Caterpillaroff-highway trucktruck
Caterpillar 793B
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 793B is an ultra-class, mechanical-drivetrain off-highway mining haul truck built from 1992 to 1996, the second generation of Cat's 793 line (serial number prefix 1HL). It replaced the original 793 (1991-92) and was itself replaced by the 793C from 1996 onward. The 793B sits in the 240-ton payload class, rated at roughly 218 t (240 US tons, about 480,000 lb) of payload with a fully loaded operating weight near 376.5 t (830,000 lb). Power comes from a Cat 3516 EUI (Electronic Unit Injection) V16 diesel, a 69 L engine distinct from the 3516B and 3516B HD used on the later 793C and 793D, with gross output cited in the range of roughly 1,530 to 1,610 kW (2,050 to 2,160 hp) depending on the source. Drive runs through a torque-converter powershift transmission, a differential, and double-reduction planetary final drives, with oil-cooled multiple-disc brakes at all four corners and 40.00-R57 tires standard. The 793B was sold essentially as one rigid dump-body configuration for large surface mines and quarries, with factory variation limited mainly to body liner, tire, and lighting/fire-suppression options typical of the class.
The 793B's defining change from the original 793 was full electronic engine management: the 3516 EUI replaced the earlier mechanically governed fuel system, and Caterpillar paired it with the Vital Information Management System (VIMS), giving the 793B onboard payload measurement and fault logging its predecessor lacked. The follow-on 793C then moved to the further-refined 3516B engine with more power and, in later revisions, common-rail hydraulics, so the B-series marks a distinct step in the family's electronic evolution rather than a simple facelift. Today the 793B is a legacy platform; most surviving units are 30-plus years old, so the active market is almost entirely parts, rebuilds, and remanufactured components rather than complete working trucks. Its lasting relevance comes from mechanical commonality with same-era 785/789/793 siblings that share 3500-series engine architecture and similar final-drive and brake packages, which keeps demand alive for reman 3516 EUI engines, final drive and differential components, and structural or body parts even as complete 793B trucks age out of frontline mining fleets.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 793B specifications
Engine
| Engine model | Cat 3516, 16-cylinder V-type diesel |
| Gross power (SAE J1995) | 1,611 kW (2,160 hp); production-history summaries note later-build units rated up to approx. 1,715 kW (2,300 hp), varies by build series/serial range |
| Displacement | 69 L (4,209 cu in) |
| Bore x stroke | 170 x 190 mm (6.7 x 7.5 in) |
| Emissions tier | Built 1992-1996, predates nonroad diesel emissions-tier certification for this power class |
Weights
| Operating weight, fully loaded (GVW) | 376.5 t (830,000 lb) |
| Rated payload | 218 t (240 tons / 480,600 lb) |
| Transport/shipping weight (unit-specific) | approx. 146.8 t (323,709 lb), varies by configuration and actual unit condition |
Dimensions
| Transport length | 12.87 m (42 ft 3 in) |
| Transport width | 7.41 m (24 ft 4 in) |
| Transport height | 6.43 m (21 ft 1 in) |
| Outside turning radius | 28.4 m (93 ft 2 in) |
| Standard tire size | 40.00-R57 |
Performance
| Top travel speed, loaded | 53.6 km/h (33.3 mph) |
| Dump body loading height (raised) | 5.87 m (19 ft 3 in) |
| Dump body capacity, heaped | 129 m3 (169 cu yd) |
Service capacities (summary)
| Fuel, hydraulic, cooling, engine oil | Not documented in available spec sources for this discontinued 1992-1996 series. Confirm exact refill capacities against the machine's own OEM service manual or serial-specific parts book. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
793B fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat 3516 EUI V16 diesel | Commonly cited around 189-194 L (50-51 US gal) for the 3516 EUI engine family used across the 784B/785B/789B/793B truck line. The exact truck-installed figure (with external oil cooler lines) as listed in the 793B OMM could not be independently corroborated in public documentation - verify against the OMM or dealer before servicing. | Cat DEO (Diesel Engine Oil). Viscosity by ambient temperature per Cat guidance: SAE 10W-30 in cold climates (below roughly 0C/32F), SAE 15W-40 for typical temperate operation, SAE 40 in sustained hot climates (above roughly 30C/86F). Cat DEO-ULS/DEO synthetic grades are the modern equivalents where low-sulfur fuel is used. |
| Cooling system | Not documented in publicly available sources for this exact model/serial range - capacity varies with radiator/aftercooler configuration. Verify against the OMM or dealer. | Cat heavy-duty antifreeze/coolant (Cat DEAC) was the typical factory fill for this production era (1992-1996). Cat ELC (Extended Life Coolant) is Cat's current recommended fill for extended service life and is compatible for conversion per Cat's coolant guidelines. |
| Fuel tank | Not corroborated specifically for the 793B in available public documentation. Varies by tank option fitted. Verify against the OMM or dealer. | No. 2-D diesel fuel meeting Cat's engine fuel specification for the 3516 EUI engine; ultra-low-sulfur diesel where required by local emissions regulation. |
| Transmission (Cat powershift, torque converter compartment) | Not independently corroborated for the 793B in available public documentation. Verify against the OMM or dealer. | Cat TDTO (Transmission/Drive Train Oil, TO-4 performance level). Viscosity by ambient temperature: SAE 10W below roughly 0C (32F), SAE 30 for moderate climates, SAE 50 for sustained hot climates above roughly 30C (86F). |
| Differential and bevel gear (rear axle housing) | Not independently corroborated for the 793B in available public documentation. Verify against the OMM or dealer. | Cat TDTO (TO-4), same climate-based viscosity guidance as the transmission compartment (SAE 10W/30/50 by ambient temperature). |
| Final drives (each, rear wheels) | Not independently corroborated for the 793B in available public documentation; large rigid-frame trucks of this class typically carry a similar per-side fill to the differential compartment but the exact OMM figure could not be confirmed. Verify against the OMM or dealer. | Cat TDTO (TO-4), same climate-based viscosity guidance as the transmission and differential (SAE 10W/30/50 by ambient temperature). |
| Hydraulic system and tank (steering, hoist, brake-cooling circuit) | Not independently corroborated for the 793B in available public documentation. Verify against the OMM or dealer. | Cat TDTO or Cat HYDO Advanced depending on whether the hydraulic and oil-cooled-brake circuit shares the TO-4 powertrain fluid or runs a dedicated hydraulic oil on this configuration - confirm the circuit architecture against the machine's OMM before topping off. |
| Grease (chassis and pin lubrication points, spec only) | Not applicable - grease points, not a refill-volume compartment. | Cat multipurpose extreme-pressure chassis grease, NLGI 2 grade for normal operating temperatures; NLGI 1 or 0 may be specified by Cat for sustained sub-zero cold-weather operation. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 793B maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the 793B beyond the schedule
Predictive Maintenance & Fluid Analysis
The 793B's VIMS onboard system logs payload cycles, brake-oil temperature, and fault events; pull that history at every service instead of relying on the hour meter alone. Run S.O.S fluid analysis on the engine, torque converter and transmission, differential, final drives, and hydraulic tank on the same cadence as oil changes. On a 30-plus-year-old 3516 EUI, trending iron and copper counts catches injector and bearing wear long before a shutdown. Watch coolant condition closely; the 3516's cast-iron block and liners are unforgiving of neglected ELC and SCA levels.
Corrective & Common Repairs
Expect recurring work on the 3516 EUI's turbocharger, injectors, and wiring harness connectors; corrosion and injector-solenoid faults are the most common electronic unit-injection complaints on engines this age. Oil-cooled multi-disc brakes need cooler-core cleaning and cooling-oil pump attention when brake-oil temperature alarms repeat on grade-heavy haul routes. Duo-cone seals at the wheel hubs and final drives are frequent seep points; chase leaks at the seal itself, not just the drain plug. Rebuilt VIMS modules and payload sensors are a common fix on trucks that sat idle for long stretches.
Overhaul & Rebuild Points
Plan a 3516 EUI top-end inspection (turbocharger, injectors, valve train) well ahead of a full engine rebuild; most 793B engines still in service have already been through at least one reman cycle. Evaluate the transmission clutch packs, torque converter, differential, and planetary final drives as one system using oil-analysis wear trends rather than replacing components piecemeal. Inspect the frame, hoist-cylinder mounts, and body pivots for cracking before committing to any major powertrain rebuild; a cracked frame will outlast the warranty on new driveline components.
Seasonal & Environment Servicing
Cold-climate 793B units need block heaters, correct-viscosity Cat DEO, and starting-aid systems on the 3516 EUI checked before each cold season; this engine's high compression and large displacement are hard on starters and batteries if fluids are wrong. In hot, dusty surface-mine settings, clean the aftercooler and radiator cores more often than the standard interval, and service cabin and engine air filtration more frequently to keep abrasive dust out of the EUI's electronic injectors. In wet seasons, check final drive and differential seals for water intrusion given the truck's age.
793B common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1D-4540 | Bolt,Machine Fuel Filter Mounting | Fuel system service | Check fitment → |
| 1R-0755 | Filter As-Fuel | Fuel system service | Check fitment → |
| 131-7953 | Tank & Filter Ar-Fuel | Fuel system service | Check fitment → |
| 115-8148 | Tank & Filter Ar-Fuel | Fuel system service | Check fitment → |
| 131-7954 | Tank & Filter Ar-Fuel | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
793B fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| MID 036 CID 0100 FMI 03 | Engine oil pressure sensor circuit reads above the normal voltage range. | Open circuit or short to +battery in the oil pressure sensor wiring or connector, or a failed sensor. | Check the sensor connector and harness for damage or corrosion, confirm supply voltage at the sensor, replace the sensor if wiring checks good. |
| MID 036 CID 0110 FMI 04 | Engine coolant temperature sensor circuit reads below the normal voltage range. | Short to ground in the coolant temperature sensor circuit, or a failed sensor. | Inspect wiring and connector for a pinched or grounded wire, check sensor resistance at a known temperature, replace sensor if wiring tests good. |
| MID 036 CID 0102 FMI 03 | Boost (intake manifold) pressure sensor circuit reads above the normal voltage range. | Open circuit or short to +battery on the boost pressure sensor signal wire, or a failed sensor. | Check harness and connector condition, confirm sensor supply voltage, replace sensor if wiring and supply test good. |
| MID 036 CID 0190 FMI 08 | Engine speed/timing sensor signal is abnormal or missing. | Damaged sensor, incorrect sensor air gap, or a wiring fault on the speed/timing sensor the EUI system uses for injection timing. | Check sensor gap and mounting, inspect wiring for chafing, reset the gap to spec or replace the sensor. |
| MID 036 CID 0168 FMI 02 | Electrical system (battery) voltage signal to the engine ECM is erratic or intermittent. | Loose or corroded battery and ground connections, a failing charging system, or intermittent ECM power wiring. | Check battery terminals and ground straps and verify charging system output before chasing the ECM wiring. |
| MID 081 CID 0296 FMI 12 | Transmission electronic control module reports a failed or bad internal device. | Internal fault in the transmission control module or a related component it cannot recover from. | Connect Cat ET to confirm the code is active, cycle power, and replace the transmission control module if the fault stays active. |
| MID 082 CID 0533 FMI 12 | Brake/cooling electronic control module reports a failed or bad internal device. | Internal fault in the module that manages the oil-cooled brake and cooling system, or a failed related component. | Connect Cat ET to confirm active status, check module power and ground, replace the module if the fault stays active. |
| Event - Low Engine Oil Pressure | Message center/VIMS warning that engine oil pressure has dropped below the safe threshold for current engine speed. | Low oil level, worn oil pump, restricted suction, or a failing pressure sensor circuit. | Stop the engine, check oil level and the sensor circuit before restarting, investigate the pump and filter if level and sensor check out. |
| Event - High Engine Coolant Temperature | Message center/VIMS warning that engine coolant temperature is above the normal operating range. | Low coolant level, a blocked radiator or cooling package, a failed fan clutch, or a stuck thermostat. | Check coolant level and inspect the cooling package for debris, verify fan clutch operation before further diagnosis. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
793B attachments & work tools
Dump body
Factory-fit body for this generation is a conventional flat-floor/trough dump body sized to the truck's rated payload, about 218 t (240 tons) net with roughly 129 m3 (169 yd3) struck capacity. High Performance (HP) and Mine Specific Design (MSD) bodies are marketed for the 793 platform today; treat these as newer-generation body technology and confirm factory or retrofit fit for this chassis with your dealer.
Body liners and wear protection
Bolt-on or weld-in steel liner packages and wear plates are offered for the body floor, front wall, and other high-impact zones across this truck's size class, cutting structural wear and reducing material carry-back. Confirm the exact liner kit against the truck's original body and current parts availability.
Payload-retention body accessories
Tail extensions, sideboards, tumblebars, rock boxes, and rock shedders are common options across the 793 body class to help hold rated payload and cut spillage on haul roads. These are size-class-typical rather than confirmed factory-original items for this generation, verify fitment with your dealer.
Hoist cylinder and body mounting
Body is raised by twin two-stage, nitrogen-charged hydraulic hoist cylinders mounted pin-to-pin with double-shear clevis attachments top and bottom, a mounting style consistent across the mechanical-drive 793 family. Hoist hydraulics run off engine-driven pumps sized to the truck's diesel engine rather than a bolt-on kit.
Tires and rims
Standard fitment on this generation is 40.00-R57 off-the-road tires. Within the size class, standard and wide rim/flange combinations are offered, and larger tire options can require axle or rim modification, so confirm compatible tire/rim/flange combinations with your dealer.
Drivetrain and final drives
Mechanical drivetrain with lock-up torque converter, planetary powershift transmission, and double-reduction planetary final drives. This is the standard configuration for the mechanical-drive 793 series and not an optional add-on; confirm the exact gear-speed count for this generation with your dealer, since that detail is not confirmed specifically for the 793B.
Operator guarding
ROPS/FOPS-certified cab canopy is standard protection for the operator station. Radiator and engine-compartment screens or rock guards are typical options across this truck class against rock-strike damage; confirm the exact factory option list for this generation with Cat literature or your dealer.
All 793B assemblies by section
Every catalogued assembly group for the Caterpillar 793B. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
7e-6871 Aftercooler Gp-Water
| 10***74 | Gasket | 2 |
| 1T***65 | Bolt 2.54 cm (1" Long) | 48 |
| 28***36 | Core As-Aftercooler | 2 |
6i-2973 Air Cleaner & Mounting Gp
| 2G***48 | Brace | 1 |
| 4M***70 | Grommet; (9.52mm Id) | 2 |
| 5K***68 | Fitting; (Pipe Hexagon) | 2 |
9y-8930 Air Cleaner Gp -Rh, Lh
| 00***50 | Retainer; (Ring) | 2 |
| 12***96 | Flange As-Air Cleaner | 2 |
| 1N***61 | Nut-Special | 2 |
4p-4862 Bypass Gp-Exhaust
| 03***67 | Connector-Flared -- Adapter To Hose As. | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 10***01 | Hose As | 1 |
117-0062 Bypass Gp-Exhaust
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 03***67 | Connector-Flared -- Adapter To Hose As. | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
100-8020 Bypass Gp-Exhaust
| 10***19 | Base As | 1 |
| 10***20 | Bypass Group-Exhaust | 1 |
| 1P***59 | Washer; (0.063-In Thk) | 1 |
111-6118 Bypass Gp-Exhaust
| 10***19 | Base As | 1 |
| 11***13 | Stop-Valve | 1 |
| 11***17 | Cover | 1 |
126-9398 Bypass Gp-Exhaust
| 11***13 | Stop-Valve | 1 |
| 11***17 | Cover | 1 |
| 11***72 | Diaphragm | 1 |
107-8753 Bypass Gp-Exhaust
| 10***19 | Base As | 1 |
| 10***53 | Bypass Group-Exhaust | 1 |
| 1P***59 | Washer; (0.063-In Thk) | 1 |
114-1981 Cartridge Gp-Turbocharger
| 11***81 | Cartridge Group-Turbocharger | 1 |
| 11***82 | Housing-Bearing | 1 |
| 11***84 | Wheel-Compressor | 1 |
102-0281 Cartridge Gp-Turbocharger
| 10***81 | Cartridge Group-Turbocharger | 1 |
| 10***23 | Wheel-Compressor | 1 |
| 10***42 | Kit-Cartridge; (Turbocharger) | 1 |
122-0353 Cartridge Gp-Turbocharger
| 11***84 | Wheel-Compressor | 1 |
| 12***53 | Cartridge Group-Turbocharger; -Low Pressure | 1 |
