Caterpillaroff-highway trucktractor
Caterpillar 784B
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 784B is an off-highway tractor, not a rigid dump-body truck: its own structure ends at the chassis, cab, engine, transmission, and yoke-type hitch, and it works by towing a separate non-powered dump wagon or trailer that oscillates on the hitch in four directions. It sits in Cat's large off-highway haul family, sized between the 776/777-class trucks and the 793/797-class rigid haulers, and was built as the tractor half of a tractor-wagon haul system alongside its 785B rigid-truck sibling. The 784B runs a Cat 3512TA V-12 diesel rated at roughly 1350 hp (1007 kW) gross, driving a 6-speed automatic transmission with EPTC II electronic control, all-wheel oil-cooled multiple-disc brakes with automatic retarder control, and pneumatic (nitrogen-over-oil) strut suspension front and rear. Tractor-only operating weight runs about 196,825 lb (89,280 kg), excluding whatever wagon is coupled behind it. Production ran 1994-1997 under a single PIN prefix, 5RK, before Cat moved the line to the 784C.
Across the 784B-to-784C change, the core tractor-and-towed-wagon layout carried over unchanged, but engine tune moved: the 784B's 3512TA is documented at roughly 1350 hp, while the later shared-chassis 784C tune of the 3512 lands closer to 1290 hp, so treat exact flywheel power as varying by series and always confirm against the data plate. The C-series also picked up mainframe commonality with the 785-series rigid trucks, which narrows the parts gap between the tractor and truck sides of the family. In today's used and parts market, the 784B matters mainly to mine and quarry operations still running wagon-based haul fleets (coal, aggregate, tailings) rather than rigid dump beds, where the tractor-wagon split lets an operator swap wagon capacity or configuration without replacing the power unit. New-equipment focus has since moved to rigid trucks, so 784B support increasingly runs on used and rebuilt inventory and on components shared with the 785B/789B/793B family: the 3512-series engine, EPTC-controlled transmission, and TDTO-class drivetrain fluids and parts.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 784B specifications
Engine
| Engine model | Cat 3512TA, V-12, four-stroke-cycle diesel, twin-turbocharged and aftercooled |
| Gross power | 1350 hp (1007 kW) as built for this tractor's serial range; a later shared-chassis prime-mover tune of the same 3512 family is rated lower, around 1290 hp (962 kW) - power rating varies by build/series |
| Cylinders | 12, in Vee configuration |
| Displacement | Approx. 51.8 L (3,161 cu in), standard for the 3512 engine family |
| Emissions tier | Built prior to nonroad emissions-tier certification for this power class; no tier rating published for this model |
Weights
| Operating weight (tractor configuration) | 196,825 lb (89,280 kg), tractor unit alone, excluding any towed wagon |
| Rated axle capacity | 130 ton (118 t) - an axle load rating tied to the towed-wagon application, not an onboard payload figure |
| Ground pressure | Not published for this model |
Dimensions
| Transport length | 30 ft 8 in (9.35 m) |
| Transport width | 22 ft 2 in (6.76 m) |
| Transport height | 17 ft 1 in (5.21 m) |
| Wheelbase / track gauge | Not published for this model - verify against chassis records |
| Hitch configuration | Yoke-type hitch oscillating in four directions to reduce frame stress, with rugged turn stops limiting wagon rotation - this is an off-highway tractor built to tow a separate wagon, not a rigid dump body |
Performance
| Transmission | 6-speed automatic (planetary powershift) with electronic programmable transmission control |
| Brakes | All-wheel, oil-cooled multiple-disc brakes |
| Suspension | Pneumatic (nitrogen-over-oil) strut suspension, front and rear |
| Travel speed | Not published in sources reviewed for this model - verify with dealer/OEM documentation |
| Drawbar / rimpull | Not published for this model - related haul-truck platforms in the same family publish drawbar figures, but none tie explicitly to this tractor build |
| Gradeability | Not published for this model |
Service capacities (summary)
| Fuel tank | Not documented for this exact model/serial range in sources reviewed - verify with dealer or service manual |
| Hydraulic system | Not documented for this exact model/serial range in sources reviewed - verify with dealer or service manual |
| Engine oil | Not documented for this exact model/serial range in sources reviewed - verify with dealer or service manual |
| Cooling system | Not documented for this exact model/serial range in sources reviewed - verify with dealer or service manual |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
784B fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat 3512 / 3512TA EUI V12 diesel | approx. 307-337 L (81-89 US gal) for the 3512 engine family lube system; exact tractor-installed sump refill figure not confirmed for this exact serial range - verify against data plate or dealer | Cat DEO (Diesel Engine Oil). SAE 15W-40 for normal ambient range; drop to SAE 10W or a multi-grade 0W/5W-40 synthetic in cold-start climates per Cat DEO viscosity-by-temperature guidance |
| Cooling system | not documented in available public sources for this exact model - confirm with dealer | Cat ELC (Extended Life Coolant) or Cat DEAC (Diesel Engine Antifreeze/Coolant), mixed per Cat cooling system water/coolant ratio spec; ELC preferred for extended service interval |
| Fuel tank | not documented in available public sources for this exact model - capacity varies by configuration/series; confirm with dealer | ASTM D975 No. 2-D diesel fuel (No. 1-D or a winter blend in cold climates per Cat fuel recommendations) |
| Transmission (powershift, 6-speed with EPTC II control) | not documented in available public sources for this exact model - confirm with dealer | Cat TDTO (Transmission/Drive Train Oil, TO-4 spec). SAE 30 or 50 in warm climates, SAE 10W in cold-start conditions per Cat TDTO viscosity chart |
| Final drives (each, two total) | not documented in available public sources for this exact model - confirm with dealer | Cat TDTO (TO-4 spec) or Cat FDAO (Final Drive Axle Oil); same viscosity-by-climate guidance as transmission |
| Hydraulic system and tank (hoist/steering) | not documented in available public sources for this exact model - confirm with dealer | Cat TDTO (TO-4) or Cat hydraulic oil per system spec current to the build date; viscosity selected by ambient temperature range same as transmission/final drive oil |
| Brake system (oil-cooled multiple-disc brakes, all wheels) | not documented in available public sources for this exact model - confirm with dealer | Same TO-4 spec oil as transmission/final drive circuit; brake cooling oil shares the powertrain oil spec on this tractor class |
| Grease (chassis, pins, bushings) | spec only - no reservoir capacity applies | Cat Multipurpose Grease (Cat MPGM), NLGI 2, extreme-pressure formulation for high-load pin and bushing points |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 784B maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the 784B beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S.O.S sampling on the 3512TA engine oil, the EPTC II transmission and differential/final-drive TDTO-class fluid, and the oil-cooled brake circuit to catch wear trends before failure. Track strut suspension and brake-accumulator nitrogen precharge over time rather than as a pass/fail check. Log yoke hitch and oscillation-pin wear at each interval since hitch fatigue drives most unscheduled tractor downtime on wagon-haul fleets.
Corrective & Common Repairs
Common failure points on the 784B center on the 3512TA's fuel system and turbocharger boost leaks, EPTC II transmission solenoid and electronic-control faults, brake-cooling oil circuit leaks at the wheel ends, and strut suspension cylinder seal weep. Yoke hitch bushing and turnstop wear from constant wagon oscillation is a recurring corrective item, along with automatic retarder control faults that show up as inconsistent braking under load.
Overhaul & Rebuild Points
Major overhaul work on the 784B centers on the 3512TA top end (injectors, turbocharger, cylinder pack), the transmission's torque converter and clutch packs, and the oil-cooled brake disc/plate packs at all four corners. The yoke hitch assembly - pins, bushings, turnstops - and the strut suspension cylinders are the other big-ticket rebuild points given how much cyclic load the wagon connection puts through them.
Seasonal & Environment Servicing
In cold climates, check ether/glow-plug starting aid function, coolant concentration, and step up engine oil viscosity grade for the 3512TA before winter. In hot, dusty mine or quarry conditions, shorten air-cleaner service intervals, keep the cooling package and brake-cooling oil radiators clear of packed debris, and inspect hitch and suspension dust seals more often since abrasive fines accelerate wear on the oscillating hitch and strut rods.
784B common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1D-4540 | Bolt,Machine Fuel Filter Mounting | Fuel system service | Check fitment → |
| 1R-0755 | Filter As-Fuel | Fuel system service | Check fitment → |
| 141-7903 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 6T-9504 | Filter Element As-Cab Air | Air intake service | Check fitment → |
| 7G-6599 | Filter Element-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
784B fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| MID 036 CID 0001 FMI 05 | Injector solenoid circuit, cylinder No. 1 - current below normal or open circuit | Broken or corroded injector wiring harness, damaged connector at the valve cover, or a failed injector solenoid coil | Inspect the injector harness and connector for damage or corrosion, check continuity to the ECM, cycle the injector with a service tool, replace the injector if the solenoid fails a resistance check |
| MID 036 CID 0100 FMI 01 | Engine oil pressure - data valid but below normal operating range | Low oil level, plugged oil filter, worn oil pump, or a failing oil pressure sensor | Shut the engine down safely, check oil level and filter condition, inspect for external leaks before restarting |
| MID 036 CID 0100 FMI 03 | Engine oil pressure sensor - voltage above normal (open circuit or short to battery voltage) | Damaged sensor, chafed wiring, or a corroded connector at the sensor | Inspect sensor wiring and connector, test sensor supply voltage and resistance, replace sensor if out of spec |
| MID 036 CID 0110 FMI 03 | Engine coolant temperature sensor - voltage above normal | Open circuit or short to +battery on the sensor signal wire, or a failed sensor | Check sensor connector for corrosion, verify wiring continuity, test sensor resistance against spec and replace if faulty |
| MID 036 CID 0110 FMI 04 | Engine coolant temperature sensor - voltage below normal | Short to ground on the signal circuit or a failed sensor | Inspect wiring for chafing or pinch points, check sensor ground, test resistance and replace sensor if needed |
| MID 036 CID 0168 FMI 02 | Electrical system voltage - erratic, intermittent, or incorrect | Loose or corroded battery cable, failing alternator or voltage regulator, or a poor engine/frame ground | Check battery terminals and cables, test charging system output, clean and re-torque ground connections |
| MID 036 CID 0190 FMI 08 | Engine speed/timing sensor - abnormal frequency, pulse width, or period | Sensor air gap out of adjustment, damaged timing/speed wheel teeth, or a wiring fault | Check and reset sensor air gap per spec, inspect the timing wheel for damage, inspect sensor wiring and connector |
| EPTC II shift solenoid circuit - FMI 05/06 (current below/above normal) | Transmission electronic control shift solenoid circuit open or shorted | Damaged shift solenoid wiring or connector, failed shift solenoid coil, or moisture intrusion at the transmission harness | Inspect transmission control harness and connectors, test solenoid coil resistance, replace solenoid or repair harness as needed |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
784B attachments & work tools
Hitch / towing (primary configuration)
The 784B is built as a tractor to tow a separate non-powered dump wagon on a yoke-type hitch that oscillates in four directions, with rugged turn stops limiting wagon rotation. This towing link, not an onboard dump body, is the machine's main working configuration; a hoist-control circuit on the tractor chassis operates the towed wagon's own hoist system.
Mounting / coupler system
This is a tractor unit, not a quick-coupler work-tool carrier and not a rigid truck with its own integrated dump body - there is no excavator-style attachment coupler. The yoke hitch is the sole coupling point, connecting to the towed wagon rather than to interchangeable work tools.
Wagon / trailer configuration
A conversion arrangement pairing the tractor with a towed dump wagon was offered for this model. Exact wagon capacity and body style available for a given serial number should be verified with your dealer, since wagon-side equipment is documented separately from the tractor itself.
Suspension
Front and rear pneumatic strut suspension is standard on the 784B and is not a field-selectable option; it cushions the tractor frame over rough haul roads. Suspension cylinders are a service/rebuild item, not an attachment choice.
Braking and retarder
All-wheel oil-cooled disc brakes are standard on the tractor, paired with automatic retarder control run through the EPTC II transmission electronics for grade control on loaded descents. No separate mechanical retarder attachment is fitted - the same brake package slows and holds the tractor on grade.
Monitoring and guarding
Later production serial numbers document onboard monitoring for payload, fluids, and machine health as standard equipment, alongside a ROPS cab with air conditioning, automatic chassis lubrication, and rear axle oil cooling and filtering. Confirm the exact monitoring equipment level fitted against the data plate for a specific serial number - some documentation places the full dash-display version with the following model generation.
