Caterpillarwheel-type loaderwheel loader
Caterpillar 924G
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 924G is a small wheel loader in Cat's 900 series, built roughly between 2000 and 2007-2008 across several plant and serial-prefix revisions. It runs the Caterpillar 3056E DIT ATAAC, a turbocharged, air-to-air aftercooled diesel rated net at roughly 96-102 kW (129-137 hp) depending on the production period and rating standard cited, meeting Tier 2 off-highway emissions. Operating weight falls in a roughly 10,900-11,600 kg (24,000-25,600 lb) band, with a commonly cited reference figure near 11,340 kg (24,990 lb); the spread comes from linkage and coupler choice rather than a separate model. The 924G replaced the 924F and was itself replaced by the 924H. Cat offered it with standard or High Lift VersaLink loader linkage and with either a pin-on front end or a Cat Quick Coupler, letting the same base machine run as a straight loader or a true integrated tool carrier.
The 924G was the first loader in the 924 line built around a one-piece VersaLink boom, replacing older multi-piece linkage with a design that blends parallel-lift geometry and Z-bar breakout force while opening up the operator's view to the bucket edge. Within its own production run Cat also revised the electronic monitoring system and the 3056E's power rating as emissions rules and markets shifted, which is why published net power figures vary by serial prefix and reference source. In the used and parts market the 924G still holds value because it predates the aftertreatment complexity of later H- and K-series small wheel loaders: the 3056E, powershift transmission, and axle assemblies are straightforward to diagnose, source, and rebuild without emissions electronics in the way. These loaders see hard use in yards, scrapyards, and light quarry work, so parts demand centers on linkage pins and bushings, coupler wear components, and axle/final-drive parts rather than engine control electronics.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 924G specifications
Engine
| Engine model | Caterpillar 3056E DIT ATAAC — six-cylinder diesel, direct injection turbocharged, air-to-air aftercooled. |
| Displacement / bore & stroke | 6.0 L (366 in³) displacement; bore 100 mm (3.94 in), stroke 127 mm (5.0 in). |
| Rated net power | 96 kW (129 hp) at 2300 rpm per SAE J1349; 97 kW (130 hp) per ISO 9249 and EEC 80/1269. |
| Maximum net power | 102 kW (137 hp) at 1900 rpm per SAE J1349; 103 kW (138 hp) per ISO 9249 and EEC 80/1269. With the cooling fan at maximum speed, rated net power drops to 86 kW (115 hp) and maximum net power to 96 kW (129 hp) at the flywheel. |
| Torque rise | 48% torque rise for added lugging power under load. |
| Emissions tier | Tier 2 off-highway emissions compliant. No power derate required to 3000 m (9,843 ft) altitude; automatic engine derate protects the engine, hydraulic, and transmission systems above that altitude or under abnormal operating conditions. |
| Production-period variance | Earlier production-year listings for this model cite a lower rating, roughly 90 kW (121 hp) net and 98 kW (132 hp) gross; power figures vary by production year and spec-sheet revision within the 924G run. |
Weights
| Operating weight (reference configuration) | 11,340 kg (24,990 lb) with counterweight, standard lubricants, full fuel tank, A/C cab, Contour seat, limited-slip axles, heavy-duty cooler, 1.8 m³ (2.3 yd³) general-purpose bucket, 80 kg (176 lb) operator, and 20.5 R25 radial tires. |
| Operating weight, Standard VersaLink linkage | 11,213–11,861 kg (24,721–26,150 lb), depending on hook-on vs. pin-on bucket and cutting-edge configuration. |
| Operating weight, High Lift VersaLink linkage | 11,300–11,947 kg (24,913–26,339 lb), depending on bucket type and configuration. |
| Operating weight with pallet forks | 11,042–11,102 kg (24,344–24,476 lb) on Standard VersaLink; 11,128–11,188 kg (24,533–24,665 lb) on High Lift VersaLink, depending on fork tine length. |
| Operating weight with material handling arm | 9,993 kg (22,031 lb) on Standard VersaLink; 10,079 kg (22,220 lb) on High Lift VersaLink. |
| Shipping weight | Not separately published; operating weight with full fluids, full fuel tank, and operator aboard is the closest factory figure. Tire choice alone shifts operating weight roughly 80–650 kg (170–1440 lb) versus the reference 20.5 R25 radial tire. |
| Ground pressure | Not published for this machine; ground pressure figures are not part of the standard factory spec sheet for this tired wheel loader class. |
Dimensions
| Overall length | 7168 mm (23 ft 6 in) Standard VersaLink; 7659 mm (25 ft 2 in) High Lift VersaLink with the reference bucket. Varies 7168–7531 mm (23'6"–24'9") Standard and 7659–8022 mm (25'2"–26'4") High Lift across bucket options. |
| Overall width over tires | 2356 mm (7 ft 9 in) with 17.5-25 tires; 2466 mm (8 ft 1 in) with 20.5-25 tires. |
| Width at tread center | 1880 mm (6 ft 2 in). |
| Overall height to top of ROPS/FOPS | 3227 mm (10 ft 8 in) Standard VersaLink; 3226 mm (10 ft 8 in) High Lift VersaLink. |
| Overall height, bucket at full raise | 5178 mm (16 ft 11 in) Standard VersaLink; 5684 mm (18 ft 8 in) High Lift VersaLink, reference bucket. |
| Wheelbase | 2800 mm (9 ft 2 in). |
| Ground clearance | 436 mm (1 ft 5 in) Standard VersaLink; 435 mm (1 ft 6 in) High Lift VersaLink. |
| Minimum turning radius, over tire | 5070 mm (16 ft 8 in) with 17.5-25 tires; 5135 mm (16 ft 10 in) with 20.5-25 tires. |
| Minimum turning radius, over bucket | 5840 mm (19 ft 2 in), High Lift VersaLink with 20.5-25 tires and reference bucket. |
| Steering angle | 40° each direction; center-point articulated frame. |
| Dump clearance at maximum lift, 45° dump | 2828 mm (9 ft 4 in) Standard VersaLink; 3335 mm (10 ft 11 in) High Lift VersaLink, reference bucket. |
| Hinge pin height at maximum lift | 3881 mm (12 ft 8 in) Standard VersaLink; 4387 mm (14 ft 5 in) High Lift VersaLink. |
| Digging depth | 64 mm (2.5 in) Standard VersaLink; 75 mm (3 in) High Lift VersaLink, reference bucket. |
Performance
| Travel speed, standard transmission, forward | Gear 1: 6.7 km/h (4.2 mph); Gear 2: 12.2 km/h (7.6 mph); Gear 3: 21.8 km/h (13.5 mph); Gear 4: 38.5 km/h (23.9 mph). |
| Travel speed, standard transmission, reverse | Gear 1: 6.7 km/h (4.2 mph); Gear 2: 12.2 km/h (7.6 mph); Gear 3: 21.8 km/h (13.5 mph). |
| Travel speed, optional low-speed transmission, forward | Gear 1: 3.7 km/h (2.3 mph); Gear 2: 7.5 km/h (4.7 mph); Gear 3: 19.6 km/h (12.2 mph); Gear 4: 39 km/h (24.2 mph). |
| Travel speed, optional low-speed transmission, reverse | Gear 1: 4.1 km/h (2.5 mph); Gear 2: 8.1 km/h (5 mph); Gear 3: 21.2 km/h (13.2 mph). |
| Breakout force | Varies by bucket type and linkage: roughly 7222–10,545 kg (15,921–23,247 lb) on Standard VersaLink and 7241–10,565 kg (15,963–23,291 lb) on High Lift VersaLink across the reference bucket set. |
| Static tipping load, straight | 8286 kg (18,268 lb) Standard VersaLink with reference general-purpose bucket; 6717 kg (14,809 lb) High Lift VersaLink. Ranges 7682–8299 kg (16,936–18,296 lb) Standard and 6139–6717 kg (13,534–14,809 lb) High Lift across bucket options. |
| Static tipping load, full 40° turn | 7232 kg (15,944 lb) Standard VersaLink; 5880 kg (12,963 lb) High Lift VersaLink, reference bucket. |
| Hydraulic cycle time | Raise 5.1 sec, dump 1.4 sec, lower (empty, float down) 2.4 sec — total cycle 8.9 sec. |
| Gradeability | Not published for this wheel loader; class performance is rated by breakout force and tipping load rather than a grade percentage. |
Service capacities (summary)
| Fuel tank | 225 L (59.4 gal). |
| Cooling system | 40 L (10.6 gal). |
| Engine oil (crankcase) | 16 L (4.2 gal). |
| Transmission | 23 L (6.1 gal). |
| Differentials and final drives | 21 L (5.5 gal) front; 21 L (5.5 gal) rear. |
| Hydraulic system | 125 L (33 gal) total including tank; 70 L (18.5 gal) in the hydraulic tank alone. |
| Coolant/antifreeze | Cat Extended Life Coolant/Antifreeze, standard protection to -36°C (-33°F), optional protection to -50°C (-58°F); rated for extended service up to 6,000 hours between changes. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
924G fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) — Cat 3056E DIT ATAAC, 6-cyl turbocharged diesel with air-to-air aftercooling | 16 L (4.2 US gal); a few spec sheets round up to 20 L (5.3 US gal) — varies by source/series, confirm against the dipstick mark and engine serial plate | Cat DEO (Diesel Engine Oil). SAE 15W-40 for most operating temperatures. SAE 10W-30 is the alternate multigrade for the same broad ambient range. For sustained cold below about -18°C (0°F), use Cat DEO Cold Weather SAE 0W-40. Match grade to the OMM's ambient-temperature viscosity chart, not just outside air temp at startup. |
| Cooling system | 40 L (10.6 US gal); rounds to about 41 L (10.9 US gal) depending on source | Cat ELC (Extended Life Coolant), 50/50 premix (ethylene glycol / water). Organic acid corrosion-inhibitor technology — no supplemental coolant additive needed and no SCA top-off interval to track. Do not mix ELC with conventional green coolant. |
| Fuel tank | 225 L (59.4 US gal) | Diesel fuel meeting Cat's engine fuel specification (No. 2-D or equivalent). Use a winterized or treated blend below about 0°C (32°F) to prevent wax/gelling in the fuel system. |
| Transmission (powershift powertrain) | 23 L (6.1 US gal) | Cat TDTO (Transmission/Drive Train Oil), TO-4 spec. SAE 10W or SAE 30 depending on ambient temperature per the OMM viscosity table. Cat Arctic TDTO or TDTO-TMS for cold-climate service. |
| Front axle — differential and final drive (integrated housing) | 21 L (5.5 US gal) | Cat TDTO, TO-4 spec — same fluid family as the transmission. The front axle housing combines differential, planetary final drives, and wet disc brakes in one shared compartment, so the oil must meet the wet-brake friction requirement, not a plain gear or hydraulic oil. |
| Rear axle — differential and final drive (integrated housing) | 21 L (5.5 US gal) | Cat TDTO, TO-4 spec, matching the front axle fill. Same wet-brake friction requirement applies. |
| Hydraulic system, total including tank | 125 L (33 US gal) on the standard bucket/coupler configuration; the pin-on coupler configuration is listed around 150 L (39.6-39.7 US gal) — varies by configuration/series | Cat HYDO (Hydraulic Oil) as the preferred fill. Cat TDTO or Cat DEO are approved alternates when ambient temperature calls for a different viscosity than the stocked HYDO grade. Select viscosity from the OMM's ambient-temperature chart, not by fluid family alone. |
| Hydraulic tank | 70 L (18.5 US gal) of the total hydraulic system capacity above | Same fluid as the hydraulic system — Cat HYDO, or an approved Cat TDTO/DEO alternate. |
| Grease (all pin, bushing, and bearing points) | Not a sump fill — applied at grease points per the lubrication interval schedule | Cat multipurpose grease, NLGI 2. Use a moly-fortified grease (about 3% molybdenum disulfide) at high-load pin and bushing points such as loader linkage, bucket, and lift-arm pins. Use standard NLGI 2 grease without moly at wheel bearings and other lighter-duty points. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 924G maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 924G beyond the schedule
Predictive Maintenance & Fluid Analysis
The 3056E DIT ATAAC responds well to scheduled S·O·S sampling on engine oil, transmission fluid, axle/final-drive oil, and hydraulic tank oil at each interval draw. Trending catches turbocharger and aftercooler wear, powershift clutch pack degradation, and axle bearing fatigue before they become downtime. On a machine this age, oil analysis is the cheapest early warning for injector wear, coolant contamination, and seal leakage into the final drives. Log results by serial prefix, since production spanned nearly a decade of running revisions.
Corrective & Common Repairs
Most 924G corrective work centers on the VersaLink loader linkage: pin and bushing wear at the Z-bar tilt lever and boom foot from stretched grease intervals, plus wedge-lock or horizontal-pin wear on quick-coupler-equipped units. The articulated center hitch pin and steering cylinder pins are the next common wear points on machines run hard on uneven yard surfaces. On the powertrain, watch the 3056E turbocharger and aftercooler core for boost leaks, and expect powershift transmission solenoid and clutch-pack wear as machines pass mid-life hours.
Overhaul & Rebuild Points
Full rebuild candidates on a high-hour 924G are the powershift transmission clutch packs and torque converter, the differential and planetary final drives in both axles, and the loader linkage pin-and-bushing set end to end. Engine overhaul on the 3056E typically addresses injectors, the turbocharger cartridge, and the aftercooler core alongside a top-end rebuild once oil analysis or blow-by trends demand it. Articulation and steering cylinder bushings, plus the center hitch pin bore, are common wear items to inspect at the same major service window.
Seasonal & Environment Servicing
Cold starts on the 3056E call for correct-viscosity oil, a working block heater, and a coolant freeze-point check before winter; battery and cold-start aids deserve attention on this Tier 2 engine. In hot, dusty quarry or demolition work, service the air filter and aftercooler core on a shortened interval and keep the hydraulic tank breather clean to protect the pump and cylinders. Wash accumulated debris from the articulation hitch and axle housings regularly so grease fittings stay accessible and seals don't pack with grit.
924G common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 152-7217 | Filter Element As-Air | Air intake service | Check fitment → |
| 152-7219 | Filter Element As-Air | Air intake service | Check fitment → |
| 111-8738 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 126-1818 | Filter-Oil | Hydraulic service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
924G fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 1684-09 (MID 036, Engine ECM) | Engine ECM lost CAN data link communication with the fuel injection pump | Damaged or corroded connector or harness between the ECM and injection pump, or loss of pump power supply | Engine shuts down and will not restart while active. Check injection pump connectors and harness for damage or corrosion, then verify pump power supply before further diagnosis |
| CID 1684-08 (MID 036, Engine ECM) | Fuel injection pump position signal missing or incorrect | Faulty pump position/timing signal circuit or a loose connector at the injection pump | Engine derates roughly 20 percent with low power and hard starting. Check pump signal wiring and connectors, then confirm pump timing calibration |
| CID 1684-12 (MID 036, Engine ECM) | Fuel injection pump internal malfunction | Internal pump failure, air in the fuel system, or out-of-range resistance or voltage at pump connectors | Expect a 20 percent power derate and reduced governed speed. Bleed the fuel system and check connector resistance before condemning the pump |
| CID 0174-02 (MID 036, Engine ECM) | Fuel temperature sensor signal erratic or intermittent | Loose or corroded sensor connector, or an intermittent sensor element; often logs alongside a fuel injection pump communication fault when pump power is interrupted | Check the fuel temperature sensor connector and wiring for intermittent contact before replacing the sensor |
| CID 0247-09 (MID 036, Engine ECM) | Loss of communication on the data link between the engine ECM and other machine control modules | Open or shorted data link wiring, a loose module connector, or a failed module on the data link | Machine can lose engine speed control while active. Check data link wiring and connector pins at each module before replacing a control module |
| Event code E100 (MID 036, Engine ECM) | Low engine oil pressure warning | Low oil level, worn oil pump, restricted oil pickup, or a failing oil pressure sensor | Check oil level and verify pressure with a mechanical gauge right away; do not rely on the sensor reading alone before continuing to operate |
| Event code E190 (MID 036, Engine ECM) | Engine overspeed warning | Sudden load release or downhill overrun in gear; less often a failing engine speed sensor reading falsely high | Reduce throttle and check for driveline overrun conditions; verify the engine speed sensor if the warning repeats without an obvious overspeed event |
| CID 0426-03/04 (MID 081, Machine ECM) | Brake oil pressure sensor signal reading outside normal range | Open or shorted sensor signal circuit, a failed sensor, or a power or ground circuit fault | Throttle lock and brake neutralizer functions are disabled while active. Check sensor wiring and connector before replacing the sensor |
| CID 0444-05 (MID 081, Machine ECM) | Starter motor relay circuit open | Open relay energize or return circuit, or a failed starter relay | Engine will not crank while active. Check the relay and its wiring circuit for continuity before replacing the relay |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
924G attachments & work tools
General purpose buckets
Standard-line general purpose bucket runs about 1.7-2.1 m3 (2.2-2.7 yd3) rated capacity for this class, offered with a bolt-on cutting edge, bolt-on teeth and segments, or bolt-on teeth. Base machine reference configuration ships with a 1.8 m3 (2.3 yd3) GP bucket and bolt-on cutting edge.
Waste/ag and light-material buckets
A higher-capacity waste/ag bucket runs about 2.8 m3 (3.6 yd3), and a low-density light-material (woodchip-type) bucket runs up to roughly 5.0 m3 (6.5 yd3) for bulky, low-bulk-density loads. Bucket width on the standard loader frame is about 2550 mm (8 ft 4 in); exact capacity varies by edge type and hook-on vs pin-on mount.
Pallet forks
Pallet fork carriages are offered with 1200 mm (3 ft 11 in) or 1350 mm (4 ft 5 in) tine lengths on both Standard and High Lift linkage. Rated operating load varies with the load rating standard applied (SAE J1197 vs EN 474-3 rough-terrain or firm-ground), roughly 2.3-2.7 t at the lighter SAE-based rating up to about 4.2-4.4 t under EN 474-3 firm/level-ground rating.
Lumber and log forks
Millyard-style log/lumber forks are offered in hook-on (quick coupler) and pin-on mounting, each with its own load rating sized for log-handling duty per EN 474-3 (75% and 85% of tipping load, rough terrain vs firm/level ground). Operating loads run roughly 2.3-4.4 t depending on mount type and rating basis; varies by configuration.
Material handling arm
An optional material handling arm is offered with retracted, mid, and extended reach positions on both Standard and High Lift linkage, aimed at tire handling, specialty clamp work and reach-limited lift jobs. Rated operating load drops with extension, from roughly 1.6-1.8 t retracted down to about 1.1-1.2 t fully extended.
Dozer blade and snow plow
A frame-mounted dozer blade and snow plow are offered as special-application work tools for this class, with blade width around 2550 mm (8 ft 4 in), matching the standard bucket width. These mount as pin-on or quick-coupler attachments rather than dedicated grading tools.
Hydraulically powered specialty tools
Rotary brooms, hydraulic brooms, augers, an asphalt cutter and loader rakes are offered as specialty work tools that need auxiliary hydraulic power beyond the lift/tilt circuit. High-dump and side-dump buckets and top-clamp-style buckets or forks also draw on this auxiliary circuit for their dump or clamp function.
Coupler and mounting system
Work tools mount either pin-on (dedicated wheel loader configuration) or through the integral Caterpillar hydraulic quick coupler, engaged and disengaged from a cab switch without leaving the seat. A standard-width and a wide quick coupler are both offered, and the loader linkage can be reconfigured between pin-on and quick coupler with a minimum of added parts.
Loader linkage arrangement
The single-piece VersaLink boom is offered in Standard and High Lift arrangements; High Lift adds reach, dump clearance and dig depth for high-target dumping or long-reach work, trading off some breakout force and tipping load versus Standard. Parallel-lift geometry keeps forked or clamped loads level through the lift range for palletized or stacked material handling.
Auxiliary hydraulics and control kit
Base machine carries a two-section control valve for lift and tilt; up to two more valve sections can be stacked on for optional third and fourth function hydraulics needed by rotary brooms, augers, high-dump/side-dump buckets, top-clamp buckets and grapple-style forks. An optional joystick with integrated third-function control adds a standard intermittent-flow work tool mode and a continuous-flow mode with adjustable flow rate for brooms or clamps.
Guarding and severe-application packages
Optional guarding covers crankcase, power train and a dedicated waste-guarding package for refuse/recycling duty, alongside heavy-duty brakes with an integrated axle oil cooler and a heavy-duty hydraulic oil cooler for severe service. A reversing cooling fan is also offered to clear debris from screens without stopping the machine.
Ride control and factory configuration options
An optional hydro-pneumatic ride control system (auto/on/off modes) smooths travel with a loaded work tool at speed and improves hard-bank digging performance. Other options affecting tool and lift performance include a bolt-on/removable counterweight (about 175 kg/385 lb), limited-slip or no-spin differentials, and a low-speed transmission for attachments that need high hydraulic flow at low ground speed.
