Caterpillarwheel-type loadercompact wheel loader
Caterpillar 907H
Maintenance schedule, common problems & OEM parts breakdown
The Cat 907H is a compact wheel-type loader in Caterpillar's H-series 906H/907H/908H family, sitting in the middle of that three-model line by both weight and bucket size. It runs the Cat C3.4 DIT engine (built on the 3044C DIT platform), a Tier 3 four-cylinder diesel rated at roughly 51-52 kW (68-70 hp) net. Operating weight lands around 5,810 kg (12,809 lb), heavier than the 906H and lighter than the 908H sharing its chassis architecture. Cat sold the H-series from the late 2000s into the early 2010s, offering canopy, Comfort Cab, or Deluxe Cab configurations, standard or high-flow auxiliary hydraulics, and a standard Cat Hystat hydrostatic drive with two ranges (7 and 20 km/h) plus an optional two-speed "speeder" gearbox pushing top speed to about 35 km/h. A skid-steer style quick coupler let the 907H run Cat Skid Steer, Multi Terrain, and Compact Track Loader work tools in addition to its own buckets and forks.
Caterpillar replaced the 907H with the 907H2, which kept the compact wheel-loader layout but moved to the Cat C3.3B DIT engine and Tier 4 Interim emissions compliance, adding the exhaust aftertreatment hardware that comes with that regulatory step. Later M-series and Next Generation 906/907/908 loaders carried the lineage further through Tier 4 Final and beyond. In the used and parts market, the original 907H holds appeal precisely because it predates that aftertreatment complexity: the Tier 3 C3.4 DIT is a mechanically simpler, cheaper-to-maintain engine, and the machine's compact footprint keeps it in steady demand for landscaping, rental fleets, and municipal yards. Parts commonality across the 906H/907H/908H trio also means salvage and aftermarket support stays reasonably deep even as the platform ages out of dealer new-machine lineups.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 907H specifications
Engine
| Engine model | Cat C3.4 DIT, 4-cylinder diesel (same engine platform marketed earlier as the 3044C DIT) |
| Net power | 51-52 kW (68-70 hp) |
| Gross power | 53-55 kW (72-74 hp) |
| Displacement | 3.3 L (203 cu in) |
| Bore x stroke | 94 mm x 119-120 mm (3.7 in x 4.7 in) |
| Cylinders | 4 |
| Emissions tier | Tier 3 / Stage IIIA equivalent for this generation (one listing shows Stage II; Tier 3 is the figure repeated across most spec sheets) |
Weights
| Operating weight (standard configuration, general-purpose bucket) | 5,810 kg (12,809 lb) |
| Full-turn static tipping load, bucket | approx. 3,170-3,200 kg (6,989-7,055 lb) - varies slightly by source |
| Straight (max) tipping load, bucket | approx. 4,260-4,320 kg (9,392-9,524 lb) - varies slightly by source |
| Shipping weight | not published separately from operating weight in available spec sheets - verify with dealer for exact crated/transport figure |
Dimensions
| Overall length (with general-purpose bucket on ground) | 5,435 mm (17 ft 10 in) |
| Overall width (over tires) | 1,880 mm (6 ft 2 in) |
| Overall height (top of cab/ROPS) | 2,585 mm (8 ft 6 in) |
| Wheelbase | 2,170 mm (85 in) |
| Ground clearance | 300 mm (11.8 in) |
| Outside turning radius (over tires, articulated) | 4.48 m (14 ft 8 in) |
| Tire size (standard) | 405/70-R18 (some listings show 405/70-R20 - confirm against build sheet) |
| Rated bucket capacity (general purpose, range across configurations) | 0.75-1.3 m3 (1.0-1.7 yd3), commonly quoted at 0.9-1.0 m3 |
Performance
| Drive system | Cat Hystat hydrostatic drive, standard two-speed range (approx. 7 and 20 km/h / 4.3 and 12.4 mph) |
| Travel speed, high-speed option (optional two-speed hydrostatic "speeder" gearbox) | up to approx. 32-35 km/h (20-22 mph) - varies by source/axle option |
| Breakout force | approx. 42-51 kN (9,442-11,466 lbf) - range across sources, confirm with dealer for exact linkage/bucket combo |
| Hydraulic lift capacity (at full height, pin) | approx. 33-34 kN (7,194-7,643 lbf) |
| Max bucket discharge height (general-purpose bucket, 45-degree dump) | approx. 2.5 m (8 ft 2 in) |
Service capacities (summary)
| Fuel tank | 78 L (20.6 gal) |
| Hydraulic system (total) | 84 L (22.2 gal) |
| Engine oil (with filter) | 9.8-10 L (2.6 gal) |
| Cooling system | 23.8-24 L (6.3 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
907H fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat C3.4 diesel | 10 L (2.6 US gal) | Cat DEO or DEO-ULS, SAE 15W-40 for normal ambient range; drop to SAE 10W-30 in cooler climates. Meets Cat ECF-2/ECF-3 spec. |
| Cooling system | 24 L (6.3 US gal) | Cat ELC (Extended Life Coolant), factory pre-mix, protects to roughly -37 C (-34 F). Do not mix ELC with conventional green coolant. |
| Fuel tank | 78 L (20.6 US gal) on the 907H; the smaller 906H in the same platform carries 52 L (13.7 US gal) - do not swap these two figures. | Ultra-low sulfur diesel, minimum cetane number per Cat fuel spec. Biodiesel blends up to B20 acceptable per standard Cat guidance; verify blend limit against the machine's OMM. |
| Hydraulic system (tank, feeds both implement hydraulics and the hydrostatic drive circuit) | 84 L (22.2 US gal) on the Tier 3, C3.4-engine 907H. Later 907H2 (Tier 4 Final, C3.3B engine) carries a larger tank at roughly 95 L (25 US gal) - capacity varies by series/generation, confirm against the data plate and OMM before filling. | Cat HYDO Advanced 10 (SAE 10W) is the standard fill; Cat Bio HYDO Advanced is offered on high-flow/high-performance configurations. Heavier HYDO Advanced grades apply in warmer ambient ranges - check the OMM viscosity-by-temperature chart for exact cutoffs. |
| Final drives, differentials, and transfer drives (front and rear axles, combined compartment per Cat factory guidance) | Not broken out as a separate published figure in available factory literature; front/rear axle fill quantities are not documented per-axle here - verify exact fill volume against the OMM chart or with your Cat dealer. | Cat TDTO (Transmission/Drive Train Oil), SAE 30, meeting the Cat TO-4 specification - this axle/final-drive/transfer-drive compartment on the 906H/907H/908H family specifically requires TO-4. Cat Arctic TDTO or Cat MTO are the cold-weather alternates. |
| Grease (spec only, no single capacity - applied at pin and pivot points per lubrication schedule) | n/a - grease gun application, not a fill capacity | Cat Multipurpose Grease, NLGI #2 lithium-complex, standard fill for pins and bushings; Cat Advanced 3Moly (or equivalent extreme-pressure moly grease) where extra load protection is called for. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 907H maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
| Every 12,000 h |
|
Servicing the 907H beyond the schedule
Predictive Maintenance & Fluid Analysis
The 907H's engine bay carries dedicated S.O.S sampling ports for the C3.4 DIT engine oil and the hydraulic system, letting a shop track wear metals and contamination trends instead of guessing at oil life. Because a single 84 L (22.2 gal) hydraulic reservoir feeds the loader, steering, and auxiliary circuits together, hydraulic oil sampling catches pump or cylinder wear early before it cascades into a shared-circuit failure. Pair oil sampling with periodic coolant sampling on the extended-life coolant fill, and check axle and planetary final drive oil condition regularly since those sealed-for-life wheel-end units are the first place abrasive contamination shows up on a loader working stockpiles.
Corrective & Common Repairs
Expect the Z-bar loader linkage pins and bushings to wear first on a working 907H, since every load-and-carry cycle puts shock loads through that geometry. The skid-steer style quick coupler's pins and levers see similar wear from frequent work tool changes. On the hydrostatic (Hystat) drive line, watch for weeping seals at the drive motor and pump and listen for cavitation noise, which usually points to a restricted suction strainer or low reservoir level. Also check the axle steering linkage for play, and confirm parking brake adjustment on the axle-mounted discs regularly.
Overhaul & Rebuild Points
High-hour 907H units typically need attention at the C3.4 DIT's injectors and turbocharger before a full engine overhaul is justified. The hydrostatic drive pump and wheel motors are the major driveline wear items on this platform and are usually rebuilt or exchanged as a unit rather than repaired piecemeal. Planetary final drives at each wheel end wear predictably and should be inspected for gear and bearing condition at major service intervals. Loader lift and tilt cylinders often need reseal work well before the linkage pins themselves need replacing, and ROPS/FOPS mounting hardware deserves a structural check at any major rebuild.
Seasonal & Environment Servicing
Standard-fill Cat ELC on the 907H protects to about -37 degC (-34 degF), with an optional coolant fill rated colder plus an engine block heater for genuinely cold climates; hydraulic oil viscosity should also be switched for sustained operation below -20 degC (-4 degF). In hot, dusty environments the two-stage air cleaner's centrifugal pre-cleaner and restriction indicator need frequent attention, and the radiator and hydraulic oil cooler cores should be blown out often to prevent the C3.4 DIT from running hot under continuous loader-cycle duty. Wash accumulated mud from the axle housings and final drives after wet-season work to protect wheel-end seals.
907H common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
| 1R-0734 | Filter-Engine Oil | Lubrication service | Check fitment → |
| 225-5541 | Element As-Jacket Water Heater | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
907H fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| E360 (1/2/3) | Low engine oil pressure detected below the calibrated threshold for current engine speed, logged in three severity levels. | Low oil level, aerated or degraded oil, a plugged filter, a weak oil pump, or a faulty oil pressure sensor or its wiring. | On a level-3 event, shut down safely right away; check the dipstick and oil condition, then inspect the sensor and connector before restarting. |
| E627 (3) | Parking brake switch shows applied while the machine is in motion. | Operator engaged the parking brake without stopping first, or the parking brake switch or wiring is stuck in the applied position. | Stop the machine, release the parking brake before selecting a travel direction, and check the switch and harness if the code returns with the brake released. |
| 110-3 / 110-4 | Engine coolant temperature sensor signal reads above (3) or below (4) the expected voltage range. | Open or shorted sensor circuit, a corroded connector, or a failed sensor. | Inspect the sensor connector and wiring for damage or corrosion, then bench-test the sensor against spec before replacing it. |
| 100-3 / 100-4 | Engine oil pressure sensor circuit voltage is above or below normal, a wiring/sensor fault separate from an actual low-pressure event. | Damaged sensor wiring, poor connector contact, or a failed pressure sensor. | Check harness continuity and connector condition, confirm actual oil pressure with a mechanical gauge, then replace the sensor if wiring checks out. |
| 102-3 / 102-4 | Turbo boost pressure sensor signal is outside the expected voltage range. | Sensor circuit fault, a damaged sense line to the sensor, or a failed sensor. | Inspect the sensor, its wiring, and the sense line for leaks or damage before replacing the component. |
| 168-1 / 168-18 | Battery or charging system voltage is below the minimum the ECM expects. | A weak or failing battery, loose or corroded terminals, a worn drive belt, or a failing alternator. | Check battery state of charge and terminal condition, inspect belt tension, and test alternator output before suspecting the ECM. |
| 41-3 / 41-4 | The shared 8-volt sensor reference supply is above or below normal, and typically triggers several other sensor codes at the same time. | A short to ground or to power on one sensor's signal wire loading down the shared reference circuit. | Resolve this code first, then isolate sensors on the shared circuit one at a time before chasing any secondary codes it triggered. |
| E232 (1/2) | Fuel/water separator has detected a high water level in the filter bowl, logged as a standing Caterpillar event code on engines fitted with the sensor. | Water contamination in the fuel supply, a fouled water-in-fuel sensor, or a separator drain left open. | Drain the water separator, check fuel quality and the tank for contamination, and inspect the sensor if the code returns with a dry bowl. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
907H attachments & work tools
General purpose / light material buckets
Capacity runs roughly 0.75-1.35 m3 (1.0-1.7 yd3) depending on bucket style and series (H vs H2), with a common standard rating near 1.0 m3 (1.3 yd3). Bucket width matches the loader at about 2.05 m (81 in); light-material buckets use curved side plates and a flat torque tube to keep the cutting edge parallel through the lift cycle.
