Caterpillarwheel-type loadercompact wheel loader
Caterpillar 904B
Maintenance schedule, common problems & OEM parts breakdown
The Cat 904B is a compact wheel loader in Caterpillar's sub-1 cubic yard "900" series, sized to compete with skid steers on maneuverability while keeping wheel-loader stability and a full articulated frame. Every 904B is powered by a Mitsubishi (MHI) S4Q2-T turbocharged diesel, a 2.5-liter four-cylinder with mechanical fuel injection, rated near 41 kW gross / 38.8 kW net (55/52 hp) at 2400 rpm. Operating weight runs about 4,450 kg (9,810 lb), varying with bucket, tire, and counterweight choices. Built under PIN prefix B4L, production ran roughly 2005 to 2008. It sits alongside the 902, 903, 906, and 908 in Cat's compact wheel loader lineup, and was offered both as a standard loader with a VersaLink parallel-lift arm and as an Integrated Tool Carrier (IT) version with a cab-controlled QuickLock hydraulic coupler for fast tool changes. Drive is through a closed-loop, two-speed hydrostatic transmission rather than a torque-converter powershift.
Caterpillar carried the 904 nameplate forward after the B-series, but the follow-on 904H switched to a Cat-branded C2.2 engine rather than the Mitsubishi S4Q2-T, marking a real generation break rather than a running update — treat the two as separate parts and service families rather than a direct one-for-one succession. That split matters in the used and parts market today: buyers need to confirm the PIN prefix (B4L for this generation) before ordering engine, fuel system, or hydrostatic drive components, since the same 904 badge now spans two mechanically different machines. Because factory support has shifted toward the newer platforms, S4Q2-T engine parts and hydrostatic pump/motor components for the 904B increasingly move through rebuilders and secondary suppliers, making surviving units and their documented service history worth more to buyers who know the generation they're getting.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 904B specifications
Engine
| Engine model | Mitsubishi (MHI) S4Q2-T, 4-cylinder, turbocharged diesel |
| Gross power | 41 kW (55 hp) @ 2,400 rpm |
| Net power | 38.8 kW (52 hp) |
| Cylinders | 4, inline, turbocharged |
| Displacement | 2.5 L (2,505 cc), per base engine data — not separately confirmed on a loader-specific sheet |
| Bore x stroke | 88 mm x 103 mm (3.5 in x 4.06 in) |
| Emissions tier | Not documented in available spec sheets for this model |
Weights
| Operating weight | 4,450 kg (9,810 lb) |
| Shipping weight | Not published separately from operating weight |
| Ground pressure | Not published |
Dimensions
| Length, bucket on ground | 5.31-5.33 m (17.4-17.5 ft) |
| Transport length | Approx. 4.7 m (15.4 ft) per some spec listings — varies by source/configuration |
| Width over tires | 1.78-1.80 m (5.84-5.90 ft) |
| Height, top of cab | 2.39-2.41 m (7.83-7.90 ft) |
| Tread width | 1.33 m (52.3-52.4 in) |
| Hinge pin height, maximum | 3.12 m (10.25 ft) |
| Dump reach, maximum lift and dump | 0.66 m (2.16 ft) |
| Outside turning radius | 3.85 m (12.6 ft) |
| Wheelbase / ground clearance | Not reliably published — source figures for this exact model conflict internally and are omitted rather than risk publishing bad data; verify with dealer if needed |
Performance
| Transmission | Closed-loop, two-speed hydrostatic, single-path drive |
| Max travel speed, high range | 19.3-20 km/h (12 mph), forward and reverse |
| Max travel speed, low range | Approx. 6.4 km/h (4 mph), per one spec listing — not independently cross-verified |
| Breakout force | 3,630 kg (8,003 lb) |
| Static tipping load, straight | 2,979 kg (6,568 lb) |
| Hydraulic lift capacity, full height | 3,386 kg (7,464 lb) |
| Bucket capacity | 0.61 cu m (0.8 cu yd) |
| Gradeability | Not published |
Service capacities (summary)
| Fuel tank | 83.3 L (22 gal) |
| Hydraulic system | 41.6 L (11 gal) |
| Engine oil | 7.6 L (2 gal) |
| Cooling system | 7.6 L (2 gal) |
| Drive system (hydrostatic transmission) fluid | 7.6 L (2 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
904B fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with oil filter) | 7.5 L (2.0 US gal) | Cat DEO-ULS (API CK-4) or Cat DEO (API CI-4/CI-4 PLUS/CH-4) diesel engine oil. SAE 10W-30 covers roughly -18 to 40 C (0 to 104 F); SAE 15W-40 for warmer climates, -10 to 50 C (14 to 122 F); Cat DEO Cold Weather SAE 0W-40 for cold climates down to -40 C (-40 F). |
| Cooling system | 8 L (2.1 US gal) | Cat ELC (Extended Life Coolant), premixed, minimum 50% glycol, factory-fill antifreeze rated to -36 C (-33 F). Cat DEAC conventional fully-formulated antifreeze/coolant with SCA is the alternate. |
| Fuel tank | 83 L (21.9 US gal) | No. 2-D diesel fuel; use ultra-low sulfur diesel (ULSD) per current emissions requirements. |
| Hydraulic system and hydrostatic transmission (shared reservoir) | 43 L (11.4 US gal) | Cat HYDO Advanced 10, 20 or 30 preferred, selected by ambient temperature; Cat TDTO in matching viscosity is the alternate. Second choice: Cat MTO, Cat DEO, or Cat DEO-ULS. SAE 10W covers down to -20 C (-4 F); SAE 30 covers up to 50 C (122 F). |
| Final drives, differentials and transfer drive, front and rear axles | Not published in available factory literature for this compartment split on the 904 - verify against the dealer lubricant chart or OMM. | Cat Synthetic GO SAE 75W-140 for a wide ambient range, -30 to 45 C (-22 to 113 F); or Cat GO (Gear Oil) SAE 80W-90 (factory fill) / SAE 85W-140 for -20 to 40 C (-4 to 104 F); commercial gear oil meeting API GL-5 SAE 75W-90 is also accepted, -10 to 50 C (14 to 122 F). |
| Grease (chassis and pin lubrication points, spec only) | No reservoir capacity - service item only. | Cat Prime Application Grease NLGI 2 for medium loads, -20 to 40 C (-4 to 104 F); Cat Utility Grease NLGI 2 for low loads, -30 to 25 C (-22 to 77 F); Cat Extreme Application Grease NLGI 1 for a wide ambient range down to -35 C (-31 F) where extended service life is wanted. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 904B maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the 904B beyond the schedule
Predictive Maintenance & Fluid Analysis
Run oil sampling on both the engine and the hydrostatic drive — the 904B's small sump and hydraulic reservoir volumes mean contaminants and soot from the S4Q2-T turbo diesel concentrate faster than on larger loaders, so trends show up earlier than the calendar interval suggests. Track hydrostatic charge pressure and response time at startup; a slow creep down usually flags pump or motor wear before it becomes a stall-out failure in the field.
Corrective & Common Repairs
Typical wear points on the 904B are VersaLink loader linkage bushings and pins, QuickLock coupler wedge wear that shows up as tool rattle, and hydrostatic drive motor or pump shaft seals weeping fluid at the axle housings. On the S4Q2-T, watch for boost hose leaks at the turbo and mechanical injection pump linkage wear that shows up as rough idle or hard cold starts.
Overhaul & Rebuild Points
Engine overhaul work centers on the S4Q2-T's mechanical injection pump recalibration, turbocharger core replacement, and valve train wear given its NA-derived block running boosted. On the drivetrain, the hydrostatic pump and motor are the major rebuild items, along with front and rear axle planetaries once backlash or gear noise appears. Articulation and oscillation pivot bushings wear as a set and are worth replacing together rather than piecemeal.
Seasonal & Environment Servicing
Cold starts on the mechanical-injection S4Q2-T benefit from glow plug or ether-assist checks before winter and a switch to the correct viscosity engine and hydrostatic oil grade. Because the 904B's compact size puts it into tight demolition, landscaping, and yard work, the radiator core and turbo intake screen load up with debris faster than on a full-size loader and need more frequent clearing. Drain and stabilize fuel and coolant systems for any extended off-season storage.
904B common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 134-8726 | Filter Element As-Air | Air intake service | Check fitment → |
| 140-2334 | Filter Element As-Air | Air intake service | Check fitment → |
| 236-5081 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 263-5728 | Filter-Oil | Hydraulic service | Check fitment → |
| 5I-8670 | Filter-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
904B fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Engine Oil Pressure Lamp (red oil-can symbol) | Engine oil pressure has dropped below the safe minimum | Low engine oil level, a failing oil pump, or a plugged oil filter | Stop the engine immediately, check the oil level, and inspect for leaks before restarting |
| Hydraulic Oil Temperature Lamp/Gauge (thermometer symbol, red segment) | Hydraulic system oil temperature has gone above the normal operating range | Low hydraulic oil level, a clogged hydraulic oil cooler, or sustained high-load work in hot ambient conditions | Reduce load, let the engine idle to cool the system, and check hydraulic oil level and cooler fins for blockage |
| Air Cleaner Service Indicator (pop-up or dial gauge, yellow/red band) | Air filter restriction has reached the service limit | A dust- or debris-loaded primary air filter element | Inspect and clean or replace the air filter element, then reset the indicator |
| Fuel Level Gauge - Low Fuel | Fuel tank level has dropped into the reserve range | Normal fuel consumption nearing empty, or a fuel gauge sender fault | Refuel promptly to keep air out of the fuel system; bleed the fuel system if the engine loses power or stalls from running dry |
| Parking Brake Applied Indicator (P symbol, amber) | Parking brake is engaged | Operator-applied parking brake, or a brake circuit fault holding the brake engaged | Confirm the brake lever/switch position before attempting to drive; if the lamp stays on with the brake released, have the brake circuit inspected |
| Hydraulic Filter Bypass Indicator (filter symbol, amber) | The hydraulic return filter has gone into bypass from restriction | A loaded or clogged hydraulic filter element, or cold, thick oil at startup | Let the machine warm up; if the lamp stays on, replace the hydraulic filter element |
| Alternator/Battery Charge Lamp (battery symbol, red) | Charging system is not supplying adequate voltage to the battery | A worn or slipping alternator belt, a failed alternator, or a loose/corroded battery connection | Check belt tension and battery terminals; have the charging system tested if the lamp stays lit at running speed |
| Engine Coolant Temperature Lamp/Gauge (thermometer symbol, red) | Engine coolant temperature has gone above the normal operating range | Low coolant level, a clogged radiator, a failed thermostat, or a slipping or broken fan belt | Idle or stop the engine, let it cool, then check coolant level and radiator fins for blockage before continuing work |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
904B attachments & work tools
General purpose and light-material buckets
Standard loading/dirt bucket rated around 0.6 m3 (0.8 yd3) nominal capacity, width under 1.8 m (6 ft) to match the machine's compact footprint. A light-material bucket around 1.0 m3 is also offered for low-density loads where cubic capacity matters more than breakout force.
Multi-purpose (4-in-1) buckets
Split-clamshell bucket adds digging, dozing, clamping, grading and leveling in one tool. Opens and closes off the machine's auxiliary hydraulic circuit, no separate hydraulic kit required.
High-dump, side-dump and stone-sieve buckets
High-dump buckets add discharge height to clear truck sideboards and hoppers, useful for loading paper, pulp and similar bulk material. Side-dump buckets discharge to the side for tight-clearance work. Stone-sieve (skeleton) buckets screen rock and debris from soil - all carried in the same compact-wheel-loader bucket line as the general-purpose bucket.
Grapple buckets
Industrial grapple buckets are carried in Cat's compact-wheel-loader attachment line for handling loose, bulky or irregular material. Confirm exact fitment for the 904B generation with a dealer, since this attachment line has carried forward into later compact-wheel-loader models.
Pallet and utility forks
Frame-mounted forks for pallet and general material handling, sized to the compact wheel loader class with tine lengths roughly 0.9-1.4 m (36-54 in) across the lineup and typically Class II rated for this size class. Exact load-class rating for the 904B specifically is not documented in available sources - confirm rated capacity with a dealer before use.
Brooms and sweepers
Angle broom and pickup sweeper for yard and site cleanup, hydraulically driven off the standard auxiliary circuit. Broom widths across this loader class run roughly 1.5-2.5 m (59-98 in), varies by configuration.
Snow tools
Snow pusher with two independently hydraulically angled blades (up to five blade positions), plus snow blower and snow wing options for street, lot and sidewalk clearing. Pusher widths in this class span roughly 1.8-3.7 m (6-12 ft), varies by configuration; these run off the same auxiliary hydraulic circuit as the other hydromechanical tools.
Grading and dozer blades
Angle blade and dozer blade attachments for light grading and material spreading, widths in the compact wheel loader class running roughly 1.8-2.3 m (72-92 in).
