Caterpillarwheel-type loaderwheel loader
Caterpillar 928G
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 928G is a small-to-medium wheel-type loader in Cat's articulated-frame loader line, built roughly from the mid-1990s into the early-to-mid 2000s. Operating weight runs about 11.8 to 12.3 tonnes (26,000 to 27,100 lb) depending on bucket and counterweight configuration. Early production machines used the mechanically governed Cat 3116T direct-injection turbocharged diesel, reported at roughly 93 to 107 kW (125 to 143 hp) at the flywheel depending on source and rating standard. Later production switched to the electronically controlled Cat 3056E DIT ATAAC diesel, rated near 98 kW (131 hp) net and built to meet Tier 2 emissions rules. Standard configuration runs Z-bar loader linkage, a 4-speed-forward/3-speed-reverse powershift transmission with electronic autoshift, and load-sensing hydraulics with separate steering and implement pumps. The 928G sits between the smaller 924-class loaders and the larger 938/950-class machines, replacing the 928F and later giving way to the 928H.
The defining change across 928G production is the engine swap from the mechanically governed 3116T to the electronically controlled 3056E DIT ATAAC, driven by Tier 2 emissions requirements. The later engine adds electronic fuel timing, a roughly 48 percent torque rise for better lugging under load, and a quieter, fully enclosed engine compartment; the cab also gained a redesigned instrument panel with expanded warning and diagnostic functions. Reported bucket capacities and operating weights vary somewhat by source since they depend on the bucket, tires, and counterweight specified at the factory. In the used and parts market, the 928G remains a common, affordably priced loader for yards, quarries, ag operations, and municipal fleets. Its Cat 3116 and 3056 engine families are widely supported by independent rebuilders, and shared design lineage with siblings in the same small-wheel-loader platform keeps replacement components easy to source well after the model left production.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 928G specifications
Engine
| Engine model, early production | Cat 3116T direct injection turbocharged (DIT) diesel, 6-cylinder, mechanically governed |
| Engine model, later production update | Cat 3056E DIT with air-to-air aftercooling (ATAAC), 6-cylinder, electronically controlled; carries a 48% torque rise |
| Displacement | 6.0 L (366 cu in) for both engine builds; bore 100 mm (4.0 in), stroke 127 mm (5.0 in) |
| Power, early 3116T build | Gross approx. 117 kW (157 hp); rated net approx. 93-107 kW (125-143 hp) depending on the rating standard applied; max net approx. 115 kW (155 hp) at 2000 rpm |
| Power, later 3056E build | Rated net approx. 98 kW (131 hp) |
| Emissions | Later 3056E-powered production is stated as meeting Tier 2 nonroad emissions; certification tier for the earlier 3116T-powered production is not documented |
Weights
| Operating weight | approx. 12.3 t (27,100 lb / 12,310 kg) |
| Static tipping load, straight | approx. 9,231 kg (20,351 lb) |
| Static tipping load, full turn | approx. 8,173 kg (18,018 lb) |
Dimensions
| Transport length, bucket on ground | approx. 7.26 m (23.8 ft) |
| Transport width, over tires | approx. 2.44 m (8.0 ft) |
| Transport height, to cab/ROPS top | approx. 3.27-3.29 m (10.7-10.8 ft) |
| Overall height, lift arms fully raised | approx. 5.0 m (16.4 ft) |
| Wheelbase | approx. 2.93 m (9.6 ft) |
| Ground clearance | approx. 0.41-0.43 m (1.4 ft) |
| Hinge pin height, maximum raise | approx. 3.78 m (12.4 ft) |
| Dump clearance at maximum lift, 45 degree dump angle | approx. 2.90 m (9.5 ft); single-sourced, confirm for your specific configuration |
| Standard tire size | 17.5-25, 12 ply rating |
Performance
| Max forward travel speed | 36.7 km/h (22.9 mph) |
| Max reverse travel speed | 24.6 km/h (15.3 mph) |
| Transmission gears | 4 forward / 3 reverse |
| Breakout force | approx. 115 kN (25,849 lbf / 11,725 kgf) |
| Bucket capacity, heaped | varies by bucket configuration: approx. 1.7-2.3 m3 (2.2-3.0 yd3) |
| Outside turning radius, over tires | approx. 5.23 m (206 in) |
| Steering angle | 40 degrees each direction |
| Loader hydraulic cycle times | raise approx. 6.1 sec, dump approx. 1.2 sec, lower (power down) approx. 2.8 sec |
| Implement hydraulic pump flow | approx. 151 L/min (40 gpm); single-sourced, confirm for your specific serial range |
Service capacities (summary)
| Fuel tank | approx. 225-230 L (59-61 US gal) |
| Hydraulic system, total | approx. 125 L (33 US gal) |
| Engine oil, crankcase (with filter) | approx. 15.9 L (4.2 US gal) |
| Cooling system | approx. 42.1 L (11.1 US gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
928G fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - 3116T diesel | 15.9 L (4.2 US gal) | Cat DEO multigrade diesel engine oil. SAE 10W-30 is the preferred grade for this engine family across roughly -18 C to 40 C (0 F to 104 F) ambient. SAE 15W-40 covers warmer ranges up to about 50 C (122 F); SAE 0W or 5W multigrades apply in sustained sub-zero cold with supplemental cold-start heat. |
| Cooling system | 42.1 L (11.1 US gal) | Cat ELC (Extended Life Coolant), factory premix. Extended service life versus conventional coolant; do not mix coolant types in the system. |
| Fuel tank | 224.9 L (59.4 US gal) | Clean, filtered diesel fuel meeting Cat's fuel specification. Keep the tank topped off at the end of each shift to limit condensation. |
| Transmission (powershift) | 34.5 L (9.1 US gal) | Cat TDTO (Transmission/Drive Train Oil), TO-4 spec. SAE 30W covers most operating climates; Arctic-grade TDTO applies in cold-climate service. |
| Front axle (differential and final drives) | 26.2 L (6.9 US gal) | Cat TDTO (TO-4), same grade as the transmission fill for this machine class. |
| Rear axle (differential and final drives) | 25.0 L (6.6 US gal) | Cat TDTO (TO-4), same grade as the transmission fill for this machine class. |
| Hydraulic tank (refill) | 70.1 L (18.5 US gal) | Cat TDTO (TO-4) grade oil, matched to the transmission/axle fill for this machine generation; verify against your specific serial-range OMM before topping off. |
| Hydraulic system total (including tank) | 125.0 L (33.0 US gal) | Cat TDTO (TO-4) grade oil, same as above. |
| Grease (all lubrication points) | Spec only - no reservoir capacity | Cat Multipurpose Grease, NLGI grade 2, lithium-complex base, for general chassis and pin/bushing points. Moly-fortified Cat grease (3Moly/5Moly type) applies where extreme-pressure, high-load pivot points are called out. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 928G maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the 928G beyond the schedule
Predictive Maintenance & Fluid Analysis
Run oil sampling on the engine, transmission, front and rear differentials, and hydraulic tank at every scheduled drain to catch wear before it becomes a failure. Watch transmission oil temperature and torque converter pressure during operation; a slow rise in either points to a failing scavenge pump. On 3056E-equipped machines, pull ECM fault code history at each service to catch injection or aftercooler-related trends early; on 3116T machines, track boost pressure and exhaust temperature by hand instead.
Corrective & Common Repairs
Delayed gear engagement or no forward/reverse pressure usually traces to shift-valve seal wear or a failing torque converter scavenge pump, not the transmission pump. Z-bar loader linkage pins and bushings wear at the bucket and tilt-lever joints under repeated digging; check for play at every service interval, not just when noise appears. Articulation and steering cylinder seals leak with age on high-hour machines; inspect the center-hinge bearings alongside them since both wear together. Turbocharger failure on 3116T-powered machines is often oil-starvation related, so check supply lines first.
Overhaul & Rebuild Points
Front and rear axle planetary final drives and wet-disc brakes are the major powertrain wear items; rebuild once oil samples show metal or brakes lose holding force. Torque converter and transmission clutch packs often wear out before the engine on hard-digging duty; watch for slipping shifts and rising oil temperature as warning signs. Lift, tilt, and steering cylinders need reseal work as rod seals age and weep. Budget an engine inframe overhaul once compression and oil consumption trend down on either the 3116T or 3056E.
Seasonal & Environment Servicing
Cold-weather starts hinge on the engine: check ether-assisted starting aids on the mechanically governed 3116T, and intake air heater function on the electronic 3056E, and confirm coolant antifreeze concentration before winter. Switch to a lower-viscosity hydraulic and transmission oil grade for sustained sub-zero operation. In hot, dusty, or high-altitude quarry and ag work, service the engine air precleaner more often than standard and clean the radiator and turbocharger aftercooler core to prevent overheating. Wash mud from the articulation joint and axle housings regularly to protect seals from abrasive grit.
928G common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 112-6523 | Insert-Fuel Filter | Fuel system service | Check fitment → |
| 1R-0753 | Filter-Fuel | Fuel system service | Check fitment → |
| 1R-0751 | Filter-Fuel | Fuel system service | Check fitment → |
| 117-4089 | Element-Water Separator | Fuel system service | Check fitment → |
| 129-1641 | Film | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
928G fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 641 - FMI 05 | Forward direction solenoid circuit open on the powershift transmission control system. | Broken or unplugged wiring to the forward solenoid, a corroded connector, or a failed solenoid coil. | Inspect the forward solenoid connector and harness for damage, check coil continuity, and confirm the power feed before replacing the solenoid. |
| CID 642 - FMI 05 | Reverse direction solenoid circuit open on the powershift transmission control system. | Broken or unplugged wiring to the reverse solenoid, a corroded connector, or a failed solenoid coil. | Inspect the reverse solenoid connector and harness for damage, check coil continuity, and confirm the power feed before replacing the solenoid. |
| MID 71 - CID 143 - FMI 02 | Transmission neutralizer pressure switch signal is erratic or invalid. | A faulty neutralizer switch, chafed harness wiring, or a damp or corroded connector; can also set if the switch is actuated during a self-check. | With the neutralizer not engaged, check switch continuity and harness wiring per the troubleshooting chart, then repair or replace the switch or harness as needed. |
| CID 168 - FMI 03 / FMI 04 | Charging system (battery) voltage sensed by the control module reads above normal (03) or below normal (04). | A failing alternator or regulator, loose or corroded battery terminals, or a poor ground strap. | Load-test the battery, clean and tighten all grounds and terminals, and check alternator output at idle and at rated engine speed. |
| CID 100 - FMI 03 / FMI 04 | Engine oil pressure sensor signal reads above normal (03) or below normal (04) voltage, an electrical fault separate from an actual pressure event; applies to the later electronically controlled engine. | Damaged sensor wiring, a corroded connector, or a failed oil pressure sensor. | Check sensor wiring and connector condition and verify sensor supply voltage; replace the sensor if wiring tests good, and confirm real oil pressure with a mechanical gauge before returning the machine to service. |
| CID 110 - FMI 03 / FMI 04 | Engine coolant temperature sensor signal reads above normal (03) or below normal (04) voltage; applies to the later electronically controlled engine. | Damaged sensor wiring, a corroded connector, or a failed coolant temperature sensor. | Check sensor wiring and connector condition and verify supply voltage; replace the sensor if wiring tests good, and confirm actual coolant temperature with a hand gauge before returning the machine to service. |
| No CID-FMI - oil pressure / coolant temperature warning lamp | Earlier production used a mechanically governed engine with sender switches driving the instrument-cluster warning lamp and buzzer instead of an electronic diagnostic code. | An actual low oil pressure or high coolant temperature condition, a failed sender switch, or a wiring fault to the instrument cluster. | Verify actual oil pressure and coolant temperature with mechanical gauges first; if readings are normal, check the sender switch and its wiring to the cluster. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
928G attachments & work tools
Series/engine identity note
The 928G (and its companion integrated-toolcarrier version, sold as the IT28G) runs a six-cylinder 3056E direct-injection turbocharged diesel with air-to-air aftercooling. This is a distinct engine from the earlier 928F (3116) and the later 928H (C6.6), so work-tool hydraulic flow and valve options below are scoped to the 3056E-powered G-series chassis only.
General-purpose buckets
Pin-on general-purpose buckets for this size class run roughly 1.9-2.3 m3 (2.5-3.0 yd3) heaped capacity. Exact heaped volume varies with bucket width and whether a base edge or bolt-on cutting edge is fitted, so treat it as a range rather than one fixed figure.
Light-material / high-volume buckets
A higher-volume, lighter bucket is offered for low-density material such as snow, mulch, grain, dry topsoil and similar loads. It mounts the same way as the standard general-purpose bucket but trades breakout force and structural strength for extra volume.
Multi-purpose (4-in-1) buckets
Clamshell-style multi-purpose buckets that grade, dose, clamp, and dig are offered across this small-wheel-loader class. The clamp function needs its own hydraulic circuit beyond the base lift/tilt valve, so it only works once an extra auxiliary valve section is added to the machine.
Pallet forks
Adjustable-tine pallet forks are the main material-handling attachment for this class and suit the companion IT28G integrated-toolcarrier version of the 928G best. Its parallel (8-bar) lift linkage keeps forks level through the full lift range without operator correction, unlike the standard 928G's Z-bar linkage, which needs manual bucket/fork leveling as the load is raised.
Coupler / mounting system
The base 928G mounts work tools pin-on through its Z-bar loader linkage, which favors digging strength and breakout force over quick tool changes. The IT28G toolcarrier variant of the same chassis instead uses a mechanical quick-coupler frame on parallel-lift arms so buckets, forks, and other tools can be swapped quickly without leaving the cab.
Auxiliary hydraulics / valve arrangement
Standard hydraulics cover lift and tilt only, supplied by separate steering and implement pumps with load-sensing steering so implement power is not robbed from steering. A factory auxiliary valve/lever option adds the extra hydraulic function needed for tools with a third circuit, such as a clamp bucket, fork positioner, or other single-acting work tool.
Ride control
Factory-optional ride control, switchable between auto, on, and off modes, dampens bucket and fork loads while traveling with a full attachment. It reduces spillage and operator fatigue during load-and-carry work and is a hydraulic accumulator addition to the standard lift circuit rather than a separate tool mount.
Tires and guarding
Standard fitment for this class is a radial L-3 rock/traction tire (20.5R25) with a ROPS/FOPS-certified cab. A heavy-duty cooling package is offered as a factory option to support sustained work-tool cycling and load-and-carry duty in hot or dusty conditions.
