Caterpillaroff-highway truckquarry truck
Caterpillar 775D
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 775D is a rigid-frame off-highway truck built for quarry and aggregate hauling, marketed by Cat as the 775D Quarry Truck. It runs a Cat 3412E, a 12-cylinder turbocharged-and-aftercooled diesel of 27.0 L (1648 in3) displacement, rated 541 kW (725 hp) gross power and 517 kW (693 hp) net/flywheel power, driving a seven-speed electronic powershift transmission through a torque converter. Empty weight runs about 43,200 kg (95,240 lb) and gross machine weight tops out near 106,600 kg (235,000 lb), for a rated payload around 63,400 kg (139,770 lb). Cat built the 775D from roughly 1996 to 2002, following the earlier 775B and giving way to the 775E around 2002, which was itself replaced by the 775F in 2006 and later G-series and next-generation 775 trucks. Factory configurations included a standard flat-floor quarry body, a high-volume coal body for lighter bulk loads, and a bare chassis for water trucks, fuel/lube trucks, and other specialty builds.
Serial records split the run into an early build (6KR prefix) and a later build (8AS prefix), reflecting normal running changes to the transmission/chassis control electronics, brake and retarder calibration, and body options rather than a separate model. Cat carried the 3412E engine and torque-converter powershift driveline forward with only detail changes into the following 775E, so the drivetrain architecture, oil-cooled disc brakes, and shared hoist/brake hydraulic tank are common knowledge across that stretch of the lineup. In the used equipment market the 775D still turns up in quarry and aggregate fleets, where its lower acquisition cost and mechanically simple, pre-emissions-tier 3412E keep it working past the point where newer ACERT and Tier-4 trucks get sidelined by aftertreatment costs. Parts demand centers on the mechanical driveline: transmission and torque converter clutch packs, oil-cooled brake discs, wheel-end planetary final drive components, HEUI injectors and turbo hardware for the 3412E, and hoist cylinder seal kits.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 775D specifications
Engine
| Engine model | Cat 3412E (turbocharged, aftercooled V12 diesel) |
| Gross power | 541 kW (725 hp) at 2000 rpm |
| Net (flywheel) power | 517 kW (693 hp) at 2000 rpm |
| Displacement | 27.0 L (1647.7 cu in) |
| Cylinders | 12, V-configuration, four-stroke diesel |
| Aspiration | Turbocharged with air-to-air or jacket-water aftercooling |
| Peak torque | 2758 Nm (2034 lb-ft) at 1200 rpm |
| Fuel system | HEUI electronic unit injection |
| Emissions tier | Not documented for this production run — this generation predates published EPA/EU off-highway tier ratings in the sources checked; verify with your dealer if certification matters for the application |
Weights
| Empty (unloaded) weight | approx. 43 200 kg (95,300 lb) |
| Gross machine weight (fully loaded) | approx. 106 600 kg (235,000 lb) |
| Rated payload | approx. 63 400 kg (139,700 lb) |
| Ground pressure | Not published in available spec sheets for this model |
Dimensions
| Overall length | 9.70 m (31.83 ft) |
| Overall width | 3.97 m (13.03 ft) |
| Overall height (top of ROPS/canopy) | 4.41 m (14.47 ft) |
| Wheelbase | 4.19 m (13.75 ft) |
| Ground clearance | 0.60 m (1.97 ft) |
| Dump (body raised) height | approx. 8.80 m (28.88 ft) |
| Dump clearance (raised body to ground) | approx. 0.66 m (2.17 ft) |
| Body dump angle | 60 degrees |
| Tire size | 24.00-R35 radial |
Performance
| Transmission | Electronically controlled powershift, 7 forward speeds / 1 reverse, lock-up torque converter |
| Maximum travel speed | approx. 65.8 km/h (40.9 mph) |
| Body/gradeability note | Flat-floor quarry body is rated to retain load on grades up to about 12 percent on smoother haul roads; not a stated truck climbing-grade rating |
| Dump body capacity, struck | approx. 31.4 m3 (41.07 yd3) |
| Dump body capacity, heaped (2:1 SAE) | approx. 41.5 m3 (54.28 yd3) |
Service capacities (summary)
| Fuel tank | approx. 700 L (185 gal) |
| Engine oil | approx. 68 L (18 gal) |
| Cooling system | approx. 151 L (39.9 gal) |
| Hydraulic/brake-hoist system | approx. 307 L (81.2 gal) |
| Steering system | approx. 60 L (15.9 gal) |
| Final drives (each), if serviced separately | approx. 155 L reported in some spec compilations — treat as approximate, verify against the service manual for the specific serial range |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
775D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 68 L (18 US gal) | Cat DEO (Diesel Engine Oil), CF-4/CG-4 grade diesel engine oil. SAE 10W-30 for cold ambient down to about -18°C (0°F); SAE 15W-40 for temperate-to-hot climates, roughly -18°C to 40°C (0°F to 104°F) and above. Cat DEO Cold Weather / 0W-40 synthetic for extreme cold starts. |
| Cooling system | 151 L (39.9 US gal) | Cat ELC (Extended Life Coolant), premixed 50/50 concentrate. Cat DEAC (Diesel Engine Antifreeze/Coolant), a conventional low-silicate coolant, is an accepted alternative. Use a higher-concentrate blend for extreme cold-climate freeze protection per dealer guidance. |
| Fuel tank | 700 L (185 US gal) | No. 2-D diesel fuel meeting Cat fuel specification. Blend with No. 1-D (kerosene-type) fuel in cold climates to prevent fuel gelling and improve cold starting. |
| Power train — torque converter, transmission, and brake/hoist hydraulic system | 307 L (81.2 US gal) | Cat TDTO (Transmission/Drive Train Oil), TO-4 spec. SAE 30 for moderate ambient, roughly 0°C to 35°C (32°F to 95°F); SAE 10W for cold starts down to about -20°C (-4°F); SAE 50 for sustained high ambient above 40°C (104°F). Cat Arctic TDTO for sustained operation below about -20°C (-4°F). |
| Differential and final drives (common rear-axle sump) | 155 L (41 US gal) | Cat TDTO (Transmission/Drive Train Oil), TO-4 spec — same viscosity-by-climate grades as the power train system (SAE 10W/30/50 selected by ambient temperature). |
| Steering hydraulic system | 60 L (15.9 US gal) | Cat TDTO (Transmission/Drive Train Oil) per this truck's hydraulic circuit design, with Cat HYDO (Hydraulic Oil) as the alternative where a dedicated hydraulic fluid is called for. Select viscosity grade by ambient temperature the same as the power train system. Confirm against the serial-specific OMM, as the steering-vs-brake/hoist fluid split can vary by build. |
| Grease (chassis lubrication points, spec only) | Not a fill-volume item — service per grease-point interval | Cat multipurpose grease (NLGI 2 lithium-complex type) for standard climates. NLGI 1 or 0 grease for cold-climate lubrication points. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 775D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 8,000 h |
|
Servicing the 775D beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S.O.S sampling on the 3412E crankcase every 250 hours, and on the transmission/torque converter, differential/final drive, hoist/brake tank, and steering system every 500 hours. The 775D's hoist and brake circuits share one tank, so a rising iron or copper trend there can point to either the disc brake packs or the hoist pump. Track coolant chemistry on the ELC fill to catch water pump or aftercooler leaks before they show up as overheating on grade.
Corrective & Common Repairs
Expect wear in the oil-cooled multiple-disc brakes that double as service, park, and retarder brakes; quarry grades and loaded descents cycle them hard. HEUI injectors and the high-pressure oil pump on the 3412E are common failure points after high hours on dusty duty cycles. Torque converter and transmission clutch packs wear from repeated loaded shifts, and wheel-end planetary final drive seals leak after years in abrasive quarry muck. Frame rails and body hinge pins crack under sustained overload cycles.
Overhaul & Rebuild Points
Plan the 3412E for an in-frame or full engine rebuild: liners, pistons, turbo, injectors, once S.O.S trends and blow-by point to worn bores, typically well past mid-life on quarry duty. Torque converter/transmission exchange and planetary final drive rebuilds follow driveline hour milestones. Hoist cylinders need reseal after years of full-stroke dump cycles, and the oil-cooled disc brake packs get relined as friction material wears from retarding on loaded grades.
Seasonal & Environment Servicing
In cold climates, verify the ether starting aid and block heater before winter, and confirm ELC coolant protection level for the region. Dusty quarry sites shorten engine air precleaner and turbo precleaner service intervals; check and clean more often than the base 250-hour schedule. Hot ambient conditions push the hoist/brake oil cooler and radiator core toward fouling; clean fins and cooler screens more frequently, and watch tire heat buildup on long loaded hauls in summer.
775D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1R-0749 | Filter-Fuel | Fuel system service | Check fitment → |
| 129-0372 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 6I-2505 | Filter Element As-Air | Air intake service | Check fitment → |
| 6I-2506 | Filter Element As-Air | Air intake service | Check fitment → |
| 107-0266 | Filter Element-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
775D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 164-2 | Injection Actuation Pressure signal erratic, intermittent, or incorrect | Loose or corroded actuation pressure sensor connector, chafed harness wiring, or an unstable HEUI pump/actuation pressure control valve | Inspect the sensor connector and harness for damage, then compare actual versus desired injection actuation pressure with the diagnostic tool before condemning the pump or control valve |
| 164-3 | Injection Actuation Pressure sensor voltage above normal (shorted high) | Sensor signal wire shorted to a high-voltage source, or a failed pressure sensor | Check the sensor circuit for a short to power, test sensor supply and signal voltage against spec, replace the sensor once wiring checks out good |
| 100-3 | Engine Oil Pressure sensor voltage above normal or an open circuit in the signal wire | Open or shorted sensor wiring, a bad connector, or a failed oil pressure sensor | Disconnect the sensor and jumper the harness signal and ground pins; if the code changes to 100-4 the sensor is faulty, if it stays 100-3 the harness has an open circuit |
| 100-4 | Engine Oil Pressure sensor voltage below normal (shorted low) | Signal wire shorted to ground, or a failed oil pressure sensor | Check sensor wiring for a short to ground and confirm actual oil pressure with a mechanical gauge before replacing the sensor |
| 110-3 | Engine Coolant Temperature sensor voltage above normal | Corroded or damaged temperature sensor, or an open or shorted signal circuit | Inspect the sensor and connector for corrosion, check wiring continuity end to end, replace the sensor once wiring tests good |
| 102-3 | Boost Pressure sensor voltage above normal (shorted high) | Sensor signal circuit shorted to a high-voltage source, or a failed boost pressure sensor | Check the sensor connector and harness for a short to power, verify boost readings against a shop gauge, replace the sensor once wiring is confirmed good |
| 168-3 | Electrical System (ECM/battery supply) voltage above normal | Charging system overvoltage, a faulty voltage regulator, or a loose or corroded battery/ECM power connection | Check charging system output and battery connections, verify supply voltage at the ECM harness, correct the charging system fault before clearing the code |
| 168-4 | Electrical System (ECM/battery supply) voltage below normal | Low battery charge, corroded battery cables or ground straps, or a blown ECM power fuse | Load-test the battery, clean and tighten battery and ground connections, check the ECM power fuse and supply circuit |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
775D attachments & work tools
Dump body options
This truck class is offered with a quarry body, flat-floor body, or dual-slope body. The quarry body uses a single-slope floor around 12 degrees in 400 BHN hardened steel for uniform dumping into hoppers and crushers; flat-floor and dual-slope bodies use a 450 BHN base plate. Rated payload runs about 62.1-63.4 t (68.4-69.9 ton) and heaped SAE 2:1 capacity is about 41.5 m3 (54.3 yd3), varying by body and liner selection.
Body liner packages
A 16 mm (0.63 in) 400 BHN steel liner is offered for flat-floor and dual-slope bodies for high-impact, high-abrasion rock. Unlined or lightly lined dual-slope configurations suit coal and other light, well-fragmented material, trading wear life for reduced body weight and added payload.
Body wear accessories
Tail extensions, sideboards, external reinforcement plates, and rock shedders are offered to help hold rated payload and cut spillage. These bolt or weld onto the standard body rather than needing a separate mounting or coupler system.
Heated/exhaust body arrangement
Bodies in this class can route engine exhaust under the floor to keep sticky or freezing material from hanging up, with a full-time muffler or exhaust-diverter arrangement offered. Availability on a specific 775D build varies by configuration - verify with your dealer.
Bare chassis / vocational builds
The 775 platform, spanning the 775D era, is offered as a bare chassis for OEM-built water trucks, fuel/lube trucks, and tow tractors. These builds use a higher tractor-rated ROPS/FOPS certification than the standard dump-truck cab and omit the factory hoist and body unless ordered.
Tires
Standard fitment is 24.00R35 radial, front and rear, matched to this truck's roughly 65-70 ton payload class. Tire selection affects final rated payload and should match haul-road and rimpull requirements.
Body mounting and hoist
The dump body pivot-mounts to the frame at the rear hinge, with hydraulic hoist cylinders raising the body. There is no interchangeable quick-coupler or GET-style attachment system as used on loaders or excavators; bare-chassis units can be ordered with or without the hoist cylinders.
Vision/detection technology
Camera-based rear and surround-vision detection kits are available as a retrofit or factory-fit technology option on this truck class, improving operator awareness of personnel and equipment around the machine.
