Caterpillarwheel-type loadercompact wheel loader
Caterpillar 906H
Maintenance schedule, common problems & OEM parts breakdown
The Cat 906H is a compact articulated wheel loader powered by a Cat C3.4 turbocharged diesel: four cylinders, 3.4 L, mechanical fuel system, rated 52 kW (70 hp) net at 2500 rpm, meeting Tier 3 emissions with no diesel particulate filter or regeneration cycle. Drive is hydrostatic with a two-speed range, hydraulic dry disc brakes, and standard differential lock on both axles. Operating weight runs around 5,630 kg (12,412 lb) with a standard bucket and varies with counterweight and attachment. Caterpillar built the 906H roughly from 2007 through the mid-2010s as the entry point of the H-Series compact wheel loader line alongside the 907H and 908H, which share the same C3.4 platform tuned to different power and weight points. It followed an earlier pre-H compact wheel loader generation built around smaller Cat diesels, and it was replaced by the 906H2 around 2015. Cat offered the 906H with general-purpose and light-material buckets, forks, and a wide range of skid-steer-style hydromechanical work tools through its quick coupler.
Across the H-Series, the 906H, 907H, and 908H differ mainly in engine tune, bucket size, and counterweight rather than chassis design; all three share the articulated oscillating frame, Z-bar linkage, and outboard planetary axle layout. The bigger shift came with the 2015 906H2 update, which kept the same footprint but switched to a Tier 4 Interim Cat C3.3B engine with a diesel particulate filter and active regeneration, rotated the engine 180 degrees for ground-level service access, and added a revised loader valve with standard pilot joysticks. That puts the 906H entirely on the pre-DPF side of the family: no regen cycles, no exhaust aftertreatment service, and a mechanical fuel system that keeps troubleshooting straightforward. In the used and parts market, that simplicity is the draw. 906H units cost less to keep running than 906H2 or 906M machines, share axle, linkage, and hydrostatic-drive components with the wider H-Series family, and remain a practical low-cost loader or parts donor for owners who want to avoid aftertreatment maintenance entirely.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 906H specifications
Engine
| Engine model | Cat C3.4, 4-cylinder in-line, liquid-cooled diesel |
| Gross power | 55.2 kW (74 hp) at 2,500 rpm |
| Net power | 52.2 kW (70 hp) at 2,500 rpm |
| Displacement | 3.4 L (203 cu in / 3,327 cc) |
| Bore and stroke | 94 mm x 120 mm (3.7 in x 4.7 in) |
| Emissions tier | Tier 3 / Stage IIIA, consistent with this machine's production window; verify against the specific serial/engine plate for your unit |
Weights
| Operating weight (standard configuration) | 5,630 kg (12,412 lb) with general-purpose bucket |
| Shipping weight | Not published separately in available spec literature for this model — confirm crated/transport weight with your dealer |
Dimensions
| Overall length (bucket on ground) | 5,585 mm (18.3 ft / 219.9 in) |
| Width over tires | 1,840 mm (6.0 ft / 72.4 in) |
| Height to top of cab | 2,465 mm (8.1 ft / 97.0 in) |
| Wheelbase | 2,170 mm (7.1 ft / 85.4 in) |
| Ground clearance | 300 mm (1.0 ft / 11.8 in) |
| Hinge pin height, max lift | 3,230 mm (10.6 ft / 127.1 in) |
| Reach at max lift and dump | approx. 0.81 m (2.7 ft) |
Performance
| Travel speed, low range | approx. 7 km/h (4.3 mph) |
| Travel speed, high range (max, forward and reverse) | 20 km/h (12.4-12.5 mph) |
| Breakout force | 4,290 kg (9,440 lb) |
| Rated operating capacity, full turn | 1,580 kg (3,483 lb) |
| Rated operating capacity, straight | 1,993 kg (4,392 lb) |
| Static tipping load, full turn | 3,160 kg (6,967 lb) |
| Static tipping load, straight | 3,985 kg (8,785 lb) |
| Loader hydraulic cycle times | raise approx. 5 sec, dump approx. 2 sec, lower (power-down) approx. 4 sec |
Service capacities (summary)
| Fuel tank | 52 L (13.8 gal) |
| Hydraulic system | 84 L (22.2 gal) |
| Engine oil | 10 L (2.7 gal) |
| Cooling system | 24 L (6.4 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
906H fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat C3.4 diesel | 9.9-10.0 L (2.6 US gal) | Cat DEO-ULS multigrade, SAE 10W-30 for general ambient use (-18 C to 40 C / 0 F to 104 F). Cat DEO-ULS Cold Weather (0W-40) for sustained sub-zero starts down to -40 C. SAE 15W-40 acceptable in consistently warm climates. Meets Cat ECF-3 / API CJ-4 performance. |
| Cooling system | 23.9-24.0 L (6.3 US gal) | Cat ELC (Extended Life Coolant), factory pre-mixed 50/50 concentration, freeze protection to about -37 C (-34 F). Cat DEAC conventional coolant/antifreeze acceptable where ELC is not stocked, per OMM service schedule. |
| Fuel tank | 51.9-52.0 L (13.7 US gal) | No. 2-D ultra-low-sulfur diesel meeting ASTM D975 (or regional equivalent). Biodiesel blends up to the limit stated in the OMM are permitted; use winter-blend fuel or a fuel conditioner in cold climates to prevent gelling. |
| Hydrostatic transmission / hydraulic system (combined tank) | 84.0-84.1 L (22.2 US gal) | Cat HYDO Advanced 10 multi-viscosity hydraulic/drive-train oil (meets Cat TO-4). Cat HYDO Advanced 5 for cold-climate startup, Cat HYDO Advanced 30 for sustained hot-climate operation. This compact wheel loader's hydrostatic drive circuit and implement hydraulics share one reservoir, so the OMM does not list a separate transmission fill volume. |
| Axles / final drives (each, front and rear) | Not broken out as a separate refill volume in available spec sheets for this model - check level per OMM dipstick/plug procedure and confirm exact fill with your dealer. | Cat TDTO (Transmission and Drive Train Oil, meets Cat TO-4), viscosity grade selected by ambient temperature per the OMM chart; used across the axle housings, differential, and outboard planetary final drives. |
| Grease (chassis and pin lubrication points) | Spec only - no reservoir capacity, applied per lube point per the OMM lubrication schedule. | Cat Prime Application Grease (PAG), NLGI 2, for general-duty pins and bushings. Cat Advanced 3Moly Grease for high-load/shock-load points (e.g. bucket linkage) where extra film strength is called for. Cat Extreme Application Grease (XAG) as an option for sustained high-temperature service. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 906H maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 906H beyond the schedule
Predictive Maintenance & Fluid Analysis
The 906H's mechanical C3.4 engine and hydrostatic drive give few electronic warnings, so scheduled S·O·S sampling of engine oil, hydraulic oil, and both axle differential/final-drive sumps is the main early-warning tool. Track hydrostatic case-drain flow and pump/motor temperature to catch drive efficiency loss before it becomes a stall. Watch coolant condition and turbocharger boost pressure trends, since a slow boost leak or coolant additive depletion on this mechanically governed engine won't trigger a dash alert the way a Tier 4 unit would.
Corrective & Common Repairs
Common 906H repairs center on the hydrostatic drive: surging or power loss usually traces to a clogged charge filter or contaminated hydraulic oil rather than the pump itself. Z-bar linkage pins and bushings wear from articulated-frame twisting and need periodic replacement to hold bucket geometry. Disc brake wear accelerates on machines running heavy oscillation cycles on rough yards. The skid-steer-style quick coupler pins and wedge lock also wear with frequent attachment changes. Mechanical injectors and turbocharger boost hoses are the usual sources of a rough-running C3.4.
Overhaul & Rebuild Points
High-hour 906H rebuilds typically hit the hydrostatic pump and drive motor first, followed by the outboard planetary final drives and differential in both axles. Loader linkage pins, bushings, and the Z-bar tower bearing wear from cyclic loading and are a standard mid-life rebuild item. The mechanical fuel system and turbocharger on the C3.4 allow a straightforward in-frame top-end rebuild, injectors, liners, turbo cartridge, without ECM recalibration. Articulation center-pin and bushing wear should be checked before any major structural or driveline overhaul.
Seasonal & Environment Servicing
Cold-climate 906H operation calls for checking glow-plug/ether-start function on the mechanical C3.4, testing coolant freeze protection, and switching to a winter-grade hydraulic oil so the hydrostatic drive responds normally at startup. In hot, dusty environments, shorten air filter and radiator/oil-cooler cleaning intervals, since the compact engine bay traps debris quickly. Grease intervals for the Z-bar linkage and articulation joint should tighten in muddy or abrasive conditions. Check tire pressure more often in high heat, since the tires run hotter under sustained load.
906H common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
| 270-9018 | Filter Element As-Cab Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
| 1R-0734 | Filter-Engine Oil | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
906H fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| E360 | Low engine oil pressure event. Machine display flags an actual measured low-pressure condition at the engine oil pressure sensor, not just a wiring fault. | Low oil level, worn oil pump, plugged oil pickup screen, or a failing oil pressure sensor. | Shut down and check oil level and condition first. If level is correct, verify actual pressure with a mechanical test gauge before condemning the pump or sensor. |
| E283 | Low hydraulic charge pressure event tied to the charge pump that feeds the hydrostatic drive pump and supplies piston-shoe lubrication for the transmission. | Low hydraulic oil level, a worn or failing charge pump, a clogged hydraulic filter, or internal wear in the hydrostatic pump or drive motor. | Check hydraulic oil level and filter condition, then verify charge pressure at the test port with a diagnostic gauge before replacing pump components. |
| E627 | Parking brake applied while the machine is moving above a set travel-speed threshold. Logged to flag brake abuse, not a component failure. | Operator engaging the parking brake switch to slow or stop the machine instead of using the service brake and coming to a full stop first. | Confirm the parking brake switch and travel-speed input are working correctly, then correct operator habit of using the parking brake to stop a moving machine, which accelerates brake wear. |
| E361 | High engine coolant temperature event, active once coolant temperature holds above the normal operating threshold for a sustained period. | Low coolant level, a plugged or damaged radiator core, a slipping or worn fan belt, a stuck thermostat, or a failing cooling fan. | Let the engine cool, check coolant level and condition, inspect the radiator core and fan belt/drive, then confirm actual temperature with a scan tool before further teardown. |
| 110-3 | Engine coolant temperature sensor circuit reads voltage above the normal range, an open-circuit or short-to-supply condition rather than a confirmed overheat. | Damaged sensor wiring or connector, a failed coolant temperature sensor, or corrosion at the connector. | Inspect sensor wiring and connector for damage or corrosion, test sensor output against spec, then replace the sensor if it is out of range. |
| 542 | Engine oil pressure sensor circuit code (sensor located before the oil filter), read through Caterpillar Electronic Technician rather than shown as a dash event. | Damaged sensor wiring or connector, sensor failure, or corrosion at the connector rather than an actual pressure problem. | Check sensor wiring and connector condition, confirm actual oil pressure with a mechanical gauge, then test or replace the sensor as needed. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
906H attachments & work tools
Buckets
General purpose, multi-purpose, light-material, and side-dump buckets are offered for this class. Rated heaped capacity runs about 0.92-0.95 m³ (1.2 yd³), with a broader working range of roughly 0.76-1.22 m³ (1.0-1.6 yd³) depending on bucket style, and a width near 1.89 m (6.2 ft). Standard general-purpose buckets ship with a bolt-on cutting edge; bolt-on or segmented teeth are available as an upgrade for tougher digging.
Pallet forks / material handling forks
Pallet forks are a common work tool for this size class, typically in the Class II tine range. Rated operating load with forks on firm, level ground at a 500 mm load center is about 2,720 kg (5,997 lb) per EN 474-3 methodology. Fork lift capacity was increased versus the prior-generation loader when the H-series was introduced.
Coupler / mounting system
Work tools mount via a hydraulically actuated, universal skid-steer-loader-style quick coupler, letting tools change out without separate tooling. This coupler carries over the hydromechanical work-tool compatibility from Cat skid steer, multi-terrain, and compact track loaders, so a fleet already running those tools can share attachments with this wheel loader. Auxiliary hydraulic lines and connectors are standard equipment at the coupler.
