Caterpillarwheel dozer
Caterpillar 854G
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 854G is a large, articulated-steer wheel dozer built for high-production dozing in surface mines, quarries, and bulk-material yards. It runs a turbocharged Cat 3508B diesel with electronic unit injection, rated at roughly 656 kW (880 hp) gross and 597 kW (800 hp) net at 1,750 rpm, paired with an electronically controlled planetary powershift transmission and an Impeller Clutch Torque Converter (ICTC) with lockup. Operating weight runs from about 96,266 to 99,395 kg (212,230 to 219,128 lb) depending on blade and counterweight fitment, with semi-U, heavy-duty semi-U, and coal blade options offered in single- or dual-tilt configuration and blade capacities from roughly 25 to 45 cubic meters (33 to 58 cubic yards). Caterpillar introduced the 854G in 1997-98 after acquiring the design from Tiger Engineering of Western Australia, whose 790G (built for BHP's Mt Whaleback iron ore operation) carried the same 3508B powertrain and a front structure derived from the D11R track-type tractor. It remained in the Cat lineup until being replaced by the C32 ACERT-powered 854K around 2013.
The 854G is the only generation in the 854 family that originated outside Caterpillar's own engineering group. Its Tiger Engineering roots, traceable through the earlier 690A, 690B, and 690D wheel dozers built for Western Australian iron ore mines, explain why its chassis, axle, and articulation geometry differ from Cat's home-grown 814/824/834/844 wheel dozer line, and why its front frame follows D11R dozer proportions rather than a purpose-built wheel dozer layout. In the used and parts market, 854G units are valued for a mechanically straightforward, pre-emissions 3508B EUI engine and a proven ICTC transmission, both well understood by rebuild shops and generally easier to keep running long-term than the more electronically dense powertrain on the 854K. Condition and remaining life vary widely between units depending on blade configuration and application, so parts sourcing should key off the machine's own engine and axle serial prefixes rather than assume interchangeability with 854K components.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 854G specifications
Engine
| Engine model | Cat 3508B EUI diesel, turbocharged V8 |
| Emissions | Tier 2, ADEM II electronic engine control |
| Gross power | 656 kW (880 hp) |
| Net (flywheel) power | 597 kW (800 hp) |
| Power measured at | 1750 rpm |
| Displacement | 34.5 L (2105.4 cu in) |
| Net torque | 4218 Nm (3111 lb-ft), 30% torque rise |
Weights
| Operating weight, base/S-blade configuration | approx. 96,266-99,395 kg (212,230-219,125 lb) — varies by configuration/series |
| Operating weight, Semi-U blade configuration | 101,720 kg (224,239 lb) |
| Semi-U blade weight | 10,161 kg (22,400 lb) |
| Note | Operating weight shifts with blade type fitted; treat single-figure weights as base-configuration estimates |
Dimensions
| Length, blade on ground | 13.4 m (44.0 ft) |
| Width over tires | 4.52-4.54 m (14.83-14.9 ft) |
| Height to top of cab | 5.52-5.55 m (18.12-18.2 ft) |
| Wheelbase | 5.89-5.91 m (19.33-19.4 ft) |
| Ground clearance | 1.3 m (4.25 ft) per most spec sheets |
| Turning circle, with blade | 9.9 m (32.5 ft) |
| Steering angle | 43 degrees |
| Axle oscillation | 11 degrees |
| Tire size | 45/65R45, L-4 |
Performance
| Transmission | Electronically controlled planetary powershift, 3 forward / 3 reverse, impeller-clutch torque converter with lockup clutch |
| Max forward speed | 21.1-21.2 km/h (13.2 mph) |
| Max reverse speed | 23.2-23.3 km/h (14.5 mph) |
| Rimpull control | Rimpull Control System (RCS) with selectable maximum, high, medium, and low preset rimpull levels — no single published drawbar-pull figure found across available spec sheets |
| Ground pressure | Not published for this tire-mounted configuration; flotation is governed by the 45/65R45 L-4 tire size rather than a ground-pressure spec |
| Gradeability | Not documented in available spec sheets — verify with dealer or Performance Handbook |
Blades
| S blade (straight) capacity | 25.4 m3 (33.3 yd3) |
| S blade width | 6.34 m (20.8 ft) |
| S blade height | 2.19 m (7.2 ft) |
| Semi-U blade capacity | 30.5 m3 (40 yd3) |
| Semi-U blade width | 6.32 m (20.7 ft) |
| Semi-U blade height | 2.18 m (7.1 ft) |
| Semi-U blade digging depth | 0.4 m (1.3 ft) |
| Semi-U blade ground clearance (raised) | 1.54 m (5.1 ft) |
| Semi-U blade max tilt | 1.17 m (3.8 ft) |
| Coal blade capacity | approx. 44.8 m3 (58.6 yd3), largest factory blade option |
| Full blade capacity range across all offered blade types | 25-45 m3 (33-58 yd3) |
| U blade | Offered in the factory blade lineup alongside S, Semi-U, and Coal blades; detailed dimensions not found in available sources |
Service Capacities
| Fuel tank | 1344 L (355 gal) |
| Cooling system | 204 L (53.9 gal) |
| Engine oil | 102 L (27 gal) |
| Hydraulic system | 326 L (86.2 gal) |
| Transmission | 169 L (44.7 gal) |
| Front differential/final drive | 345 L (91.2 gal) |
| Rear differential/final drive | 326 L (86.2 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
854G fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 102 L (27 US gal) | Cat DEO (Diesel Engine Oil), API CG-4 level. SAE 15W-40 for ambient range roughly -9.5C to 40C+ (15F to 104F+). SAE 10W-30 where ambient runs colder, down to about -18C (0F). Below that, Cat Arctic-grade DEO or a full-synthetic DEO-ULS SAE 0W is called for. 3508B EUI diesel is the factory engine for this series. |
| Cooling system | 204 L (53.9 US gal) | Cat DEAC (Diesel Engine Antifreeze/Coolant), pre-mixed 50/50 with water, topped with SCA per the maintenance interval. Cat ELC (Extended Life Coolant) is the full-fill alternative where extended-service coolant is wanted; do not mix ELC and DEAC in the same system. |
| Fuel tank (standard) | 1344 L (355 US gal) | No. 2-D diesel fuel for normal service; No. 1-D or a winter-blend for cold-climate starting below about -1C (30F). |
| Powershift transmission | 169 L (44.7 US gal) | Cat TDTO (Transmission/Drive Train Oil), meeting Cat TO-4 spec. Grade by ambient: SAE 10W below roughly 0C, SAE 30 for the 0-30C band, SAE 50 above about 30C. Cold-Weather TDTO for sustained sub-zero operation. |
| Final drive / differential - front axle | 345 L (91.2 US gal) | Cat TDTO, TO-4 spec, same grade selection as the transmission. Front axle housing carries the differential and final drives as one combined sump on this machine; the OMM does not break out a separate bevel-gear/steering-compartment fill for this series. |
| Final drive / differential - rear axle | 326 L (86.2 US gal) | Cat TDTO, TO-4 spec, same grade selection as the transmission. Rear axle housing likewise combines differential and final drives in one sump. |
| Hydraulic system / tank | 326 L (86.2 US gal) | Cat HYDO Advanced is the factory-fill choice (10W/20W/30W by ambient temperature), giving the longest drain interval when paired with S.O.S oil sampling. Cat TDTO (TO-4) is an accepted second-choice fluid for this compartment. Confirm capacity against your machine's OMM or nameplate before ordering fluid. |
| Pivot / steering-hinge joint | Not published as a fill capacity | Grease-lubricated at the articulation/hinge pins per the lubrication schedule; no separate reservoir capacity is listed in factory specs for this series. |
| Grease (chassis and pin points) | Per fitting, per lubrication schedule (no bulk capacity figure) | Cat Extreme Application (XL) grease or Cat Advanced 3Moly/Utility grease, NLGI 2 for normal ambient service. Drop to NLGI 1 or 0 in sustained cold-climate operation. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 854G maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 854G beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S.O.S sampling on the 3508B's engine oil, ICTC transmission oil, front/rear differential and final drive oil, and hydraulic oil at every scheduled interval. Watch for fuel dilution in engine samples, a common flag on EUI injectors, and for rising iron and chromium counts that point to differential or final drive wear before a rebuild is needed. Track coolant condition on the ELC system between full changes. Trend blade cylinder and steering cylinder oil samples too, since the 854G's high dozing loads accelerate seal wear.
Corrective & Common Repairs
Expect ICTC lockup clutch and torque converter housing leaks as the most common powertrain complaint on high-hour 854G units, along with worn u-joints and articulation bearings from constant dozing loads. Unit injector fuel dilution and turbocharger shaft play are the usual 3508B flags caught by oil sampling before a failure. Blade cutting edges, end bits, and tilt cylinder pins wear fast under production dozing and need routine replacement. Heavy-duty axle gears and bearings hold up well but should be inspected for pitting at every differential oil change.
Overhaul & Rebuild Points
Major rebuild work centers on the planetary powershift transmission clutch packs, the ICTC impeller and turbine assembly, and the final drive planetary gearsets, all of which see heavy load cycling in dozing service. The 3508B's turbocharger cartridge and unit injectors are typical mid-life exchange items ahead of a full engine overhaul. Because the 854G's front frame and axle carriers trace back to Tiger Engineering's D11R-based design, structural and axle housing repairs should reference the 854G-specific service manual rather than other Cat wheel dozer literature.
Seasonal & Environment Servicing
In cold climates, use the correct low-temperature blend for the ELC coolant and confirm engine oil viscosity suits ambient starting temperatures before cold-starting the 3508B. In hot, dusty mine environments, shorten air filter and S.O.S sampling intervals given the high intake volume of a turbocharged 3508-series engine. Check 45/65R45 tire pressures more frequently through temperature swings, since a wheel dozer of this size loads its tires heavily during blade work. Clean radiator and aftercooler cores often in abrasive dust to protect cooling performance.
854G common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 222-6713 | Filter As-Fuel | Fuel system service | Check fitment → |
| 123-6855 | Filter Element As-Air | Air intake service | Check fitment → |
| 123-6856 | Filter Element As-Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
| 132-8876 | Filter Element As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
854G fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 0190 FMI 08 | Engine speed/timing sensor signal abnormal or lost | Loose or corroded sensor connector, damaged harness, or sensor gap drifted too far from the flywheel/crank gear | Inspect and clean the speed/timing sensor connector and harness, check sensor air gap, then clear and recheck code |
| CID 0100 FMI 04 | Engine oil pressure sensor voltage below normal | Faulty oil pressure sensor, damaged wiring, or genuinely low oil pressure | Check oil level first, then inspect sensor wiring and connector for damage or corrosion before replacing the sensor |
| CID 0110 FMI 03 | Engine coolant temperature sensor voltage above normal | Open circuit or failed coolant temperature sensor, or damaged connector pin | Inspect sensor connector for corrosion or an open circuit, test sensor resistance against spec, replace if out of range |
| CID 0111 FMI 04 | Engine coolant level sensor low signal / low coolant warning | Low coolant level, stuck float, or sensor/wiring fault | Check coolant level and top off if low, inspect for leaks, then test sensor circuit if level is correct |
| CID 0102 FMI 04 | Boost (intake manifold) pressure sensor voltage below normal | Failed boost pressure sensor, plugged or damaged sense line, or connector fault | Inspect sense line for blockage or damage, check sensor wiring, replace sensor if signal stays out of range |
| CID 0094 FMI 04 | Fuel delivery pressure sensor voltage below normal | Restricted or plugged fuel filter, air in the fuel system, or a failed pressure sensor | Check and replace fuel filters, bleed air from the fuel system, then retest the sensor circuit |
| CID 0001 FMI 05 | Cylinder injector solenoid open circuit (electronic unit injector) | Broken or disconnected injector wiring, failed injector solenoid on the EUI fuel system | Inspect injector harness and connector for the affected cylinder, test solenoid resistance, repair or replace as needed |
| CID 0138 | Reduced rimpull selection switch circuit fault | Faulty rimpull control switch, damaged wiring, or a stuck switch affecting the Rimpull Control System | Inspect the rimpull selector switch and its wiring, verify switch operation with a multimeter, replace switch if defective |
| CID 0177 FMI 08 | Torque converter oil temperature sensor abnormal signal | Sensor or wiring fault, or a genuine high torque converter oil temperature under sustained high-load operation | Confirm actual converter oil temperature with a manual check before condemning the sensor, then inspect wiring and connector |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
854G attachments & work tools
Blades
The 854G ships with one Cat-engineered dozing blade sized for its 3508B power class, base semi-U profile: about 6.32 m (20 ft 9 in) wide, 2.18 m (7 ft 2 in) tall, rated near 25.4 m3 (33.3 yd3) struck/heaped capacity. Cat literature quotes a blade capacity range of roughly 25-45 m3 (33-58 yd3) across configurations, so capacity varies by cutting-edge and end-bit setup rather than a full S/SU/U/A model lineup like the crawler dozers. VPAT (variable-pitch tilt) is a track-type-tractor blade feature and is not documented as an 854G option; the wheel dozer's single lever controls raise/lower, tilt, and pitch on the fixed semi-U-style moldboard. Replaceable bolt-on cutting edges and bottom wear plates protect the blade structure.
Rippers
No rear ripper option is documented for the 854G in Cat literature or dealer spec sheets. Rear-mounted rippers (single or multi-shank) are a track-type tractor attachment class (D8-D11 range); large wheel dozers like the 854G are built for push/carry dozing and articulated steering, not drawbar ripping, so Cat does not catalog a shank count or ripper weight for this chassis. If ripping is needed alongside 854G dozing work, it is normally done with a separate crawler tractor.
Winches
No factory winch option is documented for the 854G. Towing/recovery winches are cataloged for crawler tractors (D-series), not for large wheel dozers; the 854G's rimpull control system and torque-converter drivetrain are built for pushing loads, not winch-assisted pulling, so no winch class fitment is published for this model.
Drawbars/counterweights
Cat spec sheets for the 854G do not list a rear drawbar or bolt-on counterweight option; the machine's box-section rear frame and two-plate front frame are described as providing dozing-shock resistance on their own. Operating weight is quoted near 99,400 kg (219,200 lb) in base trim, and no supplemental ballast package is documented for this model — verify with your dealer if a specific job needs added rear mass.
Cab/ROPS guarding
Standard cab is a sound-suppressed, pressurized ROPS/FOPS structure meeting SAE J1040/ISO 3471 (rollover) and SAE J231/ISO 3449 Level II (falling object) criteria. No forestry- or waste-specific guarding package (screened windows, belly guards, debris shields) is documented for the 854G; this size class is aimed at mining/quarry/utility dozing rather than forestry mulching or landfill compaction work, so any added screening or window guarding for waste/quarry duty would be a job-site or dealer-fitted addition rather than a factory catalog option — confirm availability with your dealer.
Hydraulic arrangement
The 854G runs two independent hydraulic systems: one for implement (blade) functions and one for steering, so blade work does not rob steering response or vice versa. Steering is load-sensing hydraulic with about 43 degrees of articulation for tight-area positioning. A single lever (STIC-integrated control) hydraulically operates all blade functions — raise, lower, tilt, and pitch — with no separate rear-tool circuit since no rear ripper or winch is offered on this model.