All 775D assemblies by section
Every catalogued assembly group for the Caterpillar 775D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
6i-2588 Air Cleaner Gp -Lh
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 6I***05 | Filter Element As-Air; -Primary | 1 |
| 6I***06 | Filter Element As-Air; -Secondary | 1 |
6i-2586 Air Cleaner Gp -Rh
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 6I***05 | Filter Element As-Air; -Primary | 1 |
| 6I***06 | Filter Element As-Air; -Secondary | 1 |
7c-4782 Air Cleaner Gp
| 10***66 | Gasket | 2 |
| 4W***63 | Precleaner As; Precleaner Assembly | 2 |
| 6I***86 | Air Cleaner Group; -Rh | 1 |
101-3431 Valve & Mtg Gp-Solenoid -Exhaust Bypass
| 10***30 | Valve Group-Solenoid; (Exhaust Bypass) | 1 |
| 10***31 | Valve & Mounting Group; -Exhaust Flow-Engine Speed | 1 |
| 3E***10 | Manifold | 1 |
101-3430 Valve Gp-Solenoid
| 10***30 | Valve Group-Solenoid; (Exhaust Bypass) | 1 |
| 10***55 | Cartridge As | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
189-8665 Valve Gp-Solenoid
| 10***55 | Cartridge As | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
129-6836 Aftercooler Gp-Water
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 20 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
103-4052 Cartridge Gp-Turbocharger
| 10***52 | Cartridge Group-Turbocharger | 1 |
| 10***25 | Nut; (3/8-24-Thd) | 1 |
| 13***17 | Shaft As-Turbine | 1 |
119-1273 Control Gp-Exhaust Flow
| 00***33 | Tee-Pipe | 1 |
| 00***10 | Tee; (Pipe) | 1 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 1 |
167-9658 Exhaust Ar-Engine -Diverter
| 11***73 | Control Group-Exhaust Flow; -Diverter | 1 |
| 15***53 | Muffler Group; -Engine | 1 |
| 16***58 | Exhaust Ar-Engine; -Diverter | 1 |
136-3178 Exhaust Ar-Engine
| 13***78 | Exhaust Ar-Engine | 1 |
| 15***41 | Pipe Group-Exhaust | 1 |
| 15***53 | Muffler Group; -Engine | 1 |
129-6832 Lines Gp-Air -Turbocharger Inlet
| 11***23 | Tube As-Turbocharger; (Lh) | 1 |
| 11***35 | Pipe-Turbocharger Outlet | 1 |
| 12***32 | Lines Group-Air; -Turbocharger Inlet | 1 |
127-6259 Lines Gp-Air -Turbocharger Inlet
| 12***71 | Tube | 1 |
| 12***59 | Elbow | 1 |
| 12***59 | Lines Group-Air; -Turbocharger Inlet | 1 |
143-0055 Lines Gp-Air -Turbocharger Inlet
| 12***42 | Tube As | 1 |
| 12***71 | Tube | 1 |
| 14***55 | Lines Group-Air; -Turbocharger Inlet | 1 |
142-4035 Lines Gp-Air -Turbocharger Exhaust
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 4 |
| 12***08 | Elbow-Exhaust | 1 |
| 14***35 | Lines Group-Air; -Turbocharger Exhaust | 1 |
160-7608 Lines Gp-Air -Turbocharger Inlet
| 10***68 | Plate As | 4 |
| 10***01 | Manifold As | 1 |
| 16***08 | Lines Group-Air; -Turbocharger Inlet | 1 |
129-6834 Manifold Gp-Exhaust
| 10***06 | Manifold-Exhaust; (End) | 4 |
| 10***12 | Spacer; (11.13x19.05x53-mm Thk) | 20 |
| 11***48 | Manifold-Exhaust; (Center, Rh) | 1 |
164-4603 Manifold Gp-Exhaust
| 10***12 | Spacer; (11.13x19.05x53-mm Thk) | 20 |
| 11***23 | Spacer; (11.13x19.05x19-mm Thk) | 4 |
| 12***52 | Gasket-Exhaust Manifold | 12 |
159-7353 Muffler Gp
| 03***09 | Locknut; (3/8-16-Thd) | 8 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 8 |
| 15***53 | Muffler Group; -Engine | 1 |
142-5676 Pipe Gp-Exhaust
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 14***76 | Pipe Group-Exhaust | 1 |
169-0429 Pipe Gp-Exhaust -Diverter
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 15 |
| 0S***75 | Pin-To Arm Assembly And Retainer | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
159-7341 Pipe Gp-Exhaust
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 9 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
| 15***35 | Box As | 1 |
4w-7263 Precleaner Gp -Air
| 1N***03 | Bolt-Hex Head | 1 |
| 2S***93 | Precleaner Cover Assembly | 1 |
| 2S***08 | Collector-Dust; (Air Precleaner) | 1 |
150-1714 Precleaner Gp -Air Cleaner
| 15***14 | Precleaner Group; -Air Cleaner | 1 |
| 2S***93 | Precleaner Cover Assembly | 1 |
| 2S***08 | Collector-Dust; (Air Precleaner) | 1 |
116-4120 Turbocharger Gp
| 10***52 | Cartridge Group-Turbocharger | 1 |
| 10***98 | Housing (Turbin) | 1 |
| 11***20 | Turbocharger Group | 1 |
129-6835 Turbocharger Gp
| 11***20 | Turbocharger Group | 2 |
| 12***35 | Turbocharger Group | 1 |
| 1S***95 | Gasket-Turbocharger To Manifold; Gasket Turbocharger To Manifold | 2 |
217-7903 Valve & Mtg Gp-Solenoid
| 18***65 | Valve Group-Solenoid; -Exhaust Bypass | 1 |
| 21***03 | Valve & Mtg Group-Solenoid; -Exhaust Bypass | 1 |
| 3E***10 | Manifold | 1 |
6d-1039 Valve Gp-Air Control -Exhaust Diverter
| 3P***59 | Spring | 1 |
| 6D***39 | Valve As; -Exhaust Bypass-Exhaust Diverter | 1 |
| 6F***72 | Seal (.674" Inside Diameter) | 1 |
Basic Engine
4n-7378 Air Compressor Gp
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 6 |
| 11***37 | Kit-Piston Ring; (Compressor 5 Ring) | 1 |
| 1W***03 | Plug | 2 |
4n-6842 Air Compressor Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 5 |
| 12***48 | Seal-Integral | 1 |
| 1F***58 | Nut-Full; (1/2-13-Thd)(Air Lines) | 3 |
125-5072 Belt Tensioner Gp
| 0S***75 | Pin-To Arm Assembly And Retainer | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 12***71 | Spring | 1 |
108-1553 Camshaft Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 10***74 | Gear-Camshaft Drive; (86-Teeth) | 1 |
| 10***53 | Camshaft Group | 1 |
168-8911 Cover Gp-Cylinder Block
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 10 |
| 16***11 | Cover Group-Cylinder Block | 1 |
| 23***37 | Seal-Integral | 1 |
129-5229 Cover Gp-Cylinder Block
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 13 |
| 12***29 | Cover Group-Cylinder Block | 1 |
| 23***37 | Seal-Integral | 1 |
131-2002 Cover Gp-Flywheel Housing
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 3 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
126-0768 Cover Gp-Front Housing
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 3 |
| 11***21 | Support-Housing; (Rh) | 1 |
129-6830 Cover Gp-Oil Pan -Engine
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 10***39 | Plug-Drain; (Engine Oil Pan) | 1 |
138-6642 Cover Gp-Valve Mechanism
| 10***88 | Base-Valve Mechanism Cover | 6 |
| 11***84 | Cover-Valve Mechanism | 2 |
| 11***15 | Cover As-Valve | 4 |
213-3202 Crankshaft As
| 15***40 | Gear-Crankshaft; (99-Teeth) | 1 |
| 21***02 | Crankshaft As | 1 |
| 4N***84 | Dowel; (.75 Long) | 1 |
4n-0922 Crankshaft Gp
| 11***66 | Gear-Crankshaft; (99-Teeth) | 1 |
| 24***18 | Kit-Crankshaft Bearing | 0 |
| 25***52 | Plate-Thrust; (Crankshaft) | 2 |
117-9512 Cylinder Block As
| 11***20 | Seal-O-Ring; (Mid-Liner) | 12 |
| 11***12 | Cylinder Block As | 1 |
| 14***17 | Seal-O-Ring; (140.20mm Id) | 12 |
126-1372 Cylinder Block As
| 12***72 | Cylinder Block As | 1 |
| 2W***15 | Insert-Liner Seat; (1.605-mm Thk)(1.59mm Thk) | 0 |
| 3P***23 | Bolt-Bearing Cap; (7/8-14x7.75-In) | 14 |
109-9010 Cylinder Block Gp
| 10***23 | Insert-Liner Seat; (5.21-mm Thk)(5.21mm Thk) | 0 |
| 10***24 | . Cover, Insert-Liner Seat; (5.16-mm Thk)(0.5-mm Us) | 0 |
| 10***25 | Insert-Liner Seat; (5.26-mm Thk)(0.5-mm Os), . Cover | 0 |
126-1373 Cylinder Block Gp
| 11***27 | Seal-O-Ring; (19.18mm Id) | 8 |
| 12***72 | Cylinder Block As | 1 |
| 12***73 | Cylinder Block Group | 1 |
7w-2243 Cylinder Head As
| 14***46 | Cylinder Head As | 1 |
| 17***88 | Guide-Valve; (Standard) | 24 |
| 2N***75 | Dowel | 12 |
143-0047 Cylinder Head As
| 14***46 | Cylinder Head As | 1 |
| 14***47 | Cylinder Head As | 1 |
| 17***88 | Guide-Valve; (Standard) | 24 |
105-3800 Cylinder Head As
| 10***00 | Cylinder Head As | 1 |
| 1W***83 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
| 3B***23 | Core Plug--Flywheel Housing Pinion Shaft Hole | 12 |
143-0046 Cylinder Head As
| 14***46 | Cylinder Head As | 1 |
| 1W***83 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
| 3B***23 | Core Plug--Flywheel Housing Pinion Shaft Hole | 12 |
192-1322 Cylinder Head As
| 10***94 | Dowel | 2 |
| 14***46 | Cylinder Head As | 1 |
| 17***88 | Guide-Valve; (Standard) | 24 |
108-1887 Cylinder Head Gp
| 10***94 | Dowel | 2 |
| 10***00 | Cylinder Head As | 1 |
| 10***87 | Cylinder Head Group | 1 |
108-1552 Cylinder Head Gp
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 06***61 | Seal-O-Ring (Id=40.87mm) | 12 |
| 10***92 | Stud-Taperlock; (3/8-16x3.93in) | 24 |
6n-2229 Damper Gp
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 12 |
| 16***30 | Damper As | 1 |
| 2D***74 | Bolt; (5/8-18x6.75-In) | 8 |
9n-0725 Drive Gp-Accessory
| 5P***40 | Seal-O-Ring | 1 |
| 6B***83 | Nut,Plain,Hexagon Lever | 1 |
| 7N***22 | Gear-Compressor Drive; (46-Teeth) | 1 |
125-5065 Drive Gp-Fan
| 12***62 | Bracket As-Fan | 1 |
| 12***65 | Drive Group-Fan | 1 |
| 1S***09 | Shaft-Tightener | 1 |
4n-7734 Flywheel Gp
| 2D***74 | Bolt; (5/8-18x6.75-In) | 12 |
| 4D***04 | Washer,Flat Cover Mtg,Accessory Drive | 12 |
| 4N***14 | Gear; (113-Teeth)(Flywheel Starter) | 1 |
126-7282 Gear Gp-Front -Timing
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 10***13 | Plate-Retaining | 1 |
| 10***16 | Gear; (85-Teeth)(Oil Pump) | 1 |
188-4500 Gear Gp-Front -Timing
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 10***13 | Plate-Retaining | 1 |
| 10***16 | Gear; (85-Teeth)(Oil Pump) | 1 |
136-7907 Gear Gp-Rear
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 13***36 | Adapter | 1 |
| 13***37 | Gear; (56 Teeth) | 1 |
4n-3825 Gear Gp-Rear
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 4 |
| 4N***25 | Gear Group-Rear; Rear Timing Gear Group | 1 |
| 4W***85 | Gear-Camshaft; (86-Teeth) | 1 |
129-6829 Housing Gp-Flywheel
| 03***94 | Connector-Flared | 1 |
| 03***68 | Elbow (For Use With Shallow Pan) | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
137-8142 Housing Gp-Front
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 3 |
| 13***42 | Housing Group-Front | 1 |
| 16***45 | Gasket-Cylinder Block | 1 |
126-7280 Housing Gp-Front
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 2 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 3 |
| 12***80 | Housing Group-Front | 1 |
129-5255 Lifting Gp-Engine
| 0S***73 | Bolt (102mm Long); (1/2-13x4-In) | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
122-0939 Lifting Gp-Engine -Side
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 11***75 | Bracket-Lifting; (Right) | 1 |
| 11***15 | Bracket-Lifting; (Left) | 1 |
129-6838 Lines Gp-Air Compressor
| 00***43 | Elbow; (12.7mm Id) | 1 |
| 00***26 | Connector; (Flared)(3/4-16 Thd, 47 mm Long) | 1 |
| 03***49 | Elbow; (90 Degree, 37 Degree Flared) | 1 |
132-3627 Pan Gp-Oil -Engine
| 13***27 | Pan Group-Oil; -Engine | 1 |
| 2P***03 | Bolt-Washer Head; (3/8-16x1.25-In) | 38 |
| 6N***96 | Gasket-Oil Pan | 1 |
192-8808 Piston & Rod Gp
| 13***61 | Ring-Piston; (Top)(Top) | 1 |
| 15***56 | Bolt-Special; (Oil Jet) | 1 |
| 16***78 | Rod As-Connecting | 1 |
109-2823 Piston & Rod Gp
| 10***23 | Piston & Rod Group | 1 |
| 13***61 | Ring-Piston; (Top)(Top) | 1 |
| 15***56 | Bolt-Special; (Oil Jet) | 1 |
128-5513 Platform Gp-Engine
| 12***13 | Platform Group-Engine | 1 |
| 13***26 | Platform As | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 2 |
129-5228 Plug Gp-Cylinder Block
| 12***28 | Plug Group-Cylinder Block | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 4 |
| 7W***34 | Plug-Pipe (3/8-18 Nptf Thd) | 4 |
129-6827 Plug Gp-Cylinder Head
| 12***27 | Plug Group-Cylinder Head | 1 |
| 4N***32 | Plug-Cup | 2 |
| 5P***63 | Plug-Cup | 2 |
8n-3448 Pulley Gp-Fan Drive
| 6N***59 | Pulley-Crankshaft; (2-Groove) | 1 |
| 8N***29 | Pulley-Crankshaft; (3-Groove) | 1 |
| 8N***48 | Pulley Group-Fan Drive | 1 |
107-1954 Rocker Arm Gp
| 10***54 | Rocker Arm Group | 1 |
| 10***03 | Screw; (3/8-24x1.67-In)(Intake) | 2 |
| 12***63 | Bracket-Shaft | 1 |
319-7401 Seal Gp-Crankshaft -Front
| 14***67 | Seal Group-Crankshaft; (Front) | 1 |
| 31***01 | Seal Group-Crankshaft; -Front | 1 |
319-0785 Seal Gp-Crankshaft -Rear
| 14***68 | Seal-Crankshaft; (Rear)(Flywheel Housing) | 1 |
| 31***85 | Seal Group-Crankshaft; -Rear | 1 |
142-4031 Support Gp-Engine -Rear
| 14***31 | Support Group-Engine; -Rear | 1 |
| 2A***38 | Bolt-(3/4" X 2-1/4")-Rops Mounting Bracket To Fender | 12 |
| 5P***48 | Washer--Bracket To L.H. Support Rail | 12 |
125-5041 Support Gp-Engine -Chassis
| 12***41 | Support Group-Engine; -Chassis | 1 |
| 1D***09 | Bolt Canopy Assembly To Mounting Brackets; Bolt-Canopy Assembly To Mounting Brackets | 4 |
| 1D***14 | Bolt--Front Support To Frame | 4 |
7e-6385 Support Gp-Engine -Front
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 4 |
| 4D***04 | Washer,Flat Cover Mtg,Accessory Drive | 4 |
| 4N***84 | Support-Front Engine | 1 |
129-6828 Trunnion Gp-Engine
| 0S***73 | Bolt (102mm Long); (1/2-13x4-In) | 4 |
| 12***28 | Trunnion Group-Engine | 1 |
| 34***37 | Mount As; (Resilient) | 1 |
108-1874 Valve Mechanism Gp
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 12 |
| 10***89 | Bridge-Valve | 24 |
| 10***88 | Valve Lifter Assem | 24 |
Braking System
2g-6535 Slack Adjuster Gp -Rear
| 03***77 | Tee-Pipe | 2 |
| 16***30 | Tank-Air | 2 |
| 2D***26 | Hose Assem. (20.50" Long Overall) | 1 |
131-3752 Air Dryer Gp
| 11***97 | Lining As-Brake; (Outboard) | 1 |
| 11***99 | Lining As-Brake; (Inboard) | 1 |
| 11***03 | Cover | 1 |
105-3210 Brake Gp-Service -Front
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 16 |
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 70 |
| 10***10 | Brake Group; -Front Caliper | 1 |
125-1384 Brake Gp-Hyd Caliper Service -Front
| 10***09 | Plate | 2 |
| 10***07 | Disc | 2 |
| 12***84 | Brake Group-Hydraulic Caliper Service; -Front | 3 |
2a-7070 Brake Gp-Service & Parking -Rear
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 16 |
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 70 |