All 928G assemblies by section
Every catalogued assembly group for the Caterpillar 928G. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
117-8273 Air Cleaner Gp
| 0A***26 | Fitting | 1 |
| 11***73 | Air Cleaner Group | 1 |
| 11***16 | Air Cleaner Group | 1 |
119-8416 Air Cleaner Gp
| 11***16 | Air Cleaner Group | 1 |
| 6I***99 | Filter Element As-Air; (Primary) | 1 |
| 6I***00 | Filter Element As-Air; (Secondary) | 1 |
100-6916 Cartridge Gp-Turbocharger
| 10***16 | Cartridge Group-Turbocharger | 1 |
1n-4877 Cover Gp-Inlet Manifold
| 1N***77 | Cover Group-Inlet Manifold | 1 |
| 4W***22 | Cover-Inlet Manifold | 1 |
| 6V***19 | Bolt; (M8x1.25x40-mm) | 20 |
118-0890 Extension Gp-Exhaust
| 11***89 | Pipe-Extension | 1 |
| 11***90 | Extension Group-Exhaust | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
117-8275 Lines Gp-Air
| 11***75 | Lines Group-Air | 1 |
| 12***93 | Hose-Air Inlet | 1 |
| 6N***09 | Ring (O.D. 90.5 In. Dia.) | 2 |
1w-6029 Lines Gp-Air
| 1W***29 | Lines Group-Air | 1 |
| 7C***07 | Elbow | 1 |
| 7C***19 | Hose | 2 |
7w-9248 Manifold Gp-Exhaust
| 10***38 | Manifold-Exhaust | 1 |
| 11***00 | Gasket-Manifold | 3 |
| 14***48 | Bolt; (M10x1.5x65-mm)(M10x1.50x65mm) | 12 |
133-8132 Manifold Gp-Inlet
| 11***50 | Gasket | 1 |
| 13***32 | Manifold Group-Inlet | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
4w-3480 Manifold Gp-Inlet
| 11***50 | Gasket | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 3 |
| 4W***80 | Manifold Group-Inlet; Inlet Manifold Group | 1 |
159-8603 Manifold Gp-Inlet
| 11***50 | Gasket | 1 |
| 15***03 | Manifold Group-Inlet | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
117-8277 Muffler Gp
| 11***77 | Muffler Group | 1 |
| 11***11 | Muffler As | 1 |
| 11***13 | Support | 1 |
115-1181 Turbocharger Gp
| 10***16 | Cartridge Group-Turbocharger | 1 |
| 10***69 | Housing; (Compressor) | 1 |
| 11***64 | Housing; (Turbine) | 1 |
113-6247 Turbocharger Gp
| 11***47 | Turbocharger Group | 1 |
| 11***81 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
129-1124 Turbocharger Gp
| 12***24 | Turbocharger Group | 1 |
| 12***24 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
125-1124 Turbocharger Gp
| 10***64 | Cartridge Group-Turbocharger | 1 |
| 11***64 | Housing; (Turbine) | 1 |
| 12***24 | Turbocharger Group | 1 |
Basic Engine
108-5759 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 10***59 | Camshaft Group; (Single) | 1 |
| 13***76 | Camshaft Assem. | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
4p-0512 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 13***40 | Spacer; (9x15x15-mm Thk) | 1 |
| 17***67 | Spacer; (8.8x16x10-mm Thk)(Marked X) | 4 |
7l-0004 Cover Gp-Front Housing
| 10***20 | Cover As-Front | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
4w-2172 Cover Gp-Valve Mechanism
| 11***40 | Gasket; (Valve Cover) | 1 |
| 11***60 | Cover | 1 |
| 4W***72 | Cover Group-Valve Mechanism; Valve Mechanism Cover Group | 1 |
4w-2197 Crankshaft Gp
| 10***30 | Bearing-Main; (Standard) | 3 |
| 10***25 | Crankshaft Assem. | 1 |
| 10***02 | Bearing-Thrust; (Standard) | 1 |
2w-9746 Cylinder Block Gp
| 12***95 | Cylinder Block Group | 1 |
| 1W***07 | Sleeve | 2 |
| 2W***46 | Cylinder Block Group | 1 |
149-5403 Cylinder Block Gp
| 14***02 | Pin, Cylinder Block As | 1 |
| 14***03 | Cylinder Block Group | 1 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
129-1095 Cylinder Block Gp
| 12***95 | Cylinder Block Group | 1 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
4p-8262 Cylinder Head As
| 1W***13 | Insert-Valve Seat; (Exhaust) | 6 |
| 4P***62 | Cylinder Head As | 1 |
| 4P***78 | Seat-Valve; (Inlet) | 6 |
190-9066 Cylinder Head As
| 11***61 | Sleeve | 6 |
| 16***63 | Insert-Valve Seat; (Inlet) | 6 |
| 19***66 | Cylinder Head As | 1 |
119-3065 Cylinder Head As
| 11***61 | Sleeve | 6 |
| 11***65 | Cylinder Head As | 1 |
| 12***53 | Insert-Valve Seat; (Inlet) | 6 |
140-7371 Cylinder Head Gp
| 11***36 | Seal-Valve Stem | 12 |
| 13***19 | Valve-Exhaust | 6 |
| 14***71 | Cylinder Head Group | 1 |
4p-8263 Cylinder Head Gp
| 11***80 | Valve-Inlet | 6 |
| 11***36 | Seal-Valve Stem | 12 |
| 11***65 | Cylinder Head As | 1 |
4p-8264 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 3 |
159-0305 Cylinder Head Gp
| 10***32 | Gasket; (1.61mm Thk) | 1 |
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
| 14***71 | Cylinder Head Group | 1 |
160-5130 Cylinder Head Gp
| 14***71 | Cylinder Head Group | 1 |
| 16***30 | Cylinder Head Group | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 3 |
156-3869 Damper & Pulley Gp
| 13***48 | Pulley-Crankshaft | 1 |
| 14***90 | Collar | 1 |
| 15***69 | Damper & Pulley Group | 1 |
117-8272 Damper & Pulley Gp
| 11***72 | Damper & Pulley Group | 1 |
| 11***74 | Pulley; (2 Groove, 230mm/200mm Od) | 1 |
| 20***88 | Damper Assem. | 1 |
7c-4532 Drain Gp-Engine Oil
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
| 7C***32 | Drain Group-Oil Pan; Oil Pan Drain Group | 1 |
277-7239 Drive Gp-Fan
| 11***13 | Support | 1 |
| 13***65 | Washer; (13.8x45x3-mm Thk) | 1 |
| 17***36 | Shim; (1-mm Thk) | 2 |
4w-5428 Drive Gp-Water Pump
| 03***75 | V-Belt; (Pump Drive)(Water) | 1 |
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
9y-9511 Flywheel Gp
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
| 6V***97 | Bolt; (M12x1.75x40-mm)(Locking) | 8 |
207-4275 Flywheel Gp
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***75 | Flywheel Group | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
101-4540 Gear Gp-Front
| 10***07 | Shaft-Cam Idler | 1 |
| 10***08 | Plate-Retaining | 1 |
| 10***40 | Gear Group-Front | 1 |
7e-8774 Housing Gp-Flywheel
| 10***52 | Housing-Flywheel | 1 |
| 2P***94 | Plug-Sealing | 1 |
| 6V***42 | Bolt (M10x1.50x40mm) | 2 |
9y-4856 Housing Gp-Flywheel
| 1B***70 | Plug-Pipe; (Drain) | 1 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 1 |
| 2P***94 | Plug-Sealing | 1 |
101-4539 Housing Gp-Front
| 10***39 | Housing Group-Front | 1 |
| 10***11 | Plug | 2 |
| 13***42 | Housing-Front | 1 |
4w-2515 Lifting Gp-Engine
| 4W***82 | Plate-Lifting; (Rear)(Rear) | 1 |
| 4W***83 | Plate-Lifting; (Front) | 1 |
| 4W***15 | Lifting Group | 1 |
203-3147 Mounting Gp-Engine & Xmsn
| 11***79 | Bracket As | 1 |
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 8 |
| 13***24 | Bracket As | 1 |
113-3777 Mounting Gp-Engine & Xmsn
| 10***33 | Support | 2 |
| 11***77 | Mounting Group-Engine & Xmsn | 1 |
| 11***79 | Bracket As | 1 |
7e-3545 Pan Gp-Oil
| 10***25 | Pan-Oil | 1 |
| 26***16 | Gasket-Oil Pan; (Engine) | 1 |
| 4C***12 | Sealant-Silicone; (2-Ml) | 0 |
115-4084 Piston & Rod Gp
| 10***63 | Body As-Piston | 1 |
| 10***87 | Ring-Piston (Top-Chrome) | 1 |
| 11***84 | Piston & Rod Group | 1 |
4w-5429 Pulley Gp-Crankshaft
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
| 4W***29 | Pulley Group-Crankshaft; Crankshaft Pulley Group | 1 |
| 7W***73 | Pulley-Crankshaft; (1-Groove) | 1 |
107-7722 Rocker Arm Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 10***91 | Seat-Wear | 1 |
| 10***76 | Rocker Arm As; (Unit Injector) | 1 |
115-4203 Seal Gp-Crankshaft
| 11***03 | Seal Group-Crankshaft | 1 |
| 22***09 | Seal Group-Crankshaft; (Rear) | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
115-4210 Seal Gp-Crankshaft
| 11***10 | Seal Group-Crankshaft | 1 |
| 22***10 | Seal Group-Crankshaft; (Clockwise Rotation) | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
7c-1770 Seal Gp-Flywheel Housing
| 1U***46 | Sealant (For Locations A) | 0 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
4p-4372 Mechanism Gp-Fuel Pump & Valve
| 10***22 | Rocker Arm Group-Valve | 6 |
| 14***47 | Arm As-Lifter | 4 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 2 |
Braking System
114-1151 Accumulator Gp-Brake -Charged
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
140-9251 Accumulator Gp-Brake -Charged
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
149-5532 Accumulator Gp-Hydraulic -Uncharged-Brake
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
9c-5965 Brake Gp-Parking
| 1V***72 | Spring-Extension | 1 |
| 3K***56 | Spring (2.34" Long Free Length) | 1 |
| 3K***57 | Spring (3.66" Long Free Length) | 1 |
214-4769 Brake Gp-Parking
| 11***50 | Shoe As-Lined | 2 |
| 1V***72 | Spring-Extension | 1 |
| 21***68 | Plate As | 1 |
111-9041 Brake Gp-Parking
| 11***41 | Brake Group-Parking; (Bendix) | 1 |
| 11***50 | Shoe As-Lined | 2 |
| 1V***72 | Spring-Extension | 1 |
9c-5973 Brake Gp-Parking
| 6W***12 | Plate Assem. | 1 |
| 6W***13 | Spring; (Shoe To Shoe) | 1 |
| 6W***14 | Spring; (Shoe Return) | 1 |
9c-8683 Brake Gp-Parking
| 11***41 | Brake Group-Parking; (Bendix) | 1 |
| 9C***65 | Brake Group-Parking; Parking Brake Group(Bendix) | 1 |
| 9C***73 | Brake Group-Parking; Parking Brake Group(Akebono) | 1 |
132-6799 Control Gp-Foot Brake
| 11***75 | Switch As-Limit; (Transmission Neutralizer) | 1 |
| 12***49 | Valve Group-Brake Control; -Service | 1 |
| 12***68 | Rod | 1 |
135-5086 Control Gp-Parking Brake -Handle
| 13***86 | Control Group-Parking Brake; -Handle | 1 |
| 13***10 | Lever Assem. | 1 |
| 13***41 | Bracket Assem. | 1 |
168-7000 Control Gp-Parking Brake -Handle
| 16***08 | Bracket Assem. | 1 |
| 16***12 | Lever Assem. | 1 |
| 16***00 | Control Group-Parking Brake; -Handle | 1 |
122-6273 Control Gp-Parking Brake
| 12***73 | Control Group-Parking Brake | 1 |
| 14***93 | Cable As-Parking Brake Control | 1 |
| 3B***10 | Cotter-To Inspection Door | 1 |
140-9258 Control Gp-Service Brake
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***98 | Boot | 1 |
| 11***99 | Kit-Seal; (Brake Valve)(Service Brake Valve) | 1 |
118-0926 Lines Gp-Service Brake
| 10***21 | Hose Assem. | 1 |
| 11***40 | Spacer; (13.1x15.9x36.5-mm Thk)(36.5mm Thk) | 2 |
| 11***26 | Lines Group-Service Brake | 1 |
141-1504 Pump Gp-Gear -Brake, Hydraulic Fan
| 12***62 | Gear (50 Teeth) | 1 |
| 14***04 | Pump Group-Gear; -Brake, Hydraulic Fan | 1 |
| 14***81 | Pump Group-Gear; -Brake, Hydraulic Fan | 1 |
147-0181 Pump Gp-Gear
| 09***94 | Ring-Retaining | 1 |
| 13***87 | Locknut | 1 |
| 13***26 | Bolt-Socket Head; (3/8-16x4.75-In) | 1 |
143-1340 Valve Gp-Accumulator Charging
| 09***18 | Seal-O-Ring | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 13***27 | Plug | 1 |
123-9849 Valve Gp-Brake Control -Service
| 11***98 | Boot | 1 |
| 11***99 | Kit-Seal; (Brake Valve)(Service Brake Valve) | 1 |
| 12***49 | Valve Group-Brake Control; -Service | 1 |
Cooling System
100-6269 Cooler Gp-Engine Oil
| 10***69 | Cooler Group-Engine Oil | 1 |
| 23***55 | Gasket | 1 |
| 26***43 | Core As-Engine Oil Cooler | 1 |
113-4001 Fan Gp-Suction
| 11***33 | Spider As-Fan | 1 |
| 11***01 | Fan Group-Suction | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
113-3568 Guard Gp-Fan
| 10***17 | Rod Assem. | 1 |
| 11***45 | Latch As-Door | 1 |
| 11***68 | Guard Group-Fan | 1 |
7c-1567 Lines Gp-Water
| 12***48 | Housing-Water Regulating | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 15***99 | Clamp; (Hose) | 2 |
150-1998 Lines Gp-Water
| 12***48 | Housing-Water Regulating | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 15***98 | Lines Group-Water | 1 |
7c-4508 Pump Gp-Water
| 15***37 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
4w-7589 Pump Gp-Water
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
| 4J***24 | Seal 46.99 mm(1.85 In.) I.D. | 1 |
| 4W***89 | Pump Group-Water | 1 |
159-3137 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 15***37 | Pump Group-Water | 1 |
113-3636 Radiator & Hyd Oil Cooler Gp
| 11***36 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 8T***21 | Nut-Weld (M8x1.25 Thd) | 12 |
| 9Y***61 | Core As-Oil Cooler | 1 |
166-4778 Radiator & Hyd Oil Cooler Gp -(Basic)
| 16***78 | Radiator & Hydraulic Oil Cooler Group; -(Basic) | 1 |
| 1V***85 | Valve-Shutoff; (Hydraulic Oil) | 1 |
| 7M***85 | Seal,Adapter,Motor Part Of Kit P/N 5r***29 | 1 |
113-3567 Radiator Gp
| 00***65 | Cap-Radiator; (7 Psi) | 1 |
| 10***21 | Clamp | 8 |
| 11***67 | Radiator Group | 1 |
Electrical And Starting System
3e-6329 Alarm Gp -Action
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
165-7640 Alternator Ar-Charging
| 15***05 | Wiring Group-Engine & Xmsn | 1 |
| 15***71 | Alternator Group-Charging | 1 |
| 16***40 | Alternator Ar-Charging | 1 |
156-3871 Alternator Gp-Charging
| 14***98 | Wire Assem. | 1 |
| 15***34 | Alternator Group-Charging | 1 |
| 15***71 | Alternator Group-Charging | 1 |
156-3870 Alternator Gp-Charging
| 10***82 | Wire Assem. | 1 |
| 13***21 | Bolt-Hex Head; (M10x1.5x120mm) | 1 |
| 15***70 | Alternator Group-Charging | 1 |
165-7639 Alternator Gp-Charging
| 11***50 | Wiring Group-Power Train | 1 |
| 15***70 | Alternator Group-Charging | 1 |
| 16***39 | Alternator Group-Charging | 1 |
9w-3043 Alternator Gp-Charging
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 5 |
| 10***63 | Regulator As-Alternator; (24-Volt) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
117-8280 Alternator Gp-Charging
| 10***82 | Wire Assem. | 1 |
| 11***80 | Alternator Group-Charging | 1 |
| 13***21 | Bolt-Hex Head; (M10x1.5x120mm) | 1 |
130-5610 Battery & Wiring Gp
| 11***98 | Plate | 1 |
| 13***10 | Battery & Wiring Group | 1 |
| 13***33 | Cable As | 1 |
112-7167 Battery Gp
| 11***67 | Battery Group; -12-Volt, 900-Ampere | 1 |
| 9X***04 | Battery-Maintenance Free; (12 Volt)(900 Amp) | 2 |
132-2685 Battery Gp
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
| 13***85 | Battery Group | 1 |
116-2025 Control Gp-Position
| 11***25 | Control Group-Bucket Positioner | 1 |
| 11***26 | Control As-Electronic | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
3e-7843 Control Gp-Position -Work Tool
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 3 |
| 3E***43 | Control Group-Bucket Positioner; (Bucket Positioner) | 1 |
144-3902 Control Gp-Diode Block
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***02 | Control Group-Diode Block | 1 |
| 14***03 | Control As-Electronic | 1 |
3e-7844 Control Gp-Lift Kickout
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 3E***44 | Control Group-Lift Kickout; (Lift Kickout) | 1 |
| 9X***17 | Film-Instruction; (Kickout, Positioner Control) | 1 |
3e-5184 Control Gp-Secondary Steering
| 1S***93 | Strap; (Cable) (0.62in Dia) | 6 |
| 3E***84 | Control Group-Secondary Steering; -Electronic Monitoring System | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
115-1317 Converter Gp-Electrical
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***17 | Converter Group-Electrical | 1 |
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 1 |
190-2446 Electronics Gp-Machine -Security
| 19***46 | Electronics Group-Machine; -Security | 1 |
| 20***62 | Electronics Group-Machine | 1 |
| 23***37 | Software Group-Machine; (Security) | 1 |
207-5262 Electronics Gp-Machine -Security
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***55 | Control Group-Unprogrammed; -Machine Security System | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
128-0209 Heater Ar-Air Inlet
| 12***09 | Heater Ar-Air Inlet | 1 |
| 13***12 | Starting Aid Group | 1 |
