Caterpillaroff-highway trucktruck
Caterpillar 785B
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 785B is a rigid-frame off-highway mining haul truck built from 1992 to 1999 under serial prefix 6HK. It runs a Cat 3512 EUI (electronic unit injection) V12 diesel, twin-turbocharged and aftercooled, rated 1029 kW (1380 hp) gross and 962 kW (1290 hp) net. Power reaches the ground through a six-speed planetary powershift transmission and double-reduction planetary final drives, a fully mechanical driveline, for a top speed of 56 km/h (34.8 mph). Operating weight runs approximately 96,360 kg (212,440 lb) empty, with a rated payload near 136,078 kg (300,000 lb, about 150 tons). Caterpillar offered the 785B with a dual-slope steel dump body plus application-specific bodies, multiple tire and rim packages, and a bare-chassis platform for conversion into water, fuel, or service trucks. It followed the original 785 and preceded the 785C.
The B-to-C step in this line is a ratings and electronics update within the EUI engine family, not a shift from mechanical to electronic fuel control - the 785B already ran electronic unit injection on its 3512. The 785C that followed carries a further-uprated 3512B EUI near 1082 kW (1450 hp) gross and adds VIMS payload and health monitoring as standard equipment rather than an option. Later 785D and current-generation trucks moved to larger-displacement HD and ACERT-family engines, Tier II and Tier 4 Final/Stage V emissions compliance, and higher-capacity, altitude-derate-free ratings. For today's buyer the 785B is a mature, well-understood EUI-engine platform with an established parts and rebuild network, useful where a mine runs an older mixed fleet or wants a lower acquisition cost than a current-generation truck. Confirm the individual PIN and configuration before buying, since the 785 designation has covered several distinct generations across three decades.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 785B specifications
Engine
| Engine model | Cat 3512, V12 diesel. |
| Gross power | 1029 kW (1380 hp). |
| Net power | 962 kW (1290 hp). |
| Displacement | 51.8 L (3,161 cu in). |
| Cylinders | 12 (V12). |
| Emissions tier | Pre-emissions-tier. Built 1992-1999, before U.S. EPA nonroad Tier and EU Stage rules applied to this power class. |
Weights
| Operating (empty) weight | 96,355-96,372 kg (212,422-212,458 lb); figure varies slightly by source. |
| Gross weight (loaded) | approximately 232,440 kg (512,440 lb), the sum of operating weight and rated payload; a higher figure sometimes cited online does not reconcile with published operating weight and payload and is not used here. |
| Rated payload | 136,078 kg (300,000 lb), about 150 tons. |
Dimensions
| Transport length | 11.02 m (36 ft 2 in). |
| Transport width | 6.63-6.65 m (21 ft 9 in-21 ft 10 in); varies by source. |
| Transport height | 5.77-5.79 m (18 ft 11 in-19 ft); varies by source. |
| Wheelbase | 5.18 m (17 ft). |
| Dump height (body raised) | 11.2-11.22 m (36 ft 9 in-36 ft 10 in). |
| Tire size | 33.00-51, 50PR (E-4) rock-service tread. |
Performance
| Max travel speed | 56 km/h (34.8 mph), forward. |
| Heaped body capacity | 78 m³ (102 cu yd). |
| Struck body capacity | 57 m³ (74.6 cu yd). |
| Transmission | Planetary power-shift, 6 forward speeds. |
Service capacities (summary)
| Fuel tank | 1,893 L (500 gal). |
| Hydraulic, engine oil, and cooling system capacities | Not separately documented for this generation in available dealer/spec references. Verify against the machine's service manual before planning a service interval. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
785B fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase, with filter (Cat 3512 EUI direct-injection diesel) | approx. 204 L (54 US gal). Figure documented for the 785C on the same chassis platform; not independently published for 785B specifically, capacity varies by configuration/series. | Cat DEO (Diesel Engine Oil, API CI-4/CI-4 PLUS). SAE 15W-40 for ambient temperatures 14F to 122F (-10C to 50C). SAE 10W-30 for 0F to 104F (-18C to 40C). Cat DEO Cold Weather SAE 0W-40 for cold-soaked starts down to -40F (-40C). Commercial oils meeting Cat ECF-1-a, ECF-2, or ECF-3 are acceptable second-choice alternatives. |
| Cooling system | approx. 379 L (100 US gal). 785C figure on the same chassis platform; not independently confirmed for 785B, treat as approximate. | Cat DEAC (Diesel Engine Antifreeze/Coolant) or current Cat ELC (Extended Life Coolant). Minimum 30 percent glycol required, 50 percent glycol and water recommended for freeze protection to -34F (-37C); up to 60 percent glycol for arctic protection to -62F (-52C). Maintain nitrite level with periodic Cat SCA additions on conventional coolant. |
| Fuel tank | approx. 1893 L (500 US gal). 785C figure; not independently confirmed for 785B. | No. 2-D diesel fuel per ASTM D975 (No. 1-D winter blend in cold climates). Fuel spec, not a lubricant. |
| Power shift transmission (dedicated oil tank and circuit, six-speed powershift) | Not documented in available sourcing for this machine. Capacity varies by configuration/series; verify with dealer or parts book. | Cat TDTO (Transmission/Drive Train Oil). SAE 10W factory-fill grade for -4F to 50F (-20C to 10C). SAE 30 for 32F to 122F (0C to 50C). Cat TDTO Cold Weather SAE 0W-20 down to -40F (-40C). Cat TDTO-TMS multi-grade for wide seasonal swings. |
| Hoist, torque converter, and brake system (combined circuit, own tank) | Tank approx. 337 L (89 US gal); full system including tank approx. 641 L (169 US gal). 785C figures on the same chassis platform; not independently confirmed for 785B, treat as approximate. | Cat TDTO. SAE 10W factory-fill grade for -4F to 122F (-20C to 50C). Cat TDTO Cold Weather SAE 0W-20 down to -40F (-40C). |
| Steering hydraulic system (own tank) | Tank approx. 90 L (24 US gal); full system including tank approx. 117 L (31 US gal). 785C figures; not independently confirmed for 785B, treat as approximate. | Cat HYDO Advanced preferred, or Cat TDTO, graded by climate: SAE 10W for -4F to 104F (-20C to 40C), SAE 20 for 23F to 113F (-5C to 45C), SAE 30 for 50F to 122F (10C to 50C). Cat Bio HYDO Advanced where biodegradable fluid is required, -22F to 113F (-30C to 45C). |
| Differentials, front wheels, and final drives (combined, both sides) | approx. 436 L (115 US gal). 785C figure; final drive ratios (2.10:1 differential, 10.83:1 planetary, 22.75:1 total reduction) are unchanged across 785 generations, so this capacity is a reasonable proxy but not independently confirmed for 785B. | Cat FDAO (Final Drive and Axle Oil) SAE 60, factory-fill grade, for 14F to 122F (-10C to 50C). Cat FDAO SYN multi-grade for extreme cold or hot service, -13F to 122F (-25C to 50C). |
| Grease points (chassis pin joints, wheel and hoist cylinder bearings, steering linkage, autolube system, fan drive bearings) | Spec only, not a bulk-fill capacity. | Cat Extreme Application Grease NLGI 1 (cold climates, -31F to 104F / -35C to 40C) or NLGI 2 (-22F to 122F / -30C to 50C) for high load-factor autolube and chassis points. Cat Prime Application Grease NLGI 2 for medium load factor. Cat Utility Grease NLGI 2 for low load factor or light-duty points. Cat Ball Bearing Grease NLGI 2 for fan drive bearings. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 785B maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the 785B beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S oil analysis on the 3512 EUI's crankcase, the combined transmission/torque-converter/brake-hoist circuit, and the final-drive/differential sump on a fixed cycle; wear-metal trends flag injector, turbocharger, and planetary bearing wear before it shows up in service. Track coolant condition and glycol concentration separately from oil sampling. Where VIMS is fitted, log payload cycles and system alerts alongside sample results. Check suspension-cylinder nitrogen/oil charge with a soap-and-water test at each valve rather than waiting for visible sag.
Corrective & Common Repairs
Fuel pressure drop is the most common shutdown cause on the 3512 EUI fuel system; check the primary and secondary filters and water separators before chasing an injector. Chafed harness wiring and corroded connectors at the injector and sensor circuits cause erratic running or false derates. Suspension-cylinder charge-valve leakage and worn planetary final-drive guide-rod bushings are recurring wear items on high-hour units. Cracking at spring hangers, cross members, and body/hoist mounting points needs weld repair verified by a qualified tech before the truck returns to load.
Overhaul & Rebuild Points
Plan the 3512 EUI's top-end work (injector packs, turbocharger cartridges, cylinder liners) around oil-analysis trend data rather than a fixed hour figure. The six-speed powershift transmission and double-reduction planetary final drives are durable, but expect clutch-pack, bearing, and reaction-pin bushing rebuilds at high hours. Oil-cooled multiple-disc brakes and hoist cylinders need periodic reseal and pack inspection. Structural rebuild candidates are the frame at hoist/body mounts and spring hangers, and the suspension-cylinder nitrogen/oil charge, both of which wear well before the driveline itself.
Seasonal & Environment Servicing
Match engine, transmission/brake-hoist, and final-drive oil viscosity grade to ambient temperature at each seasonal changeover; cold-soak starts below -18C (0F) need cold-weather oil grades and coolant glycol concentration near maximum freeze protection. In hot, dusty pit conditions check the aftercooler and radiator core for packed dust more often, since a restricted core drives brake-cooling and retarder oil temperature up on grade. High-altitude sites should have turbocharger boost performance rechecked. Tire heat cycling accelerates in hot climates; step up inspection for cuts and casing damage.
785B common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1D-4540 | Bolt,Machine Fuel Filter Mounting | Fuel system service | Check fitment → |
| 1R-0755 | Filter As-Fuel | Fuel system service | Check fitment → |
| 111-0716 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 141-7903 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 6T-9504 | Filter Element As-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
785B fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 253-02 | Personality module data erratic, intermittent, or incorrect | ECM rating (personality) module not communicating cleanly, often from a corroded or loose module connector | Inspect and reseat the personality module connector, clear moisture/corrosion, then check the module rating with the service tool before condemning the module |
| CID 254-12 | Electronic control module has a bad internal device or component | Internal ECM hardware fault, sometimes triggered by a sustained power or ground circuit problem feeding the module | Verify battery voltage and ECM ground circuits first; if supply is clean, reflash or replace the ECM |
| CID 1-05 | Cylinder injector solenoid current below normal or open circuit | Broken or unplugged injector harness wiring, or a failed injector solenoid coil on that cylinder | Check the injector harness connector and wiring for that cylinder, then measure solenoid coil resistance against spec |
| CID 190-08 | Engine speed/timing sensor signal has an abnormal frequency or pulse pattern | Sensor air gap out of spec, damaged sensor wiring, or debris on the timing wheel disrupting one of the two speed/timing sensors | Check sensor air gap and connector condition, inspect the timing wheel for damage or debris, then verify with the service tool that both sensors agree |
| CID 102-03 | Boost pressure sensor voltage above normal or open circuit | Damaged sensor wiring, a loose or corroded connector, or a failed boost pressure sensor | Inspect the sensor connector and harness for damage, confirm sensor supply voltage, then replace the sensor if wiring checks out good |
| CID 110-04 | Coolant temperature sensor voltage below normal or short to ground | Chafed harness wiring shorting to ground, a wet/corroded connector, or a failed sensor | Inspect wiring and connector for a ground short, then test sensor resistance at a known coolant temperature against spec |
| CID 100-01 | Engine oil pressure reading valid but below normal range | Low engine oil level, a restricted oil filter, or worn oil pump/bearings reducing actual system pressure | Shut the engine down safely, check oil level and cross-check pressure with a manual gauge before restarting |
| CID 41-04 | 8-volt sensor supply voltage below normal or short to ground | A shorted sensor or chafed wiring on the shared low-voltage sensor supply circuit, which can trip several sensor codes at once | Disconnect sensors fed by the shared supply one at a time to isolate the short, then repair the chafed wiring or replace the faulty sensor |
| CID 168-00 | Electrical system (battery) voltage valid but above normal range | Charging system overcharging, typically a faulty voltage regulator or alternator | Check charging system output with a multimeter against spec and inspect the alternator/regulator |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
785B attachments & work tools
Dump body - standard Dual Slope
Cat-design steel dump body integrated onto the mainframe as a unit, mounted on the hoist/pivot points rather than a quick-coupler system. Dual Slope profile gives low center of gravity and even load distribution, offered in lined and unlined configurations depending on material abrasiveness.
Dump body - application-specific bodies
High-volume bodies for coal-type or low-density material and bodies tuned for sticky/abrasive ground conditions are part of the broader 785-size body lineup. Confirm which specific body menu applied to a given 785B build era with a dealer, since later-generation catalogs list a wider body range than the B-series originally offered.
Body wear liners and impact protection
Bolt-in or welded impact and wear liner packages (heavy-gauge or high-hardness steel plate) protect high-wear floor and side zones; central impact zones typically use thicker base plate to cut added liner weight. Unlined body remains an option where hauled material is non-abrasive.
Tailgate and ejector configuration
Standard body ships with a tailgate and reinforced tail rib to resist damage during the dump cycle. A tailgate-eliminated (open) body is offered for free-flowing or sticky material to reduce carryback and downtime, at the cost of some heaped capacity.
Body accessories - capacity and spillage control
Tail extensions, sideboards, rock boxes/rock shedders and tumble bars are available across the 785 body range to raise heaped capacity, cut spillage, or protect against oversize material, matched to the specific haul material rather than sold as a single fixed kit.
Tire and rim package
Class-standard fitment is a 610 mm (24 in) rim with a 33.00-R51 radial tire; a 660 mm (26 in) rim is optional, and a quick-change rim design is offered as an option to speed tire changes. Final tire selection should be checked against TKPH/TMPH duty for the haul cycle.
Engine and drivetrain arrangement
785B uses the Cat 3512 EUI diesel engine paired with a six-speed planetary powershift transmission and double-reduction planetary full-floating final drives - a mechanical-drive arrangement, not electric drive. Published horsepower figures online often reflect the later 785C's uprated 3512B-EUI rating rather than the B-series; verify the exact 785B rating against a period spec sheet.
Onboard payload/health monitoring (VIMS)
Vital Information Management System (VIMS) is available across the 785 truck line for real-time payload, cycle-time, and machine-health data. Whether it was factory-standard or a dealer-installed option on a given 785B serial range varies by configuration/series - verify against the specific unit's build sheet.
ROPS/FOPS cab structure
Integral, sound-suppressed ROPS/FOPS cab is resiliently mounted to the mainframe to isolate the operator from noise and vibration; this cab arrangement is consistent across the 785 truck line for operator protection and comfort.
Bare-chassis / service-truck conversion platform
Cat has offered a bare-chassis version of the 785 platform (with or without hoist cylinders) for third-party conversion into water, fuel/lube, or tow-truck bodies, with tanks and specialty bodies fitted by outside suppliers. This program is best documented for later 785 generations - confirm availability and rated tank/body capacity for the 785B specifically with a dealer.