Pallet forks and fork carriage
Fork carriage is a visibility-optimized design carried over from larger Cat loaders, offered with multiple tine lengths; a commonly quoted tine size is about 1.2 m (48 in) long by 5 cm (2 in) thick. Configurations reference full compliance with ISO 14397-1 fork load-center standards; exact load ratings vary by tine length and carriage chosen.
Quick coupler / mounting system
Standard mounting is a hydraulically actuated, skid-steer-loader-style hook coupler, letting the machine run the same hydromechanical work tools used on Cat skid steer, multi-terrain, and compact track loaders. A heavy-duty coupler guard is offered as a factory option to protect the coupler frame in demolition or debris-handling work.
Auxiliary hydraulics / hydraulic kit
Third-function auxiliary hydraulics for hydromechanical tools are built into the single multi-function joystick alongside travel direction, speed range, and differential lock controls. An optional high-flow hydraulic kit raises auxiliary flow to about 125 L/min (33 gal/min) for high-flow tools such as brooms, mulchers, or cold planers; a work-tool wiring harness is available to add a continuous fourth function, e.g. broom angling.
Agriculture and material-handling tools
Bale spears are offered for round and square bales and other baled ag material. Nursery forks are offered for ball-and-burlap tree and potted-plant handling in nursery and landscaping work.
Ground-engaging and site-prep tools
Augers are offered for footing, fence-post, sign-post, and tree-hole drilling. Landscape rakes handle soil scarifying and debris collection, and loader rakes are offered for root removal in land-clearing work.
Snow and sweeping tools
Snow work tools include snow pushes and snow wings sized to the compact-loader class for lot and yard clearing. Angle brooms are offered for sweeping applications, typically run off the high-flow hydraulic circuit for full bristle speed.
Return-to-dig positioner
An optional return-to-dig work-tool positioner automatically returns the bucket or work tool to a preset level (digging) position after a dump cycle, reducing repositioning time in loading cycles.
Ride control
Optional ride control smooths the loader arm over rough ground to improve retention of loose material and operator comfort at travel speed, with auto, on, and off modes. It is called out as recommended when the machine carries the optional higher-speed travel arrangement, around 35 km/h (21.7 mph).
Operator guarding and structure options
Canopy and cab are both offered with ROPS/FOPS certification; canopy is not offered in EU-market configurations. A rear screen/blind option is available for the operator station, and comfort vs deluxe cab trim levels are offered as factory choices.
All 907H assemblies by section
Every catalogued assembly group for the Caterpillar 907H. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
308-3010 Air Cleaner Gp -With Precleaner
| 10***55 | Hose (400 cm) | 0 |
| 13***79 | Precleaner Group; -Turbine | 1 |
| 14***07 | Clamp-Hose | 1 |
242-5900 Air Cleaner Gp
| 10***55 | Hose (400 cm) | 0 |
| 14***07 | Clamp-Hose | 1 |
| 23***68 | Gasket; (Rear Head) | 1 |
272-2445 Air Cleaner Gp
| 11***56 | Air Cleaner Group | 1 |
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
247-6317 Lines Gp-Air
| 24***17 | Lines Group-Air | 1 |
| 5I***78 | Gasket | 1 |
| 5I***21 | Elbow Assem. | 1 |
246-1269 Manifold Gp-Exhaust
| 10***54 | Gasket-Exhaust | 1 |
| 23***24 | Gasket-Manifold | 1 |
| 24***68 | Manifold-Exhaust | 1 |
241-5985 Manifold Gp-Exhaust
| 19***60 | Nut; (M8x1.25-Thd) | 8 |
| 23***24 | Gasket-Manifold | 1 |
| 23***04 | Washer | 8 |
246-1267 Manifold Gp-Inlet
| 09***49 | Bolt; (M8x1.25x40-mm) | 16 |
| 23***06 | Gasket; (Inlet Manifold) | 1 |
| 24***66 | Manifold-Inlet | 1 |
318-3666 Muffler Gp
| 23***47 | Clamp-Muffler | 1 |
| 27***36 | Tube As-Exhaust | 1 |
| 31***66 | Muffler Group | 1 |
242-5815 Muffler Gp
| 23***47 | Clamp-Muffler | 1 |
| 24***15 | Muffler Group | 1 |
| 26***68 | Muffler As | 1 |
299-4445 Pipe Gp-Exhaust
| 10***54 | Gasket-Exhaust | 1 |
| 21***99 | Stud | 4 |
| 29***45 | Pipe Group-Exhaust | 1 |
246-8304 Turbocharger Gp
| 09***00 | Washer; (1.5mm Thk) | 3 |
| 19***06 | Gasket | 2 |
| 23***22 | Clamp | 2 |
Basic Engine
292-4041 Bearing Gp-Main
| 10***88 | Plate-Thrust; (Standard) | 3 |
| 10***89 | Plate-Thrust; (0.15-mm Os) | 0 |
| 10***90 | Plate-Thrust; (0.35-mm Os) | 0 |
233-5473 Camshaft Gp
| 09***28 | Key | 1 |
| 10***72 | Tappet | 8 |
| 10***73 | Rod-Push | 8 |
287-4033 Connecting Rod Gp
| 10***80 | Rod As-Connecting | 4 |
| 12***55 | Bolt-Connecting Rod | 2 |
| 12***56 | Nut | 2 |
233-5480 Cover Gp-Valve Mechanism
| 23***80 | Cover Group-Valve Mechanism | 1 |
| 23***83 | Gasket; (Valve Cover) | 1 |
| 31***98 | Cap-Oil Filler; (Engine) | 1 |
287-4649 Crankshaft Gp
| 08***13 | Pin | 2 |
| 09***28 | Key | 2 |
| 13***96 | Nut | 1 |
287-2416 Cylinder Block Gp
| 09***41 | Cap | 4 |
| 09***20 | Pin | 2 |
| 10***62 | Bushing | 1 |
233-5500 Cylinder Head Gp
| 21***75 | Cap | 7 |
| 23***53 | Cylinder Head | 1 |
| 23***54 | Bolt; (M12x1.75x115-mm) | 17 |
284-4005 Drain Gp-Engine Oil
| 12***76 | Nut; (M14x1.5-Thd) | 1 |
| 23***58 | Elbow | 1 |
| 28***05 | Drain Group-Engine Oil | 1 |
235-5890 Flywheel Gp
| 03***39 | Gear-Starter; (112-Teeth) | 1 |
| 22***93 | Bolt; (M12x1.25x30-mm) | 4 |
| 23***91 | Flywheel As | 1 |
287-4830 Gear Gp-Front
| 11***27 | Gear; (46-Teeth) | 1 |
| 11***29 | Gear; (23-Teeth) | 1 |
| 11***83 | Gear As-Idler; (49-Teeth) | 1 |
315-2631 Guard Gp-Belt
| 16***04 | Spacer; (6.5x9.5x10-mm Thk) | 4 |
| 27***24 | Grommet | 4 |
| 31***21 | Bracket | 1 |
323-5765 Guard Gp-Belt
| 10***74 | Seal-Connector | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
323-5766 Guard Gp-Belt
| 10***74 | Seal-Connector | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
286-5592 Guard Gp-Belt
| 23***03 | Guard-Belt | 1 |
| 23***78 | Bracket As; (Bottom) | 1 |
| 23***80 | Bracket As; (Top) | 1 |
311-6316 Guard Gp-Belt
| 16***04 | Spacer; (6.5x9.5x10-mm Thk) | 5 |
| 27***24 | Grommet | 5 |
| 31***16 | Guard Group-Belt | 1 |
316-1621 Housing Gp-Flywheel
| 10***80 | Gasket-Rear | 1 |
| 11***15 | Seal As-Oil | 1 |
| 14***17 | Bolt; (M10x1.25x25-mm) | 10 |
246-1257 Housing Gp-Front
| 09***00 | Washer; (1.5mm Thk) | 2 |
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 10***77 | Gasket-Front Plate | 1 |
239-8495 Lifting Gp-Engine
| 23***68 | Gasket; (Rear Head) | 1 |
| 23***87 | Eye-Lifting; (Front Head) | 1 |
| 23***95 | Lifting Group-Engine | 1 |
255-6009 Mounting Gp-Engine
| 16***95 | Washer; (16.5x71.5x3-mm Thk) | 4 |
| 25***09 | Mounting Group-Engine | 1 |
| 26***88 | Plate | 1 |
301-3378 Pan Gp-Oil
| 16***01 | Sealant-Silicone | 0 |
| 23***11 | Washer | 1 |
| 23***12 | Guide | 1 |
235-5889 Piston Gp
| 22***04 | Set-Piston Ring; (Standard) | 4 |
| 23***14 | Piston; (Standard) | 4 |
| 23***15 | Pin-Piston | 4 |
287-2983 Plug Gp-Engine
| 19***11 | Plug | 1 |
| 28***83 | Plug Group-Engine; -Cylinder Block, Rh | 1 |
287-2922 Plug Gp-Engine
| 28***22 | Plug Group-Engine; -Cylinder Block, Lh | 1 |
| 5I***05 | Plug | 6 |
301-3396 Pulley Gp-Crankshaft
| 30***96 | Pulley Group-Crankshaft | 1 |
| 30***97 | Pulley-Crankshaft; (2-Groove) | 1 |
239-0686 Pulley Gp-Water Pump
| 23***07 | Pulley | 1 |
| 23***72 | V-Belt; (Water Pump) | 1 |
| 23***86 | Pulley Group-Water Pump | 1 |
287-6114 Pulley Gp-Water Pump
| 23***07 | Pulley | 1 |
| 28***14 | Pulley Group-Water Pump | 1 |
| 8T***42 | Bolt; (M8x1.25x14-mm) | 4 |
287-6138 V-Belt Gp
| 23***72 | V-Belt; (Water Pump) | 1 |
| 28***38 | V-Belt Group; -Water Pump | 1 |
235-5880 Valve Mechanism Gp
| 09***05 | Cap | 1 |
| 19***24 | Ring-Snap | 2 |
| 22***45 | Rocker As | 8 |
Braking System
227-1092 Brake Gp-Parking -Mechanical Caliper
| 22***92 | Brake Group-Parking; -Mechanical Caliper | 1 |
| 22***52 | Kit-Brake Repair; (Parking) | 1 |
| 22***53 | Kit-Lever; (Parking Brake) | 1 |
292-5403 Brake Gp-Service
| 15***40 | Seal-Lip Type | 1 |
| 16***68 | Piston-Brake | 1 |
| 16***13 | Seal-Brake | 1 |
257-6371 Control Gp-Foot Brake -Pedal
| 09***81 | Pin-Spring | 1 |
| 23***88 | Pin-Spring | 2 |
| 25***32 | Bearing As | 2 |
257-6372 Control Gp-Foot Brake
| 09***81 | Pin-Spring | 1 |
| 23***48 | Bearing | 1 |
| 23***88 | Pin-Spring | 2 |
269-8472 Control Gp-Parking Brake
| 16***62 | Insulation | 1 |
| 26***72 | Control Group-Parking Brake | 1 |
| 27***87 | Lever As; (Parking Brake) | 1 |
257-3974 Lines Gp-Service Brake -High Speed Axle
| 10***03 | Plate-Cover | 1 |
| 10***49 | Plate | 2 |
| 10***41 | Hose Assembly | 1 |
257-3936 Lines Gp-Service Brake -Standard Axle
| 10***33 | Film-Identification; (Hydraulic Oil) | 1 |
| 10***49 | Plate | 2 |
| 14***25 | Connector As. | 1 |
260-5406 Lines Gp-Service Brake -High Speed Axle
| 10***03 | Plate-Cover | 1 |
| 10***49 | Plate | 2 |
| 10***41 | Hose Assembly | 1 |
Cooling System
235-5896 Cooler Gp-Engine Oil
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 19***22 | Bolt As; (M8x1.25x22-mm) | 11 |
292-4040 Drain Gp-Coolant