| 10***10 | Housing | 2 |
137-6428 Control Ar-Integrated Brake
| 12***98 | Film-Instruction; (Parking Brake) | 1 |
| 12***71 | Valve Group-Air Control | 1 |
| 13***28 | Control Ar-Integrated Brake | 1 |
157-2714 Control Gp-Parking Brake
| 00***54 | Nipple-Pipe | 1 |
| 10***08 | Hose As | 1 |
| 14***16 | Valve Group-Relay; (Auto Retarder Ctrl Brake Air) | 2 |
136-1815 Control Gp-Service Brake -Platform
| 00***54 | Nipple-Pipe | 1 |
| 10***08 | Hose As | 1 |
| 13***15 | Control Group-Service Brake; -Platform | 1 |
163-5421 Control Gp-Service Brake -Cab
| 00***54 | Nipple-Pipe | 1 |
| 14***39 | Kit-Seal & Valve; (Brake Air Relay)(Master Cylinder Relay Valve) | 1 |
| 15***49 | Valve Group-Relay; (Brake Air)(Auto Retarder Cont) | 2 |
159-5294 Control Gp-Service Brake -Chassis
| 00***99 | Tee To Bushing | 1 |
| 00***33 | Tee-Pipe | 1 |
| 12***01 | Film-Information; (Indicator Lights) | 1 |
188-3968 Control Gp-Service Brake -Platform
| 13***31 | Seal | 1 |
| 18***68 | Control Group-Service Brake; -Platform | 1 |
| 25***38 | Valve | 1 |
8w-3405 Cylinder Gp-Air/Hydraulic -Rear Brake
| 2F***16 | Nut (Mounted On Flywheel Housing) | 8 |
| 5T***48 | Kit-Air Cylinder; (Incl Rings,Seals,Cup, | 1 |
| 6W***06 | Spring | 1 |
8x-6987 Cylinder Gp-Air/Hydraulic -Front
| 10***36 | Seal-O-Ring; (49.28mm Id) | 2 |
| 12***14 | Filter-Oil; (Ultra High Efficiency) | 2 |
| 13***12 | Filter-Oil; (Advanced Efficiency) | 2 |
132-5448 Filter Gp-Oil -Service Brake
| 10***36 | Clip | 9 |
| 11***43 | Valve Group-Brake; -Automatic Retarder-Park, Secondary Brake | 1 |
| 13***48 | Filter Group-Oil; -Parking Brake Release | 2 |
135-9414 Lines Gp-Service Brake -Rear
| 10***36 | Clip | 9 |
| 11***43 | Valve Group-Brake; -Automatic Retarder-Park, Secondary Brake | 1 |
| 13***48 | Filter Group-Oil; -Parking Brake Release | 1 |
135-9415 Lines Gp-Service Brake -Front
| 10***36 | Clip | 2 |
| 13***52 | Tube As | 1 |
| 13***54 | Tube As | 1 |
188-3970 Lines Gp-Service Brake -Platform
| 13***25 | Control Group-Retarder; -Chassis | 1 |
| 17***50 | Cab Ar; -Automatic Retarder Control | 1 |
| 18***70 | Lines Group-Service Brake; -Platform | 1 |
159-5292 Lines Gp-Service Brake -Platform
| 10***36 | Clip | 2 |
| 14***26 | Tank Group-Brake | 1 |
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
139-5224 Retarder Ar-Automatic
| 13***24 | Retarder Ar-Automatic | 1 |
| 2G***02 | Spring | 2 |
| 2G***82 | Base | 1 |
159-3057 Tank Gp-Air -Secondary
| 15***57 | Tank Group-Air; -Secondary | 1 |
| 18***83 | Tank As-Air | 1 |
| 2H***91 | Union --Block To Hose Assembly; -- Block To Hose Assembly | 2 |
131-3755 Tank Gp-Air -Primary
| 13***55 | Tank Group-Air; -Primary | 1 |
| 14***46 | Plug-Pipe | 1 |
| 16***80 | Tank-Air | 1 |
188-3966 Tank Gp-Air -Primary
| 18***66 | Tank Group-Air; -Primary | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
| 5J***06 | Fitting; (9/16-18-Thd) | 1 |
143-9426 Tank Gp-Brake
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Switch As-Pressure; (Tractor Brake) | 1 |
| 14***26 | Tank Group-Brake | 1 |
217-7906 Valve & Mtg Gp-Brake
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 2 |
| 11***24 | Cylinder Group-Air; (Brake) | 1 |
| 13***86 | Kit-Seal; (Incls Ring & Seals) | 1 |
127-4661 Valve & Mtg Gp-Brake -Automatic Retarder
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Switch As-Pressure; (Tractor Brake) | 1 |
| 12***61 | Valve & Mtg Group-Brake; -Automatic Retarder | 1 |
113-1543 Valve Gp-Brake -Parking, Secondary
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 11***43 | Valve Group-Brake; -Automatic Retarder-Park, Secondary Brake | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
179-9935 Valve Gp-Check -Parking, Secondary Brake
| 17***35 | Valve Group-Check; -Parking, Secondary Brake | 1 |
| 8D***55 | Seal-Quad Ring | 2 |
| 8D***56 | Ring-Retaining | 2 |
6d-3781 Valve Gp-Check -Retarder Control-Service Brake Control
| 5K***63 | Gasket | 1 |
| 5K***65 | Retainer & Seat Assem. | 1 |
| 6D***81 | Valve Group-Check; -Service Brake Diverter-Retarder Control | 1 |
4k-9714 Valve Gp-Check -Brake Air Relay
| 2R***32 | Guide-Shuttle | 1 |
| 2R***13 | Cap | 1 |
| 3D***45 | Seal-Bottle To Connector | 1 |
1u-2644 Valve Gp-Check -Parking, Secondary Brake
| 1U***44 | Valve Group-Check; -Secondary, Parking Brake | 1 |
| 9V***76 | Valve Group-Check; Check Valve Group-Wagner Electric Corp | 1 |
| 9V***41 | Valve Group-Check; -Brake Air Relay | 1 |
9v-0476 Valve Gp-Check -Brake Air Relay
| 2R***32 | Guide-Shuttle | 1 |
| 2R***14 | Cap | 1 |
| 3D***45 | Seal-Bottle To Connector | 1 |
9v-1541 Valve Gp-Check -Brake Air Relay
| 13***33 | Valve-Check; (Parking & Secondary Brake) | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 2 |
3g-2887 Valve Gp-Diverter -Towing, Parking Brake Release
| 06***39 | Seal-O-Ring | 1 |
| 3G***87 | Valve Group-Diverter; -Towing, Parking Brake Release | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
6e-6305 Valve Gp-Relief -Parking, Secondary Brake
| 10***17 | Cartridge As | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
3e-8691 Valve Gp-Solenoid
| 3E***91 | Valve Group-Solenoid | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
188-9250 Valve Gp-Solenoid
| 10***17 | Cartridge As | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
7t-9074 Valve Gp-Solenoid
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 31***46 | Coil As | 1 |
189-8666 Valve Gp-Solenoid
| 10***57 | Cylinder Group-Steering | 2 |
| 18***66 | Valve Group-Solenoid | 1 |
| 1B***45 | Nut-Slotted | 4 |
185-0008 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***08 | Valve Group-Solenoid; -Air Horn | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
Cooling System
141-4109 Core Gp-Oil Cooler -Brake, Hoist
| 14***09 | Core Group-Oil Cooler; -Brake, Frame Mount-Transmission, Engine Mount-Tc, Bk, Hoist, Engine Mount | 1 |
| 8T***64 | Plug-Pipe; (1/8-27-Thd)(Cylinder Head) | 2 |
125-5070 Fan Gp-Suction
| 12***67 | Guard As-Fan; (Rh) | 1 |
| 12***68 | Guard As-Fan; (Lh) | 1 |
| 12***70 | Fan Group-Suction | 1 |
143-0057 Lines Gp-Coolant Drain
| 14***93 | Hose As | 1 |
| 14***94 | Hose As | 1 |
| 14***57 | Lines Group-Coolant Drain | 1 |
134-2828 Lines Gp-Water
| 01***24 | Bushing To Supply Port | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
131-3347 Lines Gp-Water -Aftercooler
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 3 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 3 |
4n-5837 Pump Gp-Water
| 10***49 | Adapter-Inlet | 1 |
| 11***79 | Seal-O-Ring | 1 |
| 11***80 | Seal-O-Ring | 1 |
134-1487 Pump Gp-Water
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 10***85 | Retainer | 1 |
| 10***90 | Housing As-Pump | 1 |
137-1339 Pump Gp-Water
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 10***30 | Bearing As-Roller | 1 |
| 11***21 | Plug-Felt; (Water Pump Housing) | 1 |
140-3653 Radiator Gp
| 10***22 | Tube As-Inlet | 1 |
| 12***44 | Radiator Group | 1 |
| 12***46 | Shield As | 1 |
125-5044 Radiator Gp
| 12***33 | Channel As | 1 |
| 12***34 | Channel As | 1 |
| 12***36 | Tank As-Radiator | 1 |
203-7962 Radiator Gp
| 10***22 | Tube As-Inlet | 1 |
| 10***84 | Dial | 1 |
| 12***44 | Radiator Group | 1 |
Electrical And Starting System
123-6449 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***49 | Alarm Group | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
3e-6328 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
4n-2185 Alternator Gp-Charging
| 0S***23 | Bolt (.50 In. Diameter) | 1 |
| 16***45 | Alternator Group-Charging | 1 |
| 1S***98 | Rod | 1 |
169-3345 Alternator Gp-Charging
| 16***45 | Alternator Group-Charging | 1 |
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
159-5295 Battery & Wiring Gp
| 03***97 | Boot | 1 |
| 12***54 | Cable As; (Disconnect) | 1 |
| 15***57 | Cover | 1 |
137-6424 Battery & Wiring Gp -Cold Weather
| 11***18 | Clip | 1 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 13***24 | Battery & Wiring Group; -Cold Weather Starting | 1 |
131-2001 Control & Mtg Gp-Engine Elek
| 10***22 | Control Group-Engine Electronic | 1 |
| 11***69 | Spacer-Special; (8.2x25x89.7-mm Thk) | 4 |
| 13***01 | Control & Mtg Group-Engine Elek | 1 |
131-3763 Control & Mtg Gp-Power Train
| 11***42 | Insulator | 2 |
| 13***63 | Control & Mtg Group-Power Train; -Transmission, Chassis | 1 |
| 16***36 | Plate As | 1 |
105-6122 Control Gp-Engine Electronic
| 10***22 | Control Group-Engine Electronic | 1 |
| 17***02 | Control Group-Engine Electronic | 1 |
156-7172 Control Gp-Engine Electronic
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***72 | Control Group-Engine Electronic | 1 |
172-0802 Control Gp-Engine Electronic
| 11***11 | Cover | 1 |
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 17***02 | Control Group-Engine Electronic | 1 |
172-9387 Control Gp-Unprogrammed
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 17***87 | Control Group-Unprogrammed; -Traction Control-Transmission, Chassis-Integrated Brake | 1 |
172-9391 Control Gp-Unprogrammed -Traction Control-Transmission, Chassis-Automatic Retarder-Integrated Brake
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 17***91 | Control Group-Unprogrammed; -Traction Control-Transmission, Chassis-Automatic Retarder-Integrated Brake | 1 |
200-5372 Electronics Gp-Machine -Integrated Brake
| 14***94 | Film-Identification; (Integrated Brake Control) | 1 |
| 17***87 | Control Group-Unprogrammed; -Traction Control-Transmission, Chassis-Integrated Brake | 1 |
| 19***79 | Software Group-Machine; -Integrated Brake | 1 |
164-6898 Electronics Gp-Machine -Integrated Brake
| 14***94 | Film-Identification; (Integrated Brake Control) | 1 |
| 16***98 | Electronics Group-Machine; -Integrated Brake | 1 |
| 17***91 | Control Group-Unprogrammed; -Traction Control-Transmission, Chassis-Automatic Retarder-Integrated Brake | 1 |
164-6899 Electronics Gp-Machine -Automatic Retarder
| 14***92 | Film-Identification; (Automatic Retarder)(Automatic Retarder) | 1 |
| 16***99 | Electronics Group-Machine; -Automatic Retarder | 1 |
| 17***91 | Control Group-Unprogrammed; -Traction Control-Transmission, Chassis-Automatic Retarder-Integrated Brake | 1 |
200-5373 Electronics Gp-Machine -Automatic Retarder
| 17***87 | Control Group-Unprogrammed; -Traction Control-Transmission, Chassis-Integrated Brake | 1 |
| 19***82 | Software Group-Machine; -Automatic Retarder | 1 |
| 20***73 | Electronics Group-Machine; -Automatic Retarder | 1 |
200-5374 Electronics Gp-Machine -Traction Control
| 17***87 | Control Group-Unprogrammed; -Traction Control-Transmission, Chassis-Integrated Brake | 1 |
| 20***74 | Electronics Group-Machine; -Traction Control | 1 |
| 29***94 | Software Group-Machine | 1 |
164-6900 Electronics Gp-Machine -Traction Control
| 14***93 | Film; (Traction Control) | 1 |
| 16***00 | Electronics Group-Machine; -Traction Control | 1 |
| 17***91 | Control Group-Unprogrammed; -Traction Control-Transmission, Chassis-Automatic Retarder-Integrated Brake | 1 |
200-5375 Electronics Gp-Power Train -Transmission, Chassis
| 14***91 | Film-Identification; (Transmission Control)(Transmission) | 1 |
| 17***87 | Control Group-Unprogrammed; -Traction Control-Transmission, Chassis-Integrated Brake | 1 |
| 20***75 | Electronics Group-Power Train; -Transmission, Chassis | 1 |
164-6901 Electronics Gp-Power Train -Transmission/Chassis
| 14***91 | Film-Identification; (Transmission Control)(Transmission) | 1 |
| 16***01 | Electronics Group-Power Train; -Transmission/Chassis | 1 |
| 17***91 | Control Group-Unprogrammed; -Traction Control-Transmission, Chassis-Automatic Retarder-Integrated Brake | 1 |
168-7059 Heater Gp-Jacket Water
| 16***85 | Plate As | 1 |
| 16***59 | Heater Group-Jacket Water | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 1 |
168-7060 Heater Gp-Jacket Water
| 16***85 | Plate As | 1 |
| 16***60 | Heater Group-Jacket Water | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 1 |
8c-9678 Lamp Gp-Dome
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***82 | Housing (Plug) (To Lift Kickout Switch) | 1 |
162-3294 Lamp Gp-Flood -Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
161-0908 Lamp Gp-Head
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
| 16***08 | Lamp Group-Head; -Fog Light | 1 |
157-0305 Lamp Gp-Head -High Beam
| 15***05 | Lamp Group-Head; -High Beam | 1 |
| 15***49 | Lens As; (Headlight, High Beam) | 1 |
| 15***50 | Body As-Lamp | 1 |
161-4016 Lamp Gp-Rear
| 11***14 | Bracket Assem. | 1 |
| 13***26 | Lamp Group-Signal; (24-Volt, Stop, Tail)(Stop/Tail) | 1 |
| 13***27 | Lamp Group-Signal; -Park, Turn | 1 |
8t-9684 Lamp Gp-Signal
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***38 | Housing-Receptacle-Sure Seal-Assemble | 1 |
135-0426 Lamp Gp-Signal -Stop, Tail
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***26 | Lamp Group-Signal; (24-Volt, Stop, Tail)(Stop/Tail) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
8t-9683 Lamp Gp-Signal
| 7D***14 | Kit (Lens) (Includes Gasket, Screw & Lens) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
135-0427 Lamp Gp-Signal -Park, Turn
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***27 | Lamp Group-Signal; -Park, Turn | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
161-9850 Panel Gp-Circuit Breaker
| 13***78 | Cap; (Fuse Holder) | 1 |
| 16***46 | Wire As | 1 |
| 16***47 | Harness As; (Circuit Breaker) | 1 |
177-0220 Panel Gp-Circuit Breaker
| 13***78 | Cap; (Fuse Holder) | 1 |
| 16***49 | Cover | 1 |
| 17***67 | Wire As | 1 |
113-0752 Sensor & Mtg Gp-Payload
| 03***67 | Ring; (Back Up) | 4 |
| 03***39 | Seal-O-Ring (Id=9.25mm) | 4 |
| 11***52 | Sensor & Mtg Group-Payload | 1 |
204-7949 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 20***49 | Sensor Group-Position; -Throttle | 1 |
