Caterpillaroff-highway trucktruck
Caterpillar 795F AC
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 795F AC is an ultra-class, rigid-frame mining haul truck built for the largest open-pit and coal operations. It runs a Cat C175-16 diesel, a 16-cylinder, quad-turbocharged engine rated at roughly 2,536 kW (3,400 hp) gross, driving a Cat AC electric drive system: a brushless AC generator, IGBT-controlled inverters, AC induction wheel motors, and a dynamic retarding grid in place of a mechanical transmission. Gross machine weight runs about 570-576 t depending on dump body and configuration, with a nominal payload class near 345 t. Production began with pilot units around 2009-2010 and continues today. The 795F AC was a new size class for Caterpillar, launched alongside the F-series 793F and 797F to fill the gap between the 240-250 t and 380-400 t classes, so it has no direct mechanical-era predecessor and no separate successor model number. It ships in AC-drive configuration only, with a choice of MSD II or gateless coal dump bodies, each offered in multiple base and extension capacities, plus a factory-supported trolley-assist retrofit.
Through its production life the 795F AC has kept its model designation while Caterpillar updated it in place: VIMS payload and health monitoring moved from earlier VIMS generations to VIMS 3G, trolley-assist capability was added using the same high-voltage architecture shared with the 794 AC, 796 AC and 798 AC, and filtration and S.O.S-based service intervals were extended to cut downtime. There has been no facelift model or renumbering, so parts and drivetrain commonality across the serial range is strong. That continuity matters in the used and parts market: the 795F AC shares engine, drive and brake architecture with its 793F AC and 797F siblings, so wheel motors, generator components and oil-cooled brake hardware carry cross-model value. Its population is smaller than the high-volume 793 and 797 lines, which puts a premium on component exchange, rebuilt final drives and reconditioned electrical-cabinet assemblies rather than blanket new-machine replacement, especially since Caterpillar has not fielded a distinct diesel successor to date.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 795F AC specifications
Engine
| Engine model | Cat C175-16, quad-turbocharged, air-to-air aftercooled diesel |
| Cylinders | 16 (V16, four-stroke) |
| Gross power (SAE J1995) | 2,535-2,536 kW (3,400 hp) |
| Net power | 2,377 kW (3,188 hp) |
| Displacement | 85 L (5,187 cu in) |
| Bore x stroke | 175 mm x 220 mm (6.9 in x 8.7 in) |
| Emissions | Tier 2 compliant |
Weights
| Gross machine operating weight | Varies by configuration: 570,678-576,062 kg (1,257,000-1,270,000 lb) reported |
| Chassis weight | Varies by source: 199,790-202,270 kg (440,462-445,524 lb) |
| Rated/nominal payload | Varies by configuration (tire and body spec): figures reported from 313 t up to 338-345 t (approx. 345-372 tons) |
| Weight distribution, loaded | 33% front axle / 67% rear axle |
Dimensions
| Transport length | 15.15 m (49 ft 9 in) |
| Transport width (over canopy) | 9.45 m (31 ft) |
| Height, ROPS/cab | 6.33 m (20.75 ft); overall transport height with body varies by configuration, up to about 7.8 m (25.6 ft) |
| Wheelbase | 6.73 m (22 ft 1 in) |
| Ground clearance | 750 mm (2.5 ft) |
| Tire size | 59/80R63 standard; 56/80R63 optional |
| Rim size | 41 in x 63 in |
| Turning circle diameter | 38.7 m (127 ft) |
| Steer angle | 34 degrees |
Performance
| Travel speed, loaded (top speed) | 64 km/h (40 mph) |
| Dump body capacity, heaped (SAE 2:1) | 181-252 m³ (237-330 yd³), varies by body configuration |
| Dump body capacity, struck | 121.5-211 m³ (159-276 yd³), varies by body configuration |
| Dynamic retarding power | Continuous rating around 4,750 kW (6,370 hp) |
Service capacities (summary)
| Fuel tank | Varies by configuration: 3,596 L (950 gal) standard tank; 7,192 L (1,900 gal) large-capacity tank option |
| Hydraulic system (brake/hoist), including tank | 1,500 L (396 gal) |
| Engine oil (crankcase) | 310 L (82 gal) |
| Cooling system | 1,100 L (291 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
795F AC fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) — Cat C175-16 diesel | 310 L (82 gal) | Cat DEO (Diesel Engine Oil). SAE 15W-40 covers most operating ambient ranges; SAE 10W-30 for colder ambient. Low-emission variant Cat DEO-ULS where a low-ash / low-sulfur spec is called for. |
| Cooling system | 1100 L (291 gal) | Cat ELC (Extended Life Coolant), factory premix. Freeze protection to about -36°C (-33°F) at standard concentration; do not mix with conventional green coolant. |
| Fuel tank (standard) | 3596 L (950 gal) | Ultra-low-sulfur diesel fuel meeting Cat's fuel specification. No viscosity grading applies. |
| Fuel tank (optional oversize tank) | 7192 L (1900 gal) | Same fuel spec as standard tank — ultra-low-sulfur diesel. |
| Final drive, each side (planetary wheel-end) | 340.7 L (90 gal) per side | Cat FDAO (Final Drive Axle Oil), SAE 60 for the extreme-pressure hypoid-gear protection this compartment needs. Cat FDAO-SYN (synthetic) is the cold-climate / extended-drain alternative — do not substitute plain TDTO here, its EP package is too light for final-drive hypoid loads. |
| Steering hydraulic tank | 210 L (55.5 gal) | Cat HYDO Advanced, viscosity graded by ambient temperature (HYDO Advanced 10 for cold climates, 30 for moderate/warm). Cat BIO HYDO Advanced is the biodegradable alternative. |
| Steering hydraulic system (incl. tank) | 299 L (79 gal) | Cat HYDO Advanced, same viscosity-by-ambient-temperature guidance as the steering tank. |
| Brake/hoist hydraulic tank | 508 L (134.2 gal) | Cat HYDO Advanced, graded by ambient temperature (10 cold / 20-30 moderate to warm). |
| Brake/hoist hydraulic system (incl. tank) | 1500 L (396.3 gal) | Cat HYDO Advanced, same viscosity-by-ambient-temperature guidance as the brake/hoist tank. |
| Grease (chassis and pin joints, spec only) | Not a filled-capacity item — service per lube-point schedule | Cat Advanced 3Moly Grease, NLGI 2 lithium-complex with 3% moly, for the -20°C to 40°C (-4°F to 104°F) ambient band. Cat arctic/desert grease variants apply outside that range. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 795F AC maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 8,000 h |
|
Servicing the 795F AC beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S.O.S sampling on engine oil, final drive oil and hydraulic oil to trend wear metals before the C175-16's quad-turbo top end or the wheel motor gearing fails outright. Use VIMS/VIMS 3G payload and event logs to spot abuse cycles and overheating trends. Check insulation resistance on the generator, inverter cabinet and wheel motor windings on a fixed schedule, and trend retarding-grid temperatures to catch a failing blower before it cooks the resistor bank or brake discs.
Corrective & Common Repairs
Typical faults center on the AC drive and payload-handling components: wheel motor speed sensor and harness failures, IGBT inverter module trips, chafed high-voltage cabling in the generator cabinet, and accumulator precharge loss in the steering and brake circuits. Tire and rim damage is common given 345 t payloads. Dump body liner and cutting-edge wear on the MSD II or gateless coal body, plus hoist and steering cylinder seal leaks, round out the recurring repair list.
Overhaul & Rebuild Points
Major rebuild points track the drivetrain: C175-16 top-end overhaul (liners, injectors, turbo cartridges), wheel motor and generator bearing and insulation rework, final drive planetary rebuilds done as matched sets to keep traction balanced, and hoist and steering cylinder reseals. Dump body structure and pivot bushings need periodic inspection and relining. Because there is no direct diesel successor, component exchange and rebuild-to-spec programs extend service life instead of machine replacement.
Seasonal & Environment Servicing
Cold climates call for engine block heating, cold-weather coolant and oil-viscosity grade changes, and battery/high-voltage system checks before start-up. High-altitude and high-ambient sites need engine derate management and extra attention to aftercooler and radiator core cleaning on the C175-16. Dusty pits demand frequent inverter-cabinet and cab air filter service to protect electronics, while wet-season operation calls for closer inspection of final drive and brake seals against water ingress.
795F AC common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1R-0755 | Filter As-Fuel | Fuel system service | Check fitment → |
| 316-9954 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 313-4082 | Filter Element-Enclosure Air | Air intake service | Check fitment → |
| 107-0266 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 293-3645 | Filter Element As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
795F AC fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 2934 | DC power bus voltage 1 sensor circuit fault (Motor 1 ECM) | Open or shorted wiring, damaged connector, or failed DC power transducer feeding the Motor 1 control module | Perform the electrical shutdown and voltage discharge procedure before entering the high-voltage compartment, then inspect the DC power transducer wiring and connectors; cross-check against the CID 2935 reading with Cat ET |
| CID 2935 | DC power bus voltage 2 sensor circuit fault (Motor 2 ECM) | Open or shorted wiring, damaged connector, or failed DC power transducer feeding the Motor 2 control module | Perform the electrical shutdown and voltage discharge procedure first, then inspect the transducer wiring and connectors on the Motor 2 side; compare against CID 2934 to isolate which side is faulty |
| E1126 | DC power bus voltage mismatch between Motor 1 and Motor 2 ECM readings (Level 2 event) | One motor ECM's DC bus voltage sensing circuit is reading incorrectly relative to the other, or a transducer has drifted out of calibration | Compare live CID 2934 and CID 2935 values on Cat ET, inspect the transducer circuit on whichever side deviates, and verify calibration before returning the truck to service |
| E988 | DC ground fault detected on the high-voltage DC bus | Insulation breakdown, moisture or contamination inside the inverter cabinet, or a damaged DC cable/bus bar allowing leakage to frame ground | Perform the electrical shutdown and voltage discharge procedure before entry, inspect DC cabling, bus bars and cabinet for moisture or physical damage, and megger-test insulation; a leakage reading near 100 percent means shut down immediately, lower levels warrant monitoring if they persist |
| E1184 | AC ground fault detected on the traction motor/generator AC side | Winding insulation degradation in the generator or wheel motors, contamination, or a damaged AC cable between the inverter cabinet and a traction motor | Perform the electrical shutdown and voltage discharge procedure, inspect generator and wheel motor windings plus AC cabling for moisture or damage; treat any reading approaching 100 percent leakage as a direct short and shut down immediately |
| CID 3015 / CID 3016 | Generator bearing 1 or bearing 2 temperature sensor circuit fault | RTD sensor open or shorted, damaged wiring/connector, or an actual bearing overtemperature condition | Check RTD resistance against the expected temperature-resistance curve, inspect wiring and connectors, and confirm actual bearing temperature and lubrication/cooling if the sensor circuit itself checks out |
| CID 2780 / CID 2781 | Generator stator winding 1 or winding 2 temperature sensor circuit fault | RTD circuit fault (open/short/connector corrosion) or genuine winding overtemperature from restricted generator cooling airflow | Verify RTD wiring and connectors, inspect the generator cooling fan and air filtration, and read live winding temperature on Cat ET to confirm whether the fault is sensor-side or a real thermal event |
| CID 2800 | Excitation Field Regulator (EFR) diagnostic feedback fault, reported by the Drivetrain ECM | The EFR's PWM feedback duty cycle falls outside the normal 10 percent (not enabled) or 50 percent (normal, no fault) range, pointing to a wiring fault between the Drivetrain ECM and EFR or an internal EFR problem | Check the PWM feedback wiring and connectors between the Drivetrain ECM and EFR, confirm EFR power supply, and view live duty cycle on Cat ET |
| CID 3500 | Excitation Field Regulator (EFR) current feedback circuit fault | Open or shorted current-feedback sense circuit, or a failed EFR module | Inspect the current-feedback wiring and connector, and test/replace the EFR module per the electric drive system service procedure if wiring checks out |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
795F AC attachments & work tools
Dump body families
Two factory-engineered body lines are offered: MSD II (Mine Specific Design) sized to the mine's fragmentation, abrasion, cohesion and loading tool, and the Gateless Coal Body built for dedicated coal haulage without a tailgate. Both are chassis-matched, not aftermarket bolt-ons.
MSD II body sizes and extension kits
Base MSD II bodies come in 181 m3 (237 yd3) and 220 m3 (288 yd3) sizes. Bolt-on extension kits (roughly 400 mm/15 in, 395 mm/15 in, 550 mm/21 in and 675 mm/26 in) raise heaped capacity up to about 248-252 m3 (324-330 yd3); overall struck/heaped range across the MSD II line runs about 121.5-252 m3 (159-330 yd3) at 100% fill factor.
Gateless Coal Body and extensions
Base Gateless Coal Body capacity is about 352 m3 (460 yd3). Extension kits (about 440 mm/17 in, 875 mm/34 in and 1060 mm/41 in) step capacity up to roughly 382, 413 and 428 m3 (500, 540 and 560 yd3). Eliminating the tailgate reduces jamming, weight and maintenance for coal-specific service.
Body mounting and hoist system
Bodies bolt to model-specific mounting groups (separate MSD II vs Gateless Coal mounting kits) rather than a quick-coupler. Raise/lower is by twin two-stage hydraulic hoist cylinders mounted inside the main frame, power-raised in both stages and power-lowered in the second stage, with automatic body-lower modulation to cut frame impact; typical high-idle body raise time is about 19 seconds.
Body liner and heat options
Optional body liner packages and body films tailor wear protection to material type, and an optional body heat system helps prevent sticky or freezing material from hanging up in cold climates. Liner choice is matched to the body and application rather than sold as a universal kit.
Tire and wheel compatibility
Standard/approved radial tires for the class are 56/80R63 and 59/80R63; gross machine weight is engineered to stay within tire manufacturer loading guidelines for these sizes, and TKPH/TMPH limits still govern practical duty cycle. Optional 1041 mm (41 in) wedge wheels are offered as an alternate wheel arrangement.
Access, guarding and platform options
Standard 600 mm (24 in) stairways are backed by optional configurations: powered access stairway, fixed reversed access, powered reversed access, and a rear chassis access platform. Standard driveline guards and a specified engine guard clearance protect running gear; these are factory-fit safety/access options rather than work tools.
Towing and rigging attachment points
Standard equipment includes front tow hooks and pin and a rear tow pin (empty truck only), plus an auxiliary steering quick connect and a brake release motor, both intended for towing a disabled unit. An auxiliary 'buddy' dumping quick connect is also standard, letting a second truck's hydraulics dump the body if the primary hoist system is down.
Loading and payload-matching aids
Standard external payload indicator lights (with an optional external digital payload display) help the loading tool operator hit target payload and avoid overloading the body. Optional Road Analysis Control measures frame rack, bias and pitch to flag haul road issues affecting body and structure life; these are monitoring add-ons tied to loading-tool matching, not physical attachments.