All 924G assemblies by section
Every catalogued assembly group for the Caterpillar 924G. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
159-3259 Air Cleaner Gp
| 13***47 | Bracket As | 1 |
| 14***11 | Adapter-Filter | 1 |
| 14***12 | Indicator-Air Filter Change; (Engine) | 1 |
159-3260 Air Cleaner Gp
| 15***17 | Filter Element As-Air; (Primary) | 1 |
| 15***19 | Filter Element As-Air; (Secondary) | 1 |
| 15***60 | Air Cleaner Group | 1 |
193-3808 Conversion Ar-Air Cleaner
| 19***08 | Conversion Ar-Air Cleaner | 1 |
| 19***11 | Cap As-Air Cleaner | 1 |
| 28***96 | Cap As-Air Cleaner | 1 |
168-2416 Extension Gp-Exhaust
| 14***80 | Clamp Assem. | 1 |
| 16***16 | Extension Group-Exhaust | 1 |
| 16***27 | Pipe As | 1 |
159-3267 Lines Gp-Air
| 14***67 | Clamp; (Hose) | 1 |
| 15***67 | Lines Group-Air | 1 |
| 15***68 | Hose | 1 |
159-3262 Muffler Gp
| 12***28 | Spacer; (11x20x10-mm Thk) | 4 |
| 14***97 | Gasket | 1 |
| 14***69 | Bracket As | 1 |
145-9382 Muffler Gp
| 12***28 | Spacer; (11x20x10-mm Thk) | 4 |
| 14***97 | Gasket | 1 |
| 14***82 | Muffler Group | 1 |
130-3279 Precleaner Gp
| 13***79 | Precleaner Group; -Turbine | 1 |
| 17***14 | Clamp; (T'Bolt) | 1 |
121-7746 Precleaner Gp
| 12***46 | Precleaner Group | 1 |
| 13***43 | Clamp-Hose | 1 |
| 1M***50 | Bowl | 1 |
166-2881 Turbocharger Gp
| 16***81 | Turbocharger Group | 1 |
| 16***82 | Housing | 1 |
| 16***83 | Housing | 1 |
184-4615 Turbocharger Gp
| 03***48 | Fitting-Brass | 1 |
| 06***58 | Clamp-Hose | 2 |
| 10***53 | Stud | 6 |
Basic Engine
170-1688 Camshaft Gp
| 06***79 | Dowel | 1 |
| 06***99 | Bushing-Idler Gear | 2 |
| 06***00 | Plate-Retaining | 1 |
161-2843 Cover Gp-Accessory Drive
| 06***10 | Washer | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 13***68 | Plate | 1 |
168-2421 Cover Gp-Sound Suppression
| 16***21 | Cover Group-Sound Suppression | 1 |
| 17***38 | Insulation | 1 |
| 17***39 | Seal | 1 |
170-3772 Cover Gp-Valve Mechanism
| 10***04 | Gasket | 1 |
| 11***04 | Seal-O-Ring | 1 |
| 11***05 | Seal-O-Ring | 1 |
170-3706 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 2 |
209-5566 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 14 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 14 |
184-4612 Cylinder Block Gp
| 12***31 | Bolt | 2 |
| 14***39 | Seal | 1 |
| 16***23 | Cylinder Block Group | 1 |
161-9823 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 14 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 14 |
170-1650 Cylinder Head Gp
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 12***79 | Plug | 1 |
170-1648 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 4 |
| 15***73 | Gasket-Cylinder Head | 1 |
| 17***48 | Cylinder Head Group | 1 |
159-5254 Drain Gp-Engine Oil
| 13***55 | Hose; (8-cm) | 0 |
| 15***54 | Drain Group-Engine Oil | 1 |
| 15***55 | Adapter | 1 |
171-1090 Fastener Gp-Alternator
| 17***90 | Fastener Group-Alternator | 1 |
| 6I***54 | Bolt; (M8x1.25x30-mm) | 2 |
| 6I***39 | Bolt; (M8x1.25x70-mm) | 1 |
171-1423 Fastener Gp-Cylinder Head
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
| 17***23 | Fastener Group-Cylinder Head | 1 |
170-2464 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 11***43 | Flywheel As | 1 |
| 17***64 | Flywheel Group | 1 |
170-2463 Housing Gp-Flywheel
| 10***57 | Plate | 1 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 13***54 | Plug | 1 |
301-5175 Housing Gp-Flywheel
| 10***57 | Plate | 1 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 14***76 | Housing-Flywheel | 1 |
170-1687 Housing Gp-Front
| 14***43 | Gasket-Cover | 1 |
| 14***44 | Shield | 1 |
| 14***45 | Damper | 1 |
171-1408 Lifting Gp-Engine
| 12***00 | Spacer | 1 |
| 14***49 | Plate-Lifting | 1 |
| 14***90 | Plate | 1 |
171-1410 Mounting Gp-Engine
| 10***87 | Plug | 6 |
| 11***13 | Stud; (M16x45-Thd) | 3 |
| 17***10 | Mounting Group-Engine | 1 |
132-2464 Mounting Gp-Engine & Xmsn
| 13***64 | Mounting Group-Engine & Xmsn | 1 |
| 13***79 | Support | 2 |
| 13***91 | Bracket As | 1 |
170-3711 Mounting Gp-Fan Drive
| 17***11 | Mounting Group-Fan Drive | 1 |
| 6I***50 | Bolt; (M10x1.5x65-mm) | 4 |
170-3755 Pan Gp-Oil
| 10***51 | Bolt; (M8x1.25x65-mm) | 1 |
| 11***55 | Stud | 2 |
| 11***57 | Bracket | 1 |
170-3707 Piston & Rod Gp
| 12***32 | Bolt-Connecting Rod | 2 |
| 12***33 | Dowel | 2 |
| 13***48 | Bushing | 1 |
147-5532 Plug Gp-Cylinder Block
| 03***63 | Plug | 2 |
| 14***32 | Plug Group-Cylinder Block | 1 |
147-5524 Plug Gp-Cylinder Block
| 06***24 | Plug | 2 |
| 14***24 | Plug Group-Cylinder Block; -Oil Gallery | 1 |
163-0264 Plug Gp-Engine
| 16***64 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 2 |
184-5483 Pulley Gp-Crankshaft
| 10***41 | Bolt; (M12x1.75x25-mm) | 8 |
| 18***83 | Pulley Group-Crankshaft | 1 |
| 18***84 | Pulley | 1 |
146-8956 Rocker Arm Gp
| 00***06 | Ring-Retaining | 2 |
| 06***83 | Plug-Shaft End | 2 |
| 06***87 | Spring-Shaft | 4 |
216-8887 Suppression Ar-Sound
| 13***00 | Hood & Guard Group | 1 |
| 13***45 | Extension Group-Exhaust | 1 |
| 14***80 | Clamp Assem. | 1 |
174-6939 Suppression Ar-Sound
| 13***00 | Hood & Guard Group | 1 |
| 13***45 | Extension Group-Exhaust | 1 |
| 13***48 | Guard Group-Crankcase | 1 |
216-8914 Suppression Ar-Sound -Environmental
| 13***48 | Guard Group-Crankcase | 1 |
| 14***82 | Muffler Group | 1 |
| 16***12 | Guard Group-Power Train | 1 |
174-6936 Suppression Ar-Sound
| 13***75 | Lines Group-Hydraulic | 1 |
| 13***00 | Hood & Guard Group | 1 |
| 13***45 | Extension Group-Exhaust | 1 |
174-6937 Suppression Ar-Sound
| 13***75 | Lines Group-Hydraulic | 1 |
| 13***00 | Hood & Guard Group | 1 |
| 13***45 | Extension Group-Exhaust | 1 |
216-8889 Suppression Ar-Sound -Environmental
| 13***48 | Guard Group-Crankcase | 1 |
| 14***82 | Muffler Group | 1 |
| 16***12 | Guard Group-Power Train | 1 |
170-1681 Valve Mechanism Gp
| 06***95 | Rod | 12 |
| 12***93 | Ferrule | 1 |
| 13***53 | Tappet | 12 |
Braking System
140-9251 Accumulator Gp-Brake -Charged
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
9c-5973 Brake Gp-Parking
| 6W***12 | Plate Assem. | 1 |
| 6W***13 | Spring; (Shoe To Shoe) | 1 |
| 6W***14 | Spring; (Shoe Return) | 1 |
111-9041 Brake Gp-Parking
| 11***41 | Brake Group-Parking; (Bendix) | 1 |
| 11***50 | Shoe As-Lined | 2 |
| 1V***72 | Spring-Extension | 1 |
9c-8683 Brake Gp-Parking
| 11***41 | Brake Group-Parking; (Bendix) | 1 |
| 9C***73 | Brake Group-Parking; Parking Brake Group(Akebono) | 1 |
| 9C***83 | Brake Group-Parking | 1 |
168-7000 Control Gp-Parking Brake -Handle
| 16***08 | Bracket Assem. | 1 |
| 16***12 | Lever Assem. | 1 |
| 16***00 | Control Group-Parking Brake; -Handle | 1 |
132-2470 Control Gp-Parking Brake
| 13***70 | Control Group-Parking Brake | 1 |
| 13***93 | Bracket As | 1 |
| 14***93 | Cable As-Parking Brake Control | 1 |
140-9258 Control Gp-Service Brake
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 11***98 | Boot | 1 |
140-9250 Lines Gp-Service Brake
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 1 |
| 11***40 | Spacer; (13.1x15.9x36.5-mm Thk)(36.5mm Thk) | 4 |
| 13***92 | Plate As | 1 |
146-9823 Pump Gp-Gear -Brake, Hydraulic Fan
| 00***64 | Seal-O-Ring | 2 |
| 09***64 | Bolt-Socket Head; (M10x1.5x145-mm) | 1 |
| 09***95 | Pin, Dowel | 4 |
204-4994 Pump Gp-Gear -Brake, Hydraulic Fan
| 00***64 | Seal-O-Ring | 2 |
| 09***64 | Bolt-Socket Head; (M10x1.5x145-mm) | 1 |
| 09***95 | Pin, Dowel | 4 |
Cooling System
170-3778 Connection Gp-Water
| 14***15 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
| 14***88 | Seal; (Housing, Regulator)(Temperature Regulator Housing) | 1 |
| 16***36 | Ring; (Water Temperature Regulator) | 1 |
165-2430 Cooler Gp-Fltr Base & Eng Oil
| 11***22 | Bolt; (M8x16-mm) | 16 |
| 13***54 | Base-Oil Filter | 1 |
| 14***04 | Adapter | 1 |
177-3322 Fan Gp-Suction
| 17***21 | Spider As-Fan; (9-Blade) | 1 |
| 17***22 | Fan Group-Suction | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
173-8720 Guard Gp-Fan
| 11***45 | Latch As-Door | 1 |
| 12***46 | Plate | 1 |
| 13***19 | Handle As | 1 |
176-3220 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 10***71 | Bolt | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 3 |
140-9310 Radiator & Hyd Oil Cooler Gp
| 14***10 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 1V***85 | Valve-Shutoff; (Hydraulic Oil) | 1 |
| 7M***85 | Seal,Adapter,Motor Part Of Kit P/N 5r***29 | 1 |
140-9300 Radiator Gp
| 00***65 | Cap-Radiator; (7 Psi) | 1 |
| 00***01 | Ring-Retaining | 1 |
| 14***97 | Plate As | 1 |
Electrical And Starting System
3e-6328 Alarm Gp -Action
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
177-9953 Alternator Gp-Charging
| 17***53 | Alternator Group-Charging; (24-Volt, 80-Ampere) | 1 |
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
157-2392 Alternator Gp-Charging
| 11***06 | Bracket-Alternator | 1 |
| 13***16 | V-Belt Set; (Includes 2-Belts)(Includes 2 Belts) | 1 |
| 14***98 | Wire Assem. | 1 |
9w-3043 Alternator Gp-Charging
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 5 |
| 10***63 | Regulator As-Alternator; (24-Volt) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
143-2662 Alternator Gp-Charging
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***82 | Wire Assem. | 1 |
| 14***62 | Alternator Group-Charging | 1 |
178-0061 Alternator Gp-Charging
| 06***40 | V-Belt | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***16 | V-Belt Set; (Includes 2-Belts)(Includes 2 Belts) | 1 |
132-2673 Battery & Wiring Gp
| 10***76 | Hold-Down-Battery | 2 |
| 13***60 | Cable As | 1 |
| 13***61 | Cable As | 1 |
112-7167 Battery Gp -Heavy Duty
| 11***67 | Battery Group; -12-Volt, 900-Ampere | 1 |
| 9X***04 | Battery-Maintenance Free; (12 Volt)(900 Amp) | 2 |
3e-7843 Control Gp-Position -Work Tool
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***43 | Control Group-Bucket Positioner; (Bucket Positioner) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
3e-7844 Control Gp-Lift Kickout -Work Tool
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 3E***44 | Control Group-Lift Kickout; (Lift Kickout) | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
3e-5184 Control Gp-Secondary Steering
| 1S***93 | Strap; (Cable) (0.62in Dia) | 6 |
| 3E***84 | Control Group-Secondary Steering; -Electronic Monitoring System | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
115-1317 Converter Gp-Electrical
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***17 | Converter Group-Electrical | 1 |
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 1 |
207-5262 Electronics Gp-Machine -Security
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***55 | Control Group-Unprogrammed; -Machine Security System | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
190-2446 Electronics Gp-Machine -Security
| 19***46 | Electronics Group-Machine; -Security | 1 |
| 20***62 | Electronics Group-Machine | 1 |
| 23***37 | Software Group-Machine; (Security) | 1 |
159-4995 Heater Gp-Jacket Water
| 15***95 | Heater Group-Jacket Water | 1 |
| 15***96 | Cord As-Heater | 1 |
| 8M***54 | Packing,Preformed Cover Part Of Kit P/N 5r***27 | 1 |
194-7258 Heater Gp-Jacket Water
| 12***09 | Cord As-Heater Element; -240-Volt | 1 |
| 13***17 | Cap As-Dust | 1 |
| 16***99 | Element As-Jacket Water Heater; (240-Volt, 1250-Watt) | 1 |
107-1852 Heater Gp-Jacket Water
| 10***52 | Heater Group-Jacket Water | 1 |
| 15***08 | Cord As-Heater | 1 |
| 8M***54 | Packing,Preformed Cover Part Of Kit P/N 5r***27 | 1 |
184-5300 Installation Gp-Security
| 09***49 | Bolt; (M8x1.25x40-mm) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
227-0902 Installation Gp-Security
| 09***49 | Bolt; (M8x1.25x40-mm) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
107-6032 Lamp Gp-Dome
| 10***32 | Lamp Group-Dome | 1 |
| 25***86 | Lamp; (24-Volt, 10-Watt) | 1 |
234-4325 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***25 | Lamp Group-Flood; -Suspended Mount | 1 |
117-3468 Lamp Gp-Flood
| 11***68 | Lamp Group-Flood; -Suspended Mount | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
3e-7586 Lamp Gp-Head & Signal
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
3e-7587 Lamp Gp-Head & Signal -Lh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***49 | Lens As; (Headlight) | 1 |
105-4850 Lamp Gp-Head & Signal -Rh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
105-4849 Lamp Gp-Head & Signal -Lh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
4y-9449 Lamp Gp-Rear -Combination, Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***74 | Lens; (Lh Turn Signal) | 1 |
| 13***75 | Lens; (Lh Stop & Tail) | 1 |
4y-9450 Lamp Gp-Rear -Combination, Rh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***71 | Lens; (Rh Turn Signal) | 1 |
| 13***72 | Lens; (Rh Stop & Tail) | 1 |
145-6929 Lamp Gp-Stop & Tail
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***29 | Lamp Group-Stop & Tail | 1 |
108-1029 Lamp Gp-Warning Beacon -Amber
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 9R***42 | Plug As | 1 |
217-6741 Lighting Ar-Flood & Signal
| 11***48 | Lamp; (24-Volt, 3-Watt)(Clear)(Fuel Level Gauge) | 1 |
| 11***45 | Mirror Group-Rear View; -Exterior | 1 |
| 17***73 | Panel Group-Instrument | 1 |
171-6578 Lighting Ar-Flood & Signal
| 13***80 | Lighting Group-Flood & Signal | 1 |
| 17***73 | Panel Group-Instrument | 1 |
| 17***78 | Lighting Ar-Flood & Signal | 1 |
193-3807 Lighting Ar-Flood & Signal
| 10***32 | Speedometer Group | 1 |
| 11***45 | Mirror Group-Rear View; -Exterior | 1 |
| 17***73 | Panel Group-Instrument | 1 |
194-2470 Lighting Ar-Flood & Signal
| 13***80 | Lighting Group-Flood & Signal | 1 |
| 13***32 | Box Group-Battery | 1 |
| 17***73 | Panel Group-Instrument | 1 |
171-6579 Lighting Ar-Roading
| 10***32 | Speedometer Group | 1 |
| 13***81 | Lighting Group-Roading | 1 |
| 13***32 | Box Group-Battery | 1 |
116-0924 Lighting Ar-Roading -Dipped, Rh
| 11***24 | Lighting Ar-Roading; -Dipped, Rh | 1 |
| 3E***86 | Lamp Group-Head; -Roading, Dipped, Rh | 2 |
116-0926 Lighting Ar-Roading -Dipped, Lh
| 11***26 | Lighting Ar-Roading; -Dipped, Lh | 1 |
| 3E***87 | Lamp Group-Head; -Lh-Roading, Dipped, Lh | 2 |
116-0925 Lighting Ar-Roading -Dipped, Rh
| 10***49 | Lamp Group-Head & Signal; -Lh | 1 |
| 10***50 | Lamp Group-Head & Signal; -Rh | 1 |
| 11***25 | Lighting Ar-Roading; -Dipped, Rh | 1 |
115-1558 Lighting Gp-Auxiliary -Cab Front
| 11***58 | Lighting Group-Auxiliary; -2-Lamp, Cab, Front | 1 |
| 11***59 | Plate | 2 |
| 11***68 | Lamp Group-Flood; -Suspended Mount | 2 |
120-6668 Lighting Gp-Flood -Canopy
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***41 | Lamp Group-Flood; (24-Volt) | 4 |
| 11***57 | Harness Assembly; (Floodlight) | 1 |
117-9622 Lighting Gp-Flood -Cab
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***41 | Lamp Group-Flood; (24-Volt) | 4 |
| 10***81 | Cable As-Coaxial | 1 |
217-6742 Lighting Gp-Flood & Signal
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
132-2680 Lighting Gp-Flood & Signal
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
| 10***41 | Lamp Group-Flood; (24-Volt) | 2 |
193-3805 Lighting Gp-Flood & Signal
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
132-2681 Lighting Gp-Roading
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
107-6142 Lighting Gp-Warning Beacon
| 10***33 | Switch As-Warning Beacon | 1 |
| 10***42 | Lighting Group-Warning Beacon | 1 |
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
122-6465 Lighting Gp-Warning Beacon
| 10***33 | Switch As-Warning Beacon | 1 |
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
117-3915 Motor Gp-Electric -Secondary Steering
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
| 7X***08 | Washer-Hard; (10.2x16x2-mm Thk) | 2 |
171-1414 Starting Aid Gp
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 10***83 | Nut; (3/16), . Drum | 1 |
132-2677 Starting Aid Gp
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***61 | Wire Assembly; (Rear) | 1 |
| 10***36 | Switch As-Rocker; (Thermal Starting Aid) | 1 |
141-6390 Starting Aid Gp
| 03***59 | Plug-Start | 1 |
| 14***90 | Starting Aid Group; -Heater | 1 |
143-0541 Starting Motor Gp-Electric
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***15 | Housing-Starting Motor | 1 |
1g-9963 Starting Motor Gp-Electric
| 14***41 | Starting Motor Group-Electric | 1 |
| 1G***63 | Starting Motor Group-Electric | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
132-2674 Switch Gp-Disconnect
| 13***62 | Cable As | 1 |
| 13***63 | Cable As | 1 |
| 13***74 | Switch Group-Disconnect | 1 |
3e-0154 Switch Gp-Magnetic -Secondary Steering Relay
| 14***84 | Switch As-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 14***85 | Switch As-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
167-0138 Switch Gp-Magnetic -Main Relay
| 15***61 | Wedge-Plug Lock; (2-Pin) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
275-7741 Switch Gp-Wiper -Intermittent
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 27***41 | Switch Group-Wiper; -Intermittent-Front, Rear | 1 |
107-6133 Switch Gp-Wiper -Intermittent
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***33 | Switch Group-Wiper; -Intermittent | 1 |