Hydraulic flow / auxiliary circuit arrangement
The base hydraulic system delivers roughly 22 gpm (83 L/min) through the loader/auxiliary circuit, controlled through a proportional third-function valve for continuous-flow tools. An optional high-flow package steps auxiliary output up to about 33 gpm (125 L/min) for demanding hydraulically driven tools; the loader control valve also allows working the auxiliary circuit and loader arms at the same time.
Brooms
Pickup, utility, and angle brooms are available in this coupler family. Pickup brooms sweep material into an integrated hopper for dumping, utility brooms clear light debris on smooth surfaces in either travel direction, and angle brooms windrow debris to the side.
Snow removal and other high-flow powered tools
Two-stage snow blowers (auger plus impeller), augers, and cold planers are supported through the coupler but need the optional high-flow hydraulics to run properly. These are grouped with brooms and other powered tools as the demanding end of the work-tool lineup for this class.
Factory configurations and guarding
Operator station is offered as canopy or enclosed cab; the cab version is a low-profile build (about 2.46 m / 8 ft 1 in tall) for confined or indoor work. Optional extras affecting attachment use include a ride-control system to reduce material spillage and smooth travel with a loaded bucket or forks, and a high-speed travel package. Machines are built with standard guarding on the underbody and work-tool area for this duty class.
Series/generation notes
This coupler, bucket, and work-tool lineup applies to the H-series compact wheel loader generation as a family. The engine changed at the H2 update (moving off the earlier engine used in this model), but the work-tool coupler, auxiliary hydraulic arrangement, and available tool families carried forward unchanged. Exact bucket and fork figures vary by configuration within the series, so confirm exact capacity for a specific serial range with your dealer.
All 906H assemblies by section
Every catalogued assembly group for the Caterpillar 906H. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
242-5900 Air Cleaner Gp
| 10***55 | Hose (400 cm) | 0 |
| 14***07 | Clamp-Hose | 1 |
| 23***68 | Gasket; (Rear Head) | 1 |
308-3010 Air Cleaner Gp -With Precleaner
| 10***55 | Hose (400 cm) | 0 |
| 13***79 | Precleaner Group; -Turbine | 1 |
| 14***07 | Clamp-Hose | 1 |
272-2445 Air Cleaner Gp
| 11***56 | Air Cleaner Group | 1 |
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
316-0471 Lines Gp-Air
| 19***22 | Bolt As; (M8x1.25x22-mm) | 4 |
| 27***82 | Clip | 2 |
| 31***40 | Elbow | 1 |
241-5985 Manifold Gp-Exhaust
| 19***60 | Nut; (M8x1.25-Thd) | 8 |
| 23***24 | Gasket-Manifold | 1 |
| 23***04 | Washer | 8 |
302-7815 Manifold Gp-Inlet
| 09***49 | Bolt; (M8x1.25x40-mm) | 14 |
| 23***05 | Manifold-Inlet | 1 |
| 23***06 | Gasket; (Inlet Manifold) | 1 |
242-5815 Muffler Gp
| 23***47 | Clamp-Muffler | 1 |
| 24***15 | Muffler Group | 1 |
| 26***68 | Muffler As | 1 |
299-4445 Pipe Gp-Exhaust
| 10***54 | Gasket-Exhaust | 1 |
| 21***99 | Stud | 4 |
| 29***45 | Pipe Group-Exhaust | 1 |
331-6308 Turbocharger Gp
| 09***00 | Washer; (1.5mm Thk) | 3 |
| 19***06 | Gasket | 2 |
| 23***22 | Clamp | 2 |
Basic Engine
292-4041 Bearing Gp-Main
| 10***88 | Plate-Thrust; (Standard) | 3 |
| 10***89 | Plate-Thrust; (0.15-mm Os) | 0 |
| 10***90 | Plate-Thrust; (0.35-mm Os) | 0 |
315-8329 Camshaft Gp
| 09***28 | Key | 1 |
| 10***72 | Tappet | 8 |
| 10***73 | Rod-Push | 8 |
287-4033 Connecting Rod Gp
| 10***80 | Rod As-Connecting | 4 |
| 12***55 | Bolt-Connecting Rod | 2 |
| 12***56 | Nut | 2 |
233-5480 Cover Gp-Valve Mechanism
| 23***80 | Cover Group-Valve Mechanism | 1 |
| 23***83 | Gasket; (Valve Cover) | 1 |
| 31***98 | Cap-Oil Filler; (Engine) | 1 |
314-9860 Crankshaft Gp
| 08***13 | Pin | 2 |
| 09***28 | Key | 2 |
| 13***96 | Nut | 1 |
330-7633 Cylinder Block Gp
| 09***41 | Cap | 10 |
| 09***20 | Pin | 2 |
| 10***76 | Bolt-Bearing Cap | 10 |
233-5500 Cylinder Head Gp
| 10***46 | Bolt-Cylinder Head | 17 |
| 10***47 | Guide-Valve | 8 |
| 10***52 | Seat-Valve; (Inlet) | 4 |
284-4005 Drain Gp-Engine Oil
| 12***76 | Nut; (M14x1.5-Thd) | 1 |
| 23***58 | Elbow | 1 |
| 28***05 | Drain Group-Engine Oil | 1 |
314-9861 Flywheel Gp
| 03***39 | Gear-Starter; (112-Teeth) | 1 |
| 22***93 | Bolt; (M12x1.25x30-mm) | 6 |
| 23***91 | Flywheel As | 1 |
315-7766 Gear Gp-Front
| 11***27 | Gear; (46-Teeth) | 1 |
| 11***29 | Gear; (23-Teeth) | 1 |
| 11***85 | Gear-Pump; (Oil, 31-Teeth) | 1 |
315-2631 Guard Gp-Belt
| 16***04 | Spacer; (6.5x9.5x10-mm Thk) | 4 |
| 27***24 | Grommet | 4 |
| 31***21 | Bracket | 1 |
311-6316 Guard Gp-Belt
| 16***04 | Spacer; (6.5x9.5x10-mm Thk) | 5 |
| 27***24 | Grommet | 5 |
| 31***16 | Guard Group-Belt | 1 |
316-1621 Housing Gp-Flywheel
| 10***80 | Gasket-Rear | 1 |
| 11***15 | Seal As-Oil | 1 |
| 14***17 | Bolt; (M10x1.25x25-mm) | 10 |
315-8336 Housing Gp-Front
| 09***00 | Washer; (1.5mm Thk) | 2 |
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 19***12 | Bolt; (M6x1x18-mm) | 4 |
239-8495 Lifting Gp-Engine
| 23***68 | Gasket; (Rear Head) | 1 |
| 23***87 | Eye-Lifting; (Front Head) | 1 |
| 23***95 | Lifting Group-Engine | 1 |
255-6009 Mounting Gp-Engine
| 16***95 | Washer; (16.5x71.5x3-mm Thk) | 4 |
| 25***09 | Mounting Group-Engine | 1 |
| 26***88 | Plate | 1 |
314-9852 Pan Gp-Oil
| 16***01 | Sealant-Silicone | 1 |
| 23***11 | Washer | 1 |
| 28***22 | Pan As-Oil | 1 |
315-8348 Piston Gp
| 21***97 | Ring | 8 |
| 23***15 | Pin-Piston | 4 |
| 31***62 | Ring-Piston; (Standard) | 4 |
287-2922 Plug Gp-Engine -Cylinder Block, Lh
| 28***22 | Plug Group-Engine; -Cylinder Block, Lh | 1 |
| 5I***05 | Plug | 6 |
287-2983 Plug Gp-Engine -Cylinder Block, Rh
| 19***11 | Plug | 1 |
| 28***83 | Plug Group-Engine; -Cylinder Block, Rh | 1 |
301-3396 Pulley Gp-Crankshaft
| 30***96 | Pulley Group-Crankshaft | 1 |
| 30***97 | Pulley-Crankshaft; (2-Groove) | 1 |
287-6114 Pulley Gp-Water Pump
| 23***07 | Pulley | 1 |
| 28***14 | Pulley Group-Water Pump | 1 |
| 8T***42 | Bolt; (M8x1.25x14-mm) | 4 |
326-4120 V-Belt Gp
| 31***99 | V-Belt | 1 |
| 32***20 | V-Belt Group | 1 |
235-5880 Valve Mechanism Gp
| 09***05 | Cap | 1 |
| 19***24 | Ring-Snap | 2 |
| 22***45 | Rocker As | 8 |
Braking System
227-1092 Brake Gp-Parking -Mechanical Caliper
| 16***62 | Insulation | 1 |
| 22***92 | Brake Group-Parking; -Mechanical Caliper | 1 |
| 27***87 | Lever As; (Parking Brake) | 1 |
292-5403 Brake Gp-Service
| 10***33 | Film-Identification; (Hydraulic Oil) | 1 |
| 10***49 | Plate | 2 |
| 14***25 | Connector As. | 1 |
257-6371 Control Gp-Foot Brake -Pedal
| 10***03 | Plate-Cover | 1 |
| 10***49 | Plate | 2 |
| 10***41 | Hose Assembly | 1 |
269-8472 Control Gp-Parking Brake
| 09***02 | Ring | 1 |
| 14***10 | Seal-Buffer | 1 |
| 14***77 | Seal-U-Cup | 1 |
257-3936 Lines Gp-Service Brake -Standard Axle
| 11***74 | Seal | 1 |
| 14***31 | Hose As | 1 |
| 14***18 | Connector As | 1 |
257-3974 Lines Gp-Service Brake -High Speed Axle
| 11***74 | Seal | 1 |
| 14***31 | Hose As | 1 |
| 14***18 | Connector As | 1 |
Cooling System
235-5896 Cooler Gp-Engine Oil
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 23***98 | Stud | 1 |
292-4040 Drain Gp-Coolant
| 23***78 | Valve As-Drain | 1 |
| 29***40 | Drain Group-Coolant | 1 |
242-5899 Fan Gp-Suction
| 14***91 | Spider As; (9-Blade) | 1 |
| 22***96 | Adapter | 1 |
| 24***99 | Fan Group-Suction | 1 |
255-6012 Lines Gp-Coolant
| 08***38 | Sleeve; (11x20x9mm Thk) | 1 |
| 14***35 | Clip | 3 |
| 17***14 | Valve As; (Coolant Drain) | 1 |
331-1439 Lines Gp-Water
| 09***75 | Bolt; (25-mm Long) | 2 |
| 23***59 | Gasket; (Water Temperature Regulator) | 1 |
| 23***60 | Regulator As-Water Temperature; (Thermostat) | 1 |
287-6056 Pump Gp-Water
| 28***66 | Bolt; (M8x1.25x65-mm) | 1 |
| 28***56 | Pump Group-Water | 1 |
| 33***17 | Pump Group-Water | 1 |
335-9117 Pump Gp-Water
| 10***47 | Cover-Pump | 1 |
| 19***60 | Plug | 1 |
| 33***17 | Pump Group-Water | 1 |
242-5898 Radiator & Mounting Gp
| 14***50 | Seal; (1.2-cm Each) | 0 |
| 24***98 | Radiator & Mounting Group | 1 |
| 26***44 | Radiator Group | 1 |
255-5989 Recovery Gp-Coolant
| 13***87 | Clip | 1 |
| 17***07 | Clip | 1 |
| 24***85 | Tank Group-Expansion; (Coolant) | 1 |
152-1811 Valve Gp-Relief -Pressure Override
| 12***63 | Kit-Seal; (Contains Parts Marked J) | 1 |
| 15***11 | Valve Group-Relief; -Pressure Override-Hydrostatic Pump | 1 |
| 6E***07 | Locknut-Sealing | 1 |
Electrical And Starting System
326-4122 Alternator Gp-Charging
| 10***14 | Alternator Group-Charging | 1 |
| 13***77 | Strap As | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
105-2814 Alternator Gp-Charging
| 10***14 | Alternator Group-Charging | 1 |
| 11***58 | Pulley-Alternator | 1 |
| 11***59 | Frame As-Alternator | 1 |
260-5338 Battery & Wiring Gp
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 1 |
277-7746 Control & Mtg Gp-Machine
| 18***76 | Strap As-Ground | 1 |
| 27***46 | Control & Mtg Group-Machine | 1 |
| 27***47 | Electronics Group-Machine | 1 |
277-7747 Electronics Gp-Machine
| 27***47 | Electronics Group-Machine | 1 |
| 30***91 | Control Group-Unprogrammed; (Transmission) | 1 |
| 34***70 | Software Group-Machine | 1 |
293-9791 Fuse Gp -Spare
| 11***90 | Fuse; (10 Amp) | 1 |
| 11***91 | Fuse; (15-Ampere) | 1 |
| 11***92 | Fuse; (20 Amp) | 1 |
235-5904 Glow Plug Gp
| 10***59 | Glow Plug | 4 |
| 23***04 | Glow Plug Group | 1 |
| 25***90 | Plate-Connection | 1 |
218-0942 Heater Gp-Jacket Water
| 13***17 | Cap As-Dust | 1 |
| 21***42 | Heater Group-Jacket Water | 1 |
| 22***41 | Element As-Jacket Water Heater; (120-Volt, 530-Watt) | 1 |
