Caterpillarwheel-type loadercompact wheel loader
Caterpillar 908
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 908 is a compact, articulated, rubber-tired wheel loader built from roughly 1998 through the mid-2000s as part of Caterpillar's first compact wheel loader lineup alongside the 902 and 906. It carries a Cat 3054 naturally aspirated four-cylinder diesel on early production and a Cat 3044C turbocharged four-cylinder on later vintage-era production, so confirm the fitted engine from the machine's own plate rather than assuming one generation. Operating weight runs about 6,040 kg (13,288 lb) in typical configuration. Drive is a closed-loop, two-speed hydrostatic transmission feeding all four wheels through an articulated frame, with wet-disc brakes charged through a hydraulic accumulator circuit. Standard configuration pairs a Z-bar loader linkage with a hydraulically actuated hook-type quick coupler, and Caterpillar offered general-purpose, multi-purpose, light-material, side-dump, and high-dump buckets plus optional proportional auxiliary hydraulics for the coupler circuit.
Within this vintage nameplate the main running change is the engine: earlier production carries the naturally aspirated 3054, while the following vintage production block moved to the turbocharged 3044C, a genuine mid-production swap rather than a data conflict, so parts and tune specs vary by serial range. Everything downstream of the engine (hydrostatic drivetrain, Z-bar linkage, wet-disc/accumulator brakes, hook-style coupler) carries through both blocks largely unchanged. Caterpillar retired this platform for a full 906H/908H redesign around 2008, and newer K-series, M-series, and current Next Generation machines have since reused the bare 908 name again, so none of that later data applies here. In the used and parts market today this vintage 908 is valued as a simple, mechanically governed loader with no engine ECM to fail and a straightforward hydrostatic driveline; buyers should treat it as an older, thinly documented nameplate and always confirm engine and PIN block before ordering parts or trusting a listed spec.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 908 specifications
Engine
| Engine model | Cat 3054, 4-cylinder naturally aspirated diesel, on early production; Cat 3044C, 4-cylinder turbocharged diesel, on later production of this generation — a genuine mid-production running change. Both mechanically governed with mechanical fuel injection, no engine ECM. |
| Gross / net power | Gross 63 kW (84 hp); net 57 kW (76 hp) per ISO 9249, both at 2,600 rpm. Rating documented for the turbocharged 3044C; the earlier naturally aspirated 3054's output is not stated in surviving factory literature — confirm from the machine's plate. |
| Displacement, bore, stroke | About 3.3 L (203 in3) displacement. Bore 94 mm (3.7 in), stroke 120 mm (4.72 in). Documented for the 3044C; dimensions for the earlier 3054 are not confirmed in surviving literature. |
| Emissions tier | Meets the non-road emission standards in force at time of build. Mechanically governed diesel, no aftertreatment; exact tier not stated in surviving factory literature. |
Weights
| Operating weight | 6,040 kg (13,288 lb). Machine with full fuel tank, ROPS cab, operator, standard tires and general-purpose bucket. |
| Static tipping load, straight | 4,380 kg (9,636 lb), bucket. |
| Static tipping load, full turn | 3,760 kg (8,270 lb), bucket. |
Dimensions
| Wheelbase | 2,200 mm (7'3"). |
| Overall length | 5,500 mm (18'1"), general-purpose bucket on the ground. |
| Height to cab/ROPS | 2,770 mm (9'1"). |
| Standard tire size | 14.5-20. |
| Axle/frame oscillation | ±11 degrees via hitch between front and rear frames. |
Performance
| Travel speed | Two-speed hydrostatic transmission: low range 7 km/h (4 mph), high range 20 km/h (12 mph). Same forward and reverse. |
| Breakout force | 61 kN (13,710 lb), bucket. |
| Hydraulic lift capacity, maximum | 44 kN (9,900 lb). |
| Rated operating load, full turn | 1,880 kg (4,136 lb), bucket, per ISO 5998. |
| Hydraulic cycle times | Lift 4.5 sec, dump 2.4 sec, lower/float 3.2 sec, engine at high idle. |
| Loader hydraulic flow/pressure | Third-valve flow 83 L/min (21.6 gpm); main relief 235 bar (3,400 psi). |
Service capacities (summary)
| Fuel tank | 80 L (21 gal). |
| Hydraulic system, total | 66 L (17 gal). |
| Engine oil | 10 L (2.6 gal). |
| Cooling system | 22 L (5.8 gal). |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
908 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with oil filter) | 9.5-9.8 L (2.5-2.6 US gal). Applies to both the naturally aspirated Cat 3054 used on early production and the direct-injection turbo Cat 3044C used on later production of this machine. | Cat DEO or DEO-ULS diesel engine oil. SAE 15W-40 for standard/warm ambient ranges; SAE 10W-30 in cooler climates. Cat DEO-ULS synthetic blends cover the low-temperature end. |
| Cooling system | Approximately 17-22 L (4.5-5.8 US gal) for the full machine system; the bare engine jacket alone holds about 10.5 L (2.8 US gal). Total varies by radiator and piping configuration. | Cat ELC (Extended Life Coolant), glycol-based OAT formula, preferred. Cat DEAC conventional coolant is an acceptable lower-cost alternate. Do not mix coolant types. |
| Fuel tank | Approximately 79-80 L (21 US gal). | No. 2-D distillate diesel fuel meeting Cat's fuel specification. Use low-sulfur or ultra-low-sulfur diesel on emissions-compliant engines. Switch to a winter-blend or No. 1-D fuel in cold ambient conditions to prevent gelling. |
| Powertrain / transfer drive case | About 1.3-1.4 L (0.34-0.37 US gal) for the hydrostatic transfer drive housing. Some spec sheets show a separate, larger transmission figure near 9.8 L (2.6 US gal); this varies by source and configuration, confirm against the serial-specific manual. | Cat TDTO (Transmission/Drive Train Oil). SAE 10W in cold ambient conditions, SAE 30 for standard operating temperatures. |
| Front axle differential | 7.5-8 L (2.0-2.1 US gal). | Cat GO (Gear Oil), SAE 80W-90. |
| Rear axle differential | 7.5-8 L (2.0-2.1 US gal). | Cat GO (Gear Oil), SAE 80W-90. |
| Final drive, each wheel end | 0.8-1.5 L (0.2-0.4 US gal) per side. Figures vary by source; verify against the serial-specific manual before service. | Cat GO (Gear Oil), SAE 80W-90. |
| Hydraulic system, including tank | Approximately 64 L (17 US gal). Single-source figure; confirm against the serial-specific manual before service. | Cat HYDO Advanced hydraulic oil. Grade 20 in cold ambient conditions, Grade 30 for standard operating temperatures. Cat TDTO is an acceptable alternate where the hydrostatic drive circuit shares the reservoir with the implement hydraulics. |
| Grease (chassis lubrication points) | Spec only, no fixed reservoir volume. Applied per grease point on loader linkage, pins, and bushings. | Cat MPGM (Multipurpose Grease), NLGI Grade 2. Cat Ultra 5-Moly for high-load pin and bushing points subject to shock loading. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 908 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the 908 beyond the schedule
Predictive Maintenance & Fluid Analysis
This is a pre-ECM machine: the 3054/3044C has no engine controller and throws no fault codes, so scheduled oil sampling is the main early-warning tool. Pull S·O·S samples from the engine crankcase and the hydraulic/hydrostatic circuit at each oil change and watch for metal trending, since the pump and drive motor share one hydrostatic circuit and dirty oil hurts both at once. Track brake accumulator pre-charge and cut-in/cut-out pressure on a schedule rather than waiting for a soft pedal, and log coolant condition if running conventional DEAC instead of ELC.
Corrective & Common Repairs
Most reported failures trace to conventional causes, not electronics. A no-start or rough run on the mechanical-injection 3054/3044C usually means trapped air, a clogged filter, or worn injectors, not a sensor. A machine that cranks but won't shift range or direction is commonly a corroded connector at the shared hydrostatic-pump solenoid harness; check neutral-safety and park-brake interlock switches before condemning the pump. Jerky travel after a hose or filter service points to trapped air in the hydrostatic circuit needing a proper bleed.
Overhaul & Rebuild Points
Plan major work around three wear centers. The Z-bar loader linkage and center articulation pivot take the most cycles; check pin and bushing play with the bucket loaded before rebuilding, since skipped grease intervals accelerate wear fast on a machine this size. The wet-disc brake pack lives behind the accumulator circuit, so verify accumulator and charging-valve condition before opening the brakes themselves. On 3044C-equipped units, budget for turbocharger shaft-play inspection and seal replacement, a wear item the naturally aspirated 3054 doesn't have.
Seasonal & Environment Servicing
Switch to Cat DEO-ULS 10W-30 and HYDO Advanced 5W-20 before cold-weather work, and confirm the coolant mix protects to the expected low. Cold hydraulic oil can trip the hydraulic-filter bypass indicator at startup; let the system reach operating temperature before judging that light. In wet, sandy, or high-debris environments, shorten the articulation-pivot and loader-pin grease interval well below the standard 10-hour mark, and check the air-filter restriction indicator more often, since the primary element loads up faster in dusty ground.
908 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 147-0679 | Line As-Fuel Filter | Fuel system service | Check fitment → |
| 201-0878 | Kit-Fuel Filter | Fuel system service | Check fitment → |
| 151-2409 | Element-Water Separator | Fuel system service | Check fitment → |
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
908 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Coolant Temperature Warning Lamp | Engine coolant temperature has risen above the normal operating range. | Low coolant level, a blocked radiator core, a slipping or broken fan belt, a stuck thermostat, or sustained engine overload. | Reduce load and idle the engine to cool. Once safely shut down, check coolant level and radiator fins for debris before restarting. |
| Engine Oil Pressure Warning Lamp | Engine oil pressure has dropped below the safe minimum. | Low oil level, a worn oil pump, a clogged oil filter, or a failed oil pressure switch. | Shut the engine down immediately. Check oil level and filter condition before any restart; do not run the engine with this lamp lit. |
| Charging System Warning Lamp | The alternator is not supplying adequate charge to the battery. | A loose or worn alternator belt, worn brushes, a failed alternator, or a loose/corroded battery connection. | Check belt tension and battery terminals, then test alternator output; service or replace as needed. |
| Air Filter Restriction Indicator | The engine air intake filter is restricted beyond its allowable limit. | A dirty or clogged primary air filter element, typically from dusty operating conditions. | Inspect the element, clean or replace it, and reset the restriction indicator. |
| Hydraulic Filter Bypass Indicator | Hydraulic oil is bypassing a restricted filter element instead of flowing through it. | A clogged hydraulic filter, cold high-viscosity oil at startup, or contaminated hydraulic oil. | Let the oil reach operating temperature before judging the lamp; if it stays lit once warm, replace the hydraulic filter and check oil condition. |
| Hydrostatic Transmission Oil Temperature Warning | Hydrostatic drive oil temperature has exceeded the safe operating range. | Low transmission oil level, a clogged transmission filter, sustained transmission overload, or a faulty relief valve. | Reduce load and idle to cool the system, then check oil level, filter condition, and look for external leaks before resuming work. |
| Parking Brake Engaged Indicator | The park brake is applied, which blocks normal travel. | The brake was left engaged, or a brake switch/solenoid fault is holding it engaged. | Confirm the brake release control is fully released; if travel is still blocked, inspect the brake solenoid, switch, and wiring. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
908 attachments & work tools
General purpose bucket
Standard work tool for this class of compact wheel loader. Heaped capacity runs roughly 0.85-1.15 m3 (1.1-1.5 yd3) depending on the specific 908 configuration and bucket width. Mounts to the machine's factory quick-attach system for fast swaps.
Multi-purpose (4-in-1) bucket
Same coupler mount as the general purpose bucket, adds a clamshell jaw for light dozing, grading, clamping and material handling. Needs the machine's auxiliary hydraulic (3rd valve) circuit to actuate the jaw.
Light material bucket
Larger-volume bucket rated for low-density material such as mulch or topsoil, where bulk, not weight, is the limiting factor. Uses the same mount as the general purpose bucket.
Side dump bucket
Discharges material to one side instead of straight ahead. Used to meter bedding material into a trench or load a truck from a confined space alongside the machine.
High dump bucket
Gives extra dump clearance over truck side walls and hoppers versus the standard general purpose bucket. Suited to loading operations needing added dump height.
Stone / sieve bucket
Perforated screen-style bucket that separates fines from stone and debris while loading. Shares the same factory quick-attach mount as the other buckets in this lineup.
Material handling grapple bucket
General purpose style bucket fitted with a hydraulically clamping grapple top for brush, logs and irregular bulk material. Requires the auxiliary hydraulic circuit to operate the grapple.
Pallet forks
Class III rated fork carriage for this machine size, typically fitted with roughly 1.2 m (4 ft) tines. Mounts to the same factory coupler used for the buckets.