| 11***86 | Wiper Switch Assembly; (24-Volt)(Front/Intermittent) | 1 |
132-2675 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***49 | Alarm Group | 1 |
| 13***75 | Warning Group-Backup | 1 |
171-6172 Wiring Gp-Cab
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
132-2671 Wiring Gp-Chassis
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***08 | Sender Assem.; (Hydraulic Oil Temperature) | 1 |
195-7598 Wiring Gp-Fan -Reversible
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
194-7890 Wiring Gp-Fan
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
132-2672 Wiring Gp-Front
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
132-2686 Wiring Gp-Front
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
171-6171 Wiring Gp-Open Rops
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 3 |
132-2670 Wiring Gp-Power Train
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
209-4726 Wiring Gp-Pressure Limiter
| 06***94 | Angle-Bracket | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
132-2684 Wiring Gp-Rear
| 13***84 | Wiring Group-Rear | 1 |
| 17***13 | Harness As-Rear | 1 |
| 3D***79 | Grommet-Install In Hole In Platform | 2 |
132-2678 Wiring Gp-Ride Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
173-3086 Wiring Gp-Ride Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 10***30 | Switch As; (Auto Ride Control) | 1 |
132-2676 Wiring Gp-Secondary Steering
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***61 | Housing | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
Engine Arrangement
203-0763 Engine Ar-Primary
| 13***13 | Engine Ar-Primary | 1 |
| 14***90 | Starting Aid Group; -Heater | 1 |
| 14***07 | Filter & Lines Group-Fuel | 1 |
138-7713 Engine Ar-Primary
| 13***13 | Engine Ar-Primary | 1 |
| 14***90 | Starting Aid Group; -Heater | 1 |
| 14***07 | Filter & Lines Group-Fuel | 1 |
166-0693 Installation Ar-Engine
| 13***64 | Mounting Group-Engine & Xmsn | 1 |
| 14***11 | Valve Group-Fluid Sampling | 1 |
| 14***00 | Radiator Group | 1 |
Frame And Body
193-3806 Box Gp-Battery
| 17***35 | Box As | 2 |
| 19***06 | Box Group-Battery | 1 |
| 19***40 | Cover As | 2 |
132-2732 Box Gp-Battery
| 13***32 | Box Group-Battery | 1 |
| 14***80 | Plate As | 2 |
| 17***35 | Box As | 2 |
163-4325 Conversion Ar-Roading -Italy
| 10***03 | Restrainer | 1 |
| 10***69 | Plate As | 1 |
| 12***65 | Lighting Group-Warning Beacon | 1 |
163-4296 Conversion Ar-Roading
| 10***86 | Kit-First Aid | 1 |
| 10***44 | Plate-Warning; (Slow Moving Vehicle) | 1 |
| 10***61 | Option Ar-Tool Roll | 1 |
163-4298 Conversion Ar-Roading -Germany
| 10***86 | Kit-First Aid | 1 |
| 10***44 | Plate-Warning; (Slow Moving Vehicle) | 1 |
| 10***61 | Option Ar-Tool Roll | 1 |
163-4324 Conversion Ar-Roading
| 10***03 | Restrainer | 1 |
| 10***69 | Plate As | 1 |
| 12***65 | Lighting Group-Warning Beacon | 1 |
163-4333 Conversion Ar-Roading
| 10***86 | Film-Identification; (40-Km/H)(40 Kph) | 3 |
| 13***25 | Plate As | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
146-7976 Counterweight Gp
| 14***76 | Counterweight Group | 1 |
| 19***93 | Counterweight As | 1 |
| 19***58 | Counterweight As | 1 |
146-0059 Counterweight Gp
| 14***58 | Counterweight; (Rh) | 1 |
| 14***59 | Counterweight Group | 1 |
| 14***19 | Counterweight; (Lh) | 1 |
140-9314 Counterweight Gp
| 14***14 | Counterweight Group | 1 |
| 14***72 | Counterweight As | 1 |
| 14***73 | Counterweight As | 1 |
176-7576 Cover Gp-Access
| 16***89 | Plate | 1 |
| 17***76 | Cover Group-Access | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 2 |
176-7635 Fender Gp
| 14***85 | Pivot As | 2 |
| 14***93 | Fender Group-Roading | 1 |
| 14***94 | Fender Group-Roading | 1 |
154-4914 Fender Gp-Front
| 15***14 | Fender Group-Front | 1 |
| 15***17 | Bracket As; (Rh) | 1 |
| 15***18 | Bracket As; (Lh) | 1 |
140-9295 Fender Gp-Front -Roading
| 14***95 | Fender Group-Front; -Roading | 1 |
| 14***96 | Bracket As | 2 |
| 20***13 | Bolt; (M6x1.0x40mm) | 8 |
146-0093 Fender Gp-Roading
| 00***01 | Ring-Retaining | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 3 |
146-0094 Fender Gp-Roading
| 00***01 | Ring-Retaining | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 3 |
154-4915 Fender Gp-Roading
| 14***85 | Pivot As | 2 |
| 14***93 | Fender Group-Roading | 1 |
| 14***94 | Fender Group-Roading | 1 |
146-0086 Fender Gp-Roading
| 14***96 | Bracket As | 2 |
| 14***85 | Pivot As | 2 |
| 14***86 | Fender Group-Roading | 1 |
132-2601 Frame As-Rear
| 12***54 | Block | 2 |
| 13***01 | Frame As-Rear | 1 |
| 13***02 | Frame As-Rear | 1 |
132-2500 Frame Gp-Loader
| 13***00 | Frame Group-Loader | 1 |
| 13***01 | Frame As-Front | 1 |
| 7T***99 | Link | 19 |
148-7700 Frame Gp-Loader
| 09***36 | Boss; (M10x1.5-Thd) | 1 |
| 14***00 | Frame Group-Loader | 1 |
| 14***02 | Frame As-Front | 1 |
132-2600 Frame Gp-Rear
| 10***96 | Pin-Keeper | 1 |
| 11***85 | Pad As-Resilient | 2 |
| 13***58 | Pin As | 1 |
132-2748 Guard Gp-Crankcase
| 13***48 | Guard Group-Crankcase | 1 |
| 15***31 | Plate As | 1 |
| 8T***39 | Capscrew; (Hex Hd) (M12 X 1.75 X 30l Gr 10.9) | 2 |
160-6325 Guard Gp-Drive Shaft -Z-Bar Linkage
| 16***16 | Plate As | 1 |
| 16***22 | Plate As | 1 |
| 16***25 | Guard Group-Drive Shaft; -Z-Bar Linkage | 1 |
160-6320 Guard Gp-Drive Shaft -Versalink
| 16***19 | Guard As | 1 |
| 16***20 | Guard Group-Drive Shaft; -Versalink | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
192-0735 Guard Gp-Lighting -Front, Rear
| 15***45 | Support As-Rh | 1 |
| 15***46 | Support As-Lh | 1 |
| 19***32 | Guard As; (Rh) | 1 |
193-8106 Guard Gp-Lighting
| 19***06 | Guard Group-Lighting | 1 |
| 19***07 | Guard As | 2 |
| 19***08 | Bracket As | 2 |
156-4557 Guard Gp-Lines -4-Valve
| 15***57 | Guard Group-Lines; -4-Valve | 1 |
| 5P***66 | Clip(Slot); (Slot) | 4 |
| 5P***67 | Clip (Tab); (Slot) | 4 |
163-4384 Guard Gp-Lines -Coupler
| 16***43 | Sleeve-Abrasion; (37.01-In Each) | 1 |
| 16***84 | Guard Group-Lines; -Coupler | 1 |
| 16***86 | Guard-Hose | 3 |
176-7584 Guard Gp-Lines -Tilt
| 17***84 | Guard Group-Lines; -Tilt | 1 |
| 18***19 | Guard-Hose | 2 |
| 7K***81 | Strap-Pressure & Return Hoses To | 8 |
156-4556 Guard Gp-Lines -3-Valve
| 15***56 | Guard Group-Lines; -3-Valve | 1 |
| 16***56 | Guard-Hose | 2 |
| 5P***68 | Clip (Slot-For Use On 52 mm Od Tube) | 4 |
156-4555 Guard Gp-Lines -3-Valve
| 15***55 | Guard Group-Lines; -3-Valve | 1 |
| 16***48 | Sleeve-Abrasion | 0 |
| 5P***68 | Clip (Slot-For Use On 52 mm Od Tube) | 2 |
176-7585 Guard Gp-Lines -Tilt
| 17***85 | Guard Group-Lines; -Tilt | 1 |
| 18***21 | Guard | 2 |
| 6V***45 | Grommet | 2 |
167-3912 Guard Gp-Power Train
205-2212 Guard Gp-Radiator
113-3790 Hitch Gp-Articulating
| 11***28 | Shim | 1 |
| 11***90 | Hitch Group-Articulating | 1 |
| 11***91 | Pin As | 1 |
132-2700 Hood & Guard Gp
| 12***86 | Lock As-Cylinder | 1 |
| 13***16 | Stud-Ball | 4 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
176-7763 Hood & Guard Gp
| 12***86 | Lock As-Cylinder | 1 |
| 13***16 | Stud-Ball | 5 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
191-0085 Insulation Gp-Weather
| 17***12 | Insulation | 1 |
| 17***13 | Insulation | 1 |
| 17***14 | Insulation | 1 |
140-9188 Ladder Gp
| 12***47 | Spacer; (10.5x20x12-mm Thk) | 24 |
| 13***14 | Step As; (Lh) | 1 |
| 13***15 | Step As; (Rh) | 1 |
146-3214 Lines Gp-Grease
| 14***14 | Lines Group-Grease | 1 |
| 3B***52 | Elbow; --Cross To Hose Assembly To Air Gauge | 5 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 7 |
7v-2885 Link Gp-Steering Frame Lock
| 5P***37 | Pin (Lock) | 2 |
| 5V***98 | Link | 1 |
| 5V***99 | Pin | 2 |
168-2414 Panel Gp-Sound Suppression
| 11***50 | Insulation | 1 |
| 11***61 | Insulation | 1 |
| 16***14 | Panel Group-Sound Suppression | 1 |
140-9177 Plate Gp-Firewall
| 14***77 | Plate Group-Firewall | 1 |
| 14***78 | Plate | 1 |
| 14***79 | Plate As | 1 |
168-2420 Suppression Ar-Sound
| 13***48 | Guard Group-Crankcase | 1 |
| 14***82 | Muffler Group | 1 |
| 16***12 | Guard Group-Power Train | 1 |
168-2430 Suppression Ar-Sound
| 13***48 | Guard Group-Crankcase | 1 |
| 14***82 | Muffler Group | 1 |
| 16***12 | Guard Group-Power Train | 1 |
168-2413 Suppression Gp-Sound
| 16***13 | Suppression Group-Sound | 1 |
| 16***24 | Insulation | 1 |
| 17***35 | Insulation | 1 |
168-2418 Suppression Gp-Sound
| 16***18 | Suppression Group-Sound | 1 |
| 17***97 | Insulation | 1 |
| 17***98 | Insulation | 2 |
168-2419 Suppression Gp-Sound
| 16***19 | Suppression Group-Sound | 1 |
| 17***07 | Insulation-Lh | 1 |
| 17***08 | Insulation-Lh | 1 |
Fuel System
141-7844 Base Gp-Fuel Filter
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
132-2484 Control Gp-Governor
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
| 13***47 | Spring | 1 |
| 13***84 | Control Group-Governor | 1 |
171-1383 Filter & Lines Gp-Fuel
| 03***47 | Ferrule | 1 |
| 03***14 | Nut; (7/16-In) | 1 |
| 06***98 | Nut; (3/8-24-Thd) | 2 |
146-7807 Filter & Lines Gp-Fuel
| 03***47 | Ferrule | 1 |
| 03***14 | Nut; (7/16-In) | 1 |
| 06***68 | Nut-Fuel Line; (1/2-In) | 6 |
141-5780 Guard Gp-Fuel Injection Pump
| 14***86 | Plate | 1 |
| 14***80 | Guard Group-Fuel Injection Pump | 1 |
| 14***62 | Film-Notice; (Fuel Pump) | 1 |
146-0126 Lines Gp-Fuel
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***49 | Plug | 2 |
| 08***18 | Sleeve-Tube; (5/16) | 2 |
171-1419 Lines Gp-Fuel Filter
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 17***19 | Lines Group-Fuel Filter | 1 |
192-9788 Pump Gp-Fuel Injection
| 13***11 | Cap; (Tamper Resistant) | 1 |
| 14***45 | Valve Group-Solenoid; (24-Volt)(Fuel Shutoff) | 1 |
| 15***68 | Seal-O-Ring | 1 |
192-9789 Pump Gp-Fuel Injection
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
170-2375 Pump Gp-Fuel Injection
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
162-9269 Separator Gp-Water
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
132-2721 Tank Gp-Fuel
| 13***21 | Tank Group-Fuel | 1 |
| 14***50 | Valve-Ball | 1 |
| 14***63 | Tank Group-Fuel | 1 |
146-0063 Tank Gp-Fuel
| 13***23 | Tube As | 1 |
| 14***63 | Tank Group-Fuel | 1 |
| 15***44 | Cap-Fuel | 1 |
Hydraulic System
146-7931 Accumulator & Mtg Gp-Ride Cont
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***30 | Film; (Warning) (Accumulator Pressure) (On Bracket Covering Brake Accumulator) | 1 |
| 12***16 | Switch As-Pressure; (Ride Control Disable) | 1 |
146-7945 Accumulator & Mtg Gp-Ride Cont
| 10***30 | Film; (Warning) (Accumulator Pressure) (On Bracket Covering Brake Accumulator) | 1 |
| 13***78 | Valve Group-Solenoid | 1 |
| 14***36 | Plate As | 1 |
215-6410 Accumulator & Mtg Gp-Ride Cont
| 06***35 | Valve-Gas | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***30 | Film; (Warning) (Accumulator Pressure) (On Bracket Covering Brake Accumulator) | 1 |
149-5532 Accumulator Gp-Hydraulic -Uncharged-Brake
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
215-6877 Accumulator Gp-Ride Control
| 06***35 | Valve-Gas | 1 |
| 10***30 | Film; (Warning) (Accumulator Pressure) (On Bracket Covering Brake Accumulator) | 1 |
| 13***24 | Hose As | 1 |
216-9523 Control Ar-Ride
| 13***78 | Wiring Group-Ride Control | 1 |
| 21***10 | Accumulator & Mtg Group-Ride Cont | 1 |
| 21***23 | Control Ar-Ride | 1 |
189-0939 Control Ar-Ride
| 14***30 | Control Ar-Ride | 1 |
| 18***39 | Control Ar-Ride | 1 |
189-0940 Control Ar-Ride
| 14***44 | Control Ar-Ride | 1 |
| 18***40 | Control Ar-Ride | 1 |
146-7944 Control Ar-Ride
| 14***44 | Control Ar-Ride | 1 |
| 14***45 | Accumulator & Mtg Group-Ride Cont | 1 |
| 17***86 | Wiring Group-Ride Control | 1 |
146-7930 Control Ar-Ride
| 13***78 | Wiring Group-Ride Control | 1 |
| 14***30 | Control Ar-Ride | 1 |
| 14***31 | Accumulator & Mtg Group-Ride Cont | 1 |
219-4490 Control Ar-Ride
| 17***86 | Wiring Group-Ride Control | 1 |
| 21***77 | Accumulator Group-Ride Control | 1 |
| 21***90 | Control Ar-Ride | 1 |
209-7763 Control Gp-Hydraulic Lockout
| 11***49 | Lock Assem. | 1 |
| 14***69 | Rod | 2 |
| 20***95 | Plate | 1 |
217-3478 Conversion Ar-Hydraulic
| 10***03 | Elbow | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
209-4724 Conversion Ar-Hydraulic -Kit-Low Idle
| 20***33 | Plate As | 1 |
| 20***37 | Guard As | 1 |
| 20***50 | Valve & Mtg Group-Control | 1 |
217-3476 Conversion Ar-Hydraulic
| 10***03 | Elbow | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
217-3477 Conversion Ar-Hydraulic
| 10***03 | Elbow | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
217-3474 Conversion Ar-Hydraulic
| 10***03 | Elbow | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
154-4922 Conversion Ar-Load Control -Field Installation
| 15***22 | Conversion Ar-Load Control; -Field Installation | 1 |
| 15***23 | Lines Group-Hydraulic; -Load Control | 1 |
194-9804 Conversion Gp-Control Valve
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 11***37 | Rod | 1 |
| 12***01 | Knob; (Auxiliary) | 1 |
194-9803 Conversion Gp-Control Valve
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 11***37 | Rod | 1 |
| 12***01 | Knob; (Auxiliary) | 1 |
195-3294 Conversion Gp-Hydraulic Fan
| 19***96 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 19***89 | Lines Group-Hydraulic Fan | 1 |
| 19***94 | Conversion Group-Hydraulic Fan | 1 |
195-3293 Conversion Gp-Hydraulic Fan
| 19***42 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 19***89 | Lines Group-Hydraulic Fan | 1 |
| 19***93 | Conversion Group-Hydraulic Fan | 1 |
192-7497 Conversion Gp-Hydraulic Fan -Kit
| 19***97 | Conversion Group-Hydraulic Fan; -Kit | 1 |
| 19***41 | Motor Group-Gear; -Reversing Hydraulic Fan | 1 |
| 19***90 | Wiring Group-Fan; -Reversing | 1 |
192-7498 Conversion Gp-Hydraulic Fan -Kit
| 19***95 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 19***98 | Conversion Group-Hydraulic Fan; -Kit | 1 |
| 19***89 | Lines Group-Hydraulic Fan | 1 |
185-8785 Conversion Gp-Pilot Control
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***37 | Switch As-Kickout; (Bucket, Fork Selector) | 1 |
185-8782 Conversion Gp-Pilot Control
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 11***37 | Rod | 1 |
| 12***01 | Knob; (Auxiliary) | 1 |
192-0720 Conversion Gp-Pilot Control
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 11***40 | Rod | 1 |
| 12***01 | Knob; (Auxiliary) | 1 |
185-8783 Conversion Gp-Pilot Control
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 11***40 | Rod | 1 |
| 12***01 | Knob; (Auxiliary) | 1 |
191-9912 Conversion Gp-Pilot Control
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 11***40 | Rod | 1 |
| 12***01 | Knob; (Auxiliary) | 1 |
185-8780 Conversion Gp-Pilot Control
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 11***37 | Rod | 1 |
| 12***01 | Knob; (Auxiliary) | 1 |
189-5835 Cooler Ar-Hydraulic Oil
| 14***51 | Cooler Group-Hydraulic Oil | 1 |
| 18***35 | Cooler Ar-Hydraulic Oil | 1 |
146-0151 Cooler Gp-Hydraulic Oil
| 14***51 | Cooler Group-Hydraulic Oil | 1 |
| 15***94 | Core As-Oil Cooler | 1 |
| 16***49 | Plate | 1 |
146-0141 Cooler Gp-Hydraulic Oil
| 14***41 | Cooler Group-Hydraulic Oil | 1 |
| 15***93 | Core As-Oil Cooler | 1 |
| 16***49 | Plate | 1 |
176-0720 Cylinder & Mtg Gp-Coupler -Wide
| 14***55 | Pin | 2 |
| 17***20 | Cylinder & Mtg Group-Coupler; -Wide | 1 |
| 17***14 | Cylinder Group-Coupler | 1 |
148-7827 Cylinder & Mtg Gp-Coupler
| 14***27 | Cylinder & Mtg Group-Coupler | 1 |
| 17***20 | Cylinder Group-Coupler | 1 |
| 17***93 | Rod | 2 |
179-0114 Cylinder Gp-Coupler
| 17***14 | Cylinder Group-Coupler | 1 |
| 18***04 | Valve Group-Check; (Coupler Cylinder) | 1 |
| 18***24 | Rod | 2 |
190-3085 Cylinder Gp-Coupler
| 17***93 | Rod | 2 |
| 18***72 | Kit-Seal; (Coupler Cylinder) | 1 |
| 19***85 | Cylinder Group-Coupler | 1 |
152-4187 Cylinder Gp-Lift
| 15***87 | Cylinder Group-Lift | 1 |
| 15***89 | Cylinder As | 1 |
| 15***91 | Piston | 1 |
141-7483 Cylinder Gp-Lift
| 11***08 | Bearing | 1 |
| 12***97 | Head | 1 |
| 14***83 | Cylinder Group-Lift | 1 |
152-5306 Cylinder Gp-Tilt
| 13***73 | Piston | 1 |
| 13***96 | Rod As | 1 |
| 15***06 | Cylinder Group-Tilt | 1 |
141-7484 Cylinder Gp-Tilt
| 14***84 | Cylinder Group-Tilt | 1 |
| 14***85 | Cylinder As | 1 |
| 14***87 | Rod As; (Tilt Cylinder) | 1 |
141-4359 Filter & Mtg Gp-Hydraulic
| 11***87 | Bracket | 1 |
| 14***59 | Filter & Mtg Group-Hydraulic | 1 |
| 15***91 | Filter Group-Oil | 1 |
158-3491 Filter Gp-Oil
| 12***18 | Filter-Oil; (Ultra High Efficiency)(Hydraulic) | 1 |
| 15***91 | Filter Group-Oil | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
191-2048 Hydraulic Ar
| 13***65 | Lines Group-Lift Cylinder | 1 |
| 13***85 | Lines Group-Tilt Cylinder | 1 |
| 13***76 | Pump & Mtg Group-Impl & Steering; -Implement,Pilot & Steering | 1 |
191-2049 Hydraulic Ar
| 13***76 | Pump & Mtg Group-Impl & Steering; -Implement,Pilot & Steering | 1 |
| 14***75 | Tank & Mtg Group-Hydraulic | 1 |
| 14***59 | Pump & Mtg Group-Brake & Hydraulic Fan | 1 |
132-2341 Hydraulic Ar
| 13***41 | Hydraulic Ar | 1 |
| 14***32 | Valve Group-Bank 2 | 1 |
| 14***05 | Control Group-Pilot Operated Hydraulic | 1 |
154-4950 Hydraulic Ar