Hydromechanical work tools (trenchers, tillers, cold planers, augers)
Higher-demand powered tools - trenchers, soil tillers, cold planers, augers, stump grinders - run off the auxiliary hydraulic circuit and are shared with the Cat skid steer work tool line. Larger units (wider cold planer drums, larger-diameter augers) need the high-flow hydraulic option rather than standard flow.
Quick coupler / mounting system
904B uses a skid steer loader-style quick coupler (mechanical pin-on or hydraulic QuickLock type), not a wheel-loader pin-and-cone coupler. This lets it run the same standard-flow Cat skid steer loader work tool lineup as Cat compact track and skid steer loaders. The hydraulic coupler uses an opposing-wedge design with check valves for a tight, impact-absorbing connection and allows in-cab tool changes.
Auxiliary hydraulics
Standard auxiliary (third-valve) flow is about 83 L/min (22 gpm) at a main relief pressure around 207 bar (3,002 psi), circuit fitted as standard and routed away from damage risk. Control is proportional electrohydraulic for fine metering on tools like brooms and blowers; a high-flow package is needed for the most demanding hydromechanical tools such as cold planers and large augers.
Loader linkage / carrier geometry
Z-bar loader linkage (not a parallel-lift arrangement) carries the work tool, giving strong breakout force for digging and bucket loading. This linkage style favors digging/loading tools over tasks needing maximum dump clearance or parallel tool orientation through the lift cycle.
Cab / operator protection
Operator station is ROPS/FOPS rated as standard for the compact wheel loader class. No attachment-specific guarding package (e.g. demolition-duty window guards) and no model-specific ride-control or extra-counterweight option is documented for the 904B - verify current availability with a dealer if needed.
All 904B assemblies by section
Every catalogued assembly group for the Caterpillar 904B. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
316-2175 Air Cleaner Gp
| 09***77 | Valve (Evacuation) | 1 |
| 09***28 | Indicator-Air Filter Change; (Air Filter Service) | 1 |
| 13***26 | Filter Element As-Air; (Primary) | 1 |
258-6237 Air Cleaner Gp
| 09***77 | Valve (Evacuation) | 1 |
| 09***28 | Indicator-Air Filter Change; (Air Filter Service) | 1 |
| 13***26 | Filter Element As-Air; (Primary) | 1 |
256-4628 Extension Gp-Exhaust -Enclosed Rops
| 25***28 | Extension Group-Exhaust; -Enclosed Rops | 1 |
| 27***46 | Support As | 1 |
| 27***65 | Pipe-Extension | 1 |
256-4627 Extension Gp-Exhaust -Open Rops
| 24***74 | Support As | 1 |
| 25***27 | Extension Group-Exhaust; -Open Rops | 1 |
| 26***38 | Pipe-Extension | 1 |
271-4264 Guard Gp-Exhaust
| 27***64 | Guard Group-Exhaust | 1 |
| 27***69 | Guard As | 1 |
| 8T***00 | Bolt (M8x1.25x16mm); (M8x1.25x16-mm) | 2 |
270-3836 Lines Gp-Air
| 18***36 | Clamp | 2 |
| 27***36 | Lines Group-Air | 1 |
| 27***67 | Hose | 1 |
241-9876 Lines Gp-Air
| 09***85 | Clamp; (Hose) | 3 |
| 13***98 | Clip | 1 |
| 24***76 | Lines Group-Air | 1 |
270-1858 Manifold Gp-Exhaust
| 25***26 | Stud | 4 |
| 27***58 | Manifold Group-Exhaust | 1 |
| 27***71 | Manifold-Exhaust | 1 |
270-1857 Manifold Gp-Inlet
| 09***00 | Washer; (1.5mm Thk) | 2 |
| 27***57 | Manifold Group-Inlet | 1 |
| 27***36 | Bolt; (M6x1x20-mm) | 1 |
241-9878 Muffler Gp
| 24***78 | Muffler Group | 1 |
| 26***26 | Clamp | 1 |
| 26***09 | Muffler As | 1 |
270-1860 Turbocharger Gp
| 09***72 | Nut | 8 |
| 27***60 | Turbocharger Group | 1 |
| 27***73 | Gasket | 1 |
270-6274 Turbocharger Gp
| 27***74 | Turbocharger Group | 1 |
| 27***76 | Shim | 1 |
| 27***79 | Ring-Snap | 1 |
Basic Engine
270-1845 Camshaft Gp
| 09***28 | Key | 1 |
| 23***85 | Plate-Thrust | 1 |
| 27***45 | Camshaft Group | 1 |
270-3832 Cover Gp-Cylinder Block
| 11***36 | Gasket | 1 |
| 27***32 | Cover Group-Cylinder Block | 1 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 2 |
270-1847 Cover Gp-Valve Mechanism
| 19***82 | Cap-Oil Filler; (Engine) | 1 |
| 23***38 | Clip | 1 |
| 27***47 | Cover Group-Valve Mechanism | 1 |
270-1844 Crankshaft Gp
| 08***13 | Pin | 2 |
| 09***27 | Nut | 1 |
| 09***28 | Key | 2 |
270-6162 Cylinder Block As
| 10***75 | Dowel | 2 |
| 10***69 | Jet | 4 |
| 19***20 | Plug | 1 |
270-1842 Cylinder Block Gp
| 27***42 | Cylinder Block Group | 1 |
| 27***62 | Cylinder Block As | 1 |
270-6188 Cylinder Head As
| 10***47 | Guide-Valve | 4 |
| 21***75 | Cap | 7 |
| 27***88 | Cylinder Head As | 1 |
270-1846 Cylinder Head Gp
| 27***46 | Cylinder Head Group | 1 |
| 27***83 | Bolt | 18 |
| 27***84 | Gasket | 1 |
241-9860 Drain Gp-Engine Oil
| 03***79 | Nipple; (Hose) | 1 |
| 09***88 | Clamp; (Hose) | 2 |
| 24***60 | Drain Group-Engine Oil | 1 |
270-1852 Flywheel Gp
| 09***01 | Washer; (3mm Thk) | 4 |
| 27***52 | Flywheel Group | 1 |
| 27***21 | Flywheel As | 1 |
270-1850 Gear Gp-Front
| 27***50 | Gear Group-Front | 1 |
| 27***15 | Gear-Camshaft | 1 |
| 27***16 | Gear-Injection Pump | 1 |
270-3826 Housing Gp-Flywheel
| 11***15 | Seal As-Oil | 1 |
| 14***17 | Bolt; (M10x1.25x25-mm) | 7 |
| 27***26 | Housing Group-Flywheel | 1 |
270-1849 Housing Gp-Front
| 13***50 | Gasket | 1 |
| 19***81 | Bolt; (M8x1.25x40-mm) | 1 |
| 23***88 | Cap-Filler; (Engine Oil) | 1 |
241-9873 Mounting Gp-Engine
| 20***38 | Mount | 8 |
| 24***73 | Mounting Group-Engine | 1 |
| 24***56 | Support As; (Rear, Rh) | 1 |
274-3264 Mounting Gp-Engine
| 20***38 | Mount | 8 |
| 24***56 | Support As; (Rear, Rh) | 1 |
| 24***57 | Support As; (Rear, Lh) | 1 |
270-1853 Pan Gp-Oil
| 10***67 | Plug | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
| 14***56 | Gasket | 1 |
270-1843 Piston & Rod Gp
| 12***55 | Bolt-Connecting Rod | 2 |
| 12***56 | Nut | 2 |
| 23***82 | Set-Bearing; (Standard)(Standard) | 1 |
270-1851 Pulley Gp-Crankshaft
| 27***51 | Pulley Group-Crankshaft | 1 |
| 27***19 | Plate | 1 |
| 27***20 | Pulley-Crankshaft | 1 |
270-1848 Valve Mechanism Gp
| 09***05 | Cap | 2 |
| 10***82 | Spring | 8 |
| 10***72 | Tappet | 8 |
Braking System
241-8757 Control Gp-Foot Brake
| 10***08 | Spring | 1 |
| 23***19 | Pad | 1 |
| 24***57 | Control Group-Foot Brake | 1 |
256-5099 Control Gp-Parking Brake
| 13***31 | Lever As | 1 |
| 1J***84 | Pin,Straight,Headed | 1 |
| 25***99 | Control Group-Parking Brake | 1 |
240-1372 Control Gp-Service Brake
| 1J***84 | Pin,Straight,Headed | 1 |
| 24***72 | Control Group-Service Brake | 1 |
| 24***51 | End-Yoke Rod | 1 |
Cooling System
270-3837 Cooler Gp-Engine Oil
| 09***61 | Clamp-Hose | 1 |
| 09***41 | Clamp, Hose; (Hose) | 3 |
| 19***43 | Plug | 1 |
270-1867 Fan Gp-Blower
| 23***07 | Pulley | 1 |
| 27***67 | Fan Group-Blower | 1 |
| 27***36 | Fan; (Blower, 6 Blades) | 1 |
270-6252 Pump Gp-Water
| 27***52 | Pump Group-Water | 1 |
| 27***53 | Cover | 1 |
| 27***55 | Gasket | 1 |
315-6459 Pump Gp-Water
| 09***75 | Bolt; (25-mm Long) | 2 |
| 19***56 | Bolt; (M8x1.25x45-mm) | 1 |
| 19***81 | Bolt; (M8x1.25x40-mm) | 3 |
270-1856 Pump Gp-Water
| 09***75 | Bolt; (25-mm Long) | 2 |
| 10***66 | Thermostat | 1 |
| 19***81 | Bolt; (M8x1.25x40-mm) | 3 |
241-9879 Radiator & Mounting Gp
| 08***07 | Tank As-Coolant; (Recovery) | 1 |
| 08***13 | Tank; (Radiator) | 1 |
| 08***14 | Cap As-Coolant Tank; (Recovery) | 1 |
322-5506 Radiator Gp
| 21***04 | Mount-Rubber | 2 |
| 24***86 | Cap-Radiator | 1 |
| 25***31 | Seal | 2 |
Electrical And Starting System
3e-7585 Lamp Gp-Head & Signal
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***49 | Lens As; (Headlight) | 1 |
270-1865 Alternator Gp-Charging
| 13***05 | Bolt; (22-mm Lg) | 1 |
| 19***11 | Plug | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
270-6310 Alternator Gp-Charging
| 11***58 | Pulley-Alternator | 1 |
| 11***59 | Frame As-Alternator | 1 |
| 11***60 | Rotor As-Alternator | 1 |
256-0394 Battery Gp -Heavy-Duty
| 25***94 | Battery Group; -Heavy-Duty | 1 |
| 9X***04 | Battery-Maintenance Free; (12 Volt)(900 Amp) | 1 |
240-1420 Battery Gp
| 24***20 | Battery Group | 1 |
| 3T***60 | Battery | 1 |
239-3858 Electrical Ar
| 23***58 | Electrical Ar | 1 |
| 24***95 | Wiring Group-Chassis | 1 |
| 24***97 | Wiring Group-Cab; -Dash | 1 |
270-1866 Glow Plug Gp
| 19***56 | Glow Plug | 4 |
| 27***66 | Glow Plug Group | 1 |
| 27***35 | Plate | 1 |
288-4496 Heater Gp-Jacket Water
| 27***87 | Gasket | 1 |
| 28***47 | Heater As | 1 |
| 28***96 | Heater Group-Jacket Water | 1 |
226-9934 Lamp Gp-Head & Signal -Lh
| 10***55 | Lamp Group-Head & Signal; -Lh | 1 |
| 22***34 | Lamp Group-Head & Signal; -Lh | 1 |
104-5255 Lamp Gp-Head & Signal -Lh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
3e-9382 Lamp Gp-Head & Signal -Rh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
226-9935 Lamp Gp-Head & Signal -Rh
| 22***35 | Lamp Group-Head & Signal; -Rh | 1 |
| 3E***82 | Lamp Group-Head & Signal; -Rh | 1 |
196-0030 Lamp Gp-Registration Plate
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 19***12 | Lamp; (12-Volt, 10-Watt) | 1 |
142-8634 Lamp Gp-Stop & Tail
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***34 | Lamp Group-Stop & Tail; -Stop, Tail | 1 |
128-6985 Lamp Gp-Warning Beacon
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 9R***42 | Plug As | 1 |
| 9R***58 | Cord As | 1 |
256-0396 Lighting Gp-Flood -Cab
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***84 | Switch As; (Floodlight) | 1 |
| 14***72 | Lamp; (12-Volt, 55-Watt) | 1 |
263-3018 Lighting Gp-Rear -License Plate
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***30 | Lamp Group-Registration Plate | 1 |
241-4499 Lighting Gp-Roading
| 14***34 | Lamp Group-Stop & Tail; -Stop, Tail | 2 |
| 22***34 | Lamp Group-Head & Signal; -Lh | 1 |
| 22***35 | Lamp Group-Head & Signal; -Rh | 1 |
270-3662 Lighting Gp-Roading -Without Turn Signals
| 14***34 | Lamp Group-Stop & Tail; -Stop, Tail | 2 |
| 24***72 | Bracket As; (Front, Rh) | 1 |
| 24***73 | Bracket As; (Front, Lh) | 1 |
240-7583 Lighting Gp-Warning Beacon
| 10***50 | Switch As-Rocker; (Warning Beacon, Power Recep)(Warning Beacon) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
270-1864 Starting Motor Gp-Electric
| 27***64 | Starting Motor Group-Electric | 1 |
| 27***95 | Stud | 2 |
| 27***96 | Starting Motor Group-Electric | 1 |
270-6296 Starting Motor Gp-Electric