Angle broom / pickup sweeper
Offered for yard and site cleanup work. Hydraulically driven, so it draws off the machine's auxiliary hydraulic circuit rather than running off ground drive.
Snow / dozer blade
Straight blade or multi-position V-blade offered for snow pushing and light dozing. The V-blade adjusts to several plow angles for different jobs; the straight blade sets for height and angle.
Utility / nursery forks
Fork attachment sized for ball-and-burlap trees and potted nursery stock in landscaping and nursery work. Uses the machine's standard fork/bucket mount.
Coupler / mounting system
This vintage 908 uses a factory hydraulically actuated hook-type quick-attach coupler, not a modern ISO or skid-steer-style interface. An opposing-wedge design with check valves keeps the tool seated under load and allows tool changes from the cab.
Auxiliary hydraulics / hydraulic kit
Work tools needing hydraulic actuation (multi-purpose bucket, grapple, broom or sweeper) require the machine's factory auxiliary (3rd valve) circuit. Proportional auxiliary hydraulic control was an available factory option on this lineup for finer tool control.
Factory cab / canopy configuration
Offered with a ROPS canopy or one of several enclosed cab levels (standard, comfort, deluxe sound-suppressed and pressurized). Optional air conditioning, creeper control, eco-drain valves and an engine block heater were available factory options for this era.
All 908 assemblies by section
Every catalogued assembly group for the Caterpillar 908. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
156-7871 Air Cleaner Gp
| 14***47 | Pipe-Exhaust | 1 |
| 14***50 | Clamp-Muffler | 1 |
| 15***71 | Air Cleaner Group | 1 |
138-2231 Extension Gp-Exhaust -Tall
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
| 13***31 | Extension Group-Exhaust; -Tall | 1 |
| 6I***63 | Nut; (M10x1.15-Thd) | 3 |
142-1816 Flange Gp-Exhaust
| 11***23 | Fitting | 1 |
| 12***75 | Connector-Filter | 1 |
| 14***16 | Flange Group-Exhaust | 1 |
138-2225 Lines Gp-Air
| 12***75 | Flange | 1 |
| 13***25 | Lines Group-Air | 1 |
| 14***50 | Clamp-Muffler | 2 |
138-2226 Muffler Gp
| 06***58 | Clamp-Hose | 2 |
| 06***67 | Clip-Tube | 1 |
| 10***53 | Stud | 3 |
216-4961 Turbocharger Gp
| 06***67 | Clip-Tube | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 4 |
| 11***90 | Connection | 1 |
179-9528 Turbocharger Gp
| 16***86 | Housing As | 1 |
| 16***87 | Cartridge | 1 |
| 16***64 | Housing | 1 |
219-9544 Turbocharger Gp
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
| 13***47 | Spring | 1 |
| 14***20 | Seal-Umbrella | 1 |
216-4962 Turbocharger Gp
| 06***67 | Clip-Tube | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 4 |
| 11***90 | Connection | 1 |
Basic Engine
145-8504 Camshaft Gp
| 06***78 | Washer | 1 |
| 06***79 | Dowel | 1 |
| 06***99 | Bushing-Idler Gear | 2 |
133-9820 Cover Gp-Accessory Drive
| 06***10 | Washer | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
141-6149 Cover Gp-Accessory Drive
| 06***10 | Washer | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
179-9529 Cover Gp-Valve Mechanism
| 10***51 | Bolt; (M8x1.25x65-mm) | 1 |
| 10***49 | Hose; (Crankcase Breather) | 1 |
| 10***75 | Seal | 3 |
145-6688 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 1 |
209-5562 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
209-6725 Cylinder Block Gp
| 16***61 | Gasket-Cylinder Head | 1 |
| 16***20 | Pin | 2 |
| 16***54 | Cylinder Head Group | 1 |
145-6685 Cylinder Block Gp
| 06***08 | Plug | 1 |
| 11***40 | Housing As | 1 |
| 11***41 | Gasket | 1 |
152-2884 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
145-6852 Cylinder Head Gp
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 13***58 | Guide-Exhaust Valve | 4 |
163-9254 Cylinder Head Gp
| 15***55 | Adapter | 1 |
| 16***54 | Cylinder Head Group | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
147-2021 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 13***60 | Cap | 8 |
144-9951 Drain Gp-Engine Oil
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
| 14***51 | Drain Group-Engine Oil | 1 |
146-0180 Fastener Gp-Cylinder Head
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 6 |
| 10***31 | Flywheel As | 1 |
100-6321 Flywheel Gp
| 10***21 | Flywheel Group | 1 |
| 10***17 | Plug | 3 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
133-9466 Housing Gp-Flywheel
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 12***79 | Plug | 3 |
216-4935 Housing Gp-Flywheel
| 14***44 | Shield | 1 |
| 14***45 | Damper | 1 |
| 17***91 | Gasket-Cover | 1 |
145-8479 Housing Gp-Front
| 12***00 | Spacer | 2 |
| 14***49 | Plate-Lifting | 1 |
| 14***79 | Housing Group-Front | 1 |
148-9685 Lifting Gp-Engine
| 14***85 | Lifting Group-Engine | 1 |
| 6I***54 | Bolt; (M8x1.25x30-mm) | 2 |
| 6I***39 | Bolt; (M8x1.25x70-mm) | 1 |
179-1227 Mounting Gp-Alternator
| 14***23 | Support As | 1 |
| 15***41 | Mount As | 2 |
| 15***03 | Support As | 1 |
138-2223 Mounting Gp-Engine
| 13***23 | Mounting Group-Engine | 1 |
| 14***23 | Support As | 1 |
| 15***41 | Mount As | 2 |
179-1225 Mounting Gp-Fan Drive
| 17***25 | Mounting Group-Fan Drive | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
130-4654 Mounting Gp-Starting Motor
| 03***46 | Gasket | 1 |
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
179-9331 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 6 |
145-6690 Piston & Rod Gp
| 06***24 | Plug | 2 |
| 14***90 | Piston & Rod Group, Stem; Replaces 420561a1, Stem | 1 |
130-4648 Plug Gp-Cylinder Block
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 13***48 | Plug Group-Cylinder Block | 1 |
130-4647 Plug Gp-Cylinder Head
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 13***47 | Plug Group-Cylinder Head | 1 |
| 24***28 | Washer; (16.5x20.5x1.6-mm Thk) | 1 |
141-0728 Plug Gp-Engine
| 10***87 | Plug | 9 |
| 12***16 | Stud | 2 |
| 13***70 | Plug | 4 |
179-9531 Plug Gp-Engine
| 17***31 | Plug Group-Engine | 1 |
| 6I***01 | Block | 1 |
| 6I***02 | Pulley | 1 |
6i-0500 Pulley Gp-Crankshaft
| 00***06 | Ring-Retaining | 2 |
| 06***83 | Plug-Shaft End | 2 |
| 06***87 | Spring-Shaft | 2 |
145-8471 Valve Mechanism Gp
| 10***55 | Hose (400 cm) | 0 |
| 11***23 | Fitting | 1 |
| 12***75 | Connector-Filter | 1 |
Braking System
227-1092 Brake Gp-Parking -Mechanical Caliper
| 10***34 | Switch As-Limit; (Service Brake) | 1 |
| 11***84 | Bumper | 1 |
| 13***22 | Pad | 1 |
224-6907 Control Gp-Foot Brake
| 12***76 | Nut; (M14x1.5-Thd) | 2 |
| 14***48 | Cable As | 1 |
| 15***79 | Connector | 1 |
228-4978 Control Gp-Parking Brake
| 09***81 | Pin-Spring | 1 |
| 11***84 | Bumper | 1 |
| 13***22 | Pad | 1 |
138-0230 Control Gp-Parking Brake
| 09***23 | Pin-Cotter | 1 |
| 12***76 | Nut; (M14x1.5-Thd) | 2 |
| 13***30 | Control Group-Parking Brake | 1 |
137-7768 Control Gp-Parking Brake
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 2 |
| 13***68 | Control Group-Parking Brake | 1 |
| 13***31 | Lever As | 1 |
138-0232 Control Gp-Service Brake
| 09***16 | Hose As | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***32 | Control Group-Service Brake | 1 |
156-9878 Control Gp-Service Brake
| 09***22 | Boot | 1 |
| 15***78 | Control Group-Service Brake | 1 |
| 16***30 | Kit-Seal | 1 |
145-9956 Cylinder Gp-Master
| 14***87 | Seal-Piston | 1 |
| 14***92 | Seal-Lip Type | 1 |
| 14***93 | Seal-U-Cup | 1 |
Cooling System
161-2783 Connection Gp-Water
| 06***06 | Plug | 1 |
| 10***50 | Clamp-Hose | 6 |
| 10***19 | Clip | 1 |
139-2616 Cooler Gp-Engine Oil
| 10***73 | Bolt; (M10x1.5x60-mm) | 2 |
| 11***43 | Cooler As-Oil; (Engine) | 1 |
| 11***45 | Connector | 1 |
216-4937 Cooler Gp-Fltr Base & Eng Oil
| 13***40 | Fan As; (9-Blade) | 1 |
| 14***70 | Adapter | 1 |
| 21***37 | Cooler Group-Filter Base & Eng Oil | 1 |
138-2239 Fan Gp-Suction
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 10***71 | Bolt | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 3 |
179-6896 Pump Gp-Water
| 12***27 | Cap As-Radiator | 1 |
| 13***53 | Radiator As | 1 |
| 13***38 | Guard As | 1 |
138-2244 Radiator & Fan Gp
| 12***27 | Cap As-Radiator | 1 |
| 13***53 | Radiator As | 1 |
| 13***38 | Guard As | 1 |
149-3494 Recovery Gp-Coolant
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
Electrical And Starting System
105-2813 Alternator Gp-Charging
| 10***12 | Alternator Group-Charging*R | 1 |
| 10***13 | Alternator Group-Charging | 1 |
| 13***21 | Bolt-Hex Head; (M10x1.5x120mm) | 1 |
217-6334 Alternator Gp-Charging
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
215-1872 Alternator Gp-Charging
| 10***12 | Alternator Group-Charging*R | 1 |
| 17***08 | Circuit Breaker As; (60-Ampere) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
138-2222 Alternator Gp-Charging
| 10***13 | Alternator Group-Charging | 1 |
| 13***21 | Bolt-Hex Head; (M10x1.5x120mm) | 1 |
| 13***22 | Alternator Group-Charging | 1 |
157-1670 Alternator Gp-Charging
| 10***13 | Alternator Group-Charging | 1 |
| 15***70 | Alternator Group-Charging | 1 |
| 17***12 | Circuit Breaker As; (105-Ampere) | 1 |
105-2812 Alternator Gp-Charging
| 10***12 | Alternator Group-Charging*R | 1 |
| 11***57 | Pulley-Alternator | 1 |
| 11***59 | Frame As-Alternator | 1 |
166-6950 Battery & Wiring Gp
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
138-4935 Battery Gp -Standard Duty
| 13***20 | Box As-Battery | 1 |
| 13***21 | Clamp | 1 |
| 13***35 | Battery Group; -Standard Duty | 1 |
138-4936 Battery Gp -Heavy Duty
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***21 | Terminal-Blade; (18-Ga To 22-Ga) | 3 |
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
3e-7843 Control Gp-Position -Work Tool
| 12***04 | Element As-Jacket Water Heater | 1 |
| 13***13 | Kit-Seal; (Water Jacket) | 1 |
| 13***17 | Cap As-Dust | 1 |
141-7556 Control Gp-Electronic Filter
| 14***56 | Control Group-Electronic Filter | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
127-8605 Heater Gp-Jacket Water
| 12***03 | Heater Group-Jacket Water | 1 |
| 12***05 | Heater Group-Jacket Water | 1 |
| 9X***72 | Strap-Cable | 1 |
172-4450 Heater Gp-Jacket Water
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
127-8603 Heater Gp-Jacket Water
| 12***03 | Heater Group-Jacket Water | 1 |
| 12***06 | Element As-Jacket Water Heater | 1 |
| 12***09 | Cord As-Heater Element; -240-Volt | 1 |
172-4449 Heater Gp-Jacket Water