All 784B assemblies by section
Every catalogued assembly group for the Caterpillar 784B. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
2w-0730 Aftercooler Gp-Water
| 03***30 | Bolt-Self Locking; (5/16unc X 3/4) | 22 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
4w-5159 Air Cleaner Gp -Rh
| 00***50 | Retainer; (Ring) | 1 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 8 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 1 |
4w-5160 Air Cleaner Gp -Lh
| 00***50 | Retainer; (Ring) | 1 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 8 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 1 |
1w-5254 Air Cleaner Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 8 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
| 1D***17 | Nut-Plate And Angle Assembly To Hydraulic And Fuel Tanks; Nut Plate And Angle Assembly To Hydraulic And Fuel Tanks | 8 |
7e-9491 Cartridge Gp-Turbocharger
| 1N***65 | Collar-Thrust | 1 |
| 1N***11 | Locknut-Turbocharger; (7/16-20-Thd) | 1 |
| 1N***05 | Spacer-Thrust | 1 |
102-0302 Cartridge Gp-Turbocharger
| 10***02 | Cartridge Group-Turbocharger | 1 |
| 10***40 | Ring-Seal | 1 |
| 10***42 | Kit-Cartridge; (Turbocharger) | 1 |
6i-2971 Lines Gp-Air
| 0A***26 | Fitting | 2 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 1 |
| 1D***16 | Nut,Plain,Hexagon Clip Uoc:Bsv,Bsx | 1 |
1w-5225 Lines Gp-Air -Intake
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 12***79 | Clamp-V-Band | 2 |
| 12***12 | Support-Exhaust Pipe; (Lh)(Lh) | 1 |
2w-0212 Manifold Gp-Exhaust
| 11***71 | Manifold-Exhaust; (Intermediate) | 6 |
| 11***72 | Manifold-Exhaust; (Front Rh) | 2 |
| 11***73 | Manifold-Exhaust; (Rh Rear, Lh Front) | 2 |
1w-5255 Muffler Gp
| 1K***72 | Locknut Horn To Guard | 7 |
| 1W***05 | Clamp | 1 |
| 1W***61 | C-Clamp | 1 |
4p-4463 Shield Gp-Exhaust
| 03***35 | Bolt-Locking; (5/16-18x0.625-In) | 39 |
| 1W***39 | Shield As-Manifold | 1 |
| 1W***41 | Shield As-Manifold | 1 |
102-0303 Turbocharger Gp
| 10***02 | Cartridge Group-Turbocharger | 1 |
| 10***03 | Turbocharger Group | 1 |
| 2A***62 | Screw,Cap,Hexagon H Diode Pig Tail To Grd; (1/4-20x.625 In) | 4 |
115-2258 Turbocharger Gp
| 10***02 | Cartridge Group-Turbocharger | 1 |
| 11***58 | Turbocharger Group | 1 |
| 11***08 | Housing-Turbine | 1 |
7w-5465 Turbocharger Gp
| 11***58 | Turbocharger Group | 2 |
| 12***36 | Gasket; (Turbocharger) | 2 |
| 2N***65 | Bolt-High Temperature; (3/8-16x1.75-In) | 8 |
7e-9492 Turbocharger Gp
| 1W***95 | Plate-Identification; (Turbocharger Cartridge) | 1 |
| 2A***62 | Screw,Cap,Hexagon H Diode Pig Tail To Grd; (1/4-20x.625 In) | 4 |
| 2F***08 | Screw; (6x0.25-In)(0 X 1/4 X In) | 2 |
Basic Engine
2w-0582 Air Compressor Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 6 |
| 1W***30 | Pan | 1 |
1w-8924 Air Compressor Gp
| 1D***40 | Bolt,Machine Fuel Filter Mounting | 2 |
| 1W***24 | Air Compressor Group | 1 |
| 2S***23 | Cover As; (Governor) | 1 |
117-0070 Air Compressor Gp
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 6 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 8 |
| 11***29 | Pan | 1 |
117-0071 Air Compressor Gp
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 3 |
| 11***70 | Air Compressor Group | 1 |
| 11***71 | Air Compressor Group | 1 |
1w-3893 Belt Tensioner Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
7e-5320 Camshaft Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 13***12 | Camshaft As | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 4 |
8n-9641 Cover Gp-Cylinder Block
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 72 |
2w-0204 Cover Gp-Flywheel Housing
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 39 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
2w-0202 Cover Gp-Front Housing
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 0S***92 | Bolt--Cover To Flywheel Housing | 2 |
| 10***85 | Cover As | 1 |
101-0831 Cover Gp-Valve Mechanism
| 10***31 | Cover Group-Valve Mechanism | 1 |
| 10***97 | Cover | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
7e-8756 Cover Gp-Valve Mechanism
| 10***97 | Cover | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
| 2W***72 | Seal-O-Ring; (221.62mm Id) | 1 |
8n-7103 Crankshaft Gp
| 12***45 | Bolt As; (5/8-18x4.25-In)(Counterweight) | 36 |
| 12***86 | Crankshaft As | 1 |
| 14***31 | Bearing As-Main; (Standard) | 7 |
106-2779 Cylinder Block As
| 10***79 | Cylinder Block As | 1 |
| 22***96 | Cap-Crankshaft Bearing | 7 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 3 |
100-8026 Cylinder Block As
| 10***26 | Cylinder Block As | 1 |
| 21***26 | Liner-Cylinder Block | 12 |
| 22***96 | Cap-Crankshaft Bearing | 7 |
7e-4940 Cylinder Block As
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
| 5P***49 | Washer (For Non-R.O.P.S. & Rollover Group) | 28 |
| 7E***40 | Cylinder Block As | 1 |
101-1227 Cylinder Block As
| 10***27 | Cylinder Block As | 1 |
| 11***93 | Liner-Cylinder | 12 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
101-1241 Cylinder Block As
| 10***41 | Cylinder Block As | 1 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
| 5P***49 | Washer (For Non-R.O.P.S. & Rollover Group) | 28 |
115-5154 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 10***79 | Cylinder Block As | 1 |
| 11***54 | Cylinder Block Group | 1 |
101-1244 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 10***41 | Cylinder Block As | 1 |
| 10***44 | Cylinder Block Group | 1 |
115-3505 Cylinder Block Gp
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 3 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 12 |
| 10***26 | Cylinder Block As | 1 |
4p-9892 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 12 |
4p-7263 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 2 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 4 |
172-0838 Cylinder Head As
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 17***36 | Cylinder Head As | 1 |
131-4339 Cylinder Head As
| 13***13 | Guide-Valve; (Standard) | 4 |
| 13***11 | Cylinder Head As | 1 |
| 13***39 | Cylinder Head As | 1 |
172-0836 Cylinder Head As
| 13***07 | Insert-Valve Seat; (Standard)(Intake) | 2 |
| 13***08 | Insert-Valve Seat; (Standard)(Exhaust) | 2 |
| 14***81 | Insert-Valve Seat; (0.51-mm Os Od)(Intake) | 0 |
7e-8760 Cylinder Head As
| 11***91 | Insert-Valve Seat; (Exhaust) | 2 |
| 14***45 | Insert-Valve Seat; (0.508-mm Os Od)(Inlet) | 0 |
| 14***46 | Insert-Valve Seat; (Exhaust 0.51-mm Os Od)(Exhaust) | 0 |
131-0411 Cylinder Head As
| 13***07 | Insert-Valve Seat; (Standard)(Intake) | 2 |
| 13***08 | Insert-Valve Seat; (Standard)(Exhaust) | 2 |
| 13***11 | Cylinder Head As | 1 |
7e-8759 Cylinder Head Gp
| 12***39 | Valve-Exhaust | 2 |
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
7e-8758 Cylinder Head Gp
| 11***91 | Gasket-Cylinder Head | 1 |
| 5B***13 | Bolt,Machine Bonnet And Tube Mtg | 2 |
| 5B***90 | Plug-Pipe | 1 |
9y-7687 Damper Gp
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 10 |
| 5M***09 | Plug-Expansion | 2 |
| 7B***35 | Bolt, Bolt,Machine Grab Iron Mounting Applicable W/O Rops | 10 |
8n-7182 Damper Gp
| 19***88 | Damper As | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 10 |
| 5P***50 | Washer-Front Support Frame Assembly To | 6 |
105-4702 Drive Ar-Fan -Variable Speed
| 10***64 | Drive Group-Fan; -Variable Speed | 1 |
| 10***10 | Lines Group-Hydraulic Fan; -Variable Speed | 1 |
| 10***02 | Drive Ar-Fan; -Variable Speed | 1 |
105-2271 Drive Ar-Fan -Non-Variable Speed
| 03***37 | Bolt-Self Locking; 3.81cm(1.5 In.)Long | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
129-2001 Drive Ar-Fan -Variable Speed
| 12***19 | Lines Group-Fan Drive; -Variable Speed | 1 |
| 12***96 | Drive Group-Fan; -Variable Speed | 1 |
| 12***33 | Control Group-Fan; -Variable Speed | 1 |
128-9734 Drive Ar-Fan -Variable Speed
| 12***34 | Drive Ar-Fan; -Variable Speed | 1 |
| 12***86 | Control Group-Fan; -Variable Speed | 1 |
| 12***01 | Drive Ar-Fan; -Variable Speed | 1 |
105-2274 Drive Ar-Fan -Variable Speed
| 10***74 | Drive Ar-Fan; -Variable Speed | 1 |
| 10***02 | Drive Ar-Fan; -Variable Speed | 1 |
| 10***42 | Control Group-Fan; -Variable Speed | 1 |
4p-0853 Drive Gp-Accessory -Upper, Rh
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***00 | Bearing-Sleeve | 2 |
9y-1595 Drive Gp-Accessory -Pump Drive
| 10***24 | Seal As; (Lip Type) | 1 |
| 13***98 | Bearing-Sleeve | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 4 |
115-0597 Drive Gp-Auxiliary
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
| 10***79 | Adapter As | 1 |
| 10***76 | Shaft As-Pump Drive | 1 |
1w-8704 Drive Gp-Auxiliary
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
| 1D***72 | Bolt- 13.97cm(5.5 In.)Long-Location "A" | 2 |
| 1T***20 | Bolt-12 Point Head; (3/8-16x1.25-In) | 2 |
133-5969 Drive Gp-Fan -Variable Speed
| 00***00 | Screw; (5/8-11x1-In) | 8 |
| 10***41 | Retainer-Bearing | 1 |
| 10***42 | Ring-Snap | 1 |
107-0784 Drive Gp-Fan -Non-Variable Speed
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
| 10***84 | Drive Group-Fan; -Non-Variable Speed-High Altitude Application | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 8 |
123-6996 Drive Gp-Fan -Variable Speed
| 0S***73 | Bolt (102mm Long); (1/2-13x4-In) | 8 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 10***28 | Pulley-Fan Drive | 1 |
100-8105 Drive Gp-Fan
| 10***05 | Drive Group-Fan; -Variable Speed | 1 |
| 10***39 | Shaft As-Fan Clutch | 1 |
| 10***41 | Retainer-Bearing | 1 |
105-4264 Drive Gp-Fan
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 10***28 | Pulley-Fan Drive | 1 |
| 10***05 | Drive Group-Fan; -Variable Speed | 1 |
7w-7285 Drive Gp-Fan
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
| 11***79 | Shaft-Tightener | 1 |
105-4266 Drive Gp-Fan -Crankshaft
| 10***66 | Drive Group-Fan; -Non-Variable Speed | 1 |
| 4W***50 | Pulley-Crankshaft; (8-Groove) | 1 |
| 4W***26 | Kit-Bushing; (Crankshaft Pulley)(Non-Flanged) | 1 |
9y-7669 Flywheel Gp
| 5P***39 | Washer-Hard; (28x42x4-mm Thk) | 12 |
| 8N***96 | Gear (151 Teeth) | 1 |
| 9S***93 | Bolt-12 Point Head; (1-14x101.6-mm) | 12 |
8n-7174 Gear Gp-Front -Standard Rotation
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
| 12***00 | Bearing-Sleeve | 2 |
112-5674 Gear Gp-Rear -Cam Drive
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 10***65 | Plate-Thrust | 1 |
| 10***68 | Washer-Thrust; (19.50 X 106 X 1.9mm Thk) | 2 |
7e-5323 Gear Gp-Rear
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 12***50 | Bearing-Sleeve | 1 |
| 1B***67 | Bolt, Hex. Hd., 5/8"-11 N.C. X 3" | 4 |
4p-3747 Guard Gp-Belt -Alternator
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 16***11 | Guard As; (Alternator) | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 2 |
7e-9086 Housing Gp-Flywheel
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 7 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 2 |
| 1D***74 | Bolt (L.H. Side Flywheel Housing) | 7 |
106-7600 Housing Gp-Flywheel
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 7 |
| 10***67 | Adapter | 1 |
| 10***98 | Housing As-Flywheel | 1 |
4p-5426 Housing Gp-Front -Accessory Drive
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 10***34 | Housing-Accessory Drive | 1 |
| 1B***18 | Washer; (25/64 X 5/8 X .064in Thk) | 6 |
8n-7734 Lifting Gp-Engine
| 15***26 | Bracket As | 2 |
| 2B***95 | Cap Screw--Tube Assembly To Air Inlet Pipe | 4 |
| 5P***48 | Washer--Bracket To L.H. Support Rail | 4 |
2w-0194 Lines Gp-Air Compressor
| 03***69 | Elbow-Flared; (1/2-14 Nptf) | 5 |
| 06***17 | Elbow-Flared | 1 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 1 |
115-0596 Lines Gp-Air Compressor
| 03***69 | Elbow-Flared; (1/2-14 Nptf) | 6 |
| 06***17 | Elbow-Flared | 1 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 1 |
7e-4836 Mounting Gp-Alternator
| 05***65 | Sleeve | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 14***16 | Belt-Serpentine; (Alternator) | 1 |
2w-0205 Pan Gp-Oil
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 10***62 | Dowel | 2 |
6i-2861 Piston & Rod Gp
| 10***30 | Bearing-Connecting Rod; (Standard) | 1 |
| 10***31 | Bearing-Connecting Rod; (0.63-mm Us Id) | 0 |
| 10***32 | Bearing-Connecting Rod; (1.27-mm Us Id) | 0 |
7w-3813 Seal Gp-Crankshaft
| 6I***09 | Seal Group-Crankshaft; (Cw Rotation) | 1 |
| 6I***10 | Seal Group-Crankshaft; (Ccw Rotation) | 1 |
| 7W***13 | Seal Group-Crankshaft | 1 |
7c-2655 Support Gp-Engine
| 1B***09 | Bolt-- Head To Cylinder Block | 8 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 4 |
| 2N***06 | Bolt-12 Point Head | 6 |
251-7646 Support Gp-Fan Drive
| 11***79 | Shaft-Tightener | 1 |
| 25***45 | Shaft | 1 |
| 25***46 | Support Group-Fan Drive | 1 |
7n-1863 Trunnion Gp-Engine
| 1D***66 | Bolt Bracket Assembly To Yoke | 20 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 20 |
| 5P***46 | Washer-Hard; (15.5x29x3-mm Thk) | 16 |
7e-5314 Valve Mechanism Gp
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
| 12***24 | Base As | 1 |
Braking System
6g-9881 Slack Adjuster Gp -Rear
| 1S***90 | Spring-Diaphragm | 2 |
| 2G***82 | Base | 1 |
| 2H***45 | Retainer,Packing Body Part Of Kit P/N 4j***80 | 2 |
2g-6535 Slack Adjuster Gp -Front
| 2G***02 | Spring | 2 |
| 2G***35 | Slack Adjuster Group; -Front Service Brake Lines | 1 |
| 2G***82 | Base | 1 |
5t-0917 Air Dryer Gp
| 2G***34 | Valve-Air Relief | 1 |
| 2G***59 | Air Dryer Group | 1 |
| 2G***82 | Kit-Cartridge; (Replacement)(Incl. Cartridge,Balls,& Seals) | 1 |
6g-9385 Brake Gp-Service & Parking -Tractor Rear
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 24 |
| 10***04 | Housing | 2 |
| 10***06 | Anchor-Brake | 2 |
5t-3280 Brake Gp-Service & Parking -Front
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 16 |
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 70 |
| 10***09 | Anchor-Brake | 2 |
8x-0222 Brake Gp-Service & Parking
| 10***04 | Housing | 1 |
| 10***06 | Anchor-Brake | 1 |
| 12***69 | Seal-Ring (517mm Id) | 1 |
5t-6544 Control Gp-Brake -Cab-Parking Brake
| 4D***78 | Valve Group-Air Control; -Parking Brake Switch | 1 |
| 4H***47 | Union; - Use When Relocating Air Override Valve To R.H. Side Panel If Equipped With Attachment Parking Brake Control | 1 |
| 4S***27 | Hose Assem. (53" Long Overall) | 1 |
8x-9491 Control Gp-Brake -Cab
| 00***33 | Tee-Pipe | 1 |
| 03***44 | Bolt-Eye; ( X) | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 4 |
8x-9477 Control Gp-Brake -Chassis
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 00***54 | Nipple-Pipe | 1 |
| 11***66 | Valve Group-Relay; (Master Cylinders) | 2 |
138-1035 Control Gp-Service Brake -Cab
| 00***33 | Tee-Pipe | 1 |
| 03***44 | Bolt-Eye; ( X) | 1 |
| 13***35 | Control Group-Service Brake; -Cab | 1 |
9t-7204 Cylinder Gp-Air -Front Brake
| 2K***91 | Ring-Retaining | 1 |
| 5P***47 | Seal-Lip; (25.48 mm Od) | 1 |
| 6E***57 | Kit-Seal; (Hydraulic Cooling) | 1 |
8x-7220 Cylinder Gp-Air/Hydraulic -Brake
| 25***38 | Valve | 1 |
| 31***27 | Kit-Brake Cylinder; (Brake) | 1 |
| 6W***05 | Expander Ring | 1 |
8w-3406 Cylinder Gp-Air/Hydraulic -Brake
| 13***31 | Seal | 1 |
| 25***38 | Valve | 1 |
| 2F***16 | Nut (Mounted On Flywheel Housing) | 8 |
115-9177 Hose Gp-Air -Gauge
| 11***77 | Hose Group-Air; -Gauge-Brake Pressure | 1 |
| 3B***87 | Coupling; (Pipe) | 1 |
| 3S***15 | Tee; -- Adapter Union-- To Check Valve On Warning System Reservoir | 1 |