315-6084 Installation Gp-Security
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 19***89 | Film-Identification; (Ignition Switch) | 1 |
107-6032 Lamp Gp-Dome
| 10***32 | Lamp Group-Dome | 1 |
| 25***86 | Lamp; (24-Volt, 10-Watt) | 1 |
214-2968 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
195-0192 Lamp Gp-Head & Signal -Lh
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
195-0190 Lamp Gp-Head & Signal -Lh
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
195-0191 Lamp Gp-Head & Signal -Rh
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
195-0189 Lamp Gp-Head & Signal -Rh
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
309-1325 Lamp Gp-Warning Beacon -Amber
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 30***25 | Lamp Group-Warning Beacon; -12-Volt, Amber | 1 |
| 9R***42 | Plug As | 1 |
260-5500 Lighting Gp-Flood -Front, Rear
| 06***31 | Grommet | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 2 |
313-1723 Lighting Gp-Roading
| 10***05 | Lamp; (12-Volt, 5-Watt)(Registration Plate) | 1 |
| 19***91 | Lamp Group-Head & Signal; -Rh-High, Low Beam | 1 |
| 19***92 | Lamp Group-Head & Signal; -Lh-High, Low Beam | 1 |
313-1722 Lighting Gp-Roading
| 10***05 | Lamp; (12-Volt, 5-Watt)(Registration Plate) | 1 |
| 19***89 | Lamp Group-Head & Signal; -Rh-High, Low Beam | 1 |
| 19***90 | Lamp Group-Head & Signal; -Lh-High, Low Beam | 1 |
260-5501 Lighting Gp-Warning Beacon
| 26***01 | Lighting Group-Warning Beacon | 1 |
| 30***25 | Lamp Group-Warning Beacon; -12-Volt, Amber | 1 |
260-5349 Panel Gp-Switch -Console, Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***56 | Plug; (Switch) | 10 |
| 11***90 | Fuse; (10 Amp) | 17 |
304-7708 Panel Gp-Switch -Console, Rh
| 27***74 | Cap-Connector | 4 |
| 27***75 | Cap-Connector | 3 |
| 27***76 | Cap-Seal | 3 |
273-0177 Panel Gp-Switch -Machine Security, Console
| 10***56 | Plug; (Switch) | 10 |
| 11***90 | Fuse; (10 Amp) | 17 |
| 11***91 | Fuse; (15-Ampere) | 1 |
322-3158 Protection Gp-Wiring -Connector Caps
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***13 | Switch As; (Starting Motor)(12-Volt) | 1 |
322-3159 Protection Gp-Wiring -Connector Caps
| 14***39 | Starting Motor Group-Electric; -12-Volt | 1 |
| 32***59 | Protection Group-Wiring; -Connector Caps | 1 |
143-0539 Starting Motor Gp-Electric -12-Volt
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***31 | Clamp | 1 |
| 14***39 | Starting Motor Group-Electric; -12-Volt | 1 |
287-6181 Starting Motor Gp-Electric
| 28***81 | Starting Motor Group-Electric | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
7n-0718 Switch Gp-Disconnect -Battery
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 14***78 | Relay As; (12-Volt)(Differential Lock Sol Valve) | 1 |
274-8254 Switch Gp-A/C & Heater
| 27***54 | Switch Group-A/C & Heater | 1 |
| 31***01 | Sensor-Temperature; (Coolant) | 1 |
| 32***52 | Switch-Oil Press; (Engine) | 1 |
314-9918 Switch Gp-Press & Temp -Engine Coolant, Engine Oil
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 31***18 | Switch Group-Press & Temp; -Engine Coolant, Engine Oil | 1 |
| 31***46 | Switch As-Rocker; (Quick Coupler Pin Lock) | 1 |
260-5521 Switch Gp-Ride Control
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 26***21 | Switch Group-Ride Control | 1 |
| 26***52 | Switch As-Rocker; (High Speed Select) | 1 |
344-0333 Switch Gp-Rocker -Quick Coupler Pin Lock
| 08***30 | Cable As-Chassis | 1 |
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 57 |
| 10***95 | Terminal-Blade; (14-Ga To 18-Ga) | 52 |
260-5507 Switch Gp-Rocker -Quick Coupler Pin Lock
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 11***91 | Fuse; (15-Ampere) | 1 |
260-5510 Switch Gp-Rocker -High Speed Select
| 16***39 | Alarm As | 1 |
| 20***45 | Strap-Cable | 1 |
| 26***10 | Switch Group-Rocker; -High Speed Select | 1 |
266-7112 Switch Gp-Wiper
| 00***84 | Terminal-Blade; (16-Ga To 20-Ga) | 1 |
| 08***30 | Cable As-Chassis | 1 |
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 55 |
313-1726 Warning Gp-Backup
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 10***32 | Lamp Group-Dome | 1 |
| 20***45 | Strap-Cable | 9 |
260-2594 Wiring Gp-Cab
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 18 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***91 | Fuse; (15-Ampere) | 1 |
260-5526 Wiring Gp-Cab -Work Tool, Boosted Auxiliary Hydraulic Flow Switches
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 2 |
260-5524 Wiring Gp-Cab -Work Tool, Boosted Auxiliary Hydraulic Flow Switches
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 18 |
| 11***99 | Gasket; (Air Conditioner Control) | 0 |
| 11***91 | Fuse; (15-Ampere) | 1 |
260-5334 Wiring Gp-Cab -Roof
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 18 |
| 11***99 | Gasket; (Air Conditioner Control) | 0 |
| 11***91 | Fuse; (15-Ampere) | 1 |
291-4622 Wiring Gp-Cab -Roof
| 10***74 | Seal-Connector | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
314-6658 Wiring Gp-Chassis
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
259-8001 Wiring Gp-Chassis
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
313-1724 Wiring Gp-Engine
| 26***90 | Wiring Group-Work Tool; -Boosted Auxiliary Hydraulic Flow | 1 |
| 26***24 | Wiring Group-Cab; -Work Tool, Boosted Auxiliary Hydraulic Flow Switches | 1 |
| 31***24 | Wiring Group-Engine | 1 |
276-6814 Wiring Gp-Front -Boosted Auxiliary Hydraulic Flow
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 1 |
| 16***46 | Bolt; (M12x1.75x18-mm) | 16 |
| 16***48 | Bolt; (M12x1.75x55-mm) | 8 |
260-5331 Wiring Gp-Front
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
260-5390 Wiring Gp-Work Tool -Boosted Auxiliary Hydraulic Flow
| 15***28 | Pad-Brake; (2 Required) | 2 |
| 15***56 | Brake Group-Hydraulic Caliper; (Parking, Service) | 1 |
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 1 |
260-5389 Wiring Gp-Work Tool -Boosted Auxiliary Hydraulic Flow
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 2 |
| 16***46 | Bolt; (M12x1.75x18-mm) | 16 |
| 16***02 | Seal-O-Ring | 2 |
Engine Arrangement
305-2571 Engine Ar-Primary
| 23***80 | Cover Group-Valve Mechanism | 1 |
| 23***00 | Cylinder Head Group | 1 |
| 23***80 | Valve Mechanism Group | 1 |
321-8232 Installation Ar-Engine
| 24***98 | Radiator & Mounting Group | 1 |
| 24***99 | Fan Group-Suction | 1 |
| 24***16 | Valve Group-Fluid Sampling; -Engine Oil | 1 |
Frame And Body
307-1559 Conversion Ar-Roading -German
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 14***50 | Seal; (1.2-cm Each) | 0 |
| 22***92 | Lock As | 1 |
307-1560 Conversion Ar-Roading -German
| 12***43 | Seal; (70-cm) | 0 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 10 |
| 29***77 | Plate As | 1 |
294-0345 Conversion Ar-Roading -Italian
| 10***96 | Pin-Keeper | 1 |
| 20***13 | Reflector; (Red) | 2 |
| 25***88 | Pin As | 1 |
294-0344 Conversion Ar-Roading -Italian
| 12***52 | Film-Identification; (35-Km/H) | 3 |
| 20***77 | Guard Group-Bucket; -Roading | 1 |
| 25***49 | Plate-Identification; (English, German, Spanish) | 1 |
257-7687 Counterweight Gp
| 12***43 | Seal; (70-cm) | 0 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 10 |
| 25***87 | Counterweight Group | 1 |
293-0549 Cover Gp-Access -Cab, Front
| 27***24 | Grommet | 4 |
| 29***49 | Cover Group-Access; -Cab, Front | 1 |
| 29***59 | Cover; (Corner, Lh) | 1 |
297-9677 Cover Gp-Enclosure -Hood, Grill
| 14***50 | Seal; (1.2-cm Each) | 0 |
| 20***08 | Lock As | 2 |
| 29***77 | Cover Group-Enclosure; -Hood, Grill | 1 |
297-9678 Cover Gp-Enclosure -Hood, Corner Caps
| 29***77 | Cover Group-Enclosure; -Hood, Grill | 1 |
| 29***78 | Cover Group-Enclosure; -Hood, Corner Caps | 2 |
| 29***58 | Hood Group-Engine | 1 |
301-8252 Door Gp-Access -Hood
| 26***89 | Plate | 2 |
| 26***91 | Fender-Front | 2 |
| 28***17 | Bracket As | 2 |
299-6064 Enclosure Ar-Hood
| 27***89 | Fender As; (Rear) | 2 |
| 28***21 | Plate As | 2 |
| 29***64 | Enclosure Ar-Hood | 1 |
308-0581 Enclosure Ar-Hood -Sound Suppression Panel
| 29***43 | Frame As | 1 |
| 29***77 | Plate | 1 |
| 30***81 | Enclosure Ar-Hood; -Sound Suppression Panel | 1 |
262-1692 Fender Gp-Front
| 24***54 | Nut-Special; (M10x1.15-Thd) | 20 |
| 26***92 | Fender Group-Front | 1 |
| 26***59 | Frame As | 1 |
257-7743 Fender Gp-Rear
| 25***43 | Fender Group-Rear | 1 |
| 29***08 | Plate As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
236-6833 Frame Gp-Loader
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
| 16***11 | Clamp | 8 |
| 23***33 | Frame Group-Loader | 1 |
237-5570 Frame Gp-Rear
| 16***43 | Sleeve-Abrasion; (37.01-In Each) | 0 |
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
| 16***47 | Sleeve-Abrasion; (19.69-Inch) | 0 |
290-7007 Guard Gp-Bottom
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
| 16***11 | Clamp | 12 |
| 29***07 | Guard Group-Bottom | 1 |
321-0559 Guard Gp-Lines
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 15***40 | Nut-Weld; (M8x1.25-Thd) | 1 |
| 29***76 | Hinge As | 2 |
320-8423 Guard Gp-Lines
| 13***72 | Shim; (3.56-mm Thk) | 1 |
| 23***52 | Bearing-Self-Aligning | 2 |
| 25***58 | Plate | 1 |
320-8425 Guard Gp-Lines
| 30***47 | Hood Group-Engine | 1 |
| 30***30 | Spring As-Gas | 1 |
| 30***31 | Spring As-Gas | 1 |
291-9910 Hitch Gp-Articulating
| 29***10 | Hitch Group-Articulating | 1 |
| 3B***52 | Elbow; --Cross To Hose Assembly To Air Gauge | 2 |
| 3B***85 | Fitting-Hydraulic; Fitting 45 Degrees Angle--Used As Required | 1 |
301-8247 Hood Gp-Engine
| 20***45 | Strap-Cable | 5 |
| 27***43 | Tie-Push Mount | 2 |
| 30***92 | Mounting Group-Registration; -With Wiring & Lights | 1 |
