Caterpillarwheel-type loadercompact wheel loader
Caterpillar 906
Maintenance schedule, common problems & OEM parts breakdown
The Cat 906 is a compact, articulated wheel-type loader built around a hydrostatic drivetrain and a Z-bar loader linkage. Caterpillar has used the 906 nameplate across separate, non-contiguous generations rather than one continuous run. The original 906 (part of the 902/906/908 compact loader family) built roughly 1998-2007 ran a Cat 3044C engine near 51-56 kW (68-75 hp). A later 906M generation, built roughly 2015-2022, carried a Cat C3.3B DIT engine rated near 55 kW (74 hp). The current production 906, part of Caterpillar's Next Generation compact wheel loader line launched in 2022, runs a Cat C2.8 engine at 55.7 kW (74 hp) gross. Operating weight spans roughly 4.9-5.9 t (10,900-13,000 lb) depending on generation, bucket, and counterweight configuration. Configurations offered include general-purpose, multi-purpose, and light-material buckets, standard or high-flow hydraulics, and different quick-coupler and tire choices. A distinct 906H/906H2 line exists alongside these but is a separate variant family, not a direct link in the plain-906 generational chain.
Across generations the 906 moved from a conventional diesel powerplant toward a fully hydrostatic, shift-on-the-go drivetrain with electronic controls, and from mechanical engine tuning to Tier 4 Final/Stage V emissions compliance without diesel exhaust fluid. Recent generations kept peak power close to flat while adding torque, roading speed, fuel tank capacity, and cab sealing and visibility, aimed at operator comfort and cycle efficiency rather than raw output. For today's used and parts market, this reused nameplate is the whole story: the 906 badge alone does not tell you which engine, hydraulic architecture, or coupler a given machine has, so generation and serial number have to be confirmed before ordering major components. The machine's small footprint and maneuverability keep demand steady in municipal, rental, landscaping, and yard-handling fleets, which sustains a healthy used-equipment and parts supply across all three generations even as the newest C2.8-powered machines dominate new sales.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 906 specifications
Engine
| Engine model (1998–2007 generation) | Cat 3044C, four-cylinder turbocharged diesel, approx. 3.3–3.4 L displacement; bore 94 mm (3.7 in), stroke reported 120–122 mm (4.72–4.8 in) depending on source |
| Gross power (1998–2007 generation) | 55.9 kW (75 hp) at 2,600 rpm |
| Net power (1998–2007 generation) | 50.7 kW (68 hp); ISO 9249 net rating 71 hp |
| Emissions tier (1998–2007 generation) | Not documented in factory literature reviewed; predates widely-published EPA/EU tier ratings commonly cited for this compact-loader class |
| Engine model (current generation, 2022–present) | Cat C2.8, four-cylinder turbocharged diesel, 2.8 L (171 in³) displacement; bore 90 mm (3.54 in), stroke 110 mm (4.33 in) |
| Gross power (current generation) | 55.7 kW (74.7 hp) at 2,400 rpm rated speed; max gross torque 300 N·m (222 lb-ft) at 1,600 rpm |
| Net power (current generation) | 54.2 kW (72.7 hp), SAE J1349; net torque 296 N·m (218 lb-ft) |
| Emissions tier (current generation) | Two factory options: U.S. EPA Tier 4 Final / EU Stage V, or U.S. EPA Tier 3 / EU Stage IIIA equivalent (Tier 3 version rated marginally higher: +0.3 kW/0.4 hp gross power, +0.2 kW/0.3 hp net power). No diesel exhaust fluid required on this engine size |
Weights
| Operating weight (1998–2007 generation) | Approx. 4,950–5,110 kg (10,912–11,270 lb); figure varies by source and configuration |
| Operating weight (current generation, general-purpose bucket) | 5,730 kg (12,628 lb) with horizontal pin-lock (HPL-V) coupler; 5,835 kg (12,859 lb) with vertical-pin (SSL-style) coupler |
| Shipping weight | Not published in sources reviewed for either generation |
| Ground pressure | Not published in sources reviewed for either generation (wheeled machine; not a typically published figure for this class) |
Dimensions
| Transport length (1998–2007 generation) | 5.04–5.06 m (16.54–16.6 ft), bucket on ground |
| Transport length (current generation) | 5.37 m / 17 ft 7 in with HPL-V coupler; 5.53 m / 18 ft 1 in with SSL-style coupler |
| Width over tires (1998–2007 generation) | 1.87–1.89 m (6.14–6.20 ft), minor variance across sources |
| Width over tires (current generation) | 1.84–1.85 m (6 ft / 6.08 ft) |
| Height to top of cab (1998–2007 generation) | 2.68 m (8.8 ft) |
| Height to top of cab (current generation) | 2.47 m (8 ft 1 in); height to beacon 2.65 m (8 ft 8 in) |
| Overall height, loader arms/attachment raised (current generation) | 4.12–4.21 m (13 ft 6 in–13 ft 9 in), varies with tire and coupler selection |
| Wheelbase (1998–2007 generation) | 1.98 m (6.5 ft) |
| Wheelbase (current generation) | 2.17 m (7 ft 1 in) |
| Ground clearance | Current generation: 300 mm (11.8 in); not published for 1998–2007 generation |
| Hinge pin max height / reach (1998–2007 generation) | Hinge pin max height 3.12 m (10.25 ft); reach at max lift and dump 0.79 m (2.6 ft) |
| Tread width / gauge | 1998–2007 generation approx. 1.40 m (54.96 in); current generation tread center 1.42 m (4 ft 7 in) |
| Tire size | 1998–2007 generation listed as 12.5x18 or 12.5-20 depending on source; current generation standard 405/70 R18 |
| Turning radius | 1998–2007 generation approx. 4.1 m outside (single-source figure); current generation approx. 4.0–4.01 m (13 ft 1 in) outside tires, 4.4–4.48 m (14 ft 5 in–14 ft 8 in) over bucket |
| Articulation angle / frame oscillation (current generation) | 39° each direction articulation; ±11° frame oscillation |
Performance
| Travel speed (1998–2007 generation) | Approx. 19.3–20 km/h (12 mph), forward and reverse |
| Travel speed (current generation) | 3-range hydrostatic transmission: 10 km/h (6 mph) creep/range 1, 20 km/h (12 mph) standard range 2, 40 km/h (25 mph) optional high-range 3 for roading; reverse max 30 km/h (19 mph) |
| Breakout force (1998–2007 generation) | 46.0 kN (10,340 lb) |
| Tipping load, straight, full bucket (1998–2007 generation) | 3,423 kg (7,546 lb) |
| Tipping load, full turn, full bucket (1998–2007 generation) | 3,024 kg (6,666 lb) |
| Tipping load, straight, full bucket (current generation) | Approx. 4,427 kg (9,756–9,760 lb), varies with coupler configuration |
| Tipping load, full turn, full bucket (current generation) | Approx. 3,731–3,907 kg (8,225–8,610 lb), varies with coupler configuration |
| Hydraulic system pressure and flow (current generation) | Main relief pressure 23,500 kPa (3,408 psi); pump flow approx. 21–22 gal/min (75–80 L/min) standard mode, up to 31–32 gal/min (115 L/min) in high-flow mode |
| Gradeability / drawbar pull | Not published in factory literature reviewed for either generation |
Service capacities (summary)
| Fuel tank (1998–2007 generation) | 74.2 L (19.6 gal) |
| Fuel tank (current generation) | 70 L (18.5 gal), including filter and lines |
| Hydraulic system, including tank (1998–2007 generation) | 66.2 L (17.5 gal) |
| Hydraulic system, including tank (current generation) | 67.5 L (17.8 gal) |
| Engine oil / crankcase (1998–2007 generation) | 9.8 L (2.6 gal) |
| Engine oil / crankcase (current generation) | 8.8 L (2.3 gal) |
| Cooling system (1998–2007 generation) | 20.8 L (5.5 gal) |
| Cooling system (current generation) | 12 L (3.2 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
906 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (service refill, with filter change) | 8.8 L (2.3 US gal) on the current C2.8-engine 906. The prior 906M generation (C3.3B engine) lists 11.2 L (2.96 US gal); the original 906 (3044C engine) is documented around 9.8 L (2.6 US gal). Capacity varies by generation/engine. | Cat DEO-ULS (API CK-4) is the preferred oil for the Tier 4 Final/EU Stage V engine option (fitted with a diesel particulate filter); Cat DEO (API CI-4/CI-4 PLUS) is acceptable on the Tier 3/Stage IIIA-equivalent, non-aftertreatment engine option sold in lesser-regulated markets. Viscosity by ambient temperature: SAE 15W-40 for -10 to 50°C (14 to 122°F), SAE 10W-30 for -18 to 40°C (0 to 104°F), Cat DEO-ULS SYN 5W-40 down to -30°C (-22°F), Cat DEO Cold Weather 0W-40 down to -40°C (-40°F). |
| Cooling system | 12 L (3.2 US gal) on the current 906. The 906M generation lists 17 L (4.49 US gal); an earlier figure near 20.8 L (5.5 US gal) is reported for the original 906. Capacity varies by generation. | Cat Extended Life Coolant (ELC), factory-filled for protection to -36°C (-33°F); a more concentrated ELC fill extending protection to -50°C (-58°F) is offered for arctic duty. Use as a 1:1 premix with water; add Cat ELC Extender at coolant mid-life (about 6 years/6,000 hours into a 12,000-hour/6-year service life). Do not mix with conventional (DEAC) coolant. |
| Fuel tank (includes filter and lines) | 70 L (18.5 US gal) on the current 906. An older-generation figure near 74 L (19.6 US gal) is reported; capacity varies by generation/configuration. | Ultra-low sulfur diesel (ULSD, ≤15 ppm sulfur) is required where the Tier 4 Final/EU Stage V engine option is fitted; low-sulfur diesel is acceptable on the Tier 3/Stage IIIA-equivalent engine option in lesser-regulated markets. Approved blends include up to B20 biodiesel (FAME), or up to 100% renewable diesel/HVO/GTL fuel. No Diesel Exhaust Fluid is required at this engine size. |
| Hydrostatic transmission (drive circuit) | 2.4 L (0.6 US gal). | Shares the hydraulic oil circuit (see Hydraulic system below). Factory fill is Cat HYDO Advanced 10, SAE 10W. |
| Front axle center differential | 8.8 L (2.3 US gal). | Cat TDTO (Transmission/Drive Train Oil), SAE 30, factory fill; approved ambient range -20 to 43°C (-4 to 110°F) for this compartment on the 902/906/908 compact-wheel-loader family. On the 906M generation the axle differential instead takes about 8 L (2.11 US gal) plus roughly 0.8 L (0.21 US gal) per planetary wheel hub, same TDTO fluid family. |
| Rear axle center differential | 8.8 L (2.3 US gal). | Cat TDTO, SAE 30, factory fill — same specification as the front axle differential. |
| Hydraulic system (including tank) | 67.5 L (17.8 US gal) total system; the hydraulic tank alone holds 44.6 L (11.8 US gal). | Cat HYDO Advanced 10 (SAE 10W) is the factory fill; Cat Bio HYDO Advanced (ISO 46 multigrade, EU Ecolabel-approved biodegradable oil) is offered where a biodegradable fluid is required. Viscosity by ambient temperature: HYDO Advanced 10 SAE 10W for -20 to 40°C (-4 to 104°F), HYDO Advanced 20 SAE 20W for -5 to 45°C (23 to 113°F), HYDO Advanced 30 SAE 30 for 0 to 50°C (32 to 122°F), Bio HYDO Advanced for -30 to 45°C (-22 to 113°F). |
| Service brakes | Shares the hydraulic circuit; no separate fill volume is published. | Cat HYDO Advanced 10, SAE 10W, for -20 to 40°C (-4 to 104°F) ambient, per the compact-wheel-loader special-application chart. |
| Grease (all pin, pivot, and bearing points) | Spec only, no fill volume applicable. | Duty-cycle dependent: Cat Extreme Application Grease (NLGI 1 or 2) for high-load, continuous truck-loading duty; Cat Prime Application Grease (NLGI 2) for medium-load, general-purpose duty; Cat Utility Grease (NLGI 2) for light/utility duty. Fan drive bearings take Cat Ball Bearing Grease (NLGI 2). |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 906 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
| Every 10,000 h |
|
Servicing the 906 beyond the schedule
Predictive Maintenance & Fluid Analysis
The 906's hydrostatic drive and engine carry factory S·O·S sample ports for engine oil and hydraulic oil. Pull samples on schedule to catch wear metal in the hystat pump and motor before a charge-pressure drop turns into a field stall. Sample front and rear differential and final drive gear oil on the same clock, and log coolant condition every time the cooling system is opened. On machines still running the Cat 3044C or C3.3B engine, oil analysis carries even more weight, since parts support thins as those generations age out.
Corrective & Common Repairs
Most 906 repair calls trace to the Z-bar loader linkage and articulation hitch: grease-starved pins and bushings wear loose and show up as bucket rack-back slop or wandering steering. Quick-coupler wear plates on HPL-V or SSL mounts need shimming once bucket chatter starts. Hydrostatic drive hose and fitting leaks are the next most common fault, usually at the pump-to-motor lines. Fuel/water separators on the Tier 4 Final fuel system clog faster with dirty fuel and often need draining more often than the printed interval suggests.
Overhaul & Rebuild Points
High-hour 906 rebuilds center on the hydrostatic pump and drive motor, the front and rear final drives, and the articulation/oscillation bearing at the hitch. Gear and bearing wear inside the differential-and-final-drive housings shows up as backlash and calls for a teardown rather than a top-off. Engine overhaul scope depends on generation: the Cat 3044C, C3.3B DIT, and C2.8 all use different in-frame kits and top-end parts. Cab and ROPS mounts, plus loader-arm pivot bores, should be checked for wear at the same major-overhaul horizon.
Seasonal & Environment Servicing
Cold-climate 906s should run the higher-CCA battery option, a block heater, and coolant checked for full freeze protection before winter. Hot, dusty sites call for more frequent air precleaner and radiator/hydraulic-cooler core cleaning, plus shorter fuel/water separator drain cycles to protect the Tier 4 Final fuel system. On wet or abrasive ground, review tire choice (standard tread versus a foam-fill or traction pattern) and check the pressurized cab door seals, since a worn seal lets dust reach cab filtration and electronics.
906 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 138-3100 | Element-Water Separator | Fuel system service | Check fitment → |
| 134-8726 | Filter Element As-Air | Air intake service | Check fitment → |
| 140-2334 | Filter Element As-Air | Air intake service | Check fitment → |
| 120-7448 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 151-0914 | Filter Element-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
906 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| SPN 110 / FMI 0 | Engine coolant temperature above the normal operating range, most severe level. | Low coolant level, blocked or dirty radiator core, failed cooling fan or fan drive, stuck thermostat, or a faulty coolant temperature sensor. | Reduce load, idle down, and shut off the engine at a safe stop. Let it cool, then check coolant level and clear debris from the radiator and oil cooler fins before restart. |
| SPN 100 / FMI 1 | Engine oil pressure below the normal operating range for current engine speed, most severe level. | Low oil level, plugged oil filter, worn oil pump, or a failed oil pressure sensor or its wiring. | Stop the engine immediately, check oil level and filter condition, and inspect sensor wiring before restarting. |
| SPN 168 / FMI 4 | Electrical system (battery) voltage below the normal operating range, sensed low or shorted low. | Weak or failing battery, loose or corroded battery terminal or ground strap, worn alternator belt, or a failing alternator. | Check battery state of charge and terminal connections, inspect belt tension, then test alternator output. |
| SPN 97 / FMI 3-4 | Water-in-fuel sensor circuit voltage reading abnormal: above normal at FMI 3, below normal or shorted low at FMI 4. This points to a sensor or wiring fault rather than a confirmed water alarm; an actual water-detected condition is reported under separate FMI values that vary by engine configuration. | Corroded or damaged sensor connector, chafed harness wiring, an open or shorted circuit, or a failing water-in-fuel sensor. | Inspect the sensor connector and harness for damage or corrosion, check circuit continuity and reference voltage, and drain the water separator bowl as routine maintenance regardless of the fault. |
| SPN 94 / FMI 1 | Engine fuel delivery (rail) pressure reading below the expected value for current operating conditions. | Restricted or clogged fuel filter, air drawn into the fuel system, a weakening transfer/lift pump, or a pinched or leaking fuel line. | Inspect the fuel filter and lines for restriction, bleed air from the fuel system, and check lift pump output. |
| SPN 84 / FMI 2 | Wheel-based ground speed signal is erratic, intermittent, or incorrect. | Damaged or misaligned speed sensor, corroded connector, or chafed harness wiring at the drive axle or transmission output. | Inspect the speed sensor, air gap, and connector for damage or corrosion before clearing the fault. |
| SPN 91 / FMI 2 | Accelerator/inching pedal position sensor signal is erratic, intermittent, or incorrect. | Failing pedal position sensor, damaged harness, or a corroded connector at the pedal assembly. | Inspect the pedal sensor and connector, then recalibrate or replace the sensor following ECM procedure. |
| SPN 190 / FMI 8 | Engine speed signal has an abnormal frequency, pulse width, or period, typically pointing to a crank or cam speed/timing sensor issue. | Failing crank or cam position sensor, damaged tone wheel, or a loose sensor connector; an incorrect sensor air gap is a common root cause. | Check sensor air gap with a feeler gauge, inspect crank/cam sensor wiring, and check for a stored companion code before replacing a sensor. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
906 attachments & work tools
Machine/series identification
Current-generation 906 Compact Wheel Loader runs Cat's C2.8 engine (about 74.7 hp / 55.7 kW) paired with a hydrostatic drivetrain, part of the 903-908 compact wheel loader range. Higher-output H/H2-series versions share the same attachment coupler pattern but carry different engine and hydraulic-flow ratings, so flow-dependent tool ratings should be checked against the plain 906 spec sheet, not the H-series one.