2a-6964 Lines Gp-Brake -Rear
| 11***43 | Valve Group-Brake; -Automatic Retarder-Park, Secondary Brake | 1 |
| 1P***76 | Flange-Half (Hose To Pump); Flange-Half (32.54mm Bore) | 2 |
| 1P***78 | Flange; (To 5v***09 Tube Assembly) | 4 |
8w-4442 Lines Gp-Service Brake -Front
| 2G***35 | Slack Adjuster Group; -Front Service Brake Lines | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
5t-1060 Pump & Motor Gp-Brake Release -Parking, Secondary
| 01***80 | Lockwasher | 8 |
| 1T***16 | Bolt; (5/16-18x0.75-In)(12 Point Hd) | 4 |
| 1V***95 | Coupling | 1 |
130-8778 Retarder Ar-Automatic
| 11***93 | Harness As-Wiring; (Auto Retarder Control)(1 Pin) | 1 |
| 12***65 | Control Group-Retarder; -Automatic | 1 |
| 13***78 | Retarder Ar-Automatic | 1 |
2a-6515 Retarder Ar-Automatic
| 2A***15 | Retarder Ar-Automatic | 1 |
| 2A***17 | Control Group-Retarder; -Automatic-Electrical | 1 |
| 2A***18 | Control Group-Retarder; -Automatic | 1 |
5t-0885 Tank Gp-Air -Chassis
| 1D***19 | Nut-Retainer To Fan Bracket Assembly | 4 |
| 2K***55 | Pin (Spring) | 1 |
| 3H***42 | Seal; (Included In Seal Kit) | 1 |
2a-6504 Tank Gp-Air -Cab
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***40 | Reservoir | 1 |
| 2A***04 | Tank Group-Air; -Cab-Secondary | 1 |
6e-1851 Tank Gp-Brake
| 1A***58 | Bolt 1.75 In. (44.45 mm) Long | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
3e-8978 Valve & Mounting Gp -Automatic Retarder
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***15 | Switch As-Pressure; (Auto Retarder Control) | 1 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
217-7906 Valve & Mtg Gp-Brake
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Switch As-Pressure; (Tractor Brake) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
127-4661 Valve & Mtg Gp-Brake -Automatic Retarder
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Switch As-Pressure; (Tractor Brake) | 1 |
| 12***61 | Valve & Mtg Group-Brake; -Automatic Retarder | 1 |
7d-8075 Valve Gp-Air Control
| 00***83 | Ring-Snap | 1 |
| 1S***12 | Retainer-Valve | 1 |
| 4D***89 | Valve Assem. | 1 |
4d-0487 Valve As-Check -Primary Air Tank
| 4D***87 | Valve As-Check; -Air Supply-Primary Air Tank-Service Brake Control | 1 |
9d-3886 Valve Gp-Air Control -Manual Retarder
| 1S***99 | Graduating Spring | 1 |
| 2G***81 | Adapter | 1 |
| 3B***04 | Lockwasher--Sheet Assembly To Angle Assembly | 2 |
9d-8098 Valve Gp-Air Control -Parking Brake
| 2G***95 | Piston | 1 |
| 2G***59 | Cam & Follower As | 1 |
| 2G***81 | Adapter | 1 |
4d-3278 Valve Gp-Air Control -Parking Brake
| 3H***07 | Seal-O-Ring; (21.82mm Id) | 1 |
| 4D***78 | Valve Group-Air Control; -Parking Brake Switch | 1 |
| 5D***33 | Nut-Cap | 1 |
9d-3888 Valve Gp-Air Control -Retarder Pulled Unit
| 1S***20 | Knob; (White, Operator Control) | 1 |
| 1S***99 | Graduating Spring | 1 |
| 2G***95 | Piston | 1 |
9d-8097 Valve Gp-Air Control -Service Brake
| 14***12 | Valve Group-Brake; (Parking & Service) | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 3 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 3 |
113-1543 Valve Gp-Brake -Parking, Secondary
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 2 |
| 11***72 | Valve Group-Relief; -Parking, Secondary Brake | 1 |
| 11***43 | Valve Group-Brake; -Automatic Retarder-Park, Secondary Brake | 1 |
9t-4772 Valve Gp-Brake -Parking, Secondary
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 2 |
| 06***56 | Seal-O-Ring | 1 |
| 1K***66 | Spring-Compensator | 1 |
6d-3781 Valve Gp-Check -Automatic Retarder Control
| 2R***32 | Guide-Shuttle | 1 |
| 2R***13 | Cap | 1 |
| 3D***45 | Seal-Bottle To Connector | 1 |
9t-3096 Valve Gp-Check
| 9T***96 | Valve Group-Check; -Dead Engine, Lift Arm Lower | 1 |
1u-2644 Valve Gp-Check -Parking, Secondary
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 1U***44 | Valve Group-Check; -Secondary, Parking Brake | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
113-1072 Valve Gp-Relief -Parking, Secondary Brake
| 06***39 | Seal-O-Ring | 1 |
| 11***72 | Valve Group-Relief; -Parking, Secondary Brake | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
6e-6305 Valve Gp-Relief -Parking, Secondary Brake
| 06***39 | Seal-O-Ring | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3G***54 | Cap | 1 |
9t-4770 Valve Gp-Relief -Parking, Secondary Brake
| 06***39 | Seal-O-Ring | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3G***54 | Cap | 1 |
3e-8691 Valve Gp-Solenoid
| 10***17 | Cartridge As | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
189-8666 Valve Gp-Solenoid
| 10***17 | Cartridge As | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
Cooling System
9x-9482 Valve Gp-Solenoid
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
7e-5327 Connection Gp-Water -Outlet
| 11***94 | Cover | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 4 |
| 1W***64 | Elbow-Outlet | 1 |
4w-5892 Cooler Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 10***32 | Seal-O-Ring | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 6 |
4w-4980 Core Gp-Oil Cooler -Engine
| 4W***80 | Core Group-Oil Cooler; -Engine | 1 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
| 9S***85 | Plug--To Seal Hydraulic Pump To Sump Of Limit System | 1 |
141-4109 Core Gp-Oil Cooler -Front Brake, Tc
| 14***09 | Core Group-Oil Cooler; -Brake, Frame Mount-Transmission, Engine Mount-Tc, Bk, Hoist, Engine Mount | 1 |
| 8T***64 | Plug-Pipe; (1/8-27-Thd)(Cylinder Head) | 2 |
4w-5056 Core Gp-Oil Cooler -Transmission
| 4W***56 | Core Group-Oil Cooler; -Transmission | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
| 9S***91 | Plug,Machine Thread Fuel Injection Pump | 1 |
4w-0413 Core Gp-Oil Cooler -Rear Brake, Hoist-Front Brake, Tc
| 4W***13 | Core Group-Oil Cooler; -Rear Brake, Hoist-Front Brake, Tc | 1 |
| 5M***14 | Pipe Plug Cylinder Block Oil Pressure | 1 |
1n-3599 Cover Gp-Radiator Cap
| 1M***49 | Ring (5.313" Dia.) | 1 |
| 1N***99 | Cover Group-Protection; Radiator Cap Protection Cover Group | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
106-4687 Fan Gp-Suction
| 10***86 | Guard As-Fan | 4 |
| 10***87 | Fan Group-Suction | 1 |
| 11***40 | Spider As-Fan | 1 |
1w-5256 Fan Gp-Suction
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 7 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 16 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
183-7142 Gauge Gp-Coolant Level
| 10***84 | Dial | 1 |
| 18***42 | Gauge Group-Coolant Level; -Engine, Aftercooler | 1 |
| 1W***01 | Gasket | 1 |
6v-6704 Gauge Gp-Coolant Level
| 10***84 | Dial | 1 |
| 2F***06 | Screw-Machine (6-32x. 25in); (6-32x0.25-In) | 1 |
| 6V***04 | Gauge Group-Coolant Level; -Engine, Aftercooler | 1 |
4w-1510 Housing & Regulator Gp
| 11***74 | Valve As-Vent Line | 1 |
| 12***32 | Housing As-Regulator | 1 |
| 24***13 | Regulator-Water Temperature; (92-Deg C)(Water, Coolant Temperature) | 4 |
7e-9220 Lines Gp-Water -Upper
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 32 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 46 |
| 12***56 | Gasket | 2 |
2w-0211 Lines Gp-Water -Aftercooler
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 1A***64 | Bolt (4.75 In. Long-Location "B") | 2 |
| 1W***72 | Retainer-Ring To Pump Flange | 4 |
1w-0720 Lines Gp-Water -Turbocharger
| 03***70 | Tee | 2 |
| 06***08 | Bulkhead Tee | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
1w-5223 Lines Gp-Water -Cooler Lines
| 12***94 | Elbow | 1 |
| 1W***23 | Lines Group-Water; -Brake Cooler Lines | 1 |
| 1W***98 | Bonnet | 1 |
1w-5222 Lines Gp-Water -Lower
| 00***89 | Valve As-Drain | 2 |
| 03***67 | Connector-Flared -- Adapter To Hose As. | 2 |
| 03***68 | Elbow (For Use With Shallow Pan) | 2 |
7w-0486 Lines Gp-Water -Bypass
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 9 |
1w-0410 Pump Gp-Auxiliary Water
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
| 1T***32 | Seal-O-Ring; (234.54mm Id) | 1 |
| 1T***65 | Bolt 2.54 cm (1" Long) | 1 |
7e-9781 Pump Gp-Auxiliary Water
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***00 | Bearing-Sleeve | 1 |
2w-9728 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 16***76 | Seal Group-Water Pump; (Face Type) | 1 |
| 19***21 | Kit-Gasket; (Water Pump Rebuild) | 0 |
122-0500 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 12***50 | Seal Group-Face; (Water Pump) | 1 |
| 12***00 | Pump Group-Water | 1 |
2w-9729 Pump Gp-Water
| 12***00 | Pump Group-Water | 1 |
| 1H***78 | Seal-O-Ring | 1 |
| 2W***29 | Pump Group-Water; Water Pump Group | 1 |
7e-2507 Radiator Gp -Folded Core
| 11***68 | Tank As-Top | 1 |
| 16***86 | Seal-End Tank; (Narrow End) | 26 |
| 16***87 | Seal-End Tank; (Wide End) | 26 |
1w-5232 Radiator Gp -Folded Core
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 02***41 | Bolt-Socket Head; (1/4-28x0.625-In) | 8 |
| 03***76 | Elbow-Flared | 1 |
127-4440 Shield Gp-Water Manifold
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 12***40 | Shield Group-Water Manifold | 1 |
| 18***86 | Plate As; (Lh) | 1 |
132-2163 Shutter Ar-Radiator
| 13***63 | Shutter Ar-Radiator | 1 |
| 13***64 | Shutter Group-Radiator | 1 |
| 13***68 | Wiring Group-Engine; -Shutter | 1 |
8w-9381 Shutter Gp-Radiator
| 06***36 | Bushing-Flanged | 24 |
| 1B***03 | Nut Exhaust Pipe To Starting Engine Cylinder Block | 4 |
| 1B***30 | Nut-- Flame Arrestor Or Adapter To Pipe Assembly | 192 |
8w-9382 Shutter Gp-Radiator
| 00***10 | Tee; (Pipe) | 2 |
| 10***12 | Switch; (Air Conditioning) | 1 |
| 10***44 | Harness As; (Air Conditioning) | 1 |
132-2164 Shutter Gp-Radiator
| 00***10 | Tee; (Pipe) | 2 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 10***12 | Seal; (Interface) | 1 |
6d-1039 Valve Gp-Air Control -Radiator Shutter Inversion
| 3P***59 | Spring | 1 |
| 6D***39 | Valve As; -Exhaust Bypass-Exhaust Diverter | 1 |
| 6F***72 | Seal (.674" Inside Diameter) | 1 |
Electrical And Starting System
125-5855 Control Gp-Electronic -Cat Monitoring System
| 12***55 | Control Group-Electronic; -Cat Monitoring System | 1 |
| 15***17 | Control Group-Monitor; -Cat Monitoring System | 1 |
3e-5191 Control Gp-Power Train -Transmission/Chassis
| 3E***91 | Control Group-Electronic; -Transmission/Chassis | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 5 |
104-4287 Control Gp-Power Train -Transmission/Chassis
| 10***87 | Control Group-Electronic; -Transmission/Chassis | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 5 |
106-2996 Control Gp-Electronic -Steering Warning
| 10***96 | Control Group-Electronic; -Steering Warning | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 3 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
9x-7823 Control Gp-Electronic -Steering Warning
| 10***96 | Control Group-Electronic; -Steering Warning | 1 |
| 9X***23 | Control Group-Electronic; -Steering Warning | 1 |
| 9X***11 | Film-Steering Warning | 1 |
7x-6398 Lamp Gp-Dome
| 4S***88 | Terminal; (Blade-Crimp Type)(Male) | 1 |
| 5P***71 | Terminal (To Flasher Unit & Turn Signal Switch) | 1 |
| 7N***43 | Lamp-Miniature; (Dome) | 1 |
7x-6399 Lamp Gp-Dome
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
9g-9813 Alarm Gp -Action
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
9x-7803 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 4 |
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
7e-9084 Control & Mtg Gp-Engine Elek -Ecm-Advanced
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
235-8156 Control & Mtg Gp-Monitor
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***00 | Clip; (Tab) | 2 |
8x-9640 Control & Mtg Gp-Power Train
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 10***56 | Plate As | 2 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
5t-3207 Control Gp-Air Starting
| 1L***66 | Elbow-External Pipe Thread | 1 |
| 1L***22 | Connector-Pipe | 1 |
| 3B***52 | Elbow; --Cross To Hose Assembly To Air Gauge | 1 |
174-3493 Control Gp-Eng Ratings Elek
| 17***93 | Control Group-Eng Ratings Elek | 1 |
3e-5475 Control Gp-Eng Ratings Elek
| 17***93 | Control Group-Eng Ratings Elek | 1 |
| 3E***75 | Control Group-Eng Ratings Elek | 1 |
9x-3207 Control Gp-Electronic
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 7N***81 | Housing-Receptacle; (14-Ga To 18-Ga) | 1 |
108-2842 Control Gp-Fan -Variable Speed
| 10***95 | Sensor; (Brake Oil Cooler Temp) | 1 |
| 10***12 | Switch; (Air Conditioning) | 1 |
| 10***44 | Harness As; (Air Conditioning) | 1 |
129-1986 Control Gp-Fan -Variable Speed
| 10***32 | Control Group-Electronic; (Coolant Temp Sensor) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 11***60 | Switch As-Pressure; (A/C Compressor) | 1 |
106-4709 Control Gp-Fan
| 10***99 | Sensor As-Liquid Level; (Jacket Water Cooler Temp) | 1 |
| 10***88 | Harness As; (Fan Control) | 1 |
| 10***09 | Control Group-Fan; -Variable Speed | 1 |
128-9733 Control Gp-Fan -Variable Speed
| 12***33 | Control Group-Fan; -Variable Speed | 1 |
| 13***38 | Adapter | 1 |
| 3E***70 | Control Group-Electronic | 1 |
3e-3663 Control Gp-Machine -Automatic Retarder
| 10***88 | Control Group-Electronic; (Automatic Retarder) | 1 |
| 3E***63 | Control Group-Machine; -Automatic Retarder-Automatic Retarder | 1 |
| 3E***28 | Film-Instruction; (Automatic Retarder Control) | 1 |
110-7491 Control Gp-Power Train -Transmission/Chassis
| 11***91 | Control Group-Power Train; -Transmission/Chassis | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***75 | Housing-Receptacle; (Receptacle) | 1 |
199-9847 Control Gp-Power Train
| 19***47 | Control Group-Power Train; -Transmission, Chassis | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***73 | Housing-Receptacle; (14-Ga To 18-Ga) | 1 |
3e-5390 Control Gp-Power Train -Transmission/Chassis
| 11***88 | Film-Oht Eptc-Ii | 1 |
| 12***42 | Control Group-Power Train; -Transmission/Chassis | 1 |
| 3E***90 | Control Group-Power Train; -Transmission/Chassis-Transmission, Chassis | 1 |
118-2452 Control Gp-Power Train -Transmisson/Chassis
| 11***52 | Control Group-Power Train; -Transmisson/Chassis | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***75 | Housing-Receptacle; (Receptacle) | 1 |
121-2842 Control Gp-Power Train -Transmission/Chassis
| 12***42 | Control Group-Power Train; -Transmission/Chassis | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***75 | Housing-Receptacle; (Receptacle) | 1 |
199-9850 Control Gp-Power Train -Automatic Retarder Control
| 19***50 | Control Group-Power Train; -Automatic Retarder Control-Automatic Retarder | 1 |
| 9G***67 | Housing-Plug; (10 Pin) | 1 |
| 9G***73 | Housing-Receptacle; (14-Ga To 18-Ga) | 1 |
128-0869 Control Gp-Traction Electronic
| 12***69 | Control Group-Traction Electronic; -Aeta | 1 |
| 12***80 | Film-Information; (Traction Control) | 1 |
| 13***38 | Control Group-Traction Electronic; (Aeta) | 1 |
160-4891 Control Gp-Unprogrammed
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 14***80 | Battery Group-Electronic Control; (Road Analysis/Vims Main Module) | 1 |
| 16***91 | Control Group-Unprogrammed; -Vims Main Module-Road Analysis Control | 1 |
116-8903 Control Gp-Vids/Vims Main
| 11***03 | Control Group-Vids/Vims Main | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
| 3T***47 | Clip As-To Harness Connectors If 9g***54 | 1 |
6v-6702 Control Gp-Vids/Vims Main
| 16***82 | Control Group-Unprgmed Monitor; -Vids/Vims Main Module | 1 |
