Caterpillaroff-highway trucktruck
Caterpillar 789B
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 789B is a rigid-frame, mechanical-drivetrain off-highway mining truck built in the early-to-mid 1990s as the direct successor to the original 789 launched in 1986. It sits in Cat's large mining truck line, in the roughly 154-177 tonne (170-195 ton) nominal payload class depending on configuration and source, with a fully loaded gross weight around 317 tonnes (350 tons). Power comes from a Cat 3516 V-16 diesel with electronic governor control, in the gross power class of roughly 1,342 kW (1,800 hp), driving a six-speed planetary powershift transmission with lockup torque converter to a single rear differential and final-drive axle. Standard configuration is a two-axle rigid dump-body hauler on 37.00-R57 radial tires with front and rear nitrogen-over-oil suspension struts; factory variation is mostly limited to dump body style, with occasional field conversions to water tank or service-truck roles.
The 789B carried forward the original 789's driveline architecture while adding durability and hydraulic refinements shared with sibling B-series mining trucks of the era, such as the 785B and 793B, including a common cab and electronics layout. Caterpillar replaced it with the 789C in the mid-to-late 1990s, which moved to an EUI-injected 3516B engine for more power and better fuel efficiency, and the line continued through the 789D and today's 789 Next Generation with payloads above 180 tonnes. Because 789B engines, transmissions, differentials, suspension cylinders, and cab components carry over closely within the B-series family, retired units are actively dismantled for reusable components today, keeping this truck relevant to the used and rebuilt parts market even though new-unit production ended decades ago.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 789B specifications
Engine
| Engine model | Cat 3516 EUI, V16 turbocharged-aftercooled diesel — the engine family documented in Caterpillar service literature as shared across the 784B, 785B, 789B and 793B off-highway truck/tractor line. |
| Displacement | 69.1 L (4,217 cu in) |
| Cylinders / bore x stroke | 16 cylinders (V16), bore 170 mm x stroke 190 mm (6.7 in x 7.5 in) |
| Gross / net power | Published figures for this platform run roughly 1,342 kW gross / 1,271 kW net (1,800 hp / 1,705 hp); ratings are not always disambiguated between the 789B and later 789 nameplates, so treat as approximate and verify against the individual machine's data plate. |
| Emissions tier | Built during a production run (1992-2007) that predates mandatory off-highway emissions tier regulation for this size class in most markets. No single emissions tier is consistently documented across the full serial range. |
Weights
| Operating (loaded/gross) weight | Approximately 317.5 t (699,900 lb / 317,460 kg) for this truck class and configuration. |
| Net load / payload capacity | Ranges from approximately 154 t to 177 t (339,500-390,000 lb), varying by configuration/series; confirm against the specific truck's rated payload plate. |
| Ground pressure | Not published for this model. |
Dimensions
| Transport length | 12.18 m (39 ft 11 in) |
| Transport width | Ranges from approximately 6.93 m to 7.34 m (22.7-24.1 ft), depending on body/configuration. |
| Transport height | Approximately 6.15 m (20.2 ft) |
| Wheelbase | Approximately 5.7 m (18.7-18.8 ft) |
| Ground clearance | Not documented for this model. |
Performance
| Maximum travel speed | Approximately 54 km/h (33.6 mph) |
| Outside turning radius | Approximately 27.5 m (90.2 ft) |
| Dump body capacity | Heaped approximately 105 m³ (137.3 yd³); struck approximately 73 m³ (95.5 yd³). |
| Loading height | Approximately 5.21 m (17.1 ft) |
| Gradeability | Not published for this model. |
Service capacities (summary)
| Fuel tank | Approximately 3,220 L (851 gal) for this Cat 789 truck platform; confirm the exact figure against this machine's serial range. |
| Hydraulic system | Not consistently published for this specific machine/generation. |
| Engine oil | Not consistently published for the truck-mounted 3516 application in this chassis (published figures found are for industrial/generator-set 3516 variants, which use different sump configurations, so not carried over). |
| Cooling system | Not consistently published for this specific machine/generation. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
789B fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) – Cat 3516 diesel | Approximately 291 L (77 US gal), per literature for this 789-series chassis/engine platform. Not found in a document specific to this exact machine — verify against this truck's own manual and dipstick level before a full service. | Cat DEO (Diesel Engine Oil), multigrade. SAE 15W-40 for temperate ranges, SAE 10W-30 for cold-weather starts, single-grade SAE 30 or 40 where ambient temperature stays warm and steady. Match viscosity to the temperature chart in this machine's own manual. |
| Cooling system | Approximately 663 L (175 US gal), per literature for this 789-series chassis/engine platform. Confirm against this machine's own manual, since running changes across the production run can shift the figure. | Cat coolant. Earlier-build trucks in this class left the factory on conventional Cat DEAC antifreeze/coolant, which needs periodic supplemental coolant additive treatment. Cat Extended Life Coolant (ELC) is the long-life, silicate-free upgrade path for a coolant flush. Do not mix DEAC and ELC in the same system. |
| Fuel tank | 3222 L (851 US gal) standard tank, stable across this truck platform generation. A larger 3785 L (1000 US gal) tank was also offered as a factory option on trucks in this size class. | Diesel fuel meeting Cat's standard diesel fuel specification for this engine family. Use a cold-weather/winter blend below freezing to prevent fuel gelling and filter plugging. |
| Torque converter / transmission (includes sump) | System total approximately 224 L (59 US gal); sump alone approximately 76 L (20 US gal), per literature for this 789-series platform. Confirm against this machine's own manual. | Cat TDTO (Transmission/Drive Train Oil), TO-4 spec. Grade by ambient temperature — TDTO 10W for cold starts, TDTO 30 for moderate ranges, TDTO 50 for sustained hot climates. |
| Differentials and final drives (rear axle housing) | Approximately 583 L (154 US gal) combined, per literature for this 789-series platform. Confirm against this machine's own manual. | Cat TDTO, TO-4 spec, same fluid family used through the rest of the drivetrain on this size of off-highway truck. Grade by climate as above. |
| Hydraulic system (brake/hoist/dump circuit) and tank | System total approximately 909 L (240 US gal); tank alone approximately 531 L (140 US gal), per literature for this 789-series platform. Confirm against this machine's own manual. | Cat TDTO, TO-4 spec. Off-highway trucks in this size class commonly run the same drivetrain-spec fluid through the oil-cooled brake/hoist circuit rather than a separate hydraulic-only fluid. Confirm the exact call-out against this machine's manual before a full service. |
| Steering system (including tank) | System total approximately 189 L (50 US gal); tank alone approximately 130 L (34 US gal), per literature for this 789-series platform. Confirm against this machine's own manual. | Cat TDTO, TO-4 spec, same family as the rest of the hydraulic/drivetrain circuit. The steering circuit runs its own dedicated tank to keep supply cool and clean, not a different fluid chemistry. |
| Grease – chassis and automatic lubrication system | Spec only; quantity depends on number of lube points and service interval, not a fixed refill volume. | Cat multipurpose chassis grease. NLGI 2 for moderate-to-warm climates; NLGI 1 or 0 for cold weather to keep the automatic lubrication system pumping properly. Maintain per the autolube reservoir fill level. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 789B maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
| Every 15,000 h |
|
Servicing the 789B beyond the schedule
Predictive Maintenance & Fluid Analysis
Run oil sampling on 3516 engine oil, transmission/differential fluid, and hydraulic tank oil every 250 hours; trend metal and soot counts instead of relying on hours alone. Where fitted, cross-check the payload and fault monitoring system against manual walk-arounds - calibration on 789B-era trucks varies by unit, so don't assume every truck reports accurately. Track suspension cylinder nitrogen charge and brake cooling oil condition; both flag drivetrain and structural stress before a failure shows up on the haul road.
Corrective & Common Repairs
Expect wear at the oil-cooled multi-disc brakes, front and rear suspension cylinder rod seals, and the six-speed powershift's torque converter lockup clutch - all high-cycle items on a loaded haul cycle. The electronically governed 3516 develops injector and governor linkage wear over time; watch for rough idle or power loss under grade before it becomes a no-start. Tire and rim damage from haul-road debris is routine on the 37.00-R57 fitment; inspect rims for bead-seat cracking at every tire change, not just visible punctures.
Overhaul & Rebuild Points
Plan a 3516 top-end rebuild around piston, liner, and injector wear trends flagged by oil sampling rather than a fixed hour number; full inframe overhauls follow engine hours and duty cycle. Transmission, torque converter, and differential/final-drive assemblies are scheduled component-life items - rebuild on condition, not just calendar time. Because the 789B is a rigid-frame mining chassis, inspect frame rails, hoist trunnions, and suspension mounting bosses for fatigue cracking at every major overhaul; these structural checks matter as much as powertrain wear on a truck this size.
Seasonal & Environment Servicing
In cold climates, use engine block heaters and verify ether-start or glow-plug aids on the 3516 before shift start; check coolant freeze protection and hydraulic oil grade for ambient temperature. In hot, dry pit environments, service air filters more often against abrasive dust ingestion and monitor tire heat buildup on the 37.00-R57 radials - overheated OTR tires are a real failure mode on this truck class. Wet-season or high-humidity sites should get more frequent fuel-water separator draining and electrical connector corrosion checks around the cab and engine harness.
789B common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1D-4540 | Bolt,Machine Fuel Filter Mounting | Fuel system service | Check fitment → |
| 1R-0755 | Filter As-Fuel | Fuel system service | Check fitment → |
| 141-7903 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 132-8875 | Filter Element As-Oil | Hydraulic service | Check fitment → |
| 1R-0719 | Filter Element As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
789B fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-01 | Engine Oil Pressure sensor circuit: data valid but below the normal operating range | Low oil level, worn or failing oil pump, clogged oil filter, or a faulty oil pressure sensor/wiring | Stop the truck safely, check crankcase oil level and filter condition, then inspect the sensor and its wiring before returning to service |
| 110-00 | Engine Coolant Temperature sensor circuit: data valid but above the normal operating range | Low coolant level, blocked radiator core or fan drive, stuck thermostat, or a faulty coolant temperature sensor | Idle down and stop if temperature keeps climbing, check coolant level and radiator airflow, inspect sensor wiring |
| 168-03 | Electrical System (charging) Voltage: signal above the normal range | Alternator regulator fault or a wiring short pushing charging voltage too high | Check alternator output and regulator, inspect battery cable and charging circuit wiring for shorts |
| 168-04 | Electrical System (charging) Voltage: signal below the normal range | Weak or failing batteries, loose/corroded battery or alternator connections, worn alternator | Load-test batteries, clean and tighten connections, verify alternator charge output |
| 190-08 | Engine Speed/Timing sensor: abnormal frequency or pulse signal | Damaged or misadjusted speed/timing sensor, incorrect sensor air gap, or harness damage near the flywheel housing | Check sensor air gap and mounting, inspect wiring for chafing, replace the sensor if the signal stays erratic; this fault can block engine start |
| 91-03 | Throttle Position sensor: signal voltage above the normal range | Damaged throttle pedal sensor or a wiring short to a higher voltage source | Inspect the throttle pedal sensor and harness, recalibrate or replace the sensor as needed; engine may default to low idle until cleared |
| 102-03 | Boost/Inlet Manifold Pressure sensor: signal voltage above the normal range | Failed boost pressure sensor, damaged sense line, or a wiring short at the sensor connector | Inspect the boost pressure sensor, sense line, and connector; check for a pinched or disconnected line before replacing the sensor |
| 41-04 | Sensor Supply Voltage (low-voltage DC supply shared by several engine sensors): signal below the normal range | Short or open circuit in the shared sensor supply wiring, or an ECM power-supply fault | Check the shared sensor supply wiring for shorts to ground before chasing individual sensor codes that appear at the same time |
| 1-05 | Cylinder No.1 injector solenoid circuit: current below the normal range (open circuit) | Damaged injector wiring or connector, or a failed injector solenoid on that cylinder | Check injector harness continuity and connector condition for that cylinder, test and replace the injector if the circuit checks open |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
789B attachments & work tools
Dump body types
Factory dump bodies for this size/weight class include Dual Slope (original standard, low center of gravity, strong load retention), High Performance (lightweight, extended overhead protection), MSD/MSD II (site-specific, lined or unlined, for mature mines), Combination body (dual-slope-based, for coal and light well-fragmented material), and X Body (updated structural design, more volume at lower weight). This is the current Cat truck-body lineup documented for the 789 line; confirm the exact body offered for a given 789B serial range (1992-2007) with a dealer.
Body liners
Bodies for this class are offered lined or unlined depending on material and site abrasion. Steel wear liners on the floor and sides are the common factory option, with rubber or impact-liner packages also used in some applications to cut noise and material carry-back. Liner choice is matched to the dig/haul material, not sold as a universal kit.
Body mounting / hoist system
The dump body is not a quick-attach work tool. It bolts and pins to the truck frame at the hoist and pivot brackets, with the rear seated on pivot pins and the front raised by hydraulic hoist cylinders powered from the truck's own hydraulic system. Hoist cylinder and pivot sizing is matched to the frame and rated payload, so bodies are not freely interchangeable across configurations.
Tires and wheels
Standard fitment for this class is a rock-service radial tire around 37.00-R57 (E-4); OEM and tire-vendor literature for this size/weight of haul truck also lists 33.00-R51 and 40.00-R57 as alternates depending on rim and duty cycle, so exact size varies by configuration. Radial construction is standard on trucks this size; bias-ply was used historically on earlier units.
Retarder and traction control
Automatic Retarder Control (ARC) is integrated with traction control as one system, using engine compression braking on grade with fuel injection cut by the ECM during retarding. This is tied to the Cat 3516 EUI engine used on the 789B (distinct from the 3516B used on the later 789C and the 3516C on the 789D), and is a drivetrain feature, not a bolt-on attachment.
Fleet and machine monitoring (VIMS)
Vehicle Information Management System (VIMS) is offered for this truck line for onboard machine monitoring, diagnostics, payload and cycle tracking, and haul-road/fleet management, with radio data communication back to a base station. Treat this as an electronics/monitoring option layered on the machine, not a hydraulic work tool.
Cab configurations
Three cab levels are documented for this truck class: Standard, Deluxe, and Deluxe Cold Weather. Deluxe adds a heated and ventilated suspension seat, retractable visor, rear cab access, and vacuum clean-out; the cold-weather cab adds a high-capacity heater/defroster and extended-life coolant rated to roughly -35 degrees C (-30 degrees F) for cold-climate sites.
Vision and proximity technology
Closed-circuit rear and side camera systems with an in-cab monitor, plus proximity/object-detection sensors, are available for this truck class to cover blind spots around the body and wheels. On a 789B still in service these are generally fitted as a retrofit technology kit rather than original-production equipment for a 1990s-2000s build.
Guarding and lighting
Typical fitments for this class include radiator and engine-compartment debris screens, mudguards and wheel guards, and rear/underbody work lighting; dealer-installed fire suppression is a common added safety package on mining trucks this size rather than a standard fitment.
Dump safety interlocks
Common safety features bundled with the body/hoist system on this class include an in-cab body-raised warning indicator, a mechanical body retaining cable to prevent an over-center drop, and a reverse neutralizer that blocks reverse gear while the body is raised. These ship with the body/hoist system rather than as standalone attachments.