All 795F AC assemblies by section
Every catalogued assembly group for the Caterpillar 795F AC. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
284-5826 Aftercooler Gp
| 17***31 | Washer; (26x135x12-mm Thk) | 8 |
| 28***26 | Aftercooler Group | 1 |
| 30***96 | Support As | 1 |
267-2180 Air Cleaner Gp
| 18***15 | Nut-Hex Flange; (M10x1.5-Thd) | 34 |
| 1S***65 | Guard-Dust Valve | 3 |
| 1S***85 | Valve-Air Cleaner Dust | 3 |
284-5907 Air Cleaner Gp
| 09***53 | Rod End Bearing | 2 |
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
| 12***47 | Spacer; (17x30x20-mm Thk) | 4 |
324-5552 Fitting Gp-Exhaust
| 24***93 | Clamp As; (V-Band) | 8 |
| 31***09 | Bellows As | 4 |
| 32***52 | Fitting Group-Exhaust | 1 |
284-5816 Lines Gp-Air -Aftercooler
| 13***40 | Clamp As | 8 |
| 13***61 | Clamp | 24 |
| 15***69 | Hose | 2 |
284-5814 Lines Gp-Air -Aftercooler, Inlet
| 20***78 | Spacer; (16x19.05x10-mm Thk) | 4 |
| 21***13 | Clamp | 16 |
| 23***99 | Rod As | 2 |
304-3285 Lines Gp-Exhaust
| 19***67 | Washer-Hard; (13.5x30x12-mm Thk) | 28 |
| 1W***61 | C-Clamp | 2 |
| 26***79 | Manifold | 2 |
289-6083 Manifold Gp-Exhaust -Front Section
| 24***75 | Clamp As | 4 |
| 24***24 | Gasket | 2 |
| 25***98 | Manifold | 1 |
349-3980 Manifold Gp-Exhaust -Inlet, Turbine
| 12***14 | Bolt; (M16x2x50-mm) | 2 |
| 24***24 | Gasket | 2 |
| 30***89 | Clamp-Band | 8 |
289-6087 Manifold Gp-Exhaust -Rear Section
| 24***13 | Manifold | 1 |
| 24***14 | Manifold | 1 |
| 24***75 | Clamp As | 4 |
343-8726 Manifold Gp-Inlet -End Section
| 21***78 | Seal-O-Ring | 1 |
| 24***70 | Plug | 2 |
| 25***26 | Gasket | 4 |
296-3975 Manifold Gp-Inlet -Center Section
| 25***26 | Gasket | 4 |
| 29***61 | Connector | 2 |
| 29***85 | Manifold-Inlet | 2 |
296-3976 Manifold Gp-Inlet -Center Section
| 25***26 | Gasket | 4 |
| 29***61 | Connector | 2 |
| 29***79 | Manifold-Inlet | 1 |
296-3974 Manifold Gp-Inlet -End Section
| 25***26 | Gasket | 4 |
| 29***61 | Connector | 2 |
| 29***80 | Manifold-Inlet | 1 |
243-6449 Mounting Gp-Turbocharger
| 13***35 | Dowel | 4 |
| 24***49 | Mounting Group-Turbocharger | 1 |
| 24***50 | Support | 1 |
284-5806 Muffler Gp
| 24***92 | Bracket As | 3 |
| 28***06 | Muffler Group | 1 |
| 30***36 | Clamp-Band | 2 |
284-5880 Pipe Gp-Exhaust
| 19***67 | Washer-Hard; (13.5x30x12-mm Thk) | 8 |
| 1W***61 | C-Clamp | 2 |
| 24***10 | Clamp | 2 |
308-0285 Pipe Gp-Exhaust -Field Installed
| 16***49 | Bolt; (M12x1.75x60-mm) | 4 |
| 27***27 | Stud | 8 |
| 30***36 | Clamp-Band | 2 |
330-0234 Pipe Gp-Exhaust
| 24***69 | Pipe-Extension | 2 |
| 33***34 | Pipe Group-Exhaust | 1 |
307-8418 Plate Gp-Cover
| 30***24 | Plate | 1 |
| 30***18 | Plate Group-Cover | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 4 |
304-5217 Precleaner Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 28***75 | Breather Baffle, Baffle, Hose | 1 |
| 28***15 | Precleaner Group-Cab Air | 1 |
296-5161 Turbocharger Gp
| 22***90 | Seal-O-Ring | 1 |
| 22***03 | Seal-O-Ring | 1 |
| 29***61 | Turbocharger Group | 1 |
343-5684 Turbocharger Gp
| 24***20 | Housing-Turbine | 1 |
| 27***20 | Seal-O-Ring | 1 |
| 28***94 | Clamp As; (Turbine) | 1 |
Basic Engine
261-4881 Air Compressor Gp
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 6 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 8 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
250-7096 Air Compressor Gp
| 12***22 | Gasket | 1 |
| 1D***39 | Bolt-Top Tank,Bottom Tank To Accessory | 2 |
| 21***68 | Governor As | 1 |
348-6914 Camshaft Gp -Single
| 10***01 | Stud-Taperlock; (M10x1.5x65-mm) | 8 |
| 22***05 | Seal-O-Ring | 1 |
| 24***89 | Pin As-Timing | 1 |
322-8380 Connecting Rod Gp -Lh
| 22***09 | Bearing-Sleeve | 1 |
| 29***41 | Bolt-Connecting Rod | 6 |
| 31***62 | Rod As-Connecting; (Lh) | 1 |
322-8381 Connecting Rod Gp -Rh
| 22***09 | Bearing-Sleeve | 1 |
| 29***41 | Bolt-Connecting Rod | 6 |
| 31***63 | Rod As-Connecting; (Rh) | 1 |
306-8136 Cover Gp-Cylinder Block -Ported
| 24***74 | Plug | 1 |
| 27***59 | Seal | 1 |
| 30***23 | Cover | 1 |
345-9490 Cover Gp-Cylinder Block
| 1N***14 | Cover-Cylinder Block Side | 1 |
| 27***59 | Seal | 1 |
| 34***90 | Cover Group-Cylinder Block | 1 |
273-4035 Cover Gp-Flywheel Housing
| 21***39 | Seal-O-Ring | 2 |
| 21***84 | Plug | 2 |
| 22***05 | Seal-O-Ring | 1 |
273-4003 Cover Gp-Front Housing -Accessory Drive
| 16***52 | Seal-O-Ring | 1 |
| 21***97 | Plug | 2 |
| 22***03 | Seal-O-Ring | 2 |
281-6523 Cover Gp-Front Housing -Air Compressor Drive
| 12***22 | Gasket | 1 |
| 22***00 | Seal-O-Ring | 1 |
| 24***57 | Plug | 1 |
331-3652 Cover Gp-Valve Mechanism
| 23***40 | Seal-Valve Cover | 1 |
| 33***50 | Cover | 1 |
| 33***52 | Cover Group-Valve Mechanism | 1 |
318-3128 Crankshaft Gp
| 09***93 | Pin-Spring | 14 |
| 14***73 | Dowel | 1 |
| 23***06 | Bolt As | 34 |
342-7301 Cylinder Block As
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 18 |
| 24***49 | Nut; (M30x2-Thd) | 18 |
| 24***96 | Plate | 9 |
342-7302 Cylinder Block Gp
| 24***70 | Plug | 1 |
| 24***84 | Orifice | 2 |
| 24***85 | Orifice | 6 |
345-8447 Cylinder Head As
| 24***74 | Seal-O-Ring | 2 |
| 26***53 | Plug | 1 |
| 27***23 | Insert-Valve; (Inlet) | 2 |
345-8449 Cylinder Head Gp
| 15***95 | Washer-Hard; (24x36x4.5-mm Thk) | 6 |
| 25***25 | Gasket-Combustion | 1 |
| 27***01 | Bolt-12 Point Head; (M22x1.5x380-mm) | 6 |
345-8448 Cylinder Head Gp
| 19***55 | Lock-Retainer; (Exhaust) | 8 |
| 23***44 | Guide-Valve | 4 |
| 25***73 | Valve-Exhaust | 2 |
334-6157 Damper Gp
| 10***11 | Plug, Includes: | 2 |
| 1S***99 | Dowel | 1 |
| 24***57 | Plug | 1 |
345-8466 Dowel Gp-Cylinder Block
| 06***38 | Seal-O-Ring; (7.65 mm Id) | 2 |
| 34***32 | Dowel | 1 |
| 34***66 | Dowel Group-Cylinder Block | 1 |
259-6707 Drive Gp-Accessory -Air And Refrigerant Compressor
| 11***91 | Bushing | 1 |
| 16***52 | Seal-O-Ring | 1 |
| 21***98 | Plug | 2 |
329-8191 Drive Gp-Accessory -Pto
| 10***21 | Seal; (Dirt) | 1 |
| 10***22 | Seal-Lip Type | 1 |
| 14***95 | Bearing-Sleeve | 1 |
345-9491 Fastener Gp-Cover -Cylinder Block
| 33***90 | Lockwasher | 1 |
| 34***91 | Fastener Group-Cover; -Cylinder Block | 1 |
| 9X***25 | Bolt-Self Lock Plt; (M10 X 1.5 X 25) | 1 |
283-1676 Fastener Gp-Damper
| 24***12 | Bolt-12 Point Head; (M24x2x204-mm) | 12 |
| 28***76 | Fastener Group-Damper | 1 |
| 28***77 | Spacer | 1 |
339-0322 Flywheel Gp
| 10***11 | Plug, Includes: | 2 |
| 23***43 | Gear-Flywheel; (183-Teeth) | 1 |
| 24***57 | Plug | 1 |
348-2175 Gear Gp-Front
| 10***44 | Plug | 1 |
| 16***52 | Seal-O-Ring | 2 |
| 21***98 | Plug | 4 |
327-0824 Gear Gp-Rear
| 24***55 | Gear-Camshaft; (82-Teeth) | 1 |
| 24***03 | Plate-Cam | 1 |
| 25***75 | Gear-Crankshaft; (82-Teeth) | 1 |
333-0645 Guard Gp-Belt
| 19***66 | Washer-Hard; (11x25x10-mm Thk) | 9 |
| 33***45 | Guard Group-Belt | 1 |
| 33***25 | Guard | 1 |
329-9378 Guard Gp-Damper
| 11***75 | Washer; (13.5x32x8-mm Thk) | 3 |
| 1P***15 | Grommet Assem. | 4 |
| 2S***60 | Washer,Flat Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
252-6061 Housing Gp-Flywheel
| 19***67 | Seal-O-Ring | 4 |
| 21***65 | Seal-O-Ring | 1 |
| 24***57 | Plug | 4 |
330-4461 Housing Gp-Front
| 19***67 | Seal-O-Ring | 2 |
| 22***71 | Bolt-12 Point Head; (M16x2x45-mm) | 4 |
| 22***02 | Seal-O-Ring | 6 |
357-4825 Lifter Gp-Valve
| 1W***17 | Dowel-Hollow | 2 |
| 24***77 | Sleeve | 1 |
| 28***70 | Lifter As-Valve | 4 |
357-4826 Lifter Gp-Valve
| 24***00 | Seal-Integral; (Valve Mechanism) | 1 |
| 35***25 | Lifter Group-Valve | 1 |
| 35***26 | Lifter Group-Valve | 1 |
283-9331 Lifting Gp-Engine -Engine Mounted
| 16***20 | Bolt-Socket Head; (M24x3x80-mm) | 8 |
| 28***25 | Bracket-Lifting | 2 |
| 28***31 | Lifting Group-Engine; -Engine Mounted | 1 |
328-7097 Lifting Gp-Engine -With Clasp
| 28***37 | Eye-Lifting | 2 |
| 28***55 | Pin As | 2 |
| 32***97 | Lifting Group-Engine; -With Clasp | 1 |
317-6283 Liner Gp-Cylinder Block
| 25***50 | Seal-O-Ring | 3 |
| 31***41 | Liner-Cylinder Block | 1 |
| 31***42 | Sleeve | 1 |
281-6527 Lines Gp-Air Compressor
| 06***38 | Seal-O-Ring; (7.65 mm Id) | 1 |
| 12***05 | Elbow | 1 |
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 2 |
347-8894 Mounting Gp-Alternator
| 13***18 | Seal-O-Ring; (Camshaft) | 1 |
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 1 |
| 16***92 | Bolt; (M10x1.5x85-mm) | 1 |
300-5521 Pan Gp-Oil
| 10***62 | Dowel | 2 |
| 10***80 | Seal-O-Ring (Id=177.17mm) | 1 |
| 11***27 | Fitting; (Quick Disconnect, Male) | 1 |
293-5430 Piston Gp
| 1W***17 | Dowel-Hollow | 2 |
| 20***94 | Bolt-Flange Head; (M10x1.5x35-mm) | 2 |
| 23***51 | Pin-Piston | 1 |
327-2725 Platform Gp-Engine
| 19***67 | Washer-Hard; (13.5x30x12-mm Thk) | 60 |
| 27***37 | Support | 1 |
| 30***39 | Bracket | 4 |
250-9989 Plug Gp-Cylinder Block -Control, Rh
| 22***01 | Seal-O-Ring | 9 |
| 24***70 | Plug | 9 |
| 25***89 | Plug Group-Cylinder Block; -Control, Rh | 1 |
250-1792 Plug Gp-Cylinder Block -Control, Lh
| 22***01 | Seal-O-Ring | 10 |
| 24***70 | Plug | 10 |
| 25***92 | Plug Group-Cylinder Block; -Control, Lh | 1 |
322-2927 Plug Gp-Cylinder Block
| 24***71 | Plug | 1 |
| 32***27 | Plug Group-Cylinder Block | 1 |
| 8T***25 | Seal; (29.3mm Od) | 1 |
319-8582 Plug Gp-Cylinder Block -Cooling System
| 24***71 | Plug | 1 |
| 24***30 | Plug As | 4 |
| 31***82 | Plug Group-Cylinder Block; -Cooling System | 1 |
294-5659 Plug Gp-Engine -Exhaust Port
| 29***59 | Plug Group-Engine; -Exhaust Port | 1 |
| 3E***31 | Plug-Straight Thread | 2 |
317-1630 Plug Gp-Front Housing
| 22***35 | Plug | 1 |
| 22***99 | Seal-O-Ring | 1 |
| 24***57 | Plug | 2 |
248-4115 Seal Gp-Crankshaft
| 24***74 | Seal Group-Crankshaft | 1 |
| 24***75 | Seal Group-Crankshaft | 1 |
| 24***15 | Seal Group-Crankshaft | 1 |
293-0351 Step Gp
| 19***66 | Washer-Hard; (11x25x10-mm Thk) | 8 |
| 29***39 | Step As | 1 |
| 29***51 | Step Group | 1 |
284-5812 Support Gp-Engine
| 19***82 | Washer-Hard; (26x47x12-mm Thk) | 4 |
| 26***36 | Bolt-12 Point Head | 6 |
| 26***53 | Support As | 1 |
302-5925 Support Gp-Engine -Lifting
| 30***05 | Bracket | 1 |
| 30***25 | Support Group-Engine; -Lifting | 1 |
| 6V***44 | Bolt; (M16x2.0x35mm) | 1 |
250-7062 Trunnion Gp-Engine
| 17***10 | Washer-Hard; (17.5x32x7-mm Thk) | 20 |
| 25***62 | Trunnion Group-Engine | 1 |
| 25***63 | Support-Outer | 1 |
325-2666 Valve Mechanism Gp
| 23***38 | Button | 2 |
| 23***40 | Screw-Adjustment | 2 |
| 24***22 | Nut; (M14x1.5-Thd) | 2 |
Braking System
300-3905 Accumulator Gp-Brake -Charged
| 11***10 | Protector-Gas Valve | 1 |
| 15***06 | Valve-Gas | 1 |
| 17***94 | Kit-Seal; (Ride Control Accumulator) | 1 |
348-9272 Accumulator Gp-Brake -Charged
| 11***10 | Protector-Gas Valve | 1 |
| 17***94 | Kit-Seal; (Ride Control Accumulator) | 1 |
| 19***50 | Core | 1 |
250-3934 Brake Gp-Service & Parking -Rear
| 12***72 | Seal-Ring (680.00mm Id) | 1 |
| 12***74 | Seal-Ring (768.4mm Id) | 1 |
| 12***77 | Seal-Ring | 1 |
292-3260 Brake Gp-Service & Parking -Front
| 12***72 | Seal-Ring (680.00mm Id) | 1 |
| 12***74 | Seal-Ring (768.4mm Id) | 1 |
| 12***77 | Seal-Ring | 1 |
325-0935 Control Gp-Brake
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 11***18 | Valve-Drain; (Hydraulic Tank) | 1 |
360-3159 Control Gp-Service Brake -European Market
| 22***92 | Seal-O-Ring | 2 |
| 23***80 | Seal-O-Ring | 1 |
| 23***82 | Seal-O-Ring | 1 |
325-7963 Control Gp-Service Brake
| 12***50 | Valve-Check; (Quick Coupler Solenoid) | 1 |
| 12***72 | Tee | 1 |
| 14***95 | Plug As | 1 |
295-9924 Control Gp-Service Brake
| 29***02 | Cover | 1 |
| 29***24 | Control Group-Service Brake | 1 |
| 31***35 | Control Group-Foot Brake | 1 |
325-7975 Control Gp-Service Brake
| 29***67 | Filter Group-Oil; -Brake | 1 |
| 30***08 | Bracket | 1 |
| 32***75 | Control Group-Service Brake | 1 |
290-2567 Filter Gp-Oil
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 1 |
| 29***67 | Filter Group-Oil; -Brake | 1 |
| 29***45 | Filter Element As-Oil | 1 |
339-9702 Filter Gp-Oil -Brake Oil Cooler Lines
| 33***73 | Cover | 1 |
| 33***02 | Filter Group-Oil; -Brake Oil Cooler Lines | 1 |
| 34***02 | Filter Element-Oil; (Hydraulic)(Brake Cooling) | 1 |
339-3573 Indicator Gp-Brake Wear
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 20***28 | Seal-O-Ring | 1 |
| 28***76 | Sensor Group-Position; (Brake Wear Indicator) | 2 |
291-6887 Lines Gp-Brake
| 14***30 | Bracket As | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 3 |
| 16***93 | Hose As | 1 |
291-6886 Lines Gp-Brake Cooling -Rear Axle
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 8 |
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 16 |
| 1P***84 | Flange-Half | 12 |
291-6884 Lines Gp-Brake Oil Cooler
| 03***31 | Seal-O-Ring | 1 |
| 10***73 | Clip | 2 |
| 12***55 | Spacer; (11.5x20x26-mm Thk) | 1 |
5t-1060 Pump & Motor Gp-Brake Release -Parking, Secondary
| 01***80 | Lockwasher | 8 |
| 1T***16 | Bolt; (5/16-18x0.75-In)(12 Point Hd) | 4 |
| 1V***95 | Coupling | 1 |
293-2208 Retarder Gp-Electric -Retarding Grid
| 29***08 | Retarder Group-Electric; -Retarding Grid | 1 |
| 31***76 | Resistor | 3 |
| 31***77 | Resistor | 1 |
292-4258 Retarder Gp-Electric
| 29***58 | Retarder Group-Electric | 1 |
| 29***08 | Retarder Group-Electric; -Retarding Grid | 1 |
205-0560 Slack Adjuster Gp
| 1S***90 | Spring-Diaphragm | 2 |
| 20***60 | Slack Adjuster Group; -Rear | 1 |
| 20***61 | Piston As | 2 |
285-5630 Valve Gp-Brake Control -Service Brake, Parking Brake
| 11***03 | Seal-O-Ring; (10.82mm Id) | 1 |
| 12***79 | Kit-Seal; (Check Valve)(Hydraulic Fan, Reversing) | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
6e-4701 Valve Gp-Check
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6E***01 | Valve Group-Check; -Pilot Oil | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 1 |
302-8414 Valve Gp-Diverter
| 03***06 | Seal (Use As Required) | 1 |
| 03***31 | Seal-O-Ring | 1 |
| 12***66 | Plug | 1 |
Cooling System
291-8388 Connection Gp-Water -Auxiliary
| 10***12 | Plug, Includes: | 2 |
| 24***58 | Plug | 1 |
| 25***46 | Elbow | 1 |
318-0687 Connection Gp-Water -Jacket Water
| 24***57 | Plug | 1 |
| 25***86 | Valve-Shutoff | 1 |
| 25***48 | Elbow | 1 |
317-3680 Cooler Gp-Engine Oil
| 31***80 | Cooler Group-Engine Oil | 1 |
| 34***49 | Cooler Group-Engine Oil | 1 |
| 6V***23 | Bolt; (M12x1.75x60-mm) | 1 |
348-8249 Cooler Gp-Engine Oil
| 19***67 | Washer-Hard; (13.5x30x12-mm Thk) | 6 |
| 24***53 | Bracket | 1 |
| 24***54 | Bracket | 1 |
284-5821 Cooling Ar -Low Altitude Application
| 28***21 | Cooling Ar; -Low Altitude Application | 1 |
| 28***26 | Aftercooler Group | 1 |
| 28***30 | Lines Group-Water | 1 |
291-6885 Core Gp-Oil Cooler -Brake
| 13***84 | Bolt-Socket Head; (M8x1.25x40-mm) | 20 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 4 |
| 18***06 | Plug As; (High Temperature) | 2 |