General purpose buckets
Sized 0.80-1.35 m3 (1.0-1.7 yd3) for this class. Bolt-on cutting edge, mounted on the standard pin-on/coupler frame, and selected by material density to keep the machine within its stable tipping load.
Multi-purpose buckets
Clamshell-style 4-in-1 buckets sized 0.75-1.1 m3 (1.0-1.4 yd3), used for grading, clamping and light dozing as well as loading.
Light material buckets
Higher-volume, lower-density buckets sized 1.25-1.55 m3 (1.6-2.0 yd3) for mulch, wood chips and similar low-density loads.
Pallet forks
Class II fork carriage with tines around 1220 mm (4 ft) long and a 500 mm (20 in) load center, built to ISO 14397-1 fork requirements. Open-frame carriage gives sightlines to the tine tips at ground level and truck-bed height, and width adjusts tool-free across several locking positions.
Bale handling attachments
Single- or dual-tine bale spears offered in 890 mm (35 in) and 1140 mm (45 in) lengths, plus bale grabs with a clamp opening in the 1800-2130 mm (71-84 in) range, for round or square bales in ag work.
Grapple attachments
Grapple buckets and grapple forks add a hydraulically clamped rake or tine set over a bucket or fork frame, for brush, waste and loose debris. Grapple or light material buckets are a recommended pairing for the Waste Handler configuration.
Brooms
Utility and pickup brooms sweep or collect light debris on paved surfaces in forward or reverse travel, powered off the auxiliary hydraulic circuit.
Snow work tools
Straight snow pushes in roughly 2.44 m, 3.05 m and 3.66 m (8, 10, 12 ft) widths and angle blades in the 1830-2130 mm (72-84 in) range are offered for snow removal, alongside a snow-focused machine setup with added LED work lighting.
Coupler and mounting systems
Standard mount is a hydraulically actuated quick coupler. Dealer literature for this range lists a Horizontal Pin Lock coupler (offered in HPL-V and HPL-A patterns) and a Vertical Pin/skid-steer-pattern coupler, with an adapter available to run skid-steer-mount tools through the horizontal pin-lock frame.
Auxiliary/hydromechanical hydraulics
A joystick-actuated third-function auxiliary circuit with a pressure-compensated valve powers hydromechanical tools (brooms, grapples and similar) while lift and tilt stay usable at the same time. Standard flow for this size class runs roughly 50-60 L/min (13-16 gpm); a higher-flow circuit is offered as an upgrade on some higher-spec trims in the series - flow rating varies by configuration/series, confirm against the specific machine's hydraulic spec before ordering flow-sensitive tools.
AG Handler factory configuration
Application package for agricultural duty adds a high-speed travel range, engine air pre-cleaner for dusty conditions, ag-pattern tires, LED road and work lighting, and front/rear camera options.
Waste Handler factory configuration
Application package for waste/industrial duty adds a reversing cooling fan, front and rear light guarding, a choice of solid or heavy-duty pneumatic tires, LED work lights, front/rear cameras, seatbelt-notification beacon, back-up alarm, and typically pairs with light-material or grapple buckets.
Ground-engaging and specialty tools
Augers, trenchers, cold planers, stump grinders and wheel saws are catalogued across the compact wheel loader attachment line and run off the auxiliary hydraulic circuit. Fitment on this specific 906 size class is not broken out separately in factory literature, so match tool flow/pressure and coupler pattern to the machine spec sheet before ordering.
Material handling arm/jib
An optional material handling arm mounts to the loader frame for controlled single-point lifting, rated to about 907 kg (2,000 lb) maximum load.
All 906 assemblies by section
Every catalogued assembly group for the Caterpillar 906. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
140-2331 Air Cleaner Gp
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
| 13***26 | Filter Element As-Air; (Primary) | 1 |
| 14***31 | Air Cleaner Group | 1 |
138-2231 Extension Gp-Exhaust -Tall
| 13***31 | Extension Group-Exhaust; -Tall | 1 |
| 14***47 | Pipe-Exhaust | 1 |
| 14***50 | Clamp-Muffler | 1 |
149-3515 Extension Gp-Muffler
| 14***50 | Clamp-Muffler | 1 |
| 14***09 | Muffler As | 1 |
| 14***15 | Gasket; Gasket, Extension Group-Muffler | 1 |
153-0523 Flange Gp-Exhaust
| 13***64 | Stud | 3 |
| 15***23 | Flange Group-Exhaust | 1 |
153-0415 Manifold Gp-Exhaust
| 10***54 | Nut | 2 |
| 15***12 | Stud | 2 |
| 15***15 | Manifold Group-Exhaust | 1 |
153-0403 Manifold Gp-Inlet
| 10***05 | Bolt; (M8x1.25x110-mm) | 1 |
| 15***03 | Manifold Group-Inlet | 1 |
| 15***05 | Gasket-Manifold | 1 |
Basic Engine
171-2824 Camshaft Gp
| 10***41 | Bolt; (M6x1x10-mm) | 2 |
| 15***60 | Bushing | 1 |
| 15***62 | Plug | 1 |
188-9065 Camshaft Gp
| 10***41 | Bolt; (M6x1x10-mm) | 2 |
| 15***62 | Plug | 1 |
| 15***64 | Key-Woodruff | 1 |
159-0065 Cover Gp-Front Housing
| 10***05 | Bolt; (M8x1.25x90-mm) | 1 |
| 12***61 | Bolt; (M8x1.25x95-mm) | 2 |
| 15***55 | Cover | 1 |
164-7623 Cover Gp-Front Housing
| 10***71 | Bolt | 2 |
| 10***87 | Bolt; (M10x1.5x85-mm) | 2 |
| 15***55 | Cover | 1 |
153-0115 Cover Gp-Valve Mechanism
| 06***06 | Plug | 1 |
| 10***75 | Seal | 3 |
| 15***04 | Hose; (Fumes Disposal) | 1 |
152-6789 Crankshaft Gp
| 15***89 | Crankshaft Group | 1 |
| 15***90 | Crankshaft Group | 1 |
| 15***91 | Kit-Bearing | 1 |
171-4663 Crankshaft Gp
| 15***91 | Kit-Bearing | 1 |
| 15***99 | Washer-Thrust | 2 |
| 15***01 | Gear-Crankshaft; (30-Teeth) | 1 |
188-9039 Crankshaft Gp
| 15***90 | Crankshaft Group | 1 |
| 15***91 | Kit-Bearing | 1 |
| 15***95 | Kit-Rod Bearing | 1 |
152-6553 Cylinder Block Gp
| 15***53 | Cylinder Block Group | 1 |
| 15***54 | Cylinder Block Group | 1 |
| 15***55 | Dowel | 2 |
171-2792 Cylinder Block Gp
| 15***55 | Dowel | 2 |
| 15***56 | Seal | 1 |
| 17***92 | Cylinder Block Group | 1 |
152-6554 Cylinder Block Gp
| 06***09 | Plug-Facing | 2 |
| 15***54 | Cylinder Block Group | 1 |
| 15***57 | Seal | 2 |
205-5490 Cylinder Block Gp
| 06***06 | Plug | 2 |
| 06***07 | Plug | 1 |
| 06***09 | Plug-Facing | 2 |
172-6704 Cylinder Head Gp
| 15***57 | Valve-Exhaust | 4 |
| 15***58 | Spring | 8 |
| 15***59 | Cap | 8 |
171-2803 Cylinder Head Gp
| 15***62 | Bolt-Cylinder Head; (M11x1.5x104-mm) | 14 |
| 15***63 | Bolt-Cylinder Head; (M11x1.5-Thd, M8x1.25-Thd) | 4 |
| 15***64 | Gasket-Cylinder Head | 1 |
152-9853 Cylinder Head Gp
| 15***53 | Cylinder Head Group | 1 |
| 15***54 | Cylinder Head Group | 1 |
| 15***62 | Bolt-Cylinder Head; (M11x1.5x104-mm) | 14 |
140-2348 Drain Gp-Engine Oil
| 14***48 | Drain Group-Engine Oil | 1 |
| 15***55 | Adapter | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
153-0077 Flywheel Gp
| 03***39 | Gear-Starter; (112-Teeth) | 1 |
| 15***72 | Flywheel As | 1 |
| 15***73 | Bolt | 8 |
153-1014 Housing Gp-Flywheel
| 10***27 | Plate | 1 |
| 15***13 | Dowel | 2 |
| 15***14 | Housing Group-Flywheel | 1 |
188-9048 Housing Gp-Front
| 10***51 | Bolt; (M8x1.25x65-mm) | 1 |
| 10***91 | Plug | 3 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 1 |
152-6729 Housing Gp-Front
| 10***91 | Plug | 2 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 1 |
171-2823 Housing Gp-Front
| 10***51 | Bolt; (M8x1.25x65-mm) | 1 |
| 10***91 | Plug | 2 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 1 |
153-0561 Lifting Gp-Engine
| 10***58 | Bolt; (M8x1.25x14-mm) | 4 |
| 15***61 | Lifting Group-Engine | 1 |
| 15***63 | Plate | 2 |
153-1176 Mounting Gp-Alternator
| 15***76 | Mounting Group-Alternator | 1 |
| 6I***54 | Bolt; (M10x1.5x70-mm) | 1 |
138-2253 Mounting Gp-Engine
| 13***64 | Bolt-Hex Head; (M14x2.0x25mm) | 1 |
| 13***53 | Mounting Group-Engine | 1 |
| 14***38 | Support As-Front | 1 |
225-2452 Pan Gp-Oil
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
| 12***02 | Tube As | 1 |
| 15***82 | Gauge As-Oil; (Dipstick)(Engine) | 1 |
153-0085 Pan Gp-Oil
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
| 12***02 | Tube As | 1 |
225-5356 Pan Gp-Oil
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
| 12***02 | Tube As | 1 |
137-6391 Piston & Rod Gp
| 13***91 | Piston & Rod Group | 1 |
| 15***29 | Kit-Piston Ring | 4 |
| 16***90 | Rod As; (Connecting)(B) | 4 |
153-0693 Plug Gp-Cylinder Block
| 06***24 | Plug | 1 |
| 15***93 | Plug Group-Cylinder Block | 1 |
153-0567 Plug Gp-Flywheel Housing
| 13***70 | Plug | 8 |
| 15***67 | Plug Group-Flywheel Housing | 1 |
153-0319 Pulley Gp-Crankshaft
| 15***14 | Washer | 1 |
| 15***17 | Screw | 1 |
| 15***19 | Pulley Group-Crankshaft | 1 |
171-2808 Valve Mechanism Gp
| 03***62 | Plug | 2 |
| 15***72 | Rocker Arm As | 1 |
| 15***73 | Shaft As-Rocker Arm | 1 |
152-6571 Valve Mechanism Gp
| 03***62 | Plug | 2 |
| 15***71 | Valve Mechanism Group | 1 |
| 15***72 | Rocker Arm As | 1 |
Braking System
224-6907 Control Gp-Foot Brake
| 10***34 | Switch As-Limit; (Service Brake) | 1 |
| 11***84 | Bumper | 1 |
| 13***22 | Pad | 1 |
138-0230 Control Gp-Parking Brake
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 2 |
| 13***30 | Control Group-Parking Brake | 1 |
| 13***31 | Lever As | 1 |
137-7768 Control Gp-Parking Brake
| 12***76 | Nut; (M14x1.5-Thd) | 2 |
| 13***68 | Control Group-Parking Brake | 1 |
| 14***48 | Cable As | 1 |
138-0232 Control Gp-Service Brake
| 09***81 | Pin-Spring | 1 |
| 11***84 | Bumper | 1 |
| 13***22 | Pad | 1 |
137-7744 Control Gp-Service Brake
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***44 | Control Group-Service Brake | 1 |
| 13***45 | Cylinder Group-Master; -Brake | 1 |
137-7745 Cylinder Gp-Master -Brake
| 09***22 | Boot | 1 |
| 13***45 | Cylinder Group-Master; -Brake | 1 |
| 15***17 | Kit-Seal | 1 |
Cooling System
153-1183 Connection Gp-Water
| 11***41 | Connection | 2 |
| 15***83 | Connection Group-Water | 1 |
153-0377 Connection Gp-Water
| 11***59 | Bolt; (M10x1.5x35-mm) | 2 |
| 15***77 | Connection Group-Water | 1 |
| 19***55 | Gasket; (Water Temperature Regulator) | 1 |
138-2239 Fan Gp-Suction
| 13***39 | Fan Group-Suction; -Axle Oil Cooler | 1 |
| 13***40 | Fan As; (9-Blade) | 1 |
| 14***70 | Adapter | 1 |
153-0165 Pump Gp-Water
| 10***53 | Stud | 4 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 12***36 | Clamp-Hose | 2 |
138-2235 Radiator & Fan Gp
| 12***27 | Cap As-Radiator | 1 |
| 13***52 | Radiator As | 1 |
| 13***35 | Radiator & Fan Group | 1 |
149-3494 Recovery Gp-Coolant
| 14***11 | Cap-Vented; (Coolant Recovery) | 1 |
| 14***94 | Recovery Group-Coolant | 1 |
Electrical And Starting System
3e-7585 Lamp Gp-Head & Signal
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***49 | Lens As; (Headlight) | 1 |
149-3491 Alternator Gp-Charging
| 14***64 | Alternator Group-Charging | 1 |
| 14***91 | Alternator Group-Charging | 1 |
| 15***51 | Spacer; (11x8.7x27mm Thk) | 1 |
140-2326 Alternator Gp-Charging
| 14***26 | Alternator Group-Charging | 1 |
| 14***54 | Alternator Group-Charging | 1 |
| 14***85 | Guard-Belt | 1 |
137-7775 Battery & Wiring Gp
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
138-4936 Battery Gp -Heavy Duty
| 13***20 | Box As-Battery | 1 |
| 13***21 | Clamp | 1 |
| 13***36 | Battery Group; -Heavy Duty | 1 |
138-4935 Battery Gp -Standard Duty
| 13***20 | Box As-Battery | 1 |
| 13***21 | Clamp | 1 |
| 13***35 | Battery Group; -Standard Duty | 1 |
3e-7843 Control Gp-Position -Work Tool
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***43 | Control Group-Bucket Positioner; (Bucket Positioner) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
141-7556 Control Gp-Electronic Filter
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***21 | Terminal-Blade; (18-Ga To 22-Ga) | 3 |
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
153-0524 Glow Plug Gp
| 15***24 | Glow Plug Group | 1 |
| 16***58 | Cable | 3 |
| 17***59 | Plug-Glow | 4 |
172-4448 Heater Gp-Jacket Water
| 15***30 | Heater Group-Jacket Water | 1 |
| 17***48 | Heater Group-Jacket Water | 1 |
| 9X***72 | Strap-Cable | 1 |
172-4447 Heater Gp-Jacket Water
| 15***29 | Heater Group-Jacket Water | 1 |
| 17***47 | Heater Group-Jacket Water | 1 |
| 9X***72 | Strap-Cable | 1 |
154-3929 Heater Gp-Jacket Water
| 13***17 | Cap As-Dust | 1 |
| 14***65 | Element As-Jacket Water Heater | 1 |
| 15***29 | Heater Group-Jacket Water | 1 |
154-3930 Heater Gp-Jacket Water
| 12***09 | Cord As-Heater Element; -240-Volt | 1 |
| 13***17 | Cap As-Dust | 1 |
| 15***95 | Element As-Jacket Water Heater | 1 |
199-4005 Installation Ar-Security
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
152-8180 Lamp Gp-Flood -Suspended Mount
| 15***80 | Lamp Group-Flood; -Suspended Mount | 1 |
| 15***54 | Lens As; (Flood) | 1 |
| 15***55 | Body As | 1 |
174-6808 Lamp Gp-Head -With Signal, Lh
| 13***43 | Lamp Group-Head & Signal; -Dipped, Lh | 1 |