All 789B assemblies by section
Every catalogued assembly group for the Caterpillar 789B. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
9y-8267 Cartridge Gp-Turbocharger
| 0S***16 | Screw,Cap,Hexagon H Receptacle Mtg; Bolt Brackets To Firewall Assembly | 4 |
| 1P***20 | Ring-Seal | 1 |
| 1S***70 | Nut (.687" O.D.) | 1 |
2w-3715 Aftercooler Gp-Water
| 03***30 | Bolt-Self Locking; (5/16unc X 3/4) | 30 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 60 |
6i-2972 Air Cleaner Gp
| 0A***26 | Fitting | 2 |
| 3B***93 | Elbow-Pipe | 2 |
| 3B***52 | Elbow; --Cross To Hose Assembly To Air Gauge | 2 |
7e-4621 Air Cleaner Gp
| 00***50 | Retainer; (Ring) | 1 |
| 11***51 | Flange As; (Air Cleaner) | 1 |
| 1N***61 | Nut-Special | 1 |
5t-7820 Exhaust Ar-Body
| 5T***20 | Exhaust Ar-Body | 1 |
| 8W***26 | Guard Group-Platform | 1 |
| 8W***51 | Pipe Group-Exhaust; Piping Gp-Exhaust | 1 |
2w-3697 Lines Gp-Air -Inlet
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 8 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
2w-3713 Lines Gp-Air -Turbocharger
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 28 |
| 13***04 | Elbow | 16 |
2w-3708 Manifold Gp-Exhaust
| 11***71 | Manifold-Exhaust; (Intermediate) | 8 |
| 11***72 | Manifold-Exhaust; (Front Rh) | 2 |
| 11***73 | Manifold-Exhaust; (Rh Rear, Lh Front) | 2 |
2w-3700 Muffler Gp
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 1W***61 | C-Clamp | 1 |
8w-9551 Pipe Gp-Exhaust
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 12 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 8 |
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 4 |
4p-4459 Shield Gp-Exhaust
| 03***35 | Bolt-Locking; (5/16-18x0.625-In) | 59 |
| 14***84 | Plate | 1 |
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 2 |
7c-2864 Turbocharger Gp
| 11***06 | Turbocharger Group | 4 |
| 12***36 | Gasket; (Turbocharger) | 4 |
| 12***15 | Coupling-Elbow | 4 |
7e-9497 Turbocharger Gp
| 2A***62 | Screw,Cap,Hexagon H Diode Pig Tail To Grd; (1/4-20x.625 In) | 4 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 4 |
| 6N***59 | Housing-Compressor; (Compressor) | 1 |
115-3306 Turbocharger Gp
| 11***06 | Turbocharger Group | 1 |
| 11***07 | Housing-Turbine | 1 |
| 6N***59 | Housing-Compressor; (Compressor) | 1 |
188-3580 Valve Gp-Solenoid
| 18***80 | Valve Group-Solenoid | 1 |
| 2L***66 | Terminal-Ring; (10-Ga To 12-Ga, No 10 Screw)(Small) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
Basic Engine
4w-7641 Adapter Gp-Flywheel Housing
| 2B***47 | Bolt (1/2" X 2 1/4") Rops Mounting Bracket To Cover Assembly | 16 |
| 4W***11 | Adapter | 1 |
| 4W***41 | Adapter Group-Flywheel Housing | 1 |
2w-0582 Air Compressor Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 6 |
| 1W***30 | Pan | 1 |
113-8193 Air Compressor Gp
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 3 |
| 11***51 | Air Compressor Group | 1 |
| 11***93 | Air Compressor Group | 1 |
1w-8924 Air Compressor Gp
| 1D***40 | Bolt,Machine Fuel Filter Mounting | 2 |
| 1W***24 | Air Compressor Group | 1 |
| 2S***23 | Cover As; (Governor) | 1 |
110-2751 Air Compressor Gp
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 6 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 8 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
160-9845 Air Compressor Gp
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 6 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 8 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
1w-3893 Belt Tensioner Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
7e-5538 Camshaft Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 11***08 | Plate | 2 |
| 12***94 | Washer As-Thrust | 2 |
7c-4771 Cover Gp-Cylinder Block
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 96 |
2w-0204 Cover Gp-Flywheel Housing
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 39 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
129-9546 Cover Gp-Flywheel Housing
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 39 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
2w-0202 Cover Gp-Front Housing
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 0S***92 | Bolt--Cover To Flywheel Housing | 2 |
| 10***85 | Cover As | 1 |
7e-8756 Cover Gp-Valve Mechanism
| 10***97 | Cover | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
| 2W***72 | Seal-O-Ring; (221.62mm Id) | 1 |
101-0831 Cover Gp-Valve Mechanism
| 10***31 | Cover Group-Valve Mechanism | 1 |
| 10***97 | Cover | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
8n-0337 Crankshaft Gp
| 10***53 | Bearing-Main; (Crankshaft) | 9 |
| 10***54 | Bearing-Main; (0.63-mm Us) | 0 |
| 10***55 | Bearing-Main; (1.27-mm Us) | 0 |
101-1228 Cylinder Block As
| 10***28 | Cylinder Block As | 1 |
| 11***93 | Liner-Cylinder | 16 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
101-1173 Cylinder Block As
| 10***73 | Cylinder Block As | 1 |
| 21***26 | Liner-Cylinder Block | 16 |
| 22***96 | Cap-Crankshaft Bearing | 9 |
7e-4937 Cylinder Block As
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
| 4W***14 | Adapter | 2 |
| 5P***49 | Washer (For Non-R.O.P.S. & Rollover Group) | 36 |
106-2780 Cylinder Block As
| 10***80 | Cylinder Block As | 1 |
| 22***96 | Cap-Crankshaft Bearing | 9 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 4 |
101-1242 Cylinder Block As
| 10***42 | Cylinder Block As | 1 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
| 5P***49 | Washer (For Non-R.O.P.S. & Rollover Group) | 36 |
115-5160 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 10***80 | Cylinder Block As | 1 |
| 11***60 | Cylinder Block Group | 1 |
4p-7264 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 2 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 4 |
7e-8420 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 16 |
115-5156 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 16 |
101-1245 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 10***42 | Cylinder Block As | 1 |
| 10***45 | Cylinder Block Group | 1 |
131-0411 Cylinder Head As
| 13***07 | Insert-Valve Seat; (Standard)(Intake) | 2 |
| 13***08 | Insert-Valve Seat; (Standard)(Exhaust) | 2 |
| 13***11 | Cylinder Head As | 1 |
7e-8760 Cylinder Head As
| 11***91 | Insert-Valve Seat; (Exhaust) | 2 |
| 14***45 | Insert-Valve Seat; (0.508-mm Os Od)(Inlet) | 0 |
| 14***46 | Insert-Valve Seat; (Exhaust 0.51-mm Os Od)(Exhaust) | 0 |
172-0838 Cylinder Head As
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 17***36 | Cylinder Head As | 1 |
131-4339 Cylinder Head As
| 13***13 | Guide-Valve; (Standard) | 4 |
| 13***11 | Cylinder Head As | 1 |
| 13***39 | Cylinder Head As | 1 |
172-0836 Cylinder Head As
| 13***07 | Insert-Valve Seat; (Standard)(Intake) | 2 |
| 13***08 | Insert-Valve Seat; (Standard)(Exhaust) | 2 |
| 14***81 | Insert-Valve Seat; (0.51-mm Os Od)(Intake) | 0 |
7e-8758 Cylinder Head Gp
| 11***91 | Gasket-Cylinder Head | 1 |
| 12***12 | Seal-Water; (11.2mm Id) | 4 |
| 12***13 | Seal-Water; (21.2mm Id) | 4 |
7e-8759 Cylinder Head Gp
| 12***39 | Valve-Exhaust | 2 |
| 13***11 | Cylinder Head As | 1 |
| 13***14 | Rotocoil As | 4 |
156-9137 Cylinder Head Gp
| 12***39 | Valve-Exhaust | 2 |
| 13***11 | Cylinder Head As | 1 |
| 13***14 | Rotocoil As | 4 |
4w-0278 Damper Gp
| 19***88 | Damper As | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 10 |
| 3B***15 | Bolt Guard Assembly To Accessory Drive Housing | 18 |
9y-4748 Damper Gp
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 10 |
| 3B***15 | Bolt Guard Assembly To Accessory Drive Housing | 18 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 18 |
105-4702 Drive Ar-Fan -Variable Speed
| 10***64 | Drive Group-Fan; -Variable Speed | 1 |
| 10***10 | Lines Group-Hydraulic Fan; -Variable Speed | 1 |
| 10***02 | Drive Ar-Fan; -Variable Speed | 1 |
129-2001 Drive Ar-Fan -Variable Speed
| 12***19 | Lines Group-Fan Drive; -Variable Speed | 1 |
| 12***96 | Drive Group-Fan; -Variable Speed | 1 |
| 12***33 | Control Group-Fan; -Variable Speed | 1 |
105-2271 Drive Ar-Fan -Non-Variable Speed
| 03***37 | Bolt-Self Locking; 3.81cm(1.5 In.)Long | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
105-2274 Drive Ar-Fan -Variable Speed
| 10***74 | Drive Ar-Fan; -Variable Speed | 1 |
| 10***02 | Drive Ar-Fan; -Variable Speed | 1 |
| 10***42 | Control Group-Fan; -Variable Speed | 1 |
128-9734 Drive Ar-Fan -Variable Speed
| 12***34 | Drive Ar-Fan; -Variable Speed | 1 |
| 12***86 | Control Group-Fan; -Variable Speed | 1 |
| 12***01 | Drive Ar-Fan; -Variable Speed | 1 |
4p-0853 Drive Gp-Accessory -Upper, Rh
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***00 | Bearing-Sleeve | 2 |
9y-1595 Drive Gp-Accessory -Pump Drive
| 10***24 | Seal As; (Lip Type) | 1 |
| 13***98 | Bearing-Sleeve | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 4 |
115-0597 Drive Gp-Auxiliary -Water Pump
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
| 10***79 | Adapter As | 1 |
| 10***76 | Shaft As-Pump Drive | 1 |
1w-8704 Drive Gp-Auxiliary -Water Pump
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
| 1D***72 | Bolt- 13.97cm(5.5 In.)Long-Location "A" | 2 |
| 1T***20 | Bolt-12 Point Head; (3/8-16x1.25-In) | 2 |
123-6996 Drive Gp-Fan -Variable Speed
| 0S***73 | Bolt (102mm Long); (1/2-13x4-In) | 8 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 10***28 | Pulley-Fan Drive | 1 |
7w-7285 Drive Gp-Fan -Non-Variable Speed
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
| 11***79 | Shaft-Tightener | 1 |
105-4266 Drive Gp-Fan -Non-Variable Speed
| 10***66 | Drive Group-Fan; -Non-Variable Speed | 1 |
| 4W***50 | Pulley-Crankshaft; (8-Groove) | 1 |
| 4W***26 | Kit-Bushing; (Crankshaft Pulley)(Non-Flanged) | 1 |
107-0784 Drive Gp-Fan -Non-Variable Speed
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
| 10***84 | Drive Group-Fan; -Non-Variable Speed-High Altitude Application | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 8 |
105-4264 Drive Gp-Fan -Variable Speed
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 10***28 | Pulley-Fan Drive | 1 |
| 10***05 | Drive Group-Fan; -Variable Speed | 1 |
100-8105 Drive Gp-Fan -Variable Speed
| 10***05 | Drive Group-Fan; -Variable Speed | 1 |
| 10***39 | Shaft As-Fan Clutch | 1 |
| 10***41 | Retainer-Bearing | 1 |
133-5969 Drive Gp-Fan -Variable Speed
| 00***00 | Screw; (5/8-11x1-In) | 8 |
| 10***41 | Retainer-Bearing | 1 |
| 10***42 | Ring-Snap | 1 |
2w-9075 Flywheel Gp
| 10***05 | Flywheel As | 1 |
| 2W***75 | Flywheel Group | 1 |
| 5P***39 | Washer-Hard; (28x42x4-mm Thk) | 2 |
8n-7174 Gear Gp-Front -Standard Rotation
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 5 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
112-5674 Gear Gp-Rear -Cam Drive
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 10***65 | Plate-Thrust | 1 |
| 10***68 | Washer-Thrust; (19.50 X 106 X 1.9mm Thk) | 2 |
7e-5323 Gear Gp-Rear
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 12***50 | Bearing-Sleeve | 1 |
| 1B***67 | Bolt, Hex. Hd., 5/8"-11 N.C. X 3" | 4 |
4n-9680 Governor Gp-Air Compressor
| 2K***98 | Seal-O-Ring | 1 |
| 2S***23 | Cover As; (Governor) | 1 |
| 4N***80 | Governor Group-Air Compressor | 1 |
4p-3747 Guard Gp-Belt -Alternator
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 16***11 | Guard As; (Alternator) | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 2 |
7e-9086 Housing Gp-Flywheel
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 7 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 2 |
| 1D***74 | Bolt (L.H. Side Flywheel Housing) | 7 |
106-7600 Housing Gp-Flywheel
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 7 |
| 10***67 | Adapter | 1 |
| 10***98 | Housing As-Flywheel | 1 |
4p-5426 Housing Gp-Front -Accessory Drive
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 10***34 | Housing-Accessory Drive | 1 |
| 1B***18 | Washer; (25/64 X 5/8 X .064in Thk) | 6 |
8n-7734 Lifting Gp-Engine
| 15***26 | Bracket As | 2 |
| 2B***95 | Cap Screw--Tube Assembly To Air Inlet Pipe | 4 |
| 5P***48 | Washer--Bracket To L.H. Support Rail | 4 |
2w-0194 Lines Gp-Air Compressor
| 03***69 | Elbow-Flared; (1/2-14 Nptf) | 5 |
| 06***17 | Elbow-Flared | 1 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 1 |
115-0596 Lines Gp-Air Compressor
| 03***69 | Elbow-Flared; (1/2-14 Nptf) | 6 |
| 06***17 | Elbow-Flared | 1 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 1 |
7e-4836 Mounting Gp-Alternator
| 05***65 | Sleeve | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 14***16 | Belt-Serpentine; (Alternator) | 1 |
7c-8654 Pan Gp-Oil -Front Sump
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 13***24 | Pan As-Oil | 1 |
119-6297 Pan Gp-Oil -Front Sump
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 11***97 | Pan Group-Oil; -Front Sump | 1 |
6i-2861 Piston & Rod Gp
| 10***30 | Bearing-Connecting Rod; (Standard) | 1 |
| 10***31 | Bearing-Connecting Rod; (0.63-mm Us Id) | 0 |
| 10***32 | Bearing-Connecting Rod; (1.27-mm Us Id) | 0 |
7w-3813 Seal Gp-Crankshaft
| 6I***09 | Seal Group-Crankshaft; (Cw Rotation) | 1 |
| 6I***10 | Seal Group-Crankshaft; (Ccw Rotation) | 1 |
| 7W***13 | Seal Group-Crankshaft | 1 |
2w-3699 Support Gp-Engine
| 1B***09 | Bolt-- Head To Cylinder Block | 8 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 4 |
| 2N***06 | Bolt-12 Point Head | 6 |
251-7646 Support Gp-Fan Drive
| 11***79 | Shaft-Tightener | 1 |
| 25***45 | Shaft | 1 |
| 25***46 | Support Group-Fan Drive | 1 |
7n-1863 Trunnion Gp-Engine
| 1D***66 | Bolt Bracket Assembly To Yoke | 20 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 20 |
| 5P***46 | Washer-Hard; (15.5x29x3-mm Thk) | 16 |
7e-5314 Valve Mechanism Gp
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
| 12***24 | Base As | 1 |
Braking System
5t-0917 Air Dryer Gp
| 2G***34 | Valve-Air Relief | 1 |
| 2G***59 | Air Dryer Group | 1 |
| 2G***82 | Kit-Cartridge; (Replacement)(Incl. Cartridge,Balls,& Seals) | 1 |
5t-4489 Brake Gp-Service & Parking -Rear
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 24 |
| 0S***56 | Bolt 4 1/4 In. (108 mm) --Front Support Assembly To Frame | 110 |
| 10***04 | Housing | 2 |
5t-5070 Brake Gp-Service & Parking -Front
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 16 |
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 70 |
| 10***09 | Anchor-Brake | 2 |
8x-9704 Brake Gp-Service & Parking -Rear
| 0S***20 | Bolt--Customer Grounding Bolt | 6 |
| 10***04 | Housing | 1 |
| 10***06 | Anchor-Brake | 1 |
106-9885 Brake Gp-Service & Parking -Front
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 35 |
| 10***85 | Brake Group-Service & Parking; -Front | 1 |
| 10***10 | Housing | 1 |
198-1911 Brake Gp-Service & Parking -Rear
| 0S***20 | Bolt--Customer Grounding Bolt | 6 |
| 10***04 | Housing | 1 |
| 10***06 | Anchor-Brake | 1 |
164-6607 Brake Gp-Service & Parking -Rear
| 0S***20 | Bolt--Customer Grounding Bolt | 6 |
| 10***04 | Housing | 1 |
| 10***06 | Anchor-Brake | 1 |
5t-6544 Control Gp-Brake -Cab
| 4D***78 | Valve Group-Air Control; -Parking Brake Switch | 1 |
| 4H***47 | Union; - Use When Relocating Air Override Valve To R.H. Side Panel If Equipped With Attachment Parking Brake Control | 1 |
| 4S***27 | Hose Assem. (53" Long Overall) | 1 |
262-1992 Control Gp-Brake
| 26***92 | Control Group-Brake | 1 |
| 4D***78 | Valve Group-Air Control; -Parking Brake Switch | 1 |
| 4H***47 | Union; - Use When Relocating Air Override Valve To R.H. Side Panel If Equipped With Attachment Parking Brake Control | 2 |
5t-1018 Control Gp-Service Brake -Chassis
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 5 |
| 00***54 | Nipple-Pipe | 4 |
| 03***77 | Tee-Pipe | 1 |
2a-6499 Control Gp-Service Brake -Cab
| 00***33 | Tee-Pipe | 1 |
| 03***44 | Bolt-Eye; ( X) | 1 |
| 2A***99 | Control Group-Service Brake; -Cab | 1 |
135-6915 Control Gp-Service Brake -Cab
| 03***44 | Bolt-Eye; ( X) | 1 |
| 13***15 | Control Group-Service Brake; -Cab | 1 |
| 14***01 | Setscrew | 2 |
257-7000 Control Gp-Service Brake
| 03***44 | Bolt-Eye; ( X) | 1 |
| 13***58 | Plate As | 1 |
| 14***01 | Setscrew | 2 |
9t-7204 Cylinder Gp-Air -Tc, Front Brake Cooling-Park, Secondary Brake
| 2K***91 | Ring-Retaining | 1 |
| 5P***47 | Seal-Lip; (25.48 mm Od) | 1 |
| 6E***57 | Kit-Seal; (Hydraulic Cooling) | 1 |
8w-3405 Cylinder Gp-Air/Hydraulic -Service Brake
| 13***31 | Seal | 1 |
| 25***38 | Valve | 1 |
| 2F***16 | Nut (Mounted On Flywheel Housing) | 8 |
115-9177 Hose Gp-Air -Gauge-Brake Pressure
| 11***77 | Hose Group-Air; -Gauge-Brake Pressure | 1 |
| 3B***87 | Coupling; (Pipe) | 1 |
| 3S***15 | Tee; -- Adapter Union-- To Check Valve On Warning System Reservoir | 1 |
5t-4471 Lines Gp-Service Brake -Rear
| 03***17 | Union | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 1 |
| 1P***76 | Flange-Half (Hose To Pump); Flange-Half (32.54mm Bore) | 2 |
5t-1025 Lines Gp-Service Brake -Front
| 2G***00 | Slack Adjuster Group; -Front | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 3 |
5t-1060 Pump & Motor Gp-Brake Release -Parking, Secondary
| 01***80 | Lockwasher | 8 |
| 1T***16 | Bolt; (5/16-18x0.75-In)(12 Point Hd) | 4 |
| 1V***95 | Coupling | 1 |
2a-6515 Retarder Ar-Automatic
| 2A***15 | Retarder Ar-Automatic | 1 |
| 2A***17 | Control Group-Retarder; -Automatic-Electrical | 1 |
| 2A***18 | Control Group-Retarder; -Automatic | 1 |
2g-5900 Slack Adjuster Gp -Front
| 2G***02 | Spring | 2 |
| 2G***00 | Slack Adjuster Group; -Front | 1 |
| 2G***81 | Housing | 2 |
5t-7670 Slack Adjuster Gp -Rear
| 1S***90 | Spring-Diaphragm | 2 |
| 24***83 | Housing | 2 |
| 2G***82 | Base | 1 |
2a-6504 Tank Gp-Air -Cab