All 785B assemblies by section
Every catalogued assembly group for the Caterpillar 785B. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
2w-0730 Aftercooler Gp-Water
| 03***30 | Bolt-Self Locking; (5/16unc X 3/4) | 22 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
4w-5160 Air Cleaner Gp -Lh
| 00***50 | Retainer; (Ring) | 1 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 8 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 1 |
4w-5159 Air Cleaner Gp -Rh
| 00***50 | Retainer; (Ring) | 1 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 8 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 1 |
1w-5254 Air Cleaner Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 8 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
| 1D***17 | Nut-Plate And Angle Assembly To Hydraulic And Fuel Tanks; Nut Plate And Angle Assembly To Hydraulic And Fuel Tanks | 8 |
7e-9491 Cartridge Gp-Turbocharger
| 1N***65 | Collar-Thrust | 1 |
| 1N***11 | Locknut-Turbocharger; (7/16-20-Thd) | 1 |
| 1N***05 | Spacer-Thrust | 1 |
102-0302 Cartridge Gp-Turbocharger
| 10***02 | Cartridge Group-Turbocharger | 1 |
| 10***40 | Ring-Seal | 1 |
| 10***42 | Kit-Cartridge; (Turbocharger) | 1 |
5t-6763 Exhaust Ar-Body -Heat
| 5T***47 | Guard Group-Platform | 1 |
| 5T***63 | Exhaust Ar-Body; -Heat | 1 |
| 8X***85 | Pipe Group-Exhaust; -Heated Body | 1 |
1w-5225 Lines Gp-Air -Air Inlet
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 12***79 | Clamp-V-Band | 2 |
| 12***12 | Support-Exhaust Pipe; (Lh)(Lh) | 1 |
6i-2971 Lines Gp-Air -Air Cleaner
| 0A***26 | Fitting | 2 |
| 13***92 | Clamp As | 6 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 1 |
2w-0212 Manifold Gp-Exhaust
| 11***71 | Manifold-Exhaust; (Intermediate) | 6 |
| 11***72 | Manifold-Exhaust; (Front Rh) | 2 |
| 11***73 | Manifold-Exhaust; (Rh Rear, Lh Front) | 2 |
1w-5255 Muffler Gp
| 1K***72 | Locknut Horn To Guard | 7 |
| 1W***05 | Clamp | 1 |
| 1W***61 | C-Clamp | 1 |
8x-0485 Pipe Gp-Exhaust -Heated Body
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 12 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 8 |
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 8 |
4p-4463 Shield Gp-Exhaust
| 03***35 | Bolt-Locking; (5/16-18x0.625-In) | 39 |
| 1W***39 | Shield As-Manifold | 1 |
| 1W***41 | Shield As-Manifold | 1 |
7w-5465 Turbocharger Gp
| 11***58 | Turbocharger Group | 2 |
| 12***36 | Gasket; (Turbocharger) | 2 |
| 2N***65 | Bolt-High Temperature; (3/8-16x1.75-In) | 8 |
7e-9492 Turbocharger Gp
| 1W***95 | Plate-Identification; (Turbocharger Cartridge) | 1 |
| 2A***62 | Screw,Cap,Hexagon H Diode Pig Tail To Grd; (1/4-20x.625 In) | 4 |
| 2F***08 | Screw; (6x0.25-In)(0 X 1/4 X In) | 2 |
115-2258 Turbocharger Gp
| 10***02 | Cartridge Group-Turbocharger | 1 |
| 11***58 | Turbocharger Group | 1 |
| 11***08 | Housing-Turbine | 1 |
102-0303 Turbocharger Gp
| 10***02 | Cartridge Group-Turbocharger | 1 |
| 10***03 | Turbocharger Group | 1 |
| 2A***62 | Screw,Cap,Hexagon H Diode Pig Tail To Grd; (1/4-20x.625 In) | 4 |
Basic Engine
1w-8924 Air Compressor Gp
| 1D***40 | Bolt,Machine Fuel Filter Mounting | 2 |
| 1W***24 | Air Compressor Group | 1 |
| 2S***23 | Cover As; (Governor) | 1 |
113-8193 Air Compressor Gp
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 3 |
| 11***51 | Air Compressor Group | 1 |
| 11***93 | Air Compressor Group | 1 |
117-0070 Air Compressor Gp
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 6 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 8 |
| 11***29 | Pan | 1 |
160-9845 Air Compressor Gp
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 6 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 8 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
117-0071 Air Compressor Gp
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 3 |
| 11***70 | Air Compressor Group | 1 |
| 11***71 | Air Compressor Group | 1 |
110-2751 Air Compressor Gp
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 6 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 8 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
2w-0582 Air Compressor Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 6 |
| 1W***30 | Pan | 1 |
1w-3893 Belt Tensioner Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
7e-5320 Camshaft Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 13***12 | Camshaft As | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 4 |
8n-9641 Cover Gp-Cylinder Block
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 72 |
2w-0204 Cover Gp-Flywheel Housing
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 39 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
2w-0202 Cover Gp-Front Housing
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 0S***92 | Bolt--Cover To Flywheel Housing | 2 |
| 10***85 | Cover As | 1 |
101-0831 Cover Gp-Valve Mechanism
| 10***31 | Cover Group-Valve Mechanism | 1 |
| 10***97 | Cover | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
7e-8756 Cover Gp-Valve Mechanism
| 10***97 | Cover | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
| 2W***72 | Seal-O-Ring; (221.62mm Id) | 1 |
8n-7103 Crankshaft Gp
| 12***45 | Bolt As; (5/8-18x4.25-In)(Counterweight) | 36 |
| 12***86 | Crankshaft As | 1 |
| 14***31 | Bearing As-Main; (Standard) | 7 |
7e-4940 Cylinder Block As
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
| 5P***49 | Washer (For Non-R.O.P.S. & Rollover Group) | 28 |
| 7E***40 | Cylinder Block As | 1 |
101-1227 Cylinder Block As
| 10***27 | Cylinder Block As | 1 |
| 11***93 | Liner-Cylinder | 12 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
106-2779 Cylinder Block As
| 10***79 | Cylinder Block As | 1 |
| 22***96 | Cap-Crankshaft Bearing | 7 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 3 |
100-8026 Cylinder Block As
| 10***26 | Cylinder Block As | 1 |
| 21***26 | Liner-Cylinder Block | 12 |
| 22***96 | Cap-Crankshaft Bearing | 7 |
101-1241 Cylinder Block As
| 10***41 | Cylinder Block As | 1 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
| 5P***49 | Washer (For Non-R.O.P.S. & Rollover Group) | 28 |
4p-7263 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 2 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 4 |
4p-9892 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 12 |
115-5154 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 10***79 | Cylinder Block As | 1 |
| 11***54 | Cylinder Block Group | 1 |
115-3505 Cylinder Block Gp
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 3 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 12 |
| 10***26 | Cylinder Block As | 1 |
101-1244 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 10***41 | Cylinder Block As | 1 |
| 10***44 | Cylinder Block Group | 1 |
131-4339 Cylinder Head As
| 13***13 | Guide-Valve; (Standard) | 4 |
| 13***11 | Cylinder Head As | 1 |
| 13***39 | Cylinder Head As | 1 |
172-0838 Cylinder Head As
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 17***36 | Cylinder Head As | 1 |
131-0411 Cylinder Head As
| 13***07 | Insert-Valve Seat; (Standard)(Intake) | 2 |
| 13***08 | Insert-Valve Seat; (Standard)(Exhaust) | 2 |
| 13***11 | Cylinder Head As | 1 |
7e-8760 Cylinder Head As
| 11***91 | Insert-Valve Seat; (Exhaust) | 2 |
| 14***45 | Insert-Valve Seat; (0.508-mm Os Od)(Inlet) | 0 |
| 14***46 | Insert-Valve Seat; (Exhaust 0.51-mm Os Od)(Exhaust) | 0 |
172-0836 Cylinder Head As
| 13***07 | Insert-Valve Seat; (Standard)(Intake) | 2 |
| 13***08 | Insert-Valve Seat; (Standard)(Exhaust) | 2 |
| 14***81 | Insert-Valve Seat; (0.51-mm Os Od)(Intake) | 0 |
7e-8759 Cylinder Head Gp
| 12***39 | Valve-Exhaust | 2 |
| 13***11 | Cylinder Head As | 1 |
| 13***14 | Rotocoil As | 4 |
7e-8758 Cylinder Head Gp
| 11***91 | Gasket-Cylinder Head | 1 |
| 12***12 | Seal-Water; (11.2mm Id) | 4 |
| 12***13 | Seal-Water; (21.2mm Id) | 4 |
156-9137 Cylinder Head Gp
| 12***39 | Valve-Exhaust | 2 |
| 13***11 | Cylinder Head As | 1 |
| 13***14 | Rotocoil As | 4 |
8n-7182 Damper Gp
| 19***88 | Damper As | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 10 |
| 5P***50 | Washer-Front Support Frame Assembly To | 6 |
9y-7687 Damper Gp
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 10 |
| 5M***09 | Plug-Expansion | 2 |
| 7B***35 | Bolt, Bolt,Machine Grab Iron Mounting Applicable W/O Rops | 10 |
105-2274 Drive Ar-Fan -Variable Speed
| 10***74 | Drive Ar-Fan; -Variable Speed | 1 |
| 10***02 | Drive Ar-Fan; -Variable Speed | 1 |
| 10***42 | Control Group-Fan; -Variable Speed | 1 |
105-2271 Drive Ar-Fan -Non-Variable Speed
| 03***37 | Bolt-Self Locking; 3.81cm(1.5 In.)Long | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
129-2001 Drive Ar-Fan -Variable Speed
| 12***19 | Lines Group-Fan Drive; -Variable Speed | 1 |
| 12***96 | Drive Group-Fan; -Variable Speed | 1 |
| 12***33 | Control Group-Fan; -Variable Speed | 1 |
128-9734 Drive Ar-Fan -Variable Speed
| 12***34 | Drive Ar-Fan; -Variable Speed | 1 |
| 12***86 | Control Group-Fan; -Variable Speed | 1 |
| 12***01 | Drive Ar-Fan; -Variable Speed | 1 |
105-4702 Drive Ar-Fan -Variable Speed
| 10***64 | Drive Group-Fan; -Variable Speed | 1 |
| 10***10 | Lines Group-Hydraulic Fan; -Variable Speed | 1 |
| 10***02 | Drive Ar-Fan; -Variable Speed | 1 |
9y-1595 Drive Gp-Accessory -Pump Drive
| 10***24 | Seal As; (Lip Type) | 1 |
| 13***98 | Bearing-Sleeve | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 4 |
4p-0853 Drive Gp-Accessory -Upper, Rh
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***00 | Bearing-Sleeve | 2 |
1w-8704 Drive Gp-Auxiliary -Water Pump
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
| 1D***72 | Bolt- 13.97cm(5.5 In.)Long-Location "A" | 2 |
| 1T***20 | Bolt-12 Point Head; (3/8-16x1.25-In) | 2 |
115-0597 Drive Gp-Auxiliary -Water Pump
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
| 10***79 | Adapter As | 1 |
| 10***76 | Shaft As-Pump Drive | 1 |
105-4266 Drive Gp-Fan -Crankshaft
| 10***66 | Drive Group-Fan; -Non-Variable Speed | 1 |
| 4W***50 | Pulley-Crankshaft; (8-Groove) | 1 |
| 4W***26 | Kit-Bushing; (Crankshaft Pulley)(Non-Flanged) | 1 |
105-4264 Drive Gp-Fan -Variable Speed
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 10***28 | Pulley-Fan Drive | 1 |
| 10***05 | Drive Group-Fan; -Variable Speed | 1 |
123-6996 Drive Gp-Fan -Variable Speed
| 0S***73 | Bolt (102mm Long); (1/2-13x4-In) | 8 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 10***28 | Pulley-Fan Drive | 1 |
100-8105 Drive Gp-Fan -Variable Speed
| 10***05 | Drive Group-Fan; -Variable Speed | 1 |
| 10***39 | Shaft As-Fan Clutch | 1 |
| 10***41 | Retainer-Bearing | 1 |
7w-7285 Drive Gp-Fan -Crankshaft
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
| 11***79 | Shaft-Tightener | 1 |
107-0784 Drive Gp-Fan -Non-Variable Speed
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
| 10***84 | Drive Group-Fan; -Non-Variable Speed-High Altitude Application | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 8 |
133-5969 Drive Gp-Fan -Variable Speed
| 00***00 | Screw; (5/8-11x1-In) | 8 |
| 10***41 | Retainer-Bearing | 1 |
| 10***42 | Ring-Snap | 1 |
9y-7669 Flywheel Gp
| 5P***39 | Washer-Hard; (28x42x4-mm Thk) | 12 |
| 8N***96 | Gear (151 Teeth) | 1 |
| 9S***93 | Bolt-12 Point Head; (1-14x101.6-mm) | 12 |
8n-7174 Gear Gp-Front -Standard Rotation
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 5 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
7e-5323 Gear Gp-Rear
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 12***50 | Bearing-Sleeve | 1 |
| 1B***67 | Bolt, Hex. Hd., 5/8"-11 N.C. X 3" | 4 |
112-5674 Gear Gp-Rear -Cam Drive
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 10***65 | Plate-Thrust | 1 |
| 10***68 | Washer-Thrust; (19.50 X 106 X 1.9mm Thk) | 2 |
4n-9680 Governor Gp-Air Compressor
| 2K***98 | Seal-O-Ring | 1 |
| 2S***23 | Cover As; (Governor) | 1 |
| 4N***80 | Governor Group-Air Compressor | 1 |
4p-3747 Guard Gp-Belt -Alternator
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 16***11 | Guard As; (Alternator) | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 2 |
7e-9086 Housing Gp-Flywheel
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 7 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 2 |
| 1D***74 | Bolt (L.H. Side Flywheel Housing) | 7 |
106-7600 Housing Gp-Flywheel
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 7 |
| 10***67 | Adapter | 1 |
| 10***98 | Housing As-Flywheel | 1 |
4p-5426 Housing Gp-Front -Accessory Drive
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 10***34 | Housing-Accessory Drive | 1 |
| 1B***18 | Washer; (25/64 X 5/8 X .064in Thk) | 6 |
8n-7734 Lifting Gp-Engine
| 15***26 | Bracket As | 2 |
| 2B***95 | Cap Screw--Tube Assembly To Air Inlet Pipe | 4 |
| 5P***48 | Washer--Bracket To L.H. Support Rail | 4 |
2w-0194 Lines Gp-Air Compressor
| 03***69 | Elbow-Flared; (1/2-14 Nptf) | 5 |
| 06***17 | Elbow-Flared | 1 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 1 |
115-0596 Lines Gp-Air Compressor
| 03***69 | Elbow-Flared; (1/2-14 Nptf) | 6 |
| 06***17 | Elbow-Flared | 1 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 1 |
7e-4836 Mounting Gp-Alternator
| 05***65 | Sleeve | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 14***16 | Belt-Serpentine; (Alternator) | 1 |
2w-0205 Pan Gp-Oil
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 10***62 | Dowel | 2 |
6i-2861 Piston & Rod Gp
| 10***30 | Bearing-Connecting Rod; (Standard) | 1 |
| 10***31 | Bearing-Connecting Rod; (0.63-mm Us Id) | 0 |
| 10***32 | Bearing-Connecting Rod; (1.27-mm Us Id) | 0 |
7w-3813 Seal Gp-Crankshaft
| 11***32 | Seal Group-Crankshaft; (Cw Rotation) | 1 |
| 11***33 | Seal Group-Crankshaft; (Ccw Rotation) | 1 |
| 7W***13 | Seal Group-Crankshaft | 1 |
7c-2655 Support Gp-Engine
| 1B***09 | Bolt-- Head To Cylinder Block | 8 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 4 |
| 2N***06 | Bolt-12 Point Head | 6 |
251-7646 Support Gp-Fan Drive
| 11***79 | Shaft-Tightener | 1 |
| 25***45 | Shaft | 1 |
| 25***46 | Support Group-Fan Drive | 1 |
7n-1863 Trunnion Gp-Engine
| 1D***66 | Bolt Bracket Assembly To Yoke | 20 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 20 |
| 5P***46 | Washer-Hard; (15.5x29x3-mm Thk) | 16 |
7e-5314 Valve Mechanism Gp
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
| 12***24 | Base As | 1 |
Braking System
2g-6535 Slack Adjuster Gp -Front
| 2G***02 | Spring | 2 |
| 2G***35 | Slack Adjuster Group; -Front Service Brake Lines | 1 |
| 2G***82 | Base | 1 |
6g-9881 Slack Adjuster Gp -Rear
| 1S***90 | Spring-Diaphragm | 2 |
| 2G***82 | Base | 1 |
| 2H***45 | Retainer,Packing Body Part Of Kit P/N 4j***80 | 2 |
5t-0917 Air Dryer Gp
| 2G***34 | Valve-Air Relief | 1 |
| 2G***59 | Air Dryer Group | 1 |
| 2G***82 | Kit-Cartridge; (Replacement)(Incl. Cartridge,Balls,& Seals) | 1 |
6g-9385 Brake Gp-Service & Parking -Tractor Rear
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 24 |
| 10***04 | Housing | 2 |
| 10***06 | Anchor-Brake | 2 |
5t-3280 Brake Gp-Service & Parking -Front
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 16 |
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 70 |
| 10***09 | Anchor-Brake | 2 |
8x-9717 Brake Gp-Service & Parking -Rear
| 0S***20 | Bolt--Customer Grounding Bolt | 6 |
| 10***04 | Housing | 1 |
| 10***06 | Anchor-Brake | 1 |
8x-9702 Brake Gp-Service & Parking -Tractor Front
| 0S***20 | Bolt--Customer Grounding Bolt | 6 |
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 35 |
| 10***10 | Housing | 1 |
8w-4438 Control Gp-Brake -Chassis
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 5 |
| 00***54 | Nipple-Pipe | 4 |
| 03***77 | Tee-Pipe | 2 |
5t-6544 Control Gp-Brake -Cab
| 4D***78 | Valve Group-Air Control; -Parking Brake Switch | 1 |
| 4H***47 | Union; - Use When Relocating Air Override Valve To R.H. Side Panel If Equipped With Attachment Parking Brake Control | 1 |
| 4S***27 | Hose Assem. (53" Long Overall) | 1 |
262-1992 Control Gp-Brake
| 26***92 | Control Group-Brake | 1 |
| 4D***78 | Valve Group-Air Control; -Parking Brake Switch | 1 |
| 4H***47 | Union; - Use When Relocating Air Override Valve To R.H. Side Panel If Equipped With Attachment Parking Brake Control | 2 |
135-6915 Control Gp-Service Brake -Cab
| 03***44 | Bolt-Eye; ( X) | 1 |
| 13***15 | Control Group-Service Brake; -Cab | 1 |
| 14***01 | Setscrew | 2 |
2a-6499 Control Gp-Service Brake -Cab
| 00***33 | Tee-Pipe | 1 |
| 03***44 | Bolt-Eye; ( X) | 1 |
| 2A***99 | Control Group-Service Brake; -Cab | 1 |
257-7000 Control Gp-Service Brake
| 03***44 | Bolt-Eye; ( X) | 1 |
| 13***58 | Plate As | 1 |
| 14***01 | Setscrew | 2 |
9t-7204 Cylinder Gp-Air -Tc, Front Brake Cooling-Park, Secondary Brake
| 2K***91 | Ring-Retaining | 1 |
| 5P***47 | Seal-Lip; (25.48 mm Od) | 1 |
| 6E***57 | Kit-Seal; (Hydraulic Cooling) | 1 |
8x-7220 Cylinder Gp-Air/Hydraulic -Brake
| 25***38 | Valve | 1 |
| 31***27 | Kit-Brake Cylinder; (Brake) | 1 |
| 6W***05 | Expander Ring | 1 |
8w-3406 Cylinder Gp-Air/Hydraulic -Brake
| 13***31 | Seal | 1 |
| 25***38 | Valve | 1 |
| 2F***16 | Nut (Mounted On Flywheel Housing) | 8 |
115-9177 Hose Gp-Air -Gauge
