | 1 |
6v-1970 Literature Gp
| 5P***58 | Sleeve; (Cable Splice) | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
| 6V***70 | Literature Group; (Literature Compartment) | 1 |
290-7208 Mirror Gp -Rear View, Down View
| 11***56 | Plate | 2 |
| 22***49 | Arm As | 1 |
| 22***50 | Mirror; (Exterior, Rear) | 1 |
290-8749 Mirror Gp -Exterior, Heated
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 26***27 | Mirror As | 2 |
107-4643 Mirror Gp-Rear View -Interior
| 10***43 | Mirror Group-Rear View; -Interior | 1 |
| 11***56 | Plate | 2 |
| 23***46 | Nut-Jam; (3/8-16-Thd) | 2 |
260-3183 Mirror Gp-Rear View -Interior, Lh
| 11***56 | Plate | 1 |
| 23***46 | Nut-Jam; (3/8-16-Thd) | 1 |
| 26***83 | Mirror Group-Rear View; -Interior, Lh | 1 |
155-5783 Motor Gp-Window Wiper -Front
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
| 15***83 | Motor Group-Window Wiper; -Front | 1 |
155-5784 Motor Gp-Window Wiper -Rear
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
| 15***84 | Motor Group-Window Wiper; -24-Volt | 1 |
156-4271 Mounting Gp-Cab
| 15***71 | Mounting Group-Cab | 1 |
| 6Y***25 | Sleeve-Rops | 4 |
| 7X***67 | Bolt-Plt; (M24 X 3.0 X 160) | 4 |
256-7267 Mounting Gp-Display -Work Area Visual System
| 25***67 | Mounting Group-Display; -Work Area Visual System | 1 |
| 25***97 | Clamp Group; (Monitor Mount) | 1 |
| 25***98 | Ball | 1 |
317-0770 Operator Ar
| 10***28 | Wiper Group-Window | 1 |
| 10***30 | Duct Group-Cab Air | 1 |
| 10***33 | Switch Group-Wiper; -Intermittent | 1 |
190-4405 Operator Ar
| 10***28 | Wiper Group-Window | 1 |
| 10***30 | Duct Group-Cab Air | 1 |
| 10***34 | Liner Group-Cab | 1 |
290-8526 Operator Ar-Enclosed Rops -Sliding Window
| 13***36 | Washer Group-Window | 1 |
| 15***71 | Mounting Group-Cab | 1 |
| 28***03 | Wiring Group-Cab; -Enclosed Rops | 1 |
290-8187 Operator Ar-Open Rops
| 15***71 | Mounting Group-Cab | 1 |
| 19***64 | Panel Group-Access; -Hood, Cab Heater | 1 |
| 28***04 | Wiring Group-Cab; -Open Rops | 1 |
317-0771 Operator Gp
| 11***08 | Support Group-Seat | 1 |
| 11***09 | Dash Group | 1 |
| 19***35 | Control Group-Steering | 1 |
190-4406 Operator Gp
| 10***43 | Mirror Group-Rear View; -Interior | 1 |
| 11***08 | Support Group-Seat | 1 |
| 11***09 | Dash Group | 1 |
108-8421 Pan Gp-Backrest -Lumbar
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
| 10***23 | Shaft As-Lumbar | 1 |
| 10***24 | Pan-Lumbar | 1 |
292-9237 Pan Gp-Backrest -Cloth
| 16***83 | Knob-Lumbar | 1 |
| 25***28 | Plug | 3 |
| 29***97 | Cushion As-Back | 1 |
292-6402 Pan Gp-Backrest -Lumbar
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***07 | Holder | 1 |
8y-5992 Pan Gp-Seat
| 3K***97 | Pin 3.18 mm(.125 In.) Diameter | 4 |
| 6V***56 | Ring-Retaining | 2 |
| 8Y***92 | Pan As-Seat; (Bottom) | 1 |
290-8169 Panel Gp-Instrument -Front
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***87 | Start Switch Assembly; (Key)(Engine) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 2 |
290-8174 Panel Gp-Instrument -Open Rops
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 8 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
290-8171 Panel Gp-Instrument -Enclosed Rops
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 8 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
174-9730 Pedal Gp-Brake
| 10***56 | Pedal Assem.; (L.H.) | 1 |
| 11***32 | Pedal Assem.; (R.H) | 1 |
| 17***25 | Support As | 1 |
190-4700 Pedal Gp-Governor
| 19***00 | Pedal Group-Governor | 1 |
| 31***64 | Pedal Group-Governor; -Electronic | 1 |
| 9X***45 | Screw-Truss Head (M6x1x20mm); (M6x1x20-mm) | 3 |
317-0720 Pedal Gp-Governor
| 26***78 | Pedal Group-Governor | 1 |
| 26***83 | Sensor Group-Position; (Throttle) | 1 |
| 29***46 | Insert | 4 |
310-1564 Pedal Gp-Governor -Electronic
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 17***24 | Locknut; (M5x0.8-Thd) | 2 |
331-5291 Radio Gp -Am/Fm/Wb/Cd Player
| 19***54 | Sleeve | 1 |
| 33***91 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
248-4152 Radio Gp -Am/Fm/Wb/Cd Player
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
| 17***39 | Terminal; (Radio) | 11 |
241-4941 Radio Gp -Am/Fm/Wb
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
| 17***39 | Terminal; (Radio) | 11 |
331-5292 Radio Gp -Am, Fm
| 19***54 | Sleeve | 1 |
| 33***92 | Radio Group; -Am/Fm/Wb | 1 |
210-2270 Recliner Gp-Seat
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
290-8502 Rops Gp-Enclosed
| 09***79 | Plug | 8 |
| 17***30 | Pedal Group-Brake | 1 |
| 29***00 | Cab Group-Enclosed Rops | 1 |
290-8178 Rops Gp-Open
| 11***55 | Cover | 1 |
| 17***30 | Pedal Group-Brake | 1 |
| 29***76 | Canopy As | 1 |
118-7250 Screen Gp-Sun
| 11***50 | Screen Group-Sun; -Cab | 1 |
| 11***73 | Hook-Retainer | 2 |
107-5978 Seat & Mounting Gp
| 10***78 | Seat & Mounting Group | 1 |
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
257-5104 Seat & Mounting Gp -Vinyl
| 11***36 | Plate | 1 |
| 22***37 | Seat Belt Group; -Retractable | 1 |
| 23***87 | Seat Group-Suspension; -Vinyl | 1 |
156-1148 Seat Belt Gp -Retractable
| 15***48 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 1L***80 | Bolt; (7/16-20x1.5-In) | 1 |
222-0345 Seat Belt Gp -Retractable
| 0T***44 | Bolt (1.25" Long) | 1 |
| 20***88 | Bolt; (7/16-20) (44.5mml) | 1 |
| 22***45 | Seat Belt Group; -Retractable | 1 |
8y-6882 Seat Gp -Cloth, Lumbar
| 06***03 | Shim (.060mm Thk); (1.52-mm Thk) | 4 |
| 09***78 | Pin-Spring | 1 |
| 09***14 | Pin, Clevis | 1 |
178-7914 Seat Gp
| 11***91 | Rod | 1 |
| 17***03 | Seat Group; (Fabric) | 1 |
| 17***14 | Seat Group; -Cloth | 1 |
178-0603 Seat Gp -Cloth
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
257-5103 Seat & Mounting Gp -Cloth
| 11***36 | Plate | 1 |
| 22***37 | Seat Belt Group; -Retractable | 1 |
| 23***88 | Seat Group-Suspension; -Cloth | 1 |
8y-6977 Seat Gp-Suspension
| 10***82 | Suspension Group-Seat; -Contour-Shock Absorber | 1 |
| 14***45 | Kit-Slider Block; (Suspension Seat) | 1 |
| 15***48 | Seat Belt Group; -Retractable-Operator | 1 |
233-7388 Seat Gp-Suspension -Cloth
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
| 15***86 | Kit-Cover; (Seat) | 1 |
219-8096 Seat Gp-Suspension -Air
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 17***14 | Seat Group; -Cloth | 1 |
233-7387 Seat Gp-Suspension -Vinyl
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
| 15***57 | Kit-Cover; (Back) | 1 |
239-5814 Seat & Mounting Gp
| 0T***44 | Bolt (1.25" Long) | 1 |
| 17***37 | Spacer; (11.7x19.8x20.3-mm Thk)(Lh Seat Side) | 1 |
| 20***88 | Bolt; (7/16-20) (44.5mml) | 1 |
190-4666 Skirt Gp-Cab -Enclosed Rops
| 12***82 | Sheet As | 1 |
| 12***83 | Sheet As | 1 |
| 12***84 | Sheet As | 1 |
235-6876 Skirt Gp-Cab -Enclosed Rops
| 23***76 | Skirt Group-Cab; -Enclosed Rops | 1 |
| 23***66 | Sheet As | 1 |
| 23***67 | Sheet As | 1 |
190-4665 Skirt Gp-Cab -Open Rops
| 12***83 | Sheet As | 1 |
| 12***85 | Sheet As | 1 |
| 12***35 | Sheet As | 1 |
235-6875 Skirt Gp-Cab -Open Rops
| 23***75 | Skirt Group-Cab; -Open Rops | 1 |
| 23***66 | Sheet As | 1 |
| 23***67 | Sheet As | 1 |
118-0808 Support Gp-Seat
| 11***08 | Support Group-Seat | 1 |
| 11***10 | Cover Assem. | 1 |
| 7T***99 | Link | 2 |
191-2933 Suspension Gp-Seat -Air