All 854G assemblies by section
Every catalogued assembly group for the Caterpillar 854G. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
108-1581 Aftercooler Gp-Treated Water
| 10***81 | Aftercooler Group-Treated Water | 1 |
| 11***76 | Cover As | 1 |
| 12***55 | Filter Element As-Air; (Primary) | 1 |
112-6067 Air Cleaner Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 18 |
123-6854 Air Cleaner Gp
| 10***19 | Sleeve-Exhaust Manifold | 2 |
| 11***71 | Manifold-Exhaust; (Rear, Rh) | 1 |
| 11***72 | Manifold-Exhaust; (Rear, Lh) | 1 |
161-1541 Lines Gp-Air
| 12***68 | Brace | 1 |
| 15***28 | Muffler As | 2 |
| 16***33 | Support As | 1 |
115-0550 Manifold Gp-Exhaust
| 11***50 | Manifold Group-Exhaust | 1 |
| 12***68 | Brace | 1 |
| 15***28 | Muffler As | 2 |
112-6003 Muffler Gp
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 11***03 | Muffler Group | 1 |
| 11***09 | Hose | 2 |
112-6008 Precleaner Gp -Air
| 11***08 | Precleaner Group; -Air | 1 |
| 11***28 | Housing | 1 |
| 14***18 | Cover-Compressor | 1 |
267-4469 Turbocharger Gp
| 18***95 | Vent As | 1 |
| 1H***28 | Seal (3.73 In. Inside Diameter) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
156-6262 Turbocharger Gp
| 12***36 | Gasket; (Turbocharger) | 2 |
| 12***14 | Coupling-Exhaust | 2 |
| 15***62 | Turbocharger Group | 1 |
301-6871 Turbocharger Gp
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 6 |
| 14***38 | Coupling-Permanent | 2 |
| 1H***28 | Seal (3.73 In. Inside Diameter) | 1 |
169-2573 Turbocharger Gp
| 16***73 | Turbocharger Group | 1 |
| 23***58 | Clamp As-Compressor; (V-Band) | 1 |
| 25***89 | Housing-Turbine | 1 |
Basic Engine
101-0833 Balancer Gp -Front
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 10***33 | Balancer Group; -Front | 1 |
| 10***65 | Plate-Thrust | 1 |
120-7413 Base Gp-Valve Cover
| 11***38 | Spacer; (17.5x30.94x98-mm) | 1 |
| 11***39 | Spacer; (17.5x30.94x98-mm) | 1 |
| 12***39 | Washer-Spring | 1 |
247-8341 Base Gp-Valve Cover -Rocker Arm
| 11***38 | Spacer; (17.5x30.94x98-mm) | 1 |
| 11***39 | Spacer; (17.5x30.94x98-mm) | 1 |
| 12***39 | Washer-Spring | 1 |
106-4582 Camshaft Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 10***82 | Camshaft Group | 1 |
| 12***04 | Camshaft As; (Lh) | 1 |
119-6285 Cover Gp-Cylinder Block
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 58 |
| 11***85 | Cover Group-Cylinder Block | 1 |
112-6019 Cover Gp-Flywheel Housing
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 35 |
163-1472 Cover Gp-Front Housing -Lh
| 16***72 | Cover Group-Front Housing; -Lh | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 17 |
| 23***46 | Seal-O-Ring | 1 |
101-0831 Cover Gp-Valve Mechanism
| 10***31 | Cover Group-Valve Mechanism | 1 |
| 10***97 | Cover | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
101-0336 Crankshaft Gp
| 10***36 | Crankshaft Group | 1 |
| 12***45 | Bolt As; (5/8-18x4.25-In)(Counterweight) | 18 |
| 14***31 | Bearing As-Main; (Standard) | 5 |
241-0222 Crankshaft Gp
| 12***45 | Bolt As; (5/8-18x4.25-In)(Counterweight) | 18 |
| 14***31 | Bearing As-Main; (Standard) | 5 |
| 14***32 | Bearing-Main; (0.63-mm Us Id) | 0 |
101-1171 Cylinder Block As
| 10***71 | Cylinder Block As | 1 |
| 21***26 | Liner-Cylinder Block | 8 |
| 22***96 | Cap-Crankshaft Bearing | 5 |
350-1409 Cylinder Block As
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 10***71 | Cylinder Block As | 1 |
| 10***98 | Bearing-Camshaft | 10 |
237-7957 Cylinder Block Gp
| 13***06 | Guide-Valve; (Standard)(Intake) | 2 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 19***95 | Guide-Valve; (Standard)(Exhaust) | 2 |
154-1612 Cylinder Head As
| 11***91 | Gasket-Cylinder Head | 1 |
| 13***20 | Fastener Group-Cylinder Head | 6 |
| 13***21 | Fastener Group-Cylinder Head | 2 |
242-5328 Cylinder Head As
| 13***06 | Guide-Valve; (Standard)(Intake) | 2 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 15***12 | Cylinder Head As | 1 |
317-2440 Cylinder Head Gp
| 19***88 | Damper As | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 10 |
| 31***40 | Cylinder Head Group | 1 |
317-2441 Cylinder Head Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***00 | Bearing-Sleeve | 1 |
101-0830 Cylinder Head Gp
| 10***30 | Cylinder Head Group | 1 |
| 13***06 | Guide-Valve; (Standard)(Intake) | 2 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
201-4257 Cylinder Head Gp
| 11***91 | Gasket-Cylinder Head | 1 |
| 13***20 | Fastener Group-Cylinder Head | 6 |
| 13***21 | Fastener Group-Cylinder Head | 2 |
8n-7182 Damper Gp
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 4 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 4 |
| 11***36 | Adapter | 1 |
4p-0853 Drive Gp-Accessory -Upper, Rh-Alternator
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
| 11***65 | Bearing | 1 |
| 12***00 | Bearing-Sleeve | 1 |
161-1540 Drive Gp-Accessory -Lower, Lh
| 16***40 | Drive Group-Accessory; -Lower, Lh | 1 |
| 5P***39 | Washer-Hard; (28x42x4-mm Thk) | 12 |
| 8N***96 | Gear (151 Teeth) | 1 |
112-6035 Drive Gp-Accessory -A/C Compressor
| 11***35 | Drive Group-Accessory; -A/C Compressor | 1 |
| 5P***55 | Hose 13.97 cm(5.5 In.); 9cm(3.54in)Lg Each | 0 |
| 5P***60 | Hose 80 cm(3.15 In.) | 0 |
112-6004 Extension Gp-Drain
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 5 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
9y-7669 Flywheel Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 10***64 | Gear As-Idler; (69-Teeth)(Camshaft) | 2 |
| 10***65 | Plate-Thrust | 1 |
8n-7174 Gear Gp-Front -Standard Rotation
| 27***35 | Spacer; (13.87x21.34x11-mm Thk) | 2 |
| 28***74 | Guard As-Alternator | 1 |
| 8N***74 | Gear Group-Front; -Standard Rotation-Accessory Drive-Jacket Water Pump-Fuel Transfer Pump-Oil Pump Drive | 1 |
101-1361 Gear Gp-Rear
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 1 |
| 10***61 | Gear Group-Rear | 1 |
| 11***71 | Housing As-Flywheel | 1 |
7w-5780 Guard Gp-Belt -Alternator
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 10***34 | Housing-Accessory Drive | 1 |
| 1B***18 | Washer; (25/64 X 5/8 X .064in Thk) | 6 |
112-6070 Housing Gp-Flywheel
| 11***70 | Housing Group-Flywheel | 1 |
| 14***11 | Pulley As-Idler | 1 |
| 14***22 | Bolt-Special; (M10x1.5 Thd) | 1 |
4p-5426 Housing Gp-Front -Accessory Drive
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 15***26 | Bracket As | 2 |
| 19***86 | Retainer-Eye; (Rear) | 1 |
144-5612 Idler Gp-Belt
| 05***65 | Sleeve | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 14***16 | Belt-Serpentine; (Alternator) | 1 |
7e-6872 Lifting Gp-Engine
| 05***65 | Sleeve | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 14***16 | Belt-Serpentine; (Alternator) | 1 |
7e-4836 Mounting Gp-Alternator
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 6 |
143-5129 Pan Gp-Oil
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 1 |
| 10***30 | Bearing-Connecting Rod; (Standard) | 1 |
| 10***31 | Bearing-Connecting Rod; (0.63-mm Us Id) | 0 |
223-6363 Piston & Rod Gp
| 11***32 | Seal Group-Crankshaft; (Cw Rotation) | 1 |
| 11***33 | Seal Group-Crankshaft; (Ccw Rotation) | 1 |
| 22***63 | Piston & Rod Group | 1 |
281-6139 Piston & Rod Gp
| 1D***66 | Bolt Bracket Assembly To Yoke | 20 |
| 28***39 | Piston & Rod Group | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 20 |
7w-3813 Seal Gp-Crankshaft
| 11***68 | Bolt; (M16x2x280-mm) | 8 |
| 11***05 | Support | 2 |
| 2N***06 | Bolt-12 Point Head | 6 |
112-6002 Support Gp-Engine
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
| 10***77 | Retainer-Spring | 1 |
7e-4722 Support Gp-Engine
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
224-9869 Valve Mechanism Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
261-6944 Valve Mechanism Gp
| 26***44 | Valve Mechanism Group | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 4B***50 | Fitting-Pressure Relief; (1/8-27 Ptf)(Belt Tightener) | 1 |
Braking System
220-2718 Accumulator Gp-Brake -Charged
| 14***48 | Cage As-Bearing | 1 |
| 16***33 | Plate | 1 |
| 16***70 | Spring | 9 |
220-2719 Accumulator Gp-Brake -Uncharged
| 10***06 | Dowel-Hollow; (35.0 Odx45.0mm Oal) | 8 |
| 11***58 | Seal; (409.2mm Id) | 1 |
| 13***32 | Hub | 1 |
170-4618 Brake Gp-Parking
| 10***06 | Dowel-Hollow; (35.0 Odx45.0mm Oal) | 8 |
| 11***58 | Seal; (409.2mm Id) | 1 |
| 13***32 | Hub | 1 |
164-0935 Brake Gp-Service
| 16***35 | Brake Group-Service | 1 |
| 23***35 | Control Group-Foot Brake | 1 |
| 8T***47 | Bolt (M8x1.25x30mm); (M8x1.25x30-mm) | 7 |
275-0080 Brake Gp-Service
| 00***01 | Ring-Retaining | 2 |
| 18***54 | Base Group-Foot Brake; -Pedal, Lh | 1 |
| 18***55 | Base Group-Foot Brake; -Pedal, Rh | 1 |
112-2273 Control Gp-Foot Brake
| 09***67 | Pin-Clevis | 1 |
| 11***73 | Control Group-Foot Brake | 1 |
| 12***71 | Knob | 1 |
237-9835 Control Gp-Foot Brake
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 16***77 | Plug As | 1 |
| 17***02 | Plate | 1 |
4e-6401 Control Gp-Parking Brake
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 16***80 | Hose As | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
227-8839 Control Gp-Service Brake
| 16***09 | Plug As-Hydraulic | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 22***39 | Control Group-Service Brake | 1 |
163-6501 Control Gp-Service Brake
| 10***08 | Valve Group-Check; (Brake Accumulator) | 2 |
| 11***99 | Hose As | 1 |
| 11***16 | Block | 2 |
163-6506 Control Gp-Service Brake
| 14***60 | Elbow Group | 1 |
| 15***28 | Elbow As | 1 |
| 16***06 | Control Group-Service Brake | 1 |
174-9328 Filter & Lines Gp-Brake
| 11***35 | Manifold-Brake | 1 |
| 11***52 | Bracket As | 1 |
| 12***66 | Hose As | 1 |
166-4647 Filter Gp-Oil -Case Drain
| 00***00 | Ring-Snap | 2 |
| 10***13 | Seal-Shaft | 1 |
| 10***60 | Housing As-Pump | 1 |
132-2131 Lines Gp-Service Brake
| 13***31 | Lines Group-Service Brake | 1 |
| 8J***73 | Ring-Retaining | 1 |
| 9T***36 | Washer-Spherical | 1 |
164-5486 Pump Gp-Piston -Brake
| 10***95 | Screen As-High Pressure | 1 |
| 16***86 | Pump Group-Piston; -Brake | 1 |
| 19***18 | Ring-Backup | 1 |
9t-4219 Rotating Gp-Pump -Brake
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***87 | Bracket As | 1 |
174-4502 Screen Gp-High Pressure
| 17***02 | Screen Group-High Pressure | 1 |
| 25***76 | Repair Kit; (Includes Boot, Seals, Ring, Ball And Springs) | 1 |
| 4J***33 | Seal Fuel Injection Pump | 2 |
224-8602 Valve & Mtg Gp-Brake Control -Parking
| 22***02 | Valve & Mtg Group-Brake Control; -Parking | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6V***98 | Seal-O-Ring -Line From Gear Pump Output | 1 |
106-1774 Valve Gp-Brake Control -Parking
| 10***74 | Valve Group-Brake Control; -Parking | 1 |
| 3G***23 | Spring | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 1 |
171-6722 Valve Gp-Check -Brake Pump
| 16***99 | Rod; (158.8-mm, Oal) | 1 |
| 16***00 | Seat | 1 |
| 17***22 | Valve Group-Check; -Hydraulic Oil Clr Bypass, Steering | 1 |
4t-1909 Valve Gp-Pump Control -Pressure Compensator-Brake
| 16***02 | Rod; (152.2-mm, Oal) | 1 |
| 16***03 | Rod; (151.8-mm, Oal) | 1 |
| 16***04 | Rod; (152-mm, Oal) | 1 |
Cooling System
2w-6571 Cooler Gp-Engine Oil
| 11***50 | Adapter | 1 |
| 14***67 | Spacer; (13x30x22.2-mm Thk) | 8 |
| 23***01 | Channel As | 2 |
112-6014 Connection Gp-Water -Outlet
| 11***14 | Connection Group-Water; -Outlet | 1 |
| 5M***14 | Pipe Plug Cylinder Block Oil Pressure | 2 |
4w-0419 Core Gp-Oil Cooler -Transmission
| 11***74 | Valve As-Vent Line | 1 |
| 12***49 | Housing As-Regulator | 1 |
| 24***13 | Regulator-Water Temperature; (92-Deg C)(Water, Coolant Temperature) | 4 |
110-8684 Fan Gp-Suction
| 10***92 | Grommet | 1 |
| 11***84 | Fan Group-Suction | 1 |
| 11***58 | Hose | 1 |
127-4450 Housing & Regulator Gp -Outlet Control
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 2 |
161-1565 Lines Gp-Coolant
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 24 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 30 |
| 12***56 | Gasket | 2 |
155-0542 Lines Gp-Turbocharger Water
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 03***67 | Connector-Flared -- Adapter To Hose As. | 1 |
| 03***68 | Elbow (For Use With Shallow Pan) | 1 |
112-6048 Lines Gp-Water -Lower
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 03***67 | Connector-Flared -- Adapter To Hose As. | 1 |
| 03***68 | Elbow (For Use With Shallow Pan) | 1 |
161-1530 Lines Gp-Water -Aftercooler
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 9 |
161-1555 Lines Gp-Water -Bypass
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
| 16***55 | Lines Group-Water; -Bypass | 1 |
| 1T***65 | Bolt 2.54 cm (1" Long) | 1 |
7e-9218 Lines Gp-Water -Upper
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 03***67 | Connector-Flared -- Adapter To Hose As. | 1 |
| 03***68 | Elbow (For Use With Shallow Pan) | 1 |
161-1570 Lines Gp-Water -Aftercooler Return
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
| 16***70 | Lines Group-Water; -Aftercooler Return | 1 |
| 1T***65 | Bolt 2.54 cm (1" Long) | 1 |
1w-0410 Pump Gp-Auxiliary Water
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***00 | Bearing-Sleeve | 1 |
| 1W***10 | Pump Group-Auxiliary; -Aftercooler | 1 |
291-4313 Pump Gp-Auxiliary Water -Fresh Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 16***74 | Ring As | 1 |