| 11***77 | Hose Group-Air; -Gauge-Brake Pressure | 1 |
| 3B***87 | Coupling; (Pipe) | 1 |
| 3S***15 | Tee; -- Adapter Union-- To Check Valve On Warning System Reservoir | 1 |
8w-4443 Lines Gp-Brake
| 03***17 | Union | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 1 |
| 1P***76 | Flange-Half (Hose To Pump); Flange-Half (32.54mm Bore) | 2 |
8w-4442 Lines Gp-Service Brake -Front
| 2G***35 | Slack Adjuster Group; -Front Service Brake Lines | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
5t-1060 Pump & Motor Gp-Brake Release -Parking, Secondary
| 01***80 | Lockwasher | 8 |
| 1T***16 | Bolt; (5/16-18x0.75-In)(12 Point Hd) | 4 |
| 1V***95 | Coupling | 1 |
2a-6515 Retarder Ar-Automatic
| 2A***15 | Retarder Ar-Automatic | 1 |
| 2A***17 | Control Group-Retarder; -Automatic-Electrical | 1 |
| 2A***18 | Control Group-Retarder; -Automatic | 1 |
5t-0885 Tank Gp-Air -Chassis-Air Tank
| 1D***19 | Nut-Retainer To Fan Bracket Assembly | 4 |
| 2K***55 | Pin (Spring) | 1 |
| 3H***42 | Seal; (Included In Seal Kit) | 1 |
2a-6504 Tank Gp-Air -Cab
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***40 | Reservoir | 1 |
| 2A***04 | Tank Group-Air; -Cab-Secondary | 1 |
6e-1851 Tank Gp-Brake
| 1A***58 | Bolt 1.75 In. (44.45 mm) Long | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
3e-8978 Valve & Mounting Gp -Automatic Retarder
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***15 | Switch As-Pressure; (Auto Retarder Control) | 1 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
127-4661 Valve & Mtg Gp-Brake -Automatic Retarder
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Switch As-Pressure; (Tractor Brake) | 1 |
| 12***61 | Valve & Mtg Group-Brake; -Automatic Retarder | 1 |
217-7906 Valve & Mtg Gp-Brake
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Switch As-Pressure; (Tractor Brake) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
7d-8075 Valve Gp-Air Control
| 00***83 | Ring-Snap | 1 |
| 1S***12 | Retainer-Valve | 1 |
| 4D***89 | Valve Assem. | 1 |
4d-0487 Valve As-Check -Primary Air Tank
| 4D***87 | Valve As-Check; -Air Supply-Primary Air Tank-Service Brake Control | 1 |
4d-3278 Valve Gp-Air Control -Parking Brake
| 3H***07 | Seal-O-Ring; (21.82mm Id) | 1 |
| 4D***78 | Valve Group-Air Control; -Parking Brake Switch | 1 |
| 5D***33 | Nut-Cap | 1 |
113-1543 Valve Gp-Brake -Parking, Secondary
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 2 |
| 11***72 | Valve Group-Relief; -Parking, Secondary Brake | 1 |
| 11***43 | Valve Group-Brake; -Automatic Retarder-Park, Secondary Brake | 1 |
9t-4772 Valve Gp-Brake -Parking, Secondary
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 2 |
| 06***56 | Seal-O-Ring | 1 |
| 1K***66 | Spring-Compensator | 1 |
9t-3096 Valve Gp-Check -Electric Pump Drive
| 9T***96 | Valve Group-Check; -Dead Engine, Lift Arm Lower | 1 |
6d-3781 Valve Gp-Check -Automatic Retarder
| 2R***32 | Guide-Shuttle | 1 |
| 2R***13 | Cap | 1 |
| 3D***45 | Seal-Bottle To Connector | 1 |
1u-2644 Valve Gp-Check -Park, Secondary Brake
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 1U***44 | Valve Group-Check; -Secondary, Parking Brake | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
9t-7205 Valve Gp-Diverter -Tc, Front Brake Cooling
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 2 |
| 06***56 | Seal-O-Ring | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
105-0170 Valve Gp-Diverter -Tc, Front Brake Cooling
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 2 |
| 06***56 | Seal-O-Ring | 1 |
| 10***75 | Spring | 1 |
6e-6305 Valve Gp-Relief -Parking, Secondary Brake
| 06***39 | Seal-O-Ring | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3G***54 | Cap | 1 |
113-1072 Valve Gp-Relief -Parking, Secondary Brake
| 06***39 | Seal-O-Ring | 1 |
| 11***72 | Valve Group-Relief; -Parking, Secondary Brake | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
9t-4770 Valve Gp-Relief -Park, Secondary Brake
| 06***39 | Seal-O-Ring | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3G***54 | Cap | 1 |
3e-8691 Valve Gp-Solenoid
| 10***17 | Cartridge As | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
189-8666 Valve Gp-Solenoid
| 10***17 | Cartridge As | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
Cooling System
9x-9482 Valve Gp-Solenoid
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
7e-5327 Connection Gp-Water -Outlet
| 11***94 | Cover | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 4 |
| 1W***64 | Elbow-Outlet | 1 |
4w-5892 Cooler Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 10***32 | Seal-O-Ring | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 6 |
141-4109 Core Gp-Oil Cooler
| 14***09 | Core Group-Oil Cooler; -Brake, Frame Mount-Transmission, Engine Mount-Tc, Bk, Hoist, Engine Mount | 1 |
| 8T***64 | Plug-Pipe; (1/8-27-Thd)(Cylinder Head) | 2 |
4w-4980 Core Gp-Oil Cooler -Engine
| 4W***80 | Core Group-Oil Cooler; -Engine | 1 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
| 9S***85 | Plug--To Seal Hydraulic Pump To Sump Of Limit System | 1 |
200-5975 Core Gp-Oil Cooler -Front, Rear Brake
| 20***75 | Core Group-Oil Cooler; -Front, Rear Brake-Torque Converter, Hoist, Brake | 1 |
| 8T***64 | Plug-Pipe; (1/8-27-Thd)(Cylinder Head) | 2 |
4w-5056 Core Gp-Oil Cooler -Transmission
| 4W***56 | Core Group-Oil Cooler; -Transmission | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
| 9S***91 | Plug,Machine Thread Fuel Injection Pump | 1 |
4w-0413 Core Gp-Oil Cooler -Torque Converter, Hoist, Brake
| 4W***13 | Core Group-Oil Cooler; -Rear Brake, Hoist-Front Brake, Tc | 1 |
| 5M***14 | Pipe Plug Cylinder Block Oil Pressure | 1 |
1n-3599 Cover Gp-Radiator Cap
| 1M***49 | Ring (5.313" Dia.) | 1 |
| 1N***99 | Cover Group-Protection; Radiator Cap Protection Cover Group | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
1w-5256 Fan Gp-Suction
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 7 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 16 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
106-4687 Fan Gp-Suction
| 10***86 | Guard As-Fan | 4 |
| 10***87 | Fan Group-Suction | 1 |
| 11***40 | Spider As-Fan | 1 |
183-7142 Gauge Gp-Coolant Level
| 10***84 | Dial | 1 |
| 18***42 | Gauge Group-Coolant Level; -Engine, Aftercooler | 1 |
| 1W***01 | Gasket | 1 |
6v-6704 Gauge Gp-Coolant Level
| 10***84 | Dial | 1 |
| 2F***06 | Screw-Machine (6-32x. 25in); (6-32x0.25-In) | 1 |
| 6V***04 | Gauge Group-Coolant Level; -Engine, Aftercooler | 1 |
4w-1510 Housing & Regulator Gp -Outlet Control
| 11***74 | Valve As-Vent Line | 1 |
| 12***32 | Housing As-Regulator | 1 |
| 24***13 | Regulator-Water Temperature; (92-Deg C)(Water, Coolant Temperature) | 4 |
7w-0486 Lines Gp-Water -Bypass
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 9 |
2w-0211 Lines Gp-Water -Aftercooler
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 1A***64 | Bolt (4.75 In. Long-Location "B") | 2 |
| 1W***72 | Retainer-Ring To Pump Flange | 4 |
1w-5222 Lines Gp-Water -Lower
| 00***89 | Valve As-Drain | 2 |
| 03***67 | Connector-Flared -- Adapter To Hose As. | 2 |
| 03***68 | Elbow (For Use With Shallow Pan) | 2 |
1w-0720 Lines Gp-Water -Turbocharger
| 03***70 | Tee | 2 |
| 06***08 | Bulkhead Tee | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
1w-5223 Lines Gp-Water -Brake Cooler Lines
| 12***94 | Elbow | 1 |
| 1W***23 | Lines Group-Water; -Brake Cooler Lines | 1 |
| 1W***98 | Bonnet | 1 |
7e-9220 Lines Gp-Water -Upper
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 32 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 46 |
| 12***56 | Gasket | 2 |
1w-0410 Pump Gp-Auxiliary Water
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
| 1T***32 | Seal-O-Ring; (234.54mm Id) | 1 |
| 1T***65 | Bolt 2.54 cm (1" Long) | 1 |
7e-9781 Pump Gp-Auxiliary Water
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***00 | Bearing-Sleeve | 1 |
166-4378 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 16***74 | Ring As | 1 |
| 16***76 | Seal Group-Water Pump; (Face Type) | 1 |
2w-9729 Pump Gp-Water
| 16***78 | Pump Group-Water; -Jacket Water | 1 |
| 1H***78 | Seal-O-Ring | 1 |
| 2W***29 | Pump Group-Water; Water Pump Group | 1 |
122-0500 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 12***50 | Seal Group-Face; (Water Pump) | 1 |
| 12***00 | Pump Group-Water | 1 |
2w-9728 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 16***76 | Seal Group-Water Pump; (Face Type) | 1 |
| 19***21 | Kit-Gasket; (Water Pump Rebuild) | 0 |
7e-2507 Radiator Gp -Folded Core
| 11***68 | Tank As-Top | 1 |
| 16***86 | Seal-End Tank; (Narrow End) | 26 |
| 16***87 | Seal-End Tank; (Wide End) | 26 |
1w-5232 Radiator Gp -Folded Core
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 02***41 | Bolt-Socket Head; (1/4-28x0.625-In) | 8 |
| 03***76 | Elbow-Flared | 1 |
127-4440 Shield Gp-Water Manifold
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 12***40 | Shield Group-Water Manifold | 1 |
| 18***86 | Plate As; (Lh) | 1 |
132-2163 Shutter Ar-Radiator
| 13***63 | Shutter Ar-Radiator | 1 |
| 13***64 | Shutter Group-Radiator | 1 |
| 13***68 | Wiring Group-Engine; -Shutter | 1 |
8w-9381 Shutter Gp-Radiator
| 06***36 | Bushing-Flanged | 24 |
| 1B***03 | Nut Exhaust Pipe To Starting Engine Cylinder Block | 4 |
| 1B***30 | Nut-- Flame Arrestor Or Adapter To Pipe Assembly | 192 |
8w-9382 Shutter Gp-Radiator
| 00***10 | Tee; (Pipe) | 2 |
| 10***12 | Switch; (Air Conditioning) | 1 |
| 10***44 | Harness As; (Air Conditioning) | 1 |
132-2164 Shutter Gp-Radiator
| 00***10 | Tee; (Pipe) | 2 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 10***12 | Seal; (Interface) | 1 |
6d-1039 Valve Gp-Air Control -Radiator Shutter Inversion
| 3P***59 | Spring | 1 |
| 6D***39 | Valve As; -Exhaust Bypass-Exhaust Diverter | 1 |
| 6F***72 | Seal (.674" Inside Diameter) | 1 |
Electrical And Starting System
3e-5191 Control Gp-Power Train -Transmission/Chassis
| 3E***91 | Control Group-Electronic; -Transmission/Chassis | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 5 |
104-4287 Control Gp-Power Train -Transmission/Chassis
| 10***87 | Control Group-Electronic; -Transmission/Chassis | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 5 |
125-5855 Control Gp-Electronic -Cat Monitoring System
| 12***55 | Control Group-Electronic; -Cat Monitoring System | 1 |
| 15***17 | Control Group-Monitor; -Cat Monitoring System | 1 |
106-2996 Control Gp-Electronic -Steering Warning
| 10***96 | Control Group-Electronic; -Steering Warning | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 3 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
9x-7823 Control Gp-Electronic -Steering Warning
| 10***96 | Control Group-Electronic; -Steering Warning | 1 |
| 9X***23 | Control Group-Electronic; -Steering Warning | 1 |
| 9X***11 | Film-Steering Warning | 1 |
132-3814 Control Gp-Electronic
| 13***14 | Control Group-Neutral Start Elek; (Neutral Start) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 7 |
7x-6398 Lamp Gp-Dome -Cab
| 4S***88 | Terminal; (Blade-Crimp Type)(Male) | 1 |
| 5P***71 | Terminal (To Flasher Unit & Turn Signal Switch) | 1 |
| 7N***43 | Lamp-Miniature; (Dome) | 1 |
7x-6399 Lamp Gp-Dome
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
9g-9813 Alarm Gp -Action-Action, Engine Overspeed
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
316-7251 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
9x-7803 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 4 |
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
197-8820 Alternator Gp-Charging
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***44 | Coil Assem. | 1 |
239-4254 Control & Mtg Gp-Electronic
| 10***59 | Spacer; (9x20x39.2-mm Thk) | 2 |
| 13***89 | Plate Assem. | 1 |
| 14***08 | Spacer; (10x19.5x61-mm Thk) | 2 |
7e-9084 Control & Mtg Gp-Engine Elek -Ecm-Advanced
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
235-8156 Control & Mtg Gp-Monitor
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***00 | Clip; (Tab) | 2 |
8x-9640 Control & Mtg Gp-Power Train -Transmission, Chassis
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 10***56 | Plate As | 2 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
255-8771 Control & Mtg Gp-Power Train
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 19***47 | Control Group-Power Train; -Transmission, Chassis | 1 |
| 1F***50 | Nut Rops Support | 2 |
5t-3207 Control Gp-Air Starting
| 1L***66 | Elbow-External Pipe Thread | 1 |
| 1L***22 | Connector-Pipe | 1 |
| 3B***52 | Elbow; --Cross To Hose Assembly To Air Gauge | 1 |
174-3493 Control Gp-Eng Ratings Elek
| 17***93 | Control Group-Eng Ratings Elek | 1 |
3e-5475 Control Gp-Eng Ratings Elek
| 10***00 | Control Group-Electronic | 1 |
| 3E***75 | Control Group-Eng Ratings Elek | 1 |
154-9145 Control Gp-Eng Ratings Elek
| 15***45 | Control Group-Eng Ratings Elek | 1 |
9g-9287 Control Gp-Engine Electronic -Engine Shutdown
| 1S***93 | Strap; (Cable) (0.62in Dia) | 3 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 4 |
9x-3207 Control Gp-Electronic
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 7N***81 | Housing-Receptacle; (14-Ga To 18-Ga) | 1 |
129-1986 Control Gp-Fan -Variable Speed
| 10***32 | Control Group-Electronic; (Coolant Temp Sensor) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 11***60 | Switch As-Pressure; (A/C Compressor) | 1 |
108-2842 Control Gp-Fan -Variable Speed
| 10***95 | Sensor; (Brake Oil Cooler Temp) | 1 |
| 10***12 | Switch; (Air Conditioning) | 1 |
| 10***44 | Harness As; (Air Conditioning) | 1 |
106-4709 Control Gp-Fan -Variable Speed
| 10***99 | Sensor As-Liquid Level; (Jacket Water Cooler Temp) | 1 |
| 10***88 | Harness As; (Fan Control) | 1 |
| 10***09 | Control Group-Fan; -Variable Speed | 1 |
128-9733 Control Gp-Fan -Variable Speed
| 12***33 | Control Group-Fan; -Variable Speed | 1 |
| 13***38 | Adapter | 1 |
| 3E***70 | Control Group-Electronic | 1 |
3e-3663 Control Gp-Machine -Automatic Retarder
| 10***88 | Control Group-Electronic; (Automatic Retarder) | 1 |
| 3E***63 | Control Group-Machine; -Automatic Retarder-Automatic Retarder | 1 |
| 3E***28 | Film-Instruction; (Automatic Retarder Control) | 1 |
3e-5390 Control Gp-Power Train -Transmission/Chassis
| 3E***91 | Control Group-Electronic; -Transmission/Chassis | 1 |
| 3E***90 | Control Group-Power Train; -Transmission/Chassis-Transmission, Chassis | 1 |
| 3E***14 | Film-Information; (Transmission Control) | 1 |
110-7491 Control Gp-Power Train -Transmission/Chassis
| 11***91 | Control Group-Power Train; -Transmission/Chassis | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***75 | Housing-Receptacle; (Receptacle) | 1 |
199-9847 Control Gp-Power Train -Transmission, Chassis
| 19***47 | Control Group-Power Train; -Transmission, Chassis | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***73 | Housing-Receptacle; (14-Ga To 18-Ga) | 1 |
121-2842 Control Gp-Power Train -Transmission/Chassis
| 12***42 | Control Group-Power Train; -Transmission/Chassis | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***75 | Housing-Receptacle; (Receptacle) | 1 |
199-9850 Control Gp-Power Train -Automatic Retarder Control-Automatic Retarder
| 19***50 | Control Group-Power Train; -Automatic Retarder Control-Automatic Retarder | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***73 | Housing-Receptacle; (14-Ga To 18-Ga) | 1 |
118-2452 Control Gp-Power Train -Transmisson/Chassis
| 11***52 | Control Group-Power Train; -Transmisson/Chassis | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***75 | Housing-Receptacle; (Receptacle) | 1 |
128-0869 Control Gp-Traction Electronic -Aeta
| 12***69 | Control Group-Traction Electronic; -Aeta | 1 |
| 12***80 | Film-Information; (Traction Control) | 1 |
| 13***38 | Control Group-Traction Electronic; (Aeta) | 1 |
160-4891 Control Gp-Unprogrammed
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 14***80 | Battery Group-Electronic Control; (Road Analysis/Vims Main Module) | 1 |
| 16***91 | Control Group-Unprogrammed; -Vims Main Module-Road Analysis Control | 1 |
6v-6702 Control Gp-Vids/Vims Main
| 16***82 | Control Group-Unprgmed Monitor; -Vids/Vims Main Module | 1 |
| 6V***02 | Control Group-Vids/Vims Main | 1 |
116-8903 Control Gp-Vids/Vims Main
| 11***03 | Control Group-Vids/Vims Main | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
| 3T***47 | Clip As-To Harness Connectors If 9g***54 | 1 |
3t-5438 Distributor Gp-Electronic -Transmission Speed
| 3T***38 | Distributor Group-Electronic; -Transmission Speed | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 3 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 4 |
6g-9462 Harness As-Wiring
| 5P***23 | Wire 4.55m (Br/Bk2); (1-Conn. Ether Starting System Sending Unit / 1-Conn. Solenoid Valve Ether Start System) | 0 |
| 6G***62 | Harness As | 1 |
| 7K***75 | Connector Assem. (Fuse Holder) | 6 |
8w-5255 Heater Gp-Fuel
| 00***12 | Connector-Flared | 1 |
| 03***69 | Elbow-Flared; (1/2-14 Nptf) | 1 |
| 03***34 | Elbow-Flared | 2 |
123-6882 Heater Gp-Jacket Water
| 12***82 | Heater Group-Jacket Water | 1 |
| 6N***04 | Cap As-Dust; (Jacket Water Heater Elements) | 3 |