| 10***03 | Fastener | 33 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
108-4082 Suspension Gp-Seat -Contour
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
107-4641 Visor Gp-Cab
| 10***41 | Visor Group-Cab | 1 |
| 6V***32 | Nut-Weld (M6x6 Thd); (M10x1.5) (Weld) | 2 |
| 9R***03 | Plate | 2 |
152-2764 Washer Gp-Window
| 15***63 | Reservoir; (Window Washer) | 1 |
| 15***64 | Washer Group-Window | 1 |
| 7T***90 | Pump As; (Washer) | 2 |
131-1236 Washer Gp-Window
| 13***36 | Washer Group-Window | 1 |
| 13***37 | Bracket Assem. | 1 |
| 13***38 | Bracket As | 1 |
180-3871 Window Gp-Door -Sliding
| 13***70 | Seal; (326-cm) | 0 |
| 14***69 | Stop | 1 |
| 15***15 | Gasket | 1 |
180-2535 Window Gp-Door -Cab
| 13***70 | Seal; (326-cm) | 0 |
| 14***69 | Stop | 1 |
| 15***15 | Gasket | 1 |
107-4628 Wiper Gp-Window
| 10***28 | Wiper Group-Window | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 15***79 | Wiper Arm Pivot Group | 1 |
Power Train
6d-0337 Valve Gp-Tire
| 2D***28 | Core-Valve | 1 |
| 2D***29 | Grommet | 1 |
| 2D***30 | Washer-Ring | 1 |
294-9436 Axle Ar-Fixed -Front, Limited Slip Differential-Single Disc Brake
| 23***55 | Axle Ar-Fixed; -Front, Limited Slip Differential-Single Disc Brake | 1 |
| 29***36 | Axle Ar-Fixed; -Front, Limited Slip Differential-Single Disc Brake | 1 |
| 30***53 | Cover Group-Access; -Cab Floor | 1 |
203-2770 Axle Ar-Fixed -Front, Limited Slip Differential-Single Disc Brake
| 15***46 | Differential Group-Limited Slip | 1 |
| 16***75 | Brake & Planetary Group; -Single Disc | 2 |
| 20***62 | Gear Group-Bevel & Pinion; -Front | 1 |
289-8975 Axle Ar-Fixed -Front, Standard Differential-Single Disc Brake
| 20***61 | Axle Ar-Fixed; -Front, Standard Differential-Single Disc Brake | 1 |
| 28***75 | Axle Ar-Fixed; -Front, Standard Differential-Single Disc Brake | 1 |
| 30***53 | Cover Group-Access; -Cab Floor | 1 |
289-8976 Axle Ar-Fixed -Front, Standard Differential-Single Disc Brake
| 23***53 | Axle Ar-Fixed; -Front, Standard Differential-Single Disc Brake | 1 |
| 28***76 | Axle Ar-Fixed; -Front, Standard Differential-Single Disc Brake | 1 |
| 30***53 | Cover Group-Access; -Cab Floor | 1 |
234-4255 Axle Ar-Fixed -Front, Limited Slip Differential-Single Disc Brake
| 22***25 | Plate Group-Axle Identification | 1 |
| 23***46 | Housing Group-Fixed Axle; -Front | 1 |
| 23***49 | Brake & Planetary Group; -Single Disc | 2 |
289-8978 Axle Ar-Fixed -Front, Limited Slip Differential-Single Disc Brake
| 20***70 | Axle Ar-Fixed; -Front, Limited Slip Differential-Single Disc Brake | 1 |
| 28***78 | Axle Ar-Fixed; -Front, Limited Slip Differential-Single Disc Brake | 1 |
| 30***53 | Cover Group-Access; -Cab Floor | 1 |
234-4253 Axle Ar-Fixed -Front, Standard Differential-Single Disc Brake
| 22***25 | Plate Group-Axle Identification | 1 |
| 23***46 | Housing Group-Fixed Axle; -Front | 1 |
| 23***49 | Brake & Planetary Group; -Single Disc | 2 |
203-2761 Axle Ar-Fixed -Front, Standard Differential-Single Disc Brake
| 15***42 | Differential Group; -Standard | 1 |
| 16***75 | Brake & Planetary Group; -Single Disc | 2 |
| 20***61 | Axle Ar-Fixed; -Front, Standard Differential-Single Disc Brake | 1 |
257-1712 Axle Ar-Fixed -Front, Differential Lock-Single Disc Brake
| 25***39 | Differential Group; -Locking | 1 |
| 25***37 | Control Group-Differential Lock | 1 |
| 25***42 | Gear Group-Bevel & Pinion; -Locking Differential, Front | 1 |
289-8981 Axle Ar-Fixed -Front, Differential Lock-Single Disc Brake
| 25***12 | Axle Ar-Fixed; -Front, Differential Lock-Single Disc Brake | 1 |
| 28***29 | Lines Group-Differential Lock | 1 |
| 28***81 | Axle Ar-Fixed; -Front, Differential Lock-Single Disc Brake | 1 |
289-8990 Axle Ar-Oscillating -Rear, Limited Slip Differential-Single Disc Brake
| 26***78 | Axle Group-Oscillating; -Rear, Limited Slip Differential-Single Disc Brake | 1 |
| 28***18 | Lines Group-Hydraulic Fan; -Without Axle Oil Cooler | 1 |
| 28***90 | Axle Ar-Oscillating; -Rear, Limited Slip Differential-Single Disc Brake | 1 |
267-7380 Axle Ar-Oscillating -Rear, Limited Slip Differential-Dual Disc Brake
| 22***25 | Plate Group-Axle Identification | 1 |
| 23***48 | Housing Group-Oscillating Axle; -Limited Slip Differential, Rear | 1 |
| 23***31 | Differential Group-Limited Slip | 1 |
289-8987 Axle Ar-Oscillating -Rear, Limited Slip Differential-Dual Disc Brake
| 26***80 | Axle Ar-Oscillating; -Rear, Limited Slip Differential-Dual Disc Brake | 1 |
| 28***22 | Lines Group-Axle Oil Cooler | 1 |
| 28***87 | Axle Ar-Oscillating; -Rear, Limited Slip Differential-Dual Disc Brake | 1 |
289-8993 Axle Ar-Oscillating -Rear, Standard Differential-Single Disc Brake
| 26***77 | Axle Group-Oscillating; -Rear, Standard Differential-Single Disc Brake | 1 |
| 28***18 | Lines Group-Hydraulic Fan; -Without Axle Oil Cooler | 1 |
| 28***93 | Axle Ar-Oscillating; -Rear, Standard Differential-Single Disc Brake | 1 |
267-7378 Axle Gp-Oscillating -Rear, Limited Slip Differential-Single Disc Brake
| 22***25 | Plate Group-Axle Identification | 1 |
| 23***47 | Housing Group-Oscillating Axle; -Rear | 1 |
| 23***31 | Differential Group-Limited Slip | 1 |
267-7377 Axle Gp-Oscillating -Rear, Standard Differential-Single Disc Brake
| 22***25 | Plate Group-Axle Identification | 1 |
| 23***47 | Housing Group-Oscillating Axle; -Rear | 1 |
| 23***11 | Differential Group; -Standard | 1 |
267-7417 Brake & Planetary Gp -Single Disc
| 11***27 | Dowel | 3 |
| 13***45 | Pin-Spring | 3 |
| 16***76 | Piston; (Reaction Plate) | 1 |
163-5775 Brake & Planetary Gp -Single Disc
| 11***27 | Dowel | 3 |
| 11***11 | Gear-Sun; (18-Teeth) | 1 |
| 11***12 | Gear-Planetary; (33-Teeth) | 3 |
234-4249 Brake & Planetary Gp -Single Disc
| 11***27 | Dowel | 3 |
| 13***45 | Pin-Spring | 3 |
| 16***76 | Piston; (Reaction Plate) | 1 |
267-7418 Brake & Planetary Gp -Dual Disc
| 11***27 | Dowel | 3 |
| 13***45 | Pin-Spring | 3 |
| 16***76 | Piston; (Reaction Plate) | 1 |
258-6945 Brake & Planetary Gp -Single Disc
| 11***27 | Dowel | 3 |
| 13***45 | Pin-Spring | 3 |
| 16***76 | Piston; (Reaction Plate) | 1 |
177-0018 Case & Parts Gp-Transmission
| 00***69 | Cup-Roller Bearing | 2 |
| 14***80 | Cover | 1 |
| 14***28 | Valve-Relief; (Torque Converter Inlet) | 1 |
239-5608 Case & Parts Gp-Transmission
| 00***69 | Cup-Roller Bearing | 2 |
| 14***80 | Cover | 1 |
| 14***28 | Valve-Relief; (Torque Converter Inlet) | 1 |
190-2914 Clutch Gp -First, Third
| 10***28 | Hub Assem. | 1 |
| 11***71 | Piston | 1 |
| 13***23 | Spring-Wave | 1 |
234-8857 Clutch Gp -First, Third
| 10***28 | Hub Assem. | 1 |
| 11***71 | Piston | 1 |
| 13***23 | Spring-Wave | 1 |
234-8861 Clutch Gp -Reverse, Second
| 10***27 | Hub Assem. | 1 |
| 10***28 | Hub Assem. | 1 |
| 11***70 | Piston | 1 |
234-8854 Clutch Gp -Forward High, Forward Low
| 10***27 | Hub Assem. | 1 |
| 11***70 | Piston | 1 |
| 12***82 | Gear; (37-Teeth) | 1 |
118-4921 Clutch Gp -Forward High, Forward Low
| 10***27 | Hub Assem. | 1 |
| 10***30 | Hub Assem. | 1 |
| 11***70 | Piston | 1 |
118-4918 Clutch Gp -Reverse, Second
| 10***27 | Hub Assem. | 1 |
| 10***28 | Hub Assem. | 1 |
| 11***70 | Piston | 1 |
252-8037 Control Gp-Differential Lock
| 17***47 | Bushing | 1 |