| 16***76 | Seal Group-Water Pump; (Face Type) | 1 |
212-8169 Pump Gp-Auxiliary Water -Fresh Water
| 14***62 | Seal-O-Ring | 1 |
| 21***69 | Pump Group-Auxiliary Water; -Fresh Water | 1 |
| 21***75 | Pump Group-Water | 1 |
212-8175 Pump Gp-Water
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
| 03***83 | Union-Flared | 1 |
| 09***82 | Reducer | 1 |
169-4691 Pump Gp-Water
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
| 03***83 | Union-Flared | 1 |
| 09***82 | Reducer | 3 |
174-9172 Radiator Gp
| 00***25 | Elbow-Flared | 2 |
| 14***53 | Hose; (272.2-cm) | 0 |
| 14***39 | Hose As | 1 |
166-3644 Radiator Gp
| 11***16 | Core As-Radiator | 10 |
| 16***44 | Radiator Group | 1 |
174-9063 Radiator Gp
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 17 |
| 11***76 | Bracket | 4 |
| 11***53 | Shroud As | 1 |
174-9902 Shroud Gp-Radiator
| 11***35 | Bracket As | 1 |
| 12***72 | Hose-Hydraulic; (129-In) | 0 |
| 17***02 | Shroud Group-Radiator | 1 |
167-7578 Tank Gp-Radiator Top
| 11***35 | Bracket As | 1 |
| 12***72 | Hose-Hydraulic; (129-In) | 0 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
175-0118 Valve Gp-Radiator Drain -Separate Circuit Aftercooler
| 11***39 | Plate As | 1 |
| 12***54 | Air Cleaner Group | 2 |
| 13***03 | Support Group-Air Inlet; -Rh | 1 |
134-1438 Valve Gp-Radiator Drain
| 10***58 | Seal; (Aftercooler) | 2 |
| 11***59 | Core As-Aftercooler | 1 |
| 13***38 | Valve Group-Radiator Drain | 1 |
Electrical And Starting System
7w-8155 Heater Gp-Jacket Water
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
| 18***49 | Clamp | 2 |
7w-8154 Heater Gp-Jacket Water
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
| 18***49 | Clamp | 2 |
6v-0889 Starting Motor Gp-Electric
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
1w-6363 Starting Motor Gp-Electric
| 1W***63 | Starting Motor Group-Electric | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
3e-6328 Alarm Gp -Action
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
197-8820 Alternator Gp-Charging
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***20 | Alternator Group-Charging; -24-Volt, 95-Ampere | 1 |
316-7251 Alternator Gp-Charging
| 0V***75 | Screw,Cap,Hexagon H Shaft Mtg,Accessory Drive | 4 |
| 11***87 | Elbow | 1 |
| 11***06 | Plate As | 1 |
9x-7803 Alternator Gp-Charging
| 11***86 | Receptacle As-Auxiliary Start | 1 |
| 11***90 | Cable As | 1 |
| 11***91 | Cable As | 1 |
109-6895 Battery & Wiring Gp
| 10***95 | Battery & Wiring Group | 1 |
| 16***14 | Control Group-Unprogrammed; -Product Link 201 | 1 |
| 23***40 | Film; (Warning) (Product Link, Ansi) (On Lh Front Post Inside Cab) | 1 |
126-0182 Buffer Gp-Sensor -Fuel Level
| 12***82 | Buffer Group-Sensor; -Fuel Level | 1 |
112-6005 Control & Mtg Gp-Engine Elek
| 11***05 | Control & Mtg Group-Engine Elek | 1 |
| 17***03 | Control Group-Engine Electronic; -Rear Ecm-Front Ecm | 1 |
299-4673 Control Gp-Communication
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 14***80 | Battery Group-Electronic Control; (Road Analysis/Vims Main Module) | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
242-7205 Control Gp-Communication -Product Link 201
| 10***87 | Bolt; (M5x0.8x12-mm) | 4 |
| 11***11 | Cover | 1 |
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
132-8900 Control Gp-Engine Electronic
| 13***00 | Control Group-Engine Electronic; -Rear Ecm-Front Ecm | 1 |
| 17***39 | Screw; (8-32x0.5-In) | 4 |
| 2L***75 | Terminal; (14-Ga To 16-Ga, No. 8 Screw)(Relay Switch "B" & "S") | 1 |
176-7503 Control Gp-Engine Electronic
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 17***03 | Control Group-Engine Electronic; -Rear Ecm-Front Ecm | 1 |
160-4891 Control Gp-Unprogrammed -Vims
| 10***95 | Battery & Wiring Group | 1 |
| 16***91 | Control Group-Unprogrammed; -Vims Main Module-Road Analysis Control | 1 |
| 21***10 | Software-Configuration | 1 |
168-7314 Control Gp-Unprogrammed -Product Link 201
| 16***14 | Control Group-Unprogrammed; -Product Link 201 | 1 |
172-9389 Control Gp-Unprogrammed -Power Train
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 17***89 | Control Group-Unprogrammed; -Steering, Transmission | 1 |
| 25***33 | Software Group-Monitor; (Vims, English, German) | 1 |
227-0185 Electrical Ar
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 22***85 | Electrical Ar | 1 |
| 25***34 | Software Group-Monitor; (Vims, English, Russian) | 1 |
158-7598 Electronics Gp-Engine Ratings
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 15***98 | Electronics Group-Engine Ratings | 1 |
| 25***35 | Software Group-Monitor; (Vims, English, Danish) | 1 |
254-4056 Electronics Gp-Monitor -Vims, English, French
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 25***42 | Software Group-Monitor; (Vims, English, Czechoslovakian) | 1 |
| 25***56 | Electronics Group-Monitor; -Vims, English, French | 1 |
254-4055 Electronics Gp-Monitor -Vims, English, Italian
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 25***41 | Software Group-Monitor; (Vims) | 1 |
| 25***55 | Electronics Group-Monitor; -Vims, English, Italian | 1 |
254-4060 Electronics Gp-Monitor -Vims, English, Norwegian
| 25***60 | Electronics Group-Monitor; -Vims, English, Norwegian | 1 |
| 31***01 | Software Group-Power Train | 1 |
| 31***02 | Service Group-Power Train, Name-Plate (Warning) | 1 |
254-4052 Electronics Gp-Monitor -Vims, English, Danish
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 25***38 | Software Group-Monitor; (Vims, English, Italian) | 1 |
| 25***52 | Electronics Group-Monitor; -Vims, English, Danish | 1 |
254-4061 Electronics Gp-Monitor -Vims, English, Finnish
| 15***61 | Boss | 2 |
| 18***64 | Angle As | 1 |
| 18***21 | Plate As | 3 |
254-4059 Electronics Gp-Monitor -Vims, English, Czechoslovakian
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 25***45 | Software Group-Monitor; (Vims, English, Icelandic) | 1 |
| 25***59 | Electronics Group-Monitor; -Vims, English, Czechoslovakian | 1 |
254-4062 Electronics Gp-Monitor -Vims, English, Icelandic
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 22***82 | Tube As | 1 |
| 25***62 | Electronics Group-Monitor; -Vims, English, Icelandic | 1 |
254-4050 Electronics Gp-Monitor -Vims, English, German
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 25***36 | Software Group-Monitor; (Vims, English, Greek) | 1 |
| 25***50 | Electronics Group-Monitor; -Vims, English, German | 1 |
254-4051 Electronics Gp-Monitor -Vims, English, Russian
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 25***37 | Software Group-Monitor; (Vims, English, Dutch) | 1 |
| 25***51 | Electronics Group-Monitor; -Vims, English, Russian | 1 |
254-4057 Electronics Gp-Monitor -Vims, English, Portuguese
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 25***43 | Software Group-Monitor; (Vims, English, Norwegian) | 1 |
| 25***57 | Electronics Group-Monitor; -Vims, English, Portuguese | 1 |
254-4053 Electronics Gp-Monitor -Vims, English, Greek
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 25***39 | Software Group-Monitor; (Vims, English, French) | 1 |
| 25***53 | Electronics Group-Monitor; -Vims, English, Greek | 1 |
254-4058 Electronics Gp-Monitor -Vims, English, Swedish
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 25***44 | Software Group-Monitor; (Vims, English, Finnish) | 1 |
| 25***58 | Electronics Group-Monitor; -Vims, English, Swedish | 1 |
254-4054 Electronics Gp-Monitor -Vims, English, Dutch
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 25***40 | Software Group-Monitor; (Vims, English, Portuguese) | 1 |
| 25***54 | Electronics Group-Monitor; -Vims, English, Dutch | 1 |
229-2721 Electronics Gp-Power Train
| 10***83 | Heater Group-Fuel-Coolant | 1 |
| 22***21 | Electronics Group-Power Train | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
223-4928 Enclosure Gp-Electronics Bay
| 22***28 | Enclosure Group-Electronics Bay | 1 |
| 6N***04 | Cap As-Dust; (Jacket Water Heater Elements) | 2 |
| 9G***55 | Element As-Jacket Water Heater; (120-Volt, 1500-Watt) | 2 |
228-9252 Fastener Gp-Electronics
| 22***52 | Fastener Group-Electronics | 1 |
| 4N***27 | Cord As-Heater Element; -Jacket Water | 2 |
| 6N***04 | Cap As-Dust; (Jacket Water Heater Elements) | 2 |
245-3343 Heater Ar-Fuel
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 24***43 | Heater Ar-Fuel | 1 |
3e-6389 Lamp Gp-Dome -With Switch
| 15***49 | Lens As; (Headlight, High Beam) | 1 |
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
147-0319 Lamp Gp-Flood
| 14***19 | Lamp Group-Flood; -Engine Work, Rh, Lh | 1 |
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
153-2073 Lamp Gp-Flood
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***73 | Lamp Group-Flood; -Cab-Extended Bolster-Rear-Blade-Moldboard | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
161-0908 Lamp Gp-Head -Low Beam
| 16***08 | Lamp Group-Head; -Fog Light | 1 |
| 17***69 | Lighting Group-Flood; -4-Lamp, Rear | 1 |
| 22***08 | Lighting Group-Flood; -4-Lamp, Rops, Front, Rear | 1 |
157-0305 Lamp Gp-Head -High Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***05 | Lamp Group-Head; -High Beam | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
135-0426 Lamp Gp-Signal -Stop, Tail
| 13***26 | Lamp Group-Signal; (24-Volt, Stop, Tail)(Stop/Tail) | 1 |
| 21***22 | Switch As-Rocker; (Warning Beacon) | 1 |
| 22***60 | Lighting Group-Warning Beacon | 1 |
235-3937 Lamp Gp-Warning Beacon -Amber, Rotating
| 11***68 | Guard As | 1 |
| 14***88 | Bracket As | 1 |
| 16***08 | Lamp Group-Head; -Fog Light | 1 |
227-4541 Lighting Ar-Stop & Flood
| 11***17 | Bracket | 1 |
| 14***88 | Bracket As | 4 |
| 15***73 | Lamp Group-Flood; -Cab-Extended Bolster-Rear-Blade-Moldboard | 4 |
231-7267 Lighting Ar-Warning Beacon
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 7 |
| 15***65 | Kit-Connecting Plug; (8-Pin)(Electronic Control Channel) | 1 |
| 15***05 | Lamp Group-Head; -High Beam | 4 |
176-4161 Lighting Gp-Auxiliary -Front, Inside Position
| 14***88 | Bracket As | 1 |
| 14***19 | Lamp Group-Flood; -Engine Work, Rh, Lh | 1 |
| 17***61 | Lighting Group-Auxiliary; -Front, Inside Position | 1 |
227-3015 Lighting Gp-Flood -Front, Outside Position
| 13***26 | Lamp Group-Signal; (24-Volt, Stop, Tail)(Stop/Tail) | 2 |
| 22***15 | Lighting Group-Flood; -Front, Outside Position | 1 |
| 23***52 | Spacer | 4 |
226-9608 Lighting Gp-Flood -4-Lamp, Rops, Front, Rear
| 15***05 | Lamp Group-Head; -High Beam | 4 |
| 17***94 | Bracket | 4 |
| 22***08 | Lighting Group-Flood; -4-Lamp, Rops, Front, Rear | 1 |
227-3756 Lighting Gp-Flood -4-Lamp, Front
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***96 | Bracket As | 1 |
173-8469 Lighting Gp-Flood -4-Lamp, Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***69 | Clip As-Connector; (3-Pin) | 2 |
290-0479 Lighting Gp-Flood
| 26***47 | Adapter | 1 |
| 26***48 | Sensor Group-Exhaust Temperature | 1 |
| 29***79 | Lighting Group-Flood | 1 |
8r-5645 Lighting Gp-Stop -2-Lamp, Rear
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 8R***45 | Lighting Group-Stop; -2-Lamp, Rear | 1 |
223-4260 Lighting Gp-Warning Beacon
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
| 22***60 | Lighting Group-Warning Beacon | 1 |
163-7882 Sensor Gp-Exhaust Temperature
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 16***82 | Sensor Group-Exhaust Temperature | 1 |
266-1466 Sensor Gp-Position
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 26***66 | Sensor Group-Position; -Throttle | 1 |
214-4863 Sensor Gp-Position
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 21***63 | Sensor Group-Position; -Rotary-Tc Impeller Clutch, Lh Pedal | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
204-7949 Sensor Gp-Position
| 20***49 | Sensor Group-Position; -Throttle | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
167-1709 Sensor Gp-Pressure
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***09 | Sensor Group-Pressure; -Injection Actuation Oil | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
143-9176 Sensor Gp-Pressure -Implement Pump Oil
| 14***76 | Sensor Group-Pressure; -Implement Pump Oil | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
216-8684 Sensor Gp-Pressure -Torque Converter Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***49 | Strap; (Marker) | 1 |
194-6725 Sensor Gp-Pressure
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 3 |
161-9926 Sensor Gp-Pressure -Atmospheric Air, Turbo Inlet
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***26 | Sensor Group-Pressure; -Atmospheric Air, Turbo Inlet | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
194-6724 Sensor Gp-Pressure
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 19***24 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
100-4311 Sensor Gp-Pressure
| 10***11 | Sensor Group-Pressure | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 9X***13 | Sleeve (Order By cm)(Use As Required) | 0 |
224-8497 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***49 | Strap; (Marker) | 1 |
| 22***97 | Sensor Group-Pressure | 1 |
129-6628 Sensor Gp-Speed -Engine Timing
| 11***66 | Seal-O-Ring | 1 |
| 12***28 | Sensor Group-Speed; -Engine Speed/Timing | 1 |
| 13***07 | Washer; (21.1x28.1x0.9-mm Thk) | 1 |