| 6T***64 | Element As-Jacket Water Heater | 3 |
7c-1107 Heater Gp-Jacket Water
| 4D***94 | Clip-- Compressor Clutch Wire To Compressor Body | 7 |
| 7C***07 | Heater Group-Jacket Water | 1 |
| 7C***07 | Wire As-Heater | 3 |
8w-4065 Heater Gp-Engine Oil
| 14***52 | Box As | 1 |
| 15***06 | Panel | 1 |
| 2H***33 | Screw-Machine; (10-32x0.25-In) | 1 |
3t-3967 Lamp Gp-Signal -Parking, Turn
| 03***35 | Lamp-Miniature | 1 |
| 3T***67 | Lamp Group; -Parking, Turn | 1 |
| 7D***13 | Lens Kit - Amber (Consists Of Lens, Gasket And Screws)> | 1 |
9x-1439 Lamp Gp-Flood -Backup
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
3t-4411 Lamp Gp-Flood -Ladder Access
| 3T***11 | Lamp Group-Flood; -Hood Light-Ladder | 1 |
| 6N***87 | Lamp-Sealed Unit | 1 |
| 6T***79 | Body As-Lamp | 1 |
9x-4381 Lamp Gp-Flood -Backup
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
164-7600 Lamp Gp-Flood
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
| 16***00 | Lamp Group-Flood; -Engine Work, Rh, Lh-Stairway | 1 |
162-3294 Lamp Gp-Flood -Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
171-2065 Lamp Gp-Flood -Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***72 | Body As-Lamp | 1 |
6n-7989 Lamp Gp-Flood -Ladder Access
| 2P***68 | Moulding | 1 |
| 6N***87 | Lamp-Sealed Unit | 1 |
| 6N***88 | Body As-Lamp | 1 |
161-0908 Lamp Gp-Head
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
| 16***08 | Lamp Group-Head; -Fog Light | 1 |
9x-7165 Lamp Gp-Head -Low Beam, Vertical Mount-Low Beam
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 9X***55 | Body As-Lamp | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
171-2067 Lamp Gp-Head -High Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***49 | Lens As; (Headlight, High Beam) | 1 |
| 15***52 | Bezel | 1 |
168-1953 Lamp Gp-Head -Low Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***77 | Lens As; (Headlight, Low Beam) | 1 |
9x-7169 Lamp Gp-Head -Low Beam
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
9x-7170 Lamp Gp-Head -High Beam
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
9x-7166 Lamp Gp-Head -High Beam
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 9X***55 | Body As-Lamp | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
115-6488 Lamp Gp-Payload Signal -Rh Platform
| 11***88 | Lamp Group-Payload Signal; -Rh Platform | 1 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 9 |
| 6G***21 | Bracket | 1 |
6v-1119 Lamp Gp-Signal -Parking, Turn
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
| 10***54 | Body As; (Lamp) | 1 |
8t-9683 Lamp Gp-Signal
| 7D***14 | Kit (Lens) (Includes Gasket, Screw & Lens) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
107-2282 Lamp Gp-Signal
| 10***82 | Lamp Group-Signal; -Vims Service Indicator | 1 |
| 10***83 | Lens-Blue; (Vims Service Indicator) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
6v-1108 Lamp Gp-Signal -Stop, Tail, Red
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
| 10***54 | Body As; (Lamp) | 1 |
135-0428 Lamp Gp-Signal
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***28 | Lamp Group-Signal; -Park, Turn | 1 |
| 14***39 | Harness As-Lighting; (Signal Lamp)(Signal Lamp) | 1 |
8t-9684 Lamp Gp-Signal
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***38 | Housing-Receptacle-Sure Seal-Assemble | 1 |
108-1289 Lamp Gp-Signal -Stop, Tail
| 10***89 | Lamp Group-Signal; -Stop, Tail | 1 |
| 10***91 | Body As-Lamp | 1 |
| 2P***68 | Moulding | 1 |
115-6487 Lamp Gp-Signal -Payload-Cab
| 11***87 | Lamp Group-Signal; -Payload-Cab | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 4 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 9 |
141-7106 Lubricator Gp-Air Motor
| 14***06 | Lubricator Group-Air Motor | 1 |
| 18***80 | Kit-Seal; (Air Motor Lubricator) | 0 |
6v-6649 Module Gp-Vids/Vims Interface
| 14***72 | Module Group-Vids/Vims Interface | 1 |
| 6V***49 | Module Group-Vids/Vims Interface | 1 |
144-7172 Module Gp-Vids/Vims Interface
| 14***72 | Module Group-Vids/Vims Interface | 1 |
| 9X***47 | Film-Identification; (Vids/Vims Interface Module) | 1 |
116-4850 Motor Gp-Prelubrication
| 03***96 | Connector; (Flared) | 1 |
| 11***50 | Motor Group-Prelubrication | 1 |
| 16***58 | Bracket As | 1 |
115-6482 Panel Gp-Circuit Breaker -Vims
| 11***82 | Panel Group-Circuit Breaker; -Vims | 1 |
| 11***40 | Harness As; (Vims)(Circuit Breaker) | 1 |
| 11***41 | Film-Instruction; (Fuse) | 1 |
2a-6491 Panel Gp-Circuit Breaker -Ems
| 11***09 | Film-Instruction; (Fuse) | 1 |
| 12***40 | Cover | 1 |
| 17***12 | Circuit Breaker As; (105-Ampere) | 1 |
8w-0652 Sensor Gp-Fuel Level
| 4B***26 | Screw-Machine; (1/4-28x0.625-In) | 4 |
| 5P***29 | Seal-Rectangular | 1 |
| 8W***52 | Sender Group-Float | 1 |
100-3332 Sensor & Mtg Gp-Electric -Engine
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 10***32 | Sensor & Mtg Group-Electric; -Engine | 1 |
| 10***32 | Control Group-Electronic; (Coolant Temp Sensor) | 1 |
115-9168 Sensor & Mounting Gp -Fuel
| 11***94 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 11***68 | Sensor & Mounting Group; -Fuel | 1 |
| 11***41 | Guard | 1 |
105-4273 Sensor & Mounting Gp -Turbocharger Inlet, Rh, Lh
| 10***73 | Sensor & Mounting Group; -Turbocharger Inlet, Rh, Lh | 1 |
| 11***00 | Sensor Group-Pressure; -Turbo Inlet, Atmospheric Air | 2 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 4 |
111-3794 Sensor Gp-Coolant Level
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***94 | Sensor Group-Coolant Level; -Coolant Loss-Aftercooler, Jacket Water | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
165-6634 Sensor Gp-Coolant Level
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***34 | Sensor Group-Coolant Level; (Water, Coolant)(Scac Expansion Tank) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
164-2441 Sensor Gp-Exhaust Temperature -Rh, Lh
| 16***41 | Sensor Group-Exhaust Temperature; -Rh, Lh | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 26***47 | Adapter | 1 |
3e-7826 Sensor Gp-Exhaust Temperature
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 26***47 | Adapter | 1 |
| 26***49 | Sensor Group-Exhaust Temperature | 1 |
124-9325 Sensor Gp-Fuel Level
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
111-2094 Sensor Gp-Fuel Level -Ultrasonic
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***94 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 3E***77 | Wedge-Receptacle Lock; (4-Pin) | 1 |
156-9630 Sensor Gp-Liquid Level
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***30 | Sensor Group-Liquid Level; -Coolant Loss-Aftercooler, Jacket Water | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
239-9957 Sensor Gp-Liquid Level
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 23***57 | Sensor Group-Liquid Level; -Coolant Loss | 1 |
3e-5400 Sensor Gp-Position
| 11***90 | Sensor Group-Position; (Rotary Position Sensor) | 1 |
| 3E***00 | Sensor Group-Position; -Accelerator Control | 1 |
118-8471 Sensor Gp-Position
| 11***71 | Sensor Group-Position; -Transmission Gear | 1 |
| 7B***42 | Bolt, Hex. Hd., 1/4in.-20 N.C. X 1 1/4in. | 2 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
126-7896 Sensor Gp-Position
| 12***96 | Sensor Group-Position; -Transmission Shift Lever | 1 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
| 8T***28 | Seal-Lip Type | 1 |
219-2384 Sensor Gp-Position
| 21***84 | Sensor Group-Position; (Rotary)(Engine Speed) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
6v-5828 Sensor Gp-Position -Transmission Gear
| 6V***28 | Sensor Group-Position; Control Gp-Electronic-Actual Gear Switch | 1 |
| 7B***42 | Bolt, Hex. Hd., 1/4in.-20 N.C. X 1 1/4in. | 2 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
110-8190 Sensor Gp-Position -Accelerator Control
| 11***90 | Sensor Group-Position; (Rotary Position Sensor) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
198-8761 Sensor Gp-Position
| 19***61 | Sensor Group-Position; (Transmission Speed) | 1 |
| 7B***42 | Bolt, Hex. Hd., 1/4in.-20 N.C. X 1 1/4in. | 2 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
161-8906 Sensor Gp-Position
| 16***06 | Sensor Group-Position; -Accelerator Control | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
175-3186 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***86 | Sensor Group-Pressure; -Suspension Cylinder | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
163-8492 Sensor Gp-Pressure -Turbocharger Inlet, Rh, Lh-Atmospheric Air
| 16***92 | Sensor Group-Pressure; -Turbocharger Inlet, Rh, Lh-Atmospheric Air | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
112-9778 Sensor Gp-Pressure
| 11***78 | Sensor Group-Pressure; -Differential Oil | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
111-8802 Sensor Gp-Pressure -Engine Oil
| 11***02 | Sensor Group-Pressure; -Engine Oil | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
6v-1964 Sensor Gp-Pressure -Engine Oil
| 6V***64 | Sensor Group-Pressure; -Engine Oil | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
101-9980 Sensor Gp-Pressure -Payload Monitor
| 10***80 | Sensor Group-Pressure; -Payload Monitor | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
124-0328 Sensor Gp-Pressure -Payload
| 12***28 | Sensor Group-Pressure; -Payload | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
110-5864 Sensor Gp-Pressure -Brake
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 11***64 | Sensor Group-Pressure; -Brake Monitor | 1 |
163-8511 Sensor Gp-Pressure -Brake
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 16***11 | Sensor Group-Pressure; -Brake Monitor | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
100-4311 Sensor Gp-Pressure
| 10***11 | Sensor Group-Pressure | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
6v-1926 Sensor Gp-Pressure -Atmospheric Air
| 6V***26 | Sensor Group-Pressure; -Turbocharger Outlet-Atmospheric Air-Turbocharger Inlet | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
111-8800 Sensor Gp-Pressure -Turbo Inlet, Atmospheric Air
| 11***00 | Sensor Group-Pressure; -Turbo Inlet, Atmospheric Air | 1 |
| 15***89 | Tube; (3cm) | 0 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
141-5746 Sensor Gp-Pressure -Brake Air
| 14***46 | Sensor Group-Pressure; -Air Start Lines | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
143-9694 Sensor Gp-Pressure -Turbocharger Outlet
| 14***94 | Sensor Group-Pressure; -Turbocharger, Outlet | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
3t-0029 Sensor Gp-Speed -Transmission Output
| 14***78 | Sensor Group-Speed | 1 |
| 1B***67 | Ball Bearing | 1 |
| 2A***62 | Screw,Cap,Hexagon H Diode Pig Tail To Grd; (1/4-20x.625 In) | 4 |
3e-0487 Sensor Gp-Speed -Engine Timing
| 3E***87 | Sensor Group-Speed; -Timing-Engine Speed | 1 |
| 8T***42 | Tube-Heat Shrink; (3.2-mm Dia)(800-cm) | 0 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
102-9029 Sensor Gp-Speed -Engine Timing
| 10***29 | Sensor Group-Speed; -Timing-Engine Speed | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 3 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
5t-3235 Sensor Gp-Speed
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 16 |
| 1D***42 | Bolt 5 In. (12.7 cm) Long | 4 |
| 1D***47 | Bolt 9.50 In. (24.13 cm) Long | 4 |
126-1133 Sensor Gp-Speed
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***33 | Sensor Group-Speed; -Variable Speed | 1 |
128-5662 Sensor Gp-Temperature -Differential Oil
| 12***62 | Sensor Group-Temperature; -Differential Oil | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
100-3055 Sensor Gp-Temperature -Torque Converter Oil-Differential Oil-Brake Oil-Transmission Oil-Aftercooler
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
118-3909 Sensor Gp-Temperature -Aftercooler
| 11***09 | Sensor Group-Temperature; -Ambient Air | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
6v-1923 Sensor Gp-Temperature -Coolant
| 6V***23 | Sensor Group-Temperature; -Coolant | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
133-9754 Starting Aid Gp-Ether
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 11***54 | Nozzle As-Ether | 2 |
| 13***59 | Hose As; (355 mm) | 2 |
2a-6495 Starting Aid Gp-Ether
| 2A***95 | Starting Aid Group-Ether | 1 |
| 2A***89 | Plate As | 1 |
| 5P***98 | Clamp-Assemble One Each To Valve As | 1 |
133-9753 Starting Aid Gp-Ether
| 13***53 | Starting Aid Group-Ether | 1 |
| 13***62 | Fitting As | 1 |
| 2A***89 | Plate As | 1 |
119-1692 Starting Aid Gp-Ether
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 1 |
| 11***92 | Starting Aid Group-Ether | 1 |
| 2A***88 | Tube | 1 |
8w-4070 Starting Ar-Cold Weather
| 7C***07 | Heater Group-Jacket Water | 1 |
| 7X***08 | Film-Instruction-Attach To 8w***47 Box As | 1 |
| 8W***65 | Heater Group-Lube Oil | 1 |
4w-6633 Starting Motor Gp-Air -Vane
| 03***17 | Washer-Spring | 2 |
| 11***99 | Housing-Motor | 1 |
| 1L***97 | Ring-Snap; (External) | 1 |
4w-6634 Starting Motor Gp-Air
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 1 |
7c-3372 Starting Motor Gp-Air
| 03***17 | Washer-Spring | 2 |
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 1 |
| 11***99 | Housing-Motor | 1 |
105-8827 Suppressor Gp-Electronic -Arc
| 10***27 | Suppressor Group-Electronic; -Air Conditioner Compressor | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
8c-5681 Switch As-Limit -Transmission Neutralizer
| 8C***78 | Switch As-Limit | 1 |
| 8C***81 | Switch As-Limit; -Transmission Neutralizer | 1 |
| 8C***76 | Head-Switch Actuator | 1 |
164-7577 Switch Gp-Bypass -Transmission Oil Supply-Tc, Front Brake Cooling-Differential Oil Filter-Hoist Screen-Transmission Filter-Transmission Lubrication
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
9x-7781 Switch Gp-Bypass -Transmission Charging-Transmission Oil Supply-Hoist Screen-Tc, Front Brake Cooling-Differential Oil Filter-Transmission Lubrication
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 4B***43 | Nut,Plain,Hexagon Plate Mtg | 2 |
| 4B***63 | Washer; (4.7x11x1.2-mm Thk) | 2 |
171-8710 Switch Gp-Flow -Coolant
| 17***10 | Switch Group-Flow; -Coolant | 1 |
9x-3040 Switch Gp-Flow -Coolant
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
123-2993 Switch Gp-Liquid Level -Engine Oil-Differential Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***93 | Switch Group-Liquid Level; -Engine Oil-Ster, Fan Dr Oil (Engine On)-Torque Converter Oil-Torque Conv Oil (Low, Cold)-Front, Rear Engine Oil-Steering Oil, Engine Off-Torque Conv Oil (Low, Hot)-Auxiliary Coolant-Brake Oil, Hoist-Engine Coolant | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
139-2116 Switch Gp-Toggle
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
| 13***16 | Switch Group-Toggle; (Ground Level Ladder Lamp) | 1 |
| 3E***71 | Wedge; (Receptacle Lock) (3 Pin) | 1 |
7e-8098 Thermocouple Gp
| 5N***26 | Connector; Adapter-.25in Pipe Thread | 1 |
| 6K***79 | Clip; (4.76mm Id) | 1 |
| 7E***30 | Thermocouple | 1 |
2a-6506 Wiring Gp-Cab -Ems
| 01***42 | Screw-Machine; (6/32x1-In) | 2 |
| 10***58 | Flasher As; (24-Volt) | 1 |
| 11***49 | Harness As-Cab; (Aeta) | 1 |
115-6473 Wiring Gp-Cab -Vims
| 10***11 | Sensor Group-Pressure | 1 |
| 10***58 | Film-Instruction; (Console) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
125-5839 Wiring Gp-Cab -Differential Oil Filter/Ems
| 10***66 | Bezel | 1 |
| 12***39 | Wiring Group-Cab; -Differential Oil Filter/Ems | 1 |
| 12***55 | Control Group-Electronic; -Cat Monitoring System | 1 |
2a-7103 Wiring Gp-Cab -Payload/Ems
| 10***53 | Bracket As | 1 |
| 2A***03 | Wiring Group-Cab; -Payload/Ems | 1 |
| 2A***32 | Harness As; (Payload, Cab) | 1 |
125-4233 Wiring Gp-Cab -Differential Oil Filter/Vims-Vims
| 10***66 | Bezel | 1 |
| 12***33 | Wiring Group-Cab; -Differential Oil Filter/Vims-Vims | 1 |
| 12***55 | Control Group-Electronic; -Cat Monitoring System | 1 |
131-7117 Wiring Gp-Cab -Rear Axle Oil Cooler
| 12***50 | Plate As | 1 |
| 12***95 | Harness As; (Ident Code)(Rax Oil Clr/Vims) | 1 |
| 13***88 | Harness As; (Ident Code)(Rax Oil Clr/Ems) | 1 |
255-8769 Wiring Gp-Cab
| 10***58 | Flasher As; (24-Volt) | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 18 |
| 11***82 | Panel Group-Circuit Breaker; -Vims | 1 |
115-6476 Wiring Gp-Chassis -Chassis
| 03***48 | Clip; (11.11mm .437in Id) | 7 |
| 03***97 | Boot | 1 |
| 09***04 | Terminal-Ring; (2-Ga, 3/8-In Screw) | 2 |
2a-6513 Wiring Gp-Chassis -Chassis (Ems)
| 03***48 | Clip; (11.11mm .437in Id) | 7 |
| 03***97 | Boot | 2 |
| 09***04 | Terminal-Ring; (2-Ga, 3/8-In Screw) | 2 |
121-4128 Wiring Gp-Engine -Harness & Sensor
| 09***52 | Bar | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 18 |
111-4371 Wiring Gp-Engine -Vims
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 3 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
132-2168 Wiring Gp-Engine -Shutter
| 13***68 | Wiring Group-Engine; -Shutter | 1 |
| 13***29 | Harness As; (Fan Clutch) | 1 |
| 13***57 | Cover | 1 |
300-3966 Wiring Gp-Lighting
| 03***97 | Boot | 2 |
| 09***04 | Terminal-Ring; (2-Ga, 3/8-In Screw) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