| 6V***02 | Control Group-Vids/Vims Main | 1 |
3t-5438 Distributor Gp-Electronic
| 3T***38 | Distributor Group-Electronic; -Transmission Speed | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 3 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 4 |
2a-6823 Heater Gp-Fuel
| 00***12 | Connector-Flared | 1 |
| 03***69 | Elbow-Flared; (1/2-14 Nptf) | 1 |
| 03***34 | Elbow-Flared | 2 |
123-6882 Heater Gp-Jacket Water
| 12***82 | Heater Group-Jacket Water | 1 |
| 6N***04 | Cap As-Dust; (Jacket Water Heater Elements) | 3 |
| 6T***64 | Element As-Jacket Water Heater | 3 |
7c-1107 Heater Gp-Jacket Water
| 4D***94 | Clip-- Compressor Clutch Wire To Compressor Body | 7 |
| 7C***07 | Heater Group-Jacket Water | 1 |
| 7C***07 | Wire As-Heater | 3 |
8w-4065 Heater Gp-Engine Oil
| 14***52 | Box As | 1 |
| 15***06 | Panel | 1 |
| 2H***33 | Screw-Machine; (10-32x0.25-In) | 1 |
3t-3967 Lamp Gp-Signal
| 03***35 | Lamp-Miniature | 1 |
| 3T***67 | Lamp Group; -Parking, Turn | 1 |
| 7D***13 | Lens Kit - Amber (Consists Of Lens, Gasket And Screws)> | 1 |
171-2065 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***72 | Body As-Lamp | 1 |
9x-1439 Lamp Gp-Flood -Backup
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
6n-7989 Lamp Gp-Flood -Ladder Access
| 2P***68 | Moulding | 1 |
| 6N***87 | Lamp-Sealed Unit | 1 |
| 6N***88 | Body As-Lamp | 1 |
162-3294 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
3t-4411 Lamp Gp-Flood -Ladder Access
| 3T***11 | Lamp Group-Flood; -Hood Light-Ladder | 1 |
| 6N***87 | Lamp-Sealed Unit | 1 |
| 6T***79 | Body As-Lamp | 1 |
9x-4381 Lamp Gp-Flood -Backup
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
168-1953 Lamp Gp-Head -Low Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***77 | Lens As; (Headlight, Low Beam) | 1 |
9x-7169 Lamp Gp-Head -Low Beam
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
9x-7166 Lamp Gp-Head -High Beam
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 9X***55 | Body As-Lamp | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
9x-7170 Lamp Gp-Head -High Beam
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
9x-7165 Lamp Gp-Head -Low Beam, Vertical Mount
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 9X***55 | Body As-Lamp | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
171-2067 Lamp Gp-Head -High Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***49 | Lens As; (Headlight, High Beam) | 1 |
| 15***52 | Bezel | 1 |
115-6488 Lamp Gp-Payload Signal -Rh Platform
| 11***88 | Lamp Group-Payload Signal; -Rh Platform | 1 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 9 |
| 6G***21 | Bracket | 1 |
135-0428 Lamp Gp-Signal
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***28 | Lamp Group-Signal; -Park, Turn | 1 |
| 14***39 | Harness As-Lighting; (Signal Lamp)(Signal Lamp) | 1 |
107-2282 Lamp Gp-Signal
| 10***82 | Lamp Group-Signal; -Vims Service Indicator | 1 |
| 10***83 | Lens-Blue; (Vims Service Indicator) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
115-6487 Lamp Gp-Signal -Payload-Cab
| 11***87 | Lamp Group-Signal; -Payload-Cab | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 4 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 9 |
6v-1108 Lamp Gp-Signal -Stop, Tail, Red
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
| 10***54 | Body As; (Lamp) | 1 |
8t-9684 Lamp Gp-Signal
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***38 | Housing-Receptacle-Sure Seal-Assemble | 1 |
8t-9683 Lamp Gp-Signal
| 7D***14 | Kit (Lens) (Includes Gasket, Screw & Lens) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
6v-1119 Lamp Gp-Signal
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
| 10***54 | Body As; (Lamp) | 1 |
108-1289 Lamp Gp-Signal
| 10***89 | Lamp Group-Signal; -Stop, Tail | 1 |
| 10***91 | Body As-Lamp | 1 |
| 2P***68 | Moulding | 1 |
6v-6649 Module Gp-Vids/Vims Interface
| 14***72 | Module Group-Vids/Vims Interface | 1 |
| 6V***49 | Module Group-Vids/Vims Interface | 1 |
144-7172 Module Gp-Vids/Vims Interface
| 14***72 | Module Group-Vids/Vims Interface | 1 |
| 9X***47 | Film-Identification; (Vids/Vims Interface Module) | 1 |
116-4850 Motor Gp-Prelubrication
| 03***96 | Connector; (Flared) | 1 |
| 11***50 | Motor Group-Prelubrication | 1 |
| 16***58 | Bracket As | 1 |
115-6482 Panel Gp-Circuit Breaker -Vims
| 11***82 | Panel Group-Circuit Breaker; -Vims | 1 |
| 11***40 | Harness As; (Vims)(Circuit Breaker) | 1 |
| 11***41 | Film-Instruction; (Fuse) | 1 |
2a-6491 Panel Gp-Circuit Breaker -Vims
| 11***09 | Film-Instruction; (Fuse) | 1 |
| 12***40 | Cover | 1 |
| 17***12 | Circuit Breaker As; (105-Ampere) | 1 |
100-3332 Sensor & Mtg Gp-Electric -Engine
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 10***32 | Sensor & Mtg Group-Electric; -Engine | 1 |
| 10***32 | Control Group-Electronic; (Coolant Temp Sensor) | 1 |
2a-6995 Sensor & Mounting Gp -Payload Monitor
| 03***67 | Ring; (Back Up) | 2 |
| 03***39 | Seal-O-Ring (Id=9.25mm) | 2 |
| 11***61 | Seal-O-Ring | 2 |
115-9168 Sensor & Mounting Gp -Fuel
| 11***94 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 11***68 | Sensor & Mounting Group; -Fuel | 1 |
| 11***41 | Guard | 1 |
105-4273 Sensor & Mounting Gp -Turbocharger Inlet
| 10***73 | Sensor & Mounting Group; -Turbocharger Inlet, Rh, Lh | 1 |
| 11***00 | Sensor Group-Pressure; -Turbo Inlet, Atmospheric Air | 2 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 4 |
165-6634 Sensor Gp-Coolant Level
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***34 | Sensor Group-Coolant Level; (Water, Coolant)(Scac Expansion Tank) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
111-3794 Sensor Gp-Coolant Level
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***94 | Sensor Group-Coolant Level; -Coolant Loss-Aftercooler, Jacket Water | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
3e-7826 Sensor Gp-Exhaust Temperature
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 26***47 | Adapter | 1 |
| 26***49 | Sensor Group-Exhaust Temperature | 1 |
8w-5331 Sensor Gp-Fuel Level -Float
| 4B***26 | Screw-Machine; (1/4-28x0.625-In) | 4 |
| 5P***29 | Seal-Rectangular | 1 |
| 8W***31 | Sensor Group-Fuel Level; -Float | 1 |
111-2094 Sensor Gp-Fuel Level -Ultrasonic
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***94 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 3E***77 | Wedge-Receptacle Lock; (4-Pin) | 1 |
124-9325 Sensor Gp-Fuel Level
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
198-8761 Sensor Gp-Position
| 19***61 | Sensor Group-Position; (Transmission Speed) | 1 |
| 7B***42 | Bolt, Hex. Hd., 1/4in.-20 N.C. X 1 1/4in. | 2 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
161-8906 Sensor Gp-Position -Accelerator Control
| 16***06 | Sensor Group-Position; -Accelerator Control | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
126-7896 Sensor Gp-Position
| 12***96 | Sensor Group-Position; -Transmission Shift Lever | 1 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
| 8T***28 | Seal-Lip Type | 1 |
3e-5400 Sensor Gp-Position
| 11***90 | Sensor Group-Position; (Rotary Position Sensor) | 1 |
| 3E***00 | Sensor Group-Position; -Accelerator Control | 1 |
110-8190 Sensor Gp-Position -Accelerator Control
| 11***90 | Sensor Group-Position; (Rotary Position Sensor) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
118-8471 Sensor Gp-Position
| 11***71 | Sensor Group-Position; -Transmission Gear | 1 |
| 7B***42 | Bolt, Hex. Hd., 1/4in.-20 N.C. X 1 1/4in. | 2 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
6v-5828 Sensor Gp-Position -Transmission Gear
| 6V***28 | Sensor Group-Position; Control Gp-Electronic-Actual Gear Switch | 1 |
| 7B***42 | Bolt, Hex. Hd., 1/4in.-20 N.C. X 1 1/4in. | 2 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
219-2384 Sensor Gp-Position
| 21***84 | Sensor Group-Position; (Rotary)(Engine Speed) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
163-8511 Sensor Gp-Pressure
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 16***11 | Sensor Group-Pressure; -Brake Monitor | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
175-3186 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***86 | Sensor Group-Pressure; -Suspension Cylinder | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
111-8800 Sensor Gp-Pressure -Turbocharger Inlet, Rh, Lh
| 11***00 | Sensor Group-Pressure; -Turbo Inlet, Atmospheric Air | 1 |
| 15***89 | Tube; (3cm) | 0 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
6v-1964 Sensor Gp-Pressure -Engine Oil
| 6V***64 | Sensor Group-Pressure; -Engine Oil | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
101-9980 Sensor Gp-Pressure -Payload Monitor
| 10***80 | Sensor Group-Pressure; -Payload Monitor | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
112-9778 Sensor Gp-Pressure
| 11***78 | Sensor Group-Pressure; -Differential Oil | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
110-5864 Sensor Gp-Pressure -Brake Monitor
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 11***64 | Sensor Group-Pressure; -Brake Monitor | 1 |
124-0328 Sensor Gp-Pressure -Payload
| 12***28 | Sensor Group-Pressure; -Payload | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
221-3417 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
6v-1926 Sensor Gp-Pressure -Brake Air-Atmospheric Air
| 6V***26 | Sensor Group-Pressure; -Turbocharger Outlet-Atmospheric Air-Turbocharger Inlet | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
100-4311 Sensor Gp-Pressure
| 10***11 | Sensor Group-Pressure | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
163-8492 Sensor Gp-Pressure -Turbocharger Inlet, Rh, Lh
| 16***92 | Sensor Group-Pressure; -Turbocharger Inlet, Rh, Lh-Atmospheric Air | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
3e-0487 Sensor Gp-Speed -Timing-Engine Speed
| 3E***87 | Sensor Group-Speed; -Timing-Engine Speed | 1 |
| 8T***42 | Tube-Heat Shrink; (3.2-mm Dia)(800-cm) | 0 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
126-1133 Sensor Gp-Speed
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***33 | Sensor Group-Speed; -Variable Speed | 1 |
5t-3235 Sensor Gp-Speed
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 16 |
| 1D***42 | Bolt 5 In. (12.7 cm) Long | 4 |
| 1D***47 | Bolt 9.50 In. (24.13 cm) Long | 4 |
102-9029 Sensor Gp-Speed -Timing-Engine Speed
| 10***29 | Sensor Group-Speed; -Timing-Engine Speed | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 3 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
3t-0029 Sensor Gp-Speed -Transmission Output
| 14***78 | Sensor Group-Speed | 1 |
| 1B***67 | Ball Bearing | 1 |
| 2A***62 | Screw,Cap,Hexagon H Diode Pig Tail To Grd; (1/4-20x.625 In) | 4 |
118-3909 Sensor Gp-Temperature -Aftercooler
| 11***09 | Sensor Group-Temperature; -Ambient Air | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
6v-1923 Sensor Gp-Temperature -Coolant
| 6V***23 | Sensor Group-Temperature; -Coolant | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
100-3055 Sensor Gp-Temperature -Torque Converter Oil-Differential Oil-Brake Oil-Transmission Oil-Aftercooler
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
128-5662 Sensor Gp-Temperature -Differential Oil
| 12***62 | Sensor Group-Temperature; -Differential Oil | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
133-9754 Starting Aid Gp-Ether
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 11***54 | Nozzle As-Ether | 2 |
| 13***59 | Hose As; (355 mm) | 2 |
119-1692 Starting Aid Gp-Ether
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 1 |
| 11***92 | Starting Aid Group-Ether | 1 |
| 2A***88 | Tube | 1 |
133-9753 Starting Aid Gp-Ether
| 13***53 | Starting Aid Group-Ether | 1 |
| 13***62 | Fitting As | 1 |
| 2A***89 | Plate As | 1 |
2a-6495 Starting Aid Gp-Ether
| 2A***95 | Starting Aid Group-Ether | 1 |
| 2A***89 | Plate As | 1 |
| 5P***98 | Clamp-Assemble One Each To Valve As | 1 |
8w-4070 Starting Ar-Cold Weather
| 7C***07 | Heater Group-Jacket Water | 1 |
| 7X***08 | Film-Instruction-Attach To 8w***47 Box As | 1 |
| 8W***65 | Heater Group-Lube Oil | 1 |
7c-3372 Starting Motor Gp-Air
| 03***17 | Washer-Spring | 2 |
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 1 |
| 11***99 | Housing-Motor | 1 |
4w-6634 Starting Motor Gp-Air
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 1 |
4w-6633 Starting Motor Gp-Air -Vane
| 03***17 | Washer-Spring | 2 |
| 11***99 | Housing-Motor | 1 |
| 1L***97 | Ring-Snap; (External) | 1 |
105-8827 Suppressor Gp-Electronic
| 10***27 | Suppressor Group-Electronic; -Air Conditioner Compressor | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
8c-5681 Switch As-Limit -Neutralizer
| 8C***78 | Switch As-Limit | 1 |
| 8C***81 | Switch As-Limit; -Transmission Neutralizer | 1 |
| 8C***76 | Head-Switch Actuator | 1 |
9x-7781 Switch Gp-Bypass -Pulled Unit Screen-Transmission Charging-Transmission Oil Supply-Tc, Front Brake Cooling-Differential Oil Filter-Transmission Lubrication
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 4B***43 | Nut,Plain,Hexagon Plate Mtg | 2 |
| 4B***63 | Washer; (4.7x11x1.2-mm Thk) | 2 |
164-7577 Switch Gp-Bypass -Pulled Unit Screen-Transmission Oil Supply-Tc, Front Brake Cooling-Differential Oil Filter-Transmission Lubrication
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
9x-3040 Switch Gp-Flow -Coolant
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
171-8710 Switch Gp-Flow
| 17***10 | Switch Group-Flow; -Coolant | 1 |
123-2993 Switch Gp-Liquid Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***93 | Switch Group-Liquid Level; -Engine Oil-Ster, Fan Dr Oil (Engine On)-Torque Converter Oil-Torque Conv Oil (Low, Cold)-Front, Rear Engine Oil-Steering Oil, Engine Off-Torque Conv Oil (Low, Hot)-Auxiliary Coolant-Brake Oil, Hoist-Engine Coolant | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
9g-7641 Switch Gp-Start -Engine, Key-Vims Service
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
7e-8098 Thermocouple Gp
| 5N***26 | Connector; Adapter-.25in Pipe Thread | 1 |
| 6K***79 | Clip; (4.76mm Id) | 1 |
| 7E***30 | Thermocouple | 1 |
2a-6506 Wiring Gp-Cab -Ems
| 01***42 | Screw-Machine; (6/32x1-In) | 2 |
| 10***58 | Flasher As; (24-Volt) | 1 |
| 11***49 | Harness As-Cab; (Aeta) | 1 |
125-4233 Wiring Gp-Cab -Differential Oil Filter/Vims-Vims
| 10***66 | Bezel | 1 |
| 12***33 | Wiring Group-Cab; -Differential Oil Filter/Vims-Vims | 1 |
| 12***55 | Control Group-Electronic; -Cat Monitoring System | 1 |
115-6473 Wiring Gp-Cab -Vims
| 10***11 | Sensor Group-Pressure | 1 |
| 10***58 | Film-Instruction; (Console) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
125-5839 Wiring Gp-Cab -Differential Oil Filter/Ems
| 10***66 | Bezel | 1 |
| 12***36 | Plate | 1 |
| 12***39 | Wiring Group-Cab; -Differential Oil Filter/Ems | 1 |
2a-7103 Wiring Gp-Cab -Payload/Ems
| 10***53 | Bracket As | 1 |
| 2A***03 | Wiring Group-Cab; -Payload/Ems | 1 |
| 2A***32 | Harness As; (Payload, Cab) | 1 |
8x-9492 Wiring Gp-Cab -Stop Lights
| 2M***46 | Switch As-Air Pressure; (Stop Lamp) | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
| 6G***17 | Harness As; (Stop Lights) | 1 |
2a-6513 Wiring Gp-Chassis -Chassis (Ems)
| 03***48 | Clip; (11.11mm .437in Id) | 7 |
| 03***97 | Boot | 2 |
| 09***04 | Terminal-Ring; (2-Ga, 3/8-In Screw) | 2 |
115-6476 Wiring Gp-Chassis -Chassis