193-2550 Sensor Gp-Speed
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 19***50 | Sensor Group-Speed; -Tmsn, Torque Converter Output | 1 |
189-5746 Sensor Gp-Speed
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 18***46 | Sensor Group-Speed; -Low Output-Engine Timing-Transmission | 1 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
273-5041 Sensor Gp-Speed
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 27***41 | Sensor Group-Speed; -Engine Timing | 1 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
102-2240 Sensor Gp-Temperature
| 10***40 | Sensor Group-Temperature; -Output Transfer Gear Oil | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***73 | Valve As-Ether Start | 1 |
118-3909 Sensor Gp-Temperature -Ambient Air
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 11***09 | Sensor Group-Temperature; -Ambient Air | 1 |
| 12***57 | Tube | 2 |
100-3055 Sensor Gp-Temperature -Axle, Implement, Tc Oil
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 12***53 | Harness As-Starting Aid | 1 |
| 13***91 | Starting Aid Group-Ether | 1 |
136-6338 Starting Aid Gp-Ether
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
109-6911 Starting Aid Gp-Ether
| 10***11 | Starting Aid Group-Ether | 1 |
| 11***91 | Cable As | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
130-3591 Starting Aid Gp-Ether
| 12***47 | Spacer; (17x30x20-mm Thk) | 6 |
| 13***91 | Starting Aid Group-Ether | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 2 |
164-7577 Switch Gp-Bypass -Power Train Oil Filter
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
| 2S***18 | Screw-Machine; (6-32x0.625-In) | 2 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 2 |
7n-0719 Switch Gp-Disconnect -Battery
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 3 |
183-3862 Switch Gp-Flow -Coolant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***62 | Switch Group-Flow; -Coolant | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
3e-8680 Switch Gp-Handle
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 3E***80 | Switch Group-Handle; -Dual Tilt Control, Tip Control | 1 |
171-3759 Switch Gp-Limit
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***59 | Switch Group-Limit; -Brake Pedal, Xmsn Mdl Cont | 1 |
172-8660 Switch Gp-Liquid Level
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
3e-0075 Switch Gp-Magnetic -Start Relay
| 22***69 | Switch As-Rocker; (Torque Converter Lockup Clutch) | 1 |
| 3E***75 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
175-2324 Switch Gp-Magnetic -Start Relay
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***86 | Wiper Switch Assembly; (24-Volt)(Front/Intermittent) | 1 |
| 17***24 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
175-2322 Switch Gp-Magnetic -Start Relay
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 17***22 | Switch Group-Magnetic; -Air Inlet Heater, Start Relay | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
132-3612 Switch Gp-Rocker -Torque Converter Lockup Clutch
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 13***12 | Switch Group-Rocker; -Torque Converter Lockup Clutch | 1 |
158-6634 Switch Gp-Toggle
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 3 |
3e-0155 Switch Gp-Wiper -Intermittent-Front
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
252-0541 Warning Gp-Backup
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***98 | Plate | 2 |
| 20***36 | Plate | 1 |
227-0958 Wiring Gp-Cab
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 19 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
222-4102 Wiring Gp-Electronics Bay
| 03***48 | Clip; (11.11mm .437in Id) | 12 |
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
222-4098 Wiring Gp-Electronics Bay
| 03***41 | Elbow; (7/16-20 Str Thd) | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 19 |
217-7059 Wiring Gp-Engine
| 03***48 | Clip; (11.11mm .437in Id) | 4 |
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 3 |
| 10***45 | Clip | 1 |
227-4774 Wiring Gp-Front
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 10***11 | Sensor Group-Pressure | 1 |
248-4143 Wiring Gp-Machine
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 10***11 | Sensor Group-Pressure | 1 |
248-4142 Wiring Gp-Power Train
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***10 | Plate | 1 |
226-7672 Wiring Gp-Rear
| 0A***21 | Clip | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
289-1479 Wiring Gp-Rops
| 0A***21 | Clip | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
226-7670 Wiring Gp-Shutoff -Bumper
| 10***00 | Axle Group-Fixed; -Front | 1 |
| 11***04 | Differential & Bevel Gear Group; -Front, Rear Axle | 1 |
| 16***98 | Wheel Group-Final Drive & Brake | 2 |
173-8464 Wiring Gp-Shutoff -Ground Level
| 03***48 | Clip; (11.11mm .437in Id) | 8 |
| 0A***21 | Clip | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
248-4145 Wiring Gp-Vims
| 10***06 | Dowel-Hollow; (35.0 Odx45.0mm Oal) | 12 |
| 10***96 | Shaft-Axle | 2 |
| 11***47 | Housing As | 1 |
Engine Arrangement
217-7092 Engine Ar
| 10***80 | Pump Group-Fuel Injection | 8 |
| 10***36 | Crankshaft Group | 1 |
| 10***30 | Cylinder Head Group | 8 |
161-1550 Installation Ar-Engine
| 11***02 | Support Group-Engine | 1 |
| 11***03 | Muffler Group | 1 |
| 11***04 | Extension Group-Drain | 1 |
Frame And Body
210-2665 Cover Gp-Access -Front Frame
| 11***70 | Channel As | 2 |
| 11***47 | Bracket As | 1 |
| 15***80 | Washer-Hard; (26x44x22-mm Thk) | 16 |
160-1545 Door Gp-Access -Side
| 11***46 | Bracket As | 1 |
| 15***80 | Washer-Hard; (26x44x22-mm Thk) | 12 |
| 16***45 | Door Group-Access; -Side | 1 |
131-8125 Drawbar Gp
| 13***25 | Drawbar Group | 1 |
| 20***48 | Cover | 1 |
| 20***50 | Enclosure As | 1 |
201-4768 Enclosure Gp-Hydraulic Tank -Lh
| 09***47 | Block | 1 |
| 11***36 | Post As-Lh | 1 |
| 11***05 | Support As | 1 |
109-6847 Enclosure Gp-Hydraulic Tank -Rh
| 10***47 | Enclosure Group-Hydraulic Tank; -Rh | 1 |
| 16***91 | Ladder Group | 1 |
| 17***07 | Rivet-Pop | 22 |
109-6908 Enclosure Gp-Hydraulic Tank -Lh
| 10***08 | Enclosure Group-Hydraulic Tank; -Lh | 1 |
| 19***69 | Washer; (22x40x10-mm Thk) | 16 |
| 21***93 | Fender As-Front; (Rh) | 1 |
210-7340 Fender Gp
| 12***63 | Plate | 4 |
| 17***03 | Bar | 1 |
| 21***40 | Fender Group | 1 |
109-6845 Fender Gp-Front
| 09***47 | Block | 10 |
| 10***50 | Plate | 4 |
| 10***44 | Boss; (M10x1.5x60-mm) | 1 |
246-3370 Firewall Gp
| 10***82 | Bolt-Self-Locking; (M16x2x45-mm) | 12 |
| 14***26 | Guard As | 1 |
| 17***24 | Guard | 2 |
195-9980 Frame As-Front
| 11***16 | Guard As | 1 |
| 13***66 | Plate | 2 |
| 19***80 | Frame As-Front | 1 |
167-7460 Frame As-Rear
| 09***47 | Block | 2 |
| 16***60 | Frame As-Rear | 1 |
| 16***46 | Grill As; (Top)(Top) | 1 |
144-6222 Guard Gp-Crankcase
| 11***29 | Panel As | 1 |
| 11***40 | Plate As | 1 |
| 12***16 | Panel As-Rh | 1 |
109-6856 Guard Gp-Power Train
| 10***56 | Guard Group-Power Train | 1 |
| 29***30 | Handrail As | 1 |
| 30***06 | Handrail As; (Rh) | 1 |
169-6826 Guard Gp-Radiator
| 11***80 | Plate | 4 |
| 16***26 | Guard Group-Radiator | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 20 |
301-5804 Handrail Gp -Front
| 11***42 | Shield As-Bottom | 1 |
| 11***44 | Panel As; (Lh) | 1 |
| 11***45 | Panel As; (Rh) | 1 |
153-9050 Handrail Gp
| 08***33 | Cap | 1 |
| 10***75 | Bolt; (M20x2.5x60-mm) | 12 |
| 11***92 | Shim Pack; (Includes 26-Shims)(Includes 26 Shims) | 1 |
301-5805 Hardware Gp-Handrail Mounting
| 11***00 | Ladder As | 1 |
| 11***06 | Handrail As | 1 |
| 12***68 | Bracket As | 2 |
8r-5637 Hitch Gp-Articulating
| 11***00 | Ladder As | 1 |
| 11***06 | Handrail As | 1 |
| 12***68 | Bracket As | 2 |
174-9164 Hood & Guard Gp
| 11***70 | Panel As | 1 |
| 12***68 | Bracket As | 2 |
| 15***52 | Support As | 1 |
160-0291 Ladder Gp
| 16***91 | Ladder Group | 1 |
| 18***62 | Lines Group-Grease | 1 |
| 1C***53 | Lines Group-Grease | 1 |
109-6851 Ladder Gp
| 10***51 | Ladder Group | 1 |
| 18***65 | Tube As | 1 |
| 18***66 | Tube As | 2 |
187-8624 Lines Gp-Grease
| 16***24 | Plate | 2 |
| 16***51 | Panel As-Lh | 1 |
| 16***52 | Panel As-Rh | 1 |
1c-7953 Lines Gp-Grease
| 12***19 | Link | 1 |
| 12***20 | Pin | 2 |
| 1C***53 | Lines Group-Grease | 1 |
180-1462 Lines Gp-Grease
| 09***96 | Shim; (1-mm Thk) | 8 |
| 12***80 | Cover | 2 |
| 13***25 | Drawbar Group | 1 |
109-6839 Link Gp-Steering Frame Lock
| 10***39 | Link Group-Steering Frame Lock | 1 |
| 12***76 | Cam-Latch | 1 |
| 17***81 | Latch Assem. | 1 |
170-1931 Mounting Gp-Bumper
| 11***58 | Plate | 4 |
| 13***52 | Step As | 3 |
| 13***54 | Bracket | 2 |
131-7808 Panel Gp-Hood -Side
| 11***58 | Plate | 4 |
| 13***08 | Panel Group-Hood; -Side | 1 |
| 13***54 | Bracket | 2 |
175-0223 Panel Gp-Hood -Front
| 11***42 | Support-Air Cleaner | 1 |
| 17***23 | Panel Group-Hood; -Front | 1 |
| 7M***74 | Element-Filter; (Air Cleaner - Air Lines) | 1 |
135-8640 Step Gp
| 11***41 | Support-Air Cleaner | 1 |
| 13***40 | Step Group | 1 |
| 7M***74 | Element-Filter; (Air Cleaner - Air Lines) | 1 |
160-7555 Step Gp
| 16***55 | Step Group | 1 |
| 17***64 | Wiring Group-Shutoff; -Ground Level | 1 |
| 17***92 | Bumper As-Rear | 1 |
289-2984 Step Gp
| 11***80 | Plate | 4 |
| 14***52 | Plate As | 1 |
| 23***52 | Sheet As | 1 |
135-3103 Support Gp-Air Inlet -Rh
| 13***03 | Support Group-Air Inlet; -Rh | 1 |
| 14***52 | Plate As | 1 |
| 23***52 | Sheet As | 1 |
135-3104 Support Gp-Air Inlet -Lh
| 06***35 | Valve-Gas | 1 |
| 11***10 | Protector-Gas Valve | 1 |
| 13***04 | Support Group-Air Inlet; -Lh | 1 |
230-5844 Tank & Bumper Ar-Fuel
| 06***35 | Valve-Gas | 1 |
| 11***10 | Protector-Gas Valve | 1 |
| 13***23 | Piston | 1 |
237-7944 Walkway Gp
| 00***01 | Ring-Retaining | 3 |
| 12***74 | Roller | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
Fuel System
285-1202 Adapter Gp-Fast Fill Fuel
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 14***90 | Elbow Group | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
235-6114 Adapter Gp-Fast Fill Fuel
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 3 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 3 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
112-6025 Filter Gp-Fuel
| 11***25 | Filter Group-Fuel | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 14***90 | Elbow Group | 1 |
245-3344 Fuel Ar-Conventional Fill
| 10***83 | Heater Group-Fuel-Coolant | 1 |
| 23***14 | Adapter Group-Fast Fill Fuel | 1 |
| 24***44 | Fuel Ar-Conventional Fill | 1 |
245-3341 Fuel Ar-Fast Fill
| 13***83 | Heater Group-Fuel-Coolant | 1 |
| 14***15 | Connector As | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
245-3342 Fuel Ar-Fast Fill -With Fuel Heater
| 06***93 | Bushing-Reducer; (1/2-14 Nptf) | 4 |
| 11***36 | Tube As | 1 |
| 12***30 | Tube As | 1 |
130-6383 Heater Gp-Fuel-Coolant
| 00***81 | Tee-Union; (Flared 37-Deg) | 1 |
| 03***64 | Elbow (90 Degrees) | 1 |
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
109-6883 Heater Gp-Fuel-Coolant
| 10***83 | Heater Group-Fuel-Coolant | 1 |
| 11***80 | Hose As | 1 |
| 12***33 | Hose As | 1 |
173-0082 Lines Gp-Fuel
| 10***37 | Grommet | 8 |
| 14***45 | Washer-Retaining | 4 |
| 15***48 | Clamp | 4 |
161-1575 Lines Gp-Fuel Injection
| 10***37 | Grommet | 8 |
| 14***45 | Washer-Retaining | 4 |
| 15***48 | Clamp | 4 |
156-9752 Manifold Gp-Fuel -Rh
| 15***52 | Manifold Group-Fuel; -Rh-Lh | 1 |
| 23***82 | Plug | 1 |
| 24***07 | Seal-O-Ring | 1 |
156-9751 Manifold Gp-Fuel -Lh
| 15***51 | Manifold Group-Fuel; -Lh-Rh | 1 |
| 19***84 | Seal-O-Ring | 1 |
| 22***90 | Injector Group-Fuel | 1 |
100-8780 Pump Gp-Fuel Injection
| 10***80 | Pump Group-Fuel Injection | 1 |
| 18***23 | Pump As-Fuel Priming | 1 |
| 7X***01 | Bolt-Plt; (1/4unc X 1 1/4) | 1 |
165-9154 Pump Gp-Fuel Priming
| 16***54 | Pump Group-Fuel Priming; -Manual | 1 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
| 1N***36 | Coupling-Drive | 1 |
313-7770 Pump Gp-Fuel Transfer
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***76 | Hose | 2 |
8n-6151 Pump Gp-Fuel Transfer
| 11***97 | Seal-Lip; (Inner) | 1 |
| 16***17 | Seal-Lip Type; (Outer) | 1 |
| 1W***03 | Gear As-Idler | 1 |
225-4260 Pump Gp-Fuel Transfer
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 5 |
123-6938 Shield Gp-Fuel Lines
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 6 |
| 11***76 | Hose | 2 |
| 11***86 | Hose As | 1 |
235-6101 Tank Gp-Fuel
| 03***12 | Screw-Forming; (10-24x0.5-In) | 4 |
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
235-6100 Tank Gp-Fuel
| 23***00 | Tank Group-Fuel | 1 |
| 23***02 | Tank As-Fuel; (Center) | 1 |
| 23***03 | Tank As-Fuel; (Lh) | 1 |
Hydraulic System
102-2064 Rotating Gp-Pump -Hydraulic Fan
| 10***64 | Rotating Group-Pump; -Hydraulic Fan | 1 |
| 13***63 | Tank Group-Hydraulic; -Implement & Hydraulic Fan | 1 |
| 22***12 | Valve-Breaker Relief; (Hydraulic Tank) | 1 |
194-0949 Cooler Gp-Hyd & Steering Oil
| 0L***29 | Bolt- 7.63 cm(3 In.) Long - Location "H" | 4 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 3 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
212-4173 Cylinder & Mtg Gp-Lift
| 0L***29 | Bolt- 7.63 cm(3 In.) Long - Location "H" | 4 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
155-4765 Cylinder & Valve Gp-Lift -Rh, Quick-Drop