| 23***78 | Valve As-Drain | 1 |
| 29***40 | Drain Group-Coolant | 1 |
242-5899 Fan Gp-Suction
| 14***91 | Spider As; (9-Blade) | 1 |
| 22***96 | Adapter | 1 |
| 24***99 | Fan Group-Suction | 1 |
255-6012 Lines Gp-Coolant
| 08***38 | Sleeve; (11x20x9mm Thk) | 1 |
| 14***35 | Clip | 3 |
| 17***14 | Valve As; (Coolant Drain) | 1 |
303-6279 Pump Gp-Water
| 10***47 | Cover-Pump | 1 |
| 10***50 | Gasket-Cover; (Water Pump) | 1 |
| 23***58 | Gasket | 1 |
242-5898 Radiator & Mounting Gp
| 14***50 | Seal; (1.2-cm Each) | 0 |
| 24***98 | Radiator & Mounting Group | 1 |
| 26***44 | Radiator Group | 1 |
255-5989 Recovery Gp-Coolant
| 13***87 | Clip | 1 |
| 17***07 | Clip | 1 |
| 24***85 | Tank Group-Expansion; (Coolant) | 1 |
Electrical And Starting System
287-6361 Alternator Gp-Charging
| 10***14 | Alternator Group-Charging | 1 |
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
105-2814 Alternator Gp-Charging
| 10***14 | Alternator Group-Charging | 1 |
| 11***58 | Pulley-Alternator | 1 |
| 11***59 | Frame As-Alternator | 1 |
260-5338 Battery & Wiring Gp
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 1 |
277-7746 Control & Mtg Gp-Machine
| 18***76 | Strap As-Ground | 1 |
| 27***46 | Control & Mtg Group-Machine | 1 |
| 27***47 | Electronics Group-Machine | 1 |
277-7747 Electronics Gp-Machine
| 27***47 | Electronics Group-Machine | 1 |
| 30***91 | Control Group-Unprogrammed; (Transmission) | 1 |
| 34***70 | Software Group-Machine | 1 |
293-9791 Fuse Gp -Spare
| 11***90 | Fuse; (10 Amp) | 1 |
| 11***91 | Fuse; (15-Ampere) | 1 |
| 11***92 | Fuse; (20 Amp) | 1 |
235-5904 Glow Plug Gp
| 10***59 | Glow Plug | 4 |
| 23***04 | Glow Plug Group | 1 |
| 25***90 | Plate-Connection | 1 |
218-0942 Heater Gp-Jacket Water
| 13***17 | Cap As-Dust | 1 |
| 21***42 | Heater Group-Jacket Water | 1 |
| 22***41 | Element As-Jacket Water Heater; (120-Volt, 530-Watt) | 1 |
315-6084 Installation Gp-Security
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 19***89 | Film-Identification; (Ignition Switch) | 1 |
107-6032 Lamp Gp-Dome
| 10***32 | Lamp Group-Dome | 1 |
| 25***86 | Lamp; (24-Volt, 10-Watt) | 1 |
214-2968 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
195-0191 Lamp Gp-Head & Signal -Rh
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
195-0189 Lamp Gp-Head & Signal -Rh
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
195-0192 Lamp Gp-Head & Signal -Lh
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
195-0190 Lamp Gp-Head & Signal -Lh
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
309-1325 Lamp Gp-Warning Beacon -Amber
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 30***25 | Lamp Group-Warning Beacon; -12-Volt, Amber | 1 |
| 9R***42 | Plug As | 1 |
260-5500 Lighting Gp-Flood -Front, Rear
| 06***31 | Grommet | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 2 |
260-5354 Lighting Gp-Roading
| 10***05 | Lamp; (12-Volt, 5-Watt)(Registration Plate) | 1 |
| 15***75 | Ladder Clip | 1 |
| 19***89 | Lamp Group-Head & Signal; -Rh-High, Low Beam | 1 |
260-5355 Lighting Gp-Roading
| 10***05 | Lamp; (12-Volt, 5-Watt)(Registration Plate) | 1 |
| 15***75 | Ladder Clip | 1 |
| 19***91 | Lamp Group-Head & Signal; -Rh-High, Low Beam | 1 |
313-1723 Lighting Gp-Roading
| 10***05 | Lamp; (12-Volt, 5-Watt)(Registration Plate) | 1 |
| 19***91 | Lamp Group-Head & Signal; -Rh-High, Low Beam | 1 |
| 19***92 | Lamp Group-Head & Signal; -Lh-High, Low Beam | 1 |
313-1722 Lighting Gp-Roading
| 10***05 | Lamp; (12-Volt, 5-Watt)(Registration Plate) | 1 |
| 19***89 | Lamp Group-Head & Signal; -Rh-High, Low Beam | 1 |
| 19***90 | Lamp Group-Head & Signal; -Lh-High, Low Beam | 1 |
260-5501 Lighting Gp-Warning Beacon
| 26***01 | Lighting Group-Warning Beacon | 1 |
| 30***25 | Lamp Group-Warning Beacon; -12-Volt, Amber | 1 |
273-0177 Panel Gp-Switch -Machine Security, Console
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***56 | Plug; (Switch) | 10 |
| 11***90 | Fuse; (10 Amp) | 17 |
304-7708 Panel Gp-Switch -Console, Rh
| 10***56 | Plug; (Switch) | 10 |
| 11***90 | Fuse; (10 Amp) | 17 |
| 11***91 | Fuse; (15-Ampere) | 1 |
260-5349 Panel Gp-Switch -Console, Rh
| 10***56 | Plug; (Switch) | 1 |
| 11***90 | Fuse; (10 Amp) | 17 |
| 11***91 | Fuse; (15-Ampere) | 1 |
143-0539 Starting Motor Gp-Electric -12-Volt
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***13 | Switch As; (Starting Motor)(12-Volt) | 1 |
287-6181 Starting Motor Gp-Electric
| 14***39 | Starting Motor Group-Electric; -12-Volt | 1 |
| 28***81 | Starting Motor Group-Electric | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
274-8254 Switch Gp-A/C & Heater
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***31 | Clamp | 1 |
| 15***49 | Knob-Control | 1 |
300-1071 Switch Gp-Pressure -Engine Oil
| 30***71 | Switch Group-Pressure; -Engine Oil | 1 |
| 32***52 | Switch-Oil Press; (Engine) | 1 |
260-5521 Switch Gp-Ride Control
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 14***78 | Relay As; (12-Volt)(Differential Lock Sol Valve) | 1 |
260-5507 Switch Gp-Rocker -Quick Coupler Pin Lock
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 26***07 | Switch Group-Rocker; -Quick Coupler Pin Lock | 1 |
| 31***46 | Switch As-Rocker; (Quick Coupler Pin Lock) | 1 |
260-5510 Switch Gp-Rocker -High Speed Select
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 26***10 | Switch Group-Rocker; -High Speed Select | 1 |
| 26***52 | Switch As-Rocker; (High Speed Select) | 1 |
266-7112 Switch Gp-Wiper
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 11***91 | Fuse; (15-Ampere) | 1 |
313-1726 Warning Gp-Backup
| 16***39 | Alarm As | 1 |
| 20***45 | Strap-Cable | 1 |
| 31***70 | Bracket As | 1 |
260-5334 Wiring Gp-Cab -Roof
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 10***32 | Lamp Group-Dome | 1 |
| 20***45 | Strap-Cable | 9 |
260-2594 Wiring Gp-Cab
| 00***84 | Terminal-Blade; (16-Ga To 20-Ga) | 1 |
| 08***30 | Cable As-Chassis | 1 |
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 55 |
260-5524 Wiring Gp-Cab -Work Tool, Boosted Auxiliary Hydraulic Flow Switches
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 18 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***91 | Fuse; (15-Ampere) | 1 |
260-5526 Wiring Gp-Cab -Work Tool, Boosted Auxiliary Hydraulic Flow Switches
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 18 |
| 11***99 | Gasket; (Air Conditioner Control) | 0 |
| 11***91 | Fuse; (15-Ampere) | 1 |
291-4622 Wiring Gp-Cab -Roof
| 06***31 | Grommet | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
314-6658 Wiring Gp-Chassis
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 2 |
259-8001 Wiring Gp-Chassis
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
299-6990 Wiring Gp-Chassis
| 11***15 | Relay As; (12-Volt)(Junction Box) | 2 |
| 17***32 | Bolt-Hex Head; (M4x0.7x16mm) | 2 |
| 20***45 | Strap-Cable | 2 |
259-5421 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***61 | Cap-Connector | 1 |
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
260-5331 Wiring Gp-Front
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
276-6814 Wiring Gp-Front -Boosted Auxiliary Hydraulic Flow
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
260-5389 Wiring Gp-Work Tool -Boosted Auxiliary Hydraulic Flow
| 26***89 | Wiring Group-Work Tool; -Boosted Auxiliary Hydraulic Flow | 1 |
| 26***90 | Wiring Group-Work Tool; -Boosted Auxiliary Hydraulic Flow | 1 |
| 26***24 | Wiring Group-Cab; -Work Tool, Boosted Auxiliary Hydraulic Flow Switches | 1 |
260-5390 Wiring Gp-Work Tool -Boosted Auxiliary Hydraulic Flow
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
Engine Arrangement
179-1858 Engine Ar-Primary
| 17***58 | Engine Ar-Primary | 1 |
| 23***73 | Camshaft Group | 1 |
| 23***80 | Cover Group-Valve Mechanism | 1 |
242-5869 Installation Ar-Engine
| 24***15 | Muffler Group | 1 |
| 24***69 | Installation Ar-Engine | 1 |
| 24***98 | Radiator & Mounting Group | 1 |
Frame And Body
294-0344 Conversion Ar-Roading -Italian
| 10***27 | Film-Identification; (20-Km/H)(20 Kph) | 3 |
| 11***17 | Cover As-Front | 4 |
| 11***48 | Pin | 2 |
307-1560 Conversion Ar-Roading -German
| 12***52 | Film-Identification; (35-Km/H) | 3 |
| 20***77 | Guard Group-Bucket; -Roading | 1 |
| 25***49 | Plate-Identification; (English, German, Spanish) | 1 |
307-1559 Conversion Ar-Roading -German
| 10***27 | Film-Identification; (20-Km/H)(20 Kph) | 3 |
| 20***77 | Guard Group-Bucket; -Roading | 1 |
| 25***49 | Plate-Identification; (English, German, Spanish) | 1 |
294-0345 Conversion Ar-Roading -Italian
| 11***17 | Cover As-Front | 4 |
| 11***48 | Pin | 2 |
| 12***52 | Film-Identification; (35-Km/H) | 3 |
257-7687 Counterweight Gp
| 10***96 | Pin-Keeper | 1 |
| 20***13 | Reflector; (Red) | 2 |
| 25***87 | Counterweight Group | 1 |
297-9677 Cover Gp-Enclosure -Hood, Grill
| 12***43 | Seal; (70-cm) | 0 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 10 |
| 29***77 | Cover Group-Enclosure; -Hood, Grill | 1 |
297-9678 Cover Gp-Enclosure -Hood, Corner Caps
| 27***24 | Grommet | 4 |
| 29***78 | Cover Group-Enclosure; -Hood, Corner Caps | 1 |