176-1602 Sensor Gp-Position -Accelerator Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 17***02 | Sensor Group-Position; -Accelerator Control | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
219-2389 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 21***89 | Sensor Group-Position | 1 |
137-7579 Sensor Gp-Position -Hoist Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***79 | Sensor Group-Position; -Hoist Control | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
126-7896 Sensor Gp-Position
| 12***96 | Sensor Group-Position; -Transmission Shift Lever | 1 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
| 8T***28 | Seal-Lip Type | 1 |
118-8471 Sensor Gp-Position
| 11***71 | Sensor Group-Position; -Transmission Gear | 1 |
| 7B***42 | Bolt, Hex. Hd., 1/4in.-20 N.C. X 1 1/4in. | 2 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
198-8761 Sensor Gp-Position
| 19***61 | Sensor Group-Position; (Transmission Speed) | 1 |
| 7B***42 | Bolt, Hex. Hd., 1/4in.-20 N.C. X 1 1/4in. | 2 |
| 7T***76 | Spacer; (1.22-mm Thk) | 1 |
3e-7700 Sensor Gp-Position -Accelerator Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 3E***00 | Sensor Group-Position; -Accelerator Control | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
194-6725 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
175-3186 Sensor Gp-Pressure -Suspension Cylinder
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***86 | Sensor Group-Pressure; -Suspension Cylinder | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
161-9931 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***31 | Sensor Group-Pressure; -Atmospheric | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 3 |
161-9925 Sensor Gp-Pressure -Atmospheric Air
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***25 | Sensor Group-Pressure; -Turbocharger Inlet | 1 |
103-6092 Sensor Gp-Pressure -Engine Oil
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 10***92 | Sensor Group-Pressure; -Filtered Oil, Unfiltered Oil | 1 |
161-9926 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***26 | Sensor Group-Pressure; -Atmospheric Air, Turbo Inlet | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
167-1709 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***09 | Sensor Group-Pressure; -Injection Actuation Oil | 1 |
| 9X***13 | Sleeve (Order By cm)(Use As Required) | 0 |
103-6093 Sensor Gp-Pressure -Atmospheric Air
| 10***93 | Sensor Group-Pressure; -Turbocharger Inlet-Atmospheric, Crankcase | 1 |
| 15***89 | Tube; (3cm) | 0 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
194-6724 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***24 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
194-6722 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 1 |
153-3962 Sensor Gp-Pressure -Air System
| 15***62 | Sensor Group-Pressure; -Lockup Clutch | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
124-0328 Sensor Gp-Pressure -Payload
| 12***28 | Sensor Group-Pressure; -Payload | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
185-0600 Sensor Gp-Pressure
| 18***00 | Sensor Group-Pressure | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
5t-4118 Sensor Gp-Speed
| 1T***84 | Bolt-Socket Head; (5/16-18x1-In) | 4 |
| 20***73 | Sensor Group-Speed; (Traction Aid) | 2 |
| 5T***18 | Sensor Group-Speed; (Traction Aid) | 1 |
129-6628 Sensor Gp-Speed
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 12***28 | Sensor Group-Speed; -Engine Speed/Timing | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
265-9033 Sensor Gp-Speed
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 2 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***27 | Harness As-Sensor; (14-Ga Wire)(Engine Oil Temperature) | 3 |
9g-9629 Sensor Gp-Speed -Transmission
| 14***78 | Sensor Group-Speed | 1 |
| 1B***67 | Ball Bearing | 1 |
| 2A***62 | Screw,Cap,Hexagon H Diode Pig Tail To Grd; (1/4-20x.625 In) | 4 |
273-5041 Sensor Gp-Speed
| 11***66 | Seal-O-Ring | 1 |
| 13***07 | Washer; (21.1x28.1x0.9-mm Thk) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
106-0735 Sensor Gp-Temperature
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***35 | Sensor Group-Temperature; -Engine Oil | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
102-2240 Sensor Gp-Temperature
| 10***40 | Sensor Group-Temperature; -Output Transfer Gear Oil | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
142-5679 Sensor Gp-Temperature
| 11***26 | Sensor Group-Temperature; -Transmission Oil | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 14***79 | Sensor Group-Temperature | 1 |
118-7226 Sensor Gp-Temperature
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***26 | Sensor Group-Temperature; -Transmission Oil | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
199-5079 Software Gp-Machine -Integrated Brake
| 19***79 | Software Group-Machine; -Integrated Brake | 1 |
199-5082 Software Gp-Machine -Automatic Retarder
| 19***82 | Software Group-Machine; -Automatic Retarder | 1 |
199-5085 Software Gp-Machine -Traction Control
| 19***85 | Software Group-Machine; -Traction Control | 1 |
142-5683 Starting Aid Ar-Ether
| 14***83 | Starting Aid Ar-Ether | 1 |
| 14***84 | Starting Aid Group-Ether | 1 |
| 14***85 | Starting Aid Group-Ether; -Chassis | 1 |
142-5684 Starting Aid Gp-Ether
| 12***95 | Tube | 1 |
| 14***84 | Starting Aid Group-Ether | 1 |
| 6N***72 | Ether Atomizer--Spray | 1 |
142-5685 Starting Aid Gp-Ether
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 14***85 | Starting Aid Group-Ether; -Chassis | 1 |
136-3183 Starting Ar-Cold Weather
| 13***83 | Starting Ar-Cold Weather | 1 |
| 13***24 | Battery & Wiring Group; -Cold Weather Starting | 1 |
| 15***79 | Wiring Group-Engine; -Cold Weather | 1 |
4n-1061 Starting Motor Gp-Electric
| 4N***59 | Gasket; (Starting Motor) | 1 |
| 4N***61 | Starting Motor Group-Electric | 1 |
| 6V***90 | Starting Motor Group-Electric; (Delco Remy) | 1 |
7n-1059 Starting Motor Gp-Electric
| 10***28 | Wire As | 1 |
| 4H***69 | Gasket Starter Mtg Part Of Kit P/N 5r***25 | 1 |
| 6V***85 | Starting Motor Group-Electric; -Cold Weather | 1 |
338-3454 Starting Motor Gp-Electric
| 2H***22 | Lockwasher | 2 |
| 33***54 | Starting Motor Group-Electric | 1 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
6v-0885 Starting Motor Gp-Electric -Cold Weather
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
237-1962 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 13 |
6v-0890 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
7n-0718 Switch Gp-Disconnect -Battery
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 0 |
| 17***08 | Switch Group-Flow; -Engine Coolant | 1 |
| 2B***95 | Cap Screw--Tube Assembly To Air Inlet Pipe | 2 |
142-3985 Switch Gp-Magnetic -Secondary Steering Relay-Engine Prelubrication Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***85 | Switch As-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
142-3984 Switch Gp-Magnetic -Secondary Steering Relay-Engine Prelubrication Relay
| 14***84 | Switch As-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 6V***78 | Nut; (10-32-Thd) | 2 |
100-4417 Switch Gp-Flow
| 10***17 | Switch Group-Flow; -Engine Coolant | 1 |
| 14***84 | Switch As-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 14***85 | Switch As-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
175-2309 Switch Gp-Magnetic
| 16***74 | Lamp-Led; (24-Volt, Cab Floodlight Switch) | 1 |
| 17***34 | Switch As-Rocker; (Exhaust Diverter) | 0 |
| 17***18 | Actuator | 1 |
3e-0154 Switch Gp-Magnetic -Secondary Steering Relay-Engine Prelubrication Relay
| 3E***54 | Switch Group-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
| 6V***78 | Nut; (10-32-Thd) | 2 |
175-2308 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***81 | Switch As-Magnetic; (Start Relay) | 1 |
118-3534 Switch Gp-Magnetic
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
169-0884 Switch Gp-Rocker -Exhaust Diverter
| 11***18 | Clip | 1 |
| 16***56 | Harness As-Control; (Integrated Brake)(Main Cab) | 1 |
| 16***57 | Harness As-Valve; (Automatic Retarder Control)(Auto Retarder Control Valve) | 1 |
174-3753 Wiring Gp-Automatic Retarder -Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***77 | Switch As-Pressure; (Engine Oil) | 1 |
| 10***26 | Control Group-Monitor Sys Dimmer; -Backlight Dimmer | 1 |
162-5322 Wiring Gp-Cab
| 03***48 | Clip; (11.11mm .437in Id) | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 0 |
136-1811 Wiring Gp-Chassis
| 03***48 | Clip; (11.11mm .437in Id) | 4 |
| 10***08 | Plug-Connector | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
147-1130 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 3 |
| 12***33 | Cover As; (Auxiliary Start Receptacle) | 1 |
118-9692 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 3 |
| 11***92 | Wiring Group-Engine | 1 |
158-8879 Wiring Gp-Engine -Cold Weather
| 15***79 | Wiring Group-Engine; -Cold Weather | 1 |
| 17***73 | Harness As-Valve; (Exhaust Diverter) | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 3 |
174-9663 Wiring Gp-Exhaust Diverter
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***46 | Plug As-Connector; (40-Pin) | 1 |
| 11***48 | Plug As-Connector; (40-Pin) | 1 |
174-3770 Wiring Gp-Integrated Brake
| 13***78 | Cap; (Fuse Holder) | 1 |
| 16***45 | Harness As-Control; (Payload)(Tpms) | 1 |
| 16***56 | Panel | 1 |
143-0028 Wiring Gp-Monitor -Payload
| 14***28 | Wiring Group-Monitor; -Payload | 1 |
| 15***49 | Cable As | 1 |
| 15***50 | Cable As | 1 |
157-1651 Wiring Gp-Prelubrication -Cab
| 15***51 | Wiring Group-Prelubrication; -Cab | 1 |
| 16***44 | Harness As; (Rear) | 1 |
| 1F***50 | Nut Rops Support | 8 |
157-1642 Wiring Gp-Prelubrication -Chassis
| 13***24 | Film-Notice; (Prelubrication)(Key Start) | 1 |
| 13***78 | Cap; (Fuse Holder) | 1 |
| 15***42 | Wiring Group-Prelubrication; -Chassis | 1 |
137-6813 Wiring Gp-Sensor -Payload
| 13***00 | Clip; (Tab) | 4 |
| 13***13 | Wiring Group-Sensor; -Payload Monitoring | 1 |
| 18***03 | Harness As-Sensor; (Payload Monitoring) | 1 |
157-1643 Wiring Gp-Sensor -Wheel Speed
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***46 | Plug As-Connector; (40-Pin) | 1 |
| 11***48 | Plug As-Connector; (40-Pin) | 1 |
174-3728 Wiring Gp-Traction Control -Cab
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***46 | Plug As-Connector; (40-Pin) | 1 |
| 11***48 | Plug As-Connector; (40-Pin) | 1 |
109-0401 Wiring Gp-Unit Injector
| 10***01 | Wiring Group-Unit Injector | 1 |
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 2 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
Engine Arrangement
131-4878 Engine Ar
| 10***17 | Switch Group-Flow; -Engine Coolant | 1 |
| 10***52 | Cylinder Head Group | 1 |
| 10***53 | Camshaft Group | 1 |
144-3578 Engine Ar-Core
| 10***17 | Switch Group-Flow; -Engine Coolant | 1 |
| 10***52 | Cylinder Head Group | 1 |
| 10***53 | Camshaft Group | 1 |
143-7474 Engine Ar-General
| 12***58 | Installation Ar-Engine | 1 |
| 14***42 | Torque Converter Ar | 1 |
| 14***74 | Engine Ar-General | 1 |
128-8558 Installation Ar-Engine
| 12***23 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
| 12***46 | Filler Group-Engine Oil | 1 |
| 12***65 | Drive Group-Fan | 1 |
Frame And Body
246-9893 Body & Canopy As
| 13***95 | Bracket As | 2 |
| 19***56 | Plate-Serial Number; (Body, Model, Pin)(Dual Slope Body & Canopy As) | 1 |
| 24***93 | Body & Canopy As | 1 |
241-1009 Body & Canopy As
| 13***95 | Bracket As | 2 |
| 19***56 | Plate-Serial Number; (Body, Model, Pin)(Dual Slope Body & Canopy As) | 1 |
| 24***09 | Body & Canopy As | 1 |
246-9894 Body & Canopy As
| 13***95 | Bracket As | 2 |
| 13***11 | Canopy As | 1 |
| 19***56 | Plate-Serial Number; (Body, Model, Pin)(Dual Slope Body & Canopy As) | 1 |
239-0288 Body & Canopy As
| 13***95 | Bracket As | 2 |
| 19***56 | Plate-Serial Number; (Body, Model, Pin)(Dual Slope Body & Canopy As) | 1 |
| 23***88 | Body & Canopy As | 1 |
137-3305 Body & Canopy As-Quarry
| 13***05 | Body & Canopy As-Quarry | 1 |
| 15***57 | Canopy As | 1 |
| 19***56 | Plate-Serial Number; (Body, Model, Pin)(Dual Slope Body & Canopy As) | 1 |
137-7315 Body & Canopy As-Quarry -European Market
| 11***64 | Guard As; (Lh) | 1 |
| 11***65 | Guard As; (Rh) | 1 |
| 13***32 | Body & Canopy As-Quarry | 1 |
137-3432 Body & Canopy As-Quarry
| 13***95 | Bracket As | 2 |
| 13***11 | Canopy As | 1 |
| 13***32 | Body & Canopy As-Quarry | 1 |
137-7306 Body & Canopy As-Quarry -European Market
| 13***95 | Bracket As | 2 |
| 13***06 | Body & Canopy As-Quarry; -European Market | 1 |
| 15***57 | Canopy As | 1 |
136-3172 Body Gp-Quarry
| 13***72 | Body Group-Quarry | 1 |
| 13***04 | Body Group-Quarry | 1 |
| 13***55 | Liner Group-Body | 1 |
137-3304 Body Gp-Quarry
| 11***64 | Guard As; (Lh) | 1 |
| 11***65 | Guard As; (Rh) | 1 |
| 13***04 | Body Group-Quarry | 1 |
137-7307 Body Gp-Quarry
| 11***64 | Guard As; (Lh) | 1 |
| 11***65 | Guard As; (Rh) | 1 |
| 13***07 | Body Group-Quarry | 1 |
239-0287 Body Gp-Quarry
| 11***64 | Guard As; (Lh) | 1 |
| 11***65 | Guard As; (Rh) | 1 |
| 23***87 | Body Group-Quarry | 1 |
136-3174 Body Gp-Quarry
| 13***74 | Body Group-Quarry | 1 |
| 13***55 | Liner Group-Body | 1 |
| 13***07 | Body Group-Quarry | 1 |
136-3173 Body Gp-Quarry
| 11***64 | Guard As; (Lh) | 1 |
| 11***65 | Guard As; (Rh) | 1 |
| 13***73 | Body Group-Quarry | 1 |
136-3175 Body Gp-Quarry
| 11***64 | Guard As; (Lh) | 1 |
| 11***65 | Guard As; (Rh) | 1 |
| 13***75 | Body Group-Quarry | 1 |
248-4082 Body Gp-Truck
| 12***04 | Cowling As | 1 |
| 12***85 | Baffle As | 1 |
| 24***82 | Body Group-Truck | 1 |
246-9891 Body Gp-Truck
| 11***64 | Guard As; (Lh) | 1 |
| 11***65 | Guard As; (Rh) | 1 |
| 24***09 | Body & Canopy As | 1 |