| 03***48 | Clip; (11.11mm .437in Id) | 7 |
| 03***97 | Boot | 2 |
| 09***04 | Terminal-Ring; (2-Ga, 3/8-In Screw) | 2 |
2a-6725 Wiring Gp-Chassis -Tractor
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***43 | Harness As; (Trailer Sensors) | 1 |
| 10***49 | Harness As; (Payload Lamps) | 1 |
115-6490 Wiring Gp-Chassis -Vims
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 10***45 | Clip | 1 |
| 11***90 | Wiring Group-Chassis; -Vims | 1 |
111-4371 Wiring Gp-Engine -Vims
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 3 |
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
132-2168 Wiring Gp-Engine -Shutter
| 13***68 | Wiring Group-Engine; -Shutter | 1 |
| 13***29 | Harness As; (Fan Clutch) | 1 |
| 13***57 | Cover | 1 |
121-4128 Wiring Gp-Engine -Harness & Sensor
| 09***52 | Bar | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 17 |
117-1354 Wiring Gp-Prelubrication -Engine Prelube-Cab
| 11***54 | Wiring Group-Prelubrication; -Engine Prelube-Cab | 1 |
| 11***55 | Harness As; (Engine Prelube) | 1 |
| 3T***48 | Clip Assembly - Housing Plug To Housing Recp. | 1 |
Engine Arrangement
7e-9079 Engine Ar
| 10***32 | Sensor & Mtg Group-Electric; -Engine | 1 |
| 10***14 | Fumes Disposal Group | 1 |
| 10***71 | Drive Ar-Fan; -Non-Variable Speed | 1 |
121-5785 Engine Ar
| 10***14 | Fumes Disposal Group | 1 |
| 10***31 | Cover Group-Valve Mechanism | 10 |
| 10***38 | Breather Group; -Crankcase | 1 |
Frame And Body
2a-6507 Cowling Gp
| 11***66 | Cowling As | 1 |
| 2A***07 | Cowling Group | 1 |
| 2A***92 | Cover As | 1 |
8x-9478 Fender Gp -Rear
| 1F***48 | Nut 12.70 mm(.50 In.) Thread | 57 |
| 3B***31 | Pin-Cotter | 4 |
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 104 |
8w-4439 Fender Gp -Front
| 1D***17 | Nut-Plate And Angle Assembly To Hydraulic And Fuel Tanks; Nut Plate And Angle Assembly To Hydraulic And Fuel Tanks | 17 |
| 2G***58 | Strip | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 18 |
2a-7046 Frame As
| 03***60 | Bar | 2 |
| 03***58 | Bar | 2 |
| 11***18 | Plate | 4 |
8x-9479 Frame Gp
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 12 |
| 11***73 | Support As | 1 |
| 2A***38 | Bolt-(3/4" X 2-1/4")-Rops Mounting Bracket To Fender | 8 |
234-6007 Frame Gp
| 21***91 | Plate | 1 |
| 23***07 | Frame Group | 1 |
| 23***08 | Plate | 1 |
5t-3230 Guard Gp-Drive Shaft
| 21***50 | Guard As | 1 |
| 2A***38 | Guard As | 1 |
| 2A***41 | Guard As | 1 |
8x-9481 Hitch Gp-Towing
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 8 |
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 16 |
| 0S***26 | Bolt, Hex. Hd., 3/4in.-10 N.C. X 1 1/2in. | 4 |
5t-3214 Hood Gp-Truck
| 0T***83 | Washer--Junction Box To Rear Support | 1 |
| 1A***99 | Dowel | 1 |
| 1D***64 | Grab Iron) | 1 |
2a-6509 Ladder Gp
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 1 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 1 |
2a-6729 Lubrication Gp-Automatic
| 00***83 | Nipple-Pipe; (Hexagon) | 4 |
| 05***72 | Tee-Swivel | 4 |
| 14***59 | Hose As; (Lh & Rh) | 4 |
8w-7903 Mirror Gp-Rear View
| 3B***05 | Pin Split Cotter | 2 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 2 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 4 |
8w-4594 Pump Gp-Lubrication -Automatic
| 5T***00 | Pump Group-Lubrication; -Automatic Lubrication | 1 |
| 8W***94 | Pump Group-Lubrication; -Automatic Lubrication | 1 |
5t-7800 Pump Gp-Lubrication -Platform, Rh
| 00***10 | Tee; (Pipe) | 1 |
| 03***46 | Elbow | 1 |
| 10***51 | Bracket | 1 |
8x-9484 Stop Gp-Steering
| 0S***26 | Bolt, Hex. Hd., 3/4in.-10 N.C. X 1 1/2in. | 12 |
| 1D***09 | Bolt 6.99 cm(2.75 In.) Long | 20 |
| 1F***48 | Nut 12.70 mm(.50 In.) Thread | 17 |
8x-9485 Suspension & Mtg Gp-Front
| 12***50 | Shim; (1.6-mm Thk) | 16 |
| 17***85 | Core-Valve | 1 |
| 1D***38 | B. 1" N.C. X 3 1/2" | 8 |
6e-6070 Suspension Gp-Front
| 17***06 | Plate | 1 |
| 17***85 | Core-Valve | 1 |
| 1D***10 | Bolt 82.55 mm (3.25 In.) Long) | 16 |
2a-6987 Suspension Gp-Rear
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 12 |
| 10***60 | Suspension Group-Rear; -Nacd | 2 |
| 11***08 | Cover-Suspension | 2 |
6e-6073 Suspension Gp-Rear
| 10***56 | Head | 1 |
| 17***85 | Core-Valve | 1 |
| 1A***05 | Bolt (5 In. Long); (5/8-11x5-In) | 4 |
2a-6863 Suspension Gp-Rear
| 11***08 | Cover-Suspension | 2 |
| 11***09 | Clamp-Hose | 4 |
| 11***77 | Suspension Group-Rear; -Pulled Unit | 2 |
116-1977 Suspension Gp-Rear
| 10***58 | Head | 1 |
| 10***59 | Cylinder As | 1 |
| 11***77 | Suspension Group-Rear; -Pulled Unit | 1 |
6e-6075 Suspension Gp-Rear
| 10***56 | Head | 1 |
| 17***85 | Core-Valve | 1 |
| 1A***05 | Bolt (5 In. Long); (5/8-11x5-In) | 4 |
107-2860 Suspension Gp-Rear
| 10***58 | Head | 1 |
| 10***59 | Cylinder As | 1 |
| 10***60 | Suspension Group-Rear; -Nacd | 1 |
2a-6512 Tread Gp-Non-Skid
| 11***52 | Tread | 1 |
| 2A***12 | Tread Group-Non-Skid | 1 |
| 5P***96 | Tread 152 mm (6 In.) Required; (.40m Lg Ea) | 1 |
5t-5009 Valve Gp-Lube Distribution -3-Injector
| 19***54 | Packing | 1 |
| 5T***09 | Valve Group-Lube Distribution; -3-Injector-Steering Cyl, Linkage, Rh, Lh-Hoist, Rear Susp Cyl, Rh, Lh-Front Susp, Steer Cyl, Rh, Lh | 1 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 3 |
5t-5010 Valve Gp-Lube Distribution -5 Injector
| 19***54 | Packing | 5 |
| 5T***10 | Valve Group-Lube Distribution; -5-Injector | 1 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 5 |
8w-2597 Valve Gp-Lube Distribution -4-Injector
| 19***54 | Packing | 4 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 4 |
| 8W***55 | Kit-Injector; (Lube Valve) | 1 |
8x-9476 Walkway Gp
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 0S***20 | Bolt--Customer Grounding Bolt | 10 |
| 2A***33 | Rail As | 1 |
Fuel System
7w-5397 Drive Gp-Tachometer
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 8 |
6i-4470 Filter Gp-Fuel
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 5 |
| 1R***55 | Filter As-Fuel; (Advanced Efficiency) | 2 |
2w-6071 Filter Gp-Primary Fuel
| 1L***69 | Ring-Retaining | 1 |
| 2H***29 | Ring - Retaining External | 1 |
| 2J***57 | Packing,Preformed Screw Assembly Part Of Kit P/N 5r***25 | 1 |
7e-8836 Injector Gp-Fuel
| 7E***36 | Injector Group-Fuel | 1 |
| 8J***25 | Seal-O-Ring | 1 |
| 9X***35 | Seal-O-Ring | 1 |
2a-6726 Lines Gp-Fuel
| 00***01 | Elbow (To Serial No 1md225) | 2 |
| 03***50 | Elbow (Check Valve Drain Tube) | 1 |
| 03***64 | Elbow (90 Degrees) | 1 |
7e-9214 Lines Gp-Fuel Injection
| 00***81 | Tee-Union; (Flared 37-Deg) | 1 |
| 03***49 | Elbow; (90 Degree, 37 Degree Flared) | 3 |
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
7e-9090 Pump Gp-Fuel Injection
| 7C***15 | Plug | 1 |
| 7E***80 | Clamp-Injector | 1 |
| 7E***36 | Injector Group-Fuel | 1 |
8n-7763 Pump Gp-Fuel Priming
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 1 |
| 1H***71 | Seal 20.22 mm(.796 In.)I. D. | 1 |
| 2W***05 | Pump As-Fuel Priming | 1 |
1n-4478 Pump Gp-Fuel Transfer
| 11***96 | Seal-Lip; (Outer) | 1 |
| 11***97 | Seal-Lip; (Inner) | 1 |
| 12***37 | Shaft As-Drive | 1 |
8n-6151 Pump Gp-Fuel Transfer
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
| 1N***78 | Pump Group-Fuel Transfer; (1-Section Gear) | 1 |
| 1N***36 | Coupling-Drive | 1 |
115-9184 Tank Gp-Fuel
| 10***81 | Block | 1 |
| 11***84 | Tank Group-Fuel | 1 |
| 11***41 | Guard | 1 |
8x-9486 Tank Gp-Fuel
| 03***27 | Hose As | 1 |
| 0S***27 | Bolt -114.30 mm(4.50 In.) Long | 2 |
| 1D***17 | Nut-Plate And Angle Assembly To Hydraulic And Fuel Tanks; Nut Plate And Angle Assembly To Hydraulic And Fuel Tanks | 5 |
2g-9000 Valve As-Tank -Fast Fill Fuel
| 2G***00 | Valve As-Tank | 1 |
Hydraulic System
3g-6849 Valve Gp-Relief -Pulled Unit
| 2J***66 | Shim .1270 mm(.005 In.) Thick | 7 |
| 2J***57 | Body-Valve | 1 |
| 2J***89 | Springs | 1 |
9t-5210 Valve Gp-Relief -Rear Brake Oil Cooler
| 6J***80 | Spring | 1 |
| 6K***07 | Seal-O-Ring; (43.69mm Id) | 1 |
| 8B***24 | Shim .81mm(.032in)Thk; .82mm(.032in.)Thk. | 9 |
2a-6864 Block Gp-Hydraulic -Pulled Unit
| 15***72 | Kit-Seal; (Hydraulic Oil Cooler Lines) | 1 |
| 2A***64 | Block Group-Hydraulic; -Pulled Unit Brakes | 1 |
| 2A***54 | Block | 1 |
2a-6516 Drive Gp-Pump
| 2A***16 | Drive Group-Pump; -Auxiliary Hoist-Steering, Transmission-Rear Brake Cooling | 1 |
| 2A***46 | Drive Group-Pump; -Auxiliary Hoist-Steering, Transmission-Rear Brake Cooling | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 4 |
2a-6546 Drive Gp-Pump -Steering, Hoist, Transmission
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 16 |
| 13***97 | Seal-Lip Type | 1 |
| 1H***74 | Dowel (.5" Long) | 2 |
105-4310 Lines Gp-Hydraulic Fan
| 03***33 | Seal-O-Ring; (12.42mm Id) | 4 |
| 06***38 | Seal-O-Ring; (7.65 mm Id) | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
8x-9494 Lines Gp-Hydraulic Oil Cooler
| 00***52 | Seal-O-Ring | 4 |
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 155 |
8x-9496 Lines Gp-Rear Attachment
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 1P***77 | Flange-Half (For Tilt Ports On Valve) | 2 |
| 1P***79 | Flange (Half) | 6 |
6e-2308 Manifold Gp-Hydraulic -Pulled Unit
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4J***33 | Seal Fuel Injection Pump | 1 |
| 6E***29 | Manifold | 1 |
5t-4463 Mounting Gp-Hydraulic Tank
| 10***00 | Deflector | 2 |
| 10***01 | Deflector | 1 |
| 10***04 | Support As | 1 |
5t-0882 Mounting Gp-Hydraulic Tank
| 10***00 | Deflector | 2 |
| 10***01 | Deflector | 1 |
| 10***04 | Support As | 1 |
3t-0259 Pump Gp-Gear
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 1S***74 | Seal-O-Ring | 1 |
| 3T***59 | Pump Group-Gear; -Transmission Charging-Scavenge, Lube | 1 |
6t-6146 Pump Gp-Gear -Front Brake Cooling
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1M***36 | Dowel | 2 |
| 3T***06 | Cover As-Oil Pump | 1 |
6t-6149 Pump Gp-Gear -Tc Scav & Chrg, Park Bk Rel, Front Bk Clg
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 9 |
| 1B***14 | Key-Woodruff | 1 |
3t-0260 Pump Gp-Gear -Xmsn Charging, Scavenge, Lube
| 13***73 | Seal-Lip Type | 1 |
| 16***68 | Seal-O-Ring | 4 |
| 1B***36 | Key-Woodruff | 2 |
6t-6147 Pump Gp-Gear
| 1M***09 | Bearing-Sleeve | 2 |
| 2B***73 | Key-Woodruff | 2 |
| 2D***09 | Seal--To Cover & Plate Bearing Retainers | 4 |
6e-5883 Pump Gp-Gear -Rear Brake Cooling
| 10***17 | Plate | 2 |
| 10***63 | Body As-Rear | 1 |
| 10***64 | Body As-Front | 1 |
2a-6625 Pump Gp-Gear
| 1F***58 | Nut-Full; (1/2-13-Thd)(Air Lines) | 4 |
| 2A***25 | Pump Group-Gear; -Pulled Unit Hydraulic-Rear Brake Cooling | 1 |
| 3D***90 | Stud-Taperlock; (1/2x13x1.97 In Oal) | 4 |
4t-0382 Pump Gp-Piston -Steering
| 0T***19 | Bolt Hose Assembly At | 2 |
| 10***58 | Pin-Guide | 1 |
| 1J***74 | Ring-Retaining | 2 |
6e-1349 Screen Gp-Hydraulic -Tc, Front Brake Cooling
| 2J***56 | Ring-Retaining | 1 |
| 2S***39 | Seal-O-Ring | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
125-5811 Screen Gp-Oil Cooler
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 8 |
| 10***58 | Elbow | 2 |
| 12***11 | Screen Group-Oil Cooler; -Brake | 1 |
8w-4451 Shaft Gp-Pump Drive
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 8 |
| 2K***71 | Locknut; (1-14-Thd) | 1 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 8 |
4t-4147 Tank Gp-Hydraulic & Xmsn -Tc, Hoist, Brake, Xmsn
| 00***28 | Angle | 2 |
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 130 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
8w-4452 Universal Joint Gp-Pump Drive
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 8 |
| 10***87 | Spider And Bearing | 2 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 8 |
4t-7345 Valve Gp-Control -Pulled Unit
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0T***20 | Bolt (1.25 In. Long X .438 In. Dia.) | 2 |
| 2J***36 | Disk,Valve Uoc:Bsv,Bsx | 1 |
105-0170 Valve Gp-Diverter -Tc, Front Brake Cooling
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 2 |
| 06***56 | Seal-O-Ring | 1 |
| 10***75 | Spring | 1 |
9t-7095 Valve Gp-Pump Control -Steering
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 1 |
| 2S***63 | Seal 49.21 mm(1.9375 In.)I.D. | 1 |
| 3G***26 | Shim; 1.524mm(.06in.)Thk | 1 |
Lubrication System
7e-9082 Breather Gp -Crankcase
| 03***31 | Seal-O-Ring | 2 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 8 |
| 2W***72 | Seal-O-Ring; (221.62mm Id) | 2 |
101-0838 Breather Gp -Crankcase
| 03***31 | Seal-O-Ring | 2 |
| 10***38 | Breather Group; -Crankcase | 1 |
| 10***99 | Cover As | 2 |
1n-4764 Filler Gp-Engine Oil
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 3 |
| 11***57 | Bracket | 1 |
2w-0201 Filler Gp-Engine Oil
| 03***37 | Bolt-Shoulder; (1/4-20x1-In) | 1 |
| 10***72 | Hasp | 1 |
| 13***46 | Cap As-Engine Oil Filler | 1 |
2w-0206 Filter Gp-Engine Oil
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 18 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 10 |
100-6014 Fumes Disposal Gp
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
| 10***14 | Fumes Disposal Group | 1 |
2w-0203 Gauge Gp-Oil Level (Dipstick)
| 11***44 | Gauge As-Oil Level | 1 |
| 2W***03 | Gauge Group-Oil Level (Dipstick) | 1 |
| 2W***77 | Tube As-Oil Level; (Gauge Guide) | 1 |
2w-0207 Lines Gp-Engine Oil
| 06***56 | Seal-O-Ring | 4 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 6 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
123-6919 Lines Gp-Fan Drive
| 03***33 | Seal-O-Ring; (12.42mm Id) | 2 |
| 06***38 | Seal-O-Ring; (7.65 mm Id) | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
117-0445 Lines Gp-Prelubrication
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 09***04 | Terminal-Ring; (2-Ga, 3/8-In Screw) | 2 |
109-8081 Lines Gp-Turbocharger Oil
| 03***36 | Tee-Flared | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
7e-5541 Lines Gp-Turbocharger Oil
| 03***36 | Tee-Flared | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
135-8770 Manifold Gp-Control -Fan Drive-Variable Speed
| 13***70 | Manifold Group-Control; -Fan Drive-Variable Speed | 1 |
| 13***71 | Valve Group-Solenoid | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 3 |
8x-8365 Oil Change Gp-High Speed
| 00***43 | Elbow | 1 |
| 03***65 | Elbow (45 Degrees) | 1 |
| 03***34 | Elbow-Flared | 1 |
116-7153 Pump & Motor Gp-Prelubrication
| 11***53 | Pump & Motor Group-Prelubrication | 1 |
| 15***58 | Connector | 1 |
| 15***59 | Connector | 1 |
8n-6152 Pump Gp-Engine Oil -2-Section Gear
| 29***87 | Seal-O-Ring | 1 |
| 4P***38 | Pump Group-Engine Oil; -2-Section Gear | 1 |
| 4S***82 | Bolt 7.25 In. (18.42 cm) Long | 3 |
4p-5638 Pump Gp-Engine Oil -2-Section Gear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 9 |
| 11***49 | Gasket | 1 |
8n-7805 Pump Gp-Scavenge -Front Sump
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
1w-8508 Pump Gp-Scavenge -Front Sump
| 05***79 | Washer; (13.5x44.45x10-mm Thk) | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
144-8267 Pump Gp-Scavenge -Front Sump
| 05***79 | Washer; (13.5x44.45x10-mm Thk) | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
124-2725 Valve & Mtg Gp-Fan Drive
| 12***25 | Valve & Mtg Group-Fan Drive; -Variable Speed | 1 |
| 12***97 | Valve Group-Solenoid | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 3 |
124-3497 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
| 11***03 | Kit-Seal; (Modulating Valve) | 1 |
135-8771 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***03 | Kit-Seal; (Modulating Valve) | 1 |