| 29***59 | Cover; (Corner, Lh) | 1 |
301-8252 Door Gp-Access -Hood
| 14***50 | Seal; (1.2-cm Each) | 0 |
| 20***08 | Lock As | 2 |
| 29***80 | Door As-Access; (Rh) | 1 |
299-6064 Enclosure Ar-Hood
| 29***77 | Cover Group-Enclosure; -Hood, Grill | 1 |
| 29***78 | Cover Group-Enclosure; -Hood, Corner Caps | 1 |
| 29***58 | Hood Group-Engine | 1 |
308-0581 Enclosure Ar-Hood -Sound Suppression Panel
| 29***77 | Cover Group-Enclosure; -Hood, Grill | 1 |
| 29***78 | Cover Group-Enclosure; -Hood, Corner Caps | 1 |
| 29***58 | Hood Group-Engine | 1 |
262-1692 Fender Gp-Front
| 26***89 | Plate | 2 |
| 26***91 | Fender-Front | 2 |
| 26***92 | Fender Group-Front | 1 |
257-7743 Fender Gp-Rear
| 25***43 | Fender Group-Rear | 1 |
| 27***89 | Fender As; (Rear) | 2 |
| 28***21 | Plate As | 2 |
236-6833 Frame Gp-Loader
| 23***33 | Frame Group-Loader | 1 |
| 29***43 | Frame As | 1 |
| 29***77 | Plate | 1 |
271-8811 Frame Gp-Rear
| 24***54 | Nut-Special; (M10x1.15-Thd) | 26 |
| 27***85 | Frame As | 1 |
| 27***96 | Plate | 1 |
290-7007 Guard Gp-Bottom
| 29***07 | Guard Group-Bottom | 1 |
| 29***08 | Plate As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
320-8425 Guard Gp-Lines
| 16***43 | Sleeve-Abrasion; (37.01-In Each) | 0 |
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
| 16***47 | Sleeve-Abrasion; (19.69-Inch) | 0 |
321-0559 Guard Gp-Lines
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
| 16***11 | Clamp | 12 |
| 32***59 | Guard Group-Lines | 1 |
320-8423 Guard Gp-Lines
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
| 16***11 | Clamp | 8 |
| 32***23 | Guard Group-Lines | 1 |
292-4855 Hitch Gp-Articulating
| 13***72 | Shim; (3.56-mm Thk) | 1 |
| 23***52 | Bearing-Self-Aligning | 2 |
| 25***58 | Plate | 1 |
299-2158 Hood Gp-Engine
| 29***58 | Hood Group-Engine | 1 |
| 30***47 | Hood Group-Engine | 1 |
| 30***30 | Spring As-Gas | 1 |
301-8247 Hood Gp-Engine
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 15***40 | Nut-Weld; (M8x1.25-Thd) | 1 |
| 29***76 | Hinge As | 2 |
302-1345 Lines Gp-Grease -Loader Frame, Lift, Tilt Cylinders
| 30***45 | Lines Group-Grease; -Loader Frame, Lift, Tilt Cylinders | 1 |
| 3B***52 | Elbow; --Cross To Hose Assembly To Air Gauge | 2 |
| 3B***85 | Fitting-Hydraulic; Fitting 45 Degrees Angle--Used As Required | 1 |
260-5492 Mounting Gp-Registration
| 20***45 | Strap-Cable | 5 |
| 26***92 | Mounting Group-Registration | 1 |
| 27***43 | Tie-Push Mount | 2 |
301-3392 Mounting Gp-Registration -With Wiring & Lights
| 15***72 | Kit-Receptacle; (2-Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 19***62 | Lamp Group-Registration Plate | 1 |
306-5277 Panel Gp-Sound Suppression -Hood
| 30***77 | Panel Group-Sound Suppression; -Hood | 1 |
| 30***78 | Insulation | 1 |
| 30***80 | Insulation | 1 |
258-8553 Plate Gp-Firewall
| 25***53 | Plate Group-Firewall | 1 |
| 26***69 | Plate As | 1 |
| 26***70 | Plate As | 1 |
Fuel System
292-0914 Control Gp-Governor -Hand Throttle
| 15***02 | Spacer; (11x20x15-mm Thk) | 1 |
| 22***51 | Washer-Hard; (11x32x5-mm Thk) | 1 |
| 29***13 | Plate As | 1 |
255-5985 Control Gp-Governor
| 25***85 | Control Group-Governor | 1 |
| 27***41 | Cable As | 1 |
| 4K***64 | Clip-- Lock Line To Hitch; (14.2mm Id)(Circular) | 1 |
285-2995 Filter Gp-Water Sep & Fuel
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***49 | Plug | 2 |
| 06***80 | Fitting | 1 |
255-5984 Lines Gp-Fuel
| 12***27 | Grommet | 1 |
| 15***02 | Spacer; (11x20x15-mm Thk) | 1 |
| 17***07 | Clip | 1 |
235-5901 Lines Gp-Fuel Injection
| 09***35 | Cap | 1 |
| 09***90 | Shim (1.800mm Thick) | 0 |
| 09***94 | Shim (0.700mm Thick) | 0 |
301-3391 Pump Gp-Fuel Injection
| 14***17 | Bolt; (M10x1.25x25-mm) | 1 |
| 21***10 | Nut | 1 |
| 23***35 | Stud | 1 |
232-5877 Pump Gp-Fuel Prm & Prim Filter -Water Separator
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 12***14 | Kit-Seal; (Water Separator) | 1 |
242-5760 Tank Gp-Fuel
| 14***67 | Clamp; (Hose) | 2 |
| 20***30 | Cap Group-Fuel Filler; (Vented, Lockable) | 1 |
| 24***60 | Tank Group-Fuel | 1 |
Hydraulic System
162-3961 Accumulator Gp-Ride Control -Uncharged
| 16***60 | Accumulator Group-Ride Control; -Charged | 1 |
| 16***61 | Accumulator Group-Ride Control; -Uncharged | 1 |
162-3960 Accumulator Gp-Ride Control -Charged
| 15***06 | Valve-Gas | 1 |
| 16***96 | Service Kit; (Includes Seals) | 1 |
| 16***60 | Accumulator Group-Ride Control; -Charged | 1 |
300-7511 Actuator Gp-Pump
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 10***18 | Spring | 2 |
| 14***20 | Bolt-Socket Head; (M6x1x75-mm) | 1 |
260-3054 Cooler & Condenser Gp -Hydraulic Oil, Refrigerant
| 26***54 | Cooler & Condenser Group; -Hydraulic Oil, Refrigerant | 1 |
| 27***30 | Core As-Hydraulic Oil Cooler | 1 |
| 27***31 | Core As-Condenser; (Refrigerant) | 1 |
255-5988 Cooler & Mtg Gp-Hydraulic Oil
| 17***77 | Spring | 1 |
| 25***88 | Cooler & Mtg Group-Hydraulic Oil | 1 |
| 27***14 | Washer; (19.5x35x3-mm Thk) | 1 |
274-5160 Core Gp-Hydraulic Oil Cooler
| 27***60 | Core Group-Hydraulic Oil Cooler | 1 |
| 28***48 | Boss | 1 |
| 28***49 | Boss | 1 |
178-3713 Cylinder Gp-Coupler
| 17***13 | Cylinder Group-Coupler | 1 |
| 17***93 | Rod | 2 |
| 18***72 | Kit-Seal; (Coupler Cylinder) | 1 |
257-3975 Cylinder Gp-Lift
| 14***09 | Ring-Wear | 1 |
| 14***18 | Ring-Wear | 1 |
| 16***83 | Seal As-Buffer | 1 |
185-1839 Cylinder Gp-Multipurpose Bukt
| 16***86 | Seal As-Buffer | 1 |
| 16***94 | Seal-U-Cup | 1 |
| 18***39 | Cylinder Group-Multipurpose Bukt | 1 |
257-3977 Cylinder Gp-Tilt
| 09***76 | Ring | 1 |
| 14***49 | Ring-Wear | 1 |
| 14***87 | Seal-Piston | 1 |
257-4020 Hydraulic Ar -Ride Control, Boosted Auxiliary Hydraulic Flow
| 25***72 | Lines Group-Cylinder; -Ride Control Accumulator | 1 |
| 25***20 | Hydraulic Ar; -Ride Control, Boosted Auxiliary Hydraulic Flow | 1 |
| 26***21 | Switch Group-Ride Control | 1 |
272-0958 Hydraulic Ar -Electrohydraulic With Auxiliary Control
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 25***42 | Valve Group-Main Control; -Electrohydraulic, 3-Function | 1 |
| 25***44 | Lines Group-Pilot; -Differential Lock, Hydraulic Lockout | 1 |
242-5870 Hydraulic Ar
| 24***70 | Hydraulic Ar | 1 |
| 25***22 | Mounting Group-Pump | 1 |
| 25***25 | Lines Group-Hydraulic Filter | 1 |
257-4018 Hydraulic Ar -Electrohydraulic With Auxiliary Control
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 25***42 | Valve Group-Main Control; -Electrohydraulic, 3-Function | 1 |
| 25***44 | Lines Group-Pilot; -Differential Lock, Hydraulic Lockout | 1 |
257-4021 Hydraulic Ar -Ride Control
| 25***56 | Lines Group-Cylinder; -Ride Control Accumulator | 1 |
| 25***21 | Hydraulic Ar; -Ride Control | 1 |
| 26***21 | Switch Group-Ride Control | 1 |
272-0957 Hydraulic Ar -Electrohydraulic With Auxiliary Control
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 25***42 | Valve Group-Main Control; -Electrohydraulic, 3-Function | 1 |
| 25***44 | Lines Group-Pilot; -Differential Lock, Hydraulic Lockout | 1 |
257-4019 Hydraulic Ar -Electrohydraulic With Auxiliary, Return To Dig Control
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 25***42 | Valve Group-Main Control; -Electrohydraulic, 3-Function | 1 |
| 25***44 | Lines Group-Pilot; -Differential Lock, Hydraulic Lockout | 1 |
312-8451 Kit-Guard -Light
| 31***51 | Kit-Guard; -Light | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 4 |
281-7281 Lines Gp-Auxiliary Hydraulic -Vertical Pin Lock Coupler
| 11***21 | Lug; (M10x1.5-Thd) | 2 |
| 13***60 | Spacer; (11x19x10-mm Thk) | 4 |
| 14***44 | Plate-Retainer | 1 |
257-3939 Lines Gp-Auxiliary Hydraulic -Horizontal Pin Lock Coupler
| 11***83 | Connector | 1 |
| 13***60 | Spacer; (11x19x10-mm Thk) | 4 |
| 13***20 | Hose As | 2 |
257-3952 Lines Gp-Auxiliary Hydraulic -Vertical Pin Lock Coupler, Boosted Auxiliary Hydraulic Flow
| 09***65 | Grommet | 1 |
| 10***03 | Plate-Cover | 2 |
| 10***89 | Bolt; (M8x1.25x130-mm) | 2 |
284-2843 Lines Gp-Bucket -Multipurpose
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 15***60 | Tee As | 2 |
| 15***17 | Cap-Dust | 1 |
263-8706 Lines Gp-Bucket -Multipurpose
| 14***82 | Hose As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
257-3972 Lines Gp-Cylinder -Ride Control Accumulator
| 08***29 | Spacer; (9x19x30-mm Thk) | 2 |
| 10***54 | Connector-Orfs | 1 |
| 10***33 | Clip; (Slot) | 2 |
257-3957 Lines Gp-Cylinder -Load Control
| 13***11 | Elbow | 1 |
| 14***25 | Connector As. | 3 |
| 14***28 | Connector Assem. | 1 |
257-3956 Lines Gp-Cylinder -Ride Control Accumulator
| 08***29 | Spacer; (9x19x30-mm Thk) | 2 |
| 10***54 | Connector-Orfs | 1 |
| 10***33 | Clip; (Slot) | 2 |
257-3955 Lines Gp-Cylinder -Lift, Tilt
| 13***11 | Elbow | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
282-9570 Lines Gp-Hydraulic Oil Cooler
| 13***55 | Hose; (8-cm) | 0 |
| 14***41 | Connector Group | 1 |
| 15***32 | Elbow As | 1 |
257-3946 Lines Gp-Hydraulic Oil Cooler
| 13***55 | Hose; (8-cm) | 0 |
| 14***41 | Connector Group | 1 |
| 15***32 | Elbow As | 1 |
257-3944 Lines Gp-Pilot -Differential Lock, Hydraulic Lockout