| 17***08 | Lamp Group-Head; -With Signal, Lh | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
174-6809 Lamp Gp-Head -With Signal, Lh
| 13***42 | Lamp Group-Head & Signal; -Dipped, Lh | 1 |
| 17***09 | Lamp Group-Head; -With Signal, Lh | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
174-6806 Lamp Gp-Head -With Signal, Lh
| 13***41 | Lamp Group-Head & Signal; -Dipped, Rh | 1 |
| 17***06 | Lamp Group-Head; -With Signal, Lh | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
174-6807 Lamp Gp-Head -With Signal, Rh
| 13***40 | Lamp Group-Head & Signal; -Dipped, Rh | 1 |
| 17***07 | Lamp Group-Head; -With Signal, Rh | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
138-4943 Lamp Gp-Head & Signal -Dipped, Lh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 13***39 | Lens As | 1 |
| 13***43 | Lamp Group-Head & Signal; -Dipped, Lh | 1 |
212-9357 Lamp Gp-Head & Signal -Rh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 2 |
| 10***49 | Lens As; (Headlight) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
226-9934 Lamp Gp-Head & Signal
| 10***55 | Lamp Group-Head & Signal; -Lh | 1 |
| 22***34 | Lamp Group-Head & Signal; -Lh | 1 |
226-9935 Lamp Gp-Head & Signal
| 22***35 | Lamp Group-Head & Signal; -Rh | 1 |
| 3E***82 | Lamp Group-Head & Signal; -Rh | 1 |
138-4940 Lamp Gp-Head & Signal -Dipped, Rh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 13***38 | Lens As | 1 |
| 13***40 | Lamp Group-Head & Signal; -Dipped, Rh | 1 |
212-9358 Lamp Gp-Head & Signal -Lh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 2 |
| 10***49 | Lens As; (Headlight) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
138-4941 Lamp Gp-Head & Signal -Dipped, Rh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 13***38 | Lens As | 1 |
| 13***41 | Lamp Group-Head & Signal; -Dipped, Rh | 1 |
3e-9382 Lamp Gp-Head & Signal -Rh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
104-5255 Lamp Gp-Head & Signal -Lh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
138-4942 Lamp Gp-Head & Signal -Dipped, Lh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 0 |
| 13***39 | Lens As | 1 |
| 13***42 | Lamp Group-Head & Signal; -Dipped, Lh | 1 |
144-9933 Lamp Gp-Panel Illumination
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***33 | Lamp Group-Panel Illumination; -Backlight | 1 |
| 18***10 | Lamp; (12-Volt)(Miniature) | 2 |
196-0030 Lamp Gp-Registration Plate
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 19***12 | Lamp; (12-Volt, 10-Watt) | 1 |
142-8634 Lamp Gp-Stop & Tail -Stop, Tail
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***34 | Lamp Group-Stop & Tail; -Stop, Tail | 1 |
157-4956 Lamp Gp-Stop & Tail
| 14***21 | Plate As | 2 |
| 14***34 | Lamp Group-Stop & Tail; -Stop, Tail | 2 |
| 15***31 | Reflector | 2 |
217-3840 Lamp Gp-Stop & Tail
| 14***34 | Lamp Group-Stop & Tail; -Stop, Tail | 2 |
| 15***31 | Reflector | 2 |
| 21***23 | Bracket | 2 |
128-6985 Lamp Gp-Warning Beacon -12-Volt, Amber
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 9R***42 | Plug As | 1 |
| 9R***58 | Cord As | 1 |
138-4912 Lighting Ar-Roading -Dipped, Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***12 | Lighting Ar-Roading; -Dipped, Lh | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 5 |
138-4911 Lighting Ar-Roading
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***55 | Lamp Group-Head & Signal; -Lh | 1 |
| 13***11 | Lighting Ar-Roading | 1 |
180-6455 Lighting Gp-Flood -4-Lamp, Cab
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***91 | Fuse; (15-Ampere) | 2 |
| 13***84 | Switch As; (Floodlight) | 1 |
138-0204 Lighting Gp-Flood -4-Lamp, Cab
| 13***04 | Lighting Group-Flood; -4-Lamp, Cab | 1 |
| 18***55 | Lighting Group-Flood; -4-Lamp, Cab | 1 |
219-3265 Lighting Gp-Roading -Dipped, Lh
| 21***22 | Bracket As; (Rh)(Rh) | 1 |
| 21***23 | Bracket As; (Lh)(Lh) | 1 |
| 21***65 | Lighting Group-Roading; -Dipped, Lh | 1 |
219-3266 Lighting Gp-Roading
| 20***45 | Strap-Cable | 2 |
| 21***57 | Lamp Group-Head & Signal; -Rh | 1 |
| 21***58 | Lamp Group-Head & Signal; -Lh | 1 |
217-6219 Lighting Gp-Roading -Dipped, Rh
| 10***55 | Lamp Group-Head & Signal; -Lh | 1 |
| 21***19 | Lighting Group-Roading; -Dipped, Rh | 1 |
| 21***22 | Bracket As; (Rh)(Rh) | 1 |
217-6214 Lighting Gp-Roading -Dipped, Rh
| 20***45 | Strap-Cable | 2 |
| 21***14 | Lighting Group-Roading; -Dipped, Rh | 1 |
| 21***15 | Bracket As; (Rh) | 1 |
138-4947 Lighting Gp-Warning Beacon
| 10***50 | Switch As-Rocker; (Warning Beacon, Power Recep)(Warning Beacon) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
206-8661 Lighting Gp-Warning Beacon
| 10***50 | Switch As-Rocker; (Warning Beacon, Power Recep)(Warning Beacon) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 20***65 | Lamp Group-Warning Beacon | 1 |
141-0374 Sensor Gp-Liquid Level -Service Brake
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***74 | Sensor Group-Liquid Level; -Service Brake | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
179-2122 Service Gp-Power Train -Hydrostatic
| 12***97 | Screw-Pan Head; (No 8-32x0.375-In) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 14***59 | Control As | 1 |
153-0564 Solenoid Gp-Shutoff
| 15***64 | Solenoid Group-Shutoff; -Fuel Injection | 1 |
| 15***66 | Gasket | 1 |
| 17***09 | Solenoid As; (Shutoff)(Fuel) | 1 |
138-2254 Starting Motor Gp-Electric
| 13***54 | Starting Motor Group-Electric | 1 |
| 14***55 | Starting Motor Group-Electric | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
138-4916 Switch Gp-Disconnect -Battery
| 13***16 | Switch Group-Disconnect; -Battery | 1 |
| 3E***20 | Plate-Instruction; (Battery) | 1 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
153-0690 Switch Gp-Pressure
| 06***07 | Plug | 1 |
| 15***62 | Adaptor | 1 |
| 15***90 | Switch Group-Pressure; -Engine Oil | 1 |
171-4613 Switch Gp-Pressure
| 06***07 | Plug | 1 |
| 15***62 | Adaptor | 1 |
| 17***13 | Switch Group-Pressure; -Engine Oil | 1 |
138-4927 Warning Gp-Backup
| 11***90 | Fuse; (10 Amp) | 1 |
| 13***27 | Warning Group-Backup | 1 |
| 14***78 | Relay As; (12-Volt)(Differential Lock Sol Valve) | 1 |
216-8575 Wiring Gp-Air Conditioner
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***53 | Kit-Receptacle; (4-Pin) | 1 |
177-9280 Wiring Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
192-4074 Wiring Gp-Cab -Work Tool Positioner
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
| 17***02 | Relay As | 1 |
230-6440 Wiring Gp-Cab
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
236-8150 Wiring Gp-Cab
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
138-0244 Wiring Gp-Cab
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
138-4896 Wiring Gp-Engine
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
192-4075 Wiring Gp-Positioner -Work Tool
| 19***37 | Harness As-Control; (Work Tool Positioner, Boom) | 1 |
| 19***38 | Harness As-Control; (Work Tool Positioner, Frame) | 1 |
| 19***75 | Wiring Group-Positioner; -Work Tool | 1 |
138-0181 Wiring Gp-Radio
| 11***90 | Fuse; (10 Amp) | 1 |
| 13***81 | Wiring Group-Radio | 1 |
| 8E***18 | Antenna Assem. | 1 |
138-4930 Wiring Gp-Work Tool
| 11***91 | Fuse; (15-Ampere) | 2 |
| 13***88 | Switch As-Rocker; (Work Tool) | 1 |
| 13***91 | Switch As-Rocker; (Fourth Function) | 1 |
Engine Arrangement
224-7498 Engine Ar-Primary
| 13***91 | Piston & Rod Group | 1 |
| 15***77 | Flywheel Group | 1 |
| 15***15 | Cover Group-Valve Mechanism | 1 |
139-9581 Engine Ar-Primary
| 13***81 | Engine Ar-Primary | 1 |
| 15***53 | Cylinder Block Group | 1 |
| 15***71 | Valve Mechanism Group | 1 |
163-0248 Engine Ar-Primary
| 13***91 | Piston & Rod Group | 1 |
| 15***77 | Flywheel Group | 1 |
| 15***15 | Cover Group-Valve Mechanism | 1 |
136-9691 Installation Ar-Engine
| 13***91 | Installation Ar-Engine | 1 |
| 13***52 | Separator Group-Water | 1 |
| 13***53 | Mounting Group-Engine | 1 |
148-2268 Installation Gp-Engine
| 11***23 | Fitting | 1 |
| 12***75 | Connector-Filter | 1 |
| 14***28 | Hose-Air | 1 |
Frame And Body
143-7023 Conversion Ar-Roading -Germany
| 10***86 | Kit-First Aid | 1 |
| 10***44 | Plate-Warning; (Slow Moving Vehicle) | 1 |
| 10***27 | Film-Identification; (20-Km/H)(20 Kph) | 3 |
148-6592 Conversion Ar-Roading
| 13***11 | Lighting Ar-Roading | 1 |
| 13***16 | Switch Group-Disconnect; -Battery | 1 |
| 13***27 | Warning Group-Backup | 1 |
227-0793 Conversion Ar-Roading
| 10***27 | Film-Identification; (20-Km/H)(20 Kph) | 3 |
| 10***03 | Restrainer | 1 |
| 11***17 | Cover As-Front | 4 |
148-6588 Conversion Ar-Roading
| 13***12 | Lighting Ar-Roading; -Dipped, Lh | 1 |
| 13***16 | Switch Group-Disconnect; -Battery | 1 |
| 14***88 | Conversion Ar-Roading | 1 |
180-4587 Conversion Ar-Roading -Nacd
| 13***11 | Lighting Ar-Roading | 1 |
| 13***16 | Switch Group-Disconnect; -Battery | 1 |
| 13***27 | Warning Group-Backup | 1 |
143-7025 Conversion Ar-Roading
| 13***11 | Lighting Ar-Roading | 1 |
| 13***16 | Switch Group-Disconnect; -Battery | 1 |
| 14***25 | Conversion Ar-Roading | 1 |
156-7382 Counterweight Gp-Rear
| 15***80 | Counterweight; (35.1kg)(77.22 Lb) | 1 |
| 15***81 | Counterweight; (45.3kg)(99.66 Lb) | 1 |
| 15***82 | Counterweight Group-Rear | 1 |
143-6873 Door Gp-Access -Lh
| 09***12 | Handle | 1 |
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***85 | Bumper | 1 |
202-9687 Door Gp-Access -Rh
| 16***91 | Latch As-Handle | 1 |
| 20***87 | Door Group-Access; -Rh | 1 |
| 20***58 | Film; (Door)(Rh) | 1 |
202-9688 Door Gp-Access -Lh
| 16***91 | Latch As-Handle | 1 |
| 20***88 | Door Group-Access; -Lh | 1 |
| 20***59 | Film; (Door)(Lh) | 1 |
141-3892 Door Gp-Access -Rh
| 09***12 | Handle | 1 |
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***85 | Bumper | 1 |
156-4472 Enclosure Ar-Hood
| 13***63 | Hood Group | 1 |
| 15***72 | Enclosure Ar-Hood | 1 |
156-4475 Enclosure Ar-Sound Suppression
| 15***85 | Suppression Group-Sound | 1 |
| 15***75 | Enclosure Ar-Sound Suppression | 1 |
| 16***84 | Hood Group; -Sound Suppression | 1 |
154-6650 Extension Gp-Fender
| 15***50 | Extension Group-Fender | 1 |
| 15***98 | Plate | 2 |
| 15***79 | Deflector | 2 |
224-1203 Extension Gp-Fender
| 22***56 | Extension As; (Rh) | 1 |
| 22***11 | Extension As; (Lh) | 1 |
| 22***03 | Extension Group-Fender | 1 |
218-0712 Fender Gp
| 21***37 | Fender; (Rh) | 1 |
| 21***12 | Fender Group | 1 |
| 21***13 | Bracket As | 1 |
218-0709 Fender Gp
| 21***37 | Fender; (Rh) | 1 |
| 21***09 | Fender Group | 1 |
| 21***13 | Bracket As | 1 |
174-4478 Fender Gp-Front
| 14***42 | Fender | 1 |
| 14***97 | Bracket As | 1 |
| 14***41 | Plate | 1 |
174-4477 Fender Gp-Front
| 14***42 | Fender | 1 |
| 14***94 | Bracket As | 1 |
| 14***41 | Plate | 1 |
218-0708 Fender Gp-Front
| 21***08 | Fender Group-Front | 1 |
| 21***09 | Fender Group | 1 |
| 21***12 | Fender Group | 1 |
140-8221 Fender Gp-Front
| 14***21 | Fender Group-Front | 1 |
| 17***77 | Fender Group-Front | 1 |
| 17***78 | Fender Group-Front | 1 |
239-0178 Fender Gp-Front
| 21***37 | Fender; (Rh) | 2 |
| 23***78 | Fender Group-Front | 1 |
| 24***51 | Bracket As | 2 |
137-7765 Fender Gp-Rear
| 13***64 | Bracket | 2 |
| 13***65 | Fender Group-Rear | 1 |
| 14***51 | Plate | 1 |
222-4721 Fender Gp-Rear
| 13***64 | Bracket | 2 |
| 14***51 | Plate | 2 |
| 14***58 | Fender As; (Rear, Rh)(Rh) | 1 |
187-7418 Frame Gp-Loader
| 13***68 | Plate | 1 |
| 13***74 | Bearing | 1 |
| 13***75 | Plate | 1 |
137-7759 Frame Gp-Loader
| 13***59 | Frame Group-Loader | 1 |
| 13***68 | Plate | 1 |
| 13***74 | Bearing | 1 |
137-7761 Frame Gp-Rear
| 13***61 | Frame Group-Rear | 1 |
| 13***67 | Corner; (Rh) | 1 |
| 13***71 | Spacer; (14x74x16-mm Thk) | 2 |
145-3232 Guard Gp-Frame
| 14***27 | Bracket | 4 |
| 14***29 | Plate As | 1 |
| 14***32 | Guard Group-Frame | 1 |
148-8512 Guard Gp-Lines
| 14***12 | Guard Group-Lines | 1 |
| 16***43 | Sleeve-Abrasion; (37.01-In Each) | 0 |
| 16***44 | Sleeve-Abrasion; (31-In Each) | 0 |
148-7065 Handhold Gp
| 14***32 | Bushing | 2 |
| 14***65 | Handhold Group | 1 |
| 17***03 | Tube As | 2 |
226-5412 Hardware Gp-Loader Frame -Fender
| 22***12 | Hardware Group-Loader Frame; -Fender | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 6 |
| 8T***91 | Bolt-Plt; (M10 X 1.5 X 16) | 6 |
137-7783 Hitch Gp-Articulating
| 11***33 | Washer; (11x50x6-mm Thk) | 1 |
| 13***83 | Hitch Group-Articulating | 1 |
| 13***67 | Shim; (2.35-mm Thk) | 1 |
161-7084 Hood Gp -Sound Suppression
| 14***60 | Hinge As; (Hood, Rh) | 2 |
| 14***62 | Spring-Gas; (Hood-Rh) | 1 |
| 14***66 | Bracket As | 1 |
161-7076 Hood Gp -Sound Suppression
| 14***31 | Hood Group | 1 |
| 15***52 | Insulation-Hood | 1 |
| 15***53 | Insulation-Hood | 1 |
137-7763 Hood Gp
| 13***63 | Hood Group | 1 |
| 14***60 | Hinge As; (Hood, Rh) | 2 |
