Caterpillarwheel-type loaderwheel loader
Caterpillar 914G
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 914G is a compact, small wheel-type loader built from the mid-1990s through the mid-2000s, sitting in Cat's sub-8-tonne loader class with roughly a 1.2-1.4 cubic metre bucket rating. It is powered by Cat's 3054-series four-cylinder turbocharged diesel - 3054T on earlier-built machines and 3054C on later production runs - producing approximately 67-75 kW (90-100 hp) depending on the rating standard and specific build, mated to a two-range hydrostatic transmission (no torque converter or powershift). Operating weight runs about 7,376-7,390 kg (16,262-16,300 lb), varying by configuration. Cat sold the platform in two forms sharing the same chassis and driveline: the standard 914G wheel loader with a conventional parallel-lift linkage and pin-on buckets, and the IT14G Integrated Toolcarrier, which adds an eight-bar parallel-lift linkage with a factory hydraulic quick coupler for fast changes between buckets, forks, and other work tools. The 914G was Cat's small-loader offering ahead of the later 914G2 (Cat C4.4 engine) and the Z-bar-linkage 914K that followed it.
Within the 914G name itself, Cat carried out a running engineering update partway through the production life, with later-built 914G standard loaders and IT14G toolcarriers (identifiable by their serial number ranges) moving to the revised 3054C engine while earlier machines used the 3054T - so buyers and parts shoppers should always confirm engine suffix and serial prefix rather than assume one engine across the whole run. Cat eventually retired the 914G designation in favor of the 914G2 (Cat C4.4 engine) and then the Z-bar 914K; note that Caterpillar has since reused the plain "914" model number for a modern, unrelated small wheel loader built around the Cat C3.6 engine, a completely different platform from this legacy G-series machine and not a direct descendant. Because thousands of 914G and IT14G units built across the 1990s-2000s remain in daily use on farms, scrapyards, landscaping fleets, and municipal lots long after Cat shifted focus to newer platforms, the used-equipment and salvage-parts market for this simple, mechanically governed, hydrostatic-drive loader stays active - valued for straightforward diagnostics, interchangeable IT-series attachments, and a driveline that is comparatively inexpensive to keep running versus newer electronically controlled small loaders.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 914G specifications
Engine
| Engine model | Caterpillar 3054T (3054 turbocharged diesel), inline 4-cylinder; later parts/reman literature references the same 4.4L displacement class under the Cat C4.4 designation — treat as the same base engine family, not a contamination |
| Gross power | 100 hp (74.6 kW) at 2,300 rpm; alternate 90 hp (67 kW) at 2,200 rpm — specification range |
| Net power | 96 hp (71.6 kW) at 2,300 rpm (consistently reported alongside the 100 hp gross figure) |
| Displacement | 4.4 L (268.6 cu in / 4,402 cc) — Cat 3054 family: 4.13 in bore × 5.00 in stroke. A 4.0 L (243 cu in) figure appearing in some listings is unreliable for this model. |
| Cylinders | 4, inline, turbocharged, direct injection |
| Emissions tier | Emission standard uncertain; EU Stage II / EPA Tier 2 plausible for mid-1990s–2000s era |
Weights
| Operating weight (standard configuration) | 16,262–16,300 lb (7,376–7,390 kg) |
| Operating weight (heavier configuration) | Up to ~17,530 lb (7,950 kg) reported by some sources, which may reflect the IT14G integrated-toolcarrier variant covered in the same Cat specalog as the 914G, or an optional counterweight configuration rather than the base loader — varies by configuration |
| Shipping weight | Not separately published by any source found |
| Ground pressure | Not published — ground pressure figures are not typically issued for wheeled loaders of this class |
Dimensions
| Overall length (bucket on ground) | 6.23–6.28 m (20.4–20.7 ft) |
| Width over tires | 2.40–2.44 m (7.9–8.0 ft) |
| Height to top of cab | 3.10–3.11 m (10.17–10.2 ft) |
| Wheelbase | 2.60 m (8.5 ft) |
| Ground clearance | 0.455–0.456 m (1.5 ft / 17.9 in) |
| Hinge pin height (max) | 3.44 m (11.25 ft) |
| Maximum dump/discharge height | 2.6–2.66 m (8.5–8.7 ft) — minor variance between sources |
| Turning radius (outside) | 4.75–5.18 m (15.6–17.0 ft) — minor variance between sources |
Performance
| Travel speed — low range | 9 km/h (5.6 mph) |
| Travel speed — high range (forward and reverse) | 35 km/h (21.7 mph) |
| Static tipping load (full turn) | 11,680–11,737 lb (5,300–5,324 kg) — consistent across sources within a narrow range |
| Breakout force | 62 kN (14,007 lbf) per most sources; one source reports 59.7 kN (13,135 lbf) — minor variance, treat as approximate range |
| Hydraulic pump flow / relief pressure | Approx. 90 L/min (24 gpm) at 245 bar (3,550 psi), per cross-referenced spec listings |
| Gradeability | Not published by any source found |
Service capacities (summary)
| Fuel tank | 150 L (39.6 gal / US) |
| Hydraulic system (total) | 100 L (26.4 US gal) |
| Engine oil (with filter) | 6.8–7.0 L (1.8 gal / 7.4 qt) — consistent across sources |
| Cooling system | 22–23 L (5.8–6.1 gal) — consistent across sources |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
914G fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat 3054T diesel | approx. 6.8-7.0 L (1.8 US gal / 7.4 qt) | Cat DEO (Diesel Engine Oil); viscosity by climate roughly SAE 15W-40 for temperate/warm ambient, stepping down to SAE 10W-30 in colder ambient (below about -15C/5F), per Cat's multigrade selection guidance for this engine family |
| Cooling system | approx. 22.0 L (5.8 US gal / 23.1 qt) | Cat DEAC (Diesel Engine Antifreeze/Coolant), full-strength or mixed per climate; Cat ELC (Extended Life Coolant) cited as the modern equivalent/retrofit option for this era of Cat diesel |
| Fuel tank | 150.0 L (39.6 US gal) | Diesel fuel per Cat fuel specification (no brand-name lubricant applicable) |
| Transmission (hydrostatic, two-range) | not separately published; on this compact wheel loader/toolcarrier the hydrostatic transmission draws from the shared hydraulic system reservoir rather than a standalone transmission sump | Cat TDTO (Transmission/Drive Train Oil) or Cat HYDO (Hydraulic Oil), viscosity graded by climate (approx. SAE 10W in cold ambient, SAE 30/10W-30 in warm ambient) - consistent with the shared hydraulic/hydrostatic circuit |
| Hydraulic tank (reservoir only) | 70.0 L (18.5 US gal) | Cat HYDO (Hydraulic Oil); Cat TDTO accepted as an alternate fill on this machine class per Cat fluid bulletins; viscosity selected by ambient temperature (SAE 10W cold climates, SAE 30/10W-30 warmer climates) |
| Hydraulic system total (tank plus lines, cylinders, and hydrostatic drive circuit) | 100.0 L (26.4 US gal) | Cat HYDO (Hydraulic Oil), same viscosity-by-climate guidance as the hydraulic tank entry |
| Front axle and differential (includes integrated final drive/planetary reduction at each wheel end) | approx. 15.1 L (4.0 US gal) per axle | Cat TDTO (Transmission/Drive Train Oil); viscosity by climate similar to transmission/hydraulic fill (SAE 10W cold, SAE 30/10W-30 warm) |
| Rear axle and differential (includes integrated final drive/planetary reduction at each wheel end) | approx. 15.1 L (4.0 US gal) per axle | Cat TDTO (Transmission/Drive Train Oil); viscosity by climate similar to transmission/hydraulic fill (SAE 10W cold, SAE 30/10W-30 warm) |
| Grease points (pins, bushings, linkages) - spec only, no system capacity | n/a (grease gun application, not a fill volume) | Cat Multipurpose Grease (NLGI 2), effective working range roughly -30C to 40C (-22F to 104F); Cat Advanced 3Moly Grease cited as a heavier-duty alternative for high-load pin joints |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 914G maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the 914G beyond the schedule
Predictive Maintenance & Fluid Analysis
Because the 914G runs a mechanically governed 3054/3054T/3054C engine with no ECM and a hydrostatic drivetrain instead of a torque converter, scheduled S·O·S-style oil sampling from the engine, hydrostatic transmission, and front/rear axle housings is the earliest warning of pump, motor, or gear wear before a hydrostatic charge-pressure or axle failure sidelines the machine. Track hydraulic fluid cleanliness closely, since the fixed-displacement gear pump and quick-coupler circuit on IT14G units are sensitive to particulate contamination, and monitor coolant condition on the ELC-compatible cooling system to catch liner or radiator issues early.
Corrective & Common Repairs
Typical 914G repair calls involve bleeding trapped air from the lift/tilt hydraulic circuit after hose, cylinder, or pump work, chasing soft or drifting response from the hydrostatic drive due to charge-pressure loss, and troubleshooting the IT14G's integrated quick-coupler hydraulic cylinder when tool lock-on becomes unreliable. Wet-disc brake drag or fade often traces back to contaminated brake system oil, while rough running or hard starting on the mechanically governed 3054-series engine usually points to the injection pump, injectors, or water intrusion in the fuel system rather than any electronic fault.
Overhaul & Rebuild Points
High-hour 914G/IT14G units concentrate wear at the hydrostatic pump and drive motor, the front and rear axle final drives (bearings, gears, and seals loaded by repeated loader-cycle shock), and the articulation joint and lift-linkage pins and bushings that absorb frame flex under full bucket loads. On IT14G toolcarriers, the eight-bar parallel-lift linkage bushings and quick-coupler pins see extra cycling and should be inspected alongside axle and driveline rebuilds. Turbocharger overhaul is a common companion job when engine hours climb, given the 3054T/3054C's reliance on boost for rated output.
Seasonal & Environment Servicing
Cold-climate 914G operation calls for verifying the block heater/starting aid, checking coolant freeze protection on the ELC-based system, and switching to a winter-grade hydraulic and hydrostatic transmission oil so the fixed-displacement pump and hydrostatic drive respond properly at start-up. In hot, dusty environments, clear debris from the radiator and hydraulic oil cooler fins more frequently and shorten the articulation, steering, and lift-linkage grease interval, since fine grit accelerates pin and bushing wear on this articulated-frame, wet-brake loader faster than the standard schedule assumes.
914G common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 069-2922 | Gasket | Fuel system service | Check fitment → |
| 122-4550 | Filter Element As-Air | Air intake service | Check fitment → |
| 111-8738 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 113-0305 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
914G fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| MID 26 CID 110 FMI 0 | Engine coolant temperature above normal operating range, reported by the Caterpillar Monitoring System (CMS) | Low coolant level or external leak, blocked radiator core or fan guard screen, slipping or broken fan drive belt, or a stuck thermostat | Stop and idle the engine safely, check coolant level and look for leaks once cool, clean the radiator core, and check fan belt tension before restarting |
| MID 26 CID 100 FMI 1 | Engine oil pressure below normal operating range, reported by the Caterpillar Monitoring System (CMS) | Low engine oil level, plugged oil filter, worn oil pump, or worn main/rod bearings | Shut the engine down immediately, check oil level and condition, and verify pressure with a mechanical gauge before restarting |
| MID 26 CID 1961 FMI 0 | Hydraulic system oil temperature above normal operating range, reported by the Caterpillar Monitoring System (CMS) | Low hydraulic fluid level, clogged oil cooler fins/debris screen, sustained high-load operation of the hydrostatic drive and work tool hydraulics, or a cooling fan fault | Reduce load and allow the machine to idle and cool, check hydraulic fluid level, and clean debris from the oil cooler core |
| MID 26 CID 168 FMI 4 | Electrical system (battery/charging) voltage below normal, reported by the Caterpillar Monitoring System (CMS) | Weak or failing battery, corroded/loose battery or alternator connections, slipping alternator belt, or a failed alternator | Check battery state of charge and terminal connections, inspect and tension the alternator belt, and load-test the alternator output |
| MID 26 CID 247 FMI 2 | Erratic or incorrect data received over the machine's data link between the Caterpillar Monitoring System and another onboard electronic control module | Damaged, corroded, or loose data-link wiring/connector, or a fault in one of the linked control modules | Inspect the data-link harness and connectors for damage or corrosion, and reseat/clean connections before further diagnosis with Cat ET |
| MID 25 CID 545 | Ether starting-aid injection control relay fault (MID 25 is the ether/cold-start injection control unit) | Failed or stuck ether injection relay, blown fuse, or open/shorted relay control wiring | Check the ether aid fuse and relay, verify relay coil and switched output with a multimeter, and inspect wiring to the injection solenoid |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
914G attachments & work tools
General-purpose buckets
Standard buckets for the 914G run about 1.2-1.4 m3 (1.6-1.8 cu yd) capacity with a width around 2.4 m (95 in), matching the compact wheel loader/small-loader size class. These mount via the machine's standard pin-on front linkage.
Multi-purpose and light-material buckets
4-in-1 style multi-purpose buckets and higher-capacity light-material buckets are offered for bulkier, low-density loads and general site cleanup/backfill work. They use the same front-linkage mounting as the standard bucket, so no separate carrier is required.
Industrial/utility grapple buckets
Clamp-jaw grapple buckets for handling debris, brush, rock, and scrap are practical for this size class. Jaw actuation draws on an auxiliary (third) hydraulic circuit rather than the base lift/tilt function.
Pallet forks
Fork-and-carriage attachments for palletized material handling mount to the same front coupler/pin arrangement used for buckets. The loader linkage (parallel Z-bar/8-bar type, depending on configuration) keeps tines level through the lift range without manual adjustment.
Rotary/angle/pickup/utility brooms
Sweeping attachments (even-pressure rotary brooms, angled windrowing brooms, curb-side pickup brooms with gutter brush, and utility brooms for light debris) are a common work tool family for this machine class. Powered broom rotation needs the optional auxiliary hydraulic function, and a water-kit for dust suppression is a frequent pairing.
Snow removal tools
Snow blowers (auger-and-chute design) and trip-edge snow plows/pushes are offered for winter service work. Blowers require auxiliary hydraulic flow to drive the auger and rotate the discharge chute; plows are largely mechanical, relying on the base lift/tilt circuit.
Coupler/mounting system
The 914G's base configuration uses a pin-on bucket/tool mount; an integral quick coupler (in-cab switch actuating a hydraulic locking cylinder with an audible unlock alert) was offered as a factory option on the 914G. Its integrated-toolcarrier sibling, the IT14G (same chassis/engine, 8-bar parallel-lift linkage), carried this quick coupler as standard equipment rather than an option -- distinguish the two when sourcing tool-carrier hardware.
Hydraulic kit / auxiliary circuit
Base lift/tilt hydraulics are pilot-operated, single-lever, open-center, with pump flow around 90 L/min (24 gpm) and system pressure near 245 bar (3550 psi), varies by configuration/series. A third hydraulic function is needed for clamp-type tools (grapples) and a fourth function for tools needing reversible flow (broom rotation reversal, blower chute swing); both were offered as factory-installed options rather than standard fitment.
Cab and guarding options
A ROPS/FOPS-certified canopy or enclosed cab was standard for operator protection, with an optional air-suspension seat for comfort. Accumulator-based ride control (to smooth lift-arm bounce when traveling with a loaded bucket or forks) is a feature commonly offered on wheel loaders in this size class, though its exact availability on the 914G by model year/configuration could not be independently confirmed and varies by configuration/series.