246-9889 Body Gp-Truck
| 13***55 | Liner Group-Body | 1 |
| 24***89 | Body Group-Truck | 1 |
| 24***81 | Body Group-Truck | 1 |
248-4081 Body Gp-Truck
| 13***55 | Liner Group-Body | 1 |
| 24***89 | Body Group-Truck | 1 |
| 24***81 | Body Group-Truck | 1 |
246-9888 Body Gp-Truck
| 11***64 | Guard As; (Lh) | 1 |
| 11***65 | Guard As; (Rh) | 1 |
| 24***88 | Body Group-Truck | 1 |
128-2578 Cowling Gp
| 12***78 | Cowling Group | 1 |
| 12***97 | Fender As | 1 |
| 13***34 | Plate | 1 |
136-1810 Fender Gp
| 11***32 | Support As | 1 |
| 11***95 | Support As | 1 |
| 13***10 | Fender Group | 1 |
126-7562 Frame As
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 8 |
| 12***98 | Tube As | 1 |
| 12***62 | Frame As | 2 |
126-7561 Frame As
| 12***61 | Frame As | 2 |
| 7D***07 | Bearing-Sleeve | 2 |
126-7563 Frame Gp
| 12***63 | Frame Group | 1 |
| 12***95 | Guard As | 1 |
| 16***36 | Guard As | 1 |
136-1806 Guard Gp-Drive Shaft
| 0T***83 | Washer--Junction Box To Rear Support | 2 |
| 13***06 | Guard Group-Drive Shaft | 1 |
| 14***25 | Rail As | 1 |
136-1799 Handhold Gp -Platform
| 0T***83 | Washer--Junction Box To Rear Support | 1 |
| 10***93 | Rivet-Pop; (103 Deg Cntrsunk) | 6 |
| 10***65 | Latch As-Compartment | 1 |
136-1809 Hood Gp-Truck
| 0T***83 | Washer--Junction Box To Rear Support | 1 |
| 10***93 | Rivet-Pop; (103 Deg Cntrsunk) | 6 |
| 10***65 | Latch As-Compartment | 1 |
128-6940 Ladder Gp
| 12***25 | Ladder As | 2 |
| 12***40 | Ladder Group | 1 |
| 2A***89 | Step As | 2 |
137-3455 Liner Gp-Body
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 13***55 | Liner Group-Body | 1 |
| 15***36 | Bracket As | 1 |
155-4464 Mirror Gp-Rear View
| 03***31 | Bolt; (3/8-16x3.75-In)(Shield As. To Heads) | 2 |
| 05***88 | Washer; (13.5x30x3-mm Thk) | 4 |
| 10***22 | Shim; (8.0mm Thk) | 1 |
155-4437 Mirror Gp-Rear View
| 15***37 | Mirror Group-Rear View | 2 |
| 3B***05 | Pin Split Cotter | 2 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 2 |
136-4627 Mounting Gp-Truck Body
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 11***46 | Cover | 2 |
| 11***92 | Suspension Group-Front | 2 |
116-3092 Suspension Gp-Front
| 11***37 | Suspension Group-Rear | 2 |
| 11***92 | Suspension Group-Front | 1 |
| 12***11 | Cover | 2 |
9d-7340 Suspension & Mtg Gp-Front
| 10***68 | Piston | 1 |
| 11***61 | Seal-O-Ring | 2 |
| 11***93 | Head | 1 |
116-2837 Suspension Gp-Rear
| 03***66 | Tread-Anti-Skid | 1 |
| 11***37 | Suspension Group-Rear | 1 |
| 12***21 | Tread | 1 |
9d-7350 Suspension Gp-Rear
| 10***93 | Head | 1 |
| 10***56 | Rod As | 1 |
| 11***61 | Seal-O-Ring | 2 |
129-7234 Tread Gp-Non-Skid
| 11***90 | Walkway As | 1 |
| 11***71 | Rail As | 1 |
| 12***30 | Walkway As | 1 |
113-0656 Walkway Gp
| 11***56 | Walkway Group | 1 |
| 11***35 | Valve-Check | 1 |
| 12***51 | Ring | 1 |
Fuel System
9d-9880 Adapter Gp-Fast Fill Fuel
| 12***71 | Clamp-Hose | 1 |
| 2G***00 | Valve As-Tank | 1 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 1 |
180-6644 Drive Gp-Unit Inj Hyd Pump
| 03***01 | Bolt; --To Reverse Shaft Bearing Retainer | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 12***40 | Plate | 1 |
125-3431 Drive Gp-Unit Inj Hyd Pump
| 11***35 | Pin | 1 |
| 12***31 | Drive Group-Unit Inj Hydraulic Pump | 1 |
| 16***26 | Sensor Group-Pressure; -Atmospheric Air, Turbo Inlet | 1 |
125-3430 Drive Gp-Unit Inj Hyd Pump
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 10***27 | Gasket | 1 |
162-0149 Drive Gp-Unit Inj Hyd Pump
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 10***27 | Gasket | 1 |
174-7527 Injector Gp-Fuel
| 11***98 | Adapter-Injection | 1 |
| 11***22 | Seal-Rectangular | 1 |
| 13***69 | Bolt-Socket Head | 2 |
232-1176 Injector Gp-Fuel
| 11***98 | Adapter-Injection | 1 |
| 11***22 | Seal-Rectangular | 1 |
| 13***69 | Bolt-Socket Head | 2 |
159-0836 Injector Gp-Fuel
| 11***98 | Adapter-Injection | 1 |
| 11***22 | Seal-Rectangular | 1 |
| 13***69 | Bolt-Socket Head | 2 |
138-8756 Injector Gp-Fuel
| 11***98 | Adapter-Injection | 1 |
| 11***22 | Seal-Rectangular | 1 |
| 13***69 | Bolt-Socket Head | 2 |
138-6256 Kit-Seal -Unit Injector Hydraulic Pump
| 03***53 | Seal-O-Ring; (08.92mm Id) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***39 | Seal-O-Ring (Id=9.25mm) | 1 |
136-1813 Lines Gp-Fuel
| 12***74 | Clip-Loop; (12.7mm Id) | 1 |
| 12***30 | Bracket As | 1 |
| 13***13 | Lines Group-Fuel; -Chassis | 1 |
129-6837 Lines Gp-Fuel Filter
| 03***33 | Seal-O-Ring; (12.42mm Id) | 4 |
| 09***87 | Tee | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 1 |
151-1356 Lines Gp-Fuel Filter
| 03***33 | Seal-O-Ring; (12.42mm Id) | 4 |
| 09***87 | Tee | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 1 |
109-0399 Lines Gp-Injector Hyd Pump
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 3 |
| 10***02 | Tube As | 1 |
| 10***99 | Lines Group-Injector Hydraulic Pump | 1 |
126-7292 Pump & Mtg Gp-Unit Inj Hyd
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 4 |
108-7090 Pump Gp-Fuel Injection
| 10***26 | Clamp-Injector | 1 |
| 10***90 | Pump Group-Fuel Injection | 1 |
| 11***21 | Seal-Rectangular | 2 |
122-2513 Pump Gp-Fuel Prm & Prim Filter
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 12***13 | Pump Group-Fuel Prm & Prim Filter | 1 |
| 12***57 | Base As-Filter; (Primary Fuel Filter) | 1 |
201-4202 Pump Gp-Unit Injector Hyd
| 10***77 | Valve Group-Solenoid; -Pressure Control | 1 |
| 13***52 | Seal-O-Ring | 1 |
| 13***09 | Fitting | 2 |
169-1034 Pump Gp-Unit Injector Hyd
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 4 |
| 10***77 | Valve Group-Solenoid; -Pressure Control | 1 |
| 11***20 | Coupling | 1 |
144-0835 Pump Gp-Unit Injector Hyd
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 4 |
| 10***77 | Valve Group-Solenoid; -Pressure Control | 1 |
| 11***20 | Coupling | 1 |
201-4201 Pump Gp-Unit Injector Hyd
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 4 |
| 11***20 | Coupling | 1 |
| 14***50 | Pump Group-Fuel Transfer | 1 |
212-1439 Sender Gp-Fuel Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 21***39 | Sender Group-Fuel Level | 1 |
141-8550 Tank Gp-Fuel
| 14***50 | Tank Group-Fuel | 1 |
| 1H***05 | Block | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
136-1812 Tank Gp-Fuel
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 0S***27 | Bolt -114.30 mm(4.50 In.) Long | 1 |
| 13***18 | Plate As | 1 |
2g-9000 Valve As-Tank -Fast Fill Fuel
| 2G***00 | Valve As-Tank | 1 |
282-1915 Valve Gp-Check
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 28***15 | Valve Group-Check; -Fuel | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
102-7535 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 10***35 | Valve Group-Check; -Fuel Return Port | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
107-0677 Valve Gp-Solenoid
| 03***28 | Seal-O-Ring | 1 |
| 03***39 | Seal-O-Ring (Id=9.25mm) | 1 |
| 10***77 | Valve Group-Solenoid; -Pressure Control | 1 |
Hydraulic System
118-5081 Actuator Gp-Pilot Control -Hoist
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 11***81 | Actuator Group-Pilot Control; -Auxiliary Dual Stage, Hoist | 1 |
| 1D***86 | Bolt (3.50" Long--.625" Dia.) | 6 |
145-5252 Cylinder & Mtg Gp-Hoist
| 13***11 | Lines Group-Hoist | 1 |
| 13***12 | Lines Group-Power Train Oil | 1 |
| 13***13 | Lines Group-Hydraulic Oil Cooler | 1 |
145-5155 Cylinder Gp-Hoist -Telescoping
| 11***37 | Tube As | 1 |
| 11***32 | Block | 1 |
| 13***42 | Tube As | 1 |
151-4535 Hydraulic Ar
| 11***37 | Tube As | 1 |
| 11***32 | Block | 1 |
| 13***42 | Tube As | 1 |
135-9411 Lines Gp-Hoist
| 13***41 | Tube As | 1 |
| 13***11 | Lines Group-Hoist | 1 |
| 13***39 | Hose As | 1 |
135-9413 Lines Gp-Hydraulic Oil Cooler
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 11***68 | Gasket | 1 |
| 13***13 | Lines Group-Hydraulic Oil Cooler | 1 |
131-3753 Mounting Gp-Hydraulic Tank -Brake, Hoist
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 13***53 | Mounting Group-Hydraulic Tank; -Brake, Hoist | 1 |
| 14***08 | Flange As | 1 |
175-7051 Pump & Motor Gp-Hydraulic -Secondary Steering, Brake Release, High Speed Oil Change
| 09***95 | Pin, Dowel | 8 |
| 13***35 | Seal-Shaft | 1 |
| 14***99 | Flange | 1 |
111-8399 Pump Gp-Gear -Brake, Hoist
| 11***99 | Pump Group-Gear; -Brake Release, Hoist | 2 |
| 14***46 | Pump Group-Piston; -Steering | 1 |
| 16***08 | Bracket As | 1 |
331-8600 Pump Gp-Gear
| 11***99 | Pump Group-Gear; -Brake Release, Hoist | 1 |
| 16***08 | Bracket As | 1 |
| 17***95 | Pump Group-Piston; -Steering | 1 |
136-1805 Pump Gp-Hydraulic -Brake, Hoist, Steering
| 09***05 | Bolt-Socket Head; (M14x2x40-mm) | 4 |
| 10***79 | Cone-Bearing | 1 |
| 12***27 | Piston-Control | 1 |
219-1964 Pump Gp-Piston
| 12***24 | Plate-Valve | 1 |
| 16***79 | Pin | 3 |
| 19***26 | Barrel | 1 |
178-5195 Pump Gp-Piston -Steering
| 12***24 | Plate-Valve | 1 |
| 16***79 | Pin | 3 |
| 17***95 | Pump Group-Piston; -Steering | 1 |
145-5246 Pump Gp-Piston -Steering
| 09***05 | Bolt-Socket Head; (M14x2x40-mm) | 4 |
| 10***79 | Cone-Bearing | 1 |
| 12***94 | Plug; (Break Off) | 1 |
196-0227 Rotating Gp-Pump -Steering
| 14***29 | Valve Group-Control; -Hoist | 1 |
| 19***27 | Rotating Group-Pump; -Hydraulic Fan | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 3 |
120-5726 Rotating Gp-Pump -Steering
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 70 |
| 10***03 | Gauge-Sight; (Hydraulic Oil Level) | 1 |
6e-4006 Rotating Gp-Pump
| 16***79 | Pin | 3 |
| 19***19 | Plate | 1 |
| 19***25 | Plate | 1 |
153-2739 Tank Gp-Hydraulic -Brake, Hoist
| 15***39 | Tank Group-Hydraulic; -Brake, Hoist | 1 |
| 17***52 | Valve Group-Control; -Pulled Unit | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 3 |
151-4534 Valve & Mtg Gp-Control -Hoist
| 03***06 | Seal (Use As Required) | 1 |
| 10***83 | Valve Group | 1 |
| 10***84 | Valve Group | 1 |
194-1627 Valve & Mtg Gp-Control -Hoist
| 03***06 | Seal (Use As Required) | 1 |
| 10***83 | Valve Group | 1 |
| 10***84 | Valve Group | 1 |
175-7852 Valve Gp-Control -Hoist
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 17***52 | Valve Group-Control; -Pulled Unit | 1 |
148-3529 Valve Gp-Control -Hoist
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 14***29 | Valve Group-Control; -Hoist | 1 |
184-5173 Valve Gp-Pump Control -Pressure, Flow Compensator-Steering Pump
| 11***78 | Body | 1 |
| 11***58 | Body As | 1 |
| 11***97 | Spring | 1 |
135-6616 Valve Gp-Pump Control -Pressure, Flow Compensator-Steering Pump
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 13***16 | Valve Group-Pump Control; -Pressure, Flow Compensator-Fan, Impl Pilot, Axle Cooler | 1 |
196-0228 Valve Gp-Pump Control -Steering Pump
| 11***78 | Body | 1 |
| 19***28 | Valve Group-Pump Control; -Pressure, Flow Compensator-Steering Pump | 1 |
| 1J***97 | Valve; (Push-Pull) | 1 |
106-7372 Valve Gp-Relief -Hoist Low Pressure, Lower
| 10***72 | Valve Group-Relief; -Hoist Low Pressure, Lower | 1 |
| 11***86 | Anchor | 1 |
| 11***92 | Rod | 1 |
148-2963 Valve Gp-Relief -Hoist High Pressure, Raise
| 11***86 | Anchor | 1 |
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
Lubrication System
6n-3925 Extension Gp-Drain -Engine Oil
| 1F***74 | Elbow Block & Aftercooler | 1 |
| 6B***56 | Nipple (4" Long) | 1 |
| 6N***25 | Extension Group-Drain; -Engine Oil | 1 |
119-8583 Fastener Gp-Oil Pump Mounting -Engine
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
| 11***83 | Fastener Group-Oil Pump Mounting; -Engine | 1 |
122-5846 Filler Gp-Engine Oil
| 12***46 | Filler Group-Engine Oil | 1 |
| 12***48 | Tube As-Oil Filler | 1 |
| 12***49 | Bracket-Oil Filler | 1 |
4n-2357 Filter Gp-Engine Oil
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 1R***08 | Filter As-Engine Oil; (Advanced Efficiency)(High Efficiency) | 2 |
| 2P***03 | Base As-Oil Filter; (Engine) | 2 |
142-5682 Fitting Gp-High Spd Oil Change
| 03***65 | Elbow (45 Degrees) | 1 |
| 14***82 | Fitting Group-High Spd Oil Change | 1 |
| 1P***19 | Coupler (Use With .75 In Hose) | 1 |
136-7608 Fumes Disposal Gp
| 12***29 | Tube | 1 |
| 12***47 | Tube As | 1 |
| 13***74 | Clip-Loop | 2 |
122-2523 Gauge Gp-Oil Level (Dipstick) -Engine
| 10***59 | Spacer; (9x20x39.2-mm Thk) | 1 |
| 11***68 | Seal-O-Ring; (15.54mm Id) | 1 |
| 12***14 | Bracket As | 1 |
142-5681 Lines Gp-Engine Oil -High Speed
| 14***81 | Lines Group-Engine Oil; -High Speed | 1 |
| 3B***32 | Elbow Oil Pan Drain | 1 |
| 6B***81 | Bushing; (Reducing) | 1 |
122-1790 Lines Gp-Engine Oil
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
122-1898 Lines Gp-Engine Oil Filter
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 6 |
142-5657 Lines Gp-Prelubrication
| 09***08 | Hose As | 1 |
| 13***94 | Hose As | 1 |
| 14***57 | Lines Group-Prelubrication | 1 |
129-6833 Lines Gp-Turbocharger Oil
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 11***26 | Tube As-Drain | 1 |
142-5680 Oil Change Ar-High Speed
| 14***80 | Oil Change Ar-High Speed | 1 |
| 14***81 | Lines Group-Engine Oil; -High Speed | 1 |
| 14***82 | Fitting Group-High Spd Oil Change | 1 |
158-8892 Prelubrication Ar-Engine
| 14***57 | Lines Group-Prelubrication | 1 |
| 14***58 | Pump Group-Prelubrication | 1 |
| 15***42 | Wiring Group-Prelubrication; -Chassis | 1 |
134-1416 Pump & Motor Gp-Prelubrication
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 13***16 | Pump & Motor Group-Prelubrication; -Engine Prelubrication | 1 |
| 13***17 | Pump | 1 |
116-1980 Pump Gp-Engine Oil
| 10***82 | Shaft As-Pump Drive | 1 |
| 10***73 | Shaft As-Idler | 1 |
| 11***79 | Body As-Oil Pump | 1 |
142-5658 Pump Gp-Prelubrication
| 13***16 | Pump & Motor Group-Prelubrication; -Engine Prelubrication | 1 |
| 14***58 | Pump Group-Prelubrication | 1 |
| 2P***21 | Adapter; (1-1/16-12) | 1 |