| 15***21 | Insert | 4 |
| 15***65 | Cylinder & Valve Group-Lift; -Rh, Quick-Drop | 1 |
| 16***10 | Ring-Backup | 1 |
155-4763 Cylinder & Valve Gp-Lift -Lh, Quick-Drop
| 0L***29 | Bolt- 7.63 cm(3 In.) Long - Location "H" | 4 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
153-9939 Cylinder Gp-Lift -Quick-Drop, Lh
| 11***55 | Rod As | 1 |
| 15***54 | Bearing-Self-Aligning | 1 |
| 15***39 | Cylinder Group-Lift; -Quick-Drop, Lh | 1 |
153-9938 Cylinder Gp-Lift -Rh, Quick Drop
| 11***55 | Rod As | 1 |
| 15***54 | Bearing-Self-Aligning | 1 |
| 15***38 | Cylinder Group-Lift; -Rh, Quick Drop | 1 |
258-8660 Cylinder Gp-Tilt -Lh-Tilt, Tip Function
| 11***55 | Rod As | 1 |
| 15***54 | Bearing-Self-Aligning | 1 |
| 15***44 | Ring-Backup | 1 |
308-2462 Cylinder Gp-Tilt -Lh-Tilt, Tip Function
| 14***60 | Elbow Group | 2 |
| 16***51 | Hose As | 1 |
| 16***47 | Filter Group-Oil; -Axle Oil Clr, Systems Case Dr | 1 |
258-8661 Cylinder Gp-Tilt -Rh-Tilt, Tip Function
| 11***55 | Rod As | 1 |
| 15***54 | Bearing-Self-Aligning | 1 |
| 15***44 | Ring-Backup | 1 |
308-2464 Cylinder Gp-Tilt -Rh-Tilt, Tip Function
| 14***52 | Elbow As. | 1 |
| 14***57 | Elbow As. | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
174-8853 Filter & Lines Gp-Hydraulic -Case Drain
| 16***05 | Lines Group-Hydraulic Fan | 1 |
| 16***06 | Control Group-Service Brake | 1 |
| 16***02 | Lines Group-Secondary Steering | 1 |
163-6494 Filter & Lines Gp-Hydraulic
| 14***57 | Elbow As. | 2 |
| 16***94 | Filter & Lines Group-Hydraulic; -Hydraulic Fan Motor Case Drain | 1 |
| 16***47 | Filter Group-Oil; -Axle Oil Clr, Systems Case Dr | 1 |
174-8194 Filter & Lines Gp-Hydraulic
| 10***84 | Lines Group-Steering Neutralizer | 1 |
| 13***31 | Lines Group-Service Brake | 1 |
| 16***64 | Lines Group-Hydraulic Fan | 1 |
229-5050 Hydraulic Ar -Secondary Steering, Deluxe Filtration
| 14***70 | Hose As | 1 |
| 14***72 | Hose As | 1 |
| 15***46 | Adapter-Hose | 1 |
229-5049 Hydraulic Ar -Secondary Steering, Standard Filtration
| 15***46 | Adapter-Hose | 1 |
| 16***77 | Plug As | 2 |
| 17***40 | Bracket As | 1 |
229-5016 Hydraulic Ar
| 16***00 | Lines Group-Hydraulic Fan | 1 |
| 16***01 | Control Group-Service Brake | 1 |
| 16***04 | Lines Group-Secondary Steering | 1 |
175-9011 Lines Gp-Hydraulic
| 11***02 | Manifold | 1 |
| 11***03 | Bracket | 1 |
| 11***29 | Filter Group-Oil; -Steering, Implement, Pilot | 1 |
212-5806 Lines Gp-Hydraulic
| 11***04 | Hose As | 1 |
| 11***05 | Hose As | 1 |
| 11***73 | Bracket As | 1 |
175-9010 Lines Gp-Hydraulic
| 14***31 | Bracket As | 1 |
| 15***46 | Adapter-Hose | 1 |
| 17***10 | Lines Group-Hydraulic | 1 |
163-6564 Lines Gp-Hydraulic Fan
| 11***17 | Clip | 1 |
| 14***53 | Hose As; (Hose E) | 1 |
| 14***54 | Hose As; (Hose A) | 1 |
163-6505 Lines Gp-Hydraulic Fan
| 14***59 | Hose As; (Hose A,B) | 2 |
| 14***60 | Hose As; (Hose C,D) | 2 |
| 14***62 | Hose As; (Hose E) | 1 |
163-6500 Lines Gp-Hydraulic Fan
| 08***44 | Spacer; (13.3x21.3x25-mm Thk) | 4 |
| 10***12 | Valve Group-Makeup; -Hydraulic Fan Motor | 1 |
| 10***86 | Elbow | 1 |
212-2132 Lines Gp-Lift Cylinder
| 14***64 | Hose As | 1 |
| 14***67 | Hose As | 1 |
| 14***68 | Hose As | 1 |
213-3481 Lines Gp-Pilot
| 14***57 | Hose As | 4 |
| 14***58 | Hose As | 4 |
| 1P***76 | Flange-Half (Hose To Pump); Flange-Half (32.54mm Bore) | 24 |
211-2675 Lines Gp-Tilt Cylinder
| 20***54 | Manifold | 1 |
| 21***75 | Lines Group-Tilt Cylinder | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
213-3272 Lines Gp-Tilt Cylinder
| 11***66 | Head | 1 |
| 13***73 | Bolt-Socket Head; (M16x2x35-mm) | 6 |
| 17***05 | Rotating Group-Motor; -Hydraulic Fan | 1 |
213-0108 Manifold Gp-Hydraulic
| 16***26 | Plunger | 2 |
| 1J***69 | Insert-Piston | 2 |
| 21***08 | Manifold Group-Hydraulic | 1 |
159-7166 Motor Gp-Piston -Hydraulic Fan
| 15***66 | Motor Group-Piston; -Hydraulic Fan | 1 |
| 16***26 | Plunger | 2 |
| 1J***69 | Insert-Piston | 2 |
316-6386 Piston Gp-Hydraulic Cylinder
| 1C***58 | Pump & Mtg Group-Implement Pilot | 1 |
| 21***52 | Pump & Mtg Group-Implement | 1 |
| 31***86 | Piston Group-Hydraulic Cylinder | 1 |
258-8664 Piston Gp-Hydraulic Cylinder
| 11***88 | Adapter-Spline | 1 |
| 14***13 | Adapter Group | 1 |
| 15***45 | Adapter-Pump | 1 |
242-5447 Pump & Mtg Gp-Implement
| 09***95 | Pin, Dowel | 1 |
| 10***41 | Ring-Snap | 1 |
| 13***89 | Kit-Seal | 1 |
212-6252 Pump & Mtg Gp-Implement
| 1C***26 | Adapter-Spline | 1 |
| 1C***27 | Adapter-Pump | 1 |
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 1 |
1c-7958 Pump & Mtg Gp-Implement Pilot
| 07***52 | Ring-Retaining | 2 |
| 12***41 | Plate-Pressure | 2 |
| 16***77 | Dowel | 4 |
4z-6291 Pump Gp-Gear -Implement Pilot
| 00***12 | Cup-Roller Bearing | 1 |
| 00***63 | Ring | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
227-9383 Pump Gp-Gear -Implement
| 11***65 | Plate | 1 |
| 11***18 | Screw; (M8x20-mm) | 7 |
| 12***99 | Plate-Port | 1 |
186-2821 Pump Gp-Piston -Hydraulic Fan
| 10***10 | Plate | 2 |
| 10***11 | Plate-Spacer | 2 |
| 10***61 | Barrel-Cylinder | 1 |
178-4005 Rotating Gp-Motor -Hydraulic Fan
| 16***01 | Swashplate Stop | 2 |
| 17***05 | Rotating Group-Motor; -Hydraulic Fan | 1 |
| 1H***37 | Pin (Spring) | 2 |
169-3290 Swashplate Gp -Steering
| 16***90 | Swashplate Group; -Variable | 1 |
| 19***01 | Tank Group-Hydraulic; -Steering & Brake | 1 |
| 22***12 | Valve-Breaker Relief; (Hydraulic Tank) | 1 |
220-6358 Tank & Mtg Gp-Hydraulic
| 11***58 | Cover As | 1 |
| 11***75 | Baffle As | 1 |
| 12***58 | Bolt-Mounting; (1/2-20x1.75-In) | 2 |
220-6359 Tank & Mtg Gp-Hydraulic
| 11***81 | Cover-Hydraulic Cap | 1 |
| 11***93 | Screen; (Hydraulic) | 2 |
| 12***58 | Bolt-Mounting; (1/2-20x1.75-In) | 2 |
139-2763 Tank Gp-Hydraulic -Implement & Hydraulic Fan
| 11***04 | Bracket As | 1 |
| 12***15 | Elbow | 1 |
| 13***63 | Tank Group-Hydraulic; -Implement & Hydraulic Fan | 1 |
197-1401 Tank Gp-Hydraulic -Steering & Brake
| 11***70 | Clip As-Connect; (4-Pin) | 1 |
| 15***48 | Support As | 1 |
| 15***49 | Plate As-Mounting | 1 |
205-7803 Valve & Mtg Gp-Hydraulic Fan
| 11***72 | Valve Group-Relief; -Steering, Implement, Pilot | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 20***03 | Valve & Mtg Group-Hydraulic Fan | 1 |
178-2967 Valve & Mtg Gp-Main Control
| 17***67 | Valve & Mtg Group-Main Control | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 8M***05 | Adapter; (-8 Orb -8 Jic) (Brake Port) | 1 |
133-7455 Valve & Mtg Gp-Pilot Relief
| 13***55 | Valve & Mtg Group-Pilot Relief | 1 |
| 18***95 | Valve Group-Solenoid; -Demand Fan | 1 |
| 3E***84 | Manifold | 1 |
4t-2698 Valve Gp-Check -Air Purge
| 00***03 | Seal-O-Ring | 1 |
| 14***95 | Plug As | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
191-8735 Valve Gp-Demand Fan
| 10***76 | Body | 1 |
| 19***35 | Valve Group-Demand Fan; (Fan Reversing) | 1 |
| 1U***22 | Bearing-Sleeve; (12.65mm Id) | 1 |
157-0045 Valve Gp-Main Control
| 15***45 | Valve Group-Main Control | 1 |
| 2K***99 | Seal-Interface Between Inlet Manifold | 2 |
| 3G***96 | Valve Group-Pilot; (Tilt & Tip) | 1 |
101-9012 Valve Gp-Makeup -Hydraulic Fan Motor
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 10***12 | Valve Group-Makeup; -Hydraulic Fan Motor | 1 |
9t-7883 Valve Gp-Pilot -Tilt, Tip
| 4J***01 | Sleeve | 1 |
| 6B***63 | Washer-- Motor To Flywheel Housing | 1 |
| 7F***68 | Seal-O-Ring; (Engine Oil Filler Cap) | 1 |
189-1645 Valve Gp-Pump Control -Pressure, Flow Compensator-Hydraulic Fan
| 13***15 | Manifold | 1 |
| 15***53 | Valve Group-Relief; -Steering, Implement, Pilot | 1 |
| 18***45 | Valve Group-Pump Control; -Pressure, Flow Compensator-Hydraulic Fan | 1 |
9t-5653 Valve Gp-Quick-Drop
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
156-4253 Valve Gp-Relief -Steering, Implement, Pilot
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***48 | Kit-Seal; (Solenoid Valve) | 1 |
| 15***53 | Valve Group-Relief; -Steering, Implement, Pilot | 1 |
114-4672 Valve Gp-Relief -Steering, Implement, Pilot
| 03***39 | Seal-O-Ring (Id=9.25mm) | 1 |
| 11***72 | Valve Group-Relief; -Steering, Implement, Pilot | 1 |
| 6E***81 | Ring-Backup; (9.715mm Id) | 2 |
4t-4073 Valve Gp-Shuttle
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 18***24 | Adapter As | 1 |
183-7595 Valve Gp-Solenoid -Demand Fan
| 15***16 | Push Arm Group; -Rh | 1 |
| 15***17 | Push Arm Group; -Lh | 1 |
| 15***20 | Trunnion Group-Bulldozer | 1 |
3e-9205 Valve Gp-Solenoid
| 16***77 | Plug As | 1 |
| 17***93 | Plug As | 4 |
| 1P***76 | Flange-Half (Hose To Pump); Flange-Half (32.54mm Bore) | 6 |
225-2321 Valve Gp-Tilt Control -Dual
| 15***12 | Link As | 1 |
| 22***21 | Valve Group-Tilt Control; -Dual | 1 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 8 |
Implements
214-7136 Bulldozer Ar
| 12***81 | Connector As | 2 |
| 1J***04 | Bearing (4.125" O.D.) | 4 |
| 21***36 | Bulldozer Ar | 1 |
153-0310 Link Gp-Stabilizer
| 15***18 | Push Arm As; (Rh) | 1 |
| 15***10 | Link Group-Stabilizer | 1 |
| 1J***04 | Bearing (4.125" O.D.) | 2 |
214-7893 Pin Gp-Bulldozer
| 15***18 | Push Arm As; (Rh) | 1 |
| 1J***04 | Bearing (4.125" O.D.) | 2 |
| 1U***47 | Bracket Assem. | 1 |
151-5217 Push Arm Gp -Lh
| 11***02 | Boot | 2 |
| 15***17 | Push Arm Group; -Lh | 1 |
| 16***10 | Bracket As | 1 |
151-5216 Push Arm Gp -Rh
| 15***16 | Push Arm Group; -Rh | 1 |
| 15***19 | Push Arm As | 1 |
| 1J***04 | Bearing (4.125" O.D.) | 2 |
151-5220 Trunnion Gp-Bulldozer
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
Lubrication System
7w-2947 Pump & Lines Gp-Sump -Rear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 9 |
| 11***49 | Gasket | 1 |
101-0838 Breather Gp -Crankcase
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 1 |
| 10***38 | Breather Group; -Crankcase | 1 |
| 10***99 | Cover As | 1 |
149-3534 Breather Gp
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 6 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 6 |
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 1 |
112-6033 Filler Gp-Engine Oil
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
| 11***33 | Filler Group-Engine Oil | 1 |
| 13***31 | Tube | 1 |
1w-0714 Filter Gp-Engine Oil
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 12***76 | Tube As | 1 |
| 12***77 | Gauge As-Oil Level | 1 |
112-6001 Fumes Disposal Gp
| 06***56 | Seal-O-Ring | 4 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
119-6317 Gauge Gp-Oil Level (Dipstick)
| 03***36 | Tee-Flared | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
1w-0717 Lines Gp-Engine Oil
| 10***56 | Strap-Cable | 2 |
| 14***51 | Elbow Group | 1 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
112-6010 Lines Gp-Turbocharger Oil
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 11***10 | Lines Group-Turbocharger Oil | 1 |
| 1P***19 | Coupler (Use With .75 In Hose) | 1 |
246-5552 Metering Gp-Engine Oil -Oil Renewal System
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
127-4479 Oil Change Gp-High Speed
| 12***79 | Oil Change Group-High Speed | 1 |
| 29***87 | Seal-O-Ring | 1 |
| 4S***82 | Bolt 7.25 In. (18.42 cm) Long | 3 |
7w-0053 Pump Gp-Engine Oil -2-Section Gear
| 24***97 | Film-Instruction; (Oil Renewal System) | 1 |
| 24***52 | Metering Group-Engine Oil; -Oil Renewal System | 1 |
| 25***82 | Tank & Mtg Group-Engine Oil; -Metering, Oil Renewal System | 1 |
7n-8715 Pump Gp-Engine Oil -2-Section Gear
| 05***79 | Washer; (13.5x44.45x10-mm Thk) | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
8n-9164 Pump Gp-Scavenge -1-Section Gear
| 13***00 | Clip; (Tab) | 1 |
| 14***41 | Connector Group | 1 |
| 24***40 | Tank Group-Engine Oil; -Metering, Oil Renewal System | 1 |
249-7583 Renewal Ar-Oil
| 14***90 | Elbow Group | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 24***41 | Tank As; (Oil Renewal System) | 1 |
250-1182 Tank & Mtg Gp-Engine Oil -Metering, Oil Renewal System
| 08***22 | Adaptor O.R.F.S. | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
246-3340 Tank Gp-Engine Oil -Metering, Oil Renewal System
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 3 |
| 24***40 | Tank Group-Engine Oil; -Metering, Oil Renewal System | 1 |
| 7E***16 | Gasket | 1 |
235-0266 Valve Gp-Metering -Oil Renewal System
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 10***32 | Seal-O-Ring | 2 |
| 12***42 | Core As-Oil Cooler; (Engine) | 1 |
Machine Arrangement
227-8944 Chassis Ar
| 10***39 | Link Group-Steering Frame Lock | 1 |
| 10***44 | Platform Group-Operator | 1 |
| 10***45 | Fender Group-Front | 1 |
227-0207 Common Ar
| 16***50 | Installation Ar-Engine | 1 |
| 17***16 | Power Train Ar | 1 |
| 21***36 | Bulldozer Ar | 1 |
Operator Station
130-3597 Accumulator & Mtg Gp-Refrig
| 13***97 | Accumulator & Mtg Group-Refrig | 1 |
173-1028 Adjuster Gp-Seat
| 12***14 | Duct Group-Air | 1 |
| 17***28 | Adjuster Group-Seat; -Seat | 1 |
| 19***86 | Filter Group-Cab Air | 1 |
237-3970 Air Compressor Gp-Seat
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***95 | Valve As | 1 |
142-8114 Air Conditioner Ar
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 4 |
| 03***38 | Clamp | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
247-4951 Air Conditioner Gp
| 13***88 | Clip | 3 |
| 13***90 | Nozzle As-Washer | 1 |
| 19***21 | Bolt-Socket Head; (M6x1x25-mm) | 4 |