All 914G assemblies by section
Every catalogued assembly group for the Caterpillar 914G. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
119-3854 Air Cleaner Gp
| 09***76 | Nut As; (7/16-20-Thd) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
| 11***54 | Air Cleaner Group | 1 |
119-3855 Air Cleaner Gp
| 11***54 | Air Cleaner Group | 1 |
| 11***55 | Air Cleaner Group | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
113-1514 Extension Gp-Exhaust -Short
| 10***28 | Pipe-Extension | 1 |
| 11***14 | Extension Group-Exhaust; -Short | 1 |
| 7N***10 | Clamp | 1 |
113-1515 Extension Gp-Exhaust -Long
| 11***15 | Extension Group-Exhaust; -Long | 1 |
| 5M***56 | Pipe-Extension | 1 |
| 7N***10 | Clamp | 1 |
135-0514 Lines Gp-Air
| 0A***26 | Fitting | 1 |
| 10***03 | Hose | 1 |
| 11***05 | Hose-Air Inlet | 1 |
112-2626 Lines Gp-Air
| 0A***26 | Fitting | 1 |
| 10***03 | Hose | 1 |
| 11***26 | Lines Group-Air | 1 |
114-2378 Manifold Gp-Exhaust
| 03***18 | Gasket | 2 |
| 11***78 | Manifold Group-Exhaust | 1 |
| 11***79 | Manifold-Exhaust | 1 |
114-2408 Manifold Gp-Inlet
| 11***08 | Manifold Group-Inlet | 1 |
| 11***09 | Manifold-Inlet | 1 |
| 14***14 | Gasket | 1 |
134-5065 Muffler Gp
| 13***78 | Muffler As | 1 |
| 13***79 | Bracket As | 1 |
| 13***80 | Bracket As | 1 |
112-2623 Muffler Gp
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 1 |
| 11***23 | Muffler Group | 1 |
| 12***28 | Spacer; (11x20x10-mm Thk) | 2 |
121-3015 Precleaner Gp
| 12***81 | Seal; (103.5-cm Each) | 0 |
| 12***02 | Extension As | 1 |
| 12***03 | Extension As | 1 |
123-2926 Turbocharger Gp
| 12***26 | Turbocharger Group | 1 |
| 13***73 | Ring | 1 |
| 13***74 | Seal-O-Ring | 1 |
123-2925 Turbocharger Gp
| 10***53 | Stud | 3 |
| 10***54 | Nut | 4 |
| 10***90 | Union | 1 |
Basic Engine
212-1400 Camshaft Gp
| 06***78 | Washer | 1 |
| 06***79 | Dowel | 1 |
| 06***99 | Bushing-Idler Gear | 2 |
6i-0894 Camshaft Gp
| 06***79 | Dowel | 1 |
| 09***99 | Washer | 1 |
| 1B***36 | Key-Woodruff | 1 |
133-9820 Cover Gp-Accessory Drive
| 06***10 | Washer | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
6i-0643 Cover Gp-Accessory Drive
| 06***10 | Washer | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
212-1407 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 10***46 | Seal | 1 |
| 11***04 | Seal-O-Ring | 1 |
124-3822 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 10***46 | Seal | 1 |
| 12***22 | Cover Group-Valve Mechanism | 1 |
212-0912 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 1 |
6i-1079 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 0 |
212-0910 Cylinder Block Gp
| 03***45 | Dowel | 2 |
| 06***09 | Plug-Facing | 1 |
| 15***84 | Cylinder Block Group | 1 |
111-1806 Cylinder Block Gp
| 03***63 | Plug | 1 |
| 06***08 | Plug | 1 |
| 06***09 | Plug-Facing | 1 |
111-1807 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
209-5562 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
152-2884 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
209-6725 Cylinder Block Gp
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
| 06***06 | Plug | 2 |
127-3325 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
212-0923 Cylinder Head Gp
| 15***83 | Cylinder Head Group | 1 |
| 16***61 | Gasket-Cylinder Head | 1 |
| 21***23 | Cylinder Head Group | 1 |
123-3286 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***54 | Washer | 8 |
| 06***34 | Cotter-Cap | 16 |
123-3285 Cylinder Head Gp
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 10***11 | Gasket | 1 |
130-1503 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***54 | Washer | 8 |
| 06***34 | Cotter-Cap | 16 |
150-8683 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***54 | Washer | 8 |
| 06***34 | Cotter-Cap | 16 |
110-3030 Drain Gp-Ecology
| 10***39 | Plug As-Drain; (Hydraulic Tank) | 1 |
| 10***43 | Tube As-Ecology Drain | 1 |
| 11***30 | Drain Group-Ecology | 1 |
7c-4532 Drain Gp-Engine Oil
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***38 | Valve-Shutoff; (Engine Oil Pan Drain) | 1 |
| 7C***32 | Drain Group-Oil Pan; Oil Pan Drain Group | 1 |
123-2988 Drive Gp-Fan
| 10***63 | Bolt; (M10x1.5x80-mm) | 4 |
| 12***88 | Drive Group-Fan | 1 |
| 13***39 | Housing As | 1 |
145-8659 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 10***31 | Flywheel As | 1 |
| 14***10 | Bolt | 10 |
100-6321 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 6 |
| 10***21 | Flywheel Group | 1 |
6i-1157 Gear Gp-Front
| 06***99 | Bushing-Idler Gear | 2 |
| 06***00 | Plate-Retaining | 1 |
| 2W***29 | Gear As-Idler; (63-Teeth) | 1 |
130-6352 Housing Gp-Flywheel
| 10***17 | Plug | 3 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
101-3613 Housing Gp-Flywheel
| 10***13 | Housing Group-Flywheel | 1 |
| 10***15 | Bolt; (M8x1.25x10-mm) | 2 |
| 10***17 | Plug | 3 |
6i-0834 Housing Gp-Front
| 10***77 | Stud | 2 |
| 10***90 | Plug | 1 |
| 14***44 | Shield | 1 |
155-8320 Housing Gp-Front
| 14***44 | Shield | 1 |
| 14***45 | Damper | 1 |
| 15***20 | Housing Group-Front | 1 |
123-2897 Lifting Gp-Engine
| 11***59 | Bolt; (M10x1.5x35-mm) | 2 |
| 12***97 | Lifting Group-Engine | 1 |
| 12***98 | Plate | 2 |
179-1227 Mounting Gp-Alternator
| 17***27 | Mounting Group-Alternator | 1 |
| 6I***54 | Bolt; (M8x1.25x30-mm) | 2 |
| 6I***39 | Bolt; (M8x1.25x70-mm) | 1 |
107-4851 Mounting Gp-Engine & Tmsn
| 09***13 | Case | 2 |
| 10***51 | Mounting Group-Engine & Tmsn | 1 |
| 10***56 | Support As; (Engine) | 1 |
106-8851 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 10***71 | Bolt | 6 |
| 10***51 | Pan Group-Oil | 1 |
141-4707 Pan Gp-Oil
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
| 10***12 | Tube | 1 |
212-0920 Piston & Rod Gp
| 12***26 | Piston As; (Grade H) | 4 |
| 12***28 | Piston As; (Grade K) | 4 |
| 12***36 | Ring-Retaining | 2 |
124-3534 Piston & Rod Gp
| 12***24 | Piston As; (Grade F) | 4 |
| 12***25 | Piston As; (Grade G) | 4 |
| 12***26 | Piston As; (Grade H) | 4 |
211-0203 Plug Gp-Cylinder Block
| 21***03 | Plug Group-Cylinder Block | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 1 |
130-4648 Plug Gp-Cylinder Block
| 06***24 | Plug | 2 |
| 13***48 | Plug Group-Cylinder Block | 1 |
130-4647 Plug Gp-Cylinder Head
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 13***47 | Plug Group-Cylinder Head | 1 |
| 24***28 | Washer; (16.5x20.5x1.6-mm Thk) | 1 |
152-4931 Plug Gp-Engine
| 10***87 | Plug | 16 |
| 15***31 | Plug Group-Engine | 1 |
6i-0500 Pulley Gp-Crankshaft
| 6I***00 | Pulley Group-Crankshaft | 1 |
| 6I***01 | Block | 1 |
| 6I***02 | Pulley | 1 |
119-0808 Pulley Gp-Fan Drive
| 11***08 | Pulley Group-Fan Drive | 1 |
| 13***16 | V-Belt Set; (Includes 2-Belts)(Includes 2 Belts) | 1 |
| 13***79 | Pulley-Fan Drive | 1 |
119-1419 Pulley Gp-Fan Drive
| 11***74 | Pulley-Fan | 1 |
| 11***19 | Pulley Group-Fan Drive | 1 |
| 13***28 | Spacer | 1 |
122-2333 Suppression Ar-Sound
| 11***19 | Pulley Group-Fan Drive | 1 |
| 12***33 | Suppression Ar-Sound | 1 |
| 12***34 | Hood & Guard Group; -Sound Suppression | 1 |
125-8087 Suppression Ar-Sound
| 11***08 | Pulley Group-Fan Drive | 1 |
| 12***34 | Hood & Guard Group; -Sound Suppression | 1 |
| 12***87 | Suppression Ar-Sound | 1 |
130-8754 Suppression Gp-Sound
| 12***67 | Insulation | 1 |
| 12***69 | Insulation | 1 |
| 12***71 | Insulation | 1 |
212-0924 Valve Mechanism Gp
| 00***06 | Ring-Retaining | 2 |
| 03***07 | Shaft As | 1 |
| 06***83 | Plug-Shaft End | 2 |
6i-1204 Valve Mechanism Gp
| 00***06 | Ring-Retaining | 2 |
| 03***07 | Shaft As | 1 |
| 06***83 | Plug-Shaft End | 2 |
Braking System
148-2578 Accumulator & Mtg Gp-Brake
| 10***73 | Clip | 4 |
| 14***78 | Accumulator & Mtg Group-Brake | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
144-8520 Accumulator Gp-Brake -Uncharged
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
149-5533 Accumulator Gp-Brake -Charged
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
107-4729 Control Gp-Parking Brake
| 10***29 | Control Group-Parking Brake | 1 |
| 11***07 | Cable As; (Coupler To Parking Brake) | 1 |
| 15***44 | Angle As | 1 |
107-4621 Control Gp-Parking Brake
| 10***21 | Control Group-Parking Brake | 1 |
| 11***36 | Bracket As | 1 |
| 11***39 | Bracket As | 1 |
107-4702 Control Gp-Service Brake
| 0S***75 | Pin-To Arm Assembly And Retainer | 1 |
| 10***55 | Valve Group-Rotary; -Creeper Control | 1 |
| 10***02 | Control Group-Service Brake | 1 |
147-8607 Control Gp-Service Brake
| 11***98 | Boot | 1 |
| 12***68 | Rod | 1 |
| 12***69 | Roller | 1 |
107-4802 Control Gp-Service Brake
| 05***96 | Kit-Servo | 1 |
| 09***41 | Gasket | 1 |
| 0S***75 | Pin-To Arm Assembly And Retainer | 1 |
122-9727 Cylinder Gp-Master
| 05***96 | Kit-Servo | 1 |
| 12***27 | Cylinder Group-Master | 1 |
| 12***14 | Kit-Repair | 1 |
143-8386 Cylinder Gp-Master
| 05***96 | Kit-Servo | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 3 |
| 14***86 | Cylinder Group-Master | 1 |
8r-3583 Cylinder Gp-Master
| 09***41 | Gasket | 1 |
| 13***43 | Kit-Cylinder | 1 |
| 5G***56 | Plug | 1 |
130-5521 Cylinder Gp-Master
| 05***96 | Kit-Servo | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 13***21 | Cylinder Group-Master | 1 |
148-2571 Lines Gp-Service Brake
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 11***88 | Tube As | 1 |
| 11***11 | Tube As | 2 |
147-6934 Piston
| 14***34 | Piston | 1 |
147-6936 Plate-Reaction
| 14***36 | Plate-Reaction | 1 |
156-5314 Valve Gp-Steer & Brk Manifold
| 15***14 | Valve Group-Steer & Brk Manifold | 1 |
| 16***01 | Kit-Seal | 1 |
Cooling System
210-9601 Connection Gp-Water
| 13***54 | Connector As | 1 |
| 13***56 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
| 21***01 | Connection Group-Water | 1 |
155-3873 Conversion Ar-Engine Cooling
| 03***12 | Rivet (To Fuel Tank) | 11 |
| 13***80 | Spacer-Fan | 1 |
| 13***81 | Baffle As | 1 |
123-3290 Cooler Gp-Fltr Base & Eng Oil
| 06***06 | Plug | 1 |
| 10***50 | Clamp-Hose | 6 |
| 10***19 | Clip | 1 |
112-2630 Fan Gp-Suction
| 11***30 | Fan Group-Suction | 1 |
| 12***08 | Spider As-Fan | 1 |
| 7X***38 | Bolt-Plt; (M8 X 1.25 X 100) | 4 |
111-4141 Lines Gp-Coolant
| 11***41 | Lines Group-Coolant | 1 |
| 11***82 | Hose As | 1 |
| 12***99 | Elbow | 1 |
6i-4040 Lines Gp-Water
| 10***89 | Clamp-Hose | 2 |
| 13***54 | Connector As | 1 |
| 13***56 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
126-6870 Pump & Mtg Gp-Water
| 10***95 | Bolt; (M8x1.25x35-mm) | 2 |
| 11***70 | Stud | 3 |
| 12***70 | Pump & Mtg Group-Water | 1 |
6i-0442 Pump Gp-Water
| 10***25 | Bolt | 6 |
| 15***40 | Kit-Water Pump | 1 |
| 6I***00 | Seal | 1 |
151-4825 Pump Gp-Water
| 15***25 | Pump Group-Water | 1 |
| 15***38 | Seal | 1 |
| 20***29 | Seal-O-Ring | 1 |
112-2621 Radiator Gp
| 03***81 | Spacer; (9x16x25-mm Thk) | 2 |
| 09***32 | Valve As-Drain | 2 |
| 10***98 | Support | 1 |
138-1254 Radiator Gp
| 13***54 | Radiator Group | 1 |
| 8T***76 | Valve; (Drain)(Radiator) | 1 |
138-2242 Recovery Gp-Coolant
| 13***42 | Recovery Group-Coolant | 1 |
| 14***11 | Cap-Vented; (Coolant Recovery) | 1 |
Electrical And Starting System
3e-6329 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
| 3E***29 | Alarm Group; -Action | 1 |
112-2622 Alternator Gp-Charging
| 10***99 | Bolt-Socket Head; (M10x1.5x120-mm) | 1 |
| 11***22 | Alternator Group-Charging | 1 |
| 12***11 | Spacer; (3x15x17-mm Thk) | 1 |
3e-7772 Alternator Gp-Charging
| 11***57 | Pulley-Alternator | 1 |
| 11***65 | Kit-Alternator Bearing | 1 |
| 11***66 | Kit-Repair; (Alternator Brushes) | 1 |
117-3273 Battery & Wiring Gp -Battery Ground
| 10***50 | Cable As | 1 |
| 11***73 | Battery & Wiring Group; -Battery Ground | 1 |
| 1M***86 | Terminal-Ring; (0-Ga, 1/2-In Screw) | 1 |
112-7167 Battery Gp -Heavy Duty
| 11***67 | Battery Group; -12-Volt, 900-Ampere | 1 |
| 9X***04 | Battery-Maintenance Free; (12 Volt)(900 Amp) | 2 |
112-7166 Battery Gp
| 11***66 | Battery Group; -12-Volt, Maintenance Free | 1 |
| 3T***60 | Battery | 2 |
118-8176 Control & Wiring Gp-Pwr Train -Hydrostatic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***32 | Plug As | 1 |
116-2025 Control Gp-Position -Bucket
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 11***25 | Control Group-Bucket Positioner | 1 |
| 11***26 | Control As-Electronic | 1 |
3e-7843 Control Gp-Position -Work Tool
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***43 | Control Group-Bucket Positioner; (Bucket Positioner) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
3e-7844 Control Gp-Lift Kickout -Work Tool
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 3E***44 | Control Group-Lift Kickout; (Lift Kickout) | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
115-1317 Converter Gp-Electrical
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***17 | Converter Group-Electrical | 1 |
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 1 |
225-3773 Converter Gp-Electrical
| 11***17 | Converter Group-Electrical | 1 |
| 22***73 | Converter Group-Electrical | 1 |
155-2651 Distributor Gp-Electronic
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***51 | Distributor Group-Electronic | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
127-8605 Heater Gp-Jacket Water
| 12***05 | Heater Group-Jacket Water | 1 |
| 12***06 | Element As-Jacket Water Heater | 1 |
| 12***09 | Cord As-Heater Element; -240-Volt | 1 |
127-8603 Heater Gp-Jacket Water
| 12***03 | Heater Group-Jacket Water | 1 |
| 12***04 | Element As-Jacket Water Heater | 1 |
| 13***13 | Kit-Seal; (Water Jacket) | 1 |
107-6032 Lamp Gp-Dome
| 10***32 | Lamp Group-Dome | 1 |
| 25***86 | Lamp; (24-Volt, 10-Watt) | 1 |
117-3468 Lamp Gp-Flood
| 11***68 | Lamp Group-Flood; -Suspended Mount | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 9X***39 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