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***40 | Reservoir | 1 |
| 2A***04 | Tank Group-Air; -Cab-Secondary | 1 |
5t-0885 Tank Gp-Air -Chassis
| 1D***19 | Nut-Retainer To Fan Bracket Assembly | 4 |
| 2K***55 | Pin (Spring) | 1 |
| 3H***42 | Seal; (Included In Seal Kit) | 1 |
6e-1851 Tank Gp-Brake -Makeup
| 1A***58 | Bolt 1.75 In. (44.45 mm) Long | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
3e-8978 Valve & Mounting Gp -Automatic Retarder
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***15 | Switch As-Pressure; (Auto Retarder Control) | 1 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
127-4661 Valve & Mtg Gp-Brake -Automatic Retarder
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Switch As-Pressure; (Tractor Brake) | 1 |
| 12***61 | Valve & Mtg Group-Brake; -Automatic Retarder | 1 |
217-7906 Valve & Mtg Gp-Brake
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Switch As-Pressure; (Tractor Brake) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
7d-8075 Valve Gp-Air Control
| 00***83 | Ring-Snap | 1 |
| 1S***12 | Retainer-Valve | 1 |
| 4D***89 | Valve Assem. | 1 |
4d-0487 Valve As-Check -Primary Air Tank
| 4D***87 | Valve As-Check; -Air Supply-Primary Air Tank-Service Brake Control | 1 |
9d-8097 Valve Gp-Air Control -Service Brake
| 14***12 | Valve Group-Brake; (Parking & Service) | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 3 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 3 |
4d-3278 Valve Gp-Air Control -Parking Brake
| 3H***07 | Seal-O-Ring; (21.82mm Id) | 1 |
| 4D***78 | Valve Group-Air Control; -Parking Brake Switch | 1 |
| 5D***33 | Nut-Cap | 1 |
149-4133 Valve Gp-Brake -Parking, Secondary
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 2 |
| 11***72 | Valve Group-Relief; -Parking, Secondary Brake | 1 |
| 13***86 | Kit-Seal; (Incls Ring & Seals) | 1 |
113-1543 Valve Gp-Brake -Parking, Secondary
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 2 |
| 11***72 | Valve Group-Relief; -Parking, Secondary Brake | 1 |
| 11***43 | Valve Group-Brake; -Automatic Retarder-Park, Secondary Brake | 1 |
9t-4772 Valve Gp-Brake -Parking, Secondary
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 2 |
| 06***56 | Seal-O-Ring | 1 |
| 1K***66 | Spring-Compensator | 1 |
6d-3781 Valve Gp-Check -Automatic Retarder
| 2R***32 | Guide-Shuttle | 1 |
| 2R***13 | Cap | 1 |
| 3D***45 | Seal-Bottle To Connector | 1 |
1u-2644 Valve Gp-Check -Parking, Secondary Brake
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 1U***44 | Valve Group-Check; -Secondary, Parking Brake | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
105-0170 Valve Gp-Diverter -Tc, Front Brake Cooling
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 2 |
| 06***56 | Seal-O-Ring | 1 |
| 10***75 | Spring | 1 |
9t-7205 Valve Gp-Diverter -Tc, Front Brake Cooling
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 2 |
| 06***56 | Seal-O-Ring | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
9t-4770 Valve Gp-Relief -Parking, Secondary Brake
| 06***39 | Seal-O-Ring | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3G***54 | Cap | 1 |
113-1072 Valve Gp-Relief -Parking, Secondary Brake
| 06***39 | Seal-O-Ring | 1 |
| 11***72 | Valve Group-Relief; -Parking, Secondary Brake | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
6e-6305 Valve Gp-Relief -Parking, Secondary Brake
| 06***39 | Seal-O-Ring | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3G***54 | Cap | 1 |
189-8666 Valve Gp-Solenoid
| 10***17 | Cartridge As | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
3e-8691 Valve Gp-Solenoid
| 10***17 | Cartridge As | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
Cooling System
9x-9482 Valve Gp-Solenoid
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
7e-5328 Connection Gp-Water -Regulator Housing, Outlet
| 11***94 | Cover | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 4 |
| 3E***30 | Plug-Pipe; (3/4-14 Nptf) | 1 |
100-8007 Cooler Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 10***07 | Cooler Group-Engine Oil | 1 |
| 10***08 | Core Group-Engine Oil Cooler | 1 |
141-4108 Core As-Oil Cooler -Rear Brake, Hoist-Front Brake, Tc
| 14***08 | Core As-Oil Cooler; -Rear Brake, Hoist-Front Brake, Tc | 1 |
| 8T***64 | Plug-Pipe; (1/8-27-Thd)(Cylinder Head) | 2 |
100-8008 Core Gp-Engine Oil Cooler
| 10***08 | Core Group-Engine Oil Cooler | 1 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
| 9S***85 | Plug--To Seal Hydraulic Pump To Sump Of Limit System | 1 |
4w-5365 Core Gp-Oil Cooler -Rear Brake, Hoist-Front Brake, Tc
| 4W***65 | Core Group-Oil Cooler; -Rear Brake, Hoist-Front Brake, Tc | 1 |
| 5M***14 | Pipe Plug Cylinder Block Oil Pressure | 2 |
4w-5056 Core Gp-Oil Cooler -Transmission
| 4W***56 | Core Group-Oil Cooler; -Transmission | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
| 9S***91 | Plug,Machine Thread Fuel Injection Pump | 1 |
1n-3599 Cover Gp-Radiator Cap
| 1M***49 | Ring (5.313" Dia.) | 1 |
| 1N***99 | Cover Group-Protection; Radiator Cap Protection Cover Group | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
4p-8532 Fan Gp-Suction
| 10***80 | Angle As-Fan Guard | 1 |
| 10***81 | Guard As-Fan | 4 |
| 11***40 | Spider As-Fan | 1 |
6v-6704 Gauge Gp-Coolant Level
| 10***84 | Dial | 1 |
| 2F***06 | Screw-Machine (6-32x. 25in); (6-32x0.25-In) | 1 |
| 6V***04 | Gauge Group-Coolant Level; -Engine, Aftercooler | 1 |
183-7142 Gauge Gp-Coolant Level
| 10***84 | Dial | 1 |
| 18***42 | Gauge Group-Coolant Level; -Engine, Aftercooler | 1 |
| 1W***01 | Gasket | 1 |
2w-3707 Lines Gp-Water -Turbo
| 03***70 | Tee | 4 |
| 06***08 | Bulkhead Tee | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
7e-9221 Lines Gp-Water -Upper
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 40 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 62 |
| 12***56 | Gasket | 2 |
2w-0211 Lines Gp-Water -Aftercooler
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 1A***64 | Bolt (4.75 In. Long-Location "B") | 2 |
| 1W***72 | Retainer-Ring To Pump Flange | 4 |
2w-3706 Lines Gp-Water -Lower
| 00***89 | Valve As-Drain | 2 |
| 03***67 | Connector-Flared -- Adapter To Hose As. | 2 |
| 03***68 | Elbow (For Use With Shallow Pan) | 2 |
2w-3734 Lines Gp-Water -Tc, Front Brake Cooling, Xmsn
| 17***47 | Tube | 1 |
| 1S***23 | Elbow | 1 |
| 2H***65 | "O" Ring; Seal Pipe To Elbow | 1 |
7w-0486 Lines Gp-Water -Bypass
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 9 |
1w-0410 Pump Gp-Auxiliary Water
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
| 1T***32 | Seal-O-Ring; (234.54mm Id) | 1 |
| 1T***65 | Bolt 2.54 cm (1" Long) | 1 |
7e-9781 Pump Gp-Auxiliary Water
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***00 | Bearing-Sleeve | 1 |
2w-9729 Pump Gp-Water
| 12***00 | Pump Group-Water | 1 |
| 1H***78 | Seal-O-Ring | 1 |
| 2W***29 | Pump Group-Water; Water Pump Group | 1 |
2w-9728 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 16***76 | Seal Group-Water Pump; (Face Type) | 1 |
| 19***21 | Kit-Gasket; (Water Pump Rebuild) | 0 |
122-0500 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 12***50 | Seal Group-Face; (Water Pump) | 1 |
| 12***00 | Pump Group-Water | 1 |
7e-2506 Radiator Gp
| 16***86 | Seal-End Tank; (Narrow End) | 29 |
| 16***87 | Seal-End Tank; (Wide End) | 29 |
| 2W***81 | Core As-Radiator | 29 |
2w-3695 Radiator Gp
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 02***41 | Bolt-Socket Head; (1/4-28x0.625-In) | 8 |
| 03***76 | Elbow-Flared | 1 |
7w-0942 Housing & Regulator Gp -Outlet Control
| 11***74 | Valve As-Vent Line | 1 |
| 12***33 | Housing As-Regulator | 1 |
| 24***13 | Regulator-Water Temperature; (92-Deg C)(Water, Coolant Temperature) | 4 |
127-4441 Shield Gp-Water Manifold
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 12***41 | Shield Group-Water Manifold | 1 |
132-2165 Shutter Ar-Radiator
| 13***65 | Shutter Ar-Radiator | 1 |
| 13***66 | Shutter Group-Radiator | 1 |
| 13***68 | Wiring Group-Engine; -Shutter | 1 |
8x-9748 Shutter As-Radiator -Left Hand
| 06***36 | Bushing-Flanged | 13 |
| 1B***03 | Nut Exhaust Pipe To Starting Engine Cylinder Block | 1 |
| 1K***03 | Washer 1.49 mm(.059 In.) Thick | 39 |
8x-9749 Shutter As-Radiator -Right Hand
| 06***36 | Bushing-Flanged | 13 |
| 1B***03 | Nut Exhaust Pipe To Starting Engine Cylinder Block | 1 |
| 1K***03 | Washer 1.49 mm(.059 In.) Thick | 39 |
8x-0569 Shutter Gp-Radiator
| 1B***03 | Nut Exhaust Pipe To Starting Engine Cylinder Block | 4 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 16 |
| 3B***06 | Washer,Lock; Flange,Elbow,Clamp Assembly,Tube To Pump,Tube Assembly To Screen,Clip Mounting,And Tube Assembly To Transmission | 4 |
132-2166 Shutter Gp-Radiator
| 00***10 | Tee; (Pipe) | 2 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 10***12 | Seal; (Interface) | 1 |
8x-0523 Shutter Gp-Radiator
| 00***10 | Tee; (Pipe) | 2 |
| 10***12 | Switch; (Air Conditioning) | 1 |
| 10***44 | Harness As; (Air Conditioning) | 1 |
6d-1039 Valve Gp-Air Control -Radiator Shutter
| 3P***59 | Spring | 1 |
| 6D***39 | Valve As; -Exhaust Bypass-Exhaust Diverter | 1 |
| 6F***72 | Seal (.674" Inside Diameter) | 1 |
Electrical And Starting System
3e-5191 Control Gp-Power Train -Transmission/Chassis
| 3E***91 | Control Group-Electronic; -Transmission/Chassis | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 5 |
9x-7823 Control Gp-Electronic -Steering Warning
| 10***96 | Control Group-Electronic; -Steering Warning | 1 |
| 9X***23 | Control Group-Electronic; -Steering Warning | 1 |
| 9X***11 | Film-Steering Warning | 1 |
125-5855 Control Gp-Electronic -Cat Monitoring System
| 12***55 | Control Group-Electronic; -Cat Monitoring System | 1 |
| 15***17 | Control Group-Monitor; -Cat Monitoring System | 1 |
106-2996 Control Gp-Electronic -Steering Warning
| 10***96 | Control Group-Electronic; -Steering Warning | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 3 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
104-4287 Control Gp-Power Train -Transmission/Chassis
| 10***87 | Control Group-Electronic; -Transmission/Chassis | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 5 |
132-3814 Control Gp-Electronic
| 13***14 | Control Group-Neutral Start Elek; (Neutral Start) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 7 |
7x-6399 Lamp Gp-Dome -Cab
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
7x-6398 Lamp Gp-Dome -Cab
| 4S***88 | Terminal; (Blade-Crimp Type)(Male) | 1 |
| 5P***71 | Terminal (To Flasher Unit & Turn Signal Switch) | 1 |
| 7N***43 | Lamp-Miniature; (Dome) | 1 |
9g-9813 Alarm Gp -Action
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
9x-7803 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 4 |
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
2a-6529 Battery & Wiring Gp -Chassis/Ems
| 03***48 | Clip; (11.11mm .437in Id) | 5 |
| 03***97 | Boot | 2 |
| 09***04 | Terminal-Ring; (2-Ga, 3/8-In Screw) | 2 |
115-6477 Battery & Wiring Gp -Chassis/Vims
| 03***48 | Clip; (11.11mm .437in Id) | 5 |
| 03***97 | Boot | 1 |
| 09***04 | Terminal-Ring; (2-Ga, 3/8-In Screw) | 2 |
239-4254 Control & Mtg Gp-Electronic
| 10***59 | Spacer; (9x20x39.2-mm Thk) | 2 |
| 13***89 | Plate Assem. | 1 |
| 14***08 | Spacer; (10x19.5x61-mm Thk) | 2 |
7e-9084 Control & Mtg Gp-Engine Elek -Ecm-Advanced
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
235-8156 Control & Mtg Gp-Monitor
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***00 | Clip; (Tab) | 2 |
255-8771 Control & Mtg Gp-Power Train
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 19***47 | Control Group-Power Train; -Transmission, Chassis | 1 |
| 1F***50 | Nut Rops Support | 2 |
8x-9640 Control & Mtg Gp-Power Train
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 10***56 | Plate As | 2 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
5t-1017 Control Gp-Air Starting
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 1L***66 | Elbow-External Pipe Thread | 2 |
| 3B***52 | Elbow; --Cross To Hose Assembly To Air Gauge | 1 |
8w-9322 Control Gp-Air Starting -Turbine
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 1L***66 | Elbow-External Pipe Thread | 2 |
| 3B***52 | Elbow; --Cross To Hose Assembly To Air Gauge | 1 |
3e-5477 Control Gp-Eng Ratings Elek
| 12***88 | Control Group-Electronic | 1 |
| 3E***77 | Control Group-Eng Ratings Elek | 1 |
| 3E***99 | Plate-Marking | 1 |
105-5402 Control Gp-Eng Ratings Elek
| 10***02 | Control Group-Eng Ratings Elek | 1 |
| 3E***99 | Plate-Marking | 1 |
133-3990 Control Gp-Eng Ratings Elek
| 13***90 | Control Group-Eng Ratings Elek | 1 |
| 3E***99 | Plate-Marking | 1 |
174-3494 Control Gp-Eng Ratings Elek
| 17***94 | Control Group-Eng Ratings Elek | 1 |
154-9147 Control Gp-Eng Ratings Elek
| 15***47 | Control Group-Eng Ratings Elek | 1 |
110-7485 Control Gp-Eng Ratings Elek
| 11***85 | Control Group-Eng Ratings Elek | 1 |
| 3E***99 | Plate-Marking | 1 |
9g-9287 Control Gp-Engine Electronic -Engine Shutdown
| 1S***93 | Strap; (Cable) (0.62in Dia) | 3 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 4 |
9x-3207 Control Gp-Electronic
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 7N***81 | Housing-Receptacle; (14-Ga To 18-Ga) | 1 |
106-4709 Control Gp-Fan -Variable Speed
| 10***99 | Sensor As-Liquid Level; (Jacket Water Cooler Temp) | 1 |
| 10***88 | Harness As; (Fan Control) | 1 |
| 10***09 | Control Group-Fan; -Variable Speed | 1 |
108-2842 Control Gp-Fan -Variable Speed
| 10***95 | Sensor; (Brake Oil Cooler Temp) | 1 |
| 10***12 | Switch; (Air Conditioning) | 1 |
| 10***44 | Harness As; (Air Conditioning) | 1 |
129-1986 Control Gp-Fan -Variable Speed
| 10***32 | Control Group-Electronic; (Coolant Temp Sensor) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 11***60 | Switch As-Pressure; (A/C Compressor) | 1 |
128-9733 Control Gp-Fan -Variable Speed
| 12***33 | Control Group-Fan; -Variable Speed | 1 |
| 13***38 | Adapter | 1 |
| 3E***70 | Control Group-Electronic | 1 |
3e-3663 Control Gp-Machine -Automatic Retarder
| 10***88 | Control Group-Electronic; (Automatic Retarder) | 1 |
| 3E***63 | Control Group-Machine; -Automatic Retarder-Automatic Retarder | 1 |
| 3E***28 | Film-Instruction; (Automatic Retarder Control) | 1 |
3e-5390 Control Gp-Power Train -Transmission/Chassis
| 11***91 | Control Group-Power Train; -Transmission/Chassis | 1 |
| 11***88 | Film-Oht Eptc-Ii | 1 |
| 3E***90 | Control Group-Power Train; -Transmission/Chassis-Transmission, Chassis | 1 |
110-7491 Control Gp-Power Train -Transmission/Chassis
| 11***91 | Control Group-Power Train; -Transmission/Chassis | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***75 | Housing-Receptacle; (Receptacle) | 1 |
199-9847 Control Gp-Power Train -Transmission, Chassis
| 19***47 | Control Group-Power Train; -Transmission, Chassis | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***73 | Housing-Receptacle; (14-Ga To 18-Ga) | 1 |
199-9850 Control Gp-Power Train -Automatic Retarder Control
| 19***50 | Control Group-Power Train; -Automatic Retarder Control-Automatic Retarder | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***73 | Housing-Receptacle; (14-Ga To 18-Ga) | 1 |
121-2842 Control Gp-Power Train -Transmission/Chassis
| 12***42 | Control Group-Power Train; -Transmission/Chassis | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***75 | Housing-Receptacle; (Receptacle) | 1 |
118-2452 Control Gp-Power Train -Transmisson/Chassis
| 11***52 | Control Group-Power Train; -Transmisson/Chassis | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***75 | Housing-Receptacle; (Receptacle) | 1 |
128-0869 Control Gp-Traction Electronic -Aeta
| 12***69 | Control Group-Traction Electronic; -Aeta | 1 |
| 12***80 | Film-Information; (Traction Control) | 1 |
| 13***38 | Control Group-Traction Electronic; (Aeta) | 1 |
160-4891 Control Gp-Unprogrammed
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 14***80 | Battery Group-Electronic Control; (Road Analysis/Vims Main Module) | 1 |
| 16***91 | Control Group-Unprogrammed; -Vims Main Module-Road Analysis Control | 1 |
6v-6702 Control Gp-Vids/Vims Main
| 11***36 | Control Group-Electronic; (Vims-Main/Display) | 1 |
| 3E***43 | Film-Module; (Vims) | 1 |
| 6V***02 | Control Group-Vids/Vims Main | 1 |
116-8903 Control Gp-Vids/Vims Main
| 11***03 | Control Group-Vids/Vims Main | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
| 3T***47 | Clip As-To Harness Connectors If 9g***54 | 1 |
3t-5438 Distributor Gp-Electronic -Transmission Speed
| 3T***38 | Distributor Group-Electronic; -Transmission Speed | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 3 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 4 |
6g-9462 Harness As-Wiring
| 5P***23 | Wire 4.55m (Br/Bk2); (1-Conn. Ether Starting System Sending Unit / 1-Conn. Solenoid Valve Ether Start System) | 0 |
| 6G***62 | Harness As | 1 |
| 7K***75 | Connector Assem. (Fuse Holder) | 6 |
8w-4723 Heater Gp-Fuel
| 03***69 | Elbow-Flared; (1/2-14 Nptf) | 1 |
| 03***34 | Elbow-Flared | 1 |
| 06***17 | Elbow-Flared | 1 |
123-6883 Heater Gp-Jacket Water
| 12***83 | Heater Group-Jacket Water | 1 |
| 6N***04 | Cap As-Dust; (Jacket Water Heater Elements) | 4 |
| 6T***64 | Element As-Jacket Water Heater | 4 |
8w-4065 Heater Gp-Engine Oil
| 14***52 | Box As | 1 |
| 15***06 | Panel | 1 |
| 2H***33 | Screw-Machine; (10-32x0.25-In) | 1 |
3t-3967 Lamp Gp-Signal -Parking, Turn
| 03***35 | Lamp-Miniature | 1 |
| 3T***67 | Lamp Group; -Parking, Turn | 1 |
| 7D***13 | Lens Kit - Amber (Consists Of Lens, Gasket And Screws)> | 1 |
9x-4381 Lamp Gp-Flood -Backup