| 12***56 | Shroud-Heat | 1 |
4p-6031 Cartridge Gp-Turbocharger
| 1N***65 | Collar-Thrust | 1 |
| 1N***11 | Locknut-Turbocharger; (7/16-20-Thd) | 1 |
| 1N***05 | Spacer-Thrust | 1 |
4p-6027 Cartridge Gp-Turbocharger
| 1W***95 | Plate-Identification; (Turbocharger Cartridge) | 1 |
| 2W***68 | Locknut; (M14x1.5-Thd) | 1 |
| 2W***40 | Washer-Retaining; (Impeller) | 1 |
133-0817 Cartridge Gp-Turbocharger
| 10***23 | Wheel-Compressor | 1 |
| 10***42 | Kit-Cartridge; (Turbocharger) | 0 |
| 10***81 | Plate As-Backing | 1 |
8x-0192 Exhaust Ar-Body
| 8X***92 | Exhaust Ar-Body | 1 |
| 8X***51 | Pipe Group-Exhaust; -Body Flow | 1 |
| 8X***52 | Pipe Group-Exhaust; -Rh Platform | 1 |
9y-8914 Lines Gp-Air -Turbocharger
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 16 |
100-8080 Lines Gp-Air -Inlet
| 09***19 | Plug-Pipe | 1 |
| 10***80 | Lines Group-Air; -Inlet | 1 |
| 14***44 | Elbow As | 1 |
9y-8910 Manifold Gp-Exhaust
| 11***46 | Manifold-Exhaust; (Lh Rear) | 1 |
| 11***47 | Manifold-Exhaust; (Rh Rear) | 1 |
| 11***76 | Manifold-Exhaust; (Rh Front) | 1 |
9y-8919 Muffler Ar
| 9Y***93 | Muffler Group; -Rh Turbos | 1 |
| 9Y***17 | Muffler Group; -Lh Turbos | 1 |
| 9Y***19 | Muffler Ar | 1 |
9y-8893 Muffler Gp -Rh Turbos
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 8 |
| 6V***43 | Bolt; (M10x1.5x45-mm) | 4 |
| 6V***44 | Nut - Self Locking (2nd Type) | 4 |
9y-8917 Muffler Gp -Lh Turbos
| 24***69 | Pipe-Extension | 1 |
| 2V***69 | Plate | 4 |
| 2Y***29 | Nut-Hard; (M10 X 1.5) | 3 |
8x-2851 Pipe Gp-Exhaust -Body Flow
| 09***24 | Bolt; (M12x1.75x80-mm) | 2 |
| 10***34 | Plate | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 4 |
8x-2852 Pipe Gp-Exhaust -Rh Platform
| 09***24 | Bolt; (M12x1.75x80-mm) | 2 |
| 5P***47 | Washer (Bracket To Valve Support) | 4 |
| 6G***31 | Elbow | 1 |
9y-8887 Pipe Gp-Exhaust -Lh Turbos
| 3E***52 | Washer-Hard; (8.8x20.5x2.5-mm Thk) | 8 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 4 |
| 6G***38 | Ring-Seal | 1 |
9y-8888 Pipe Gp-Exhaust -Rh Turbos
| 4P***79 | Bracket As | 1 |
| 4P***80 | Bracket As | 1 |
| 4P***81 | Strap As | 1 |
9y-8924 Support Gp-Turbocharger
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 8 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 14 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
115-0565 Support Gp-Turbocharger
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 8 |
| 11***20 | Channel | 1 |
| 11***22 | Channel | 1 |
123-6992 Support Gp-Turbocharger
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 8 |
| 11***20 | Channel | 1 |
| 11***22 | Channel | 1 |
103-0930 Support Gp-Turbocharger
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 10***30 | Support Group-Turbocharger | 1 |
| 1F***58 | Nut-Full; (1/2-13-Thd)(Air Lines) | 8 |
9y-8911 Turbocharger Gp
| 10***20 | Plate | 1 |
| 10***21 | Housing-Bypass | 1 |
| 10***22 | Coupling | 1 |
114-1980 Turbocharger Gp
| 11***80 | Turbocharger Group | 1 |
| 11***81 | Cartridge Group-Turbocharger | 1 |
| 11***86 | Cover-Compressor | 1 |
121-3850 Turbocharger Gp
| 10***81 | Cartridge Group-Turbocharger | 1 |
| 10***62 | Housing-Compressor | 1 |
| 12***51 | Housing | 1 |
128-3321 Turbocharger Gp
| 10***62 | Housing-Compressor | 1 |
| 12***21 | Turbocharger Group | 1 |
| 12***22 | Housing-Turbine | 1 |
4p-4646 Turbocharger Gp
| 2W***48 | Clamp; (Turbine Housing) | 4 |
| 4P***46 | Turbocharger Group | 1 |
| 4P***24 | Housing-Turbine | 1 |
106-4557 Turbocharger Gp
| 10***81 | Cartridge Group-Turbocharger | 1 |
| 10***57 | Turbocharger Group | 1 |
| 10***62 | Housing-Compressor | 1 |
122-0351 Turbocharger Gp
| 11***86 | Cover-Compressor | 1 |
| 12***51 | Turbocharger Group | 1 |
| 12***53 | Cartridge Group-Turbocharger; -Low Pressure | 1 |
4p-4693 Turbocharger Gp
| 2A***62 | Screw,Cap,Hexagon H Diode Pig Tail To Grd; (1/4-20x.625 In) | 4 |
| 2F***08 | Screw; (6x0.25-In)(0 X 1/4 X In) | 2 |
| 4P***93 | Turbocharger Group | 1 |
188-3580 Valve Gp-Solenoid
| 18***80 | Valve Group-Solenoid | 1 |
| 2L***66 | Terminal-Ring; (10-Ga To 12-Ga, No 10 Screw)(Small) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
109-4591 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
| 10***90 | Cartridge As | 1 |
Basic Engine
4w-7641 Adapter Gp-Flywheel Housing
| 2B***47 | Bolt (1/2" X 2 1/4") Rops Mounting Bracket To Cover Assembly | 16 |
| 4W***11 | Adapter | 1 |
| 4W***41 | Adapter Group-Flywheel Housing | 1 |
110-2751 Air Compressor Gp
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 6 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 8 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
1w-8924 Air Compressor Gp
| 1D***40 | Bolt,Machine Fuel Filter Mounting | 2 |
| 1W***24 | Air Compressor Group | 1 |
| 2S***23 | Cover As; (Governor) | 1 |
113-8193 Air Compressor Gp
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 3 |
| 11***51 | Air Compressor Group | 1 |
| 11***93 | Air Compressor Group | 1 |
2w-0582 Air Compressor Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 6 |
| 1W***30 | Pan | 1 |
9y-8898 Belt Tensioner Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
7e-5538 Camshaft Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 11***08 | Plate | 2 |
| 12***94 | Washer As-Thrust | 2 |
9y-8894 Cover Gp-Cylinder Block
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 95 |
129-9544 Cover Gp-Flywheel Housing
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 18 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
9y-8900 Cover Gp-Flywheel Housing
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 19 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
2w-0202 Cover Gp-Front Housing
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 0S***92 | Bolt--Cover To Flywheel Housing | 2 |
| 10***85 | Cover As | 1 |
101-0831 Cover Gp-Valve Mechanism
| 10***31 | Cover Group-Valve Mechanism | 1 |
| 10***97 | Cover | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
7e-8756 Cover Gp-Valve Mechanism
| 10***97 | Cover | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
| 2W***72 | Seal-O-Ring; (221.62mm Id) | 1 |
8n-0337 Crankshaft Gp
| 10***53 | Bearing-Main; (Crankshaft) | 9 |
| 10***54 | Bearing-Main; (0.63-mm Us) | 0 |
| 10***55 | Bearing-Main; (1.27-mm Us) | 0 |
106-2780 Cylinder Block As
| 10***80 | Cylinder Block As | 1 |
| 22***96 | Cap-Crankshaft Bearing | 9 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 4 |
7e-4937 Cylinder Block As
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
| 4W***14 | Adapter | 2 |
| 5P***49 | Washer (For Non-R.O.P.S. & Rollover Group) | 36 |
101-1228 Cylinder Block As
| 10***28 | Cylinder Block As | 1 |
| 11***93 | Liner-Cylinder | 16 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
101-1242 Cylinder Block As
| 10***42 | Cylinder Block As | 1 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
| 5P***49 | Washer (For Non-R.O.P.S. & Rollover Group) | 36 |
101-1173 Cylinder Block As
| 10***73 | Cylinder Block As | 1 |
| 21***26 | Liner-Cylinder Block | 16 |
| 22***96 | Cap-Crankshaft Bearing | 9 |
7c-8147 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 16 |
101-1245 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 10***42 | Cylinder Block As | 1 |
| 10***45 | Cylinder Block Group | 1 |
115-5158 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 16 |
4p-7264 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 2 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 4 |
115-5160 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 10***80 | Cylinder Block As | 1 |
| 11***60 | Cylinder Block Group | 1 |
7e-8760 Cylinder Head As
| 11***91 | Insert-Valve Seat; (Exhaust) | 2 |
| 14***45 | Insert-Valve Seat; (0.508-mm Os Od)(Inlet) | 0 |
| 14***46 | Insert-Valve Seat; (Exhaust 0.51-mm Os Od)(Exhaust) | 0 |
172-0836 Cylinder Head As
| 13***07 | Insert-Valve Seat; (Standard)(Intake) | 2 |
| 13***08 | Insert-Valve Seat; (Standard)(Exhaust) | 2 |
| 14***81 | Insert-Valve Seat; (0.51-mm Os Od)(Intake) | 0 |
131-0411 Cylinder Head As
| 13***07 | Insert-Valve Seat; (Standard)(Intake) | 2 |
| 13***08 | Insert-Valve Seat; (Standard)(Exhaust) | 2 |
| 13***11 | Cylinder Head As | 1 |
172-0838 Cylinder Head As
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 17***36 | Cylinder Head As | 1 |
7e-8758 Cylinder Head Gp
| 11***91 | Gasket-Cylinder Head | 1 |
| 5B***13 | Bolt,Machine Bonnet And Tube Mtg | 2 |
| 5B***90 | Plug-Pipe | 1 |
7e-8759 Cylinder Head Gp
| 12***39 | Valve-Exhaust | 2 |
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
125-7094 Cylinder Head Gp
| 12***39 | Valve-Exhaust | 2 |
| 12***94 | Cylinder Head Group | 1 |
| 13***13 | Guide-Valve; (Standard) | 4 |
4w-0278 Damper Gp
| 19***88 | Damper As | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 10 |
| 3B***15 | Bolt Guard Assembly To Accessory Drive Housing | 18 |
9y-4748 Damper Gp
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 10 |
| 3B***15 | Bolt Guard Assembly To Accessory Drive Housing | 18 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 18 |
105-2273 Drive Ar-Fan -Non-Variable Speed
| 10***73 | Drive Ar-Fan; -Non-Variable Speed | 1 |
| 10***07 | Drive Group-Fan; -Non-Variable Speed | 1 |
| 9Y***98 | Belt Tensioner Group | 1 |
129-2056 Drive Ar-Fan -Variable Speed
| 12***19 | Lines Group-Fan Drive; -Variable Speed | 1 |
| 12***56 | Drive Ar-Fan; -Variable Speed | 1 |
| 12***59 | Control Group-Fan; -Variable Speed | 1 |
129-2052 Drive Ar-Fan -Variable Speed
| 12***86 | Control Group-Fan; -Variable Speed | 1 |
| 12***52 | Drive Ar-Fan; -Variable Speed | 1 |
| 12***56 | Drive Ar-Fan; -Variable Speed | 1 |
105-2272 Drive Ar-Fan -Variable Speed
| 10***72 | Drive Ar-Fan; -Variable Speed | 1 |
| 10***03 | Drive Ar-Fan; -Variable Speed | 1 |
| 10***43 | Control Group-Fan; -Variable Speed | 1 |
105-4703 Drive Ar-Fan -Variable Speed
| 10***67 | Drive Group-Fan; -Variable Speed | 1 |
| 10***10 | Lines Group-Hydraulic Fan; -Variable Speed | 1 |
| 10***03 | Drive Ar-Fan; -Variable Speed | 1 |
4p-0853 Drive Gp-Accessory -Upper, Rh
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***00 | Bearing-Sleeve | 2 |
9y-1595 Drive Gp-Accessory -Pump Drive
| 10***24 | Seal As; (Lip Type) | 1 |
| 13***98 | Bearing-Sleeve | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 4 |
9y-8899 Drive Gp-Auxiliary -Rear
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 12 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
9y-8895 Drive Gp-Auxiliary -Lower, Lh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
| 1D***72 | Bolt- 13.97cm(5.5 In.)Long-Location "A" | 2 |
105-4267 Drive Gp-Fan -Variable Speed
| 10***29 | Pulley-Fan Drive | 1 |
| 10***05 | Drive Group-Fan; -Variable Speed | 1 |
| 10***38 | Adapter-Fan | 1 |
107-8707 Drive Gp-Fan -Non-Variable Speed
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
| 10***07 | Drive Group-Fan; -Non-Variable Speed | 1 |
| 1J***34 | Seal-Lip Type | 1 |
100-8105 Drive Gp-Fan -Variable Speed
| 10***05 | Drive Group-Fan; -Variable Speed | 1 |
| 10***39 | Shaft As-Fan Clutch | 1 |
| 10***41 | Retainer-Bearing | 1 |
129-2194 Drive Gp-Fan -Variable Speed
| 10***29 | Pulley-Fan Drive | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
9y-8897 Drive Gp-Fan
| 03***37 | Bolt-Self Locking; 3.81cm(1.5 In.)Long | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
133-5969 Drive Gp-Fan -Variable Speed
| 00***00 | Screw; (5/8-11x1-In) | 8 |
| 10***41 | Retainer-Bearing | 1 |
| 10***42 | Ring-Snap | 1 |
105-4268 Drive Gp-Fan
| 10***68 | Drive Group-Fan | 1 |
| 4W***27 | Kit-Bushing; (Crankshaft Pulley)(Flanged) | 1 |
| 5P***50 | Washer-Front Support Frame Assembly To | 6 |
2w-9075 Flywheel Gp
| 10***05 | Flywheel As | 1 |
| 2W***75 | Flywheel Group | 1 |
| 5P***39 | Washer-Hard; (28x42x4-mm Thk) | 2 |
8n-7174 Gear Gp-Front -Standard Rotation
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
| 12***00 | Bearing-Sleeve | 2 |
7e-6501 Gear Gp-Rear
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
| 12***50 | Bearing-Sleeve | 1 |
112-5675 Gear Gp-Rear
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 10***65 | Plate-Thrust | 1 |
| 10***68 | Washer-Thrust; (19.50 X 106 X 1.9mm Thk) | 2 |
4n-9680 Governor Gp-Air Compressor
| 2K***98 | Seal-O-Ring | 1 |
| 2S***23 | Cover As; (Governor) | 1 |
| 4N***80 | Governor Group-Air Compressor | 1 |
4p-3747 Guard Gp-Belt -Alternator
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 16***11 | Guard As; (Alternator) | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 2 |
106-7600 Housing Gp-Flywheel
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 7 |
| 10***67 | Adapter | 1 |
| 10***98 | Housing As-Flywheel | 1 |
7e-9086 Housing Gp-Flywheel
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 7 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 2 |
| 1D***74 | Bolt (L.H. Side Flywheel Housing) | 7 |
4p-5426 Housing Gp-Front -Accessory Drive
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 10***34 | Housing-Accessory Drive | 1 |
| 1B***18 | Washer; (25/64 X 5/8 X .064in Thk) | 6 |
9y-8921 Lifting Gp-Engine
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 12***26 | Clip | 1 |
| 14***07 | Strap | 6 |
7e-2324 Lifting Gp-Engine
| 11***33 | Support As; (Lh) | 1 |
| 12***28 | Support-Rh | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 3 |
9y-8922 Lines Gp-Air Compressor
| 03***69 | Elbow-Flared; (1/2-14 Nptf) | 3 |
| 06***17 | Elbow-Flared | 1 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 1 |
7e-4836 Mounting Gp-Alternator
| 05***65 | Sleeve | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 14***16 | Belt-Serpentine; (Alternator) | 1 |
119-6297 Pan Gp-Oil -Front Sump
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 11***97 | Pan Group-Oil; -Front Sump | 1 |
7e-8536 Pan Gp-Oil -Front Sump
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
6i-2861 Piston & Rod Gp
| 10***30 | Bearing-Connecting Rod; (Standard) | 1 |
| 10***31 | Bearing-Connecting Rod; (0.63-mm Us Id) | 0 |
| 10***32 | Bearing-Connecting Rod; (1.27-mm Us Id) | 0 |
7w-3813 Seal Gp-Crankshaft
| 11***32 | Seal Group-Crankshaft; (Cw Rotation) | 1 |
| 11***33 | Seal Group-Crankshaft; (Ccw Rotation) | 1 |
| 7W***13 | Seal Group-Crankshaft | 1 |
7n-7660 Drive Gp-Fan
| 5P***50 | Washer-Front Support Frame Assembly To | 6 |
| 7N***57 | Shaft-Stub | 1 |
| 7N***60 | Shaft Group-Stub; -Crankshaft Pulley | 1 |
121-5818 Step Gp
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 16 |
| 12***98 | Bracket As | 2 |
| 12***18 | Step Group | 1 |
9y-8925 Support Gp-Engine
| 13***56 | Support As | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 4 |
325-8124 Support Gp-Fan Drive
| 11***79 | Shaft-Tightener | 1 |
| 25***45 | Shaft | 1 |
| 32***23 | Bracket-Fan Drive | 1 |
7n-1863 Trunnion Gp-Engine
| 1D***66 | Bolt Bracket Assembly To Yoke | 20 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 20 |
| 5P***46 | Washer-Hard; (15.5x29x3-mm Thk) | 16 |
7e-5314 Valve Mechanism Gp
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
| 12***24 | Base As | 1 |
Braking System
8x-3377 Air Dryer Gp
| 11***35 | Valve-Check | 1 |
| 12***51 | Ring | 1 |
| 14***77 | Valve-Air Relief | 1 |
8x-0241 Brake Gp-Service & Parking -Rear
| 0S***56 | Bolt 4 1/4 In. (108 mm) --Front Support Assembly To Frame | 55 |
| 1D***24 | Bolt--19 mm (3/4 Inches) X 229 mm (9 Inches) | 12 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
8x-0222 Brake Gp-Service & Parking
| 10***04 | Housing | 1 |
| 10***06 | Anchor-Brake | 1 |
| 12***69 | Seal-Ring (517mm Id) | 1 |
8x-0225 Control Gp-Brake -Chassis
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 5 |
| 00***54 | Nipple-Pipe | 4 |
| 03***77 | Tee-Pipe | 2 |
5t-6544 Control Gp-Brake -Cab-Parking
| 4D***78 | Valve Group-Air Control; -Parking Brake Switch | 1 |
| 4H***47 | Union; - Use When Relocating Air Override Valve To R.H. Side Panel If Equipped With Attachment Parking Brake Control | 1 |
| 4S***27 | Hose Assem. (53" Long Overall) | 1 |
262-1992 Control Gp-Brake
| 26***92 | Control Group-Brake | 1 |
| 4D***78 | Valve Group-Air Control; -Parking Brake Switch | 1 |
| 4H***47 | Union; - Use When Relocating Air Override Valve To R.H. Side Panel If Equipped With Attachment Parking Brake Control | 2 |
2a-6499 Control Gp-Service Brake -Cab
| 00***33 | Tee-Pipe | 1 |
| 03***44 | Bolt-Eye; ( X) | 1 |
| 2A***99 | Control Group-Service Brake; -Cab | 1 |
257-7000 Control Gp-Service Brake
| 03***44 | Bolt-Eye; ( X) | 1 |
| 13***58 | Plate As | 1 |
| 14***01 | Setscrew | 2 |
135-6915 Control Gp-Service Brake -Cab
| 03***44 | Bolt-Eye; ( X) | 1 |
| 13***15 | Control Group-Service Brake; -Cab | 1 |
| 14***91 | Setscrew-Special | 4 |
9t-7204 Cylinder Gp-Air -Parking, Secondary Brake-Tc, Front Brake Cooling
| 2K***91 | Ring-Retaining | 1 |
| 5P***47 | Seal-Lip; (25.48 mm Od) | 1 |
| 6E***57 | Kit-Seal; (Hydraulic Cooling) | 1 |
8w-3406 Cylinder Gp-Air/Hydraulic -Front Brake
| 13***31 | Seal | 1 |
| 25***38 | Valve | 1 |
| 2F***16 | Nut (Mounted On Flywheel Housing) | 8 |
8w-3405 Cylinder Gp-Air/Hydraulic -Rear Brake
| 13***31 | Seal | 1 |
| 25***38 | Valve | 1 |
| 2F***16 | Nut (Mounted On Flywheel Housing) | 8 |
8x-7220 Cylinder Gp-Air/Hydraulic -Front Brake
| 25***38 | Valve | 1 |
| 31***27 | Kit-Brake Cylinder; (Brake) | 1 |
| 6W***05 | Expander Ring | 1 |
115-9177 Hose Gp-Air -Gauge
| 11***77 | Hose Group-Air; -Gauge-Brake Pressure | 1 |
| 3B***87 | Coupling; (Pipe) | 1 |
| 3S***15 | Tee; -- Adapter Union-- To Check Valve On Warning System Reservoir | 1 |
8x-0235 Lines Gp-Brake -Front
| 03***70 | Adapter-Pipe | 2 |
| 0S***76 | Bolt 5.08 cm(2 In.) Long | 6 |
| 12***88 | Coupling-Reducer | 1 |
8x-2833 Lines Gp-Brake -Front & Rear
| 0S***27 | Bolt -114.30 mm(4.50 In.) Long | 4 |
| 2M***80 | Seal--To Connector Pump Outlet | 10 |
| 3D***87 | Fitting; - Use When Relocating Air Override Valve To R.H. Side Panel If Equipped With Attachment Parking Brake Control | 2 |
8x-0236 Lines Gp-Brake -Rear
| 03***70 | Adapter-Pipe | 2 |