| 9X***55 | Body As-Lamp | 1 |
3e-7586 Lamp Gp-Head & Signal
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
3e-7587 Lamp Gp-Head & Signal -Lh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***49 | Lens As; (Headlight) | 1 |
105-4849 Lamp Gp-Head & Signal -Lh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
105-4850 Lamp Gp-Head & Signal -Rh
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
3e-6466 Lamp Gp-Signal -Rear Turn
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***66 | Lamp Group-Signal; -Rear Turn, Parking | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 3 |
4y-3580 Lamp Gp-Signal -Front, Lh
| 4Y***15 | Lamp; (24-Volt, 25-Watt)(24v/Clear) | 1 |
| 4Y***17 | Lamp; (24-Volt, 5-Watt) | 1 |
| 4Y***18 | Lens-Turn Signal Lamp; (Amber) | 1 |
4y-3263 Lamp Gp-Signal -Front, Rh
| 4Y***63 | Lamp Group-Signal; Turn Signal And Clearance Lamp Assembly-L.H. | 1 |
| 4Y***15 | Lamp; (24-Volt, 25-Watt)(24v/Clear) | 1 |
| 4Y***17 | Lamp; (24-Volt, 5-Watt) | 1 |
130-3453 Lamp Gp-Signal -Stop, Tail
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***53 | Lamp Group-Signal; -Stop, Tail | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
107-4401 Lamp Gp-Signal -Stop, Tail
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***01 | Lamp Group-Signal; (24-Volt, Stop, Tail)(Stop, Tail) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
162-2073 Lamp Gp-Signal -Rear Turn
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***73 | Lamp Group-Signal; -Rear Turn | 1 |
| 16***74 | Lens-Amber | 1 |
145-6929 Lamp Gp-Stop & Tail
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***29 | Lamp Group-Stop & Tail | 1 |
108-1029 Lamp Gp-Warning Beacon -Amber
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 9R***42 | Plug As | 1 |
177-2035 Lighting Ar-Flood & Signal
| 10***19 | Panel Group-Instrument | 1 |
| 10***36 | Lighting Group-Flood & Signal | 1 |
| 15***87 | Reflector Group | 1 |
177-2037 Lighting Ar-Roading
| 14***71 | Lighting Group-Roading | 1 |
| 15***87 | Reflector Group | 1 |
| 17***96 | Panel Group-Instrument | 1 |
116-0926 Lighting Ar-Roading -Dipped, Lh
| 11***26 | Lighting Ar-Roading; -Dipped, Lh | 1 |
| 3E***87 | Lamp Group-Head; -Lh-Roading, Dipped, Lh | 2 |
177-2034 Lighting Ar-Roading
| 11***89 | Lighting Group-Roading | 1 |
| 15***87 | Reflector Group | 1 |
| 17***96 | Panel Group-Instrument | 1 |
116-0924 Lighting Ar-Roading -Dipped, Rh
| 11***24 | Lighting Ar-Roading; -Dipped, Rh | 1 |
| 3E***86 | Lamp Group-Head; -Roading, Dipped, Rh | 2 |
116-0925 Lighting Ar-Roading -Dipped, Rh
| 10***49 | Lamp Group-Head & Signal; -Lh | 1 |
| 10***50 | Lamp Group-Head & Signal; -Rh | 1 |
| 11***25 | Lighting Ar-Roading; -Dipped, Rh | 1 |
177-2036 Lighting Ar-Roading
| 10***19 | Panel Group-Instrument | 1 |
| 11***32 | Roading Ar | 1 |
| 17***36 | Lighting Ar-Roading | 1 |
115-1558 Lighting Gp-Auxiliary -Cab Front
| 11***58 | Lighting Group-Auxiliary; -2-Lamp, Cab, Front | 1 |
| 11***59 | Plate | 2 |
| 11***68 | Lamp Group-Flood; -Suspended Mount | 2 |
119-9758 Lighting Gp-Flood -Canopy Front
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***58 | Lighting Group-Flood; -Canopy Front | 1 |
| 11***10 | Harness As; (Lighting) | 1 |
120-6668 Lighting Gp-Flood -Canopy
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***41 | Lamp Group-Flood; (24-Volt) | 4 |
| 11***26 | Roof Assem. | 1 |
117-9622 Lighting Gp-Flood -Cab
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***41 | Lamp Group-Flood; (24-Volt) | 4 |
| 10***81 | Cable As-Coaxial | 1 |
107-4636 Lighting Gp-Flood & Signal
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***01 | Screw-Machine; (M5x0.8x25-mm) | 4 |
| 10***36 | Lighting Group-Flood & Signal | 1 |
112-7187 Lighting Gp-Flood & Signal
| 10***04 | Plate | 2 |
| 10***41 | Lamp Group-Flood; (24-Volt) | 2 |
| 11***42 | Fastener | 2 |
145-6871 Lighting Gp-Roading
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 3 |
| 11***61 | Housing | 2 |
112-7189 Lighting Gp-Roading
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***01 | Lamp Group-Signal; (24-Volt, Stop, Tail)(Stop, Tail) | 2 |
| 10***04 | Plate | 2 |
117-6033 Lighting Gp-Signal
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***11 | Bracket As | 2 |
| 11***33 | Lighting Group-Signal | 1 |
122-6465 Lighting Gp-Warning Beacon
| 10***33 | Switch As-Warning Beacon | 1 |
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
107-6142 Lighting Gp-Warning Beacon
| 10***33 | Switch As-Warning Beacon | 1 |
| 10***42 | Lighting Group-Warning Beacon | 1 |
| 10***29 | Lamp Group-Warning Beacon; (24-Volt, Amber) | 1 |
117-3915 Motor Gp-Electric -Secondary Steering
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
| 7X***08 | Washer-Hard; (10.2x16x2-mm Thk) | 2 |
117-6032 Roading Ar
| 10***32 | Speedometer Group | 1 |
| 11***32 | Roading Ar | 1 |
| 11***33 | Lighting Group-Signal | 1 |
114-8122 Sender Gp
| 11***22 | Sender Group | 1 |
| 3E***48 | Sensor Group-Speed; (Transmission Intermediate Outp) | 1 |
116-4926 Sender Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***26 | Sender Group | 1 |
| 11***80 | Sensor As-Speed; (Engine) | 1 |
114-2371 Starting Aid Gp
| 03***59 | Plug-Start | 1 |
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
162-0146 Starting Aid Gp
| 03***59 | Plug-Start | 1 |
| 12***56 | Washer | 1 |
| 16***46 | Starting Aid Group | 1 |
212-1427 Starting Aid Gp
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 10***83 | Nut; (3/16), . Drum | 1 |
1g-9963 Starting Motor Gp-Electric
| 10***29 | Starting Motor Group-Electric | 1 |
| 1G***63 | Starting Motor Group-Electric | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
100-6929 Starting Motor Gp-Electric
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***15 | Housing-Starting Motor | 1 |
143-0541 Starting Motor Gp-Electric
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***15 | Housing-Starting Motor | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
107-4825 Switch Gp-Disconnect -Battery
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 10***25 | Switch Group-Disconnect; -Battery | 1 |
| 11***83 | Cable As | 1 |
179-0006 Switch Gp-Magnetic
| 17***06 | Switch Group-Magnetic; -Hydraulic Tank Fill Pump/Motor Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
175-2309 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***81 | Switch As-Magnetic; (Start Relay) | 1 |
118-3534 Switch Gp-Magnetic
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
| 17***09 | Switch Group-Magnetic; -24-Volt-Start Relay | 1 |
175-2308 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
167-0138 Switch Gp-Magnetic -Main Relay
| 15***61 | Wedge-Plug Lock; (2-Pin) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
137-2666 Switch Gp-Pressure
| 03***63 | Plug | 1 |
| 13***66 | Switch Group-Pressure; -Engine Oil | 1 |
| 25***10 | Switch As-Pressure; (Engine Oil) | 1 |
107-6138 Switch Gp-Wiper
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***38 | Switch Group-Wiper | 1 |
| 11***74 | Wiper And Washer Switch Assembly; (Wiper, Washer)(Wiper, Washer, Rear) | 2 |
107-6133 Switch Gp-Wiper -Intermittent
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***33 | Switch Group-Wiper; -Intermittent | 1 |
| 11***86 | Wiper Switch Assembly; (24-Volt)(Front/Intermittent) | 1 |
112-7192 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***92 | Warning Group-Backup | 1 |
| 12***49 | Alarm Group | 1 |
119-2177 Wiring Gp-Cab
| 10***61 | Wire Assembly; (Rear) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
117-6050 Wiring Gp-Cab
| 11***61 | Housing | 2 |
| 11***97 | Switch As; (High, Low Beam) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
107-4618 Wiring Gp-Cab
| 10***61 | Wire Assembly; (Rear) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
107-4722 Wiring Gp-Chassis
| 09***65 | Grommet | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
107-4819 Wiring Gp-Engine
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
107-4723 Wiring Gp-Front
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***23 | Wiring Group-Front | 1 |
| 16***01 | Horn As; (24-Volt, Low Tone) | 1 |
118-0814 Wiring Gp-Platform
| 10***61 | Wire Assembly; (Rear) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
107-4724 Wiring Gp-Power Train
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***24 | Wiring Group-Power Train | 1 |
| 11***88 | Harness As | 1 |
117-3806 Wiring Gp-Power Train
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
176-3389 Wiring Gp-Rear
| 03***44 | Clip | 5 |
| 11***48 | Harness As-Lighting | 1 |
| 17***89 | Wiring Group-Rear | 1 |
117-6039 Wiring Gp-Rear
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***39 | Wiring Group-Rear | 1 |
| 11***40 | Bracket As | 2 |
108-2498 Wiring Gp-Ride Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 10***98 | Wiring Group-Ride Control | 1 |
116-4928 Wiring Gp-Ride Control
| 10***04 | Suppressor As-Arc | 1 |
| 10***30 | Switch As; (Auto Ride Control) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
110-1329 Wiring Gp-Secondary Steering
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***72 | Cable As | 2 |
Engine Arrangement
107-4860 Engine Ar
| 10***21 | Flywheel Group | 1 |
| 10***13 | Housing Group-Flywheel | 1 |
| 10***63 | Kit-Gasket; (Bottom) | 1 |
203-0762 Engine Ar-Primary
| 12***97 | Lifting Group-Engine | 1 |
| 12***25 | Turbocharger Group | 1 |
| 12***88 | Drive Group-Fan | 1 |
107-4850 Installation Ar-Engine
| 10***50 | Installation Ar-Engine | 1 |
| 10***51 | Mounting Group-Engine & Tmsn | 1 |
| 10***10 | Cooler Group-Hydraulic Oil | 1 |
Frame And Body
120-6140 Baffle Gp-Radiator
| 03***12 | Rivet (To Fuel Tank) | 9 |
| 12***40 | Baffle Group-Radiator | 1 |
| 12***96 | Baffle As | 1 |
121-0445 Conversion Ar-Roading
| 10***27 | Film-Identification; (20-Km/H)(20 Kph) | 3 |
| 10***43 | Plate As | 2 |
| 10***00 | Film-Fire Extinguisher | 1 |
121-0451 Conversion Ar-Roading -Fast Travel
| 10***61 | Option Ar-Tool Roll | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***43 | Plate As | 2 |
121-0452 Conversion Ar-Roading
| 10***03 | Restrainer | 1 |
| 10***69 | Plate As | 1 |
| 12***52 | Conversion Ar-Roading | 1 |
168-1836 Conversion Ar-Roading
| 10***86 | Kit-First Aid | 1 |
| 10***44 | Plate-Warning; (Slow Moving Vehicle) | 2 |
| 10***61 | Option Ar-Tool Roll | 1 |
107-4738 Counterweight Gp
| 10***38 | Counterweight Group | 1 |
| 10***36 | Counterweight | 2 |
| 7X***89 | Bolt; (M24x3x100-mm) | 4 |
109-3738 Counterweight Gp
| 10***37 | Counterweight Group | 1 |
| 10***38 | Counterweight Group | 1 |
| 10***38 | Counterweight Group | 1 |
107-4737 Counterweight Gp
| 10***37 | Counterweight Group | 1 |
| 10***37 | Counterweight | 2 |
| 7X***66 | Bolt; (M20x2.5x110-mm) | 4 |
107-4705 Fender Gp-Roading
| 10***05 | Fender Group-Roading | 1 |
| 12***47 | Fender Group-Roading | 1 |
| 2V***26 | Bumper-To Dash Panel | 4 |
126-8547 Fender Gp-Roading
| 10***94 | Fender As-Rear; (Rh) | 1 |
| 10***95 | Fender As-Rear; (Lh) | 1 |
| 10***96 | Fender As-Front; (Rh) | 1 |
126-8552 Fender Gp-Roading
| 11***51 | Fender As-Rear; (Rh) | 1 |
| 11***52 | Fender As-Rear; (Lh) | 1 |
| 11***53 | Fender As-Front; (Rh) | 1 |
111-3750 Fender Gp-Roading
| 11***50 | Fender Group-Roading | 1 |
| 11***55 | Extension-Fender | 2 |
| 11***53 | Plate | 2 |
107-4706 Firewall Gp
| 10***06 | Firewall Group | 1 |
| 11***71 | Plate As | 2 |
| 14***07 | Firewall As | 1 |
107-4708 Frame Gp-Loader
| 09***36 | Boss; (M10x1.5-Thd) | 1 |
| 10***95 | Frame As | 1 |
| 10***97 | Plate | 1 |
107-4807 Frame Gp-Rear
| 10***96 | Pin-Keeper | 1 |
| 10***07 | Frame Group-Rear | 1 |
| 10***08 | Cover | 1 |
107-4703 Guard Gp-Bottom
| 10***03 | Guard Group-Bottom | 1 |
| 11***57 | Plate As | 1 |
| 8R***92 | Plate | 1 |
120-3352 Guard Gp-Bottom
| 11***58 | Guard As-Bottom | 1 |
| 12***52 | Guard Group-Bottom | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 8 |
120-6854 Guard Gp-Lines -Tilt
| 12***54 | Guard Group-Lines; -Tilt | 1 |
| 13***61 | Sleeve-Abrasion; (93.5-cm Each) | 0 |
| 7K***81 | Strap-Pressure & Return Hoses To | 8 |
120-6855 Guard Gp-Lines -3-Valve
| 12***55 | Guard Group-Lines; -3-Valve | 1 |
| 13***61 | Sleeve-Abrasion; (93.5-cm Each) | 0 |
| 7K***81 | Strap-Pressure & Return Hoses To | 16 |
120-4612 Guard Gp-Lines -4-Valve
| 12***12 | Guard Group-Lines; -4-Valve | 1 |
| 13***61 | Sleeve-Abrasion; (93.5-cm Each) | 0 |
| 7K***81 | Strap-Pressure & Return Hoses To | 24 |
107-4809 Guard Gp-Power Train
| 10***09 | Guard Group-Power Train | 1 |
| 11***32 | Guard-Power Train | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
107-4721 Hitch Gp-Articulating
| 10***21 | Hitch Group-Articulating | 1 |
| 10***39 | Shim; (3-mm Thk) | 1 |
| 10***64 | Cap-Lower | 1 |
128-6868 Hood & Guard Gp
| 10***76 | Hood-Shell | 1 |
| 10***09 | Hinge As | 2 |
| 11***48 | Bracket As | 2 |
107-4709 Hood & Guard Gp
| 10***76 | Hood-Shell | 1 |
| 10***09 | Hood & Guard Group | 1 |
| 10***72 | Support As | 1 |
122-2334 Hood & Guard Gp -Sound Suppression
| 10***72 | Support As | 1 |
| 11***63 | Striker As | 1 |
| 12***34 | Hood & Guard Group; -Sound Suppression | 1 |
176-3385 Hood Gp
| 11***86 | Bracket As; (Lh) | 4 |
| 11***46 | Latch As-Rotary | 1 |
| 11***47 | Linkage As | 1 |
176-3386 Hood Gp
| 11***86 | Bracket As; (Lh) | 4 |
| 11***46 | Latch As-Rotary | 1 |
| 11***47 | Linkage As | 1 |
107-4712 Ladder Gp
| 10***12 | Ladder Group | 1 |
| 11***84 | Step As | 1 |
| 11***85 | Step As | 1 |
107-4811 Lines Gp-Grease
| 10***11 | Lines Group-Grease | 1 |
| 12***51 | Tube As | 1 |
| 12***52 | Tube As | 1 |
107-4815 Link Gp-Steering Frame Lock
| 10***15 | Link Group-Steering Frame Lock | 1 |
| 10***21 | Link | 1 |
| 5P***37 | Pin (Lock) | 2 |
155-6487 Reflector Gp
| 15***87 | Reflector Group | 1 |