| 13***90 | Starting Aid Group | 1 |
9x-3294 Heater Gp-Jacket Water
| 12***86 | Element As-Jacket Water Heater; (120-Volt, 1000-Watt) | 1 |
| 13***48 | Kit-Seal; (Jacket Water Heater) | 1 |
| 6N***04 | Cap As-Dust; (Jacket Water Heater Elements) | 1 |
3t-8724 Heater Gp-Jacket Water
| 12***87 | Element As-Jacket Water Heater; (240-Volt, 1000-Watt) | 1 |
| 13***48 | Kit-Seal; (Jacket Water Heater) | 1 |
| 13***17 | Cap As-Dust | 1 |
184-5300 Installation Gp-Security
| 09***49 | Bolt; (M8x1.25x40-mm) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
227-0902 Installation Gp-Security
| 09***49 | Bolt; (M8x1.25x40-mm) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
117-3468 Lamp Gp-Flood
| 11***68 | Lamp Group-Flood; -Suspended Mount | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
| 14***83 | Seal | 1 |
234-4325 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***25 | Lamp Group-Flood; -Suspended Mount | 1 |
3e-6466 Lamp Gp-Signal
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***66 | Lamp Group-Signal; -Rear Turn, Parking | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
130-3453 Lamp Gp-Signal
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***53 | Lamp Group-Signal; -Stop, Tail | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
108-1029 Lamp Gp-Warning Beacon -Amber
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 9R***42 | Plug As | 1 |
115-1558 Lighting Gp-Auxiliary -Cab Front
| 11***58 | Lighting Group-Auxiliary; -2-Lamp, Cab, Front | 1 |
| 11***59 | Plate | 2 |
| 11***68 | Lamp Group-Flood; -Suspended Mount | 2 |
117-9622 Lighting Gp-Flood -Cab
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***41 | Lamp Group-Flood; (24-Volt) | 4 |
| 10***81 | Cable As-Coaxial | 1 |
120-6668 Lighting Gp-Flood -Canopy
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***41 | Lamp Group-Flood; (24-Volt) | 4 |
| 11***57 | Harness Assembly; (Floodlight) | 1 |
113-3648 Lighting Gp-Signal
| 06***91 | Terminal-Blade; (14-Ga To 18-Ga) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
113-3649 Lighting Gp-Signal
| 06***91 | Terminal-Blade; (14-Ga To 18-Ga) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
107-6142 Lighting Gp-Warning Beacon
| 10***33 | Switch As-Warning Beacon | 1 |
| 10***42 | Lighting Group-Warning Beacon | 1 |
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
117-3915 Motor Gp-Electric -Secondary Steering
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
| 7X***08 | Washer-Hard; (10.2x16x2-mm Thk) | 2 |
189-5746 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***49 | Strap; (Marker) | 1 |
193-0421 Sensor Gp-Speed -Torque Converter Output
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 17***49 | Strap; (Marker) | 1 |
7c-4028 Solenoid Gp-Shutoff -Fuel
| 15***52 | Solenoid As; (Fuel Shutoff) | 1 |
| 4B***74 | Washer (Required Only When Bosch Alternator Is Fitted) | 1 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 1 |
133-3390 Starting Aid Gp
| 10***58 | Cover-Inlet Manifold | 1 |
| 10***62 | Elbow | 1 |
| 12***42 | Gasket | 2 |
130-5412 Starting Aid Gp
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***36 | Switch As-Rocker; (Thermal Starting Aid) | 1 |
| 11***06 | Strap As-Ground | 1 |
111-4275 Starting Motor Gp-Electric
| 11***75 | Starting Motor Group-Electric; (Cold Weather) | 1 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
106-8559 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
106-8558 Starting Motor Gp-Electric
| 10***58 | Starting Motor Group-Electric | 1 |
| 10***59 | Starting Motor Group-Electric; Electric Starting Motor Group (Delco Remy) | 1 |
207-1517 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
142-3985 Switch Gp-Magnetic
| 14***85 | Switch As-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 6V***78 | Nut; (10-32-Thd) | 2 |
142-3984 Switch Gp-Magnetic
| 14***84 | Switch As-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
130-5602 Switch Gp-Disconnect
| 12***74 | Bracket | 1 |
| 13***02 | Switch Group-Disconnect | 1 |
| 13***39 | Cable As | 1 |
3e-0075 Switch Gp-Magnetic -Air Inlet Heater Relay
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 3E***75 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
175-2308 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
175-2322 Switch Gp-Magnetic -Air Inlet Heater Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
167-0138 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
175-2309 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***81 | Switch As-Magnetic; (Start Relay) | 1 |
3e-0154 Switch Gp-Magnetic
| 14***84 | Switch As-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 14***85 | Switch As-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 3E***54 | Switch Group-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
118-3534 Switch Gp-Magnetic
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
| 17***09 | Switch Group-Magnetic; -24-Volt-Start Relay | 1 |
175-2324 Switch Gp-Magnetic -Start Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
275-7741 Switch Gp-Wiper -Intermittent
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 27***41 | Switch Group-Wiper; -Intermittent-Front, Rear | 1 |
107-6133 Switch Gp-Wiper -Intermittent
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***33 | Switch Group-Wiper; -Intermittent | 1 |
| 11***74 | Wiper And Washer Switch Assembly; (Wiper, Washer)(Wiper, Washer, Rear) | 1 |
113-3653 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***53 | Warning Group-Backup | 1 |
| 12***49 | Alarm Group | 1 |
178-3318 Wiring Gp-Axle Oil Cooler
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***61 | Housing | 1 |
| 11***47 | Plate | 1 |
113-3641 Wiring Gp-Cab
| 00***84 | Terminal-Blade; (16-Ga To 20-Ga) | 2 |
| 06***91 | Terminal-Blade; (14-Ga To 18-Ga) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
171-6172 Wiring Gp-Cab
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
154-5205 Wiring Gp-Engine & Xmsn
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
194-7890 Wiring Gp-Fan
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
195-7598 Wiring Gp-Fan
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
123-7333 Wiring Gp-Front
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
113-3642 Wiring Gp-Open Rops
| 06***91 | Terminal-Blade; (14-Ga To 18-Ga) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
171-6171 Wiring Gp-Open Rops
| 06***91 | Terminal-Blade; (14-Ga To 18-Ga) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
122-6492 Wiring Gp-Platform
| 00***84 | Terminal-Blade; (16-Ga To 20-Ga) | 2 |
| 06***91 | Terminal-Blade; (14-Ga To 18-Ga) | 4 |
| 06***09 | Screw; (8-32x0.75-In) | 2 |
122-6497 Wiring Gp-Platform -Open Rops
| 00***84 | Terminal-Blade; (16-Ga To 20-Ga) | 2 |
| 06***91 | Terminal-Blade; (14-Ga To 18-Ga) | 4 |
| 06***09 | Screw; (8-32x0.75-In) | 2 |
113-3650 Wiring Gp-Power Train
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
113-3651 Wiring Gp-Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***08 | Sender Assem.; (Hydraulic Oil Temperature) | 1 |
132-1328 Wiring Gp-Ride Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 10***30 | Switch As; (Auto Ride Control) | 1 |
113-3787 Wiring Gp-Secondary Steering
| 11***61 | Housing | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***87 | Wiring Group-Secondary Steering | 1 |
Engine Arrangement
158-3335 Engine Ar
| 10***69 | Cooler Group-Engine Oil | 1 |
| 10***39 | Housing Group-Front | 1 |
| 10***40 | Gear Group-Front | 1 |
118-0904 Engine Ar
| 10***69 | Cooler Group-Engine Oil | 1 |
| 10***39 | Housing Group-Front | 1 |
| 10***40 | Gear Group-Front | 1 |
204-0340 Engine Ar
| 10***69 | Cooler Group-Engine Oil | 1 |
| 10***39 | Housing Group-Front | 1 |
| 10***40 | Gear Group-Front | 1 |
117-7594 Installation Ar-Engine
| 11***67 | Radiator Group | 1 |
| 11***77 | Mounting Group-Engine & Xmsn | 1 |
| 11***01 | Fan Group-Suction | 1 |
Frame And Body
138-7093 Box Gp-Battery
| 11***56 | Angle | 1 |
| 13***88 | Cover | 1 |
| 13***90 | Box As | 1 |
118-0823 Counterweight Gp
| 10***96 | Pin-Keeper | 1 |
| 11***23 | Counterweight Group | 1 |
| 11***24 | Counterweight | 1 |
218-1799 Counterweight Gp
| 13***23 | Counterweight; (Rh) | 1 |
| 13***23 | Counterweight; (Lh) | 1 |
| 21***99 | Counterweight Group | 1 |
118-0960 Counterweight Gp
| 11***60 | Counterweight Group | 1 |
| 13***23 | Counterweight; (Rh) | 1 |
| 13***23 | Counterweight; (Lh) | 1 |
128-0160 Door Gp-Access
| 05***48 | Locknut; (9/16-18-Thd) | 4 |
| 11***52 | Door As; (Lh) | 1 |
| 11***54 | Door As; (Rh) | 1 |
122-6186 Fender Gp
| 11***16 | Fender As-Rh | 1 |
| 12***82 | Fender As-Lh | 1 |
| 12***86 | Fender Group | 1 |
113-3785 Frame Gp-Loader
| 11***85 | Frame Group-Loader | 1 |
| 11***00 | Frame As-Loader | 1 |
| 11***55 | Plate | 1 |
122-6525 Frame Gp-Rear
| 11***85 | Pad As-Resilient | 2 |
| 11***96 | Cover As | 1 |
| 11***31 | Frame As | 1 |
178-0255 Guard Gp-Crankcase
| 17***47 | Plate As | 1 |
| 17***55 | Guard Group-Crankcase | 1 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 1 |
118-0826 Guard Gp-Crankcase
| 11***26 | Guard Group-Crankcase | 1 |
| 11***28 | Plate | 1 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 1 |
197-5022 Guard Gp-Lighting
| 19***22 | Guard Group-Lighting | 1 |
| 19***23 | Screen As | 2 |
| 19***24 | Bracket As | 2 |
118-1121 Guard Gp-Lines -Tilt
| 11***21 | Guard Group-Lines; -Tilt | 1 |
| 12***68 | Guard-Hose | 2 |
| 6V***45 | Grommet | 2 |
128-0298 Guard Gp-Lines -Third Function
| 12***98 | Guard Group-Lines; -Third Function | 1 |
| 16***48 | Sleeve-Abrasion | 0 |
| 5P***68 | Clip (Slot-For Use On 52 mm Od Tube) | 2 |
118-0827 Guard Gp-Power Train
| 11***27 | Guard Group-Power Train | 1 |
| 15***62 | Plate As | 1 |
| 4E***54 | Plate | 1 |
202-4227 Guard Gp-Radiator
| 20***12 | Cover, Guard As, . Cover | 1 |
| 20***27 | Guard Group-Radiator | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 10 |
113-3790 Hitch Gp-Articulating
| 11***28 | Shim | 1 |
| 11***90 | Hitch Group-Articulating | 1 |
| 11***91 | Pin As | 1 |
113-3950 Hood & Guard Gp
| 11***50 | Hood & Guard Group | 1 |
| 11***62 | Plate As | 1 |
| 12***82 | Door | 1 |
118-1070 Ladder Gp
| 11***70 | Ladder Group | 1 |
| 12***47 | Spacer; (10.5x20x12-mm Thk) | 24 |
| 13***39 | Ladder As | 2 |
118-0878 Lines Gp-Grease
| 11***78 | Lines Group-Grease | 1 |
| 3B***52 | Elbow; --Cross To Hose Assembly To Air Gauge | 3 |
| 3B***34 | Nipple-Pipe | 1 |
113-3783 Link Gp-Steering Frame Lock
| 11***83 | Link Group-Steering Frame Lock | 1 |
| 11***84 | Link | 1 |
| 5P***37 | Pin (Lock) | 2 |
122-6442 Panel Gp-Side
| 12***42 | Panel Group-Side | 1 |
| 14***10 | Hinge As | 1 |
| 16***35 | Panel As; (Rh) | 1 |
122-6437 Panel Gp-Side
| 12***37 | Panel Group-Side | 1 |
| 12***48 | Panel As; (Rh) | 1 |
| 12***49 | Panel As; (Lh) | 1 |
175-0394 Screen Gp-Air
| 17***94 | Screen Group-Air | 1 |
| 18***15 | Bolt-Hex Head; (M6x1x20mm) | 16 |
| 18***17 | Washer-Hard; (7x19x2-mm Thk) | 16 |
Fuel System
105-1695 Control Gp-Fuel Injection
| 10***95 | Control Group-Fuel Injection | 1 |
| 16***56 | Control Group-Fuel Injection | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 4 |
165-1531 Control Gp-Governor
| 16***30 | Lever As | 1 |
| 16***31 | Control Group-Governor | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 1 |
122-6370 Control Gp-Governor
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
| 12***70 | Control Group-Governor | 1 |
| 13***47 | Spring | 1 |
7e-9912 Control Gp-Governor
| 4P***46 | Lever Assem. | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 1 |
| 6I***83 | Spring | 2 |
7e-8794 Drive Gp-Gov & Transfer Pump
| 10***68 | Gear As-Drive; (44-Teeth), . Body | 1 |
| 10***85 | Lever-Shutoff; (Output) | 1 |
| 1W***65 | Ring-Retaining | 1 |
7w-4812 Fastener Gp-Fuel Inj Pump
| 1T***68 | Seal-O-Ring; (Fuel Injection Pump) | 1 |
| 6F***73 | Seal--To Top Cover On Selector Valve | 1 |
| 6V***18 | Bolt (M8x1.25x45mm); (M8x1.25x35-mm) | 3 |
146-3635 Filter & Lines Gp-Fuel
| 11***23 | Insert-Fuel Filter | 1 |
| 12***01 | Base As-Fuel Filter | 1 |
| 13***98 | Hose As | 1 |
131-1917 Filter Gp-Fuel
| 11***23 | Insert-Fuel Filter | 1 |
| 12***71 | Bracket | 1 |
| 13***17 | Filter Group-Fuel | 1 |
158-3506 Filter Gp-Fuel
| 11***23 | Insert-Fuel Filter | 1 |
| 14***36 | Plate As | 1 |
| 15***06 | Filter Group-Fuel | 1 |
129-1144 Governor Gp
| 12***44 | Governor Group | 1 |
| 13***47 | Governor Group-Unit Injector | 1 |
| 7W***12 | Fastener Group-Governor; Fastener Group(Governor) (~1c K5811) | 1 |
131-1447 Governor Gp-Unit Injector
| 10***91 | Spring-Oil Side | 1 |
| 10***72 | Cam Assem. | 1 |
| 13***47 | Governor Group-Unit Injector | 1 |
133-3062 Governor Gp-Unit Injector
| 10***90 | Spring-Air Side | 1 |
| 10***92 | Spring-Servo | 1 |
| 10***93 | Spring-Return | 1 |
118-0846 Lines Gp-Fuel
| 11***13 | Grommet | 1 |
| 11***46 | Lines Group-Fuel | 1 |
| 13***88 | Bracket As | 1 |
131-1918 Lines Gp-Fuel Filter
| 11***84 | Tee-O-Ring Port | 1 |
| 11***33 | Tube As | 1 |
| 13***18 | Lines Group-Fuel Filter | 1 |
113-6184 Lines Gp-Fuel Filter
| 11***84 | Lines Group-Fuel Filter | 1 |
| 11***84 | Tee-O-Ring Port | 1 |
| 11***33 | Tube As | 1 |
107-7731 Lines Gp-Fuel Ratio Control
| 10***80 | Tube Assem. | 1 |
| 10***31 | Lines Group-Fuel Ratio Control; Air Fuel Ratio Control Lines Group, Angle | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
7w-8434 Lines Gp-Governor Oil
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 2 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 2 |
| 6V***28 | Elbow-Face Seal (For 6.35mm Od Tube) | 1 |
107-7732 Pump Gp-Fuel Injection
| 10***32 | Pump Group-Fuel Injection | 1 |
| 11***18 | Seal-O-Ring; (26.64mm Id) | 1 |
| 12***74 | Seal-O-Ring; (7.59mm'Id) | 1 |
127-6449 Pump Gp-Fuel Prm & Water Sep
| 11***01 | Bowl As-Water Collection | 1 |
| 11***89 | Element-Water Separator; (Water/Fuel Seperator) | 1 |
| 11***61 | Base Assem. | 1 |
132-1327 Pump Gp-Fuel Tfr & Priming
| 10***87 | Connector | 1 |
| 10***29 | Hose Assem. | 1 |
| 13***27 | Pump Group-Fuel Tfr & Priming | 1 |
149-2683 Separator Gp-Water
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
141-8288 Valve Gp-Fuel Relief
| 14***87 | Spring | 1 |
| 14***88 | Valve Group-Fuel Relief | 1 |
| 2W***94 | Plunger As-Valve | 1 |
Hydraulic System
118-0870 Accumulator & Mtg Gp-Ride Cont
| 10***26 | Plate | 1 |
| 10***42 | Plate | 1 |
| 11***70 | Accumulator & Mtg Group-Ride Cont | 1 |
113-1050 Accumulator Gp-Pilot Oil -Charged
| 11***50 | Accumulator Group-Pilot Oil; -Charged | 1 |
| 15***36 | Valve-Gas; (Brake) | 1 |
| 16***96 | Service Kit; (Includes Seals) | 1 |
223-9699 Accumulator Gp-Ride Control -Uncharged
| 06***35 | Valve-Gas | 1 |
| 17***93 | Kit-Seal; (Hydraulic Accumulator) | 1 |
| 17***03 | Film-Warning; (Accum, High Press, Read Omm)(Plate-Name) | 1 |
223-9698 Accumulator Gp-Ride Control -Charged
| 06***35 | Valve-Gas | 1 |
| 17***93 | Kit-Seal; (Hydraulic Accumulator) | 1 |
| 17***03 | Film-Warning; (Accum, High Press, Read Omm)(Plate-Name) | 1 |