299-2158 Hood Gp-Engine
| 28***52 | Link As | 1 |
| 28***56 | Pin | 2 |
| 29***58 | Hood Group-Engine | 1 |
302-1345 Lines Gp-Grease -Loader Frame, Lift, Tilt Cylinders
| 15***72 | Kit-Receptacle; (2-Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 19***62 | Lamp Group-Registration Plate | 1 |
237-5537 Link Gp-Steering Frame Lock
| 23***37 | Link Group-Steering Frame Lock | 1 |
| 30***78 | Insulation | 1 |
| 30***80 | Insulation | 1 |
301-3392 Mounting Gp-Registration -With Wiring & Lights
| 22***52 | Kit-Brake Repair; (Parking) | 1 |
| 22***53 | Kit-Lever; (Parking Brake) | 1 |
| 22***54 | Kit-Seal; (Parking Brake) | 1 |
260-5492 Mounting Gp-Registration
| 26***92 | Mounting Group-Registration | 1 |
| 26***69 | Plate As | 1 |
| 26***70 | Plate As | 1 |
306-5277 Panel Gp-Sound Suppression -Hood
| 15***40 | Seal-Lip Type | 1 |
| 16***68 | Piston-Brake | 1 |
| 16***13 | Seal-Brake | 1 |
258-8553 Plate Gp-Firewall
| 09***81 | Pin-Spring | 1 |
| 23***88 | Pin-Spring | 2 |
| 25***32 | Bearing As | 2 |
Fuel System
292-0914 Control Gp-Governor -Hand Throttle
| 15***02 | Spacer; (11x20x15-mm Thk) | 1 |
| 22***51 | Washer-Hard; (11x32x5-mm Thk) | 1 |
| 29***13 | Plate As | 1 |
316-4798 Control Gp-Governor -Cable
| 31***94 | Cable As-Governor Control | 1 |
| 31***98 | Control Group-Governor; -Cable | 1 |
| 4K***64 | Clip-- Lock Line To Hitch; (14.2mm Id)(Circular) | 1 |
285-2995 Filter Gp-Water Sep & Fuel
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***49 | Plug | 2 |
| 06***80 | Fitting | 1 |
320-6534 Lines Gp-Fuel
| 12***27 | Grommet | 1 |
| 15***02 | Spacer; (11x20x15-mm Thk) | 1 |
| 16***42 | Sleeve-Abrasion; (23.6in) | 0 |
331-7261 Lines Gp-Fuel Injection
| 09***35 | Cap | 1 |
| 11***63 | Support | 4 |
| 11***64 | Hose | 4 |
331-7315 Pump Gp-Fuel Injection
| 14***17 | Bolt; (M10x1.25x25-mm) | 1 |
| 19***33 | Bolt | 2 |
| 21***10 | Nut | 1 |
232-5877 Pump Gp-Fuel Prm & Prim Filter -Water Separator
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 12***14 | Kit-Seal; (Water Separator) | 1 |
255-6068 Tank Gp-Fuel
| 14***67 | Clamp; (Hose) | 2 |
| 20***30 | Cap Group-Fuel Filler; (Vented, Lockable) | 1 |
| 25***64 | Strap As | 1 |
Hydraulic System
162-3960 Accumulator Gp-Ride Control -Charged
| 16***60 | Accumulator Group-Ride Control; -Charged | 1 |
| 27***30 | Core As-Hydraulic Oil Cooler | 1 |
| 27***31 | Core As-Condenser; (Refrigerant) | 1 |
162-3961 Accumulator Gp-Ride Control -Uncharged
| 16***61 | Accumulator Group-Ride Control; -Uncharged | 1 |
| 17***77 | Spring | 1 |
| 27***14 | Washer; (19.5x35x3-mm Thk) | 1 |
300-7511 Actuator Gp-Pump
| 28***48 | Boss | 1 |
| 28***49 | Boss | 1 |
| 30***78 | Core As-Hydraulic Oil Cooler | 1 |
260-3054 Cooler & Condenser Gp -Hydraulic Oil, Refrigerant
| 17***93 | Rod | 2 |
| 18***72 | Kit-Seal; (Coupler Cylinder) | 1 |
| 26***54 | Cooler & Condenser Group; -Hydraulic Oil, Refrigerant | 1 |
255-5988 Cooler & Mtg Gp-Hydraulic Oil
| 14***09 | Ring-Wear | 1 |
| 14***18 | Ring-Wear | 1 |
| 16***83 | Seal As-Buffer | 1 |
274-5160 Core Gp-Hydraulic Oil Cooler
| 16***86 | Seal As-Buffer | 1 |
| 16***94 | Seal-U-Cup | 1 |
| 1H***39 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 1 |
178-3713 Cylinder Gp-Coupler
| 09***76 | Ring | 1 |
| 14***49 | Ring-Wear | 1 |
| 14***87 | Seal-Piston | 1 |
257-3975 Cylinder Gp-Lift
| 08***72 | Plug-O-Ring | 3 |
| 11***79 | Bushing; (External) | 1 |
| 11***80 | Bushing; (Internal) | 1 |
185-1839 Cylinder Gp-Multipurpose Bukt
| 18***39 | Cylinder Group-Multipurpose Bukt | 1 |
| 25***22 | Mounting Group-Pump | 1 |
| 25***25 | Lines Group-Hydraulic Filter | 1 |
257-3977 Cylinder Gp-Tilt
| 25***37 | Valve Group-Main Control; -Mechanical, 3-Function | 1 |
| 25***77 | Cylinder Group-Tilt | 1 |
| 27***40 | Control Group-Hydraulic Hand; -Mechanical | 1 |
300-5463 Head Gp-Pump -Hydrostatic
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 25***42 | Valve Group-Main Control; -Electrohydraulic, 3-Function | 1 |
| 25***44 | Lines Group-Pilot; -Differential Lock, Hydraulic Lockout | 1 |
242-5870 Hydraulic Ar
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 24***70 | Hydraulic Ar | 1 |
| 25***42 | Valve Group-Main Control; -Electrohydraulic, 3-Function | 1 |
257-4018 Hydraulic Ar -Electrohydraulic With Auxiliary Control
| 25***56 | Lines Group-Cylinder; -Ride Control Accumulator | 1 |
| 25***18 | Hydraulic Ar; -Electrohydraulic With Auxiliary Control | 1 |
| 26***21 | Switch Group-Ride Control | 1 |
257-4021 Hydraulic Ar -Ride Control
| 09***65 | Grommet | 1 |
| 10***03 | Plate-Cover | 2 |
| 10***89 | Bolt; (M8x1.25x130-mm) | 2 |
257-4017 Hydraulic Ar -Mechanical Control
| 25***72 | Lines Group-Cylinder; -Ride Control Accumulator | 1 |
| 25***17 | Hydraulic Ar; -Mechanical Control | 1 |
| 26***21 | Switch Group-Ride Control | 1 |
257-4020 Hydraulic Ar -Ride Control, Boosted Auxiliary Hydraulic Flow
| 11***83 | Connector | 1 |
| 13***60 | Spacer; (11x19x10-mm Thk) | 4 |
| 13***20 | Hose As | 2 |
257-4019 Hydraulic Ar -Electrohydraulic With Auxiliary, Return To Dig Control
| 25***19 | Hydraulic Ar; -Electrohydraulic With Auxiliary, Return To Dig Control | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 4 |
312-8451 Kit-Guard -Light
| 11***21 | Lug; (M10x1.5-Thd) | 2 |
| 13***60 | Spacer; (11x19x10-mm Thk) | 4 |
| 14***44 | Plate-Retainer | 1 |
257-3939 Lines Gp-Auxiliary Hydraulic -Horizontal Pin Lock Coupler
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 15***60 | Tee As | 2 |
| 15***17 | Cap-Dust | 1 |
340-7023 Lines Gp-Auxiliary Hydraulic -Horizontal Pin Lock Coupler
| 13***11 | Elbow | 1 |
| 14***25 | Connector As. | 3 |
| 14***28 | Connector Assem. | 1 |
257-3952 Lines Gp-Auxiliary Hydraulic -Vertical Pin Lock Coupler, Boosted Auxiliary Hydraulic Flow
| 13***11 | Elbow | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
281-7281 Lines Gp-Auxiliary Hydraulic -Vertical Pin Lock Coupler
| 08***29 | Spacer; (9x19x30-mm Thk) | 2 |
| 10***54 | Connector-Orfs | 1 |
| 10***33 | Clip; (Slot) | 2 |
284-2843 Lines Gp-Bucket -Multipurpose
| 13***55 | Hose; (8-cm) | 0 |
| 14***41 | Connector Group | 1 |
| 15***32 | Elbow As | 1 |
263-8706 Lines Gp-Bucket -Multipurpose
| 08***29 | Spacer; (9x19x30-mm Thk) | 2 |
| 10***54 | Connector-Orfs | 1 |
| 10***33 | Clip; (Slot) | 2 |
257-3957 Lines Gp-Cylinder -Load Control
| 14***25 | Connector As. | 3 |
| 14***68 | Elbow Group | 3 |
| 1P***78 | Clamp; (Hose) | 2 |
257-3955 Lines Gp-Cylinder -Lift, Tilt
| 13***55 | Hose; (8-cm) | 0 |
| 14***41 | Connector Group | 1 |
| 15***32 | Elbow As | 1 |
257-3956 Lines Gp-Cylinder -Ride Control Accumulator
| 03***32 | Strap--Harness Assembly To Compressor | 1 |
| 14***25 | Connector | 1 |
| 14***25 | Connector As. | 8 |
257-3972 Lines Gp-Cylinder -Ride Control Accumulator
| 14***47 | Elbow; (-12 Orb/Orfs) | 2 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 18***86 | Tee As | 1 |
257-3946 Lines Gp-Hydraulic Oil Cooler
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 15***59 | Tee Group | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
282-9570 Lines Gp-Hydraulic Oil Cooler
| 18***54 | Valve Group-Solenoid; -Auxiliary | 2 |
| 28***70 | Lines Group-Hydraulic Oil Cooler | 1 |
257-3944 Lines Gp-Pilot -Differential Lock, Hydraulic Lockout
| 10***08 | Kit-Seal; (Solenoid Valve, Quick Steer) | 1 |
| 13***11 | Valve-Check | 1 |
| 14***88 | Kit-Seal; (Ride Control, Switch) | 1 |
272-2236 Lines Gp-Pilot -Auxiliary Control Valve
| 24***81 | Flange | 2 |
| 24***12 | Kit-Seal; (Solenoid Valve) | 1 |
| 27***36 | Lines Group-Pilot; -Auxiliary Control Valve | 1 |
257-3923 Lines Gp-Pump
| 14***88 | Kit-Seal; (Ride Control, Switch) | 1 |
| 22***09 | Kit-Seal; (Accumulator) | 1 |
| 23***28 | Coil As | 1 |
297-0164 Lines Gp-Pump
| 13***55 | Hose; (8-cm) | 0 |
| 14***53 | Hose; (272.2-cm) | 0 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
262-8718 Manifold Gp-Control -Differential Lock, Hydraulic Lockout
| 16***08 | Mount As | 3 |
| 26***18 | Manifold Group-Control; -Differential Lock, Hydraulic Lockout | 1 |
| 27***86 | Plate As | 1 |
244-6735 Manifold Gp-Control -2-Way, Proportional
| 21***77 | Seal-O-Ring | 1 |
| 22***40 | Valve Group-Relief; (Gear Motor) | 1 |
| 24***35 | Manifold Group-Control; -2-Way, Proportional-Auxiliary | 1 |
248-7696 Manifold Gp-Control -Boosted Auxiliary Hydraulic Flow
| 03***39 | Seal-O-Ring (Id=9.25mm) | 1 |
| 09***74 | Bolt-Socket Head; (M12x1.75x65-mm) | 8 |
| 09***42 | Ring-Retaining | 1 |
245-8780 Manifold Gp-Ride Control
| 17***77 | Spring | 1 |
| 24***80 | Manifold Group-Ride Control | 1 |
| 26***54 | Cooler & Condenser Group; -Hydraulic Oil, Refrigerant | 1 |
257-3926 Motor & Lines Gp-Hydraulic Fan
| 25***26 | Motor & Lines Group-Hydraulic Fan | 1 |
| 3B***17 | Cotter; (Pin) | 4 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 4 |
257-4009 Motor Gp-Gear -Hydraulic Fan
| 11***60 | Strap | 2 |
| 25***09 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 27***43 | Tie-Push Mount | 3 |
257-3932 Motor Gp-Piston -Hydrostatic
| 10***20 | Seal-O-Ring | 1 |
| 11***30 | Screw; (1-5/16-Thd) | 1 |
| 11***35 | Screw-Adjustment | 1 |
9r-4668 Mounting Gp-Cylinder -Multipurpose Bucket
| 16***77 | Valve As | 1 |
| 16***79 | Kit-Seal | 1 |
| 27***35 | Coil As | 1 |
265-3923 Mounting Gp-Control Valve
| 10***65 | Circlip | 1 |
| 11***57 | Pin | 1 |
| 11***38 | Piston | 9 |
280-0527 Mounting Gp-Cooler & Condenser -Hydraulic Oil, Refrigerant
| 14***37 | Cap As-Filler; (Hydraulic Tank) | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 1 |
| 20***18 | Strainer; (Hydraulic Oil) | 1 |
260-5386 Positioner Gp-Work Tool -Return To Dig
| 22***41 | Seal-O-Ring | 1 |