117-1354 Wiring Gp-Prelubrication -Engine Prelube-Cab
| 11***54 | Wiring Group-Prelubrication; -Engine Prelube-Cab | 1 |
| 11***55 | Harness As; (Engine Prelube) | 1 |
| 3T***48 | Clip Assembly - Housing Plug To Housing Recp. | 1 |
8w-6168 Wiring Gp-Sensor -Payload
| 11***39 | Spacer; (10.5x18x21-mm Thk) | 2 |
| 1F***50 | Nut Rops Support | 8 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
Engine Arrangement
121-5785 Engine Ar
| 10***14 | Fumes Disposal Group | 1 |
| 10***31 | Cover Group-Valve Mechanism | 10 |
| 10***38 | Breather Group; -Crankcase | 1 |
7e-9079 Engine Ar
| 10***32 | Sensor & Mtg Group-Electric; -Engine | 1 |
| 10***14 | Fumes Disposal Group | 1 |
| 10***71 | Drive Ar-Fan; -Non-Variable Speed | 1 |
Frame And Body
8x-1187 Body & Canopy As -Taconite
| 2B***18 | Bolt 7.5 In. (1.91 Dm) Long | 16 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 16 |
| 5T***88 | Body As-Center | 1 |
8x-1185 Body & Canopy As -Heavy Duty
| 2B***18 | Bolt 7.5 In. (1.91 Dm) Long | 16 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 16 |
| 5T***45 | Body As-Lh | 1 |
8x-1183 Body & Canopy As
| 2B***18 | Bolt 7.5 In. (1.91 Dm) Long | 16 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 16 |
| 8W***66 | Guard As-Rh | 1 |
113-8010 Body & Canopy As
| 11***10 | Body & Canopy As | 1 |
5t-6046 Cable Gp-Retaining -Truck Body
| 10***14 | Coupler | 1 |
| 1D***43 | Bolt (5-1/2 In. Long 1 In. Dia.); Platform To Support Assembly | 2 |
| 2B***74 | Pin-Clevis | 1 |
5t-8129 Walkway Gp
2a-6507 Cowling Gp
| 11***66 | Cowling As | 1 |
| 2A***07 | Cowling Group | 1 |
| 2A***92 | Cover As | 1 |
8w-2874 Extension & Brace Gp -Front Guard-Canopy
| 8W***11 | Guard As-Front | 1 |
| 8W***39 | Brace As-Canopy | 5 |
| 8W***74 | Extension & Brace Group; -Front Guard-Canopy | 1 |
8x-1193 Extension As
| 8X***93 | Extension As | 1 |
8x-1192 Extension As -Heavy Duty
| 8X***92 | Extension As; -Heavy Duty | 1 |
114-4583 Extension As-Tail
| 11***83 | Extension As-Tail | 1 |
8w-4439 Fender Gp
| 1D***17 | Nut-Plate And Angle Assembly To Hydraulic And Fuel Tanks; Nut Plate And Angle Assembly To Hydraulic And Fuel Tanks | 17 |
| 2G***58 | Strip | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 18 |
234-6007 Frame Gp
| 21***91 | Plate | 1 |
| 23***07 | Frame Group | 1 |
| 23***08 | Plate | 1 |
2a-6508 Frame Gp
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 12 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 11***73 | Support As | 1 |
5t-3230 Guard Gp-Drive Shaft
| 21***50 | Guard As | 1 |
| 2A***38 | Guard As | 1 |
| 2A***41 | Guard As | 1 |
5t-6747 Guard Gp-Platform
| 5M***62 | Bolt; (3/8-16x0.75-In) | 4 |
| 5T***42 | Brace | 1 |
| 5T***43 | Plate | 1 |
156-3481 Guard Gp-Power Train Filter
| 14***59 | Plate | 1 |
| 14***73 | Guard As; (Rear Axle Lube Filter) | 1 |
| 15***84 | Guard As; (Lwr Pin Lube Line-Rt Side Susp) | 1 |
311-3251 Handrail Gp
| 1F***50 | Nut Rops Support | 16 |
| 28***31 | Handrail As | 1 |
| 29***33 | Handrail As | 1 |
5t-3214 Hood Gp-Truck
| 0T***83 | Washer--Junction Box To Rear Support | 1 |
| 1A***99 | Dowel | 1 |
| 1D***64 | Grab Iron) | 1 |
294-3679 Ladder & Walkway Gp
| 00***92 | Screw-Washer Head; (1/4-20x0.5-In) | 4 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***20 | Bolt--Customer Grounding Bolt | 13 |
2a-6509 Ladder Gp
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 1 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 1 |
5t-6889 Liner Gp-Body
| 5T***04 | Plate | 2 |
| 5T***05 | Plate | 1 |
| 5T***30 | Plate | 2 |
156-9364 Liner Gp-Body
| 15***64 | Liner Group-Body | 1 |
| 16***01 | Plate | 3 |
| 16***02 | Plate | 6 |
5t-6020 Liner Gp-Body
| 5T***04 | Plate | 2 |
| 5T***05 | Plate | 1 |
| 5T***06 | Plate; (Side) | 2 |
114-6362 Liner Gp-Body
| 11***62 | Liner Group-Body-Heavy Weight | 1 |
114-8657 Liner Gp-Extension -Tail
8x-1194 Liner Gp-Extension -Tail
8x-8260 Lubrication Gp-Automatic
5t-3205 Mirror Gp-Rear View -Lh-Cab
8w-1923 Mirror Gp-Rear View -Rh-Chassis
8x-1191 Mounting Gp-Truck Body
8w-4594 Pump Gp-Lubrication -Automatic Lubrication
5t-7800 Pump Gp-Lubrication
7i-4795 Sideboard As-Body
294-3681 Step Gp
4t-9232 Suspension Gp-Front
5t-0883 Suspension & Mtg Gp-Front
1u-4605 Suspension Gp-Front
9t-9073 Suspension Gp-Front
107-2860 Suspension Gp-Rear
5t-0884 Suspension Gp-Rear
1u-4651 Suspension Gp-Rear
2a-6512 Tread Gp-Non-Skid
141-2107 Valve Gp-Lube Distribution -2-Injector
5t-5009 Valve Gp-Lube Distribution -3-Injector
5t-5010 Valve Gp-Lube Distribution -5 Injector
8w-2597 Valve Gp-Lube Distribution -4-Injector
Fuel System
2a-6773 Drive Gp-Tachometer -Chassis
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 2A***73 | Drive Group-Tachometer; -Chassis | 1 |
7w-5397 Drive Gp-Tachometer
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 8 |
6i-4470 Filter Gp-Fuel
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 5 |
| 1R***55 | Filter As-Fuel; (Advanced Efficiency) | 2 |
143-2248 Filter Gp-Fuel -Fuel, Water Separator
| 03***65 | Elbow (45 Degrees) | 1 |
| 03***96 | Connector; (Flared) | 1 |
| 06***74 | Elbow | 4 |
2w-6071 Filter Gp-Primary Fuel
| 1L***69 | Ring-Retaining | 1 |
| 2H***29 | Ring - Retaining External | 1 |
| 2J***57 | Packing,Preformed Screw Assembly Part Of Kit P/N 5r***25 | 1 |
155-7330 Filter Gp-Water Sep & Fuel
| 11***16 | Filter Element-Fuel; (Fuel, Water Separator) | 1 |
| 15***30 | Filter Group-Water Sep & Fuel | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
7e-8836 Injector Gp-Fuel
| 7E***36 | Injector Group-Fuel | 1 |
| 8J***25 | Seal-O-Ring | 1 |
| 9X***35 | Seal-O-Ring | 1 |
5t-3217 Lines Gp-Fuel
| 00***01 | Elbow (To Serial No 1md225) | 2 |
| 03***50 | Elbow (Check Valve Drain Tube) | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
7e-9214 Lines Gp-Fuel Injection
| 00***81 | Tee-Union; (Flared 37-Deg) | 1 |
| 03***49 | Elbow; (90 Degree, 37 Degree Flared) | 3 |
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
7e-9090 Pump Gp-Fuel Injection
| 7C***15 | Plug | 1 |
| 7E***80 | Clamp-Injector | 1 |
| 7E***36 | Injector Group-Fuel | 1 |
8n-7763 Pump Gp-Fuel Priming
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 1 |
| 1H***71 | Seal 20.22 mm(.796 In.)I. D. | 1 |
| 2W***05 | Pump As-Fuel Priming | 1 |
1n-4478 Pump Gp-Fuel Transfer
| 11***96 | Seal-Lip; (Outer) | 1 |
| 11***97 | Seal-Lip; (Inner) | 1 |
| 12***37 | Shaft As-Drive | 1 |
8n-6151 Pump Gp-Fuel Transfer
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
| 1N***78 | Pump Group-Fuel Transfer; (1-Section Gear) | 1 |
| 1N***36 | Coupling-Drive | 1 |
115-9185 Tank Gp-Fuel
| 03***27 | Hose As | 1 |
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 6 |
| 0S***27 | Bolt -114.30 mm(4.50 In.) Long | 2 |
6g-7370 Tank Gp-Fuel
| 03***27 | Hose As | 1 |
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 6 |
| 0S***27 | Bolt -114.30 mm(4.50 In.) Long | 2 |
115-9186 Tank Gp-Fuel
| 11***86 | Tank Group-Fuel | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
| 3B***51 | Plug (Use Without Low Temperature Sensor) | 1 |
2g-9000 Valve As-Tank -Fast Fill Fuel
| 2G***00 | Valve As-Tank | 1 |
Hydraulic System
3g-6849 Valve Gp-Relief -Hoist
| 2J***66 | Shim .1270 mm(.005 In.) Thick | 7 |
| 2J***57 | Body-Valve | 1 |
| 2J***89 | Springs | 1 |
9t-5210 Valve Gp-Relief -Rear Brake Oil Cooler
| 6J***80 | Spring | 1 |
| 6K***07 | Seal-O-Ring; (43.69mm Id) | 1 |
| 8B***24 | Shim .81mm(.032in)Thk; .82mm(.032in.)Thk. | 9 |
6e-1155 Valve Gp-Relief -Hoist
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4J***22 | Seal-Interface Between 3rd & Tilt Valve | 1 |
| 4J***22 | Washer,Pump,Hydraul Cover Part Of Kit P/N 4j***80 | 1 |
6g-9560 Cylinder & Mtg Gp-Hoist
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 1D***15 | Bolt 139.70 mm(5.50 In.) Long | 6 |
| 23***05 | Pin As | 2 |
4t-5931 Cylinder Gp-Hoist
| 0T***72 | Bolt; 7/16" Diameter X 1 1/2" Length Generator To Engine | 8 |
| 1D***48 | Bolt (4 1/4" Long) | 16 |
| 1D***28 | Bolt 8.26 cm(3.25 In.) Long | 8 |
2a-6516 Drive Gp-Pump -Steering-Hoist, Rear Brake Cooling-Transmission
| 2A***16 | Drive Group-Pump; -Auxiliary Hoist-Steering, Transmission-Rear Brake Cooling | 1 |
| 2A***46 | Drive Group-Pump; -Auxiliary Hoist-Steering, Transmission-Rear Brake Cooling | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 4 |
2a-6546 Drive Gp-Pump -Steering-Hoist, Rear Brake Cooling-Transmission
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 16 |
| 13***97 | Seal-Lip Type | 1 |
| 1H***74 | Dowel (.5" Long) | 2 |
8w-4444 Lines Gp-Hoist
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 03***38 | Bolt 69.85 mm(2.75 In.) Long | 4 |
| 11***87 | Hose As | 2 |
105-4310 Lines Gp-Hydraulic Fan -Variable Speed
| 03***33 | Seal-O-Ring; (12.42mm Id) | 4 |
| 06***38 | Seal-O-Ring; (7.65 mm Id) | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
8w-4446 Lines Gp-Hydraulic Oil Cooler -Tc, Front, Rear Brake
| 00***52 | Seal-O-Ring | 4 |
| 10***31 | Lug; (3/8-16x1-In) | 3 |
| 10***58 | Elbow | 2 |
6e-2308 Manifold Gp-Hydraulic -Hoist
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4J***33 | Seal Fuel Injection Pump | 1 |
| 6E***29 | Manifold | 1 |
5t-0882 Mounting Gp-Hydraulic Tank -Tc, Hoist, Brake, Xmsn
| 10***00 | Deflector | 2 |
| 10***01 | Deflector | 1 |
| 10***04 | Support As | 1 |
5t-4463 Mounting Gp-Hydraulic Tank -Tc, Hoist, Brake, Xmsn
| 10***00 | Deflector | 2 |
| 10***01 | Deflector | 1 |
| 10***04 | Support As | 1 |
4t-2606 Pump Gp-Gear -Hoist, Rear Brake Cooling
| 08***93 | Ring-Retaining | 1 |
| 3E***24 | Stud | 8 |
| 3G***09 | Coupling | 1 |
5t-3229 Pump Gp-Gear -Hoist, Rear Brake Cooling
| 3D***90 | Stud-Taperlock; (1/2x13x1.97 In Oal) | 4 |
| 4T***06 | Pump Group-Gear; -Hoist, Rear Brake Cooling | 1 |
| 5F***99 | Packing,Preformed Cover Mtg; Part Of Kit P/N 5r***25 Part Of Kit P/N 8s***57 | 1 |
4t-0382 Pump Gp-Piston -Steering
| 0T***19 | Bolt Hose Assembly At | 2 |
| 10***58 | Pin-Guide | 1 |
| 1J***74 | Ring-Retaining | 2 |
6e-1349 Screen Gp-Hydraulic -Tc, Front Brake Cooling
| 2J***56 | Ring-Retaining | 1 |
| 2S***39 | Seal-O-Ring | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
125-5811 Screen Gp-Oil Cooler
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 8 |
| 10***58 | Elbow | 2 |
| 12***11 | Screen Group-Oil Cooler; -Brake | 1 |
8w-4451 Shaft Gp-Pump Drive
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 8 |
| 2K***71 | Locknut; (1-14-Thd) | 1 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 8 |
4t-4147 Tank Gp-Hydraulic & Xmsn -Tc, Hoist, Brake, Xmsn
| 00***28 | Angle | 2 |
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 130 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
8w-4452 Universal Joint Gp-Pump Drive
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 8 |
| 10***87 | Spider And Bearing | 2 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 8 |
4t-7345 Valve Gp-Control -Hoist
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0T***20 | Bolt (1.25 In. Long X .438 In. Dia.) | 2 |
| 2J***36 | Disk,Valve Uoc:Bsv,Bsx | 1 |
9t-9898 Valve Gp-Counterbalance -Hoist
| 6E***58 | Valve Group-Counterbalance; (Hoist) | 1 |
| 6E***83 | Kit-Seal; (Counterbalance Valve)(Hoist) | 1 |
| 6E***84 | Block | 1 |
6e-2235 Valve Gp-Diverter -Hoist
| 1U***22 | Bearing-Sleeve; (12.65mm Id) | 1 |
| 1U***23 | Plug Assem. | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 4 |
9t-7095 Valve Gp-Pump Control -Steering
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 1 |
| 2S***63 | Seal 49.21 mm(1.9375 In.)I.D. | 1 |
| 3G***26 | Shim; 1.524mm(.06in.)Thk | 1 |
Lubrication System
101-0838 Breather Gp -Crankcase
| 03***31 | Seal-O-Ring | 2 |
| 10***38 | Breather Group; -Crankcase | 1 |
| 10***99 | Cover As | 2 |
7e-9082 Breather Gp -Crankcase
| 03***31 | Seal-O-Ring | 2 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 8 |
| 2W***72 | Seal-O-Ring; (221.62mm Id) | 2 |
2w-0201 Filler Gp-Engine Oil
| 03***37 | Bolt-Shoulder; (1/4-20x1-In) | 1 |
| 10***72 | Hasp | 1 |
| 13***46 | Cap As-Engine Oil Filler | 1 |
1n-4764 Filler Gp-Engine Oil
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 3 |
| 11***57 | Bracket | 1 |
2w-0206 Filter Gp-Engine Oil
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 18 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 10 |
100-6014 Fumes Disposal Gp
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
| 10***14 | Fumes Disposal Group | 1 |
2w-0203 Gauge Gp-Oil Level (Dipstick)
| 11***44 | Gauge As-Oil Level | 1 |
| 2W***03 | Gauge Group-Oil Level (Dipstick) | 1 |
| 2W***77 | Tube As-Oil Level; (Gauge Guide) | 1 |
2w-0207 Lines Gp-Engine Oil
| 06***56 | Seal-O-Ring | 4 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 6 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
123-6919 Lines Gp-Fan Drive -Variable Speed
| 03***33 | Seal-O-Ring; (12.42mm Id) | 2 |
| 06***38 | Seal-O-Ring; (7.65 mm Id) | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
117-0445 Lines Gp-Prelubrication
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 09***04 | Terminal-Ring; (2-Ga, 3/8-In Screw) | 2 |
7e-5541 Lines Gp-Turbocharger Oil
| 03***36 | Tee-Flared | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
109-8081 Lines Gp-Turbocharger Oil
| 03***36 | Tee-Flared | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
135-8770 Manifold Gp-Control -Fan Drive-Variable Speed
| 13***70 | Manifold Group-Control; -Fan Drive-Variable Speed | 1 |
| 13***71 | Valve Group-Solenoid | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 3 |
8x-8365 Oil Change Gp-High Speed
| 00***43 | Elbow | 1 |
| 03***65 | Elbow (45 Degrees) | 1 |
| 03***34 | Elbow-Flared | 1 |
116-7153 Pump & Motor Gp-Prelubrication
| 11***53 | Pump & Motor Group-Prelubrication | 1 |
| 15***58 | Connector | 1 |
| 15***59 | Connector | 1 |
8n-6152 Pump Gp-Engine Oil -2-Section Gear
| 29***87 | Seal-O-Ring | 1 |
| 4P***38 | Pump Group-Engine Oil; -2-Section Gear | 1 |
| 4S***82 | Bolt 7.25 In. (18.42 cm) Long | 3 |
4p-5638 Pump Gp-Engine Oil -2-Section Gear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 9 |
| 11***49 | Gasket | 1 |
8n-7805 Pump Gp-Scavenge -Front Sump
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
1w-8508 Pump Gp-Scavenge -Front Sump
| 05***79 | Washer; (13.5x44.45x10-mm Thk) | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
144-8267 Pump Gp-Scavenge -Front Sump
| 05***79 | Washer; (13.5x44.45x10-mm Thk) | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
124-2725 Valve & Mtg Gp-Fan Drive -Variable Speed
| 12***25 | Valve & Mtg Group-Fan Drive; -Variable Speed | 1 |
| 12***97 | Valve Group-Solenoid | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 3 |
124-3497 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
| 11***03 | Kit-Seal; (Modulating Valve) | 1 |
135-8771 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***03 | Kit-Seal; (Modulating Valve) | 1 |
| 12***74 | Spacer-Special; (16.5x34.42x11.5-mm Thk) | 1 |
Machine Arrangement
125-9283 Chassis Ar -European Market
| 12***41 | Tank-Air | 1 |
| 12***83 | Chassis Ar; -European Market | 1 |
125-6238 Machine Ar -European Market
| 12***38 | Machine Ar; -European Market | 1 |
| 12***83 | Chassis Ar; -European Market | 1 |
Operator Station
249-2969 Adjuster Gp-Seat
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
173-1028 Adjuster Gp-Seat
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
173-1029 Adjuster Gp-Seat
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
2a-6502 Air Conditioner & Mounting Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 10***46 | Air Conditioner Group | 1 |
| 1B***04 | Nut-Full | 1 |
108-4546 Air Conditioner Gp
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 1 |
| 10***46 | Air Conditioner Group | 1 |
| 11***35 | Case As | 1 |
3e-7711 Air Conditioner Gp
| 1M***30 | Nut And Lock Assem.; (No. 10-32) | 4 |
| 2G***15 | Bracket | 2 |
| 2L***17 | Screw-Machine; (10-32x7.9-mm) | 2 |
151-2702 Armrest Gp -Rh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 15***00 | Bracket As | 1 |
169-5423 Armrest Gp -Rh
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 15***51 | Bracket | 1 |
8y-5904 Armrest Gp
| 3E***12 | Nut-Square; (3/8-16-Thd) | 1 |
| 6V***87 | Screw-Pan Head; (10-24x1-In) | 4 |
| 8S***03 | Ring-Retaining | 1 |
114-9461 Cab Ar
| 11***55 | Cab Group; -Vims | 1 |
| 11***61 | Cab Ar | 1 |
| 11***64 | Panel Group-Instrument; -Keypad, Speedometer, Tach | 1 |
2a-6505 Cab Ar -Ems
| 11***77 | Hose Group-Air; -Gauge-Brake Pressure | 1 |
| 11***93 | Harness As-Wiring; (Auto Retarder Control)(1 Pin) | 1 |
| 12***39 | Wiring Group-Cab; -Differential Oil Filter/Ems | 1 |
260-1831 Cab Ar
| 11***64 | Panel Group-Instrument; -Keypad, Speedometer, Tach | 1 |
| 11***87 | Lamp Group-Signal; -Payload-Cab | 1 |
| 11***03 | Control Group-Vids/Vims Main | 1 |
2a-6501 Cab Gp -Ems
| 10***14 | Cab As | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 3 |
| 1V***45 | Grommet | 2 |
2a-6498 Cab Gp -Ems
| 10***01 | Cover; (Lh) | 2 |
| 11***93 | Dash As | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 80 |
255-8766 Cab Gp
| 11***58 | Washer; (6.5x17x1-mm Thk) | 73 |
| 12***04 | Plate | 1 |