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
6n-7989 Lamp Gp-Flood
| 2P***68 | Moulding | 1 |
| 6N***87 | Lamp-Sealed Unit | 1 |
| 6N***88 | Body As-Lamp | 1 |
171-2065 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***72 | Body As-Lamp | 1 |
9x-1439 Lamp Gp-Flood -Backup
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
3t-4411 Lamp Gp-Flood -Ladder Access
| 3T***11 | Lamp Group-Flood; -Hood Light-Ladder | 1 |
| 6N***87 | Lamp-Sealed Unit | 1 |
| 6T***79 | Body As-Lamp | 1 |
162-3294 Lamp Gp-Flood -Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
168-1953 Lamp Gp-Head -Low Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***77 | Lens As; (Headlight, Low Beam) | 1 |
171-2067 Lamp Gp-Head -High Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***49 | Lens As; (Headlight, High Beam) | 1 |
| 15***52 | Bezel | 1 |
9x-7170 Lamp Gp-Head -High Beam
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
9x-7165 Lamp Gp-Head -Low Beam, Vertical Mount
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 9X***55 | Body As-Lamp | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
9x-7169 Lamp Gp-Head -Low Beam
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
9x-7166 Lamp Gp-Head -High Beam
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 9X***55 | Body As-Lamp | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
115-6488 Lamp Gp-Payload Signal -Rh Platform
| 11***88 | Lamp Group-Payload Signal; -Rh Platform | 1 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 9 |
| 6G***21 | Bracket | 1 |
115-6487 Lamp Gp-Signal -Payload-Cab
| 11***87 | Lamp Group-Signal; -Payload-Cab | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 4 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 9 |
108-1289 Lamp Gp-Signal -Stop, Tail
| 10***89 | Lamp Group-Signal; -Stop, Tail | 1 |
| 10***91 | Body As-Lamp | 1 |
| 2P***68 | Moulding | 1 |
8t-9683 Lamp Gp-Signal
| 7D***14 | Kit (Lens) (Includes Gasket, Screw & Lens) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
6v-1119 Lamp Gp-Signal -Turn
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
| 10***54 | Body As; (Lamp) | 1 |
6v-1108 Lamp Gp-Signal -Stop, Tail, Red
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
| 10***54 | Body As; (Lamp) | 1 |
8t-9684 Lamp Gp-Signal
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***38 | Housing-Receptacle-Sure Seal-Assemble | 1 |
135-0428 Lamp Gp-Signal
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***28 | Lamp Group-Signal; -Park, Turn | 1 |
| 14***39 | Harness As-Lighting; (Signal Lamp)(Signal Lamp) | 1 |
107-2282 Lamp Gp-Signal
| 10***82 | Lamp Group-Signal; -Vims Service Indicator | 1 |
| 10***83 | Lens-Blue; (Vims Service Indicator) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
141-7106 Lubricator Gp-Air Motor
| 14***06 | Lubricator Group-Air Motor | 1 |
| 18***80 | Kit-Seal; (Air Motor Lubricator) | 0 |
144-7172 Module Gp-Vids/Vims Interface
| 14***72 | Module Group-Vids/Vims Interface | 1 |
| 9X***47 | Film-Identification; (Vids/Vims Interface Module) | 1 |
6v-6649 Module Gp-Vids/Vims Interface
| 14***72 | Module Group-Vids/Vims Interface | 1 |
| 6V***49 | Module Group-Vids/Vims Interface | 1 |
116-4850 Motor Gp-Prelubrication
| 03***96 | Connector; (Flared) | 1 |
| 11***50 | Motor Group-Prelubrication | 1 |
| 16***58 | Bracket As | 1 |
115-6482 Panel Gp-Circuit Breaker -Vims
| 11***82 | Panel Group-Circuit Breaker; -Vims | 1 |
| 11***40 | Harness As; (Vims)(Circuit Breaker) | 1 |
| 11***41 | Film-Instruction; (Fuse) | 1 |
2a-6491 Panel Gp-Circuit Breaker -Ems
| 11***09 | Film-Instruction; (Fuse) | 1 |
| 12***40 | Cover | 1 |
| 17***12 | Circuit Breaker As; (105-Ampere) | 1 |
100-3332 Sensor & Mtg Gp-Electric -Engine
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 10***32 | Sensor & Mtg Group-Electric; -Engine | 1 |
| 10***32 | Control Group-Electronic; (Coolant Temp Sensor) | 1 |
115-9168 Sensor & Mounting Gp -Fuel
| 11***68 | Sensor & Mounting Group; -Fuel | 1 |
| 11***41 | Guard | 1 |
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
6i-4226 Sensor & Mounting Gp -Turbocharger Inlet, Pressure
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 11***00 | Sensor Group-Pressure; -Turbo Inlet, Atmospheric Air | 1 |
| 4P***34 | Clip-Ladder; (00800 mm ) | 1 |
117-0055 Sensor & Mtg Gp-Electric -Engine
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 10***32 | Control Group-Electronic; (Coolant Temp Sensor) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
165-6634 Sensor Gp-Coolant Level
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***34 | Sensor Group-Coolant Level; (Water, Coolant)(Scac Expansion Tank) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
111-3794 Sensor Gp-Coolant Level -Aftercooler-Jacket Water
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***94 | Sensor Group-Coolant Level; -Coolant Loss-Aftercooler, Jacket Water | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
3e-7826 Sensor Gp-Exhaust Temperature
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 26***47 | Adapter | 1 |
| 26***49 | Sensor Group-Exhaust Temperature | 1 |
111-2094 Sensor Gp-Fuel Level -Ultrasonic
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***94 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 3E***77 | Wedge-Receptacle Lock; (4-Pin) | 1 |
8w-5331 Sensor Gp-Fuel Level -Float
| 4B***26 | Screw-Machine; (1/4-28x0.625-In) | 4 |
| 5P***29 | Seal-Rectangular | 1 |
| 8W***31 | Sensor Group-Fuel Level; -Float | 1 |
124-9325 Sensor Gp-Fuel Level
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
239-9957 Sensor Gp-Liquid Level
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 23***57 | Sensor Group-Liquid Level; -Coolant Loss | 1 |
156-9630 Sensor Gp-Liquid Level -Aftercooler-Jacket Water
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***30 | Sensor Group-Liquid Level; -Coolant Loss-Aftercooler, Jacket Water | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
3e-7666 Sensor Gp-Particle -Rh Final Drive
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 0 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
| 3E***66 | Sensor Group-Particle; -Rh Final Drive | 1 |
117-3359 Sensor Gp-Particle -Lh Final Drive
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 0 |
| 11***59 | Sensor Group-Particle; -Lh Final Drive | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
115-1380 Sensor Gp-Particle -Differential
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***80 | Sensor Group-Particle; -Differential | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
161-8906 Sensor Gp-Position -Accelerator Control
| 16***06 | Sensor Group-Position; -Accelerator Control | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
110-8190 Sensor Gp-Position -Accelerator Control
| 11***90 | Sensor Group-Position; (Rotary Position Sensor) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
198-8761 Sensor Gp-Position
| 19***61 | Sensor Group-Position; (Transmission Speed) | 1 |
| 7B***42 | Bolt, Hex. Hd., 1/4in.-20 N.C. X 1 1/4in. | 2 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
219-2384 Sensor Gp-Position
| 21***84 | Sensor Group-Position; (Rotary)(Engine Speed) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
3e-5400 Sensor Gp-Position
| 11***90 | Sensor Group-Position; (Rotary Position Sensor) | 1 |
| 3E***00 | Sensor Group-Position; -Accelerator Control | 1 |
118-8471 Sensor Gp-Position
| 11***71 | Sensor Group-Position; -Transmission Gear | 1 |
| 7B***42 | Bolt, Hex. Hd., 1/4in.-20 N.C. X 1 1/4in. | 2 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
6v-5828 Sensor Gp-Position -Transmission Gear
| 6V***28 | Sensor Group-Position; Control Gp-Electronic-Actual Gear Switch | 1 |
| 7B***42 | Bolt, Hex. Hd., 1/4in.-20 N.C. X 1 1/4in. | 2 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
126-7896 Sensor Gp-Position
| 12***96 | Sensor Group-Position; -Transmission Shift Lever | 1 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
| 8T***28 | Seal-Lip Type | 1 |
124-0328 Sensor Gp-Pressure -Payload
| 12***28 | Sensor Group-Pressure; -Payload | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
100-4311 Sensor Gp-Pressure
| 10***11 | Sensor Group-Pressure | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
111-8800 Sensor Gp-Pressure -Turbo Inlet, Atmospheric Air
| 11***00 | Sensor Group-Pressure; -Turbo Inlet, Atmospheric Air | 1 |
| 15***89 | Tube; (3cm) | 0 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
101-9980 Sensor Gp-Pressure -Payload Monitor
| 10***80 | Sensor Group-Pressure; -Payload Monitor | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
112-9778 Sensor Gp-Pressure -Differential Oil
| 11***78 | Sensor Group-Pressure; -Differential Oil | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
163-8492 Sensor Gp-Pressure -Atmospheric Air-Turbocharger Inlet
| 16***92 | Sensor Group-Pressure; -Turbocharger Inlet, Rh, Lh-Atmospheric Air | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
111-8802 Sensor Gp-Pressure -Engine Oil
| 11***02 | Sensor Group-Pressure; -Engine Oil | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
141-5746 Sensor Gp-Pressure -Brake Air
| 14***46 | Sensor Group-Pressure; -Air Start Lines | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
175-3186 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***86 | Sensor Group-Pressure; -Suspension Cylinder | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
143-9694 Sensor Gp-Pressure -Turbocharger Outlet
| 14***94 | Sensor Group-Pressure; -Turbocharger, Outlet | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
6v-1926 Sensor Gp-Pressure -Atmospheric Air
| 6V***26 | Sensor Group-Pressure; -Turbocharger Outlet-Atmospheric Air-Turbocharger Inlet | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
163-8511 Sensor Gp-Pressure -Brake Monitor
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 16***11 | Sensor Group-Pressure; -Brake Monitor | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
6v-1964 Sensor Gp-Pressure -Engine Oil
| 6V***64 | Sensor Group-Pressure; -Engine Oil | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
110-5864 Sensor Gp-Pressure -Brake Monitor
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 11***64 | Sensor Group-Pressure; -Brake Monitor | 1 |
126-1133 Sensor Gp-Speed
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***33 | Sensor Group-Speed; -Variable Speed | 1 |
3e-0487 Sensor Gp-Speed -Engine Timing
| 3E***87 | Sensor Group-Speed; -Timing-Engine Speed | 1 |
| 8T***42 | Tube-Heat Shrink; (3.2-mm Dia)(800-cm) | 0 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
5t-4494 Sensor Gp-Speed -Automatic Electronic Traction Aid-Wheel
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 16 |
| 1T***84 | Bolt-Socket Head; (5/16-18x1-In) | 4 |
| 20***74 | Sensor Group-Speed; (Wheel Speed) | 2 |
102-9029 Sensor Gp-Speed -Engine Timing
| 10***29 | Sensor Group-Speed; -Timing-Engine Speed | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 3 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
3t-0029 Sensor Gp-Speed -Transmission Output
| 14***78 | Sensor Group-Speed | 1 |
| 1B***67 | Ball Bearing | 1 |
| 2A***62 | Screw,Cap,Hexagon H Diode Pig Tail To Grd; (1/4-20x.625 In) | 4 |
118-3909 Sensor Gp-Temperature -Ambient Air
| 11***09 | Sensor Group-Temperature; -Ambient Air | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
128-5662 Sensor Gp-Temperature -Differential Oil
| 12***62 | Sensor Group-Temperature; -Differential Oil | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
100-3055 Sensor Gp-Temperature -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
6v-1923 Sensor Gp-Temperature -Coolant
| 6V***23 | Sensor Group-Temperature; -Coolant | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
119-5127 Starting Aid Gp-Ether
| 10***47 | Tube | 1 |
| 10***48 | Tube | 1 |
| 10***50 | Tube | 1 |
2a-6519 Starting Aid Gp-Ether
| 2A***19 | Starting Aid Group-Ether | 1 |
| 2A***89 | Plate As | 1 |
| 2A***02 | Plate As | 1 |
134-9893 Starting Aid Gp-Ether
| 13***62 | Fitting As | 2 |
| 13***93 | Starting Aid Group-Ether | 1 |
| 2A***89 | Plate As | 1 |
134-9894 Starting Aid Gp-Ether
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 11***89 | Hose As; (1550 mm) | 1 |
8w-9321 Starting Ar-Air -Turbine
| 8W***21 | Starting Ar-Air; -Turbine | 1 |
| 8W***22 | Control Group-Air Starting; -Turbine | 1 |
| 9Y***46 | Starting Motor Group-Air; -Turbine | 1 |
8w-4060 Starting Ar-Cold Weather
| 7C***08 | Wiring Group-Jacket Water Heater | 1 |
| 7X***08 | Film-Instruction-Attach To 8w***47 Box As | 1 |
| 8W***60 | Starting Ar-Cold Weather | 1 |
4w-6634 Starting Motor Gp-Air
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 1 |
7c-3372 Starting Motor Gp-Air
| 03***17 | Washer-Spring | 2 |
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 1 |
| 11***99 | Housing-Motor | 1 |
4w-6633 Starting Motor Gp-Air -Vane
| 03***17 | Washer-Spring | 2 |
| 11***99 | Housing-Motor | 1 |
| 1L***97 | Ring-Snap; (External) | 1 |
9y-0646 Starting Motor Gp-Air -Turbine
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 11***87 | Starting Motor Group-Air; (Turbine) | 1 |
| 12***57 | Kit-Overhaul; (Air Starting Motor) | 1 |
105-4325 Starting Motor Gp-Air -Turbine
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 10***24 | Starting Motor Group-Air; (Turbine) | 1 |
| 10***25 | Starting Motor Group-Air; -Turbine | 1 |
105-8827 Suppressor Gp-Electronic -Air Conditioner
| 10***27 | Suppressor Group-Electronic; -Air Conditioner Compressor | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
8c-5681 Switch As-Limit -Xmsn Neutralizer
| 8C***78 | Switch As-Limit | 1 |
| 8C***81 | Switch As-Limit; -Transmission Neutralizer | 1 |
| 8C***76 | Head-Switch Actuator | 1 |
9x-7781 Switch Gp-Bypass -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 4B***43 | Nut,Plain,Hexagon Plate Mtg | 2 |
| 4B***63 | Washer; (4.7x11x1.2-mm Thk) | 2 |
164-7577 Switch Gp-Bypass -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
171-8710 Switch Gp-Flow
| 17***10 | Switch Group-Flow; -Coolant | 1 |
9x-3040 Switch Gp-Flow -Coolant
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
123-2993 Switch Gp-Liquid Level -Axle Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***93 | Switch Group-Liquid Level; -Engine Oil-Ster, Fan Dr Oil (Engine On)-Torque Converter Oil-Torque Conv Oil (Low, Cold)-Front, Rear Engine Oil-Steering Oil, Engine Off-Torque Conv Oil (Low, Hot)-Auxiliary Coolant-Brake Oil, Hoist-Engine Coolant | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
7e-8098 Thermocouple Gp
| 5N***26 | Connector; Adapter-.25in Pipe Thread | 1 |
| 6K***79 | Clip; (4.76mm Id) | 1 |
| 7E***30 | Thermocouple | 1 |
125-5839 Wiring Gp-Cab -Differential Oil Filter/Ems
| 10***66 | Bezel | 1 |
| 12***39 | Wiring Group-Cab; -Differential Oil Filter/Ems | 1 |
| 12***55 | Control Group-Electronic; -Cat Monitoring System | 1 |
2a-7103 Wiring Gp-Cab -Payload/Ems
| 10***53 | Bracket As | 1 |
| 2A***03 | Wiring Group-Cab; -Payload/Ems | 1 |
| 2A***32 | Harness As; (Payload, Cab) | 1 |
131-7117 Wiring Gp-Cab -Rear Axle Oil Cooler
| 12***50 | Plate As | 1 |
| 12***95 | Harness As; (Ident Code)(Rax Oil Clr/Vims) | 1 |
| 13***88 | Harness As; (Ident Code)(Rax Oil Clr/Ems) | 1 |
2a-6506 Wiring Gp-Cab -Ems
| 01***42 | Screw-Machine; (6/32x1-In) | 2 |
| 10***58 | Flasher As; (24-Volt) | 1 |
| 11***49 | Harness As-Cab; (Aeta) | 1 |
115-6473 Wiring Gp-Cab -Vims
| 10***11 | Sensor Group-Pressure | 1 |
| 10***58 | Film-Instruction; (Console) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
125-4233 Wiring Gp-Cab -Differential Oil Filter/Vims
| 10***66 | Bezel | 1 |
| 12***33 | Wiring Group-Cab; -Differential Oil Filter/Vims-Vims | 1 |
| 12***55 | Control Group-Electronic; -Cat Monitoring System | 1 |
255-8769 Wiring Gp-Cab
| 10***58 | Flasher As; (24-Volt) | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 18 |
| 11***82 | Panel Group-Circuit Breaker; -Vims | 1 |
7e-5537 Wiring Gp-Electronic Control
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 19 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
110-2753 Wiring Gp-Engine -Vims
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 11***53 | Wiring Group-Engine; -Vims | 1 |
121-4129 Wiring Gp-Engine
| 09***52 | Bar | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 18 |
132-2168 Wiring Gp-Engine -Shutter
| 13***68 | Wiring Group-Engine; -Shutter | 1 |
| 13***29 | Harness As; (Fan Clutch) | 1 |
| 13***57 | Cover | 1 |
7c-1108 Wiring Gp-Jacket Water Heater
| 4D***94 | Clip-- Compressor Clutch Wire To Compressor Body | 14 |
| 7C***08 | Wiring Group-Jacket Water Heater | 1 |
| 7C***07 | Wire As-Heater | 4 |
117-1354 Wiring Gp-Prelubrication -Engine Prelube-Cab
| 11***54 | Wiring Group-Prelubrication; -Engine Prelube-Cab | 1 |
| 11***55 | Harness As; (Engine Prelube) | 1 |
| 3T***48 | Clip Assembly - Housing Plug To Housing Recp. | 1 |
8w-4768 Wiring Gp-Sensor -Payload/Ems
| 11***39 | Spacer; (10.5x18x21-mm Thk) | 2 |
| 4D***94 | Clip-- Compressor Clutch Wire To Compressor Body | 1 |
| 4K***77 | Clip-On Side & Top Of Rear Of Engine For | 3 |
Engine Arrangement
121-5789 Engine Ar
| 10***14 | Fumes Disposal Group | 1 |
| 10***07 | Cooler Group-Engine Oil | 1 |
| 10***31 | Cover Group-Valve Mechanism | 14 |
7e-9080 Engine Ar
| 10***32 | Sensor & Mtg Group-Electric; -Engine | 1 |
| 10***14 | Fumes Disposal Group | 1 |
| 10***07 | Cooler Group-Engine Oil | 1 |
Frame And Body
8x-1072 Body & Canopy As
| 2B***18 | Bolt 7.5 In. (1.91 Dm) Long | 16 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 16 |