| 26***86 | Positioner Group-Work Tool; -Return To Dig | 1 |
| 30***18 | Valve Group-Relief; (Main) | 1 |
257-3931 Pump Gp-Piston -Hydrostatic
| 10***39 | Plug As-Drain; (Hydraulic Tank) | 2 |
| 15***27 | Tube As-Drain | 1 |
| 16***92 | Clip | 2 |
277-6551 Rotating Gp-Pump -Hydrostatic
| 27***51 | Rotating Group-Pump; -Hydrostatic | 1 |
| 28***16 | Plug As | 2 |
257-7684 Tank Gp-Hydraulic
| 22***41 | Seal-O-Ring | 1 |
| 25***84 | Tank Group-Hydraulic | 1 |
| 30***18 | Valve Group-Relief; (Main) | 1 |
332-6408 Valve & Mtg Gp-Solenoid -Quick Coupler
| 22***41 | Seal-O-Ring | 1 |
| 30***18 | Valve Group-Relief; (Main) | 1 |
| 30***19 | Valve Group-Relief; (Line, Tilt) | 1 |
334-4581 Valve Gp-Control -Mechanical, 3-Function
| 12***69 | Plug | 2 |
| 21***75 | Seal-O-Ring | 1 |
| 26***69 | Solenoid As; (Pilot Valve) | 1 |
308-0190 Valve Gp-Drain -Standard
| 24***93 | Pin | 2 |
| 24***94 | Pin | 1 |
| 24***95 | Pin | 2 |
308-0189 Valve Gp-Drain -Ecology
| 11***73 | Seal-O-Ring | 2 |
| 12***62 | Seal-O-Ring | 1 |
| 14***10 | Cover | 1 |
257-3942 Valve Gp-Main Control -Electrohydraulic, 3-Function
| 11***90 | Fuse; (10 Amp) | 1 |
| 11***93 | Fuse; (25-Ampere) | 1 |
| 14***78 | Relay As; (12-Volt)(Differential Lock Sol Valve) | 1 |
257-3937 Valve Gp-Main Control -Mechanical, 3-Function
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 25***37 | Valve Group-Main Control; -Mechanical, 3-Function | 1 |
| 25***34 | Air Conditioner Group | 1 |
289-6383 Valve Gp-Pilot -Hydrostatic Drive Motor
| 11***31 | Switch-Temperature; (Air Conditioner) | 1 |
| 22***74 | Fitting-Drain | 2 |
| 22***83 | Valve-Drain | 2 |
300-7541 Valve Gp-Pump Control -Hydrostatic
| 20***08 | Lock As | 1 |
| 27***70 | Door Group-Access | 1 |
| 27***71 | Door | 1 |
Implements
242-5649 Control Gp-Work Tool
| 15***72 | Knob | 1 |
| 24***49 | Control Group-Work Tool | 1 |
| 27***51 | Box Group-Storage | 1 |
Lubrication System
331-6959 Breather Gp -Crankcase
| 23***37 | Clip-Hose | 1 |
| 23***38 | Clip | 3 |
| 23***42 | Plate | 1 |
314-9901 Filter Gp-Engine Oil
| 09***37 | Seal-O-Ring | 1 |
| 09***71 | Seal-O-Ring (Id=94.40mm) | 1 |
| 1R***34 | Filter-Engine Oil | 1 |
287-5377 Lines Gp-Engine Oil
| 23***94 | Strainer As-Oil; (Engine) | 1 |
| 23***13 | Seal-O-Ring | 1 |
| 28***77 | Lines Group-Engine Oil | 1 |
235-5895 Pump Gp-Engine Oil
| 10***44 | Nut | 1 |
| 10***83 | Seal-O-Ring | 1 |
| 11***41 | Pump As-Oil | 1 |
287-5665 Valve Gp-Engine Oil Relief
| 10***25 | Valve As; (Oil Bypass)(Engine) | 1 |
| 23***96 | Gasket | 1 |
| 23***96 | Gasket | 1 |
242-8716 Valve Gp-Fluid Sampling -Engine Oil
| 24***16 | Valve Group-Fluid Sampling; -Engine Oil | 1 |
| 24***17 | Tee | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
185-4254 Valve Gp-Solenoid
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 18***54 | Valve Group-Solenoid; -Auxiliary | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
Machine Arrangement
322-4874 Chassis Ar
| 23***33 | Frame Group-Loader | 1 |
| 23***37 | Link Group-Steering Frame Lock | 1 |
| 23***70 | Frame Group-Rear | 1 |
321-8196 Common Ar
| 24***70 | Hydraulic Ar | 1 |
| 30***71 | Engine Ar-Primary | 1 |
| 32***96 | Common Ar | 1 |
307-1561 Conversion Ar-Certification
| 20***77 | Guard Group-Bucket; -Roading | 1 |
| 30***61 | Cover, Conversion Ar-Certification | 1 |
Operator Station
322-5769 Air Conditioner Ar
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 19***09 | Plug | 2 |
269-3820 Air Conditioner Gp
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 19***09 | Plug | 2 |
259-1634 Air Conditioner Gp
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 19***09 | Plug | 2 |
280-9542 Box Gp-Storage
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 19***09 | Plug | 2 |
272-2251 Box Gp-Storage
| 25***40 | Cab As | 1 |
| 25***43 | Glass | 1 |
| 25***93 | Glass | 1 |
295-5846 Cab Ar-Enclosed Rops -Deluxe
| 27***53 | Console As | 1 |
| 28***65 | Plate As | 1 |
| 28***94 | Plate As | 1 |
277-2527 Cab Ar-Enclosed Rops -Standard
| 26***25 | Canopy As-Open Rops | 1 |
| 26***12 | Panel As-Rear | 1 |
| 27***27 | Cab Ar-Enclosed Rops; -Standard | 1 |
295-5845 Cab Ar-Enclosed Rops -Comfort
| 23***23 | Switch As-Pressure; (Refrigerant Compr, High Side) | 1 |
| 29***45 | Cab Ar-Enclosed Rops; -Comfort | 1 |
| 30***10 | V-Belt; (Mounting) | 1 |
295-7921 Cab Gp-Enclosed Rops
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***09 | Pin | 1 |
| 15***98 | Screw-Button Head; (M3x0.5x1-mm) | 2 |
277-2528 Canopy Ar-Open Rops
| 25***70 | Pedal Group-Governor | 1 |
| 27***28 | Canopy Ar-Open Rops | 1 |
| 29***08 | Plate | 1 |
295-7928 Canopy Gp-Open Rops
| 26***09 | Control Group-Creeper | 1 |
| 28***48 | Control Group-Rimpull | 1 |
| 29***14 | Control Group-Governor; -Hand Throttle | 1 |
272-2444 Compressor & Mtg Gp-Refrig
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***31 | Clamp | 1 |
| 15***49 | Knob-Control | 1 |
283-0528 Console Gp-Operator
| 16***95 | Knob | 1 |
| 26***60 | Control Group-Handle; (Mechanical) | 1 |
| 27***14 | Washer; (19.5x35x3-mm Thk) | 2 |
280-9177 Console Gp-Operator
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***49 | Knob-Control | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
295-5535 Control & Mtg Gp-Pedal -Governor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 17***70 | Coil As | 1 |
295-1706 Control Ar-Transmission
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 26***21 | Kit-Detent | 2 |
| 26***39 | Valve Group-Pilot; (Joystick, 3-Function) | 1 |
274-8255 Control Gp-A/C & Heater
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***49 | Knob-Control | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
260-5509 Control Gp-Creeper
| 26***09 | Control Group-Creeper | 1 |
| 34***57 | Steering Column As | 1 |
| 34***58 | Contact As | 1 |
270-2540 Control Gp-Hydraulic Hand -Mechanical
| 27***40 | Control Group-Hydraulic Hand; -Mechanical | 1 |
| 28***34 | Kit-Pivot; (Steering Column) | 1 |
| 29***07 | Kit-Lever | 1 |
262-8744 Control Gp-Joystick -3-Function, Auxiliary Control
| 26***44 | Control Group-Joystick; -3-Function, Auxiliary Control | 1 |
| 30***13 | Plate As | 1 |
| 30***14 | Plug, O-Ring, Plate As | 1 |
262-8745 Control Gp-Joystick -3-Function, Auxiliary, Return To Dig Control
| 22***43 | Seal; (8.5-cm Each) | 0 |
| 26***45 | Control Group-Joystick; -3-Function, Auxiliary, Return To Dig Control | 1 |
| 33***42 | Plate As | 1 |
284-8648 Control Gp-Rimpull
| 11***03 | Bolt; (M6x1x55-mm) | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 19***99 | Bolt; (M4x0.7x25-mm) | 4 |
259-1643 Control Gp-Steering -Fixed Column
| 11***03 | Bolt; (M6x1x55-mm) | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 19***99 | Bolt; (M4x0.7x25-mm) | 4 |
259-1644 Control Gp-Steering -Adjustable Column
| 11***03 | Bolt; (M6x1x55-mm) | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 19***99 | Bolt; (M4x0.7x25-mm) | 4 |
301-6920 Cover Gp-Cab -Rear Skirt
| 11***03 | Bolt; (M6x1x55-mm) | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 19***99 | Bolt; (M4x0.7x25-mm) | 4 |
275-8188 Door Gp-Cab -Lh
| 25***88 | Cooler & Mtg Group-Hydraulic Oil | 1 |
| 25***46 | Lines Group-Hydraulic Oil Cooler | 1 |
| 25***33 | Heater & Mtg Group-Cab | 1 |
275-8189 Door Gp-Cab -Rh
| 27***90 | Motor As-Blower; (Air Conditioner, Heater) | 1 |
| 27***91 | Coil As-Heater | 1 |
| 27***93 | Resistor; (12-Volt) | 1 |
267-9382 Door Gp-Cab -Rh
| 11***93 | Fuse; (25-Ampere) | 1 |
| 26***82 | Door Group-Cab; -Rh | 1 |
| 26***19 | Heater Group-Cab | 1 |
256-9636 Door Gp-Cab -Lh
| 25***36 | Door Group-Cab; -Lh | 1 |
| 26***37 | Floor Mat; (Upper) | 1 |
| 26***38 | Floor Mat; (Front) | 1 |
257-6374 Duct & Filter Gp-Cab Air
| 18***44 | Cable-Lock | 1 |
| 25***74 | Duct & Filter Group-Cab Air | 1 |
| 26***81 | Radio | 1 |
280-2370 Floor Mat Gp
| 18***44 | Cable-Lock | 1 |
| 26***81 | Radio | 1 |
| 28***70 | Floor Mat Group | 1 |
259-1633 Heater & Mtg Gp-Cab
| 17***94 | Bumper | 2 |
| 25***33 | Heater & Mtg Group-Cab | 1 |
| 28***85 | Striker As | 2 |
322-5768 Heater Ar-Cab
| 26***68 | Cover-Speaker | 2 |
| 26***95 | Headliner As; (Cab) | 1 |
| 30***61 | Anchor; (Ratchet) | 8 |
269-3819 Heater Gp-Cab
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
| 12***27 | Grommet | 1 |
266-1418 Installation Gp-Radio -Eame
| 13***41 | Grommet | 2 |
| 13***98 | Spacer; (6.6x25x27-mm Thk) | 1 |
| 13***21 | Joint | 1 |
266-1420 Installation Gp-Radio -Nacd
| 13***41 | Grommet | 2 |
| 13***98 | Spacer; (6.6x25x27-mm Thk) | 1 |
| 13***21 | Joint | 1 |
284-3889 Latch Gp -Door
| 28***89 | Latch Group; -Door | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
257-6373 Liner Gp-Cab
| 25***73 | Liner Group-Cab | 1 |
| 3B***03 | Lockwasher | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 1 |
271-7193 Lines Gp-Air Conditioner
| 25***03 | Mirror Group-Rear View; -Interior | 1 |
| 27***93 | Lines Group-Air Conditioner | 1 |
| 27***55 | Plate | 1 |
320-6051 Lines Gp-Cab Heater
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***91 | Motor Group-Window Wiper; (Front) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
6v-1970 Literature Gp
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 26***23 | Cap-Wiper | 1 |
260-3558 Mirror Gp-Rear View -Exterior
| 25***75 | Wiper Group-Window | 1 |
| 25***43 | Control Group-Steering; -Fixed Column | 1 |
| 26***94 | Wiring Group-Cab | 1 |
260-3556 Mirror Gp-Rear View -Interior
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 14***59 | Fuse; (5-Ampere) | 1 |
| 15***39 | Cable As | 1 |
257-8403 Mirror Gp-Rear View -Interior
| 25***03 | Mirror Group-Rear View; -Interior | 1 |
| 34***01 | Washer; (20.5x108x10-mm Thk) | 4 |