| 12***38 | Shaft As-Clutch | 1 |
| 12***39 | Shaft As-Gear | 1 |
| 12***40 | Washer As | 1 |
269-6232 Warning Gp-Backup
| 25***32 | Bracket | 1 |
| 26***81 | Alarm | 1 |
| 26***32 | Warning Group-Backup | 1 |
240-7622 Wiring Gp-Cab
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***81 | Switch As-Rocker; (Front Window Wiper)(Front Wiper) | 1 |
| 13***82 | Switch As-Rocker; (Front Window Washer)(Washer) | 1 |
336-2760 Wiring Gp-Cab -Parking
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 14***69 | Terminal-Blade; (14-Ga To 20-Ga) | 4 |
250-7841 Wiring Gp-Cab -Enclosed Rops
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***65 | Kit-Connecting Plug; (8-Pin)(Electronic Control Channel) | 1 |
| 25***41 | Wiring Group-Cab; -Enclosed Rops | 1 |
312-7484 Wiring Gp-Cab -Enclosed
| 00***84 | Terminal-Blade; (16-Ga To 20-Ga) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
241-4497 Wiring Gp-Cab -Dash
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
241-4495 Wiring Gp-Chassis
| 03***97 | Boot | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***56 | Plug; (Switch) | 4 |
241-4496 Wiring Gp-Front
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
268-1174 Wiring Gp-Front
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
241-0331 Wiring Gp-Kickout & Positioner -Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
241-0332 Wiring Gp-Kickout & Positioner -Front
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
241-0328 Wiring Gp-Quick Coupler
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 21***17 | Switch As-Rocker; (Quick Coupler) | 1 |
| 24***28 | Wiring Group-Quick Coupler | 1 |
240-7584 Wiring Gp-Work Tool
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***88 | Switch As-Rocker; (Work Tool) | 1 |
Engine Arrangement
318-0159 Engine Ar-Primary
| 27***42 | Cylinder Block Group | 1 |
| 27***43 | Piston & Rod Group | 4 |
| 27***44 | Crankshaft Group | 1 |
240-1409 Engine Ar-Primary
| 24***09 | Engine Ar-Primary | 1 |
| 27***42 | Cylinder Block Group | 1 |
| 27***43 | Piston & Rod Group | 4 |
318-9963 Engine Ar-Primary
| 27***42 | Cylinder Block Group | 1 |
| 27***43 | Piston & Rod Group | 4 |
| 27***44 | Crankshaft Group | 1 |
318-0158 Engine Ar-Primary
| 27***42 | Cylinder Block Group | 1 |
| 27***43 | Piston & Rod Group | 4 |
| 27***44 | Crankshaft Group | 1 |
240-1410 Installation Ar-Engine
| 24***10 | Installation Ar-Engine | 1 |
| 24***59 | Filter & Lines Group-Engine Oil | 1 |
| 24***60 | Drain Group-Engine Oil | 1 |
Frame And Body
262-1656 Conversion Ar-Roading -Eame
| 24***20 | Mirror Group-Rear View; -Exterior | 1 |
| 24***99 | Lighting Group-Roading | 1 |
| 26***56 | Conversion Ar-Roading; -Eame | 1 |
262-1659 Conversion Ar-Roading -Italy
| 10***27 | Film-Identification; (20-Km/H)(20 Kph) | 3 |
| 10***50 | Switch As-Rocker; (Warning Beacon, Power Recep)(Warning Beacon) | 1 |
| 12***91 | Fastener-Loop; (12-cm Each) | 0 |
271-5943 Conversion Ar-Roading -Swiss
| 15***42 | Plate-Information; (Maximum Weight) | 1 |
| 27***43 | Conversion Ar-Roading; -Swiss | 1 |
| 9X***37 | Tack-Fastener | 4 |
262-1657 Conversion Ar-Roading -United Kingdom
| 24***20 | Mirror Group-Rear View; -Exterior | 1 |
| 26***57 | Conversion Ar-Roading; -United Kingdom | 1 |
| 27***62 | Lighting Group-Roading; -Without Turn Signals | 1 |
262-1655 Conversion Ar-Roading -Nacd
| 25***20 | Mirror Group | 1 |
| 26***55 | Conversion Ar-Roading; -Nacd | 1 |
| 26***32 | Warning Group-Backup | 1 |
262-1658 Conversion Ar-Roading -Germany
| 10***27 | Film-Identification; (20-Km/H)(20 Kph) | 3 |
| 11***34 | Film-Warning; (Steering) | 1 |
| 14***36 | Tool Group-Hand | 1 |
269-6229 Conversion Ar-Roading -Nacd, With Extended Mirror
| 24***20 | Mirror Group-Rear View; -Exterior | 1 |
| 25***20 | Mirror Group | 1 |
| 26***29 | Conversion Ar-Roading; -Nacd, With Extended Mirror | 1 |
240-0838 Counterweight Gp
| 24***38 | Counterweight Group | 1 |
| 24***28 | Counterweight As | 1 |
| 25***11 | Cap | 2 |
240-0840 Fender Gp-Front
| 24***40 | Fender Group-Front | 1 |
| 27***96 | Fender | 2 |
| 27***97 | Bracket As; (Rh) | 1 |
240-0833 Frame Gp-Rear
| 23***08 | Bearing | 2 |
| 24***33 | Frame Group-Rear | 1 |
| 24***00 | Frame As | 1 |
275-8559 Guard Gp-Bottom
| 27***59 | Guard Group-Bottom | 1 |
| 27***59 | Guard As | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 4 |
253-7604 Guard Gp-Cab
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
| 25***04 | Guard Group-Cab | 1 |
| 25***01 | Film-Information; (Rops, Fops, Read Omm) | 1 |
269-6121 Hardware Gp-Fender
| 26***21 | Hardware Group-Fender | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 6 |
| 8T***91 | Bolt-Plt; (M10 X 1.5 X 16) | 6 |
259-8014 Hitch Gp-Articulating
| 23***55 | Washer; (80x130x5-mm Thk) | 2 |
| 23***56 | Seal-Dust | 2 |
| 23***57 | Washer; (80x150x3.2-mm Thk) | 2 |
316-2656 Hood Gp
| 14***53 | Precleaner | 1 |
| 26***31 | Liner | 1 |
| 26***32 | Liner | 1 |
272-2135 Hood Gp
| 19***37 | Latch As | 1 |
| 19***47 | Latch | 1 |
| 19***48 | Grommet | 1 |
242-2968 Hood Gp
| 19***37 | Latch As | 1 |
| 19***47 | Latch | 1 |
| 19***48 | Grommet | 1 |
240-0842 Hood Gp-Engine
| 24***42 | Hood Group-Engine | 1 |
| 25***37 | Air Cleaner Group | 1 |
| 25***41 | Bracket As | 1 |
301-4317 Hood Gp-Engine
| 19***37 | Latch As | 1 |
| 25***08 | Bracket | 1 |
| 25***75 | Liner | 1 |
301-4319 Hood Gp-Engine
| 19***37 | Latch As | 1 |
| 19***47 | Latch | 1 |
| 19***48 | Grommet | 1 |
270-6731 Hood Gp-Engine
| 25***37 | Air Cleaner Group | 1 |
| 25***41 | Bracket As | 1 |
| 26***31 | Liner | 1 |
240-0845 Lines Gp-Grease
| 24***45 | Lines Group-Grease | 1 |
| 25***88 | Hose As | 1 |
| 25***89 | Hose As | 1 |
240-0837 Link Gp-Steering Frame Lock
| 24***37 | Link Group-Steering Frame Lock | 1 |
| 25***29 | Link As | 1 |
| 5P***43 | Seal 3.74 M(147.04 In.) | 0 |
269-5061 Pin Gp-Drawbar
| 25***69 | Pin-Drawbar | 1 |
| 26***61 | Pin Group-Drawbar | 1 |
| 8D***91 | Shim .20mm(.007in.)Thk | 1 |
240-0843 Step Gp
| 22***91 | Latch As | 1 |
| 24***43 | Step Group | 1 |
| 24***67 | Cover As | 1 |
Fuel System
240-1374 Control Gp-Governor
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 08***91 | Bolt; (M10x1.5x55-mm) | 1 |
| 09***44 | Pin-Cotter | 1 |
144-9962 Filter Gp-Water Sep & Fuel
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
241-9861 Lines Gp-Fuel Filter
| 14***62 | Filter Group-Water Sep & Fuel | 1 |
| 14***11 | Tube; (2-cm Each) | 0 |
| 16***14 | Tube As | 2 |
270-1862 Lines Gp-Fuel Injection
| 12***48 | Clamp | 3 |
| 12***49 | Clamp | 3 |
| 13***17 | Gasket | 4 |
270-1861 Pump Gp-Fuel Injection
| 19***22 | Bolt As; (M8x1.25x22-mm) | 1 |
| 23***35 | Stud | 3 |
| 24***02 | Gasket | 1 |
240-0841 Tank Gp-Fuel
| 14***67 | Clamp; (Hose) | 2 |
| 21***06 | Plug As; (Fuel Tank Drain) | 1 |
| 24***41 | Tank Group-Fuel | 1 |
Hydraulic System
4i-1536 Accumulator Gp-Hydraulic -Charged-Pilot Oil
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
199-7447 Accumulator Gp-Hydraulic -Uncharged-Pilot Oil
| 19***47 | Accumulator Group-Hydraulic; -Uncharged-Pilot Oil | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
087-4456 Accumulator Gp-Hydraulic -Charged-Pilot Oil
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 5I***16 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
087-4454 Accumulator Gp-Hydraulic -Charged-Pilot Oil
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
5i-8416 Accumulator Gp-Hydraulic -Charged-Pilot Oil
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 4I***67 | Cap | 1 |
| 5I***16 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
346-1343 Conversion Ar-Hydraulic -With Air Conditioner
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
346-5058 Conversion Ar-Hydraulic -Without Air Conditioner
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
231-5274 Cylinder & Mtg Gp-Angle Blade
| 23***66 | Pin As | 6 |
| 23***74 | Cylinder & Mtg Group-Angle Blade | 1 |
| 23***99 | Spacer; (25.4x28.4x13-mm Thk) | 12 |
230-5406 Cylinder & Mtg Gp-Angle Blade
| 06***43 | Ring-Snap | 1 |
| 21***55 | Pin As | 1 |
| 21***43 | Bushing | 1 |
293-6264 Cylinder Gp-Bucket
| 26***41 | Kit-Seal | 1 |
| 29***64 | Cylinder Group-Bucket | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
278-1975 Cylinder Gp-Grapple
| 25***97 | Bearing-Sleeve | 1 |
| 25***42 | Bearing-Sleeve | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
255-0943 Cylinder Gp-Grapple
| 25***97 | Bearing-Sleeve | 1 |
| 25***43 | Cylinder Group-Grapple | 1 |
| 28***91 | Kit-Seal | 1 |
156-5512 Cylinder Gp-Grapple
| 15***12 | Cylinder Group-Grapple | 1 |
| 16***13 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
274-9931 Cylinder Gp-Hydraulic -Angle Blade
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
| 27***31 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
274-9930 Cylinder Gp-Hydraulic -Angle Blade
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
| 27***30 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
225-9521 Cylinder Gp-Hydraulic -Angle Blade
| 17***58 | Kit-Seal | 1 |
| 21***55 | Rod End As | 1 |
| 22***21 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
301-4454 Cylinder Gp-Lift -Rh
| 22***45 | Bearing | 1 |
| 22***60 | Seal | 2 |
| 25***68 | Plate | 1 |
257-7565 Cylinder Gp-Lift -Rh
| 22***45 | Bearing | 1 |
| 22***60 | Seal | 2 |
| 25***68 | Plate | 1 |
301-4455 Cylinder Gp-Lift -Lh
| 22***45 | Bearing | 1 |
| 22***60 | Seal | 2 |
| 25***68 | Plate | 1 |
257-7566 Cylinder Gp-Lift -Lh
| 22***45 | Bearing | 1 |
| 22***60 | Seal | 2 |
| 25***68 | Plate | 1 |
185-1839 Cylinder Gp-Multipurpose Bukt
| 16***86 | Seal As-Buffer | 1 |
| 16***94 | Seal-U-Cup | 1 |
| 18***39 | Cylinder Group-Multipurpose Bukt | 1 |
240-1401 Cylinder Gp-Tilt
| 22***51 | Seal-Pin | 2 |
| 24***01 | Cylinder Group-Tilt | 1 |
| 24***66 | Bearing | 1 |
302-5556 Cylinder Gp-Tilt
| 22***51 | Seal-Pin | 2 |
| 24***66 | Bearing | 1 |
| 25***92 | Nut | 1 |
240-0851 Filter & Lines Gp-Hydraulic
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
| 14***39 | Connector As. | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
258-5104 Guide Gp-Lines -Quick Coupler
| 25***04 | Guide Group-Lines; -Quick Coupler | 1 |
| 26***29 | Plate As | 1 |
| 7X***03 | Washer-Hard; (9.9x35x2.5-mm Thk) | 1 |