| 17***50 | Spacer; (20x32x8-mm Thk) | 2 |
| 19***52 | Clip-Pin | 2 |
185-1028 Cooler Gp-Axle Oil
| 18***28 | Cooler Group-Axle Oil | 1 |
| 18***39 | Bracket As | 1 |
| 20***52 | Core As-Axle Oil Cooler | 1 |
300-1961 Cover Gp-Shipping -Corrosion Protection
| 03***32 | Strap--Harness Assembly To Compressor | 1 |
| 22***30 | Tag-Warning; (Cylinder Covers) | 1 |
| 30***61 | Cover Group-Shipping; -Corrosion Protection | 1 |
177-0019 Cover Gp-Transmission
| 17***19 | Cover Group-Transmission | 1 |
| 20***45 | Cover | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 4 |
252-7939 Differential Gp -Locking
| 25***30 | Gear-Differential; (20-Teeth) | 1 |
| 25***31 | Gear-Differential; (20-Teeth) | 1 |
| 25***32 | Pinion-Differential | 4 |
235-5811 Differential Gp -Standard
| 21***80 | Washer-Thrust | 4 |
| 23***11 | Differential Group; -Standard | 1 |
| 4E***04 | Case As-Differential | 1 |
151-6142 Differential Gp -Standard
| 15***42 | Differential Group; -Standard | 1 |
| 21***80 | Washer-Thrust | 2 |
| 4E***04 | Case As-Differential | 1 |
236-0931 Differential Gp-Limited Slip
| 10***39 | Gear-Differential Bevel; (14-Teeth)(14 Teeth Ea) | 2 |
| 10***40 | Pinion; (9 Teeth) Ea | 4 |
| 10***42 | Housing-Actuator | 2 |
159-7446 Differential Gp-Limited Slip
| 10***39 | Gear-Differential Bevel; (14-Teeth)(14 Teeth Ea) | 2 |
| 10***40 | Pinion; (9 Teeth) Ea | 4 |
| 10***41 | Shaft-Pinion | 2 |
141-8615 Drive Gp-Flexible Coupling
| 13***93 | Plate | 1 |
| 13***95 | Plate As | 1 |
| 14***15 | Drive Group-Flexible Coupling | 1 |
146-6274 Drive Gp-Pump -Transmission
| 10***99 | Bearing-Ball (88.9mm Id) | 1 |
| 14***21 | Gear-Drive; (72-Teeth) | 1 |
| 14***74 | Drive Group-Pump; -Transmission | 1 |
243-0515 Filler Gp-Power Train Oil
| 11***50 | Tube As | 1 |
| 12***53 | Tube Group | 1 |
| 13***27 | Cap-Fill; (Power Train Oil) | 1 |
118-0849 Filler Gp-Power Train Oil
| 11***49 | Filler Group-Power Train Oil | 1 |
| 11***50 | Tube As | 1 |
| 12***53 | Tube Group | 1 |
203-3894 Filter & Lines Gp-Transmission
| 14***27 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 2 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
235-6807 Filter & Lines Gp-Transmission
| 08***56 | 90 Degrees Elbow | 1 |
| 14***27 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
226-2869 Filter Gp-Oil -Power Train
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 22***69 | Filter Group-Oil; -Power Train | 1 |
304-9464 Gauge Gp-Sight
| 12***53 | Bolt; (M12x1.75x46.5-mm) | 2 |
| 30***64 | Gauge Group-Sight; -Power Train Oil, Oil Seal | 1 |
| 5J***74 | Seal-O-Ring (Id=15.54mm) | 4 |
129-8734 Gauge Gp-Sight -Power Train Oil
| 12***52 | Seal-O-Ring | 4 |
| 12***53 | Bolt; (M12x1.75x46.5-mm) | 2 |
| 12***34 | Gauge Group-Sight; -Power Train Oil | 1 |
236-7495 Gear Gp-Bevel & Pinion -Rear
| 20***58 | . Shoe; Grouser, Spacer; (55.9x76x10.52-mm Thk) | 1 |
| 20***59 | Yoke As, . Shoe; Grouser | 1 |
| 21***25 | Guard | 1 |
252-8442 Gear Gp-Bevel & Pinion -Locking Differential, Front
| 10***02 | Lock-Bearing | 1 |
| 1P***34 | Cup-Roller Bearing (145.0mm Od) | 1 |
| 1P***35 | Cone-Roller Bearing (90.0mm Id) | 1 |
203-2762 Gear Gp-Bevel & Pinion -Front
| 20***56 | Set-Bevel Gear & Pinion | 1 |
| 20***57 | Shaft-Pinion; (14-Teeth) | 1 |
| 20***58 | . Shoe; Grouser, Spacer; (55.9x76x10.52-mm Thk) | 1 |
236-7496 Gear Gp-Bevel & Pinion -Front
| 1K***90 | Cone-Roller Bearing | 1 |
| 1K***91 | Cup Output Shaft Inner; Cup-Output Shaft-Inner | 1 |
| 20***58 | . Shoe; Grouser, Spacer; (55.9x76x10.52-mm Thk) | 1 |
190-2888 Gear Gp-Input Transfer
| 00***71 | Cone-Bearing | 2 |
| 11***83 | Gear; (46-Teeth)(46 Teeth) | 1 |
| 12***81 | Gear; (32-Teeth)(32 Teeth) | 1 |
234-8852 Gear Gp-Input Transfer
| 00***71 | Cone-Bearing | 2 |
| 12***81 | Gear; (32-Teeth)(32 Teeth) | 1 |
| 19***11 | Shaft-Input | 1 |
234-8859 Gear Gp-Output Transfer
| 10***75 | Yoke-Output | 1 |
| 10***76 | Yoke-Brake Flange | 1 |
| 11***58 | Shaft | 1 |
190-2915 Gear Gp-Output Transfer
| 10***75 | Yoke-Output | 1 |
| 10***76 | Yoke-Brake Flange | 1 |
| 11***58 | Shaft | 1 |
203-2763 Housing Gp-Fixed Axle -Front
| 06***12 | Ring-Retaining | 2 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 3 |
| 11***19 | Housing-Fixed Axle; (Outer) | 2 |
252-8449 Housing Gp-Fixed Axle -Locking Differential, Front
| 06***12 | Ring-Retaining | 2 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 3 |
| 18***63 | Plug Group | 1 |
234-4246 Housing Gp-Fixed Axle -Front
| 06***12 | Ring-Retaining | 2 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 3 |
| 19***00 | Seal-Lip Type | 1 |
234-4247 Housing Gp-Oscillating Axle -Rear
| 06***12 | Ring-Retaining | 2 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 3 |
| 12***19 | Support-Trunnion; (Front) | 1 |
234-4248 Housing Gp-Oscillating Axle -Rear
| 06***12 | Ring-Retaining | 2 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 3 |
| 12***19 | Support-Trunnion; (Front) | 1 |
323-1654 Lines Gp-Axle Oil Cooler
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***25 | Tee | 1 |
| 13***84 | Clip | 3 |
289-8922 Lines Gp-Axle Oil Cooler
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***25 | Tee | 1 |
| 13***84 | Clip | 3 |
289-8929 Lines Gp-Differential Lock
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***61 | Elbow Group | 1 |
289-8923 Lines Gp-Torque Conv Cooler
| 12***47 | Valve Group-Bypass; -Power Train Oil Cooler | 1 |
| 14***38 | Elbow | 1 |
| 14***53 | Hose; (272.2-cm) | 0 |
118-0880 Mounting Gp-Axle
| 11***80 | Mounting Group-Axle | 1 |
| 6K***87 | Dowel | 2 |
| 7X***65 | Bolt; (M24x3x180-mm) | 12 |
132-2471 Mounting Gp-Axle
| 13***71 | Mounting Group-Axle | 1 |
| 6K***87 | Dowel | 2 |
| 7X***65 | Bolt; (M24x3x180-mm) | 20 |
147-5071 Mounting Gp-Rim
| 14***71 | Mounting Group-Rim | 1 |
| 8T***67 | Washer-Hard; (26x44x4-mm Thk) | 16 |
| 8T***79 | Bolt-Plt; (M24 X 3.0 X 50) | 16 |
289-8845 Power Train Ar
| 11***49 | Filler Group-Power Train Oil | 1 |
| 12***34 | Gauge Group-Sight; -Power Train Oil | 1 |
| 20***38 | Shaft Group-Drive | 1 |
289-8835 Power Train Ar
| 12***53 | Bolt; (M12x1.75x46.5-mm) | 2 |
| 20***38 | Shaft Group-Drive | 1 |
| 23***07 | Filter & Lines Group-Transmission | 1 |
289-8895 Power Train Ar
| 20***38 | Shaft Group-Drive | 1 |
| 23***07 | Filter & Lines Group-Transmission | 1 |
| 24***15 | Filler Group-Power Train Oil | 1 |
6y-6712 Pump Gp-Transmission -1-Section Gear
| 3T***94 | Bearing-Sleeve | 4 |
| 5H***52 | Seal 5.73 In. (14.55 cm)Inside Dia. | 1 |
| 5M***87 | Dowel (Part Of 1p***81 Assem.) | 2 |
234-8867 Pump Gp-Transmission -1-Section Gear
| 12***83 | Gear-Drive; (68-Teeth) | 1 |
| 19***51 | Shaft | 1 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
234-8803 Pump Gp-Transmission -1-Section Gear
| 23***03 | Pump Group-Transmission; -1-Section Gear | 1 |
| 23***06 | Body As | 1 |
| 23***08 | Gear; (17-Teeth) | 1 |
121-8917 Pump Gp-Transmission -1-Section Gear
| 12***83 | Gear-Drive; (68-Teeth) | 1 |
| 12***17 | Pump Group-Transmission; -1-Section Gear | 1 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
154-5508 Rim Ar
| 14***71 | Mounting Group-Rim | 1 |
| 14***84 | Stop Group-Axle Oscillation | 1 |
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