| 14***69 | Washer; (7.5x40x3-mm Thk) | 5 |
114-9458 Cab Gp -Vims
| 09***37 | Spacer; (12-mm Thk) | 7 |
| 11***58 | Cab Group; -Vims | 1 |
| 11***59 | Cab As | 1 |
256-2442 Cab Gp
| 1H***44 | Lockwasher (Bracket To Cab) | 3 |
| 1V***45 | Grommet | 2 |
| 1V***46 | Ring-Snap | 2 |
255-8767 Cab Gp
| 25***67 | Cab Group | 1 |
| 26***83 | Panel As-Cab | 1 |
| 26***84 | Panel As-Cab; (Lh) | 1 |
114-9455 Cab Gp -Vims
| 10***01 | Cover; (Lh) | 2 |
| 10***38 | Dash As | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 80 |
143-2514 Cleanout Gp-Cab
| 14***14 | Cleanout Group-Cab | 1 |
| 15***27 | Gun-Air Jet | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
7n-4297 Compressor Gp-Refrigerant
| 01***11 | Screw; (10-16x0.25-In) | 3 |
| 14***97 | Valve As-Relief; (Refrigerant Compressor) | 1 |
| 1H***71 | Seal 20.22 mm(.796 In.)I. D. | 2 |
2w-0216 Compressor Gp-Refrigerant
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
3e-3768 Compressor Gp-Refrigerant
| 01***11 | Screw; (10-16x0.25-In) | 3 |
| 14***97 | Valve As-Relief; (Refrigerant Compressor) | 1 |
| 1P***56 | Plate | 1 |
4w-4033 Condenser & Mtg Gp-Refrigerant
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 4 |
| 4W***33 | Condenser & Mounting Group | 1 |
| 4W***85 | Plate | 2 |
255-8770 Console Gp-Operator
| 11***58 | Washer; (6.5x17x1-mm Thk) | 15 |
| 12***65 | Knob; (Black Plastic) | 1 |
| 12***96 | Sensor Group-Position; -Transmission Shift Lever | 1 |
5t-6377 Control Gp-Hoist -Chassis
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 6 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 2 |
| 1A***52 | Clevis,Rod End Governor And Decelerator Control | 2 |
257-6990 Control Gp-Hoist
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 1B***06 | Key-Woodruff | 2 |
| 1F***31 | Collar | 1 |
5t-6716 Control Gp-Hoist -Cab
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 10***72 | Lever; (Bed Control) | 1 |
| 1B***06 | Key-Woodruff | 2 |
158-8717 Control Gp-Monitor -Cat Monitoring System
| 15***17 | Control Group-Monitor; -Cat Monitoring System | 1 |
9x-6846 Control Gp-Monitor -Payload
| 10***85 | Battery; (Lithium)(Internal Backup) | 1 |
| 18***78 | Control Group-Payload Electronic | 1 |
| 8C***78 | Seal-O-Ring | 1 |
9x-6847 Display Gp-Payload Monitor
| 8C***81 | Film-Instruction; (Payload Measurement) | 1 |
| 9X***08 | Control Group-Payload Electronic; -Operator Display | 1 |
| 9X***47 | Control Group-Payload Electronic; -Operator Display | 1 |
9x-5308 Display Gp-Payload Monitor -Operator Display
| 5P***66 | Terminal-Ring; (18-Ga To 22-Ga, No. 6 Screw) | 6 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 4 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 4 |
127-4765 Control Gp-Retarder -Automatic
| 12***61 | Valve & Mtg Group-Brake; -Automatic Retarder | 1 |
| 12***65 | Control Group-Retarder; -Automatic | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
2a-6518 Control Gp-Retarder -Automatic
| 2A***18 | Control Group-Retarder; -Automatic | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
| 3E***78 | Valve & Mounting Group; -Automatic Retarder-Retarder Control | 1 |
2a-6517 Control Gp-Retarder -Automatic
| 12***16 | Harness As-Cab; (Arc-Cab) | 1 |
| 2A***17 | Control Group-Retarder; -Automatic-Electrical | 1 |
| 2A***21 | Plate | 1 |
135-6568 Control Gp-Retarder -Automatic
| 00***33 | Tee-Pipe | 1 |
| 12***61 | Valve & Mtg Group-Brake; -Automatic Retarder | 1 |
| 13***68 | Control Group-Retarder; -Automatic-Hydraulic | 1 |
5t-6545 Control Gp-Transmission
| 12***96 | Sensor Group-Position; -Transmission Shift Lever | 1 |
| 3L***40 | Bolt-Hex Socket Head; (10-24x.750in) | 2 |
| 4J***33 | Seal Fuel Injection Pump | 4 |
165-8682 Control Gp-Unprgmed Monitor -Vids/Vims Main Module
| 10***85 | Battery; (Lithium)(Internal Backup) | 1 |
| 13***20 | Film-Identification; (Vids, Vims Main Module) | 1 |
| 16***82 | Control Group-Unprgmed Monitor; -Vids/Vims Main Module | 1 |
226-8720 Cover Gp-Seat Belt
| 22***85 | Cover-Front | 1 |
| 22***86 | Cover As; (Rear) | 1 |
| 22***20 | Cover Group-Seat Belt | 1 |
251-6755 Door Gp-Cab
| 11***58 | Washer; (6.5x17x1-mm Thk) | 9 |
| 12***65 | Knob; (Black Plastic) | 1 |
| 12***73 | Handle As-Pull | 1 |
251-2466 Door Gp-Cab
| 03***29 | Bolt; (1/4-20x0.347-In) | 11 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 10***88 | Glass As-Window | 1 |
8x-8090 Door Gp-Cab -Lh-Cab
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 4 |
| 10***87 | Escutcheon | 1 |
8w-4170 Door Gp-Cab -Rh
| 12***65 | Handle As; (Rh Door)(Outside) | 1 |
| 17***94 | Seal; (418-cm) | 0 |
| 2G***29 | Hinge | 1 |
5t-6163 Door Gp-Cab -Lh
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 6 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 4 |
2a-6774 Drive Gp-Tachograph -Chassis
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 2A***74 | Drive Group-Tachograph; -Chassis | 1 |
8y-5874 Extension Gp-Backrest -Cloth
| 8Y***74 | Extension Group-Backrest; Backrest Extension Group | 1 |
| 8Y***77 | Pan As-Extension | 1 |
| 8Y***43 | Cushion Kit; (Consists Of Fastener, Cushion Assem.) | 1 |
4w-0483 Gauge Gp-Coolant Temperature
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
| 4W***83 | Gauge Group-Coolant Temperature; (Eng. Coolant)(24 V) | 1 |
155-6003 Gauge Gp-Coolant Temperature -Translucent Face
| 15***03 | Gauge Group-Coolant Temperature; -Translucent Face | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
4w-2067 Gauge Gp-Oil Temperature
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
| 4W***67 | Gauge Group-Oil Temperature | 1 |
155-6002 Gauge Gp-Oil Temperature -24 Volt
| 15***02 | Gauge Group-Oil Temperature; -24 Volt | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
8w-7396 Horn Gp-Air -Chassis
| 2H***23 | Grommet (1.375" Inside Diameter) | 1 |
| 2H***24 | Grommet (.875" Inside Diameter) | 1 |
| 4M***80 | Nut-Plated Full | 1 |
5t-0857 Horn Gp-Air -Cab
| 3D***87 | Fitting; - Use When Relocating Air Override Valve To R.H. Side Panel If Equipped With Attachment Parking Brake Control | 1 |
| 3D***43 | Valve As-Horn | 1 |
| 4B***56 | Screw-Machine; (1/4-20x0.75-In) | 2 |
5d-6998 Horn Gp-Air -Chassis
| 15***87 | Cover | 2 |
| 2G***64 | Kit-Diaphragm; (Air Horn) | 2 |
| 4B***75 | Washer (1.75 In. Outside Diameter) | 1 |
8y-6862 Housing Gp-Seat Suspension
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
| 8Y***45 | Kit-Suspension Knob; (Height Adjustment)(Suspension Seat) | 1 |
175-7468 Housing Gp-Seat Suspension
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
108-4588 Housing Gp-Seat Suspension
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
106-1773 Kit-Conversion-Seat
| 10***73 | Kit-Conversion-Seat | 1 |
2a-6514 Lines Gp-Air Conditioner
| 10***89 | Accumulator-Air Conditioner, . Gear; Ring | 1 |
| 10***39 | Bracket | 1 |
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 1 |
5t-3218 Lines Gp-Heater
| 00***89 | Valve As-Drain | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 2 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 10 |
8x-2803 Lines Gp-Window Washer -Window
| 14***95 | Hose; (650-cm Each) | 0 |
| 1P***78 | Clamp; (Hose) | 1 |
| 2V***16 | Clip; (9.52mm Id) | 4 |
149-2357 Module Gp-Message Center -Vids-Vids, Vims
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***57 | Module Group-Message Center; -Vids-Vids, Vims | 1 |
6v-6643 Module Gp-Message Center -Vims
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
| 6V***43 | Module Group-Message Center; -Vims | 1 |
133-1840 Module Gp-Message Center -Vims
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***40 | Module Group-Message Center; -Vims | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
115-6495 Monitor Ar
| 11***95 | Monitor Ar | 1 |
| 2A***05 | Cab Ar; -Ems | 1 |
| 2A***13 | Wiring Group-Chassis; -Chassis (Ems) | 1 |
8x-2824 Motor Gp-Window Wiper -Air
| 2L***67 | Locknut; (3/8-24-Thd) | 1 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 1 |
| 8X***52 | Kit-Wiper Repair; (Window) | 1 |
2a-6683 Mounting Gp-Cab
| 1F***64 | Bolt; (1-14x4-In) | 22 |
| 1K***18 | Bolt | 6 |
| 1K***20 | Bolt; (1-1/4-7x9.5-In) | 6 |
143-2251 Odometer Gp
| 12***31 | Plate As | 1 |
| 14***16 | Odometer As | 1 |
| 14***51 | Odometer Group | 1 |
143-2254 Odometer Gp
| 12***31 | Plate As | 1 |
| 14***17 | Odometer As | 1 |
| 14***54 | Odometer Group | 1 |
178-0605 Pan Gp-Backrest -Lumbar
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***05 | Pan Group-Backrest; -Lumbar | 1 |
186-3059 Pan Gp-Backrest -Cloth
| 11***04 | Cushion As-Back | 1 |
| 13***43 | Plate As-Lumbar | 1 |
| 16***83 | Knob-Lumbar | 1 |
8y-5909 Pan Gp-Backrest -Back
| 2F***06 | Screw-Machine (6-32x. 25in); (6-32x0.25-In) | 1 |
| 3E***35 | Clip | 1 |
| 3E***36 | Stud-Ball | 1 |
292-6402 Pan Gp-Backrest -Lumbar
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***07 | Holder | 1 |
251-7684 Pan Gp-Backrest -Cloth
| 16***83 | Knob-Lumbar | 1 |
| 17***05 | Pan Group-Backrest; -Lumbar | 1 |
| 21***48 | Cushion As | 1 |
218-0864 Pan Gp-Backrest -Cloth
| 13***43 | Plate As-Lumbar | 1 |
| 16***83 | Knob-Lumbar | 1 |
| 17***52 | Retainer | 1 |
226-7674 Pan Gp-Backrest
| 13***43 | Plate As-Lumbar | 1 |
| 16***83 | Knob-Lumbar | 1 |
| 17***52 | Retainer | 1 |
292-9240 Pan Gp-Backrest -Cloth
| 16***83 | Knob-Lumbar | 1 |
| 25***28 | Plug | 3 |
| 29***00 | Cushion As | 1 |
108-8421 Pan Gp-Backrest -Lumbar
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
| 10***23 | Shaft As-Lumbar | 1 |
| 10***24 | Pan-Lumbar | 1 |
8y-5992 Pan Gp-Seat
| 3K***97 | Pin 3.18 mm(.125 In.) Diameter | 4 |
| 6V***56 | Ring-Retaining | 2 |
| 8Y***92 | Pan As-Seat; (Bottom) | 1 |
110-2238 Panel Gp-Instrument -Ems
| 09***37 | Spacer; (12-mm Thk) | 2 |
| 11***38 | Panel Group-Instrument; -Speedometer, Tach | 1 |
| 11***08 | Film-Dash; (Instrument Panel) | 1 |
114-9462 Panel Gp-Instrument -Keypad
| 10***66 | Bezel | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
2a-6503 Panel Gp-Instrument -Ems
| 11***38 | Panel Group-Instrument; -Speedometer, Tach | 1 |
| 2A***03 | Panel Group-Instrument; -Speedometer, Tach | 1 |
| 2G***51 | Socket As (Each Includes:) | 9 |
114-9463 Panel Gp-Instrument -Speed/Tachometer
| 10***67 | Bezel | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***76 | Film-Dash; (Instrument Panel) | 1 |
114-9464 Panel Gp-Instrument -Vims
| 10***77 | Film-Instruction; (Arc) | 1 |
| 11***62 | Panel Group-Instrument; -Keypad | 1 |
| 11***63 | Panel Group-Instrument; -Speed/Tachometer | 1 |
2a-6463 Panel Gp-Instrument -Ems
| 09***37 | Spacer; (12-mm Thk) | 2 |
| 1P***10 | Tape (Order By The Meter) (Use As | 0 |
| 2A***17 | Plate As | 1 |
8x-7946 Pedal Gp-Governor
| 1M***37 | Spring | 1 |
| 2K***67 | Pin-Spring | 1 |
| 2N***56 | Screw-Machine; (10-24x1.5-In) | 2 |
257-6993 Pedal Gp-Governor
| 13***50 | Plate As | 1 |
| 1M***37 | Spring | 1 |
| 21***84 | Sensor Group-Position; (Rotary)(Engine Speed) | 1 |
4p-3663 Platform Gp -Engine
| 4P***63 | Platform Group; -Engine | 1 |
| 5S***79 | Hex Head Capscrew, 3/8 Nc X 7/8 In. (22 mm) | 12 |
| 7X***72 | Washer-Hard; (10.2x25.5x2.5-mm Thk) | 12 |
5t-3220 Platform Gp -Rh
| 1A***58 | Bolt 1.75 In. (44.45 mm) Long | 4 |
| 1A***63 | Bolt, Hex, Hd., 3/4"-10 N.C. X 2 1/2" | 8 |
| 29***57 | Handrail As | 1 |
210-2270 Recliner Gp-Seat
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
215-3880 Recliner Gp-Seat
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
186-3058 Recliner Gp-Seat
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 16***46 | Spring | 1 |
8y-3792 Seat Belt Gp -Retractable
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 1 |
| 8Y***92 | Seat Belt Group; -Retractable-Operator | 1 |
122-4617 Seat Belt Gp -Retractable
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 4D***32 | Locknut (7/16-20 Thd) | 1 |
220-0131 Seat Belt Gp -Retractable
| 17***37 | Spacer; (11.7x19.8x20.3-mm Thk)(Lh Seat Side) | 1 |
| 18***59 | Screw-Pan Head; (7/16-20x1.75-In)(Lh Seat Side) | 1 |
| 18***60 | Screw-Pan Head; (7/16-20x1.25-In)(Rh Seat Side) | 1 |
156-1149 Seat Belt Gp
| 15***49 | Seat Belt Group; -Retractable | 1 |
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 1 |
| 7X***10 | Washer-Hard; (15.5x29x3-mm Thk) | 1 |
156-1148 Seat Belt Gp -Retractable
| 15***48 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 1L***80 | Bolt; (7/16-20x1.5-In) | 1 |
8y-6857 Seat Belt Gp -Operator
| 0T***44 | Bolt (1.25" Long) | 1 |
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 2 |
| 7X***10 | Washer-Hard; (15.5x29x3-mm Thk) | 2 |
186-3053 Seat Gp
| 0T***44 | Bolt (1.25" Long) | 1 |
| 11***89 | Extension Group-Backrest | 1 |
| 16***23 | Armrest Group; -Rh | 1 |
252-9714 Seat Gp
| 16***23 | Armrest Group; -Rh | 1 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 3 |
| 22***31 | Seat Belt Group; -Retractable-Operator | 1 |
138-4021 Seat Gp
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 13***21 | Seat Group | 1 |
| 13***44 | Seat Group | 1 |
8w-7235 Seat Gp -Contour Mechanical
| 03***41 | Block-Adjustment | 2 |
| 15***03 | Seat Group-Suspension | 1 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 10 |
186-3055 Seat Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 11***91 | Rod | 1 |
| 17***37 | Spacer; (11.7x19.8x20.3-mm Thk)(Lh Seat Side) | 1 |
138-8344 Seat Gp
| 06***03 | Shim (.060mm Thk); (1.52-mm Thk) | 4 |
| 09***78 | Pin-Spring | 1 |
| 09***14 | Pin, Clevis | 1 |
186-3056 Seat Gp -Cloth
| 09***93 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
156-4388 Seat Gp
| 13***44 | Seat Group | 1 |
| 15***02 | Armrest Group; -Rh | 1 |
| 15***48 | Seat Belt Group; -Retractable-Operator | 1 |
8y-6907 Seat Gp
| 11***54 | Kit-Cover | 1 |
| 11***55 | Kit-Lumbar Valve; (Seat Frame As) | 1 |
| 11***56 | Kit-Spring Handle | 1 |
252-9713 Seat Gp
| 16***89 | Block-Slider | 4 |
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
186-3057 Seat Gp
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
8y-5986 Seat Gp -Cloth, Lumbar
| 06***03 | Shim (.060mm Thk); (1.52-mm Thk) | 4 |
| 09***78 | Pin-Spring | 1 |
| 1C***69 | Bolt (1/2 In. Long 5/16 In. Dia.); Support Assembly To Heater Group | 2 |
125-2231 Seat Gp -Contour Mechanical
| 03***41 | Block-Adjustment | 2 |
| 12***31 | Seat Group; -Contour Mechanical | 1 |
| 13***42 | Support As | 1 |
226-7677 Seat Gp -Cloth
| 09***43 | Pin-Cotter | 2 |
| 14***25 | Spring | 1 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
125-2230 Seat Gp-Adjustable -Operator-Air
| 12***09 | Support As | 1 |
| 12***30 | Seat Group-Adjustable; -Operator-Air | 1 |
| 15***49 | Seat Belt Group; -Retractable | 1 |
137-0078 Seat Gp-Adjustable -Operator-Comfort Air
| 03***41 | Block-Adjustment | 2 |
| 13***42 | Support As | 1 |
| 13***78 | Seat Group-Adjustable; -Operator-Comfort Air | 1 |
2a-6380 Seat Gp-Adjustable -Air-Operator
| 2A***80 | Seat Group-Adjustable; -Air-Operator | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 6 |
253-5207 Seat Gp-Adjustable
| 14***85 | Support As | 1 |
| 1F***50 | Nut Rops Support | 4 |
| 25***13 | Seat Group | 1 |
257-5596 Seat Gp-Adjustable
| 14***85 | Support As | 1 |
| 25***13 | Seat Group | 1 |
| 25***96 | Seat Group-Adjustable | 1 |
8w-2967 Seat Gp-Companion
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 1B***04 | Nut-Full | 1 |
| 1H***57 | Screw-Machine; (5/16-18x0.8-In) | 8 |
5t-6543 Seat Gp-Companion
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 4 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 2 |
255-8772 Seat Gp-Companion
| 14***25 | Support As | 1 |
| 22***77 | Seat Group-Suspension; -Cloth, Lumbar | 1 |
| 25***72 | Seat Group-Companion | 1 |
224-2677 Seat Gp-Suspension -Cloth, Lumbar
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 18***55 | Seat Group | 1 |
151-2703 Seat Gp-Suspension
| 10***87 | Suspension Group-Seat; -Adjustable | 1 |
| 14***45 | Kit-Slider Block; (Suspension Seat) | 1 |
| 15***03 | Seat Group-Suspension | 1 |
8y-6137 Seat Gp-Suspension
| 14***45 | Kit-Slider Block; (Suspension Seat) | 1 |
| 4F***79 | Bolt Clip To Tube Assembly (Aftercooler Radiator Inlet) | 1 |
| 8Y***92 | Seat Belt Group; -Retractable-Operator | 1 |
180-7310 Seat Gp-Suspension
| 16***15 | Suspension Group-Seat; -Variable | 1 |
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
8x-2822 Shaft Gp-Wiper
| 06***37 | Bushing-Linkage | 1 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 1 |
| 2G***22 | Bearing | 1 |
3t-3408 Speedometer Gp
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 3T***08 | Speedometer Group; -Standard | 1 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
155-6004 Speedometer Gp
| 15***04 | Speedometer Group | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 4 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 4 |
5t-7629 Control Gp-Steering
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 06***45 | Bearing-Tube | 1 |
| 10***70 | Spacer | 1 |
221-1206 Support Gp-Seat Belt
| 22***06 | Support Group-Seat Belt; -Cloth | 1 |
| 22***37 | Support As | 1 |
| 22***38 | Support As | 1 |
150-7719 Suspension Gp-Seat
| 10***17 | Bumper | 2 |
| 12***57 | Shaft | 2 |
| 12***28 | Kit-Roller; (Incls Parts Marked S) | 1 |