| 03***32 | Strap--Harness Assembly To Compressor | 1 |
| 14***25 | Connector | 1 |
| 14***25 | Connector As. | 8 |
272-2236 Lines Gp-Pilot -Auxiliary Control Valve
| 14***25 | Connector As. | 3 |
| 14***68 | Elbow Group | 3 |
| 1P***78 | Clamp; (Hose) | 2 |
297-0164 Lines Gp-Pump
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 15***59 | Tee Group | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
257-3923 Lines Gp-Pump
| 14***47 | Elbow; (-12 Orb/Orfs) | 2 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 18***86 | Tee As | 1 |
244-6735 Manifold Gp-Control -2-Way, Proportional-Auxiliary
| 18***54 | Valve Group-Solenoid; -Auxiliary | 2 |
| 24***35 | Manifold Group-Control; -2-Way, Proportional-Auxiliary | 1 |
262-8718 Manifold Gp-Control -Differential Lock, Hydraulic Lockout
| 24***81 | Flange | 2 |
| 24***12 | Kit-Seal; (Solenoid Valve) | 1 |
| 26***18 | Manifold Group-Control; -Differential Lock, Hydraulic Lockout | 1 |
248-7696 Manifold Gp-Control -Boosted Auxiliary Hydraulic Flow
| 10***08 | Kit-Seal; (Solenoid Valve, Quick Steer) | 1 |
| 13***11 | Valve-Check | 1 |
| 14***88 | Kit-Seal; (Ride Control, Switch) | 1 |
245-8780 Manifold Gp-Ride Control
| 14***88 | Kit-Seal; (Ride Control, Switch) | 1 |
| 22***09 | Kit-Seal; (Accumulator) | 1 |
| 23***28 | Coil As | 1 |
257-3926 Motor & Lines Gp-Hydraulic Fan
| 13***55 | Hose; (8-cm) | 0 |
| 14***53 | Hose; (272.2-cm) | 0 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
257-4009 Motor Gp-Gear -Hydraulic Fan
| 21***77 | Seal-O-Ring | 1 |
| 22***40 | Valve Group-Relief; (Gear Motor) | 1 |
| 25***09 | Motor Group-Gear; -Hydraulic Fan | 1 |
9r-4668 Mounting Gp-Cylinder -Multipurpose Bucket
| 3B***17 | Cotter; (Pin) | 4 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 4 |
| 9R***68 | Mounting Group-Bucket Cylinder; -Multipurpose Bucket | 1 |
265-3923 Mounting Gp-Control Valve
| 16***08 | Mount As | 3 |
| 26***23 | Mounting Group-Control Valve | 1 |
| 27***86 | Plate As | 1 |
280-0527 Mounting Gp-Cooler & Condenser -Hydraulic Oil, Refrigerant
| 17***77 | Spring | 1 |
| 26***54 | Cooler & Condenser Group; -Hydraulic Oil, Refrigerant | 1 |
| 27***14 | Washer; (19.5x35x3-mm Thk) | 1 |
260-5386 Positioner Gp-Work Tool -Return To Dig
| 11***60 | Strap | 2 |
| 26***86 | Positioner Group-Work Tool; -Return To Dig | 1 |
| 27***43 | Tie-Push Mount | 3 |
257-7684 Tank Gp-Hydraulic
| 14***37 | Cap As-Filler; (Hydraulic Tank) | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 1 |
| 20***18 | Strainer; (Hydraulic Oil) | 1 |
332-6408 Valve & Mtg Gp-Solenoid -Quick Coupler
| 16***77 | Valve As | 1 |
| 16***79 | Kit-Seal | 1 |
| 27***35 | Coil As | 1 |
308-0190 Valve Gp-Drain -Standard
| 28***16 | Plug As | 2 |
| 30***90 | Harness; Wire, Valve Group-Drain; -Standard | 1 |
308-0189 Valve Gp-Drain -Ecology
| 10***39 | Plug As-Drain; (Hydraulic Tank) | 2 |
| 15***27 | Tube As-Drain | 1 |
| 16***92 | Clip | 2 |
257-3942 Valve Gp-Main Control -Electrohydraulic, 3-Function
| 22***41 | Seal-O-Ring | 1 |
| 25***42 | Valve Group-Main Control; -Electrohydraulic, 3-Function | 1 |
| 30***18 | Valve Group-Relief; (Main) | 1 |
185-4254 Valve Gp-Solenoid
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 18***54 | Valve Group-Solenoid; -Auxiliary | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
Implements
242-5649 Control Gp-Work Tool
| 24***93 | Pin | 2 |
| 24***94 | Pin | 1 |
| 24***95 | Pin | 2 |
Lubrication System
326-6393 Breather Gp -Crankcase
| 23***37 | Clip-Hose | 1 |
| 23***38 | Clip | 3 |
| 23***39 | Pipe | 1 |
314-9901 Filter Gp-Engine Oil
| 09***37 | Seal-O-Ring | 1 |
| 09***71 | Seal-O-Ring (Id=94.40mm) | 1 |
| 1R***34 | Filter-Engine Oil | 1 |
287-5377 Lines Gp-Engine Oil
| 23***94 | Strainer As-Oil; (Engine) | 1 |
| 23***13 | Seal-O-Ring | 1 |
| 28***77 | Lines Group-Engine Oil | 1 |
235-5895 Pump Gp-Engine Oil
| 10***44 | Nut | 1 |
| 10***83 | Seal-O-Ring | 1 |
| 11***41 | Pump As-Oil | 1 |
287-5665 Valve Gp-Engine Oil Relief
| 10***25 | Valve As; (Oil Bypass)(Engine) | 1 |
| 23***96 | Gasket | 1 |
| 23***96 | Gasket | 1 |
242-8716 Valve Gp-Fluid Sampling -Engine Oil
| 24***16 | Valve Group-Fluid Sampling; -Engine Oil | 1 |
| 24***17 | Tee | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
Machine Arrangement
284-0894 Chassis Ar
| 23***33 | Frame Group-Loader | 1 |
| 23***37 | Link Group-Steering Frame Lock | 1 |
| 24***49 | Control Group-Work Tool | 1 |
284-0893 Common Ar
| 17***58 | Engine Ar-Primary | 1 |
| 24***69 | Installation Ar-Engine | 1 |
| 24***70 | Hydraulic Ar | 1 |
307-1561 Conversion Ar-Certification
| 20***77 | Guard Group-Bucket; -Roading | 1 |
| 30***61 | Cover, Conversion Ar-Certification | 1 |
Operator Station
297-4326 Air Conditioner Ar
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 25***86 | Lines Group-Cab Heater | 1 |
| 25***34 | Air Conditioner Group | 1 |
259-1634 Air Conditioner Gp
| 11***91 | Fuse; (15-Ampere) | 1 |
| 11***92 | Fuse; (20 Amp) | 1 |
| 14***78 | Relay As; (12-Volt)(Differential Lock Sol Valve) | 1 |
269-3820 Air Conditioner Gp
| 11***31 | Switch-Temperature; (Air Conditioner) | 1 |
| 22***74 | Fitting-Drain | 2 |
| 22***83 | Valve-Drain | 2 |
280-9542 Box Gp-Storage
| 15***72 | Knob | 1 |
| 27***51 | Box Group-Storage | 1 |
| 28***71 | Plate | 1 |
272-2251 Box Gp-Storage
| 20***08 | Lock As | 1 |
| 27***70 | Door Group-Access | 1 |
| 27***71 | Door | 1 |
295-5847 Cab Ar-Enclosed Rops -Standard
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 19***09 | Plug | 2 |
295-5845 Cab Ar-Enclosed Rops -Comfort
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 19***09 | Plug | 2 |
295-5846 Cab Ar-Enclosed Rops -Deluxe
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 19***09 | Plug | 2 |
295-7921 Cab Gp-Enclosed Rops
| 25***40 | Cab As | 1 |
| 25***43 | Glass | 1 |
| 25***93 | Glass | 1 |
295-5848 Canopy Ar-Open Rops
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 19***09 | Plug | 2 |
277-2528 Canopy Ar-Open Rops
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 19***09 | Plug | 2 |
295-7928 Canopy Gp-Open Rops
| 26***25 | Canopy As-Open Rops | 1 |
| 26***12 | Panel As-Rear | 1 |
| 29***28 | Canopy Group-Open Rops | 1 |
272-2444 Compressor & Mtg Gp-Refrig
| 23***23 | Switch As-Pressure; (Refrigerant Compr, High Side) | 1 |
| 27***44 | Compressor & Mtg Group-Refrig | 1 |
| 30***10 | V-Belt; (Mounting) | 1 |
280-9177 Console Gp-Operator
| 27***53 | Console As | 1 |
| 28***77 | Console Group-Operator | 1 |
| 28***65 | Plate As | 1 |
295-5535 Control & Mtg Gp-Pedal -Governor
| 25***70 | Pedal Group-Governor | 1 |
| 29***08 | Plate | 1 |
| 29***09 | Plate | 1 |
295-5536 Control & Mtg Gp-Pedal -Governor
| 27***48 | Pedal Group-Governor | 1 |
| 29***08 | Plate | 1 |
| 29***09 | Plate | 1 |
295-1706 Control Ar-Transmission
| 26***09 | Control Group-Creeper | 1 |
| 28***48 | Control Group-Rimpull | 1 |
| 29***14 | Control Group-Governor; -Hand Throttle | 1 |
274-8255 Control Gp-A/C & Heater
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***31 | Clamp | 1 |
| 15***49 | Knob-Control | 1 |
260-5509 Control Gp-Creeper
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***49 | Knob-Control | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
262-8744 Control Gp-Joystick -3-Function, Auxiliary Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 17***70 | Coil As | 1 |
262-8868 Control Gp-Joystick -3-Function
| 15***43 | Handle-Control | 1 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 26***21 | Kit-Detent | 2 |
262-8745 Control Gp-Joystick -3-Function, Auxiliary, Return To Dig Control
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 26***21 | Kit-Detent | 2 |
| 26***39 | Valve Group-Pilot; (Joystick, 3-Function) | 1 |
284-8648 Control Gp-Rimpull
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***49 | Knob-Control | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
259-1644 Control Gp-Steering -Adjustable Column
| 25***44 | Control Group-Steering; -Adjustable Column | 1 |
| 28***34 | Kit-Pivot; (Steering Column) | 1 |
| 29***07 | Kit-Lever | 1 |
259-1643 Control Gp-Steering -Fixed Column
| 25***43 | Control Group-Steering; -Fixed Column | 1 |
| 34***57 | Steering Column As | 1 |
| 34***58 | Contact As | 1 |
260-5527 Control Gp-Transmission
| 10***80 | Bolt-Socket Head; (M5x0.8x16-mm)(European Sourced) | 2 |
| 26***27 | Control Group-Transmission | 1 |
| 27***89 | Control Group-Transmission | 1 |
273-9189 Control Gp-Transmission
| 27***89 | Control Group-Transmission | 1 |
293-0549 Cover Gp-Access -Cab, Front
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 14***50 | Seal; (1.2-cm Each) | 0 |
| 22***92 | Lock As | 1 |
284-2969 Cover Gp-Cab -Rear Skirt
| 22***43 | Seal; (8.5-cm Each) | 0 |
| 27***73 | Plate As | 1 |
| 27***74 | Plate As | 1 |
267-9382 Door Gp-Cab -Rh
| 11***03 | Bolt; (M6x1x55-mm) | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 19***99 | Bolt; (M4x0.7x25-mm) | 4 |
275-8189 Door Gp-Cab -Rh
| 11***03 | Bolt; (M6x1x55-mm) | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 19***99 | Bolt; (M4x0.7x25-mm) | 4 |