117-7836 Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 11***39 | Rim Group-Demountable; -1-Piece | 4 |
| 14***71 | Mounting Group-Rim | 1 |
9z-8590 Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 9Z***90 | Rim Ar; -1-Piece | 1 |
117-7837 Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 11***40 | Rim Group-Demountable; -3-Piece | 4 |
| 14***71 | Mounting Group-Rim | 1 |
9z-8589 Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 9Z***89 | Rim Ar; -3-Piece | 1 |
267-5296 Rim As
| 26***91 | Tire As; (59x9x20.5) | 1 |
| 26***95 | Rim As | 1 |
| 26***96 | Rim As | 1 |
186-4943 Rim Gp-Demountable
| 17***06 | Rim Group-Demountable; -3-Piece | 1 |
| 18***43 | Rim Group-Demountable; -3-Piece | 1 |
176-1705 Rim Gp-Demountable
| 17***98 | Flange As | 1 |
| 17***99 | Rim As | 1 |
| 17***18 | Driver | 1 |
2q-5979 Rim Gp-Demountable
| 18***43 | Rim Group-Demountable; -3-Piece | 1 |
| 2Q***79 | Rim Group-Demountable | 1 |
| 4K***79 | Seal-O-Ring | 1 |
117-7839 Rim Gp-Demountable
| 11***39 | Rim Group-Demountable; -1-Piece | 1 |
| 2D***07 | Stud | 1 |
| 2D***08 | Grommmet | 1 |
128-5436 Rim Gp-Demountable
| 10***31 | Rim As | 1 |
| 12***36 | Rim Group-Demountable; -3-Piece | 1 |
| 4K***81 | Ring-Lock; (Lock) | 1 |
117-7840 Rim Gp-Demountable
| 11***40 | Rim Group-Demountable; -3-Piece | 1 |
| 18***42 | Rim Group-Demountable | 1 |
| 4K***79 | Seal-O-Ring | 1 |
186-4942 Rim Gp-Demountable
| 12***36 | Rim Group-Demountable; -3-Piece | 1 |
| 17***05 | Rim Group-Demountable; -3-Piece | 1 |
| 18***42 | Rim Group-Demountable | 1 |
176-1706 Rim Gp-Demountable
| 17***89 | Flange As | 1 |
| 17***18 | Driver | 1 |
| 17***06 | Rim Group-Demountable; -3-Piece | 1 |
238-9593 Shaft Gp-Drive -Front
| 19***40 | Spider & Bearing Group | 1 |
| 23***93 | Shaft Group-Drive; -Front | 1 |
| 23***94 | Universal Joint Group | 1 |
202-4338 Shaft Gp-Drive
| 20***17 | Slip Joint Group; -Center | 1 |
| 20***38 | Shaft Group-Drive | 1 |
| 20***40 | Slip Joint Group; -Rear | 1 |
204-3540 Slip Joint Gp -Rear
| 19***26 | Spider & Bearing Group | 2 |
| 20***40 | Slip Joint Group; -Rear | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
201-9517 Slip Joint Gp -Center
| 19***40 | Spider & Bearing Group | 2 |
| 1K***53 | Fitting (Pressure Relief) | 1 |
| 20***17 | Slip Joint Group; -Center | 1 |
147-5576 Stop Gp-Axle Oscillation
| 14***76 | Stop Group-Axle Oscillation | 1 |
| 14***77 | Block | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 4 |
147-5484 Stop Gp-Axle Oscillation
| 14***84 | Stop Group-Axle Oscillation | 1 |
| 4E***57 | Block; (Oscillation Limiter) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 4 |
230-9666 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 12***51 | Tire; (17.5-25) | 4 |
| 23***66 | Tire & Rim Ar | 1 |
229-4962 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 12***50 | Tire-Tubeless; (17.5-25) | 4 |
| 22***62 | Tire & Rim Ar | 1 |
230-9672 Tire & Rim Ar
| 10***37 | Tire; (20.5 R25*L-2) | 4 |
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 23***72 | Tire & Rim Ar | 1 |
229-4956 Tire & Rim Ar
| 10***35 | Tire; (17.5-R25) | 4 |
| 11***37 | Rim Ar; -3-Piece | 1 |
| 22***56 | Tire & Rim Ar | 1 |
229-4958 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 22***58 | Tire & Rim Ar | 1 |
| 6C***66 | Tire; (17.5 R25*L-2) | 4 |
230-9673 Tire & Rim Ar
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 23***73 | Tire & Rim Ar | 1 |
| 6C***47 | Tire; (20.5 R25*L-3) | 4 |
241-2827 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 24***26 | Tire; (17.5-R25) | 4 |
| 24***27 | Tire & Rim Ar | 1 |
229-4955 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 22***55 | Tire & Rim Ar | 1 |
| 6C***66 | Tire; (17.5 R25*L-2) | 4 |
230-9674 Tire & Rim Ar
| 12***64 | Tire-Tubeless; (20.5-25) | 4 |
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 23***74 | Tire & Rim Ar | 1 |
230-9675 Tire & Rim Ar
| 12***67 | Tire; (20.5-25) | 4 |
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 23***75 | Tire & Rim Ar | 1 |
230-9678 Tire & Rim Ar
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 23***78 | Tire & Rim Ar | 1 |
| 6C***67 | Tire; (20.5-R25) | 4 |
190-8987 Tire & Rim Ar
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 19***85 | Tire; (20.5-R25) | 4 |
| 19***87 | Tire & Rim Ar | 1 |
230-9677 Tire & Rim Ar
| 12***65 | Tire; (20.5x25)(20.5 X 25-12 Ply) | 4 |
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 23***77 | Tire & Rim Ar | 1 |
250-6612 Tire & Rim Ar
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 25***06 | Tire; (600/65-R25) | 4 |
| 25***12 | Tire & Rim Ar | 1 |
255-3620 Tire & Rim Ar
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 25***20 | Tire & Rim Ar | 1 |
| 25***61 | Tire; (20.5-R25) | 4 |
229-4957 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 22***57 | Tire & Rim Ar | 1 |
| 6C***46 | Tire; (17.5-R25) | 4 |
230-9681 Tire & Rim Ar
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 22***39 | Tire; (20.5-R25) | 4 |
| 23***81 | Tire & Rim Ar | 1 |
286-9099 Tire & Rim Ar
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 24***08 | Tire; (20.5-R25) | 4 |
| 28***99 | Tire & Rim Ar | 1 |
254-2399 Tire & Rim Ar
| 14***71 | Mounting Group-Rim | 1 |
| 14***84 | Stop Group-Axle Oscillation | 1 |
| 14***76 | Stop Group-Axle Oscillation | 1 |
230-9676 Tire & Rim Ar
| 12***62 | Tire; (20.5-25) | 4 |
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 23***76 | Tire & Rim Ar | 1 |
230-9667 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 12***50 | Tire-Tubeless; (17.5-25) | 4 |
| 23***67 | Tire & Rim Ar | 1 |
255-3621 Tire & Rim Ar
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 25***21 | Tire & Rim Ar | 1 |
| 25***64 | Tire; (20.5-R25) | 4 |
277-5748 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 24***26 | Tire; (17.5-R25) | 4 |
| 27***48 | Tire & Rim Ar | 1 |
229-4953 Tire & Rim Ar
| 10***35 | Tire; (17.5-R25) | 4 |
| 11***36 | Rim Ar; -1-Piece | 1 |
| 22***53 | Tire & Rim Ar | 1 |
286-9096 Tire & Rim Ar
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 26***03 | Tire; (20.5-R25) | 4 |
| 28***96 | Tire & Rim Ar | 1 |
286-9098 Tire & Rim Ar
| 12***63 | Tire; (20.5-25) | 4 |
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 28***98 | Tire & Rim Ar | 1 |
290-2719 Transmission Ar
| 11***18 | Clutch Group; -Reverse, Second | 1 |
| 11***21 | Clutch Group; -Forward High, Forward Low | 1 |
| 12***17 | Pump Group-Transmission; -1-Section Gear | 1 |
290-2720 Transmission Ar
| 14***15 | Drive Group-Flexible Coupling | 1 |
| 14***74 | Drive Group-Pump; -Transmission | 1 |
| 23***52 | Gear Group-Input Transfer | 1 |
233-7133 Valve & Mtg Gp-Solenoid -Differential Lock-Hydraulic Lockout
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 2 |
| 23***26 | Valve Group-Solenoid; (Hydraulic Lockout) | 1 |
| 23***33 | Valve & Mtg Group-Solenoid; -Differential Lock-Hydraulic Lockout | 1 |
126-0747 Valve Gp-Bypass -Power Train Oil Cooler
| 12***35 | Valve As-Control | 1 |
| 12***47 | Valve Group-Bypass; -Power Train Oil Cooler | 1 |
| 12***48 | Body | 1 |
244-3114 Valve Gp-Modulating -Transmission Clutch
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
177-0026 Valve Gp-Relief -Transmission Hydraulic Control