| 14***32 | Valve Group-Bank 2 | 1 |
| 15***50 | Hydraulic Ar | 1 |
| 15***53 | Control Group-Pilot Operated Hydraulic | 1 |
154-4956 Hydraulic Ar-2 Valve
| 14***32 | Valve Group-Bank 2 | 1 |
| 14***05 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***58 | Control Group-Handle; -Transmission Downshift | 1 |
154-4948 Hydraulic Ar-2 Valve
| 14***42 | Valve Group-Bank 2 | 1 |
| 15***48 | Hydraulic Ar-2 Valve | 1 |
| 15***53 | Control Group-Pilot Operated Hydraulic | 1 |
132-2344 Hydraulic Ar-2 Valve
| 13***44 | Hydraulic Ar-2 Valve | 1 |
| 14***05 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***42 | Valve Group-Bank 2 | 1 |
154-4959 Hydraulic Ar-2 Valve
| 14***05 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***42 | Valve Group-Bank 2 | 1 |
| 14***58 | Control Group-Handle; -Transmission Downshift | 1 |
154-4960 Hydraulic Ar-3 Valve
| 14***06 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***43 | Valve Group-Bank 3 | 1 |
| 14***61 | Lines Group-Front | 1 |
154-4949 Hydraulic Ar-3 Valve
| 14***43 | Valve Group-Bank 3 | 1 |
| 14***61 | Lines Group-Front | 1 |
| 15***49 | Hydraulic Ar-3 Valve | 1 |
154-4957 Hydraulic Ar-3 Valve
| 14***33 | Valve Group-Bank 3 | 1 |
| 14***06 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***10 | Lines Group-Hydraulic | 1 |
132-2342 Hydraulic Ar-3 Valve
| 13***42 | Hydraulic Ar-3 Valve | 1 |
| 14***33 | Valve Group-Bank 3 | 1 |
| 14***06 | Control Group-Pilot Operated Hydraulic | 1 |
132-2345 Hydraulic Ar-3 Valve
| 13***45 | Hydraulic Ar-3 Valve | 1 |
| 14***06 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***43 | Valve Group-Bank 3 | 1 |
154-4951 Hydraulic Ar-3 Valve
| 14***33 | Valve Group-Bank 3 | 1 |
| 14***10 | Lines Group-Hydraulic | 1 |
| 15***51 | Hydraulic Ar-3 Valve | 1 |
194-3747 Hydraulic Ar-4 Valve
| 14***07 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***44 | Valve Group-Bank 4 | 1 |
| 14***61 | Lines Group-Front | 1 |
154-4958 Hydraulic Ar-4 Valve
| 14***34 | Valve Group-Bank 4 | 1 |
| 14***07 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***10 | Lines Group-Hydraulic | 1 |
154-4952 Hydraulic Ar-4 Valve
| 14***10 | Lines Group-Hydraulic | 1 |
| 14***20 | Lines Group-Front | 1 |
| 15***52 | Hydraulic Ar-4 Valve | 1 |
132-2343 Hydraulic Ar-4 Valve
| 13***43 | Hydraulic Ar-4 Valve | 1 |
| 14***34 | Valve Group-Bank 4 | 1 |
| 14***07 | Control Group-Pilot Operated Hydraulic | 1 |
132-2747 Kickout & Positioner Gp
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***37 | Switch As-Kickout; (Bucket, Fork Selector) | 1 |
148-7678 Kickout & Positioner Gp
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***94 | Clamp | 1 |
| 10***97 | Clamp | 2 |
203-9131 Lines Gp-Coupler -Kit
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***25 | Connector As. | 6 |
| 14***68 | Elbow Group | 2 |
154-4920 Lines Gp-Coupler
| 12***72 | Block | 2 |
| 14***67 | Plate As | 1 |
| 14***68 | Plate As | 1 |
146-7960 Lines Gp-Coupler
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
154-4924 Lines Gp-Coupler
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***25 | Connector As. | 6 |
| 14***51 | Elbow Group | 2 |
203-9132 Lines Gp-Coupler -Kit
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***25 | Connector As. | 6 |
163-4385 Lines Gp-Coupler
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***25 | Connector As. | 6 |
| 14***51 | Elbow Group | 2 |
146-7970 Lines Gp-Coupler
| 12***72 | Block | 2 |
| 14***67 | Plate As | 1 |
| 14***68 | Plate As | 1 |
154-4929 Lines Gp-Coupler
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
146-7961 Lines Gp-Front
| 14***11 | Hose As | 1 |
| 14***12 | Hose As | 1 |
| 14***15 | Hose As | 2 |
211-1064 Lines Gp-Front
| 14***23 | Hose As | 1 |
| 14***24 | Hose As | 2 |
| 14***51 | Tube As | 1 |
212-3358 Lines Gp-Front -Third Function
| 14***12 | Hose As | 1 |
| 14***21 | Connector As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
146-0120 Lines Gp-Front
| 14***20 | Lines Group-Front | 1 |
| 14***21 | Hose As | 2 |
| 14***22 | Hose As | 1 |
212-3359 Lines Gp-Front -Fourth Function
| 10***81 | Spacer; (13.5x25x40-mm Thk) | 2 |
| 14***21 | Connector As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
191-6154 Lines Gp-Front
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***25 | Connector As. | 6 |
| 14***68 | Elbow Group | 2 |
194-3749 Lines Gp-Front
| 10***81 | Spacer; (13.5x25x40-mm Thk) | 2 |
| 14***21 | Hose As | 2 |
| 14***21 | Connector As | 2 |
191-6155 Lines Gp-Front
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***25 | Connector As. | 6 |
| 14***68 | Elbow Group | 2 |
211-1063 Lines Gp-Hydraulic -Third Function
| 14***12 | Hose As | 1 |
| 14***13 | Tube As | 1 |
| 14***14 | Tube As | 1 |
132-2375 Lines Gp-Hydraulic
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 12***09 | Hose-Hydraulic; (36-In) | 0 |
| 13***75 | Lines Group-Hydraulic | 1 |
154-4923 Lines Gp-Hydraulic -Load Control
| 08***91 | Bolt; (M10x1.5x55-mm) | 2 |
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 1 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
146-0110 Lines Gp-Hydraulic
| 14***10 | Lines Group-Hydraulic | 1 |
| 14***11 | Hose As | 1 |
| 14***12 | Hose As | 1 |
209-6898 Lines Gp-Hydraulic
| 09***35 | Connector | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
189-0950 Lines Gp-Hydraulic
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 12***09 | Hose-Hydraulic; (36-In) | 1 |
| 13***63 | Hose As | 1 |
195-3288 Lines Gp-Hydraulic Fan
| 14***72 | Elbow Group | 1 |
| 14***81 | Elbow Group | 1 |
| 14***85 | Elbow; (45°) | 1 |
195-3289 Lines Gp-Hydraulic Fan
| 14***16 | Connector Group | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***51 | Elbow Group | 1 |
140-9260 Lines Gp-Hydraulic Fan
| 11***40 | Spacer; (13.1x15.9x36.5-mm Thk)(36.5mm Thk) | 1 |
| 12***47 | Elbow | 1 |
| 14***60 | Lines Group-Hydraulic Fan | 1 |
132-2365 Lines Gp-Lift Cylinder
| 13***65 | Lines Group-Lift Cylinder | 1 |
| 13***67 | Hose As | 2 |
| 14***11 | Hose As | 2 |
212-3357 Lines Gp-Lift Cylinder
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***71 | Hose As | 1 |
| 14***21 | Connector As | 2 |
214-3441 Lines Gp-Lift Cylinder
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 13***67 | Hose As | 2 |
148-7770 Lines Gp-Lift Cylinder
| 14***23 | Tube As | 1 |
| 14***24 | Tube As | 1 |
| 14***70 | Lines Group-Lift Cylinder | 1 |
146-0100 Lines Gp-Pilot
| 11***40 | Spacer; (13.1x15.9x36.5-mm Thk)(36.5mm Thk) | 2 |
| 11***32 | Hose As | 1 |
| 13***76 | Hose As | 1 |
211-4798 Lines Gp-Pump
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 12***09 | Hose-Hydraulic; (36-In) | 1 |
| 13***76 | Hose As | 1 |
212-3360 Lines Gp-Pump
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 12***09 | Hose-Hydraulic; (36-In) | 1 |
| 13***63 | Hose As | 1 |
223-5910 Lines Gp-Ride Control
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 12***11 | Hose As | 1 |
| 15***56 | Tee As | 1 |
214-3440 Lines Gp-Tilt Cylinder
| 10***03 | Elbow | 1 |
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 13***73 | Tube As | 1 |
212-3354 Lines Gp-Tilt Cylinder
| 11***40 | Spacer; (13.1x15.9x36.5-mm Thk)(36.5mm Thk) | 2 |
| 13***93 | Bracket | 1 |
| 13***98 | Bracket | 1 |
132-2385 Lines Gp-Tilt Cylinder
| 10***03 | Elbow | 1 |
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 13***71 | Tube As | 1 |
148-7760 Lines Gp-Tilt Cylinder
| 13***71 | Tube As | 1 |
| 13***72 | Tube As | 1 |
| 13***93 | Bracket | 1 |
193-4750 Manifold Gp-Control -Quick Coupler
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 15***25 | Valve Group-Shuttle; (Quick Coupler) | 2 |
| 16***61 | Ring-Backup | 2 |
192-7495 Motor & Mtg Gp-Hydraulic Fan
140-9257 Motor & Mtg Gp-Hydraulic Fan
168-2417 Motor & Mtg Gp-Hydraulic Fan
192-7496 Motor & Mtg Gp-Hydraulic Fan
200-2845 Motor Ar-Hydraulic Fan
200-2844 Motor Ar-Hydraulic Fan
195-3287 Motor Ar-Hydraulic Fan
195-3285 Motor Ar-Hydraulic Fan
146-9824 Motor Gp-Gear -Hydraulic Fan
179-3228 Motor Gp-Gear
176-0206 Motor Gp-Gear -Hydraulic Fan
192-7741 Motor Gp-Gear -Reversing Hydraulic Fan
192-7742 Motor Gp-Gear -Hydraulic Fan
162-3108 Motor Gp-Gear -Hydraulic Fan
140-9294 Mounting Gp-Bank Valve
189-0946 Mounting Gp-Bank Valve
211-4767 Mounting Gp-Control Valve
175-9443 Pivot Gp-Pilot Valve -Auxiliary
160-6299 Pivot Gp-Pilot Valve
160-6300 Pivot Gp-Pilot Valve -Lift
147-3114 Pivot Gp-Pilot Valve -Auxiliary
147-3322 Plate Gp-Pilot Valve -Joystick
140-9259 Pump & Mtg Gp-Brake & Hyd Fan
132-2476 Pump & Mtg Gp-Impl & Steering
168-7873 Pump Gp-Piston -Rear-Steering, Pilot
163-2428 Pump Gp-Piston -Implement, Steering, Pilot
168-9027 Pump Gp-Piston -Front-Implement
168-7868 Rotating Gp-Pump
140-9175 Tank & Mtg Gp-Hydraulic
140-9176 Tank Gp-Hydraulic
140-9192 Tank Gp-Hydraulic
208-6050 Valve & Mtg Gp-Control
205-5633 Valve & Mtg Gp-Control
146-2642 Valve Gp-Bank 2
| 13***16 | Seal-Integral | 3 |
| 13***67 | Manifold | 1 |
| 13***68 | Cover | 1 |
141-4332 Valve Gp-Bank 2
| 13***16 | Seal-Integral | 3 |
| 13***67 | Manifold | 1 |
| 13***68 | Cover | 1 |
146-2643 Valve Gp-Bank 3
| 13***16 | Seal-Integral | 4 |
| 13***67 | Manifold | 1 |
| 13***68 | Cover | 1 |
141-4333 Valve Gp-Bank 3
| 13***16 | Seal-Integral | 4 |
| 13***67 | Manifold | 1 |
| 13***68 | Cover | 1 |
141-4334 Valve Gp-Bank 4
| 13***16 | Seal-Integral | 5 |
| 13***67 | Manifold | 1 |
| 13***68 | Cover | 1 |
146-2644 Valve Gp-Bank 4
| 13***16 | Seal-Integral | 5 |
| 13***67 | Manifold | 1 |
| 13***68 | Cover | 1 |
173-4032 Valve Gp-Combination -Tilt Relief
| 17***32 | Valve Group-Combination; -Tilt Relief | 1 |
| 17***61 | Valve Group-Relief; -Tilt | 1 |
| 17***62 | Valve Group-Diverter; (Tilt) | 1 |
141-4331 Valve Gp-Control
| 09***50 | Seal-O-Ring (Id=10.82mm) | 2 |
| 10***57 | Valve | 1 |
| 13***56 | Spring-Relief | 1 |
142-2900 Valve Gp-Control
| 09***50 | Seal-O-Ring (Id=10.82mm) | 2 |
| 14***00 | Valve-Poppet | 2 |
| 14***58 | Adjuster | 2 |
216-7502 Valve Gp-Control -Auxiliary
| 21***55 | Bolt-Socket Head; (M5x0.8x55-mm) | 4 |
| 21***28 | Retainer | 1 |
| 21***29 | Retainer | 1 |
172-8571 Valve Gp-Control
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 13***57 | Plug | 1 |
142-2899 Valve Gp-Control
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 13***57 | Plug | 1 |
142-2898 Valve Gp-Control
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 13***57 | Plug | 1 |
| 13***35 | Poppet-Relief | 1 |
209-0275 Valve Gp-Main Control -4-Function
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 06***38 | Seal-O-Ring; (7.65 mm Id) | 3 |
| 12***56 | Bolt-Socket Head; (M5x0.8x60-mm) | 2 |
209-0270 Valve Gp-Main Control
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***34 | Seal-O-Ring | 1 |
| 06***38 | Seal-O-Ring; (7.65 mm Id) | 1 |
209-0271 Valve Gp-Main Control -3-Function
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 06***38 | Seal-O-Ring; (7.65 mm Id) | 2 |
| 12***56 | Bolt-Socket Head; (M5x0.8x60-mm) | 2 |
209-0274 Valve Gp-Main Control -3-Function
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 06***38 | Seal-O-Ring; (7.65 mm Id) | 2 |
| 12***56 | Bolt-Socket Head; (M5x0.8x60-mm) | 2 |
209-0273 Valve Gp-Main Control -2-Function
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 06***38 | Seal-O-Ring; (7.65 mm Id) | 1 |
| 12***56 | Bolt-Socket Head; (M5x0.8x60-mm) | 2 |
209-0272 Valve Gp-Main Control -4-Function
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***34 | Seal-O-Ring | 1 |
| 06***38 | Seal-O-Ring; (7.65 mm Id) | 2 |
112-1817 Valve Gp-Manual -Lowering Control
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
172-3208 Valve Gp-Pilot -Joystick
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***97 | Plate | 1 |
| 13***98 | Retainer | 1 |
160-4234 Valve Gp-Pilot
| 03***39 | Ring-Retaining | 4 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 2 |
212-1306 Valve Gp-Pilot -4-Function
| 03***39 | Ring-Retaining | 8 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 4 |
212-1302 Valve Gp-Pilot -Joystick, 2-Function
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***97 | Plate | 1 |
| 13***98 | Retainer | 1 |
142-2644 Valve Gp-Pilot -Joystick, 2-Lever
| 03***39 | Ring-Retaining | 4 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 2 |
172-3212 Valve Gp-Pilot
| 03***39 | Ring-Retaining | 4 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 2 |
212-1301 Valve Gp-Pilot -2-Function
| 03***39 | Ring-Retaining | 4 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 2 |
142-2645 Valve Gp-Pilot -Joystick, 1-Lever
| 03***39 | Ring-Retaining | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 1 |
172-3210 Valve Gp-Pilot -Joystick And One Lever
| 03***39 | Ring-Retaining | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 1 |
212-1307 Valve Gp-Pilot -Joystick, 4-Function
| 03***39 | Ring-Retaining | 4 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 2 |
172-3207 Valve Gp-Pilot -2-Lever
| 03***39 | Ring-Retaining | 4 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 2 |
160-4235 Valve Gp-Pilot
| 03***39 | Ring-Retaining | 6 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 3 |
212-1305 Valve Gp-Pilot -Joystick, 4-Function
| 03***39 | Ring-Retaining | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 1 |
136-9289 Valve Gp-Pilot -Joystick, 2-Function
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***89 | Valve Group-Pilot; -Joystick, 2-Function | 1 |
| 13***97 | Plate | 1 |
212-1304 Valve Gp-Pilot -3-Function
| 03***39 | Ring-Retaining | 6 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 3 |
160-4236 Valve Gp-Pilot -4-Lever
| 03***39 | Ring-Retaining | 8 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 4 |
172-3209 Valve Gp-Pilot -3-Lever
| 03***39 | Ring-Retaining | 6 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***92 | Boot | 3 |
145-8711 Valve Gp-Pilot Cartridge
| 11***27 | Orifice | 1 |
| 13***04 | Adapter | 1 |
| 14***07 | Spring; (Inner) | 1 |
212-4963 Valve Gp-Pilot Cartridge
| 11***27 | Orifice | 1 |
| 13***04 | Adapter | 1 |
| 14***16 | Retainer | 2 |
137-0266 Valve Gp-Pilot Cartridge
| 11***27 | Orifice | 1 |
| 13***66 | Valve Group-Pilot Cartridge; -Lift | 1 |
| 14***07 | Spring; (Inner) | 1 |
172-0223 Valve Gp-Pilot Cartridge
| 11***27 | Orifice | 1 |
| 13***04 | Adapter | 1 |
| 14***16 | Retainer | 2 |
212-4962 Valve Gp-Pilot Cartridge
| 11***27 | Orifice | 1 |
| 13***04 | Adapter | 1 |
| 14***16 | Retainer | 2 |
170-8513 Valve Gp-Pilot Cartridge
| 11***27 | Orifice | 1 |
| 13***04 | Adapter | 1 |
| 14***51 | Spring | 1 |
160-0309 Valve Gp-Pilot Cartridge
| 16***09 | Valve Group-Pilot Cartridge | 1 |
| 16***52 | Ball | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
172-0222 Valve Gp-Pilot Cartridge
| 11***27 | Orifice | 1 |
| 13***04 | Adapter | 1 |
| 14***16 | Retainer | 2 |
185-5209 Valve Gp-Pressure Reducing -Pilot Oil
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 11***97 | Check Valve Group | 1 |
| 12***85 | Ring-Backup | 1 |
184-9975 Valve Gp-Pressure Reducing
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***43 | Seal-O-Ring | 1 |
| 18***75 | Valve Group-Pressure Reducing | 1 |
224-3188 Valve Gp-Pump Control -Pressure, Flow Compensator-Steering, Pilot
| 03***43 | Seal-O-Ring | 1 |
| 19***36 | Spring | 1 |
| 20***59 | Housing | 1 |
168-7323 Valve Gp-Pump Control -Pressure, Flow Compensator-Implement, Steering, Pilot
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 16***23 | Valve Group-Pump Control; -Pressure, Flow Compensator-Implement, Steering, Pilot | 1 |
192-0086 Valve Gp-Ride Control
| 14***46 | Kit-Seal; (Valve) | 1 |
| 16***69 | Orifice As | 1 |
| 19***08 | Cartridge As | 1 |
143-9354 Valve Gp-Shutoff -Hydraulic Lockout
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 12***54 | Plate; (6-mm Thk) | 1 |
| 12***56 | Plate; (4-mm Thk) | 1 |
208-6642 Valve Gp-Shutoff -Hydraulic Lockout
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 12***54 | Plate; (6-mm Thk) | 1 |
201-0950 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***33 | Coil As; (24-Volt) | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 2 |
152-8340 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 14***87 | Coil As; (24-Volt) | 1 |
136-1679 Valve Gp-Solenoid -Clutch
| 10***15 | Cartridge Assem. | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
134-9878 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***78 | Valve Group-Solenoid | 1 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
189-2100 Valve Gp-Solenoid -Hydraulic Fan
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 18***89 | Coil As; (24-Volt) | 1 |
3e-9205 Valve Gp-Solenoid
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***48 | Kit-Seal; (Solenoid Valve) | 1 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 2 |
176-8305 Valve Gp-Solenoid & Manifold -Quick Coupler
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 1 |
| 15***25 | Valve Group-Shuttle; (Quick Coupler) | 2 |
| 17***04 | Manifold As | 1 |
Implements
219-5955 Bracket Gp-Support
| 13***94 | Plate As | 1 |
| 21***35 | Bracket | 1 |
| 21***55 | Bracket Group-Support | 1 |