123-8576 Air Conditioner Gp
| 12***76 | Air Conditioner Group | 1 |
| 13***88 | Clip | 3 |
| 13***90 | Nozzle As-Washer | 1 |
214-7636 Arm Gp-Window Wiper -Front
| 12***24 | Cab Group | 1 |
| 12***25 | Platform Group-Cab | 1 |
| 12***01 | Door Group-Lh; -Lh | 1 |
214-7635 Arm Gp-Window Wiper -Front
| 16***27 | Mat | 1 |
| 16***28 | Plate As | 1 |
| 16***31 | Sheet | 1 |
187-1755 Base Gp-Foot Brake -Pedal, Rh
| 11***37 | Door Group-Access | 1 |
| 11***26 | Cover As; (Rh) | 1 |
| 11***27 | Cover As; (Lh) | 1 |
187-1754 Base Gp-Foot Brake -Pedal, Lh
| 12***31 | Cover | 1 |
| 14***61 | Kit-Roller; (Foot Brake Control)(Governor Pedal) | 1 |
| 14***63 | Screw | 2 |
170-1556 Box Gp-Storage
| 11***73 | Control Group-Foot Brake | 1 |
| 11***63 | Pedal Group-Governor | 1 |
| 11***10 | Sealing Group-Glass | 1 |
123-7231 Cab & Platform Gp
| 09***08 | Seal; (29.5-Dm Each) | 0 |
| 10***43 | Seal; (32-cm Each) | 0 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 20 |
227-0955 Cab Ar
| 10***15 | Hinge-Rh | 2 |
| 11***88 | Glass; (Front) | 1 |
| 11***89 | Glass-Rh; (Right Front Quarter) | 1 |
123-7024 Cab Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***24 | Cab Group | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
123-7023 Cab Gp
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 1 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
170-1138 Compressor & Mtg Gp-Refrig
| 17***38 | Compressor & Mtg Group-Refrig | 1 |
| 19***23 | Condenser As-Refrigerant | 1 |
| 22***92 | Support | 1 |
218-0324 Compressor Gp-Refrigerant
| 14***77 | Plate | 1 |
| 14***78 | Boot | 1 |
| 16***26 | Lever As | 1 |
110-8685 Condenser & Mtg Gp-Refrigerant
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
177-3039 Control Gp-Handle -Lift, Tilt, Tip
| 09***14 | Hose As | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***71 | Harness As-Steering; (Stic Control)(Stic Control Jumper Harness) | 1 |
227-3197 Control Gp-Hydraulic Hand
| 17***13 | Control Group-Stic | 1 |
| 22***97 | Control Group-Hydraulic Hand | 1 |
| 4E***20 | Base | 1 |
166-5210 Control Gp-Steering
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***29 | Actuator | 1 |
| 10***73 | Grip | 1 |
177-4113 Control Gp-Stic
| 17***13 | Control Group-Stic | 1 |
| 4E***84 | Cover As | 2 |
| 4E***96 | Cover | 3 |
4e-8413 Control Gp-Stic
| 14***66 | Lever As-Stic Steer Lockout | 1 |
| 14***51 | Plate As | 1 |
| 14***52 | Plate As | 1 |
166-5211 Control Gp-Stic Lockout
| 11***03 | Door As | 2 |
| 11***51 | Hinge As | 4 |
| 16***11 | Control Group-Stic Lockout | 1 |
112-4837 Door Gp-Access
| 11***37 | Door Group-Access | 1 |
| 3E***00 | Seal; (580-cm) | 0 |
| 4E***05 | Handhold | 1 |
130-3589 Door Gp-Access
| 12***15 | Duct | 1 |
| 12***16 | Duct | 1 |
| 12***17 | Duct | 1 |
123-8701 Door Gp-Cab -Lh
| 12***01 | Door Group-Lh; -Lh | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 13***99 | Grommet | 1 |
123-8714 Duct Gp-Cab Air
| 12***14 | Duct Group-Air | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 13***99 | Grommet | 1 |
199-6186 Filter Gp-Cab Air
| 03***13 | Screw-Forming; (10-24x0.37-In) | 6 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***74 | Kit-Connecting Plug; (6-Pin)(Cat Electronic Display Harness) | 1 |
250-9455 Filter Gp-Cab Air
| 09***84 | Locknut; (M12x1.75-Thd) | 1 |
| 10***54 | Seal; (1040-cm) | 0 |
| 10***45 | Pin-Spring | 1 |
227-0956 Installation Gp-Radio
| 09***84 | Locknut; (M12x1.75-Thd) | 1 |
| 10***54 | Seal; (1040-cm) | 0 |
| 10***45 | Pin-Spring | 1 |
9u-2675 Mounting Gp-Antenna -Radio
| 3S***23 | Washer 5.7 cm(2.24 In.)O.D. | 40 |
| 8C***36 | Bolt; (M30x3.5x160-mm) | 40 |
| 9U***75 | Installation Group-Radio; -Radio | 1 |
131-1126 Latch Gp-Cab Door & Window
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
| 10***99 | Valve As; (Air Conditioner Refrigerant) | 1 |
| 12***11 | Hose As | 1 |
170-4752 Liner Gp-Cab
| 17***52 | Liner Group-Cab | 1 |
| 1V***22 | Tag-Identification; (Letters Spl) | 2 |
| 1V***23 | Tag-Identification; (Letters Ret) | 2 |
109-6863 Lines Gp-Air Conditioner
| 10***63 | Lines Group-Air Conditioner | 1 |
| 5P***79 | Mirror - Two Point Mount | 1 |
| 5P***68 | Clip (Slot-For Use On 52 mm Od Tube) | 2 |
229-5134 Lines Gp-Cab Heater
| 12***22 | Angle | 4 |
| 16***90 | Bracket As; (Rh) | 1 |
| 16***91 | Bracket As; (Lh) | 1 |
143-3604 Mirror Gp-Rear View
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***68 | Board Assembly | 1 |
| 14***04 | Mirror Group-Rear View | 1 |
106-4143 Mirror Gp-Rear View
| 10***43 | Mirror Group-Rear View | 3 |
109-6885 Mirror Gp-Rear View
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***85 | Mirror Group-Rear View | 1 |
179-1730 Module Gp-Message Center -Vims
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***68 | Board Assembly | 1 |
| 17***30 | Module Group-Message Center; -Vims-Vids | 1 |
297-1401 Module Gp-Monitor Keypad
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
149-3255 Module Gp-Monitor Keypad -Vims
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***55 | Module Group-Monitor Keypad; -Vims | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 6 |
166-6928 Module Gp-Quad Gauge
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 16***28 | Module Group-Quad Gauge; -Engine Coolant Temp, Transmission Oil Temp, Hydraulic Oil Temp, Fuel Level | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
190-3445 Motor Gp-Window Wiper -Front Quarter, Rh
| 13***22 | Cable As-Coaxial | 1 |
| 19***45 | Motor Group-Window Wiper; -Right Front Quarter | 1 |
| 7K***81 | Strap-Pressure & Return Hoses To | 1 |
185-2154 Motor Gp-Window Wiper -24-Volt-Front
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***54 | Motor Group-Window Wiper; -24-Volt-Front | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
190-3446 Motor Gp-Window Wiper -Front Quarter, Lh
| 11***57 | Support As | 2 |
| 11***58 | Support As | 2 |
| 19***46 | Motor Group-Window Wiper; -Front Quarter, Lh | 1 |
155-5784 Motor Gp-Window Wiper -Rear
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
| 15***84 | Motor Group-Window Wiper; -24-Volt | 1 |
130-6907 Cover Gp-Cab
| 11***63 | Door As | 1 |
| 11***67 | Door As | 1 |
| 11***51 | Hinge As | 4 |
109-6852 Mounting Gp-Platform
| 10***52 | Mounting Group-Platform | 1 |
| 12***23 | Cab Group | 1 |
| 13***07 | Mounting Group-Cab | 1 |
247-3069 Mounting Gp-Rops
| 13***43 | Plate As-Lumbar | 1 |
| 16***83 | Knob-Lumbar | 1 |
| 17***30 | Pan As-Backrest | 1 |
227-0960 Operator Ar
| 13***43 | Plate As-Lumbar | 1 |
| 16***83 | Knob-Lumbar | 1 |
| 22***60 | Operator Ar | 1 |
178-7911 Pan Gp-Backrest -Cloth
| 10***68 | Bezel | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***54 | Plate | 1 |
292-9241 Pan Gp-Backrest
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
227-0957 Panel Gp-Instrument
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
227-0948 Panel Gp-Instrument -Front
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
113-4799 Pedal Gp-Governor
| 11***99 | Pedal Group-Governor | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
112-5763 Pedal Gp-Governor
| 11***63 | Pedal Group-Governor | 1 |
| 12***26 | Platform As | 1 |
| 4E***95 | Door As | 1 |
123-7025 Platform Gp-Operator
| 12***25 | Platform Group-Cab | 1 |
| 19***54 | Sleeve | 1 |
109-6844 Platform Gp-Operator
| 10***44 | Platform Group-Operator | 1 |
| 24***52 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
232-2597 Precleaner Gp-Cab Air
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
248-4152 Radio Gp -Am/Fm/Wb/Cd Player
| 10***38 | Rops Group | 1 |
| 24***52 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
| 28***79 | Wiring Group-Rops | 1 |
331-5291 Radio Gp -Am/Fm/Wb/Cd Player
| 10***63 | Bracket-Rear | 2 |
| 10***48 | Bracket | 2 |
| 10***51 | Guide | 1 |
284-4739 Radio Gp -Am/Fm/Wb/Cd Player
| 11***35 | Canopy As | 1 |
| 23***66 | Cover As | 1 |
| 24***75 | Plate | 1 |
210-2270 Recliner Gp-Seat
| 21***70 | Recliner Group-Seat; -Cloth | 1 |
| 31***98 | Adhesive | 1 |
247-3065 Rops Ar
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
109-6838 Rops Gp
| 09***43 | Pin-Cotter | 2 |
| 10***38 | Rops Group | 1 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
9u-0684 Screen Gp-Sun
| 0T***44 | Bolt (1.25" Long) | 1 |
| 11***91 | Rod | 1 |
| 17***37 | Spacer; (11.7x19.8x20.3-mm Thk)(Lh Seat Side) | 1 |
117-1410 Sealing Gp-Glass
| 11***10 | Sealing Group-Glass | 1 |
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 0 |
178-7910 Seat Gp -Cloth
| 13***41 | Shim; (0.20mm Thick) | 2 |
| 17***94 | Bracket As | 1 |
| 17***95 | Bracket As; (Rh) | 1 |
185-9726 Seat Gp -Cloth
| 16***10 | Bolt; (M10x1.5x70-mm) | 4 |
| 17***83 | Bracket As; (Lh) | 1 |
| 17***05 | Bracket As | 1 |
219-8090 Seat Gp-Suspension
| 01***02 | Lockwasher | 1 |
| 09***58 | Screw-Machine; (M6x1x14-mm) | 1 |
| 09***47 | Nut-Thin; (M16x2 Thd) | 1 |
131-0441 Spring Gp-Cab Door
| 10***03 | Fastener | 33 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
178-3111 Support Gp-Hydraulic Control
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
| 17***11 | Support Group-Hydraulic Control | 1 |
| 4E***99 | Harness As-Window Wiper; (And Window Washer) | 1 |
178-3904 Support Gp-Seat
| 17***04 | Support Group-Seat | 1 |
| 24***21 | Reservoir | 1 |
| 7T***90 | Pump As; (Washer) | 4 |
171-3897 Support Gp-Steering Control
| 15***79 | Wiper Arm Pivot Group | 2 |
| 15***84 | Motor Group-Window Wiper; -24-Volt | 1 |
| 17***97 | Support Group-Steering Control | 1 |
277-8032 Suspension Gp-Seat -Air
| 14***95 | Hose; (650-cm Each) | 0 |
| 15***79 | Wiper Arm Pivot Group | 2 |
| 15***84 | Motor Group-Window Wiper; -24-Volt | 1 |
242-1915 Washer Gp-Window
| 10***31 | Bit-End-Rh | 1 |
| 10***32 | Bit-End-Lh | 1 |
| 24***15 | Washer Group-Window | 1 |
9u-0351 Washer Gp-Window
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 14***95 | Hose; (650-cm Each) | 0 |
8r-5535 Wiper & Washer Gp-Window -Front & Rear
| 10***33 | Bit-End-Rh | 1 |
| 10***34 | Bit-End-Lh | 1 |
| 8R***35 | Wiper & Washer Group-Window; -Front & Rear | 1 |
227-3194 Wiper Gp-Window
| 22***94 | Wiper Group-Window | 1 |
Power Train
107-0703 Axle Ar-Fixed -Front
| 10***06 | Dowel-Hollow; (35.0 Odx45.0mm Oal) | 8 |
| 10***96 | Shaft-Axle | 2 |
| 10***03 | Axle Ar-Fixed; -Front | 1 |
107-0702 Axle Ar-Oscillating -Rear
| 10***02 | Axle Ar-Oscillating; -Rear | 1 |
| 14***24 | Connector Group | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
107-0700 Axle Gp-Fixed -Front
| 10***00 | Axle Group-Fixed; -Front | 1 |
| 14***24 | Connector Group | 1 |
| 14***52 | Elbow As. | 1 |
107-0699 Axle Gp-Oscillating -Rear
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 14 |
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 10 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 3 |
229-5371 Block Gp-Hydraulic -Axle, Front
| 11***61 | Tube | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 5 |
| 22***71 | Block Group-Hydraulic; -Axle, Front | 1 |
229-5373 Block Gp-Hydraulic -Axle, Rear
| 10***29 | Retainer | 1 |
| 10***30 | Gasket | 1 |
| 11***59 | Valve Group-Transmission Control; -Transmission Clutch | 1 |
6y-6967 Case & Parts Gp-Planetary
| 05***58 | "P" Clip | 1 |
| 10***15 | Tube | 1 |
| 10***37 | Elbow | 1 |
283-7684 Case Gp-Transfer Gear
| 05***58 | "P" Clip | 1 |
| 10***15 | Tube | 1 |
| 10***37 | Elbow | 1 |
117-5858 Control Gp-Transmission Hyd
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 11***58 | Control Group-Transmission Hydraulic | 1 |
| 15***84 | Cover-Shipping | 1 |
229-5392 Cooler Ar-Axle Oil
| 13***48 | Cup-Dust | 1 |
| 13***83 | Ring-Retaining | 1 |
| 17***03 | Yoke As | 1 |
126-3654 Cover Gp-Shipping
| 03***57 | Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer | 6 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 10***18 | Gear-Bevel; (53-Teeth) | 1 |
237-5716 Differential & Bevel Gear Gp -Rear Axle
| 19***49 | Tube As | 1 |
| 1N***96 | Vandalism Protection Group; Protection Gp-Vandalism | 1 |
| 1P***79 | Flange (Half) | 2 |
237-5714 Differential & Bevel Gear Gp -Front Axle
| 07***41 | Seal; (30.3mm Od) | 1 |
| 13***10 | Plug; (Transmission Oil Drain) | 1 |
| 19***23 | Drain As; (Torque Converter, Xmsn Oil) | 1 |
118-9704 Differential & Bevel Gear Gp -Rear Axle
| 03***57 | Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer | 6 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 10***18 | Gear-Bevel; (53-Teeth) | 1 |
204-7007 Differential & Bevel Gear Gp -Front Axle
| 12***51 | Case As-Differential | 1 |
| 20***07 | Differential & Bevel Gear Group; -Front Axle | 1 |
| 2F***64 | Nut; (2-1/8-12-Thd) | 4 |
120-0550 Differential Gp
| 12***50 | Differential Group | 1 |
| 13***95 | Filter Group-Oil; -Torque Converter Charging | 2 |
| 14***05 | Adapter Group | 1 |
138-1509 Drain Gp-Ecology -Power Train Oil
| 13***76 | Filter Element As-Oil; (Ultra High Efficiency)(Ultra High Efficiency) | 1 |
| 13***76 | Cover Assem. | 1 |
| 13***99 | Retainer | 1 |
198-0258 Filler Gp-Power Train Oil
| 16***09 | Plug As-Hydraulic | 1 |
| 19***58 | Filler Group-Power Train Oil | 1 |
| 22***13 | Filter As-Fuel; (Screen)(Axle Oil Cooler) | 1 |
196-1246 Filter & Mtg Gp-Power Train
| 12***65 | Gauge-Liquid Level; (Power Train Oil) | 1 |
| 12***89 | Adapter | 2 |
| 12***13 | Plate | 1 |
133-1295 Filter Gp-Oil -Power Train