120-5321 Valve Gp-Pilot Cartridge
| 10***37 | Plunger | 1 |
| 10***46 | Seat-Spring | 1 |
| 12***20 | Spring | 1 |
110-6141 Valve Gp-Pilot Cartridge
| 10***46 | Seat-Spring | 1 |
| 10***58 | Plunger | 1 |
| 10***59 | Spring | 1 |
6e-6477 Cartridge Gp-Vane Pump
| 06***57 | Seal-O-Ring | 1 |
| 11***11 | Seal Assem.; (Includes Parts Marked J) | 4 |
| 3F***92 | Seal-O-Ring | 1 |
128-0263 Control Ar-Ride
| 12***63 | Control Ar-Ride | 1 |
| 13***28 | Wiring Group-Ride Control | 1 |
| 21***73 | Lines Group-Ride Control | 1 |
209-7763 Control Gp-Hydraulic Lockout
| 11***49 | Lock Assem. | 1 |
| 14***69 | Rod | 2 |
| 20***95 | Plate | 1 |
218-3820 Control Gp-Ride
| 06***35 | Valve-Gas | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
205-1121 Conversion Gp-Control Valve -Kit
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 14***88 | Film-Instrument; (Implement Lockout) | 1 |
| 14***93 | Plate-Instrument | 1 |
205-1331 Conversion Gp-Control Valve -Kit
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 11***37 | Rod | 1 |
| 11***71 | Hose As | 1 |
205-1334 Conversion Gp-Control Valve -Kit
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 11***37 | Rod | 1 |
| 11***71 | Hose As | 1 |
194-7748 Conversion Gp-Hydraulic Fan -Kit
| 19***39 | Motor Group-Gear; -Reversible Fan-Hydraulic Fan | 1 |
| 19***70 | Lines Group-Hydraulic Fan | 1 |
| 19***48 | Conversion Group-Hydraulic Fan; -Kit | 1 |
195-9334 Conversion Gp-Hydraulic Fan
| 19***91 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 19***70 | Lines Group-Hydraulic Fan | 1 |
| 19***77 | Grill As | 1 |
205-0348 Conversion Gp-Pilot Control -Kit
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 14***88 | Film-Instrument; (Implement Lockout) | 1 |
| 14***93 | Plate-Instrument | 1 |
118-1084 Cooler Ar-Hydraulic Oil
| 11***14 | Cooler Group-Hydraulic Oil | 1 |
| 11***27 | Lines Group-Hydraulic Fan | 1 |
| 11***84 | Cooler Ar-Hydraulic Oil | 1 |
122-6340 Cooler Ar-Hydraulic Oil
| 12***39 | Cooler Group-Hydraulic Oil | 1 |
| 12***40 | Cooler Ar-Hydraulic Oil | 1 |
118-0914 Cooler Gp-Hydraulic Oil
| 11***14 | Cooler Group-Hydraulic Oil | 1 |
| 15***93 | Core As-Oil Cooler | 1 |
| 16***49 | Plate | 1 |
122-6339 Cooler Gp-Hydraulic Oil
| 12***39 | Cooler Group-Hydraulic Oil | 1 |
| 12***78 | Hinge | 1 |
| 12***82 | Plate | 1 |
119-1060 Cylinder Gp-Lift
| 10***17 | Washer; (36.7x77x6-mm Thk) | 1 |
| 11***60 | Cylinder Group-Lift | 1 |
| 11***62 | Cylinder As | 1 |
118-8105 Cylinder Gp-Tilt
| 11***49 | Lug | 2 |
| 11***05 | Cylinder Group-Tilt | 1 |
| 11***06 | Cylinder As | 1 |
113-3986 Filter & Mtg Gp-Hydraulic
| 11***86 | Filter & Mtg Group-Hydraulic | 1 |
| 11***87 | Bracket | 1 |
| 15***91 | Filter Group-Oil | 1 |
158-3491 Filter Gp-Oil
| 12***18 | Filter-Oil; (Ultra High Efficiency)(Hydraulic) | 1 |
| 15***91 | Filter Group-Oil | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
196-4191 Fitting Gp-Hydraulic -Quick Disconnect
| 15***17 | Cap-Dust | 1 |
| 15***18 | Cap-Dust | 1 |
| 19***25 | Fitting As; (Quick Disconnect, Female) | 1 |
153-2985 Gauge Gp-Sight -Hydraulic Oil Level
| 12***53 | Bolt; (M12x1.75x46.5-mm) | 2 |
| 15***85 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 5J***74 | Seal-O-Ring (Id=15.54mm) | 4 |
118-1086 Hydraulic Ar
| 11***38 | Lines Group-Pilot | 1 |
| 11***86 | Hydraulic Ar | 1 |
| 11***87 | Valve & Mtg Group-Main Control; -2-Function | 1 |
118-0902 Hydraulic Ar
| 11***52 | Kickout & Positioner Group | 1 |
| 11***75 | Tank & Mtg Group-Hydraulic | 1 |
| 11***86 | Filter & Mtg Group-Hydraulic | 1 |
155-8912 Hydraulic Ar
| 11***87 | Valve & Mtg Group-Main Control; -2-Function | 1 |
| 11***90 | Control Group-Pilot Operated Hydraulic | 1 |
| 11***91 | Lines Group-Pilot | 1 |
118-1089 Hydraulic Ar
| 11***87 | Valve & Mtg Group-Main Control; -2-Function | 1 |
| 11***89 | Hydraulic Ar | 1 |
| 11***90 | Control Group-Pilot Operated Hydraulic | 1 |
118-1097 Hydraulic Ar-3 Valve
| 11***36 | Lines Group-Pilot | 1 |
| 11***94 | Lines Group-Front | 1 |
| 11***95 | Valve & Mtg Group-Main Control; -3-Function | 1 |
118-1092 Hydraulic Ar-3 Valve
| 11***92 | Hydraulic Ar-3 Valve | 1 |
| 11***93 | Lines Group-Pilot | 1 |
| 11***94 | Lines Group-Front | 1 |
155-8913 Hydraulic Ar-3 Valve
| 11***36 | Lines Group-Pilot | 1 |
| 11***94 | Lines Group-Front | 1 |
| 11***95 | Valve & Mtg Group-Main Control; -3-Function | 1 |
113-3652 Kickout & Positioner Gp
| 09***40 | Bar | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
118-1094 Lines Gp-Front
| 11***92 | Tube As | 1 |
| 11***93 | Tube As | 1 |
| 11***96 | Bracket | 1 |
118-0990 Lines Gp-Hydraulic
| 11***94 | Manifold | 1 |
| 11***22 | Tube | 1 |
| 11***72 | Hose As | 1 |
194-7270 Lines Gp-Hydraulic Fan
| 14***16 | Connector Group | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***51 | Elbow Group | 1 |
118-0927 Lines Gp-Hydraulic Fan
| 11***27 | Lines Group-Hydraulic Fan | 1 |
| 12***44 | Hose As | 1 |
| 12***45 | Hose As | 1 |
194-7269 Lines Gp-Hydraulic Fan
| 12***24 | Tube As | 1 |
| 12***25 | Tube As | 1 |
| 14***16 | Connector Group | 1 |
118-0861 Lines Gp-Lift Cylinder
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 11***52 | Bolt-Hex Head; (M4x0.7x10mm) | 4 |
| 11***61 | Lines Group-Lift Cylinder | 1 |
197-3234 Lines Gp-Pilot
| 10***73 | Clip | 2 |
| 11***82 | Plate As | 1 |
| 11***39 | Plate As | 1 |
197-3237 Lines Gp-Pilot
| 10***73 | Clip | 2 |
| 11***82 | Plate As | 1 |
| 11***39 | Plate As | 1 |
118-0936 Lines Gp-Pilot
| 10***73 | Clip | 2 |
| 10***31 | Connector-Filter | 1 |
| 11***99 | Valve Group-Pressure Reducing | 1 |
118-1093 Lines Gp-Pilot
| 10***73 | Clip | 2 |
| 10***31 | Connector-Filter | 1 |
| 11***99 | Valve Group-Pressure Reducing | 1 |
118-0938 Lines Gp-Pilot
| 10***73 | Clip | 2 |
| 10***31 | Connector-Filter | 1 |
| 11***99 | Valve Group-Pressure Reducing | 1 |
118-1091 Lines Gp-Pilot
| 10***73 | Clip | 2 |
| 10***31 | Connector-Filter | 1 |
| 11***99 | Valve Group-Pressure Reducing | 1 |
197-3210 Lines Gp-Pilot
| 10***73 | Clip | 2 |
| 10***31 | Connector-Filter | 1 |
| 11***50 | Accumulator Group-Pilot Oil; -Charged | 1 |
218-3673 Lines Gp-Ride Control
| 10***42 | Hose Assem. | 1 |
| 14***85 | Hose As | 1 |
| 14***22 | Adapter; (-10orb/-12orfs) | 2 |
118-0862 Lines Gp-Tilt Cylinder
| 11***62 | Lines Group-Tilt Cylinder | 1 |
| 11***82 | Tube As | 1 |
| 11***85 | Bracket As | 1 |
226-2758 Magnet Gp-Pilot Valve
| 10***92 | Sleeve | 1 |
| 10***90 | Clapper | 2 |
| 10***39 | Coil Assem. | 1 |
224-8604 Magnet Gp-Pilot Valve
| 10***90 | Clapper | 2 |
| 10***39 | Coil Assem. | 2 |
| 12***74 | Spring | 2 |
113-4000 Motor & Mtg Gp-Hydraulic Fan
| 00***47 | Seal-Lip Type | 1 |
| 09***36 | Ring; (Retaining) | 1 |
| 11***02 | Mount As | 1 |
192-7491 Motor & Mtg Gp-Hydraulic Fan
| 19***91 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 19***39 | Motor Group-Gear; -Reversible Fan-Hydraulic Fan | 1 |
| 20***06 | Mount As | 1 |
194-7266 Motor Ar-Hydraulic Fan
| 11***00 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 19***66 | Motor Ar-Hydraulic Fan | 1 |
| 19***69 | Lines Group-Hydraulic Fan | 1 |
194-7267 Motor Ar-Hydraulic Fan
| 19***91 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 19***67 | Motor Ar-Hydraulic Fan | 1 |
| 19***70 | Lines Group-Hydraulic Fan | 1 |
192-7739 Motor Gp-Gear -Reversible Fan-Hydraulic Fan
| 09***95 | Pin, Dowel | 4 |
| 11***32 | Adapter-Fan | 1 |
| 13***35 | Seal-Shaft | 1 |
119-1421 Motor Gp-Gear
| 11***32 | Adapter-Fan | 1 |
| 11***21 | Motor Group-Gear | 1 |
| 13***96 | Motor Group-Gear | 1 |
131-0296 Motor Gp-Gear
| 00***47 | Seal-Lip Type | 1 |
| 09***36 | Ring; (Retaining) | 1 |
| 13***96 | Motor Group-Gear | 1 |
164-7937 Motor Gp-Gear -Fan
| 08***91 | Valve As-Check; (Hydraulic Fan Oil) | 1 |
| 09***95 | Pin, Dowel | 4 |
| 11***32 | Adapter-Fan | 1 |
160-6299 Pivot Gp-Pilot Valve
| 14***81 | Spacer | 1 |
| 14***15 | Pin-Adjustment | 2 |
| 14***17 | Retainer | 1 |
147-2038 Pivot Gp-Pilot Valve -Tilt
| 14***81 | Spacer | 1 |
| 14***15 | Pin-Adjustment | 2 |
| 14***17 | Retainer | 1 |
160-6300 Pivot Gp-Pilot Valve -Lift
| 14***81 | Spacer | 1 |
| 14***15 | Pin-Adjustment | 2 |
| 14***17 | Retainer | 2 |
147-3322 Plate Gp-Pilot Valve -Joystick
| 14***15 | Pin-Adjustment | 3 |
| 14***17 | Retainer | 3 |
| 14***22 | Plate Group-Pilot Valve; -Joystick | 1 |
163-4636 Plate Gp-Pilot Valve
| 13***97 | Plate | 1 |
| 13***98 | Retainer | 1 |
| 14***56 | Retainer | 1 |
175-9437 Plate Gp-Pilot Valve
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 14***56 | Retainer | 3 |
| 14***32 | Plate | 3 |
163-4637 Plate Gp-Pilot Valve
| 13***97 | Plate | 1 |
| 13***98 | Retainer | 1 |
| 14***51 | Plate As | 1 |
175-9436 Plate Gp-Pilot Valve
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 14***56 | Retainer | 2 |
| 14***32 | Plate | 2 |
118-0925 Pump & Mtg Gp-Brake & Hyd Fan
| 11***25 | Pump & Mtg Group-Brake & Hydraulic Fan | 1 |
| 11***20 | Pump Group-Gear | 1 |
| 12***62 | Gear (50 Teeth) | 1 |
118-1083 Pump & Mtg Gp-Impl & Steering
| 11***83 | Pump & Mtg Group-Impl & Steering | 1 |
| 11***98 | Pump Group-Piston & Vane; -Implement, Steering, Pilot | 1 |
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 1 |
120-0140 Pump Gp-Piston -Steering, Pilot
| 00***55 | Ring-Retaining | 1 |
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 2 |
| 03***28 | Seal-O-Ring | 1 |
119-7698 Pump Gp-Piston & Vane -Implement, Steering, Pilot
| 11***98 | Pump Group-Piston & Vane; -Implement, Steering, Pilot | 1 |
| 12***40 | Pump Group-Piston; -Steering, Pilot | 1 |
| 12***45 | Shaft-Pump | 1 |
113-3975 Tank & Mtg Gp-Hydraulic
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***14 | Seal-O-Ring (Id=9.80mm) | 4 |
| 09***17 | Seal-O-Ring (Id=13.80mm) | 4 |
190-4382 Tank & Mtg Gp-Hydraulic
| 13***34 | Breather; (Hydraulic Oil) | 1 |
| 14***56 | Elbow As | 1 |
| 14***42 | Tee As. | 1 |
190-4381 Tank Gp-Hydraulic
| 13***30 | Screen; (Hydraulic Oil) | 2 |
| 14***37 | Cap As-Filler; (Hydraulic Tank) | 1 |
| 19***79 | Tank As-Hydraulic | 1 |
113-3976 Tank Gp-Hydraulic
| 11***76 | Tank Group-Hydraulic | 1 |
| 11***91 | Plate As | 1 |
| 11***92 | Tank As; (Hydraulic Oil) | 1 |
118-1087 Valve & Mtg Gp-Main Control -2-Function
| 11***87 | Valve & Mtg Group-Main Control; -2-Function | 1 |
| 13***34 | Valve Group-Main Control; -2-Function | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
118-1095 Valve & Mtg Gp-Main Control -3-Function
| 11***95 | Valve & Mtg Group-Main Control; -3-Function | 1 |
| 13***35 | Valve Group-Main Control; -3-Function | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
9t-7634 Valve Gp-Check -Makeup
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 10***91 | Seal Kit | 1 |
| 9T***34 | Valve Group-Check; -Makeup | 1 |
133-4234 Valve Gp-Main Control -2-Function
| 13***34 | Valve Group-Main Control; -2-Function | 1 |
| 14***10 | Plug As; (16.36mm Id) | 1 |
| 18***08 | Valve Group-Relief; -Lift Cylinder | 1 |
133-4235 Valve Gp-Main Control -3-Function
| 13***35 | Valve Group-Main Control; -3-Function | 1 |
| 14***10 | Plug As; (16.36mm Id) | 1 |
| 18***08 | Valve Group-Relief; -Lift Cylinder | 1 |
112-1817 Valve Gp-Manual -Lowering Control
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 20***71 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
142-1424 Valve Gp-Pilot -Auxiliary
| 10***72 | Boot | 1 |
| 10***73 | Clamp-Boot | 1 |
| 10***28 | Valve Group-Pilot Cartridge; -Cartridge | 2 |
201-3361 Valve Gp-Pilot -Joystick, 3-Function
| 03***39 | Ring-Retaining | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 1 |
122-6238 Valve Gp-Pilot -Joystick, 2-Function
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***92 | Sleeve | 1 |
107-9087 Valve Gp-Pilot -Tilt
| 10***72 | Boot | 1 |
| 10***73 | Clamp-Boot | 1 |
| 10***28 | Valve Group-Pilot Cartridge; -Cartridge | 2 |
122-6345 Valve Gp-Pilot -Joystick, 3-Function
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***45 | Valve Group-Pilot; -Joystick, 3-Function | 1 |
| 12***28 | Plate As-Mounting | 1 |
201-3359 Valve Gp-Pilot -Joystick, 2-Function
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 14***52 | Boot | 1 |
| 14***81 | Spacer | 1 |
142-1423 Valve Gp-Pilot -Joystick, Lift, Tilt
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 2 |
| 10***92 | Sleeve | 1 |
| 10***90 | Clapper | 4 |
201-3362 Valve Gp-Pilot
| 03***39 | Ring-Retaining | 6 |
| 13***92 | Boot | 3 |
| 14***36 | Screen As; (Blade Control Valve) | 1 |
122-6239 Valve Gp-Pilot -3-Function
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***87 | Valve Group-Pilot | 1 |
| 10***88 | Valve Group-Pilot | 1 |
107-9088 Valve Gp-Pilot -Lift
| 10***72 | Boot | 1 |
| 10***73 | Clamp-Boot | 1 |
| 10***28 | Valve Group-Pilot Cartridge; -Cartridge | 2 |
122-6344 Valve Gp-Pilot -2-Function
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***87 | Valve Group-Pilot | 1 |
| 10***88 | Valve Group-Pilot | 1 |
201-3360 Valve Gp-Pilot -2-Function
| 03***39 | Ring-Retaining | 4 |
| 13***92 | Boot | 2 |
| 14***36 | Screen As; (Blade Control Valve) | 1 |
202-1233 Valve Gp-Pilot Cartridge
| 14***19 | Retainer | 1 |
| 15***25 | Plug-Stop | 1 |
| 15***26 | Spring; (Small) | 1 |
168-6504 Valve Gp-Pilot Cartridge
| 14***19 | Retainer | 1 |
| 15***25 | Plug-Stop | 1 |
| 15***26 | Spring; (Small) | 1 |
110-1244 Valve Gp-Pilot Cartridge
| 10***37 | Plunger | 1 |
| 10***46 | Seat-Spring | 1 |
| 11***44 | Valve Group-Pilot Cartridge | 1 |
202-2558 Valve Gp-Pilot Cartridge
| 14***19 | Retainer | 1 |
| 15***25 | Plug-Stop | 1 |
| 15***26 | Spring; (Small) | 1 |
107-3828 Valve Gp-Pilot Cartridge
| 03***28 | Seal-O-Ring | 1 |
| 10***27 | Seat-Spring | 1 |
| 10***28 | Valve Group-Pilot Cartridge; -Cartridge | 1 |
168-6503 Valve Gp-Pilot Cartridge
| 14***19 | Retainer | 1 |
| 15***25 | Plug-Stop | 1 |
| 15***26 | Spring; (Small) | 1 |
197-0727 Valve Gp-Pilot Cartridge
| 10***37 | Plunger | 1 |
| 10***46 | Seat-Spring | 1 |
| 12***20 | Spring | 1 |
130-6235 Valve Gp-Pump Control -Pressure, Flow Compensator
| 13***22 | Spring-Margin | 1 |
| 13***35 | Valve Group-Press & Flow Cmpnstr; -Pressure, Flow Compensator-Steering, Pilot | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
184-9975 Valve Gp-Pressure Reducing
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***43 | Seal-O-Ring | 1 |
| 18***75 | Valve Group-Pressure Reducing | 1 |
111-7299 Valve Gp-Pressure Reducing
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 11***99 | Valve Group-Pressure Reducing | 1 |
| 11***96 | Relife Valve Group | 1 |
185-5209 Valve Gp-Pressure Reducing -Pilot Oil
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 11***97 | Check Valve Group | 1 |
| 12***85 | Ring-Backup | 1 |
228-0391 Valve Gp-Pump Control -Pressure, Flow Compensator-Steering, Pilot
| 13***22 | Spring-Margin | 1 |
| 17***93 | Plug As | 3 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
122-3567 Valve Gp-Relief
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
341-8323 Valve Gp-Relief -Main
| 34***23 | Valve Group-Relief; -Main | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***42 | Spring | 1 |