| 9R***99 | Reflector; (Red) | 2 |
| 9R***04 | Reflector-Amber | 4 |
118-8053 Suppression Ar-Sound
| 10***09 | Hood & Guard Group | 1 |
| 11***23 | Muffler Group | 1 |
| 11***53 | Suppression Ar-Sound | 1 |
128-6870 Suppression Gp-Sound -Inner Hood Panels
| 12***67 | Insulation | 1 |
| 12***71 | Insulation | 1 |
| 12***72 | Insulation | 1 |
Fuel System
211-0168 Bracket Gp-Throttle
| 12***30 | Bracket | 1 |
| 21***68 | Bracket Group-Throttle | 1 |
109-3759 Cable Gp-Governor Control
| 10***59 | Cable Group-Governor Control | 1 |
| 13***47 | Spring | 1 |
| 13***21 | Seal-Umbrella | 1 |
107-4852 Control Gp-Governor
| 10***52 | Control Group-Governor | 1 |
| 10***59 | Cable Group-Governor Control | 1 |
| 10***11 | Bracket | 1 |
212-1412 Filter & Lines Gp-Fuel
| 03***47 | Ferrule | 1 |
| 03***14 | Nut; (7/16-In) | 1 |
| 06***98 | Nut; (3/8-24-Thd) | 2 |
138-3096 Filter Gp-Fuel
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
130-7092 Filter Gp-Water Sep & Fuel
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
| 12***80 | Kit-Water Base; (Water Separator) | 1 |
130-4646 Fitting Gp-Fuel Lines
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
141-5780 Guard Gp-Fuel Injection Pump
| 14***86 | Plate | 1 |
| 14***80 | Guard Group-Fuel Injection Pump | 1 |
| 14***62 | Film-Notice; (Fuel Pump) | 1 |
107-4814 Lines Gp-Fuel
| 00***86 | Connector-Hose (1/4-18nptf Thd) | 1 |
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***49 | Plug | 2 |
123-2924 Lines Gp-Fuel Filter
| 03***47 | Ferrule | 1 |
| 03***14 | Nut; (7/16-In) | 1 |
| 06***98 | Nut; (3/8-24-Thd) | 2 |
123-2942 Lines Gp-Fuel Injection
| 03***25 | Elbow | 1 |
| 03***73 | Washer; (10.01x20.85x2.03-mm Thk) | 4 |
| 06***64 | Fitting-Flared | 1 |
120-4611 Pump Gp-Fuel -Electric Priming
| 12***11 | Pump Group-Fuel; -Electric Priming | 1 |
| 12***94 | Plate | 1 |
| 1P***78 | Clamp; (Hose) | 2 |
156-0218 Pump Gp-Fuel Injection
| 14***43 | Washer-Lock | 1 |
| 14***44 | Screw | 1 |
| 14***46 | Seal | 1 |
123-2936 Pump Gp-Fuel Injection
| 06***06 | Seal | 1 |
| 10***77 | Stud | 3 |
| 11***22 | Nut | 1 |
192-9785 Pump Gp-Fuel Injection
| 06***06 | Seal | 1 |
| 10***77 | Stud | 3 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
192-9784 Pump Gp-Fuel Injection
| 14***43 | Washer-Lock | 1 |
| 14***44 | Screw | 1 |
| 14***46 | Seal | 1 |
123-2937 Pump Gp-Fuel Injection
| 12***37 | Pump Group-Fuel Injection | 1 |
| 12***31 | Seal-O-Ring | 1 |
| 14***43 | Washer-Lock | 1 |
107-4718 Tank Gp-Fuel
| 00***64 | End; (Hose) | 1 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 10***18 | Tank Group-Fuel | 1 |
Hydraulic System
6e-5918 Cylinder Gp-Tilt
| 16***00 | Seal Assem. | 1 |
| 16***07 | Seal-U-Cup | 1 |
| 17***83 | Bolt-Hex Head; (M30x3.5x90mm) | 1 |
113-1050 Accumulator Gp-Pilot Oil -Charged
| 11***50 | Accumulator Group-Pilot Oil; -Charged | 1 |
| 15***36 | Valve-Gas; (Brake) | 1 |
| 16***96 | Service Kit; (Includes Seals) | 1 |
157-5544 Accumulator Gp-Pilot Oil -Uncharged
| 11***50 | Accumulator Group-Pilot Oil; -Charged | 1 |
| 15***44 | Accumulator Group-Pilot Oil; -Uncharged | 1 |
108-6204 Block Gp-Hydraulic
| 10***92 | Spring | 1 |
| 10***93 | Poppet | 3 |
| 10***96 | Spring | 1 |
169-5824 Control & Lines Gp-Ride
| 11***50 | Valve Group-Solenoid; -Ride Control | 1 |
| 12***84 | Bracket As; (Lh) | 1 |
| 12***40 | Bracket | 4 |
107-4855 Control Ar-Load -Auto Ride Control
| 10***82 | Lines Group-Ride Control | 1 |
| 10***55 | Control Ar-Load; -Auto Ride Control | 1 |
| 11***56 | Lines Group-Tilt Cylinder | 1 |
107-4857 Control Ar-Load -Manual Ride Control
| 10***82 | Lines Group-Ride Control | 1 |
| 10***57 | Control Ar-Load; -Manual Ride Control | 1 |
| 10***98 | Wiring Group-Ride Control | 1 |
107-4858 Control Ar-Load
| 10***58 | Control Ar-Load | 1 |
| 11***55 | Lines Group-Lift Cylinder | 1 |
| 11***56 | Lines Group-Tilt Cylinder | 1 |
167-7692 Control Ar-Ride -Ride Control
| 11***28 | Wiring Group-Ride Control | 1 |
| 16***92 | Control Ar-Ride; -Ride Control | 1 |
| 16***24 | Control & Lines Group-Ride | 1 |
131-8345 Conversion Ar-Hydraulic -Fourth Function Control
| 10***37 | Switch As-Kickout; (Bucket, Fork Selector) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***37 | Block | 5 |
159-9543 Conversion Ar-Hydraulic
| 13***10 | Film-Oil; (Biodegradable)(Hydraulic) | 1 |
| 15***43 | Conversion Ar-Hydraulic | 1 |
132-4357 Conversion Ar-Hydraulic -Third Function Control
| 11***22 | Tube As | 1 |
| 11***34 | Hose Assem. | 1 |
| 11***37 | Block | 3 |
109-1210 Cooler Gp-Hydraulic Oil
| 10***10 | Cooler Group-Hydraulic Oil | 1 |
| 11***09 | Bracket As | 1 |
| 11***10 | Bracket As | 1 |
109-1334 Cylinder Gp-Lift
| 10***34 | Cylinder Group-Lift | 1 |
| 10***35 | Cylinder As | 1 |
| 16***00 | Seal Assem. | 1 |
196-4191 Fitting Gp-Hydraulic -Quick Disconnect
| 15***17 | Cap-Dust | 1 |
| 15***18 | Cap-Dust | 1 |
| 19***25 | Fitting As; (Quick Disconnect, Female) | 1 |
153-2985 Gauge Gp-Sight -Hydraulic Oil Level
| 12***53 | Bolt; (M12x1.75x46.5-mm) | 2 |
| 15***85 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 5J***74 | Seal-O-Ring (Id=15.54mm) | 4 |
111-7511 Hydraulic Ar
| 10***53 | Lines Group-Front | 1 |
| 11***52 | Valve & Mtg Group-Main Control; -3-Function | 1 |
| 11***64 | Lines Group-Pilot | 1 |
121-0512 Hydraulic Ar
| 10***53 | Lines Group-Front | 1 |
| 11***66 | Lines Group-Pilot | 1 |
| 11***23 | Control Group-Pilot Operated Hydraulic; -Joystick, 4-Function | 1 |
107-4813 Hydraulic Ar
| 10***13 | Hydraulic Ar | 1 |
| 10***00 | Tank Group-Hydraulic | 1 |
| 10***34 | Cylinder Group-Lift | 2 |
109-4811 Hydraulic Ar
| 10***00 | Tank Group-Hydraulic | 1 |
| 10***34 | Cylinder Group-Lift | 2 |
| 10***11 | Hydraulic Ar | 1 |
107-4845 Hydraulic Ar
| 10***45 | Hydraulic Ar | 1 |
| 11***51 | Valve & Mtg Group-Main Control | 1 |
| 11***63 | Lines Group-Pilot | 1 |
122-9140 Kickout & Positioner Gp
| 10***70 | Clamp-Half | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
148-2573 Lines Gp-Accumulator -Brake
| 14***73 | Lines Group-Accumulator; -Brake | 1 |
| 14***90 | Hose As | 1 |
| 14***18 | Connector As | 1 |
107-4753 Lines Gp-Front
| 10***53 | Lines Group-Front | 1 |
| 11***20 | Tube As; (Rh) | 1 |
| 11***21 | Tube As; (Lh) | 1 |
121-0513 Lines Gp-Front -4-Valve
| 11***22 | Tube As | 2 |
| 12***14 | Hose As | 2 |
| 12***13 | Lines Group-Front; -4-Valve | 1 |
148-2572 Lines Gp-Hydraulic
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***72 | Lines Group-Hydraulic | 1 |
| 14***82 | Hose As | 1 |
112-9262 Lines Gp-Hydraulic
| 11***62 | Lines Group-Hydraulic | 1 |
| 13***43 | Hose As | 1 |
| 13***44 | Hose As | 1 |
112-9267 Lines Gp-Hydraulic -Ground Speed
| 11***64 | Tube As | 1 |
| 11***65 | Hose As | 1 |
| 11***66 | Hose As | 1 |
148-2576 Lines Gp-Hydraulic Oil Cooler
| 14***74 | Hose As | 1 |
| 14***75 | Hose As | 1 |
| 14***76 | Lines Group-Hydraulic Oil Cooler | 1 |
111-4255 Lines Gp-Lift Cylinder
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 10***97 | Tube As | 1 |
| 11***55 | Lines Group-Lift Cylinder | 1 |
111-4264 Lines Gp-Pilot
| 10***73 | Clip | 2 |
| 11***64 | Lines Group-Pilot | 1 |
| 11***34 | Hose Assem. | 1 |
111-4263 Lines Gp-Pilot
| 10***73 | Clip | 2 |
| 11***63 | Lines Group-Pilot | 1 |
| 11***34 | Hose Assem. | 1 |
111-4266 Lines Gp-Pilot
| 10***73 | Clip | 2 |
| 11***66 | Lines Group-Pilot | 1 |
| 11***34 | Hose Assem. | 1 |
111-7480 Lines Gp-Pump
| 11***80 | Lines Group-Pump | 1 |
| 11***91 | Bracket As | 1 |
| 11***21 | Tube As | 1 |
107-4782 Lines Gp-Ride Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 10***82 | Lines Group-Ride Control | 1 |
| 10***97 | Tube As | 1 |
111-4256 Lines Gp-Tilt Cylinder
| 10***36 | Hose As | 2 |
| 11***56 | Lines Group-Tilt Cylinder | 1 |
| 11***11 | Tube As | 1 |
226-2758 Magnet Gp-Pilot Valve
| 10***92 | Sleeve | 1 |
| 10***90 | Clapper | 2 |
| 10***39 | Coil Assem. | 1 |
152-1110 Manifold Gp-Control -Brake Accumulator Charge
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***54 | Switch As-Pressure; (Brake Oil) | 1 |
| 15***05 | Manifold | 1 |
111-4268 Pump & Mtg Gp-Impl & Steering
| 00***37 | Seal-O-Ring | 3 |
| 09***07 | Nut; (M12x1.75-Thd) | 4 |
| 11***68 | Pump & Mtg Group-Impl & Steering | 1 |
108-6200 Tank Gp-Hydraulic
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***14 | Seal-O-Ring (Id=9.80mm) | 4 |
| 09***17 | Seal-O-Ring (Id=13.80mm) | 4 |
141-7557 Tank Gp-Hydraulic
| 10***83 | Tank As; (Hydraulic) | 1 |
| 10***04 | Block Group-Hydraulic | 1 |
| 11***23 | Gasket | 1 |
121-0514 Valve & Mtg Gp-Main Control -4-Function
| 12***14 | Valve & Mtg Group-Main Control; -4-Function | 1 |
| 13***25 | Valve Group-Bank 4 | 1 |
| 13***90 | Tube As | 1 |
111-4252 Valve & Mtg Gp-Main Control -3-Function
| 11***52 | Valve & Mtg Group-Main Control; -3-Function | 1 |
| 13***24 | Valve Group-Bank 3 | 1 |
| 13***89 | Tube As | 1 |
111-4251 Valve & Mtg Gp-Main Control
| 11***51 | Valve & Mtg Group-Main Control | 1 |
| 13***23 | Valve Group-Bank 2 | 1 |
| 13***87 | Tube As | 1 |
133-3823 Valve Gp-Bank 2
| 10***16 | Valve Group-Relief; -Pilot Operated-Main | 1 |
| 10***28 | Valve Group-Relief; -Pilot Operated | 2 |
| 11***36 | Valve Group-Control; -Lift | 1 |
112-3244 Valve Gp-Bank 2
| 06***24 | Rod | 1 |
| 10***16 | Valve Group-Relief; -Pilot Operated-Main | 1 |
| 10***00 | Rod | 2 |
112-3245 Valve Gp-Bank 3
| 10***14 | Valve Group-Relief; -Pilot Operated-Line | 2 |
| 10***16 | Valve Group-Relief; -Pilot Operated-Main | 1 |
| 10***18 | Housing-Outlet | 1 |
133-3824 Valve Gp-Bank 3
| 10***14 | Valve Group-Relief; -Pilot Operated-Line | 2 |
| 10***16 | Valve Group-Relief; -Pilot Operated-Main | 1 |
| 10***28 | Valve Group-Relief; -Pilot Operated | 2 |
133-3825 Valve Gp-Bank 4
| 10***01 | Rod | 2 |
| 10***02 | Rod | 1 |
| 11***36 | Valve Group-Control; -Lift | 1 |
9t-7634 Valve Gp-Check -Load
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 10***91 | Seal Kit | 1 |
| 9T***34 | Valve Group-Check; -Makeup | 1 |
117-3637 Valve Gp-Control -Auxiliary
| 11***33 | Spring | 2 |
| 11***34 | Seat-Spring | 2 |
| 11***06 | Cap-End | 2 |
117-3636 Valve Gp-Control -Lift
| 11***06 | Cap-End | 1 |
| 11***36 | Valve Group-Control; -Lift | 1 |
| 12***16 | Bolt-Shoulder | 1 |
113-0985 Valve Gp-Drain
| 10***39 | Plug As-Drain; (Hydraulic Tank) | 1 |
| 10***43 | Tube As-Ecology Drain | 1 |
| 11***85 | Valve Group-Drain | 1 |
112-1817 Valve Gp-Manual -Ride Control-Hydraulic Lockout
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
123-5746 Valve Gp-Motor Control -Hydrostatic
| 12***46 | Valve Group-Motor Control; -Hydrostatic | 1 |
| 12***96 | Pin | 1 |
| 12***97 | Cover | 1 |
124-9879 Valve Gp-Motor Control -Hydrostatic
| 06***40 | Seal-O-Ring (Id=37.69mm) | 1 |
| 10***17 | Seal-O-Ring | 2 |
| 12***98 | Seat | 1 |
124-9878 Valve Gp-Motor Control -Hydrostatic
| 06***39 | Seal-O-Ring | 1 |
| 09***33 | Ring-Retaining | 1 |
| 09***18 | Setscrew-Socket; (M4x0.7x6-mm) | 1 |
124-9976 Valve Gp-Motor Control -Hydrostatic
| 09***33 | Ring-Retaining | 1 |
| 09***01 | Bolt-Socket Head; (M8x1.25x40-mm) | 4 |
| 09***18 | Setscrew-Socket; (M4x0.7x6-mm) | 1 |
124-9977 Valve Gp-Motor Control -Hydrostatic
| 10***17 | Seal-O-Ring | 2 |
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
123-5743 Valve Gp-Motor Control -Hydrostatic
| 09***33 | Ring-Retaining | 1 |
| 09***18 | Setscrew-Socket; (M4x0.7x6-mm) | 1 |
| 12***17 | Plug | 2 |
144-4573 Valve Gp-Pilot -Lift, Tilt
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 2 |
| 10***29 | Valve Group-Pilot Cartridge; (Tilt Dump) | 1 |
| 10***92 | Sleeve | 1 |
144-2817 Valve Gp-Pilot -Joystick, 3-Function
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***47 | Valve Group-Pilot; -Auxiliary | 1 |
| 12***28 | Plate As-Mounting | 1 |
112-9686 Valve Gp-Pilot -Joystick, 2-Function
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 2 |
| 10***29 | Valve Group-Pilot Cartridge; (Tilt Dump) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
144-2816 Valve Gp-Pilot -Joystick, 2-Function
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 2 |
| 10***29 | Valve Group-Pilot Cartridge; (Tilt Dump) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
112-3246 Valve Gp-Pilot -Auxiliary
| 10***29 | Valve Group-Pilot Cartridge; (Tilt Dump) | 2 |
| 10***72 | Boot | 1 |
| 10***73 | Clamp-Boot | 1 |
112-3247 Valve Gp-Pilot -Auxiliary
| 10***29 | Valve Group-Pilot Cartridge; (Tilt Dump) | 2 |
| 10***72 | Boot | 1 |
| 10***73 | Clamp-Boot | 1 |
112-9688 Valve Gp-Pilot -Joystick, 4-Function
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***73 | Plate As-Mounting | 1 |
| 11***47 | Valve Group-Pilot; -Lift, Tilt | 1 |
112-1847 Valve Gp-Pilot -Lift, Tilt
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 2 |
| 10***29 | Valve Group-Pilot Cartridge; (Tilt Dump) | 1 |
| 10***92 | Sleeve | 1 |
112-9687 Valve Gp-Pilot -Joystick, 3-Function
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***73 | Plate As-Mounting | 1 |
| 11***47 | Valve Group-Pilot; -Lift, Tilt | 1 |
144-2818 Valve Gp-Pilot -Joystick, 4-Function
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***46 | Valve Group-Pilot; -Auxiliary | 1 |
| 11***47 | Valve Group-Pilot; -Auxiliary | 1 |
106-8528 Valve Gp-Relief -Pilot Operated
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
186-0909 Valve Gp-Relief -Main
| 03***79 | Seal-O-Ring (Id=10.82mm) | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 15***03 | Service Kit; (Consist Of Seal, Ring And Spring) | 1 |
105-7716 Valve Gp-Relief -Pilot Operated-Main
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
122-3566 Valve Gp-Relief -Pilot Operated
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
186-0906 Valve Gp-Relief -Line, Auxiliary-Line