| 3E***83 | Sleeve | 4 |
269-0416 Motor Gp-Window Wiper -Rear
| 25***75 | Wiper Group-Window | 1 |
| 25***44 | Control Group-Steering; -Adjustable Column | 1 |
| 26***94 | Wiring Group-Cab | 1 |
241-9102 Motor Gp-Window Wiper -Front
| 24***02 | Motor Group-Window Wiper; -Front | 1 |
| 25***75 | Wiper Group-Window | 1 |
| 25***44 | Control Group-Steering; -Adjustable Column | 1 |
256-9635 Mounting Gp-Cab
| 25***88 | Cooler & Mtg Group-Hydraulic Oil | 1 |
| 25***35 | Mounting Group-Cab | 1 |
| 25***46 | Lines Group-Hydraulic Oil Cooler | 1 |
260-5499 Mounting Gp-Radio
| 26***99 | Mounting Group-Radio | 1 |
| 29***43 | Glass; (Lh) | 1 |
| 29***44 | Panel As; (Rh) | 1 |
295-5276 Operator Ar-Enclosed Rops -Deluxe Cab
| 25***91 | Plate As | 1 |
| 28***53 | Gasket | 1 |
| 29***76 | Operator Ar-Enclosed Rops; -Deluxe Cab | 1 |
295-5275 Operator Ar-Enclosed Rops -Comfort Cab
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 1S***25 | Bearing-Sleeve | 5 |
295-5274 Operator Ar-Enclosed Rops -Standard Cab
| 10***56 | Plug; (Switch) | 4 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 15***75 | Kit-Receptacle; (6-Pin) | 1 |
322-5766 Operator Ar-Open Rops
| 12***99 | Rivet | 4 |
| 26***55 | Roller As | 1 |
| 26***73 | Spacer; (6.22x9.52x11-mm Thk) | 2 |
293-0547 Panel Gp-Cab -Front
| 25***37 | Seat Group-Suspension; -Cloth | 1 |
| 29***47 | Panel Group-Cab; -Front | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
260-5186 Panel Gp-Instrument -Gauge Cluster, Switches
| 23***91 | Seat Group-Suspension; -Deluxe, Cloth | 1 |
| 26***86 | Panel Group-Instrument; -Gauge Cluster, Switches | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
257-6370 Pedal Gp-Governor
| 11***91 | Fuse; (15-Ampere) | 1 |
| 14***59 | Fuse; (5-Ampere) | 1 |
| 25***70 | Pedal Group-Governor | 1 |
260-9830 Plate Gp-Seat
| 22***37 | Seat Belt Group; -Retractable | 1 |
| 26***30 | Plate Group-Seat | 1 |
| 8S***26 | Bolt; (7/16-20x3-In) | 1 |
279-0643 Screen Gp-Sun
| 1L***80 | Bolt; (7/16-20x1.5-In) | 2 |
| 26***85 | Spacer; (11.5x19x7-mm Thk) | 3 |
| 27***43 | Screen Group-Sun | 1 |
279-5725 Seat & Mounting Gp
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
| 15***86 | Kit-Cover; (Seat) | 1 |
279-5724 Seat & Mounting Gp
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
| 15***56 | Kit-Armrest; (Seat)(Rh) | 1 |
279-5723 Seat & Mounting Gp
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
| 15***56 | Kit-Armrest; (Seat)(Rh) | 1 |
236-8015 Seat Belt Gp
| 23***15 | Seat Belt Group | 1 |
| 29***55 | Insulation | 1 |
260-9831 Seat Belt Gp
| 14***95 | Hose; (650-cm Each) | 0 |
| 26***31 | Seat Belt Group | 1 |
| 28***58 | Bracket As | 1 |
233-7391 Seat Gp-Suspension -Deluxe, Cloth
| 14***95 | Hose; (650-cm Each) | 0 |
| 23***91 | Seat Group-Suspension; -Deluxe, Cloth | 1 |
| 29***36 | Reservoir | 1 |
259-1635 Seat Gp-Suspension -Air, Deluxe, Cloth
| 25***43 | Steering Wheel | 1 |
| 25***48 | Knob As; (Steering Wheel) | 1 |
| 25***35 | Seat Group-Suspension; -Air, Deluxe, Cloth | 1 |
259-1637 Seat Gp-Suspension -Cloth
| 25***43 | Steering Wheel | 1 |
| 25***48 | Knob As; (Steering Wheel) | 1 |
| 25***73 | Liner Group-Cab | 1 |
260-9827 Suppression Gp-Sound -Cab
| 16***62 | Insulation | 2 |
| 20***08 | Lock As | 1 |
| 24***34 | Knob | 1 |
279-5068 Tank Gp-Window Washer
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 16***62 | Insulation | 2 |
299-6051 Tank Gp-Window Washer
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 16***62 | Insulation | 2 |
269-0415 Trim Gp-Cab -Rh
| 13***34 | Arm As-Window Wiper | 1 |
| 13***94 | Nozzle As-Washer | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
260-3545 Trim Gp-Cab -Enclosed Rops
| 26***45 | Trim Group-Cab; -Enclosed Rops | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 2 |
| 6V***32 | Nut-Weld (M6x6 Thd); (M10x1.5) (Weld) | 2 |
260-3544 Trim Gp-Cab -Open Rops
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 4 |
| 16***62 | Insulation | 2 |
| 25***63 | Rivet-Blind | 1 |
282-8636 Trim Gp-Cab -Front
| 14***99 | Tooth Group-Uni | 7 |
| 26***41 | Bucket Group-General Purpose | 1 |
| 28***36 | Trim Group-Cab; -Front | 1 |
274-4287 Trim Gp-Cab -Front
| 15***62 | Film-Information; (Tie-Down Location) | 2 |
| 18***33 | Step Group-Material Handling Arm | 1 |
| 21***50 | Arm As | 1 |
270-1901 Visor Gp-Cab
| 14***03 | Edge Group-Cutting | 1 |
| 26***30 | Bucket Group-General Purpose | 1 |
| 27***01 | Visor Group-Cab | 1 |
257-6375 Wiper Gp-Window
| 14***99 | Tooth Group-Uni | 7 |
| 25***75 | Wiper Group-Window | 1 |
| 26***30 | Bucket Group-General Purpose | 1 |
Power Train
142-1273 Valve Gp-Tire
| 14***73 | Valve Group-Tire | 1 |
| 25***43 | Fender Group-Rear | 1 |
| 25***39 | Wheel & Tire Group | 1 |
262-8650 Axle & Transfer Drive Gp-Rear -High Speed, With Differential Lock
| 09***23 | Pin-Cotter | 1 |
| 16***46 | Pin | 1 |
| 20***12 | Bolt-Flange Head; (M12x1.75x40-mm) | 2 |
262-8641 Axle & Transfer Drive Gp-Rear -Standard, With Differential Lock
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 1 |
| 15***41 | Seal-Lip Type | 1 |
| 16***02 | Seal-O-Ring | 2 |
305-1933 Axle Gp-Front -High Speed, With Differential Lock
| 13***08 | Bearing As-Tapered Roller | 2 |
| 15***45 | Plug-Magnetic; (Transfer Drive) | 1 |
| 19***95 | Bolt; (M6x1x14-mm) | 2 |
262-8639 Axle Gp-Front -Standard, With Differential Lock
| 26***39 | Axle Group-Front; -Standard, With Differential Lock | 2 |
| 26***74 | Cable As-Parking Brake Control | 1 |
| 4K***64 | Clip-- Lock Line To Hitch; (14.2mm Id)(Circular) | 2 |
262-8647 Axle Gp-Front -High Speed, With Differential Lock
| 13***08 | Bearing As-Tapered Roller | 2 |
| 15***45 | Plug-Magnetic; (Transfer Drive) | 1 |
| 19***95 | Bolt; (M6x1x14-mm) | 2 |
306-5422 Axle Gp-Front -Standard Axle, With Differential Lock
| 13***08 | Bearing As-Tapered Roller | 2 |
| 15***45 | Plug-Magnetic; (Transfer Drive) | 1 |
| 19***95 | Bolt; (M6x1x14-mm) | 2 |
292-5408 Differential & Bevel Gear Gp -Rear, Locking, Standard Axle
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 2 |
| 09***29 | Ring; (Retaining) | 1 |
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 2 |
292-5410 Differential & Bevel Gear Gp -Rear, Locking, High Speed Axle
| 05***90 | Vent | 1 |
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 1 |
| 09***47 | Nut-Thin; (M16x2 Thd) | 1 |
292-5396 Differential & Bevel Gear Gp -Front, Locking
| 20***10 | Gear-Bevel; (12-Teeth) | 4 |
| 21***92 | Washer-Thrust; (22x42x2-mm Thk) | 4 |
| 21***93 | Shaft | 2 |
292-5397 Differential Gp
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 29***97 | Differential Group | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
292-5376 Drive Gp-Transfer -Hydrostatic, High Speed
| 12***79 | Clip | 1 |
| 14***25 | Connector As. | 1 |
| 14***68 | Elbow Group | 1 |
292-5375 Drive Gp-Transfer -Hydrostatic
| 15***39 | Seal-Lip Type | 1 |
| 17***08 | Cone-Tapered | 2 |
| 20***98 | Stud | 8 |
137-7747 Filter Gp-Oil -Hydraulic, Power Train
| 13***47 | Filter Group-Oil; -Hydraulic, Power Train | 1 |
| 14***25 | Connector As. | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
292-5402 Flange Gp-Wheel
| 13***47 | Filter Group-Oil; -Hydraulic, Power Train | 1 |
| 14***28 | Connector Assem. | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
257-3969 Lines Gp-Differential Lock
| 08***91 | Bolt; (M10x1.5x55-mm) | 4 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***34 | Tee As-Orfs | 1 |
297-2505 Lines Gp-Differential Lock
| 08***91 | Bolt; (M10x1.5x55-mm) | 4 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***62 | Elbow Group | 1 |
257-3925 Lines Gp-Hydraulic Filter
| 14***25 | Connector As. | 2 |
| 14***68 | Elbow Group | 1 |
| 15***68 | Tee Group | 1 |
257-3973 Lines Gp-Hydrostatic -High Speed Axle
| 22***35 | Flange | 1 |
| 25***97 | Bolt-Socket Head; (M12x1.75x35-mm) | 1 |
| 25***73 | Lines Group-Hydrostatic; -High Speed Axle | 1 |
257-3935 Lines Gp-Hydrostatic -Standard Axle
| 25***35 | Lines Group-Hydrostatic; -Standard Axle | 1 |
| 27***79 | Plate | 4 |
| 7X***79 | Bolt; (M24x3x240-mm) | 8 |
276-8702 Lines Gp-Power Train Oil -Axle Speed Select
| 09***24 | Ring-Retaining | 3 |
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 1 |
| 19***69 | Plug; (Thrust) | 1 |
275-9377 Mounting Gp-Axle
| 25***35 | Lines Group-Hydrostatic; -Standard Axle | 1 |
| 25***36 | Lines Group-Service Brake; -Standard Axle | 1 |
| 25***69 | Lines Group-Differential Lock | 1 |
255-6014 Mounting Gp-Hydrostatic Pump
| 25***14 | Mounting Group-Hydrostatic Pump | 1 |
| 25***69 | Lines Group-Differential Lock | 1 |
| 25***73 | Lines Group-Hydrostatic; -High Speed Axle | 1 |
292-5374 Planetary Gp-Final Drive
| 25***35 | Lines Group-Hydrostatic; -Standard Axle | 1 |
| 25***36 | Lines Group-Service Brake; -Standard Axle | 1 |
| 26***41 | Axle & Transfer Drive Group-Rear; -Standard, With Differential Lock | 1 |
301-1148 Power Train Ar -High Speed Axle, With Differential Lock
| 14***73 | Valve Group-Tire | 1 |
| 18***01 | Tire; (405/70-R18) | 1 |
| 25***47 | Rim As; (13x18) | 1 |
294-7994 Power Train Ar -Standard Axle, With Differential Lock
| 25***73 | Lines Group-Hydrostatic; -High Speed Axle | 1 |
| 25***74 | Lines Group-Service Brake; -High Speed Axle | 1 |
| 26***10 | Switch Group-Rocker; -High Speed Select | 1 |
294-7926 Power Train Ar -Standard Axle, With Differential Lock
| 25***35 | Lines Group-Hydrostatic; -Standard Axle | 1 |
| 25***36 | Lines Group-Service Brake; -Standard Axle | 1 |
| 26***41 | Axle & Transfer Drive Group-Rear; -Standard, With Differential Lock | 1 |
301-1147 Power Train Ar -Standard Axle, With Differential Lock
| 10***26 | Bolt; (M24x19.1-mm) | 8 |