1n-3599 Cover Gp-Radiator Cap
| 1M***49 | Ring (5.313" Dia.) | 1 |
| 1N***99 | Cover Group-Protection; Radiator Cap Protection Cover Group | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
284-5832 Fan Gp-Suction
| 00***48 | Clip | 2 |
| 14***13 | Hose | 1 |
| 15***62 | Hose | 1 |
318-0686 Lines Gp-Turbocharger Water
| 21***90 | Elbow | 1 |
| 21***78 | Seal-O-Ring | 16 |
| 25***43 | Seal-O-Ring | 17 |
284-5862 Lines Gp-Water
| 00***89 | Valve As-Drain | 1 |
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
284-5830 Lines Gp-Water
| 00***48 | Clip | 1 |
| 10***84 | Dial | 1 |
| 14***13 | Hose | 4 |
333-3706 Lines Gp-Water -Lower
| 10***92 | Grommet | 1 |
| 10***77 | Seal-O-Ring; (100.97mm Id) | 2 |
| 10***80 | Seal-O-Ring | 2 |
341-2377 Module-Control -Temperature
| 28***43 | Strap-Ground | 1 |
| 28***44 | Screw; (8-32x0.25-In) | 1 |
| 34***77 | Module-Control; (Temperature) | 1 |
312-7707 Pump Gp-Auxiliary Water
| 24***65 | Stud-Taperlock; (M10x1.5x79-mm) | 4 |
| 25***22 | Cover | 1 |
| 27***26 | Seal | 1 |
312-0964 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 16***74 | Ring As | 1 |
| 16***76 | Seal Group-Water Pump; (Face Type) | 1 |
313-7600 Pump Gp-Water
| 06***38 | Seal-O-Ring; (7.65 mm Id) | 1 |
| 19***16 | Seal-O-Ring | 1 |
| 19***67 | Seal-O-Ring | 1 |
313-2758 Pump Gp-Water
| 13***42 | Filter-Water Pump | 1 |
| 22***72 | Locknut-Bearing | 1 |
| 23***81 | Bearing As | 1 |
284-5831 Radiator Gp
| 03***02 | Elbow; (90 Degree) | 1 |
| 14***08 | Plug As. | 1 |
| 14***54 | Angle As | 4 |
286-4571 Valve Gp-Thermostatic -Electronic Temperature Control
| 11***82 | Seal-O-Ring; (16.36mm Id) | 1 |
| 11***06 | Seal-O-Ring | 1 |
| 20***78 | Bolt-Flange Head | 4 |
Electrical And Starting System
272-1889 Alternator Gp-Charging
| 27***89 | Alternator Group-Charging | 1 |
285-1141 Application Gp-Monitor -Vims
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 28***41 | Application Group-Monitor; -Vims-Product Link | 1 |
| 28***42 | Control Group-Unprogrammed; (Vims) | 1 |
298-8219 Battery Gp -Electric Start
| 15***20 | Battery; (12-Volt)(12-Volt) | 4 |
| 15***49 | Cable-Electrical; (03050 mm ) | 0 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
298-8218 Battery Gp
| 15***20 | Battery; (12-Volt)(12-Volt) | 2 |
| 15***49 | Cable-Electrical; (03050 mm ) | 0 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
300-7721 Box Gp-Junction -Electric Motor, Wheel Traction
| 10***34 | Kit-Receptacle; (12-Pin)(Valve Cover & Inj Harness) | 1 |
| 30***21 | Box Group-Junction; -Electric Motor, Wheel Traction | 1 |
| 30***23 | Terminal | 23 |
347-4748 Bus Bar Gp -Inverter Cabinet
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 17***21 | Washer-Bellevile | 300 |
| 21***64 | Washer; (8.4x15.5x1.6-mm Thk) | 66 |
284-5807 Cable Gp-Electric Retarder
| 17***21 | Washer-Bellevile | 62 |
| 1P***10 | Tape (Order By The Meter) (Use As | 0 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
284-5858 Cable Gp-Power Train -Wheel Traction
| 17***20 | Nut; (M10x1.5-Thd)(M10x1.5-Thd) | 16 |
| 17***21 | Washer-Bellevile | 72 |
| 1P***10 | Tape (Order By The Meter) (Use As | 0 |
292-0524 Camera Ar -Work Area Visual System
| 27***32 | Wiring Group-Monitor | 1 |
| 29***24 | Camera Ar; -Work Area Visual System | 1 |
| 31***79 | Wiring Group-Camera; -Work Area Visual System | 1 |
337-5723 Capacitor Gp
| 13***58 | Washer-Bellevile | 2 |
| 21***64 | Washer; (8.4x15.5x1.6-mm Thk) | 6 |
| 32***49 | Capacitor | 4 |
336-6710 Circuit Breaker Gp
| 17***15 | Circuit Breaker As; (150-Ampere) | 2 |
| 25***11 | Lockwasher | 2 |
| 32***19 | Plate | 1 |
283-6768 Conduit Gp-Electrical
| 09***12 | Clip | 7 |
| 1H***38 | Lockwasher, External Tooth (1/4); W/O Freespool Qty Is 6 | 7 |
| 1S***27 | Connector; (1/2in-45 Deg) | 1 |
346-4358 Control & Mtg Gp-Electronic
| 33***77 | Electronics Group-Machine; -Integrated Brake | 1 |
| 33***78 | Electronics Group-Machine; -Chassis | 1 |
| 33***79 | Electronics Group-Power Train | 1 |
330-0140 Control & Mtg Gp-Engine Elek
| 19***67 | Washer-Hard; (13.5x30x12-mm Thk) | 2 |
| 31***87 | Bracket As | 1 |
| 33***40 | Control & Mtg Group-Engine Elek | 1 |
291-6877 Control Gp-Air Starting
| 00***54 | Nipple-Pipe | 1 |
| 00***28 | Nipple; (Close)(1/4-18 Npt) | 1 |
| 03***70 | Adapter-Pipe | 1 |
277-3341 Control Gp-Machine -Ground Level Shutdown
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 16 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 24 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
321-0940 Control Gp-Unprogrammed -Power Converter
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 2L***75 | Terminal; (14-Ga To 16-Ga, No. 8 Screw)(Relay Switch "B" & "S") | 1 |
| 2L***78 | Terminal-Ring; (14-Ga To 16-Ga, 5/16-In Screw) | 1 |
303-2381 Control Gp-Unprogrammed
| 30***81 | Control Group-Unprogrammed | 1 |
331-7178 Electronics Gp-Machine -Chassis
| 33***78 | Electronics Group-Machine; -Chassis | 1 |
| 36***38 | Software Group-Machine; (Chassis) | 1 |
| 36***39 | Service Group-Machine; (Chassis) | 1 |
331-7177 Electronics Gp-Machine -Integrated Brake
| 33***77 | Electronics Group-Machine; -Integrated Brake | 1 |
| 35***11 | Software Group-Machine | 1 |
| 35***12 | Service Group-Machine | 1 |
339-4503 Electronics Gp-Monitor -Vims 3g Application
| 32***20 | Software Group-Monitor; (Vims Application, Program) | 1 |
| 33***24 | Software Group-Monitor; (Vims Application, Configure) | 1 |
| 33***03 | Electronics Group-Monitor; -Vims 3g Application | 1 |
339-4499 Electronics Gp-Monitor -Vims 3g Main
| 32***18 | Software Group-Monitor; (Vims Main, Program) | 1 |
| 33***02 | Software Group-Monitor; (Vims Main, Configure) | 1 |
| 33***99 | Electronics Group-Monitor; -Vims 3g Main, Flexible Hose | 1 |
339-8903 Electronics Gp-Monitor -Czech, Danish, English, Finnish, Hungarian, Icelandic, Polish, Russian
| 33***03 | Electronics Group-Monitor; -Czech, Danish, English, Finnish, Hungarian, Icelandic, Polish, Russian | 1 |
| 34***57 | Software Group-Monitor | 1 |
| 34***58 | Service Group-Monitor | 1 |
339-8905 Electronics Gp-Monitor -Chinese, English, Korean, Japanese
| 33***05 | Electronics Group-Monitor; -Chinese, English, Korean, Japanese | 1 |
| 34***61 | Software Group-Monitor | 1 |
| 34***62 | Service Group-Monitor | 1 |
339-8904 Electronics Gp-Monitor -English, French, Indonesian, Malaysian, Thai, Vietnamese
| 33***04 | Electronics Group-Monitor; -English, French, Indonesian, Malaysian, Thai, Vietnamese | 1 |
| 34***59 | Software Group-Monitor | 1 |
| 34***60 | Service Group-Monitor | 1 |
339-8902 Electronics Gp-Monitor -English, Estonian, Greek, Latvian, Lithuanian, Romanian, Slavokian, Slovenian
| 33***02 | Electronics Group-Monitor; -English, Estonian, Greek, Latvian, Lithuanian, Romanian, Slavokian, Slovenian | 1 |
| 34***55 | Software Group-Monitor | 1 |
| 34***56 | Service Group-Monitor | 1 |
339-8906 Electronics Gp-Monitor -Arabic, Croatian, English, Hebrew, Mongolian, Serbian, Turkish
| 33***06 | Electronics Group-Monitor; -Arabic, Croatian, English, Hebrew, Mongolian, Serbian, Turkish | 1 |
| 34***63 | Software Group-Monitor | 1 |
| 34***64 | Service Group-Monitor | 1 |
339-8901 Electronics Gp-Monitor -Dutch, English, French, German, Italian, Norwegian, Portuguese, Spanish, Swedish
| 33***01 | Electronics Group-Monitor; -Dutch, English, French, German, Italian, Norwegian, Portuguese, Spanish, Swedish | 1 |
| 34***53 | Software Group-Monitor | 1 |
| 34***54 | Service Group-Monitor | 1 |
331-7179 Electronics Gp-Power Train
| 33***79 | Electronics Group-Power Train | 1 |
| 35***23 | Software Group-Power Trian | 1 |
| 35***24 | Service Group-Power Train | 1 |
331-7184 Enabler Gp-Feature -Throttle Lock
| 27***81 | Configuration-Premium | 1 |
| 33***84 | Enabler Group-Feature; -Throttle Lock | 1 |
335-1680 Guard Gp-Cable -Electric Retarder
| 23***51 | Screw-Button Head; (M10x1.5x25-mm) | 2 |
| 2M***95 | Pin,Straight,Headed | 1 |
| 32***30 | Cover As | 1 |
333-2695 Guard Gp-Cable -Electric Retarder
| 33***95 | Guard Group-Cable; -Electric Retarder | 1 |
| 33***19 | Plate | 1 |
| 33***20 | Plate | 1 |
284-3932 Heater Gp-Engine Oil
| 26***11 | Element As-Engine Oil Heater; (240-Volt, 500-Watt) | 3 |
| 28***32 | Heater Group-Engine Oil | 1 |
| 28***05 | Housing-Thermostat | 1 |
298-8222 Installation Ar-Payload
| 27***18 | Lamp Group-Signal; -Payload, Display | 1 |
| 29***22 | Installation Ar-Payload | 1 |
| 29***45 | Wiring Group-Monitor; -Payload | 1 |
307-2580 Installation Gp-Communication -Product Link
| 27***31 | Wiring Group-Communication; -Product Link | 1 |
| 30***80 | Installation Group-Communication; -Product Link | 1 |
| 30***81 | Mounting Group-Antenna; -Product Link | 1 |
290-8117 Lamp Gp-Flood -Hid, Front
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 22***70 | Lens As | 1 |
| 22***74 | Bezel; (Hid) | 1 |
219-6485 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
272-6641 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
164-7600 Lamp Gp-Flood
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
| 16***00 | Lamp Group-Flood; -Engine Work, Rh, Lh-Stairway | 1 |
290-8118 Lamp Gp-Flood -Front Hid
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 15***54 | Bolt; (M10x1.5x40-mm) | 1 |
| 22***70 | Lens As | 1 |
283-8144 Lamp Gp-Flood -Hid
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 22***74 | Bezel; (Hid) | 1 |
| 27***82 | Lens As; (Hid) | 1 |
164-7595 Lamp Gp-Head
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
| 16***77 | Lens As; (Headlight, Low Beam) | 1 |
164-7599 Lamp Gp-Head
| 15***49 | Lens As; (Headlight, High Beam) | 1 |
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
135-0427 Lamp Gp-Signal -Park, Turn
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***27 | Lamp Group-Signal; -Park, Turn | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
276-6118 Lamp Gp-Signal -Payload, Display
| 09***92 | Washer, Tooth | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 2 |
298-8223 Lighting Gp-Flood & Head
| 16***95 | Lamp Group-Head; -Fog Light | 6 |
| 16***99 | Lamp Group-Head | 2 |
| 16***00 | Lamp Group-Flood; -Engine Work, Rh, Lh-Stairway | 2 |
298-8224 Lighting Gp-Flood & Head -Hid
| 13***00 | Clip; (Tab) | 6 |
| 16***95 | Lamp Group-Head; -Fog Light | 4 |
| 28***44 | Lamp Group-Flood; -Hid-Boom | 2 |
291-6879 Lines Gp-Air Starting
| 10***05 | Adapter-Pipe | 1 |
| 13***34 | Spacer; (11x20x25-mm Thk) | 1 |
| 29***79 | Lines Group-Air Starting | 1 |
291-6878 Lines Gp-Air Starting
| 10***05 | Adapter-Pipe | 1 |
| 13***34 | Spacer; (11x20x25-mm Thk) | 1 |
| 29***78 | Lines Group-Air Starting | 1 |
278-7384 Motor Gp-Electric -Thermostatic
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***65 | Kit-Connecting Plug; (8-Pin)(Electronic Control Channel) | 1 |
| 27***84 | Motor Group-Electric; -Thermostatic | 1 |
347-0886 Mounting Gp-Connector
| 09***26 | Lockwasher-Tooth; (M4 Id) | 8 |
| 13***56 | Washer; (4.3x0.8x0.8-mm Thk) | 8 |
| 19***58 | Screw-Pan Head; (M4x0.7x20-mm) | 8 |
324-0822 Plug Gp-Connector
| 22***35 | Receptacle As; (70-Pin) | 1 |
| 32***22 | Plug Group-Connector | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 2 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 33***45 | Radio Group-Communication; -Product Link 121sr | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
337-6776 Sensor Gp-Current
| 09***05 | Washer-Bellevile | 6 |
| 17***21 | Washer-Bellevile | 16 |
| 20***01 | Washer-Hard; (5.3x10x1-mm Thk) | 6 |
337-5719 Sensor Gp-Current
| 09***05 | Washer-Bellevile | 2 |
| 17***21 | Washer-Bellevile | 2 |
| 20***01 | Washer-Hard; (5.3x10x1-mm Thk) | 2 |
337-6770 Sensor Gp-Current
| 09***05 | Washer-Bellevile | 6 |
| 17***21 | Washer-Bellevile | 24 |
| 20***01 | Washer-Hard; (5.3x10x1-mm Thk) | 6 |
124-9325 Sensor Gp-Fuel Level
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
178-2345 Sensor Gp-Liquid Level
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***34 | Probe As-Liquid Level; (Water Separator) | 1 |
239-9957 Sensor Gp-Liquid Level
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 23***57 | Sensor Group-Liquid Level; -Coolant Loss | 1 |
266-1466 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 26***66 | Sensor Group-Position; -Throttle | 1 |
161-9926 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***26 | Sensor Group-Pressure; -Atmospheric Air, Turbo Inlet | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
221-3416 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 22***16 | Sensor Group-Pressure; -Payload, Lift Cylinder Oil | 1 |
141-5746 Sensor Gp-Pressure
| 14***46 | Sensor Group-Pressure; -Air Start Lines | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
221-3415 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
221-3417 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 22***17 | Sensor Group-Pressure | 1 |
247-1893 Sensor Gp-Speed
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 24***44 | Sensor Group-Speed | 1 |
244-5544 Sensor Gp-Speed
| 13***45 | Pad; (Connector) | 1 |
| 19***03 | Sensor Group-Speed | 1 |
| 24***44 | Sensor Group-Speed | 1 |
250-1791 Sensor Gp-Speed
| 11***85 | Seal-O-Ring; (13.94mm Id) | 2 |
| 19***04 | Sensor Group-Speed; (Primary, Timing, Camshaft) | 1 |
| 19***05 | Sensor Group-Speed; (Secondary, Timing, Camshaft) | 1 |
264-0148 Sensor Gp-Speed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 17***49 | Strap; (Marker) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 4 |
250-0868 Sensor Gp-Temp & Press
| 03***34 | Seal-O-Ring | 1 |
| 1H***59 | Lockwasher-Tooth | 4 |
| 22***00 | Seal-O-Ring | 1 |
134-2252 Sensor Gp-Temperature
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***52 | Sensor Group-Temperature; -Transmission Oil-Xmsn, Torque Converter | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
284-5810 Starting Aid Gp-Ether
| 0A***26 | Fitting | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***28 | Spacer; (11x20x10-mm Thk) | 1 |
342-2329 Starting Aid Gp-Ether
| 06***08 | Bulkhead Tee | 1 |
| 10***91 | Nut-Jam; (3/4-16-Thd) | 1 |
| 1M***81 | Spacer; (0.438x0.75x1-In Thk) | 2 |
291-9963 Starting Ar-Air
| 25***96 | Air Compressor Group | 1 |
| 28***27 | Lines Group-Air Compressor | 1 |
| 29***77 | Control Group-Air Starting | 1 |
291-9961 Starting Ar-Air
| 25***96 | Air Compressor Group | 1 |
| 28***27 | Lines Group-Air Compressor | 1 |
| 29***77 | Control Group-Air Starting | 1 |
284-2734 Starting Ar-Cold Weather
| 21***78 | Seal-O-Ring | 1 |
| 26***27 | Element As-Jacket Water Heater; (240-Volt, 1500-Watt) | 3 |
| 26***24 | Heater Group-Jacket Water | 1 |
291-9964 Starting Ar-Electric
| 27***62 | Starting Motor Group-Electric; -Dual | 1 |
| 29***64 | Starting Ar-Electric | 1 |
| 29***19 | Battery Group; -Electric Start | 1 |