272-6751 Housing Gp-Inlet -Control Valve
| 26***29 | Valve Group-Relief; (Main) | 1 |
| 27***51 | Housing Group-Inlet; -Control Valve | 1 |
| 27***52 | Housing | 1 |
239-3857 Hydraulic Ar
| 23***57 | Hydraulic Ar | 1 |
| 24***46 | Pump & Mtg Group-Impl & Steering | 1 |
| 24***47 | Pump & Mtg Group-Metering; -Hmu | 1 |
271-2731 Lines Gp-Auxiliary Hydraulic
| 15***17 | Cap-Dust | 1 |
| 15***18 | Cap-Dust | 1 |
| 17***11 | Spacer; (10.5x22x50.8-mm Thk) | 2 |
240-6543 Lines Gp-Bucket -With Work Tool Positioner
| 14***51 | Elbow Group | 1 |
| 14***68 | Elbow Group | 3 |
| 23***32 | Valve & Mtg Group-Solenoid; -12-Vdc-Hydraulic Lockout, Work Tool Psnr | 1 |
285-6113 Lines Gp-Bucket -Utility
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
259-6016 Lines Gp-Bucket -Multipurpose
| 14***85 | Hose As. | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 14***58 | Elbow As | 2 |
263-8696 Lines Gp-Bucket -Multipurpose
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 15***60 | Tee As | 2 |
| 15***17 | Cap-Dust | 1 |
177-1986 Lines Gp-Connecting
| 14***19 | Connector As | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
231-5273 Lines Gp-Connecting
| 14***15 | Connector As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 6 |
| 14***42 | Connector Group | 2 |
270-8128 Lines Gp-Coupler -Horizontal Pin
| 14***25 | Connector As. | 4 |
| 14***68 | Elbow Group | 1 |
| 14***45 | Fitting Group-Tee | 1 |
240-6548 Lines Gp-Coupler
| 14***25 | Connector As. | 4 |
| 14***68 | Elbow Group | 1 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 4 |
240-6544 Lines Gp-Front
| 13***76 | Connector | 2 |
| 14***15 | Connector As | 4 |
| 14***93 | Elbow Group | 1 |
303-4074 Lines Gp-Front -With Lowering Control Valve
| 10***37 | Grommet | 2 |
| 14***15 | Connector As | 4 |
| 14***25 | Connector As. | 1 |
240-7585 Lines Gp-Front -With Lowering Control Valve
| 10***37 | Grommet | 2 |
| 13***76 | Connector | 2 |
| 14***15 | Connector As | 4 |
303-4073 Lines Gp-Front -Standard
| 14***15 | Connector As | 4 |
| 14***93 | Elbow Group | 1 |
| 14***11 | Plug Group | 2 |
286-9250 Lines Gp-Grapple
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
286-9279 Lines Gp-Grapple
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
161-0187 Lines Gp-Grapple
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
271-8755 Lines Gp-Pilot -Work Tool
| 14***18 | Connector As | 1 |
| 14***74 | Elbow As | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
240-0850 Lines Gp-Pilot
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 11***45 | Guard | 1 |
| 14***25 | Connector | 1 |
231-5278 Manifold & Mtg Gp-Control -Angling Blade
| 23***78 | Manifold & Mtg Group-Control; -Angling Blade | 1 |
| 23***79 | Cover | 1 |
| 25***11 | Manifold Group-Control; -Angling Blade | 1 |
258-9011 Manifold Gp-Control -Angling Blade
| 18***51 | Washer-Hard; (5.3x8.8x2-mm Thk) | 8 |
| 19***08 | Seal-O-Ring | 1 |
| 21***14 | Seal-O-Ring | 1 |
240-2044 Manifold Gp-Control -Hydraulic Lockout
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
9r-4668 Mounting Gp-Cylinder
| 3B***17 | Cotter; (Pin) | 4 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 4 |
| 9R***68 | Mounting Group-Bucket Cylinder; -Multipurpose Bucket | 1 |
286-9248 Mounting Gp-Cylinder
| 15***41 | Pin | 2 |
| 15***42 | Pin | 2 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
165-8731 Mounting Gp-Cylinder
| 15***13 | Pin | 2 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
156-0891 Mounting Gp-Cylinder
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***13 | Plate | 1 |
| 15***41 | Pin | 2 |
240-6542 Positioner Ar-Work Tool -Bucket
| 23***47 | Control Group-Handle; -Direction, Third Function, Continuous Flow, Work Tool Positioner Switches | 1 |
| 24***42 | Positioner Ar-Work Tool; -Bucket | 1 |
| 24***43 | Lines Group-Bucket; -With Work Tool Positioner | 1 |
240-0846 Pump & Mtg Gp-Impl & Steering
| 24***46 | Pump & Mtg Group-Impl & Steering | 1 |
| 24***41 | Pump Group-Gear; -Implement, Steering | 1 |
| 6V***78 | Seal-O-Ring | 1 |
240-2041 Pump Gp-Gear -Implement, Steering
| 24***41 | Pump Group-Gear; -Implement, Steering | 1 |
| 25***48 | Gasket | 2 |
| 26***53 | Gasket | 2 |
240-0849 Tank & Mtg Gp-Hydraulic
| 24***49 | Tank & Mtg Group-Hydraulic | 1 |
| 24***40 | Tank Group-Hydraulic | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 5 |
240-2040 Tank Gp-Hydraulic
| 09***90 | Seal-O-Ring | 1 |
| 24***40 | Tank Group-Hydraulic | 1 |
| 25***39 | Strainer As-Oil; (Hydraulic Oil) | 1 |
240-1399 Valve & Mtg Gp-Main Control -3-Function
| 15***46 | Adapter Group | 1 |
| 24***99 | Valve & Mtg Group-Main Control; -3-Function | 1 |
| 27***16 | Valve Group-Main Control; -3-Function | 1 |
245-1910 Valve & Mtg Gp-Solenoid -Quick Coupler
| 10***08 | Kit-Seal; (Solenoid Valve, Quick Steer) | 1 |
| 23***26 | Coil As | 1 |
| 24***66 | Valve Group-Solenoid; (High Flow Boost) | 1 |
233-7132 Valve & Mtg Gp-Solenoid -Hydraulic Lockout
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 2 |
| 22***98 | Valve Group-Solenoid | 1 |
| 23***32 | Valve & Mtg Group-Solenoid; -12-Vdc-Hydraulic Lockout, Work Tool Psnr | 1 |
9t-7634 Valve Gp-Check -Load
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 10***91 | Seal Kit | 1 |
| 9T***34 | Valve Group-Check; -Makeup | 1 |
266-8806 Valve Gp-Control -Auxiliary
| 16***29 | Spring | 1 |
| 26***00 | Valve Group-Relief; (Auxiliary) | 2 |
| 26***06 | Valve Group-Control; -Auxiliary | 1 |
266-8798 Valve Gp-Control -Tilt
| 15***03 | Service Kit; (Consist Of Seal, Ring And Spring) | 1 |
| 16***29 | Spring | 1 |
| 26***98 | Valve Group-Control; -Tilt | 1 |
272-6760 Valve Gp-Control -Lift
| 16***29 | Spring | 1 |
| 26***99 | Plug As | 1 |
| 27***60 | Valve Group-Control; -Lift | 1 |
271-3316 Valve Gp-Main Control -3-Function
| 10***72 | Rod | 2 |
| 10***73 | Rod | 1 |
| 26***98 | Valve Group-Control; -Tilt | 1 |
266-6865 Valve Gp-Motor Control
| 09***33 | Ring-Retaining | 1 |
| 09***18 | Setscrew-Socket; (M4x0.7x6-mm) | 1 |
| 12***45 | Bushing-Control | 1 |
230-6453 Valve Gp-Pilot -Joystick, 3-Function
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***70 | Coil As | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
272-6771 Valve Gp-Pilot -Tilt
| 11***34 | Seat-Spring | 1 |
| 11***79 | Seal-Face | 1 |
| 27***53 | Bolt | 2 |
272-6773 Valve Gp-Relief -Line, Lift
| 11***79 | Seal-Face | 2 |
| 12***16 | Bolt-Shoulder | 1 |
| 12***19 | Seat-Spring | 1 |
272-6774 Valve Gp-Relief -Line, Lift
| 09***96 | Seal-O-Ring | 1 |
| 11***79 | Seal-Face | 2 |
| 12***55 | Spring | 1 |
272-6772 Valve Gp-Solenoid
| 11***34 | Seat-Spring | 1 |
| 11***79 | Seal-Face | 1 |
| 18***54 | Spring | 1 |
Implements
278-6939 Control Gp-Bucket
| 22***61 | Plate | 8 |
| 22***44 | Seal | 4 |
| 22***60 | Seal | 6 |
278-6940 Control Gp-Bucket
| 22***61 | Plate | 8 |
| 22***44 | Seal | 4 |
| 22***45 | Bearing | 2 |
241-4034 Lever Gp-Tilt
| 22***51 | Seal-Pin | 2 |
| 22***60 | Seal | 2 |
| 24***45 | Bearing | 2 |
173-7407 Stop Gp-Bucket
| 17***07 | Stop Group-Bucket; -Utility | 1 |
| 2S***08 | Washer-Retaining; (0.531x3.25x0.438-In Thk) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 1 |
Lubrication System
241-9859 Filter & Lines Gp-Engine Oil
| 09***32 | Washer; (15.8x22.5x2-mm Thk) | 8 |
| 12***64 | Filter-Engine Oil | 1 |
| 23***89 | Bracket | 1 |
270-1855 Lines Gp-Turbocharger Oil
| 09***00 | Washer; (1.5mm Thk) | 1 |
| 09***41 | Clamp, Hose; (Hose) | 2 |
| 19***33 | Bolt | 2 |
270-1854 Pump Gp-Engine Oil
| 10***25 | Valve As; (Oil Bypass)(Engine) | 1 |
| 23***96 | Gasket | 1 |
| 27***54 | Pump Group-Engine Oil | 1 |
270-6235 Pump Gp-Engine Oil
| 27***35 | Pump Group-Engine Oil | 1 |
| 27***36 | Bolt; (M6x1x20-mm) | 4 |
| 27***37 | Gasket | 1 |
Machine Arrangement
239-3854 Chassis Ar
| 23***54 | Chassis Ar | 1 |
| 24***33 | Frame Group-Rear | 1 |
| 24***34 | Frame As | 1 |
239-3851 Common Ar
| 23***51 | Common Ar | 1 |
| 23***54 | Chassis Ar | 1 |
| 23***56 | Power Train Ar | 1 |
Operator Station
186-6190 Accumulator Gp-Refrigerant -With Desiccant
| 18***90 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
176-3900 Accumulator Gp-Refrigerant -With Desiccant
| 17***00 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
241-5642 Air Conditioner & Mounting Gp
| 24***04 | Air Conditioner Group | 1 |
| 24***42 | Air Conditioner & Mounting Group | 1 |
| 31***64 | Insulation | 1 |
312-7465 Air Conditioner Ar
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 24***39 | Lines Group-Cab Heater | 1 |
| 24***41 | Lines Group-Air Conditioner | 1 |
240-1418 Air Conditioner Ar
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 24***18 | Air Conditioner Ar | 1 |
| 24***39 | Lines Group-Cab Heater | 1 |
241-5004 Air Conditioner Gp
| 20***98 | Knob-Control; (Temperature Select) | 1 |
| 23***84 | Orifice As-Air Conditioner | 1 |
| 23***62 | Cable-Control | 1 |
312-7557 Air Conditioner Gp
| 31***57 | Air Conditioner Group | 1 |
269-9503 Cab Ar-Enclosed Rops -With Sliding Window
| 25***71 | Cab Group-Enclosed Rops | 1 |
| 25***41 | Wiring Group-Cab; -Enclosed Rops | 1 |
| 25***25 | Wiper Group-Window | 1 |
311-4205 Cab Ar-Enclosed Rops -With Sliding Windows
| 25***41 | Wiring Group-Cab; -Enclosed Rops | 1 |
| 25***25 | Wiper Group-Window | 1 |
| 26***04 | Door Group-Cab; -Lh | 1 |
301-4348 Cab Ar-Enclosed Rops -Fixed Window
| 25***79 | Door Group-Cab; -Lh | 1 |
| 25***41 | Wiring Group-Cab; -Enclosed Rops | 1 |
| 25***24 | Liner Group-Cab; -Open Rops | 1 |
301-4346 Cab Ar-Enclosed Rops -With Sliding Window
| 25***41 | Wiring Group-Cab; -Enclosed Rops | 1 |
| 25***25 | Wiper Group-Window | 1 |
| 26***04 | Door Group-Cab; -Lh | 1 |
325-5603 Cab Ar-Enclosed Rops -With Sliding Window
| 25***25 | Wiper Group-Window | 1 |
| 26***04 | Door Group-Cab; -Lh | 1 |
| 27***92 | Liner Group-Cab; -Enclosed Rops | 1 |
238-1421 Cab Ar-Enclosed Rops -Fixed Windows
| 23***21 | Cab Ar-Enclosed Rops; -Fixed Windows | 1 |
| 25***71 | Cab Group-Enclosed Rops | 1 |
| 25***79 | Door Group-Cab; -Lh | 1 |
325-5602 Cab Gp
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
| 11***04 | Plate Assem.; (Lh) | 1 |
| 17***93 | Bumper; (Rubber) | 1 |
301-4347 Cab Gp
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
| 11***04 | Plate Assem.; (Lh) | 1 |