| 30***47 | Power Train Ar; -Standard Axle, With Differential Lock | 1 |
| 31***31 | Shaft As-Drive | 1 |
301-1146 Power Train Ar -Standard Axle, With Differential Lock
| 10***26 | Bolt; (M24x19.1-mm) | 8 |
| 30***46 | Power Train Ar; -Standard Axle, With Differential Lock | 1 |
| 31***30 | Shaft As-Drive | 1 |
294-7927 Power Train Ar -High Speed Axle, With Differential Lock
| 25***35 | Lines Group-Hydrostatic; -Standard Axle | 1 |
| 25***36 | Lines Group-Service Brake; -Standard Axle | 1 |
| 26***41 | Axle & Transfer Drive Group-Rear; -Standard, With Differential Lock | 1 |
272-0169 Shaft Gp-Drive -High Speed Axle
| 14***73 | Valve Group-Tire | 1 |
| 14***34 | Tire (16/70-20) | 1 |
| 19***63 | Rim As; (11"X20") | 1 |
272-0167 Shaft Gp-Drive -Standard Axle
| 14***73 | Valve Group-Tire | 1 |
| 14***34 | Tire (16/70-20) | 1 |
| 19***63 | Rim As; (11"X20") | 1 |
259-2945 Tire & Rim Gp
| 10***08 | Kit-Seal; (Solenoid Valve, Quick Steer) | 1 |
| 23***26 | Coil As | 2 |
| 24***60 | Valve Group-Solenoid | 1 |
259-2941 Tire & Rim Gp -Rh
| 14***73 | Valve Group-Tire | 1 |
| 25***41 | Tire & Rim Group; -Rh | 1 |
| 25***43 | Rim As; (11x18) | 1 |
259-2949 Tire & Rim Gp
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 2 |
| 25***30 | Kit-Seal; (Valve) | 1 |
| 25***49 | Tire & Rim Group | 1 |
259-2929 Tire & Rim Gp -Rh
| 14***73 | Valve Group-Tire | 1 |
| 25***29 | Tire & Rim Group; -Rh | 1 |
| 25***40 | Tire; (340/80-R18) | 1 |
259-2952 Tire & Rim Gp
| 10***17 | Seal-O-Ring | 2 |
| 12***81 | Bolt-Socket Head; (M10x1.5x55-mm) | 4 |
| 17***15 | Seal-O-Ring | 1 |
259-2815 Tire & Rim Gp
| 14***73 | Valve Group-Tire | 1 |
| 25***15 | Tire & Rim Group | 1 |
| 25***40 | Tire; (340/80-R18) | 1 |
259-2944 Tire & Rim Gp -Lh
| 14***73 | Valve Group-Tire | 1 |
| 25***44 | Tire & Rim Group; -Lh | 1 |
| 25***53 | Rim As; (10x17.5) | 1 |
259-2930 Tire & Rim Gp -Lh
| 14***73 | Valve Group-Tire | 1 |
| 18***75 | Tire; (335/80-R18) | 1 |
| 25***30 | Tire & Rim Group; -Lh | 1 |
274-8048 Valve & Mtg Gp-Solenoid -Differential Lock
| 16***46 | Bolt; (M12x1.75x18-mm) | 8 |
| 20***53 | Gear; (60-Teeth) | 1 |
| 20***58 | Bushing | 8 |
260-5411 Valve & Mtg Gp-Solenoid -Axle Speed Select
| 14***78 | Valve Group | 1 |
| 26***11 | Valve & Mtg Group-Solenoid; -Axle Speed Select | 1 |
289-6366 Valve Gp-Flushing -Hydrostatic Drive Motor
| 25***43 | Fender Group-Rear | 1 |
| 25***51 | Wheel & Tire Group | 1 |
| 26***92 | Fender Group-Front | 1 |
292-5404 Wheel & Brake Gp -Front
| 25***43 | Fender Group-Rear | 1 |
| 25***46 | Wheel & Tire Group | 1 |
| 26***92 | Fender Group-Front | 1 |
301-7786 Wheel & Fender Ar
| 20***19 | Nut; (M20x1.5-Thd) | 32 |
| 25***15 | Tire & Rim Group | 4 |
| 30***86 | Wheel & Fender Ar, Block | 1 |
332-1834 Wheel & Fender Ar
| 20***19 | Nut; (M20x1.5-Thd) | 32 |
| 25***41 | Tire & Rim Group; -Rh | 2 |
| 25***44 | Tire & Rim Group; -Lh | 2 |
301-7785 Wheel & Fender Ar
| 20***19 | Nut; (M20x1.5-Thd) | 32 |
| 25***29 | Tire & Rim Group; -Rh | 2 |
| 25***30 | Tire & Rim Group; -Lh | 2 |
301-7781 Wheel & Fender Ar
| 25***43 | Fender Group-Rear | 1 |
| 25***42 | Wheel & Tire Group | 1 |
| 26***92 | Fender Group-Front | 1 |
301-7782 Wheel & Fender Ar
| 25***43 | Fender Group-Rear | 1 |
| 26***92 | Fender Group-Front | 1 |
| 27***77 | Mounting Group-Axle | 1 |
331-3193 Wheel & Tire Gp
| 10***27 | Film-Identification; (20-Km/H)(20 Kph) | 3 |
| 20***77 | Guard Group-Bucket; -Roading | 1 |
| 25***49 | Plate-Identification; (English, German, Spanish) | 1 |
259-2942 Wheel & Tire Gp
| 20***19 | Nut; (M20x1.5-Thd) | 32 |
| 25***42 | Wheel & Tire Group | 1 |
| 25***49 | Tire & Rim Group | 4 |
259-2939 Wheel & Tire Gp
| 20***19 | Nut; (M20x1.5-Thd) | 32 |
| 25***39 | Wheel & Tire Group | 1 |
| 25***52 | Tire & Rim Group | 4 |
259-2951 Wheel & Tire Gp
| 11***17 | Cover As-Front | 4 |
| 11***48 | Pin | 2 |
| 12***52 | Film-Identification; (35-Km/H) | 3 |
259-2946 Wheel & Tire Gp
| 10***27 | Film-Identification; (20-Km/H)(20 Kph) | 3 |
| 11***17 | Cover As-Front | 4 |
| 11***48 | Pin | 2 |
259-2928 Wheel & Tire Gp
| 20***19 | Nut; (M20x1.5-Thd) | 32 |
| 25***28 | Wheel & Tire Group | 1 |
| 25***45 | Tire & Rim Group | 4 |
Service Equipment And Supplies
303-2126 Chock Gp-Wheel
| 30***26 | Chock Group-Wheel | 1 |
300-4086 Film Gp -International
| 30***86 | Film Group; -International | 1 |
300-4085 Film Gp -U.S.
| 30***85 | Film Group; -U.S. | 1 |
304-9376 Plate & Film Gp -Environmental
| 30***76 | Plate & Film Group; -Environmental | 1 |
293-9241 Plate & Film Gp
| 29***41 | Plate & Film Group | 1 |
Steering System
257-3976 Cylinder Gp-Steering
| 25***76 | Cylinder Group-Steering | 1 |
| 25***77 | Pin | 1 |
| 30***83 | Plate | 1 |
293-4350 Lines Gp-Steering
| 25***36 | Bearing | 1 |
| 25***71 | Kit-Seal; (Metering Pump, Steering) | 1 |
| 26***35 | Race-Bearing | 2 |
257-3924 Lines Gp-Steering -With Check Valve
| 25***36 | Bearing | 1 |
| 25***24 | Lines Group-Steering; -With Check Valve | 1 |
| 29***02 | Kit-Seal; (Hmu Steering Pump) | 1 |
259-2850 Mounting Gp-Steering Cylinder
| 25***27 | Pump Group-Metering; -Hmu-Standard Flow | 1 |
| 25***50 | Mounting Group-Steering Cylinder | 1 |
| 29***50 | Lines Group-Steering | 1 |
260-5420 Pump Gp-Metering -Hmu-Boosted Aux Hydraulic Flow
| 25***24 | Lines Group-Steering; -With Check Valve | 1 |
| 26***20 | Pump Group-Metering; -Hmu-Boosted Auxiliary Hydraulic Flow | 2 |
257-3927 Pump Gp-Metering -Hmu-Standard Flow
| 25***27 | Pump Group-Metering; -Hmu-Standard Flow | 1 |
| 26***20 | Pump Group-Metering; -Hmu-Boosted Auxiliary Hydraulic Flow | 1 |
| 29***50 | Lines Group-Steering | 1 |
282-7724 Steering Ar
| 15***06 | Valve-Gas | 1 |
| 16***96 | Service Kit; (Includes Seals) | 1 |
| 17***03 | Film-Warning; (Accum, High Press, Read Omm)(Plate-Name) | 1 |
301-9750 Steering Ar -Auxiliary, Boosted
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 10***18 | Spring | 2 |
| 14***20 | Bolt-Socket Head; (M6x1x75-mm) | 1 |
282-7725 Steering Ar -Auxiliary, Boosted
| 16***60 | Accumulator Group-Ride Control; -Charged | 1 |
| 28***25 | Steering Ar; -Auxiliary, Boosted | 1 |
Work Tools
216-8756 Arm Gp-Material Handling
| 13***37 | Edge; (2060mm) | 1 |
| 14***04 | Edge Group-Cutting | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
284-9281 Bucket Ar-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***39 | Cylinder Group-Multipurpose Bukt | 2 |
284-9282 Bucket Ar-General Purpose
| 14***03 | Edge Group-Cutting | 1 |
| 28***44 | Bucket Ar-Multipurpose | 1 |
| 28***82 | Bucket Ar-General Purpose | 1 |
284-9279 Bucket Ar-General Purpose
| 13***37 | Edge; (2060mm) | 1 |
| 14***04 | Edge Group-Cutting | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
284-9280 Bucket Ar-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***39 | Cylinder Group-Multipurpose Bukt | 2 |
261-1391 Bucket Ar-Light Material
| 14***03 | Edge Group-Cutting | 1 |
| 26***91 | Bucket Ar-Light Material | 1 |
| 26***00 | Bucket Ar-Multipurpose | 1 |
261-1385 Bucket Ar-Light Material
| 14***99 | Tooth Group-Uni | 7 |
| 26***85 | Bucket Ar-Light Material | 1 |
| 28***44 | Bucket Ar-Multipurpose | 1 |
284-9286 Bucket Ar-Multipurpose
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***86 | Bucket Ar-Multipurpose | 1 |
284-9283 Bucket Ar-Multipurpose
| 13***32 | Edge; (1880-mm) | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
263-8700 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 7 |
| 26***00 | Bucket Ar-Multipurpose | 2 |
284-9284 Bucket Ar-Multipurpose
| 13***32 | Edge; (1880-mm) | 1 |
| 17***72 | Film-Identification; (Bucket Level)(Bucket Level Indicator) | 2 |
| 25***22 | Bulldozer As | 1 |
284-2844 Bucket Ar-Multipurpose
| 13***32 | Edge; (1880-mm) | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
284-9285 Bucket Ar-Multipurpose
| 13***32 | Edge; (1880-mm) | 1 |
| 17***72 | Film-Identification; (Bucket Level)(Bucket Level Indicator) | 2 |
| 25***23 | Clam As; (Multipurpose Bucket) | 1 |
261-1330 Bucket Gp-General Purpose
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 26***30 | Bucket Group-General Purpose | 1 |
261-1341 Bucket Gp-General Purpose
| 26***07 | Switch Group-Rocker; -Quick Coupler Pin Lock | 1 |
| 26***41 | Bucket Group-General Purpose | 1 |
| 27***26 | Coupler Group-Quick; -Vertical Pin Lock | 1 |
259-6021 Bucket Gp-Multipurpose
| 17***13 | Cylinder Group-Coupler | 1 |
| 23***59 | Coupler Group-Quick; -Horizontal Pin Lock | 1 |
| 25***39 | Lines Group-Auxiliary Hydraulic; -Horizontal Pin Lock Coupler | 1 |
263-8701 Bucket Gp-Multipurpose
| 25***52 | Lines Group-Auxiliary Hydraulic; -Vertical Pin Lock Coupler, Boosted Auxiliary Hydraulic Flow | 1 |
| 26***07 | Switch Group-Rocker; -Quick Coupler Pin Lock | 1 |
| 26***26 | Wiring Group-Cab; -Work Tool, Boosted Auxiliary Hydraulic Flow Switches | 1 |
260-1716 Carriage Gp-Fork
| 23***60 | Coupler As | 1 |
| 23***61 | Plate-Cover | 1 |
| 23***62 | Pin | 2 |
261-1350 Carriage Gp-Fork
| 26***50 | Carriage Group-Fork | 1 |
| 27***02 | Pin | 1 |
| 27***03 | Pin | 2 |
257-4024 Coupler Ar-Quick -Horizontal Pin Lock
| 13***25 | Edge-Cutting; (2080mm) | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 13 |
| 25***24 | Coupler Ar-Quick; -Horizontal Pin Lock | 1 |
340-7022 Coupler Ar-Quick -Horizontal Pin Lock
| 16***80 | Positioner Group-Fork | 1 |
| 34***22 | Coupler Ar-Quick; -Horizontal Pin Lock | 1 |
346-4707 Coupler Ar-Quick -Horizontal Pin Lock
| 22***29 | Positioner Group-Fork | 1 |
| 34***07 | Coupler Ar-Quick; -Horizontal Pin Lock | 1 |
257-4023 Coupler Ar-Quick -Vertical Pin Lock
| 13***24 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 13 |