| 12***05 | Heater Group-Jacket Water | 1 |
| 17***49 | Heater Group-Jacket Water | 1 |
| 9X***72 | Strap-Cable | 1 |
199-4005 Installation Ar-Security
| 15***54 | Lens As; (Flood) | 1 |
| 15***55 | Body As | 1 |
| 16***56 | Bolt-Hex Head; (M8x1.25x30mm) | 1 |
152-8180 Lamp Gp-Flood -Suspended Mount
| 13***41 | Lamp Group-Head & Signal; -Dipped, Rh | 1 |
| 15***80 | Lamp Group-Flood; -Suspended Mount | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
174-6809 Lamp Gp-Head -With Signal, Lh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
174-6807 Lamp Gp-Head -With Signal, Rh
| 13***43 | Lamp Group-Head & Signal; -Dipped, Lh | 1 |
| 17***07 | Lamp Group-Head; -With Signal, Rh | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
174-6806 Lamp Gp-Head -With Signal, Lh
| 13***40 | Lamp Group-Head & Signal; -Dipped, Rh | 1 |
| 17***06 | Lamp Group-Head; -With Signal, Lh | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
174-6808 Lamp Gp-Head -With Signal, Lh
| 13***42 | Lamp Group-Head & Signal; -Dipped, Lh | 1 |
| 17***08 | Lamp Group-Head; -With Signal, Lh | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
104-5255 Lamp Gp-Head & Signal -Lh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***55 | Lamp Group-Head & Signal; -Lh | 1 |
| 13***38 | Lens As | 1 |
226-9935 Lamp Gp-Head & Signal
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***10 | Lamp; (12-Volt)(Miniature) | 2 |
| 22***35 | Lamp Group-Head & Signal; -Rh | 1 |
212-9357 Lamp Gp-Head & Signal -Rh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 2 |
| 10***49 | Lens As; (Headlight) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
3e-9382 Lamp Gp-Head & Signal -Rh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
138-4940 Lamp Gp-Head & Signal -Dipped, Rh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 13***38 | Lens As | 1 |
| 13***40 | Lamp Group-Head & Signal; -Dipped, Rh | 1 |
138-4942 Lamp Gp-Head & Signal -Dipped, Lh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 13***39 | Lens As | 1 |
| 13***42 | Lamp Group-Head & Signal; -Dipped, Lh | 1 |
138-4943 Lamp Gp-Head & Signal -Dipped, Lh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 2 |
| 10***49 | Lens As; (Headlight) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
212-9358 Lamp Gp-Head & Signal -Lh
| 10***55 | Lamp Group-Head & Signal; -Lh | 1 |
| 21***58 | Lamp Group-Head & Signal; -Lh | 1 |
138-4941 Lamp Gp-Head & Signal -Dipped, Rh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 0 |
| 13***39 | Lens As | 1 |
| 13***41 | Lamp Group-Head & Signal; -Dipped, Rh | 1 |
226-9934 Lamp Gp-Head & Signal
| 22***34 | Lamp Group-Head & Signal; -Lh | 1 |
| 3E***82 | Lamp Group-Head & Signal; -Rh | 1 |
144-9933 Lamp Gp-Panel Illumination
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***33 | Lamp Group-Panel Illumination; -Backlight | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
196-0030 Lamp Gp-Registration Plate
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***38 | Lens; (Rear) | 1 |
142-8634 Lamp Gp-Stop & Tail -Stop, Tail
| 14***34 | Lamp Group-Stop & Tail; -Stop, Tail | 3 |
| 15***31 | Reflector | 2 |
| 15***08 | Bracket | 2 |
159-3407 Lamp Gp-Stop & Tail
| 15***07 | Lamp Group-Stop & Tail | 1 |
| 9R***42 | Plug As | 1 |
| 9R***58 | Cord As | 1 |
128-6985 Lamp Gp-Warning Beacon -12-Volt, Amber
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 17***06 | Lamp Group-Head; -With Signal, Lh | 1 |
| 17***07 | Lamp Group-Head; -With Signal, Rh | 1 |
138-4912 Lighting Ar-Roading -Dipped, Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***12 | Lighting Ar-Roading; -Dipped, Lh | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 5 |
138-4911 Lighting Ar-Roading
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***55 | Lamp Group-Head & Signal; -Lh | 1 |
| 13***11 | Lighting Ar-Roading | 1 |
138-0204 Lighting Gp-Flood -4-Lamp, Cab
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***91 | Fuse; (15-Ampere) | 2 |
| 13***04 | Lighting Group-Flood; -4-Lamp, Cab | 1 |
180-6455 Lighting Gp-Flood -4-Lamp, Cab
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***91 | Fuse; (15-Ampere) | 2 |
| 13***84 | Switch As; (Floodlight) | 1 |
219-3267 Lighting Gp-Roading
| 10***50 | Switch As-Rocker; (Warning Beacon, Power Recep)(Warning Beacon) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
217-6201 Lighting Gp-Roading
| 20***45 | Strap-Cable | 2 |
| 21***57 | Lamp Group-Head & Signal; -Rh | 1 |
| 21***58 | Lamp Group-Head & Signal; -Lh | 1 |
138-4947 Lighting Gp-Warning Beacon
| 10***50 | Switch As-Rocker; (Warning Beacon, Power Recep)(Warning Beacon) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
206-8661 Lighting Gp-Warning Beacon
| 12***97 | Screw-Pan Head; (No 8-32x0.375-In) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 14***59 | Control As | 1 |
179-2122 Service Gp-Power Train -Hydrostatic
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 10***54 | Clip | 1 |
214-3611 Starting Aid Gp
| 14***39 | Starting Motor Group-Electric; -12-Volt | 1 |
| 21***11 | Starting Aid Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
152-7787 Starting Aid Gp -Lines
| 03***59 | Plug-Start | 1 |
| 12***56 | Washer | 1 |
| 15***87 | Starting Aid Group; -Lines | 1 |
112-1767 Starting Motor Gp-Electric
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***13 | Switch As; (Starting Motor)(12-Volt) | 1 |
143-0539 Starting Motor Gp-Electric -12-Volt
| 14***39 | Starting Motor Group-Electric; -12-Volt | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
7n-0718 Switch Gp-Disconnect -Battery
| 16***69 | Cable As | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
| 3E***20 | Plate-Instruction; (Battery) | 1 |
166-7490 Switch Gp-Disconnect
| 03***63 | Plug | 1 |
| 16***90 | Switch Group-Disconnect | 1 |
| 25***10 | Switch As-Pressure; (Engine Oil) | 1 |
137-2666 Switch Gp-Pressure
| 11***90 | Fuse; (10 Amp) | 1 |
| 13***66 | Switch Group-Pressure; -Engine Oil | 1 |
| 14***78 | Relay As; (12-Volt)(Differential Lock Sol Valve) | 1 |
138-4927 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***27 | Warning Group-Backup | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
216-8575 Wiring Gp-Air Conditioner
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***90 | Fuse; (10 Amp) | 14 |
| 11***91 | Fuse; (15-Ampere) | 1 |
177-9280 Wiring Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
230-6440 Wiring Gp-Cab
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
192-4074 Wiring Gp-Cab -Work Tool Positioner
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
236-8150 Wiring Gp-Cab
| 11***15 | Relay As; (12-Volt)(Junction Box) | 2 |
| 13***13 | Harness As | 1 |
| 13***14 | Cable As | 1 |
166-6949 Wiring Gp-Engine
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 2 |
192-4075 Wiring Gp-Positioner -Work Tool
| 11***90 | Fuse; (10 Amp) | 1 |
| 19***75 | Wiring Group-Positioner; -Work Tool | 1 |
| 8E***18 | Antenna Assem. | 1 |
138-0181 Wiring Gp-Radio
| 11***91 | Fuse; (15-Ampere) | 2 |
| 13***81 | Wiring Group-Radio | 1 |
| 13***88 | Switch As-Rocker; (Work Tool) | 1 |
138-4930 Wiring Gp-Work Tool
| 08***90 | Bolt; (M20x2.5x250-mm) | 8 |
| 13***83 | Plate | 2 |
| 13***30 | Wiring Group-Work Tool | 1 |
Engine Arrangement
212-3603 Engine Ar-Primary
| 10***21 | Flywheel Group | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
| 13***47 | Plug Group-Cylinder Head | 1 |
139-9582 Engine Ar-Primary
| 10***21 | Flywheel Group | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
| 13***47 | Plug Group-Cylinder Head | 1 |
136-9692 Installation Ar-Engine
| 11***67 | Starting Motor Group-Electric | 1 |
| 13***92 | Installation Ar-Engine | 1 |
| 13***21 | Separator Group-Water | 1 |
Frame And Body
151-5786 Conversion Ar-Roading
| 10***11 | Retainer As | 2 |
| 10***12 | Chain | 1 |
| 10***13 | Spring | 1 |
174-5608 Conversion Ar-Roading
| 13***11 | Lighting Ar-Roading | 1 |
| 13***27 | Warning Group-Backup | 1 |
| 14***54 | Mirror Group | 1 |
166-9416 Conversion Ar-Roading
| 13***11 | Lighting Ar-Roading | 1 |
| 13***27 | Warning Group-Backup | 1 |
| 14***65 | Handhold Group | 1 |
166-9415 Conversion Ar-Roading
| 13***12 | Lighting Ar-Roading; -Dipped, Lh | 1 |
| 14***54 | Mirror Group | 1 |
| 15***16 | Restrainer-Bucket | 1 |
180-4588 Conversion Ar-Roading
| 16***91 | Latch As-Handle | 1 |
| 18***88 | Conversion Ar-Roading | 1 |
| 20***71 | Door As; (Rh) | 1 |
151-5788 Conversion Ar-Roading
| 13***11 | Lighting Ar-Roading | 1 |
| 14***54 | Mirror Group | 1 |
| 15***88 | Conversion Ar-Roading | 1 |
207-8372 Door Gp-Access
| 14***79 | Hood Group | 1 |
| 20***72 | Door Group-Access | 1 |
207-8370 Door Gp-Access
| 16***91 | Latch As-Handle | 1 |
| 20***70 | Door Group-Access | 1 |
| 20***73 | Door As; (Lh) | 1 |
156-4476 Enclosure Ar-Hood
| 15***98 | Plate | 2 |
| 15***79 | Deflector | 2 |
| 15***76 | Enclosure Ar-Hood | 1 |
156-4473 Enclosure Ar-Hood
| 15***73 | Enclosure Ar-Hood | 1 |
| 16***85 | Hood Group | 1 |
| 16***65 | Suppression Ar-Sound | 1 |
154-6650 Extension Gp-Fender
| 15***50 | Extension Group-Fender | 1 |
| 21***85 | Bracket As | 1 |
| 8T***89 | Locknut; (M10x1.15-Thd) | 4 |
218-0182 Fender Gp -Lh
| 21***82 | Fender Group; -Lh | 1 |
| 21***85 | Bracket As | 1 |
| 8T***89 | Locknut; (M10x1.15-Thd) | 4 |
218-0183 Fender Gp -Rh
| 17***22 | Fender Group-Front | 1 |
| 17***24 | Fender Group-Front | 1 |
| 21***83 | Fender Group; -Rh | 1 |
174-5722 Fender Gp-Front
| 14***42 | Fender | 1 |
| 14***41 | Plate | 1 |
| 14***47 | Bracket As | 1 |
144-8038 Fender Gp-Front
| 14***42 | Fender | 1 |
| 14***38 | Fender Group-Front | 1 |
| 14***41 | Plate | 1 |
174-5724 Fender Gp-Front
| 17***24 | Fender Group-Front | 1 |
| 21***82 | Fender Group; -Lh | 1 |
| 21***83 | Fender Group; -Rh | 1 |
218-0181 Fender Gp-Front
| 13***64 | Bracket | 2 |
| 14***51 | Plate | 2 |
| 14***45 | Fender As; (Lh)(Lh) | 1 |
137-7766 Fender Gp-Rear
| 13***64 | Bracket | 2 |
| 13***66 | Fender Group-Rear | 1 |
| 14***51 | Plate | 2 |
137-7760 Frame Gp-Loader
| 13***60 | Frame Group-Loader | 1 |
| 13***68 | Plate | 1 |
| 13***74 | Bearing | 1 |
137-7762 Frame Gp-Rear
| 13***62 | Frame Group-Rear | 1 |
| 13***71 | Spacer; (14x74x16-mm Thk) | 2 |
| 15***58 | Corner; (Lh) | 1 |
143-9848 Guard Gp-Frame
| 14***48 | Guard Group-Frame | 1 |
| 16***58 | Baffle | 1 |