275-8188 Door Gp-Cab -Lh
| 11***03 | Bolt; (M6x1x55-mm) | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 19***99 | Bolt; (M4x0.7x25-mm) | 4 |
257-6374 Duct & Filter Gp-Cab Air
| 11***29 | Washer; (6.6x22x2-mm Thk) | 3 |
| 15***72 | Knob | 1 |
| 25***74 | Duct & Filter Group-Cab Air | 1 |
280-2370 Floor Mat Gp
| 26***37 | Floor Mat; (Upper) | 1 |
| 26***38 | Floor Mat; (Front) | 1 |
| 27***53 | Plate | 2 |
259-1633 Heater & Mtg Gp-Cab
| 11***93 | Fuse; (25-Ampere) | 1 |
| 25***33 | Heater & Mtg Group-Cab | 1 |
| 26***19 | Heater Group-Cab | 1 |
297-4701 Heater Ar-Cab
| 25***86 | Lines Group-Cab Heater | 1 |
| 25***88 | Cooler & Mtg Group-Hydraulic Oil | 1 |
| 25***46 | Lines Group-Hydraulic Oil Cooler | 1 |
269-3819 Heater Gp-Cab
| 26***19 | Heater Group-Cab | 1 |
| 27***90 | Motor As-Blower; (Air Conditioner, Heater) | 1 |
| 27***91 | Coil As-Heater | 1 |
266-1420 Installation Gp-Radio -Nacd
| 18***44 | Cable-Lock | 1 |
| 26***81 | Radio | 1 |
| 26***20 | Installation Group-Radio; -Nacd | 1 |
266-1418 Installation Gp-Radio -Eame
| 18***44 | Cable-Lock | 1 |
| 26***81 | Radio | 1 |
| 26***18 | Installation Group-Radio; -Eame | 1 |
284-3889 Latch Gp -Door
| 17***94 | Bumper | 2 |
| 28***85 | Striker As | 2 |
| 28***89 | Latch Group; -Door | 1 |
257-6373 Liner Gp-Cab
| 25***73 | Liner Group-Cab | 1 |
| 26***68 | Cover-Speaker | 2 |
| 26***95 | Headliner As; (Cab) | 1 |
271-7193 Lines Gp-Air Conditioner
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
| 12***27 | Grommet | 1 |
255-5986 Lines Gp-Cab Heater
| 13***41 | Grommet | 1 |
| 13***98 | Spacer; (6.6x25x27-mm Thk) | 1 |
| 17***20 | Strap-Dual Clamp | 1 |
6v-1970 Literature Gp
| 5P***58 | Sleeve; (Cable Splice) | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
| 6V***70 | Literature Group; (Literature Compartment) | 1 |
257-8403 Mirror Gp-Rear View -Interior
| 25***03 | Mirror Group-Rear View; -Interior | 1 |
| 3B***03 | Lockwasher | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 1 |
260-3558 Mirror Gp-Rear View -Exterior
| 20***85 | Mirror; (Exterior) | 2 |
| 26***58 | Mirror Group-Rear View; -Exterior | 1 |
| 29***53 | Bracket As; (Lh) | 1 |
260-3556 Mirror Gp-Rear View -Interior
| 25***03 | Mirror Group-Rear View; -Interior | 1 |
| 26***56 | Mirror Group-Rear View; -Interior | 1 |
| 27***55 | Plate | 1 |
269-0416 Motor Gp-Window Wiper -Rear
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 26***23 | Cap-Wiper | 1 |
241-9102 Motor Gp-Window Wiper -Front
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***91 | Motor Group-Window Wiper; (Front) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
256-9635 Mounting Gp-Cab
| 25***35 | Mounting Group-Cab | 1 |
| 34***01 | Washer; (20.5x108x10-mm Thk) | 4 |
| 3E***83 | Sleeve | 4 |
260-5499 Mounting Gp-Radio
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 14***59 | Fuse; (5-Ampere) | 1 |
| 15***39 | Cable As | 1 |
295-5279 Operator Ar-Canopy
| 17***01 | Seat Group; -Fixed Mount | 1 |
| 25***88 | Cooler & Mtg Group-Hydraulic Oil | 1 |
| 25***46 | Lines Group-Hydraulic Oil Cooler | 1 |
295-5276 Operator Ar-Enclosed Rops -Deluxe Cab
| 25***75 | Wiper Group-Window | 1 |
| 25***44 | Control Group-Steering; -Adjustable Column | 1 |
| 26***94 | Wiring Group-Cab | 1 |
295-5275 Operator Ar-Enclosed Rops -Comfort Cab
| 25***75 | Wiper Group-Window | 1 |
| 25***44 | Control Group-Steering; -Adjustable Column | 1 |
| 26***94 | Wiring Group-Cab | 1 |
295-5278 Operator Ar-Enclosed Rops
| 17***01 | Seat Group; -Fixed Mount | 1 |
| 25***75 | Wiper Group-Window | 1 |
| 25***43 | Control Group-Steering; -Fixed Column | 1 |
295-5277 Operator Ar-Open Rops -Canopy
| 25***88 | Cooler & Mtg Group-Hydraulic Oil | 1 |
| 25***46 | Lines Group-Hydraulic Oil Cooler | 1 |
| 25***43 | Control Group-Steering; -Fixed Column | 1 |
293-0547 Panel Gp-Cab -Front
| 29***43 | Glass; (Lh) | 1 |
| 29***44 | Panel As; (Rh) | 1 |
| 29***45 | Glass; (Rh) | 1 |
260-5186 Panel Gp-Instrument -Gauge Cluster, Switches
| 10***56 | Plug; (Switch) | 4 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 15***75 | Kit-Receptacle; (6-Pin) | 1 |
257-6370 Pedal Gp-Governor
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 1S***25 | Bearing-Sleeve | 5 |
271-0948 Pedal Gp-Governor
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 1S***25 | Bearing-Sleeve | 5 |
260-9830 Plate Gp-Seat
| 25***91 | Plate As | 1 |
| 26***30 | Plate Group-Seat | 1 |
| 28***53 | Gasket | 1 |
279-0643 Screen Gp-Sun
| 12***99 | Rivet | 4 |
| 26***55 | Roller As | 1 |
| 26***73 | Spacer; (6.22x9.52x11-mm Thk) | 2 |
279-5723 Seat & Mounting Gp
| 25***37 | Seat Group-Suspension; -Cloth | 1 |
| 27***23 | Seat & Mounting Group | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
279-5724 Seat & Mounting Gp
| 23***91 | Seat Group-Suspension; -Deluxe, Cloth | 1 |
| 27***24 | Seat & Mounting Group | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
279-5725 Seat & Mounting Gp
| 11***91 | Fuse; (15-Ampere) | 1 |
| 14***59 | Fuse; (5-Ampere) | 1 |
| 25***35 | Seat Group-Suspension; -Air, Deluxe, Cloth | 1 |
260-9831 Seat Belt Gp
| 1L***80 | Bolt; (7/16-20x1.5-In) | 2 |
| 26***85 | Spacer; (11.5x19x7-mm Thk) | 3 |
| 26***31 | Seat Belt Group | 1 |
236-8015 Seat Belt Gp
| 22***37 | Seat Belt Group; -Retractable | 1 |
| 23***15 | Seat Belt Group | 1 |
| 8S***26 | Bolt; (7/16-20x3-In) | 1 |
174-1100 Seat Gp -Vinyl
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 17***00 | Seat Group; -Vinyl | 1 |
| 21***65 | Kit-Seat Frame; (Upper Seat) | 1 |
174-1101 Seat Gp -Fixed Mount
| 17***00 | Seat Group; -Vinyl | 1 |
| 17***01 | Seat Group; -Fixed Mount | 1 |
| 3E***52 | Washer-Hard; (8.8x20.5x2.5-mm Thk) | 4 |
259-1635 Seat Gp-Suspension -Air, Deluxe, Cloth
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
| 15***56 | Kit-Armrest; (Seat)(Rh) | 1 |
259-1637 Seat Gp-Suspension -Cloth
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
| 15***86 | Kit-Cover; (Seat) | 1 |
233-7391 Seat Gp-Suspension -Deluxe, Cloth
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
| 15***56 | Kit-Armrest; (Seat)(Rh) | 1 |
260-9827 Suppression Gp-Sound -Cab
| 26***27 | Suppression Group-Sound; -Cab | 1 |
| 29***55 | Insulation | 1 |
299-6051 Tank Gp-Window Washer
| 14***95 | Hose; (650-cm Each) | 0 |
| 29***51 | Tank Group-Window Washer | 1 |
| 29***36 | Reservoir | 1 |
279-5068 Tank Gp-Window Washer
| 14***95 | Hose; (650-cm Each) | 0 |
| 27***68 | Tank Group-Window Washer | 1 |
| 28***58 | Bracket As | 1 |
295-2238 Tray Gp-Storage
| 03***26 | Retainer | 1 |
| 15***72 | Knob | 1 |
| 28***19 | Gaiter | 1 |
282-8636 Trim Gp-Cab -Front
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 16***62 | Insulation | 2 |
| 25***63 | Rivet-Blind | 1 |
296-0367 Trim Gp-Cab
| 25***43 | Steering Wheel | 1 |
| 25***48 | Knob As; (Steering Wheel) | 1 |
| 25***73 | Liner Group-Cab | 1 |
296-0373 Trim Gp-Cab -Front
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 16***62 | Insulation | 1 |
| 26***96 | Plenum | 1 |
269-0415 Trim Gp-Cab -Rh
| 16***62 | Insulation | 2 |
| 20***08 | Lock As | 1 |
| 24***34 | Knob | 1 |
296-0372 Trim Gp-Cab
| 25***43 | Steering Wheel | 1 |
| 25***48 | Knob As; (Steering Wheel) | 1 |
| 26***15 | Trim Group-Cab; -Rh | 1 |
296-0368 Trim Gp-Cab -Front
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 16***62 | Insulation | 1 |
274-4287 Trim Gp-Cab -Front
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 16***62 | Insulation | 2 |
260-3544 Trim Gp-Cab -Open Rops
| 25***43 | Steering Wheel | 1 |
| 25***48 | Knob As; (Steering Wheel) | 1 |
| 26***44 | Trim Group-Cab; -Open Rops | 1 |
260-3545 Trim Gp-Cab -Enclosed Rops
| 25***43 | Steering Wheel | 1 |
| 25***48 | Knob As; (Steering Wheel) | 1 |
| 25***73 | Liner Group-Cab | 1 |
270-1901 Visor Gp-Cab
| 27***01 | Visor Group-Cab | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 2 |
| 6V***32 | Nut-Weld (M6x6 Thd); (M10x1.5) (Weld) | 2 |
257-6375 Wiper Gp-Window
| 13***34 | Arm As-Window Wiper | 1 |
| 13***94 | Nozzle As-Washer | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
Power Train
142-1273 Valve Gp-Tire
| 14***73 | Valve Group-Tire | 1 |
| 14***78 | Valve Group | 1 |
262-8650 Axle & Transfer Drive Gp-Rear -High Speed, With Differential Lock
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 2 |
| 16***46 | Bolt; (M12x1.75x18-mm) | 16 |
| 16***02 | Seal-O-Ring | 2 |
262-8641 Axle & Transfer Drive Gp-Rear -Standard, With Differential Lock
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 1 |
| 16***46 | Bolt; (M12x1.75x18-mm) | 16 |
| 16***48 | Bolt; (M12x1.75x55-mm) | 8 |
306-5422 Axle Gp-Front -Standard Axle, With Differential Lock
| 26***39 | Axle Group-Front; -Standard, With Differential Lock | 1 |
| 26***74 | Cable As-Parking Brake Control | 1 |
| 30***22 | Axle Group-Front; -Standard Axle, With Differential Lock | 1 |
262-8647 Axle Gp-Front -High Speed, With Differential Lock
| 15***28 | Pad-Brake; (2 Required) | 2 |
| 15***56 | Brake Group-Hydraulic Caliper; (Parking, Service) | 1 |
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 1 |