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 2 |
| 10***89 | Gear-Input; (56-Teeth) | 1 |
| 10***90 | Gear-Output; (51-Teeth) | 1 |
230-3633 Filter Gp-Oil -Axle Oil Cooler
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 2 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 11 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 12 |
133-8649 Gauge Gp-Sight -Power Train Oil
| 10***15 | Tube | 2 |
| 11***28 | Pump Group-Transmission | 1 |
| 11***44 | Manifold | 1 |
6y-6968 Gear Gp-Input Transfer
| 10***15 | Tube | 2 |
| 11***44 | Manifold | 1 |
| 11***76 | Hose As | 1 |
6y-6969 Gear Gp-Output Transfer
| 10***15 | Tube | 2 |
| 11***44 | Manifold | 1 |
| 11***76 | Hose As | 1 |
109-6910 Lines Gp-Power Train Oil
| 10***15 | Tube | 2 |
| 10***10 | Lines Group-Power Train Oil | 1 |
| 11***44 | Manifold | 1 |
118-9732 Mounting Gp-Axle
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
127-2967 Mounting Gp-Rim
| 10***02 | Axle Ar-Oscillating; -Rear | 1 |
| 10***03 | Axle Ar-Fixed; -Front | 1 |
| 10***69 | Mounting Group-Torque Converter | 1 |
109-6869 Mounting Gp-Torque Converter
| 10***69 | Mounting Group-Torque Converter | 1 |
| 20***57 | Kit-Seal | 1 |
| 28***19 | Water Transfer Tube, Bolt; (M10x1.5x300-mm) | 4 |
6y-6966 Planetary Gp-Transmission
| 11***54 | Gear-Oil Pump Drive; (57-Teeth) | 1 |
| 14***77 | Pump Group-Transmission | 1 |
| 1B***14 | Key-Woodruff | 1 |
175-3716 Power Train Ar
| 11***52 | Body As-Oil Pump | 1 |
| 11***53 | Body As-Oil Pump | 1 |
| 11***77 | Gear As-Oil Pump; (8-Teeth) | 1 |
292-9912 Pump Gp-Gear -Axle Oil Cooler
| 11***54 | Gear-Oil Pump Drive; (57-Teeth) | 1 |
| 1B***14 | Key-Woodruff | 1 |
| 27***51 | Pump Group-Transmission | 1 |
113-7428 Pump Gp-Transmission
| 11***28 | Pump Group-Transmission | 1 |
| 11***77 | Gear As-Oil Pump; (8-Teeth) | 1 |
| 13***67 | Bearing-Sleeve | 2 |
279-6750 Pump Gp-Transmission
| 20***62 | Rim Group-Demountable | 1 |
| 27***50 | Pump Group-Transmission | 1 |
| 2D***08 | Grommmet | 1 |
143-8377 Pump Gp-Transmission
| 11***27 | Rim Group-Demountable | 4 |
| 12***67 | Mounting Group-Rim | 1 |
| 14***77 | Pump Group-Transmission | 1 |
279-6751 Pump Gp-Transmission
| 11***28 | Rim As | 1 |
| 12***30 | Flange | 2 |
| 19***04 | Band-Bead Seat | 1 |
127-2966 Rim Ar
| 11***27 | Bolt; (M20x2.5x90-mm) | 1 |
| 11***60 | Yoke As | 1 |
| 12***66 | Rim Ar | 1 |
112-5727 Rim Gp-Demountable
| 11***50 | Universal Joint Group | 1 |
| 11***27 | Rim Group-Demountable | 1 |
| 8T***81 | Bolt; (M16x2.0x80mm) | 8 |
205-0162 Rim Gp-Demountable
| 13***83 | Ring-Retaining | 1 |
| 14***51 | Shaft As | 1 |
| 16***17 | Cup-Dust | 1 |
112-5452 Shaft Gp-Drive
| 11***52 | Shaft Group-Drive | 1 |
| 8R***34 | Spider & Bearing Group | 1 |
| 8X***32 | Spider & Bearing Group | 1 |
112-5449 Shaft Gp-Input Drive
| 11***49 | Shaft Group-Input Drive | 1 |
| 11***92 | Bracket As-Mounting | 2 |
| 4E***16 | Bracket As-Mounting | 2 |
168-1916 Slip Joint Gp -Center
| 12***66 | Rim Ar | 1 |
| 12***73 | Tire; (45/65-R45) | 4 |
| 16***16 | Slip Joint Group; -Center | 1 |
8r-7036 Spider & Bearing Gp
| 12***66 | Rim Ar | 1 |
| 13***74 | Tire; (45/65-45) | 4 |
| 8R***36 | Spider & Bearing Group | 1 |
109-6861 Support Gp-Transmission
| 10***61 | Support Group-Transmission | 1 |
| 12***66 | Rim Ar | 1 |
| 13***75 | Tire; (45/65-45) | 4 |
165-6175 Tire & Rim Ar
| 12***66 | Rim Ar | 1 |
| 16***75 | Tire & Rim Ar | 1 |
| 20***40 | Tire; (45/65-R45) | 4 |
148-3460 Tire & Rim Ar
| 12***66 | Rim Ar | 1 |
| 14***60 | Tire & Rim Ar | 1 |
| 17***25 | Tire; (45/65-R45) | 4 |
136-0871 Tire & Rim Ar
| 12***02 | Tire; (45/65-R45) | 4 |
| 12***66 | Rim Ar | 1 |
| 13***71 | Tire & Rim Ar | 1 |
245-5772 Tire & Rim Ar
| 12***66 | Rim Ar | 1 |
| 24***72 | Tire & Rim Ar | 1 |
| 31***51 | Tire; (45/65-45) | 4 |
266-8654 Tire & Rim Ar
| 10***69 | Housing As-Torque Converter | 1 |
| 10***80 | Adapter-Pump | 1 |
| 10***40 | Adapter-Pump | 2 |
204-9241 Tire & Rim Ar
| 12***66 | Rim Ar | 1 |
| 20***41 | Tire & Rim Ar | 1 |
| 30***30 | Tire; (45/65-45) | 4 |
147-9632 Tire & Rim Ar
| 12***66 | Rim Ar | 1 |
| 14***32 | Tire & Rim Ar | 1 |
| 16***68 | Tire; (45/65-R45) | 4 |
136-7334 Tire & Rim Ar
| 12***66 | Rim Ar | 1 |
| 13***34 | Tire & Rim Ar | 1 |
| 16***69 | Tire; (45/65-45) | 4 |
127-2964 Tire & Rim Ar
| 12***64 | Tire & Rim Ar | 1 |
| 12***66 | Rim Ar | 1 |
| 8R***83 | Tire; (45/65-45) | 4 |
313-4121 Tire & Rim Ar
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 12 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 12 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
170-7326 Tire & Rim Ar
| 12***66 | Rim Ar | 1 |
| 17***26 | Tire & Rim Ar | 1 |
| 24***71 | Tire; (45/65-R45) | 4 |
136-0872 Tire & Rim Ar
| 12***66 | Rim Ar | 1 |
| 13***72 | Tire & Rim Ar | 1 |
| 14***31 | Tire; (45/65-45) | 4 |
136-0883 Tire & Rim Ar
| 12***66 | Rim Ar | 1 |
| 13***83 | Tire & Rim Ar | 1 |
| 14***58 | Tire; (45/65-45) | 4 |
303-6329 Tire & Rim Ar
| 11***11 | Valve & Mtg Group-Lockup Clutch; -Torque Converter | 1 |
| 13***12 | Switch Group-Rocker; -Torque Converter Lockup Clutch | 1 |
| 13***86 | Torque Converter & Housing Group; -Lockup | 1 |
170-8004 Tire & Rim Ar
| 12***66 | Rim Ar | 1 |
| 17***04 | Tire & Rim Ar | 1 |
| 26***53 | Tire; (45/65-45) | 4 |
165-6171 Tire & Rim Ar
| 12***66 | Rim Ar | 1 |
| 16***71 | Tire & Rim Ar | 1 |
| 17***03 | Tire; (45/65-R45) | 4 |
133-9886 Torque Converter & Housing Gp
| 11***58 | Control Group-Transmission Hydraulic | 1 |
| 12***54 | Cover Group-Shipping | 1 |
| 13***86 | Torque Converter & Housing Group; -Lockup | 1 |
1c-7954 Torque Converter Ar-Lockup
| 10***33 | Spider & Bearing Group | 2 |
| 11***51 | Shaft | 1 |
| 1C***54 | Torque Converter Ar-Lockup | 1 |
155-5296 Torque Converter Gp-Lockup
| 13***75 | Shaft | 1 |
| 15***96 | Torque Converter Group-Lockup | 1 |
| 8X***32 | Spider & Bearing Group | 2 |
6y-6965 Transmission Ar
| 13***73 | Shaft | 1 |
| 6Y***65 | Transmission Ar | 1 |
| 8X***32 | Spider & Bearing Group | 1 |
112-5450 Universal Joint Gp
| 11***50 | Universal Joint Group | 1 |
| 21***42 | Valve Group-Modulating; -Torque Converter Lockup Clutch | 1 |
| 6D***89 | Seal-O-Ring | 1 |
130-2374 Universal Joint Gp -Front
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***74 | Universal Joint Group; -Front | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
130-2372 Universal Joint Gp -Rear
| 13***72 | Universal Joint Group; -Rear | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
112-4811 Valve & Mtg Gp-Lockup Clutch -Torque Converter
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 11***11 | Valve & Mtg Group-Lockup Clutch; -Torque Converter | 1 |
| 1L***62 | Ring-Retaining | 1 |
217-2708 Valve Gp-Modulating -Tc Impeller Clutch
| 21***83 | Orifice-Screen | 1 |
| 21***08 | Valve Group-Modulating; -Tc Impeller Clutch | 1 |
| 23***08 | Plug As-Orifice | 1 |
216-5342 Valve Gp-Modulating -Torque Converter Lockup Clutch
| 21***42 | Valve Group-Modulating; -Torque Converter Lockup Clutch | 1 |
| 2B***95 | Cap Screw--Tube Assembly To Air Inlet Pipe | 2 |
| 33***73 | Manifold-Bottom | 1 |
8e-9727 Valve Gp-Relief -Torque Converter Outlet Press
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 1P***99 | Stop | 1 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 2 |
8e-6398 Valve Gp-Selector -Transmission
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 10***53 | Manifold-Top | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
117-5860 Valve Gp-Selector & Press Cont -Transmission
| 03***57 | Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer | 4 |
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 6 |
| 10***89 | Gear-Ring; (87-Teeth) | 1 |
6i-8563 Valve Gp-Torque Conv Priority
| 10***01 | Wheel & Final Drive Group | 1 |
| 11***70 | Stud-Taperlock | 30 |
| 16***35 | Brake Group-Service | 1 |
117-5859 Valve Gp-Transmission Control
| 10***01 | Wheel & Final Drive Group | 1 |
| 11***70 | Stud-Taperlock | 30 |
| 11***59 | Valve Group-Transmission Control; -Transmission Clutch | 1 |
107-0701 Wheel & Final Drive Gp
| 10***01 | Wheel & Final Drive Group | 1 |
| 12***68 | Lock As | 1 |
| 21***67 | Cover As; (Lh) | 1 |
169-6898 Wheel Gp-Final Drive & Brake
| 13***66 | Nut; (M14x2-Thd) | 4 |
| 16***23 | Pawl | 2 |
| 16***53 | Door As | 1 |
Service Equipment And Supplies
1n-4296 Protection Gp-Vandalism
| 1N***96 | Vandalism Protection Group; Protection Gp-Vandalism | 1 |
6g-8390 Protection Gp-Vandalism
| 6G***90 | Covers Group-Protection; -Brake, Hoist, Torque Converter | 1 |
327-4188 Film Gp
| 32***88 | Film Group | 1 |
159-2749 Film Gp
| 11***81 | Cover-Hydraulic Cap | 1 |
| 15***49 | Film Group | 1 |
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
248-2178 Plate & Film Gp
| 24***78 | Plate & Film Group | 1 |
Steering System
224-2561 Actuator Gp-Pump
| 16***65 | Piston As | 9 |
| 16***59 | Retainer | 1 |
| 16***60 | Guide-Ball | 1 |
249-4488 Actuator Gp-Pump
| 11***98 | Angle As | 1 |
| 11***31 | Junction Block | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
164-6987 Barrel Gp-Pump -Steering
| 11***63 | Retainer | 2 |
| 15***52 | Cylinder Group-Steering | 2 |
| 16***87 | Barrel Group-Pump; -Hydraulic Fan | 1 |
133-7106 Block Gp-Hydraulic
| 11***88 | Cylinder As | 1 |
| 11***91 | Rod As | 1 |
| 13***06 | Block Group-Hydraulic; -Steering | 1 |
1c-9121 Cylinder & Mtg Gp-Steering
| 16***47 | Filter Group-Oil; -Axle Oil Clr, Systems Case Dr | 1 |
| 16***55 | Bracket | 1 |
| 1C***21 | Cylinder & Mtg Group-Steering | 1 |
157-1352 Cylinder Gp-Steering
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***17 | Filter-Oil; (Ultra High Efficiency)(Hydraulic, Transmission) | 1 |
| 15***52 | Cylinder Group-Steering | 1 |
174-8218 Filter & Lines Gp-Steering
| 08***72 | Plug-O-Ring | 2 |
| 16***83 | Head | 1 |
| 16***84 | Pin | 1 |
115-2129 Filter Gp-Oil -Steering, Implement, Pilot
| 10***07 | Pump Group-Gear; -Secondary Steering | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***97 | Valve Group-Steering; -With Secondary Steering | 1 |
164-6939 Head Gp-Pump -Steering
| 10***07 | Pump Group-Gear; -Secondary Steering | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***97 | Valve Group-Steering; -With Secondary Steering | 1 |
167-1302 Lines Gp-Secondary Steering
| 10***07 | Pump Group-Gear; -Secondary Steering | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***69 | Clip As-Connector; (3-Pin) | 1 |
167-1304 Lines Gp-Secondary Steering
| 16***77 | Plug As | 1 |
| 16***04 | Lines Group-Secondary Steering | 1 |
| 17***02 | Screen Group-High Pressure | 1 |
219-5974 Lines Gp-Steering
| 11***92 | Hose As; (Labeled B) | 1 |
| 11***93 | Hose As; (Labeled C & D) | 1 |
| 11***96 | Manifold | 1 |
219-3482 Lines Gp-Steering
| 11***92 | Hose As; (Labeled B) | 1 |
| 11***93 | Hose As; (Labeled C & D) | 1 |
| 11***96 | Manifold | 1 |
229-5018 Lines Gp-Steering
| 11***29 | Filter Group-Oil; -Steering, Implement, Pilot | 1 |
| 11***40 | Plate | 1 |
| 11***82 | Tube As | 1 |
109-6884 Lines Gp-Steering Neutralizer
| 09***69 | Bolt | 4 |
| 10***84 | Lines Group-Steering Neutralizer | 1 |
| 13***65 | Pump Group-Gear; -Steering, Implement, Pilot | 1 |
218-3741 Lines Gp-Steering Oil Cooler
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 07***39 | Plate-Isolation | 2 |
| 07***43 | Plate-Isolation | 2 |
219-4741 Pump & Mtg Gp-Steering & Pilot
| 09***95 | Pin, Dowel | 2 |
| 10***41 | Ring-Snap | 1 |
| 13***89 | Kit-Seal | 1 |
101-4007 Pump Gp-Gear -Secondary Steering
| 09***58 | Ring-Retaining | 2 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 3 |
| 10***07 | Pump Group-Gear; -Secondary Steering | 1 |
136-3965 Pump Gp-Gear -Steering, Implement, Pilot
| 09***29 | Ring; (Retaining) | 1 |
| 13***65 | Pump Group-Gear; -Steering, Implement, Pilot | 1 |
| 14***73 | Roller | 4 |
216-4826 Pump Gp-Piston -Steering
| 21***26 | Pump Group-Piston; -Steering | 1 |
| 23***18 | Bracket As | 1 |
| 8T***97 | Nut-Weld; (M12x1.75-Thd) | 2 |
164-6938 Rotating Gp-Pump -Implement, Steering
| 11***97 | Bracket As | 1 |
| 11***33 | Hose As; (Labeled C) | 1 |
| 14***16 | Hose As | 2 |
133-7107 Stop Gp-Steering
| 13***07 | Stop Group-Steering | 1 |
133-7105 Valve & Mtg Gp-Steering Neut
| 13***05 | Valve & Mtg Group-Steering Neut | 1 |
| 17***69 | Valve Group-Check; -Steering | 2 |
| 17***71 | Valve Group-Check; -Steering | 2 |
176-9371 Valve Gp-Check -Steering
| 10***19 | Shim; (0.762-mm Thk) | 2 |
| 10***55 | Handle | 1 |
| 10***56 | Bracket | 1 |
164-7474 Valve Gp-Check -Steering Pilot
| 16***54 | Seal-O-Ring | 1 |
| 16***74 | Valve Group-Check; -Steering Clr Filter Byp, Pilot | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
111-7775 Valve Gp-Check -Steering Quad
| 11***75 | Valve Group-Check; -Steering Quad-Steering Quad, Ccs | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 1 |
133-7104 Valve Gp-Check -Steering Quad
| 13***04 | Valve Group-Check; -Steering Quad | 1 |
| 16***54 | Seal-O-Ring | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
185-9357 Valve Gp-Check -Steering Oil Cooler Bypass
| 10***07 | Spring | 1 |
| 10***10 | Plunger | 1 |
| 14***61 | Seal-Spool | 1 |
9t-3096 Valve Gp-Check -Parking, Secondary Brake
| 11***75 | Valve Group-Check; -Steering Quad-Steering Quad, Ccs | 1 |
| 14***18 | Connector As | 4 |