| 0S***76 | Bolt 5.08 cm(2 In.) Long | 6 |
| 10***96 | Hose As | 1 |
8w-9925 Pump & Motor Gp-Brake Release -Parking, Secondary Brake Rel
| 01***80 | Lockwasher | 8 |
| 1T***16 | Bolt; (5/16-18x0.75-In)(12 Point Hd) | 4 |
| 1V***95 | Coupling | 1 |
2a-6515 Retarder Ar-Automatic
| 2A***15 | Retarder Ar-Automatic | 1 |
| 2A***17 | Control Group-Retarder; -Automatic-Electrical | 1 |
| 2A***18 | Control Group-Retarder; -Automatic | 1 |
6g-9881 Slack Adjuster Gp -Front
| 1S***90 | Spring-Diaphragm | 2 |
| 2G***82 | Base | 1 |
| 2H***45 | Retainer,Packing Body Part Of Kit P/N 4j***80 | 2 |
5t-7670 Slack Adjuster Gp -Rear
| 1S***90 | Spring-Diaphragm | 2 |
| 24***83 | Housing | 2 |
| 2G***82 | Base | 1 |
2a-6504 Tank Gp-Air -Cab-Secondary
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***40 | Reservoir | 1 |
| 2A***04 | Tank Group-Air; -Cab-Secondary | 1 |
8x-2840 Tank Gp-Air -Primary
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 1S***01 | Union --Inversion Valve To Scraper Supply Hose; -- Inversion Valve To Scraper Supply Hose | 1 |
| 2D***10 | Union 90 Degrees (.375" Ext. Thd.) | 1 |
6e-1851 Tank Gp-Brake -Oil Reserve
| 1A***58 | Bolt 1.75 In. (44.45 mm) Long | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
3e-8978 Valve & Mounting Gp -Automatic Retarder
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***15 | Switch As-Pressure; (Auto Retarder Control) | 1 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
127-4661 Valve & Mtg Gp-Brake -Automatic Retarder
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Switch As-Pressure; (Tractor Brake) | 1 |
| 12***61 | Valve & Mtg Group-Brake; -Automatic Retarder | 1 |
217-7906 Valve & Mtg Gp-Brake
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Switch As-Pressure; (Tractor Brake) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
7d-8075 Valve Gp-Air Control
| 00***83 | Ring-Snap | 1 |
| 1S***12 | Retainer-Valve | 1 |
| 4D***89 | Valve Assem. | 1 |
4d-0487 Valve As-Check -Primary Air Tank
| 4D***87 | Valve As-Check; -Air Supply-Primary Air Tank-Service Brake Control | 1 |
4d-3278 Valve Gp-Air Control -Parking Brake
| 3H***07 | Seal-O-Ring; (21.82mm Id) | 1 |
| 4D***78 | Valve Group-Air Control; -Parking Brake Switch | 1 |
| 5D***33 | Nut-Cap | 1 |
9t-4772 Valve Gp-Brake -Parking, Secondary
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 2 |
| 06***56 | Seal-O-Ring | 1 |
| 1K***66 | Spring-Compensator | 1 |
113-1543 Valve Gp-Brake -Parking, Secondary
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 2 |
| 11***72 | Valve Group-Relief; -Parking, Secondary Brake | 1 |
| 11***43 | Valve Group-Brake; -Automatic Retarder-Park, Secondary Brake | 1 |
149-4133 Valve Gp-Brake
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 2 |
| 11***72 | Valve Group-Relief; -Parking, Secondary Brake | 1 |
| 13***86 | Kit-Seal; (Incls Ring & Seals) | 1 |
6d-3781 Valve Gp-Check -Automatic Retarder-Retarder Control
| 2R***32 | Guide-Shuttle | 1 |
| 2R***13 | Cap | 1 |
| 3D***45 | Seal-Bottle To Connector | 1 |
1u-2644 Valve Gp-Check -Parking, Secondary Brake
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 1U***44 | Valve Group-Check; -Secondary, Parking Brake | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
113-1072 Valve Gp-Relief -Parking, Secondary Brake
| 06***39 | Seal-O-Ring | 1 |
| 11***72 | Valve Group-Relief; -Parking, Secondary Brake | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
9t-4770 Valve Gp-Relief -Parking, Secondary Brake
| 06***39 | Seal-O-Ring | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3G***54 | Cap | 1 |
6e-6305 Valve Gp-Relief -Parking, Secondary Brake
| 06***39 | Seal-O-Ring | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3G***54 | Cap | 1 |
189-8666 Valve Gp-Solenoid
| 10***17 | Cartridge As | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
3e-8691 Valve Gp-Solenoid
| 10***17 | Cartridge As | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
Cooling System
9x-9482 Valve Gp-Solenoid
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
7e-6500 Connection Gp-Water
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 11***36 | Cover | 1 |
100-8007 Cooler Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 10***07 | Cooler Group-Engine Oil | 1 |
| 10***08 | Core Group-Engine Oil Cooler | 1 |
100-8008 Core Gp-Engine Oil Cooler
| 10***08 | Core Group-Engine Oil Cooler | 1 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
| 9S***85 | Plug--To Seal Hydraulic Pump To Sump Of Limit System | 1 |
9y-8890 Core Gp-Oil Cooler -Transmission
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 2 |
| 9S***91 | Plug,Machine Thread Fuel Injection Pump | 2 |
| 9Y***90 | Core Group-Oil Cooler; -Brake Cooling | 1 |
9y-8892 Core Gp-Oil Cooler -Rear Brake, Hoist-Front Brake, Tc
| 5M***14 | Pipe Plug Cylinder Block Oil Pressure | 2 |
| 9Y***92 | Core Group-Oil Cooler; -Rear Brake, Hoist-Front Brake, Tc | 1 |
7e-5835 Cover Gp-Radiator Cap -Radiator Cap
| 1M***49 | Ring (5.313" Dia.) | 1 |
| 2P***30 | Gasket Assem. | 1 |
| 2S***46 | Retainer-Gasket | 1 |
9y-8883 Fan Gp-Suction
| 10***89 | Angle As-Fan Guard | 1 |
| 10***90 | Guard As-Fan | 4 |
| 11***35 | Spider As-Fan; (Suction, 11 Blade) | 1 |
9y-8907 Lines Gp-Water -Turbocharger
| 03***85 | Connector-O-Ring | 2 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 5 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 6 |
9y-8908 Lines Gp-Water -Aftercooler
| 03***55 | Tee-Flared | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 8 |
9y-9559 Lines Gp-Water -Expansion Tank
| 3R***28 | Bracket,Angle Clamp Uoc:Bsv,Bsx | 1 |
| 4P***93 | Tube | 1 |
| 4P***94 | Tube | 1 |
9y-8889 Lines Gp-Water
| 03***92 | Spacer; (13.5x38x29-mm Thk) | 1 |
| 12***92 | Tube As | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 1 |
9y-8928 Lines Gp-Water -Bypass
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
9y-8906 Lines Gp-Water -Lower
| 00***89 | Valve As-Drain | 2 |
| 03***67 | Connector-Flared -- Adapter To Hose As. | 2 |
| 03***68 | Elbow (For Use With Shallow Pan) | 2 |
7e-6514 Lines Gp-Water -Upper
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 32 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 62 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 8 |
122-0504 Pump Gp-Auxiliary Water -Fresh Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 12***04 | Pump Group-Auxiliary Water; -Fresh Water | 1 |
| 12***45 | Seal Group-Face; (Water Pump) | 1 |
9y-8909 Pump Gp-Auxiliary Water -Fresh Water
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 12***04 | Pump Group-Auxiliary Water; -Fresh Water | 1 |
| 1H***78 | Seal-O-Ring | 1 |
9y-8916 Pump Gp-Auxiliary Water -Fresh Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 2P***96 | Retainer | 1 |
| 2W***23 | Shaft As-Pump Drive | 1 |
2w-9728 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 16***76 | Seal Group-Water Pump; (Face Type) | 1 |
| 19***21 | Kit-Gasket; (Water Pump Rebuild) | 0 |
2w-9729 Pump Gp-Water
| 1D***17 | Nut-Plate And Angle Assembly To Hydraulic And Fuel Tanks; Nut Plate And Angle Assembly To Hydraulic And Fuel Tanks | 3 |
| 1H***78 | Seal-O-Ring | 1 |
| 2W***28 | Pump Group-Water | 1 |
122-0500 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 12***50 | Seal Group-Face; (Water Pump) | 1 |
| 12***00 | Pump Group-Water | 1 |
9y-8885 Radiator Gp
| 10***22 | Baffle As-Fan | 4 |
| 14***41 | Hose As; (850 mm Long) | 1 |
| 14***42 | Hose As | 1 |
9y-8886 Radiator Gp
| 13***75 | Tank As-Center | 1 |
| 15***67 | Channel As | 1 |
| 15***71 | Channel As | 1 |
9y-8904 Housing & Regulator Gp
| 11***74 | Valve As-Vent Line | 1 |
| 14***18 | Housing As-Regulator | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
9y-8923 Housing & Regulator Gp
| 3S***43 | Seal-Lip Type; (Water Temperature Regulator) | 4 |
| 4W***00 | Gasket | 1 |
| 6I***52 | Regulator-Water Temperature; (51-Deg C) | 4 |
132-2167 Shutter Ar-Radiator
| 13***03 | Shutter Group-Radiator | 1 |
| 13***67 | Shutter Ar-Radiator | 1 |
| 13***68 | Wiring Group-Engine; -Shutter | 1 |
131-7803 Shutter Gp-Radiator
| 00***10 | Tee; (Pipe) | 2 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 11***60 | Switch As-Pressure; (A/C Compressor) | 1 |
8x-5643 Shutter Gp-Radiator
| 06***36 | Bushing-Flanged | 16 |
| 1B***03 | Nut Exhaust Pipe To Starting Engine Cylinder Block | 1 |
| 1B***30 | Nut-- Flame Arrestor Or Adapter To Pipe Assembly | 192 |
8x-2814 Shutter Gp-Radiator
| 00***10 | Tee; (Pipe) | 2 |
| 10***12 | Switch; (Air Conditioning) | 1 |
| 10***44 | Harness As; (Air Conditioning) | 1 |
9y-8918 Tank Gp-Expansion -Radiator Coolant
| 10***84 | Dial | 1 |
| 10***05 | Tank As | 1 |
| 1P***05 | Seal (Check Valve Outlet) | 1 |
6d-1039 Valve Gp-Air Control -Radiator Shutter
| 3P***59 | Spring | 1 |
| 6D***39 | Valve As; -Exhaust Bypass-Exhaust Diverter | 1 |
| 6F***72 | Seal (.674" Inside Diameter) | 1 |
Electrical And Starting System
3e-5191 Control Gp-Power Train -Transmission/Chassis
| 3E***91 | Control Group-Electronic; -Transmission/Chassis | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 5 |
9w-3352 Sensor Gp-Pressure
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***82 | Housing (Plug) (To Lift Kickout Switch) | 1 |
3e-8667 Control Gp-Electronic -Personality Module
| 11***79 | Control Group-Electronic; (Personality Module) | 1 |
| 3E***67 | Control Group-Electronic; -Personality Module | 1 |
9x-7823 Control Gp-Electronic -Steering Warning
| 10***96 | Control Group-Electronic; -Steering Warning | 1 |
| 9X***23 | Control Group-Electronic; -Steering Warning | 1 |
| 9X***11 | Film-Steering Warning | 1 |
104-4287 Control Gp-Power Train -Transmission/Chassis
| 10***87 | Control Group-Electronic; -Transmission/Chassis | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 5 |
106-2996 Control Gp-Electronic -Steering Warning
| 10***96 | Control Group-Electronic; -Steering Warning | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 3 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
125-5855 Control Gp-Electronic -Cat Monitoring System
| 12***55 | Control Group-Electronic; -Cat Monitoring System | 1 |
| 15***17 | Control Group-Monitor; -Cat Monitoring System | 1 |
7x-6399 Lamp Gp-Dome -Cab
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
7x-6398 Lamp Gp-Dome -Cab
| 4S***88 | Terminal; (Blade-Crimp Type)(Male) | 1 |
| 5P***71 | Terminal (To Flasher Unit & Turn Signal Switch) | 1 |
| 7N***43 | Lamp-Miniature; (Dome) | 1 |
9g-9813 Alarm Gp -Action-Engine Overspeed
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
9x-7803 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 4 |
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
197-8820 Alternator Gp-Charging
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***44 | Coil Assem. | 1 |
316-7251 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
239-4254 Control & Mtg Gp-Electronic
| 10***59 | Spacer; (9x20x39.2-mm Thk) | 2 |
| 13***89 | Plate Assem. | 1 |
| 14***08 | Spacer; (10x19.5x61-mm Thk) | 2 |
7e-9084 Control & Mtg Gp-Engine Elek -Ecm-Advanced
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
235-8156 Control & Mtg Gp-Monitor
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***00 | Clip; (Tab) | 2 |
255-8771 Control & Mtg Gp-Power Train
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 19***47 | Control Group-Power Train; -Transmission, Chassis | 1 |
| 1F***50 | Nut Rops Support | 2 |
8x-9640 Control & Mtg Gp-Power Train
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 10***56 | Plate As | 2 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
8x-6531 Control Gp-Air Starting -Chassis
| 10***08 | Hose As | 1 |
| 10***18 | Hose As | 1 |
| 11***90 | Valve Group-Relay; (Air Starting Motor)(Air Start) | 1 |
8x-0224 Control Gp-Air Starting -Chassis
| 10***08 | Hose As | 1 |
| 11***90 | Valve Group-Relay; (Air Starting Motor)(Air Start) | 1 |
| 11***91 | Kit-Seal | 1 |
154-9148 Control Gp-Eng Ratings Elek
| 15***48 | Control Group-Eng Ratings Elek | 1 |
| 3E***99 | Plate-Marking | 1 |
9g-9287 Control Gp-Engine Electronic -Engine Shutdown
| 1S***93 | Strap; (Cable) (0.62in Dia) | 3 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 4 |
9x-3207 Control Gp-Electronic
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 7N***81 | Housing-Receptacle; (14-Ga To 18-Ga) | 1 |
108-2843 Control Gp-Fan -Variable Speed
| 10***95 | Sensor; (Brake Oil Cooler Temp) | 1 |
| 10***12 | Switch; (Air Conditioning) | 1 |
| 10***44 | Harness As; (Air Conditioning) | 1 |
129-2059 Control Gp-Fan -Variable Speed
| 12***59 | Control Group-Fan; -Variable Speed | 1 |
| 3E***70 | Control Group-Electronic | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
106-4709 Control Gp-Fan -Variable Speed
| 10***99 | Sensor As-Liquid Level; (Jacket Water Cooler Temp) | 1 |
| 10***88 | Harness As; (Fan Control) | 1 |
| 10***09 | Control Group-Fan; -Variable Speed | 1 |
129-1986 Control Gp-Fan -Variable Speed
| 10***32 | Control Group-Electronic; (Coolant Temp Sensor) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 11***60 | Switch As-Pressure; (A/C Compressor) | 1 |
3e-3663 Control Gp-Machine -Automatic Retarder
| 10***88 | Control Group-Electronic; (Automatic Retarder) | 1 |
| 3E***63 | Control Group-Machine; -Automatic Retarder-Automatic Retarder | 1 |
| 3E***28 | Film-Instruction; (Automatic Retarder Control) | 1 |
121-2842 Control Gp-Power Train -Transmission/Chassis
| 12***42 | Control Group-Power Train; -Transmission/Chassis | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***75 | Housing-Receptacle; (Receptacle) | 1 |
3e-5390 Control Gp-Power Train -Transmission/Chassis
| 11***91 | Control Group-Power Train; -Transmission/Chassis | 1 |
| 11***88 | Film-Oht Eptc-Ii | 1 |
| 3E***90 | Control Group-Power Train; -Transmission/Chassis-Transmission, Chassis | 1 |
110-7491 Control Gp-Power Train -Transmission/Chassis
| 11***91 | Control Group-Power Train; -Transmission/Chassis | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***75 | Housing-Receptacle; (Receptacle) | 1 |
118-2452 Control Gp-Power Train -Transmisson/Chassis
| 11***52 | Control Group-Power Train; -Transmisson/Chassis | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***75 | Housing-Receptacle; (Receptacle) | 1 |
199-9850 Control Gp-Power Train -Automatic Retarder Control
| 19***50 | Control Group-Power Train; -Automatic Retarder Control-Automatic Retarder | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***73 | Housing-Receptacle; (14-Ga To 18-Ga) | 1 |
199-9847 Control Gp-Power Train
| 19***47 | Control Group-Power Train; -Transmission, Chassis | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***73 | Housing-Receptacle; (14-Ga To 18-Ga) | 1 |
128-0869 Control Gp-Traction Electronic
| 12***69 | Control Group-Traction Electronic; -Aeta | 1 |
| 12***80 | Film-Information; (Traction Control) | 1 |
| 13***38 | Control Group-Traction Electronic; (Aeta) | 1 |
160-4891 Control Gp-Unprogrammed
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 14***80 | Battery Group-Electronic Control; (Road Analysis/Vims Main Module) | 1 |
| 16***91 | Control Group-Unprogrammed; -Vims Main Module-Road Analysis Control | 1 |
6v-6702 Control Gp-Vids/Vims Main
| 11***36 | Control Group-Electronic; (Vims-Main/Display) | 1 |
| 3E***43 | Film-Module; (Vims) | 1 |
| 6V***02 | Control Group-Vids/Vims Main | 1 |
116-8903 Control Gp-Vids/Vims Main
| 11***03 | Control Group-Vids/Vims Main | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
| 3T***47 | Clip As-To Harness Connectors If 9g***54 | 1 |
3t-5438 Distributor Gp-Electronic -Transmission Speed
| 3T***38 | Distributor Group-Electronic; -Transmission Speed | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 3 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 4 |
6g-9462 Harness As-Wiring
| 5P***23 | Wire 4.55m (Br/Bk2); (1-Conn. Ether Starting System Sending Unit / 1-Conn. Solenoid Valve Ether Start System) | 0 |
| 6G***62 | Harness As | 1 |
| 7K***75 | Connector Assem. (Fuse Holder) | 6 |
8x-0118 Heater Gp-Engine Oil
| 8X***18 | Heater Group-Engine Oil | 1 |
| 9W***97 | Switch As-Temperature; (Engine Oil) | 1 |
| 9X***51 | Housing As | 1 |
8x-0193 Heater Gp-Fuel
| 06***93 | Bushing-Reducer; (1/2-14 Nptf) | 2 |
| 10***63 | Hose As | 1 |
| 11***01 | Plate | 1 |
7e-6713 Heater Gp-Jacket Water
| 6N***04 | Cap As-Dust; (Jacket Water Heater Elements) | 4 |
| 6V***50 | Seal-O-Ring; (23.47mm Id) | 1 |
| 7E***13 | Heater Group-Jacket Water | 1 |
3t-3967 Lamp Gp-Signal
| 03***35 | Lamp-Miniature | 1 |
| 3T***67 | Lamp Group; -Parking, Turn | 1 |
| 7D***13 | Lens Kit - Amber (Consists Of Lens, Gasket And Screws)> | 1 |
9x-4381 Lamp Gp-Flood -Rear-Engine Work Light
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
9x-1439 Lamp Gp-Flood -Rear-Ladder Access-Engine Work Light
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
3t-4411 Lamp Gp-Flood -Ladder Access
| 3T***11 | Lamp Group-Flood; -Hood Light-Ladder | 1 |
| 6N***87 | Lamp-Sealed Unit | 1 |
| 6T***79 | Body As-Lamp | 1 |
171-2065 Lamp Gp-Flood -Rear-Engine Work Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***72 | Body As-Lamp | 1 |
162-3294 Lamp Gp-Flood -Rear-Ladder Access-Engine Work Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
9x-7170 Lamp Gp-Head -High Beam
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
168-1953 Lamp Gp-Head -Low Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***77 | Lens As; (Headlight, Low Beam) | 1 |
171-2067 Lamp Gp-Head -High Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***49 | Lens As; (Headlight, High Beam) | 1 |
| 15***52 | Bezel | 1 |
9x-7169 Lamp Gp-Head -Low Beam
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
115-6487 Lamp Gp-Signal -Payload-Cab
| 11***87 | Lamp Group-Signal; -Payload-Cab | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 4 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 9 |
107-2282 Lamp Gp-Signal
| 10***82 | Lamp Group-Signal; -Vims Service Indicator | 1 |