| 8W***67 | Guard As-Lh | 1 |
8x-1073 Body & Canopy As -Heavy Duty
| 2B***18 | Bolt 7.5 In. (1.91 Dm) Long | 16 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 16 |
| 8W***67 | Guard As-Lh | 1 |
8x-1074 Body & Canopy As -Taconite
| 2B***18 | Bolt 7.5 In. (1.91 Dm) Long | 16 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 16 |
| 8W***67 | Guard As-Lh | 1 |
125-6229 Body & Canopy As
| 11***12 | Guard As | 2 |
| 12***29 | Body & Canopy As | 1 |
| 19***56 | Plate-Serial Number; (Body, Model, Pin)(Dual Slope Body & Canopy As) | 1 |
5t-6046 Cable Gp-Retaining -Truck Body
| 10***14 | Coupler | 1 |
| 1D***43 | Bolt (5-1/2 In. Long 1 In. Dia.); Platform To Support Assembly | 2 |
| 2B***74 | Pin-Clevis | 1 |
5t-1016 Walkway Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 12 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 5 |
| 1D***17 | Nut-Plate And Angle Assembly To Hydraulic And Fuel Tanks; Nut Plate And Angle Assembly To Hydraulic And Fuel Tanks | 4 |
2a-6523 Cowling Gp
| 11***82 | Cowling As | 1 |
| 2A***23 | Cowling Group | 1 |
| 2A***92 | Cover As | 1 |
115-2108 Extension As -Tail
| 11***08 | Extension As; -Tail | 1 |
8x-1071 Extension As-Tail
| 8X***71 | Extension As-Tail | 1 |
8x-0974 Extension As-Tail -Heavy Duty
| 8X***74 | Extension As-Tail; -Heavy Duty | 1 |
5t-1070 Fender Gp
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 5 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 9 |
2a-6524 Frame Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 11***13 | Support As | 1 |
5t-1031 Guard Gp-Drive Shaft
| 21***50 | Guard As | 1 |
| 21***52 | Guard | 1 |
| 2A***31 | Guard As | 1 |
8w-7626 Guard Gp-Platform
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 1 |
| 1D***17 | Nut-Plate And Angle Assembly To Hydraulic And Fuel Tanks; Nut Plate And Angle Assembly To Hydraulic And Fuel Tanks | 1 |
156-3482 Guard Gp-Power Train Filter
| 14***59 | Plate | 1 |
| 15***70 | Guard As; (Rear Axle Lube Filter) | 1 |
| 15***42 | Plate | 1 |
5t-1021 Hood Gp-Truck
| 0T***83 | Washer--Junction Box To Rear Support | 1 |
| 1A***99 | Dowel | 1 |
| 1D***64 | Grab Iron) | 1 |
2a-6526 Ladder Gp
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 10***08 | Support-Step; (Rubber) | 4 |
| 11***44 | Plate | 4 |
8w-8206 Liner Gp-Body -Taconite
| 5T***20 | Plate | 2 |
| 5T***39 | Plate | 1 |
| 5T***40 | Plate | 2 |
8w-7880 Liner Gp-Body
| 5T***20 | Plate | 2 |
| 5T***39 | Plate | 1 |
| 5T***40 | Plate | 2 |
115-2109 Liner Gp-Extension -Tail
| 11***09 | Liner Group-Extension; -Tail | 1 |
| 11***27 | Plate | 2 |
| 11***28 | Plate | 1 |
8x-0987 Liner Gp-Extension -Tail
| 8X***22 | Plate | 1 |
| 8X***24 | Plate | 2 |
| 8X***87 | Liner Group-Extension; -Tail | 1 |
8x-8270 Lubrication Gp-Automatic
| 00***83 | Nipple-Pipe; (Hexagon) | 6 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 5 |
8w-7903 Mirror Gp-Rear View
| 3B***05 | Pin Split Cotter | 2 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 2 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 4 |
8x-1420 Mounting Gp-Truck Body
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 10 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 59 |
8w-4594 Pump Gp-Lubrication -Automatic
| 5T***00 | Pump Group-Lubrication; -Automatic Lubrication | 1 |
| 8W***94 | Pump Group-Lubrication; -Automatic Lubrication | 1 |
5t-7800 Pump Gp-Lubrication -Automatic
| 00***10 | Tee; (Pipe) | 1 |
| 03***46 | Elbow | 1 |
| 10***51 | Bracket | 1 |
7i-4798 Sideboard As-Body
| 7I***98 | Sideboard As-Body | 1 |
118-0228 Sidewall Cap As-Body
| 11***28 | Sidewall Cap As-Body | 1 |
4t-5182 Suspension Gp-Front
| 10***05 | Housing As | 1 |
| 17***07 | Plate | 1 |
| 1D***39 | Bolt- Rear Support To Frame | 40 |
5t-4465 Suspension & Mtg Gp-Front
| 03***67 | Ring; (Back Up) | 2 |
| 03***39 | Seal-O-Ring (Id=9.25mm) | 2 |
| 11***61 | Seal-O-Ring | 2 |
6e-1921 Suspension Gp-Front
| 23***28 | Valve As; (Hydraulic Cylinder) | 2 |
| 23***04 | Cap | 1 |
| 23***05 | Core-Valve | 1 |
5t-4466 Suspension Gp-Rear
| 03***67 | Ring; (Back Up) | 2 |
| 03***39 | Seal-O-Ring (Id=9.25mm) | 2 |
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 12 |
4t-4844 Suspension Gp-Rear
| 10***04 | Head | 1 |
| 1A***05 | Bolt (5 In. Long); (5/8-11x5-In) | 4 |
| 1D***88 | Bolt 10.8 cm (4.25 In.) Long | 18 |
106-1801 Suspension Gp-Rear
| 10***01 | Suspension Group-Rear | 1 |
| 15***77 | Head | 1 |
| 18***97 | Bearing | 2 |
2a-6528 Tread Gp-Non-Skid -Chassis
| 2A***28 | Tread Group-Non-Skid; -Chassis | 1 |
| 2A***79 | Plate | 4 |
| 5P***97 | Tread-Anti-Skid (Order By The Meter) | 0 |
141-2107 Valve Gp-Lube Distribution -2-Injector
| 14***07 | Valve Group-Lube Distribution; -2-Injector | 1 |
| 19***54 | Packing | 2 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 2 |
8w-2597 Valve Gp-Lube Distribution -4-Injector
| 19***54 | Packing | 4 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 4 |
| 8W***55 | Kit-Injector; (Lube Valve) | 1 |
5t-5009 Valve Gp-Lube Distribution -3-Injector
| 19***54 | Packing | 1 |
| 5T***09 | Valve Group-Lube Distribution; -3-Injector-Steering Cyl, Linkage, Rh, Lh-Hoist, Rear Susp Cyl, Rh, Lh-Front Susp, Steer Cyl, Rh, Lh | 1 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 3 |
5t-5010 Valve Gp-Lube Distribution -5 Injector
| 19***54 | Packing | 5 |
| 5T***10 | Valve Group-Lube Distribution; -5-Injector | 1 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 5 |
Fuel System
7w-5397 Drive Gp-Tachometer
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 8 |
6i-4470 Filter Gp-Fuel
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 5 |
| 1R***55 | Filter As-Fuel; (Advanced Efficiency) | 2 |
2w-6071 Filter Gp-Primary Fuel
| 1L***69 | Ring-Retaining | 1 |
| 2H***29 | Ring - Retaining External | 1 |
| 2J***57 | Packing,Preformed Screw Assembly Part Of Kit P/N 5r***25 | 1 |
7e-8836 Injector Gp-Fuel
| 7E***36 | Injector Group-Fuel | 1 |
| 8J***25 | Seal-O-Ring | 1 |
| 9X***35 | Seal-O-Ring | 1 |
5t-4483 Lines Gp-Fuel
| 00***01 | Elbow (To Serial No 1md225) | 2 |
| 03***44 | Elbow)Hose Connection From Check | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
7e-9215 Lines Gp-Fuel Injection
| 00***81 | Tee-Union; (Flared 37-Deg) | 1 |
| 03***49 | Elbow; (90 Degree, 37 Degree Flared) | 3 |
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
7e-9090 Pump Gp-Fuel Injection
| 7C***15 | Plug | 1 |
| 7E***80 | Clamp-Injector | 1 |
| 7E***36 | Injector Group-Fuel | 1 |
8n-7763 Pump Gp-Fuel Priming
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 1 |
| 1H***71 | Seal 20.22 mm(.796 In.)I. D. | 1 |
| 2W***05 | Pump As-Fuel Priming | 1 |
1n-4478 Pump Gp-Fuel Transfer
| 11***96 | Seal-Lip; (Outer) | 1 |
| 11***97 | Seal-Lip; (Inner) | 1 |
| 12***37 | Shaft As-Drive | 1 |
8n-6151 Pump Gp-Fuel Transfer
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
| 1N***78 | Pump Group-Fuel Transfer; (1-Section Gear) | 1 |
| 1N***36 | Coupling-Drive | 1 |
151-3177 Tank As-Fuel
| 15***77 | Tank As-Fuel | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
| 3B***51 | Plug (Use Without Low Temperature Sensor) | 1 |
150-9548 Tank As-Fuel
| 15***48 | Tank As-Fuel | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
| 3B***51 | Plug (Use Without Low Temperature Sensor) | 1 |
133-3419 Tank Gp-Fuel -3790-L (1001-Us Gal)
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 6 |
| 10***81 | Block | 1 |
| 11***07 | Bracket As | 1 |
115-2012 Tank Gp-Fuel -Vims
| 03***27 | Hose As | 1 |
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 6 |
| 11***12 | Tank Group-Fuel; -Vims | 1 |
8x-0910 Tank Gp-Fuel
| 03***27 | Hose As | 1 |
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 6 |
| 1D***14 | Bolt--Front Support To Frame | 2 |
133-3418 Tank Gp-Fuel -Vims
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 6 |
| 10***81 | Block | 1 |
| 11***41 | Guard | 1 |
115-9169 Tank Gp-Fuel
| 03***27 | Hose As | 1 |
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 6 |
| 0S***27 | Bolt -114.30 mm(4.50 In.) Long | 1 |
2g-9000 Valve As-Tank -Fast Fill Fuel
| 2G***00 | Valve As-Tank | 1 |
Hydraulic System
9t-5210 Valve Gp-Relief -Rear Brake Oil Cooler
| 6J***80 | Spring | 1 |
| 6K***07 | Seal-O-Ring; (43.69mm Id) | 1 |
| 8B***24 | Shim .81mm(.032in)Thk; .82mm(.032in.)Thk. | 9 |
6e-1155 Valve Gp-Relief -Pilot Operated Hoist
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4J***22 | Seal-Interface Between 3rd & Tilt Valve | 1 |
| 4J***22 | Washer,Pump,Hydraul Cover Part Of Kit P/N 4j***80 | 1 |
3g-6849 Valve Gp-Relief -Hoist Control
| 2J***66 | Shim .1270 mm(.005 In.) Thick | 7 |
| 2J***57 | Body-Valve | 1 |
| 2J***89 | Springs | 1 |
5t-4469 Cylinder & Mtg Gp-Hoist
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 1D***15 | Bolt 139.70 mm(5.50 In.) Long | 6 |
| 23***05 | Pin As | 2 |
9t-2807 Cylinder Gp-Hoist
| 11***99 | Ring-Backup | 1 |
| 16***78 | Head | 1 |
| 1D***27 | Bolt,Machine Head Mtg Uoc:Bsv,Bsx | 10 |
2a-6516 Drive Gp-Pump -Steering-Hoist, Rear Brake Cooling-Transmission
| 2A***16 | Drive Group-Pump; -Auxiliary Hoist-Steering, Transmission-Rear Brake Cooling | 1 |
| 2A***46 | Drive Group-Pump; -Auxiliary Hoist-Steering, Transmission-Rear Brake Cooling | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 4 |
2a-6546 Drive Gp-Pump -Steering-Hoist, Rear Brake Cooling-Transmission
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 16 |
| 13***97 | Seal-Lip Type | 1 |
| 1H***74 | Dowel (.5" Long) | 2 |
5t-4479 Lines Gp-Hoist
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 14***64 | Hose As | 1 |
| 14***90 | Block | 1 |
105-4310 Lines Gp-Hydraulic Fan -Variable Speed
| 03***33 | Seal-O-Ring; (12.42mm Id) | 4 |
| 06***38 | Seal-O-Ring; (7.65 mm Id) | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
125-5861 Lines Gp-Hydraulic Oil Cooler -Rear Brakes
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 1 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 12 |
5t-1026 Lines Gp-Hydraulic Oil Cooler -Tc, Hoist, Brake
| 10***31 | Lug; (3/8-16x1-In) | 3 |
| 10***58 | Elbow | 2 |
| 10***70 | Valve Group-Diverter; -Tc, Front Brake Cooling | 1 |
6e-2308 Manifold Gp-Hydraulic -Hoist
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4J***33 | Seal Fuel Injection Pump | 1 |
| 6E***29 | Manifold | 1 |
5t-4463 Mounting Gp-Hydraulic Tank
| 10***00 | Deflector | 2 |
| 10***01 | Deflector | 1 |
| 10***04 | Support As | 1 |
5t-3229 Pump Gp-Gear -Hoist, Rear Brake Cooling
| 3D***90 | Stud-Taperlock; (1/2x13x1.97 In Oal) | 4 |
| 4T***06 | Pump Group-Gear; -Hoist, Rear Brake Cooling | 1 |
| 5F***99 | Packing,Preformed Cover Mtg; Part Of Kit P/N 5r***25 Part Of Kit P/N 8s***57 | 1 |
4t-2606 Pump Gp-Gear -Hoist, Rear Brake Cooling
| 08***93 | Ring-Retaining | 1 |
| 3E***24 | Stud | 8 |
| 3G***09 | Coupling | 1 |
6e-6412 Pump Gp-Piston -Steering
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
6e-5650 Pump Gp-Piston -Steering
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
6e-4216 Rotating Gp-Pump -Steering
| 6E***16 | Rotating Group-Pump; -Implement, Steering | 1 |
| 6E***17 | Plate-Limiter | 2 |
| 6E***18 | Plate-Spacer | 2 |
6e-1349 Screen Gp-Hydraulic -Tc, Front Brake Cooling
| 2J***56 | Ring-Retaining | 1 |
| 2S***39 | Seal-O-Ring | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
5t-1033 Shaft Gp-Pump Drive
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 8 |
| 2K***71 | Locknut; (1-14-Thd) | 1 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 8 |
4t-4147 Tank Gp-Hydraulic & Xmsn
| 00***28 | Angle | 2 |
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 130 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
8x-8014 Universal Joint Gp-Pump Drive
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 8 |
| 10***87 | Spider And Bearing | 2 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 8 |
4t-7345 Valve Gp-Control -Hoist
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0T***20 | Bolt (1.25 In. Long X .438 In. Dia.) | 2 |
| 2J***36 | Disk,Valve Uoc:Bsv,Bsx | 1 |
9t-9898 Valve Gp-Counterbalance -Hoist
| 6E***58 | Valve Group-Counterbalance; (Hoist) | 1 |
| 6E***83 | Kit-Seal; (Counterbalance Valve)(Hoist) | 1 |
| 6E***84 | Block | 1 |
6e-2235 Valve Gp-Diverter -Hoist
| 1U***22 | Bearing-Sleeve; (12.65mm Id) | 1 |
| 1U***23 | Plug Assem. | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 4 |
100-4181 Valve Gp-Pump Control -Steering Pump
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 10***81 | Valve Group-Pump Control; -Steering Pump | 1 |
Lubrication System
101-0838 Breather Gp -Crankcase
| 03***31 | Seal-O-Ring | 2 |
| 10***38 | Breather Group; -Crankcase | 1 |
| 10***99 | Cover As | 2 |
7e-9082 Breather Gp -Crankcase
| 03***31 | Seal-O-Ring | 2 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 8 |
| 2W***72 | Seal-O-Ring; (221.62mm Id) | 2 |
2w-3701 Filler Gp-Engine Oil
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 11***24 | Tube As | 1 |
| 13***46 | Cap As-Engine Oil Filler | 1 |
123-6884 Filter Gp-Engine Oil
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 26 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 20 |
9y-8901 Filter Gp-Engine Oil
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 26 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 20 |
100-6014 Fumes Disposal Gp
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
| 10***14 | Fumes Disposal Group | 1 |
7c-6102 Gauge Gp-Oil Level (Dipstick)
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 12***62 | Gauge As-Oil Level; (Dipstick) | 1 |
| 12***64 | Tube As-Oil Gauge | 1 |
9y-8902 Lines Gp-Engine Oil
| 06***56 | Seal-O-Ring | 4 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
123-6919 Lines Gp-Fan Drive -Variable Speed
| 03***33 | Seal-O-Ring; (12.42mm Id) | 2 |
| 06***38 | Seal-O-Ring; (7.65 mm Id) | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
117-0446 Lines Gp-Prelubrication
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 09***04 | Terminal-Ring; (2-Ga, 3/8-In Screw) | 2 |
7e-5337 Lines Gp-Turbocharger Oil
| 00***81 | Tee-Union; (Flared 37-Deg) | 2 |
| 03***49 | Elbow; (90 Degree, 37 Degree Flared) | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 12 |
135-8770 Manifold Gp-Control -Fan Drive-Variable Speed
| 13***70 | Manifold Group-Control; -Fan Drive-Variable Speed | 1 |
| 13***71 | Valve Group-Solenoid | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 3 |
8x-8360 Oil Change Gp-High Speed
| 00***43 | Elbow | 1 |
| 03***74 | Hose As; (127cm) | 1 |
| 03***65 | Elbow (45 Degrees) | 1 |
116-7153 Pump & Motor Gp-Prelubrication
| 11***53 | Pump & Motor Group-Prelubrication | 1 |
| 15***58 | Connector | 1 |
| 15***59 | Connector | 1 |
106-9872 Pump Gp-Engine Oil -2-Section Gear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 9 |
| 10***67 | Shaft As-Idler; (12-Teeth) | 2 |
8n-6152 Pump Gp-Engine Oil -2-Section Gear
| 29***87 | Seal-O-Ring | 1 |
| 4P***38 | Pump Group-Engine Oil; -2-Section Gear | 1 |
| 4S***82 | Bolt 7.25 In. (18.42 cm) Long | 3 |
4p-5638 Pump Gp-Engine Oil -2-Section Gear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 9 |
| 11***49 | Gasket | 1 |
106-9873 Pump Gp-Engine Oil -2-Section Gear
| 10***72 | Pump Group-Engine Oil; -2-Section Gear | 1 |
| 10***73 | Pump Group-Engine Oil; -2-Section Gear | 1 |
| 1B***73 | Bolt 8.50 In.(215.90 mm) Long | 3 |
8n-2012 Pump Gp-Scavenge -Front Sump
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
144-8267 Pump Gp-Scavenge -Front Sump
| 05***79 | Washer; (13.5x44.45x10-mm Thk) | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
1w-8508 Pump Gp-Scavenge -Front Sump
| 05***79 | Washer; (13.5x44.45x10-mm Thk) | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
124-2725 Valve & Mtg Gp-Fan Drive -Variable Speed
| 12***25 | Valve & Mtg Group-Fan Drive; -Variable Speed | 1 |
| 12***97 | Valve Group-Solenoid | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 3 |
124-3497 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
| 11***03 | Kit-Seal; (Modulating Valve) | 1 |
135-8771 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***03 | Kit-Seal; (Modulating Valve) | 1 |
| 12***74 | Spacer-Special; (16.5x34.42x11.5-mm Thk) | 1 |
Machine Arrangement
125-9283 Chassis Ar -European Market
| 12***41 | Tank-Air | 1 |
| 12***83 | Chassis Ar; -European Market | 1 |
125-6238 Machine Ar -European Market
| 12***38 | Machine Ar; -European Market | 1 |
| 12***83 | Chassis Ar; -European Market | 1 |
Operator Station
249-2969 Adjuster Gp-Seat
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
173-1029 Adjuster Gp-Seat
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
173-1028 Adjuster Gp-Seat
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
2a-6502 Air Conditioner & Mounting Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 10***46 | Air Conditioner Group | 1 |
| 1B***04 | Nut-Full | 1 |
108-4546 Air Conditioner Gp
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 1 |
| 10***46 | Air Conditioner Group | 1 |
| 11***35 | Case As | 1 |
3e-7711 Air Conditioner Gp
| 1M***30 | Nut And Lock Assem.; (No. 10-32) | 4 |
| 2G***15 | Bracket | 2 |
| 2L***17 | Screw-Machine; (10-32x7.9-mm) | 2 |
8y-5904 Armrest Gp
| 3E***12 | Nut-Square; (3/8-16-Thd) | 1 |
| 6V***87 | Screw-Pan Head; (10-24x1-In) | 4 |
| 8S***03 | Ring-Retaining | 1 |
169-5423 Armrest Gp -Rh
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 15***51 | Bracket | 1 |
151-2702 Armrest Gp -Rh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 15***00 | Bracket As | 1 |
2a-6525 Cab Ar -Ems
| 11***77 | Hose Group-Air; -Gauge-Brake Pressure | 1 |