294-5611 Starting Motor Gp-Air
| 29***67 | Washer-Hard | 3 |
| 29***99 | Starting Motor Group-Air | 1 |
| 29***11 | Starting Motor Group-Air | 1 |
294-5612 Starting Motor Gp-Air
| 29***67 | Washer-Hard | 3 |
| 29***12 | Starting Motor Group-Air | 1 |
| 29***13 | Starting Motor Group-Air | 1 |
276-8900 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
277-7662 Starting Motor Gp-Electric -Dual
| 21***54 | Bolt-12 Point Head | 6 |
| 27***00 | Starting Motor Group-Electric | 2 |
| 27***01 | Starting Motor Group-Electric | 1 |
276-8901 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
164-7577 Switch Gp-Bypass
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
292-0362 Switch Gp-Disconnect -Battery
| 29***62 | Switch Group-Disconnect; -Battery | 1 |
| 2H***22 | Lockwasher | 1 |
| 30***07 | Lever-Switch | 1 |
172-8660 Switch Gp-Liquid Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
179-0006 Switch Gp-Magnetic
| 17***06 | Switch Group-Magnetic; -Hydraulic Tank Fill Pump/Motor Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
175-2308 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
118-3534 Switch Gp-Magnetic
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
| 17***09 | Switch Group-Magnetic; -24-Volt-Start Relay | 1 |
175-2309 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***81 | Switch As-Magnetic; (Start Relay) | 1 |
292-0358 Switch Gp-Rotary
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 29***58 | Switch Group-Rotary | 1 |
331-7185 Switch Gp-Timer -Engine Idle Shutdown
| 28***59 | Configuration-Premium | 1 |
| 29***29 | Switch-Rocker; (Engine Idle Shutdown) | 1 |
| 33***85 | Switch Group-Timer; -Engine Idle Shutdown | 1 |
139-2116 Switch Gp-Toggle
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
| 13***16 | Switch Group-Toggle; (Ground Level Ladder Lamp) | 1 |
| 3E***71 | Wedge; (Receptacle Lock) (3 Pin) | 1 |
185-0008 Valve Gp-Solenoid
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 18***08 | Valve Group-Solenoid; -Air Horn | 1 |
337-1029 Wiring Gp-Air Starting
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***72 | Seal; (Conduit Hole) | 1 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
330-0147 Wiring Gp-Alternator
| 03***05 | Terminal-Cable; (00-Ga, 5/16-In Screw) | 1 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 13***89 | Clip; (Ladder) | 1 |
314-3279 Wiring Gp-Camera -Work Area Visual System
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 13***89 | Clip; (Ladder) | 1 |
284-5857 Wiring Gp-Chassis -Front
| 03***05 | Terminal-Cable; (00-Ga, 5/16-In Screw) | 1 |
| 03***48 | Clip; (11.11mm .437in Id) | 12 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 1 |
284-5856 Wiring Gp-Chassis -Rear
| 00***08 | Boot-Terminal | 2 |
| 03***48 | Clip; (11.11mm .437in Id) | 4 |
| 09***01 | Bolt-Socket Head; (M8x1.25x40-mm) | 5 |
276-6131 Wiring Gp-Communication -Product Link
| 26***52 | Film-Warning; (Product Link 300, U.S.) | 1 |
| 26***53 | Film-Warning; (Product Link, Read Omm) | 1 |
| 27***31 | Wiring Group-Communication; -Product Link | 1 |
336-7673 Wiring Gp-Electric Starting
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 2 |
330-0141 Wiring Gp-Electronic Control -Front
| 05***90 | Vent | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 16 |
| 10***13 | Receptacle As-Connector; (70-Pin) | 1 |
330-0143 Wiring Gp-Engine -Rh
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
284-3933 Wiring Gp-Engine
| 14***35 | Clip | 1 |
| 14***02 | Bracket | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 3 |
330-0145 Wiring Gp-Engine -Lh
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
284-5837 Wiring Gp-Front -Radiator
| 06***58 | Spacer | 3 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
339-5020 Wiring Gp-Integrated Brake
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
352-4912 Wiring Gp-Inverter Cabinet
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 80 |
| 13***89 | Terminal As-Ring; (6-Ga To 8-Ga) | 5 |
336-7670 Wiring Gp-Lighting -Stairway, Rh
| 03***25 | Terminal-Ring; (For 3/8" Fastener) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
336-7680 Wiring Gp-Lighting -Stairway, Lh
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
284-5902 Wiring Gp-Lighting -Fender, Lh
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
310-5765 Wiring Gp-Lighting -Rear Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
292-0520 Wiring Gp-Lubrication
| 17***06 | Switch Group-Magnetic; -Hydraulic Tank Fill Pump/Motor Relay | 1 |
| 29***20 | Wiring Group-Lubrication | 1 |
| 29***09 | Cable As | 1 |
292-0518 Wiring Gp-Mirror -Heated
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
337-9173 Wiring Gp-Mirror -Heated
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
298-8345 Wiring Gp-Monitor -Payload
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
298-8346 Wiring Gp-Monitor -Payload
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 11***44 | Sleeve-Plastic; (20-cm) | 0 |
276-6132 Wiring Gp-Monitor
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 25***48 | Cable As-Communication; (Camera) | 1 |
| 25***99 | Base | 2 |
341-5894 Wiring Gp-Platform -Powered Stairway
| 03***48 | Clip; (11.11mm .437in Id) | 15 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
284-5804 Wiring Gp-Platform -Rh
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
340-8700 Wiring Gp-Platform -Powered Stairway
| 03***05 | Terminal-Cable; (00-Ga, 5/16-In Screw) | 1 |
| 03***06 | Terminal-Ring; (00-Ga, 1/4-In Screw) | 1 |
| 03***48 | Clip; (11.11mm .437in Id) | 4 |
341-5892 Wiring Gp-Platform -Powered Stairway
| 03***05 | Terminal-Cable; (00-Ga, 5/16-In Screw) | 1 |
| 03***06 | Terminal-Ring; (00-Ga, 1/4-In Screw) | 1 |
| 03***48 | Clip; (11.11mm .437in Id) | 4 |
340-8704 Wiring Gp-Platform -Powered Stairway
| 03***48 | Clip; (11.11mm .437in Id) | 15 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
284-5875 Wiring Gp-Rear Axle Housing
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***13 | Receptacle As-Connector; (70-Pin) | 1 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
292-0516 Wiring Gp-Sensor -Brake Control
| 08***56 | 90 Degrees Elbow | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
284-5813 Wiring Gp-Sensor -Turbocharger Air Inlet Pressure
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 13***00 | Clip; (Tab) | 4 |
292-0515 Wiring Gp-Sensor -Hydraulic Tank
| 03***48 | Clip; (11.11mm .437in Id) | 6 |
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
298-8225 Wiring Gp-Service Center
| 01***42 | Screw-Machine; (6/32x1-In) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
247-1880 Wiring Gp-Unit Injector
| 03***34 | Seal-O-Ring | 1 |
| 10***97 | Mount-Wire Tie | 5 |
| 11***30 | Receptacle As-Connector; (4-Pin) | 1 |
Engine Arrangement
300-8722 Engine Ar -Low Altitude Application
| 28***14 | Lines Group-Air; -Aftercooler, Inlet | 1 |
| 28***16 | Lines Group-Air; -Aftercooler | 1 |
| 28***21 | Cooling Ar; -Low Altitude Application | 1 |
288-8962 Engine Ar
| 23***55 | Engine Ar-Core | 1 |
| 24***49 | Mounting Group-Turbocharger | 1 |
| 25***68 | Sensor Group-Temp & Press | 1 |
239-2355 Engine Ar-Core
| 23***55 | Engine Ar-Core | 1 |
| 24***15 | Seal Group-Crankshaft | 1 |
| 31***11 | Plate Group-Engine Identification | 1 |
284-5809 Installation Ar-Engine
| 28***09 | Installation Ar-Engine | 1 |
| 28***10 | Starting Aid Group-Ether | 1 |
| 28***12 | Support Group-Engine | 1 |
314-2452 Modification Ar-Engine
| 29***61 | Turbocharger Group | 1 |
| 31***52 | Modification Ar-Engine | 1 |
| 34***27 | Injector Group-Fuel | 16 |
Frame And Body
337-0097 Box Gp-Battery
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 16 |
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 27***39 | Block As-Junction | 2 |
360-5616 Bracket Gp-Storage
| 36***16 | Bracket Group-Storage | 1 |
| 36***45 | Bracket As | 4 |
360-5615 Bracket Gp-Storage
| 36***15 | Bracket Group-Storage | 1 |
| 36***17 | Bracket As | 4 |
291-2424 Cowling Gp
| 09***46 | Screw-Machine; (M8x1.25x16-mm) | 20 |
| 19***82 | Washer-Hard; (26x47x12-mm Thk) | 14 |
| 22***51 | Link As | 2 |
284-5899 Fender Gp
| 28***99 | Fender Group | 1 |
| 30***04 | Fender As; (Rh) | 1 |
| 30***06 | Fender As; (Lh) | 1 |
277-7952 Frame Gp
| 13***31 | Bearing-Sleeve | 2 |
| 19***72 | Washer-Hard; (33x60x14-mm Thk) | 8 |
| 27***51 | Frame As | 1 |
284-5838 Grill Gp-Radiator
| 28***38 | Grill Group-Radiator | 1 |
| 30***40 | Grill | 1 |
| 30***69 | Grill | 1 |
332-6218 Guard Gp-Drive Shaft
| 33***18 | Plate As | 1 |
| 33***20 | Plate | 1 |
| 33***23 | Plate As | 1 |
284-5882 Guard Gp-Hydraulic Tank
| 10***00 | Deflector | 2 |
| 11***32 | Cover | 2 |
| 27***22 | Cover | 1 |
332-6223 Guard Gp-Pump Drive Shaft
| 11***34 | Mount | 8 |
| 29***22 | Plate As | 1 |
| 31***33 | Plate As | 1 |
336-7071 Handrail Gp -Stairway Access
| 33***53 | Bushing | 4 |
| 33***71 | Handrail Group; -Stairway Access | 1 |
| 34***35 | Pipe As | 1 |
335-9569 Handrail Gp -Rh
| 09***46 | Screw-Machine; (M8x1.25x16-mm) | 20 |
| 0T***83 | Washer--Junction Box To Rear Support | 1 |
| 11***80 | Plate | 3 |
347-2412 Handrail Gp -Powered Stairway
| 33***53 | Bushing | 4 |
| 34***12 | Handrail Group; -Powered Stairway | 1 |
| 34***13 | Pipe As | 1 |
354-0505 Handrail Gp
| 33***68 | Block | 1 |
| 34***07 | Pipe As | 1 |
| 35***01 | Bushing | 1 |
348-5595 Handrail Gp -Powered Stairway
| 33***53 | Bushing | 4 |
| 34***87 | Pipe As | 1 |
| 34***88 | Pipe As | 1 |
337-1028 Handrail Gp
| 0T***83 | Washer--Junction Box To Rear Support | 1 |
| 11***80 | Plate | 2 |
| 14***87 | Bolt-Shoulder; (M10x1.5x42-mm) | 2 |
360-5260 Handrail Gp
| 16***00 | Connector | 4 |
| 16***01 | Snap | 2 |
| 31***04 | Plate | 4 |
335-9570 Handrail Gp -Lh
| 09***46 | Screw-Machine; (M8x1.25x16-mm) | 20 |
| 0T***83 | Washer--Junction Box To Rear Support | 2 |
| 11***80 | Plate | 4 |
336-7070 Handrail Gp -Stairway Access
| 33***53 | Bushing | 4 |
| 33***65 | Tube As | 1 |
| 33***70 | Handrail Group; -Stairway Access | 1 |
354-0504 Handrail Gp
| 33***68 | Block | 1 |
| 34***17 | Pipe As | 1 |
| 35***01 | Bushing | 1 |
330-0466 Hood Gp-Truck -Engine Hood, Rh
| 33***66 | Hood Group-Truck; -Engine Hood, Rh | 1 |
| 33***46 | Frame As-Hood | 1 |
| 33***47 | Frame As | 1 |
330-0461 Hood Gp-Truck
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
| 12***05 | Bolt; (M4x0.7x12-mm) | 8 |
| 17***88 | Latch As | 4 |
314-5262 Ladder Gp
| 24***89 | Mount As | 4 |
| 31***43 | Ladder As | 1 |
| 31***62 | Ladder Group | 1 |
289-1018 Ladder Gp
| 28***18 | Ladder Group | 1 |
| 31***74 | Step As | 3 |
| 31***75 | Plate | 2 |
298-8220 Lubrication Gp-Automatic -Electric
| 20***99 | Hose As | 1 |
| 29***20 | Lubrication Group-Automatic; -Electric | 1 |
| 35***18 | Pump Group-Lubrication | 1 |
284-5820 Lubrication Gp-Automatic
| 00***39 | Adapter-Pipe | 8 |
| 08***45 | Tee | 1 |
| 11***19 | Hose As | 1 |
336-7679 Mirror Ar-Rear View -Stairway
| 33***79 | Mirror Rear Axle View; -Stairway | 1 |
| 33***72 | Mirror Group-Rear View; -Heated | 1 |
| 33***73 | Wiring Group-Mirror; -Heated | 1 |
313-1092 Mirror Ar-Rear View -Heated
| 29***61 | Mirror Group-Rear View; -Heated | 1 |
| 29***18 | Wiring Group-Mirror; -Heated | 1 |
| 31***92 | Mirror Rear Axle View; -Heated | 1 |
311-7058 Mirror Gp -Lh
| 16***69 | Glass-Mirror | 1 |
| 1B***93 | Bolt; (1/4-20x0.62-In) | 2 |
| 25***37 | Clip | 1 |
311-7059 Mirror Gp -Heated
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 1B***93 | Bolt; (1/4-20x0.62-In) | 2 |
| 25***37 | Clip | 1 |
291-6861 Mirror Gp-Rear View -Heated
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***87 | Bracket As | 2 |
| 13***89 | Block | 4 |
291-6862 Mirror Gp-Rear View
| 13***87 | Bracket As | 2 |
| 13***89 | Block | 4 |
| 15***10 | Mirror As; (Rh) | 1 |
337-9172 Mirror Gp-Rear View -Heated
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 13***87 | Bracket As | 2 |
294-8568 Mounting Ar-Truck Body
| 29***66 | Mounting Group-Truck Body | 1 |
| 29***68 | Mounting Ar-Truck Body | 1 |
| 30***74 | Mounting Group-Mirror | 1 |
291-6864 Mounting Gp-Electric Retarder
| 29***64 | Mounting Group-Electric Retarder | 1 |
| 8T***93 | Bolt-Plt; (M16 X 2.0 X 50) | 11 |
| 9X***57 | Washer-Pipe As To Main Pump Suction Port | 11 |
284-5908 Mounting Gp-Suspension -Front
| 14***99 | Washer-Hard; (39x66x6-mm Thk) | 24 |
| 15***44 | Key | 2 |
| 21***02 | Washer; (33x56x20-mm Thk) | 16 |
291-6866 Mounting Gp-Truck Body
| 14***99 | Washer-Hard; (39x66x6-mm Thk) | 2 |
| 15***08 | Plate | 10 |
| 18***15 | Pin | 2 |
330-0467 Panel Gp-Hood -Engine Hood, Lh
| 33***67 | Panel Group-Hood; -Engine Hood, Lh | 1 |
| 33***65 | Tube | 1 |
| 33***66 | Frame As-Hood | 1 |
351-2419 Pump Gp-Lubrication
| 00***41 | Elbow-Pipe | 2 |
| 00***10 | Tee; (Pipe) | 1 |
| 03***46 | Elbow | 1 |
351-2418 Pump Gp-Lubrication
| 00***41 | Elbow-Pipe | 2 |
| 12***05 | Elbow | 1 |
| 18***93 | Adapter-Union | 1 |
351-2414 Pump Gp-Lubrication
| 00***41 | Elbow-Pipe | 2 |
| 00***10 | Tee; (Pipe) | 1 |
| 03***46 | Elbow | 1 |
348-5590 Spacer Gp-Stairway
| 34***90 | Spacer Group-Stairway | 1 |
| 34***91 | Plate As | 1 |
| 34***94 | Plate-Tread | 1 |
335-1688 Stairway Ar -Lh
| 28***18 | Ladder Group | 1 |
| 33***88 | Stairway Ar; -Lh | 1 |
| 33***68 | Stairway Group; -Lh | 1 |
335-1687 Stairway Ar -Rh
| 28***18 | Ladder Group | 1 |
| 33***87 | Stairway Ar; -Rh | 1 |
| 33***67 | Stairway Group; -Rh | 1 |
328-1196 Stairway Gp -Powered
| 14***85 | Clip | 1 |
| 16***79 | Strip | 1 |
| 19***99 | Nut; (M8x1.25-Thd) | 8 |
336-7050 Stairway Gp -Powered
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 19***99 | Nut; (M8x1.25-Thd) | 4 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 16 |
335-9567 Stairway Gp -Rh
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 12 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 20 |
| 30***69 | Plate, Name-Plate (Accent Stripe) | 1 |
335-9568 Stairway Gp -Lh
| 0T***83 | Washer--Junction Box To Rear Support | 1 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 12 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 20 |
313-5391 Step Gp
| 31***76 | Step As | 1 |
| 31***91 | Step Group | 1 |
| 33***86 | Tube | 2 |
330-0793 Support As -Hood
| 18***83 | Nut-Hex Flange; (M12x1.75-Thd) | 1 |
| 18***15 | Nut-Hex Flange; (M10x1.5-Thd) | 1 |
| 1B***76 | Pin,Straight,Headed Governor And Decelerator Control | 1 |
330-0796 Support As -Hood
| 18***83 | Nut-Hex Flange; (M12x1.75-Thd) | 1 |
| 18***15 | Nut-Hex Flange; (M10x1.5-Thd) | 1 |
| 1B***76 | Pin,Straight,Headed Governor And Decelerator Control | 1 |
304-8470 Support Gp-Radiator
| 08***50 | Pad-Mounting | 1 |
| 09***76 | Boss | 2 |
| 10***44 | Boss; (M10x1.5x60-mm) | 2 |
339-5998 Suspension Ar -U.S.