148-7790 Control Gp-Bucket
| 14***90 | Control Group-Bucket | 1 |
| 14***97 | Lever As | 1 |
| 14***98 | Link As | 1 |
132-2350 Control Gp-Work Tool -Standard Lift Machines
| 00***39 | Adapter-Pipe | 1 |
| 10***76 | Seal-O-Ring | 4 |
| 11***22 | Seal-O-Ring | 2 |
148-7680 Control Gp-Work Tool -High Lift Machines
| 00***39 | Adapter-Pipe | 1 |
| 10***76 | Seal-O-Ring | 4 |
| 11***22 | Seal-O-Ring | 2 |
176-7609 Control Gp-Work Tool
| 14***81 | Lever & Bushing As; (Tilt, Front) | 1 |
| 14***85 | Arm & Bearing As-Lift | 1 |
| 15***00 | Bearing-Sleeve | 4 |
Lubrication System
186-5904 Breather Gp
| 10***55 | Hose (400 cm) | 0 |
| 14***44 | Spacer; (11x19x20-mm Thk) | 2 |
| 16***22 | Hose; (Crankcase Breather) | 1 |
159-3265 Breather Gp
| 10***55 | Hose (400 cm) | 0 |
| 14***44 | Spacer; (11x19x20-mm Thk) | 2 |
| 15***65 | Breather Group | 1 |
162-8233 Gauge Gp-Oil Level (Dipstick)
| 16***33 | Gauge Group-Oil Level (Dipstick) | 1 |
| 16***88 | Gauge As-Oil Level (Dipstick); (Engine) | 1 |
| 16***89 | Tube As-Oil Gauge | 1 |
170-2228 Pump Gp-Engine Oil
| 06***33 | Gasket | 1 |
| 10***17 | Pump As-Engine Oil | 1 |
| 10***16 | Bolt; (M6x16-mm) | 2 |
140-8911 Valve Gp-Fluid Sampling
| 14***11 | Valve Group-Fluid Sampling | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 6V***29 | Adapter | 1 |
Machine Arrangement
154-7508 Chassis Ar
| 11***67 | Battery Group; -12-Volt, 900-Ampere | 1 |
| 11***90 | Hitch Group-Articulating | 1 |
| 13***70 | Control Group-Parking Brake | 1 |
146-3216 Chassis Ar
| 11***67 | Battery Group; -12-Volt, 900-Ampere | 1 |
| 11***90 | Hitch Group-Articulating | 1 |
| 13***70 | Control Group-Parking Brake | 1 |
154-7507 Common Ar
| 13***90 | Power Train Ar | 1 |
| 13***13 | Engine Ar-Primary | 1 |
| 15***07 | Common Ar | 1 |
146-3215 Common Ar
| 13***90 | Power Train Ar | 1 |
| 13***13 | Engine Ar-Primary | 1 |
| 14***15 | Common Ar | 1 |
154-1934 Conversion Ar-Certification
| 15***34 | Conversion Ar-Certification | 1 |
| 16***18 | Film; (Roading Height) | 1 |
134-1554 Conversion Ar-Certification
| 10***41 | Visor Group-Cab | 1 |
| 13***54 | Conversion Ar-Certification | 1 |
217-4498 Conversion Ar-Certification -Italian
| 10***03 | Restrainer | 1 |
| 10***69 | Plate As | 1 |
| 12***65 | Lighting Group-Warning Beacon | 1 |
212-4503 Conversion Ar-Machine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
197-7693 Waste Handling Ar
| 13***48 | Guard Group-Crankcase | 1 |
| 16***20 | Guard Group-Drive Shaft; -Versalink | 1 |
| 16***12 | Guard Group-Power Train | 1 |
197-7692 Waste Handling Ar
| 13***48 | Guard Group-Crankcase | 1 |
| 16***20 | Guard Group-Drive Shaft; -Versalink | 1 |
| 16***12 | Guard Group-Power Train | 1 |
200-4438 Waste Handling Ar
| 16***25 | Guard Group-Drive Shaft; -Z-Bar Linkage | 1 |
| 17***60 | Guard Group-Window | 1 |
| 19***35 | Guard Group-Lighting; -Front, Rear | 1 |
200-5385 Waste Handling Ar
| 13***48 | Guard Group-Crankcase | 1 |
| 16***25 | Guard Group-Drive Shaft; -Z-Bar Linkage | 1 |
| 16***12 | Guard Group-Power Train | 1 |
200-4437 Waste Handling Ar
| 16***20 | Guard Group-Drive Shaft; -Versalink | 1 |
| 17***60 | Guard Group-Window | 1 |
| 19***35 | Guard Group-Lighting; -Front, Rear | 1 |
197-7694 Waste Handling Ar
| 13***48 | Guard Group-Crankcase | 1 |
| 16***25 | Guard Group-Drive Shaft; -Z-Bar Linkage | 1 |
| 16***12 | Guard Group-Power Train | 1 |
Operator Station
186-6190 Accumulator Gp-Refrigerant -Charged
| 18***90 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
173-1028 Adjuster Gp-Seat
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
214-0783 Air Compressor Gp-Seat
| 17***58 | Mount | 1 |
| 18***07 | Screw-Drive; (No 8x1.25-In) | 3 |
| 21***58 | Conduit-Flexible; (227-cm) | 0 |
237-3970 Air Compressor Gp-Seat
| 23***70 | Air Compressor Group-Seat | 1 |
107-5980 Air Conditioner & Mounting Gp -With Cable Control
| 10***80 | Air Conditioner & Mounting Group; -With Cable Control | 1 |
| 10***70 | Switch As-Rocker; (Air Conditioner Control) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
205-0526 Air Conditioner Ar
| 10***80 | Air Conditioner & Mounting Group; -With Cable Control | 1 |
| 14***65 | Condenser & Mtg Group-Refrigerant | 1 |
| 14***19 | Lines Group-Air Conditioner | 1 |
311-8547 Air Conditioner Gp
| 03***26 | Retainer | 1 |
| 10***41 | Clip; (Slot) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
180-9873 Air Conditioner Gp
| 03***26 | Retainer | 1 |
| 03***38 | Clamp | 2 |
| 10***43 | Plate-Orifice | 2 |
107-3318 Air Conditioner Gp
| 03***26 | Retainer | 1 |
| 03***38 | Clamp | 2 |
| 10***43 | Plate-Orifice | 2 |
214-7636 Arm Gp-Window Wiper -Front
| 13***88 | Clip | 3 |
| 13***90 | Nozzle As-Washer | 1 |
| 19***21 | Bolt-Socket Head; (M6x1x25-mm) | 4 |
307-0205 Arm Gp-Window Wiper -Rear
| 13***88 | Clip | 3 |
| 13***95 | Nozzle As-Washer | 1 |
| 19***21 | Bolt-Socket Head; (M6x1x25-mm) | 2 |
8y-4200 Armrest Gp -Rh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 1K***72 | Locknut Horn To Guard | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 1 |
8y-6000 Armrest Gp -Lh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 1K***72 | Locknut Horn To Guard | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 1 |
8y-5904 Armrest Gp
| 3E***12 | Nut-Square; (3/8-16-Thd) | 1 |
| 6V***87 | Screw-Pan Head; (10-24x1-In) | 4 |
| 8S***03 | Ring-Retaining | 1 |
162-8447 Armrest Gp -Lh
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***47 | Armrest Group; -Lh | 1 |
| 16***49 | Bracket Assem.; (Lh) | 1 |
162-8448 Armrest Gp -Rh
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***48 | Armrest Group; -Rh | 1 |
| 16***48 | Bracket Assem.; (Rh) | 1 |
211-4615 Cab Ar
| 11***22 | Lighting Group-Flood; -4-Lamp, Cab | 1 |
| 17***49 | Rops Group-Enclosed | 1 |
| 21***15 | Cab Ar | 1 |
211-7703 Cab Ar
| 10***27 | Pedal Group-Governor | 1 |
| 10***28 | Wiper Group-Window | 1 |
| 10***30 | Duct Group-Cab Air | 1 |
149-0408 Cab Ar
| 10***16 | Rops Group-Enclosed | 1 |
| 10***27 | Pedal Group-Governor | 1 |
| 10***28 | Wiper Group-Window | 1 |
211-7696 Cab Ar
| 10***27 | Pedal Group-Governor | 1 |
| 10***28 | Wiper Group-Window | 1 |
| 10***29 | Heater & Mtg Group-Cab; -With Cable Control | 1 |
177-9093 Cab Ar-Enclosed Rops
| 16***37 | Operator Ar-Enclosed Rops | 1 |
| 17***15 | Skirt Group-Cab | 1 |
| 17***93 | Cab Ar-Enclosed Rops | 1 |
177-9095 Cab Ar-Enclosed Rops
| 16***37 | Operator Ar-Enclosed Rops | 1 |
| 17***15 | Skirt Group-Cab | 1 |
| 17***95 | Cab Ar-Enclosed Rops | 1 |
177-9097 Cab Ar-Enclosed Rops
| 16***38 | Operator Ar-Enclosed Rops | 1 |
| 17***15 | Skirt Group-Cab | 1 |
| 17***97 | Cab Ar-Enclosed Rops | 1 |
149-0410 Cab Ar-Enclosed Rops
| 10***16 | Rops Group-Enclosed | 1 |
| 10***27 | Pedal Group-Governor | 1 |
| 10***28 | Wiper Group-Window | 1 |
190-4751 Cab Ar-Enclosed Rops
| 17***15 | Skirt Group-Cab | 1 |
| 19***50 | Operator Ar | 1 |
| 19***51 | Cab Ar-Enclosed Rops | 1 |
177-9092 Cab Ar-Enclosed Rops
| 14***07 | Operator Ar-Enclosed Rops | 1 |
| 17***14 | Skirt Group-Cab | 1 |
| 17***92 | Cab Ar-Enclosed Rops | 1 |
177-9099 Cab Ar-Enclosed Rops
| 16***38 | Operator Ar-Enclosed Rops | 1 |
| 17***15 | Skirt Group-Cab | 1 |
| 17***99 | Cab Ar-Enclosed Rops | 1 |
177-9096 Cab Ar-Enclosed Rops
| 14***09 | Operator Ar-Enclosed Rops | 1 |
| 17***14 | Skirt Group-Cab | 1 |
| 17***96 | Cab Ar-Enclosed Rops | 1 |
111-7864 Cab Gp-Enclosed Rops
| 10***44 | Glass-Front; (Lh) | 1 |
| 10***45 | Glass-Front; (Center)(Lh) | 1 |
| 10***46 | Glass-Cab Corner; (Lh Rear) | 1 |
174-9755 Cab Gp-Enclosed Rops
| 10***44 | Glass-Front; (Lh) | 1 |
| 10***45 | Glass-Front; (Center)(Lh) | 1 |
| 10***46 | Glass-Cab Corner; (Lh Rear) | 1 |
177-9090 Canopy Ar-Open Rops
| 14***11 | Operator Ar-Open Rops | 1 |
| 17***13 | Skirt Group-Cab | 1 |
| 17***90 | Canopy Ar-Open Rops | 1 |
205-0520 Canopy Gp-Open Rops
| 12***68 | Lighting Group-Flood; -4-Lamp, Canopy | 1 |
| 17***64 | Rops Group-Open | 1 |
| 20***20 | Canopy Group-Open Rops | 1 |
106-5122 Compressor Gp-Refrigerant
| 10***22 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
| 7T***32 | Plug Assem.; (3/8-24) | 1 |
| 9X***85 | Seal-O-Ring (20.22mm Id) | 2 |
149-6935 Compressor Gp-Refrigerant
| 10***22 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
| 14***23 | Plate As | 1 |
| 14***24 | Bracket As | 1 |
201-1802 Compressor Gp-Refrigerant
| 10***22 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
| 14***24 | Bracket As | 1 |
| 15***84 | Bolt; (M10x1.5x140-mm) | 1 |
146-0165 Condenser & Mtg Gp-Refrigerant
| 14***61 | Core As-Condenser | 1 |
| 14***62 | Hinge | 1 |
| 14***65 | Condenser & Mtg Group-Refrigerant | 1 |
149-4612 Console Gp-Operator
| 11***49 | Support As | 1 |
| 11***75 | Plate | 1 |
| 14***12 | Console Group-Operator | 1 |
185-1124 Control Gp-Handle
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***64 | Control Group-Relay | 1 |
149-4358 Control Gp-Handle -Downshift
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***62 | Handle Group-Modular; -Joystick, 3-Function-Lift, Tilt, Tip W/Downshift | 1 |
| 14***58 | Control Group-Handle; -Transmission Downshift | 1 |
154-4954 Control Gp-Pilot Operated Hyd
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***50 | Support Assem. | 1 |
185-1120 Control Gp-Pilot Operated Hyd
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 14***65 | Cover | 1 |
| 17***08 | Valve Group-Pilot; -Joystick | 1 |
175-6612 Control Gp-Pilot Operated Hyd
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***50 | Support Assem. | 1 |
185-1373 Control Gp-Pilot Operated Hyd
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 13***89 | Valve Group-Pilot; -Joystick, 2-Function | 1 |
| 14***65 | Cover | 1 |
145-0305 Control Gp-Pilot Operated Hyd
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***50 | Support Assem. | 1 |
| 14***88 | Film-Instrument; (Implement Lockout) | 1 |
175-6611 Control Gp-Pilot Operated Hyd
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***50 | Support Assem. | 1 |
| 14***88 | Film-Instrument; (Implement Lockout) | 1 |
185-1121 Control Gp-Pilot Operated Hyd
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 11***37 | Rod | 1 |
| 12***01 | Knob; (Auxiliary) | 1 |
154-4955 Control Gp-Pilot Operated Hyd
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***37 | Switch As-Kickout; (Bucket, Fork Selector) | 1 |
154-4953 Control Gp-Pilot Operated Hyd
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***50 | Support Assem. | 1 |
145-0307 Control Gp-Pilot Operated Hyd
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***50 | Support Assem. | 1 |
| 11***37 | Rod | 1 |
185-1374 Control Gp-Pilot Operated Hyd
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 11***37 | Rod | 1 |
| 12***01 | Knob; (Auxiliary) | 1 |
145-0306 Control Gp-Pilot Operated Hyd
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***50 | Support Assem. | 1 |
| 11***37 | Rod | 1 |
175-6613 Control Gp-Pilot Operated Hyd
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***50 | Support Assem. | 1 |
| 11***37 | Rod | 1 |
175-6610 Control Gp-Pilot Operated Hyd
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***50 | Support Assem. | 1 |
185-5633 Control Gp-Pilot Operated Hyd
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***50 | Support Assem. | 1 |
| 11***37 | Rod | 1 |
149-4190 Control Gp-Steering
| 10***07 | Support Assem. | 1 |
| 10***41 | Cover | 1 |
| 11***78 | Cover | 1 |
149-4189 Control Gp-Steering
| 10***07 | Support Assem. | 1 |
| 10***41 | Cover | 1 |
| 11***74 | Seal | 1 |
149-4360 Control Gp-Transmission
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***62 | Screw-Machine; (4-40x0.63-In) | 2 |
139-5206 Control Gp-Transmission
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
201-0211 Control Gp-Transmission
| 10***61 | Wire Assembly; (Rear) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***59 | Wedge-Plug Lock; (8-Pin) | 1 |
130-6260 Control Gp-Transmission
| 10***61 | Wire Assembly; (Rear) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***60 | Control Group-Transmission | 1 |
138-0433 Conversion Ar-Eng Speed Cont -Kit
| 10***70 | Module Group | 1 |
| 10***71 | Module Group | 1 |
| 10***72 | Actuator Group | 1 |
163-4323 Conversion Ar-Road Spd Limiter
| 10***27 | Film-Identification; (20-Km/H)(20 Kph) | 3 |
| 13***33 | Conversion Ar-Eng Speed Cont; -Kit | 1 |
| 16***23 | Conversion Ar-Road Spd Limiter | 1 |
118-0809 Dash Gp
| 11***09 | Dash Group | 1 |
| 16***87 | Dash Assem. | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 4 |
107-6137 Defroster Gp-Cab
| 10***34 | Switch As; (Defroster) | 1 |
| 10***37 | Defroster Group-Cab | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
231-0319 Door Gp-Cab -Sliding Window, Rh
| 11***02 | Cover; (Rh)(Rh) | 1 |
| 11***28 | Handle As-Paddle | 1 |
| 14***80 | Ring-Retaining | 1 |
164-4566 Door Gp-Cab -Sliding Window, Rh
| 09***23 | Ring-Retaining; (External) | 2 |
| 10***04 | Insert | 2 |
| 10***25 | Hinge Assem. | 2 |
231-0318 Door Gp-Cab -Rh
| 09***23 | Ring-Retaining; (External) | 2 |
| 10***04 | Insert | 2 |
| 10***20 | Plate As | 1 |
137-7602 Door Gp-Cab -Fixed Windows
| 13***02 | Door Group-Cab; -With Fixed Windows | 1 |
| 16***63 | Door Group-Cab; -Fixed Window, Lh | 1 |
| 16***64 | Door Group-Cab; -Fixed Window, Rh | 1 |
231-0320 Door Gp-Cab -Fixed Window, Rh
| 11***02 | Cover; (Rh)(Rh) | 1 |
| 11***28 | Handle As-Paddle | 1 |
| 14***80 | Ring-Retaining | 1 |
137-7603 Door Gp-Cab -Sliding Windows
| 13***03 | Door Group-Cab; -With Sliding Windows | 1 |
| 16***65 | Door Group-Cab; -Sliding Window, Lh | 1 |
| 16***66 | Door Group-Cab; -Sliding Window, Rh | 1 |
164-4564 Door Gp-Cab -Fixed Window, Rh
| 10***04 | Insert | 2 |
| 10***25 | Hinge Assem. | 2 |
| 11***01 | Handhold | 1 |
164-4565 Door Gp-Cab -Sliding Window, Lh
| 09***23 | Ring-Retaining; (External) | 2 |
| 10***04 | Insert | 2 |
| 10***17 | Cover; (Lh)(Lh) | 1 |
233-8013 Door Gp-Cab -Fixed Window, Lh
| 09***23 | Ring-Retaining; (External) | 2 |
| 10***04 | Insert | 2 |
| 10***17 | Cover; (Lh)(Lh) | 1 |
164-4563 Door Gp-Cab -Fixed Window, Lh
| 10***04 | Insert | 2 |
| 10***17 | Cover; (Lh)(Lh) | 1 |
| 10***25 | Hinge Assem. | 2 |
233-8012 Door Gp-Cab -Sliding Window, Lh
| 09***23 | Ring-Retaining; (External) | 2 |
| 10***04 | Insert | 2 |
| 10***17 | Cover; (Lh)(Lh) | 1 |
107-4630 Duct Gp-Cab Air
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 12 |
| 10***30 | Duct Group-Cab Air | 1 |
| 10***79 | Duct | 1 |
8y-6883 Extension Gp-Backrest -Cloth
| 11***30 | Kit-Cushion; (Cloth Backrest) | 1 |
| 8Y***77 | Pan As-Extension | 1 |
| 8Y***47 | Fastener | 2 |
119-4769 Filter Gp-Cab Air
| 11***38 | Filter Element-Cab Air; (Primary) | 1 |
| 11***44 | Cover | 1 |
| 11***56 | Knob-Control | 4 |
137-6351 Guard Gp-Vandalism
| 12***08 | Screw-Hex Socket; (M4x0.7x30-mm) | 4 |
| 13***40 | Plate Assem. | 1 |
| 13***80 | Plate Assem. | 1 |
175-6760 Guard Gp-Window
| 17***46 | Screen As; (Front) | 1 |
| 17***49 | Plate | 2 |
| 17***54 | Screen As; (Rh) | 1 |
175-6750 Guard Gp-Window
| 17***50 | Guard Group-Window | 1 |
| 17***60 | Guard Group-Window | 1 |
219-5959 Guard Gp-Window
| 17***60 | Guard Group-Window | 1 |
| 21***55 | Bracket Group-Support | 1 |
| 21***59 | Guard Group-Window | 1 |
148-9562 Control Gp-Handle -Downshift
| 14***62 | Handle Group-Modular; -Joystick, 3-Function-Lift, Tilt, Tip W/Downshift | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
107-4629 Heater & Mtg Gp-Cab
| 10***29 | Heater & Mtg Group-Cab; -With Cable Control | 1 |
| 11***59 | Gasket; (Air Conditioner) | 1 |
| 15***49 | Cable As; (Heater Temperature Control) | 1 |
205-0525 Heater Ar-Cab
| 10***29 | Heater & Mtg Group-Cab; -With Cable Control | 1 |
| 14***21 | Lines Group-Cab Heater | 1 |
| 20***25 | Cover, Heater Ar-Cab | 1 |
180-9874 Heater Gp-Cab
| 03***26 | Retainer | 1 |
| 03***38 | Clamp | 2 |
| 10***43 | Plate-Orifice | 2 |
107-3317 Heater Gp-Cab
| 03***26 | Retainer | 1 |
| 03***38 | Clamp | 2 |
| 10***43 | Plate-Orifice | 2 |
108-4582 Housing Gp-Seat Suspension
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
118-7244 Installation Gp-Radio
| 10***45 | Installation Group-Radio | 1 |
| 11***17 | Converter Group-Electrical | 1 |
| 11***44 | Installation Group-Radio | 1 |
107-4645 Installation Gp-Radio
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***45 | Installation Group-Radio | 1 |
124-2482 Installation Gp-Radio
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
107-4634 Liner Gp-Cab -Upper
| 10***34 | Liner Group-Cab | 1 |
| 10***32 | Lamp Group-Dome | 1 |
| 12***91 | Fastener-Loop; (12-cm Each) | 0 |
141-4986 Liner Gp-Cab -Lower
| 11***81 | Cover As; (Cab) | 1 |
| 11***61 | Cover | 1 |
| 12***96 | Bracket | 1 |
125-3962 Liner Gp-Cab -Lower
| 11***81 | Cover As; (Cab) | 1 |
| 12***96 | Bracket | 1 |
| 12***15 | Kit-Brush Seal; (Cab Liner, Lower) | 1 |
125-3961 Liner Gp-Cab -Lower
| 11***81 | Cover As; (Cab) | 1 |
| 11***61 | Cover | 1 |
| 12***96 | Bracket | 1 |
149-0719 Lines Gp-Air Conditioner
| 10***96 | Clip | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***61 | Grommet | 1 |
149-0721 Lines Gp-Cab Heater