305-1933 Axle Gp-Front -High Speed, With Differential Lock
| 09***23 | Pin-Cotter | 1 |
| 16***46 | Pin | 1 |
| 20***12 | Bolt-Flange Head; (M12x1.75x40-mm) | 2 |
262-8639 Axle Gp-Front -Standard, With Differential Lock
| 15***28 | Pad-Brake; (2 Required) | 2 |
| 15***56 | Brake Group-Hydraulic Caliper; (Parking, Service) | 1 |
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 1 |
292-5408 Differential & Bevel Gear Gp -Rear, Locking, Standard Axle
| 13***08 | Bearing As-Tapered Roller | 2 |
| 15***45 | Plug-Magnetic; (Transfer Drive) | 1 |
| 19***95 | Bolt; (M6x1x14-mm) | 2 |
292-5410 Differential & Bevel Gear Gp -Rear, Locking, High Speed Axle
| 13***08 | Bearing As-Tapered Roller | 2 |
| 15***45 | Plug-Magnetic; (Transfer Drive) | 1 |
| 19***95 | Bolt; (M6x1x14-mm) | 2 |
292-5396 Differential & Bevel Gear Gp -Front, Locking
| 13***08 | Bearing As-Tapered Roller | 2 |
| 15***45 | Plug-Magnetic; (Transfer Drive) | 1 |
| 19***95 | Bolt; (M6x1x14-mm) | 2 |
292-5397 Differential Gp
| 20***10 | Gear-Bevel; (12-Teeth) | 4 |
| 21***92 | Washer-Thrust; (22x42x2-mm Thk) | 4 |
| 21***93 | Shaft | 2 |
292-5376 Drive Gp-Transfer -Hydrostatic, High Speed
| 05***90 | Vent | 1 |
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 1 |
| 09***47 | Nut-Thin; (M16x2 Thd) | 1 |
292-5375 Drive Gp-Transfer -Hydrostatic
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 2 |
| 09***29 | Ring; (Retaining) | 1 |
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 2 |
137-7747 Filter Gp-Oil -Hydraulic, Power Train
| 13***47 | Filter Group-Oil; -Hydraulic, Power Train | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
292-5402 Flange Gp-Wheel
| 15***39 | Seal-Lip Type | 1 |
| 17***08 | Cone-Tapered | 2 |
| 20***98 | Stud | 8 |
300-5463 Head Gp-Pump -Hydrostatic
| 08***72 | Plug-O-Ring | 3 |
| 11***79 | Bushing; (External) | 1 |
| 11***80 | Bushing; (Internal) | 1 |
257-3969 Lines Gp-Differential Lock
| 12***79 | Clip | 1 |
| 14***25 | Connector As. | 1 |
| 14***68 | Elbow Group | 1 |
257-3925 Lines Gp-Hydraulic Filter
| 13***47 | Filter Group-Oil; -Hydraulic, Power Train | 1 |
| 14***28 | Connector Assem. | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
257-3973 Lines Gp-Hydrostatic -High Speed Axle
| 08***91 | Bolt; (M10x1.5x55-mm) | 4 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***62 | Elbow Group | 1 |
257-3935 Lines Gp-Hydrostatic -Standard Axle
| 08***91 | Bolt; (M10x1.5x55-mm) | 4 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***34 | Tee As-Orfs | 1 |
276-8702 Lines Gp-Power Train Oil -Axle Speed Select
| 14***25 | Connector As. | 2 |
| 14***68 | Elbow Group | 1 |
| 15***68 | Tee Group | 1 |
257-3932 Motor Gp-Piston -Hydrostatic
| 03***39 | Seal-O-Ring (Id=9.25mm) | 1 |
| 09***74 | Bolt-Socket Head; (M12x1.75x65-mm) | 8 |
| 09***42 | Ring-Retaining | 1 |
275-9377 Mounting Gp-Axle
| 27***77 | Mounting Group-Axle | 1 |
| 27***79 | Plate | 4 |
| 7X***79 | Bolt; (M24x3x240-mm) | 8 |
255-6014 Mounting Gp-Hydrostatic Pump
| 22***35 | Flange | 1 |
| 25***97 | Bolt-Socket Head; (M12x1.75x35-mm) | 1 |
| 25***14 | Mounting Group-Hydrostatic Pump | 1 |
292-5374 Planetary Gp-Final Drive
| 09***24 | Ring-Retaining | 3 |
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 1 |
| 19***69 | Plug; (Thrust) | 1 |
301-2971 Power Train Ar -Standard Axle, With Differential Lock
| 25***35 | Lines Group-Hydrostatic; -Standard Axle | 1 |
| 25***36 | Lines Group-Service Brake; -Standard Axle | 1 |
| 25***69 | Lines Group-Differential Lock | 1 |
294-7926 Power Train Ar -Standard Axle, With Differential Lock
| 25***35 | Lines Group-Hydrostatic; -Standard Axle | 1 |
| 25***36 | Lines Group-Service Brake; -Standard Axle | 1 |
| 25***69 | Lines Group-Differential Lock | 1 |
301-2972 Power Train Ar -High Speed Axle, With Differential Lock
| 25***69 | Lines Group-Differential Lock | 1 |
| 25***73 | Lines Group-Hydrostatic; -High Speed Axle | 1 |
| 26***06 | Lines Group-Service Brake; -High Speed Axle | 1 |
301-2973 Power Train Ar -Standard Axle, With Differential Lock
| 25***35 | Lines Group-Hydrostatic; -Standard Axle | 1 |
| 25***36 | Lines Group-Service Brake; -Standard Axle | 1 |
| 26***41 | Axle & Transfer Drive Group-Rear; -Standard, With Differential Lock | 1 |
294-7927 Power Train Ar -High Speed Axle, With Differential Lock
| 25***69 | Lines Group-Differential Lock | 1 |
| 25***73 | Lines Group-Hydrostatic; -High Speed Axle | 1 |
| 25***74 | Lines Group-Service Brake; -High Speed Axle | 1 |
301-2974 Power Train Ar -High Speed Axle, With Differential Lock
| 25***73 | Lines Group-Hydrostatic; -High Speed Axle | 1 |
| 26***06 | Lines Group-Service Brake; -High Speed Axle | 1 |
| 26***10 | Switch Group-Rocker; -High Speed Select | 1 |
257-3931 Pump Gp-Piston -Hydrostatic
| 10***20 | Seal-O-Ring | 1 |
| 11***30 | Screw; (1-5/16-Thd) | 1 |
| 11***35 | Screw-Adjustment | 1 |
277-6551 Rotating Gp-Pump
| 10***65 | Circlip | 1 |
| 11***57 | Pin | 1 |
| 11***38 | Piston | 9 |
272-0169 Shaft Gp-Drive -High Speed Axle
| 10***26 | Bolt; (M24x19.1-mm) | 8 |
| 27***69 | Shaft Group-Drive; -High Speed Axle | 1 |
| 31***31 | Shaft As-Drive | 1 |
272-0167 Shaft Gp-Drive -Standard Axle
| 10***26 | Bolt; (M24x19.1-mm) | 8 |
| 27***67 | Shaft Group-Drive; -Standard Axle | 1 |
| 31***30 | Shaft As-Drive | 1 |
259-2944 Tire & Rim Gp -Lh
| 14***73 | Valve Group-Tire | 1 |
| 25***40 | Tire; (340/80-R18) | 1 |
| 25***43 | Rim As; (11x18) | 1 |
295-4006 Tire & Rim Gp
| 14***75 | Tire; (12.5-18) | 1 |
| 14***73 | Valve Group-Tire | 1 |
| 25***43 | Rim As; (11x18) | 1 |
259-2952 Tire & Rim Gp
| 14***73 | Valve Group-Tire | 1 |
| 25***52 | Tire & Rim Group | 1 |
| 25***53 | Rim As; (10x17.5) | 1 |
259-2949 Tire & Rim Gp
| 14***73 | Valve Group-Tire | 1 |
| 25***43 | Rim As; (11x18) | 1 |
| 25***49 | Tire & Rim Group | 1 |
259-2815 Tire & Rim Gp
| 14***73 | Valve Group-Tire | 1 |
| 18***01 | Tire; (405/70-R18) | 1 |
| 25***15 | Tire & Rim Group | 1 |
259-2941 Tire & Rim Gp -Rh
| 14***73 | Valve Group-Tire | 1 |
| 25***40 | Tire; (340/80-R18) | 1 |
| 25***41 | Tire & Rim Group; -Rh | 1 |
259-2945 Tire & Rim Gp
| 14***73 | Valve Group-Tire | 1 |
| 18***75 | Tire; (335/80-R18) | 1 |
| 25***43 | Rim As; (11x18) | 1 |
295-4005 Tire & Rim Gp
| 14***75 | Tire; (12.5-18) | 1 |
| 14***73 | Valve Group-Tire | 1 |
| 25***43 | Rim As; (11x18) | 1 |
260-5411 Valve & Mtg Gp-Solenoid -Axle Speed Select
| 10***08 | Kit-Seal; (Solenoid Valve, Quick Steer) | 1 |
| 23***26 | Coil As | 2 |
| 24***60 | Valve Group-Solenoid | 1 |
289-6366 Valve Gp-Flushing -Hydrostatic Drive Motor
| 10***17 | Seal-O-Ring | 2 |
| 12***81 | Bolt-Socket Head; (M10x1.5x55-mm) | 4 |
| 17***15 | Seal-O-Ring | 1 |
289-6383 Valve Gp-Pilot -Hydrostatic Drive Motor
| 12***69 | Plug | 2 |
| 21***75 | Seal-O-Ring | 1 |
| 26***69 | Solenoid As; (Pilot Valve) | 1 |
300-7541 Valve Gp-Pump Control -Hydrostatic
| 11***73 | Seal-O-Ring | 2 |
| 12***62 | Seal-O-Ring | 1 |
| 14***10 | Cover | 1 |
152-1811 Valve Gp-Relief -Pressure Override
| 12***63 | Kit-Seal; (Contains Parts Marked J) | 1 |
| 15***11 | Valve Group-Relief; -Pressure Override-Hydrostatic Pump | 1 |
| 6E***07 | Locknut-Sealing | 1 |
292-5404 Wheel & Brake Gp -Front
| 16***46 | Bolt; (M12x1.75x18-mm) | 8 |
| 20***53 | Gear; (60-Teeth) | 1 |
| 20***58 | Bushing | 8 |
301-7787 Wheel & Fender Ar
| 25***43 | Fender Group-Rear | 1 |
| 26***92 | Fender Group-Front | 1 |
| 27***77 | Mounting Group-Axle | 1 |
301-7785 Wheel & Fender Ar
| 25***43 | Fender Group-Rear | 1 |
| 25***46 | Wheel & Tire Group | 1 |
| 26***92 | Fender Group-Front | 1 |
332-1834 Wheel & Fender Ar
| 25***43 | Fender Group-Rear | 1 |
| 26***92 | Fender Group-Front | 1 |
| 27***77 | Mounting Group-Axle | 1 |
301-7781 Wheel & Fender Ar
| 25***43 | Fender Group-Rear | 1 |
| 25***51 | Wheel & Tire Group | 1 |
| 26***92 | Fender Group-Front | 1 |
301-7786 Wheel & Fender Ar
| 25***43 | Fender Group-Rear | 1 |
| 25***42 | Wheel & Tire Group | 1 |
| 26***92 | Fender Group-Front | 1 |
301-7782 Wheel & Fender Ar
| 25***43 | Fender Group-Rear | 1 |
| 25***39 | Wheel & Tire Group | 1 |
| 26***92 | Fender Group-Front | 1 |
295-4004 Wheel & Tire Gp
| 20***19 | Nut; (M20x1.5-Thd) | 32 |
| 29***04 | Wheel & Tire Group | 1 |
| 29***05 | Tire & Rim Group | 2 |
259-2939 Wheel & Tire Gp
| 20***19 | Nut; (M20x1.5-Thd) | 32 |
| 25***15 | Tire & Rim Group | 4 |
| 25***39 | Wheel & Tire Group | 1 |
259-2942 Wheel & Tire Gp
| 20***19 | Nut; (M20x1.5-Thd) | 32 |
| 25***41 | Tire & Rim Group; -Rh | 2 |
| 25***42 | Wheel & Tire Group | 1 |
259-2946 Wheel & Tire Gp
| 20***19 | Nut; (M20x1.5-Thd) | 32 |
| 25***45 | Tire & Rim Group | 4 |
| 25***46 | Wheel & Tire Group | 1 |
331-3193 Wheel & Tire Gp
| 20***19 | Nut; (M20x1.5-Thd) | 32 |
| 25***49 | Tire & Rim Group | 4 |
| 33***93 | Wheel & Tire Group | 1 |
259-2951 Wheel & Tire Gp
| 20***19 | Nut; (M20x1.5-Thd) | 32 |
| 25***51 | Wheel & Tire Group | 1 |
| 25***52 | Tire & Rim Group | 4 |
Service Equipment And Supplies
303-2126 Chock Gp-Wheel
303-0389 Film Gp -Machine Identification
300-4086 Film Gp -International
300-4085 Film Gp -U.S.