| 28***18 | Suspension Rear Axle | 1 |
| 28***29 | Suspension Group-Front | 2 |
| 29***70 | Reservoir | 1 |
361-4689 Suspension Ar -Canada
| 28***29 | Suspension Group-Front | 2 |
| 29***70 | Reservoir | 1 |
| 34***71 | Accumulator Group-Steering; -Charged | 3 |
339-5995 Suspension Ar -U.S.
| 28***18 | Suspension Rear Axle | 1 |
| 28***29 | Suspension Group-Front | 2 |
| 30***05 | Accumulator Group-Brake; -Charged | 2 |
339-5999 Suspension Ar -European Market
| 28***29 | Suspension Group-Front | 2 |
| 31***61 | Reservoir | 1 |
| 33***99 | Suspension Ar; -European Market | 1 |
361-4690 Suspension Ar -Canada
| 28***29 | Suspension Group-Front | 2 |
| 34***71 | Accumulator Group-Steering; -Charged | 3 |
| 34***72 | Accumulator Group-Brake; -Charged | 2 |
339-5997 Suspension Ar -European Market
| 28***29 | Suspension Group-Front | 2 |
| 33***97 | Suspension Ar; -European Market | 1 |
| 34***71 | Accumulator Group-Steering; -Charged | 3 |
289-8618 Suspension Ar-Rear
| 03***67 | Ring; (Back Up) | 2 |
| 03***39 | Seal-O-Ring (Id=9.25mm) | 2 |
| 10***58 | Plate; (Lh) | 1 |
354-4260 Suspension Ar-Rear
| 03***67 | Ring; (Back Up) | 2 |
| 03***39 | Seal-O-Ring (Id=9.25mm) | 2 |
| 10***58 | Plate; (Lh) | 1 |
289-8629 Suspension Gp-Front
| 14***85 | Head | 1 |
| 14***89 | Piston | 1 |
| 14***90 | Gland | 1 |
289-8619 Suspension Gp-Rear -Rh
| 15***11 | Ring-Wear | 1 |
| 15***15 | Seal-Lip Type | 1 |
| 18***58 | Cover | 2 |
292-0265 Suspension Gp-Rear
| 08***33 | Cap | 8 |
| 15***21 | Cover-Suspension | 2 |
| 15***22 | Clamp-Hose | 4 |
352-0599 Suspension Gp-Rear -Lh
| 15***11 | Ring-Wear | 1 |
| 15***15 | Seal-Lip Type | 1 |
| 18***58 | Cover | 2 |
289-8620 Suspension Gp-Rear -Lh
| 15***11 | Ring-Wear | 1 |
| 15***15 | Seal-Lip Type | 1 |
| 18***58 | Cover | 2 |
352-0600 Suspension Gp-Rear -Rh
| 15***11 | Ring-Wear | 1 |
| 15***15 | Seal-Lip Type | 1 |
| 18***58 | Cover | 2 |
303-6666 Valve Gp-Lube Distribution
| 26***52 | Valve As-Lube Distribution; (4-Injector) | 3 |
| 26***53 | Valve As-Lube Distribution; (5-Injector) | 2 |
| 30***66 | O-Ring, O Ring Seal, Valve Group-Lube Distribution, Seal/O-Ring | 1 |
5t-5010 Valve Gp-Lube Distribution -5 Injector
| 19***54 | Packing | 5 |
| 5T***10 | Valve Group-Lube Distribution; -5-Injector | 1 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 5 |
8w-2597 Valve Gp-Lube Distribution -4-Injector
| 19***54 | Packing | 4 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 4 |
| 8W***55 | Kit-Injector; (Lube Valve) | 1 |
303-6665 Valve Gp-Lube Distribution
| 30***65 | Threaded Plug; 7/16 - 20 Unf, Threaded Plug, Valve Group-Lube Distribution | 1 |
| 5T***10 | Valve Group-Lube Distribution; -5-Injector | 2 |
| 5T***12 | Cap-Protection | 22 |
314-5260 Walkway Gp
| 31***42 | Walkway As | 1 |
| 31***45 | Plate As | 1 |
| 31***40 | Plate As | 1 |
284-5881 Walkway Gp
| 13***49 | Pin | 3 |
| 19***66 | Washer-Hard; (11x25x10-mm Thk) | 32 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 36 |
336-7769 Walkway Gp -Lh
| 19***99 | Nut; (M8x1.25-Thd) | 4 |
| 1B***09 | Bolt-Carriage | 4 |
| 1D***92 | Bolt-Carriage | 10 |
291-6845 Walkway Gp
| 12***98 | Plate; (Rh) | 1 |
| 12***99 | Plate; (Lh) | 1 |
| 15***74 | Bolt-Round Head; (M12x1.75x60-mm) | 16 |
Fuel System
316-1741 Filter Gp-Fuel
| 11***24 | Spacer; (11.13x19.05x47-mm Thk) | 2 |
| 19***66 | Washer-Hard; (11x25x10-mm Thk) | 2 |
| 1R***55 | Filter As-Fuel; (Advanced Efficiency) | 3 |
322-1221 Filter Gp-Water Sep & Fuel
| 31***54 | Filter As-Water Sep & Fuel | 1 |
| 32***26 | Base As-Filter | 1 |
| 32***21 | Filter Group-Water Sep & Fuel | 1 |
344-2927 Injector Gp-Fuel
| 1K***49 | Spacer Alternator To Brackets | 1 |
| 33***94 | Injector Group-Fuel | 1 |
| 34***27 | Injector Group-Fuel | 1 |
331-5894 Injector Gp-Fuel
| 24***41 | Seal-O-Ring | 1 |
| 24***42 | Seal-O-Ring | 1 |
| 33***94 | Injector Group-Fuel | 1 |
339-9354 Kit-Cap -Contamination Control
| 33***54 | Kit-Cap; -Contamination Control | 1 |
| 9U***71 | Cap/Plug-Tapered | 20 |
| 9U***72 | Cap/Plug-Tapered | 20 |
339-9352 Kit-Cap -Contamination Control
| 33***52 | Kit-Cap; -Contamination Control | 1 |
| 9U***71 | Cap/Plug-Tapered | 60 |
| 9U***72 | Cap/Plug-Tapered | 80 |
339-9353 Kit-Cap -Contamination Control
| 27***31 | Cap-Plug | 1 |
| 27***46 | Cap-Plug | 1 |
| 27***53 | Cap-Plug | 1 |
284-5818 Lines Gp-Fuel
| 05***58 | "P" Clip | 1 |
| 05***33 | Spacer | 3 |
| 06***45 | Clip | 1 |
327-6041 Lines Gp-Fuel
| 21***65 | Elbow | 3 |
| 22***15 | Connector | 1 |
| 22***90 | Seal-O-Ring | 3 |
327-6375 Lines Gp-Fuel Drain
| 1S***94 | Clip-R.H. Side Engine Support | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 22***90 | Seal-O-Ring | 5 |
311-9170 Lines Gp-Fuel Filter
| 13***00 | Clip; (Tab) | 1 |
| 15***24 | Valve-Ball; (Shut-Off) | 1 |
| 17***45 | Sensor Group-Liquid Level; -Water Separator-Water In Fuel | 1 |
327-0844 Lines Gp-Fuel Injection -Rear
| 13***00 | Spacer; (11x25x50-mm Thk) | 2 |
| 21***60 | Bolt; (M10x1.5x130-mm) | 2 |
| 22***90 | Seal-O-Ring | 2 |
331-3675 Lines Gp-Fuel Injection
| 12***24 | Seal-O-Ring | 1 |
| 22***46 | Connector | 1 |
| 22***89 | Seal-O-Ring | 1 |
304-9602 Lines Gp-Fuel Injection -Supply, Rh
| 22***90 | Seal-O-Ring | 1 |
| 24***04 | Clamp | 4 |
| 28***25 | Ring | 2 |
333-9174 Lines Gp-Fuel Injection -Priming
| 17***10 | Washer-Hard; (17.5x32x7-mm Thk) | 1 |
| 22***90 | Seal-O-Ring | 1 |
| 24***27 | Hose As | 2 |
326-1426 Manifold Gp-Fuel
| 22***56 | Elbow | 1 |
| 22***91 | Seal-O-Ring | 2 |
| 22***92 | Seal-O-Ring | 2 |
333-9205 Manifold Gp-Fuel
| 22***90 | Seal-O-Ring | 1 |
| 22***05 | Seal-O-Ring | 1 |
| 28***58 | Connector | 1 |
262-5082 Mounting Gp-Fuel Line
| 26***82 | Mounting Group-Fuel Line | 1 |
| 26***83 | Block | 2 |
| 6V***03 | Bolt; (M16x2x60-mm) | 2 |
291-6858 Mounting Gp-Fuel Tank
| 11***89 | Washer | 3 |
| 20***03 | Adapter-Fast Fill Fuel | 1 |
| 27***95 | Kit-Vent; (Fuel)(Plastic) | 1 |
328-7085 Mounting Gp-Pump
| 14***39 | Seal-O-Ring | 1 |
| 20***55 | Seal-O-Ring | 1 |
| 32***85 | Mounting Group-Pump | 1 |
328-0669 Plug Gp-Fuel Lines -High Pressure Fuel Lines
| 13***43 | Connector | 1 |
| 22***89 | Seal-O-Ring | 1 |
| 22***93 | Seal-O-Ring | 1 |
359-2806 Pump Gp-Fuel Injection
| 20***55 | Seal-O-Ring | 1 |
| 24***57 | Plug | 2 |
| 35***56 | Valve As-Fuel | 1 |
313-7608 Pump Gp-Fuel Priming -Electric
| 31***08 | Pump Group-Fuel Priming; -Electric | 1 |
| 31***62 | Harness As-Pump | 1 |
341-6231 Pump Gp-Fuel Priming -Electric
| 1P***15 | Grommet Assem. | 4 |
| 22***62 | Connector | 2 |
| 22***91 | Seal-O-Ring | 2 |
313-6693 Pump Gp-Fuel Transfer
| 20***81 | Bolt-Flange Head; (M8x1.25x20-mm) | 4 |
| 28***47 | Coupling | 1 |
| 30***04 | Pump As-Fuel Transfer | 1 |
328-2001 Rail Gp-Fuel
| 25***36 | Rail Group-Fuel; -Lh | 1 |
| 32***34 | Rail Group-Fuel; -Rh | 1 |
| 32***01 | Rail Group-Fuel | 1 |
327-7734 Rail Gp-Fuel -Rh
| 22***53 | Plug | 8 |
| 22***08 | Seal-O-Ring | 1 |
| 32***18 | Kit-Limiter; (Flow Control), Check Valve Seat | 8 |
258-9936 Rail Gp-Fuel -Lh
| 22***53 | Plug | 8 |
| 22***08 | Seal-O-Ring | 1 |
| 25***36 | Rail Group-Fuel; -Lh | 1 |
291-9282 Tank & Mtg Ar-Fuel
| 29***55 | Tank Group-Fuel | 1 |
| 29***58 | Mounting Group-Fuel Tank | 1 |
| 29***82 | Tank & Mtg Ar-Fuel | 1 |
359-1925 Tank Ar-Fuel
| 29***58 | Mounting Group-Fuel Tank | 1 |
| 35***25 | Tank Ar-Fuel | 1 |
| 35***15 | Tank Group-Fuel | 1 |
291-9283 Tank Ar-Fuel
| 29***56 | Tank Group-Fuel | 1 |
| 29***58 | Mounting Group-Fuel Tank | 1 |
| 29***83 | Tank Ar-Fuel | 1 |
359-1930 Tank Ar-Fuel
| 29***58 | Mounting Group-Fuel Tank | 1 |
| 35***30 | Tank Ar-Fuel | 1 |
| 35***10 | Tank Group-Fuel | 1 |
291-6855 Tank Gp-Fuel
| 11***41 | Guard | 1 |
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 16***17 | Cover | 1 |
291-6856 Tank Gp-Fuel
| 11***41 | Guard | 1 |
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 16***17 | Cover | 1 |
359-3110 Tank Gp-Fuel
| 11***41 | Guard | 1 |
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 16***17 | Cover | 1 |
359-3115 Tank Gp-Fuel
| 11***41 | Guard | 1 |
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 16***17 | Cover | 1 |
293-5016 Valve Gp-Check
| 29***16 | Valve Group-Check | 1 |
| 7Y***80 | Seal-O-Ring (Id=3.80mm) | 1 |
| 8T***76 | Seal-O-Ring | 1 |
326-1443 Valve Gp-Check
| 32***43 | Valve Group-Check | 1 |
Hydraulic System
217-6720 Actuator Gp-Pilot Control -Proportional Solenoid
| 03***05 | Seal-O-Ring | 1 |
| 11***83 | Housing | 1 |
| 11***85 | Retainer | 1 |
158-9103 Actuator Gp-Pump
| 15***03 | Actuator Group-Pump; -Maximum Angle | 1 |
| 16***95 | Piston | 1 |
| 16***96 | Rod; (159.2-mm, Oal) | 1 |
158-9104 Actuator Gp-Pump
| 15***04 | Actuator Group-Pump; -Minimum Angle | 1 |
| 16***01 | Piston | 1 |
| 16***02 | Rod; (152.2-mm, Oal) | 1 |
295-5712 Cylinder Gp-Hoist -Telescoping
| 12***72 | Seal-Wiper | 1 |
| 12***03 | Ring | 1 |
| 15***89 | Bearing | 1 |
149-3060 Drive Gp-Pump
| 14***97 | Gear; (39-Teeth)(Top) | 1 |
| 14***98 | Gear-Idler; (42-Teeth) | 1 |
| 14***99 | Gear; (39-Teeth)(Bottom) | 1 |
284-5847 Fastener Gp-Pump Drive
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 4 |
| 28***47 | Fastener Group-Pump Drive | 1 |
| 30***80 | Plate As | 1 |
339-9706 Filter Gp-Oil
| 33***73 | Cover | 1 |
| 33***06 | Filter Group-Oil; -Fan, Steering Return | 1 |
| 34***06 | Filter Element As-Oil; (Steering Filter) | 1 |
290-2569 Filter Gp-Oil
| 29***69 | Filter Group-Oil; -Fan, Steering Case Drain | 1 |
| 29***46 | Filter Element As-Oil; (Hydraulic Case Drain)(Fan, Steering Case Drain) | 1 |
| 34***16 | Housing-Filter | 1 |
313-7047 Head Gp-Pump
| 08***72 | Plug-O-Ring | 2 |
| 12***94 | Plug; (Break Off) | 4 |
| 12***17 | Plug | 1 |
284-5842 Hydraulic Ar
| 28***42 | Hydraulic Ar | 1 |
| 28***46 | Mounting Group-Hydraulic Tank | 1 |
| 28***47 | Fastener Group-Pump Drive | 1 |
284-5849 Lines Gp-Hoist
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 12***74 | Seal-O-Ring; (7.59mm'Id) | 2 |
| 12***47 | Elbow | 1 |
346-5251 Lines Gp-Hydraulic
| 12***77 | Plate | 1 |
| 16***57 | Spacer; (12x20x10-mm Thk) | 1 |
| 1V***74 | Tag-Identification; (Letter R) | 1 |
341-3625 Lines Gp-Hydraulic
| 11***34 | Connector | 1 |
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
348-5615 Lines Gp-Hydraulic
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***77 | Elbow As. | 1 |
284-5851 Lines Gp-Hydraulic
| 03***36 | Seal-O-Ring | 1 |
| 13***89 | Bolt; (M12x1.75x75-mm) | 4 |
| 14***91 | Hose As | 1 |
284-5855 Lines Gp-Hydraulic Fan
| 12***59 | Seal-O-Ring | 2 |
| 14***08 | Plug As. | 1 |
| 16***12 | Clip; (Slot) | 1 |
328-2229 Lines Gp-Pump Drive
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 1 |
305-4103 Manifold Gp-Hydraulic
| 14***95 | Plug As | 1 |
| 15***36 | Cartridge | 1 |
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
240-7790 Motor Gp-Piston
| 10***31 | Head | 1 |
| 13***53 | Plug | 2 |
| 24***90 | Motor Group-Piston | 1 |
149-3117 Mounting Gp-Cylinder
| 14***17 | Mounting Group-Cylinder; -Hoist | 1 |
| 15***88 | Spacer; (163x190x6-mm Thk) | 4 |
| 15***18 | Cover | 2 |
284-5846 Mounting Gp-Hydraulic Tank
| 28***46 | Mounting Group-Hydraulic Tank | 1 |
| 7X***66 | Bolt; (M20x2.5x110-mm) | 2 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 4 |
303-4443 Pump & Mtg Gp-Hydraulic -Fan
| 11***19 | Stud-Taperlock; (M20x2.5x75-mm) | 4 |
| 30***43 | Pump & Mtg Group-Hydraulic; -Fan | 1 |
| 30***26 | Pump Group-Piston | 1 |
303-4445 Pump & Mtg Gp-Hydraulic -Brake
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 2 |
| 30***45 | Pump & Mtg Group-Hydraulic; -Brake | 1 |
| 31***04 | Pump Group-Gear; -Brake | 1 |
291-6892 Pump & Mtg Gp-Hydraulic -Hoist
| 11***19 | Stud-Taperlock; (M20x2.5x75-mm) | 4 |
| 29***92 | Pump & Mtg Group-Hydraulic; -Hoist | 1 |
| 29***78 | Pump Group-Gear; -Hoist | 1 |
291-6891 Pump & Mtg Gp-Hydraulic
| 14***60 | Drive Group-Pump; -Main | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 2 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
291-6895 Pump & Mtg Gp-Hydraulic -Brake Cooling
| 17***32 | Bolt; (M20x2.5x45-mm) | 4 |
| 29***95 | Pump & Mtg Group-Hydraulic; -Brake Cooling | 1 |
| 30***23 | Pump Group-Gear; -Brake Cooling | 1 |
295-0778 Pump Gp-Gear -Hoist
| 16***95 | Nut; (3/4-16-Thd) | 8 |
| 16***77 | Dowel | 10 |
| 16***22 | Coupling | 1 |
303-9323 Pump Gp-Gear -Brake Cooling
| 15***67 | Seal-Lip Type | 2 |
| 24***86 | Dowel | 10 |
| 26***44 | Plate-Pressure | 3 |
315-7804 Pump Gp-Gear -Brake
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 31***04 | Pump Group-Gear; -Brake | 1 |
| 31***21 | Gear-Idler; (13-Teeth) | 1 |
303-9326 Pump Gp-Piston
| 10***97 | Bolt-Socket Head; (M12x1.75x50-mm) | 4 |
| 11***16 | Pin | 4 |
| 11***18 | Bolt-Socket Head; (M18x2.5-Thd) | 4 |
257-2167 Rotating Gp-Motor
| 09***24 | Ring | 1 |
| 09***50 | Ring-Retaining | 1 |
| 10***65 | Bolt-Socket Head; (M8x1.25x20-mm) | 14 |
313-7046 Rotating Gp-Pump
| 11***61 | Cradle | 1 |
| 11***64 | Liner | 1 |
| 11***65 | Cage | 1 |
284-5848 Shaft Gp-Pump Drive
| 0S***04 | Bolt (1/2-20x2.5in); (1/2-20x2.5-In) | 16 |
| 28***48 | Shaft Group-Pump Drive | 1 |
| 29***68 | Universal Joint Group | 1 |
296-8079 Tank Gp-Hydraulic -Brake, Hoist, Steering
| 10***82 | Gasket | 1 |
| 10***03 | Gauge-Sight; (Hydraulic Oil Level) | 4 |
| 12***87 | Drain As; (Parts Serve) | 2 |
305-2603 Valve Gp-Control -Hoist
| 03***06 | Seal (Use As Required) | 1 |
| 10***83 | Adapter | 1 |
| 11***63 | Piston | 1 |
183-7170 Valve Gp-Makeup
| 14***08 | Plug As. | 1 |
| 18***70 | Valve Group-Makeup; -Hydraulic Fan Motor | 1 |
| 1U***22 | Bearing-Sleeve; (12.65mm Id) | 1 |
216-0935 Valve Gp-Pump Control -Flow Compensator
| 14***00 | Retainer | 1 |
| 17***20 | Bushing | 1 |