| 03***79 | Seal-O-Ring (Id=10.82mm) | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 15***03 | Service Kit; (Consist Of Seal, Ring And Spring) | 1 |
105-7714 Valve Gp-Relief -Pilot Operated-Line
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
186-0911 Valve Gp-Relief -Pilot Operated-Line
| 03***79 | Seal-O-Ring (Id=10.82mm) | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 15***03 | Service Kit; (Consist Of Seal, Ring And Spring) | 1 |
143-9354 Valve Gp-Shutoff -Hydraulic Lockout
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 12***54 | Plate; (6-mm Thk) | 1 |
| 12***56 | Plate; (4-mm Thk) | 1 |
111-0350 Valve Gp-Solenoid -Ride Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***50 | Valve Group-Solenoid; -Ride Control | 1 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
Implements
142-8464 Bracket Gp-Transport
| 10***03 | Restrainer | 1 |
| 14***24 | Bracket As | 2 |
| 14***64 | Bracket Group-Transport | 1 |
107-4701 Control Gp-Bucket
| 10***04 | Arm As-Lift | 1 |
| 10***06 | Lever As | 1 |
| 10***01 | Control Group-Bucket | 1 |
Lubrication System
126-6576 Filler Gp-Engine Oil
| 11***02 | Filler As | 1 |
| 11***03 | Cap; (Engine Oil Fill) | 1 |
| 11***04 | Seal-O-Ring | 1 |
123-2935 Gauge Gp-Oil Level (Dipstick)
| 12***32 | Tube As | 1 |
| 12***33 | Clip | 1 |
| 12***34 | Gauge As-Oil Level (Dipstick); (Engine) | 1 |
114-2376 Lines Gp-Engine Oil
| 06***13 | Gasket | 1 |
| 10***15 | Bolt | 3 |
| 10***12 | Tube | 1 |
6i-0911 Pump Gp-Engine Oil
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 12***94 | Shaft | 1 |
212-1403 Pump Gp-Gerotor
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 10***15 | Bolt | 3 |
Machine Arrangement
107-4699 Chassis Ar
| 10***99 | Chassis Ar | 1 |
| 10***01 | Control Group-Bucket | 1 |
| 10***03 | Guard Group-Bottom | 1 |
107-4698 Chassis Ar
| 10***98 | Chassis Ar | 1 |
| 10***01 | Control Group-Bucket | 1 |
| 10***03 | Guard Group-Bottom | 1 |
122-1978 Conversion Ar-Certification
| 10***41 | Visor Group-Cab | 1 |
| 10***32 | Speedometer Group | 1 |
| 12***78 | Conversion Ar-Certification | 1 |
121-0448 Conversion Ar-Certification
| 10***41 | Visor Group-Cab | 1 |
| 12***48 | Conversion Ar-Certification | 1 |
| 12***32 | Box Group-Tool | 1 |
154-1931 Conversion Ar-Certification
| 15***31 | Conversion Ar-Certification | 1 |
| 16***16 | Film; (Roading Height) | 1 |
109-4801 General Ar
| 10***98 | Chassis Ar | 1 |
| 10***30 | Power Train Ar | 1 |
| 10***50 | Installation Ar-Engine | 1 |
109-4802 General Ar
| 10***99 | Chassis Ar | 1 |
| 10***70 | Power Train Ar | 1 |
| 10***13 | Hydraulic Ar | 1 |
Operator Station
107-5980 Air Conditioner & Mounting Gp -With Cable Control
| 10***80 | Air Conditioner & Mounting Group; -With Cable Control | 1 |
| 10***70 | Switch As-Rocker; (Air Conditioner Control) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
311-8547 Air Conditioner Gp
| 03***26 | Retainer | 1 |
| 10***41 | Clip; (Slot) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
107-3318 Air Conditioner Gp
| 03***26 | Retainer | 1 |
| 03***38 | Clamp | 2 |
| 10***43 | Plate-Orifice | 2 |
180-9873 Air Conditioner Gp
| 03***26 | Retainer | 1 |
| 03***38 | Clamp | 2 |
| 10***43 | Plate-Orifice | 2 |
8y-5904 Armrest Gp
| 3E***12 | Nut-Square; (3/8-16-Thd) | 1 |
| 6V***87 | Screw-Pan Head; (10-24x1-In) | 4 |
| 8S***03 | Ring-Retaining | 1 |
8y-6000 Armrest Gp -Lh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 1K***72 | Locknut Horn To Guard | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 1 |
8y-4200 Armrest Gp -Rh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 1K***72 | Locknut Horn To Guard | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 1 |
107-6150 Cab Ar-Enclosed Rops
| 10***16 | Rops Group-Enclosed | 1 |
| 10***18 | Wiring Group-Cab | 1 |
| 10***19 | Panel Group-Instrument | 1 |
107-4614 Cab Ar-Enclosed Rops
| 10***14 | Cab Ar-Enclosed Rops | 1 |
| 10***16 | Rops Group-Enclosed | 1 |
| 10***18 | Wiring Group-Cab | 1 |
111-7864 Cab Gp-Enclosed Rops
| 10***44 | Glass-Front; (Lh) | 1 |
| 10***45 | Glass-Front; (Center)(Lh) | 1 |
| 10***46 | Glass-Cab Corner; (Lh Rear) | 1 |
119-9754 Canopy Ar
| 10***19 | Panel Group-Instrument | 1 |
| 10***21 | Control Group-Parking Brake | 1 |
| 10***26 | Control Group-Tmsn & Joystick | 1 |
107-4615 Canopy Ar-Open Rops
| 10***15 | Canopy Ar-Open Rops | 1 |
| 10***17 | Rops Group-Open | 1 |
| 10***19 | Panel Group-Instrument | 1 |
119-9755 Canopy Gp -Support Hardware
| 11***55 | Canopy Group; -Support Hardware | 1 |
| 11***63 | Post As | 1 |
| 11***64 | Post As | 1 |
112-2632 Compressor & Mtg Gp-Refrig
| 11***32 | Compressor & Mtg Group-Refrig | 1 |
| 11***92 | Bracket | 1 |
| 11***01 | Bracket | 1 |
3e-1906 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***69 | Valve Group-Relief; (Refrigerant Compressor) | 1 |
| 3E***06 | Compressor Group-Refrigerant | 1 |
101-1759 Compressor Gp-Refrigerant
| 10***59 | Compressor Group-Refrigerant | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
119-8200 Condenser Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***45 | Case As-Condenser | 1 |
| 11***00 | Condenser Group-Refrigerant | 1 |
107-4841 Control Ar-Speed -Standard
| 10***41 | Control Ar-Speed; -Standard | 1 |
| 11***20 | Cover Group-Console | 1 |
107-4842 Control Ar-Speed -Creeper
| 10***39 | Control Group-Creeper | 1 |
| 10***42 | Control Ar-Speed; -Creeper | 1 |
| 11***67 | Lines Group-Hydraulic; -Ground Speed | 1 |
107-4639 Control Gp-Creeper
| 10***55 | Valve Group-Rotary; -Creeper Control | 1 |
| 10***39 | Control Group-Creeper | 1 |
| 10***35 | Switch As-Speed Select | 1 |
119-2223 Control Gp-Pilot Operated Hyd -Joystick, 4-Function
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***37 | Switch As-Kickout; (Bucket, Fork Selector) | 1 |
| 10***50 | Support Assem. | 1 |
119-2224 Control Gp-Pilot Operated Hyd -Joystick, 2-Function
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***50 | Support Assem. | 1 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
119-2225 Control Gp-Pilot Operated Hyd -Joystick, 3-Function
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 10***50 | Support Assem. | 1 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
127-0987 Control Gp-Steering
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 10***35 | Kit-Cylinder | 1 |
| 10***44 | Kit-Tilt Lever | 1 |
107-4623 Control Gp-Steering
| 10***23 | Control Group-Steering | 1 |
| 10***07 | Support Assem. | 1 |
| 10***41 | Cover | 1 |
149-4189 Control Gp-Steering
| 10***07 | Support Assem. | 1 |
| 10***41 | Cover | 1 |
| 11***74 | Seal | 1 |
107-4626 Control Gp-Tmsn & Joystick
| 10***84 | Control Group-Transmission | 1 |
| 10***26 | Control Group-Tmsn & Joystick | 1 |
| 11***36 | Rod | 1 |
106-8984 Control Gp-Transmission
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***84 | Control Group-Transmission | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 10 |
149-2331 Control Gp-Transmission
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***31 | Control Group-Transmission | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
150-3716 Control Gp-Xmsn & Joystick
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 13***74 | Bolt-Socket Head; (M5x0.8x20-mm) | 4 |
| 14***43 | Lamp Group-Indicator; (Direction) | 1 |
136-1994 Conversion Ar-Air Conditioner -Kit
| 10***70 | Switch As-Rocker; (Air Conditioner Control) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***32 | Compressor & Mtg Group-Refrig | 1 |
178-0052 Conversion Ar-Eng Speed Cont
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***73 | Kit-Cable Control; (Machine) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
118-0820 Cover Gp-Console
| 10***35 | Switch As-Speed Select | 1 |
| 11***49 | Support As | 1 |
| 11***75 | Plate | 1 |
118-0809 Dash Gp
| 10***26 | Dash Assem. | 1 |
| 11***09 | Dash Group | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 4 |
107-6137 Defroster Gp-Cab
| 10***34 | Switch As; (Defroster) | 1 |
| 10***37 | Defroster Group-Cab | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
118-0815 Door Gp-Cab -Lh
| 10***15 | Door Assem.; (L.H.) | 1 |
| 10***17 | Cover; (Lh)(Lh) | 1 |
| 10***25 | Hinge Assem. | 2 |
164-4564 Door Gp-Cab -Fixed Window, Rh
| 10***04 | Insert | 2 |
| 10***25 | Hinge Assem. | 2 |
| 11***01 | Handhold | 1 |
137-7602 Door Gp-Cab -Fixed Windows
| 13***02 | Door Group-Cab; -With Fixed Windows | 1 |
| 16***63 | Door Group-Cab; -Fixed Window, Lh | 1 |
| 16***64 | Door Group-Cab; -Fixed Window, Rh | 1 |
164-4566 Door Gp-Cab -Sliding Window, Rh
| 09***23 | Ring-Retaining; (External) | 2 |
| 10***04 | Insert | 2 |
| 10***25 | Hinge Assem. | 2 |
111-0188 Door Gp-Cab -Fixed Glass, Lh
| 10***15 | Door Assem.; (L.H.) | 1 |
| 10***17 | Cover; (Lh)(Lh) | 1 |
| 10***25 | Hinge Assem. | 2 |
118-0816 Door Gp-Cab -Rh
| 10***16 | Door Assem. (R.H.) | 1 |
| 10***25 | Hinge Assem. | 2 |
| 11***81 | Glass | 1 |
137-7603 Door Gp-Cab -Sliding Windows
| 11***15 | Door Group-Cab; (L.H.) | 1 |
| 11***16 | Door Group-Cab; (R.H.) | 1 |
| 13***03 | Door Group-Cab; -With Sliding Windows | 1 |
164-4565 Door Gp-Cab -Sliding Window, Lh
| 09***23 | Ring-Retaining; (External) | 2 |
| 10***04 | Insert | 2 |
| 10***17 | Cover; (Lh)(Lh) | 1 |
111-0189 Door Gp-Cab -Fixed Glass, Rh
| 10***16 | Door Assem. (R.H.) | 1 |
| 10***25 | Hinge Assem. | 2 |
| 11***79 | Glass | 1 |
164-4563 Door Gp-Cab -Fixed Window, Lh
| 10***04 | Insert | 2 |
| 10***17 | Cover; (Lh)(Lh) | 1 |
| 10***25 | Hinge Assem. | 2 |
107-4630 Duct Gp-Cab Air
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 12 |
| 10***30 | Duct Group-Cab Air | 1 |
| 10***79 | Duct | 1 |
8y-6883 Extension Gp-Backrest -Cloth
| 11***30 | Kit-Cushion; (Cloth Backrest) | 1 |
| 8Y***77 | Pan As-Extension | 1 |
| 8Y***47 | Fastener | 2 |
119-4769 Filter Gp-Cab Air
| 11***38 | Filter Element-Cab Air; (Primary) | 1 |
| 11***05 | Filter Element-Cab Air; (Standard Efficiency) | 2 |
| 11***44 | Cover | 1 |
118-8115 Guard Gp-Fan
| 11***15 | Guard Group-Fan | 1 |
| 12***07 | Guard As-Fan | 2 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 8 |
145-9383 Guard Gp-Fan
| 14***83 | Guard Group-Fan | 1 |
| 15***67 | Guard As-Fan | 2 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 4 |
107-4629 Heater & Mtg Gp-Cab
| 10***17 | Heater Group-Cab | 1 |
| 10***29 | Heater & Mtg Group-Cab; -With Cable Control | 1 |
| 11***59 | Gasket; (Air Conditioner) | 1 |
107-3317 Heater Gp-Cab
| 03***26 | Retainer | 1 |
| 03***38 | Clamp | 2 |
| 10***43 | Plate-Orifice | 2 |
108-4582 Housing Gp-Seat Suspension
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
107-4645 Installation Gp-Radio
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***45 | Installation Group-Radio | 1 |
124-2482 Installation Gp-Radio
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
118-7244 Installation Gp-Radio
| 10***45 | Installation Group-Radio | 1 |
| 11***17 | Converter Group-Electrical | 1 |
| 11***44 | Installation Group-Radio | 1 |
117-9624 Liner Gp-Cab -Lower
| 11***25 | Cover As | 1 |
| 11***81 | Cover As; (Cab) | 1 |
| 11***14 | Insulation | 1 |
107-4634 Liner Gp-Cab -Upper
| 10***34 | Liner Group-Cab | 1 |
| 10***32 | Lamp Group-Dome | 1 |
| 11***56 | Cover As | 1 |
118-0807 Liner Gp-Cab
| 11***25 | Cover As | 1 |
| 11***81 | Cover As; (Cab) | 1 |
| 11***14 | Insulation | 1 |
118-0813 Liner Gp-Cab
| 11***25 | Cover As | 1 |
| 11***81 | Cover As; (Cab) | 1 |
| 11***14 | Insulation | 1 |
112-3255 Lines Gp-Air Conditioner
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***54 | Plate | 1 |
| 10***55 | Plate As | 1 |
107-6130 Lines Gp-Cab Heater
| 10***30 | Lines Group-Cab Heater | 1 |
| 2D***88 | Grommet (Note J) | 2 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 4 |
107-4643 Mirror Gp-Rear View -Interior
| 10***43 | Mirror Group-Rear View; -Interior | 1 |
| 11***56 | Plate | 2 |
| 23***46 | Nut-Jam; (3/8-16-Thd) | 2 |
117-6045 Mirror Gp-Rear View -Exterior
| 11***45 | Mirror Group-Rear View; -Exterior | 1 |
| 11***46 | Stay As; (Rh) | 1 |
| 11***47 | Stay As; (Lh) | 1 |
160-6171 Mirror Gp-Rear View -Exterior
| 12***20 | Mirror As | 2 |
| 12***21 | Bracket Assem. (L.H.) | 1 |
| 12***22 | Bracket Assem. (R.H.) | 1 |
107-4642 Mirror Gp-Rear View -Exterior
| 10***42 | Mirror Group-Rear View; -Exterior | 1 |
| 12***21 | Bracket Assem. (L.H.) | 1 |
| 12***22 | Bracket Assem. (R.H.) | 1 |
119-9757 Mirror Gp-Rear View -Exterior
| 11***57 | Mirror Group-Rear View; -Exterior | 1 |
| 11***70 | Stay As-Rh | 1 |
| 11***71 | Stay As-Lh | 1 |
147-7969 Motor Gp-Window Wiper -24-Volt
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***69 | Motor Group-Window Wiper; -24-Volt | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
118-6291 Motor Gp-Window Wiper -Front
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***91 | Motor Group-Window Wiper; -Front | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
118-6290 Motor Gp-Window Wiper -Rear
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***90 | Motor Group-Window Wiper; -Rear | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
147-7970 Motor Gp-Window Wiper -24-Volt
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***70 | Motor Group-Window Wiper; -24-Volt | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
134-5560 Motor Gp-Window Wiper -Front
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***60 | Motor Group-Window Wiper; -Front | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
134-5559 Motor Gp-Window Wiper -Rear
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***59 | Motor Group-Window Wiper; -Rear | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
107-4647 Mounting Gp-Cab
| 10***47 | Mounting Group-Cab | 1 |
| 12***95 | Cover As | 1 |
| 6Y***25 | Sleeve-Rops | 4 |
117-9835 Operator Ar-Enclosed Rops
| 10***14 | Cab Ar-Enclosed Rops | 1 |