| 14***62 | Spring-Gas; (Hood-Rh) | 1 |
148-9031 Hood Gp
| 10***71 | Clevis | 1 |
| 12***52 | Latch Assem.; (Rh) | 1 |
| 12***27 | Handle As | 1 |
137-7785 Installation Ar-Firewall
| 13***85 | Installation Ar-Firewall | 1 |
| 16***20 | Installation Ar-Firewall | 1 |
161-0020 Installation Ar-Firewall
| 00***10 | Elbow | 1 |
| 11***04 | Plate | 2 |
| 12***75 | Connector-Filter | 1 |
220-5930 Insulation Gp-Weather
| 13***28 | Seal-Composite; (180-cm Each) | 0 |
| 15***86 | Insulation-Rh | 1 |
| 15***88 | Insulation-Lh | 1 |
137-7793 Ladder Gp
| 13***93 | Ladder Group | 1 |
| 14***19 | Step As; (Lh)(Lh) | 1 |
| 14***20 | Step As; (Rh) | 2 |
137-7790 Lines Gp-Grease -Chassis
| 13***90 | Lines Group-Grease; -Chassis | 1 |
| 2T***51 | Hose As-Lube | 2 |
| 2T***42 | Hose As | 1 |
154-4381 Link Gp-Steering Frame Lock
| 15***78 | Cable As | 1 |
| 15***79 | Pin As | 1 |
| 15***80 | Pin As | 1 |
137-7795 Link Gp-Steering Frame Lock
| 13***95 | Link Group-Steering Frame Lock | 1 |
| 15***67 | Link | 1 |
| 1K***61 | Lock-Idler Shaft | 1 |
205-1666 Mounting Gp-Registration
| 10***02 | Spacer | 2 |
| 16***68 | Bracket | 1 |
| 16***19 | Plate | 1 |
177-4539 Panel Gp-Sound Suppression
| 13***28 | Seal-Composite; (180-cm Each) | 3 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
| 14***67 | Elbow Group; (Each Includes) | 2 |
148-2270 Pin Gp-Hitch
| 13***75 | Pin As-Hitch | 1 |
| 14***70 | Pin Group-Hitch | 1 |
| 15***78 | Cable As | 1 |
155-0885 Suppression Gp-Sound
| 13***28 | Seal-Composite; (180-cm Each) | 0 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
| 14***67 | Elbow Group; (Each Includes) | 2 |
177-4538 Suppression Gp-Sound -Cab
| 15***86 | Insulation | 1 |
| 15***91 | Insulation | 1 |
| 17***38 | Suppression Group-Sound; -Cab | 1 |
220-7096 Suppression Gp-Sound
| 17***38 | Suppression Group-Sound; -Cab | 1 |
| 22***30 | Insulation Group-Weather | 1 |
| 22***96 | Suppression Group-Sound | 1 |
190-0548 Suspension Gp-Rear
| 17***23 | Plate | 2 |
| 18***37 | Plate | 2 |
| 18***39 | Plate As | 2 |
222-5598 Suspension Gp-Rear
| 18***71 | Damper | 2 |
| 22***98 | Suspension Group-Rear | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
187-8472 Suspension Gp-Rear
| 17***23 | Plate | 2 |
| 18***95 | Plate As | 2 |
| 18***71 | Damper | 2 |
Fuel System
137-7772 Control Gp-Governor
| 11***56 | Ring-Backup | 2 |
| 12***92 | Rod End | 1 |
| 12***80 | Nut-Special; (M8 X 1.25 Thd)L.Hand | 1 |
227-6665 Filter & Lines Gp-Fuel
| 03***47 | Ferrule | 1 |
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***81 | Nut; (7/16-24-Thd) | 2 |
138-3096 Filter Gp-Fuel
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
153-0489 Filter Gp-Fuel
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***81 | Nut; (7/16-24-Thd) | 2 |
| 03***93 | Ferrule | 2 |
223-0713 Filter Gp-Water Sep & Fuel
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
153-1006 Fitting Gp-Fuel Lines
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 15***06 | Fitting Group-Fuel Lines | 1 |
171-2929 Governor Gp
| 10***45 | Bolt; (M5x0.8x10-mm) | 4 |
| 13***41 | Washer | 1 |
| 13***12 | Nut | 3 |
188-9069 Governor Gp
| 10***45 | Bolt; (M5x0.8x10-mm) | 4 |
| 13***41 | Washer | 1 |
| 13***12 | Nut | 2 |
137-7788 Lines Gp-Fuel
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 06***86 | Connector | 2 |
| 08***18 | Sleeve-Tube; (5/16) | 1 |
165-2465 Pump Gp-Fuel Injection
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 12***33 | Dowel | 1 |
153-1021 Pump Gp-Fuel Injection
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 14***13 | Clip | 2 |
163-2494 Pump Gp-Fuel Injection
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 14***13 | Clip | 2 |
138-2252 Separator Gp-Water
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 3 |
| 03***49 | Plug | 2 |
| 06***69 | Olive-Fuel Tube | 1 |
138-3097 Separator Gp-Water
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
137-7769 Tank & Mtg Gp-Fuel
| 13***69 | Tank & Mtg Group-Fuel | 1 |
| 14***73 | Strap | 1 |
| 14***51 | Tank Group-Fuel | 1 |
211-4165 Tank Gp-Fuel
| 11***53 | Cap-Fuel | 1 |
| 14***14 | Gasket | 1 |
| 21***65 | Tank Group-Fuel | 1 |
148-0751 Tank Gp-Fuel
| 10***56 | Hose (400cm); (400-cm) | 0 |
| 11***53 | Cap-Fuel | 1 |
| 13***34 | Breather; (Hydraulic Oil) | 1 |
Hydraulic System
149-5532 Accumulator Gp-Hydraulic -Uncharged-Pilot Oil
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
144-8005 Accumulator Gp-Hydraulic -Charged-Pilot Oil
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
9t-4006 Cylinder Gp-Multipurpose Bukt
| 16***86 | Seal As-Buffer | 1 |
| 16***94 | Seal-U-Cup | 1 |
| 16***50 | Seal-Wiper | 1 |
138-2289 Cylinder Gp-Coupler
| 13***89 | Cylinder Group-Coupler | 1 |
164-9430 Cylinder Gp-Hydraulic
| 16***30 | Cylinder Group-Hydraulic | 1 |
| 18***13 | Seal As | 1 |
| 18***15 | Ring-Backup | 1 |
134-9838 Cylinder Gp-Hydraulic -Multipurpose Bucket, Steering
| 13***38 | Cylinder Group-Hydraulic; -Multipurpose Bucket, Steering | 1 |
| 13***39 | Cylinder As | 1 |
| 13***44 | Rod As | 1 |
125-0373 Cylinder Gp-Hydraulic -Side Dump Bucket
| 12***73 | Cylinder Group-Hydraulic; -Side Dump Bucket | 1 |
| 12***75 | Cylinder As; (Rh) | 1 |
| 16***86 | Seal As-Buffer | 1 |
134-4485 Cylinder Gp-Lift
| 11***92 | Seal-Lip Type | 1 |
| 13***85 | Cylinder Group-Lift | 1 |
| 14***49 | Ring-Wear | 1 |
135-0532 Cylinder Gp-Tilt
| 09***90 | Seal-U-Cup | 1 |
| 11***93 | Seal-Lip Type | 1 |
| 13***32 | Cylinder Group-Tilt | 1 |
147-1849 Drain Gp-Ecology -Fuel, Hydraulic
| 10***39 | Plug As-Drain; (Hydraulic Tank) | 2 |
| 14***49 | Drain Group-Ecology; -Fuel, Hydraulic | 1 |
| 15***27 | Tube As-Drain | 1 |
136-9688 Hydraulic Ar
| 13***85 | Cylinder Group-Lift | 1 |
| 13***38 | Cylinder Group-Hydraulic; -Multipurpose Bucket, Steering | 1 |
| 13***32 | Cylinder Group-Tilt | 1 |
230-6458 Hydraulic Ar-3 Valve
| 14***13 | Valve Group-Pilot; -Joystick | 1 |
| 14***14 | Valve Group-Pilot; -Auxiliary | 1 |
| 14***19 | Lines Group-Pilot | 1 |
230-6459 Hydraulic Ar-3 Valve
| 22***27 | Valve Group-Bank 3 | 1 |
| 22***03 | Lines Group-Pilot | 1 |
| 23***38 | Cover Group-Console | 1 |
192-2787 Hydraulic Ar-3 Valve -Work Tool Positioner
| 14***13 | Valve Group-Pilot; -Joystick | 1 |
| 14***14 | Valve Group-Pilot; -Auxiliary | 1 |
| 14***18 | Lines Group-Pilot | 1 |
192-4887 Hydraulic Ar-3 Valve -Pilot Control
| 14***13 | Valve Group-Pilot; -Joystick | 1 |
| 14***14 | Valve Group-Pilot; -Auxiliary | 1 |
| 14***18 | Lines Group-Pilot | 1 |
230-6460 Hydraulic Ar-3 Valve -E/H, W/Work Tool Positioner-With Work Tool Positioner
| 19***89 | Valve & Lines Group-Solenoid; -Work Tool Positioner | 1 |
| 19***93 | Positioner Group-Work Tool | 1 |
| 19***75 | Wiring Group-Positioner; -Work Tool | 1 |
230-6457 Hydraulic Ar-3 Valve
| 14***13 | Valve Group-Pilot; -Joystick | 1 |
| 14***14 | Valve Group-Pilot; -Auxiliary | 1 |
| 14***19 | Lines Group-Pilot | 1 |
149-8886 Lines Gp-Bucket
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***45 | Connector As | 2 |
| 14***67 | Elbow Group; (Each Includes) | 2 |
149-8888 Lines Gp-Bucket
| 14***45 | Connector As | 3 |
| 14***72 | Elbow Group | 1 |
| 14***88 | Lines Group-Bucket | 1 |
184-3185 Lines Gp-Bucket -Grapple
| 14***19 | Connector As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
149-1295 Lines Gp-Bucket
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 14***45 | Connector As | 2 |
| 14***95 | Lines Group-Bucket | 1 |
140-1612 Lines Gp-Coupler
| 14***12 | Lines Group-Coupler | 1 |
| 14***28 | Tube As | 1 |
| 14***54 | Washer | 2 |
215-1827 Lines Gp-Coupler
| 14***28 | Tube As | 1 |
| 14***54 | Washer | 2 |
| 14***27 | Elbow | 1 |
140-2654 Lines Gp-Cylinder -Lift/Tilt
| 14***54 | Lines Group-Cylinder; -Lift/Tilt | 1 |
| 14***94 | Tube As | 1 |
| 14***95 | Tube As | 1 |
137-7752 Lines Gp-Hydraulic
| 13***39 | Valve Group-Cooler Bypass; (Low Pressure Hydraulic Oil) | 1 |
| 13***52 | Lines Group-Hydraulic | 1 |
| 14***14 | Hose As | 1 |
140-6427 Lines Gp-Hydraulic Fan
| 08***04 | Tee-Straight Branch | 1 |
| 09***44 | Elbow | 1 |
| 14***27 | Lines Group-Hydraulic Fan | 1 |
137-7750 Lines Gp-Hydraulic Oil Cooler
| 13***50 | Lines Group-Hydraulic Oil Cooler | 1 |
| 14***67 | Hose As | 1 |
| 14***68 | Hose As | 1 |
174-5548 Lines Gp-Load Control Valve
| 14***94 | Tube As | 1 |
| 14***95 | Tube As | 1 |
| 14***85 | Tube As | 1 |
140-6430 Lines Gp-Load Control Valve
| 11***83 | Connector | 1 |
| 11***31 | Bracket As | 1 |
| 11***32 | Bracket As | 1 |
149-2319 Lines Gp-Pilot
| 10***73 | Clip | 2 |
| 14***34 | Hose As | 2 |
| 14***35 | Hose As | 1 |
140-6426 Lines Gp-Pilot
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 10***73 | Clip | 2 |
| 14***26 | Lines Group-Pilot | 1 |
140-2668 Lines Gp-Pilot
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 14***68 | Lines Group-Pilot | 1 |
| 14***94 | Clamp | 2 |
149-2318 Lines Gp-Pilot
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 10***73 | Clip | 2 |
| 14***71 | Hose As | 1 |
229-2003 Lines Gp-Pilot
| 10***73 | Clip | 2 |
| 14***34 | Hose As | 2 |
| 14***35 | Hose As | 1 |
140-1605 Lines Gp-Pump
| 12***88 | Tee | 1 |
| 14***05 | Lines Group-Pump | 1 |
| 14***34 | Plate As | 1 |
146-8919 Lines Gp-Work Tool
| 14***80 | Tube As | 1 |
| 14***82 | Hose As | 2 |
| 14***24 | Tube As | 1 |
137-7756 Mounting Gp-Coupler Cylinder
| 13***56 | Mounting Group-Coupler Cylinder | 1 |
| 16***06 | Pin | 2 |
| 17***03 | Plate-Cover; (Rh) | 1 |
156-5232 Mounting Gp-Cylinder
| 14***83 | Pin As | 2 |
| 15***32 | Mounting Group-Cylinder | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
164-3887 Mounting Gp-Cylinder -Multipurpose Bucket
| 16***65 | Pin | 2 |
| 16***87 | Mounting Group-Cylinder; -Multipurpose Bucket | 1 |
| 3B***17 | Cotter; (Pin) | 4 |
152-8177 Mounting Gp-Cylinder -Multipurpose Bucket
| 15***77 | Mounting Group-Cylinder; -Multipurpose Bucket | 1 |
| 15***78 | Pin | 2 |
| 3B***17 | Cotter; (Pin) | 4 |
140-1606 Mounting Gp-Hydraulic Pump
| 14***06 | Mounting Group-Hydraulic Pump | 1 |
| 6V***78 | Seal-O-Ring | 1 |
| 8T***59 | Bolt; (Socket Head) (M10x1.5x25mm) | 2 |
192-2793 Positioner Gp-Work Tool
| 19***93 | Positioner Group-Work Tool | 1 |
| 19***60 | Clamp | 1 |
| 19***62 | Bracket As | 1 |
215-8193 Pump & Mtg Gp-Hydraulic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***89 | Kit-Seal | 1 |
| 16***49 | Nut-Special | 1 |
140-1603 Pump Gp-Gear
| 11***75 | Kit-Seal | 1 |
| 14***03 | Pump Group-Gear | 1 |
233-9244 Pump Gp-Gear
| 23***44 | Pump Group-Gear | 1 |
140-1609 Tank Gp-Hydraulic
| 14***09 | Tank Group-Hydraulic | 1 |
| 14***69 | Bracket | 1 |
| 14***58 | Connector | 1 |
217-6132 Tank Gp-Hydraulic
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 12 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***56 | Seal-O-Ring | 1 |
146-4071 Tank Gp-Hydraulic
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 0 |
| 12***67 | Cap-Filler | 1 |
192-2789 Valve & Lines Gp-Solenoid -Work Tool Positioner
| 14***47 | Hose As | 1 |
| 14***99 | Hose As | 1 |
| 14***25 | Connector | 1 |
154-2488 Valve & Mtg Gp-Pilot
| 10***72 | Manifold | 1 |
| 15***88 | Valve & Mtg Group-Pilot | 1 |
| 3E***22 | Valve Group-Solenoid | 1 |
211-7758 Valve & Mtg Gp-Solenoid -Coupler
| 17***58 | Manifold | 1 |
| 17***75 | Kit-Seal | 1 |
| 21***45 | Valve Group-Solenoid | 1 |
171-8777 Valve & Mtg Gp-Solenoid
| 17***70 | Manifold | 1 |
| 17***75 | Valve Group-Solenoid | 1 |
| 17***77 | Valve & Mtg Group-Solenoid; -Pilot Oil Shutoff-Hydraulic Lockout | 1 |
164-6895 Valve & Mtg Gp-Solenoid -Coupler
| 14***95 | Valve Group-Solenoid | 1 |
| 16***95 | Valve & Mtg Group-Solenoid; -Coupler | 1 |
| 7T***45 | Manifold-Solenoid Valve | 1 |
154-2489 Valve & Mtg Gp-Solenoid -Coupler
| 15***89 | Valve & Mtg Group-Solenoid; -Coupler | 1 |
| 15***30 | Valve Group-Check | 1 |
| 16***03 | Valve Group-Solenoid | 1 |
233-7132 Valve & Mtg Gp-Solenoid -12-Vdc-Hydraulic Lockout
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 2 |
| 22***98 | Valve Group-Solenoid | 1 |
| 23***32 | Valve & Mtg Group-Solenoid; -12-Vdc-Hydraulic Lockout, Work Tool Psnr | 1 |
220-3392 Valve & Mtg Gp-Solenoid
| 14***03 | Grommet | 1 |
| 19***15 | Valve Group-Solenoid; (Transfer Gear Output Mode) | 1 |
| 20***71 | Kit-Seal; (Solenoid Valve) | 1 |
188-6040 Valve Gp-Bank 3
| 10***72 | Rod | 2 |
| 10***73 | Rod | 1 |
| 12***84 | Housing As-Inlet | 1 |
140-6428 Valve Gp-Bank 3
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 10***16 | Valve Group-Relief; -Pilot Operated-Main | 1 |
| 10***72 | Rod | 2 |
223-7927 Valve Gp-Bank 3
| 12***84 | Housing As-Inlet | 1 |
| 15***35 | Valve Group-Control; -Lift | 1 |
| 15***36 | Housing; (End Cover) | 1 |
226-4781 Valve Gp-Bank 3 -3-Function, With Steering
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 10***91 | Seal Kit | 1 |