108-6428 Valve Gp-Relief -Main
| 10***28 | Valve Group-Relief | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***42 | Spring | 1 |
185-7708 Valve Gp-Relief -Line
| 03***28 | Seal-O-Ring | 1 |
| 13***76 | Seal-O-Ring | 1 |
| 18***08 | Valve Group-Relief; -Lift Cylinder | 1 |
186-0913 Valve Gp-Relief -Line
| 03***79 | Seal-O-Ring (Id=10.82mm) | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 15***03 | Service Kit; (Consist Of Seal, Ring And Spring) | 1 |
186-0905 Valve Gp-Relief -Line
| 03***79 | Seal-O-Ring (Id=10.82mm) | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 15***03 | Service Kit; (Consist Of Seal, Ring And Spring) | 1 |
192-0086 Valve Gp-Ride Control
| 14***46 | Kit-Seal; (Valve) | 1 |
| 16***69 | Orifice As | 1 |
| 19***08 | Cartridge As | 1 |
143-9354 Valve Gp-Shutoff -Hydraulic Lockout
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 12***54 | Plate; (6-mm Thk) | 1 |
| 12***56 | Plate; (4-mm Thk) | 1 |
208-9665 Valve Gp-Shutoff
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***31 | Connector-Filter | 1 |
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
134-9878 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***78 | Valve Group-Solenoid | 1 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
189-2100 Valve Gp-Solenoid -Hydraulic Fan
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 18***00 | Valve Group-Solenoid; -Hydraulic Fan | 1 |
201-0950 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***33 | Coil As; (24-Volt) | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 2 |
Implements
113-3706 Control Gp-Bucket
| 10***13 | Washer-Hard; (22x60x6-mm Thk) | 1 |
| 11***39 | Lever As | 1 |
| 11***06 | Control Group-Bucket | 1 |
Lubrication System
1n-3477 Breather Gp -Crankcase
| 1N***77 | Breather Group; Breather Group | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 5N***85 | Washer-Sealing; (Sealing) | 1 |
7e-3593 Filler Gp-Engine Oil
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
| 6L***09 | Seal-Rubber | 1 |
| 7C***58 | Gasket | 1 |
4p-8183 Filter Gp-Engine Oil
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 23***54 | Gasket | 1 |
| 24***64 | Spring; (Yoke) | 2 |
7w-8420 Fumes Disposal Gp
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 1 |
| 7C***52 | Hose-Disposal; (Fumes)(Fumes) | 1 |
131-1912 Gauge Gp-Oil Level (Dipstick)
| 13***12 | Gauge Group-Oil Level (Dipstick) | 1 |
| 13***95 | Gauge-Oil Level | 1 |
| 15***07 | Tube As | 1 |
7c-2475 Lines Gp-Engine Oil
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
| 6V***40 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 4 |
1w-6030 Lines Gp-Turbocharger Oil
| 1S***57 | Gasket; (Turbocharger-Oil Supply) | 1 |
| 1W***30 | Lines Group-Turbocharger Oil | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
4w-2195 Pump Gp-Engine Oil
| 11***24 | Pump Group-Engine Oil | 1 |
| 4W***95 | Pump Group-Engine Oil; Engine Oil Pump Group | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
115-4138 Pump Gp-Engine Oil
| 11***23 | Pump Group-Engine Oil | 1 |
| 11***38 | Pump Group-Engine Oil | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
200-4497 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
119-2924 Pump Gp-Engine Oil
| 10***05 | Spring | 1 |
| 11***24 | Pump Group-Engine Oil | 1 |
| 2W***77 | Body As-Oil Pump | 1 |
115-4123 Pump Gp-Engine Oil
| 10***05 | Spring | 1 |
| 11***74 | Shaft As | 1 |
| 11***16 | Shaft As-Idler | 1 |
2t-2951 Valve Gp-Fluid Sampling
| 2T***51 | Valve Group-Fluid Sampling; Manual Valve Group (Fluid Sampling) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
Machine Arrangement
118-0901 Chassis Ar
| 11***68 | Guard Group-Fan | 1 |
| 11***49 | Lighting Group-Signal | 1 |
| 11***50 | Wiring Group-Power Train | 1 |
118-0900 Common Ar
| 11***94 | Installation Ar-Engine | 1 |
| 11***00 | Common Ar | 1 |
| 11***01 | Chassis Ar | 1 |
197-7690 Waste Handling Ar
| 11***26 | Guard Group-Crankcase | 1 |
| 11***27 | Guard Group-Power Train | 1 |
| 17***60 | Guard Group-Window | 1 |
Operator Station
107-5980 Air Conditioner & Mounting Gp
| 10***80 | Air Conditioner & Mounting Group; -With Cable Control | 1 |
| 10***70 | Switch As-Rocker; (Air Conditioner Control) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
205-0528 Air Conditioner Ar
| 10***80 | Air Conditioner & Mounting Group; -With Cable Control | 1 |
| 11***78 | Compressor & Mtg Group-Refrig | 1 |
| 12***42 | Panel Group-Side | 1 |
107-3318 Air Conditioner Gp
| 03***26 | Retainer | 1 |
| 03***38 | Clamp | 2 |
| 10***43 | Plate-Orifice | 2 |
180-9873 Air Conditioner Gp
| 03***26 | Retainer | 1 |
| 03***38 | Clamp | 2 |
| 10***43 | Plate-Orifice | 2 |
311-8547 Air Conditioner Gp
| 03***26 | Retainer | 1 |
| 10***41 | Clip; (Slot) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
307-0205 Arm Gp-Window Wiper -Rear
| 13***88 | Clip | 3 |
| 13***95 | Nozzle As-Washer | 1 |
| 19***21 | Bolt-Socket Head; (M6x1x25-mm) | 2 |
214-7636 Arm Gp-Window Wiper -Front
| 13***88 | Clip | 3 |
| 13***90 | Nozzle As-Washer | 1 |
| 19***21 | Bolt-Socket Head; (M6x1x25-mm) | 4 |
8y-5904 Armrest Gp
| 3E***12 | Nut-Square; (3/8-16-Thd) | 1 |
| 6V***87 | Screw-Pan Head; (10-24x1-In) | 4 |
| 8S***03 | Ring-Retaining | 1 |
8y-4200 Armrest Gp -Rh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 1K***72 | Locknut Horn To Guard | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 1 |
8y-6000 Armrest Gp -Lh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 1K***72 | Locknut Horn To Guard | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 1 |
149-0408 Cab Ar
| 10***16 | Rops Group-Enclosed | 1 |
| 10***27 | Pedal Group-Governor | 1 |
| 10***28 | Wiper Group-Window | 1 |
122-6471 Cab Ar-Enclosed Rops
| 10***16 | Rops Group-Enclosed | 1 |
| 10***23 | Control Group-Steering | 1 |
| 10***27 | Pedal Group-Governor | 1 |
205-0524 Cab Ar-Enclosed Rops -Sliding Windows
| 11***22 | Lighting Group-Flood; -4-Lamp, Cab | 1 |
| 13***03 | Door Group-Cab; -With Sliding Windows | 1 |
| 17***49 | Rops Group-Enclosed | 1 |
149-0410 Cab Ar-Enclosed Rops
| 10***16 | Rops Group-Enclosed | 1 |
| 10***27 | Pedal Group-Governor | 1 |
| 10***28 | Wiper Group-Window | 1 |
122-6441 Cab Ar-Enclosed Rops
| 10***16 | Rops Group-Enclosed | 1 |
| 10***23 | Control Group-Steering | 1 |
| 10***27 | Pedal Group-Governor | 1 |
205-0523 Cab Ar-Enclosed Rops
| 10***27 | Pedal Group-Governor | 1 |
| 10***28 | Wiper Group-Window | 1 |
| 10***30 | Duct Group-Cab Air | 1 |
111-7864 Cab Gp-Enclosed Rops
| 10***44 | Glass-Front; (Lh) | 1 |
| 10***45 | Glass-Front; (Center)(Lh) | 1 |
| 10***46 | Glass-Cab Corner; (Lh Rear) | 1 |
174-9755 Cab Gp-Enclosed Rops
| 10***44 | Glass-Front; (Lh) | 1 |
| 10***45 | Glass-Front; (Center)(Lh) | 1 |
| 10***46 | Glass-Cab Corner; (Lh Rear) | 1 |
118-1124 Canopy Ar-Open Rops
| 10***17 | Rops Group-Open | 1 |
| 10***27 | Pedal Group-Governor | 1 |
| 10***43 | Mirror Group-Rear View; -Interior | 1 |
205-0520 Canopy Gp-Open Rops
| 12***68 | Lighting Group-Flood; -4-Lamp, Canopy | 1 |
| 17***64 | Rops Group-Open | 1 |
| 20***20 | Canopy Group-Open Rops | 1 |
117-8278 Compressor & Mtg Gp-Refrig
| 10***22 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
| 11***78 | Compressor & Mtg Group-Refrig | 1 |
| 15***89 | Bracket Assem. | 1 |
3e-1909 Compressor Gp-Refrigerant
| 3E***09 | Compressor Group-Clutch & Refrigerant | 1 |
| 3E***58 | Compressor Group-Refrigerant | 1 |
| 7T***32 | Plug Assem.; (3/8-24) | 1 |
106-5122 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***22 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
119-8200 Condenser Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***45 | Case As-Condenser | 1 |
149-4612 Console Gp-Operator
| 11***49 | Support As | 1 |
| 11***75 | Plate | 1 |
| 14***12 | Console Group-Operator | 1 |
149-4358 Control Gp-Handle -Transmission Downshift
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***62 | Handle Group-Modular; -Joystick, 3-Function-Lift, Tilt, Tip W/Downshift | 1 |
| 14***58 | Control Group-Handle; -Transmission Downshift | 1 |
118-1096 Control Gp-Pilot Operated Hyd
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***50 | Support Assem. | 1 |
118-1088 Control Gp-Pilot Operated Hyd
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***50 | Support Assem. | 1 |
155-8919 Control Gp-Pilot Operated Hyd
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***62 | Screw-Machine; (4-40x0.63-In) | 2 |
118-1099 Control Gp-Pilot Operated Hyd
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***50 | Support Assem. | 1 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
118-1090 Control Gp-Pilot Operated Hyd
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***50 | Support Assem. | 1 |
149-4190 Control Gp-Steering
| 10***07 | Support Assem. | 1 |
| 10***41 | Cover | 1 |
| 11***78 | Cover | 1 |
127-0987 Control Gp-Steering
| 10***07 | Support Assem. | 1 |
| 10***41 | Cover | 1 |
| 11***78 | Cover | 1 |
107-4623 Control Gp-Steering
| 10***23 | Control Group-Steering | 1 |
| 10***07 | Support Assem. | 1 |
| 10***11 | Plate As | 1 |
149-4189 Control Gp-Steering
| 10***07 | Support Assem. | 1 |
| 10***41 | Cover | 1 |
| 11***74 | Seal | 1 |
139-5206 Control Gp-Transmission
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
149-4360 Control Gp-Transmission
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***62 | Screw-Machine; (4-40x0.63-In) | 2 |
130-6260 Control Gp-Transmission
| 10***61 | Wire Assembly; (Rear) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***60 | Control Group-Transmission | 1 |
201-0211 Control Gp-Transmission
| 10***61 | Wire Assembly; (Rear) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***59 | Wedge-Plug Lock; (8-Pin) | 1 |
139-4702 Control Gp-Transmission
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***02 | Control Group-Transmission; -Shift Lever | 1 |
| 15***65 | Kit-Connecting Plug; (8-Pin)(Electronic Control Channel) | 1 |
299-5839 Control Gp-Transmission
| 10***61 | Wire Assembly; (Rear) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***65 | Kit-Connecting Plug; (8-Pin)(Electronic Control Channel) | 1 |
130-6349 Cover Gp-Console
| 11***49 | Support As | 1 |
| 11***75 | Plate | 1 |
| 12***80 | Cover Assem. | 1 |
130-6350 Cover Gp-Console
| 11***49 | Support As | 1 |
| 11***75 | Plate | 1 |
| 11***68 | Lever | 1 |
118-0809 Dash Gp
| 11***09 | Dash Group | 1 |
| 16***87 | Dash Assem. | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 4 |
107-6137 Defroster Gp-Cab
| 10***34 | Switch As; (Defroster) | 1 |
| 10***37 | Defroster Group-Cab | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
194-4441 Defroster Gp-Cab
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 17***04 | Relay As; (Heated Mirror Timer) | 1 |
| 18***63 | Switch As | 1 |
164-4563 Door Gp-Cab -Fixed Window, Lh
| 09***23 | Ring-Retaining; (External) | 2 |
| 10***04 | Insert | 2 |
| 10***17 | Cover; (Lh)(Lh) | 1 |
118-0816 Door Gp-Cab -Rh
| 10***16 | Door Assem. (R.H.) | 1 |
| 10***25 | Hinge Assem. | 2 |
| 11***81 | Glass | 1 |
164-4566 Door Gp-Cab -Sliding Window, Rh
| 09***23 | Ring-Retaining; (External) | 2 |
| 10***04 | Insert | 2 |
| 10***25 | Hinge Assem. | 2 |
231-0318 Door Gp-Cab -Rh
| 09***23 | Ring-Retaining; (External) | 2 |
| 11***01 | Handhold | 1 |
| 11***52 | Handle-Pull | 1 |
137-7603 Door Gp-Cab -Sliding Windows
| 11***15 | Door Group-Cab; (L.H.) | 1 |
| 11***16 | Door Group-Cab; (R.H.) | 1 |
| 13***03 | Door Group-Cab; -With Sliding Windows | 1 |
137-7602 Door Gp-Cab -Fixed Windows
| 11***88 | Door Group-Cab; -Fixed Glass, Lh | 1 |
| 11***89 | Door Group-Cab; -Fixed Glass, Rh | 1 |
| 13***02 | Door Group-Cab; -With Fixed Windows | 1 |
231-0320 Door Gp-Cab -Fixed Window, Rh
| 11***02 | Cover; (Rh)(Rh) | 1 |
| 11***28 | Handle As-Paddle | 1 |
| 14***80 | Ring-Retaining | 1 |
118-0815 Door Gp-Cab -Lh
| 10***15 | Door Assem.; (L.H.) | 1 |
| 10***17 | Cover; (Lh)(Lh) | 1 |
| 10***25 | Hinge Assem. | 2 |
111-0189 Door Gp-Cab -Fixed Glass
| 10***16 | Door Assem. (R.H.) | 1 |
| 10***25 | Hinge Assem. | 2 |
| 11***79 | Glass | 1 |
233-8013 Door Gp-Cab -Fixed Window, Lh
| 09***23 | Ring-Retaining; (External) | 1 |
| 10***17 | Cover; (Lh)(Lh) | 1 |
| 11***00 | Handrail; (Grab) | 1 |
164-4568 Door Gp-Cab
| 16***65 | Door Group-Cab; -Sliding Window, Lh | 1 |
| 16***66 | Door Group-Cab; -Sliding Window, Rh | 1 |
| 16***68 | Door Group-Cab | 1 |
164-4564 Door Gp-Cab -Fixed Window, Rh
| 09***23 | Ring-Retaining; (External) | 2 |
| 10***04 | Insert | 2 |
| 10***25 | Hinge Assem. | 2 |
233-8012 Door Gp-Cab -Sliding Window, Lh
| 09***23 | Ring-Retaining; (External) | 1 |
| 10***17 | Cover; (Lh)(Lh) | 1 |
| 11***00 | Handrail; (Grab) | 1 |
164-4565 Door Gp-Cab -Sliding Window, Lh
| 09***23 | Ring-Retaining; (External) | 2 |
| 10***04 | Insert | 2 |
| 10***17 | Cover; (Lh)(Lh) | 1 |
231-0319 Door Gp-Cab -Sliding Window, Rh
| 11***02 | Cover; (Rh)(Rh) | 1 |
| 11***28 | Handle As-Paddle | 1 |
| 14***80 | Ring-Retaining | 1 |
111-0188 Door Gp-Cab -Fixed Glass
| 10***15 | Door Assem.; (L.H.) | 1 |
| 10***17 | Cover; (Lh)(Lh) | 1 |
| 10***25 | Hinge Assem. | 2 |
107-4630 Duct Gp-Cab Air
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 12 |
| 10***30 | Duct Group-Cab Air | 1 |
| 10***79 | Duct | 1 |
8y-6883 Extension Gp-Backrest -Cloth
| 11***30 | Kit-Cushion; (Cloth Backrest) | 1 |
| 8Y***77 | Pan As-Extension | 1 |
| 8Y***47 | Fastener | 2 |
119-4769 Filter Gp-Cab Air
| 11***38 | Filter Element-Cab Air; (Primary) | 1 |
| 11***44 | Cover | 1 |
| 11***56 | Knob-Control | 4 |
155-5234 Gauge Gp-Fuel Level
| 11***48 | Lamp; (24-Volt, 3-Watt)(Clear)(Fuel Level Gauge) | 1 |
| 15***34 | Gauge Group-Fuel Level; (Fuel Level) | 1 |
| 16***08 | Lamp-Led; (24-Volt, White)(Fuel Level Gauge) | 1 |
137-6351 Guard Gp-Vandalism
| 12***08 | Screw-Hex Socket; (M4x0.7x30-mm) | 4 |
| 13***40 | Plate Assem. | 1 |
| 13***80 | Plate Assem. | 1 |
175-6760 Guard Gp-Window
| 17***46 | Screen As; (Front) | 1 |
| 17***49 | Plate | 2 |
| 17***54 | Screen As; (Rh) | 1 |
175-6750 Guard Gp-Window
| 17***50 | Guard Group-Window | 1 |
| 17***60 | Guard Group-Window | 1 |
148-9562 Control Gp-Handle -Joystick, 3-Function-Downshift
| 14***62 | Handle Group-Modular; -Joystick, 3-Function-Lift, Tilt, Tip W/Downshift | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
107-4629 Heater & Mtg Gp-Cab -With Cable Control
| 10***29 | Heater & Mtg Group-Cab; -With Cable Control | 1 |
| 11***59 | Gasket; (Air Conditioner) | 1 |
| 14***74 | Boot | 1 |
205-0527 Heater Ar-Cab
| 10***29 | Heater & Mtg Group-Cab; -With Cable Control | 1 |
| 12***37 | Panel Group-Side | 1 |
| 12***10 | Lines Group-Cab Heater | 1 |
107-3317 Heater Gp-Cab
| 03***26 | Retainer | 1 |
| 03***38 | Clamp | 2 |
| 10***43 | Plate-Orifice | 2 |
180-9874 Heater Gp-Cab
| 03***26 | Retainer | 1 |
| 03***38 | Clamp | 2 |
| 10***43 | Plate-Orifice | 2 |
131-7783 Heater Gp-Cab
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 4 |
| 03***38 | Clamp | 2 |
| 10***43 | Plate-Orifice | 2 |
108-4582 Housing Gp-Seat Suspension
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