| 08***56 | 90 Degrees Elbow | 1 |
| 11***50 | Cover | 1 |
| 16***74 | Fitting As-Elbow | 1 |
6i-9806 Valve Gp-Relief -Torque Converter Outlet
| 2L***26 | Ring-Retaining | 1 |
| 2S***82 | Spring | 1 |
| 6I***04 | Spool | 1 |
200-2042 Valve Gp-Transmission Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***14 | Seal-O-Ring | 1 |
| 13***00 | Clip; (Tab) | 2 |
305-0635 Valve Gp-Transmission Control
| 10***14 | Seal-O-Ring | 1 |
| 12***01 | Clip | 2 |
| 13***00 | Clip; (Tab) | 2 |
200-2043 Valve Gp-Transmission Control
| 13***52 | Sensor Group-Temperature; -Transmission Oil-Xmsn, Torque Converter | 1 |
| 17***26 | Valve Group-Relief; -Transmission Hydraulic Control | 1 |
| 20***43 | Valve Group-Transmission Control | 1 |
Service Equipment And Supplies
114-9342 Chock Gp-Wheel
| 11***42 | Chock Group-Wheel | 1 |
293-4931 Film Gp
| 25***61 | Film-Information; (Cat Power, Acert Technology) | 2 |
| 29***19 | Film-Stripe; (Filler, Hood) | 2 |
| 29***25 | Film-Stripe; (928h, Cat, Lh) | 1 |
293-4932 Film Gp
| 25***61 | Film-Information; (Cat Power, Acert Technology) | 2 |
| 29***19 | Film-Stripe; (Filler, Hood) | 2 |
| 29***27 | Film-Stripe; (930h, Cat, Lh) | 1 |
290-6493 Film Gp-International -Versalink
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 2 |
| 15***90 | Film-Identification; (Water Separator) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
290-6492 Film Gp-International -Z-Bar Linkage
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 2 |
| 15***90 | Film-Identification; (Water Separator) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
290-6489 Film Gp-U.S. -Z-Bar Linkage
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 2 |
| 15***90 | Film-Identification; (Water Separator) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
290-6490 Film Gp-U.S. -Versalink
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 2 |
| 15***90 | Film-Identification; (Water Separator) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
289-8941 Plate & Film Gp -International, Z-Bar Linkage
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 19***13 | Plug; (Protection) | 8 |
| 19***14 | Plug; (Protection) | 39 |
289-8942 Plate & Film Gp -International, Versalink
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 17***09 | Film-Instruction; (Remote Grease Points) | 1 |
| 17***12 | Film-Instruction; (Remote Grease Point Locations) | 1 |
Steering System
235-7195 Cylinder & Mtg Gp-Steering
| 13***53 | Pin | 2 |
| 14***71 | Pin As | 2 |
| 23***95 | Cylinder & Mtg Group-Steering | 1 |
118-0899 Cylinder & Mtg Gp-Steering
| 11***99 | Cylinder & Mtg Group-Steering | 1 |
| 12***73 | Cylinder Group-Hydraulic; -Side Dump Bucket | 1 |
| 12***74 | Cylinder Group-Hydraulic; -Steering, Lh | 1 |
125-0373 Cylinder Gp-Hydraulic -Steering, Rh
| 12***73 | Cylinder Group-Hydraulic; -Side Dump Bucket | 1 |
| 12***75 | Cylinder As; (Rh) | 1 |
| 16***86 | Seal As-Buffer | 1 |
125-0374 Cylinder Gp-Hydraulic
| 12***74 | Cylinder Group-Hydraulic; -Steering, Lh | 1 |
| 12***76 | Cylinder As; (Lh) | 1 |
| 16***86 | Seal As-Buffer | 1 |
237-9271 Cylinder Gp-Steering
| 14***68 | Piston | 1 |
| 16***86 | Seal As-Buffer | 1 |
| 16***94 | Seal-U-Cup | 1 |
289-8910 Lines Gp-Secondary Steering
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***28 | Connector | 1 |
| 11***27 | Hose Assem. | 1 |
289-8932 Lines Gp-Secondary Steering
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***11 | Tee-O-Ring Port | 1 |
| 13***84 | Clip | 1 |
290-7230 Lines Gp-Steering -Standard
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 11***28 | Connector | 1 |
| 11***27 | Hose Assem. | 1 |
212-4656 Lines Gp-Steering -Standard
| 13***26 | Hose As | 1 |
| 14***16 | Connector Group | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 3 |
290-7218 Lines Gp-Steering -Quick Steer
| 11***55 | Hose As | 2 |
| 14***25 | Connector As. | 3 |
| 14***68 | Elbow Group | 3 |
290-7196 Lines Gp-Steering -Quick Steer
| 11***55 | Hose As | 2 |
| 14***25 | Connector As. | 3 |
| 14***51 | Elbow Group | 1 |
293-2470 Pump & Motor Gp-Sec Steering -Electric Drive
| 09***94 | Ring-Retaining | 1 |
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 16***14 | Gasket | 1 |
289-8966 Steering Ar -Quick Steer
| 25***71 | Kit-Seal; (Metering Pump, Steering) | 1 |
| 28***45 | Pump Group-Metering; (Hmu, Quick Steer) | 1 |
| 28***66 | Steering Ar; -Quick Steer | 1 |
289-8968 Steering Ar-Secondary -Secondary Steering
| 28***32 | Lines Group-Secondary Steering | 1 |
| 28***68 | Steering Ar-Secondary; -Secondary Steering | 1 |
| 29***19 | Wiring Group-Secondary Steering | 1 |
289-8970 Steering Ar-Secondary -Quick Steer
| 25***71 | Kit-Seal; (Metering Pump, Steering) | 1 |
| 28***45 | Pump Group-Metering; (Hmu, Quick Steer) | 1 |
| 28***10 | Lines Group-Secondary Steering | 1 |
289-8969 Steering Ar-Secondary -Secondary Steering
| 25***71 | Kit-Seal; (Metering Pump, Steering) | 1 |
| 28***10 | Lines Group-Secondary Steering | 1 |
| 28***69 | Steering Ar-Secondary; -Secondary Steering | 1 |
294-9441 Steering Ar-Standard
| 21***56 | Lines Group-Steering; -Standard | 1 |
| 29***03 | Battery & Wiring Group; -Steering | 1 |
| 29***41 | Steering Ar-Standard | 1 |
294-9434 Steering Ar-Standard
| 25***71 | Kit-Seal; (Metering Pump, Steering) | 1 |
| 29***03 | Battery & Wiring Group; -Steering | 1 |
| 29***30 | Lines Group-Steering; -Standard | 1 |
319-1625 Steering Column Gp-Adjustable -Tilt
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
280-6837 Steering Column Gp-Adjustable
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
247-4503 Valve & Mtg Gp-Solenoid -Quick Steer
| 24***02 | Valve Group-Solenoid; -24-Volt | 1 |
| 24***03 | Valve & Mtg Group-Solenoid; -Quick Steer | 1 |
8j-6875 Valve Gp-Shuttle
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 4B***84 | Ball | 1 |
| 4T***05 | Adapter | 2 |
202-1233 Valve Gp-Pilot Cartridge
| 14***19 | Retainer | 1 |
| 15***25 | Plug-Stop | 1 |
| 15***26 | Spring; (Small) | 1 |
212-4963 Valve Gp-Pilot Cartridge
| 14***19 | Retainer | 1 |
| 15***25 | Plug-Stop | 1 |
| 15***26 | Spring; (Small) | 1 |
212-4962 Valve Gp-Pilot Cartridge
| 14***19 | Retainer | 1 |
| 15***25 | Plug-Stop | 1 |
| 15***26 | Spring; (Small) | 1 |
247-4502 Valve Gp-Solenoid
| 10***08 | Kit-Seal; (Solenoid Valve, Quick Steer) | 1 |
| 24***02 | Valve Group-Solenoid; -24-Volt | 1 |
| 25***48 | Coil As; (24-Volt) | 1 |
Work Tools
116-9713 Adapter Gp-Tip
| 11***13 | Adapter Group-Tip | 1 |
| 1U***57 | Adapter-Strap | 6 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 4 |
229-9714 Arm Gp-Material Handling
| 1K***70 | Nut (National Coarse) | 1 |
| 22***14 | Arm Group-Material Handling | 1 |
| 22***15 | Base As | 1 |
256-8882 Bucket Ar-General Purpose -Quick Coupler
| 14***73 | Plate As | 1 |
| 22***59 | Bucket Group-General Purpose; -Quick Coupler | 1 |
| 25***82 | Bucket Ar-General Purpose; -Quick Coupler | 1 |
300-6795 Bucket Ar-General Purpose
| 14***73 | Plate As | 1 |
| 29***60 | Edge Group-Cutting | 1 |
| 30***95 | Bucket Ar-General Purpose | 1 |
239-7001 Bucket Ar-General Purpose -Quick Coupler
| 14***73 | Plate As | 1 |
| 23***01 | Bucket Ar-General Purpose; -Quick Coupler | 1 |