| 17***22 | Spring | 1 |
146-3489 Valve Gp-Pump Control
| 11***99 | Plug | 1 |
| 11***24 | Setscrew | 1 |
| 14***89 | Valve Group-Pump Control; -Hydraulic Fan Piston Pump | 1 |
216-0934 Valve Gp-Pump Control -Pressure, Flow Compensator
| 12***94 | Plug; (Break Off) | 5 |
| 14***89 | Valve Group-Pump Control; -Hydraulic Fan Piston Pump | 1 |
| 14***92 | Lever | 1 |
329-6981 Valve Gp-Relief
| 10***45 | Plug-Orifice | 1 |
| 12***48 | Spring | 1 |
| 12***77 | Spring | 1 |
6e-5855 Valve Gp-Relief
| 6E***55 | Valve Group-Relief; -Tc, Hoist, Rear Brake Cooler | 1 |
| 6J***80 | Spring | 1 |
| 6K***07 | Seal-O-Ring; (43.69mm Id) | 1 |
138-6779 Valve Gp-Shuttle
| 10***14 | Bushing | 1 |
| 13***79 | Valve Group-Shuttle; -Resolver-Implement Pump-Swing Pump | 1 |
| 13***80 | Valve-Shuttle | 1 |
Lubrication System
281-6508 Breather Gp
| 1T***68 | Seal-O-Ring; (Fuel Injection Pump) | 2 |
| 22***71 | Bolt-12 Point Head; (M16x2x45-mm) | 8 |
| 25***16 | Elbow | 2 |
284-5815 Extension Gp-Drain -Engine Oil
| 28***15 | Extension Group-Drain; -Engine Oil | 1 |
| 3B***55 | Elbow | 1 |
| 3B***80 | Nipple--Priming Pump Bottom | 1 |
317-7610 Filler Gp-Engine Oil
| 10***92 | Washer; (4.8x25x2-mm Thk) | 2 |
| 13***46 | Cap As-Engine Oil Filler | 1 |
| 19***66 | Washer-Hard; (11x25x10-mm Thk) | 9 |
339-3301 Filter Gp-Engine Oil
| 19***66 | Washer-Hard; (11x25x10-mm Thk) | 8 |
| 22***00 | Seal-O-Ring | 1 |
| 22***01 | Seal-O-Ring | 1 |
288-8945 Filter Gp-Engine Oil
| 11***75 | Washer; (13.5x32x8-mm Thk) | 3 |
| 19***66 | Washer-Hard; (11x25x10-mm Thk) | 10 |
| 28***43 | Bracket | 1 |
301-6778 Gauge Gp-Sight -Engine Oil Level
| 30***19 | Cover | 1 |
| 30***78 | Gauge Group-Sight; -Engine Oil Level | 1 |
| 33***67 | Pin; (Vent) | 1 |
291-3719 Installation Gp-Oil Renewal
| 22***64 | Configuration-Premium; (Oil Renewal System) | 1 |
| 29***19 | Installation Group-Oil Renewal | 1 |
| 30***37 | Exhaust Manifold, Valve & Mtg Group-Oil Metering | 1 |
304-9115 Installation Gp-Oil Renewal -With Service Center
| 22***64 | Configuration-Premium; (Oil Renewal System) | 1 |
| 30***32 | Tank & Mtg Group-Engine Oil; -With Service Center | 1 |
| 30***37 | Exhaust Manifold, Valve & Mtg Group-Oil Metering | 1 |
304-9116 Installation Gp-Oil Renewal -Without Service Center
| 22***64 | Configuration-Premium; (Oil Renewal System) | 1 |
| 30***37 | Exhaust Manifold, Valve & Mtg Group-Oil Metering | 1 |
| 30***16 | Installation Group-Oil Renewal; -Without Service Center | 1 |
294-5598 Lines Gp-Engine Oil
| 06***02 | Seal-O-Ring | 1 |
| 12***54 | Flange | 2 |
| 13***18 | Seal-O-Ring; (Camshaft) | 2 |
284-5834 Lines Gp-Fan Drive
| 14***17 | Spacer | 1 |
| 15***49 | Elbow As | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
305-3419 Lines Gp-Oil Supply -Fuel Pump
| 25***60 | Elbow | 2 |
| 30***19 | Lines Group-Oil Supply; -Fuel Pump | 1 |
| 31***95 | Hose As | 1 |
297-5931 Lines Gp-Prelubrication
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***52 | Elbow As. | 2 |
| 15***51 | Connector Assem. | 1 |
318-0685 Lines Gp-Turbocharger Oil
| 22***61 | Elbow | 2 |
| 22***90 | Seal-O-Ring | 6 |
| 24***13 | Cover | 2 |
306-9418 Metering Gp-Engine Oil
| 13***43 | Connector | 1 |
| 14***48 | Spacer; (11x25x65-mm Thk) | 2 |
| 14***51 | Elbow Group | 1 |
306-8902 Metering Gp-Engine Oil
| 13***43 | Connector | 1 |
| 14***48 | Spacer; (11x25x65-mm Thk) | 1 |
| 14***51 | Elbow Group | 1 |
299-1897 Prelubrication Ar-Engine
| 29***20 | Wiring Group-Lubrication | 1 |
| 29***31 | Lines Group-Prelubrication | 1 |
| 29***97 | Prelubrication Ar-Engine | 1 |
347-8880 Pump Gp-Engine Oil
| 13***89 | Bolt; (M12x1.75x75-mm) | 3 |
| 34***03 | Pump Group-Engine Oil | 1 |
| 34***80 | Pump Group-Engine Oil | 1 |
341-2503 Pump Gp-Engine Oil
| 25***42 | Cover As-Oil Pump | 1 |
| 25***54 | Bearing-Sleeve | 1 |
| 26***62 | Bearing-Sleeve | 1 |
262-1275 Pump Gp-Scavenge
| 16***94 | Bolt; (M12x1.75x65-mm) | 2 |
| 26***56 | Cover-Scavenge | 1 |
| 26***57 | Screen-Scavenge | 1 |
291-5330 Pump Gp-Scavenge
| 26***37 | Gear-Drive; (86-Teeth) | 1 |
| 26***44 | Cover As | 1 |
| 29***30 | Pump Group-Scavenge | 1 |
329-8645 Regulator Gp-Oil Pressure
| 11***86 | Seal-O-Ring | 1 |
| 11***58 | Stud | 1 |
| 19***66 | Washer-Hard; (11x25x10-mm Thk) | 3 |
308-7651 Tank & Mtg Gp-Engine Oil -Without Service Center
| 09***35 | Spacer; (11x22x5-mm Thk) | 4 |
| 13***21 | Washer; (13.5x25.5x3-mm Thk) | 1 |
| 14***38 | Elbow | 1 |
300-2332 Tank & Mtg Gp-Engine Oil -With Service Center
| 13***21 | Washer; (13.5x25.5x3-mm Thk) | 1 |
| 14***38 | Elbow | 1 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
302-8237 Valve & Mtg Gp-Oil Metering
| 10***25 | Clip | 1 |
| 13***54 | Spacer; (10.5x19x26.5-mm Thk) | 2 |
| 23***66 | Valve Group-Metering; -Oil Renewal System | 1 |
235-0266 Valve Gp-Metering -Oil Renewal System
| 08***22 | Adaptor O.R.F.S. | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
354-4924 Valve Gp-Pressure Control -Pressure Control
| 03***28 | Seal-O-Ring | 1 |
| 17***30 | Shim; (1-mm Thk) | 8 |
| 21***97 | Plug | 1 |
Machine Arrangement
284-9999 Chassis Ar
| 27***52 | Frame Group | 1 |
| 28***09 | Installation Ar-Engine | 1 |
| 28***17 | Lines Group-Air Conditioner | 1 |
284-5900 Common Ar
| 27***01 | Cab Ar; -Rops | 1 |
| 28***02 | Platform Ar; -Rh | 1 |
| 28***69 | Plate & Film Group | 1 |
284-5879 Installation Ar-Truck
| 14***17 | Mounting Group-Cylinder; -Hoist | 1 |
| 27***80 | Mounting Group-Cab | 1 |
| 28***07 | Cable Group-Electric Retarder | 1 |
Operator Station
237-3970 Air Compressor Gp-Seat
| 23***70 | Air Compressor Group-Seat | 1 |
283-0589 Air Conditioner & Mounting Gp
| 28***89 | Air Conditioner & Mounting Group | 1 |
| 33***48 | Air Conditioner Group | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 6 |
276-6110 Air Conditioner Ar
| 26***81 | Switch As-Rocker; (Air Conditioner Control) | 1 |
| 26***43 | Panel As | 1 |
| 27***12 | Knob; (Temperature Control) | 1 |
330-7148 Air Conditioner Gp
| 10***93 | Valve As | 1 |
| 10***94 | Gasket | 1 |
| 10***95 | Valve As | 1 |
290-7858 Arm Gp-Window Wiper -Lh
| 13***88 | Clip | 3 |
| 13***96 | Nozzle As-Washer | 1 |
| 19***21 | Bolt-Socket Head; (M6x1x25-mm) | 2 |
290-7857 Arm Gp-Window Wiper -Rh
| 13***88 | Clip | 3 |
| 13***96 | Nozzle As-Washer | 1 |
| 19***21 | Bolt-Socket Head; (M6x1x25-mm) | 2 |
292-1302 Armrest Gp -Rh
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 1 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***48 | Bracket Assem.; (Rh) | 1 |
292-1301 Armrest Gp -Lh
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 1 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***49 | Bracket Assem.; (Lh) | 1 |
320-6234 Blower Gp-Cab
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***40 | Resistor | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
276-6101 Cab Ar -Rops
| 27***71 | Rops As | 1 |
| 27***01 | Cab Ar; -Rops | 1 |
| 27***10 | Air Conditioner Ar | 1 |
163-0872 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***72 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
339-7924 Compressor Gp-Refrigerant
| 13***51 | Spacer; (11x19x6-mm Thk) | 4 |
| 16***72 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
| 19***42 | Belt Tensioner; (Air Compressor) | 1 |
333-4675 Condenser & Mtg Gp-Refrigerant
| 24***89 | Mount As | 4 |
| 27***40 | Plate | 2 |
| 33***75 | Condenser & Mtg Group-Refrigerant | 1 |
276-6111 Control Gp-Acceleration
| 26***78 | Pedal Group-Governor | 1 |
| 26***83 | Sensor Group-Position; (Throttle) | 1 |
| 27***11 | Control Group-Acceleration | 1 |
276-6113 Control Gp-Foot Brake
| 27***13 | Control Group-Foot Brake | 1 |
| 30***91 | Cover | 1 |
| 30***87 | Pedal Group-Governor; -Secondary Brake | 1 |
314-4235 Control Gp-Foot Brake
| 26***66 | Sensor Group-Position; -Throttle | 1 |
| 30***58 | Kit-Repair; (Hydraulic Pedal Control) | 1 |
| 31***35 | Control Group-Foot Brake | 1 |
349-1427 Control Gp-Steering
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***89 | Adapter | 2 |
300-1159 Control Gp-Xmsn & Hoist
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***16 | Screw; (4-40x15.88-mm) | 4 |
| 10***23 | Gasket | 2 |
300-1173 Control Gp-Xmsn & Hoist
| 30***59 | Control Group-Xmsn & Hoist | 1 |
| 30***73 | Control Group-Xmsn & Hoist | 1 |
| 32***16 | Mounting Group-Control; -Hoist, Transmission | 1 |
296-9880 Cover Gp-Access -Front
| 14***55 | Seal; (478-cm) | 0 |
| 24***29 | Latch-Door | 2 |
| 29***11 | Washer | 4 |
347-0896 Cover Gp-Access
| 16***65 | Retainer | 12 |
| 31***82 | Filter Element-Enclosure Air; (Inverter Cabinet) | 1 |
| 34***96 | Cover Group-Access | 1 |
348-7853 Cover Gp-Access -Rh
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
| 30***14 | Plate As | 1 |
| 30***15 | Plate As | 1 |
347-0901 Cover Gp-Access
| 16***65 | Retainer | 12 |
| 31***82 | Filter Element-Enclosure Air; (Inverter Cabinet) | 1 |
| 34***01 | Cover Group-Access | 1 |
347-0893 Cover Gp-Access
| 16***65 | Retainer | 12 |
| 31***82 | Filter Element-Enclosure Air; (Inverter Cabinet) | 1 |
| 34***93 | Cover Group-Access | 1 |
347-0897 Cover Gp-Access
| 16***65 | Retainer | 12 |
| 31***82 | Filter Element-Enclosure Air; (Inverter Cabinet) | 1 |
| 34***97 | Cover Group-Access | 1 |
347-0895 Cover Gp-Access
| 16***65 | Retainer | 14 |
| 31***82 | Filter Element-Enclosure Air; (Inverter Cabinet) | 1 |
| 34***95 | Cover Group-Access | 1 |
226-8720 Cover Gp-Seat Belt
| 22***85 | Cover-Front | 1 |
| 22***86 | Cover As; (Rear) | 1 |
| 22***20 | Cover Group-Seat Belt | 1 |
317-7628 Door Gp-Cab -Lh
| 09***23 | Ring-Retaining; (External) | 3 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 13***67 | Screw-Truss Head | 9 |
318-2461 Door Gp-Cab -Rh
| 09***23 | Ring-Retaining; (External) | 3 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 11***28 | Handle As-Paddle | 1 |
318-9508 Door Gp-Cab -Lh
| 09***23 | Ring-Retaining; (External) | 3 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 20***48 | Insert-Threaded; (M6x1-Thd) | 4 |
318-2464 Door Gp-Cab -Rh
| 09***23 | Ring-Retaining; (External) | 3 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 11***28 | Handle As-Paddle | 1 |
295-8410 Filter Gp-Cab Air
| 10***66 | Filter Element-Cab Air; (Standard Efficiency) | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 2 |
| 13***92 | Retainer-Captive | 3 |
306-3341 Heater Gp-Cab
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 10 |
| 17***32 | Bolt-Hex Head; (M4x0.7x16mm) | 4 |
| 26***63 | Coil As-Heater | 1 |
5d-6998 Horn Gp-Air
| 15***87 | Cover | 2 |
| 2G***64 | Kit-Diaphragm; (Air Horn) | 2 |
| 4B***75 | Washer (1.75 In. Outside Diameter) | 1 |
298-8221 Horn Gp-Electric
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 14***04 | Horn As | 1 |
359-3144 Horn Gp-Electric -Rh
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
359-3143 Horn Gp-Electric -Lh
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
320-2753 Installation Gp-Radio
| 24***95 | Plate | 1 |
| 29***10 | Bracket As | 1 |
| 31***88 | Seal | 1 |
276-6122 Liner Gp-Cab -Sound Suppression
| 27***22 | Liner Group-Cab; -Sound Suppression | 1 |
| 31***92 | Panel | 1 |
| 31***94 | Panel | 1 |
284-5817 Lines Gp-Air Conditioner
| 06***45 | Clip | 10 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***93 | Valve As | 1 |
283-0591 Lines Gp-Air Conditioner
| 10***93 | Valve As | 1 |
| 10***94 | Gasket | 1 |
| 10***95 | Valve As | 1 |
284-5819 Lines Gp-Heater
| 09***47 | Spacer; (11x19x32-mm Thk)(11x19x32mm Thk) | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 1V***22 | Tag-Identification; (Letters Spl) | 2 |
284-5912 Monitor Ar-Payload
| 27***19 | Monitor Group-Payload | 1 |
| 28***12 | Monitor Ar-Payload | 1 |
| 29***46 | Wiring Group-Monitor; -Payload | 1 |
276-6119 Monitor Gp-Payload
| 22***50 | Monitor Group-Payload; (Display) | 1 |
| 27***19 | Monitor Group-Payload | 1 |
| 29***74 | Plate As | 1 |
331-7187 Monitor Gp-Road Condition
| 33***87 | Monitor Group-Road Condition | 1 |
| 33***38 | Configuration-Premium | 1 |
307-2581 Mounting Gp-Antenna -Product Link
| 28***37 | Plate | 1 |
| 28***33 | Antenna As | 1 |
| 30***89 | Antenna; (Flexible), Captive Washer Cap Screw; 1/2 - 13 X 4 3/4 In., Captive Washer Cap Screw, Screw, Captive Washe; 1/2-13 X 4 3/4" | 1 |
276-6080 Mounting Gp-Cab
| 23***78 | Washer-Hard; (26x50x8-mm Thk) | 8 |
| 27***80 | Mounting Group-Cab | 1 |
| 28***37 | Pin As | 2 |
304-1974 Mounting Gp-Mirror
| 15***51 | Pipe As | 1 |
| 25***05 | Bracket As | 1 |
| 30***74 | Mounting Group-Mirror | 1 |
314-5261 Mounting Gp-Platform
| 31***61 | Mounting Group-Platform | 1 |
| 33***46 | Plate As | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 8 |
294-0400 Mounting Gp-Rops
| 14***70 | Bolt; (M36x4x140-mm) | 40 |
| 19***73 | Washer-Hard; (39x70x16-mm Thk) | 40 |
| 29***69 | Plate | 1 |
292-6402 Pan Gp-Backrest -Lumbar
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***07 | Holder | 1 |
344-2229 Panel Gp-Cab
| 12***72 | Seal; (135-cm) | 0 |
| 34***70 | Plate As | 1 |
| 34***29 | Panel Group-Cab | 1 |
350-9271 Panel Gp-Cab
| 11***58 | Washer; (6.5x17x1-mm Thk) | 8 |
| 14***55 | Seal; (478-cm) | 0 |
| 29***36 | Panel As | 1 |
317-5232 Panel Gp-Cab
| 14***55 | Seal; (478-cm) | 0 |
| 31***31 | Panel As | 1 |
| 31***32 | Panel Group-Cab | 1 |
296-1511 Panel Gp-Instrument
| 28***41 | Application Group-Monitor; -Vims-Product Link | 1 |
| 29***11 | Panel Group-Instrument | 1 |
| 2W***99 | Bolt; (M6x1x40-mm) | 4 |
305-7987 Pedal Gp-Governor -Secondary Brake
| 26***66 | Sensor Group-Position; -Throttle | 1 |
| 28***86 | Kit-Seal | 1 |
| 30***87 | Pedal Group-Governor; -Secondary Brake | 1 |
308-8367 Platform Ar
| 30***67 | Platform Ar | 1 |