| 17***01 | Baffle | 1 |
187-7226 Guard Gp-Lines
| 14***32 | Bushing | 2 |
| 17***03 | Tube As | 2 |
| 18***26 | Guard Group-Lines | 1 |
148-7065 Handhold Gp
| 14***65 | Handhold Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 6 |
| 8T***91 | Bolt-Plt; (M10 X 1.5 X 16) | 6 |
226-5412 Hardware Gp-Loader Frame -Fender
| 11***33 | Washer; (11x50x6-mm Thk) | 1 |
| 13***67 | Shim; (2.35-mm Thk) | 1 |
| 13***71 | Plate | 1 |
137-7783 Hitch Gp-Articulating
| 11***33 | Washer; (11x50x6-mm Thk) | 1 |
| 13***83 | Hitch Group-Articulating | 1 |
| 13***67 | Shim; (2.35-mm Thk) | 1 |
219-4563 Hitch Gp-Articulating
| 14***60 | Hinge As; (Hood, Rh) | 2 |
| 14***66 | Bracket As | 1 |
| 14***22 | Striker-Latch | 1 |
161-7077 Hood Gp
| 14***60 | Hinge As; (Hood, Rh) | 2 |
| 14***66 | Bracket As | 1 |
| 14***22 | Striker-Latch | 1 |
146-0679 Hood Gp
| 14***79 | Hood Group | 1 |
| 15***53 | Insulation-Hood | 1 |
| 15***55 | Insulation-Hood | 1 |
161-7085 Hood Gp
| 12***52 | Latch Assem.; (Rh) | 1 |
| 12***27 | Handle As | 1 |
| 12***43 | Seal; (70-cm) | 0 |
173-4209 Hood Gp
| 11***04 | Plate | 2 |
| 12***87 | Hinge | 2 |
| 12***43 | Seal; (70-cm) | 0 |
168-7707 Installation Ar-Firewall
| 12***43 | Seal; (70-cm) | 0 |
| 14***96 | Hose-Radiator | 1 |
| 15***63 | Bracket As | 1 |
140-5948 Installation Ar-Firewall
| 11***04 | Plate | 2 |
| 12***87 | Hinge | 2 |
| 12***43 | Seal; (70-cm) | 0 |
155-9861 Installation Gp-Radiator
| 14***19 | Step As; (Lh)(Lh) | 1 |
| 14***20 | Step As; (Rh) | 1 |
| 15***61 | Installation Group-Radiator | 1 |
179-0797 Ladder Gp
| 17***97 | Ladder Group | 1 |
| 2T***51 | Hose As-Lube | 2 |
| 2T***42 | Hose As | 1 |
159-3087 Lines Gp-Grease
| 15***78 | Cable As | 1 |
| 15***79 | Pin As | 1 |
| 15***80 | Pin As | 1 |
154-4381 Link Gp-Steering Frame Lock
| 10***02 | Spacer | 2 |
| 15***81 | Link Group-Steering Frame Lock | 1 |
| 16***68 | Bracket | 1 |
205-1666 Mounting Gp-Registration
| 13***75 | Pin As-Hitch | 1 |
| 15***78 | Cable As | 1 |
| 20***66 | Mounting Group-Registration | 1 |
148-2270 Pin Gp-Hitch
| 14***70 | Pin Group-Hitch | 1 |
| 17***38 | Suppression Group-Sound; -Cab | 1 |
| 18***86 | Suppression Group-Sound; -Frame | 1 |
169-0365 Suppression Ar-Sound
| 15***86 | Insulation | 1 |
| 15***91 | Insulation | 1 |
| 16***65 | Suppression Ar-Sound | 1 |
177-4538 Suppression Gp-Sound -Cab
| 13***28 | Seal-Composite; (180-cm Each) | 0 |
| 15***88 | Insulation | 1 |
| 15***89 | Insulation | 3 |
180-9486 Suppression Gp-Sound -Frame
| 17***23 | Plate | 2 |
| 18***86 | Suppression Group-Sound; -Frame | 1 |
| 18***95 | Plate As | 2 |
190-0548 Suspension Gp-Rear
| 18***71 | Damper | 2 |
| 19***48 | Suspension Group-Rear | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
222-5598 Suspension Gp-Rear
| 22***98 | Suspension Group-Rear | 1 |
| 22***52 | Kit-Brake Repair; (Parking) | 1 |
| 22***53 | Kit-Lever; (Parking Brake) | 1 |
187-8472 Suspension Gp-Rear
| 17***23 | Plate | 2 |
| 18***37 | Plate | 2 |
| 18***39 | Plate As | 2 |
Fuel System
216-3797 Cable Gp-Governor Control
| 10***11 | Bracket | 1 |
| 11***56 | Ring-Backup | 2 |
| 12***92 | Rod End | 1 |
144-1564 Cable Gp-Governor Control
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
| 13***47 | Spring | 1 |
| 14***64 | Cable Group-Governor Control | 1 |
137-7773 Control Gp-Governor
| 03***47 | Ferrule | 1 |
| 03***14 | Nut; (7/16-In) | 1 |
| 06***98 | Nut; (3/8-24-Thd) | 2 |
214-3598 Filter & Lines Gp-Fuel
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
164-6602 Filter & Lines Gp-Fuel
| 03***47 | Ferrule | 1 |
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***81 | Nut; (7/16-24-Thd) | 2 |
138-3096 Filter Gp-Fuel
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 13***96 | Filter Group-Fuel | 1 |
130-4646 Fitting Gp-Fuel Lines
| 13***46 | Fitting Group-Fuel Lines | 1 |
| 14***86 | Plate | 1 |
| 14***62 | Film-Notice; (Fuel Pump) | 1 |
141-5780 Guard Gp-Fuel Injection Pump
| 14***80 | Guard Group-Fuel Injection Pump | 1 |
| 14***62 | Film-Notice; (Fuel Pump) | 1 |
| 21***38 | Plate | 1 |
217-4329 Guard Gp-Fuel Injection Pump -Fuel Injection Pump
| 08***18 | Sleeve-Tube; (5/16) | 1 |
| 11***08 | Tube | 1 |
| 14***69 | Tube | 1 |
137-7789 Lines Gp-Fuel
| 03***25 | Elbow | 1 |
| 06***64 | Fitting-Flared | 1 |
| 06***65 | Fitting-Brass | 1 |
139-7036 Pump Gp-Fuel Injection
| 03***25 | Elbow | 1 |
| 06***64 | Fitting-Flared | 1 |
| 06***65 | Fitting-Brass | 1 |
148-7107 Pump Gp-Fuel Injection
| 03***63 | Plug | 1 |
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
216-4933 Pump Gp-Fuel Injection
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 14***83 | Separator Group-Water | 1 |
| 15***72 | Plate | 1 |
149-2683 Separator Gp-Water
| 14***83 | Separator Group-Water | 1 |
| 15***78 | Block-Rubber | 1 |
| 15***70 | Strap As | 1 |
138-2221 Separator Gp-Water
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
137-7770 Tank & Mtg Gp-Fuel
| 10***56 | Hose (400cm); (400-cm) | 0 |
| 11***53 | Cap-Fuel | 1 |
| 13***70 | Tank & Mtg Group-Fuel | 1 |
156-7352 Tank Gp-Fuel
| 11***63 | Pulley-Alternator | 1 |
| 11***65 | Frame As-Alternator | 1 |
| 11***66 | Rotor As-Alternator | 1 |
Hydraulic System
144-8005 Accumulator Gp-Hydraulic -Charged-Pilot Oil
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
149-5532 Accumulator Gp-Hydraulic -Uncharged-Pilot Oil
| 14***32 | Accumulator Group-Hydraulic; -Uncharged-Pilot Oil | 1 |
152-4422 Cylinder Gp-Coupler
| 12***75 | Cylinder As; (Rh) | 1 |
| 15***22 | Cylinder Group-Coupler | 1 |
| 16***86 | Seal As-Buffer | 1 |
134-9838 Cylinder Gp-Hydraulic -Multipurpose Bucket
| 13***38 | Cylinder Group-Hydraulic; -Multipurpose Bucket, Steering | 1 |
| 18***13 | Seal As | 1 |
| 18***15 | Ring-Backup | 1 |
125-0373 Cylinder Gp-Hydraulic -Side Dump Bucket
| 12***73 | Cylinder Group-Hydraulic; -Side Dump Bucket | 1 |
| 13***39 | Cylinder As | 1 |
| 13***44 | Rod As | 1 |
164-9430 Cylinder Gp-Hydraulic
| 13***93 | Bearing | 2 |
| 14***39 | Seal-Buffer | 1 |
| 14***40 | Seal-U-Cup | 1 |
146-3625 Cylinder Gp-Lift
| 09***75 | Seal; (Id=56.70mm) | 1 |
| 09***81 | Seal-Buffer | 1 |
| 11***91 | Seal-Lip Type | 1 |
167-0049 Cylinder Gp-Tilt
| 10***39 | Plug As-Drain; (Hydraulic Tank) | 2 |
| 15***27 | Tube As-Drain | 1 |
| 16***92 | Clip | 2 |
147-1849 Drain Gp-Ecology -Fuel, Hydraulic
| 13***51 | Lines Group-Hydraulic Oil Cooler | 1 |
| 14***13 | Valve Group-Pilot; -Joystick | 1 |
| 14***14 | Valve Group-Pilot; -Auxiliary | 1 |
136-9689 Hydraulic Ar
| 13***89 | Hydraulic Ar | 1 |
| 14***13 | Valve Group-Pilot; -Joystick | 1 |
| 14***14 | Valve Group-Pilot; -Auxiliary | 1 |
230-6461 Hydraulic Ar-3 Valve
| 22***45 | Valve Group-Bank 3 | 1 |
| 22***03 | Lines Group-Pilot | 1 |
| 23***38 | Cover Group-Console | 1 |
230-6462 Hydraulic Ar-3 Valve -Electrohydraulic
| 19***89 | Valve & Lines Group-Solenoid; -Work Tool Positioner | 1 |
| 19***75 | Wiring Group-Positioner; -Work Tool | 1 |
| 19***90 | Positioner Group-Work Tool | 1 |
192-4888 Hydraulic Ar-3 Valve
| 14***13 | Valve Group-Pilot; -Joystick | 1 |
| 14***14 | Valve Group-Pilot; -Auxiliary | 1 |
| 14***19 | Lines Group-Pilot | 1 |
192-4887 Hydraulic Ar-3 Valve -Pilot Control
| 14***13 | Valve Group-Pilot; -Joystick | 1 |
| 14***14 | Valve Group-Pilot; -Auxiliary | 1 |
| 14***19 | Lines Group-Pilot | 1 |
230-6463 Hydraulic Ar-3 Valve -E/H, W/Work Tool Positioner
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***45 | Connector As | 2 |
| 14***67 | Elbow Group; (Each Includes) | 2 |
149-8889 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***89 | Lines Group-Bucket | 1 |
184-3185 Lines Gp-Bucket -Grapple
| 14***54 | Washer | 2 |
| 14***27 | Elbow | 1 |
| 14***65 | Elbow | 1 |
149-8887 Lines Gp-Bucket
| 14***45 | Connector As | 3 |
| 14***72 | Elbow Group | 1 |
| 14***87 | Lines Group-Bucket | 1 |
149-8888 Lines Gp-Bucket
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 14***45 | Connector As | 2 |
| 14***88 | Lines Group-Bucket | 1 |
148-7207 Lines Gp-Coupler
| 14***54 | Washer | 2 |
| 14***27 | Elbow | 1 |
| 14***65 | Elbow | 1 |
215-1843 Lines Gp-Coupler
| 14***85 | Tube As | 2 |
| 14***77 | Hose As | 1 |
| 14***11 | Bracket | 1 |
147-2476 Lines Gp-Cylinder -Lift/Tilt
| 14***85 | Tube As | 2 |
| 14***77 | Hose As | 1 |
| 14***76 | Lines Group-Cylinder; -Lift/Tilt | 1 |
156-6683 Lines Gp-Front
| 10***05 | Tee-O-Ring | 1 |
| 14***12 | Adapter As | 1 |
| 14***42 | Connector Group | 1 |
178-9412 Lines Gp-Hydraulic
| 09***44 | Elbow | 1 |
| 15***11 | Hose As | 1 |
| 15***12 | Hose As | 1 |
137-7753 Lines Gp-Hydraulic
| 13***53 | Lines Group-Hydraulic | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
151-2510 Lines Gp-Hydraulic Fan
| 14***18 | Connector As | 1 |
| 15***10 | Lines Group-Hydraulic Fan | 1 |
| 15***12 | Hose As | 1 |
137-7751 Lines Gp-Hydraulic Oil Cooler
| 13***51 | Lines Group-Hydraulic Oil Cooler | 1 |
| 14***85 | Tube As | 1 |
| 14***77 | Hose As | 1 |
147-2484 Lines Gp-Load Control Valve
| 14***85 | Tube As | 1 |
| 14***77 | Hose As | 1 |
| 14***84 | Lines Group-Load Control Valve | 1 |
149-2319 Lines Gp-Pilot
| 10***73 | Clip | 2 |
| 14***34 | Hose As | 2 |
| 14***35 | Hose As | 1 |
149-2318 Lines Gp-Pilot
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 10***73 | Clip | 2 |
| 14***34 | Hose As | 2 |
229-2003 Lines Gp-Pilot
| 14***34 | Plate As | 1 |
| 14***61 | Hose As | 1 |
| 14***56 | Valve Group-Cooler Bypass; -Hydraulic Oil | 1 |
147-2335 Lines Gp-Pump
| 14***34 | Plate As | 1 |
| 14***61 | Hose As | 1 |
| 14***56 | Valve Group-Cooler Bypass; -Hydraulic Oil | 1 |
148-7210 Lines Gp-Work Tool
| 14***10 | Lines Group-Work Tool | 1 |
| 16***04 | Kit-Seal | 1 |
212-8716 Motor Gp-Gear
| 16***06 | Pin | 2 |
| 17***03 | Plate-Cover; (Rh) | 1 |
| 17***04 | Plate-Cover; (Lh) | 1 |
154-9440 Motor Gp-Gear -Hydraulic Fan
| 15***40 | Motor Group-Gear; -Hydraulic Fan | 1 |
152-7590 Mounting Gp-Coupler Cylinder
| 14***83 | Pin As | 2 |
| 15***90 | Mounting Group-Coupler Cylinder | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
156-5232 Mounting Gp-Cylinder
| 15***32 | Mounting Group-Cylinder | 1 |
| 16***65 | Pin | 2 |
| 3B***17 | Cotter; (Pin) | 4 |
164-3887 Mounting Gp-Cylinder -Multipurpose Bucket
| 16***87 | Mounting Group-Cylinder; -Multipurpose Bucket | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
| 8T***56 | Bolt-Plt; (M12 X 1.75 X 35) | 2 |