| 10***83 | Lens-Blue; (Vims Service Indicator) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
6v-1119 Lamp Gp-Signal
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
| 10***54 | Body As; (Lamp) | 1 |
108-1289 Lamp Gp-Signal
| 10***89 | Lamp Group-Signal; -Stop, Tail | 1 |
| 10***91 | Body As-Lamp | 1 |
| 2P***68 | Moulding | 1 |
8t-9683 Lamp Gp-Signal
| 7D***14 | Kit (Lens) (Includes Gasket, Screw & Lens) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
6v-1108 Lamp Gp-Signal -Stop, Tail, Red
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
| 10***54 | Body As; (Lamp) | 1 |
8t-9684 Lamp Gp-Signal
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***38 | Housing-Receptacle-Sure Seal-Assemble | 1 |
8x-9330 Lighting Gp-Ladder
| 5L***41 | Spacer; (0.6-In Thk) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
8x-2832 Lighting Gp-Signal -Lh Fender
| 3T***67 | Lamp Group; -Parking, Turn | 2 |
| 5C***12 | Nut (M4x0.7 Thd) | 6 |
| 5P***06 | Hose 96.52 cm (38 In.) | 0 |
8x-2858 Lines Gp-Air Starting -Rh Platform
| 1L***66 | Elbow-External Pipe Thread | 1 |
| 30***13 | Hose As | 1 |
| 5B***60 | Bushing-Reducing | 1 |
144-7172 Module Gp-Vids/Vims Interface
| 14***72 | Module Group-Vids/Vims Interface | 1 |
| 9X***47 | Film-Identification; (Vids/Vims Interface Module) | 1 |
6v-6649 Module Gp-Vids/Vims Interface
| 14***72 | Module Group-Vids/Vims Interface | 1 |
| 6V***49 | Module Group-Vids/Vims Interface | 1 |
116-4850 Motor Gp-Prelubrication
| 03***96 | Connector; (Flared) | 1 |
| 11***50 | Motor Group-Prelubrication | 1 |
| 16***58 | Bracket As | 1 |
115-6482 Panel Gp-Circuit Breaker -Vims
| 11***82 | Panel Group-Circuit Breaker; -Vims | 1 |
| 11***40 | Harness As; (Vims)(Circuit Breaker) | 1 |
| 11***41 | Film-Instruction; (Fuse) | 1 |
2a-6491 Panel Gp-Circuit Breaker
| 11***09 | Film-Instruction; (Fuse) | 1 |
| 12***40 | Cover | 1 |
| 17***12 | Circuit Breaker As; (105-Ampere) | 1 |
115-9178 Sensor & Mounting Gp -Fuel
| 11***78 | Sensor & Mounting Group; -Fuel | 1 |
| 11***41 | Guard | 1 |
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
7e-6504 Sensor & Mounting Gp
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 10***32 | Control Group-Electronic; (Coolant Temp Sensor) | 1 |
| 10***29 | Sensor Group-Speed; -Timing-Engine Speed | 1 |
117-0053 Sensor & Mounting Gp
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 10***32 | Control Group-Electronic; (Coolant Temp Sensor) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
105-4272 Sensor & Mounting Gp -Turbocharger Inlet
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 10***72 | Sensor & Mounting Group; -Turbocharger Inlet | 1 |
| 11***00 | Sensor Group-Pressure; -Turbo Inlet, Atmospheric Air | 2 |
165-6634 Sensor Gp-Coolant Level
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***34 | Sensor Group-Coolant Level; (Water, Coolant)(Scac Expansion Tank) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
111-3794 Sensor Gp-Coolant Level
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***94 | Sensor Group-Coolant Level; -Coolant Loss-Aftercooler, Jacket Water | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
3e-7826 Sensor Gp-Exhaust Temperature
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 26***47 | Adapter | 1 |
| 26***49 | Sensor Group-Exhaust Temperature | 1 |
8w-5331 Sensor Gp-Fuel Level -Float
| 4B***26 | Screw-Machine; (1/4-28x0.625-In) | 4 |
| 5P***29 | Seal-Rectangular | 1 |
| 8W***31 | Sensor Group-Fuel Level; -Float | 1 |
124-9325 Sensor Gp-Fuel Level
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
111-2094 Sensor Gp-Fuel Level -Ultrasonic
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***94 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 3E***77 | Wedge-Receptacle Lock; (4-Pin) | 1 |
239-9957 Sensor Gp-Liquid Level
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 23***57 | Sensor Group-Liquid Level; -Coolant Loss | 1 |
118-8471 Sensor Gp-Position
| 11***71 | Sensor Group-Position; -Transmission Gear | 1 |
| 7B***42 | Bolt, Hex. Hd., 1/4in.-20 N.C. X 1 1/4in. | 2 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
219-2384 Sensor Gp-Position
| 21***84 | Sensor Group-Position; (Rotary)(Engine Speed) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
161-8906 Sensor Gp-Position
| 16***06 | Sensor Group-Position; -Accelerator Control | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
3e-5400 Sensor Gp-Position
| 11***90 | Sensor Group-Position; (Rotary Position Sensor) | 1 |
| 3E***00 | Sensor Group-Position; -Accelerator Control | 1 |
6v-5828 Sensor Gp-Position -Transmission Gear
| 6V***28 | Sensor Group-Position; Control Gp-Electronic-Actual Gear Switch | 1 |
| 7B***42 | Bolt, Hex. Hd., 1/4in.-20 N.C. X 1 1/4in. | 2 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
198-8761 Sensor Gp-Position
| 19***61 | Sensor Group-Position; (Transmission Speed) | 1 |
| 7B***42 | Bolt, Hex. Hd., 1/4in.-20 N.C. X 1 1/4in. | 2 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
126-7896 Sensor Gp-Position
| 12***96 | Sensor Group-Position; -Transmission Shift Lever | 1 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
| 8T***28 | Seal-Lip Type | 1 |
110-8190 Sensor Gp-Position -Accelerator Control
| 11***90 | Sensor Group-Position; (Rotary Position Sensor) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
124-0328 Sensor Gp-Pressure -Payload
| 12***28 | Sensor Group-Pressure; -Payload | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
110-5864 Sensor Gp-Pressure -Brake Monitor
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 11***64 | Sensor Group-Pressure; -Brake Monitor | 1 |
175-3186 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***86 | Sensor Group-Pressure; -Suspension Cylinder | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
111-8800 Sensor Gp-Pressure -Turbo Inlet, Atmospheric Air
| 11***00 | Sensor Group-Pressure; -Turbo Inlet, Atmospheric Air | 1 |
| 15***89 | Tube; (3cm) | 0 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
101-9980 Sensor Gp-Pressure -Payload Monitor
| 10***80 | Sensor Group-Pressure; -Payload Monitor | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
163-8492 Sensor Gp-Pressure -Atmospheric Air-Turbocharger Inlet
| 16***92 | Sensor Group-Pressure; -Turbocharger Inlet, Rh, Lh-Atmospheric Air | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
6v-1964 Sensor Gp-Pressure -Engine Oil
| 6V***64 | Sensor Group-Pressure; -Engine Oil | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
112-9778 Sensor Gp-Pressure
| 11***78 | Sensor Group-Pressure; -Differential Oil | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
163-8511 Sensor Gp-Pressure
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 16***11 | Sensor Group-Pressure; -Brake Monitor | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
100-4311 Sensor Gp-Pressure
| 10***11 | Sensor Group-Pressure | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
141-5746 Sensor Gp-Pressure
| 14***46 | Sensor Group-Pressure; -Air Start Lines | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
6v-1926 Sensor Gp-Pressure -Atmospheric Air
| 6V***26 | Sensor Group-Pressure; -Turbocharger Outlet-Atmospheric Air-Turbocharger Inlet | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
3t-0029 Sensor Gp-Speed -Transmission
| 14***78 | Sensor Group-Speed | 1 |
| 1B***67 | Ball Bearing | 1 |
| 2A***62 | Screw,Cap,Hexagon H Diode Pig Tail To Grd; (1/4-20x.625 In) | 4 |
102-9029 Sensor Gp-Speed -Engine Timing
| 10***29 | Sensor Group-Speed; -Timing-Engine Speed | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 3 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
126-1133 Sensor Gp-Speed
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***33 | Sensor Group-Speed; -Variable Speed | 1 |
100-3055 Sensor Gp-Temperature -Torque Converter Oil-Differential Oil-Brake Oil-Transmission Oil-Aftercooler
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
128-5662 Sensor Gp-Temperature -Differential Oil
| 12***62 | Sensor Group-Temperature; -Differential Oil | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
118-3909 Sensor Gp-Temperature -Ambient Air
| 11***09 | Sensor Group-Temperature; -Ambient Air | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
6v-1923 Sensor Gp-Temperature -Coolant
| 6V***23 | Sensor Group-Temperature; -Coolant | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
2a-6544 Starting Aid Gp-Ether
| 2A***44 | Starting Aid Group-Ether | 1 |
| 2A***89 | Plate As | 1 |
| 2A***02 | Plate As | 1 |
119-6162 Starting Aid Gp-Ether
| 11***09 | Tube | 1 |
| 11***10 | Tube | 1 |
| 11***62 | Starting Aid Group-Ether | 1 |
102-1698 Starting Ar-Air -Turbine
| 10***98 | Starting Ar-Air; -Turbine | 1 |
| 10***02 | Wiring Group-Air Starting; -Rh Platform | 1 |
| 8X***58 | Lines Group-Air Starting; -Rh Platform | 1 |
106-5468 Starting Ar-Air -Turbine
| 10***02 | Wiring Group-Air Starting; -Rh Platform | 1 |
| 10***26 | Starting Motor Group-Air; -Turbine | 1 |
| 10***68 | Starting Ar-Air; -Turbine | 1 |
102-1700 Starting Ar-Air -Vane
| 10***00 | Starting Ar-Air; -Vane | 1 |
| 10***02 | Wiring Group-Air Starting; -Rh Platform | 1 |
| 4W***34 | Starting Motor Group-Air; -Vane | 1 |
7c-3372 Starting Motor Gp-Air
| 03***17 | Washer-Spring | 2 |
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 1 |
| 11***99 | Housing-Motor | 1 |
4w-6634 Starting Motor Gp-Air -Vane
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 1 |
105-4326 Starting Motor Gp-Air -Turbine
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 10***24 | Starting Motor Group-Air; (Turbine) | 1 |
| 10***26 | Starting Motor Group-Air; -Turbine | 1 |
9y-0646 Starting Motor Gp-Air -Turbine
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 11***87 | Starting Motor Group-Air; (Turbine) | 1 |
| 12***57 | Kit-Overhaul; (Air Starting Motor) | 1 |
4w-6633 Starting Motor Gp-Air -Vane
| 03***17 | Washer-Spring | 2 |
| 11***99 | Housing-Motor | 1 |
| 1L***97 | Ring-Snap; (External) | 1 |
105-8827 Suppressor Gp-Electronic -Air Conditioner Compressor
| 10***27 | Suppressor Group-Electronic; -Air Conditioner Compressor | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
8c-5681 Switch As-Limit -Xmsn Neutralizer
| 8C***78 | Switch As-Limit | 1 |
| 8C***81 | Switch As-Limit; -Transmission Neutralizer | 1 |
| 8C***76 | Head-Switch Actuator | 1 |
9x-7781 Switch Gp-Bypass -Xmsn Charge, Lube Fill-Tc, Front Brake Cooling-Hoist Screen-Differential Oil Filter-Transmission Supply
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 4B***43 | Nut,Plain,Hexagon Plate Mtg | 2 |
| 4B***63 | Washer; (4.7x11x1.2-mm Thk) | 2 |
164-7577 Switch Gp-Bypass -Transmission Charge, Lube-Tc, Front Brake Cooling-Hoist Screen-Differential Oil Filter-Transmission Supply
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
9x-3040 Switch Gp-Flow -Coolant
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
171-8710 Switch Gp-Flow
| 17***10 | Switch Group-Flow; -Coolant | 1 |
123-2993 Switch Gp-Liquid Level -Differential Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***93 | Switch Group-Liquid Level; -Engine Oil-Ster, Fan Dr Oil (Engine On)-Torque Converter Oil-Torque Conv Oil (Low, Cold)-Front, Rear Engine Oil-Steering Oil, Engine Off-Torque Conv Oil (Low, Hot)-Auxiliary Coolant-Brake Oil, Hoist-Engine Coolant | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
110-3291 Switch Gp-Pressure -A/C Compressor
| 11***91 | Switch Group-Pressure; -A/C Compressor | 1 |
| 11***34 | Switch As-Pressure; (A/C Clutch Solenoid) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
9g-7641 Switch Gp-Start -Engine, Key-Vims Service
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
7e-8098 Thermocouple Gp
| 5N***26 | Connector; Adapter-.25in Pipe Thread | 1 |
| 6K***79 | Clip; (4.76mm Id) | 1 |
| 7E***30 | Thermocouple | 1 |
8x-7194 Wiring Gp-Heater -Cold Weather Starting
| 1S***94 | Clip-R.H. Side Engine Support | 8 |
| 4B***51 | Nut; (12x24-Thd) | 4 |
| 4K***98 | Block-Terminal | 1 |
102-1702 Wiring Gp-Air Starting -Rh Platform
| 10***02 | Wiring Group-Air Starting; -Rh Platform | 1 |
| 11***21 | Battery Group | 2 |
| 11***83 | Cable As; (Pos Battery To Neg Battery) | 1 |
125-4233 Wiring Gp-Cab -Differential Oil Filter/Vims-Vims
| 10***66 | Bezel | 1 |
| 12***33 | Wiring Group-Cab; -Differential Oil Filter/Vims-Vims | 1 |
| 12***55 | Control Group-Electronic; -Cat Monitoring System | 1 |
115-6473 Wiring Gp-Cab -Vims
| 10***11 | Sensor Group-Pressure | 1 |
| 10***58 | Film-Instruction; (Console) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
125-5839 Wiring Gp-Cab -Differential Oil Filter/Ems
| 10***66 | Bezel | 1 |
| 12***36 | Plate | 1 |
| 12***39 | Wiring Group-Cab; -Differential Oil Filter/Ems | 1 |
2a-6506 Wiring Gp-Cab -Ems
| 01***42 | Screw-Machine; (6/32x1-In) | 2 |
| 10***58 | Flasher As; (24-Volt) | 1 |
| 11***49 | Harness As-Cab; (Aeta) | 1 |
255-8769 Wiring Gp-Cab -Main Cab
| 10***58 | Flasher As; (24-Volt) | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 18 |
| 11***82 | Panel Group-Circuit Breaker; -Vims | 1 |
131-7117 Wiring Gp-Cab -Rear Axle Oil Cooler
| 12***50 | Plate As | 1 |
| 12***95 | Harness As; (Ident Code)(Rax Oil Clr/Vims) | 1 |
| 13***88 | Harness As; (Ident Code)(Rax Oil Clr/Ems) | 1 |
2a-7103 Wiring Gp-Cab -Payload/Ems
| 10***53 | Bracket As | 1 |
| 2A***03 | Wiring Group-Cab; -Payload/Ems | 1 |
| 2A***32 | Harness As; (Payload, Cab) | 1 |
306-1996 Wiring Gp-Chassis
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
7e-6505 Wiring Gp-Electronic Control
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 12 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
121-4130 Wiring Gp-Engine -Harness & Sensor
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 11 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 5 |
110-2736 Wiring Gp-Engine -Eui Vims
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 2 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
132-2168 Wiring Gp-Engine -Shutter
| 13***68 | Wiring Group-Engine; -Shutter | 1 |
| 13***29 | Harness As; (Fan Clutch) | 1 |
| 13***57 | Cover | 1 |
2a-6542 Wiring Gp-Machine -Chassis
| 03***48 | Clip; (11.11mm .437in Id) | 16 |
| 03***25 | Terminal-Ring; (For 3/8" Fastener) | 1 |
| 03***97 | Boot | 1 |
115-6478 Wiring Gp-Machine -Vims
| 03***48 | Clip; (11.11mm .437in Id) | 13 |
| 03***25 | Terminal-Ring; (For 3/8" Fastener) | 1 |
| 03***97 | Boot | 1 |
306-1993 Wiring Gp-Mirror
| 1F***50 | Nut Rops Support | 4 |
| 23***30 | Switch As-Rocker; (Heated Mirrors) | 1 |
| 23***31 | Bezel | 1 |
115-9179 Wiring Gp-Platform -Rh-Vims
| 06***45 | Clip | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***94 | Sensor Group-Coolant Level; -Coolant Loss-Aftercooler, Jacket Water | 1 |
102-1703 Wiring Gp-Platform -Rh
| 10***03 | Wiring Group-Platform; -Rh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
| 3T***48 | Clip Assembly - Housing Plug To Housing Recp. | 1 |
117-1354 Wiring Gp-Prelubrication -Engine Prelube-Cab
| 11***54 | Wiring Group-Prelubrication; -Engine Prelube-Cab | 1 |
| 11***55 | Harness As; (Engine Prelube) | 1 |
| 3T***48 | Clip Assembly - Housing Plug To Housing Recp. | 1 |
Engine Arrangement
7e-6499 Engine Ar
| 10***94 | Pump Group-Fuel Injection | 16 |
| 10***14 | Fumes Disposal Group | 1 |
| 10***07 | Cooler Group-Engine Oil | 1 |
121-5793 Engine Ar
| 10***94 | Pump Group-Fuel Injection | 16 |
| 10***14 | Fumes Disposal Group | 2 |
| 10***07 | Cooler Group-Engine Oil | 1 |
Frame And Body
8x-2868 Body & Canopy As -Heavy Duty/Heated
| 11***87 | Plate As; (Rh) | 1 |
| 11***88 | Plate As; (Lh) | 1 |
| 7X***51 | Nut-Hard; (M24 X 3.0) | 21 |
8x-2870 Body & Canopy As -Heated/Taconite
| 11***87 | Plate As; (Rh) | 1 |
| 11***88 | Plate As; (Lh) | 1 |
| 7X***51 | Nut-Hard; (M24 X 3.0) | 21 |
8x-0189 Body & Canopy As -Taconite
| 7X***51 | Nut-Hard; (M24 X 3.0) | 21 |
| 8T***74 | Bolt; (M24x3x180-mm) | 21 |
| 8T***22 | Washer-Hard-To Lock Carrier Rollers | 8 |
8x-3382 Body & Canopy As
| 7X***51 | Nut-Hard; (M24 X 3.0) | 21 |
| 8T***74 | Bolt; (M24x3x180-mm) | 21 |
| 8T***22 | Washer-Hard-To Lock Carrier Rollers | 8 |
8x-2866 Body & Canopy As -Heated
| 11***87 | Plate As; (Rh) | 1 |
| 11***88 | Plate As; (Lh) | 1 |
| 7X***51 | Nut-Hard; (M24 X 3.0) | 21 |
136-5135 Body & Canopy As-Dual Slope -Dual Slope
| 11***87 | Plate As; (Rh) | 1 |
| 11***88 | Plate As; (Lh) | 1 |
| 13***21 | Tube | 1 |
2a-6537 Cowling Gp
| 10***79 | Plate As | 1 |
| 10***80 | Plate As | 1 |
| 13***93 | Plate As | 1 |
8x-1071 Extension As-Tail
| 8X***71 | Extension As-Tail | 1 |
8x-0974 Extension As-Tail -Heavy Duty
| 8X***74 | Extension As-Tail; -Heavy Duty | 1 |
8x-4453 Fastener Gp-Handrail -Handrail
| 0T***83 | Washer--Junction Box To Rear Support | 2 |
| 2G***45 | Bracket | 2 |
| 2G***99 | Rod | 2 |
8x-0229 Fender Gp -Mud Guard
| 6V***32 | Bolt-Self Locking; (M10 X 1.5 X 25) | 48 |
| 8T***22 | Bolt-Locking; (M10x1.5x30-mm) | 21 |
| 8T***90 | Nut-Weld (M10x1.5-6h Thd) | 5 |
293-5376 Frame As
| 10***18 | Plate | 1 |
| 11***26 | Tube | 1 |
| 12***64 | Support | 1 |
293-5377 Frame As
| 29***76 | Frame As | 1 |
| 29***77 | Frame As | 1 |
2a-6538 Frame Gp
| 10***62 | Plate | 1 |
| 10***79 | Pedestal As-Rh | 1 |
| 11***44 | Plate | 4 |
290-9814 Frame Gp
| 11***55 | Support As | 1 |
| 18***87 | Bracket As | 3 |
| 24***88 | Tube As | 1 |
2a-6911 Grill-Radiator
| 2A***11 | Grill-Radiator | 1 |
2a-7249 Guard Gp-Drive Shaft
| 03***41 | Block-Adjustment | 3 |
| 1L***81 | Spacer .562 In. (14.28 mm) Thick | 3 |
| 2A***49 | Guard Group-Drive Shaft | 1 |
105-2013 Guard Gp-Hydraulic Tank
| 10***13 | Guard Group-Hydraulic Tank | 1 |
| 10***00 | Deflector | 2 |
| 10***01 | Deflector | 1 |
156-3483 Guard Gp-Power Train Filter
| 14***92 | Block | 1 |
| 15***76 | Guard As; (Rear Axle Lube Filter) | 1 |
| 15***56 | Block | 1 |
8x-2811 Handrail Gp
| 10***46 | Rail As-Cab Fr | 1 |
| 11***30 | Handrail As; (Access) | 2 |