107-4645 Installation Gp-Radio
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***45 | Installation Group-Radio | 1 |
118-7244 Installation Gp-Radio
| 10***45 | Installation Group-Radio | 1 |
| 11***17 | Converter Group-Electrical | 1 |
| 11***44 | Installation Group-Radio | 1 |
8y-6400 Latch Gp
| 6H***56 | Roll Pin--Lever To Compression Release Control Shaft | 1 |
| 7X***66 | Spring-Latch | 1 |
| 8Y***66 | Washer; (14.7x35x1.57-mm Thk) | 1 |
125-3962 Liner Gp-Cab -Lower
| 11***81 | Cover As; (Cab) | 1 |
| 12***96 | Bracket | 1 |
| 12***15 | Kit-Brush Seal; (Cab Liner, Lower) | 1 |
125-3961 Liner Gp-Cab -Lower
| 11***81 | Cover As; (Cab) | 1 |
| 11***61 | Cover | 1 |
| 12***96 | Bracket | 1 |
107-4634 Liner Gp-Cab -Upper
| 10***34 | Liner Group-Cab | 1 |
| 10***32 | Lamp Group-Dome | 1 |
| 14***07 | Plate | 1 |
122-6500 Lines Gp-Air Conditioner
| 10***96 | Clip | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
122-6510 Lines Gp-Cab Heater
| 12***06 | Plate As | 1 |
| 12***10 | Lines Group-Cab Heater | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
107-4642 Mirror Gp-Rear View -Exterior
| 10***42 | Mirror Group-Rear View; -Exterior | 1 |
| 12***21 | Bracket Assem. (L.H.) | 1 |
| 12***22 | Bracket Assem. (R.H.) | 1 |
107-4643 Mirror Gp-Rear View -Interior
| 10***43 | Mirror Group-Rear View; -Interior | 1 |
| 11***56 | Plate | 2 |
| 23***46 | Nut-Jam; (3/8-16-Thd) | 2 |
148-0641 Module Gp-Warning Indicator -With Alarm
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***41 | Module Group-Warning Indicator; -With Alarm | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 11 |
148-0642 Module Gp-Warning Indicator -Without Alarm
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 14***42 | Module Group-Warning Indicator; -Without Alarm | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 8 |
118-6291 Motor Gp-Window Wiper
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***91 | Motor Group-Window Wiper; -Front | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
134-5559 Motor Gp-Window Wiper -Rear
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***59 | Motor Group-Window Wiper; -Rear | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
147-7969 Motor Gp-Window Wiper -Front
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***69 | Motor Group-Window Wiper; -24-Volt | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
134-5560 Motor Gp-Window Wiper -Front
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***60 | Motor Group-Window Wiper; -Front | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
118-6290 Motor Gp-Window Wiper
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***90 | Motor Group-Window Wiper; -Rear | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
155-5784 Motor Gp-Window Wiper -Rear
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
| 15***84 | Motor Group-Window Wiper; -24-Volt | 1 |
155-5783 Motor Gp-Window Wiper -Front
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
| 15***83 | Motor Group-Window Wiper; -Front | 1 |
147-7970 Motor Gp-Window Wiper -Rear
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***70 | Motor Group-Window Wiper; -24-Volt | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
128-0781 Mounting Gp-Cab
| 12***81 | Mounting Group-Cab | 1 |
| 12***82 | Sheet As | 1 |
| 12***83 | Sheet As | 1 |
133-6561 Mounting Gp-Cab
| 12***83 | Sheet As | 1 |
| 12***85 | Sheet As | 1 |
| 12***35 | Sheet As | 1 |
205-0521 Operator Ar
| 10***27 | Pedal Group-Governor | 1 |
| 10***43 | Mirror Group-Rear View; -Interior | 1 |
| 11***08 | Support Group-Seat | 1 |
149-0412 Operator Ar
| 10***17 | Rops Group-Open | 1 |
| 10***27 | Pedal Group-Governor | 1 |
| 10***43 | Mirror Group-Rear View; -Interior | 1 |
205-0621 Operator Ar
| 12***58 | Operator Ar-Canopy | 1 |
| 20***21 | Operator Ar | 1 |
205-0620 Operator Ar
| 12***70 | Operator Ar-Enclosed Rops | 1 |
| 20***20 | Operator Ar | 1 |
128-0158 Operator Ar-Canopy
| 11***24 | Canopy Ar-Open Rops | 1 |
| 12***37 | Panel Group-Side | 1 |
| 12***62 | Liner Group-Cab; -Lower | 1 |
122-6440 Operator Ar-Enclosed Rops
| 10***37 | Defroster Group-Cab | 1 |
| 12***37 | Panel Group-Side | 1 |
| 12***40 | Operator Ar-Enclosed Rops | 1 |
122-6470 Operator Ar-Enclosed Rops
| 10***37 | Defroster Group-Cab | 1 |
| 11***78 | Compressor & Mtg Group-Refrig | 1 |
| 12***42 | Panel Group-Side | 1 |
108-8421 Pan Gp-Backrest -Lumbar
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
| 10***23 | Shaft As-Lumbar | 1 |
| 10***24 | Pan-Lumbar | 1 |
8y-5992 Pan Gp-Seat
| 3K***97 | Pin 3.18 mm(.125 In.) Diameter | 4 |
| 6V***56 | Ring-Retaining | 2 |
| 8Y***92 | Pan As-Seat; (Bottom) | 1 |
157-0298 Panel Gp-Instrument
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
157-0299 Panel Gp-Instrument
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
113-3644 Panel Gp-Instrument -Gauges
| 06***91 | Terminal-Blade; (14-Ga To 18-Ga) | 7 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
149-4356 Panel Gp-Instrument -Gauges
| 06***91 | Terminal-Blade; (14-Ga To 18-Ga) | 11 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 11 |
170-4573 Panel Gp-Instrument
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***16 | Plug | 1 |
174-9730 Pedal Gp-Brake
| 10***56 | Pedal Assem.; (L.H.) | 1 |
| 11***32 | Pedal Assem.; (R.H) | 1 |
| 17***25 | Support As | 1 |
243-0060 Pedal Gp-Governor
| 17***76 | Governor Pedal Hardware Kit; (Consists Of U-Bolt, Clamp, Washer And Locknut) | 1 |
| 24***60 | Plug-Bronze, Pedal Group-Governor | 1 |
| 24***62 | Kit-Repair; (Governor Pedal) | 1 |
107-4627 Pedal Gp-Governor
| 10***27 | Pedal Group-Governor | 1 |
| 24***60 | Plug-Bronze, Pedal Group-Governor | 1 |
| 9X***45 | Screw-Truss Head (M6x1x20mm); (M6x1x20-mm) | 3 |
153-5360 Platform Ar -With A/C
| 10***23 | Control Group-Steering | 1 |
| 10***27 | Pedal Group-Governor | 1 |
| 10***30 | Duct Group-Cab Air | 1 |
117-9621 Platform Gp-Operator
| 10***56 | Pedal Assem.; (L.H.) | 1 |
| 11***32 | Pedal Assem.; (R.H) | 1 |
| 11***63 | Floorplate As | 1 |
219-2849 Platform Gp-Operator -With Brake Pedals
| 17***30 | Pedal Group-Brake | 1 |
| 21***49 | Platform Group-Operator; -With Brake Pedals | 1 |
| 21***50 | Floorplate As | 1 |
174-9749 Rops Gp-Enclosed
| 09***79 | Plug | 7 |
| 17***30 | Pedal Group-Brake | 1 |
| 17***49 | Rops Group-Enclosed | 1 |
107-4616 Rops Gp-Enclosed
| 10***16 | Rops Group-Enclosed | 1 |
| 11***64 | Cab Group-Enclosed Rops | 1 |
| 11***21 | Platform Group-Operator | 1 |
107-4617 Rops Gp-Open
| 10***17 | Rops Group-Open | 1 |
| 11***65 | Canopy As | 1 |
| 11***21 | Platform Group-Operator | 1 |
174-9764 Rops Gp-Open
| 11***55 | Cover | 1 |
| 17***30 | Pedal Group-Brake | 1 |
| 17***63 | Canopy As | 1 |
118-7250 Screen Gp-Sun -Cab
| 11***50 | Screen Group-Sun; -Cab | 1 |
| 11***73 | Hook-Retainer | 2 |
107-5978 Seat & Mounting Gp
| 10***78 | Seat & Mounting Group | 1 |
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
118-0817 Seat & Mounting Gp
| 10***92 | Seat Group-Suspension | 1 |
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 4 |
| 11***17 | Seat & Mounting Group | 1 |
122-4617 Seat Belt Gp -Retractable
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 4D***32 | Locknut (7/16-20 Thd) | 1 |
129-7253 Seat Belt Gp -Retractable
| 12***53 | Seat Belt Group; -Retractable | 1 |
| 1J***98 | Bolt; (7/16-20x3.5-In) | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
156-1148 Seat Belt Gp -Retractable
| 15***48 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 1L***80 | Bolt; (7/16-20x1.5-In) | 1 |
119-7128 Seat Gp -Cloth
| 11***28 | Seat Group | 1 |
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 8Y***00 | Armrest Group | 1 |
107-5977 Seat Gp -Cloth
| 10***77 | Seat Group; -Cloth | 1 |
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 4 |
| 11***36 | Plate | 1 |
8y-6882 Seat Gp -Cloth, Lumbar
| 06***03 | Shim (.060mm Thk); (1.52-mm Thk) | 4 |
| 09***78 | Pin-Spring | 1 |
| 09***14 | Pin, Clevis | 1 |
8y-6977 Seat Gp-Suspension
| 10***82 | Suspension Group-Seat; -Contour-Shock Absorber | 1 |
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 14***45 | Kit-Slider Block; (Suspension Seat) | 1 |
118-0819 Seat Gp-Suspension
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 2 |
| 11***19 | Seat Group-Suspension | 1 |
119-8263 Seat Gp-Suspension -Cloth
| 11***52 | Kit-Frame As; (Seat)(Seat) | 1 |
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
108-2192 Seat Gp-Suspension -Vinyl
| 10***92 | Seat Group-Suspension | 1 |
| 11***51 | Upper Assem. Kit; (Included Marked J) | 1 |
| 11***52 | Kit-Frame As; (Seat)(Seat) | 1 |
118-0808 Support Gp-Seat
| 11***08 | Support Group-Seat | 1 |
| 11***10 | Cover Assem. | 1 |
| 7T***99 | Link | 2 |
150-7718 Suspension Gp-Seat -Air
| 10***17 | Bumper | 2 |
| 12***57 | Shaft | 2 |
| 12***28 | Kit-Roller; (Incls Parts Marked S) | 1 |
108-4082 Suspension Gp-Seat -Contour
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
119-7027 Suspension Gp-Seat -Air
| 10***17 | Bumper | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***27 | Suspension Group-Seat; -Air | 1 |
107-4641 Visor Gp-Cab
| 10***41 | Visor Group-Cab | 1 |
| 6V***32 | Nut-Weld (M6x6 Thd); (M10x1.5) (Weld) | 2 |
| 9R***03 | Plate | 2 |
131-1236 Washer Gp-Window
| 13***36 | Washer Group-Window | 1 |
| 13***37 | Bracket Assem. | 1 |
| 13***38 | Bracket As | 1 |
152-2764 Washer Gp-Window
| 15***63 | Reservoir; (Window Washer) | 1 |
| 15***64 | Washer Group-Window | 1 |
| 7T***90 | Pump As; (Washer) | 2 |
130-3643 Window Gp
| 09***57 | Screw-Machine; (M5x0.8x5.2-mm) | 6 |
| 13***43 | Window Group; -Lh | 1 |
| 13***70 | Seal; (326-cm) | 0 |
180-2535 Window Gp-Door -Cab
| 13***70 | Seal; (326-cm) | 0 |
| 14***69 | Stop | 1 |
| 15***15 | Gasket | 1 |
107-4628 Wiper Gp-Window
| 10***42 | Wiper Pivot Group; (Front Window) | 1 |
| 10***28 | Wiper Group-Window | 1 |
| 11***69 | Arm As-Window Wiper; (Rear) | 1 |
101-0742 Wiper Pivot Gp
| 10***42 | Wiper Pivot Group; (Front Window) | 1 |
| 20***23 | Cap; (Wiper) | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
Power Train
6d-0337 Valve Gp-Tire
| 2D***28 | Core-Valve | 1 |
| 2D***29 | Grommet | 1 |
| 2D***30 | Washer-Ring | 1 |
166-4468 Axle Ar-Fixed
| 10***09 | Differential Group | 1 |
| 15***46 | Differential Group-Limited Slip | 1 |
| 16***75 | Brake & Planetary Group; -Single Disc | 2 |
166-4467 Axle Ar-Fixed
| 15***42 | Differential Group; -Standard | 1 |
| 16***75 | Brake & Planetary Group; -Single Disc | 2 |
| 16***61 | Housing Group-Fixed Axle | 1 |
117-8250 Axle Ar-Fixed
| 11***15 | Brake & Planetary Group | 2 |
| 11***50 | Axle Ar-Fixed | 1 |
| 11***55 | Housing Group-Fixed Axle | 1 |
117-8251 Axle Ar-Fixed
| 10***09 | Differential Group | 1 |
| 11***15 | Brake & Planetary Group | 2 |
| 11***51 | Axle Ar-Fixed | 1 |
117-8253 Axle Ar-Oscillating
| 10***09 | Differential Group | 1 |
| 11***15 | Brake & Planetary Group | 2 |
| 11***53 | Axle Ar-Oscillating | 1 |
117-8252 Axle Ar-Oscillating
| 11***15 | Brake & Planetary Group | 2 |
| 11***52 | Axle Ar-Oscillating | 1 |
| 11***56 | Housing Group-Oscillating Axle | 1 |
117-8254 Axle Ar-Oscillating
| 11***15 | Brake & Planetary Group | 2 |
| 11***54 | Axle Ar-Oscillating | 1 |
| 11***56 | Housing Group-Oscillating Axle | 1 |
166-4464 Axle Ar-Oscillating -No Spin
| 11***57 | Gear Group-Bevel | 1 |
| 11***58 | Differential Group-Nospin | 1 |
| 16***75 | Brake & Planetary Group; -Single Disc | 2 |
166-4459 Axle Ar-Oscillating
| 11***57 | Gear Group-Bevel | 1 |
| 15***42 | Differential Group; -Standard | 1 |
| 16***75 | Brake & Planetary Group; -Single Disc | 2 |
166-4462 Axle Ar-Oscillating
| 11***57 | Gear Group-Bevel | 1 |
| 15***46 | Differential Group-Limited Slip | 1 |
| 16***75 | Brake & Planetary Group; -Single Disc | 2 |
117-1615 Brake & Planetary Gp
| 11***27 | Dowel | 3 |
| 11***11 | Gear-Sun; (18-Teeth) | 1 |
| 11***12 | Gear-Planetary; (33-Teeth) | 3 |
163-5775 Brake & Planetary Gp -Single Disc
| 11***27 | Dowel | 3 |
| 11***11 | Gear-Sun; (18-Teeth) | 1 |
| 11***12 | Gear-Planetary; (33-Teeth) | 3 |
116-4862 Case & Parts Gp-Planetary
| 00***69 | Cup-Roller Bearing | 2 |
| 10***70 | Cover Assem. | 1 |
| 10***64 | Cover Assem. | 1 |
201-3319 Case & Parts Gp-Planetary
| 00***69 | Cup-Roller Bearing | 2 |
| 12***01 | Clip | 1 |
| 12***02 | Clip Assem. | 1 |
116-4875 Clutch Gp -1st, 3rd
| 10***28 | Hub Assem. | 1 |
| 11***71 | Piston | 1 |
| 11***75 | Clutch Group; -1st, 3rd | 1 |
118-4918 Clutch Gp -Reverse, Second
| 10***27 | Hub Assem. | 1 |
| 10***28 | Hub Assem. | 1 |
| 11***70 | Piston | 1 |
118-4921 Clutch Gp -Forward High, Forward Low
| 10***27 | Hub Assem. | 1 |
| 10***30 | Hub Assem. | 1 |
| 11***70 | Piston | 1 |
120-6122 Control Gp-Transmission Hyd
| 12***22 | Control Group-Transmission Hydraulic | 1 |
| 12***23 | Valve Group-Transmission Control | 1 |
| 1T***38 | Washer | 17 |
179-6564 Cooler Ar-Axle Oil
| 14***44 | Lines Group-Axle Oil Cooler | 1 |
| 17***55 | Guard Group-Crankcase | 1 |
| 17***18 | Wiring Group-Axle Oil Cooler | 1 |
213-4311 Cooler Ar-Axle Oil
| 14***44 | Lines Group-Axle Oil Cooler | 1 |
| 17***55 | Guard Group-Crankcase | 1 |
| 21***11 | Cooler Ar-Axle Oil | 1 |
180-7501 Cover Gp-Transmission
| 18***01 | Cover Group-Transmission | 1 |
| 19***56 | Cover-Transmission | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 4 |
151-6142 Differential Gp -Standard
| 15***42 | Differential Group; -Standard | 1 |
| 21***80 | Washer-Thrust | 2 |
| 4E***04 | Case As-Differential | 1 |
8r-2657 Differential Gp -Standard
| 5V***70 | Washer-Thrust | 2 |
| 8R***03 | Pinion-Differential Bevel; (10-Teeth)(16 Teeth) | 2 |
| 8R***05 | Gear-Differential Bevel; (16-Teeth) | 2 |
103-2009 Differential Gp-Limited Slip
| 10***09 | Differential Group | 1 |
| 10***39 | Gear-Differential Bevel; (14-Teeth)(14 Teeth Ea) | 2 |
| 10***40 | Pinion; (9 Teeth) Ea | 4 |
159-7446 Differential Gp-Limited Slip
| 10***39 | Gear-Differential Bevel; (14-Teeth)(14 Teeth Ea) | 2 |
| 10***40 | Pinion; (9 Teeth) Ea | 4 |
| 10***41 | Shaft-Pinion | 2 |
4e-6103 Differential Gp-Nospin
| 3V***05 | Spring-Conical | 2 |
| 3V***06 | Retainer | 2 |
| 3V***08 | Holdout Ring & Clutch As | 2 |
117-8258 Differential Gp-Nospin
| 11***58 | Differential Group-Nospin | 1 |
| 4E***03 | Differential Group-Nospin; Differential Gp-No-Spin | 1 |
| 4E***04 | Case As-Differential | 1 |
141-8615 Drive Gp-Flexible Coupling
| 13***93 | Plate | 1 |
| 13***95 | Plate As | 1 |
| 14***15 | Drive Group-Flexible Coupling | 1 |
146-6274 Drive Gp-Pump -Transmission
| 10***99 | Bearing-Ball (88.9mm Id) | 1 |
| 14***21 | Gear-Drive; (72-Teeth) | 1 |
| 14***74 | Drive Group-Pump; -Transmission | 1 |
118-0849 Filler Gp-Power Train Oil
| 11***49 | Filler Group-Power Train Oil | 1 |
| 11***50 | Tube As | 1 |
| 12***53 | Tube Group | 1 |
118-0851 Filter & Lines Gp-Transmission
| 10***91 | Hose Assem. | 0 |
| 11***51 | Filter & Lines Group-Transmission | 1 |
| 12***56 | Filter Group-Oil | 1 |
122-6456 Filter Gp-Oil -Power Train
| 12***56 | Filter Group-Oil | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