147-2336 Mounting Gp-Hydraulic Pump
| 14***36 | Mounting Group-Hydraulic Pump | 1 |
| 19***61 | Clamp | 1 |
| 19***62 | Bracket As | 1 |
192-4890 Positioner Gp-Work Tool
| 14***89 | Kit-Seal | 1 |
| 19***90 | Positioner Group-Work Tool | 1 |
| 21***14 | Pump Group-Gear | 1 |
215-8174 Pump & Mtg Gp-Hydraulic
| 16***11 | Kit-Seal | 1 |
| 21***74 | Pump & Mtg Group-Hydraulic | 1 |
166-4089 Pump Gp-Gear -Implement, Steering, Hyd Fan
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Cap-Filler | 1 |
167-0510 Tank Gp-Hydraulic
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 12 |
| 13***56 | Seal-O-Ring | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
167-0509 Tank Gp-Hydraulic
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 12***67 | Cap-Filler | 1 |
| 13***56 | Seal-O-Ring | 1 |
217-8635 Tank Gp-Hydraulic
| 14***47 | Hose As | 1 |
| 14***99 | Hose As | 1 |
| 14***25 | Connector | 1 |
192-2789 Valve & Lines Gp-Solenoid -Work Tool Positioner
| 14***47 | Hose As | 1 |
| 14***99 | Hose As | 1 |
| 14***25 | Connector | 1 |
171-8777 Valve & Mtg Gp-Solenoid
| 15***48 | Valve Group-Solenoid | 1 |
| 16***69 | Orifice As | 1 |
| 17***75 | Valve Group-Solenoid | 2 |
220-3392 Valve & Mtg Gp-Solenoid
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 2 |
| 22***92 | Valve & Mtg Group-Solenoid; -Hydraulic Lockout | 1 |
| 22***98 | Valve Group-Solenoid | 1 |
176-1501 Valve & Mtg Gp-Solenoid
| 17***01 | Valve & Mtg Group-Solenoid | 1 |
| 17***58 | Manifold | 1 |
| 17***75 | Kit-Seal | 1 |
211-7758 Valve & Mtg Gp-Solenoid -Coupler
| 14***03 | Grommet | 1 |
| 19***15 | Valve Group-Solenoid; (Transfer Gear Output Mode) | 1 |
| 20***71 | Kit-Seal; (Solenoid Valve) | 1 |
233-7132 Valve & Mtg Gp-Solenoid -12-Vdc-Hydraulic Lockout
| 10***72 | Rod | 2 |
| 10***73 | Rod | 1 |
| 12***84 | Housing As-Inlet | 1 |
226-4781 Valve Gp-Bank 3 -3-Function, With Steering
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 10***91 | Seal Kit | 1 |
| 22***81 | Valve Group-Bank 3; -3-Function, With Steering | 1 |
223-7926 Valve Gp-Bank 3
| 12***84 | Housing As-Inlet | 1 |
| 15***36 | Housing; (End Cover) | 1 |
| 16***05 | Valve Group-Control; -Tilt | 1 |
223-7945 Valve Gp-Bank 3
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 10***91 | Seal Kit | 1 |
| 12***84 | Housing As-Inlet | 1 |
188-6041 Valve Gp-Bank 3
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 10***91 | Seal Kit | 1 |
| 12***84 | Housing As-Inlet | 1 |
9t-7634 Valve Gp-Check -Load
| 11***96 | Nut; (1/2) | 1 |
| 15***50 | Ring-Backup | 2 |
| 16***29 | Spring | 1 |
167-0705 Valve Gp-Control -Tilt
| 11***96 | Nut; (1/2) | 1 |
| 15***50 | Ring-Backup | 2 |
| 16***29 | Spring | 1 |
167-0706 Valve Gp-Control -Lift
| 16***29 | Spring | 1 |
| 16***06 | Valve Group-Control; -Lift | 1 |
| 1B***14 | Cap Screw--Pipe To Carburetor | 4 |
172-4144 Valve Gp-Control -Tilt
| 16***29 | Spring | 1 |
| 17***44 | Valve Group-Control; -Tilt | 1 |
| 1B***14 | Cap Screw--Pipe To Carburetor | 4 |
174-9627 Valve Gp-Control -Auxiliary
| 16***29 | Spring | 1 |
| 17***27 | Valve Group-Control; -Auxiliary | 1 |
| 1B***14 | Cap Screw--Pipe To Carburetor | 4 |
155-7535 Valve Gp-Control -Lift
| 11***06 | Cap-End | 2 |
| 15***35 | Valve Group-Control; -Lift | 1 |
| 16***29 | Spring | 1 |
229-2538 Valve Gp-Control
| 10***92 | Spring | 1 |
| 10***93 | Poppet | 1 |
| 14***26 | Fitting | 1 |
142-1656 Valve Gp-Cooler Bypass -Hydraulic Oil
| 14***56 | Valve Group-Cooler Bypass; -Hydraulic Oil | 1 |
| 14***10 | Plug As; (16.36mm Id) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
210-4924 Valve Gp-Drain
| 03***32 | Strap--Harness Assembly To Compressor | 1 |
| 13***24 | Rod-Control | 1 |
| 14***16 | Spacer | 1 |
141-9114 Valve Gp-Pilot -Auxiliary
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***14 | Valve Group-Pilot; -Auxiliary | 1 |
| 15***23 | Coil As | 1 |
141-9113 Valve Gp-Pilot -Joystick
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***82 | Boot | 1 |
| 14***13 | Valve Group-Pilot; -Joystick | 1 |
230-6449 Valve Gp-Pilot -Joystick, 3-Function
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***70 | Coil As | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
230-6453 Valve Gp-Pilot
| 03***21 | Ring-Back-Up | 1 |
| 03***79 | Seal-O-Ring (Id=10.82mm) | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
152-1814 Valve Gp-Pilot
| 03***32 | Strap--Harness Assembly To Compressor | 1 |
| 14***16 | Spacer | 1 |
| 15***14 | Valve Group-Pilot | 1 |
186-0913 Valve Gp-Relief -Tilt Dump-Line
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
188-0879 Valve Gp-Relief -Line
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
4z-5848 Valve Gp-Relief -Line
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
186-0912 Valve Gp-Relief -Line
| 03***79 | Seal-O-Ring (Id=10.82mm) | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 15***03 | Service Kit; (Consist Of Seal, Ring And Spring) | 1 |
222-6986 Valve Gp-Relief -Main
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***35 | Kit-Seal | 1 |
| 12***72 | Cartridge As | 1 |
171-8775 Valve Gp-Solenoid
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 17***75 | Valve Group-Solenoid | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
211-3545 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***49 | Nut-Special | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
223-0495 Valve Gp-Solenoid
| 09***41 | Seal-O-Ring (Id=80.00mm) | 4 |
| 11***37 | Washer; (46x70x1-mm Thk)(1mm`Thk) | 2 |
| 13***70 | Pin As | 2 |
185-4254 Valve Gp-Solenoid
| 0L***13 | Nut-Special; (1/2unf) | 1 |
| 17***75 | Kit-Seal | 1 |
| 18***54 | Valve Group-Solenoid; -Auxiliary | 1 |
159-0748 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***35 | Kit-Seal | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
Implements
139-1956 Control Gp-Work Tool
| 09***41 | Seal-O-Ring (Id=80.00mm) | 4 |
| 10***80 | Boss | 4 |
| 11***37 | Washer; (46x70x1-mm Thk)(1mm`Thk) | 2 |
Lubrication System
156-7870 Breather Gp
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 10***15 | Bolt | 3 |
145-8636 Pump Gp-Engine Oil
| 14***15 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
| 14***88 | Seal; (Housing, Regulator)(Temperature Regulator Housing) | 1 |
| 14***36 | Pump Group-Engine Oil | 1 |
Machine Arrangement
136-9686 Chassis Ar
| 13***86 | Chassis Ar | 1 |
| 13***60 | Frame Group-Loader | 1 |
| 13***62 | Frame Group-Rear | 1 |
136-9680 Common Ar
| 13***80 | Common Ar | 1 |
| 13***83 | Power Train Ar | 1 |
| 13***86 | Chassis Ar | 1 |
Operator Station
211-5870 Air Conditioner & Mounting Gp
| 21***70 | Air Conditioner & Mounting Group | 1 |
| 21***67 | Lines Group-Air Conditioner | 1 |
| 21***35 | Compressor Group-Refrigerant | 1 |
215-9484 Air Conditioner Ar
| 15***02 | Valve As; (Water) | 1 |
| 15***32 | Gasket | 1 |
| 15***22 | Seal | 1 |
218-0041 Air Conditioner Gp
| 13***49 | Door Group-Cab; -Fixed Window, Rh | 1 |
| 14***27 | Door Group-Cab; -Fixed Window, Lh | 1 |
| 14***29 | Window Group-Rear | 1 |
211-5871 Air Conditioner Gp
| 21***70 | Air Conditioner & Mounting Group | 1 |
| 21***71 | Air Conditioner Group | 1 |
| 21***74 | Condenser & Mtg Group-Refrigerant | 1 |
288-0889 Cab Ar
| 13***46 | Door Group-Cab; -Sliding Window, Lh | 1 |
| 13***49 | Door Group-Cab; -Fixed Window, Rh | 1 |
| 14***29 | Window Group-Rear | 1 |
288-0890 Cab Ar
| 11***81 | Adhesive; (All Joints To Be Sealed) | 1 |
| 13***43 | Cab As | 1 |
| 13***56 | Pin | 4 |
138-0242 Cab Gp-Enclosed Rops
| 11***81 | Adhesive; (All Joints To Be Sealed) | 1 |
| 13***42 | Cab Group-Enclosed Rops | 1 |
| 13***43 | Cab As | 1 |
242-0001 Cab Gp-Enclosed Rops
| 12***73 | Film-Identification; (Caterpillar) | 1 |
| 14***69 | Plug | 2 |
| 14***94 | Canopy As | 1 |
160-8600 Canopy Gp-Open Rops
| 12***73 | Film-Identification; (Caterpillar) | 1 |
| 14***69 | Plug | 2 |
| 15***14 | Plug | 5 |
235-9726 Canopy Gp-Open Rops
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 23***26 | Canopy Group-Open Rops | 1 |
217-6335 Compressor Gp-Refrigerant
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 15***87 | Grommet | 4 |
| 21***76 | Condenser Group-Refrigerant | 1 |
3e-1908 Compressor Gp-Refrigerant
| 1P***56 | Plate | 1 |
| 21***70 | Strap | 1 |
| 3E***08 | Compressor Group-Refrigerant | 2 |
211-5874 Condenser & Mtg Gp-Refrigerant
| 11***15 | Relay As; (12-Volt)(Junction Box) | 2 |
| 17***45 | Kit-Receptacle; (2-Pin) | 1 |
| 21***74 | Condenser & Mtg Group-Refrigerant | 1 |
211-5876 Condenser Gp-Refrigerant
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
| 14***44 | Tee Group; (Swivel) | 2 |
| 17***57 | Valve Group-Rotary; -Creeper Control | 1 |
195-4938 Control Gp-Creeper
| 15***72 | Kit-Receptacle; (2-Pin) | 1 |
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 15***53 | Grommet | 1 |
230-6446 Control Gp-Handle -Forward, Neutral, Reverse, Downshift
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***53 | Grommet | 1 |
208-6096 Control Gp-Handle -Forward, Neutral, Reverse, Downshift
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***53 | Grommet | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
230-6447 Control Gp-Handle
| 12***70 | Wheel As-Steering | 1 |
| 13***82 | Steering Column As | 1 |
| 14***77 | Knob; (Steering Column Tilt) | 1 |
208-6093 Control Gp-Handle -Direction, Downshift
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 15***53 | Grommet | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
138-0241 Control Gp-Steering -Adjustable
| 13***41 | Control Group-Steering; -Adjustable | 1 |
| 20***75 | Steering Column Group; -Adjustable | 1 |
| 8T***94 | Bolt-Socket Head; (M10x1.5x20-mm) | 4 |
144-9923 Control Gp-Steering -Fixed
| 14***23 | Control Group-Steering; -Fixed | 1 |
| 15***33 | Cover As | 1 |
| 16***91 | Edge-Trim | 1 |
151-0932 Cover Gp-Cab
| 15***32 | Cover Group-Cab | 1 |
| 23***34 | Panel Group-Instrument | 1 |
| 23***37 | Cover | 1 |
230-6438 Cover Gp-Console
| 13***87 | Cover | 1 |
| 13***74 | Panel Group-Instrument | 1 |
| 23***38 | Cover Group-Console | 1 |
230-6972 Cover Gp-Console
| 11***81 | Adhesive; (All Joints To Be Sealed) | 0 |
| 12***11 | Adhesive; (Urethane) | 0 |
| 13***62 | Glass As | 1 |
146-9028 Defroster Gp-Cab
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 1 |
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***28 | Handle As-Paddle | 1 |