| 24***18 | Bucket As-General Purpose; -Quick Coupler | 1 |
239-7003 Bucket Ar-General Purpose
| 14***73 | Plate As | 1 |
| 14***00 | Mounting Group-Bucket | 1 |
| 23***03 | Bucket Ar-General Purpose | 1 |
256-8910 Bucket Ar-General Purpose
| 14***73 | Plate As | 1 |
| 14***00 | Mounting Group-Bucket | 1 |
| 25***10 | Bucket Ar-General Purpose | 1 |
252-6909 Bucket Ar-General Purpose
| 14***73 | Plate As | 1 |
| 14***00 | Mounting Group-Bucket | 1 |
| 25***09 | Bucket Ar-General Purpose | 1 |
256-8881 Bucket Ar-General Purpose -Quick Coupler
| 14***73 | Plate As | 1 |
| 22***59 | Bucket Group-General Purpose; -Quick Coupler | 1 |
| 25***81 | Bucket Ar-General Purpose; -Quick Coupler | 1 |
256-8898 Bucket Ar-General Purpose
| 14***73 | Plate As | 1 |
| 14***00 | Mounting Group-Bucket | 1 |
| 25***98 | Bucket Ar-General Purpose | 1 |
256-8911 Bucket Ar-General Purpose
| 14***73 | Plate As | 1 |
| 14***00 | Mounting Group-Bucket | 1 |
| 25***11 | Bucket Ar-General Purpose | 1 |
256-8897 Bucket Ar-General Purpose
| 14***73 | Plate As | 1 |
| 14***00 | Mounting Group-Bucket | 1 |
| 25***97 | Bucket Ar-General Purpose | 1 |
256-8889 Bucket Ar-General Purpose -Quick Coupler
| 14***73 | Plate As | 1 |
| 25***89 | Bucket Ar-General Purpose; -Quick Coupler | 1 |
| 25***90 | Bucket Group-General Purpose; -Quick Coupler | 1 |
241-0934 Bucket Ar-General Purpose -Quick Coupler
| 14***73 | Plate As | 1 |
| 24***34 | Bucket Ar-General Purpose; -Quick Coupler | 1 |
| 24***36 | Bucket Group-General Purpose; -Quick Coupler | 1 |
241-0935 Bucket Ar-General Purpose -Quick Coupler
| 14***73 | Plate As | 1 |
| 24***35 | Bucket Ar-General Purpose; -Quick Coupler | 1 |
| 24***36 | Bucket Group-General Purpose; -Quick Coupler | 1 |
252-6903 Bucket Ar-Light Material
| 14***73 | Plate As | 1 |
| 14***00 | Mounting Group-Bucket | 1 |
| 25***03 | Bucket Ar-Light Material | 1 |
251-5411 Bucket Ar-Light Material -Quick Coupler
| 14***73 | Plate As | 1 |
| 25***11 | Bucket Ar-Light Material; -Quick Coupler | 1 |
| 25***13 | Bucket Group-Light Material; -Quick Coupler | 1 |
251-5412 Bucket Ar-Light Material -Quick Coupler
| 14***73 | Plate As | 1 |
| 25***12 | Bucket Ar-Light Material; -Quick Coupler | 1 |
| 25***13 | Bucket Group-Light Material; -Quick Coupler | 1 |
241-0923 Bucket Ar-Light Material -Quick Coupler
| 14***73 | Plate As | 1 |
| 24***20 | Bucket As-Light Material; -Quick Coupler | 1 |
| 24***23 | Bucket Ar-Light Material; -Quick Coupler | 1 |
292-9188 Bucket Ar-Multipurpose -Quick Coupler
| 11***13 | Adapter Group-Tip | 1 |
| 29***88 | Bucket Ar-Multipurpose; -Quick Coupler | 1 |
| 29***90 | Bucket Ar-Multipurpose; -Quick Coupler | 1 |
292-9190 Bucket Ar-Multipurpose -Quick Coupler
| 26***22 | Cylinder Group-Multipurpose Bukt | 2 |
| 28***95 | Lines Group-Bucket; -Multipurpose | 1 |
| 29***90 | Bucket Ar-Multipurpose; -Quick Coupler | 1 |
311-1471 Bucket Ar-Multipurpose -Quick Coupler
| 31***71 | Bucket Ar-Multipurpose; -Quick Coupler | 1 |
| 31***72 | Bucket Group-Multipurpose; -Quick Coupler | 1 |
| 8E***66 | Edge Group-Cutting | 1 |
311-1473 Bucket Ar-Multipurpose -Quick Coupler
| 11***13 | Adapter Group-Tip | 1 |
| 31***72 | Bucket Group-Multipurpose; -Quick Coupler | 1 |
| 31***73 | Bucket Ar-Multipurpose; -Quick Coupler | 1 |
292-9189 Bucket Ar-Multipurpose -Quick Coupler
| 29***89 | Bucket Ar-Multipurpose; -Quick Coupler | 1 |
| 29***90 | Bucket Ar-Multipurpose; -Quick Coupler | 1 |
| 8E***66 | Edge Group-Cutting | 1 |
256-8913 Bucket As-General Purpose
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 25***69 | Plate As | 1 |
| 25***70 | Plate As | 1 |
252-6911 Bucket As-General Purpose
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 14***01 | Hinge As; (Tilt, Rh)(Rh Inner) | 1 |
| 14***02 | Hinge As; (Tilt, Lh)(Lh Inner) | 1 |
243-2450 Bucket As-General Purpose
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 16***22 | Hinge As; (Lift, Outer, Rh)(Lh Inner) | 1 |
| 16***24 | Hinge As; (Lift, Outer, Lh)(Lh Outer) | 1 |
256-8865 Bucket As-General Purpose -Quick Coupler
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 25***65 | Bucket As-General Purpose; -Quick Coupler | 1 |
| 25***69 | Plate As | 1 |
307-3796 Bucket As-General Purpose
| 2C***59 | Plate-Identification; (Cat) | 1 |
| 30***96 | Bucket As-General Purpose | 1 |
| 30***03 | .. Cyl., Plate As; (Lh), Cylinder | 1 |
241-0937 Bucket As-General Purpose -Quick Coupler
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 15***10 | Plate As; (Rh) | 1 |
| 15***11 | Plate As; (Lh) | 1 |
256-8900 Bucket As-General Purpose
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 22***10 | Plate As; (Lh) | 1 |
| 22***18 | Plate As; (Rh) | 1 |
256-8864 Bucket As-General Purpose -Quick Coupler
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***64 | Bucket As-General Purpose; -Quick Coupler | 1 |
223-9730 Bucket As-General Purpose
| 11***02 | Hinge As; (Outer Lh) | 1 |
| 11***03 | Hinge As; (Inner Lh) | 1 |
| 11***04 | Hinge As; (Inner Rh) | 1 |
241-0918 Bucket As-General Purpose -Quick Coupler
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 24***18 | Bucket As-General Purpose; -Quick Coupler | 1 |
119-1799 Bucket As-General Purpose
| 11***99 | Bucket As-General Purpose | 1 |
| 11***02 | Hinge As; (Outer Lh) | 1 |
| 11***03 | Hinge As; (Inner Lh) | 1 |
243-2452 Bucket As-General Purpose
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 24***50 | Bucket As-General Purpose | 1 |
244-3649 Bucket As-General Purpose -Quick Coupler
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 16***16 | Plate | 2 |
| 24***49 | Bucket As-General Purpose; -Quick Coupler | 1 |
256-8891 Bucket As-General Purpose -Quick Coupler
| 25***91 | Bucket As-General Purpose; -Quick Coupler | 1 |
| 25***95 | Plate As; (Lh) | 1 |
| 25***96 | Plate As; (Rh) | 1 |
241-0920 Bucket As-Light Material -Quick Coupler
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 24***20 | Bucket As-Light Material; -Quick Coupler | 1 |
251-5414 Bucket As-Light Material -Quick Coupler
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 16***16 | Plate | 2 |
| 17***26 | Plate As; (Lh) | 1 |
241-0926 Bucket As-Light Material -Quick Coupler
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 16***16 | Plate | 2 |
| 24***26 | Bucket As-Light Material; -Quick Coupler | 1 |
252-6905 Bucket As-Light Material
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 14***01 | Hinge As; (Tilt, Rh)(Rh Inner) | 1 |
| 14***02 | Hinge As; (Tilt, Lh)(Lh Inner) | 1 |
256-8912 Bucket Gp-General Purpose
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***12 | Bucket Group-General Purpose | 1 |
252-6910 Bucket Gp-General Purpose
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***10 | Bucket Group-General Purpose | 1 |
256-8863 Bucket Gp-General Purpose -Quick Coupler
| 14***73 | Plate As | 1 |
| 25***63 | Bucket Group-General Purpose; -Quick Coupler | 1 |
| 25***64 | Bucket As-General Purpose; -Quick Coupler | 1 |
256-8899 Bucket Gp-General Purpose
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***99 | Bucket Group-General Purpose | 1 |
256-8890 Bucket Gp-General Purpose -Quick Coupler
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***90 | Bucket Group-General Purpose; -Quick Coupler | 1 |