108-4587 Suspension Gp-Seat -Variable
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
169-8715 Suspension Gp-Seat -Variable
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
119-7028 Suspension Gp-Seat -Air
| 10***17 | Bumper | 2 |
| 11***28 | Suspension Group-Seat; -Air | 1 |
| 12***57 | Shaft | 2 |
8y-5982 Suspension Gp-Seat -Variable
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
| 10***96 | Kit-Suspension Shaft; ((Includes Bearings) | 1 |
199-5727 Suspension Gp-Seat -Air
| 10***03 | Fastener | 26 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
| 14***26 | Film-Instruction; (Seat Adjustment) | 1 |
2a-6772 Tachograph Ar
| 2A***72 | Tachograph Ar | 1 |
| 2A***74 | Drive Group-Tachograph; -Chassis | 1 |
| 2A***76 | Tachograph Group; -Cab | 1 |
2a-6686 Tachograph Ar
| 2A***86 | Tachograph Ar | 1 |
| 2A***73 | Drive Group-Tachometer; -Chassis | 1 |
| 2A***76 | Tachograph Group; -Cab | 1 |
2a-6776 Tachograph Gp -Cab
| 2A***76 | Tachograph Group; -Cab | 1 |
| 5T***75 | Tachograph Group | 1 |
| 7N***29 | Connector To Cab Wall | 1 |
5t-9075 Tachograph Gp
| 1L***12 | Adapter-Tachometer | 1 |
| 1S***36 | Flexible Shaft 66 Inches | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
8c-5471 Tachometer Gp
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
| 6V***68 | Nut (6-32)Thd; (No. 6-32) | 3 |
155-6005 Tachometer Gp
| 15***05 | Tachometer Group | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 4 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 4 |
3d-9943 Valve As-Horn -Cab
| 3B***09 | Pin Governor And Decelerator Control | 1 |
| 3D***43 | Valve As-Horn | 1 |
| 4D***33 | Spring | 1 |
9d-3886 Valve Gp-Air Control -Retarder
| 1S***99 | Graduating Spring | 1 |
| 2G***81 | Adapter | 1 |
| 3B***04 | Lockwasher--Sheet Assembly To Angle Assembly | 2 |
9d-8097 Valve Gp-Air Control -Service Brake
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 3 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 3 |
| 4D***06 | Plate | 1 |
143-2404 Valve Gp-Air Control -Secondary Brake
| 14***04 | Valve Group-Air Control; -Secondary Brake | 1 |
| 14***26 | Adapter | 1 |
| 2G***95 | Piston | 1 |
246-2901 Valve Gp-Air Control
| 14***26 | Adapter | 1 |
| 1S***99 | Graduating Spring | 1 |
| 24***01 | Valve Group-Air Control; -Service Brake-Cab | 1 |
5t-8174 Valve Gp-Air Control -Window Wiper
| 5T***23 | Knob; (Window Wiper) | 1 |
| 5T***74 | Valve Group-Air Control; -Window Wiper | 1 |
143-2405 Valve Gp-Air Control -Retarder
| 14***05 | Valve Group-Air Control; -Manual Retarder | 1 |
| 14***26 | Adapter | 1 |
| 1S***99 | Graduating Spring | 1 |
9d-8098 Valve Gp-Air Control -Secondary Brake
| 2G***95 | Piston | 1 |
| 2G***59 | Cam & Follower As | 1 |
| 2G***81 | Adapter | 1 |
115-6475 Vims Ar
| 11***71 | Wiring Group-Engine; -Vims | 1 |
| 11***61 | Cab Ar | 1 |
| 11***75 | Vims Ar | 1 |
224-9912 Visor Gp-Cab
| 22***12 | Visor Group-Cab | 1 |
| 22***13 | Visor As | 1 |
| 9X***42 | Screw-Truss Head (M6x1.0x12mm); (M6x1.00x12mm) | 4 |
5t-6548 Visor Gp-Cab
| 1D***76 | Bolt-Carriage; (3/8-16x0.875-In)(Rh & Lh Plates) | 2 |
| 3K***60 | Nut, Hex (3/8 - 16 Nc, Plastic Insert) | 1 |
| 5T***48 | Visor Group-Cab | 1 |
5t-1342 Washer Gp-Window
| 2D***35 | Grommet 20.64 mm(.813 In.)O.D. | 2 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 4 |
| 5P***74 | Tuber (R.H. Front 1.75 M(68.88 In.) | 0 |
2a-6685 Washer Gp-Window
| 1P***78 | Clamp; (Hose) | 4 |
| 2A***85 | Washer Group-Window | 1 |
| 4D***94 | Clip-- Compressor Clutch Wire To Compressor Body | 3 |
8w-6212 Window Gp -Door, Rh
| 2G***18 | Nut | 2 |
| 5K***05 | Nut-Barrel; (6-32-Thd) | 2 |
| 5P***25 | Seal (Use As Required) 5.4m | 0 |
2g-0263 Window Gp -Door, Lh
| 2G***63 | Window Group; -Door, Lh | 1 |
| 2G***12 | Window As; (Lh) | 1 |
| 6G***75 | Kit-Handle; (Lh)(Vent Window) | 1 |
8w-6211 Window Gp-Cab -Door, Rh
| 2V***31 | Catch | 1 |
| 3V***96 | Lock As-Window | 1 |
| 4V***43 | Stop | 1 |
5t-6550 Wiper Gp-Window
| 2A***26 | Screw-Machine | 1 |
| 3K***89 | Nut-Self Locking; (5-40-Thd) | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
Power Train
9w-4119 Actuator Gp-Rotary -Transmission
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 2 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
| 3E***54 | Ball | 1 |
6y-5644 Case Gp-Transmission
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 18 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 21 |
| 1D***17 | Nut-Plate And Angle Assembly To Hydraulic And Fuel Tanks; Nut Plate And Angle Assembly To Hydraulic And Fuel Tanks | 10 |
8w-5078 Control Gp-Traction
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 3 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 3 |
3t-0288 Control Gp-Transmission Hyd
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
131-2538 Cooler Gp-Rear Axle Oil
| 12***05 | Hose As | 1 |
| 12***06 | Hose As | 1 |
| 12***07 | Cooler Group-Rear Axle Oil | 1 |
129-1807 Cooler Gp-Rear Axle Oil
| 12***23 | Mount; (Motor) | 1 |
| 12***26 | Guard; (Finger) | 1 |
| 12***07 | Cooler Group-Rear Axle Oil | 1 |
7t-4997 Cover Gp-Shipping -Transmission
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 8 |
| 0S***83 | Bolt 31.75 mm(1.25 In.) Long | 2 |
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 4 |
8w-9545 Differential & Bevel Gear Gp
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 12 |
| 2B***73 | Bolt-Special; (3/4-16x3.15-In) | 16 |
104-5349 Differential & Bevel Gear Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 12 |
130-6634 Differential & Bevel Gear Gp
| 03***37 | Bolt-Self Locking; 3.81cm(1.5 In.)Long | 1 |
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 3 |
125-6182 Differential & Bevel Gear Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 10***51 | Pinion As | 1 |
8w-9544 Differential Gp
| 10***58 | Nut; (2-1/8-Thd) | 4 |
| 12***02 | Housing As-Differential | 1 |
| 13***45 | Housing As-Differential | 1 |
115-2969 Drive Gp-Final
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 16 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 6 |
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 16 |
8w-4448 Filter & Lines Gp-Torque Conv
| 03***45 | Connector | 1 |
| 06***93 | Bushing-Reducer; (1/2-14 Nptf) | 1 |
| 06***21 | Tee-Flared | 1 |
126-7840 Filter Gp-Oil -Rear Axle
| 12***95 | Spool | 1 |
| 12***40 | Filter Group-Oil; -Rear Axle | 1 |
| 12***44 | Base-Oil Filter | 1 |
132-2820 Filter Gp-Oil -Rear Axle Lubrication
| 12***95 | Spool | 1 |
| 13***20 | Filter Group-Oil; -Rear Axle Lubrication | 1 |
| 13***21 | Base-Final Drive Oil Filter | 1 |
6p-4603 Filter Gp-Oil -Parking Brake Rel, Xmsn
| 13***75 | Filter Element As-Oil; (Ultra High Efficiency)(Cleanout/High Efficiency) | 1 |
| 1R***19 | Filter Element As-Oil; (Standard Efficiency)(Power Train) | 1 |
| 2J***56 | Ring-Retaining | 1 |
4t-4760 Filter Gp-Oil -Torque Converter Charging
| 13***76 | Filter Element As-Oil; (Ultra High Efficiency)(Ultra High Efficiency) | 2 |
| 1H***00 | Pin--To Compression Release Shaft | 2 |
| 1R***41 | Filter Element As-Oil; (Standard Efficiency) | 2 |
7i-5683 Drive Gp-Final
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 12 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 3 |
| 10***32 | Hub | 1 |
115-2970 Drive Gp-Final
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 3 |
| 10***32 | Hub | 1 |
6g-9375 Drive Gp-Final
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 24 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 6 |
| 10***32 | Hub | 2 |
6y-5643 Gear Gp-Transfer
| 0S***02 | Bolt; (5/8-18x3.5-In) | 1 |
| 12***36 | Race-Bearing; Bearing-Race | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 16 |
131-2529 Housing As-Rear Axle
| 03***28 | Clip; (31.8mm Id) | 2 |
| 13***29 | Housing As-Rear Axle | 1 |
| 13***32 | Tube | 1 |
198-5952 Housing Gp-Rear Axle
| 13***29 | Housing As-Rear Axle | 1 |
| 17***89 | Plug-Magnetic; (Rear Axle Housing Drain) | 1 |
| 19***52 | Housing Group-Rear Axle | 1 |
6g-9380 Housing Gp-Rear Axle
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 10***44 | Plate | 1 |
134-0933 Lines Gp-Power Train Filter
| 12***40 | Filter Group-Oil; -Rear Axle | 1 |
| 12***03 | Hose As | 1 |
| 13***33 | Lines Group-Power Train Filter | 1 |
8w-4447 Lines Gp-Transmission Oil
| 0L***29 | Bolt- 7.63 cm(3 In.) Long - Location "H" | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 14 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 5 |
257-6988 Neutralizer Gp-Transmission
| 01***08 | Screw-Machine | 2 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
| 1B***06 | Key-Woodruff | 1 |
5t-6639 Neutralizer Gp-Transmission
| 01***08 | Screw-Machine | 2 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
| 1B***06 | Key-Woodruff | 1 |
3t-0036 Planetary Gp-Transmission
| 03***37 | Bolt-Self Locking; 3.81cm(1.5 In.)Long | 12 |
| 06***16 | Ring-Retaining | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 24 |
5t-3204 Power Train Ar
| 10***49 | Differential & Bevel Gear Group | 1 |
| 11***69 | Drive Group-Final | 1 |
| 11***57 | Torque Converter Group | 1 |
130-6447 Pump & Lines Gp-Rear Axle Lube
| 08***08 | Washer; (16.6x32x5-mm Thk) | 1 |
| 11***35 | Gear; (46-Teeth) | 1 |
| 12***48 | Pump Group-Gear; -Rear Axle Oil | 1 |
6t-6148 Pump Gp-Gear -Tc, Parking Brake Release
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 9 |
| 1B***14 | Key-Woodruff | 1 |
6t-6147 Pump Gp-Gear
| 1M***09 | Bearing-Sleeve | 2 |
| 2B***73 | Key-Woodruff | 2 |
| 2D***09 | Seal--To Cover & Plate Bearing Retainers | 4 |
3t-0260 Pump Gp-Gear -Xmsn Charging, Scavenge, Lube
| 13***73 | Seal-Lip Type | 1 |
| 16***68 | Seal-O-Ring | 4 |
| 1B***36 | Key-Woodruff | 2 |
3t-0259 Pump Gp-Gear
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 1S***74 | Seal-O-Ring | 1 |
| 3T***59 | Pump Group-Gear; -Transmission Charging-Scavenge, Lube | 1 |
125-8648 Pump Gp-Gear -Axle Oil
| 00***00 | Ring-Snap | 1 |
| 07***23 | Seal, Ring | 2 |
| 07***63 | Plate | 2 |
129-4193 Rim Gp
| 10***17 | Band-Bead Seat | 1 |
| 12***93 | Rim Group | 1 |
| 13***54 | Rim As | 1 |
5t-3234 Rim Gp-Demountable
| 03***57 | Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer | 20 |
| 10***06 | Rim As | 6 |
| 10***17 | Band-Bead Seat | 6 |
138-7580 Rim Gp-Demountable
| 10***17 | Band-Bead Seat | 1 |
| 13***54 | Rim As | 1 |
| 13***80 | Rim Group-Demountable | 1 |
142-5132 Rim Gp-Demountable
| 13***80 | Rim Group-Demountable | 6 |
| 14***32 | Rim Group-Demountable | 1 |
| 17***82 | Extension | 2 |
8x-1926 Rim Gp-Single
| 13***80 | Rim Group-Demountable | 1 |
| 2D***08 | Grommmet | 1 |
| 5T***90 | Valve Group-Tire | 1 |
7t-4554 Screen Gp-Magnetic -Transmission
| 1A***69 | Bolt (R.H. Side Flywheel Housing) | 2 |
| 3D***71 | Stud-Taperlock; (3/8-16x1.5-In)(3/8 In.Nc X 1 1/2) | 8 |
| 3S***39 | Cover-Top | 2 |
8x-0498 Shaft Gp-Drive
| 2N***86 | Bolt-12 Point Head | 8 |
| 8X***73 | Slip Joint Group | 1 |
| 8X***98 | Shaft Group-Drive; -Main | 1 |
8x-0473 Slip Joint Gp
| 2N***86 | Bolt-12 Point Head | 8 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
| 5T***82 | Kit-Seal | 1 |
1t-2005 Torque Converter Gp
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 24 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
8e-9000 Torque Converter Gp
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 16 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 1A***58 | Bolt 1.75 In. (44.45 mm) Long | 11 |
117-3357 Torque Converter Gp
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 16 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 11***57 | Torque Converter Group | 1 |
1t-1954 Torque Converter Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 12 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 24 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
1t-1830 Torque Converter Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 12 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 24 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
6y-3944 Torque Converter Gp
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 16 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 1A***58 | Bolt 1.75 In. (44.45 mm) Long | 11 |
3t-0034 Transmission Ar
| 3T***29 | Sensor Group-Speed; -Transmission Output | 1 |
| 3T***34 | Transmission Ar | 1 |
| 3T***36 | Planetary Group | 1 |
230-4111 Universal Joint Gp
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 8 |
| 10***87 | Spider And Bearing | 2 |
| 23***11 | Universal Joint Group | 1 |
230-4110 Universal Joint Gp
| 23***10 | Universal Joint Group | 1 |
| 23***11 | Universal Joint Group | 1 |
| 8W***52 | Universal Joint Group-Pump Drive | 1 |
3t-0289 Valve Gp-Transmission Control
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 1 |
| 1D***41 | Bolt 3.00 In.(7.62 cm) Long | 12 |
| 1F***11 | Bolt 3.50 In. (8.89 cm) Long | 1 |
2p-2859 Valve Gp-Relief -Xmsn Cooler Inlet
| 1P***20 | Spring (Outer) | 1 |
| 1S***43 | Spring (Inner) | 1 |
| 2K***94 | Pin-Spring; (7.94x76.2-mm) | 1 |
134-0939 Valve Gp-Flow Control & Relief -Axle Oil
| 13***37 | Piston | 1 |
| 13***39 | Valve Group-Flow Control & Relief; -Axle Oil | 1 |
| 1B***04 | Spring (Inner) | 1 |
134-0935 Valve Gp-Flow Control & Relief -Axle Oil
| 13***35 | Valve Group-Flow Control & Relief; -Axle Oil | 1 |
| 13***39 | Valve Group-Flow Control & Relief; -Axle Oil | 1 |
| 1N***98 | Plug; (Clutch/Brake Models Only) | 1 |
134-0936 Valve Gp-Flow Control & Relief
| 0T***68 | Bolt,Machine; Tube Mounting And Tube To Junction Block Uoc:Bsv,Bsx | 4 |
| 12***88 | Adapter | 1 |
| 13***36 | Valve Group-Flow Control & Relief; -Axle Oil | 1 |
6y-7906 Valve Gp-Lockup Clutch & Sync -Torque Converter
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
| 1D***40 | Bolt,Machine Fuel Filter Mounting | 4 |
| 1S***50 | Dowel | 2 |
8e-6146 Valve Gp-Lockup Clutch & Sync -Torque Converter
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
| 1D***40 | Bolt,Machine Fuel Filter Mounting | 4 |
| 1U***76 | Connector | 1 |
6t-3340 Valve Gp-Lube Relief -Transmission Oil Return
| 3J***93 | Spring | 1 |
| 6T***40 | Valve Group-Lube Relief; -Transmission Hydraulic Control | 1 |
| 7M***85 | Seal,Adapter,Motor Part Of Kit P/N 5r***29 | 1 |
6y-4257 Valve Gp-Pressure Control -Transmission
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 1 |
| 16***78 | Body-Load Piston | 7 |
| 20***18 | Plug As-Orifice | 2 |
9u-9716 Valve Gp-Relay -Lockup Clutch
| 2P***00 | Spring (Outer) | 1 |
| 2R***06 | Connector Valve Assembly To; Connector- Tube Assembly To Logic Valve | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
6i-9533 Valve Gp-Relay -Lockup Clutch
| 6I***33 | Valve Group-Relay; -Lockup Clutch | 1 |
| 7X***20 | Valve Group-Solenoid; (Synchronization) | 1 |
| 9U***16 | Valve Group-Relay; -Lockup Clutch | 1 |
3p-0348 Valve Gp-Relief
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1L***62 | Ring-Retaining | 1 |
| 2P***38 | Spool Assembly, Including:- | 1 |
3p-0349 Valve Gp-Relief
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1L***62 | Ring-Retaining | 1 |
| 2P***38 | Spool Assembly, Including:- | 1 |
3t-0290 Valve Gp-Selector & Press Cont -Transmission
| 03***30 | Bolt-Self Locking; (5/16unc X 3/4) | 1 |
| 12***33 | Spring As | 2 |
| 13***45 | Pin-Spring | 1 |
107-8238 Valve Gp-Solenoid
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 10***38 | Valve Group-Solenoid | 1 |
| 10***11 | Cartridge As | 1 |
193-8559 Valve Gp-Solenoid
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Cartridge As | 1 |
144-6292 Valve Gp-Solenoid
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 10***11 | Cartridge As | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
3t-0062 Valve Gp-Solenoid
| 11***03 | Seal-O-Ring | 1 |
| 13***34 | Screen As; (Traction Control Valve) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
7x-1120 Valve Gp-Solenoid
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 10***70 | Locknut; (1/4-20-Thd) | 1 |
| 4B***76 | Washer Generator Line Leads (Use As Required) | 1 |
9g-9988 Valve Gp-Solenoid
| 12***48 | Kit-Seal; (Solenoid Valve) | 0 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
| 16***43 | Washer-Identification; (16.8x38.1x.5mm Thk) | 1 |
9g-9208 Valve Gp-Traction Control -Antispin
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 10 |
140-7626 Wheel Gp-Rear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
| 10***40 | Retainer | 2 |
| 10***12 | Pin-Retaining | 4 |
6g-9345 Wheel Gp-Rear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
| 10***40 | Retainer | 2 |
| 10***12 | Pin-Retaining | 4 |
Service Equipment And Supplies
9g-9288 Cap Gp-Protection -Steering
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 2J***61 | Ring-Retaining | 1 |
5t-6942 Cap Gp-Protection
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 2J***61 | Ring-Retaining | 1 |
143-2245 Chock Gp-Wheel
| 14***45 | Chock Group-Wheel | 1 |
| 15***97 | Chock-Wheel | 2 |
| 15***01 | Bracket As | 1 |
6g-8390 Protection Gp-Vandalism -Brake, Hoist, Torque Converter
| 11***81 | Cover-Hydraulic Cap | 1 |
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 1M***49 | Ring (5.313" Dia.) | 1 |