| 10***30 | Lines Group-Cab Heater | 1 |
| 11***14 | Extension Group-Exhaust; -Short | 1 |
117-9836 Operator Ar-Enclosed Rops
| 10***30 | Lines Group-Cab Heater | 1 |
| 10***50 | Cab Ar-Enclosed Rops | 1 |
| 11***32 | Compressor & Mtg Group-Refrig | 1 |
118-0805 Operator Ar-Open Rops
| 10***15 | Canopy Ar-Open Rops | 1 |
| 11***15 | Extension Group-Exhaust; -Long | 1 |
| 11***05 | Operator Ar-Open Rops | 1 |
108-8421 Pan Gp-Backrest -Lumbar
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
| 10***23 | Shaft As-Lumbar | 1 |
| 10***24 | Pan-Lumbar | 1 |
8y-5992 Pan Gp-Seat
| 3K***97 | Pin 3.18 mm(.125 In.) Diameter | 4 |
| 6V***56 | Ring-Retaining | 2 |
| 8Y***92 | Pan As-Seat; (Bottom) | 1 |
107-4619 Panel Gp-Instrument
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***16 | Plug | 1 |
| 10***19 | Panel Group-Instrument | 1 |
118-0806 Panel Gp-Instrument
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
| 10***43 | Seal; (32-cm Each) | 0 |
107-4620 Panel Gp-Instrument
| 06***91 | Terminal-Blade; (14-Ga To 18-Ga) | 4 |
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 10***40 | Switch As-Magnetic; (Main Power Relay) | 1 |
176-7596 Panel Gp-Instrument
| 06***91 | Terminal-Blade; (14-Ga To 18-Ga) | 10 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
174-9730 Pedal Gp-Brake
| 10***56 | Pedal Assem.; (L.H.) | 1 |
| 11***32 | Pedal Assem.; (R.H) | 1 |
| 17***25 | Support As | 1 |
107-4627 Pedal Gp-Governor
| 10***27 | Pedal Group-Governor | 1 |
| 15***63 | Pedal Assem. | 1 |
| 17***76 | Governor Pedal Hardware Kit; (Consists Of U-Bolt, Clamp, Washer And Locknut) | 1 |
132-1362 Platform Ar
| 10***18 | Wiring Group-Cab | 1 |
| 10***20 | Panel Group-Instrument | 1 |
| 10***21 | Control Group-Parking Brake | 1 |
119-9818 Platform Gp
| 11***55 | Cover | 1 |
| 11***56 | Platform Group | 1 |
| 11***18 | Platform Group | 1 |
119-9756 Platform Gp
| 11***56 | Platform Group | 1 |
| 11***59 | Platform Assem. | 1 |
| 11***60 | Platform As | 1 |
117-9621 Platform Gp-Operator
| 10***56 | Pedal Assem.; (L.H.) | 1 |
| 11***32 | Pedal Assem.; (R.H) | 1 |
| 11***63 | Floorplate As | 1 |
219-2849 Platform Gp-Operator -Brake Pedal
| 17***30 | Pedal Group-Brake | 1 |
| 21***49 | Platform Group-Operator; -With Brake Pedals | 1 |
| 21***50 | Floorplate As | 1 |
133-8496 Roof Gp-Canopy
| 13***96 | Roof Group-Canopy | 1 |
| 4Y***46 | Washer; (13.5x38.0x3-mm Thk) | 12 |
| 4Y***48 | Spacer; (13.5x40x6-mm Thk) | 12 |
107-4616 Rops Gp-Enclosed
| 10***16 | Rops Group-Enclosed | 1 |
| 11***64 | Cab Group-Enclosed Rops | 1 |
| 11***21 | Platform Group-Operator | 1 |
107-4617 Rops Gp-Open
| 10***17 | Rops Group-Open | 1 |
| 11***21 | Platform Group-Operator | 1 |
| 11***55 | Cover | 1 |
118-7250 Screen Gp-Sun
| 11***50 | Screen Group-Sun; -Cab | 1 |
| 11***73 | Hook-Retainer | 2 |
118-0817 Seat & Mounting Gp
| 10***92 | Seat Group-Suspension | 1 |
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 4 |
| 11***17 | Seat & Mounting Group | 1 |
107-5978 Seat & Mounting Gp
| 10***78 | Seat & Mounting Group | 1 |
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
8y-3792 Seat Belt Gp -Retractable
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 1 |
| 8Y***92 | Seat Belt Group; -Retractable-Operator | 1 |
156-1148 Seat Belt Gp -Retractable
| 15***48 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 4D***32 | Locknut (7/16-20 Thd) | 1 |
129-7253 Seat Belt Gp -Retractable
| 12***53 | Seat Belt Group; -Retractable | 1 |
| 1J***98 | Bolt; (7/16-20x3.5-In) | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
109-1656 Seat Belt Gp -Retractable
| 10***56 | Seat Belt Group; -Retractable | 1 |
| 1J***98 | Bolt; (7/16-20x3.5-In) | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
122-4617 Seat Belt Gp -Retractable
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 4D***32 | Locknut (7/16-20 Thd) | 1 |
119-7128 Seat Gp -Cloth
| 11***28 | Seat Group | 1 |
| 15***48 | Seat Belt Group; -Retractable-Operator | 1 |
| 8Y***00 | Armrest Group | 1 |
118-0818 Seat Gp -Cloth
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 4 |
| 11***18 | Seat Group; -Cloth | 1 |
| 11***36 | Plate | 1 |
8y-6882 Seat Gp -Cloth, Lumbar
| 06***03 | Shim (.060mm Thk); (1.52-mm Thk) | 4 |
| 09***78 | Pin-Spring | 1 |
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
107-5977 Seat Gp -Cloth
| 10***77 | Seat Group; -Cloth | 1 |
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 4 |
| 11***36 | Plate | 1 |
8y-6977 Seat Gp-Suspension -Cloth, Lumbar
| 10***82 | Suspension Group-Seat; -Contour-Shock Absorber | 1 |
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 14***45 | Kit-Slider Block; (Suspension Seat) | 1 |
119-8264 Seat Gp-Suspension -Cloth
| 10***80 | Kit-Switch; (Seat Sensor) | 1 |
| 10***81 | Kit-Heater; (Seat) | 1 |
| 11***52 | Kit-Frame As; (Seat)(Seat) | 1 |
108-2192 Seat Gp-Suspension -Vinyl
| 10***92 | Seat Group-Suspension | 1 |
| 11***51 | Upper Assem. Kit; (Included Marked J) | 1 |
| 11***52 | Kit-Frame As; (Seat)(Seat) | 1 |
119-8263 Seat Gp-Suspension -Cloth
| 11***52 | Kit-Frame As; (Seat)(Seat) | 1 |
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
118-0819 Seat Gp-Suspension
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 2 |
| 11***19 | Seat Group-Suspension | 1 |
103-8527 Speaker Gp-Radio
| 10***27 | Speaker As-Radio | 1 |
107-6132 Speedometer Gp
| 10***32 | Speedometer Group | 1 |
| 12***37 | Lamp; (12-Volt) | 1 |
| 13***24 | Seal | 1 |
118-0808 Support Gp-Seat
| 11***08 | Support Group-Seat | 1 |
| 11***10 | Cover Assem. | 1 |
| 7X***79 | Washer-Hard; (8.8x25.5x2-mm Thk) | 11 |
150-7718 Suspension Gp-Seat -Air
| 10***17 | Bumper | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***57 | Shaft | 2 |
108-4082 Suspension Gp-Seat
| 10***03 | Fastener | 23 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
119-7027 Suspension Gp-Seat -Air
| 10***17 | Bumper | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***27 | Suspension Group-Seat; -Air | 1 |
8r-1774 Tank Gp-Window Washer
| 3W***98 | Cap; (Window Washer Tank Fill) | 1 |
| 3W***99 | Packing | 1 |
| 7T***90 | Pump As; (Washer) | 2 |
107-4641 Visor Gp-Cab
| 10***41 | Visor Group-Cab | 1 |
| 6V***32 | Nut-Weld (M6x6 Thd); (M10x1.5) (Weld) | 2 |
| 9R***03 | Plate | 2 |
117-9623 Washer Gp-Window
| 11***23 | Washer Group-Window | 1 |
| 11***60 | Bracket As | 1 |
| 12***44 | Bracket As | 1 |
130-3643 Window Gp
| 09***57 | Screw-Machine; (M5x0.8x5.2-mm) | 6 |
| 13***43 | Window Group; -Lh | 1 |
| 13***70 | Seal; (326-cm) | 0 |
180-2535 Window Gp-Door -Cab
| 13***70 | Seal; (326-cm) | 0 |
| 14***69 | Stop | 1 |
| 15***15 | Gasket | 1 |
107-4628 Wiper Gp-Window
| 10***42 | Wiper Pivot Group; (Front Window) | 1 |
| 10***28 | Wiper Group-Window | 1 |
| 11***69 | Arm As-Window Wiper; (Rear) | 1 |
101-0742 Wiper Pivot Gp
| 10***42 | Wiper Pivot Group; (Front Window) | 1 |
| 6A***18 | Washer; (8.1x12.5x1-mm Thk) | 1 |
| 6V***09 | Cap-Wiper | 1 |
Power Train
6d-0337 Valve Gp-Tire
| 2D***28 | Core-Valve | 1 |
| 2D***29 | Grommet | 1 |
| 2D***30 | Washer-Ring | 1 |
126-1568 Actuator Gp-Pump
| 11***42 | Nut; (M16x1.5-mm-Thd) | 1 |
| 11***44 | Seal-O-Ring | 4 |
| 12***68 | Actuator Group-Pump | 1 |
109-5499 Axle Ar-Fixed -Standard Differential, Front
| 10***29 | Gear Group-Bevel & Pinion | 1 |
| 10***17 | Differential Group | 1 |
| 10***99 | Axle Ar-Fixed; -Standard Differential, Front | 1 |
117-3632 Axle Ar-Fixed -Limited Slip Differential, Front
| 10***04 | Brake & Planetary Group | 2 |
| 11***17 | Housing Group-Fixed Axle | 1 |
| 11***32 | Axle Ar-Fixed; -Limited Slip Differential, Front | 1 |
151-6335 Axle Ar-Fixed -Front, Limited Slip Differential
| 11***17 | Housing Group-Fixed Axle | 1 |
| 11***05 | Gear Group-Bevel & Pinion | 1 |
| 11***25 | Differential Group-Limited Slip | 1 |
237-9222 Axle Ar-Fixed -Front, Limited Slip Differential
| 11***17 | Housing Group-Fixed Axle | 1 |
| 23***01 | Differential Group-Limited Slip | 1 |
| 23***04 | Brake & Planetary Group | 2 |
151-6328 Axle Ar-Fixed -Front, Standard Differential
| 10***29 | Gear Group-Bevel & Pinion | 1 |
| 10***17 | Differential Group | 1 |
| 11***17 | Housing Group-Fixed Axle | 1 |
117-3635 Axle Ar-Oscillating -Limited Slip Differential
| 10***35 | Drive Group-Hydrostatic | 1 |
| 10***04 | Brake & Planetary Group | 2 |
| 11***26 | Housing Group-Oscillating Axle | 1 |
140-0368 Axle Ar-Oscillating
| 10***04 | Brake & Planetary Group | 2 |
| 11***26 | Housing Group-Oscillating Axle | 1 |
| 11***48 | Gear Group-Bevel & Pinion | 1 |
109-5505 Axle Ar-Oscillating -Standard Differential, Rear
| 10***35 | Drive Group-Hydrostatic | 1 |
| 10***05 | Axle Ar-Oscillating; -Standard Differential, Rear | 1 |
| 14***58 | Axle Ar-Oscillating | 1 |
237-9219 Axle Ar-Oscillating
| 11***26 | Housing Group-Oscillating Axle | 1 |
| 21***68 | Gear Group-Bevel | 1 |
| 23***02 | Differential Group | 1 |
237-9221 Axle Ar-Oscillating -Rear, Limited Slip Differential
| 11***26 | Housing Group-Oscillating Axle | 1 |
| 21***64 | Gear Group-Bevel | 1 |
| 23***01 | Differential Group-Limited Slip | 1 |
151-6336 Axle Ar-Oscillating -Rear, Standard Differential
| 10***17 | Differential Group | 1 |
| 11***26 | Housing Group-Oscillating Axle | 1 |
| 11***16 | Gear Group-Bevel & Pinion | 1 |
140-0399 Axle Ar-Oscillating
| 10***01 | Planetary Group-Final Drive | 2 |
| 11***00 | Housing Group-Oscillating Axle | 1 |
| 11***48 | Gear Group-Bevel & Pinion | 1 |
140-0398 Axle Ar-Oscillating
| 10***17 | Differential Group | 1 |
| 10***01 | Planetary Group-Final Drive | 2 |
| 11***16 | Gear Group-Bevel & Pinion | 1 |
140-0358 Axle Ar-Oscillating
| 10***17 | Differential Group | 1 |
| 10***04 | Brake & Planetary Group | 2 |
| 11***26 | Housing Group-Oscillating Axle | 1 |
109-5503 Axle Ar-Oscillating -Standard Differential, Rear
| 10***36 | Drive Group-Hydrostatic | 1 |
| 10***03 | Axle Ar-Oscillating; -Standard Differential, Rear | 1 |
| 14***98 | Axle Ar-Oscillating | 1 |
151-6337 Axle Ar-Oscillating -Rear, Limited Slip Differential
| 11***26 | Housing Group-Oscillating Axle | 1 |
| 11***48 | Gear Group-Bevel & Pinion | 1 |
| 11***25 | Differential Group-Limited Slip | 1 |
109-5504 Brake & Planetary Gp
| 09***89 | Pin, Spring | 3 |
| 10***68 | Gear-Sun; (18-Teeth) | 1 |
| 10***69 | Gear-Planetary; (26-Teeth) | 3 |
152-2760 Brake & Planetary Gp
| 09***89 | Pin, Spring | 3 |
| 10***69 | Gear-Planetary; (26-Teeth) | 3 |
| 10***70 | Gear-Ring; (72-Teeth) | 1 |
237-9204 Brake & Planetary Gp
| 09***89 | Pin, Spring | 3 |
| 10***69 | Gear-Planetary; (26-Teeth) | 3 |
| 10***70 | Gear-Ring; (72-Teeth) | 1 |
107-4812 Cover Gp-Hydrostatic
| 10***47 | Cover As | 1 |
| 10***48 | Wall As | 1 |
| 10***12 | Cover Group-Hydrostatic | 1 |
237-9202 Differential Gp
| 10***18 | Pinion-Differential; (12-Teeth) | 4 |
| 10***22 | Washer-Thrust | 4 |
| 10***23 | Shaft | 1 |
109-4717 Differential Gp
| 10***17 | Differential Group | 1 |
| 10***18 | Pinion-Differential; (12-Teeth) | 4 |
| 10***19 | Gear-Differential; (20-Teeth) | 2 |
237-9201 Differential Gp-Limited Slip
| 10***18 | Pinion-Differential; (12-Teeth) | 4 |
| 10***22 | Washer-Thrust | 4 |
| 10***23 | Shaft | 1 |
118-5025 Differential Gp-Limited Slip
| 10***18 | Pinion-Differential; (12-Teeth) | 4 |
| 10***22 | Washer-Thrust | 4 |
| 10***23 | Shaft | 1 |
109-0536 Drive Gp-Hydrostatic
| 10***32 | Yoke As | 1 |
| 10***35 | Guard | 1 |
| 10***36 | Drive Group-Hydrostatic | 1 |
109-0535 Drive Gp-Hydrostatic
| 10***32 | Yoke As | 1 |
| 10***35 | Guard | 1 |
| 10***35 | Drive Group-Hydrostatic | 1 |
110-5165 Filter Gp-Oil -Power Train
| 11***65 | Filter Group-Oil; -Power Train | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
218-0768 Gear Gp-Bevel
| 10***02 | Lock-Bearing | 1 |
| 10***31 | Shaft-Bevel Pinion | 1 |
| 11***08 | Cone-Roller Bearing | 1 |
237-9205 Gear Gp-Bevel
| 10***34 | Yoke-Brake | 1 |
| 10***02 | Lock-Bearing | 1 |
| 23***05 | Gear Group-Bevel | 1 |
218-0764 Gear Gp-Bevel
| 10***02 | Lock-Bearing | 1 |
| 11***08 | Cone-Roller Bearing | 1 |
| 11***09 | Cone-Roller Bearing | 1 |
109-1029 Gear Gp-Bevel & Pinion
| 10***34 | Yoke-Brake | 1 |
| 10***29 | Gear Group-Bevel & Pinion | 1 |
| 10***02 | Lock-Bearing | 1 |
110-6116 Gear Gp-Bevel & Pinion
| 10***02 | Lock-Bearing | 1 |
| 11***16 | Gear Group-Bevel & Pinion | 1 |
| 11***08 | Cone-Roller Bearing | 1 |
118-4905 Gear Gp-Bevel & Pinion
| 10***34 | Yoke-Brake | 1 |
| 10***02 | Lock-Bearing | 1 |
| 11***05 | Gear Group-Bevel & Pinion | 1 |
118-4648 Gear Gp-Bevel & Pinion
| 10***02 | Lock-Bearing | 1 |
| 11***08 | Cone-Roller Bearing | 1 |
| 11***09 | Cone-Roller Bearing | 1 |
124-9847 Head Gp-Motor
| 03***39 | Seal-O-Ring (Id=9.25mm) | 6 |
| 10***16 | Seal-O-Ring | 2 |
| 12***86 | Valve; (Pilot) | 2 |
124-9911 Head Gp-Motor
| 03***39 | Seal-O-Ring (Id=9.25mm) | 2 |
| 10***16 | Seal-O-Ring | 2 |
| 12***94 | Plug; (Break Off) | 2 |
135-0785 Head Gp-Motor
| 03***39 | Seal-O-Ring (Id=9.25mm) | 6 |
| 09***74 | Bolt-Socket Head; (M12x1.75x65-mm) | 8 |
| 10***16 | Seal-O-Ring | 2 |
123-5742 Head Gp-Motor
| 03***39 | Seal-O-Ring (Id=9.25mm) | 6 |
| 09***74 | Bolt-Socket Head; (M12x1.75x65-mm) | 8 |
| 10***16 | Seal-O-Ring | 2 |
133-1858 Head Gp-Pump
| 12***17 | Plug | 1 |
| 12***56 | Cap | 1 |
| 12***24 | Valve Group-Relief; -Pressure Override | 1 |
126-1659 Head Gp-Pump
| 08***72 | Plug-O-Ring | 4 |
| 11***28 | Screw | 2 |
| 12***17 | Plug | 1 |
110-5417 Housing Gp-Fixed Axle
| 10***57 | Lever As | 1 |
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 2 |
| 11***17 | Housing Group-Fixed Axle | 1 |
117-3300 Housing Gp-Oscillating Axle
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 2 |
| 10***16 | Housing-Pinion | 1 |
| 11***19 | Shim Pack; (Includes 10 Shims) | 1 |
110-5426 Housing Gp-Oscillating Axle