| 14***67 | Elbow Group; (Each Includes) | 2 |
176-9369 Valve Gp-Check -Steering
| 17***69 | Valve Group-Check; -Steering | 1 |
| 5K***90 | Seal-To Hydraulic Cooler Inlet Port | 1 |
| 6E***54 | Valve Group-Check; (Steer, Hydraulic Fan Oil Clr Bypass) | 1 |
249-5615 Valve Gp-Pilot -Stic Steering
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 10***18 | Shim; (.020in Thk) | 1 |
| 10***19 | Shim; (0.762-mm Thk) | 1 |
147-1238 Valve Gp-Pilot Cartridge
| 14***38 | Valve Group-Pilot Cartridge; -Steering | 1 |
| 16***83 | Spring | 1 |
| 6E***07 | Locknut-Sealing | 1 |
147-1237 Valve Gp-Pilot Cartridge
| 12***94 | Plug; (Break Off) | 5 |
| 14***37 | Valve Group-Pilot Cartridge; -Steering | 1 |
| 28***99 | Valve Group-Pump Control; -Pressure Compensator-Steering | 1 |
6e-3850 Valve Gp-Pump Control -Flow Compensator-Steering
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 6E***50 | Valve Group-Pump Control; -Flow Compensator-Steering | 1 |
| 6E***53 | Kit-Seal; (Relief Valve) | 1 |
6e-1024 Valve Gp-Pump Control -Pressure, Flow Compensator-Steering
| 11***99 | Plug | 1 |
| 11***24 | Setscrew | 1 |
| 17***22 | Spring | 1 |
281-0799 Valve Gp-Pump Control -Pressure Compensator-Steering
| 28***99 | Valve Group-Pump Control; -Pressure Compensator-Steering | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4J***22 | Seal-Interface Between 3rd & Tilt Valve | 1 |
224-5006 Valve Gp-Relief -Steering Pilot
| 10***66 | Adapter | 2 |
| 22***06 | Valve Group-Relief; -Steering Pilot | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
100-4335 Valve Gp-Relief -Pump Backup
| 10***35 | Valve Group-Relief; -Pump Backup | 1 |
| 13***15 | Manifold | 1 |
| 22***06 | Valve Group-Relief; -Steering Pilot | 1 |
6e-3986 Valve Gp-Relief -Secondary Steering
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 6E***86 | Valve Group-Relief; -Secondary Steering | 1 |
224-5741 Valve Gp-Relief -Steering Pilot
| 14***03 | Seal-O-Ring | 1 |
| 14***04 | Ring-Backup | 2 |
| 14***05 | Ring-Backup | 2 |
6e-3078 Valve Gp-Selector & Press Cont -Secondary Steering
| 10***35 | Valve Group-Relief; -Pump Backup | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 3 |
| 14***09 | Plug As-Sto | 3 |
4t-1860 Valve Gp-Shuttle -Load Signal, Steer, Implement
| 10***35 | Valve Group-Relief; -Pump Backup | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 3 |
| 14***09 | Plug As-Sto | 3 |
301-4616 Valve Gp-Steering -With Secondary Steering
| 19***24 | Core As-Hydraulic Oil Cooler | 1 |
| 19***25 | Core As-Steering Oil Cooler | 1 |
| 1M***98 | Clamp (1.06" Thick) | 8 |
112-4597 Valve Gp-Steering -With Secondary Steering
| 11***97 | Valve Group-Steering; -With Secondary Steering | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 5F***35 | Spring | 1 |
146-7571 Valve Gp-Steering Neutralizer
| 14***71 | Valve Group-Steering Neutralizer; -Stic Steering | 1 |
| 15***63 | Cylinder & Valve Group-Lift; -Lh, Quick-Drop | 1 |
| 15***65 | Cylinder & Valve Group-Lift; -Rh, Quick-Drop | 1 |
Work Tools
9w-5652 Edge Gp-Bit & Cutting -Semi-Universal Blade
| 6Y***77 | Edge-Cutting; (Lh) | 6 |
| 9W***52 | Bit & Cutting Edge Group; -Semi-Universal Blade | 1 |
6y-0308 Edge Gp-Bit & Cutting
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 39 |
| 4K***84 | Washer-Hard; (34x55x6-mm Thk) | 39 |
| 5P***23 | Bolt-Plow-Corner Adapters To Bucket | 39 |
9w-5650 Edge Gp-Bit & Cutting
| 13***79 | Edge-Cutting | 2 |
| 13***80 | Edge-Cutting | 2 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 36 |
9w-5651 Edge Gp-Bit & Cutting
| 6Y***76 | Edge-Cutting | 6 |
| 9W***51 | Bit & Cutting Edge Group | 1 |
6y-0446 Edge Gp-Bit & Cutting
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 39 |
| 4K***84 | Washer-Hard; (34x55x6-mm Thk) | 39 |
| 5P***23 | Bolt-Plow-Corner Adapters To Bucket | 39 |
6y-0307 Edge Gp-Bit & Cutting
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 36 |
| 4K***84 | Washer-Hard; (34x55x6-mm Thk) | 36 |
| 5P***23 | Bolt-Plow-Corner Adapters To Bucket | 36 |
6y-0445 Edge Gp-Bit & Cutting
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 36 |
| 4K***84 | Washer-Hard; (34x55x6-mm Thk) | 36 |
| 5P***23 | Bolt-Plow-Corner Adapters To Bucket | 36 |
109-9038 Bit Gp-End
| 10***38 | Bit Group-End | 1 |
| 15***72 | Plate-Block Port | 2 |
| 15***74 | Plate-Side Wear | 2 |
109-9039 Bit Gp-End
| 10***39 | Bit Group-End | 1 |
| 15***72 | Plate-Block Port | 2 |
| 15***71 | Plate | 2 |
8e-4541 Bit-End
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 32 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 16 |
8e-4542 Bit-End
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 32 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 16 |
155-6603 Blade As-Coal
| 15***03 | Blade As-Coal | 1 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 23 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 14 |
155-6602 Blade As-Semi-Universal
| 15***02 | Blade As-Semi-Universal | 1 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 30 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 14 |
153-2113 Blade Gp-Coal
| 15***13 | Blade Group-Coal | 1 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 23 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 14 |
153-2112 Blade Gp-Semi-Universal
| 15***12 | Blade Group-Semi-Universal | 1 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 30 |
| 3K***70 | Nut-Full (1.25 X 7 Thd) | 14 |
135-9598 Edge Gp-Bit & Cutting
| 13***98 | Edge Group-Bit & Cutting | 1 |
9w-5653 Edge Gp-Bit & Cutting -Universal Blade
| 6Y***78 | Edge-Cutting; (Rh) | 6 |
| 9W***53 | Edge Group-Bit & Cutting; -Universal Blade-Abrasion | 1 |
222-7543 Edge Gp-Cutting -Rh
| 22***43 | Edge Group-Cutting; -Rh | 1 |
| 3N***90 | Plate Serial Number; On R.H. Rear Bank Of Cylinder Block As Viewed From Rear Of Engine | 1 |
| 7B***28 | Drive Screws-2 Required For Installing | 2 |
222-7541 Edge Gp-Cutting -Center
| 22***41 | Edge Group-Cutting; -Center | 1 |
222-7542 Edge Gp-Cutting -Lh
| 13***67 | Film-Stripe | 1 |
| 13***68 | Film-Stripe | 1 |
| 13***69 | Film-Identification; (Cat) | 2 |
275-5922 Edge-Cutting -Rh
| 10***42 | Film-Identification; (Engine Oil Filter) | 2 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 12***07 | Film-Identification; (Grease) | 1 |
275-5923 Edge-Cutting -Lh
| 27***23 | Edge-Cutting; -Lh | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 1 |
| 5P***02 | Padlock Group; (Includes: Battery Compartments, Platform Compartments, Radiator Access Door, Firewall Doors) | 1 |
854G serial number reference
The PIN plate is riveted to the main frame, commonly near the operator's cab step or on the frame rail below/behind the cab on the right-hand side; a second plate is on the engine. Read the first 3 characters as the plant/model-run prefix and the following 5-6 digits as the machine sequence number; on 17-character full PINs the serial number is the last 8 characters.
| Prefix | Identifies | Notes |
|---|---|---|
| 1JW | 854G Wheel Dozer, Std | Earliest 854G prefix, production began around 1997. Cat 3508B turbocharged diesel, flywheel power 597 kW (800 hp), gross power 656 kW (880 hp). Single-configuration large mining wheel dozer, no XL/LGP/XW variant documented for this model. |
| AMP | 854G Wheel Dozer, Std | Mid-run prefix, production around 2000. Same 3508B diesel powertrain and frame layout as other 854G prefixes. |
| A4W | 854G Wheel Dozer, Std | Latest confirmed 854G prefix, production around 2003. 3508B diesel, articulated frame steering, largest Cat wheel dozer offered at the time. |
Frequently asked questions
What engine does the Caterpillar 854G use?
The 854G runs a turbocharged Cat 3508B diesel with electronic unit injection (EUI), rated at roughly 656 kW (880 hp) gross and 597 kW (800 hp) net at 1,750 rpm. This is the same engine platform carried over from the machine's Tiger Engineering 790G origins.
What is the operating weight of the Caterpillar 854G?
Operating weight runs from about 96,266 to 99,395 kg (212,230 to 219,128 lb) depending on blade type and counterweight fitment, so treat the figure as a range rather than a single number when quoting weight for transport or foundation planning.
What replaced the Caterpillar 854G?
Caterpillar replaced the 854G with the 854K, launched around 2013 and powered by the C32 ACERT engine. The 854K carries a heavier operating weight and an updated, emissions-compliant powertrain, but its basic frame and axle architecture still trace back to the same Tiger Engineering lineage as the 854G.
What 854G owners discuss
What engine is actually in the 854G, and does it carry over to later 854 models?
The 854G runs a turbocharged Cat 3508B EUI diesel, four-stroke, Tier 2 compliant with ADEM II electronic control. Flywheel power sits around 597 kW (800 hp), with gross power figures up to roughly 656 kW (880 hp) depending on which spec sheet is cited. This is specific to the G-series. The later 854K moved to a different engine family entirely, so do not carry engine parts, injector trim data, or fault-code interpretation across the G-to-K boundary.
Why do shops that service Cat wheel loaders find the 854G easy to pick up?
The 854G is built off the 992G wheel loader platform. It shares final drive assemblies (ring gear, hub, spindle housing, axle shaft, sun gear, planetary carrier), the impeller-clutch torque converter design, and most of the electrical architecture right down to a combined 992G/854G electrical schematic. A tech familiar with the 992G loader powertrain is largely already familiar with the 854G's, and common wear or failure patterns on one machine are a useful lead when troubleshooting the other.
What electrical or sensor issues come up most often on this machine?
The steering oil pressure sensor, brake pressure sensor, transmission pressure sensor, and implement control sensors are the most frequently reported fault points on the VIMS-monitored electrical system. Intermittent connector or harness wiring problems between the ECM and these sensors can cause erratic gauge readings or rough running without always logging a hard fault code. Inspect harness routing and connectors at flex points and near the engine/frame junction before condemning a sensor outright.
What powertrain and hydraulic behavior should feel normal versus a sign of wear?
The impeller clutch torque converter with lockup clutch should shift smoothly with only a mild tone change under load; harsh, hunting, or delayed shifts point to converter or clutch wear rather than a simple adjustment. The rimpull control system is designed to taper rimpull down as the left pedal is depressed, roughly full to about a quarter of available pull, specifically to fight tire slip in dozing — if that tapering feels abrupt or absent, check calibration first. The machine runs two separate hydraulic circuits (steering versus implement), so a fault isolated to only one system's response usually narrows the problem to that circuit rather than a shared pump.
What wear patterns are typical for tires and wear components on a machine this size?
As a wheeled dozer, the 854G rides on large L5-rated OTR tires rather than tracks, and tire cost is one of the biggest ownership expenses on this class of machine — commonly several thousand dollars USD per tire, varying widely by size, brand, and region. Typical service life runs in the low thousands of hours under normal conditions, but drops sharply in abrasive coal or hard rock dozing, where chunking and cutting are common complaints. Pusharm and cutting-edge wear on the blade also accelerates in production dozing, and wear patterns shift depending on whether the machine carries a standard S-blade, semi-U, or coal blade configuration.
What should a buyer check before purchasing a used 854G?
Cross-check indicated hours against physical wear — pedal, joystick, seat, floor plate, and step wear should roughly match the hour meter. Run the engine and watch for a steady idle and temperature under load; heavier-than-normal exhaust can point to injector or airflow problems. Cycle the transmission through gears and directions looking for smooth, predictable shifts. Cycle the blade and any implement repeatedly and watch for cycle times slowing down, a sign of internal hydraulic leakage or pump wear. Inspect welds at the push arms, blade mounts, and rear frame for non-factory reinforcement, which usually marks a prior repair. Check remaining tire tread given replacement cost, and pull whatever fault-code history is available through the diagnostic tool before final offer.
Is there anything on the 854G that should never be diagnosed or adjusted without a dealer involved?
The load-sensing hydraulic steering circuit and the brake system are both safety-critical and tied directly into the same pressure-sensor network that throws the most common fault codes on this machine. A steering or brake pressure fault, or any hesitation/lag felt in articulation steering, should not be worked around by clearing codes or bypassing a sensor. Have your dealer verify steering and brake circuit integrity with proper pressure-test procedures before returning the machine to service.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 854G part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.