| 12***84 | Housing As-Inlet | 1 |
223-7925 Valve Gp-Bank 3
| 12***84 | Housing As-Inlet | 1 |
| 15***35 | Valve Group-Control; -Lift | 1 |
| 15***36 | Housing; (End Cover) | 1 |
9t-7634 Valve Gp-Check -Load
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 10***91 | Seal Kit | 1 |
| 9T***34 | Valve Group-Check; -Makeup | 1 |
174-9627 Valve Gp-Control -Auxiliary
| 16***29 | Spring | 1 |
| 17***27 | Valve Group-Control; -Auxiliary | 1 |
| 1B***14 | Cap Screw--Pipe To Carburetor | 4 |
155-7533 Valve Gp-Control
| 11***06 | Cap-End | 2 |
| 15***33 | Valve Group-Control | 1 |
| 16***29 | Spring | 1 |
172-4142 Valve Gp-Control -Tilt
| 16***29 | Spring | 1 |
| 17***42 | Valve Group-Control; -Tilt | 1 |
| 1B***14 | Cap Screw--Pipe To Carburetor | 4 |
155-7534 Valve Gp-Control
| 11***06 | Cap-End | 2 |
| 15***34 | Valve Group-Control | 1 |
| 16***29 | Spring | 1 |
229-2538 Valve Gp-Control
| 16***29 | Spring | 1 |
| 1B***14 | Cap Screw--Pipe To Carburetor | 4 |
| 22***38 | Valve Group-Control | 1 |
152-1116 Valve Gp-Control -Hydrostatic Motor Control
| 10***98 | Bolt; (M4x65-mm Thk) | 8 |
| 15***16 | Valve Group-Control; -Hydrostatic Motor Control | 1 |
| 15***22 | Solenoid | 2 |
172-4144 Valve Gp-Control -Tilt
| 16***29 | Spring | 1 |
| 17***44 | Valve Group-Control; -Tilt | 1 |
| 1B***14 | Cap Screw--Pipe To Carburetor | 4 |
155-7535 Valve Gp-Control -Lift
| 11***96 | Nut; (1/2) | 1 |
| 15***35 | Valve Group-Control; -Lift | 1 |
| 15***50 | Ring-Backup | 2 |
142-1656 Valve Gp-Cooler Bypass -Hydraulic Oil
| 10***92 | Spring | 1 |
| 10***93 | Poppet | 1 |
| 14***56 | Valve Group-Cooler Bypass; -Hydraulic Oil | 1 |
210-4924 Valve Gp-Drain
| 14***10 | Plug As; (16.36mm Id) | 1 |
| 21***24 | Valve Group-Drain | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
166-3561 Valve Gp-Load Control -Lift
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***38 | Solenoid As | 1 |
| 12***27 | Plug-Orifice | 1 |
166-3562 Valve Gp-Load Control -Tilt
| 12***28 | Valve Group-Relief | 1 |
| 16***62 | Valve Group-Load Control; -Tilt | 1 |
| 19***62 | Valve Group-Check; (Lift Load Control) | 1 |
141-9114 Valve Gp-Pilot -Auxiliary
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***82 | Boot | 1 |
| 14***14 | Valve Group-Pilot; -Auxiliary | 1 |
230-6449 Valve Gp-Pilot -Joystick, 3-Function
| 03***32 | Strap--Harness Assembly To Compressor | 1 |
| 14***16 | Spacer | 1 |
| 23***49 | Valve Group-Pilot; -Joystick, 3-Function | 1 |
152-1814 Valve Gp-Pilot
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***23 | Coil As | 1 |
| 15***24 | Boot | 1 |
230-6453 Valve Gp-Pilot
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***70 | Coil As | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
141-9113 Valve Gp-Pilot -Joystick
| 03***32 | Strap--Harness Assembly To Compressor | 1 |
| 13***24 | Rod-Control | 1 |
| 14***13 | Valve Group-Pilot; -Joystick | 1 |
186-0913 Valve Gp-Relief -Tilt Dump-Line
| 03***79 | Seal-O-Ring (Id=10.82mm) | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 15***03 | Service Kit; (Consist Of Seal, Ring And Spring) | 1 |
186-0912 Valve Gp-Relief -Line
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
155-9926 Valve Gp-Relief
| 15***26 | Valve Group-Relief | 1 |
188-0879 Valve Gp-Relief -Line
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
222-6986 Valve Gp-Relief -Main
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
4z-5848 Valve Gp-Relief -Line
| 03***21 | Ring-Back-Up | 1 |
| 03***79 | Seal-O-Ring (Id=10.82mm) | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
105-7716 Valve Gp-Relief -Pilot Operated
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
222-6985 Valve Gp-Relief
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
149-8395 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***70 | Locknut; (1/4-20-Thd) | 1 |
| 11***19 | Coil As | 1 |
211-3545 Valve Gp-Solenoid
| 0L***13 | Nut-Special; (1/2unf) | 1 |
| 17***75 | Kit-Seal | 1 |
| 20***15 | Coil As | 1 |
171-8775 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***35 | Kit-Seal | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
185-4254 Valve Gp-Solenoid
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 18***54 | Valve Group-Solenoid; -Auxiliary | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
3e-8622 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***66 | Cartridge Assem. | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
223-0495 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***49 | Nut-Special | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
160-7203 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 12***02 | Coil As | 1 |
209-0803 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 14***19 | Cartridge As | 1 |
Implements
138-2375 Control Gp-Work Tool
| 09***41 | Seal-O-Ring (Id=80.00mm) | 2 |
| 10***80 | Boss | 4 |
| 11***37 | Washer; (46x70x1-mm Thk)(1mm`Thk) | 2 |
Lubrication System
144-9968 Filter Gp-Engine Oil
| 10***14 | Ring | 2 |
| 10***15 | Cap | 1 |
| 13***26 | Seal-O-Ring; (19.28mm Od) | 2 |
153-1024 Mounting Gp-Engine Oil Filter
| 11***45 | Connector | 1 |
| 15***24 | Mounting Group-Engine Oil Filter | 1 |
188-9070 Pump Gp-Engine Oil
| 15***83 | Bolt; (M6x1.0x25mm) | 3 |
| 15***85 | Seal-O-Ring | 1 |
| 15***88 | Valve As; (Oil Check)(Engine) | 1 |
171-2948 Pump Gp-Engine Oil
| 15***80 | Pump As-Engine Oil | 1 |
| 15***83 | Bolt; (M6x1.0x25mm) | 1 |
| 15***85 | Seal-O-Ring | 1 |
153-0978 Pump Gp-Engine Oil
| 15***78 | Pump Group-Engine Oil | 1 |
| 15***80 | Pump As-Engine Oil | 1 |
| 15***83 | Bolt; (M6x1.0x25mm) | 1 |
Machine Arrangement
136-9685 Chassis Ar
| 13***85 | Chassis Ar | 1 |
| 13***56 | Mounting Group-Coupler Cylinder | 1 |
| 13***59 | Frame Group-Loader | 1 |
136-9679 Common Ar
| 13***79 | Common Ar | 1 |
| 13***82 | Power Train Ar | 1 |
| 13***85 | Chassis Ar | 1 |
Operator Station
211-5870 Air Conditioner & Mounting Gp
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***90 | Switch As-Rotary; (24-Volt)(A/C, Heater Fan Control) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
215-9483 Air Conditioner Ar
| 21***70 | Lines Group-Air Conditioner | 1 |
| 21***83 | Air Conditioner Ar | 1 |
| 21***27 | Compressor Group-Refrigerant | 1 |
218-0041 Air Conditioner Gp
| 21***70 | Air Conditioner & Mounting Group | 1 |
| 21***74 | Condenser & Mtg Group-Refrigerant | 1 |
| 21***75 | Wiring Group-Air Conditioner | 1 |
211-5871 Air Conditioner Gp
| 15***02 | Valve As; (Water) | 1 |
| 15***32 | Gasket | 1 |
| 15***22 | Seal | 1 |
288-0889 Cab Ar
| 13***49 | Door Group-Cab; -Fixed Window, Rh | 1 |
| 14***27 | Door Group-Cab; -Fixed Window, Lh | 1 |
| 14***29 | Window Group-Rear | 1 |
288-0890 Cab Ar
| 13***46 | Door Group-Cab; -Sliding Window, Lh | 1 |
| 13***49 | Door Group-Cab; -Fixed Window, Rh | 1 |
| 14***29 | Window Group-Rear | 1 |
242-0001 Cab Gp-Enclosed Rops
| 13***56 | Pin | 4 |
| 13***60 | Glass | 1 |
| 13***63 | Glass | 1 |
138-0242 Cab Gp-Enclosed Rops
| 11***81 | Adhesive; (All Joints To Be Sealed) | 1 |
| 13***42 | Cab Group-Enclosed Rops | 1 |
| 13***43 | Cab As | 1 |
235-9726 Canopy Gp-Open Rops
| 12***73 | Film-Identification; (Caterpillar) | 1 |
| 14***69 | Plug | 2 |
| 15***14 | Plug | 5 |
160-8600 Canopy Gp-Open Rops
| 12***73 | Film-Identification; (Caterpillar) | 1 |
| 14***69 | Plug | 2 |
| 14***94 | Canopy As | 1 |
217-6427 Compressor Gp-Refrigerant
| 03***48 | V-Belt; (Pump Drive) | 1 |
| 1P***56 | Plate | 1 |
| 21***27 | Compressor Group-Refrigerant | 1 |
3e-1908 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 31***18 | Valve As-Pressure Relief; (Refrigerant Compressor) | 1 |
211-5874 Condenser & Mtg Gp-Refrigerant
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 15***87 | Grommet | 4 |
| 21***74 | Condenser & Mtg Group-Refrigerant | 1 |
211-5876 Condenser Gp-Refrigerant
| 11***15 | Relay As; (12-Volt)(Junction Box) | 2 |
| 17***45 | Kit-Receptacle; (2-Pin) | 1 |
| 21***76 | Condenser Group-Refrigerant | 1 |
195-4940 Control Gp-Creeper
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 14***44 | Tee Group; (Swivel) | 2 |
208-6093 Control Gp-Handle -Direction, Downshift
| 15***72 | Kit-Receptacle; (2-Pin) | 1 |
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 15***53 | Grommet | 1 |
208-6096 Control Gp-Handle -Forward, Neutral, Reverse, Downshift
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 15***53 | Grommet | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
230-6446 Control Gp-Handle -Forward, Neutral, Reverse, Downshift
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***53 | Grommet | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
230-6447 Control Gp-Handle
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***53 | Grommet | 1 |
144-9923 Control Gp-Steering -Fixed
| 13***83 | Steering Column As | 1 |
| 14***23 | Control Group-Steering; -Fixed | 1 |
| 8T***94 | Bolt-Socket Head; (M10x1.5x20-mm) | 4 |
138-0241 Control Gp-Steering -Adjustable
| 12***70 | Wheel As-Steering | 1 |
| 13***82 | Steering Column As | 1 |
| 13***41 | Control Group-Steering; -Adjustable | 1 |
141-3348 Cover Gp-Cab
| 13***88 | Cover As | 1 |
| 14***48 | Cover Group-Cab | 1 |
| 5P***05 | Seal (Order By Meter) 2m | 0 |
151-0932 Cover Gp-Cab
| 15***32 | Cover Group-Cab | 1 |
| 15***33 | Cover As | 1 |
| 16***91 | Edge-Trim | 1 |
230-6438 Cover Gp-Console
| 23***34 | Panel Group-Instrument | 1 |
| 23***37 | Cover | 1 |
| 23***38 | Cover Group-Console | 1 |
230-6972 Cover Gp-Console
| 13***87 | Cover | 1 |
| 13***74 | Panel Group-Instrument | 1 |
| 23***72 | Cover Group-Console | 1 |
146-9028 Defroster Gp-Cab
| 11***81 | Adhesive; (All Joints To Be Sealed) | 0 |
| 12***11 | Adhesive; (Urethane) | 0 |
| 13***62 | Glass As | 1 |
138-0245 Door Gp-Cab -Sliding Window, Rh
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 1 |
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***28 | Handle As-Paddle | 1 |
138-0249 Door Gp-Cab -Fixed Window, Rh
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 1 |
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***28 | Handle As-Paddle | 1 |
138-0246 Door Gp-Cab -Sliding Window, Lh
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 1 |
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***77 | Latch As-Rotary; (Rh) | 1 |
146-9027 Door Gp-Cab -Fixed Window, Lh
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 1 |
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***77 | Latch As-Rotary; (Rh) | 1 |
146-9026 Duct Gp-Cab Air
| 08***29 | Hose Clip | 4 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 20 |
| 11***29 | Washer; (6.6x22x2-mm Thk) | 5 |
169-1986 Enclosure Gp-Cab
| 16***12 | Plate As | 1 |
| 16***13 | Plate As | 1 |
| 16***14 | Plate | 2 |
147-0290 Filter Gp-Cab Air
| 12***48 | Filter Element-Cab Air; (Cab Air) | 1 |
| 14***90 | Filter Group-Cab Air | 1 |
| 14***09 | Cover As | 1 |
146-9034 Heater & Mtg Gp-Cab
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***90 | Switch As-Rotary; (24-Volt)(A/C, Heater Fan Control) | 1 |
| 11***92 | Fuse; (20 Amp) | 1 |
218-0088 Heater Ar-Cab
| 14***34 | Heater & Mtg Group-Cab | 1 |
| 21***88 | Heater Ar-Cab | 1 |
233-1651 Heater Gp-Cab
| 15***02 | Valve As; (Water) | 1 |
| 15***32 | Gasket | 1 |
| 15***35 | Coil As-Heater | 1 |
138-0266 Heater Gp-Cab
| 13***66 | Heater Group-Cab | 1 |
| 15***02 | Valve As; (Water) | 1 |
| 15***32 | Gasket | 1 |
160-4864 Liner Gp-Cab -Sound Suppression
| 16***51 | Insulation | 1 |
| 16***52 | Insulation | 1 |
| 16***53 | Insulation | 1 |
149-1296 Liner Gp-Cab -Open Rops
| 11***25 | Screw-Flat Head; (M6x1x25-mm) | 6 |
| 12***81 | Bolt-Socket Head; (M10x1.5x55-mm) | 1 |
| 13***85 | Cover As | 1 |
138-0275 Liner Gp-Cab -Enclosed Rops
| 03***44 | Rivet (For Outside Japan); Rivet (For Outside Japan) | 4 |
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 11***19 | Bolt-Socket Head; (M4x0.7x25-mm) | 8 |
211-8470 Lines Gp-Air Conditioner
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 11***33 | Switch As-Pressure; (A/C) | 1 |
140-6429 Lines Gp-Cab Heater
| 14***29 | Lines Group-Cab Heater | 1 |
| 16***88 | Clip | 1 |
| 1L***79 | Elbow-Pipe; (3/8 In Pipe) | 1 |
148-7054 Mirror Gp
| 12***20 | Mirror As | 2 |
| 14***31 | Bracket | 2 |
| 14***32 | Bushing | 2 |
162-3873 Mirror Gp-Rear View
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 16***73 | Mirror Group-Rear View | 1 |
| 5P***15 | Washer-Mount 9w***75 Fuel Level Sensor | 2 |
144-9931 Module Gp-Warning Indicator
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 14***31 | Module Group-Warning Indicator; -Without Alarm | 1 |
| 14***34 | Gasket; (Indicator Module) | 1 |
144-9930 Module Gp-Warning Indicator -With Alarm, Function Lights