| 14***21 | Lines Group-Cab Heater | 1 |
| 16***95 | Plate As | 1 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 4 |
117-6045 Mirror Gp-Rear View -Exterior
| 11***45 | Mirror Group-Rear View; -Exterior | 1 |
| 11***46 | Stay As; (Rh) | 1 |
| 11***47 | Stay As; (Lh) | 1 |
107-4643 Mirror Gp-Rear View -Interior
| 10***43 | Mirror Group-Rear View; -Interior | 1 |
| 11***56 | Plate | 2 |
| 23***46 | Nut-Jam; (3/8-16-Thd) | 2 |
107-4642 Mirror Gp-Rear View -Exterior
| 10***42 | Mirror Group-Rear View; -Exterior | 1 |
| 12***21 | Bracket Assem. (L.H.) | 1 |
| 12***22 | Bracket Assem. (R.H.) | 1 |
148-0642 Module Gp-Warning Indicator -Without Alarm
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 14***34 | Gasket; (Indicator Module) | 1 |
| 14***42 | Module Group-Warning Indicator; -Without Alarm | 1 |
148-0641 Module Gp-Warning Indicator -With Alarm
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***34 | Gasket; (Indicator Module) | 1 |
| 14***41 | Module Group-Warning Indicator; -With Alarm | 1 |
156-4271 Mounting Gp-Cab
| 15***71 | Mounting Group-Cab | 1 |
| 6Y***25 | Sleeve-Rops | 4 |
| 7X***67 | Bolt-Plt; (M24 X 3.0 X 160) | 4 |
190-4750 Operator Ar
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***36 | Washer Group-Window | 1 |
| 14***86 | Liner Group-Cab; -Lower | 1 |
205-0521 Operator Ar
| 10***27 | Pedal Group-Governor | 1 |
| 10***43 | Mirror Group-Rear View; -Interior | 1 |
| 11***08 | Support Group-Seat | 1 |
149-0412 Operator Ar
| 10***17 | Rops Group-Open | 1 |
| 14***12 | Operator Ar | 1 |
| 20***20 | Canopy Group-Open Rops | 1 |
184-5486 Operator Ar
| 10***70 | Switch As-Rocker; (Air Conditioner Control) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***59 | Gasket; (Air Conditioner) | 1 |
149-0409 Operator Ar-Enclosed Rops
| 10***37 | Defroster Group-Cab | 1 |
| 12***61 | Liner Group-Cab; -Lower | 1 |
| 13***36 | Washer Group-Window | 1 |
166-3637 Operator Ar-Enclosed Rops
| 10***37 | Defroster Group-Cab | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***36 | Washer Group-Window | 1 |
166-3638 Operator Ar-Enclosed Rops
| 10***37 | Defroster Group-Cab | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***36 | Washer Group-Window | 1 |
149-0407 Operator Ar-Enclosed Rops
| 10***37 | Defroster Group-Cab | 1 |
| 12***61 | Liner Group-Cab; -Lower | 1 |
| 13***36 | Washer Group-Window | 1 |
149-0411 Operator Ar-Open Rops
| 12***62 | Liner Group-Cab; -Lower | 1 |
| 14***11 | Operator Ar-Open Rops | 1 |
| 14***12 | Operator Ar | 1 |
292-6402 Pan Gp-Backrest -Lumbar
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***07 | Holder | 1 |
178-0605 Pan Gp-Backrest -Lumbar
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***30 | Pan As-Backrest | 1 |
292-9237 Pan Gp-Backrest -Cloth, Lumbar
| 16***83 | Knob-Lumbar | 1 |
| 25***28 | Plug | 3 |
| 29***97 | Cushion As-Back | 1 |
108-8421 Pan Gp-Backrest -Lumbar
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
| 10***23 | Shaft As-Lumbar | 1 |
| 10***24 | Pan-Lumbar | 1 |
178-0604 Pan Gp-Backrest -Cloth, Lumbar
| 16***83 | Knob-Lumbar | 1 |
| 17***04 | Pan Group-Backrest; -Cloth, Lumbar | 1 |
| 17***05 | Pan Group-Backrest; -Lumbar | 1 |
8y-5992 Pan Gp-Seat
| 3K***97 | Pin 3.18 mm(.125 In.) Diameter | 4 |
| 6V***56 | Ring-Retaining | 2 |
| 8Y***92 | Pan As-Seat; (Bottom) | 1 |
170-4573 Panel Gp-Instrument
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***16 | Plug | 1 |
170-4580 Panel Gp-Instrument
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***16 | Plug | 1 |
157-0299 Panel Gp-Instrument
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
157-0298 Panel Gp-Instrument
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
174-9730 Pedal Gp-Brake
| 10***56 | Pedal Assem.; (L.H.) | 1 |
| 11***32 | Pedal Assem.; (R.H) | 1 |
| 17***25 | Support As | 1 |
107-4627 Pedal Gp-Governor
| 10***27 | Pedal Group-Governor | 1 |
| 15***63 | Pedal Assem. | 1 |
| 17***76 | Governor Pedal Hardware Kit; (Consists Of U-Bolt, Clamp, Washer And Locknut) | 1 |
185-5637 Platform Ar
| 10***27 | Pedal Group-Governor | 1 |
| 10***29 | Heater & Mtg Group-Cab; -With Cable Control | 1 |
| 10***30 | Duct Group-Cab Air | 1 |
213-6478 Platform Ar
| 10***27 | Pedal Group-Governor | 1 |
| 10***30 | Duct Group-Cab Air | 1 |
| 10***80 | Air Conditioner & Mounting Group; -With Cable Control | 1 |
219-2849 Platform Gp-Operator -Brake Pedal
| 17***30 | Pedal Group-Brake | 1 |
| 21***49 | Platform Group-Operator; -With Brake Pedals | 1 |
| 21***50 | Floorplate As | 1 |
117-9621 Platform Gp-Operator
| 10***56 | Pedal Assem.; (L.H.) | 1 |
| 11***32 | Pedal Assem.; (R.H) | 1 |
| 11***63 | Floorplate As | 1 |
210-2270 Recliner Gp-Seat
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
174-9749 Rops Gp-Enclosed
| 09***79 | Plug | 7 |
| 17***30 | Pedal Group-Brake | 1 |
| 17***49 | Rops Group-Enclosed | 1 |
107-4616 Rops Gp-Enclosed
| 10***16 | Rops Group-Enclosed | 1 |
| 11***64 | Cab Group-Enclosed Rops | 1 |
| 11***21 | Platform Group-Operator | 1 |
107-4617 Rops Gp-Open
| 10***17 | Rops Group-Open | 1 |
| 11***21 | Platform Group-Operator | 1 |
| 11***55 | Cover | 1 |
174-9764 Rops Gp-Open
| 11***55 | Cover | 1 |
| 17***30 | Pedal Group-Brake | 1 |
| 17***63 | Canopy As | 1 |
118-7250 Screen Gp-Sun
| 11***50 | Screen Group-Sun; -Cab | 1 |
| 11***73 | Hook-Retainer | 2 |
118-0817 Seat & Mounting Gp
| 10***92 | Seat Group-Suspension | 1 |
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 4 |
| 11***17 | Seat & Mounting Group | 1 |
107-5978 Seat & Mounting Gp
| 10***78 | Seat & Mounting Group | 1 |
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
226-1845 Seat & Mounting Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 4 |
| 11***36 | Plate | 1 |
156-1148 Seat Belt Gp -Retractable
| 15***48 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 4D***32 | Locknut (7/16-20 Thd) | 1 |
226-4082 Seat Belt Gp -Retractable
| 1J***98 | Bolt; (7/16-20x3.5-In) | 1 |
| 22***82 | Seat Belt Group; -Retractable | 1 |
| 3K***13 | Washer-Hard; (.118mm Thk) | 2 |
129-7253 Seat Belt Gp -Retractable
| 12***53 | Seat Belt Group; -Retractable | 1 |
| 1J***98 | Bolt; (7/16-20x3.5-In) | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
226-4083 Seat Belt Gp -Retractable
| 1J***98 | Bolt; (7/16-20x3.5-In) | 1 |
| 22***83 | Seat Belt Group; -Retractable | 1 |
| 3K***13 | Washer-Hard; (.118mm Thk) | 2 |
136-5731 Seat Gp
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 4 |
| 11***36 | Plate | 1 |
| 11***64 | Seat Group-Suspension; -Cloth | 1 |
107-5977 Seat Gp -Cloth
| 10***77 | Seat Group; -Cloth | 1 |
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 4 |
| 11***36 | Plate | 1 |
178-0603 Seat Gp -Cloth
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
8y-6882 Seat Gp -Cloth, Lumbar
| 06***03 | Shim (.060mm Thk); (1.52-mm Thk) | 4 |
| 09***78 | Pin-Spring | 1 |
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
178-7914 Seat Gp -Cloth
| 16***47 | Armrest Group; -Lh | 1 |
| 16***48 | Armrest Group; -Rh | 1 |
| 17***03 | Seat Group; (Fabric) | 1 |
119-7128 Seat Gp -Cloth
| 11***28 | Seat Group | 1 |
| 15***48 | Seat Belt Group; -Retractable-Operator | 1 |
| 8Y***00 | Armrest Group | 1 |
118-0819 Seat Gp-Suspension
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 2 |
| 11***19 | Seat Group-Suspension | 1 |
119-8263 Seat Gp-Suspension -Cloth
| 11***52 | Kit-Frame As; (Seat)(Seat) | 1 |
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
219-8096 Seat Gp-Suspension -Air
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 17***14 | Seat Group; -Cloth | 1 |
119-8264 Seat Gp-Suspension -Cloth
| 10***80 | Kit-Switch; (Seat Sensor) | 1 |
| 10***81 | Kit-Heater; (Seat) | 1 |
| 11***52 | Kit-Frame As; (Seat)(Seat) | 1 |
8y-6977 Seat Gp-Suspension -Cloth, Lumbar
| 10***82 | Suspension Group-Seat; -Contour-Shock Absorber | 1 |
| 14***45 | Kit-Slider Block; (Suspension Seat) | 1 |
| 15***48 | Seat Belt Group; -Retractable-Operator | 1 |
108-2192 Seat Gp-Suspension -Vinyl
| 10***92 | Seat Group-Suspension | 1 |
| 11***51 | Upper Assem. Kit; (Included Marked J) | 1 |
| 11***52 | Kit-Frame As; (Seat)(Seat) | 1 |
174-2214 Skirt Gp-Cab
| 12***82 | Sheet As | 1 |
| 12***84 | Sheet As | 1 |
| 12***34 | Sheet As | 1 |
174-2215 Skirt Gp-Cab
| 12***82 | Sheet As | 1 |
| 12***84 | Sheet As | 1 |
| 13***43 | Strap As | 1 |
174-2213 Skirt Gp-Cab
| 12***82 | Sheet As | 1 |
| 13***43 | Strap As | 1 |
| 16***81 | Sheet As | 1 |
107-6132 Speedometer Gp
| 10***32 | Speedometer Group | 1 |
| 12***37 | Lamp; (12-Volt) | 1 |
| 13***24 | Seal | 1 |
118-0808 Support Gp-Seat
| 11***08 | Support Group-Seat | 1 |
| 11***10 | Cover Assem. | 1 |
| 7X***79 | Washer-Hard; (8.8x25.5x2-mm Thk) | 11 |
191-2933 Suspension Gp-Seat -Air
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***26 | Film-Instruction; (Seat Adjustment) | 1 |
| 16***35 | Spring | 1 |
108-4082 Suspension Gp-Seat
| 10***03 | Fastener | 23 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
150-7718 Suspension Gp-Seat -Air
| 10***17 | Bumper | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***57 | Shaft | 2 |
107-4641 Visor Gp-Cab
| 10***41 | Visor Group-Cab | 1 |
| 6V***32 | Nut-Weld (M6x6 Thd); (M10x1.5) (Weld) | 2 |
| 9R***03 | Plate | 2 |
131-1236 Washer Gp-Window
| 13***36 | Washer Group-Window | 1 |
| 13***37 | Bracket Assem. | 1 |
| 13***38 | Bracket As | 1 |
152-2764 Washer Gp-Window
| 15***63 | Reservoir; (Window Washer) | 1 |
| 15***64 | Washer Group-Window | 1 |
| 7T***90 | Pump As; (Washer) | 2 |
180-2535 Window Gp-Door -Cab
| 13***70 | Seal; (326-cm) | 0 |
| 14***69 | Stop | 1 |
| 15***15 | Gasket | 1 |
107-4628 Wiper Gp-Window
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***28 | Wiper Group-Window | 1 |
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
Power Train
6d-0337 Valve Gp-Tire
| 2D***28 | Core-Valve | 1 |
| 2D***29 | Grommet | 1 |
| 2D***30 | Washer-Ring | 1 |
138-2726 Axle Ar-Fixed -Front, Limited Slip Differential
| 13***14 | Brake & Planetary Group; -Single Disc | 2 |
| 13***16 | Housing Group-Fixed Axle; -Front | 1 |
| 13***26 | Axle Ar-Fixed; -Front, Limited Slip Differential-Single Disc Brake | 1 |
138-1615 Axle Ar-Fixed -Front, Standard Differential-Single Disc Brake
| 13***12 | Differential Group; -Standard | 1 |
| 13***14 | Brake & Planetary Group; -Single Disc | 2 |
| 13***15 | Axle Ar-Fixed; -Front, Standard Differential-Single Disc Brake | 1 |
138-1609 Axle Ar-Oscillating
| 13***09 | Axle Ar-Oscillating; -Rear, Standard Differential | 1 |
| 13***10 | Housing Group-Oscillating Axle | 1 |
| 13***11 | Gear Group-Bevel & Pinion; -Rear | 1 |
138-2727 Axle Ar-Oscillating
| 10***10 | Differential Group | 1 |
| 13***10 | Housing Group-Oscillating Axle | 1 |
| 13***14 | Brake & Planetary Group; -Single Disc | 2 |
203-2773 Axle Ar-Oscillating -Rear, Standard Differential
| 13***11 | Gear Group-Bevel & Pinion; -Rear | 2 |
| 13***12 | Differential Group; -Standard | 1 |
| 13***14 | Brake & Planetary Group; -Single Disc | 1 |
203-2778 Axle Ar-Oscillating -Rear, Limited Slip Differential
| 13***14 | Brake & Planetary Group; -Single Disc | 2 |
| 13***77 | Gear Group-Bevel & Pinion; -Rear | 1 |
| 20***74 | Housing Group-Oscillating Axle; -Rear | 1 |
138-1614 Brake & Planetary Gp -Single Disc
| 11***27 | Dowel | 3 |
| 13***14 | Brake & Planetary Group; -Single Disc | 1 |
| 13***45 | Pin-Spring | 3 |
146-6278 Case & Parts Gp-Planetary
| 00***69 | Cup-Roller Bearing | 2 |
| 10***70 | Cover Assem. | 1 |
| 10***80 | Shield Assem. | 1 |
102-7548 Clutch Gp -Reverse, Second
| 10***48 | Clutch Group; (Reverse And No.2) | 1 |
| 10***27 | Hub Assem. | 1 |
| 10***28 | Hub Assem. | 1 |
102-7540 Clutch Gp -First, Third
| 10***40 | Clutch Group; (No.1 And No.3) | 1 |
| 10***28 | Hub Assem. | 1 |
| 11***71 | Piston | 1 |
146-6283 Clutch Gp -Forward High, Forward Low
| 10***27 | Hub Assem. | 1 |
| 14***17 | Gear As; (33-Teeth) | 1 |
| 14***83 | Clutch Group; -Forward High, Forward Low | 1 |
148-1929 Control Gp-Transmission Hyd
| 12***01 | Clip | 1 |
| 12***02 | Clip Assem. | 6 |
| 14***29 | Control Group-Transmission Hydraulic | 1 |
103-2010 Differential Gp-Limited Slip
| 10***10 | Differential Group | 1 |
| 10***47 | Gear-Differential Bevel; (16-Teeth) | 2 |
| 10***49 | Pinion-Differential Bevel; (9-Teeth) | 4 |
138-1612 Differential Gp -Standard
| 13***05 | Washer-Thrust | 2 |
| 13***12 | Differential Group; -Standard | 1 |
| 6K***14 | Dowel | 1 |
206-9670 Differential Gp-Limited Slip
| 10***47 | Gear-Differential Bevel; (16-Teeth) | 2 |
| 10***49 | Pinion-Differential Bevel; (9-Teeth) | 4 |
| 10***50 | Shaft-Pinion | 2 |
141-8615 Drive Gp-Flexible Coupling
| 13***93 | Plate | 1 |
| 13***95 | Plate As | 1 |
| 14***15 | Drive Group-Flexible Coupling | 1 |
146-6274 Drive Gp-Pump -Transmission
| 10***99 | Bearing-Ball (88.9mm Id) | 1 |
| 14***21 | Gear-Drive; (72-Teeth) | 1 |
| 14***74 | Drive Group-Pump; -Transmission | 1 |
132-2465 Filler Gp-Power Train Oil
| 13***65 | Filler Group-Power Train Oil | 1 |
| 13***66 | Tube As | 1 |
| 13***67 | Tube As | 1 |
132-2472 Filter & Lines Gp-Hydraulic
| 12***56 | Filter Group-Oil | 1 |
| 13***72 | Filter & Lines Group-Hydraulic | 1 |
| 13***81 | Hose As | 1 |
122-6456 Filter Gp-Oil
| 12***56 | Filter Group-Oil | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
138-2777 Gear Gp-Bevel & Pinion -Rear
| 10***02 | Lock-Bearing | 1 |
| 13***77 | Gear Group-Bevel & Pinion; -Rear | 1 |
| 14***24 | Gear Set-Bevel; (39-Teeth) | 1 |
138-1617 Gear Gp-Bevel & Pinion -Front
| 10***02 | Lock-Bearing | 1 |
| 13***17 | Gear Group-Bevel & Pinion; -Front | 1 |
| 13***43 | Gear Set-Bevel; (39-Teeth) | 1 |
138-2776 Gear Gp-Bevel & Pinion -Front
| 10***02 | Lock-Bearing | 1 |
| 13***36 | Yoke As | 1 |
| 13***76 | Gear Group-Bevel & Pinion; -Front | 1 |
138-1611 Gear Gp-Bevel & Pinion -Rear
| 10***02 | Lock-Bearing | 1 |
| 13***11 | Gear Group-Bevel & Pinion; -Rear | 1 |
| 13***40 | Gear Set-Bevel | 1 |
146-6282 Gear Gp-Input Transfer
| 00***71 | Cone-Bearing | 2 |
| 14***22 | Gear; (47-Teeth) | 1 |
| 14***19 | Shaft-Input | 1 |
146-6284 Gear Gp-Output Transfer
| 10***75 | Yoke-Output | 1 |
| 10***76 | Yoke-Brake Flange | 1 |
| 12***56 | Lever As | 1 |
138-1616 Housing Gp-Fixed Axle -Front
| 06***12 | Ring-Retaining | 2 |
| 13***94 | Seal-Lip Type | 1 |
| 13***16 | Housing Group-Fixed Axle; -Front | 1 |
138-1610 Housing Gp-Oscillating Axle
| 06***12 | Ring-Retaining | 2 |
| 12***19 | Support-Trunnion; (Front) | 1 |
| 13***94 | Seal-Lip Type | 1 |
203-2774 Housing Gp-Oscillating Axle -Rear
| 06***12 | Ring-Retaining | 2 |
| 12***19 | Support-Trunnion; (Front) | 1 |
| 13***94 | Seal-Lip Type | 1 |
132-2480 Lines Gp-Torque Conv Cooler
| 05***58 | "P" Clip | 1 |
| 13***80 | Lines Group-Torque Conv Cooler | 1 |
| 13***82 | Hose As | 1 |
132-2471 Mounting Gp-Axle
| 13***71 | Mounting Group-Axle | 1 |
| 6K***87 | Dowel | 2 |
| 7X***65 | Bolt; (M24x3x180-mm) | 20 |
147-5071 Mounting Gp-Rim
| 14***71 | Mounting Group-Rim | 1 |
| 8T***67 | Washer-Hard; (26x44x4-mm Thk) | 16 |
| 8T***79 | Bolt-Plt; (M24 X 3.0 X 50) | 16 |
132-2490 Power Train Ar
| 12***52 | Seal-O-Ring | 4 |
| 12***53 | Bolt; (M12x1.75x46.5-mm) | 2 |
| 13***62 | Shaft Group-Drive | 1 |
6y-6712 Pump Gp-Transmission -1-Section Gear
| 3T***94 | Bearing-Sleeve | 4 |
| 5H***52 | Seal 5.73 In. (14.55 cm)Inside Dia. | 1 |
| 5M***87 | Dowel (Part Of 1p***81 Assem.) | 2 |
121-8917 Pump Gp-Transmission -1-Section Gear
| 12***83 | Gear-Drive; (68-Teeth) | 1 |
| 12***17 | Pump Group-Transmission; -1-Section Gear | 1 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
117-7837 Rim Ar -3-Piece
| 11***37 | Rim Ar; -3-Piece | 1 |
| 11***40 | Rim Group-Demountable; -3-Piece | 4 |
| 14***71 | Mounting Group-Rim | 1 |
117-7836 Rim Ar -1-Piece
| 11***36 | Rim Ar; -1-Piece | 1 |
| 11***39 | Rim Group-Demountable; -1-Piece | 4 |
| 14***71 | Mounting Group-Rim | 1 |
146-6783 Rim Ar -3-Piece
| 14***83 | Rim Ar; -3-Piece | 1 |
| 14***71 | Mounting Group-Rim | 1 |
| 2Q***79 | Rim Group-Demountable | 4 |
154-5508 Rim Ar -3-Piece, Center Mount
| 14***71 | Mounting Group-Rim | 1 |
| 14***84 | Stop Group-Axle Oscillation | 1 |
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
117-7840 Rim Gp-Demountable -3-Piece
| 11***40 | Rim Group-Demountable; -3-Piece | 1 |
| 18***42 | Rim Group-Demountable | 1 |
| 4K***79 | Seal-O-Ring | 1 |
117-7839 Rim Gp-Demountable -1-Piece
| 11***39 | Rim Group-Demountable; -1-Piece | 1 |
| 2D***07 | Stud | 1 |
| 2D***08 | Grommmet | 1 |
186-4942 Rim Gp-Demountable
| 12***36 | Rim Group-Demountable; -3-Piece | 1 |
| 17***05 | Rim Group-Demountable; -3-Piece | 1 |
| 18***42 | Rim Group-Demountable | 1 |
2q-5979 Rim Gp-Demountable
| 18***43 | Rim Group-Demountable; -3-Piece | 1 |
| 2Q***79 | Rim Group-Demountable | 1 |
| 4K***79 | Seal-O-Ring | 1 |
186-4943 Rim Gp-Demountable -3-Piece
| 17***06 | Rim Group-Demountable; -3-Piece | 1 |
| 18***43 | Rim Group-Demountable; -3-Piece | 1 |
| 2Q***80 | Rim Group-Demountable; -3-Piece | 1 |
2q-5980 Rim Gp-Demountable -3-Piece
| 2Q***80 | Rim Group-Demountable; -3-Piece | 1 |
| 4K***81 | Ring-Lock; (Lock) | 1 |