| 12***74 | Spacer-Special; (16.5x34.42x11.5-mm Thk) | 1 |
Machine Arrangement
137-4161 Conversion Ar-Tractor/Trailer
| 10***27 | Wheel & Brake Ar; -Pulled Unit | 1 |
| 13***78 | Retarder Ar-Automatic | 1 |
| 13***90 | Monitor Ar-Payload | 1 |
Operator Station
249-2969 Adjuster Gp-Seat
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
2a-6502 Air Conditioner & Mounting Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 10***46 | Air Conditioner Group | 1 |
| 1B***04 | Nut-Full | 1 |
3e-7711 Air Conditioner Gp
| 1M***30 | Nut And Lock Assem.; (No. 10-32) | 4 |
| 2G***15 | Bracket | 2 |
| 2L***17 | Screw-Machine; (10-32x7.9-mm) | 2 |
108-4546 Air Conditioner Gp
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 1 |
| 10***46 | Air Conditioner Group | 1 |
| 11***35 | Case As | 1 |
169-5423 Armrest Gp -Rh
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 15***51 | Bracket | 1 |
151-2702 Armrest Gp -Rh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 15***00 | Bracket As | 1 |
8y-5904 Armrest Gp
| 3E***12 | Nut-Square; (3/8-16-Thd) | 1 |
| 6V***87 | Screw-Pan Head; (10-24x1-In) | 4 |
| 8S***03 | Ring-Retaining | 1 |
8x-9490 Cab Ar
| 11***77 | Hose Group-Air; -Gauge-Brake Pressure | 1 |
| 12***39 | Wiring Group-Cab; -Differential Oil Filter/Ems | 1 |
| 2A***80 | Seat Group-Adjustable; -Air-Operator | 1 |
115-9171 Cab Ar
| 11***64 | Panel Group-Instrument; -Keypad, Speedometer, Tach | 1 |
| 11***73 | Wiring Group-Cab; -Vims | 1 |
| 11***71 | Cab Ar | 1 |
115-9173 Cab Gp
| 11***73 | Cab Group | 1 |
| 11***74 | Cab As-Truck | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 3 |
115-9172 Cab Gp
| 10***01 | Cover; (Lh) | 2 |
| 10***38 | Dash As | 1 |
| 11***72 | Cab Group | 1 |
2a-6689 Cab Gp
| 1H***44 | Lockwasher (Bracket To Cab) | 3 |
| 1V***45 | Grommet | 2 |
| 1V***46 | Ring-Snap | 2 |
2a-6688 Cab Gp
| 10***01 | Cover; (Lh) | 2 |
| 10***37 | Plate | 1 |
| 11***93 | Dash As | 1 |
143-2514 Cleanout Gp-Cab
| 14***14 | Cleanout Group-Cab | 1 |
| 15***27 | Gun-Air Jet | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
7n-4297 Compressor Gp-Refrigerant
| 01***11 | Screw; (10-16x0.25-In) | 3 |
| 14***97 | Valve As-Relief; (Refrigerant Compressor) | 1 |
| 1H***71 | Seal 20.22 mm(.796 In.)I. D. | 2 |
2w-0216 Compressor Gp-Refrigerant
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
3e-3768 Compressor Gp-Refrigerant
| 01***11 | Screw; (10-16x0.25-In) | 3 |
| 14***97 | Valve As-Relief; (Refrigerant Compressor) | 1 |
| 1P***56 | Plate | 1 |
4w-4033 Condenser & Mtg Gp-Refrigerant
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 4 |
| 4W***33 | Condenser & Mounting Group | 1 |
| 4W***85 | Plate | 2 |
5t-6716 Control Gp-Hoist -Cab
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 10***72 | Lever; (Bed Control) | 1 |
| 1B***06 | Key-Woodruff | 2 |
5t-6377 Control Gp-Hoist -Chassis-Pulled Unit
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 6 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 2 |
| 1A***52 | Clevis,Rod End Governor And Decelerator Control | 2 |
158-8717 Control Gp-Monitor -Cat Monitoring System
| 15***17 | Control Group-Monitor; -Cat Monitoring System | 1 |
9x-6846 Control Gp-Monitor -Payload
| 10***85 | Battery; (Lithium)(Internal Backup) | 1 |
| 18***78 | Control Group-Payload Electronic | 1 |
| 8C***78 | Seal-O-Ring | 1 |
9x-6847 Display Gp-Payload Monitor -Operator Display
| 8C***81 | Film-Instruction; (Payload Measurement) | 1 |
| 9X***08 | Control Group-Payload Electronic; -Operator Display | 1 |
| 9X***47 | Control Group-Payload Electronic; -Operator Display | 1 |
9x-5308 Display Gp-Payload Monitor -Operator Display
| 5P***66 | Terminal-Ring; (18-Ga To 22-Ga, No. 6 Screw) | 6 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 4 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 4 |
2a-6517 Control Gp-Retarder -Automatic
| 12***16 | Harness As-Cab; (Arc-Cab) | 1 |
| 2A***17 | Control Group-Retarder; -Automatic-Electrical | 1 |
| 2A***21 | Plate | 1 |
135-6568 Control Gp-Retarder -Automatic
| 00***33 | Tee-Pipe | 1 |
| 12***61 | Valve & Mtg Group-Brake; -Automatic Retarder | 1 |
| 13***68 | Control Group-Retarder; -Automatic-Hydraulic | 1 |
2a-6518 Control Gp-Retarder -Automatic
| 2A***18 | Control Group-Retarder; -Automatic | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
| 3E***78 | Valve & Mounting Group; -Automatic Retarder-Retarder Control | 1 |
127-4765 Control Gp-Retarder -Automatic
| 12***61 | Valve & Mtg Group-Brake; -Automatic Retarder | 1 |
| 12***65 | Control Group-Retarder; -Automatic | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
5t-6545 Control Gp-Transmission
| 12***96 | Sensor Group-Position; -Transmission Shift Lever | 1 |
| 3L***40 | Bolt-Hex Socket Head; (10-24x.750in) | 2 |
| 4J***33 | Seal Fuel Injection Pump | 4 |
165-8682 Control Gp-Unprgmed Monitor -Vids/Vims Main Module
| 10***85 | Battery; (Lithium)(Internal Backup) | 1 |
| 13***20 | Film-Identification; (Vids, Vims Main Module) | 1 |
| 16***82 | Control Group-Unprgmed Monitor; -Vids/Vims Main Module | 1 |
226-8720 Cover Gp-Seat Belt
| 22***85 | Cover-Front | 1 |
| 22***86 | Cover As; (Rear) | 1 |
| 22***20 | Cover Group-Seat Belt | 1 |
8x-8090 Door Gp-Cab -Lh
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 4 |
| 10***87 | Escutcheon | 1 |
8w-4170 Door Gp-Cab -Rh
| 12***65 | Handle As; (Rh Door)(Outside) | 1 |
| 17***94 | Seal; (418-cm) | 0 |
| 2G***29 | Hinge | 1 |
2a-6774 Drive Gp-Tachograph
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 2A***74 | Drive Group-Tachograph; -Chassis | 1 |
8y-5874 Extension Gp-Backrest -Cloth
| 8Y***74 | Extension Group-Backrest; Backrest Extension Group | 1 |
| 8Y***77 | Pan As-Extension | 1 |
| 8Y***43 | Cushion Kit; (Consists Of Fastener, Cushion Assem.) | 1 |
4w-0483 Gauge Gp-Coolant Temperature
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
| 4W***83 | Gauge Group-Coolant Temperature; (Eng. Coolant)(24 V) | 1 |
155-6002 Gauge Gp-Oil Temperature -24 Volt
| 15***02 | Gauge Group-Oil Temperature; -24 Volt | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
4w-2067 Gauge Gp-Oil Temperature
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
| 4W***67 | Gauge Group-Oil Temperature | 1 |
2a-6577 Guard Gp-Window
| 2A***32 | Guard As | 1 |
| 2A***77 | Guard Group-Window | 1 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 7 |
5d-6998 Horn Gp-Air -Chassis
| 15***87 | Cover | 2 |
| 2G***64 | Kit-Diaphragm; (Air Horn) | 2 |
| 4B***75 | Washer (1.75 In. Outside Diameter) | 1 |
5t-0857 Horn Gp-Air -Cab
| 3D***87 | Fitting; - Use When Relocating Air Override Valve To R.H. Side Panel If Equipped With Attachment Parking Brake Control | 1 |
| 3D***43 | Valve As-Horn | 1 |
| 4B***56 | Screw-Machine; (1/4-20x0.75-In) | 2 |
8w-7396 Horn Gp-Air -Chassis
| 2H***23 | Grommet (1.375" Inside Diameter) | 1 |
| 2H***24 | Grommet (.875" Inside Diameter) | 1 |
| 4M***80 | Nut-Plated Full | 1 |
108-4588 Housing Gp-Seat Suspension
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
8y-6862 Housing Gp-Seat Suspension
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
| 8Y***45 | Kit-Suspension Knob; (Height Adjustment)(Suspension Seat) | 1 |
106-1773 Kit-Conversion-Seat
| 10***73 | Kit-Conversion-Seat | 1 |
2a-6514 Lines Gp-Air Conditioner
| 10***89 | Accumulator-Air Conditioner, . Gear; Ring | 1 |
| 10***39 | Bracket | 1 |
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 1 |
5t-3218 Lines Gp-Heater
| 00***89 | Valve As-Drain | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 2 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 10 |
8x-2803 Lines Gp-Window Washer -Window-Front Window
| 14***95 | Hose; (650-cm Each) | 0 |
| 1P***78 | Clamp; (Hose) | 1 |
| 2V***16 | Clip; (9.52mm Id) | 4 |
6v-6643 Module Gp-Message Center -Vims
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
| 6V***43 | Module Group-Message Center; -Vims | 1 |
115-6494 Monitor Ar
| 11***94 | Monitor Ar | 1 |
| 2A***13 | Wiring Group-Chassis; -Chassis (Ems) | 1 |
| 2A***25 | Wiring Group-Chassis; -Tractor | 1 |
102-0226 Monitor Ar-Payload
| 10***26 | Monitor Ar-Payload | 1 |
| 2A***95 | Sensor & Mounting Group; -Payload Monitor | 1 |
| 2A***03 | Wiring Group-Cab; -Payload/Ems | 1 |
136-7190 Monitor Ar-Payload
| 11***87 | Lamp Group-Signal; -Payload-Cab | 1 |
| 11***88 | Lamp Group-Payload Signal; -Rh Platform | 1 |
| 13***90 | Monitor Ar-Payload | 1 |
8x-2824 Motor Gp-Window Wiper -Front
| 2L***67 | Locknut; (3/8-24-Thd) | 1 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 1 |
| 8X***52 | Kit-Wiper Repair; (Window) | 1 |
2a-6727 Mounting Gp-Cab
| 1F***64 | Bolt; (1-14x4-In) | 22 |
| 1K***18 | Bolt | 6 |
| 1K***20 | Bolt; (1-1/4-7x9.5-In) | 6 |
143-2252 Odometer Gp -Mph
| 12***31 | Plate As | 1 |
| 14***52 | Odometer Group; -Mph | 1 |
| 5B***39 | Spacer; (0.562x1x0.75-In Thk) | 2 |
143-2517 Odometer Gp -Km/H
| 12***31 | Plate As | 1 |
| 14***14 | Odometer As; (Tire Size: 44-80r57/36r51) | 1 |
| 14***17 | Odometer Group; -Km/H | 1 |
8y-5909 Pan Gp-Backrest -Back
| 2F***06 | Screw-Machine (6-32x. 25in); (6-32x0.25-In) | 1 |
| 3E***35 | Clip | 1 |
| 3E***36 | Stud-Ball | 1 |
226-7674 Pan Gp-Backrest
| 13***43 | Plate As-Lumbar | 1 |
| 16***83 | Knob-Lumbar | 1 |
| 17***52 | Retainer | 1 |
108-8421 Pan Gp-Backrest -Lumbar
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
| 10***23 | Shaft As-Lumbar | 1 |
| 10***24 | Pan-Lumbar | 1 |
8y-5992 Pan Gp-Seat
| 3K***97 | Pin 3.18 mm(.125 In.) Diameter | 4 |
| 6V***56 | Ring-Retaining | 2 |
| 8Y***92 | Pan As-Seat; (Bottom) | 1 |
110-2238 Panel Gp-Instrument
| 09***37 | Spacer; (12-mm Thk) | 2 |
| 11***38 | Panel Group-Instrument; -Speedometer, Tach | 1 |
| 11***08 | Film-Dash; (Instrument Panel) | 1 |
2a-6463 Panel Gp-Instrument
| 09***37 | Spacer; (12-mm Thk) | 2 |
| 1P***10 | Tape (Order By The Meter) (Use As | 0 |
| 2A***17 | Plate As | 1 |
114-9462 Panel Gp-Instrument -Keypad
| 10***66 | Bezel | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***23 | Plate | 1 |
2a-6503 Panel Gp-Instrument
| 11***38 | Panel Group-Instrument; -Speedometer, Tach | 1 |
| 2A***03 | Panel Group-Instrument; -Speedometer, Tach | 1 |
| 2G***51 | Socket As (Each Includes:) | 9 |
114-9464 Panel Gp-Instrument
| 10***77 | Film-Instruction; (Arc) | 1 |
| 11***62 | Panel Group-Instrument; -Keypad | 1 |
| 11***63 | Panel Group-Instrument; -Speed/Tachometer | 1 |
114-9463 Panel Gp-Instrument -Speed/Tachometer
| 10***67 | Bezel | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***76 | Film-Dash; (Instrument Panel) | 1 |
8x-7946 Pedal Gp-Governor
| 1M***37 | Spring | 1 |
| 2K***67 | Pin-Spring | 1 |
| 2N***56 | Screw-Machine; (10-24x1.5-In) | 2 |
8x-9483 Platform Gp -Chassis
| 14***55 | Support As | 1 |
| 14***56 | Support As | 1 |
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 48 |
4p-3663 Platform Gp -Engine
| 4P***63 | Platform Group; -Engine | 1 |
| 5S***79 | Hex Head Capscrew, 3/8 Nc X 7/8 In. (22 mm) | 12 |
| 7X***72 | Washer-Hard; (10.2x25.5x2.5-mm Thk) | 12 |
5t-3220 Platform Gp -Rh
| 1A***58 | Bolt 1.75 In. (44.45 mm) Long | 4 |
| 1A***63 | Bolt, Hex, Hd., 3/4"-10 N.C. X 2 1/2" | 8 |
| 29***57 | Handrail As | 1 |
210-2270 Recliner Gp-Seat
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
8y-3792 Seat Belt Gp -Retractable
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 1 |
| 8Y***92 | Seat Belt Group; -Retractable-Operator | 1 |
8y-6857 Seat Belt Gp -Operator
| 0T***44 | Bolt (1.25" Long) | 1 |
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 2 |
| 7X***10 | Washer-Hard; (15.5x29x3-mm Thk) | 2 |
156-1149 Seat Belt Gp -Operator
| 15***49 | Seat Belt Group; -Retractable | 1 |
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 1 |
| 7X***10 | Washer-Hard; (15.5x29x3-mm Thk) | 1 |
220-0131 Seat Belt Gp -Retractable
| 17***37 | Spacer; (11.7x19.8x20.3-mm Thk)(Lh Seat Side) | 1 |
| 18***59 | Screw-Pan Head; (7/16-20x1.75-In)(Lh Seat Side) | 1 |
| 18***60 | Screw-Pan Head; (7/16-20x1.25-In)(Rh Seat Side) | 1 |
122-4617 Seat Belt Gp -Retractable
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 4D***32 | Locknut (7/16-20 Thd) | 1 |
226-7677 Seat Gp -Cloth
| 09***43 | Pin-Cotter | 2 |
| 14***25 | Spring | 1 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
8y-5986 Seat Gp -Cloth, Lumbar
| 06***03 | Shim (.060mm Thk); (1.52-mm Thk) | 4 |
| 09***78 | Pin-Spring | 1 |
| 1C***69 | Bolt (1/2 In. Long 5/16 In. Dia.); Support Assembly To Heater Group | 2 |
252-9713 Seat Gp
| 16***89 | Block-Slider | 4 |
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
8w-7235 Seat Gp -Contour Mechanical
| 03***41 | Block-Adjustment | 2 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 10 |
| 5S***79 | Hex Head Capscrew, 3/8 Nc X 7/8 In. (22 mm) | 10 |
138-8344 Seat Gp
| 06***03 | Shim (.060mm Thk); (1.52-mm Thk) | 4 |
| 09***78 | Pin-Spring | 1 |
| 09***14 | Pin, Clevis | 1 |
252-9714 Seat Gp
| 16***23 | Armrest Group; -Rh | 1 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 3 |
| 22***31 | Seat Belt Group; -Retractable-Operator | 1 |
8y-6907 Seat Gp
| 11***54 | Kit-Cover | 1 |
| 11***55 | Kit-Lumbar Valve; (Seat Frame As) | 1 |
| 11***56 | Kit-Spring Handle | 1 |
156-4388 Seat Gp
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 13***44 | Seat Group | 1 |
| 15***02 | Armrest Group; -Rh | 1 |
138-4021 Seat Gp
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 13***21 | Seat Group | 1 |
| 13***44 | Seat Group | 1 |
253-5207 Seat Gp-Adjustable
| 14***85 | Support As | 1 |
| 1F***50 | Nut Rops Support | 4 |
| 25***13 | Seat Group | 1 |
137-0078 Seat Gp-Adjustable -Operator-Comfort Air
| 03***41 | Block-Adjustment | 2 |
| 13***42 | Support As | 1 |
| 13***78 | Seat Group-Adjustable; -Operator-Comfort Air | 1 |
125-2230 Seat Gp-Adjustable -Operator-Air
| 12***09 | Support As | 1 |
| 12***30 | Seat Group-Adjustable; -Operator-Air | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
2a-6380 Seat Gp-Adjustable -Air-Operator
| 2A***80 | Seat Group-Adjustable; -Air-Operator | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 6 |
5t-6543 Seat Gp-Companion
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 4 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 2 |
8w-2967 Seat Gp-Companion
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 1B***04 | Nut-Full | 1 |
| 1H***57 | Screw-Machine; (5/16-18x0.8-In) | 8 |
8y-6137 Seat Gp-Suspension
| 10***87 | Suspension Group-Seat; -Adjustable | 1 |
| 14***45 | Kit-Slider Block; (Suspension Seat) | 1 |
| 4F***79 | Bolt Clip To Tube Assembly (Aftercooler Radiator Inlet) | 1 |
8x-2822 Shaft Gp-Wiper
| 06***37 | Bushing-Linkage | 1 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 1 |
| 2G***22 | Bearing | 1 |
155-6004 Speedometer Gp
| 15***04 | Speedometer Group | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 4 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 4 |
3t-3408 Speedometer Gp
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 3T***08 | Speedometer Group; -Standard | 1 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
5t-7629 Control Gp-Steering
| 00***21 | Nut; (13/16-20-Thd) | 1 |
| 06***45 | Bearing-Tube | 1 |
| 10***70 | Spacer | 1 |
221-1206 Support Gp-Seat Belt
| 22***06 | Support Group-Seat Belt; -Cloth | 1 |
| 22***37 | Support As | 1 |
| 22***38 | Support As | 1 |