138-0246 Door Gp-Cab -Sliding Window, Lh
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 1 |
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***28 | Handle As-Paddle | 1 |
138-0249 Door Gp-Cab -Fixed Window, Rh
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 1 |
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***77 | Latch As-Rotary; (Rh) | 1 |
138-0245 Door Gp-Cab -Sliding Window, Rh
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 1 |
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***77 | Latch As-Rotary; (Rh) | 1 |
146-9027 Door Gp-Cab -Fixed Window, Lh
| 08***29 | Hose Clip | 4 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 20 |
| 11***29 | Washer; (6.6x22x2-mm Thk) | 5 |
146-9026 Duct Gp-Cab Air
| 14***26 | Duct Group-Cab Air | 1 |
| 16***12 | Plate As | 1 |
| 16***13 | Plate As | 1 |
169-1986 Enclosure Gp-Cab
| 12***48 | Filter Element-Cab Air; (Cab Air) | 1 |
| 14***09 | Cover As | 1 |
| 15***14 | Filter Element-Cab Air | 1 |
147-0290 Filter Gp-Cab Air
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***90 | Switch As-Rotary; (24-Volt)(A/C, Heater Fan Control) | 1 |
| 11***92 | Fuse; (20 Amp) | 1 |
146-9034 Heater & Mtg Gp-Cab
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***90 | Switch As-Rotary; (24-Volt)(A/C, Heater Fan Control) | 1 |
| 11***92 | Fuse; (20 Amp) | 1 |
218-0088 Heater Ar-Cab
| 15***02 | Valve As; (Water) | 1 |
| 15***32 | Gasket | 1 |
| 15***34 | Case As | 1 |
138-0266 Heater Gp-Cab
| 13***66 | Heater Group-Cab | 1 |
| 15***02 | Valve As; (Water) | 1 |
| 15***32 | Gasket | 1 |
233-1651 Heater Gp-Cab
| 03***44 | Rivet (For Outside Japan); Rivet (For Outside Japan) | 4 |
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 11***19 | Bolt-Socket Head; (M4x0.7x25-mm) | 8 |
149-1296 Liner Gp-Cab -Open Rops
| 14***96 | Liner Group-Cab; -Open Rops | 1 |
| 16***51 | Insulation | 1 |
| 16***52 | Insulation | 1 |
160-4864 Liner Gp-Cab -Sound Suppression
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 11***33 | Switch As-Pressure; (A/C) | 1 |
138-0275 Liner Gp-Cab -Enclosed Rops
| 11***25 | Screw-Flat Head; (M6x1x25-mm) | 6 |
| 12***81 | Bolt-Socket Head; (M10x1.5x55-mm) | 1 |
| 13***85 | Cover As | 1 |
211-8467 Lines Gp-Air Conditioner
| 21***67 | Lines Group-Air Conditioner | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 4 |
149-0000 Lines Gp-Cab Heater
| 14***00 | Lines Group-Cab Heater | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 4 |
148-7054 Mirror Gp
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 14***54 | Mirror Group | 1 |
| 5P***15 | Washer-Mount 9w***75 Fuel Level Sensor | 2 |
162-3873 Mirror Gp-Rear View
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***34 | Gasket; (Indicator Module) | 1 |
| 16***73 | Mirror Group-Rear View | 1 |
144-9931 Module Gp-Warning Indicator
| 14***31 | Module Group-Warning Indicator; -Without Alarm | 1 |
| 15***41 | Mount As | 2 |
| 3E***83 | Sleeve | 4 |
144-9930 Module Gp-Warning Indicator -With Alarm, Function Lights
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 14***30 | Module Group-Warning Indicator; -With Alarm, Function Lights | 1 |
| 14***34 | Gasket; (Indicator Module) | 1 |
138-0197 Mounting Gp-Cab
| 13***97 | Mounting Group-Cab | 1 |
| 14***00 | Lines Group-Cab Heater | 1 |
| 17***44 | Operator Ar-Enclosed Rops; -Standard | 1 |
178-7846 Operator Ar-Enclosed Rops
| 16***86 | Enclosure Group-Cab | 1 |
| 17***24 | Fitting | 1 |
| 17***46 | Operator Ar-Enclosed Rops | 1 |
146-9035 Operator Ar-Enclosed Rops
| 14***35 | Operator Ar-Enclosed Rops | 1 |
| 14***00 | Lines Group-Cab Heater | 1 |
| 17***46 | Operator Ar-Enclosed Rops | 1 |
146-9030 Operator Ar-Enclosed Rops
| 14***30 | Operator Ar-Enclosed Rops | 1 |
| 14***00 | Lines Group-Cab Heater | 1 |
| 17***45 | Operator Ar-Enclosed Rops | 1 |
178-7844 Operator Ar-Enclosed Rops -Standard
| 13***81 | Wiring Group-Radio | 1 |
| 13***06 | Seat Group | 1 |
| 13***30 | Control Group-Parking Brake | 1 |
151-1177 Operator Ar-Enclosed Rops
| 13***81 | Wiring Group-Radio | 1 |
| 13***07 | Seat Group; -Vinyl | 1 |
| 13***30 | Control Group-Parking Brake | 1 |
178-7845 Operator Ar-Enclosed Rops
| 13***81 | Wiring Group-Radio | 1 |
| 13***06 | Seat Group | 1 |
| 13***30 | Control Group-Parking Brake | 1 |
148-7058 Operator Ar-Open Rops
| 14***58 | Operator Ar-Open Rops | 1 |
| 16***86 | Enclosure Group-Cab | 1 |
| 17***24 | Fitting | 1 |
178-7847 Operator Ar-Open Rops -Standard
| 13***07 | Seat Group; -Vinyl | 1 |
| 13***30 | Control Group-Parking Brake | 1 |
| 13***32 | Control Group-Service Brake | 1 |
178-7848 Operator Ar-Open Rops
| 10***16 | Plug | 1 |
| 10***56 | Plug; (Switch) | 5 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
151-0915 Operator Ar-Open Rops
| 13***07 | Seat Group; -Vinyl | 1 |
| 13***30 | Control Group-Parking Brake | 1 |
| 13***32 | Control Group-Service Brake | 1 |
138-0210 Panel Gp-Instrument
| 10***16 | Plug | 1 |
| 10***56 | Plug; (Switch) | 6 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
138-0274 Panel Gp-Instrument
| 09***79 | Plug | 1 |
| 10***69 | Switch As-Rocker; (Starting Aid) | 1 |
| 10***56 | Plug; (Switch) | 5 |
230-6434 Panel Gp-Instrument
| 09***81 | Pin-Spring | 1 |
| 11***84 | Bumper | 1 |
| 13***23 | Pad | 1 |
138-0238 Pedal Gp-Governor
| 13***38 | Pedal Group-Governor | 1 |
| 21***87 | Bracket | 1 |
| 21***06 | Receiver-Refrigerant Dryer | 1 |
149-0557 Roof Gp-Cab -Black
| 13***86 | Roof As; (Black) | 1 |
| 14***57 | Roof Group-Cab; -Black | 1 |
| 17***93 | Spacer; (14x19.5x9-mm) | 4 |
148-2734 Roof Gp-Cab -Yellow
| 14***34 | Roof Group-Cab; -Yellow | 1 |
| 14***59 | Roof Group-Cab; -Yellow | 1 |
148-2735 Roof Gp-Cab -Black
| 14***35 | Roof Group-Cab; -Black | 1 |
| 14***57 | Roof Group-Cab; -Black | 1 |
149-0559 Roof Gp-Cab -Yellow
| 13***87 | Roof As; (Yellow) | 1 |
| 14***59 | Roof Group-Cab; -Yellow | 1 |
| 17***93 | Spacer; (14x19.5x9-mm) | 4 |
236-8014 Seat Belt Gp
| 22***36 | Seat Belt Group; -Retractable | 1 |
| 23***14 | Seat Belt Group | 1 |
| 8S***26 | Bolt; (7/16-20x3-In) | 1 |
187-0437 Seat Belt Gp -2-Inch
| 13***89 | Seat Belt Group; -2-Inch | 1 |
| 18***37 | Seat Belt Group; -2-Inch | 1 |
225-0430 Seat Belt Gp
| 22***30 | Seat Belt Group | 1 |
| 23***15 | Seat Belt Group | 1 |
138-0289 Seat Belt Gp -2-Inch
| 13***89 | Seat Belt Group; -2-Inch | 1 |
| 1J***98 | Bolt; (7/16-20x3.5-In) | 2 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
236-8015 Seat Belt Gp
| 22***37 | Seat Belt Group; -Retractable | 1 |
| 23***15 | Seat Belt Group | 1 |
| 8S***26 | Bolt; (7/16-20x3-In) | 1 |
225-0429 Seat Belt Gp
| 22***29 | Seat Belt Group | 1 |
| 23***14 | Seat Belt Group | 1 |
187-0438 Seat Belt Gp -3-Inch
| 10***56 | Seat Belt Group; -Retractable | 1 |
| 18***38 | Seat Belt Group; -3-Inch | 1 |
109-1656 Seat Belt Gp -Retractable
| 10***56 | Seat Belt Group; -Retractable | 1 |
| 1J***98 | Bolt; (7/16-20x3.5-In) | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
138-0207 Seat Gp -Vinyl
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 4 |
| 13***07 | Seat Group; -Vinyl | 1 |
| 20***50 | Seat Group-Suspension; -Vinyl | 1 |
138-0206 Seat Gp
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 4 |
| 13***06 | Seat Group | 1 |
| 20***49 | Seat Group-Suspension | 1 |
201-9849 Seat Gp-Suspension
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
| 15***56 | Kit-Armrest; (Seat)(Rh) | 1 |
201-9850 Seat Gp-Suspension -Vinyl
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
| 15***56 | Kit-Armrest; (Seat)(Rh) | 1 |
143-8460 Seat Gp-Suspension -Vinyl
| 11***52 | Kit-Frame As; (Seat)(Seat) | 1 |
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
143-8459 Seat Gp-Suspension -Cloth
| 11***52 | Kit-Frame As; (Seat)(Seat) | 1 |
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
207-6865 Tank Gp-Window Washer
| 15***00 | Pump As | 2 |
| 20***59 | Cap | 1 |
| 20***65 | Tank Group-Window Washer | 1 |
143-7421 Visor Gp-Cab
| 14***21 | Visor Group-Cab | 1 |
| 6V***32 | Nut-Weld (M6x6 Thd); (M10x1.5) (Weld) | 2 |
| 9R***03 | Plate | 2 |
146-9029 Window Gp-Rear
| 11***81 | Adhesive; (All Joints To Be Sealed) | 1 |
| 12***11 | Adhesive; (Urethane) | 1 |
| 13***61 | Glass | 1 |
138-0251 Window Gp-Sliding -Rh
| 08***59 | Screw Self Tapper | 1 |
| 13***51 | Window Group-Sliding; -Rh | 1 |
| 14***87 | Cushion | 1 |
138-0250 Window Gp-Sliding -Lh
| 08***59 | Screw Self Tapper | 1 |
| 13***50 | Window Group-Sliding; -Lh | 1 |
| 14***87 | Cushion | 1 |
138-0296 Wiper & Washer Gp-Window
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***91 | Fuse; (15-Ampere) | 1 |
Power Train
142-1273 Valve Gp-Tire
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 40 |
| 14***73 | Valve Group-Tire | 1 |
| 14***19 | Tire & Rim Group; -Lh | 2 |
146-7651 Axle & Mtg Gp-Drive -Rear
| 09***33 | Ring; (Retaining) | 2 |
| 14***51 | Axle & Mtg Group-Drive; -Rear | 1 |
| 15***28 | Pad-Brake; (2 Required) | 2 |
137-7734 Axle & Mtg Gp-Drive -Front
| 08***90 | Bolt; (M20x2.5x250-mm) | 8 |
| 13***34 | Axle & Mtg Group-Drive; -Front | 1 |
| 13***83 | Plate | 2 |
137-7737 Axle & Mtg Gp-Drive -Rear
| 13***37 | Axle & Mtg Group-Drive; -Rear | 1 |
| 16***20 | Axle Group-Oscillating; -Rear, Standard Differential | 1 |
| 17***42 | Bolt-Socket Head; (M20x2.5-Thd) | 8 |
140-6435 Axle Gp-Fixed -Front, Limited Slip Differential
| 09***33 | Ring; (Retaining) | 2 |
| 14***35 | Axle Group-Fixed; -Front, Limited Slip Differential | 1 |
| 15***87 | Differential & Bevel Gear Group; -Limited Slip | 1 |
228-7775 Axle Gp-Fixed -Front, Limited Slip Differential
| 15***88 | Differential & Bevel Gear Group; -Limited Slip | 1 |
| 15***06 | Shaft As | 2 |
| 15***07 | Breather As; (Axle)(Axle) | 1 |
151-0927 Axle Gp-Oscillating -Rear, Limited Slip Differential
| 15***27 | Axle Group-Oscillating; -Rear, Limited Slip Differential | 1 |
| 15***06 | Shaft As | 2 |
| 15***07 | Breather As; (Axle)(Axle) | 1 |
163-4620 Axle Gp-Oscillating -Rear, Standard Differential
| 14***99 | Rim As | 1 |
| 14***00 | Rim As | 1 |
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 1 |
196-9820 Chart-Wheel & Tire
| 16***51 | Counterweight As | 4 |
| 19***20 | Chart-Wheel & Tire | 1 |
| 7X***50 | Bolt; (M12x1.75x110-mm) | 4 |
167-0950 Counterweight Gp-Axle
| 15***42 | Seal-Lip Type | 1 |
| 16***50 | Counterweight Group-Axle | 1 |