| 8Q***33 | Rim As | 1 |
176-1705 Rim Gp-Demountable -3-Piece
| 17***98 | Flange As | 1 |
| 17***99 | Rim As | 1 |
| 17***18 | Driver | 1 |
128-5436 Rim Gp-Demountable -3-Piece
| 10***31 | Rim As | 1 |
| 12***36 | Rim Group-Demountable; -3-Piece | 1 |
| 4K***81 | Ring-Lock; (Lock) | 1 |
176-1706 Rim Gp-Demountable -3-Piece
| 17***89 | Flange As | 1 |
| 17***18 | Driver | 1 |
| 17***06 | Rim Group-Demountable; -3-Piece | 1 |
132-2474 Shaft Gp-Drive
| 02***08 | Screw; (3/8-24) | 1 |
| 11***40 | Kit-Spider & Bearing | 1 |
| 13***74 | Shaft Group-Drive | 1 |
132-2462 Shaft Gp-Drive
| 11***39 | Kit-Spider & Bearing | 1 |
| 13***62 | Shaft Group-Drive | 1 |
| 13***63 | Slip Joint Group | 1 |
132-2463 Slip Joint Gp
| 11***40 | Kit-Spider & Bearing | 2 |
| 13***63 | Slip Joint Group | 1 |
| 1K***53 | Fitting (Pressure Relief) | 1 |
147-5576 Stop Gp-Axle Oscillation
| 14***76 | Stop Group-Axle Oscillation | 1 |
| 14***77 | Block | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 4 |
147-5484 Stop Gp-Axle Oscillation
| 14***84 | Stop Group-Axle Oscillation | 1 |
| 4E***57 | Block; (Oscillation Limiter) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 4 |
117-7848 Tire & Rim Ar
| 10***35 | Tire; (17.5-R25) | 4 |
| 11***36 | Rim Ar; -1-Piece | 1 |
| 11***48 | Tire & Rim Ar | 1 |
190-8996 Tire & Rim Ar
| 14***83 | Rim Ar; -3-Piece | 1 |
| 14***84 | Stop Group-Axle Oscillation | 1 |
| 19***95 | Tire; (550/65-R25) | 4 |
171-1138 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 17***38 | Tire & Rim Ar | 1 |
| 6W***07 | Tire; (17.5-25) | 4 |
117-7861 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 11***61 | Tire & Rim Ar | 1 |
| 6C***46 | Tire; (17.5-R25) | 4 |
147-5575 Tire & Rim Ar
| 14***83 | Rim Ar; -3-Piece | 1 |
| 14***75 | Tire & Rim Ar | 1 |
| 14***76 | Stop Group-Axle Oscillation | 1 |
190-8987 Tire & Rim Ar
| 15***08 | Rim Ar; -3-Piece, Center Mount | 1 |
| 19***85 | Tire; (20.5-R25) | 4 |
| 19***87 | Tire & Rim Ar | 1 |
128-5438 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 12***38 | Tire & Rim Ar | 1 |
| 12***50 | Tire-Tubeless; (17.5-25) | 4 |
147-5572 Tire & Rim Ar
| 12***67 | Tire; (20.5-25) | 4 |
| 14***83 | Rim Ar; -3-Piece | 1 |
| 14***72 | Tire & Rim Ar | 1 |
117-7862 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 11***62 | Tire & Rim Ar | 1 |
| 6C***66 | Tire; (17.5 R25*L-2) | 4 |
147-5483 Tire & Rim Ar
| 14***83 | Rim Ar; -3-Piece | 1 |
| 14***83 | Tire & Rim Ar | 1 |
| 14***84 | Stop Group-Axle Oscillation | 1 |
171-1137 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 17***37 | Tire & Rim Ar | 1 |
| 6K***56 | Tire; (17.5-25) | 4 |
190-8993 Tire & Rim Ar
| 14***83 | Rim Ar; -3-Piece | 1 |
| 14***84 | Stop Group-Axle Oscillation | 1 |
| 19***92 | Tire; (550/65-R25) | 4 |
147-5573 Tire & Rim Ar
| 10***37 | Tire; (20.5 R25*L-2) | 4 |
| 14***83 | Rim Ar; -3-Piece | 1 |
| 14***73 | Tire & Rim Ar | 1 |
147-5574 Tire & Rim Ar
| 14***83 | Rim Ar; -3-Piece | 1 |
| 14***74 | Tire & Rim Ar | 1 |
| 14***76 | Stop Group-Axle Oscillation | 1 |
128-5440 Tire & Rim Ar
| 11***37 | Rim Ar; -3-Piece | 1 |
| 12***40 | Tire & Rim Ar | 1 |
| 12***50 | Tire-Tubeless; (17.5-25) | 4 |
117-7851 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 11***51 | Tire & Rim Ar | 1 |
| 6C***66 | Tire; (17.5 R25*L-2) | 4 |
117-7849 Tire & Rim Ar
| 11***36 | Rim Ar; -1-Piece | 1 |
| 11***49 | Tire & Rim Ar | 1 |
| 6C***46 | Tire; (17.5-R25) | 4 |
147-5571 Tire & Rim Ar
| 12***64 | Tire-Tubeless; (20.5-25) | 4 |
| 14***83 | Rim Ar; -3-Piece | 1 |
| 14***71 | Tire & Rim Ar | 1 |
173-3080 Tire & Rim Ar
| 13***97 | Tire-Tubeless; (20.5-25) | 4 |
| 14***83 | Rim Ar; -3-Piece | 1 |
| 14***76 | Stop Group-Axle Oscillation | 1 |
117-7860 Tire & Rim Ar
| 10***35 | Tire; (17.5-R25) | 4 |
| 11***37 | Rim Ar; -3-Piece | 1 |
| 11***60 | Tire & Rim Ar | 1 |
140-2772 Transmission Ar-Power Shift
| 10***40 | Clutch Group; (No.1 And No.3) | 1 |
| 10***48 | Clutch Group; (Reverse And No.2) | 1 |
| 12***17 | Pump Group-Transmission; -1-Section Gear | 1 |
8e-5523 Valve Gp-Dump
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
6i-9806 Valve Gp-Relief -Torque Converter Outlet
| 2L***26 | Ring-Retaining | 1 |
| 2S***82 | Spring | 1 |
| 6I***04 | Spool | 1 |
148-2217 Valve Gp-Selector & Press Cont -Transmission
| 12***98 | Spring | 1 |
| 13***79 | Valve Group-Solenoid; -Clutch | 6 |
| 14***17 | Valve Group-Selector & Press Cont; -Transmission | 1 |
148-2218 Valve Gp-Transmission Control
| 14***67 | Poppet | 1 |
| 14***17 | Valve Group-Selector & Press Cont; -Transmission | 1 |
| 14***18 | Valve Group-Transmission Control | 1 |
Service Equipment And Supplies
9g-9288 Cap Gp-Protection
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 2J***61 | Ring-Retaining | 1 |
| 5D***11 | Cover-Hydraulic Cap | 1 |
156-0182 Box Gp-Tool
| 15***39 | Channel | 1 |
| 15***40 | Box As-Tool | 1 |
| 15***82 | Box Group-Tool | 1 |
173-9420 Film Gp
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 0 |
| 13***72 | Film-Identification; (Cat) | 2 |
| 17***20 | Film Group | 1 |
197-7700 Film Gp
| 10***96 | Film-Waste Handler | 2 |
| 19***00 | Film Group | 1 |
173-9421 Film Gp
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 0 |
| 13***72 | Film-Identification; (Cat) | 2 |
| 17***21 | Film Group | 1 |
167-0048 Plate & Film Gp
| 12***31 | Film-Warning; (Start Aid, Read Omm) | 1 |
| 12***55 | Film-Emission | 1 |
| 13***25 | Film-Notice; (No Kerosene) | 1 |
216-4262 Plate & Film Gp
| 11***28 | Film | 1 |
| 18***68 | Film | 2 |
| 20***51 | Manifold, Plate & Film Group | 1 |
166-7116 Plate & Film Gp
| 12***49 | Film-Warning; (Universal)(Starting Procedure) | 1 |
| 12***43 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***47 | Film-Warning; (Cable Connection) | 2 |
166-7124 Plate & Film Gp
| 13***49 | Film-Warning; (Radiator Pressure) | 1 |
| 13***52 | Film-Warning | 1 |
| 15***93 | Film-Warning; (Cable Connection) | 2 |
166-7125 Plate & Film Gp
| 10***16 | Plate-Warning; (Steering Frame Lock) | 2 |
| 12***30 | Film-Warning; (Universal) | 1 |
| 13***90 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
166-7117 Plate & Film Gp
| 12***41 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 12***50 | Film-Warning; (Universal) | 1 |
| 14***48 | Film-Warning; (Jump Start, Read Omm) | 2 |
166-7119 Plate & Film Gp
| 12***42 | Film-Warning; (Universal) | 1 |
| 12***46 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***50 | Film-Warning; (Cable Connection) | 2 |
220-2058 Plate & Film Gp
| 12***31 | Film-Warning; (Start Aid, Read Omm) | 1 |
| 12***55 | Film-Emission | 1 |
| 12***20 | Plate-Certification | 1 |
166-7120 Plate & Film Gp
| 12***43 | Film-Warning; (Universal) | 1 |
| 12***45 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***51 | Film-Warning; (Cable Connection) | 2 |
166-7121 Plate & Film Gp
| 12***44 | Film-Warning; (Universal)(Quick Coupler, Radio, Ether) | 1 |
| 12***44 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***52 | Film-Warning; (Cable Connection) | 2 |
166-7118 Plate & Film Gp
| 12***46 | Film-Warning; (Universal)(Quick Coupler, Radio, Ether) | 1 |
| 12***42 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***49 | Film-Warning; (Cable Connection) | 2 |
216-4263 Plate & Film Gp
| 10***09 | Film; (Environmental Decal)(Both Sides Under 966f Ii Film) | 2 |
| 20***51 | Manifold, Plate & Film Group | 1 |
| 21***63 | Plate & Film Group | 1 |
173-0619 Plate & Film Gp
| 10***30 | Film; (Warning) (Accumulator Pressure) (On Bracket Covering Brake Accumulator) | 2 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 17***19 | Plate & Film Group | 1 |
166-7126 Plate & Film Gp
| 10***17 | Plate-Warning; (No Clearance) | 2 |
| 13***48 | Film-Warning; (Radiator Pressure) | 1 |
| 15***67 | Film-Warning; (Cable Connection) | 2 |
166-7127 Plate & Film Gp
| 10***30 | Film; (Warning) (Accumulator Pressure) (On Bracket Covering Brake Accumulator) | 2 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 16***27 | Plate & Film Group | 1 |
166-7122 Plate & Film Gp
| 12***45 | Film-Warning; (Universal)(Quick Coupler, Radio, Ether) | 1 |
| 13***88 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***53 | Film-Warning; (Cable Connection) | 2 |
156-4273 Plate & Film Gp
| 12***40 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 12***48 | Film-Warning; (Universal)(Starting Procedure) | 1 |
| 14***46 | Film-Warning; (Cable Connection) | 2 |
156-4272 Plate & Film Gp
| 12***39 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 12***47 | Film-Warning; (Universal)(Quick Coupler, Radio, Ether) | 1 |
| 14***45 | Film-Warning; (Cable Connection) | 2 |
156-3901 Plate & Film Gp
| 11***25 | Film-Warning; (Universal) | 1 |
| 12***06 | Film-Warning; (Next To Radiator Fill Cap) | 1 |
| 14***23 | Film-Warning; (Cable Connection) | 2 |
166-7123 Plate & Film Gp
| 10***76 | Plate-Warning; (No Clearance) | 2 |
| 12***51 | Film-Warning; (Universal)(Quick Coupler, Radio, Ether) | 1 |
| 13***91 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
Steering System
132-2550 Cylinder & Mtg Gp-Steering
| 13***50 | Cylinder & Mtg Group-Steering | 1 |
| 13***53 | Pin | 2 |
| 13***54 | Pin As | 2 |
142-6251 Cylinder Gp-Steering
| 14***51 | Cylinder Group-Steering | 1 |
| 14***52 | Cylinder As | 1 |
| 14***55 | Rod As | 1 |
146-7901 Lines Gp-Secondary Steering
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 3 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***11 | Tee-O-Ring Port | 1 |
146-7902 Lines Gp-Steering
| 14***02 | Lines Group-Steering | 1 |
| 14***06 | Hose As | 1 |
| 14***08 | Hose As | 1 |
123-8915 Pump & Motor Gp -Secondary Steering
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 12***14 | Pump; (Secondary Steering) | 1 |
| 12***15 | Pump & Motor Group; -Engine Prelubrication | 1 |
146-7903 Pump & Mtg Gp-Secondary Steer
| 12***15 | Pump & Motor Group; -Engine Prelubrication | 1 |
| 14***03 | Pump & Mtg Group-Secondary Steer | 1 |
| 14***15 | Plate As | 1 |
159-4548 Pump Gp-Metering
| 09***66 | Bolt; (M8x1.25x75-mm) | 7 |
| 11***06 | Plug | 2 |
| 11***08 | Spring | 2 |
8q-4715 Pump Gp-Metering
| 15***63 | Pump Group-Metering; -Hmu | 1 |
| 8Q***15 | Pump Group-Metering | 1 |
158-7662 Pump Gp-Metering -Hmu
| 10***04 | Seal | 1 |
| 11***80 | Cap | 1 |
| 11***90 | Spacer; (23.8x55.9x4-mm Thk) | 1 |
158-7663 Pump Gp-Metering -Hmu
| 12***40 | Metering Pump Group; (Hmu) | 1 |
| 15***62 | Pump Group-Metering; -Hmu | 1 |
| 15***63 | Pump Group-Metering; -Hmu | 1 |
146-7900 Steering Ar-Secondary
| 13***76 | Wiring Group-Secondary Steering | 1 |
| 14***00 | Steering Ar-Secondary | 1 |
| 14***01 | Lines Group-Secondary Steering | 1 |
189-0941 Steering Ar-Secondary
| 14***00 | Steering Ar-Secondary | 1 |
| 18***41 | Steering Ar-Secondary | 1 |
204-7147 Steering Column Gp -Tilt
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 20***47 | Steering Column Group; -Tilt | 1 |
| 21***54 | Spring As-Gas; (Steering Column Tilt) | 1 |
Work Tools
116-9713 Adapter Gp-Tip
| 11***13 | Adapter Group-Tip | 1 |
| 1U***57 | Adapter-Strap | 6 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 4 |
9v-1795 Arm Gp-Material Handling
| 1K***70 | Nut (National Coarse) | 1 |
| 5G***73 | Pin | 2 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 2 |
231-1494 Bucket Ar-General Purpose
| 17***61 | Bucket Group-General Purpose | 1 |
| 23***94 | Bucket Ar | 1 |
| 8E***66 | Edge Group-Cutting | 1 |
231-1495 Bucket Ar-General Purpose
| 17***68 | Bucket As-General Purpose | 1 |
| 23***95 | Bucket Ar | 1 |
| 8E***66 | Edge Group-Cutting | 1 |
231-1492 Bucket Ar-General Purpose
| 16***63 | Bucket Group-General Purpose | 1 |
| 23***92 | Bucket Ar-General Purpose | 1 |
| 8E***66 | Edge Group-Cutting | 1 |
231-1490 Bucket Ar-General Purpose
| 16***65 | Bucket Group-General Purpose; -Quick Coupler | 1 |
| 23***90 | Bucket Ar-General Purpose | 1 |
| 8E***66 | Edge Group-Cutting | 1 |
231-1491 Bucket Ar-General Purpose
| 17***63 | Bucket Group-General Purpose; -Quick Coupler | 1 |
| 23***91 | Bucket Ar-General Purpose | 1 |
| 8E***66 | Edge Group-Cutting | 1 |
231-1496 Bucket Ar-General Purpose
| 17***35 | Bucket As-General Purpose | 1 |
| 23***96 | Bucket Ar-General Purpose | 1 |
| 8E***66 | Edge Group-Cutting | 1 |
231-1463 Bucket Ar-General Purpose
| 16***66 | Bucket Group-General Purpose; -Quick Coupler | 1 |
| 23***63 | Bucket Ar-General Purpose | 1 |
| 8E***66 | Edge Group-Cutting | 1 |
231-1493 Bucket Ar-General Purpose
| 16***62 | Bucket Group-General Purpose | 1 |
| 23***93 | Bucket Ar-General Purpose | 1 |
| 8E***66 | Edge Group-Cutting | 1 |
180-9335 Bucket Ar-Multipurpose
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 18***35 | Bucket Ar-Multipurpose; -Hook-On | 1 |
| 18***36 | Lines Group-Connecting | 1 |
183-4735 Bucket Ar-Multipurpose
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 18***38 | Cylinder Group-Bucket | 2 |
| 18***60 | Pin As | 2 |
279-1603 Bucket As-General Purpose
| 27***03 | Bucket As-General Purpose | 1 |
| 27***04 | Bucket As-General Purpose | 1 |
173-3632 Bucket As-General Purpose
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***70 | Bucket As-General Purpose | 1 |
| 16***89 | Tack-Fastener | 4 |
173-3635 Bucket As-General Purpose
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 16***72 | Bucket As-General Purpose | 1 |
279-1630 Bucket As-General Purpose
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 11***58 | Plate | 1 |
| 14***53 | Edge-Cutting | 1 |
147-7331 Bucket As-General Purpose
| 14***31 | Bucket As-General Purpose | 1 |
| 15***14 | Hinge As; (Center, Rh) | 1 |
| 15***15 | Hinge As; (Center, Lh)(Lh Center) | 1 |
173-3634 Bucket As-General Purpose
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***31 | Bucket As-General Purpose | 1 |
| 16***89 | Tack-Fastener | 4 |
145-5165 Bucket As-General Purpose
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 11***58 | Plate | 1 |
| 14***65 | Bucket As-General Purpose; -Quick Coupler | 1 |
193-0549 Bucket As-General Purpose
| 11***58 | Plate | 1 |
| 14***96 | Plate As; (Rh) | 1 |
| 14***97 | Plate As; (Lh) | 1 |
172-8568 Bucket As-General Purpose
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 14***31 | Bucket As-General Purpose | 1 |
| 16***89 | Tack-Fastener | 4 |
173-3633 Bucket As-General Purpose -Quick Coupler
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***71 | Bucket As-General Purpose | 1 |
| 16***89 | Tack-Fastener | 4 |
167-3971 Bucket As-General Purpose
| 11***58 | Plate | 1 |
| 14***53 | Edge-Cutting | 1 |
| 16***60 | Plate | 2 |
145-5166 Bucket As-General Purpose -Quick Coupler
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 11***58 | Plate | 1 |
| 14***66 | Bucket As-General Purpose; -Quick Coupler | 1 |
169-4872 Bucket As-General Purpose
| 11***58 | Plate | 1 |
| 15***14 | Hinge As; (Center, Rh) | 1 |
| 15***15 | Hinge As; (Center, Lh)(Lh Center) | 1 |
283-0509 Bucket As-General Purpose -Quick Coupler
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***09 | Air Fuel Control Tube, Bucket As-General Purpose; -Quick Coupler | 1 |
279-1629 Bucket As-General Purpose
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***29 | Bucket As-General Purpose | 1 |
283-0510 Bucket As-General Purpose
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 11***58 | Plate | 1 |
| 14***53 | Edge-Cutting | 1 |
168-7831 Bucket As-General Purpose
| 11***58 | Plate | 1 |
| 14***53 | Edge-Cutting | 1 |
| 15***14 | Hinge As; (Center, Rh) | 1 |
172-8559 Bucket As-General Purpose -Quick Coupler
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 14***66 | Bucket As-General Purpose; -Quick Coupler | 1 |
| 16***89 | Tack-Fastener | 4 |
145-5163 Bucket As-General Purpose
| 14***63 | Bucket As-General Purpose | 1 |
| 14***01 | Hinge As; (Tilt, Rh)(Rh Inner) | 1 |
| 14***02 | Hinge As; (Tilt, Lh)(Lh Inner) | 1 |
167-3970 Bucket As-General Purpose
| 11***58 | Plate | 1 |
| 14***53 | Edge-Cutting | 1 |
| 14***01 | Hinge As; (Tilt, Rh)(Rh Inner) | 1 |
172-8563 Bucket As-General Purpose
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 14***63 | Bucket As-General Purpose | 1 |
| 16***89 | Tack-Fastener | 4 |
172-8558 Bucket As-General Purpose -Quick Coupler
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 14***65 | Bucket As-General Purpose; -Quick Coupler | 1 |
| 16***89 | Tack-Fastener | 4 |
279-1604 Bucket As-General Purpose
| 14***53 | Edge-Cutting | 1 |
| 16***61 | Plate | 2 |
| 16***51 | Plate | 2 |
199-6151 Bucket As-Penetration
| 11***58 | Plate | 1 |
| 14***20 | Plate-Wear | 1 |
| 14***21 | Plate-Wear | 4 |
215-6954 Bucket As-Penetration
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***53 | Bucket As-Penetration | 1 |
145-5164 Bucket As-Penetration
| 11***58 | Plate | 1 |
| 14***64 | Bucket As-Penetration | 1 |
| 14***01 | Hinge As; (Tilt, Rh)(Rh Inner) | 1 |
198-8557 Bucket As-Penetration -Quick Coupler
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 19***57 | Bucket As-Penetration; -Quick Coupler | 1 |
215-6953 Bucket As-Penetration
| 09***36 | Boss; (M10x1.5-Thd) | 2 |
| 11***58 | Plate | 1 |
| 14***01 | Hinge As; (Tilt, Rh)(Rh Inner) | 1 |