| 11***91 | Harness As-Wiring; (789b)(Arc) | 1 |
| 12***09 | Valve Group-Air Control; -Exhaust Bypass | 1 |
115-6499 Cab Ar
| 11***99 | Cab Ar | 1 |
| 2A***25 | Cab Ar; -Ems | 1 |
| 2A***29 | Battery & Wiring Group; -Chassis/Ems | 1 |
114-9460 Cab Ar -Vims
| 11***55 | Cab Group; -Vims | 1 |
| 11***60 | Cab Ar; -Vims | 1 |
| 11***64 | Panel Group-Instrument; -Keypad, Speedometer, Tach | 1 |
260-1830 Cab Ar
| 11***64 | Panel Group-Instrument; -Keypad, Speedometer, Tach | 1 |
| 11***87 | Lamp Group-Signal; -Payload-Cab | 1 |
| 11***03 | Control Group-Vids/Vims Main | 1 |
256-2442 Cab Gp
| 1H***44 | Lockwasher (Bracket To Cab) | 3 |
| 1V***45 | Grommet | 2 |
| 1V***46 | Ring-Snap | 2 |
2a-6501 Cab Gp -Ems
| 10***14 | Cab As | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 3 |
| 1V***45 | Grommet | 2 |
114-9455 Cab Gp -Vims
| 10***01 | Cover; (Lh) | 2 |
| 10***38 | Dash As | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 80 |
255-8766 Cab Gp
| 11***58 | Washer; (6.5x17x1-mm Thk) | 73 |
| 12***04 | Plate | 1 |
| 14***69 | Washer; (7.5x40x3-mm Thk) | 5 |
2a-6498 Cab Gp -Ems
| 10***01 | Cover; (Lh) | 2 |
| 11***93 | Dash As | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 80 |
255-8767 Cab Gp
| 25***67 | Cab Group | 1 |
| 26***83 | Panel As-Cab | 1 |
| 26***84 | Panel As-Cab; (Lh) | 1 |
114-9458 Cab Gp -Vims
| 09***37 | Spacer; (12-mm Thk) | 7 |
| 11***58 | Cab Group; -Vims | 1 |
| 11***59 | Cab As | 1 |
143-2514 Cleanout Gp-Cab
| 14***14 | Cleanout Group-Cab | 1 |
| 15***27 | Gun-Air Jet | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
7n-4297 Compressor Gp-Refrigerant
| 01***11 | Screw; (10-16x0.25-In) | 3 |
| 14***97 | Valve As-Relief; (Refrigerant Compressor) | 1 |
| 1H***71 | Seal 20.22 mm(.796 In.)I. D. | 2 |
2w-0216 Compressor Gp-Refrigerant
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
3e-3768 Compressor Gp-Refrigerant
| 01***11 | Screw; (10-16x0.25-In) | 3 |
| 14***97 | Valve As-Relief; (Refrigerant Compressor) | 1 |
| 1P***56 | Plate | 1 |
4w-4033 Condenser & Mtg Gp-Refrigerant
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 4 |
| 4W***33 | Condenser & Mounting Group | 1 |
| 4W***85 | Plate | 2 |
255-8770 Console Gp-Operator
| 11***58 | Washer; (6.5x17x1-mm Thk) | 15 |
| 12***65 | Knob; (Black Plastic) | 1 |
| 12***96 | Sensor Group-Position; -Transmission Shift Lever | 1 |
257-6990 Control Gp-Hoist
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 1B***06 | Key-Woodruff | 2 |
| 1F***31 | Collar | 1 |
5t-6546 Control Gp-Hoist -Chassis
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 8 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 2 |
5t-6716 Control Gp-Hoist -Cab
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 10***72 | Lever; (Bed Control) | 1 |
| 1B***06 | Key-Woodruff | 2 |
158-8717 Control Gp-Monitor -Cat Monitoring System
| 15***17 | Control Group-Monitor; -Cat Monitoring System | 1 |
9x-6846 Control Gp-Monitor -Payload
| 10***85 | Battery; (Lithium)(Internal Backup) | 1 |
| 18***78 | Control Group-Payload Electronic | 1 |
| 8C***78 | Seal-O-Ring | 1 |
9x-5308 Display Gp-Payload Monitor -Operator Display
| 5P***66 | Terminal-Ring; (18-Ga To 22-Ga, No. 6 Screw) | 6 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 4 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 4 |
9x-6847 Display Gp-Payload Monitor -Operator
| 8C***81 | Film-Instruction; (Payload Measurement) | 1 |
| 9X***08 | Control Group-Payload Electronic; -Operator Display | 1 |
| 9X***47 | Control Group-Payload Electronic; -Operator Display | 1 |
2a-6518 Control Gp-Retarder -Automatic
| 2A***18 | Control Group-Retarder; -Automatic | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
| 3E***78 | Valve & Mounting Group; -Automatic Retarder-Retarder Control | 1 |
135-6568 Control Gp-Retarder -Automatic
| 00***33 | Tee-Pipe | 1 |
| 12***61 | Valve & Mtg Group-Brake; -Automatic Retarder | 1 |
| 13***68 | Control Group-Retarder; -Automatic-Hydraulic | 1 |
127-4765 Control Gp-Retarder -Automatic
| 12***61 | Valve & Mtg Group-Brake; -Automatic Retarder | 1 |
| 12***65 | Control Group-Retarder; -Automatic | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
2a-6517 Control Gp-Retarder -Automatic
| 12***16 | Harness As-Cab; (Arc-Cab) | 1 |
| 2A***17 | Control Group-Retarder; -Automatic-Electrical | 1 |
| 2A***21 | Plate | 1 |
5t-6545 Control Gp-Transmission
| 12***96 | Sensor Group-Position; -Transmission Shift Lever | 1 |
| 3L***40 | Bolt-Hex Socket Head; (10-24x.750in) | 2 |
| 4J***33 | Seal Fuel Injection Pump | 4 |
165-8682 Control Gp-Unprgmed Monitor -Vids/Vims Main Module
| 10***85 | Battery; (Lithium)(Internal Backup) | 1 |
| 13***20 | Film-Identification; (Vids, Vims Main Module) | 1 |
| 16***82 | Control Group-Unprgmed Monitor; -Vids/Vims Main Module | 1 |
226-8720 Cover Gp-Seat Belt
| 22***85 | Cover-Front | 1 |
| 22***86 | Cover As; (Rear) | 1 |
| 22***20 | Cover Group-Seat Belt | 1 |
8x-8090 Door Gp-Cab -Lh
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 4 |
| 10***87 | Escutcheon | 1 |
251-6755 Door Gp-Cab
| 11***58 | Washer; (6.5x17x1-mm Thk) | 9 |
| 12***65 | Knob; (Black Plastic) | 1 |
| 12***73 | Handle As-Pull | 1 |
251-2466 Door Gp-Cab
| 03***29 | Bolt; (1/4-20x0.347-In) | 11 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 10***88 | Glass As-Window | 1 |
8w-4170 Door Gp-Cab -Rh
| 12***65 | Handle As; (Rh Door)(Outside) | 1 |
| 17***94 | Seal; (418-cm) | 0 |
| 2G***29 | Hinge | 1 |
5t-6163 Door Gp-Cab -Lh
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 6 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 4 |
2a-6774 Drive Gp-Tachograph
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 2A***74 | Drive Group-Tachograph; -Chassis | 1 |
8y-5874 Extension Gp-Backrest -Cloth
| 8Y***74 | Extension Group-Backrest; Backrest Extension Group | 1 |
| 8Y***77 | Pan As-Extension | 1 |
| 8Y***43 | Cushion Kit; (Consists Of Fastener, Cushion Assem.) | 1 |
155-6003 Gauge Gp-Coolant Temperature -Translucent Face
| 15***03 | Gauge Group-Coolant Temperature; -Translucent Face | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
4w-0483 Gauge Gp-Coolant Temperature
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
| 4W***83 | Gauge Group-Coolant Temperature; (Eng. Coolant)(24 V) | 1 |
4w-2067 Gauge Gp-Oil Temperature
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
| 4W***67 | Gauge Group-Oil Temperature | 1 |
155-6002 Gauge Gp-Oil Temperature -24 Volt
| 15***02 | Gauge Group-Oil Temperature; -24 Volt | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
5t-0857 Horn Gp-Air -Cab
| 3D***87 | Fitting; - Use When Relocating Air Override Valve To R.H. Side Panel If Equipped With Attachment Parking Brake Control | 1 |
| 3D***43 | Valve As-Horn | 1 |
| 4B***56 | Screw-Machine; (1/4-20x0.75-In) | 2 |
5t-1071 Horn Gp-Air -Chassis
| 2G***33 | Bracket | 1 |
| 2H***23 | Grommet (1.375" Inside Diameter) | 1 |
| 2H***24 | Grommet (.875" Inside Diameter) | 1 |
5d-6998 Horn Gp-Air -Chassis
| 15***87 | Cover | 2 |
| 2G***64 | Kit-Diaphragm; (Air Horn) | 2 |
| 4B***75 | Washer (1.75 In. Outside Diameter) | 1 |
108-4588 Housing Gp-Seat Suspension
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
8y-6862 Housing Gp-Seat Suspension
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
| 8Y***45 | Kit-Suspension Knob; (Height Adjustment)(Suspension Seat) | 1 |
175-7468 Housing Gp-Seat Suspension
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
106-1773 Kit-Conversion-Seat
| 10***73 | Kit-Conversion-Seat | 1 |
2a-6531 Lines Gp-Air Conditioner
| 10***39 | Bracket | 1 |
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 1 |
| 11***34 | Switch As-Pressure; (A/C Clutch Solenoid) | 1 |
5t-4484 Lines Gp-Heater
| 00***89 | Valve As-Drain | 2 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 10 |
| 5P***67 | Hose (.625 In. I.D.)17.02 Dm(67 In.) | 2 |
8x-2803 Lines Gp-Window Washer -Window
| 14***95 | Hose; (650-cm Each) | 0 |
| 1P***78 | Clamp; (Hose) | 1 |
| 2V***16 | Clip; (9.52mm Id) | 4 |
149-2357 Module Gp-Message Center -Vids-Vids, Vims
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***57 | Module Group-Message Center; -Vids-Vids, Vims | 1 |
133-1840 Module Gp-Message Center -Vims
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***40 | Module Group-Message Center; -Vims | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
6v-6643 Module Gp-Message Center -Vims
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
| 6V***43 | Module Group-Message Center; -Vims | 1 |
8x-2824 Motor Gp-Window Wiper -Air
| 2L***67 | Locknut; (3/8-24-Thd) | 1 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 1 |
| 8X***52 | Kit-Wiper Repair; (Window) | 1 |
2a-6682 Mounting Gp-Cab
| 1D***49 | Bolt (1.25 X 7 X 10in) | 6 |
| 1F***64 | Bolt; (1-14x4-In) | 25 |
| 1K***18 | Bolt | 6 |
143-2252 Odometer Gp -Mph
| 12***31 | Plate As | 1 |
| 14***52 | Odometer Group; -Mph | 1 |
| 5B***39 | Spacer; (0.562x1x0.75-In Thk) | 2 |
143-2255 Odometer Gp -Km
| 12***31 | Plate As | 1 |
| 14***14 | Odometer As; (Tire Size: 44-80r57/36r51) | 1 |
| 14***55 | Odometer Group; -Km | 1 |
292-9240 Pan Gp-Backrest -Cloth
| 16***83 | Knob-Lumbar | 1 |
| 25***28 | Plug | 3 |
| 29***00 | Cushion As | 1 |
292-6402 Pan Gp-Backrest -Lumbar
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***07 | Holder | 1 |
178-0605 Pan Gp-Backrest -Lumbar
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***05 | Pan Group-Backrest; -Lumbar | 1 |
218-0864 Pan Gp-Backrest -Cloth
| 13***43 | Plate As-Lumbar | 1 |
| 16***83 | Knob-Lumbar | 1 |
| 17***52 | Retainer | 1 |
8y-5909 Pan Gp-Backrest -Back
| 2F***06 | Screw-Machine (6-32x. 25in); (6-32x0.25-In) | 1 |
| 3E***35 | Clip | 1 |
| 3E***36 | Stud-Ball | 1 |
108-8421 Pan Gp-Backrest -Lumbar
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
| 10***23 | Shaft As-Lumbar | 1 |
| 10***24 | Pan-Lumbar | 1 |
251-7684 Pan Gp-Backrest -Cloth
| 16***83 | Knob-Lumbar | 1 |
| 17***05 | Pan Group-Backrest; -Lumbar | 1 |
| 21***48 | Cushion As | 1 |
226-7674 Pan Gp-Backrest
| 13***43 | Plate As-Lumbar | 1 |
| 16***83 | Knob-Lumbar | 1 |
| 17***52 | Retainer | 1 |
186-3059 Pan Gp-Backrest -Cloth
| 11***04 | Cushion As-Back | 1 |
| 13***43 | Plate As-Lumbar | 1 |
| 16***83 | Knob-Lumbar | 1 |
8y-5992 Pan Gp-Seat
| 3K***97 | Pin 3.18 mm(.125 In.) Diameter | 4 |
| 6V***56 | Ring-Retaining | 2 |
| 8Y***92 | Pan As-Seat; (Bottom) | 1 |
114-9464 Panel Gp-Instrument
| 10***77 | Film-Instruction; (Arc) | 1 |
| 11***62 | Panel Group-Instrument; -Keypad | 1 |
| 11***63 | Panel Group-Instrument; -Speed/Tachometer | 1 |
114-9463 Panel Gp-Instrument -Speed/Tachometer
| 10***67 | Bezel | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***76 | Film-Dash; (Instrument Panel) | 1 |
114-9462 Panel Gp-Instrument -Keypad
| 10***66 | Bezel | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
2a-6463 Panel Gp-Instrument
| 09***37 | Spacer; (12-mm Thk) | 2 |
| 1P***10 | Tape (Order By The Meter) (Use As | 0 |
| 2A***17 | Plate As | 1 |
110-2238 Panel Gp-Instrument
| 09***37 | Spacer; (12-mm Thk) | 2 |
| 11***38 | Panel Group-Instrument; -Speedometer, Tach | 1 |
| 11***08 | Film-Dash; (Instrument Panel) | 1 |
2a-6503 Panel Gp-Instrument
| 11***38 | Panel Group-Instrument; -Speedometer, Tach | 1 |
| 2A***03 | Panel Group-Instrument; -Speedometer, Tach | 1 |
| 2G***51 | Socket As (Each Includes:) | 9 |
8x-7946 Pedal Gp-Governor
| 1M***37 | Spring | 1 |
| 2K***67 | Pin-Spring | 1 |
| 2N***56 | Screw-Machine; (10-24x1.5-In) | 2 |
257-6993 Pedal Gp-Governor
| 13***50 | Plate As | 1 |
| 1M***37 | Spring | 1 |
| 21***84 | Sensor Group-Position; (Rotary)(Engine Speed) | 1 |
4p-5080 Platform Gp -Engine Step
| 4P***80 | Platform Group; -Engine Step | 1 |
| 7X***50 | Washer-Hard; (13.5x32x5-mm Thk) | 4 |
| 8C***36 | Bolt (1/2-13x1.375in); (1/2-13x1.375-In) | 4 |
5t-4464 Platform Gp
| 0T***83 | Washer--Junction Box To Rear Support | 1 |
| 1A***63 | Bolt, Hex, Hd., 3/4"-10 N.C. X 2 1/2" | 8 |
| 29***64 | Handrail As | 1 |
210-2270 Recliner Gp-Seat
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
186-3058 Recliner Gp-Seat
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 16***46 | Spring | 1 |
215-3880 Recliner Gp-Seat
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
156-1149 Seat Belt Gp -Operator
| 15***49 | Seat Belt Group; -Retractable | 1 |
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 1 |
| 7X***10 | Washer-Hard; (15.5x29x3-mm Thk) | 1 |
8y-3792 Seat Belt Gp -Retractable-Operator
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 1 |
| 8Y***92 | Seat Belt Group; -Retractable-Operator | 1 |
8y-6857 Seat Belt Gp -Operator
| 0T***44 | Bolt (1.25" Long) | 1 |
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 2 |
| 7X***10 | Washer-Hard; (15.5x29x3-mm Thk) | 2 |
220-0131 Seat Belt Gp -Retractable
| 17***37 | Spacer; (11.7x19.8x20.3-mm Thk)(Lh Seat Side) | 1 |
| 18***59 | Screw-Pan Head; (7/16-20x1.75-In)(Lh Seat Side) | 1 |
| 18***60 | Screw-Pan Head; (7/16-20x1.25-In)(Rh Seat Side) | 1 |
122-4617 Seat Belt Gp -Retractable-Operator
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 4D***32 | Locknut (7/16-20 Thd) | 1 |
156-1148 Seat Belt Gp -Retractable-Operator
| 15***48 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 1L***80 | Bolt; (7/16-20x1.5-In) | 1 |
186-3056 Seat Gp -Cloth
| 09***93 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
186-3057 Seat Gp
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
125-2231 Seat Gp -Contour Mechanical
| 03***41 | Block-Adjustment | 2 |
| 12***31 | Seat Group; -Contour Mechanical | 1 |
| 13***42 | Support As | 1 |
8y-6907 Seat Gp
| 11***54 | Kit-Cover | 1 |
| 11***55 | Kit-Lumbar Valve; (Seat Frame As) | 1 |
| 11***56 | Kit-Spring Handle | 1 |
138-8344 Seat Gp
| 06***03 | Shim (.060mm Thk); (1.52-mm Thk) | 4 |
| 09***78 | Pin-Spring | 1 |
| 09***14 | Pin, Clevis | 1 |
8w-7235 Seat Gp -Contour Mechanical
| 03***41 | Block-Adjustment | 2 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 10 |
| 5S***79 | Hex Head Capscrew, 3/8 Nc X 7/8 In. (22 mm) | 10 |
252-9714 Seat Gp
| 16***23 | Armrest Group; -Rh | 1 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 3 |
| 22***31 | Seat Belt Group; -Retractable-Operator | 1 |
226-7677 Seat Gp -Cloth
| 09***43 | Pin-Cotter | 2 |
| 14***25 | Spring | 1 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
186-3053 Seat Gp
| 0T***44 | Bolt (1.25" Long) | 1 |
| 11***89 | Extension Group-Backrest | 1 |
| 16***23 | Armrest Group; -Rh | 1 |
186-3055 Seat Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 11***91 | Rod | 1 |
| 17***37 | Spacer; (11.7x19.8x20.3-mm Thk)(Lh Seat Side) | 1 |
156-4388 Seat Gp
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 13***44 | Seat Group | 1 |
| 15***02 | Armrest Group; -Rh | 1 |
252-9713 Seat Gp
| 16***89 | Block-Slider | 4 |
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
8y-5986 Seat Gp -Cloth, Lumbar
| 06***03 | Shim (.060mm Thk); (1.52-mm Thk) | 4 |
| 09***78 | Pin-Spring | 1 |
| 1C***69 | Bolt (1/2 In. Long 5/16 In. Dia.); Support Assembly To Heater Group | 2 |
138-4021 Seat Gp
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 13***21 | Seat Group | 1 |
| 13***44 | Seat Group | 1 |
137-0078 Seat Gp-Adjustable -Operator-Comfort Air
| 03***41 | Block-Adjustment | 2 |
| 13***42 | Support As | 1 |
| 13***78 | Seat Group-Adjustable; -Operator-Comfort Air | 1 |
257-5596 Seat Gp-Adjustable
| 14***85 | Support As | 1 |
| 25***13 | Seat Group | 1 |
| 25***96 | Seat Group-Adjustable | 1 |
253-5207 Seat Gp-Adjustable
| 14***85 | Support As | 1 |
| 1F***50 | Nut Rops Support | 4 |
| 25***13 | Seat Group | 1 |
125-2230 Seat Gp-Adjustable -Operator-Air
| 12***09 | Support As | 1 |
| 12***30 | Seat Group-Adjustable; -Operator-Air | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
2a-6380 Seat Gp-Adjustable -Air-Operator
| 2A***80 | Seat Group-Adjustable; -Air-Operator | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 6 |
8w-2967 Seat Gp-Companion
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 1B***04 | Nut-Full | 1 |
| 1H***57 | Screw-Machine; (5/16-18x0.8-In) | 8 |
5t-6543 Seat Gp-Companion
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 4 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 2 |
255-8772 Seat Gp-Companion
| 14***25 | Support As | 1 |
| 22***77 | Seat Group-Suspension; -Cloth, Lumbar | 1 |
| 25***72 | Seat Group-Companion | 1 |
8y-6137 Seat Gp-Suspension
| 10***87 | Suspension Group-Seat; -Adjustable | 1 |
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 14***45 | Kit-Slider Block; (Suspension Seat) | 1 |
151-2703 Seat Gp-Suspension
| 10***87 | Suspension Group-Seat; -Adjustable | 1 |
| 14***45 | Kit-Slider Block; (Suspension Seat) | 1 |
| 15***03 | Seat Group-Suspension | 1 |
180-7310 Seat Gp-Suspension
| 16***15 | Suspension Group-Seat; -Variable | 1 |
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
224-2677 Seat Gp-Suspension -Cloth, Lumbar
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 18***55 | Seat Group | 1 |
8x-2822 Shaft Gp-Wiper -Window
| 06***37 | Bushing-Linkage | 1 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 1 |
| 2G***22 | Bearing | 1 |
155-6004 Speedometer Gp
| 15***04 | Speedometer Group | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 4 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 4 |
3t-3408 Speedometer Gp
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 3T***08 | Speedometer Group; -Standard | 1 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
5t-6537 Control Gp-Steering
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 06***45 | Bearing-Tube | 1 |