304-9376 Plate & Film Gp -Environmental
304-1725 Plate & Film Gp
Steering System
257-3976 Cylinder Gp-Steering
| 09***02 | Ring | 1 |
| 14***10 | Seal-Buffer | 1 |
| 14***77 | Seal-U-Cup | 1 |
274-6572 Lines Gp-Steering
| 11***74 | Seal | 1 |
| 14***18 | Connector As | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
293-4351 Lines Gp-Steering
| 11***74 | Seal | 1 |
| 14***18 | Connector As | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
259-2850 Mounting Gp-Steering Cylinder
| 25***50 | Mounting Group-Steering Cylinder | 1 |
| 25***77 | Pin | 1 |
| 30***83 | Plate | 1 |
260-5420 Pump Gp-Metering -Hmu
| 25***36 | Bearing | 1 |
| 25***71 | Kit-Seal; (Metering Pump, Steering) | 1 |
| 26***20 | Pump Group-Metering; -Hmu-Boosted Auxiliary Hydraulic Flow | 1 |
257-3927 Pump Gp-Metering -Hmu
| 25***36 | Bearing | 1 |
| 25***27 | Pump Group-Metering; -Hmu-Standard Flow | 1 |
| 29***02 | Kit-Seal; (Hmu Steering Pump) | 1 |
300-8485 Steering Ar -Boosted Auxiliary Hydraulic Flow
| 26***20 | Pump Group-Metering; -Hmu-Boosted Auxiliary Hydraulic Flow | 1 |
| 27***72 | Lines Group-Steering | 1 |
| 30***85 | Receiver-Dryer, Receiver-Dryer; Dryer, Steering Ar; -Boosted Auxiliary Hydraulic Flow | 1 |
282-7722 Steering Ar -Standard
| 25***27 | Pump Group-Metering; -Hmu-Standard Flow | 1 |
| 28***22 | Steering Ar; -Standard | 1 |
| 29***51 | Lines Group-Steering | 1 |
282-7723 Steering Ar -Boosted Auxiliary Hydraulic Flow
| 26***20 | Pump Group-Metering; -Hmu-Boosted Auxiliary Hydraulic Flow | 1 |
| 28***23 | Steering Ar; -Boosted Auxiliary Hydraulic Flow | 1 |
| 29***51 | Lines Group-Steering | 1 |
Work Tools
216-8756 Arm Gp-Material Handling
| 15***62 | Film-Information; (Tie-Down Location) | 2 |
| 18***33 | Step Group-Material Handling Arm | 1 |
| 21***56 | Arm Group-Material Handling | 1 |
284-9280 Bucket Ar-General Purpose
| 14***99 | Tooth Group-Uni | 7 |
| 26***41 | Bucket Group-General Purpose | 1 |
| 28***80 | Bucket Ar-General Purpose | 1 |
284-9281 Bucket Ar-General Purpose
| 14***03 | Edge Group-Cutting | 1 |
| 26***30 | Bucket Group-General Purpose | 1 |
| 28***81 | Bucket Ar-General Purpose | 1 |
284-9279 Bucket Ar-General Purpose
| 14***03 | Edge Group-Cutting | 1 |
| 26***41 | Bucket Group-General Purpose | 1 |
| 28***79 | Bucket Ar-General Purpose | 1 |
312-0123 Bucket Ar-General Purpose
| 14***99 | Tooth Group-Uni | 9 |
| 31***21 | Bucket Group-General Purpose | 1 |
| 31***23 | Shim 1.500 mm , Rear Axle, Bucket Ar-General Purpose | 1 |
312-0122 Bucket Ar-General Purpose
| 13***87 | Edge Group-Cutting | 1 |
| 31***21 | Bucket Group-General Purpose | 1 |
| 31***22 | Bucket Ar-General Purpose | 1 |
311-7777 Bucket Ar-General Purpose
| 14***99 | Tooth Group-Uni | 9 |
| 31***75 | Bucket Group-General Purpose | 1 |
| 31***77 | Bucket Ar-General Purpose | 1 |
311-7776 Bucket Ar-General Purpose
| 13***87 | Edge Group-Cutting | 1 |
| 31***75 | Bucket Group-General Purpose | 1 |
| 31***76 | Bucket Ar-General Purpose | 1 |
284-9282 Bucket Ar-General Purpose
| 14***99 | Tooth Group-Uni | 7 |
| 26***30 | Bucket Group-General Purpose | 1 |
| 28***82 | Bucket Ar-General Purpose | 1 |
261-1385 Bucket Ar-Light Material
| 13***37 | Edge; (2060mm) | 1 |
| 14***04 | Edge Group-Cutting | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
261-1391 Bucket Ar-Light Material
| 13***37 | Edge; (2060mm) | 1 |
| 14***04 | Edge Group-Cutting | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
284-9286 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 7 |
| 26***00 | Bucket Ar-Multipurpose | 1 |
| 28***86 | Bucket Ar-Multipurpose | 1 |
284-9284 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 7 |
| 28***44 | Bucket Ar-Multipurpose | 1 |
| 28***84 | Bucket Ar-Multipurpose | 1 |
284-9283 Bucket Ar-Multipurpose
| 14***03 | Edge Group-Cutting | 1 |
| 28***44 | Bucket Ar-Multipurpose | 1 |
| 28***83 | Bucket Ar-Multipurpose | 1 |
263-8700 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***39 | Cylinder Group-Multipurpose Bukt | 2 |
284-9285 Bucket Ar-Multipurpose
| 14***03 | Edge Group-Cutting | 1 |
| 26***00 | Bucket Ar-Multipurpose | 1 |
| 28***85 | Bucket Ar-Multipurpose | 1 |
284-2844 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***39 | Cylinder Group-Multipurpose Bukt | 2 |
311-7778 Bucket As-General Purpose
| 13***32 | Edge; (1880-mm) | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
312-0124 Bucket As-General Purpose
| 13***32 | Edge; (1880-mm) | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
261-1341 Bucket Gp-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***05 | Film-Identification; (Bucket Level)(Bucket Level Indicator) | 2 |
261-1330 Bucket Gp-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***05 | Film-Identification; (Bucket Level)(Bucket Level Indicator) | 2 |
311-7775 Bucket Gp-General Purpose
| 13***32 | Edge; (1880-mm) | 1 |
| 17***72 | Film-Identification; (Bucket Level)(Bucket Level Indicator) | 2 |
| 25***22 | Bulldozer As | 1 |
312-0121 Bucket Gp-General Purpose
| 13***32 | Edge; (1880-mm) | 1 |
| 17***72 | Film-Identification; (Bucket Level)(Bucket Level Indicator) | 2 |
| 25***23 | Clam As; (Multipurpose Bucket) | 1 |
259-6021 Bucket Gp-Multipurpose
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***21 | Bucket Group-Multipurpose | 1 |
263-8701 Bucket Gp-Multipurpose
261-1350 Carriage Gp-Fork
260-1716 Carriage Gp-Fork
257-4023 Coupler Ar-Quick -Vertical Pin Lock-Vertical
281-2340 Coupler Ar-Quick -Vertical Pin Lock, Boosted Auxiliary Hydraulic Flow
257-4024 Coupler Ar-Quick -Horizontal Pin Lock
237-5559 Coupler Gp-Quick -Horizontal Pin Lock
274-1326 Coupler Gp-Quick -Vertical Pin Lock
135-9387 Edge Gp-Cutting
141-5004 Edge Gp-Cutting
141-5003 Edge Gp-Cutting
243-0003 Fork Gp-Pallet -Kit
149-7665 Fork Gp-Pallet
243-0001 Fork Gp-Pallet -Kit
195-6942 Fork Gp-Pallet
195-8545 Fork Gp-Pallet
161-2437 Fork Gp-Pallet
195-6943 Fork Gp-Pallet
243-0002 Fork Gp-Pallet -Kit
209-3477 Guard Gp-Bucket -Roading
270-2515 Lock Gp-Mechanical -Quick Coupler
188-7733 Step Gp-Material Handling Arm
141-4999 Tooth Gp-Uni
907H serial number reference
The PIN/serial plate sits on the left-hand side of the machine, ahead of the cab and near the left front tire. On 2001-and-later machines the serial is the last 8 characters of the 17-character PIN: the first 3 of those 8 are the letter prefix (identifies model/generation), followed by a 5-digit sequence number stamped on the plate itself.
| Prefix | Identifies | Notes |
|---|---|---|
| MJF | 907H, first machine arrangement | Base 907H compact wheel loader. Cat 3044C DIT engine (marketed as Cat C3.4), 4-cylinder turbocharged direct injection. Net power 51 kW (68 hp), gross power 55 kW (74 hp). Earliest production run for this model, dating from around 2007. |
| SJM | 907H, later machine arrangement | Same 907H platform and engine as the MJF-prefix run (3044C DIT / C3.4). Follows MJF in the production sequence, dating from around 2008. Specific running changes separating it from MJF are not documented for this exact serial range - verify with your dealer. |
| JRS | 907H2 (emissions-update generation) | Updated 907H2 generation, not the original 907H. Fitted with Cat C3.3B DIT engine meeting Tier 4 Interim/Stage IIIB emission standards. Net power is close to the earlier 907H (51-52 kW / 68-69 hp), gross power 55 kW (74 hp) - the update changes emissions tier and engine internals, not headline power output. Confirm with dealer whether this generation is in scope alongside base 907H. |
Frequently asked questions
What engine does the Caterpillar 907H use?
The 907H runs the Cat C3.4 DIT engine, built on the 3044C DIT platform. It is a Tier 3, four-cylinder diesel rated at roughly 51-52 kW (68-70 hp) net. Its successor, the 907H2, switched to the Cat C3.3B DIT engine under Tier 4 Interim rules - the two engines are not interchangeable, so confirm which generation you have before sourcing parts.
What is the operating weight of the Cat 907H?
Factory operating weight is approximately 5,810 kg (12,809 lb) for the standard configuration. Actual weight varies with cab type, tire choice, counterweight, and attached work tools, so treat this as a baseline rather than an exact figure for load or transport planning.
What replaced the Caterpillar 907H?
Caterpillar replaced the 907H with the 907H2, which carries the Cat C3.3B DIT engine and meets Tier 4 Interim emissions standards with added aftertreatment hardware. The lineage continued afterward through the M-series and later Next Generation 906/907/908 compact wheel loaders.
What 907H owners discuss
What engine does the 907H run, and are there any known quirks with it?
This generation runs the Cat C3.4 DIT (marketed as the 3044C DIT), Tier 3, with no DPF or SCR aftertreatment. The later 907H2 switched to a C3.3B DIT with its own emissions system - treat it as a different engine family, don't cross-apply service data between the two. Reported "engine won't shut off" complaints on a 907H of this generation traced back to the fuel shutoff solenoid and a failing alternator backfeeding voltage into the shutoff circuit, not an engine fault. If the machine keeps running after the key is turned off, check alternator output and solenoid coil wiring before condemning the injection pump. Have your dealer verify alternator regulation and solenoid wiring before replacing parts.
How does the two-speed hydrostatic drive typically behave, and what wears first?
The 907H shares its hydrostatic drivetrain architecture with the 906H and 908H. Sluggish acceleration, delayed direction changes, or a drive that feels heavy/boggy is most often reported as a charge-circuit issue - low hydraulic fluid, a weak charge pump, or a clogged charge filter - rather than a fault in the main drive pump or motor. Owners consistently check fluid level and condition first before assuming a drive-motor failure. Have your dealer verify charge pressure against spec before condemning the pump or motor.
What causes the machine to suddenly lose drive or drop into neutral?
No-crank or no-move complaints across this loader family point first to the transmission neutral-start switch, a range sensor sticking, or an E-stop switch not fully reset. Separately, on machines fitted with factory telematics, owners on the shared 906H/908H platform have documented the remote monitoring module sending a corrupted data message that forces the transmission into neutral while the machine is moving - unnerving, but a recognized telematics fault rather than driveline damage. Have your dealer verify telematics module wiring and firmware if unexplained neutral drops happen while driving.
Are there known sensor or electrical wear items on this machine?
Wheel/transmission speed sensors are a commonly cited wear-and-replace item on this loader family. Drift or failure shows up as surging in a given gear, inconsistent shift points between low and high range, or a top speed that won't reach the rated figure in high range. Community troubleshooting starts with the sensor air gap and harness continuity before assuming a transmission mechanical fault.
What linkage or wear-point issues come up most for this machine type?
The 907H steers on conventional axles, not a wheel-loader articulation joint, so the recurring wear items are the Z-bar loader linkage pins and bushings - boom pins, tilt-cylinder pins, tilt-rod-end pins, and bucket pivot pins. Reported symptoms of worn pins include excess side play, clunking under load, and uneven grease acceptance at the zerks. Consistent daily greasing (more often in wet or sandy conditions) is the community consensus for extending pin life, and skipped greasing is the most cited root cause of early play.
What hydraulic attachment issues come up in the field?
Owners report difficulty connecting or disconnecting the hydraulic quick coupler (standard skid-steer style coupler on this model) when residual pressure is trapped in the auxiliary circuit. The fix cited consistently: shut the engine off, then cycle the aux control levers a few times to bleed trapped pressure before trying to couple or uncouple. Coupler binding or leakage that doesn't clear with pressure relief points to worn coupler halves or a stuck relief valve. Have your dealer verify the aux relief valve setting if trapped pressure recurs.
What should I check before buying a used 907H?
Consensus checklist from field inspections: compare hour meter reading against overall wear and paint condition, check every Z-bar linkage pin for play, inspect tilt and lift cylinders for leaks or rod scoring, check the bucket cutting edge and wear plates, look for cuts or cracking in the tires, check final drive housings for leaks, and run the hydrostatic drive through both ranges to confirm crisp response (sluggish response signals charge-pump or fluid condition to negotiate on). This generation has no DPF or regen system, so service history mostly reflects engine and hydraulic component upkeep rather than aftertreatment maintenance. Have your dealer pull the service/fault-code history and pressure-test the hydrostatic and implement circuits before finalizing an offer.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 907H part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.