| 17***93 | Bumper; (Rubber) | 1 |
311-4206 Cab Gp
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
| 11***04 | Plate Assem.; (Lh) | 1 |
| 17***93 | Bumper; (Rubber) | 1 |
250-7771 Cab Gp-Enclosed Rops
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
| 11***04 | Plate Assem.; (Lh) | 1 |
| 11***87 | Knob; (Cover Fasteners) | 4 |
301-4344 Canopy Ar-Open Rops
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 25***24 | Liner Group-Cab; -Open Rops | 1 |
| 26***73 | Harness As-Cab | 1 |
238-1422 Canopy Ar-Open Rops
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 23***22 | Canopy Ar-Open Rops | 1 |
| 25***75 | Canopy Group-Open Rops | 1 |
301-4345 Canopy Gp-Open Rops
| 22***91 | Latch As | 1 |
| 22***21 | Cam | 1 |
| 25***76 | Canopy As-Open Rops | 1 |
250-7775 Canopy Gp-Open Rops
| 22***21 | Cam | 1 |
| 25***75 | Canopy Group-Open Rops | 1 |
| 25***76 | Canopy As-Open Rops | 1 |
218-4994 Compressor Gp-Refrigerant
| 21***94 | Compressor Group-Refrigerant | 1 |
| 22***96 | Seal-O-Ring | 2 |
241-5981 Compressor Gp-Refrigerant
| 21***94 | Compressor Group-Refrigerant | 1 |
| 24***81 | Compressor Group-Refrigerant | 1 |
| 24***99 | Pulley | 1 |
315-6460 Condenser & Mtg Gp-Refrigerant
| 24***79 | Condenser & Mtg Group-Refrigerant | 1 |
| 24***25 | Guard-Lower | 1 |
| 28***06 | Guard As | 1 |
243-4012 Condenser & Mtg Gp-Refrigerant
| 24***79 | Condenser & Mtg Group-Refrigerant | 1 |
| 24***20 | Support As; (Lh) | 1 |
| 24***22 | Support As; (Rh) | 1 |
241-5979 Condenser & Mtg Gp-Refrigerant
| 24***79 | Condenser & Mtg Group-Refrigerant | 1 |
| 31***73 | Seal | 2 |
| 31***74 | Screw | 4 |
240-1419 Control Gp-Creeper
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 1 |
| 11***45 | Knob-Control | 1 |
| 12***72 | Tee | 1 |
230-6446 Control Gp-Handle -Direction, Third Function, Proportional Flow Switches
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***53 | Grommet | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
230-6447 Control Gp-Handle -Direction, Third Function, Continuous Flow, Work Tool Positioner Switches
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***53 | Grommet | 1 |
240-6541 Control Gp-Handle
| 23***46 | Control Group-Handle; -Direction, Third Function, Proportional Flow Switches | 1 |
| 24***41 | Control Group-Handle | 1 |
312-7500 Control Gp-Pilot Operated Hyd
| 03***32 | Strap--Harness Assembly To Compressor | 1 |
| 23***53 | Valve Group-Pilot; -Joystick, 3-Function | 1 |
| 24***60 | Bracket As | 1 |
240-0856 Control Gp-Pilot Operated Hyd -Joystick, 3-Function
| 03***32 | Strap--Harness Assembly To Compressor | 1 |
| 23***53 | Valve Group-Pilot; -Joystick, 3-Function | 1 |
| 24***56 | Control Group-Pilot Operated Hydraulic; -Joystick, 3-Function | 1 |
281-8094 Control Gp-Pilot Operated Hyd
| 03***32 | Strap--Harness Assembly To Compressor | 1 |
| 23***53 | Valve Group-Pilot; -Joystick, 3-Function | 1 |
| 24***60 | Bracket As | 1 |
296-4480 Control Gp-Steering
| 09***18 | Washer; (14.2x24.5x3.5-mm Thk) | 1 |
| 25***35 | Sheet-Rubber | 1 |
| 26***15 | Nut; (M14x1.5 Thd) | 1 |
242-4904 Control Gp-Steering
| 09***18 | Washer; (14.2x24.5x3.5-mm Thk) | 1 |
| 22***50 | Steering Wheel Group | 1 |
| 24***04 | Control Group-Steering | 1 |
256-0393 Cover Gp-Cab
| 25***96 | Bracket | 1 |
| 25***93 | Cover Group-Cab | 1 |
| 5C***12 | Nut (M4x0.7 Thd) | 2 |
250-7779 Door Gp-Cab -Lh
| 16***57 | Latch As-Door; (Hold Open)(Lh) | 1 |
| 25***79 | Door Group-Cab; -Lh | 1 |
| 25***56 | Lock As | 1 |
269-9504 Door Gp-Cab -Lh
| 16***57 | Latch As-Door; (Hold Open)(Lh) | 1 |
| 25***56 | Lock As | 1 |
| 26***90 | Handle As-Lh | 1 |
312-7504 Duct & Filter Gp-Cab Air
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 2 |
| 14***67 | Clamp-Hose | 4 |
| 1P***22 | Grommet | 1 |
312-7506 Duct Gp-Cab Air -Heater, Air Conditioner
| 20***40 | Screw; (M6x1x12-mm) | 4 |
| 23***60 | Regulator As-Water Temperature; (Thermostat) | 1 |
| 30***43 | Cover As | 1 |
241-5982 Duct Gp-Cab Air
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 14***67 | Clamp-Hose | 6 |
| 1P***22 | Grommet | 1 |
289-5781 Guard Gp-Refrigerant Condenser
| 28***06 | Guard As | 1 |
| 28***81 | Guard Group-Refrigerant Condenser | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 2 |
241-5640 Heater & Mtg Gp-Cab
| 24***03 | Heater Group-Cab | 1 |
| 24***40 | Heater & Mtg Group-Cab | 1 |
| 31***64 | Insulation | 1 |
240-1417 Heater Ar-Cab
| 24***36 | Cover Group-Front | 1 |
| 24***17 | Heater Ar-Cab | 1 |
| 24***39 | Lines Group-Cab Heater | 1 |
312-7503 Heater Ar-Cab
| 24***36 | Cover Group-Front | 1 |
| 24***39 | Lines Group-Cab Heater | 1 |
| 24***40 | Heater & Mtg Group-Cab | 1 |
241-5003 Heater Gp-Cab
| 20***98 | Knob-Control; (Temperature Select) | 1 |
| 23***62 | Cable-Control | 1 |
| 23***64 | Valve-Water | 1 |
256-6435 Installation Gp-Radio
| 25***35 | Installation Group-Radio | 1 |
| 25***35 | Cover As | 2 |
| 25***52 | Antenna As | 1 |
243-1346 Liner Gp-Cab -Enclosed Rops
| 15***81 | Armrest As | 1 |
| 24***45 | Cover | 1 |
| 24***46 | Liner Group-Cab; -Enclosed Rops | 1 |
240-7621 Liner Gp-Cab -Open Rops
| 15***81 | Armrest As | 1 |
| 24***21 | Liner Group-Cab; -Open Rops | 1 |
| 24***41 | Box As | 1 |
312-7482 Liner Gp-Cab -Enclosed
| 15***81 | Armrest As | 1 |
| 24***45 | Cover | 1 |
| 26***45 | Cover As | 1 |
256-5124 Liner Gp-Cab -Open Rops
| 25***24 | Liner Group-Cab; -Open Rops | 1 |
| 26***33 | Button | 9 |
| 27***27 | Cover | 1 |
274-6592 Liner Gp-Cab -Enclosed Rops
| 26***33 | Button | 8 |
| 27***28 | Cover | 1 |
| 27***92 | Liner Group-Cab; -Enclosed Rops | 1 |
241-5641 Lines Gp-Air Conditioner
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***33 | Switch As-Pressure; (A/C) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
241-5639 Lines Gp-Cab Heater
| 09***88 | Clamp; (Hose) | 4 |
| 12***14 | Elbow | 1 |
| 19***66 | Washer-Hard; (11x25x10-mm Thk) | 1 |
240-5707 Literature Gp
| 09***45 | Cable; (Lanyard) | 1 |
| 24***07 | Literature Group | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 2 |
256-3520 Mirror Gp
| 25***20 | Mirror Group | 1 |
| 9R***60 | Mirror As | 1 |
240-7620 Mirror Gp-Rear View -Exterior
| 12***20 | Mirror As | 2 |
| 24***20 | Mirror Group-Rear View; -Exterior | 1 |
| 24***85 | Stay As | 2 |
223-6539 Module Gp-Warning Indicator
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 9 |
| 22***39 | Module Group-Warning Indicator; -With Alarm | 1 |
240-8147 Mounting Gp-Cab -Enclosed Rops
| 24***47 | Mounting Group-Cab; -Enclosed Rops | 1 |
| 26***41 | Insulation | 1 |
| 26***49 | Insulation | 1 |
240-8146 Mounting Gp-Cab -Open Rops
| 24***46 | Mounting Group-Cab; -Open Rops | 1 |
| 26***41 | Insulation | 1 |
| 26***49 | Insulation | 1 |
239-3859 Operator Ar
| 23***59 | Operator Ar | 1 |
| 24***56 | Control Group-Pilot Operated Hydraulic; -Joystick, 3-Function | 1 |
| 24***72 | Control Group-Service Brake | 1 |
240-1416 Operator Ar -Enclosed Rops
| 23***21 | Cab Ar-Enclosed Rops; -Fixed Windows | 1 |
| 24***56 | Control Group-Pilot Operated Hydraulic; -Joystick, 3-Function | 1 |
| 24***16 | Operator Ar; -Enclosed Rops | 1 |
313-1207 Operator Ar-Enclosed Rops -With Sliding Windows
| 24***22 | Wiring Group-Cab | 1 |
| 24***23 | Tank Group-Window Washer | 1 |
| 24***47 | Mounting Group-Cab; -Enclosed Rops | 1 |
269-6118 Operator Ar-Enclosed Rops -Without Sliding Window
| 24***56 | Control Group-Pilot Operated Hydraulic; -Joystick, 3-Function | 1 |
| 24***22 | Wiring Group-Cab | 1 |
| 24***23 | Tank Group-Window Washer | 1 |
240-1415 Operator Ar-Open Rops
| 24***36 | Cover Group-Front | 1 |
| 24***15 | Operator Ar-Open Rops | 1 |
| 24***21 | Liner Group-Cab; -Open Rops | 1 |
240-1385 Panel Gp-Instrument
| 24***85 | Panel Group-Instrument | 1 |
| 24***71 | Cover As | 1 |
| 24***44 | Cover As; (Lh) | 1 |
311-4217 Platform Gp-Cab
| 25***93 | Fender As; (Lh) | 1 |
| 25***20 | Fender As; (Rh) | 1 |
| 25***60 | Plate | 1 |
240-1412 Seat & Mounting Gp
| 24***12 | Seat & Mounting Group | 1 |
| 24***30 | Support As-Seat | 1 |
| 24***45 | Plate As | 1 |
269-6109 Seat & Mounting Gp
| 24***30 | Support As-Seat | 1 |
| 24***45 | Plate As | 1 |
| 25***46 | Seat Group; -Vinyl-Static | 1 |
240-1413 Seat & Mounting Gp -Suspension, 2-Inch Belt
| 24***13 | Seat & Mounting Group; -Suspension, 2-Inch Belt | 1 |
| 25***47 | Seat Group-Suspension; -Vinyl | 1 |
| 26***76 | Insulation | 1 |
312-7471 Seat & Mounting Gp -Suspension, 3-Inch Belt
| 25***47 | Seat Group-Suspension; -Vinyl | 1 |
| 26***76 | Insulation | 1 |
| 26***35 | Insulation | 1 |
269-6110 Seat & Mounting Gp -Suspension, 3-Inch Belt
| 25***47 | Seat Group-Suspension; -Vinyl | 1 |
| 26***76 | Insulation | 1 |
| 26***33 | Insulation | 1 |
312-7473 Seat & Mounting Gp -Suspension, 3-Inch Belt
| 26***76 | Insulation | 1 |
| 26***35 | Insulation | 1 |
| 26***36 | Insulation | 1 |
269-6111 Seat & Mounting Gp -Suspension, 3-Inch Belt
| 26***76 | Insulation | 1 |
| 26***33 | Insulation | 1 |
| 26***34 | Insulation | 1 |
269-4205 Seat & Mounting Gp -Suspension, 2-Inch Belt
| 26***76 | Insulation | 1 |
| 26***33 | Insulation | 1 |
| 26***34 | Insulation | 1 |
312-7469 Seat & Mounting Gp -Static, 3-Inch Belt
| 24***45 | Plate As | 1 |
| 25***46 | Seat Group; -Vinyl-Static | 1 |
| 26***76 | Insulation | 1 |
312-7470 Seat & Mounting Gp -Suspension, 2-Inch Belt
| 25***47 | Seat Group-Suspension; -Vinyl | 1 |
| 26***76 | Insulation | 1 |
| 26***35 | Insulation | 1 |
312-7468 Seat & Mounting Gp -Static, 2-Inch Belt
| 24***45 | Plate As | 1 |
| 25***46 | Seat Group; -Vinyl-Static | 1 |
| 26***76 | Insulation | 1 |
312-7472 Seat & Mounting Gp -Suspension, 2-Inch Belt
| 26***76 | Insulation | 1 |
| 26***35 | Insulation | 1 |
| 26***36 | Insulation | 1 |
220-8082 Seat Belt Gp -2-Inch
| 0T***44 | Bolt (1.25" Long) | 2 |
| 22***82 | Seat Belt Group; -Retractable, 2-In | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 2 |
276-6019 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 27***19 | Seat Belt Group | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
276-7275 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 1 |
| 27***75 | Seat Belt Group | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 1 |
220-8083 Seat Belt Gp -3-Inch
| 0T***44 | Bolt (1.25" Long) | 2 |