| 18***29 | Shaft As | 1 |
221-1206 Support Gp-Seat Belt
| 22***06 | Support Group-Seat Belt; -Cloth | 1 |
| 22***37 | Support As | 1 |
| 22***38 | Support As | 1 |
108-4587 Suspension Gp-Seat
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
150-7719 Suspension Gp-Seat
| 10***17 | Bumper | 2 |
| 12***57 | Shaft | 2 |
| 12***28 | Kit-Roller; (Incls Parts Marked S) | 1 |
8y-5982 Suspension Gp-Seat -Variable
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
| 10***96 | Kit-Suspension Shaft; ((Includes Bearings) | 1 |
169-8715 Suspension Gp-Seat -Variable
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
199-5727 Suspension Gp-Seat -Air
| 10***03 | Fastener | 26 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
| 14***26 | Film-Instruction; (Seat Adjustment) | 1 |
119-7028 Suspension Gp-Seat -Air
| 10***17 | Bumper | 2 |
| 11***28 | Suspension Group-Seat; -Air | 1 |
| 12***57 | Shaft | 2 |
2a-6772 Tachograph Ar
| 2A***72 | Tachograph Ar | 1 |
| 2A***74 | Drive Group-Tachograph; -Chassis | 1 |
| 2A***76 | Tachograph Group; -Cab | 1 |
5t-9075 Tachograph Gp
| 1L***12 | Adapter-Tachometer | 1 |
| 1S***36 | Flexible Shaft 66 Inches | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
2a-6776 Tachograph Gp -Cab
| 2A***76 | Tachograph Group; -Cab | 1 |
| 5T***75 | Tachograph Group | 1 |
| 7N***29 | Connector To Cab Wall | 1 |
155-6005 Tachometer Gp
| 15***05 | Tachometer Group | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 4 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 4 |
8c-5471 Tachometer Gp
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
| 6V***68 | Nut (6-32)Thd; (No. 6-32) | 3 |
3d-9943 Valve As-Horn -Cab
| 3B***09 | Pin Governor And Decelerator Control | 1 |
| 3D***43 | Valve As-Horn | 1 |
| 4D***33 | Spring | 1 |
143-2404 Valve Gp-Air Control -Secondary Brake
| 14***04 | Valve Group-Air Control; -Secondary Brake | 1 |
| 14***26 | Adapter | 1 |
| 2G***95 | Piston | 1 |
121-5709 Valve Gp-Air Control -Exhaust Bypass
| 00***33 | Tee-Pipe | 1 |
| 12***09 | Valve Group-Air Control; -Exhaust Bypass | 1 |
| 18***80 | Valve Group-Solenoid | 1 |
246-2901 Valve Gp-Air Control
| 14***26 | Adapter | 1 |
| 1S***99 | Graduating Spring | 1 |
| 24***01 | Valve Group-Air Control; -Service Brake-Cab | 1 |
9d-3886 Valve Gp-Air Control -Retarder
| 1S***99 | Graduating Spring | 1 |
| 2G***81 | Adapter | 1 |
| 3B***04 | Lockwasher--Sheet Assembly To Angle Assembly | 2 |
5t-8174 Valve Gp-Air Control -Window Wiper
| 5T***23 | Knob; (Window Wiper) | 1 |
| 5T***74 | Valve Group-Air Control; -Window Wiper | 1 |
9d-8098 Valve Gp-Air Control -Secondary Brake
| 2G***95 | Piston | 1 |
| 2G***59 | Cam & Follower As | 1 |
| 2G***81 | Adapter | 1 |
143-2405 Valve Gp-Air Control -Retarder
| 14***05 | Valve Group-Air Control; -Manual Retarder | 1 |
| 14***26 | Adapter | 1 |
| 1S***99 | Graduating Spring | 1 |
115-6479 Vims Ar
| 11***53 | Wiring Group-Engine; -Vims | 1 |
| 11***60 | Cab Ar; -Vims | 1 |
| 11***77 | Battery & Wiring Group; -Chassis/Vims | 1 |
224-9912 Visor Gp-Cab
| 22***12 | Visor Group-Cab | 1 |
| 22***13 | Visor As | 1 |
| 9X***42 | Screw-Truss Head (M6x1.0x12mm); (M6x1.00x12mm) | 4 |
5t-6548 Visor Gp-Cab
| 1D***76 | Bolt-Carriage; (3/8-16x0.875-In)(Rh & Lh Plates) | 2 |
| 3K***60 | Nut, Hex (3/8 - 16 Nc, Plastic Insert) | 1 |
| 5T***48 | Visor Group-Cab | 1 |
2a-6685 Washer Gp-Window
| 1P***78 | Clamp; (Hose) | 4 |
| 2A***85 | Washer Group-Window | 1 |
| 4D***94 | Clip-- Compressor Clutch Wire To Compressor Body | 3 |
5t-1342 Washer Gp-Window
| 2D***35 | Grommet 20.64 mm(.813 In.)O.D. | 2 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 4 |
| 5P***74 | Tuber (R.H. Front 1.75 M(68.88 In.) | 0 |
2g-0263 Window Gp -Door, Lh
| 2G***63 | Window Group; -Door, Lh | 1 |
| 2G***12 | Window As; (Lh) | 1 |
| 6G***75 | Kit-Handle; (Lh)(Vent Window) | 1 |
8w-6212 Window Gp -Door, Rh
| 2G***18 | Nut | 2 |
| 5K***05 | Nut-Barrel; (6-32-Thd) | 2 |
| 5P***25 | Seal (Use As Required) 5.4m | 0 |
8w-6211 Window Gp-Cab -Door, Rh
| 2V***31 | Catch | 1 |
| 3V***96 | Lock As-Window | 1 |
| 4V***43 | Stop | 1 |
5t-6550 Wiper Gp-Window
| 2A***26 | Screw-Machine | 1 |
| 3K***89 | Nut-Self Locking; (5-40-Thd) | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
Power Train
9w-4119 Actuator Gp-Rotary -Transmission
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 2 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
| 3E***54 | Ball | 1 |
115-7912 Bearing Gp-Power Train
| 10***12 | Pin-Retaining | 2 |
| 10***67 | Cone-Special Roller Bearing | 1 |
| 10***68 | Cone-Special Roller Bearing | 1 |
6y-5644 Case Gp-Transmission
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 18 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 21 |
| 1D***17 | Nut-Plate And Angle Assembly To Hydraulic And Fuel Tanks; Nut Plate And Angle Assembly To Hydraulic And Fuel Tanks | 10 |
5t-4493 Control Gp-Traction
| 3B***18 | Spacer; (1.375-In Thk) | 2 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 3 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
3t-0288 Control Gp-Transmission Hyd
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
129-1807 Cooler Gp-Rear Axle Oil
| 12***23 | Mount; (Motor) | 1 |
| 12***26 | Guard; (Finger) | 1 |
| 12***07 | Cooler Group-Rear Axle Oil | 1 |
129-1811 Cooler Gp-Rear Axle Oil
| 12***05 | Hose As | 1 |
| 12***06 | Hose As | 1 |
| 12***07 | Cooler Group-Rear Axle Oil | 1 |
7t-4997 Cover Gp-Shipping -Transmission-Transmission Control
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 8 |
| 0S***83 | Bolt 31.75 mm(1.25 In.) Long | 2 |
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 4 |
8x-7240 Differential & Bevel Gear Gp
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 16 |
| 2H***32 | Seal--To Bottom Cover On Selector Valve | 1 |
104-3931 Differential & Bevel Gear Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 7 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 16 |
125-6046 Differential & Bevel Gear Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 6 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 3 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 8 |
8w-9543 Differential Gp
| 10***58 | Nut; (2-1/8-Thd) | 4 |
| 13***45 | Housing As-Differential | 1 |
| 2H***90 | Dowel .687 In. (17.46 mm) Long | 2 |
107-8488 Drive Gp-Final
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 6 |
| 10***31 | Hub | 2 |
| 10***88 | Drive Group-Final | 1 |
113-2553 Drive Gp-Final
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 6 |
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 16 |
| 10***31 | Hub | 2 |
5t-1027 Filter & Lines Gp-Torque Conv
| 03***45 | Connector | 1 |
| 03***01 | . Tube; Cyl., Elbow; (To Adapter) | 1 |
| 06***93 | Bushing-Reducer; (1/2-14 Nptf) | 1 |
6p-4603 Filter Gp-Oil -Xmsn Charging, Lubrication-Secondary, Park Brake
| 13***75 | Filter Element As-Oil; (Ultra High Efficiency)(Cleanout/High Efficiency) | 1 |
| 1R***19 | Filter Element As-Oil; (Standard Efficiency)(Power Train) | 1 |
| 2J***56 | Ring-Retaining | 1 |
132-2820 Filter Gp-Oil -Rear Axle Lubrication
| 12***95 | Spool | 1 |
| 13***20 | Filter Group-Oil; -Rear Axle Lubrication | 1 |
| 13***21 | Base-Final Drive Oil Filter | 1 |
126-7840 Filter Gp-Oil -Rear Axle
| 12***95 | Spool | 1 |
| 12***40 | Filter Group-Oil; -Rear Axle | 1 |
| 12***44 | Base-Oil Filter | 1 |
129-5760 Filter Gp-Oil -Rear Axle
| 12***60 | Filter Group-Oil; -Differential | 1 |
| 12***61 | Base | 1 |
| 13***75 | Filter Element As-Oil; (Ultra High Efficiency)(Cleanout/High Efficiency) | 1 |
4t-4760 Filter Gp-Oil -Torque Converter Charging
| 13***76 | Filter Element As-Oil; (Ultra High Efficiency)(Ultra High Efficiency) | 2 |
| 1H***00 | Pin--To Compression Release Shaft | 2 |
| 1R***41 | Filter Element As-Oil; (Standard Efficiency) | 2 |
5t-4473 Drive Gp-Final
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 6 |
| 1F***58 | Nut-Full; (1/2-13-Thd)(Air Lines) | 24 |
| 1V***59 | Ring-Retaining | 2 |
6y-5643 Gear Gp-Transfer
| 0S***02 | Bolt; (5/8-18x3.5-In) | 1 |
| 12***36 | Race-Bearing; Bearing-Race | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 16 |
5t-4474 Housing Gp-Rear Axle
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 10***44 | Plate | 1 |
129-0481 Housing Gp-Rear Axle
| 03***67 | Block | 2 |
| 03***28 | Clip; (31.8mm Id) | 2 |
| 12***81 | Housing Group-Rear Axle | 1 |
198-5953 Housing Gp-Rear Axle
| 12***81 | Housing Group-Rear Axle | 1 |
| 16***22 | Plug-Magnetic; (Rear Axle Housing) | 1 |
| 19***53 | Housing Group-Rear Axle | 1 |
128-4002 Lines Gp-Power Train Filter
| 12***02 | Lines Group-Power Train Filter | 1 |
| 12***03 | Hose As | 1 |
| 13***50 | Valve Group-Flow Control & Relief; -Rear Axle Oil Filter | 1 |
5t-4487 Lines Gp-Transmission Oil
| 03***38 | Bolt 69.85 mm(2.75 In.) Long | 1 |
| 10***25 | Clip; (Slot) | 1 |
| 10***26 | Clip; (Tab) | 1 |
5t-6639 Neutralizer Gp-Transmission
| 01***08 | Screw-Machine | 2 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
| 1B***06 | Key-Woodruff | 1 |
257-6988 Neutralizer Gp-Transmission
| 01***08 | Screw-Machine | 2 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
| 1B***06 | Key-Woodruff | 1 |
3t-0036 Planetary Gp-Transmission
| 03***37 | Bolt-Self Locking; 3.81cm(1.5 In.)Long | 12 |
| 06***16 | Ring-Retaining | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 24 |
129-8121 Pump & Lines Gp-Rear Axle Lube
| 08***08 | Washer; (16.6x32x5-mm Thk) | 1 |
| 11***35 | Gear; (46-Teeth) | 1 |
| 12***55 | Tube As | 1 |
3t-0259 Pump Gp-Gear -Xmsn Charging, Scavenge, Lube
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 1S***74 | Seal-O-Ring | 1 |
| 3T***59 | Pump Group-Gear; -Transmission Charging-Scavenge, Lube | 1 |
125-8648 Pump Gp-Gear -Axle Oil
| 00***00 | Ring-Snap | 1 |
| 07***23 | Seal, Ring | 2 |
| 07***63 | Plate | 2 |
6t-6147 Pump Gp-Gear
| 1M***09 | Bearing-Sleeve | 2 |
| 2B***73 | Key-Woodruff | 2 |
| 2D***09 | Seal--To Cover & Plate Bearing Retainers | 4 |
6t-6146 Pump Gp-Gear -Front Brake Cooling
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1M***36 | Dowel | 2 |
| 3T***06 | Cover As-Oil Pump | 1 |
3t-0260 Pump Gp-Gear -Xmsn Charging, Scavenge, Lube
| 13***73 | Seal-Lip Type | 1 |
| 16***68 | Seal-O-Ring | 4 |
| 1B***36 | Key-Woodruff | 2 |
6t-6149 Pump Gp-Gear -Tc Scav & Chrg, Park Bk Rel, Front Bk Clg
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 9 |
| 1B***14 | Key-Woodruff | 1 |
8x-2770 Rim Gp-Demountable
| 03***37 | Bolt-Self Locking; 3.81cm(1.5 In.)Long | 20 |
| 10***02 | Band-Bead Seat | 6 |
| 10***04 | Rim As | 6 |
143-2174 Rim Gp-Demountable
| 10***83 | Clamp As | 2 |
| 13***82 | Rim Group-Demountable | 6 |
| 14***74 | Rim Group-Demountable | 1 |
138-7581 Rim Gp-Demountable
| 10***17 | Band-Bead Seat | 1 |
| 13***59 | Rim As | 1 |
| 13***81 | Rim Group-Demountable | 1 |
104-7210 Rim Gp-Demountable
| 03***57 | Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer | 20 |
| 10***08 | Rim As | 6 |
| 10***10 | Rim Group-Demountable | 1 |
173-5383 Rim Gp-Demountable
| 10***02 | Band-Bead Seat | 1 |
| 17***72 | Flange | 2 |
| 17***83 | Rim Group-Demountable; -80 Series | 1 |
138-7582 Rim Gp-Demountable
| 13***62 | Rim As | 1 |
| 13***82 | Rim Group-Demountable | 1 |
| 32***28 | Band | 1 |
5t-4491 Rim Gp-Demountable
| 03***57 | Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer | 20 |
| 1D***66 | Bolt Bracket Assembly To Yoke | 8 |
| 2D***08 | Grommmet | 1 |
7i-4812 Rim Gp-Single
| 10***17 | Band-Bead Seat | 1 |
| 2D***08 | Grommmet | 1 |
| 5T***37 | Rim As. | 1 |
111-8865 Rim Gp-Single
| 11***65 | Rim Group-Single | 1 |
| 13***82 | Rim Group-Demountable | 1 |
| 2D***08 | Grommmet | 1 |
104-7188 Rim Gp-Single
| 10***88 | Rim Group-Single | 1 |
| 13***81 | Rim Group-Demountable | 1 |
| 2D***08 | Grommmet | 1 |
8x-1928 Rim Gp-Single
| 10***02 | Band-Bead Seat | 1 |
| 13***62 | Rim As | 1 |
| 2D***08 | Grommmet | 1 |
7t-4554 Screen Gp-Magnetic -Transmission
| 1A***69 | Bolt (R.H. Side Flywheel Housing) | 2 |
| 3D***71 | Stud-Taperlock; (3/8-16x1.5-In)(3/8 In.Nc X 1 1/2) | 8 |
| 3S***39 | Cover-Top | 2 |
5t-8543 Shaft Gp-Drive
| 2N***86 | Bolt-12 Point Head | 8 |
| 5T***43 | Shaft Group-Main Drive; -Main | 1 |
| 8X***65 | Slip Joint Group | 1 |
8x-0465 Slip Joint Gp
| 2N***86 | Bolt-12 Point Head | 8 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
| 5T***82 | Kit-Seal | 1 |
8e-8998 Torque Converter Gp
| 03***80 | Bolt 4.128 cm(1.625 In.) Long | 16 |
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 17 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
116-5810 Torque Converter Gp
| 06***58 | Ball Bearing | 1 |
| 0L***28 | Bolt 10.16 mm(4 In.) Long | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 12 |
8e-8997 Torque Converter Gp
| 06***58 | Ball Bearing | 1 |
| 0L***28 | Bolt 10.16 mm(4 In.) Long | 1 |
| 0S***02 | Bolt; (5/8-18x3.5-In) | 3 |
116-5811 Torque Converter Gp
| 03***80 | Bolt 4.128 cm(1.625 In.) Long | 14 |
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 17 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
3t-0034 Transmission Ar
| 3T***29 | Sensor Group-Speed; -Transmission Output | 1 |
| 3T***34 | Transmission Ar | 1 |
| 3T***36 | Planetary Group | 1 |
230-4112 Universal Joint Gp
| 23***12 | Universal Joint Group | 1 |
| 23***13 | Universal Joint Group | 1 |
| 8X***14 | Universal Joint Group-Pump Drive | 1 |
5t-6567 Universal Joint Gp
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 8 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 8 |
| 5T***66 | Tube | 1 |
230-4113 Universal Joint Gp
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 8 |
| 10***87 | Spider And Bearing | 2 |
| 23***13 | Universal Joint Group | 1 |
3t-0289 Valve Gp-Transmission Control
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 1 |
| 1D***41 | Bolt 3.00 In.(7.62 cm) Long | 12 |
| 1F***11 | Bolt 3.50 In. (8.89 cm) Long | 1 |
2p-2859 Valve Gp-Relief -Xmsn Cooler Inlet
| 1P***20 | Spring (Outer) | 1 |
| 1S***43 | Spring (Inner) | 1 |
| 2K***94 | Pin-Spring; (7.94x76.2-mm) | 1 |
130-4751 Valve Gp-Flow Control & Relief -Rear Axle Oil Cooler
| 0T***68 | Bolt,Machine; Tube Mounting And Tube To Junction Block Uoc:Bsv,Bsx | 4 |
| 12***37 | Valve Group-Flow Control & Relief; -Final Drive | 1 |
| 12***88 | Adapter | 1 |
126-7837 Valve Gp-Flow Control & Relief -Axle Oil
| 12***37 | Valve Group-Flow Control & Relief; -Final Drive | 1 |
| 12***39 | Piston | 1 |
| 1B***04 | Spring (Inner) | 1 |
130-4750 Valve Gp-Flow Control & Relief -Rear Axle Oil Filter
| 12***37 | Valve Group-Flow Control & Relief; -Final Drive | 1 |
| 13***50 | Valve Group-Flow Control & Relief; -Rear Axle Oil Filter | 1 |
| 1N***98 | Plug; (Clutch/Brake Models Only) | 1 |
8e-6146 Valve Gp-Lockup Clutch & Sync -Torque Converter
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
| 1D***40 | Bolt,Machine Fuel Filter Mounting | 4 |
| 1U***76 | Connector | 1 |
6t-3340 Valve Gp-Lube Relief -Transmission, Transfer Gear
| 3J***93 | Spring | 1 |
| 6T***40 | Valve Group-Lube Relief; -Transmission Hydraulic Control | 1 |
| 7M***85 | Seal,Adapter,Motor Part Of Kit P/N 5r***29 | 1 |
6y-4257 Valve Gp-Pressure Control -Transmission
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 1 |
| 16***78 | Body-Load Piston | 7 |
| 20***18 | Plug As-Orifice | 2 |
9u-9716 Valve Gp-Relay -Lockup Clutch
| 2P***00 | Spring (Outer) | 1 |
| 2R***06 | Connector Valve Assembly To; Connector- Tube Assembly To Logic Valve | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
6i-9533 Valve Gp-Relay -Lockup Clutch
| 6I***33 | Valve Group-Relay; -Lockup Clutch | 1 |
| 7X***20 | Valve Group-Solenoid; (Synchronization) | 1 |
| 9U***16 | Valve Group-Relay; -Lockup Clutch | 1 |
9w-7403 Valve Gp-Relief
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1L***62 | Ring-Retaining | 1 |
| 2P***38 | Spool Assembly, Including:- | 1 |
3p-0348 Valve Gp-Relief
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1L***62 | Ring-Retaining | 1 |
| 2P***38 | Spool Assembly, Including:- | 1 |
3t-0290 Valve Gp-Selector & Press Cont -Transmission
| 03***30 | Bolt-Self Locking; (5/16unc X 3/4) | 1 |
| 12***33 | Spring As | 2 |
| 13***45 | Pin-Spring | 1 |
3t-0062 Valve Gp-Solenoid
| 11***03 | Seal-O-Ring | 1 |
| 13***34 | Screen As; (Traction Control Valve) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
9g-9988 Valve Gp-Solenoid
| 12***48 | Kit-Seal; (Solenoid Valve) | 0 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
| 16***43 | Washer-Identification; (16.8x38.1x.5mm Thk) | 1 |
193-8559 Valve Gp-Solenoid
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Cartridge As | 1 |
107-8238 Valve Gp-Solenoid
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 10***38 | Valve Group-Solenoid | 1 |
| 10***11 | Cartridge As | 1 |
7x-1120 Valve Gp-Solenoid
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 10***70 | Locknut; (1/4-20-Thd) | 1 |
| 4B***76 | Washer Generator Line Leads (Use As Required) | 1 |
144-6292 Valve Gp-Solenoid
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 10***11 | Cartridge As | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
9g-9208 Valve Gp-Traction Control
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 10 |
115-1778 Wheel Ar-Final Drive & Brake
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 3 |
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 8 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 12 |
119-2295 Wheel Gp
| 11***95 | Wheel Group | 1 |
| 11***96 | Spacer | 1 |
| 9X***55 | Bolt-Socket Head; (M6x1x16.7-mm) | 2 |
143-2173 Wheel Gp-Rear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