241-0936 Bucket Gp-General Purpose -Quick Coupler
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 24***36 | Bucket Group-General Purpose; -Quick Coupler | 1 |
239-7002 Bucket Gp-General Purpose -Quick Coupler
| 14***73 | Plate As | 1 |
| 23***02 | Bucket Group-General Purpose; -Quick Coupler | 1 |
| 24***18 | Bucket As-General Purpose; -Quick Coupler | 1 |
224-0759 Bucket Gp-General Purpose -Quick Coupler
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 22***34 | Bucket As-General Purpose; -Quick Coupler | 1 |
| 22***59 | Bucket Group-General Purpose; -Quick Coupler | 1 |
297-4103 Bucket Gp-General Purpose
| 13***55 | Setscrew; (M4x0.7x8-mm) | 2 |
| 29***03 | Bucket Group-General Purpose | 1 |
| 30***96 | Bucket As-General Purpose | 1 |
300-6796 Bucket Gp-General Purpose
| 22***10 | Plate As; (Lh) | 1 |
| 22***18 | Plate As; (Rh) | 1 |
| 2C***59 | Plate-Identification; (Cat) | 2 |
230-7486 Bucket Gp-General Purpose
| 1U***52 | Tip (Long) | 10 |
| 23***86 | Bucket Group-General Purpose | 1 |
239-7004 Bucket Gp-General Purpose
| 14***73 | Plate As | 1 |
| 14***00 | Mounting Group-Bucket | 1 |
| 23***04 | Bucket Group-General Purpose | 1 |
251-5413 Bucket Gp-Light Material -Quick Coupler
| 25***13 | Bucket Group-Light Material; -Quick Coupler | 1 |
| 25***14 | Bucket As-Light Material; -Quick Coupler | 1 |
252-6904 Bucket Gp-Light Material
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***04 | Bucket Group-Light Material | 1 |
241-0916 Bucket Gp-Light Material -Quick Coupler
| 14***73 | Plate As | 1 |
| 24***16 | Bucket Group-Light Material; -Quick Coupler | 1 |
| 24***20 | Bucket As-Light Material; -Quick Coupler | 1 |
311-1472 Bucket Gp-Multipurpose -Quick Coupler
| 26***22 | Cylinder Group-Multipurpose Bukt | 2 |
| 28***95 | Lines Group-Bucket; -Multipurpose | 1 |
| 31***72 | Bucket Group-Multipurpose; -Quick Coupler | 1 |
311-1474 Bucket Gp-Multipurpose -Quick Coupler
| 09***20 | Pin-Cotter | 4 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
292-9191 Bucket Gp-Multipurpose -Quick Coupler
| 09***20 | Pin-Cotter | 4 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
6w-8832 Carriage As-Fork -Quick Coupler
| 16***89 | Tack-Fastener | 4 |
| 25***09 | Plate-Instruction | 1 |
| 6W***32 | Carriage As-Fork; -Quick Coupler | 1 |
257-2506 Carriage Gp-Fork -Wide Coupler
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***06 | Carriage Group-Fork; -Wide Coupler | 1 |
6i-8311 Corner
| 6I***11 | Corner | 1 |
| 6I***13 | Corner; (Cast, Rh)(Casting) | 1 |
| 6I***15 | Corner; (Forged, Rh)(Forging) | 1 |
6i-8310 Corner
| 6I***10 | Corner-Lh | 1 |
| 6I***12 | Corner; (Cast, Lh) | 1 |
| 6I***14 | Corner; (Forged, Lh) | 1 |
303-2048 Coupler Ar-Quick -Standard Lift Machines
| 14***27 | Cylinder & Mtg Group-Coupler | 1 |
| 23***00 | Coupler Group-Quick | 1 |
| 29***70 | Lines Group-Coupler; -Standard Lift Machines | 1 |
304-4311 Coupler Ar-Quick -Standard
| 14***27 | Cylinder & Mtg Group-Coupler | 1 |
| 23***00 | Coupler Group-Quick | 1 |
| 24***16 | Lines Group-Coupler; -Third Function, Lower | 1 |
294-9438 Coupler Ar-Quick
| 25***37 | Coupler Group-Quick | 1 |
| 29***05 | Lines Group-Coupler | 1 |
| 29***38 | Coupler Ar-Quick | 1 |
294-9437 Coupler Ar-Quick
| 19***79 | Cylinder & Mtg Group-Coupler | 1 |
| 22***52 | Coupler Group-Quick | 1 |
| 29***05 | Lines Group-Coupler | 1 |
348-6002 Coupler Gp-Quick
| 13***19 | Pin As | 2 |
| 13***27 | Pin As | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
223-6352 Coupler Gp-Quick
| 22***52 | Coupler Group-Quick | 1 |
| 22***53 | Frame As-Coupler | 1 |
| 23***27 | Cover As | 1 |
253-2137 Coupler Gp-Quick
| 25***37 | Coupler Group-Quick | 1 |
| 25***90 | Frame Group-Quick Coupler | 1 |
| 25***57 | Hose As | 2 |
304-1061 Coupler Gp-Quick
| 13***19 | Pin As | 2 |
| 13***27 | Pin As | 1 |
| 13***35 | Plate | 1 |
235-7400 Coupler Gp-Quick
| 13***19 | Pin As | 2 |
| 13***27 | Pin As | 1 |
| 13***35 | Plate | 1 |
251-5418 Edge Gp-Cutting
| 25***17 | Edge-Cutting | 1 |
| 25***18 | Edge Group-Cutting; -Rubber | 1 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 8 |
8e-4566 Edge Gp-Cutting
| 1J***07 | Bolt 6.99cm (2.75 In.) Long | 10 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 10 |
| 4T***91 | End Bit; (End) | 2 |
299-5360 Edge Gp-Cutting
| 1J***07 | Bolt 6.99cm (2.75 In.) Long | 13 |
| 1U***64 | Cutting Edge (End) | 2 |
| 1U***65 | Cutting Edge (Center) | 1 |
350-7197 Edge Gp-Cutting
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 14 |
| 33***99 | Edge-Segment; (Rh) | 1 |
| 33***00 | Edge-Segment; (Lh) | 1 |
350-7196 Edge Gp-Cutting
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 14 |
| 31***51 | Edge-Segment; (Rh) | 1 |
| 31***52 | Edge-Segment; (Lh) | 1 |
8e-4568 Edge Gp-Segment
| 1J***07 | Bolt 6.99cm (2.75 In.) Long | 14 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 14 |
| 8E***68 | Edge Group-Segment | 1 |
195-6935 Fork Gp-Pallet -Rh
| 19***35 | Fork Group-Pallet; -Rh | 1 |
| 19***61 | Insert | 1 |
| 22***24 | Positioner Group-Work Tool; (Fork) | 1 |
241-0922 Fork Gp-Pallet -Lh
| 09***37 | Service Group-Fork Positioner | 1 |
| 09***64 | Pin (Class Iii) | 1 |
| 09***65 | Lever | 1 |
195-6938 Fork Gp-Pallet -Lh
| 19***38 | Fork Group-Pallet; -Lh | 1 |
| 19***61 | Insert | 1 |
| 22***24 | Positioner Group-Work Tool; (Fork) | 1 |
241-0921 Fork Gp-Pallet -Rh
| 09***37 | Service Group-Fork Positioner | 1 |
| 09***64 | Pin (Class Iii) | 1 |
| 09***65 | Lever | 1 |
300-6830 Fork Gp-Pallet
| 12***76 | Hydraulic Connector; Tube Fitting, Hydraulic Connector, Clamp As | 4 |
| 15***11 | Lockwasher | 4 |
| 30***16 | Shaft | 1 |
172-3228 Fork Gp-Pallet -Fork
| 17***28 | Fork Group-Pallet; -Fork | 1 |
303-0397 Fork Gp-Pallet
| 12***76 | Hydraulic Connector; Tube Fitting, Hydraulic Connector, Clamp As | 4 |
| 15***11 | Lockwasher | 4 |
| 30***16 | Shaft | 1 |
254-0090 Frame Gp-Quick Coupler
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 17***45 | Pin | 2 |
| 18***48 | Plate-Stop | 1 |
142-8463 Guard Gp-Bucket -Tooth Tip
| 10***43 | Plate As | 2 |
| 10***69 | Plate As | 1 |
| 14***63 | Guard Group-Bucket; -Tooth Tip | 1 |
326-1575 Hook Gp-Coupler
| 32***75 | Hook Group-Coupler | 1 |
148-7900 Mounting Gp-Bucket
| 14***86 | Shim; (3.18-mm Thk) | 2 |
| 14***87 | Shim; (6.35-mm Thk) | 2 |
| 14***03 | Pin As | 2 |
318-2467 Pin Gp-Fork -Anti-Swing
| 31***57 | Pin As | 2 |
| 31***67 | Pin Group-Fork; -Anti-Swing | 1 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 2 |
326-1572 Plate Ar-Bucket
| 32***72 | Plate Ar-Bucket | 1 |
178-0470 Protector Gp-Linkage
| 14***03 | Pin As | 2 |
| 14***06 | Pin As, Seal | 1 |
| 17***65 | Support As | 1 |
9j-3169 Tip Gp-Long
| 13***63 | Pin-G.E.T. | 1 |
| 14***33 | Retainer As; (G.E.T.) | 1 |
| 1U***52 | Tip (Long) | 1 |
9w-8142 Tip Gp-Long
| 9J***69 | Tip Group-Long; -J-250 | 8 |
| 9W***42 | Tip Group-Long | 1 |
9j-3178 Tip Gp-Short
| 13***63 | Pin-G.E.T. | 1 |
| 14***33 | Retainer As; (G.E.T.) | 1 |
| 1U***51 | Tip (Short) | 1 |
9w-8143 Tip Gp-Short
| 9J***78 | Tip Group-Short; -J-250 | 8 |
| 9W***43 | Tip Group-Short | 1 |
930H serial number reference