| 11***31 | Handrail As; (Access) | 2 |
8x-0202 Hood Gp-Truck
| 10***72 | Hood As | 1 |
| 10***87 | Support As | 1 |
| 1B***02 | Nut (.3125" Diameter); Nut-- Generator Line Leads | 1 |
8x-0204 Ladder Gp -Stairway
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 14 |
| 6V***87 | Locknut; (M12x1.75-Thd) | 2 |
| 7G***39 | Spacer; (13.5x57x6-mm Thk) | 4 |
8x-4180 Latch Gp-Hood
| 0T***83 | Washer--Junction Box To Rear Support | 1 |
| 10***68 | Prop As | 1 |
| 1A***99 | Dowel | 1 |
115-5794 Liner Gp-Body -Dual Slope
| 11***94 | Liner Group-Body; -Dual Slope | 1 |
115-5795 Liner Gp-Body -Dual Slope
| 11***14 | Plate | 2 |
| 11***21 | Plate | 2 |
| 11***95 | Liner Group-Body; -Dual Slope | 1 |
8x-0195 Liner Gp-Body -Dual Slope
| 8W***58 | Plate; (Corner) | 2 |
| 8W***59 | Plate | 2 |
| 8X***95 | Liner Group-Body; -Dual Slope | 1 |
8x-0194 Liner Gp-Body -Dual Slope
| 8W***58 | Plate; (Corner) | 2 |
| 8W***59 | Plate | 2 |
| 8X***94 | Liner Group-Body; -Dual Slope | 1 |
8x-0987 Liner Gp-Extension -Tail
| 8X***22 | Plate | 1 |
| 8X***24 | Plate | 2 |
| 8X***87 | Liner Group-Extension; -Tail | 1 |
115-2109 Liner Gp-Extension -Tail
| 11***09 | Liner Group-Extension; -Tail | 1 |
| 11***27 | Plate | 2 |
| 11***28 | Plate | 1 |
8x-0207 Lines Gp-Lubrication -Central
| 10***86 | Hose As | 4 |
| 2R***39 | Clamp (3 Hole) | 18 |
| 4D***71 | Clip 25.4 cm(10 In.) Long | 6 |
8x-2846 Lubrication Gp-Automatic -Rh Platform
| 3B***62 | Nipple-Pipe | 1 |
| 4K***02 | Clip (15.88mm Id) | 1 |
| 5H***78 | Elbow-External Pipe Thread; (Extension Pipe) | 1 |
8x-2845 Lubrication Gp-Automatic -Chassis
| 00***83 | Nipple-Pipe; (Hexagon) | 4 |
| 3J***90 | Plug Adapter Turbo Oil Supply; Plug-Adapter Turbo Oil Supply | 3 |
| 4H***47 | Union; - Use When Relocating Air Override Valve To R.H. Side Panel If Equipped With Attachment Parking Brake Control | 2 |
311-7059 Mirror Gp -Heated
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 1B***93 | Bolt; (1/4-20x0.62-In) | 2 |
| 25***37 | Clip | 1 |
8x-0262 Mirror Gp-Rear View
| 13***87 | Bracket As | 1 |
| 13***89 | Block | 2 |
| 3B***05 | Pin Split Cotter | 2 |
306-1989 Mirror Gp-Rear View -Heated
| 30***89 | Mirror Group-Rear View; -Heated | 1 |
| 30***93 | Wiring Group-Mirror | 1 |
| 30***96 | Wiring Group-Chassis | 1 |
8x-2808 Mounting Gp-Suspension -Front
| 11***35 | Plate | 16 |
| 14***99 | Washer-Hard; (39x66x6-mm Thk) | 12 |
| 19***71 | Washer-Hard; (26x47x12-mm Thk) | 8 |
8x-2813 Mounting Gp-Truck Body -Dual Slope
| 2A***63 | Bracket | 1 |
| 2B***74 | Pin-Clevis | 1 |
| 3B***15 | Pin,Cotter Governor And Decelerator Control | 4 |
5t-7800 Pump Gp-Lubrication -Platform, Rh
| 00***10 | Tee; (Pipe) | 1 |
| 03***46 | Elbow | 1 |
| 10***51 | Bracket | 1 |
8w-4594 Pump Gp-Lubrication -Platform, Rh
| 5T***00 | Pump Group-Lubrication; -Automatic Lubrication | 1 |
| 8W***94 | Pump Group-Lubrication; -Automatic Lubrication | 1 |
8x-9130 Sideboard As-Body
| 8X***30 | Sideboard As-Body | 1 |
| 8X***33 | Rail | 2 |
9y-8896 Step Gp
| 4P***22 | Step As | 2 |
| 4P***28 | Retainer | 4 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 32 |
9t-8910 Suspension Gp-Front
| 10***01 | Gland | 1 |
| 10***50 | Housing As | 1 |
| 17***07 | Plate | 1 |
8x-2793 Suspension Gp-Rear
| 03***67 | Ring; (Back Up) | 2 |
| 03***39 | Seal-O-Ring (Id=9.25mm) | 2 |
| 10***22 | Suspension Group-Rear | 2 |
6e-1101 Suspension Gp-Rear
| 10***04 | Head | 1 |
| 17***85 | Core-Valve | 1 |
| 1A***05 | Bolt (5 In. Long); (5/8-11x5-In) | 4 |
106-3722 Suspension Gp-Rear
| 10***22 | Suspension Group-Rear | 1 |
| 18***97 | Bearing | 2 |
| 19***20 | Ring-Wear | 1 |
2a-6541 Tread Gp-Non-Skid -Chassis
| 10***56 | Tread | 1 |
| 2A***41 | Tread Group-Nonskid; -Chassis | 1 |
| 2A***79 | Plate | 2 |
2a-6547 Tread Gp-Non-Skid -Rh Platform
| 20***40 | Tread | 5 |
| 2A***47 | Tread Group-Nonskid; -Rh Platform | 1 |
| 2A***79 | Plate | 1 |
8w-2597 Valve Gp-Lube Distribution -4-Injector
| 19***54 | Packing | 4 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 4 |
| 8W***55 | Kit-Injector; (Lube Valve) | 1 |
5t-5009 Valve Gp-Lube Distribution -3-Injector
| 19***54 | Packing | 1 |
| 5T***09 | Valve Group-Lube Distribution; -3-Injector-Steering Cyl, Linkage, Rh, Lh-Hoist, Rear Susp Cyl, Rh, Lh-Front Susp, Steer Cyl, Rh, Lh | 1 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 3 |
5t-5010 Valve Gp-Lube Distribution -5 Injector
| 19***54 | Packing | 5 |
| 5T***10 | Valve Group-Lube Distribution; -5-Injector | 1 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 5 |
8x-0223 Walkway Gp
| 10***45 | Catwalk As-Side | 1 |
| 10***31 | Bracket As | 1 |
| 2H***55 | Bolt--R.H. Front Rops Leg To Support Assembly | 16 |
8x-2837 Walkway Gp -Ladder
| 11***38 | Platform As | 2 |
| 11***43 | Support-Step; (Rubber) | 4 |
| 11***44 | Plate | 4 |
Fuel System
7w-5397 Drive Gp-Tachometer
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 8 |
8x-2570 Fastener Gp-Fuel Tank
| 6V***88 | Nut-Self Locking; (M20x2.50 Thd) | 2 |
| 7X***89 | Bolt; (M24x3x100-mm) | 4 |
| 8T***61 | Washer-Strap Assembly To Core Assembly | 5 |
115-7665 Mounting Gp-Fuel Tank
| 11***64 | Plate As | 1 |
| 11***65 | Fastener Group-Fuel Tank | 1 |
| 6V***88 | Nut-Self Locking; (M20x2.50 Thd) | 4 |
6i-4469 Filter Gp-Fuel
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 5 |
7e-6719 Filter Gp-Primary Fuel
| 1L***69 | Ring-Retaining | 1 |
| 2H***29 | Ring - Retaining External | 1 |
| 2J***57 | Packing,Preformed Screw Assembly Part Of Kit P/N 5r***25 | 1 |
100-6746 Injector Gp-Fuel
| 10***46 | Injector Group-Fuel | 1 |
| 8J***25 | Seal-O-Ring | 1 |
| 9X***35 | Seal-O-Ring | 1 |
8x-0206 Lines Gp-Fuel
| 6D***41 | Clip-To Harness Routed Along Lh Side | 8 |
| 6V***46 | Seal-O-Ring | 2 |
| 7J***08 | Seal-To Transmission Cooler Ports | 2 |
8x-4546 Lines Gp-Fuel Filter
| 11***39 | Hose As | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 4 |
7e-6503 Lines Gp-Fuel Injection
| 00***81 | Tee-Union; (Flared 37-Deg) | 1 |
| 03***49 | Elbow; (90 Degree, 37 Degree Flared) | 3 |
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
100-5794 Pump Gp-Fuel Injection
| 10***94 | Pump Group-Fuel Injection | 1 |
| 10***46 | Injector Group-Fuel | 1 |
| 7C***15 | Plug | 1 |
8n-7763 Pump Gp-Fuel Priming
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 1 |
| 1H***71 | Seal 20.22 mm(.796 In.)I. D. | 1 |
| 2W***05 | Pump As-Fuel Priming | 1 |
1n-4478 Pump Gp-Fuel Transfer
| 11***96 | Seal-Lip; (Outer) | 1 |
| 11***97 | Seal-Lip; (Inner) | 1 |
| 12***37 | Shaft As-Drive | 1 |
8n-6151 Pump Gp-Fuel Transfer
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
| 1N***78 | Pump Group-Fuel Transfer; (1-Section Gear) | 1 |
| 1N***36 | Coupling-Drive | 1 |
8x-4545 Tank & Filter Ar-Fuel
| 11***38 | Tank Group-Fuel | 1 |
| 8X***67 | Tank Group-Fuel | 1 |
| 8X***70 | Fastener Group-Fuel Tank | 1 |
131-7953 Tank & Filter Ar-Fuel
| 11***78 | Sensor & Mounting Group; -Fuel | 1 |
| 13***53 | Tank & Filter Ar-Fuel | 1 |
| 13***55 | Tank Group-Fuel | 1 |
115-8148 Tank & Filter Ar-Fuel
| 11***65 | Fastener Group-Fuel Tank | 1 |
| 11***67 | Tank Group-Fuel | 1 |
| 11***48 | Tank & Filter Ar-Fuel | 1 |
131-7954 Tank & Filter Ar-Fuel
| 11***65 | Fastener Group-Fuel Tank | 1 |
| 11***78 | Sensor & Mounting Group; -Fuel | 1 |
| 13***54 | Tank & Filter Ar-Fuel | 1 |
8x-0267 Tank Gp-Fuel
| 03***27 | Hose As | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
| 2G***44 | Gauge Group-Fuel Level; (Tank) | 1 |
131-7956 Tank Gp-Fuel
| 10***81 | Block | 1 |
| 11***41 | Plate | 1 |
| 13***56 | Tank Group-Fuel | 1 |
113-9338 Tank Gp-Fuel
| 03***27 | Hose As | 1 |
| 11***38 | Tank Group-Fuel | 1 |
| 11***40 | Tank As | 1 |
131-7955 Tank Gp-Fuel
| 10***81 | Block | 1 |
| 11***41 | Plate | 1 |
| 13***55 | Tank Group-Fuel | 1 |
115-7667 Tank Gp-Fuel
| 03***27 | Hose As | 1 |
| 11***41 | Plate | 1 |
| 11***66 | Tank As | 1 |
2g-9000 Valve As-Tank -Fast Fill Fuel
| 2G***00 | Valve As-Tank | 1 |
Hydraulic System
9t-8911 Cylinder Gp-Hoist
| 10***52 | Rod As | 1 |
| 11***36 | Ring-Backup | 1 |
| 17***79 | Bolt-Hex Head; (M24x3.0x80mm) | 12 |
2a-6546 Drive Gp-Pump
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 16 |
| 13***97 | Seal-Lip Type | 1 |
| 1H***74 | Dowel (.5" Long) | 2 |
8x-0232 Lines Gp-Hoist
| 11***34 | Valve Group-Control; -Hoist | 1 |
| 1P***79 | Flange (Half) | 6 |
| 1P***82 | Flange-Half | 10 |
105-4310 Lines Gp-Hydraulic Fan -Variable Speed
| 03***33 | Seal-O-Ring; (12.42mm Id) | 4 |
| 06***38 | Seal-O-Ring; (7.65 mm Id) | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
125-6725 Lines Gp-Hydraulic Oil Cooler -Rear Coolers
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
| 10***78 | Elbow | 2 |
| 10***42 | Hose As | 1 |
8x-0234 Lines Gp-Hydraulic Oil Cooler -Tc & Brakes
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 10***88 | Valve Group-Diverter; -Tc, Front Brake Cooling | 1 |
8x-2834 Lines Gp-Hydraulic Oil Cooler -Brake Cooling
| 00***52 | Seal-O-Ring | 4 |
| 1P***82 | Flange-Half | 8 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 8 |
6e-2308 Manifold Gp-Hydraulic -Hoist
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4J***33 | Seal Fuel Injection Pump | 1 |
| 6E***29 | Manifold | 1 |
8x-3380 Mounting Gp-Cylinder
| 23***17 | Pin As | 2 |
| 29***68 | Fitting | 2 |
| 29***69 | Cap-Dust | 2 |
8x-0263 Mounting Gp-Hydraulic Tank
| 6P***69 | Back Up Washer | 1 |
| 6V***88 | Nut-Self Locking; (M20x2.50 Thd) | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 1 |
9g-9904 Pump Gp-Gear -Xmsn Charging, Scavenge, Lube
| 10***32 | Gear-Oil Pump; (8 Teeth) | 1 |
| 1B***36 | Key-Woodruff | 2 |
| 1H***74 | Dowel (.5" Long) | 2 |
6y-5791 Pump Gp-Gear -Tc, Parking Brk Rel, Brk Clg
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 9 |
| 1B***14 | Key-Woodruff | 1 |
9g-9905 Pump Gp-Gear -Supplemental Brake Cooling-Xmsn Charging, Scavenge, Lube
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 1S***74 | Seal-O-Ring | 2 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 4 |
103-4892 Pump Gp-Gear -Hoist, Rear Brake Cooling
| 08***93 | Ring-Retaining | 1 |
| 10***92 | Pump Group-Gear; -Hoist, Rear Brake Cooling | 1 |
| 3E***24 | Stud | 8 |
8e-0604 Pump Gp-Gear -Tc, Parking Brake Release
| 2B***73 | Key-Woodruff | 2 |
| 2D***09 | Seal--To Cover & Plate Bearing Retainers | 4 |
| 3P***47 | Gear-Oil Pump; (12-Teeth) | 2 |
8x-4902 Pump Gp-Gear -Hoist, Rear Brake Cooling
| 10***91 | Pump Group-Gear; -Hoist, Rear Brake Cooling | 1 |
| 5F***99 | Packing,Preformed Cover Mtg; Part Of Kit P/N 5r***25 Part Of Kit P/N 8s***57 | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 2 |
103-4891 Pump Gp-Gear -Hoist, Rear Brake Cooling
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
| 10***91 | Pump Group-Gear; -Hoist, Rear Brake Cooling | 1 |
8x-0275 Pump Gp-Gear -Hoist, Rear Brake Cooling
| 10***92 | Pump Group-Gear; -Hoist, Rear Brake Cooling | 1 |
| 3D***90 | Stud-Taperlock; (1/2x13x1.97 In Oal) | 4 |
| 5F***99 | Packing,Preformed Cover Mtg; Part Of Kit P/N 5r***25 Part Of Kit P/N 8s***57 | 1 |
8e-0605 Pump Gp-Gear -Supplemental Brake Cooling
| 10***33 | Gear-Oil Pump; (8 Teeth) | 1 |
| 1M***80 | Bearing; (25.413 mm Od) | 2 |
| 2D***09 | Seal--To Cover & Plate Bearing Retainers | 1 |
6y-5792 Pump Gp-Gear -Brake Cooling
| 1M***36 | Dowel | 2 |
| 2D***09 | Seal--To Cover & Plate Bearing Retainers | 1 |
| 3T***06 | Cover As-Oil Pump | 1 |
9t-8929 Pump Gp-Piston -Steering
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
120-0576 Pump Gp-Piston -Steering
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
6e-6627 Pump Gp-Piston -Steering
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 2 |
6e-4216 Rotating Gp-Pump -Steering
| 6E***16 | Rotating Group-Pump; -Implement, Steering | 1 |
| 6E***17 | Plate-Limiter | 2 |
| 6E***18 | Plate-Spacer | 2 |
6e-2143 Screen Gp -Tc, Front Brake Cooling
| 2J***56 | Ring-Retaining | 1 |
| 2S***39 | Seal-O-Ring | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
5t-1033 Shaft Gp-Pump Drive
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 8 |
| 2K***71 | Locknut; (1-14-Thd) | 1 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 8 |
9t-8921 Tank Gp-Hydraulic & Xmsn
| 10***03 | Gauge-Sight; (Hydraulic Oil Level) | 3 |
| 1N***98 | Plug; (Clutch/Brake Models Only) | 1 |
| 1U***27 | Guide-Valve | 2 |
8x-8014 Universal Joint Gp-Pump Drive
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 8 |
| 10***87 | Spider And Bearing | 2 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 8 |
6e-4518 Valve Gp -Hoist Pilot
| 1G***28 | Kit-Plunger Seal; (Includes Part Marked J) | 1 |
| 5P***56 | Seal-O-Ring | 1 |
| 6E***63 | Retainer | 1 |
6e-0732 Valve Gp-Pilot Cartridge -Hoist
| 03***28 | Seal-O-Ring | 1 |
| 1G***27 | Kit-Seal; (Metering Capsule)(Includes Seals & Rings) | 1 |
| 6E***32 | Valve Group; -Pilot Cartridge | 1 |
9j-8225 Valve Gp-Relief -Brake Cooling
| 1J***97 | Valve; (Push-Pull) | 1 |
| 6J***28 | Seat-Pilot | 1 |
| 9J***25 | Valve Group; -Brake Cooling | 1 |
111-5832 Valve Gp -Brake Cooling
| 11***93 | Seat | 1 |
| 11***32 | Valve Group; -Brake Cooling | 1 |
| 1J***97 | Valve; (Push-Pull) | 1 |
111-5834 Valve Gp-Control -Hoist
| 10***26 | Screen As; (Hoist) | 1 |
| 10***45 | Plug-Orifice | 3 |
| 11***34 | Valve Group-Control; -Hoist | 1 |
6e-6318 Valve Gp-Control -Hoist
| 10***26 | Screen As; (Hoist) | 1 |
| 10***45 | Plug-Orifice | 3 |
| 1H***28 | Seal 6.3 cm(2.484 In.) I.D.; Seal--To Seal Pumps To Case | 2 |
105-0188 Valve Gp-Diverter -Tc, Front Brake Cooling
| 06***56 | Seal-O-Ring | 1 |
| 10***75 | Spring | 1 |
| 10***88 | Valve Group-Diverter; -Tc, Front Brake Cooling | 1 |
6e-1037 Valve Gp-Diverter -Tc, Front Brake Cooling
| 06***56 | Seal-O-Ring | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
| 6E***37 | Valve Group-Diverter; -Tc, Front Brake Cooling | 1 |
120-5315 Valve Gp-Pilot -Accum Charging-Cut Off
| 00***92 | Seal-O-Ring | 1 |
| 12***15 | Valve Group-Pilot; -Accum Charging-Cut Off | 1 |
| 12***17 | Adjuster As | 1 |
120-5316 Valve Gp-Pilot -Accum Charging Cut-In
| 03***41 | Seal-O-Ring | 1 |
| 12***08 | Plug-Piston | 1 |
| 12***09 | Plug-Stop | 1 |
6e-1068 Valve Gp-Pilot -Hoist
| 03***95 | Screw-Flat Head; (1/4-20x4.09mm) | 2 |
| 10***72 | Boot | 1 |
| 10***73 | Clamp-Boot | 1 |
6e-4238 Valve Gp-Pump Control -Steering
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
120-0575 Valve Gp-Pump Control -Steering
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 12***75 | Valve Group-Pump Control; (Pressure, Flow Compensator)(Steering) | 1 |
6e-5855 Valve Gp-Relief -Tc, Hoist, Rear Brake Cooler
| 6E***55 | Valve Group-Relief; -Tc, Hoist, Rear Brake Cooler | 1 |
| 6J***80 | Spring | 1 |
| 6K***07 | Seal-O-Ring; (43.69mm Id) | 1 |
9t-8924 Valve Gp-Relief -Pilot Operated Hoist
| 10***02 | Stop | 1 |
| 1H***28 | Seal 6.3 cm(2.484 In.) I.D.; Seal--To Seal Pumps To Case | 1 |
| 1U***22 | Bearing-Sleeve; (12.65mm Id) | 1 |
121-8800 Valve Gp-Relief -Brake Cooling
| 10***02 | Stop | 1 |
| 11***92 | Cover | 1 |
| 11***32 | Valve Group; -Brake Cooling | 1 |
111-5835 Valve Gp-Relief -Brake Cooling
| 10***02 | Stop | 1 |
| 11***92 | Cover | 1 |
| 11***32 | Valve Group; -Brake Cooling | 1 |
Lubrication System
1n-3262 Extension Gp-Drain -Engine Oil
| 00***43 | Elbow | 1 |
| 1N***62 | Extension Group-Drain; -Engine Oil | 1 |
| 3B***55 | Elbow | 1 |
101-0838 Breather Gp -Crankcase
| 03***31 | Seal-O-Ring | 2 |
| 10***38 | Breather Group; -Crankcase | 1 |
| 10***99 | Cover As | 2 |
7e-9082 Breather Gp -Crankcase
| 03***31 | Seal-O-Ring | 2 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 8 |
| 2W***72 | Seal-O-Ring; (221.62mm Id) | 2 |
124-5513 Breather Gp -Crankcase
| 03***31 | Seal-O-Ring | 4 |
| 10***99 | Cover As | 4 |
| 12***13 | Breather Group; -Crankcase | 1 |
119-6329 Filler Gp-Engine Oil
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 5 |
| 11***24 | Tube As | 1 |
2w-3701 Filler Gp-Engine Oil
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 11***24 | Tube As | 1 |
| 13***46 | Cap As-Engine Oil Filler | 1 |
123-6884 Filter Gp-Engine Oil
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 26 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 20 |
9y-8901 Filter Gp-Engine Oil
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 26 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 20 |
100-6014 Fumes Disposal Gp
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
| 10***14 | Fumes Disposal Group | 1 |
7c-6102 Gauge Gp-Oil Level (Dipstick)
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 10***90 | Gauge As-Oil Level (Dipstick) | 1 |
| 4F***65 | Gasket-Shaft | 1 |
9y-8902 Lines Gp-Engine Oil
| 06***56 | Seal-O-Ring | 4 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
123-6919 Lines Gp-Fan Drive -Variable Speed
| 03***33 | Seal-O-Ring; (12.42mm Id) | 2 |
| 06***38 | Seal-O-Ring; (7.65 mm Id) | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
117-0447 Lines Gp-Prelubrication
| 03***11 | Terminal-Ring; (2-Ga, 5/16-In Screw) | 1 |
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 09***04 | Terminal-Ring; (2-Ga, 3/8-In Screw) | 1 |
9y-8903 Lines Gp-Turbocharger Oil
| 06***39 | Seal-O-Ring | 2 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 16 |
135-8770 Manifold Gp-Control -Fan Drive-Variable Speed
| 13***70 | Manifold Group-Control; -Fan Drive-Variable Speed | 1 |
| 13***71 | Valve Group-Solenoid | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 3 |
8x-0191 Oil Change Gp-High Speed
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 2 |
| 2M***89 | Gasket | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 2 |
116-7153 Pump & Motor Gp-Prelubrication
| 11***53 | Pump & Motor Group-Prelubrication | 1 |
| 15***58 | Connector | 1 |
| 15***59 | Connector | 1 |
8n-6152 Pump Gp-Engine Oil -2-Section Gear
| 29***87 | Seal-O-Ring | 1 |
| 4P***38 | Pump Group-Engine Oil; -2-Section Gear | 1 |
| 4S***82 | Bolt 7.25 In. (18.42 cm) Long | 3 |