| 10***41 | Retainer | 2 |
| 10***12 | Pin-Retaining | 4 |
5t-4476 Wheel Gp-Rear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
| 10***41 | Retainer | 2 |
| 10***12 | Pin-Retaining | 4 |
Service Equipment And Supplies
9g-9288 Cap Gp-Protection -Transmission Tank Fill Cap
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 2J***61 | Ring-Retaining | 1 |
5t-6942 Cap Gp-Protection
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 2J***61 | Ring-Retaining | 1 |
143-2246 Chock Gp-Wheel
| 14***46 | Chock Group-Wheel | 1 |
| 15***97 | Chock-Wheel | 2 |
| 15***01 | Bracket As | 1 |
6g-8390 Protection Gp-Vandalism -Tc, Hoist, Brake
| 11***81 | Cover-Hydraulic Cap | 1 |
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 1M***49 | Ring (5.313" Dia.) | 1 |
100-9990 Film Gp
| 10***25 | Film-Stripe; (Caterpillar) | 1 |
| 10***84 | Film-Stripe; (Caterpillar) | 1 |
| 10***85 | Film-Stripe; (Rh)(Cat) | 1 |
111-3324 Plate & Film Gp -Cab
| 10***38 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***31 | Film-Instruction; (Retarding Guidelines) | 1 |
| 10***16 | Film-Instruction; (Automatic Retarder Control) | 1 |
111-3317 Plate & Film Gp -Cab
| 10***33 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***26 | Film-Instruction; (Retarding Guidelines) | 1 |
| 10***11 | Film-Instruction; (Automatic Retarder Control)(Arc) | 1 |
3e-9642 Plate & Film Gp
| 10***39 | Film-Warning; (Cable Connection) | 1 |
| 10***40 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
| 11***20 | Plate & Film Group; -Cab | 1 |
111-3328 Plate & Film Gp -Cab
| 10***68 | Plate-Warning; (Machine Operation) | 1 |
| 10***31 | Film-Instruction; (Automatic Retarder Control)(Arc) | 1 |
| 10***33 | Film-Information; (Payload Measurement) | 1 |
3e-9638 Plate & Film Gp
| 10***35 | Film-Warning; (Cable Connection) | 1 |
| 10***08 | Film-Information; (Engine Oil)(Install On Oil Filter Cap) | 1 |
| 11***16 | Plate & Film Group; -Cab | 1 |
3e-9640 Plate & Film Gp
| 10***37 | Film-Warning; (Jumper Cable Use) | 1 |
| 10***38 | Film-Warning; (Unit Injector) | 5 |
| 11***18 | Plate & Film Group; -Cab | 1 |
102-8527 Plate & Film Gp
| 10***27 | Plate & Film Group | 1 |
| 10***42 | Film-Warning; (Cable Connection) | 1 |
| 10***43 | Film-Warning; (Unit Injector) | 5 |
111-3321 Plate & Film Gp -Cab
| 10***37 | Film-Information; (Transmission Control)(Display Modes) | 1 |
| 10***30 | Film-Instruction; (Retarding Guidelines) | 1 |
| 10***15 | Film-Instruction; (Automatic Retarder Control) | 1 |
3e-9641 Plate & Film Gp
| 10***38 | Film-Warning; (Cable Connection) | 1 |
| 10***39 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
| 11***19 | Plate & Film Group; -Cab | 1 |
111-3327 Plate & Film Gp -Cab
| 10***43 | Film-Information; (Payload Measurement) | 1 |
| 10***42 | Film-Information; (Transmission Control) | 1 |
| 10***36 | Film-Instruction; (Retarding Guidelines) | 1 |
3e-9643 Plate & Film Gp
| 10***40 | Film-Warning; (Cable Connection) | 1 |
| 10***41 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
| 11***21 | Plate & Film Group; -Cab | 1 |
102-8526 Plate & Film Gp
| 10***26 | Plate & Film Group | 1 |
| 10***41 | Film-Warning; (Cable Connection) | 1 |
| 10***42 | Film-Warning; (Elec Shock Hazard, Danish) | 5 |
111-3318 Plate & Film Gp -Cab
| 10***34 | Film-Information; (Transmission Control)(Display Modes) | 1 |
| 10***27 | Film-Instruction; (Retarding Guidelines) | 1 |
| 10***60 | Film-Instruction; (Prelubrication Pump) | 1 |
102-8529 Plate & Film Gp
| 10***74 | Plate-Instruction; (Grease) | 2 |
| 10***23 | Film-Instruction; (Hydraulic Accumulator) | 4 |
| 10***29 | Plate & Film Group | 1 |
111-3320 Plate & Film Gp -Cab
| 10***36 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***29 | Film-Instruction; (Retarding Guidelines) | 1 |
| 10***14 | Film-Instruction; (Automatic Retarder Control) | 1 |
111-3316 Plate & Film Gp -Cab
| 11***16 | Plate & Film Group; -Cab | 1 |
| 14***78 | Film-Instruction; (Retarding Guidelines) | 1 |
| 8T***91 | Plate; (Warning) (Universal) (W/O Cab-On The Top Of Panel At Right Hand Side Of Cms) | 1 |
111-3322 Plate & Film Gp -Cab
| 10***48 | Film-Information; (Payload Measurement)(Tpms) | 1 |
| 10***41 | Film-Information; (Transmission Control)(Display Modes) | 1 |
| 10***34 | Film-Instruction; (Retarding Guidelines) | 1 |
3e-9620 Plate & Film Gp
| 10***90 | Film Group | 1 |
| 11***92 | Plate-Instruction; (Air Conditioner) | 1 |
| 11***15 | Plate & Film Group; (Cab) | 1 |
111-3323 Plate & Film Gp -Cab
| 10***40 | Film-Identification; (Truck Payload Measurement Sys)(Truck Payload Monitor System) | 1 |
| 10***35 | Film-Instruction; (Retarding Guidelines) | 1 |
| 10***66 | Film-Information; (Transmission Control)(Display Modes) | 1 |
3e-9644 Plate & Film Gp
| 10***28 | Film-Instruction; (Hydraulic Accumulator)(Japanese) | 4 |
| 10***44 | Film-Warning; (Cable Connection) | 1 |
| 10***45 | Film-Warning; (Unit Injector) | 5 |
3e-9639 Plate & Film Gp
| 10***36 | Film-Warning; (Cable Connection) | 1 |
| 10***37 | Film-Warning; (Electrical Shock Hazard) | 5 |
| 11***17 | Plate & Film Group; -Cab | 1 |
111-3325 Plate & Film Gp -Cab
| 10***39 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***32 | Film-Instruction; (Retarding Guidelines) | 1 |
| 10***17 | Film-Instruction; (Automatic Retarder Control) | 1 |
111-3319 Plate & Film Gp -Cab
| 10***35 | Film-Information; (Transmission Control)(Display Modes) | 1 |
| 10***28 | Film-Instruction; (Retarding Guidelines) | 1 |
| 10***13 | Film-Instruction; (Automatic Retarder Control) | 1 |
102-8528 Plate & Film Gp
| 10***28 | Plate & Film Group | 1 |
| 10***43 | Film-Warning; (Cable Connection) | 1 |
| 10***44 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
104-5272 Plate & Film Gp
| 10***65 | Film-Warning; (Crankcase)(Crankcase Cover Removal) | 2 |
| 10***66 | Film-Warning; (Unit Injector) | 5 |
| 10***69 | Plate-Instruction; (Grease)(Grease) | 2 |
3e-9645 Plate & Film Gp
| 10***45 | Film-Warning; (Cable Connection) | 1 |
| 10***46 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
| 11***23 | Plate & Film Group; -Cab | 1 |
111-3326 Plate & Film Gp -Cab
| 10***40 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***33 | Film-Instruction | 1 |
| 10***18 | Film-Instruction; (Automatic Retarder Control) | 1 |
260-8757 Plate & Film Gp
| 10***00 | Plate-Warning-Rops/Fops | 1 |
| 14***78 | Film-Instruction; (Retarding Guidelines) | 1 |
| 26***57 | Plate & Film Group | 1 |
100-8376 Plate-Warning -Stopping
| 10***76 | Plate-Warning; -Stopping | 1 |
Steering System
7i-4907 Accumulator & Mounting Gp
| 0S***92 | Bolt--Cover To Flywheel Housing | 8 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 2 |
| 1F***58 | Nut-Full; (1/2-13-Thd)(Air Lines) | 2 |
6e-6611 Accumulator Gp-Steering
| 14***99 | Kit-Repair; (Accumulator Bladder)(Steering) | 1 |
| 16***05 | Ring | 1 |
| 16***06 | Spacer; (80x101.6x7.2-mm Thk) | 2 |
5t-4470 Cylinder & Mtg Gp-Steering
| 3J***99 | Self Locking Nut; (2 1/4-12) | 4 |
| 4T***97 | Cylinder Group | 2 |
| 5T***70 | Cylinder & Mounting Group | 1 |
4t-6797 Cylinder Gp-Steering
| 16***07 | Seal As-Buffer | 1 |
| 16***17 | Seal-U-Cup | 1 |
| 1D***27 | Bolt,Machine Head Mtg Uoc:Bsv,Bsx | 4 |
4t-4284 Filter Gp-Oil -Steering Pump Case Drain
| 4T***84 | Filter Group-Hydraulic; -Fan Pump, Motor Case Drain | 1 |
| 4T***15 | Filter-Oil; (Standard Efficiency)(Steering Pump Case Drain) | 1 |
| 5M***14 | Pipe Plug Cylinder Block Oil Pressure | 1 |
1u-8331 Fitting Gp-Quick Disconnect
| 1U***28 | Fitting; (Quick Disconnect, Male) | 1 |
| 1U***29 | Cap-Dust; (Steering Tank) | 1 |
| 1U***31 | Fitting Group-Quick Disconnect | 1 |
2a-6533 Lines Gp-Steering
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 8 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 2 |
2a-6945 Link Gp-Steering
| 2A***43 | Socket As; (Lh Threads) | 1 |
| 2A***44 | Socket As; (Rh Threads) | 1 |
| 2A***45 | Link Group | 1 |
5t-4462 Link Gp-Steering
| 0S***27 | Bolt -114.30 mm(4.50 In.) Long | 2 |
| 13***60 | Lock | 1 |
| 13***69 | Arm-Center | 1 |
2a-6532 Pump & Mtg Gp-Steering
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 2A***32 | Pump & Mtg Group-Steering | 1 |
| 5F***99 | Packing,Preformed Cover Mtg; Part Of Kit P/N 5r***25 Part Of Kit P/N 8s***57 | 1 |
9t-1318 Pump Gp-Metering -Steering
| 14***37 | Kit-Seal; (Steering Pump) | 1 |
| 6C***11 | Spacer | 1 |
| 6C***12 | Drive-Control | 1 |
6e-4221 Swashplate Gp
| 13***32 | Block-Stop | 2 |
| 6E***21 | Swashplate Group; -Implement Pump | 1 |
| 8F***19 | Seal (4.47 Degrees I.D.) | 2 |
184-1527 Swashplate Gp
| 16***01 | Swashplate Stop | 2 |
| 18***27 | Swashplate Group; -Implement Pump | 1 |
| 1H***37 | Pin (Spring) | 2 |
6e-6297 Tank & Filter Gp-Steering -Hydraulic
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 70 |
2a-7108 Tank Gp-Hydraulic
| 1U***31 | Fitting Group-Quick Disconnect | 1 |
| 2A***08 | Tank Group-Hydraulic | 1 |
| 3B***31 | Elbow, 45 Degrees 1/2 Npt Adapter - Low Power Take-Off | 1 |
148-9236 Valve Gp-Accumulator Charging
| 14***36 | Valve Group-Accumulator Charging | 1 |
| 14***37 | Valve As; (Accumulator Charging) | 1 |
| 7X***81 | Kit-Seal; (Pressure Reducing Valve) | 1 |
107-8137 Valve Gp-Accumulator Charging
| 10***96 | Valve As; (Accumulator Charging) | 1 |
| 10***37 | Valve Group-Accumulator Charging | 1 |
| 7X***81 | Kit-Seal; (Pressure Reducing Valve) | 1 |
4t-2742 Valve Gp-Relief -Steering
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***41 | Spring | 1 |
| 4T***42 | Valve Group-Relief; -Secondary Steering | 1 |
108-2184 Valve Gp-Relief -Steering
| 10***84 | Valve Group-Relief; -Steering | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***41 | Spring | 1 |
6t-8046 Valve Gp-Solenoid
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 3G***71 | Cartridge Assem. | 1 |
| 3G***75 | Seal Kit; (Includes Seals And Ring) | 1 |
149-2658 Valve Gp-Solenoid
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 14***11 | Cartridge Assem. | 1 |
| 14***58 | Valve Group-Solenoid; -Blade Lock | 1 |
149-2610 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***10 | Valve Group-Solenoid; -Axle Oil Cooler-Hydraulic Lockout | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
6e-6298 Valve Gp-Solenoid & Relief -Steering
| 10***84 | Valve Group-Relief; -Steering | 1 |
| 14***58 | Valve Group-Solenoid; -Blade Lock | 1 |
| 1P***77 | Flange-Half (For Tilt Ports On Valve) | 2 |
9t-1317 Valve Gp-Steering -Control
| 14***45 | Cover | 1 |
| 14***47 | Cover | 1 |
| 24***74 | Seal-O-Ring | 4 |
5t-1023 Wheel Gp-Front
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 24 |
| 10***88 | Wheel-Front | 2 |
| 14***37 | Retainer | 2 |
789B serial number reference
The PIN/serial data plate on a 789B is mounted on the truck frame (front frame rail area), with a duplicate plate usually also fitted inside the cab; check both, since field plates get repainted or damaged. Read the first 3 characters as the model/plant prefix and the remaining digits as the sequential unit number built under that prefix.
| Prefix | Identifies | Notes |
|---|---|---|
| 7EK | 789B mechanical-drive mining/off-highway truck | Primary and only confirmed PIN/serial prefix for the 789B off-highway truck, spanning the model's production run from its introduction around 1992 until the 789C generation replaced it. Fitted with the Cat 3516 diesel (electronic unit injection, EUI); Caterpillar groups the 789B with the 784B, 785B and 793B trucks in one 3512/3516-family engine manual set, with the 16-cylinder 3516 tied specifically to the 789B and the smaller 12-cylinder 3512 tied to the 785B. Exact end-of-production year is not firmly documented for this range; confirm with a dealer for late-build units near a generation changeover. |
Frequently asked questions
What engine does the Caterpillar 789B use?
The 789B is powered by a Cat 3516 V-16 diesel with electronic governor control, in the roughly 1,342 kW (1,800 hp) gross power class. The later 789C moved to a 3516B EUI engine with more power - don't source parts across the two without checking your truck's serial number.
What is the operating weight of the Caterpillar 789B?
Fully loaded, the 789B grosses around 317 tonnes (350 tons). Nominal payload rating is documented anywhere from about 154 to 177 tonnes (170-195 tons) depending on configuration and source, so confirm against your specific truck's data plate rather than assuming one figure.
What replaced the Caterpillar 789B?
Caterpillar replaced the 789B with the 789C in the mid-to-late 1990s, which added a higher-output EUI-injected engine and a higher payload rating. The line continued through the 789D and into today's 789 Next Generation.
What 789B owners discuss
What engine does the 789B actually run, and does that matter for service versus the 789C?
The 789B carries the Cat 3516 EUI (electronic unit injection) diesel, gross power in the roughly 1320-1342 kW (1770-1800 hp) class depending on rating plate and source. That's the earlier EUI fuel-system generation, not the 3516B EUI/HEUI fitted to the later 789C. Fuel-system architecture and injector service between the two are different families - don't cross-apply 789C injector or fuel-pressure fixes to a 789B, and don't assume 789C parts interchange without checking the engine arrangement number.
Why does the dump body come down hard and bang the frame on some 789Bs?
This shows up repeatedly on B-series trucks. The C-series added an electronic hoist-valve snub that slows the cylinders as the body nears the frame; the B-series hoist control is mechanically operated and does not have that feature, so some bang on set-down is inherent to the design. A body that lands unusually hard still points to the hoist circuit: check the diverter valve that also routes brake-cooling oil into the hoist circuit, the counterbalance-valve signal-line orifice for blockage, and the hoist-cylinder rod-end vent line before writing it off as normal. Have your dealer verify hoist circuit pressures if the bang gets worse or louder over time.
What does the frame-rail proximity switch actually control on a B-series?
The left frame-rail proximity switch that senses body-up position does not drive a hoist snub on the B-series - it feeds the transmission's electronic control instead. With the body up, the transmission control inhibits reverse and limits forward travel to first gear only, as a rollover safeguard while the body is raised. A truck that won't take reverse or won't shift past first gear with the body down more often traces back to this switch or its wiring than to the transmission itself.
How do the brakes and retarder hold up under continuous haul-road use?
These trucks use oil-cooled disc brakes at each wheel with automatic retarder control, cooled continuously through a water-to-oil heat exchanger. The recurring complaint on trucks this size is cooling flow, not the discs wearing out - a plugged oil cooler core or restricted flow shows up as the retarder overheating on grade, diagnosed by comparing oil temperature at the cooler inlet versus outlet. Because brake-cooling oil and hoist oil share a diverter valve on this model, a sticking diverter can affect both circuits together. Have your dealer verify cooling flow and brake temperatures if overheating recurs on grade.
What wears fastest on the tires and suspension - what should an owner watch?
Tire wear tracks load balance and inflation pressure closely on a truck this size; uneven wear and shortened tread life follow directly from incorrect pressure or an unevenly loaded body, more than from tread depth alone. Front and rear suspension cylinders are nitrogen-over-oil - seal wear and slow nitrogen bleed-down show up as a softer ride and inconsistent frame height side to side rather than a sudden failure. Both are treated as routine wear items on this class of truck and checked at every PM, not as one-off defects.
Are frame cracks a real concern on a truck this size?
Yes, and it's a standard inspection item rather than an occasional worry. The box-section frame carries dynamic twisting loads at speed fully loaded, and once a crack starts it can propagate quickly compared to smaller machines. Dye-penetrant checks at hoist mounts, pivot points, and major frame welds are standard practice at PM intervals, and finding a crack shortens the next inspection interval rather than being a one-time repair. Have your dealer verify any suspect weld or crack with a proper penetrant inspection before returning the truck to service.
What should I check before buying a used 789B?
Hour meter alone doesn't tell the story - pull the machine's onboard payload and event history for overload or impact counts if it's available, since that reflects how the truck was actually loaded and driven. Ask for rebuild history on the engine, torque converter/transmission, and differential/final drives - on a truck this size those are scheduled component changes on an hour interval, not just repairs done when something breaks. Inspect the frame at hoist mounts and pivots for cracking or prior weld repair, check suspension cylinder nitrogen charge and seals for leakage, cycle the hoist and watch how the body sets down (a hard bang on set-down is worth investigating, not ignoring), and check tire wear pattern for signs of chronic pressure or load imbalance. Have your dealer verify frame, hoist, and brake-cooling condition with a full inspection before you commit to the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 789B part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.