| 25***23 | Coupler Ar-Quick; -Vertical Pin Lock-Vertical | 1 |
281-2340 Coupler Ar-Quick -Vertical Pin Lock, Boosted Auxiliary Hydraulic Flow
| 16***80 | Positioner Group-Fork | 1 |
| 28***40 | Coupler Ar-Quick; -Vertical Pin Lock, Boosted Auxiliary Hydraulic Flow | 1 |
237-5559 Coupler Gp-Quick -Horizontal Pin Lock
| 22***29 | Positioner Group-Fork | 1 |
| 23***59 | Coupler Group-Quick; -Horizontal Pin Lock | 1 |
274-1326 Coupler Gp-Quick -Vertical Pin Lock
| 22***29 | Positioner Group-Fork | 1 |
| 27***26 | Coupler Group-Quick; -Vertical Pin Lock | 1 |
141-5004 Edge Gp-Cutting
| 14***04 | Edge Group-Cutting | 1 |
| 19***42 | Fork Group-Pallet | 12 |
141-5003 Edge Gp-Cutting
| 14***03 | Edge Group-Cutting | 1 |
| 19***43 | Fork Group-Pallet | 12 |
161-2437 Fork Gp-Pallet
| 10***11 | Retainer As | 2 |
| 10***12 | Chain | 1 |
| 10***13 | Spring | 1 |
243-0002 Fork Gp-Pallet -Kit
| 22***45 | Film-Warning; (Do Not Use Ether, U.S) | 1 |
| 22***13 | Film; (Warning) (Jump Start) (Inside Of Lh Battery Box Cover) | 1 |
| 22***75 | Film-Warning; (Crush Hazard, Read Omm, U.S.) | 2 |
195-8545 Fork Gp-Pallet
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 19***45 | Fork Group-Pallet | 1 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
243-0001 Fork Gp-Pallet -Kit
| 14***96 | Chock-Wheel | 1 |
| 17***35 | Lock Pin | 1 |
| 24***01 | Fork Group-Pallet; -Kit | 1 |
243-0003 Fork Gp-Pallet -Kit
| 22***44 | Film-Warning; -Universal | 1 |
| 22***46 | Film-Warning; (No Ether Spray/Air Intk, Intl) | 1 |
| 22***12 | Film; (Warning) (Jump Start) (On Outside Of Battery Compartment Door) | 1 |
195-6942 Fork Gp-Pallet
| 16***60 | Pin-Spring | 4 |
| 19***37 | Plate | 2 |
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
149-7665 Fork Gp-Pallet
| 14***65 | Fork Group-Pallet | 1 |
| 19***45 | Fork Group-Pallet | 12 |
195-6943 Fork Gp-Pallet
| 18***86 | Step As | 1 |
| 19***43 | Fork Group-Pallet | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
209-3477 Guard Gp-Bucket -Roading
| 15***33 | Film-Identification; (12-Volt) | 1 |
| 20***77 | Guard Group-Bucket; -Roading | 1 |
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
270-2515 Lock Gp-Mechanical -Quick Coupler
| 16***30 | Film-Identification; (Biodegradable Hydraulic Oil) | 1 |
| 27***15 | Lock Group-Mechanical; -Quick Coupler | 1 |
188-7733 Step Gp-Material Handling Arm
| 18***33 | Step Group-Material Handling Arm | 1 |
141-4999 Tooth Gp-Uni
| 14***99 | Tooth Group-Uni | 1 |
906H serial number reference
The PIN plate sits on the left (highway) side of the loader frame, ahead of the cab and above the left front tire; the tag can be paint-covered and may need cleaning to read. The full PIN reads as the model code followed by a 3-letter prefix and a 5-digit sequence number (e.g., prefix SDH plus 00001-and-up); the 3-letter prefix identifies the build/engine series, and the digits track the individual unit within that series.
| Prefix | Identifies | Notes |
|---|---|---|
| SDH | 906H compact wheel loader, C3.4 IND engine (Tier III) | Later-run 906H build, powered by the Cat C3.4 diesel meeting EPA Tier III emissions. Listed as SDH00001-and-up in factory parts and service documentation for this loader; this is the engine/prefix combination shown on the Caterpillar 906H/907H/908H product literature for the C3.4-powered build. |
| TPE | 906H compact wheel loader, 3044C engine | Earlier-run 906H build, carrying the 3044C diesel used before the C3.4 changeover. Listed as TPE00001-and-up in parts catalog and service documentation for this loader; the 3044C pairing for this range also appears on independent engine-parts listings for the 906H. |
Frequently asked questions
What engine does the Cat 906H use?
The 906H runs a Cat C3.4 diesel: four cylinders, 3.4 L displacement, turbocharged with a mechanical fuel system, rated 52 kW (70 hp) net at 2500 rpm. It meets Tier 3 emissions and has no diesel particulate filter or regeneration cycle, unlike the later 906H2.
What is the operating weight of the Cat 906H?
Operating weight runs about 5,630 kg (12,412 lb) with a standard bucket. Actual weight varies by bucket size, counterweight, and attached work tool, so confirm the figure for your specific configuration.
What replaced the Cat 906H?
Caterpillar replaced the 906H with the 906H2 around 2015, which switched to a Tier 4 Interim Cat C3.3B engine with a diesel particulate filter and active regeneration. The 906H2 was later followed by the current 906M generation.
What 906H owners discuss
What's the general feel of the 906H's hydrostatic drivetrain, and what should I check if hydraulics lose power mid-job?
Operators describe smooth, stepless speed control through the joystick FNR switch, well suited to repetitive short-cycle loading, with both axle differentials locking on the go for traction in soft or uneven ground. The usual trade-off: hystat drive is less efficient than a powershift transmission at longer travel distances or higher road speeds, so it suits yard and site work better than long hauls between stockpiles. If hydraulic function drops out mid-job, check the hydraulic enable/disable switch position first; a switch left off or faulty reads as a dead system. On higher-hour or hard-used machines, a slipped drive-pump coupling is a recurring cause of lost or erratic hydrostatic power once fluid level, filters, and switches check out clean.
Does the 906H use the same engine across its production run?
No. The original 906H runs a Cat C3.4 four-cylinder diesel rated around 52 kW (70 hp) at 2500 rpm, built to Tier 3 / Stage IIIA emissions without a particulate filter. Caterpillar later updated the line as the 906H2 with a Cat C3.3B rated near 56 kW (75 hp) to meet Tier 4 Interim, adding a diesel particulate filter with in-cylinder dosing for regeneration. Treat the two as different engine families when pricing parts or troubleshooting; regen-related symptoms and DPF service belong to the H2 update, not the original C3.4 machine, so confirm which engine is actually under the hood before assuming either applies.
The articulation joint feels loose. What's the wear story on these loaders?
Center-pivot and lift-arm pins and bushings wear from contaminated grease more than from load itself. Dirt packed against the fitting before greasing gets forced into the pin bore on the next shot and acts like grinding paste inside the joint. Wipe fittings clean before each greasing and don't stretch the interval on a machine working dusty or muddy ground. Noticeable play at the joint, grooving or spalling on a pulled pin, or a knock during articulation are the usual signs it's time to measure against wear limits rather than just re-grease and hope.
What tire wear pattern is typical on a compact loader like this, and what causes it?
Heel-and-toe wear on one or more tires is common and tracks to the hard braking and high torque reversals inherent to short-cycle loader work. One-sided or scrubbed wear points to a mechanical cause instead, a bent axle, worn kingpins, or misalignment, and isn't normal wear. Keep inflation to spec: underinflated tires wear both shoulders, overinflated tires wear the crown, and either way the constant stop-start, tight-turn duty cycle of a compact loader accelerates whichever pattern gets started.
Loader cranks fine but won't move, and the dash shows Neutral. What's the usual electrical culprit?
Start with the transmission range sensor and the emergency-stop switch; either one stuck or reporting incorrectly can hold the machine in neutral and block engagement even though the transmission itself is fine. Chafed harness wiring, a corroded connector pin, or a cracked boot at the range sensor show up more often than the sensor failing outright. Pull fault codes from the transmission control module and check hydraulic fluid level and condition too, since low or dirty fluid can mimic an electrical no-engage fault.
Can a telematics fault put the machine in neutral while it's actually moving?
Yes, on specific 906H and 908H units the Product Link telematics unit can send a corrupted message onto the machine's datalink when it first powers on or reboots, which the transmission controller reads as a command to drop to neutral. If that happens while the loader is moving, it stops the machine unexpectedly, a real hazard on a grade or working near other equipment or people. This is resolved with a firmware update or unit swap, not a field workaround. Have your dealer verify the Product Link firmware level and confirm the fix is applied before returning the machine to work.
What should I check before buying a used 906H?
Walk the machine before starting it: bucket cutting edge and teeth for uneven wear or welded repairs, lift arms for cracks or dents, and any quick-coupler pins and bushings for play. Check all four tires separately for sidewall cuts, mismatched brands, or retreads; that alone says a lot about how the machine was run and maintained. Inspect every hydraulic hose and cylinder rod for leaks, scoring, or scratches, and cycle loader and tilt functions through full travel while watching for drift or lag. Pop the hood for oil and coolant leaks and belt condition, and check the air filter's last-service tag against the hour meter, most air filters run on a roughly 1,000-hour interval. In the cab, check grab irons and step condition and run the joystick and pedals through full range. If the seller has dealer access, ask for the fault code history; a machine with recent unexplained resets is worth a second look before you commit.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 906H part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.