| 18***83 | Sealant-Gasket | 11 |
152-1187 Differential & Bevel Gear Gp -Limited Slip
| 13***05 | Bolt; (M6x1x18-mm) | 6 |
| 15***87 | Differential & Bevel Gear Group; -Limited Slip | 1 |
| 15***41 | Seal-Lip Type | 1 |
156-1576 Differential & Bevel Gear Gp -Standard
| 15***76 | Differential & Bevel Gear Group; -Standard | 1 |
| 20***10 | Gear-Bevel; (12-Teeth) | 4 |
| 21***92 | Washer-Thrust; (22x42x2-mm Thk) | 4 |
152-1188 Differential & Bevel Gear Gp -Limited Slip
| 13***05 | Bolt; (M6x1x18-mm) | 6 |
| 15***88 | Differential & Bevel Gear Group; -Limited Slip | 1 |
| 15***41 | Seal-Lip Type | 1 |
229-5628 Differential Gp
| 20***77 | Pinion-Bevel | 2 |
| 20***10 | Gear-Bevel; (12-Teeth) | 4 |
| 21***92 | Washer-Thrust; (22x42x2-mm Thk) | 4 |
209-4336 Differential Gp-Limited Slip
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 2 |
| 09***29 | Ring; (Retaining) | 1 |
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 2 |
249-4797 Drive Gp-Hydrostatic
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 2 |
| 09***29 | Ring; (Retaining) | 1 |
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 2 |
140-6434 Drive Gp-Transfer
| 13***47 | Filter Group-Oil; -Hydraulic, Power Train | 1 |
| 14***34 | Drive Group-Transfer | 1 |
| 14***40 | Bracket As | 1 |
233-7959 Filter & Lines Gp-Power Train
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 23***59 | Filter & Lines Group-Power Train | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
150-8659 Filter & Lines Gp-Power Train
| 13***47 | Filter Group-Oil; -Hydraulic, Power Train | 1 |
| 14***61 | Hose As | 1 |
| 14***41 | Connector Group | 1 |
137-7747 Filter Gp-Oil -Hydraulic, Power Train
| 13***47 | Filter Group-Oil; -Hydraulic, Power Train | 1 |
| 20***97 | Kit-Shim | 1 |
| 21***69 | Shim; (Collapsible) | 1 |
229-5625 Gear Gp-Bevel & Pinion
| 20***97 | Kit-Shim | 1 |
| 21***69 | Shim; (Collapsible) | 1 |
| 21***57 | Washer; (40x50x2-mm Thk) | 2 |
229-5626 Gear Gp-Bevel & Pinion
| 15***90 | Bracket As | 1 |
| 15***96 | Plate | 1 |
| 15***98 | Tube As | 1 |
137-7755 Lines Gp-Hydrostatic
| 10***16 | Seal-O-Ring | 2 |
| 10***98 | Bolt; (M4x65-mm Thk) | 8 |
| 12***49 | Seal-Shaft | 1 |
203-4143 Motor Gp-Piston -Hydrostatic
| 0T***24 | Bolt 9.525 mm(.375 In.) Dia. N. C. | 8 |
| 10***33 | . Pedestal, Flange-Nylon | 1 |
| 11***83 | Hub As-Coupling | 1 |
137-7743 Motor Gp-Piston
| 10***16 | Seal-O-Ring | 2 |
| 12***49 | Seal-Shaft | 1 |
| 12***50 | Shim; (1-mm Thk) | 1 |
138-2227 Mounting Gp-Hydrostatic Pump
| 13***27 | Mounting Group-Hydrostatic Pump | 1 |
| 1U***46 | Sealant (For Locations A) | 1 |
| 8T***93 | Bolt-Socket Hd; (Socket Head) (M16x2x60mm) | 4 |
147-2334 Mounting Gp-Motor
| 14***34 | Mounting Group-Motor | 1 |
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 1 |
| 15***40 | Seal-Lip Type | 1 |
162-7859 Planetary Gp-Final Drive
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 1 |
| 15***40 | Seal-Lip Type | 1 |
| 15***00 | Stud | 10 |
162-7860 Planetary Gp-Final Drive
| 13***34 | Axle & Mtg Group-Drive; -Front | 1 |
| 13***40 | Pump Group-Piston; -Hydrostatic | 1 |
| 13***43 | Motor Group-Piston | 1 |
136-9683 Power Train Ar
| 10***65 | Bolt-Socket Head; (M8x1.25x20-mm) | 6 |
| 11***96 | Key-Shaft | 1 |
| 12***94 | Ring-Centering | 1 |
147-8366 Pump Gp-Charge
| 08***72 | Plug-O-Ring | 1 |
| 10***98 | Bolt; (M4x65-mm Thk) | 8 |
| 11***49 | Fitting As; (Quick Disconnect) | 4 |
203-4140 Pump Gp-Piston -Hydrostatic
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 05***13 | Spider & Bearing Group | 2 |
| 14***89 | Shaft As | 1 |
137-7740 Pump Gp-Piston -Hydrostatic
| 08***72 | Plug-O-Ring | 1 |
| 11***49 | Fitting As; (Quick Disconnect) | 3 |
| 11***82 | Seal-O-Ring | 1 |
137-7749 Shaft Gp-Drive
| 13***49 | Shaft Group-Drive | 1 |
| 14***92 | Tire; (425/75r20) | 1 |
| 14***73 | Valve Group-Tire | 1 |
144-3419 Tire & Rim Gp -Lh
| 14***92 | Tire; (425/75r20) | 1 |
| 14***73 | Valve Group-Tire | 1 |
| 14***08 | Rim As | 1 |
144-3420 Tire & Rim Gp -Rh
| 14***20 | Tire & Rim Group; -Rh | 1 |
| 16***63 | Kit-Trunnion Bearing | 1 |
| 19***10 | Dowel | 2 |
152-1210 Trunnion Gp-Axle
| 15***10 | Trunnion Group-Axle | 1 |
154-9336 Valve Gp-Flushing
| 15***36 | Valve Group-Flushing | 1 |
| 20***48 | Solenoid | 1 |
203-4145 Valve Gp-Pump Control -Hydrostatic
| 16***15 | Retainer-Spring | 1 |
| 18***10 | Screw | 1 |
| 20***42 | Spring | 1 |
6e-4402 Valve Gp-Relief -Charge Pressure
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 1 |
| 17***58 | Lever | 1 |
| 3C***88 | Pin-Roll | 3 |
171-1457 Valve Gp-Rotary -Creeper Control
| 12***76 | Seal-O-Ring | 1 |
| 17***57 | Valve Group-Rotary; -Creeper Control | 1 |
159-9855 Valve Gp-Speed Sensing
| 14***78 | Valve Group | 1 |
| 15***55 | Valve Group-Speed Sensing | 1 |
222-5599 Wheel & Tire Gp
| 10***86 | Kit-First Aid | 1 |
| 10***44 | Plate-Warning; (Slow Moving Vehicle) | 1 |
| 10***27 | Film-Identification; (20-Km/H)(20 Kph) | 3 |
Service Equipment And Supplies
183-5943 Film Gp
| 17***80 | Film-Instruction; (Control Switch Bucket Lock) | 1 |
| 17***81 | Film-Instruction; (Control Switch Bucket Lock) | 1 |
| 18***00 | Film; (Blank) | 1 |
160-5736 Film Gp
| 12***74 | Film-Identification; (Cat) | 1 |
| 13***30 | Film-Stripe; (Stripe)(218cm) | 0 |
| 14***97 | Film; (908) | 2 |
188-6175 Kit-Preventive Maintenance
| 15***09 | Element-Water Separator; (Primary) | 1 |
| 15***02 | Filter Group-Fuel; (Primary) | 1 |
| 16***73 | Bottle Group-Fluid Sampling | 9 |
188-6174 Kit-Preventive Maintenance
| 15***09 | Element-Water Separator; (Primary) | 1 |
| 15***02 | Filter Group-Fuel; (Primary) | 1 |
| 16***73 | Bottle Group-Fluid Sampling | 2 |
165-5075 Plate & Film Gp -French
| 12***39 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***40 | Film-Warning; (Starting Procedure) | 1 |
| 16***75 | Plate & Film Group; -French | 1 |
165-5088 Plate & Film Gp -Russian
| 13***49 | Film-Warning; (Radiator Pressure) | 1 |
| 16***84 | Film-Warning; (Starting Procedure) | 1 |
| 16***88 | Plate & Film Group; -Russian | 1 |
165-5093 Plate & Film Gp -Finnish
| 10***18 | Plate-Warning; (No Clearance) | 2 |
| 13***90 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***88 | Film-Warning; (Starting Procedure) | 1 |
146-8864 Plate & Film Gp
| 14***35 | Film-Instruction; (Biodegradable Oil) | 1 |
| 14***64 | Plate & Film Group | 1 |
165-5077 Plate & Film Gp -Portuguese
| 12***43 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***77 | Film-Warning; (Starting Procedure) | 1 |
| 16***77 | Plate & Film Group; -Portuguese | 1 |
165-5090 Plate & Film Gp -Swedish
| 10***76 | Plate-Warning; (No Clearance) | 2 |
| 13***91 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***86 | Film-Warning; (Starting Procedure) | 1 |
165-5081 Plate & Film Gp -Greek
| 12***45 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***79 | Film-Warning; (Starting Procedure) | 1 |
| 16***81 | Plate & Film Group; -Greek | 1 |
165-5080 Plate & Film Gp -Danish
| 12***46 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***78 | Film-Warning; (Starting Procedure) | 1 |
| 16***80 | Plate & Film Group; -Danish | 1 |
165-5082 Plate & Film Gp -Dutch
| 12***44 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***80 | Film-Warning | 1 |
| 16***82 | Plate & Film Group; -Dutch | 1 |
180-7950 Plate & Film Gp
| 16***28 | Plate-Warning; (No Clearance) | 2 |
| 16***32 | Film-Warning; (Pressurized Cooling Sys) | 1 |
| 18***63 | Film-Warning; (Cable Connection) | 1 |
165-5078 Plate & Film Gp -German
| 12***41 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***39 | Film-Warning; (Starting Procedure) | 1 |
| 16***78 | Plate & Film Group; -German | 1 |
165-5092 Plate & Film Gp
| 10***17 | Plate-Warning; (No Clearance) | 2 |
| 13***48 | Film-Warning; (Radiator Pressure) | 1 |
| 16***87 | Film-Warning | 1 |
165-5073 Plate & Film Gp
| 12***06 | Film-Warning; (Next To Radiator Fill Cap) | 1 |
| 14***38 | Film-Warning; (Starting Procedure) | 1 |
| 16***73 | Plate & Film Group | 1 |
165-5076 Plate & Film Gp -Spanish
| 12***40 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***76 | Film-Warning; (Starting Procedure) | 1 |
| 16***76 | Plate & Film Group; -Spanish | 1 |
165-5086 Plate & Film Gp -Arabic
| 13***88 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***82 | Film-Warning; (Starting Procedure) | 1 |
| 16***86 | Plate & Film Group; -Arabic | 1 |
165-5079 Plate & Film Gp -Italian
| 12***42 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***41 | Film-Warning; (Starting Procedure) | 1 |
| 16***79 | Plate & Film Group; -Italian | 1 |
147-1426 Plate & Film Gp
| 14***26 | Plate & Film Group | 1 |
| 15***76 | Plate-Trademark | 1 |
| 16***36 | Film Group | 1 |
Steering System
146-5137 Cylinder Gp-Steering
| 14***87 | Seal-Piston | 1 |
| 14***92 | Seal-Lip Type | 1 |
| 14***93 | Seal-U-Cup | 1 |
218-4349 Cylinder Gp-Steering
| 11***74 | Seal | 1 |
| 13***21 | Hose As | 1 |
| 14***83 | Plate | 1 |
151-2847 Lines Gp-Steering
| 11***74 | Seal | 1 |
| 14***83 | Plate | 1 |
| 14***35 | Hose As; (Pressure) | 1 |
137-7787 Mounting Gp-Steering Cylinder
| 11***33 | Washer; (11x50x6-mm Thk) | 2 |
| 13***87 | Mounting Group-Steering Cylinder | 1 |
| 21***95 | Pin As | 2 |
238-9487 Pump Gp-Metering -Hmu
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 21***55 | Kit-Tilt Lever; (Steering Column) | 1 |
| 22***41 | Contact Kit | 1 |
144-7690 Pump Gp-Metering
| 14***90 | Pump Group-Metering | 1 |
206-6975 Steering Column Gp -Adjustable
| 20***75 | Steering Column Group; -Adjustable | 1 |
144-7689 Valve Gp-Priority
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
Work Tools
150-1571 Bucket Ar-General Purpose
| 13***22 | Tooth Group-Long | 7 |
| 15***53 | Bucket As-General Purpose | 1 |
| 15***71 | Bucket Ar-General Purpose | 1 |
150-8390 Bucket Ar-General Purpose
150-8389 Bucket Ar-General Purpose
| 13***05 | Bucket As-General Purpose | 1 |
| 14***99 | Tooth Group-Uni | 7 |
| 15***89 | Bucket Ar-General Purpose | 1 |
186-0153 Bucket Ar-Grapple -Grapple
186-0154 Bucket Ar-Grapple
152-2007 Bucket Ar-Light Material
150-6281 Bucket Ar-Multipurpose
152-2000 Bucket Ar-Multipurpose -High Dump
150-1362 Bucket Ar-Multipurpose
150-8392 Bucket Ar-Multipurpose
152-5216 Bucket Ar-Multipurpose -High Dump
150-8391 Bucket Ar-Multipurpose
141-4992 Bucket Ar-Multipurpose -High Dump