| 22***83 | Seat Belt Group; -Retractable, 3-In | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 2 |
276-6018 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 1 |
| 27***18 | Seat Belt Group | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 1 |
276-7276 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 27***76 | Seat Belt Group; -Suspension | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 2 |
220-8080 Seat Belt Gp -2-Inch
| 0T***44 | Bolt (1.25" Long) | 1 |
| 22***80 | Seat Belt Group; -Retractable, 2-In | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 1 |
220-8081 Seat Belt Gp -3-Inch
| 0T***44 | Bolt (1.25" Long) | 1 |
| 22***81 | Seat Belt Group; -Retractable, 3-In | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 1 |
253-4946 Seat Gp -Vinyl
| 25***46 | Seat Group; -Vinyl-Static | 1 |
| 25***63 | Handle | 1 |
| 6W***09 | Holder | 1 |
253-4947 Seat Gp-Suspension -Vinyl
| 15***11 | Kit-Spring; (Adjustable Seat) | 1 |
| 15***15 | Kit-Damper; (Adjustable Seat) | 1 |
| 17***43 | Kit-Cushion | 1 |
270-8033 Seat Gp-Suspension -Cloth
| 15***11 | Kit-Spring; (Adjustable Seat) | 1 |
| 15***13 | Kit-Cushion; (Adjustable Seat) | 1 |
| 15***15 | Kit-Damper; (Adjustable Seat) | 1 |
240-7623 Tank Gp-Window Washer
| 14***95 | Hose; (650-cm Each) | 0 |
| 20***65 | Tank Group-Window Washer | 1 |
| 24***23 | Tank Group-Window Washer | 1 |
207-6865 Tank Gp-Window Washer
| 15***00 | Pump As | 2 |
| 20***59 | Cap | 1 |
| 20***65 | Tank Group-Window Washer | 1 |
241-8297 Visor Gp-Cab
| 24***97 | Visor Group-Cab | 1 |
250-7780 Window Gp-Door
| 25***80 | Window Group-Door | 1 |
| 27***24 | Hinge | 2 |
| 27***25 | Retainer | 6 |
256-5125 Wiper Gp-Window
| 25***94 | Blade As-Wiper; (Front) | 1 |
| 25***25 | Wiper Group-Window | 1 |
| 26***85 | Motor-Window Wiper; (Front) | 1 |
Power Train
266-6889 Actuator Gp-Pump
| 10***32 | Spacer; (9.2x15.95x5.77-mm Thk) | 2 |
| 15***44 | Cover | 1 |
| 15***45 | Cover | 1 |
269-6107 Axle Ar-Fixed & Oscillating -Standard Differential
| 24***92 | Axle Group-Fixed; -Front, Standard Differential | 1 |
| 24***94 | Axle Group-Oscillating; -Rear, Standard Differential | 1 |
| 26***07 | Axle Ar-Fixed & Oscillating; -Standard Differential | 1 |
269-6108 Axle Ar-Fixed & Oscillating -Limited Slip Differential
| 24***93 | Axle Group-Fixed; -Front, Limited Slip Differential | 1 |
| 24***95 | Axle Group-Oscillating; -Rear, Limited Slip Differential | 1 |
| 26***08 | Axle Ar-Fixed & Oscillating; -Limited Slip Differential | 1 |
306-3954 Axle Ar-Fixed & Oscillating
| 24***93 | Axle Group-Fixed; -Front, Limited Slip Differential | 1 |
| 24***94 | Axle Group-Oscillating; -Rear, Standard Differential | 1 |
| 30***54 | Axle Ar-Fixed & Oscillating | 1 |
240-1392 Axle Gp-Fixed -Front, Standard Differential
| 24***92 | Axle Group-Fixed; -Front, Standard Differential | 1 |
| 24***50 | Bolt | 12 |
| 24***51 | Bolt | 6 |
240-1393 Axle Gp-Fixed -Front, Limited Slip Differential
| 24***93 | Axle Group-Fixed; -Front, Limited Slip Differential | 1 |
| 24***50 | Bolt | 12 |
| 24***51 | Bolt | 6 |
240-1395 Axle Gp-Oscillating -Rear, Limited Slip Differential
| 24***95 | Axle Group-Oscillating; -Rear, Limited Slip Differential | 1 |
| 24***50 | Bolt | 12 |
| 24***51 | Bolt | 6 |
240-1394 Axle Gp-Oscillating -Rear, Standard Differential
| 24***94 | Axle Group-Oscillating; -Rear, Standard Differential | 1 |
| 24***50 | Bolt | 12 |
| 24***51 | Bolt | 6 |
240-0836 Cover Gp-Front
| 24***36 | Cover Group-Front | 1 |
| 24***22 | Cover | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
258-0197 Cover Gp-Motor
| 25***97 | Cover Group-Motor | 1 |
| 25***99 | Seat | 1 |
| 25***00 | Pin-Center | 1 |
240-1398 Drive Gp-Hydrostatic
| 24***98 | Drive Group-Hydrostatic | 1 |
| 24***93 | Gear Group-Output Transfer | 1 |
| 24***35 | Plate | 1 |
240-0852 Filter & Lines Gp-Hydrostatic
| 14***18 | Connector As | 1 |
| 14***25 | Connector As. | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
240-6293 Gear Gp-Output Transfer
| 24***93 | Gear Group-Output Transfer | 1 |
| 24***53 | Bolt | 5 |
| 24***55 | Bolt | 4 |
266-6864 Head Gp-Motor -Piston
| 13***15 | Plug | 1 |
| 25***97 | Cover Group-Motor | 1 |
| 25***05 | Head | 1 |
266-6905 Head Gp-Pump -Piston
| 08***72 | Plug-O-Ring | 3 |
| 12***94 | Plug; (Break Off) | 3 |
| 12***76 | Bushing | 1 |
243-4011 Motor & Mtg Gp-Hydrostatic
| 09***19 | Seal-O-Ring (Id=124.40mm) | 1 |
| 20***33 | Bolt-12 Point Head; (M12x1.75x40-mm) | 4 |
| 24***62 | Motor Group-Piston; -Hydrostatic | 1 |
243-3962 Motor Gp-Piston -Hydrostatic
| 24***62 | Motor Group-Piston; -Hydrostatic | 1 |
| 25***45 | Rotating Group-Motor; -Hydrostatic | 1 |
| 25***19 | Housing | 1 |
240-1396 Mounting Gp-Axle
| 23***61 | Mounting Group-Drive Axle; (Fixed) | 1 |
| 24***96 | Mounting Group-Axle | 1 |
| 24***31 | Mounting Group-Axle; -Oscillating | 1 |
240-8131 Mounting Gp-Axle -Oscillating
| 11***80 | Bolt; (M12x1.25x30-mm) | 3 |
| 23***93 | Cover | 1 |
| 23***94 | Washer-Thrust | 2 |
239-3856 Power Train Ar
| 22***78 | Shaft Group-Drive | 1 |
| 23***56 | Power Train Ar | 1 |
| 24***96 | Mounting Group-Axle | 1 |
240-1404 Pump & Mtg Gp-Hydrostatic
| 12***47 | Bolt; (M10x1.25x40-mm) | 12 |
| 14***62 | Flange-Nylon | 1 |
| 24***04 | Pump & Mtg Group-Hydrostatic | 1 |
240-2042 Pump Gp-Piston -Hydrostatic
| 11***26 | Pin | 1 |
| 11***27 | Screw-Lock | 1 |
| 11***17 | Seal-O-Ring | 1 |
258-0145 Rotating Gp-Motor -Hydrostatic
| 13***60 | Plate | 1 |
| 25***45 | Rotating Group-Motor; -Hydrostatic | 1 |
| 25***46 | Barrel | 1 |
266-6874 Rotating Gp-Pump -Hydrostatic
| 08***98 | Bearing | 1 |
| 10***65 | Circlip | 1 |
| 12***40 | Bearing-Roller | 1 |
227-3678 Shaft Gp-Drive
| 11***80 | Bolt; (M12x1.25x30-mm) | 8 |
| 22***78 | Shaft Group-Drive | 1 |
| 22***05 | Universal Joint Group | 1 |
229-3207 Slip Joint Gp
| 22***07 | Slip Joint Group | 1 |
| 25***24 | Universal Joint | 2 |
| 25***25 | Yoke | 2 |
268-3015 Tire & Rim Ar
| 24***37 | Mounting Group-Rim | 1 |
| 26***15 | Tire & Rim Ar | 1 |
| 26***75 | Tire & Rim Group; -Rh | 2 |
240-1421 Tire & Rim Ar
| 24***21 | Tire & Rim Ar | 1 |
| 24***37 | Mounting Group-Rim | 1 |
| 25***06 | Wheel & Tire Group; -Rh | 2 |
298-4912 Tire & Rim Ar
| 09***41 | Washer; (Hard) (19x34x3 mm Thk) | 24 |
| 27***51 | Nut; (M18x1.5-Thd) | 24 |
| 29***49 | Mounting Group-Rim | 1 |
268-3016 Tire & Rim Ar
| 24***37 | Mounting Group-Rim | 1 |
| 26***16 | Tire & Rim Ar | 1 |
| 26***77 | Tire & Rim Group | 4 |
305-2477 Tire & Rim Ar
| 24***37 | Mounting Group-Rim | 1 |
| 30***77 | Tire & Rim Ar | 1 |
| 30***78 | Tire & Rim Group; -Lh | 2 |
305-2478 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 19***40 | Tire; (33/15.5-16.5) | 1 |
| 30***76 | Rim As | 1 |
269-5075 Tire & Rim Gp -Rh
| 15***82 | Tire; (12-R16.5) | 1 |
| 24***77 | Valve | 1 |
| 26***26 | Rim As | 1 |
305-2481 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 19***40 | Tire; (33/15.5-16.5) | 1 |
| 30***76 | Rim As | 1 |
269-5076 Tire & Rim Gp -Lh
| 15***82 | Tire; (12-R16.5) | 1 |
| 24***77 | Valve | 1 |
| 26***26 | Rim As | 1 |
269-5077 Tire & Rim Gp
| 22***69 | Tire; (12-R16.5) | 1 |
| 24***77 | Valve | 1 |
| 26***26 | Rim As | 1 |
298-4909 Tire Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 19***40 | Tire; (33/15.5-16.5) | 1 |
| 29***09 | Tire Group; -Rh | 1 |
298-4913 Tire Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 19***40 | Tire; (33/15.5-16.5) | 1 |
| 29***13 | Tire Group; -Lh | 1 |
266-6913 Valve Gp-Pump Control -Piston
| 12***94 | Plug; (Break Off) | 3 |
| 26***13 | Valve Group-Pump Control; -Piston | 1 |
| 26***15 | Retainer-Spring | 2 |
154-9445 Valve Gp-Relief -Pressure Override
| 12***63 | Kit-Seal; (Contains Parts Marked J) | 1 |
| 15***45 | Valve Group-Relief; -Pressure Override-Hydrostatic Pump | 1 |
| 20***55 | Nut-Sealing; (M8x1-Thd) | 1 |
167-1514 Valve Gp-Relief
| 11***17 | Seal-O-Ring | 1 |
| 16***14 | Valve Group-Relief; -Piston Pump-Hydrostatic Pump | 1 |
| 16***13 | Ring-Backup | 1 |
112-4634 Valve Gp-Relief -Charge Pressure
| 11***34 | Valve Group-Relief; -Charge Pressure | 1 |
| 11***44 | Screw | 1 |
| 11***45 | Spring | 1 |
177-7122 Valve Gp-Relief
| 11***45 | Spring | 1 |
| 11***47 | Shim; (0.3-mm Thk) | 1 |
| 16***15 | Retainer-Spring | 1 |
239-9425 Valve Gp-Rotary -Creeper Control
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 1 |
| 13***53 | Lever | 1 |
| 23***25 | Valve Group-Rotary; -Creeper Control | 1 |
258-6207 Wheel & Tire Gp -Lh
| 24***34 | Tire; (12-R16.5) | 1 |
| 24***77 | Valve | 1 |
| 25***07 | Wheel & Tire Group; -Lh | 1 |
310-9404 Wheel & Tire Gp
| 30***50 | Tire-Solid; (33x6x11)(Rh) | 2 |
| 30***51 | Tire-Solid; (33x6x11)(Lh) | 2 |
| 31***04 | Wheel & Tire Group | 1 |
309-2641 Wheel & Tire Gp
| 24***37 | Mounting Group-Rim | 1 |
| 30***50 | Tire-Solid; (33x6x11)(Rh) | 2 |
| 30***51 | Tire-Solid; (33x6x11)(Lh) | 2 |
258-6206 Wheel & Tire Gp -Rh
| 24***34 | Tire; (12-R16.5) | 1 |
| 24***77 | Valve | 1 |
| 25***06 | Wheel & Tire Group; -Rh | 1 |
Service Equipment And Supplies
257-9739 Film Gp -International
| 22***72 | Film; (Warning) (High Pressure Cyl) (Hydraulic Service Center) | 1 |
| 22***46 | Film-Warning; (No Ether Spray/Air Intk, Intl) | 1 |
| 22***22 | Film; (Warning) (Seat Belt) (Cab Post) | 1 |
305-0495 Film Gp
| 25***36 | Film-Identification; (Caterpillar) | 1 |
| 30***95 | Film Group | 1 |
| 30***96 | Film-Identification; (Cat 904b, Rh) | 1 |
259-2605 Film Gp
| 13***30 | Film-Stripe; (Stripe)(218cm) | 0 |
| 25***35 | Film-Identification; (Cat) | 2 |
| 25***36 | Film-Identification; (Caterpillar) | 1 |
257-9738 Film Gp -Us
| 22***30 | Film; (Warning) (High Pressure Cyl) (Platform) | 1 |
| 22***45 | Film-Warning; (Do Not Use Ether, U.S) | 1 |
| 22***21 | Film-Warning; (Seat Belt) | 1 |
286-9251 Plate & Film Gp
| 16***89 | Tack-Fastener | 4 |
| 22***69 | Film-Warning; (Do Not Operate, Read Omm) | 1 |
| 24***18 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
247-0678 Plate & Film Gp
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 1 |
| 22***42 | Film-Warning; (Crush Hazard, Stay Back, U.S.) | 2 |
240-0844 Plate & Film Gp
| 15***64 | Film; (Instruction) (Hydraulic Oil) (On Forward Of And Above The Hydraulic Tank Sight Gage On Tank Surface) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 18***61 | Film; (Alternate Exit) | 1 |