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 2 |
| 10***16 | Housing-Pinion | 1 |
| 11***24 | Shaft-Axle | 2 |
112-4379 Lines Gp-Hydrostatic
| 06***51 | Clamp | 1 |
| 11***79 | Lines Group-Hydrostatic | 1 |
| 11***77 | Hose As | 1 |
111-4102 Lines Gp-Hydrostatic
| 11***02 | Lines Group-Hydrostatic | 1 |
| 11***40 | Elbow | 1 |
| 11***44 | Bracket As | 1 |
111-4097 Lines Gp-Hydrostatic
| 11***97 | Lines Group-Hydrostatic | 1 |
| 11***79 | Hose As | 1 |
| 11***59 | Hose As | 1 |
111-4100 Lines Gp-Hydrostatic
| 11***00 | Lines Group-Hydrostatic | 1 |
| 11***40 | Elbow | 1 |
| 11***44 | Bracket As | 1 |
148-6984 Lines Gp-Hydrostatic Pwr Case
| 06***51 | Clamp | 1 |
| 11***79 | Hose As | 1 |
| 11***80 | Hose As | 1 |
148-6980 Lines Gp-Hydrostatic Pwr Case
| 11***79 | Hose As | 1 |
| 11***59 | Hose As | 1 |
| 12***64 | Tube As | 1 |
110-3035 Lines Gp-Power Train Filter
| 11***29 | Bracket As | 1 |
| 11***35 | Lines Group-Power Train Filter | 1 |
| 11***65 | Filter Group-Oil; -Power Train | 1 |
148-2580 Lines Gp-Power Train Filter
| 11***29 | Bracket As | 1 |
| 11***65 | Filter Group-Oil; -Power Train | 1 |
| 12***69 | Hose As | 1 |
134-7307 Motor Gp-Piston -Hydrostatic
| 09***42 | Ring-Retaining | 1 |
| 12***54 | Setscrew; (M12x1.75-Thd) | 1 |
| 12***41 | Rotating Group-Motor | 1 |
117-2912 Motor Gp-Piston -Hydrostatic
| 11***24 | Setscrew-Socket; (M12x1.75-Thd) | 1 |
| 11***12 | Motor Group-Piston; -Hydrostatic | 1 |
| 12***54 | Setscrew; (M12x1.75-Thd) | 1 |
111-0363 Motor Gp-Piston -Hydrostatic
| 09***42 | Ring-Retaining | 1 |
| 11***63 | Motor Group-Piston; -Hydrostatic | 1 |
| 12***54 | Setscrew; (M12x1.75-Thd) | 1 |
111-0364 Motor Gp-Piston -Hydrostatic
| 11***64 | Motor Group-Piston; -Hydrostatic | 1 |
| 12***54 | Setscrew; (M12x1.75-Thd) | 1 |
| 12***09 | Rotating Group-Motor | 1 |
109-5500 Mounting Gp-Axle
| 10***00 | Mounting Group-Axle | 1 |
| 4E***60 | Plate | 1 |
| 7X***15 | Washer-Hard; (17x35x5-mm Thk) | 16 |
107-4831 Mounting Gp-Hydrostatic Pump
| 0T***24 | Bolt 9.525 mm(.375 In.) Dia. N. C. | 8 |
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 10***31 | Mounting Group-Hydrostatic Pump | 1 |
111-4668 Mounting Gp-Motor
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 8 |
| 10***15 | Adapter | 1 |
| 10***12 | Retainer | 1 |
111-4670 Mounting Gp-Motor
| 10***12 | Retainer | 1 |
| 11***13 | Gear; (44-Teeth) | 1 |
| 11***70 | Mounting Group-Motor | 1 |
111-4672 Mounting Gp-Motor
| 10***12 | Retainer | 1 |
| 11***11 | Gear; (13 & 37 Teeth) | 1 |
| 11***72 | Mounting Group-Motor | 1 |
109-5501 Planetary Gp-Final Drive
| 09***89 | Pin, Spring | 3 |
| 10***69 | Gear-Planetary; (26-Teeth) | 3 |
| 10***70 | Gear-Ring; (72-Teeth) | 1 |
107-4770 Power Train Ar
| 10***02 | Control Group-Service Brake | 1 |
| 10***70 | Power Train Ar | 1 |
| 10***31 | Mounting Group-Hydrostatic Pump | 1 |
107-4830 Power Train Ar
| 10***02 | Control Group-Service Brake | 1 |
| 10***30 | Power Train Ar | 1 |
| 10***31 | Mounting Group-Hydrostatic Pump | 1 |
126-2486 Pump Gp-Charge
| 11***96 | Key-Shaft | 1 |
| 12***77 | Bushing-Coupling | 1 |
| 12***86 | Pump Group-Charge | 1 |
127-5674 Pump Gp-Charge
| 12***86 | Pump Group-Charge | 1 |
| 12***74 | Pump Group-Charge | 1 |
| 12***77 | Plate-Wear | 1 |
111-0371 Pump Gp-Piston -Hydrostatic
| 08***01 | Plug As | 2 |
| 11***71 | Pump Group-Piston; -Hydrostatic | 1 |
| 12***98 | Rotating Group-Pump | 1 |
133-1333 Pump Gp-Piston -Hydrostatic
| 08***01 | Plug As | 2 |
| 11***49 | Fitting As; (Quick Disconnect) | 3 |
| 12***60 | Valve Group-Speed Sensing | 1 |
119-6627 Rim Ar
| 11***27 | Rim Ar | 1 |
| 11***33 | Rim Group-Demountable | 4 |
| 16***26 | Mounting Group-Rim | 1 |
133-4782 Rim Ar
| 13***82 | Rim Ar | 1 |
| 13***83 | Rim Group-Demountable | 4 |
| 16***26 | Mounting Group-Rim | 1 |
112-0969 Rim As
| 11***69 | Rim As | 1 |
119-6633 Rim Gp-Demountable
| 11***69 | Rim As | 1 |
| 11***48 | Valve As-Tire | 1 |
| 11***33 | Rim Group-Demountable | 1 |
133-4783 Rim Gp-Demountable
| 13***83 | Rim Group-Demountable | 1 |
| 13***84 | Rim Group-Demountable | 1 |
| 13***85 | Rim As | 1 |
123-5741 Rotating Gp-Motor
| 09***16 | Ring-Retaining; (External) | 1 |
| 11***19 | Screw-Special; (M5x0.8x8-mm) | 14 |
| 12***41 | Rotating Group-Motor | 1 |
124-9846 Rotating Gp-Motor
| 11***20 | Screw; (M6x20-mm) | 14 |
| 12***46 | Rotating Group-Motor | 1 |
| 12***51 | Barrel | 1 |
124-9909 Rotating Gp-Motor
| 09***29 | Ring; (Retaining) | 1 |
| 11***19 | Screw-Special; (M5x0.8x8-mm) | 14 |
| 12***64 | Shaft-Drive | 1 |
133-1849 Rotating Gp-Pump -Hydrostatic
| 11***70 | Ring-Retaining | 1 |
| 12***00 | Piston As | 9 |
| 12***01 | Spring Set | 1 |
126-1398 Rotating Gp-Pump
| 11***70 | Ring-Retaining | 1 |
| 12***98 | Rotating Group-Pump | 1 |
| 12***99 | Barrel As | 1 |
108-5731 Shaft Gp-Drive
| 10***31 | Shaft Group-Drive | 1 |
| 10***33 | Slip Joint Group | 1 |
| 4E***84 | Strap | 4 |
108-5733 Slip Joint Gp
| 10***33 | Slip Joint Group | 1 |
| 11***39 | Kit-Spider & Bearing | 2 |
| 1K***53 | Fitting (Pressure Relief) | 1 |
133-4781 Tire & Rim Ar
| 13***81 | Tire & Rim Ar | 1 |
| 13***82 | Rim Ar | 1 |
| 6C***66 | Tire; (17.5 R25*L-2) | 4 |
112-0963 Tire & Rim Ar
| 11***63 | Tire & Rim Ar | 1 |
| 11***27 | Rim Ar | 1 |
| 6C***48 | Tire; (15.5-R25) | 4 |
133-4778 Tire & Rim Ar
| 13***78 | Tire & Rim Ar | 1 |
| 13***82 | Rim Ar | 1 |
| 17***99 | Tire-Tubeless; (17.5-25) | 4 |
112-0966 Tire & Rim Ar
| 10***35 | Tire; (17.5-R25) | 4 |
| 11***66 | Tire & Rim Ar | 1 |
| 11***27 | Rim Ar | 1 |
112-0964 Tire & Rim Ar
| 11***64 | Tire & Rim Ar | 1 |
| 11***27 | Rim Ar | 1 |
| 12***50 | Tire-Tubeless; (17.5-25) | 4 |
112-3448 Tire & Rim Ar
| 11***48 | Tire & Rim Ar | 1 |
| 11***27 | Rim Ar | 1 |
| 6C***66 | Tire; (17.5 R25*L-2) | 4 |
112-0967 Tire & Rim Ar
| 11***67 | Tire & Rim Ar | 1 |
| 11***27 | Rim Ar | 1 |
| 6C***46 | Tire; (17.5-R25) | 4 |
112-0961 Tire & Rim Ar
| 11***61 | Tire & Rim Ar | 1 |
| 11***27 | Rim Ar | 1 |
| 6K***64 | Tire; (15.5-25) | 4 |
112-0965 Tire & Rim Ar
| 11***65 | Tire & Rim Ar | 1 |
| 11***27 | Rim Ar | 1 |
| 12***51 | Tire; (17.5-25) | 4 |
133-4779 Tire & Rim Ar
| 10***35 | Tire; (17.5-R25) | 4 |
| 13***79 | Tire & Rim Ar | 1 |
| 13***82 | Rim Ar | 1 |
112-0962 Tire & Rim Ar
| 10***97 | Tire; (15.5-R25) | 4 |
| 11***62 | Tire & Rim Ar | 1 |
| 11***27 | Rim Ar | 1 |
112-0960 Tire & Rim Ar
| 11***60 | Tire & Rim Ar | 1 |
| 11***27 | Rim Ar | 1 |
| 14***76 | Tire; (15.5-25) | 4 |
133-4777 Tire & Rim Ar
| 12***50 | Tire-Tubeless; (17.5-25) | 4 |
| 13***77 | Tire & Rim Ar | 1 |
| 13***82 | Rim Ar | 1 |
133-4780 Tire & Rim Ar
| 13***80 | Tire & Rim Ar | 1 |
| 13***82 | Rim Ar | 1 |
| 6C***46 | Tire; (17.5-R25) | 4 |
132-6115 Tire & Rim Gp
| 11***69 | Rim As | 1 |
| 11***48 | Valve As-Tire | 1 |
| 12***50 | Tire-Tubeless; (17.5-25) | 1 |
122-0315 Tire & Rim Gp
| 10***97 | Tire; (15.5-R25) | 1 |
| 11***69 | Rim As | 1 |
| 12***15 | Tire & Rim Group | 1 |
132-6113 Tire & Rim Gp
| 11***69 | Rim As | 1 |
| 11***48 | Valve As-Tire | 1 |
| 13***13 | Tire & Rim Group | 1 |
132-6119 Tire & Rim Gp
| 11***69 | Rim As | 1 |
| 11***48 | Valve As-Tire | 1 |
| 13***19 | Tire & Rim Group | 1 |
132-6117 Tire & Rim Gp
| 11***69 | Rim As | 1 |
| 11***48 | Valve As-Tire | 1 |
| 13***17 | Tire & Rim Group | 1 |
132-6112 Tire & Rim Gp
| 11***69 | Rim As | 1 |
| 11***48 | Valve As-Tire | 1 |
| 13***12 | Tire & Rim Group | 1 |
122-0316 Tire & Rim Gp
| 10***35 | Tire; (17.5-R25) | 1 |
| 11***69 | Rim As | 1 |
| 12***16 | Tire & Rim Group | 1 |
132-6114 Tire & Rim Gp
| 11***69 | Rim As | 1 |
| 11***48 | Valve As-Tire | 1 |
| 13***14 | Tire & Rim Group | 1 |
148-6930 Valve Gp-Pump Control -Hydrostatic
| 11***42 | Seal-O-Ring | 1 |
| 12***94 | Plug; (Break Off) | 1 |
| 12***17 | Plug | 1 |
126-1427 Valve Gp-Pump Control -Hydrostatic
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 2 |
| 11***42 | Seal-O-Ring | 1 |
| 12***94 | Plug; (Break Off) | 2 |
126-1424 Valve Gp-Relief -Pressure Override
| 11***18 | Seal-O-Ring | 1 |
| 12***91 | Seal-O-Ring | 1 |
| 12***24 | Valve Group-Relief; -Pressure Override | 1 |
6e-4402 Valve Gp-Relief -Charge Pressure
| 16***15 | Retainer-Spring | 1 |
| 18***10 | Screw | 1 |
| 20***42 | Spring | 1 |
107-3255 Valve Gp-Rotary -Creeper Control
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 1 |
| 10***55 | Valve Group-Rotary; -Creeper Control | 1 |
| 13***53 | Lever | 1 |
122-4973 Valve Gp-Solenoid
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
119-8994 Valve Gp-Solenoid & Manifold -Overspeed Control-Pump Pressure Override
| 11***94 | Valve Group-Solenoid & Manifold; -Overspeed Control-Pump Pressure Override | 1 |
| 12***27 | Manifold | 1 |
| 12***73 | Valve Group-Solenoid | 1 |
126-1460 Valve Gp-Speed Sensing
| 12***76 | Seal-O-Ring | 1 |
| 12***60 | Valve Group-Speed Sensing | 1 |
| 12***73 | Nut | 1 |
Service Equipment And Supplies
123-8032 Box Gp-Tool
| 10***54 | Box As-Tool | 1 |
| 12***32 | Box Group-Tool | 1 |
| 5P***20 | Trim-Edge .001 M (Order By The Meter) | 0 |
119-1032 Film Gp
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 0 |
| 11***32 | Film Group | 1 |
| 12***69 | Film-Identification; (Cat) | 1 |
121-4529 Plate & Film Gp
| 12***29 | Plate & Film Group | 1 |
| 12***49 | Film-Warning; (Universal)(Starting Procedure) | 1 |
| 13***85 | Film-Notice; (Push, Tow) | 1 |
121-4522 Plate & Film Gp
| 12***22 | Plate & Film Group | 1 |
| 12***42 | Film-Warning; (Universal) | 1 |
| 13***88 | Film-Notice; (Push, Tow) | 1 |
121-4531 Plate & Film Gp
| 10***76 | Plate-Warning; (No Clearance) | 2 |
| 12***31 | Plate & Film Group | 1 |
| 12***51 | Film-Warning; (Universal)(Quick Coupler, Radio, Ether) | 1 |
121-4523 Plate & Film Gp
| 12***23 | Plate & Film Group | 1 |
| 12***43 | Film-Warning; (Universal) | 1 |
| 13***89 | Film-Notice; (Push, Tow) | 1 |
121-4527 Plate & Film Gp
| 12***27 | Plate & Film Group | 1 |
| 12***47 | Film-Warning; (Universal)(Quick Coupler, Radio, Ether) | 1 |
| 13***83 | Film-Notice; (Push/Tow) | 1 |
121-4530 Plate & Film Gp
| 12***30 | Plate & Film Group | 1 |
| 12***50 | Film-Warning; (Universal) | 1 |
| 13***86 | Film-Notice; (Push, Tow) | 1 |
120-9777 Plate & Film Gp
| 11***32 | Film Group | 1 |
| 12***77 | Plate & Film Group | 1 |
| 4P***22 | Film-Warning; (No Ether Spray/Air Intake)(Symbol) | 2 |
121-4525 Plate & Film Gp
| 12***25 | Plate & Film Group | 1 |
| 12***45 | Film-Warning; (Universal)(Quick Coupler, Radio, Ether) | 1 |
| 13***91 | Film-Notice; (Push, Tow) | 1 |
120-9778 Plate & Film Gp
| 11***31 | Film; (Shipping) | 1 |
| 11***32 | Film Group | 1 |
| 12***78 | Plate & Film Group | 1 |
121-4528 Plate & Film Gp
| 12***28 | Plate & Film Group | 1 |
| 12***48 | Film-Warning; (Universal)(Starting Procedure) | 1 |
| 13***84 | Film-Notice; (Push, Tow) | 1 |
119-1264 Plate & Film Gp
| 11***25 | Film-Warning; (Universal) | 1 |
| 11***64 | Plate & Film Group | 1 |
| 13***71 | Film-Notice; (Push, Tow) | 1 |
121-4524 Plate & Film Gp
| 12***24 | Plate & Film Group | 1 |
| 12***44 | Film-Warning; (Universal)(Quick Coupler, Radio, Ether) | 1 |
| 13***90 | Film-Notice; (Push, Tow) | 1 |
155-2040 Plate & Film Gp
| 10***08 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***17 | Plate-Warning; (No Clearance) | 2 |
| 10***55 | Tag-Warning; (Steering Frame Lock) | 1 |
121-4526 Plate & Film Gp
| 12***26 | Plate & Film Group | 1 |
| 12***46 | Film-Warning; (Universal)(Quick Coupler, Radio, Ether) | 1 |
| 13***87 | Film-Notice; (Push, Tow)(Push/Tow) | 1 |
4y-9774 Plate & Film Gp
| 12***31 | Film-Warning; (Start Aid, Read Omm) | 1 |
| 12***61 | Plate-Registration | 1 |
| 12***55 | Film-Emission | 1 |
Steering System
149-4830 Pump Gp-Metering
| 10***76 | Kit-Spring | 1 |
| 10***77 | Spacer | 1 |
| 10***04 | Seal | 1 |
119-8768 Pump Gp-Metering
| 10***76 | Kit-Spring | 1 |
| 10***77 | Spacer | 1 |
| 10***04 | Seal | 1 |
113-1726 Pump Gp-Metering
| 10***76 | Kit-Spring | 1 |
| 10***77 | Spacer | 1 |
| 10***04 | Seal | 1 |
150-5405 Pump Gp-Metering
| 10***76 | Kit-Spring | 1 |
| 10***77 | Spacer | 1 |
| 10***04 | Seal | 1 |
107-4726 Cylinder & Mtg Gp-Steering
| 10***87 | Cylinder Group-Steering | 2 |
| 10***26 | Cylinder & Mtg Group-Steering | 1 |
| 10***31 | Pin As | 4 |
104-4187 Cylinder Gp-Steering
| 00***63 | Ring | 1 |
| 10***87 | Cylinder Group-Steering | 1 |
| 10***25 | Cylinder As | 1 |
150-9235 Lines Gp-Secondary Steering
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Valve Group-Secondary Steering | 1 |
| 11***14 | Hose As | 1 |
111-7493 Lines Gp-Secondary Steering
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***93 | Lines Group-Secondary Steering | 1 |
| 11***63 | Valve Group-Secondary Steering | 1 |
107-4818 Lines Gp-Steering
| 10***18 | Lines Group-Steering | 1 |
| 11***65 | Hose As | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
111-7481 Lines Gp-Steering
| 10***17 | Hose As | 2 |
| 11***81 | Lines Group-Steering | 1 |
| 11***68 | Valve Group-Priority | 1 |
150-9234 Lines Gp-Steering
| 15***34 | Lines Group-Steering | 1 |
| 15***00 | Hose As | 1 |
| 5P***66 | Clip(Slot); (Slot) | 1 |
149-4103 Lock Gp-Steering Cylinder
| 14***03 | Lock Group-Steering Cylinder | 1 |
| 14***17 | Sleeve-Steering Lock | 1 |
| 14***18 | Pin | 1 |
123-8867 Pump & Motor Gp-Sec Steering
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 12***66 | Pump | 1 |
| 12***67 | Pump & Motor Group-Sec Steering | 1 |
119-8357 Steering Ar
| 10***18 | Lines Group-Steering | 1 |
| 11***57 | Steering Ar | 1 |
| 11***68 | Pump Group-Metering | 1 |
111-4894 Steering Ar-Secondary
| 11***29 | Wiring Group-Secondary Steering | 1 |
| 11***94 | Steering Ar-Secondary | 1 |
| 11***93 | Lines Group-Secondary Steering | 1 |
204-7147 Steering Column Gp -Tilt
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 20***47 | Steering Column Group; -Tilt | 1 |