106-9872 Pump Gp-Engine Oil -2-Section Gear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 9 |
| 10***67 | Shaft As-Idler; (12-Teeth) | 2 |
106-9873 Pump Gp-Engine Oil -2-Section Gear
| 10***72 | Pump Group-Engine Oil; -2-Section Gear | 1 |
| 10***73 | Pump Group-Engine Oil; -2-Section Gear | 1 |
| 1B***73 | Bolt 8.50 In.(215.90 mm) Long | 3 |
4p-5638 Pump Gp-Engine Oil -2-Section Gear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 9 |
| 11***49 | Gasket | 1 |
144-8267 Pump Gp-Scavenge -Front Sump
| 05***79 | Washer; (13.5x44.45x10-mm Thk) | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
8n-2012 Pump Gp-Scavenge -Front Sump
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
1w-8508 Pump Gp-Scavenge -Front Sump
| 05***79 | Washer; (13.5x44.45x10-mm Thk) | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
124-2725 Valve & Mtg Gp-Fan Drive -Variable Speed
| 12***25 | Valve & Mtg Group-Fan Drive; -Variable Speed | 1 |
| 12***97 | Valve Group-Solenoid | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 3 |
135-8771 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***03 | Kit-Seal; (Modulating Valve) | 1 |
| 12***74 | Spacer-Special; (16.5x34.42x11.5-mm Thk) | 1 |
124-3497 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
| 11***03 | Kit-Seal; (Modulating Valve) | 1 |
Machine Arrangement
125-9283 Chassis Ar -European Market
| 12***41 | Tank-Air | 1 |
| 12***83 | Chassis Ar; -European Market | 1 |
125-6238 Machine Ar -European Market
| 12***38 | Machine Ar; -European Market | 1 |
| 12***83 | Chassis Ar; -European Market | 1 |
Operator Station
249-2969 Adjuster Gp-Seat
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
173-1028 Adjuster Gp-Seat
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
2a-6502 Air Conditioner & Mounting Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 10***46 | Air Conditioner Group | 1 |
| 1B***04 | Nut-Full | 1 |
3e-7711 Air Conditioner Gp
| 1M***30 | Nut And Lock Assem.; (No. 10-32) | 4 |
| 2G***15 | Bracket | 2 |
| 2L***17 | Screw-Machine; (10-32x7.9-mm) | 2 |
108-4546 Air Conditioner Gp
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 1 |
| 10***46 | Air Conditioner Group | 1 |
| 11***35 | Case As | 1 |
169-5423 Armrest Gp -Rh
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 15***51 | Bracket | 1 |
8y-5904 Armrest Gp
| 3E***12 | Nut-Square; (3/8-16-Thd) | 1 |
| 6V***87 | Screw-Pan Head; (10-24x1-In) | 4 |
| 8S***03 | Ring-Retaining | 1 |
257-2728 Cab Ar
| 11***64 | Panel Group-Instrument; -Keypad, Speedometer, Tach | 1 |
| 11***87 | Lamp Group-Signal; -Payload-Cab | 1 |
| 11***49 | Harness As-Cab; (Retarder Control) | 1 |
2a-6525 Cab Ar -Ems
| 11***49 | Harness As-Cab; (Retarder Control) | 1 |
| 11***77 | Hose Group-Air; -Gauge-Brake Pressure | 1 |
| 11***91 | Harness As-Wiring; (789b)(Arc) | 1 |
135-9986 Cab Ar
| 11***55 | Cab Group; -Vims | 1 |
| 11***64 | Panel Group-Instrument; -Keypad, Speedometer, Tach | 1 |
| 11***73 | Wiring Group-Cab; -Vims | 1 |
114-9460 Cab Ar -Vims
| 11***55 | Cab Group; -Vims | 1 |
| 11***60 | Cab Ar; -Vims | 1 |
| 11***64 | Panel Group-Instrument; -Keypad, Speedometer, Tach | 1 |
2a-6501 Cab Gp -Ems
| 10***14 | Cab As | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 3 |
| 1V***45 | Grommet | 2 |
114-9455 Cab Gp -Vims
| 10***01 | Cover; (Lh) | 2 |
| 10***38 | Dash As | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 80 |
255-8767 Cab Gp
| 25***67 | Cab Group | 1 |
| 26***83 | Panel As-Cab | 1 |
| 26***84 | Panel As-Cab; (Lh) | 1 |
256-2442 Cab Gp
| 1H***44 | Lockwasher (Bracket To Cab) | 3 |
| 1V***45 | Grommet | 2 |
| 1V***46 | Ring-Snap | 2 |
255-8766 Cab Gp
| 11***58 | Washer; (6.5x17x1-mm Thk) | 73 |
| 12***04 | Plate | 1 |
| 14***69 | Washer; (7.5x40x3-mm Thk) | 5 |
2a-6498 Cab Gp -Ems
| 10***01 | Cover; (Lh) | 2 |
| 11***93 | Dash As | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 80 |
114-9458 Cab Gp -Vims
| 09***37 | Spacer; (12-mm Thk) | 7 |
| 11***58 | Cab Group; -Vims | 1 |
| 11***59 | Cab As | 1 |
7n-4297 Compressor Gp-Refrigerant
| 01***11 | Screw; (10-16x0.25-In) | 3 |
| 14***97 | Valve As-Relief; (Refrigerant Compressor) | 1 |
| 1H***71 | Seal 20.22 mm(.796 In.)I. D. | 2 |
3e-3768 Compressor Gp-Refrigerant
| 01***11 | Screw; (10-16x0.25-In) | 3 |
| 14***97 | Valve As-Relief; (Refrigerant Compressor) | 1 |
| 1P***56 | Plate | 1 |
2w-0216 Compressor Gp-Refrigerant
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
9y-8891 Condenser & Mtg Gp-Refrigerant
| 5M***62 | Bolt; (3/8-16x0.75-In) | 8 |
| 6N***84 | Grommet Assem. | 4 |
| 7E***60 | Tube As | 1 |
255-8770 Console Gp-Operator
| 11***58 | Washer; (6.5x17x1-mm Thk) | 15 |
| 12***65 | Knob; (Black Plastic) | 1 |
| 12***96 | Sensor Group-Position; -Transmission Shift Lever | 1 |
257-6990 Control Gp-Hoist
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 1B***06 | Key-Woodruff | 2 |
| 1F***31 | Collar | 1 |
5t-6716 Control Gp-Hoist -Cab
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 10***72 | Lever; (Bed Control) | 1 |
| 1B***06 | Key-Woodruff | 2 |
8x-0227 Control Gp-Hoist -Chassis
| 1A***15 | Washer- 1.6 mm(.065 In.)Thick | 1 |
| 1A***52 | Clevis,Rod End Governor And Decelerator Control | 1 |
| 1B***76 | Pin,Straight,Headed Governor And Decelerator Control | 1 |
158-8717 Control Gp-Monitor -Cat Monitoring System
| 15***17 | Control Group-Monitor; -Cat Monitoring System | 1 |
9x-6847 Display Gp-Payload Monitor -Operator Display
| 8C***81 | Film-Instruction; (Payload Measurement) | 1 |
| 9X***08 | Control Group-Payload Electronic; -Operator Display | 1 |
| 9X***47 | Control Group-Payload Electronic; -Operator Display | 1 |
9x-6846 Control Gp-Monitor -Payload
| 10***85 | Battery; (Lithium)(Internal Backup) | 1 |
| 18***78 | Control Group-Payload Electronic | 1 |
| 8C***78 | Seal-O-Ring | 1 |
9x-5308 Display Gp-Payload Monitor -Operator Display
| 5P***66 | Terminal-Ring; (18-Ga To 22-Ga, No. 6 Screw) | 6 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 4 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 4 |
2a-6518 Control Gp-Retarder -Automatic
| 2A***18 | Control Group-Retarder; -Automatic | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
| 3E***78 | Valve & Mounting Group; -Automatic Retarder-Retarder Control | 1 |
135-6568 Control Gp-Retarder -Automatic
| 00***33 | Tee-Pipe | 1 |
| 12***61 | Valve & Mtg Group-Brake; -Automatic Retarder | 1 |
| 13***68 | Control Group-Retarder; -Automatic-Hydraulic | 1 |
2a-6517 Control Gp-Retarder -Automatic
| 12***16 | Harness As-Cab; (Arc-Cab) | 1 |
| 2A***17 | Control Group-Retarder; -Automatic-Electrical | 1 |
| 2A***21 | Plate | 1 |
127-4765 Control Gp-Retarder -Automatic
| 12***61 | Valve & Mtg Group-Brake; -Automatic Retarder | 1 |
| 12***65 | Control Group-Retarder; -Automatic | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
5t-6545 Control Gp-Transmission
| 12***96 | Sensor Group-Position; -Transmission Shift Lever | 1 |
| 3L***40 | Bolt-Hex Socket Head; (10-24x.750in) | 2 |
| 4J***33 | Seal Fuel Injection Pump | 4 |
165-8682 Control Gp-Unprgmed Monitor -Vids/Vims Main Module
| 10***85 | Battery; (Lithium)(Internal Backup) | 1 |
| 13***20 | Film-Identification; (Vids, Vims Main Module) | 1 |
| 16***82 | Control Group-Unprgmed Monitor; -Vids/Vims Main Module | 1 |
226-8720 Cover Gp-Seat Belt
| 22***85 | Cover-Front | 1 |
| 22***86 | Cover As; (Rear) | 1 |
| 22***20 | Cover Group-Seat Belt | 1 |
251-6755 Door Gp-Cab
| 11***58 | Washer; (6.5x17x1-mm Thk) | 9 |
| 12***65 | Knob; (Black Plastic) | 1 |
| 12***73 | Handle As-Pull | 1 |
8x-8090 Door Gp-Cab -Lh
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 4 |
| 10***87 | Escutcheon | 1 |
8w-4170 Door Gp-Cab -Rh
| 12***65 | Handle As; (Rh Door)(Outside) | 1 |
| 17***94 | Seal; (418-cm) | 0 |
| 2G***29 | Hinge | 1 |
251-2466 Door Gp-Cab
| 03***29 | Bolt; (1/4-20x0.347-In) | 11 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 10***88 | Glass As-Window | 1 |
5t-6163 Door Gp-Cab -Lh
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 6 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 4 |
2a-6775 Drive Gp-Tachograph -Chassis
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 2A***75 | Drive Group-Tachograph; -Chassis | 1 |
| 5K***94 | Clip (12.7mm Id) | 1 |
8y-5874 Extension Gp-Backrest -Cloth
| 8Y***74 | Extension Group-Backrest; Backrest Extension Group | 1 |
| 8Y***77 | Pan As-Extension | 1 |
| 8Y***43 | Cushion Kit; (Consists Of Fastener, Cushion Assem.) | 1 |
4w-0483 Gauge Gp-Coolant Temperature
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
| 4W***83 | Gauge Group-Coolant Temperature; (Eng. Coolant)(24 V) | 1 |
155-6003 Gauge Gp-Coolant Temperature -Translucent Face
| 15***03 | Gauge Group-Coolant Temperature; -Translucent Face | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
4w-2067 Gauge Gp-Oil Temperature
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
| 4W***67 | Gauge Group-Oil Temperature | 1 |
155-6002 Gauge Gp-Oil Temperature -24 Volt
| 15***02 | Gauge Group-Oil Temperature; -24 Volt | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
5d-6998 Horn Gp-Air
| 15***87 | Cover | 2 |
| 2G***64 | Kit-Diaphragm; (Air Horn) | 2 |
| 4B***75 | Washer (1.75 In. Outside Diameter) | 1 |
5t-0857 Horn Gp-Air -Cab
| 3D***87 | Fitting; - Use When Relocating Air Override Valve To R.H. Side Panel If Equipped With Attachment Parking Brake Control | 1 |
| 3D***43 | Valve As-Horn | 1 |
| 4B***56 | Screw-Machine; (1/4-20x0.75-In) | 2 |
8x-0203 Horn Gp-Air -Chassis
| 2G***33 | Bracket | 1 |
| 2H***23 | Grommet (1.375" Inside Diameter) | 1 |
| 2H***24 | Grommet (.875" Inside Diameter) | 1 |
8y-6862 Housing Gp-Seat Suspension
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
| 8Y***45 | Kit-Suspension Knob; (Height Adjustment)(Suspension Seat) | 1 |
108-4588 Housing Gp-Seat Suspension
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
106-1773 Kit-Conversion-Seat
| 10***73 | Kit-Conversion-Seat | 1 |
2a-6543 Lines Gp-Air Conditioner
| 10***89 | Accumulator-Air Conditioner, . Gear; Ring | 1 |
| 10***39 | Bracket | 1 |
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 1 |
8x-0268 Lines Gp-Heater
| 13***53 | Hose; (192.5cm) (X2) | 2 |
| 1V***22 | Tag-Identification; (Letters Spl) | 2 |
| 1V***23 | Tag-Identification; (Letters Ret) | 2 |
8x-2803 Lines Gp-Window Washer -Window
| 14***95 | Hose; (650-cm Each) | 0 |
| 1P***78 | Clamp; (Hose) | 1 |
| 2V***16 | Clip; (9.52mm Id) | 4 |
149-2357 Module Gp-Message Center -Vids
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***57 | Module Group-Message Center; -Vids-Vids, Vims | 1 |
6v-6643 Module Gp-Message Center
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
| 6V***43 | Module Group-Message Center; -Vims | 1 |
115-6503 Monitor Ar
| 10***03 | Wiring Group-Platform; -Rh | 1 |
| 11***03 | Monitor Ar | 1 |
| 2A***25 | Cab Ar; -Ems | 1 |
8x-2824 Motor Gp-Window Wiper -Front
| 2L***67 | Locknut; (3/8-24-Thd) | 1 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 1 |
| 8X***52 | Kit-Wiper Repair; (Window) | 1 |
8x-2812 Mounting Gp-Cab
| 1D***49 | Bolt (1.25 X 7 X 10in) | 6 |
| 1K***18 | Bolt | 6 |
| 5T***52 | Spacer; (34x55x12-mm Thk) | 21 |
8x-2836 Mounting Gp-Platform -Rh
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 7 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 3 |
| 8T***36 | Capscrew; (Hex Hd) (M10 X 1.50 X 25l Gr 10.9) | 7 |
226-7674 Pan Gp-Backrest
| 13***43 | Plate As-Lumbar | 1 |
| 16***83 | Knob-Lumbar | 1 |
| 17***52 | Retainer | 1 |
8y-5909 Pan Gp-Backrest -Back
| 2F***06 | Screw-Machine (6-32x. 25in); (6-32x0.25-In) | 1 |
| 3E***35 | Clip | 1 |
| 3E***36 | Stud-Ball | 1 |
178-0605 Pan Gp-Backrest -Lumbar
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***05 | Pan Group-Backrest; -Lumbar | 1 |
108-8421 Pan Gp-Backrest -Lumbar
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
| 10***23 | Shaft As-Lumbar | 1 |
| 10***24 | Pan-Lumbar | 1 |
292-9240 Pan Gp-Backrest -Cloth
| 16***83 | Knob-Lumbar | 1 |
| 25***28 | Plug | 3 |
| 29***00 | Cushion As | 1 |
251-7684 Pan Gp-Backrest -Cloth
| 16***83 | Knob-Lumbar | 1 |
| 17***05 | Pan Group-Backrest; -Lumbar | 1 |
| 21***48 | Cushion As | 1 |
218-0864 Pan Gp-Backrest -Cloth
| 13***43 | Plate As-Lumbar | 1 |
| 16***83 | Knob-Lumbar | 1 |
| 17***52 | Retainer | 1 |
292-6402 Pan Gp-Backrest -Lumbar
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***07 | Holder | 1 |
8y-5992 Pan Gp-Seat
| 3K***97 | Pin 3.18 mm(.125 In.) Diameter | 4 |
| 6V***56 | Ring-Retaining | 2 |
| 8Y***92 | Pan As-Seat; (Bottom) | 1 |
114-9462 Panel Gp-Instrument -Keypad
| 10***66 | Bezel | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
114-9463 Panel Gp-Instrument -Speed/Tachometer
| 10***67 | Bezel | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***76 | Film-Dash; (Instrument Panel) | 1 |
2a-6503 Panel Gp-Instrument -Speedometer, Tach
| 11***38 | Panel Group-Instrument; -Speedometer, Tach | 1 |
| 2A***03 | Panel Group-Instrument; -Speedometer, Tach | 1 |
| 2G***51 | Socket As (Each Includes:) | 9 |
2a-6463 Panel Gp-Instrument -Speedometer, Tach
| 09***37 | Spacer; (12-mm Thk) | 2 |
| 1P***10 | Tape (Order By The Meter) (Use As | 0 |
| 2A***17 | Plate As | 1 |
114-9464 Panel Gp-Instrument -Keypad, Speedometer, Tach
| 10***77 | Film-Instruction; (Arc) | 1 |
| 11***62 | Panel Group-Instrument; -Keypad | 1 |
| 11***63 | Panel Group-Instrument; -Speed/Tachometer | 1 |
110-2238 Panel Gp-Instrument -Speedometer, Tach
| 09***37 | Spacer; (12-mm Thk) | 2 |
| 11***38 | Panel Group-Instrument; -Speedometer, Tach | 1 |
| 11***08 | Film-Dash; (Instrument Panel) | 1 |
8x-7946 Pedal Gp-Governor
| 1M***37 | Spring | 1 |
| 2K***67 | Pin-Spring | 1 |
| 2N***56 | Screw-Machine; (10-24x1.5-In) | 2 |
257-6993 Pedal Gp-Governor
| 13***50 | Plate As | 1 |
| 1M***37 | Spring | 1 |
| 21***84 | Sensor Group-Position; (Rotary)(Engine Speed) | 1 |
8x-0264 Platform Gp
| 2G***85 | Latch | 2 |
| 4S***36 | Button (To Air Conditioner Condenser Holes); Button (To Air Conditioner Condenser Holes) | 1 |
| 5B***66 | Hinge | 4 |
210-2270 Recliner Gp-Seat
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
215-3880 Recliner Gp-Seat
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
8y-3792 Seat Belt Gp -Retractable
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 1 |
| 8Y***92 | Seat Belt Group; -Retractable-Operator | 1 |
122-4617 Seat Belt Gp -Retractable
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 4D***32 | Locknut (7/16-20 Thd) | 1 |
220-0131 Seat Belt Gp -Retractable
| 17***37 | Spacer; (11.7x19.8x20.3-mm Thk)(Lh Seat Side) | 1 |
| 18***59 | Screw-Pan Head; (7/16-20x1.75-In)(Lh Seat Side) | 1 |
| 18***60 | Screw-Pan Head; (7/16-20x1.25-In)(Rh Seat Side) | 1 |
156-1149 Seat Belt Gp -Operator
| 15***49 | Seat Belt Group; -Retractable | 1 |
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 1 |
| 7X***10 | Washer-Hard; (15.5x29x3-mm Thk) | 1 |
8y-6857 Seat Belt Gp -Operator
| 0T***44 | Bolt (1.25" Long) | 1 |
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 2 |
| 7X***10 | Washer-Hard; (15.5x29x3-mm Thk) | 2 |
138-4021 Seat Gp
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 13***21 | Seat Group | 1 |
| 13***44 | Seat Group | 1 |
138-8344 Seat Gp
| 06***03 | Shim (.060mm Thk); (1.52-mm Thk) | 4 |
| 09***78 | Pin-Spring | 1 |
| 09***14 | Pin, Clevis | 1 |
226-7677 Seat Gp -Cloth
| 09***43 | Pin-Cotter | 2 |
| 14***25 | Spring | 1 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
186-3056 Seat Gp -Cloth
| 09***93 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
252-9713 Seat Gp
| 16***89 | Block-Slider | 4 |
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
8y-6907 Seat Gp
| 11***54 | Kit-Cover | 1 |
| 11***55 | Kit-Lumbar Valve; (Seat Frame As) | 1 |
| 11***56 | Kit-Spring Handle | 1 |
8w-7235 Seat Gp -Contour Mechanical
| 03***41 | Block-Adjustment | 2 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 10 |
| 5S***79 | Hex Head Capscrew, 3/8 Nc X 7/8 In. (22 mm) | 10 |
8y-5986 Seat Gp -Cloth, Lumbar
| 06***03 | Shim (.060mm Thk); (1.52-mm Thk) | 4 |
| 09***78 | Pin-Spring | 1 |
| 1C***69 | Bolt (1/2 In. Long 5/16 In. Dia.); Support Assembly To Heater Group | 2 |
252-9714 Seat Gp
| 16***23 | Armrest Group; -Rh | 1 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 3 |
| 22***31 | Seat Belt Group; -Retractable-Operator | 1 |
186-3055 Seat Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 11***91 | Rod | 1 |
| 17***37 | Spacer; (11.7x19.8x20.3-mm Thk)(Lh Seat Side) | 1 |
137-0078 Seat Gp-Adjustable -Operator-Comfort Air
| 03***41 | Block-Adjustment | 2 |
| 11***28 | Suspension Group-Seat; -Air | 1 |
| 13***42 | Support As | 1 |
257-5596 Seat Gp-Adjustable
| 14***85 | Support As | 1 |
| 25***13 | Seat Group | 1 |
| 25***96 | Seat Group-Adjustable | 1 |
253-5207 Seat Gp-Adjustable
| 14***85 | Support As | 1 |
| 1F***50 | Nut Rops Support | 4 |
| 25***13 | Seat Group | 1 |
2a-6380 Seat Gp-Adjustable -Air-Operator
| 2A***80 | Seat Group-Adjustable; -Air-Operator | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 6 |
255-8772 Seat Gp-Companion
| 14***25 | Support As | 1 |
| 22***77 | Seat Group-Suspension; -Cloth, Lumbar | 1 |
| 25***72 | Seat Group-Companion | 1 |
5t-6543 Seat Gp-Companion
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 4 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 2 |
8w-2967 Seat Gp-Companion
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 1B***04 | Nut-Full | 1 |
| 1H***57 | Screw-Machine; (5/16-18x0.8-In) | 8 |
8y-6137 Seat Gp-Suspension
| 10***87 | Suspension Group-Seat; -Adjustable | 1 |
| 14***45 | Kit-Slider Block; (Suspension Seat) | 1 |
| 4F***79 | Bolt Clip To Tube Assembly (Aftercooler Radiator Inlet) | 1 |
224-2677 Seat Gp-Suspension -Cloth, Lumbar
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 18***55 | Seat Group | 1 |
8x-2822 Shaft Gp-Wiper
| 06***37 | Bushing-Linkage | 1 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 1 |
| 2G***22 | Bearing | 1 |
155-6004 Speedometer Gp