143-7036 Tool Gp-Hand
| 14***36 | Tool Group-Hand | 1 |
Steering System
260-1728 Cylinder Gp-Steering
| 22***61 | Bearing | 2 |
| 25***00 | Ring-Retaining | 1 |
| 25***05 | Seal-Wiper | 1 |
298-5725 Cylinder Gp-Steering
| 22***61 | Bearing | 2 |
| 25***00 | Ring-Retaining | 1 |
| 25***05 | Seal-Wiper | 1 |
240-0848 Lines Gp-Steering
| 10***05 | Tee-O-Ring | 1 |
| 12***26 | Spacer; (13x25x25-mm Thk) | 1 |
| 14***18 | Connector As | 1 |
256-0397 Mounting Gp-Steering Cylinder
| 17***94 | Shim; (0.5-mm Thk) | 2 |
| 17***95 | Shim; (1-mm Thk) | 2 |
| 22***61 | Plate | 2 |
240-0847 Pump & Mtg Gp-Metering -Hmu
| 24***47 | Pump & Mtg Group-Metering; -Hmu | 1 |
| 25***91 | Pump Group-Metering; -Hmu | 1 |
| 8T***36 | Capscrew; (Hex Hd) (M10 X 1.50 X 25l Gr 10.9) | 3 |
257-4891 Pump Gp-Metering -Hmu
| 07***45 | Bearing Kit (Consists Of Parts Marked K) | 1 |
| 09***84 | Seal-O-Ring (Id=15.80mm) | 2 |
| 25***27 | Kit-Seal | 1 |
229-8950 Steering Wheel Gp
| 22***50 | Steering Wheel Group | 1 |
| 26***03 | Pad | 1 |
| 26***04 | Kit-Repair | 2 |
Work Tools
216-8756 Arm Gp-Material Handling
| 15***62 | Film-Information; (Tie-Down Location) | 2 |
| 18***33 | Step Group-Material Handling Arm | 1 |
| 21***56 | Arm Group-Material Handling | 1 |
231-5275 Blade Ar -Angling
| 22***24 | Blade Group-Angling | 1 |
| 22***15 | Harness As-Work Tool; (Connecting) | 1 |
| 23***73 | Lines Group-Connecting | 1 |
177-1989 Blade Ar -Angling
| 13***86 | Edge Group-Cutting | 1 |
| 17***81 | Blade Group-Angling | 1 |
| 17***83 | Spring Group-Blade | 1 |
177-1990 Blade Ar -Angling
| 14***41 | Edge Group-Cutting | 1 |
| 17***82 | Blade Group-Angling | 1 |
| 17***83 | Spring Group-Blade | 1 |
231-5277 Blade Ar -Angling
| 22***15 | Harness As-Work Tool; (Connecting) | 1 |
| 23***73 | Lines Group-Connecting | 1 |
| 23***74 | Cylinder & Mtg Group-Angle Blade | 1 |
231-5276 Blade Gp-Angling
| 16***89 | Tack-Fastener | 4 |
| 22***45 | Edge Group-Bit & Cutting | 1 |
| 22***25 | Frame Group-Blade | 1 |
222-7724 Blade Gp-Angling
| 16***89 | Tack-Fastener | 4 |
| 22***12 | Blade As-Angling | 1 |
| 22***46 | Edge Group-Bit & Cutting | 1 |
177-1981 Blade Gp-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
177-1982 Blade Gp-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
276-5716 Bucket Ar-General Purpose
| 14***99 | Tooth Group-Uni | 7 |
| 26***99 | Bucket As-General Purpose | 1 |
| 27***16 | Bucket Ar-General Purpose | 1 |
276-5715 Bucket Ar-General Purpose
| 14***02 | Edge Group-Cutting | 1 |
| 26***99 | Bucket As-General Purpose | 1 |
| 27***15 | Bucket Ar-General Purpose | 1 |
285-6111 Bucket Ar-Grapple
| 28***00 | Bucket Ar-Utility | 1 |
| 28***11 | Bucket Ar-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
157-7226 Bucket Ar-Grapple
| 13***84 | Edge Group-Cutting | 1 |
| 15***23 | Bucket Ar-Grapple | 1 |
| 15***26 | Bucket Ar-Grapple; -Industrial | 1 |
286-9301 Bucket Ar-Grapple
| 28***44 | Bucket Group-Grapple | 1 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 28***50 | Lines Group-Grapple | 1 |
157-7225 Bucket Ar-Grapple
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
157-7223 Bucket Ar-Grapple
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***23 | Bucket Ar-Grapple | 1 |
217-6230 Bucket Ar-Grapple
| 13***87 | Edge Group-Cutting | 1 |
| 21***29 | Bucket Ar-Grapple | 1 |
| 21***30 | Bucket Ar-Grapple | 1 |
157-7224 Bucket Ar-Grapple
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***24 | Bucket Ar-Grapple | 1 |
285-6112 Bucket Ar-Grapple
| 28***01 | Bucket Ar-Utility | 1 |
| 28***12 | Bucket Ar-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
157-7227 Bucket Ar-Grapple
| 13***85 | Edge Group-Cutting | 1 |
| 15***24 | Bucket Ar-Grapple | 1 |
| 15***27 | Bucket Ar-Grapple; -Industrial | 1 |
286-9300 Bucket Ar-Grapple
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 28***51 | Plate & Film Group | 1 |
| 28***78 | Bucket Group-Grapple | 1 |
158-6095 Bucket Ar-Grapple
| 13***86 | Edge Group-Cutting | 1 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
| 15***95 | Bucket Ar-Grapple; -Industrial | 1 |
217-6229 Bucket Ar-Grapple
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
261-1380 Bucket Ar-Light Material
| 13***24 | Edge-Cutting | 1 |
| 13***32 | Edge; (1880-mm) | 1 |
| 14***03 | Edge Group-Cutting | 1 |
261-1368 Bucket Ar-Light Material
| 13***24 | Edge-Cutting | 1 |
| 13***32 | Edge; (1880-mm) | 1 |
| 14***03 | Edge Group-Cutting | 1 |
259-6010 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***39 | Cylinder Group-Multipurpose Bukt | 2 |
276-5718 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 7 |
| 25***10 | Bucket Ar-Multipurpose | 1 |
| 27***18 | Bucket Ar-Multipurpose | 1 |
259-6060 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***39 | Cylinder Group-Multipurpose Bukt | 2 |
276-5717 Bucket Ar-Multipurpose
| 14***02 | Edge Group-Cutting | 1 |
| 25***10 | Bucket Ar-Multipurpose | 1 |
| 27***17 | Bucket Ar-Multipurpose | 1 |
285-6100 Bucket Ar-Utility
| 13***85 | Edge Group-Cutting | 1 |
| 28***99 | Bucket Group-Utility | 1 |
| 28***00 | Bucket Ar-Utility | 1 |
285-6101 Bucket Ar-Utility
| 13***86 | Edge Group-Cutting | 1 |
| 28***01 | Bucket Ar-Utility | 1 |
| 28***02 | Bucket Group-Utility | 1 |
260-6299 Bucket As-General Purpose
| 13***38 | Edge | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
261-1324 Bucket Gp-General Purpose
| 13***38 | Edge | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
156-0885 Bucket Gp-Grapple
| 14***36 | Edge | 1 |
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 15***40 | Pin | 4 |
156-0884 Bucket Gp-Grapple
| 14***35 | Edge | 1 |
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 15***40 | Pin | 4 |
156-0886 Bucket Gp-Grapple
| 14***37 | Edge | 1 |
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***40 | Pin | 4 |
286-9244 Bucket Gp-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 28***29 | Tine Group | 1 |
286-9278 Bucket Gp-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 28***43 | Fork As | 2 |
217-6228 Bucket Gp-Grapple
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
263-8681 Bucket Gp-Multipurpose
| 13***38 | Edge | 1 |
| 17***05 | Film-Identification; (Bucket Level)(Bucket Level Indicator) | 2 |
| 25***13 | Bucket As | 1 |
259-6011 Bucket Gp-Multipurpose
| 13***38 | Edge | 1 |
| 17***05 | Film-Identification; (Bucket Level)(Bucket Level Indicator) | 2 |
| 25***11 | Bucket Group-Multipurpose | 1 |
285-6102 Bucket Gp-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***02 | Bucket Group-Utility | 1 |
285-6099 Bucket Gp-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***99 | Bucket Group-Utility | 1 |
261-1315 Carriage As-Fork
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 26***11 | Carriage As-Fork | 1 |
261-1409 Carriage Gp-Fork
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 26***08 | Carriage As-Fork | 1 |
256-0395 Coupler Ar-Quick -Horizontal Pin
| 24***28 | Wiring Group-Quick Coupler | 1 |
| 25***95 | Coupler Ar-Quick; -Horizontal Pin | 1 |
| 27***28 | Lines Group-Coupler; -Horizontal Pin | 1 |
256-0392 Coupler Ar-Quick -Manual
| 25***92 | Coupler Ar-Quick; -Manual | 1 |
| 25***04 | Guide Group-Lines; -Quick Coupler | 1 |
| 27***39 | Control Group-Bucket | 1 |
240-6546 Coupler Ar-Quick -Hydrostatic
| 24***46 | Coupler Ar-Quick; -Hydrostatic | 1 |
| 24***48 | Lines Group-Coupler | 1 |
| 24***28 | Wiring Group-Quick Coupler | 1 |
301-4337 Coupler Gp-Quick
| 13***89 | Cylinder Group-Coupler | 2 |
| 24***85 | Pin | 2 |
| 30***37 | Coupler Group-Quick | 1 |
301-4321 Coupler Gp-Quick
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 2 |
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 2 |
301-4341 Coupler Gp-Quick
| 14***68 | Elbow Group | 2 |
| 17***49 | Kit-Seal | 1 |
| 26***09 | Pin As | 2 |
222-7546 Edge Gp-Bit & Cutting
| 14***88 | Edge-Cutting | 1 |
| 22***46 | Edge Group-Bit & Cutting | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 13 |
222-7545 Edge Gp-Bit & Cutting
| 14***14 | Edge-Cutting | 1 |
| 22***45 | Edge Group-Bit & Cutting | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 10 |
135-9387 Edge Gp-Cutting
| 13***87 | Edge Group-Cutting | 1 |
| 13***97 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
141-5002 Edge Gp-Cutting
| 13***23 | Edge-Cutting | 1 |
| 14***02 | Edge Group-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 13 |
135-9386 Edge Gp-Cutting
| 13***86 | Edge Group-Cutting | 1 |
| 13***96 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
135-9385 Edge Gp-Cutting
| 13***85 | Edge Group-Cutting | 1 |
| 13***95 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
149-5741 Edge Gp-Cutting
| 14***41 | Edge Group-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 7 |
| 19***24 | Edge-Cutting | 1 |
135-9384 Edge Gp-Cutting
| 13***84 | Edge Group-Cutting | 1 |
| 13***94 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
162-8139 Fork Ar-Grapple
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
163-4812 Fork Ar-Grapple
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
164-9614 Fork Gp-Grapple
| 16***54 | Tine | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 1 |
| 3E***70 | Pin; (Spring) | 1 |
163-4811 Fork Gp-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***11 | Fork Group-Grapple | 1 |
162-8140 Fork Gp-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***40 | Fork Group-Grapple | 1 |
195-8545 Fork Gp-Pallet
| 19***45 | Fork Group-Pallet | 1 |
| 22***29 | Positioner Group-Fork | 1 |
161-2437 Fork Gp-Pallet
| 16***37 | Fork Group-Pallet | 1 |
| 16***80 | Positioner Group-Fork | 1 |
243-0003 Fork Gp-Pallet -Kit
| 19***45 | Fork Group-Pallet | 12 |
| 24***03 | Fork Group-Pallet; -Kit | 1 |
149-7665 Fork Gp-Pallet
| 14***65 | Fork Group-Pallet | 1 |
| 16***80 | Positioner Group-Fork | 1 |
243-0002 Fork Gp-Pallet -Kit
| 19***42 | Fork Group-Pallet | 12 |
| 24***02 | Fork Group-Pallet; -Kit | 1 |
243-0001 Fork Gp-Pallet -Kit
| 19***43 | Fork Group-Pallet | 12 |
| 24***01 | Fork Group-Pallet; -Kit | 1 |
149-1412 Fork Gp-Pallet
| 14***12 | Fork Group-Pallet | 1 |
| 36***98 | Positioner Group-Fork | 1 |
151-5134 Fork Gp-Pallet
| 15***34 | Fork Group-Pallet | 1 |