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***30 | Module Group-Warning Indicator; -With Alarm, Function Lights | 1 |
| 14***34 | Gasket; (Indicator Module) | 1 |
138-0197 Mounting Gp-Cab
| 13***97 | Mounting Group-Cab | 1 |
| 15***41 | Mount As | 2 |
| 3E***83 | Sleeve | 4 |
138-0208 Operator Ar-Enclosed Rops
| 13***81 | Wiring Group-Radio | 1 |
| 13***06 | Seat Group | 1 |
| 13***08 | Operator Ar-Enclosed Rops | 1 |
148-7060 Operator Ar-Enclosed Rops
| 13***08 | Operator Ar-Enclosed Rops | 1 |
| 14***60 | Operator Ar-Enclosed Rops | 1 |
| 17***46 | Operator Ar-Enclosed Rops | 1 |
138-0205 Operator Ar-Enclosed Rops
| 13***81 | Wiring Group-Radio | 1 |
| 13***05 | Operator Ar-Enclosed Rops | 1 |
| 13***06 | Seat Group | 1 |
155-3166 Operator Ar-Enclosed Rops
| 13***05 | Operator Ar-Enclosed Rops | 1 |
| 15***66 | Operator Ar-Enclosed Rops | 1 |
| 17***45 | Operator Ar-Enclosed Rops | 1 |
138-0201 Operator Ar-Enclosed Rops
| 13***81 | Wiring Group-Radio | 1 |
| 13***01 | Operator Ar-Enclosed Rops | 1 |
| 13***07 | Seat Group; -Vinyl | 1 |
178-7845 Operator Ar-Enclosed Rops
| 13***81 | Wiring Group-Radio | 1 |
| 13***06 | Seat Group | 1 |
| 13***30 | Control Group-Parking Brake | 1 |
178-7846 Operator Ar-Enclosed Rops
| 13***81 | Wiring Group-Radio | 1 |
| 13***06 | Seat Group | 1 |
| 13***30 | Control Group-Parking Brake | 1 |
178-7844 Operator Ar-Enclosed Rops -Standard
| 13***81 | Wiring Group-Radio | 1 |
| 13***07 | Seat Group; -Vinyl | 1 |
| 13***30 | Control Group-Parking Brake | 1 |
155-3164 Operator Ar-Enclosed Rops
| 13***01 | Operator Ar-Enclosed Rops | 1 |
| 15***64 | Operator Ar-Enclosed Rops | 1 |
| 17***44 | Operator Ar-Enclosed Rops; -Standard | 1 |
148-7055 Operator Ar-Open Rops
| 13***99 | Operator Ar-Open Rops | 1 |
| 14***55 | Operator Ar-Open Rops | 1 |
| 14***12 | Guard Group-Lines | 1 |
148-7059 Operator Ar-Open Rops
| 14***59 | Operator Ar-Open Rops | 1 |
| 14***62 | Operator Ar-Open Rops | 1 |
| 14***12 | Guard Group-Lines | 1 |
178-7847 Operator Ar-Open Rops -Standard
| 13***07 | Seat Group; -Vinyl | 1 |
| 13***30 | Control Group-Parking Brake | 1 |
| 13***32 | Control Group-Service Brake | 1 |
178-7848 Operator Ar-Open Rops
| 13***07 | Seat Group; -Vinyl | 1 |
| 13***30 | Control Group-Parking Brake | 1 |
| 13***32 | Control Group-Service Brake | 1 |
148-7062 Operator Ar-Open Rops
| 13***07 | Seat Group; -Vinyl | 1 |
| 13***30 | Control Group-Parking Brake | 1 |
| 13***32 | Control Group-Service Brake | 1 |
138-0199 Operator Ar-Open Rops
| 13***99 | Operator Ar-Open Rops | 1 |
| 13***07 | Seat Group; -Vinyl | 1 |
| 13***30 | Control Group-Parking Brake | 1 |
138-0210 Panel Gp-Instrument
| 10***16 | Plug | 1 |
| 10***56 | Plug; (Switch) | 6 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
230-6434 Panel Gp-Instrument
| 09***79 | Plug | 1 |
| 10***69 | Switch As-Rocker; (Starting Aid) | 1 |
| 10***56 | Plug; (Switch) | 5 |
138-0274 Panel Gp-Instrument
| 09***79 | Plug | 1 |
| 10***69 | Switch As-Rocker; (Starting Aid) | 1 |
| 10***56 | Plug; (Switch) | 5 |
138-0238 Pedal Gp-Governor
| 09***81 | Pin-Spring | 1 |
| 11***84 | Bumper | 1 |
| 13***23 | Pad | 1 |
149-0557 Roof Gp-Cab -Black
| 14***57 | Roof Group-Cab; -Black | 2 |
148-2734 Roof Gp-Cab -Yellow
| 14***34 | Roof Group-Cab; -Yellow | 1 |
| 21***87 | Bracket | 1 |
| 21***06 | Receiver-Refrigerant Dryer | 1 |
149-0559 Roof Gp-Cab -Yellow
| 13***86 | Roof As; (Black) | 1 |
| 14***59 | Roof Group-Cab; -Yellow | 1 |
| 17***93 | Spacer; (14x19.5x9-mm) | 4 |
148-2735 Roof Gp-Cab -Black
| 14***35 | Roof Group-Cab; -Black | 1 |
| 14***59 | Roof Group-Cab; -Yellow | 1 |
236-8015 Seat Belt Gp
| 22***36 | Seat Belt Group; -Retractable | 1 |
| 23***15 | Seat Belt Group | 1 |
| 8S***26 | Bolt; (7/16-20x3-In) | 1 |
187-0438 Seat Belt Gp -3-Inch
| 13***89 | Seat Belt Group; -2-Inch | 1 |
| 18***38 | Seat Belt Group; -3-Inch | 1 |
225-0430 Seat Belt Gp
| 22***30 | Seat Belt Group | 1 |
| 23***14 | Seat Belt Group | 1 |
109-1656 Seat Belt Gp -Retractable
| 10***56 | Seat Belt Group; -Retractable | 1 |
| 13***87 | Roof As; (Yellow) | 1 |
| 17***93 | Spacer; (14x19.5x9-mm) | 4 |
187-0437 Seat Belt Gp -2-Inch
| 18***37 | Seat Belt Group; -2-Inch | 1 |
| 1J***98 | Bolt; (7/16-20x3.5-In) | 2 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
225-0429 Seat Belt Gp
| 10***56 | Seat Belt Group; -Retractable | 1 |
| 22***29 | Seat Belt Group | 1 |
236-8014 Seat Belt Gp
| 23***14 | Seat Belt Group | 1 |
| 23***15 | Seat Belt Group | 1 |
138-0289 Seat Belt Gp -2-Inch
| 13***89 | Seat Belt Group; -2-Inch | 1 |
| 1J***98 | Bolt; (7/16-20x3.5-In) | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
138-0207 Seat Gp -Vinyl
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 4 |
| 13***07 | Seat Group; -Vinyl | 1 |
| 20***49 | Seat Group-Suspension | 1 |
138-0206 Seat Gp
| 13***06 | Seat Group | 1 |
| 22***37 | Seat Belt Group; -Retractable | 1 |
| 8S***26 | Bolt; (7/16-20x3-In) | 1 |
201-9849 Seat Gp-Suspension
| 11***52 | Kit-Frame As; (Seat)(Seat) | 1 |
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
143-8460 Seat Gp-Suspension -Vinyl
| 11***52 | Kit-Frame As; (Seat)(Seat) | 1 |
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
201-9850 Seat Gp-Suspension -Vinyl
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
| 15***56 | Kit-Armrest; (Seat)(Rh) | 1 |
143-8459 Seat Gp-Suspension -Cloth
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 4 |
| 14***59 | Seat Group-Suspension; -Cloth | 1 |
| 20***50 | Seat Group-Suspension; -Vinyl | 1 |
207-6865 Tank Gp-Window Washer
| 11***56 | Kit-Seat; (Back)(Seat Back) | 1 |
| 11***59 | Kit-Seat; (Bottom)(Seat Bottom) | 1 |
| 15***56 | Kit-Armrest; (Seat)(Rh) | 1 |
143-7421 Visor Gp-Cab
| 14***21 | Visor Group-Cab | 1 |
| 15***00 | Pump As | 2 |
| 20***59 | Cap | 1 |
146-9029 Window Gp-Rear
| 14***29 | Window Group-Rear | 1 |
| 6V***32 | Nut-Weld (M6x6 Thd); (M10x1.5) (Weld) | 2 |
| 9R***03 | Plate | 2 |
138-0251 Window Gp-Sliding -Rh
| 08***59 | Screw Self Tapper | 1 |
| 13***51 | Window Group-Sliding; -Rh | 1 |
| 14***87 | Cushion | 1 |
138-0250 Window Gp-Sliding -Lh
| 11***81 | Adhesive; (All Joints To Be Sealed) | 1 |
| 12***11 | Adhesive; (Urethane) | 1 |
| 13***50 | Window Group-Sliding; -Lh | 1 |
138-0296 Wiper & Washer Gp-Window
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***91 | Fuse; (15-Ampere) | 1 |
| 13***34 | Arm As-Window Wiper | 1 |
Power Train
142-1273 Valve Gp-Tire
| 14***73 | Valve Group-Tire | 1 |
| 14***78 | Valve Group | 1 |
186-6359 Axle & Mtg Gp-Drive -Front, With Counterweights
| 08***90 | Bolt; (M20x2.5x250-mm) | 8 |
| 13***83 | Plate | 2 |
| 14***31 | Axle Group-Fixed; -Front, Limited Slip Differential | 1 |
137-7736 Axle & Mtg Gp-Drive -Rear, Limited Slip Differential
| 13***36 | Axle & Mtg Group-Drive; -Rear, Limited Slip Differential | 1 |
| 15***28 | Axle Group-Oscillating; -Rear, Limited Slip Differential | 1 |
| 17***42 | Bolt-Socket Head; (M20x2.5-Thd) | 8 |
137-7733 Axle Gp-Fixed
| 08***90 | Bolt; (M20x2.5x250-mm) | 8 |
| 13***33 | Axle Group-Fixed | 1 |
| 13***83 | Plate | 2 |
140-6431 Axle Gp-Fixed -Front, Limited Slip Differential
| 09***33 | Ring; (Retaining) | 2 |
| 14***31 | Axle Group-Fixed; -Front, Limited Slip Differential | 1 |
| 15***28 | Pad-Brake; (2 Required) | 2 |
151-0928 Axle Gp-Oscillating -Rear, Limited Slip Differential
| 13***05 | Bolt; (M6x1x18-mm) | 6 |
| 15***28 | Axle Group-Oscillating; -Rear, Limited Slip Differential | 1 |
| 15***88 | Differential & Bevel Gear Group; -Limited Slip | 1 |
146-7647 Axle Gp-Oscillating -Rear, Standard Differential
| 14***47 | Axle Group-Oscillating; -Rear, Standard Differential | 1 |
| 15***89 | Planetary Group-Final Drive | 2 |
| 15***06 | Shaft As | 2 |
146-7650 Axle Gp-Oscillating -Rear, Standard Differential
| 14***47 | Axle Group-Oscillating; -Rear, Standard Differential | 1 |
| 14***50 | Axle Group-Oscillating; -Rear, Standard Differential | 1 |
| 17***42 | Bolt-Socket Head; (M20x2.5-Thd) | 8 |
196-9820 Chart-Wheel & Tire
| 14***99 | Rim As | 1 |
| 14***00 | Rim As | 1 |
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 1 |
143-7027 Counterweight Gp-Axle
| 14***27 | Counterweight Group-Axle | 1 |
| 14***46 | Counterweight; (30.6kg)(67.34 Lb) | 2 |
| 14***47 | Counterweight-Axle; (44.5kg)(97.9 Lb) | 2 |
152-1187 Differential & Bevel Gear Gp -Limited Slip
| 15***87 | Differential & Bevel Gear Group; -Limited Slip | 1 |
| 15***42 | Seal-Lip Type | 1 |
| 18***83 | Sealant-Gasket | 11 |
156-1576 Differential & Bevel Gear Gp -Standard
| 13***05 | Bolt; (M6x1x18-mm) | 6 |
| 15***76 | Differential & Bevel Gear Group; -Standard | 1 |
| 15***41 | Seal-Lip Type | 1 |
152-1188 Differential & Bevel Gear Gp -Limited Slip
| 13***05 | Bolt; (M6x1x18-mm) | 6 |
| 15***88 | Differential & Bevel Gear Group; -Limited Slip | 1 |
| 15***41 | Seal-Lip Type | 1 |
229-5628 Differential Gp
| 20***10 | Gear-Bevel; (12-Teeth) | 4 |
| 21***92 | Washer-Thrust; (22x42x2-mm Thk) | 4 |
| 21***93 | Shaft | 2 |
209-4336 Differential Gp-Limited Slip
| 20***77 | Pinion-Bevel | 2 |
| 20***10 | Gear-Bevel; (12-Teeth) | 4 |
| 20***36 | Differential Group-Limited Slip | 1 |
140-6432 Drive Gp-Transfer
| 09***58 | Bolt; (Socket Head) (M10x1.5x70mm) | 2 |
| 09***29 | Ring; (Retaining) | 1 |
| 14***32 | Drive Group-Transfer | 1 |
233-7790 Filter & Lines Gp-Power Train
| 13***47 | Filter Group-Oil; -Hydraulic, Power Train | 1 |
| 14***61 | Hose As | 1 |
| 14***42 | Connector Group | 1 |
137-7746 Filter & Lines Gp-Power Train
| 13***46 | Filter & Lines Group-Power Train | 1 |
| 13***47 | Filter Group-Oil; -Hydraulic, Power Train | 1 |
| 14***61 | Hose As | 2 |
137-7747 Filter Gp-Oil -Hydraulic, Power Train
| 13***47 | Filter Group-Oil; -Hydraulic, Power Train | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
229-5625 Gear Gp-Bevel & Pinion
| 20***97 | Kit-Shim | 1 |
| 21***69 | Shim; (Collapsible) | 1 |
| 21***57 | Washer; (40x50x2-mm Thk) | 2 |
229-5626 Gear Gp-Bevel & Pinion
| 20***97 | Kit-Shim | 1 |
| 21***69 | Shim; (Collapsible) | 1 |
| 21***57 | Washer; (40x50x2-mm Thk) | 2 |
137-7754 Lines Gp-Hydrostatic
| 11***49 | Fitting As; (Quick Disconnect) | 3 |
| 13***54 | Lines Group-Hydrostatic | 1 |
| 15***37 | Tube As | 1 |
203-4142 Motor Gp-Piston -Hydrostatic
| 09***74 | Bolt-Socket Head; (M12x1.75x65-mm) | 8 |
| 09***42 | Ring-Retaining | 1 |
| 10***16 | Seal-O-Ring | 2 |
137-7742 Motor Gp-Piston
| 09***74 | Bolt-Socket Head; (M12x1.75x65-mm) | 8 |
| 09***42 | Ring-Retaining | 1 |
| 10***16 | Seal-O-Ring | 2 |
138-2258 Mounting Gp-Hydrostatic Pump
| 11***56 | Flange; (314mm Od) | 1 |
| 13***58 | Mounting Group-Hydrostatic Pump | 1 |
| 14***66 | Hub As-Coupling | 1 |
137-7757 Mounting Gp-Motor -Hydrostatic
| 11***04 | Bolt-Socket Head; (M12x1.75x45-mm) | 4 |
| 13***57 | Mounting Group-Motor; -Hydrostatic | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
152-1189 Planetary Gp-Final Drive
| 09***24 | Ring-Retaining | 3 |
| 15***89 | Planetary Group-Final Drive | 1 |
| 15***09 | Stud | 8 |
136-9682 Power Train Ar
| 13***82 | Power Train Ar | 1 |
| 13***33 | Axle Group-Fixed | 1 |
| 13***39 | Pump Group-Piston | 1 |
152-1809 Pump Gp-Charge
| 15***09 | Pump Group-Charge | 1 |
| 17***64 | Seal-O-Ring | 2 |
| 6V***78 | Seal-O-Ring | 1 |
137-7739 Pump Gp-Piston
| 08***72 | Plug-O-Ring | 1 |
| 11***49 | Fitting As; (Quick Disconnect) | 4 |
| 11***34 | Valve Group-Relief; -Charge Pressure | 1 |
203-4139 Pump Gp-Piston -Hydrostatic
| 08***72 | Plug-O-Ring | 1 |
| 11***82 | Seal-O-Ring | 1 |
| 11***22 | Seal-Ring | 1 |
137-7748 Shaft Gp-Drive
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 05***13 | Spider & Bearing Group | 2 |
| 13***48 | Shaft Group-Drive | 1 |
191-0881 Tire & Rim Gp -Lh
| 08***06 | Tire (16/70-20); (10 Ply Bias) | 1 |
| 14***00 | Rim As | 1 |
| 14***73 | Valve Group-Tire | 1 |
183-6545 Tire & Rim Gp -Rh
| 14***73 | Valve Group-Tire | 1 |
| 14***35 | Tire(375/75 R20) | 1 |
| 18***24 | Rim As | 1 |
187-6073 Tire & Rim Gp
| 14***73 | Valve Group-Tire | 1 |
| 18***24 | Rim As | 1 |
| 18***73 | Tire & Rim Group | 1 |
191-0879 Tire & Rim Gp
| 14***00 | Rim As | 1 |
| 14***73 | Valve Group-Tire | 1 |
| 18***73 | Tire; (400/70r-20) | 1 |
143-7661 Tire & Rim Gp
| 14***98 | Tire(405/70r20) | 1 |
| 14***00 | Rim As | 1 |
| 14***73 | Valve Group-Tire | 1 |
183-6544 Tire & Rim Gp
| 14***97 | Tire (365/80r20) | 1 |
| 14***73 | Valve Group-Tire | 1 |
| 18***24 | Rim As | 1 |
183-6548 Tire & Rim Gp -Lh
| 14***73 | Valve Group-Tire | 1 |
| 14***35 | Tire(375/75 R20) | 1 |
| 18***24 | Rim As | 1 |
191-0880 Tire & Rim Gp -Rh
| 08***06 | Tire (16/70-20); (10 Ply Bias) | 1 |
| 14***00 | Rim As | 1 |
| 14***73 | Valve Group-Tire | 1 |
152-1210 Trunnion Gp-Axle
| 15***10 | Trunnion Group-Axle | 1 |
| 16***63 | Kit-Trunnion Bearing | 1 |