129-8734 Gauge Gp-Sight -Power Train Oil
| 12***52 | Seal-O-Ring | 4 |
| 12***53 | Bolt; (M12x1.75x46.5-mm) | 2 |
| 12***34 | Gauge Group-Sight; -Power Train Oil | 1 |
9u-3738 Gear Gp-Bevel
| 1K***90 | Cone-Roller Bearing | 1 |
| 1K***91 | Cup Output Shaft Inner; Cup-Output Shaft-Inner | 1 |
| 20***74 | Set-Bevel Gear & Pinion; (14-Teeth) | 1 |
117-8257 Gear Gp-Bevel
| 11***33 | Yoke As | 1 |
| 11***57 | Gear Group-Bevel | 1 |
| 1K***90 | Cone-Roller Bearing | 1 |
116-4863 Gear Gp-Input Transfer
| 00***71 | Cone-Bearing | 2 |
| 11***95 | Shaft-Input | 1 |
| 11***63 | Gear Group-Input Transfer | 1 |
190-2888 Gear Gp-Input Transfer
| 00***71 | Cone-Bearing | 2 |
| 11***83 | Gear; (46-Teeth)(46 Teeth) | 1 |
| 12***81 | Gear; (32-Teeth)(32 Teeth) | 1 |
116-4880 Gear Gp-Output Transfer
| 10***75 | Yoke-Output | 1 |
| 10***76 | Yoke-Brake Flange | 1 |
| 11***58 | Shaft | 1 |
117-8255 Housing Gp-Fixed Axle
| 06***12 | Ring-Retaining | 2 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 3 |
| 11***19 | Housing-Fixed Axle; (Outer) | 2 |
163-5961 Housing Gp-Fixed Axle
| 06***12 | Ring-Retaining | 2 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 3 |
| 11***19 | Housing-Fixed Axle; (Outer) | 2 |
163-5960 Housing Gp-Oscillating Axle
| 06***12 | Ring-Retaining | 2 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 3 |
| 11***20 | Housing | 2 |
117-8256 Housing Gp-Oscillating Axle
| 06***12 | Ring-Retaining | 2 |
| 11***20 | Housing | 2 |
| 11***56 | Housing Group-Oscillating Axle | 1 |
148-7844 Lines Gp-Axle Oil Cooler
| 05***26 | Tee | 1 |
| 06***93 | Bushing-Reducer; (1/2-14 Nptf) | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
118-0905 Lines Gp-Torque Conv Cooler
| 11***05 | Lines Group-Torque Conv Cooler | 1 |
| 11***06 | Hose As | 1 |
| 11***07 | Hose As | 1 |
118-0880 Mounting Gp-Axle
| 11***80 | Mounting Group-Axle | 1 |
| 6K***87 | Dowel | 2 |
| 7X***65 | Bolt; (M24x3x180-mm) | 12 |
117-7838 Mounting Gp-Rim
| 11***38 | Mounting Group-Rim | 1 |
| 6V***37 | Plain Washer - Hardened | 16 |
| 8T***80 | Bolt; (M24x3x60-mm) | 16 |
118-8595 Mounting Gp-Rim -Axle Oscillation Limitation
| 11***95 | Mounting Group-Rim; -Axle Oscillation Limitation | 1 |
| 4E***57 | Block; (Oscillation Limiter) | 2 |
| 6V***37 | Plain Washer - Hardened | 64 |
147-5071 Mounting Gp-Rim
| 14***71 | Mounting Group-Rim | 1 |
| 8T***67 | Washer-Hard; (26x44x4-mm Thk) | 16 |
| 8T***79 | Bolt-Plt; (M24 X 3.0 X 50) | 16 |
146-6685 Mounting Gp-Rim
| 14***85 | Mounting Group-Rim | 1 |
| 6V***37 | Plain Washer - Hardened | 16 |
| 6V***99 | Bolt; (M24x3.0x50mm) | 16 |
118-0903 Power Train Ar
| 11***60 | Transmission Ar-Power Shift | 1 |
| 11***32 | Shaft Group-Drive | 1 |
| 11***49 | Filler Group-Power Train Oil | 1 |
6y-6712 Pump Gp-Transmission -1-Section Gear
| 3T***94 | Bearing-Sleeve | 4 |
| 5H***52 | Seal 5.73 In. (14.55 cm)Inside Dia. | 1 |
| 5M***87 | Dowel (Part Of 1p***81 Assem.) | 2 |
121-8917 Pump Gp-Transmission -1-Section Gear
| 12***83 | Gear-Drive; (68-Teeth) | 1 |
| 12***17 | Pump Group-Transmission; -1-Section Gear | 1 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
146-6783 Rim Ar
| 14***83 | Rim Ar; -3-Piece | 1 |
| 14***71 | Mounting Group-Rim | 1 |
| 2Q***79 | Rim Group-Demountable | 4 |
117-7836 Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 11***39 | Rim Group-Demountable; -1-Piece | 4 |
| 14***85 | Mounting Group-Rim | 1 |
117-7837 Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 11***38 | Mounting Group-Rim | 1 |
| 11***40 | Rim Group-Demountable; -3-Piece | 4 |
154-5508 Rim Ar
| 14***71 | Mounting Group-Rim | 1 |
| 14***84 | Stop Group-Axle Oscillation | 1 |
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
118-8596 Rim Ar
| 11***95 | Mounting Group-Rim; -Axle Oscillation Limitation | 1 |
| 11***96 | Rim Ar; -3-Piece | 1 |
| 11***41 | Rim Group-Demountable; -3-Piece | 4 |
146-6686 Rim Ar
| 11***41 | Rim Group-Demountable; -3-Piece | 4 |
| 14***86 | Rim Ar; -3-Piece | 1 |
| 14***71 | Mounting Group-Rim | 1 |
117-7839 Rim Gp-Demountable
| 11***39 | Rim Group-Demountable; -1-Piece | 1 |
| 2D***07 | Stud | 1 |
| 2D***08 | Grommmet | 1 |
2q-5979 Rim Gp-Demountable
| 18***43 | Rim Group-Demountable; -3-Piece | 1 |
| 2Q***79 | Rim Group-Demountable | 1 |
| 4K***79 | Seal-O-Ring | 1 |
129-1884 Rim Gp-Demountable
| 12***84 | Rim Group-Demountable; -3-Piece, Hose | 1 |
| 4K***81 | Ring-Lock; (Lock) | 1 |
| 8R***23 | Rim As | 1 |
119-5841 Rim Gp-Demountable
| 11***41 | Rim Group-Demountable; -3-Piece | 1 |
| 12***84 | Rim Group-Demountable; -3-Piece, Hose | 1 |
| 2D***28 | Core-Valve | 1 |
117-7840 Rim Gp-Demountable
| 11***40 | Rim Group-Demountable; -3-Piece | 1 |
| 18***42 | Rim Group-Demountable | 1 |
| 4K***79 | Seal-O-Ring | 1 |
176-1705 Rim Gp-Demountable
| 17***98 | Flange As | 1 |
| 17***99 | Rim As | 1 |
| 17***18 | Driver | 1 |
186-4943 Rim Gp-Demountable
| 17***06 | Rim Group-Demountable; -3-Piece | 1 |
| 18***43 | Rim Group-Demountable; -3-Piece | 1 |
186-4942 Rim Gp-Demountable
| 12***36 | Rim Group-Demountable; -3-Piece | 1 |
| 17***05 | Rim Group-Demountable; -3-Piece | 1 |
| 18***42 | Rim Group-Demountable | 1 |
176-1706 Rim Gp-Demountable
| 17***89 | Flange As | 1 |
| 17***18 | Driver | 1 |
| 17***06 | Rim Group-Demountable; -3-Piece | 1 |
128-5436 Rim Gp-Demountable
| 10***31 | Rim As | 1 |
| 12***36 | Rim Group-Demountable; -3-Piece | 1 |
| 4K***81 | Ring-Lock; (Lock) | 1 |
2q-5980 Rim Gp-Demountable
| 2Q***80 | Rim Group-Demountable; -3-Piece | 1 |
| 4K***81 | Ring-Lock; (Lock) | 1 |
| 8Q***33 | Rim As | 1 |
9t-2031 Rotating Gp-Pump -Steering, Pilot
| 00***83 | Ring-Snap | 1 |
| 9T***31 | Rotating Group-Pump; -Steering, Pilot | 1 |
| 9T***57 | Pin | 3 |
116-8532 Shaft Gp-Drive
| 11***32 | Shaft Group-Drive | 1 |
| 11***34 | Universal Joint Group | 1 |
| 11***36 | Slip Joint Group | 1 |
116-8537 Shaft Gp-Drive
| 11***37 | Shaft Group-Drive | 1 |
| 11***38 | Universal Joint Group | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
116-8536 Slip Joint Gp
| 11***36 | Slip Joint Group | 1 |
| 11***40 | Kit-Spider & Bearing | 2 |
| 1K***53 | Fitting (Pressure Relief) | 1 |
147-5484 Stop Gp-Axle Oscillation
| 14***84 | Stop Group-Axle Oscillation | 1 |
| 4E***57 | Block; (Oscillation Limiter) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 4 |
117-7849 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 11***49 | Tire & Rim Ar | 1 |
| 6C***46 | Tire; (17.5-R25) | 4 |
128-5444 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 12***44 | Tire & Rim Ar | 1 |
| 14***83 | Tire; (17.5-25) | 4 |
117-7862 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 11***62 | Tire & Rim Ar | 1 |
| 6C***66 | Tire; (17.5 R25*L-2) | 4 |
128-5439 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 12***39 | Tire & Rim Ar | 1 |
| 12***51 | Tire; (17.5-25) | 4 |
117-7860 Tire & Rim Ar
| 10***35 | Tire; (17.5-R25) | 4 |
| 11***37 | Rim Ar; -3-Piece | 1 |
| 11***60 | Tire & Rim Ar | 1 |
128-5443 Tire & Rim Ar
| 11***96 | Rim Ar; -3-Piece | 1 |
| 12***43 | Tire & Rim Ar | 1 |
| 13***97 | Tire-Tubeless; (20.5-25) | 4 |
128-5449 Tire & Rim Ar
| 11***96 | Rim Ar; -3-Piece | 1 |
| 12***65 | Tire; (20.5x25)(20.5 X 25-12 Ply) | 4 |
| 12***49 | Tire & Rim Ar | 1 |
117-7861 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 11***61 | Tire & Rim Ar | 1 |
| 6C***46 | Tire; (17.5-R25) | 4 |
128-5438 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 12***38 | Tire & Rim Ar | 1 |
| 12***50 | Tire-Tubeless; (17.5-25) | 4 |
128-5448 Tire & Rim Ar
| 11***96 | Rim Ar; -3-Piece | 1 |
| 12***62 | Tire; (20.5-25) | 4 |
| 12***48 | Tire & Rim Ar | 1 |
9z-8562 Tire & Rim Ar
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 18***65 | Tire; (20.5-R25) | 4 |
| 9Z***62 | Tire & Rim Ar | 1 |
128-5442 Tire & Rim Ar
| 11***96 | Rim Ar; -3-Piece | 1 |
| 12***64 | Tire-Tubeless; (20.5-25) | 4 |
| 12***42 | Tire & Rim Ar | 1 |
118-8593 Tire & Rim Ar
| 11***93 | Tire & Rim Ar | 1 |
| 11***96 | Rim Ar; -3-Piece | 1 |
| 6C***47 | Tire; (20.5 R25*L-3) | 4 |
154-5514 Tire & Rim Ar -Center Mount Rim
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 15***14 | Tire & Rim Ar; -Center Mount Rim | 1 |
| 6C***47 | Tire; (20.5 R25*L-3) | 4 |
154-5516 Tire & Rim Ar
| 12***67 | Tire; (20.5-25) | 4 |
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 15***16 | Tire & Rim Ar | 1 |
130-8426 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 13***26 | Tire & Rim Ar | 1 |
| 14***84 | Tire; (17.5-25) | 4 |
154-5521 Tire & Rim Ar
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 15***21 | Tire & Rim Ar | 1 |
| 6C***67 | Tire; (20.5-R25) | 4 |
117-7851 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 11***51 | Tire & Rim Ar | 1 |
| 6C***66 | Tire; (17.5 R25*L-2) | 4 |
190-8990 Tire & Rim Ar
| 14***83 | Rim Ar; -3-Piece | 1 |
| 19***90 | Tire & Rim Ar | 1 |
| 19***92 | Tire; (550/65-R25) | 4 |
130-8427 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 13***27 | Tire & Rim Ar | 1 |
| 14***87 | Tire; (17.5-25) | 4 |
128-5445 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 12***45 | Tire & Rim Ar | 1 |
| 14***86 | Tire; (17.5-25) | 4 |
128-5441 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 12***41 | Tire & Rim Ar | 1 |
| 12***51 | Tire; (17.5-25) | 4 |
128-5446 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 12***46 | Tire & Rim Ar | 1 |
| 14***83 | Tire; (17.5-25) | 4 |
190-8991 Tire & Rim Ar
| 14***83 | Rim Ar; -3-Piece | 1 |
| 19***91 | Tire & Rim Ar | 1 |
| 19***98 | Tire; (550/65-R25) | 4 |
118-8592 Tire & Rim Ar
| 10***37 | Tire; (20.5 R25*L-2) | 4 |
| 11***92 | Tire & Rim Ar | 1 |
| 11***96 | Rim Ar; -3-Piece | 1 |
117-7848 Tire & Rim Ar
| 10***35 | Tire; (17.5-R25) | 4 |
| 11***36 | Rim Ar; -1-Piece | 1 |
| 11***48 | Tire & Rim Ar | 1 |
149-8058 Tire & Rim Ar
| 14***83 | Rim Ar; -3-Piece | 1 |
| 14***58 | Tire & Rim Ar | 1 |
| 20***09 | Tire; (550/65-R25) | 4 |
128-5447 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 12***47 | Tire & Rim Ar | 1 |
| 14***86 | Tire; (17.5-25) | 4 |
144-8690 Tire & Rim Ar
| 14***90 | Tire & Rim Ar | 1 |
| 14***86 | Rim Ar; -3-Piece | 1 |
| 20***09 | Tire; (550/65-R25) | 4 |
190-8989 Tire & Rim Ar
| 14***83 | Rim Ar; -3-Piece | 1 |
| 19***89 | Tire & Rim Ar | 1 |
| 19***95 | Tire; (550/65-R25) | 4 |
130-8428 Tire & Rim Ar
| 11***96 | Rim Ar; -3-Piece | 1 |
| 12***63 | Tire; (20.5-25) | 4 |
| 13***28 | Tire & Rim Ar | 1 |
130-8424 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 13***24 | Tire & Rim Ar | 1 |
| 14***84 | Tire; (17.5-25) | 4 |
128-5440 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 12***40 | Tire & Rim Ar | 1 |
| 12***50 | Tire-Tubeless; (17.5-25) | 4 |
118-8594 Tire & Rim Ar
| 11***94 | Tire & Rim Ar | 1 |
| 11***96 | Rim Ar; -3-Piece | 1 |
| 6C***67 | Tire; (20.5-R25) | 4 |
154-5515 Tire & Rim Ar
| 12***64 | Tire-Tubeless; (20.5-25) | 4 |
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 15***15 | Tire & Rim Ar | 1 |
190-8987 Tire & Rim Ar
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 19***85 | Tire; (20.5-R25) | 4 |
| 19***87 | Tire & Rim Ar | 1 |
130-8425 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 13***25 | Tire & Rim Ar | 1 |
| 14***87 | Tire; (17.5-25) | 4 |
130-8429 Tire & Rim Ar
| 11***96 | Rim Ar; -3-Piece | 1 |
| 12***66 | Tire; (20.5-25) | 4 |
| 13***29 | Tire & Rim Ar | 1 |
1t-2009 Torque Converter Gp
| 1S***11 | Ring-Retaining | 1 |
| 1T***92 | Plate-Clamp | 2 |
| 1T***05 | Ring-Snap | 1 |
201-3318 Transmission Ar
| 11***75 | Clutch Group; -1st, 3rd | 1 |
| 11***80 | Gear Group-Output Transfer | 1 |
| 11***18 | Clutch Group; -Reverse, Second | 1 |
116-4860 Transmission Ar-Power Shift
| 11***60 | Transmission Ar-Power Shift | 1 |
| 11***62 | Case & Parts Group-Planetary | 1 |
| 11***63 | Gear Group-Input Transfer | 1 |
116-8538 Universal Joint Gp
| 11***38 | Universal Joint Group | 1 |
| 11***40 | Kit-Spider & Bearing | 1 |
116-8534 Universal Joint Gp
| 11***34 | Universal Joint Group | 1 |
| 11***39 | Kit-Spider & Bearing | 2 |
| 8V***15 | Ring; Ring-Retaining | 4 |
8e-6703 Valve Gp-Differential -Transmission
| 15***99 | Body-Valve | 1 |
| 2P***55 | Spring | 1 |
| 7M***85 | Seal,Adapter,Motor Part Of Kit P/N 5r***29 | 1 |
8e-5523 Valve Gp-Dump -Transmission
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
9w-7189 Valve Gp-Flow Control -Planetary Case
| 2L***26 | Ring-Retaining | 1 |
| 4M***45 | Spring (.0625" Dia.) | 1 |
| 6I***95 | Screen | 1 |
142-2882 Valve Gp-Flow Control
| 14***82 | Valve Group-Flow Control | 1 |
| 2L***26 | Ring-Retaining | 1 |
| 4M***45 | Spring (.0625" Dia.) | 1 |
6i-9806 Valve Gp-Relief -Torque Converter Outlet
| 2L***26 | Ring-Retaining | 1 |
| 2S***82 | Spring | 1 |
| 6I***04 | Spool | 1 |
8e-7580 Valve Gp-Selector & Press Cont
| 12***98 | Spring | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 4 |
| 3E***69 | Valve Group-Solenoid; (Transmission Control) | 6 |
3e-6269 Valve Gp-Solenoid
| 0L***13 | Nut-Special; (1/2unf) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 3E***67 | Cartridge Assem. | 1 |
120-6123 Valve Gp-Transmission Control
| 12***23 | Valve Group-Transmission Control | 1 |
| 12***41 | Plate-Identification | 1 |
| 14***67 | Poppet | 1 |
Service Equipment And Supplies
156-5229 Box Gp-Tool
| 11***56 | Angle | 1 |
| 11***33 | Washer; (11x50x6-mm Thk) | 2 |
| 15***28 | Cover As | 1 |
138-7096 Box Gp-Tool
| 11***56 | Angle | 1 |
| 12***68 | Lock As | 1 |
| 13***96 | Box Group-Tool | 1 |
136-4643 Film Gp
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 0 |
| 13***43 | Film Group | 1 |
| 13***72 | Film-Identification; (Cat) | 2 |
154-2698 Plate & Film Gp -Norwegian
| 10***17 | Plate-Warning; (No Clearance) | 2 |
| 10***55 | Tag-Warning; (Steering Frame Lock) | 1 |
| 13***48 | Film-Warning; (Radiator Pressure) | 1 |
127-2857 Plate & Film Gp
| 12***39 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 12***57 | Plate & Film Group | 1 |
| 12***74 | Plate-Rops/Fops | 1 |
115-5852 Plate & Film Gp -Engine Information
| 11***52 | Plate & Film Group; -Engine Information | 1 |
127-2858 Plate & Film Gp
| 12***40 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 12***58 | Plate & Film Group | 1 |
| 12***75 | Plate-Rops/Fops | 1 |
113-3680 Plate & Film Gp
| 11***80 | Plate & Film Group | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 12***41 | Film; (Identification) (On Primary Fuel Filter) | 1 |
Steering System
118-0899 Cylinder & Mtg Gp-Steering
| 11***99 | Cylinder & Mtg Group-Steering | 1 |
| 12***73 | Cylinder Group-Hydraulic; -Side Dump Bucket | 1 |
| 12***74 | Cylinder Group-Hydraulic; -Steering, Lh | 1 |
125-0373 Cylinder Gp-Hydraulic -Steering, Rh
| 12***73 | Cylinder Group-Hydraulic; -Side Dump Bucket | 1 |
| 12***75 | Cylinder As; (Rh) | 1 |
| 16***86 | Seal As-Buffer | 1 |
125-0374 Cylinder Gp-Hydraulic
| 12***74 | Cylinder Group-Hydraulic; -Steering, Lh | 1 |
| 12***76 | Cylinder As; (Lh) | 1 |
| 16***86 | Seal As-Buffer | 1 |
118-1101 Lines Gp-Steering
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***11 | Tee-O-Ring Port | 1 |
118-1102 Lines Gp-Steering