100-9983 Film Gp
| 10***25 | Film-Stripe; (Caterpillar) | 1 |
| 10***26 | Film-Stripe; (Cat)(Lh) | 1 |
| 10***27 | Film-Stripe; (Cat)(Rh) | 1 |
3e-9631 Plate & Film Gp
| 10***36 | Film-Warning; (Cable Connection) | 1 |
| 10***37 | Film-Warning; (Electrical Shock Hazard) | 5 |
| 11***31 | Plate & Film Group; -Cab | 1 |
3e-9635 Plate & Film Gp
| 10***40 | Film-Warning; (Cable Connection) | 1 |
| 10***41 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
| 11***35 | Plate & Film Group; -Cab | 1 |
3e-9633 Plate & Film Gp
| 10***38 | Film-Warning; (Cable Connection) | 1 |
| 10***39 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
| 11***33 | Plate & Film Group; -Cab | 1 |
111-3341 Plate & Film Gp -Cab
| 10***43 | Film-Information; (Payload Measurement) | 1 |
| 10***42 | Film-Information; (Transmission Control) | 1 |
| 10***47 | Film-Instruction; (Retarding Guidelines) | 1 |
3e-9634 Plate & Film Gp
| 10***39 | Film-Warning; (Cable Connection) | 1 |
| 10***40 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
| 11***34 | Plate & Film Group; -Cab | 1 |
111-3342 Plate & Film Gp -Cab
| 10***68 | Plate-Warning; (Machine Operation) | 1 |
| 10***31 | Film-Instruction; (Automatic Retarder Control)(Arc) | 1 |
| 10***33 | Film-Information; (Payload Measurement) | 1 |
3e-9636 Plate & Film Gp
| 10***28 | Film-Instruction; (Hydraulic Accumulator)(Japanese) | 4 |
| 10***44 | Film-Warning; (Cable Connection) | 1 |
| 10***45 | Film-Warning; (Unit Injector) | 5 |
111-3333 Plate & Film Gp -Cab
| 10***35 | Film-Information; (Transmission Control)(Display Modes) | 1 |
| 10***39 | Film-Instruction; (Retarding Guidelines) | 1 |
| 10***13 | Film-Instruction; (Automatic Retarder Control) | 1 |
260-8758 Plate & Film Gp
| 10***77 | Plate-Warning-Rops/Fops | 1 |
| 14***76 | Film-Instruction; (Retarding Guidelines) | 1 |
| 26***58 | Plate & Film Group | 1 |
3e-9619 Plate & Film Gp
| 10***83 | Film Group | 1 |
| 11***92 | Plate-Instruction; (Air Conditioner) | 1 |
| 11***29 | Plate & Film Group; (Cab) | 1 |
102-8546 Plate & Film Gp
| 10***46 | Plate & Film Group | 1 |
| 10***41 | Film-Warning; (Cable Connection) | 1 |
| 10***42 | Film-Warning; (Elec Shock Hazard, Danish) | 5 |
111-3331 Plate & Film Gp -Cab
| 10***33 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***37 | Film-Instruction; (Retarding Guidelines) | 1 |
| 10***11 | Film-Instruction; (Automatic Retarder Control)(Arc) | 1 |
102-8548 Plate & Film Gp
| 10***48 | Plate & Film Group | 1 |
| 10***43 | Film-Warning; (Cable Connection) | 1 |
| 10***44 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
3e-9632 Plate & Film Gp
| 10***37 | Film-Warning; (Jumper Cable Use) | 1 |
| 10***38 | Film-Warning; (Unit Injector) | 5 |
| 11***32 | Plate & Film Group; -Cab | 1 |
105-2719 Plate & Film Gp
| 10***65 | Film-Warning; (Crankcase)(Crankcase Cover Removal) | 2 |
| 10***66 | Film-Warning; (Unit Injector) | 5 |
| 10***69 | Plate-Instruction; (Grease)(Grease) | 2 |
111-3340 Plate & Film Gp -Cab
| 10***40 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***44 | Film-Instruction; (Retarding Guidelines) | 1 |
| 10***18 | Film-Instruction; (Automatic Retarder Control) | 1 |
111-3334 Plate & Film Gp -Cab
| 10***36 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***40 | Film-Instruction; (Retarding Guidelines) | 1 |
| 10***14 | Film-Instruction; (Automatic Retarder Control) | 1 |
111-3332 Plate & Film Gp -Cab
| 10***34 | Film-Information; (Transmission Control)(Display Modes) | 1 |
| 10***38 | Film-Instruction; (Retarding Guidelines) | 1 |
| 10***60 | Film-Instruction; (Prelubrication Pump) | 1 |
111-3336 Plate & Film Gp -Cab
| 10***48 | Film-Information; (Payload Measurement)(Tpms) | 1 |
| 10***41 | Film-Information; (Transmission Control)(Display Modes) | 1 |
| 10***45 | Film-Instruction; (Retarding Guidelines) | 1 |
111-3335 Plate & Film Gp -Cab
| 10***37 | Film-Information; (Transmission Control)(Display Modes) | 1 |
| 10***41 | Film-Instruction; (Retarding Guidelines) | 1 |
| 10***15 | Film-Instruction; (Automatic Retarder Control) | 1 |
111-3337 Plate & Film Gp -Cab
| 10***40 | Film-Identification; (Truck Payload Measurement Sys)(Truck Payload Monitor System) | 1 |
| 10***46 | Film-Instruction; (Retarding Guidelines) | 1 |
| 10***66 | Film-Information; (Transmission Control)(Display Modes) | 1 |
111-3339 Plate & Film Gp -Cab
| 10***39 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***43 | Film-Instruction; (Retarding Guidelines) | 1 |
| 10***17 | Film-Instruction; (Automatic Retarder Control) | 1 |
111-3338 Plate & Film Gp -Cab
| 10***38 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***42 | Film-Instruction; (Retarding Guidlines) | 1 |
| 10***16 | Film-Instruction; (Automatic Retarder Control) | 1 |
102-8547 Plate & Film Gp
| 10***47 | Plate & Film Group | 1 |
| 10***42 | Film-Warning; (Cable Connection) | 1 |
| 10***43 | Film-Warning; (Unit Injector) | 5 |
3e-9637 Plate & Film Gp
| 10***45 | Film-Warning; (Cable Connection) | 1 |
| 10***46 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
| 11***37 | Plate & Film Group; -Cab | 1 |
111-3330 Plate & Film Gp -Cab
| 11***30 | Plate & Film Group; -Cab | 1 |
| 14***76 | Film-Instruction; (Retarding Guidelines) | 1 |
| 8T***91 | Plate; (Warning) (Universal) (W/O Cab-On The Top Of Panel At Right Hand Side Of Cms) | 1 |
102-8549 Plate & Film Gp
| 10***74 | Plate-Instruction; (Grease) | 2 |
| 10***23 | Film-Instruction; (Hydraulic Accumulator) | 4 |
| 10***49 | Plate & Film Group | 1 |
3e-9630 Plate & Film Gp
| 10***35 | Film-Warning; (Cable Connection) | 1 |
| 10***08 | Film-Information; (Engine Oil)(Install On Oil Filter Cap) | 1 |
| 11***30 | Plate & Film Group; -Cab | 1 |
100-8376 Plate-Warning -Stopping
| 10***76 | Plate-Warning; -Stopping | 1 |
Steering System
5t-0910 Accumulator Gp-Hydraulic
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 1 |
| 0S***92 | Bolt--Cover To Flywheel Housing | 8 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
9t-4785 Accumulator Gp-Steering -Charged
| 14***99 | Kit-Repair; (Accumulator Bladder)(Steering) | 1 |
| 16***05 | Ring | 1 |
| 16***06 | Spacer; (80x101.6x7.2-mm Thk) | 2 |
156-8273 Accumulator Gp-Steering -Uncharged
| 15***73 | Accumulator Group-Steering; -Uncharged | 1 |
| 5P***79 | Tag-Notice; (Cylinder Pressure) | 1 |
| 9T***85 | Accumulator Group-Bladder; -Charged | 1 |
6g-9570 Cylinder & Mtg Gp-Steering
| 1U***82 | Cylinder Group-Steering | 2 |
| 3J***99 | Self Locking Nut; (2 1/4-12) | 4 |
| 5T***03 | Plug | 4 |
1u-3182 Cylinder Gp-Steering
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
| 1D***28 | Bolt 8.26 cm(3.25 In.) Long | 4 |
1u-8331 Fitting Gp-Quick Disconnect
| 1U***28 | Fitting; (Quick Disconnect, Male) | 1 |
| 1U***29 | Cap-Dust; (Steering Tank) | 1 |
| 1U***31 | Fitting Group-Quick Disconnect | 1 |
8w-4449 Lines Gp-Steering
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 5 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
6g-9260 Link Gp-Steering
| 0S***56 | Bolt 4 1/4 In. (108 mm) --Front Support Assembly To Frame | 2 |
| 13***60 | Lock | 1 |
| 13***67 | Arm-Center | 1 |
2a-7217 Link Gp-Steering
| 2A***17 | Link Group-Steering | 1 |
| 2A***18 | Socket As; (Rh Threads) | 1 |
| 2A***19 | Socket As; (Lh Threads) | 1 |
5t-0912 Pump & Mtg Gp-Steering
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 2 |
| 4T***82 | Pump Group-Piston; -Steering | 1 |
| 5F***99 | Packing,Preformed Cover Mtg; Part Of Kit P/N 5r***25 Part Of Kit P/N 8s***57 | 1 |
9t-4247 Pump Gp-Metering -Hmu-Steering
| 05***12 | Ring-Retaining; (Internal) | 1 |
| 14***67 | Bolt-12 Point Head | 7 |
| 25***11 | Kit-Seal | 1 |
6e-6296 Tank & Filter Gp-Steering
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 8 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 46 |
| 13***76 | Filter Element As-Oil; (Ultra High Efficiency)(Ultra High Efficiency) | 1 |
5t-0870 Tank Gp-Hydraulic
| 1U***31 | Fitting Group-Quick Disconnect | 1 |
| 3B***31 | Elbow, 45 Degrees 1/2 Npt Adapter - Low Power Take-Off | 1 |
| 5C***65 | Bolt-Plt; (1/2unc X 1 1/8) | 9 |
6e-3528 Valve Gp-Breaker Relief -Steering Tank
| 1U***67 | Kit-Seal; (Breaker Relief Valve)(Hydraulic Tank) | 1 |
| 2S***63 | Seal 49.21 mm(1.9375 In.)I.D. | 2 |
| 5P***32 | Ring-Retaining; (23.47mm Id) | 1 |
4t-2742 Valve Gp-Relief -Steering
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***41 | Spring | 1 |
| 4T***42 | Valve Group-Relief; -Secondary Steering | 1 |
3g-4667 Valve Gp-Relief -Cylinder Crossover
| 1J***97 | Valve; (Push-Pull) | 2 |
| 2J***89 | Springs | 2 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
108-2184 Valve Gp-Relief -Steering
| 10***84 | Valve Group-Relief; -Steering | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***41 | Spring | 1 |
6t-8046 Valve Gp-Solenoid
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 3G***71 | Cartridge Assem. | 1 |
| 3G***75 | Seal Kit; (Includes Seals And Ring) | 1 |
149-2658 Valve Gp-Solenoid
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 14***11 | Cartridge Assem. | 1 |
| 14***58 | Valve Group-Solenoid; -Blade Lock | 1 |
149-2610 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***10 | Valve Group-Solenoid; -Axle Oil Cooler-Hydraulic Lockout | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
6e-6298 Valve Gp-Solenoid & Relief -Steering
| 10***84 | Valve Group-Relief; -Steering | 1 |
| 1P***77 | Flange-Half (For Tilt Ports On Valve) | 2 |
| 1P***78 | Flange; (To 5v***09 Tube Assembly) | 4 |
6g-9270 Wheel Gp-Front
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 24 |
| 14***37 | Retainer | 2 |
| 14***39 | Retainer-Seal | 2 |
785B serial number reference
On a 785B the ID/PIN plate is riveted to the truck frame, typically near the front frame rail or cab mount, with the same number stamped into the frame steel itself as a tamper check. The first three characters are the prefix identifying the model/configuration (6HK for the 785B), and the digits that follow are the sequential build number for that prefix; quote both together as the full serial when ordering parts or verifying configuration.
| Prefix | Identifies | Notes |
|---|---|---|
| 6HK | 785B Off-Highway/Mining Truck (rigid-frame haul truck) | Base and only known serial prefix for the 785B chassis, sequence 6HK00001 and up. Fitted with the Cat 3512 diesel, twin-turbocharged and aftercooled with electronic unit injection (EUI) - distinct from the later 785C's 3512B EUI engine. Build years run roughly 1992 into 1999, ahead of the 785C launch. Confirm exact build year and any late-run sub-variant against the full PIN with a dealer. |
Frequently asked questions
What engine does the Caterpillar 785B use?
A Cat 3512 EUI (electronic unit injection) V12 diesel, twin-turbocharged and aftercooled, rated 1029 kW (1380 hp) gross and 962 kW (1290 hp) net. It drives a six-speed planetary powershift transmission and double-reduction planetary final drives. This is the same EUI injection family as the later 785C, at an earlier power rating.
What is the 785B's operating weight?
Approximately 96,360 kg (212,440 lb) empty. Rated payload runs about 136,078 kg (300,000 lb, roughly 150 tons), for a combined loaded weight near 232,440 kg (512,440 lb). Exact figures vary by body and configuration; check the data plate for a specific unit.
What replaced the Caterpillar 785B?
The Cat 785C, which carries a further-uprated 3512B EUI engine near 1082 kW (1450 hp) gross and adds VIMS payload and health monitoring as standard equipment. The line continued afterward through the 785D and the current Tier 4 Final/Stage V 785 generation.
What 785B owners discuss
What's the main quirk mechanics point out about the 785B's 3512 EUI engine compared to an older mechanically governed Cat diesel?
The 785B (6HK serial prefix) runs a twin-turbocharged, aftercooled Cat 3512 EUI diesel, not a mechanical rack-and-governor engine. Injector solenoids are ECM-fired, and wiring to adjacent solenoids can share a common supply leg in the harness. Techs say the recurring issue isn't the injectors themselves but harness and connector corrosion in the hot engine valley - a chafed wire or corroded pin there sets fault codes that look like a bad injector but are really a wiring fault. Pull the ECM logged fault codes first before swapping injector solenoids on a rough-running or misfiring cylinder.
Do operators report the brakes or retarder overheating on long loaded descents?
Yes, and the consensus is it's almost never the brake discs themselves. The 785B uses fully enclosed, oil-cooled multiple-disc service brakes cooled continuously through water-to-oil heat exchangers. Reported overheating on grade traces back most often to a dust-packed brake oil cooler core restricting flow, or brake oil that is low or degraded, not worn friction material. Clean the cooler core from the clean side outward and check oil condition before condemning the brake pack. Have your dealer verify brake oil condition and cooling flow on any truck with a history of hot-brake complaints.
What commonly goes wrong with the 785B's suspension struts?
The truck rides on independent oil-pneumatic strut cylinders at each corner rather than springs. The most common field complaint is one corner sitting low, which usually points to a leaking rod seal letting oil past rather than a lost nitrogen charge. When recharging, the standing warning from techs is to use only dry nitrogen, never shop air or oxygen - mixing gases has been blamed for scorched residue inside struts on Cat trucks of this era. Charge pressure is load- and configuration-dependent, so set it to the figure on the strut plate or service manual for that specific truck rather than a remembered number. Have your dealer verify strut charge pressure and rod seal condition; these are high-pressure components and unsafe to service without the correct charging kit.
What tire and final-drive wear pattern do operators talk about most?
Operators size 785B tires to the actual haul cycle rather than just running the biggest tire available. TKPH/TMPH tire ratings are load-, speed-, and distance-dependent, and running past the tire's heat capacity is the failure mode mechanics see most - a wallowed-out or heat-separated casing on a truck that otherwise looks fine. Consensus is the tire, not the final drive, is the real limiting factor on cycle speed and haul distance. The double-reduction planetary final drives are considered a strong point of this platform and hold up well as long as oil level and sample results are kept current; low or contaminated final drive oil is the actual wear driver people report, not the gearset design.
Why does a used 785B sometimes show unexplained low power or odd fault codes after an engine swap or rebuild?
A frequent cause reported by techs is an ECM personality module or flash file that doesn't match the engine's actual arrangement or application identity. If a reman engine or a swapped ECM ends up loaded with the wrong calibration, the truck can crank and run but sit down on power or throw configuration-mismatch codes that don't match any visible mechanical symptom. First step on a truck with unexplained power complaints is confirming the loaded calibration matches the engine serial and arrangement, not chasing fuel or turbo issues.
What structural wear points should I check on a high-hour dump body and frame?
Inspect around the hoist cylinder mounts, suspension mount pads, and dump body pivot for cracking or past weld repairs - these are the highest-stress points on a rigid-frame haul truck and where fatigue shows up first on high-hour units. The dump body liner takes the heaviest abrasive wear and is expected to need replacement over the truck's life; check liner thickness and weld condition rather than treating it as original-life material. Surface rust in frame channels is normal on an outdoor-stored truck; deep pitting or crack-adjacent rust is not. Have your dealer verify any frame or hoist-mount weld repair with proper NDT inspection before returning the truck to service.
What should I check before buying a used 785B?
Compare frame hours to engine hours - a gap usually means a certified engine rebuild or replacement happened at some point, a plus if documented and a red flag if not. Cycle the dump body and hold it up unsupported to confirm the hoist cylinders don't drift down, and check the cylinders for rod scoring. Check engine oil for coolant contamination and look for leaks around the turbochargers and valve covers. Pull the ECM fault code history rather than trusting a truck with codes already cleared. Check strut ride height side to side and look for oil weeping at the rod seals. Ask for tire history versus the haul cycle the truck actually ran, since overheated or heat-separated tires often mean the truck was run harder than its configuration allowed. Have your dealer run a full pre-purchase inspection covering brakes, struts, and structural welds before committing to a used unit.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 785B part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.