Machine Arrangement
136-1816 Chassis Ar
| 10***10 | Brake Group; -Front Caliper | 1 |
| 11***56 | Walkway Group | 1 |
| 11***43 | Mounting Group-Cab | 1 |
131-3775 General Ar
| 13***42 | Cab Ar | 1 |
| 13***47 | Power Train Ar | 1 |
| 13***75 | General Ar | 1 |
Operator Station
2g-1150 Horn Gp-Air -Chassis
| 10***39 | Bracket | 1 |
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 1 |
| 10***86 | Hose As | 1 |
5d-6998 Horn Gp-Air
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 1 |
| 10***95 | Valve As | 1 |
| 10***96 | Gasket | 1 |
173-1028 Adjuster Gp-Seat
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 1 |
| 11***77 | Air Conditioner Group; -Cab | 1 |
| 12***51 | Hose As | 1 |
170-1111 Adjuster Gp-Seat
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
113-0746 Air Conditioner Ar
| 11***46 | Air Conditioner Ar | 1 |
| 12***07 | Compressor Group-Refrigerant | 1 |
| 14***56 | Lines Group-Air Conditioner | 1 |
118-3533 Air Conditioner Ar
| 03***26 | Retainer | 1 |
| 06***93 | Grommet; (Rh) | 1 |
| 10***43 | Plate-Orifice | 2 |
142-5655 Air Conditioner Ar
| 14***55 | Air Conditioner Ar | 1 |
| 3E***12 | Nut-Square; (3/8-16-Thd) | 1 |
| 6V***87 | Screw-Pan Head; (10-24x1-In) | 4 |
117-5177 Air Conditioner Gp
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 11***77 | Air Conditioner Group; -Cab | 1 |
| 12***98 | Plate As-Slide | 1 |
8y-5904 Armrest Gp
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***06 | Plate As | 1 |
169-8607 Armrest Gp -Rh
| 16***88 | Control Group-Retarder; -Cab | 1 |
| 16***07 | Armrest Group; -Rh-Suspension Seat | 1 |
| 17***53 | Wiring Group-Automatic Retarder; -Cab | 1 |
129-0297 Armrest Gp -Rh-Adjustable
| 10***40 | Visor Group-Cab | 1 |
| 11***76 | Heater Group-Cab | 1 |
| 12***97 | Armrest Group; -Rh-Adjustable | 1 |
131-3742 Cab Ar
| 13***42 | Cab Ar | 1 |
| 16***88 | Control Group-Retarder; -Cab | 1 |
| 17***70 | Wiring Group-Integrated Brake | 1 |
174-3750 Cab Ar
| 10***08 | Bracket As | 1 |
| 10***62 | Liner As-Cab | 1 |
| 12***05 | Cover | 1 |
174-3768 Cab Ar
| 10***83 | Liner | 1 |
| 10***88 | Glass | 1 |
| 10***89 | Glass | 1 |
136-1819 Cab Gp
| 10***83 | Liner | 1 |
| 10***86 | Liner | 1 |
| 10***89 | Glass | 1 |
137-0090 Cab Gp
| 10***83 | Liner | 1 |
| 10***86 | Liner | 1 |
| 10***89 | Glass | 1 |
128-3207 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
| 12***56 | Cover As | 1 |
3e-1906 Compressor Gp-Refrigerant
| 12***95 | Bracket | 1 |
| 1F***50 | Nut Rops Support | 2 |
| 3E***06 | Compressor Group-Refrigerant | 1 |
128-6613 Condenser & Mtg Gp-Refrigerant
| 11***18 | Clip | 1 |
| 12***13 | Condenser & Mtg Group-Refrigerant | 1 |
| 13***37 | Control Group-Hoist Electronic; -Positioning Lever | 1 |
137-0057 Console Gp-Operator
| 13***57 | Console Group-Operator | 1 |
| 13***79 | Sensor Group-Position; -Hoist Control | 1 |
| 14***23 | Lever As; (Body Dump) | 1 |
131-3761 Control Gp-Hoist
| 13***61 | Control Group-Hoist; -Cab | 1 |
| 14***00 | Screw | 2 |
| 16***11 | Kit-Handle; (Hoist Control) | 1 |
136-4837 Control Gp-Hoist Electronic
| 10***85 | Battery; (Lithium)(Internal Backup) | 1 |
| 13***37 | Control Group-Hoist Electronic; -Positioning Lever | 1 |
| 18***78 | Control Group-Payload Electronic | 1 |
146-6293 Control Gp-Monitor -Caterpillar Monitoring System
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 00***54 | Nipple-Pipe | 2 |
| 14***16 | Valve Group-Relay; (Auto Retarder Ctrl Brake Air) | 1 |
183-3561 Control Gp-Monitor -Caterpillar Monitoring System
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 2 |
| 00***54 | Nipple-Pipe | 1 |
| 14***39 | Kit-Seal & Valve; (Brake Air Relay)(Master Cylinder Relay Valve) | 1 |
103-5526 Control Gp-Monitor -Backlight Dimmer
| 10***26 | Control Group-Monitor Sys Dimmer; -Backlight Dimmer | 1 |
9x-5308 Display Gp-Payload Monitor -Operator Display
| 11***58 | Washer; (6.5x17x1-mm Thk) | 9 |
| 12***65 | Knob; (Black Plastic) | 1 |
| 12***72 | Panel As-Door; (Rh) | 1 |
9x-6847 Display Gp-Payload Monitor
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 4 |
| 10***49 | Switch As; (24-Volt)(Right Conveyor On/Off) | 1 |
9x-6846 Control Gp-Monitor -Payload
| 25***03 | Control Group-Unprogrammed; (Caterpillar Monitoring System)(Caterpillar Monitoring System) | 1 |
| 9X***46 | Control Group-Payload Electronic | 1 |
163-6388 Control Gp-Retarder
| 16***88 | Control Group-Retarder; -Cab | 1 |
| 5P***66 | Terminal-Ring; (18-Ga To 22-Ga, No. 6 Screw) | 6 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 4 |
139-5225 Control Gp-Retarder -Chassis
| 00***33 | Tee-Pipe | 1 |
| 12***61 | Valve & Mtg Group-Brake; -Automatic Retarder | 1 |
| 13***25 | Control Group-Retarder; -Chassis | 1 |
137-0077 Door Gp-Cab -Lh
| 13***77 | Door Group-Cab; -Lh | 1 |
| 5H***49 | Clip | 3 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 1 |
127-9163 Door Gp-Cab -Rh
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 4 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 10 |
8y-6883 Extension Gp-Backrest -Cloth
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 10***66 | Filter Element-Cab Air; (Standard Efficiency) | 1 |
| 11***09 | Knob-Control | 1 |
142-5646 Fastener Gp-Heater Lines -Cab Heater
| 03***26 | Retainer | 1 |
| 10***43 | Plate-Orifice | 2 |
| 10***26 | Wheel As-Blower | 2 |
117-5276 Heater Gp-Cab
| 11***76 | Heater Group-Cab | 1 |
| 2G***33 | Bracket | 1 |
| 2H***23 | Grommet (1.375" Inside Diameter) | 1 |
118-6383 Heater Gp-Cab
| 11***83 | Heater Group-Cab | 1 |
| 15***87 | Cover | 2 |
| 2G***64 | Kit-Diaphragm; (Air Horn) | 2 |
142-5654 Lines Gp-Air Conditioner -Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***61 | Plate-Instruction; (Air Conditioner Lines) | 1 |
142-5656 Lines Gp-Air Conditioner
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***56 | Lines Group-Air Conditioner | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
6v-1970 Literature Gp
| 11***52 | Sensor & Mtg Group-Payload | 1 |
| 13***13 | Wiring Group-Sensor; -Payload Monitoring | 1 |
| 14***28 | Wiring Group-Monitor; -Payload | 1 |
125-6806 Module Gp-Speedometer & Tach
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***06 | Module Group-Speedometer & Tach | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
142-9905 Monitor Ar-Payload
| 14***05 | Monitor Ar-Payload | 1 |
| 16***42 | Mount; (Cab) | 32 |
| 16***27 | Sleeve | 12 |
147-7975 Motor Gp-Window Wiper
| 14***75 | Motor Group-Window Wiper; -Cab Door, Lh | 1 |
| 3B***53 | Bolt- 114.30 mm(4.50 In.) Long | 4 |
| 5P***48 | Washer--Bracket To L.H. Support Rail | 4 |
117-5043 Mounting Gp-Cab
| 10***23 | Shaft As-Lumbar | 1 |
| 10***24 | Pan-Lumbar | 1 |
| 11***43 | Mounting Group-Cab | 1 |
159-5279 Mounting Gp-Platform
| 11***04 | Cushion As-Back | 1 |
| 13***43 | Plate As-Lumbar | 1 |
| 15***79 | Mounting Group-Platform | 1 |
186-3059 Pan Gp-Backrest -Cloth
| 18***59 | Pan Group-Backrest; -Cloth | 1 |
| 3K***97 | Pin 3.18 mm(.125 In.) Diameter | 4 |
| 6V***56 | Ring-Retaining | 2 |
162-7776 Pan Gp-Backrest
| 13***43 | Plate As-Lumbar | 1 |
| 16***76 | Pan Group-Backrest; -Lumbar, Suspension Seat | 1 |
| 16***83 | Knob-Lumbar | 1 |
108-8421 Pan Gp-Backrest -Lumbar
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
| 11***04 | Cushion As-Back | 1 |
| 13***43 | Plate As-Lumbar | 1 |
218-0864 Pan Gp-Backrest -Cloth
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***09 | Knob-Control | 1 |
8y-5992 Pan Gp-Seat
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***06 | Module Group-Speedometer & Tach | 1 |
| 12***95 | Gasket-Panel | 1 |
173-1072 Panel Gp-Instrument
| 12***31 | Cover | 1 |
| 13***24 | Plate As | 1 |
| 13***38 | Pedal As | 1 |
140-8488 Panel Gp-Instrument
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***06 | Module Group-Speedometer & Tach | 1 |
| 12***95 | Gasket-Panel | 1 |
183-4464 Panel Gp-Instrument
| 12***31 | Cover | 1 |
| 13***24 | Plate As | 1 |
| 13***38 | Pedal As | 1 |
140-8489 Panel Gp-Instrument
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***09 | Knob-Control | 1 |
137-0013 Pedal Gp-Governor
| 13***13 | Pedal Group-Governor | 1 |
| 14***06 | Support As | 1 |
| 14***29 | Cover As | 1 |
159-5278 Platform Ar
| 14***06 | Support As | 1 |
| 14***29 | Cover As | 1 |
| 15***86 | Cover As; (Access)(Bat Disconnect, Mach Lockout) | 1 |
188-2786 Platform Gp -Rh
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 16***46 | Spring | 1 |
137-5925 Platform Gp
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 13***08 | Latch-Recliner | 1 |
| 13***09 | Gear As-Lh | 1 |
168-6873 Recliner Gp-Seat
| 0T***44 | Bolt (1.25" Long) | 1 |
| 0T***89 | Cap Screw (2" Long) | 1 |
| 16***73 | Recliner Group-Seat; -Lumbar, Suspension | 1 |
186-3058 Recliner Gp-Seat
| 18***58 | Recliner Group-Seat; -Suspension | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 1L***80 | Bolt; (7/16-20x1.5-In) | 1 |
156-3804 Seat Belt Gp -Operator
| 06***03 | Shim (.060mm Thk); (1.52-mm Thk) | 4 |
| 09***78 | Pin-Spring | 1 |
| 09***14 | Pin, Clevis | 1 |
156-1148 Seat Belt Gp -Retractable-Operator
| 12***82 | Seat Group | 1 |
| 12***97 | Armrest Group; -Rh-Adjustable | 1 |
| 15***48 | Seat Belt Group; -Retractable-Operator | 2 |
156-1146 Seat Belt Gp -Retractable
| 15***46 | Seat Belt Group; -Retractable | 1 |
162-8449 Seat Gp
| 11***89 | Extension Group-Backrest | 1 |
| 16***49 | Seat Group; -Air | 1 |
| 16***07 | Armrest Group; -Rh-Suspension Seat | 1 |
169-9506 Seat Gp -Operator
| 09***93 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 16***06 | Seat Group; -Operator-Air | 1 |
186-3056 Seat Gp -Cloth
| 12***16 | Seat Group | 1 |
| 13***74 | Support As | 1 |
| 15***19 | Suspension Group-Seat | 1 |
186-3051 Seat Gp -Cloth
| 09***93 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
128-0616 Seat Gp
| 09***43 | Pin-Cotter | 2 |
| 11***06 | Cushion As | 1 |
| 12***16 | Seat Group | 1 |
128-7982 Seat Gp
| 0T***89 | Cap Screw (2" Long) | 1 |
| 11***89 | Extension Group-Backrest | 1 |
| 11***02 | Cover | 1 |
137-0091 Seat Gp-Companion
| 13***91 | Seat Group-Companion | 1 |
| 16***80 | Bolt-Socket Head; (3/8-16x0.375-In) | 1 |
| 16***16 | Suspension Group-Seat; -Adjustable-Operator | 1 |
175-3401 Seat Gp-Suspension -Air
| 10***17 | Bumper | 2 |
| 12***57 | Shaft | 2 |
| 12***28 | Kit-Roller; (Incls Parts Marked S) | 1 |
180-7309 Seat Gp-Suspension -Cloth, Lumbar
| 10***17 | Bumper | 2 |
| 12***57 | Shaft | 2 |
| 12***28 | Kit-Roller; (Incls Parts Marked S) | 1 |
136-4624 Seat Gp-Suspension
| 13***24 | Seat Group-Suspension | 1 |
| 16***07 | Seat Group-Suspension; -Air | 1 |
| 17***02 | Support As | 1 |
169-9507 Seat Gp-Suspension -Air
| 13***74 | Support As | 1 |
| 16***07 | Seat Group-Suspension; -Air | 1 |
| 18***09 | Seat Group-Suspension; -Cloth, Lumbar | 1 |
199-5727 Suspension Gp-Seat -Air
| 11***29 | Boot | 1 |
| 19***27 | Suspension Group-Seat; -Air | 1 |
| 20***70 | Valve As | 1 |
169-8716 Suspension Gp-Seat
| 05***12 | Cartridge As | 1 |
| 06***04 | Ring-Retaining | 1 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 2 |
150-7719 Suspension Gp-Seat
| 10***03 | Fastener | 26 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
| 14***26 | Film-Instruction; (Seat Adjustment) | 1 |
143-8994 Valve Gp-Air Control -Service Brake Pedal
| 14***94 | Valve Group-Air Control; -Service Brake Pedal | 1 |
| 17***76 | Valve As | 1 |
| 2G***43 | Handle | 1 |
153-8338 Valve Gp-Air Control -Secondary Brake Pedal
| 00***89 | Valve As-Drain | 2 |
| 15***38 | Valve Group-Air Control; -Secondary Brake Pedal | 1 |
| 1L***79 | Elbow-Pipe; (3/8 In Pipe) | 2 |
165-2136 Valve Gp-Air Control -Manual Retarder
| 16***36 | Valve Group-Air Control; -Manual Retarder | 1 |
| 1D***77 | Bolt-Round Head; (3/8-16x1-In) | 2 |
| 2S***17 | Nut,Plain,Castellat; (3/8-16-Thd) | 1 |
142-5647 Valve Gp-Shutoff -Cab Heater
| 11***28 | Fitting | 1 |
| 14***47 | Valve Group-Shutoff; -Cab Heater-Engine To Cab Heater | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
106-8340 Visor Gp-Cab
| 10***40 | Visor Group-Cab | 1 |
| 16***81 | Bottle-Washer | 1 |
| 16***62 | Cover As; (Window Washer) | 1 |
163-1877 Washer Gp-Window -Cab
| 16***77 | Washer Group-Window; -Cab | 1 |
| 2G***18 | Nut | 2 |
| 5K***05 | Nut-Barrel; (6-32-Thd) | 2 |
156-1854 Washer Gp-Window -Cab
| 15***54 | Washer Group-Window; -Cab | 1 |
| 2G***12 | Window As; (Lh) | 1 |
| 6G***75 | Kit-Handle; (Lh)(Vent Window) | 1 |
2g-0263 Window Gp -Door, Lh
| 2G***63 | Window Group; -Door, Lh | 1 |
| 2V***31 | Catch | 1 |
| 3V***96 | Lock As-Window | 1 |
8w-6212 Window Gp -Door, Rh
| 13***35 | Blade As-Wiper; (650-mm) | 1 |
| 13***88 | Clip | 2 |
| 13***95 | Nozzle As-Washer | 1 |
8w-6211 Window Gp-Cab -Door, Rh
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 2J***61 | Ring-Retaining | 1 |
156-1855 Wiper Gp-Window -Front
| 15***55 | Wiper Group-Window; -Front | 1 |
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
Power Train
6p-5901 Mounting Gp-Torque Converter
| 06***11 | Ring-Retaining | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 8 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 3 |
9w-4119 Actuator Gp-Rotary -Transmission
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 22 |
| 1B***86 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 1P***79 | Flange (Half) | 4 |
145-8314 Case & Parts Gp-Planetary
| 14***03 | Lines Group-Traction Aid | 1 |
| 14***14 | Case & Parts Group-Planetary | 1 |
| 15***43 | Wiring Group-Sensor; -Wheel Speed | 1 |
136-3176 Control Ar-Traction
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
3t-1510 Control Gp-Transmission Hyd
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
145-8315 Cover Gp-Shipping -Transmission
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 12 |