| 21***54 | Spring As-Gas; (Steering Column Tilt) | 1 |
112-9868 Valve Gp-Priority
| 11***68 | Valve Group-Priority | 1 |
| 11***92 | Plug As | 1 |
| 12***13 | Valve Group-Relief | 1 |
113-7863 Valve Gp-Secondary Steering
| 11***63 | Valve Group-Secondary Steering | 1 |
| 4T***47 | Plug As | 1 |
| 4T***48 | Spring | 1 |
Work Tools
100-7924 Tip Gp-Long
| 10***24 | Tip Group-Long | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
| 3G***27 | Tip Group-Long; Tip Gp(Ea Includes) | 8 |
9w-9642 Adapter Gp-Tip
| 1U***08 | Adapter-Strap; (Lh) | 1 |
| 1U***09 | Adapter-Strap; (Rh) | 1 |
| 2J***05 | Nut Rim To Adapter And Adapter To Wheel | 2 |
9w-8619 Edge Gp-Bit & Cutting
| 12***73 | Edge-Segment | 7 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 14 |
| 4F***27 | Bolt-Plow; (3/4-10x57.15mm) | 14 |
9w-8618 Edge Gp-Bit & Cutting
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 8 |
| 4F***27 | Bolt-Plow; (3/4-10x57.15mm) | 8 |
| 4T***14 | Edge-Cutting | 2 |
231-1458 Bucket Ar-Rock
| 11***57 | Bucket Group-Rock | 1 |
| 23***58 | Bucket Ar-Rock | 1 |
| 9W***18 | Bit & Cutting Edge Group | 1 |
128-1481 Bucket As-Penetration
| 12***81 | Bucket As-Penetration | 1 |
| 12***90 | Plate-Wear | 2 |
| 13***75 | Plate-Instruction | 1 |
128-1482 Bucket As-Penetration -Quick Coupler
| 11***13 | Plate As; (Rear, Rh) | 1 |
| 11***16 | Plate As; (Rear, Lh) | 1 |
| 12***82 | Bucket As-Penetration; -Quick Coupler | 1 |
112-1258 Bucket As-Penetration
| 11***58 | Bucket As-Penetration | 1 |
| 13***71 | Plate-Instruction | 1 |
| 5G***69 | Plate | 1 |
122-6096 Bucket Gp-General Purpose
| 12***96 | Bucket Group-General Purpose | 1 |
| 5G***06 | Plate (L.H.) | 1 |
| 5G***07 | Plate (R.H.) | 1 |
112-1256 Bucket Gp-General Purpose
| 11***56 | Bucket Group-General Purpose | 1 |
| 13***69 | Plate-Instruction | 2 |
| 5G***06 | Plate (L.H.) | 1 |
112-1257 Bucket Gp-Rock
| 11***57 | Bucket Group-Rock | 1 |
| 13***70 | Plate-Instruction | 1 |
| 5G***06 | Plate (L.H.) | 1 |
142-8463 Guard Gp-Bucket -Tooth Tip
| 10***43 | Plate As | 2 |
| 10***69 | Plate As | 1 |
| 14***63 | Guard Group-Bucket; -Tooth Tip | 1 |
149-5733 Retainer As
| 14***33 | Retainer As; (G.E.T.) | 1 |
914G serial number reference
On the Cat 914G (and its IT14G toolcarrier sibling) the PIN/serial plate is a riveted metal tag on the machine frame, typically on the left side ahead of the cab near the left front tire/frame rail, consistent with Cat's general compact/mid-size wheel loader PIN placement. A separate engine serial tag exists on the Cat 3054-family engine itself (e.g. a CRS-prefixed engine serial on later PDF-prefix machines) and should not be confused with the machine PIN. Pre-2001 machines show an 8-character PIN (3-letter/number prefix such as 7ZM, 9WM, 8ZM, 1WN, PDF, FWL or KZN followed by a 5-digit sequence, e.g. 7ZM00440); 2001-and-later Cat PINs move to the 17-character format (e.g. CAT0914G...00001) where the prefix is embedded within the longer string rather than standing alone. Earlier-run machines (7ZM/9WM/8ZM/1WN) use the Cat 3054T turbocharged diesel (~67 kW/90 hp net); later-run machines (PDF/FWL/KZN) use the Cat 3054C engine — confirm exact engine suffix and model-year-to-serial-range mapping with a Cat dealer if precision matters.
| Prefix | Identifies | Notes |
|---|---|---|
| 7ZM | 914G compact wheel loader, standard bucket configuration (earliest production run) | Serial prefix 7ZM, 914G Wheel Loader (Caterpillar SENR1278). Cat 3054T turbocharged diesel, approx. 67 kW / 90 hp net (2,200 rpm). |
| 9WM | 914G compact wheel loader, standard bucket configuration (second production run, follows 7ZM) | Serial prefix 9WM, 914G Wheel Loader (Caterpillar SENR1278). This range runs 9WM01013-and-up, sequentially following the earlier 9WM00001-01012 parts block; documented unit 9WM01533. Cat 3054T turbocharged diesel, approx. 67 kW / 90 hp net. |
| 8ZM | IT14G integrated toolcarrier configuration built on the 914G platform (paired production run with 7ZM) | Listed alongside 7ZM/9WM/1WN in Caterpillar's own media index (SENR1278), and independently sold as a standalone "Caterpillar IT14G Integrated Toolcarrier 8ZM" service/parts manual (parts manual serial range cited as 8ZM1-331/8ZM1-UP). This is the quick-coupler/toolcarrier variant of the 914G chassis, not the base loader model designation. Cat 3054T engine. |
| 1WN | IT14G integrated toolcarrier configuration built on the 914G platform (paired production run with 9WM) | Confirmed as "1WN" (not "1WM") via an eBay listing for a combined "CAT Caterpillar IT14G Parts Manual Book Catalog Toolcarrier Wheel Loader 1WN 8ZM" and parts-catalog cross-references (1WN001-659 paired with 8ZM1-331); a Caterpillar country-of-origin reference table also lists 1WN under IT14G, built in GB (UK). The earlier "1WM" reading found in one OCR'd index is superseded by this direct confirmation — dropped as a duplicate/erroneous alternate. Toolcarrier variant, not the base loader configuration. Cat 3054T engine. |
| 914G compact wheel loader, standard bucket configuration (later production run, post-dates 7ZM/9WM) | Serial prefix PDF, 914G Wheel Loader (PDF1-UP; examples PDF00511, PDF00965). Cat 3054C engine (engine prefix CRS1-UP). Later production than 7ZM/9WM. | |
| FWL | IT14G integrated toolcarrier configuration built on the 914G platform (later production run, pairs with PDF and KZN) | Serial prefix FWL, IT14G Integrated Toolcarrier (FWL00001-UP, Caterpillar manual). Cat 3054C engine. |
| KZN | IT14G integrated toolcarrier configuration built on the 914G platform (later production run, pairs with PDF/FWL) | Serial prefix KZN, IT14G Integrated Toolcarrier (KZN00001-UP, Caterpillar manual). Cat 3054C engine. |
Frequently asked questions
What engine does the Caterpillar 914G use?
The 914G runs Cat's 3054-series four-cylinder turbocharged diesel - the 3054T on earlier-production standard 914G and IT14G units, and the revised 3054C on later-production runs - producing roughly 67-75 kW (90-100 hp) depending on the specific build and rating standard cited. It is mechanically governed, with no engine ECM, and pairs with a two-range hydrostatic transmission rather than a torque converter.
What is the operating weight of the Caterpillar 914G?
Operating weight is typically cited between about 7,376 and 7,390 kg (16,262-16,300 lb), varying by source and by configuration - the standard 914G wheel loader versus the IT14G Integrated Toolcarrier with its quick-coupler and attachment set, so treat this as a range rather than a single fixed figure.
What replaced the Caterpillar 914G?
Cat replaced the 914G/IT14G with the 914G2, powered by the Cat C4.4 engine, and later moved to the Z-bar-linkage 914K. Note that Caterpillar has since reused the plain "914" model designation for a modern, unrelated small wheel loader built around the Cat C3.6 engine - a completely different platform that should not be confused with this legacy G-series machine.
What 914G owners discuss
What engine does the Cat 914G actually have, and is it the same as the newer machine also badged "914"?
Forum threads and spec sheets consistently tie the classic G-series 914G (and its IT14G integrated-toolcarrier sibling), launched around 1995, to the Cat 3054 family diesel, specifically the turbocharged direct-injection 3054T, mounted transversely at the rear of the machine for better balance and easier service access. Reported output varies by source and rating standard (gross vs. net, flywheel vs. published) — figures seen range roughly from 67 to 75 kW (about 90-100 hp) at 2300 rpm. This is a completely different machine from the modern small wheel loader that reuses the plain "914" model designation with a Cat C3.6 engine; owners researching parts or engine specs should confirm which platform they actually have before ordering anything, since the two share a model number but nothing else.
The 914G has a hi/lo range switch — why do owners report it getting stuck in low or not shifting at all?
The 914G's hydrostatic drive uses a two-range (hi/lo) transmission, giving roughly 35 km/h (about 22 mph) in high range versus a much lower top speed in low range. Community consensus across multiple forum threads points to the range-shift solenoid coil (mounted near the hydraulic tank) as the most common failure point — the coil burns out with age and heat, so the switch may show voltage in the cab but the solenoid never actually shifts. Recommended diagnosis is checking for consistent voltage at the solenoid plug and a proper ground/voltage signal difference between hi and lo positions before condemning the coil. A secondary, less common cause raised in the same discussions is a disconnected or faulty transmission output speed sensor, since both engine and transmission speed signals feed the ECM and can affect range engagement.
Some owners say the loader loses drive power or stalls out once it reaches operating temperature — what's the consensus?
This pattern is widely discussed as a classic symptom of a closed-loop hydrostatic drive system, not unique to the 914G but consistently reported on it: as hydraulic oil heats up and thins, marginal charge pressure that was masked when cold starts to collapse, causing sluggishness or a full stop in hot conditions. Forum diagnostic consensus is to verify charge pump pressure first before replacing any major component — check fluid level (low oil starves the charge pump), look for air ingestion, and isolate whether the pressure loss is in the drive pump/charge pump or in the wheel motors by disconnecting propel lines and testing each side independently. A worn charge relief valve or charge pump is a common root cause once contamination and low fluid are ruled out.
Why do some 914Gs blow a fuse or lose reverse when the operator shifts into reverse?
Multiple owners report the main/key fuse blowing specifically when shifting into reverse, and community troubleshooting narrows this to two likely culprits: a short in the reverse warning (back-up alarm) circuit, or a shorted solenoid on the pump/valve that engages reverse — the latter becoming more likely as the machine ages, since heat cycling degrades the solenoid coil's insulation over time. Because this circuit is tied to the reverse warning alarm that protects people working around the machine, any repair to this wiring should be pressure- and function-tested afterward, and it's worth having your dealer verify the fix restores full reverse alarm function before returning the machine to service.
What wear patterns show up in the axles, final drives, and articulation joint on these loaders?
As an articulated wheel loader/toolcarrier rather than a tracked machine, the 914G's equivalent "undercarriage" wear points are the axle/planetary final drives, tires, and the center articulation pin and bushings. Forum reports describe rear axle noise traced to metal flakes and a broken gear tooth found when the axle housing fluid was drained — a reminder that unusual axle whine warrants an early fluid-and-magnet check rather than waiting for a bearing to fail outright. Separately, general wheel-loader/toolcarrier maintenance consensus (echoed for the 914G's articulated frame) calls for greasing the center pivot pins every 8-10 hours of operation, shortened to roughly every 4 hours in wet or sandy conditions, since inadequate lubrication combined with dirt ingestion is the most commonly cited cause of premature pin and bushing wear.
Beyond the hi/lo solenoid, what other electrical or sensor gremlins come up with this model?
Owners and technicians point to the engine speed/timing sensor and the transmission output speed sensor as recurring trouble spots, since both feed signals to the ECM and an erratic or lost signal can cause rough running, unexpected loss of power, or a no-start/no-shift condition. Diagnostic consensus favors checking wiring continuity from the sensor connector back to the ECM and confirming a clean signal under load before condemning a sensor outright, since a shifted air gap from tone-ring wear or connector corrosion is a frequent culprit and much cheaper to fix than a sensor swap. As with any electronically-controlled drivetrain fault on an older machine, intermittent wiring and corroded grounds should be ruled out before replacing components.
What should a buyer check before purchasing a used Cat 914G?
Beyond the general used-equipment basics — confirming tires and ground-engaging tools still have meaningful life left, checking for any fluid leaking while the machine sits at rest and while running, inspecting hydraulic cylinder rods for scoring or pitting, and requesting maintenance/repair history from the seller — 914G-specific due diligence raised repeatedly in forum discussions includes: cycling the hi/lo range switch through a full speed test to confirm it actually shifts (a known solenoid weak point); listening for whining or grinding from the axles and, if possible, checking axle fluid for metal contamination; inspecting for non-factory wiring modifications around the transmission/servo valve area, since at least one documented case involved a previous owner's rewiring attempt masking the real fault; and verifying exactly which variant you're looking at (standard 914G, 914G Series II, or IT14G toolcarrier), since specs and componentry differ between them. Given the safety implications of a drivetrain or reverse-alarm fault discovered after purchase, have your dealer verify hydrostatic charge pressure and reverse-alarm function during a pre-purchase inspection rather than relying on a static walk-around alone.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 914G part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.