108-4587 Suspension Gp-Seat
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
199-5727 Suspension Gp-Seat -Air
| 10***03 | Fastener | 26 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
| 14***26 | Film-Instruction; (Seat Adjustment) | 1 |
119-7028 Suspension Gp-Seat -Air
| 10***17 | Bumper | 2 |
| 11***28 | Suspension Group-Seat; -Air | 1 |
| 12***57 | Shaft | 2 |
150-7719 Suspension Gp-Seat
| 10***17 | Bumper | 2 |
| 12***57 | Shaft | 2 |
| 12***28 | Kit-Roller; (Incls Parts Marked S) | 1 |
8y-5982 Suspension Gp-Seat -Variable
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
| 10***96 | Kit-Suspension Shaft; ((Includes Bearings) | 1 |
2a-6772 Tachograph Ar
| 2A***72 | Tachograph Ar | 1 |
| 2A***74 | Drive Group-Tachograph; -Chassis | 1 |
| 2A***76 | Tachograph Group; -Cab | 1 |
2a-6776 Tachograph Gp -Cab
| 2A***76 | Tachograph Group; -Cab | 1 |
| 5T***75 | Tachograph Group | 1 |
| 7N***29 | Connector To Cab Wall | 1 |
5t-9075 Tachograph Gp
| 1L***12 | Adapter-Tachometer | 1 |
| 1S***36 | Flexible Shaft 66 Inches | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
155-6005 Tachometer Gp
| 15***05 | Tachometer Group | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 4 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 4 |
8c-5471 Tachometer Gp
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 4B***24 | Washer; (3.9x9.6x1.2-mm Thk) | 3 |
| 6V***68 | Nut (6-32)Thd; (No. 6-32) | 3 |
3d-9943 Valve As-Horn
| 3B***09 | Pin Governor And Decelerator Control | 1 |
| 3D***43 | Valve As-Horn | 1 |
| 4D***33 | Spring | 1 |
143-2404 Valve Gp-Air Control -Secondary Brake
| 14***04 | Valve Group-Air Control; -Secondary Brake | 1 |
| 14***26 | Adapter | 1 |
| 2G***95 | Piston | 1 |
5t-8174 Valve Gp-Air Control -Window Wiper
| 5T***23 | Knob; (Window Wiper) | 1 |
| 5T***74 | Valve Group-Air Control; -Window Wiper | 1 |
143-2405 Valve Gp-Air Control -Manual Retarder
| 14***05 | Valve Group-Air Control; -Manual Retarder | 1 |
| 14***26 | Adapter | 1 |
| 1S***99 | Graduating Spring | 1 |
115-6474 Vims Ar
| 11***71 | Wiring Group-Engine; -Vims | 1 |
| 11***74 | Vims Ar | 1 |
| 11***76 | Wiring Group-Chassis; -Chassis | 1 |
5t-6548 Visor Gp-Cab
| 1D***76 | Bolt-Carriage; (3/8-16x0.875-In)(Rh & Lh Plates) | 2 |
| 3K***60 | Nut, Hex (3/8 - 16 Nc, Plastic Insert) | 1 |
| 5T***48 | Visor Group-Cab | 1 |
2a-6728 Washer Gp-Window -Rear
| 10***38 | Plate As | 1 |
| 2A***28 | Washer Group-Window; -Rear | 1 |
| 2A***32 | Reservoir As | 1 |
5t-1342 Washer Gp-Window -Front Window
| 2D***35 | Grommet 20.64 mm(.813 In.)O.D. | 2 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 4 |
| 5P***74 | Tuber (R.H. Front 1.75 M(68.88 In.) | 0 |
2a-6685 Washer Gp-Window
| 1P***78 | Clamp; (Hose) | 4 |
| 2A***85 | Washer Group-Window | 1 |
| 4D***94 | Clip-- Compressor Clutch Wire To Compressor Body | 3 |
8w-6212 Window Gp -Door, Rh
| 2G***18 | Nut | 2 |
| 5K***05 | Nut-Barrel; (6-32-Thd) | 2 |
| 5P***25 | Seal (Use As Required) 5.4m | 0 |
8w-6211 Window Gp-Cab -Door, Rh
| 2V***31 | Catch | 1 |
| 3V***96 | Lock As-Window | 1 |
| 4V***43 | Stop | 1 |
5t-6550 Wiper Gp-Window -Front
| 11***44 | Valve Group-Air Control; (Window Wiper & Washer) | 1 |
| 14***48 | Motor Group-Window Wiper; (Air) | 1 |
| 2A***26 | Screw-Machine | 1 |
2a-6549 Wiper Gp-Window -Rear
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 10***39 | Harness As | 1 |
| 10***40 | Cover | 1 |
3t-7068 Motor Gp-Window Wiper -Rear
| 3C***84 | Screw-Machine; (M5x0.8 Bg Thd) | 4 |
| 3T***59 | Bracket | 1 |
| 3T***68 | Wiper Group-Windshield; -Rear | 1 |
Power Train
9w-4119 Actuator Gp-Rotary -Transmission
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 2 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
| 3E***54 | Ball | 1 |
6y-5644 Case Gp-Transmission
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 18 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 21 |
| 1D***17 | Nut-Plate And Angle Assembly To Hydraulic And Fuel Tanks; Nut Plate And Angle Assembly To Hydraulic And Fuel Tanks | 10 |
8w-5078 Control Gp-Traction
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 3 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 3 |
3t-0288 Control Gp-Transmission Hyd
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
7t-4997 Cover Gp-Shipping -Transmission-Transmission Control
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 8 |
| 0S***83 | Bolt 31.75 mm(1.25 In.) Long | 2 |
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 4 |
8w-9545 Differential & Bevel Gear Gp
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 12 |
| 2B***73 | Bolt-Special; (3/4-16x3.15-In) | 16 |
125-6181 Differential & Bevel Gear Gp
| 09***72 | Fitting-Straight | 1 |
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 1 |
104-5349 Differential & Bevel Gear Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 12 |
8w-9544 Differential Gp
| 10***58 | Nut; (2-1/8-Thd) | 4 |
| 12***02 | Housing As-Differential | 1 |
| 13***45 | Housing As-Differential | 1 |
8x-9488 Drive Gp-Final -Chassis
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 24 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 6 |
| 10***32 | Hub | 2 |
113-4329 Drive Gp-Final
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 16 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 6 |
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 16 |
8w-4448 Filter & Lines Gp-Torque Conv
| 03***45 | Connector | 1 |
| 06***93 | Bushing-Reducer; (1/2-14 Nptf) | 1 |
| 06***21 | Tee-Flared | 1 |
138-7377 Filter & Lines Gp-Torque Conv
| 03***45 | Connector | 1 |
| 06***93 | Bushing-Reducer; (1/2-14 Nptf) | 1 |
| 06***21 | Tee-Flared | 1 |
6p-4603 Filter Gp-Oil -Park Brake Release, Xmsn-Parking Brake Release-Rear Brakes
| 13***75 | Filter Element As-Oil; (Ultra High Efficiency)(Cleanout/High Efficiency) | 1 |
| 1R***19 | Filter Element As-Oil; (Standard Efficiency)(Power Train) | 1 |
| 2J***56 | Ring-Retaining | 1 |
4t-4760 Filter Gp-Oil -Torque Converter Charging
| 13***76 | Filter Element As-Oil; (Ultra High Efficiency)(Ultra High Efficiency) | 2 |
| 1H***00 | Pin--To Compression Release Shaft | 2 |
| 1R***41 | Filter Element As-Oil; (Standard Efficiency) | 2 |
115-2970 Drive Gp-Final
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 3 |
| 10***32 | Hub | 1 |
7i-5683 Drive Gp-Final
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 12 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 3 |
| 10***32 | Hub | 1 |
6y-5643 Gear Gp-Transfer
| 0S***02 | Bolt; (5/8-18x3.5-In) | 1 |
| 12***36 | Race-Bearing; Bearing-Race | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 16 |
118-7288 Housing As-Rear Axle
| 11***88 | Housing As-Rear Axle | 1 |
| 13***32 | Tube | 2 |
| 1F***50 | Nut Rops Support | 8 |
118-3810 Housing Gp-Rear Axle
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 8 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
6g-9380 Housing Gp-Rear Axle
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
8w-4447 Lines Gp-Transmission Oil
| 0L***29 | Bolt- 7.63 cm(3 In.) Long - Location "H" | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 14 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 5 |
5t-6639 Neutralizer Gp-Transmission
| 01***08 | Screw-Machine | 2 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
| 1B***06 | Key-Woodruff | 1 |
3t-0036 Planetary Gp-Transmission
| 03***37 | Bolt-Self Locking; 3.81cm(1.5 In.)Long | 12 |
| 06***16 | Ring-Retaining | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 24 |
8x-9495 Power Train Ar
| 10***49 | Differential & Bevel Gear Group | 1 |
| 11***29 | Drive Group-Final | 1 |
| 11***57 | Torque Converter Group | 1 |
2a-6862 Rim Gp-Demountable -Pulled Unit
| 03***57 | Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer | 20 |
| 13***79 | Rim Group-Demountable | 1 |
| 17***82 | Extension | 2 |
138-7579 Rim Gp-Demountable
| 10***17 | Band-Bead Seat | 1 |
| 13***57 | Rim As | 1 |
| 13***79 | Rim Group-Demountable | 1 |
2a-6730 Rim Gp-Demountable
| 03***57 | Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer | 20 |
| 13***79 | Rim Group-Demountable | 6 |
| 1D***66 | Bolt Bracket Assembly To Yoke | 8 |
107-7504 Rim Gp-Single
| 10***04 | Rim Group-Single | 1 |
| 13***79 | Rim Group-Demountable | 1 |
| 2D***08 | Grommmet | 1 |
7t-4554 Screen Gp-Magnetic -Transmission
| 1A***69 | Bolt (R.H. Side Flywheel Housing) | 2 |
| 3D***71 | Stud-Taperlock; (3/8-16x1.5-In)(3/8 In.Nc X 1 1/2) | 8 |
| 3S***39 | Cover-Top | 2 |
8x-0498 Shaft Gp-Drive
| 2N***86 | Bolt-12 Point Head | 8 |
| 8X***73 | Slip Joint Group | 1 |
| 8X***98 | Shaft Group-Drive; -Main | 1 |
8x-0473 Slip Joint Gp
| 2N***86 | Bolt-12 Point Head | 8 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
| 5T***82 | Kit-Seal | 1 |
1t-2005 Torque Converter Gp
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 24 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
1t-1830 Torque Converter Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 12 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 24 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
8e-9000 Torque Converter Gp
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 16 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 1A***58 | Bolt 1.75 In. (44.45 mm) Long | 11 |
117-3357 Torque Converter Gp
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 16 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 11***57 | Torque Converter Group | 1 |
6y-3944 Torque Converter Gp
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 16 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 1A***58 | Bolt 1.75 In. (44.45 mm) Long | 11 |
1t-1954 Torque Converter Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 12 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 24 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
3t-0034 Transmission Ar
| 3T***29 | Sensor Group-Speed; -Transmission Output | 1 |
| 3T***34 | Transmission Ar | 1 |
| 3T***36 | Planetary Group | 1 |
230-4111 Universal Joint Gp
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 8 |
| 10***87 | Spider And Bearing | 2 |
| 23***11 | Universal Joint Group | 1 |
230-4110 Universal Joint Gp
| 23***10 | Universal Joint Group | 1 |
| 23***11 | Universal Joint Group | 1 |
| 8W***52 | Universal Joint Group-Pump Drive | 1 |
3t-0289 Valve Gp-Transmission Control
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 1 |
| 1D***41 | Bolt 3.00 In.(7.62 cm) Long | 12 |
| 1F***11 | Bolt 3.50 In. (8.89 cm) Long | 1 |
2p-2859 Valve Gp-Relief -Transmission
| 1P***20 | Spring (Outer) | 1 |
| 1S***43 | Spring (Inner) | 1 |
| 2K***94 | Pin-Spring; (7.94x76.2-mm) | 1 |
6y-7906 Valve Gp-Lockup Clutch & Sync -Torque Converter
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
| 1D***40 | Bolt,Machine Fuel Filter Mounting | 4 |
| 1S***50 | Dowel | 2 |
8e-6146 Valve Gp-Lockup Clutch & Sync -Torque Converter
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
| 1D***40 | Bolt,Machine Fuel Filter Mounting | 4 |
| 1U***76 | Connector | 1 |
6t-3340 Valve Gp-Lube Relief -Xmsn Oil Return
| 3J***93 | Spring | 1 |
| 6T***40 | Valve Group-Lube Relief; -Transmission Hydraulic Control | 1 |
| 7M***85 | Seal,Adapter,Motor Part Of Kit P/N 5r***29 | 1 |
6y-4257 Valve Gp-Pressure Control -Transmission
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 1 |
| 16***78 | Body-Load Piston | 7 |
| 20***18 | Plug As-Orifice | 2 |
9u-9716 Valve Gp-Relay -Lockup Clutch
| 2P***00 | Spring (Outer) | 1 |
| 2R***06 | Connector Valve Assembly To; Connector- Tube Assembly To Logic Valve | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
6i-9533 Valve Gp-Relay -Lockup Clutch
| 6I***33 | Valve Group-Relay; -Lockup Clutch | 1 |
| 7X***20 | Valve Group-Solenoid; (Synchronization) | 1 |
| 9U***16 | Valve Group-Relay; -Lockup Clutch | 1 |
3p-0349 Valve Gp-Relief
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1L***62 | Ring-Retaining | 1 |
| 2P***38 | Spool Assembly, Including:- | 1 |
3p-0348 Valve Gp-Relief
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1L***62 | Ring-Retaining | 1 |
| 2P***38 | Spool Assembly, Including:- | 1 |
3t-0290 Valve Gp-Selector & Press Cont -Transmission
| 03***30 | Bolt-Self Locking; (5/16unc X 3/4) | 1 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 2 |
| 12***33 | Spring As | 2 |
7x-1120 Valve Gp-Solenoid
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 10***70 | Locknut; (1/4-20-Thd) | 1 |
| 4B***76 | Washer Generator Line Leads (Use As Required) | 1 |
107-8238 Valve Gp-Solenoid
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 10***38 | Valve Group-Solenoid | 1 |
| 10***11 | Cartridge As | 1 |
3t-0062 Valve Gp-Solenoid
| 11***03 | Seal-O-Ring | 1 |
| 13***34 | Screen As; (Traction Control Valve) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
9g-9988 Valve Gp-Solenoid
| 12***48 | Kit-Seal; (Solenoid Valve) | 0 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
| 16***43 | Washer-Identification; (16.8x38.1x.5mm Thk) | 1 |
9g-9208 Valve Gp-Traction Control -Antispin
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 10 |
102-0227 Wheel & Brake Ar -Pulled Unit
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 24 |
| 10***44 | Plate | 1 |
| 10***45 | Plate | 1 |
142-5136 Wheel Gp-Rear -Pulled Unit
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 3 |
| 12***24 | Retainer-Seal | 1 |
8x-9489 Wheel Gp-Rear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
| 10***40 | Retainer | 2 |
| 10***12 | Pin-Retaining | 4 |
2a-6631 Wheel Gp-Rear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 3 |
| 10***12 | Pin-Retaining | 2 |
Service Equipment And Supplies
9g-9288 Cap Gp-Protection -Transmission Tank Fill Cap
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 2J***61 | Ring-Retaining | 1 |
5t-6942 Cap Gp-Protection
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 2J***61 | Ring-Retaining | 1 |
143-2245 Chock Gp-Wheel
| 14***45 | Chock Group-Wheel | 1 |
| 15***97 | Chock-Wheel | 2 |
| 15***01 | Bracket As | 1 |
6g-8390 Protection Gp-Vandalism -Tc, Hoist, Brake
| 11***81 | Cover-Hydraulic Cap | 1 |
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 1M***49 | Ring (5.313" Dia.) | 1 |
102-9083 Film Gp
| 10***25 | Film-Stripe; (Caterpillar) | 1 |
| 10***26 | Film-Stripe; (Cat)(Lh) | 1 |
| 10***27 | Film-Stripe; (Cat)(Rh) | 1 |
109-5895 Film-Instruction
| 10***95 | Film-Instruction | 1 |
3e-9627 Plate & Film Gp
| 10***40 | Film-Warning; (Cable Connection) | 1 |
| 10***41 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
| 11***65 | Film-Information; (Engine Oil) | 1 |
117-1166 Plate & Film Gp
| 10***12 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***35 | Film-Information; (Transmission Control)(Display Modes) | 1 |
| 10***13 | Film-Instruction; (Automatic Retarder Control) | 1 |
117-1162 Plate & Film Gp
| 10***14 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***37 | Film-Information; (Transmission Control)(Display Modes) | 1 |
| 10***15 | Film-Instruction; (Automatic Retarder Control) | 1 |
3e-9626 Plate & Film Gp
| 10***39 | Film-Warning; (Cable Connection) | 1 |
| 10***40 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
| 11***62 | Film-Information; (Engine Oil) | 1 |
3e-9629 Plate & Film Gp
| 10***45 | Film-Warning; (Cable Connection) | 1 |
| 10***46 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