| 10***31 | Seal As | 1 |
| 10***84 | Cage-Bearing | 1 |
9d-6130 Differential & Bevel Gear Gp
| 10***58 | Nut; (2-1/8-Thd) | 4 |
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 8 |
| 3D***09 | Dowel (.625" Long) | 8 |
6g-7560 Differential Gp
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 70 |
| 10***29 | Hub | 2 |
| 14***67 | Gear-Sun; (20-Teeth) | 2 |
132-5447 Filter Gp-Oil -Power Train
| 03***60 | Cup-Roller Bearing | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 10 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 2 |
8x-9981 Drive Gp-Final
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 2 |
9g-9625 Gear Gp-Transfer -Input
| 5J***04 | Boss; (3/8-16-Thd) | 4 |
| 8F***36 | Lug -Weld To Push Frame Strut; (3/8-16x0.75-In) | 12 |
| 8J***96 | Lug; (3/8-16-Thd) | 2 |
2g-0627 Housing As-Rear Axle
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
| 1D***14 | Bolt--Front Support To Frame | 8 |
| 1D***23 | Bolt 215.9 mm(8.5 In.) Long; Bolt Head To Cylinder Block | 2 |
198-5950 Housing Gp-Rear Axle
| 10***57 | Elbow | 1 |
| 13***11 | Hose As | 1 |
| 14***74 | Elbow As | 1 |
9d-6140 Housing Gp-Rear Axle
| 2D***45 | Stud 6.63 cm(2.609 In.) Long | 8 |
| 2G***27 | Housing As-Rear Axle | 1 |
| 5D***01 | Plug | 1 |
142-5743 Lines Gp-Power Train Cooler
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 1 |
| 13***47 | Filter Group-Oil; -Hydraulic-Power Train | 1 |
| 13***58 | Tube As | 1 |
135-9412 Lines Gp-Power Train Oil
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 12***96 | Hose As-Orfs | 1 |
| 12***52 | Valve Group-Lockup Clutch & Sol; -Torque Converter | 1 |
144-5325 Lines Gp-Torque Converter
| 14***32 | Hose As | 1 |
| 14***25 | Lines Group-Torque Converter | 1 |
| 2T***88 | Hose As | 2 |
141-1903 Lines Gp-Traction Aid
| 14***03 | Lines Group-Traction Aid | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
| 7X***08 | Washer-Hard; (10.2x16x2-mm Thk) | 2 |
117-3915 Motor Gp-Electric -Engine Prelubrication-Sec Steering, Brake Release
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 11 |
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
9g-9628 Planetary Gp-Transmission
| 13***06 | Guard Group-Drive Shaft | 1 |
| 14***07 | Transmission Ar | 1 |
| 2A***70 | Brake Group-Service & Parking; -Rear | 1 |
131-3747 Power Train Ar
| 11***65 | Body As-Oil Pump | 1 |
| 11***56 | Gear As-Oil Pump; (8-Teeth) | 1 |
| 11***58 | Gear As-Oil Pump; (8-Teeth) | 1 |
111-6842 Pump & Drive Gp-Gear -Transmission Charge, Scavenge
| 11***29 | Gear-Oil Pump Drive; (56-Teeth) | 1 |
| 11***41 | Pump Group-Gear; -Transmission Charge, Scavenge | 1 |
| 11***42 | Pump Group-Gear; (Transmission Charge, Scavenge)(Powertrain Scavenge & Charging) | 1 |
111-6841 Pump Gp-Gear -Transmission Charge, Scavenge
| 11***41 | Pump Group-Gear; -Transmission Charge, Scavenge | 1 |
| 2A***13 | Rim As | 1 |
| 3D***45 | Flange | 2 |
143-2137 Rim Gp
| 14***37 | Rim Group | 7 |
| 2D***08 | Grommmet | 1 |
| 2D***09 | Locknut; (11/16-16-Thd) | 1 |
7i-5032 Rim Gp-Demountable
| 14***37 | Rim Group | 1 |
| 2D***08 | Grommmet | 1 |
| 2D***09 | Locknut; (11/16-16-Thd) | 1 |
114-9220 Rim Gp-Single
| 11***20 | Rim Group-Single | 1 |
| 15***08 | Slip Joint Group | 1 |
| 9V***11 | Bolt-12 Point Head; (1/2-20x2.25-In) | 8 |
9d-3520 Shaft Gp-Drive -Main
| 15***09 | Slip Joint Group | 1 |
| 15***10 | Slip Joint Group | 1 |
| 17***34 | Slip Joint Group | 1 |
157-2010 Slip Joint Gp
| 15***10 | Slip Joint Group | 1 |
| 17***35 | Tube & Yoke As | 1 |
| 17***38 | Seal | 1 |
172-7634 Slip Joint Gp
| 14***37 | Rim Group | 1 |
| 17***34 | Slip Joint Group | 1 |
| 2D***08 | Grommmet | 1 |
157-2009 Slip Joint Gp
| 15***09 | Slip Joint Group | 1 |
| 15***11 | Tube & Yoke As | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
157-2008 Slip Joint Gp
| 15***08 | Slip Joint Group | 1 |
| 3H***22 | Grease Nipple (Service Replacement Only) | 1 |
| 8W***12 | Spider & Bearing Group | 2 |
136-0478 Tire & Rim Gp
| 10***68 | Torque Converter Group | 1 |
| 11***42 | Pump Group-Gear; (Transmission Charge, Scavenge)(Powertrain Scavenge & Charging) | 1 |
| 13***78 | Tire & Rim Group | 1 |
142-5742 Torque Converter Ar
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 44 |
| 13***02 | Seal-Lip-Type | 1 |
1t-1213 Torque Converter Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 44 |
| 13***02 | Seal-Lip-Type | 1 |
1t-2046 Torque Converter Gp
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 13 |
| 10***03 | Gauge-Sight; (Hydraulic Oil Level) | 2 |
| 10***36 | Housing As-Torque Converter | 1 |
108-1868 Torque Converter Gp
| 03***21 | Bolt-Allen Hd; (3/8unc X 1) | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 13 |
| 10***03 | Gauge-Sight; (Hydraulic Oil Level) | 2 |
145-7407 Transmission Ar
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
| 12***80 | Stop | 1 |
| 14***07 | Transmission Ar | 1 |
3t-1511 Valve Gp-Transmission Control
| 0L***69 | Bolt (5/8-11 Thd X 3.750 In Long | 35 |
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 35 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
128-2352 Valve Gp-Lockup Clutch & Sol
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 6 |
| 12***52 | Valve Group-Lockup Clutch & Sol; -Torque Converter | 1 |
| 12***80 | Stop | 1 |
3t-1513 Valve Gp-Pressure Control -Clutch Oil Flow
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 14***46 | Plug-Pipe | 1 |
| 1L***62 | Ring-Retaining | 1 |
8p-1471 Valve Gp-Relief
| 03***30 | Bolt-Self Locking; (5/16unc X 3/4) | 1 |
| 12***33 | Spring As | 2 |
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 1 |
3t-1512 Valve Gp-Selector & Press Cont -Transmission
| 03***30 | Bolt-Self Locking; (5/16unc X 3/4) | 1 |
| 12***33 | Spring As | 2 |
| 13***45 | Pin-Spring | 1 |
7x-1120 Valve Gp-Solenoid
| 12***48 | Kit-Seal; (Solenoid Valve) | 0 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
| 16***43 | Washer-Identification; (16.8x38.1x.5mm Thk) | 1 |
9g-9988 Valve Gp-Solenoid
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 10***11 | Cartridge As | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
193-8559 Valve Gp-Solenoid
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 10 |
144-6292 Valve Gp-Solenoid
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Cartridge As | 1 |
3t-0062 Valve Gp-Solenoid
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 10***70 | Locknut; (1/4-20-Thd) | 1 |
| 3T***62 | Valve Group-Solenoid; (Traction Control Proportional) | 1 |
9g-9208 Valve Gp-Traction Control
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 1 |
| 1D***41 | Bolt 3.00 In.(7.62 cm) Long | 12 |
| 1F***11 | Bolt 3.50 In. (8.89 cm) Long | 1 |
137-6821 Wheel Ar-Final Drive & Brake
| 0L***69 | Bolt (5/8-11 Thd X 3.750 In Long | 35 |
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 35 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
8x-9972 Wheel Gp-Rear
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 20 |
| 13***50 | Retainer-Seal | 2 |
| 17***36 | Spindle | 2 |
Service Equipment And Supplies
9g-9288 Cap Gp-Protection -Hydraulic Tank-Steering Tank Fill Cap-Hydraulic Tank Fill Cap
| 12***98 | Film-Stripe | 1 |
| 12***99 | Film-Stripe | 1 |
| 14***98 | Film-Stripe | 1 |
5t-6942 Cap Gp-Protection
| 13***76 | Film-Stripe; (130-cm) | 0 |
| 13***77 | Film-Stripe; (411-cm) | 0 |
| 5T***42 | Cap Group-Protection; -Transmission Tank Fill Cap | 1 |
140-0038 Film Gp
| 13***08 | Film-Notice; (Radio) | 1 |
| 13***42 | Film-Instruction; (Retarding Guidelines) | 1 |
| 13***34 | Film-Instruction; (Retarding Guidelines) | 1 |
133-9496 Film Gp
| 12***28 | Film-Notice; (Radio) | 1 |
| 13***96 | Film-Instruction; (Retarding Guidelines)(769d Only) | 1 |
| 13***97 | Film-Instruction; (Retarding Guidelines)(771d Only) | 1 |
140-0101 Film Gp-Cab -French
| 13***10 | Film-Notice; (Radio) | 1 |
| 13***44 | Film-Instruction; (Retarding Guidelines) | 1 |
| 13***36 | Film-Instruction; (Retarding Guidelines) | 1 |
185-1668 Film Gp-Cab -Norwegian
| 10***08 | Film-Information; (Engine Oil)(Install On Oil Filter Cap) | 1 |
| 14***38 | Film Group | 1 |
| 14***53 | Film-Warning; (Diesel Fuel) | 1 |
140-0109 Film Gp-Cab -Arabic
| 13***18 | Film-Notice; (Radio) | 1 |
| 13***52 | Film-Instruction; (Retarding Guidelines) | 1 |
| 13***44 | Film-Instruction; (Retarding Guidelines) | 1 |
185-3550 Film Gp-Cab -Finnish
| 10***37 | Film-Warning; (Electrical Shock Hazard) | 4 |
| 11***61 | Film-Information; (Engine Oil) | 1 |
| 14***01 | Film Group-Cab; -French | 1 |
140-0107 Film Gp-Cab -Greek
| 13***37 | Film-Notice; (Radio)(Radio) | 1 |
| 13***50 | Film-Instruction; (Retarding Guidelines) | 1 |
| 13***37 | Film-Instruction; (Retarding Guidelines) | 1 |
137-6403 Film Gp-Cab
| 13***09 | Film-Notice; (Radio) | 1 |
| 13***43 | Film-Instruction; (Retarding Guidelines) | 1 |
| 13***35 | Film-Instruction; (Retarding Guidelines) | 1 |
140-0108 Film Gp-Cab -Dutch
| 13***16 | Film-Notice; (Radio) | 1 |
| 13***51 | Film-Instruction; (Retarding Guidelines) | 1 |
| 13***43 | Film-Instruction; (Retarding Guidelines) | 1 |
140-0106 Film Gp-Cab -Danish
| 13***15 | Film-Notice; (Radio) | 1 |
| 13***49 | Film-Instruction; (Retarding Guidelines) | 1 |
| 13***41 | Film-Instruction; (Retarding Guidelines) | 1 |
140-0104 Film Gp-Cab -German
| 13***13 | Film-Notice; (Radio) | 1 |
| 13***47 | Film-Instruction; (Retarding Guidelines) | 1 |
| 13***39 | Film-Instruction; (Retarding Guidelines) | 1 |
140-0110 Film Gp-Cab -Japanese
| 13***21 | Tag-Warning; (Shipping Brackets)(Shipping Brackets) | 1 |
| 14***10 | Film Group-Cab; -Japanese | 1 |
| 14***16 | Film-Instruction; (Retarding Guidelines)(769d Only) | 1 |
140-0103 Film Gp-Cab -Portuguese
| 13***12 | Film-Notice; (Radio) | 1 |
| 13***46 | Film-Instruction; (Retarding Guidelines) | 1 |
| 13***38 | Film-Instruction; (Retarding Guidelines) | 1 |
140-0111 Film Gp-Cab -Swedish
| 13***21 | Tag-Warning; (Shipping Brackets)(Shipping Brackets) | 1 |
| 14***11 | Film Group-Cab; -Swedish | 1 |
| 14***36 | Film-Instruction; (Retarding Guidelines) | 1 |
140-0105 Film Gp-Cab -Italian
| 13***14 | Film-Notice; (Radio) | 1 |
| 13***48 | Film-Instruction; (Retarding Guidelines) | 1 |
| 13***40 | Film-Instruction; (Retarding Guidelines) | 1 |
140-0102 Film Gp-Cab -Spanish
| 13***11 | Film-Notice; (Radio) | 1 |
| 13***45 | Film-Instruction; (Retarding Guidelines) | 1 |
| 13***37 | Film-Instruction; (Retarding Guidelines) | 1 |
140-0123 Plate & Film Gp -French
| 10***39 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 4 |
| 11***66 | Film-Information; (Engine Oil) | 1 |
| 14***03 | Film Group-Cab; -Portuguese | 1 |
140-0124 Plate & Film Gp -Spanish
| 10***40 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 4 |
| 11***62 | Film-Information; (Engine Oil) | 1 |
| 14***04 | Film Group-Cab; -German | 1 |
140-0127 Plate & Film Gp -Italian
| 10***43 | Film-Warning; (Unit Injector) | 4 |
| 11***63 | Film-Information; (Engine Oil) | 1 |
| 14***07 | Film Group-Cab; -Greek | 1 |
185-1665 Plate & Film Gp -Norwegian
| 18***65 | Plate & Film Group; -Norwegian | 1 |
140-0132 Plate & Film Gp -Japanese
| 10***08 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 13***42 | Film-Instruction; (Hydraulic Accumulator) | 2 |
| 14***32 | Plate & Film Group; -Japanese | 1 |
140-0125 Plate & Film Gp -Portuguese
| 10***41 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 4 |
| 11***65 | Film-Information; (Engine Oil) | 1 |
| 14***05 | Film Group-Cab; -Italian | 1 |
140-0128 Plate & Film Gp -Danish
| 10***44 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 4 |
| 11***60 | Film-Information; (Engine Oil) | 1 |
| 14***08 | Film Group-Cab; -Dutch | 1 |
140-0126 Plate & Film Gp -German
| 10***42 | Film-Warning; (Elec Shock Hazard, Danish) | 4 |
| 11***70 | Film-Information; (Engine Oil) | 1 |
| 14***06 | Film Group-Cab; -Danish | 1 |
140-0133 Plate & Film Gp -Swedish
| 10***09 | Film-Warning; (Jumper Cables) | 1 |
| 12***15 | Film-Warning | 4 |
| 13***43 | Film-Instruction; (Hydraulic Accumulator)(Replaces 8t***76) | 2 |
185-3548 Plate & Film Gp -Finnish
| 18***48 | Plate & Film Group; -Finnish | 1 |
140-0131 Plate & Film Gp -Arabic
| 10***99 | Film-Warning; (High Pressure Cylinder)(High Pressure Cylinder) | 4 |
| 10***23 | Film-Instruction; (Hydraulic Accumulator) | 2 |
| 10***48 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 4 |
140-0129 Plate & Film Gp -Greek
| 10***23 | Film-Warning; (High Pressure Cylinder) | 2 |
| 10***23 | Film-Warning; (High Pressure Cylinder) | 4 |
| 10***25 | Film-Warning; (High Pressure Cylinder) | 2 |
136-1818 Plate & Film Gp
| 10***38 | Film-Warning; (Unit Injector) | 4 |
| 11***68 | Film-Information; (Engine Oil) | 1 |
| 13***18 | Plate & Film Group | 1 |
140-0130 Plate & Film Gp -Dutch
| 10***28 | Film-Instruction; (Hydraulic Accumulator)(Japanese) | 2 |
| 10***45 | Film-Warning; (Unit Injector) | 4 |
| 11***64 | Film-Information; (Engine Oil) | 1 |
131-0357 Plate-Warning -Stopping
| 13***57 | Plate-Warning; -Stopping | 1 |
Steering System
136-1804 Cylinder & Mtg Gp-Steering
| 10***58 | Cylinder As | 1 |
| 10***60 | Rod As | 1 |
| 10***17 | Washer; (36.7x77x6-mm Thk) | 1 |
105-3357 Cylinder Gp-Steering
| 10***36 | Seal-O-Ring; (49.28mm Id) | 1 |
| 10***57 | Cylinder Group-Steering | 1 |
| 12***13 | Filter-Oil; (Ultra High Efficiency)(Hydraulic, Pilot) | 1 |
173-0159 Filter Gp-Oil -Steering Pump Case Drain
| 11***16 | Valve & Mounting Group; -Secondary Steering | 1 |
| 12***55 | Pump & Motor Group-Sec Steering | 1 |
| 13***84 | Clip | 5 |
135-9417 Lines Gp-Secondary Steering
| 13***84 | Clip | 5 |
| 13***17 | Lines Group-Secondary Steering | 1 |
| 13***28 | Hose As | 1 |
194-1100 Lines Gp-Secondary Steering
| 10***93 | Stud-Taperlock; (3/8-16x2.36-In)(3/8-16x60 Thd) | 2 |