| 19***10 | Dowel | 2 |
152-1813 Valve Gp-Flushing
| 15***13 | Valve Group-Flushing | 1 |
152-1115 Valve Gp-Pump Control -Piston
| 10***98 | Bolt; (M4x65-mm Thk) | 8 |
| 15***15 | Valve Group-Pump Control; -Piston | 1 |
| 15***22 | Solenoid | 2 |
112-4634 Valve Gp-Relief -Piston Pump
| 11***34 | Valve Group-Relief; -Charge Pressure | 1 |
| 11***44 | Screw | 1 |
| 11***45 | Spring | 1 |
152-1810 Valve Gp-Relief -Combination-Hydrostatic Pump, Tow Release
| 15***10 | Valve Group-Relief; -Combination-Hydrostatic Pump, Tow Release | 1 |
| 16***13 | Ring-Backup | 1 |
| 6E***07 | Locknut-Sealing | 1 |
152-1811 Valve Gp-Relief -Pressure Override-Hydrostatic Pump
| 12***63 | Kit-Seal; (Contains Parts Marked J) | 1 |
| 15***11 | Valve Group-Relief; -Pressure Override-Hydrostatic Pump | 1 |
| 6E***07 | Locknut-Sealing | 1 |
177-7122 Valve Gp-Relief -Charge Pressure
| 11***45 | Spring | 1 |
| 11***47 | Shim; (0.3-mm Thk) | 1 |
| 16***15 | Retainer-Spring | 1 |
171-1457 Valve Gp-Rotary -Creeper Control
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 1 |
| 17***57 | Valve Group-Rotary; -Creeper Control | 1 |
| 17***58 | Lever | 1 |
152-1812 Valve Gp-Speed Sensing
| 12***76 | Seal-O-Ring | 1 |
| 15***12 | Valve Group-Speed Sensing | 1 |
223-9629 Wheel & Tire Gp
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 32 |
| 14***61 | Tire & Rim Group | 4 |
| 22***54 | Stop | 2 |
223-9628 Wheel & Tire Gp
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 32 |
| 18***73 | Tire & Rim Group | 4 |
| 22***54 | Stop | 2 |
223-9625 Wheel & Tire Gp
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 32 |
| 18***45 | Tire & Rim Group; -Rh | 2 |
| 18***48 | Tire & Rim Group; -Lh | 2 |
223-9624 Wheel & Tire Gp
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 32 |
| 18***44 | Tire & Rim Group | 4 |
| 22***54 | Stop | 2 |
223-9627 Wheel & Tire Gp
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 32 |
| 19***80 | Tire & Rim Group; -Rh | 2 |
| 19***81 | Tire & Rim Group; -Lh | 2 |
223-9626 Wheel & Tire Gp
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 32 |
| 19***79 | Tire & Rim Group | 4 |
| 22***54 | Stop | 2 |
Service Equipment And Supplies
148-0794 Film Gp
| 13***21 | Tooth-Uni | 1 |
| 13***22 | Tooth-Uni | 1 |
| 14***94 | Film Group | 1 |
183-5943 Film Gp
| 12***74 | Film-Identification; (Cat) | 1 |
| 13***30 | Film-Stripe; (Stripe)(218cm) | 0 |
| 14***67 | Film; (906) | 2 |
188-6173 Kit-Preventive Maintenance
| 13***00 | Element-Water Separator; (Primary) | 1 |
| 15***02 | Filter Group-Fuel; (Primary) | 1 |
| 16***73 | Bottle Group-Fluid Sampling | 2 |
173-5329 Kit-Preventive Maintenance
| 17***29 | Kit-Preventive Maintenance | 1 |
| 17***80 | Film-Instruction; (Control Switch Bucket Lock) | 1 |
| 17***81 | Film-Instruction; (Control Switch Bucket Lock) | 1 |
163-0223 Plate & Film Gp
| 12***44 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***23 | Plate & Film Group | 1 |
| 16***65 | Film-Warning; (Machine Operation) | 1 |
163-0226 Plate & Film Gp
| 13***88 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***26 | Plate & Film Group | 1 |
| 16***67 | Film-Warning; (Machine Operation) | 1 |
147-0972 Plate & Film Gp
| 14***35 | Film-Instruction; (Biodegradable Oil) | 1 |
| 14***72 | Plate & Film Group | 1 |
163-0219 Plate & Film Gp
| 12***40 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***19 | Plate & Film Group | 1 |
| 16***59 | Film-Warning; (Machine Operation) | 1 |
163-0231 Plate & Film Gp
| 10***17 | Plate-Warning; (No Clearance) | 2 |
| 13***48 | Film-Warning; (Radiator Pressure) | 1 |
| 16***31 | Plate & Film Group | 1 |
147-0975 Plate & Film Gp
| 12***42 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***75 | Plate & Film Group | 1 |
| 16***62 | Film-Warning; (Machine Operation) | 1 |
148-6416 Plate & Film Gp
| 12***39 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***16 | Plate & Film Group | 1 |
| 16***58 | Film-Warning | 1 |
163-0221 Plate & Film Gp
| 12***45 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***21 | Plate & Film Group | 1 |
| 16***64 | Film-Warning; (Machine Operation) | 1 |
163-0230 Plate & Film Gp
| 10***76 | Plate-Warning; (No Clearance) | 2 |
| 13***91 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***30 | Plate & Film Group | 1 |
146-8863 Plate & Film Gp
| 13***00 | Element-Water Separator; (Primary) | 1 |
| 14***63 | Plate & Film Group | 1 |
| 15***02 | Filter Group-Fuel; (Primary) | 1 |
148-6418 Plate & Film Gp
| 14***94 | Film Group | 1 |
| 14***18 | Plate & Film Group | 1 |
| 1P***07 | Film-Symbol; 2 On Bottom Of Upper Frame Below Engine. 2 On Front Of Upper Frame Above Boom Articulation | 2 |
163-0220 Plate & Film Gp
| 12***43 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***20 | Plate & Film Group | 1 |
| 16***60 | Film-Warning; (Machine Operation) | 1 |
163-0224 Plate & Film Gp
| 13***50 | Plate-Warning; (No Clearance, Czech) | 2 |
| 14***65 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***24 | Plate & Film Group | 1 |
147-0974 Plate & Film Gp
| 12***41 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***74 | Plate & Film Group | 1 |
| 16***61 | Film-Warning; (Machine Operation) | 1 |
163-0218 Plate & Film Gp
| 12***06 | Film-Warning; (Next To Radiator Fill Cap) | 1 |
| 14***15 | Plate-Rops/Fops | 1 |
| 16***18 | Plate & Film Group | 1 |
163-0228 Plate & Film Gp
| 13***49 | Film-Warning; (Radiator Pressure) | 1 |
| 16***28 | Plate & Film Group | 1 |
| 16***69 | Film-Warning; (Machine Operation) | 1 |
180-7949 Plate & Film Gp
| 12***46 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***63 | Film-Warning; (Machine Operation) | 1 |
| 18***48 | Film-Warning; (Cable Connection) | 1 |
163-0234 Plate & Film Gp
| 10***18 | Plate-Warning; (No Clearance) | 2 |
| 13***90 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***34 | Plate & Film Group | 1 |
143-7036 Tool Gp-Hand
| 14***36 | Tool Group-Hand | 1 |
| 16***28 | Plate-Warning; (No Clearance) | 2 |
| 16***32 | Film-Warning; (Pressurized Cooling Sys) | 1 |
Tools
Steering System
140-1611 Lines Gp-Steering
| 11***74 | Seal | 1 |
| 11***83 | Connector | 1 |
| 14***11 | Lines Group-Steering | 1 |
137-7786 Mounting Gp-Steering Cylinder
| 11***33 | Washer; (11x50x6-mm Thk) | 2 |
| 13***86 | Mounting Group-Steering Cylinder | 1 |
| 13***60 | Pin As | 2 |
166-3841 Pump Gp-Metering -Hmu
| 16***41 | Pump Group-Metering; -Hmu | 1 |
238-9489 Pump Gp-Metering -Hmu
| 23***89 | Pump Group-Metering; -Hmu | 1 |
206-6975 Steering Column Gp -Adjustable
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 20***75 | Steering Column Group; -Adjustable | 1 |
| 21***55 | Kit-Tilt Lever; (Steering Column) | 1 |
140-2838 Valve Gp-Priority -Steering
| 14***38 | Valve Group-Priority; -Steering | 1 |
| 1G***17 | Plug | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 3 |
Work Tools
150-8386 Bucket Ar-General Purpose
| 13***31 | Bucket As-General Purpose | 1 |
| 14***99 | Tooth Group-Uni | 7 |
| 15***86 | Bucket Ar-General Purpose | 1 |
150-8385 Bucket Ar-General Purpose
| 13***22 | Tooth Group-Long | 7 |
| 15***52 | Bucket As-General Purpose | 1 |
| 15***85 | Bucket Ar-General Purpose | 1 |
150-1570 Bucket Ar-General Purpose
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***91 | Fuse; (15-Ampere) | 1 |
186-0152 Bucket Ar-Grapple
| 16***30 | Cylinder Group-Hydraulic | 2 |
| 18***57 | Bucket Group-Grapple | 1 |
| 18***85 | Lines Group-Bucket; -Grapple | 1 |
184-3268 Bucket Ar-Grapple
| 13***31 | Bucket As-General Purpose | 1 |
| 14***03 | Edge Group-Cutting | 1 |
| 18***68 | Bucket Ar-Grapple | 1 |
152-2006 Bucket Ar-Light Material
| 14***03 | Edge Group-Cutting | 1 |
| 15***06 | Bucket Ar-Light Material | 1 |
| 18***68 | Bucket Ar-Grapple | 1 |
159-1585 Bucket Ar-Multipurpose
| 14***90 | Bucket Ar-Multipurpose; -High Dump | 1 |
| 14***99 | Tooth Group-Uni | 7 |
| 15***85 | Bucket Ar-Multipurpose | 1 |
200-4128 Bucket Ar-Multipurpose
| 14***03 | Edge Group-Cutting | 1 |
| 20***21 | Bucket Ar-Multipurpose | 1 |
| 20***28 | Bucket Ar-Multipurpose | 1 |
200-4127 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 7 |
| 20***21 | Bucket Ar-Multipurpose | 1 |
| 20***27 | Bucket Ar-Multipurpose | 1 |
200-4126 Bucket Ar-Multipurpose
| 14***95 | Lines Group-Bucket | 1 |
| 16***87 | Mounting Group-Cylinder; -Multipurpose Bucket | 1 |
| 16***30 | Cylinder Group-Hydraulic | 2 |
150-8387 Bucket Ar-Multipurpose
| 14***95 | Lines Group-Bucket | 1 |
| 15***79 | Bucket Group-Multipurpose | 1 |
| 15***87 | Bucket Ar-Multipurpose | 1 |
150-8388 Bucket Ar-Multipurpose
| 13***14 | Bucket Ar-Multipurpose | 1 |
| 14***99 | Tooth Group-Uni | 7 |
| 15***88 | Bucket Ar-Multipurpose | 1 |
152-1999 Bucket Ar-Multipurpose -High Dump
| 13***14 | Bucket Ar-Multipurpose | 1 |
| 14***03 | Edge Group-Cutting | 1 |
| 15***99 | Bucket Ar-Multipurpose; -High Dump | 1 |
200-4121 Bucket Ar-Multipurpose
| 14***95 | Lines Group-Bucket | 1 |
| 15***58 | Bucket Group-Multipurpose | 1 |
| 15***77 | Mounting Group-Cylinder; -Multipurpose Bucket | 1 |
152-5215 Bucket Ar-Multipurpose -High Dump
| 14***90 | Bucket Ar-Multipurpose; -High Dump | 1 |
| 14***03 | Edge Group-Cutting | 1 |
| 15***15 | Bucket Ar-Multipurpose; -High Dump | 1 |
150-6278 Bucket Ar-Multipurpose
| 13***22 | Tooth Group-Long | 7 |
| 15***78 | Bucket Ar-Multipurpose | 1 |
| 15***85 | Bucket Ar-Multipurpose | 1 |
138-8914 Bucket Ar-Multipurpose
| 13***14 | Bucket Ar-Multipurpose | 1 |
| 14***52 | Bucket As-Light Material | 1 |
| 15***90 | Edge Group-Cutting | 1 |
200-4129 Bucket Ar-Multipurpose
| 13***22 | Tooth Group-Long | 7 |
| 20***29 | Bucket Ar-Multipurpose | 2 |
200-4132 Bucket Ar-Multipurpose
| 14***95 | Lines Group-Bucket | 1 |
| 16***87 | Mounting Group-Cylinder; -Multipurpose Bucket | 1 |
| 16***30 | Cylinder Group-Hydraulic | 2 |
141-4990 Bucket Ar-Multipurpose -High Dump
| 13***13 | Bucket Group-Multipurpose | 1 |
| 14***90 | Bucket Ar-Multipurpose; -High Dump | 1 |
| 14***95 | Lines Group-Bucket | 1 |
150-1361 Bucket Ar-Multipurpose
| 13***38 | Cylinder Group-Hydraulic; -Multipurpose Bucket, Steering | 2 |
| 14***91 | Bucket Group-Multipurpose; -High Dump | 1 |
| 14***86 | Lines Group-Bucket | 1 |
152-2001 Bucket Ar-Side Dump
| 12***73 | Cylinder Group-Hydraulic; -Side Dump Bucket | 1 |
| 14***64 | Bucket Group-Side Dump | 1 |
| 14***88 | Lines Group-Bucket | 1 |
152-2002 Bucket Ar-Side Dump
| 14***99 | Tooth Group-Uni | 7 |
| 14***63 | Bucket Ar-Side Dump | 1 |
| 15***02 | Bucket Ar-Side Dump | 1 |
141-7263 Bucket Ar-Side Dump
| 14***63 | Bucket Ar-Side Dump | 1 |
| 14***95 | Lines Group-Bucket | 1 |
| 16***87 | Mounting Group-Cylinder; -Multipurpose Bucket | 1 |
152-2010 Bucket Ar-Stone Sieve
| 14***03 | Edge Group-Cutting | 1 |
| 14***63 | Bucket Ar-Side Dump | 1 |
| 15***10 | Bucket Ar-Stone Sieve | 1 |
152-2011 Bucket Ar-Stone Sieve
| 14***99 | Tooth Group-Uni | 7 |
| 14***85 | Bucket As-Stone Sieve | 1 |
| 15***11 | Bucket Ar-Stone Sieve | 1 |
138-8931 Bucket As-General Purpose
| 13***31 | Bucket As-General Purpose | 1 |
| 14***03 | Edge Group-Cutting | 1 |
| 14***85 | Bucket As-Stone Sieve | 1 |
150-1352 Bucket As-General Purpose
| 13***32 | Edge; (1880-mm) | 1 |
| 15***52 | Bucket As-General Purpose | 1 |
| 15***31 | Edge; (1860-mm) | 1 |
150-6270 Bucket As-General Purpose
| 13***00 | Adapter | 7 |
| 15***70 | Bucket As-General Purpose | 1 |
| 15***31 | Edge; (1860-mm) | 1 |
147-3152 Bucket As-Light Material
| 13***76 | Edge-Cutting; (2438mm) | 1 |
| 14***52 | Bucket As-Light Material | 1 |
| 15***49 | Edge; (1880-mm)(1880 mm) | 1 |
148-5385 Bucket As-Stone Sieve
| 14***85 | Bucket As-Stone Sieve | 1 |
| 15***51 | Edge; (1950-mm) | 1 |
| 15***97 | Edge; (1930-mm) | 1 |
184-3157 Bucket Gp-Grapple
| 16***35 | Edge; (1880-mm) | 1 |
| 17***05 | Film-Identification; (Bucket Level)(Bucket Level Indicator) | 2 |
| 18***57 | Bucket Group-Grapple | 1 |
200-4130 Bucket Gp-Multipurpose
| 10***87 | Film-Identification; (Bucket Level) | 1 |
| 13***24 | Edge-Cutting | 1 |
| 13***32 | Edge; (1880-mm) | 0 |
200-4122 Bucket Gp-Multipurpose
| 10***87 | Film-Identification; (Bucket Level) | 1 |
| 13***24 | Edge-Cutting | 1 |
| 13***27 | Edge-Cutting; (1890mm) | 1 |
150-6279 Bucket Gp-Multipurpose
| 10***87 | Film-Identification; (Bucket Level) | 1 |
| 13***24 | Edge-Cutting | 1 |
| 13***00 | Adapter | 7 |
150-1358 Bucket Gp-Multipurpose
| 11***33 | Washer; (11x50x6-mm Thk) | 4 |
| 13***32 | Edge; (1880-mm) | 1 |
| 14***31 | Carriage As | 1 |
200-4133 Bucket Gp-Multipurpose
| 10***87 | Film-Identification; (Bucket Level) | 1 |
| 13***24 | Edge-Cutting | 1 |
| 13***00 | Adapter | 5 |
138-8913 Bucket Gp-Multipurpose
| 13***13 | Bucket Group-Multipurpose | 1 |
| 13***32 | Edge; (1880-mm) | 1 |
| 15***31 | Edge; (1860-mm) | 1 |