159-1586 Bucket Ar-Multipurpose
138-8916 Bucket Ar-Multipurpose
141-7265 Bucket Ar-Side Dump
152-2003 Bucket Ar-Side Dump
152-2004 Bucket Ar-Side Dump
152-2012 Bucket Ar-Stone Sieve
152-2013 Bucket Ar-Stone Sieve
138-8905 Bucket As-General Purpose
150-1353 Bucket As-General Purpose
150-6271 Bucket As-General Purpose
147-3153 Bucket As-Light Material
148-5386 Bucket As-Stone Sieve
186-0151 Bucket Gp-Grapple
150-6282 Bucket Gp-Multipurpose
141-4993 Bucket Gp-Multipurpose -High Dump
138-8915 Bucket Gp-Multipurpose
150-1359 Bucket Gp-Multipurpose
141-7268 Bucket Gp-Side Dump
195-1817 Carriage Gp-Fork
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 16***89 | Tack-Fastener | 4 |
138-8906 Carriage Gp-Fork
| 13***06 | Carriage Group-Fork | 1 |
| 17***72 | Film-Identification; (Bucket Level)(Bucket Level Indicator) | 2 |
| 17***77 | Pin | 2 |
169-4853 Coupler Gp-Quick
| 09***17 | Shim; (0.25-mm Thk) | 2 |
| 09***18 | Shim; (0.5-mm Thk) | 2 |
| 09***19 | Shim; (1.6-mm Thk) | 2 |
141-5004 Edge Gp-Cutting
| 13***25 | Edge-Cutting; (2080mm) | 1 |
| 14***04 | Edge Group-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 13 |
202-5483 Fork Gp-Pallet
| 09***37 | Service Group-Fork Positioner | 1 |
| 09***64 | Pin (Class Iii) | 1 |
| 09***45 | Washer; (16.6x24x1.2-mm Thk) | 1 |
138-8896 Fork Gp-Pallet
| 09***37 | Service Group-Fork Positioner | 1 |
| 09***64 | Pin (Class Iii) | 1 |
| 09***45 | Washer; (16.6x24x1.2-mm Thk) | 1 |
209-3477 Guard Gp-Bucket -Roading
| 10***11 | Retainer As | 2 |
| 10***12 | Chain | 1 |
| 10***13 | Spring | 1 |
140-6541 Plate Ar-Bucket
| 14***41 | Plate Ar-Bucket | 1 |
| 14***77 | Plate-Instruction; (Quick Coupler, Read Omm) | 1 |
| 14***13 | Plate As | 1 |
140-6542 Plate Ar-Bucket
| 14***42 | Plate Ar-Bucket | 1 |
| 14***77 | Plate-Instruction; (Quick Coupler, Read Omm) | 1 |
| 14***14 | Plate As | 1 |
7t-8202 Tip-Long
| 7T***46 | Tip-Long | 1 |
| 7T***47 | Tip-Long | 1 |
| 7T***02 | Tip-Long | 1 |
138-8922 Tooth Gp-Long
| 13***22 | Tooth Group-Long | 1 |
| 7T***02 | Tip-Long | 1 |
| 8E***08 | Pin-G.E.T. | 1 |
141-4999 Tooth Gp-Uni
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 1 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
908 serial number reference
On the 908 the serial/PIN plate sits on the left side of the machine, ahead of the cab near the left front tire; the number is also often stamped into the frame nearby under the paint. The first three characters are the serial prefix, tying the machine to its model and production block; the digits that follow are the sequential unit number within that block (for example 8BS00001).
| Prefix | Identifies | Notes |
|---|---|---|
| 8BS | 908 Compact Wheel Loader, vintage build (bare "908") | Earliest vintage-production block. Cat 3054 naturally aspirated diesel. Roughly 1998-2001 production. Not the same machine as later 908H, 908K, 908M, or the current Next Generation 908, which reuse this nameplate on unrelated platforms. |
| TAR | 908 Compact Wheel Loader, vintage build, later serial block (bare "908") | Follows the 8BS block on the same vintage platform. Cat 3044C turbocharged diesel, a genuine mid-production engine change rather than a data conflict. Roughly 2001-2004 production. Confirm exact serial break and years with a dealer using the full PIN. |
Frequently asked questions
What engine does the Caterpillar 908 use?
It varies by configuration and year. Earlier vintage-production machines carry the naturally aspirated Cat 3054 four-cylinder diesel. Later vintage-production machines carry the turbocharged Cat 3044C four-cylinder, rated at 63 kW (84 hp) gross and 57 kW (76 hp) net. Both are mechanically governed with no engine ECM, so confirm which engine is fitted from the machine's own serial plate.
What is the operating weight of the Caterpillar 908?
About 6,040 kg (13,288 lb) in standard configuration, with a full fuel tank, ROPS cab, operator, standard tires, and a general-purpose bucket. Actual weight shifts slightly with the bucket or attachment fitted.
What replaced the Caterpillar 908?
Caterpillar replaced this vintage platform with the 906H/908H-series redesign around 2008, a different machine with its own engine and coupler style. Later K-series, M-series, and the current Next Generation 908 also carry the same nameplate but are separate, newer machines unrelated to this vintage 908's parts and specs.
What 908 owners discuss
What do owners generally say about the vintage Cat 908's overall reliability?
Consensus among longtime owners is a small, dependable compact loader for yard work and light material handling, easy to see out of and simple to maintain next to larger machines. It gives up power and weight to bigger rival compact loaders in the same class, so operators generally scale snow-pusher width to about 3-3.6 m (10-12 ft) rather than running full-size boxes built for heavier loaders. One owner reported about 15 years of dependable service on a unit kept up with routine tire, battery, and pin maintenance. Because this is an older nameplate later reused on newer redesigns, day-to-day owner discussion specific to this generation is thin online compared with the current model; most of what surfaces is dealer parts/service material and scattered repair questions rather than active owner threads.
What engine quirks come up for this generation of the 908?
This machine used a four-cylinder direct-injection diesel built in two forms depending on year and configuration, a naturally aspirated 3054 or a turbocharged 3044C, so exact output varies by engine fitted; confirm from the machine's own plate rather than assuming. Both use mechanical fuel injection with a mechanical governor, no electronic engine management. Reported symptoms trace back to conventional mechanical fuel-system causes: hard or no-start to air trapped in the fuel system or a clogged filter, stalling or rough running to dirty or worn injectors or incorrect pump timing, and low power to a dirty air filter or incorrect injection pressure. Turbo-equipped units on this same engine family occasionally see turbo oil-seal leaks reported in other Cat compact machines that share it. With no engine ECM, there is no fault code to pull; diagnosis is bleed the fuel system, check the filter, then pressure-test the injectors, in that order.
How does the hydrostatic drivetrain behave and what commonly goes wrong with it?
The 908 runs a closed-loop, two-speed hydrostatic drivetrain, not a torque-converter powershift; power goes from a variable-displacement pump straight to a variable-displacement drive motor. Recurring complaints: transmission noise or loss of drive power traced to low or contaminated hydraulic oil, a worn or out-of-adjustment speed-control linkage, or a weak charge pump; jerky travel usually means air got into the circuit, often after a hose or filter service; and oil overheating points to a low fluid level, a dirty filter, or blocked cooling fins. Pump and drive motor share one circuit, so dirty or low oil hurts the whole drivetrain at once. Keeping the hydraulic filter and oil level correct is what owners credit most for keeping this drivetrain trouble-free.
What electrical or sensor complaints come up most for this machine?
Forward/reverse and hi/lo range shifting are solenoid-controlled at the hydrostatic pump, both wired through one shared connector. A broken or corroded harness at that connector is the most commonly reported cause of a machine that cranks and runs but won't move or won't change range. Before condemning the pump, check continuity through the neutral-safety and parking-brake interlock switches first, since either one open also kills drive. This generation predates onboard diagnostics, so there is no scan-tool fault code to chase; troubleshooting is multimeter voltage and continuity checks against the wiring schematic, not a code reader.
What wear patterns show up in the loader linkage and articulation joint?
This is a Z-bar loader linkage on an articulated frame, so the two areas owners watch are the loader-arm pins and bushings and the center articulation (steering) pivot. Both need frequent grease, roughly every shift or every 8-10 hours, shorter in wet or sandy ground, with a moly-based grease; skipping intervals accelerates pin and bushing wear quickly on a machine this size. On a used machine, check articulation-joint play with the bucket loaded and the frame rocked side to side. Noticeable play there means reduced steering precision under load and points to pin, bushing, or pivot-bearing wear that needs measuring, not just greasing.
What do owners say about the brake system, and is there a safety-critical item to watch?
Service brakes are wet-disc, charged through a hydraulic accumulator circuit rather than a simple direct system. A soft or slow-building brake pedal is commonly linked to low accumulator pre-charge or a charging-valve problem rather than the discs themselves; cut-in and cut-out pressures are checked with a gauge, not by feel. A weak accumulator means reduced or delayed braking under load. Have your dealer verify accumulator pre-charge and cut-in/cut-out pressure before putting a machine with a soft pedal back to work.
What should a buyer check before purchasing a used vintage Cat 908?
Start with the plate: confirm the PIN/serial block, since this nameplate spans more than one production run with minor electrical and engine differences between them; don't assume parts or specs from one block apply to another. Pull maintenance records and check hour-meter wear for consistency. Walk the machine: tire condition and even wear, loader-arm pin and bushing play, and articulation-joint play with the bucket loaded. Cold-start it and watch for excess smoke or an unusually long crank. Run the hydrostatic drive through both speed ranges and forward/reverse, listening for whine, hesitation, or a delay engaging range, all of which point back to drivetrain oil condition or the range solenoids. Press the brake pedal and note if it feels soft or slow to build. Have your dealer verify brake accumulator charge and pressure before you close the purchase, since braking is safety-critical and not something to judge by feel alone.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 908 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.