| 12***27 | Valve Group-Check & Relief; -Steering | 1 |
| 13***00 | Tube As | 1 |
194-1099 Lines Gp-Steering
| 12***05 | Clamp As | 2 |
| 13***63 | Arm-Center | 1 |
| 13***64 | Arm-Steering | 2 |
135-9416 Lines Gp-Steering
| 10***93 | Stud-Taperlock; (3/8-16x2.36-In)(3/8-16x60 Thd) | 2 |
| 13***00 | Tube As | 1 |
| 13***01 | Tube As | 1 |
9d-6280 Link Gp-Steering
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 11***68 | Gasket | 1 |
| 15***23 | Pump Group-Gear; -Sec Steering, Brake Release | 1 |
128-4855 Pump & Motor Gp-Sec Steering
| 09***95 | Pin, Dowel | 8 |
| 12***55 | Pump & Motor Group-Sec Steering | 1 |
| 13***35 | Seal-Shaft | 1 |
154-3023 Pump Gp-Gear -Sec Steering, Brake Release
| 09***66 | Bolt; (M8x1.25x75-mm) | 7 |
| 11***06 | Plug | 2 |
| 11***08 | Spring | 2 |
192-4286 Pump Gp-Metering -Hmu
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***89 | Adapter | 2 |
129-2372 Pump Gp-Metering -Steering
| 12***72 | Pump Group-Metering; -Steering | 1 |
| 14***61 | Race-Bearing | 2 |
| 25***12 | Kit-Seal; (Hmu Steering) | 1 |
210-6592 Steering Column Gp
| 12***72 | Pump Group-Metering; -Steering | 1 |
| 13***70 | Wheel-Steering | 1 |
| 13***39 | Grommet; (17.5 Thk)(3 Hole) | 1 |
179-1258 Steering Column Gp
| 17***58 | Steering Column Group | 1 |
| 18***34 | Kit-Column; (Core) | 1 |
| 18***35 | Nut; (7/8-20-Thd) | 1 |
340-1167 Steering Column Gp-Adjustable
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***39 | Grommet; (17.5 Thk)(3 Hole) | 1 |
162-4227 Steering Gear Gp
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 41 |
170-8018 Tank & Filter Gp-Steering
| 17***18 | Tank & Filter Group-Steering | 2 |
| 5C***65 | Bolt-Plt; (1/2unc X 1 1/8) | 6 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 8 |
120-6107 Tank & Filter Gp-Steering
| 12***07 | Tank & Filter Group-Steering | 2 |
| 5C***65 | Bolt-Plt; (1/2unc X 1 1/8) | 6 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 8 |
169-9520 Tank Gp-Hydraulic
| 15***39 | Valve Group-Solenoid | 1 |
| 16***20 | Tank Group-Hydraulic | 1 |
| 7T***45 | Manifold-Solenoid Valve | 1 |
136-3328 Tank Gp-Hydraulic
| 13***28 | Tank Group-Hydraulic | 1 |
| 7T***45 | Manifold-Solenoid Valve | 1 |
| 8T***92 | Valve Group-Solenoid; (Ride Control) | 1 |
110-1216 Valve & Mounting Gp -Secondary Steering
| 10***10 | Valve-Check; (Steering) | 2 |
| 10***11 | Plug; (5/16-12 Thd) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
175-7050 Valve Gp-Check & Relief -Steering
| 17***50 | Valve Group-Check & Relief; -Steering Lines Pressure | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 5P***99 | Ring-To Clutch Piston Pins | 1 |
128-6027 Valve Gp-Check & Relief -Steering
| 12***27 | Valve Group-Check & Relief; -Steering | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 5P***99 | Ring-To Clutch Piston Pins | 1 |
114-1267 Valve Gp-Pressure Reducing -Steering
| 11***67 | Valve Group-Pressure Reducing; -Steering-Pilot | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***41 | Spring | 1 |
252-8039 Valve Gp-Pressure Reducing
| 25***39 | Valve Group-Pressure Reducing; -Secondary | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***41 | Spring | 1 |
128-6148 Valve Gp-Relief -Primary Steering
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 12***48 | Valve Group-Relief; -Primary Steering | 1 |
| 15***38 | Cartridge Assem. | 1 |
108-2185 Valve Gp-Relief -Primary Steering
| 10***70 | Locknut; (1/4-20-Thd) | 1 |
| 10***85 | Valve Group-Relief; -Primary-Primary Steering | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
4t-2742 Valve Gp-Relief -Secondary Steering
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***41 | Spring | 1 |
| 4T***42 | Valve Group-Relief; -Secondary Steering | 1 |
9t-9194 Valve Gp-Relief -Secondary Steering
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***42 | Spring | 1 |
| 4T***71 | Plate | 1 |
152-8340 Valve Gp-Solenoid
| 07***41 | Seal; (30.3mm Od) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***74 | Solenoid As-Proportional; (Pilot Control Actuator) | 1 |
152-8339 Valve Gp-Solenoid
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 12 |
| 13***27 | Spindle | 2 |
| 13***29 | Seal Group-Duo-Cone; (Front Wheel) | 2 |
8t-8692 Valve Gp-Solenoid
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 15***38 | Cartridge Assem. | 1 |
| 19***01 | Kit-Seal; (Solenoid Valve) | 1 |
6g-8241 Wheel Gp-Front
| 14***55 | Cylinder Group-Hoist; -Telescoping | 2 |
| 5P***66 | Capscrew; (Hex Hd) (1/2-13 Nc X 1 1/2) (Gd 8 Z) | 4 |
| 6G***41 | Wheel Group-Front | 1 |
775D serial number reference
The PIN/serial plate is a riveted metal tag mounted on the left side of the front frame rail near the cab step, readable from ground level; the number is also often die-stamped into the frame itself near the plate. On these mid/late-1990s trucks the plate shows an 8-character serial: a 3-character prefix (letters/numbers, e.g. 6KR or 8AS) followed by a 5-digit sequence number unique to that production block. On later-issued full 17-character PINs the same 3-character prefix appears as characters 4-6, right after the plant/model code.
| Prefix | Identifies | Notes |
|---|---|---|
| 6KR | 775D Truck, early production block | Cat 3412E diesel, seven-speed planetary powershift transmission, flat-floor quarry body. Earliest 775D serial block; operation and maintenance manual covering this range is dated 1997 and pairs it with the sibling 773D under a separate prefix. Sequence starts at 6KR1; parts-manual editions also reference 6KR124-Up as a later cab/component cutoff within the same block. |
| 8AS | 775D Quarry Truck, later production block | Cat 3412E diesel, same quarry-truck configuration as the 6KR block. Documented as a distinct serial break starting at 8AS1/8AS00001 in electrical schematic (dated 1999), repair, and parts documentation tied specifically to the 775D. Exact calendar-year cutover from 6KR to 8AS is not documented in sources checked - confirm with dealer for the precise transition point. |
Frequently asked questions
What engine does the Caterpillar 775D use?
A Cat 3412E, a 12-cylinder turbocharged-aftercooled diesel of 27.0 L (1648 in3) displacement, rated 541 kW (725 hp) gross power and 517 kW (693 hp) net/flywheel power, paired with a seven-speed powershift transmission and torque converter.
What is the operating weight of the Caterpillar 775D?
Empty weight runs about 43,200 kg (95,240 lb). Fully loaded, gross machine weight reaches roughly 106,600 kg (235,000 lb), for a rated payload near 63,400 kg (139,770 lb).
What replaced the Caterpillar 775D?
The Cat 775E replaced the 775D around 2002, followed by the 775F in 2006 and later G-series and next-generation 775 trucks. The 3412E-powered driveline carried into the 775E largely unchanged before Cat moved to newer engine platforms in later series.
What 775D owners discuss
What's the reputation of the 775D's transmission and torque converter?
The 775D runs a seven-speed electronically controlled powershift with a lock-up torque converter. This end of the drivetrain has a fairly quiet reputation compared to the engine and injector side. Standard troubleshooting logic for this type of Cat powershift applies: good drive in some gears but not others, combined with a high stall speed at the converter, points to a converter or clutch-pack problem rather than the pump. Weak drive across all gears usually traces back to low charge pressure at the transmission pump, so checking pump output and oil condition is the first step before opening the transmission itself. Specific 775D transmission failure patterns aren't widely discussed publicly, so treat this as general guidance for the drivetrain type. Have your dealer verify with Cat ET before any teardown.
What engine quirks show up on the 775D's Cat 3412E versus later 775-series trucks?
The 775D is built around the 12-cylinder Cat 3412E, a HEUI-injected V12. This is a different engine family than the C27 used in the later 775E/775F generation, so injector, wiring, and overhaul discussion for those newer trucks doesn't carry over directly. On the 3412E, individual injector failure is the most commonly reported issue, usually showing up as a rough idle or uneven running on one bank rather than a system-wide fault. HEUI pump bearing wear has also been reported, which sheds metal into the oil and eventually contaminates injectors, so oil sampling matters here. On engines that have sat for a week or more in cool weather, a check valve in the injector oil-return circuit (used on later-production injector sets) can cause noticeably harder starting; cycling the key a few extra times to build oil pressure before cranking is a common workaround. Have your dealer verify any suspected injector fault with Cat ET before swapping parts.
How does the 775D's brake and hoist hydraulic system behave, and what causes complaints?
The 775D uses oil-cooled multi-disc brakes at all four wheels, and the brake circuit shares its hydraulic supply with the body-hoist system rather than running fully separate reservoirs. When both hoist response and brake feel go soft at the same time, techs point first to tank level, suction screens, and pump cavitation rather than the pump itself. Drag from brake discs that don't fully release is called out repeatedly as the leading cause of premature wet-brake wear: unexplained heat in a brake housing after a shift is a sign of drag, not normal wear. Regular oil sampling of the brake/hoist circuit, watching for iron, bronze, and copper, catches disc and separator-plate wear before it becomes a performance complaint. Any braking or retarder concern is safety-critical. Have your dealer verify before returning the truck to a loaded haul road.
What tire and wear patterns are typical for a 775D running quarry duty?
On the 24.00-R35 radials this truck runs, most premature tire failures trace back to haul-road condition rather than tread wear itself. Spillage left at the crusher, hopper, or loading area causes sidewall cuts and punctures more often than normal wear does. Keeping haul lanes at roughly double the truck's width reduces scrubbing damage in corners. Loader operators centering the load in the body rather than piling it to one side is repeatedly cited as one of the biggest levers on tire life, since off-center loading pushes extra weight onto one rear tire and accelerates its wear. Keeping haul-road grades in the single digits (roughly 5-8 percent) where the site layout allows also reduces slip-related wear on tread and final drives alike.
How long do the final drives and planetaries last under quarry duty?
Planetary final drives on this class of Cat rigid truck are generally figured around 15,000 hours under normal duty, but severe quarry conditions (abrasive material, tight-cycle face loading) can pull that down to roughly 8,000-10,000 hours if planetary oil sampling and change intervals aren't tightened for the application. Compressing the planetary oil-change interval for severe duty rather than sticking to the standard schedule is a common recommendation from people running these trucks hard. Actual life varies a lot by application, load practices, and maintenance history, so treat these as ballpark figures, not guarantees, and confirm current interval recommendations with your dealer.
What electrical and sensor issues come up most on this era of Cat truck?
Intermittent engine speed/timing sensor faults are a recurring complaint on 3412E-powered Cat equipment of this era, and they're more often a wiring problem than a bad sensor. Corroded or loose connectors, chafed harness sections, and an out-of-spec sensor air gap can all produce the same fault code. A simple wiggle test on suspect harness sections while watching for the fault to flicker or clear is the standard first diagnostic step, done before condemning the sensor itself. Oil or moisture working into injector and sensor connector housings is also a known cause of intermittent misfire and overvoltage-type faults that look like a component failure but are really a connector problem. These trucks predate the more integrated in-cab monitoring used on later Cat trucks, so diagnosis leans on a shop laptop running Cat ET connected to the engine ECM rather than an onboard display. Have your dealer verify any persistent or safety-relevant fault code rather than just clearing it and continuing to run.
What should you check when buying a used 775D?
Start with the frame: look for cracks or repair welds around spring hangers, cross-members, and dump-body mounts, and be suspicious of any sag or uneven stance that could point to a bent or overloaded frame. Pull maintenance and oil-sample history if the seller has it, especially for the engine, the shared brake/hoist system, and the final-drive planetaries, since wear on all three shows up in trending oil analysis before it shows up as a complaint. Check remaining tire tread and look the sidewalls over for cuts consistent with rock spillage rather than normal wear. Cycle the body up and watch hoist speed and creep-down rate with the engine at low idle, since a hoist or brake system that's already marginal will show it here. Confirm hours align with engine and powertrain condition rather than just trusting the hour meter, and match the serial/PIN plate against the paperwork and engine serial to rule out mismatched components from a rebuild. Given the frame and brake system are structural and safety items, have your dealer verify condition on any truck you're seriously considering before it goes back to work.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar 775D. Related factory variants of the same model family:
775D
Need a specific 775D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.