172-8556 Bucket As-Penetration
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 14***64 | Bucket As-Penetration | 1 |
| 16***89 | Tack-Fastener | 4 |
172-8560 Bucket As-Penetration -Quick Coupler
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 14***67 | Bucket As-Penetration | 1 |
| 16***89 | Tack-Fastener | 4 |
199-5212 Bucket As-Penetration
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 19***12 | Bucket As-Penetration | 1 |
145-5167 Bucket As-Penetration
| 11***58 | Plate | 1 |
| 14***67 | Bucket As-Penetration | 1 |
| 14***20 | Plate-Wear | 1 |
198-8558 Bucket As-Penetration
| 11***58 | Plate | 1 |
| 14***20 | Plate-Wear | 1 |
| 14***21 | Plate-Wear | 4 |
279-2265 Bucket Gp-General Purpose -Quick Coupler
| 14***73 | Plate As | 1 |
| 27***65 | Bucket Group-General Purpose; -Quick Coupler | 1 |
| 28***09 | Air Fuel Control Tube, Bucket As-General Purpose; -Quick Coupler | 1 |
215-6955 Bucket Gp-General Purpose
| 14***73 | Plate As | 1 |
| 14***00 | Mounting Group-Bucket | 1 |
| 21***54 | Bucket As-Penetration | 1 |
178-4663 Bucket Gp-General Purpose -Quick Coupler
| 11***58 | Plate | 1 |
| 14***73 | Plate As | 1 |
| 16***90 | Plate | 4 |
183-4484 Bucket Gp-General Purpose
| 11***58 | Plate | 1 |
| 14***20 | Plate-Wear | 1 |
| 14***21 | Plate-Wear | 4 |
193-0395 Bucket Gp-General Purpose
| 16***89 | Tack-Fastener | 4 |
| 19***95 | Bucket Group-General Purpose | 1 |
| 19***49 | Bucket As-General Purpose | 1 |
279-1628 Bucket Gp-General Purpose
| 14***73 | Plate As | 1 |
| 14***00 | Mounting Group-Bucket | 1 |
| 27***28 | Bucket Group-General Purpose | 1 |
167-3966 Bucket Gp-General Purpose -Quick Coupler
| 14***73 | Plate As | 1 |
| 16***66 | Bucket Group-General Purpose; -Quick Coupler | 1 |
| 17***59 | Bucket As-General Purpose; -Quick Coupler | 1 |
167-3969 Bucket Gp-General Purpose -Quick Coupler
| 14***73 | Plate As | 1 |
| 16***69 | Bucket Group-General Purpose; -Quick Coupler | 1 |
| 17***33 | Bucket As-General Purpose; -Quick Coupler | 1 |
178-4661 Bucket Gp-General Purpose
| 11***58 | Plate | 1 |
| 14***73 | Plate As | 1 |
| 14***01 | Hinge As; (Tilt, Rh)(Rh Inner) | 1 |
167-3963 Bucket Gp-General Purpose
| 14***73 | Plate As | 1 |
| 14***00 | Mounting Group-Bucket | 1 |
| 16***63 | Bucket Group-General Purpose | 1 |
167-3965 Bucket Gp-General Purpose -Quick Coupler
| 14***73 | Plate As | 1 |
| 16***65 | Bucket Group-General Purpose; -Quick Coupler | 1 |
| 17***58 | Bucket As-General Purpose; -Quick Coupler | 1 |
167-3968 Bucket Gp-General Purpose
| 14***73 | Plate As | 1 |
| 14***00 | Mounting Group-Bucket | 1 |
| 16***68 | Bucket Group-General Purpose | 1 |
167-3962 Bucket Gp-General Purpose
| 11***58 | Plate | 1 |
| 14***73 | Plate As | 1 |
| 14***01 | Hinge As; (Tilt, Rh)(Rh Inner) | 1 |
198-8556 Bucket Gp-General Purpose
| 14***73 | Plate As | 1 |
| 19***56 | Bucket Group-General Purpose | 1 |
| 19***57 | Bucket As-Penetration; -Quick Coupler | 1 |
167-3967 Bucket Gp-Penetration -Quick Coupler
| 14***73 | Plate As | 1 |
| 16***67 | Bucket Group-Penetration; -Quick Coupler | 1 |
| 17***60 | Bucket As-Penetration; -Quick Coupler | 1 |
167-3964 Bucket Gp-Penetration
| 14***73 | Plate As | 1 |
| 14***00 | Mounting Group-Bucket | 1 |
| 16***64 | Bucket Group-Penetration | 1 |
132-2443 Carriage As-Fork
| 13***43 | Carriage As-Fork | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
203-6465 Conversion Ar-Quick Coupler -Kit
| 15***24 | Lines Group-Coupler | 1 |
| 17***01 | Coupler Group-Quick; -Wide Frame | 1 |
| 17***20 | Cylinder & Mtg Group-Coupler; -Wide | 1 |
203-6464 Conversion Ar-Quick Coupler -Kit
| 13***01 | Coupler Group-Quick | 1 |
| 14***60 | Lines Group-Coupler | 1 |
| 14***27 | Cylinder & Mtg Group-Coupler | 1 |
176-0700 Coupler Ar-Quick
| 15***24 | Lines Group-Coupler | 1 |
| 17***00 | Coupler Ar-Quick | 1 |
| 17***01 | Coupler Group-Quick; -Wide Frame | 1 |
176-7610 Coupler Ar-Quick
| 13***01 | Coupler Group-Quick | 1 |
| 14***55 | Hose As | 1 |
| 14***57 | Hose As | 1 |
191-0962 Coupler Ar-Quick
| 15***24 | Lines Group-Coupler | 1 |
| 17***01 | Coupler Group-Quick; -Wide Frame | 1 |
| 17***20 | Cylinder & Mtg Group-Coupler; -Wide | 1 |
132-2448 Coupler Ar-Quick
| 13***01 | Coupler Group-Quick | 1 |
| 13***48 | Coupler Ar-Quick | 1 |
| 14***27 | Cylinder & Mtg Group-Coupler | 1 |
176-0710 Coupler Ar-Quick
| 16***85 | Lines Group-Coupler | 1 |
| 17***01 | Coupler Group-Quick; -Wide Frame | 1 |
| 17***10 | Coupler Ar-Quick | 1 |
132-2400 Coupler Ar-Quick
| 13***00 | Coupler Ar-Quick | 1 |
| 13***01 | Coupler Group-Quick | 1 |
| 14***60 | Lines Group-Coupler | 1 |
191-0961 Coupler Ar-Quick
| 13***01 | Coupler Group-Quick | 1 |
| 14***60 | Lines Group-Coupler | 1 |
| 14***27 | Cylinder & Mtg Group-Coupler | 1 |
176-7611 Coupler Ar-Quick
| 14***51 | Elbow Group | 1 |
| 14***68 | Elbow Group | 1 |
| 15***50 | Elbow As | 1 |
176-0701 Coupler Gp-Quick -Wide Frame
| 13***19 | Pin As | 2 |
| 13***27 | Pin As | 1 |
| 14***77 | Plate-Instruction; (Quick Coupler, Read Omm) | 1 |
132-2401 Coupler Gp-Quick
| 13***01 | Coupler Group-Quick | 1 |
| 13***19 | Pin As | 2 |
| 13***27 | Pin As | 1 |
8e-4566 Edge Gp-Cutting
| 1J***07 | Bolt 6.99cm (2.75 In.) Long | 10 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 10 |
| 4T***91 | End Bit; (End) | 2 |
8e-4568 Edge Gp-Segment
| 1J***07 | Bolt 6.99cm (2.75 In.) Long | 14 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 14 |
| 8E***68 | Edge Group-Segment | 1 |
6w-8900 Fork Gp-Pallet
| 09***37 | Service Group-Fork Positioner | 1 |
| 09***45 | Washer; (16.6x24x1.2-mm Thk) | 1 |
| 6W***00 | Fork Group | 1 |
6w-9739 Fork Gp-Pallet
| 09***37 | Service Group-Fork Positioner | 1 |
| 09***45 | Washer; (16.6x24x1.2-mm Thk) | 1 |
| 6W***39 | Fork Group | 1 |
6w-8935 Fork Gp-Pallet
| 09***37 | Service Group-Fork Positioner | 1 |
| 09***45 | Washer; (16.6x24x1.2-mm Thk) | 1 |
| 6W***35 | Fork Group | 1 |
133-9369 Fork Gp-Pallet
| 13***69 | Fork Group-Pallet | 1 |
| 19***35 | Fork Group-Pallet; -Rh | 2 |
195-6939 Fork Gp-Pallet
| 19***39 | Fork Group-Pallet | 1 |
| 19***40 | Positioner Group-Fork | 1 |
| 19***61 | Insert | 1 |
195-6935 Fork Gp-Pallet
| 19***35 | Fork Group-Pallet; -Rh | 1 |
| 19***61 | Insert | 1 |
| 22***24 | Positioner Group-Work Tool; (Fork) | 1 |
133-9368 Fork Gp-Pallet
| 13***68 | Fork Group-Pallet | 1 |
| 19***37 | Fork Group-Pallet | 2 |
195-6937 Fork Gp-Pallet
| 19***37 | Fork Group-Pallet | 1 |
| 19***61 | Insert | 1 |
| 22***24 | Positioner Group-Work Tool; (Fork) | 1 |
189-5836 Guard Gp-Overflow
| 16***98 | Guard Group-Overflow; -Bucket | 1 |
| 18***36 | Guard Group-Overflow | 1 |
165-0198 Guard Gp-Overflow -Bucket
| 14***73 | Plate As | 1 |
| 16***98 | Guard Group-Overflow; -Bucket | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 6 |
217-3622 Guard Gp-Overflow -Bucket
| 20***32 | Plate As | 1 |
| 21***22 | Guard Group-Overflow; -Bucket | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 6 |
148-7900 Mounting Gp-Bucket
| 14***86 | Shim; (3.18-mm Thk) | 2 |
| 14***87 | Shim; (6.35-mm Thk) | 2 |
| 14***03 | Pin As | 2 |
178-0470 Protector Gp-Linkage
| 14***03 | Pin As | 2 |
| 14***06 | Pin As, Seal | 1 |
| 17***65 | Support As | 1 |
9w-8142 Tip Gp-Long
| 9J***69 | Tip Group-Long; -J-250 | 8 |
| 9W***42 | Tip Group-Long | 1 |
9j-3169 Tip Gp-Long
| 13***63 | Pin-G.E.T. | 1 |
| 14***33 | Retainer As; (G.E.T.) | 1 |
| 1U***52 | Tip (Long) | 1 |
9w-8143 Tip Gp-Short
| 9J***78 | Tip Group-Short; -J-250 | 8 |
| 9W***43 | Tip Group-Short | 1 |
9j-3178 Tip Gp-Short
| 13***63 | Pin-G.E.T. | 1 |
| 14***33 | Retainer As; (G.E.T.) | 1 |
| 1U***51 | Tip (Short) | 1 |
924G serial number reference
The PIN/serial plate on a 924G is stamped on the machine frame on the left side (as seen from the operator seat, facing forward/highway orientation), ahead of the cab near the left front tire; it can be covered in paint so look closely or wipe the area down. On pre-2001 builds the plate shows an 8-character serial (3-letter prefix plus 5-digit sequence, e.g. DDA01039); on 2001-and-later machines the full 17-character PIN embeds the same 3-letter prefix and 5-digit sequence near the end of the string, following the model code segment.
| Prefix | Identifies | Notes |
|---|---|---|
| DDA | 924G wheel loader, Cat 3056E DIT ATAAC engine, roughly 2003-2005 production | Best-documented 924G prefix, spanning roughly DDA00462 (2003) through DDA01039 (2004) and DDA01908 (2005). |
| WMB | 924G wheel loader, Cat 3056E DIT ATAAC engine | A dealer-sold 924G was documented at WMB00613. Sources disagree on the exact build year (catalog data points near 2001, one dealer sale record ties it to 2004); treat as approximate and confirm the exact year with your dealer. Parts and service literature covers WMB00001 and up. |
| 9SW | 924G wheel loader, Cat 3056E DIT ATAAC engine, late-1990s to early-2000s production | 924G units at this prefix are documented from about 1999 into the early 2000s; sources disagree on the exact year, so treat as approximate. This prefix also matches the generic 17-character PIN layout example commonly used to illustrate this model's serial format. |
| 3PZ | 924G wheel loader, Cat 3056E DIT ATAAC engine | Tied to 924G serial 3PZ01147. Exact production years not pinned down for this range; confirm with your dealer. |
| 6YW | 924G wheel loader, Cat 3056E DIT ATAAC engine | A 924G unit referenced at serial 6YW00246. Parts and service literature covers 6YW00001 through about 6YW00946. Exact production years not independently confirmed. |
| RBB | 924G wheel loader, Brazil-built production block | Narrow serial block (RBB01034 through RBB01037) tied to Brazil-built 924G production. Limited run size suggests a regional or short production batch; confirm exact dates with your dealer. |
| AAN | 924G wheel loader, early production block | A parts catalog lists AAN under the 924G model heading specifically (early production), separate from the 924Gz heading. Some resale manual titles bundle 924G and 924Gz together for this prefix, and no individual machine sale listing independently confirms the split; confirm with dealer before relying on it. |
| EEB | 924G wheel loader, later production block | A parts catalog lists EEB under the 924G model heading specifically (later production), separate from the 924Gz heading. Aftermarket seal-kit fitment listings and some resale manual titles bundle it with the 924Gz instead, and no independent machine sale listing was found; confirm with dealer. |
| 3DZ | 924G wheel loader, early production block, powered by the 3056-family engine | Parts and service literature lists 3DZ00001 through roughly 3DZ01048 under the 924G heading, separate from 924Gz. Some documentation bundles 924G and 924Gz together for this prefix, and at least one resold unit was tagged 924Gz. Treat as primarily 924G and confirm the exact machine with your dealer before ordering parts. |
Frequently asked questions
What engine does the Caterpillar 924G use?
The 924G is powered by the Caterpillar 3056E DIT ATAAC, a turbocharged and air-to-air aftercooled diesel meeting Tier 2 emissions. Rated net power is cited between roughly 96 kW (129 hp) and 102 kW (137 hp) depending on the production period and rating standard referenced, so confirm the exact figure against the rating plate for your serial prefix.
What is the operating weight of the Caterpillar 924G?
Operating weight falls in a roughly 10,900-11,600 kg (24,000-25,600 lb) range, with a frequently cited reference weight near 11,340 kg (24,990 lb). The exact figure depends on whether the machine carries standard or High Lift VersaLink linkage and a pin-on or quick-coupler front end.
What replaced the Caterpillar 924G?
The Caterpillar 924H replaced the 924G when Cat's H-series small wheel loaders arrived around 2008. The 924G itself succeeded the 924F, putting it in the middle of that loader line's late-1990s-to-2010s generational progression.
What 924G owners discuss
What hydraulic behavior do 924G owners commonly report with the loader lift circuit?
Some owners report the loader arms briefly lose lift power while filling the bucket, as if a valve dumps oil out of the lift circuit; returning the joystick to neutral and re-engaging usually restores normal lift. Reported causes include worn O-rings in the resolver valves under the lift and tilt valve caps, and a clogged screen filter in the pilot supply line to the body valve. A gradual worsening of lift speed over a work shift points to the screen filter; a sudden, intermittent drop points to the resolvers. Check pilot filters and resolver seals before condemning the main control valve. Because sudden lift loss with a raised load is a safety concern, have your dealer verify the hydraulic diagnosis before returning the machine to service.
Are there known powershift transmission quirks on the 924G?
Two symptoms come up repeatedly: a shift that hesitates or drops into a false neutral before catching, and, in worse cases, a transmission that needs to sit and cool for roughly 15 minutes before it will move again. Troubleshooting on Cat powershift boxes of this type generally starts with the shift linkage and solenoids, then pump suction line gaskets and control valve O-rings, then a stall and pressure test, well before the transmission is opened up. Don't assume a rebuild is needed until pressures have been checked.
What engine issues come up with the 924G's 3056E DIT ATAAC?
The 924G runs the turbocharged, air-to-air aftercooled Cat 3056E DIT ATAAC, rated in the roughly 96 to 102 kW (129 to 137 hp) net range depending on rating and series; this is a different engine family from the naturally aspirated or non-ATAAC 3056 variants used on other machines. The most repeated field complaint is a hard or no-start condition with no smoke: the engine cranks and fuel reaches the injectors, but the electronic fuel actuator does not open, so nothing fires. Diagnosis should start by pulling active and logged diagnostic codes rather than assuming the injection pump is bad. A second recurring item on higher-hour engines is a failing fuel injection pump, showing up as gradual power loss or a derate.
What wear patterns show up on the 924G's Z-bar loader linkage over time?
The bucket-to-arm link pins and bushings are a known wear point on the Z-bar linkage. As pins wear egg-shaped inside the bushings, the linkage develops play that shows up as rattling or clunking during loading and dumping. Regular greasing at each pin joint, until grease purges at the seal, slows this wear; skipped grease intervals are the main driver of premature pin failure. On a used machine, cycle the bucket through a full lift, tilt, and dump motion and watch and listen for play at each pin rather than assuming any noise is just normal clatter.
What electrical or sensor issues are common on the 924G?
A fuel gauge that reads incorrectly or not at all is a widely reported nuisance across 924G loaders rather than something tied to one serial range. Typical causes are an open signal wire in the machine harness, a poor ground or power supply at the dash, or a failed sender; an ECM fault is possible but far less common. Diagnostic codes can be pulled at the instrument cluster without a laptop: with the key off, cycle it through on and off three times within about ten seconds, then leave it on; the display steps through active and logged codes. Use that before chasing wiring blind.
Is there a known brake-system quirk worth watching on the 924G?
The 924G uses oil-cooled, wet-disc service brakes charged through front and rear hydraulic accumulators. A brake-pressure warning light that flashes briefly under braking, or a pedal that feels soft or spongy, is commonly traced to low nitrogen precharge in an accumulator rather than worn friction discs. Checking accumulator precharge and the charging valve is the standard first step, ahead of blaming disc wear. Because this is a load-bearing safety system, have your dealer verify accumulator precharge and brake wear limits rather than relying on pedal feel alone.
What should I check when buying a used 924G?
Beyond service records, focus on: tire condition and matched wear across the set, since uneven wear can signal alignment or duty-cycle issues and a full replacement set is a major expense; fluid puddles under the machine from hydraulic, coolant, transmission, or engine oil; play in the articulation joint center pin when the machine is angled and pushed against a load, since excess play means lost steering control under a full bucket; slop at the Z-bar bucket link pins through a full lift, tilt, and dump cycle; brake pedal feel and warning light behavior; and cold-start behavior, since hard starting is a known trait of the 3056E fuel system. Also confirm which loader arm style is fitted, conventional versus a single-tube arm, since resale value and parts support differ between them. Bring a mechanic along for the test drive and a full hydraulic cycle before you commit to purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 924G part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.