| 36***98 | Positioner Group-Fork | 1 |
195-6942 Fork Gp-Pallet
| 19***42 | Fork Group-Pallet | 1 |
| 22***29 | Positioner Group-Fork | 1 |
195-6943 Fork Gp-Pallet
| 19***43 | Fork Group-Pallet | 1 |
| 22***29 | Positioner Group-Fork | 1 |
230-5670 Frame Gp-Blade
| 17***14 | Pin As | 1 |
| 17***55 | Shim; (1-mm Thk) | 1 |
| 17***56 | Shim; (2-mm Thk) | 1 |
285-6116 Grapple & Cylinder Gp-Utility
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***40 | Grapple Group-Utility | 1 |
| 17***36 | Bolt; (M12x1.75x35-mm) | 4 |
165-8740 Grapple Gp-Utility
| 15***11 | Pin | 4 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***40 | Grapple Group-Utility | 1 |
209-3477 Guard Gp-Bucket
| 10***11 | Retainer As | 2 |
| 10***12 | Chain | 1 |
| 10***13 | Spring | 1 |
301-4326 Lock Gp-Mechanical
| 16***60 | Pin-Spring | 1 |
| 19***37 | Plate | 1 |
| 19***42 | Pin | 1 |
301-4323 Lock Gp-Mechanical
| 16***60 | Pin-Spring | 1 |
| 19***37 | Plate | 1 |
| 19***42 | Pin | 1 |
177-1983 Spring Gp-Blade
| 17***41 | Spring | 4 |
| 17***73 | Plate As | 1 |
| 17***83 | Spring Group-Blade | 1 |
188-7733 Step Gp-Material Handling Arm
| 18***86 | Step As | 1 |
| 18***33 | Step Group-Material Handling Arm | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
141-4999 Tooth Gp-Uni
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 1 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
904B serial number reference
The PIN plate is on the front frame, typically on the left side near the articulation joint or cab entry area, per Cat's general wheel-loader PIN-location convention (exact spot can vary by unit). Read the 3-character alphanumeric prefix immediately after the model callout (here B4L) followed by the sequence number; the prefix identifies the model/build series while the sequence number pins down the individual unit for parts and service-manual coverage lookups.
| Prefix | Identifies | Notes |
|---|---|---|
| B4L | 904B Compact Wheel Loader, standard/only documented series | Sole documented PIN prefix for the 904B compact wheel loader, sequence B4L00001 and up. Fitted with the Mitsubishi (MHI) S4Q2T turbocharged 4-cylinder diesel rated near 39 kW (52 hp) at 2400 rpm, about 15% more power than the 902 it replaced. Full PINs recorded in the field follow the pattern CAT0904B_B4L##### (17-character format), with a single plant/check character between the model code and the B4L prefix that varies by unit and does not indicate a different serial family. Documented production spans roughly 2005 into 2008; some spec sheets narrow this to 2007-2008, so treat the exact start year as approximate. |
Frequently asked questions
What engine does the Caterpillar 904B use?
A Mitsubishi (MHI) S4Q2-T turbocharged diesel — a 2.5-liter, four-cylinder engine with mechanical fuel injection, rated around 41 kW gross / 38.8 kW net (55/52 hp) at 2400 rpm.
What is the operating weight of the Cat 904B?
Approximately 4,450 kg (9,810 lb). Actual weight varies by bucket, tire, and counterweight configuration, and slightly more for the Integrated Tool Carrier version.
What replaced the Caterpillar 904B?
Caterpillar continued the 904 nameplate with the 904H starting around 2008, but that model runs a different Cat C2.2 engine and is best treated as a separate generation rather than a direct successor. Buyers should confirm the PIN prefix (B4L for the 904B) before ordering parts, since both machines share a model number but not a drivetrain.
What 904B owners discuss
What engine does the 904B actually run, and are there any known quirks with it?
The 904B uses a Mitsubishi Heavy Industries S4Q2 turbocharged diesel, a four-cylinder unit rated around 39 kW (52 hp) net, with governed speed reported at 2400-2600 rpm depending on the spec sheet consulted. This is not a Cat-designed engine block, so owners note that generic Cat diagnostic tools and some aftermarket code readers have limited support for it - a shop familiar with Mitsubishi industrial diesels (or the machine-specific Cat service literature) reads it best. Cold-start complaints on this engine family trace mostly to the glow plug circuit: slow cranking, rough idle until warm, and light white smoke on startup point to a weak glow plug or its relay/harness rather than the injection pump. Have your dealer verify glow plug circuit resistance and battery/charging condition before condemning injectors.
Owners report the machine loses drive power or feels sluggish over time - what's usually behind it?
This is the most repeated complaint in owner troubleshooting threads on the 904B. Reported causes vary: a rusted or partially seized throttle linkage limiting the engine to roughly half throttle without it being obvious at a glance, a park brake cable that isn't fully releasing and drags the brake, or a creeper/inching control cable that isn't returning fully. On the hydrostatic side, owners chasing this symptom check pump signal pressure, charge pressure, and high-pressure drive circuit pressure against spec with a gauge rated to at least 5800 psi (roughly 400 bar) - one documented case found charge and signal pressure normal but drive pressure reading far below the gauge's range, pointing at the drive pump or motor rather than a simple linkage problem. Work through linkages and cables first since they are the cheap, common fix; only move to pump/motor testing once those are confirmed free. Have your dealer verify hydrostatic pressures against factory spec before replacing pump or motor components.
There's a known complaint about the machine bogging down or stalling when turning right. What causes that?
Operators describe the engine bogging (not necessarily fully stalling) as soon as the steering wheel is turned right, happening at both idle and higher rpm, while turning left is unaffected. The pattern points at the steering circuit loading the hydraulic pump asymmetrically - consistent with a steering control valve or relief valve issue, a restriction specific to one steering cylinder's supply line, or a pump that's marginal and only reveals it under the added steering load. Because engine load response and hydraulic steering share the same pump on this machine, a straightforward compression or fuel check alone won't find it. Have your dealer verify pump output and steering relief valve settings under load rather than chasing it as a pure engine issue.
What wears out first on the 904B's chassis and driveline with age and hours?
As with any articulated compact loader, the center articulation joint (pivot pins and bushings) and the steering-cylinder pins are the highest-wear structural points, taking load every time the frame counter-steers under a loaded bucket. Daily greasing keeps play in check; machines greased inconsistently develop looseness there faster than anywhere else on the frame. Owners also flag the throttle linkage and brake/creeper cable runs as wear-prone on this size of machine since they're mechanical (cable and rod) rather than fully electronic, and they can seize from rust if the machine sits outside or sees winter/snow-removal duty. Tires and bucket cutting edges wear at a rate driven entirely by application (pavement vs. yard vs. snow) rather than by any documented defect.
Are there common electrical or sensor problems reported on this model?
There isn't a well-documented pattern of recurring electrical failures specific to the 904B the way there is for the drive-power and steering-bog complaints. The factory wiring uses sealed, color-coded connectors and a braided harness, which owners generally credit with holding up well against dust and moisture intrusion. Where a no-crank or hydraulics-won't-engage fault does show up on compact wheel loaders of this style, it traces more often to a seat or neutral-start interlock switch, or a corroded harness connector after years of outdoor use, than to an actual sensor or control-module failure - and a brake or creeper cable not returning fully can look like an electrical fault until someone physically checks cable travel. Have your dealer verify the interlock circuit and connector condition before swapping switches on a guess.
Is the hydrostatic transmission on the 904B well regarded by operators?
Yes, generally. The 904B runs a two-speed closed-loop hydrostatic drive, and operators like the smooth transition from full rimpull down to a dead stop, plus fine inching control for tight-space work - one of the reasons this class of loader gets compared favorably to a skid steer for maneuverability while still offering wheel-loader ride and visibility. The tradeoff owners note is that hydrostatic drivetrains are sensitive to fluid condition and cable/linkage adjustment, so the power-loss and steering-bog complaints above are more often traced to control linkages and pressures than to the hydrostatic pump or motor failing outright.
What should a buyer check before purchasing a used 904B?
Run the drivetrain through its full range before buying, including a hard turn in both directions under a loaded bucket - that single test surfaces the steering-bog and weak-drive complaints owners report most often. Beyond the test drive: confirm the throttle linkage moves freely through full travel and isn't rusted or seized; check articulation-joint and lift-arm pin and bushing play by rocking the frame and bucket, and look for cracks, dents, or weld repairs on the lift arms and bucket; inspect hydraulic hoses, cylinders, and fittings for leaks or damage; check the engine for obvious leaks or loose belts and note the air filter's last service date; verify electrical connectors are sealed and free of corrosion; start the machine and confirm all gauges, the pilot joystick, and the back-up alarm work correctly; and inspect the ROPS/canopy structure for bends or damage if the machine isn't fully enclosed. Ask for service records and compare them to the hour meter. Have your dealer or a qualified technician verify hydrostatic drive and steering-circuit pressures with a gauge, and confirm engine identity (S4Q2 turbo diesel) against the data plate, as part of a pre-purchase inspection.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 904B part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.