| 11***02 | Lines Group-Steering | 1 |
| 11***74 | Pump Group-Metering; -Hmu | 1 |
| 13***24 | Hose As | 1 |
123-8915 Pump & Motor Gp -Secondary Steering
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 12***14 | Pump; (Secondary Steering) | 1 |
| 12***15 | Pump & Motor Group; -Engine Prelubrication | 1 |
122-6356 Pump & Mtg Gp-Secondary Steer
| 12***56 | Pump & Mtg Group-Secondary Steer | 1 |
| 12***15 | Pump & Motor Group; -Engine Prelubrication | 1 |
| 13***68 | Plate As | 1 |
119-8474 Pump Gp-Metering -Hmu
| 10***76 | Kit-Spring | 1 |
| 10***04 | Seal | 1 |
| 10***88 | Gerotor As | 1 |
159-4548 Pump Gp-Metering -Hmu
| 09***66 | Bolt; (M8x1.25x75-mm) | 7 |
| 11***06 | Plug | 2 |
| 11***08 | Spring | 2 |
122-6357 Steering Ar
| 11***02 | Lines Group-Steering | 1 |
| 12***57 | Steering Ar | 1 |
| 13***10 | Battery & Wiring Group | 1 |
118-1100 Steering Ar
| 11***87 | Wiring Group-Secondary Steering | 1 |
| 11***00 | Steering Ar | 1 |
| 11***01 | Lines Group-Steering | 1 |
204-7147 Steering Column Gp
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 20***47 | Steering Column Group; -Tilt | 1 |
| 21***54 | Spring As-Gas; (Steering Column Tilt) | 1 |
319-1626 Steering Column Gp -Tilt
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 21***55 | Kit-Tilt Lever; (Steering Column) | 1 |
| 31***56 | Column As | 1 |
Work Tools
116-9713 Adapter Gp-Tip
| 11***13 | Adapter Group-Tip | 1 |
| 1U***57 | Adapter-Strap | 6 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 4 |
9v-1795 Arm Gp-Material Handling
| 1K***70 | Nut (National Coarse) | 1 |
| 5G***73 | Pin | 2 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 2 |
231-1497 Bucket Ar-General Purpose
| 11***99 | Bucket As-General Purpose | 1 |
| 23***97 | Bucket Ar-General Purpose | 1 |
| 8E***66 | Edge Group-Cutting | 1 |
231-1498 Bucket Ar-General Purpose
| 22***30 | Bucket As-General Purpose | 1 |
| 23***98 | Bucket Ar-General Purpose | 1 |
| 8E***66 | Edge Group-Cutting | 1 |
231-1508 Bucket Ar-General Purpose
| 22***59 | Bucket Group-General Purpose; -Quick Coupler | 1 |
| 23***08 | Bucket Ar-General Purpose | 1 |
| 8E***66 | Edge Group-Cutting | 1 |
223-9730 Bucket As-General Purpose
| 11***02 | Hinge As; (Outer Lh) | 1 |
| 11***03 | Hinge As; (Inner Lh) | 1 |
| 11***04 | Hinge As; (Inner Rh) | 1 |
117-1785 Bucket As-General Purpose
| 11***81 | Edge-Cutting | 1 |
| 11***83 | Plate-Wear | 2 |
| 11***85 | Bucket As-General Purpose | 1 |
119-1800 Bucket As-General Purpose
| 11***00 | Bucket As-General Purpose | 1 |
| 11***02 | Hinge As; (Outer Lh) | 1 |
| 11***03 | Hinge As; (Inner Lh) | 1 |
223-9734 Bucket As-General Purpose -Quick Coupler
| 22***34 | Bucket As-General Purpose; -Quick Coupler | 1 |
| 4E***59 | Edge-Cutting; (243-cm) | 1 |
119-1799 Bucket As-General Purpose
| 11***99 | Bucket As-General Purpose | 1 |
| 11***02 | Hinge As; (Outer Lh) | 1 |
| 11***03 | Hinge As; (Inner Lh) | 1 |
230-7486 Bucket Gp-General Purpose
| 1U***52 | Tip (Long) | 10 |
| 23***86 | Bucket Group-General Purpose | 1 |
224-0759 Bucket Gp-General Purpose -Quick Coupler
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 22***34 | Bucket As-General Purpose; -Quick Coupler | 3 |
120-0162 Bucket Gp-Light Material
| 12***62 | Bucket Group-Light Material | 1 |
| 12***63 | Hinge As; (Lift, Outer, Lh) | 1 |
| 12***64 | Hinge As; (Lift, Inner, Lh) | 1 |
6w-8832 Carriage As-Fork -Quick Coupler
| 16***89 | Tack-Fastener | 4 |
| 25***09 | Plate-Instruction | 1 |
| 6W***32 | Carriage As-Fork; -Quick Coupler | 1 |
8e-4566 Edge Gp-Cutting
| 1J***07 | Bolt 6.99cm (2.75 In.) Long | 10 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 10 |
| 4T***91 | End Bit; (End) | 2 |
135-6732 Edge Gp-Cutting
| 13***28 | Edge-Cutting; (Rh) | 1 |
| 13***29 | Edge-Cutting; (Lh) | 1 |
| 13***32 | Edge Group-Cutting | 1 |
110-4779 Edge Gp-Segment
| 11***79 | Edge Group-Segment | 1 |
| 1J***07 | Bolt 6.99cm (2.75 In.) Long | 14 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 14 |
8e-4568 Edge Gp-Segment
| 1J***07 | Bolt 6.99cm (2.75 In.) Long | 14 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 14 |
| 8E***68 | Edge Group-Segment | 1 |
6w-8935 Fork Gp-Pallet
| 09***37 | Service Group-Fork Positioner | 2 |
| 09***45 | Washer; (16.6x24x1.2-mm Thk) | 1 |
| 6W***35 | Fork Group | 1 |
6w-8900 Fork Gp-Pallet
| 09***37 | Service Group-Fork Positioner | 1 |
| 09***45 | Washer; (16.6x24x1.2-mm Thk) | 1 |
| 6W***00 | Fork Group | 1 |
6w-8933 Fork Gp-Pallet
| 09***37 | Service Group-Fork Positioner | 1 |
| 09***45 | Washer; (16.6x24x1.2-mm Thk) | 1 |
| 6W***33 | Fork Group | 1 |
195-6938 Fork Gp-Pallet -Lh
| 19***38 | Fork Group-Pallet; -Lh | 1 |
| 19***61 | Insert | 1 |
| 22***24 | Positioner Group-Work Tool; (Fork) | 1 |
195-6937 Fork Gp-Pallet
| 19***37 | Fork Group-Pallet | 1 |
| 19***61 | Insert | 1 |
| 22***24 | Positioner Group-Work Tool; (Fork) | 1 |
2q-1578 Fork Gp-Pallet
| 12***77 | Stop | 2 |
| 13***20 | Shaft | 1 |
| 13***39 | Clamp As | 4 |
195-6935 Fork Gp-Pallet -Rh
| 19***35 | Fork Group-Pallet; -Rh | 1 |
| 19***61 | Insert | 1 |
| 22***24 | Positioner Group-Work Tool; (Fork) | 1 |
326-1575 Hook Gp-Coupler
| 32***75 | Hook Group-Coupler | 1 |
9w-8142 Tip Gp-Long
| 9J***69 | Tip Group-Long; -J-250 | 8 |
| 9W***42 | Tip Group-Long | 1 |
9j-3169 Tip Gp-Long
| 13***63 | Pin-G.E.T. | 1 |
| 14***33 | Retainer As; (G.E.T.) | 1 |
| 1U***52 | Tip (Long) | 1 |
107-3296 Tooth Gp-Uni
| 10***96 | Tooth Group-Uni | 1 |
| 1U***57 | Tooth-Uni | 6 |
| 4F***42 | Bolt 7.62 cm(3 In.) Long | 2 |
928G serial number reference
The PIN plate on a 928G is riveted to the left side of the front frame, near the operator's station and the articulation joint; the serial is also stamped into the frame casting near the plate and can be hidden under paint or grime. On machines built before 2001 the plate shows an 8-character serial: a 3-letter prefix plus up to 5 digits (example 6XR00512). On 2001-and-later machines the plate carries the full 17-character PIN, with the same 3-letter prefix and sequence number embedded inside it. The prefix identifies the serial-number block/build era, not a specific calendar year by itself; the digits after it are just the production sequence within that block.
| Prefix | Identifies | Notes |
|---|---|---|
| 6XR | 928G wheel loader, first-generation build, open-ended block (6XR00001-UP) | Powered by the Cat 3116 turbocharged diesel (about 93 kW / 125 hp flywheel power). Dates to the 928G launch generation, mid/late 1990s. Runs parallel to 7SR as a separate serial block for the same generation. |
| 7SR | 928G wheel loader, first-generation build, capped block (7SR00001 through roughly 7SR02267) | Powered by the Cat 3116 turbocharged diesel, same generation as 6XR. The closed-end range points to a smaller production run or a second assembly source/region sharing the 6XR-era design, not a different model. |
| WLG | 928G wheel loader, later build, open-ended block (WLG00001-UP) | Powered by the Cat 3056E direct-injection turbocharged engine with air-to-air aftercooling. Represents the switch from the 3116 to the electronically controlled 3056E on the 928G line, dating from around the early 2000s. |
| DJD | 928G wheel loader (book shared with the IT28G integrated toolcarrier), open-ended block (DJD00001-UP) | Powered by the Cat 3056E DIT ATAAC engine. Dates to production in the low-to-mid 2000s. The parts/service book for this prefix covers both the 928G loader and its IT28G toolcarrier sibling built on the same chassis. |
| GMB | 928G wheel loader (OEM Solutions Group chart, same book family as DJD covering the 928G loader and IT28G toolcarrier), open-ended block (GMB00001-UP) | Powered by the Cat 3056E DIT ATAAC engine, same engine family as WLG/DJD. This prefix is documented in an OEM Solutions Group commonality chart rather than a standard retail parts book. Only thin sourcing ties an exact build date to this block - confirm the model year with your dealer before relying on it. |
Frequently asked questions
What engine does the Caterpillar 928G use?
The 928G was built with two different engines across its production run. Early machines used the mechanically governed Cat 3116T direct-injection turbocharged diesel, reported at roughly 93 to 107 kW (125 to 143 hp) at the flywheel depending on source. Later machines switched to the electronically controlled Cat 3056E DIT ATAAC diesel, rated near 98 kW (131 hp) net and built to meet Tier 2 emissions rules.
What is the operating weight of the Caterpillar 928G?
Operating weight runs about 11.8 to 12.3 tonnes (26,000 to 27,100 lb), varying by bucket size, counterweight, and other factory configuration choices. Check the specific serial number and configuration for an exact figure.
What replaced the Caterpillar 928G?
The 928G succeeded the 928F and was itself replaced by the Cat 928H, also offered with Z-bar linkage as the 928HZ, as Caterpillar moved its small-wheel-loader line to newer engine and emissions technology.
What 928G owners discuss
What powertrain complaints come up most often for the 928G?
Gear slip or loss of forward/reverse under load, and shift lockout where the transmission stops responding to the control handle. Losing gears once the transmission warms up usually traces to worn shift-valve or pump seals letting oil bypass back to the sump as it thins with heat, not a bad pump on its own. A machine stuck below its normal top gear points to a shift solenoid or a hydraulic pressure sensor in the transmission control circuit rather than the gearset itself. Swapping a suspect solenoid with a known-good one is a quick way to isolate a stuck valve from a wiring fault before pulling anything apart.
Why does the hydraulic system cavitate or the bucket drift down on its own?
A whining or cavitating pump noise on lift or curl usually means air is getting into the suction side (low fluid, a restricted suction strainer) or the pump internals are worn. On this loader's vane-type implement pump, a broken locating dowel lets the pump cartridge rotate inside its housing, which produces the same cavitation symptom even with good fluid and a clean strainer, so the pump itself needs a look, not just the tank. Bucket or lift-arm drift points to a leaking control-valve spool or a relief valve bypassing internally; checking cylinder drift rate and cycle time separates a bad valve from worn cylinder seals before you start swapping parts.
What's the real difference between the two engines fitted to the 928G?
Earlier production ran the mechanically injected Cat 3116T DIT, rated in a range of roughly 93-107 kW (125-143 hp) net depending on which rating standard is quoted. Later production moved to the electronically controlled Cat 3056E DIT with air-to-air aftercooling, meeting Tier 2 emissions, rated around 98 kW (131 hp) net with a noticeably higher torque rise for digging in the pile. On the 3116T, rough running and white or grey smoke on these loaders is most often injector wear or leaking O-rings at the injector sleeve, plus valve lash drifting out of adjustment; fuel racks need to be synchronized any time injectors are replaced or the engine keeps running unevenly. The 3056E is steadier day to day but shares the wet-liner block common to Cat's mid-range diesels of that era, so coolant supplemental additive has to stay within spec or cylinder liner cavitation/pitting starts eating into the block over time.
What electrical or sensor faults show up repeatedly on this loader?
All warning lights and the buzzer coming on together with the transmission locked out of gear is a recurring complaint. It's usually a loose or corroded cab power feed or relay connection, or a blown fuse feeding the transmission control module, rather than the module itself failing. A second pattern is bucket and lift functions going dead mid-shift and coming back after a shutdown and restart, which points to the electrohydraulic pilot control losing its signal; cycling the master disconnect switch off for a short period before restarting resets it for some owners, but a repeat occurrence means the pilot valve wiring and connectors need to be checked properly. One documented case traced a total loss of implement control to a pilot control valve reassembled with its pressure and tank ports reversed after a repair, worth confirming any time that valve has been serviced.
What wear points act like undercarriage wear on a machine like this?
There's no track undercarriage on an articulated wheel loader, but the lift-arm pins and bushings, bucket pivot pins, and the articulation/steering pins take that role. Owners and techs agree lack of grease is the single biggest cause of pin failure: a dry pin galls to its bushing, and once that friction weld starts, it wallows out the bore, which is a far more expensive repair than the grease it needed. Staying on the greasing interval and watching for dirt buildup around lift and tilt cylinder rod seals (an early sign of a leak) catches most of this before it gets costly. Because the steering and brake circuits share hydraulics on this loader, any leak, chafed hose, or soft response found during these checks should have your dealer verify the steering and brake circuit before the machine goes back to work.
How reliable is the 928G in everyday use?
Long-term owners describe it as a loader that runs for years with minimal drama; one account of several years of ownership listed a single transmission electrical solenoid as the only failure over that time. It's commonly cross-shopped against similarly sized loaders from other brands in the same weight and bucket class. Most complaints that do surface trace back to maintenance items -- pin lubrication, coolant additive on the electronic engine, injector wear on the mechanical engine -- rather than a systemic design problem, which fits a mid-size platform that's been in the field a long time.
What should I check before buying a used 928G?
Confirm hours and which engine generation is fitted -- mechanical 3116T or electronic 3056E -- since that affects emissions compliance and how easily service parts and diagnostic support are sourced going forward. Run the powershift through every gear, forward and reverse, and let it get to full operating temperature to see if it holds gears once warm, since that's a known failure pattern. Cycle lift, tilt, and steering through full travel watching for cavitation noise, drift, or leaks, and check tire tread wear pattern for uneven scrubbing that can point to steering or alignment wear. Look at the instrument cluster for stored warning or shift-lockout history, and ask for service records showing coolant additive testing if it's the electronic engine, since neglected coolant chemistry shows up later as liner damage that isn't visible on a walk-around. Have your dealer run a full hydraulic and electrical inspection, with particular attention to the steering and brake circuit, before finalizing the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 928G part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.