| 31***60 | Walkway Group | 1 |
| 31***61 | Mounting Group-Platform | 1 |
284-5802 Platform Ar -Rh
| 28***02 | Platform Ar; -Rh | 1 |
| 28***04 | Wiring Group-Platform; -Rh | 1 |
| 32***36 | Platform Group; -Rh | 1 |
328-1150 Platform Gp -Powered Stairway
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 29***02 | Pump Group-Electric Drive; (Operator Ladder Up, Down) | 1 |
| 32***50 | Platform Group; -Powered Stairway | 1 |
329-2436 Platform Gp -Rh
| 13***75 | Bracket-Link | 3 |
| 23***51 | Screw-Button Head; (M10x1.5x25-mm) | 17 |
| 32***36 | Platform Group; -Rh | 1 |
347-2406 Platform Gp -Powered Stairway
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 15***39 | Nut-Weld; (M6x1-Thd)(M6x1-6h Thd) | 2 |
| 29***02 | Pump Group-Electric Drive; (Operator Ladder Up, Down) | 1 |
321-8468 Seat & Mounting Gp -Cloth, Heated
| 27***35 | Seat Group-Suspension; -Cloth, Heated | 1 |
| 29***24 | Support As | 1 |
| 32***68 | Seat & Mounting Group; -Cloth, Heated | 1 |
276-6125 Seat & Mounting Gp -Cloth
| 27***25 | Seat & Mounting Group; -Cloth | 1 |
| 27***36 | Seat Group-Suspension; -Cloth | 1 |
| 29***24 | Support As | 1 |
276-6123 Seat & Mounting Gp -Cloth
| 27***23 | Seat & Mounting Group; -Cloth | 1 |
| 29***24 | Support As | 1 |
| 32***70 | Seat Group-Suspension; -Cloth | 1 |
312-8918 Seat Belt Gp -Retractable
| 0T***89 | Cap Screw (2" Long) | 2 |
| 22***56 | Bushing | 1 |
| 27***03 | Spacer; (11.7x19.8x25.4-mm Thk) | 1 |
272-2272 Seat Belt Gp -Retractable
| 0T***89 | Cap Screw (2" Long) | 2 |
| 27***72 | Seat Belt Group; -Retractable | 1 |
| 27***03 | Spacer; (11.7x19.8x25.4-mm Thk) | 1 |
316-9329 Seat Gp -Cloth
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 6 |
324-7903 Seat Gp -Cloth
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 09***24 | Plug-Button | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
316-9328 Seat Gp -Cloth, Heated
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 09***24 | Plug-Button | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
276-6136 Seat Gp-Suspension
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 19***25 | Suspension Group-Seat; -Air | 1 |
276-6135 Seat Gp-Suspension -Cloth, Heated
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 19***25 | Suspension Group-Seat; -Air | 1 |
321-8470 Seat Gp-Suspension -Cloth
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 19***25 | Suspension Group-Seat; -Air | 1 |
221-1206 Support Gp-Seat Belt
| 22***06 | Support Group-Seat Belt; -Cloth | 1 |
| 22***37 | Support As | 1 |
| 22***38 | Support As | 1 |
199-5725 Suspension Gp-Seat -Air
| 10***03 | Fastener | 26 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
294-9596 Tank Gp-Window Washer
| 11***86 | Cap; (Coolant Tank) | 1 |
| 29***96 | Tank Group-Window Washer | 1 |
| 7T***90 | Pump As; (Washer) | 1 |
304-7451 Trim Gp-Cab
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 17 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 16 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 10 |
276-6127 Visor Gp-Cab
| 27***27 | Visor Group-Cab | 1 |
| 30***54 | Bearing, Needle, Needle Bearing, Screen As; (Cab), Bearing-Needle | 1 |
| 9X***44 | Screw-Truss Head (M6x1x16mm); (M6x1x16-mm) | 4 |
276-6126 Visor Gp-Cab
| 19***44 | Visor As | 1 |
| 27***26 | Visor Group-Cab | 1 |
| 9X***45 | Screw-Truss Head (M6x1x20mm); (M6x1x20-mm) | 4 |
276-6128 Window Gp-Cab
| 27***28 | Window Group-Cab | 1 |
| 28***84 | Seal; (350-cm) | 0 |
| 31***33 | Glass-Side; (Rh) | 1 |
276-6129 Wiper Gp-Window
| 14***95 | Hose; (650-cm Each) | 0 |
| 1V***93 | Strap | 6 |
| 20***81 | Valve As-Check; (Window Washer) | 1 |
Power Train
300-7701 Adapter & Mtg Gp-Coupler
| 03***57 | Washer; (13x26x6-mm Thk) | 16 |
| 28***54 | Adapter Group-Coupler | 1 |
| 30***01 | Water Inlet Connection, Adapter & Mtg Group-Coupler | 1 |
283-6754 Adapter Gp-Coupler
| 14***11 | Ball Bearing | 1 |
| 14***37 | Guard | 1 |
| 14***20 | Plate | 2 |
292-0242 Axle & Mounting Gp
| 29***42 | Axle & Mounting Group | 1 |
| 29***43 | Shaft | 2 |
| 30***45 | Coupler, O Ring Seal | 2 |
330-5406 Blower & Mtg Gp-Air Cooling
| 11***59 | Mounting As | 4 |
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 14 |
| 24***80 | Washer-Hard | 4 |
284-5859 Blower Ar-Air -Generator Cooling
| 28***59 | Blower Ar-Air; -Generator Cooling | 1 |
| 29***46 | Duct Group-Air Cooling | 1 |
| 33***06 | Blower & Mtg Group-Air Cooling | 1 |
317-3802 Cabinet Gp-Inverter
| 09***05 | Washer-Bellevile | 43 |
| 09***56 | Screw-Machine; (M5x0.8x16-mm) | 76 |
| 09***26 | Lockwasher-Tooth; (M4 Id) | 26 |
313-4078 Contactor Gp -Retarding
| 31***78 | Contactor Group; -Retarding | 1 |
| 33***94 | Kit-Contact | 1 |
| 34***50 | Kit-Coil | 1 |
339-3576 Cooler Gp-Rear Axle Oil
| 12***23 | Bracket Assem. | 1 |
| 14***82 | Elbow As | 3 |
| 15***32 | Elbow As | 1 |
314-4243 Cover Gp-Rear Axle Housing
| 31***66 | Cover As | 1 |
| 31***43 | Cover Group-Rear Axle Housing | 1 |
| 5P***50 | Seal (Use As Required) | 0 |
302-7296 Cover Gp-Shipping -Rear Structure
| 18***79 | Cover-Housing | 1 |
| 30***96 | Cover Group-Shipping; -Rear Structure | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
291-5194 Cover Gp-Shipping -Contamination Control
| 1W***23 | Boot | 4 |
| 29***94 | Cover Group-Shipping; -Contamination Control | 1 |
| 5P***99 | Clamp; (Hose) | 4 |
291-5196 Cover Gp-Shipping -Contamination Control
| 29***96 | Cover Group-Shipping; -Contamination Control | 1 |
| 5N***32 | Boot | 4 |
| 5P***60 | Clamp-Hose | 4 |
292-0245 Drive Gp-Final
| 12***21 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 15***91 | Seal-O-Ring | 1 |
| 18***65 | Seal-O-Ring | 1 |
291-6846 Duct Gp-Air Cooling
| 11***45 | Clamp-Hose | 8 |
| 11***59 | Mounting As | 4 |
| 12***31 | Clip | 9 |
292-0244 Fastener Gp-Wheel -Rear
| 14***99 | Washer-Hard; (39x66x6-mm Thk) | 106 |
| 14***69 | Bolt; (M36x4x150-mm) | 106 |
| 29***44 | Fastener Group-Wheel; -Rear | 1 |
353-4672 Filter Gp-Oil
| 13***99 | Spring | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 2 |
| 23***83 | Base-Filter | 1 |
293-9420 Generator & Mtg Gp-Power
| 10***22 | Support-Engine | 2 |
| 14***37 | Guard | 1 |
| 14***20 | Plate | 1 |
283-6752 Generator Gp-Power -Wheel Traction
| 01***02 | Lockwasher | 32 |
| 03***93 | Screw-Machine; (10-32x19.05-mm) | 4 |
| 03***94 | Screw-Button Head; (5/16-18-Thd) | 34 |
284-5872 Housing Gp-Rear Axle
| 06***10 | Plug-Steel Pipe | 1 |
| 15***28 | Plate | 2 |
| 15***15 | Plate As | 2 |
284-5876 Lines Gp-Final Drive Filter
| 05***58 | "P" Clip | 2 |
| 13***38 | Connector | 4 |
| 16***75 | Hose As | 1 |
283-6751 Motor Gp-Electric -Wheel Traction
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 15***02 | Bolt-Socket Head; (M4x0.7x25-mm) | 1 |
| 22***88 | Seal-O-Ring | 2 |
303-5861 Motor Gp-Piston -Blower Fan
| 09***42 | Ring-Retaining | 1 |
| 12***48 | Seal-Shaft | 1 |
| 25***71 | Adapter | 1 |
324-2816 Mounting Gp-Control -Hoist, Transmission
| 32***05 | Plate As | 1 |
| 32***16 | Mounting Group-Control; -Hoist, Transmission | 1 |
| 33***19 | Plate As | 1 |
284-5878 Mounting Gp-Electric Motor -Traction
| 09***49 | Bolt; (M8x1.25x40-mm) | 2 |
| 12***11 | Spacer; (3x15x17-mm Thk) | 2 |
| 13***10 | Stud-Taperlock; (M10x1.5x45-mm) | 24 |
284-5909 Mounting Gp-Inverter Cabinet
| 25***80 | Washer; (25x144x12-mm Thk) | 4 |
| 28***09 | Mounting Group-Inverter Cabinet | 1 |
| 32***85 | Shim; (2-mm Thk) | 20 |
292-0264 Mounting Gp-Rim
| 14***99 | Washer-Hard; (39x66x6-mm Thk) | 324 |
| 20***56 | Guard | 2 |
| 29***64 | Mounting Group-Rim | 1 |
292-0266 Mounting Gp-Rim -Tire Inflation
| 14***76 | Spud | 6 |
| 14***79 | Cap | 6 |
| 14***00 | Seal | 6 |
292-0247 Planetary Gp-Final Drive
| 11***57 | Pin-Spring | 1 |
| 29***47 | Planetary Group-Final Drive | 1 |
| 29***51 | Carrier-Planetary | 1 |
292-0246 Planetary Gp-Final Drive
| 17***45 | Bearing As | 3 |
| 29***46 | Planetary Group-Final Drive | 1 |
| 29***55 | Gear-Planetary; (40-Teeth) | 3 |
284-5871 Power Train Ar
| 28***51 | Motor Group-Electric; -Wheel Traction | 2 |
| 28***71 | Power Train Ar | 1 |
| 28***72 | Housing Group-Rear Axle | 1 |
284-5874 Pump & Motor Gp-Fdr Lube
| 11***83 | Connector | 1 |
| 22***88 | Seal-O-Ring | 1 |
| 22***89 | Seal-O-Ring | 1 |
283-6740 Rectifier Gp-Revolving
| 12***60 | Diode-Standard | 3 |
| 12***61 | Diode-Reverse | 3 |
| 28***40 | Rectifier Group-Revolving | 1 |
294-0300 Rim Gp-Demountable
| 29***48 | Rim Group-Demountable | 6 |
| 29***00 | Rim Group-Demountable | 1 |
358-6252 Rim Gp-Demountable
| 14***15 | Rim Group-Demountable | 6 |
| 35***52 | Rim Group-Demountable | 1 |
149-3015 Rim Gp-Demountable
| 14***15 | Rim Group-Demountable | 1 |
| 15***24 | Ring-Lock | 1 |
| 15***26 | Band-Bead Seat | 1 |
292-0248 Rim Gp-Demountable
| 20***06 | Ring-Lock | 1 |
| 20***07 | Band-Bead Seat | 1 |
| 20***08 | Flange | 2 |
283-6739 Rotor Gp-Generator
| 28***39 | Rotor Group-Generator | 1 |
| 28***40 | Rectifier Group-Revolving | 1 |
| 28***42 | Armature As | 1 |
284-5892 Shaft Gp-Drive
| 28***92 | Shaft Group-Drive | 1 |
| 29***67 | Slip Joint Group | 1 |
| 8T***70 | Bolt; (M24x3x140-mm) | 8 |
292-0267 Slip Joint Gp
| 25***02 | Spider & Bearing Group | 2 |
| 29***95 | Kit-Seal; (Shaft) | 1 |
| 29***67 | Slip Joint Group | 1 |
309-4500 Spindle Gp
| 10***44 | Boss; (M10x1.5x60-mm) | 1 |
| 22***91 | Seal-O-Ring | 6 |
| 30***92 | Spindle As, Air Intake Manifold | 1 |
337-6739 Tray Gp-Contactor
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***27 | Screw-Machine; (M4x0.7x12-mm) | 2 |
| 13***58 | Washer-Bellevile | 2 |
337-6722 Tray Gp-Filter
| 16***65 | Retainer | 6 |
| 20***23 | . Bracket, Filter Element-Air; (Inverter Cabinet) | 1 |
| 33***22 | Tray Group-Filter | 1 |
337-6746 Tray Gp-Thyristor
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 2 |
| 13***58 | Washer-Bellevile | 2 |
| 17***21 | Washer-Bellevile | 12 |
313-7042 Valve Gp-Solenoid
| 27***60 | Solenoid | 1 |
| 31***42 | Valve Group-Solenoid | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
292-0259 Wheel Gp-Final Drive & Brake -Rear
| 09***11 | Pin; (Spring) | 1 |
| 10***93 | Plate-Serial; (Front Wheel) | 1 |
| 10***21 | Ring-Retaining | 1 |
Service Equipment And Supplies
9g-9288 Cap Gp-Protection -Hydraulic Tank
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 2J***61 | Ring-Retaining | 1 |
312-6444 Film Gp
| 29***37 | Film-Identification; (Caterpillar) | 1 |
| 31***44 | Film Group | 1 |
| 31***87 | Film-Identification; (795f Ac, Rh) | 1 |
331-8500 Film Gp-International -Inverter Cabinet
| 22***20 | Film-Warning; (Hot Surface) | 11 |
| 22***48 | Film-Warning; (Shock Hazard, Read Omm) | 15 |
| 32***53 | Film-Identification; (High Voltage) | 1 |
333-8977 Film Gp-International -Engine
| 10***08 | Film-Information; (Engine Oil)(Install On Oil Filter Cap) | 1 |
| 20***59 | Plate-Information; (Fuel Priming Pump On, Off) | 1 |
| 22***45 | Film-Warning; (Shock Hazard) | 3 |
331-9024 Film Gp-International -Radiator
| 22***57 | Film; (Warning) (Hot Fluid) (Next To Radiator Fill Cap) (On Forward Face Of Hydraulic Tank Above Filler Neck) | 1 |
| 23***77 | Film-Warning; (No Step)(Fuel Tank) | 2 |
| 33***24 | Film Group-International; -Radiator | 1 |
331-8539 Film Gp-International -Power Generator
| 22***30 | Film-Warning; (Electric Shock, Read Manual) | 2 |
| 22***48 | Film-Warning; (Shock Hazard, Read Omm) | 1 |
| 26***18 | Film-Warning; (Crush Hazard, Stay Back) | 1 |
331-8544 Film Gp-International -Electric Retarder
| 22***20 | Film-Warning; (Hot Surface) | 2 |
| 22***21 | Film-Warning; (Hot Surface) | 2 |
| 32***89 | Film-Warning; (Shock, Electrocution Hazard) | 2 |
335-1684 Film Gp-U.S. -Radiator
| 22***56 | Film; (Warning) (Hot Fluid) (Underside Of Door To Radiator Fill) | 1 |
| 31***28 | Film-Warning; (Falling Hazard, Read Omm) | 2 |
| 33***84 | Film Group-U.S.; -Radiator | 1 |
335-1682 Film Gp-U.S. -Generator
| 22***47 | Film-Warning; (Shock Hazard, Read Omm) | 1 |
| 24***57 | Film-Warning; (Electrocution Hazard, Read Omm) | 2 |
| 32***90 | Film-Warning; (Hand Crush Hazard, Read Omm) | 1 |
335-1683 Film Gp-U.S. -Retarder
| 22***26 | Film-Warning; (Hot Surface) | 2 |
| 22***27 | Film-Warning; (Hot Surface) | 2 |
| 32***88 | Film-Warning; (Shock, Electrocution Hazard) | 2 |
335-1681 Film Gp-U.S. -Converter
| 22***26 | Film-Warning; (Hot Surface) | 11 |
| 22***47 | Film-Warning; (Shock Hazard, Read Omm) | 15 |
| 33***81 | Film Group-U.S.; -Converter | 1 |
335-1685 Film Gp-U.S. -Engine
| 10***08 | Film-Information; (Engine Oil)(Install On Oil Filter Cap) | 1 |
| 20***59 | Plate-Information; (Fuel Priming Pump On, Off) | 1 |
| 22***28 | Film-Warning; (Shock Hazard) | 3 |
335-1686 Film Gp-U.S. -Chassis
| 27***70 | Film-Warning; (Crush Hazard, Read Omm) | 6 |
| 27***72 | Film-Warning; (High Pressure, Read Omm) | 6 |
| 28***57 | Plate-Warning; (Crush Hazard, Read Omm) | 2 |
336-2296 Plate & Film Gp -Tank & Filter
| 23***27 | Film-Identification; (Fuel) | 2 |
| 32***77 | Film-Identification; (Steering Oil) | 1 |
| 33***96 | Plate & Film Group; -Tank & Filter | 1 |
336-2345 Plate & Film Gp -Electrical
| 28***36 | Film-Identification; (Circuit Breaker)(Main) | 1 |
| 28***37 | Film-Identification; (Circuit Breaker)(Alternator) | 1 |
| 33***45 | Plate & Film Group; -Electrical | 1 |
320-2131 Plate & Film Gp
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 2 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 2 |
336-2907 Plate & Film Gp -Radiator Top
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 33***07 | Plate & Film Group; -Radiator Top | 1 |
| 3N***90 | Plate Serial Number; On R.H. Rear Bank Of Cylinder Block As Viewed From Rear Of Engine | 1 |
313-9482 Plate & Film Gp -U.S.