The PIN plate on a 930H is mounted on the right side of the main loader frame near the articulation joint/cab step area, with the number also stamped into the frame itself as a backup. Read the full stamped ID as CAT0930Hxxxxxxxxx: after the CAT0930H model block and a configuration letter comes the 3-character serial prefix (e.g. DHC, FTD), then a 5-digit sequence number that tracks the individual machine within that prefix break. The prefix identifies which parts book/manual set and running-change break the machine belongs to, not necessarily a build year by itself.
| Prefix | Identifies | Notes |
|---|---|---|
| DHC | 930H standard/Integrated Tool Carrier wheel loader | Most common 930H prefix. Confirmed on real units (PIN format CAT0930HxDHC0xxxx, 2008-2009 builds). Cat's parts and service manual set groups this break together with the 928HZ under one shared book (928HZ/930H Wheel Loader, DHC00001 and up) since both models share a common frame and documentation set, but PIN records confirm these are true 930H machines. Fitted with the Cat C6.6 ACERT diesel, Tier 3 emissions, rated net power about 111 kW (149 hp). Covers both standard bucket loader and Integrated Tool Carrier configuration. |
| FTD | 930H wheel loader | Second confirmed 930H break. Real unit on record with PIN ending FTD01007. Also grouped with 928HZ in the shared parts/service manual set (928HZ/930H Wheel Loader, FTD00001 and up), same as the DHC break. Same C6.6 ACERT engine, Tier 3, about 111 kW (149 hp) net. |
Frequently asked questions
What engine does the Caterpillar 930H use?
The 930H runs a Cat C6.6 ACERT six-cylinder turbocharged diesel meeting Tier 3/Stage IIIA emissions, rated 111 kW (149 hp) net. The later 930K kept the same C6.6 engine family but stepped up to 119 kW (160 hp) under Tier 4 Interim rules, so confirm which generation you're looking at by serial prefix before ordering parts.
What is the operating weight of the Caterpillar 930H?
Base operating weight lists at 13,029 kg (28,725 lb). Actual weight varies by configuration: bucket type and size, counterweight, tire choice, and attachments like forks or a quick coupler all move the number, so treat this as a starting point, not a fixed figure.
What replaced the Caterpillar 930H?
The Cat 930K replaced the 930H. It carries the same C6.6 ACERT engine family stepped up to 119 kW (160 hp), meets Tier 4 Interim emissions with passive regeneration, and swaps the 930H's powershift transmission for a stepless hydrostatic drive.
What 930H owners discuss
What do owners say about cold-start behavior on the 930H's C6.6 ACERT engine?
Owners report the C6.6 ACERT-powered 930H cranks but won't fire below about 4°C (40°F), while it starts and runs normally once ambient temperature climbs above that mark. Running a block heater for a few hours before startup is the common field workaround. If a block heater doesn't cure a cold no-start, treat it as a cold-start aid circuit, battery, or fuel supply fault and pull a diagnostic scan rather than repeated cranking.
Is a tick or knock noise from the C6.6 ACERT normal once the engine is warm?
Owners describe a light tick that only shows up once the engine is fully warm, in one case appearing right after a full injector change. Field diagnosis favors checking valve lash both cold and hot, plus tappet/pushrod contact and camshaft lobe condition, since a heat-dependent tick doesn't always trace back to lash alone. Factory service intervals call for a valve adjustment at 500 hours on a new or overhauled engine and every 1000 hours after. A tick that persists outside that window deserves attention before it turns into a top-end repair; have your dealer verify valve lash and camshaft condition.
Why would a 930H die or stall when curling or dumping the bucket at full lift height?
Owners report the engine choking out specifically when the loader arm reaches full extension or dump height, even after fresh fuel filters and lines. In one documented case implement pump pressure crept up with no operator command right as the stall hit, and engaging the hydraulic lockout stopped the lift motion, pointing to the main relief valve or pilot control valve rather than fuel delivery. This failure mode can leave a raised load without lift control, so have your dealer verify the main hydraulic relief valve and pilot circuit rather than working around it.
What causes low fuel rail pressure codes on a mid-life 930H?
Owners around the 2,700-hour mark have chased low fuel rail pressure codes through fuel filters, fuel line integrity, the fuel pressure relief valve, and the mechanical lift pump without the fault always clearing. Treat this as a HEUI-family fuel system needing sequential elimination from the supply side through to rail components, not one single common failure point. Plan on a full fuel-system diagnostic pass with the right tool rather than swapping components one at a time.
Ride control on my 930H is intermittent or has stopped working. What's the usual cause?
The usual suspects owners report, in rough order of frequency, are a discharged nitrogen charge in the ride control accumulator, a bad solenoid, and a wiring fault in the ride control circuit. The field check operators use: raise the bucket partway, tilt forward, lower to the ground under continued downward pressure, then try to lift the front wheels; a properly charged accumulator keeps the front wheels planted. Because ride control affects load stability while traveling with a raised bucket, have your dealer verify accumulator charge and valve function rather than just cycling the switch.
What wear patterns show up on the 930H's loader linkage and pins?
The 930H uses the VersaLink loader linkage, a parallel-lift hybrid of Z-bar geometry, and like any pin-and-bushing loader arm, poor lubrication is the top driver of premature wear. Neglected grease intervals lead to galling, where the pin and bushing surfaces friction-weld together; contamination, misalignment, and off-spec replacement bushings all speed up the same wear. Once wear is advanced, the loader frame typically needs to be split at the joint and line-bored back to spec, not a task most owners handle in house. Because worn linkage pins affect load-carrying safety, have your dealer verify pin and bushing clearance at your next inspection.
What should I check before buying a used 930H?
Start with the hour meter reading and confirm the gauges and instrument cluster actually work on startup rather than trusting the number alone. Walk the bucket edge and teeth for wear and damage, check coupler pins and bushings for play if a quick coupler is fitted, and cycle the lift arms and cylinders through full travel watching for drift or binding. Check cab controls, joystick, pedals, seat, for full function, and treat any weld repair or visible damage on the ROPS structure as a walk-away issue, not a negotiating point. The 930H's Tier 3 C6.6 ACERT does not carry a diesel particulate filter, that arrived later with Tier 4 K/M-series machines, so a seller describing forced regens on a genuine 930H is worth questioning before you commit.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 930H part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.