141-4991 Bucket Gp-Multipurpose -High Dump
| 10***87 | Film-Identification; (Bucket Level) | 1 |
| 13***24 | Edge-Cutting | 1 |
| 13***32 | Edge; (1880-mm) | 1 |
141-7264 Bucket Gp-Side Dump
| 10***87 | Film-Identification; (Bucket Level) | 1 |
| 13***24 | Edge-Cutting | 1 |
| 13***76 | Edge-Cutting; (2438mm) | 1 |
195-1816 Carriage Gp-Fork
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***72 | Film-Identification; (Bucket Level)(Bucket Level Indicator) | 2 |
178-1169 Carriage Gp-Fork
| 13***75 | Pin As-Hitch | 1 |
| 13***32 | Edge; (1880-mm) | 1 |
| 14***74 | Carriage As | 1 |
138-1230 Coupler Gp-Quick
| 13***30 | Coupler Group-Quick | 1 |
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
190-4087 Coupler Gp-Quick
| 13***95 | Bracket | 2 |
| 14***54 | Washer | 2 |
| 14***77 | Plate-Instruction; (Quick Coupler, Read Omm) | 1 |
141-5003 Edge Gp-Cutting
| 09***17 | Shim; (0.25-mm Thk) | 2 |
| 09***18 | Shim; (0.5-mm Thk) | 2 |
| 09***19 | Shim; (1.6-mm Thk) | 2 |
154-7690 Edge Gp-Cutting
| 13***24 | Edge-Cutting | 1 |
| 15***90 | Edge Group-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 13 |
149-7665 Fork Gp-Pallet
| 13***19 | Edge-Cutting; (1970mm) | 1 |
| 14***65 | Fork Group-Pallet | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 13 |
161-2437 Fork Gp-Pallet
| 16***37 | Fork Group-Pallet | 1 |
| 16***80 | Positioner Group-Fork | 1 |
209-3477 Guard Gp-Bucket -Roading
| 16***80 | Positioner Group-Fork | 1 |
| 20***77 | Guard Group-Bucket; -Roading | 1 |
140-6542 Plate Ar-Bucket
| 14***42 | Plate Ar-Bucket | 1 |
| 14***77 | Plate-Instruction; (Quick Coupler, Read Omm) | 1 |
| 14***13 | Plate As | 1 |
140-6541 Plate Ar-Bucket
| 10***11 | Retainer As | 2 |
| 10***12 | Chain | 1 |
| 10***13 | Spring | 1 |
7t-8202 Tip-Long
| 14***77 | Plate-Instruction; (Quick Coupler, Read Omm) | 1 |
| 14***14 | Plate As | 1 |
| 15***01 | Pin As | 2 |
138-8922 Tooth Gp-Long
| 13***22 | Tooth Group-Long | 1 |
| 7T***46 | Tip-Long | 1 |
| 7T***47 | Tip-Long | 1 |
141-4999 Tooth Gp-Uni
| 14***99 | Tooth Group-Uni | 1 |
| 7T***02 | Tip-Long | 1 |
| 8E***08 | Pin-G.E.T. | 1 |
132-4720 Tooth-Uni-Single Strap
| 13***20 | Tooth-Uni-Single Strap | 2 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
| 8T***78 | Locknut; (M16x2-Thd) | 2 |
906 serial number reference
On the 906 family the PIN/serial plate sits on the front frame on the left (highway) side, ahead of the cab and near the left front tire; some generations repeat the stamped PIN on the frame itself, sometimes under paint. The plate shows the full Product Identification Number - on older-style tags it is an 8-character code (3-letter prefix plus 5-digit sequence, e.g. 6ZS00001), while current-style tags show the full 17-character PIN where the same 3-character code appears as the model-and-plant prefix block. Match the 3-character prefix to the build series to confirm which factory manual and engine apply: 6ZS/MER for the first-generation 906 (3034 and 3044C engines), SDH for the 906H (C3.4), JRF for the 906H2 (C3.3B DIT, Tier 4 Interim), and H66/K56 for the 906M (C3.3B DIT, Tier 4 Final).
| Prefix | Identifies | Notes |
|---|---|---|
| 6ZS | 906 compact wheel loader, early build | Runs 6ZS00001-UP. Fitted with the Cat 3034 diesel. Published specs for this range show a naturally aspirated tune; a turbocharged 3034 variant exists in the engine family but is not confirmed for this specific serial range. Earliest documented 906 build series, predates the H-series update. |
| MER | 906 compact wheel loader, later build | Runs MER00001-UP. Fitted with the Cat 3044C diesel. Same base 906 chassis generation as 6ZS but a later engine update. Sold alongside the 908 (same 3044C engine); the 902 sibling of that era used a smaller 3024 engine, same product family but not the same engine. |
| SDH | 906H compact wheel loader | Runs SDH00001-UP. Fitted with the Cat C3.4 diesel. Factory literature for the 906H/907H/908H group ties this engine to the range; both a naturally aspirated and a turbocharged direct-injection tune of the C3.4 are documented across markets/tiers, so confirm the exact tune with your dealer. H-series update with revised hydraulics and controls versus the first-generation 906. |
| JRF | 906H2 compact wheel loader | Runs JRF00001-UP. This is the dedicated prefix for the 906H2 (distinct from the base 906H), part of the 906H2/907H2/908H2 update. Fitted with the Cat C3.3B DIT diesel, meeting Tier 4 Interim/Stage IIIA emissions. |
| H66 | 906M compact wheel loader | Runs H6600001-UP. Fitted with the Cat C3.3B DIT diesel, Tier 4 Final/EU Stage IIIB emissions. M-series with optimized Z-bar linkage and closed-loop hydrostatic drive. |
| K56 | 906M compact wheel loader | Runs K5600001-UP. Same C3.3B DIT engine and factory manual coverage as H66. This is a separate, independently confirmed serial-prefix block for the 906M (a third block, Z66, also exists) rather than a different configuration. Exact basis for the prefix split (build run/plant) isn't detailed in public sources - confirm with dealer if it matters for parts fitment. |
Frequently asked questions
What engine does the Cat 906 wheel loader use?
It depends on which generation. The current production 906 (2022-present, Next Generation line) runs a Cat C2.8 engine at 55.7 kW (74 hp) gross. The 906M generation (roughly 2015-2022) used a Cat C3.3B DIT engine near 55 kW (74 hp). The original 906 (roughly 1998-2007) used a Cat 3044C engine rated near 51-56 kW (68-75 hp). Confirm the generation and serial number before ordering engine parts, since none of these three engines share components.
What is the operating weight of the Cat 906?
Operating weight varies by generation and configuration, roughly 4.9-5.9 t (10,900-13,000 lb) overall. The original 1998-2007 906 runs close to 4.9-5.0 t (10,900-11,300 lb). The 906M and current C2.8-powered 906 both run higher, generally 5.1-5.9 t (11,300-13,000 lb) depending on bucket, counterweight, and tire choice. Always check the specific configuration rather than assuming one figure across the board.
What replaced the Cat 906?
Nothing has replaced the current production 906 as of now; it remains an active Cat model in the Next Generation compact wheel loader line launched in 2022. What it did replace was the prior 906M generation, phased out when the C2.8-powered Next Generation 906 arrived. Caterpillar has reused the 906 nameplate more than once, so an older 906 or 906M in the used market is not the same machine as today's model, even though the name carries forward.
What 906 owners discuss
Why does a 906 sometimes run fine for a while after a hydraulic or drivetrain repair, then gradually lose forward drive and stall out?
Owners report this pattern most often right after work on the hydrostatic drive or a drive coupling: the loader moves normally for the first several hours of operation, then forward drive tapers off until the machine will no longer pull itself. The pattern points to a coupling or drive-motor spline that is wearing in rather than fully seated, or to air and debris left in the hydrostatic circuit from the repair itself. Check coupling engagement and flush the circuit before condemning the pump or drive motor. Have your dealer verify coupling engagement and hydrostatic charge pressure before the machine goes back into full duty.
Why does the transmission suddenly drop to neutral and stop responding to the forward/reverse switch, even though the display still shows a gear selected?
This comes up repeatedly on 906-family loaders and traces to two causes. A telematics or tracking module can briefly corrupt a message on the machine's datalink during power-up or a reboot, and the transmission control reads that corrupted message as a neutral command. Separately, a worn forward/reverse control box relay or switch can send the same intermittent signal on its own. Cold weather makes either fault harder to diagnose, since thickened hydraulic fluid slows valve response and can mimic the same symptom. Because this can drop drive while the machine is moving, have your dealer pull stored fault codes and verify the datalink and control-box wiring before returning it to work.
Is rear differential/pinion spline wear really a widespread issue on this loader family?
Yes, it comes up often enough among owners of this compact wheel loader family to count as a known wear pattern rather than a one-off. The pinion shaft in the rear axle differential can strip its splines, and more than one owner has had to repeat the repair before the fix held. Caterpillar has since released updated pinion, differential, and transfer-drive components addressing this exact failure, and they are described as fitting back to early production of the affected axle. If you are chasing repeat spline failures, ask your dealer whether the updated axle components are already fitted before rebuilding again.
What engine is actually in the 906, and does it change by series?
Yes, and it is easy to mix up because Caterpillar reused the 906 name across several distinct platforms over the years. The earliest 906 (roughly 1998-2004) used a naturally aspirated four-cylinder Cat 3024 diesel rated around 39 kW (52 hp). The 906H generation moved to a turbocharged Cat C3.4 four-cylinder rated near 52 kW (70 hp); owners of this series report misfire and blue-smoke complaints once the engine reaches operating temperature and higher rpm, usually traced to fuel injectors, turbo boost behavior, or a suction-side air leak in the fuel system rather than one single failed part. The 906M generation switched to the Cat C3.3B DIT rated about 55 kW (74 hp), a Tier 4 Final/Stage V engine with active DPF regeneration that runs in the background with no operator input under normal conditions. The current Next Generation 906 carries a Cat C2.8, stated by the factory to hold the same 55 kW (74 hp) gross rating as the C3.3B but with roughly 13% more torque for better roading speed and tractive effort. Confirm which engine is actually fitted from the engine/serial plate rather than from the model name alone, since "a 906" can mean any of these four engines depending on year.
Why do owners complain so much about tires and traction on the 906, especially for snow or plow work?
The 906 takes a tire size that is uncommon for its class, so aftermarket choice is thin and dedicated snow-pattern pneumatic tires in that size are hard to source. Owners running the loader for plowing or winter site work commonly add liquid ballast (calcium chloride, RV antifreeze, or washer fluid) to the tires, or run chains, to make up for the shortfall rather than wait on a snow tire that may not exist in the right size. Solid cushion tires are offered as an alternative for soft ground, mud, or quarry duty, trading some ride comfort for cut and wear resistance.
The aux hydraulics or joystick feel jumpy or unresponsive on my 906 -- is that normal?
It is a common first impression, especially coming from a smaller machine or a different brand. The loader has an implement modulation setting (Fine, Normal, Aggressive) that changes how progressively the joystick ramps up hydraulic flow, and a lot of "dead band then sudden lurch" complaints trace back to that setting rather than to a fault. If adjusting modulation does not help, the underlying joystick position sensors and proportional solenoids may be out of calibration; that calibration is performed with the dealer diagnostic tool and is not something an owner can trim from the cab. Have your dealer verify joystick and solenoid calibration if changing the modulation setting does not resolve the complaint.
What should I check first when looking at a used 906?
Owners and dealers point to the same short list. Start with the big-ticket systems: does the engine start and idle clean, does the transmission shift through all ranges without hunting or delay, and does the machine hold power under load in first gear against the brakes. Check tire and rim condition closely -- a single loader tire can run into the thousands to replace and a full set considerably more, so tread and rim damage change the deal math fast. Cycle the machine through a full articulation swing and feel for play in the center hinge; excess play there means degraded steering control, which matters most with a loaded bucket. Also cycle the differential lock if equipped, check for play in the bucket linkage pins, and ask for maintenance records rather than taking the hour meter at face value. Have your dealer verify articulation-joint and steering-cylinder condition before relying on the machine for loaded work.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 906 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.