| 31***82 | Plate & Film Group; -U.S. | 1 |
| 32***29 | Plate & Film Group; -U.S. | 1 |
| 33***81 | Film Group-U.S.; -Converter | 1 |
320-2129 Plate & Film Gp -U.S.
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 2 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 2 |
339-3599 Plate & Film Gp -Control Box
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
| 29***66 | Film-Identification; (Control Panel) | 1 |
| 29***30 | Film-Identification; (Control Box) | 1 |
284-5869 Plate & Film Gp
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 28***69 | Plate & Film Group | 1 |
| 31***44 | Film Group | 1 |
333-6443 Plate & Film Gp -Chassis
| 17***45 | Film-Stripe; (Reflective, Red)(Reflector) | 2 |
| 22***12 | Film; (Warning) (Jump Start) (On Outside Of Battery Compartment Door) | 1 |
| 23***86 | Plate-Identification; (Machine)(17-Pin) | 1 |
312-6445 Plate & Film Gp -International
| 31***45 | Plate & Film Group; -International | 1 |
| 32***31 | Plate & Film Group | 1 |
| 33***00 | Film Group-International; -Inverter Cabinet | 1 |
315-5611 Plate Gp-Engine Identification
| 31***11 | Plate Group-Engine Identification | 1 |
| 3N***90 | Plate Serial Number; On R.H. Rear Bank Of Cylinder Block As Viewed From Rear Of Engine | 1 |
| 7B***28 | Drive Screws-2 Required For Installing | 2 |
304-1175 Service Center Gp
| 03***60 | Rivets | 8 |
| 11***27 | Fitting; (Quick Disconnect, Male) | 1 |
| 13***74 | Clip-Loop | 1 |
291-6881 Service Center Gp
| 03***60 | Rivets | 8 |
| 13***74 | Clip-Loop | 1 |
| 13***71 | Spacer | 2 |
359-1319 Service Center Gp
| 03***60 | Rivets | 8 |
| 11***27 | Fitting; (Quick Disconnect, Male) | 1 |
| 12***63 | Adapter Group-Fast Fill Fuel; (Auto Shutoff) | 1 |
359-1318 Service Center Gp
| 03***60 | Rivets | 8 |
| 12***63 | Adapter Group-Fast Fill Fuel; (Auto Shutoff) | 1 |
| 13***74 | Clip-Loop | 1 |
Steering System
303-9538 Accumulator Gp-Steering -Charged
| 11***10 | Protector-Gas Valve | 1 |
| 15***06 | Valve-Gas | 1 |
| 17***94 | Kit-Seal; (Ride Control Accumulator) | 1 |
348-9271 Accumulator Gp-Steering -Charged
| 11***10 | Protector-Gas Valve | 1 |
| 17***94 | Kit-Seal; (Ride Control Accumulator) | 1 |
| 19***50 | Core | 1 |
284-5853 Cylinder & Mtg Gp-Steering
| 15***70 | Cover | 4 |
| 15***82 | Spacer | 4 |
| 15***83 | Washer; (63.5x120x12-mm Thk) | 2 |
305-3809 Cylinder Gp-Steering -Rh
| 09***79 | Pin-Spring | 1 |
| 10***44 | Grommet | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
305-3808 Cylinder Gp-Steering -Lh
| 10***19 | Ring-Retaining | 1 |
| 16***11 | Seal As-Buffer | 1 |
| 16***24 | Seal-U-Cup | 1 |
291-6867 Fastener Gp-Steering Arm
| 14***99 | Washer-Hard; (39x66x6-mm Thk) | 20 |
| 29***67 | Fastener Group-Steering Arm | 1 |
| 9X***52 | Bolt; (M36x4x130-mm) | 20 |
178-4032 Head Gp-Pump
| 08***72 | Plug-O-Ring | 2 |
| 12***94 | Plug; (Break Off) | 8 |
| 16***67 | Valve | 1 |
359-9125 Lines Gp-Steering -European Market
| 13***60 | Spacer; (11x19x10-mm Thk) | 1 |
| 1P***67 | Flange-Half (43.31 mm Id) | 4 |
| 23***75 | Seal-Rectangular | 2 |
284-5854 Lines Gp-Steering
| 12***74 | Clip-Loop; (12.7mm Id) | 4 |
| 12***33 | Clip | 1 |
| 15***33 | Valve Group-Steering; -Control | 1 |
284-5841 Link Gp-Steering
| 28***41 | Link Group-Steering | 1 |
| 29***27 | Arm-Steering; (Lh) | 1 |
| 29***28 | Arm-Steering; (Rh) | 1 |
294-9875 Link Gp-Steering
| 19***02 | Stud-Ball | 2 |
| 19***03 | Ring-Retainer | 2 |
| 19***04 | Cover-Dust; (Steering Cylinder) | 2 |
291-6896 Pump & Mtg Gp-Steering
| 16***11 | Stud-Taperlock; (M20x2.5x85-mm) | 4 |
| 29***96 | Pump & Mtg Group-Steering | 1 |
| 30***50 | Pump Group-Piston | 1 |
192-3897 Pump Gp-Metering -Hmu
| 14***37 | Kit-Seal; (Steering Pump) | 1 |
| 19***97 | Pump Group-Metering; -Hmu | 1 |
| 19***71 | Bolt | 1 |
301-9250 Pump Gp-Piston
| 09***58 | Ring-Retaining | 2 |
| 11***30 | Screw; (1-5/16-Thd) | 2 |
| 11***16 | Pin | 4 |
165-9366 Rotating Gp-Pump
| 16***59 | Retainer | 1 |
| 16***60 | Guide-Ball | 1 |
| 16***61 | Shim; (0.5-mm Thk) | 2 |
313-7050 Rotating Gp-Pump
| 09***29 | Ring; (Retaining) | 1 |
| 14***73 | Roller | 4 |
| 16***83 | Shaft | 1 |
357-5498 Steering Column Gp
| 24***78 | Spring | 1 |
| 35***98 | Steering Column Group | 1 |
| 35***00 | Kit-Lever; (Tilt Steering Wheel Control) | 1 |
349-1428 Steering Column Gp-Adjustable
| 18***35 | Nut; (7/8-20-Thd) | 1 |
| 18***40 | Kit-Cover; (Steering Column) | 1 |
| 18***43 | Cover; (Steering Column) | 1 |
155-3744 Valve Gp-Check
| 15***44 | Valve Group-Check; -Steering-Parking Brake | 1 |
| 31***34 | Kit-Seal | 1 |
236-4999 Valve Gp-Pump Control -Pressure, Flow Compensator
| 12***94 | Plug; (Break Off) | 5 |
| 18***02 | Seal | 1 |
| 23***99 | Valve Group-Pump Control; -Pressure, Flow Compensator-Implement, Rear | 1 |
253-3425 Valve Gp-Pump Control -Pressure Compensator
| 10***03 | Seal-O-Ring | 1 |
| 11***99 | Plug | 1 |
| 11***22 | Spring | 1 |
333-4746 Valve Gp-Solenoid & Manifold -Blower Fan, Final Drive Lubrication, Steering
| 13***46 | Kit-Seal | 1 |
| 20***86 | Kit-Seal; (Hydraulic) | 1 |
| 27***09 | Valve-Relief; (Hydraulic) | 1 |
288-4351 Valve Gp-Solenoid & Relief
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 14***08 | Plug As. | 1 |
| 15***44 | Valve Group-Check; -Steering-Parking Brake | 1 |
151-5933 Valve Gp-Steering
| 14***45 | Cover | 1 |
| 14***47 | Cover | 1 |
| 15***33 | Valve Group-Steering; -Control | 1 |
309-4131 Wheel & Brake Gp -Front
| 13***00 | Clip; (Tab) | 1 |
| 14***13 | Stud | 54 |
| 14***20 | Retainer | 1 |
298-5644 Wheel, Brake & Suspension Gp -Front
| 03***67 | Ring; (Back Up) | 1 |
| 03***39 | Seal-O-Ring (Id=9.25mm) | 1 |
| 11***61 | Seal-O-Ring | 1 |
795F AC serial number reference
The PIN plate on a 795F AC mounts on the front frame near the access stairway/steps; Cat also stamps the number into the frame as a backup. Read it as a 17-character PIN: the first 3 characters are the serial-number prefix identifying model and assembly plant, the last 8 characters are the unit's serial number (prefix plus sequential unit number, e.g. ERM00164).
| Prefix | Identifies | Notes |
|---|---|---|
| ERM | 795F AC Mining Truck, all configurations | ERM1-UP is the documented serial-prefix range for the 795F AC. Engine is the Cat C175-16, quad-turbocharged, air-to-air aftercooled diesel, driving the Cat AC electric drive system (rear-mounted generator, IGBT inverter, AC induction wheel motors). MSD II and Gateless Coal body options, and 56/80R63 or 59/80R63 tire fitments, are option-level choices, not separate prefix ranges. No confirmed end-of-range or plant/region code split; treat as an open 1-UP range and confirm with a Cat dealer for a specific unit. |
Frequently asked questions
What engine does the Caterpillar 795F AC use?
A Cat C175-16 diesel: 16 cylinders, quad-turbocharged, air-to-air aftercooled, rated at roughly 2,536 kW (3,400 hp) gross per SAE J1995. It drives Cat's AC generator rather than a mechanical transmission.
What is the operating weight of the 795F AC?
Gross machine weight runs about 570-576 t depending on dump body choice and configuration (MSD II versus gateless coal body, with or without extension kits). Nominal rated payload is in the 345 t class; confirm exact figures against the data plate and body spec for a given unit.
What replaced the Caterpillar 795F AC?
No distinct successor model exists. Caterpillar has kept the 795F AC in production, updating it in place with newer VIMS generations and trolley-assist compatibility shared with the 794 AC, 796 AC and 798 AC. Battery-electric prototype trucks are in customer field trials, but no production diesel replacement has been announced.
What 795F AC owners discuss
How does the AC drive system on the 795F AC compare to older mechanical-drive Cat trucks in daily operation and reliability?
Operators report faster climbs on grade at full payload versus mechanical-drive trucks, lower fuel burn per tonne hauled, and quieter running at idle from the variable hydraulic-driven cooling blower. The brushless generator and AC induction wheel motors carry longer service intervals than older DC-drive brush-type systems that need periodic brush replacement. Field consensus rates the drivetrain durable, with top units reported running well past 60,000 hours on original wheel motors when duty cycle and cooling-system upkeep stay on schedule. Wheel motor life still tracks closely with grade percentage, cycle time, and dust ingestion at the site, so actual numbers vary by configuration and application.
What engine quirks come up around the C175-16 diesel in day-to-day operation?
The C175-16's turbocharged, common-rail fuel system is tuned tight for this truck's power band; low boost or black/blue smoke gets traced most often to intake leaks, a fouled turbo, or a sticking wastegate rather than injector failure. Turbo bearings run off engine oil supply, so any oil starvation event, such as a low oil pressure alarm ignored or shutdown without a proper cooldown idle, risks turbo damage first. This engine generation's titanium-impeller turbos carry longer fatigue life than earlier cast wheels, but oil cleanliness and correct warm-up and cool-down idle periods remain the most repeated advice for turbo longevity.
What tire wear patterns show up most on 795F AC haul trucks?
Tire life on this class of rigid-frame haul truck depends more on haul road condition and cycle discipline than on the drivetrain itself. Community consensus across large AC-drive trucks points to heat buildup from underinflation, overspeed on grade, and sustained high ambient temperature as the leading causes of premature wear and casing damage, more so than the make of drive motor. 56/80R63 and 59/80R63 are the approved fitments; matching tire pressure and TKPH (tonne-kilometer-per-hour) rating to the actual haul profile is repeated advice, since a tire correctly rated for a shorter, cooler haul can fail early if reassigned to a longer, hotter route.
What electrical or sensor issues get reported on the 795F AC?
The VIMS onboard monitoring system logs sensor and fault data across the truck; on earlier VIMS software revisions operators noted nuisance fault events, transient trips that clear on their own but still log and interrupt the display. Later VIMS revisions retuned event definitions to cut down on these false alarms. Beyond VIMS, most sensor complaints trace to wiring harness connectors and PWM sensor inputs exposed to vibration and dust rather than to the AC drive components themselves — the inverter cabinet stays sealed and pressurized and is reported as low-maintenance in the field.
How does the dynamic retarding system behave, and is there anything to watch for?
Descending loaded, the wheel motors act as generators and dump retarding power through the radial grid resistors, with an onboard grid thermal calculator tracking grid temperature in real time. If retarding demand exceeds the grid's rated dissipation, the system automatically blends in the mechanical service brakes — this is standard, expected behavior on long grades, not a fault condition. A truck that starts blending in mechanical brakes earlier or more often than it used to on a grade it previously handled on dynamic retarding alone should have the grid, blower, and thermal sensors checked before returning to service. Have your dealer verify the retarding and braking system before resuming loaded descents.
Is trolley assist worth running on a 795F AC, and does it add extra maintenance items?
Where trolley infrastructure exists, sites report large diesel fuel burn cuts while under wire and faster speed on grade, which extends engine service life since the diesel engine does far less work during those trolley segments. The added maintenance load centers on the pantograph pickup components and associated contactors rather than the core AC drive, so trucks running trolley routinely should get those pickup components inspected on a tighter interval than the rest of the drivetrain.
What should a buyer check on a used 795F AC before purchase?
Pull full VIMS and payload history if available — it shows overload cycles, fault history, and true operating time by component, not just the hour meter. Get wheel motor and inverter cabinet hours and inspection records specifically, since those carry the highest replacement cost on this class of truck. Check the frame and dump body (MSD II or Gateless Coal) for cracking or repair welds consistent with the fragmentation and abrasion profile of its prior mine site — a body sized for a different material can show unusual stress patterns. Confirm the dynamic retarding and mechanical brake blending function during a test cycle, and review PM records for turbo oil-supply related work on the C175-16. Given the safety-critical nature of the braking, retarding, and high-voltage drive systems, have your dealer verify all of these systems independently before purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 795F AC part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.