| 11***67 | Film-Information; (Engine Oil) | 1 |
102-9086 Plate & Film Gp
| 10***43 | Film-Warning; (Cable Connection) | 1 |
| 10***86 | Plate & Film Group | 1 |
| 10***44 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
117-1161 Plate & Film Gp
| 10***18 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***41 | Film-Information; (Transmission Control)(Display Modes) | 1 |
| 10***19 | Film-Instruction; (Automatic Retarder Control) | 1 |
103-0809 Plate & Film Gp
| 10***74 | Plate-Instruction; (Grease) | 2 |
| 10***23 | Film-Instruction; (Hydraulic Accumulator) | 4 |
| 10***46 | Film-Warning; (Cable Connection) | 1 |
3e-9618 Plate & Film Gp
| 10***14 | Plate-Warning-Rops/Fops | 0 |
| 10***35 | Film-Warning; (Cable Connection) | 1 |
| 10***83 | Film Group | 1 |
117-1168 Plate & Film Gp
| 10***15 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***38 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***16 | Film-Instruction; (Automatic Retarder Control) | 1 |
117-1164 Plate & Film Gp
| 10***16 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***39 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***17 | Film-Instruction; (Automatic Retarder Control) | 1 |
117-1069 Plate & Film Gp -Cab
| 11***92 | Plate-Instruction; (Air Conditioner) | 1 |
| 11***69 | Plate & Film Group; -Cab | 1 |
117-1157 Plate & Film Gp
| 10***10 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***33 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***11 | Film-Instruction; (Automatic Retarder Control)(Arc) | 1 |
117-1160 Plate & Film Gp
| 10***20 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***42 | Film-Information; (Transmission Control) | 1 |
| 10***21 | Film-Instruction; (Automatic Retarder Control) | 1 |
3e-9623 Plate & Film Gp
| 10***36 | Film-Warning; (Cable Connection) | 1 |
| 10***37 | Film-Warning; (Electrical Shock Hazard) | 5 |
| 11***61 | Film-Information; (Engine Oil) | 1 |
3e-9624 Plate & Film Gp
| 10***37 | Film-Warning; (Jumper Cable Use) | 1 |
| 10***38 | Film-Warning; (Unit Injector) | 5 |
| 11***68 | Film-Information; (Engine Oil) | 1 |
117-1167 Plate & Film Gp
| 10***19 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***66 | Film-Information; (Transmission Control)(Display Modes) | 1 |
| 10***20 | Film-Instruction; (Automatic Retarder Control) | 1 |
117-1163 Plate & Film Gp
| 10***13 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***36 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***14 | Film-Instruction; (Automatic Retarder Control) | 1 |
102-9084 Plate & Film Gp
| 10***41 | Film-Warning; (Cable Connection) | 1 |
| 10***84 | Plate & Film Group | 1 |
| 10***42 | Film-Warning; (Elec Shock Hazard, Danish) | 5 |
102-9085 Plate & Film Gp
| 10***42 | Film-Warning; (Cable Connection) | 1 |
| 10***85 | Plate & Film Group | 1 |
| 10***43 | Film-Warning; (Unit Injector) | 5 |
3e-9628 Plate & Film Gp
| 10***28 | Film-Instruction; (Hydraulic Accumulator)(Japanese) | 4 |
| 10***44 | Film-Warning; (Cable Connection) | 1 |
| 10***45 | Film-Warning; (Unit Injector) | 5 |
117-1159 Plate & Film Gp
| 10***11 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***34 | Film-Information; (Transmission Control)(Display Modes) | 1 |
| 10***60 | Film-Instruction; (Prelubrication Pump) | 1 |
117-1165 Plate & Film Gp
| 10***17 | Plate-Warning-Rops/Fops; (No Weld/No Drill) | 1 |
| 10***40 | Film-Information; (Transmission Control)(Transmission Control) | 1 |
| 10***18 | Film-Instruction; (Automatic Retarder Control) | 1 |
3e-9625 Plate & Film Gp
| 10***38 | Film-Warning; (Cable Connection) | 1 |
| 10***39 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 5 |
| 11***66 | Film-Information; (Engine Oil) | 1 |
3e-9622 Plate & Film Gp
| 10***14 | Plate-Warning-Rops/Fops | 1 |
| 10***35 | Film-Warning; (Cable Connection) | 1 |
| 10***08 | Film-Information; (Engine Oil)(Install On Oil Filter Cap) | 1 |
Steering System
5t-0910 Accumulator Gp-Hydraulic
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 1 |
| 0S***92 | Bolt--Cover To Flywheel Housing | 8 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
9t-4785 Accumulator Gp-Steering -Charged
| 14***99 | Kit-Repair; (Accumulator Bladder)(Steering) | 1 |
| 16***05 | Ring | 1 |
| 16***06 | Spacer; (80x101.6x7.2-mm Thk) | 2 |
156-8273 Accumulator Gp-Steering -Uncharged
| 15***73 | Accumulator Group-Steering; -Uncharged | 1 |
| 5P***79 | Tag-Notice; (Cylinder Pressure) | 1 |
| 9T***85 | Accumulator Group-Bladder; -Charged | 1 |
8x-9493 Cylinder & Mtg Gp-Steering
| 3J***99 | Self Locking Nut; (2 1/4-12) | 4 |
| 5T***03 | Plug | 4 |
| 5T***67 | Ring-Retaining | 4 |
6e-5857 Cylinder Gp-Steering
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
| 16***63 | Seal-Wiper | 1 |
1u-8331 Fitting Gp-Quick Disconnect
| 1U***28 | Fitting; (Quick Disconnect, Male) | 1 |
| 1U***29 | Cap-Dust; (Steering Tank) | 1 |
| 1U***31 | Fitting Group-Quick Disconnect | 1 |
8w-4449 Lines Gp-Steering
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 5 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
6g-9260 Link Gp-Steering
| 0S***56 | Bolt 4 1/4 In. (108 mm) --Front Support Assembly To Frame | 2 |
| 13***60 | Lock | 1 |
| 13***67 | Arm-Center | 1 |
2a-7217 Link Gp-Steering
| 2A***17 | Link Group-Steering | 1 |
| 2A***18 | Socket As; (Rh Threads) | 1 |
| 2A***19 | Socket As; (Lh Threads) | 1 |
5t-0912 Pump & Mtg Gp-Steering
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 2 |
| 4T***82 | Pump Group-Piston; -Steering | 1 |
| 5F***99 | Packing,Preformed Cover Mtg; Part Of Kit P/N 5r***25 Part Of Kit P/N 8s***57 | 1 |
9t-4247 Pump Gp-Metering -Hmu-Steering
| 05***12 | Ring-Retaining; (Internal) | 1 |
| 14***67 | Bolt-12 Point Head | 7 |
| 25***11 | Kit-Seal | 1 |
6e-6296 Tank & Filter Gp-Steering
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 8 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 46 |
| 13***76 | Filter Element As-Oil; (Ultra High Efficiency)(Ultra High Efficiency) | 1 |
5t-0870 Tank Gp-Hydraulic
| 1U***31 | Fitting Group-Quick Disconnect | 1 |
| 3B***31 | Elbow, 45 Degrees 1/2 Npt Adapter - Low Power Take-Off | 1 |
| 5C***65 | Bolt-Plt; (1/2unc X 1 1/8) | 9 |
6e-3528 Valve Gp-Breaker Relief -Steering Tank
| 1U***67 | Kit-Seal; (Breaker Relief Valve)(Hydraulic Tank) | 1 |
| 2S***63 | Seal 49.21 mm(1.9375 In.)I.D. | 2 |
| 5P***32 | Ring-Retaining; (23.47mm Id) | 1 |
108-2184 Valve Gp-Relief -Steering
| 10***84 | Valve Group-Relief; -Steering | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***41 | Spring | 1 |
4t-2742 Valve Gp-Relief -Steering
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***41 | Spring | 1 |
| 4T***42 | Valve Group-Relief; -Secondary Steering | 1 |
3g-4667 Valve Gp-Relief -Cylinder Crossover
| 1J***97 | Valve; (Push-Pull) | 2 |
| 2J***89 | Springs | 2 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
6t-8046 Valve Gp-Solenoid
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 3G***71 | Cartridge Assem. | 1 |
| 3G***75 | Seal Kit; (Includes Seals And Ring) | 1 |
149-2658 Valve Gp-Solenoid
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 14***11 | Cartridge Assem. | 1 |
| 14***58 | Valve Group-Solenoid; -Blade Lock | 1 |
149-2610 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***10 | Valve Group-Solenoid; -Axle Oil Cooler-Hydraulic Lockout | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
6e-6298 Valve Gp-Solenoid & Relief -Steering
| 10***84 | Valve Group-Relief; -Steering | 1 |
| 1P***77 | Flange-Half (For Tilt Ports On Valve) | 2 |
| 1P***78 | Flange; (To 5v***09 Tube Assembly) | 4 |
8x-9487 Wheel Gp-Front
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 24 |
| 14***37 | Retainer | 2 |
| 14***39 | Retainer-Seal | 2 |
784B serial number reference
On the 784B the PIN plate is riveted to the frame, typically on the left-hand frame rail near the front of the machine or on the cab-support structure below the operator's station - check low on the chassis near ground level if not visible from the cab step. The plate reads as an eight-character serial: the first three characters are the letter/number prefix identifying the model and production series, followed by a five-digit sequential unit number used to date the build and track running changes.
| Prefix | Identifies | Notes |
|---|---|---|
| 5RK | 784B off-highway truck/tractor (yoke-type hitch towing a separate non-powered bottom-dump wagon) - single production series | Only documented PIN prefix for the 784B, built 1994-1997. Fitted with the 3512TA V12 diesel rated about 1350 hp (1007 kW), 6-speed automatic transmission with EPTC II controls, pneumatic suspension, all-wheel oil-cooled brakes with automatic retarder control. Rated payload class around 130 short tons (approx. 118 tonnes). From S/N 5RK00021-up, rear axle cooling and filtering became standard equipment. From S/N 5RK00022-up, the Vital Information Management System became standard. A conversion arrangement (towed trailer/wagon) configuration was also offered, but its availability is not confirmed to a specific serial cutover - verify with your dealer for a given unit. |
Frequently asked questions
What engine does the Caterpillar 784B use?
A Cat 3512TA V-12 diesel, rated at roughly 1350 hp (1007 kW) gross in the 784B build. The later shared-chassis 784C used a 3512 tune closer to 1290 hp, so power varies by series - confirm against the data plate for a specific unit.
What is the 784B's operating weight?
About 196,825 lb (89,280 kg) in tractor-only configuration. That figure covers the tractor unit alone and does not include whatever dump wagon or trailer is coupled to the yoke hitch.
What replaced the Caterpillar 784B?
The Cat 784C, which kept the same tractor-and-towed-wagon concept and the same class operating weight, later gaining mainframe commonality with the 785-series haul truck and a revised 3512 engine tune.
What 784B owners discuss
What engine powers the 784B and what should owners watch for?
The 784B runs the Cat 3512TA, a twin-turbo aftercooled V12 diesel rated around 1350 hp (bhp), per factory-level spec sheets for this model. On this engine family, aftercooler fouling is the main power and fuel-economy killer. A clogged or leaking aftercooler core shows up as smoky exhaust, high coolant temps, and soft power well before the engine throws a fault code. Injector wear on mechanically governed engines in this family has been linked to eventual cylinder-pack (liner/piston/ring) replacement, so oil sampling and injector balance checks catch problems early rather than late. Have your dealer verify aftercooler condition and injector balance before assuming a top-end rebuild is needed.
How does the 6-speed EPTC II transmission behave, and what fails first?
The 784B pairs its engine with a 6-speed automatic transmission using EPTC II electronic shift control. Reported symptoms on this control family, losing a gear, missed shifts, intermittent no-reverse, trace back to wiring and connector faults far more often than the shift solenoids themselves. A corroded connector pin or marginal crimp can pass a static resistance check on the bench and still fault under load and vibration. Before condemning a solenoid or clutch pack, back-probe connectors for correct voltage and inspect the harness for corrosion or broken strands hidden under intact-looking insulation.
What's the story with the oil-cooled brakes and automatic retarder?
All wheel positions use oil-cooled multi-disc brakes with an automatic retarder control that manages descent speed and keeps engine rpm in its working range. On long grades, brake oil temperature is the real limit, not pad or disc wear by itself. If cooling oil runs too hot, the fix is to reduce ground speed so the transmission drops a range and the oil pump and cooler can keep up. Running too fast downhill on a loaded return while ignoring the temperature gauge is the most common way to glaze the discs early. Have your dealer verify brake oil condition and cooler flow whenever temperatures run high. Overheated brakes on a machine this size are a safety item, not just a maintenance note.
What wear patterns show up on the tractor frame, hitch, and towed wagon's hoist system?
Off-center loading from the towed wagon is the recurring theme in structural wear on this tractor: uneven wagon loading stresses one side of the tractor frame, hitch yoke, and final drives more than the other, accelerating pivot-bore and bearing wear at the hitch. The towed wagon's own hoist cylinder rods should be checked for scoring or pitting, since a scored rod chews through seals quickly and drags down hoist speed on the wagon side. Any frame or hitch-yoke cracking that reaches a structural member is a stop-and-inspect item on the tractor itself. Have your dealer verify before the machine goes back into service.
What electrical or sensor issues come up most on this generation of machine?
Most sensor complaints on this era of Cat tractor turn out to be connector or harness problems rather than a bad sensor: corrosion migrating into a pin, a crimp that reads fine cold but opens up once the machine is hot and vibrating, or broken strands hidden inside insulation that looks intact. Before swapping a sensor, ohm out the full circuit including the connector body, not just the sensor leads. Reprogramming parameters on the machine's monitoring and engine control system needs dealer-level diagnostic software access. Field-level tools typically do not carry the rights to reflash or reset factory parameters.
Any quirks specific to the 784B as a mid-1990s, lower-volume model?
The 784B was built for only a few years in the mid-1990s, so it is a lower-volume machine next to its longer-running stablemates in the same size class. That means thinner used-market support and longer lead times on some parts. It shares its era's powertrain and electronic control architecture with contemporary Cat trucks, so drivetrain wear patterns and control quirks track what owners of that generation report generally. Its tractor frame, yoke hitch, and towed-wagon coupling are specific to this model's tractor-wagon configuration, so do not assume structural or hitch parts interchange with rigid-body trucks in the same size class without checking against this model's own service literature and data plate.
What should I check before buying a used 784B?
Ask for the machine's onboard monitoring history. Machines of this era carry electronic monitoring that logs engine, transmission, and brake fault history, and a seller who cannot produce it is a red flag. Walk the tractor frame and yoke hitch assembly for cracking at cross-member welds and any signs of prior weld repair; if a wagon is included, inspect its hoist cylinders and body separately. Check pivot bores at the hitch for play. Check brake oil condition and look for signs the cooling system has run hot in the past. Verify the actual configuration against the data plate. Engine rating, hitch type, and cab features varied by original order, so do not assume a generic spec sheet matches the specific machine. Have your dealer verify structural condition and brake system health before purchase. These are safety-critical systems on a machine this size.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 784B part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.