| 15***04 | Speedometer Group | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 4 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 4 |
3t-3408 Speedometer Gp -Standard
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 3T***08 | Speedometer Group; -Standard | 1 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
5t-6537 Control Gp-Steering
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 06***45 | Bearing-Tube | 1 |
| 10***70 | Spacer | 1 |
221-1206 Support Gp-Seat Belt
| 22***06 | Support Group-Seat Belt; -Cloth | 1 |
| 22***37 | Support As | 1 |
| 22***38 | Support As | 1 |
108-4587 Suspension Gp-Seat
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
150-7719 Suspension Gp-Seat
| 10***17 | Bumper | 2 |
| 12***57 | Shaft | 2 |
| 12***28 | Kit-Roller; (Incls Parts Marked S) | 1 |
119-7028 Suspension Gp-Seat -Air
| 10***17 | Bumper | 2 |
| 11***28 | Suspension Group-Seat; -Air | 1 |
| 12***57 | Shaft | 2 |
199-5727 Suspension Gp-Seat -Air
| 10***03 | Fastener | 26 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
| 14***26 | Film-Instruction; (Seat Adjustment) | 1 |
8y-5982 Suspension Gp-Seat -Variable
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
| 10***96 | Kit-Suspension Shaft; ((Includes Bearings) | 1 |
2a-6687 Tachograph Ar
| 2A***87 | Tachograph Ar | 1 |
| 2A***75 | Drive Group-Tachograph; -Chassis | 1 |
| 2A***76 | Tachograph Group; -Cab | 1 |
5t-9075 Tachograph Gp
| 1L***12 | Adapter-Tachometer | 1 |
| 1S***36 | Flexible Shaft 66 Inches | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
2a-6776 Tachograph Gp -Cab
| 2A***76 | Tachograph Group; -Cab | 1 |
| 5T***75 | Tachograph Group | 1 |
| 7N***29 | Connector To Cab Wall | 1 |
155-6005 Tachometer Gp
| 15***05 | Tachometer Group | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 4 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 4 |
8c-5471 Tachometer Gp
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
| 6V***68 | Nut (6-32)Thd; (No. 6-32) | 3 |
8x-2792 Tank Gp-Window Washer
| 1P***78 | Clamp; (Hose) | 2 |
| 2D***35 | Grommet 20.64 mm(.813 In.)O.D. | 1 |
| 4D***94 | Clip-- Compressor Clutch Wire To Compressor Body | 3 |
3d-9943 Valve As-Horn
| 3B***09 | Pin Governor And Decelerator Control | 1 |
| 3D***43 | Valve As-Horn | 1 |
| 4D***33 | Spring | 1 |
9d-3886 Valve Gp-Air Control -Retarder
| 1S***99 | Graduating Spring | 1 |
| 2G***81 | Adapter | 1 |
| 3B***04 | Lockwasher--Sheet Assembly To Angle Assembly | 2 |
121-5709 Valve Gp-Air Control -Exhaust Bypass
| 00***33 | Tee-Pipe | 1 |
| 12***09 | Valve Group-Air Control; -Exhaust Bypass | 1 |
| 18***80 | Valve Group-Solenoid | 1 |
5t-8174 Valve Gp-Air Control -Window Wiper
| 5T***23 | Knob; (Window Wiper) | 1 |
| 5T***74 | Valve Group-Air Control; -Window Wiper | 1 |
9d-8097 Valve Gp-Air Control -Service Brake
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 3 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 3 |
| 4D***06 | Plate | 1 |
143-2404 Valve Gp-Air Control
| 14***04 | Valve Group-Air Control; -Secondary Brake | 1 |
| 14***26 | Adapter | 1 |
| 2G***95 | Piston | 1 |
246-2901 Valve Gp-Air Control
| 14***26 | Adapter | 1 |
| 1S***99 | Graduating Spring | 1 |
| 24***01 | Valve Group-Air Control; -Service Brake-Cab | 1 |
9d-8098 Valve Gp-Air Control -Secondary Brake
| 2G***95 | Piston | 1 |
| 2G***59 | Cam & Follower As | 1 |
| 2G***81 | Adapter | 1 |
9d-8097 Valve Gp-Air Control
| 14***12 | Valve Group-Brake; (Parking & Service) | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 3 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 3 |
115-6483 Vims Ar
| 11***36 | Wiring Group-Engine; -Eui Vims | 1 |
| 11***60 | Cab Ar; -Vims | 1 |
| 11***78 | Wiring Group-Machine; -Vims | 1 |
5t-6548 Visor Gp-Cab
| 1D***76 | Bolt-Carriage; (3/8-16x0.875-In)(Rh & Lh Plates) | 2 |
| 3K***60 | Nut, Hex (3/8 - 16 Nc, Plastic Insert) | 1 |
| 5T***48 | Visor Group-Cab | 1 |
224-9912 Visor Gp-Cab
| 22***12 | Visor Group-Cab | 1 |
| 22***13 | Visor As | 1 |
| 9X***42 | Screw-Truss Head (M6x1.0x12mm); (M6x1.00x12mm) | 4 |
5t-1342 Washer Gp-Window
| 2D***35 | Grommet 20.64 mm(.813 In.)O.D. | 2 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 4 |
| 5P***74 | Tuber (R.H. Front 1.75 M(68.88 In.) | 0 |
8w-6212 Window Gp -Door, Rh
| 2G***18 | Nut | 2 |
| 5K***05 | Nut-Barrel; (6-32-Thd) | 2 |
| 5P***25 | Seal (Use As Required) 5.4m | 0 |
2g-0263 Window Gp -Door, Lh
| 2G***63 | Window Group; -Door, Lh | 1 |
| 2G***12 | Window As; (Lh) | 1 |
| 6G***75 | Kit-Handle; (Lh)(Vent Window) | 1 |
8w-6211 Window Gp-Cab -Door, Rh
| 2V***31 | Catch | 1 |
| 3V***96 | Lock As-Window | 1 |
| 4V***43 | Stop | 1 |
5t-6550 Wiper Gp-Window
| 2A***26 | Screw-Machine | 1 |
| 3K***89 | Nut-Self Locking; (5-40-Thd) | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
Power Train
9w-4119 Actuator Gp-Rotary
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 2 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
| 3E***54 | Ball | 1 |
8x-0250 Axle & Mounting Gp
| 1T***84 | Bolt-Socket Head; (5/16-18x1-In) | 4 |
| 1V***59 | Ring-Retaining | 2 |
| 7I***93 | Clamp | 2 |
6y-5644 Case Gp-Transmission
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 18 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 21 |
| 1D***17 | Nut-Plate And Angle Assembly To Hydraulic And Fuel Tanks; Nut Plate And Angle Assembly To Hydraulic And Fuel Tanks | 10 |
8e-3842 Control Gp-Transmission Hyd
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
123-9425 Cooler Gp-Rear Axle Oil
| 12***25 | Cooler Group-Rear Axle Oil | 1 |
| 12***25 | Cooler-Oil | 1 |
| 12***23 | Mount; (Motor) | 1 |
126-2526 Cooler Gp-Rear Axle Oil
| 12***25 | Cooler Group-Rear Axle Oil | 1 |
| 12***23 | Bracket | 1 |
| 12***24 | Bracket | 1 |
7t-4997 Cover Gp-Shipping -Transmission
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 8 |
| 0S***83 | Bolt 31.75 mm(1.25 In.) Long | 2 |
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 4 |
8x-0243 Differential & Bevel Gear Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 7 |
| 2N***88 | Cup-Roller Bearing | 1 |
| 3S***23 | Washer 5.7 cm(2.24 In.)O.D. | 4 |
104-4699 Differential & Bevel Gear Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 7 |
| 10***98 | Differential Group | 1 |
| 10***99 | Differential & Bevel Gear Group | 1 |
135-0471 Differential & Bevel Gear Gp
| 03***37 | Bolt-Self Locking; 3.81cm(1.5 In.)Long | 1 |
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 6 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 3 |
124-6018 Differential & Bevel Gear Gp
| 03***37 | Bolt-Self Locking; 3.81cm(1.5 In.)Long | 1 |
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 6 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 3 |
8x-0244 Differential Gp
| 2F***64 | Nut; (2-1/8-12-Thd) | 4 |
| 2N***89 | Cone-Roller Bearing | 1 |
| 4D***34 | Bearing As-Roller | 4 |
124-6022 Differential Gp
| 10***01 | Pinion As | 1 |
| 10***58 | Nut; (2-1/8-Thd) | 4 |
| 12***22 | Differential Group | 1 |
104-4698 Differential Gp
| 10***98 | Differential Group | 1 |
| 10***01 | Pinion As | 1 |
| 10***58 | Nut; (2-1/8-Thd) | 4 |
8x-2797 Fastener Gp-Pump Drive
| 8T***22 | Washer-Hard-To Lock Carrier Rollers | 4 |
| 8T***93 | Bolt-Plt; (M16 X 2.0 X 50) | 4 |
| 8X***97 | Fastener Group-Pump Drive | 1 |
8x-0238 Filter & Lines Gp-Torque Conv
| 10***40 | Plate As | 1 |
| 10***41 | Tube As | 1 |
| 10***42 | Tube As | 1 |
6e-5927 Filter Gp-Oil -Torque Converter-Rear Brake Cooling
| 13***76 | Filter Element As-Oil; (Ultra High Efficiency)(Ultra High Efficiency) | 2 |
| 1H***00 | Pin--To Compression Release Shaft | 2 |
| 1R***41 | Filter Element As-Oil; (Standard Efficiency) | 2 |
125-3286 Filter Gp-Oil -Rear Axle
| 12***42 | Base-Xmsn Oil Filter | 1 |
| 12***86 | Filter Group-Oil; -Transmission | 1 |
| 1R***73 | Filter Element As-Oil; (Advanced Efficiency)(Disposable Transmission Oil) | 1 |
126-7840 Filter Gp-Oil -Rear Axle
| 12***95 | Spool | 1 |
| 12***40 | Filter Group-Oil; -Rear Axle | 1 |
| 12***44 | Base-Oil Filter | 1 |
8e-0769 Filter Gp-Oil -Parking Brake Release-Xmsn Charging, Lubrication
| 13***75 | Filter Element As-Oil; (Ultra High Efficiency)(Cleanout/High Efficiency) | 1 |
| 1R***19 | Filter Element As-Oil; (Standard Efficiency)(Power Train) | 1 |
| 2J***56 | Ring-Retaining | 1 |
6y-5643 Gear Gp-Transfer
| 0S***02 | Bolt; (5/8-18x3.5-In) | 1 |
| 12***36 | Race-Bearing; Bearing-Race | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 16 |
109-1089 Guide Gp-Axle
| 10***77 | Guide | 0 |
| 10***89 | Guide Group-Axle | 1 |
| 2H***92 | Bearing-Ball | 0 |
8x-0246 Housing Gp-Rear Axle
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 03***28 | Clip; (31.8mm Id) | 3 |
| 0L***07 | Grommet | 1 |
126-2659 Lines Gp-Power Train Filter
| 12***86 | Filter Group-Oil; -Transmission | 1 |
| 12***59 | Lines Group-Power Train Filter | 1 |
| 12***62 | Valve As | 1 |
8x-0239 Lines Gp-Transmission Oil
| 10***44 | Tube As | 1 |
| 11***09 | Tube As | 1 |
| 1P***05 | Seal (Check Valve Outlet) | 2 |
8x-0466 Mounting Gp-Bevel Gear & Xmsn
| 10***61 | Spacer; (22x35x40-mm Thk) | 28 |
| 2H***32 | Seal--To Bottom Cover On Selector Valve | 1 |
| 5D***28 | Seal-O-Ring | 1 |
8x-2642 Mounting Gp-Rim -Front & Rear
| 10***31 | Plate | 2 |
| 10***32 | Plate | 4 |
| 10***83 | Clamp As | 2 |
8x-2809 Mounting Gp-Wheel -Rear
| 12***75 | Bolt; (M30x3.5x120-mm) | 82 |
| 17***54 | Bolt; (L=130mm) | 6 |
| 17***55 | Bolt; (M30x3.5x160-mm) | 6 |
5t-6639 Neutralizer Gp-Transmission
| 01***08 | Screw-Machine | 2 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
| 1B***06 | Key-Woodruff | 1 |
257-6988 Neutralizer Gp-Transmission
| 01***08 | Screw-Machine | 2 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
| 1B***06 | Key-Woodruff | 1 |
6y-5642 Planetary Gp-Transmission
| 03***37 | Bolt-Self Locking; 3.81cm(1.5 In.)Long | 10 |
| 06***16 | Ring-Retaining | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 24 |
125-6061 Pump & Lines Gp-Rear Axle Lube
| 08***08 | Washer; (16.6x32x5-mm Thk) | 1 |
| 11***35 | Gear; (46-Teeth) | 1 |
| 12***55 | Tube As | 1 |
135-0472 Pump & Lines Gp-Rear Axle Lube
| 08***08 | Washer; (16.6x32x5-mm Thk) | 1 |
| 11***35 | Gear; (46-Teeth) | 1 |
| 12***48 | Pump Group-Gear; -Rear Axle Oil | 1 |
125-8648 Pump Gp-Gear -Axle Oil
| 00***00 | Ring-Snap | 1 |
| 07***23 | Seal, Ring | 2 |
| 07***63 | Plate | 2 |
173-4034 Rim Gp -80 Series
| 10***46 | Hose As | 1 |
| 11***27 | Hose Assem. | 1 |
| 12***70 | Seal-Ring; (536mm Id) | 2 |
174-3162 Rim Gp -80 Series
| 17***34 | Rim Group; -80 Series | 1 |
| 17***83 | Rim Group-Demountable; -80 Series | 6 |
| 17***62 | Rim Group; -80 Series | 1 |
8x-0247 Rim Gp-Demountable
| 10***90 | Rim As | 1 |
| 10***02 | Band-Bead Seat | 1 |
| 10***03 | Flange | 2 |
138-7582 Rim Gp-Demountable
| 10***02 | Band-Bead Seat | 1 |
| 13***62 | Rim As | 1 |
| 13***82 | Rim Group-Demountable | 1 |
173-5383 Rim Gp-Demountable -80 Series
| 17***72 | Flange | 2 |
| 17***83 | Rim Group-Demountable; -80 Series | 1 |
| 27***16 | Rim As-Demountable | 1 |
7i-5051 Rim Gp-Single
| 2D***08 | Grommmet | 1 |
| 5T***90 | Valve Group-Tire | 1 |
| 5T***66 | Locknut; (11/16-24-Thd) | 1 |
111-8865 Rim Gp-Single
| 11***65 | Rim Group-Single | 1 |
| 13***82 | Rim Group-Demountable | 1 |
| 2D***08 | Grommmet | 1 |
7t-4554 Screen Gp-Magnetic -Transmission
| 1A***69 | Bolt (R.H. Side Flywheel Housing) | 2 |
| 3D***71 | Stud-Taperlock; (3/8-16x1.5-In)(3/8 In.Nc X 1 1/2) | 8 |
| 3S***39 | Cover-Top | 2 |
8x-0249 Shaft Gp-Drive -Main
| 2N***86 | Bolt-12 Point Head | 8 |
| 8X***49 | Shaft Group-Drive; -Main | 1 |
| 8X***33 | Slip Joint Group | 1 |
8x-0433 Slip Joint Gp
| 2N***86 | Bolt-12 Point Head | 8 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
| 5T***82 | Kit-Seal | 1 |
116-5809 Torque Converter Gp -W/Housing
| 03***80 | Bolt 4.128 cm(1.625 In.) Long | 16 |
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 17 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
6y-5485 Torque Converter Gp -W/Housing
| 03***80 | Bolt 4.128 cm(1.625 In.) Long | 16 |
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 17 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
6y-5486 Torque Converter Gp -Free Wheel & Lock-Up
| 06***58 | Ball Bearing | 1 |
| 0L***28 | Bolt 10.16 mm(4 In.) Long | 1 |
| 0S***02 | Bolt; (5/8-18x3.5-In) | 3 |
116-5808 Torque Converter Gp -Freewheel & Lockup
| 06***58 | Ball Bearing | 1 |
| 0L***28 | Bolt 10.16 mm(4 In.) Long | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 12 |
6y-5645 Transmission Ar
| 3E***72 | Kit-Gasket; (Tsmn Hydraulic Control) | 1 |
| 3E***91 | Kit-Gasket; (Torque Converter) | 1 |
| 3T***29 | Sensor Group-Speed; -Transmission Output | 1 |
230-4113 Universal Joint Gp
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 8 |
| 10***87 | Spider And Bearing | 2 |
| 23***13 | Universal Joint Group | 1 |
5t-6567 Universal Joint Gp
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 8 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 8 |
| 5T***66 | Tube | 1 |
230-4112 Universal Joint Gp
| 23***12 | Universal Joint Group | 1 |
| 23***13 | Universal Joint Group | 1 |
| 8X***14 | Universal Joint Group-Pump Drive | 1 |
8e-3841 Valve Gp-Transmission Control -Xmsn Oil Press Control
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 1 |
| 1D***41 | Bolt 3.00 In.(7.62 cm) Long | 12 |
| 1F***11 | Bolt 3.50 In. (8.89 cm) Long | 1 |
8e-0771 Valve Gp-Cooler Bypass -Transmission Oil
| 1P***20 | Spring (Outer) | 1 |
| 1S***43 | Spring (Inner) | 1 |
| 2K***94 | Pin-Spring; (7.94x76.2-mm) | 1 |
126-7837 Valve Gp-Flow Control & Relief -Final Drive
| 12***37 | Valve Group-Flow Control & Relief; -Final Drive | 1 |
| 12***39 | Piston | 1 |
| 1B***04 | Spring (Inner) | 1 |
8e-6146 Valve Gp-Lockup Clutch & Sync
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
| 1D***40 | Bolt,Machine Fuel Filter Mounting | 4 |
| 1U***76 | Connector | 1 |
6t-3340 Valve Gp-Lube Relief -Transmission Oil
| 3J***93 | Spring | 1 |
| 6T***40 | Valve Group-Lube Relief; -Transmission Hydraulic Control | 1 |
| 7M***85 | Seal,Adapter,Motor Part Of Kit P/N 5r***29 | 1 |
8e-3840 Valve Gp-Pressure Control -Transmission Oil
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 1 |
| 16***78 | Body-Load Piston | 7 |
| 1S***36 | Retainer | 1 |
6i-9533 Valve Gp-Relay -Transmission
| 6I***33 | Valve Group-Relay; -Lockup Clutch | 1 |
| 7X***20 | Valve Group-Solenoid; (Synchronization) | 1 |
| 9U***16 | Valve Group-Relay; -Lockup Clutch | 1 |
106-0723 Valve Gp-Relay -Transmission
| 10***22 | Valve Group-Solenoid | 1 |
| 10***23 | Valve Group-Relay; -Transmission | 1 |
| 9U***16 | Valve Group-Relay; -Lockup Clutch | 1 |
9u-9716 Valve Gp-Relay -Lockup Clutch
| 2P***00 | Spring (Outer) | 1 |
| 2R***06 | Connector Valve Assembly To; Connector- Tube Assembly To Logic Valve | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
8e-0773 Valve Gp-Relief -Tc Inlet
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1L***62 | Ring-Retaining | 1 |
| 2P***38 | Spool Assembly, Including:- | 1 |
9w-7403 Valve Gp-Relief
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1L***62 | Ring-Retaining | 1 |
| 2P***38 | Spool Assembly, Including:- | 1 |
3t-0290 Valve Gp-Selector & Press Cont -Transmission Oil
| 03***30 | Bolt-Self Locking; (5/16unc X 3/4) | 1 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 2 |
| 12***33 | Spring As | 2 |
3t-0062 Valve Gp-Solenoid
| 11***03 | Seal-O-Ring | 1 |
| 13***34 | Screen As; (Traction Control Valve) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
9g-9988 Valve Gp-Solenoid
| 12***48 | Kit-Seal; (Solenoid Valve) | 0 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
| 16***43 | Washer-Identification; (16.8x38.1x.5mm Thk) | 1 |
105-4922 Valve Gp-Solenoid
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 10***22 | Valve Group-Solenoid | 1 |
| 10***61 | Gasket | 1 |
107-8238 Valve Gp-Solenoid
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 10***38 | Valve Group-Solenoid | 1 |
| 10***11 | Cartridge As | 1 |
7x-1120 Valve Gp-Solenoid
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 10***70 | Locknut; (1/4-20-Thd) | 1 |
| 4B***76 | Washer Generator Line Leads (Use As Required) | 1 |
9g-9208 Valve Gp-Traction Control
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 10 |
8x-0270 Wheel, Brake & Suspension Gp -Front
| 03***67 | Ring; (Back Up) | 1 |
| 03***39 | Seal-O-Ring (Id=9.25mm) | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 1 |
8x-0270 Wheel & Brake Gp -Front
| 03***67 | Ring; (Back Up) | 1 |
| 03***39 | Seal-O-Ring (Id=9.25mm) | 1 |
| 12***70 | Seal-Ring; (536mm Id) | 1 |
121-0594 Wheel Gp -Rear Inner Duo-Cone
| 12***94 | Wheel Group; -Rear Inner Duo-Cone | 1 |
| 12***95 | Spacer | 1 |
| 9X***55 | Bolt-Socket Head; (M6x1x16.7-mm) | 2 |
8x-0252 Wheel Gp-Final Drive & Brake
| 10***45 | Retainer | 4 |
| 10***13 | Wheel As | 1 |
| 14***43 | Ring-Toric | 2 |
107-3152 Wheel Gp-Final Drive & Brake
| 10***45 | Retainer | 4 |
| 10***13 | Wheel As | 1 |
| 10***30 | Hub | 1 |
125-6508 Wheel Gp-Final Drive & Brake
| 10***45 | Retainer | 4 |
| 10***30 | Plate | 2 |
| 10***30 | Hub | 1 |
113-4328 Wheel Gp-Final Drive & Brake
| 10***45 | Retainer | 4 |
| 10***13 | Wheel As | 1 |
| 10***16 | Section | 1 |
Service Equipment And Supplies
9g-9288 Cap Gp-Protection -Transmission Tank Fill Cap
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 2J***61 | Ring-Retaining | 1 |
5t-6942 Cap Gp-Protection
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 2J***61 | Ring-Retaining | 1 |
6g-8390 Protection Gp-Vandalism -Tc, Hoist, Brake
| 11***81 | Cover-Hydraulic Cap | 1 |
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 1M***49 | Ring (5.313" Dia.) | 1 |
102-8544 Film Gp
| 10***84 | Film-Stripe; (Caterpillar) | 1 |
| 10***85 | Film-Stripe; (Rh)(Cat) | 1 |
| 10***44 | Film Group | 1 |
109-5895 Film-Instruction
| 10***95 | Film-Instruction | 1 |
3e-9646 Plate & Film Gp
| 10***35 | Film-Warning; (Cable Connection) | 1 |
| 10***78 | Plate-Instruction; (Grease) | 1 |
| 10***08 | Film-Information; (Engine Oil)(Install On Oil Filter Cap) | 1 |
260-8756 Plate & Film Gp
| 10***79 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***58 | Film-Instruction; (Retarding Guidelines) | 1 |
| 26***56 | Plate & Film Group | 1 |
3e-9648 Plate & Film Gp
| 10***37 | Film-Warning; (Jumper Cable Use) | 1 |
| 10***38 | Film-Warning; (Unit Injector) | 5 |
| 10***41 | Film-Warning; (High Pressure Cylinder)(High Pressure Cylinder) | 4 |
111-3312 Plate & Film Gp
| 10***18 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***40 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***55 | Film-Instruction; (Retarding Guidelines) | 1 |
111-1799 Plate & Film Gp
| 10***15 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***37 | Film-Information; (Transmission Control)(Display Modes) | 1 |
| 10***52 | Film-Instruction; (Retarding Guidelines) | 1 |
102-8524 Plate & Film Gp
| 10***24 | Plate & Film Group | 1 |
| 10***43 | Film-Warning; (Cable Connection) | 1 |
| 10***44 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
3e-9652 Plate & Film Gp
| 10***28 | Film-Instruction; (Hydraulic Accumulator)(Japanese) | 4 |
| 10***44 | Film-Warning; (Cable Connection) | 1 |
| 10***45 | Film-Warning; (Unit Injector) | 5 |
3e-9650 Plate & Film Gp
| 10***39 | Film-Warning; (Cable Connection) | 1 |
| 10***40 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
| 10***43 | Film-Warning; (High Pressure Cylinder) | 4 |
111-3313 Plate & Film Gp
| 10***68 | Plate-Warning; (Machine Operation) | 1 |
| 10***31 | Film-Instruction; (Automatic Retarder Control)(Arc) | 1 |
| 10***33 | Film-Information; (Payload Measurement) | 1 |
3e-9653 Plate & Film Gp
| 10***45 | Film-Warning; (Cable Connection) | 1 |
| 10***46 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
| 10***50 | Film-Warning; (High Pressure Cylinder) | 4 |
3e-9651 Plate & Film Gp
| 10***40 | Film-Warning; (Cable Connection) | 1 |
| 10***41 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
| 10***44 | Film-Warning; (High Pressure Cylinder) | 4 |
111-3311 Plate & Film Gp
| 10***17 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***39 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***54 | Film-Instruction; (Retarding Guidelines) | 1 |
102-8525 Plate & Film Gp
| 10***65 | Plate-Notice; (Voltage) | 1 |
| 10***74 | Plate-Instruction; (Grease) | 2 |
| 10***23 | Film-Instruction; (Hydraulic Accumulator) | 4 |
3e-9647 Plate & Film Gp
| 10***36 | Film-Warning; (Cable Connection) | 1 |
| 10***37 | Film-Warning; (Electrical Shock Hazard) | 5 |
| 10***39 | Film-Warning; (High Pressure Cylinder) | 4 |
111-1793 Plate & Film Gp
| 10***79 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***58 | Film-Instruction; (Retarding Guidelines) | 1 |
| 11***93 | Plate & Film Group | 1 |
111-1801 Plate & Film Gp
| 10***40 | Film-Identification; (Truck Payload Measurement Sys)(Truck Payload Monitor System) | 1 |
| 10***20 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***57 | Film-Instruction; (Retarding Guidelines) | 1 |
111-3314 Plate & Film Gp
| 10***43 | Film-Information; (Payload Measurement) | 1 |
| 10***21 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***42 | Film-Information; (Transmission Control) | 1 |
111-1802 Plate & Film Gp
| 10***16 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***38 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***53 | Film-Instruction; (Retarding Guidelines) | 1 |
111-1800 Plate & Film Gp
| 10***19 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***48 | Film-Information; (Payload Measurement)(Tpms) | 1 |
| 10***41 | Film-Information; (Transmission Control)(Display Modes) | 1 |
102-8523 Plate & Film Gp
| 10***23 | Plate & Film Group | 1 |
| 10***42 | Film-Warning; (Cable Connection) | 1 |
| 10***43 | Film-Warning; (Unit Injector) | 5 |
111-1798 Plate & Film Gp
| 10***14 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***36 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***51 | Film-Instruction; (Retarding Guidelines) | 1 |
3e-9649 Plate & Film Gp
| 10***38 | Film-Warning; (Cable Connection) | 1 |
| 10***39 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
| 10***42 | Film-Warning; (High Pressure Cylinder) | 4 |
102-8522 Plate & Film Gp
| 10***22 | Plate & Film Group | 1 |
| 10***41 | Film-Warning; (Cable Connection) | 1 |
| 10***42 | Film-Warning; (Elec Shock Hazard, Danish) | 5 |
111-1794 Plate & Film Gp -Cab
| 11***92 | Plate-Instruction; (Air Conditioner) | 1 |
| 11***94 | Plate & Film Group; -Cab | 1 |
| 8T***30 | Film-Hoist Lever-On Upper Rear Corner | 1 |
105-2720 Plate & Film Gp
| 10***69 | Plate-Notice; (Voltage) | 1 |
| 10***65 | Film-Warning; (Crankcase)(Crankcase Cover Removal) | 3 |
| 10***66 | Film-Warning; (Unit Injector) | 5 |
111-1796 Plate & Film Gp
| 10***11 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***34 | Film-Information; (Transmission Control)(Display Modes) | 1 |
| 10***49 | Film-Instruction; (Retarding Guidelines) | 1 |
111-1795 Plate & Film Gp
| 10***09 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***33 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***48 | Film-Instruction; (Retarding Guidelines) | 1 |
111-1797 Plate & Film Gp
| 10***13 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***35 | Film-Information; (Transmission Control)(Display Modes) | 1 |
| 10***50 | Film-Instruction; (Retarding Guidelines) | 1 |
3e-9621 Plate & Film Gp
| 10***44 | Film Group | 1 |
| 11***94 | Plate & Film Group; -Cab | 1 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 2 |
100-8376 Plate-Warning -Stopping
| 10***76 | Plate-Warning; -Stopping | 1 |
Steering System
6e-5215 Filter Gp-Oil -Steering
| 10***53 | Filter-Oil; (Advanced Efficiency) | 1 |
| 13***14 | Filter As-Hydraulic; (Steering)(Fire Resistant Fluid) | 1 |
| 6E***15 | Filter Group-Hydraulic; -Steering Oil Cooler | 1 |
7i-5076 Accumulator & Mounting Gp
| 3E***19 | Clamp-Hose | 2 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 8 |
| 5T***31 | Ring | 2 |
6e-5160 Accumulator Gp-Steering
| 14***99 | Kit-Repair; (Accumulator Bladder)(Steering) | 1 |
| 16***05 | Ring | 1 |
| 16***06 | Spacer; (80x101.6x7.2-mm Thk) | 2 |
130-6043 Cooler Gp-Steering Oil
| 13***00 | Plate | 1 |
| 13***01 | Bracket | 1 |
| 13***39 | Valve Group-Cooler Bypass; (Low Pressure Hydraulic Oil) | 1 |
8x-0259 Cylinder & Mtg Gp-Steering
| 3J***99 | Self Locking Nut; (2 1/4-12) | 4 |
| 5T***03 | Plug | 4 |
| 5T***67 | Ring-Retaining | 4 |
9t-8912 Cylinder Gp-Steering
| 14***74 | Seal-Buffer | 1 |
| 14***88 | Seal-Lip Type | 1 |
| 15***87 | Kit-Seal; (Steering Cylinder) | 1 |
8x-2829 Fastener Gp-Steering Arm
| 3J***99 | Self Locking Nut; (2 1/4-12) | 1 |
| 8T***83 | Bolt; (M30x3.5x110-mm) | 20 |
| 8X***29 | Fastener Group-Steering Arm; -Outer | 1 |
8x-2838 Filter & Lines Gp -Steering Oil
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 4T***15 | Filter-Oil; (Standard Efficiency)(Steering Pump Case Drain) | 1 |
| 6E***75 | Filter Group-Oil; (Steering Pump Case Drain) | 1 |
1u-8331 Fitting Gp-Quick Disconnect
| 1U***28 | Fitting; (Quick Disconnect, Male) | 1 |
| 1U***29 | Cap-Dust; (Steering Tank) | 1 |
| 1U***31 | Fitting Group-Quick Disconnect | 1 |
8x-0237 Lines Gp-Steering -Chassis
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
| 10***39 | Adapter | 1 |
| 10***46 | Hose As | 1 |
8x-2835 Lines Gp-Steering -Cab
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 4 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 3 |
2a-6946 Link Gp-Steering
| 2A***43 | Socket As; (Lh Threads) | 1 |
| 2A***44 | Socket As; (Rh Threads) | 1 |
| 2A***46 | Link Group-Steering | 1 |
8x-0208 Link Gp-Steering
| 13***60 | Lock | 1 |
| 13***71 | Arm-Center | 1 |
| 13***72 | Arm-Steering | 2 |
8x-2839 Mounting Gp-Steering Tank
| 11***52 | Valve-Breaker Relief; (Hydraulic Tank Relief) | 1 |
| 1U***31 | Fitting Group-Quick Disconnect | 1 |
| 3B***31 | Elbow, 45 Degrees 1/2 Npt Adapter - Low Power Take-Off | 1 |
8x-0260 Pump & Mtg Gp-Steering
| 5F***99 | Packing,Preformed Cover Mtg; Part Of Kit P/N 5r***25 Part Of Kit P/N 8s***57 | 1 |
| 6E***27 | Pump Group-Piston; -Steering | 1 |
| 8X***60 | Pump & Mtg Group-Steering | 1 |
9t-1318 Pump Gp-Metering -Steering
| 14***37 | Kit-Seal; (Steering Pump) | 1 |
| 6C***11 | Spacer | 1 |
| 6C***12 | Drive-Control | 1 |
6e-4221 Swashplate Gp -Steering Pump
| 13***32 | Block-Stop | 2 |
| 6E***21 | Swashplate Group; -Implement Pump | 1 |
| 8F***19 | Seal (4.47 Degrees I.D.) | 2 |
184-1527 Swashplate Gp -Steering Pump
| 16***01 | Swashplate Stop | 2 |
| 18***27 | Swashplate Group; -Implement Pump | 1 |
| 1H***37 | Pin (Spring) | 2 |
6e-0918 Tank & Filter Gp-Steering
| 11***93 | Screen; (Hydraulic) | 1 |
| 1R***22 | Filter Element As-Oil; (Standard Efficiency)(Disposable) | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 1 |
132-6285 Tank & Filter Gp-Steering
| 11***93 | Screen; (Hydraulic) | 1 |
| 12***98 | Cover As | 1 |
| 13***85 | Tank & Filter Group-Steering | 1 |
125-4276 Tank & Filter Gp-Steering
| 11***93 | Screen; (Hydraulic) | 1 |
| 12***76 | Tank & Filter Group-Steering | 1 |
| 12***98 | Cover As | 1 |
120-4622 Valve Gp-Accumulator Charging
| 12***22 | Valve Group-Accumulator Charging | 1 |
| 12***15 | Valve Group-Pilot; -Accum Charging-Cut Off | 1 |
| 12***16 | Valve Group-Pilot; -Accumulator Charging Cut-In | 1 |
107-7446 Valve Gp-Accumulator Charging
| 10***46 | Valve Group-Accumulator Charging | 1 |
| 11***37 | Valve As-Plt Unl | 1 |
| 7X***81 | Kit-Seal; (Pressure Reducing Valve) | 1 |
108-2185 Valve Gp-Relief -Steering
| 10***85 | Valve Group-Relief; -Primary-Primary Steering | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***41 | Spring | 1 |
4t-2764 Valve Gp-Relief -Steering
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***41 | Spring | 1 |
| 4T***64 | Valve Group-Relief; (Line, Tilt Cylinder Head End) | 1 |
149-2658 Valve Gp-Solenoid
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 14***11 | Cartridge Assem. | 1 |
| 14***58 | Valve Group-Solenoid; -Blade Lock | 1 |
149-2610 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***10 | Valve Group-Solenoid; -Axle Oil Cooler-Hydraulic Lockout | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
6t-8046 Valve Gp-Solenoid
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 3G***71 | Cartridge Assem. | 1 |
| 3G***75 | Seal Kit; (Includes Seals And Ring) | 1 |
9t-8930 Valve Gp-Solenoid & Relief -Steering
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 4T***64 | Valve Group-Relief; (Line, Tilt Cylinder Head End) | 1 |
9t-8931 Valve Gp-Steering -Control
| 14***45 | Cover | 1 |
| 14***47 | Cover | 1 |
| 24***74 | Seal-O-Ring | 4 |
793B serial number reference
The PIN plate on a 793B is mounted on the truck frame, typically on the right-hand frame rail near the front of the machine below the cab/operator station, with the number also stamped into the frame itself. Read the first three characters as the serial number prefix (model/plant identifier, 1HL for the 793B) and the following digits as the sequential unit number within that prefix; a plate reading 1HL00323 is unit 323 of the 793B production run.
| Prefix | Identifies | Notes |
|---|---|---|
| 1HL | 793B Off-Highway Truck, single production series (1992-1996) | Sole PIN prefix for the 793B, range 1HL00001-UP. Built 1992-1996. Powered by the Cat 3512/3516 EUI (electronic unit injection) engine family, shared with the 784B, 785B and 789B off-highway trucks/tractors of the same era. No sub-prefix split, treat as one continuous serial run for this model. Net engine power is thinly documented for this exact model; figures in the 1600-1700 kW (2150-2300 hp) class appear in different sources, confirm exact rating with your dealer using the PIN. Do not use 3516B or 3516B HD power figures for this model, those belong to the later 793C/793D generations. |
Frequently asked questions
What engine does the Caterpillar 793B use?
The 793B is powered by the Caterpillar 3516 EUI (Electronic Unit Injection) V16 diesel, a 69 L engine with gross output cited in the range of roughly 1,530 to 1,610 kW (2,050 to 2,160 hp) depending on the source. This is a different engine than the 3516B and 3516B HD used on the later 793C and 793D.
What is the operating weight of the Caterpillar 793B?
Fully loaded operating weight is approximately 376.5 t (about 830,000 lb), with a rated payload capacity around 218 t (roughly 240 US tons, about 480,000 lb), placing the 793B in Caterpillar's 240-ton ultra-class truck bracket.
What replaced the Caterpillar 793B?
The 793B was succeeded by the 793C, introduced in 1996 with the upgraded Cat 3516B engine and more power. The 793B itself had replaced the original 793 (1991-92), making it the second generation of the 793 family.
What 793B owners discuss
What should I know about the 793B's retarder and service brakes before working it hard on grade?
The automatic retarder control is speed-adjustable and shares the same oil-cooled, multiple-disc brake packs used for service, parking, and secondary braking. Cooling is continuous, water-to-oil heat exchangers on all four wheel ends. Traction control uses the same discs: if a rear wheel starts to spin, the system clamps that wheel's brake rather than relying on the differential. Extended-life friction material is standard and roughly doubles lining life versus older material, but heat cycling on long haul-road grades is still the main driver of brake wear on this class of truck.
The truck loses its ground-speed signal and the transmission won't shift out of gear, what's the usual cause on a 793B?
A documented cause on this model is failure of the quill shaft that drives the chopper wheel for the transmission output speed sensor. When it shears, the ICM transmission ECM loses its ground-speed signal. That alone doesn't force a downshift, it typically makes the transmission hold in whatever gear it's already in. Check the quill shaft and its coupling before chasing a valve body or clutch fault on an unexplained "stuck in gear" complaint.
Transmission suddenly drops several gears at once braking down a loaded ramp, is that a fault?
Normal behavior for the electronic transmission control, not a defect. If the rear wheels lock hard enough under braking, the ECM reads that as zero ground speed and runs a rapid multi-gear downshift to match engine and driveline speed. It self-corrects once wheel speed and ground speed agree again. Operators new to the truck sometimes mistake this for a slipping clutch or a runaway downshift.
Does it matter which "3516" engine is actually in a 793B?
Yes. The 793B uses the Cat 3516 electronic unit injection engine, a different engine from the 3516B high-displacement unit in the 793C and the 3516C in the 793D, even though the base family number is the same. Unit injectors, aftercooler circuit, and ECM/wiring are not shared across the plain 3516 and the later B/C variants. Confirm the actual engine fitted, off the engine ECM and serial plate rather than the truck's model badge, before ordering parts or pulling troubleshooting steps. 793C/D documentation does not carry over cleanly to a 793B engine.
Is there a known steering failure risk on the 793B worth checking proactively?
Yes. A documented case involved a 793B losing steering while running downhill empty: the pivot pin coupling the steering center arm to the chassis detached after the high-tensile retaining bolts on its locking device broke, dropping the steering mechanism below the frame and putting the front wheels into a toe-out position. The same mine had seen this failure mode more than once over a few years. The same center-arm steering design is shared with the 777, 785, 789, and 793A/C, so it isn't unique to the B-model. Watch for ball-joint wear as an early warning sign and inspect the center arm pivot pin retaining hardware on a set schedule. Have your dealer verify the retaining bolts, lock, and torque spec before returning a truck to service.
What wear points get missed on these trucks, beyond tires and brakes?
Frame high-stress weld areas are the big one; treat dye-penetrant checks there as routine, especially on trucks worked on soft or uneven haul roads, since fatigue cracking starts at welds long before it's visible. Suspension is nitrogen-over-oil, single-acting struts with no separate accumulator. Each front pair and each rear pair should hold matched pressure, oil volume, and length when the truck sits level. If there's no leak, struts rarely need a top-up; one that keeps losing charge or rides low has a seal problem, not just a low charge. Charging must be nitrogen only, introducing air or oxygen into the circuit is an explosion hazard, so leave strut charging to dealer-trained personnel. Tire pressure belongs in the daily check, not just PM intervals; running off spec is behind a large share of OTR tire failures industry-wide and cuts tire life significantly.
What should I check before buying a used 793B?
Pull full oil analysis history on engine, transmission, and final drives rather than trusting hour meters alone. A failed final drive on this size of truck is a six-figure unplanned repair, so rebuild records matter more than a clean walk-around. Confirm the engine actually fitted is the 3516 EUI against the paperwork; a mismatch usually means an engine swap somewhere in its history. Get dye-penetrant results on frame high-stress welds, not just a visual inspection. Check suspension strut pressure and length side to side, brake system condition, and the steering center arm pivot pin and retaining hardware given the known failure mode on this model. Match tire condition to the intended haul application, and get an independent third-party inspection rather than relying only on the seller's records.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 793B part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.